drm/tinydrm Driver library

This library provides driver helpers for very simple display hardware.

It is based on drm_simple_display_pipe coupled with a drm_connector which has only one fixed drm_display_mode. The framebuffers are backed by the cma helper and have support for framebuffer flushing (dirty). fbdev support is also included.

Core functionality

The driver allocates tinydrm_device, initializes it using devm_tinydrm_init(), sets up the pipeline using tinydrm_display_pipe_init() and registers the DRM device using devm_tinydrm_register().

struct tinydrm_device

tinydrm device

Definition

struct tinydrm_device {
  struct drm_device *drm;
  struct drm_simple_display_pipe pipe;
  struct mutex dirty_lock;
  const struct drm_framebuffer_funcs *fb_funcs;
};

Members

drm
DRM device
pipe
Display pipe structure
dirty_lock
Serializes framebuffer flushing
fb_funcs
Framebuffer functions used when creating framebuffers
TINYDRM_GEM_DRIVER_OPS()

default tinydrm gem operations

Parameters

Description

This macro provides a shortcut for setting the tinydrm GEM operations in the drm_driver structure.

TINYDRM_MODE(hd, vd, hd_mm, vd_mm)

tinydrm display mode

Parameters

hd
Horizontal resolution, width
vd
Vertical resolution, height
hd_mm
Display width in millimeters
vd_mm
Display height in millimeters

Description

This macro creates a drm_display_mode for use with tinydrm.

struct drm_gem_object * tinydrm_gem_cma_prime_import_sg_table(struct drm_device * drm, struct dma_buf_attachment * attach, struct sg_table * sgt)

Produce a CMA GEM object from another driver’s scatter/gather table of pinned pages

Parameters

struct drm_device * drm
DRM device to import into
struct dma_buf_attachment * attach
DMA-BUF attachment
struct sg_table * sgt
Scatter/gather table of pinned pages

Description

This function imports a scatter/gather table exported via DMA-BUF by another driver using drm_gem_cma_prime_import_sg_table(). It sets the kernel virtual address on the CMA object. Drivers should use this as their drm_driver->gem_prime_import_sg_table callback if they need the virtual address. tinydrm_gem_cma_free_object() should be used in combination with this function.

Return

A pointer to a newly created GEM object or an ERR_PTR-encoded negative error code on failure.

void tinydrm_gem_cma_free_object(struct drm_gem_object * gem_obj)

Free resources associated with a CMA GEM object

Parameters

struct drm_gem_object * gem_obj
GEM object to free

Description

This function frees the backing memory of the CMA GEM object, cleans up the GEM object state and frees the memory used to store the object itself using drm_gem_cma_free_object(). It also handles PRIME buffers which has the kernel virtual address set by tinydrm_gem_cma_prime_import_sg_table(). Drivers can use this as their drm_driver->gem_free_object callback.

int devm_tinydrm_init(struct device * parent, struct tinydrm_device * tdev, const struct drm_framebuffer_funcs * fb_funcs, struct drm_driver * driver)

Initialize tinydrm device

Parameters

struct device * parent
Parent device object
struct tinydrm_device * tdev
tinydrm device
const struct drm_framebuffer_funcs * fb_funcs
Framebuffer functions
struct drm_driver * driver
DRM driver

Description

This function initializes tdev, the underlying DRM device and it’s mode_config. Resources will be automatically freed on driver detach (devres) using drm_mode_config_cleanup() and drm_dev_unref().

Return

Zero on success, negative error code on failure.

int devm_tinydrm_register(struct tinydrm_device * tdev)

Register tinydrm device

Parameters

struct tinydrm_device * tdev
tinydrm device

Description

This function registers the underlying DRM device and fbdev. These resources will be automatically unregistered on driver detach (devres) and the display pipeline will be disabled.

Return

Zero on success, negative error code on failure.

void tinydrm_shutdown(struct tinydrm_device * tdev)

Shutdown tinydrm

Parameters

struct tinydrm_device * tdev
tinydrm device

Description

This function makes sure that the display pipeline is disabled. Used by drivers in their shutdown callback to turn off the display on machine shutdown and reboot.

void tinydrm_display_pipe_update(struct drm_simple_display_pipe * pipe, struct drm_plane_state * old_state)

Display pipe update helper

Parameters

struct drm_simple_display_pipe * pipe
Simple display pipe
struct drm_plane_state * old_state
Old plane state

Description

This function does a full framebuffer flush if the plane framebuffer has changed. It also handles vblank events. Drivers can use this as their drm_simple_display_pipe_funcs->update callback.

int tinydrm_display_pipe_prepare_fb(struct drm_simple_display_pipe * pipe, struct drm_plane_state * plane_state)

Display pipe prepare_fb helper

Parameters

struct drm_simple_display_pipe * pipe
Simple display pipe
struct drm_plane_state * plane_state
Plane state

Description

This function uses drm_gem_fb_prepare_fb() to check if the plane FB has an dma-buf attached, extracts the exclusive fence and attaches it to plane state for the atomic helper to wait on. Drivers can use this as their drm_simple_display_pipe_funcs->prepare_fb callback.

int tinydrm_display_pipe_init(struct tinydrm_device * tdev, const struct drm_simple_display_pipe_funcs * funcs, int connector_type, const uint32_t * formats, unsigned int format_count, const struct drm_display_mode * mode, unsigned int rotation)

Initialize display pipe

Parameters

struct tinydrm_device * tdev
tinydrm device
const struct drm_simple_display_pipe_funcs * funcs
Display pipe functions
int connector_type
Connector type
const uint32_t * formats
Array of supported formats (DRM_FORMAT_*)
unsigned int format_count
Number of elements in formats
const struct drm_display_mode * mode
Supported mode
unsigned int rotation
Initial mode rotation in degrees Counter Clock Wise

Description

This function sets up a drm_simple_display_pipe with a drm_connector that has one fixed drm_display_mode which is rotated according to rotation.

Return

Zero on success, negative error code on failure.

Additional helpers

bool tinydrm_machine_little_endian(void)

Machine is little endian

Parameters

void
no arguments

Return

true if defined(__LITTLE_ENDIAN), false otherwise

void tinydrm_dbg_spi_message(struct spi_device * spi, struct spi_message * m)

Dump SPI message

Parameters

struct spi_device * spi
SPI device
struct spi_message * m
SPI message

Description

Dumps info about the transfers in a SPI message including buffer content. DEBUG has to be defined for this function to be enabled alongside setting the DRM_UT_DRIVER bit of drm_debug.

bool tinydrm_merge_clips(struct drm_clip_rect * dst, struct drm_clip_rect * src, unsigned int num_clips, unsigned int flags, u32 max_width, u32 max_height)

Merge clip rectangles

Parameters

struct drm_clip_rect * dst
Destination clip rectangle
struct drm_clip_rect * src
Source clip rectangle(s)
unsigned int num_clips
Number of src clip rectangles
unsigned int flags
Dirty fb ioctl flags
u32 max_width
Maximum width of dst
u32 max_height
Maximum height of dst

Description

This function merges src clip rectangle(s) into dst. If src is NULL, max_width and min_width is used to set a full dst clip rectangle.

Return

true if it’s a full clip, false otherwise

void tinydrm_memcpy(void * dst, void * vaddr, struct drm_framebuffer * fb, struct drm_clip_rect * clip)

Copy clip buffer

Parameters

void * dst
Destination buffer
void * vaddr
Source buffer
struct drm_framebuffer * fb
DRM framebuffer
struct drm_clip_rect * clip
Clip rectangle area to copy
void tinydrm_swab16(u16 * dst, void * vaddr, struct drm_framebuffer * fb, struct drm_clip_rect * clip)

Swap bytes into clip buffer

Parameters

u16 * dst
RGB565 destination buffer
void * vaddr
RGB565 source buffer
struct drm_framebuffer * fb
DRM framebuffer
struct drm_clip_rect * clip
Clip rectangle area to copy
void tinydrm_xrgb8888_to_rgb565(u16 * dst, void * vaddr, struct drm_framebuffer * fb, struct drm_clip_rect * clip, bool swap)

Convert XRGB8888 to RGB565 clip buffer

Parameters

u16 * dst
RGB565 destination buffer
void * vaddr
XRGB8888 source buffer
struct drm_framebuffer * fb
DRM framebuffer
struct drm_clip_rect * clip
Clip rectangle area to copy
bool swap
Swap bytes

Description

Drivers can use this function for RGB565 devices that don’t natively support XRGB8888.

void tinydrm_xrgb8888_to_gray8(u8 * dst, void * vaddr, struct drm_framebuffer * fb, struct drm_clip_rect * clip)

Convert XRGB8888 to grayscale

Parameters

u8 * dst
8-bit grayscale destination buffer
void * vaddr
XRGB8888 source buffer
struct drm_framebuffer * fb
DRM framebuffer
struct drm_clip_rect * clip
Clip rectangle area to copy

Description

Drm doesn’t have native monochrome or grayscale support. Such drivers can announce the commonly supported XR24 format to userspace and use this function to convert to the native format.

Monochrome drivers will use the most significant bit, where 1 means foreground color and 0 background color.

ITU BT.601 is used for the RGB -> luma (brightness) conversion.

struct backlight_device * tinydrm_of_find_backlight(struct device * dev)

Find backlight device in device-tree

Parameters

struct device * dev
Device

Description

This function looks for a DT node pointed to by a property named ‘backlight’ and uses of_find_backlight_by_node() to get the backlight device. Additionally if the brightness property is zero, it is set to max_brightness.

Return

NULL if there’s no backlight property. Error pointer -EPROBE_DEFER if the DT node is found, but no backlight device is found. If the backlight device is found, a pointer to the structure is returned.

int tinydrm_enable_backlight(struct backlight_device * backlight)

Enable backlight helper

Parameters

struct backlight_device * backlight
Backlight device

Return

Zero on success, negative error code on failure.

int tinydrm_disable_backlight(struct backlight_device * backlight)

Disable backlight helper

Parameters

struct backlight_device * backlight
Backlight device

Return

Zero on success, negative error code on failure.

size_t tinydrm_spi_max_transfer_size(struct spi_device * spi, size_t max_len)

Determine max SPI transfer size

Parameters

struct spi_device * spi
SPI device
size_t max_len
Maximum buffer size needed (optional)

Description

This function returns the maximum size to use for SPI transfers. It checks the SPI master, the optional max_len and the module parameter spi_max and returns the smallest.

Return

Maximum size for SPI transfers

bool tinydrm_spi_bpw_supported(struct spi_device * spi, u8 bpw)

Check if bits per word is supported

Parameters

struct spi_device * spi
SPI device
u8 bpw
Bits per word

Description

This function checks to see if the SPI master driver supports bpw.

Return

True if bpw is supported, false otherwise.

int tinydrm_spi_transfer(struct spi_device * spi, u32 speed_hz, struct spi_transfer * header, u8 bpw, const void * buf, size_t len)

SPI transfer helper

Parameters

struct spi_device * spi
SPI device
u32 speed_hz
Override speed (optional)
struct spi_transfer * header
Optional header transfer
u8 bpw
Bits per word
const void * buf
Buffer to transfer
size_t len
Buffer length

Description

This SPI transfer helper breaks up the transfer of buf into chunks which the SPI master driver can handle. If the machine is Little Endian and the SPI master driver doesn’t support 16 bits per word, it swaps the bytes and does a 8-bit transfer. If header is set, it is prepended to each SPI message.

Return

Zero on success, negative error code on failure.

MIPI DBI Compatible Controllers

This library provides helpers for MIPI Display Bus Interface (DBI) compatible display controllers.

Many controllers for tiny lcd displays are MIPI compliant and can use this library. If a controller uses registers 0x2A and 0x2B to set the area to update and uses register 0x2C to write to frame memory, it is most likely MIPI compliant.

Only MIPI Type 1 displays are supported since a full frame memory is needed.

There are 3 MIPI DBI implementation types:

  1. Motorola 6800 type parallel bus
  2. Intel 8080 type parallel bus
  3. SPI type with 3 options:
    1. 9-bit with the Data/Command signal as the ninth bit
    2. Same as above except it’s sent as 16 bits
    3. 8-bit with the Data/Command signal as a separate D/CX pin

Currently mipi_dbi only supports Type C options 1 and 3 with mipi_dbi_spi_init().

struct mipi_dbi

MIPI DBI controller

Definition

struct mipi_dbi {
  struct tinydrm_device tinydrm;
  struct spi_device *spi;
  bool enabled;
  struct mutex cmdlock;
  int (*command)(struct mipi_dbi *mipi, u8 cmd, u8 *param, size_t num);
  const u8 *read_commands;
  struct gpio_desc *dc;
  u16 *tx_buf;
  void *tx_buf9;
  size_t tx_buf9_len;
  bool swap_bytes;
  struct gpio_desc *reset;
  unsigned int rotation;
  struct backlight_device *backlight;
  struct regulator *regulator;
};

Members

tinydrm
tinydrm base
spi
SPI device
enabled
Pipeline is enabled
cmdlock
Command lock
command
Bus specific callback executing commands.
read_commands
Array of read commands terminated by a zero entry. Reading is disabled if this is NULL.
dc
Optional D/C gpio.
tx_buf
Buffer used for transfer (copy clip rect area)
tx_buf9
Buffer used for Option 1 9-bit conversion
tx_buf9_len
Size of tx_buf9.
swap_bytes
Swap bytes in buffer before transfer
reset
Optional reset gpio
rotation
initial rotation in degrees Counter Clock Wise
backlight
backlight device (optional)
regulator
power regulator (optional)
mipi_dbi_command(mipi, cmd, seq...)

MIPI DCS command with optional parameter(s)

Parameters

mipi
MIPI structure
cmd
Command
seq...
Optional parameter(s)

Description

Send MIPI DCS command to the controller. Use mipi_dbi_command_read() for get/read.

Return

Zero on success, negative error code on failure.

int mipi_dbi_command_read(struct mipi_dbi * mipi, u8 cmd, u8 * val)

MIPI DCS read command

Parameters

struct mipi_dbi * mipi
MIPI structure
u8 cmd
Command
u8 * val
Value read

Description

Send MIPI DCS read command to the controller.

Return

Zero on success, negative error code on failure.

int mipi_dbi_command_buf(struct mipi_dbi * mipi, u8 cmd, u8 * data, size_t len)

MIPI DCS command with parameter(s) in an array

Parameters

struct mipi_dbi * mipi
MIPI structure
u8 cmd
Command
u8 * data
Parameter buffer
size_t len
Buffer length

Return

Zero on success, negative error code on failure.

int mipi_dbi_buf_copy(void * dst, struct drm_framebuffer * fb, struct drm_clip_rect * clip, bool swap)

Copy a framebuffer, transforming it if necessary

Parameters

void * dst
The destination buffer
struct drm_framebuffer * fb
The source framebuffer
struct drm_clip_rect * clip
Clipping rectangle of the area to be copied
bool swap
When true, swap MSB/LSB of 16-bit values

Return

Zero on success, negative error code on failure.

void mipi_dbi_pipe_enable(struct drm_simple_display_pipe * pipe, struct drm_crtc_state * crtc_state)

MIPI DBI pipe enable helper

Parameters

struct drm_simple_display_pipe * pipe
Display pipe
struct drm_crtc_state * crtc_state
CRTC state

Description

This function enables backlight. Drivers can use this as their drm_simple_display_pipe_funcs->enable callback.

void mipi_dbi_pipe_disable(struct drm_simple_display_pipe * pipe)

MIPI DBI pipe disable helper

Parameters

struct drm_simple_display_pipe * pipe
Display pipe

Description

This function disables backlight if present or if not the display memory is blanked. Drivers can use this as their drm_simple_display_pipe_funcs->disable callback.

int mipi_dbi_init(struct device * dev, struct mipi_dbi * mipi, const struct drm_simple_display_pipe_funcs * pipe_funcs, struct drm_driver * driver, const struct drm_display_mode * mode, unsigned int rotation)

MIPI DBI initialization

Parameters

struct device * dev
Parent device
struct mipi_dbi * mipi
mipi_dbi structure to initialize
const struct drm_simple_display_pipe_funcs * pipe_funcs
Display pipe functions
struct drm_driver * driver
DRM driver
const struct drm_display_mode * mode
Display mode
unsigned int rotation
Initial rotation in degrees Counter Clock Wise

Description

This function initializes a mipi_dbi structure and it’s underlying tinydrm_device. It also sets up the display pipeline.

Supported formats: Native RGB565 and emulated XRGB8888.

Objects created by this function will be automatically freed on driver detach (devres).

Return

Zero on success, negative error code on failure.

void mipi_dbi_hw_reset(struct mipi_dbi * mipi)

Hardware reset of controller

Parameters

struct mipi_dbi * mipi
MIPI DBI structure

Description

Reset controller if the mipi_dbi->reset gpio is set.

bool mipi_dbi_display_is_on(struct mipi_dbi * mipi)

Check if display is on

Parameters

struct mipi_dbi * mipi
MIPI DBI structure

Description

This function checks the Power Mode register (if readable) to see if display output is turned on. This can be used to see if the bootloader has already turned on the display avoiding flicker when the pipeline is enabled.

Return

true if the display can be verified to be on, false otherwise.

u32 mipi_dbi_spi_cmd_max_speed(struct spi_device * spi, size_t len)

get the maximum SPI bus speed

Parameters

struct spi_device * spi
SPI device
size_t len
The transfer buffer length.

Description

Many controllers have a max speed of 10MHz, but can be pushed way beyond that. Increase reliability by running pixel data at max speed and the rest at 10MHz, preventing transfer glitches from messing up the init settings.

int mipi_dbi_spi_init(struct spi_device * spi, struct mipi_dbi * mipi, struct gpio_desc * dc)

Initialize MIPI DBI SPI interfaced controller

Parameters

struct spi_device * spi
SPI device
struct mipi_dbi * mipi
mipi_dbi structure to initialize
struct gpio_desc * dc
D/C gpio (optional)

Description

This function sets mipi_dbi->command, enables mipi->read_commands for the usual read commands. It should be followed by a call to mipi_dbi_init() or a driver-specific init.

If dc is set, a Type C Option 3 interface is assumed, if not Type C Option 1.

If the SPI master driver doesn’t support the necessary bits per word, the following transformation is used:

  • 9-bit: reorder buffer as 9x 8-bit words, padded with no-op command.
  • 16-bit: if big endian send as 8-bit, if little endian swap bytes

Return

Zero on success, negative error code on failure.

int mipi_dbi_debugfs_init(struct drm_minor * minor)

Create debugfs entries

Parameters

struct drm_minor * minor
DRM minor

Description

This function creates a ‘command’ debugfs file for sending commands to the controller or getting the read command values. Drivers can use this as their drm_driver->debugfs_init callback.

Return

Zero on success, negative error code on failure.