Merge patch series "bpf, riscv: use BPF prog pack allocator in BPF JIT"

Puranjay Mohan <puranjay12@gmail.com> says:

Here is some data to prove the V2 fixes the problem:

Without this series:
root@rv-selftester:~/src/kselftest/bpf# time ./test_tag
test_tag: OK (40945 tests)

real    7m47.562s
user    0m24.145s
sys     6m37.064s

With this series applied:
root@rv-selftester:~/src/selftest/bpf# time ./test_tag
test_tag: OK (40945 tests)

real    7m29.472s
user    0m25.865s
sys     6m18.401s

BPF programs currently consume a page each on RISCV. For systems with many BPF
programs, this adds significant pressure to instruction TLB. High iTLB pressure
usually causes slow down for the whole system.

Song Liu introduced the BPF prog pack allocator[1] to mitigate the above issue.
It packs multiple BPF programs into a single huge page. It is currently only
enabled for the x86_64 BPF JIT.

I enabled this allocator on the ARM64 BPF JIT[2]. It is being reviewed now.

This patch series enables the BPF prog pack allocator for the RISCV BPF JIT.

======================================================
Performance Analysis of prog pack allocator on RISCV64
======================================================

Test setup:
===========

Host machine: Debian GNU/Linux 11 (bullseye)
Qemu Version: QEMU emulator version 8.0.3 (Debian 1:8.0.3+dfsg-1)
u-boot-qemu Version: 2023.07+dfsg-1
opensbi Version: 1.3-1

To test the performance of the BPF prog pack allocator on RV, a stresser
tool[4] linked below was built. This tool loads 8 BPF programs on the system and
triggers 5 of them in an infinite loop by doing system calls.

The runner script starts 20 instances of the above which loads 8*20=160 BPF
programs on the system, 5*20=100 of which are being constantly triggered.
The script is passed a command which would be run in the above environment.

The script was run with following perf command:
./run.sh "perf stat -a \
        -e iTLB-load-misses \
        -e dTLB-load-misses  \
        -e dTLB-store-misses \
        -e instructions \
        --timeout 60000"

The output of the above command is discussed below before and after enabling the
BPF prog pack allocator.

The tests were run on qemu-system-riscv64 with 8 cpus, 16G memory. The rootfs
was created using Bjorn's riscv-cross-builder[5] docker container linked below.

Results
=======

Before enabling prog pack allocator:
------------------------------------

Performance counter stats for 'system wide':

           4939048      iTLB-load-misses
           5468689      dTLB-load-misses
            465234      dTLB-store-misses
     1441082097998      instructions

      60.045791200 seconds time elapsed

After enabling prog pack allocator:
-----------------------------------

Performance counter stats for 'system wide':

           3430035      iTLB-load-misses
           5008745      dTLB-load-misses
            409944      dTLB-store-misses
     1441535637988      instructions

      60.046296600 seconds time elapsed

Improvements in metrics
=======================

It was expected that the iTLB-load-misses would decrease as now a single huge
page is used to keep all the BPF programs compared to a single page for each
program earlier.

--------------------------------------------
The improvement in iTLB-load-misses: -30.5 %
--------------------------------------------

I repeated this expriment more than 100 times in different setups and the
improvement was always greater than 30%.

This patch series is boot tested on the Starfive VisionFive 2 board[6].
The performance analysis was not done on the board because it doesn't
expose iTLB-load-misses, etc. The stresser program was run on the board to test
the loading and unloading of BPF programs

[1] https://lore.kernel.org/bpf/20220204185742.271030-1-song@kernel.org/
[2] https://lore.kernel.org/all/20230626085811.3192402-1-puranjay12@gmail.com/
[3] https://lore.kernel.org/all/20230626085811.3192402-2-puranjay12@gmail.com/
[4] https://github.com/puranjaymohan/BPF-Allocator-Bench
[5] https://github.com/bjoto/riscv-cross-builder
[6] https://www.starfivetech.com/en/site/boards

* b4-shazam-merge:
  bpf, riscv: use prog pack allocator in the BPF JIT
  riscv: implement a memset like function for text
  riscv: extend patch_text_nosync() for multiple pages
  bpf: make bpf_prog_pack allocator portable

Link: https://lore.kernel.org/r/20230831131229.497941-1-puranjay12@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

6 files changed, 255 insertions, 37 deletions

diff --git a/arch/riscv/include/asm/patch.h b/arch/riscv/include/asm/patch.h
index 63c98833d5105d..e88b52d39eac76 100644
--- a/arch/riscv/include/asm/patch.h
+++ b/arch/riscv/include/asm/patch.h
@@ -7,6 +7,7 @@
 #define _ASM_RISCV_PATCH_H
 
 int patch_text_nosync(void *addr, const void *insns, size_t len);
+int patch_text_set_nosync(void *addr, u8 c, size_t len);
 int patch_text(void *addr, u32 *insns, int ninsns);
 
 extern int riscv_patch_in_stop_machine;
diff --git a/arch/riscv/kernel/patch.c b/arch/riscv/kernel/patch.c
index 575e71d6c8ae2d..13ee7bf589a15e 100644
--- a/arch/riscv/kernel/patch.c
+++ b/arch/riscv/kernel/patch.c
@@ -6,6 +6,7 @@
 #include <linux/spinlock.h>
 #include <linux/mm.h>
 #include <linux/memory.h>
+#include <linux/string.h>
 #include <linux/uaccess.h>
 #include <linux/stop_machine.h>
 #include <asm/kprobes.h>
@@ -53,13 +54,52 @@ static void patch_unmap(int fixmap)
 }
 NOKPROBE_SYMBOL(patch_unmap);
 
-static int patch_insn_write(void *addr, const void *insn, size_t len)
+static int __patch_insn_set(void *addr, u8 c, size_t len)
+{
+	void *waddr = addr;
+	bool across_pages = (((uintptr_t)addr & ~PAGE_MASK) + len) > PAGE_SIZE;
+
+	/*
+	 * Only two pages can be mapped at a time for writing.
+	 */
+	if (len + offset_in_page(addr) > 2 * PAGE_SIZE)
+		return -EINVAL;
+	/*
+	 * Before reaching here, it was expected to lock the text_mutex
+	 * already, so we don't need to give another lock here and could
+	 * ensure that it was safe between each cores.
+	 */
+	lockdep_assert_held(&text_mutex);
+
+	if (across_pages)
+		patch_map(addr + PAGE_SIZE, FIX_TEXT_POKE1);
+
+	waddr = patch_map(addr, FIX_TEXT_POKE0);
+
+	memset(waddr, c, len);
+
+	patch_unmap(FIX_TEXT_POKE0);
+
+	if (across_pages)
+		patch_unmap(FIX_TEXT_POKE1);
+
+	return 0;
+}
+NOKPROBE_SYMBOL(__patch_insn_set);
+
+static int __patch_insn_write(void *addr, const void *insn, size_t len)
 {
 	void *waddr = addr;
 	bool across_pages = (((uintptr_t) addr & ~PAGE_MASK) + len) > PAGE_SIZE;
 	int ret;
 
 	/*
+	 * Only two pages can be mapped at a time for writing.
+	 */
+	if (len + offset_in_page(addr) > 2 * PAGE_SIZE)
+		return -EINVAL;
+
+	/*
 	 * Before reaching here, it was expected to lock the text_mutex
 	 * already, so we don't need to give another lock here and could
 	 * ensure that it was safe between each cores.
@@ -74,7 +114,7 @@ static int patch_insn_write(void *addr, const void *insn, size_t len)
 		lockdep_assert_held(&text_mutex);
 
 	if (across_pages)
-		patch_map(addr + len, FIX_TEXT_POKE1);
+		patch_map(addr + PAGE_SIZE, FIX_TEXT_POKE1);
 
 	waddr = patch_map(addr, FIX_TEXT_POKE0);
 
@@ -87,15 +127,79 @@ static int patch_insn_write(void *addr, const void *insn, size_t len)
 
 	return ret;
 }
-NOKPROBE_SYMBOL(patch_insn_write);
+NOKPROBE_SYMBOL(__patch_insn_write);
 #else
-static int patch_insn_write(void *addr, const void *insn, size_t len)
+static int __patch_insn_set(void *addr, u8 c, size_t len)
+{
+	memset(addr, c, len);
+
+	return 0;
+}
+NOKPROBE_SYMBOL(__patch_insn_set);
+
+static int __patch_insn_write(void *addr, const void *insn, size_t len)
 {
 	return copy_to_kernel_nofault(addr, insn, len);
 }
-NOKPROBE_SYMBOL(patch_insn_write);
+NOKPROBE_SYMBOL(__patch_insn_write);
 #endif /* CONFIG_MMU */
 
+static int patch_insn_set(void *addr, u8 c, size_t len)
+{
+	size_t patched = 0;
+	size_t size;
+	int ret = 0;
+
+	/*
+	 * __patch_insn_set() can only work on 2 pages at a time so call it in a
+	 * loop with len <= 2 * PAGE_SIZE.
+	 */
+	while (patched < len && !ret) {
+		size = min_t(size_t, PAGE_SIZE * 2 - offset_in_page(addr + patched), len - patched);
+		ret = __patch_insn_set(addr + patched, c, size);
+
+		patched += size;
+	}
+
+	return ret;
+}
+NOKPROBE_SYMBOL(patch_insn_set);
+
+int patch_text_set_nosync(void *addr, u8 c, size_t len)
+{
+	u32 *tp = addr;
+	int ret;
+
+	ret = patch_insn_set(tp, c, len);
+
+	if (!ret)
+		flush_icache_range((uintptr_t)tp, (uintptr_t)tp + len);
+
+	return ret;
+}
+NOKPROBE_SYMBOL(patch_text_set_nosync);
+
+static int patch_insn_write(void *addr, const void *insn, size_t len)
+{
+	size_t patched = 0;
+	size_t size;
+	int ret = 0;
+
+	/*
+	 * Copy the instructions to the destination address, two pages at a time
+	 * because __patch_insn_write() can only handle len <= 2 * PAGE_SIZE.
+	 */
+	while (patched < len && !ret) {
+		size = min_t(size_t, PAGE_SIZE * 2 - offset_in_page(addr + patched), len - patched);
+		ret = __patch_insn_write(addr + patched, insn + patched, size);
+
+		patched += size;
+	}
+
+	return ret;
+}
+NOKPROBE_SYMBOL(patch_insn_write);
+
 int patch_text_nosync(void *addr, const void *insns, size_t len)
 {
 	u32 *tp = addr;
diff --git a/arch/riscv/net/bpf_jit.h b/arch/riscv/net/bpf_jit.h
index d21c6c92a683d9..a5ce1ab76ecee0 100644
--- a/arch/riscv/net/bpf_jit.h
+++ b/arch/riscv/net/bpf_jit.h
@@ -68,6 +68,7 @@ static inline bool is_creg(u8 reg)
 struct rv_jit_context {
 	struct bpf_prog *prog;
 	u16 *insns;		/* RV insns */
+	u16 *ro_insns;
 	int ninsns;
 	int prologue_len;
 	int epilogue_offset;
@@ -85,7 +86,9 @@ static inline int ninsns_rvoff(int ninsns)
 
 struct rv_jit_data {
 	struct bpf_binary_header *header;
+	struct bpf_binary_header *ro_header;
 	u8 *image;
+	u8 *ro_image;
 	struct rv_jit_context ctx;
 };
 
diff --git a/arch/riscv/net/bpf_jit_comp64.c b/arch/riscv/net/bpf_jit_comp64.c
index 8423f4ddf8f5f5..ecd3ae6f411679 100644
--- a/arch/riscv/net/bpf_jit_comp64.c
+++ b/arch/riscv/net/bpf_jit_comp64.c
@@ -144,7 +144,11 @@ static bool in_auipc_jalr_range(s64 val)
 /* Emit fixed-length instructions for address */
 static int emit_addr(u8 rd, u64 addr, bool extra_pass, struct rv_jit_context *ctx)
 {
-	u64 ip = (u64)(ctx->insns + ctx->ninsns);
+	/*
+	 * Use the ro_insns(RX) to calculate the offset as the BPF program will
+	 * finally run from this memory region.
+	 */
+	u64 ip = (u64)(ctx->ro_insns + ctx->ninsns);
 	s64 off = addr - ip;
 	s64 upper = (off + (1 << 11)) >> 12;
 	s64 lower = off & 0xfff;
@@ -464,8 +468,12 @@ static int emit_call(u64 addr, bool fixed_addr, struct rv_jit_context *ctx)
 	s64 off = 0;
 	u64 ip;
 
-	if (addr && ctx->insns) {
-		ip = (u64)(long)(ctx->insns + ctx->ninsns);
+	if (addr && ctx->insns && ctx->ro_insns) {
+		/*
+		 * Use the ro_insns(RX) to calculate the offset as the BPF
+		 * program will finally run from this memory region.
+		 */
+		ip = (u64)(long)(ctx->ro_insns + ctx->ninsns);
 		off = addr - ip;
 	}
 
@@ -578,9 +586,10 @@ static int add_exception_handler(const struct bpf_insn *insn,
 {
 	struct exception_table_entry *ex;
 	unsigned long pc;
-	off_t offset;
+	off_t ins_offset;
+	off_t fixup_offset;
 
-	if (!ctx->insns || !ctx->prog->aux->extable ||
+	if (!ctx->insns || !ctx->ro_insns || !ctx->prog->aux->extable ||
 	    (BPF_MODE(insn->code) != BPF_PROBE_MEM && BPF_MODE(insn->code) != BPF_PROBE_MEMSX))
 		return 0;
 
@@ -594,12 +603,17 @@ static int add_exception_handler(const struct bpf_insn *insn,
 		return -EINVAL;
 
 	ex = &ctx->prog->aux->extable[ctx->nexentries];
-	pc = (unsigned long)&ctx->insns[ctx->ninsns - insn_len];
+	pc = (unsigned long)&ctx->ro_insns[ctx->ninsns - insn_len];
 
-	offset = pc - (long)&ex->insn;
-	if (WARN_ON_ONCE(offset >= 0 || offset < INT_MIN))
+	/*
+	 * This is the relative offset of the instruction that may fault from
+	 * the exception table itself. This will be written to the exception
+	 * table and if this instruction faults, the destination register will
+	 * be set to '0' and the execution will jump to the next instruction.
+	 */
+	ins_offset = pc - (long)&ex->insn;
+	if (WARN_ON_ONCE(ins_offset >= 0 || ins_offset < INT_MIN))
 		return -ERANGE;
-	ex->insn = offset;
 
 	/*
 	 * Since the extable follows the program, the fixup offset is always
@@ -608,12 +622,25 @@ static int add_exception_handler(const struct bpf_insn *insn,
 	 * bits. We don't need to worry about buildtime or runtime sort
 	 * modifying the upper bits because the table is already sorted, and
 	 * isn't part of the main exception table.
+	 *
+	 * The fixup_offset is set to the next instruction from the instruction
+	 * that may fault. The execution will jump to this after handling the
+	 * fault.
 	 */
-	offset = (long)&ex->fixup - (pc + insn_len * sizeof(u16));
-	if (!FIELD_FIT(BPF_FIXUP_OFFSET_MASK, offset))
+	fixup_offset = (long)&ex->fixup - (pc + insn_len * sizeof(u16));
+	if (!FIELD_FIT(BPF_FIXUP_OFFSET_MASK, fixup_offset))
 		return -ERANGE;
 
-	ex->fixup = FIELD_PREP(BPF_FIXUP_OFFSET_MASK, offset) |
+	/*
+	 * The offsets above have been calculated using the RO buffer but we
+	 * need to use the R/W buffer for writes.
+	 * switch ex to rw buffer for writing.
+	 */
+	ex = (void *)ctx->insns + ((void *)ex - (void *)ctx->ro_insns);
+
+	ex->insn = ins_offset;
+
+	ex->fixup = FIELD_PREP(BPF_FIXUP_OFFSET_MASK, fixup_offset) |
 		FIELD_PREP(BPF_FIXUP_REG_MASK, dst_reg);
 	ex->type = EX_TYPE_BPF;
 
@@ -1007,6 +1034,7 @@ int arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, void *image,
 
 	ctx.ninsns = 0;
 	ctx.insns = NULL;
+	ctx.ro_insns = NULL;
 	ret = __arch_prepare_bpf_trampoline(im, m, tlinks, func_addr, flags, &ctx);
 	if (ret < 0)
 		return ret;
@@ -1015,7 +1043,15 @@ int arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, void *image,
 		return -EFBIG;
 
 	ctx.ninsns = 0;
+	/*
+	 * The bpf_int_jit_compile() uses a RW buffer (ctx.insns) to write the
+	 * JITed instructions and later copies it to a RX region (ctx.ro_insns).
+	 * It also uses ctx.ro_insns to calculate offsets for jumps etc. As the
+	 * trampoline image uses the same memory area for writing and execution,
+	 * both ctx.insns and ctx.ro_insns can be set to image.
+	 */
 	ctx.insns = image;
+	ctx.ro_insns = image;
 	ret = __arch_prepare_bpf_trampoline(im, m, tlinks, func_addr, flags, &ctx);
 	if (ret < 0)
 		return ret;
diff --git a/arch/riscv/net/bpf_jit_core.c b/arch/riscv/net/bpf_jit_core.c
index 7a26a3e1c73cfe..7b70ccb7fec345 100644
--- a/arch/riscv/net/bpf_jit_core.c
+++ b/arch/riscv/net/bpf_jit_core.c
@@ -8,6 +8,8 @@
 
 #include <linux/bpf.h>
 #include <linux/filter.h>
+#include <linux/memory.h>
+#include <asm/patch.h>
 #include "bpf_jit.h"
 
 /* Number of iterations to try until offsets converge. */
@@ -117,16 +119,24 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
 				sizeof(struct exception_table_entry);
 			prog_size = sizeof(*ctx->insns) * ctx->ninsns;
 
-			jit_data->header =
-				bpf_jit_binary_alloc(prog_size + extable_size,
-						     &jit_data->image,
-						     sizeof(u32),
-						     bpf_fill_ill_insns);
-			if (!jit_data->header) {
+			jit_data->ro_header =
+				bpf_jit_binary_pack_alloc(prog_size + extable_size,
+							  &jit_data->ro_image, sizeof(u32),
+							  &jit_data->header, &jit_data->image,
+							  bpf_fill_ill_insns);
+			if (!jit_data->ro_header) {
 				prog = orig_prog;
 				goto out_offset;
 			}
 
+			/*
+			 * Use the image(RW) for writing the JITed instructions. But also save
+			 * the ro_image(RX) for calculating the offsets in the image. The RW
+			 * image will be later copied to the RX image from where the program
+			 * will run. The bpf_jit_binary_pack_finalize() will do this copy in the
+			 * final step.
+			 */
+			ctx->ro_insns = (u16 *)jit_data->ro_image;
 			ctx->insns = (u16 *)jit_data->image;
 			/*
 			 * Now, when the image is allocated, the image can
@@ -138,14 +148,12 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
 
 	if (i == NR_JIT_ITERATIONS) {
 		pr_err("bpf-jit: image did not converge in <%d passes!\n", i);
-		if (jit_data->header)
-			bpf_jit_binary_free(jit_data->header);
 		prog = orig_prog;
-		goto out_offset;
+		goto out_free_hdr;
 	}
 
 	if (extable_size)
-		prog->aux->extable = (void *)ctx->insns + prog_size;
+		prog->aux->extable = (void *)ctx->ro_insns + prog_size;
 
 skip_init_ctx:
 	pass++;
@@ -154,23 +162,33 @@ skip_init_ctx:
 
 	bpf_jit_build_prologue(ctx);
 	if (build_body(ctx, extra_pass, NULL)) {
-		bpf_jit_binary_free(jit_data->header);
 		prog = orig_prog;
-		goto out_offset;
+		goto out_free_hdr;
 	}
 	bpf_jit_build_epilogue(ctx);
 
 	if (bpf_jit_enable > 1)
 		bpf_jit_dump(prog->len, prog_size, pass, ctx->insns);
 
-	prog->bpf_func = (void *)ctx->insns;
+	prog->bpf_func = (void *)ctx->ro_insns;
 	prog->jited = 1;
 	prog->jited_len = prog_size;
 
-	bpf_flush_icache(jit_data->header, ctx->insns + ctx->ninsns);
-
 	if (!prog->is_func || extra_pass) {
-		bpf_jit_binary_lock_ro(jit_data->header);
+		if (WARN_ON(bpf_jit_binary_pack_finalize(prog, jit_data->ro_header,
+							 jit_data->header))) {
+			/* ro_header has been freed */
+			jit_data->ro_header = NULL;
+			prog = orig_prog;
+			goto out_offset;
+		}
+		/*
+		 * The instructions have now been copied to the ROX region from
+		 * where they will execute.
+		 * Write any modified data cache blocks out to memory and
+		 * invalidate the corresponding blocks in the instruction cache.
+		 */
+		bpf_flush_icache(jit_data->ro_header, ctx->ro_insns + ctx->ninsns);
 		for (i = 0; i < prog->len; i++)
 			ctx->offset[i] = ninsns_rvoff(ctx->offset[i]);
 		bpf_prog_fill_jited_linfo(prog, ctx->offset);
@@ -185,6 +203,14 @@ out:
 		bpf_jit_prog_release_other(prog, prog == orig_prog ?
 					   tmp : orig_prog);
 	return prog;
+
+out_free_hdr:
+	if (jit_data->header) {
+		bpf_arch_text_copy(&jit_data->ro_header->size, &jit_data->header->size,
+				   sizeof(jit_data->header->size));
+		bpf_jit_binary_pack_free(jit_data->ro_header, jit_data->header);
+	}
+	goto out_offset;
 }
 
 u64 bpf_jit_alloc_exec_limit(void)
@@ -204,3 +230,51 @@ void bpf_jit_free_exec(void *addr)
 {
 	return vfree(addr);
 }
+
+void *bpf_arch_text_copy(void *dst, void *src, size_t len)
+{
+	int ret;
+
+	mutex_lock(&text_mutex);
+	ret = patch_text_nosync(dst, src, len);
+	mutex_unlock(&text_mutex);
+
+	if (ret)
+		return ERR_PTR(-EINVAL);
+
+	return dst;
+}
+
+int bpf_arch_text_invalidate(void *dst, size_t len)
+{
+	int ret;
+
+	mutex_lock(&text_mutex);
+	ret = patch_text_set_nosync(dst, 0, len);
+	mutex_unlock(&text_mutex);
+
+	return ret;
+}
+
+void bpf_jit_free(struct bpf_prog *prog)
+{
+	if (prog->jited) {
+		struct rv_jit_data *jit_data = prog->aux->jit_data;
+		struct bpf_binary_header *hdr;
+
+		/*
+		 * If we fail the final pass of JIT (from jit_subprogs),
+		 * the program may not be finalized yet. Call finalize here
+		 * before freeing it.
+		 */
+		if (jit_data) {
+			bpf_jit_binary_pack_finalize(prog, jit_data->ro_header, jit_data->header);
+			kfree(jit_data);
+		}
+		hdr = bpf_jit_binary_pack_hdr(prog);
+		bpf_jit_binary_pack_free(hdr, NULL);
+		WARN_ON_ONCE(!bpf_prog_kallsyms_verify_off(prog));
+	}
+
+	bpf_prog_unlock_free(prog);
+}
diff --git a/kernel/bpf/core.c b/kernel/bpf/core.c
index 0f8f036d8bd11b..4e3ce0542e31f6 100644
--- a/kernel/bpf/core.c
+++ b/kernel/bpf/core.c
@@ -870,7 +870,7 @@ static struct bpf_prog_pack *alloc_new_pack(bpf_jit_fill_hole_t bpf_fill_ill_ins
 		       GFP_KERNEL);
 	if (!pack)
 		return NULL;
-	pack->ptr = module_alloc(BPF_PROG_PACK_SIZE);
+	pack->ptr = bpf_jit_alloc_exec(BPF_PROG_PACK_SIZE);
 	if (!pack->ptr) {
 		kfree(pack);
 		return NULL;
@@ -894,7 +894,7 @@ void *bpf_prog_pack_alloc(u32 size, bpf_jit_fill_hole_t bpf_fill_ill_insns)
 	mutex_lock(&pack_mutex);
 	if (size > BPF_PROG_PACK_SIZE) {
 		size = round_up(size, PAGE_SIZE);
-		ptr = module_alloc(size);
+		ptr = bpf_jit_alloc_exec(size);
 		if (ptr) {
 			bpf_fill_ill_insns(ptr, size);
 			set_vm_flush_reset_perms(ptr);
@@ -932,7 +932,7 @@ void bpf_prog_pack_free(struct bpf_binary_header *hdr)
 
 	mutex_lock(&pack_mutex);
 	if (hdr->size > BPF_PROG_PACK_SIZE) {
-		module_memfree(hdr);
+		bpf_jit_free_exec(hdr);
 		goto out;
 	}
 
@@ -956,7 +956,7 @@ void bpf_prog_pack_free(struct bpf_binary_header *hdr)
 	if (bitmap_find_next_zero_area(pack->bitmap, BPF_PROG_CHUNK_COUNT, 0,
 				       BPF_PROG_CHUNK_COUNT, 0) == 0) {
 		list_del(&pack->list);
-		module_memfree(pack->ptr);
+		bpf_jit_free_exec(pack->ptr);
 		kfree(pack);
 	}
 out: