Core elements

The Industrial I/O core offers a unified framework for writing drivers for many different types of embedded sensors. a standard interface to user space applications manipulating sensors. The implementation can be found under drivers/iio/industrialio-*

Industrial I/O Devices

An IIO device usually corresponds to a single hardware sensor and it provides all the information needed by a driver handling a device. Let’s first have a look at the functionality embedded in an IIO device then we will show how a device driver makes use of an IIO device.

There are two ways for a user space application to interact with an IIO driver.

  1. /sys/bus/iio/iio:deviceX/, this represents a hardware sensor and groups together the data channels of the same chip.
  2. /dev/iio:deviceX, character device node interface used for buffered data transfer and for events information retrieval.

A typical IIO driver will register itself as an I2C or SPI driver and will create two routines, probe and remove.

At probe:

  1. Call iio_device_alloc(), which allocates memory for an IIO device.
  2. Initialize IIO device fields with driver specific information (e.g. device name, device channels).
  3. Call iio_device_register(), this registers the device with the IIO core. After this call the device is ready to accept requests from user space applications.

At remove, we free the resources allocated in probe in reverse order:

  1. iio_device_unregister(), unregister the device from the IIO core.
  2. iio_device_free(), free the memory allocated for the IIO device.

IIO device sysfs interface

Attributes are sysfs files used to expose chip info and also allowing applications to set various configuration parameters. For device with index X, attributes can be found under /sys/bus/iio/iio:deviceX/ directory. Common attributes are:

  • name, description of the physical chip.
  • dev, shows the major:minor pair associated with /dev/iio:deviceX node.
  • sampling_frequency_available, available discrete set of sampling frequency values for device.
  • Available standard attributes for IIO devices are described in the Documentation/ABI/testing/sysfs-bus-iio file in the Linux kernel sources.

IIO device channels

struct iio_chan_spec - specification of a single channel

An IIO device channel is a representation of a data channel. An IIO device can have one or multiple channels. For example:

  • a thermometer sensor has one channel representing the temperature measurement.
  • a light sensor with two channels indicating the measurements in the visible and infrared spectrum.
  • an accelerometer can have up to 3 channels representing acceleration on X, Y and Z axes.

An IIO channel is described by the struct iio_chan_spec. A thermometer driver for the temperature sensor in the example above would have to describe its channel as follows:

static const struct iio_chan_spec temp_channel[] = {
     {
         .type = IIO_TEMP,
         .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
     },
};

Channel sysfs attributes exposed to userspace are specified in the form of bitmasks. Depending on their shared info, attributes can be set in one of the following masks:

  • info_mask_separate, attributes will be specific to this channel
  • info_mask_shared_by_type, attributes are shared by all channels of the same type
  • info_mask_shared_by_dir, attributes are shared by all channels of the same direction
  • info_mask_shared_by_all, attributes are shared by all channels

When there are multiple data channels per channel type we have two ways to distinguish between them:

  • set .modified field of iio_chan_spec to 1. Modifiers are specified using .channel2 field of the same iio_chan_spec structure and are used to indicate a physically unique characteristic of the channel such as its direction or spectral response. For example, a light sensor can have two channels, one for infrared light and one for both infrared and visible light.
  • set .indexed field of iio_chan_spec to 1. In this case the channel is simply another instance with an index specified by the .channel field.

Here is how we can make use of the channel’s modifiers:

static const struct iio_chan_spec light_channels[] = {
        {
                .type = IIO_INTENSITY,
                .modified = 1,
                .channel2 = IIO_MOD_LIGHT_IR,
                .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
                .info_mask_shared = BIT(IIO_CHAN_INFO_SAMP_FREQ),
        },
        {
                .type = IIO_INTENSITY,
                .modified = 1,
                .channel2 = IIO_MOD_LIGHT_BOTH,
                .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
                .info_mask_shared = BIT(IIO_CHAN_INFO_SAMP_FREQ),
        },
        {
                .type = IIO_LIGHT,
                .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
                .info_mask_shared = BIT(IIO_CHAN_INFO_SAMP_FREQ),
        },
   }

This channel’s definition will generate two separate sysfs files for raw data retrieval:

  • /sys/bus/iio/iio:deviceX/in_intensity_ir_raw
  • /sys/bus/iio/iio:deviceX/in_intensity_both_raw

one file for processed data:

  • /sys/bus/iio/iio:deviceX/in_illuminance_input

and one shared sysfs file for sampling frequency:

  • /sys/bus/iio/iio:deviceX/sampling_frequency.

Here is how we can make use of the channel’s indexing:

static const struct iio_chan_spec light_channels[] = {
        {
                .type = IIO_VOLTAGE,
                .indexed = 1,
                .channel = 0,
                .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
        },
        {
                .type = IIO_VOLTAGE,
                .indexed = 1,
                .channel = 1,
                .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
        },
}

This will generate two separate attributes files for raw data retrieval:

  • /sys/bus/iio/devices/iio:deviceX/in_voltage0_raw, representing voltage measurement for channel 0.
  • /sys/bus/iio/devices/iio:deviceX/in_voltage1_raw, representing voltage measurement for channel 1.

More details

struct iio_chan_spec_ext_info

Extended channel info attribute

Definition

struct iio_chan_spec_ext_info {
  const char *name;
  enum iio_shared_by shared;
  ssize_t (*read)(struct iio_dev *, uintptr_t private, struct iio_chan_spec const *, char *buf);
  ssize_t (*write)(struct iio_dev *, uintptr_t private,struct iio_chan_spec const *, const char *buf, size_t len);
  uintptr_t private;
};

Members

name
Info attribute name
shared
Whether this attribute is shared between all channels.
read
Read callback for this info attribute, may be NULL.
write
Write callback for this info attribute, may be NULL.
private
Data private to the driver.
struct iio_enum

Enum channel info attribute

Definition

struct iio_enum {
  const char * const *items;
  unsigned int num_items;
  int (*set)(struct iio_dev *, const struct iio_chan_spec *, unsigned int);
  int (*get)(struct iio_dev *, const struct iio_chan_spec *);
};

Members

items
An array of strings.
num_items
Length of the item array.
set
Set callback function, may be NULL.
get
Get callback function, may be NULL.

Description

The iio_enum struct can be used to implement enum style channel attributes. Enum style attributes are those which have a set of strings which map to unsigned integer values. The IIO enum helper code takes care of mapping between value and string as well as generating a “_available” file which contains a list of all available items. The set callback will be called when the attribute is updated. The last parameter is the index to the newly activated item. The get callback will be used to query the currently active item and is supposed to return the index for it.

IIO_ENUM(_name, _shared, _e)

Initialize enum extended channel attribute

Parameters

_name
Attribute name
_shared
Whether the attribute is shared between all channels
_e
Pointer to an iio_enum struct

Description

This should usually be used together with IIO_ENUM_AVAILABLE()

IIO_ENUM_AVAILABLE(_name, _e)

Initialize enum available extended channel attribute

Parameters

_name
Attribute name (“_available” will be appended to the name)
_e
Pointer to an iio_enum struct

Description

Creates a read only attribute which lists all the available enum items in a space separated list. This should usually be used together with IIO_ENUM()

struct iio_mount_matrix

iio mounting matrix

Definition

struct iio_mount_matrix {
  const char *rotation[9];
};

Members

rotation
3 dimensional space rotation matrix defining sensor alignment with main hardware
IIO_MOUNT_MATRIX(_shared, _get)

Initialize mount matrix extended channel attribute

Parameters

_shared
Whether the attribute is shared between all channels
_get
Pointer to an iio_get_mount_matrix_t accessor
struct iio_event_spec

specification for a channel event

Definition

struct iio_event_spec {
  enum iio_event_type type;
  enum iio_event_direction dir;
  unsigned long mask_separate;
  unsigned long mask_shared_by_type;
  unsigned long mask_shared_by_dir;
  unsigned long mask_shared_by_all;
};

Members

type
Type of the event
dir
Direction of the event
mask_separate
Bit mask of enum iio_event_info values. Attributes set in this mask will be registered per channel.
mask_shared_by_type
Bit mask of enum iio_event_info values. Attributes set in this mask will be shared by channel type.
mask_shared_by_dir
Bit mask of enum iio_event_info values. Attributes set in this mask will be shared by channel type and direction.
mask_shared_by_all
Bit mask of enum iio_event_info values. Attributes set in this mask will be shared by all channels.
struct iio_chan_spec

specification of a single channel

Definition

struct iio_chan_spec {
  enum iio_chan_type      type;
  int channel;
  int channel2;
  unsigned long           address;
  int scan_index;
  struct {
    char sign;
    u8 realbits;
    u8 storagebits;
    u8 shift;
    u8 repeat;
    enum iio_endian endianness;
  } scan_type;
  long info_mask_separate;
  long info_mask_separate_available;
  long info_mask_shared_by_type;
  long info_mask_shared_by_type_available;
  long info_mask_shared_by_dir;
  long info_mask_shared_by_dir_available;
  long info_mask_shared_by_all;
  long info_mask_shared_by_all_available;
  const struct iio_event_spec *event_spec;
  unsigned int            num_event_specs;
  const struct iio_chan_spec_ext_info *ext_info;
  const char              *extend_name;
  const char              *datasheet_name;
  unsigned modified:1;
  unsigned indexed:1;
  unsigned output:1;
  unsigned differential:1;
};

Members

type
What type of measurement is the channel making.
channel
What number do we wish to assign the channel.
channel2
If there is a second number for a differential channel then this is it. If modified is set then the value here specifies the modifier.
address
Driver specific identifier.
scan_index
Monotonic index to give ordering in scans when read from a buffer.
scan_type
struct describing the scan type
scan_type.sign
‘s’ or ‘u’ to specify signed or unsigned
scan_type.realbits
Number of valid bits of data
scan_type.storagebits
Realbits + padding
scan_type.shift
Shift right by this before masking out realbits.
scan_type.repeat
Number of times real/storage bits repeats. When the repeat element is more than 1, then the type element in sysfs will show a repeat value. Otherwise, the number of repetitions is omitted.
scan_type.endianness
little or big endian
info_mask_separate
What information is to be exported that is specific to this channel.
info_mask_separate_available
What availability information is to be exported that is specific to this channel.
info_mask_shared_by_type
What information is to be exported that is shared by all channels of the same type.
info_mask_shared_by_type_available
What availability information is to be exported that is shared by all channels of the same type.
info_mask_shared_by_dir
What information is to be exported that is shared by all channels of the same direction.
info_mask_shared_by_dir_available
What availability information is to be exported that is shared by all channels of the same direction.
info_mask_shared_by_all
What information is to be exported that is shared by all channels.
info_mask_shared_by_all_available
What availability information is to be exported that is shared by all channels.
event_spec
Array of events which should be registered for this channel.
num_event_specs
Size of the event_spec array.
ext_info
Array of extended info attributes for this channel. The array is NULL terminated, the last element should have its name field set to NULL.
extend_name
Allows labeling of channel attributes with an informative name. Note this has no effect codes etc, unlike modifiers.
datasheet_name
A name used in in-kernel mapping of channels. It should correspond to the first name that the channel is referred to by in the datasheet (e.g. IND), or the nearest possible compound name (e.g. IND-INC).
modified
Does a modifier apply to this channel. What these are depends on the channel type. Modifier is set in channel2. Examples are IIO_MOD_X for axial sensors about the ‘x’ axis.
indexed
Specify the channel has a numerical index. If not, the channel index number will be suppressed for sysfs attributes but not for event codes.
output
Channel is output.
differential
Channel is differential.
bool iio_channel_has_info(const struct iio_chan_spec * chan, enum iio_chan_info_enum type)

Checks whether a channel supports a info attribute

Parameters

const struct iio_chan_spec * chan
The channel to be queried
enum iio_chan_info_enum type
Type of the info attribute to be checked

Description

Returns true if the channels supports reporting values for the given info attribute type, false otherwise.

bool iio_channel_has_available(const struct iio_chan_spec * chan, enum iio_chan_info_enum type)

Checks if a channel has an available attribute

Parameters

const struct iio_chan_spec * chan
The channel to be queried
enum iio_chan_info_enum type
Type of the available attribute to be checked

Description

Returns true if the channel supports reporting available values for the given attribute type, false otherwise.

struct iio_info

constant information about device

Definition

struct iio_info {
  const struct attribute_group    *event_attrs;
  const struct attribute_group    *attrs;
  int (*read_raw)(struct iio_dev *indio_dev,struct iio_chan_spec const *chan,int *val,int *val2, long mask);
  int (*read_raw_multi)(struct iio_dev *indio_dev,struct iio_chan_spec const *chan,int max_len,int *vals,int *val_len, long mask);
  int (*read_avail)(struct iio_dev *indio_dev,struct iio_chan_spec const *chan,const int **vals,int *type,int *length, long mask);
  int (*write_raw)(struct iio_dev *indio_dev,struct iio_chan_spec const *chan,int val,int val2, long mask);
  int (*write_raw_get_fmt)(struct iio_dev *indio_dev,struct iio_chan_spec const *chan, long mask);
  int (*read_event_config)(struct iio_dev *indio_dev,const struct iio_chan_spec *chan,enum iio_event_type type, enum iio_event_direction dir);
  int (*write_event_config)(struct iio_dev *indio_dev,const struct iio_chan_spec *chan,enum iio_event_type type,enum iio_event_direction dir, int state);
  int (*read_event_value)(struct iio_dev *indio_dev,const struct iio_chan_spec *chan,enum iio_event_type type,enum iio_event_direction dir, enum iio_event_info info, int *val, int *val2);
  int (*write_event_value)(struct iio_dev *indio_dev,const struct iio_chan_spec *chan,enum iio_event_type type,enum iio_event_direction dir, enum iio_event_info info, int val, int val2);
  int (*validate_trigger)(struct iio_dev *indio_dev, struct iio_trigger *trig);
  int (*update_scan_mode)(struct iio_dev *indio_dev, const unsigned long *scan_mask);
  int (*debugfs_reg_access)(struct iio_dev *indio_dev,unsigned reg, unsigned writeval, unsigned *readval);
  int (*of_xlate)(struct iio_dev *indio_dev, const struct of_phandle_args *iiospec);
  int (*hwfifo_set_watermark)(struct iio_dev *indio_dev, unsigned val);
  int (*hwfifo_flush_to_buffer)(struct iio_dev *indio_dev, unsigned count);
};

Members

event_attrs
event control attributes
attrs
general purpose device attributes
read_raw
function to request a value from the device. mask specifies which value. Note 0 means a reading of the channel in question. Return value will specify the type of value returned by the device. val and val2 will contain the elements making up the returned value.
read_raw_multi
function to return values from the device. mask specifies which value. Note 0 means a reading of the channel in question. Return value will specify the type of value returned by the device. vals pointer contain the elements making up the returned value. max_len specifies maximum number of elements vals pointer can contain. val_len is used to return length of valid elements in vals.
read_avail
function to return the available values from the device. mask specifies which value. Note 0 means the available values for the channel in question. Return value specifies if a IIO_AVAIL_LIST or a IIO_AVAIL_RANGE is returned in vals. The type of the vals are returned in type and the number of vals is returned in length. For ranges, there are always three vals returned; min, step and max. For lists, all possible values are enumerated.
write_raw
function to write a value to the device. Parameters are the same as for read_raw.
write_raw_get_fmt
callback function to query the expected format/precision. If not set by the driver, write_raw returns IIO_VAL_INT_PLUS_MICRO.
read_event_config
find out if the event is enabled.
write_event_config
set if the event is enabled.
read_event_value
read a configuration value associated with the event.
write_event_value
write a configuration value for the event.
validate_trigger
function to validate the trigger when the current trigger gets changed.
update_scan_mode
function to configure device and scan buffer when channels have changed
debugfs_reg_access
function to read or write register value of device
of_xlate
function pointer to obtain channel specifier index. When #iio-cells is greater than ‘0’, the driver could provide a custom of_xlate function that reads the args and returns the appropriate index in registered IIO channels array.
hwfifo_set_watermark
function pointer to set the current hardware fifo watermark level; see hwfifo_* entries in Documentation/ABI/testing/sysfs-bus-iio for details on how the hardware fifo operates
hwfifo_flush_to_buffer
function pointer to flush the samples stored in the hardware fifo to the device buffer. The driver should not flush more than count samples. The function must return the number of samples flushed, 0 if no samples were flushed or a negative integer if no samples were flushed and there was an error.
struct iio_buffer_setup_ops

buffer setup related callbacks

Definition

struct iio_buffer_setup_ops {
  int (*preenable)(struct iio_dev *);
  int (*postenable)(struct iio_dev *);
  int (*predisable)(struct iio_dev *);
  int (*postdisable)(struct iio_dev *);
  bool (*validate_scan_mask)(struct iio_dev *indio_dev, const unsigned long *scan_mask);
};

Members

preenable
[DRIVER] function to run prior to marking buffer enabled
postenable
[DRIVER] function to run after marking buffer enabled
predisable
[DRIVER] function to run prior to marking buffer disabled
postdisable
[DRIVER] function to run after marking buffer disabled
validate_scan_mask
[DRIVER] function callback to check whether a given scan mask is valid for the device.
struct iio_dev

industrial I/O device

Definition

struct iio_dev {
  int id;
  struct module                   *driver_module;
  int modes;
  int currentmode;
  struct device                   dev;
  struct iio_event_interface      *event_interface;
  struct iio_buffer               *buffer;
  struct list_head                buffer_list;
  int scan_bytes;
  struct mutex                    mlock;
  const unsigned long             *available_scan_masks;
  unsigned masklength;
  const unsigned long             *active_scan_mask;
  bool scan_timestamp;
  unsigned scan_index_timestamp;
  struct iio_trigger              *trig;
  bool trig_readonly;
  struct iio_poll_func            *pollfunc;
  struct iio_poll_func            *pollfunc_event;
  struct iio_chan_spec const      *channels;
  int num_channels;
  struct list_head                channel_attr_list;
  struct attribute_group          chan_attr_group;
  const char                      *name;
  const struct iio_info           *info;
  clockid_t clock_id;
  struct mutex                    info_exist_lock;
  const struct iio_buffer_setup_ops       *setup_ops;
  struct cdev                     chrdev;
#define IIO_MAX_GROUPS 6;
  const struct attribute_group    *groups[IIO_MAX_GROUPS + 1];
  int groupcounter;
  unsigned long                   flags;
#if defined(CONFIG_DEBUG_FS);
  struct dentry                   *debugfs_dentry;
  unsigned cached_reg_addr;
#endif;
};

Members

id
[INTERN] used to identify device internally
driver_module
[INTERN] used to make it harder to undercut users
modes
[DRIVER] operating modes supported by device
currentmode
[DRIVER] current operating mode
dev
[DRIVER] device structure, should be assigned a parent and owner
event_interface
[INTERN] event chrdevs associated with interrupt lines
buffer
[DRIVER] any buffer present
buffer_list
[INTERN] list of all buffers currently attached
scan_bytes
[INTERN] num bytes captured to be fed to buffer demux
mlock
[DRIVER] lock used to prevent simultaneous device state changes
available_scan_masks
[DRIVER] optional array of allowed bitmasks
masklength
[INTERN] the length of the mask established from channels
active_scan_mask
[INTERN] union of all scan masks requested by buffers
scan_timestamp
[INTERN] set if any buffers have requested timestamp
scan_index_timestamp
[INTERN] cache of the index to the timestamp
trig
[INTERN] current device trigger (buffer modes)
trig_readonly
[INTERN] mark the current trigger immutable
pollfunc
[DRIVER] function run on trigger being received
pollfunc_event
[DRIVER] function run on events trigger being received
channels
[DRIVER] channel specification structure table
num_channels
[DRIVER] number of channels specified in channels.
channel_attr_list
[INTERN] keep track of automatically created channel attributes
chan_attr_group
[INTERN] group for all attrs in base directory
name
[DRIVER] name of the device.
info
[DRIVER] callbacks and constant info from driver
clock_id
[INTERN] timestamping clock posix identifier
info_exist_lock
[INTERN] lock to prevent use during removal
setup_ops
[DRIVER] callbacks to call before and after buffer enable/disable
chrdev
[INTERN] associated character device
groups
[INTERN] attribute groups
groupcounter
[INTERN] index of next attribute group
flags
[INTERN] file ops related flags including busy flag.
debugfs_dentry
[INTERN] device specific debugfs dentry.
cached_reg_addr
[INTERN] cached register address for debugfs reads.
iio_device_register(indio_dev)

register a device with the IIO subsystem

Parameters

indio_dev
Device structure filled by the device driver
devm_iio_device_register(dev, indio_dev)

Resource-managed iio_device_register()

Parameters

dev
Device to allocate iio_dev for
indio_dev
Device structure filled by the device driver

Description

Managed iio_device_register. The IIO device registered with this function is automatically unregistered on driver detach. This function calls iio_device_register() internally. Refer to that function for more information.

If an iio_dev registered with this function needs to be unregistered separately, devm_iio_device_unregister() must be used.

Return

0 on success, negative error number on failure.

void iio_device_put(struct iio_dev * indio_dev)

reference counted deallocation of struct device

Parameters

struct iio_dev * indio_dev
IIO device structure containing the device
clockid_t iio_device_get_clock(const struct iio_dev * indio_dev)

Retrieve current timestamping clock for the device

Parameters

const struct iio_dev * indio_dev
IIO device structure containing the device
struct iio_dev * dev_to_iio_dev(struct device * dev)

Get IIO device struct from a device struct

Parameters

struct device * dev
The device embedded in the IIO device

Note

The device must be a IIO device, otherwise the result is undefined.

struct iio_dev * iio_device_get(struct iio_dev * indio_dev)

increment reference count for the device

Parameters

struct iio_dev * indio_dev
IIO device structure

Return

The passed IIO device

void iio_device_set_drvdata(struct iio_dev * indio_dev, void * data)

Set device driver data

Parameters

struct iio_dev * indio_dev
IIO device structure
void * data
Driver specific data

Description

Allows to attach an arbitrary pointer to an IIO device, which can later be retrieved by iio_device_get_drvdata().

void * iio_device_get_drvdata(struct iio_dev * indio_dev)

Get device driver data

Parameters

struct iio_dev * indio_dev
IIO device structure

Description

Returns the data previously set with iio_device_set_drvdata()

bool iio_buffer_enabled(struct iio_dev * indio_dev)

helper function to test if the buffer is enabled

Parameters

struct iio_dev * indio_dev
IIO device structure for device
struct dentry * iio_get_debugfs_dentry(struct iio_dev * indio_dev)

helper function to get the debugfs_dentry

Parameters

struct iio_dev * indio_dev
IIO device structure for device
IIO_DEGREE_TO_RAD(deg)

Convert degree to rad

Parameters

deg
A value in degree

Description

Returns the given value converted from degree to rad

IIO_RAD_TO_DEGREE(rad)

Convert rad to degree

Parameters

rad
A value in rad

Description

Returns the given value converted from rad to degree

IIO_G_TO_M_S_2(g)

Convert g to meter / second**2

Parameters

g
A value in g

Description

Returns the given value converted from g to meter / second**2

IIO_M_S_2_TO_G(ms2)

Convert meter / second**2 to g

Parameters

ms2
A value in meter / second**2

Description

Returns the given value converted from meter / second**2 to g

s64 iio_get_time_ns(const struct iio_dev * indio_dev)

utility function to get a time stamp for events etc

Parameters

const struct iio_dev * indio_dev
device
unsigned int iio_get_time_res(const struct iio_dev * indio_dev)

utility function to get time stamp clock resolution in nano seconds.

Parameters

const struct iio_dev * indio_dev
device
int of_iio_read_mount_matrix(const struct device * dev, const char * propname, struct iio_mount_matrix * matrix)

retrieve iio device mounting matrix from device-tree “mount-matrix” property

Parameters

const struct device * dev
device the mounting matrix property is assigned to
const char * propname
device specific mounting matrix property name
struct iio_mount_matrix * matrix
where to store retrieved matrix

Description

If device is assigned no mounting matrix property, a default 3x3 identity matrix will be filled in.

Return

0 if success, or a negative error code on failure.

ssize_t iio_format_value(char * buf, unsigned int type, int size, int * vals)

Formats a IIO value into its string representation

Parameters

char * buf
The buffer to which the formatted value gets written which is assumed to be big enough (i.e. PAGE_SIZE).
unsigned int type
One of the IIO_VAL_* constants. This decides how the val and val2 parameters are formatted.
int size
Number of IIO value entries contained in vals
int * vals
Pointer to the values, exact meaning depends on the type parameter.

Return

0 by default, a negative number on failure or the
total number of characters written for a type that belongs to the IIO_VAL_* constant.
int iio_str_to_fixpoint(const char * str, int fract_mult, int * integer, int * fract)

Parse a fixed-point number from a string

Parameters

const char * str
The string to parse
int fract_mult
Multiplier for the first decimal place, should be a power of 10
int * integer
The integer part of the number
int * fract
The fractional part of the number

Description

Returns 0 on success, or a negative error code if the string could not be parsed.

struct iio_dev * iio_device_alloc(int sizeof_priv)

allocate an iio_dev from a driver

Parameters

int sizeof_priv
Space to allocate for private structure.
void iio_device_free(struct iio_dev * dev)

free an iio_dev from a driver

Parameters

struct iio_dev * dev
the iio_dev associated with the device
struct iio_dev * devm_iio_device_alloc(struct device * dev, int sizeof_priv)

Resource-managed iio_device_alloc()

Parameters

struct device * dev
Device to allocate iio_dev for
int sizeof_priv
Space to allocate for private structure.

Description

Managed iio_device_alloc. iio_dev allocated with this function is automatically freed on driver detach.

If an iio_dev allocated with this function needs to be freed separately, devm_iio_device_free() must be used.

Return

Pointer to allocated iio_dev on success, NULL on failure.

void devm_iio_device_free(struct device * dev, struct iio_dev * iio_dev)

Resource-managed iio_device_free()

Parameters

struct device * dev
Device this iio_dev belongs to
struct iio_dev * iio_dev
the iio_dev associated with the device

Description

Free iio_dev allocated with devm_iio_device_alloc().

void iio_device_unregister(struct iio_dev * indio_dev)

unregister a device from the IIO subsystem

Parameters

struct iio_dev * indio_dev
Device structure representing the device.
void devm_iio_device_unregister(struct device * dev, struct iio_dev * indio_dev)

Resource-managed iio_device_unregister()

Parameters

struct device * dev
Device this iio_dev belongs to
struct iio_dev * indio_dev
the iio_dev associated with the device

Description

Unregister iio_dev registered with devm_iio_device_register().

int iio_device_claim_direct_mode(struct iio_dev * indio_dev)

Keep device in direct mode

Parameters

struct iio_dev * indio_dev
the iio_dev associated with the device

Description

If the device is in direct mode it is guaranteed to stay that way until iio_device_release_direct_mode() is called.

Use with iio_device_release_direct_mode()

Return

0 on success, -EBUSY on failure

void iio_device_release_direct_mode(struct iio_dev * indio_dev)

releases claim on direct mode

Parameters

struct iio_dev * indio_dev
the iio_dev associated with the device

Description

Release the claim. Device is no longer guaranteed to stay in direct mode.

Use with iio_device_claim_direct_mode()