Merge tag 'dmaengine-4.9-rc1' of git://git.infradead.org/users/vkoul/slave-dma

Pull dmaengine updates from Vinod Koul:
 "This is bit large pile of code which bring in some nice additions:

   - Error reporting: we have added a new mechanism for users of
     dmaenegine to register a callback_result which tells them the
     result of the dma transaction. Right now only one user (ntb) is
     using it.

   - As we discussed on KS mailing list and pointed out NO_IRQ has no
     place in kernel, this also remove NO_IRQ from dmaengine subsystem
     (both arm and ppc users)

   - Support for IOMMU slave transfers and its implementation for arm.

   - To get better build coverage, enable COMPILE_TEST for bunch of
     driver, and fix the warning and sparse complaints on these.

   - Apart from above, usual updates spread across drivers"

* tag 'dmaengine-4.9-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (169 commits)
  async_pq_val: fix DMA memory leak
  dmaengine: virt-dma: move function declarations
  dmaengine: omap-dma: Enable burst and data pack for SG
  DT: dmaengine: rcar-dmac: document R8A7743/5 support
  dmaengine: fsldma: Unmap region obtained by of_iomap
  dmaengine: jz4780: fix resource leaks on error exit return
  dma-debug: fix ia64 build, use PHYS_PFN
  dmaengine: coh901318: fix integer overflow when shifting more than 32 places
  dmaengine: edma: avoid uninitialized variable use
  dma-mapping: fix m32r build warning
  dma-mapping: fix ia64 build, use PHYS_PFN
  dmaengine: ti-dma-crossbar: enable COMPILE_TEST
  dmaengine: omap-dma: enable COMPILE_TEST
  dmaengine: edma: enable COMPILE_TEST
  dmaengine: ti-dma-crossbar: Fix of_device_id data parameter usage
  dmaengine: ti-dma-crossbar: Correct type for of_find_property() third parameter
  dmaengine/ARM: omap-dma: Fix the DMAengine compile test on non OMAP configs
  dmaengine: edma: Rename set_bits and remove unused clear_bits helper
  dmaengine: edma: Use correct type for of_find_property() third parameter
  dmaengine: edma: Fix of_device_id data parameter usage (legacy vs TPCC)
  ...

5 files changed, 33 insertions, 6 deletions

diff --git a/Documentation/DMA-API.txt b/Documentation/DMA-API.txt
index 1d26eeb6b5f625..6b20128fab8a2b 100644
--- a/Documentation/DMA-API.txt
+++ b/Documentation/DMA-API.txt
@@ -277,14 +277,26 @@ and <size> parameters are provided to do partial page mapping, it is
 recommended that you never use these unless you really know what the
 cache width is.
 
+dma_addr_t
+dma_map_resource(struct device *dev, phys_addr_t phys_addr, size_t size,
+		 enum dma_data_direction dir, unsigned long attrs)
+
+void
+dma_unmap_resource(struct device *dev, dma_addr_t addr, size_t size,
+		   enum dma_data_direction dir, unsigned long attrs)
+
+API for mapping and unmapping for MMIO resources. All the notes and
+warnings for the other mapping APIs apply here. The API should only be
+used to map device MMIO resources, mapping of RAM is not permitted.
+
 int
 dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 
-In some circumstances dma_map_single() and dma_map_page() will fail to create
-a mapping. A driver can check for these errors by testing the returned
-DMA address with dma_mapping_error(). A non-zero return value means the mapping
-could not be created and the driver should take appropriate action (e.g.
-reduce current DMA mapping usage or delay and try again later).
+In some circumstances dma_map_single(), dma_map_page() and dma_map_resource()
+will fail to create a mapping. A driver can check for these errors by testing
+the returned DMA address with dma_mapping_error(). A non-zero return value
+means the mapping could not be created and the driver should take appropriate
+action (e.g. reduce current DMA mapping usage or delay and try again later).
 
 	int
 	dma_map_sg(struct device *dev, struct scatterlist *sg,
diff --git a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
index 175f0e44ed85fc..3c9a57a8443b25 100644
--- a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
+++ b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
@@ -8,6 +8,7 @@ Required properties:
       "fsl,imx51-sdma"
       "fsl,imx53-sdma"
       "fsl,imx6q-sdma"
+      "fsl,imx7d-sdma"
   The -to variants should be preferred since they allow to determine the
   correct ROM script addresses needed for the driver to work without additional
   firmware.
diff --git a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt
index 5b902ac8d97e92..5f2ce669789abe 100644
--- a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt
+++ b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt
@@ -1,4 +1,4 @@
-* Renesas R-Car DMA Controller Device Tree bindings
+* Renesas R-Car (RZ/G) DMA Controller Device Tree bindings
 
 Renesas R-Car Generation 2 SoCs have multiple multi-channel DMA
 controller instances named DMAC capable of serving multiple clients. Channels
@@ -16,6 +16,8 @@ Required Properties:
 
 - compatible: "renesas,dmac-<soctype>", "renesas,rcar-dmac" as fallback.
 	      Examples with soctypes are:
+		- "renesas,dmac-r8a7743" (RZ/G1M)
+		- "renesas,dmac-r8a7745" (RZ/G1E)
 		- "renesas,dmac-r8a7790" (R-Car H2)
 		- "renesas,dmac-r8a7791" (R-Car M2-W)
 		- "renesas,dmac-r8a7792" (R-Car V2H)
diff --git a/Documentation/devicetree/bindings/dma/sun6i-dma.txt b/Documentation/devicetree/bindings/dma/sun6i-dma.txt
index d13c136cef8c43..6b267045f5221c 100644
--- a/Documentation/devicetree/bindings/dma/sun6i-dma.txt
+++ b/Documentation/devicetree/bindings/dma/sun6i-dma.txt
@@ -7,6 +7,7 @@ Required properties:
 - compatible:	Must be one of
 		  "allwinner,sun6i-a31-dma"
 		  "allwinner,sun8i-a23-dma"
+		  "allwinner,sun8i-a83t-dma"
 		  "allwinner,sun8i-h3-dma"
 - reg:		Should contain the registers base address and length
 - interrupts:	Should contain a reference to the interrupt used by this device
diff --git a/Documentation/dmaengine/provider.txt b/Documentation/dmaengine/provider.txt
index 91ce82d5f0c4f6..c4fd47540b318c 100644
--- a/Documentation/dmaengine/provider.txt
+++ b/Documentation/dmaengine/provider.txt
@@ -282,6 +282,17 @@ supported.
 			that is supposed to push the current
 			transaction descriptor to a pending queue, waiting
 			for issue_pending to be called.
+     - In this structure the function pointer callback_result can be
+       initialized in order for the submitter to be notified that a
+       transaction has completed. In the earlier code the function pointer
+       callback has been used. However it does not provide any status to the
+       transaction and will be deprecated. The result structure defined as
+       dmaengine_result that is passed in to callback_result has two fields:
+       + result: This provides the transfer result defined by
+		 dmaengine_tx_result. Either success or some error
+		 condition.
+       + residue: Provides the residue bytes of the transfer for those that
+		  support residue.
 
    * device_issue_pending
      - Takes the first transaction descriptor in the pending queue,