diff options
Diffstat (limited to 'arch/alpha/kernel/sys_jensen.c')
| -rw-r--r-- | arch/alpha/kernel/sys_jensen.c | 237 |
1 files changed, 0 insertions, 237 deletions
diff --git a/arch/alpha/kernel/sys_jensen.c b/arch/alpha/kernel/sys_jensen.c deleted file mode 100644 index 5c9c8842812444..00000000000000 --- a/arch/alpha/kernel/sys_jensen.c +++ /dev/null @@ -1,237 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * linux/arch/alpha/kernel/sys_jensen.c - * - * Copyright (C) 1995 Linus Torvalds - * Copyright (C) 1998, 1999 Richard Henderson - * - * Code supporting the Jensen. - */ -#define __EXTERN_INLINE -#include <asm/io.h> -#include <asm/jensen.h> -#undef __EXTERN_INLINE - -#include <linux/interrupt.h> -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/mm.h> -#include <linux/sched.h> -#include <linux/pci.h> -#include <linux/init.h> - -#include <asm/ptrace.h> - -#include <asm/dma.h> -#include <asm/irq.h> -#include <asm/mmu_context.h> -#include <asm/tlbflush.h> - -#include "proto.h" -#include "irq_impl.h" -#include "pci_impl.h" -#include "machvec_impl.h" - - -/* - * Jensen is special: the vector is 0x8X0 for EISA interrupt X, and - * 0x9X0 for the local motherboard interrupts. - * - * Note especially that those local interrupts CANNOT be masked, - * which causes much of the pain below... - * - * 0x660 - NMI - * - * 0x800 - IRQ0 interval timer (not used, as we use the RTC timer) - * 0x810 - IRQ1 line printer (duh..) - * 0x860 - IRQ6 floppy disk - * - * 0x900 - COM1 - * 0x920 - COM2 - * 0x980 - keyboard - * 0x990 - mouse - * - * PCI-based systems are more sane: they don't have the local - * interrupts at all, and have only normal PCI interrupts from - * devices. Happily it's easy enough to do a sane mapping from the - * Jensen. - * - * Note that this means that we may have to do a hardware - * "local_op" to a different interrupt than we report to the rest of the - * world. - */ - -static void -jensen_local_enable(struct irq_data *d) -{ - /* the parport is really hw IRQ 1, silly Jensen. */ - if (d->irq == 7) - i8259a_enable_irq(d); -} - -static void -jensen_local_disable(struct irq_data *d) -{ - /* the parport is really hw IRQ 1, silly Jensen. */ - if (d->irq == 7) - i8259a_disable_irq(d); -} - -static void -jensen_local_mask_ack(struct irq_data *d) -{ - /* the parport is really hw IRQ 1, silly Jensen. */ - if (d->irq == 7) - i8259a_mask_and_ack_irq(d); -} - -static struct irq_chip jensen_local_irq_type = { - .name = "LOCAL", - .irq_unmask = jensen_local_enable, - .irq_mask = jensen_local_disable, - .irq_mask_ack = jensen_local_mask_ack, -}; - -static void -jensen_device_interrupt(unsigned long vector) -{ - int irq; - - switch (vector) { - case 0x660: - printk("Whee.. NMI received. Probable hardware error\n"); - printk("61=%02x, 461=%02x\n", inb(0x61), inb(0x461)); - return; - - /* local device interrupts: */ - case 0x900: irq = 4; break; /* com1 -> irq 4 */ - case 0x920: irq = 3; break; /* com2 -> irq 3 */ - case 0x980: irq = 1; break; /* kbd -> irq 1 */ - case 0x990: irq = 9; break; /* mouse -> irq 9 */ - - default: - if (vector > 0x900) { - printk("Unknown local interrupt %lx\n", vector); - return; - } - - irq = (vector - 0x800) >> 4; - if (irq == 1) - irq = 7; - break; - } - - /* If there is no handler yet... */ - if (!irq_has_action(irq)) { - /* If it is a local interrupt that cannot be masked... */ - if (vector >= 0x900) - { - /* Clear keyboard/mouse state */ - inb(0x64); - inb(0x60); - /* Reset serial ports */ - inb(0x3fa); - inb(0x2fa); - outb(0x0c, 0x3fc); - outb(0x0c, 0x2fc); - /* Clear NMI */ - outb(0,0x61); - outb(0,0x461); - } - } - -#if 0 - /* A useful bit of code to find out if an interrupt is going wild. */ - { - static unsigned int last_msg = 0, last_cc = 0; - static int last_irq = -1, count = 0; - unsigned int cc; - - __asm __volatile("rpcc %0" : "=r"(cc)); - ++count; -#define JENSEN_CYCLES_PER_SEC (150000000) - if (cc - last_msg > ((JENSEN_CYCLES_PER_SEC) * 3) || - irq != last_irq) { - printk(KERN_CRIT " irq %d count %d cc %u @ %lx\n", - irq, count, cc-last_cc, get_irq_regs()->pc); - count = 0; - last_msg = cc; - last_irq = irq; - } - last_cc = cc; - } -#endif - - handle_irq(irq); -} - -static void __init -jensen_init_irq(void) -{ - init_i8259a_irqs(); - - irq_set_chip_and_handler(1, &jensen_local_irq_type, handle_level_irq); - irq_set_chip_and_handler(4, &jensen_local_irq_type, handle_level_irq); - irq_set_chip_and_handler(3, &jensen_local_irq_type, handle_level_irq); - irq_set_chip_and_handler(7, &jensen_local_irq_type, handle_level_irq); - irq_set_chip_and_handler(9, &jensen_local_irq_type, handle_level_irq); - - common_init_isa_dma(); -} - -static void __init -jensen_init_arch(void) -{ - struct pci_controller *hose; -#ifdef CONFIG_PCI - static struct pci_dev fake_isa_bridge = { .dma_mask = 0xffffffffUL, }; - - isa_bridge = &fake_isa_bridge; -#endif - - /* Create a hose so that we can report i/o base addresses to - userland. */ - - pci_isa_hose = hose = alloc_pci_controller(); - hose->io_space = &ioport_resource; - hose->mem_space = &iomem_resource; - hose->index = 0; - - hose->sparse_mem_base = EISA_MEM - IDENT_ADDR; - hose->dense_mem_base = 0; - hose->sparse_io_base = EISA_IO - IDENT_ADDR; - hose->dense_io_base = 0; - - hose->sg_isa = hose->sg_pci = NULL; - __direct_map_base = 0; - __direct_map_size = 0xffffffff; -} - -static void -jensen_machine_check(unsigned long vector, unsigned long la) -{ - printk(KERN_CRIT "Machine check\n"); -} - -/* - * The System Vector - */ - -struct alpha_machine_vector jensen_mv __initmv = { - .vector_name = "Jensen", - DO_EV4_MMU, - IO_LITE(JENSEN,jensen), - .machine_check = jensen_machine_check, - .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS, - .rtc_port = 0x170, - - .nr_irqs = 16, - .device_interrupt = jensen_device_interrupt, - - .init_arch = jensen_init_arch, - .init_irq = jensen_init_irq, - .init_rtc = common_init_rtc, - .init_pci = NULL, - .kill_arch = NULL, -}; -ALIAS_MV(jensen) |