diff options
Diffstat (limited to 'arch/alpha/kernel/sys_sio.c')
| -rw-r--r-- | arch/alpha/kernel/sys_sio.c | 486 |
1 files changed, 0 insertions, 486 deletions
diff --git a/arch/alpha/kernel/sys_sio.c b/arch/alpha/kernel/sys_sio.c deleted file mode 100644 index 086488ed83a7f4..00000000000000 --- a/arch/alpha/kernel/sys_sio.c +++ /dev/null @@ -1,486 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * linux/arch/alpha/kernel/sys_sio.c - * - * Copyright (C) 1995 David A Rusling - * Copyright (C) 1996 Jay A Estabrook - * Copyright (C) 1998, 1999 Richard Henderson - * - * Code for all boards that route the PCI interrupts through the SIO - * PCI/ISA bridge. This includes Noname (AXPpci33), Multia (UDB), - * Kenetics's Platform 2000, Avanti (AlphaStation), XL, and AlphaBook1. - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/mm.h> -#include <linux/sched.h> -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/screen_info.h> - -#include <asm/compiler.h> -#include <asm/ptrace.h> -#include <asm/dma.h> -#include <asm/irq.h> -#include <asm/mmu_context.h> -#include <asm/io.h> -#include <asm/core_apecs.h> -#include <asm/core_lca.h> -#include <asm/tlbflush.h> - -#include "proto.h" -#include "irq_impl.h" -#include "pci_impl.h" -#include "machvec_impl.h" -#include "pc873xx.h" - -#if defined(ALPHA_RESTORE_SRM_SETUP) -/* Save LCA configuration data as the console had it set up. */ -struct -{ - unsigned int orig_route_tab; /* for SAVE/RESTORE */ -} saved_config __attribute((common)); -#endif - - -static void __init -sio_init_irq(void) -{ - if (alpha_using_srm) - alpha_mv.device_interrupt = srm_device_interrupt; - - init_i8259a_irqs(); - common_init_isa_dma(); -} - -static inline void __init -alphabook1_init_arch(void) -{ -#ifdef CONFIG_VGA_CONSOLE - /* The AlphaBook1 has LCD video fixed at 800x600, - 37 rows and 100 cols. */ - vgacon_screen_info.orig_y = 37; - vgacon_screen_info.orig_video_cols = 100; - vgacon_screen_info.orig_video_lines = 37; -#endif - - lca_init_arch(); -} - - -/* - * sio_route_tab selects irq routing in PCI/ISA bridge so that: - * PIRQ0 -> irq 15 - * PIRQ1 -> irq 9 - * PIRQ2 -> irq 10 - * PIRQ3 -> irq 11 - * - * This probably ought to be configurable via MILO. For - * example, sound boards seem to like using IRQ 9. - * - * This is NOT how we should do it. PIRQ0-X should have - * their own IRQs, the way intel uses the IO-APIC IRQs. - */ - -static void __init -sio_pci_route(void) -{ - unsigned int orig_route_tab; - - /* First, ALWAYS read and print the original setting. */ - pci_bus_read_config_dword(pci_isa_hose->bus, PCI_DEVFN(7, 0), 0x60, - &orig_route_tab); - printk("%s: PIRQ original 0x%x new 0x%x\n", __func__, - orig_route_tab, alpha_mv.sys.sio.route_tab); - -#if defined(ALPHA_RESTORE_SRM_SETUP) - saved_config.orig_route_tab = orig_route_tab; -#endif - - /* Now override with desired setting. */ - pci_bus_write_config_dword(pci_isa_hose->bus, PCI_DEVFN(7, 0), 0x60, - alpha_mv.sys.sio.route_tab); -} - -static bool sio_pci_dev_irq_needs_level(const struct pci_dev *dev) -{ - if ((dev->class >> 16 == PCI_BASE_CLASS_BRIDGE) && - (dev->class >> 8 != PCI_CLASS_BRIDGE_PCMCIA)) - return false; - - return true; -} - -static unsigned int __init -sio_collect_irq_levels(void) -{ - unsigned int level_bits = 0; - struct pci_dev *dev = NULL; - - /* Iterate through the devices, collecting IRQ levels. */ - for_each_pci_dev(dev) { - if (!sio_pci_dev_irq_needs_level(dev)) - continue; - - if (dev->irq) - level_bits |= (1 << dev->irq); - } - return level_bits; -} - -static void __sio_fixup_irq_levels(unsigned int level_bits, bool reset) -{ - unsigned int old_level_bits; - - /* - * Now, make all PCI interrupts level sensitive. Notice: - * these registers must be accessed byte-wise. inw()/outw() - * don't work. - * - * Make sure to turn off any level bits set for IRQs 9,10,11,15, - * so that the only bits getting set are for devices actually found. - * Note that we do preserve the remainder of the bits, which we hope - * will be set correctly by ARC/SRM. - * - * Note: we at least preserve any level-set bits on AlphaBook1 - */ - old_level_bits = inb(0x4d0) | (inb(0x4d1) << 8); - - if (reset) - old_level_bits &= 0x71ff; - - level_bits |= old_level_bits; - - outb((level_bits >> 0) & 0xff, 0x4d0); - outb((level_bits >> 8) & 0xff, 0x4d1); -} - -static inline void -sio_fixup_irq_levels(unsigned int level_bits) -{ - __sio_fixup_irq_levels(level_bits, true); -} - -static inline int -noname_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - /* - * The Noname board has 5 PCI slots with each of the 4 - * interrupt pins routed to different pins on the PCI/ISA - * bridge (PIRQ0-PIRQ3). The table below is based on - * information available at: - * - * http://ftp.digital.com/pub/DEC/axppci/ref_interrupts.txt - * - * I have no information on the Avanti interrupt routing, but - * the routing seems to be identical to the Noname except - * that the Avanti has an additional slot whose routing I'm - * unsure of. - * - * pirq_tab[0] is a fake entry to deal with old PCI boards - * that have the interrupt pin number hardwired to 0 (meaning - * that they use the default INTA line, if they are interrupt - * driven at all). - */ - static char irq_tab[][5] = { - /*INT A B C D */ - { 3, 3, 3, 3, 3}, /* idsel 6 (53c810) */ - {-1, -1, -1, -1, -1}, /* idsel 7 (SIO: PCI/ISA bridge) */ - { 2, 2, -1, -1, -1}, /* idsel 8 (Hack: slot closest ISA) */ - {-1, -1, -1, -1, -1}, /* idsel 9 (unused) */ - {-1, -1, -1, -1, -1}, /* idsel 10 (unused) */ - { 0, 0, 2, 1, 0}, /* idsel 11 KN25_PCI_SLOT0 */ - { 1, 1, 0, 2, 1}, /* idsel 12 KN25_PCI_SLOT1 */ - { 2, 2, 1, 0, 2}, /* idsel 13 KN25_PCI_SLOT2 */ - { 0, 0, 0, 0, 0}, /* idsel 14 AS255 TULIP */ - }; - const long min_idsel = 6, max_idsel = 14, irqs_per_slot = 5; - int irq = COMMON_TABLE_LOOKUP, tmp; - tmp = __kernel_extbl(alpha_mv.sys.sio.route_tab, irq); - - irq = irq >= 0 ? tmp : -1; - - /* Fixup IRQ level if an actual IRQ mapping is detected */ - if (sio_pci_dev_irq_needs_level(dev) && irq >= 0) - __sio_fixup_irq_levels(1 << irq, false); - - return irq; -} - -static inline int -p2k_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - static char irq_tab[][5] = { - /*INT A B C D */ - { 0, 0, -1, -1, -1}, /* idsel 6 (53c810) */ - {-1, -1, -1, -1, -1}, /* idsel 7 (SIO: PCI/ISA bridge) */ - { 1, 1, 2, 3, 0}, /* idsel 8 (slot A) */ - { 2, 2, 3, 0, 1}, /* idsel 9 (slot B) */ - {-1, -1, -1, -1, -1}, /* idsel 10 (unused) */ - {-1, -1, -1, -1, -1}, /* idsel 11 (unused) */ - { 3, 3, -1, -1, -1}, /* idsel 12 (CMD0646) */ - }; - const long min_idsel = 6, max_idsel = 12, irqs_per_slot = 5; - int irq = COMMON_TABLE_LOOKUP, tmp; - tmp = __kernel_extbl(alpha_mv.sys.sio.route_tab, irq); - return irq >= 0 ? tmp : -1; -} - -static inline void __init -noname_init_pci(void) -{ - common_init_pci(); - sio_pci_route(); - sio_fixup_irq_levels(sio_collect_irq_levels()); - - if (pc873xx_probe() == -1) { - printk(KERN_ERR "Probing for PC873xx Super IO chip failed.\n"); - } else { - printk(KERN_INFO "Found %s Super IO chip at 0x%x\n", - pc873xx_get_model(), pc873xx_get_base()); - - /* Enabling things in the Super IO chip doesn't actually - * configure and enable things, the legacy drivers still - * need to do the actual configuration and enabling. - * This only unblocks them. - */ - -#if !defined(CONFIG_ALPHA_AVANTI) - /* Don't bother on the Avanti family. - * None of them had on-board IDE. - */ - pc873xx_enable_ide(); -#endif - pc873xx_enable_epp19(); - } -} - -static inline void __init -alphabook1_init_pci(void) -{ - struct pci_dev *dev; - unsigned char orig, config; - - common_init_pci(); - sio_pci_route(); - - /* - * On the AlphaBook1, the PCMCIA chip (Cirrus 6729) - * is sensitive to PCI bus bursts, so we must DISABLE - * burst mode for the NCR 8xx SCSI... :-( - * - * Note that the NCR810 SCSI driver must preserve the - * setting of the bit in order for this to work. At the - * moment (2.0.29), ncr53c8xx.c does NOT do this, but - * 53c7,8xx.c DOES. - */ - - dev = NULL; - while ((dev = pci_get_device(PCI_VENDOR_ID_NCR, PCI_ANY_ID, dev))) { - if (dev->device == PCI_DEVICE_ID_NCR_53C810 - || dev->device == PCI_DEVICE_ID_NCR_53C815 - || dev->device == PCI_DEVICE_ID_NCR_53C820 - || dev->device == PCI_DEVICE_ID_NCR_53C825) { - unsigned long io_port; - unsigned char ctest4; - - io_port = dev->resource[0].start; - ctest4 = inb(io_port+0x21); - if (!(ctest4 & 0x80)) { - printk("AlphaBook1 NCR init: setting" - " burst disable\n"); - outb(ctest4 | 0x80, io_port+0x21); - } - } - } - - /* Do not set *ANY* level triggers for AlphaBook1. */ - sio_fixup_irq_levels(0); - - /* Make sure that register PR1 indicates 1Mb mem */ - outb(0x0f, 0x3ce); orig = inb(0x3cf); /* read PR5 */ - outb(0x0f, 0x3ce); outb(0x05, 0x3cf); /* unlock PR0-4 */ - outb(0x0b, 0x3ce); config = inb(0x3cf); /* read PR1 */ - if ((config & 0xc0) != 0xc0) { - printk("AlphaBook1 VGA init: setting 1Mb memory\n"); - config |= 0xc0; - outb(0x0b, 0x3ce); outb(config, 0x3cf); /* write PR1 */ - } - outb(0x0f, 0x3ce); outb(orig, 0x3cf); /* (re)lock PR0-4 */ -} - -void -sio_kill_arch(int mode) -{ -#if defined(ALPHA_RESTORE_SRM_SETUP) - /* Since we cannot read the PCI DMA Window CSRs, we - * cannot restore them here. - * - * However, we CAN read the PIRQ route register, so restore it - * now... - */ - pci_bus_write_config_dword(pci_isa_hose->bus, PCI_DEVFN(7, 0), 0x60, - saved_config.orig_route_tab); -#endif -} - - -/* - * The System Vectors - */ - -#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_BOOK1) -struct alpha_machine_vector alphabook1_mv __initmv = { - .vector_name = "AlphaBook1", - DO_EV4_MMU, - DO_DEFAULT_RTC, - DO_LCA_IO, - .machine_check = lca_machine_check, - .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS, - .min_io_address = DEFAULT_IO_BASE, - .min_mem_address = APECS_AND_LCA_DEFAULT_MEM_BASE, - - .nr_irqs = 16, - .device_interrupt = isa_device_interrupt, - - .init_arch = alphabook1_init_arch, - .init_irq = sio_init_irq, - .init_rtc = common_init_rtc, - .init_pci = alphabook1_init_pci, - .kill_arch = sio_kill_arch, - .pci_map_irq = noname_map_irq, - .pci_swizzle = common_swizzle, - - .sys = { .sio = { - /* NCR810 SCSI is 14, PCMCIA controller is 15. */ - .route_tab = 0x0e0f0a0a, - }} -}; -ALIAS_MV(alphabook1) -#endif - -#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_AVANTI) -struct alpha_machine_vector avanti_mv __initmv = { - .vector_name = "Avanti", - DO_EV4_MMU, - DO_DEFAULT_RTC, - DO_APECS_IO, - .machine_check = apecs_machine_check, - .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS, - .min_io_address = DEFAULT_IO_BASE, - .min_mem_address = APECS_AND_LCA_DEFAULT_MEM_BASE, - - .nr_irqs = 16, - .device_interrupt = isa_device_interrupt, - - .init_arch = apecs_init_arch, - .init_irq = sio_init_irq, - .init_rtc = common_init_rtc, - .init_pci = noname_init_pci, - .kill_arch = sio_kill_arch, - .pci_map_irq = noname_map_irq, - .pci_swizzle = common_swizzle, - - .sys = { .sio = { - .route_tab = 0x0b0a050f, /* leave 14 for IDE, 9 for SND */ - }} -}; -ALIAS_MV(avanti) -#endif - -#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_NONAME) -struct alpha_machine_vector noname_mv __initmv = { - .vector_name = "Noname", - DO_EV4_MMU, - DO_DEFAULT_RTC, - DO_LCA_IO, - .machine_check = lca_machine_check, - .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS, - .min_io_address = DEFAULT_IO_BASE, - .min_mem_address = APECS_AND_LCA_DEFAULT_MEM_BASE, - - .nr_irqs = 16, - .device_interrupt = srm_device_interrupt, - - .init_arch = lca_init_arch, - .init_irq = sio_init_irq, - .init_rtc = common_init_rtc, - .init_pci = noname_init_pci, - .kill_arch = sio_kill_arch, - .pci_map_irq = noname_map_irq, - .pci_swizzle = common_swizzle, - - .sys = { .sio = { - /* For UDB, the only available PCI slot must not map to IRQ 9, - since that's the builtin MSS sound chip. That PCI slot - will map to PIRQ1 (for INTA at least), so we give it IRQ 15 - instead. - - Unfortunately we have to do this for NONAME as well, since - they are co-indicated when the platform type "Noname" is - selected... :-( */ - - .route_tab = 0x0b0a0f0d, - }} -}; -ALIAS_MV(noname) -#endif - -#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_P2K) -struct alpha_machine_vector p2k_mv __initmv = { - .vector_name = "Platform2000", - DO_EV4_MMU, - DO_DEFAULT_RTC, - DO_LCA_IO, - .machine_check = lca_machine_check, - .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS, - .min_io_address = DEFAULT_IO_BASE, - .min_mem_address = APECS_AND_LCA_DEFAULT_MEM_BASE, - - .nr_irqs = 16, - .device_interrupt = srm_device_interrupt, - - .init_arch = lca_init_arch, - .init_irq = sio_init_irq, - .init_rtc = common_init_rtc, - .init_pci = noname_init_pci, - .kill_arch = sio_kill_arch, - .pci_map_irq = p2k_map_irq, - .pci_swizzle = common_swizzle, - - .sys = { .sio = { - .route_tab = 0x0b0a090f, - }} -}; -ALIAS_MV(p2k) -#endif - -#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_XL) -struct alpha_machine_vector xl_mv __initmv = { - .vector_name = "XL", - DO_EV4_MMU, - DO_DEFAULT_RTC, - DO_APECS_IO, - .machine_check = apecs_machine_check, - .max_isa_dma_address = ALPHA_XL_MAX_ISA_DMA_ADDRESS, - .min_io_address = DEFAULT_IO_BASE, - .min_mem_address = XL_DEFAULT_MEM_BASE, - - .nr_irqs = 16, - .device_interrupt = isa_device_interrupt, - - .init_arch = apecs_init_arch, - .init_irq = sio_init_irq, - .init_rtc = common_init_rtc, - .init_pci = noname_init_pci, - .kill_arch = sio_kill_arch, - .pci_map_irq = noname_map_irq, - .pci_swizzle = common_swizzle, - - .sys = { .sio = { - .route_tab = 0x0b0a090f, - }} -}; -ALIAS_MV(xl) -#endif |