diff options
| author | Tony Lindgren <tony@atomide.com> | 2016-11-16 13:21:25 -0600 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2016-11-17 16:25:39 +0100 |
| commit | 536d599d4a5104a8f1f771d3a8db97138b0c9ebb (patch) | |
| tree | a52a70404352ab129d3d45500d43e358eade533d | |
| parent | 2bff3916fda9145587c0312b6f5c43d82504980c (diff) | |
| download | linux-536d599d4a5104a8f1f771d3a8db97138b0c9ebb.tar.gz | |
usb: musb: Add missing pm_runtime_disable and drop 2430 PM timeout
We are missing pm_runtime_disable() in 2430 glue layer. Further,
we only need to enable PM runtime and disable it on exit. With
musb_core.c doing PM, the glue layer as a parent will always be
active when musb_core.c is active.
This fixes host enumeration issues with some devices as reported
by Ladislav Michl <ladis@linux-mips.org>.
And holding an RPM reference while deregistering the child would
lead to a crash in omap2430_runtime_suspend() which dereferences
the now freed child's driver data on put as pointed out by
Johan Hovold <johan@kernel.org>:
Unable to handle kernel paging request at virtual address 6b6b6f17
...
[<c05453d4>] (omap2430_runtime_suspend) from [<c0481410>]
(pm_generic_runtime_suspend+0x3c/0x48)
[<c0481410>] (pm_generic_runtime_suspend) from [<c0121028>]
(_od_runtime_suspend+0x1c/0x30)
[<c0121028>] (_od_runtime_suspend) from [<c04833b0>] (__rpm_callback+0x3c/0x70)
[<c04833b0>] (__rpm_callback) from [<c0483414>] (rpm_callback+0x30/0x90)
[<c0483414>] (rpm_callback) from [<c0483984>] (rpm_suspend+0x118/0x6b4)
[<c0483984>] (rpm_suspend) from [<c04840f4>] (rpm_idle+0x104/0x440)
[<c04840f4>] (rpm_idle) from [<c04844ac>] (__pm_runtime_idle+0x7c/0xb0)
[<c04844ac>] (__pm_runtime_idle) from [<c0545458>] (omap2430_remove+0x38/0x58)
[<c0545458>] (omap2430_remove) from [<c047b2bc>] (platform_drv_remove+0x34/0x4c)
Note that if changes are needed to the autosuspend timeout, it should
be done in musb_core.c.
Reported-by: Ladislav Michl <ladis@linux-mips.org>
Fixes: 87326e858448 ("usb: musb: Remove extra PM runtime calls from
2430 glue layer")
Tested-by: Ladislav Michl <ladis@linux-mips.org>
Reviewed-by: Johan Hovold <johan@kernel.org>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| -rw-r--r-- | drivers/usb/musb/omap2430.c | 10 |
1 files changed, 4 insertions, 6 deletions
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index cc1225485509cb..e8be8e39ab8fbd 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -513,17 +513,18 @@ static int omap2430_probe(struct platform_device *pdev) } pm_runtime_enable(glue->dev); - pm_runtime_use_autosuspend(glue->dev); - pm_runtime_set_autosuspend_delay(glue->dev, 100); ret = platform_device_add(musb); if (ret) { dev_err(&pdev->dev, "failed to register musb device\n"); - goto err2; + goto err3; } return 0; +err3: + pm_runtime_disable(glue->dev); + err2: platform_device_put(musb); @@ -535,10 +536,7 @@ static int omap2430_remove(struct platform_device *pdev) { struct omap2430_glue *glue = platform_get_drvdata(pdev); - pm_runtime_get_sync(glue->dev); platform_device_unregister(glue->musb); - pm_runtime_put_sync(glue->dev); - pm_runtime_dont_use_autosuspend(glue->dev); pm_runtime_disable(glue->dev); return 0; |