| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt::
"Eventfs fixes:
- With the usage of simple_recursive_remove() recommended by Al Viro,
the code should not be calling "d_invalidate()" itself. Doing so is
causing crashes. The code was calling d_invalidate() on the race of
trying to look up a file while the parent was being deleted. This
was detected, and the added dentry was having d_invalidate() called
on it, but the deletion of the directory was also calling
d_invalidate() on that same dentry.
- A fix to not free the eventfs_inode (ei) until the last dput() was
called on its ei->dentry made the ei->dentry exist even after it
was marked for free by setting the ei->is_freed. But code elsewhere
still was checking if ei->dentry was NULL if ei->is_freed is set
and would trigger WARN_ON if that was the case. That's no longer
true and there should not be any warnings when it is true.
- Use GFP_NOFS for allocations done under eventfs_mutex. The
eventfs_mutex can be taken on file system reclaim, make sure that
allocations done under that mutex do not trigger file system
reclaim.
- Clean up code by moving the taking of inode_lock out of the helper
functions and into where they are needed, and not use the parameter
to know to take it or not. It must always be held but some callers
of the helper function have it taken when they were called.
- Warn if the inode_lock is not held in the helper functions.
- Warn if eventfs_start_creating() is called without a parent. As
eventfs is underneath tracefs, all files created will have a parent
(the top one will have a tracefs parent).
Tracing update:
- Add Mathieu Desnoyers as an official reviewer of the tracing subsystem"
* tag 'trace-v6.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
MAINTAINERS: TRACING: Add Mathieu Desnoyers as Reviewer
eventfs: Make sure that parent->d_inode is locked in creating files/dirs
eventfs: Do not allow NULL parent to eventfs_start_creating()
eventfs: Move taking of inode_lock into dcache_dir_open_wrapper()
eventfs: Use GFP_NOFS for allocation when eventfs_mutex is held
eventfs: Do not invalidate dentry in create_file/dir_dentry()
eventfs: Remove expectation that ei->is_freed means ei->dentry == NULL
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture fixes from Helge Deller:
"This patchset fixes and enforces correct section alignments for the
ex_table, altinstructions, parisc_unwind, jump_table and bug_table
which are created by inline assembly.
Due to not being correctly aligned at link & load time they can
trigger unnecessarily the kernel unaligned exception handler at
runtime. While at it, I switched the bug table to use relative
addresses which reduces the size of the table by half on 64-bit.
We still had the ENOSYM and EREMOTERELEASE errno symbols as left-overs
from HP-UX, which now trigger build-issues with glibc. We can simply
remove them.
Most of the patches are tagged for stable kernel series.
Summary:
- Drop HP-UX ENOSYM and EREMOTERELEASE return codes to avoid glibc
build issues
- Fix section alignments for ex_table, altinstructions, parisc unwind
table, jump_table and bug_table
- Reduce size of bug_table on 64-bit kernel by using relative
pointers"
* tag 'parisc-for-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Reduce size of the bug_table on 64-bit kernel by half
parisc: Drop the HP-UX ENOSYM and EREMOTERELEASE error codes
parisc: Use natural CPU alignment for bug_table
parisc: Ensure 32-bit alignment on parisc unwind section
parisc: Mark lock_aligned variables 16-byte aligned on SMP
parisc: Mark jump_table naturally aligned
parisc: Mark altinstructions read-only and 32-bit aligned
parisc: Mark ex_table entries 32-bit aligned in uaccess.h
parisc: Mark ex_table entries 32-bit aligned in assembly.h
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 microcode fixes from Ingo Molnar:
"Fix/enhance x86 microcode version reporting: fix the bootup log spam,
and remove the driver version announcement to avoid version confusion
when distros backport fixes"
* tag 'x86-urgent-2023-11-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode: Rework early revisions reporting
x86/microcode: Remove the driver announcement and version
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf event fix from Ingo Molnar:
"Fix a bug in the Intel hybrid CPUs hardware-capabilities enumeration
code resulting in non-working events on those platforms"
* tag 'perf-urgent-2023-11-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Correct incorrect 'or' operation for PMU capabilities
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Ingo Molnar:
"Fix lockdep block chain corruption resulting in KASAN warnings"
* tag 'locking-urgent-2023-11-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
lockdep: Fix block chain corruption
|
|
Pull smb client fixes from Steve French:
- use after free fix in releasing multichannel interfaces
- fixes for special file types (report char, block, FIFOs properly when
created e.g. by NFS to Windows)
- fixes for reporting various special file types and symlinks properly
when using SMB1
* tag '6.7-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: introduce cifs_sfu_make_node()
smb: client: set correct file type from NFS reparse points
smb: client: introduce ->parse_reparse_point()
smb: client: implement ->query_reparse_point() for SMB1
cifs: fix use after free for iface while disabling secondary channels
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / PHY / Thunderbolt fixes from Greg KH:
"Here are a number of reverts, fixes, and new device ids for 6.7-rc3
for the USB, PHY, and Thunderbolt driver subsystems. Include in here
are:
- reverts of some PHY drivers that went into 6.7-rc1 that shouldn't
have been merged yet, the author is reworking them based on review
comments as they were using older apis that shouldn't be used
anymore for newer drivers
- small thunderbolt driver fixes for reported issues
- USB driver fixes for a variety of small issues in dwc3, typec,
xhci, and other smaller drivers.
- new device ids for usb-serial and onboard_usb_hub drivers.
All of these have been in linux-next with no reported issues"
* tag 'usb-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (33 commits)
USB: serial: option: add Luat Air72*U series products
USB: dwc3: qcom: fix ACPI platform device leak
USB: dwc3: qcom: fix software node leak on probe errors
USB: dwc3: qcom: fix resource leaks on probe deferral
USB: dwc3: qcom: simplify wakeup interrupt setup
USB: dwc3: qcom: fix wakeup after probe deferral
dt-bindings: usb: qcom,dwc3: fix example wakeup interrupt types
usb: misc: onboard-hub: add support for Microchip USB5744
dt-bindings: usb: microchip,usb5744: Add second supply
usb: misc: ljca: Fix enumeration error on Dell Latitude 9420
USB: serial: option: add Fibocom L7xx modules
USB: xhci-plat: fix legacy PHY double init
usb: typec: tipd: Supply also I2C driver data
usb: xhci-mtk: fix in-ep's start-split check failure
usb: dwc3: set the dma max_seg_size
usb: config: fix iteration issue in 'usb_get_bos_descriptor()'
usb: dwc3: add missing of_node_put and platform_device_put
USB: dwc2: write HCINT with INTMASK applied
usb: misc: ljca: Drop _ADR support to get ljca children devices
usb: cdnsp: Fix deadlock issue during using NCM gadget
...
|
|
Pull xfs fix from Chandan Babu:
- Validate quota records recovered from the log before writing them to
the disk.
* tag 'xfs-6.7-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: dquot recovery does not validate the recovered dquot
xfs: clean up dqblk extraction
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Fix "rodata=on" not disabling "rodata=full" on arm64
- Add arm64 make dependency between vmlinuz.efi and Image, leading to
occasional build failures previously (with parallel building)
- Add newline to the output formatting of the za-fork kselftest
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: add dependency between vmlinuz.efi and Image
kselftest/arm64: Fix output formatting for za-fork
arm64: mm: Fix "rodata=on" when CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- A small cleanup patch for the Xen privcmd driver
- A fix for the swiotlb-xen driver which was missing the advertising of
the maximum mapping length
- A fix for Xen on Arm for a longstanding bug, which happened to occur
only recently: a structure in percpu memory crossed a page boundary,
which was rejected by the hypervisor
* tag 'for-linus-6.7a-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
arm/xen: fix xen_vcpu_info allocation alignment
xen: privcmd: Replace zero-length array with flex-array member and use __counted_by
swiotlb-xen: provide the "max_mapping_size" method
|
|
Enable GENERIC_BUG_RELATIVE_POINTERS which will store 32-bit relative
offsets to the bug address and the source file name instead of 64-bit
absolute addresses. This effectively reduces the size of the
bug_table[] array by half on 64-bit kernels.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Those return codes are only defined for the parisc architecture and
are leftovers from when we wanted to be HP-UX compatible.
They are not returned by any Linux kernel syscall but do trigger
problems with the glibc strerrorname_np() and strerror() functions as
reported in glibc issue #31080.
There is no need to keep them, so simply remove them.
Signed-off-by: Helge Deller <deller@gmx.de>
Reported-by: Bruno Haible <bruno@clisp.org>
Closes: https://sourceware.org/bugzilla/show_bug.cgi?id=31080
Cc: stable@vger.kernel.org
|
|
Make sure that the __bug_table section gets 32- or 64-bit aligned,
depending if a 32- or 64-bit kernel is being built.
Mark it non-writeable and use .blockz instead of the .org assembler
directive to pad the struct.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v6.0+
|
|
Make sure the .PARISC.unwind section will be 32-bit aligned.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v6.0+
|
|
On parisc we need 16-byte alignment for variables which are used for
locking. Mark the __lock_aligned attribute acordingly so that the
.data..lock_aligned section will get that alignment in the generated
object files.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v6.0+
|
|
The jump_table stores two 32-bit words and one 32- (on 32-bit kernel)
or one 64-bit word (on 64-bit kernel).
Ensure that the last word is always 64-bit aligned on a 64-bit kernel
by aligning the whole structure on sizeof(long).
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v6.0+
|
|
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v6.0+
|
|
Add an align statement to tell the linker that all ex_table entries and as
such the whole ex_table section should be 32-bit aligned in vmlinux and modules.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v6.0+
|
|
Add an align statement to tell the linker that all ex_table entries and as
such the whole ex_table section should be 32-bit aligned in vmlinux and modules.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v6.0+
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Alexander Gordeev:
- Remove unnecessary assignment of the performance event last_tag.
- Create missing /sys/firmware/ipl/* attributes when kernel is booted
in dump mode using List-directed ECKD IPL.
- Remove odd comment.
- Fix s390-specific part of scripts/checkstack.pl script that only
matches three-digit numbers starting with 3 or any higher number and
skips any stack sizes smaller than 304 bytes.
* tag 's390-6.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
scripts/checkstack.pl: match all stack sizes for s390
s390: remove odd comment
s390/ipl: add missing IPL_TYPE_ECKD_DUMP case to ipl_init()
s390/pai: cleanup event initialization
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These add an ACPI IRQ override quirk for ASUS ExpertBook B1402CVA and
fix an ACPI processor idle issue leading to triple-faults in Xen HVM
guests and an ACPI backlight driver issue that causes GPUs to
misbehave while their children power is being fixed up.
Specifics:
- Avoid powering up GPUs while attempting to fix up power for their
children (Hans de Goede)
- Use raw_safe_halt() instead of safe_halt() in acpi_idle_play_dead()
so as to avoid triple-falts during CPU online in Xen HVM guests due
to the setting of the hardirqs_enabled flag in safe_halt() (David
Woodhouse)
- Add an ACPI IRQ override quirk for ASUS ExpertBook B1402CVA (Hans
de Goede)"
* tag 'acpi-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: resource: Skip IRQ override on ASUS ExpertBook B1402CVA
ACPI: video: Use acpi_device_fix_up_power_children()
ACPI: PM: Add acpi_device_fix_up_power_children() function
ACPI: processor_idle: use raw_safe_halt() in acpi_idle_play_dead()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Fix a syntax error in the sleepgraph utility which causes it to exit
early on every invocation (David Woodhouse)"
* tag 'pm-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: tools: Fix sleepgraph syntax error
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull AFS fixes from David Howells:
- Fix the afs_server_list struct to be cleaned up with RCU
- Fix afs to translate a no-data result from a DNS lookup into ENOENT,
not EDESTADDRREQ for consistency with OpenAFS
- Fix afs to translate a negative DNS lookup result into ENOENT rather
than EDESTADDRREQ
- Fix file locking on R/O volumes to operate in local mode as the
server doesn't handle exclusive locks on such files
- Set SB_RDONLY on superblocks for RO and Backup volumes so that the
VFS can see that they're read only
* tag 'afs-fixes-20231124' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
afs: Mark a superblock for an R/O or Backup volume as SB_RDONLY
afs: Fix file locking on R/O volumes to operate in local mode
afs: Return ENOENT if no cell DNS record can be found
afs: Make error on cell lookup failure consistent with OpenAFS
afs: Fix afs_server_list to be cleaned up with RCU
|
|
Merge ACPI backlight driver fixes and an ACPI processor driver fix for
6.7-rc3:
- Avoid powering up GPUs while attempting to fix up power for their
children (Hans de Goede).
- Use raw_safe_halt() instead of safe_halt() in acpi_idle_play_dead()
so as to avoid triple-falts during CPU online in Xen HVM guests due
to the setting of the hardirqs_enabled flag in safe_halt() (David
Woodhouse).
* acpi-video:
ACPI: video: Use acpi_device_fix_up_power_children()
ACPI: PM: Add acpi_device_fix_up_power_children() function
* acpi-processor:
ACPI: processor_idle: use raw_safe_halt() in acpi_idle_play_dead()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Avoid calling back into LSMs from vfs_getattr_nosec() calls.
IMA used to query inode properties accessing raw inode fields without
dedicated helpers. That was finally fixed a few releases ago by
forcing IMA to use vfs_getattr_nosec() helpers.
The goal of the vfs_getattr_nosec() helper is to query for attributes
without calling into the LSM layer which would be quite problematic
because incredibly IMA is called from __fput()...
__fput()
-> ima_file_free()
What it does is to call back into the filesystem to update the file's
IMA xattr. Querying the inode without using vfs_getattr_nosec() meant
that IMA didn't handle stacking filesystems such as overlayfs
correctly. So the switch to vfs_getattr_nosec() is quite correct. But
the switch to vfs_getattr_nosec() revealed another bug when used on
stacking filesystems:
__fput()
-> ima_file_free()
-> vfs_getattr_nosec()
-> i_op->getattr::ovl_getattr()
-> vfs_getattr()
-> i_op->getattr::$WHATEVER_UNDERLYING_FS_getattr()
-> security_inode_getattr() # calls back into LSMs
Now, if that __fput() happens from task_work_run() of an exiting task
current->fs and various other pointer could already be NULL. So
anything in the LSM layer relying on that not being NULL would be
quite surprised.
Fix that by passing the information that this is a security request
through to the stacking filesystem by adding a new internal
ATT_GETATTR_NOSEC flag. Now the callchain becomes:
__fput()
-> ima_file_free()
-> vfs_getattr_nosec()
-> i_op->getattr::ovl_getattr()
-> if (AT_GETATTR_NOSEC)
vfs_getattr_nosec()
else
vfs_getattr()
-> i_op->getattr::$WHATEVER_UNDERLYING_FS_getattr()
- Fix a bug introduced with the iov_iter rework from last cycle.
This broke /proc/kcore by copying too much and without the correct
offset.
- Add a missing NULL check when allocating the root inode in
autofs_fill_super().
- Fix stable writes for multi-device filesystems (xfs, btrfs etc) and
the block device pseudo filesystem.
Stable writes used to be a superblock flag only, making it a per
filesystem property. Add an additional AS_STABLE_WRITES mapping flag
to allow for fine-grained control.
- Ensure that offset_iterate_dir() returns 0 after reaching the end of
a directory so it adheres to getdents() convention.
* tag 'vfs-6.7-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
libfs: getdents() should return 0 after reaching EOD
xfs: respect the stable writes flag on the RT device
xfs: clean up FS_XFLAG_REALTIME handling in xfs_ioctl_setattr_xflags
block: update the stable_writes flag in bdev_add
filemap: add a per-mapping stable writes flag
autofs: add: new_inode check in autofs_fill_super()
iov_iter: fix copy_page_to_iter_nofault()
fs: Pass AT_GETATTR_NOSEC flag to getattr interface function
|
|
Pull drm fixes from Dave Airlie:
"Back to regular scheduled fixes pull request, mainly a bunch of msm,
some i915 and otherwise a few scattered, one memory crasher in the
nouveau GSP paths is helping stabilise that work.
msm:
- Fix the VREG_CTRL_1 for 4nm CPHY to match downstream
- Remove duplicate call to drm_kms_helper_poll_init() in
msm_drm_init()
- Fix the safe_lut_tbl[] for sc8280xp to match downstream
- Don't attach the drm_dp_set_subconnector_property() for eDP
- Fix to attach drm_dp_set_subconnector_property() for DP. Otherwise
there is a bootup crash on multiple targets
- Remove unnecessary NULL check left behind during cleanup
i915:
- Fix race between DP MST connectore registration and setup
- Fix GT memory leak on probe error path
panel:
- Fixes for innolux and auo,b101uan08.3 panel.
- Fix Himax83102-j02 timings.
ivpu:
- Fix ivpu MMIO reset.
ast:
- AST fix on connetor disconnection.
nouveau:
- gsp memory corruption fix
rockchip:
- color fix"
* tag 'drm-fixes-2023-11-24' of git://anongit.freedesktop.org/drm/drm:
nouveau/gsp: allocate enough space for all channel ids.
drm/panel: boe-tv101wum-nl6: Fine tune Himax83102-j02 panel HFP and HBP
drm/ast: Disconnect BMC if physical connector is connected
accel/ivpu/37xx: Fix hangs related to MMIO reset
drm/rockchip: vop: Fix color for RGB888/BGR888 format on VOP full
drm/i915: do not clean GT table on error path
drm/i915/dp_mst: Fix race between connector registration and setup
drm/panel: simple: Fix Innolux G101ICE-L01 timings
drm/panel: simple: Fix Innolux G101ICE-L01 bus flags
drm/msm: remove unnecessary NULL check
drm/panel: auo,b101uan08.3: Fine tune the panel power sequence
drm/msm/dp: attach the DP subconnector property
drm/msm/dp: don't touch DP subconnector property in eDP case
drm/msm/dpu: Add missing safe_lut_tbl in sc8280xp catalog
drm/msm: remove exra drm_kms_helper_poll_init() call
drm/msm/dsi: use the correct VREG_CTRL_1 value for 4nm cphy
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial fixes for 6.7-rc3
Here are a couple of modem device entry fixes and some new modem device
ids.
All have been in linux-next with no reported issues.
* tag 'usb-serial-6.7-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: (329 commits)
USB: serial: option: add Luat Air72*U series products
USB: serial: option: add Fibocom L7xx modules
USB: serial: option: fix FM101R-GL defines
USB: serial: option: don't claim interface 4 for ZTE MF290
Linux 6.7-rc2
prctl: Disable prctl(PR_SET_MDWE) on parisc
parisc/power: Fix power soft-off when running on qemu
parisc: Replace strlcpy() with strscpy()
NFSD: Fix checksum mismatches in the duplicate reply cache
NFSD: Fix "start of NFS reply" pointer passed to nfsd_cache_update()
NFSD: Update nfsd_cache_append() to use xdr_stream
nfsd: fix file memleak on client_opens_release
dm-crypt: start allocating with MAX_ORDER
dm-verity: don't use blocking calls from tasklets
dm-bufio: fix no-sleep mode
dm-delay: avoid duplicate logic
dm-delay: fix bugs introduced by kthread mode
dm-delay: fix a race between delay_presuspend and delay_bio
drm/amdgpu/gmc9: disable AGP aperture
drm/amdgpu/gmc10: disable AGP aperture
...
|
|
Mark a superblock that is for for an R/O or Backup volume as SB_RDONLY when
mounting it.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
AFS doesn't really do locking on R/O volumes as fileservers don't maintain
state with each other and thus a lock on a R/O volume file on one
fileserver will not be be visible to someone looking at the same file on
another fileserver.
Further, the server may return an error if you try it.
Fix this by doing what other AFS clients do and handle filelocking on R/O
volume files entirely within the client and don't touch the server.
Fixes: 6c6c1d63c243 ("afs: Provide mount-time configurable byte-range file locking emulation")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
Make AFS return error ENOENT if no cell SRV or AFSDB DNS record (or
cellservdb config file record) can be found rather than returning
EDESTADDRREQ.
Also add cell name lookup info to the cursor dump.
Fixes: d5c32c89b208 ("afs: Fix cell DNS lookup")
Reported-by: Markus Suvanto <markus.suvanto@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216637
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
Kent reported an occasional KASAN splat in lockdep. Mark then noted:
> I suspect the dodgy access is to chain_block_buckets[-1], which hits the last 4
> bytes of the redzone and gets (incorrectly/misleadingly) attributed to
> nr_large_chain_blocks.
That would mean @size == 0, at which point size_to_bucket() returns -1
and the above happens.
alloc_chain_hlocks() has 'size - req', for the first with the
precondition 'size >= rq', which allows the 0.
This code is trying to split a block, del_chain_block() takes what we
need, and add_chain_block() puts back the remainder, except in the
above case the remainder is 0 sized and things go sideways.
Fixes: 810507fe6fd5 ("locking/lockdep: Reuse freed chain_hlocks entries")
Reported-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Kent Overstreet <kent.overstreet@linux.dev>
Link: https://lkml.kernel.org/r/20231121114126.GH8262@noisy.programming.kicks-ass.net
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ata fix from Damien Le Moal:
- Add a missing error check in the adapter initialization of the
pata_isapnp driver (Chen)
* tag 'ata-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: pata_isapnp: Add missing error check for devm_ioport_map()
|
|
Pull block fixes from Jens Axboe:
"A bit bigger than usual at this time, but nothing really earth
shattering:
- NVMe pull request via Keith:
- TCP TLS fixes (Hannes)
- Authentifaction fixes (Mark, Hannes)
- Properly terminate target names (Christoph)
- MD pull request via Song, fixing a raid5 corruption issue
- Disentanglement of the dependency mess in nvme introduced with the
tls additions. Now it should actually build on all configs (Arnd)
- Series of bcache fixes (Coly)
- Removal of a dead helper (Damien)
- s390 dasd fix (Muhammad, Jan)
- lockdep blk-cgroup fixes (Ming)"
* tag 'block-6.7-2023-11-23' of git://git.kernel.dk/linux: (33 commits)
nvme: tcp: fix compile-time checks for TLS mode
nvme: target: fix Kconfig select statements
nvme: target: fix nvme_keyring_id() references
nvme: move nvme_stop_keep_alive() back to original position
nbd: pass nbd_sock to nbd_read_reply() instead of index
s390/dasd: protect device queue against concurrent access
s390/dasd: resolve spelling mistake
block/null_blk: Fix double blk_mq_start_request() warning
nvmet-tcp: always initialize tls_handshake_tmo_work
nvmet: nul-terminate the NQNs passed in the connect command
nvme: blank out authentication fabrics options if not configured
nvme: catch errors from nvme_configure_metadata()
nvme-tcp: only evaluate 'tls' option if TLS is selected
nvme-auth: set explanation code for failure2 msgs
nvme-auth: unlock mutex in one place only
block: Remove blk_set_runtime_active()
nbd: fix null-ptr-dereference while accessing 'nbd->config'
nbd: factor out a helper to get nbd_config without holding 'config_lock'
nbd: fold nbd config initialization into nbd_alloc_config()
bcache: avoid NULL checking to c->root in run_cache_set()
...
|
|
Pull io_uring fixes from Jens Axboe:
"A fix for ensuring that LINKAT always propagates flags correctly, and
a fix for an off-by-one in segment skipping for registered buffers.
Both heading to stable as well"
* tag 'io_uring-6.7-2023-11-23' of git://git.kernel.dk/linux:
io_uring: fix off-by one bvec index
io_uring/fs: consider link->flags when getting path for LINKAT
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- revert of commit that caused regression to many Logitech unifying
receiver users (Jiri Kosina)
- power management fix for hid-mcp2221 (Hamish Martin)
- fix for race condition between HID core and HID debug (Charles Yi)
- a couple of assorted device-ID-specific quirks
* tag 'for-linus-2023112301' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: multitouch: Add quirk for HONOR GLO-GXXX touchpad
HID: hid-asus: reset the backlight brightness level on resume
HID: hid-asus: add const to read-only outgoing usb buffer
Revert "HID: logitech-dj: Add support for a new lightspeed receiver iteration"
HID: add ALWAYS_POLL quirk for Apple kb
HID: glorious: fix Glorious Model I HID report
HID: fix HID device resource race between HID core and debugging support
HID: apple: add Jamesdonkey and A3R to non-apple keyboards list
HID: mcp2221: Allow IO to start during probe
HID: mcp2221: Set driver data before I2C adapter add
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
drm/i915 fixes for v6.7-rc3:
- Fix race between DP MST connectore registration and setup
- Fix GT memory leak on probe error path
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87y1eol98h.fsf@intel.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Fixes for v6.7-rc3:
- Panel fixes for innolux and auo,b101uan08.3 panel.
- Fix ivpu MMIO reset.
- AST fix on connetor disconnection.
- nouveau gsp fix.
- rockchip color fix.
- Fix Himax83102-j02 timings.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/12322257-2e0c-43d3-8241-876aafc10e4a@linux.intel.com
|
|
https://gitlab.freedesktop.org/drm/msm into drm-fixes
Fixes for v6.7-rc3:
- Fix the VREG_CTRL_1 for 4nm CPHY to match downstream
- Remove duplicate call to drm_kms_helper_poll_init() in msm_drm_init()
- Fix the safe_lut_tbl[] for sc8280xp to match downstream
- Don't attach the drm_dp_set_subconnector_property() for eDP
- Fix to attach drm_dp_set_subconnector_property() for DP. Otherwise
there is a bootup crash on multiple targets
- Remove unnecessary NULL check left behind during cleanup
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGtkna3P3mvaF53n2ARJACaXQU+OFfShayTrsUVmqCOmNQ@mail.gmail.com
|
|
A common issue in Makefile is a race in parallel building.
You need to be careful to prevent multiple threads from writing to the
same file simultaneously.
Commit 3939f3345050 ("ARM: 8418/1: add boot image dependencies to not
generate invalid images") addressed such a bad scenario.
A similar symptom occurs with the following command:
$ make -j$(nproc) ARCH=arm64 Image vmlinuz.efi
[ snip ]
SORTTAB vmlinux
OBJCOPY arch/arm64/boot/Image
OBJCOPY arch/arm64/boot/Image
AS arch/arm64/boot/zboot-header.o
PAD arch/arm64/boot/vmlinux.bin
GZIP arch/arm64/boot/vmlinuz
OBJCOPY arch/arm64/boot/vmlinuz.o
LD arch/arm64/boot/vmlinuz.efi.elf
OBJCOPY arch/arm64/boot/vmlinuz.efi
The log "OBJCOPY arch/arm64/boot/Image" is displayed twice.
It indicates that two threads simultaneously enter arch/arm64/boot/
and write to arch/arm64/boot/Image.
It occasionally leads to a build failure:
$ make -j$(nproc) ARCH=arm64 Image vmlinuz.efi
[ snip ]
SORTTAB vmlinux
OBJCOPY arch/arm64/boot/Image
PAD arch/arm64/boot/vmlinux.bin
truncate: Invalid number: 'arch/arm64/boot/vmlinux.bin'
make[2]: *** [drivers/firmware/efi/libstub/Makefile.zboot:13:
arch/arm64/boot/vmlinux.bin] Error 1
make[2]: *** Deleting file 'arch/arm64/boot/vmlinux.bin'
make[1]: *** [arch/arm64/Makefile:163: vmlinuz.efi] Error 2
make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile:234: __sub-make] Error 2
vmlinuz.efi depends on Image, but such a dependency is not specified
in arch/arm64/Makefile.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: SImon Glass <sjg@chromium.org>
Link: https://lore.kernel.org/r/20231119053234.2367621-1-masahiroy@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf.
Current release - regressions:
- Revert "net: r8169: Disable multicast filter for RTL8168H and
RTL8107E"
- kselftest: rtnetlink: fix ip route command typo
Current release - new code bugs:
- s390/ism: make sure ism driver implies smc protocol in kconfig
- two build fixes for tools/net
Previous releases - regressions:
- rxrpc: couple of ACK/PING/RTT handling fixes
Previous releases - always broken:
- bpf: verify bpf_loop() callbacks as if they are called unknown
number of times
- improve stability of auto-bonding with Hyper-V
- account BPF-neigh-redirected traffic in interface statistics
Misc:
- net: fill in some more MODULE_DESCRIPTION()s"
* tag 'net-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (58 commits)
tools: ynl: fix duplicate op name in devlink
tools: ynl: fix header path for nfsd
net: ipa: fix one GSI register field width
tls: fix NULL deref on tls_sw_splice_eof() with empty record
net: axienet: Fix check for partial TX checksum
vsock/test: fix SEQPACKET message bounds test
i40e: Fix adding unsupported cloud filters
ice: restore timestamp configuration after device reset
ice: unify logic for programming PFINT_TSYN_MSK
ice: remove ptp_tx ring parameter flag
amd-xgbe: propagate the correct speed and duplex status
amd-xgbe: handle the corner-case during tx completion
amd-xgbe: handle corner-case during sfp hotplug
net: veth: fix ethtool stats reporting
octeontx2-pf: Fix ntuple rule creation to direct packet to VF with higher Rx queue than its PF
net: usb: qmi_wwan: claim interface 4 for ZTE MF290
Revert "net: r8169: Disable multicast filter for RTL8168H and RTL8107E"
net/smc: avoid data corruption caused by decline
nfc: virtual_ncidev: Add variable to check if ndev is running
dpll: Fix potential msg memleak when genlmsg_put_reply failed
...
|
|
Remove duplicate code and add new helper for creating special files in
SFU (Services for UNIX) format that can be shared by SMB1+ code.
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Handle all file types in NFS reparse points as specified in MS-FSCC
2.1.2.6 Network File System (NFS) Reparse Data Buffer.
The client is now able to set all file types based on the parsed NFS
reparse point, which used to support only symlinks. This works for
SMB1+.
Before patch:
$ mount.cifs //srv/share /mnt -o ...
$ ls -l /mnt
ls: cannot access 'block': Operation not supported
ls: cannot access 'char': Operation not supported
ls: cannot access 'fifo': Operation not supported
ls: cannot access 'sock': Operation not supported
total 1
l????????? ? ? ? ? ? block
l????????? ? ? ? ? ? char
-rwxr-xr-x 1 root root 5 Nov 18 23:22 f0
l????????? ? ? ? ? ? fifo
l--------- 1 root root 0 Nov 18 23:23 link -> f0
l????????? ? ? ? ? ? sock
After patch:
$ mount.cifs //srv/share /mnt -o ...
$ ls -l /mnt
total 1
brwxr-xr-x 1 root root 123, 123 Nov 18 00:34 block
crwxr-xr-x 1 root root 1234, 1234 Nov 18 00:33 char
-rwxr-xr-x 1 root root 5 Nov 18 23:22 f0
prwxr-xr-x 1 root root 0 Nov 18 23:23 fifo
lrwxr-xr-x 1 root root 0 Nov 18 23:23 link -> f0
srwxr-xr-x 1 root root 0 Nov 19 2023 sock
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Parse reparse point into cifs_open_info_data structure and feed it
through cifs_open_info_to_fattr().
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Reparse points are not limited to symlinks, so implement
->query_reparse_point() in order to handle different file types.
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
We were deferencing iface after it has been released. Fix is to
release after all dereference instances have been encountered.
Signed-off-by: Ritvik Budhiraja <rbudhiraja@microsoft.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202311110815.UJaeU3Tt-lkp@intel.com/
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Update the USB serial option driver support for Luat Air72*U series
products.
ID 1782:4e00 Spreadtrum Communications Inc. UNISOC-8910
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 13 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1782 ProdID=4e00 Rev=00.00
S: Manufacturer=UNISOC
S: Product=UNISOC-8910
C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=400mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=4096ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
If#= 2: AT
If#= 3: PPP + AT
If#= 4: Debug
Co-developed-by: Yangyu Chen <cyy@cyyself.name>
Signed-off-by: Yangyu Chen <cyy@cyyself.name>
Signed-off-by: Asuna Yang <SpriteOvO@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
We don't support CRUD-inspired message types in YNL too well.
One aspect that currently trips us up is the fact that single
message ID can be used in multiple commands (as the response).
This leads to duplicate entries in the id-to-string tables:
devlink-user.c:19:34: warning: initialized field overwritten [-Woverride-init]
19 | [DEVLINK_CMD_PORT_NEW] = "port-new",
| ^~~~~~~~~~
devlink-user.c:19:34: note: (near initialization for ‘devlink_op_strmap[7]’)
Fixes tag points at where the code was generated, the "real" problem
is that the code generator does not support CRUD.
Fixes: f2f9dd164db0 ("netlink: specs: devlink: add the remaining command to generate complete split_ops")
Link: https://lore.kernel.org/r/20231123030558.1611831-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The makefile dependency is trying to include the wrong header:
<command-line>: fatal error: ../../../../include/uapi//linux/nfsd.h: No such file or directory
The guard also looks wrong.
Fixes: f14122b2c2ac ("tools: ynl: Add source files for nfsd netlink protocol")
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/20231123030624.1611925-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The width of the R_LENGTH field of the EV_CH_E_CNTXT_1 GSI register
is 24 bits (not 20 bits) starting with IPA v5.0. Fix this.
Fixes: faf0678ec8a0 ("net: ipa: add IPA v5.0 GSI register definitions")
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20231122231708.896632-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzkaller discovered that if tls_sw_splice_eof() is executed as part of
sendfile() when the plaintext/ciphertext sk_msg are empty, the send path
gets confused because the empty ciphertext buffer does not have enough
space for the encryption overhead. This causes tls_push_record() to go on
the `split = true` path (which is only supposed to be used when interacting
with an attached BPF program), and then get further confused and hit the
tls_merge_open_record() path, which then assumes that there must be at
least one populated buffer element, leading to a NULL deref.
It is possible to have empty plaintext/ciphertext buffers if we previously
bailed from tls_sw_sendmsg_locked() via the tls_trim_both_msgs() path.
tls_sw_push_pending_record() already handles this case correctly; let's do
the same check in tls_sw_splice_eof().
Fixes: df720d288dbb ("tls/sw: Use splice_eof() to flush")
Cc: stable@vger.kernel.org
Reported-by: syzbot+40d43509a099ea756317@syzkaller.appspotmail.com
Signed-off-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/r/20231122214447.675768-1-jannh@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Due to a typo, the code checked the RX checksum feature in the TX path.
Fixes: 8a3b7a252dca ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://lore.kernel.org/r/20231122004219.3504219-1-samuel.holland@sifive.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Tune message length calculation to make this test work on machines
where 'getpagesize()' returns >32KB. Now maximum message length is not
hardcoded (on machines above it was smaller than 'getpagesize()' return
value, thus we get negative value and test fails), but calculated at
runtime and always bigger than 'getpagesize()' result. Reproduced on
aarch64 with 64KB page size.
Fixes: 5c338112e48a ("test/vsock: rework message bounds test")
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reported-by: Bogdan Marcynkov <bmarcynk@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20231121211642.163474-1-avkrasnov@salutedevices.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If a VF tries to add unsupported cloud filter through virtchnl
then i40e_add_del_cloud_filter(_big_buf) returns -ENOTSUPP but
this error code is stored in 'ret' instead of 'aq_ret' that
is used as error code sent back to VF. In this scenario where
one of the mentioned functions fails the value of 'aq_ret'
is zero so the VF will incorrectly receive a 'success'.
Use 'aq_ret' to store return value and remove 'ret' local
variable. Additionally fix the issue when filter allocation
fails, in this case no notification is sent back to the VF.
Fixes: e284fc280473 ("i40e: Add and delete cloud filter")
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20231121211338.3348677-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Tony Nguyen says:
====================
ice: restore timestamp config after reset
Jake Keller says:
We recently discovered during internal validation that the ice driver has
not been properly restoring Tx timestamp configuration after a device reset,
which resulted in application failures after a device reset.
After some digging, it turned out this problem is two-fold. Since the
introduction of the PTP support the driver has been clobbering the storage
of the current timestamp configuration during reset. Thus after a reset, the
driver will no longer perform Tx or Rx timestamps, and will report
timestamp configuration as disabled if SIOCGHWTSTAMP ioctl is issued.
In addition, the recently merged auxiliary bus support code missed that
PFINT_TSYN_MSK must be reprogrammed on the clock owner for E822 devices.
Failure to restore this register configuration results in the driver no
longer responding to interrupts from other ports. Depending on the traffic
pattern, this can either result in increased latency responding to
timestamps on the non-owner ports, or it can result in the driver never
reporting any timestamps. The configuration of PFINT_TSYN_MSK was only done
during initialization. Due to this, the Tx timestamp issue persists even if
userspace reconfigures timestamping.
This series fixes both issues, as well as removes a redundant Tx ring field
since we can rely on the skb flag as the primary detector for a Tx timestamp
request.
Note that I don't think this series will directly apply to older stable
releases (even v6.6) as we recently refactored a lot of the PTP code to
support auxiliary bus. Patch 2/3 only matters for the post-auxiliary bus
implementation. The principle of patch 1/3 and 3/3 could apply as far back
as the initial PTP support, but I don't think it will apply cleanly as-is.
====================
Link: https://lore.kernel.org/r/20231121211259.3348630-1-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The driver calls ice_ptp_cfg_timestamp() during ice_ptp_prepare_for_reset()
to disable timestamping while the device is resetting. This operation
destroys the user requested configuration. While the driver does call
ice_ptp_cfg_timestamp in ice_rebuild() to restore some hardware settings
after a reset, it unconditionally passes true or false, resulting in
failure to restore previous user space configuration.
This results in a device reset forcibly disabling timestamp configuration
regardless of current user settings.
This was not detected previously due to a quirk of the LinuxPTP ptp4l
application. If ptp4l detects a missing timestamp, it enters a fault state
and performs recovery logic which includes executing SIOCSHWTSTAMP again,
restoring the now accidentally cleared configuration.
Not every application does this, and for these applications, timestamps
will mysteriously stop after a PF reset, without being restored until an
application restart.
Fix this by replacing ice_ptp_cfg_timestamp() with two new functions:
1) ice_ptp_disable_timestamp_mode() which unconditionally disables the
timestamping logic in ice_ptp_prepare_for_reset() and ice_ptp_release()
2) ice_ptp_restore_timestamp_mode() which calls
ice_ptp_restore_tx_interrupt() to restore Tx timestamping configuration,
calls ice_set_rx_tstamp() to restore Rx timestamping configuration, and
issues an immediate TSYN_TX interrupt to ensure that timestamps which
may have occurred during the device reset get processed.
Modify the ice_ptp_set_timestamp_mode to directly save the user
configuration and then call ice_ptp_restore_timestamp_mode. This way, reset
no longer destroys the saved user configuration.
This obsoletes the ice_set_tx_tstamp() function which can now be safely
removed.
With this change, all devices should now restore Tx and Rx timestamping
functionality correctly after a PF reset without application intervention.
Fixes: 77a781155a65 ("ice: enable receive hardware timestamping")
Fixes: ea9b847cda64 ("ice: enable transmit timestamps for E810 devices")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Commit d938a8cca88a ("ice: Auxbus devices & driver for E822 TS") modified
how Tx timestamps are handled for E822 devices. On these devices, only the
clock owner handles reading the Tx timestamp data from firmware. To do
this, the PFINT_TSYN_MSK register is modified from the default value to one
which enables reacting to a Tx timestamp on all PHY ports.
The driver currently programs PFINT_TSYN_MSK in different places depending
on whether the port is the clock owner or not. For the clock owner, the
PFINT_TSYN_MSK value is programmed during ice_ptp_init_owner just before
calling ice_ptp_tx_ena_intr to program the PHY ports.
For the non-clock owner ports, the PFINT_TSYN_MSK is programmed during
ice_ptp_init_port.
If a large enough device reset occurs, the PFINT_TSYN_MSK register will be
reset to the default value in which only the PHY associated directly with
the PF will cause the Tx timestamp interrupt to trigger.
The driver lacks logic to reprogram the PFINT_TSYN_MSK register after a
device reset. For the E822 device, this results in the PF no longer
responding to interrupts for other ports. This results in failure to
deliver Tx timestamps to user space applications.
Rename ice_ptp_configure_tx_tstamp to ice_ptp_cfg_tx_interrupt, and unify
the logic for programming PFINT_TSYN_MSK and PFINT_OICR_ENA into one place.
This function will program both registers according to the combination of
user configuration and device requirements.
This ensures that PFINT_TSYN_MSK is always restored when we configure the
Tx timestamp interrupt.
Fixes: d938a8cca88a ("ice: Auxbus devices & driver for E822 TS")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Before performing a Tx timestamp in ice_stamp(), the driver checks a ptp_tx
ring variable to see if timestamping is enabled on that ring. This value is
set for all rings whenever userspace configures Tx timestamping.
Ostensibly this was done to avoid wasting cycles checking other fields when
timestamping has not been enabled. However, for Tx timestamps we already
get an individual per-SKB flag indicating whether userspace wants to
request a timestamp on that packet. We do not gain much by also having
a separate flag to check for whether timestamping was enabled.
In fact, the driver currently fails to restore the field after a PF reset.
Because of this, if a PF reset occurs, timestamps will be disabled.
Since this flag doesn't add value in the hotpath, remove it and always
provide a timestamp if the SKB flag has been set.
A following change will fix the reset path to properly restore user
timestamping configuration completely.
This went unnoticed for some time because one of the most common
applications using Tx timestamps, ptp4l, will reconfigure the socket as
part of its fault recovery logic.
Fixes: ea9b847cda64 ("ice: enable transmit timestamps for E810 devices")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The za-fork test does not output a newline when reporting the result of
the one test it runs, causing the counts printed by kselftest to be
included in the test name. Add the newline.
Fixes: 266679ffd867 ("kselftest/arm64: Convert za-fork to use kselftest.h")
Cc: <stable@vger.kernel.org> # 6.4.x
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20231116-arm64-fix-za-fork-output-v1-1-42c03d4f5759@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Raju Rangoju says:
====================
amd-xgbe: fixes to handle corner-cases
This series include bug fixes to amd-xgbe driver.
====================
Link: https://lore.kernel.org/r/20231121191435.4049995-1-Raju.Rangoju@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
xgbe_get_link_ksettings() does not propagate correct speed and duplex
information to ethtool during cable unplug. Due to which ethtool reports
incorrect values for speed and duplex.
Address this by propagating correct information.
Fixes: 7c12aa08779c ("amd-xgbe: Move the PHY support into amd-xgbe")
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The existing implementation uses software logic to accumulate tx
completions until the specified time (1ms) is met and then poll them.
However, there exists a tiny gap which leads to a race between
resetting and checking the tx_activate flag. Due to this the tx
completions are not reported to upper layer and tx queue timeout
kicks-in restarting the device.
To address this, introduce a tx cleanup mechanism as part of the
periodic maintenance process.
Fixes: c5aa9e3b8156 ("amd-xgbe: Initial AMD 10GbE platform driver")
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Force the mode change for SFI in Fixed PHY configurations. Fixed PHY
configurations needs PLL to be enabled while doing mode set. When the
SFP module isn't connected during boot, driver assumes AN is ON and
attempts auto-negotiation. However, if the connected SFP comes up in
Fixed PHY configuration the link will not come up as PLL isn't enabled
while the initial mode set command is issued. So, force the mode change
for SFI in Fixed PHY configuration to fix link issues.
Fixes: e57f7a3feaef ("amd-xgbe: Prepare for working with more than one type of phy")
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Fix a possible misalignment between page_pool stats and tx xdp_stats
reported in veth_get_ethtool_stats routine.
The issue can be reproduced configuring the veth pair with the
following tx/rx queues:
$ip link add v0 numtxqueues 2 numrxqueues 4 type veth peer name v1 \
numtxqueues 1 numrxqueues 1
and loading a simple XDP program on v0 that just returns XDP_PASS.
In this case on v0 the page_pool stats overwrites tx xdp_stats for queue 1.
Fix the issue incrementing pp_idx of dev->real_num_tx_queues * VETH_TQ_STATS_LEN
since we always report xdp_stats for all tx queues in ethtool.
Fixes: 4fc418053ec7 ("net: veth: add page_pool stats")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/c5b5d0485016836448453f12846c7c4ab75b094a.1700593593.git.lorenzo@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
queue than its PF
It is possible to add a ntuple rule which would like to direct packet to
a VF whose number of queues are greater/less than its PF's queue numbers.
For example a PF can have 2 Rx queues but a VF created on that PF can have
8 Rx queues. As of today, ntuple rule will reject rule because it is
checking the requested queue number against PF's number of Rx queues.
As a part of this fix if the action of a ntuple rule is to move a packet
to a VF's queue then the check is removed. Also, a debug information is
printed to aware user that it is user's responsibility to cross check if
the requested queue number on that VF is a valid one.
Fixes: f0a1913f8a6f ("octeontx2-pf: Add support for ethtool ntuple filters")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231121165624.3664182-1-sumang@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
xen_vcpu_info is a percpu area than needs to be mapped by Xen.
Currently, it could cross a page boundary resulting in Xen being unable
to map it:
[ 0.567318] kernel BUG at arch/arm64/xen/../../arm/xen/enlighten.c:164!
[ 0.574002] Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP
Fix the issue by using __alloc_percpu and requesting alignment for the
memory allocation.
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2311221501340.2053963@ubuntu-linux-20-04-desktop
Fixes: 24d5373dda7c ("arm/xen: Use alloc_percpu rather than __alloc_percpu")
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Interface 4 is used by for QMI interface in stock firmware of MF28D, the
router which uses MF290 modem. Rebind it to qmi_wwan after freeing it up
from option driver.
The proper configuration is:
Interface mapping is:
0: QCDM, 1: (unknown), 2: AT (PCUI), 2: AT (Modem), 4: QMI
T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 4 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=19d2 ProdID=0189 Rev= 0.00
S: Manufacturer=ZTE, Incorporated
S: Product=ZTE LTE Technologies MSM
C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
Cc: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
Link: https://lore.kernel.org/r/20231117231918.100278-3-lech.perczak@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When CONFIG_NVME_KEYRING is enabled as a loadable module, but the TCP
host code is built-in, it fails to link:
arm-linux-gnueabi-ld: drivers/nvme/host/tcp.o: in function `nvme_tcp_setup_ctrl':
tcp.c:(.text+0x1940): undefined reference to `nvme_tls_psk_default'
The problem is that the compile-time conditionals are inconsistent here,
using a mix of #ifdef CONFIG_NVME_TCP_TLS, IS_ENABLED(CONFIG_NVME_TCP_TLS)
and IS_ENABLED(CONFIG_NVME_KEYRING) checks, with CONFIG_NVME_KEYRING
controlling whether the implementation is actually built.
Change it to use IS_ENABLED(CONFIG_NVME_KEYRING) checks consistently,
which should help readability and make it less error-prone. Combining
it with the check for the ctrl->opts->tls flag lets the compiler drop
all the TLS code in configurations without this feature, which also
helps runtime behavior in addition to avoiding the link failure.
To make it possible for the compiler to build the dead code, both
the tls_handshake_timeout variable and the TLS specific members
of nvme_tcp_queue need to be moved out of the #ifdef block as well,
but at least the former of these gets optimized out again.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20231122224719.4042108-4-arnd@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When the NVME target code is built-in but its TCP frontend is a loadable
module, enabling keyring support causes a link failure:
x86_64-linux-ld: vmlinux.o: in function `nvmet_ports_make':
configfs.c:(.text+0x100a211): undefined reference to `nvme_keyring_id'
The problem is that CONFIG_NVME_TARGET_TCP_TLS is a 'bool' symbol that
depends on the tristate CONFIG_NVME_TARGET_TCP, so any 'select' from
it inherits the state of the tristate symbol rather than the intended
CONFIG_NVME_TARGET one that contains the actual call.
The same thing is true for CONFIG_KEYS, which itself is required for
NVME_KEYRING.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20231122224719.4042108-3-arnd@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In configurations without CONFIG_NVME_TARGET_TCP_TLS, the keyring
code might not be available, or using it will result in a runtime
failure:
x86_64-linux-ld: vmlinux.o: in function `nvmet_ports_make':
configfs.c:(.text+0x100a211): undefined reference to `nvme_keyring_id'
Add a check to ensure we only check the keyring if there is a chance
of it being used, which avoids both the runtime and link-time
problems.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20231122224719.4042108-2-arnd@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In order to make sure I get CC'd on tracing changes for which my input
would be relevant, add my name as reviewer of the TRACING subsystem.
Link: https://lore.kernel.org/linux-trace-kernel/20231115155018.8236-1-mathieu.desnoyers@efficios.com
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Since the locking of the parent->d_inode has been moved outside the
creation of the files and directories (as it use to be locked via a
conditional), add a WARN_ON_ONCE() to the case that it's not locked.
Link: https://lkml.kernel.org/r/20231121231112.853962542@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The eventfs directory is dynamically created via the meta data supplied by
the existing trace events. All files and directories in eventfs has a
parent. Do not allow NULL to be passed into eventfs_start_creating() as
the parent because that should never happen. Warn if it does.
Link: https://lkml.kernel.org/r/20231121231112.693841807@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The both create_file_dentry() and create_dir_dentry() takes a boolean
parameter "lookup", as on lookup the inode_lock should already be taken,
but for dcache_dir_open_wrapper() it is not taken.
There's no reason that the dcache_dir_open_wrapper() can't take the
inode_lock before calling these functions. In fact, it's better if it
does, as the lock can be held throughout both directory and file
creations.
This also simplifies the code, and possibly prevents unexpected race
conditions when the lock is released.
Link: https://lkml.kernel.org/r/20231121231112.528544825@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 5790b1fb3d672 ("eventfs: Remove eventfs_file and just use eventfs_inode")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
If memory reclaim happens, it can reclaim file system pages. The file
system pages from eventfs may take the eventfs_mutex on reclaim. This
means that allocation while holding the eventfs_mutex must not call into
filesystem reclaim. A lockdep splat uncovered this.
Link: https://lkml.kernel.org/r/20231121231112.373501894@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 28e12c09f5aa0 ("eventfs: Save ownership and mode")
Fixes: 5790b1fb3d672 ("eventfs: Remove eventfs_file and just use eventfs_inode")
Reported-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
When CONFIG_RODATA_FULL_DEFAULT_ENABLED=y, passing "rodata=on" on the
kernel command-line (rather than "rodata=full") should turn off the
"full" behaviour, leaving writable linear aliases of read-only kernel
memory. Unfortunately, the option has no effect in this situation and
the only way to disable the "rodata=full" behaviour is to disable rodata
protection entirely by passing "rodata=off".
Fix this by parsing the "on" and "off" options in the arch code,
additionally enforcing that 'rodata_full' cannot be set without also
setting 'rodata_enabled', allowing us to simplify a couple of checks
in the process.
Fixes: 2e8cff0a0eee ("arm64: fix rodata=full")
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20231117131422.29663-1-will@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Fix several build errors, a potential kernel panic, a cpu hotplug
issue and update links in documentations"
* tag 'loongarch-fixes-6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
Docs/zh_CN/LoongArch: Update links in LoongArch introduction.rst
Docs/LoongArch: Update links in LoongArch introduction.rst
LoongArch: Implement constant timer shutdown interface
LoongArch: Mark {dmw,tlb}_virt_to_page() exports as non-GPL
LoongArch: Silence the boot warning about 'nokaslr'
LoongArch: Add __percpu annotation for __percpu_read()/__percpu_write()
LoongArch: Record pc instead of offset in la_abs relocation
LoongArch: Explicitly set -fdirect-access-external-data for vmlinux
LoongArch: Add dependency between vmlinuz.efi and vmlinux.efi
|
|
When we're recovering ondisk quota records from the log, we need to
validate the recovered buffer contents before writing them to disk.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Since the introduction of xfs_dqblk in V5, xfs really ought to find the
dqblk pointer from the dquot buffer, then compute the xfs_disk_dquot
pointer from the dqblk pointer. Fix the open-coded xfs_buf_offset calls
and do the type checking in the correct order.
Note that this has made no practical difference since the start of the
xfs_disk_dquot is coincident with the start of the xfs_dqblk.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- One fix for the KVP daemon (Ani Sinha)
- Fix for the detection of E820_TYPE_PRAM in a Gen2 VM (Saurabh Sengar)
- Micro-optimization for hv_nmi_unknown() (Uros Bizjak)
* tag 'hyperv-fixes-signed-20231121' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
x86/hyperv: Use atomic_try_cmpxchg() to micro-optimize hv_nmi_unknown()
x86/hyperv: Fix the detection of E820_TYPE_PRAM in a Gen2 VM
hv/hv_kvp_daemon: Some small fixes for handling NM keyfiles
|
|
We really don't want to do atomic_read() or anything like that, since we
already have the value, not the lock. The whole point of this is that
we've loaded the lock from memory, and we want to check whether the
value we loaded was a locked one or not.
The main use of this is the lockref code, which loads both the lock and
the reference count in one atomic operation, and then works on that
combined value. With the atomic_read(), the compiler would pointlessly
spill the value to the stack, in order to then be able to read it back
"atomically".
This is the qspinlock version of commit c6f4a9002252 ("asm-generic:
ticket-lock: Optimize arch_spin_value_unlocked()") which fixed this same
bug for ticket locks.
Cc: Guo Ren <guoren@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Waiman Long <longman@redhat.com>
Link: https://lore.kernel.org/all/CAHk-=whNRv0v6kQiV5QO6DJhjH4KEL36vWQ6Re8Csrnh4zbRkQ@mail.gmail.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull NVMe fixes from Keith:
"nvme fixes for Linux 6.7
- TCP TLS fixes (Hannes)
- Authentifaction fixes (Mark, Hannes)
- Properly terminate target names (Christoph)"
* tag 'nvme-6.7-2023-11-22' of git://git.infradead.org/nvme:
nvme: move nvme_stop_keep_alive() back to original position
nvmet-tcp: always initialize tls_handshake_tmo_work
nvmet: nul-terminate the NQNs passed in the connect command
nvme: blank out authentication fabrics options if not configured
nvme: catch errors from nvme_configure_metadata()
nvme-tcp: only evaluate 'tls' option if TLS is selected
nvme-auth: set explanation code for failure2 msgs
nvme-auth: unlock mutex in one place only
|
|
Stopping keep-alive not only stops the keep-alive workqueue,
but also needs to be synchronized with I/O termination as we
must not send a keep-alive command after all I/O had been
terminated.
So to avoid any regressions move the call to stop_keep_alive()
back to its original position and ensure that keep-alive is
correctly stopped failing to setup the admin queue.
Fixes: 4733b65d82bd ("nvme: start keep-alive after admin queue setup")
Suggested-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
For some unknown reason the regular expression for checkstack only matches
three digit numbers starting with the number "3", or any higher
number. Which means that it skips any stack sizes smaller than 304
bytes. This makes the checkstack script a bit less useful than it could be.
Change the script to match any number. To be filtered out stack sizes
can be configured with the min_stack variable, which omits any stack
frame sizes smaller than 100 bytes by default.
Tested-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
In the meantime hopefully most people got used to forward
declarations, therefore remove the explanation.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Add missing IPL_TYPE_ECKD_DUMP case to ipl_init() creating
ECKD ipl device attribute group similar to IPL_TYPE_ECKD case.
Commit e2d2a2968f2a ("s390/ipl: add eckd dump support") should
have had it from the beginning.
Fixes: e2d2a2968f2a ("s390/ipl: add eckd dump support")
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Setting event::hw.last_tag to zero is not necessary. The memory
for each event is dynamically allocated by the kernel common code and
initialized to zero already. Remove this unnecessary assignment.
Move the comment to function paicrypt_start() for clarification.
Suggested-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Make sure to free the "urs" platform device, which is created for some
ACPI platforms, on probe errors and on driver unbind.
Compile-tested only.
Fixes: c25c210f590e ("usb: dwc3: qcom: add URS Host support for sdm845 ACPI boot")
Cc: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Andrew Halaney <ahalaney@redhat.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20231117173650.21161-4-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Make sure to remove the software node also on (ACPI) probe errors to
avoid leaking the underlying resources.
Note that the software node is only used for ACPI probe so the driver
unbind tear down is updated to match probe.
Fixes: 8dc6e6dd1bee ("usb: dwc3: qcom: Constify the software node")
Cc: stable@vger.kernel.org # 5.12
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20231117173650.21161-3-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The driver needs to deregister and free the newly allocated dwc3 core
platform device on ACPI probe errors (e.g. probe deferral) and on driver
unbind but instead it leaked those resources while erroneously dropping
a reference to the parent platform device which is still in use.
For OF probing the driver takes a reference to the dwc3 core platform
device which has also always been leaked.
Fix the broken ACPI tear down and make sure to drop the dwc3 core
reference for both OF and ACPI.
Fixes: 8fd95da2cfb5 ("usb: dwc3: qcom: Release the correct resources in dwc3_qcom_remove()")
Fixes: 2bc02355f8ba ("usb: dwc3: qcom: Add support for booting with ACPI")
Fixes: a4333c3a6ba9 ("usb: dwc3: Add Qualcomm DWC3 glue driver")
Cc: stable@vger.kernel.org # 4.18
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Lee Jones <lee@kernel.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20231117173650.21161-2-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use the IRQF_NO_AUTOEN irq flag when requesting the wakeup interrupts
instead of setting it separately.
No functional change intended.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20231120161607.7405-4-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The Qualcomm glue driver is overriding the interrupt trigger types
defined by firmware when requesting the wakeup interrupts during probe.
This can lead to a failure to map the DP/DM wakeup interrupts after a
probe deferral as the firmware defined trigger types do not match the
type used for the initial mapping:
irq: type mismatch, failed to map hwirq-14 for interrupt-controller@b220000!
irq: type mismatch, failed to map hwirq-15 for interrupt-controller@b220000!
Fix this by not overriding the firmware provided trigger types when
requesting the wakeup interrupts.
Fixes: a4333c3a6ba9 ("usb: dwc3: Add Qualcomm DWC3 glue driver")
Cc: stable@vger.kernel.org # 4.18
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20231120161607.7405-3-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The DP/DM wakeup interrupts are edge triggered and which edge to trigger
on depends on use-case and whether a Low speed or Full/High speed device
is connected.
Fixes: 3828026c9ec8 ("dt-bindings: usb: qcom,dwc3: Convert USB DWC3 bindings")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20231120161607.7405-2-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add support for the Microchip USB5744 USB3.0 and USB2.0 Hub.
The Microchip USB5744 supports two power supplies, one for 1V2 and one
for 3V3. According to the datasheet there is no need for a delay between
power on and reset, so this value is set to 0.
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Cc: stable <stable@kernel.org>
Acked-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20231113145921.30104-3-francesco@dolcini.it
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The USB5744 has two power supplies one for 3V3 and one for 1V2. Add the
second supply to the USB5744 DT binding.
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20231113145921.30104-2-francesco@dolcini.it
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit efa5f1311c4998e9e6317c52bc5ee93b3a0f36df.
I couldn't reproduce the reported issue. What I did, based on a pcap
packet log provided by the reporter:
- Used same chip version (RTL8168h)
- Set MAC address to the one used on the reporters system
- Replayed the EAPOL unicast packet that, according to the reporter,
was filtered out by the mc filter.
The packet was properly received.
Therefore the root cause of the reported issue seems to be somewhere
else. Disabling mc filtering completely for the most common chip
version is a quite big hammer. Therefore revert the change and wait
for further analysis results from the reporter.
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Not all LJCA chips implement SPI and on chips without SPI reading
the SPI descriptors will timeout.
On laptop models like the Dell Latitude 9420, this is expected behavior
and not an error.
Modify the driver to continue without instantiating a SPI auxbus child,
instead of failing to probe() the whole LJCA chip.
Fixes: acd6199f195d ("usb: Add support for Intel LJCA device")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Wentong Wu <wentong.wu@intel.com>
Link: https://lore.kernel.org/r/20231104175104.38786-1-hdegoede@redhat.com
Link: https://lore.kernel.org/r/20231121203205.223047-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We found a data corruption issue during testing of SMC-R on Redis
applications.
The benchmark has a low probability of reporting a strange error as
shown below.
"Error: Protocol error, got "\xe2" as reply type byte"
Finally, we found that the retrieved error data was as follows:
0xE2 0xD4 0xC3 0xD9 0x04 0x00 0x2C 0x20 0xA6 0x56 0x00 0x16 0x3E 0x0C
0xCB 0x04 0x02 0x01 0x00 0x00 0x20 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xE2
It is quite obvious that this is a SMC DECLINE message, which means that
the applications received SMC protocol message.
We found that this was caused by the following situations:
client server
¦ clc proposal
------------->
¦ clc accept
<-------------
¦ clc confirm
------------->
wait llc confirm
send llc confirm
¦failed llc confirm
¦ x------
(after 2s)timeout
wait llc confirm rsp
wait decline
(after 1s) timeout
(after 2s) timeout
¦ decline
-------------->
¦ decline
<--------------
As a result, a decline message was sent in the implementation, and this
message was read from TCP by the already-fallback connection.
This patch double the client timeout as 2x of the server value,
With this simple change, the Decline messages should never cross or
collide (during Confirm link timeout).
This issue requires an immediate solution, since the protocol updates
involve a more long-term solution.
Fixes: 0fb0b02bd6fd ("net/smc: adapt SMC client code to use the LLC flow")
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzbot reported an memory leak that happens when an skb is add to
send_buff after virtual nci closed.
This patch adds a variable to track if the ndev is running before
handling new skb in send function.
Signed-off-by: Nguyen Dinh Phi <phind.uet@gmail.com>
Reported-by: syzbot+6eb09d75211863f15e3e@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/lkml/00000000000075472b06007df4fb@google.com
Reviewed-by: Bongsu Jeon
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Honor MagicBook 13 2023 has a touchpad which do not switch to the multitouch
mode until the input mode feature is written by the host. The touchpad do
report the input mode at touchpad(3), while itself working under mouse mode. As
a workaround, it is possible to call MT_QUIRE_FORCE_GET_FEATURE to force set
feature in mt_set_input_mode for such device.
The touchpad reports as BLTP7853, which cannot retrive any useful manufacture
information on the internel by this string at present. As the serial number of
the laptop is GLO-G52, while DMI info reports the laptop serial number as
GLO-GXXX, this workaround should applied to all models which has the GLO-GXXX.
Signed-off-by: Aoba K <nexp_0x17@outlook.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Some devices managed by this driver automatically set brightness to 0
before entering a suspended state and reset it back to a default
brightness level after the resume:
this has the effect of having the kernel report wrong brightness
status after a sleep, and on some devices (like the Asus RC71L) that
brightness is the intensity of LEDs directly facing the user.
Fix the above issue by setting back brightness to the level it had
before entering a sleep state.
Signed-off-by: Denis Benato <benato.denis96@gmail.com>
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
In the function asus_kbd_set_report the parameter buf is read-only
as it gets copied in a memory portion suitable for USB transfer,
but the parameter is not marked as const: add the missing const and mark
const immutable buffers passed to that function.
Signed-off-by: Denis Benato <benato.denis96@gmail.com>
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Add support for Fibocom L716-EU module series.
L716-EU is a Fibocom module based on ZTE's V3E/V3T chipset.
Device creates multiple interfaces when connected to PC as follows:
- Network Interface: ECM or RNDIS (set by FW or AT Command)
- ttyUSB0: AT port
- ttyUSB1: Modem port
- ttyUSB2: AT2 port
- ttyUSB3: Trace port for log information
- ADB: ADB port for debugging. ("Driver=usbfs" when ADB server enabled)
Here are the outputs of lsusb and usb-devices:
$ ls /dev/ttyUSB*
/dev/ttyUSB0 /dev/ttyUSB1 /dev/ttyUSB2 /dev/ttyUSB3
usb-devices:
L716-EU (ECM mode):
T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 51 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=2cb7 ProdID=0001 Rev= 1.00
S: Manufacturer=Fibocom,Incorporated
S: Product=Fibocom Mobile Boardband
S: SerialNumber=1234567890ABCDEF
C:* #Ifs= 7 Cfg#= 1 Atr=e0 MxPwr=500mA
A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether
E: Ad=87(I) Atr=03(Int.) MxPS= 16 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
L716-EU (RNDIS mode):
T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 49 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=2cb7 ProdID=0001 Rev= 1.00
S: Manufacturer=Fibocom,Incorporated
S: Product=Fibocom Mobile Boardband
S: SerialNumber=1234567890ABCDEF
C:* #Ifs= 7 Cfg#= 1 Atr=e0 MxPwr=500mA
A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=03
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=ff Driver=rndis_host
E: Ad=87(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: Victor Fragoso <victorffs@hotmail.com>
Reviewed-by: Lars Melin <larsm17@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Use atomic_try_cmpxchg() instead of atomic_cmpxchg(*ptr, old, new) == old
in hv_nmi_unknown(). On x86 the CMPXCHG instruction returns success in
the ZF flag, so this change saves a compare after CMPXCHG. The generated
asm code improves from:
3e: 65 8b 15 00 00 00 00 mov %gs:0x0(%rip),%edx
45: b8 ff ff ff ff mov $0xffffffff,%eax
4a: f0 0f b1 15 00 00 00 lock cmpxchg %edx,0x0(%rip)
51: 00
52: 83 f8 ff cmp $0xffffffff,%eax
55: 0f 95 c0 setne %al
to:
3e: 65 8b 15 00 00 00 00 mov %gs:0x0(%rip),%edx
45: b8 ff ff ff ff mov $0xffffffff,%eax
4a: f0 0f b1 15 00 00 00 lock cmpxchg %edx,0x0(%rip)
51: 00
52: 0f 95 c0 setne %al
No functional change intended.
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20231114170038.381634-1-ubizjak@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20231114170038.381634-1-ubizjak@gmail.com>
|
|
We should clean the skb resource if genlmsg_put_reply failed.
Fixes: 9d71b54b65b1 ("dpll: netlink: Add DPLL framework base functions")
Signed-off-by: Hao Ge <gehao@kylinos.cn>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://lore.kernel.org/r/20231121013709.73323-1-gehao@kylinos.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2023-11-21
We've added 19 non-merge commits during the last 4 day(s) which contain
a total of 18 files changed, 1043 insertions(+), 416 deletions(-).
The main changes are:
1) Fix BPF verifier to validate callbacks as if they are called an unknown
number of times in order to fix not detecting some unsafe programs,
from Eduard Zingerman.
2) Fix bpf_redirect_peer() handling which missed proper stats accounting
for veth and netkit and also generally fix missing stats for the latter,
from Peilin Ye, Daniel Borkmann et al.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: check if max number of bpf_loop iterations is tracked
bpf: keep track of max number of bpf_loop callback iterations
selftests/bpf: test widening for iterating callbacks
bpf: widening for callback iterators
selftests/bpf: tests for iterating callbacks
bpf: verify callbacks as if they are called unknown number of times
bpf: extract setup_func_entry() utility function
bpf: extract __check_reg_arg() utility function
selftests/bpf: fix bpf_loop_bench for new callback verification scheme
selftests/bpf: track string payload offset as scalar in strobemeta
selftests/bpf: track tcp payload offset as scalar in xdp_synproxy
selftests/bpf: Add netkit to tc_redirect selftest
selftests/bpf: De-veth-ize the tc_redirect test case
bpf, netkit: Add indirect call wrapper for fetching peer dev
bpf: Fix dev's rx stats for bpf_redirect_peer traffic
veth: Use tstats per-CPU traffic counters
netkit: Add tstats per-CPU traffic counters
net: Move {l,t,d}stats allocation to core and convert veth & vrf
net, vrf: Move dstats structure to core
====================
Link: https://lore.kernel.org/r/20231121193113.11796-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There has been more than a few threads which went idle before
the merge window and now people came back to them and started
asking about next steps.
We currently tell people to be patient and not to repost too
often. Our "not too often", however, is still a few orders of
magnitude faster than other subsystems. Or so I feel after
hearing people talk about review rates at LPC.
Clarify in the doc that if the discussion went idle for a week
on netdev, 95% of the time there's no point waiting longer.
Link: https://lore.kernel.org/r/20231120200109.620392-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Using generic ASIX Electronics Corp. AX88179 Gigabit Ethernet device,
the following test cycle has been implemented:
- power on
- check logs
- shutdown
- after detecting the system shutdown, disconnect power
- after approximately 60 seconds of sleep, power is restored
Running some cycles, sometimes error logs like this appear:
kernel: ax88179_178a 2-9:1.0 (unnamed net_device) (uninitialized): Failed to write reg index 0x0001: -19
kernel: ax88179_178a 2-9:1.0 (unnamed net_device) (uninitialized): Failed to read reg index 0x0001: -19
...
These failed operation are happening during ax88179_reset execution, so
the initialization could not be correct.
In order to avoid this, we need to increase the delay after reset and
clock initial operations. By using these larger values, many cycles
have been run and no failed operations appear.
It would be better to check some status register to verify when the
operation has finished, but I do not have found any available information
(neither in the public datasheets nor in the manufacturer's driver). The
only available information for the necessary delays is the maufacturer's
driver (original values) but the proposed values are not enough for the
tested devices.
Fixes: e2ca90c276e1f ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver")
Reported-by: Herb Wei <weihao.bj@ieisystem.com>
Tested-by: Herb Wei <weihao.bj@ieisystem.com>
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Link: https://lore.kernel.org/r/20231120120642.54334-1-jtornosm@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This probably isn't the ideal fix, but we ended up using chids
sparsely, and lots of things rely on indexing into the full range,
so just allocate the full range up front.
The GSP code fixes 8 channels into a userd page, but we end up using
a single userd page per channel so end up sparsely using the range.
Fixes a few crashes seen with multiple channels.
Link: https://gitlab.freedesktop.org/drm/nouveau/-/issues/277
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231121201109.2988516-1-airlied@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers fixes from Ilpo Järvinen:
"Just a few fixes (one with two non-fix deps) plus tidying up
MAINTAINERS"
* tag 'platform-drivers-x86-v6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: intel_telemetry: Fix kernel doc descriptions
MAINTAINERS: Drop Mark Gross as maintainer for x86 platform drivers
platform/x86/amd/pmc: adjust getting DRAM size behavior
platform/x86: hp-bioscfg: Remove unused obj in hp_add_other_attributes()
platform/x86: hp-bioscfg: Fix error handling in hp_add_other_attributes()
platform/x86: hp-bioscfg: move mutex_lock() down in hp_add_other_attributes()
platform/x86: hp-bioscfg: Simplify return check in hp_add_other_attributes()
platform/x86: ideapad-laptop: Set max_brightness before using it
MAINTAINERS: Remove stale entry for SBL platform driver
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
- Tidy up erofs_read_inode() for simplicity
- Fix broken fscache mode due to NULL dereference of dif->bdev_handle
- Add the EROFS webpage to MAINTAINERS, documentation, and Kconfig
* tag 'erofs-for-6.7-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
MAINTAINERS: erofs: add EROFS webpage
erofs: fix NULL dereference of dif->bdev_handle in fscache mode
erofs: simplify erofs_read_inode()
|
|
The refresh reported by modetest is 60.46Hz, and the actual measurement
is 60.01Hz, which is outside the expected tolerance. Adjust hporch and
pixel clock to fix it. After repair, modetest and actual measurement were
all 60.01Hz.
Modetest refresh = Pixel CLK/ htotal* vtotal, but measurement frame rate
is HS->LP cycle time(Vblanking). Measured frame rate is not only affecte
by Htotal/Vtotal/pixel clock, also affected by Lane-num/PixelBit/LineTime
/DSI CLK. Assume that the DSI controller could not make the mode that we
requested(presumably it's PLL couldn't generate the exact pixel clock?).
If you use a different DSI controller, you may need to readjust these
parameters. Now this panel looks like it's only used by me on the MTK
platform, so let's change this set of parameters.
Fixes: 1bc2ef065f13 ("drm/panel: Support for Starry-himax83102-j02 TDDI MIPI-DSI panel")
Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231120020109.3216343-1-yangcong5@huaqin.corp-partner.google.com
|
|
The AMD side of the loader issues the microcode revision for each
logical thread on the system, which can become really noisy on huge
machines. And doing that doesn't make a whole lot of sense - the
microcode revision is already in /proc/cpuinfo.
So in case one is interested in the theoretical support of mixed silicon
steppings on AMD, one can check there.
What is also missing on the AMD side - something which people have
requested before - is showing the microcode revision the CPU had
*before* the early update.
So abstract that up in the main code and have the BSP on each vendor
provide those revision numbers.
Then, dump them only once on driver init.
On Intel, do not dump the patch date - it is not needed.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/CAHk-=wg=%2B8rceshMkB4VnKxmRccVLtBLPBawnewZuuqyx5U=3A@mail.gmail.com
|
|
First of all, the print is useless. The driver will either load and say
which microcode revision the machine has or issue an error.
Then, the version number is meaningless and actively confusing, as Yazen
mentioned recently: when a subset of patches are backported to a distro
kernel, one can't assume the driver version is the same as the upstream
one. And besides, the version number of the loader hasn't been used and
incremented for a long time. So drop it.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20231115210212.9981-2-bp@alien8.de
|
|
If a socket is processing ioctl 'NBD_SET_SOCK', config->socks might be
krealloc in nbd_add_socket(), and a garbage request is received now, a UAF
may occurs.
T1
nbd_ioctl
__nbd_ioctl
nbd_add_socket
blk_mq_freeze_queue
T2
recv_work
nbd_read_reply
sock_xmit
krealloc config->socks
def config->socks
Pass nbd_sock to nbd_read_reply(). And introduce a new function
sock_xmit_recv(), which differs from sock_xmit only in the way it get
socket.
==================================================================
BUG: KASAN: use-after-free in sock_xmit+0x525/0x550
Read of size 8 at addr ffff8880188ec428 by task kworker/u12:1/18779
Workqueue: knbd4-recv recv_work
Call Trace:
__dump_stack
dump_stack+0xbe/0xfd
print_address_description.constprop.0+0x19/0x170
__kasan_report.cold+0x6c/0x84
kasan_report+0x3a/0x50
sock_xmit+0x525/0x550
nbd_read_reply+0xfe/0x2c0
recv_work+0x1c2/0x750
process_one_work+0x6b6/0xf10
worker_thread+0xdd/0xd80
kthread+0x30a/0x410
ret_from_fork+0x22/0x30
Allocated by task 18784:
kasan_save_stack+0x1b/0x40
kasan_set_track
set_alloc_info
__kasan_kmalloc
__kasan_kmalloc.constprop.0+0xf0/0x130
slab_post_alloc_hook
slab_alloc_node
slab_alloc
__kmalloc_track_caller+0x157/0x550
__do_krealloc
krealloc+0x37/0xb0
nbd_add_socket
+0x2d3/0x880
__nbd_ioctl
nbd_ioctl+0x584/0x8e0
__blkdev_driver_ioctl
blkdev_ioctl+0x2a0/0x6e0
block_ioctl+0xee/0x130
vfs_ioctl
__do_sys_ioctl
__se_sys_ioctl+0x138/0x190
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x61/0xc6
Freed by task 18784:
kasan_save_stack+0x1b/0x40
kasan_set_track+0x1c/0x30
kasan_set_free_info+0x20/0x40
__kasan_slab_free.part.0+0x13f/0x1b0
slab_free_hook
slab_free_freelist_hook
slab_free
kfree+0xcb/0x6c0
krealloc+0x56/0xb0
nbd_add_socket+0x2d3/0x880
__nbd_ioctl
nbd_ioctl+0x584/0x8e0
__blkdev_driver_ioctl
blkdev_ioctl+0x2a0/0x6e0
block_ioctl+0xee/0x130
vfs_ioctl
__do_sys_ioctl
__se_sys_ioctl+0x138/0x190
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x61/0xc6
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230911023308.3467802-1-linan666@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commits 7b8ef22ea547 ("usb: xhci: plat: Add USB phy support") and
9134c1fd0503 ("usb: xhci: plat: Add USB 3.0 phy support") added support
for looking up legacy PHYs from the sysdev devicetree node and
initialising them.
This broke drivers such as dwc3 which manages PHYs themself as the PHYs
would now be initialised twice, something which specifically can lead to
resources being left enabled during suspend (e.g. with the
usb_phy_generic PHY driver).
As the dwc3 driver uses driver-name matching for the xhci platform
device, fix this by only looking up and initialising PHYs for devices
that have been matched using OF.
Note that checking that the platform device has a devicetree node would
currently be sufficient, but that could lead to subtle breakages in case
anyone ever tries to reuse an ancestor's node.
Fixes: 7b8ef22ea547 ("usb: xhci: plat: Add USB phy support")
Fixes: 9134c1fd0503 ("usb: xhci: plat: Add USB 3.0 phy support")
Cc: stable@vger.kernel.org # 4.1
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Stanley Chang <stanley_chang@realtek.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Tested-by: Stanley Chang <stanley_chang@realtek.com>
Link: https://lore.kernel.org/r/20231103164323.14294-1-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If there is no fwnode, device_get_match_data() does not
return anything making the probe to always fail. Using
i2c_get_match_data() when there is no fwnode to fix that.
Fixes: 5bd4853da049 ("USB: typec: tps6598x: Add device data to of_device_id")
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20231121114647.2005011-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
It's wrong to use the data length in a CS (in uframe x) to check whether
there is a SS (in uframe x-2), because for a isoc-in ep, it may need some
CS to receive data;
Save the count of SS in a uframe for isoc/intr in-eps to fix the issue.
Fixes: 5c954e030f55 ("usb: xhci-mtk: improve split scheduling by separate IN/OUT budget")
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20231118033011.22033-1-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Allow devices to have dma operations beyond 4K, and avoid warnings such
as:
DMA-API: dwc3 a600000.usb: mapping sg segment longer than device claims to support [len=86016] [max=65536]
Cc: stable@vger.kernel.org
Fixes: 72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver")
Reported-by: Zubin Mithra <zsm@chromium.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20231026-dwc3-v2-1-1d4fd5c3e067@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The BOS descriptor defines a root descriptor and is the base descriptor for
accessing a family of related descriptors.
Function 'usb_get_bos_descriptor()' encounters an iteration issue when
skipping the 'USB_DT_DEVICE_CAPABILITY' descriptor type. This results in
the same descriptor being read repeatedly.
To address this issue, a 'goto' statement is introduced to ensure that the
pointer and the amount read is updated correctly. This ensures that the
function iterates to the next descriptor instead of reading the same
descriptor repeatedly.
Cc: stable@vger.kernel.org
Fixes: 3dd550a2d365 ("USB: usbcore: Fix slab-out-of-bounds bug during device reset")
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20231115121325.471454-1-niklas.neronin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
of_get_compatible_child performs an of_node_get, so an of_node_put is
required. Add platform_device_put to match with of_find_device_by_node.
Fixes: 34c200483569 ("usb: dwc3: add Realtek DHC RTD SoC dwc3 glue layer driver")
Signed-off-by: Stanley Chang <stanley_chang@realtek.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20231117070311.32502-1-stanley_chang@realtek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
dwc2_hc_n_intr() writes back INTMASK as read but evaluates it
with intmask applied. In stress testing this causes spurious
interrupts like this:
[Mon Aug 14 10:51:07 2023] dwc2 3f980000.usb: dwc2_hc_chhltd_intr_dma: Channel 7 - ChHltd set, but reason is unknown
[Mon Aug 14 10:51:07 2023] dwc2 3f980000.usb: hcint 0x00000002, intsts 0x04600001
[Mon Aug 14 10:51:08 2023] dwc2 3f980000.usb: dwc2_hc_chhltd_intr_dma: Channel 0 - ChHltd set, but reason is unknown
[Mon Aug 14 10:51:08 2023] dwc2 3f980000.usb: hcint 0x00000002, intsts 0x04600001
[Mon Aug 14 10:51:08 2023] dwc2 3f980000.usb: dwc2_hc_chhltd_intr_dma: Channel 4 - ChHltd set, but reason is unknown
[Mon Aug 14 10:51:08 2023] dwc2 3f980000.usb: hcint 0x00000002, intsts 0x04600001
[Mon Aug 14 10:51:08 2023] dwc2 3f980000.usb: dwc2_update_urb_state_abn(): trimming xfer length
Applying INTMASK prevents this. The issue exists in all versions of the
driver.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Tested-by: Ivan Ivanov <ivan.ivanov@suse.com>
Tested-by: Andrea della Porta <andrea.porta@suse.com>
Link: https://lore.kernel.org/r/20231115144514.15248-1-oneukum@suse.com
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently the shipped platforms use only _HID to distinguish
ljca children devices. The _ADR support here is for future HW.
This patch is to drop _ADR support and we can then re-introduce
it (revert this patch) if future HW actually starts using _ADR
to distinguish children devices.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231114072531.1366753-1-wentong.wu@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The interrupt service routine registered for the gadget is a primary
handler which mask the interrupt source and a threaded handler which
handles the source of the interrupt. Since the threaded handler is
voluntary threaded, the IRQ-core does not disable bottom halves before
invoke the handler like it does for the forced-threaded handler.
Due to changes in networking it became visible that a network gadget's
completions handler may schedule a softirq which remains unprocessed.
The gadget's completion handler is usually invoked either in hard-IRQ or
soft-IRQ context. In this context it is enough to just raise the softirq
because the softirq itself will be handled once that context is left.
In the case of the voluntary threaded handler, there is nothing that
will process pending softirqs. Which means it remain queued until
another random interrupt (on this CPU) fires and handles it on its exit
path or another thread locks and unlocks a lock with the bh suffix.
Worst case is that the CPU goes idle and the NOHZ complains about
unhandled softirqs.
Disable bottom halves before acquiring the lock (and disabling
interrupts) and enable them after dropping the lock. This ensures that
any pending softirqs will handled right away.
cc: stable@vger.kernel.org
Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20231108093125.224963-1-pawell@cadence.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
TCPM checks for sink caps operational current even when PD is disabled.
This incorrectly sets tcpm_set_charge() when PD is disabled.
Check for sink caps only when PD is enabled.
[ 97.572342] Start toggling
[ 97.578949] CC1: 0 -> 0, CC2: 0 -> 0 [state TOGGLING, polarity 0, disconnected]
[ 99.571648] CC1: 0 -> 0, CC2: 0 -> 4 [state TOGGLING, polarity 0, connected]
[ 99.571658] state change TOGGLING -> SNK_ATTACH_WAIT [rev3 NONE_AMS]
[ 99.571673] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev3 NONE_AMS]
[ 99.741778] state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED [delayed 170 ms]
[ 99.789283] CC1: 0 -> 0, CC2: 4 -> 5 [state SNK_DEBOUNCED, polarity 0, connected]
[ 99.789306] state change SNK_DEBOUNCED -> SNK_DEBOUNCED [rev3 NONE_AMS]
[ 99.903584] VBUS on
[ 99.903591] state change SNK_DEBOUNCED -> SNK_ATTACHED [rev3 NONE_AMS]
[ 99.903600] polarity 1
[ 99.910155] enable vbus discharge ret:0
[ 99.910160] Requesting mux state 1, usb-role 2, orientation 2
[ 99.946791] state change SNK_ATTACHED -> SNK_STARTUP [rev3 NONE_AMS]
[ 99.946798] state change SNK_STARTUP -> SNK_DISCOVERY [rev3 NONE_AMS]
[ 99.946800] Setting voltage/current limit 5000 mV 500 mA
[ 99.946803] vbus=0 charge:=1
[ 100.027139] state change SNK_DISCOVERY -> SNK_READY [rev3 NONE_AMS]
[ 100.027145] Setting voltage/current limit 5000 mV 3000 mA
[ 100.466830] VBUS on
Cc: stable@vger.kernel.org
Fixes: 803b1c8a0cea ("usb: typec: tcpm: not sink vbus if operational current is 0mA")
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Will McVicker <willmcvicker@google.com>
Link: https://lore.kernel.org/r/20231101012845.2701348-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The default mode, configurable by DT, shall be set before usb role switch
driver is registered. Otherwise there is a race between default mode
and mode set by usb role switch driver.
Fixes: 98ed256a4dbad ("usb: dwc3: Add support for role-switch-default-mode binding")
Cc: stable <stable@kernel.org>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20231025095110.2405281-1-alexander.stein@ew.tq-group.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
All error handling end to the error handling path, except these ones.
Go to 'release_fw' as well here, otherwise 'fw' is leaking.
Fixes: 7e7a3c815d22 ("USB: typec: tps6598x: Add TPS25750 support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/23168336f18a9f6cb1a5b47130fc134dc0510d7f.1698648980.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Hard reset queued prior to error recovery (or) received during
error recovery will make TCPM to prematurely exit error recovery
sequence. Ignore hard resets received during error recovery (or)
port reset sequence.
```
[46505.459688] state change SNK_READY -> ERROR_RECOVERY [rev3 NONE_AMS]
[46505.459706] state change ERROR_RECOVERY -> PORT_RESET [rev3 NONE_AMS]
[46505.460433] disable vbus discharge ret:0
[46505.461226] Setting usb_comm capable false
[46505.467244] Setting voltage/current limit 0 mV 0 mA
[46505.467262] polarity 0
[46505.470695] Requesting mux state 0, usb-role 0, orientation 0
[46505.475621] cc:=0
[46505.476012] pending state change PORT_RESET -> PORT_RESET_WAIT_OFF @ 100 ms [rev3 NONE_AMS]
[46505.476020] Received hard reset
[46505.476024] state change PORT_RESET -> HARD_RESET_START [rev3 HARD_RESET]
```
Cc: stable@vger.kernel.org
Fixes: f0690a25a140 ("staging: typec: USB Type-C Port Manager (tcpm)")
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Acked-by: Heikki Krogeus <heikki.krogerus@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20231101021909.2962679-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The example host controller node has two PHYs and therefore needs two
PHY names.
Fixes: 3aa3c66aedef ("dt-bindings: usb: Bring back phy-names")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231110134802.32060-1-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
indirect_call_wrapper.h is not, strictly speaking, networking specific.
However, it's git history indicates that in practice changes go through
netdev and thus the netdev maintainers have effectively been taking
responsibility for it.
Formalise this by adding it to the NETWORKING [GENERAL] section in the
MAINTAINERS file.
It is not clear how many other files under include/linux fall into this
category and it would be interesting, as a follow-up, to audit that and
propose further updates to the MAINTAINERS file as appropriate.
Link: https://lore.kernel.org/netdev/20231116010310.4664dd38@kernel.org/
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231120-indirect_call_wrapper-maintainer-v1-1-0a6bb1f7363e@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This reverts commit 9d1bd9346241cd6963b58da7ffb7ed303285f684.
Multiple people reported misbehaving devices and reverting this commit fixes
the problem for them. As soon as the original commit author starts reacting
again, we can try to figure out why he hasn't seen the issues (mismatching
report descriptors?), but for the time being, fix for 6.7 by reverting.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218172
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218094
Cc: <stable@vger.kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Modify the definition of the two Fibocom FM101R-GL PID macros, which had
their PIDs switched.
The correct PIDs are:
- VID:PID 413C:8213, FM101R-GL ESIM are laptop M.2 cards (with
MBIM interfaces for Linux)
- VID:PID 413C:8215, FM101R-GL are laptop M.2 cards (with
MBIM interface for Linux)
0x8213: mbim, tty
0x8215: mbim, tty
Signed-off-by: Puliang Lu <puliang.lu@fibocom.com>
Fixes: 52480e1f1a25 ("USB: serial: option: add Fibocom to DELL custom modem FM101R-GL")
Link: https://lore.kernel.org/lkml/TYZPR02MB508845BAD7936A62A105CE5D89DFA@TYZPR02MB5088.apcprd02.prod.outlook.com/
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Interface 4 is used by for QMI interface in stock firmware of MF28D, the
router which uses MF290 modem. Free the interface up, to rebind it to
qmi_wwan driver.
The proper configuration is:
Interface mapping is:
0: QCDM, 1: (unknown), 2: AT (PCUI), 2: AT (Modem), 4: QMI
T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 4 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=19d2 ProdID=0189 Rev= 0.00
S: Manufacturer=ZTE, Incorporated
S: Product=ZTE LTE Technologies MSM
C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
Cc: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
When running perf-stat command on Intel hybrid platform, perf-stat
reports the following errors:
sudo taskset -c 7 ./perf stat -vvvv -e cpu_atom/instructions/ sleep 1
Opening: cpu/cycles/:HG
------------------------------------------------------------
perf_event_attr:
type 0 (PERF_TYPE_HARDWARE)
config 0xa00000000
disabled 1
------------------------------------------------------------
sys_perf_event_open: pid 0 cpu -1 group_fd -1 flags 0x8
sys_perf_event_open failed, error -16
Performance counter stats for 'sleep 1':
<not counted> cpu_atom/instructions/
It looks the cpu_atom/instructions/ event can't be enabled on atom PMU
even when the process is pinned on atom core. Investigation shows that
exclusive_event_init() helper always returns -EBUSY error in the perf
event creation. That's strange since the atom PMU should not be an
exclusive PMU.
Further investigation shows the issue was introduced by commit:
97588df87b56 ("perf/x86/intel: Add common intel_pmu_init_hybrid()")
The commit originally intents to clear the bit PERF_PMU_CAP_AUX_OUTPUT
from PMU capabilities if intel_cap.pebs_output_pt_available is not set,
but it incorrectly uses 'or' operation and leads to all PMU capabilities
bits are set to 1 except bit PERF_PMU_CAP_AUX_OUTPUT.
Testing this fix on Intel hybrid platforms, the observed issues
disappear.
Fixes: 97588df87b56 ("perf/x86/intel: Add common intel_pmu_init_hybrid()")
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231121014628.729989-1-dapeng1.mi@linux.intel.com
|
|
Haiyang Zhang says:
====================
hv_netvsc: fix race of netvsc, VF register, and slave bit
There are some races between netvsc probe, set notifier, VF register,
and slave bit setting.
This patch set fixes them.
====================
Link: https://lore.kernel.org/r/1700411023-14317-1-git-send-email-haiyangz@microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When a VF is being exposed form the kernel, it should be marked as "slave"
before exposing to the user-mode. The VF is not usable without netvsc
running as master. The user-mode should never see a VF without the "slave"
flag.
This commit moves the code of setting the slave flag to the time before
VF is exposed to user-mode.
Cc: stable@vger.kernel.org
Fixes: 0c195567a8f6 ("netvsc: transparent VF management")
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
If VF NIC is registered earlier, NETDEV_REGISTER event is replayed,
but NETDEV_POST_INIT is not.
Move register_netdevice_notifier() earlier, so the call back
function is set before probing.
Cc: stable@vger.kernel.org
Fixes: e04e7a7bbd4b ("hv_netvsc: Fix a deadlock by getting rtnl lock earlier in netvsc_probe()")
Reported-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The rtnl lock also needs to be held before rndis_filter_device_add()
which advertises nvsp_2_vsc_capability / sriov bit, and triggers
VF NIC offering and registering. If VF NIC finished register_netdev()
earlier it may cause name based config failure.
To fix this issue, move the call to rtnl_lock() before
rndis_filter_device_add(), so VF will be registered later than netvsc
/ synthetic NIC, and gets a name numbered (ethX) after netvsc.
Cc: stable@vger.kernel.org
Fixes: e04e7a7bbd4b ("hv_netvsc: Fix a deadlock by getting rtnl lock earlier in netvsc_probe()")
Reported-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
net/ipv4/route.c:783:46: warning: incorrect type in argument 2 (different base types)
net/ipv4/route.c:783:46: expected unsigned int [usertype] key
net/ipv4/route.c:783:46: got restricted __be32 [usertype] new_gw
Fixes: 969447f226b4 ("ipv4: use new_gw for redirect neigh lookup")
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Link: https://lore.kernel.org/r/20231119141759.420477-1-chentao@kylinos.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
These devices disconnect if suspended without remote wakeup. They can operate
with the standard driver.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Many user-space compositors fail with mode setting if a CRTC has
more than one connected connector. This is the case with the BMC
on Aspeed systems. Work around this problem by setting the BMC's
connector status to disconnected when the physical connector has
a display attached. This way compositors will only see one connected
connector at a time; either the physical one or the BMC.
Suggested-by: Jocelyn Falempe <jfalempe@redhat.com>
Fixes: e329cb53b45d ("drm/ast: Add BMC virtual connector")
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: <stable@vger.kernel.org> # v6.6+
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231116130217.22931-1-tzimmermann@suse.de
|
|
The Glorious Model I mouse has a buggy HID report descriptor for its
keyboard endpoint (used for programmable buttons). For report ID 2, there
is a mismatch between Logical Minimum and Usage Minimum in the array that
reports keycodes.
The offending portion of the descriptor: (from hid-decode)
0x95, 0x05, // Report Count (5) 30
0x75, 0x08, // Report Size (8) 32
0x15, 0x00, // Logical Minimum (0) 34
0x25, 0x65, // Logical Maximum (101) 36
0x05, 0x07, // Usage Page (Keyboard) 38
0x19, 0x01, // Usage Minimum (1) 40
0x29, 0x65, // Usage Maximum (101) 42
0x81, 0x00, // Input (Data,Arr,Abs) 44
This bug shifts all programmed keycodes up by 1. Importantly, this causes
"empty" array indexes of 0x00 to be interpreted as 0x01, ErrorRollOver.
The presence of ErrorRollOver causes the system to ignore all keypresses
from the endpoint and breaks the ability to use the programmable buttons.
Setting byte 41 to 0x00 fixes this, and causes keycodes to be interpreted
correctly.
Also, USB_VENDOR_ID_GLORIOUS is changed to USB_VENDOR_ID_SINOWEALTH,
and a new ID for Laview Technology is added. Glorious seems to be
white-labeling controller boards or mice from these vendors. There isn't a
single canonical vendor ID for Glorious products.
Signed-off-by: Brett Raye <braye@fastmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
hid_debug_events_release releases resources bound to the HID device instance.
hid_device_release releases the underlying HID device instance potentially
before hid_debug_events_release has completed releasing debug resources bound
to the same HID device instance.
Reference count to prevent the HID device instance from being torn down
preemptively when HID debugging support is used. When count reaches zero,
release core resources of HID device instance using hiddev_free.
The crash:
[ 120.728477][ T4396] kernel BUG at lib/list_debug.c:53!
[ 120.728505][ T4396] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[ 120.739806][ T4396] Modules linked in: bcmdhd dhd_static_buf 8822cu pcie_mhi r8168
[ 120.747386][ T4396] CPU: 1 PID: 4396 Comm: hidt_bridge Not tainted 5.10.110 #257
[ 120.754771][ T4396] Hardware name: Rockchip RK3588 EVB4 LP4 V10 Board (DT)
[ 120.761643][ T4396] pstate: 60400089 (nZCv daIf +PAN -UAO -TCO BTYPE=--)
[ 120.768338][ T4396] pc : __list_del_entry_valid+0x98/0xac
[ 120.773730][ T4396] lr : __list_del_entry_valid+0x98/0xac
[ 120.779120][ T4396] sp : ffffffc01e62bb60
[ 120.783126][ T4396] x29: ffffffc01e62bb60 x28: ffffff818ce3a200
[ 120.789126][ T4396] x27: 0000000000000009 x26: 0000000000980000
[ 120.795126][ T4396] x25: ffffffc012431000 x24: ffffff802c6d4e00
[ 120.801125][ T4396] x23: ffffff8005c66f00 x22: ffffffc01183b5b8
[ 120.807125][ T4396] x21: ffffff819df2f100 x20: 0000000000000000
[ 120.813124][ T4396] x19: ffffff802c3f0700 x18: ffffffc01d2cd058
[ 120.819124][ T4396] x17: 0000000000000000 x16: 0000000000000000
[ 120.825124][ T4396] x15: 0000000000000004 x14: 0000000000003fff
[ 120.831123][ T4396] x13: ffffffc012085588 x12: 0000000000000003
[ 120.837123][ T4396] x11: 00000000ffffbfff x10: 0000000000000003
[ 120.843123][ T4396] x9 : 455103d46b329300 x8 : 455103d46b329300
[ 120.849124][ T4396] x7 : 74707572726f6320 x6 : ffffffc0124b8cb5
[ 120.855124][ T4396] x5 : ffffffffffffffff x4 : 0000000000000000
[ 120.861123][ T4396] x3 : ffffffc011cf4f90 x2 : ffffff81fee7b948
[ 120.867122][ T4396] x1 : ffffffc011cf4f90 x0 : 0000000000000054
[ 120.873122][ T4396] Call trace:
[ 120.876259][ T4396] __list_del_entry_valid+0x98/0xac
[ 120.881304][ T4396] hid_debug_events_release+0x48/0x12c
[ 120.886617][ T4396] full_proxy_release+0x50/0xbc
[ 120.891323][ T4396] __fput+0xdc/0x238
[ 120.895075][ T4396] ____fput+0x14/0x24
[ 120.898911][ T4396] task_work_run+0x90/0x148
[ 120.903268][ T4396] do_exit+0x1bc/0x8a4
[ 120.907193][ T4396] do_group_exit+0x8c/0xa4
[ 120.911458][ T4396] get_signal+0x468/0x744
[ 120.915643][ T4396] do_signal+0x84/0x280
[ 120.919650][ T4396] do_notify_resume+0xd0/0x218
[ 120.924262][ T4396] work_pending+0xc/0x3f0
[ Rahul Rameshbabu <sergeantsagara@protonmail.com>: rework changelog ]
Fixes: cd667ce24796 ("HID: use debugfs for events/reports dumping")
Signed-off-by: Charles Yi <be286@163.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Jamesdonkey A3R keyboard is identified as "Jamesdonkey A3R" in wired
mode, "A3R-U" in wireless mode and "A3R" in bluetooth mode. Adding them
to non-apple keyboards fixes function key.
Signed-off-by: Yihong Cao <caoyihong4@outlook.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
During the probe we add an I2C adapter and as soon as we add that adapter
it may be used for a transfer (e.g via the code in i2cdetect()).
Those transfers are not able to complete and time out. This is because the
HID raw_event callback (mcp2221_raw_event) will not be invoked until the
HID device's 'driver_input_lock' is marked up at the completion of the
probe in hid_device_probe(). This starves the driver of the responses it
is waiting for.
In order to allow the I2C transfers to complete while we are still in the
probe, start the IO once we have completed init of the HID device.
This issue seems to have been seen before and a patch was submitted but
it seems it was never accepted. See:
https://lore.kernel.org/all/20221103222714.21566-3-Enrik.Berkhan@inka.de/
Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
The process of adding an I2C adapter can invoke I2C accesses on that new
adapter (see i2c_detect()).
Ensure we have set the adapter's driver data to avoid null pointer
dereferences in the xfer functions during the adapter add.
This has been noted in the past and the same fix proposed but not
completed. See:
https://lore.kernel.org/lkml/ef597e73-ed71-168e-52af-0d19b03734ac@vigem.de/
Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
There is no need to call MMIO reset using VPU_37XX_BUTTRESS_VPU_IP_RESET
register. IP will be reset by FLR or by entering d0i3. Also IP reset
during power_up is not needed as the VPU is already in reset.
Removing MMIO reset improves stability as it a partial device reset
that is not safe in some corner cases.
This change also brings back ivpu_boot_pwr_domain_disable() that
helps to properly power down VPU when it is hung by a buggy workload.
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Fixes: 828d63042aec ("accel/ivpu: Don't enter d0i3 during FLR")
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231115111004.1304092-1-jacek.lawrynowicz@linux.intel.com
|
|
LKP found issues with a kernel doc in the driver:
core.c:116: warning: Function parameter or member 'ioss_evtconfig' not described in 'telemetry_update_events'
core.c:188: warning: Function parameter or member 'ioss_evtconfig' not described in 'telemetry_get_eventconfig'
It looks like it were copy'n'paste typos when these descriptions
had been introduced. Fix the typos.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310070743.WALmRGSY-lkp@intel.com/
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231120150756.1661425-1-andriy.shevchenko@linux.intel.com
Reviewed-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Mark has not really been active as maintainer for x86 platform drivers
lately, drop Mark from the MAINTAINERS entries for drivers/platform/x86,
drivers/platform/mellanox and drivers/platform/surface.
Cc: Mark Gross <markgross@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20231120154548.611041-1-hdegoede@redhat.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-linus
Mika writes:
thunderbolt: Fixes for v6.7-rc3
This includes following USB4/Thunderbolt fixes for v6.7-rc3:
- Fix a lane bonding issue on ASMedia USB4 device
- Send uevents when link is switched to asymmetric or symmetric
- Only add device router DP IN adapters to the head of resource list
to avoid issues during system resume.
All these have been in linux-next with no reported issues.
* tag 'thunderbolt-for-v6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: (1451 commits)
thunderbolt: Only add device router DP IN to the head of the DP resource list
thunderbolt: Send uevent after asymmetric/symmetric switch
thunderbolt: Set lane bonding bit only for downstream port
|
|
LoongArch-Vol1 has been updated to v1.10, the links in the documentation
are out of date, let's update it.
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
LoongArch-Vol1 has been updated to v1.10, the links in the documentation
are out of date, let's update it.
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
When a cpu is hot-unplugged, it is put in idle state and the function
arch_cpu_idle_dead() is called. The timer interrupt for this processor
should be disabled, otherwise there will be pending timer interrupt for
the unplugged cpu, so that vcpu is prevented from giving up scheduling
when system is running in vm mode.
This patch implements the timer shutdown interface so that the constant
timer will be properly disabled when a CPU is hot-unplugged.
Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Mark {dmw,tlb}_virt_to_page() exports as non-GPL, in order to let
out-of-tree modules (e.g. OpenZFS) be built without errors. Otherwise
we get:
ERROR: modpost: GPL-incompatible module zfs.ko uses GPL-only symbol 'dmw_virt_to_page'
ERROR: modpost: GPL-incompatible module zfs.ko uses GPL-only symbol 'tlb_virt_to_page'
Reported-by: Haowu Ge <gehaowu@bitmoe.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The kernel parameter 'nokaslr' is handled before start_kernel(), so we
don't need early_param() to mark it technically. But it can cause a boot
warning as follows:
Unknown kernel command line parameters "nokaslr", will be passed to user space.
When we use 'init=/bin/bash', 'nokaslr' which passed to user space will
even cause a kernel panic. So we use early_param() to mark 'nokaslr',
simply print a notice and silence the boot warning (also fix a potential
panic). This logic is similar to RISC-V.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
When build kernel with C=1, we get:
arch/loongarch/kernel/process.c:234:46: warning: incorrect type in argument 1 (different address spaces)
arch/loongarch/kernel/process.c:234:46: expected void *ptr
arch/loongarch/kernel/process.c:234:46: got unsigned long [noderef] __percpu *
arch/loongarch/kernel/process.c:234:46: warning: incorrect type in argument 1 (different address spaces)
arch/loongarch/kernel/process.c:234:46: expected void *ptr
arch/loongarch/kernel/process.c:234:46: got unsigned long [noderef] __percpu *
arch/loongarch/kernel/process.c:234:46: warning: incorrect type in argument 1 (different address spaces)
arch/loongarch/kernel/process.c:234:46: expected void *ptr
arch/loongarch/kernel/process.c:234:46: got unsigned long [noderef] __percpu *
arch/loongarch/kernel/process.c:234:46: warning: incorrect type in argument 1 (different address spaces)
arch/loongarch/kernel/process.c:234:46: expected void *ptr
arch/loongarch/kernel/process.c:234:46: got unsigned long [noderef] __percpu *
Add __percpu annotation for __percpu_read()/__percpu_write() can avoid
such warnings. __percpu_xchg() and other functions don't need annotation
because their wrapper, i.e. _pcp_protect(), already suppresses warnings.
Also adjust the indentations in this file.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311080409.LlOfTR3m-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202311080840.Vc2kXhfp-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202311081340.3k72KKdg-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202311120926.cjYHyoYw-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202311152142.g6UyNx1R-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202311160339.DbhaH8LX-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202311181454.CTPrSYmQ-lkp@intel.com/
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
To clarify, the previous version functioned flawlessly. However, it's
worth noting that the LLVM's LoongArch backend currently lacks support
for cross-section label calculations. With this patch, we enable the use
of clang to compile relocatable kernels.
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
After this llvm commit [1], The -fno-pic does not imply direct access
external data. Explicitly set -fdirect-access-external-data for vmlinux
that can avoids GOT entries.
Link: https://github.com/llvm/llvm-project/commit/47eeee297775347cbdb7624d6a766c2a3eec4a59
Suggested-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
A common issue in Makefile is a race in parallel building.
You need to be careful to prevent multiple threads from writing to the
same file simultaneously.
Commit 3939f3345050 ("ARM: 8418/1: add boot image dependencies to not
generate invalid images") addressed such a bad scenario.
A similar symptom occurs with the following command:
$ make -j$(nproc) ARCH=loongarch vmlinux.efi vmlinuz.efi
[ snip ]
SORTTAB vmlinux
OBJCOPY arch/loongarch/boot/vmlinux.efi
OBJCOPY arch/loongarch/boot/vmlinux.efi
PAD arch/loongarch/boot/vmlinux.bin
GZIP arch/loongarch/boot/vmlinuz
OBJCOPY arch/loongarch/boot/vmlinuz.o
LD arch/loongarch/boot/vmlinuz.efi.elf
OBJCOPY arch/loongarch/boot/vmlinuz.efi
The log "OBJCOPY arch/loongarch/boot/vmlinux.efi" is displayed twice.
It indicates that two threads simultaneously enter arch/loongarch/boot/
and write to arch/loongarch/boot/vmlinux.efi.
It occasionally leads to a build failure:
$ make -j$(nproc) ARCH=loongarch vmlinux.efi vmlinuz.efi
[ snip ]
SORTTAB vmlinux
OBJCOPY arch/loongarch/boot/vmlinux.efi
PAD arch/loongarch/boot/vmlinux.bin
truncate: Invalid number: ‘arch/loongarch/boot/vmlinux.bin’
make[2]: *** [drivers/firmware/efi/libstub/Makefile.zboot:13:
arch/loongarch/boot/vmlinux.bin] Error 1
make[2]: *** Deleting file 'arch/loongarch/boot/vmlinux.bin'
make[1]: *** [arch/loongarch/Makefile:146: vmlinuz.efi] Error 2
make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile:234: __sub-make] Error 2
vmlinuz.efi depends on vmlinux.efi, but such a dependency is not
specified in arch/loongarch/Makefile.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Eduard Zingerman says:
====================
verify callbacks as if they are called unknown number of times
This series updates verifier logic for callback functions handling.
Current master simulates callback body execution exactly once,
which leads to verifier not detecting unsafe programs like below:
static int unsafe_on_zero_iter_cb(__u32 idx, struct num_context *ctx)
{
ctx->i = 0;
return 0;
}
SEC("?raw_tp")
int unsafe_on_zero_iter(void *unused)
{
struct num_context loop_ctx = { .i = 32 };
__u8 choice_arr[2] = { 0, 1 };
bpf_loop(100, unsafe_on_zero_iter_cb, &loop_ctx, 0);
return choice_arr[loop_ctx.i];
}
This was reported previously in [0].
The basic idea of the fix is to schedule callback entry state for
verification in env->head until some identical, previously visited
state in current DFS state traversal is found. Same logic as with open
coded iterators, and builds on top recent fixes [1] for those.
The series is structured as follows:
- patches #1,2,3 update strobemeta, xdp_synproxy selftests and
bpf_loop_bench benchmark to allow convergence of the bpf_loop
callback states;
- patches #4,5 just shuffle the code a bit;
- patch #6 is the main part of the series;
- patch #7 adds test cases for #6;
- patch #8 extend patch #6 with same speculative scalar widening
logic, as used for open coded iterators;
- patch #9 adds test cases for #8;
- patch #10 extends patch #6 to track maximal number of callback
executions specifically for bpf_loop();
- patch #11 adds test cases for #10.
Veristat results comparing this series to master+patches #1,2,3 using selftests
show the following difference:
File Program States (A) States (B) States (DIFF)
------------------------- ------------- ---------- ---------- -------------
bpf_loop_bench.bpf.o benchmark 1 2 +1 (+100.00%)
pyperf600_bpf_loop.bpf.o on_event 322 407 +85 (+26.40%)
strobemeta_bpf_loop.bpf.o on_event 113 151 +38 (+33.63%)
xdp_synproxy_kern.bpf.o syncookie_tc 341 291 -50 (-14.66%)
xdp_synproxy_kern.bpf.o syncookie_xdp 344 301 -43 (-12.50%)
Veristat results comparing this series to master using Tetragon BPF
files [2] also show some differences.
States diff varies from +2% to +15% on 23 programs out of 186,
no new failures.
Changelog:
- V3 [5] -> V4, changes suggested by Andrii:
- validate mark_chain_precision() result in patch #10;
- renaming s/cumulative_callback_depth/callback_unroll_depth/.
- V2 [4] -> V3:
- fixes in expected log messages for test cases:
- callback_result_precise;
- parent_callee_saved_reg_precise_with_callback;
- parent_stack_slot_precise_with_callback;
- renamings (suggested by Alexei):
- s/callback_iter_depth/cumulative_callback_depth/
- s/is_callback_iter_next/calls_callback/
- s/mark_callback_iter_next/mark_calls_callback/
- prepare_func_exit() updated to exit with -EFAULT when
callee->in_callback_fn is true but calls_callback() is not true
for callsite;
- test case 'bpf_loop_iter_limit_nested' rewritten to use return
value check instead of verifier log message checks
(suggested by Alexei).
- V1 [3] -> V2, changes suggested by Andrii:
- small changes for error handling code in __check_func_call();
- callback body processing log is now matched in relevant
verifier_subprog_precision.c tests;
- R1 passed to bpf_loop() is now always marked as precise;
- log level 2 message for bpf_loop() iteration termination instead of
iteration depth messages;
- __no_msg macro removed;
- bpf_loop_iter_limit_nested updated to avoid using __no_msg;
- commit message for patch #3 updated according to Alexei's request.
[0] https://lore.kernel.org/bpf/CA+vRuzPChFNXmouzGG+wsy=6eMcfr1mFG0F3g7rbg-sedGKW3w@mail.gmail.com/
[1] https://lore.kernel.org/bpf/20231024000917.12153-1-eddyz87@gmail.com/
[2] git@github.com:cilium/tetragon.git
[3] https://lore.kernel.org/bpf/20231116021803.9982-1-eddyz87@gmail.com/T/#t
[4] https://lore.kernel.org/bpf/20231118013355.7943-1-eddyz87@gmail.com/T/#t
[5] https://lore.kernel.org/bpf/20231120225945.11741-1-eddyz87@gmail.com/T/#t
====================
Link: https://lore.kernel.org/r/20231121020701.26440-1-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Check that even if bpf_loop() callback simulation does not converge to
a specific state, verification could proceed via "brute force"
simulation of maximal number of callback calls.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231121020701.26440-12-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
In some cases verifier can't infer convergence of the bpf_loop()
iteration. E.g. for the following program:
static int cb(__u32 idx, struct num_context* ctx)
{
ctx->i++;
return 0;
}
SEC("?raw_tp")
int prog(void *_)
{
struct num_context ctx = { .i = 0 };
__u8 choice_arr[2] = { 0, 1 };
bpf_loop(2, cb, &ctx, 0);
return choice_arr[ctx.i];
}
Each 'cb' simulation would eventually return to 'prog' and reach
'return choice_arr[ctx.i]' statement. At which point ctx.i would be
marked precise, thus forcing verifier to track multitude of separate
states with {.i=0}, {.i=1}, ... at bpf_loop() callback entry.
This commit allows "brute force" handling for such cases by limiting
number of callback body simulations using 'umax' value of the first
bpf_loop() parameter.
For this, extend bpf_func_state with 'callback_depth' field.
Increment this field when callback visiting state is pushed to states
traversal stack. For frame #N it's 'callback_depth' field counts how
many times callback with frame depth N+1 had been executed.
Use bpf_func_state specifically to allow independent tracking of
callback depths when multiple nested bpf_loop() calls are present.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231121020701.26440-11-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
A test case to verify that imprecise scalars widening is applied to
callback entering state, when callback call is simulated repeatedly.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231121020701.26440-10-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Callbacks are similar to open coded iterators, so add imprecise
widening logic for callback body processing. This makes callback based
loops behave identically to open coded iterators, e.g. allowing to
verify programs like below:
struct ctx { u32 i; };
int cb(u32 idx, struct ctx* ctx)
{
++ctx->i;
return 0;
}
...
struct ctx ctx = { .i = 0 };
bpf_loop(100, cb, &ctx, 0);
...
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231121020701.26440-9-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
A set of test cases to check behavior of callback handling logic,
check if verifier catches the following situations:
- program not safe on second callback iteration;
- program not safe on zero callback iterations;
- infinite loop inside a callback.
Verify that callback logic works for bpf_loop, bpf_for_each_map_elem,
bpf_user_ringbuf_drain, bpf_find_vma.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231121020701.26440-8-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Prior to this patch callbacks were handled as regular function calls,
execution of callback body was modeled exactly once.
This patch updates callbacks handling logic as follows:
- introduces a function push_callback_call() that schedules callback
body verification in env->head stack;
- updates prepare_func_exit() to reschedule callback body verification
upon BPF_EXIT;
- as calls to bpf_*_iter_next(), calls to callback invoking functions
are marked as checkpoints;
- is_state_visited() is updated to stop callback based iteration when
some identical parent state is found.
Paths with callback function invoked zero times are now verified first,
which leads to necessity to modify some selftests:
- the following negative tests required adding release/unlock/drop
calls to avoid previously masked unrelated error reports:
- cb_refs.c:underflow_prog
- exceptions_fail.c:reject_rbtree_add_throw
- exceptions_fail.c:reject_with_cp_reference
- the following precision tracking selftests needed change in expected
log trace:
- verifier_subprog_precision.c:callback_result_precise
(note: r0 precision is no longer propagated inside callback and
I think this is a correct behavior)
- verifier_subprog_precision.c:parent_callee_saved_reg_precise_with_callback
- verifier_subprog_precision.c:parent_stack_slot_precise_with_callback
Reported-by: Andrew Werner <awerner32@gmail.com>
Closes: https://lore.kernel.org/bpf/CA+vRuzPChFNXmouzGG+wsy=6eMcfr1mFG0F3g7rbg-sedGKW3w@mail.gmail.com/
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231121020701.26440-7-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Move code for simulated stack frame creation to a separate utility
function. This function would be used in the follow-up change for
callbacks handling.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231121020701.26440-6-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Split check_reg_arg() into two utility functions:
- check_reg_arg() operating on registers from current verifier state;
- __check_reg_arg() operating on a specific set of registers passed as
a parameter;
The __check_reg_arg() function would be used by a follow-up change for
callbacks handling.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231121020701.26440-5-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This is a preparatory change. A follow-up patch "bpf: verify callbacks
as if they are called unknown number of times" changes logic for
callbacks handling. While previously callbacks were verified as a
single function call, new scheme takes into account that callbacks
could be executed unknown number of times.
This has dire implications for bpf_loop_bench:
SEC("fentry/" SYS_PREFIX "sys_getpgid")
int benchmark(void *ctx)
{
for (int i = 0; i < 1000; i++) {
bpf_loop(nr_loops, empty_callback, NULL, 0);
__sync_add_and_fetch(&hits, nr_loops);
}
return 0;
}
W/o callbacks change verifier sees it as a 1000 calls to
empty_callback(). However, with callbacks change things become
exponential:
- i=0: state exploring empty_callback is scheduled with i=0 (a);
- i=1: state exploring empty_callback is scheduled with i=1;
...
- i=999: state exploring empty_callback is scheduled with i=999;
- state (a) is popped from stack;
- i=1: state exploring empty_callback is scheduled with i=1;
...
Avoid this issue by rewriting outer loop as bpf_loop().
Unfortunately, this adds a function call to a loop at runtime, which
negatively affects performance:
throughput latency
before: 149.919 ± 0.168 M ops/s, 6.670 ns/op
after : 137.040 ± 0.187 M ops/s, 7.297 ns/op
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231121020701.26440-4-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This change prepares strobemeta for update in callbacks verification
logic. To allow bpf_loop() verification converge when multiple
callback iterations are considered:
- track offset inside strobemeta_payload->payload directly as scalar
value;
- at each iteration make sure that remaining
strobemeta_payload->payload capacity is sufficient for execution of
read_{map,str}_var functions;
- make sure that offset is tracked as unbound scalar between
iterations, otherwise verifier won't be able infer that bpf_loop
callback reaches identical states.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231121020701.26440-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This change prepares syncookie_{tc,xdp} for update in callbakcs
verification logic. To allow bpf_loop() verification converge when
multiple callback itreations are considered:
- track offset inside TCP payload explicitly, not as a part of the
pointer;
- make sure that offset does not exceed MAX_PACKET_OFF enforced by
verifier;
- make sure that offset is tracked as unbound scalar between
iterations, otherwise verifier won't be able infer that bpf_loop
callback reaches identical states.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231121020701.26440-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
With the call to simple_recursive_removal() on the entire eventfs sub
system when the directory is removed, it performs the d_invalidate on all
the dentries when it is removed. There's no need to do clean ups when a
dentry is being created while the directory is being deleted.
As dentries are cleaned up by the simpler_recursive_removal(), trying to
do d_invalidate() in these functions will cause the dentry to be
invalidated twice, and crash the kernel.
Link: https://lore.kernel.org/all/20231116123016.140576-1-naresh.kamboju@linaro.org/
Link: https://lkml.kernel.org/r/20231120235154.422970988@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 407c6726ca71 ("eventfs: Use simple_recursive_removal() to clean up dentries")
Reported-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The logic to free the eventfs_inode (ei) use to set is_freed and clear the
"dentry" field under the eventfs_mutex. But that changed when a race was
found where the ei->dentry needed to be cleared when the last dput() was
called on it. But there was still logic that checked if ei->dentry was not
NULL and is_freed is set, and would warn if it was.
But since that situation was changed and the ei->dentry isn't cleared
until the last dput() is called on it while the ei->is_freed is set, do
not test for that condition anymore, and change the comments to reflect
that.
Link: https://lkml.kernel.org/r/20231120235154.265826243@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 020010fbfa20 ("eventfs: Delete eventfs_inode when the last dentry is freed")
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
If the offset equals the bv_len of the first registered bvec, then the
request does not include any of that first bvec. Skip it so that drivers
don't have to deal with a zero length bvec, which was observed to break
NVMe's PRP list creation.
Cc: stable@vger.kernel.org
Fixes: bd11b3a391e3 ("io_uring: don't use iov_iter_advance() for fixed buffers")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20231120221831.2646460-1-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In dasd_profile_start() the amount of requests on the device queue are
counted. The access to the device queue is unprotected against
concurrent access. With a lot of parallel I/O, especially with alias
devices enabled, the device queue can change while dasd_profile_start()
is accessing the queue. In the worst case this leads to a kernel panic
due to incorrect pointer accesses.
Fix this by taking the device lock before accessing the queue and
counting the requests. Additionally the check for a valid profile data
pointer can be done earlier to avoid unnecessary locking in a hot path.
Cc: <stable@vger.kernel.org>
Fixes: 4fa52aa7a82f ("[S390] dasd: add enhanced DASD statistics interface")
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20231025132437.1223363-3-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
resolve typing mistake from pimary to primary
Signed-off-by: Muhammad Muzammil <m.muzzammilashraf@gmail.com>
Link: https://lore.kernel.org/r/20231010043140.28416-1-m.muzzammilashraf@gmail.com
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20231025132437.1223363-2-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Daniel Borkmann says:
====================
This fixes bpf_redirect_peer stats accounting for veth and netkit,
and adds tstats in the first place for the latter. Utilise indirect
call wrapper for bpf_redirect_peer, and improve test coverage of the
latter also for netkit devices. Details in the patches, thanks!
The series was targeted at bpf originally, and is done here as well,
so it can trigger BPF CI. Jakub, if you think directly going via net
is better since the majority of the diff touches net anyway, that is
fine, too.
Thanks!
v2 -> v3:
- Add kdoc for pcpu_stat_type (Simon)
- Reject invalid type value in netdev_do_alloc_pcpu_stats (Simon)
- Add Reviewed-by tags from list
v1 -> v2:
- Move stats allocation/freeing into net core (Jakub)
- As prepwork for the above, move vrf's dstats over into the core
- Add a check into stats alloc to enforce tstats upon
implementing ndo_get_peer_dev
- Add Acked-by tags from list
Daniel Borkmann (6):
net, vrf: Move dstats structure to core
net: Move {l,t,d}stats allocation to core and convert veth & vrf
netkit: Add tstats per-CPU traffic counters
bpf, netkit: Add indirect call wrapper for fetching peer dev
selftests/bpf: De-veth-ize the tc_redirect test case
selftests/bpf: Add netkit to tc_redirect selftest
====================
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Extend the existing tc_redirect selftest to also cover netkit devices
for exercising the bpf_redirect_peer() code paths, so that we have both
veth as well as netkit covered, all tests still pass after this change.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20231114004220.6495-9-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
No functional changes to the test case, but just renaming various functions,
variables, etc, to remove veth part of their name for making it more generic
and reusable later on (e.g. for netkit).
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20231114004220.6495-8-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
ndo_get_peer_dev is used in tcx BPF fast path, therefore make use of
indirect call wrapper and therefore optimize the bpf_redirect_peer()
internal handling a bit. Add a small skb_get_peer_dev() wrapper which
utilizes the INDIRECT_CALL_1() macro instead of open coding.
Future work could potentially add a peer pointer directly into struct
net_device in future and convert veth and netkit over to use it so
that eventually ndo_get_peer_dev can be removed.
Co-developed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20231114004220.6495-7-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Traffic redirected by bpf_redirect_peer() (used by recent CNIs like Cilium)
is not accounted for in the RX stats of supported devices (that is, veth
and netkit), confusing user space metrics collectors such as cAdvisor [0],
as reported by Youlun.
Fix it by calling dev_sw_netstats_rx_add() in skb_do_redirect(), to update
RX traffic counters. Devices that support ndo_get_peer_dev _must_ use the
@tstats per-CPU counters (instead of @lstats, or @dstats).
To make this more fool-proof, error out when ndo_get_peer_dev is set but
@tstats are not selected.
[0] Specifically, the "container_network_receive_{byte,packet}s_total"
counters are affected.
Fixes: 9aa1206e8f48 ("bpf: Add redirect_peer helper")
Reported-by: Youlun Zhang <zhangyoulun@bytedance.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Co-developed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20231114004220.6495-6-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Currently veth devices use the lstats per-CPU traffic counters, which only
cover TX traffic. veth_get_stats64() actually populates RX stats of a veth
device from its peer's TX counters, based on the assumption that a veth
device can _only_ receive packets from its peer, which is no longer true:
For example, recent CNIs (like Cilium) can use the bpf_redirect_peer() BPF
helper to redirect traffic from NIC's tc ingress to veth's tc ingress (in
a different netns), skipping veth's peer device. Unfortunately, this kind
of traffic isn't currently accounted for in veth's RX stats.
In preparation for the fix, use tstats (instead of lstats) to maintain
both RX and TX counters for each veth device. We'll use RX counters for
bpf_redirect_peer() traffic, and keep using TX counters for the usual
"peer-to-peer" traffic. In veth_get_stats64(), calculate RX stats by
_adding_ RX count to peer's TX count, in order to cover both kinds of
traffic.
veth_stats_rx() might need a name change (perhaps to "veth_stats_xdp()")
for less confusion, but let's leave it to another patch to keep the fix
minimal.
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Co-developed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20231114004220.6495-5-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Add dev->tstats traffic accounting to netkit. The latter contains per-CPU
RX and TX counters.
The dev's TX counters are bumped upon pass/unspec as well as redirect
verdicts, in other words, on everything except for drops.
The dev's RX counters are bumped upon successful __netif_rx(), as well
as from skb_do_redirect() (not part of this commit here).
Using dev->lstats with having just a single packets/bytes counter and
inferring one another's RX counters from the peer dev's lstats is not
possible given skb_do_redirect() can also bump the device's stats.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20231114004220.6495-4-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Move {l,t,d}stats allocation to the core and let netdevs pick the stats
type they need. That way the driver doesn't have to bother with error
handling (allocation failure checking, making sure free happens in the
right spot, etc) - all happening in the core.
Co-developed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Cc: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20231114004220.6495-3-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Just move struct pcpu_dstats out of the vrf into the core, and streamline
the field names slightly, so they better align with the {t,l}stats ones.
No functional change otherwise. A conversion of the u64s to u64_stats_t
could be done at a separate point in future. This move is needed as we are
moving the {t,l,d}stats allocation/freeing to the core.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20231114004220.6495-2-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
When CONFIG_BLK_DEV_NULL_BLK_FAULT_INJECTION is enabled, null_queue_rq()
would return BLK_STS_RESOURCE or BLK_STS_DEV_RESOURCE for the request,
which has been marked as MQ_RQ_IN_FLIGHT by blk_mq_start_request().
Then null_queue_rqs() put these requests in the rqlist, return back to
the block layer core, which would try to queue them individually again,
so the warning in blk_mq_start_request() triggered.
Fix it by splitting the null_queue_rq() into two parts: the first is the
preparation of request, the second is the handling of request. We put
the blk_mq_start_request() after the preparation part, which may fail
and return back to the block layer core.
The throttling also belongs to the preparation part, so move it before
blk_mq_start_request(). And change the return type of null_handle_cmd()
to void, since it always return BLK_STS_OK now.
Reported-by: <syzbot+fcc47ba2476570cbbeb0@syzkaller.appspotmail.com>
Closes: https://lore.kernel.org/all/0000000000000e6aac06098aee0c@google.com/
Fixes: d78bfa1346ab ("block/null_blk: add queue_rqs() support")
Suggested-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Link: https://lore.kernel.org/r/20231120032521.1012037-1-chengming.zhou@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The TLS handshake timeout work item should always be
initialized to avoid a crash when cancelling the workqueue.
Fixes: 675b453e0241 ("nvmet-tcp: enable TLS handshake upcall")
Suggested-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The host and subsystem NQNs are passed in the connect command payload and
interpreted as nul-terminated strings. Ensure they actually are
nul-terminated before using them.
Fixes: a07b4970f464 "nvmet: add a generic NVMe target")
Reported-by: Alon Zahavi <zahavi.alon@gmail.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
If the config option NVME_HOST_AUTH is not selected we should not
accept the corresponding fabrics options. This allows userspace
to detect if NVMe authentication has been enabled for the kernel.
Cc: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Fixes: f50fff73d620 ("nvme: implement In-Band authentication")
Signed-off-by: Hannes Reinecke <hare@suse.de>
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
nvme_configure_metadata() is issuing I/O, so we might incur an I/O
error which will cause the connection to be reset.
But in that case any further probing will race with reset and
cause UAF errors.
So return a status from nvme_configure_metadata() and abort
probing if there was an I/O error.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
We only need to evaluate the 'tls' connect option if TLS is
enabled; otherwise we might be getting a link error.
Fixes: 706add13676d ("nvme: keyring: fix conditional compilation")
Reported-by: kernel test robot <yujie.liu@intel.com>
Closes: https://lore.kernel.org/r/202311140426.0eHrTXBr-lkp@intel.com/
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Some error cases were not setting an auth-failure-reason-code-explanation.
This means an AUTH_Failure2 message will be sent with an explanation value
of 0 which is a reserved value.
Signed-off-by: Mark O'Donovan <shiftee@posteo.net>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Signed-off-by: Mark O'Donovan <shiftee@posteo.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The function blk_set_runtime_active() is called only from
blk_post_runtime_resume(), so there is no need for that function to be
exported. Open-code this function directly in blk_post_runtime_resume()
and remove it.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20231120070611.33951-1-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Memory reordering may occur in nbd_genl_connect(), causing config_refs
to be set to 1 while nbd->config is still empty. Opening nbd at this
time will cause null-ptr-dereference.
T1 T2
nbd_open
nbd_get_config_unlocked
nbd_genl_connect
nbd_alloc_and_init_config
//memory reordered
refcount_set(&nbd->config_refs, 1) // 2
nbd->config
->null point
nbd->config = config // 1
Fix it by adding smp barrier to guarantee the execution sequence.
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20231116162316.1740402-4-linan666@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There are no functional changes, just to make code cleaner and prepare
to fix null-ptr-dereference while accessing 'nbd->config'.
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20231116162316.1740402-3-linan666@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There are no functional changes, make the code cleaner and prepare to
fix null-ptr-dereference while accessing 'nbd->config'.
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20231116162316.1740402-2-linan666@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The sleepgraph tool currently fails:
File "/usr/bin/sleepgraph", line 4155
or re.match('psci: CPU(?P<cpu>[0-9]*) killed.*', msg)):
^
SyntaxError: unmatched ')'
Fixes: 34ea427e01ea ("PM: tools: sleepgraph: Recognize "CPU killed" messages")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/song/md into block-6.7
Pull MD fix from Song.
* tag 'md-fixes-20231120' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
md: fix bi_status reporting in md_end_clone_io
|
|
Like various other ASUS ExpertBook-s, the ASUS ExpertBook B1402CVA
has an ACPI DSDT table that describes IRQ 1 as ActiveLow while
the kernel overrides it to EdgeHigh.
This prevents the keyboard from working. To fix this issue, add this laptop
to the skip_override_table so that the kernel does not override IRQ 1.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218114
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
