diff options
Diffstat (limited to 'arch/alpha/Kconfig')
| -rw-r--r-- | arch/alpha/Kconfig | 175 |
1 files changed, 9 insertions, 166 deletions
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig index 3afd042150f8af..50ff06d5b799c9 100644 --- a/arch/alpha/Kconfig +++ b/arch/alpha/Kconfig @@ -10,7 +10,7 @@ config ALPHA select ARCH_NO_SG_CHAIN select ARCH_USE_CMPXCHG_LOCKREF select DMA_OPS if PCI - select FORCE_PCI if !ALPHA_JENSEN + select FORCE_PCI select PCI_DOMAINS if PCI select PCI_SYSCALL if PCI select HAVE_ASM_MODVERSIONS @@ -90,22 +90,11 @@ choice <http://www.alphalinux.org/>. In summary: Alcor/Alpha-XLT AS 600, AS 500, XL-300, XL-366 - Alpha-XL XL-233, XL-266 - AlphaBook1 Alpha laptop - Avanti AS 200, AS 205, AS 250, AS 255, AS 300, AS 400 - Cabriolet AlphaPC64, AlphaPCI64 DP264 DP264 / DS20 / ES40 / DS10 / DS10L - EB164 EB164 21164 evaluation board - EB64+ EB64+ 21064 evaluation board - EB66 EB66 21066 evaluation board - EB66+ EB66+ 21066 evaluation board - Jensen DECpc 150, DEC 2000 models 300, 500 LX164 AlphaPC164-LX - Lynx AS 2100A Miata Personal Workstation 433/500/600 a/au Marvel AlphaServer ES47 / ES80 / GS1280 Mikasa AS 1000 - Noname AXPpci33, UDB (Multia) Noritake AS 1000A, AS 600A, AS 800 PC164 AlphaPC164 Rawhide AS 1200, AS 4000, AS 4100 @@ -137,27 +126,6 @@ config ALPHA_ALCOR all the work required to support an external Bcache and to maintain memory coherence when a PCI device DMAs into (or out of) memory. -config ALPHA_XL - bool "Alpha-XL" - help - XL-233 and XL-266-based Alpha systems. - -config ALPHA_BOOK1 - bool "AlphaBook1" - help - Dec AlphaBook1/Burns Alpha-based laptops. - -config ALPHA_AVANTI_CH - bool "Avanti" - -config ALPHA_CABRIOLET - bool "Cabriolet" - help - Cabriolet AlphaPC64, AlphaPCI64 systems. Derived from EB64+ but now - baby-AT with Flash boot ROM, no on-board SCSI or Ethernet. 3 ISA - slots, 4 PCI slots (one pair are on a shared slot), uses plug-in - Bcache SIMMs. Requires power supply with 3.3V output. - config ALPHA_DP264 bool "DP264" help @@ -165,62 +133,18 @@ config ALPHA_DP264 API Networks: 264DP, UP2000(+), CS20; Compaq: DS10(E,L), XP900, XP1000, DS20(E), ES40. -config ALPHA_EB164 - bool "EB164" - help - EB164 21164 evaluation board from DEC. Uses 21164 and ALCOR. Has - ISA and PCI expansion (3 ISA slots, 2 64-bit PCI slots (one is - shared with an ISA slot) and 2 32-bit PCI slots. Uses plus-in - Bcache SIMMs. I/O sub-system provides SuperI/O (2S, 1P, FD), KBD, - MOUSE (PS2 style), RTC/NVRAM. Boot ROM is Flash. PC-AT-sized - motherboard. Requires power supply with 3.3V output. - -config ALPHA_EB64P_CH - bool "EB64+" - -config ALPHA_EB66 - bool "EB66" - help - A Digital DS group board. Uses 21066 or 21066A. I/O sub-system is - identical to EB64+. Baby PC-AT size. Runs from standard PC power - supply. The EB66 schematic was published as a marketing poster - advertising the 21066 as "the first microprocessor in the world with - embedded PCI". - -config ALPHA_EB66P - bool "EB66+" - help - Later variant of the EB66 board. - config ALPHA_EIGER bool "Eiger" help Apparently an obscure OEM single-board computer based on the Typhoon/Tsunami chipset family. Information on it is scanty. -config ALPHA_JENSEN - bool "Jensen" - select HAVE_EISA - help - DEC PC 150 AXP (aka Jensen): This is a very old Digital system - one - of the first-generation Alpha systems. A number of these systems - seem to be available on the second- hand market. The Jensen is a - floor-standing tower system which originally used a 150MHz 21064 It - used programmable logic to interface a 486 EISA I/O bridge to the - CPU. - config ALPHA_LX164 bool "LX164" help A technical overview of this board is available at <http://www.unix-ag.org/Linux-Alpha/Architectures/LX164.html>. -config ALPHA_LYNX - bool "Lynx" - select HAVE_EISA - help - AlphaServer 2100A-based systems. - config ALPHA_MARVEL bool "Marvel" help @@ -243,9 +167,6 @@ config ALPHA_NAUTILUS help Alpha systems based on the AMD 751 & ALI 1543C chipsets. -config ALPHA_NONAME_CH - bool "Noname" - config ALPHA_NORITAKE bool "Noritake" select HAVE_EISA @@ -256,9 +177,6 @@ config ALPHA_NORITAKE config ALPHA_PC164 bool "PC164" -config ALPHA_P2K - bool "Platform2000" - config ALPHA_RAWHIDE bool "Rawhide" select HAVE_EISA @@ -322,84 +240,18 @@ config ISA_DMA_API bool default y -config ALPHA_NONAME - bool - depends on ALPHA_BOOK1 || ALPHA_NONAME_CH - default y - help - The AXPpci33 (aka NoName), is based on the EB66 (includes the Multia - UDB). This design was produced by Digital's Technical OEM (TOEM) - group. It uses the 21066 processor running at 166MHz or 233MHz. It - is a baby-AT size, and runs from a standard PC power supply. It has - 5 ISA slots and 3 PCI slots (one pair are a shared slot). There are - 2 versions, with either PS/2 or large DIN connectors for the - keyboard. - -config ALPHA_EV4 - bool - depends on ALPHA_JENSEN || (ALPHA_SABLE && !ALPHA_GAMMA) || ALPHA_LYNX || ALPHA_NORITAKE && !ALPHA_PRIMO || ALPHA_MIKASA && !ALPHA_PRIMO || ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P_CH || ALPHA_XL || ALPHA_NONAME || ALPHA_EB66 || ALPHA_EB66P || ALPHA_P2K - default y if !ALPHA_LYNX - default y if !ALPHA_EV5 - -config ALPHA_LCA - bool - depends on ALPHA_NONAME || ALPHA_EB66 || ALPHA_EB66P || ALPHA_P2K - default y - -config ALPHA_APECS - bool - depends on !ALPHA_PRIMO && (ALPHA_NORITAKE || ALPHA_MIKASA) || ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P_CH || ALPHA_XL - default y - -config ALPHA_EB64P - bool - depends on ALPHA_CABRIOLET || ALPHA_EB64P_CH - default y - help - Uses 21064 or 21064A and APECs. Has ISA and PCI expansion (3 ISA, - 2 PCI, one pair are on a shared slot). Supports 36-bit DRAM SIMs. - ISA bus generated by Intel SaturnI/O PCI-ISA bridge. On-board SCSI - (NCR 810 on PCI) Ethernet (Digital 21040), KBD, MOUSE (PS2 style), - SuperI/O (2S, 1P, FD), RTC/NVRAM. Boot ROM is EPROM. PC-AT size. - Runs from standard PC power supply. - -config ALPHA_EV5 - bool "EV5 CPU(s) (model 5/xxx)?" if ALPHA_LYNX - default y if ALPHA_RX164 || ALPHA_RAWHIDE || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_SABLE && ALPHA_GAMMA || ALPHA_NORITAKE && ALPHA_PRIMO || ALPHA_MIKASA && ALPHA_PRIMO || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR - config ALPHA_CIA bool - depends on ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_NORITAKE && ALPHA_PRIMO || ALPHA_MIKASA && ALPHA_PRIMO || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR + depends on ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_NORITAKE || ALPHA_MIKASA || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_ALCOR default y config ALPHA_EV56 - bool "EV56 CPU (speed >= 366MHz)?" if ALPHA_ALCOR - default y if ALPHA_RX164 || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_PC164 || ALPHA_TAKARA - -config ALPHA_EV56 - prompt "EV56 CPU (speed >= 333MHz)?" - depends on ALPHA_NORITAKE || ALPHA_PRIMO - -config ALPHA_EV56 - prompt "EV56 CPU (speed >= 400MHz)?" - depends on ALPHA_RAWHIDE - -config ALPHA_PRIMO - bool "EV5 CPU daughtercard (model 5/xxx)?" - depends on ALPHA_NORITAKE || ALPHA_MIKASA - help - Say Y if you have an AS 1000 5/xxx or an AS 1000A 5/xxx. - -config ALPHA_GAMMA - bool "EV5 CPU(s) (model 5/xxx)?" if ALPHA_SABLE - depends on ALPHA_SABLE || ALPHA_LYNX - default ALPHA_LYNX - help - Say Y if you have an AS 2000 5/xxx or an AS 2100 5/xxx. + bool + default y if ALPHA_ALCOR || ALPHA_RX164 || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_NORITAKE || ALPHA_MIKASA || ALPHA_RAWHIDE || ALPHA_SABLE config ALPHA_T2 bool - depends on ALPHA_SABLE || ALPHA_LYNX + depends on ALPHA_SABLE default y config ALPHA_PYXIS @@ -443,15 +295,6 @@ config GENERIC_HWEIGHT bool default y if !ALPHA_EV67 -config ALPHA_AVANTI - bool - depends on ALPHA_XL || ALPHA_AVANTI_CH - default y - help - Avanti AS 200, AS 205, AS 250, AS 255, AS 300, and AS 400-based - Alphas. Info at - <http://www.unix-ag.org/Linux-Alpha/Architectures/Avanti.html>. - config ALPHA_BROKEN_IRQ_MASK bool depends on ALPHA_GENERIC || ALPHA_PC164 @@ -481,9 +324,9 @@ config ALPHA_QEMU config ALPHA_SRM - bool "Use SRM as bootloader" if ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_NAUTILUS || ALPHA_NONAME + bool "Use SRM as bootloader" if ALPHA_PC164 || ALPHA_TAKARA || ALPHA_ALCOR || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_NAUTILUS depends on TTY - default y if ALPHA_JENSEN || ALPHA_MIKASA || ALPHA_SABLE || ALPHA_LYNX || ALPHA_NORITAKE || ALPHA_DP264 || ALPHA_RAWHIDE || ALPHA_EIGER || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_SHARK || ALPHA_MARVEL + default y if ALPHA_MIKASA || ALPHA_SABLE || ALPHA_NORITAKE || ALPHA_DP264 || ALPHA_RAWHIDE || ALPHA_EIGER || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_SHARK || ALPHA_MARVEL help There are two different types of booting firmware on Alphas: SRM, which is command line driven, and ARC, which uses menus and arrow @@ -509,7 +352,7 @@ config ARCH_MAY_HAVE_PC_FDC config SMP bool "Symmetric multi-processing support" - depends on ALPHA_SABLE || ALPHA_LYNX || ALPHA_RAWHIDE || ALPHA_DP264 || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_GENERIC || ALPHA_SHARK || ALPHA_MARVEL + depends on ALPHA_SABLE || ALPHA_RAWHIDE || ALPHA_DP264 || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_GENERIC || ALPHA_SHARK || ALPHA_MARVEL help This enables support for systems with more than one CPU. If you have a system with only one CPU, say N. If you have a system with more @@ -545,7 +388,7 @@ config ARCH_SPARSEMEM_ENABLE config ALPHA_WTINT bool "Use WTINT" if ALPHA_SRM || ALPHA_GENERIC default y if ALPHA_QEMU - default n if ALPHA_EV5 || ALPHA_EV56 || (ALPHA_EV4 && !ALPHA_LCA) + default n if ALPHA_EV56 default n if !ALPHA_SRM && !ALPHA_GENERIC default y if SMP help |