diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2021-11-01 19:16:49 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2021-11-01 19:16:49 -0700 |
| commit | d54f486035fd89f14845a7f34a97a3f5da4e70f2 (patch) | |
| tree | 01fd06f4c111a25f393c3dd8d2637e038ceb71fe | |
| parent | 2019295c9ea3137364682046bb6afc0eb364e591 (diff) | |
| parent | 10f0d2ab9aa672707559d46601fd35544759ff70 (diff) | |
| download | linux-d54f486035fd89f14845a7f34a97a3f5da4e70f2.tar.gz | |
Merge tag 'hwmon-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New driver:
- Maxim MAX6620
Notable functional enhancements:
- Add Asus WMI support to nct6775 driver, and list boards supporting
it
- Move TMP461 support from tm401 driver to lm90 driver
- Add support for fanX_min, fanX_max and fanX_target to dell-smm
driver, and clean it up while doing so
- Extend mlxreg-fan driver to support multiple cooling devices and
multiple PWM channels. Also increase number of supported fan
tachometers.
- Add a new customer ID (for ASRock) to nct6683 driver
- Make temperature/voltage sensors on nct7802 configurable
- Add mfg_id debugfs entry to pmbus/ibm-cffps driver
- Support configurable sense resistor values in pmbus/lm25066, and
fix various coefficients
- Use generic notification mechanism in raspberrypi driver
Notable cleanups:
- Convert various devicetree bindings to dtschema, and add missing
bindings
- Convert i5500_temp and tmp103 drivers to
devm_hwmon_device_register_with_info
- Clean up non-bool "valid" data fields
- Improve devicetree configurability for tmp421 driver"
* tag 'hwmon-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (73 commits)
hwmon: (nct7802) Add of_node_put() before return
hwmon: (tmp401) Drop support for TMP461
hwmon: (lm90) Add basic support for TI TMP461
hwmon: (lm90) Introduce flag indicating extended temperature support
hwmon: (nct6775) add ProArt X570-CREATOR WIFI.
hwmon: (nct7802) Make temperature/voltage sensors configurable
dt-bindings: hwmon: Add nct7802 bindings
hwmon: (dell-smm) Speed up setting of fan speed
hwmon: (dell-smm) Add comment explaining usage of i8k_config_data[]
hwmon: (dell-smm) Return -ENOIOCTLCMD instead of -EINVAL
hwmon: (dell-smm) Use strscpy_pad()
hwmon: (dell-smm) Sort includes in alphabetical order
hwmon: (tmp421) Add of_node_put() before return
hwmon: (max31722) Warn about failure to put device in stand-by in .remove()
hwmon: (acpi_power_meter) Use acpi_bus_get_acpi_device()
hwmon: (dell-smm) Add support for fanX_min, fanX_max and fanX_target
dt-bindings: hwmon: allow specifying channels for tmp421
hwmon: (tmp421) ignore non-channel related DT nodes
hwmon: (tmp421) update documentation
hwmon: (tmp421) support HWMON_T_ENABLE
...
123 files changed, 2895 insertions, 954 deletions
diff --git a/Documentation/devicetree/bindings/hwmon/dps650ab.txt b/Documentation/devicetree/bindings/hwmon/dps650ab.txt deleted file mode 100644 index 76780e79589965..00000000000000 --- a/Documentation/devicetree/bindings/hwmon/dps650ab.txt +++ /dev/null @@ -1,11 +0,0 @@ -Bindings for Delta Electronics DPS-650-AB power supply - -Required properties: -- compatible : "delta,dps650ab" -- reg : I2C address, one of 0x58, 0x59. - -Example: - dps650ab@58 { - compatible = "delta,dps650ab"; - reg = <0x58>; - }; diff --git a/Documentation/devicetree/bindings/hwmon/hih6130.txt b/Documentation/devicetree/bindings/hwmon/hih6130.txt deleted file mode 100644 index 2c43837af4c232..00000000000000 --- a/Documentation/devicetree/bindings/hwmon/hih6130.txt +++ /dev/null @@ -1,12 +0,0 @@ -Honeywell Humidicon HIH-6130 humidity/temperature sensor --------------------------------------------------------- - -Requires node properties: -- compatible : "honeywell,hi6130" -- reg : the I2C address of the device. This is 0x27. - -Example: - hih6130@27 { - compatible = "honeywell,hih6130"; - reg = <0x27>; - }; diff --git a/Documentation/devicetree/bindings/hwmon/ibm,cffps1.txt b/Documentation/devicetree/bindings/hwmon/ibm,cffps1.txt deleted file mode 100644 index d9a2719f924303..00000000000000 --- a/Documentation/devicetree/bindings/hwmon/ibm,cffps1.txt +++ /dev/null @@ -1,26 +0,0 @@ -Device-tree bindings for IBM Common Form Factor Power Supply Versions 1 and 2 ------------------------------------------------------------------------------ - -Required properties: - - compatible : Must be one of the following: - "ibm,cffps1" - "ibm,cffps2" - or "ibm,cffps" if the system - must support any version of the - power supply - - reg = < I2C bus address >; : Address of the power supply on the - I2C bus. - -Example: - - i2c-bus@100 { - #address-cells = <1>; - #size-cells = <0>; - #interrupt-cells = <1>; - < more properties > - - power-supply@68 { - compatible = "ibm,cffps1"; - reg = <0x68>; - }; - }; diff --git a/Documentation/devicetree/bindings/hwmon/iio-hwmon.yaml b/Documentation/devicetree/bindings/hwmon/iio-hwmon.yaml new file mode 100644 index 00000000000000..f5a6cc3efd3324 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/iio-hwmon.yaml @@ -0,0 +1,37 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/hwmon/iio-hwmon.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: ADC-attached Hardware Sensor Device Tree Bindings + +maintainers: + - Jonathan Cameron <jic23@kernel.org> + +description: > + Bindings for hardware monitoring devices connected to ADC controllers + supporting the Industrial I/O bindings. + +properties: + compatible: + const: iio-hwmon + + io-channels: + minItems: 1 + maxItems: 8 # Should be enough + description: > + List of phandles to ADC channels to read the monitoring values + +required: + - compatible + - io-channels + +additionalProperties: false + +examples: + - | + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 1>, <&adc 2>; + }; diff --git a/Documentation/devicetree/bindings/hwmon/jc42.txt b/Documentation/devicetree/bindings/hwmon/jc42.txt deleted file mode 100644 index f569db58f64a10..00000000000000 --- a/Documentation/devicetree/bindings/hwmon/jc42.txt +++ /dev/null @@ -1,46 +0,0 @@ -Properties for Jedec JC-42.4 compatible temperature sensors - -Required properties: -- compatible: May include a device-specific string consisting of the - manufacturer and the name of the chip. A list of supported - chip names follows. - Must include "jedec,jc-42.4-temp" for any Jedec JC-42.4 - compatible temperature sensor. - - Supported chip names: - adi,adt7408 - atmel,at30ts00 - atmel,at30tse004 - onnn,cat6095 - onnn,cat34ts02 - maxim,max6604 - microchip,mcp9804 - microchip,mcp9805 - microchip,mcp9808 - microchip,mcp98243 - microchip,mcp98244 - microchip,mcp9843 - nxp,se97 - nxp,se98 - st,stts2002 - st,stts2004 - st,stts3000 - st,stts424 - st,stts424e - idt,tse2002 - idt,tse2004 - idt,ts3000 - idt,ts3001 - -- reg: I2C address - -Optional properties: -- smbus-timeout-disable: When set, the smbus timeout function will be disabled. - This is not supported on all chips. - -Example: - -temp-sensor@1a { - compatible = "jedec,jc-42.4-temp"; - reg = <0x1a>; -}; diff --git a/Documentation/devicetree/bindings/hwmon/jedec,jc42.yaml b/Documentation/devicetree/bindings/hwmon/jedec,jc42.yaml new file mode 100644 index 00000000000000..0e49b390116155 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/jedec,jc42.yaml @@ -0,0 +1,78 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/jedec,jc42.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Jedec JC-42.4 compatible temperature sensors + +maintainers: + - Jean Delvare <jdelvare@suse.com> + - Guenter Roeck <linux@roeck-us.net> + +select: + properties: + compatible: + const: jedec,jc-42.4-temp + + required: + - compatible + +properties: + compatible: + oneOf: + - const: jedec,jc-42.4-temp + - items: + - enum: + - adi,adt7408 + - atmel,at30ts00 + - atmel,at30tse004 + - idt,tse2002 + - idt,tse2004 + - idt,ts3000 + - idt,ts3001 + - maxim,max6604 + - microchip,mcp9804 + - microchip,mcp9805 + - microchip,mcp9808 + - microchip,mcp98243 + - microchip,mcp98244 + - microchip,mcp9843 + - nxp,se97 + - nxp,se97b + - nxp,se98 + - onnn,cat6095 + - onnn,cat34ts02 + - st,stts2002 + - st,stts2004 + - st,stts3000 + - st,stts424 + - st,stts424e + - const: jedec,jc-42.4-temp + + reg: + maxItems: 1 + + smbus-timeout-disable: + description: | + When set, the smbus timeout function will be disabled. This is not + supported on all chips. + type: boolean + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + temp-sensor@1a { + compatible = "jedec,jc-42.4-temp"; + reg = <0x1a>; + }; + }; diff --git a/Documentation/devicetree/bindings/hwmon/lltc,ltc4151.yaml b/Documentation/devicetree/bindings/hwmon/lltc,ltc4151.yaml new file mode 100644 index 00000000000000..4b5851c326f7a5 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/lltc,ltc4151.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/lltc,ltc4151.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LTC4151 High Voltage I2C Current and Voltage Monitor + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + +properties: + compatible: + const: lltc,ltc4151 + + reg: + maxItems: 1 + + shunt-resistor-micro-ohms: + description: + Shunt resistor value in micro-Ohms + default: 1000 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + sensor@6e { + compatible = "lltc,ltc4151"; + reg = <0x6e>; + shunt-resistor-micro-ohms = <1500>; + }; + }; diff --git a/Documentation/devicetree/bindings/hwmon/lm70.txt b/Documentation/devicetree/bindings/hwmon/lm70.txt deleted file mode 100644 index ea417a0d32af52..00000000000000 --- a/Documentation/devicetree/bindings/hwmon/lm70.txt +++ /dev/null @@ -1,22 +0,0 @@ -* LM70/TMP121/LM71/LM74 thermometer. - -Required properties: -- compatible: one of - "ti,lm70" - "ti,tmp121" - "ti,tmp122" - "ti,lm71" - "ti,lm74" - -See Documentation/devicetree/bindings/spi/spi-bus.txt for more required and -optional properties. - -Example: - -spi_master { - temperature-sensor@0 { - compatible = "ti,lm70"; - reg = <0>; - spi-max-frequency = <1000000>; - }; -}; diff --git a/Documentation/devicetree/bindings/hwmon/lm90.txt b/Documentation/devicetree/bindings/hwmon/lm90.txt deleted file mode 100644 index 398dcb9657514e..00000000000000 --- a/Documentation/devicetree/bindings/hwmon/lm90.txt +++ /dev/null @@ -1,51 +0,0 @@ -* LM90 series thermometer. - -Required node properties: -- compatible: manufacturer and chip name, one of - "adi,adm1032" - "adi,adt7461" - "adi,adt7461a" - "gmt,g781" - "national,lm90" - "national,lm86" - "national,lm89" - "national,lm99" - "dallas,max6646" - "dallas,max6647" - "dallas,max6649" - "dallas,max6657" - "dallas,max6658" - "dallas,max6659" - "dallas,max6680" - "dallas,max6681" - "dallas,max6695" - "dallas,max6696" - "onnn,nct1008" - "winbond,w83l771" - "nxp,sa56004" - "ti,tmp451" - -- reg: I2C bus address of the device - -- vcc-supply: vcc regulator for the supply voltage. - -Optional properties: -- interrupts: Contains a single interrupt specifier which describes the - LM90 "-ALERT" pin output. - See interrupt-controller/interrupts.txt for the format. - -- #thermal-sensor-cells: should be set to 1. See thermal/thermal-sensor.yaml - for details. See <include/dt-bindings/thermal/lm90.h> for the - definition of the local, remote and 2nd remote sensor index - constants. - -Example LM90 node: - -temp-sensor { - compatible = "onnn,nct1008"; - reg = <0x4c>; - vcc-supply = <&palmas_ldo6_reg>; - interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_LOW>; - #thermal-sensor-cells = <1>; -} diff --git a/Documentation/devicetree/bindings/hwmon/ltc4151.txt b/Documentation/devicetree/bindings/hwmon/ltc4151.txt deleted file mode 100644 index d008a5ef525a7d..00000000000000 --- a/Documentation/devicetree/bindings/hwmon/ltc4151.txt +++ /dev/null @@ -1,18 +0,0 @@ -LTC4151 High Voltage I2C Current and Voltage Monitor - -Required properties: -- compatible: Must be "lltc,ltc4151" -- reg: I2C address - -Optional properties: -- shunt-resistor-micro-ohms - Shunt resistor value in micro-Ohms - Defaults to <1000> if unset. - -Example: - -ltc4151@6e { - compatible = "lltc,ltc4151"; - reg = <0x6e>; - shunt-resistor-micro-ohms = <1500>; -}; diff --git a/Documentation/devicetree/bindings/hwmon/mcp3021.txt b/Documentation/devicetree/bindings/hwmon/mcp3021.txt deleted file mode 100644 index 294318ba691454..00000000000000 --- a/Documentation/devicetree/bindings/hwmon/mcp3021.txt +++ /dev/null @@ -1,21 +0,0 @@ -mcp3021 properties - -Required properties: -- compatible: Must be one of the following: - - "microchip,mcp3021" for mcp3021 - - "microchip,mcp3221" for mcp3221 -- reg: I2C address - -Optional properties: - -- reference-voltage-microvolt - Reference voltage in microvolt (uV) - -Example: - -mcp3021@4d { - compatible = "microchip,mcp3021"; - reg = <0x4d>; - - reference-voltage-microvolt = <4500000>; /* 4.5 V */ -}; diff --git a/Documentation/devicetree/bindings/hwmon/microchip,mcp3021.yaml b/Documentation/devicetree/bindings/hwmon/microchip,mcp3021.yaml new file mode 100644 index 00000000000000..c42051f8a1914f --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/microchip,mcp3021.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/microchip,mcp3021.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip MCP3021 A/D converter + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + +properties: + compatible: + enum: + - microchip,mcp3021 + - microchip,mcp3221 + + reg: + maxItems: 1 + + reference-voltage-microvolt: + description: + VDD supply power and reference voltage + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + adc@4d { + compatible = "microchip,mcp3021"; + reg = <0x4d>; + + reference-voltage-microvolt = <4500000>; /* 4.5 V */ + }; + }; diff --git a/Documentation/devicetree/bindings/hwmon/national,lm90.yaml b/Documentation/devicetree/bindings/hwmon/national,lm90.yaml new file mode 100644 index 00000000000000..6e1d54ff5d5b65 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/national,lm90.yaml @@ -0,0 +1,78 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/national,lm90.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LM90 series thermometer + +maintainers: + - Jean Delvare <jdelvare@suse.com> + - Guenter Roeck <linux@roeck-us.net> + +properties: + compatible: + enum: + - adi,adm1032 + - adi,adt7461 + - adi,adt7461a + - dallas,max6646 + - dallas,max6647 + - dallas,max6649 + - dallas,max6657 + - dallas,max6658 + - dallas,max6659 + - dallas,max6680 + - dallas,max6681 + - dallas,max6695 + - dallas,max6696 + - gmt,g781 + - national,lm86 + - national,lm89 + - national,lm90 + - national,lm99 + - nxp,sa56004 + - onnn,nct1008 + - ti,tmp451 + - winbond,w83l771 + + + interrupts: + items: + - description: | + Single interrupt specifier which describes the LM90 "-ALERT" pin + output. + + reg: + maxItems: 1 + + "#thermal-sensor-cells": + const: 1 + + vcc-supply: + description: phandle to the regulator that provides the +VCC supply + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/tegra-gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + sensor@4c { + compatible = "onnn,nct1008"; + reg = <0x4c>; + vcc-supply = <&palmas_ldo6_reg>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_LOW>; + #thermal-sensor-cells = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/hwmon/ntc-thermistor.yaml b/Documentation/devicetree/bindings/hwmon/ntc-thermistor.yaml new file mode 100644 index 00000000000000..9e77cee07dbc4f --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/ntc-thermistor.yaml @@ -0,0 +1,141 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +--- +$id: http://devicetree.org/schemas/hwmon/ntc-thermistor.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NTC thermistor temperature sensors + +maintainers: + - Naveen Krishna Chatradhi <ch.naveen@samsung.com> + - Linus Walleij <linus.walleij@linaro.org> + +description: | + Thermistors with negative temperature coefficient (NTC) are resistors that + vary in resistance in an often non-linear way in relation to temperature. + The negative temperature coefficient means that the resistance decreases + as the temperature rises. Since the relationship between resistance and + temperature is non-linear, software drivers most often need to use a look + up table and interpolation to get from resistance to temperature. + + When used in practice, a thermistor is often connected between ground, a + pull-up resistor or/and a pull-down resistor and a fixed voltage like this: + + + e.g. 5V = pull-up voltage (puv) + | + +-+ + | | + | | Pull-up resistor + | | (puo) + +-+ + |-------------------------o + +-+ | ^ + | |/ | + | / | + |/| Thermistor | Measured voltage (mv) + / | | "connected ground" + /| | | + +-+ | + |-------------------------o + +-+ ^ + | | | + | | Pull-down resistor | Measured voltage (mv) + | | (pdo) | "connected positive" + +-+ | + | | + | v + + GND GND + + The arrangements of where we measure the voltage over the thermistor are + called "connected ground" and "connected positive" and shall be understood as + the cases when either pull-up or pull-down resistance is zero. + + If the pull-up resistance is 0 one end of the thermistor is connected to the + positive voltage and we get the thermistor on top of a pull-down resistor + and we take the measure between the thermistor and the pull-down resistor. + + Conversely if the pull-down resistance is zero, one end of the thermistor is + connected to ground and we get the thermistor under the pull-up resistor + and we take the measure between the pull-up resistor and the thermistor. + + We can use both pull-up and pull-down resistors at the same time, and then + the figure illustrates where the voltage will be measured for the "connected + ground" and "connected positive" cases. + +properties: + $nodename: + pattern: "^thermistor(.*)?$" + + compatible: + oneOf: + - const: epcos,b57330v2103 + - const: epcos,b57891s0103 + - const: murata,ncp15wb473 + - const: murata,ncp18wb473 + - const: murata,ncp21wb473 + - const: murata,ncp03wb473 + - const: murata,ncp15wl333 + - const: murata,ncp03wf104 + - const: murata,ncp15xh103 + # Deprecated "ntp," compatible strings + - const: ntc,ncp15wb473 + deprecated: true + - const: ntc,ncp18wb473 + deprecated: true + - const: ntc,ncp21wb473 + deprecated: true + - const: ntc,ncp03wb473 + deprecated: true + - const: ntc,ncp15wl333 + deprecated: true + + "#thermal-sensor-cells": + description: Thermal sensor cells if used for thermal sensoring. + const: 0 + + pullup-uv: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Pull-up voltage in micro volts. Must always be specified. + + pullup-ohm: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Pull-up resistance in ohms. Must always be specified, even + if zero. + + pulldown-ohm: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Pull-down resistance in ohms. Must always be specified, even + if zero. + + connected-positive: + $ref: /schemas/types.yaml#/definitions/flag + description: Indicates how the thermistor is connected in series with + a pull-up and/or a pull-down resistor. See the description above for + an illustration. If this flag is NOT specified, the thermistor is assumed + to be connected-ground, which usually means a pull-down resistance of + zero but complex arrangements are possible. + + # See /schemas/iio/adc/adc.yaml + io-channels: + maxItems: 1 + description: IIO ADC channel to read the voltage over the resistor. Must + always be specified. + +required: + - compatible + - pullup-uv + - pullup-ohm + - pulldown-ohm + - io-channels + +additionalProperties: false + +examples: + - | + thermistor0 { + compatible = "murata,ncp18wb473"; + io-channels = <&gpadc 0x06>; + pullup-uv = <1800000>; + pullup-ohm = <220000>; + pulldown-ohm = <0>; + #thermal-sensor-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt b/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt deleted file mode 100644 index 4c5c3712970e5c..00000000000000 --- a/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt +++ /dev/null @@ -1,44 +0,0 @@ -NTC Thermistor hwmon sensors -------------------------------- - -Requires node properties: -- "compatible" value : one of - "epcos,b57330v2103" - "epcos,b57891s0103" - "murata,ncp15wb473" - "murata,ncp18wb473" - "murata,ncp21wb473" - "murata,ncp03wb473" - "murata,ncp15wl333" - "murata,ncp03wf104" - "murata,ncp15xh103" - -/* Usage of vendor name "ntc" is deprecated */ -<DEPRECATED> "ntc,ncp15wb473" -<DEPRECATED> "ntc,ncp18wb473" -<DEPRECATED> "ntc,ncp21wb473" -<DEPRECATED> "ntc,ncp03wb473" -<DEPRECATED> "ntc,ncp15wl333" - -- "pullup-uv" Pull up voltage in micro volts -- "pullup-ohm" Pull up resistor value in ohms -- "pulldown-ohm" Pull down resistor value in ohms -- "connected-positive" Always ON, If not specified. - Status change is possible. -- "io-channels" Channel node of ADC to be used for - conversion. - -Optional node properties: -- "#thermal-sensor-cells" Used to expose itself to thermal fw. - -Read more about iio bindings at - https://github.com/devicetree-org/dt-schema/blob/master/schemas/iio/ - -Example: - ncp15wb473@0 { - compatible = "murata,ncp15wb473"; - pullup-uv = <1800000>; - pullup-ohm = <47000>; - pulldown-ohm = <0>; - io-channels = <&adc 3>; - }; diff --git a/Documentation/devicetree/bindings/hwmon/nuvoton,nct7802.yaml b/Documentation/devicetree/bindings/hwmon/nuvoton,nct7802.yaml new file mode 100644 index 00000000000000..2f0620ecccc977 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/nuvoton,nct7802.yaml @@ -0,0 +1,145 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- + +$id: http://devicetree.org/schemas/hwmon/nuvoton,nct7802.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Nuvoton NCT7802Y Hardware Monitoring IC + +maintainers: + - Guenter Roeck <linux@roeck-us.net> + +description: | + The NCT7802Y is a hardware monitor IC which supports one on-die and up to + 5 remote temperature sensors with SMBus interface. + + Datasheets: + https://www.nuvoton.com/export/resource-files/Nuvoton_NCT7802Y_Datasheet_V12.pdf + +additionalProperties: false + +properties: + compatible: + enum: + - nuvoton,nct7802 + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "^channel@[0-3]$": + type: object + + additionalProperties: false + + properties: + reg: + items: + - enum: + - 0 # Local Temperature Sensor ("LTD") + - 1 # Remote Temperature Sensor or Voltage Sensor 1 ("RTD1") + - 2 # Remote Temperature Sensor or Voltage Sensor 2 ("RTD2") + - 3 # Remote Temperature Sensor or Voltage Sensor 3 ("RTD3") + + sensor-type: + items: + - enum: + - temperature + - voltage + + temperature-mode: + items: + - enum: + - thermistor + - thermal-diode + + required: + - reg + + allOf: + # For channels RTD1, RTD2 and RTD3, require sensor-type to be set. + # Otherwise (for all other channels), do not allow temperature-mode to be + # set. + - if: + properties: + reg: + items: + - enum: + - 1 + - 2 + - 3 + then: + required: + - sensor-type + else: + not: + required: + - sensor-type + + # For channels RTD1 and RTD2 and if sensor-type is "temperature", require + # temperature-mode to be set. Otherwise (for all other channels or + # sensor-type settings), do not allow temperature-mode to be set + - if: + properties: + reg: + items: + - enum: + - 1 + - 2 + sensor-type: + items: + - enum: + - temperature + then: + required: + - temperature-mode + else: + not: + required: + - temperature-mode + +required: + - compatible + - reg + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + nct7802@28 { + compatible = "nuvoton,nct7802"; + reg = <0x28>; + + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { /* LTD */ + reg = <0>; + }; + + channel@1 { /* RTD1 */ + reg = <1>; + sensor-type = "voltage"; + }; + + channel@2 { /* RTD2 */ + reg = <2>; + sensor-type = "temperature"; + temperature-mode = "thermal-diode"; + }; + + channel@3 { /* RTD3 */ + reg = <3>; + sensor-type = "temperature"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/hwmon/pmbus/ti,lm25066.yaml b/Documentation/devicetree/bindings/hwmon/pmbus/ti,lm25066.yaml new file mode 100644 index 00000000000000..da8292bc32f517 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/pmbus/ti,lm25066.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- + +$id: http://devicetree.org/schemas/hwmon/pmbus/ti,lm25066.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: National Semiconductor/Texas Instruments LM250x6/LM506x power-management ICs + +maintainers: + - Zev Weiss <zev@bewilderbeest.net> + +description: | + The LM25066 family of power-management ICs (a.k.a. hot-swap + controllers or eFuses in various contexts) are PMBus devices that + offer temperature, current, voltage, and power monitoring. + + Datasheet: https://www.ti.com/lit/ds/symlink/lm25066.pdf + +properties: + compatible: + enum: + - ti,lm25056 + - ti,lm25066 + - ti,lm5064 + - ti,lm5066 + - ti,lm5066i + + reg: + maxItems: 1 + + shunt-resistor-micro-ohms: + description: + Shunt (sense) resistor value in micro-Ohms + default: 1000 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@40 { + compatible = "ti,lm25066"; + reg = <0x40>; + shunt-resistor-micro-ohms = <675>; + }; + }; diff --git a/Documentation/devicetree/bindings/hwmon/sensirion,sht15.yaml b/Documentation/devicetree/bindings/hwmon/sensirion,sht15.yaml new file mode 100644 index 00000000000000..4669217d01e163 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/sensirion,sht15.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/sensirion,sht15.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sensirion SHT15 humidity and temperature sensor + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + +properties: + compatible: + const: sensirion,sht15 + + clk-gpios: + maxItems: 1 + + data-gpios: + maxItems: 1 + + vcc-supply: + description: regulator that drives the VCC pin + +required: + - compatible + - clk-gpios + - data-gpios + - vcc-supply + +additionalProperties: false + +examples: + - | + sensor { + compatible = "sensirion,sht15"; + clk-gpios = <&gpio4 12 0>; + data-gpios = <&gpio4 13 0>; + vcc-supply = <®_sht15>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sensor>; + }; diff --git a/Documentation/devicetree/bindings/hwmon/sht15.txt b/Documentation/devicetree/bindings/hwmon/sht15.txt deleted file mode 100644 index 6a80277cc42691..00000000000000 --- a/Documentation/devicetree/bindings/hwmon/sht15.txt +++ /dev/null @@ -1,19 +0,0 @@ -Sensirion SHT15 Humidity and Temperature Sensor - -Required properties: - - - "compatible": must be "sensirion,sht15". - - "data-gpios": GPIO connected to the data line. - - "clk-gpios": GPIO connected to the clock line. - - "vcc-supply": regulator that drives the VCC pin. - -Example: - - sensor { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_sensor>; - compatible = "sensirion,sht15"; - clk-gpios = <&gpio4 12 0>; - data-gpios = <&gpio4 13 0>; - vcc-supply = <®_sht15>; - }; diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp102.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp102.yaml new file mode 100644 index 00000000000000..d3eff4fac1075e --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/ti,tmp102.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/ti,tmp102.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TMP102 temperature sensor + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + +properties: + compatible: + enum: + - ti,tmp102 + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + + "#thermal-sensor-cells": + const: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + sensor@48 { + compatible = "ti,tmp102"; + reg = <0x48>; + interrupt-parent = <&gpio7>; + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; + #thermal-sensor-cells = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp108.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp108.yaml new file mode 100644 index 00000000000000..eda55bbc172dcb --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/ti,tmp108.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/ti,tmp108.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TMP108 temperature sensor + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + +properties: + compatible: + enum: + - ti,tmp108 + + interrupts: + items: + - description: alert interrupt + + reg: + maxItems: 1 + + "#thermal-sensor-cells": + const: 0 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + sensor@48 { + compatible = "ti,tmp108"; + reg = <0x48>; + interrupt-parent = <&gpio1>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&tmp_alrt>; + #thermal-sensor-cells = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp421.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp421.yaml new file mode 100644 index 00000000000000..36f649938fb7ef --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/ti,tmp421.yaml @@ -0,0 +1,110 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/ti,tmp421.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TMP42x/TMP44x temperature sensor + +maintainers: + - Guenter Roeck <linux@roeck-us.net> + +description: | + ±1°C Remote and Local temperature sensor + https://www.ti.com/lit/ds/symlink/tmp422.pdf + +properties: + compatible: + enum: + - ti,tmp421 + - ti,tmp422 + - ti,tmp423 + - ti,tmp441 + - ti,tmp442 + reg: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +required: + - compatible + - reg + +additionalProperties: false + +patternProperties: + "^channel@([0-3])$": + type: object + description: | + Represents channels of the device and their specific configuration. + + properties: + reg: + description: | + The channel number. 0 is local channel, 1-3 are remote channels + items: + minimum: 0 + maximum: 3 + + label: + description: | + A descriptive name for this channel, like "ambient" or "psu". + + ti,n-factor: + description: | + The value (two's complement) to be programmed in the channel specific N correction register. + For remote channels only. + $ref: /schemas/types.yaml#/definitions/uint32 + items: + minimum: 0 + maximum: 255 + + required: + - reg + + additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + sensor@4c { + compatible = "ti,tmp422"; + reg = <0x4c>; + }; + }; + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + sensor@4c { + compatible = "ti,tmp422"; + reg = <0x4c>; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0x0>; + ti,n-factor = <0x1>; + label = "local"; + }; + + channel@1 { + reg = <0x1>; + ti,n-factor = <0x0>; + label = "somelabel"; + }; + + channel@2 { + reg = <0x2>; + status = "disabled"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/hwmon/tmp108.txt b/Documentation/devicetree/bindings/hwmon/tmp108.txt deleted file mode 100644 index 54d4beed4ee574..00000000000000 --- a/Documentation/devicetree/bindings/hwmon/tmp108.txt +++ /dev/null @@ -1,18 +0,0 @@ -TMP108 temperature sensor -------------------------- - -This device supports I2C only. - -Requires node properties: -- compatible : "ti,tmp108" -- reg : the I2C address of the device. This is 0x48, 0x49, 0x4a, or 0x4b. - -Optional properties: -- interrupts: Reference to the TMP108 alert interrupt. -- #thermal-sensor-cells: should be set to 0. - -Example: - tmp108@48 { - compatible = "ti,tmp108"; - reg = <0x48>; - }; diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml index 1e4b3464d73405..791079021f1b9a 100644 --- a/Documentation/devicetree/bindings/trivial-devices.yaml +++ b/Documentation/devicetree/bindings/trivial-devices.yaml @@ -41,10 +41,6 @@ properties: - adi,adp5585-02 # Analog Devices ADP5589 Keypad Decoder and I/O Expansion - adi,adp5589 - # +/-1C TDM Extended Temp Range I.C - - adi,adt7461 - # +/-1C TDM Extended Temp Range I.C - - adt7461 # AMS iAQ-Core VOC Sensor - ams,iaq-core # i2c serial eeprom (24cxx) @@ -77,6 +73,8 @@ properties: - dallas,ds4510 # Digital Thermometer and Thermostat - dallas,ds75 + # Delta Electronics DPS-650-AB power supply + - delta,dps650ab # Delta Electronics DPS920AB 920W 54V Power Supply - delta,dps920ab # 1/4 Brick DC/DC Regulated Power Module @@ -113,8 +111,14 @@ properties: - mps,mp2888 # Monolithic Power Systems Inc. multi-phase controller mp2975 - mps,mp2975 - # G751: Digital Temperature Sensor and Thermal Watchdog with Two-Wire Interface - - gmt,g751 + # Honeywell Humidicon HIH-6130 humidity/temperature sensor + - honeywell,hi6130 + # IBM Common Form Factor Power Supply Versions (all versions) + - ibm,cffps + # IBM Common Form Factor Power Supply Versions 1 + - ibm,cffps1 + # IBM Common Form Factor Power Supply Versions 2 + - ibm,cffps2 # Infineon IR36021 digital POL buck controller - infineon,ir36021 # Infineon IR38064 Voltage Regulator @@ -307,16 +311,22 @@ properties: - ti,hdc1050 # Temperature and humidity sensor with i2c interface - ti,hdc1080 + # Thermometer with SPI interface + - ti,lm70 + - ti,lm71 # Temperature sensor with 2-wire interface - ti,lm73 + # Thermometer with SPI interface + - ti,lm74 # Temperature sensor with integrated fan control - ti,lm96000 # I2C Touch-Screen Controller - ti,tsc2003 # Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface - - ti,tmp102 - # Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface - ti,tmp103 + # Thermometer with SPI interface + - ti,tmp121 + - ti,tmp122 # Digital Temperature Sensor - ti,tmp275 # TI Dual channel DCAP+ multiphase controller TPS53676 with AVSBus diff --git a/Documentation/hwmon/dell-smm-hwmon.rst b/Documentation/hwmon/dell-smm-hwmon.rst index 3bf77a5df995c0..beec8849117154 100644 --- a/Documentation/hwmon/dell-smm-hwmon.rst +++ b/Documentation/hwmon/dell-smm-hwmon.rst @@ -34,6 +34,9 @@ Name Perm Description =============================== ======= ======================================= fan[1-3]_input RO Fan speed in RPM. fan[1-3]_label RO Fan label. +fan[1-3]_min RO Minimal Fan speed in RPM +fan[1-3]_max RO Maximal Fan speed in RPM +fan[1-3]_target RO Expected Fan speed in RPM pwm[1-3] RW Control the fan PWM duty-cycle. pwm1_enable WO Enable or disable automatic BIOS fan control (not supported on all laptops, diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst index f790f1260c33af..7046bf1870d969 100644 --- a/Documentation/hwmon/index.rst +++ b/Documentation/hwmon/index.rst @@ -130,6 +130,7 @@ Hardware Monitoring Kernel Drivers max31785 max31790 max34440 + max6620 max6639 max6642 max6650 diff --git a/Documentation/hwmon/lm25066.rst b/Documentation/hwmon/lm25066.rst index 9f1d7e4d3ca14b..a2098eb2409048 100644 --- a/Documentation/hwmon/lm25066.rst +++ b/Documentation/hwmon/lm25066.rst @@ -79,6 +79,8 @@ This driver does not auto-detect devices. You will have to instantiate the devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for details. +The shunt (sense) resistor value can be configured by a device tree property; +see Documentation/devicetree/bindings/hwmon/pmbus/ti,lm25066.yaml for details. Platform data support --------------------- diff --git a/Documentation/hwmon/lm90.rst b/Documentation/hwmon/lm90.rst index 3da8c6e06a365d..05391fb4042d96 100644 --- a/Documentation/hwmon/lm90.rst +++ b/Documentation/hwmon/lm90.rst @@ -265,6 +265,16 @@ Supported chips: https://www.ti.com/litv/pdf/sbos686 + * Texas Instruments TMP461 + + Prefix: 'tmp461' + + Addresses scanned: I2C 0x48 through 0x4F + + Datasheet: Publicly available at TI website + + https://www.ti.com/lit/gpn/tmp461 + Author: Jean Delvare <jdelvare@suse.de> diff --git a/Documentation/hwmon/max6620.rst b/Documentation/hwmon/max6620.rst new file mode 100644 index 00000000000000..84c1c44d3de4de --- /dev/null +++ b/Documentation/hwmon/max6620.rst @@ -0,0 +1,46 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +Kernel driver max6620 +===================== + +Supported chips: + + Maxim MAX6620 + + Prefix: 'max6620' + + Addresses scanned: none + + Datasheet: http://pdfserv.maxim-ic.com/en/ds/MAX6620.pdf + +Authors: + - L\. Grunenberg <contact@lgrunenberg.de> + - Cumulus Networks <support@cumulusnetworks.com> + - Shuotian Cheng <shuche@microsoft.com> + - Arun Saravanan Balachandran <Arun_Saravanan_Balac@dell.com> + +Description +----------- + +This driver implements support for Maxim MAX6620 fan controller. + +The driver configures the fan controller in RPM mode. To give the readings more +range or accuracy, the desired value can be set by a programmable register +(1, 2, 4, 8, 16 or 32). Set higher values for larger speeds. + +The driver provides the following sensor access in sysfs: + +================ ======= ===================================================== +fan[1-4]_alarm ro Fan alarm. +fan[1-4]_div rw Sets the nominal RPM range of the fan. Valid values + are 1, 2, 4, 8, 16 and 32. +fan[1-4]_input ro Fan speed in RPM. +fan[1-4]_target rw Desired fan speed in RPM. +================ ======= ===================================================== + +Usage notes +----------- + +This driver does not auto-detect devices. You will have to instantiate the +devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for +details. diff --git a/Documentation/hwmon/tmp401.rst b/Documentation/hwmon/tmp401.rst index 14bf1fbf449348..3aacf3d3bdf338 100644 --- a/Documentation/hwmon/tmp401.rst +++ b/Documentation/hwmon/tmp401.rst @@ -43,12 +43,6 @@ Supported chips: Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp435.html - * Texas Instruments TMP461 - - Prefix: 'tmp461' - - Datasheet: https://www.ti.com/product/tmp461 - Authors: @@ -60,7 +54,7 @@ Description ----------- This driver implements support for Texas Instruments TMP401, TMP411, -TMP431, TMP432, TMP435, and TMP461 chips. These chips implement one or two +TMP431, TMP432, and TMP435 chips. These chips implement one or two remote and one local temperature sensors. Temperature is measured in degrees Celsius. Resolution of the remote sensor is 0.0625 degree. Local sensor resolution can be set to 0.5, 0.25, 0.125 or 0.0625 degree (not @@ -84,10 +78,3 @@ some additional features. TMP432 is compatible with TMP401 and TMP431. It supports two external temperature sensors. - -TMP461 is compatible with TMP401. It supports offset correction -that is applied to the remote sensor. - -* Sensor offset values are temperature values - - Exported via sysfs attribute tempX_offset diff --git a/Documentation/hwmon/tmp421.rst b/Documentation/hwmon/tmp421.rst index ddcd5159c75d1d..a3002117bbd7bd 100644 --- a/Documentation/hwmon/tmp421.rst +++ b/Documentation/hwmon/tmp421.rst @@ -64,3 +64,13 @@ the temperature values via the following sysfs files: **temp[1-4]_input** **temp[2-4]_fault** + +Each sensor can be individually disabled via Devicetree or from sysfs +via: + +**temp[1-4]_enable** + +If labels were specified in Devicetree, additional sysfs files will +be present: + +**temp[1-4]_label** diff --git a/MAINTAINERS b/MAINTAINERS index 5c1fd050b69c6d..0b4f251e34e10e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -10038,6 +10038,7 @@ JC42.4 TEMPERATURE SENSOR DRIVER M: Guenter Roeck <linux@roeck-us.net> L: linux-hwmon@vger.kernel.org S: Maintained +F: Documentation/devicetree/bindings/hwmon/jedec,jc42.yaml F: Documentation/hwmon/jc42.rst F: drivers/hwmon/jc42.c @@ -10932,7 +10933,7 @@ LM90 HARDWARE MONITOR DRIVER M: Jean Delvare <jdelvare@suse.com> L: linux-hwmon@vger.kernel.org S: Maintained -F: Documentation/devicetree/bindings/hwmon/lm90.txt +F: Documentation/devicetree/bindings/hwmon/national,lm90.yaml F: Documentation/hwmon/lm90.rst F: drivers/hwmon/lm90.c F: include/dt-bindings/thermal/lm90.h @@ -14966,7 +14967,6 @@ S: Maintained W: http://hwmon.wiki.kernel.org/ W: http://www.roeck-us.net/linux/drivers/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git -F: Documentation/devicetree/bindings/hwmon/ibm,cffps1.txt F: Documentation/devicetree/bindings/hwmon/ltc2978.txt F: Documentation/devicetree/bindings/hwmon/max31785.txt F: Documentation/hwmon/adm1275.rst diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 5b54c80b9d32a4..f456ba7c106004 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -608,6 +608,7 @@ struct acpi_device *acpi_bus_get_acpi_device(acpi_handle handle) { return handle_to_device(handle, get_acpi_device); } +EXPORT_SYMBOL_GPL(acpi_bus_get_acpi_device); static struct acpi_device_bus_id *acpi_device_bus_id_match(const char *dev_id) { diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index c4578e8f34bb55..64bd3dfba2c4fe 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -1032,6 +1032,16 @@ config SENSORS_MAX31730 This driver can also be built as a module. If so, the module will be called max31730. +config SENSORS_MAX6620 + tristate "Maxim MAX6620 fan controller" + depends on I2C + help + If you say yes here you get support for the MAX6620 + fan controller. + + This driver can also be built as a module. If so, the module + will be called max6620. + config SENSORS_MAX6621 tristate "Maxim MAX6621 sensor chip" depends on I2C @@ -1317,7 +1327,7 @@ config SENSORS_LM90 Maxim MAX6646, MAX6647, MAX6648, MAX6649, MAX6654, MAX6657, MAX6658, MAX6659, MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, ON Semiconductor NCT1008, Winbond/Nuvoton W83L771W/G/AWG/ASG, - Philips SA56004, GMT G781, and Texas Instruments TMP451 + Philips SA56004, GMT G781, Texas Instruments TMP451 and TMP461 sensor chips. This driver can also be built as a module. If so, the module @@ -1433,6 +1443,7 @@ config SENSORS_NCT6683 config SENSORS_NCT6775 tristate "Nuvoton NCT6775F and compatibles" depends on !PPC + depends on ACPI_WMI || ACPI_WMI=n select HWMON_VID help If you say yes here you get support for the hardware monitoring @@ -1930,7 +1941,7 @@ config SENSORS_TMP401 depends on I2C help If you say yes here you get support for Texas Instruments TMP401, - TMP411, TMP431, TMP432, TMP435, and TMP461 temperature sensor chips. + TMP411, TMP431, TMP432, and TMP435 temperature sensor chips. This driver can also be built as a module. If so, the module will be called tmp401. diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 16294027066169..baee6a8d4dd126 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -135,6 +135,7 @@ obj-$(CONFIG_SENSORS_MAX1668) += max1668.o obj-$(CONFIG_SENSORS_MAX197) += max197.o obj-$(CONFIG_SENSORS_MAX31722) += max31722.o obj-$(CONFIG_SENSORS_MAX31730) += max31730.o +obj-$(CONFIG_SENSORS_MAX6620) += max6620.o obj-$(CONFIG_SENSORS_MAX6621) += max6621.o obj-$(CONFIG_SENSORS_MAX6639) += max6639.o obj-$(CONFIG_SENSORS_MAX6642) += max6642.o diff --git a/drivers/hwmon/abituguru3.c b/drivers/hwmon/abituguru3.c index 112dd0d9377c76..8229ad30c9090d 100644 --- a/drivers/hwmon/abituguru3.c +++ b/drivers/hwmon/abituguru3.c @@ -145,7 +145,7 @@ struct abituguru3_data { struct device *hwmon_dev; /* hwmon registered device */ struct mutex update_lock; /* protect access to data and uGuru */ unsigned short addr; /* uguru base address */ - char valid; /* !=0 if following fields are valid */ + bool valid; /* true if following fields are valid */ unsigned long last_updated; /* In jiffies */ /* @@ -1083,7 +1083,7 @@ static struct abituguru3_data *abituguru3_update_device(struct device *dev) mutex_lock(&data->update_lock); if (!data->valid || time_after(jiffies, data->last_updated + HZ)) { /* Clear data->valid while updating */ - data->valid = 0; + data->valid = false; /* Read alarms */ if (abituguru3_read_increment_offset(data, ABIT_UGURU3_SETTINGS_BANK, @@ -1117,7 +1117,7 @@ static struct abituguru3_data *abituguru3_update_device(struct device *dev) goto LEAVE_UPDATE; } data->last_updated = jiffies; - data->valid = 1; + data->valid = true; } LEAVE_UPDATE: mutex_unlock(&data->update_lock); diff --git a/drivers/hwmon/acpi_power_meter.c b/drivers/hwmon/acpi_power_meter.c index 014505b1faf747..c405a5869581c9 100644 --- a/drivers/hwmon/acpi_power_meter.c +++ b/drivers/hwmon/acpi_power_meter.c @@ -535,7 +535,7 @@ static void remove_domain_devices(struct acpi_power_meter_resource *resource) sysfs_remove_link(resource->holders_dir, kobject_name(&obj->dev.kobj)); - put_device(&obj->dev); + acpi_dev_put(obj); } kfree(resource->domain_devices); @@ -597,18 +597,15 @@ static int read_domain_devices(struct acpi_power_meter_resource *resource) continue; /* Create a symlink to domain objects */ - resource->domain_devices[i] = NULL; - if (acpi_bus_get_device(element->reference.handle, - &resource->domain_devices[i])) + obj = acpi_bus_get_acpi_device(element->reference.handle); + resource->domain_devices[i] = obj; + if (!obj) continue; - obj = resource->domain_devices[i]; - get_device(&obj->dev); - res = sysfs_create_link(resource->holders_dir, &obj->dev.kobj, kobject_name(&obj->dev.kobj)); if (res) { - put_device(&obj->dev); + acpi_dev_put(obj); resource->domain_devices[i] = NULL; } } diff --git a/drivers/hwmon/ad7414.c b/drivers/hwmon/ad7414.c index 6a765755d06165..0afb89c4629db8 100644 --- a/drivers/hwmon/ad7414.c +++ b/drivers/hwmon/ad7414.c @@ -37,7 +37,7 @@ static u8 AD7414_REG_LIMIT[] = { AD7414_REG_T_HIGH, AD7414_REG_T_LOW }; struct ad7414_data { struct i2c_client *client; struct mutex lock; /* atomic read data updates */ - char valid; /* !=0 if following fields are valid */ + bool valid; /* true if following fields are valid */ unsigned long next_update; /* In jiffies */ s16 temp_input; /* Register values */ s8 temps[ARRAY_SIZE(AD7414_REG_LIMIT)]; @@ -95,7 +95,7 @@ static struct ad7414_data *ad7414_update_device(struct device *dev) } data->next_update = jiffies + HZ + HZ / 2; - data->valid = 1; + data->valid = true; } mutex_unlock(&data->lock); diff --git a/drivers/hwmon/ad7418.c b/drivers/hwmon/ad7418.c index d618f6b2f3820b..22bdb7e5b9e034 100644 --- a/drivers/hwmon/ad7418.c +++ b/drivers/hwmon/ad7418.c @@ -46,7 +46,7 @@ struct ad7418_data { enum chips type; struct mutex lock; int adc_max; /* number of ADC channels */ - char valid; + bool valid; unsigned long last_updated; /* In jiffies */ s16 temp[3]; /* Register values */ u16 in[4]; @@ -111,14 +111,14 @@ static int ad7418_update_device(struct device *dev) goto abort; data->last_updated = jiffies; - data->valid = 1; + data->valid = true; } mutex_unlock(&data->lock); return 0; abort: - data->valid = 0; + data->valid = false; mutex_unlock(&data->lock); return val; } diff --git a/drivers/hwmon/adm1021.c b/drivers/hwmon/adm1021.c index 71deb2cd20f558..38b447c6e8cdb1 100644 --- a/drivers/hwmon/adm1021.c +++ b/drivers/hwmon/adm1021.c @@ -72,7 +72,7 @@ struct adm1021_data { const struct attribute_group *groups[3]; struct mutex update_lock; - char valid; /* !=0 if following fields are valid */ + bool valid; /* true if following fields are valid */ char low_power; /* !=0 if device in low power mode */ unsigned long last_updated; /* In jiffies */ @@ -135,7 +135,7 @@ static struct adm1021_data *adm1021_update_device(struct device *dev) ADM1023_REG_REM_OFFSET_PREC); } data->last_updated = jiffies; - data->valid = 1; + data->valid = true; } mutex_unlock(&data->update_lock); diff --git a/drivers/hwmon/adm1025.c b/drivers/hwmon/adm1025.c index de51e01c061bae..4352f6a884e8f3 100644 --- a/drivers/hwmon/adm1025.c +++ b/drivers/hwmon/adm1025.c @@ -97,7 +97,7 @@ struct adm1025_data { struct i2c_client *client; const struct attribute_group *groups[3]; struct mutex update_lock; - char valid; /* zero until following fields are valid */ + bool valid; /* false until following fields are valid */ unsigned long last_updated; /* in jiffies */ u8 in[6]; /* register value */ @@ -148,7 +148,7 @@ static struct adm1025_data *adm1025_update_device(struct device *dev) ADM1025_REG_VID4) & 0x01) << 4); data->last_updated = jiffies; - data->valid = 1; + data->valid = true; } mutex_unlock(&data->update_lock); diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c index 49cefbadb156a1..69b3ec75294474 100644 --- a/drivers/hwmon/adm1026.c +++ b/drivers/hwmon/adm1026.c @@ -259,7 +259,7 @@ struct adm1026_data { const struct attribute_group *groups[3]; struct mutex update_lock; - int valid; /* !=0 if following fields are valid */ + bool valid; /* true if following fields are valid */ unsigned long last_reading; /* In jiffies */ unsigned long last_config; /* In jiffies */ @@ -459,7 +459,7 @@ static struct adm1026_data *adm1026_update_device(struct device *dev) data->last_config = jiffies; } /* last_config */ - data->valid = 1; + data->valid = true; mutex_unlock(&data->update_lock); return data; } diff --git a/drivers/hwmon/adm1029.c b/drivers/hwmon/adm1029.c index 50b1df7b008c2d..3e1999413f3252 100644 --- a/drivers/hwmon/adm1029.c +++ b/drivers/hwmon/adm1029.c @@ -99,7 +99,7 @@ static const u8 ADM1029_REG_FAN_DIV[] = { struct adm1029_data { struct i2c_client *client; struct mutex update_lock; /* protect register access */ - char valid; /* zero until following fields are valid */ + bool valid; /* false until following fields are valid */ unsigned long last_updated; /* in jiffies */ /* registers values, signed for temperature, unsigned for other stuff */ @@ -143,7 +143,7 @@ static struct adm1029_data *adm1029_update_device(struct device *dev) } data->last_updated = jiffies; - data->valid = 1; + data->valid = true; } mutex_unlock(&data->update_lock); diff --git a/drivers/hwmon/adm1031.c b/drivers/hwmon/adm1031.c index b538ace2d2924d..257ec53ae72302 100644 --- a/drivers/hwmon/adm1031.c +++ b/drivers/hwmon/adm1031.c @@ -65,7 +65,7 @@ struct adm1031_data { const struct attribute_group *groups[3]; struct mutex update_lock; int chip_type; - char valid; /* !=0 if following fields are valid */ + bool valid; /* true if following fields are valid */ unsigned long last_updated; /* In jiffies */ unsigned int update_interval; /* In milliseconds */ /* @@ -187,7 +187,7 @@ static struct adm1031_data *adm1031_update_device(struct device *dev) ADM1031_REG_PWM) >> (4 * chan)) & 0x0f; } data->last_updated = jiffies; - data->valid = 1; + data->valid = true; } mutex_unlock(&data->update_lock); @@ -650,7 +650,7 @@ static ssize_t fan_div_store(struct device *dev, data->fan_min[nr]); /* Invalidate the cache: fan speed is no longer valid */ - data->valid = 0; + data->valid = false; mutex_unlock(&data->update_lock); return count; } diff --git a/drivers/hwmon/adt7310.c b/drivers/hwmon/adt7310.c index 9fad01191620c5..c40cac16af6838 100644 --- a/drivers/hwmon/adt7310.c +++ b/drivers/hwmon/adt7310.c @@ -90,7 +90,8 @@ static int adt7310_spi_probe(struct spi_device *spi) static int adt7310_spi_remove(struct spi_device *spi) { - return adt7x10_remove(&spi->dev, spi->irq); + adt7x10_remove(&spi->dev, spi->irq); + return 0; } static const struct spi_device_id adt7310_id[] = { diff --git a/drivers/hwmon/adt7410.c b/drivers/hwmon/adt7410.c index 9d80895d0266e8..973db057427be6 100644 --- a/drivers/hwmon/adt7410.c +++ b/drivers/hwmon/adt7410.c @@ -50,7 +50,8 @@ static int adt7410_i2c_probe(struct i2c_client *client) static int adt7410_i2c_remove(struct i2c_client *client) { - return adt7x10_remove(&client->dev, client->irq); + adt7x10_remove(&client->dev, client->irq); + return 0; } static const struct i2c_device_id adt7410_ids[] = { diff --git a/drivers/hwmon/adt7x10.c b/drivers/hwmon/adt7x10.c index 3f03b4cf585858..e9d33aa78a1937 100644 --- a/drivers/hwmon/adt7x10.c +++ b/drivers/hwmon/adt7x10.c @@ -444,7 +444,7 @@ exit_restore: } EXPORT_SYMBOL_GPL(adt7x10_probe); -int adt7x10_remove(struct device *dev, int irq) +void adt7x10_remove(struct device *dev, int irq) { struct adt7x10_data *data = dev_get_drvdata(dev); @@ -457,7 +457,6 @@ int adt7x10_remove(struct device *dev, int irq) sysfs_remove_group(&dev->kobj, &adt7x10_group); if (data->oldconfig != data->config) adt7x10_write_byte(dev, ADT7X10_CONFIG, data->oldconfig); - return 0; } EXPORT_SYMBOL_GPL(adt7x10_remove); diff --git a/drivers/hwmon/adt7x10.h b/drivers/hwmon/adt7x10.h index 21ad15ce316370..a1ae682eb32e6b 100644 --- a/drivers/hwmon/adt7x10.h +++ b/drivers/hwmon/adt7x10.h @@ -26,7 +26,7 @@ struct adt7x10_ops { int adt7x10_probe(struct device *dev, const char *name, int irq, const struct adt7x10_ops *ops); -int adt7x10_remove(struct device *dev, int irq); +void adt7x10_remove(struct device *dev, int irq); #ifdef CONFIG_PM_SLEEP extern const struct dev_pm_ops adt7x10_dev_pm_ops; diff --git a/drivers/hwmon/amc6821.c b/drivers/hwmon/amc6821.c index 6b1ce2242c6187..0c16face3fd3a6 100644 --- a/drivers/hwmon/amc6821.c +++ b/drivers/hwmon/amc6821.c @@ -141,7 +141,7 @@ static const u8 fan_reg_hi[] = {AMC6821_REG_TDATA_HI, struct amc6821_data { struct i2c_client *client; struct mutex update_lock; - char valid; /* zero until following fields are valid */ + bool valid; /* false until following fields are valid */ unsigned long last_updated; /* in jiffies */ /* register values */ @@ -258,7 +258,7 @@ static struct amc6821_data *amc6821_update_device(struct device *dev) } data->last_updated = jiffies; - data->valid = 1; + data->valid = true; } mutex_unlock(&data->update_lock); return data; @@ -511,7 +511,7 @@ static ssize_t temp_auto_point_temp_store(struct device *dev, } mutex_lock(&data->update_lock); - data->valid = 0; + data->valid = false; switch (ix) { case 0: @@ -584,7 +584,7 @@ static ssize_t pwm1_auto_point_pwm_store(struct device *dev, } EXIT: - data->valid = 0; + data->valid = false; mutex_unlock(&data->update_lock); return count; } diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c index c31759794a29ad..fc6d6a9053cee8 100644 --- a/drivers/hwmon/applesmc.c +++ b/drivers/hwmon/applesmc.c @@ -391,7 +391,7 @@ static const struct applesmc_entry *applesmc_get_entry_by_index(int index) cache->len = info[0]; memcpy(cache->type, &info[1], 4); cache->flags = info[5]; - cache->valid = 1; + cache->valid = true; out: mutex_unlock(&smcreg.mutex); diff --git a/drivers/hwmon/asb100.c b/drivers/hwmon/asb100.c index ba9fcf6f9264c9..8cf0bcb85eb4e3 100644 --- a/drivers/hwmon/asb100.c +++ b/drivers/hwmon/asb100.c @@ -186,7 +186,7 @@ struct asb100_data { /* array of 2 pointers to subclients */ struct i2c_client *lm75[2]; - char valid; /* !=0 if following fields are valid */ + bool valid; /* true if following fields are valid */ u8 in[7]; /* Register value */ u8 in_max[7]; /* Register value */ u8 in_min[7]; /* Register value */ @@ -993,7 +993,7 @@ static struct asb100_data *asb100_update_device(struct device *dev) (asb100_read_value(client, ASB100_REG_ALARM2) << 8); data->last_updated = jiffies; - data->valid = 1; + data->valid = true; dev_dbg(&client->dev, "... device update complete\n"); } diff --git a/drivers/hwmon/asc7621.c b/drivers/hwmon/asc7621.c index 600ffc7e1900c0..e835605a745699 100644 --- a/drivers/hwmon/asc7621.c +++ b/drivers/hwmon/asc7621.c @@ -77,7 +77,7 @@ struct asc7621_data { struct i2c_client client; struct device *class_dev; struct mutex update_lock; - int valid; /* !=0 if following fields are valid */ + bool valid; /* true if following fields are valid */ unsigned long last_high_reading; /* In jiffies */ unsigned long last_low_reading; /* In jiffies */ /* @@ -1032,7 +1032,7 @@ static struct asc7621_data *asc7621_update_device(struct device *dev) data->last_low_reading = jiffies; } /* last_reading */ - data->valid = 1; + data->valid = true; mutex_unlock(&data->update_lock); diff --git a/drivers/hwmon/atxp1.c b/drivers/hwmon/atxp1.c index 1e08a5431f1281..4fd8de8022bc72 100644 --- a/drivers/hwmon/atxp1.c +++ b/drivers/hwmon/atxp1.c @@ -37,7 +37,7 @@ struct atxp1_data { struct i2c_client *client; struct mutex update_lock; unsigned long last_updated; - u8 valid; + bool valid; struct { u8 vid; /* VID output register */ u8 cpu_vid; /* VID input from CPU */ @@ -63,7 +63,7 @@ static struct atxp1_data *atxp1_update_device(struct device *dev) data->reg.gpio1 = i2c_smbus_read_byte_data(client, ATXP1_GPIO1); data->reg.gpio2 = i2c_smbus_read_byte_data(client, ATXP1_GPIO2); - data->valid = 1; + data->valid = true; } mutex_unlock(&data->update_lock); @@ -136,7 +136,7 @@ static ssize_t cpu0_vid_store(struct device *dev, ATXP1_VID, cvid | ATXP1_VIDENA); } - data->valid = 0; + data->valid = false; return count; } @@ -180,7 +180,7 @@ static ssize_t gpio1_store(struct device *dev, struct device_attribute *attr, i2c_smbus_write_byte_data(client, ATXP1_GPIO1, value); - data->valid = 0; + data->valid = false; } return count; @@ -224,7 +224,7 @@ static ssize_t gpio2_store(struct device *dev, struct device_attribute *attr, i2c_smbus_write_byte_data(client, ATXP1_GPIO2, value); - data->valid = 0; + data->valid = false; } return count; diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c index bb9211215a688f..ccf0af5b988a7c 100644 --- a/drivers/hwmon/coretemp.c +++ b/drivers/hwmon/coretemp.c @@ -167,7 +167,7 @@ static ssize_t show_temp(struct device *dev, * really help at all. */ tdata->temp = tdata->tjmax - ((eax >> 16) & 0x7f) * 1000; - tdata->valid = 1; + tdata->valid = true; tdata->last_updated = jiffies; } diff --git a/drivers/hwmon/dell-smm-hwmon.c b/drivers/hwmon/dell-smm-hwmon.c index 774c1b0715d914..eaace478f50878 100644 --- a/drivers/hwmon/dell-smm-hwmon.c +++ b/drivers/hwmon/dell-smm-hwmon.c @@ -12,24 +12,24 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt +#include <linux/capability.h> #include <linux/cpu.h> +#include <linux/ctype.h> #include <linux/delay.h> +#include <linux/dmi.h> #include <linux/err.h> +#include <linux/errno.h> +#include <linux/hwmon.h> +#include <linux/init.h> #include <linux/module.h> +#include <linux/mutex.h> #include <linux/platform_device.h> -#include <linux/types.h> -#include <linux/init.h> #include <linux/proc_fs.h> #include <linux/seq_file.h> -#include <linux/dmi.h> -#include <linux/capability.h> -#include <linux/mutex.h> -#include <linux/hwmon.h> -#include <linux/uaccess.h> -#include <linux/io.h> -#include <linux/sched.h> -#include <linux/ctype.h> +#include <linux/string.h> #include <linux/smp.h> +#include <linux/types.h> +#include <linux/uaccess.h> #include <linux/i8k.h> @@ -76,6 +76,7 @@ struct dell_smm_data { int temp_type[DELL_SMM_NO_TEMP]; bool fan[DELL_SMM_NO_FANS]; int fan_type[DELL_SMM_NO_FANS]; + int *fan_nominal_speed[DELL_SMM_NO_FANS]; }; MODULE_AUTHOR("Massimo Dal Zotto (dz@debian.org)"); @@ -326,7 +327,7 @@ static int i8k_enable_fan_auto_mode(const struct dell_smm_data *data, bool enabl } /* - * Set the fan speed (off, low, high). Returns the new fan status. + * Set the fan speed (off, low, high, ...). */ static int i8k_set_fan(const struct dell_smm_data *data, int fan, int speed) { @@ -338,7 +339,7 @@ static int i8k_set_fan(const struct dell_smm_data *data, int fan, int speed) speed = (speed < 0) ? 0 : ((speed > data->i8k_fan_max) ? data->i8k_fan_max : speed); regs.ebx = (fan & 0xff) | (speed << 8); - return i8k_smm(®s) ? : i8k_get_fan_status(data, fan); + return i8k_smm(®s); } static int __init i8k_get_temp_type(int sensor) @@ -452,7 +453,7 @@ static int i8k_ioctl_unlocked(struct file *fp, struct dell_smm_data *data, unsigned int cmd, unsigned long arg) { int val = 0; - int speed; + int speed, err; unsigned char buff[16]; int __user *argp = (int __user *)arg; @@ -473,8 +474,7 @@ i8k_ioctl_unlocked(struct file *fp, struct dell_smm_data *data, unsigned int cmd if (restricted && !capable(CAP_SYS_ADMIN)) return -EPERM; - memset(buff, 0, sizeof(buff)); - strscpy(buff, data->bios_machineid, sizeof(buff)); + strscpy_pad(buff, data->bios_machineid, sizeof(buff)); break; case I8K_FN_STATUS: @@ -513,11 +513,15 @@ i8k_ioctl_unlocked(struct file *fp, struct dell_smm_data *data, unsigned int cmd if (copy_from_user(&speed, argp + 1, sizeof(int))) return -EFAULT; - val = i8k_set_fan(data, val, speed); + err = i8k_set_fan(data, val, speed); + if (err < 0) + return err; + + val = i8k_get_fan_status(data, val); break; default: - return -EINVAL; + return -ENOIOCTLCMD; } if (val < 0) @@ -674,6 +678,13 @@ static umode_t dell_smm_is_visible(const void *drvdata, enum hwmon_sensor_types return 0444; break; + case hwmon_fan_min: + case hwmon_fan_max: + case hwmon_fan_target: + if (data->fan_nominal_speed[channel]) + return 0444; + + break; default: break; } @@ -741,6 +752,25 @@ static int dell_smm_read(struct device *dev, enum hwmon_sensor_types type, u32 a *val = ret; return 0; + case hwmon_fan_min: + *val = data->fan_nominal_speed[channel][0]; + + return 0; + case hwmon_fan_max: + *val = data->fan_nominal_speed[channel][data->i8k_fan_max]; + + return 0; + case hwmon_fan_target: + ret = i8k_get_fan_status(data, channel); + if (ret < 0) + return ret; + + if (ret > data->i8k_fan_max) + ret = data->i8k_fan_max; + + *val = data->fan_nominal_speed[channel][ret]; + + return 0; default: break; } @@ -889,9 +919,12 @@ static const struct hwmon_channel_info *dell_smm_info[] = { HWMON_T_INPUT | HWMON_T_LABEL ), HWMON_CHANNEL_INFO(fan, - HWMON_F_INPUT | HWMON_F_LABEL, - HWMON_F_INPUT | HWMON_F_LABEL, - HWMON_F_INPUT | HWMON_F_LABEL + HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_MIN | HWMON_F_MAX | + HWMON_F_TARGET, + HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_MIN | HWMON_F_MAX | + HWMON_F_TARGET, + HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_MIN | HWMON_F_MAX | + HWMON_F_TARGET ), HWMON_CHANNEL_INFO(pwm, HWMON_PWM_INPUT | HWMON_PWM_ENABLE, @@ -910,7 +943,7 @@ static int __init dell_smm_init_hwmon(struct device *dev) { struct dell_smm_data *data = dev_get_drvdata(dev); struct device *dell_smm_hwmon_dev; - int i, err; + int i, state, err; for (i = 0; i < DELL_SMM_NO_TEMP; i++) { data->temp_type[i] = i8k_get_temp_type(i); @@ -926,8 +959,27 @@ static int __init dell_smm_init_hwmon(struct device *dev) err = i8k_get_fan_status(data, i); if (err < 0) err = i8k_get_fan_type(data, i); - if (err >= 0) - data->fan[i] = true; + + if (err < 0) + continue; + + data->fan[i] = true; + data->fan_nominal_speed[i] = devm_kmalloc_array(dev, data->i8k_fan_max + 1, + sizeof(*data->fan_nominal_speed[i]), + GFP_KERNEL); + if (!data->fan_nominal_speed[i]) + continue; + + for (state = 0; state <= data->i8k_fan_max; state++) { + err = i8k_get_fan_nominal_speed(data, i, state); + if (err < 0) { + /* Mark nominal speed table as invalid in case of error */ + devm_kfree(dev, data->fan_nominal_speed[i]); + data->fan_nominal_speed[i] = NULL; + break; + } + data->fan_nominal_speed[i][state] = err; + } } dell_smm_hwmon_dev = devm_hwmon_device_register_with_info(dev, "dell_smm", data, @@ -948,6 +1000,11 @@ enum i8k_configs { DELL_XPS, }; +/* + * Only use for machines which need some special configuration + * in order to work correctly (e.g. if autoconfig fails on this machines). + */ + static const struct i8k_config_data i8k_config_data[] __initconst = { [DELL_LATITUDE_D520] = { .fan_mult = 1, diff --git a/drivers/hwmon/dme1737.c b/drivers/hwmon/dme1737.c index c1e4cfb40c3def..e3ad4c2d0038c8 100644 --- a/drivers/hwmon/dme1737.c +++ b/drivers/hwmon/dme1737.c @@ -203,7 +203,7 @@ struct dme1737_data { unsigned int addr; /* for ISA devices only */ struct mutex update_lock; - int valid; /* !=0 if following fields are valid */ + bool valid; /* true if following fields are valid */ unsigned long last_update; /* in jiffies */ unsigned long last_vbat; /* in jiffies */ enum chips type; @@ -778,7 +778,7 @@ static struct dme1737_data *dme1737_update_device(struct device *dev) } data->last_update = jiffies; - data->valid = 1; + data->valid = true; } mutex_unlock(&data->update_lock); diff --git a/drivers/hwmon/ds1621.c b/drivers/hwmon/ds1621.c index bf1c4b7ecb404a..0886abf6ebab14 100644 --- a/drivers/hwmon/ds1621.c +++ b/drivers/hwmon/ds1621.c @@ -109,7 +109,7 @@ static const u8 DS1621_REG_TEMP[3] = { struct ds1621_data { struct i2c_client *client; struct mutex update_lock; - char valid; /* !=0 if following fields are valid */ + bool valid; /* true if following fields are valid */ unsigned long last_updated; /* In jiffies */ enum chips kind; /* device type */ @@ -213,7 +213,7 @@ static struct ds1621_data *ds1621_update_client(struct device *dev) new_conf); data->last_updated = jiffies; - data->valid = 1; + data->valid = true; } mutex_unlock(&data->update_lock); diff --git a/drivers/hwmon/ds620.c b/drivers/hwmon/ds620.c index 9ec722798c4a85..82d7c3d58f49bd 100644 --- a/drivers/hwmon/ds620.c +++ b/drivers/hwmon/ds620.c @@ -56,7 +56,7 @@ static const u8 DS620_REG_TEMP[3] = { struct ds620_data { struct i2c_client *client; struct mutex update_lock; - char valid; /* !=0 if following fields are valid */ + bool valid; /* true if following fields are valid */ unsigned long last_updated; /* In jiffies */ s16 temp[3]; /* Register values, word */ @@ -118,7 +118,7 @@ static struct ds620_data *ds620_update_client(struct device *dev) } data->last_updated = jiffies; - data->valid = 1; + data->valid = true; } abort: mutex_unlock(&data->update_lock); diff --git a/drivers/hwmon/emc6w201.c b/drivers/hwmon/emc6w201.c index ec5c98702bf547..29082c8463f498 100644 --- a/drivers/hwmon/emc6w201.c +++ b/drivers/hwmon/emc6w201.c @@ -45,7 +45,7 @@ enum subfeature { input, min, max }; struct emc6w201_data { struct i2c_client *client; struct mutex update_lock; - char valid; /* zero until following fields are valid */ + bool valid; /* false until following fields are valid */ unsigned long last_updated; /* in jiffies */ /* registers values */ @@ -162,7 +162,7 @@ static struct emc6w201_data *emc6w201_update_device(struct device *dev) } data->last_updated = jiffies; - data->valid = 1; + data->valid = true; } mutex_unlock(&data->update_lock); diff --git a/drivers/hwmon/f71805f.c b/drivers/hwmon/f71805f.c index 67b47de8263afb..7f20edb0677ccc 100644 --- a/drivers/hwmon/f71805f.c +++ b/drivers/hwmon/f71805f.c @@ -165,7 +165,7 @@ struct f71805f_data { struct device *hwmon_dev; struct mutex update_lock; - char valid; /* !=0 if following fields are valid */ + bool valid; /* true if following fields are valid */ unsigned long last_updated; /* In jiffies */ unsigned long last_limits; /* In jiffies */ @@ -404,7 +404,7 @@ static struct f71805f_data *f71805f_update_device(struct device *dev) + (f71805f_read8(data, F71805F_REG_STATUS(2)) << 16); data->last_updated = jiffies; - data->valid = 1; + data->valid = true; } mutex_unlock(&data->update_lock); diff --git a/drivers/hwmon/f71882fg.c b/drivers/hwmon/f71882fg.c index 4dec793fd07d57..4673d403759a52 100644 --- a/drivers/hwmon/f71882fg.c +++ b/drivers/hwmon/f71882fg.c @@ -253,7 +253,7 @@ struct f71882fg_data { struct mutex update_lock; int temp_start; /* temp numbering start (0 or 1) */ - char valid; /* !=0 if following fields are valid */ + bool valid; /* true if following fields are valid */ char auto_point_temp_signed; unsigned long last_updated; /* In jiffies */ unsigned long last_limits; /* In jiffies */ @@ -1359,7 +1359,7 @@ static struct f71882fg_data *f71882fg_update_device(struct device *dev) F71882FG_REG_IN(nr)); data->last_updated = jiffies; - data->valid = 1; + data->valid = true; } mutex_unlock(&data->update_lock); diff --git a/drivers/hwmon/f75375s.c b/drivers/hwmon/f75375s.c index 3e567be60fb158..57c8a473698d20 100644 --- a/drivers/hwmon/f75375s.c +++ b/drivers/hwmon/f75375s.c @@ -85,7 +85,7 @@ struct f75375_data { const char *name; int kind; struct mutex update_lock; /* protect register access */ - char valid; + bool valid; unsigned long last_updated; /* In jiffies */ unsigned long last_limits; /* In jiffies */ @@ -228,7 +228,7 @@ static struct f75375_data *f75375_update_device(struct device *dev) f75375_read8(client, F75375_REG_VOLT(nr)); data->last_updated = jiffies; - data->valid = 1; + data->valid = true; } mutex_unlock(&data->update_lock); diff --git a/drivers/hwmon/fschmd.c b/drivers/hwmon/fschmd.c index 5191cd85a8d13c..c26195e3aad780 100644 --- a/drivers/hwmon/fschmd.c +++ b/drivers/hwmon/fschmd.c @@ -264,7 +264,7 @@ struct fschmd_data { unsigned long watchdog_is_open; char watchdog_expect_close; char watchdog_name[10]; /* must be unique to avoid sysfs conflict */ - char valid; /* zero until following fields are valid */ + bool valid; /* false until following fields are valid */ unsigned long last_updated; /* in jiffies */ /* register values */ @@ -1356,7 +1356,7 @@ static struct fschmd_data *fschmd_update_device(struct device *dev) FSCHMD_REG_VOLT[data->kind][i]); data->last_updated = jiffies; - data->valid = 1; + data->valid = true; } mutex_unlock(&data->update_lock); diff --git a/drivers/hwmon/g760a.c b/drivers/hwmon/g760a.c index a692f7b2f6f7df..36717b524dbd5f 100644 --- a/drivers/hwmon/g760a.c +++ b/drivers/hwmon/g760a.c @@ -95,7 +95,7 @@ static struct g760a_data *g760a_update_client(struct device *dev) data->fan_sta = g760a_read_value(client, G760A_REG_FAN_STA); data->last_updated = jiffies; - data->valid = 1; + data->valid = true; } mutex_unlock(&data->update_lock); diff --git a/drivers/hwmon/gl518sm.c b/drivers/hwmon/gl518sm.c index 7aaee5a48243ba..dd683b0a648f9a 100644 --- a/drivers/hwmon/gl518sm.c +++ b/drivers/hwmon/gl518sm.c @@ -107,7 +107,7 @@ struct gl518_data { enum chips type; struct mutex update_lock; - char valid; /* !=0 if following fields are valid */ + bool valid; /* true if following fields are valid */ unsigned long last_updated; /* In jiffies */ u8 voltage_in[4]; /* Register values; [0] = VDD */ @@ -211,7 +211,7 @@ static struct gl518_data *gl518_update_device(struct device *dev) gl518_read_value(client, GL518_REG_VIN3); data->last_updated = jiffies; - data->valid = 1; + data->valid = true; } mutex_unlock(&data->update_lock); diff --git a/drivers/hwmon/gl520sm.c b/drivers/hwmon/gl520sm.c index 4ae1295cc3ea7a..096ba979721154 100644 --- a/drivers/hwmon/gl520sm.c +++ b/drivers/hwmon/gl520sm.c @@ -64,7 +64,7 @@ struct gl520_data { struct i2c_client *client; const struct attribute_group *groups[3]; struct mutex update_lock; - char valid; /* zero until the following fields are valid */ + bool valid; /* false until the following fields are valid */ unsigned long last_updated; /* in jiffies */ u8 vid; @@ -174,7 +174,7 @@ static struct gl520_data *gl520_update_device(struct device *dev) } data->last_updated = jiffies; - data->valid = 1; + data->valid = true; } mutex_unlock(&data->update_lock); diff --git a/drivers/hwmon/hwmon.c b/drivers/hwmon/hwmon.c index 8d3b1dae31df15..3501a3ead4ba60 100644 --- a/drivers/hwmon/hwmon.c +++ b/drivers/hwmon/hwmon.c @@ -796,8 +796,10 @@ __hwmon_device_register(struct device *dev, const char *name, void *drvdata, dev_set_drvdata(hdev, drvdata); dev_set_name(hdev, HWMON_ID_FORMAT, id); err = device_register(hdev); - if (err) - goto free_hwmon; + if (err) { + put_device(hdev); + goto ida_remove; + } INIT_LIST_HEAD(&hwdev->tzdata); diff --git a/drivers/hwmon/i5500_temp.c b/drivers/hwmon/i5500_temp.c index 360f5aee139476..05f68e9c9477ed 100644 --- a/drivers/hwmon/i5500_temp.c +++ b/drivers/hwmon/i5500_temp.c @@ -5,6 +5,7 @@ * Copyright (C) 2012, 2014 Jean Delvare <jdelvare@suse.de> */ +#include <linux/bitops.h> #include <linux/module.h> #include <linux/init.h> #include <linux/slab.h> @@ -12,7 +13,6 @@ #include <linux/device.h> #include <linux/pci.h> #include <linux/hwmon.h> -#include <linux/hwmon-sysfs.h> #include <linux/err.h> #include <linux/mutex.h> @@ -29,69 +29,78 @@ #define REG_CTCTRL 0xF7 #define REG_TSTIMER 0xF8 -/* - * Sysfs stuff - */ - -/* Sensor resolution : 0.5 degree C */ -static ssize_t temp1_input_show(struct device *dev, - struct device_attribute *devattr, char *buf) +static umode_t i5500_is_visible(const void *drvdata, enum hwmon_sensor_types type, u32 attr, + int channel) { - struct pci_dev *pdev = to_pci_dev(dev->parent); - long temp; - u16 tsthrhi; - s8 tsfsc; - - pci_read_config_word(pdev, REG_TSTHRHI, &tsthrhi); - pci_read_config_byte(pdev, REG_TSFSC, &tsfsc); - temp = ((long)tsthrhi - tsfsc) * 500; - - return sprintf(buf, "%ld\n", temp); + return 0444; } -static ssize_t thresh_show(struct device *dev, - struct device_attribute *devattr, char *buf) +static int i5500_read(struct device *dev, enum hwmon_sensor_types type, u32 attr, int channel, + long *val) { struct pci_dev *pdev = to_pci_dev(dev->parent); - int reg = to_sensor_dev_attr(devattr)->index; - long temp; u16 tsthr; + s8 tsfsc; + u8 ctsts; - pci_read_config_word(pdev, reg, &tsthr); - temp = tsthr * 500; + switch (type) { + case hwmon_temp: + switch (attr) { + /* Sensor resolution : 0.5 degree C */ + case hwmon_temp_input: + pci_read_config_word(pdev, REG_TSTHRHI, &tsthr); + pci_read_config_byte(pdev, REG_TSFSC, &tsfsc); + *val = (tsthr - tsfsc) * 500; + return 0; + case hwmon_temp_max: + pci_read_config_word(pdev, REG_TSTHRHI, &tsthr); + *val = tsthr * 500; + return 0; + case hwmon_temp_max_hyst: + pci_read_config_word(pdev, REG_TSTHRLO, &tsthr); + *val = tsthr * 500; + return 0; + case hwmon_temp_crit: + pci_read_config_word(pdev, REG_TSTHRCATA, &tsthr); + *val = tsthr * 500; + return 0; + case hwmon_temp_max_alarm: + pci_read_config_byte(pdev, REG_CTSTS, &ctsts); + *val = !!(ctsts & BIT(1)); + return 0; + case hwmon_temp_crit_alarm: + pci_read_config_byte(pdev, REG_CTSTS, &ctsts); + *val = !!(ctsts & BIT(0)); + return 0; + default: + break; + } + break; + default: + break; + } - return sprintf(buf, "%ld\n", temp); + return -EOPNOTSUPP; } -static ssize_t alarm_show(struct device *dev, - struct device_attribute *devattr, char *buf) -{ - struct pci_dev *pdev = to_pci_dev(dev->parent); - int nr = to_sensor_dev_attr(devattr)->index; - u8 ctsts; - - pci_read_config_byte(pdev, REG_CTSTS, &ctsts); - return sprintf(buf, "%u\n", (unsigned int)ctsts & (1 << nr)); -} +static const struct hwmon_ops i5500_ops = { + .is_visible = i5500_is_visible, + .read = i5500_read, +}; -static DEVICE_ATTR_RO(temp1_input); -static SENSOR_DEVICE_ATTR_RO(temp1_crit, thresh, 0xE2); -static SENSOR_DEVICE_ATTR_RO(temp1_max_hyst, thresh, 0xEC); -static SENSOR_DEVICE_ATTR_RO(temp1_max, thresh, 0xEE); -static SENSOR_DEVICE_ATTR_RO(temp1_crit_alarm, alarm, 0); -static SENSOR_DEVICE_ATTR_RO(temp1_max_alarm, alarm, 1); - -static struct attribute *i5500_temp_attrs[] = { - &dev_attr_temp1_input.attr, - &sensor_dev_attr_temp1_crit.dev_attr.attr, - &sensor_dev_attr_temp1_max_hyst.dev_attr.attr, - &sensor_dev_attr_temp1_max.dev_attr.attr, - &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr, - &sensor_dev_attr_temp1_max_alarm.dev_attr.attr, +static const struct hwmon_channel_info *i5500_info[] = { + HWMON_CHANNEL_INFO(chip, HWMON_C_REGISTER_TZ), + HWMON_CHANNEL_INFO(temp, + HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MAX_HYST | HWMON_T_CRIT | + HWMON_T_MAX_ALARM | HWMON_T_CRIT_ALARM + ), NULL }; -ATTRIBUTE_GROUPS(i5500_temp); +static const struct hwmon_chip_info i5500_chip_info = { + .ops = &i5500_ops, + .info = i5500_info, +}; static const struct pci_device_id i5500_temp_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x3438) }, @@ -121,9 +130,8 @@ static int i5500_temp_probe(struct pci_dev *pdev, return -ENODEV; } - hwmon_dev = devm_hwmon_device_register_with_groups(&pdev->dev, - "intel5500", NULL, - i5500_temp_groups); + hwmon_dev = devm_hwmon_device_register_with_info(&pdev->dev, "intel5500", NULL, + &i5500_chip_info, NULL); return PTR_ERR_OR_ZERO(hwmon_dev); } diff --git a/drivers/hwmon/ibmaem.c b/drivers/hwmon/ibmaem.c index a4ec85207782d8..de6baf6ca3d1e0 100644 --- a/drivers/hwmon/ibmaem.c +++ b/drivers/hwmon/ibmaem.c @@ -127,7 +127,7 @@ struct aem_data { struct device *hwmon_dev; struct platform_device *pdev; struct mutex lock; - char valid; + bool valid; unsigned long last_updated; /* In jiffies */ u8 ver_major; u8 ver_minor; diff --git a/drivers/hwmon/ibmpex.c b/drivers/hwmon/ibmpex.c index b2ab83c9fd9a8c..f6ec165c0fa8b6 100644 --- a/drivers/hwmon/ibmpex.c +++ b/drivers/hwmon/ibmpex.c @@ -66,7 +66,7 @@ struct ibmpex_bmc_data { struct device *hwmon_dev; struct device *bmc_device; struct mutex lock; - char valid; + bool valid; unsigned long last_updated; /* In jiffies */ struct ipmi_addr address; @@ -239,7 +239,7 @@ static void ibmpex_update_device(struct ibmpex_bmc_data *data) } data->last_updated = jiffies; - data->valid = 1; + data->valid = true; out: mutex_unlock(&data->lock); diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index 1f93134afcb9f9..0e543dbe0a6b3e 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -519,7 +519,7 @@ struct it87_data { unsigned short addr; const char *name; struct mutex update_lock; - char valid; /* !=0 if following fields are valid */ + bool valid; /* true if following fields are valid */ unsigned long last_updated; /* In jiffies */ u16 in_scaled; /* Internal voltage sensors are scaled */ @@ -844,7 +844,7 @@ static struct it87_data *it87_update_device(struct device *dev) data->vid &= 0x3f; } data->last_updated = jiffies; - data->valid = 1; + data->valid = true; } mutex_unlock(&data->update_lock); @@ -980,7 +980,7 @@ static ssize_t set_temp(struct device *dev, struct device_attribute *attr, regval |= 0x80; it87_write_value(data, IT87_REG_BEEP_ENABLE, regval); } - data->valid = 0; + data->valid = false; reg = IT87_REG_TEMP_OFFSET[nr]; break; } @@ -1079,7 +1079,7 @@ static ssize_t set_temp_type(struct device *dev, struct device_attribute *attr, it87_write_value(data, IT87_REG_TEMP_ENABLE, data->sensor); if (has_temp_old_peci(data, nr)) it87_write_value(data, IT87_REG_TEMP_EXTRA, data->extra); - data->valid = 0; /* Force cache refresh */ + data->valid = false; /* Force cache refresh */ mutex_unlock(&data->update_lock); return count; } @@ -1834,7 +1834,7 @@ static ssize_t clear_intrusion(struct device *dev, config |= BIT(5); it87_write_value(data, IT87_REG_CONFIG, config); /* Invalidate cache to force re-read */ - data->valid = 0; + data->valid = false; } mutex_unlock(&data->update_lock); @@ -3229,7 +3229,7 @@ static int __maybe_unused it87_resume(struct device *dev) it87_start_monitoring(data); /* force update */ - data->valid = 0; + data->valid = false; mutex_unlock(&data->update_lock); diff --git a/drivers/hwmon/lineage-pem.c b/drivers/hwmon/lineage-pem.c index 1109fffa76fb08..ef5a49cd91498a 100644 --- a/drivers/hwmon/lineage-pem.c +++ b/drivers/hwmon/lineage-pem.c @@ -191,7 +191,7 @@ static struct pem_data *pem_update_device(struct device *dev) i2c_smbus_write_byte(client, PEM_CLEAR_INFO_FLAGS); data->last_updated = jiffies; - data->valid = 1; + data->valid = true; } abort: mutex_unlock(&data->update_lock); diff --git a/drivers/hwmon/lm63.c b/drivers/hwmon/lm63.c index c8f93c5d1ccc1c..339a145afc093c 100644 --- a/drivers/hwmon/lm63.c +++ b/drivers/hwmon/lm63.c @@ -139,7 +139,7 @@ struct lm63_data { struct i2c_client *client; struct mutex update_lock; const struct attribute_group *groups[5]; - char valid; /* zero until following fields are valid */ + bool valid; /* false until following fields are valid */ char lut_valid; /* zero until lut fields are valid */ unsigned long last_updated; /* in jiffies */ unsigned long lut_last_updated; /* in jiffies */ @@ -289,7 +289,7 @@ static struct lm63_data *lm63_update_device(struct device *dev) LM63_REG_ALERT_STATUS) & 0x7F; data->last_updated = jiffies; - data->valid = 1; + data->valid = true; } lm63_update_lut(data); @@ -714,7 +714,7 @@ static ssize_t temp2_type_store(struct device *dev, reg = i2c_smbus_read_byte_data(client, LM96163_REG_TRUTHERM) & ~0x02; i2c_smbus_write_byte_data(client, LM96163_REG_TRUTHERM, reg | (data->trutherm ? 0x02 : 0x00)); - data->valid = 0; + data->valid = false; mutex_unlock(&data->update_lock); return count; diff --git a/drivers/hwmon/lm77.c b/drivers/hwmon/lm77.c index 7570c9d50ddcae..df6af85e170aa8 100644 --- a/drivers/hwmon/lm77.c +++ b/drivers/hwmon/lm77.c @@ -55,7 +55,7 @@ static const u8 temp_regs[t_num_temp] = { struct lm77_data { struct i2c_client *client; struct mutex update_lock; - char valid; + bool valid; unsigned long last_updated; /* In jiffies */ int temp[t_num_temp]; /* index using temp_index */ u8 alarms; @@ -118,7 +118,7 @@ static struct lm77_data *lm77_update_device(struct device *dev) data->alarms = lm77_read_value(client, LM77_REG_TEMP) & 0x0007; data->last_updated = jiffies; - data->valid = 1; + data->valid = true; } mutex_unlock(&data->update_lock); diff --git a/drivers/hwmon/lm78.c b/drivers/hwmon/lm78.c index 1aa35ca0c6fed7..5e129cbec1cbbd 100644 --- a/drivers/hwmon/lm78.c +++ b/drivers/hwmon/lm78.c @@ -117,7 +117,7 @@ struct lm78_data { int isa_addr; struct mutex update_lock; - char valid; /* !=0 if following fields are valid */ + bool valid; /* true if following fields are valid */ unsigned long last_updated; /* In jiffies */ u8 in[7]; /* Register value */ @@ -772,7 +772,7 @@ static struct lm78_data *lm78_update_device(struct device *dev) data->alarms = lm78_read_value(data, LM78_REG_ALARM1) + (lm78_read_value(data, LM78_REG_ALARM2) << 8); data->last_updated = jiffies; - data->valid = 1; + data->valid = true; data->fan_div[2] = 1; } diff --git a/drivers/hwmon/lm80.c b/drivers/hwmon/lm80.c index 97ab491d2922cf..e85e062bbf327d 100644 --- a/drivers/hwmon/lm80.c +++ b/drivers/hwmon/lm80.c @@ -117,7 +117,7 @@ struct lm80_data { struct i2c_client *client; struct mutex update_lock; char error; /* !=0 if error occurred during last update */ - char valid; /* !=0 if following fields are valid */ + bool valid; /* true if following fields are valid */ unsigned long last_updated; /* In jiffies */ u8 in[i_num_in][7]; /* Register value, 1st index is enum in_index */ @@ -236,14 +236,14 @@ static struct lm80_data *lm80_update_device(struct device *dev) data->alarms = prev_rv + (rv << 8); data->last_updated = jiffies; - data->valid = 1; + data->valid = true; data->error = 0; } goto done; abort: ret = ERR_PTR(rv); - data->valid = 0; + data->valid = false; data->error = 1; done: diff --git a/drivers/hwmon/lm83.c b/drivers/hwmon/lm83.c index 2ff5ecce608e3e..74fd7aa373a3ee 100644 --- a/drivers/hwmon/lm83.c +++ b/drivers/hwmon/lm83.c @@ -105,7 +105,7 @@ struct lm83_data { struct i2c_client *client; const struct attribute_group *groups[3]; struct mutex update_lock; - char valid; /* zero until following fields are valid */ + bool valid; /* false until following fields are valid */ unsigned long last_updated; /* in jiffies */ /* registers values */ @@ -137,7 +137,7 @@ static struct lm83_data *lm83_update_device(struct device *dev) << 8); data->last_updated = jiffies; - data->valid = 1; + data->valid = true; } mutex_unlock(&data->update_lock); diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c index c7bf5de7b70f05..88cf2012d34b41 100644 --- a/drivers/hwmon/lm85.c +++ b/drivers/hwmon/lm85.c @@ -294,7 +294,7 @@ struct lm85_data { bool has_vid5; /* true if VID5 is configured for ADT7463 or ADT7468 */ struct mutex update_lock; - int valid; /* !=0 if following fields are valid */ + bool valid; /* true if following fields are valid */ unsigned long last_reading; /* In jiffies */ unsigned long last_config; /* In jiffies */ @@ -541,7 +541,7 @@ static struct lm85_data *lm85_update_device(struct device *dev) data->last_config = jiffies; } /* last_config */ - data->valid = 1; + data->valid = true; mutex_unlock(&data->update_lock); diff --git a/drivers/hwmon/lm87.c b/drivers/hwmon/lm87.c index b2d820125bb670..1750bc588856c2 100644 --- a/drivers/hwmon/lm87.c +++ b/drivers/hwmon/lm87.c @@ -141,7 +141,7 @@ static u8 LM87_REG_TEMP_LOW[3] = { 0x3A, 0x38, 0x2C }; struct lm87_data { struct mutex update_lock; - char valid; /* zero until following fields are valid */ + bool valid; /* false until following fields are valid */ unsigned long last_updated; /* In jiffies */ u8 channel; /* register value */ @@ -251,7 +251,7 @@ static struct lm87_data *lm87_update_device(struct device *dev) data->aout = lm87_read_value(client, LM87_REG_AOUT); data->last_updated = jiffies; - data->valid = 1; + data->valid = true; } mutex_unlock(&data->update_lock); diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c index 567b7c521f3883..618052c6cdb645 100644 --- a/drivers/hwmon/lm90.c +++ b/drivers/hwmon/lm90.c @@ -69,10 +69,10 @@ * This driver also supports the G781 from GMT. This device is compatible * with the ADM1032. * - * This driver also supports TMP451 from Texas Instruments. This device is - * supported in both compatibility and extended mode. It's mostly compatible - * with ADT7461 except for local temperature low byte register and max - * conversion rate. + * This driver also supports TMP451 and TMP461 from Texas Instruments. + * Those devices are supported in both compatibility and extended mode. + * They are mostly compatible with ADT7461 except for local temperature + * low byte register and max conversion rate. * * Since the LM90 was the first chipset supported by this driver, most * comments will refer to this chipset, but are actually general and @@ -112,7 +112,7 @@ static const unsigned short normal_i2c[] = { 0x4d, 0x4e, 0x4f, I2C_CLIENT_END }; enum chips { lm90, adm1032, lm99, lm86, max6657, max6659, adt7461, max6680, - max6646, w83l771, max6696, sa56004, g781, tmp451, max6654 }; + max6646, w83l771, max6696, sa56004, g781, tmp451, tmp461, max6654 }; /* * The LM90 registers @@ -168,8 +168,12 @@ enum chips { lm90, adm1032, lm99, lm86, max6657, max6659, adt7461, max6680, #define LM90_MAX_CONVRATE_MS 16000 /* Maximum conversion rate in ms */ -/* TMP451 registers */ +/* TMP451/TMP461 registers */ #define TMP451_REG_R_LOCAL_TEMPL 0x15 +#define TMP451_REG_CONALERT 0x22 + +#define TMP461_REG_CHEN 0x16 +#define TMP461_REG_DFC 0x24 /* * Device flags @@ -182,7 +186,8 @@ enum chips { lm90, adm1032, lm99, lm86, max6657, max6659, adt7461, max6680, #define LM90_HAVE_EMERGENCY_ALARM (1 << 5)/* emergency alarm */ #define LM90_HAVE_TEMP3 (1 << 6) /* 3rd temperature sensor */ #define LM90_HAVE_BROKEN_ALERT (1 << 7) /* Broken alert */ -#define LM90_PAUSE_FOR_CONFIG (1 << 8) /* Pause conversion for config */ +#define LM90_HAVE_EXTENDED_TEMP (1 << 8) /* extended temperature support*/ +#define LM90_PAUSE_FOR_CONFIG (1 << 9) /* Pause conversion for config */ /* LM90 status */ #define LM90_STATUS_LTHRM (1 << 0) /* local THERM limit tripped */ @@ -229,6 +234,7 @@ static const struct i2c_device_id lm90_id[] = { { "w83l771", w83l771 }, { "sa56004", sa56004 }, { "tmp451", tmp451 }, + { "tmp461", tmp461 }, { } }; MODULE_DEVICE_TABLE(i2c, lm90_id); @@ -326,6 +332,10 @@ static const struct of_device_id __maybe_unused lm90_of_match[] = { .compatible = "ti,tmp451", .data = (void *)tmp451 }, + { + .compatible = "ti,tmp461", + .data = (void *)tmp461 + }, { }, }; MODULE_DEVICE_TABLE(of, lm90_of_match); @@ -350,7 +360,7 @@ static const struct lm90_params lm90_params[] = { }, [adt7461] = { .flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT - | LM90_HAVE_BROKEN_ALERT, + | LM90_HAVE_BROKEN_ALERT | LM90_HAVE_EXTENDED_TEMP, .alert_alarms = 0x7c, .max_convrate = 10, }, @@ -422,7 +432,14 @@ static const struct lm90_params lm90_params[] = { }, [tmp451] = { .flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT - | LM90_HAVE_BROKEN_ALERT, + | LM90_HAVE_BROKEN_ALERT | LM90_HAVE_EXTENDED_TEMP, + .alert_alarms = 0x7c, + .max_convrate = 9, + .reg_local_ext = TMP451_REG_R_LOCAL_TEMPL, + }, + [tmp461] = { + .flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT + | LM90_HAVE_BROKEN_ALERT | LM90_HAVE_EXTENDED_TEMP, .alert_alarms = 0x7c, .max_convrate = 9, .reg_local_ext = TMP451_REG_R_LOCAL_TEMPL, @@ -998,7 +1015,7 @@ static int lm90_get_temp11(struct lm90_data *data, int index) s16 temp11 = data->temp11[index]; int temp; - if (data->kind == adt7461 || data->kind == tmp451) + if (data->flags & LM90_HAVE_EXTENDED_TEMP) temp = temp_from_u16_adt7461(data, temp11); else if (data->kind == max6646) temp = temp_from_u16(temp11); @@ -1035,7 +1052,7 @@ static int lm90_set_temp11(struct lm90_data *data, int index, long val) val -= 16000; } - if (data->kind == adt7461 || data->kind == tmp451) + if (data->flags & LM90_HAVE_EXTENDED_TEMP) data->temp11[index] = temp_to_u16_adt7461(data, val); else if (data->kind == max6646) data->temp11[index] = temp_to_u8(val) << 8; @@ -1062,7 +1079,7 @@ static int lm90_get_temp8(struct lm90_data *data, int index) s8 temp8 = data->temp8[index]; int temp; - if (data->kind == adt7461 || data->kind == tmp451) + if (data->flags & LM90_HAVE_EXTENDED_TEMP) temp = temp_from_u8_adt7461(data, temp8); else if (data->kind == max6646) temp = temp_from_u8(temp8); @@ -1098,7 +1115,7 @@ static int lm90_set_temp8(struct lm90_data *data, int index, long val) val -= 16000; } - if (data->kind == adt7461 || data->kind == tmp451) + if (data->flags & LM90_HAVE_EXTENDED_TEMP) data->temp8[index] = temp_to_u8_adt7461(data, val); else if (data->kind == max6646) data->temp8[index] = temp_to_u8(val); @@ -1116,7 +1133,7 @@ static int lm90_get_temphyst(struct lm90_data *data, int index) { int temp; - if (data->kind == adt7461 || data->kind == tmp451) + if (data->flags & LM90_HAVE_EXTENDED_TEMP) temp = temp_from_u8_adt7461(data, data->temp8[index]); else if (data->kind == max6646) temp = temp_from_u8(data->temp8[index]); @@ -1136,7 +1153,7 @@ static int lm90_set_temphyst(struct lm90_data *data, long val) int temp; int err; - if (data->kind == adt7461 || data->kind == tmp451) + if (data->flags & LM90_HAVE_EXTENDED_TEMP) temp = temp_from_u8_adt7461(data, data->temp8[LOCAL_CRIT]); else if (data->kind == max6646) temp = temp_from_u8(data->temp8[LOCAL_CRIT]); @@ -1627,18 +1644,26 @@ static int lm90_detect(struct i2c_client *client, && convrate <= 0x08) name = "g781"; } else - if (address == 0x4C - && man_id == 0x55) { /* Texas Instruments */ - int local_ext; + if (man_id == 0x55 && chip_id == 0x00 && + (config1 & 0x1B) == 0x00 && convrate <= 0x09) { + int local_ext, conalert, chen, dfc; local_ext = i2c_smbus_read_byte_data(client, TMP451_REG_R_LOCAL_TEMPL); - - if (chip_id == 0x00 /* TMP451 */ - && (config1 & 0x1B) == 0x00 - && convrate <= 0x09 - && (local_ext & 0x0F) == 0x00) - name = "tmp451"; + conalert = i2c_smbus_read_byte_data(client, + TMP451_REG_CONALERT); + chen = i2c_smbus_read_byte_data(client, TMP461_REG_CHEN); + dfc = i2c_smbus_read_byte_data(client, TMP461_REG_DFC); + + if ((local_ext & 0x0F) == 0x00 && + (conalert & 0xf1) == 0x01 && + (chen & 0xfc) == 0x00 && + (dfc & 0xfc) == 0x00) { + if (address == 0x4c && !(chen & 0x03)) + name = "tmp451"; + else if (address >= 0x48 && address <= 0x4f) + name = "tmp461"; + } } if (!name) { /* identification failed */ @@ -1685,7 +1710,7 @@ static int lm90_init_client(struct i2c_client *client, struct lm90_data *data) lm90_set_convrate(client, data, 500); /* 500ms; 2Hz conversion rate */ /* Check Temperature Range Select */ - if (data->kind == adt7461 || data->kind == tmp451) { + if (data->flags & LM90_HAVE_EXTENDED_TEMP) { if (config & 0x04) data->flags |= LM90_FLAG_ADT7461_EXT; } diff --git a/drivers/hwmon/lm92.c b/drivers/hwmon/lm92.c index 9bf278cf0bd03b..5bae6eedcaf1f8 100644 --- a/drivers/hwmon/lm92.c +++ b/drivers/hwmon/lm92.c @@ -99,7 +99,7 @@ static const u8 regs[t_num_regs] = { struct lm92_data { struct i2c_client *client; struct mutex update_lock; - char valid; /* zero until following fields are valid */ + bool valid; /* false until following fields are valid */ unsigned long last_updated; /* in jiffies */ /* registers values */ @@ -126,7 +126,7 @@ static struct lm92_data *lm92_update_device(struct device *dev) i2c_smbus_read_word_swapped(client, regs[i]); } data->last_updated = jiffies; - data->valid = 1; + data->valid = true; } mutex_unlock(&data->update_lock); diff --git a/drivers/hwmon/lm93.c b/drivers/hwmon/lm93.c index 78d6dfaf145b0c..dc67bf954b2164 100644 --- a/drivers/hwmon/lm93.c +++ b/drivers/hwmon/lm93.c @@ -202,7 +202,7 @@ struct lm93_data { /* client update function */ void (*update)(struct lm93_data *, struct i2c_client *); - char valid; /* !=0 if following fields are valid */ + bool valid; /* true if following fields are valid */ /* register values, arranged by block read groups */ struct block1_t block1; @@ -917,7 +917,7 @@ static struct lm93_data *lm93_update_device(struct device *dev) data->update(data, client); data->last_updated = jiffies; - data->valid = 1; + data->valid = true; } mutex_unlock(&data->update_lock); diff --git a/drivers/hwmon/lm95241.c b/drivers/hwmon/lm95241.c index 00dbc170c8c6b7..8ea46ff20be5fa 100644 --- a/drivers/hwmon/lm95241.c +++ b/drivers/hwmon/lm95241.c @@ -78,7 +78,7 @@ struct lm95241_data { struct mutex update_lock; unsigned long last_updated; /* in jiffies */ unsigned long interval; /* in milli-seconds */ - char valid; /* zero until following fields are valid */ + bool valid; /* false until following fields are valid */ /* registers values */ u8 temp[ARRAY_SIZE(lm95241_reg_address)]; u8 status, config, model, trutherm; @@ -118,7 +118,7 @@ static struct lm95241_data *lm95241_update_device(struct device *dev) data->status = i2c_smbus_read_byte_data(client, LM95241_REG_R_STATUS); data->last_updated = jiffies; - data->valid = 1; + data->valid = true; } mutex_unlock(&data->update_lock); @@ -257,7 +257,7 @@ static int lm95241_write_temp(struct device *dev, u32 attr, int channel, else data->config &= ~R2DF_MASK; } - data->valid = 0; + data->valid = false; ret = i2c_smbus_write_byte_data(client, LM95241_REG_RW_CONFIG, data->config); break; @@ -273,7 +273,7 @@ static int lm95241_write_temp(struct device *dev, u32 attr, int channel, else data->config &= ~R2DF_MASK; } - data->valid = 0; + data->valid = false; ret = i2c_smbus_write_byte_data(client, LM95241_REG_RW_CONFIG, data->config); break; diff --git a/drivers/hwmon/ltc4151.c b/drivers/hwmon/ltc4151.c index 13b85367a21f44..e3ac004c1ed12a 100644 --- a/drivers/hwmon/ltc4151.c +++ b/drivers/hwmon/ltc4151.c @@ -77,7 +77,7 @@ static struct ltc4151_data *ltc4151_update_device(struct device *dev) data->regs[i] = val; } data->last_updated = jiffies; - data->valid = 1; + data->valid = true; } abort: mutex_unlock(&data->update_lock); diff --git a/drivers/hwmon/ltc4215.c b/drivers/hwmon/ltc4215.c index 1d18c212054fc2..fa43d26ddd4fd1 100644 --- a/drivers/hwmon/ltc4215.c +++ b/drivers/hwmon/ltc4215.c @@ -64,7 +64,7 @@ static struct ltc4215_data *ltc4215_update_device(struct device *dev) } data->last_updated = jiffies; - data->valid = 1; + data->valid = true; } mutex_unlock(&data->update_lock); diff --git a/drivers/hwmon/ltc4261.c b/drivers/hwmon/ltc4261.c index b81e9c3d297bc2..b91cc4fe84e538 100644 --- a/drivers/hwmon/ltc4261.c +++ b/drivers/hwmon/ltc4261.c @@ -73,13 +73,13 @@ static struct ltc4261_data *ltc4261_update_device(struct device *dev) "Failed to read ADC value: error %d\n", val); ret = ERR_PTR(val); - data->valid = 0; + data->valid = false; goto abort; } data->regs[i] = val; } data->last_updated = jiffies; - data->valid = 1; + data->valid = true; } abort: mutex_unlock(&data->update_lock); diff --git a/drivers/hwmon/max16065.c b/drivers/hwmon/max16065.c index ae3a6a7bdaa23d..daa5d8af1e69d8 100644 --- a/drivers/hwmon/max16065.c +++ b/drivers/hwmon/max16065.c @@ -166,7 +166,7 @@ static struct max16065_data *max16065_update_device(struct device *dev) = i2c_smbus_read_byte_data(client, MAX16065_FAULT(i)); data->last_updated = jiffies; - data->valid = 1; + data->valid = true; } mutex_unlock(&data->update_lock); return data; diff --git a/drivers/hwmon/max1619.c b/drivers/hwmon/max1619.c index 8bd941cae4d146..eae9e68027bcbe 100644 --- a/drivers/hwmon/max1619.c +++ b/drivers/hwmon/max1619.c @@ -79,7 +79,7 @@ enum temp_index { struct max1619_data { struct i2c_client *client; struct mutex update_lock; - char valid; /* zero until following fields are valid */ + bool valid; /* false until following fields are valid */ unsigned long last_updated; /* in jiffies */ /* registers values */ @@ -124,7 +124,7 @@ static struct max1619_data *max1619_update_device(struct device *dev) data->alarms ^= 0x02; data->last_updated = jiffies; - data->valid = 1; + data->valid = true; } mutex_unlock(&data->update_lock); diff --git a/drivers/hwmon/max1668.c b/drivers/hwmon/max1668.c index 5c41c78f045835..78688e6cb87d99 100644 --- a/drivers/hwmon/max1668.c +++ b/drivers/hwmon/max1668.c @@ -58,7 +58,7 @@ struct max1668_data { enum chips type; struct mutex update_lock; - char valid; /* !=0 if following fields are valid */ + bool valid; /* true if following fields are valid */ unsigned long last_updated; /* In jiffies */ /* 1x local and 4x remote */ @@ -120,7 +120,7 @@ static struct max1668_data *max1668_update_device(struct device *dev) data->alarms |= val; data->last_updated = jiffies; - data->valid = 1; + data->valid = true; abort: mutex_unlock(&data->update_lock); diff --git a/drivers/hwmon/max31722.c b/drivers/hwmon/max31722.c index 613338cbcb170f..4cf4fe6809a329 100644 --- a/drivers/hwmon/max31722.c +++ b/drivers/hwmon/max31722.c @@ -103,10 +103,16 @@ static int max31722_probe(struct spi_device *spi) static int max31722_remove(struct spi_device *spi) { struct max31722_data *data = spi_get_drvdata(spi); + int ret; hwmon_device_unregister(data->hwmon_dev); - return max31722_set_mode(data, MAX31722_MODE_STANDBY); + ret = max31722_set_mode(data, MAX31722_MODE_STANDBY); + if (ret) + /* There is nothing we can do about this ... */ + dev_warn(&spi->dev, "Failed to put device in stand-by mode\n"); + + return 0; } static int __maybe_unused max31722_suspend(struct device *dev) diff --git a/drivers/hwmon/max6620.c b/drivers/hwmon/max6620.c new file mode 100644 index 00000000000000..202b6438179d1f --- /dev/null +++ b/drivers/hwmon/max6620.c @@ -0,0 +1,514 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Hardware monitoring driver for Maxim MAX6620 + * + * Originally from L. Grunenberg. + * (C) 2012 by L. Grunenberg <contact@lgrunenberg.de> + * + * Copyright (c) 2021 Dell Inc. or its subsidiaries. All Rights Reserved. + * + * based on code written by : + * 2007 by Hans J. Koch <hjk@hansjkoch.de> + * John Morris <john.morris@spirentcom.com> + * Copyright (c) 2003 Spirent Communications + * and Claus Gindhart <claus.gindhart@kontron.com> + * + * This module has only been tested with the MAX6620 chip. + * + * The datasheet was last seen at: + * + * http://pdfserv.maxim-ic.com/en/ds/MAX6620.pdf + * + */ + +#include <linux/bits.h> +#include <linux/err.h> +#include <linux/hwmon.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/jiffies.h> +#include <linux/module.h> +#include <linux/slab.h> + +/* + * MAX 6620 registers + */ + +#define MAX6620_REG_CONFIG 0x00 +#define MAX6620_REG_FAULT 0x01 +#define MAX6620_REG_CONF_FAN0 0x02 +#define MAX6620_REG_CONF_FAN1 0x03 +#define MAX6620_REG_CONF_FAN2 0x04 +#define MAX6620_REG_CONF_FAN3 0x05 +#define MAX6620_REG_DYN_FAN0 0x06 +#define MAX6620_REG_DYN_FAN1 0x07 +#define MAX6620_REG_DYN_FAN2 0x08 +#define MAX6620_REG_DYN_FAN3 0x09 +#define MAX6620_REG_TACH0 0x10 +#define MAX6620_REG_TACH1 0x12 +#define MAX6620_REG_TACH2 0x14 +#define MAX6620_REG_TACH3 0x16 +#define MAX6620_REG_VOLT0 0x18 +#define MAX6620_REG_VOLT1 0x1A +#define MAX6620_REG_VOLT2 0x1C +#define MAX6620_REG_VOLT3 0x1E +#define MAX6620_REG_TAR0 0x20 +#define MAX6620_REG_TAR1 0x22 +#define MAX6620_REG_TAR2 0x24 +#define MAX6620_REG_TAR3 0x26 +#define MAX6620_REG_DAC0 0x28 +#define MAX6620_REG_DAC1 0x2A +#define MAX6620_REG_DAC2 0x2C +#define MAX6620_REG_DAC3 0x2E + +/* + * Config register bits + */ + +#define MAX6620_CFG_RUN BIT(7) +#define MAX6620_CFG_POR BIT(6) +#define MAX6620_CFG_TIMEOUT BIT(5) +#define MAX6620_CFG_FULLFAN BIT(4) +#define MAX6620_CFG_OSC BIT(3) +#define MAX6620_CFG_WD_MASK (BIT(2) | BIT(1)) +#define MAX6620_CFG_WD_2 BIT(1) +#define MAX6620_CFG_WD_6 BIT(2) +#define MAX6620_CFG_WD10 (BIT(2) | BIT(1)) +#define MAX6620_CFG_WD BIT(0) + +/* + * Failure status register bits + */ + +#define MAX6620_FAIL_TACH0 BIT(4) +#define MAX6620_FAIL_TACH1 BIT(5) +#define MAX6620_FAIL_TACH2 BIT(6) +#define MAX6620_FAIL_TACH3 BIT(7) +#define MAX6620_FAIL_MASK0 BIT(0) +#define MAX6620_FAIL_MASK1 BIT(1) +#define MAX6620_FAIL_MASK2 BIT(2) +#define MAX6620_FAIL_MASK3 BIT(3) + +#define MAX6620_CLOCK_FREQ 8192 /* Clock frequency in Hz */ +#define MAX6620_PULSE_PER_REV 2 /* Tachometer pulses per revolution */ + +/* Minimum and maximum values of the FAN-RPM */ +#define FAN_RPM_MIN 240 +#define FAN_RPM_MAX 30000 + +static const u8 config_reg[] = { + MAX6620_REG_CONF_FAN0, + MAX6620_REG_CONF_FAN1, + MAX6620_REG_CONF_FAN2, + MAX6620_REG_CONF_FAN3, +}; + +static const u8 dyn_reg[] = { + MAX6620_REG_DYN_FAN0, + MAX6620_REG_DYN_FAN1, + MAX6620_REG_DYN_FAN2, + MAX6620_REG_DYN_FAN3, +}; + +static const u8 tach_reg[] = { + MAX6620_REG_TACH0, + MAX6620_REG_TACH1, + MAX6620_REG_TACH2, + MAX6620_REG_TACH3, +}; + +static const u8 target_reg[] = { + MAX6620_REG_TAR0, + MAX6620_REG_TAR1, + MAX6620_REG_TAR2, + MAX6620_REG_TAR3, +}; + +/* + * Client data (each client gets its own) + */ + +struct max6620_data { + struct i2c_client *client; + struct mutex update_lock; + bool valid; /* false until following fields are valid */ + unsigned long last_updated; /* in jiffies */ + + /* register values */ + u8 fancfg[4]; + u8 fandyn[4]; + u8 fault; + u16 tach[4]; + u16 target[4]; +}; + +static u8 max6620_fan_div_from_reg(u8 val) +{ + return BIT((val & 0xE0) >> 5); +} + +static u16 max6620_fan_rpm_to_tach(u8 div, int rpm) +{ + return (60 * div * MAX6620_CLOCK_FREQ) / (rpm * MAX6620_PULSE_PER_REV); +} + +static int max6620_fan_tach_to_rpm(u8 div, u16 tach) +{ + return (60 * div * MAX6620_CLOCK_FREQ) / (tach * MAX6620_PULSE_PER_REV); +} + +static int max6620_update_device(struct device *dev) +{ + struct max6620_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + int i; + int ret = 0; + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ) || !data->valid) { + for (i = 0; i < 4; i++) { + ret = i2c_smbus_read_byte_data(client, config_reg[i]); + if (ret < 0) + goto error; + data->fancfg[i] = ret; + + ret = i2c_smbus_read_byte_data(client, dyn_reg[i]); + if (ret < 0) + goto error; + data->fandyn[i] = ret; + + ret = i2c_smbus_read_byte_data(client, tach_reg[i]); + if (ret < 0) + goto error; + data->tach[i] = (ret << 3) & 0x7f8; + ret = i2c_smbus_read_byte_data(client, tach_reg[i] + 1); + if (ret < 0) + goto error; + data->tach[i] |= (ret >> 5) & 0x7; + + ret = i2c_smbus_read_byte_data(client, target_reg[i]); + if (ret < 0) + goto error; + data->target[i] = (ret << 3) & 0x7f8; + ret = i2c_smbus_read_byte_data(client, target_reg[i] + 1); + if (ret < 0) + goto error; + data->target[i] |= (ret >> 5) & 0x7; + } + + /* + * Alarms are cleared on read in case the condition that + * caused the alarm is removed. Keep the value latched here + * for providing the register through different alarm files. + */ + ret = i2c_smbus_read_byte_data(client, MAX6620_REG_FAULT); + if (ret < 0) + goto error; + data->fault |= (ret >> 4) & (ret & 0x0F); + + data->last_updated = jiffies; + data->valid = true; + } + +error: + mutex_unlock(&data->update_lock); + return ret; +} + +static umode_t +max6620_is_visible(const void *data, enum hwmon_sensor_types type, u32 attr, + int channel) +{ + switch (type) { + case hwmon_fan: + switch (attr) { + case hwmon_fan_alarm: + case hwmon_fan_input: + return 0444; + case hwmon_fan_div: + case hwmon_fan_target: + return 0644; + default: + break; + } + break; + default: + break; + } + + return 0; +} + +static int +max6620_read(struct device *dev, enum hwmon_sensor_types type, u32 attr, + int channel, long *val) +{ + struct max6620_data *data; + struct i2c_client *client; + int ret; + u8 div; + u8 val1; + u8 val2; + + ret = max6620_update_device(dev); + if (ret < 0) + return ret; + data = dev_get_drvdata(dev); + client = data->client; + + switch (type) { + case hwmon_fan: + switch (attr) { + case hwmon_fan_alarm: + mutex_lock(&data->update_lock); + *val = !!(data->fault & BIT(channel)); + + /* Setting TACH count to re-enable fan fault detection */ + if (*val == 1) { + val1 = (data->target[channel] >> 3) & 0xff; + val2 = (data->target[channel] << 5) & 0xe0; + ret = i2c_smbus_write_byte_data(client, + target_reg[channel], val1); + if (ret < 0) { + mutex_unlock(&data->update_lock); + return ret; + } + ret = i2c_smbus_write_byte_data(client, + target_reg[channel] + 1, val2); + if (ret < 0) { + mutex_unlock(&data->update_lock); + return ret; + } + + data->fault &= ~BIT(channel); + } + mutex_unlock(&data->update_lock); + + break; + case hwmon_fan_div: + *val = max6620_fan_div_from_reg(data->fandyn[channel]); + break; + case hwmon_fan_input: + if (data->tach[channel] == 0) { + *val = 0; + } else { + div = max6620_fan_div_from_reg(data->fandyn[channel]); + *val = max6620_fan_tach_to_rpm(div, data->tach[channel]); + } + break; + case hwmon_fan_target: + if (data->target[channel] == 0) { + *val = 0; + } else { + div = max6620_fan_div_from_reg(data->fandyn[channel]); + *val = max6620_fan_tach_to_rpm(div, data->target[channel]); + } + break; + default: + return -EOPNOTSUPP; + } + break; + + default: + return -EOPNOTSUPP; + } + + return 0; +} + +static int +max6620_write(struct device *dev, enum hwmon_sensor_types type, u32 attr, + int channel, long val) +{ + struct max6620_data *data; + struct i2c_client *client; + int ret; + u8 div; + u16 tach; + u8 val1; + u8 val2; + + ret = max6620_update_device(dev); + if (ret < 0) + return ret; + data = dev_get_drvdata(dev); + client = data->client; + mutex_lock(&data->update_lock); + + switch (type) { + case hwmon_fan: + switch (attr) { + case hwmon_fan_div: + switch (val) { + case 1: + div = 0; + break; + case 2: + div = 1; + break; + case 4: + div = 2; + break; + case 8: + div = 3; + break; + case 16: + div = 4; + break; + case 32: + div = 5; + break; + default: + ret = -EINVAL; + goto error; + } + data->fandyn[channel] &= 0x1F; + data->fandyn[channel] |= div << 5; + ret = i2c_smbus_write_byte_data(client, dyn_reg[channel], + data->fandyn[channel]); + break; + case hwmon_fan_target: + val = clamp_val(val, FAN_RPM_MIN, FAN_RPM_MAX); + div = max6620_fan_div_from_reg(data->fandyn[channel]); + tach = max6620_fan_rpm_to_tach(div, val); + val1 = (tach >> 3) & 0xff; + val2 = (tach << 5) & 0xe0; + ret = i2c_smbus_write_byte_data(client, target_reg[channel], val1); + if (ret < 0) + break; + ret = i2c_smbus_write_byte_data(client, target_reg[channel] + 1, val2); + if (ret < 0) + break; + + /* Setting TACH count re-enables fan fault detection */ + data->fault &= ~BIT(channel); + + break; + default: + ret = -EOPNOTSUPP; + break; + } + break; + + default: + ret = -EOPNOTSUPP; + break; + } + +error: + mutex_unlock(&data->update_lock); + return ret; +} + +static const struct hwmon_channel_info *max6620_info[] = { + HWMON_CHANNEL_INFO(fan, + HWMON_F_INPUT | HWMON_F_DIV | HWMON_F_TARGET | HWMON_F_ALARM, + HWMON_F_INPUT | HWMON_F_DIV | HWMON_F_TARGET | HWMON_F_ALARM, + HWMON_F_INPUT | HWMON_F_DIV | HWMON_F_TARGET | HWMON_F_ALARM, + HWMON_F_INPUT | HWMON_F_DIV | HWMON_F_TARGET | HWMON_F_ALARM), + NULL +}; + +static const struct hwmon_ops max6620_hwmon_ops = { + .read = max6620_read, + .write = max6620_write, + .is_visible = max6620_is_visible, +}; + +static const struct hwmon_chip_info max6620_chip_info = { + .ops = &max6620_hwmon_ops, + .info = max6620_info, +}; + +static int max6620_init_client(struct max6620_data *data) +{ + struct i2c_client *client = data->client; + int config; + int err; + int i; + int reg; + + config = i2c_smbus_read_byte_data(client, MAX6620_REG_CONFIG); + if (config < 0) { + dev_err(&client->dev, "Error reading config, aborting.\n"); + return config; + } + + /* + * Set bit 4, disable other fans from going full speed on a fail + * failure. + */ + err = i2c_smbus_write_byte_data(client, MAX6620_REG_CONFIG, config | 0x10); + if (err < 0) { + dev_err(&client->dev, "Config write error, aborting.\n"); + return err; + } + + for (i = 0; i < 4; i++) { + reg = i2c_smbus_read_byte_data(client, config_reg[i]); + if (reg < 0) + return reg; + data->fancfg[i] = reg; + + /* Enable RPM mode */ + data->fancfg[i] |= 0xa8; + err = i2c_smbus_write_byte_data(client, config_reg[i], data->fancfg[i]); + if (err < 0) + return err; + + /* 2 counts (001) and Rate change 100 (0.125 secs) */ + data->fandyn[i] = 0x30; + err = i2c_smbus_write_byte_data(client, dyn_reg[i], data->fandyn[i]); + if (err < 0) + return err; + } + return 0; +} + +static int max6620_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct max6620_data *data; + struct device *hwmon_dev; + int err; + + data = devm_kzalloc(dev, sizeof(struct max6620_data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->client = client; + mutex_init(&data->update_lock); + + err = max6620_init_client(data); + if (err) + return err; + + hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name, + data, + &max6620_chip_info, + NULL); + + return PTR_ERR_OR_ZERO(hwmon_dev); +} + +static const struct i2c_device_id max6620_id[] = { + { "max6620", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, max6620_id); + +static struct i2c_driver max6620_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "max6620", + }, + .probe_new = max6620_probe, + .id_table = max6620_id, +}; + +module_i2c_driver(max6620_driver); + +MODULE_AUTHOR("Lucas Grunenberg"); +MODULE_DESCRIPTION("MAX6620 sensor driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/hwmon/max6639.c b/drivers/hwmon/max6639.c index b71899c641fa7a..ccc0f047bd446e 100644 --- a/drivers/hwmon/max6639.c +++ b/drivers/hwmon/max6639.c @@ -69,7 +69,7 @@ static const int rpm_ranges[] = { 2000, 4000, 8000, 16000 }; struct max6639_data { struct i2c_client *client; struct mutex update_lock; - char valid; /* !=0 if following fields are valid */ + bool valid; /* true if following fields are valid */ unsigned long last_updated; /* In jiffies */ /* Register values sampled regularly */ @@ -141,7 +141,7 @@ static struct max6639_data *max6639_update_device(struct device *dev) } data->last_updated = jiffies; - data->valid = 1; + data->valid = true; } abort: mutex_unlock(&data->update_lock); diff --git a/drivers/hwmon/max6642.c b/drivers/hwmon/max6642.c index 23d93142b0b315..699d265aae2e71 100644 --- a/drivers/hwmon/max6642.c +++ b/drivers/hwmon/max6642.c @@ -181,7 +181,7 @@ static struct max6642_data *max6642_update_device(struct device *dev) MAX6642_REG_R_STATUS); data->last_updated = jiffies; - data->valid = 1; + data->valid = true; } mutex_unlock(&data->update_lock); diff --git a/drivers/hwmon/mlxreg-fan.c b/drivers/hwmon/mlxreg-fan.c index 89fe7b9fe26be3..4a8becdb0d582e 100644 --- a/drivers/hwmon/mlxreg-fan.c +++ b/drivers/hwmon/mlxreg-fan.c @@ -12,7 +12,9 @@ #include <linux/regmap.h> #include <linux/thermal.h> -#define MLXREG_FAN_MAX_TACHO 12 +#define MLXREG_FAN_MAX_TACHO 14 +#define MLXREG_FAN_MAX_PWM 4 +#define MLXREG_FAN_PWM_NOT_CONNECTED 0xff #define MLXREG_FAN_MAX_STATE 10 #define MLXREG_FAN_MIN_DUTY 51 /* 20% */ #define MLXREG_FAN_MAX_DUTY 255 /* 100% */ @@ -61,6 +63,8 @@ MLXREG_FAN_MAX_DUTY, \ MLXREG_FAN_MAX_STATE)) +struct mlxreg_fan; + /* * struct mlxreg_fan_tacho - tachometer data (internal use): * @@ -79,12 +83,18 @@ struct mlxreg_fan_tacho { /* * struct mlxreg_fan_pwm - PWM data (internal use): * + * @fan: private data; * @connected: indicates if PWM is connected; * @reg: register offset; + * @cooling: cooling device levels; + * @cdev: cooling device; */ struct mlxreg_fan_pwm { + struct mlxreg_fan *fan; bool connected; u32 reg; + u8 cooling_levels[MLXREG_FAN_MAX_STATE + 1]; + struct thermal_cooling_device *cdev; }; /* @@ -97,20 +107,16 @@ struct mlxreg_fan_pwm { * @tachos_per_drwr - number of tachometers per drawer; * @samples: minimum allowed samples per pulse; * @divider: divider value for tachometer RPM calculation; - * @cooling: cooling device levels; - * @cdev: cooling device; */ struct mlxreg_fan { struct device *dev; void *regmap; struct mlxreg_core_platform_data *pdata; struct mlxreg_fan_tacho tacho[MLXREG_FAN_MAX_TACHO]; - struct mlxreg_fan_pwm pwm; + struct mlxreg_fan_pwm pwm[MLXREG_FAN_MAX_PWM]; int tachos_per_drwr; int samples; int divider; - u8 cooling_levels[MLXREG_FAN_MAX_STATE + 1]; - struct thermal_cooling_device *cdev; }; static int @@ -119,6 +125,7 @@ mlxreg_fan_read(struct device *dev, enum hwmon_sensor_types type, u32 attr, { struct mlxreg_fan *fan = dev_get_drvdata(dev); struct mlxreg_fan_tacho *tacho; + struct mlxreg_fan_pwm *pwm; u32 regval; int err; @@ -169,9 +176,10 @@ mlxreg_fan_read(struct device *dev, enum hwmon_sensor_types type, u32 attr, break; case hwmon_pwm: + pwm = &fan->pwm[channel]; switch (attr) { case hwmon_pwm_input: - err = regmap_read(fan->regmap, fan->pwm.reg, ®val); + err = regmap_read(fan->regmap, pwm->reg, ®val); if (err) return err; @@ -195,6 +203,7 @@ mlxreg_fan_write(struct device *dev, enum hwmon_sensor_types type, u32 attr, int channel, long val) { struct mlxreg_fan *fan = dev_get_drvdata(dev); + struct mlxreg_fan_pwm *pwm; switch (type) { case hwmon_pwm: @@ -203,7 +212,8 @@ mlxreg_fan_write(struct device *dev, enum hwmon_sensor_types type, u32 attr, if (val < MLXREG_FAN_MIN_DUTY || val > MLXREG_FAN_MAX_DUTY) return -EINVAL; - return regmap_write(fan->regmap, fan->pwm.reg, val); + pwm = &fan->pwm[channel]; + return regmap_write(fan->regmap, pwm->reg, val); default: return -EOPNOTSUPP; } @@ -235,7 +245,7 @@ mlxreg_fan_is_visible(const void *data, enum hwmon_sensor_types type, u32 attr, break; case hwmon_pwm: - if (!(((struct mlxreg_fan *)data)->pwm.connected)) + if (!(((struct mlxreg_fan *)data)->pwm[channel].connected)) return 0; switch (attr) { @@ -253,6 +263,13 @@ mlxreg_fan_is_visible(const void *data, enum hwmon_sensor_types type, u32 attr, return 0; } +static char *mlxreg_fan_name[] = { + "mlxreg_fan", + "mlxreg_fan1", + "mlxreg_fan2", + "mlxreg_fan3", +}; + static const struct hwmon_channel_info *mlxreg_fan_hwmon_info[] = { HWMON_CHANNEL_INFO(fan, HWMON_F_INPUT | HWMON_F_FAULT, @@ -266,8 +283,13 @@ static const struct hwmon_channel_info *mlxreg_fan_hwmon_info[] = { HWMON_F_INPUT | HWMON_F_FAULT, HWMON_F_INPUT | HWMON_F_FAULT, HWMON_F_INPUT | HWMON_F_FAULT, + HWMON_F_INPUT | HWMON_F_FAULT, + HWMON_F_INPUT | HWMON_F_FAULT, HWMON_F_INPUT | HWMON_F_FAULT), HWMON_CHANNEL_INFO(pwm, + HWMON_PWM_INPUT, + HWMON_PWM_INPUT, + HWMON_PWM_INPUT, HWMON_PWM_INPUT), NULL }; @@ -294,11 +316,12 @@ static int mlxreg_fan_get_cur_state(struct thermal_cooling_device *cdev, unsigned long *state) { - struct mlxreg_fan *fan = cdev->devdata; + struct mlxreg_fan_pwm *pwm = cdev->devdata; + struct mlxreg_fan *fan = pwm->fan; u32 regval; int err; - err = regmap_read(fan->regmap, fan->pwm.reg, ®val); + err = regmap_read(fan->regmap, pwm->reg, ®val); if (err) { dev_err(fan->dev, "Failed to query PWM duty\n"); return err; @@ -313,7 +336,8 @@ static int mlxreg_fan_set_cur_state(struct thermal_cooling_device *cdev, unsigned long state) { - struct mlxreg_fan *fan = cdev->devdata; + struct mlxreg_fan_pwm *pwm = cdev->devdata; + struct mlxreg_fan *fan = pwm->fan; unsigned long cur_state; int i, config = 0; u32 regval; @@ -337,11 +361,11 @@ static int mlxreg_fan_set_cur_state(struct thermal_cooling_device *cdev, config = 1; state -= MLXREG_FAN_MAX_STATE; for (i = 0; i < state; i++) - fan->cooling_levels[i] = state; + pwm->cooling_levels[i] = state; for (i = state; i <= MLXREG_FAN_MAX_STATE; i++) - fan->cooling_levels[i] = i; + pwm->cooling_levels[i] = i; - err = regmap_read(fan->regmap, fan->pwm.reg, ®val); + err = regmap_read(fan->regmap, pwm->reg, ®val); if (err) { dev_err(fan->dev, "Failed to query PWM duty\n"); return err; @@ -358,8 +382,8 @@ static int mlxreg_fan_set_cur_state(struct thermal_cooling_device *cdev, return -EINVAL; /* Normalize the state to the valid speed range. */ - state = fan->cooling_levels[state]; - err = regmap_write(fan->regmap, fan->pwm.reg, + state = pwm->cooling_levels[state]; + err = regmap_write(fan->regmap, pwm->reg, MLXREG_FAN_PWM_STATE2DUTY(state)); if (err) { dev_err(fan->dev, "Failed to write PWM duty\n"); @@ -390,6 +414,22 @@ static int mlxreg_fan_connect_verify(struct mlxreg_fan *fan, return !!(regval & data->bit); } +static int mlxreg_pwm_connect_verify(struct mlxreg_fan *fan, + struct mlxreg_core_data *data) +{ + u32 regval; + int err; + + err = regmap_read(fan->regmap, data->reg, ®val); + if (err) { + dev_err(fan->dev, "Failed to query pwm register 0x%08x\n", + data->reg); + return err; + } + + return regval != MLXREG_FAN_PWM_NOT_CONNECTED; +} + static int mlxreg_fan_speed_divider_get(struct mlxreg_fan *fan, struct mlxreg_core_data *data) { @@ -418,8 +458,8 @@ static int mlxreg_fan_speed_divider_get(struct mlxreg_fan *fan, static int mlxreg_fan_config(struct mlxreg_fan *fan, struct mlxreg_core_platform_data *pdata) { + int tacho_num = 0, tacho_avail = 0, pwm_num = 0, i; struct mlxreg_core_data *data = pdata->data; - int tacho_num = 0, tacho_avail = 0, i; bool configured = false; int err; @@ -449,13 +489,24 @@ static int mlxreg_fan_config(struct mlxreg_fan *fan, fan->tacho[tacho_num++].connected = true; tacho_avail++; } else if (strnstr(data->label, "pwm", sizeof(data->label))) { - if (fan->pwm.connected) { - dev_err(fan->dev, "duplicate pwm entry: %s\n", + if (pwm_num == MLXREG_FAN_MAX_TACHO) { + dev_err(fan->dev, "too many pwm entries: %s\n", data->label); return -EINVAL; } - fan->pwm.reg = data->reg; - fan->pwm.connected = true; + + /* Validate if more then one PWM is connected. */ + if (pwm_num) { + err = mlxreg_pwm_connect_verify(fan, data); + if (err < 0) + return err; + else if (!err) + continue; + } + + fan->pwm[pwm_num].reg = data->reg; + fan->pwm[pwm_num].connected = true; + pwm_num++; } else if (strnstr(data->label, "conf", sizeof(data->label))) { if (configured) { dev_err(fan->dev, "duplicate conf entry: %s\n", @@ -508,11 +559,32 @@ static int mlxreg_fan_config(struct mlxreg_fan *fan, fan->tachos_per_drwr = tacho_avail / drwr_avail; } - /* Init cooling levels per PWM state. */ - for (i = 0; i < MLXREG_FAN_SPEED_MIN_LEVEL; i++) - fan->cooling_levels[i] = MLXREG_FAN_SPEED_MIN_LEVEL; - for (i = MLXREG_FAN_SPEED_MIN_LEVEL; i <= MLXREG_FAN_MAX_STATE; i++) - fan->cooling_levels[i] = i; + return 0; +} + +static int mlxreg_fan_cooling_config(struct device *dev, struct mlxreg_fan *fan) +{ + int i, j; + + for (i = 0; i < MLXREG_FAN_MAX_PWM; i++) { + struct mlxreg_fan_pwm *pwm = &fan->pwm[i]; + + if (!pwm->connected) + continue; + pwm->fan = fan; + pwm->cdev = devm_thermal_of_cooling_device_register(dev, NULL, mlxreg_fan_name[i], + pwm, &mlxreg_fan_cooling_ops); + if (IS_ERR(pwm->cdev)) { + dev_err(dev, "Failed to register cooling device\n"); + return PTR_ERR(pwm->cdev); + } + + /* Init cooling levels per PWM state. */ + for (j = 0; j < MLXREG_FAN_SPEED_MIN_LEVEL; j++) + pwm->cooling_levels[j] = MLXREG_FAN_SPEED_MIN_LEVEL; + for (j = MLXREG_FAN_SPEED_MIN_LEVEL; j <= MLXREG_FAN_MAX_STATE; j++) + pwm->cooling_levels[j] = j; + } return 0; } @@ -551,16 +623,10 @@ static int mlxreg_fan_probe(struct platform_device *pdev) return PTR_ERR(hwm); } - if (IS_REACHABLE(CONFIG_THERMAL)) { - fan->cdev = devm_thermal_of_cooling_device_register(dev, - NULL, "mlxreg_fan", fan, &mlxreg_fan_cooling_ops); - if (IS_ERR(fan->cdev)) { - dev_err(dev, "Failed to register cooling device\n"); - return PTR_ERR(fan->cdev); - } - } + if (IS_REACHABLE(CONFIG_THERMAL)) + err = mlxreg_fan_cooling_config(dev, fan); - return 0; + return err; } static struct platform_driver mlxreg_fan_driver = { diff --git a/drivers/hwmon/nct6683.c b/drivers/hwmon/nct6683.c index 35f8635dc7f3ba..6a9f420e7d3233 100644 --- a/drivers/hwmon/nct6683.c +++ b/drivers/hwmon/nct6683.c @@ -174,6 +174,7 @@ superio_exit(int ioreg) #define NCT6683_CUSTOMER_ID_MITAC 0xa0e #define NCT6683_CUSTOMER_ID_MSI 0x201 #define NCT6683_CUSTOMER_ID_ASROCK 0xe2c +#define NCT6683_CUSTOMER_ID_ASROCK2 0xe1b #define NCT6683_REG_BUILD_YEAR 0x604 #define NCT6683_REG_BUILD_MONTH 0x605 @@ -1221,6 +1222,8 @@ static int nct6683_probe(struct platform_device *pdev) break; case NCT6683_CUSTOMER_ID_ASROCK: break; + case NCT6683_CUSTOMER_ID_ASROCK2: + break; default: if (!force) return -ENODEV; diff --git a/drivers/hwmon/nct6775.c b/drivers/hwmon/nct6775.c index 5bd15622a85f94..93dca471972ea3 100644 --- a/drivers/hwmon/nct6775.c +++ b/drivers/hwmon/nct6775.c @@ -55,6 +55,7 @@ #include <linux/dmi.h> #include <linux/io.h> #include <linux/nospec.h> +#include <linux/wmi.h> #include "lm75.h" #define USE_ALTERNATE @@ -132,31 +133,135 @@ MODULE_PARM_DESC(fan_debounce, "Enable debouncing for fan RPM signal"); #define SIO_ID_MASK 0xFFF8 enum pwm_enable { off, manual, thermal_cruise, speed_cruise, sf3, sf4 }; +enum sensor_access { access_direct, access_asuswmi }; -static inline void -superio_outb(int ioreg, int reg, int val) +struct nct6775_sio_data { + int sioreg; + int ld; + enum kinds kind; + enum sensor_access access; + + /* superio_() callbacks */ + void (*sio_outb)(struct nct6775_sio_data *sio_data, int reg, int val); + int (*sio_inb)(struct nct6775_sio_data *sio_data, int reg); + void (*sio_select)(struct nct6775_sio_data *sio_data, int ld); + int (*sio_enter)(struct nct6775_sio_data *sio_data); + void (*sio_exit)(struct nct6775_sio_data *sio_data); +}; + +#define ASUSWMI_MONITORING_GUID "466747A0-70EC-11DE-8A39-0800200C9A66" +#define ASUSWMI_METHODID_RSIO 0x5253494F +#define ASUSWMI_METHODID_WSIO 0x5753494F +#define ASUSWMI_METHODID_RHWM 0x5248574D +#define ASUSWMI_METHODID_WHWM 0x5748574D +#define ASUSWMI_UNSUPPORTED_METHOD 0xFFFFFFFE + +static int nct6775_asuswmi_evaluate_method(u32 method_id, u8 bank, u8 reg, u8 val, u32 *retval) +{ +#if IS_ENABLED(CONFIG_ACPI_WMI) + u32 args = bank | (reg << 8) | (val << 16); + struct acpi_buffer input = { (acpi_size) sizeof(args), &args }; + struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL }; + acpi_status status; + union acpi_object *obj; + u32 tmp = ASUSWMI_UNSUPPORTED_METHOD; + + status = wmi_evaluate_method(ASUSWMI_MONITORING_GUID, 0, + method_id, &input, &output); + + if (ACPI_FAILURE(status)) + return -EIO; + + obj = output.pointer; + if (obj && obj->type == ACPI_TYPE_INTEGER) + tmp = obj->integer.value; + + if (retval) + *retval = tmp; + + kfree(obj); + + if (tmp == ASUSWMI_UNSUPPORTED_METHOD) + return -ENODEV; + return 0; +#else + return -EOPNOTSUPP; +#endif +} + +static inline int nct6775_asuswmi_write(u8 bank, u8 reg, u8 val) +{ + return nct6775_asuswmi_evaluate_method(ASUSWMI_METHODID_WHWM, bank, + reg, val, NULL); +} + +static inline int nct6775_asuswmi_read(u8 bank, u8 reg, u8 *val) +{ + u32 ret, tmp = 0; + + ret = nct6775_asuswmi_evaluate_method(ASUSWMI_METHODID_RHWM, bank, + reg, 0, &tmp); + *val = tmp; + return ret; +} + +static int superio_wmi_inb(struct nct6775_sio_data *sio_data, int reg) +{ + int tmp = 0; + + nct6775_asuswmi_evaluate_method(ASUSWMI_METHODID_RSIO, sio_data->ld, + reg, 0, &tmp); + return tmp; +} + +static void superio_wmi_outb(struct nct6775_sio_data *sio_data, int reg, int val) { + nct6775_asuswmi_evaluate_method(ASUSWMI_METHODID_WSIO, sio_data->ld, + reg, val, NULL); +} + +static void superio_wmi_select(struct nct6775_sio_data *sio_data, int ld) +{ + sio_data->ld = ld; +} + +static int superio_wmi_enter(struct nct6775_sio_data *sio_data) +{ + return 0; +} + +static void superio_wmi_exit(struct nct6775_sio_data *sio_data) +{ +} + +static void superio_outb(struct nct6775_sio_data *sio_data, int reg, int val) +{ + int ioreg = sio_data->sioreg; + outb(reg, ioreg); outb(val, ioreg + 1); } -static inline int -superio_inb(int ioreg, int reg) +static int superio_inb(struct nct6775_sio_data *sio_data, int reg) { + int ioreg = sio_data->sioreg; + outb(reg, ioreg); return inb(ioreg + 1); } -static inline void -superio_select(int ioreg, int ld) +static void superio_select(struct nct6775_sio_data *sio_data, int ld) { + int ioreg = sio_data->sioreg; + outb(SIO_REG_LDSEL, ioreg); outb(ld, ioreg + 1); } -static inline int -superio_enter(int ioreg) +static int superio_enter(struct nct6775_sio_data *sio_data) { + int ioreg = sio_data->sioreg; + /* * Try to reserve <ioreg> and <ioreg + 1> for exclusive access. */ @@ -169,9 +274,10 @@ superio_enter(int ioreg) return 0; } -static inline void -superio_exit(int ioreg) +static void superio_exit(struct nct6775_sio_data *sio_data) { + int ioreg = sio_data->sioreg; + outb(0xaa, ioreg); outb(0x02, ioreg); outb(0x02, ioreg + 1); @@ -190,6 +296,7 @@ superio_exit(int ioreg) #define NCT6775_REG_BANK 0x4E #define NCT6775_REG_CONFIG 0x40 +#define NCT6775_PORT_CHIPID 0x58 /* * Not currently used: @@ -1215,11 +1322,10 @@ struct nct6775_data { u8 fandiv1; u8 fandiv2; u8 sio_reg_enable; -}; -struct nct6775_sio_data { - int sioreg; - enum kinds kind; + /* nct6775_*() callbacks */ + u16 (*read_value)(struct nct6775_data *data, u16 reg); + int (*write_value)(struct nct6775_data *data, u16 reg, u16 value); }; struct sensor_device_template { @@ -1407,6 +1513,54 @@ static bool is_word_sized(struct nct6775_data *data, u16 reg) return false; } +static inline void nct6775_wmi_set_bank(struct nct6775_data *data, u16 reg) +{ + u8 bank = reg >> 8; + + data->bank = bank; +} + +static u16 nct6775_wmi_read_value(struct nct6775_data *data, u16 reg) +{ + int res, err, word_sized = is_word_sized(data, reg); + u8 tmp = 0; + + nct6775_wmi_set_bank(data, reg); + + err = nct6775_asuswmi_read(data->bank, reg, &tmp); + if (err) + return 0; + + res = tmp; + if (word_sized) { + err = nct6775_asuswmi_read(data->bank, (reg & 0xff) + 1, &tmp); + if (err) + return 0; + + res = (res << 8) + tmp; + } + return res; +} + +static int nct6775_wmi_write_value(struct nct6775_data *data, u16 reg, u16 value) +{ + int res, word_sized = is_word_sized(data, reg); + + nct6775_wmi_set_bank(data, reg); + + if (word_sized) { + res = nct6775_asuswmi_write(data->bank, reg & 0xff, value >> 8); + if (res) + return res; + + res = nct6775_asuswmi_write(data->bank, (reg & 0xff) + 1, value); + } else { + res = nct6775_asuswmi_write(data->bank, reg & 0xff, value); + } + + return res; +} + /* * On older chips, only registers 0x50-0x5f are banked. * On more recent chips, all registers are banked. @@ -1459,7 +1613,7 @@ static u16 nct6775_read_temp(struct nct6775_data *data, u16 reg) { u16 res; - res = nct6775_read_value(data, reg); + res = data->read_value(data, reg); if (!is_word_sized(data, reg)) res <<= 8; @@ -1470,7 +1624,7 @@ static int nct6775_write_temp(struct nct6775_data *data, u16 reg, u16 value) { if (!is_word_sized(data, reg)) value >>= 8; - return nct6775_write_value(data, reg, value); + return data->write_value(data, reg, value); } /* This function assumes that the caller holds data->update_lock */ @@ -1480,24 +1634,24 @@ static void nct6775_write_fan_div(struct nct6775_data *data, int nr) switch (nr) { case 0: - reg = (nct6775_read_value(data, NCT6775_REG_FANDIV1) & 0x70) + reg = (data->read_value(data, NCT6775_REG_FANDIV1) & 0x70) | (data->fan_div[0] & 0x7); - nct6775_write_value(data, NCT6775_REG_FANDIV1, reg); + data->write_value(data, NCT6775_REG_FANDIV1, reg); break; case 1: - reg = (nct6775_read_value(data, NCT6775_REG_FANDIV1) & 0x7) + reg = (data->read_value(data, NCT6775_REG_FANDIV1) & 0x7) | ((data->fan_div[1] << 4) & 0x70); - nct6775_write_value(data, NCT6775_REG_FANDIV1, reg); + data->write_value(data, NCT6775_REG_FANDIV1, reg); break; case 2: - reg = (nct6775_read_value(data, NCT6775_REG_FANDIV2) & 0x70) + reg = (data->read_value(data, NCT6775_REG_FANDIV2) & 0x70) | (data->fan_div[2] & 0x7); - nct6775_write_value(data, NCT6775_REG_FANDIV2, reg); + data->write_value(data, NCT6775_REG_FANDIV2, reg); break; case 3: - reg = (nct6775_read_value(data, NCT6775_REG_FANDIV2) & 0x7) + reg = (data->read_value(data, NCT6775_REG_FANDIV2) & 0x7) | ((data->fan_div[3] << 4) & 0x70); - nct6775_write_value(data, NCT6775_REG_FANDIV2, reg); + data->write_value(data, NCT6775_REG_FANDIV2, reg); break; } } @@ -1512,10 +1666,10 @@ static void nct6775_update_fan_div(struct nct6775_data *data) { u8 i; - i = nct6775_read_value(data, NCT6775_REG_FANDIV1); + i = data->read_value(data, NCT6775_REG_FANDIV1); data->fan_div[0] = i & 0x7; data->fan_div[1] = (i & 0x70) >> 4; - i = nct6775_read_value(data, NCT6775_REG_FANDIV2); + i = data->read_value(data, NCT6775_REG_FANDIV2); data->fan_div[2] = i & 0x7; if (data->has_fan & BIT(3)) data->fan_div[3] = (i & 0x70) >> 4; @@ -1563,11 +1717,11 @@ static void nct6775_init_fan_common(struct device *dev, */ for (i = 0; i < ARRAY_SIZE(data->fan_min); i++) { if (data->has_fan_min & BIT(i)) { - reg = nct6775_read_value(data, data->REG_FAN_MIN[i]); + reg = data->read_value(data, data->REG_FAN_MIN[i]); if (!reg) - nct6775_write_value(data, data->REG_FAN_MIN[i], - data->has_fan_div ? 0xff - : 0xff1f); + data->write_value(data, data->REG_FAN_MIN[i], + data->has_fan_div ? 0xff + : 0xff1f); } } } @@ -1611,8 +1765,8 @@ static void nct6775_select_fan_div(struct device *dev, } if (fan_min != data->fan_min[nr]) { data->fan_min[nr] = fan_min; - nct6775_write_value(data, data->REG_FAN_MIN[nr], - fan_min); + data->write_value(data, data->REG_FAN_MIN[nr], + fan_min); } } data->fan_div[nr] = fan_div; @@ -1632,16 +1786,15 @@ static void nct6775_update_pwm(struct device *dev) continue; duty_is_dc = data->REG_PWM_MODE[i] && - (nct6775_read_value(data, data->REG_PWM_MODE[i]) + (data->read_value(data, data->REG_PWM_MODE[i]) & data->PWM_MODE_MASK[i]); data->pwm_mode[i] = !duty_is_dc; - fanmodecfg = nct6775_read_value(data, data->REG_FAN_MODE[i]); + fanmodecfg = data->read_value(data, data->REG_FAN_MODE[i]); for (j = 0; j < ARRAY_SIZE(data->REG_PWM); j++) { if (data->REG_PWM[j] && data->REG_PWM[j][i]) { - data->pwm[j][i] - = nct6775_read_value(data, - data->REG_PWM[j][i]); + data->pwm[j][i] = data->read_value(data, + data->REG_PWM[j][i]); } } @@ -1656,17 +1809,17 @@ static void nct6775_update_pwm(struct device *dev) u8 t = fanmodecfg & 0x0f; if (data->REG_TOLERANCE_H) { - t |= (nct6775_read_value(data, + t |= (data->read_value(data, data->REG_TOLERANCE_H[i]) & 0x70) >> 1; } data->target_speed_tolerance[i] = t; } data->temp_tolerance[1][i] = - nct6775_read_value(data, - data->REG_CRITICAL_TEMP_TOLERANCE[i]); + data->read_value(data, + data->REG_CRITICAL_TEMP_TOLERANCE[i]); - reg = nct6775_read_value(data, data->REG_TEMP_SEL[i]); + reg = data->read_value(data, data->REG_TEMP_SEL[i]); data->pwm_temp_sel[i] = reg & 0x1f; /* If fan can stop, report floor as 0 */ if (reg & 0x80) @@ -1675,7 +1828,7 @@ static void nct6775_update_pwm(struct device *dev) if (!data->REG_WEIGHT_TEMP_SEL[i]) continue; - reg = nct6775_read_value(data, data->REG_WEIGHT_TEMP_SEL[i]); + reg = data->read_value(data, data->REG_WEIGHT_TEMP_SEL[i]); data->pwm_weight_temp_sel[i] = reg & 0x1f; /* If weight is disabled, report weight source as 0 */ if (!(reg & 0x80)) @@ -1683,9 +1836,8 @@ static void nct6775_update_pwm(struct device *dev) /* Weight temp data */ for (j = 0; j < ARRAY_SIZE(data->weight_temp); j++) { - data->weight_temp[j][i] - = nct6775_read_value(data, - data->REG_WEIGHT_TEMP[j][i]); + data->weight_temp[j][i] = data->read_value(data, + data->REG_WEIGHT_TEMP[j][i]); } } } @@ -1703,10 +1855,10 @@ static void nct6775_update_pwm_limits(struct device *dev) for (j = 0; j < ARRAY_SIZE(data->fan_time); j++) { data->fan_time[j][i] = - nct6775_read_value(data, data->REG_FAN_TIME[j][i]); + data->read_value(data, data->REG_FAN_TIME[j][i]); } - reg_t = nct6775_read_value(data, data->REG_TARGET[i]); + reg_t = data->read_value(data, data->REG_TARGET[i]); /* Update only in matching mode or if never updated */ if (!data->target_temp[i] || data->pwm_enable[i] == thermal_cruise) @@ -1714,7 +1866,7 @@ static void nct6775_update_pwm_limits(struct device *dev) if (!data->target_speed[i] || data->pwm_enable[i] == speed_cruise) { if (data->REG_TOLERANCE_H) { - reg_t |= (nct6775_read_value(data, + reg_t |= (data->read_value(data, data->REG_TOLERANCE_H[i]) & 0x0f) << 8; } data->target_speed[i] = reg_t; @@ -1722,21 +1874,21 @@ static void nct6775_update_pwm_limits(struct device *dev) for (j = 0; j < data->auto_pwm_num; j++) { data->auto_pwm[i][j] = - nct6775_read_value(data, - NCT6775_AUTO_PWM(data, i, j)); + data->read_value(data, + NCT6775_AUTO_PWM(data, i, j)); data->auto_temp[i][j] = - nct6775_read_value(data, - NCT6775_AUTO_TEMP(data, i, j)); + data->read_value(data, + NCT6775_AUTO_TEMP(data, i, j)); } /* critical auto_pwm temperature data */ data->auto_temp[i][data->auto_pwm_num] = - nct6775_read_value(data, data->REG_CRITICAL_TEMP[i]); + data->read_value(data, data->REG_CRITICAL_TEMP[i]); switch (data->kind) { case nct6775: - reg = nct6775_read_value(data, - NCT6775_REG_CRITICAL_ENAB[i]); + reg = data->read_value(data, + NCT6775_REG_CRITICAL_ENAB[i]); data->auto_pwm[i][data->auto_pwm_num] = (reg & 0x02) ? 0xff : 0x00; break; @@ -1753,10 +1905,10 @@ static void nct6775_update_pwm_limits(struct device *dev) case nct6796: case nct6797: case nct6798: - reg = nct6775_read_value(data, + reg = data->read_value(data, data->REG_CRITICAL_PWM_ENABLE[i]); if (reg & data->CRITICAL_PWM_ENABLE_MASK) - reg = nct6775_read_value(data, + reg = data->read_value(data, data->REG_CRITICAL_PWM[i]); else reg = 0xff; @@ -1783,11 +1935,11 @@ static struct nct6775_data *nct6775_update_device(struct device *dev) if (!(data->have_in & BIT(i))) continue; - data->in[i][0] = nct6775_read_value(data, - data->REG_VIN[i]); - data->in[i][1] = nct6775_read_value(data, + data->in[i][0] = data->read_value(data, + data->REG_VIN[i]); + data->in[i][1] = data->read_value(data, data->REG_IN_MINMAX[0][i]); - data->in[i][2] = nct6775_read_value(data, + data->in[i][2] = data->read_value(data, data->REG_IN_MINMAX[1][i]); } @@ -1798,18 +1950,18 @@ static struct nct6775_data *nct6775_update_device(struct device *dev) if (!(data->has_fan & BIT(i))) continue; - reg = nct6775_read_value(data, data->REG_FAN[i]); + reg = data->read_value(data, data->REG_FAN[i]); data->rpm[i] = data->fan_from_reg(reg, data->fan_div[i]); if (data->has_fan_min & BIT(i)) - data->fan_min[i] = nct6775_read_value(data, + data->fan_min[i] = data->read_value(data, data->REG_FAN_MIN[i]); if (data->REG_FAN_PULSES[i]) { data->fan_pulses[i] = - (nct6775_read_value(data, - data->REG_FAN_PULSES[i]) + (data->read_value(data, + data->REG_FAN_PULSES[i]) >> data->FAN_PULSE_SHIFT[i]) & 0x03; } @@ -1825,15 +1977,14 @@ static struct nct6775_data *nct6775_update_device(struct device *dev) continue; for (j = 0; j < ARRAY_SIZE(data->reg_temp); j++) { if (data->reg_temp[j][i]) - data->temp[j][i] - = nct6775_read_temp(data, - data->reg_temp[j][i]); + data->temp[j][i] = nct6775_read_temp(data, + data->reg_temp[j][i]); } if (i >= NUM_TEMP_FIXED || !(data->have_temp_fixed & BIT(i))) continue; - data->temp_offset[i] - = nct6775_read_value(data, data->REG_TEMP_OFFSET[i]); + data->temp_offset[i] = data->read_value(data, + data->REG_TEMP_OFFSET[i]); } data->alarms = 0; @@ -1842,7 +1993,7 @@ static struct nct6775_data *nct6775_update_device(struct device *dev) if (!data->REG_ALARM[i]) continue; - alarm = nct6775_read_value(data, data->REG_ALARM[i]); + alarm = data->read_value(data, data->REG_ALARM[i]); data->alarms |= ((u64)alarm) << (i << 3); } @@ -1852,7 +2003,7 @@ static struct nct6775_data *nct6775_update_device(struct device *dev) if (!data->REG_BEEP[i]) continue; - beep = nct6775_read_value(data, data->REG_BEEP[i]); + beep = data->read_value(data, data->REG_BEEP[i]); data->beeps |= ((u64)beep) << (i << 3); } @@ -1894,8 +2045,8 @@ store_in_reg(struct device *dev, struct device_attribute *attr, const char *buf, return err; mutex_lock(&data->update_lock); data->in[nr][index] = in_to_reg(val, nr); - nct6775_write_value(data, data->REG_IN_MINMAX[index - 1][nr], - data->in[nr][index]); + data->write_value(data, data->REG_IN_MINMAX[index - 1][nr], + data->in[nr][index]); mutex_unlock(&data->update_lock); return count; } @@ -1919,8 +2070,8 @@ static int find_temp_source(struct nct6775_data *data, int index, int count) for (nr = 0; nr < count; nr++) { int src; - src = nct6775_read_value(data, - data->REG_TEMP_SOURCE[nr]) & 0x1f; + src = data->read_value(data, + data->REG_TEMP_SOURCE[nr]) & 0x1f; if (src == source) return nr; } @@ -1981,8 +2132,8 @@ store_beep(struct device *dev, struct device_attribute *attr, const char *buf, data->beeps |= (1ULL << nr); else data->beeps &= ~(1ULL << nr); - nct6775_write_value(data, data->REG_BEEP[regindex], - (data->beeps >> (regindex << 3)) & 0xff); + data->write_value(data, data->REG_BEEP[regindex], + (data->beeps >> (regindex << 3)) & 0xff); mutex_unlock(&data->update_lock); return count; } @@ -2037,8 +2188,8 @@ store_temp_beep(struct device *dev, struct device_attribute *attr, data->beeps |= (1ULL << bit); else data->beeps &= ~(1ULL << bit); - nct6775_write_value(data, data->REG_BEEP[regindex], - (data->beeps >> (regindex << 3)) & 0xff); + data->write_value(data, data->REG_BEEP[regindex], + (data->beeps >> (regindex << 3)) & 0xff); mutex_unlock(&data->update_lock); return count; @@ -2205,7 +2356,7 @@ write_div: } write_min: - nct6775_write_value(data, data->REG_FAN_MIN[nr], data->fan_min[nr]); + data->write_value(data, data->REG_FAN_MIN[nr], data->fan_min[nr]); mutex_unlock(&data->update_lock); return count; @@ -2241,10 +2392,10 @@ store_fan_pulses(struct device *dev, struct device_attribute *attr, mutex_lock(&data->update_lock); data->fan_pulses[nr] = val & 3; - reg = nct6775_read_value(data, data->REG_FAN_PULSES[nr]); + reg = data->read_value(data, data->REG_FAN_PULSES[nr]); reg &= ~(0x03 << data->FAN_PULSE_SHIFT[nr]); reg |= (val & 3) << data->FAN_PULSE_SHIFT[nr]; - nct6775_write_value(data, data->REG_FAN_PULSES[nr], reg); + data->write_value(data, data->REG_FAN_PULSES[nr], reg); mutex_unlock(&data->update_lock); return count; @@ -2378,7 +2529,7 @@ store_temp_offset(struct device *dev, struct device_attribute *attr, mutex_lock(&data->update_lock); data->temp_offset[nr] = val; - nct6775_write_value(data, data->REG_TEMP_OFFSET[nr], val); + data->write_value(data, data->REG_TEMP_OFFSET[nr], val); mutex_unlock(&data->update_lock); return count; @@ -2417,8 +2568,8 @@ store_temp_type(struct device *dev, struct device_attribute *attr, data->temp_type[nr] = val; vbit = 0x02 << nr; dbit = data->DIODE_MASK << nr; - vbat = nct6775_read_value(data, data->REG_VBAT) & ~vbit; - diode = nct6775_read_value(data, data->REG_DIODE) & ~dbit; + vbat = data->read_value(data, data->REG_VBAT) & ~vbit; + diode = data->read_value(data, data->REG_DIODE) & ~dbit; switch (val) { case 1: /* CPU diode (diode, current mode) */ vbat |= vbit; @@ -2430,8 +2581,8 @@ store_temp_type(struct device *dev, struct device_attribute *attr, case 4: /* thermistor */ break; } - nct6775_write_value(data, data->REG_VBAT, vbat); - nct6775_write_value(data, data->REG_DIODE, diode); + data->write_value(data, data->REG_VBAT, vbat); + data->write_value(data, data->REG_DIODE, diode); mutex_unlock(&data->update_lock); return count; @@ -2555,11 +2706,11 @@ store_pwm_mode(struct device *dev, struct device_attribute *attr, mutex_lock(&data->update_lock); data->pwm_mode[nr] = val; - reg = nct6775_read_value(data, data->REG_PWM_MODE[nr]); + reg = data->read_value(data, data->REG_PWM_MODE[nr]); reg &= ~data->PWM_MODE_MASK[nr]; if (!val) reg |= data->PWM_MODE_MASK[nr]; - nct6775_write_value(data, data->REG_PWM_MODE[nr], reg); + data->write_value(data, data->REG_PWM_MODE[nr], reg); mutex_unlock(&data->update_lock); return count; } @@ -2578,7 +2729,7 @@ show_pwm(struct device *dev, struct device_attribute *attr, char *buf) * Otherwise, show the configured value. */ if (index == 0 && data->pwm_enable[nr] > manual) - pwm = nct6775_read_value(data, data->REG_PWM_READ[nr]); + pwm = data->read_value(data, data->REG_PWM_READ[nr]); else pwm = data->pwm[index][nr]; @@ -2607,13 +2758,13 @@ store_pwm(struct device *dev, struct device_attribute *attr, const char *buf, mutex_lock(&data->update_lock); data->pwm[index][nr] = val; - nct6775_write_value(data, data->REG_PWM[index][nr], val); + data->write_value(data, data->REG_PWM[index][nr], val); if (index == 2) { /* floor: disable if val == 0 */ - reg = nct6775_read_value(data, data->REG_TEMP_SEL[nr]); + reg = data->read_value(data, data->REG_TEMP_SEL[nr]); reg &= 0x7f; if (val) reg |= 0x80; - nct6775_write_value(data, data->REG_TEMP_SEL[nr], reg); + data->write_value(data, data->REG_TEMP_SEL[nr], reg); } mutex_unlock(&data->update_lock); return count; @@ -2652,29 +2803,29 @@ static void pwm_update_registers(struct nct6775_data *data, int nr) case manual: break; case speed_cruise: - reg = nct6775_read_value(data, data->REG_FAN_MODE[nr]); + reg = data->read_value(data, data->REG_FAN_MODE[nr]); reg = (reg & ~data->tolerance_mask) | (data->target_speed_tolerance[nr] & data->tolerance_mask); - nct6775_write_value(data, data->REG_FAN_MODE[nr], reg); - nct6775_write_value(data, data->REG_TARGET[nr], + data->write_value(data, data->REG_FAN_MODE[nr], reg); + data->write_value(data, data->REG_TARGET[nr], data->target_speed[nr] & 0xff); if (data->REG_TOLERANCE_H) { reg = (data->target_speed[nr] >> 8) & 0x0f; reg |= (data->target_speed_tolerance[nr] & 0x38) << 1; - nct6775_write_value(data, - data->REG_TOLERANCE_H[nr], - reg); + data->write_value(data, + data->REG_TOLERANCE_H[nr], + reg); } break; case thermal_cruise: - nct6775_write_value(data, data->REG_TARGET[nr], - data->target_temp[nr]); + data->write_value(data, data->REG_TARGET[nr], + data->target_temp[nr]); fallthrough; default: - reg = nct6775_read_value(data, data->REG_FAN_MODE[nr]); + reg = data->read_value(data, data->REG_FAN_MODE[nr]); reg = (reg & ~data->tolerance_mask) | data->temp_tolerance[0][nr]; - nct6775_write_value(data, data->REG_FAN_MODE[nr], reg); + data->write_value(data, data->REG_FAN_MODE[nr], reg); break; } } @@ -2722,13 +2873,13 @@ store_pwm_enable(struct device *dev, struct device_attribute *attr, * turn off pwm control: select manual mode, set pwm to maximum */ data->pwm[0][nr] = 255; - nct6775_write_value(data, data->REG_PWM[0][nr], 255); + data->write_value(data, data->REG_PWM[0][nr], 255); } pwm_update_registers(data, nr); - reg = nct6775_read_value(data, data->REG_FAN_MODE[nr]); + reg = data->read_value(data, data->REG_FAN_MODE[nr]); reg &= 0x0f; reg |= pwm_enable_to_reg(val) << 4; - nct6775_write_value(data, data->REG_FAN_MODE[nr], reg); + data->write_value(data, data->REG_FAN_MODE[nr], reg); mutex_unlock(&data->update_lock); return count; } @@ -2781,10 +2932,10 @@ store_pwm_temp_sel(struct device *dev, struct device_attribute *attr, mutex_lock(&data->update_lock); src = data->temp_src[val - 1]; data->pwm_temp_sel[nr] = src; - reg = nct6775_read_value(data, data->REG_TEMP_SEL[nr]); + reg = data->read_value(data, data->REG_TEMP_SEL[nr]); reg &= 0xe0; reg |= src; - nct6775_write_value(data, data->REG_TEMP_SEL[nr], reg); + data->write_value(data, data->REG_TEMP_SEL[nr], reg); mutex_unlock(&data->update_lock); return count; @@ -2826,15 +2977,15 @@ store_pwm_weight_temp_sel(struct device *dev, struct device_attribute *attr, if (val) { src = data->temp_src[val - 1]; data->pwm_weight_temp_sel[nr] = src; - reg = nct6775_read_value(data, data->REG_WEIGHT_TEMP_SEL[nr]); + reg = data->read_value(data, data->REG_WEIGHT_TEMP_SEL[nr]); reg &= 0xe0; reg |= (src | 0x80); - nct6775_write_value(data, data->REG_WEIGHT_TEMP_SEL[nr], reg); + data->write_value(data, data->REG_WEIGHT_TEMP_SEL[nr], reg); } else { data->pwm_weight_temp_sel[nr] = 0; - reg = nct6775_read_value(data, data->REG_WEIGHT_TEMP_SEL[nr]); + reg = data->read_value(data, data->REG_WEIGHT_TEMP_SEL[nr]); reg &= 0x7f; - nct6775_write_value(data, data->REG_WEIGHT_TEMP_SEL[nr], reg); + data->write_value(data, data->REG_WEIGHT_TEMP_SEL[nr], reg); } mutex_unlock(&data->update_lock); @@ -2946,9 +3097,9 @@ store_temp_tolerance(struct device *dev, struct device_attribute *attr, if (index) pwm_update_registers(data, nr); else - nct6775_write_value(data, - data->REG_CRITICAL_TEMP_TOLERANCE[nr], - val); + data->write_value(data, + data->REG_CRITICAL_TEMP_TOLERANCE[nr], + val); mutex_unlock(&data->update_lock); return count; } @@ -3071,7 +3222,7 @@ store_weight_temp(struct device *dev, struct device_attribute *attr, mutex_lock(&data->update_lock); data->weight_temp[index][nr] = val; - nct6775_write_value(data, data->REG_WEIGHT_TEMP[index][nr], val); + data->write_value(data, data->REG_WEIGHT_TEMP[index][nr], val); mutex_unlock(&data->update_lock); return count; } @@ -3120,7 +3271,7 @@ store_fan_time(struct device *dev, struct device_attribute *attr, val = step_time_to_reg(val, data->pwm_mode[nr]); mutex_lock(&data->update_lock); data->fan_time[index][nr] = val; - nct6775_write_value(data, data->REG_FAN_TIME[index][nr], val); + data->write_value(data, data->REG_FAN_TIME[index][nr], val); mutex_unlock(&data->update_lock); return count; } @@ -3162,21 +3313,21 @@ store_auto_pwm(struct device *dev, struct device_attribute *attr, mutex_lock(&data->update_lock); data->auto_pwm[nr][point] = val; if (point < data->auto_pwm_num) { - nct6775_write_value(data, + data->write_value(data, NCT6775_AUTO_PWM(data, nr, point), data->auto_pwm[nr][point]); } else { switch (data->kind) { case nct6775: /* disable if needed (pwm == 0) */ - reg = nct6775_read_value(data, - NCT6775_REG_CRITICAL_ENAB[nr]); + reg = data->read_value(data, + NCT6775_REG_CRITICAL_ENAB[nr]); if (val) reg |= 0x02; else reg &= ~0x02; - nct6775_write_value(data, NCT6775_REG_CRITICAL_ENAB[nr], - reg); + data->write_value(data, NCT6775_REG_CRITICAL_ENAB[nr], + reg); break; case nct6776: break; /* always enabled, nothing to do */ @@ -3190,17 +3341,17 @@ store_auto_pwm(struct device *dev, struct device_attribute *attr, case nct6796: case nct6797: case nct6798: - nct6775_write_value(data, data->REG_CRITICAL_PWM[nr], + data->write_value(data, data->REG_CRITICAL_PWM[nr], val); - reg = nct6775_read_value(data, + reg = data->read_value(data, data->REG_CRITICAL_PWM_ENABLE[nr]); if (val == 255) reg &= ~data->CRITICAL_PWM_ENABLE_MASK; else reg |= data->CRITICAL_PWM_ENABLE_MASK; - nct6775_write_value(data, - data->REG_CRITICAL_PWM_ENABLE[nr], - reg); + data->write_value(data, + data->REG_CRITICAL_PWM_ENABLE[nr], + reg); break; } } @@ -3243,11 +3394,11 @@ store_auto_temp(struct device *dev, struct device_attribute *attr, mutex_lock(&data->update_lock); data->auto_temp[nr][point] = DIV_ROUND_CLOSEST(val, 1000); if (point < data->auto_pwm_num) { - nct6775_write_value(data, + data->write_value(data, NCT6775_AUTO_TEMP(data, nr, point), data->auto_temp[nr][point]); } else { - nct6775_write_value(data, data->REG_CRITICAL_TEMP[nr], + data->write_value(data, data->REG_CRITICAL_TEMP[nr], data->auto_temp[nr][point]); } mutex_unlock(&data->update_lock); @@ -3410,6 +3561,7 @@ clear_caseopen(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct nct6775_data *data = dev_get_drvdata(dev); + struct nct6775_sio_data *sio_data = dev_get_platdata(dev); int nr = to_sensor_dev_attr(attr)->index - INTRUSION_ALARM_BASE; unsigned long val; u8 reg; @@ -3425,19 +3577,19 @@ clear_caseopen(struct device *dev, struct device_attribute *attr, * The CR registers are the same for all chips, and not all chips * support clearing the caseopen status through "regular" registers. */ - ret = superio_enter(data->sioreg); + ret = sio_data->sio_enter(sio_data); if (ret) { count = ret; goto error; } - superio_select(data->sioreg, NCT6775_LD_ACPI); - reg = superio_inb(data->sioreg, NCT6775_REG_CR_CASEOPEN_CLR[nr]); + sio_data->sio_select(sio_data, NCT6775_LD_ACPI); + reg = sio_data->sio_inb(sio_data, NCT6775_REG_CR_CASEOPEN_CLR[nr]); reg |= NCT6775_CR_CASEOPEN_CLR_MASK[nr]; - superio_outb(data->sioreg, NCT6775_REG_CR_CASEOPEN_CLR[nr], reg); + sio_data->sio_outb(sio_data, NCT6775_REG_CR_CASEOPEN_CLR[nr], reg); reg &= ~NCT6775_CR_CASEOPEN_CLR_MASK[nr]; - superio_outb(data->sioreg, NCT6775_REG_CR_CASEOPEN_CLR[nr], reg); - superio_exit(data->sioreg); + sio_data->sio_outb(sio_data, NCT6775_REG_CR_CASEOPEN_CLR[nr], reg); + sio_data->sio_exit(sio_data); data->valid = false; /* Force cache refresh */ error: @@ -3506,9 +3658,9 @@ static inline void nct6775_init_device(struct nct6775_data *data) /* Start monitoring if needed */ if (data->REG_CONFIG) { - tmp = nct6775_read_value(data, data->REG_CONFIG); + tmp = data->read_value(data, data->REG_CONFIG); if (!(tmp & 0x01)) - nct6775_write_value(data, data->REG_CONFIG, tmp | 0x01); + data->write_value(data, data->REG_CONFIG, tmp | 0x01); } /* Enable temperature sensors if needed */ @@ -3517,18 +3669,18 @@ static inline void nct6775_init_device(struct nct6775_data *data) continue; if (!data->reg_temp_config[i]) continue; - tmp = nct6775_read_value(data, data->reg_temp_config[i]); + tmp = data->read_value(data, data->reg_temp_config[i]); if (tmp & 0x01) - nct6775_write_value(data, data->reg_temp_config[i], + data->write_value(data, data->reg_temp_config[i], tmp & 0xfe); } /* Enable VBAT monitoring if needed */ - tmp = nct6775_read_value(data, data->REG_VBAT); + tmp = data->read_value(data, data->REG_VBAT); if (!(tmp & 0x01)) - nct6775_write_value(data, data->REG_VBAT, tmp | 0x01); + data->write_value(data, data->REG_VBAT, tmp | 0x01); - diode = nct6775_read_value(data, data->REG_DIODE); + diode = data->read_value(data, data->REG_DIODE); for (i = 0; i < data->temp_fixed_num; i++) { if (!(data->have_temp_fixed & BIT(i))) @@ -3542,29 +3694,28 @@ static inline void nct6775_init_device(struct nct6775_data *data) } static void -nct6775_check_fan_inputs(struct nct6775_data *data) +nct6775_check_fan_inputs(struct nct6775_data *data, struct nct6775_sio_data *sio_data) { bool fan3pin = false, fan4pin = false, fan4min = false; bool fan5pin = false, fan6pin = false, fan7pin = false; bool pwm3pin = false, pwm4pin = false, pwm5pin = false; bool pwm6pin = false, pwm7pin = false; - int sioreg = data->sioreg; /* Store SIO_REG_ENABLE for use during resume */ - superio_select(sioreg, NCT6775_LD_HWM); - data->sio_reg_enable = superio_inb(sioreg, SIO_REG_ENABLE); + sio_data->sio_select(sio_data, NCT6775_LD_HWM); + data->sio_reg_enable = sio_data->sio_inb(sio_data, SIO_REG_ENABLE); /* fan4 and fan5 share some pins with the GPIO and serial flash */ if (data->kind == nct6775) { - int cr2c = superio_inb(sioreg, 0x2c); + int cr2c = sio_data->sio_inb(sio_data, 0x2c); fan3pin = cr2c & BIT(6); pwm3pin = cr2c & BIT(7); /* On NCT6775, fan4 shares pins with the fdc interface */ - fan4pin = !(superio_inb(sioreg, 0x2A) & 0x80); + fan4pin = !(sio_data->sio_inb(sio_data, 0x2A) & 0x80); } else if (data->kind == nct6776) { - bool gpok = superio_inb(sioreg, 0x27) & 0x80; + bool gpok = sio_data->sio_inb(sio_data, 0x27) & 0x80; const char *board_vendor, *board_name; board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR); @@ -3580,7 +3731,7 @@ nct6775_check_fan_inputs(struct nct6775_data *data) if (!strcmp(board_name, "Z77 Pro4-M")) { if ((data->sio_reg_enable & 0xe0) != 0xe0) { data->sio_reg_enable |= 0xe0; - superio_outb(sioreg, SIO_REG_ENABLE, + sio_data->sio_outb(sio_data, SIO_REG_ENABLE, data->sio_reg_enable); } } @@ -3589,32 +3740,32 @@ nct6775_check_fan_inputs(struct nct6775_data *data) if (data->sio_reg_enable & 0x80) fan3pin = gpok; else - fan3pin = !(superio_inb(sioreg, 0x24) & 0x40); + fan3pin = !(sio_data->sio_inb(sio_data, 0x24) & 0x40); if (data->sio_reg_enable & 0x40) fan4pin = gpok; else - fan4pin = superio_inb(sioreg, 0x1C) & 0x01; + fan4pin = sio_data->sio_inb(sio_data, 0x1C) & 0x01; if (data->sio_reg_enable & 0x20) fan5pin = gpok; else - fan5pin = superio_inb(sioreg, 0x1C) & 0x02; + fan5pin = sio_data->sio_inb(sio_data, 0x1C) & 0x02; fan4min = fan4pin; pwm3pin = fan3pin; } else if (data->kind == nct6106) { - int cr24 = superio_inb(sioreg, 0x24); + int cr24 = sio_data->sio_inb(sio_data, 0x24); fan3pin = !(cr24 & 0x80); pwm3pin = cr24 & 0x08; } else if (data->kind == nct6116) { - int cr1a = superio_inb(sioreg, 0x1a); - int cr1b = superio_inb(sioreg, 0x1b); - int cr24 = superio_inb(sioreg, 0x24); - int cr2a = superio_inb(sioreg, 0x2a); - int cr2b = superio_inb(sioreg, 0x2b); - int cr2f = superio_inb(sioreg, 0x2f); + int cr1a = sio_data->sio_inb(sio_data, 0x1a); + int cr1b = sio_data->sio_inb(sio_data, 0x1b); + int cr24 = sio_data->sio_inb(sio_data, 0x24); + int cr2a = sio_data->sio_inb(sio_data, 0x2a); + int cr2b = sio_data->sio_inb(sio_data, 0x2b); + int cr2f = sio_data->sio_inb(sio_data, 0x2f); fan3pin = !(cr2b & 0x10); fan4pin = (cr2b & 0x80) || // pin 1(2) @@ -3630,24 +3781,24 @@ nct6775_check_fan_inputs(struct nct6775_data *data) * NCT6779D, NCT6791D, NCT6792D, NCT6793D, NCT6795D, NCT6796D, * NCT6797D, NCT6798D */ - int cr1a = superio_inb(sioreg, 0x1a); - int cr1b = superio_inb(sioreg, 0x1b); - int cr1c = superio_inb(sioreg, 0x1c); - int cr1d = superio_inb(sioreg, 0x1d); - int cr2a = superio_inb(sioreg, 0x2a); - int cr2b = superio_inb(sioreg, 0x2b); - int cr2d = superio_inb(sioreg, 0x2d); - int cr2f = superio_inb(sioreg, 0x2f); + int cr1a = sio_data->sio_inb(sio_data, 0x1a); + int cr1b = sio_data->sio_inb(sio_data, 0x1b); + int cr1c = sio_data->sio_inb(sio_data, 0x1c); + int cr1d = sio_data->sio_inb(sio_data, 0x1d); + int cr2a = sio_data->sio_inb(sio_data, 0x2a); + int cr2b = sio_data->sio_inb(sio_data, 0x2b); + int cr2d = sio_data->sio_inb(sio_data, 0x2d); + int cr2f = sio_data->sio_inb(sio_data, 0x2f); bool dsw_en = cr2f & BIT(3); bool ddr4_en = cr2f & BIT(4); int cre0; int creb; int cred; - superio_select(sioreg, NCT6775_LD_12); - cre0 = superio_inb(sioreg, 0xe0); - creb = superio_inb(sioreg, 0xeb); - cred = superio_inb(sioreg, 0xed); + sio_data->sio_select(sio_data, NCT6775_LD_12); + cre0 = sio_data->sio_inb(sio_data, 0xe0); + creb = sio_data->sio_inb(sio_data, 0xeb); + cred = sio_data->sio_inb(sio_data, 0xed); fan3pin = !(cr1c & BIT(5)); fan4pin = !(cr1c & BIT(6)); @@ -3774,7 +3925,7 @@ static void add_temp_sensors(struct nct6775_data *data, const u16 *regp, if (!regp[i]) continue; - src = nct6775_read_value(data, regp[i]); + src = data->read_value(data, regp[i]); src &= 0x1f; if (!src || (*mask & BIT(src))) continue; @@ -3782,7 +3933,7 @@ static void add_temp_sensors(struct nct6775_data *data, const u16 *regp, continue; index = __ffs(*available); - nct6775_write_value(data, data->REG_TEMP_SOURCE[index], src); + data->write_value(data, data->REG_TEMP_SOURCE[index], src); *available &= ~BIT(index); *mask |= BIT(src); } @@ -3805,10 +3956,12 @@ static int nct6775_probe(struct platform_device *pdev) struct device *hwmon_dev; int num_attr_groups = 0; - res = platform_get_resource(pdev, IORESOURCE_IO, 0); - if (!devm_request_region(&pdev->dev, res->start, IOREGION_LENGTH, - DRVNAME)) - return -EBUSY; + if (sio_data->access == access_direct) { + res = platform_get_resource(pdev, IORESOURCE_IO, 0); + if (!devm_request_region(&pdev->dev, res->start, IOREGION_LENGTH, + DRVNAME)) + return -EBUSY; + } data = devm_kzalloc(&pdev->dev, sizeof(struct nct6775_data), GFP_KERNEL); @@ -3817,7 +3970,16 @@ static int nct6775_probe(struct platform_device *pdev) data->kind = sio_data->kind; data->sioreg = sio_data->sioreg; - data->addr = res->start; + + if (sio_data->access == access_direct) { + data->addr = res->start; + data->read_value = nct6775_read_value; + data->write_value = nct6775_write_value; + } else { + data->read_value = nct6775_wmi_read_value; + data->write_value = nct6775_wmi_write_value; + } + mutex_init(&data->update_lock); data->name = nct6775_device_names[data->kind]; data->bank = 0xff; /* Force initial bank selection */ @@ -4337,7 +4499,7 @@ static int nct6775_probe(struct platform_device *pdev) if (reg_temp[i] == 0) continue; - src = nct6775_read_value(data, data->REG_TEMP_SOURCE[i]) & 0x1f; + src = data->read_value(data, data->REG_TEMP_SOURCE[i]) & 0x1f; if (!src || (mask & BIT(src))) available |= BIT(i); @@ -4357,7 +4519,7 @@ static int nct6775_probe(struct platform_device *pdev) if (reg_temp[i] == 0) continue; - src = nct6775_read_value(data, data->REG_TEMP_SOURCE[i]) & 0x1f; + src = data->read_value(data, data->REG_TEMP_SOURCE[i]) & 0x1f; if (!src || (mask & BIT(src))) continue; @@ -4417,7 +4579,7 @@ static int nct6775_probe(struct platform_device *pdev) if (reg_temp_mon[i] == 0) continue; - src = nct6775_read_value(data, data->REG_TEMP_SEL[i]) & 0x1f; + src = data->read_value(data, data->REG_TEMP_SEL[i]) & 0x1f; if (!src) continue; @@ -4502,11 +4664,11 @@ static int nct6775_probe(struct platform_device *pdev) /* Initialize the chip */ nct6775_init_device(data); - err = superio_enter(sio_data->sioreg); + err = sio_data->sio_enter(sio_data); if (err) return err; - cr2a = superio_inb(sio_data->sioreg, 0x2a); + cr2a = sio_data->sio_inb(sio_data, 0x2a); switch (data->kind) { case nct6775: data->have_vid = (cr2a & 0x40); @@ -4532,17 +4694,17 @@ static int nct6775_probe(struct platform_device *pdev) * We can get the VID input values directly at logical device D 0xe3. */ if (data->have_vid) { - superio_select(sio_data->sioreg, NCT6775_LD_VID); - data->vid = superio_inb(sio_data->sioreg, 0xe3); + sio_data->sio_select(sio_data, NCT6775_LD_VID); + data->vid = sio_data->sio_inb(sio_data, 0xe3); data->vrm = vid_which_vrm(); } if (fan_debounce) { u8 tmp; - superio_select(sio_data->sioreg, NCT6775_LD_HWM); - tmp = superio_inb(sio_data->sioreg, - NCT6775_REG_CR_FAN_DEBOUNCE); + sio_data->sio_select(sio_data, NCT6775_LD_HWM); + tmp = sio_data->sio_inb(sio_data, + NCT6775_REG_CR_FAN_DEBOUNCE); switch (data->kind) { case nct6106: case nct6116: @@ -4565,15 +4727,15 @@ static int nct6775_probe(struct platform_device *pdev) tmp |= 0x7e; break; } - superio_outb(sio_data->sioreg, NCT6775_REG_CR_FAN_DEBOUNCE, + sio_data->sio_outb(sio_data, NCT6775_REG_CR_FAN_DEBOUNCE, tmp); dev_info(&pdev->dev, "Enabled fan debounce for chip %s\n", data->name); } - nct6775_check_fan_inputs(data); + nct6775_check_fan_inputs(data, sio_data); - superio_exit(sio_data->sioreg); + sio_data->sio_exit(sio_data); /* Read fan clock dividers immediately */ nct6775_init_fan_common(dev, data); @@ -4613,15 +4775,15 @@ static int nct6775_probe(struct platform_device *pdev) return PTR_ERR_OR_ZERO(hwmon_dev); } -static void nct6791_enable_io_mapping(int sioaddr) +static void nct6791_enable_io_mapping(struct nct6775_sio_data *sio_data) { int val; - val = superio_inb(sioaddr, NCT6791_REG_HM_IO_SPACE_LOCK_ENABLE); + val = sio_data->sio_inb(sio_data, NCT6791_REG_HM_IO_SPACE_LOCK_ENABLE); if (val & 0x10) { pr_info("Enabling hardware monitor logical device mappings.\n"); - superio_outb(sioaddr, NCT6791_REG_HM_IO_SPACE_LOCK_ENABLE, - val & ~0x10); + sio_data->sio_outb(sio_data, NCT6791_REG_HM_IO_SPACE_LOCK_ENABLE, + val & ~0x10); } } @@ -4630,10 +4792,10 @@ static int __maybe_unused nct6775_suspend(struct device *dev) struct nct6775_data *data = nct6775_update_device(dev); mutex_lock(&data->update_lock); - data->vbat = nct6775_read_value(data, data->REG_VBAT); + data->vbat = data->read_value(data, data->REG_VBAT); if (data->kind == nct6775) { - data->fandiv1 = nct6775_read_value(data, NCT6775_REG_FANDIV1); - data->fandiv2 = nct6775_read_value(data, NCT6775_REG_FANDIV2); + data->fandiv1 = data->read_value(data, NCT6775_REG_FANDIV1); + data->fandiv2 = data->read_value(data, NCT6775_REG_FANDIV2); } mutex_unlock(&data->update_lock); @@ -4643,47 +4805,47 @@ static int __maybe_unused nct6775_suspend(struct device *dev) static int __maybe_unused nct6775_resume(struct device *dev) { struct nct6775_data *data = dev_get_drvdata(dev); - int sioreg = data->sioreg; + struct nct6775_sio_data *sio_data = dev_get_platdata(dev); int i, j, err = 0; u8 reg; mutex_lock(&data->update_lock); data->bank = 0xff; /* Force initial bank selection */ - err = superio_enter(sioreg); + err = sio_data->sio_enter(sio_data); if (err) goto abort; - superio_select(sioreg, NCT6775_LD_HWM); - reg = superio_inb(sioreg, SIO_REG_ENABLE); + sio_data->sio_select(sio_data, NCT6775_LD_HWM); + reg = sio_data->sio_inb(sio_data, SIO_REG_ENABLE); if (reg != data->sio_reg_enable) - superio_outb(sioreg, SIO_REG_ENABLE, data->sio_reg_enable); + sio_data->sio_outb(sio_data, SIO_REG_ENABLE, data->sio_reg_enable); if (data->kind == nct6791 || data->kind == nct6792 || data->kind == nct6793 || data->kind == nct6795 || data->kind == nct6796 || data->kind == nct6797 || data->kind == nct6798) - nct6791_enable_io_mapping(sioreg); + nct6791_enable_io_mapping(sio_data); - superio_exit(sioreg); + sio_data->sio_exit(sio_data); /* Restore limits */ for (i = 0; i < data->in_num; i++) { if (!(data->have_in & BIT(i))) continue; - nct6775_write_value(data, data->REG_IN_MINMAX[0][i], - data->in[i][1]); - nct6775_write_value(data, data->REG_IN_MINMAX[1][i], - data->in[i][2]); + data->write_value(data, data->REG_IN_MINMAX[0][i], + data->in[i][1]); + data->write_value(data, data->REG_IN_MINMAX[1][i], + data->in[i][2]); } for (i = 0; i < ARRAY_SIZE(data->fan_min); i++) { if (!(data->has_fan_min & BIT(i))) continue; - nct6775_write_value(data, data->REG_FAN_MIN[i], - data->fan_min[i]); + data->write_value(data, data->REG_FAN_MIN[i], + data->fan_min[i]); } for (i = 0; i < NUM_TEMP; i++) { @@ -4697,10 +4859,10 @@ static int __maybe_unused nct6775_resume(struct device *dev) } /* Restore other settings */ - nct6775_write_value(data, data->REG_VBAT, data->vbat); + data->write_value(data, data->REG_VBAT, data->vbat); if (data->kind == nct6775) { - nct6775_write_value(data, NCT6775_REG_FANDIV1, data->fandiv1); - nct6775_write_value(data, NCT6775_REG_FANDIV2, data->fandiv2); + data->write_value(data, NCT6775_REG_FANDIV1, data->fandiv1); + data->write_value(data, NCT6775_REG_FANDIV2, data->fandiv2); } abort: @@ -4728,12 +4890,15 @@ static int __init nct6775_find(int sioaddr, struct nct6775_sio_data *sio_data) int err; int addr; - err = superio_enter(sioaddr); + sio_data->access = access_direct; + sio_data->sioreg = sioaddr; + + err = sio_data->sio_enter(sio_data); if (err) return err; - val = (superio_inb(sioaddr, SIO_REG_DEVID) << 8) | - superio_inb(sioaddr, SIO_REG_DEVID + 1); + val = (sio_data->sio_inb(sio_data, SIO_REG_DEVID) << 8) | + sio_data->sio_inb(sio_data, SIO_REG_DEVID + 1); if (force_id && val != 0xffff) val = force_id; @@ -4777,38 +4942,37 @@ static int __init nct6775_find(int sioaddr, struct nct6775_sio_data *sio_data) default: if (val != 0xffff) pr_debug("unsupported chip ID: 0x%04x\n", val); - superio_exit(sioaddr); + sio_data->sio_exit(sio_data); return -ENODEV; } /* We have a known chip, find the HWM I/O address */ - superio_select(sioaddr, NCT6775_LD_HWM); - val = (superio_inb(sioaddr, SIO_REG_ADDR) << 8) - | superio_inb(sioaddr, SIO_REG_ADDR + 1); + sio_data->sio_select(sio_data, NCT6775_LD_HWM); + val = (sio_data->sio_inb(sio_data, SIO_REG_ADDR) << 8) + | sio_data->sio_inb(sio_data, SIO_REG_ADDR + 1); addr = val & IOREGION_ALIGNMENT; if (addr == 0) { pr_err("Refusing to enable a Super-I/O device with a base I/O port 0\n"); - superio_exit(sioaddr); + sio_data->sio_exit(sio_data); return -ENODEV; } /* Activate logical device if needed */ - val = superio_inb(sioaddr, SIO_REG_ENABLE); + val = sio_data->sio_inb(sio_data, SIO_REG_ENABLE); if (!(val & 0x01)) { pr_warn("Forcibly enabling Super-I/O. Sensor is probably unusable.\n"); - superio_outb(sioaddr, SIO_REG_ENABLE, val | 0x01); + sio_data->sio_outb(sio_data, SIO_REG_ENABLE, val | 0x01); } if (sio_data->kind == nct6791 || sio_data->kind == nct6792 || sio_data->kind == nct6793 || sio_data->kind == nct6795 || sio_data->kind == nct6796 || sio_data->kind == nct6797 || sio_data->kind == nct6798) - nct6791_enable_io_mapping(sioaddr); + nct6791_enable_io_mapping(sio_data); - superio_exit(sioaddr); + sio_data->sio_exit(sio_data); pr_info("Found %s or compatible chip at %#x:%#x\n", nct6775_sio_names[sio_data->kind], sioaddr, addr); - sio_data->sioreg = sioaddr; return addr; } @@ -4821,6 +4985,34 @@ static int __init nct6775_find(int sioaddr, struct nct6775_sio_data *sio_data) */ static struct platform_device *pdev[2]; +static const char * const asus_wmi_boards[] = { + "ProArt X570-CREATOR WIFI", + "Pro WS X570-ACE", + "PRIME B360-PLUS", + "PRIME B460-PLUS", + "PRIME X570-PRO", + "ROG CROSSHAIR VIII DARK HERO", + "ROG CROSSHAIR VIII FORMULA", + "ROG CROSSHAIR VIII HERO", + "ROG CROSSHAIR VIII IMPACT", + "ROG STRIX B550-E GAMING", + "ROG STRIX B550-F GAMING", + "ROG STRIX B550-F GAMING (WI-FI)", + "ROG STRIX B550-I GAMING", + "ROG STRIX X570-F GAMING", + "ROG STRIX Z390-E GAMING", + "ROG STRIX Z490-I GAMING", + "TUF GAMING B550M-PLUS", + "TUF GAMING B550M-PLUS (WI-FI)", + "TUF GAMING B550-PLUS", + "TUF GAMING B550-PRO", + "TUF GAMING X570-PLUS", + "TUF GAMING X570-PLUS (WI-FI)", + "TUF GAMING X570-PRO (WI-FI)", + "TUF GAMING Z490-PLUS", + "TUF GAMING Z490-PLUS (WI-FI)", +}; + static int __init sensors_nct6775_init(void) { int i, err; @@ -4829,11 +5021,32 @@ static int __init sensors_nct6775_init(void) struct resource res; struct nct6775_sio_data sio_data; int sioaddr[2] = { 0x2e, 0x4e }; + enum sensor_access access = access_direct; + const char *board_vendor, *board_name; + u8 tmp; err = platform_driver_register(&nct6775_driver); if (err) return err; + board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR); + board_name = dmi_get_system_info(DMI_BOARD_NAME); + + if (board_name && board_vendor && + !strcmp(board_vendor, "ASUSTeK COMPUTER INC.")) { + err = match_string(asus_wmi_boards, ARRAY_SIZE(asus_wmi_boards), + board_name); + if (err >= 0) { + /* if reading chip id via WMI succeeds, use WMI */ + if (!nct6775_asuswmi_read(0, NCT6775_PORT_CHIPID, &tmp)) { + pr_info("Using Asus WMI to access %#x chip.\n", tmp); + access = access_asuswmi; + } else { + pr_err("Can't read ChipID by Asus WMI.\n"); + } + } + } + /* * initialize sio_data->kind and sio_data->sioreg. * @@ -4842,12 +5055,28 @@ static int __init sensors_nct6775_init(void) * nct6775 hardware monitor, and call probe() */ for (i = 0; i < ARRAY_SIZE(pdev); i++) { + sio_data.sio_outb = superio_outb; + sio_data.sio_inb = superio_inb; + sio_data.sio_select = superio_select; + sio_data.sio_enter = superio_enter; + sio_data.sio_exit = superio_exit; + address = nct6775_find(sioaddr[i], &sio_data); if (address <= 0) continue; found = true; + sio_data.access = access; + + if (access == access_asuswmi) { + sio_data.sio_outb = superio_wmi_outb; + sio_data.sio_inb = superio_wmi_inb; + sio_data.sio_select = superio_wmi_select; + sio_data.sio_enter = superio_wmi_enter; + sio_data.sio_exit = superio_wmi_exit; + } + pdev[i] = platform_device_alloc(DRVNAME, address); if (!pdev[i]) { err = -ENOMEM; @@ -4859,23 +5088,25 @@ static int __init sensors_nct6775_init(void) if (err) goto exit_device_put; - memset(&res, 0, sizeof(res)); - res.name = DRVNAME; - res.start = address + IOREGION_OFFSET; - res.end = address + IOREGION_OFFSET + IOREGION_LENGTH - 1; - res.flags = IORESOURCE_IO; + if (sio_data.access == access_direct) { + memset(&res, 0, sizeof(res)); + res.name = DRVNAME; + res.start = address + IOREGION_OFFSET; + res.end = address + IOREGION_OFFSET + IOREGION_LENGTH - 1; + res.flags = IORESOURCE_IO; + + err = acpi_check_resource_conflict(&res); + if (err) { + platform_device_put(pdev[i]); + pdev[i] = NULL; + continue; + } - err = acpi_check_resource_conflict(&res); - if (err) { - platform_device_put(pdev[i]); - pdev[i] = NULL; - continue; + err = platform_device_add_resources(pdev[i], &res, 1); + if (err) + goto exit_device_put; } - err = platform_device_add_resources(pdev[i], &res, 1); - if (err) - goto exit_device_put; - /* platform_device_add calls probe() */ err = platform_device_add(pdev[i]); if (err) diff --git a/drivers/hwmon/nct7802.c b/drivers/hwmon/nct7802.c index 604af2f6103a30..d1eeef02b6dc83 100644 --- a/drivers/hwmon/nct7802.c +++ b/drivers/hwmon/nct7802.c @@ -52,6 +52,23 @@ static const u8 REG_VOLTAGE_LIMIT_MSB_SHIFT[2][5] = { #define REG_VERSION_ID 0xff /* + * Resistance temperature detector (RTD) modes according to 7.2.32 Mode + * Selection Register + */ +#define RTD_MODE_CURRENT 0x1 +#define RTD_MODE_THERMISTOR 0x2 +#define RTD_MODE_VOLTAGE 0x3 + +#define MODE_RTD_MASK 0x3 +#define MODE_LTD_EN 0x40 + +/* + * Bit offset for sensors modes in REG_MODE. + * Valid for index 0..2, indicating RTD1..3. + */ +#define MODE_BIT_OFFSET_RTD(index) ((index) * 2) + +/* * Data structures and manipulation thereof */ @@ -1038,7 +1055,114 @@ static const struct regmap_config nct7802_regmap_config = { .volatile_reg = nct7802_regmap_is_volatile, }; -static int nct7802_init_chip(struct nct7802_data *data) +static int nct7802_get_channel_config(struct device *dev, + struct device_node *node, u8 *mode_mask, + u8 *mode_val) +{ + u32 reg; + const char *type_str, *md_str; + u8 md; + + if (!node->name || of_node_cmp(node->name, "channel")) + return 0; + + if (of_property_read_u32(node, "reg", ®)) { + dev_err(dev, "Could not read reg value for '%s'\n", + node->full_name); + return -EINVAL; + } + + if (reg > 3) { + dev_err(dev, "Invalid reg (%u) in '%s'\n", reg, + node->full_name); + return -EINVAL; + } + + if (reg == 0) { + if (!of_device_is_available(node)) + *mode_val &= ~MODE_LTD_EN; + else + *mode_val |= MODE_LTD_EN; + *mode_mask |= MODE_LTD_EN; + return 0; + } + + /* At this point we have reg >= 1 && reg <= 3 */ + + if (!of_device_is_available(node)) { + *mode_val &= ~(MODE_RTD_MASK << MODE_BIT_OFFSET_RTD(reg - 1)); + *mode_mask |= MODE_RTD_MASK << MODE_BIT_OFFSET_RTD(reg - 1); + return 0; + } + + if (of_property_read_string(node, "sensor-type", &type_str)) { + dev_err(dev, "No type for '%s'\n", node->full_name); + return -EINVAL; + } + + if (!strcmp(type_str, "voltage")) { + *mode_val |= (RTD_MODE_VOLTAGE & MODE_RTD_MASK) + << MODE_BIT_OFFSET_RTD(reg - 1); + *mode_mask |= MODE_RTD_MASK << MODE_BIT_OFFSET_RTD(reg - 1); + return 0; + } + + if (strcmp(type_str, "temperature")) { + dev_err(dev, "Invalid type '%s' for '%s'\n", type_str, + node->full_name); + return -EINVAL; + } + + if (reg == 3) { + /* RTD3 only supports thermistor mode */ + md = RTD_MODE_THERMISTOR; + } else { + if (of_property_read_string(node, "temperature-mode", + &md_str)) { + dev_err(dev, "No mode for '%s'\n", node->full_name); + return -EINVAL; + } + + if (!strcmp(md_str, "thermal-diode")) + md = RTD_MODE_CURRENT; + else if (!strcmp(md_str, "thermistor")) + md = RTD_MODE_THERMISTOR; + else { + dev_err(dev, "Invalid mode '%s' for '%s'\n", md_str, + node->full_name); + return -EINVAL; + } + } + + *mode_val |= (md & MODE_RTD_MASK) << MODE_BIT_OFFSET_RTD(reg - 1); + *mode_mask |= MODE_RTD_MASK << MODE_BIT_OFFSET_RTD(reg - 1); + + return 0; +} + +static int nct7802_configure_channels(struct device *dev, + struct nct7802_data *data) +{ + /* Enable local temperature sensor by default */ + u8 mode_mask = MODE_LTD_EN, mode_val = MODE_LTD_EN; + struct device_node *node; + int err; + + if (dev->of_node) { + for_each_child_of_node(dev->of_node, node) { + err = nct7802_get_channel_config(dev, node, &mode_mask, + &mode_val); + if (err) { + of_node_put(node); + return err; + } + } + } + + return regmap_update_bits(data->regmap, REG_MODE, mode_mask, mode_val); +} + +static int nct7802_init_chip(struct device *dev, struct nct7802_data *data) { int err; @@ -1047,8 +1171,7 @@ static int nct7802_init_chip(struct nct7802_data *data) if (err) return err; - /* Enable local temperature sensor */ - err = regmap_update_bits(data->regmap, REG_MODE, 0x40, 0x40); + err = nct7802_configure_channels(dev, data); if (err) return err; @@ -1074,7 +1197,7 @@ static int nct7802_probe(struct i2c_client *client) mutex_init(&data->access_lock); mutex_init(&data->in_alarm_lock); - ret = nct7802_init_chip(data); + ret = nct7802_init_chip(dev, data); if (ret < 0) return ret; diff --git a/drivers/hwmon/pc87360.c b/drivers/hwmon/pc87360.c index 6a9ba23cd302cb..0828436a1f6cfe 100644 --- a/drivers/hwmon/pc87360.c +++ b/drivers/hwmon/pc87360.c @@ -178,7 +178,7 @@ struct pc87360_data { struct device *hwmon_dev; struct mutex lock; struct mutex update_lock; - char valid; /* !=0 if following fields are valid */ + bool valid; /* true if following fields are valid */ unsigned long last_updated; /* In jiffies */ int address[3]; @@ -1673,7 +1673,7 @@ static struct pc87360_data *pc87360_update_device(struct device *dev) } data->last_updated = jiffies; - data->valid = 1; + data->valid = true; } mutex_unlock(&data->update_lock); diff --git a/drivers/hwmon/pmbus/ibm-cffps.c b/drivers/hwmon/pmbus/ibm-cffps.c index 53f7d1418bc907..e3294a1a54bb94 100644 --- a/drivers/hwmon/pmbus/ibm-cffps.c +++ b/drivers/hwmon/pmbus/ibm-cffps.c @@ -18,6 +18,7 @@ #include "pmbus.h" +#define CFFPS_MFG_ID_CMD 0x99 #define CFFPS_FRU_CMD 0x9A #define CFFPS_PN_CMD 0x9B #define CFFPS_HEADER_CMD 0x9C @@ -34,7 +35,7 @@ #define CFFPS_INPUT_HISTORY_SIZE 100 #define CFFPS_CCIN_REVISION GENMASK(7, 0) -#define CFFPS_CCIN_REVISION_LEGACY 0xde +#define CFFPS_CCIN_REVISION_LEGACY 0xde #define CFFPS_CCIN_VERSION GENMASK(15, 8) #define CFFPS_CCIN_VERSION_1 0x2b #define CFFPS_CCIN_VERSION_2 0x2e @@ -57,6 +58,7 @@ enum { CFFPS_DEBUGFS_INPUT_HISTORY = 0, + CFFPS_DEBUGFS_MFG_ID, CFFPS_DEBUGFS_FRU, CFFPS_DEBUGFS_PN, CFFPS_DEBUGFS_HEADER, @@ -158,6 +160,9 @@ static ssize_t ibm_cffps_debugfs_read(struct file *file, char __user *buf, switch (idx) { case CFFPS_DEBUGFS_INPUT_HISTORY: return ibm_cffps_read_input_history(psu, buf, count, ppos); + case CFFPS_DEBUGFS_MFG_ID: + cmd = CFFPS_MFG_ID_CMD; + break; case CFFPS_DEBUGFS_FRU: cmd = CFFPS_FRU_CMD; break; @@ -503,16 +508,27 @@ static int ibm_cffps_probe(struct i2c_client *client) u16 ccin_revision = 0; u16 ccin_version = CFFPS_CCIN_VERSION_1; int ccin = i2c_smbus_read_word_swapped(client, CFFPS_CCIN_CMD); + char mfg_id[I2C_SMBUS_BLOCK_MAX + 2] = { 0 }; if (ccin > 0) { ccin_revision = FIELD_GET(CFFPS_CCIN_REVISION, ccin); ccin_version = FIELD_GET(CFFPS_CCIN_VERSION, ccin); } + rc = i2c_smbus_read_block_data(client, PMBUS_MFR_ID, mfg_id); + if (rc < 0) { + dev_err(&client->dev, "Failed to read Manufacturer ID\n"); + return rc; + } + switch (ccin_version) { default: case CFFPS_CCIN_VERSION_1: - vs = cffps1; + if ((strncmp(mfg_id, "ACBE", 4) == 0) || + (strncmp(mfg_id, "ARTE", 4) == 0)) + vs = cffps1; + else + vs = cffps2; break; case CFFPS_CCIN_VERSION_2: vs = cffps2; @@ -564,6 +580,9 @@ static int ibm_cffps_probe(struct i2c_client *client) debugfs_create_file("input_history", 0444, ibm_cffps_dir, &psu->debugfs_entries[CFFPS_DEBUGFS_INPUT_HISTORY], &ibm_cffps_fops); + debugfs_create_file("mfg_id", 0444, ibm_cffps_dir, + &psu->debugfs_entries[CFFPS_DEBUGFS_MFG_ID], + &ibm_cffps_fops); debugfs_create_file("fru", 0444, ibm_cffps_dir, &psu->debugfs_entries[CFFPS_DEBUGFS_FRU], &ibm_cffps_fops); diff --git a/drivers/hwmon/pmbus/lm25066.c b/drivers/hwmon/pmbus/lm25066.c index d209e0afc2caab..8402b41520eb36 100644 --- a/drivers/hwmon/pmbus/lm25066.c +++ b/drivers/hwmon/pmbus/lm25066.c @@ -14,6 +14,7 @@ #include <linux/slab.h> #include <linux/i2c.h> #include <linux/log2.h> +#include <linux/of_device.h> #include "pmbus.h" enum chips { lm25056, lm25066, lm5064, lm5066, lm5066i }; @@ -51,26 +52,31 @@ struct __coeff { #define PSC_CURRENT_IN_L (PSC_NUM_CLASSES) #define PSC_POWER_L (PSC_NUM_CLASSES + 1) -static struct __coeff lm25066_coeff[6][PSC_NUM_CLASSES + 2] = { +static const struct __coeff lm25066_coeff[][PSC_NUM_CLASSES + 2] = { [lm25056] = { [PSC_VOLTAGE_IN] = { .m = 16296, + .b = 1343, .R = -2, }, [PSC_CURRENT_IN] = { .m = 13797, + .b = -1833, .R = -2, }, [PSC_CURRENT_IN_L] = { .m = 6726, + .b = -537, .R = -2, }, [PSC_POWER] = { .m = 5501, + .b = -2908, .R = -3, }, [PSC_POWER_L] = { .m = 26882, + .b = -5646, .R = -4, }, [PSC_TEMPERATURE] = { @@ -82,26 +88,32 @@ static struct __coeff lm25066_coeff[6][PSC_NUM_CLASSES + 2] = { [lm25066] = { [PSC_VOLTAGE_IN] = { .m = 22070, + .b = -1800, .R = -2, }, [PSC_VOLTAGE_OUT] = { .m = 22070, + .b = -1800, .R = -2, }, [PSC_CURRENT_IN] = { .m = 13661, + .b = -5200, .R = -2, }, [PSC_CURRENT_IN_L] = { - .m = 6852, + .m = 6854, + .b = -3100, .R = -2, }, [PSC_POWER] = { .m = 736, + .b = -3300, .R = -2, }, [PSC_POWER_L] = { .m = 369, + .b = -1900, .R = -2, }, [PSC_TEMPERATURE] = { @@ -111,26 +123,32 @@ static struct __coeff lm25066_coeff[6][PSC_NUM_CLASSES + 2] = { [lm5064] = { [PSC_VOLTAGE_IN] = { .m = 4611, + .b = -642, .R = -2, }, [PSC_VOLTAGE_OUT] = { .m = 4621, + .b = 423, .R = -2, }, [PSC_CURRENT_IN] = { .m = 10742, + .b = 1552, .R = -2, }, [PSC_CURRENT_IN_L] = { .m = 5456, + .b = 2118, .R = -2, }, [PSC_POWER] = { .m = 1204, + .b = 8524, .R = -3, }, [PSC_POWER_L] = { .m = 612, + .b = 11202, .R = -3, }, [PSC_TEMPERATURE] = { @@ -140,26 +158,32 @@ static struct __coeff lm25066_coeff[6][PSC_NUM_CLASSES + 2] = { [lm5066] = { [PSC_VOLTAGE_IN] = { .m = 4587, + .b = -1200, .R = -2, }, [PSC_VOLTAGE_OUT] = { .m = 4587, + .b = -2400, .R = -2, }, [PSC_CURRENT_IN] = { .m = 10753, + .b = -1200, .R = -2, }, [PSC_CURRENT_IN_L] = { .m = 5405, + .b = -600, .R = -2, }, [PSC_POWER] = { .m = 1204, + .b = -6000, .R = -3, }, [PSC_POWER_L] = { .m = 605, + .b = -8000, .R = -3, }, [PSC_TEMPERATURE] = { @@ -211,8 +235,6 @@ struct lm25066_data { #define to_lm25066_data(x) container_of(x, struct lm25066_data, info) -static const struct i2c_device_id lm25066_id[]; - static int lm25066_read_word_data(struct i2c_client *client, int page, int phase, int reg) { @@ -413,12 +435,35 @@ static int lm25066_write_word_data(struct i2c_client *client, int page, int reg, return ret; } +static const struct i2c_device_id lm25066_id[] = { + {"lm25056", lm25056}, + {"lm25066", lm25066}, + {"lm5064", lm5064}, + {"lm5066", lm5066}, + {"lm5066i", lm5066i}, + { } +}; +MODULE_DEVICE_TABLE(i2c, lm25066_id); + +static const struct of_device_id __maybe_unused lm25066_of_match[] = { + { .compatible = "ti,lm25056", .data = (void *)lm25056, }, + { .compatible = "ti,lm25066", .data = (void *)lm25066, }, + { .compatible = "ti,lm5064", .data = (void *)lm5064, }, + { .compatible = "ti,lm5066", .data = (void *)lm5066, }, + { .compatible = "ti,lm5066i", .data = (void *)lm5066i, }, + { }, +}; +MODULE_DEVICE_TABLE(of, lm25066_of_match); + static int lm25066_probe(struct i2c_client *client) { int config; + u32 shunt; struct lm25066_data *data; struct pmbus_driver_info *info; - struct __coeff *coeff; + const struct __coeff *coeff; + const struct of_device_id *of_id; + const struct i2c_device_id *i2c_id; if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_BYTE_DATA)) @@ -433,7 +478,14 @@ static int lm25066_probe(struct i2c_client *client) if (config < 0) return config; - data->id = i2c_match_id(lm25066_id, client)->driver_data; + i2c_id = i2c_match_id(lm25066_id, client); + + of_id = of_match_device(lm25066_of_match, &client->dev); + if (of_id && (unsigned long)of_id->data != i2c_id->driver_data) + dev_notice(&client->dev, "Device mismatch: %s in device tree, %s detected\n", + of_id->name, i2c_id->name); + + data->id = i2c_id->driver_data; info = &data->info; info->pages = 1; @@ -483,25 +535,25 @@ static int lm25066_probe(struct i2c_client *client) info->b[PSC_POWER] = coeff[PSC_POWER].b; } - return pmbus_do_probe(client, info); -} + /* + * Values in the TI datasheets are normalized for a 1mOhm sense + * resistor; assume that unless DT specifies a value explicitly. + */ + if (of_property_read_u32(client->dev.of_node, "shunt-resistor-micro-ohms", &shunt)) + shunt = 1000; -static const struct i2c_device_id lm25066_id[] = { - {"lm25056", lm25056}, - {"lm25066", lm25066}, - {"lm5064", lm5064}, - {"lm5066", lm5066}, - {"lm5066i", lm5066i}, - { } -}; + info->m[PSC_CURRENT_IN] = info->m[PSC_CURRENT_IN] * shunt / 1000; + info->m[PSC_POWER] = info->m[PSC_POWER] * shunt / 1000; -MODULE_DEVICE_TABLE(i2c, lm25066_id); + return pmbus_do_probe(client, info); +} /* This is the driver that will be inserted */ static struct i2c_driver lm25066_driver = { .driver = { .name = "lm25066", - }, + .of_match_table = of_match_ptr(lm25066_of_match), + }, .probe_new = lm25066_probe, .id_table = lm25066_id, }; diff --git a/drivers/hwmon/raspberrypi-hwmon.c b/drivers/hwmon/raspberrypi-hwmon.c index 805d396aa81b0f..573f53d5291218 100644 --- a/drivers/hwmon/raspberrypi-hwmon.c +++ b/drivers/hwmon/raspberrypi-hwmon.c @@ -53,7 +53,7 @@ static void rpi_firmware_get_throttled(struct rpi_hwmon_data *data) else dev_info(data->hwmon_dev, "Voltage normalised\n"); - sysfs_notify(&data->hwmon_dev->kobj, NULL, "in0_lcrit_alarm"); + hwmon_notify_event(data->hwmon_dev, hwmon_in, hwmon_in_lcrit_alarm, 0); } static void get_values_poll(struct work_struct *work) diff --git a/drivers/hwmon/sch5636.c b/drivers/hwmon/sch5636.c index a5cd4de36575e4..39ff1c9b1df543 100644 --- a/drivers/hwmon/sch5636.c +++ b/drivers/hwmon/sch5636.c @@ -56,7 +56,7 @@ struct sch5636_data { struct device *hwmon_dev; struct mutex update_lock; - char valid; /* !=0 if following fields are valid */ + bool valid; /* true if following fields are valid */ unsigned long last_updated; /* In jiffies */ u8 in[SCH5636_NO_INS]; u8 temp_val[SCH5636_NO_TEMPS]; @@ -140,7 +140,7 @@ static struct sch5636_data *sch5636_update_device(struct device *dev) } data->last_updated = jiffies; - data->valid = 1; + data->valid = true; abort: mutex_unlock(&data->update_lock); return ret; diff --git a/drivers/hwmon/sht21.c b/drivers/hwmon/sht21.c index 7d18ce5d383973..e23dbf287233a8 100644 --- a/drivers/hwmon/sht21.c +++ b/drivers/hwmon/sht21.c @@ -41,7 +41,7 @@ struct sht21 { unsigned long last_update; int temperature; int humidity; - char valid; + bool valid; char eic[18]; }; @@ -105,7 +105,7 @@ static int sht21_update_measurements(struct device *dev) goto out; sht21->humidity = sht21_rh_ticks_to_per_cent_mille(ret); sht21->last_update = jiffies; - sht21->valid = 1; + sht21->valid = true; } out: mutex_unlock(&sht21->lock); diff --git a/drivers/hwmon/sis5595.c b/drivers/hwmon/sis5595.c index 0c6741f949f5fd..018cb5a7651fba 100644 --- a/drivers/hwmon/sis5595.c +++ b/drivers/hwmon/sis5595.c @@ -172,7 +172,7 @@ struct sis5595_data { struct mutex lock; struct mutex update_lock; - char valid; /* !=0 if following fields are valid */ + bool valid; /* true if following fields are valid */ unsigned long last_updated; /* In jiffies */ char maxins; /* == 3 if temp enabled, otherwise == 4 */ u8 revision; /* Reg. value */ @@ -728,7 +728,7 @@ static struct sis5595_data *sis5595_update_device(struct device *dev) sis5595_read_value(data, SIS5595_REG_ALARM1) | (sis5595_read_value(data, SIS5595_REG_ALARM2) << 8); data->last_updated = jiffies; - data->valid = 1; + data->valid = true; } mutex_unlock(&data->update_lock); diff --git a/drivers/hwmon/smm665.c b/drivers/hwmon/smm665.c index 62906d9c4b86c5..8c4ed72e5d6845 100644 --- a/drivers/hwmon/smm665.c +++ b/drivers/hwmon/smm665.c @@ -265,7 +265,7 @@ static struct smm665_data *smm665_update_device(struct device *dev) data->adc[i] = val; } data->last_updated = jiffies; - data->valid = 1; + data->valid = true; } abort: mutex_unlock(&data->update_lock); diff --git a/drivers/hwmon/smsc47b397.c b/drivers/hwmon/smsc47b397.c index f928b8d4ff4892..c26d6eae0e4e4a 100644 --- a/drivers/hwmon/smsc47b397.c +++ b/drivers/hwmon/smsc47b397.c @@ -96,7 +96,7 @@ struct smsc47b397_data { struct mutex update_lock; unsigned long last_updated; /* in jiffies */ - int valid; + bool valid; /* register values */ u16 fan[4]; @@ -137,7 +137,7 @@ static struct smsc47b397_data *smsc47b397_update_device(struct device *dev) } data->last_updated = jiffies; - data->valid = 1; + data->valid = true; dev_dbg(dev, "... device update complete\n"); } diff --git a/drivers/hwmon/smsc47m192.c b/drivers/hwmon/smsc47m192.c index 03a87aa2017aed..a5db15c087ae1b 100644 --- a/drivers/hwmon/smsc47m192.c +++ b/drivers/hwmon/smsc47m192.c @@ -86,7 +86,7 @@ struct smsc47m192_data { struct i2c_client *client; const struct attribute_group *groups[3]; struct mutex update_lock; - char valid; /* !=0 if following fields are valid */ + bool valid; /* true if following fields are valid */ unsigned long last_updated; /* In jiffies */ u8 in[8]; /* Register value */ @@ -157,7 +157,7 @@ static struct smsc47m192_data *smsc47m192_update_device(struct device *dev) SMSC47M192_REG_ALARM2) << 8); data->last_updated = jiffies; - data->valid = 1; + data->valid = true; } mutex_unlock(&data->update_lock); diff --git a/drivers/hwmon/thmc50.c b/drivers/hwmon/thmc50.c index fde5e2d0825a4e..6a804f5036f477 100644 --- a/drivers/hwmon/thmc50.c +++ b/drivers/hwmon/thmc50.c @@ -62,7 +62,7 @@ struct thmc50_data { enum chips type; unsigned long last_updated; /* In jiffies */ char has_temp3; /* !=0 if it is ADM1022 in temp3 mode */ - char valid; /* !=0 if following fields are valid */ + bool valid; /* true if following fields are valid */ /* Register values */ s8 temp_input[3]; @@ -107,7 +107,7 @@ static struct thmc50_data *thmc50_update_device(struct device *dev) data->alarms = i2c_smbus_read_byte_data(client, THMC50_REG_INTR); data->last_updated = jiffies; - data->valid = 1; + data->valid = true; } mutex_unlock(&data->update_lock); diff --git a/drivers/hwmon/tmp103.c b/drivers/hwmon/tmp103.c index a7e202cc832350..5cab4436aa77d6 100644 --- a/drivers/hwmon/tmp103.c +++ b/drivers/hwmon/tmp103.c @@ -51,51 +51,92 @@ static inline u8 tmp103_mc_to_reg(int val) return DIV_ROUND_CLOSEST(val, 1000); } -static ssize_t tmp103_temp_show(struct device *dev, - struct device_attribute *attr, char *buf) +static int tmp103_read(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long *temp) { - struct sensor_device_attribute *sda = to_sensor_dev_attr(attr); struct regmap *regmap = dev_get_drvdata(dev); unsigned int regval; - int ret; + int err, reg; + + switch (attr) { + case hwmon_temp_input: + reg = TMP103_TEMP_REG; + break; + case hwmon_temp_min: + reg = TMP103_TLOW_REG; + break; + case hwmon_temp_max: + reg = TMP103_THIGH_REG; + break; + default: + return -EOPNOTSUPP; + } - ret = regmap_read(regmap, sda->index, ®val); - if (ret < 0) - return ret; + err = regmap_read(regmap, reg, ®val); + if (err < 0) + return err; + + *temp = tmp103_reg_to_mc(regval); - return sprintf(buf, "%d\n", tmp103_reg_to_mc(regval)); + return 0; } -static ssize_t tmp103_temp_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t count) +static int tmp103_write(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long temp) { - struct sensor_device_attribute *sda = to_sensor_dev_attr(attr); struct regmap *regmap = dev_get_drvdata(dev); - long val; - int ret; - - if (kstrtol(buf, 10, &val) < 0) - return -EINVAL; + int reg; + + switch (attr) { + case hwmon_temp_min: + reg = TMP103_TLOW_REG; + break; + case hwmon_temp_max: + reg = TMP103_THIGH_REG; + break; + default: + return -EOPNOTSUPP; + } - val = clamp_val(val, -55000, 127000); - ret = regmap_write(regmap, sda->index, tmp103_mc_to_reg(val)); - return ret ? ret : count; + temp = clamp_val(temp, -55000, 127000); + return regmap_write(regmap, reg, tmp103_mc_to_reg(temp)); } -static SENSOR_DEVICE_ATTR_RO(temp1_input, tmp103_temp, TMP103_TEMP_REG); +static umode_t tmp103_is_visible(const void *data, enum hwmon_sensor_types type, + u32 attr, int channel) +{ + if (type != hwmon_temp) + return 0; + + switch (attr) { + case hwmon_temp_input: + return 0444; + case hwmon_temp_min: + case hwmon_temp_max: + return 0644; + default: + return 0; + } +} -static SENSOR_DEVICE_ATTR_RW(temp1_min, tmp103_temp, TMP103_TLOW_REG); +static const struct hwmon_channel_info *tmp103_info[] = { + HWMON_CHANNEL_INFO(chip, + HWMON_C_REGISTER_TZ), + HWMON_CHANNEL_INFO(temp, + HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MIN), + NULL +}; -static SENSOR_DEVICE_ATTR_RW(temp1_max, tmp103_temp, TMP103_THIGH_REG); +static const struct hwmon_ops tmp103_hwmon_ops = { + .is_visible = tmp103_is_visible, + .read = tmp103_read, + .write = tmp103_write, +}; -static struct attribute *tmp103_attrs[] = { - &sensor_dev_attr_temp1_input.dev_attr.attr, - &sensor_dev_attr_temp1_min.dev_attr.attr, - &sensor_dev_attr_temp1_max.dev_attr.attr, - NULL +static const struct hwmon_chip_info tmp103_chip_info = { + .ops = &tmp103_hwmon_ops, + .info = tmp103_info, }; -ATTRIBUTE_GROUPS(tmp103); static bool tmp103_regmap_is_volatile(struct device *dev, unsigned int reg) { @@ -130,8 +171,10 @@ static int tmp103_probe(struct i2c_client *client) } i2c_set_clientdata(client, regmap); - hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name, - regmap, tmp103_groups); + hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name, + regmap, + &tmp103_chip_info, + NULL); return PTR_ERR_OR_ZERO(hwmon_dev); } diff --git a/drivers/hwmon/tmp401.c b/drivers/hwmon/tmp401.c index 9dc210b55e69b1..b31f4964f852d9 100644 --- a/drivers/hwmon/tmp401.c +++ b/drivers/hwmon/tmp401.c @@ -34,7 +34,7 @@ static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4c, 0x4d, 0x4e, 0x4f, I2C_CLIENT_END }; -enum chips { tmp401, tmp411, tmp431, tmp432, tmp435, tmp461 }; +enum chips { tmp401, tmp411, tmp431, tmp432, tmp435 }; /* * The TMP401 registers, note some registers have different addresses for @@ -56,7 +56,6 @@ static const u8 TMP401_TEMP_MSB_READ[7][2] = { { 0x20, 0x19 }, /* therm (crit) limit */ { 0x30, 0x34 }, /* lowest */ { 0x32, 0x36 }, /* highest */ - { 0, 0x11 }, /* offset */ }; static const u8 TMP401_TEMP_MSB_WRITE[7][2] = { @@ -66,7 +65,6 @@ static const u8 TMP401_TEMP_MSB_WRITE[7][2] = { { 0x20, 0x19 }, /* therm (crit) limit */ { 0x30, 0x34 }, /* lowest */ { 0x32, 0x36 }, /* highest */ - { 0, 0x11 }, /* offset */ }; static const u8 TMP432_TEMP_MSB_READ[4][3] = { @@ -123,7 +121,6 @@ static const struct i2c_device_id tmp401_id[] = { { "tmp431", tmp431 }, { "tmp432", tmp432 }, { "tmp435", tmp435 }, - { "tmp461", tmp461 }, { } }; MODULE_DEVICE_TABLE(i2c, tmp401_id); @@ -136,7 +133,7 @@ struct tmp401_data { struct i2c_client *client; const struct attribute_group *groups[3]; struct mutex update_lock; - char valid; /* zero until following fields are valid */ + bool valid; /* false until following fields are valid */ unsigned long last_updated; /* in jiffies */ enum chips kind; @@ -267,7 +264,7 @@ static struct tmp401_data *tmp401_update_device(struct device *dev) data->temp_crit_hyst = val; data->last_updated = jiffies; - data->valid = 1; + data->valid = true; } abort: @@ -413,7 +410,7 @@ static ssize_t reset_temp_history_store(struct device *dev, } mutex_lock(&data->update_lock); i2c_smbus_write_byte_data(client, TMP401_TEMP_MSB_WRITE[5][0], val); - data->valid = 0; + data->valid = false; mutex_unlock(&data->update_lock); return count; @@ -571,21 +568,6 @@ static const struct attribute_group tmp432_group = { }; /* - * Additional features of the TMP461 chip. - * The TMP461 temperature offset for the remote channel. - */ -static SENSOR_DEVICE_ATTR_2_RW(temp2_offset, temp, 6, 1); - -static struct attribute *tmp461_attributes[] = { - &sensor_dev_attr_temp2_offset.dev_attr.attr, - NULL -}; - -static const struct attribute_group tmp461_group = { - .attrs = tmp461_attributes, -}; - -/* * Begin non sysfs callback code (aka Real code) */ @@ -686,7 +668,7 @@ static int tmp401_detect(struct i2c_client *client, static int tmp401_probe(struct i2c_client *client) { static const char * const names[] = { - "TMP401", "TMP411", "TMP431", "TMP432", "TMP435", "TMP461" + "TMP401", "TMP411", "TMP431", "TMP432", "TMP435" }; struct device *dev = &client->dev; struct device *hwmon_dev; @@ -717,9 +699,6 @@ static int tmp401_probe(struct i2c_client *client) if (data->kind == tmp432) data->groups[groups++] = &tmp432_group; - if (data->kind == tmp461) - data->groups[groups++] = &tmp461_group; - hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name, data, data->groups); if (IS_ERR(hwmon_dev)) diff --git a/drivers/hwmon/tmp421.c b/drivers/hwmon/tmp421.c index b963a369c5ab30..1fd8d41d90c84a 100644 --- a/drivers/hwmon/tmp421.c +++ b/drivers/hwmon/tmp421.c @@ -29,15 +29,20 @@ static const unsigned short normal_i2c[] = { 0x2a, 0x4c, 0x4d, 0x4e, 0x4f, enum chips { tmp421, tmp422, tmp423, tmp441, tmp442 }; +#define MAX_CHANNELS 4 /* The TMP421 registers */ #define TMP421_STATUS_REG 0x08 #define TMP421_CONFIG_REG_1 0x09 +#define TMP421_CONFIG_REG_2 0x0A +#define TMP421_CONFIG_REG_REN(x) (BIT(3 + (x))) +#define TMP421_CONFIG_REG_REN_MASK GENMASK(6, 3) #define TMP421_CONVERSION_RATE_REG 0x0B +#define TMP421_N_FACTOR_REG_1 0x21 #define TMP421_MANUFACTURER_ID_REG 0xFE #define TMP421_DEVICE_ID_REG 0xFF -static const u8 TMP421_TEMP_MSB[4] = { 0x00, 0x01, 0x02, 0x03 }; -static const u8 TMP421_TEMP_LSB[4] = { 0x10, 0x11, 0x12, 0x13 }; +static const u8 TMP421_TEMP_MSB[MAX_CHANNELS] = { 0x00, 0x01, 0x02, 0x03 }; +static const u8 TMP421_TEMP_LSB[MAX_CHANNELS] = { 0x10, 0x11, 0x12, 0x13 }; /* Flags */ #define TMP421_CONFIG_SHUTDOWN 0x40 @@ -86,18 +91,24 @@ static const struct of_device_id __maybe_unused tmp421_of_match[] = { }; MODULE_DEVICE_TABLE(of, tmp421_of_match); +struct tmp421_channel { + const char *label; + bool enabled; + s16 temp; +}; + struct tmp421_data { struct i2c_client *client; struct mutex update_lock; - u32 temp_config[5]; + u32 temp_config[MAX_CHANNELS + 1]; struct hwmon_channel_info temp_info; const struct hwmon_channel_info *info[2]; struct hwmon_chip_info chip; - char valid; + bool valid; unsigned long last_updated; unsigned long channels; u8 config; - s16 temp[4]; + struct tmp421_channel channel[MAX_CHANNELS]; }; static int temp_from_raw(u16 reg, bool extended) @@ -132,28 +143,56 @@ static int tmp421_update_device(struct tmp421_data *data) ret = i2c_smbus_read_byte_data(client, TMP421_TEMP_MSB[i]); if (ret < 0) goto exit; - data->temp[i] = ret << 8; + data->channel[i].temp = ret << 8; ret = i2c_smbus_read_byte_data(client, TMP421_TEMP_LSB[i]); if (ret < 0) goto exit; - data->temp[i] |= ret; + data->channel[i].temp |= ret; } data->last_updated = jiffies; - data->valid = 1; + data->valid = true; } exit: mutex_unlock(&data->update_lock); if (ret < 0) { - data->valid = 0; + data->valid = false; return ret; } return 0; } +static int tmp421_enable_channels(struct tmp421_data *data) +{ + int err; + struct i2c_client *client = data->client; + struct device *dev = &client->dev; + int old = i2c_smbus_read_byte_data(client, TMP421_CONFIG_REG_2); + int new, i; + + if (old < 0) { + dev_err(dev, "error reading register, can't disable channels\n"); + return old; + } + + new = old & ~TMP421_CONFIG_REG_REN_MASK; + for (i = 0; i < data->channels; i++) + if (data->channel[i].enabled) + new |= TMP421_CONFIG_REG_REN(i); + + if (new == old) + return 0; + + err = i2c_smbus_write_byte_data(client, TMP421_CONFIG_REG_2, new); + if (err < 0) + dev_err(dev, "error writing register, can't disable channels\n"); + + return err; +} + static int tmp421_read(struct device *dev, enum hwmon_sensor_types type, u32 attr, int channel, long *val) { @@ -166,15 +205,22 @@ static int tmp421_read(struct device *dev, enum hwmon_sensor_types type, switch (attr) { case hwmon_temp_input: - *val = temp_from_raw(tmp421->temp[channel], + if (!tmp421->channel[channel].enabled) + return -ENODATA; + *val = temp_from_raw(tmp421->channel[channel].temp, tmp421->config & TMP421_CONFIG_RANGE); return 0; case hwmon_temp_fault: + if (!tmp421->channel[channel].enabled) + return -ENODATA; /* * Any of OPEN or /PVLD bits indicate a hardware mulfunction * and the conversion result may be incorrect */ - *val = !!(tmp421->temp[channel] & 0x03); + *val = !!(tmp421->channel[channel].temp & 0x03); + return 0; + case hwmon_temp_enable: + *val = tmp421->channel[channel].enabled; return 0; default: return -EOPNOTSUPP; @@ -182,6 +228,34 @@ static int tmp421_read(struct device *dev, enum hwmon_sensor_types type, } +static int tmp421_read_string(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, const char **str) +{ + struct tmp421_data *data = dev_get_drvdata(dev); + + *str = data->channel[channel].label; + + return 0; +} + +static int tmp421_write(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long val) +{ + struct tmp421_data *data = dev_get_drvdata(dev); + int ret; + + switch (attr) { + case hwmon_temp_enable: + data->channel[channel].enabled = val; + ret = tmp421_enable_channels(data); + break; + default: + ret = -EOPNOTSUPP; + } + + return ret; +} + static umode_t tmp421_is_visible(const void *data, enum hwmon_sensor_types type, u32 attr, int channel) { @@ -189,14 +263,19 @@ static umode_t tmp421_is_visible(const void *data, enum hwmon_sensor_types type, case hwmon_temp_fault: case hwmon_temp_input: return 0444; + case hwmon_temp_label: + return 0444; + case hwmon_temp_enable: + return 0644; default: return 0; } } -static int tmp421_init_client(struct i2c_client *client) +static int tmp421_init_client(struct tmp421_data *data) { int config, config_orig; + struct i2c_client *client = data->client; /* Set the conversion rate to 2 Hz */ i2c_smbus_write_byte_data(client, TMP421_CONVERSION_RATE_REG, 0x05); @@ -217,7 +296,7 @@ static int tmp421_init_client(struct i2c_client *client) i2c_smbus_write_byte_data(client, TMP421_CONFIG_REG_1, config); } - return 0; + return tmp421_enable_channels(data); } static int tmp421_detect(struct i2c_client *client, @@ -281,9 +360,78 @@ static int tmp421_detect(struct i2c_client *client, return 0; } +static int tmp421_probe_child_from_dt(struct i2c_client *client, + struct device_node *child, + struct tmp421_data *data) + +{ + struct device *dev = &client->dev; + u32 i; + s32 val; + int err; + + err = of_property_read_u32(child, "reg", &i); + if (err) { + dev_err(dev, "missing reg property of %pOFn\n", child); + return err; + } + + if (i >= data->channels) { + dev_err(dev, "invalid reg %d of %pOFn\n", i, child); + return -EINVAL; + } + + of_property_read_string(child, "label", &data->channel[i].label); + if (data->channel[i].label) + data->temp_config[i] |= HWMON_T_LABEL; + + data->channel[i].enabled = of_device_is_available(child); + + err = of_property_read_s32(child, "ti,n-factor", &val); + if (!err) { + if (i == 0) { + dev_err(dev, "n-factor can't be set for internal channel\n"); + return -EINVAL; + } + + if (val > 127 || val < -128) { + dev_err(dev, "n-factor for channel %d invalid (%d)\n", + i, val); + return -EINVAL; + } + i2c_smbus_write_byte_data(client, TMP421_N_FACTOR_REG_1 + i - 1, + val); + } + + return 0; +} + +static int tmp421_probe_from_dt(struct i2c_client *client, struct tmp421_data *data) +{ + struct device *dev = &client->dev; + const struct device_node *np = dev->of_node; + struct device_node *child; + int err; + + for_each_child_of_node(np, child) { + if (strcmp(child->name, "channel")) + continue; + + err = tmp421_probe_child_from_dt(client, child, data); + if (err) { + of_node_put(child); + return err; + } + } + + return 0; +} + static const struct hwmon_ops tmp421_ops = { .is_visible = tmp421_is_visible, .read = tmp421_read, + .read_string = tmp421_read_string, + .write = tmp421_write, }; static int tmp421_probe(struct i2c_client *client) @@ -305,12 +453,18 @@ static int tmp421_probe(struct i2c_client *client) data->channels = i2c_match_id(tmp421_id, client)->driver_data; data->client = client; - err = tmp421_init_client(client); + for (i = 0; i < data->channels; i++) { + data->temp_config[i] = HWMON_T_INPUT | HWMON_T_FAULT | HWMON_T_ENABLE; + data->channel[i].enabled = true; + } + + err = tmp421_probe_from_dt(client, data); if (err) return err; - for (i = 0; i < data->channels; i++) - data->temp_config[i] = HWMON_T_INPUT | HWMON_T_FAULT; + err = tmp421_init_client(data); + if (err) + return err; data->chip.ops = &tmp421_ops; data->chip.info = data->info; diff --git a/drivers/hwmon/via686a.c b/drivers/hwmon/via686a.c index a2eddd2c2538ac..55634110c2f962 100644 --- a/drivers/hwmon/via686a.c +++ b/drivers/hwmon/via686a.c @@ -304,7 +304,7 @@ struct via686a_data { const char *name; struct device *hwmon_dev; struct mutex update_lock; - char valid; /* !=0 if following fields are valid */ + bool valid; /* true if following fields are valid */ unsigned long last_updated; /* In jiffies */ u8 in[5]; /* Register value */ @@ -800,7 +800,7 @@ static struct via686a_data *via686a_update_device(struct device *dev) VIA686A_REG_ALARM1) | (via686a_read_value(data, VIA686A_REG_ALARM2) << 8); data->last_updated = jiffies; - data->valid = 1; + data->valid = true; } mutex_unlock(&data->update_lock); diff --git a/drivers/hwmon/vt1211.c b/drivers/hwmon/vt1211.c index 2fbdc532aed4a7..4a5e911d26ebf9 100644 --- a/drivers/hwmon/vt1211.c +++ b/drivers/hwmon/vt1211.c @@ -105,7 +105,7 @@ struct vt1211_data { struct device *hwmon_dev; struct mutex update_lock; - char valid; /* !=0 if following fields are valid */ + bool valid; /* true if following fields are valid */ unsigned long last_updated; /* In jiffies */ /* Register values */ @@ -319,7 +319,7 @@ static struct vt1211_data *vt1211_update_device(struct device *dev) vt1211_read8(data, VT1211_REG_ALARM1); data->last_updated = jiffies; - data->valid = 1; + data->valid = true; } mutex_unlock(&data->update_lock); diff --git a/drivers/hwmon/vt8231.c b/drivers/hwmon/vt8231.c index 6603727e15a02b..03275ac8ba72c9 100644 --- a/drivers/hwmon/vt8231.c +++ b/drivers/hwmon/vt8231.c @@ -145,7 +145,7 @@ struct vt8231_data { struct mutex update_lock; struct device *hwmon_dev; - char valid; /* !=0 if following fields are valid */ + bool valid; /* true if following fields are valid */ unsigned long last_updated; /* In jiffies */ u8 in[6]; /* Register value */ @@ -929,7 +929,7 @@ static struct vt8231_data *vt8231_update_device(struct device *dev) data->alarms &= ~0x80; data->last_updated = jiffies; - data->valid = 1; + data->valid = true; } mutex_unlock(&data->update_lock); diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c index 705a59663d42c5..af89b32a93a56b 100644 --- a/drivers/hwmon/w83627ehf.c +++ b/drivers/hwmon/w83627ehf.c @@ -320,7 +320,7 @@ struct w83627ehf_data { const u16 *scale_in; struct mutex update_lock; - char valid; /* !=0 if following fields are valid */ + bool valid; /* true if following fields are valid */ unsigned long last_updated; /* In jiffies */ /* Register values */ @@ -688,7 +688,7 @@ static struct w83627ehf_data *w83627ehf_update_device(struct device *dev) W83627EHF_REG_CASEOPEN_DET); data->last_updated = jiffies; - data->valid = 1; + data->valid = true; } mutex_unlock(&data->update_lock); @@ -1099,7 +1099,7 @@ clear_caseopen(struct device *dev, struct w83627ehf_data *data, int channel, reg = w83627ehf_read_value(data, W83627EHF_REG_CASEOPEN_CLR); w83627ehf_write_value(data, W83627EHF_REG_CASEOPEN_CLR, reg | mask); w83627ehf_write_value(data, W83627EHF_REG_CASEOPEN_CLR, reg & ~mask); - data->valid = 0; /* Force cache refresh */ + data->valid = false; /* Force cache refresh */ mutex_unlock(&data->update_lock); return 0; @@ -2004,7 +2004,7 @@ static int __maybe_unused w83627ehf_resume(struct device *dev) w83627ehf_write_value(data, W83627EHF_REG_VBAT, data->vbat); /* Force re-reading all values */ - data->valid = 0; + data->valid = false; mutex_unlock(&data->update_lock); return 0; diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c index a07b97400cba35..9be277156ed272 100644 --- a/drivers/hwmon/w83627hf.c +++ b/drivers/hwmon/w83627hf.c @@ -355,7 +355,7 @@ struct w83627hf_data { enum chips type; struct mutex update_lock; - char valid; /* !=0 if following fields are valid */ + bool valid; /* true if following fields are valid */ unsigned long last_updated; /* In jiffies */ u8 in[9]; /* Register value */ @@ -448,7 +448,7 @@ static int w83627hf_resume(struct device *dev) w83627hf_write_value(data, W83781D_REG_SCFG2, data->scfg2); /* Force re-reading all values */ - data->valid = 0; + data->valid = false; mutex_unlock(&data->update_lock); return 0; @@ -1905,7 +1905,7 @@ static struct w83627hf_data *w83627hf_update_device(struct device *dev) w83627hf_read_value(data, W83781D_REG_BEEP_INTS1) | w83627hf_read_value(data, W83781D_REG_BEEP_INTS3) << 16; data->last_updated = jiffies; - data->valid = 1; + data->valid = true; } mutex_unlock(&data->update_lock); diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c index ce8e2c10e854f1..b3579721265f75 100644 --- a/drivers/hwmon/w83781d.c +++ b/drivers/hwmon/w83781d.c @@ -203,7 +203,7 @@ struct w83781d_data { int isa_addr; struct mutex update_lock; - char valid; /* !=0 if following fields are valid */ + bool valid; /* true if following fields are valid */ unsigned long last_updated; /* In jiffies */ struct i2c_client *lm75[2]; /* for secondary I2C addresses */ @@ -1554,7 +1554,7 @@ static struct w83781d_data *w83781d_update_device(struct device *dev) W83781D_REG_BEEP_INTS3) << 16; } data->last_updated = jiffies; - data->valid = 1; + data->valid = true; } mutex_unlock(&data->update_lock); diff --git a/drivers/hwmon/w83791d.c b/drivers/hwmon/w83791d.c index 3c1be2c11fdf02..80a9a78d7ce98a 100644 --- a/drivers/hwmon/w83791d.c +++ b/drivers/hwmon/w83791d.c @@ -270,7 +270,7 @@ struct w83791d_data { struct device *hwmon_dev; struct mutex update_lock; - char valid; /* !=0 if following fields are valid */ + bool valid; /* true if following fields are valid */ unsigned long last_updated; /* In jiffies */ /* volts */ @@ -1596,7 +1596,7 @@ static struct w83791d_data *w83791d_update_device(struct device *dev) << 4; data->last_updated = jiffies; - data->valid = 1; + data->valid = true; } mutex_unlock(&data->update_lock); diff --git a/drivers/hwmon/w83792d.c b/drivers/hwmon/w83792d.c index 1f175f3813506d..31a1cdc308779a 100644 --- a/drivers/hwmon/w83792d.c +++ b/drivers/hwmon/w83792d.c @@ -261,7 +261,7 @@ struct w83792d_data { struct device *hwmon_dev; struct mutex update_lock; - char valid; /* !=0 if following fields are valid */ + bool valid; /* true if following fields are valid */ unsigned long last_updated; /* In jiffies */ u8 in[9]; /* Register value */ @@ -740,7 +740,7 @@ intrusion0_alarm_store(struct device *dev, struct device_attribute *attr, mutex_lock(&data->update_lock); reg = w83792d_read_value(client, W83792D_REG_CHASSIS_CLR); w83792d_write_value(client, W83792D_REG_CHASSIS_CLR, reg | 0x80); - data->valid = 0; /* Force cache refresh */ + data->valid = false; /* Force cache refresh */ mutex_unlock(&data->update_lock); return count; @@ -1589,7 +1589,7 @@ static struct w83792d_data *w83792d_update_device(struct device *dev) } data->last_updated = jiffies; - data->valid = 1; + data->valid = true; } mutex_unlock(&data->update_lock); diff --git a/drivers/hwmon/w83793.c b/drivers/hwmon/w83793.c index 1d2854de1cfc96..0a65d164c8f094 100644 --- a/drivers/hwmon/w83793.c +++ b/drivers/hwmon/w83793.c @@ -204,7 +204,7 @@ static inline s8 TEMP_TO_REG(long val, s8 min, s8 max) struct w83793_data { struct device *hwmon_dev; struct mutex update_lock; - char valid; /* !=0 if following fields are valid */ + bool valid; /* true if following fields are valid */ unsigned long last_updated; /* In jiffies */ unsigned long last_nonvolatile; /* In jiffies, last time we update the * nonvolatile registers @@ -452,7 +452,7 @@ store_chassis_clear(struct device *dev, mutex_lock(&data->update_lock); reg = w83793_read_value(client, W83793_REG_CLR_CHASSIS); w83793_write_value(client, W83793_REG_CLR_CHASSIS, reg | 0x80); - data->valid = 0; /* Force cache refresh */ + data->valid = false; /* Force cache refresh */ mutex_unlock(&data->update_lock); return count; } @@ -2077,7 +2077,7 @@ static struct w83793_data *w83793_update_device(struct device *dev) data->vid[1] = w83793_read_value(client, W83793_REG_VID_INB); w83793_update_nonvolatile(dev); data->last_updated = jiffies; - data->valid = 1; + data->valid = true; END: mutex_unlock(&data->update_lock); diff --git a/drivers/hwmon/w83795.c b/drivers/hwmon/w83795.c index 621b05afa8373d..45b12c4287dfaf 100644 --- a/drivers/hwmon/w83795.c +++ b/drivers/hwmon/w83795.c @@ -379,7 +379,7 @@ struct w83795_data { u8 enable_beep; u8 beeps[6]; /* Register value */ - char valid; + bool valid; char valid_limits; char valid_pwm_config; }; @@ -684,7 +684,7 @@ static struct w83795_data *w83795_update_device(struct device *dev) tmp & ~ALARM_CTRL_RTSACS); data->last_updated = jiffies; - data->valid = 1; + data->valid = true; END: mutex_unlock(&data->update_lock); @@ -764,7 +764,7 @@ store_chassis_clear(struct device *dev, /* Clear status and force cache refresh */ w83795_read(client, W83795_REG_ALARM(5)); - data->valid = 0; + data->valid = false; mutex_unlock(&data->update_lock); return count; } diff --git a/drivers/hwmon/w83l785ts.c b/drivers/hwmon/w83l785ts.c index 656a77102ca6f4..a41f989d66e270 100644 --- a/drivers/hwmon/w83l785ts.c +++ b/drivers/hwmon/w83l785ts.c @@ -98,7 +98,7 @@ static struct i2c_driver w83l785ts_driver = { struct w83l785ts_data { struct device *hwmon_dev; struct mutex update_lock; - char valid; /* zero until following fields are valid */ + bool valid; /* false until following fields are valid */ unsigned long last_updated; /* in jiffies */ /* registers values */ @@ -270,7 +270,7 @@ static struct w83l785ts_data *w83l785ts_update_device(struct device *dev) W83L785TS_REG_TEMP_OVER, data->temp[1]); data->last_updated = jiffies; - data->valid = 1; + data->valid = true; } mutex_unlock(&data->update_lock); diff --git a/drivers/hwmon/w83l786ng.c b/drivers/hwmon/w83l786ng.c index 542afff1423beb..11ba23c1af855c 100644 --- a/drivers/hwmon/w83l786ng.c +++ b/drivers/hwmon/w83l786ng.c @@ -113,7 +113,7 @@ DIV_TO_REG(long val) struct w83l786ng_data { struct i2c_client *client; struct mutex update_lock; - char valid; /* !=0 if following fields are valid */ + bool valid; /* true if following fields are valid */ unsigned long last_updated; /* In jiffies */ unsigned long last_nonvolatile; /* In jiffies, last time we update the * nonvolatile registers */ @@ -209,7 +209,7 @@ static struct w83l786ng_data *w83l786ng_update_device(struct device *dev) data->tolerance[1] = (reg_tmp >> 4) & 0x0f; data->last_updated = jiffies; - data->valid = 1; + data->valid = true; } |