Merge tag 'staging-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging and IIO updates from Greg KH:
 "Here is the "big" staging and IIO driver update for 4.15-rc1.

  Lots and lots of little changes, almost all minor code cleanups as the
  Outreachy application process happened during this development cycle.
  Also happened was a lot of IIO driver activity, and the typec USB code
  moving out of staging to drivers/usb (same commits are in the USB tree
  on a persistent branch to not cause merge issues.)

  Overall, it's a wash, I think we added a few hundred more lines than
  removed, but really only a few thousand were modified at all.

  All of these have been in linux-next for a while. There might be a
  merge issue with Al's vfs tree in the pi433 driver (take his changes,
  they are always better), and the media tree with some of the odd
  atomisp cleanups (take the media tree's version)"

* tag 'staging-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (507 commits)
  staging: lustre: add SPDX identifiers to all lustre files
  staging: greybus: Remove redundant license text
  staging: greybus: add SPDX identifiers to all greybus driver files
  staging: ccree: simplify ioread/iowrite
  staging: ccree: simplify registers access
  staging: ccree: simplify error handling logic
  staging: ccree: remove dead code
  staging: ccree: handle limiting of DMA masks
  staging: ccree: copy IV to DMAable memory
  staging: fbtft: remove redundant initialization of buf
  staging: sm750fb: Fix parameter mistake in poke32
  staging: wilc1000: Fix bssid buffer offset in Txq
  staging: fbtft: fb_ssd1331: fix mirrored display
  staging: android: Fix checkpatch.pl error
  staging: greybus: loopback: convert loopback to use generic async operations
  staging: greybus: operation: add private data with get/set accessors
  staging: greybus: loopback: Fix iteration count on async path
  staging: greybus: loopback: Hold per-connection mutex across operations
  staging: greybus/loopback: use ktime_get() for time intervals
  staging: fsl-dpaa2/eth: Extra headroom in RX buffers
  ...

9 files changed, 90 insertions, 6 deletions

diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
index 7eead5f97e0295..2e3f919485f49f 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@@ -522,6 +522,7 @@ Description:
 		Specifies the output powerdown mode.
 		DAC output stage is disconnected from the amplifier and
 		1kohm_to_gnd: connected to ground via an 1kOhm resistor,
+		2.5kohm_to_gnd: connected to ground via a 2.5kOhm resistor,
 		6kohm_to_gnd: connected to ground via a 6kOhm resistor,
 		20kohm_to_gnd: connected to ground via a 20kOhm resistor,
 		90kohm_to_gnd: connected to ground via a 90kOhm resistor,
@@ -1242,9 +1243,9 @@ What:		/sys/.../iio:deviceX/in_distance_raw
 KernelVersion:	4.0
 Contact:	linux-iio@vger.kernel.org
 Description:
-		This attribute is used to read the distance covered by the user
-		since the last reboot while activated. Units after application
-		of scale are meters.
+		This attribute is used to read the measured distance to an object
+		or the distance covered by the user since the last reboot while
+		activated. Units after application of scale are meters.
 
 What:		/sys/bus/iio/devices/iio:deviceX/store_eeprom
 KernelVersion:	3.4.0
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-cros-ec b/Documentation/ABI/testing/sysfs-bus-iio-cros-ec
index 297b9720f02412..0e95c2ca105ca8 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio-cros-ec
+++ b/Documentation/ABI/testing/sysfs-bus-iio-cros-ec
@@ -16,3 +16,13 @@ Description:
                 the motion sensor is placed. For example, in a laptop a motion
                 sensor can be located on the base or on the lid. Current valid
 		values are 'base' and 'lid'.
+
+What:		/sys/bus/iio/devices/iio:deviceX/id
+Date:		Septembre 2017
+KernelVersion:	4.14
+Contact:	linux-iio@vger.kernel.org
+Description:
+		This attribute is exposed by the CrOS EC legacy accelerometer
+		driver and represents the sensor ID as exposed by the EC. This
+		ID is used by the Android sensor service hardware abstraction
+		layer (sensor HAL) through the Android container on ChromeOS.
diff --git a/Documentation/devicetree/bindings/iio/adc/mcp320x.txt b/Documentation/devicetree/bindings/iio/adc/mcp320x.txt
index bcd3ac8e6e0c57..7d64753df94930 100644
--- a/Documentation/devicetree/bindings/iio/adc/mcp320x.txt
+++ b/Documentation/devicetree/bindings/iio/adc/mcp320x.txt
@@ -29,15 +29,29 @@ Required properties:
 				"microchip,mcp3204"
 				"microchip,mcp3208"
 				"microchip,mcp3301"
+				"microchip,mcp3550-50"
+				"microchip,mcp3550-60"
+				"microchip,mcp3551"
+				"microchip,mcp3553"
 
 			NOTE: The use of the compatibles with no vendor prefix
 			is deprecated and only listed because old DT use them.
 
+	- spi-cpha, spi-cpol (boolean):
+			Either SPI mode (0,0) or (1,1) must be used, so specify
+			none or both of spi-cpha, spi-cpol.  The MCP3550/1/3
+			is more efficient in mode (1,1) as only 3 instead of
+			4 bytes need to be read from the ADC, but not all SPI
+			masters support it.
+
+	- vref-supply:	Phandle to the external reference voltage supply.
+
 Examples:
 spi_controller {
 	mcp3x0x@0 {
 		compatible = "mcp3002";
 		reg = <0>;
 		spi-max-frequency = <1000000>;
+		vref-supply = <&vref_reg>;
 	};
 };
diff --git a/Documentation/devicetree/bindings/iio/adc/mt6577_auxadc.txt b/Documentation/devicetree/bindings/iio/adc/mt6577_auxadc.txt
index 64dc4843c1803a..0df9befdaecca6 100644
--- a/Documentation/devicetree/bindings/iio/adc/mt6577_auxadc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/mt6577_auxadc.txt
@@ -12,6 +12,7 @@ for the Thermal Controller which holds a phandle to the AUXADC.
 Required properties:
   - compatible: Should be one of:
     - "mediatek,mt2701-auxadc": For MT2701 family of SoCs
+    - "mediatek,mt2712-auxadc": For MT2712 family of SoCs
     - "mediatek,mt7622-auxadc": For MT7622 family of SoCs
     - "mediatek,mt8173-auxadc": For MT8173 family of SoCs
   - reg: Address range of the AUXADC unit.
diff --git a/Documentation/devicetree/bindings/iio/dac/ds4424.txt b/Documentation/devicetree/bindings/iio/dac/ds4424.txt
new file mode 100644
index 00000000000000..eaebbf8dab40a1
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/ds4424.txt
@@ -0,0 +1,20 @@
+Maxim Integrated DS4422/DS4424 7-bit Sink/Source Current DAC Device Driver
+
+Datasheet publicly available at:
+https://datasheets.maximintegrated.com/en/ds/DS4422-DS4424.pdf
+
+Required properties:
+	- compatible: Should be one of
+		maxim,ds4422
+		maxim,ds4424
+	- reg: Should contain the DAC I2C address
+
+Optional properties:
+	- vcc-supply: Power supply is optional. If not defined, driver will ignore it.
+
+Example:
+	ds4224@10 {
+		compatible = "maxim,ds4424";
+		reg = <0x10>; /* When A0, A1 pins are ground */
+		vcc-supply = <&vcc_3v3>;
+	};
diff --git a/Documentation/devicetree/bindings/iio/dac/ti-dac082s085.txt b/Documentation/devicetree/bindings/iio/dac/ti-dac082s085.txt
new file mode 100644
index 00000000000000..9cb0e10df704aa
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/ti-dac082s085.txt
@@ -0,0 +1,34 @@
+Texas Instruments 8/10/12-bit 2/4-channel DAC driver
+
+Required properties:
+ - compatible:		Must be one of:
+			"ti,dac082s085"
+			"ti,dac102s085"
+			"ti,dac122s085"
+			"ti,dac084s085"
+			"ti,dac104s085"
+			"ti,dac124s085"
+ - reg: 		Chip select number.
+ - spi-cpha, spi-cpol:	SPI mode (0,1) or (1,0) must be used, so specify
+			either spi-cpha or spi-cpol (but not both).
+ - vref-supply: 	Phandle to the external reference voltage supply.
+
+For other required and optional properties of SPI slave nodes please refer to
+../../spi/spi-bus.txt.
+
+Example:
+	vref_2v5_reg: regulator-vref {
+		compatible = "regulator-fixed";
+		regulator-name = "2v5";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	dac@0 {
+		compatible = "ti,dac082s085";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+		spi-cpol;
+		vref-supply = <&vref_2v5_reg>;
+	};
diff --git a/Documentation/devicetree/bindings/iio/health/max30100.txt b/Documentation/devicetree/bindings/iio/health/max30100.txt
index 295a9edfa4fdcf..8d8176459d0966 100644
--- a/Documentation/devicetree/bindings/iio/health/max30100.txt
+++ b/Documentation/devicetree/bindings/iio/health/max30100.txt
@@ -20,9 +20,9 @@ Optional properties:
 
 Example:
 
-max30100@057 {
+max30100@57 {
 	compatible = "maxim,max30100";
-	reg = <57>;
+	reg = <0x57>;
 	maxim,led-current-microamp = <24000 50000>;
 	interrupt-parent = <&gpio1>;
 	interrupts = <16 2>;
diff --git a/Documentation/devicetree/bindings/iio/health/max30102.txt b/Documentation/devicetree/bindings/iio/health/max30102.txt
index c695e7cbeefb9d..8629c18b0e78fb 100644
--- a/Documentation/devicetree/bindings/iio/health/max30102.txt
+++ b/Documentation/devicetree/bindings/iio/health/max30102.txt
@@ -20,7 +20,7 @@ Optional properties:
 
 Example:
 
-max30100@57 {
+max30102@57 {
 	compatible = "maxim,max30102";
 	reg = <0x57>;
 	maxim,red-led-current-microamp = <7000>;
diff --git a/Documentation/devicetree/bindings/iio/st-sensors.txt b/Documentation/devicetree/bindings/iio/st-sensors.txt
index 9ec6f5ce54fca5..6f626f73417ee6 100644
--- a/Documentation/devicetree/bindings/iio/st-sensors.txt
+++ b/Documentation/devicetree/bindings/iio/st-sensors.txt
@@ -46,6 +46,8 @@ Accelerometers:
 - st,h3lis331dl-accel
 - st,lng2dm-accel
 - st,lis3l02dq
+- st,lis2dw12
+- st,lis3dhh
 
 Gyroscopes:
 - st,l3g4200d-gyro
@@ -71,3 +73,5 @@ Pressure sensors:
 - st,lps25h-press
 - st,lps331ap-press
 - st,lps22hb-press
+- st,lps33hw
+- st,lps35hw