diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2022-12-13 13:03:06 -0800 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2022-12-13 13:03:06 -0800 |
| commit | 361c89a0da59c04b1d3d33568965fe426b0f18de (patch) | |
| tree | d72c31f11bcd2a5fe743420ab486c24b78c7459d | |
| parent | d0f3ad23cf4f4046e88eef92c608d43cad9e4f7e (diff) | |
| parent | 83e1bcaf8cef26edaaf2a6098ef760f563683483 (diff) | |
| download | linux-361c89a0da59c04b1d3d33568965fe426b0f18de.tar.gz | |
Merge tag 'pinctrl-v6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"The two large chunks is the header clean-up from Andy and the Qualcomm
DT bindings clean-up from Krzysztof. Each which could give rise to
conflicts, but I haven't seen any.
The YAML conversions happening around the device tree is the biggest
item in the series and is the result of Rob Herrings ambition to
autovalidate these trees against strict schemas and it is paying off
in lots of bugs found and ever prettier device trees. Sooner or later
the transition will be complete, Krzysztof is fixing up all of the
Qualcomm stuff, which is pretty voluminous.
Core changes:
- minor but nice and important documentation clean-ups
New drivers:
- subdriver for the Qualcomm SDM670 SoC
- subdriver for the Intel Moorefield SoC
- trivial support for the NXP Freescale i.MXRT1170 SoC
Other changes and improvements
- major clean-up of the Qualcomm pin control device tree bindings by
Krzysztof
- major header clean-up by Andy
- some immutable irqchip clean-up for the Actions Semiconductor and
Nuvoton drivers
- GPIO helpers for The Cypress cy8c95x0 driver
- bias handling in the Mediatek MT7986 driver
- remove the unused pins-are-numbered concept that never flew"
* tag 'pinctrl-v6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (231 commits)
pinctrl: thunderbay: fix possible memory leak in thunderbay_build_functions()
dt-bindings: pinctrl: st,stm32: Deprecate pins-are-numbered
dt-bindings: pinctrl: mediatek,mt65xx: Deprecate pins-are-numbered
pinctrl: stm32: Remove check for pins-are-numbered
pinctrl: mediatek: common: Remove check for pins-are-numbered
pinctrl: qcom: remove duplicate included header files
pinctrl: sunxi: d1: Add CAN bus pinmuxes
pinctrl: loongson2: Fix some const correctness
pinctrl: pinconf-generic: add missing of_node_put()
pinctrl: intel: Enumerate PWM device when community has a capability
pwm: lpss: Rename pwm_lpss_probe() --> devm_pwm_lpss_probe()
pwm: lpss: Allow other drivers to enable PWM LPSS
pwm: lpss: Include headers we are the direct user of
pwm: lpss: Rename MAX_PWMS --> LPSS_MAX_PWMS
pwm: Add a stub for devm_pwmchip_add()
pinctrl: k210: call of_node_put()
pinctrl: starfive: Use existing variable gpio
dt-bindings: pinctrl: semtech,sx150xq: fix match patterns for 16 GPIOs matching
pinconf-generic: fix style issues in pin_config_param doc
pinctrl: pinctrl-loongson2: fix Kconfig dependency
...
201 files changed, 7899 insertions, 4770 deletions
diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index 0a5c4e29067abe..05b5276a0e14cf 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -1070,6 +1070,18 @@ properties: - fsl,imx93-11x11-evk # i.MX93 11x11 EVK Board - const: fsl,imx93 + - description: i.MXRT1050 based Boards + items: + - enum: + - fsl,imxrt1050-evk # i.MXRT1050 EVK Board + - const: fsl,imxrt1050 + + - description: i.MXRT1170 based Boards + items: + - enum: + - fsl,imxrt1170-evk # i.MXRT1170 EVK Board + - const: fsl,imxrt1170 + - description: Freescale Vybrid Platform Device Tree Bindings diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml index 29339d0196ecb5..0e7833478869c3 100644 --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml @@ -75,6 +75,10 @@ properties: - const: fsl,imx8qxp-usdhc - const: fsl,imx7d-usdhc deprecated: true + - items: + - enum: + - fsl,imxrt1170-usdhc + - const: fsl,imxrt1050-usdhc reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imxrt1050.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imxrt1050.yaml index 1278f729356040..db5fe66ad8733d 100644 --- a/Documentation/devicetree/bindings/pinctrl/fsl,imxrt1050.yaml +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imxrt1050.yaml @@ -35,7 +35,7 @@ patternProperties: each entry consists of 6 integers and represents the mux and config setting for one pin. The first 5 integers <mux_reg conf_reg input_reg mux_val input_val> are specified using a PIN_FUNC_ID macro, which can - be found in <include/dt-bindings/pinctrl/pins-imxrt1050.h>. The last + be found in <arch/arm/boot/dts/imxrt1050-pinfunc.h>. The last integer CONFIG is the pad setting value like pull-up on this pin. Please refer to i.MXRT1050 Reference Manual for detailed CONFIG settings. $ref: /schemas/types.yaml#/definitions/uint32-matrix diff --git a/Documentation/devicetree/bindings/pinctrl/loongson,ls2k-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/loongson,ls2k-pinctrl.yaml new file mode 100644 index 00000000000000..bd8a458435666b --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/loongson,ls2k-pinctrl.yaml @@ -0,0 +1,123 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/loongson,ls2k-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Loongson-2 SoC Pinctrl Controller + +maintainers: + - zhanghongchen <zhanghongchen@loongson.cn> + - Yinbo Zhu <zhuyinbo@loongson.cn> + +allOf: + - $ref: pinctrl.yaml# + +properties: + compatible: + const: loongson,ls2k-pinctrl + + reg: + maxItems: 1 + +patternProperties: + '-pins$': + type: object + + additionalProperties: false + + patternProperties: + 'pinmux$': + type: object + description: node for pinctrl. + $ref: pinmux-node.yaml# + + unevaluatedProperties: false + + properties: + groups: + description: + One or more groups of pins to mux to a certain function + items: + enum: [gpio, sdio, can1, can0, pwm3, pwm2, pwm1, pwm0, i2c1, i2c0, + nand, sata_led, i2s, hda] + function: + description: + The function that a group of pins is muxed to + enum: [gpio, sdio, can1, can0, pwm3, pwm2, pwm1, pwm0, i2c1, i2c0, + nand, sata_led, i2s, hda] + + required: + - groups + - function + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + pctrl: pinctrl@1fe00420 { + compatible = "loongson,ls2k-pinctrl"; + reg = <0x1fe00420 0x18>; + sdio_pins_default: sdio-pins { + sdio-pinmux { + groups = "sdio"; + function = "sdio"; + }; + + sdio-det-pinmux { + groups = "pwm2"; + function = "gpio"; + }; + }; + + pwm1_pins_default: pwm1-pins { + pinmux { + groups = "pwm1"; + function = "pwm1"; + }; + }; + + pwm0_pins_default: pwm0-pins { + pinmux { + groups = "pwm0"; + function = "pwm0"; + }; + }; + + i2c1_pins_default: i2c1-pins { + pinmux { + groups = "i2c1"; + function = "i2c1"; + }; + }; + + i2c0_pins_default: i2c0-pins { + pinmux { + groups = "i2c0"; + function = "i2c0"; + }; + }; + + nand_pins_default: nand-pins { + pinmux { + groups = "nand"; + function = "nand"; + }; + }; + + hda_pins_default: hda-pins { + grp0-pinmux { + groups = "hda"; + function = "hda"; + }; + + grp1-pinmux { + groups = "i2s"; + function = "gpio"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml index 33b5f79e741ab6..1b44335b1e9474 100644 --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml @@ -31,7 +31,8 @@ properties: pins-are-numbered: $ref: /schemas/types.yaml#/definitions/flag description: | - Specify the subnodes are using numbered pinmux to specify pins. + Specify the subnodes are using numbered pinmux to specify pins. (UNUSED) + deprecated: true gpio-controller: true @@ -62,7 +63,6 @@ properties: required: - compatible - - pins-are-numbered - gpio-controller - "#gpio-cells" @@ -150,7 +150,6 @@ examples: compatible = "mediatek,mt8135-pinctrl"; reg = <0 0x1000B000 0 0x1000>; mediatek,pctl-regmap = <&syscfg_pctl_a>, <&syscfg_pctl_b>; - pins-are-numbered; gpio-controller; #gpio-cells = <2>; interrupt-controller; diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml index 8c79fcef7c5215..a2141eb0854e67 100644 --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml @@ -8,31 +8,22 @@ title: Mediatek MT6779 Pin Controller maintainers: - Andy Teng <andy.teng@mediatek.com> + - Sean Wang <sean.wang@kernel.org> -description: |+ - The pin controller node should be the child of a syscon node with the - required property: - - compatible: "syscon" +description: + The MediaTek pin controller on MT6779 is used to control pin + functions, pull up/down resistance and drive strength options. properties: compatible: - const: mediatek,mt6779-pinctrl + enum: + - mediatek,mt6779-pinctrl + - mediatek,mt6797-pinctrl reg: - minItems: 9 - maxItems: 9 - - reg-names: - items: - - const: "gpio" - - const: "iocfg_rm" - - const: "iocfg_br" - - const: "iocfg_lm" - - const: "iocfg_lb" - - const: "iocfg_rt" - - const: "iocfg_lt" - - const: "iocfg_tl" - - const: "eint" + description: Physical addresses for GPIO base(s) and EINT registers. + + reg-names: true gpio-controller: true @@ -59,19 +50,65 @@ properties: "#interrupt-cells": const: 2 -allOf: - - $ref: "pinctrl.yaml#" - required: - compatible - reg - reg-names - gpio-controller - "#gpio-cells" - - gpio-ranges - - interrupt-controller - - interrupts - - "#interrupt-cells" + +allOf: + - $ref: "pinctrl.yaml#" + - if: + properties: + compatible: + contains: + const: mediatek,mt6779-pinctrl + then: + properties: + reg: + minItems: 9 + maxItems: 9 + + reg-names: + items: + - const: gpio + - const: iocfg_rm + - const: iocfg_br + - const: iocfg_lm + - const: iocfg_lb + - const: iocfg_rt + - const: iocfg_lt + - const: iocfg_tl + - const: eint + - if: + properties: + compatible: + contains: + const: mediatek,mt6797-pinctrl + then: + properties: + reg: + minItems: 5 + maxItems: 5 + + reg-names: + items: + - const: gpio + - const: iocfgl + - const: iocfgb + - const: iocfgr + - const: iocfgt + - if: + properties: + reg-names: + contains: + const: eint + then: + required: + - interrupts + - interrupt-controller + - "#interrupt-cells" patternProperties: '-[0-9]*$': @@ -113,6 +150,12 @@ patternProperties: input-schmitt-disable: true + drive-strength: + enum: [2, 4, 8, 12, 16] + + slew-rate: + enum: [0, 1] + mediatek,pull-up-adv: description: | Pull up setings for 2 pull resistors, R0 and R1. User can diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6797-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6797-pinctrl.yaml deleted file mode 100644 index 637a8386e23ebd..00000000000000 --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6797-pinctrl.yaml +++ /dev/null @@ -1,176 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/pinctrl/mediatek,mt6797-pinctrl.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Mediatek MT6797 Pin Controller - -maintainers: - - Sean Wang <sean.wang@kernel.org> - -description: |+ - The MediaTek's MT6797 Pin controller is used to control SoC pins. - -properties: - compatible: - const: mediatek,mt6797-pinctrl - - reg: - minItems: 5 - maxItems: 5 - - reg-names: - items: - - const: gpio - - const: iocfgl - - const: iocfgb - - const: iocfgr - - const: iocfgt - - gpio-controller: true - - "#gpio-cells": - const: 2 - description: | - Number of cells in GPIO specifier. Since the generic GPIO - binding is used, the amount of cells must be specified as 2. See the below - mentioned gpio binding representation for description of particular cells. - - interrupt-controller: true - - interrupts: - maxItems: 1 - - "#interrupt-cells": - const: 2 - -allOf: - - $ref: "pinctrl.yaml#" - -required: - - compatible - - reg - - reg-names - - gpio-controller - - "#gpio-cells" - -patternProperties: - '-[0-9]+$': - type: object - additionalProperties: false - patternProperties: - 'pins': - type: object - additionalProperties: false - description: | - A pinctrl node should contain at least one subnodes representing the - pinctrl groups available on the machine. Each subnode will list the - pins it needs, and how they should be configured, with regard to muxer - configuration, pullups, drive strength, input enable/disable and input - schmitt. - $ref: "/schemas/pinctrl/pincfg-node.yaml" - - properties: - pinmux: - description: - integer array, represents gpio pin number and mux setting. - Supported pin number and mux varies for different SoCs, and are - defined as macros in <soc>-pinfunc.h directly. - - bias-disable: true - - bias-pull-up: true - - bias-pull-down: true - - input-enable: true - - input-disable: true - - output-enable: true - - output-low: true - - output-high: true - - input-schmitt-enable: true - - input-schmitt-disable: true - - drive-strength: - enum: [2, 4, 8, 12, 16] - - slew-rate: - enum: [0, 1] - - mediatek,pull-up-adv: - description: | - Pull up setings for 2 pull resistors, R0 and R1. User can - configure those special pins. Valid arguments are described as below: - 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. - 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. - 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled. - 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled. - $ref: /schemas/types.yaml#/definitions/uint32 - enum: [0, 1, 2, 3] - - mediatek,pull-down-adv: - description: | - Pull down settings for 2 pull resistors, R0 and R1. User can - configure those special pins. Valid arguments are described as below: - 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. - 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. - 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled. - 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled. - $ref: /schemas/types.yaml#/definitions/uint32 - enum: [0, 1, 2, 3] - - mediatek,tdsel: - description: | - An integer describing the steps for output level shifter duty - cycle when asserted (high pulse width adjustment). Valid arguments - are from 0 to 15. - $ref: /schemas/types.yaml#/definitions/uint32 - - mediatek,rdsel: - description: | - An integer describing the steps for input level shifter duty cycle - when asserted (high pulse width adjustment). Valid arguments are - from 0 to 63. - $ref: /schemas/types.yaml#/definitions/uint32 - - required: - - pinmux - -additionalProperties: false - -examples: - - | - #include <dt-bindings/interrupt-controller/irq.h> - #include <dt-bindings/interrupt-controller/arm-gic.h> - #include <dt-bindings/pinctrl/mt6797-pinfunc.h> - - soc { - #address-cells = <2>; - #size-cells = <2>; - - pio: pinctrl@10005000 { - compatible = "mediatek,mt6797-pinctrl"; - reg = <0 0x10005000 0 0x1000>, - <0 0x10002000 0 0x400>, - <0 0x10002400 0 0x400>, - <0 0x10002800 0 0x400>, - <0 0x10002C00 0 0x400>; - reg-names = "gpio", "iocfgl", "iocfgb", "iocfgr", "iocfgt"; - gpio-controller; - #gpio-cells = <2>; - - uart_pins_a: uart-0 { - pins1 { - pinmux = <MT6797_GPIO232__FUNC_URXD1>, - <MT6797_GPIO233__FUNC_UTXD1>; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml index 89b8f3dd67a19b..216b356cd51926 100644 --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml @@ -87,6 +87,8 @@ patternProperties: "wifi_led" "led" 1, 2 "i2c" "i2c" 3, 4 "uart1_0" "uart" 7, 8, 9, 10 + "uart1_rx_tx" "uart" 42, 43 + "uart1_cts_rts" "uart" 44, 45 "pcie_clk" "pcie" 9 "pcie_wake" "pcie" 10 "spi1_0" "spi" 11, 12, 13, 14 @@ -98,9 +100,11 @@ patternProperties: "emmc_45" "emmc" 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32 "spi1_1" "spi" 23, 24, 25, 26 - "uart1_2" "uart" 29, 30, 31, 32 + "uart1_2_rx_tx" "uart" 29, 30 + "uart1_2_cts_rts" "uart" 31, 32 "uart1_1" "uart" 23, 24, 25, 26 - "uart2_0" "uart" 29, 30, 31, 32 + "uart2_0_rx_tx" "uart" 29, 30 + "uart2_0_cts_rts" "uart" 31, 32 "spi0" "spi" 33, 34, 35, 36 "spi0_wp_hold" "spi" 37, 38 "uart1_3_rx_tx" "uart" 35, 36 @@ -157,7 +161,7 @@ patternProperties: then: properties: groups: - enum: [emmc, emmc_rst] + enum: [emmc_45, emmc_51] - if: properties: function: @@ -197,7 +201,9 @@ patternProperties: then: properties: groups: - enum: [pcie_clk, pcie_wake, pcie_pereset] + items: + enum: [pcie_clk, pcie_wake, pcie_pereset] + maxItems: 3 - if: properties: function: @@ -205,7 +211,9 @@ patternProperties: then: properties: groups: - enum: [pwm0, pwm1_0, pwm1_1] + items: + enum: [pwm0, pwm1_0, pwm1_1] + maxItems: 2 - if: properties: function: @@ -213,7 +221,9 @@ patternProperties: then: properties: groups: - enum: [spi0, spi0_wp_hold, spi1_0, spi1_1, spi1_2, spi1_3] + items: + enum: [spi0, spi0_wp_hold, spi1_0, spi1_1, spi1_2, spi1_3] + maxItems: 2 - if: properties: function: @@ -221,8 +231,12 @@ patternProperties: then: properties: groups: - enum: [uart1_0, uart1_1, uart1_2, uart1_3_rx_tx, - uart1_3_cts_rts, uart2_0, uart2_1, uart0, uart1, uart2] + items: + enum: [uart1_0, uart1_rx_tx, uart1_cts_rts, uart1_1, + uart1_2_rx_tx, uart1_2_cts_rts, uart1_3_rx_tx, + uart1_3_cts_rts, uart2_0_rx_tx, uart2_0_cts_rts, + uart2_1, uart0, uart1, uart2] + maxItems: 2 - if: properties: function: @@ -278,9 +292,23 @@ patternProperties: bias-disable: true - bias-pull-up: true - - bias-pull-down: true + bias-pull-up: + oneOf: + - type: boolean + description: normal pull up. + - enum: [100, 101, 102, 103] + description: | + PUPD/R1/R0 pull down type. See MTK_PUPD_SET_R1R0 defines in + dt-bindings/pinctrl/mt65xx.h. + + bias-pull-down: + oneOf: + - type: boolean + description: normal pull down. + - enum: [100, 101, 102, 103] + description: | + PUPD/R1/R0 pull down type. See MTK_PUPD_SET_R1R0 defines in + dt-bindings/pinctrl/mt65xx.h. input-enable: true @@ -332,6 +360,7 @@ examples: - | #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/pinctrl/mt65xx.h> soc { #address-cells = <2>; @@ -356,6 +385,27 @@ examples: interrupt-parent = <&gic>; #interrupt-cells = <2>; + pcie_pins: pcie-pins { + mux { + function = "pcie"; + groups = "pcie_clk", "pcie_wake", "pcie_pereset"; + }; + }; + + pwm_pins: pwm-pins { + mux { + function = "pwm"; + groups = "pwm0", "pwm1_0"; + }; + }; + + spi0_pins: spi0-pins { + mux { + function = "spi"; + groups = "spi0", "spi0_wp_hold"; + }; + }; + uart1_pins: uart1-pins { mux { function = "uart"; @@ -363,6 +413,13 @@ examples: }; }; + uart1_3_pins: uart1-3-pins { + mux { + function = "uart"; + groups = "uart1_3_rx_tx", "uart1_3_cts_rts"; + }; + }; + uart2_pins: uart2-pins { mux { function = "uart"; @@ -370,5 +427,34 @@ examples: }; }; + mmc0_pins_default: mmc0-pins { + mux { + function = "emmc"; + groups = "emmc_51"; + }; + conf-cmd-dat { + pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2", + "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5", + "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD"; + input-enable; + drive-strength = <4>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */ + }; + conf-clk { + pins = "EMMC_CK"; + drive-strength = <6>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */ + }; + conf-ds { + pins = "EMMC_DSL"; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */ + }; + conf-rst { + pins = "EMMC_RSTB"; + drive-strength = <4>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */ + }; + }; + }; }; diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,pinctrl-mt6795.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,pinctrl-mt6795.yaml index 73ae6e11410b3d..9399e02155268c 100644 --- a/Documentation/devicetree/bindings/pinctrl/mediatek,pinctrl-mt6795.yaml +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,pinctrl-mt6795.yaml @@ -46,8 +46,11 @@ properties: const: 2 interrupts: - description: The interrupt outputs to sysirq. - maxItems: 1 + description: Interrupt outputs to the system interrupt controller (sysirq). + minItems: 1 + items: + - description: EINT interrupt + - description: EINT event_b interrupt # PIN CONFIGURATION NODES patternProperties: diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-sx150x.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-sx150x.txt deleted file mode 100644 index 4023bad2fe39ac..00000000000000 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-sx150x.txt +++ /dev/null @@ -1,72 +0,0 @@ -SEMTECH SX150x GPIO expander bindings - -Please refer to pinctrl-bindings.txt, ../gpio/gpio.txt, and -../interrupt-controller/interrupts.txt for generic information regarding -pin controller, GPIO, and interrupt bindings. - -Required properties: -- compatible: should be one of : - "semtech,sx1501q", - "semtech,sx1502q", - "semtech,sx1503q", - "semtech,sx1504q", - "semtech,sx1505q", - "semtech,sx1506q", - "semtech,sx1507q", - "semtech,sx1508q", - "semtech,sx1509q". - -- reg: The I2C slave address for this device. - -- #gpio-cells: Should be 2. The first cell is the GPIO number and the - second cell is used to specify optional parameters: - bit 0: polarity (0: normal, 1: inverted) - -- gpio-controller: Marks the device as a GPIO controller. - -Optional properties : -- interrupts: Interrupt specifier for the controllers interrupt. - -- interrupt-controller: Marks the device as a interrupt controller. - -- semtech,probe-reset: Will trigger a reset of the GPIO expander on probe, - only for sx1507q, sx1508q and sx1509q - -The GPIO expander can optionally be used as an interrupt controller, in -which case it uses the default two cell specifier. - -Required properties for pin configuration sub-nodes: - - pins: List of pins to which the configuration applies. - -Optional properties for pin configuration sub-nodes: ----------------------------------------------------- - - bias-disable: disable any pin bias, except the OSCIO pin - - bias-pull-up: pull up the pin, except the OSCIO pin - - bias-pull-down: pull down the pin, except the OSCIO pin - - bias-pull-pin-default: use pin-default pull state, except the OSCIO pin - - drive-push-pull: drive actively high and low - - drive-open-drain: drive with open drain only for sx1507q, sx1508q and sx1509q and except the OSCIO pin - - output-low: set the pin to output mode with low level - - output-high: set the pin to output mode with high level - -Example: - - i2c0gpio-expander@20{ - #gpio-cells = <2>; - #interrupt-cells = <2>; - compatible = "semtech,sx1506q"; - reg = <0x20>; - interrupt-parent = <&gpio_1>; - interrupts = <16 0>; - - gpio-controller; - interrupt-controller; - - pinctrl-names = "default"; - pinctrl-0 = <&gpio1_cfg_pins>; - - gpio1_cfg_pins: gpio1-cfg { - pins = "gpio1"; - bias-pull-up; - }; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml index 931e5c190ead94..93f231c7a3b43e 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml @@ -7,11 +7,10 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Technologies, Inc. IPQ6018 TLMM block maintainers: - - Sricharan R <sricharan@codeaurora.org> + - Bjorn Andersson <andersson@kernel.org> -description: | - This binding describes the Top Level Mode Multiplexer block found in the - IPQ6018 platform. +description: + Top Level Mode Multiplexer pin controller in Qualcomm IPQ6018 SoC. properties: compatible: @@ -20,36 +19,28 @@ properties: reg: maxItems: 1 - interrupts: - description: Specifies the TLMM summary IRQ - maxItems: 1 - + interrupts: true interrupt-controller: true - - '#interrupt-cells': - description: - Specifies the PIN numbers and Flags, as defined in defined in - include/dt-bindings/interrupt-controller/irq.h - const: 2 - + "#interrupt-cells": true gpio-controller: true + "#gpio-cells": true + gpio-ranges: true - '#gpio-cells': - description: Specifying the pin number and flags, as defined in - include/dt-bindings/gpio/gpio.h - const: 2 - - gpio-ranges: - maxItems: 1 - -#PIN CONFIGURATION NODES patternProperties: - '-pinmux$': - type: object + "-state$": + oneOf: + - $ref: "#/$defs/qcom-ipq6018-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-ipq6018-tlmm-state" + additionalProperties: false + +$defs: + qcom-ipq6018-tlmm-state: description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. - $ref: "/schemas/pinctrl/pincfg-node.yaml" + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state properties: pins: @@ -63,7 +54,7 @@ patternProperties: sdc2_data, qdsd_cmd, qdsd_data0, qdsd_data1, qdsd_data2, qdsd_data3 ] minItems: 1 - maxItems: 4 + maxItems: 16 function: description: @@ -72,12 +63,12 @@ patternProperties: enum: [ adsp_ext, alsp_int, atest_bbrx0, atest_bbrx1, atest_char, atest_char0, atest_char1, atest_char2, atest_char3, atest_combodac, atest_gpsadc0, atest_gpsadc1, atest_tsens, atest_wlan0, - atest_wlan1, backlight_en, bimc_dte0, bimc_dte1, blsp1_i2c, - blsp2_i2c, blsp3_i2c, blsp4_i2c, blsp5_i2c, blsp6_i2c, blsp1_spi, + atest_wlan1, backlight_en, bimc_dte0, bimc_dte1, blsp0_i2c, blsp1_i2c, + blsp2_i2c, blsp3_i2c, blsp4_i2c, blsp5_i2c, blsp0_spi, blsp1_spi, blsp1_spi_cs1, blsp1_spi_cs2, blsp1_spi_cs3, blsp2_spi, blsp2_spi_cs1, blsp2_spi_cs2, blsp2_spi_cs3, blsp3_spi, blsp3_spi_cs1, blsp3_spi_cs2, blsp3_spi_cs3, blsp4_spi, blsp5_spi, - blsp6_spi, blsp1_uart, blsp2_uart, blsp1_uim, blsp2_uim, cam1_rst, + blsp0_uart, blsp1_uart, blsp2_uart, blsp1_uim, blsp2_uim, cam1_rst, cam1_standby, cam_mclk0, cam_mclk1, cci_async, cci_i2c, cci_timer0, cci_timer1, cci_timer2, cdc_pdm0, codec_mad, dbg_out, display_5v, dmic0_clk, dmic0_data, dsi_rst, ebi0_wrcdc, euro_us, ext_lpass, @@ -92,64 +83,48 @@ patternProperties: qdss_ctitrig_in_b0, qdss_ctitrig_in_b1, qdss_ctitrig_out_a0, qdss_ctitrig_out_a1, qdss_ctitrig_out_b0, qdss_ctitrig_out_b1, qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b, - qdss_tracedata_a, qdss_tracedata_b, reset_n, sd_card, sd_write, - sec_mi2s, smb_int, ssbi_wtr0, ssbi_wtr1, uim1, uim2, uim3, - uim_batt, wcss_bt, wcss_fm, wcss_wlan, webcam1_rst ] - - drive-strength: - enum: [2, 4, 6, 8, 10, 12, 14, 16] - default: 2 - description: - Selects the drive strength for the specified pins, in mA. + qdss_tracedata_a, qdss_tracedata_b, qpic_pad, reset_n, sd_card, + sd_write, sec_mi2s, smb_int, ssbi_wtr0, ssbi_wtr1, uim1, uim2, + uim3, uim_batt, wcss_bt, wcss_fm, wcss_wlan, webcam1_rst ] bias-pull-down: true - bias-pull-up: true - bias-disable: true - + drive-strength: true output-high: true - output-low: true required: - pins - - function additionalProperties: false allOf: - - $ref: "pinctrl.yaml#" + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# required: - compatible - reg - - interrupts - - interrupt-controller - - '#interrupt-cells' - - gpio-controller - - '#gpio-cells' - - gpio-ranges additionalProperties: false examples: - | - #include <dt-bindings/interrupt-controller/arm-gic.h> - tlmm: pinctrl@1000000 { - compatible = "qcom,ipq6018-pinctrl"; - reg = <0x01000000 0x300000>; - interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&tlmm 0 0 80>; - - serial3-pinmux { - pins = "gpio44", "gpio45"; - function = "blsp2_uart"; - drive-strength = <8>; - bias-pull-down; - }; + #include <dt-bindings/interrupt-controller/arm-gic.h> + tlmm: pinctrl@1000000 { + compatible = "qcom,ipq6018-pinctrl"; + reg = <0x01000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 80>; + + serial3-state { + pins = "gpio44", "gpio45"; + function = "blsp2_uart"; + drive-strength = <8>; + bias-pull-down; }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.txt deleted file mode 100644 index 7b151894f5a0df..00000000000000 --- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.txt +++ /dev/null @@ -1,181 +0,0 @@ -Qualcomm Technologies, Inc. IPQ8074 TLMM block - -This binding describes the Top Level Mode Multiplexer block found in the -IPQ8074 platform. - -- compatible: - Usage: required - Value type: <string> - Definition: must be "qcom,ipq8074-pinctrl" - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: the base address and size of the TLMM register space. - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: should specify the TLMM summary IRQ. - -- interrupt-controller: - Usage: required - Value type: <none> - Definition: identifies this node as an interrupt controller - -- #interrupt-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/interrupt-controller/irq.h> - -- gpio-controller: - Usage: required - Value type: <none> - Definition: identifies this node as a gpio controller - -- #gpio-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/gpio/gpio.h> - -- gpio-ranges: - Usage: required - Definition: see ../gpio/gpio.txt - -- gpio-reserved-ranges: - Usage: optional - Definition: see ../gpio/gpio.txt - -Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for -a general description of GPIO and interrupt bindings. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -The pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those pin(s)/group(s), and various pin configuration -parameters, such as pull-up, drive strength, etc. - - -PIN CONFIGURATION NODES: - -The name of each subnode is not important; all subnodes should be enumerated -and processed purely based on their content. - -Each subnode only affects those parameters that are explicitly listed. In -other words, a subnode that lists a mux function but no pin configuration -parameters implies no information about any pin configuration parameters. -Similarly, a pin subnode that describes a pullup parameter implies no -information about e.g. the mux function. - - -The following generic properties as defined in pinctrl-bindings.txt are valid -to specify in a pin configuration subnode: - -- pins: - Usage: required - Value type: <string-array> - Definition: List of gpio pins affected by the properties specified in - this subnode. Valid pins are: - gpio0-gpio69 - -- function: - Usage: required - Value type: <string> - Definition: Specify the alternative function to be configured for the - specified pins. Functions are only valid for gpio pins. - Valid values are: - atest_char, atest_char0, atest_char1, atest_char2, - atest_char3, audio_rxbclk, audio_rxd, audio_rxfsync, - audio_rxmclk, audio_txbclk, audio_txd, audio_txfsync, - audio_txmclk, blsp0_i2c, blsp0_spi, blsp0_uart, blsp1_i2c, - blsp1_spi, blsp1_uart, blsp2_i2c, blsp2_spi, blsp2_uart, - blsp3_i2c, blsp3_spi, blsp3_spi0, blsp3_spi1, blsp3_spi2, - blsp3_spi3, blsp3_uart, blsp4_i2c0, blsp4_i2c1, blsp4_spi0, - blsp4_spi1, blsp4_uart0, blsp4_uart1, blsp5_i2c, blsp5_spi, - blsp5_uart, burn0, burn1, cri_trng, cri_trng0, cri_trng1, - cxc0, cxc1, dbg_out, gcc_plltest, gcc_tlmm, gpio, ldo_en, - ldo_update, led0, led1, led2, mac0_sa0, mac0_sa1, mac1_sa0, - mac1_sa1, mac1_sa2, mac1_sa3, mac2_sa0, mac2_sa1, mdc, - mdio, pcie0_clk, pcie0_rst, pcie0_wake, pcie1_clk, - pcie1_rst, pcie1_wake, pcm_drx, pcm_dtx, pcm_fsync, - pcm_pclk, pcm_zsi0, pcm_zsi1, prng_rosc, pta1_0, pta1_1, - pta1_2, pta2_0, pta2_1, pta2_2, pwm0, pwm1, pwm2, pwm3, - qdss_cti_trig_in_a0, qdss_cti_trig_in_a1, - qdss_cti_trig_in_b0, qdss_cti_trig_in_b1, - qdss_cti_trig_out_a0, qdss_cti_trig_out_a1, - qdss_cti_trig_out_b0, qdss_cti_trig_out_b1, - qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a, - qdss_tracectl_b, qdss_tracedata_a, qdss_tracedata_b, - qpic, rx0, rx1, rx2, sd_card, sd_write, tsens_max, wci2a, - wci2b, wci2c, wci2d - -- bias-disable: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as no pull. - -- bias-pull-down: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull down. - -- bias-pull-up: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull up. - -- output-high: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - high. - -- output-low: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - low. - -- drive-strength: - Usage: optional - Value type: <u32> - Definition: Selects the drive strength for the specified pins, in mA. - Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 - -Example: - - tlmm: pinctrl@1000000 { - compatible = "qcom,ipq8074-pinctrl"; - reg = <0x1000000 0x300000>; - interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&tlmm 0 0 70>; - interrupt-controller; - #interrupt-cells = <2>; - - uart2: uart2-default { - mux { - pins = "gpio23", "gpio24"; - function = "blsp4_uart1"; - }; - - rx { - pins = "gpio23"; - drive-strength = <4>; - bias-disable; - }; - - tx { - pins = "gpio24"; - drive-strength = <2>; - bias-pull-up; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.yaml new file mode 100644 index 00000000000000..5687acaf19bfa7 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.yaml @@ -0,0 +1,135 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,ipq8074-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm IPQ8074 TLMM pin controller + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm IPQ8074 SoC. + +properties: + compatible: + const: qcom,ipq8074-pinctrl + + reg: + maxItems: 1 + + interrupts: true + interrupt-controller: true + "#interrupt-cells": true + gpio-controller: true + "#gpio-cells": true + gpio-ranges: true + wakeup-parent: true + + gpio-reserved-ranges: + minItems: 1 + maxItems: 35 + + gpio-line-names: + maxItems: 70 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-ipq8074-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-ipq8074-tlmm-state" + additionalProperties: false + +$defs: + qcom-ipq8074-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + pattern: "^gpio([0-9]|[1-6][0-9]|70)$" + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ gpio, atest_char, atest_char0, atest_char1, atest_char2, + atest_char3, audio_rxbclk, audio_rxd, audio_rxfsync, + audio_rxmclk, audio_txbclk, audio_txd, audio_txfsync, + audio_txmclk, blsp0_i2c, blsp0_spi, blsp0_uart, blsp1_i2c, + blsp1_spi, blsp1_uart, blsp2_i2c, blsp2_spi, blsp2_uart, + blsp3_i2c, blsp3_spi, blsp3_spi0, blsp3_spi1, blsp3_spi2, + blsp3_spi3, blsp3_uart, blsp4_i2c0, blsp4_i2c1, blsp4_spi0, + blsp4_spi1, blsp4_uart0, blsp4_uart1, blsp5_i2c, blsp5_spi, + blsp5_uart, burn0, burn1, cri_trng, cri_trng0, cri_trng1, cxc0, + cxc1, dbg_out, gcc_plltest, gcc_tlmm, ldo_en, ldo_update, led0, + led1, led2, mac0_sa0, mac0_sa1, mac1_sa0, mac1_sa1, mac1_sa2, + mac1_sa3, mac2_sa0, mac2_sa1, mdc, mdio, pcie0_clk, pcie0_rst, + pcie0_wake, pcie1_clk, pcie1_rst, pcie1_wake, pcm_drx, pcm_dtx, + pcm_fsync, pcm_pclk, pcm_zsi0, pcm_zsi1, prng_rosc, pta1_0, + pta1_1, pta1_2, pta2_0, pta2_1, pta2_2, pwm0, pwm1, pwm2, pwm3, + qdss_cti_trig_in_a0, qdss_cti_trig_in_a1, qdss_cti_trig_in_b0, + qdss_cti_trig_in_b1, qdss_cti_trig_out_a0, + qdss_cti_trig_out_a1, qdss_cti_trig_out_b0, + qdss_cti_trig_out_b1, qdss_traceclk_a, qdss_traceclk_b, + qdss_tracectl_a, qdss_tracectl_b, qdss_tracedata_a, + qdss_tracedata_b, qpic, rx0, rx1, rx2, sd_card, sd_write, + tsens_max, wci2a, wci2b, wci2c, wci2d ] + + bias-pull-down: true + bias-pull-up: true + bias-disable: true + drive-strength: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + + additionalProperties: false + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + tlmm: pinctrl@1000000 { + compatible = "qcom,ipq8074-pinctrl"; + reg = <0x01000000 0x300000>; + gpio-controller; + #gpio-cells = <0x2>; + gpio-ranges = <&tlmm 0 0 70>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <0x2>; + + serial4-state { + pins = "gpio23", "gpio24"; + function = "blsp4_uart1"; + drive-strength = <8>; + bias-disable; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,mdm9607-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,mdm9607-tlmm.yaml index f7bd4be1739e5d..a0a12171b6d0d9 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,mdm9607-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,mdm9607-tlmm.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/pinctrl/qcom,mdm9607-pinctrl.yaml# +$id: http://devicetree.org/schemas/pinctrl/qcom,mdm9607-tlmm.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Technologies, Inc. MDM9607 TLMM block @@ -9,12 +9,10 @@ title: Qualcomm Technologies, Inc. MDM9607 TLMM block maintainers: - Konrad Dybcio <konrad.dybcio@somainline.org> -description: | - This binding describes the Top Level Mode Multiplexer block found in the - MDM9607 platform. +description: + Top Level Mode Multiplexer pin controller in Qualcomm MDM9607 SoC. allOf: - - $ref: "pinctrl.yaml#" - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# properties: @@ -26,10 +24,10 @@ properties: interrupts: true interrupt-controller: true - '#interrupt-cells': true + "#interrupt-cells": true gpio-controller: true gpio-reserved-ranges: true - '#gpio-cells': true + "#gpio-cells": true gpio-ranges: true wakeup-parent: true @@ -40,20 +38,20 @@ required: additionalProperties: false patternProperties: - '-state$': + "-state$": oneOf: - $ref: "#/$defs/qcom-mdm9607-tlmm-state" - patternProperties: ".*": $ref: "#/$defs/qcom-mdm9607-tlmm-state" -'$defs': +$defs: qcom-mdm9607-tlmm-state: type: object description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state" + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state properties: pins: @@ -115,20 +113,19 @@ patternProperties: required: - pins - - function additionalProperties: false examples: - | - #include <dt-bindings/interrupt-controller/arm-gic.h> - tlmm: pinctrl@1000000 { - compatible = "qcom,mdm9607-tlmm"; - reg = <0x01000000 0x300000>; - interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - gpio-ranges = <&msmgpio 0 0 80>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; + #include <dt-bindings/interrupt-controller/arm-gic.h> + tlmm: pinctrl@1000000 { + compatible = "qcom,mdm9607-tlmm"; + reg = <0x01000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + gpio-ranges = <&msmgpio 0 0 80>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,mdm9615-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,mdm9615-pinctrl.txt deleted file mode 100644 index d4697396887387..00000000000000 --- a/Documentation/devicetree/bindings/pinctrl/qcom,mdm9615-pinctrl.txt +++ /dev/null @@ -1,161 +0,0 @@ -Qualcomm MDM9615 TLMM block - -This binding describes the Top Level Mode Multiplexer block found in the -MDM9615 platform. - -- compatible: - Usage: required - Value type: <string> - Definition: must be "qcom,mdm9615-pinctrl" - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: the base address and size of the TLMM register space. - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: should specify the TLMM summary IRQ. - -- interrupt-controller: - Usage: required - Value type: <none> - Definition: identifies this node as an interrupt controller - -- #interrupt-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/interrupt-controller/irq.h> - -- gpio-controller: - Usage: required - Value type: <none> - Definition: identifies this node as a gpio controller - -- #gpio-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/gpio/gpio.h> - -- gpio-ranges: - Usage: required - Definition: see ../gpio/gpio.txt - -- gpio-reserved-ranges: - Usage: optional - Definition: see ../gpio/gpio.txt - -Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for -a general description of GPIO and interrupt bindings. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -The pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those pin(s)/group(s), and various pin configuration -parameters, such as pull-up, drive strength, etc. - - -PIN CONFIGURATION NODES: - -The name of each subnode is not important; all subnodes should be enumerated -and processed purely based on their content. - -Each subnode only affects those parameters that are explicitly listed. In -other words, a subnode that lists a mux function but no pin configuration -parameters implies no information about any pin configuration parameters. -Similarly, a pin subnode that describes a pullup parameter implies no -information about e.g. the mux function. - - -The following generic properties as defined in pinctrl-bindings.txt are valid -to specify in a pin configuration subnode: - -- pins: - Usage: required - Value type: <string-array> - Definition: List of gpio pins affected by the properties specified in - this subnode. Valid pins are: - gpio0-gpio87 - -- function: - Usage: required - Value type: <string> - Definition: Specify the alternative function to be configured for the - specified pins. - Valid values are: - gpio, gsbi2_i2c, gsbi3, gsbi4, gsbi5_i2c, gsbi5_uart, - sdc2, ebi2_lcdc, ps_hold, prim_audio, sec_audio, - cdc_mclk - -- bias-disable: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as no pull. - -- bias-pull-down: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull down. - -- bias-pull-up: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull up. - -- output-high: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - high. - -- output-low: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - low. - -- drive-strength: - Usage: optional - Value type: <u32> - Definition: Selects the drive strength for the specified pins, in mA. - Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 - -Example: - - msmgpio: pinctrl@800000 { - compatible = "qcom,mdm9615-pinctrl"; - reg = <0x800000 0x4000>; - - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&msmgpio 0 0 88>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <0 16 0x4>; - - gsbi8_uart: gsbi8-uart { - mux { - pins = "gpio34", "gpio35"; - function = "gsbi8"; - }; - - tx { - pins = "gpio34"; - drive-strength = <4>; - bias-disable; - }; - - rx { - pins = "gpio35"; - drive-strength = <2>; - bias-pull-up; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,mdm9615-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,mdm9615-pinctrl.yaml new file mode 100644 index 00000000000000..a4f6e4c588f425 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,mdm9615-pinctrl.yaml @@ -0,0 +1,119 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,mdm9615-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. MDM9615 TLMM block + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + +description: Top Level Mode Multiplexer pin controller in Qualcomm MDM9615 SoC. + +$ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + const: qcom,mdm9615-pinctrl + + reg: + maxItems: 1 + + interrupts: true + interrupt-controller: true + '#interrupt-cells': true + gpio-controller: true + '#gpio-cells': true + gpio-ranges: true + +required: + - compatible + - reg + +additionalProperties: false + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-mdm9615-pinctrl-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-mdm9615-pinctrl-state" + additionalProperties: false + +$defs: + qcom-mdm9615-pinctrl-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + pattern: "^gpio([0-9]|[1-7][0-9]|8[0-7])$" + minItems: 1 + maxItems: 16 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ gpio, gsbi2_i2c, gsbi3, gsbi4, gsbi5_i2c, gsbi5_uart, + sdc2, ebi2_lcdc, ps_hold, prim_audio, sec_audio, cdc_mclk, ] + + bias-disable: true + bias-pull-down: true + bias-pull-up: true + drive-strength: true + output-high: true + output-low: true + input-enable: true + + required: + - pins + + additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + tlmm: pinctrl@1000000 { + compatible = "qcom,mdm9615-pinctrl"; + reg = <0x01000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + gpio-ranges = <&msmgpio 0 0 88>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + gsbi3-state { + pins = "gpio8", "gpio9", "gpio10", "gpio11"; + function = "gsbi3"; + drive-strength = <8>; + bias-disable; + }; + + gsbi5-i2c-state { + sda-pins { + pins = "gpio16"; + function = "gsbi5_i2c"; + drive-strength = <8>; + bias-disable; + }; + + scl-pins { + pins = "gpio17"; + function = "gsbi5_i2c"; + drive-strength = <2>; + bias-disable; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml index ab4a2b4cfda24b..3b79f5be860ba5 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml @@ -9,9 +9,8 @@ title: Qualcomm Technologies, Inc. MSM8226 TLMM block maintainers: - Bjorn Andersson <bjorn.andersson@linaro.org> -description: | - This binding describes the Top Level Mode Multiplexer block found in the - MSM8226 platform. +description: + Top Level Mode Multiplexer pin controller in Qualcomm MSM8226 SoC. properties: compatible: @@ -21,38 +20,32 @@ properties: description: Specifies the base address and size of the TLMM register space maxItems: 1 - interrupts: - description: Specifies the TLMM summary IRQ - maxItems: 1 - + interrupts: true interrupt-controller: true - - '#interrupt-cells': - description: Specifies the PIN numbers and Flags, as defined in - include/dt-bindings/interrupt-controller/irq.h - const: 2 - + "#interrupt-cells": true gpio-controller: true - - '#gpio-cells': - description: Specifying the pin number and flags, as defined in - include/dt-bindings/gpio/gpio.h - const: 2 - - gpio-ranges: - maxItems: 1 + "#gpio-cells": true + gpio-ranges: true gpio-reserved-ranges: maxItems: 1 -#PIN CONFIGURATION NODES patternProperties: - '-pins$': + "-state$": + oneOf: + - $ref: "#/$defs/qcom-msm8226-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-msm8226-tlmm-state" + additionalProperties: false + +$defs: + qcom-msm8226-tlmm-state: type: object description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. - $ref: "/schemas/pinctrl/pincfg-node.yaml" + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state properties: pins: @@ -71,65 +64,51 @@ patternProperties: Specify the alternative function to be configured for the specified pins. Functions are only valid for gpio pins. enum: [ gpio, cci_i2c0, blsp_uim1, blsp_uim2, blsp_uim3, blsp_uim5, - blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c5, blsp_spi1, + blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4, blsp_i2c5, blsp_spi1, blsp_spi2, blsp_spi3, blsp_spi5, blsp_uart1, blsp_uart2, - blsp_uart3, blsp_uart5, cam_mclk0, cam_mclk1, wlan ] - - drive-strength: - enum: [2, 4, 6, 8, 10, 12, 14, 16] - default: 2 - description: - Selects the drive strength for the specified pins, in mA. + blsp_uart3, blsp_uart4, blsp_uart5, cam_mclk0, cam_mclk1, sdc3, + wlan ] bias-pull-down: true - bias-pull-up: true - bias-disable: true - + drive-strength: true + input-enable: true output-high: true - output-low: true required: - pins - - function additionalProperties: false allOf: - - $ref: "pinctrl.yaml#" + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# required: - compatible - reg - - interrupts - - interrupt-controller - - '#interrupt-cells' - - gpio-controller - - '#gpio-cells' - - gpio-ranges additionalProperties: false examples: - | - #include <dt-bindings/interrupt-controller/arm-gic.h> - msmgpio: pinctrl@fd510000 { - compatible = "qcom,msm8226-pinctrl"; - reg = <0xfd510000 0x4000>; - - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&msmgpio 0 0 117>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; - - serial-pins { - pins = "gpio8", "gpio9"; - function = "blsp_uart3"; - drive-strength = <8>; - bias-disable; - }; + #include <dt-bindings/interrupt-controller/arm-gic.h> + msmgpio: pinctrl@fd510000 { + compatible = "qcom,msm8226-pinctrl"; + reg = <0xfd510000 0x4000>; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&msmgpio 0 0 117>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + + serial-state { + pins = "gpio8", "gpio9"; + function = "blsp_uart3"; + drive-strength = <8>; + bias-disable; }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.txt deleted file mode 100644 index f095209848c804..00000000000000 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.txt +++ /dev/null @@ -1,96 +0,0 @@ -Qualcomm MSM8660 TLMM block - -Required properties: -- compatible: "qcom,msm8660-pinctrl" -- reg: Should be the base address and length of the TLMM block. -- interrupts: Should be the parent IRQ of the TLMM block. -- interrupt-controller: Marks the device node as an interrupt controller. -- #interrupt-cells: Should be two. -- gpio-controller: Marks the device node as a GPIO controller. -- #gpio-cells : Should be two. - The first cell is the gpio pin number and the - second cell is used for optional parameters. -- gpio-ranges: see ../gpio/gpio.txt - -Optional properties: - -- gpio-reserved-ranges: see ../gpio/gpio.txt - -Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for -a general description of GPIO and interrupt bindings. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -Qualcomm's pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those pin(s)/group(s), and various pin configuration -parameters, such as pull-up, drive strength, etc. - -The name of each subnode is not important; all subnodes should be enumerated -and processed purely based on their content. - -Each subnode only affects those parameters that are explicitly listed. In -other words, a subnode that lists a mux function but no pin configuration -parameters implies no information about any pin configuration parameters. -Similarly, a pin subnode that describes a pullup parameter implies no -information about e.g. the mux function. - - -The following generic properties as defined in pinctrl-bindings.txt are valid -to specify in a pin configuration subnode: - - pins, function, bias-disable, bias-pull-down, bias-pull-up, drive-strength, - output-low, output-high. - -Non-empty subnodes must specify the 'pins' property. - -Valid values for pins are: - gpio0-gpio172, sdc3_clk, sdc3_cmd, sdc3_data sdc4_clk, sdc4_cmd, sdc4_data - -Valid values for function are: - gpio, cam_mclk, dsub, ext_gps, gp_clk_0a, gp_clk_0b, gp_clk_1a, gp_clk_1b, - gp_clk_2a, gp_clk_2b, gp_mn, gsbi1, gsbi1_spi_cs1_n, gsbi1_spi_cs2a_n, - gsbi1_spi_cs2b_n, gsbi1_spi_cs3_n, gsbi2, gsbi2_spi_cs1_n, gsbi2_spi_cs2_n, - gsbi2_spi_cs3_n, gsbi3, gsbi3_spi_cs1_n, gsbi3_spi_cs2_n, gsbi3_spi_cs3_n, - gsbi4, gsbi5, gsbi6, gsbi7, gsbi8, gsbi9, gsbi10, gsbi11, gsbi12, hdmi, i2s, - lcdc, mdp_vsync, mi2s, pcm, ps_hold, sdc1, sdc2, sdc5, tsif1, tsif2, usb_fs1, - usb_fs1_oe_n, usb_fs2, usb_fs2_oe_n, vfe, vsens_alarm, ebi2, ebi2cs - -Example: - - msmgpio: pinctrl@800000 { - compatible = "qcom,msm8660-pinctrl"; - reg = <0x800000 0x4000>; - - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&msmgpio 0 0 173>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <0 16 0x4>; - - pinctrl-names = "default"; - pinctrl-0 = <&gsbi12_uart>; - - gsbi12_uart: gsbi12-uart { - mux { - pins = "gpio117", "gpio118"; - function = "gsbi12"; - }; - - tx { - pins = "gpio118"; - drive-strength = <8>; - bias-disable; - }; - - rx { - pins = "gpio117"; - drive-strength = <2>; - bias-pull-up; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.yaml new file mode 100644 index 00000000000000..ad0cad4694c0da --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.yaml @@ -0,0 +1,125 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,msm8660-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm MSM8660 TLMM pin controller + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm MSM8660 SoC. + +properties: + compatible: + const: qcom,msm8660-pinctrl + + reg: + maxItems: 1 + + interrupts: true + interrupt-controller: true + "#interrupt-cells": true + gpio-controller: true + "#gpio-cells": true + gpio-ranges: true + wakeup-parent: true + + gpio-reserved-ranges: + minItems: 1 + maxItems: 86 + + gpio-line-names: + maxItems: 173 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-msm8660-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-msm8660-tlmm-state" + additionalProperties: false + +$defs: + qcom-msm8660-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-6][0-9]|17[0-2])$" + - enum: [ sdc3_clk, sdc3_cmd, sdc3_data, sdc4_clk, sdc4_cmd, sdc4_data ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ gpio, cam_mclk, dsub, ext_gps, gp_clk_0a, gp_clk_0b, gp_clk_1a, + gp_clk_1b, gp_clk_2a, gp_clk_2b, gp_mn, gsbi1, gsbi1_spi_cs1_n, + gsbi1_spi_cs2a_n, gsbi1_spi_cs2b_n, gsbi1_spi_cs3_n, gsbi2, + gsbi2_spi_cs1_n, gsbi2_spi_cs2_n, gsbi2_spi_cs3_n, gsbi3, + gsbi3_spi_cs1_n, gsbi3_spi_cs2_n, gsbi3_spi_cs3_n, gsbi4, + gsbi5, gsbi6, gsbi7, gsbi8, gsbi9, gsbi10, gsbi11, gsbi12, + hdmi, i2s, lcdc, mdp_vsync, mi2s, pcm, ps_hold, sdc1, sdc2, + sdc5, tsif1, tsif2, usb_fs1, usb_fs1_oe_n, usb_fs2, + usb_fs2_oe_n, vfe, vsens_alarm, ebi2, ebi2cs ] + + + bias-pull-down: true + bias-pull-up: true + bias-disable: true + drive-strength: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + + additionalProperties: false + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + tlmm: pinctrl@800000 { + compatible = "qcom,msm8660-pinctrl"; + reg = <0x800000 0x4000>; + + gpio-controller; + gpio-ranges = <&tlmm 0 0 173>; + #gpio-cells = <2>; + interrupts = <0 16 0x4>; + interrupt-controller; + #interrupt-cells = <2>; + + gsbi3-i2c-state { + pins = "gpio43", "gpio44"; + function = "gsbi3"; + drive-strength = <8>; + bias-disable; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml index e03530091478c8..cc6d0c9c510019 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml @@ -10,8 +10,7 @@ maintainers: - Stephan Gerhold <stephan@gerhold.net> description: | - This binding describes the Top Level Mode Multiplexer (TLMM) block found - in the MSM8909 platform. + Top Level Mode Multiplexer pin controller in Qualcomm MSM8909 SoC. allOf: - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# @@ -25,10 +24,10 @@ properties: interrupts: true interrupt-controller: true - '#interrupt-cells': true + "#interrupt-cells": true gpio-controller: true gpio-reserved-ranges: true - '#gpio-cells': true + "#gpio-cells": true gpio-ranges: true wakeup-parent: true @@ -39,12 +38,13 @@ required: additionalProperties: false patternProperties: - '-state$': + "-state$": oneOf: - $ref: "#/$defs/qcom-msm8909-tlmm-state" - patternProperties: - ".*": + "-pins$": $ref: "#/$defs/qcom-msm8909-tlmm-state" + additionalProperties: false $defs: qcom-msm8909-tlmm-state: @@ -52,7 +52,7 @@ $defs: description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state" + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state properties: pins: @@ -112,41 +112,40 @@ $defs: required: - pins - - function additionalProperties: false examples: - | - #include <dt-bindings/interrupt-controller/arm-gic.h> - - pinctrl@1000000 { - compatible = "qcom,msm8909-tlmm"; - reg = <0x1000000 0x300000>; - interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&tlmm 0 0 117>; - interrupt-controller; - #interrupt-cells = <2>; - - gpio-wo-subnode-state { - pins = "gpio1"; - function = "gpio"; - }; - - uart-w-subnodes-state { - rx { - pins = "gpio4"; - function = "blsp_uart1"; - bias-pull-up; - }; - - tx { - pins = "gpio5"; - function = "blsp_uart1"; - bias-disable; - }; - }; + #include <dt-bindings/interrupt-controller/arm-gic.h> + + pinctrl@1000000 { + compatible = "qcom,msm8909-tlmm"; + reg = <0x1000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 117>; + interrupt-controller; + #interrupt-cells = <2>; + + gpio-wo-subnode-state { + pins = "gpio1"; + function = "gpio"; }; + + uart-w-subnodes-state { + rx-pins { + pins = "gpio4"; + function = "blsp_uart1"; + bias-pull-up; + }; + + tx-pins { + pins = "gpio5"; + function = "blsp_uart1"; + bias-disable; + }; + }; + }; ... diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.txt deleted file mode 100644 index 3354a63296d99a..00000000000000 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.txt +++ /dev/null @@ -1,195 +0,0 @@ -Qualcomm MSM8916 TLMM block - -This binding describes the Top Level Mode Multiplexer block found in the -MSM8916 platform. - -- compatible: - Usage: required - Value type: <string> - Definition: must be "qcom,msm8916-pinctrl" - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: the base address and size of the TLMM register space. - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: should specify the TLMM summary IRQ. - -- interrupt-controller: - Usage: required - Value type: <none> - Definition: identifies this node as an interrupt controller - -- #interrupt-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/interrupt-controller/irq.h> - -- gpio-controller: - Usage: required - Value type: <none> - Definition: identifies this node as a gpio controller - -- #gpio-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/gpio/gpio.h> - -- gpio-ranges: - Usage: required - Definition: see ../gpio/gpio.txt - -- gpio-reserved-ranges: - Usage: optional - Definition: see ../gpio/gpio.txt - -Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for -a general description of GPIO and interrupt bindings. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -The pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those pin(s)/group(s), and various pin configuration -parameters, such as pull-up, drive strength, etc. - - -PIN CONFIGURATION NODES: - -The name of each subnode is not important; all subnodes should be enumerated -and processed purely based on their content. - -Each subnode only affects those parameters that are explicitly listed. In -other words, a subnode that lists a mux function but no pin configuration -parameters implies no information about any pin configuration parameters. -Similarly, a pin subnode that describes a pullup parameter implies no -information about e.g. the mux function. - - -The following generic properties as defined in pinctrl-bindings.txt are valid -to specify in a pin configuration subnode: - -- pins: - Usage: required - Value type: <string-array> - Definition: List of gpio pins affected by the properties specified in - this subnode. Valid pins are: - gpio0-gpio121, - sdc1_clk, - sdc1_cmd, - sdc1_data - sdc2_clk, - sdc2_cmd, - sdc2_data, - qdsd_cmd, - qdsd_data0, - qdsd_data1, - qdsd_data2, - qdsd_data3 - -- function: - Usage: required - Value type: <string> - Definition: Specify the alternative function to be configured for the - specified pins. Functions are only valid for gpio pins. - Valid values are: - adsp_ext, alsp_int, atest_bbrx0, atest_bbrx1, atest_char, atest_char0, - atest_char1, atest_char2, atest_char3, atest_combodac, atest_gpsadc0, - atest_gpsadc1, atest_tsens, atest_wlan0, atest_wlan1, backlight_en, - bimc_dte0,bimc_dte1, blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4, - blsp_i2c5, blsp_i2c6, blsp_spi1, blsp_spi1_cs1, blsp_spi1_cs2, - blsp_spi1_cs3, blsp_spi2, blsp_spi2_cs1, blsp_spi2_cs2, blsp_spi2_cs3, - blsp_spi3, blsp_spi3_cs1, blsp_spi3_cs2, blsp_spi3_cs3, blsp_spi4, - blsp_spi5, blsp_spi6, blsp_uart1, blsp_uart2, blsp_uim1, blsp_uim2, - cam1_rst, cam1_standby, cam_mclk0, cam_mclk1, cci_async, cci_i2c, - cci_timer0, cci_timer1, cci_timer2, cdc_pdm0, codec_mad, dbg_out, - display_5v, dmic0_clk, dmic0_data, dsi_rst, ebi0_wrcdc, euro_us, - ext_lpass, flash_strobe, gcc_gp1_clk_a, gcc_gp1_clk_b, gcc_gp2_clk_a, - gcc_gp2_clk_b, gcc_gp3_clk_a, gcc_gp3_clk_b, gpio, gsm0_tx0, gsm0_tx1, - gsm1_tx0, gsm1_tx1, gyro_accl, kpsns0, kpsns1, kpsns2, ldo_en, - ldo_update, mag_int, mdp_vsync, modem_tsync, m_voc, nav_pps, nav_tsync, - pa_indicator, pbs0, pbs1, pbs2, pri_mi2s, pri_mi2s_ws, prng_rosc, - pwr_crypto_enabled_a, pwr_crypto_enabled_b, pwr_modem_enabled_a, - pwr_modem_enabled_b, pwr_nav_enabled_a, pwr_nav_enabled_b, - qdss_ctitrig_in_a0, qdss_ctitrig_in_a1, qdss_ctitrig_in_b0, - qdss_ctitrig_in_b1, qdss_ctitrig_out_a0, qdss_ctitrig_out_a1, - qdss_ctitrig_out_b0, qdss_ctitrig_out_b1, qdss_traceclk_a, - qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b, qdss_tracedata_a, - qdss_tracedata_b, reset_n, sd_card, sd_write, sec_mi2s, smb_int, - ssbi_wtr0, ssbi_wtr1, uim1, uim2, uim3, uim_batt, wcss_bt, wcss_fm, - wcss_wlan, webcam1_rst - -- bias-disable: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as no pull. - -- bias-pull-down: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull down. - -- bias-pull-up: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull up. - -- output-high: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - high. - Not valid for sdc pins. - -- output-low: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - low. - Not valid for sdc pins. - -- drive-strength: - Usage: optional - Value type: <u32> - Definition: Selects the drive strength for the specified pins, in mA. - Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 - -Example: - - tlmm: pinctrl@1000000 { - compatible = "qcom,msm8916-pinctrl"; - reg = <0x1000000 0x300000>; - interrupts = <0 208 0>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&tlmm 0 0 122>; - interrupt-controller; - #interrupt-cells = <2>; - - uart2: uart2-default { - mux { - pins = "gpio4", "gpio5"; - function = "blsp_uart2"; - }; - - tx { - pins = "gpio4"; - drive-strength = <4>; - bias-disable; - }; - - rx { - pins = "gpio5"; - drive-strength = <2>; - bias-pull-up; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.yaml new file mode 100644 index 00000000000000..5495f58905af0f --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.yaml @@ -0,0 +1,166 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,msm8916-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm MSM8916 TLMM pin controller + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm MSM8916 SoC. + +properties: + compatible: + const: qcom,msm8916-pinctrl + + reg: + maxItems: 1 + + interrupts: true + interrupt-controller: true + "#interrupt-cells": true + gpio-controller: true + "#gpio-cells": true + gpio-ranges: true + wakeup-parent: true + + gpio-reserved-ranges: + minItems: 1 + maxItems: 61 + + gpio-line-names: + maxItems: 122 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-msm8916-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-msm8916-tlmm-state" + additionalProperties: false + +$defs: + qcom-msm8916-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-1][0-9]|12[01])$" + - enum: [ qdsd_clk, qdsd_cmd, qdsd_data0, qdsd_data1, qdsd_data2, + qdsd_data3, sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, + sdc2_cmd, sdc2_data ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ gpio, adsp_ext, alsp_int, atest_bbrx0, atest_bbrx1, atest_char, + atest_char0, atest_char1, atest_char2, atest_char3, + atest_combodac, atest_gpsadc0, atest_gpsadc1, atest_tsens, + atest_wlan0, atest_wlan1, backlight_en, bimc_dte0, bimc_dte1, + blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4, blsp_i2c5, + blsp_i2c6, blsp_spi1, blsp_spi1_cs1, blsp_spi1_cs2, + blsp_spi1_cs3, blsp_spi2, blsp_spi2_cs1, blsp_spi2_cs2, + blsp_spi2_cs3, blsp_spi3, blsp_spi3_cs1, blsp_spi3_cs2, + blsp_spi3_cs3, blsp_spi4, blsp_spi5, blsp_spi6, blsp_uart1, + blsp_uart2, blsp_uim1, blsp_uim2, cam1_rst, cam1_standby, + cam_mclk0, cam_mclk1, cci_async, cci_i2c, cci_timer0, + cci_timer1, cci_timer2, cdc_pdm0, codec_mad, dbg_out, + display_5v, dmic0_clk, dmic0_data, dsi_rst, ebi0_wrcdc, + euro_us, ext_lpass, flash_strobe, gcc_gp1_clk_a, gcc_gp1_clk_b, + gcc_gp2_clk_a, gcc_gp2_clk_b, gcc_gp3_clk_a, gcc_gp3_clk_b, + gsm0_tx0, gsm0_tx1, gsm1_tx0, gsm1_tx1, gyro_accl, kpsns0, + kpsns1, kpsns2, ldo_en, ldo_update, mag_int, mdp_vsync, + modem_tsync, m_voc, nav_pps, nav_tsync, pa_indicator, pbs0, + pbs1, pbs2, pri_mi2s, pri_mi2s_ws, prng_rosc, + pwr_crypto_enabled_a, pwr_crypto_enabled_b, + pwr_modem_enabled_a, pwr_modem_enabled_b, pwr_nav_enabled_a, + pwr_nav_enabled_b, qdss_ctitrig_in_a0, qdss_ctitrig_in_a1, + qdss_ctitrig_in_b0, qdss_ctitrig_in_b1, qdss_ctitrig_out_a0, + qdss_ctitrig_out_a1, qdss_ctitrig_out_b0, qdss_ctitrig_out_b1, + qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a, + qdss_tracectl_b, qdss_tracedata_a, qdss_tracedata_b, reset_n, + sd_card, sd_write, sec_mi2s, smb_int, ssbi_wtr0, ssbi_wtr1, + uim1, uim2, uim3, uim_batt, wcss_bt, wcss_fm, wcss_wlan, + webcam1_rst ] + + bias-pull-down: true + bias-pull-up: true + bias-disable: true + drive-strength: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + + additionalProperties: false + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + msmgpio: pinctrl@1000000 { + compatible = "qcom,msm8916-pinctrl"; + reg = <0x01000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + gpio-ranges = <&msmgpio 0 0 122>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + blsp1-uart2-sleep-state { + pins = "gpio4", "gpio5"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-down; + }; + + spi1-default-state { + spi-pins { + pins = "gpio0", "gpio1", "gpio3"; + function = "blsp_spi1"; + + drive-strength = <12>; + bias-disable; + }; + + cs-pins { + pins = "gpio2"; + function = "gpio"; + + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8953-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8953-pinctrl.yaml index d4da558cde5434..c9a4a79e8d01bb 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8953-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8953-pinctrl.yaml @@ -9,9 +9,8 @@ title: Qualcomm Technologies, Inc. MSM8953 TLMM block maintainers: - Bjorn Andersson <bjorn.andersson@linaro.org> -description: | - This binding describes the Top Level Mode Multiplexer block found in the - MSM8953 platform. +description: + Top Level Mode Multiplexer pin controller in Qualcomm MSM8953 SoC. properties: compatible: @@ -20,38 +19,30 @@ properties: reg: maxItems: 1 - interrupts: - description: Specifies the TLMM summary IRQ - maxItems: 1 - + interrupts: true interrupt-controller: true - - '#interrupt-cells': - description: - Specifies the PIN numbers and Flags, as defined in defined in - include/dt-bindings/interrupt-controller/irq.h - const: 2 - + "#interrupt-cells": true gpio-controller: true - gpio-reserved-ranges: true + "#gpio-cells": true + gpio-ranges: true - '#gpio-cells': - description: Specifying the pin number and flags, as defined in - include/dt-bindings/gpio/gpio.h - const: 2 - - gpio-ranges: - maxItems: 1 - -#PIN CONFIGURATION NODES patternProperties: - '-pins$': + "-state$": + oneOf: + - $ref: "#/$defs/qcom-msm8953-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-msm8953-tlmm-state" + additionalProperties: false + +$defs: + qcom-msm8953-tlmm-state: type: object description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. - $ref: "/schemas/pinctrl/pincfg-node.yaml" + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state properties: pins: @@ -113,60 +104,44 @@ patternProperties: uim_batt, us_emitter, us_euro, wcss_bt, wcss_fm, wcss_wlan, wcss_wlan0, wcss_wlan1, wcss_wlan2, wsa_en, wsa_io, wsa_irq ] - drive-strength: - enum: [2, 4, 6, 8, 10, 12, 14, 16] - default: 2 - description: - Selects the drive strength for the specified pins, in mA. - bias-pull-down: true - bias-pull-up: true - bias-disable: true - + drive-strength: true output-high: true - output-low: true required: - pins - - function additionalProperties: false allOf: - - $ref: "pinctrl.yaml#" + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# required: - compatible - reg - - interrupts - - interrupt-controller - - '#interrupt-cells' - - gpio-controller - - '#gpio-cells' - - gpio-ranges additionalProperties: false examples: - | - #include <dt-bindings/interrupt-controller/arm-gic.h> - tlmm: pinctrl@1000000 { - compatible = "qcom,msm8953-pinctrl"; - reg = <0x01000000 0x300000>; - interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&tlmm 0 0 142>; - - serial_default: serial-pins { - pins = "gpio4", "gpio5"; - function = "blsp_uart2"; - drive-strength = <2>; - bias-disable; - }; + #include <dt-bindings/interrupt-controller/arm-gic.h> + tlmm: pinctrl@1000000 { + compatible = "qcom,msm8953-pinctrl"; + reg = <0x01000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 142>; + + serial_default: serial-state { + pins = "gpio4", "gpio5"; + function = "blsp_uart2"; + drive-strength = <2>; + bias-disable; }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.txt deleted file mode 100644 index a7dd213c77c6f1..00000000000000 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.txt +++ /dev/null @@ -1,190 +0,0 @@ -Qualcomm MSM8960 TLMM block - -This binding describes the Top Level Mode Multiplexer block found in the -MSM8960 platform. - -- compatible: - Usage: required - Value type: <string> - Definition: must be "qcom,msm8960-pinctrl" - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: the base address and size of the TLMM register space. - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: should specify the TLMM summary IRQ. - -- interrupt-controller: - Usage: required - Value type: <none> - Definition: identifies this node as an interrupt controller - -- #interrupt-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/interrupt-controller/irq.h> - -- gpio-controller: - Usage: required - Value type: <none> - Definition: identifies this node as a gpio controller - -- #gpio-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/gpio/gpio.h> - -- gpio-ranges: - Usage: required - Definition: see ../gpio/gpio.txt - -- gpio-reserved-ranges: - Usage: optional - Definition: see ../gpio/gpio.txt - -Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for -a general description of GPIO and interrupt bindings. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -The pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those pin(s)/group(s), and various pin configuration -parameters, such as pull-up, drive strength, etc. - - -PIN CONFIGURATION NODES: - -The name of each subnode is not important; all subnodes should be enumerated -and processed purely based on their content. - -Each subnode only affects those parameters that are explicitly listed. In -other words, a subnode that lists a mux function but no pin configuration -parameters implies no information about any pin configuration parameters. -Similarly, a pin subnode that describes a pullup parameter implies no -information about e.g. the mux function. - - -The following generic properties as defined in pinctrl-bindings.txt are valid -to specify in a pin configuration subnode: - -- pins: - Usage: required - Value type: <string-array> - Definition: List of gpio pins affected by the properties specified in - this subnode. Valid pins are: - gpio0-gpio151, - sdc1_clk, - sdc1_cmd, - sdc1_data - sdc3_clk, - sdc3_cmd, - sdc3_data - -- function: - Usage: required - Value type: <string> - Definition: Specify the alternative function to be configured for the - specified pins. Functions are only valid for gpio pins. - Valid values are: - audio_pcm, bt, cam_mclk0, cam_mclk1, cam_mclk2, - codec_mic_i2s, codec_spkr_i2s, ext_gps, fm, gps_blanking, - gps_pps_in, gps_pps_out, gp_clk_0a, gp_clk_0b, gp_clk_1a, - gp_clk_1b, gp_clk_2a, gp_clk_2b, gp_mn, gp_pdm_0a, - gp_pdm_0b, gp_pdm_1a, gp_pdm_1b, gp_pdm_2a, gp_pdm_2b, gpio, - gsbi1, gsbi1_spi_cs1_n, gsbi1_spi_cs2a_n, gsbi1_spi_cs2b_n, - gsbi1_spi_cs3_n, gsbi2, gsbi2_spi_cs1_n, gsbi2_spi_cs2_n, - gsbi2_spi_cs3_n, gsbi3, gsbi4, gsbi4_3d_cam_i2c_l, - gsbi4_3d_cam_i2c_r, gsbi5, gsbi5_3d_cam_i2c_l, - gsbi5_3d_cam_i2c_r, gsbi6, gsbi7, gsbi8, gsbi9, gsbi10, - gsbi11, gsbi11_spi_cs1a_n, gsbi11_spi_cs1b_n, - gsbi11_spi_cs2a_n, gsbi11_spi_cs2b_n, gsbi11_spi_cs3_n, - gsbi12, hdmi_cec, hdmi_ddc_clock, hdmi_ddc_data, - hdmi_hot_plug_detect, hsic, mdp_vsync, mi2s, mic_i2s, - pmb_clk, pmb_ext_ctrl, ps_hold, rpm_wdog, sdc2, sdc4, sdc5, - slimbus1, slimbus2, spkr_i2s, ssbi1, ssbi2, ssbi_ext_gps, - ssbi_pmic2, ssbi_qpa1, ssbi_ts, tsif1, tsif2, ts_eoc, - usb_fs1, usb_fs1_oe, usb_fs1_oe_n, usb_fs2, usb_fs2_oe, - usb_fs2_oe_n, vfe_camif_timer1_a, vfe_camif_timer1_b, - vfe_camif_timer2, vfe_camif_timer3_a, vfe_camif_timer3_b, - vfe_camif_timer4_a, vfe_camif_timer4_b, vfe_camif_timer4_c, - vfe_camif_timer5_a, vfe_camif_timer5_b, vfe_camif_timer6_a, - vfe_camif_timer6_b, vfe_camif_timer6_c, vfe_camif_timer7_a, - vfe_camif_timer7_b, vfe_camif_timer7_c, wlan - -- bias-disable: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as no pull. - -- bias-pull-down: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull down. - -- bias-pull-up: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull up. - -- output-high: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - high. - Not valid for sdc pins. - -- output-low: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - low. - Not valid for sdc pins. - -- drive-strength: - Usage: optional - Value type: <u32> - Definition: Selects the drive strength for the specified pins, in mA. - Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 - -Example: - - msmgpio: pinctrl@800000 { - compatible = "qcom,msm8960-pinctrl"; - reg = <0x800000 0x4000>; - - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&msmgpio 0 0 152>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <0 16 0x4>; - - gsbi8_uart: gsbi8-uart { - mux { - pins = "gpio34", "gpio35"; - function = "gsbi8"; - }; - - tx { - pins = "gpio34"; - drive-strength = <4>; - bias-disable; - }; - - rx { - pins = "gpio35"; - drive-strength = <2>; - bias-pull-up; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.yaml new file mode 100644 index 00000000000000..33d07d53127301 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.yaml @@ -0,0 +1,164 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,msm8960-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm MSM8960 TLMM pin controller + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm MSM8960 SoC. + +properties: + compatible: + const: qcom,msm8960-pinctrl + + reg: + maxItems: 1 + + interrupts: true + interrupt-controller: true + "#interrupt-cells": true + gpio-controller: true + "#gpio-cells": true + gpio-ranges: true + wakeup-parent: true + + gpio-reserved-ranges: + minItems: 1 + maxItems: 76 + + gpio-line-names: + maxItems: 152 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-msm8960-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-msm8960-tlmm-state" + additionalProperties: false + +$defs: + qcom-msm8960-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9]|15[0-1])$" + - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc3_clk, sdc3_cmd, + sdc3_data ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ gpio, audio_pcm, bt, cam_mclk0, cam_mclk1, cam_mclk2, + codec_mic_i2s, codec_spkr_i2s, ext_gps, fm, gps_blanking, + gps_pps_in, gps_pps_out, gp_clk_0a, gp_clk_0b, gp_clk_1a, + gp_clk_1b, gp_clk_2a, gp_clk_2b, gp_mn, gp_pdm_0a, gp_pdm_0b, + gp_pdm_1a, gp_pdm_1b, gp_pdm_2a, gp_pdm_2b, gsbi1, + gsbi1_spi_cs1_n, gsbi1_spi_cs2a_n, gsbi1_spi_cs2b_n, + gsbi1_spi_cs3_n, gsbi2, gsbi2_spi_cs1_n, gsbi2_spi_cs2_n, + gsbi2_spi_cs3_n, gsbi3, gsbi4, gsbi4_3d_cam_i2c_l, + gsbi4_3d_cam_i2c_r, gsbi5, gsbi5_3d_cam_i2c_l, + gsbi5_3d_cam_i2c_r, gsbi6, gsbi7, gsbi8, gsbi9, gsbi10, gsbi11, + gsbi11_spi_cs1a_n, gsbi11_spi_cs1b_n, gsbi11_spi_cs2a_n, + gsbi11_spi_cs2b_n, gsbi11_spi_cs3_n, gsbi12, hdmi_cec, + hdmi_ddc_clock, hdmi_ddc_data, hdmi_hot_plug_detect, hsic, + mdp_vsync, mi2s, mic_i2s, pmb_clk, pmb_ext_ctrl, ps_hold, + rpm_wdog, sdc2, sdc4, sdc5, slimbus1, slimbus2, spkr_i2s, + ssbi1, ssbi2, ssbi_ext_gps, ssbi_pmic2, ssbi_qpa1, ssbi_ts, + tsif1, tsif2, ts_eoc, usb_fs1, usb_fs1_oe, usb_fs1_oe_n, + usb_fs2, usb_fs2_oe, usb_fs2_oe_n, vfe_camif_timer1_a, + vfe_camif_timer1_b, vfe_camif_timer2, vfe_camif_timer3_a, + vfe_camif_timer3_b, vfe_camif_timer4_a, vfe_camif_timer4_b, + vfe_camif_timer4_c, vfe_camif_timer5_a, vfe_camif_timer5_b, + vfe_camif_timer6_a, vfe_camif_timer6_b, vfe_camif_timer6_c, + vfe_camif_timer7_a, vfe_camif_timer7_b, vfe_camif_timer7_c, + wlan ] + + bias-pull-down: true + bias-pull-up: true + bias-disable: true + drive-strength: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + + additionalProperties: false + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + msmgpio: pinctrl@800000 { + compatible = "qcom,msm8960-pinctrl"; + reg = <0x800000 0x4000>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&msmgpio 0 0 152>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + + spi1-default-state { + mosi-pins { + pins = "gpio6"; + function = "gsbi1"; + drive-strength = <12>; + bias-disable; + }; + + miso-pins { + pins = "gpio7"; + function = "gsbi1"; + drive-strength = <12>; + bias-disable; + }; + + cs-pins { + pins = "gpio8"; + function = "gpio"; + drive-strength = <12>; + bias-disable; + output-low; + }; + + clk-pins { + pins = "gpio9"; + function = "gsbi1"; + drive-strength = <12>; + bias-disable; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt deleted file mode 100644 index 0040565066795e..00000000000000 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt +++ /dev/null @@ -1,121 +0,0 @@ -Qualcomm MSM8974 TLMM block - -Required properties: -- compatible: "qcom,msm8974-pinctrl" -- reg: Should be the base address and length of the TLMM block. -- interrupts: Should be the parent IRQ of the TLMM block. -- interrupt-controller: Marks the device node as an interrupt controller. -- #interrupt-cells: Should be two. -- gpio-controller: Marks the device node as a GPIO controller. -- #gpio-cells : Should be two. - The first cell is the gpio pin number and the - second cell is used for optional parameters. -- gpio-ranges: see ../gpio/gpio.txt - -Optional properties: - -- gpio-reserved-ranges: see ../gpio/gpio.txt - -Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for -a general description of GPIO and interrupt bindings. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -Qualcomm's pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those pin(s)/group(s), and various pin configuration -parameters, such as pull-up, drive strength, etc. - -The name of each subnode is not important; all subnodes should be enumerated -and processed purely based on their content. - -Each subnode only affects those parameters that are explicitly listed. In -other words, a subnode that lists a mux function but no pin configuration -parameters implies no information about any pin configuration parameters. -Similarly, a pin subnode that describes a pullup parameter implies no -information about e.g. the mux function. - - -The following generic properties as defined in pinctrl-bindings.txt are valid -to specify in a pin configuration subnode: - pins, function, bias-disable, bias-pull-down, bias-pull-up, drive-strength. - -Non-empty subnodes must specify the 'pins' property. -Note that not all properties are valid for all pins. - - -Valid values for pins are: - gpio0-gpio145 - Supports mux, bias and drive-strength - - sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data - Supports bias and drive-strength - - hsic_data, hsic_strobe - Supports only mux - -Valid values for function are: - cci_i2c0, cci_i2c1, uim1, uim2, uim_batt_alarm, - blsp_uim1, blsp_uart1, blsp_i2c1, blsp_spi1, - blsp_uim2, blsp_uart2, blsp_i2c2, blsp_spi2, - blsp_uim3, blsp_uart3, blsp_i2c3, blsp_spi3, - blsp_uim4, blsp_uart4, blsp_i2c4, blsp_spi4, - blsp_uim5, blsp_uart5, blsp_i2c5, blsp_spi5, - blsp_uim6, blsp_uart6, blsp_i2c6, blsp_spi6, - blsp_uim7, blsp_uart7, blsp_i2c7, blsp_spi7, - blsp_uim8, blsp_uart8, blsp_i2c8, blsp_spi8, - blsp_uim9, blsp_uart9, blsp_i2c9, blsp_spi9, - blsp_uim10, blsp_uart10, blsp_i2c10, blsp_spi10, - blsp_uim11, blsp_uart11, blsp_i2c11, blsp_spi11, - blsp_uim12, blsp_uart12, blsp_i2c12, blsp_spi12, - blsp_spi1_cs1, blsp_spi2_cs2, blsp_spi_cs3, blsp_spi2_cs1, blsp_spi2_cs2 - blsp_spi2_cs3, blsp_spi10_cs1, blsp_spi10_cs2, blsp_spi10_cs3, - sdc3, sdc4, gcc_gp_clk1, gcc_gp_clk2, gcc_gp_clk3, cci_timer0, cci_timer1, - cci_timer2, cci_timer3, cci_async_in0, cci_async_in1, cci_async_in2, - cam_mckl0, cam_mclk1, cam_mclk2, cam_mclk3, mdp_vsync, hdmi_cec, hdmi_ddc, - hdmi_hpd, edp_hpd, gp_pdm0, gp_pdm1, gp_pdm2, gp_pdm3, gp0_clk, gp1_clk, - gp_mn, tsif1, tsif2, hsic, grfc, audio_ref_clk, qua_mi2s, pri_mi2s, spkr_mi2s, - ter_mi2s, sec_mi2s, bt, fm, wlan, slimbus, hsic_ctl, gpio - - (Note that this is not yet the complete list of functions) - - - -Example: - - msmgpio: pinctrl@fd510000 { - compatible = "qcom,msm8974-pinctrl"; - reg = <0xfd510000 0x4000>; - - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&msmgpio 0 0 146>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <0 208 0>; - - pinctrl-names = "default"; - pinctrl-0 = <&uart2_default>; - - uart2_default: uart2_default { - mux { - pins = "gpio4", "gpio5"; - function = "blsp_uart2"; - }; - - tx { - pins = "gpio4"; - drive-strength = <4>; - bias-disable; - }; - - rx { - pins = "gpio5"; - drive-strength = <2>; - bias-pull-up; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.yaml new file mode 100644 index 00000000000000..9287cbbff7111e --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.yaml @@ -0,0 +1,179 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,msm8974-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm MSM8974 TLMM pin controller + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm MSM8974 SoC. + +properties: + compatible: + const: qcom,msm8974-pinctrl + + reg: + maxItems: 1 + + interrupts: true + interrupt-controller: true + "#interrupt-cells": true + gpio-controller: true + "#gpio-cells": true + gpio-ranges: true + wakeup-parent: true + + gpio-reserved-ranges: + minItems: 1 + maxItems: 73 + + gpio-line-names: + maxItems: 146 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-msm8974-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-msm8974-tlmm-state" + additionalProperties: false + +$defs: + qcom-msm8974-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-3][0-9]|14[0-5])$" + - enum: [ hsic_data, hsic_strobe, sdc1_clk, sdc1_cmd, sdc1_data, + sdc2_clk, sdc2_cmd, sdc2_data ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ gpio, cci_i2c0, cci_i2c1, uim1, uim2, uim_batt_alarm, + blsp_uim1, blsp_uart1, blsp_i2c1, blsp_spi1, blsp_uim2, + blsp_uart2, blsp_i2c2, blsp_spi2, blsp_uim3, blsp_uart3, + blsp_i2c3, blsp_spi3, blsp_uim4, blsp_uart4, blsp_i2c4, + blsp_spi4, blsp_uim5, blsp_uart5, blsp_i2c5, blsp_spi5, + blsp_uim6, blsp_uart6, blsp_i2c6, blsp_spi6, blsp_uim7, + blsp_uart7, blsp_i2c7, blsp_spi7, blsp_uim8, blsp_uart8, + blsp_i2c8, blsp_spi8, blsp_uim9, blsp_uart9, blsp_i2c9, + blsp_spi9, blsp_uim10, blsp_uart10, blsp_i2c10, blsp_spi10, + blsp_uim11, blsp_uart11, blsp_i2c11, blsp_spi11, blsp_uim12, + blsp_uart12, blsp_i2c12, blsp_spi12, blsp_spi1_cs1, + blsp_spi2_cs2, blsp_spi_cs3, blsp_spi2_cs1, blsp_spi2_cs2 + blsp_spi2_cs3, blsp_spi10_cs1, blsp_spi10_cs2, blsp_spi10_cs3, + sdc3, sdc4, gcc_gp_clk1, gcc_gp_clk2, gcc_gp_clk3, cci_timer0, + cci_timer1, cci_timer2, cci_timer3, cci_async_in0, + cci_async_in1, cci_async_in2, cam_mckl0, cam_mclk1, cam_mclk2, + cam_mclk3, mdp_vsync, hdmi_cec, hdmi_ddc, hdmi_hpd, edp_hpd, + gp_pdm0, gp_pdm1, gp_pdm2, gp_pdm3, gp0_clk, gp1_clk, gp_mn, + tsif1, tsif2, hsic, grfc, audio_ref_clk, qua_mi2s, pri_mi2s, + spkr_mi2s, ter_mi2s, sec_mi2s, bt, fm, wlan, slimbus, hsic_ctl ] + + bias-pull-down: true + bias-pull-up: true + bias-disable: true + drive-strength: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + + allOf: + - if: + properties: + pins: + contains: + enum: + - hsic_data + - hsic_strobe + required: + - pins + then: + properties: + bias-pull-down: false + bias-pull-up: false + bias-disable: false + drive-strength: false + input-enable: false + output-high: false + output-low: false + + additionalProperties: false + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + tlmm: pinctrl@fd510000 { + compatible = "qcom,msm8974-pinctrl"; + reg = <0xfd510000 0x4000>; + gpio-controller; + gpio-ranges = <&tlmm 0 0 146>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + + sdc1-off-state { + clk-pins { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd-pins { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data-pins { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <2>; + }; + }; + + blsp2-uart1-sleep-state { + pins = "gpio41", "gpio42", "gpio43", "gpio44"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + hsic-state { + pins = "hsic_data", "hsic_strobe"; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8976-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8976-pinctrl.txt deleted file mode 100644 index 70d04d12f136ec..00000000000000 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8976-pinctrl.txt +++ /dev/null @@ -1,183 +0,0 @@ -Qualcomm MSM8976 TLMM block - -This binding describes the Top Level Mode Multiplexer block found in the -MSM8956 and MSM8976 platforms. - -- compatible: - Usage: required - Value type: <string> - Definition: must be "qcom,msm8976-pinctrl" - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: the base address and size of the TLMM register space. - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: should specify the TLMM summary IRQ. - -- interrupt-controller: - Usage: required - Value type: <none> - Definition: identifies this node as an interrupt controller - -- #interrupt-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/interrupt-controller/irq.h> - -- gpio-controller: - Usage: required - Value type: <none> - Definition: identifies this node as a gpio controller - -- #gpio-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/gpio/gpio.h> - -- gpio-ranges: - Usage: required - Definition: see ../gpio/gpio.txt - -- gpio-reserved-ranges: - Usage: optional - Definition: see ../gpio/gpio.txt - -Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for -a general description of GPIO and interrupt bindings. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -The pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those pin(s)/group(s), and various pin configuration -parameters, such as pull-up, drive strength, etc. - - -PIN CONFIGURATION NODES: - -The name of each subnode is not important; all subnodes should be enumerated -and processed purely based on their content. - -Each subnode only affects those parameters that are explicitly listed. In -other words, a subnode that lists a mux function but no pin configuration -parameters implies no information about any pin configuration parameters. -Similarly, a pin subnode that describes a pullup parameter implies no -information about e.g. the mux function. - - -The following generic properties as defined in pinctrl-bindings.txt are valid -to specify in a pin configuration subnode: - -- pins: - Usage: required - Value type: <string-array> - Definition: List of gpio pins affected by the properties specified in - this subnode. - - Valid pins are: - gpio0-gpio145 - Supports mux, bias and drive-strength - - sdc1_clk, sdc1_cmd, sdc1_data, - sdc2_clk, sdc2_cmd, sdc2_data, - sdc3_clk, sdc3_cmd, sdc3_data - Supports bias and drive-strength - -- function: - Usage: required - Value type: <string> - Definition: Specify the alternative function to be configured for the - specified pins. Functions are only valid for gpio pins. - Valid values are: - - gpio, blsp_uart1, blsp_spi1, smb_int, blsp_i2c1, blsp_spi2, - blsp_uart2, blsp_i2c2, gcc_gp1_clk_b, blsp_spi3, - qdss_tracedata_b, blsp_i2c3, gcc_gp2_clk_b, gcc_gp3_clk_b, - blsp_spi4, cap_int, blsp_i2c4, blsp_spi5, blsp_uart5, - qdss_traceclk_a, m_voc, blsp_i2c5, qdss_tracectl_a, - qdss_tracedata_a, blsp_spi6, blsp_uart6, qdss_tracectl_b, - blsp_i2c6, qdss_traceclk_b, mdp_vsync, pri_mi2s_mclk_a, - sec_mi2s_mclk_a, cam_mclk, cci0_i2c, cci1_i2c, blsp1_spi, - blsp3_spi, gcc_gp1_clk_a, gcc_gp2_clk_a, gcc_gp3_clk_a, - uim_batt, sd_write, uim1_data, uim1_clk, uim1_reset, - uim1_present, uim2_data, uim2_clk, uim2_reset, - uim2_present, ts_xvdd, mipi_dsi0, us_euro, ts_resout, - ts_sample, sec_mi2s_mclk_b, pri_mi2s, codec_reset, - cdc_pdm0, us_emitter, pri_mi2s_mclk_b, pri_mi2s_mclk_c, - lpass_slimbus, lpass_slimbus0, lpass_slimbus1, codec_int1, - codec_int2, wcss_bt, sdc3, wcss_wlan2, wcss_wlan1, - wcss_wlan0, wcss_wlan, wcss_fm, key_volp, key_snapshot, - key_focus, key_home, pwr_down, dmic0_clk, hdmi_int, - dmic0_data, wsa_vi, wsa_en, blsp_spi8, wsa_irq, blsp_i2c8, - pa_indicator, modem_tsync, ssbi_wtr1, gsm1_tx, gsm0_tx, - sdcard_det, sec_mi2s, ss_switch, - -- bias-disable: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as no pull. - -- bias-pull-down: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull down. - -- bias-pull-up: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull up. - -- output-high: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - high. - Not valid for sdc pins. - -- output-low: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - low. - Not valid for sdc pins. - -- drive-strength: - Usage: optional - Value type: <u32> - Definition: Selects the drive strength for the specified pins, in mA. - Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 - -Example: - - tlmm: pinctrl@1000000 { - compatible = "qcom,msm8976-pinctrl"; - reg = <0x1000000 0x300000>; - interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&tlmm 0 0 145>; - interrupt-controller; - #interrupt-cells = <2>; - - blsp1_uart2_active: blsp1_uart2_active { - mux { - pins = "gpio4", "gpio5", "gpio6", "gpio7"; - function = "blsp_uart2"; - }; - - config { - pins = "gpio4", "gpio5", "gpio6", "gpio7"; - drive-strength = <2>; - bias-disable; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8976-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8976-pinctrl.yaml new file mode 100644 index 00000000000000..858f45710fe267 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8976-pinctrl.yaml @@ -0,0 +1,136 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,msm8976-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm MSM8976 TLMM pin controller + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm MSM8976 SoC. + +properties: + compatible: + const: qcom,msm8976-pinctrl + + reg: + maxItems: 1 + + interrupts: true + interrupt-controller: true + "#interrupt-cells": true + gpio-controller: true + "#gpio-cells": true + gpio-ranges: true + wakeup-parent: true + + gpio-reserved-ranges: + minItems: 1 + maxItems: 73 + + gpio-line-names: + maxItems: 145 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-msm8976-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-msm8976-tlmm-state" + additionalProperties: false + +$defs: + qcom-msm8976-tlmm-state: + type: object + description: + Desired pin configuration for a device or its specific state (like sleep + or active). + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this state. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-3][0-9]|14[0-4])$" + - enum: [ qdsd_clk, qdsd_cmd, qdsd_data0, qdsd_data1, qdsd_data2, + qdsd_data3, sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk, + sdc2_clk, sdc2_cmd, sdc2_data ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ gpio, blsp_uart1, blsp_spi1, smb_int, blsp_i2c1, blsp_spi2, + blsp_uart2, blsp_i2c2, gcc_gp1_clk_b, blsp_spi3, + qdss_tracedata_b, blsp_i2c3, gcc_gp2_clk_b, gcc_gp3_clk_b, + blsp_spi4, cap_int, blsp_i2c4, blsp_spi5, blsp_uart5, + qdss_traceclk_a, m_voc, blsp_i2c5, qdss_tracectl_a, + qdss_tracedata_a, blsp_spi6, blsp_uart6, qdss_tracectl_b, + blsp_i2c6, qdss_traceclk_b, mdp_vsync, pri_mi2s_mclk_a, + sec_mi2s_mclk_a, cam_mclk, cci0_i2c, cci1_i2c, blsp1_spi, + blsp3_spi, gcc_gp1_clk_a, gcc_gp2_clk_a, gcc_gp3_clk_a, + uim_batt, sd_write, uim1_data, uim1_clk, uim1_reset, + uim1_present, uim2_data, uim2_clk, uim2_reset, uim2_present, + ts_xvdd, mipi_dsi0, us_euro, ts_resout, ts_sample, + sec_mi2s_mclk_b, pri_mi2s, codec_reset, cdc_pdm0, us_emitter, + pri_mi2s_mclk_b, pri_mi2s_mclk_c, lpass_slimbus, + lpass_slimbus0, lpass_slimbus1, codec_int1, codec_int2, + wcss_bt, sdc3, wcss_wlan2, wcss_wlan1, wcss_wlan0, wcss_wlan, + wcss_fm, key_volp, key_snapshot, key_focus, key_home, pwr_down, + dmic0_clk, hdmi_int, dmic0_data, wsa_vi, wsa_en, blsp_spi8, + wsa_irq, blsp_i2c8, pa_indicator, modem_tsync, ssbi_wtr1, + gsm1_tx, gsm0_tx, sdcard_det, sec_mi2s, ss_switch ] + + bias-pull-down: true + bias-pull-up: true + bias-disable: true + drive-strength: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + + additionalProperties: false + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + tlmm: pinctrl@1000000 { + compatible = "qcom,msm8976-pinctrl"; + reg = <0x1000000 0x300000>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&tlmm 0 0 145>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + + blsp1-uart2-active-state { + pins = "gpio4", "gpio5", "gpio6", "gpio7"; + function = "blsp_uart2"; + drive-strength = <2>; + bias-disable; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.txt deleted file mode 100644 index da52df6273bc43..00000000000000 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.txt +++ /dev/null @@ -1,186 +0,0 @@ -Qualcomm MSM8994 TLMM block - -This binding describes the Top Level Mode Multiplexer block found in the -MSM8994 platform. - -- compatible: - Usage: required - Value type: <string> - Definition: Should contain one of: - "qcom,msm8992-pinctrl", - "qcom,msm8994-pinctrl". - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: the base address and size of the TLMM register space. - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: should specify the TLMM summary IRQ. - -- interrupt-controller: - Usage: required - Value type: <none> - Definition: identifies this node as an interrupt controller - -- #interrupt-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/interrupt-controller/irq.h> - -- gpio-controller: - Usage: required - Value type: <none> - Definition: identifies this node as a gpio controller - -- #gpio-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/gpio/gpio.h> - -- gpio-ranges: - Usage: required - Definition: see ../gpio/gpio.txt - -- gpio-reserved-ranges: - Usage: optional - Definition: see ../gpio/gpio.txt - -Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for -a general description of GPIO and interrupt bindings. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -The pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those pin(s)/group(s), and various pin configuration -parameters, such as pull-up, drive strength, etc. - - -PIN CONFIGURATION NODES: - -The name of each subnode is not important; all subnodes should be enumerated -and processed purely based on their content. - -Each subnode only affects those parameters that are explicitly listed. In -other words, a subnode that lists a mux function but no pin configuration -parameters implies no information about any pin configuration parameters. -Similarly, a pin subnode that describes a pullup parameter implies no -information about e.g. the mux function. - - -The following generic properties as defined in pinctrl-bindings.txt are valid -to specify in a pin configuration subnode: - -- pins: - Usage: required - Value type: <string-array> - Definition: List of gpio pins affected by the properties specified in - this subnode. - - Valid pins are: - gpio0-gpio145 - Supports mux, bias and drive-strength - - sdc1_clk, sdc1_cmd, sdc1_data sdc1_rclk, sdc2_clk, - sdc2_cmd, sdc2_data - Supports bias and drive-strength - -- function: - Usage: required - Value type: <string> - Definition: Specify the alternative function to be configured for the - specified pins. Functions are only valid for gpio pins. - Valid values are: - - audio_ref_clk, blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4, blsp_i2c5, - blsp_i2c6, blsp_i2c7, blsp_i2c8, blsp_i2c9, blsp_i2c10, blsp_i2c11, - blsp_i2c12, blsp_spi1, blsp_spi1_cs1, blsp_spi1_cs2, blsp_spi1_cs3, - blsp_spi2, blsp_spi2_cs1, blsp_spi2_cs2, blsp_spi2_cs3, blsp_spi3, - blsp_spi4, blsp_spi5, blsp_spi6, blsp_spi7, blsp_spi8, blsp_spi9, - blsp_spi10, blsp_spi10_cs1, blsp_spi10_cs2, blsp_spi10_cs3, blsp_spi11, - blsp_spi12, blsp_uart1, blsp_uart2, blsp_uart3, blsp_uart4, blsp_uart5, - blsp_uart6, blsp_uart7, blsp_uart8, blsp_uart9, blsp_uart10, blsp_uart11, - blsp_uart12, blsp_uim1, blsp_uim2, blsp_uim3, blsp_uim4, blsp_uim5, - blsp_uim6, blsp_uim7, blsp_uim8, blsp_uim9, blsp_uim10, blsp_uim11, - blsp_uim12, blsp11_i2c_scl_b, blsp11_i2c_sda_b, blsp11_uart_rx_b, - blsp11_uart_tx_b, cam_mclk0, cam_mclk1, cam_mclk2, cam_mclk3, - cci_async_in0, cci_async_in1, cci_async_in2, cci_i2c0, cci_i2c1, - cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, - gcc_gp1_clk_a, gcc_gp1_clk_b, gcc_gp2_clk_a, gcc_gp2_clk_b, gcc_gp3_clk_a, - gcc_gp3_clk_b, gp_mn, gp_pdm0, gp_pdm1, gp_pdm2, gp0_clk, - gp1_clk, gps_tx, gsm_tx, hdmi_cec, hdmi_ddc, hdmi_hpd, hdmi_rcv, - mdp_vsync, mss_lte, nav_pps, nav_tsync, qdss_cti_trig_in_a, - qdss_cti_trig_in_b, qdss_cti_trig_in_c, qdss_cti_trig_in_d, - qdss_cti_trig_out_a, qdss_cti_trig_out_b, qdss_cti_trig_out_c, - qdss_cti_trig_out_d, qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a, - qdss_tracectl_b, qdss_tracedata_a, qdss_tracedata_b, qua_mi2s, pci_e0, - pci_e1, pri_mi2s, sdc4, sec_mi2s, slimbus, spkr_i2s, ter_mi2s, tsif1, - tsif2, uim_batt_alarm, uim1, uim2, uim3, uim4, gpio - -- bias-disable: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as no pull. - -- bias-pull-down: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull down. - -- bias-pull-up: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull up. - -- output-high: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - high. - Not valid for sdc pins. - -- output-low: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - low. - Not valid for sdc pins. - -- drive-strength: - Usage: optional - Value type: <u32> - Definition: Selects the drive strength for the specified pins, in mA. - Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 - -Example: - - msmgpio: pinctrl@fd510000 { - compatible = "qcom,msm8994-pinctrl"; - reg = <0xfd510000 0x4000>; - interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&msmgpio 0 0 146>; - interrupt-controller; - #interrupt-cells = <2>; - - blsp1_uart2_default: blsp1_uart2_default { - pinmux { - pins = "gpio4", "gpio5"; - function = "blsp_uart2"; - }; - pinconf { - pins = "gpio4", "gpio5"; - drive-strength = <16>; - bias-disable; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.yaml new file mode 100644 index 00000000000000..55d5439c6c2494 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.yaml @@ -0,0 +1,162 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,msm8994-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm MSM8994 TLMM pin controller + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm MSM8994 SoC. + +properties: + compatible: + enum: + - qcom,msm8992-pinctrl + - qcom,msm8994-pinctrl + + reg: + maxItems: 1 + + interrupts: true + interrupt-controller: true + "#interrupt-cells": true + gpio-controller: true + "#gpio-cells": true + gpio-ranges: true + wakeup-parent: true + + gpio-reserved-ranges: + minItems: 1 + maxItems: 75 + + gpio-line-names: + maxItems: 150 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-msm8994-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-msm8994-tlmm-state" + additionalProperties: false + +$defs: + qcom-msm8994-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9])$" + - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk, sdc2_clk, + sdc2_cmd, sdc2_data, sdc3_clk, sdc3_cmd, sdc3_data ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ gpio, audio_ref_clk, blsp_i2c1, blsp_i2c2, blsp_i2c3, + blsp_i2c4, blsp_i2c5, blsp_i2c6, blsp_i2c7, blsp_i2c8, + blsp_i2c9, blsp_i2c10, blsp_i2c11, blsp_i2c12, blsp_spi1, + blsp_spi1_cs1, blsp_spi1_cs2, blsp_spi1_cs3, blsp_spi2, + blsp_spi2_cs1, blsp_spi2_cs2, blsp_spi2_cs3, blsp_spi3, + blsp_spi4, blsp_spi5, blsp_spi6, blsp_spi7, blsp_spi8, + blsp_spi9, blsp_spi10, blsp_spi10_cs1, blsp_spi10_cs2, + blsp_spi10_cs3, blsp_spi11, blsp_spi12, blsp_uart1, blsp_uart2, + blsp_uart3, blsp_uart4, blsp_uart5, blsp_uart6, blsp_uart7, + blsp_uart8, blsp_uart9, blsp_uart10, blsp_uart11, blsp_uart12, + blsp_uim1, blsp_uim2, blsp_uim3, blsp_uim4, blsp_uim5, + blsp_uim6, blsp_uim7, blsp_uim8, blsp_uim9, blsp_uim10, + blsp_uim11, blsp_uim12, blsp11_i2c_scl_b, blsp11_i2c_sda_b, + blsp11_uart_rx_b, blsp11_uart_tx_b, cam_mclk0, cam_mclk1, + cam_mclk2, cam_mclk3, cci_async_in0, cci_async_in1, + cci_async_in2, cci_i2c0, cci_i2c1, cci_timer0, cci_timer1, + cci_timer2, cci_timer3, cci_timer4, gcc_gp1_clk_a, + gcc_gp1_clk_b, gcc_gp2_clk_a, gcc_gp2_clk_b, gcc_gp3_clk_a, + gcc_gp3_clk_b, gp_mn, gp_pdm0, gp_pdm1, gp_pdm2, gp0_clk, + gp1_clk, gps_tx, gsm_tx, hdmi_cec, hdmi_ddc, hdmi_hpd, + hdmi_rcv, mdp_vsync, mss_lte, nav_pps, nav_tsync, + qdss_cti_trig_in_a, qdss_cti_trig_in_b, qdss_cti_trig_in_c, + qdss_cti_trig_in_d, qdss_cti_trig_out_a, qdss_cti_trig_out_b, + qdss_cti_trig_out_c, qdss_cti_trig_out_d, qdss_traceclk_a, + qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b, + qdss_tracedata_a, qdss_tracedata_b, qua_mi2s, pci_e0, pci_e1, + pri_mi2s, sdc4, sec_mi2s, slimbus, spkr_i2s, ter_mi2s, tsif1, + tsif2, uim_batt_alarm, uim1, uim2, uim3, uim4 ] + + bias-pull-down: true + bias-pull-up: true + bias-disable: true + drive-strength: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + + additionalProperties: false + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + tlmm: pinctrl@fd510000 { + compatible = "qcom,msm8994-pinctrl"; + reg = <0xfd510000 0x4000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + gpio-ranges = <&tlmm 0 0 146>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + blsp1-uart2-default-state { + function = "blsp_uart2"; + pins = "gpio4", "gpio5"; + drive-strength = <16>; + bias-disable; + }; + + blsp1-spi1-default-state { + default-pins { + pins = "gpio0", "gpio1", "gpio3"; + function = "blsp_spi1"; + drive-strength = <10>; + bias-pull-down; + }; + + cs-pins { + pins = "gpio8"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.txt deleted file mode 100644 index a56cb882830cc1..00000000000000 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.txt +++ /dev/null @@ -1,208 +0,0 @@ -Qualcomm MSM8996 TLMM block - -This binding describes the Top Level Mode Multiplexer block found in the -MSM8996 platform. - -- compatible: - Usage: required - Value type: <string> - Definition: must be "qcom,msm8996-pinctrl" - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: the base address and size of the TLMM register space. - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: should specify the TLMM summary IRQ. - -- interrupt-controller: - Usage: required - Value type: <none> - Definition: identifies this node as an interrupt controller - -- #interrupt-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/interrupt-controller/irq.h> - -- gpio-controller: - Usage: required - Value type: <none> - Definition: identifies this node as a gpio controller - -- #gpio-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/gpio/gpio.h> - -- gpio-ranges: - Usage: required - Definition: see ../gpio/gpio.txt - -- gpio-reserved-ranges: - Usage: optional - Definition: see ../gpio/gpio.txt - -Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for -a general description of GPIO and interrupt bindings. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -The pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those pin(s)/group(s), and various pin configuration -parameters, such as pull-up, drive strength, etc. - - -PIN CONFIGURATION NODES: - -The name of each subnode is not important; all subnodes should be enumerated -and processed purely based on their content. - -Each subnode only affects those parameters that are explicitly listed. In -other words, a subnode that lists a mux function but no pin configuration -parameters implies no information about any pin configuration parameters. -Similarly, a pin subnode that describes a pullup parameter implies no -information about e.g. the mux function. - - -The following generic properties as defined in pinctrl-bindings.txt are valid -to specify in a pin configuration subnode: - -- pins: - Usage: required - Value type: <string-array> - Definition: List of gpio pins affected by the properties specified in - this subnode. - - Valid pins are: - gpio0-gpio149 - Supports mux, bias and drive-strength - - sdc1_clk, sdc1_cmd, sdc1_data sdc2_clk, sdc2_cmd, - sdc2_data sdc1_rclk - Supports bias and drive-strength - -- function: - Usage: required - Value type: <string> - Definition: Specify the alternative function to be configured for the - specified pins. Functions are only valid for gpio pins. - Valid values are: - - blsp_uart1, blsp_spi1, blsp_i2c1, blsp_uim1, atest_tsens, - bimc_dte1, dac_calib0, blsp_spi8, blsp_uart8, blsp_uim8, - qdss_cti_trig_out_b, bimc_dte0, dac_calib1, qdss_cti_trig_in_b, - dac_calib2, atest_tsens2, atest_usb1, blsp_spi10, blsp_uart10, - blsp_uim10, atest_bbrx1, atest_usb13, atest_bbrx0, atest_usb12, - mdp_vsync, edp_lcd, blsp_i2c10, atest_gpsadc1, atest_usb11, - atest_gpsadc0, edp_hot, atest_usb10, m_voc, dac_gpio, atest_char, - cam_mclk, pll_bypassnl, qdss_stm7, blsp_i2c8, qdss_tracedata_b, - pll_reset, qdss_stm6, qdss_stm5, qdss_stm4, atest_usb2, cci_i2c, - qdss_stm3, dac_calib3, atest_usb23, atest_char3, dac_calib4, - qdss_stm2, atest_usb22, atest_char2, qdss_stm1, dac_calib5, - atest_usb21, atest_char1, dbg_out, qdss_stm0, dac_calib6, - atest_usb20, atest_char0, dac_calib10, qdss_stm10, - qdss_cti_trig_in_a, cci_timer4, blsp_spi6, blsp_uart6, blsp_uim6, - blsp2_spi, qdss_stm9, qdss_cti_trig_out_a, dac_calib11, - qdss_stm8, cci_timer0, qdss_stm13, dac_calib7, cci_timer1, - qdss_stm12, dac_calib8, cci_timer2, blsp1_spi, qdss_stm11, - dac_calib9, cci_timer3, cci_async, dac_calib12, blsp_i2c6, - qdss_tracectl_a, dac_calib13, qdss_traceclk_a, dac_calib14, - dac_calib15, hdmi_rcv, dac_calib16, hdmi_cec, pwr_modem, - dac_calib17, hdmi_ddc, pwr_nav, dac_calib18, pwr_crypto, - dac_calib19, hdmi_hot, dac_calib20, dac_calib21, pci_e0, - dac_calib22, dac_calib23, dac_calib24, tsif1_sync, dac_calib25, - sd_write, tsif1_error, blsp_spi2, blsp_uart2, blsp_uim2, - qdss_cti, blsp_i2c2, blsp_spi3, blsp_uart3, blsp_uim3, blsp_i2c3, - uim3, blsp_spi9, blsp_uart9, blsp_uim9, blsp10_spi, blsp_i2c9, - blsp_spi7, blsp_uart7, blsp_uim7, qdss_tracedata_a, blsp_i2c7, - qua_mi2s, gcc_gp1_clk_a, ssc_irq, uim4, blsp_spi11, blsp_uart11, - blsp_uim11, gcc_gp2_clk_a, gcc_gp3_clk_a, blsp_i2c11, cri_trng0, - cri_trng1, cri_trng, qdss_stm18, pri_mi2s, qdss_stm17, blsp_spi4, - blsp_uart4, blsp_uim4, qdss_stm16, qdss_stm15, blsp_i2c4, - qdss_stm14, dac_calib26, spkr_i2s, audio_ref, lpass_slimbus, - isense_dbg, tsense_pwm1, tsense_pwm2, btfm_slimbus, ter_mi2s, - qdss_stm22, qdss_stm21, qdss_stm20, qdss_stm19, gcc_gp1_clk_b, - sec_mi2s, blsp_spi5, blsp_uart5, blsp_uim5, gcc_gp2_clk_b, - gcc_gp3_clk_b, blsp_i2c5, blsp_spi12, blsp_uart12, blsp_uim12, - qdss_stm25, qdss_stm31, blsp_i2c12, qdss_stm30, qdss_stm29, - tsif1_clk, qdss_stm28, tsif1_en, tsif1_data, sdc4_cmd, qdss_stm27, - qdss_traceclk_b, tsif2_error, sdc43, vfr_1, qdss_stm26, tsif2_clk, - sdc4_clk, qdss_stm24, tsif2_en, sdc42, qdss_stm23, qdss_tracectl_b, - sd_card, tsif2_data, sdc41, tsif2_sync, sdc40, mdp_vsync_p_b, - ldo_en, mdp_vsync_s_b, ldo_update, blsp11_uart_tx_b, blsp11_uart_rx_b, - blsp11_i2c_sda_b, prng_rosc, blsp11_i2c_scl_b, uim2, uim1, uim_batt, - pci_e2, pa_indicator, adsp_ext, ddr_bist, qdss_tracedata_11, - qdss_tracedata_12, modem_tsync, nav_dr, nav_pps, pci_e1, gsm_tx, - qspi_cs, ssbi2, ssbi1, mss_lte, qspi_clk, qspi0, qspi1, qspi2, qspi3, - gpio - -- bias-disable: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as no pull. - -- bias-pull-down: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull down. - -- bias-pull-up: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull up. - -- output-high: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - high. - Not valid for sdc pins. - -- output-low: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - low. - Not valid for sdc pins. - -- drive-strength: - Usage: optional - Value type: <u32> - Definition: Selects the drive strength for the specified pins, in mA. - Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 - -Example: - - tlmm: pinctrl@1010000 { - compatible = "qcom,msm8996-pinctrl"; - reg = <0x01010000 0x300000>; - interrupts = <0 208 0>; - gpio-controller; - gpio-ranges = <&tlmm 0 0 150>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - - uart_console_active: uart_console_active { - mux { - pins = "gpio4", "gpio5"; - function = "blsp_uart8"; - }; - - config { - pins = "gpio4", "gpio5"; - drive-strength = <2>; - bias-disable; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.yaml new file mode 100644 index 00000000000000..8e1cd4ba11164a --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.yaml @@ -0,0 +1,182 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,msm8996-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm MSM8996 TLMM pin controller + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm MSM8996 SoC. + +properties: + compatible: + const: qcom,msm8996-pinctrl + + reg: + maxItems: 1 + + interrupts: true + interrupt-controller: true + "#interrupt-cells": true + gpio-controller: true + "#gpio-cells": true + gpio-ranges: true + wakeup-parent: true + + gpio-reserved-ranges: + minItems: 1 + maxItems: 75 + + gpio-line-names: + maxItems: 150 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-msm8996-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-msm8996-tlmm-state" + additionalProperties: false + +$defs: + qcom-msm8996-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9])$" + - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk, sdc2_clk, + sdc2_cmd, sdc2_data ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ gpio, blsp_uart1, blsp_spi1, blsp_i2c1, blsp_uim1, atest_tsens, + bimc_dte1, dac_calib0, blsp_spi8, blsp_uart8, blsp_uim8, + qdss_cti_trig_out_b, bimc_dte0, dac_calib1, qdss_cti_trig_in_b, + dac_calib2, atest_tsens2, atest_usb1, blsp_spi10, blsp_uart10, + blsp_uim10, atest_bbrx1, atest_usb13, atest_bbrx0, atest_usb12, + mdp_vsync, edp_lcd, blsp_i2c10, atest_gpsadc1, atest_usb11, + atest_gpsadc0, edp_hot, atest_usb10, m_voc, dac_gpio, + atest_char, cam_mclk, pll_bypassnl, qdss_stm7, blsp_i2c8, + qdss_tracedata_b, pll_reset, qdss_stm6, qdss_stm5, qdss_stm4, + atest_usb2, cci_i2c, qdss_stm3, dac_calib3, atest_usb23, + atest_char3, dac_calib4, qdss_stm2, atest_usb22, atest_char2, + qdss_stm1, dac_calib5, atest_usb21, atest_char1, dbg_out, + qdss_stm0, dac_calib6, atest_usb20, atest_char0, dac_calib10, + qdss_stm10, qdss_cti_trig_in_a, cci_timer4, blsp_spi6, + blsp_uart6, blsp_uim6, blsp2_spi, qdss_stm9, + qdss_cti_trig_out_a, dac_calib11, qdss_stm8, cci_timer0, + qdss_stm13, dac_calib7, cci_timer1, qdss_stm12, dac_calib8, + cci_timer2, blsp1_spi, qdss_stm11, dac_calib9, cci_timer3, + cci_async, dac_calib12, blsp_i2c6, qdss_tracectl_a, + dac_calib13, qdss_traceclk_a, dac_calib14, dac_calib15, + hdmi_rcv, dac_calib16, hdmi_cec, pwr_modem, dac_calib17, + hdmi_ddc, pwr_nav, dac_calib18, pwr_crypto, dac_calib19, + hdmi_hot, dac_calib20, dac_calib21, pci_e0, dac_calib22, + dac_calib23, dac_calib24, tsif1_sync, dac_calib25, sd_write, + tsif1_error, blsp_spi2, blsp_uart2, blsp_uim2, qdss_cti, + blsp_i2c2, blsp_spi3, blsp_uart3, blsp_uim3, blsp_i2c3, uim3, + blsp_spi9, blsp_uart9, blsp_uim9, blsp10_spi, blsp_i2c9, + blsp_spi7, blsp_uart7, blsp_uim7, qdss_tracedata_a, blsp_i2c7, + qua_mi2s, gcc_gp1_clk_a, ssc_irq, uim4, blsp_spi11, + blsp_uart11, blsp_uim11, gcc_gp2_clk_a, gcc_gp3_clk_a, + blsp_i2c11, cri_trng0, cri_trng1, cri_trng, qdss_stm18, + pri_mi2s, qdss_stm17, blsp_spi4, blsp_uart4, blsp_uim4, + qdss_stm16, qdss_stm15, blsp_i2c4, qdss_stm14, dac_calib26, + spkr_i2s, audio_ref, lpass_slimbus, isense_dbg, tsense_pwm1, + tsense_pwm2, btfm_slimbus, ter_mi2s, qdss_stm22, qdss_stm21, + qdss_stm20, qdss_stm19, gcc_gp1_clk_b, sec_mi2s, blsp_spi5, + blsp_uart5, blsp_uim5, gcc_gp2_clk_b, gcc_gp3_clk_b, blsp_i2c5, + blsp_spi12, blsp_uart12, blsp_uim12, qdss_stm25, qdss_stm31, + blsp_i2c12, qdss_stm30, qdss_stm29, tsif1_clk, qdss_stm28, + tsif1_en, tsif1_data, sdc4_cmd, qdss_stm27, qdss_traceclk_b, + tsif2_error, sdc43, vfr_1, qdss_stm26, tsif2_clk, sdc4_clk, + qdss_stm24, tsif2_en, sdc42, qdss_stm23, qdss_tracectl_b, + sd_card, tsif2_data, sdc41, tsif2_sync, sdc40, mdp_vsync_p_b, + ldo_en, mdp_vsync_s_b, ldo_update, blsp11_uart_tx_b, + blsp11_uart_rx_b, blsp11_i2c_sda_b, prng_rosc, + blsp11_i2c_scl_b, uim2, uim1, uim_batt, pci_e2, pa_indicator, + adsp_ext, ddr_bist, qdss_tracedata_11, qdss_tracedata_12, + modem_tsync, nav_dr, nav_pps, pci_e1, gsm_tx, qspi_cs, ssbi2, + ssbi1, mss_lte, qspi_clk, qspi0, qspi1, qspi2, qspi3 ] + + bias-pull-down: true + bias-pull-up: true + bias-disable: true + drive-strength: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + + additionalProperties: false + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + tlmm: pinctrl@1010000 { + compatible = "qcom,msm8996-pinctrl"; + reg = <0x01010000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + gpio-ranges = <&tlmm 0 0 150>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + blsp1-spi1-default-state { + spi-pins { + pins = "gpio0", "gpio1", "gpio3"; + function = "blsp_spi1"; + drive-strength = <12>; + bias-disable; + }; + + cs-pins { + pins = "gpio2"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + blsp1-spi1-sleep-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.txt deleted file mode 100644 index c4de930f24067f..00000000000000 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.txt +++ /dev/null @@ -1,202 +0,0 @@ -Qualcomm MSM8998 TLMM block - -This binding describes the Top Level Mode Multiplexer block found in the -MSM8998 platform. - -- compatible: - Usage: required - Value type: <string> - Definition: must be "qcom,msm8998-pinctrl" - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: the base address and size of the TLMM register space. - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: should specify the TLMM summary IRQ. - -- interrupt-controller: - Usage: required - Value type: <none> - Definition: identifies this node as an interrupt controller - -- #interrupt-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/interrupt-controller/irq.h> - -- gpio-controller: - Usage: required - Value type: <none> - Definition: identifies this node as a gpio controller - -- #gpio-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/gpio/gpio.h> - -- gpio-ranges: - Usage: required - Definition: see ../gpio/gpio.txt - -- gpio-reserved-ranges: - Usage: optional - Definition: see ../gpio/gpio.txt - -Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for -a general description of GPIO and interrupt bindings. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -The pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those pin(s)/group(s), and various pin configuration -parameters, such as pull-up, drive strength, etc. - - -PIN CONFIGURATION NODES: - -The name of each subnode is not important; all subnodes should be enumerated -and processed purely based on their content. - -Each subnode only affects those parameters that are explicitly listed. In -other words, a subnode that lists a mux function but no pin configuration -parameters implies no information about any pin configuration parameters. -Similarly, a pin subnode that describes a pullup parameter implies no -information about e.g. the mux function. - - -The following generic properties as defined in pinctrl-bindings.txt are valid -to specify in a pin configuration subnode: - -- pins: - Usage: required - Value type: <string-array> - Definition: List of gpio pins affected by the properties specified in - this subnode. - - Valid pins are: - gpio0-gpio149 - Supports mux, bias and drive-strength - - sdc2_clk, sdc2_cmd, sdc2_data - Supports bias and drive-strength - - ufs_reset - Supports bias and drive-strength - -- function: - Usage: required - Value type: <string> - Definition: Specify the alternative function to be configured for the - specified pins. Functions are only valid for gpio pins. - Valid values are: - - gpio, adsp_ext, agera_pll, atest_char, atest_gpsadc0, - atest_gpsadc1, atest_tsens, atest_tsens2, atest_usb1, - atest_usb10, atest_usb11, atest_usb12, atest_usb13, - audio_ref, bimc_dte0, bimc_dte1, blsp10_spi, blsp10_spi_a, - blsp10_spi_b, blsp11_i2c, blsp1_spi, blsp1_spi_a, - blsp1_spi_b, blsp2_spi, blsp9_spi, blsp_i2c1, blsp_i2c2, - blsp_i2c3, blsp_i2c4, blsp_i2c5, blsp_i2c6, blsp_i2c7, - blsp_i2c8, blsp_i2c9, blsp_i2c10, blsp_i2c11, blsp_i2c12, - blsp_spi1, blsp_spi2, blsp_spi3, blsp_spi4, blsp_spi5, - blsp_spi6, blsp_spi7, blsp_spi8, blsp_spi9, blsp_spi10, - blsp_spi11, blsp_spi12, blsp_uart1_a, blsp_uart1_b, - blsp_uart2_a, blsp_uart2_b, blsp_uart3_a, blsp_uart3_b, - blsp_uart7_a, blsp_uart7_b, blsp_uart8, blsp_uart8_a, - blsp_uart8_b, blsp_uart9_a, blsp_uart9_b, blsp_uim1_a, - blsp_uim1_b, blsp_uim2_a, blsp_uim2_b, blsp_uim3_a, - blsp_uim3_b, blsp_uim7_a, blsp_uim7_b, blsp_uim8_a, - blsp_uim8_b, blsp_uim9_a, blsp_uim9_b, bt_reset, - btfm_slimbus, cam_mclk, cci_async, cci_i2c, cci_timer0, - cci_timer1, cci_timer2, cci_timer3, cci_timer4, cri_trng, - cri_trng0, cri_trng1, dbg_out, ddr_bist, edp_hot, edp_lcd, - gcc_gp1_a, gcc_gp1_b, gcc_gp2_a, gcc_gp2_b, gcc_gp3_a, - gcc_gp3_b, hdmi_cec, hdmi_ddc, hdmi_hot, hdmi_rcv, - isense_dbg, jitter_bist, ldo_en, ldo_update, lpass_slimbus, - m_voc, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2, - mdp_vsync3, mdp_vsync_a, mdp_vsync_b, modem_tsync, mss_lte, - nav_dr, nav_pps, pa_indicator, pci_e0, phase_flag, - pll_bypassnl, pll_reset, pri_mi2s, pri_mi2s_ws, prng_rosc, - pwr_crypto, pwr_modem, pwr_nav, qdss_cti0_a, qdss_cti0_b, - qdss_cti1_a, qdss_cti1_b, qdss, qlink_enable, - qlink_request, qua_mi2s, sd_card, sd_write, sdc40, sdc41, - sdc42, sdc43, sdc4_clk, sdc4_cmd, sec_mi2s, sp_cmu, - spkr_i2s, ssbi1, ssc_irq, ter_mi2s, tgu_ch0, tgu_ch1, - tsense_pwm1, tsense_pwm2, tsif0, tsif1, - uim1_clk, uim1_data, uim1_present, - uim1_reset, uim2_clk, uim2_data, uim2_present, uim2_reset, - uim_batt, usb_phy, vfr_1, vsense_clkout, vsense_data0, - vsense_data1, vsense_mode, wlan1_adc0, wlan1_adc1, - wlan2_adc0, wlan2_adc1, - -- bias-disable: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as no pull. - -- bias-pull-down: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull down. - -- bias-pull-up: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull up. - -- output-high: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - high. - Not valid for sdc pins. - -- output-low: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - low. - Not valid for sdc pins. - -- drive-strength: - Usage: optional - Value type: <u32> - Definition: Selects the drive strength for the specified pins, in mA. - Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 - -Example: - - tlmm: pinctrl@03400000 { - compatible = "qcom,msm8998-pinctrl"; - reg = <0x03400000 0xc00000>; - interrupts = <0 208 0>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&tlmm 0 0 175>; - gpio-reserved-ranges = <0 4>, <81 4>; - interrupt-controller; - #interrupt-cells = <2>; - - uart_console_active: uart_console_active { - mux { - pins = "gpio4", "gpio5"; - function = "blsp_uart8_a"; - }; - - config { - pins = "gpio4", "gpio5"; - drive-strength = <2>; - bias-disable; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.yaml new file mode 100644 index 00000000000000..21ba32cc204aae --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.yaml @@ -0,0 +1,171 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,msm8998-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm MSM8998 TLMM pin controller + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm MSM8998 SoC. + +properties: + compatible: + const: qcom,msm8998-pinctrl + + reg: + maxItems: 1 + + interrupts: true + interrupt-controller: true + "#interrupt-cells": true + gpio-controller: true + "#gpio-cells": true + gpio-ranges: true + wakeup-parent: true + + gpio-reserved-ranges: + minItems: 1 + maxItems: 75 + + gpio-line-names: + maxItems: 150 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-msm8998-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-msm8998-tlmm-state" + additionalProperties: false + +$defs: + qcom-msm8998-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9])$" + - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ gpio, adsp_ext, agera_pll, atest_char, atest_gpsadc0, + atest_gpsadc1, atest_tsens, atest_tsens2, atest_usb1, + atest_usb10, atest_usb11, atest_usb12, atest_usb13, audio_ref, + bimc_dte0, bimc_dte1, blsp10_spi, blsp10_spi_a, blsp10_spi_b, + blsp11_i2c, blsp1_spi, blsp1_spi_a, blsp1_spi_b, blsp2_spi, + blsp9_spi, blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4, + blsp_i2c5, blsp_i2c6, blsp_i2c7, blsp_i2c8, blsp_i2c9, + blsp_i2c10, blsp_i2c11, blsp_i2c12, blsp_spi1, blsp_spi2, + blsp_spi3, blsp_spi4, blsp_spi5, blsp_spi6, blsp_spi7, + blsp_spi8, blsp_spi9, blsp_spi10, blsp_spi11, blsp_spi12, + blsp_uart1_a, blsp_uart1_b, blsp_uart2_a, blsp_uart2_b, + blsp_uart3_a, blsp_uart3_b, blsp_uart7_a, blsp_uart7_b, + blsp_uart8, blsp_uart8_a, blsp_uart8_b, blsp_uart9_a, + blsp_uart9_b, blsp_uim1_a, blsp_uim1_b, blsp_uim2_a, + blsp_uim2_b, blsp_uim3_a, blsp_uim3_b, blsp_uim7_a, + blsp_uim7_b, blsp_uim8_a, blsp_uim8_b, blsp_uim9_a, + blsp_uim9_b, bt_reset, btfm_slimbus, cam_mclk, cci_async, + cci_i2c, cci_timer0, cci_timer1, cci_timer2, cci_timer3, + cci_timer4, cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist, + edp_hot, edp_lcd, gcc_gp1_a, gcc_gp1_b, gcc_gp2_a, gcc_gp2_b, + gcc_gp3_a, gcc_gp3_b, hdmi_cec, hdmi_ddc, hdmi_hot, hdmi_rcv, + isense_dbg, jitter_bist, ldo_en, ldo_update, lpass_slimbus, + m_voc, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2, + mdp_vsync3, mdp_vsync_a, mdp_vsync_b, modem_tsync, mss_lte, + nav_dr, nav_pps, pa_indicator, pci_e0, phase_flag, + pll_bypassnl, pll_reset, pri_mi2s, pri_mi2s_ws, prng_rosc, + pwr_crypto, pwr_modem, pwr_nav, qdss_cti0_a, qdss_cti0_b, + qdss_cti1_a, qdss_cti1_b, qdss, qlink_enable, qlink_request, + qua_mi2s, sd_card, sd_write, sdc40, sdc41, sdc42, sdc43, + sdc4_clk, sdc4_cmd, sec_mi2s, sp_cmu, spkr_i2s, ssbi1, ssc_irq, + ter_mi2s, tgu_ch0, tgu_ch1, tsense_pwm1, tsense_pwm2, tsif0, + tsif1, uim1_clk, uim1_data, uim1_present, uim1_reset, uim2_clk, + uim2_data, uim2_present, uim2_reset, uim_batt, usb_phy, vfr_1, + vsense_clkout, vsense_data0, vsense_data1, vsense_mode, + wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1 ] + + bias-pull-down: true + bias-pull-up: true + bias-disable: true + drive-strength: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + + additionalProperties: false + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + tlmm: pinctrl@3400000 { + compatible = "qcom,msm8998-pinctrl"; + reg = <0x03400000 0xc00000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-ranges = <&tlmm 0 0 150>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-reserved-ranges = <0 4>, <81 4>; + + sdc2-off-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <2>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <2>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + sdc2-cd-state { + pins = "gpio95"; + function = "gpio"; + bias-pull-up; + drive-strength = <2>; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml index df79274d0ec370..72cce38bc1ce68 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml @@ -15,28 +15,29 @@ description: properties: compatible: - items: - - enum: - - qcom,pm8018-mpp - - qcom,pm8019-mpp - - qcom,pm8038-mpp - - qcom,pm8058-mpp - - qcom,pm8226-mpp - - qcom,pm8821-mpp - - qcom,pm8841-mpp - - qcom,pm8916-mpp - - qcom,pm8917-mpp - - qcom,pm8921-mpp - - qcom,pm8941-mpp - - qcom,pm8950-mpp - - qcom,pmi8950-mpp - - qcom,pm8994-mpp - - qcom,pma8084-mpp - - qcom,pmi8994-mpp - - - enum: - - qcom,spmi-mpp - - qcom,ssbi-mpp + oneOf: + - items: + - enum: + - qcom,pm8019-mpp + - qcom,pm8226-mpp + - qcom,pm8841-mpp + - qcom,pm8916-mpp + - qcom,pm8941-mpp + - qcom,pm8950-mpp + - qcom,pmi8950-mpp + - qcom,pm8994-mpp + - qcom,pma8084-mpp + - qcom,pmi8994-mpp + - const: qcom,spmi-mpp + - items: + - enum: + - qcom,pm8018-mpp + - qcom,pm8038-mpp + - qcom,pm8058-mpp + - qcom,pm8821-mpp + - qcom,pm8917-mpp + - qcom,pm8921-mpp + - const: qcom,ssbi-mpp reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-tlmm.yaml index 3f4f1c0360b517..adf64bfaa4ed3f 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-tlmm.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/pinctrl/qcom,qcm2290-pinctrl.yaml# +$id: http://devicetree.org/schemas/pinctrl/qcom,qcm2290-tlmm.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Technologies, Inc. QCM2290 TLMM block @@ -10,8 +10,7 @@ maintainers: - Shawn Guo <shawn.guo@linaro.org> description: - This binding describes the Top Level Mode Multiplexer block found in the - QCM2290 platform. + Top Level Mode Multiplexer pin controller in Qualcomm QCM2290 SoC. properties: compatible: @@ -20,46 +19,30 @@ properties: reg: maxItems: 1 - interrupts: - description: Specifies the TLMM summary IRQ - maxItems: 1 - + interrupts: true interrupt-controller: true - - '#interrupt-cells': - description: - Specifies the PIN numbers and Flags, as defined in defined in - include/dt-bindings/interrupt-controller/irq.h - const: 2 - + "#interrupt-cells": true gpio-controller: true - - '#gpio-cells': - description: Specifying the pin number and flags, as defined in - include/dt-bindings/gpio/gpio.h - const: 2 - - gpio-ranges: - maxItems: 1 - + "#gpio-cells": true + gpio-ranges: true wakeup-parent: true -#PIN CONFIGURATION NODES patternProperties: - '-state$': + "-state$": oneOf: - $ref: "#/$defs/qcom-qcm2290-tlmm-state" - patternProperties: - ".*": + "-pins$": $ref: "#/$defs/qcom-qcm2290-tlmm-state" + additionalProperties: false -'$defs': +$defs: qcom-qcm2290-tlmm-state: type: object description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state" + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state properties: pins: @@ -96,20 +79,11 @@ patternProperties: uim2_data, uim2_present, uim2_reset, usb_phy, vfr_1, vsense_trigger, wlan1_adc0, wlan1_adc1 ] - drive-strength: - enum: [2, 4, 6, 8, 10, 12, 14, 16] - default: 2 - description: - Selects the drive strength for the specified pins, in mA. - bias-pull-down: true - bias-pull-up: true - bias-disable: true - + drive-strength: true output-high: true - output-low: true required: @@ -118,17 +92,11 @@ patternProperties: additionalProperties: false allOf: - - $ref: "pinctrl.yaml#" + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# required: - compatible - reg - - interrupts - - interrupt-controller - - '#interrupt-cells' - - gpio-controller - - '#gpio-cells' - - gpio-ranges additionalProperties: false @@ -146,19 +114,19 @@ examples: gpio-ranges = <&tlmm 0 0 127>; sdc2_on_state: sdc2-on-state { - clk { + clk-pins { pins = "sdc2_clk"; bias-disable; drive-strength = <16>; }; - cmd { + cmd-pins { pins = "sdc2_cmd"; bias-pull-up; drive-strength = <10>; }; - data { + data-pins { pins = "sdc2_data"; bias-pull-up; drive-strength = <10>; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.txt deleted file mode 100644 index a50e7468419563..00000000000000 --- a/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.txt +++ /dev/null @@ -1,199 +0,0 @@ -Qualcomm QCS404 TLMM block - -This binding describes the Top Level Mode Multiplexer block found in the -QCS404 platform. - -- compatible: - Usage: required - Value type: <string> - Definition: must be "qcom,qcs404-pinctrl" - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: the base address and size of the north, south and east TLMM - tiles. - -- reg-names: - Usage: required - Value type: <stringlist> - Defintiion: names for the cells of reg, must contain "north", "south" - and "east". - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: should specify the TLMM summary IRQ. - -- interrupt-controller: - Usage: required - Value type: <none> - Definition: identifies this node as an interrupt controller - -- #interrupt-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/interrupt-controller/irq.h> - -- gpio-controller: - Usage: required - Value type: <none> - Definition: identifies this node as a gpio controller - -- #gpio-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/gpio/gpio.h> - -- gpio-ranges: - Usage: required - Definition: see ../gpio/gpio.txt - -Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for -a general description of GPIO and interrupt bindings. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -The pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those pin(s)/group(s), and various pin configuration -parameters, such as pull-up, drive strength, etc. - - -PIN CONFIGURATION NODES: - -The name of each subnode is not important; all subnodes should be enumerated -and processed purely based on their content. - -Each subnode only affects those parameters that are explicitly listed. In -other words, a subnode that lists a mux function but no pin configuration -parameters implies no information about any pin configuration parameters. -Similarly, a pin subnode that describes a pullup parameter implies no -information about e.g. the mux function. - - -The following generic properties as defined in pinctrl-bindings.txt are valid -to specify in a pin configuration subnode: - -- pins: - Usage: required - Value type: <string-array> - Definition: List of gpio pins affected by the properties specified in - this subnode. - - Valid pins are: - gpio0-gpio119 - Supports mux, bias and drive-strength - - sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, - sdc2_data - Supports bias and drive-strength - - ufs_reset - Supports bias and drive-strength - -- function: - Usage: required - Value type: <string> - Definition: Specify the alternative function to be configured for the - specified pins. Functions are only valid for gpio pins. - Valid values are: - - gpio, hdmi_tx, hdmi_ddc, blsp_uart_tx_a2, blsp_spi2, m_voc, - qdss_cti_trig_in_a0, blsp_uart_rx_a2, qdss_tracectl_a, - blsp_uart2, aud_cdc, blsp_i2c_sda_a2, qdss_tracedata_a, - blsp_i2c_scl_a2, qdss_tracectl_b, qdss_cti_trig_in_b0, - blsp_uart1, blsp_spi_mosi_a1, blsp_spi_miso_a1, - qdss_tracedata_b, blsp_i2c1, blsp_spi_cs_n_a1, gcc_plltest, - blsp_spi_clk_a1, rgb_data0, blsp_uart5, blsp_spi5, - adsp_ext, rgb_data1, prng_rosc, rgb_data2, blsp_i2c5, - gcc_gp1_clk_b, rgb_data3, gcc_gp2_clk_b, blsp_spi0, - blsp_uart0, gcc_gp3_clk_b, blsp_i2c0, qdss_traceclk_b, - pcie_clk, nfc_irq, blsp_spi4, nfc_dwl, audio_ts, rgb_data4, - spi_lcd, blsp_uart_tx_b2, gcc_gp3_clk_a, rgb_data5, - blsp_uart_rx_b2, blsp_i2c_sda_b2, blsp_i2c_scl_b2, - pwm_led11, i2s_3_data0_a, ebi2_lcd, i2s_3_data1_a, - i2s_3_data2_a, atest_char, pwm_led3, i2s_3_data3_a, - pwm_led4, i2s_4, ebi2_a, dsd_clk_b, pwm_led5, pwm_led6, - pwm_led7, pwm_led8, pwm_led24, spkr_dac0, blsp_i2c4, - pwm_led9, pwm_led10, spdifrx_opt, pwm_led12, pwm_led13, - pwm_led14, wlan1_adc1, rgb_data_b0, pwm_led15, - blsp_spi_mosi_b1, wlan1_adc0, rgb_data_b1, pwm_led16, - blsp_spi_miso_b1, qdss_cti_trig_out_b0, wlan2_adc1, - rgb_data_b2, pwm_led17, blsp_spi_cs_n_b1, wlan2_adc0, - rgb_data_b3, pwm_led18, blsp_spi_clk_b1, rgb_data_b4, - pwm_led19, ext_mclk1_b, qdss_traceclk_a, rgb_data_b5, - pwm_led20, atest_char3, i2s_3_sck_b, ldo_update, bimc_dte0, - rgb_hsync, pwm_led21, i2s_3_ws_b, dbg_out, rgb_vsync, - i2s_3_data0_b, ldo_en, hdmi_dtest, rgb_de, i2s_3_data1_b, - hdmi_lbk9, rgb_clk, atest_char1, i2s_3_data2_b, ebi_cdc, - hdmi_lbk8, rgb_mdp, atest_char0, i2s_3_data3_b, hdmi_lbk7, - rgb_data_b6, rgb_data_b7, hdmi_lbk6, rgmii_int, cri_trng1, - rgmii_wol, cri_trng0, gcc_tlmm, rgmii_ck, rgmii_tx, - hdmi_lbk5, hdmi_pixel, hdmi_rcv, hdmi_lbk4, rgmii_ctl, - ext_lpass, rgmii_rx, cri_trng, hdmi_lbk3, hdmi_lbk2, - qdss_cti_trig_out_b1, rgmii_mdio, hdmi_lbk1, rgmii_mdc, - hdmi_lbk0, ir_in, wsa_en, rgb_data6, rgb_data7, - atest_char2, ebi_ch0, blsp_uart3, blsp_spi3, sd_write, - blsp_i2c3, gcc_gp1_clk_a, qdss_cti_trig_in_b1, - gcc_gp2_clk_a, ext_mclk0, mclk_in1, i2s_1, dsd_clk_a, - qdss_cti_trig_in_a1, rgmi_dll1, pwm_led22, pwm_led23, - qdss_cti_trig_out_a0, rgmi_dll2, pwm_led1, - qdss_cti_trig_out_a1, pwm_led2, i2s_2, pll_bist, - ext_mclk1_a, mclk_in2, bimc_dte1, i2s_3_sck_a, i2s_3_ws_a - -- bias-disable: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as no pull. - -- bias-pull-down: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull down. - -- bias-pull-up: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull up. - -- output-high: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - high. - Not valid for sdc pins. - -- output-low: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - low. - Not valid for sdc pins. - -- drive-strength: - Usage: optional - Value type: <u32> - Definition: Selects the drive strength for the specified pins, in mA. - Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 - -Example: - - tlmm: pinctrl@1000000 { - compatible = "qcom,qcs404-pinctrl"; - reg = <0x01000000 0x200000>, - <0x01300000 0x200000>, - <0x07b00000 0x200000>; - reg-names = "south", "north", "east"; - interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&tlmm 0 0 120>; - interrupt-controller; - #interrupt-cells = <2>; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.yaml new file mode 100644 index 00000000000000..29d50c4a0034cd --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.yaml @@ -0,0 +1,176 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,qcs404-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm QCS404 TLMM pin controller + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm QCS404 SoC. + +properties: + compatible: + const: qcom,qcs404-pinctrl + + reg: + maxItems: 3 + + reg-names: + items: + - const: south + - const: north + - const: east + + interrupts: true + interrupt-controller: true + "#interrupt-cells": true + gpio-controller: true + "#gpio-cells": true + gpio-ranges: true + wakeup-parent: true + + gpio-reserved-ranges: + minItems: 1 + maxItems: 60 + + gpio-line-names: + maxItems: 120 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-qcs404-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-qcs404-tlmm-state" + additionalProperties: false + +$defs: + qcom-qcs404-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-1][0-9])$" + - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk, sdc2_clk, + sdc2_cmd, sdc2_data, ufs_reset ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ gpio, adsp_ext, atest_char, atest_char0, atest_char1, + atest_char2, atest_char3, aud_cdc, audio_ts, bimc_dte0, + bimc_dte1, blsp_i2c0, blsp_i2c1, blsp_i2c3, blsp_i2c4, + blsp_i2c5, blsp_i2c_scl_a2, blsp_i2c_scl_b2, blsp_i2c_sda_a2, + blsp_i2c_sda_b2, blsp_spi0, blsp_spi2, blsp_spi3, blsp_spi4, + blsp_spi5, blsp_spi_clk_a1, blsp_spi_clk_b1, blsp_spi_cs_n_a1, + blsp_spi_cs_n_b1, blsp_spi_miso_a1, blsp_spi_miso_b1, + blsp_spi_mosi_a1, blsp_spi_mosi_b1, blsp_uart0, blsp_uart1, + blsp_uart2, blsp_uart3, blsp_uart5, blsp_uart_rx_a2, + blsp_uart_rx_b2, blsp_uart_tx_a2, blsp_uart_tx_b2, cri_trng, + cri_trng0, cri_trng1, dbg_out, dsd_clk_a, dsd_clk_b, ebi2_a, + ebi2_lcd, ebi_cdc, ebi_ch0, ext_lpass, ext_mclk0, ext_mclk1_a, + ext_mclk1_b, gcc_gp1_clk_a, gcc_gp1_clk_b, gcc_gp2_clk_a, + gcc_gp2_clk_b, gcc_gp3_clk_a, gcc_gp3_clk_b, gcc_plltest, + gcc_tlmm, hdmi_ddc, hdmi_dtest, hdmi_lbk0, hdmi_lbk1, + hdmi_lbk2, hdmi_lbk3, hdmi_lbk4, hdmi_lbk5, hdmi_lbk6, + hdmi_lbk7, hdmi_lbk8, hdmi_lbk9, hdmi_pixel, hdmi_rcv, hdmi_tx, + i2s_1, i2s_2, i2s_3_data0_a, i2s_3_data0_b, i2s_3_data1_a, + i2s_3_data1_b, i2s_3_data2_a, i2s_3_data2_b, i2s_3_data3_a, + i2s_3_data3_b, i2s_3_sck_a, i2s_3_sck_b, i2s_3_ws_a, + i2s_3_ws_b, i2s_4, ir_in, ldo_en, ldo_update, mclk_in1, + mclk_in2, m_voc, nfc_dwl, nfc_irq, pcie_clk, pll_bist, + prng_rosc, pwm_led1, pwm_led10, pwm_led11, pwm_led12, + pwm_led13, pwm_led14, pwm_led15, pwm_led16, pwm_led17, + pwm_led18, pwm_led19, pwm_led2, pwm_led20, pwm_led21, + pwm_led22, pwm_led23, pwm_led24, pwm_led3, pwm_led4, pwm_led5, + pwm_led6, pwm_led7, pwm_led8, pwm_led9, qdss_cti_trig_in_a0, + qdss_cti_trig_in_a1, qdss_cti_trig_in_b0, qdss_cti_trig_in_b1, + qdss_cti_trig_out_a0, qdss_cti_trig_out_a1, + qdss_cti_trig_out_b0, qdss_cti_trig_out_b1, qdss_traceclk_a, + qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b, + qdss_tracedata_a, qdss_tracedata_b, rgb_clk, rgb_data0, + rgb_data1, rgb_data2, rgb_data3, rgb_data4, rgb_data5, + rgb_data6, rgb_data7, rgb_data_b0, rgb_data_b1, rgb_data_b2, + rgb_data_b3, rgb_data_b4, rgb_data_b5, rgb_data_b6, + rgb_data_b7, rgb_de, rgb_hsync, rgb_mdp, rgb_vsync, rgmi_dll1, + rgmi_dll2, rgmii_ck, rgmii_ctl, rgmii_int, rgmii_mdc, + rgmii_mdio, rgmii_rx, rgmii_tx, rgmii_wol, sd_write, + spdifrx_opt, spi_lcd, spkr_dac0, wlan1_adc0, wlan1_adc1, + wlan2_adc0, wlan2_adc1, wsa_en ] + + bias-pull-down: true + bias-pull-up: true + bias-disable: true + drive-strength: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + + additionalProperties: false + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + tlmm: pinctrl@1000000 { + compatible = "qcom,qcs404-pinctrl"; + reg = <0x01000000 0x200000>, + <0x01300000 0x200000>, + <0x07b00000 0x200000>; + reg-names = "south", "north", "east"; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-ranges = <&tlmm 0 0 120>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + + blsp1-i2c1-default-state { + pins = "gpio24", "gpio25"; + function = "blsp_i2c1"; + }; + + blsp1-i2c2-default-state { + sda-pins { + pins = "gpio19"; + function = "blsp_i2c_sda_a2"; + }; + + scl-pins { + pins = "gpio20"; + function = "blsp_i2c_scl_a2"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.txt deleted file mode 100644 index 6ffeac9801dfd1..00000000000000 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.txt +++ /dev/null @@ -1,187 +0,0 @@ -Qualcomm Technologies, Inc. SC7180 TLMM block - -This binding describes the Top Level Mode Multiplexer block found in the -SC7180 platform. - -- compatible: - Usage: required - Value type: <string> - Definition: must be "qcom,sc7180-pinctrl" - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: the base address and size of the north, south and west - TLMM tiles - -- reg-names: - Usage: required - Value type: <prop-encoded-array> - Definition: names for the cells of reg, must contain "north", "south" - and "west". - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: should specify the TLMM summary IRQ. - -- interrupt-controller: - Usage: required - Value type: <none> - Definition: identifies this node as an interrupt controller - -- #interrupt-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/interrupt-controller/irq.h> - -- gpio-controller: - Usage: required - Value type: <none> - Definition: identifies this node as a gpio controller - -- #gpio-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/gpio/gpio.h> - -- gpio-ranges: - Usage: required - Value type: <prop-encoded-array> - Definition: see ../gpio/gpio.txt - -- gpio-reserved-ranges: - Usage: optional - Value type: <prop-encoded-array> - Definition: see ../gpio/gpio.txt - -Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for -a general description of GPIO and interrupt bindings. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -The pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those pin(s)/group(s), and various pin configuration -parameters, such as pull-up, drive strength, etc. - - -PIN CONFIGURATION NODES: - -The name of each subnode is not important; all subnodes should be enumerated -and processed purely based on their content. - -Each subnode only affects those parameters that are explicitly listed. In -other words, a subnode that lists a mux function but no pin configuration -parameters implies no information about any pin configuration parameters. -Similarly, a pin subnode that describes a pullup parameter implies no -information about e.g. the mux function. - - -The following generic properties as defined in pinctrl-bindings.txt are valid -to specify in a pin configuration subnode: - -- pins: - Usage: required - Value type: <string-array> - Definition: List of gpio pins affected by the properties specified in - this subnode. - - Valid pins are: - gpio0-gpio118 - Supports mux, bias and drive-strength - - sdc1_clk, sdc1_cmd, sdc1_data sdc2_clk, sdc2_cmd, - sdc2_data sdc1_rclk - Supports bias and drive-strength - - ufs_reset - Supports bias and drive-strength - -- function: - Usage: required - Value type: <string> - Definition: Specify the alternative function to be configured for the - specified pins. Functions are only valid for gpio pins. - Valid values are: - - adsp_ext, agera_pll, aoss_cti, atest_char, atest_char0, - atest_char1, atest_char2, atest_char3, atest_tsens, - atest_tsens2, atest_usb1, atest_usb10, atest_usb11, - atest_usb12, atest_usb13, atest_usb2, atest_usb20, - atest_usb21, atest_usb22, atest_usb23, audio_ref, - btfm_slimbus, cam_mclk, cci_async, cci_i2c, cci_timer0, - cci_timer1, cci_timer2, cci_timer3, cci_timer4, - cri_trng, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1, - ddr_pxi2, ddr_pxi3, dp_hot, edp_lcd, gcc_gp1, gcc_gp2, - gcc_gp3, gpio, gp_pdm0, gp_pdm1, gp_pdm2, gps_tx, - jitter_bist, ldo_en, ldo_update, lpass_ext, mdp_vsync, - mdp_vsync0, mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s_0, - mi2s_1, mi2s_2, mss_lte, m_voc, pa_indicator, phase_flag, - PLL_BIST, pll_bypassnl, pll_reset, prng_rosc, qdss, - qdss_cti, qlink_enable, qlink_request, qspi_clk, qspi_cs, - qspi_data, qup00, qup01, qup02_i2c, qup02_uart, qup03, - qup04_i2c, qup04_uart, qup05, qup10, qup11_i2c, qup11_uart, - qup12, qup13_i2c, qup13_uart, qup14, qup15, sdc1_tb, - sdc2_tb, sd_write, sp_cmu, tgu_ch0, tgu_ch1, tgu_ch2, - tgu_ch3, tsense_pwm1, tsense_pwm2, uim1, uim2, uim_batt, - usb_phy, vfr_1, _V_GPIO, _V_PPS_IN, _V_PPS_OUT, - vsense_trigger, wlan1_adc0, wlan1_adc1, wlan2_adc0, - wlan2_adc1, - -- bias-disable: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as no pull. - -- bias-pull-down: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull down. - -- bias-pull-up: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull up. - -- output-high: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - high. - Not valid for sdc pins. - -- output-low: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - low. - Not valid for sdc pins. - -- drive-strength: - Usage: optional - Value type: <u32> - Definition: Selects the drive strength for the specified pins, in mA. - Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 - -Example: - - tlmm: pinctrl@3500000 { - compatible = "qcom,sc7180-pinctrl"; - reg = <0x3500000 0x300000>, - <0x3900000 0x300000>, - <0x3D00000 0x300000>; - reg-names = "west", "north", "south"; - interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&tlmm 0 0 119>; - gpio-reserved-ranges = <0 4>, <106 4>; - interrupt-controller; - #interrupt-cells = <2>; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml new file mode 100644 index 00000000000000..b40f6dc6adaec3 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml @@ -0,0 +1,158 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sc7180-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SC7180 TLMM pin controller + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm SC7180 SoC. + +properties: + compatible: + const: qcom,sc7180-pinctrl + + reg: + maxItems: 3 + + reg-names: + items: + - const: west + - const: north + - const: south + + interrupts: true + interrupt-controller: true + "#interrupt-cells": true + gpio-controller: true + "#gpio-cells": true + gpio-ranges: true + wakeup-parent: true + + gpio-reserved-ranges: + minItems: 1 + maxItems: 60 + + gpio-line-names: + maxItems: 119 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sc7180-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sc7180-tlmm-state" + additionalProperties: false + +$defs: + qcom-sc7180-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|10[0-9]|11[0-8])$" + - enum: [ sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, + sdc2_cmd, sdc2_data, ufs_reset ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ adsp_ext, agera_pll, aoss_cti, atest_char, atest_char0, + atest_char1, atest_char2, atest_char3, atest_tsens, + atest_tsens2, atest_usb1, atest_usb10, atest_usb11, + atest_usb12, atest_usb13, atest_usb2, atest_usb20, atest_usb21, + atest_usb22, atest_usb23, audio_ref, btfm_slimbus, cam_mclk, + cci_async, cci_i2c, cci_timer0, cci_timer1, cci_timer2, + cci_timer3, cci_timer4, cri_trng, dbg_out, ddr_bist, ddr_pxi0, + ddr_pxi1, ddr_pxi2, ddr_pxi3, dp_hot, edp_lcd, gcc_gp1, + gcc_gp2, gcc_gp3, gpio, gp_pdm0, gp_pdm1, gp_pdm2, gps_tx, + jitter_bist, ldo_en, ldo_update, lpass_ext, mdp_vsync, + mdp_vsync0, mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s_0, mi2s_1, + mi2s_2, mss_lte, m_voc, pa_indicator, phase_flag, PLL_BIST, + pll_bypassnl, pll_reset, prng_rosc, qdss, qdss_cti, + qlink_enable, qlink_request, qspi_clk, qspi_cs, qspi_data, + qup00, qup01, qup02_i2c, qup02_uart, qup03, qup04_i2c, + qup04_uart, qup05, qup10, qup11_i2c, qup11_uart, qup12, + qup13_i2c, qup13_uart, qup14, qup15, sdc1_tb, sdc2_tb, + sd_write, sp_cmu, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, + tsense_pwm1, tsense_pwm2, uim1, uim2, uim_batt, usb_phy, vfr_1, + _V_GPIO, _V_PPS_IN, _V_PPS_OUT, vsense_trigger, wlan1_adc0, + wlan1_adc1, wlan2_adc0, wlan2_adc1 ] + + bias-pull-down: true + bias-pull-up: true + bias-disable: true + drive-strength: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + + additionalProperties: false + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +required: + - compatible + - reg + - reg-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + tlmm: pinctrl@3500000 { + compatible = "qcom,sc7180-pinctrl"; + reg = <0x03500000 0x300000>, + <0x03900000 0x300000>, + <0x03d00000 0x300000>; + reg-names = "west", "north", "south"; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 120>; + wakeup-parent = <&pdc>; + + dp_hot_plug_det: dp-hot-plug-det-state { + pins = "gpio117"; + function = "dp_hot"; + }; + + qup_spi11_cs_gpio: qup-spi11-cs-gpio-state { + spi-pins { + pins = "gpio53", "gpio54", "gpio55"; + function = "qup15"; + }; + + cs-pins { + pins = "gpio56"; + function = "gpio"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml index 624e14f0079004..f7ec8a4f664fe7 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml @@ -4,15 +4,14 @@ $id: http://devicetree.org/schemas/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Qualcomm Technologies, Inc. Low Power Audio SubSystem (LPASS) - Low Power Island (LPI) TLMM block +title: Qualcomm SC7280 SoC LPASS LPI TLMM maintainers: - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> -description: | - This binding describes the Top Level Mode Multiplexer block found in the - LPASS LPI IP on most Qualcomm SoCs +description: + Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem + (LPASS) Low Power Island (LPI) of Qualcomm SC7280 SoC. properties: compatible: @@ -24,12 +23,11 @@ properties: type: boolean reg: - minItems: 2 maxItems: 2 gpio-controller: true - '#gpio-cells': + "#gpio-cells": description: Specifying the pin number and flags, as defined in include/dt-bindings/gpio/gpio.h const: 2 @@ -37,9 +35,17 @@ properties: gpio-ranges: maxItems: 1 -#PIN CONFIGURATION NODES patternProperties: - '-pins$': + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sc7280-lpass-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sc7280-lpass-state" + additionalProperties: false + +$defs: + qcom-sc7280-lpass-state: type: object description: Pinctrl node's client devices use subnodes for desired pin configuration. @@ -83,13 +89,10 @@ patternProperties: 3: Reserved (No adjustments) bias-pull-down: true - bias-pull-up: true - + bias-bus-hold: true bias-disable: true - output-high: true - output-low: true required: @@ -102,7 +105,7 @@ required: - compatible - reg - gpio-controller - - '#gpio-cells' + - "#gpio-cells" - gpio-ranges additionalProperties: false @@ -116,4 +119,21 @@ examples: gpio-controller; #gpio-cells = <2>; gpio-ranges = <&lpass_tlmm 0 0 15>; + + dmic01-state { + dmic01-clk-pins { + pins = "gpio6"; + function = "dmic1_clk"; + }; + + dmic01-clk-sleep-pins { + pins = "gpio6"; + function = "dmic1_clk"; + }; + }; + + tx-swr-data-sleep-state { + pins = "gpio1", "gpio2", "gpio14"; + function = "swr_tx_data"; + }; }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml index ad3496784678b7..36502173cb79ca 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml @@ -9,9 +9,8 @@ title: Qualcomm Technologies, Inc. SC7280 TLMM block maintainers: - Bjorn Andersson <andersson@kernel.org> -description: | - This binding describes the Top Level Mode Multiplexer block found in the - SC7280 platform. +description: + Top Level Mode Multiplexer pin controller in Qualcomm SC7280 SoC. properties: compatible: @@ -43,17 +42,26 @@ properties: maxItems: 1 gpio-line-names: - maxItems: 174 + maxItems: 175 wakeup-parent: true -#PIN CONFIGURATION NODES patternProperties: - '-pins$': + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sc7280-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sc7280-tlmm-state" + additionalProperties: false + +$defs: + qcom-sc7280-tlmm-state: type: object description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state properties: pins: @@ -62,7 +70,7 @@ patternProperties: subnode. items: oneOf: - - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-7][0-9]|18[0-2])$" + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-6][0-9]|17[0-4])$" - enum: [ sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ] minItems: 1 @@ -102,35 +110,18 @@ patternProperties: uim1_clk, uim1_data, uim1_present, uim1_reset, usb2phy_ac, usb_phy, vfr_0, vfr_1, vsense_trigger ] - drive-strength: - enum: [2, 4, 6, 8, 10, 12, 14, 16] - default: 2 - description: - Selects the drive strength for the specified pins, in mA. - bias-pull-down: true - bias-pull-up: true - + bias-bus-hold: true bias-disable: true - + drive-strength: true + input-enable: true output-high: true - output-low: true required: - pins - allOf: - - $ref: /schemas/pinctrl/pincfg-node.yaml - - if: - properties: - pins: - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-7][0-9]|18[0-2])$" - then: - required: - - function - additionalProperties: false allOf: @@ -162,7 +153,7 @@ examples: gpio-ranges = <&tlmm 0 0 175>; wakeup-parent = <&pdc>; - qup_uart5_default: qup-uart5-pins { + qup_uart5_default: qup-uart5-state { pins = "gpio46", "gpio47"; function = "qup13"; drive-strength = <2>; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-tlmm.yaml index b98eeba2c530b4..24191d5f64acdb 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-tlmm.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/pinctrl/qcom,sc8180x-pinctrl.yaml# +$id: http://devicetree.org/schemas/pinctrl/qcom,sc8180x-tlmm.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Technologies, Inc. SC8180X TLMM block @@ -9,12 +9,10 @@ title: Qualcomm Technologies, Inc. SC8180X TLMM block maintainers: - Bjorn Andersson <bjorn.andersson@linaro.org> -description: | - This binding describes the Top Level Mode Multiplexer block found in the - SC8180X platform. +description: + Top Level Mode Multiplexer pin controller in Qualcomm SC8180X SoC. allOf: - - $ref: "pinctrl.yaml#" - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# properties: @@ -26,9 +24,9 @@ properties: reg-names: items: - - const: "west" - - const: "east" - - const: "south" + - const: west + - const: east + - const: south interrupts: true interrupt-controller: true @@ -47,7 +45,7 @@ required: additionalProperties: false patternProperties: - '-state$': + "-state$": oneOf: - $ref: "#/$defs/qcom-sc8180x-tlmm-state" - patternProperties: @@ -55,12 +53,13 @@ patternProperties: $ref: "#/$defs/qcom-sc8180x-tlmm-state" additionalProperties: false -'$defs': +$defs: qcom-sc8180x-tlmm-state: type: object description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state properties: pins: @@ -112,16 +111,6 @@ patternProperties: required: - pins - allOf: - - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state" - - if: - properties: - pins: - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-8][0-9])$" - then: - required: - - function - additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml index 1f468303bb08be..7d2589387e1ae6 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml @@ -4,15 +4,14 @@ $id: http://devicetree.org/schemas/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Qualcomm Technologies, Inc. Low Power Audio SubSystem (LPASS) - Low Power Island (LPI) TLMM block +title: Qualcomm SC8280XP SoC LPASS LPI TLMM maintainers: - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> -description: | - This binding describes the Top Level Mode Multiplexer block found in the - LPASS LPI IP on most Qualcomm SoCs +description: + Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem + (LPASS) Low Power Island (LPI) of Qualcomm SC8280XP SoC. properties: compatible: @@ -35,7 +34,7 @@ properties: gpio-controller: true - '#gpio-cells': + "#gpio-cells": description: Specifying the pin number and flags, as defined in include/dt-bindings/gpio/gpio.h const: 2 @@ -43,9 +42,17 @@ properties: gpio-ranges: maxItems: 1 -#PIN CONFIGURATION NODES patternProperties: - '-pins$': + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sc8280xp-lpass-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sc8280xp-lpass-state" + additionalProperties: false + +$defs: + qcom-sc8280xp-lpass-state: type: object description: Pinctrl node's client devices use subnodes for desired pin configuration. @@ -58,7 +65,7 @@ patternProperties: List of gpio pins affected by the properties specified in this subnode. items: - pattern: "^gpio([0-1]|1[0-8]])$" + pattern: "^gpio([0-1]|1[0-8])$" function: enum: [ swr_tx_clk, swr_tx_data, swr_rx_clk, swr_rx_data, @@ -112,7 +119,7 @@ required: - clocks - clock-names - gpio-controller - - '#gpio-cells' + - "#gpio-cells" - gpio-ranges additionalProperties: false @@ -130,4 +137,21 @@ examples: gpio-controller; #gpio-cells = <2>; gpio-ranges = <&lpi_tlmm 0 0 18>; + + dmic01-state { + dmic01-clk-pins { + pins = "gpio16"; + function = "dmic1_clk"; + }; + + dmic01-clk-sleep-pins { + pins = "gpio16"; + function = "dmic1_clk"; + }; + }; + + tx-swr-data-sleep-state { + pins = "gpio0", "gpio1"; + function = "swr_tx_data"; + }; }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml index b9ab130cd558d4..4efde29c36a269 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/pinctrl/qcom,sc8280xp-pinctrl.yaml# +$id: http://devicetree.org/schemas/pinctrl/qcom,sc8280xp-tlmm.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Technologies, Inc. SC8280XP TLMM block @@ -10,8 +10,7 @@ maintainers: - Bjorn Andersson <bjorn.andersson@linaro.org> description: | - This binding describes the Top Level Mode Multiplexer block found in the - SC8280XP platform. + Top Level Mode Multiplexer pin controller in Qualcomm SC8280XP SoC. allOf: - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# @@ -25,10 +24,10 @@ properties: interrupts: true interrupt-controller: true - '#interrupt-cells': true + "#interrupt-cells": true gpio-controller: true gpio-reserved-ranges: true - '#gpio-cells': true + "#gpio-cells": true gpio-ranges: true wakeup-parent: true @@ -39,7 +38,7 @@ required: additionalProperties: false patternProperties: - '-state$': + "-state$": oneOf: - $ref: "#/$defs/qcom-sc8280xp-tlmm-state" - patternProperties: @@ -47,12 +46,13 @@ patternProperties: $ref: "#/$defs/qcom-sc8280xp-tlmm-state" additionalProperties: false -'$defs': +$defs: qcom-sc8280xp-tlmm-state: type: object description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state properties: pins: @@ -113,16 +113,6 @@ patternProperties: required: - pins - allOf: - - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state" - - if: - properties: - pins: - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-1][0-9]|22[0-7])$" - then: - required: - - function - additionalProperties: false examples: @@ -139,8 +129,8 @@ examples: gpio-ranges = <&tlmm 0 0 230>; gpio-wo-subnode-state { - pins = "gpio1"; - function = "gpio"; + pins = "gpio1"; + function = "gpio"; }; uart-w-subnodes-state { diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdm630-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdm630-pinctrl.yaml new file mode 100644 index 00000000000000..bd4fd8404aa4c5 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdm630-pinctrl.yaml @@ -0,0 +1,188 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sdm630-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SDM630 and SDM660 TLMM pin controller + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm SDM630 and SDM660 SoC. + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + enum: + - qcom,sdm630-pinctrl + - qcom,sdm660-pinctrl + + reg: + maxItems: 3 + + reg-names: + items: + - const: south + - const: center + - const: north + + interrupts: true + interrupt-controller: true + "#interrupt-cells": true + gpio-controller: true + + gpio-reserved-ranges: + minItems: 1 + maxItems: 57 + + gpio-line-names: + maxItems: 114 + + "#gpio-cells": true + gpio-ranges: true + wakeup-parent: true + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sdm630-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sdm630-tlmm-state" + additionalProperties: false + +$defs: + qcom-sdm630-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|10[0-9]|11[0-3])$" + - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk, sdc2_clk, + sdc2_cmd, sdc2_data ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + enum: [ adsp_ext, agera_pll, atest_char, atest_char0, atest_char1, + atest_char2, atest_char3, atest_gpsadc0, atest_gpsadc1, + atest_tsens, atest_tsens2, atest_usb1, atest_usb10, + atest_usb11, atest_usb12, atest_usb13, atest_usb2, atest_usb20, + atest_usb21, atest_usb22, atest_usb23, audio_ref, bimc_dte0, + bimc_dte1, blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4, + blsp_i2c5, blsp_i2c6, blsp_i2c7, blsp_i2c8_a, blsp_i2c8_b, + blsp_spi1, blsp_spi2, blsp_spi3, blsp_spi3_cs1, blsp_spi3_cs2, + blsp_spi4, blsp_spi5, blsp_spi6, blsp_spi7, blsp_spi8_a, + blsp_spi8_b, blsp_spi8_cs1, blsp_spi8_cs2, blsp_uart1, + blsp_uart2, blsp_uart5, blsp_uart6_a, blsp_uart6_b, blsp_uim1, + blsp_uim2, blsp_uim5, blsp_uim6, cam_mclk, cci_async, cci_i2c, + cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist, gcc_gp1, + gcc_gp2, gcc_gp3, gpio, gps_tx_a, gps_tx_b, gps_tx_c, + isense_dbg, jitter_bist, ldo_en, ldo_update, m_voc, mdp_vsync, + mdss_vsync0, mdss_vsync1, mdss_vsync2, mdss_vsync3, mss_lte, + nav_pps_a, nav_pps_b, nav_pps_c, pa_indicator, phase_flag0, + phase_flag1, phase_flag10, phase_flag11, phase_flag12, + phase_flag13, phase_flag14, phase_flag15, phase_flag16, + phase_flag17, phase_flag18, phase_flag19, phase_flag2, + phase_flag20, phase_flag21, phase_flag22, phase_flag23, + phase_flag24, phase_flag25, phase_flag26, phase_flag27, + phase_flag28, phase_flag29, phase_flag3, phase_flag30, + phase_flag31, phase_flag4, phase_flag5, phase_flag6, + phase_flag7, phase_flag8, phase_flag9, pll_bypassnl, pll_reset, + pri_mi2s, pri_mi2s_ws, prng_rosc, pwr_crypto, pwr_modem, + pwr_nav, qdss_cti0_a, qdss_cti0_b, qdss_cti1_a, qdss_cti1_b, + qdss_gpio, qdss_gpio0, qdss_gpio1, qdss_gpio10, qdss_gpio11, + qdss_gpio12, qdss_gpio13, qdss_gpio14, qdss_gpio15, qdss_gpio2, + qdss_gpio3, qdss_gpio4, qdss_gpio5, qdss_gpio6, qdss_gpio7, + qdss_gpio8, qdss_gpio9, qlink_enable, qlink_request, qspi_clk, + qspi_cs, qspi_data0, qspi_data1, qspi_data2, qspi_data3, + qspi_resetn, sec_mi2s, sndwire_clk, sndwire_data, sp_cmu, + ssc_irq, tgu_ch0, tgu_ch1, tsense_pwm1, tsense_pwm2, uim1_clk, + uim1_data, uim1_present, uim1_reset, uim2_clk, uim2_data, + uim2_present, uim2_reset, uim_batt, vfr_1, vsense_clkout, + vsense_data0, vsense_data1, vsense_mode, wlan1_adc0, + wlan1_adc1, wlan2_adc0, wlan2_adc1 ] + + bias-disable: true + bias-pull-down: true + bias-pull-up: true + drive-strength: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + + additionalProperties: false + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + tlmm: pinctrl@3100000 { + compatible = "qcom,sdm630-pinctrl"; + reg = <0x03100000 0x400000>, + <0x03500000 0x400000>, + <0x03900000 0x400000>; + reg-names = "south", "center", "north"; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + gpio-ranges = <&tlmm 0 0 114>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + blsp1-uart1-default-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_uart1_default: blsp2-uart1-active-state { + tx-rts-pins { + pins = "gpio16", "gpio19"; + function = "blsp_uart5"; + drive-strength = <2>; + bias-disable; + }; + + rx-pins { + pins = "gpio17"; + function = "blsp_uart5"; + drive-strength = <2>; + bias-pull-up; + }; + + cts-pins { + pins = "gpio18"; + function = "blsp_uart5"; + drive-strength = <2>; + bias-pull-down; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt deleted file mode 100644 index be034d329e10f9..00000000000000 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt +++ /dev/null @@ -1,191 +0,0 @@ -Qualcomm Technologies, Inc. SDM660 TLMM block - -This binding describes the Top Level Mode Multiplexer block found in the -SDM660 platform. - -- compatible: - Usage: required - Value type: <string> - Definition: must be "qcom,sdm660-pinctrl" or - "qcom,sdm630-pinctrl". - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: the base address and size of the north, center and south - TLMM tiles. - -- reg-names: - Usage: required - Value type: <stringlist> - Definition: names for the cells of reg, must contain "north", "center" - and "south". - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: should specify the TLMM summary IRQ. - -- interrupt-controller: - Usage: required - Value type: <none> - Definition: identifies this node as an interrupt controller - -- #interrupt-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/interrupt-controller/irq.h> - -- gpio-controller: - Usage: required - Value type: <none> - Definition: identifies this node as a gpio controller - -- gpio-ranges: - Usage: required - Value type: <prop-encoded-array> - Definition: Specifies the mapping between gpio controller and - pin-controller pins. - -- #gpio-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/gpio/gpio.h> - -Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for -a general description of GPIO and interrupt bindings. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -The pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those pin(s)/group(s), and various pin configuration -parameters, such as pull-up, drive strength, etc. - - -PIN CONFIGURATION NODES: - -The name of each subnode is not important; all subnodes should be enumerated -and processed purely based on their content. - -Each subnode only affects those parameters that are explicitly listed. In -other words, a subnode that lists a mux function but no pin configuration -parameters implies no information about any pin configuration parameters. -Similarly, a pin subnode that describes a pullup parameter implies no -information about e.g. the mux function. - - -The following generic properties as defined in pinctrl-bindings.txt are valid -to specify in a pin configuration subnode: - -- pins: - Usage: required - Value type: <string-array> - Definition: List of gpio pins affected by the properties specified in - this subnode. Valid pins are: - gpio0-gpio113, - Supports mux, bias and drive-strength - sdc1_clk, sdc1_cmd, sdc1_data sdc2_clk, sdc2_cmd, sdc2_data sdc1_rclk, - Supports bias and drive-strength - -- function: - Usage: required - Value type: <string> - Definition: Specify the alternative function to be configured for the - specified pins. Functions are only valid for gpio pins. - Valid values are: - adsp_ext, agera_pll, atest_char, atest_char0, atest_char1, - atest_char2, atest_char3, atest_gpsadc0, atest_gpsadc1, - atest_tsens, atest_tsens2, atest_usb1, atest_usb10, - atest_usb11, atest_usb12, atest_usb13, atest_usb2, - atest_usb20, atest_usb21, atest_usb22, atest_usb23, - audio_ref, bimc_dte0, bimc_dte1, blsp_i2c1, blsp_i2c2, - blsp_i2c3, blsp_i2c4, blsp_i2c5, blsp_i2c6, blsp_i2c7, - blsp_i2c8_a, blsp_i2c8_b, blsp_spi1, blsp_spi2, blsp_spi3, - blsp_spi3_cs1, blsp_spi3_cs2, blsp_spi4, blsp_spi5, - blsp_spi6, blsp_spi7, blsp_spi8_a, blsp_spi8_b, - blsp_spi8_cs1, blsp_spi8_cs2, blsp_uart1, blsp_uart2, - blsp_uart5, blsp_uart6_a, blsp_uart6_b, blsp_uim1, - blsp_uim2, blsp_uim5, blsp_uim6, cam_mclk, cci_async, - cci_i2c, cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist, - gcc_gp1, gcc_gp2, gcc_gp3, gpio, gps_tx_a, gps_tx_b, gps_tx_c, - isense_dbg, jitter_bist, ldo_en, ldo_update, m_voc, mdp_vsync, - mdss_vsync0, mdss_vsync1, mdss_vsync2, mdss_vsync3, mss_lte, - nav_pps_a, nav_pps_b, nav_pps_c, pa_indicator, phase_flag0, - phase_flag1, phase_flag10, phase_flag11, phase_flag12, - phase_flag13, phase_flag14, phase_flag15, phase_flag16, - phase_flag17, phase_flag18, phase_flag19, phase_flag2, - phase_flag20, phase_flag21, phase_flag22, phase_flag23, - phase_flag24, phase_flag25, phase_flag26, phase_flag27, - phase_flag28, phase_flag29, phase_flag3, phase_flag30, - phase_flag31, phase_flag4, phase_flag5, phase_flag6, - phase_flag7, phase_flag8, phase_flag9, pll_bypassnl, - pll_reset, pri_mi2s, pri_mi2s_ws, prng_rosc, pwr_crypto, - pwr_modem, pwr_nav, qdss_cti0_a, qdss_cti0_b, qdss_cti1_a, - qdss_cti1_b, qdss_gpio, qdss_gpio0, qdss_gpio1, qdss_gpio10, - qdss_gpio11, qdss_gpio12, qdss_gpio13, qdss_gpio14, qdss_gpio15, - qdss_gpio2, qdss_gpio3, qdss_gpio4, qdss_gpio5, qdss_gpio6, - qdss_gpio7, qdss_gpio8, qdss_gpio9, qlink_enable, qlink_request, - qspi_clk, qspi_cs, qspi_data0, qspi_data1, qspi_data2, - qspi_data3, qspi_resetn, sec_mi2s, sndwire_clk, sndwire_data, - sp_cmu, ssc_irq, tgu_ch0, tgu_ch1, tsense_pwm1, tsense_pwm2, - uim1_clk, uim1_data, uim1_present, uim1_reset, uim2_clk, - uim2_data, uim2_present, uim2_reset, uim_batt, vfr_1, - vsense_clkout, vsense_data0, vsense_data1, vsense_mode, - wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1 - -- bias-disable: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as no pull. - -- bias-pull-down: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull down. - -- bias-pull-up: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull up. - -- output-high: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - high. - Not valid for sdc pins. - -- output-low: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - low. - Not valid for sdc pins. - -- drive-strength: - Usage: optional - Value type: <u32> - Definition: Selects the drive strength for the specified pins, in mA. - Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 - -Example: - - tlmm: pinctrl@3100000 { - compatible = "qcom,sdm660-pinctrl"; - reg = <0x3100000 0x200000>, - <0x3500000 0x200000>, - <0x3900000 0x200000>; - reg-names = "south", "center", "north"; - interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - gpio-ranges = <&tlmm 0 0 114>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdm670-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdm670-tlmm.yaml new file mode 100644 index 00000000000000..7585117c0f06e8 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdm670-tlmm.yaml @@ -0,0 +1,127 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sdm670-tlmm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. SDM670 TLMM block + +maintainers: + - Richard Acayan <mailingradian@gmail.com> + +description: | + The Top Level Mode Multiplexer (TLMM) block found in the SDM670 platform. + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + const: qcom,sdm670-tlmm + + reg: + maxItems: 1 + + interrupts: true + interrupt-controller: true + "#interrupt-cells": true + gpio-controller: true + gpio-reserved-ranges: + minItems: 1 + maxItems: 75 + + "#gpio-cells": true + gpio-ranges: true + wakeup-parent: true + +required: + - compatible + - reg + +additionalProperties: false + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sdm670-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sdm670-tlmm-state" + additionalProperties: false + +$defs: + qcom-sdm670-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9])$" + - enum: [ ufs_reset, sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data, + sdc2_clk, sdc2_cmd, sdc2_data ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ adsp_ext, agera_pll, atest_char, atest_tsens, atest_tsens2, atest_usb1, atest_usb10, + atest_usb11, atest_usb12, atest_usb13, atest_usb2, atest_usb20, atest_usb21, + atest_usb22, atest_usb23, cam_mclk, cci_async, cci_i2c, cci_timer0, cci_timer1, + cci_timer2, cci_timer3, cci_timer4, copy_gp, copy_phase, dbg_out, ddr_bist, + ddr_pxi0, ddr_pxi1, ddr_pxi2, ddr_pxi3, edp_hot, edp_lcd, gcc_gp1, gcc_gp2, gcc_gp3, + gp_pdm0, gp_pdm1, gp_pdm2, gpio, gps_tx, jitter_bist, ldo_en, ldo_update, + lpass_slimbus, m_voc, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2, mdp_vsync3, + mss_lte, nav_pps, pa_indicator, pci_e0, pci_e1, phase_flag, pll_bist, pll_bypassnl, + pll_reset, pri_mi2s, pri_mi2s_ws, prng_rosc, qdss_cti, qdss, qlink_enable, + qlink_request, qua_mi2s, qup0, qup1, qup10, qup11, qup12, qup13, qup14, qup15, qup2, + qup3, qup4, qup5, qup6, qup7, qup8, qup9, qup_l4, qup_l5, qup_l6, sdc4_clk, + sdc4_cmd, sdc4_data, sd_write, sec_mi2s, ter_mi2s, tgu_ch0, tgu_ch1, tgu_ch2, + tgu_ch3, tsif1_clk, tsif1_data, tsif1_en, tsif1_error, tsif1_sync, tsif2_clk, + tsif2_data, tsif2_en, tsif2_error, tsif2_sync, uim1_clk, uim1_data, uim1_present, + uim1_reset, uim2_clk, uim2_data, uim2_present, uim2_reset, uim_batt, usb_phy, vfr_1, + vsense_trigger, wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1, wsa_clk, wsa_data, ] + + + bias-disable: true + bias-pull-down: true + bias-pull-up: true + drive-strength: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + + additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + pinctrl@3400000 { + compatible = "qcom,sdm670-tlmm"; + reg = <0x03400000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 151>; + + qup-i2c9-state { + pins = "gpio6", "gpio7"; + function = "qup9"; + }; + }; +... diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.txt deleted file mode 100644 index 7462e3743c68e3..00000000000000 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.txt +++ /dev/null @@ -1,176 +0,0 @@ -Qualcomm SDM845 TLMM block - -This binding describes the Top Level Mode Multiplexer block found in the -SDM845 platform. - -- compatible: - Usage: required - Value type: <string> - Definition: must be "qcom,sdm845-pinctrl" - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: the base address and size of the TLMM register space. - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: should specify the TLMM summary IRQ. - -- interrupt-controller: - Usage: required - Value type: <none> - Definition: identifies this node as an interrupt controller - -- #interrupt-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/interrupt-controller/irq.h> - -- gpio-controller: - Usage: required - Value type: <none> - Definition: identifies this node as a gpio controller - -- #gpio-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/gpio/gpio.h> - -Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for -a general description of GPIO and interrupt bindings. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -The pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those pin(s)/group(s), and various pin configuration -parameters, such as pull-up, drive strength, etc. - - -PIN CONFIGURATION NODES: - -The name of each subnode is not important; all subnodes should be enumerated -and processed purely based on their content. - -Each subnode only affects those parameters that are explicitly listed. In -other words, a subnode that lists a mux function but no pin configuration -parameters implies no information about any pin configuration parameters. -Similarly, a pin subnode that describes a pullup parameter implies no -information about e.g. the mux function. - - -The following generic properties as defined in pinctrl-bindings.txt are valid -to specify in a pin configuration subnode: - -- pins: - Usage: required - Value type: <string-array> - Definition: List of gpio pins affected by the properties specified in - this subnode. - - Valid pins are: - gpio0-gpio149 - Supports mux, bias and drive-strength - - sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset - Supports bias and drive-strength - -- function: - Usage: required - Value type: <string> - Definition: Specify the alternative function to be configured for the - specified pins. Functions are only valid for gpio pins. - Valid values are: - - gpio, adsp_ext, agera_pll, atest_char, atest_tsens, - atest_tsens2, atest_usb1, atest_usb10, atest_usb11, - atest_usb12, atest_usb13, atest_usb2, atest_usb20, - atest_usb21, atest_usb22, atest_usb23, audio_ref, - btfm_slimbus, cam_mclk, cci_async, cci_i2c, cci_timer0, - cci_timer1, cci_timer2, cci_timer3, cci_timer4, cri_trng, - cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, - ddr_pxi1, ddr_pxi2, ddr_pxi3, edp_hot, edp_lcd, gcc_gp1, - gcc_gp2, gcc_gp3, jitter_bist, ldo_en, ldo_update, - lpass_slimbus, m_voc, mdp_vsync, mdp_vsync0, mdp_vsync1, - mdp_vsync2, mdp_vsync3, mss_lte, nav_pps, pa_indicator, - pci_e0, pci_e1, phase_flag, pll_bist, pll_bypassnl, - pll_reset, pri_mi2s, pri_mi2s_ws, prng_rosc, qdss_cti, - qdss, qlink_enable, qlink_request, qua_mi2s, qup0, qup1, - qup10, qup11, qup12, qup13, qup14, qup15, qup2, qup3, qup4, - qup5, qup6, qup7, qup8, qup9, qup_l4, qup_l5, qup_l6, - qspi_clk, qspi_cs, qspi_data, sd_write, sdc4_clk, sdc4_cmd, - sdc4_data, sec_mi2s, sp_cmu, spkr_i2s, ter_mi2s, tgu_ch0, - tgu_ch1, tgu_ch2, tgu_ch3, tsense_pwm1, tsense_pwm2, - tsif1_clk, tsif1_data, tsif1_en, tsif1_error, tsif1_sync, - tsif2_clk, tsif2_data, tsif2_en, tsif2_error, tsif2_sync, - uim1_clk, uim1_data, uim1_present, uim1_reset, uim2_clk, - uim2_data, uim2_present, uim2_reset, uim_batt, usb_phy, - vfr_1, vsense_trigger, wlan1_adc0, wlan1_adc1, wlan2_adc0, - wlan2_adc1, - -- bias-disable: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as no pull. - -- bias-pull-down: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull down. - -- bias-pull-up: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull up. - -- output-high: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - high. - Not valid for sdc pins. - -- output-low: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - low. - Not valid for sdc pins. - -- drive-strength: - Usage: optional - Value type: <u32> - Definition: Selects the drive strength for the specified pins, in mA. - Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 - -Example: - - tlmm: pinctrl@3400000 { - compatible = "qcom,sdm845-pinctrl"; - reg = <0x03400000 0xc00000>; - interrupts = <GIC_SPI 208 0>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - - qup9_active: qup9-active { - mux { - pins = "gpio4", "gpio5"; - function = "qup9"; - }; - - config { - pins = "gpio4", "gpio5"; - drive-strength = <2>; - bias-disable; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml new file mode 100644 index 00000000000000..c9627777ceb321 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml @@ -0,0 +1,158 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sdm845-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SDM845 TLMM pin controller + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm SDM845 SoC. + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + const: qcom,sdm845-pinctrl + + reg: + maxItems: 1 + + interrupts: true + interrupt-controller: true + "#interrupt-cells": true + gpio-controller: true + + gpio-reserved-ranges: + minItems: 1 + maxItems: 75 + + gpio-line-names: + maxItems: 150 + + "#gpio-cells": true + gpio-ranges: true + wakeup-parent: true + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sdm845-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sdm845-tlmm-state" + additionalProperties: false + +$defs: + qcom-sdm845-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9])$" + - enum: [ ufs_reset, sdc2_clk, sdc2_cmd, sdc2_data ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + enum: [ adsp_ext, agera_pll, atest_char, atest_tsens, atest_tsens2, + atest_usb1, atest_usb10, atest_usb11, atest_usb12, atest_usb13, + atest_usb2, atest_usb20, atest_usb21, atest_usb22, atest_usb23, + audio_ref, btfm_slimbus, cam_mclk, cci_async, cci_i2c, + cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, + cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, + ddr_pxi1, ddr_pxi2, ddr_pxi3, edp_hot, edp_lcd, gcc_gp1, + gcc_gp2, gcc_gp3, gpio, jitter_bist, ldo_en, ldo_update, + lpass_slimbus, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2, + mdp_vsync3, mss_lte, m_voc, nav_pps, pa_indicator, pci_e0, + pci_e1, phase_flag, pll_bist, pll_bypassnl, pll_reset, + pri_mi2s, pri_mi2s_ws, prng_rosc, qdss, qdss_cti, qlink_enable, + qlink_request, qspi_clk, qspi_cs, qspi_data, qua_mi2s, qup0, + qup1, qup10, qup11, qup12, qup13, qup14, qup15, qup2, qup3, + qup4, qup5, qup6, qup7, qup8, qup9, qup_l4, qup_l5, qup_l6, + sdc4_clk, sdc4_cmd, sdc4_data, sd_write, sec_mi2s, sp_cmu, + spkr_i2s, ter_mi2s, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, + tsense_pwm1, tsense_pwm2, tsif1_clk, tsif1_data, tsif1_en, + tsif1_error, tsif1_sync, tsif2_clk, tsif2_data, tsif2_en, + tsif2_error, tsif2_sync, uim1_clk, uim1_data, uim1_present, + uim1_reset, uim2_clk, uim2_data, uim2_present, uim2_reset, + uim_batt, usb_phy, vfr_1, vsense_trigger, wlan1_adc0, + wlan1_adc1, wlan2_adc0, wlan2_adc1] + + bias-disable: true + bias-pull-down: true + bias-pull-up: true + drive-strength: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + + additionalProperties: false + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + pinctrl@3400000 { + compatible = "qcom,sdm845-pinctrl"; + reg = <0x03400000 0xc00000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 151>; + wakeup-parent = <&pdc_intc>; + + cci0-default-state { + pins = "gpio17", "gpio18"; + function = "cci_i2c"; + + bias-pull-up; + drive-strength = <2>; + }; + + cam0-default-state { + rst-pins { + pins = "gpio9"; + function = "gpio"; + + drive-strength = <16>; + bias-disable; + }; + + mclk0-pins { + pins = "gpio13"; + function = "cam_mclk"; + + drive-strength = <16>; + bias-disable; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml index a38090b14aab21..a76117e41d9302 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml @@ -9,9 +9,8 @@ title: Qualcomm Technologies, Inc. SDX55 TLMM block maintainers: - Vinod Koul <vkoul@kernel.org> -description: | - This binding describes the Top Level Mode Multiplexer block found in the - SDX55 platform. +description: + Top Level Mode Multiplexer pin controller in Qualcomm SDX55 SoC. properties: compatible: @@ -21,38 +20,32 @@ properties: description: Specifies the base address and size of the TLMM register space maxItems: 1 - interrupts: - description: Specifies the TLMM summary IRQ - maxItems: 1 - + interrupts: true interrupt-controller: true - - '#interrupt-cells': - description: Specifies the PIN numbers and Flags, as defined in - include/dt-bindings/interrupt-controller/irq.h - const: 2 - + "#interrupt-cells": true gpio-controller: true - - '#gpio-cells': - description: Specifying the pin number and flags, as defined in - include/dt-bindings/gpio/gpio.h - const: 2 - - gpio-ranges: - maxItems: 1 + "#gpio-cells": true + gpio-ranges: true gpio-reserved-ranges: maxItems: 1 -#PIN CONFIGURATION NODES patternProperties: - '-pins$': + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sdx55-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sdx55-tlmm-state" + additionalProperties: false + +$defs: + qcom-sdx55-tlmm-state: type: object description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. - $ref: "/schemas/pinctrl/pincfg-node.yaml" + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state properties: pins: @@ -96,62 +89,46 @@ patternProperties: uim1_present, uim1_reset, uim2_clk, uim2_data, uim2_present, uim2_reset, usb2phy_ac, vsense_trigger ] - drive-strength: - enum: [2, 4, 6, 8, 10, 12, 14, 16] - default: 2 - description: - Selects the drive strength for the specified pins, in mA. - bias-pull-down: true - bias-pull-up: true - bias-disable: true - + drive-strength: true output-high: true - output-low: true required: - pins - - function additionalProperties: false allOf: - - $ref: "pinctrl.yaml#" + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# required: - compatible - reg - - interrupts - - interrupt-controller - - '#interrupt-cells' - - gpio-controller - - '#gpio-cells' - - gpio-ranges additionalProperties: false examples: - | - #include <dt-bindings/interrupt-controller/arm-gic.h> - tlmm: pinctrl@1f00000 { - compatible = "qcom,sdx55-pinctrl"; - reg = <0x0f100000 0x300000>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&tlmm 0 0 108>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>; - - serial-pins { - pins = "gpio8", "gpio9"; - function = "blsp_uart3"; - drive-strength = <8>; - bias-disable; - }; + #include <dt-bindings/interrupt-controller/arm-gic.h> + tlmm: pinctrl@1f00000 { + compatible = "qcom,sdx55-pinctrl"; + reg = <0x0f100000 0x300000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 108>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>; + + serial-state { + pins = "gpio8", "gpio9"; + function = "blsp_uart3"; + drive-strength = <8>; + bias-disable; }; + }; ... diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml index cdfcf29dffee8b..2f53905260e616 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/pinctrl/qcom,sdx65-pinctrl.yaml# +$id: http://devicetree.org/schemas/pinctrl/qcom,sdx65-tlmm.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Technologies, Inc. SDX65 TLMM block @@ -10,8 +10,7 @@ maintainers: - Vamsi krishna Lanka <quic_vamslank@quicinc.com> description: - This binding describes the Top Level Mode Multiplexer block found in the - SDX65 platform. + Top Level Mode Multiplexer pin controller in Qualcomm SDX65 SoC. properties: compatible: @@ -20,44 +19,32 @@ properties: reg: maxItems: 1 - interrupts: - maxItems: 1 - + interrupts: true interrupt-controller: true - - '#interrupt-cells': - description: Specifies the PIN numbers and Flags, as defined in - include/dt-bindings/interrupt-controller/irq.h - const: 2 - + "#interrupt-cells": true gpio-controller: true - - '#gpio-cells': - description: Specifying the pin number and flags, as defined in - include/dt-bindings/gpio/gpio.h - const: 2 - - gpio-ranges: - maxItems: 1 + "#gpio-cells": true + gpio-ranges: true gpio-reserved-ranges: maxItems: 1 -#PIN CONFIGURATION NODES patternProperties: - '-state$': + "-state$": oneOf: - $ref: "#/$defs/qcom-sdx65-tlmm-state" - patternProperties: - ".*": + "-pins$": $ref: "#/$defs/qcom-sdx65-tlmm-state" -'$defs': + additionalProperties: false + +$defs: qcom-sdx65-tlmm-state: type: object description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state" + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state properties: pins: @@ -122,37 +109,24 @@ patternProperties: qspi_cs, ssbi2, ssbi1, mss_lte, qspi_clk, qspi0, qspi1, qspi2, qspi3, gpio ] - drive-strength: - enum: [2, 4, 6, 8, 10, 12, 14, 16] - default: 2 - description: - Selects the drive strength for the specified pins, in mA. - bias-pull-down: true - bias-pull-up: true - bias-disable: true - + drive-strength: true output-high: true - output-low: true required: - pins - - function additionalProperties: false +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + required: - compatible - reg - - interrupts - - interrupt-controller - - '#interrupt-cells' - - gpio-controller - - '#gpio-cells' - - gpio-ranges additionalProperties: false @@ -175,13 +149,13 @@ examples: }; uart-w-subnodes-state { - rx { + rx-pins { pins = "gpio4"; function = "blsp_uart1"; bias-pull-up; }; - tx { + tx-pins { pins = "gpio5"; function = "blsp_uart1"; bias-disable; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-tlmm.yaml index e39fbb36d8c1c8..164f24db8b2b65 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-tlmm.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/pinctrl/qcom,sm6115-pinctrl.yaml# +$id: http://devicetree.org/schemas/pinctrl/qcom,sm6115-tlmm.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Technologies, Inc. SM6115, SM4250 TLMM block @@ -10,15 +10,14 @@ maintainers: - Iskren Chernev <iskren.chernev@gmail.com> description: - This binding describes the Top Level Mode Multiplexer block found in the - SM4250/6115 platforms. + Top Level Mode Multiplexer pin controller in Qualcomm SM4250 and SM6115 + SoCs. properties: compatible: const: qcom,sm6115-tlmm reg: - minItems: 3 maxItems: 3 reg-names: @@ -27,35 +26,17 @@ properties: - const: south - const: east - interrupts: - description: Specifies the TLMM summary IRQ - maxItems: 1 - + interrupts: true interrupt-controller: true - - '#interrupt-cells': - description: - Specifies the PIN numbers and Flags, as defined in defined in - include/dt-bindings/interrupt-controller/irq.h - const: 2 - + "#interrupt-cells": true gpio-controller: true - - '#gpio-cells': - description: Specifying the pin number and flags, as defined in - include/dt-bindings/gpio/gpio.h - const: 2 - - gpio-ranges: - maxItems: 1 - + "#gpio-cells": true + gpio-ranges: true gpio-reserved-ranges: true - wakeup-parent: true -#PIN CONFIGURATION NODES patternProperties: - '-state$': + "-state$": oneOf: - $ref: "#/$defs/qcom-sm6115-tlmm-state" - patternProperties: @@ -63,12 +44,13 @@ patternProperties: $ref: "#/$defs/qcom-sm6115-tlmm-state" additionalProperties: false -'$defs': +$defs: qcom-sm6115-tlmm-state: type: object description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state properties: pins: @@ -101,50 +83,25 @@ patternProperties: uim2_present, uim2_reset, usb_phy, vfr_1, vsense_trigger, wlan1_adc0, elan1_adc1 ] - drive-strength: - enum: [2, 4, 6, 8, 10, 12, 14, 16] - default: 2 - description: - Selects the drive strength for the specified pins, in mA. - bias-pull-down: true - bias-pull-up: true - bias-disable: true - + drive-strength: true output-high: true - output-low: true required: - pins - allOf: - - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state" - - if: - properties: - pins: - pattern: "^gpio([0-9]|[1-9][0-9]|10[0-9]|11[0-2])$" - then: - required: - - function - additionalProperties: false allOf: - - $ref: "pinctrl.yaml#" + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# required: - compatible - reg - reg-names - - interrupts - - interrupt-controller - - '#interrupt-cells' - - gpio-controller - - '#gpio-cells' - - gpio-ranges additionalProperties: false diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml index 5cb8b272cb7d89..e1dd54a160d550 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml @@ -1,19 +1,17 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/pinctrl/qcom,sm6125-pinctrl.yaml# +$id: http://devicetree.org/schemas/pinctrl/qcom,sm6125-tlmm.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Technologies, Inc. SM6125 TLMM block maintainers: - Martin Botka <martin.botka@somainline.org> -description: | - This binding describes the Top Level Mode Multiplexer (TLMM) block found - in the SM6125 platform. +description: + Top Level Mode Multiplexer pin controller in Qualcomm SM6125 SoC. allOf: - - $ref: "pinctrl.yaml#" - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# properties: @@ -21,21 +19,20 @@ properties: const: qcom,sm6125-tlmm reg: - minItems: 3 maxItems: 3 reg-names: items: - - const: "west" - - const: "south" - - const: "east" + - const: west + - const: south + - const: east interrupts: true interrupt-controller: true - '#interrupt-cells': true + "#interrupt-cells": true gpio-controller: true gpio-reserved-ranges: true - '#gpio-cells': true + "#gpio-cells": true gpio-ranges: true wakeup-parent: true @@ -47,7 +44,7 @@ required: additionalProperties: false patternProperties: - '-state$': + "-state$": oneOf: - $ref: "#/$defs/qcom-sm6125-tlmm-state" - patternProperties: @@ -61,6 +58,7 @@ $defs: description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state properties: pins: @@ -112,16 +110,6 @@ $defs: required: - pins - allOf: - - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state" - - if: - properties: - pins: - pattern: "^gpio[0-9]|[1-9][0-9]|1[0-2][0-9]|13[0-2]$" - then: - required: - - function - additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-tlmm.yaml index 856b9c567ecb92..41e3e0afc9a888 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-tlmm.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/pinctrl/qcom,sm6350-pinctrl.yaml# +$id: http://devicetree.org/schemas/pinctrl/qcom,sm6350-tlmm.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Technologies, Inc. SM6350 TLMM block @@ -9,12 +9,10 @@ title: Qualcomm Technologies, Inc. SM6350 TLMM block maintainers: - Konrad Dybcio <konrad.dybcio@somainline.org> -description: | - This binding describes the Top Level Mode Multiplexer (TLMM) block found - in the SM6350 platform. +description: + Top Level Mode Multiplexer pin controller in Qualcomm SM6350 SoC. allOf: - - $ref: "pinctrl.yaml#" - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# properties: @@ -26,10 +24,10 @@ properties: interrupts: true interrupt-controller: true - '#interrupt-cells': true + "#interrupt-cells": true gpio-controller: true gpio-reserved-ranges: true - '#gpio-cells': true + "#gpio-cells": true gpio-ranges: true wakeup-parent: true @@ -40,7 +38,7 @@ required: additionalProperties: false patternProperties: - '-state$': + "-state$": oneOf: - $ref: "#/$defs/qcom-sm6350-tlmm-state" - patternProperties: @@ -54,6 +52,7 @@ $defs: description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state properties: pins: @@ -111,16 +110,6 @@ $defs: required: - pins - allOf: - - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state" - - if: - properties: - pins: - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9]|15[0-7])$" - then: - required: - - function - additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml index 025faf87d147a1..d54ebb2bd5a8f9 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml @@ -9,12 +9,10 @@ title: Qualcomm Technologies, Inc. SM6375 TLMM block maintainers: - Konrad Dybcio <konrad.dybcio@somainline.org> -description: | - This binding describes the Top Level Mode Multiplexer (TLMM) block found - in the SM6375 platform. +description: + Top Level Mode Multiplexer pin controller in Qualcomm SM6375 SoC. allOf: - - $ref: "pinctrl.yaml#" - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# properties: @@ -26,10 +24,10 @@ properties: interrupts: true interrupt-controller: true - '#interrupt-cells': true + "#interrupt-cells": true gpio-controller: true gpio-reserved-ranges: true - '#gpio-cells': true + "#gpio-cells": true gpio-ranges: true wakeup-parent: true @@ -40,7 +38,7 @@ required: additionalProperties: false patternProperties: - '-state$': + "-state$": oneOf: - $ref: "#/$defs/qcom-sm6375-tlmm-state" - patternProperties: @@ -54,6 +52,7 @@ $defs: description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state properties: pins: @@ -120,16 +119,6 @@ $defs: required: - pins - allOf: - - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state" - - if: - properties: - pins: - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9]|15[0-6])$" - then: - required: - - function - additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.txt deleted file mode 100644 index fa37733e510229..00000000000000 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.txt +++ /dev/null @@ -1,190 +0,0 @@ -Qualcomm SM8150 TLMM block - -This binding describes the Top Level Mode Multiplexer block found in the -QCS404 platform. - -- compatible: - Usage: required - Value type: <string> - Definition: must be "qcom,sm8150-pinctrl" - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: the base address and size of the north, south, west - and east TLMM tiles. - -- reg-names: - Usage: required - Value type: <prop-encoded-array> - Defintiion: names for the cells of reg, must contain "north", "south" - "west" and "east". - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: should specify the TLMM summary IRQ. - -- interrupt-controller: - Usage: required - Value type: <none> - Definition: identifies this node as an interrupt controller - -- #interrupt-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/interrupt-controller/irq.h> - -- gpio-controller: - Usage: required - Value type: <none> - Definition: identifies this node as a gpio controller - -- #gpio-cells: - Usage: required - Value type: <u32> - Definition: must be 2. Specifying the pin number and flags, as defined - in <dt-bindings/gpio/gpio.h> - -- gpio-ranges: - Usage: required - Value type: <prop-encoded-array> - Definition: see ../gpio/gpio.txt - -- gpio-reserved-ranges: - Usage: optional - Value type: <prop-encoded-array> - Definition: see ../gpio/gpio.txt - -Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for -a general description of GPIO and interrupt bindings. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -The pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those pin(s)/group(s), and various pin configuration -parameters, such as pull-up, drive strength, etc. - - -PIN CONFIGURATION NODES: - -The name of each subnode is not important; all subnodes should be enumerated -and processed purely based on their content. - -Each subnode only affects those parameters that are explicitly listed. In -other words, a subnode that lists a mux function but no pin configuration -parameters implies no information about any pin configuration parameters. -Similarly, a pin subnode that describes a pullup parameter implies no -information about e.g. the mux function. - - -The following generic properties as defined in pinctrl-bindings.txt are valid -to specify in a pin configuration subnode: - -- pins: - Usage: required - Value type: <string-array> - Definition: List of gpio pins affected by the properties specified in - this subnode. - - Valid pins are: - gpio0-gpio149 - Supports mux, bias and drive-strength - - sdc1_clk, sdc1_cmd, sdc1_data sdc2_clk, sdc2_cmd, - sdc2_data sdc1_rclk - Supports bias and drive-strength - - ufs_reset - Supports bias and drive-strength - -- function: - Usage: required - Value type: <string> - Definition: Specify the alternative function to be configured for the - specified pins. Functions are only valid for gpio pins. - Valid values are: - - adsp_ext, agera_pll, aoss_cti, ddr_pxi2, atest_char, - atest_char0, atest_char1, atest_char2, atest_char3, - audio_ref, atest_usb1, atest_usb2, atest_usb10, - atest_usb11, atest_usb12, atest_usb13, atest_usb20, - atest_usb21, atest_usb22, atest_usb2, atest_usb23, - btfm_slimbus, cam_mclk, cci_async, cci_i2c, cci_timer0, - cci_timer1, cci_timer2, cci_timer3, cci_timer4, - cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist, - ddr_pxi0, ddr_pxi1, ddr_pxi3, edp_hot, edp_lcd, - emac_phy, emac_pps, gcc_gp1, gcc_gp2, gcc_gp3, gpio, - hs1_mi2s, hs2_mi2s, hs3_mi2s, jitter_bist, - lpass_slimbus, mdp_vsync, mdp_vsync0, mdp_vsync1, - mdp_vsync2, mdp_vsync3, mss_lte, m_voc, nav_pps, - pa_indicator, pci_e0, phase_flag, pll_bypassnl, - pll_bist, pci_e1, pll_reset, pri_mi2s, pri_mi2s_ws, - prng_rosc, qdss, qdss_cti, qlink_request, qlink_enable, - qspi0, qspi1, qspi2, qspi3, qspi_clk, qspi_cs, qua_mi2s, - qup0, qup1, qup2, qup3, qup4, qup5, qup6, qup7, qup8, - qup9, qup10, qup11, qup12, qup13, qup14, qup15, qup16, - qup17, qup18, qup19, qup_l4, qup_l5, qup_l6, rgmii, - sdc4, sd_write, sec_mi2s, spkr_i2s, sp_cmu, ter_mi2s, - tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tsense_pwm1, - tsense_pwm2, tsif1, tsif2, uim1, uim2, uim_batt, - usb2phy_ac, usb_phy, vfr_1, vsense_trigger, wlan1_adc0, - wlan1_adc1, wlan2_adc0, wlan2_adc1, wmss_reset - -- bias-disable: - Usage: optional - Value type: <none> - Definition: The specified pins should be configued as no pull. - -- bias-pull-down: - Usage: optional - Value type: <none> - Definition: The specified pins should be configued as pull down. - -- bias-pull-up: - Usage: optional - Value type: <none> - Definition: The specified pins should be configued as pull up. - -- output-high: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - high. - Not valid for sdc pins. - -- output-low: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - low. - Not valid for sdc pins. - -- drive-strength: - Usage: optional - Value type: <u32> - Definition: Selects the drive strength for the specified pins, in mA. - Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 - -Example: - - tlmm: pinctrl@3000000 { - compatible = "qcom,sm8150-pinctrl"; - reg = <0x03100000 0x300000>, - <0x03500000 0x300000>, - <0x03900000 0x300000>, - <0x03D00000 0x300000>; - reg-names = "west", "east", "north", "south"; - interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&tlmm 0 0 175>; - gpio-reserved-ranges = <0 4>, <126 4>; - interrupt-controller; - #interrupt-cells = <2>; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.yaml new file mode 100644 index 00000000000000..85adddbdee566d --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.yaml @@ -0,0 +1,173 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sm8150-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8150 TLMM pin controller + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm SM8150 SoC. + +properties: + compatible: + const: qcom,sm8150-pinctrl + + reg: + maxItems: 4 + + reg-names: + items: + - const: west + - const: east + - const: north + - const: south + + interrupts: true + interrupt-controller: true + "#interrupt-cells": true + gpio-controller: true + "#gpio-cells": true + gpio-ranges: true + wakeup-parent: true + + gpio-reserved-ranges: + minItems: 1 + maxItems: 88 + + gpio-line-names: + maxItems: 175 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sm8150-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sm8150-tlmm-state" + additionalProperties: false + +$defs: + qcom-sm8150-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-6][0-9]|17[0-4])$" + - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ adsp_ext, agera_pll, aoss_cti, ddr_pxi2, atest_char, + atest_char0, atest_char1, atest_char2, atest_char3, audio_ref, + atest_usb1, atest_usb2, atest_usb10, atest_usb11, atest_usb12, + atest_usb13, atest_usb20, atest_usb21, atest_usb22, atest_usb2, + atest_usb23, btfm_slimbus, cam_mclk, cci_async, cci_i2c, + cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, + cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, + ddr_pxi1, ddr_pxi3, edp_hot, edp_lcd, emac_phy, emac_pps, + gcc_gp1, gcc_gp2, gcc_gp3, gpio, hs1_mi2s, hs2_mi2s, hs3_mi2s, + jitter_bist, lpass_slimbus, mdp_vsync, mdp_vsync0, mdp_vsync1, + mdp_vsync2, mdp_vsync3, mss_lte, m_voc, nav_pps, pa_indicator, + pci_e0, phase_flag, pll_bypassnl, pll_bist, pci_e1, pll_reset, + pri_mi2s, pri_mi2s_ws, prng_rosc, qdss, qdss_cti, + qlink_request, qlink_enable, qspi0, qspi1, qspi2, qspi3, + qspi_clk, qspi_cs, qua_mi2s, qup0, qup1, qup2, qup3, qup4, + qup5, qup6, qup7, qup8, qup9, qup10, qup11, qup12, qup13, + qup14, qup15, qup16, qup17, qup18, qup19, qup_l4, qup_l5, + qup_l6, rgmii, sdc4, sd_write, sec_mi2s, spkr_i2s, sp_cmu, + ter_mi2s, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tsense_pwm1, + tsense_pwm2, tsif1, tsif2, uim1, uim2, uim_batt, usb2phy_ac, + usb_phy, vfr_1, vsense_trigger, wlan1_adc0, wlan1_adc1, + wlan2_adc0, wlan2_adc1, wmss_reset ] + + bias-pull-down: true + bias-pull-up: true + bias-disable: true + drive-strength: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + + additionalProperties: false + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +required: + - compatible + - reg + - reg-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + tlmm: pinctrl@3100000 { + compatible = "qcom,sm8150-pinctrl"; + reg = <0x03100000 0x300000>, + <0x03500000 0x300000>, + <0x03900000 0x300000>, + <0x03d00000 0x300000>; + reg-names = "west", "east", "north", "south"; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-ranges = <&tlmm 0 0 176>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + wakeup-parent = <&pdc>; + + qup-spi0-default-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "qup0"; + drive-strength = <6>; + bias-disable; + }; + + pcie1-default-state { + perst-pins { + pins = "gpio102"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq-pins { + pins = "gpio103"; + function = "pci_e1"; + drive-strength = <2>; + bias-pull-up; + }; + + wake-pins { + pins = "gpio104"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml index 06efb1382876c5..bd45faa3f0789f 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml @@ -4,22 +4,20 @@ $id: http://devicetree.org/schemas/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Qualcomm Technologies, Inc. Low Power Audio SubSystem (LPASS) - Low Power Island (LPI) TLMM block +title: Qualcomm SM8250 SoC LPASS LPI TLMM maintainers: - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> -description: | - This binding describes the Top Level Mode Multiplexer block found in the - LPASS LPI IP on most Qualcomm SoCs +description: + Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem + (LPASS) Low Power Island (LPI) of Qualcomm SM8250 SoC. properties: compatible: const: qcom,sm8250-lpass-lpi-pinctrl reg: - minItems: 2 maxItems: 2 clocks: @@ -34,7 +32,7 @@ properties: gpio-controller: true - '#gpio-cells': + "#gpio-cells": description: Specifying the pin number and flags, as defined in include/dt-bindings/gpio/gpio.h const: 2 @@ -42,9 +40,17 @@ properties: gpio-ranges: maxItems: 1 -#PIN CONFIGURATION NODES patternProperties: - '-pins$': + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sm8250-lpass-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sm8250-lpass-state" + additionalProperties: false + +$defs: + qcom-sm8250-lpass-state: type: object description: Pinctrl node's client devices use subnodes for desired pin configuration. @@ -88,13 +94,11 @@ patternProperties: 3: Reserved (No adjustments) bias-pull-down: true - bias-pull-up: true - + bias-bus-hold: true bias-disable: true - + input-enable: true output-high: true - output-low: true required: @@ -104,7 +108,7 @@ patternProperties: additionalProperties: false allOf: - - $ref: "pinctrl.yaml#" + - $ref: pinctrl.yaml# required: - compatible @@ -112,7 +116,7 @@ required: - clocks - clock-names - gpio-controller - - '#gpio-cells' + - "#gpio-cells" - gpio-ranges additionalProperties: false @@ -130,4 +134,28 @@ examples: gpio-controller; #gpio-cells = <2>; gpio-ranges = <&lpi_tlmm 0 0 14>; + + wsa-swr-active-state { + clk-pins { + pins = "gpio10"; + function = "wsa_swr_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio11"; + function = "wsa_swr_data"; + drive-strength = <2>; + slew-rate = <1>; + }; + }; + + tx-swr-sleep-clk-state { + pins = "gpio0"; + function = "swr_tx_clk"; + drive-strength = <2>; + bias-pull-down; + }; }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml index c44d02d28bc9f1..c80f3847ac0873 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml @@ -9,133 +9,109 @@ title: Qualcomm Technologies, Inc. SM8250 TLMM block maintainers: - Bjorn Andersson <bjorn.andersson@linaro.org> -description: | - This binding describes the Top Level Mode Multiplexer block found in the - SM8250 platform. +description: + Top Level Mode Multiplexer pin controller in the Qualcomm SM8250 SoC. properties: compatible: const: qcom,sm8250-pinctrl reg: - minItems: 3 maxItems: 3 reg-names: items: - - const: "west" - - const: "south" - - const: "north" - - interrupts: - description: Specifies the TLMM summary IRQ - maxItems: 1 + - const: west + - const: south + - const: north + interrupts: true interrupt-controller: true - - '#interrupt-cells': - description: - Specifies the PIN numbers and Flags, as defined in defined in - include/dt-bindings/interrupt-controller/irq.h - const: 2 - + "#interrupt-cells": true gpio-controller: true + "#gpio-cells": true + gpio-ranges: true + wakeup-parent: true - '#gpio-cells': - description: Specifying the pin number and flags, as defined in - include/dt-bindings/gpio/gpio.h - const: 2 - - gpio-ranges: - maxItems: 1 + gpio-reserved-ranges: + minItems: 1 + maxItems: 90 - wakeup-parent: true + gpio-line-names: + maxItems: 180 -#PIN CONFIGURATION NODES patternProperties: - '^.*$': - if: - type: object - then: - properties: - pins: - description: - List of gpio pins affected by the properties specified in this - subnode. - items: - oneOf: - - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-7][0-9])$" - - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ] - minItems: 1 - maxItems: 36 - - function: - description: - Specify the alternative function to be configured for the specified - pins. - - enum: [ aoss_cti, atest, audio_ref, cam_mclk, cci_async, cci_i2c, - cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, cri_trng, - cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1, - ddr_pxi2, ddr_pxi3, dp_hot, dp_lcd, gcc_gp1, gcc_gp2, gcc_gp3, gpio, - ibi_i3c, jitter_bist, lpass_slimbus, mdp_vsync, mdp_vsync0, - mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s0_data0, mi2s0_data1, - mi2s0_sck, mi2s0_ws, mi2s1_data0, mi2s1_data1, mi2s1_sck, mi2s1_ws, - mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, pci_e0, pci_e1, - pci_e2, phase_flag, pll_bist, pll_bypassnl, pll_clk, pll_reset, - pri_mi2s, prng_rosc, qdss_cti, qdss_gpio, qspi0, qspi1, qspi2, qspi3, - qspi_clk, qspi_cs, qup0, qup1, qup10, qup11, qup12, qup13, qup14, - qup15, qup16, qup17, qup18, qup19, qup2, qup3, qup4, qup5, qup6, - qup7, qup8, qup9, qup_l4, qup_l5, qup_l6, sd_write, sdc40, sdc41, - sdc42, sdc43, sdc4_clk, sdc4_cmd, sec_mi2s, sp_cmu, tgu_ch0, tgu_ch1, - tgu_ch2, tgu_ch3, tsense_pwm1, tsense_pwm2, tsif0_clk, tsif0_data, - tsif0_en, tsif0_error, tsif0_sync, tsif1_clk, tsif1_data, tsif1_en, - tsif1_error, tsif1_sync, usb2phy_ac, usb_phy, vsense_trigger ] - - drive-strength: - enum: [2, 4, 6, 8, 10, 12, 14, 16] - default: 2 - description: - Selects the drive strength for the specified pins, in mA. - - bias-pull-down: true - - bias-pull-up: true - - bias-disable: true - - output-high: true - - output-low: true - - required: - - pins - - allOf: - - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state" - - if: - properties: - pins: - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-7][0-9])$" - then: - required: - - function - - additionalProperties: false + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sm8250-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sm8250-tlmm-state" + additionalProperties: false + +$defs: + qcom-sm8250-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-7][0-9])$" + - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ aoss_cti, atest, audio_ref, cam_mclk, cci_async, cci_i2c, + cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, cri_trng, + cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1, + ddr_pxi2, ddr_pxi3, dp_hot, dp_lcd, gcc_gp1, gcc_gp2, gcc_gp3, gpio, + ibi_i3c, jitter_bist, lpass_slimbus, mdp_vsync, mdp_vsync0, + mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s0_data0, mi2s0_data1, + mi2s0_sck, mi2s0_ws, mi2s1_data0, mi2s1_data1, mi2s1_sck, mi2s1_ws, + mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, pci_e0, pci_e1, + pci_e2, phase_flag, pll_bist, pll_bypassnl, pll_clk, pll_reset, + pri_mi2s, prng_rosc, qdss_cti, qdss_gpio, qspi0, qspi1, qspi2, qspi3, + qspi_clk, qspi_cs, qup0, qup1, qup10, qup11, qup12, qup13, qup14, + qup15, qup16, qup17, qup18, qup19, qup2, qup3, qup4, qup5, qup6, + qup7, qup8, qup9, qup_l4, qup_l5, qup_l6, sd_write, sdc40, sdc41, + sdc42, sdc43, sdc4_clk, sdc4_cmd, sec_mi2s, sp_cmu, tgu_ch0, tgu_ch1, + tgu_ch2, tgu_ch3, tsense_pwm1, tsense_pwm2, tsif0_clk, tsif0_data, + tsif0_en, tsif0_error, tsif0_sync, tsif1_clk, tsif1_data, tsif1_en, + tsif1_error, tsif1_sync, usb2phy_ac, usb_phy, vsense_trigger ] + + bias-pull-down: true + bias-pull-up: true + bias-disable: true + drive-strength: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + + additionalProperties: false allOf: - - $ref: "pinctrl.yaml#" + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# required: - compatible - reg - reg-names - - interrupts - - interrupt-controller - - '#interrupt-cells' - - gpio-controller - - '#gpio-cells' - - gpio-ranges additionalProperties: false @@ -143,16 +119,16 @@ examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> pinctrl@1f00000 { - compatible = "qcom,sm8250-pinctrl"; - reg = <0x0f100000 0x300000>, - <0x0f500000 0x300000>, - <0x0f900000 0x300000>; - reg-names = "west", "south", "north"; - interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-ranges = <&tlmm 0 0 180>; - wakeup-parent = <&pdc>; + compatible = "qcom,sm8250-pinctrl"; + reg = <0x0f100000 0x300000>, + <0x0f500000 0x300000>, + <0x0f900000 0x300000>; + reg-names = "west", "south", "north"; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 180>; + wakeup-parent = <&pdc>; }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-tlmm.yaml index 6ae5571f60da0a..0b1e4aa5819e65 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-tlmm.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/pinctrl/qcom,sm8350-pinctrl.yaml# +$id: http://devicetree.org/schemas/pinctrl/qcom,sm8350-tlmm.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Technologies, Inc. SM8350 TLMM block @@ -9,12 +9,10 @@ title: Qualcomm Technologies, Inc. SM8350 TLMM block maintainers: - Vinod Koul <vkoul@kernel.org> -description: | - This binding describes the Top Level Mode Multiplexer (TLMM) block found - in the SM8350 platform. +description: + Top Level Mode Multiplexer pin controller in Qualcomm SM8350 SoC. allOf: - - $ref: "pinctrl.yaml#" - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# properties: @@ -26,10 +24,10 @@ properties: interrupts: true interrupt-controller: true - '#interrupt-cells': true + "#interrupt-cells": true gpio-controller: true gpio-reserved-ranges: true - '#gpio-cells': true + "#gpio-cells": true gpio-ranges: true wakeup-parent: true @@ -40,7 +38,7 @@ required: additionalProperties: false patternProperties: - '-state$': + "-state$": oneOf: - $ref: "#/$defs/qcom-sm8350-tlmm-state" - patternProperties: @@ -54,6 +52,7 @@ $defs: description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state properties: pins: @@ -108,16 +107,6 @@ $defs: required: - pins - allOf: - - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state" - - if: - properties: - pins: - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-3])$" - then: - required: - - function - additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml index 3694795ec7938d..01a0a4a40ba577 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml @@ -4,15 +4,14 @@ $id: http://devicetree.org/schemas/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Qualcomm Technologies, Inc. Low Power Audio SubSystem (LPASS) - Low Power Island (LPI) TLMM block +title: Qualcomm SM8450 SoC LPASS LPI TLMM maintainers: - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> -description: | - This binding describes the Top Level Mode Multiplexer block found in the - LPASS LPI IP on most Qualcomm SoCs +description: + Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem + (LPASS) Low Power Island (LPI) of Qualcomm SM8450 SoC. properties: compatible: @@ -35,7 +34,7 @@ properties: gpio-controller: true - '#gpio-cells': + "#gpio-cells": description: Specifying the pin number and flags, as defined in include/dt-bindings/gpio/gpio.h const: 2 @@ -43,9 +42,17 @@ properties: gpio-ranges: maxItems: 1 -#PIN CONFIGURATION NODES patternProperties: - '-pins$': + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sm8450-lpass-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sm8450-lpass-state" + additionalProperties: false + +$defs: + qcom-sm8450-lpass-state: type: object description: Pinctrl node's client devices use subnodes for desired pin configuration. @@ -58,7 +65,7 @@ patternProperties: List of gpio pins affected by the properties specified in this subnode. items: - pattern: "^gpio([0-9]|[1-2][0-9]])$" + pattern: "^gpio([0-9]|[1-2][0-9])$" function: enum: [ swr_tx_clk, swr_tx_data, swr_rx_clk, swr_rx_data, @@ -114,7 +121,7 @@ required: - clocks - clock-names - gpio-controller - - '#gpio-cells' + - "#gpio-cells" - gpio-ranges additionalProperties: false @@ -132,4 +139,28 @@ examples: gpio-controller; #gpio-cells = <2>; gpio-ranges = <&lpi_tlmm 0 0 23>; + + wsa-swr-active-state { + clk-pins { + pins = "gpio10"; + function = "wsa_swr_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio11"; + function = "wsa_swr_data"; + drive-strength = <2>; + slew-rate = <1>; + }; + }; + + tx-swr-sleep-clk-state { + pins = "gpio0"; + function = "swr_tx_clk"; + drive-strength = <2>; + bias-pull-down; + }; }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-tlmm.yaml index 9cd97a467648ae..4a1d10d6c5e7e7 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-tlmm.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/pinctrl/qcom,sm8450-pinctrl.yaml# +$id: http://devicetree.org/schemas/pinctrl/qcom,sm8450-tlmm.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Technologies, Inc. SM8450 TLMM block @@ -9,9 +9,8 @@ title: Qualcomm Technologies, Inc. SM8450 TLMM block maintainers: - Vinod Koul <vkoul@kernel.org> -description: | - This binding describes the Top Level Mode Multiplexer (TLMM) block found - in the SM8450 platform. +description: + Top Level Mode Multiplexer pin controller in Qualcomm SM8450 SoC. allOf: - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# @@ -25,7 +24,7 @@ properties: interrupts: true interrupt-controller: true - '#interrupt-cells': true + "#interrupt-cells": true gpio-controller: true gpio-reserved-ranges: @@ -35,7 +34,7 @@ properties: gpio-line-names: maxItems: 209 - '#gpio-cells': true + "#gpio-cells": true gpio-ranges: true wakeup-parent: true @@ -46,7 +45,7 @@ required: additionalProperties: false patternProperties: - '-state$': + "-state$": oneOf: - $ref: "#/$defs/qcom-sm8450-tlmm-state" - patternProperties: @@ -60,6 +59,7 @@ $defs: description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state properties: pins: @@ -112,16 +112,6 @@ $defs: required: - pins - allOf: - - $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state" - - if: - properties: - pins: - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-9])$" - then: - required: - - function - additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml index c88c8dcb69d9cf..e1354f0c64f82a 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml @@ -65,10 +65,6 @@ additionalProperties: true $defs: qcom-tlmm-state: - allOf: - - $ref: pincfg-node.yaml# - - $ref: pinmux-node.yaml# - properties: drive-strength: enum: [2, 4, 6, 8, 10, 12, 14, 16] @@ -82,5 +78,21 @@ $defs: output-high: true output-low: true + allOf: + - $ref: pincfg-node.yaml# + - $ref: pinmux-node.yaml# + + - if: + properties: + pins: + items: + pattern: "^gpio" + then: + required: + - function + else: + properties: + function: false + additionalProperties: true ... diff --git a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml index b486f41df65f17..d6539723f354be 100644 --- a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml @@ -132,7 +132,7 @@ additionalProperties: description: Pin bank index. - minimum: 0 - maximum: 10 + maximum: 13 description: Mux 0 means GPIO and mux 1 to N means the specific device function. diff --git a/Documentation/devicetree/bindings/pinctrl/semtech,sx1501q.yaml b/Documentation/devicetree/bindings/pinctrl/semtech,sx1501q.yaml new file mode 100644 index 00000000000000..0719c03d6f4bc0 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/semtech,sx1501q.yaml @@ -0,0 +1,208 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright 2022 Linaro Ltd. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/semtech,sx1501q.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Semtech SX150x GPIO expander + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + +properties: + compatible: + enum: + - semtech,sx1501q + - semtech,sx1502q + - semtech,sx1503q + - semtech,sx1504q + - semtech,sx1505q + - semtech,sx1506q + - semtech,sx1507q + - semtech,sx1508q + - semtech,sx1509q + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#interrupt-cells': + const: 2 + + interrupt-controller: true + + '#gpio-cells': + const: 2 + + gpio-controller: true + + semtech,probe-reset: + description: Will trigger a reset of the GPIO expander on probe + type: boolean + +patternProperties: + '-cfg$': + type: object + properties: + pins: true + + bias-disable: true + bias-pull-up: true + bias-pull-down: true + bias-pull-pin-default: true + drive-push-pull: true + output-low: true + output-high: true + drive-open-drain: true + + required: + - pins + + allOf: + - $ref: "pincfg-node.yaml#" + - $ref: "pinmux-node.yaml#" + - if: + properties: + pins: + contains: + const: oscio + then: + properties: + bias-disable: false + bias-pull-up: false + bias-pull-down: false + bias-pull-pin-default: false + drive-open-drain: false + + additionalProperties: false + +required: + - compatible + - reg + - '#gpio-cells' + - gpio-controller + +allOf: + - $ref: "pinctrl.yaml#" + - if: + not: + properties: + compatible: + contains: + enum: + - semtech,sx1507q + - semtech,sx1508q + - semtech,sx1509q + then: + properties: + semtech,probe-reset: false + - if: + properties: + compatible: + contains: + enum: + - semtech,sx1501q + - semtech,sx1504q + then: + patternProperties: + '-cfg$': + properties: + pins: + items: + pattern: '^gpio[0-3]$' + - if: + properties: + compatible: + contains: + enum: + - semtech,sx1502q + - semtech,sx1505q + then: + patternProperties: + '-cfg$': + properties: + pins: + items: + pattern: '^gpio[0-7]$' + - if: + properties: + compatible: + contains: + enum: + - semtech,sx1503q + - semtech,sx1506q + then: + patternProperties: + '-cfg$': + properties: + pins: + items: + pattern: '^(gpio[0-9]|gpio1[0-5])$' + - if: + properties: + compatible: + contains: + const: semtech,sx1507q + then: + patternProperties: + '-cfg$': + properties: + pins: + items: + pattern: '^(oscio|gpio[0-3])$' + - if: + properties: + compatible: + contains: + const: semtech,sx1508q + then: + patternProperties: + '-cfg$': + properties: + pins: + items: + pattern: '^(oscio|gpio[0-7])$' + - if: + properties: + compatible: + contains: + const: semtech,sx1509q + then: + patternProperties: + '-cfg$': + properties: + pins: + items: + pattern: '^(oscio|gpio[0-9]|gpio1[0-5])$' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c@1000 { + reg = <0x1000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl@20 { + compatible = "semtech,sx1501q"; + reg = <0x20>; + + #gpio-cells = <2>; + #interrupt-cells = <2>; + + interrupts = <16 IRQ_TYPE_EDGE_FALLING>; + + gpio-controller; + interrupt-controller; + + gpio1-cfg { + pins = "gpio1"; + bias-pull-up; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml index 9d59208d83c185..eeb29b4ad4d1a1 100644 --- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml @@ -34,7 +34,9 @@ properties: const: 1 ranges: true - pins-are-numbered: true + pins-are-numbered: + $ref: /schemas/types.yaml#/definitions/flag + deprecated: true hwlocks: true interrupts: @@ -206,7 +208,6 @@ required: - '#address-cells' - '#size-cells' - ranges - - pins-are-numbered additionalProperties: false @@ -220,7 +221,6 @@ examples: #size-cells = <1>; compatible = "st,stm32f429-pinctrl"; ranges = <0 0x40020000 0x3000>; - pins-are-numbered; gpioa: gpio@0 { gpio-controller; @@ -238,7 +238,6 @@ examples: #size-cells = <1>; compatible = "st,stm32f429-pinctrl"; ranges = <0 0x50020000 0x3000>; - pins-are-numbered; gpiob: gpio@1000 { gpio-controller; diff --git a/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml index 30eaa62e1aed91..74f75f669e7787 100644 --- a/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml +++ b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml @@ -32,6 +32,9 @@ properties: - fsl,imx8qm-lpuart - fsl,imx8dxl-lpuart - const: fsl,imx8qxp-lpuart + - items: + - const: fsl,imxrt1050-lpuart + - const: fsl,imxrt1170-lpuart reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml b/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml index a4f51f46b7a1e9..716c6afcca1fa7 100644 --- a/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml +++ b/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml @@ -31,6 +31,8 @@ properties: - enum: - fsl,imx6sl-gpt - fsl,imx6sx-gpt + - fsl,imxrt1050-gpt + - fsl,imxrt1170-gpt - const: fsl,imx6dl-gpt reg: diff --git a/Documentation/driver-api/pin-control.rst b/Documentation/driver-api/pin-control.rst index 71eefe5a023fb4..0022e930e93e56 100644 --- a/Documentation/driver-api/pin-control.rst +++ b/Documentation/driver-api/pin-control.rst @@ -1238,7 +1238,7 @@ default state like this:: return PTR_ERR(foo->s); } - ret = pinctrl_select_state(foo->s); + ret = pinctrl_select_state(foo->p, foo->s); if (ret < 0) { /* FIXME: clean up "foo" here */ return ret; @@ -1399,11 +1399,11 @@ on the pins defined by group B:: if (IS_ERR(p)) ... - s1 = pinctrl_lookup_state(foo->p, "pos-A"); + s1 = pinctrl_lookup_state(p, "pos-A"); if (IS_ERR(s1)) ... - s2 = pinctrl_lookup_state(foo->p, "pos-B"); + s2 = pinctrl_lookup_state(p, "pos-B"); if (IS_ERR(s2)) ... } @@ -1411,14 +1411,14 @@ on the pins defined by group B:: foo_switch() { /* Enable on position A */ - ret = pinctrl_select_state(s1); + ret = pinctrl_select_state(p, s1); if (ret < 0) ... ... /* Enable on position B */ - ret = pinctrl_select_state(s2); + ret = pinctrl_select_state(p, s2); if (ret < 0) ... diff --git a/MAINTAINERS b/MAINTAINERS index fb2686a2534249..3900f24b4dfa55 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -12093,6 +12093,14 @@ S: Maintained F: Documentation/devicetree/bindings/hwinfo/loongson,ls2k-chipid.yaml F: drivers/soc/loongson/loongson2_guts.c +LOONGSON-2 SOC SERIES PINCTRL DRIVER +M: zhanghongchen <zhanghongchen@loongson.cn> +M: Yinbo Zhu <zhuyinbo@loongson.cn> +L: linux-gpio@vger.kernel.org +S: Maintained +F: Documentation/devicetree/bindings/pinctrl/loongson,ls2k-pinctrl.yaml +F: drivers/pinctrl/pinctrl-loongson2.c + LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI) M: Sathya Prakash <sathya.prakash@broadcom.com> M: Sreekanth Reddy <sreekanth.reddy@broadcom.com> @@ -16403,7 +16411,7 @@ M: Sean Wang <sean.wang@kernel.org> L: linux-mediatek@lists.infradead.org (moderated for non-subscribers) S: Maintained F: Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml -F: Documentation/devicetree/bindings/pinctrl/mediatek,mt6797-pinctrl.yaml +F: Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml F: Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml F: Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml F: drivers/pinctrl/mediatek/ diff --git a/drivers/gpio/gpio-arizona.c b/drivers/gpio/gpio-arizona.c index 02f9ae19cd445c..c15fda99120a9f 100644 --- a/drivers/gpio/gpio-arizona.c +++ b/drivers/gpio/gpio-arizona.c @@ -7,13 +7,12 @@ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> */ +#include <linux/gpio/driver.h> #include <linux/kernel.h> -#include <linux/slab.h> #include <linux/module.h> -#include <linux/gpio/driver.h> #include <linux/platform_device.h> #include <linux/pm_runtime.h> -#include <linux/seq_file.h> +#include <linux/slab.h> #include <linux/mfd/arizona/core.h> #include <linux/mfd/arizona/pdata.h> diff --git a/drivers/gpio/gpio-aspeed.c b/drivers/gpio/gpio-aspeed.c index 318a7d95a1a8b1..a94da80d3a95a2 100644 --- a/drivers/gpio/gpio-aspeed.c +++ b/drivers/gpio/gpio-aspeed.c @@ -5,10 +5,9 @@ * Joel Stanley <joel@jms.id.au> */ -#include <asm/div64.h> #include <linux/clk.h> -#include <linux/gpio/driver.h> #include <linux/gpio/aspeed.h> +#include <linux/gpio/driver.h> #include <linux/hashtable.h> #include <linux/init.h> #include <linux/io.h> @@ -19,6 +18,8 @@ #include <linux/spinlock.h> #include <linux/string.h> +#include <asm/div64.h> + /* * These two headers aren't meant to be used by GPIO drivers. We need * them in order to access gpio_chip_hwgpio() which we need to implement diff --git a/drivers/gpio/gpio-da9052.c b/drivers/gpio/gpio-da9052.c index 559188d80c2bd7..6f3905f1b8f5f9 100644 --- a/drivers/gpio/gpio-da9052.c +++ b/drivers/gpio/gpio-da9052.c @@ -6,17 +6,16 @@ * * Author: David Dajun Chen <dchen@diasemi.com> */ -#include <linux/module.h> #include <linux/fs.h> -#include <linux/uaccess.h> -#include <linux/platform_device.h> #include <linux/gpio/driver.h> +#include <linux/module.h> +#include <linux/platform_device.h> #include <linux/syscalls.h> -#include <linux/seq_file.h> +#include <linux/uaccess.h> #include <linux/mfd/da9052/da9052.h> -#include <linux/mfd/da9052/reg.h> #include <linux/mfd/da9052/pdata.h> +#include <linux/mfd/da9052/reg.h> #define DA9052_INPUT 1 #define DA9052_OUTPUT_OPENDRAIN 2 diff --git a/drivers/gpio/gpio-mockup.c b/drivers/gpio/gpio-mockup.c index 523dfd17dd9225..e6a7049bef6417 100644 --- a/drivers/gpio/gpio-mockup.c +++ b/drivers/gpio/gpio-mockup.c @@ -19,6 +19,7 @@ #include <linux/module.h> #include <linux/platform_device.h> #include <linux/property.h> +#include <linux/seq_file.h> #include <linux/slab.h> #include <linux/string_helpers.h> #include <linux/uaccess.h> diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c index c871602fc5ba9b..d5626c572d24ec 100644 --- a/drivers/gpio/gpio-mxc.c +++ b/drivers/gpio/gpio-mxc.c @@ -24,6 +24,12 @@ #include <linux/of_device.h> #include <linux/bug.h> +#define IMX_SCU_WAKEUP_OFF 0 +#define IMX_SCU_WAKEUP_LOW_LVL 4 +#define IMX_SCU_WAKEUP_FALL_EDGE 5 +#define IMX_SCU_WAKEUP_RISE_EDGE 6 +#define IMX_SCU_WAKEUP_HIGH_LVL 7 + /* device type dependent stuff */ struct mxc_gpio_hwdata { unsigned dr_reg; @@ -61,6 +67,9 @@ struct mxc_gpio_port { u32 both_edges; struct mxc_gpio_reg_saved gpio_saved_reg; bool power_off; + u32 wakeup_pads; + bool is_pad_wakeup; + u32 pad_type[32]; const struct mxc_gpio_hwdata *hwdata; }; @@ -130,6 +139,9 @@ static const struct of_device_id mxc_gpio_dt_ids[] = { { .compatible = "fsl,imx31-gpio", .data = &imx31_gpio_hwdata }, { .compatible = "fsl,imx35-gpio", .data = &imx35_gpio_hwdata }, { .compatible = "fsl,imx7d-gpio", .data = &imx35_gpio_hwdata }, + { .compatible = "fsl,imx8dxl-gpio", .data = &imx35_gpio_hwdata }, + { .compatible = "fsl,imx8qm-gpio", .data = &imx35_gpio_hwdata }, + { .compatible = "fsl,imx8qxp-gpio", .data = &imx35_gpio_hwdata }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, mxc_gpio_dt_ids); @@ -203,6 +215,7 @@ static int gpio_set_irq_type(struct irq_data *d, u32 type) } writel(1 << gpio_idx, port->base + GPIO_ISR); + port->pad_type[gpio_idx] = type; return 0; } @@ -254,6 +267,9 @@ static void mx3_gpio_irq_handler(struct irq_desc *desc) struct mxc_gpio_port *port = irq_desc_get_handler_data(desc); struct irq_chip *chip = irq_desc_get_chip(desc); + if (port->is_pad_wakeup) + return; + chained_irq_enter(chip, desc); irq_stat = readl(port->base + GPIO_ISR) & readl(port->base + GPIO_IMR); @@ -306,11 +322,13 @@ static int gpio_set_wake_irq(struct irq_data *d, u32 enable) ret = enable_irq_wake(port->irq_high); else ret = enable_irq_wake(port->irq); + port->wakeup_pads |= (1 << gpio_idx); } else { if (port->irq_high && (gpio_idx >= 16)) ret = disable_irq_wake(port->irq_high); else ret = disable_irq_wake(port->irq); + port->wakeup_pads &= ~(1 << gpio_idx); } return ret; @@ -365,7 +383,6 @@ static int mxc_gpio_probe(struct platform_device *pdev) return -ENOMEM; port->dev = &pdev->dev; - port->hwdata = device_get_match_data(&pdev->dev); port->base = devm_platform_ioremap_resource(pdev, 0); @@ -498,6 +515,78 @@ static void mxc_gpio_restore_regs(struct mxc_gpio_port *port) writel(port->gpio_saved_reg.dr, port->base + GPIO_DR); } +static bool mxc_gpio_generic_config(struct mxc_gpio_port *port, + unsigned int offset, unsigned long conf) +{ + struct device_node *np = port->dev->of_node; + + if (of_device_is_compatible(np, "fsl,imx8dxl-gpio") || + of_device_is_compatible(np, "fsl,imx8qxp-gpio") || + of_device_is_compatible(np, "fsl,imx8qm-gpio")) + return (gpiochip_generic_config(&port->gc, offset, conf) == 0); + + return false; +} + +static bool mxc_gpio_set_pad_wakeup(struct mxc_gpio_port *port, bool enable) +{ + unsigned long config; + bool ret = false; + int i, type; + + static const u32 pad_type_map[] = { + IMX_SCU_WAKEUP_OFF, /* 0 */ + IMX_SCU_WAKEUP_RISE_EDGE, /* IRQ_TYPE_EDGE_RISING */ + IMX_SCU_WAKEUP_FALL_EDGE, /* IRQ_TYPE_EDGE_FALLING */ + IMX_SCU_WAKEUP_FALL_EDGE, /* IRQ_TYPE_EDGE_BOTH */ + IMX_SCU_WAKEUP_HIGH_LVL, /* IRQ_TYPE_LEVEL_HIGH */ + IMX_SCU_WAKEUP_OFF, /* 5 */ + IMX_SCU_WAKEUP_OFF, /* 6 */ + IMX_SCU_WAKEUP_OFF, /* 7 */ + IMX_SCU_WAKEUP_LOW_LVL, /* IRQ_TYPE_LEVEL_LOW */ + }; + + for (i = 0; i < 32; i++) { + if ((port->wakeup_pads & (1 << i))) { + type = port->pad_type[i]; + if (enable) + config = pad_type_map[type]; + else + config = IMX_SCU_WAKEUP_OFF; + ret |= mxc_gpio_generic_config(port, i, config); + } + } + + return ret; +} + +static int __maybe_unused mxc_gpio_noirq_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct mxc_gpio_port *port = platform_get_drvdata(pdev); + + if (port->wakeup_pads > 0) + port->is_pad_wakeup = mxc_gpio_set_pad_wakeup(port, true); + + return 0; +} + +static int __maybe_unused mxc_gpio_noirq_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct mxc_gpio_port *port = platform_get_drvdata(pdev); + + if (port->wakeup_pads > 0) + mxc_gpio_set_pad_wakeup(port, false); + port->is_pad_wakeup = false; + + return 0; +} + +static const struct dev_pm_ops mxc_gpio_dev_pm_ops = { + SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(mxc_gpio_noirq_suspend, mxc_gpio_noirq_resume) +}; + static int mxc_gpio_syscore_suspend(void) { struct mxc_gpio_port *port; @@ -537,6 +626,7 @@ static struct platform_driver mxc_gpio_driver = { .name = "gpio-mxc", .of_match_table = mxc_gpio_dt_ids, .suppress_bind_attrs = true, + .pm = &mxc_gpio_dev_pm_ops, }, .probe = mxc_gpio_probe, }; diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c index ebe1943b85dd99..6e67867e1dcd48 100644 --- a/drivers/gpio/gpio-pca953x.c +++ b/drivers/gpio/gpio-pca953x.c @@ -10,8 +10,8 @@ #include <linux/acpi.h> #include <linux/bitmap.h> -#include <linux/gpio/driver.h> #include <linux/gpio/consumer.h> +#include <linux/gpio/driver.h> #include <linux/i2c.h> #include <linux/init.h> #include <linux/interrupt.h> @@ -20,6 +20,7 @@ #include <linux/platform_data/pca953x.h> #include <linux/regmap.h> #include <linux/regulator/consumer.h> +#include <linux/seq_file.h> #include <linux/slab.h> #include <asm/unaligned.h> diff --git a/drivers/gpio/gpio-pl061.c b/drivers/gpio/gpio-pl061.c index 6464056cb6ae52..9fc1f3dd4190df 100644 --- a/drivers/gpio/gpio-pl061.c +++ b/drivers/gpio/gpio-pl061.c @@ -8,22 +8,23 @@ * * Data sheet: ARM DDI 0190B, September 2000 */ -#include <linux/spinlock.h> +#include <linux/amba/bus.h> +#include <linux/bitops.h> +#include <linux/device.h> #include <linux/errno.h> +#include <linux/gpio/driver.h> #include <linux/init.h> +#include <linux/interrupt.h> #include <linux/io.h> #include <linux/ioport.h> -#include <linux/interrupt.h> #include <linux/irq.h> #include <linux/irqchip/chained_irq.h> #include <linux/module.h> -#include <linux/bitops.h> -#include <linux/gpio/driver.h> -#include <linux/device.h> -#include <linux/amba/bus.h> -#include <linux/slab.h> #include <linux/pinctrl/consumer.h> #include <linux/pm.h> +#include <linux/seq_file.h> +#include <linux/slab.h> +#include <linux/spinlock.h> #define GPIODIR 0x400 #define GPIOIS 0x404 diff --git a/drivers/gpio/gpio-tegra186.c b/drivers/gpio/gpio-tegra186.c index 54d9fa7da9c1ea..fdc5bdcd56384c 100644 --- a/drivers/gpio/gpio-tegra186.c +++ b/drivers/gpio/gpio-tegra186.c @@ -7,12 +7,13 @@ */ #include <linux/gpio/driver.h> +#include <linux/hte.h> #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/module.h> #include <linux/of_device.h> #include <linux/platform_device.h> -#include <linux/hte.h> +#include <linux/seq_file.h> #include <dt-bindings/gpio/tegra186-gpio.h> #include <dt-bindings/gpio/tegra194-gpio.h> diff --git a/drivers/gpio/gpio-wm8350.c b/drivers/gpio/gpio-wm8350.c index b1b131fb9804c5..2421cf606ed6fd 100644 --- a/drivers/gpio/gpio-wm8350.c +++ b/drivers/gpio/gpio-wm8350.c @@ -8,13 +8,12 @@ * */ -#include <linux/kernel.h> -#include <linux/slab.h> -#include <linux/module.h> #include <linux/gpio/driver.h> +#include <linux/kernel.h> #include <linux/mfd/core.h> +#include <linux/module.h> #include <linux/platform_device.h> -#include <linux/seq_file.h> +#include <linux/slab.h> #include <linux/mfd/wm8350/core.h> #include <linux/mfd/wm8350/gpio.h> diff --git a/drivers/gpio/gpiolib-acpi.h b/drivers/gpio/gpiolib-acpi.h index 1ac6816839dbce..01e0cb480a00cf 100644 --- a/drivers/gpio/gpiolib-acpi.h +++ b/drivers/gpio/gpiolib-acpi.h @@ -8,7 +8,19 @@ #ifndef GPIOLIB_ACPI_H #define GPIOLIB_ACPI_H +#include <linux/err.h> +#include <linux/errno.h> +#include <linux/types.h> + +#include <linux/gpio/consumer.h> + struct acpi_device; +struct device; +struct fwnode_handle; + +struct gpio_chip; +struct gpio_desc; +struct gpio_device; /** * struct acpi_gpio_info - ACPI GPIO specific information diff --git a/drivers/gpio/gpiolib-cdev.c b/drivers/gpio/gpiolib-cdev.c index 0cb6b468f364f9..65b2c09a4576a1 100644 --- a/drivers/gpio/gpiolib-cdev.c +++ b/drivers/gpio/gpiolib-cdev.c @@ -12,6 +12,7 @@ #include <linux/file.h> #include <linux/gpio.h> #include <linux/gpio/driver.h> +#include <linux/hte.h> #include <linux/interrupt.h> #include <linux/irqreturn.h> #include <linux/kernel.h> @@ -20,11 +21,12 @@ #include <linux/mutex.h> #include <linux/pinctrl/consumer.h> #include <linux/poll.h> +#include <linux/seq_file.h> #include <linux/spinlock.h> #include <linux/timekeeping.h> #include <linux/uaccess.h> #include <linux/workqueue.h> -#include <linux/hte.h> + #include <uapi/linux/gpio.h> #include "gpiolib.h" diff --git a/drivers/gpio/gpiolib-of.h b/drivers/gpio/gpiolib-of.h index 8af2bc899aab25..1b5df39a952e07 100644 --- a/drivers/gpio/gpiolib-of.h +++ b/drivers/gpio/gpiolib-of.h @@ -3,8 +3,17 @@ #ifndef GPIOLIB_OF_H #define GPIOLIB_OF_H +#include <linux/err.h> +#include <linux/errno.h> +#include <linux/types.h> + +#include <linux/notifier.h> + +struct device; + struct gpio_chip; -enum of_gpio_flags; +struct gpio_desc; +struct gpio_device; #ifdef CONFIG_OF_GPIO struct gpio_desc *of_find_gpio(struct device *dev, diff --git a/drivers/gpio/gpiolib-sysfs.h b/drivers/gpio/gpiolib-sysfs.h index ddd0e503f8eb97..0f213bdb473246 100644 --- a/drivers/gpio/gpiolib-sysfs.h +++ b/drivers/gpio/gpiolib-sysfs.h @@ -5,6 +5,8 @@ #ifdef CONFIG_GPIO_SYSFS +struct gpio_device; + int gpiochip_sysfs_register(struct gpio_device *gdev); void gpiochip_sysfs_unregister(struct gpio_device *gdev); diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index f71fefff400f5d..7d5f5458c72ed2 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -258,6 +258,17 @@ config PINCTRL_FALCON depends on SOC_FALCON depends on PINCTRL_LANTIQ +config PINCTRL_LOONGSON2 + tristate "Pinctrl driver for the Loongson-2 SoC" + depends on OF && (LOONGARCH || COMPILE_TEST) + select PINMUX + select GENERIC_PINCONF + help + This selects pin control driver for the Loongson-2 SoC. It + provides pin config functions multiplexing. GPIO pin pull-up, + pull-down functions are not supported. Say yes to enable + pinctrl for Loongson-2 SoC. + config PINCTRL_XWAY bool depends on SOC_TYPE_XWAY diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile index 89bfa01b5231ad..d5939840bb2ad5 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -28,6 +28,7 @@ obj-$(CONFIG_PINCTRL_K210) += pinctrl-k210.o obj-$(CONFIG_PINCTRL_KEEMBAY) += pinctrl-keembay.o obj-$(CONFIG_PINCTRL_LANTIQ) += pinctrl-lantiq.o obj-$(CONFIG_PINCTRL_FALCON) += pinctrl-falcon.o +obj-$(CONFIG_PINCTRL_LOONGSON2) += pinctrl-loongson2.o obj-$(CONFIG_PINCTRL_XWAY) += pinctrl-xway.o obj-$(CONFIG_PINCTRL_LPC18XX) += pinctrl-lpc18xx.o obj-$(CONFIG_PINCTRL_MAX77620) += pinctrl-max77620.o diff --git a/drivers/pinctrl/actions/pinctrl-owl.c b/drivers/pinctrl/actions/pinctrl-owl.c index ed46abc15d720e..d49b77dcfcff16 100644 --- a/drivers/pinctrl/actions/pinctrl-owl.c +++ b/drivers/pinctrl/actions/pinctrl-owl.c @@ -17,13 +17,15 @@ #include <linux/module.h> #include <linux/of.h> #include <linux/platform_device.h> +#include <linux/seq_file.h> +#include <linux/slab.h> +#include <linux/spinlock.h> + #include <linux/pinctrl/machine.h> +#include <linux/pinctrl/pinconf-generic.h> +#include <linux/pinctrl/pinconf.h> #include <linux/pinctrl/pinctrl.h> #include <linux/pinctrl/pinmux.h> -#include <linux/pinctrl/pinconf.h> -#include <linux/pinctrl/pinconf-generic.h> -#include <linux/slab.h> -#include <linux/spinlock.h> #include "../core.h" #include "../pinctrl-utils.h" @@ -38,7 +40,6 @@ * @clk: clock control * @soc: reference to soc_data * @base: pinctrl register base address - * @irq_chip: IRQ chip information * @num_irq: number of possible interrupts * @irq: interrupt numbers */ @@ -50,7 +51,6 @@ struct owl_pinctrl { struct clk *clk; const struct owl_pinctrl_soc_data *soc; void __iomem *base; - struct irq_chip irq_chip; unsigned int num_irq; unsigned int *irq; }; @@ -722,10 +722,11 @@ static void owl_gpio_irq_mask(struct irq_data *data) { struct gpio_chip *gc = irq_data_get_irq_chip_data(data); struct owl_pinctrl *pctrl = gpiochip_get_data(gc); + irq_hw_number_t hwirq = irqd_to_hwirq(data); const struct owl_gpio_port *port; + unsigned int gpio = hwirq; void __iomem *gpio_base; unsigned long flags; - unsigned int gpio = data->hwirq; u32 val; port = owl_gpio_get_port(pctrl, &gpio); @@ -745,22 +746,27 @@ static void owl_gpio_irq_mask(struct irq_data *data) OWL_GPIO_CTLR_ENABLE + port->shared_ctl_offset * 5, false); raw_spin_unlock_irqrestore(&pctrl->lock, flags); + + gpiochip_disable_irq(gc, hwirq); } static void owl_gpio_irq_unmask(struct irq_data *data) { struct gpio_chip *gc = irq_data_get_irq_chip_data(data); struct owl_pinctrl *pctrl = gpiochip_get_data(gc); + irq_hw_number_t hwirq = irqd_to_hwirq(data); const struct owl_gpio_port *port; + unsigned int gpio = hwirq; void __iomem *gpio_base; unsigned long flags; - unsigned int gpio = data->hwirq; u32 value; port = owl_gpio_get_port(pctrl, &gpio); if (WARN_ON(port == NULL)) return; + gpiochip_enable_irq(gc, hwirq); + gpio_base = pctrl->base + port->offset; raw_spin_lock_irqsave(&pctrl->lock, flags); @@ -780,20 +786,21 @@ static void owl_gpio_irq_ack(struct irq_data *data) { struct gpio_chip *gc = irq_data_get_irq_chip_data(data); struct owl_pinctrl *pctrl = gpiochip_get_data(gc); + irq_hw_number_t hwirq = irqd_to_hwirq(data); const struct owl_gpio_port *port; + unsigned int gpio = hwirq; void __iomem *gpio_base; unsigned long flags; - unsigned int gpio = data->hwirq; /* * Switch the interrupt edge to the opposite edge of the interrupt * which got triggered for the case of emulating both edges */ if (irqd_get_trigger_type(data) == IRQ_TYPE_EDGE_BOTH) { - if (owl_gpio_get(gc, gpio)) - irq_set_type(pctrl, gpio, IRQ_TYPE_EDGE_FALLING); + if (owl_gpio_get(gc, hwirq)) + irq_set_type(pctrl, hwirq, IRQ_TYPE_EDGE_FALLING); else - irq_set_type(pctrl, gpio, IRQ_TYPE_EDGE_RISING); + irq_set_type(pctrl, hwirq, IRQ_TYPE_EDGE_RISING); } port = owl_gpio_get_port(pctrl, &gpio); @@ -825,6 +832,16 @@ static int owl_gpio_irq_set_type(struct irq_data *data, unsigned int type) return 0; } +static const struct irq_chip owl_gpio_irqchip = { + .name = "owl-irq", + .irq_ack = owl_gpio_irq_ack, + .irq_mask = owl_gpio_irq_mask, + .irq_unmask = owl_gpio_irq_unmask, + .irq_set_type = owl_gpio_irq_set_type, + .flags = IRQCHIP_IMMUTABLE, + GPIOCHIP_IRQ_RESOURCE_HELPERS, +}; + static void owl_gpio_irq_handler(struct irq_desc *desc) { struct owl_pinctrl *pctrl = irq_desc_get_handler_data(desc); @@ -875,14 +892,8 @@ static int owl_gpio_init(struct owl_pinctrl *pctrl) chip->parent = pctrl->dev; chip->owner = THIS_MODULE; - pctrl->irq_chip.name = chip->of_node->name; - pctrl->irq_chip.irq_ack = owl_gpio_irq_ack; - pctrl->irq_chip.irq_mask = owl_gpio_irq_mask; - pctrl->irq_chip.irq_unmask = owl_gpio_irq_unmask; - pctrl->irq_chip.irq_set_type = owl_gpio_irq_set_type; - gpio_irq = &chip->irq; - gpio_irq->chip = &pctrl->irq_chip; + gpio_irq_chip_set_chip(gpio_irq, &owl_gpio_irqchip); gpio_irq->handler = handle_simple_irq; gpio_irq->default_type = IRQ_TYPE_NONE; gpio_irq->parent_handler = owl_gpio_irq_handler; diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed.c b/drivers/pinctrl/aspeed/pinctrl-aspeed.c index a30912a92f057d..3945612900e6da 100644 --- a/drivers/pinctrl/aspeed/pinctrl-aspeed.c +++ b/drivers/pinctrl/aspeed/pinctrl-aspeed.c @@ -5,6 +5,7 @@ #include <linux/mfd/syscon.h> #include <linux/platform_device.h> +#include <linux/seq_file.h> #include <linux/slab.h> #include <linux/string.h> #include "../core.h" diff --git a/drivers/pinctrl/bcm/pinctrl-bcm281xx.c b/drivers/pinctrl/bcm/pinctrl-bcm281xx.c index fd52a83387ef72..73dbf29c002f39 100644 --- a/drivers/pinctrl/bcm/pinctrl-bcm281xx.c +++ b/drivers/pinctrl/bcm/pinctrl-bcm281xx.c @@ -2,16 +2,19 @@ // Copyright (C) 2013-2017 Broadcom #include <linux/err.h> -#include <linux/io.h> #include <linux/init.h> +#include <linux/io.h> #include <linux/of.h> #include <linux/platform_device.h> -#include <linux/pinctrl/pinctrl.h> -#include <linux/pinctrl/pinmux.h> -#include <linux/pinctrl/pinconf.h> -#include <linux/pinctrl/pinconf-generic.h> #include <linux/regmap.h> +#include <linux/seq_file.h> #include <linux/slab.h> + +#include <linux/pinctrl/pinconf-generic.h> +#include <linux/pinctrl/pinconf.h> +#include <linux/pinctrl/pinctrl.h> +#include <linux/pinctrl/pinmux.h> + #include "../core.h" #include "../pinctrl-utils.h" diff --git a/drivers/pinctrl/bcm/pinctrl-cygnus-mux.c b/drivers/pinctrl/bcm/pinctrl-cygnus-mux.c index 5251460f632798..bf9597800954af 100644 --- a/drivers/pinctrl/bcm/pinctrl-cygnus-mux.c +++ b/drivers/pinctrl/bcm/pinctrl-cygnus-mux.c @@ -13,12 +13,15 @@ #include <linux/err.h> #include <linux/io.h> #include <linux/of.h> -#include <linux/slab.h> #include <linux/platform_device.h> +#include <linux/seq_file.h> +#include <linux/slab.h> + +#include <linux/pinctrl/pinconf-generic.h> +#include <linux/pinctrl/pinconf.h> #include <linux/pinctrl/pinctrl.h> #include <linux/pinctrl/pinmux.h> -#include <linux/pinctrl/pinconf.h> -#include <linux/pinctrl/pinconf-generic.h> + #include "../core.h" #include "../pinctrl-utils.h" diff --git a/drivers/pinctrl/bcm/pinctrl-iproc-gpio.c b/drivers/pinctrl/bcm/pinctrl-iproc-gpio.c index 52fa2f4cd618f8..3df56a4ea510cd 100644 --- a/drivers/pinctrl/bcm/pinctrl-iproc-gpio.c +++ b/drivers/pinctrl/bcm/pinctrl-iproc-gpio.c @@ -16,17 +16,19 @@ * SoCs IOMUX controller. */ -#include <linux/kernel.h> -#include <linux/slab.h> +#include <linux/gpio/driver.h> #include <linux/interrupt.h> #include <linux/io.h> -#include <linux/gpio/driver.h> #include <linux/ioport.h> +#include <linux/kernel.h> #include <linux/of_device.h> #include <linux/of_irq.h> -#include <linux/pinctrl/pinctrl.h> -#include <linux/pinctrl/pinconf.h> +#include <linux/slab.h> + +#include <linux/pinctrl/consumer.h> #include <linux/pinctrl/pinconf-generic.h> +#include <linux/pinctrl/pinconf.h> +#include <linux/pinctrl/pinctrl.h> #include "../pinctrl-utils.h" diff --git a/drivers/pinctrl/bcm/pinctrl-ns2-mux.c b/drivers/pinctrl/bcm/pinctrl-ns2-mux.c index 960e253f0be476..04f4fca854cc05 100644 --- a/drivers/pinctrl/bcm/pinctrl-ns2-mux.c +++ b/drivers/pinctrl/bcm/pinctrl-ns2-mux.c @@ -9,12 +9,14 @@ #include <linux/err.h> #include <linux/io.h> #include <linux/of.h> -#include <linux/pinctrl/pinconf.h> +#include <linux/platform_device.h> +#include <linux/seq_file.h> +#include <linux/slab.h> + #include <linux/pinctrl/pinconf-generic.h> +#include <linux/pinctrl/pinconf.h> #include <linux/pinctrl/pinctrl.h> #include <linux/pinctrl/pinmux.h> -#include <linux/platform_device.h> -#include <linux/slab.h> #include "../core.h" #include "../pinctrl-utils.h" diff --git a/drivers/pinctrl/bcm/pinctrl-nsp-mux.c b/drivers/pinctrl/bcm/pinctrl-nsp-mux.c index db8f79920ff0dd..eb6298507c1d18 100644 --- a/drivers/pinctrl/bcm/pinctrl-nsp-mux.c +++ b/drivers/pinctrl/bcm/pinctrl-nsp-mux.c @@ -20,12 +20,14 @@ #include <linux/err.h> #include <linux/io.h> #include <linux/of.h> -#include <linux/pinctrl/pinconf.h> +#include <linux/platform_device.h> +#include <linux/seq_file.h> +#include <linux/slab.h> + #include <linux/pinctrl/pinconf-generic.h> +#include <linux/pinctrl/pinconf.h> #include <linux/pinctrl/pinctrl.h> #include <linux/pinctrl/pinmux.h> -#include <linux/platform_device.h> -#include <linux/slab.h> #include "../core.h" #include "../pinctrl-utils.h" diff --git a/drivers/pinctrl/cirrus/pinctrl-lochnagar.c b/drivers/pinctrl/cirrus/pinctrl-lochnagar.c index 3fda4446d70ba7..0b78cf611afe00 100644 --- a/drivers/pinctrl/cirrus/pinctrl-lochnagar.c +++ b/drivers/pinctrl/cirrus/pinctrl-lochnagar.c @@ -15,10 +15,12 @@ #include <linux/of.h> #include <linux/platform_device.h> #include <linux/regmap.h> + +#include <linux/pinctrl/consumer.h> +#include <linux/pinctrl/pinconf-generic.h> +#include <linux/pinctrl/pinconf.h> #include <linux/pinctrl/pinctrl.h> #include <linux/pinctrl/pinmux.h> -#include <linux/pinctrl/pinconf.h> -#include <linux/pinctrl/pinconf-generic.h> #include <linux/mfd/lochnagar.h> #include <linux/mfd/lochnagar1_regs.h> diff --git a/drivers/pinctrl/cirrus/pinctrl-madera-core.c b/drivers/pinctrl/cirrus/pinctrl-madera-core.c index e1cfbee3643af0..bb589922d8c518 100644 --- a/drivers/pinctrl/cirrus/pinctrl-madera-core.c +++ b/drivers/pinctrl/cirrus/pinctrl-madera-core.c @@ -10,13 +10,14 @@ #include <linux/platform_device.h> #include <linux/property.h> #include <linux/regmap.h> +#include <linux/seq_file.h> #include <linux/slab.h> #include <linux/pinctrl/machine.h> +#include <linux/pinctrl/pinconf-generic.h> +#include <linux/pinctrl/pinconf.h> #include <linux/pinctrl/pinctrl.h> #include <linux/pinctrl/pinmux.h> -#include <linux/pinctrl/pinconf.h> -#include <linux/pinctrl/pinconf-generic.h> #include <linux/mfd/madera/core.h> #include <linux/mfd/madera/registers.h> diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c index 9e57f4c62e609c..41fd847387071d 100644 --- a/drivers/pinctrl/core.c +++ b/drivers/pinctrl/core.c @@ -12,19 +12,21 @@ */ #define pr_fmt(fmt) "pinctrl core: " fmt -#include <linux/kernel.h> -#include <linux/kref.h> -#include <linux/export.h> -#include <linux/init.h> +#include <linux/debugfs.h> #include <linux/device.h> -#include <linux/slab.h> #include <linux/err.h> +#include <linux/export.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/kref.h> #include <linux/list.h> -#include <linux/debugfs.h> #include <linux/seq_file.h> +#include <linux/slab.h> + #include <linux/pinctrl/consumer.h> -#include <linux/pinctrl/pinctrl.h> +#include <linux/pinctrl/devinfo.h> #include <linux/pinctrl/machine.h> +#include <linux/pinctrl/pinctrl.h> #ifdef CONFIG_GPIOLIB #include "../gpio/gpiolib.h" @@ -33,9 +35,8 @@ #include "core.h" #include "devicetree.h" -#include "pinmux.h" #include "pinconf.h" - +#include "pinmux.h" static bool pinctrl_dummy_state; @@ -1028,7 +1029,6 @@ static struct pinctrl *create_pinctrl(struct device *dev, struct pinctrl *p; const char *devname; struct pinctrl_maps *maps_node; - int i; const struct pinctrl_map *map; int ret; @@ -1054,7 +1054,7 @@ static struct pinctrl *create_pinctrl(struct device *dev, mutex_lock(&pinctrl_maps_mutex); /* Iterate over the pin control maps to locate the right ones */ - for_each_maps(maps_node, i, map) { + for_each_pin_map(maps_node, map) { /* Map must be for this device */ if (strcmp(map->dev_name, devname)) continue; @@ -1805,13 +1805,12 @@ static inline const char *map_type(enum pinctrl_map_type type) static int pinctrl_maps_show(struct seq_file *s, void *what) { struct pinctrl_maps *maps_node; - int i; const struct pinctrl_map *map; seq_puts(s, "Pinctrl maps:\n"); mutex_lock(&pinctrl_maps_mutex); - for_each_maps(maps_node, i, map) { + for_each_pin_map(maps_node, map) { seq_printf(s, "device %s\nstate %s\ntype %s (%d)\n", map->dev_name, map->name, map_type(map->type), map->type); diff --git a/drivers/pinctrl/core.h b/drivers/pinctrl/core.h index 840103c40c14ad..530370443c191f 100644 --- a/drivers/pinctrl/core.h +++ b/drivers/pinctrl/core.h @@ -9,12 +9,22 @@ */ #include <linux/kref.h> +#include <linux/list.h> #include <linux/mutex.h> #include <linux/radix-tree.h> -#include <linux/pinctrl/pinconf.h> +#include <linux/types.h> + #include <linux/pinctrl/machine.h> +struct dentry; +struct device; +struct device_node; +struct module; + +struct pinctrl; +struct pinctrl_desc; struct pinctrl_gpio_range; +struct pinctrl_state; /** * struct pinctrl_dev - pin control class device @@ -242,8 +252,8 @@ extern int pinctrl_force_default(struct pinctrl_dev *pctldev); extern struct mutex pinctrl_maps_mutex; extern struct list_head pinctrl_maps; -#define for_each_maps(_maps_node_, _i_, _map_) \ - list_for_each_entry(_maps_node_, &pinctrl_maps, node) \ - for (_i_ = 0, _map_ = &_maps_node_->maps[_i_]; \ - _i_ < _maps_node_->num_maps; \ - _i_++, _map_ = &_maps_node_->maps[_i_]) +#define for_each_pin_map(_maps_node_, _map_) \ + list_for_each_entry(_maps_node_, &pinctrl_maps, node) \ + for (unsigned int __i = 0; \ + __i < _maps_node_->num_maps && (_map_ = &_maps_node_->maps[__i]); \ + __i++) diff --git a/drivers/pinctrl/devicetree.h b/drivers/pinctrl/devicetree.h index efa80779de4f45..def76aba99d17c 100644 --- a/drivers/pinctrl/devicetree.h +++ b/drivers/pinctrl/devicetree.h @@ -5,8 +5,14 @@ * Copyright (C) 2012 NVIDIA CORPORATION. All rights reserved. */ +#include <linux/errno.h> + +struct device_node; struct of_phandle_args; +struct pinctrl; +struct pinctrl_dev; + #ifdef CONFIG_OF void pinctrl_dt_free_maps(struct pinctrl *p); diff --git a/drivers/pinctrl/freescale/pinctrl-imx.c b/drivers/pinctrl/freescale/pinctrl-imx.c index 3a7d2de10b13c4..e9aef764138fb3 100644 --- a/drivers/pinctrl/freescale/pinctrl-imx.c +++ b/drivers/pinctrl/freescale/pinctrl-imx.c @@ -13,14 +13,16 @@ #include <linux/mfd/syscon.h> #include <linux/module.h> #include <linux/of.h> -#include <linux/of_device.h> #include <linux/of_address.h> +#include <linux/of_device.h> +#include <linux/regmap.h> +#include <linux/seq_file.h> +#include <linux/slab.h> + #include <linux/pinctrl/machine.h> #include <linux/pinctrl/pinconf.h> #include <linux/pinctrl/pinctrl.h> #include <linux/pinctrl/pinmux.h> -#include <linux/slab.h> -#include <linux/regmap.h> #include "../core.h" #include "../pinconf.h" diff --git a/drivers/pinctrl/freescale/pinctrl-imx1-core.c b/drivers/pinctrl/freescale/pinctrl-imx1-core.c index 70186448d2f4ac..3726c0ac25608f 100644 --- a/drivers/pinctrl/freescale/pinctrl-imx1-core.c +++ b/drivers/pinctrl/freescale/pinctrl-imx1-core.c @@ -16,11 +16,13 @@ #include <linux/io.h> #include <linux/of.h> #include <linux/of_device.h> +#include <linux/seq_file.h> +#include <linux/slab.h> + #include <linux/pinctrl/machine.h> #include <linux/pinctrl/pinconf.h> #include <linux/pinctrl/pinctrl.h> #include <linux/pinctrl/pinmux.h> -#include <linux/slab.h> #include "../core.h" #include "pinctrl-imx1.h" diff --git a/drivers/pinctrl/freescale/pinctrl-imxrt1050.c b/drivers/pinctrl/freescale/pinctrl-imxrt1050.c index 11f31c90ad3028..def683839ebeaa 100644 --- a/drivers/pinctrl/freescale/pinctrl-imxrt1050.c +++ b/drivers/pinctrl/freescale/pinctrl-imxrt1050.c @@ -13,155 +13,135 @@ #include "pinctrl-imx.h" enum imxrt1050_pads { - IMXRT1050_PAD_RESERVE0 = 0, - IMXRT1050_PAD_RESERVE1 = 1, - IMXRT1050_PAD_RESERVE2 = 2, - IMXRT1050_PAD_RESERVE3 = 3, - IMXRT1050_PAD_RESERVE4 = 4, - IMXRT1050_PAD_RESERVE5 = 5, - IMXRT1050_PAD_RESERVE6 = 6, - IMXRT1050_PAD_RESERVE7 = 7, - IMXRT1050_PAD_RESERVE8 = 8, - IMXRT1050_PAD_RESERVE9 = 9, - IMXRT1050_IOMUXC_GPIO1_IO00 = 10, - IMXRT1050_IOMUXC_GPIO1_IO01 = 11, - IMXRT1050_IOMUXC_GPIO1_IO02 = 12, - IMXRT1050_IOMUXC_GPIO1_IO03 = 13, - IMXRT1050_IOMUXC_GPIO1_IO04 = 14, - IMXRT1050_IOMUXC_GPIO1_IO05 = 15, - IMXRT1050_IOMUXC_GPIO1_IO06 = 16, - IMXRT1050_IOMUXC_GPIO1_IO07 = 17, - IMXRT1050_IOMUXC_GPIO1_IO08 = 18, - IMXRT1050_IOMUXC_GPIO1_IO09 = 19, - IMXRT1050_IOMUXC_GPIO1_IO10 = 20, - IMXRT1050_IOMUXC_GPIO1_IO11 = 21, - IMXRT1050_IOMUXC_GPIO1_IO12 = 22, - IMXRT1050_IOMUXC_GPIO1_IO13 = 23, - IMXRT1050_IOMUXC_GPIO1_IO14 = 24, - IMXRT1050_IOMUXC_GPIO1_IO15 = 25, - IMXRT1050_IOMUXC_ENET_MDC = 26, - IMXRT1050_IOMUXC_ENET_MDIO = 27, - IMXRT1050_IOMUXC_ENET_TD3 = 28, - IMXRT1050_IOMUXC_ENET_TD2 = 29, - IMXRT1050_IOMUXC_ENET_TD1 = 30, - IMXRT1050_IOMUXC_ENET_TD0 = 31, - IMXRT1050_IOMUXC_ENET_TX_CTL = 32, - IMXRT1050_IOMUXC_ENET_TXC = 33, - IMXRT1050_IOMUXC_ENET_RX_CTL = 34, - IMXRT1050_IOMUXC_ENET_RXC = 35, - IMXRT1050_IOMUXC_ENET_RD0 = 36, - IMXRT1050_IOMUXC_ENET_RD1 = 37, - IMXRT1050_IOMUXC_ENET_RD2 = 38, - IMXRT1050_IOMUXC_ENET_RD3 = 39, - IMXRT1050_IOMUXC_SD1_CLK = 40, - IMXRT1050_IOMUXC_SD1_CMD = 41, - IMXRT1050_IOMUXC_SD1_DATA0 = 42, - IMXRT1050_IOMUXC_SD1_DATA1 = 43, - IMXRT1050_IOMUXC_SD1_DATA2 = 44, - IMXRT1050_IOMUXC_SD1_DATA3 = 45, - IMXRT1050_IOMUXC_SD1_DATA4 = 46, - IMXRT1050_IOMUXC_SD1_DATA5 = 47, - IMXRT1050_IOMUXC_SD1_DATA6 = 48, - IMXRT1050_IOMUXC_SD1_DATA7 = 49, - IMXRT1050_IOMUXC_SD1_RESET_B = 50, - IMXRT1050_IOMUXC_SD1_STROBE = 51, - IMXRT1050_IOMUXC_SD2_CD_B = 52, - IMXRT1050_IOMUXC_SD2_CLK = 53, - IMXRT1050_IOMUXC_SD2_CMD = 54, - IMXRT1050_IOMUXC_SD2_DATA0 = 55, - IMXRT1050_IOMUXC_SD2_DATA1 = 56, - IMXRT1050_IOMUXC_SD2_DATA2 = 57, - IMXRT1050_IOMUXC_SD2_DATA3 = 58, - IMXRT1050_IOMUXC_SD2_RESET_B = 59, - IMXRT1050_IOMUXC_SD2_WP = 60, - IMXRT1050_IOMUXC_NAND_ALE = 61, - IMXRT1050_IOMUXC_NAND_CE0 = 62, - IMXRT1050_IOMUXC_NAND_CE1 = 63, - IMXRT1050_IOMUXC_NAND_CE2 = 64, - IMXRT1050_IOMUXC_NAND_CE3 = 65, - IMXRT1050_IOMUXC_NAND_CLE = 66, - IMXRT1050_IOMUXC_NAND_DATA00 = 67, - IMXRT1050_IOMUXC_NAND_DATA01 = 68, - IMXRT1050_IOMUXC_NAND_DATA02 = 69, - IMXRT1050_IOMUXC_NAND_DATA03 = 70, - IMXRT1050_IOMUXC_NAND_DATA04 = 71, - IMXRT1050_IOMUXC_NAND_DATA05 = 72, - IMXRT1050_IOMUXC_NAND_DATA06 = 73, - IMXRT1050_IOMUXC_NAND_DATA07 = 74, - IMXRT1050_IOMUXC_NAND_DQS = 75, - IMXRT1050_IOMUXC_NAND_RE_B = 76, - IMXRT1050_IOMUXC_NAND_READY_B = 77, - IMXRT1050_IOMUXC_NAND_WE_B = 78, - IMXRT1050_IOMUXC_NAND_WP_B = 79, - IMXRT1050_IOMUXC_SAI5_RXFS = 80, - IMXRT1050_IOMUXC_SAI5_RXC = 81, - IMXRT1050_IOMUXC_SAI5_RXD0 = 82, - IMXRT1050_IOMUXC_SAI5_RXD1 = 83, - IMXRT1050_IOMUXC_SAI5_RXD2 = 84, - IMXRT1050_IOMUXC_SAI5_RXD3 = 85, - IMXRT1050_IOMUXC_SAI5_MCLK = 86, - IMXRT1050_IOMUXC_SAI1_RXFS = 87, - IMXRT1050_IOMUXC_SAI1_RXC = 88, - IMXRT1050_IOMUXC_SAI1_RXD0 = 89, - IMXRT1050_IOMUXC_SAI1_RXD1 = 90, - IMXRT1050_IOMUXC_SAI1_RXD2 = 91, - IMXRT1050_IOMUXC_SAI1_RXD3 = 92, - IMXRT1050_IOMUXC_SAI1_RXD4 = 93, - IMXRT1050_IOMUXC_SAI1_RXD5 = 94, - IMXRT1050_IOMUXC_SAI1_RXD6 = 95, - IMXRT1050_IOMUXC_SAI1_RXD7 = 96, - IMXRT1050_IOMUXC_SAI1_TXFS = 97, - IMXRT1050_IOMUXC_SAI1_TXC = 98, - IMXRT1050_IOMUXC_SAI1_TXD0 = 99, - IMXRT1050_IOMUXC_SAI1_TXD1 = 100, - IMXRT1050_IOMUXC_SAI1_TXD2 = 101, - IMXRT1050_IOMUXC_SAI1_TXD3 = 102, - IMXRT1050_IOMUXC_SAI1_TXD4 = 103, - IMXRT1050_IOMUXC_SAI1_TXD5 = 104, - IMXRT1050_IOMUXC_SAI1_TXD6 = 105, - IMXRT1050_IOMUXC_SAI1_TXD7 = 106, - IMXRT1050_IOMUXC_SAI1_MCLK = 107, - IMXRT1050_IOMUXC_SAI2_RXFS = 108, - IMXRT1050_IOMUXC_SAI2_RXC = 109, - IMXRT1050_IOMUXC_SAI2_RXD0 = 110, - IMXRT1050_IOMUXC_SAI2_TXFS = 111, - IMXRT1050_IOMUXC_SAI2_TXC = 112, - IMXRT1050_IOMUXC_SAI2_TXD0 = 113, - IMXRT1050_IOMUXC_SAI2_MCLK = 114, - IMXRT1050_IOMUXC_SAI3_RXFS = 115, - IMXRT1050_IOMUXC_SAI3_RXC = 116, - IMXRT1050_IOMUXC_SAI3_RXD = 117, - IMXRT1050_IOMUXC_SAI3_TXFS = 118, - IMXRT1050_IOMUXC_SAI3_TXC = 119, - IMXRT1050_IOMUXC_SAI3_TXD = 120, - IMXRT1050_IOMUXC_SAI3_MCLK = 121, - IMXRT1050_IOMUXC_SPDIF_TX = 122, - IMXRT1050_IOMUXC_SPDIF_RX = 123, - IMXRT1050_IOMUXC_SPDIF_EXT_CLK = 124, - IMXRT1050_IOMUXC_ECSPI1_SCLK = 125, - IMXRT1050_IOMUXC_ECSPI1_MOSI = 126, - IMXRT1050_IOMUXC_ECSPI1_MISO = 127, - IMXRT1050_IOMUXC_ECSPI1_SS0 = 128, - IMXRT1050_IOMUXC_ECSPI2_SCLK = 129, - IMXRT1050_IOMUXC_ECSPI2_MOSI = 130, - IMXRT1050_IOMUXC_ECSPI2_MISO = 131, - IMXRT1050_IOMUXC_ECSPI2_SS0 = 132, - IMXRT1050_IOMUXC_I2C1_SCL = 133, - IMXRT1050_IOMUXC_I2C1_SDA = 134, - IMXRT1050_IOMUXC_I2C2_SCL = 135, - IMXRT1050_IOMUXC_I2C2_SDA = 136, - IMXRT1050_IOMUXC_I2C3_SCL = 137, - IMXRT1050_IOMUXC_I2C3_SDA = 138, - IMXRT1050_IOMUXC_I2C4_SCL = 139, - IMXRT1050_IOMUXC_I2C4_SDA = 140, - IMXRT1050_IOMUXC_UART1_RXD = 141, - IMXRT1050_IOMUXC_UART1_TXD = 142, - IMXRT1050_IOMUXC_UART2_RXD = 143, - IMXRT1050_IOMUXC_UART2_TXD = 144, - IMXRT1050_IOMUXC_UART3_RXD = 145, - IMXRT1050_IOMUXC_UART3_TXD = 146, - IMXRT1050_IOMUXC_UART4_RXD = 147, - IMXRT1050_IOMUXC_UART4_TXD = 148, + IMXRT1050_PAD_RESERVE0, + IMXRT1050_PAD_RESERVE1, + IMXRT1050_PAD_RESERVE2, + IMXRT1050_PAD_RESERVE3, + IMXRT1050_PAD_RESERVE4, + IMXRT1050_PAD_EMC_00, + IMXRT1050_PAD_EMC_01, + IMXRT1050_PAD_EMC_02, + IMXRT1050_PAD_EMC_03, + IMXRT1050_PAD_EMC_04, + IMXRT1050_PAD_EMC_05, + IMXRT1050_PAD_EMC_06, + IMXRT1050_PAD_EMC_07, + IMXRT1050_PAD_EMC_08, + IMXRT1050_PAD_EMC_09, + IMXRT1050_PAD_EMC_10, + IMXRT1050_PAD_EMC_11, + IMXRT1050_PAD_EMC_12, + IMXRT1050_PAD_EMC_13, + IMXRT1050_PAD_EMC_14, + IMXRT1050_PAD_EMC_15, + IMXRT1050_PAD_EMC_16, + IMXRT1050_PAD_EMC_17, + IMXRT1050_PAD_EMC_18, + IMXRT1050_PAD_EMC_19, + IMXRT1050_PAD_EMC_20, + IMXRT1050_PAD_EMC_21, + IMXRT1050_PAD_EMC_22, + IMXRT1050_PAD_EMC_23, + IMXRT1050_PAD_EMC_24, + IMXRT1050_PAD_EMC_25, + IMXRT1050_PAD_EMC_26, + IMXRT1050_PAD_EMC_27, + IMXRT1050_PAD_EMC_28, + IMXRT1050_PAD_EMC_29, + IMXRT1050_PAD_EMC_30, + IMXRT1050_PAD_EMC_31, + IMXRT1050_PAD_EMC_32, + IMXRT1050_PAD_EMC_33, + IMXRT1050_PAD_EMC_34, + IMXRT1050_PAD_EMC_35, + IMXRT1050_PAD_EMC_36, + IMXRT1050_PAD_EMC_37, + IMXRT1050_PAD_EMC_38, + IMXRT1050_PAD_EMC_39, + IMXRT1050_PAD_EMC_40, + IMXRT1050_PAD_EMC_41, + IMXRT1050_PAD_AD_B0_00, + IMXRT1050_PAD_AD_B0_01, + IMXRT1050_PAD_AD_B0_02, + IMXRT1050_PAD_AD_B0_03, + IMXRT1050_PAD_AD_B0_04, + IMXRT1050_PAD_AD_B0_05, + IMXRT1050_PAD_AD_B0_06, + IMXRT1050_PAD_AD_B0_07, + IMXRT1050_PAD_AD_B0_08, + IMXRT1050_PAD_AD_B0_09, + IMXRT1050_PAD_AD_B0_10, + IMXRT1050_PAD_AD_B0_11, + IMXRT1050_PAD_AD_B0_12, + IMXRT1050_PAD_AD_B0_13, + IMXRT1050_PAD_AD_B0_14, + IMXRT1050_PAD_AD_B0_15, + IMXRT1050_PAD_AD_B1_00, + IMXRT1050_PAD_AD_B1_01, + IMXRT1050_PAD_AD_B1_02, + IMXRT1050_PAD_AD_B1_03, + IMXRT1050_PAD_AD_B1_04, + IMXRT1050_PAD_AD_B1_05, + IMXRT1050_PAD_AD_B1_06, + IMXRT1050_PAD_AD_B1_07, + IMXRT1050_PAD_AD_B1_08, + IMXRT1050_PAD_AD_B1_09, + IMXRT1050_PAD_AD_B1_10, + IMXRT1050_PAD_AD_B1_11, + IMXRT1050_PAD_AD_B1_12, + IMXRT1050_PAD_AD_B1_13, + IMXRT1050_PAD_AD_B1_14, + IMXRT1050_PAD_AD_B1_15, + IMXRT1050_PAD_B0_00, + IMXRT1050_PAD_B0_01, + IMXRT1050_PAD_B0_02, + IMXRT1050_PAD_B0_03, + IMXRT1050_PAD_B0_04, + IMXRT1050_PAD_B0_05, + IMXRT1050_PAD_B0_06, + IMXRT1050_PAD_B0_07, + IMXRT1050_PAD_B0_08, + IMXRT1050_PAD_B0_09, + IMXRT1050_PAD_B0_10, + IMXRT1050_PAD_B0_11, + IMXRT1050_PAD_B0_12, + IMXRT1050_PAD_B0_13, + IMXRT1050_PAD_B0_14, + IMXRT1050_PAD_B0_15, + IMXRT1050_PAD_B1_00, + IMXRT1050_PAD_B1_01, + IMXRT1050_PAD_B1_02, + IMXRT1050_PAD_B1_03, + IMXRT1050_PAD_B1_04, + IMXRT1050_PAD_B1_05, + IMXRT1050_PAD_B1_06, + IMXRT1050_PAD_B1_07, + IMXRT1050_PAD_B1_08, + IMXRT1050_PAD_B1_09, + IMXRT1050_PAD_B1_10, + IMXRT1050_PAD_B1_11, + IMXRT1050_PAD_B1_12, + IMXRT1050_PAD_B1_13, + IMXRT1050_PAD_B1_14, + IMXRT1050_PAD_B1_15, + IMXRT1050_PAD_SD_B0_00, + IMXRT1050_PAD_SD_B0_01, + IMXRT1050_PAD_SD_B0_02, + IMXRT1050_PAD_SD_B0_03, + IMXRT1050_PAD_SD_B0_04, + IMXRT1050_PAD_SD_B0_05, + IMXRT1050_PAD_SD_B1_00, + IMXRT1050_PAD_SD_B1_01, + IMXRT1050_PAD_SD_B1_02, + IMXRT1050_PAD_SD_B1_03, + IMXRT1050_PAD_SD_B1_04, + IMXRT1050_PAD_SD_B1_05, + IMXRT1050_PAD_SD_B1_06, + IMXRT1050_PAD_SD_B1_07, + IMXRT1050_PAD_SD_B1_08, + IMXRT1050_PAD_SD_B1_09, + IMXRT1050_PAD_SD_B1_10, + IMXRT1050_PAD_SD_B1_11, }; /* Pad names for the pinmux subsystem */ @@ -171,150 +151,130 @@ static const struct pinctrl_pin_desc imxrt1050_pinctrl_pads[] = { IMX_PINCTRL_PIN(IMXRT1050_PAD_RESERVE2), IMX_PINCTRL_PIN(IMXRT1050_PAD_RESERVE3), IMX_PINCTRL_PIN(IMXRT1050_PAD_RESERVE4), - IMX_PINCTRL_PIN(IMXRT1050_PAD_RESERVE5), - IMX_PINCTRL_PIN(IMXRT1050_PAD_RESERVE6), - IMX_PINCTRL_PIN(IMXRT1050_PAD_RESERVE7), - IMX_PINCTRL_PIN(IMXRT1050_PAD_RESERVE8), - IMX_PINCTRL_PIN(IMXRT1050_PAD_RESERVE9), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_GPIO1_IO00), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_GPIO1_IO01), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_GPIO1_IO02), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_GPIO1_IO03), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_GPIO1_IO04), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_GPIO1_IO05), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_GPIO1_IO06), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_GPIO1_IO07), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_GPIO1_IO08), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_GPIO1_IO09), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_GPIO1_IO10), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_GPIO1_IO11), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_GPIO1_IO12), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_GPIO1_IO13), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_GPIO1_IO14), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_GPIO1_IO15), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_ENET_MDC), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_ENET_MDIO), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_ENET_TD3), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_ENET_TD2), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_ENET_TD1), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_ENET_TD0), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_ENET_TX_CTL), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_ENET_TXC), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_ENET_RX_CTL), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_ENET_RXC), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_ENET_RD0), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_ENET_RD1), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_ENET_RD2), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_ENET_RD3), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_SD1_CLK), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_SD1_CMD), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_SD1_DATA0), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_SD1_DATA1), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_SD1_DATA2), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_SD1_DATA3), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_SD1_DATA4), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_SD1_DATA5), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_SD1_DATA6), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_SD1_DATA7), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_SD1_RESET_B), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_SD1_STROBE), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_SD2_CD_B), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_SD2_CLK), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_SD2_CMD), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_SD2_DATA0), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_SD2_DATA1), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_SD2_DATA2), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_SD2_DATA3), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_SD2_RESET_B), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_SD2_WP), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_NAND_ALE), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_NAND_CE0), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_NAND_CE1), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_NAND_CE2), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_NAND_CE3), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_NAND_CLE), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_NAND_DATA00), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_NAND_DATA01), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_NAND_DATA02), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_NAND_DATA03), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_NAND_DATA04), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_NAND_DATA05), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_NAND_DATA06), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_NAND_DATA07), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_NAND_DQS), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_NAND_RE_B), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_NAND_READY_B), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_NAND_WE_B), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_NAND_WP_B), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_SAI5_RXFS), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_SAI5_RXC), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_SAI5_RXD0), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_SAI5_RXD1), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_SAI5_RXD2), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_SAI5_RXD3), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_SAI5_MCLK), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_SAI1_RXFS), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_SAI1_RXC), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_SAI1_RXD0), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_SAI1_RXD1), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_SAI1_RXD2), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_SAI1_RXD3), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_SAI1_RXD4), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_SAI1_RXD5), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_SAI1_RXD6), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_SAI1_RXD7), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_SAI1_TXFS), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_SAI1_TXC), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_SAI1_TXD0), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_SAI1_TXD1), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_SAI1_TXD2), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_SAI1_TXD3), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_SAI1_TXD4), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_SAI1_TXD5), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_SAI1_TXD6), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_SAI1_TXD7), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_SAI1_MCLK), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_SAI2_RXFS), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_SAI2_RXC), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_SAI2_RXD0), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_SAI2_TXFS), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_SAI2_TXC), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_SAI2_TXD0), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_SAI2_MCLK), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_SAI3_RXFS), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_SAI3_RXC), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_SAI3_RXD), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_SAI3_TXFS), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_SAI3_TXC), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_SAI3_TXD), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_SAI3_MCLK), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_SPDIF_TX), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_SPDIF_RX), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_SPDIF_EXT_CLK), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_ECSPI1_SCLK), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_ECSPI1_MOSI), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_ECSPI1_MISO), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_ECSPI1_SS0), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_ECSPI2_SCLK), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_ECSPI2_MOSI), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_ECSPI2_MISO), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_ECSPI2_SS0), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_I2C1_SCL), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_I2C1_SDA), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_I2C2_SCL), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_I2C2_SDA), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_I2C3_SCL), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_I2C3_SDA), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_I2C4_SCL), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_I2C4_SDA), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_UART1_RXD), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_UART1_TXD), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_UART2_RXD), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_UART2_TXD), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_UART3_RXD), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_UART3_TXD), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_UART4_RXD), - IMX_PINCTRL_PIN(IMXRT1050_IOMUXC_UART4_TXD), + IMX_PINCTRL_PIN(IMXRT1050_PAD_EMC_00), + IMX_PINCTRL_PIN(IMXRT1050_PAD_EMC_01), + IMX_PINCTRL_PIN(IMXRT1050_PAD_EMC_02), + IMX_PINCTRL_PIN(IMXRT1050_PAD_EMC_03), + IMX_PINCTRL_PIN(IMXRT1050_PAD_EMC_04), + IMX_PINCTRL_PIN(IMXRT1050_PAD_EMC_05), + IMX_PINCTRL_PIN(IMXRT1050_PAD_EMC_06), + IMX_PINCTRL_PIN(IMXRT1050_PAD_EMC_07), + IMX_PINCTRL_PIN(IMXRT1050_PAD_EMC_08), + IMX_PINCTRL_PIN(IMXRT1050_PAD_EMC_09), + IMX_PINCTRL_PIN(IMXRT1050_PAD_EMC_10), + IMX_PINCTRL_PIN(IMXRT1050_PAD_EMC_11), + IMX_PINCTRL_PIN(IMXRT1050_PAD_EMC_12), + IMX_PINCTRL_PIN(IMXRT1050_PAD_EMC_13), + IMX_PINCTRL_PIN(IMXRT1050_PAD_EMC_14), + IMX_PINCTRL_PIN(IMXRT1050_PAD_EMC_15), + IMX_PINCTRL_PIN(IMXRT1050_PAD_EMC_16), + IMX_PINCTRL_PIN(IMXRT1050_PAD_EMC_17), + IMX_PINCTRL_PIN(IMXRT1050_PAD_EMC_18), + IMX_PINCTRL_PIN(IMXRT1050_PAD_EMC_19), + IMX_PINCTRL_PIN(IMXRT1050_PAD_EMC_20), + IMX_PINCTRL_PIN(IMXRT1050_PAD_EMC_21), + IMX_PINCTRL_PIN(IMXRT1050_PAD_EMC_22), + IMX_PINCTRL_PIN(IMXRT1050_PAD_EMC_23), + IMX_PINCTRL_PIN(IMXRT1050_PAD_EMC_24), + IMX_PINCTRL_PIN(IMXRT1050_PAD_EMC_25), + IMX_PINCTRL_PIN(IMXRT1050_PAD_EMC_26), + IMX_PINCTRL_PIN(IMXRT1050_PAD_EMC_27), + IMX_PINCTRL_PIN(IMXRT1050_PAD_EMC_28), + IMX_PINCTRL_PIN(IMXRT1050_PAD_EMC_29), + IMX_PINCTRL_PIN(IMXRT1050_PAD_EMC_30), + IMX_PINCTRL_PIN(IMXRT1050_PAD_EMC_31), + IMX_PINCTRL_PIN(IMXRT1050_PAD_EMC_32), + IMX_PINCTRL_PIN(IMXRT1050_PAD_EMC_33), + IMX_PINCTRL_PIN(IMXRT1050_PAD_EMC_34), + IMX_PINCTRL_PIN(IMXRT1050_PAD_EMC_35), + IMX_PINCTRL_PIN(IMXRT1050_PAD_EMC_36), + IMX_PINCTRL_PIN(IMXRT1050_PAD_EMC_37), + IMX_PINCTRL_PIN(IMXRT1050_PAD_EMC_38), + IMX_PINCTRL_PIN(IMXRT1050_PAD_EMC_39), + IMX_PINCTRL_PIN(IMXRT1050_PAD_EMC_40), + IMX_PINCTRL_PIN(IMXRT1050_PAD_EMC_41), + IMX_PINCTRL_PIN(IMXRT1050_PAD_AD_B0_00), + IMX_PINCTRL_PIN(IMXRT1050_PAD_AD_B0_01), + IMX_PINCTRL_PIN(IMXRT1050_PAD_AD_B0_02), + IMX_PINCTRL_PIN(IMXRT1050_PAD_AD_B0_03), + IMX_PINCTRL_PIN(IMXRT1050_PAD_AD_B0_04), + IMX_PINCTRL_PIN(IMXRT1050_PAD_AD_B0_05), + IMX_PINCTRL_PIN(IMXRT1050_PAD_AD_B0_06), + IMX_PINCTRL_PIN(IMXRT1050_PAD_AD_B0_07), + IMX_PINCTRL_PIN(IMXRT1050_PAD_AD_B0_08), + IMX_PINCTRL_PIN(IMXRT1050_PAD_AD_B0_09), + IMX_PINCTRL_PIN(IMXRT1050_PAD_AD_B0_10), + IMX_PINCTRL_PIN(IMXRT1050_PAD_AD_B0_11), + IMX_PINCTRL_PIN(IMXRT1050_PAD_AD_B0_12), + IMX_PINCTRL_PIN(IMXRT1050_PAD_AD_B0_13), + IMX_PINCTRL_PIN(IMXRT1050_PAD_AD_B0_14), + IMX_PINCTRL_PIN(IMXRT1050_PAD_AD_B0_15), + IMX_PINCTRL_PIN(IMXRT1050_PAD_AD_B1_00), + IMX_PINCTRL_PIN(IMXRT1050_PAD_AD_B1_01), + IMX_PINCTRL_PIN(IMXRT1050_PAD_AD_B1_02), + IMX_PINCTRL_PIN(IMXRT1050_PAD_AD_B1_03), + IMX_PINCTRL_PIN(IMXRT1050_PAD_AD_B1_04), + IMX_PINCTRL_PIN(IMXRT1050_PAD_AD_B1_05), + IMX_PINCTRL_PIN(IMXRT1050_PAD_AD_B1_06), + IMX_PINCTRL_PIN(IMXRT1050_PAD_AD_B1_07), + IMX_PINCTRL_PIN(IMXRT1050_PAD_AD_B1_08), + IMX_PINCTRL_PIN(IMXRT1050_PAD_AD_B1_09), + IMX_PINCTRL_PIN(IMXRT1050_PAD_AD_B1_10), + IMX_PINCTRL_PIN(IMXRT1050_PAD_AD_B1_11), + IMX_PINCTRL_PIN(IMXRT1050_PAD_AD_B1_12), + IMX_PINCTRL_PIN(IMXRT1050_PAD_AD_B1_13), + IMX_PINCTRL_PIN(IMXRT1050_PAD_AD_B1_14), + IMX_PINCTRL_PIN(IMXRT1050_PAD_AD_B1_15), + IMX_PINCTRL_PIN(IMXRT1050_PAD_B0_00), + IMX_PINCTRL_PIN(IMXRT1050_PAD_B0_01), + IMX_PINCTRL_PIN(IMXRT1050_PAD_B0_02), + IMX_PINCTRL_PIN(IMXRT1050_PAD_B0_03), + IMX_PINCTRL_PIN(IMXRT1050_PAD_B0_04), + IMX_PINCTRL_PIN(IMXRT1050_PAD_B0_05), + IMX_PINCTRL_PIN(IMXRT1050_PAD_B0_06), + IMX_PINCTRL_PIN(IMXRT1050_PAD_B0_07), + IMX_PINCTRL_PIN(IMXRT1050_PAD_B0_08), + IMX_PINCTRL_PIN(IMXRT1050_PAD_B0_09), + IMX_PINCTRL_PIN(IMXRT1050_PAD_B0_10), + IMX_PINCTRL_PIN(IMXRT1050_PAD_B0_11), + IMX_PINCTRL_PIN(IMXRT1050_PAD_B0_12), + IMX_PINCTRL_PIN(IMXRT1050_PAD_B0_13), + IMX_PINCTRL_PIN(IMXRT1050_PAD_B0_14), + IMX_PINCTRL_PIN(IMXRT1050_PAD_B0_15), + IMX_PINCTRL_PIN(IMXRT1050_PAD_B1_00), + IMX_PINCTRL_PIN(IMXRT1050_PAD_B1_01), + IMX_PINCTRL_PIN(IMXRT1050_PAD_B1_02), + IMX_PINCTRL_PIN(IMXRT1050_PAD_B1_03), + IMX_PINCTRL_PIN(IMXRT1050_PAD_B1_04), + IMX_PINCTRL_PIN(IMXRT1050_PAD_B1_05), + IMX_PINCTRL_PIN(IMXRT1050_PAD_B1_06), + IMX_PINCTRL_PIN(IMXRT1050_PAD_B1_07), + IMX_PINCTRL_PIN(IMXRT1050_PAD_B1_08), + IMX_PINCTRL_PIN(IMXRT1050_PAD_B1_09), + IMX_PINCTRL_PIN(IMXRT1050_PAD_B1_10), + IMX_PINCTRL_PIN(IMXRT1050_PAD_B1_11), + IMX_PINCTRL_PIN(IMXRT1050_PAD_B1_12), + IMX_PINCTRL_PIN(IMXRT1050_PAD_B1_13), + IMX_PINCTRL_PIN(IMXRT1050_PAD_B1_14), + IMX_PINCTRL_PIN(IMXRT1050_PAD_B1_15), + IMX_PINCTRL_PIN(IMXRT1050_PAD_SD_B0_00), + IMX_PINCTRL_PIN(IMXRT1050_PAD_SD_B0_01), + IMX_PINCTRL_PIN(IMXRT1050_PAD_SD_B0_02), + IMX_PINCTRL_PIN(IMXRT1050_PAD_SD_B0_03), + IMX_PINCTRL_PIN(IMXRT1050_PAD_SD_B0_04), + IMX_PINCTRL_PIN(IMXRT1050_PAD_SD_B0_05), + IMX_PINCTRL_PIN(IMXRT1050_PAD_SD_B1_00), + IMX_PINCTRL_PIN(IMXRT1050_PAD_SD_B1_01), + IMX_PINCTRL_PIN(IMXRT1050_PAD_SD_B1_02), + IMX_PINCTRL_PIN(IMXRT1050_PAD_SD_B1_03), + IMX_PINCTRL_PIN(IMXRT1050_PAD_SD_B1_04), + IMX_PINCTRL_PIN(IMXRT1050_PAD_SD_B1_05), + IMX_PINCTRL_PIN(IMXRT1050_PAD_SD_B1_06), + IMX_PINCTRL_PIN(IMXRT1050_PAD_SD_B1_07), + IMX_PINCTRL_PIN(IMXRT1050_PAD_SD_B1_08), + IMX_PINCTRL_PIN(IMXRT1050_PAD_SD_B1_09), + IMX_PINCTRL_PIN(IMXRT1050_PAD_SD_B1_10), + IMX_PINCTRL_PIN(IMXRT1050_PAD_SD_B1_11), }; static const struct imx_pinctrl_soc_info imxrt1050_pinctrl_info = { diff --git a/drivers/pinctrl/freescale/pinctrl-mxs.c b/drivers/pinctrl/freescale/pinctrl-mxs.c index 735cedd0958a2b..9f78c9b29ddd96 100644 --- a/drivers/pinctrl/freescale/pinctrl-mxs.c +++ b/drivers/pinctrl/freescale/pinctrl-mxs.c @@ -7,12 +7,15 @@ #include <linux/io.h> #include <linux/of.h> #include <linux/of_address.h> +#include <linux/platform_device.h> +#include <linux/seq_file.h> +#include <linux/slab.h> + #include <linux/pinctrl/machine.h> #include <linux/pinctrl/pinconf.h> #include <linux/pinctrl/pinctrl.h> #include <linux/pinctrl/pinmux.h> -#include <linux/platform_device.h> -#include <linux/slab.h> + #include "../core.h" #include "pinctrl-mxs.h" diff --git a/drivers/pinctrl/freescale/pinctrl-scu.c b/drivers/pinctrl/freescale/pinctrl-scu.c index 59b5f8a35111ba..ea261b6e74581f 100644 --- a/drivers/pinctrl/freescale/pinctrl-scu.c +++ b/drivers/pinctrl/freescale/pinctrl-scu.c @@ -15,6 +15,11 @@ #include "../core.h" #include "pinctrl-imx.h" +#define IMX_SC_PAD_FUNC_GET_WAKEUP 9 +#define IMX_SC_PAD_FUNC_SET_WAKEUP 4 +#define IMX_SC_IRQ_GROUP_WAKE 3 /* Wakeup interrupts */ +#define IMX_SC_IRQ_PAD 2 /* Pad wakeup */ + enum pad_func_e { IMX_SC_PAD_FUNC_SET = 15, IMX_SC_PAD_FUNC_GET = 16, @@ -36,10 +41,18 @@ struct imx_sc_msg_resp_pad_get { u32 val; } __packed; +struct imx_sc_msg_gpio_set_pad_wakeup { + struct imx_sc_rpc_msg hdr; + u16 pad; + u8 wakeup; +} __packed __aligned(4); + static struct imx_sc_ipc *pinctrl_ipc_handle; int imx_pinctrl_sc_ipc_init(struct platform_device *pdev) { + imx_scu_irq_group_enable(IMX_SC_IRQ_GROUP_WAKE, + IMX_SC_IRQ_PAD, true); return imx_scu_get_handle(&pinctrl_ipc_handle); } EXPORT_SYMBOL_GPL(imx_pinctrl_sc_ipc_init); @@ -81,6 +94,23 @@ int imx_pinconf_set_scu(struct pinctrl_dev *pctldev, unsigned pin_id, unsigned int val; int ret; + if (num_configs == 1) { + struct imx_sc_msg_gpio_set_pad_wakeup wmsg; + + hdr = &wmsg.hdr; + hdr->ver = IMX_SC_RPC_VERSION; + hdr->svc = IMX_SC_RPC_SVC_PAD; + hdr->func = IMX_SC_PAD_FUNC_SET_WAKEUP; + hdr->size = 2; + wmsg.pad = pin_id; + wmsg.wakeup = *configs; + ret = imx_scu_call_rpc(pinctrl_ipc_handle, &wmsg, true); + + dev_dbg(ipctl->dev, "wakeup pin_id: %d type: %ld\n", + pin_id, *configs); + return ret; + } + /* * Set mux and conf together in one IPC call */ diff --git a/drivers/pinctrl/intel/Kconfig b/drivers/pinctrl/intel/Kconfig index 078eec8af4a44d..b3ec0062441659 100644 --- a/drivers/pinctrl/intel/Kconfig +++ b/drivers/pinctrl/intel/Kconfig @@ -47,6 +47,17 @@ config PINCTRL_MERRIFIELD interface that allows configuring of SoC pins and using them as GPIOs. +config PINCTRL_MOOREFIELD + tristate "Intel Moorefield pinctrl driver" + depends on X86_INTEL_MID + select PINMUX + select PINCONF + select GENERIC_PINCONF + help + Moorefield Family-Level Interface Shim (FLIS) driver provides an + interface that allows configuring of SoC pins and using them as + GPIOs. + config PINCTRL_INTEL tristate select PINMUX diff --git a/drivers/pinctrl/intel/Makefile b/drivers/pinctrl/intel/Makefile index bb87e7bc7b20ee..906dd6c8d83718 100644 --- a/drivers/pinctrl/intel/Makefile +++ b/drivers/pinctrl/intel/Makefile @@ -5,6 +5,7 @@ obj-$(CONFIG_PINCTRL_BAYTRAIL) += pinctrl-baytrail.o obj-$(CONFIG_PINCTRL_CHERRYVIEW) += pinctrl-cherryview.o obj-$(CONFIG_PINCTRL_LYNXPOINT) += pinctrl-lynxpoint.o obj-$(CONFIG_PINCTRL_MERRIFIELD) += pinctrl-merrifield.o +obj-$(CONFIG_PINCTRL_MOOREFIELD) += pinctrl-moorefield.o obj-$(CONFIG_PINCTRL_INTEL) += pinctrl-intel.o obj-$(CONFIG_PINCTRL_ALDERLAKE) += pinctrl-alderlake.o obj-$(CONFIG_PINCTRL_BROXTON) += pinctrl-broxton.o diff --git a/drivers/pinctrl/intel/pinctrl-alderlake.c b/drivers/pinctrl/intel/pinctrl-alderlake.c index 62dbd1e67513dc..427febe09b6982 100644 --- a/drivers/pinctrl/intel/pinctrl-alderlake.c +++ b/drivers/pinctrl/intel/pinctrl-alderlake.c @@ -34,33 +34,25 @@ .gpio_base = (g), \ } -#define ADL_N_COMMUNITY(b, s, e, g) \ - { \ - .barno = (b), \ - .padown_offset = ADL_N_PAD_OWN, \ - .padcfglock_offset = ADL_N_PADCFGLOCK, \ - .hostown_offset = ADL_N_HOSTSW_OWN, \ - .is_offset = ADL_N_GPI_IS, \ - .ie_offset = ADL_N_GPI_IE, \ - .pin_base = (s), \ - .npins = ((e) - (s) + 1), \ - .gpps = (g), \ - .ngpps = ARRAY_SIZE(g), \ +#define ADL_COMMUNITY(b, s, e, g, v) \ + { \ + .barno = (b), \ + .padown_offset = ADL_##v##_PAD_OWN, \ + .padcfglock_offset = ADL_##v##_PADCFGLOCK, \ + .hostown_offset = ADL_##v##_HOSTSW_OWN, \ + .is_offset = ADL_##v##_GPI_IS, \ + .ie_offset = ADL_##v##_GPI_IE, \ + .pin_base = (s), \ + .npins = ((e) - (s) + 1), \ + .gpps = (g), \ + .ngpps = ARRAY_SIZE(g), \ } +#define ADL_N_COMMUNITY(b, s, e, g) \ + ADL_COMMUNITY(b, s, e, g, N) + #define ADL_S_COMMUNITY(b, s, e, g) \ - { \ - .barno = (b), \ - .padown_offset = ADL_S_PAD_OWN, \ - .padcfglock_offset = ADL_S_PADCFGLOCK, \ - .hostown_offset = ADL_S_HOSTSW_OWN, \ - .is_offset = ADL_S_GPI_IS, \ - .ie_offset = ADL_S_GPI_IE, \ - .pin_base = (s), \ - .npins = ((e) - (s) + 1), \ - .gpps = (g), \ - .ngpps = ARRAY_SIZE(g), \ - } + ADL_COMMUNITY(b, s, e, g, S) /* Alder Lake-N */ static const struct pinctrl_pin_desc adln_pins[] = { diff --git a/drivers/pinctrl/intel/pinctrl-cannonlake.c b/drivers/pinctrl/intel/pinctrl-cannonlake.c index 8078c7739d6ab2..f8a8b9b14de946 100644 --- a/drivers/pinctrl/intel/pinctrl-cannonlake.c +++ b/drivers/pinctrl/intel/pinctrl-cannonlake.c @@ -30,12 +30,12 @@ .gpio_base = (g), \ } -#define CNL_COMMUNITY(b, s, e, ho, g) \ +#define CNL_COMMUNITY(b, s, e, g, v) \ { \ .barno = (b), \ .padown_offset = CNL_PAD_OWN, \ .padcfglock_offset = CNL_PADCFGLOCK, \ - .hostown_offset = (ho), \ + .hostown_offset = CNL_##v##_HOSTSW_OWN, \ .is_offset = CNL_GPI_IS, \ .ie_offset = CNL_GPI_IE, \ .pin_base = (s), \ @@ -45,10 +45,10 @@ } #define CNL_LP_COMMUNITY(b, s, e, g) \ - CNL_COMMUNITY(b, s, e, CNL_LP_HOSTSW_OWN, g) + CNL_COMMUNITY(b, s, e, g, LP) #define CNL_H_COMMUNITY(b, s, e, g) \ - CNL_COMMUNITY(b, s, e, CNL_H_HOSTSW_OWN, g) + CNL_COMMUNITY(b, s, e, g, H) /* Cannon Lake-H */ static const struct pinctrl_pin_desc cnlh_pins[] = { diff --git a/drivers/pinctrl/intel/pinctrl-cherryview.c b/drivers/pinctrl/intel/pinctrl-cherryview.c index 5c4fd16e5b010d..11b81213922d82 100644 --- a/drivers/pinctrl/intel/pinctrl-cherryview.c +++ b/drivers/pinctrl/intel/pinctrl-cherryview.c @@ -16,12 +16,14 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/platform_device.h> +#include <linux/seq_file.h> #include <linux/types.h> +#include <linux/pinctrl/consumer.h> +#include <linux/pinctrl/pinconf-generic.h> +#include <linux/pinctrl/pinconf.h> #include <linux/pinctrl/pinctrl.h> #include <linux/pinctrl/pinmux.h> -#include <linux/pinctrl/pinconf.h> -#include <linux/pinctrl/pinconf-generic.h> #include "pinctrl-intel.h" diff --git a/drivers/pinctrl/intel/pinctrl-icelake.c b/drivers/pinctrl/intel/pinctrl-icelake.c index 27c248cc16f7d1..84a56d9ae47ead 100644 --- a/drivers/pinctrl/intel/pinctrl-icelake.c +++ b/drivers/pinctrl/intel/pinctrl-icelake.c @@ -30,14 +30,14 @@ .gpio_base = (g), \ } -#define ICL_COMMUNITY(b, s, e, ie, g) \ +#define ICL_COMMUNITY(b, s, e, g, v) \ { \ .barno = (b), \ .padown_offset = ICL_PAD_OWN, \ .padcfglock_offset = ICL_PADCFGLOCK, \ .hostown_offset = ICL_HOSTSW_OWN, \ .is_offset = ICL_GPI_IS, \ - .ie_offset = (ie), \ + .ie_offset = ICL_##v##_GPI_IE, \ .pin_base = (s), \ .npins = ((e) - (s) + 1), \ .gpps = (g), \ @@ -45,10 +45,10 @@ } #define ICL_LP_COMMUNITY(b, s, e, g) \ - ICL_COMMUNITY(b, s, e, ICL_LP_GPI_IE, g) + ICL_COMMUNITY(b, s, e, g, LP) #define ICL_N_COMMUNITY(b, s, e, g) \ - ICL_COMMUNITY(b, s, e, ICL_N_GPI_IE, g) + ICL_COMMUNITY(b, s, e, g, N) /* Ice Lake-LP */ static const struct pinctrl_pin_desc icllp_pins[] = { diff --git a/drivers/pinctrl/intel/pinctrl-intel.c b/drivers/pinctrl/intel/pinctrl-intel.c index 047a8374b4fdcf..cc3aaba2418824 100644 --- a/drivers/pinctrl/intel/pinctrl-intel.c +++ b/drivers/pinctrl/intel/pinctrl-intel.c @@ -14,12 +14,17 @@ #include <linux/module.h> #include <linux/platform_device.h> #include <linux/property.h> +#include <linux/seq_file.h> +#include <linux/string_helpers.h> #include <linux/time.h> -#include <linux/pinctrl/pinctrl.h> -#include <linux/pinctrl/pinmux.h> +#include <linux/pinctrl/consumer.h> #include <linux/pinctrl/pinconf.h> #include <linux/pinctrl/pinconf-generic.h> +#include <linux/pinctrl/pinctrl.h> +#include <linux/pinctrl/pinmux.h> + +#include <linux/platform_data/x86/pwm-lpss.h> #include "../core.h" #include "pinctrl-intel.h" @@ -46,6 +51,8 @@ #define PADOWN_MASK(p) (GENMASK(3, 0) << PADOWN_SHIFT(p)) #define PADOWN_GPP(p) ((p) / 8) +#define PWMC 0x204 + /* Offset from pad_regs */ #define PADCFG0 0x000 #define PADCFG0_RXEVCFG_SHIFT 25 @@ -1170,7 +1177,7 @@ static int intel_gpio_irq_wake(struct irq_data *d, unsigned int on) else disable_irq_wake(pctrl->irq); - dev_dbg(pctrl->dev, "%sable wake for pin %u\n", on ? "en" : "dis", pin); + dev_dbg(pctrl->dev, "%s wake for pin %u\n", str_enable_disable(on), pin); return 0; } @@ -1504,17 +1511,39 @@ static int intel_pinctrl_pm_init(struct intel_pinctrl *pctrl) return 0; } +static int intel_pinctrl_probe_pwm(struct intel_pinctrl *pctrl, + struct intel_community *community) +{ + static const struct pwm_lpss_boardinfo info = { + .clk_rate = 19200000, + .npwm = 1, + .base_unit_bits = 22, + .bypass = true, + }; + struct pwm_lpss_chip *pwm; + + if (!(community->features & PINCTRL_FEATURE_PWM)) + return 0; + + if (!IS_REACHABLE(CONFIG_PWM_LPSS)) + return 0; + + pwm = devm_pwm_lpss_probe(pctrl->dev, community->regs + PWMC, &info); + return PTR_ERR_OR_ZERO(pwm); +} + static int intel_pinctrl_probe(struct platform_device *pdev, const struct intel_pinctrl_soc_data *soc_data) { + struct device *dev = &pdev->dev; struct intel_pinctrl *pctrl; int i, ret, irq; - pctrl = devm_kzalloc(&pdev->dev, sizeof(*pctrl), GFP_KERNEL); + pctrl = devm_kzalloc(dev, sizeof(*pctrl), GFP_KERNEL); if (!pctrl) return -ENOMEM; - pctrl->dev = &pdev->dev; + pctrl->dev = dev; pctrl->soc = soc_data; raw_spin_lock_init(&pctrl->lock); @@ -1523,8 +1552,8 @@ static int intel_pinctrl_probe(struct platform_device *pdev, * to the registers. */ pctrl->ncommunities = pctrl->soc->ncommunities; - pctrl->communities = devm_kcalloc(&pdev->dev, pctrl->ncommunities, - sizeof(*pctrl->communities), GFP_KERNEL); + pctrl->communities = devm_kcalloc(dev, pctrl->ncommunities, + sizeof(*pctrl->communities), GFP_KERNEL); if (!pctrl->communities) return -ENOMEM; @@ -1575,7 +1604,7 @@ static int intel_pinctrl_probe(struct platform_device *pdev, offset = (value & CAPLIST_NEXT_MASK) >> CAPLIST_NEXT_SHIFT; } while (offset); - dev_dbg(&pdev->dev, "Community%d features: %#08x\n", i, community->features); + dev_dbg(dev, "Community%d features: %#08x\n", i, community->features); /* Read offset of the pad configuration registers */ offset = readl(regs + PADBAR); @@ -1589,6 +1618,10 @@ static int intel_pinctrl_probe(struct platform_device *pdev, ret = intel_pinctrl_add_padgroups_by_size(pctrl, community); if (ret) return ret; + + ret = intel_pinctrl_probe_pwm(pctrl, community); + if (ret) + return ret; } irq = platform_get_irq(pdev, 0); @@ -1600,14 +1633,13 @@ static int intel_pinctrl_probe(struct platform_device *pdev, return ret; pctrl->pctldesc = intel_pinctrl_desc; - pctrl->pctldesc.name = dev_name(&pdev->dev); + pctrl->pctldesc.name = dev_name(dev); pctrl->pctldesc.pins = pctrl->soc->pins; pctrl->pctldesc.npins = pctrl->soc->npins; - pctrl->pctldev = devm_pinctrl_register(&pdev->dev, &pctrl->pctldesc, - pctrl); + pctrl->pctldev = devm_pinctrl_register(dev, &pctrl->pctldesc, pctrl); if (IS_ERR(pctrl->pctldev)) { - dev_err(&pdev->dev, "failed to register pinctrl driver\n"); + dev_err(dev, "failed to register pinctrl driver\n"); return PTR_ERR(pctrl->pctldev); } @@ -1648,10 +1680,11 @@ const struct intel_pinctrl_soc_data *intel_pinctrl_get_soc_data(struct platform_ { const struct intel_pinctrl_soc_data * const *table; const struct intel_pinctrl_soc_data *data = NULL; + struct device *dev = &pdev->dev; - table = device_get_match_data(&pdev->dev); + table = device_get_match_data(dev); if (table) { - struct acpi_device *adev = ACPI_COMPANION(&pdev->dev); + struct acpi_device *adev = ACPI_COMPANION(dev); unsigned int i; for (i = 0; table[i]; i++) { diff --git a/drivers/pinctrl/intel/pinctrl-lynxpoint.c b/drivers/pinctrl/intel/pinctrl-lynxpoint.c index 5d1abee30f8f15..8d05dad38556cd 100644 --- a/drivers/pinctrl/intel/pinctrl-lynxpoint.c +++ b/drivers/pinctrl/intel/pinctrl-lynxpoint.c @@ -16,13 +16,15 @@ #include <linux/module.h> #include <linux/platform_device.h> #include <linux/pm_runtime.h> +#include <linux/seq_file.h> #include <linux/slab.h> #include <linux/types.h> +#include <linux/pinctrl/consumer.h> +#include <linux/pinctrl/pinconf-generic.h> +#include <linux/pinctrl/pinconf.h> #include <linux/pinctrl/pinctrl.h> #include <linux/pinctrl/pinmux.h> -#include <linux/pinctrl/pinconf.h> -#include <linux/pinctrl/pinconf-generic.h> #include "pinctrl-intel.h" diff --git a/drivers/pinctrl/intel/pinctrl-merrifield.c b/drivers/pinctrl/intel/pinctrl-merrifield.c index 5e752818adb4d4..c0845bb1e9e361 100644 --- a/drivers/pinctrl/intel/pinctrl-merrifield.c +++ b/drivers/pinctrl/intel/pinctrl-merrifield.c @@ -12,8 +12,10 @@ #include <linux/module.h> #include <linux/mod_devicetable.h> #include <linux/platform_device.h> -#include <linux/pinctrl/pinconf.h> +#include <linux/seq_file.h> + #include <linux/pinctrl/pinconf-generic.h> +#include <linux/pinctrl/pinconf.h> #include <linux/pinctrl/pinctrl.h> #include <linux/pinctrl/pinmux.h> @@ -895,17 +897,18 @@ static const struct pinctrl_desc mrfld_pinctrl_desc = { static int mrfld_pinctrl_probe(struct platform_device *pdev) { + struct device *dev = &pdev->dev; struct mrfld_family *families; struct mrfld_pinctrl *mp; void __iomem *regs; size_t nfamilies; unsigned int i; - mp = devm_kzalloc(&pdev->dev, sizeof(*mp), GFP_KERNEL); + mp = devm_kzalloc(dev, sizeof(*mp), GFP_KERNEL); if (!mp) return -ENOMEM; - mp->dev = &pdev->dev; + mp->dev = dev; raw_spin_lock_init(&mp->lock); regs = devm_platform_ioremap_resource(pdev, 0); @@ -917,9 +920,7 @@ static int mrfld_pinctrl_probe(struct platform_device *pdev) * to the registers. */ nfamilies = ARRAY_SIZE(mrfld_families), - families = devm_kmemdup(&pdev->dev, mrfld_families, - sizeof(mrfld_families), - GFP_KERNEL); + families = devm_kmemdup(dev, mrfld_families, sizeof(mrfld_families), GFP_KERNEL); if (!families) return -ENOMEM; @@ -937,13 +938,13 @@ static int mrfld_pinctrl_probe(struct platform_device *pdev) mp->groups = mrfld_groups; mp->ngroups = ARRAY_SIZE(mrfld_groups); mp->pctldesc = mrfld_pinctrl_desc; - mp->pctldesc.name = dev_name(&pdev->dev); + mp->pctldesc.name = dev_name(dev); mp->pctldesc.pins = mrfld_pins; mp->pctldesc.npins = ARRAY_SIZE(mrfld_pins); - mp->pctldev = devm_pinctrl_register(&pdev->dev, &mp->pctldesc, mp); + mp->pctldev = devm_pinctrl_register(dev, &mp->pctldesc, mp); if (IS_ERR(mp->pctldev)) { - dev_err(&pdev->dev, "failed to register pinctrl driver\n"); + dev_err(dev, "failed to register pinctrl driver\n"); return PTR_ERR(mp->pctldev); } diff --git a/drivers/pinctrl/intel/pinctrl-moorefield.c b/drivers/pinctrl/intel/pinctrl-moorefield.c new file mode 100644 index 00000000000000..e3eec671e15da6 --- /dev/null +++ b/drivers/pinctrl/intel/pinctrl-moorefield.c @@ -0,0 +1,916 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Intel Moorefield SoC pinctrl driver + * + * Copyright (C) 2022, Intel Corporation + * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com> + */ + +#include <linux/bits.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/mod_devicetable.h> +#include <linux/platform_device.h> +#include <linux/seq_file.h> + +#include <linux/pinctrl/pinconf-generic.h> +#include <linux/pinctrl/pinconf.h> +#include <linux/pinctrl/pinctrl.h> +#include <linux/pinctrl/pinmux.h> + +#include "pinctrl-intel.h" + +#define MOFLD_FAMILY_NR 64 +#define MOFLD_FAMILY_LEN 0x400 + +#define SLEW_OFFSET 0x000 +#define BUFCFG_OFFSET 0x100 +#define MISC_OFFSET 0x300 + +#define BUFCFG_PINMODE_SHIFT 0 +#define BUFCFG_PINMODE_MASK GENMASK(2, 0) +#define BUFCFG_PINMODE_GPIO 0 +#define BUFCFG_PUPD_VAL_SHIFT 4 +#define BUFCFG_PUPD_VAL_MASK GENMASK(5, 4) +#define BUFCFG_PUPD_VAL_2K 0 +#define BUFCFG_PUPD_VAL_20K 1 +#define BUFCFG_PUPD_VAL_50K 2 +#define BUFCFG_PUPD_VAL_910 3 +#define BUFCFG_PU_EN BIT(8) +#define BUFCFG_PD_EN BIT(9) +#define BUFCFG_Px_EN_MASK GENMASK(9, 8) +#define BUFCFG_SLEWSEL BIT(10) +#define BUFCFG_OVINEN BIT(12) +#define BUFCFG_OVINEN_EN BIT(13) +#define BUFCFG_OVINEN_MASK GENMASK(13, 12) +#define BUFCFG_OVOUTEN BIT(14) +#define BUFCFG_OVOUTEN_EN BIT(15) +#define BUFCFG_OVOUTEN_MASK GENMASK(15, 14) +#define BUFCFG_INDATAOV_VAL BIT(16) +#define BUFCFG_INDATAOV_EN BIT(17) +#define BUFCFG_INDATAOV_MASK GENMASK(17, 16) +#define BUFCFG_OUTDATAOV_VAL BIT(18) +#define BUFCFG_OUTDATAOV_EN BIT(19) +#define BUFCFG_OUTDATAOV_MASK GENMASK(19, 18) +#define BUFCFG_OD_EN BIT(21) + +/** + * struct mofld_family - Intel pin family description + * @barno: MMIO BAR number where registers for this family reside + * @pin_base: Starting pin of pins in this family + * @npins: Number of pins in this family + * @protected: True if family is protected by access + * @regs: family specific common registers + */ +struct mofld_family { + unsigned int barno; + unsigned int pin_base; + size_t npins; + bool protected; + void __iomem *regs; +}; + +#define MOFLD_FAMILY(b, s, e) \ + { \ + .barno = (b), \ + .pin_base = (s), \ + .npins = (e) - (s) + 1, \ + } + +static const struct pinctrl_pin_desc mofld_pins[] = { + /* ULPI (13 pins) */ + PINCTRL_PIN(0, "GP101_ULPI_CLK"), + PINCTRL_PIN(1, "GP136_ULPI_D0"), + PINCTRL_PIN(2, "GP143_ULPI_D1"), + PINCTRL_PIN(3, "GP144_ULPI_D2"), + PINCTRL_PIN(4, "GP145_ULPI_D3"), + PINCTRL_PIN(5, "GP146_ULPI_D4"), + PINCTRL_PIN(6, "GP147_ULPI_D5"), + PINCTRL_PIN(7, "GP148_ULPI_D6"), + PINCTRL_PIN(8, "GP149_ULPI_D7"), + PINCTRL_PIN(9, "ULPI_DIR"), + PINCTRL_PIN(10, "ULPI_NXT"), + PINCTRL_PIN(11, "ULPI_REFCLK"), + PINCTRL_PIN(12, "ULPI_STP"), + /* eMMC (12 pins) */ + PINCTRL_PIN(13, "EMMC_CLK"), + PINCTRL_PIN(14, "EMMC_CMD"), + PINCTRL_PIN(15, "EMMC_D0"), + PINCTRL_PIN(16, "EMMC_D1"), + PINCTRL_PIN(17, "EMMC_D2"), + PINCTRL_PIN(18, "EMMC_D3"), + PINCTRL_PIN(19, "EMMC_D4"), + PINCTRL_PIN(20, "EMMC_D5"), + PINCTRL_PIN(21, "EMMC_D6"), + PINCTRL_PIN(22, "EMMC_D7"), + PINCTRL_PIN(23, "EMMC_RST_N"), + PINCTRL_PIN(24, "EMMC_RCLK"), + /* SDIO (20 pins) */ + PINCTRL_PIN(25, "GP77_SD_CD"), + PINCTRL_PIN(26, "GP78_SD_CLK"), + PINCTRL_PIN(27, "GP79_SD_CMD"), + PINCTRL_PIN(28, "GP80_SD_D0"), + PINCTRL_PIN(29, "GP81_SD_D1"), + PINCTRL_PIN(30, "GP82_SD_D2"), + PINCTRL_PIN(31, "GP83_SD_D3"), + PINCTRL_PIN(32, "GP84_SD_LS_CLK_FB"), + PINCTRL_PIN(33, "GP85_SD_LS_CMD_DIR"), + PINCTRL_PIN(34, "GP86_SD_LS_D_DIR"), + PINCTRL_PIN(35, "GP88_SD_LS_SEL"), + PINCTRL_PIN(36, "GP87_SD_PD"), + PINCTRL_PIN(37, "GP89_SD_WP"), + PINCTRL_PIN(38, "GP90_SDIO_CLK"), + PINCTRL_PIN(39, "GP91_SDIO_CMD"), + PINCTRL_PIN(40, "GP92_SDIO_D0"), + PINCTRL_PIN(41, "GP93_SDIO_D1"), + PINCTRL_PIN(42, "GP94_SDIO_D2"), + PINCTRL_PIN(43, "GP95_SDIO_D3"), + PINCTRL_PIN(44, "GP96_SDIO_PD"), + /* HSI (8 pins) */ + PINCTRL_PIN(45, "HSI_ACDATA"), + PINCTRL_PIN(46, "HSI_ACFLAG"), + PINCTRL_PIN(47, "HSI_ACREADY"), + PINCTRL_PIN(48, "HSI_ACWAKE"), + PINCTRL_PIN(49, "HSI_CADATA"), + PINCTRL_PIN(50, "HSI_CAFLAG"), + PINCTRL_PIN(51, "HSI_CAREADY"), + PINCTRL_PIN(52, "HSI_CAWAKE"), + /* SSP Audio (14 pins) */ + PINCTRL_PIN(53, "GP70"), + PINCTRL_PIN(54, "GP71"), + PINCTRL_PIN(55, "GP32_I2S_0_CLK"), + PINCTRL_PIN(56, "GP33_I2S_0_FS"), + PINCTRL_PIN(57, "GP34_I2S_0_RXD"), + PINCTRL_PIN(58, "GP35_I2S_0_TXD"), + PINCTRL_PIN(59, "GP36_I2S_1_CLK"), + PINCTRL_PIN(60, "GP37_I2S_1_FS"), + PINCTRL_PIN(61, "GP38_I2S_1_RXD"), + PINCTRL_PIN(62, "GP39_I2S_1_TXD"), + PINCTRL_PIN(63, "GP40_I2S_2_CLK"), + PINCTRL_PIN(64, "GP41_I2S_2_FS"), + PINCTRL_PIN(65, "GP42_I2S_2_RXD"), + PINCTRL_PIN(66, "GP43_I2S_2_TXD"), + /* GP SSP (22 pins) */ + PINCTRL_PIN(67, "GP120_SPI_0_CLK"), + PINCTRL_PIN(68, "GP121_SPI_0_SS"), + PINCTRL_PIN(69, "GP122_SPI_0_RXD"), + PINCTRL_PIN(70, "GP123_SPI_0_TXD"), + PINCTRL_PIN(71, "GP102_SPI_1_CLK"), + PINCTRL_PIN(72, "GP103_SPI_1_SS0"), + PINCTRL_PIN(73, "GP104_SPI_1_SS1"), + PINCTRL_PIN(74, "GP105_SPI_1_SS2"), + PINCTRL_PIN(75, "GP106_SPI_1_SS3"), + PINCTRL_PIN(76, "GP107_SPI_1_RXD"), + PINCTRL_PIN(77, "GP108_SPI_1_TXD"), + PINCTRL_PIN(78, "GP109_SPI_2_CLK"), + PINCTRL_PIN(79, "GP110_SPI_2_SS0"), + PINCTRL_PIN(80, "GP111_SPI_2_SS1"), + PINCTRL_PIN(81, "GP112_SPI_2_SS2"), + PINCTRL_PIN(82, "GP113_SPI_2_SS3"), + PINCTRL_PIN(83, "GP114_SPI_2_RXD"), + PINCTRL_PIN(84, "GP115_SPI_2_TXD"), + PINCTRL_PIN(85, "GP116_SPI_3_CLK"), + PINCTRL_PIN(86, "GP117_SPI_3_SS"), + PINCTRL_PIN(87, "GP118_SPI_3_RXD"), + PINCTRL_PIN(88, "GP119_SPI_3_TXD"), + /* I2C (20 pins) */ + PINCTRL_PIN(89, "I2C_0_SCL"), + PINCTRL_PIN(90, "I2C_0_SDA"), + PINCTRL_PIN(91, "GP19_I2C_1_SCL"), + PINCTRL_PIN(92, "GP20_I2C_1_SDA"), + PINCTRL_PIN(93, "GP21_I2C_2_SCL"), + PINCTRL_PIN(94, "GP22_I2C_2_SDA"), + PINCTRL_PIN(95, "GP17_I2C_3_SCL_HDMI"), + PINCTRL_PIN(96, "GP18_I2C_3_SDA_HDMI"), + PINCTRL_PIN(97, "GP23_I2C_4_SCL"), + PINCTRL_PIN(98, "GP24_I2C_4_SDA"), + PINCTRL_PIN(99, "GP25_I2C_5_SCL"), + PINCTRL_PIN(100, "GP26_I2C_5_SDA"), + PINCTRL_PIN(101, "GP27_I2C_6_SCL"), + PINCTRL_PIN(102, "GP28_I2C_6_SDA"), + PINCTRL_PIN(103, "GP29_I2C_7_SCL"), + PINCTRL_PIN(104, "GP30_I2C_7_SDA"), + PINCTRL_PIN(105, "I2C_8_SCL"), + PINCTRL_PIN(106, "I2C_8_SDA"), + PINCTRL_PIN(107, "I2C_9_SCL"), + PINCTRL_PIN(108, "I2C_9_SDA"), + /* UART (23 pins) */ + PINCTRL_PIN(109, "GP124_UART_0_CTS"), + PINCTRL_PIN(110, "GP125_UART_0_RTS"), + PINCTRL_PIN(111, "GP126_UART_0_RX"), + PINCTRL_PIN(112, "GP127_UART_0_TX"), + PINCTRL_PIN(113, "GP128_UART_1_CTS"), + PINCTRL_PIN(114, "GP129_UART_1_RTS"), + PINCTRL_PIN(115, "GP130_UART_1_RX"), + PINCTRL_PIN(116, "GP131_UART_1_TX"), + PINCTRL_PIN(117, "GP132_UART_2_CTS"), + PINCTRL_PIN(118, "GP133_UART_2_RTS"), + PINCTRL_PIN(119, "GP134_UART_2_RX"), + PINCTRL_PIN(120, "GP135_UART_2_TX"), + PINCTRL_PIN(121, "GP97"), + PINCTRL_PIN(122, "GP154"), + PINCTRL_PIN(123, "GP155"), + PINCTRL_PIN(124, "GP156"), + PINCTRL_PIN(125, "GP157"), + PINCTRL_PIN(126, "GP158"), + PINCTRL_PIN(127, "GP159"), + PINCTRL_PIN(128, "GP160"), + PINCTRL_PIN(129, "GP161"), + PINCTRL_PIN(130, "GP12_PWM0"), + PINCTRL_PIN(131, "GP13_PWM1"), + /* GPIO South (20 pins) */ + PINCTRL_PIN(132, "GP176"), + PINCTRL_PIN(133, "GP177"), + PINCTRL_PIN(134, "GP178"), + PINCTRL_PIN(135, "GP179"), + PINCTRL_PIN(136, "GP180"), + PINCTRL_PIN(137, "GP181"), + PINCTRL_PIN(138, "GP182_PWM2"), + PINCTRL_PIN(139, "GP183_PWM3"), + PINCTRL_PIN(140, "GP184"), + PINCTRL_PIN(141, "GP185"), + PINCTRL_PIN(142, "GP186"), + PINCTRL_PIN(143, "GP187"), + PINCTRL_PIN(144, "GP188"), + PINCTRL_PIN(145, "GP189"), + PINCTRL_PIN(146, "GP190"), + PINCTRL_PIN(147, "GP191"), + PINCTRL_PIN(148, "GP14"), + PINCTRL_PIN(149, "GP15"), + PINCTRL_PIN(150, "GP162"), + PINCTRL_PIN(151, "GP163"), + /* Camera Sideband (15 pins) */ + PINCTRL_PIN(152, "GP0"), + PINCTRL_PIN(153, "GP1"), + PINCTRL_PIN(154, "GP2"), + PINCTRL_PIN(155, "GP3"), + PINCTRL_PIN(156, "GP4"), + PINCTRL_PIN(157, "GP5"), + PINCTRL_PIN(158, "GP6"), + PINCTRL_PIN(159, "GP7"), + PINCTRL_PIN(160, "GP8"), + PINCTRL_PIN(161, "GP9"), + PINCTRL_PIN(162, "GP10"), + PINCTRL_PIN(163, "GP11"), + PINCTRL_PIN(164, "GP16_HDMI_HPD"), + PINCTRL_PIN(165, "GP68_DSI_A_TE"), + PINCTRL_PIN(166, "GP69_DSI_C_TE"), + /* Clock (14 pins) */ + PINCTRL_PIN(167, "GP137"), + PINCTRL_PIN(168, "GP138"), + PINCTRL_PIN(169, "GP139"), + PINCTRL_PIN(170, "GP140"), + PINCTRL_PIN(171, "GP141"), + PINCTRL_PIN(172, "GP142"), + PINCTRL_PIN(173, "GP98"), + PINCTRL_PIN(174, "OSC_CLK_CTRL0"), + PINCTRL_PIN(175, "OSC_CLK_CTRL1"), + PINCTRL_PIN(176, "OSC_CLK0"), + PINCTRL_PIN(177, "OSC_CLK1"), + PINCTRL_PIN(178, "OSC_CLK2"), + PINCTRL_PIN(179, "OSC_CLK3"), + PINCTRL_PIN(180, "OSC_CLK4"), + /* PMIC (15 pins) */ + PINCTRL_PIN(181, "PROCHOT"), + PINCTRL_PIN(182, "RESETOUT"), + PINCTRL_PIN(183, "RTC_CLK"), + PINCTRL_PIN(184, "STANDBY"), + PINCTRL_PIN(185, "SVID_ALERT"), + PINCTRL_PIN(186, "SVID_CLK"), + PINCTRL_PIN(187, "SVID_D"), + PINCTRL_PIN(188, "THERMTRIP"), + PINCTRL_PIN(189, "PREQ"), + PINCTRL_PIN(190, "ZQ_A"), + PINCTRL_PIN(191, "ZQ_B"), + PINCTRL_PIN(192, "GP64_FAST_INT0"), + PINCTRL_PIN(193, "GP65_FAST_INT1"), + PINCTRL_PIN(194, "GP66_FAST_INT2"), + PINCTRL_PIN(195, "GP67_FAST_INT3"), + /* Keyboard (20 pins) */ + PINCTRL_PIN(196, "GP44"), + PINCTRL_PIN(197, "GP45"), + PINCTRL_PIN(198, "GP46"), + PINCTRL_PIN(199, "GP47"), + PINCTRL_PIN(200, "GP48"), + PINCTRL_PIN(201, "GP49"), + PINCTRL_PIN(202, "GP50"), + PINCTRL_PIN(203, "GP51"), + PINCTRL_PIN(204, "GP52"), + PINCTRL_PIN(205, "GP53"), + PINCTRL_PIN(206, "GP54"), + PINCTRL_PIN(207, "GP55"), + PINCTRL_PIN(208, "GP56"), + PINCTRL_PIN(209, "GP57"), + PINCTRL_PIN(210, "GP58"), + PINCTRL_PIN(211, "GP59"), + PINCTRL_PIN(212, "GP60"), + PINCTRL_PIN(213, "GP61"), + PINCTRL_PIN(214, "GP62"), + PINCTRL_PIN(215, "GP63"), + /* GPIO North (13 pins) */ + PINCTRL_PIN(216, "GP164"), + PINCTRL_PIN(217, "GP165"), + PINCTRL_PIN(218, "GP166"), + PINCTRL_PIN(219, "GP167"), + PINCTRL_PIN(220, "GP168_MJTAG_TCK"), + PINCTRL_PIN(221, "GP169_MJTAG_TDI"), + PINCTRL_PIN(222, "GP170_MJTAG_TDO"), + PINCTRL_PIN(223, "GP171_MJTAG_TMS"), + PINCTRL_PIN(224, "GP172_MJTAG_TRST"), + PINCTRL_PIN(225, "GP173"), + PINCTRL_PIN(226, "GP174"), + PINCTRL_PIN(227, "GP175"), + PINCTRL_PIN(228, "GP176"), + /* PTI (22 pins) */ + PINCTRL_PIN(229, "GP72_PTI_CLK"), + PINCTRL_PIN(230, "GP73_PTI_D0"), + PINCTRL_PIN(231, "GP74_PTI_D1"), + PINCTRL_PIN(232, "GP75_PTI_D2"), + PINCTRL_PIN(233, "GP76_PTI_D3"), + PINCTRL_PIN(234, "GP164"), + PINCTRL_PIN(235, "GP165"), + PINCTRL_PIN(236, "GP166"), + PINCTRL_PIN(237, "GP167"), + PINCTRL_PIN(238, "GP168_MJTAG_TCK"), + PINCTRL_PIN(239, "GP169_MJTAG_TDI"), + PINCTRL_PIN(240, "GP170_MJTAG_TDO"), + PINCTRL_PIN(241, "GP171_MJTAG_TMS"), + PINCTRL_PIN(242, "GP172_MJTAG_TRST"), + PINCTRL_PIN(243, "GP173"), + PINCTRL_PIN(244, "GP174"), + PINCTRL_PIN(245, "GP175"), + PINCTRL_PIN(246, "JTAG_TCK"), + PINCTRL_PIN(247, "JTAG_TDI"), + PINCTRL_PIN(248, "JTAG_TDO"), + PINCTRL_PIN(249, "JTAG_TMS"), + PINCTRL_PIN(250, "JTAG_TRST"), +}; + +static const struct mofld_family mofld_families[] = { + MOFLD_FAMILY(0, 0, 12), + MOFLD_FAMILY(1, 13, 24), + MOFLD_FAMILY(2, 25, 44), + MOFLD_FAMILY(3, 45, 52), + MOFLD_FAMILY(4, 53, 66), + MOFLD_FAMILY(5, 67, 88), + MOFLD_FAMILY(6, 89, 108), + MOFLD_FAMILY(7, 109, 131), + MOFLD_FAMILY(8, 132, 151), + MOFLD_FAMILY(9, 152, 166), + MOFLD_FAMILY(10, 167, 180), + MOFLD_FAMILY(11, 181, 195), + MOFLD_FAMILY(12, 196, 215), + MOFLD_FAMILY(13, 216, 228), + MOFLD_FAMILY(14, 229, 250), +}; + +/** + * struct mofld_pinctrl - Intel Merrifield pinctrl private structure + * @dev: Pointer to the device structure + * @lock: Lock to serialize register access + * @pctldesc: Pin controller description + * @pctldev: Pointer to the pin controller device + * @families: Array of families this pinctrl handles + * @nfamilies: Number of families in the array + * @functions: Array of functions + * @nfunctions: Number of functions in the array + * @groups: Array of pin groups + * @ngroups: Number of groups in the array + * @pins: Array of pins this pinctrl controls + * @npins: Number of pins in the array + */ +struct mofld_pinctrl { + struct device *dev; + raw_spinlock_t lock; + struct pinctrl_desc pctldesc; + struct pinctrl_dev *pctldev; + + /* Pin controller configuration */ + const struct mofld_family *families; + size_t nfamilies; + const struct intel_function *functions; + size_t nfunctions; + const struct intel_pingroup *groups; + size_t ngroups; + const struct pinctrl_pin_desc *pins; + size_t npins; +}; + +#define pin_to_bufno(f, p) ((p) - (f)->pin_base) + +static const struct mofld_family *mofld_get_family(struct mofld_pinctrl *mp, unsigned int pin) +{ + const struct mofld_family *family; + unsigned int i; + + for (i = 0; i < mp->nfamilies; i++) { + family = &mp->families[i]; + if (pin >= family->pin_base && + pin < family->pin_base + family->npins) + return family; + } + + dev_warn(mp->dev, "failed to find family for pin %u\n", pin); + return NULL; +} + +static bool mofld_buf_available(struct mofld_pinctrl *mp, unsigned int pin) +{ + const struct mofld_family *family; + + family = mofld_get_family(mp, pin); + if (!family) + return false; + + return !family->protected; +} + +static void __iomem *mofld_get_bufcfg(struct mofld_pinctrl *mp, unsigned int pin) +{ + const struct mofld_family *family; + unsigned int bufno; + + family = mofld_get_family(mp, pin); + if (!family) + return NULL; + + bufno = pin_to_bufno(family, pin); + return family->regs + BUFCFG_OFFSET + bufno * 4; +} + +static int mofld_read_bufcfg(struct mofld_pinctrl *mp, unsigned int pin, u32 *value) +{ + void __iomem *bufcfg; + + if (!mofld_buf_available(mp, pin)) + return -EBUSY; + + bufcfg = mofld_get_bufcfg(mp, pin); + *value = readl(bufcfg); + + return 0; +} + +static void mofld_update_bufcfg(struct mofld_pinctrl *mp, unsigned int pin, u32 bits, u32 mask) +{ + void __iomem *bufcfg; + u32 value; + + bufcfg = mofld_get_bufcfg(mp, pin); + value = readl(bufcfg); + + value &= ~mask; + value |= bits & mask; + + writel(value, bufcfg); +} + +static int mofld_get_groups_count(struct pinctrl_dev *pctldev) +{ + struct mofld_pinctrl *mp = pinctrl_dev_get_drvdata(pctldev); + + return mp->ngroups; +} + +static const char *mofld_get_group_name(struct pinctrl_dev *pctldev, unsigned int group) +{ + struct mofld_pinctrl *mp = pinctrl_dev_get_drvdata(pctldev); + + return mp->groups[group].grp.name; +} + +static int mofld_get_group_pins(struct pinctrl_dev *pctldev, unsigned int group, + const unsigned int **pins, unsigned int *npins) +{ + struct mofld_pinctrl *mp = pinctrl_dev_get_drvdata(pctldev); + + *pins = mp->groups[group].grp.pins; + *npins = mp->groups[group].grp.npins; + return 0; +} + +static void mofld_pin_dbg_show(struct pinctrl_dev *pctldev, struct seq_file *s, + unsigned int pin) +{ + struct mofld_pinctrl *mp = pinctrl_dev_get_drvdata(pctldev); + u32 value, mode; + int ret; + + ret = mofld_read_bufcfg(mp, pin, &value); + if (ret) { + seq_puts(s, "not available"); + return; + } + + mode = (value & BUFCFG_PINMODE_MASK) >> BUFCFG_PINMODE_SHIFT; + if (!mode) + seq_puts(s, "GPIO "); + else + seq_printf(s, "mode %d ", mode); + + seq_printf(s, "0x%08x", value); +} + +static const struct pinctrl_ops mofld_pinctrl_ops = { + .get_groups_count = mofld_get_groups_count, + .get_group_name = mofld_get_group_name, + .get_group_pins = mofld_get_group_pins, + .pin_dbg_show = mofld_pin_dbg_show, +}; + +static int mofld_get_functions_count(struct pinctrl_dev *pctldev) +{ + struct mofld_pinctrl *mp = pinctrl_dev_get_drvdata(pctldev); + + return mp->nfunctions; +} + +static const char *mofld_get_function_name(struct pinctrl_dev *pctldev, unsigned int function) +{ + struct mofld_pinctrl *mp = pinctrl_dev_get_drvdata(pctldev); + + return mp->functions[function].name; +} + +static int mofld_get_function_groups(struct pinctrl_dev *pctldev, unsigned int function, + const char * const **groups, unsigned int * const ngroups) +{ + struct mofld_pinctrl *mp = pinctrl_dev_get_drvdata(pctldev); + + *groups = mp->functions[function].groups; + *ngroups = mp->functions[function].ngroups; + return 0; +} + +static int mofld_pinmux_set_mux(struct pinctrl_dev *pctldev, unsigned int function, + unsigned int group) +{ + struct mofld_pinctrl *mp = pinctrl_dev_get_drvdata(pctldev); + const struct intel_pingroup *grp = &mp->groups[group]; + u32 bits = grp->mode << BUFCFG_PINMODE_SHIFT; + u32 mask = BUFCFG_PINMODE_MASK; + unsigned long flags; + unsigned int i; + + /* + * All pins in the groups needs to be accessible and writable + * before we can enable the mux for this group. + */ + for (i = 0; i < grp->grp.npins; i++) { + if (!mofld_buf_available(mp, grp->grp.pins[i])) + return -EBUSY; + } + + /* Now enable the mux setting for each pin in the group */ + raw_spin_lock_irqsave(&mp->lock, flags); + for (i = 0; i < grp->grp.npins; i++) + mofld_update_bufcfg(mp, grp->grp.pins[i], bits, mask); + raw_spin_unlock_irqrestore(&mp->lock, flags); + + return 0; +} + +static int mofld_gpio_request_enable(struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *range, + unsigned int pin) +{ + struct mofld_pinctrl *mp = pinctrl_dev_get_drvdata(pctldev); + u32 bits = BUFCFG_PINMODE_GPIO << BUFCFG_PINMODE_SHIFT; + u32 mask = BUFCFG_PINMODE_MASK; + unsigned long flags; + + if (!mofld_buf_available(mp, pin)) + return -EBUSY; + + raw_spin_lock_irqsave(&mp->lock, flags); + mofld_update_bufcfg(mp, pin, bits, mask); + raw_spin_unlock_irqrestore(&mp->lock, flags); + + return 0; +} + +static const struct pinmux_ops mofld_pinmux_ops = { + .get_functions_count = mofld_get_functions_count, + .get_function_name = mofld_get_function_name, + .get_function_groups = mofld_get_function_groups, + .set_mux = mofld_pinmux_set_mux, + .gpio_request_enable = mofld_gpio_request_enable, +}; + +static int mofld_config_get(struct pinctrl_dev *pctldev, unsigned int pin, + unsigned long *config) +{ + struct mofld_pinctrl *mp = pinctrl_dev_get_drvdata(pctldev); + enum pin_config_param param = pinconf_to_config_param(*config); + u32 value, term; + u16 arg = 0; + int ret; + + ret = mofld_read_bufcfg(mp, pin, &value); + if (ret) + return -ENOTSUPP; + + term = (value & BUFCFG_PUPD_VAL_MASK) >> BUFCFG_PUPD_VAL_SHIFT; + + switch (param) { + case PIN_CONFIG_BIAS_DISABLE: + if (value & BUFCFG_Px_EN_MASK) + return -EINVAL; + break; + + case PIN_CONFIG_BIAS_PULL_UP: + if ((value & BUFCFG_Px_EN_MASK) != BUFCFG_PU_EN) + return -EINVAL; + + switch (term) { + case BUFCFG_PUPD_VAL_910: + arg = 910; + break; + case BUFCFG_PUPD_VAL_2K: + arg = 2000; + break; + case BUFCFG_PUPD_VAL_20K: + arg = 20000; + break; + case BUFCFG_PUPD_VAL_50K: + arg = 50000; + break; + } + + break; + + case PIN_CONFIG_BIAS_PULL_DOWN: + if ((value & BUFCFG_Px_EN_MASK) != BUFCFG_PD_EN) + return -EINVAL; + + switch (term) { + case BUFCFG_PUPD_VAL_910: + arg = 910; + break; + case BUFCFG_PUPD_VAL_2K: + arg = 2000; + break; + case BUFCFG_PUPD_VAL_20K: + arg = 20000; + break; + case BUFCFG_PUPD_VAL_50K: + arg = 50000; + break; + } + + break; + + case PIN_CONFIG_DRIVE_OPEN_DRAIN: + if (!(value & BUFCFG_OD_EN)) + return -EINVAL; + break; + + case PIN_CONFIG_SLEW_RATE: + if (!(value & BUFCFG_SLEWSEL)) + arg = 0; + else + arg = 1; + break; + + default: + return -ENOTSUPP; + } + + *config = pinconf_to_config_packed(param, arg); + return 0; +} + +static int mofld_config_set_pin(struct mofld_pinctrl *mp, unsigned int pin, + unsigned long config) +{ + unsigned int param = pinconf_to_config_param(config); + unsigned int arg = pinconf_to_config_argument(config); + u32 bits = 0, mask = 0; + unsigned long flags; + + switch (param) { + case PIN_CONFIG_BIAS_DISABLE: + mask |= BUFCFG_Px_EN_MASK | BUFCFG_PUPD_VAL_MASK; + break; + + case PIN_CONFIG_BIAS_PULL_UP: + mask |= BUFCFG_Px_EN_MASK | BUFCFG_PUPD_VAL_MASK; + bits |= BUFCFG_PU_EN; + + switch (arg) { + case 50000: + bits |= BUFCFG_PUPD_VAL_50K << BUFCFG_PUPD_VAL_SHIFT; + break; + case 20000: + bits |= BUFCFG_PUPD_VAL_20K << BUFCFG_PUPD_VAL_SHIFT; + break; + case 2000: + bits |= BUFCFG_PUPD_VAL_2K << BUFCFG_PUPD_VAL_SHIFT; + break; + default: + return -EINVAL; + } + + break; + + case PIN_CONFIG_BIAS_PULL_DOWN: + mask |= BUFCFG_Px_EN_MASK | BUFCFG_PUPD_VAL_MASK; + bits |= BUFCFG_PD_EN; + + switch (arg) { + case 50000: + bits |= BUFCFG_PUPD_VAL_50K << BUFCFG_PUPD_VAL_SHIFT; + break; + case 20000: + bits |= BUFCFG_PUPD_VAL_20K << BUFCFG_PUPD_VAL_SHIFT; + break; + case 2000: + bits |= BUFCFG_PUPD_VAL_2K << BUFCFG_PUPD_VAL_SHIFT; + break; + default: + return -EINVAL; + } + + break; + + case PIN_CONFIG_DRIVE_OPEN_DRAIN: + mask |= BUFCFG_OD_EN; + if (arg) + bits |= BUFCFG_OD_EN; + break; + + case PIN_CONFIG_SLEW_RATE: + mask |= BUFCFG_SLEWSEL; + if (arg) + bits |= BUFCFG_SLEWSEL; + break; + } + + raw_spin_lock_irqsave(&mp->lock, flags); + mofld_update_bufcfg(mp, pin, bits, mask); + raw_spin_unlock_irqrestore(&mp->lock, flags); + + return 0; +} + +static int mofld_config_set(struct pinctrl_dev *pctldev, unsigned int pin, + unsigned long *configs, unsigned int nconfigs) +{ + struct mofld_pinctrl *mp = pinctrl_dev_get_drvdata(pctldev); + unsigned int i; + int ret; + + if (!mofld_buf_available(mp, pin)) + return -ENOTSUPP; + + for (i = 0; i < nconfigs; i++) { + switch (pinconf_to_config_param(configs[i])) { + case PIN_CONFIG_BIAS_DISABLE: + case PIN_CONFIG_BIAS_PULL_UP: + case PIN_CONFIG_BIAS_PULL_DOWN: + case PIN_CONFIG_DRIVE_OPEN_DRAIN: + case PIN_CONFIG_SLEW_RATE: + ret = mofld_config_set_pin(mp, pin, configs[i]); + if (ret) + return ret; + break; + + default: + return -ENOTSUPP; + } + } + + return 0; +} + +static int mofld_config_group_get(struct pinctrl_dev *pctldev, unsigned int group, + unsigned long *config) +{ + const unsigned int *pins; + unsigned int npins; + int ret; + + ret = mofld_get_group_pins(pctldev, group, &pins, &npins); + if (ret) + return ret; + + ret = mofld_config_get(pctldev, pins[0], config); + if (ret) + return ret; + + return 0; +} + +static int mofld_config_group_set(struct pinctrl_dev *pctldev, unsigned int group, + unsigned long *configs, unsigned int num_configs) +{ + const unsigned int *pins; + unsigned int npins; + int i, ret; + + ret = mofld_get_group_pins(pctldev, group, &pins, &npins); + if (ret) + return ret; + + for (i = 0; i < npins; i++) { + ret = mofld_config_set(pctldev, pins[i], configs, num_configs); + if (ret) + return ret; + } + + return 0; +} + +static const struct pinconf_ops mofld_pinconf_ops = { + .is_generic = true, + .pin_config_get = mofld_config_get, + .pin_config_set = mofld_config_set, + .pin_config_group_get = mofld_config_group_get, + .pin_config_group_set = mofld_config_group_set, +}; + +static const struct pinctrl_desc mofld_pinctrl_desc = { + .pctlops = &mofld_pinctrl_ops, + .pmxops = &mofld_pinmux_ops, + .confops = &mofld_pinconf_ops, + .owner = THIS_MODULE, +}; + +static int mofld_pinctrl_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct mofld_family *families; + struct mofld_pinctrl *mp; + void __iomem *regs; + size_t nfamilies; + unsigned int i; + + mp = devm_kzalloc(dev, sizeof(*mp), GFP_KERNEL); + if (!mp) + return -ENOMEM; + + mp->dev = dev; + raw_spin_lock_init(&mp->lock); + + regs = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(regs)) + return PTR_ERR(regs); + + nfamilies = ARRAY_SIZE(mofld_families), + families = devm_kmemdup(dev, mofld_families, sizeof(mofld_families), GFP_KERNEL); + if (!families) + return -ENOMEM; + + /* Splice memory resource by chunk per family */ + for (i = 0; i < nfamilies; i++) { + struct mofld_family *family = &families[i]; + + family->regs = regs + family->barno * MOFLD_FAMILY_LEN; + } + + mp->families = families; + mp->nfamilies = nfamilies; + mp->pctldesc = mofld_pinctrl_desc; + mp->pctldesc.name = dev_name(dev); + mp->pctldesc.pins = mofld_pins; + mp->pctldesc.npins = ARRAY_SIZE(mofld_pins); + + mp->pctldev = devm_pinctrl_register(dev, &mp->pctldesc, mp); + if (IS_ERR(mp->pctldev)) + return PTR_ERR(mp->pctldev); + + platform_set_drvdata(pdev, mp); + return 0; +} + +static const struct acpi_device_id mofld_acpi_table[] = { + { "INTC1003" }, + { } +}; +MODULE_DEVICE_TABLE(acpi, mofld_acpi_table); + +static struct platform_driver mofld_pinctrl_driver = { + .probe = mofld_pinctrl_probe, + .driver = { + .name = "pinctrl-moorefield", + .acpi_match_table = mofld_acpi_table, + }, +}; + +static int __init mofld_pinctrl_init(void) +{ + return platform_driver_register(&mofld_pinctrl_driver); +} +subsys_initcall(mofld_pinctrl_init); + +static void __exit mofld_pinctrl_exit(void) +{ + platform_driver_unregister(&mofld_pinctrl_driver); +} +module_exit(mofld_pinctrl_exit); + +MODULE_AUTHOR("Andy Shevchenko <andriy.shevchenko@linux.intel.com>"); +MODULE_DESCRIPTION("Intel Moorefield SoC pinctrl driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:pinctrl-moorefield"); diff --git a/drivers/pinctrl/intel/pinctrl-sunrisepoint.c b/drivers/pinctrl/intel/pinctrl-sunrisepoint.c index 14eac924d43d63..292b660067e975 100644 --- a/drivers/pinctrl/intel/pinctrl-sunrisepoint.c +++ b/drivers/pinctrl/intel/pinctrl-sunrisepoint.c @@ -22,24 +22,24 @@ #define SPT_GPI_IS 0x100 #define SPT_GPI_IE 0x120 -#define SPT_COMMUNITY(b, s, e, pl, gs, gn, g, n) \ - { \ - .barno = (b), \ - .padown_offset = SPT_PAD_OWN, \ - .padcfglock_offset = (pl), \ - .hostown_offset = SPT_HOSTSW_OWN, \ - .is_offset = SPT_GPI_IS, \ - .ie_offset = SPT_GPI_IE, \ - .gpp_size = (gs), \ - .gpp_num_padown_regs = (gn), \ - .pin_base = (s), \ - .npins = ((e) - (s) + 1), \ - .gpps = (g), \ - .ngpps = (n), \ +#define SPT_COMMUNITY(b, s, e, g, n, v, gs, gn) \ + { \ + .barno = (b), \ + .padown_offset = SPT_PAD_OWN, \ + .padcfglock_offset = SPT_##v##_PADCFGLOCK, \ + .hostown_offset = SPT_HOSTSW_OWN, \ + .is_offset = SPT_GPI_IS, \ + .ie_offset = SPT_GPI_IE, \ + .gpp_size = (gs), \ + .gpp_num_padown_regs = (gn), \ + .pin_base = (s), \ + .npins = ((e) - (s) + 1), \ + .gpps = (g), \ + .ngpps = (n), \ } #define SPT_LP_COMMUNITY(b, s, e) \ - SPT_COMMUNITY(b, s, e, SPT_LP_PADCFGLOCK, 24, 4, NULL, 0) + SPT_COMMUNITY(b, s, e, NULL, 0, LP, 24, 4) #define SPT_H_GPP(r, s, e, g) \ { \ @@ -50,7 +50,7 @@ } #define SPT_H_COMMUNITY(b, s, e, g) \ - SPT_COMMUNITY(b, s, e, SPT_H_PADCFGLOCK, 0, 0, g, ARRAY_SIZE(g)) + SPT_COMMUNITY(b, s, e, g, ARRAY_SIZE(g), H, 0, 0) /* Sunrisepoint-LP */ static const struct pinctrl_pin_desc sptlp_pins[] = { diff --git a/drivers/pinctrl/intel/pinctrl-tigerlake.c b/drivers/pinctrl/intel/pinctrl-tigerlake.c index 3ddaeffc04150a..431352fa2ab520 100644 --- a/drivers/pinctrl/intel/pinctrl-tigerlake.c +++ b/drivers/pinctrl/intel/pinctrl-tigerlake.c @@ -31,25 +31,25 @@ .gpio_base = (g), \ } -#define TGL_COMMUNITY(b, s, e, pl, ho, g) \ - { \ - .barno = (b), \ - .padown_offset = TGL_PAD_OWN, \ - .padcfglock_offset = (pl), \ - .hostown_offset = (ho), \ - .is_offset = TGL_GPI_IS, \ - .ie_offset = TGL_GPI_IE, \ - .pin_base = (s), \ - .npins = ((e) - (s) + 1), \ - .gpps = (g), \ - .ngpps = ARRAY_SIZE(g), \ +#define TGL_COMMUNITY(b, s, e, g, v) \ + { \ + .barno = (b), \ + .padown_offset = TGL_PAD_OWN, \ + .padcfglock_offset = TGL_##v##_PADCFGLOCK, \ + .hostown_offset = TGL_##v##_HOSTSW_OWN, \ + .is_offset = TGL_GPI_IS, \ + .ie_offset = TGL_GPI_IE, \ + .pin_base = (s), \ + .npins = ((e) - (s) + 1), \ + .gpps = (g), \ + .ngpps = ARRAY_SIZE(g), \ } #define TGL_LP_COMMUNITY(b, s, e, g) \ - TGL_COMMUNITY(b, s, e, TGL_LP_PADCFGLOCK, TGL_LP_HOSTSW_OWN, g) + TGL_COMMUNITY(b, s, e, g, LP) #define TGL_H_COMMUNITY(b, s, e, g) \ - TGL_COMMUNITY(b, s, e, TGL_H_PADCFGLOCK, TGL_H_HOSTSW_OWN, g) + TGL_COMMUNITY(b, s, e, g, H) /* Tiger Lake-LP */ static const struct pinctrl_pin_desc tgllp_pins[] = { diff --git a/drivers/pinctrl/mediatek/pinctrl-moore.c b/drivers/pinctrl/mediatek/pinctrl-moore.c index 526faaebaf77c0..1ec0413959e156 100644 --- a/drivers/pinctrl/mediatek/pinctrl-moore.c +++ b/drivers/pinctrl/mediatek/pinctrl-moore.c @@ -8,7 +8,11 @@ * */ +#include <dt-bindings/pinctrl/mt65xx.h> #include <linux/gpio/driver.h> + +#include <linux/pinctrl/consumer.h> + #include "pinctrl-moore.h" #define PINCTRL_PINCTRL_DEV KBUILD_MODNAME @@ -105,7 +109,7 @@ static int mtk_pinconf_get(struct pinctrl_dev *pctldev, { struct mtk_pinctrl *hw = pinctrl_dev_get_drvdata(pctldev); u32 param = pinconf_to_config_param(*config); - int val, val2, err, reg, ret = 1; + int val, val2, err, pullup, reg, ret = 1; const struct mtk_pin_desc *desc; desc = (const struct mtk_pin_desc *)&hw->soc->pins[pin]; @@ -114,7 +118,13 @@ static int mtk_pinconf_get(struct pinctrl_dev *pctldev, switch (param) { case PIN_CONFIG_BIAS_DISABLE: - if (hw->soc->bias_disable_get) { + if (hw->soc->bias_get_combo) { + err = hw->soc->bias_get_combo(hw, desc, &pullup, &ret); + if (err) + return err; + if (ret != MTK_PUPD_SET_R1R0_00 && ret != MTK_DISABLE) + return -EINVAL; + } else if (hw->soc->bias_disable_get) { err = hw->soc->bias_disable_get(hw, desc, &ret); if (err) return err; @@ -123,7 +133,15 @@ static int mtk_pinconf_get(struct pinctrl_dev *pctldev, } break; case PIN_CONFIG_BIAS_PULL_UP: - if (hw->soc->bias_get) { + if (hw->soc->bias_get_combo) { + err = hw->soc->bias_get_combo(hw, desc, &pullup, &ret); + if (err) + return err; + if (ret == MTK_PUPD_SET_R1R0_00 || ret == MTK_DISABLE) + return -EINVAL; + if (!pullup) + return -EINVAL; + } else if (hw->soc->bias_get) { err = hw->soc->bias_get(hw, desc, 1, &ret); if (err) return err; @@ -132,7 +150,15 @@ static int mtk_pinconf_get(struct pinctrl_dev *pctldev, } break; case PIN_CONFIG_BIAS_PULL_DOWN: - if (hw->soc->bias_get) { + if (hw->soc->bias_get_combo) { + err = hw->soc->bias_get_combo(hw, desc, &pullup, &ret); + if (err) + return err; + if (ret == MTK_PUPD_SET_R1R0_00 || ret == MTK_DISABLE) + return -EINVAL; + if (pullup) + return -EINVAL; + } else if (hw->soc->bias_get) { err = hw->soc->bias_get(hw, desc, 0, &ret); if (err) return err; @@ -235,7 +261,11 @@ static int mtk_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin, switch (param) { case PIN_CONFIG_BIAS_DISABLE: - if (hw->soc->bias_disable_set) { + if (hw->soc->bias_set_combo) { + err = hw->soc->bias_set_combo(hw, desc, 0, MTK_DISABLE); + if (err) + return err; + } else if (hw->soc->bias_disable_set) { err = hw->soc->bias_disable_set(hw, desc); if (err) return err; @@ -244,7 +274,11 @@ static int mtk_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin, } break; case PIN_CONFIG_BIAS_PULL_UP: - if (hw->soc->bias_set) { + if (hw->soc->bias_set_combo) { + err = hw->soc->bias_set_combo(hw, desc, 1, arg); + if (err) + return err; + } else if (hw->soc->bias_set) { err = hw->soc->bias_set(hw, desc, 1); if (err) return err; @@ -253,7 +287,11 @@ static int mtk_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin, } break; case PIN_CONFIG_BIAS_PULL_DOWN: - if (hw->soc->bias_set) { + if (hw->soc->bias_set_combo) { + err = hw->soc->bias_set_combo(hw, desc, 0, arg); + if (err) + return err; + } else if (hw->soc->bias_set) { err = hw->soc->bias_set(hw, desc, 0); if (err) return err; diff --git a/drivers/pinctrl/mediatek/pinctrl-mt7986.c b/drivers/pinctrl/mediatek/pinctrl-mt7986.c index 50cb736f9f1167..aa0ccd67f4f4ea 100644 --- a/drivers/pinctrl/mediatek/pinctrl-mt7986.c +++ b/drivers/pinctrl/mediatek/pinctrl-mt7986.c @@ -316,10 +316,10 @@ static const struct mtk_pin_field_calc mt7986_pin_pupd_range[] = { PIN_FIELD_BASE(38, 38, IOCFG_LT_BASE, 0x30, 0x10, 9, 1), PIN_FIELD_BASE(39, 40, IOCFG_RB_BASE, 0x60, 0x10, 18, 1), PIN_FIELD_BASE(41, 41, IOCFG_RB_BASE, 0x60, 0x10, 12, 1), - PIN_FIELD_BASE(42, 43, IOCFG_RB_BASE, 0x60, 0x10, 22, 1), - PIN_FIELD_BASE(44, 45, IOCFG_RB_BASE, 0x60, 0x10, 20, 1), - PIN_FIELD_BASE(46, 47, IOCFG_RB_BASE, 0x60, 0x10, 26, 1), - PIN_FIELD_BASE(48, 49, IOCFG_RB_BASE, 0x60, 0x10, 24, 1), + PIN_FIELD_BASE(42, 43, IOCFG_RB_BASE, 0x60, 0x10, 23, 1), + PIN_FIELD_BASE(44, 45, IOCFG_RB_BASE, 0x60, 0x10, 21, 1), + PIN_FIELD_BASE(46, 47, IOCFG_RB_BASE, 0x60, 0x10, 27, 1), + PIN_FIELD_BASE(48, 49, IOCFG_RB_BASE, 0x60, 0x10, 25, 1), PIN_FIELD_BASE(50, 57, IOCFG_RT_BASE, 0x40, 0x10, 2, 1), PIN_FIELD_BASE(58, 58, IOCFG_RT_BASE, 0x40, 0x10, 1, 1), PIN_FIELD_BASE(59, 59, IOCFG_RT_BASE, 0x40, 0x10, 0, 1), @@ -354,10 +354,10 @@ static const struct mtk_pin_field_calc mt7986_pin_r0_range[] = { PIN_FIELD_BASE(38, 38, IOCFG_LT_BASE, 0x40, 0x10, 9, 1), PIN_FIELD_BASE(39, 40, IOCFG_RB_BASE, 0x70, 0x10, 18, 1), PIN_FIELD_BASE(41, 41, IOCFG_RB_BASE, 0x70, 0x10, 12, 1), - PIN_FIELD_BASE(42, 43, IOCFG_RB_BASE, 0x70, 0x10, 22, 1), - PIN_FIELD_BASE(44, 45, IOCFG_RB_BASE, 0x70, 0x10, 20, 1), - PIN_FIELD_BASE(46, 47, IOCFG_RB_BASE, 0x70, 0x10, 26, 1), - PIN_FIELD_BASE(48, 49, IOCFG_RB_BASE, 0x70, 0x10, 24, 1), + PIN_FIELD_BASE(42, 43, IOCFG_RB_BASE, 0x70, 0x10, 23, 1), + PIN_FIELD_BASE(44, 45, IOCFG_RB_BASE, 0x70, 0x10, 21, 1), + PIN_FIELD_BASE(46, 47, IOCFG_RB_BASE, 0x70, 0x10, 27, 1), + PIN_FIELD_BASE(48, 49, IOCFG_RB_BASE, 0x70, 0x10, 25, 1), PIN_FIELD_BASE(50, 57, IOCFG_RT_BASE, 0x50, 0x10, 2, 1), PIN_FIELD_BASE(58, 58, IOCFG_RT_BASE, 0x50, 0x10, 1, 1), PIN_FIELD_BASE(59, 59, IOCFG_RT_BASE, 0x50, 0x10, 0, 1), @@ -392,10 +392,10 @@ static const struct mtk_pin_field_calc mt7986_pin_r1_range[] = { PIN_FIELD_BASE(38, 38, IOCFG_LT_BASE, 0x50, 0x10, 9, 1), PIN_FIELD_BASE(39, 40, IOCFG_RB_BASE, 0x80, 0x10, 18, 1), PIN_FIELD_BASE(41, 41, IOCFG_RB_BASE, 0x80, 0x10, 12, 1), - PIN_FIELD_BASE(42, 43, IOCFG_RB_BASE, 0x80, 0x10, 22, 1), - PIN_FIELD_BASE(44, 45, IOCFG_RB_BASE, 0x80, 0x10, 20, 1), - PIN_FIELD_BASE(46, 47, IOCFG_RB_BASE, 0x80, 0x10, 26, 1), - PIN_FIELD_BASE(48, 49, IOCFG_RB_BASE, 0x80, 0x10, 24, 1), + PIN_FIELD_BASE(42, 43, IOCFG_RB_BASE, 0x80, 0x10, 23, 1), + PIN_FIELD_BASE(44, 45, IOCFG_RB_BASE, 0x80, 0x10, 21, 1), + PIN_FIELD_BASE(46, 47, IOCFG_RB_BASE, 0x80, 0x10, 27, 1), + PIN_FIELD_BASE(48, 49, IOCFG_RB_BASE, 0x80, 0x10, 25, 1), PIN_FIELD_BASE(50, 57, IOCFG_RT_BASE, 0x60, 0x10, 2, 1), PIN_FIELD_BASE(58, 58, IOCFG_RT_BASE, 0x60, 0x10, 1, 1), PIN_FIELD_BASE(59, 59, IOCFG_RT_BASE, 0x60, 0x10, 0, 1), @@ -407,6 +407,60 @@ static const struct mtk_pin_field_calc mt7986_pin_r1_range[] = { PIN_FIELD_BASE(66, 68, IOCFG_LB_BASE, 0x60, 0x10, 2, 1), }; +static const unsigned int mt7986_pull_type[] = { + MTK_PULL_PUPD_R1R0_TYPE,/*0*/ MTK_PULL_PUPD_R1R0_TYPE,/*1*/ + MTK_PULL_PUPD_R1R0_TYPE,/*2*/ MTK_PULL_PUPD_R1R0_TYPE,/*3*/ + MTK_PULL_PUPD_R1R0_TYPE,/*4*/ MTK_PULL_PUPD_R1R0_TYPE,/*5*/ + MTK_PULL_PUPD_R1R0_TYPE,/*6*/ MTK_PULL_PUPD_R1R0_TYPE,/*7*/ + MTK_PULL_PUPD_R1R0_TYPE,/*8*/ MTK_PULL_PUPD_R1R0_TYPE,/*9*/ + MTK_PULL_PUPD_R1R0_TYPE,/*10*/ MTK_PULL_PUPD_R1R0_TYPE,/*11*/ + MTK_PULL_PUPD_R1R0_TYPE,/*12*/ MTK_PULL_PUPD_R1R0_TYPE,/*13*/ + MTK_PULL_PUPD_R1R0_TYPE,/*14*/ MTK_PULL_PUPD_R1R0_TYPE,/*15*/ + MTK_PULL_PUPD_R1R0_TYPE,/*16*/ MTK_PULL_PUPD_R1R0_TYPE,/*17*/ + MTK_PULL_PUPD_R1R0_TYPE,/*18*/ MTK_PULL_PUPD_R1R0_TYPE,/*19*/ + MTK_PULL_PUPD_R1R0_TYPE,/*20*/ MTK_PULL_PUPD_R1R0_TYPE,/*21*/ + MTK_PULL_PUPD_R1R0_TYPE,/*22*/ MTK_PULL_PUPD_R1R0_TYPE,/*23*/ + MTK_PULL_PUPD_R1R0_TYPE,/*24*/ MTK_PULL_PUPD_R1R0_TYPE,/*25*/ + MTK_PULL_PUPD_R1R0_TYPE,/*26*/ MTK_PULL_PUPD_R1R0_TYPE,/*27*/ + MTK_PULL_PUPD_R1R0_TYPE,/*28*/ MTK_PULL_PUPD_R1R0_TYPE,/*29*/ + MTK_PULL_PUPD_R1R0_TYPE,/*30*/ MTK_PULL_PUPD_R1R0_TYPE,/*31*/ + MTK_PULL_PUPD_R1R0_TYPE,/*32*/ MTK_PULL_PUPD_R1R0_TYPE,/*33*/ + MTK_PULL_PUPD_R1R0_TYPE,/*34*/ MTK_PULL_PUPD_R1R0_TYPE,/*35*/ + MTK_PULL_PUPD_R1R0_TYPE,/*36*/ MTK_PULL_PUPD_R1R0_TYPE,/*37*/ + MTK_PULL_PUPD_R1R0_TYPE,/*38*/ MTK_PULL_PUPD_R1R0_TYPE,/*39*/ + MTK_PULL_PUPD_R1R0_TYPE,/*40*/ MTK_PULL_PUPD_R1R0_TYPE,/*41*/ + MTK_PULL_PUPD_R1R0_TYPE,/*42*/ MTK_PULL_PUPD_R1R0_TYPE,/*43*/ + MTK_PULL_PUPD_R1R0_TYPE,/*44*/ MTK_PULL_PUPD_R1R0_TYPE,/*45*/ + MTK_PULL_PUPD_R1R0_TYPE,/*46*/ MTK_PULL_PUPD_R1R0_TYPE,/*47*/ + MTK_PULL_PUPD_R1R0_TYPE,/*48*/ MTK_PULL_PUPD_R1R0_TYPE,/*49*/ + MTK_PULL_PUPD_R1R0_TYPE,/*50*/ MTK_PULL_PUPD_R1R0_TYPE,/*51*/ + MTK_PULL_PUPD_R1R0_TYPE,/*52*/ MTK_PULL_PUPD_R1R0_TYPE,/*53*/ + MTK_PULL_PUPD_R1R0_TYPE,/*54*/ MTK_PULL_PUPD_R1R0_TYPE,/*55*/ + MTK_PULL_PUPD_R1R0_TYPE,/*56*/ MTK_PULL_PUPD_R1R0_TYPE,/*57*/ + MTK_PULL_PUPD_R1R0_TYPE,/*58*/ MTK_PULL_PUPD_R1R0_TYPE,/*59*/ + MTK_PULL_PUPD_R1R0_TYPE,/*60*/ MTK_PULL_PUPD_R1R0_TYPE,/*61*/ + MTK_PULL_PUPD_R1R0_TYPE,/*62*/ MTK_PULL_PUPD_R1R0_TYPE,/*63*/ + MTK_PULL_PUPD_R1R0_TYPE,/*64*/ MTK_PULL_PUPD_R1R0_TYPE,/*65*/ + MTK_PULL_PUPD_R1R0_TYPE,/*66*/ MTK_PULL_PUPD_R1R0_TYPE,/*67*/ + MTK_PULL_PUPD_R1R0_TYPE,/*68*/ MTK_PULL_PU_PD_TYPE,/*69*/ + MTK_PULL_PU_PD_TYPE,/*70*/ MTK_PULL_PU_PD_TYPE,/*71*/ + MTK_PULL_PU_PD_TYPE,/*72*/ MTK_PULL_PU_PD_TYPE,/*73*/ + MTK_PULL_PU_PD_TYPE,/*74*/ MTK_PULL_PU_PD_TYPE,/*75*/ + MTK_PULL_PU_PD_TYPE,/*76*/ MTK_PULL_PU_PD_TYPE,/*77*/ + MTK_PULL_PU_PD_TYPE,/*78*/ MTK_PULL_PU_PD_TYPE,/*79*/ + MTK_PULL_PU_PD_TYPE,/*80*/ MTK_PULL_PU_PD_TYPE,/*81*/ + MTK_PULL_PU_PD_TYPE,/*82*/ MTK_PULL_PU_PD_TYPE,/*83*/ + MTK_PULL_PU_PD_TYPE,/*84*/ MTK_PULL_PU_PD_TYPE,/*85*/ + MTK_PULL_PU_PD_TYPE,/*86*/ MTK_PULL_PU_PD_TYPE,/*87*/ + MTK_PULL_PU_PD_TYPE,/*88*/ MTK_PULL_PU_PD_TYPE,/*89*/ + MTK_PULL_PU_PD_TYPE,/*90*/ MTK_PULL_PU_PD_TYPE,/*91*/ + MTK_PULL_PU_PD_TYPE,/*92*/ MTK_PULL_PU_PD_TYPE,/*93*/ + MTK_PULL_PU_PD_TYPE,/*94*/ MTK_PULL_PU_PD_TYPE,/*95*/ + MTK_PULL_PU_PD_TYPE,/*96*/ MTK_PULL_PU_PD_TYPE,/*97*/ + MTK_PULL_PU_PD_TYPE,/*98*/ MTK_PULL_PU_PD_TYPE,/*99*/ + MTK_PULL_PU_PD_TYPE,/*100*/ +}; + static const struct mtk_pin_reg_calc mt7986_reg_cals[] = { [PINCTRL_PIN_REG_MODE] = MTK_RANGE(mt7986_pin_mode_range), [PINCTRL_PIN_REG_DIR] = MTK_RANGE(mt7986_pin_dir_range), @@ -675,11 +729,17 @@ static int mt7986_uart1_1_funcs[] = { 4, 4, 4, 4, }; static int mt7986_spi1_2_pins[] = { 29, 30, 31, 32, }; static int mt7986_spi1_2_funcs[] = { 1, 1, 1, 1, }; -static int mt7986_uart1_2_pins[] = { 29, 30, 31, 32, }; -static int mt7986_uart1_2_funcs[] = { 3, 3, 3, 3, }; +static int mt7986_uart1_2_rx_tx_pins[] = { 29, 30, }; +static int mt7986_uart1_2_rx_tx_funcs[] = { 3, 3, }; + +static int mt7986_uart1_2_cts_rts_pins[] = { 31, 32, }; +static int mt7986_uart1_2_cts_rts_funcs[] = { 3, 3, }; -static int mt7986_uart2_0_pins[] = { 29, 30, 31, 32, }; -static int mt7986_uart2_0_funcs[] = { 4, 4, 4, 4, }; +static int mt7986_uart2_0_rx_tx_pins[] = { 29, 30, }; +static int mt7986_uart2_0_rx_tx_funcs[] = { 4, 4, }; + +static int mt7986_uart2_0_cts_rts_pins[] = { 31, 32, }; +static int mt7986_uart2_0_cts_rts_funcs[] = { 4, 4, }; static int mt7986_spi0_pins[] = { 33, 34, 35, 36, }; static int mt7986_spi0_funcs[] = { 1, 1, 1, 1, }; @@ -708,6 +768,12 @@ static int mt7986_pcie_reset_funcs[] = { 1, }; static int mt7986_uart1_pins[] = { 42, 43, 44, 45, }; static int mt7986_uart1_funcs[] = { 1, 1, 1, 1, }; +static int mt7986_uart1_rx_tx_pins[] = { 42, 43, }; +static int mt7986_uart1_rx_tx_funcs[] = { 1, 1, }; + +static int mt7986_uart1_cts_rts_pins[] = { 44, 45, }; +static int mt7986_uart1_cts_rts_funcs[] = { 1, 1, }; + static int mt7986_uart2_pins[] = { 46, 47, 48, 49, }; static int mt7986_uart2_funcs[] = { 1, 1, 1, 1, }; @@ -749,6 +815,8 @@ static const struct group_desc mt7986_groups[] = { PINCTRL_PIN_GROUP("wifi_led", mt7986_wifi_led), PINCTRL_PIN_GROUP("i2c", mt7986_i2c), PINCTRL_PIN_GROUP("uart1_0", mt7986_uart1_0), + PINCTRL_PIN_GROUP("uart1_rx_tx", mt7986_uart1_rx_tx), + PINCTRL_PIN_GROUP("uart1_cts_rts", mt7986_uart1_cts_rts), PINCTRL_PIN_GROUP("pcie_clk", mt7986_pcie_clk), PINCTRL_PIN_GROUP("pcie_wake", mt7986_pcie_wake), PINCTRL_PIN_GROUP("spi1_0", mt7986_spi1_0), @@ -760,8 +828,10 @@ static const struct group_desc mt7986_groups[] = { PINCTRL_PIN_GROUP("spi1_1", mt7986_spi1_1), PINCTRL_PIN_GROUP("uart1_1", mt7986_uart1_1), PINCTRL_PIN_GROUP("spi1_2", mt7986_spi1_2), - PINCTRL_PIN_GROUP("uart1_2", mt7986_uart1_2), - PINCTRL_PIN_GROUP("uart2_0", mt7986_uart2_0), + PINCTRL_PIN_GROUP("uart1_2_rx_tx", mt7986_uart1_2_rx_tx), + PINCTRL_PIN_GROUP("uart1_2_cts_rts", mt7986_uart1_2_cts_rts), + PINCTRL_PIN_GROUP("uart2_0_rx_tx", mt7986_uart2_0_rx_tx), + PINCTRL_PIN_GROUP("uart2_0_cts_rts", mt7986_uart2_0_cts_rts), PINCTRL_PIN_GROUP("spi0", mt7986_spi0), PINCTRL_PIN_GROUP("spi0_wp_hold", mt7986_spi0_wp_hold), PINCTRL_PIN_GROUP("uart2_1", mt7986_uart2_1), @@ -800,7 +870,9 @@ static const char *mt7986_pwm_groups[] = { "pwm0", "pwm1_0", "pwm1_1", }; static const char *mt7986_spi_groups[] = { "spi0", "spi0_wp_hold", "spi1_0", "spi1_1", "spi1_2", "spi1_3", }; static const char *mt7986_uart_groups[] = { - "uart1_0", "uart1_1", "uart1_2", "uart1_3_rx_tx", "uart1_3_cts_rts", + "uart1_0", "uart1_1", "uart1_rx_tx", "uart1_cts_rts", + "uart1_2_rx_tx", "uart1_2_cts_rts", + "uart1_3_rx_tx", "uart1_3_cts_rts", "uart2_0_rx_tx", "uart2_0_cts_rts", "uart2_0", "uart2_1", "uart0", "uart1", "uart2", }; static const char *mt7986_wdt_groups[] = { "watchdog", }; @@ -850,6 +922,7 @@ static struct mtk_pin_soc mt7986a_data = { .ies_present = false, .base_names = mt7986_pinctrl_register_base_names, .nbase_names = ARRAY_SIZE(mt7986_pinctrl_register_base_names), + .pull_type = mt7986_pull_type, .bias_set_combo = mtk_pinconf_bias_set_combo, .bias_get_combo = mtk_pinconf_bias_get_combo, .drive_set = mtk_pinconf_drive_set_rev1, @@ -871,6 +944,7 @@ static struct mtk_pin_soc mt7986b_data = { .ies_present = false, .base_names = mt7986_pinctrl_register_base_names, .nbase_names = ARRAY_SIZE(mt7986_pinctrl_register_base_names), + .pull_type = mt7986_pull_type, .bias_set_combo = mtk_pinconf_bias_set_combo, .bias_get_combo = mtk_pinconf_bias_get_combo, .drive_set = mtk_pinconf_drive_set_rev1, diff --git a/drivers/pinctrl/mediatek/pinctrl-mt8365.c b/drivers/pinctrl/mediatek/pinctrl-mt8365.c index e31b89b226b7a4..db4492e9ee6737 100644 --- a/drivers/pinctrl/mediatek/pinctrl-mt8365.c +++ b/drivers/pinctrl/mediatek/pinctrl-mt8365.c @@ -416,6 +416,23 @@ static const struct mtk_pin_ies_smt_set mt8365_smt_set[] = { MTK_PIN_IES_SMT_SPEC(144, 144, 0x480, 22), }; +static int mt8365_set_clr_mode(struct regmap *regmap, + unsigned int bit, unsigned int reg_pullen, unsigned int reg_pullsel, + bool enable, bool isup) +{ + int ret; + + ret = regmap_update_bits(regmap, reg_pullen, BIT(bit), enable << bit); + if (ret) + return -EINVAL; + + ret = regmap_update_bits(regmap, reg_pullsel, BIT(bit), isup << bit); + if (ret) + return -EINVAL; + + return 0; +} + static const struct mtk_pinctrl_devdata mt8365_pinctrl_data = { .pins = mtk_pins_mt8365, .npins = ARRAY_SIZE(mtk_pins_mt8365), @@ -431,6 +448,7 @@ static const struct mtk_pinctrl_devdata mt8365_pinctrl_data = { .n_spec_pupd = ARRAY_SIZE(mt8365_spec_pupd), .spec_pull_set = mtk_pctrl_spec_pull_set_samereg, .spec_ies_smt_set = mtk_pconf_spec_set_ies_smt_range, + .mt8365_set_clr_mode = mt8365_set_clr_mode, .dir_offset = 0x0140, .dout_offset = 0x00A0, .din_offset = 0x0000, diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c index f25b3e09386bc1..553d16703475b8 100644 --- a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c +++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c @@ -330,6 +330,21 @@ static int mtk_pconf_set_pull_select(struct mtk_pinctrl *pctl, return -EINVAL; } + if (pctl->devdata->mt8365_set_clr_mode) { + bit = pin & pctl->devdata->mode_mask; + reg_pullen = mtk_get_port(pctl, pin) + + pctl->devdata->pullen_offset; + reg_pullsel = mtk_get_port(pctl, pin) + + pctl->devdata->pullsel_offset; + ret = pctl->devdata->mt8365_set_clr_mode(mtk_get_regmap(pctl, pin), + bit, reg_pullen, reg_pullsel, + enable, isup); + if (ret) + return -EINVAL; + + return 0; + } + bit = BIT(pin & pctl->devdata->mode_mask); if (enable) reg_pullen = SET_ADDR(mtk_get_port(pctl, pin) + @@ -1042,7 +1057,6 @@ int mtk_pctrl_init(struct platform_device *pdev, struct pinctrl_pin_desc *pins; struct mtk_pinctrl *pctl; struct device_node *np = pdev->dev.of_node, *node; - struct property *prop; int ret, i; pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL); @@ -1051,11 +1065,6 @@ int mtk_pctrl_init(struct platform_device *pdev, platform_set_drvdata(pdev, pctl); - prop = of_find_property(np, "pins-are-numbered", NULL); - if (!prop) - return dev_err_probe(dev, -EINVAL, - "only support pins-are-numbered format\n"); - node = of_parse_phandle(np, "mediatek,pctl-regmap", 0); if (node) { pctl->regmap1 = syscon_node_to_regmap(node); diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common.h b/drivers/pinctrl/mediatek/pinctrl-mtk-common.h index 6fe8564334c94b..11afa12a96cbc2 100644 --- a/drivers/pinctrl/mediatek/pinctrl-mtk-common.h +++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common.h @@ -216,7 +216,10 @@ struct mtk_eint_offsets { * @spec_dir_set: In very few SoCs, direction control registers are not * arranged continuously, they may be cut to parts. So they need special * dir setting. - + * @mt8365_set_clr_mode: In mt8365, some pins won't set correcty because they + * need to use the main R/W register to read/update/write the modes instead of + * the SET/CLR register. + * * @dir_offset: The direction register offset. * @pullen_offset: The pull-up/pull-down enable register offset. * @pinmux_offset: The pinmux register offset. @@ -252,6 +255,9 @@ struct mtk_pinctrl_devdata { void (*spec_pinmux_set)(struct regmap *reg, unsigned int pin, unsigned int mode); void (*spec_dir_set)(unsigned int *reg_addr, unsigned int pin); + int (*mt8365_set_clr_mode)(struct regmap *regmap, + unsigned int bit, unsigned int reg_pullen, unsigned int reg_pullsel, + bool enable, bool isup); unsigned int dir_offset; unsigned int ies_offset; unsigned int smt_offset; diff --git a/drivers/pinctrl/mediatek/pinctrl-paris.c b/drivers/pinctrl/mediatek/pinctrl-paris.c index 74517e81095850..475f4172d50852 100644 --- a/drivers/pinctrl/mediatek/pinctrl-paris.c +++ b/drivers/pinctrl/mediatek/pinctrl-paris.c @@ -11,7 +11,12 @@ #include <linux/gpio/driver.h> #include <linux/module.h> +#include <linux/seq_file.h> + +#include <linux/pinctrl/consumer.h> + #include <dt-bindings/pinctrl/mt65xx.h> + #include "pinctrl-paris.h" #define PINCTRL_PINCTRL_DEV KBUILD_MODNAME diff --git a/drivers/pinctrl/mvebu/pinctrl-mvebu.c b/drivers/pinctrl/mvebu/pinctrl-mvebu.c index 8ef0a97d2bf551..8e6aac4164df8b 100644 --- a/drivers/pinctrl/mvebu/pinctrl-mvebu.c +++ b/drivers/pinctrl/mvebu/pinctrl-mvebu.c @@ -6,20 +6,22 @@ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> */ -#include <linux/platform_device.h> -#include <linux/slab.h> +#include <linux/err.h> +#include <linux/gpio/driver.h> #include <linux/io.h> +#include <linux/mfd/syscon.h> #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_platform.h> -#include <linux/err.h> -#include <linux/gpio/driver.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/seq_file.h> +#include <linux/slab.h> + #include <linux/pinctrl/machine.h> #include <linux/pinctrl/pinconf.h> #include <linux/pinctrl/pinctrl.h> #include <linux/pinctrl/pinmux.h> -#include <linux/mfd/syscon.h> -#include <linux/regmap.h> #include "pinctrl-mvebu.h" diff --git a/drivers/pinctrl/nuvoton/pinctrl-npcm7xx.c b/drivers/pinctrl/nuvoton/pinctrl-npcm7xx.c index 1c4e89b046de19..ff5bcea172e84c 100644 --- a/drivers/pinctrl/nuvoton/pinctrl-npcm7xx.c +++ b/drivers/pinctrl/nuvoton/pinctrl-npcm7xx.c @@ -11,14 +11,17 @@ #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_irq.h> +#include <linux/platform_device.h> +#include <linux/property.h> +#include <linux/regmap.h> +#include <linux/seq_file.h> + +#include <linux/pinctrl/consumer.h> #include <linux/pinctrl/machine.h> -#include <linux/pinctrl/pinconf.h> #include <linux/pinctrl/pinconf-generic.h> +#include <linux/pinctrl/pinconf.h> #include <linux/pinctrl/pinctrl.h> #include <linux/pinctrl/pinmux.h> -#include <linux/platform_device.h> -#include <linux/property.h> -#include <linux/regmap.h> /* GCR registers */ #define NPCM7XX_GCR_PDID 0x00 diff --git a/drivers/pinctrl/nuvoton/pinctrl-wpcm450.c b/drivers/pinctrl/nuvoton/pinctrl-wpcm450.c index 8193b92da40311..2d1c1652cfd9d3 100644 --- a/drivers/pinctrl/nuvoton/pinctrl-wpcm450.c +++ b/drivers/pinctrl/nuvoton/pinctrl-wpcm450.c @@ -49,7 +49,6 @@ struct wpcm450_bank; struct wpcm450_gpio { struct gpio_chip gc; struct wpcm450_pinctrl *pctrl; - struct irq_chip irqc; const struct wpcm450_bank *bank; }; @@ -142,7 +141,8 @@ static void wpcm450_gpio_irq_ack(struct irq_data *d) static void wpcm450_gpio_irq_mask(struct irq_data *d) { - struct wpcm450_gpio *gpio = gpiochip_get_data(irq_data_get_irq_chip_data(d)); + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct wpcm450_gpio *gpio = gpiochip_get_data(gc); struct wpcm450_pinctrl *pctrl = gpio->pctrl; unsigned long flags; unsigned long even; @@ -157,11 +157,14 @@ static void wpcm450_gpio_irq_mask(struct irq_data *d) __assign_bit(bit, &even, 0); iowrite32(even, pctrl->gpio_base + WPCM450_GPEVEN); raw_spin_unlock_irqrestore(&pctrl->lock, flags); + + gpiochip_disable_irq(gc, irqd_to_hwirq(d)); } static void wpcm450_gpio_irq_unmask(struct irq_data *d) { - struct wpcm450_gpio *gpio = gpiochip_get_data(irq_data_get_irq_chip_data(d)); + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct wpcm450_gpio *gpio = gpiochip_get_data(gc); struct wpcm450_pinctrl *pctrl = gpio->pctrl; unsigned long flags; unsigned long even; @@ -171,6 +174,8 @@ static void wpcm450_gpio_irq_unmask(struct irq_data *d) if (bit < 0) return; + gpiochip_enable_irq(gc, irqd_to_hwirq(d)); + raw_spin_lock_irqsave(&pctrl->lock, flags); even = ioread32(pctrl->gpio_base + WPCM450_GPEVEN); __assign_bit(bit, &even, 1); @@ -293,6 +298,8 @@ static const struct irq_chip wpcm450_gpio_irqchip = { .irq_unmask = wpcm450_gpio_irq_unmask, .irq_mask = wpcm450_gpio_irq_mask, .irq_set_type = wpcm450_gpio_set_irq_type, + .flags = IRQCHIP_IMMUTABLE, + GPIOCHIP_IRQ_RESOURCE_HELPERS, }; static void wpcm450_gpio_irqhandler(struct irq_desc *desc) @@ -621,6 +628,9 @@ struct wpcm450_pincfg { int fn1, reg1, bit1; }; +/* Add this value to bit0 or bit1 to indicate that the MFSEL bit is inverted */ +#define INV BIT(5) + static const struct wpcm450_pincfg pincfg[] = { /* PIN FUNCTION 1 FUNCTION 2 */ WPCM450_PINCFG(0, none, NONE, 0, none, NONE, 0), @@ -658,7 +668,7 @@ static const struct wpcm450_pincfg pincfg[] = { WPCM450_PINCFG(32, scs1, MFSEL1, 3, none, NONE, 0), WPCM450_PINCFG(33, scs2, MFSEL1, 4, none, NONE, 0), - WPCM450_PINCFG(34, scs3, MFSEL1, 5, none, NONE, 0), + WPCM450_PINCFG(34, scs3, MFSEL1, 5 | INV, none, NONE, 0), WPCM450_PINCFG(35, xcs1, MFSEL1, 29, none, NONE, 0), WPCM450_PINCFG(36, xcs2, MFSEL1, 28, none, NONE, 0), WPCM450_PINCFG(37, none, NONE, 0, none, NONE, 0), /* DVO */ @@ -718,8 +728,8 @@ static const struct wpcm450_pincfg pincfg[] = { WPCM450_PINCFG(90, r2err, MFSEL1, 15, none, NONE, 0), WPCM450_PINCFG(91, r2md, MFSEL1, 16, none, NONE, 0), WPCM450_PINCFG(92, r2md, MFSEL1, 16, none, NONE, 0), - WPCM450_PINCFG(93, kbcc, MFSEL1, 17, none, NONE, 0), - WPCM450_PINCFG(94, kbcc, MFSEL1, 17, none, NONE, 0), + WPCM450_PINCFG(93, kbcc, MFSEL1, 17 | INV, none, NONE, 0), + WPCM450_PINCFG(94, kbcc, MFSEL1, 17 | INV, none, NONE, 0), WPCM450_PINCFG(95, none, NONE, 0, none, NONE, 0), WPCM450_PINCFG(96, none, NONE, 0, none, NONE, 0), @@ -793,6 +803,19 @@ static const struct pinctrl_pin_desc wpcm450_pins[] = { WPCM450_PIN(124), WPCM450_PIN(125), WPCM450_PIN(126), WPCM450_PIN(127), }; +/* Helper function to update MFSEL field according to the selected function */ +static void wpcm450_update_mfsel(struct regmap *gcr_regmap, int reg, int bit, int fn, int fn_selected) +{ + bool value = (fn == fn_selected); + + if (bit & INV) { + value = !value; + bit &= ~INV; + } + + regmap_update_bits(gcr_regmap, reg, BIT(bit), value ? BIT(bit) : 0); +} + /* Enable mode in pin group */ static void wpcm450_setfunc(struct regmap *gcr_regmap, const unsigned int *pin, int npins, int func) @@ -804,13 +827,11 @@ static void wpcm450_setfunc(struct regmap *gcr_regmap, const unsigned int *pin, cfg = &pincfg[pin[i]]; if (func == fn_gpio || cfg->fn0 == func || cfg->fn1 == func) { if (cfg->reg0) - regmap_update_bits(gcr_regmap, cfg->reg0, - BIT(cfg->bit0), - (cfg->fn0 == func) ? BIT(cfg->bit0) : 0); + wpcm450_update_mfsel(gcr_regmap, cfg->reg0, + cfg->bit0, cfg->fn0, func); if (cfg->reg1) - regmap_update_bits(gcr_regmap, cfg->reg1, - BIT(cfg->bit1), - (cfg->fn1 == func) ? BIT(cfg->bit1) : 0); + wpcm450_update_mfsel(gcr_regmap, cfg->reg1, + cfg->bit1, cfg->fn1, func); } } } @@ -1068,9 +1089,8 @@ static int wpcm450_gpio_register(struct platform_device *pdev, gpio->gc.fwnode = child; gpio->gc.add_pin_ranges = wpcm450_gpio_add_pin_ranges; - gpio->irqc = wpcm450_gpio_irqchip; girq = &gpio->gc.irq; - girq->chip = &gpio->irqc; + gpio_irq_chip_set_chip(girq, &wpcm450_gpio_irqchip); girq->parent_handler = wpcm450_gpio_irqhandler; girq->parents = devm_kcalloc(dev, WPCM450_NUM_GPIO_IRQS, sizeof(*girq->parents), GFP_KERNEL); diff --git a/drivers/pinctrl/pinconf-generic.c b/drivers/pinctrl/pinconf-generic.c index 415d1df8f46a5c..365c4b0ca46548 100644 --- a/drivers/pinctrl/pinconf-generic.c +++ b/drivers/pinctrl/pinconf-generic.c @@ -395,8 +395,10 @@ int pinconf_generic_dt_node_to_map(struct pinctrl_dev *pctldev, for_each_available_child_of_node(np_config, np) { ret = pinconf_generic_dt_subnode_to_map(pctldev, np, map, &reserved_maps, num_maps, type); - if (ret < 0) + if (ret < 0) { + of_node_put(np); goto exit; + } } return 0; diff --git a/drivers/pinctrl/pinconf.h b/drivers/pinctrl/pinconf.h index be7311373299f7..694bfc9961faf1 100644 --- a/drivers/pinctrl/pinconf.h +++ b/drivers/pinctrl/pinconf.h @@ -10,6 +10,16 @@ * Author: Linus Walleij <linus.walleij@linaro.org> */ +#include <linux/errno.h> + +struct dentry; +struct device_node; +struct seq_file; + +struct pinctrl_dev; +struct pinctrl_map; +struct pinctrl_setting; + #ifdef CONFIG_PINCONF int pinconf_check_ops(struct pinctrl_dev *pctldev); diff --git a/drivers/pinctrl/pinctrl-amd.c b/drivers/pinctrl/pinctrl-amd.c index 6be89687171822..9bc6e3922e78e8 100644 --- a/drivers/pinctrl/pinctrl-amd.c +++ b/drivers/pinctrl/pinctrl-amd.c @@ -628,13 +628,15 @@ static bool do_amd_gpio_irq_handler(int irq, void *dev_id) /* Each status bit covers four pins */ for (i = 0; i < 4; i++) { regval = readl(regs + i); - /* caused wake on resume context for shared IRQ */ - if (irq < 0 && (regval & BIT(WAKE_STS_OFF))) { + + if (regval & PIN_IRQ_PENDING) dev_dbg(&gpio_dev->pdev->dev, - "Waking due to GPIO %d: 0x%x", + "GPIO %d is active: 0x%x", irqnr + i, regval); + + /* caused wake on resume context for shared IRQ */ + if (irq < 0 && (regval & BIT(WAKE_STS_OFF))) return true; - } if (!(regval & PIN_IRQ_PENDING) || !(regval & BIT(INTERRUPT_MASK_OFF))) diff --git a/drivers/pinctrl/pinctrl-apple-gpio.c b/drivers/pinctrl/pinctrl-apple-gpio.c index 2490384ef1b85d..3751c7de37aa9f 100644 --- a/drivers/pinctrl/pinctrl-apple-gpio.c +++ b/drivers/pinctrl/pinctrl-apple-gpio.c @@ -11,6 +11,8 @@ */ #include <dt-bindings/pinctrl/apple.h> + +#include <linux/bitfield.h> #include <linux/bits.h> #include <linux/gpio/driver.h> #include <linux/interrupt.h> @@ -18,11 +20,12 @@ #include <linux/module.h> #include <linux/of.h> #include <linux/of_irq.h> -#include <linux/pinctrl/pinctrl.h> -#include <linux/pinctrl/pinmux.h> #include <linux/platform_device.h> #include <linux/regmap.h> +#include <linux/pinctrl/pinctrl.h> +#include <linux/pinctrl/pinmux.h> + #include "pinctrl-utils.h" #include "core.h" #include "pinmux.h" diff --git a/drivers/pinctrl/pinctrl-at91-pio4.c b/drivers/pinctrl/pinctrl-at91-pio4.c index 82b921fd630d52..39b233f73e1327 100644 --- a/drivers/pinctrl/pinctrl-at91-pio4.c +++ b/drivers/pinctrl/pinctrl-at91-pio4.c @@ -7,18 +7,22 @@ */ #include <dt-bindings/pinctrl/at91.h> + #include <linux/clk.h> #include <linux/gpio/driver.h> +#include <linux/init.h> #include <linux/interrupt.h> #include <linux/io.h> -#include <linux/init.h> #include <linux/of.h> #include <linux/platform_device.h> -#include <linux/pinctrl/pinconf.h> +#include <linux/seq_file.h> +#include <linux/slab.h> + #include <linux/pinctrl/pinconf-generic.h> +#include <linux/pinctrl/pinconf.h> #include <linux/pinctrl/pinctrl.h> #include <linux/pinctrl/pinmux.h> -#include <linux/slab.h> + #include "core.h" #include "pinconf.h" #include "pinctrl-utils.h" @@ -775,6 +779,8 @@ static int atmel_conf_pin_config_group_get(struct pinctrl_dev *pctldev, return -EINVAL; arg = (res & ATMEL_PIO_DRVSTR_MASK) >> ATMEL_PIO_DRVSTR_OFFSET; break; + case PIN_CONFIG_PERSIST_STATE: + return -ENOTSUPP; default: return -ENOTSUPP; } @@ -883,6 +889,8 @@ static int atmel_conf_pin_config_group_set(struct pinctrl_dev *pctldev, dev_warn(pctldev->dev, "drive strength not updated (incorrect value)\n"); } break; + case PIN_CONFIG_PERSIST_STATE: + return -ENOTSUPP; default: dev_warn(pctldev->dev, "unsupported configuration parameter: %u\n", @@ -897,6 +905,25 @@ static int atmel_conf_pin_config_group_set(struct pinctrl_dev *pctldev, return 0; } +static int atmel_conf_pin_config_set(struct pinctrl_dev *pctldev, + unsigned pin, + unsigned long *configs, + unsigned num_configs) +{ + struct atmel_group *grp = atmel_pctl_find_group_by_pin(pctldev, pin); + + return atmel_conf_pin_config_group_set(pctldev, grp->pin, configs, num_configs); +} + +static int atmel_conf_pin_config_get(struct pinctrl_dev *pctldev, + unsigned pin, + unsigned long *configs) +{ + struct atmel_group *grp = atmel_pctl_find_group_by_pin(pctldev, pin); + + return atmel_conf_pin_config_group_get(pctldev, grp->pin, configs); +} + static void atmel_conf_pin_config_dbg_show(struct pinctrl_dev *pctldev, struct seq_file *s, unsigned int pin_id) @@ -944,6 +971,8 @@ static const struct pinconf_ops atmel_confops = { .pin_config_group_get = atmel_conf_pin_config_group_get, .pin_config_group_set = atmel_conf_pin_config_group_set, .pin_config_dbg_show = atmel_conf_pin_config_dbg_show, + .pin_config_set = atmel_conf_pin_config_set, + .pin_config_get = atmel_conf_pin_config_get, }; static struct pinctrl_desc atmel_pinctrl_desc = { @@ -1134,6 +1163,7 @@ static int atmel_pinctrl_probe(struct platform_device *pdev) atmel_pioctrl->gpio_chip->label = dev_name(dev); atmel_pioctrl->gpio_chip->parent = dev; atmel_pioctrl->gpio_chip->names = atmel_pioctrl->group_names; + atmel_pioctrl->gpio_chip->set_config = gpiochip_generic_config; atmel_pioctrl->pm_wakeup_sources = devm_kcalloc(dev, atmel_pioctrl->nbanks, diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c index 81dbffab621fb7..1e1813d7c55089 100644 --- a/drivers/pinctrl/pinctrl-at91.c +++ b/drivers/pinctrl/pinctrl-at91.c @@ -7,22 +7,24 @@ #include <linux/clk.h> #include <linux/err.h> +#include <linux/gpio/driver.h> #include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/io.h> #include <linux/of.h> -#include <linux/of_device.h> #include <linux/of_address.h> +#include <linux/of_device.h> #include <linux/of_irq.h> +#include <linux/pm.h> +#include <linux/seq_file.h> #include <linux/slab.h> -#include <linux/interrupt.h> -#include <linux/io.h> -#include <linux/gpio/driver.h> + +/* Since we request GPIOs from ourself */ +#include <linux/pinctrl/consumer.h> #include <linux/pinctrl/machine.h> #include <linux/pinctrl/pinconf.h> #include <linux/pinctrl/pinctrl.h> #include <linux/pinctrl/pinmux.h> -/* Since we request GPIOs from ourself */ -#include <linux/pinctrl/consumer.h> -#include <linux/pm.h> #include "pinctrl-at91.h" #include "core.h" diff --git a/drivers/pinctrl/pinctrl-axp209.c b/drivers/pinctrl/pinctrl-axp209.c index 7ab20ac15391e8..0bc1b381a2b8ef 100644 --- a/drivers/pinctrl/pinctrl-axp209.c +++ b/drivers/pinctrl/pinctrl-axp209.c @@ -16,13 +16,15 @@ #include <linux/module.h> #include <linux/of.h> #include <linux/of_device.h> -#include <linux/pinctrl/pinconf-generic.h> -#include <linux/pinctrl/pinctrl.h> -#include <linux/pinctrl/pinmux.h> #include <linux/platform_device.h> #include <linux/regmap.h> #include <linux/slab.h> +#include <linux/pinctrl/consumer.h> +#include <linux/pinctrl/pinconf-generic.h> +#include <linux/pinctrl/pinctrl.h> +#include <linux/pinctrl/pinmux.h> + #define AXP20X_GPIO_FUNCTIONS 0x7 #define AXP20X_GPIO_FUNCTION_OUT_LOW 0 #define AXP20X_GPIO_FUNCTION_OUT_HIGH 1 diff --git a/drivers/pinctrl/pinctrl-bm1880.c b/drivers/pinctrl/pinctrl-bm1880.c index a8e267237435f6..b0000fe5b31dfb 100644 --- a/drivers/pinctrl/pinctrl-bm1880.c +++ b/drivers/pinctrl/pinctrl-bm1880.c @@ -9,10 +9,12 @@ #include <linux/io.h> #include <linux/of.h> #include <linux/platform_device.h> +#include <linux/slab.h> + +#include <linux/pinctrl/pinconf-generic.h> +#include <linux/pinctrl/pinconf.h> #include <linux/pinctrl/pinctrl.h> #include <linux/pinctrl/pinmux.h> -#include <linux/pinctrl/pinconf-generic.h> -#include <linux/slab.h> #include "core.h" #include "pinctrl-utils.h" diff --git a/drivers/pinctrl/pinctrl-cy8c95x0.c b/drivers/pinctrl/pinctrl-cy8c95x0.c index 68509a2301b8fa..564fbaabcdb806 100644 --- a/drivers/pinctrl/pinctrl-cy8c95x0.c +++ b/drivers/pinctrl/pinctrl-cy8c95x0.c @@ -20,10 +20,12 @@ #include <linux/property.h> #include <linux/regmap.h> #include <linux/regulator/consumer.h> +#include <linux/seq_file.h> -#include <linux/pinctrl/pinctrl.h> +#include <linux/pinctrl/consumer.h> #include <linux/pinctrl/pinconf.h> #include <linux/pinctrl/pinconf-generic.h> +#include <linux/pinctrl/pinctrl.h> #include <linux/pinctrl/pinmux.h> /* Fast access registers */ @@ -551,36 +553,7 @@ out: static int cy8c95x0_gpio_direction_input(struct gpio_chip *gc, unsigned int off) { - struct cy8c95x0_pinctrl *chip = gpiochip_get_data(gc); - u8 port = cypress_get_port(chip, off); - u8 bit = cypress_get_pin_mask(chip, off); - int ret; - - mutex_lock(&chip->i2c_lock); - ret = regmap_write(chip->regmap, CY8C95X0_PORTSEL, port); - if (ret) - goto out; - - ret = regmap_write_bits(chip->regmap, CY8C95X0_DIRECTION, bit, bit); - if (ret) - goto out; - - if (test_bit(off, chip->push_pull)) { - /* - * Disable driving the pin by forcing it to HighZ. Only setting the - * direction register isn't sufficient in Push-Pull mode. - */ - ret = regmap_write_bits(chip->regmap, CY8C95X0_DRV_HIZ, bit, bit); - if (ret) - goto out; - - __clear_bit(off, chip->push_pull); - } - -out: - mutex_unlock(&chip->i2c_lock); - - return ret; + return pinctrl_gpio_direction_input(gc->base + off); } static int cy8c95x0_gpio_direction_output(struct gpio_chip *gc, @@ -597,19 +570,7 @@ static int cy8c95x0_gpio_direction_output(struct gpio_chip *gc, if (ret) return ret; - mutex_lock(&chip->i2c_lock); - /* Select port... */ - ret = regmap_write(chip->regmap, CY8C95X0_PORTSEL, port); - if (ret) - goto out; - - /* ...then direction */ - ret = regmap_write_bits(chip->regmap, CY8C95X0_DIRECTION, bit, 0); - -out: - mutex_unlock(&chip->i2c_lock); - - return ret; + return pinctrl_gpio_direction_output(gc->base + off); } static int cy8c95x0_gpio_get_value(struct gpio_chip *gc, unsigned int off) @@ -850,6 +811,8 @@ static int cy8c95x0_setup_gpiochip(struct cy8c95x0_pinctrl *chip) { struct gpio_chip *gc = &chip->gpio_chip; + gc->request = gpiochip_generic_request; + gc->free = gpiochip_generic_free; gc->direction_input = cy8c95x0_gpio_direction_input; gc->direction_output = cy8c95x0_gpio_direction_output; gc->get = cy8c95x0_gpio_get_value; @@ -1124,9 +1087,7 @@ static int cy8c95x0_get_function_groups(struct pinctrl_dev *pctldev, unsigned in return 0; } -static int cy8c95x0_pinmux_cfg(struct cy8c95x0_pinctrl *chip, - unsigned int val, - unsigned long off) +static int cy8c95x0_set_mode(struct cy8c95x0_pinctrl *chip, unsigned int off, bool mode) { u8 port = cypress_get_port(chip, off); u8 bit = cypress_get_pin_mask(chip, off); @@ -1137,10 +1098,23 @@ static int cy8c95x0_pinmux_cfg(struct cy8c95x0_pinctrl *chip, if (ret < 0) return ret; - ret = regmap_write_bits(chip->regmap, CY8C95X0_PWMSEL, bit, val ? bit : 0); + return regmap_write_bits(chip->regmap, CY8C95X0_PWMSEL, bit, mode ? bit : 0); +} + +static int cy8c95x0_pinmux_mode(struct cy8c95x0_pinctrl *chip, + unsigned int selector, unsigned int group) +{ + u8 port = cypress_get_port(chip, group); + u8 bit = cypress_get_pin_mask(chip, group); + int ret; + + ret = cy8c95x0_set_mode(chip, group, selector); if (ret < 0) return ret; + if (selector == 0) + return 0; + /* Set direction to output & set output to 1 so that PWM can work */ ret = regmap_write_bits(chip->regmap, CY8C95X0_DIRECTION, bit, bit); if (ret < 0) @@ -1156,7 +1130,67 @@ static int cy8c95x0_set_mux(struct pinctrl_dev *pctldev, unsigned int selector, int ret; mutex_lock(&chip->i2c_lock); - ret = cy8c95x0_pinmux_cfg(chip, selector, group); + ret = cy8c95x0_pinmux_mode(chip, selector, group); + mutex_unlock(&chip->i2c_lock); + + return ret; +} + +static int cy8c95x0_gpio_request_enable(struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *range, + unsigned int pin) +{ + struct cy8c95x0_pinctrl *chip = pinctrl_dev_get_drvdata(pctldev); + int ret; + + mutex_lock(&chip->i2c_lock); + ret = cy8c95x0_set_mode(chip, pin, false); + mutex_unlock(&chip->i2c_lock); + + return ret; +} + +static int cy8c95x0_pinmux_direction(struct cy8c95x0_pinctrl *chip, + unsigned int pin, bool input) +{ + u8 port = cypress_get_port(chip, pin); + u8 bit = cypress_get_pin_mask(chip, pin); + int ret; + + /* Select port... */ + ret = regmap_write(chip->regmap, CY8C95X0_PORTSEL, port); + if (ret) + return ret; + + /* ...then direction */ + ret = regmap_write_bits(chip->regmap, CY8C95X0_DIRECTION, bit, input ? bit : 0); + if (ret) + return ret; + + /* + * Disable driving the pin by forcing it to HighZ. Only setting + * the direction register isn't sufficient in Push-Pull mode. + */ + if (input && test_bit(pin, chip->push_pull)) { + ret = regmap_write_bits(chip->regmap, CY8C95X0_DRV_HIZ, bit, bit); + if (ret) + return ret; + + __clear_bit(pin, chip->push_pull); + } + + return 0; +} + +static int cy8c95x0_gpio_set_direction(struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *range, + unsigned int pin, bool input) +{ + struct cy8c95x0_pinctrl *chip = pinctrl_dev_get_drvdata(pctldev); + int ret; + + mutex_lock(&chip->i2c_lock); + ret = cy8c95x0_pinmux_direction(chip, pin, input); mutex_unlock(&chip->i2c_lock); return ret; @@ -1167,6 +1201,8 @@ static const struct pinmux_ops cy8c95x0_pmxops = { .get_function_name = cy8c95x0_get_function_name, .get_function_groups = cy8c95x0_get_function_groups, .set_mux = cy8c95x0_set_mux, + .gpio_request_enable = cy8c95x0_gpio_request_enable, + .gpio_set_direction = cy8c95x0_gpio_set_direction, .strict = true, }; diff --git a/drivers/pinctrl/pinctrl-falcon.c b/drivers/pinctrl/pinctrl-falcon.c index 7521a924dffb0a..2eab14f86fa3f0 100644 --- a/drivers/pinctrl/pinctrl-falcon.c +++ b/drivers/pinctrl/pinctrl-falcon.c @@ -7,17 +7,18 @@ * Copyright (C) 2012 John Crispin <john@phrozen.org> */ +#include <linux/err.h> +#include <linux/export.h> #include <linux/gpio/driver.h> #include <linux/interrupt.h> -#include <linux/slab.h> -#include <linux/export.h> -#include <linux/err.h> #include <linux/module.h> #include <linux/of.h> -#include <linux/of_platform.h> #include <linux/of_address.h> #include <linux/of_gpio.h> +#include <linux/of_platform.h> #include <linux/platform_device.h> +#include <linux/seq_file.h> +#include <linux/slab.h> #include "pinctrl-lantiq.h" diff --git a/drivers/pinctrl/pinctrl-gemini.c b/drivers/pinctrl/pinctrl-gemini.c index 5870956a993aa8..631612539af73f 100644 --- a/drivers/pinctrl/pinctrl-gemini.c +++ b/drivers/pinctrl/pinctrl-gemini.c @@ -10,14 +10,16 @@ #include <linux/io.h> #include <linux/mfd/syscon.h> #include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/seq_file.h> +#include <linux/slab.h> + #include <linux/pinctrl/machine.h> +#include <linux/pinctrl/pinconf-generic.h> +#include <linux/pinctrl/pinconf.h> #include <linux/pinctrl/pinctrl.h> #include <linux/pinctrl/pinmux.h> -#include <linux/pinctrl/pinconf.h> -#include <linux/pinctrl/pinconf-generic.h> -#include <linux/platform_device.h> -#include <linux/slab.h> -#include <linux/regmap.h> #include "pinctrl-utils.h" diff --git a/drivers/pinctrl/pinctrl-ingenic.c b/drivers/pinctrl/pinctrl-ingenic.c index 9e46d83e5138c0..2f220a47b74978 100644 --- a/drivers/pinctrl/pinctrl-ingenic.c +++ b/drivers/pinctrl/pinctrl-ingenic.c @@ -14,16 +14,18 @@ #include <linux/kernel.h> #include <linux/mod_devicetable.h> #include <linux/of.h> -#include <linux/pinctrl/pinctrl.h> -#include <linux/pinctrl/pinmux.h> -#include <linux/pinctrl/pinconf.h> -#include <linux/pinctrl/pinconf-generic.h> #include <linux/platform_device.h> #include <linux/property.h> #include <linux/regmap.h> #include <linux/seq_file.h> #include <linux/slab.h> +#include <linux/pinctrl/consumer.h> +#include <linux/pinctrl/pinconf-generic.h> +#include <linux/pinctrl/pinconf.h> +#include <linux/pinctrl/pinctrl.h> +#include <linux/pinctrl/pinmux.h> + #include "core.h" #include "pinconf.h" #include "pinmux.h" diff --git a/drivers/pinctrl/pinctrl-k210.c b/drivers/pinctrl/pinctrl-k210.c index ecab6bf63dc6d3..97920fb517bc64 100644 --- a/drivers/pinctrl/pinctrl-k210.c +++ b/drivers/pinctrl/pinctrl-k210.c @@ -3,18 +3,20 @@ * Copyright (C) 2020 Sean Anderson <seanga2@gmail.com> * Copyright (c) 2020 Western Digital Corporation or its affiliates. */ -#include <linux/io.h> -#include <linux/of_device.h> +#include <linux/bitfield.h> #include <linux/clk.h> +#include <linux/io.h> #include <linux/mfd/syscon.h> +#include <linux/of_device.h> #include <linux/platform_device.h> -#include <linux/bitfield.h> #include <linux/regmap.h> +#include <linux/seq_file.h> #include <linux/slab.h> + +#include <linux/pinctrl/pinconf-generic.h> +#include <linux/pinctrl/pinconf.h> #include <linux/pinctrl/pinctrl.h> #include <linux/pinctrl/pinmux.h> -#include <linux/pinctrl/pinconf.h> -#include <linux/pinctrl/pinconf-generic.h> #include <dt-bindings/pinctrl/k210-fpioa.h> @@ -862,8 +864,10 @@ static int k210_pinctrl_dt_node_to_map(struct pinctrl_dev *pctldev, for_each_available_child_of_node(np_config, np) { ret = k210_pinctrl_dt_subnode_to_map(pctldev, np, map, &reserved_maps, num_maps); - if (ret < 0) + if (ret < 0) { + of_node_put(np); goto err; + } } return 0; diff --git a/drivers/pinctrl/pinctrl-lantiq.c b/drivers/pinctrl/pinctrl-lantiq.c index 626e02d7a1ba17..7145b8b0dfd43f 100644 --- a/drivers/pinctrl/pinctrl-lantiq.c +++ b/drivers/pinctrl/pinctrl-lantiq.c @@ -6,12 +6,13 @@ * Copyright (C) 2012 John Crispin <john@phrozen.org> */ -#include <linux/module.h> #include <linux/device.h> #include <linux/io.h> +#include <linux/module.h> +#include <linux/of.h> #include <linux/platform_device.h> +#include <linux/seq_file.h> #include <linux/slab.h> -#include <linux/of.h> #include "pinctrl-lantiq.h" diff --git a/drivers/pinctrl/pinctrl-lantiq.h b/drivers/pinctrl/pinctrl-lantiq.h index c1f80886d1a812..efb25fc34f1499 100644 --- a/drivers/pinctrl/pinctrl-lantiq.h +++ b/drivers/pinctrl/pinctrl-lantiq.h @@ -10,11 +10,12 @@ #define __PINCTRL_LANTIQ_H #include <linux/clkdev.h> -#include <linux/pinctrl/pinctrl.h> -#include <linux/pinctrl/pinconf.h> -#include <linux/pinctrl/pinmux.h> + #include <linux/pinctrl/consumer.h> #include <linux/pinctrl/machine.h> +#include <linux/pinctrl/pinconf.h> +#include <linux/pinctrl/pinctrl.h> +#include <linux/pinctrl/pinmux.h> #include "core.h" diff --git a/drivers/pinctrl/pinctrl-loongson2.c b/drivers/pinctrl/pinctrl-loongson2.c new file mode 100644 index 00000000000000..a72ffeca26fbf4 --- /dev/null +++ b/drivers/pinctrl/pinctrl-loongson2.c @@ -0,0 +1,311 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Author: zhanghongchen <zhanghongchen@loongson.cn> + * Yinbo Zhu <zhuyinbo@loongson.cn> + * Copyright (C) 2022-2023 Loongson Technology Corporation Limited + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/mod_devicetable.h> +#include <linux/pinctrl/pinmux.h> +#include <linux/pinctrl/pinconf-generic.h> +#include <linux/pinctrl/pinctrl.h> +#include <linux/bitops.h> +#include <linux/io.h> +#include <linux/seq_file.h> + +#include "core.h" +#include "pinctrl-utils.h" + +#define PMX_GROUP(name, offset, bitv) \ + { \ + .grp = PINCTRL_PINGROUP((#name), (name ## _pins), \ + ARRAY_SIZE((name ## _pins))), \ + .reg = offset, \ + .bit = bitv, \ + } + +#define SPECIFIC_GROUP(group) \ + static const char * const group##_groups[] = { \ + #group \ + } + +#define FUNCTION(fn) \ + { \ + .name = #fn, \ + .groups = fn ## _groups, \ + .num_groups = ARRAY_SIZE(fn ## _groups), \ + } + +struct loongson2_pinctrl { + struct device *dev; + struct pinctrl_dev *pcdev; + struct pinctrl_desc desc; + struct device_node *of_node; + spinlock_t lock; + void __iomem *reg_base; +}; + +struct loongson2_pmx_group { + struct pingroup grp; + unsigned int reg; + unsigned int bit; +}; + +struct loongson2_pmx_func { + const char *name; + const char * const *groups; + unsigned int num_groups; +}; + +#define LOONGSON2_PIN(x) PINCTRL_PIN(x, "gpio"#x) +static const struct pinctrl_pin_desc loongson2_pctrl_pins[] = { + LOONGSON2_PIN(0), LOONGSON2_PIN(1), LOONGSON2_PIN(2), LOONGSON2_PIN(3), + LOONGSON2_PIN(4), LOONGSON2_PIN(5), LOONGSON2_PIN(6), LOONGSON2_PIN(7), + LOONGSON2_PIN(8), LOONGSON2_PIN(9), LOONGSON2_PIN(10), LOONGSON2_PIN(11), + LOONGSON2_PIN(12), LOONGSON2_PIN(13), LOONGSON2_PIN(14), + LOONGSON2_PIN(16), LOONGSON2_PIN(17), LOONGSON2_PIN(18), LOONGSON2_PIN(19), + LOONGSON2_PIN(20), LOONGSON2_PIN(21), LOONGSON2_PIN(22), LOONGSON2_PIN(23), + LOONGSON2_PIN(24), LOONGSON2_PIN(25), LOONGSON2_PIN(26), LOONGSON2_PIN(27), + LOONGSON2_PIN(28), LOONGSON2_PIN(29), LOONGSON2_PIN(30), + LOONGSON2_PIN(32), LOONGSON2_PIN(33), LOONGSON2_PIN(34), LOONGSON2_PIN(35), + LOONGSON2_PIN(36), LOONGSON2_PIN(37), LOONGSON2_PIN(38), LOONGSON2_PIN(39), + LOONGSON2_PIN(40), LOONGSON2_PIN(41), + LOONGSON2_PIN(44), LOONGSON2_PIN(45), LOONGSON2_PIN(46), LOONGSON2_PIN(47), + LOONGSON2_PIN(48), LOONGSON2_PIN(49), LOONGSON2_PIN(50), LOONGSON2_PIN(51), + LOONGSON2_PIN(52), LOONGSON2_PIN(53), LOONGSON2_PIN(54), LOONGSON2_PIN(55), + LOONGSON2_PIN(56), LOONGSON2_PIN(57), LOONGSON2_PIN(58), LOONGSON2_PIN(59), + LOONGSON2_PIN(60), LOONGSON2_PIN(61), LOONGSON2_PIN(62), LOONGSON2_PIN(63), +}; + +static const unsigned int gpio_pins[] = {0, 1, 2, 3, 4, 5, 6, 7, + 8, 9, 10, 11, 12, 13, 14, + 16, 17, 18, 19, 20, 21, 22, 23, + 24, 25, 26, 27, 28, 29, 30, + 32, 33, 34, 35, 36, 37, 38, 39, + 40, 43, 44, 45, 46, 47, + 48, 49, 50, 51, 52, 53, 46, 55, + 56, 57, 58, 59, 60, 61, 62, 63}; +static const unsigned int sdio_pins[] = {36, 37, 38, 39, 40, 41}; +static const unsigned int can1_pins[] = {34, 35}; +static const unsigned int can0_pins[] = {32, 33}; +static const unsigned int pwm3_pins[] = {23}; +static const unsigned int pwm2_pins[] = {22}; +static const unsigned int pwm1_pins[] = {21}; +static const unsigned int pwm0_pins[] = {20}; +static const unsigned int i2c1_pins[] = {18, 19}; +static const unsigned int i2c0_pins[] = {16, 17}; +static const unsigned int nand_pins[] = {44, 45, 46, 47, 48, 49, 50, 51, + 52, 53, 54, 55, 56, 57, 58, 59, 60, + 61, 62, 63}; +static const unsigned int sata_led_pins[] = {14}; +static const unsigned int i2s_pins[] = {24, 25, 26, 27, 28}; +static const unsigned int hda_pins[] = {24, 25, 26, 27, 28, 29, 30}; + +static struct loongson2_pmx_group loongson2_pmx_groups[] = { + PMX_GROUP(gpio, 0x0, 64), + PMX_GROUP(sdio, 0x0, 20), + PMX_GROUP(can1, 0x0, 17), + PMX_GROUP(can0, 0x0, 16), + PMX_GROUP(pwm3, 0x0, 15), + PMX_GROUP(pwm2, 0x0, 14), + PMX_GROUP(pwm1, 0x0, 13), + PMX_GROUP(pwm0, 0x0, 12), + PMX_GROUP(i2c1, 0x0, 11), + PMX_GROUP(i2c0, 0x0, 10), + PMX_GROUP(nand, 0x0, 9), + PMX_GROUP(sata_led, 0x0, 8), + PMX_GROUP(i2s, 0x0, 6), + PMX_GROUP(hda, 0x0, 4), +}; + +SPECIFIC_GROUP(sdio); +SPECIFIC_GROUP(can1); +SPECIFIC_GROUP(can0); +SPECIFIC_GROUP(pwm3); +SPECIFIC_GROUP(pwm2); +SPECIFIC_GROUP(pwm1); +SPECIFIC_GROUP(pwm0); +SPECIFIC_GROUP(i2c1); +SPECIFIC_GROUP(i2c0); +SPECIFIC_GROUP(nand); +SPECIFIC_GROUP(sata_led); +SPECIFIC_GROUP(i2s); +SPECIFIC_GROUP(hda); + +static const char * const gpio_groups[] = { + "sdio", + "can1", "can0", + "pwm3", "pwm2", "pwm1", "pwm0", + "i2c1", "i2c0", + "nand", + "sata_led", + "i2s", + "hda", +}; + +static const struct loongson2_pmx_func loongson2_pmx_functions[] = { + FUNCTION(gpio), + FUNCTION(sdio), + FUNCTION(can1), + FUNCTION(can0), + FUNCTION(pwm3), + FUNCTION(pwm2), + FUNCTION(pwm1), + FUNCTION(pwm0), + FUNCTION(i2c1), + FUNCTION(i2c0), + FUNCTION(nand), + FUNCTION(sata_led), + FUNCTION(i2s), + FUNCTION(hda), +}; + +static int loongson2_get_groups_count(struct pinctrl_dev *pcdev) +{ + return ARRAY_SIZE(loongson2_pmx_groups); +} + +static const char *loongson2_get_group_name(struct pinctrl_dev *pcdev, + unsigned int selector) +{ + return loongson2_pmx_groups[selector].grp.name; +} + +static int loongson2_get_group_pins(struct pinctrl_dev *pcdev, unsigned int selector, + const unsigned int **pins, unsigned int *num_pins) +{ + *pins = loongson2_pmx_groups[selector].grp.pins; + *num_pins = loongson2_pmx_groups[selector].grp.npins; + + return 0; +} + +static void loongson2_pin_dbg_show(struct pinctrl_dev *pcdev, struct seq_file *s, + unsigned int offset) +{ + seq_printf(s, " %s", dev_name(pcdev->dev)); +} + +static const struct pinctrl_ops loongson2_pctrl_ops = { + .get_groups_count = loongson2_get_groups_count, + .get_group_name = loongson2_get_group_name, + .get_group_pins = loongson2_get_group_pins, + .dt_node_to_map = pinconf_generic_dt_node_to_map_all, + .dt_free_map = pinctrl_utils_free_map, + .pin_dbg_show = loongson2_pin_dbg_show, +}; + +static int loongson2_pmx_set_mux(struct pinctrl_dev *pcdev, unsigned int func_num, + unsigned int group_num) +{ + struct loongson2_pinctrl *pctrl = pinctrl_dev_get_drvdata(pcdev); + void __iomem *reg = pctrl->reg_base + + loongson2_pmx_groups[group_num].reg; + unsigned int mux_bit = loongson2_pmx_groups[group_num].bit; + unsigned int val; + unsigned long flags; + + spin_lock_irqsave(&pctrl->lock, flags); + val = readl(reg); + if (func_num == 0) + val &= ~BIT(mux_bit); + else + val |= BIT(mux_bit); + writel(val, reg); + spin_unlock_irqrestore(&pctrl->lock, flags); + + return 0; +} + +static int loongson2_pmx_get_funcs_count(struct pinctrl_dev *pcdev) +{ + return ARRAY_SIZE(loongson2_pmx_functions); +} + +static const char *loongson2_pmx_get_func_name(struct pinctrl_dev *pcdev, + unsigned int selector) +{ + return loongson2_pmx_functions[selector].name; +} + +static int loongson2_pmx_get_groups(struct pinctrl_dev *pcdev, + unsigned int selector, + const char * const **groups, + unsigned int * const num_groups) +{ + *groups = loongson2_pmx_functions[selector].groups; + *num_groups = loongson2_pmx_functions[selector].num_groups; + + return 0; +} + +static const struct pinmux_ops loongson2_pmx_ops = { + .set_mux = loongson2_pmx_set_mux, + .get_functions_count = loongson2_pmx_get_funcs_count, + .get_function_name = loongson2_pmx_get_func_name, + .get_function_groups = loongson2_pmx_get_groups, +}; + +static int loongson2_pinctrl_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct loongson2_pinctrl *pctrl; + + pctrl = devm_kzalloc(dev, sizeof(*pctrl), GFP_KERNEL); + if (!pctrl) + return -ENOMEM; + + pctrl->reg_base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(pctrl->reg_base)) + return PTR_ERR(pctrl->reg_base); + + spin_lock_init(&pctrl->lock); + + pctrl->dev = dev; + pctrl->desc.name = "pinctrl-loongson2"; + pctrl->desc.owner = THIS_MODULE; + pctrl->desc.pctlops = &loongson2_pctrl_ops; + pctrl->desc.pmxops = &loongson2_pmx_ops; + pctrl->desc.pins = loongson2_pctrl_pins; + pctrl->desc.npins = ARRAY_SIZE(loongson2_pctrl_pins); + + pctrl->pcdev = devm_pinctrl_register(pctrl->dev, &pctrl->desc, pctrl); + if (IS_ERR(pctrl->pcdev)) + return dev_err_probe(pctrl->dev, PTR_ERR(pctrl->pcdev), + "can't register pinctrl device"); + + return 0; +} + +static const struct of_device_id loongson2_pinctrl_dt_match[] = { + { + .compatible = "loongson,ls2k-pinctrl", + }, + { } +}; + +static struct platform_driver loongson2_pinctrl_driver = { + .probe = loongson2_pinctrl_probe, + .driver = { + .name = "loongson2-pinctrl", + .of_match_table = loongson2_pinctrl_dt_match, + }, +}; + +static int __init loongson2_pinctrl_init(void) +{ + return platform_driver_register(&loongson2_pinctrl_driver); +} +arch_initcall(loongson2_pinctrl_init); + +static void __exit loongson2_pinctrl_exit(void) +{ + platform_driver_unregister(&loongson2_pinctrl_driver); +} +module_exit(loongson2_pinctrl_exit); + +MODULE_DESCRIPTION("Loongson2 Pinctrl driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/pinctrl/pinctrl-lpc18xx.c b/drivers/pinctrl/pinctrl-lpc18xx.c index ed9bf2c8999804..13c041dd2ce03a 100644 --- a/drivers/pinctrl/pinctrl-lpc18xx.c +++ b/drivers/pinctrl/pinctrl-lpc18xx.c @@ -10,13 +10,15 @@ #include <linux/bitops.h> #include <linux/clk.h> -#include <linux/io.h> #include <linux/init.h> +#include <linux/io.h> #include <linux/of.h> #include <linux/of_device.h> + +#include <linux/pinctrl/pinconf-generic.h> +#include <linux/pinctrl/pinconf.h> #include <linux/pinctrl/pinctrl.h> #include <linux/pinctrl/pinmux.h> -#include <linux/pinctrl/pinconf-generic.h> #include "core.h" #include "pinctrl-utils.h" diff --git a/drivers/pinctrl/pinctrl-microchip-sgpio.c b/drivers/pinctrl/pinctrl-microchip-sgpio.c index af27b72c895868..4794602316e7db 100644 --- a/drivers/pinctrl/pinctrl-microchip-sgpio.c +++ b/drivers/pinctrl/pinctrl-microchip-sgpio.c @@ -15,13 +15,15 @@ #include <linux/mfd/ocelot.h> #include <linux/mod_devicetable.h> #include <linux/module.h> -#include <linux/pinctrl/pinmux.h> #include <linux/platform_device.h> #include <linux/property.h> #include <linux/regmap.h> #include <linux/reset.h> #include <linux/spinlock.h> +#include <linux/pinctrl/pinconf.h> +#include <linux/pinctrl/pinmux.h> + #include "core.h" #include "pinconf.h" diff --git a/drivers/pinctrl/pinctrl-ocelot.c b/drivers/pinctrl/pinctrl-ocelot.c index 687aaa60155557..29e4a6282a6414 100644 --- a/drivers/pinctrl/pinctrl-ocelot.c +++ b/drivers/pinctrl/pinctrl-ocelot.c @@ -14,15 +14,17 @@ #include <linux/of_device.h> #include <linux/of_irq.h> #include <linux/of_platform.h> -#include <linux/pinctrl/pinctrl.h> -#include <linux/pinctrl/pinmux.h> -#include <linux/pinctrl/pinconf.h> -#include <linux/pinctrl/pinconf-generic.h> #include <linux/platform_device.h> #include <linux/regmap.h> #include <linux/reset.h> #include <linux/slab.h> +#include <linux/pinctrl/consumer.h> +#include <linux/pinctrl/pinconf-generic.h> +#include <linux/pinctrl/pinconf.h> +#include <linux/pinctrl/pinctrl.h> +#include <linux/pinctrl/pinmux.h> + #include "core.h" #include "pinconf.h" #include "pinmux.h" @@ -2047,6 +2049,11 @@ static struct regmap *ocelot_pinctrl_create_pincfg(struct platform_device *pdev, return devm_regmap_init_mmio(&pdev->dev, base, ®map_config); } +static void ocelot_destroy_workqueue(void *data) +{ + destroy_workqueue(data); +} + static int ocelot_pinctrl_probe(struct platform_device *pdev) { const struct ocelot_match_data *data; @@ -2078,6 +2085,11 @@ static int ocelot_pinctrl_probe(struct platform_device *pdev) if (!info->wq) return -ENOMEM; + ret = devm_add_action_or_reset(dev, ocelot_destroy_workqueue, + info->wq); + if (ret) + return ret; + info->pincfg_data = &data->pincfg_data; reset = devm_reset_control_get_optional_shared(dev, "switch"); @@ -2119,15 +2131,6 @@ static int ocelot_pinctrl_probe(struct platform_device *pdev) return 0; } -static int ocelot_pinctrl_remove(struct platform_device *pdev) -{ - struct ocelot_pinctrl *info = platform_get_drvdata(pdev); - - destroy_workqueue(info->wq); - - return 0; -} - static struct platform_driver ocelot_pinctrl_driver = { .driver = { .name = "pinctrl-ocelot", @@ -2135,7 +2138,6 @@ static struct platform_driver ocelot_pinctrl_driver = { .suppress_bind_attrs = true, }, .probe = ocelot_pinctrl_probe, - .remove = ocelot_pinctrl_remove, }; module_platform_driver(ocelot_pinctrl_driver); diff --git a/drivers/pinctrl/pinctrl-single.c b/drivers/pinctrl/pinctrl-single.c index 414ee6bb8ac98e..99c3745da45620 100644 --- a/drivers/pinctrl/pinctrl-single.c +++ b/drivers/pinctrl/pinctrl-single.c @@ -16,17 +16,17 @@ #include <linux/err.h> #include <linux/list.h> #include <linux/interrupt.h> - #include <linux/irqchip/chained_irq.h> - #include <linux/of.h> #include <linux/of_device.h> #include <linux/of_address.h> #include <linux/of_irq.h> +#include <linux/seq_file.h> +#include <linux/pinctrl/pinconf-generic.h> +#include <linux/pinctrl/pinconf.h> #include <linux/pinctrl/pinctrl.h> #include <linux/pinctrl/pinmux.h> -#include <linux/pinctrl/pinconf-generic.h> #include <linux/platform_data/pinctrl-single.h> diff --git a/drivers/pinctrl/pinctrl-st.c b/drivers/pinctrl/pinctrl-st.c index cf7f9cbe604400..1409339f027933 100644 --- a/drivers/pinctrl/pinctrl-st.c +++ b/drivers/pinctrl/pinctrl-st.c @@ -5,21 +5,26 @@ * Srinivas Kandagatla <srinivas.kandagatla@st.com> */ -#include <linux/init.h> -#include <linux/module.h> -#include <linux/slab.h> #include <linux/err.h> +#include <linux/gpio/driver.h> +#include <linux/init.h> #include <linux/io.h> +#include <linux/mfd/syscon.h> +#include <linux/module.h> #include <linux/of.h> -#include <linux/of_irq.h> #include <linux/of_address.h> -#include <linux/gpio/driver.h> +#include <linux/of_irq.h> +#include <linux/platform_device.h> #include <linux/regmap.h> -#include <linux/mfd/syscon.h> +#include <linux/seq_file.h> +#include <linux/slab.h> +#include <linux/string_helpers.h> + +#include <linux/pinctrl/consumer.h> +#include <linux/pinctrl/pinconf.h> #include <linux/pinctrl/pinctrl.h> #include <linux/pinctrl/pinmux.h> -#include <linux/pinctrl/pinconf.h> -#include <linux/platform_device.h> + #include "core.h" /* PIO Block registers */ @@ -1175,7 +1180,7 @@ static int st_pctl_dt_calculate_pin(struct st_pinctrl *info, for (i = 0; i < info->nbanks; i++) { chip = &info->banks[i].gpio_chip; - if (chip->of_node == np) { + if (chip->fwnode == of_fwnode_handle(np)) { if (offset < chip->ngpio) retval = chip->base + offset; break; @@ -1518,7 +1523,7 @@ static int st_gpiolib_register_bank(struct st_pinctrl *info, bank->gpio_chip = st_gpio_template; bank->gpio_chip.base = bank_num * ST_GPIO_PINS_PER_BANK; bank->gpio_chip.ngpio = ST_GPIO_PINS_PER_BANK; - bank->gpio_chip.of_node = np; + bank->gpio_chip.fwnode = of_fwnode_handle(np); bank->gpio_chip.parent = dev; spin_lock_init(&bank->lock); diff --git a/drivers/pinctrl/pinctrl-stmfx.c b/drivers/pinctrl/pinctrl-stmfx.c index ab4dde40d3ed42..1181c4b506b11f 100644 --- a/drivers/pinctrl/pinctrl-stmfx.c +++ b/drivers/pinctrl/pinctrl-stmfx.c @@ -10,6 +10,8 @@ #include <linux/mfd/stmfx.h> #include <linux/module.h> #include <linux/platform_device.h> +#include <linux/seq_file.h> + #include <linux/pinctrl/pinconf.h> #include <linux/pinctrl/pinmux.h> diff --git a/drivers/pinctrl/pinctrl-thunderbay.c b/drivers/pinctrl/pinctrl-thunderbay.c index 9328b17485cf02..590bbbf619afcb 100644 --- a/drivers/pinctrl/pinctrl-thunderbay.c +++ b/drivers/pinctrl/pinctrl-thunderbay.c @@ -808,7 +808,7 @@ static int thunderbay_add_functions(struct thunderbay_pinctrl *tpc, struct funct funcs[i].num_group_names, funcs[i].data); } - kfree(funcs); + return 0; } @@ -817,6 +817,7 @@ static int thunderbay_build_functions(struct thunderbay_pinctrl *tpc) struct function_desc *thunderbay_funcs; void *ptr; int pin; + int ret; /* * Allocate maximum possible number of functions. Assume every pin @@ -860,7 +861,10 @@ static int thunderbay_build_functions(struct thunderbay_pinctrl *tpc) return -ENOMEM; thunderbay_funcs = ptr; - return thunderbay_add_functions(tpc, thunderbay_funcs); + ret = thunderbay_add_functions(tpc, thunderbay_funcs); + + kfree(thunderbay_funcs); + return ret; } static int thunderbay_pinconf_set_tristate(struct thunderbay_pinctrl *tpc, diff --git a/drivers/pinctrl/pinctrl-utils.h b/drivers/pinctrl/pinctrl-utils.h index cec407a8cc4e20..4108ee2dd6d02d 100644 --- a/drivers/pinctrl/pinctrl-utils.h +++ b/drivers/pinctrl/pinctrl-utils.h @@ -9,6 +9,11 @@ #ifndef __PINCTRL_UTILS_H__ #define __PINCTRL_UTILS_H__ +#include <linux/pinctrl/machine.h> + +struct pinctrl_dev; +struct pinctrl_map; + int pinctrl_utils_reserve_map(struct pinctrl_dev *pctldev, struct pinctrl_map **map, unsigned *reserved_maps, unsigned *num_maps, unsigned reserve); diff --git a/drivers/pinctrl/pinctrl-zynqmp.c b/drivers/pinctrl/pinctrl-zynqmp.c index c98f35ad892173..8d2cb0999f2ffd 100644 --- a/drivers/pinctrl/pinctrl-zynqmp.c +++ b/drivers/pinctrl/pinctrl-zynqmp.c @@ -14,10 +14,13 @@ #include <linux/module.h> #include <linux/of_address.h> #include <linux/platform_device.h> + #include <linux/firmware/xlnx-zynqmp.h> -#include <linux/pinctrl/pinmux.h> #include <linux/pinctrl/pinconf-generic.h> +#include <linux/pinctrl/pinconf.h> +#include <linux/pinctrl/pinctrl.h> +#include <linux/pinctrl/pinmux.h> #include "core.h" #include "pinctrl-utils.h" diff --git a/drivers/pinctrl/pinmux.c b/drivers/pinctrl/pinmux.c index f94d43b082d9c9..6bd7ac37a0e0ea 100644 --- a/drivers/pinctrl/pinmux.c +++ b/drivers/pinctrl/pinmux.c @@ -13,19 +13,22 @@ #define pr_fmt(fmt) "pinmux core: " fmt #include <linux/ctype.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> +#include <linux/debugfs.h> #include <linux/device.h> -#include <linux/slab.h> -#include <linux/radix-tree.h> #include <linux/err.h> +#include <linux/init.h> +#include <linux/kernel.h> #include <linux/list.h> -#include <linux/string.h> -#include <linux/debugfs.h> +#include <linux/module.h> +#include <linux/radix-tree.h> #include <linux/seq_file.h> +#include <linux/slab.h> +#include <linux/string.h> + #include <linux/pinctrl/machine.h> +#include <linux/pinctrl/pinctrl.h> #include <linux/pinctrl/pinmux.h> + #include "core.h" #include "pinmux.h" diff --git a/drivers/pinctrl/pinmux.h b/drivers/pinctrl/pinmux.h index 72fcf03eaa4380..ea6f99c24aa5e1 100644 --- a/drivers/pinctrl/pinmux.h +++ b/drivers/pinctrl/pinmux.h @@ -9,6 +9,17 @@ * * Author: Linus Walleij <linus.walleij@linaro.org> */ + +#include <linux/types.h> + +struct dentry; +struct seq_file; + +struct pinctrl_dev; +struct pinctrl_gpio_range; +struct pinctrl_map; +struct pinctrl_setting; + #ifdef CONFIG_PINMUX int pinmux_check_ops(struct pinctrl_dev *pctldev); diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig index 9dc2d803a58674..1378ddca084f8a 100644 --- a/drivers/pinctrl/qcom/Kconfig +++ b/drivers/pinctrl/qcom/Kconfig @@ -308,6 +308,16 @@ config PINCTRL_SDM660 Qualcomm Technologies Inc TLMM block found on the Qualcomm Technologies Inc SDM660 platform. +config PINCTRL_SDM670 + tristate "Qualcomm Technologies Inc SDM670 pin controller driver" + depends on OF + depends on ARM64 || COMPILE_TEST + depends on PINCTRL_MSM + help + This is the pinctrl, pinmux, pinconf and gpiolib driver for the + Qualcomm Technologies Inc TLMM block found on the Qualcomm + Technologies Inc SDM670 platform. + config PINCTRL_SDM845 tristate "Qualcomm Technologies Inc SDM845 pin controller driver" depends on (OF || ACPI) diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile index 8269a1db8794a4..a5c40f552e5c2f 100644 --- a/drivers/pinctrl/qcom/Makefile +++ b/drivers/pinctrl/qcom/Makefile @@ -33,6 +33,7 @@ obj-$(CONFIG_PINCTRL_SC7280_LPASS_LPI) += pinctrl-sc7280-lpass-lpi.o obj-$(CONFIG_PINCTRL_SC8180X) += pinctrl-sc8180x.o obj-$(CONFIG_PINCTRL_SC8280XP) += pinctrl-sc8280xp.o obj-$(CONFIG_PINCTRL_SDM660) += pinctrl-sdm660.o +obj-$(CONFIG_PINCTRL_SDM670) += pinctrl-sdm670.o obj-$(CONFIG_PINCTRL_SDM845) += pinctrl-sdm845.o obj-$(CONFIG_PINCTRL_SDX55) += pinctrl-sdx55.o obj-$(CONFIG_PINCTRL_SM6115) += pinctrl-sm6115.o diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c index e97ce45b6d538a..3dc670faa59ecf 100644 --- a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c +++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c @@ -4,14 +4,19 @@ * Copyright (c) 2020 Linaro Ltd. */ +#include <linux/bitfield.h> #include <linux/clk.h> #include <linux/gpio/driver.h> #include <linux/module.h> #include <linux/of_device.h> +#include <linux/seq_file.h> + #include <linux/pinctrl/pinconf-generic.h> #include <linux/pinctrl/pinconf.h> #include <linux/pinctrl/pinmux.h> + #include "../pinctrl-utils.h" + #include "pinctrl-lpass-lpi.h" #define MAX_LPI_NUM_CLKS 2 diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h index afbac2a6c82ca3..29047bb80bb818 100644 --- a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h +++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h @@ -6,10 +6,15 @@ #ifndef __PINCTRL_LPASS_LPI_H__ #define __PINCTRL_LPASS_LPI_H__ -#include <linux/bitops.h> -#include <linux/bitfield.h> +#include <linux/bits.h> +#include <linux/kernel.h> + #include "../core.h" +struct platform_device; + +struct pinctrl_pin_desc; + #define LPI_SLEW_RATE_CTL_REG 0xa000 #define LPI_TLMM_REG_OFFSET 0x1000 #define LPI_SLEW_RATE_MAX 0x03 diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c b/drivers/pinctrl/qcom/pinctrl-msm.c index 8bf8b21954fe49..47e9a8b0d4744f 100644 --- a/drivers/pinctrl/qcom/pinctrl-msm.c +++ b/drivers/pinctrl/qcom/pinctrl-msm.c @@ -6,31 +6,34 @@ #include <linux/delay.h> #include <linux/err.h> +#include <linux/gpio/driver.h> +#include <linux/interrupt.h> #include <linux/io.h> +#include <linux/log2.h> #include <linux/module.h> #include <linux/of.h> #include <linux/platform_device.h> +#include <linux/pm.h> +#include <linux/qcom_scm.h> +#include <linux/reboot.h> +#include <linux/seq_file.h> +#include <linux/slab.h> +#include <linux/spinlock.h> + #include <linux/pinctrl/machine.h> +#include <linux/pinctrl/pinconf-generic.h> +#include <linux/pinctrl/pinconf.h> #include <linux/pinctrl/pinctrl.h> #include <linux/pinctrl/pinmux.h> -#include <linux/pinctrl/pinconf.h> -#include <linux/pinctrl/pinconf-generic.h> -#include <linux/slab.h> -#include <linux/gpio/driver.h> -#include <linux/interrupt.h> -#include <linux/spinlock.h> -#include <linux/reboot.h> -#include <linux/pm.h> -#include <linux/log2.h> -#include <linux/qcom_scm.h> #include <linux/soc/qcom/irq.h> #include "../core.h" #include "../pinconf.h" -#include "pinctrl-msm.h" #include "../pinctrl-utils.h" +#include "pinctrl-msm.h" + #define MAX_NR_GPIO 300 #define MAX_NR_TILES 4 #define PS_HOLD_OFFSET 0x820 @@ -619,7 +622,6 @@ static void msm_gpio_set(struct gpio_chip *chip, unsigned offset, int value) } #ifdef CONFIG_DEBUG_FS -#include <linux/seq_file.h> static void msm_gpio_dbg_show_one(struct seq_file *s, struct pinctrl_dev *pctldev, @@ -708,9 +710,8 @@ static int msm_gpio_init_valid_mask(struct gpio_chip *gc, const int *reserved = pctrl->soc->reserved_gpios; u16 *tmp; - /* Driver provided reserved list overrides DT and ACPI */ + /* Remove driver-provided reserved GPIOs from valid_mask */ if (reserved) { - bitmap_fill(valid_mask, ngpios); for (i = 0; reserved[i] >= 0; i++) { if (i >= ngpios || reserved[i] >= ngpios) { dev_err(pctrl->dev, "invalid list of reserved GPIOs\n"); diff --git a/drivers/pinctrl/qcom/pinctrl-msm.h b/drivers/pinctrl/qcom/pinctrl-msm.h index dd0d949f7a9ecd..05a1209bf9ae08 100644 --- a/drivers/pinctrl/qcom/pinctrl-msm.h +++ b/drivers/pinctrl/qcom/pinctrl-msm.h @@ -5,6 +5,11 @@ #ifndef __PINCTRL_MSM_H__ #define __PINCTRL_MSM_H__ +#include <linux/pm.h> +#include <linux/types.h> + +struct platform_device; + struct pinctrl_pin_desc; /** diff --git a/drivers/pinctrl/qcom/pinctrl-sdm670.c b/drivers/pinctrl/qcom/pinctrl-sdm670.c new file mode 100644 index 00000000000000..b888bca7ecd7b9 --- /dev/null +++ b/drivers/pinctrl/qcom/pinctrl-sdm670.c @@ -0,0 +1,1345 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2017-2018, The Linux Foundation. All rights reserved. + * Copyright (c) 2022, Richard Acayan. All rights reserved. + */ + +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/pinctrl/pinctrl.h> + +#include "pinctrl-msm.h" + +#define FUNCTION(fname) \ + [msm_mux_##fname] = { \ + .name = #fname, \ + .groups = fname##_groups, \ + .ngroups = ARRAY_SIZE(fname##_groups), \ + } + +#define NORTH 0x00500000 +#define SOUTH 0x00900000 +#define WEST 0x00100000 + +#define REG_SIZE 0x1000 +#define PINGROUP(id, base, f1, f2, f3, f4, f5, f6, f7, f8, f9) \ + { \ + .name = "gpio" #id, \ + .pins = gpio##id##_pins, \ + .npins = ARRAY_SIZE(gpio##id##_pins), \ + .funcs = (int[]){ \ + msm_mux_gpio, /* gpio mode */ \ + msm_mux_##f1, \ + msm_mux_##f2, \ + msm_mux_##f3, \ + msm_mux_##f4, \ + msm_mux_##f5, \ + msm_mux_##f6, \ + msm_mux_##f7, \ + msm_mux_##f8, \ + msm_mux_##f9 \ + }, \ + .nfuncs = 10, \ + .ctl_reg = base + REG_SIZE * id, \ + .io_reg = base + 0x4 + REG_SIZE * id, \ + .intr_cfg_reg = base + 0x8 + REG_SIZE * id, \ + .intr_status_reg = base + 0xc + REG_SIZE * id, \ + .intr_target_reg = base + 0x8 + REG_SIZE * id, \ + .mux_bit = 2, \ + .pull_bit = 0, \ + .drv_bit = 6, \ + .oe_bit = 9, \ + .in_bit = 0, \ + .out_bit = 1, \ + .intr_enable_bit = 0, \ + .intr_status_bit = 0, \ + .intr_target_bit = 5, \ + .intr_target_kpss_val = 3, \ + .intr_raw_status_bit = 4, \ + .intr_polarity_bit = 1, \ + .intr_detection_bit = 2, \ + .intr_detection_width = 2, \ + } + +/* + * A dummy pingroup is a pin group that cannot be assigned a function and has + * no registers to control or monitor it. + */ +#define PINGROUP_DUMMY(id) \ + { \ + .name = "gpio" #id, \ + .pins = gpio##id##_pins, \ + .npins = ARRAY_SIZE(gpio##id##_pins), \ + .ctl_reg = 0, \ + .io_reg = 0, \ + .intr_cfg_reg = 0, \ + .intr_status_reg = 0, \ + .intr_target_reg = 0, \ + .mux_bit = -1, \ + .pull_bit = -1, \ + .drv_bit = -1, \ + .oe_bit = -1, \ + .in_bit = -1, \ + .out_bit = -1, \ + .intr_enable_bit = -1, \ + .intr_status_bit = -1, \ + .intr_target_bit = -1, \ + .intr_raw_status_bit = -1, \ + .intr_polarity_bit = -1, \ + .intr_detection_bit = -1, \ + .intr_detection_width = -1, \ + } + +#define SDC_QDSD_PINGROUP(pg_name, ctl, pull, drv) \ + { \ + .name = #pg_name, \ + .pins = pg_name##_pins, \ + .npins = ARRAY_SIZE(pg_name##_pins), \ + .ctl_reg = ctl, \ + .io_reg = 0, \ + .intr_cfg_reg = 0, \ + .intr_status_reg = 0, \ + .intr_target_reg = 0, \ + .mux_bit = -1, \ + .pull_bit = pull, \ + .drv_bit = drv, \ + .oe_bit = -1, \ + .in_bit = -1, \ + .out_bit = -1, \ + .intr_enable_bit = -1, \ + .intr_status_bit = -1, \ + .intr_target_bit = -1, \ + .intr_raw_status_bit = -1, \ + .intr_polarity_bit = -1, \ + .intr_detection_bit = -1, \ + .intr_detection_width = -1, \ + } + +#define UFS_RESET(pg_name, offset) \ + { \ + .name = #pg_name, \ + .pins = pg_name##_pins, \ + .npins = ARRAY_SIZE(pg_name##_pins), \ + .ctl_reg = offset, \ + .io_reg = offset + 0x4, \ + .intr_cfg_reg = 0, \ + .intr_status_reg = 0, \ + .intr_target_reg = 0, \ + .mux_bit = -1, \ + .pull_bit = 3, \ + .drv_bit = 0, \ + .oe_bit = -1, \ + .in_bit = -1, \ + .out_bit = 0, \ + .intr_enable_bit = -1, \ + .intr_status_bit = -1, \ + .intr_target_bit = -1, \ + .intr_raw_status_bit = -1, \ + .intr_polarity_bit = -1, \ + .intr_detection_bit = -1, \ + .intr_detection_width = -1, \ + } + +static const struct pinctrl_pin_desc sdm670_pins[] = { + PINCTRL_PIN(0, "GPIO_0"), + PINCTRL_PIN(1, "GPIO_1"), + PINCTRL_PIN(2, "GPIO_2"), + PINCTRL_PIN(3, "GPIO_3"), + PINCTRL_PIN(4, "GPIO_4"), + PINCTRL_PIN(5, "GPIO_5"), + PINCTRL_PIN(6, "GPIO_6"), + PINCTRL_PIN(7, "GPIO_7"), + PINCTRL_PIN(8, "GPIO_8"), + PINCTRL_PIN(9, "GPIO_9"), + PINCTRL_PIN(10, "GPIO_10"), + PINCTRL_PIN(11, "GPIO_11"), + PINCTRL_PIN(12, "GPIO_12"), + PINCTRL_PIN(13, "GPIO_13"), + PINCTRL_PIN(14, "GPIO_14"), + PINCTRL_PIN(15, "GPIO_15"), + PINCTRL_PIN(16, "GPIO_16"), + PINCTRL_PIN(17, "GPIO_17"), + PINCTRL_PIN(18, "GPIO_18"), + PINCTRL_PIN(19, "GPIO_19"), + PINCTRL_PIN(20, "GPIO_20"), + PINCTRL_PIN(21, "GPIO_21"), + PINCTRL_PIN(22, "GPIO_22"), + PINCTRL_PIN(23, "GPIO_23"), + PINCTRL_PIN(24, "GPIO_24"), + PINCTRL_PIN(25, "GPIO_25"), + PINCTRL_PIN(26, "GPIO_26"), + PINCTRL_PIN(27, "GPIO_27"), + PINCTRL_PIN(28, "GPIO_28"), + PINCTRL_PIN(29, "GPIO_29"), + PINCTRL_PIN(30, "GPIO_30"), + PINCTRL_PIN(31, "GPIO_31"), + PINCTRL_PIN(32, "GPIO_32"), + PINCTRL_PIN(33, "GPIO_33"), + PINCTRL_PIN(34, "GPIO_34"), + PINCTRL_PIN(35, "GPIO_35"), + PINCTRL_PIN(36, "GPIO_36"), + PINCTRL_PIN(37, "GPIO_37"), + PINCTRL_PIN(38, "GPIO_38"), + PINCTRL_PIN(39, "GPIO_39"), + PINCTRL_PIN(40, "GPIO_40"), + PINCTRL_PIN(41, "GPIO_41"), + PINCTRL_PIN(42, "GPIO_42"), + PINCTRL_PIN(43, "GPIO_43"), + PINCTRL_PIN(44, "GPIO_44"), + PINCTRL_PIN(45, "GPIO_45"), + PINCTRL_PIN(46, "GPIO_46"), + PINCTRL_PIN(47, "GPIO_47"), + PINCTRL_PIN(48, "GPIO_48"), + PINCTRL_PIN(49, "GPIO_49"), + PINCTRL_PIN(50, "GPIO_50"), + PINCTRL_PIN(51, "GPIO_51"), + PINCTRL_PIN(52, "GPIO_52"), + PINCTRL_PIN(53, "GPIO_53"), + PINCTRL_PIN(54, "GPIO_54"), + PINCTRL_PIN(55, "GPIO_55"), + PINCTRL_PIN(56, "GPIO_56"), + PINCTRL_PIN(57, "GPIO_57"), + PINCTRL_PIN(58, "GPIO_58"), + PINCTRL_PIN(59, "GPIO_59"), + PINCTRL_PIN(60, "GPIO_60"), + PINCTRL_PIN(61, "GPIO_61"), + PINCTRL_PIN(62, "GPIO_62"), + PINCTRL_PIN(63, "GPIO_63"), + PINCTRL_PIN(64, "GPIO_64"), + PINCTRL_PIN(65, "GPIO_65"), + PINCTRL_PIN(66, "GPIO_66"), + PINCTRL_PIN(67, "GPIO_67"), + PINCTRL_PIN(68, "GPIO_68"), + PINCTRL_PIN(69, "GPIO_69"), + PINCTRL_PIN(70, "GPIO_70"), + PINCTRL_PIN(71, "GPIO_71"), + PINCTRL_PIN(72, "GPIO_72"), + PINCTRL_PIN(73, "GPIO_73"), + PINCTRL_PIN(74, "GPIO_74"), + PINCTRL_PIN(75, "GPIO_75"), + PINCTRL_PIN(76, "GPIO_76"), + PINCTRL_PIN(77, "GPIO_77"), + PINCTRL_PIN(78, "GPIO_78"), + PINCTRL_PIN(79, "GPIO_79"), + PINCTRL_PIN(80, "GPIO_80"), + PINCTRL_PIN(81, "GPIO_81"), + PINCTRL_PIN(82, "GPIO_82"), + PINCTRL_PIN(83, "GPIO_83"), + PINCTRL_PIN(84, "GPIO_84"), + PINCTRL_PIN(85, "GPIO_85"), + PINCTRL_PIN(86, "GPIO_86"), + PINCTRL_PIN(87, "GPIO_87"), + PINCTRL_PIN(88, "GPIO_88"), + PINCTRL_PIN(89, "GPIO_89"), + PINCTRL_PIN(90, "GPIO_90"), + PINCTRL_PIN(91, "GPIO_91"), + PINCTRL_PIN(92, "GPIO_92"), + PINCTRL_PIN(93, "GPIO_93"), + PINCTRL_PIN(94, "GPIO_94"), + PINCTRL_PIN(95, "GPIO_95"), + PINCTRL_PIN(96, "GPIO_96"), + PINCTRL_PIN(97, "GPIO_97"), + PINCTRL_PIN(98, "GPIO_98"), + PINCTRL_PIN(99, "GPIO_99"), + PINCTRL_PIN(100, "GPIO_100"), + PINCTRL_PIN(101, "GPIO_101"), + PINCTRL_PIN(102, "GPIO_102"), + PINCTRL_PIN(103, "GPIO_103"), + PINCTRL_PIN(104, "GPIO_104"), + PINCTRL_PIN(105, "GPIO_105"), + PINCTRL_PIN(106, "GPIO_106"), + PINCTRL_PIN(107, "GPIO_107"), + PINCTRL_PIN(108, "GPIO_108"), + PINCTRL_PIN(109, "GPIO_109"), + PINCTRL_PIN(110, "GPIO_110"), + PINCTRL_PIN(111, "GPIO_111"), + PINCTRL_PIN(112, "GPIO_112"), + PINCTRL_PIN(113, "GPIO_113"), + PINCTRL_PIN(114, "GPIO_114"), + PINCTRL_PIN(115, "GPIO_115"), + PINCTRL_PIN(116, "GPIO_116"), + PINCTRL_PIN(117, "GPIO_117"), + PINCTRL_PIN(118, "GPIO_118"), + PINCTRL_PIN(119, "GPIO_119"), + PINCTRL_PIN(120, "GPIO_120"), + PINCTRL_PIN(121, "GPIO_121"), + PINCTRL_PIN(122, "GPIO_122"), + PINCTRL_PIN(123, "GPIO_123"), + PINCTRL_PIN(124, "GPIO_124"), + PINCTRL_PIN(125, "GPIO_125"), + PINCTRL_PIN(126, "GPIO_126"), + PINCTRL_PIN(127, "GPIO_127"), + PINCTRL_PIN(128, "GPIO_128"), + PINCTRL_PIN(129, "GPIO_129"), + PINCTRL_PIN(130, "GPIO_130"), + PINCTRL_PIN(131, "GPIO_131"), + PINCTRL_PIN(132, "GPIO_132"), + PINCTRL_PIN(133, "GPIO_133"), + PINCTRL_PIN(134, "GPIO_134"), + PINCTRL_PIN(135, "GPIO_135"), + PINCTRL_PIN(136, "GPIO_136"), + PINCTRL_PIN(137, "GPIO_137"), + PINCTRL_PIN(138, "GPIO_138"), + PINCTRL_PIN(139, "GPIO_139"), + PINCTRL_PIN(140, "GPIO_140"), + PINCTRL_PIN(141, "GPIO_141"), + PINCTRL_PIN(142, "GPIO_142"), + PINCTRL_PIN(143, "GPIO_143"), + PINCTRL_PIN(144, "GPIO_144"), + PINCTRL_PIN(145, "GPIO_145"), + PINCTRL_PIN(146, "GPIO_146"), + PINCTRL_PIN(147, "GPIO_147"), + PINCTRL_PIN(148, "GPIO_148"), + PINCTRL_PIN(149, "GPIO_149"), + PINCTRL_PIN(150, "UFS_RESET"), + PINCTRL_PIN(151, "SDC1_RCLK"), + PINCTRL_PIN(152, "SDC1_CLK"), + PINCTRL_PIN(153, "SDC1_CMD"), + PINCTRL_PIN(154, "SDC1_DATA"), + PINCTRL_PIN(155, "SDC2_CLK"), + PINCTRL_PIN(156, "SDC2_CMD"), + PINCTRL_PIN(157, "SDC2_DATA"), +}; + +#define DECLARE_MSM_GPIO_PINS(pin) \ + static const unsigned int gpio##pin##_pins[] = { pin } +DECLARE_MSM_GPIO_PINS(0); +DECLARE_MSM_GPIO_PINS(1); +DECLARE_MSM_GPIO_PINS(2); +DECLARE_MSM_GPIO_PINS(3); +DECLARE_MSM_GPIO_PINS(4); +DECLARE_MSM_GPIO_PINS(5); +DECLARE_MSM_GPIO_PINS(6); +DECLARE_MSM_GPIO_PINS(7); +DECLARE_MSM_GPIO_PINS(8); +DECLARE_MSM_GPIO_PINS(9); +DECLARE_MSM_GPIO_PINS(10); +DECLARE_MSM_GPIO_PINS(11); +DECLARE_MSM_GPIO_PINS(12); +DECLARE_MSM_GPIO_PINS(13); +DECLARE_MSM_GPIO_PINS(14); +DECLARE_MSM_GPIO_PINS(15); +DECLARE_MSM_GPIO_PINS(16); +DECLARE_MSM_GPIO_PINS(17); +DECLARE_MSM_GPIO_PINS(18); +DECLARE_MSM_GPIO_PINS(19); +DECLARE_MSM_GPIO_PINS(20); +DECLARE_MSM_GPIO_PINS(21); +DECLARE_MSM_GPIO_PINS(22); +DECLARE_MSM_GPIO_PINS(23); +DECLARE_MSM_GPIO_PINS(24); +DECLARE_MSM_GPIO_PINS(25); +DECLARE_MSM_GPIO_PINS(26); +DECLARE_MSM_GPIO_PINS(27); +DECLARE_MSM_GPIO_PINS(28); +DECLARE_MSM_GPIO_PINS(29); +DECLARE_MSM_GPIO_PINS(30); +DECLARE_MSM_GPIO_PINS(31); +DECLARE_MSM_GPIO_PINS(32); +DECLARE_MSM_GPIO_PINS(33); +DECLARE_MSM_GPIO_PINS(34); +DECLARE_MSM_GPIO_PINS(35); +DECLARE_MSM_GPIO_PINS(36); +DECLARE_MSM_GPIO_PINS(37); +DECLARE_MSM_GPIO_PINS(38); +DECLARE_MSM_GPIO_PINS(39); +DECLARE_MSM_GPIO_PINS(40); +DECLARE_MSM_GPIO_PINS(41); +DECLARE_MSM_GPIO_PINS(42); +DECLARE_MSM_GPIO_PINS(43); +DECLARE_MSM_GPIO_PINS(44); +DECLARE_MSM_GPIO_PINS(45); +DECLARE_MSM_GPIO_PINS(46); +DECLARE_MSM_GPIO_PINS(47); +DECLARE_MSM_GPIO_PINS(48); +DECLARE_MSM_GPIO_PINS(49); +DECLARE_MSM_GPIO_PINS(50); +DECLARE_MSM_GPIO_PINS(51); +DECLARE_MSM_GPIO_PINS(52); +DECLARE_MSM_GPIO_PINS(53); +DECLARE_MSM_GPIO_PINS(54); +DECLARE_MSM_GPIO_PINS(55); +DECLARE_MSM_GPIO_PINS(56); +DECLARE_MSM_GPIO_PINS(57); +DECLARE_MSM_GPIO_PINS(58); +DECLARE_MSM_GPIO_PINS(59); +DECLARE_MSM_GPIO_PINS(60); +DECLARE_MSM_GPIO_PINS(61); +DECLARE_MSM_GPIO_PINS(62); +DECLARE_MSM_GPIO_PINS(63); +DECLARE_MSM_GPIO_PINS(64); +DECLARE_MSM_GPIO_PINS(65); +DECLARE_MSM_GPIO_PINS(66); +DECLARE_MSM_GPIO_PINS(67); +DECLARE_MSM_GPIO_PINS(68); +DECLARE_MSM_GPIO_PINS(69); +DECLARE_MSM_GPIO_PINS(70); +DECLARE_MSM_GPIO_PINS(71); +DECLARE_MSM_GPIO_PINS(72); +DECLARE_MSM_GPIO_PINS(73); +DECLARE_MSM_GPIO_PINS(74); +DECLARE_MSM_GPIO_PINS(75); +DECLARE_MSM_GPIO_PINS(76); +DECLARE_MSM_GPIO_PINS(77); +DECLARE_MSM_GPIO_PINS(78); +DECLARE_MSM_GPIO_PINS(79); +DECLARE_MSM_GPIO_PINS(80); +DECLARE_MSM_GPIO_PINS(81); +DECLARE_MSM_GPIO_PINS(82); +DECLARE_MSM_GPIO_PINS(83); +DECLARE_MSM_GPIO_PINS(84); +DECLARE_MSM_GPIO_PINS(85); +DECLARE_MSM_GPIO_PINS(86); +DECLARE_MSM_GPIO_PINS(87); +DECLARE_MSM_GPIO_PINS(88); +DECLARE_MSM_GPIO_PINS(89); +DECLARE_MSM_GPIO_PINS(90); +DECLARE_MSM_GPIO_PINS(91); +DECLARE_MSM_GPIO_PINS(92); +DECLARE_MSM_GPIO_PINS(93); +DECLARE_MSM_GPIO_PINS(94); +DECLARE_MSM_GPIO_PINS(95); +DECLARE_MSM_GPIO_PINS(96); +DECLARE_MSM_GPIO_PINS(97); +DECLARE_MSM_GPIO_PINS(98); +DECLARE_MSM_GPIO_PINS(99); +DECLARE_MSM_GPIO_PINS(100); +DECLARE_MSM_GPIO_PINS(101); +DECLARE_MSM_GPIO_PINS(102); +DECLARE_MSM_GPIO_PINS(103); +DECLARE_MSM_GPIO_PINS(104); +DECLARE_MSM_GPIO_PINS(105); +DECLARE_MSM_GPIO_PINS(106); +DECLARE_MSM_GPIO_PINS(107); +DECLARE_MSM_GPIO_PINS(108); +DECLARE_MSM_GPIO_PINS(109); +DECLARE_MSM_GPIO_PINS(110); +DECLARE_MSM_GPIO_PINS(111); +DECLARE_MSM_GPIO_PINS(112); +DECLARE_MSM_GPIO_PINS(113); +DECLARE_MSM_GPIO_PINS(114); +DECLARE_MSM_GPIO_PINS(115); +DECLARE_MSM_GPIO_PINS(116); +DECLARE_MSM_GPIO_PINS(117); +DECLARE_MSM_GPIO_PINS(118); +DECLARE_MSM_GPIO_PINS(119); +DECLARE_MSM_GPIO_PINS(120); +DECLARE_MSM_GPIO_PINS(121); +DECLARE_MSM_GPIO_PINS(122); +DECLARE_MSM_GPIO_PINS(123); +DECLARE_MSM_GPIO_PINS(124); +DECLARE_MSM_GPIO_PINS(125); +DECLARE_MSM_GPIO_PINS(126); +DECLARE_MSM_GPIO_PINS(127); +DECLARE_MSM_GPIO_PINS(128); +DECLARE_MSM_GPIO_PINS(129); +DECLARE_MSM_GPIO_PINS(130); +DECLARE_MSM_GPIO_PINS(131); +DECLARE_MSM_GPIO_PINS(132); +DECLARE_MSM_GPIO_PINS(133); +DECLARE_MSM_GPIO_PINS(134); +DECLARE_MSM_GPIO_PINS(135); +DECLARE_MSM_GPIO_PINS(136); +DECLARE_MSM_GPIO_PINS(137); +DECLARE_MSM_GPIO_PINS(138); +DECLARE_MSM_GPIO_PINS(139); +DECLARE_MSM_GPIO_PINS(140); +DECLARE_MSM_GPIO_PINS(141); +DECLARE_MSM_GPIO_PINS(142); +DECLARE_MSM_GPIO_PINS(143); +DECLARE_MSM_GPIO_PINS(144); +DECLARE_MSM_GPIO_PINS(145); +DECLARE_MSM_GPIO_PINS(146); +DECLARE_MSM_GPIO_PINS(147); +DECLARE_MSM_GPIO_PINS(148); +DECLARE_MSM_GPIO_PINS(149); + +static const unsigned int ufs_reset_pins[] = { 150 }; +static const unsigned int sdc1_rclk_pins[] = { 151 }; +static const unsigned int sdc1_clk_pins[] = { 152 }; +static const unsigned int sdc1_cmd_pins[] = { 153 }; +static const unsigned int sdc1_data_pins[] = { 154 }; +static const unsigned int sdc2_clk_pins[] = { 155 }; +static const unsigned int sdc2_cmd_pins[] = { 156 }; +static const unsigned int sdc2_data_pins[] = { 157 }; + +enum sdm670_functions { + msm_mux_gpio, + msm_mux_adsp_ext, + msm_mux_agera_pll, + msm_mux_atest_char, + msm_mux_atest_tsens, + msm_mux_atest_tsens2, + msm_mux_atest_usb1, + msm_mux_atest_usb10, + msm_mux_atest_usb11, + msm_mux_atest_usb12, + msm_mux_atest_usb13, + msm_mux_atest_usb2, + msm_mux_atest_usb20, + msm_mux_atest_usb21, + msm_mux_atest_usb22, + msm_mux_atest_usb23, + msm_mux_cam_mclk, + msm_mux_cci_async, + msm_mux_cci_i2c, + msm_mux_cci_timer0, + msm_mux_cci_timer1, + msm_mux_cci_timer2, + msm_mux_cci_timer3, + msm_mux_cci_timer4, + msm_mux_copy_gp, + msm_mux_copy_phase, + msm_mux_dbg_out, + msm_mux_ddr_bist, + msm_mux_ddr_pxi0, + msm_mux_ddr_pxi1, + msm_mux_ddr_pxi2, + msm_mux_ddr_pxi3, + msm_mux_edp_hot, + msm_mux_edp_lcd, + msm_mux_gcc_gp1, + msm_mux_gcc_gp2, + msm_mux_gcc_gp3, + msm_mux_gp_pdm0, + msm_mux_gp_pdm1, + msm_mux_gp_pdm2, + msm_mux_gps_tx, + msm_mux_jitter_bist, + msm_mux_ldo_en, + msm_mux_ldo_update, + msm_mux_lpass_slimbus, + msm_mux_m_voc, + msm_mux_mdp_vsync, + msm_mux_mdp_vsync0, + msm_mux_mdp_vsync1, + msm_mux_mdp_vsync2, + msm_mux_mdp_vsync3, + msm_mux_mss_lte, + msm_mux_nav_pps, + msm_mux_pa_indicator, + msm_mux_pci_e0, + msm_mux_pci_e1, + msm_mux_phase_flag, + msm_mux_pll_bist, + msm_mux_pll_bypassnl, + msm_mux_pll_reset, + msm_mux_pri_mi2s, + msm_mux_pri_mi2s_ws, + msm_mux_prng_rosc, + msm_mux_qdss_cti, + msm_mux_qdss, + msm_mux_qlink_enable, + msm_mux_qlink_request, + msm_mux_qua_mi2s, + msm_mux_qup0, + msm_mux_qup1, + msm_mux_qup10, + msm_mux_qup11, + msm_mux_qup12, + msm_mux_qup13, + msm_mux_qup14, + msm_mux_qup15, + msm_mux_qup2, + msm_mux_qup3, + msm_mux_qup4, + msm_mux_qup5, + msm_mux_qup6, + msm_mux_qup7, + msm_mux_qup8, + msm_mux_qup9, + msm_mux_qup_l4, + msm_mux_qup_l5, + msm_mux_qup_l6, + msm_mux_sd_write, + msm_mux_sdc4_clk, + msm_mux_sdc4_cmd, + msm_mux_sdc4_data, + msm_mux_sec_mi2s, + msm_mux_ter_mi2s, + msm_mux_tgu_ch0, + msm_mux_tgu_ch1, + msm_mux_tgu_ch2, + msm_mux_tgu_ch3, + msm_mux_tsif1_clk, + msm_mux_tsif1_data, + msm_mux_tsif1_en, + msm_mux_tsif1_error, + msm_mux_tsif1_sync, + msm_mux_tsif2_clk, + msm_mux_tsif2_data, + msm_mux_tsif2_en, + msm_mux_tsif2_error, + msm_mux_tsif2_sync, + msm_mux_uim1_clk, + msm_mux_uim1_data, + msm_mux_uim1_present, + msm_mux_uim1_reset, + msm_mux_uim2_clk, + msm_mux_uim2_data, + msm_mux_uim2_present, + msm_mux_uim2_reset, + msm_mux_uim_batt, + msm_mux_usb_phy, + msm_mux_vfr_1, + msm_mux_vsense_trigger, + msm_mux_wlan1_adc0, + msm_mux_wlan1_adc1, + msm_mux_wlan2_adc0, + msm_mux_wlan2_adc1, + msm_mux_wsa_clk, + msm_mux_wsa_data, + msm_mux__, +}; + +static const char * const gpio_groups[] = { + "gpio0", "gpio1", "gpio2", "gpio3", "gpio4", "gpio5", "gpio6", "gpio7", + "gpio8", "gpio9", "gpio10", "gpio11", "gpio12", "gpio13", "gpio14", + "gpio15", "gpio16", "gpio17", "gpio18", "gpio19", "gpio20", "gpio21", + "gpio22", "gpio23", "gpio24", "gpio25", "gpio26", "gpio27", "gpio28", + "gpio29", "gpio30", "gpio31", "gpio32", "gpio33", "gpio34", "gpio35", + "gpio36", "gpio37", "gpio38", "gpio39", "gpio40", "gpio41", "gpio42", + "gpio43", "gpio44", "gpio45", "gpio46", "gpio47", "gpio48", "gpio49", + "gpio50", "gpio51", "gpio52", "gpio53", "gpio54", "gpio55", "gpio56", + "gpio57", "gpio65", "gpio66", "gpio67", "gpio68", "gpio75", "gpio76", + "gpio77", "gpio78", "gpio79", "gpio80", "gpio81", "gpio82", "gpio83", + "gpio84", "gpio85", "gpio86", "gpio87", "gpio88", "gpio89", "gpio90", + "gpio91", "gpio92", "gpio93", "gpio94", "gpio95", "gpio96", "gpio97", + "gpio98", "gpio99", "gpio100", "gpio101", "gpio102", "gpio103", + "gpio105", "gpio106", "gpio107", "gpio108", "gpio109", "gpio110", + "gpio111", "gpio112", "gpio113", "gpio114", "gpio115", "gpio116", + "gpio117", "gpio118", "gpio119", "gpio120", "gpio121", "gpio122", + "gpio123", "gpio124", "gpio125", "gpio126", "gpio127", "gpio128", + "gpio129", "gpio130", "gpio131", "gpio132", "gpio133", "gpio134", + "gpio135", "gpio136", "gpio137", "gpio138", "gpio139", "gpio140", + "gpio141", "gpio142", "gpio143", "gpio144", "gpio145", "gpio146", + "gpio147", "gpio148", "gpio149", +}; +static const char * const qup0_groups[] = { + "gpio0", "gpio1", "gpio2", "gpio3", +}; +static const char * const qup9_groups[] = { + "gpio4", "gpio5", "gpio6", "gpio7", +}; +static const char * const qdss_cti_groups[] = { + "gpio4", "gpio5", "gpio51", "gpio52", "gpio90", "gpio91", +}; +static const char * const ddr_pxi0_groups[] = { + "gpio6", "gpio7", +}; +static const char * const ddr_bist_groups[] = { + "gpio7", "gpio8", "gpio9", "gpio10", +}; +static const char * const atest_tsens2_groups[] = { + "gpio7", +}; +static const char * const vsense_trigger_groups[] = { + "gpio7", +}; +static const char * const atest_usb1_groups[] = { + "gpio7", +}; +static const char * const qup_l4_groups[] = { + "gpio8", "gpio35", "gpio75", "gpio105", "gpio123", +}; +static const char * const gp_pdm1_groups[] = { + "gpio8", "gpio66", +}; +static const char * const qup_l5_groups[] = { + "gpio9", "gpio36", "gpio76", "gpio106", "gpio124", +}; +static const char * const mdp_vsync_groups[] = { + "gpio10", "gpio11", "gpio12", "gpio97", "gpio98", +}; +static const char * const qup_l6_groups[] = { + "gpio10", "gpio37", "gpio77", "gpio107", "gpio125", +}; +static const char * const wlan2_adc1_groups[] = { + "gpio10", +}; +static const char * const atest_usb11_groups[] = { + "gpio10", +}; +static const char * const ddr_pxi2_groups[] = { + "gpio10", "gpio11", +}; +static const char * const edp_lcd_groups[] = { + "gpio11", +}; +static const char * const dbg_out_groups[] = { + "gpio11", +}; +static const char * const wlan2_adc0_groups[] = { + "gpio11", +}; +static const char * const atest_usb10_groups[] = { + "gpio11", +}; +static const char * const m_voc_groups[] = { + "gpio12", +}; +static const char * const tsif1_sync_groups[] = { + "gpio12", +}; +static const char * const ddr_pxi3_groups[] = { + "gpio12", "gpio13", +}; +static const char * const cam_mclk_groups[] = { + "gpio13", "gpio14", "gpio15", "gpio16", +}; +static const char * const pll_bypassnl_groups[] = { + "gpio13", +}; +static const char * const qdss_groups[] = { + "gpio13", "gpio14", "gpio15", "gpio16", "gpio17", "gpio18", "gpio19", + "gpio20", "gpio21", "gpio22", "gpio23", "gpio24", "gpio25", "gpio26", + "gpio27", "gpio28", "gpio29", "gpio30", "gpio41", "gpio42", "gpio43", + "gpio44", "gpio75", "gpio76", "gpio77", "gpio79", "gpio80", "gpio93", + "gpio117", "gpio118", "gpio119", "gpio120", "gpio121", "gpio122", + "gpio123", "gpio124", +}; +static const char * const pll_reset_groups[] = { + "gpio14", +}; +static const char * const cci_i2c_groups[] = { + "gpio17", "gpio18", "gpio19", "gpio20", +}; +static const char * const qup1_groups[] = { + "gpio17", "gpio18", "gpio19", "gpio20", +}; +static const char * const cci_timer0_groups[] = { + "gpio21", +}; +static const char * const gcc_gp2_groups[] = { + "gpio21", +}; +static const char * const cci_timer1_groups[] = { + "gpio22", +}; +static const char * const gcc_gp3_groups[] = { + "gpio22", +}; +static const char * const cci_timer2_groups[] = { + "gpio23", +}; +static const char * const cci_timer3_groups[] = { + "gpio24", +}; +static const char * const cci_async_groups[] = { + "gpio24", "gpio25", "gpio26", +}; +static const char * const cci_timer4_groups[] = { + "gpio25", +}; +static const char * const jitter_bist_groups[] = { + "gpio26", "gpio35", +}; +static const char * const qup2_groups[] = { + "gpio27", "gpio28", "gpio29", "gpio30", +}; +static const char * const pll_bist_groups[] = { + "gpio27", "gpio36", +}; +static const char * const agera_pll_groups[] = { + "gpio28", "gpio37", +}; +static const char * const atest_tsens_groups[] = { + "gpio29", +}; +static const char * const phase_flag_groups[] = { + "gpio29", "gpio30", "gpio52", "gpio53", "gpio54", "gpio55", "gpio56", + "gpio57", "gpio75", "gpio76", "gpio77", "gpio89", "gpio90", "gpio96", + "gpio99", "gpio100", "gpio101", "gpio137", "gpio138", "gpio139", + "gpio140", "gpio141", "gpio142", "gpio143", +}; +static const char * const qup11_groups[] = { + "gpio31", "gpio32", "gpio33", "gpio34", +}; +static const char * const qup14_groups[] = { + "gpio31", "gpio32", "gpio33", "gpio34", +}; +static const char * const pci_e0_groups[] = { + "gpio35", "gpio36", +}; +static const char * const usb_phy_groups[] = { + "gpio38", +}; +static const char * const lpass_slimbus_groups[] = { + "gpio39", +}; +static const char * const sd_write_groups[] = { + "gpio40", +}; +static const char * const tsif1_error_groups[] = { + "gpio40", +}; +static const char * const qup3_groups[] = { + "gpio41", "gpio42", "gpio43", "gpio44", +}; +static const char * const qup6_groups[] = { + "gpio45", "gpio46", "gpio47", "gpio48", +}; +static const char * const qup12_groups[] = { + "gpio49", "gpio50", "gpio51", "gpio52", +}; +static const char * const qup10_groups[] = { + "gpio53", "gpio54", "gpio55", "gpio56", +}; +static const char * const gp_pdm0_groups[] = { + "gpio54", "gpio95", +}; +static const char * const wlan1_adc1_groups[] = { + "gpio54", +}; +static const char * const atest_usb13_groups[] = { + "gpio54", +}; +static const char * const ddr_pxi1_groups[] = { + "gpio54", "gpio55", +}; +static const char * const wlan1_adc0_groups[] = { + "gpio55", +}; +static const char * const atest_usb12_groups[] = { + "gpio55", +}; +static const char * const qua_mi2s_groups[] = { + "gpio57", +}; +static const char * const gcc_gp1_groups[] = { + "gpio57", "gpio78", +}; +static const char * const pri_mi2s_groups[] = { + "gpio65", "gpio67", "gpio68", +}; +static const char * const qup8_groups[] = { + "gpio65", "gpio66", "gpio67", "gpio68", +}; +static const char * const wsa_clk_groups[] = { + "gpio65", +}; +static const char * const pri_mi2s_ws_groups[] = { + "gpio66", +}; +static const char * const wsa_data_groups[] = { + "gpio66", +}; +static const char * const atest_usb2_groups[] = { + "gpio67", +}; +static const char * const atest_usb23_groups[] = { + "gpio68", +}; +static const char * const ter_mi2s_groups[] = { + "gpio75", "gpio76", "gpio77", "gpio78", +}; +static const char * const atest_usb22_groups[] = { + "gpio75", +}; +static const char * const atest_usb21_groups[] = { + "gpio76", +}; +static const char * const atest_usb20_groups[] = { + "gpio77", +}; +static const char * const sec_mi2s_groups[] = { + "gpio79", "gpio80", "gpio81", "gpio82", "gpio83", +}; +static const char * const gp_pdm2_groups[] = { + "gpio79", +}; +static const char * const qup15_groups[] = { + "gpio81", "gpio82", "gpio83", "gpio84", +}; +static const char * const qup5_groups[] = { + "gpio85", "gpio86", "gpio87", "gpio88", +}; +static const char * const copy_gp_groups[] = { + "gpio86", +}; +static const char * const tsif1_clk_groups[] = { + "gpio89", +}; +static const char * const qup4_groups[] = { + "gpio89", "gpio90", "gpio91", "gpio92", +}; +static const char * const tgu_ch3_groups[] = { + "gpio89", +}; +static const char * const tsif1_en_groups[] = { + "gpio90", +}; +static const char * const mdp_vsync0_groups[] = { + "gpio90", +}; +static const char * const mdp_vsync1_groups[] = { + "gpio90", +}; +static const char * const mdp_vsync2_groups[] = { + "gpio90", +}; +static const char * const mdp_vsync3_groups[] = { + "gpio90", +}; +static const char * const tgu_ch0_groups[] = { + "gpio90", +}; +static const char * const tsif1_data_groups[] = { + "gpio91", +}; +static const char * const sdc4_cmd_groups[] = { + "gpio91", +}; +static const char * const tgu_ch1_groups[] = { + "gpio91", +}; +static const char * const tsif2_error_groups[] = { + "gpio92", +}; +static const char * const vfr_1_groups[] = { + "gpio92", +}; +static const char * const tgu_ch2_groups[] = { + "gpio92", +}; +static const char * const sdc4_data_groups[] = { + "gpio92", "gpio94", "gpio95", "gpio96", +}; +static const char * const tsif2_clk_groups[] = { + "gpio93", +}; +static const char * const sdc4_clk_groups[] = { + "gpio93", +}; +static const char * const qup7_groups[] = { + "gpio93", "gpio94", "gpio95", "gpio96", +}; +static const char * const tsif2_en_groups[] = { + "gpio94", +}; +static const char * const tsif2_data_groups[] = { + "gpio95", +}; +static const char * const tsif2_sync_groups[] = { + "gpio96", +}; +static const char * const ldo_en_groups[] = { + "gpio97", +}; +static const char * const ldo_update_groups[] = { + "gpio98", +}; +static const char * const prng_rosc_groups[] = { + "gpio99", "gpio102", +}; +static const char * const pci_e1_groups[] = { + "gpio102", "gpio103", +}; +static const char * const copy_phase_groups[] = { + "gpio103", +}; +static const char * const uim2_data_groups[] = { + "gpio105", +}; +static const char * const qup13_groups[] = { + "gpio105", "gpio106", "gpio107", "gpio108", +}; +static const char * const uim2_clk_groups[] = { + "gpio106", +}; +static const char * const uim2_reset_groups[] = { + "gpio107", +}; +static const char * const uim2_present_groups[] = { + "gpio108", +}; +static const char * const uim1_data_groups[] = { + "gpio109", +}; +static const char * const uim1_clk_groups[] = { + "gpio110", +}; +static const char * const uim1_reset_groups[] = { + "gpio111", +}; +static const char * const uim1_present_groups[] = { + "gpio112", +}; +static const char * const uim_batt_groups[] = { + "gpio113", +}; +static const char * const edp_hot_groups[] = { + "gpio113", +}; +static const char * const nav_pps_groups[] = { + "gpio114", "gpio114", "gpio115", "gpio115", "gpio128", "gpio128", + "gpio129", "gpio129", "gpio143", "gpio143", +}; +static const char * const gps_tx_groups[] = { + "gpio114", "gpio115", "gpio128", "gpio129", "gpio143", "gpio145", +}; +static const char * const atest_char_groups[] = { + "gpio117", "gpio118", "gpio119", "gpio120", "gpio121", +}; +static const char * const adsp_ext_groups[] = { + "gpio118", +}; +static const char * const qlink_request_groups[] = { + "gpio130", +}; +static const char * const qlink_enable_groups[] = { + "gpio131", +}; +static const char * const pa_indicator_groups[] = { + "gpio135", +}; +static const char * const mss_lte_groups[] = { + "gpio144", "gpio145", +}; + +static const struct msm_function sdm670_functions[] = { + FUNCTION(gpio), + FUNCTION(adsp_ext), + FUNCTION(agera_pll), + FUNCTION(atest_char), + FUNCTION(atest_tsens), + FUNCTION(atest_tsens2), + FUNCTION(atest_usb1), + FUNCTION(atest_usb10), + FUNCTION(atest_usb11), + FUNCTION(atest_usb12), + FUNCTION(atest_usb13), + FUNCTION(atest_usb2), + FUNCTION(atest_usb20), + FUNCTION(atest_usb21), + FUNCTION(atest_usb22), + FUNCTION(atest_usb23), + FUNCTION(cam_mclk), + FUNCTION(cci_async), + FUNCTION(cci_i2c), + FUNCTION(cci_timer0), + FUNCTION(cci_timer1), + FUNCTION(cci_timer2), + FUNCTION(cci_timer3), + FUNCTION(cci_timer4), + FUNCTION(copy_gp), + FUNCTION(copy_phase), + FUNCTION(dbg_out), + FUNCTION(ddr_bist), + FUNCTION(ddr_pxi0), + FUNCTION(ddr_pxi1), + FUNCTION(ddr_pxi2), + FUNCTION(ddr_pxi3), + FUNCTION(edp_hot), + FUNCTION(edp_lcd), + FUNCTION(gcc_gp1), + FUNCTION(gcc_gp2), + FUNCTION(gcc_gp3), + FUNCTION(gp_pdm0), + FUNCTION(gp_pdm1), + FUNCTION(gp_pdm2), + FUNCTION(gps_tx), + FUNCTION(jitter_bist), + FUNCTION(ldo_en), + FUNCTION(ldo_update), + FUNCTION(lpass_slimbus), + FUNCTION(m_voc), + FUNCTION(mdp_vsync), + FUNCTION(mdp_vsync0), + FUNCTION(mdp_vsync1), + FUNCTION(mdp_vsync2), + FUNCTION(mdp_vsync3), + FUNCTION(mss_lte), + FUNCTION(nav_pps), + FUNCTION(pa_indicator), + FUNCTION(pci_e0), + FUNCTION(pci_e1), + FUNCTION(phase_flag), + FUNCTION(pll_bist), + FUNCTION(pll_bypassnl), + FUNCTION(pll_reset), + FUNCTION(pri_mi2s), + FUNCTION(pri_mi2s_ws), + FUNCTION(prng_rosc), + FUNCTION(qdss_cti), + FUNCTION(qdss), + FUNCTION(qlink_enable), + FUNCTION(qlink_request), + FUNCTION(qua_mi2s), + FUNCTION(qup0), + FUNCTION(qup1), + FUNCTION(qup10), + FUNCTION(qup11), + FUNCTION(qup12), + FUNCTION(qup13), + FUNCTION(qup14), + FUNCTION(qup15), + FUNCTION(qup2), + FUNCTION(qup3), + FUNCTION(qup4), + FUNCTION(qup5), + FUNCTION(qup6), + FUNCTION(qup7), + FUNCTION(qup8), + FUNCTION(qup9), + FUNCTION(qup_l4), + FUNCTION(qup_l5), + FUNCTION(qup_l6), + FUNCTION(sdc4_clk), + FUNCTION(sdc4_cmd), + FUNCTION(sdc4_data), + FUNCTION(sd_write), + FUNCTION(sec_mi2s), + FUNCTION(ter_mi2s), + FUNCTION(tgu_ch0), + FUNCTION(tgu_ch1), + FUNCTION(tgu_ch2), + FUNCTION(tgu_ch3), + FUNCTION(tsif1_clk), + FUNCTION(tsif1_data), + FUNCTION(tsif1_en), + FUNCTION(tsif1_error), + FUNCTION(tsif1_sync), + FUNCTION(tsif2_clk), + FUNCTION(tsif2_data), + FUNCTION(tsif2_en), + FUNCTION(tsif2_error), + FUNCTION(tsif2_sync), + FUNCTION(uim1_clk), + FUNCTION(uim1_data), + FUNCTION(uim1_present), + FUNCTION(uim1_reset), + FUNCTION(uim2_clk), + FUNCTION(uim2_data), + FUNCTION(uim2_present), + FUNCTION(uim2_reset), + FUNCTION(uim_batt), + FUNCTION(usb_phy), + FUNCTION(vfr_1), + FUNCTION(vsense_trigger), + FUNCTION(wlan1_adc0), + FUNCTION(wlan1_adc1), + FUNCTION(wlan2_adc0), + FUNCTION(wlan2_adc1), + FUNCTION(wsa_clk), + FUNCTION(wsa_data), +}; + +/* + * Each pin is individually controlled by its own group and gpios that cannot + * be requested are represented by the PINGROUP_DUMMY macro so that the group + * numbers and names correspond to their respective gpio. These dummy pins do + * not have a valid set of pinfuncs or a valid ctl_reg and should not be + * requested. + */ +static const struct msm_pingroup sdm670_groups[] = { + PINGROUP(0, SOUTH, qup0, _, _, _, _, _, _, _, _), + PINGROUP(1, SOUTH, qup0, _, _, _, _, _, _, _, _), + PINGROUP(2, SOUTH, qup0, _, _, _, _, _, _, _, _), + PINGROUP(3, SOUTH, qup0, _, _, _, _, _, _, _, _), + PINGROUP(4, NORTH, qup9, qdss_cti, _, _, _, _, _, _, _), + PINGROUP(5, NORTH, qup9, qdss_cti, _, _, _, _, _, _, _), + PINGROUP(6, NORTH, qup9, _, ddr_pxi0, _, _, _, _, _, _), + PINGROUP(7, NORTH, qup9, ddr_bist, _, atest_tsens2, vsense_trigger, atest_usb1, ddr_pxi0, _, _), + PINGROUP(8, WEST, qup_l4, gp_pdm1, ddr_bist, _, _, _, _, _, _), + PINGROUP(9, WEST, qup_l5, ddr_bist, _, _, _, _, _, _, _), + PINGROUP(10, NORTH, mdp_vsync, qup_l6, ddr_bist, wlan2_adc1, atest_usb11, ddr_pxi2, _, _, _), + PINGROUP(11, NORTH, mdp_vsync, edp_lcd, dbg_out, wlan2_adc0, atest_usb10, ddr_pxi2, _, _, _), + PINGROUP(12, SOUTH, mdp_vsync, m_voc, tsif1_sync, ddr_pxi3, _, _, _, _, _), + PINGROUP(13, WEST, cam_mclk, pll_bypassnl, qdss, ddr_pxi3, _, _, _, _, _), + PINGROUP(14, WEST, cam_mclk, pll_reset, qdss, _, _, _, _, _, _), + PINGROUP(15, WEST, cam_mclk, qdss, _, _, _, _, _, _, _), + PINGROUP(16, WEST, cam_mclk, qdss, _, _, _, _, _, _, _), + PINGROUP(17, WEST, cci_i2c, qup1, qdss, _, _, _, _, _, _), + PINGROUP(18, WEST, cci_i2c, qup1, _, qdss, _, _, _, _, _), + PINGROUP(19, WEST, cci_i2c, qup1, _, qdss, _, _, _, _, _), + PINGROUP(20, WEST, cci_i2c, qup1, _, qdss, _, _, _, _, _), + PINGROUP(21, WEST, cci_timer0, gcc_gp2, qdss, _, _, _, _, _, _), + PINGROUP(22, WEST, cci_timer1, gcc_gp3, qdss, _, _, _, _, _, _), + PINGROUP(23, WEST, cci_timer2, qdss, _, _, _, _, _, _, _), + PINGROUP(24, WEST, cci_timer3, cci_async, qdss, _, _, _, _, _, _), + PINGROUP(25, WEST, cci_timer4, cci_async, qdss, _, _, _, _, _, _), + PINGROUP(26, WEST, cci_async, qdss, jitter_bist, _, _, _, _, _, _), + PINGROUP(27, WEST, qup2, qdss, pll_bist, _, _, _, _, _, _), + PINGROUP(28, WEST, qup2, qdss, agera_pll, _, _, _, _, _, _), + PINGROUP(29, WEST, qup2, _, phase_flag, qdss, atest_tsens, _, _, _, _), + PINGROUP(30, WEST, qup2, phase_flag, qdss, _, _, _, _, _, _), + PINGROUP(31, WEST, qup11, qup14, _, _, _, _, _, _, _), + PINGROUP(32, WEST, qup11, qup14, _, _, _, _, _, _, _), + PINGROUP(33, WEST, qup11, qup14, _, _, _, _, _, _, _), + PINGROUP(34, WEST, qup11, qup14, _, _, _, _, _, _, _), + PINGROUP(35, NORTH, pci_e0, qup_l4, jitter_bist, _, _, _, _, _, _), + PINGROUP(36, NORTH, pci_e0, qup_l5, pll_bist, _, _, _, _, _, _), + PINGROUP(37, NORTH, qup_l6, agera_pll, _, _, _, _, _, _, _), + PINGROUP(38, NORTH, usb_phy, _, _, _, _, _, _, _, _), + PINGROUP(39, NORTH, lpass_slimbus, _, _, _, _, _, _, _, _), + PINGROUP(40, NORTH, sd_write, tsif1_error, _, _, _, _, _, _, _), + PINGROUP(41, SOUTH, qup3, _, qdss, _, _, _, _, _, _), + PINGROUP(42, SOUTH, qup3, _, qdss, _, _, _, _, _, _), + PINGROUP(43, SOUTH, qup3, _, qdss, _, _, _, _, _, _), + PINGROUP(44, SOUTH, qup3, _, qdss, _, _, _, _, _, _), + PINGROUP(45, SOUTH, qup6, _, _, _, _, _, _, _, _), + PINGROUP(46, SOUTH, qup6, _, _, _, _, _, _, _, _), + PINGROUP(47, SOUTH, qup6, _, _, _, _, _, _, _, _), + PINGROUP(48, SOUTH, qup6, _, _, _, _, _, _, _, _), + PINGROUP(49, NORTH, qup12, _, _, _, _, _, _, _, _), + PINGROUP(50, NORTH, qup12, _, _, _, _, _, _, _, _), + PINGROUP(51, NORTH, qup12, qdss_cti, _, _, _, _, _, _, _), + PINGROUP(52, NORTH, qup12, phase_flag, qdss_cti, _, _, _, _, _, _), + PINGROUP(53, NORTH, qup10, phase_flag, _, _, _, _, _, _, _), + PINGROUP(54, NORTH, qup10, gp_pdm0, phase_flag, _, wlan1_adc1, atest_usb13, ddr_pxi1, _, _), + PINGROUP(55, NORTH, qup10, phase_flag, _, wlan1_adc0, atest_usb12, ddr_pxi1, _, _, _), + PINGROUP(56, NORTH, qup10, phase_flag, _, _, _, _, _, _, _), + PINGROUP(57, NORTH, qua_mi2s, gcc_gp1, phase_flag, _, _, _, _, _, _), + PINGROUP_DUMMY(58), + PINGROUP_DUMMY(59), + PINGROUP_DUMMY(60), + PINGROUP_DUMMY(61), + PINGROUP_DUMMY(62), + PINGROUP_DUMMY(63), + PINGROUP_DUMMY(64), + PINGROUP(65, NORTH, pri_mi2s, qup8, wsa_clk, _, _, _, _, _, _), + PINGROUP(66, NORTH, pri_mi2s_ws, qup8, wsa_data, gp_pdm1, _, _, _, _, _), + PINGROUP(67, NORTH, pri_mi2s, qup8, _, atest_usb2, _, _, _, _, _), + PINGROUP(68, NORTH, pri_mi2s, qup8, _, atest_usb23, _, _, _, _, _), + PINGROUP_DUMMY(69), + PINGROUP_DUMMY(70), + PINGROUP_DUMMY(71), + PINGROUP_DUMMY(72), + PINGROUP_DUMMY(73), + PINGROUP_DUMMY(74), + PINGROUP(75, NORTH, ter_mi2s, phase_flag, qdss, atest_usb22, qup_l4, _, _, _, _), + PINGROUP(76, NORTH, ter_mi2s, phase_flag, qdss, atest_usb21, qup_l5, _, _, _, _), + PINGROUP(77, NORTH, ter_mi2s, phase_flag, qdss, atest_usb20, qup_l6, _, _, _, _), + PINGROUP(78, NORTH, ter_mi2s, gcc_gp1, _, _, _, _, _, _, _), + PINGROUP(79, NORTH, sec_mi2s, gp_pdm2, _, qdss, _, _, _, _, _), + PINGROUP(80, NORTH, sec_mi2s, _, qdss, _, _, _, _, _, _), + PINGROUP(81, NORTH, sec_mi2s, qup15, _, _, _, _, _, _, _), + PINGROUP(82, NORTH, sec_mi2s, qup15, _, _, _, _, _, _, _), + PINGROUP(83, NORTH, sec_mi2s, qup15, _, _, _, _, _, _, _), + PINGROUP(84, NORTH, qup15, _, _, _, _, _, _, _, _), + PINGROUP(85, SOUTH, qup5, _, _, _, _, _, _, _, _), + PINGROUP(86, SOUTH, qup5, copy_gp, _, _, _, _, _, _, _), + PINGROUP(87, SOUTH, qup5, _, _, _, _, _, _, _, _), + PINGROUP(88, SOUTH, qup5, _, _, _, _, _, _, _, _), + PINGROUP(89, SOUTH, tsif1_clk, qup4, tgu_ch3, phase_flag, _, _, _, _, _), + PINGROUP(90, SOUTH, tsif1_en, mdp_vsync0, qup4, mdp_vsync1, mdp_vsync2, mdp_vsync3, tgu_ch0, phase_flag, qdss_cti), + PINGROUP(91, SOUTH, tsif1_data, sdc4_cmd, qup4, tgu_ch1, _, qdss_cti, _, _, _), + PINGROUP(92, SOUTH, tsif2_error, sdc4_data, qup4, vfr_1, tgu_ch2, _, _, _, _), + PINGROUP(93, SOUTH, tsif2_clk, sdc4_clk, qup7, _, qdss, _, _, _, _), + PINGROUP(94, SOUTH, tsif2_en, sdc4_data, qup7, _, _, _, _, _, _), + PINGROUP(95, SOUTH, tsif2_data, sdc4_data, qup7, gp_pdm0, _, _, _, _, _), + PINGROUP(96, SOUTH, tsif2_sync, sdc4_data, qup7, phase_flag, _, _, _, _, _), + PINGROUP(97, WEST, _, _, mdp_vsync, ldo_en, _, _, _, _, _), + PINGROUP(98, WEST, _, mdp_vsync, ldo_update, _, _, _, _, _, _), + PINGROUP(99, NORTH, phase_flag, prng_rosc, _, _, _, _, _, _, _), + PINGROUP(100, WEST, phase_flag, _, _, _, _, _, _, _, _), + PINGROUP(101, WEST, _, phase_flag, _, _, _, _, _, _, _), + PINGROUP(102, WEST, pci_e1, prng_rosc, _, _, _, _, _, _, _), + PINGROUP(103, WEST, pci_e1, copy_phase, _, _, _, _, _, _, _), + PINGROUP_DUMMY(104), + PINGROUP(105, NORTH, uim2_data, qup13, qup_l4, _, _, _, _, _, _), + PINGROUP(106, NORTH, uim2_clk, qup13, qup_l5, _, _, _, _, _, _), + PINGROUP(107, NORTH, uim2_reset, qup13, qup_l6, _, _, _, _, _, _), + PINGROUP(108, NORTH, uim2_present, qup13, _, _, _, _, _, _, _), + PINGROUP(109, NORTH, uim1_data, _, _, _, _, _, _, _, _), + PINGROUP(110, NORTH, uim1_clk, _, _, _, _, _, _, _, _), + PINGROUP(111, NORTH, uim1_reset, _, _, _, _, _, _, _, _), + PINGROUP(112, NORTH, uim1_present, _, _, _, _, _, _, _, _), + PINGROUP(113, NORTH, uim_batt, edp_hot, _, _, _, _, _, _, _), + PINGROUP(114, WEST, _, nav_pps, nav_pps, gps_tx, _, _, _, _, _), + PINGROUP(115, WEST, _, nav_pps, nav_pps, gps_tx, _, _, _, _, _), + PINGROUP(116, SOUTH, _, _, _, _, _, _, _, _, _), + PINGROUP(117, NORTH, _, qdss, atest_char, _, _, _, _, _, _), + PINGROUP(118, NORTH, adsp_ext, _, qdss, atest_char, _, _, _, _, _), + PINGROUP(119, NORTH, _, qdss, atest_char, _, _, _, _, _, _), + PINGROUP(120, NORTH, _, qdss, atest_char, _, _, _, _, _, _), + PINGROUP(121, NORTH, _, qdss, atest_char, _, _, _, _, _, _), + PINGROUP(122, NORTH, _, qdss, _, _, _, _, _, _, _), + PINGROUP(123, NORTH, qup_l4, _, qdss, _, _, _, _, _, _), + PINGROUP(124, NORTH, qup_l5, _, qdss, _, _, _, _, _, _), + PINGROUP(125, NORTH, qup_l6, _, _, _, _, _, _, _, _), + PINGROUP(126, NORTH, _, _, _, _, _, _, _, _, _), + PINGROUP(127, WEST, _, _, _, _, _, _, _, _, _), + PINGROUP(128, WEST, nav_pps, nav_pps, gps_tx, _, _, _, _, _, _), + PINGROUP(129, WEST, nav_pps, nav_pps, gps_tx, _, _, _, _, _, _), + PINGROUP(130, WEST, qlink_request, _, _, _, _, _, _, _, _), + PINGROUP(131, WEST, qlink_enable, _, _, _, _, _, _, _, _), + PINGROUP(132, WEST, _, _, _, _, _, _, _, _, _), + PINGROUP(133, NORTH, _, _, _, _, _, _, _, _, _), + PINGROUP(134, NORTH, _, _, _, _, _, _, _, _, _), + PINGROUP(135, WEST, _, pa_indicator, _, _, _, _, _, _, _), + PINGROUP(136, WEST, _, _, _, _, _, _, _, _, _), + PINGROUP(137, WEST, _, _, phase_flag, _, _, _, _, _, _), + PINGROUP(138, WEST, _, _, phase_flag, _, _, _, _, _, _), + PINGROUP(139, WEST, _, phase_flag, _, _, _, _, _, _, _), + PINGROUP(140, WEST, _, _, phase_flag, _, _, _, _, _, _), + PINGROUP(141, WEST, _, phase_flag, _, _, _, _, _, _, _), + PINGROUP(142, WEST, _, phase_flag, _, _, _, _, _, _, _), + PINGROUP(143, WEST, _, nav_pps, nav_pps, gps_tx, phase_flag, _, _, _, _), + PINGROUP(144, SOUTH, mss_lte, _, _, _, _, _, _, _, _), + PINGROUP(145, SOUTH, mss_lte, gps_tx, _, _, _, _, _, _, _), + PINGROUP(146, WEST, _, _, _, _, _, _, _, _, _), + PINGROUP(147, WEST, _, _, _, _, _, _, _, _, _), + PINGROUP(148, WEST, _, _, _, _, _, _, _, _, _), + PINGROUP(149, WEST, _, _, _, _, _, _, _, _, _), + UFS_RESET(ufs_reset, 0x99d000), + SDC_QDSD_PINGROUP(sdc1_rclk, 0x99000, 15, 0), + SDC_QDSD_PINGROUP(sdc1_clk, 0x99000, 13, 6), + SDC_QDSD_PINGROUP(sdc1_cmd, 0x99000, 11, 3), + SDC_QDSD_PINGROUP(sdc1_data, 0x99000, 9, 0), + SDC_QDSD_PINGROUP(sdc2_clk, 0x9a000, 14, 6), + SDC_QDSD_PINGROUP(sdc2_cmd, 0x9a000, 11, 3), + SDC_QDSD_PINGROUP(sdc2_data, 0x9a000, 9, 0), +}; + +static const int sdm670_reserved_gpios[] = { + 58, 59, 60, 61, 62, 63, 64, 69, 70, 71, 72, 73, 74, 104, -1 +}; + +static const struct msm_pinctrl_soc_data sdm670_pinctrl = { + .pins = sdm670_pins, + .npins = ARRAY_SIZE(sdm670_pins), + .functions = sdm670_functions, + .nfunctions = ARRAY_SIZE(sdm670_functions), + .groups = sdm670_groups, + .ngroups = ARRAY_SIZE(sdm670_groups), + .ngpios = 151, + .reserved_gpios = sdm670_reserved_gpios, +}; + +static int sdm670_pinctrl_probe(struct platform_device *pdev) +{ + return msm_pinctrl_probe(pdev, &sdm670_pinctrl); +} + +static const struct of_device_id sdm670_pinctrl_of_match[] = { + { .compatible = "qcom,sdm670-tlmm", }, + { }, +}; +MODULE_DEVICE_TABLE(of, sdm670_pinctrl_of_match); + +static struct platform_driver sdm670_pinctrl_driver = { + .driver = { + .name = "sdm670-pinctrl", + .of_match_table = sdm670_pinctrl_of_match, + }, + .probe = sdm670_pinctrl_probe, + .remove = msm_pinctrl_remove, +}; + +static int __init sdm670_pinctrl_init(void) +{ + return platform_driver_register(&sdm670_pinctrl_driver); +} +arch_initcall(sdm670_pinctrl_init); + +static void __exit sdm670_pinctrl_exit(void) +{ + platform_driver_unregister(&sdm670_pinctrl_driver); +} +module_exit(sdm670_pinctrl_exit); + +MODULE_DESCRIPTION("Qualcomm SDM670 TLMM pinctrl driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c index 8c31a8f6b7e4ef..89695b5a2ce735 100644 --- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c +++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c @@ -9,15 +9,17 @@ #include <linux/module.h> #include <linux/of.h> #include <linux/of_irq.h> -#include <linux/pinctrl/pinconf-generic.h> -#include <linux/pinctrl/pinconf.h> -#include <linux/pinctrl/pinmux.h> #include <linux/platform_device.h> #include <linux/regmap.h> +#include <linux/seq_file.h> #include <linux/slab.h> #include <linux/spmi.h> #include <linux/types.h> +#include <linux/pinctrl/pinconf-generic.h> +#include <linux/pinctrl/pinconf.h> +#include <linux/pinctrl/pinmux.h> + #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include "../core.h" diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c index 6937157f50b3cf..063177b79927f5 100644 --- a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c +++ b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c @@ -7,14 +7,16 @@ #include <linux/module.h> #include <linux/of.h> #include <linux/of_irq.h> -#include <linux/pinctrl/pinconf-generic.h> -#include <linux/pinctrl/pinconf.h> -#include <linux/pinctrl/pinmux.h> #include <linux/platform_device.h> #include <linux/regmap.h> +#include <linux/seq_file.h> #include <linux/slab.h> #include <linux/types.h> +#include <linux/pinctrl/pinconf-generic.h> +#include <linux/pinctrl/pinconf.h> +#include <linux/pinctrl/pinmux.h> + #include <dt-bindings/pinctrl/qcom,pmic-mpp.h> #include "../core.h" diff --git a/drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c b/drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c index 1b41adda81295e..99314925bb1338 100644 --- a/drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c +++ b/drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c @@ -4,18 +4,20 @@ * Copyright (c) 2013, The Linux Foundation. All rights reserved. */ -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/pinctrl/pinctrl.h> -#include <linux/pinctrl/pinmux.h> -#include <linux/pinctrl/pinconf.h> -#include <linux/pinctrl/pinconf-generic.h> -#include <linux/slab.h> -#include <linux/regmap.h> #include <linux/gpio/driver.h> #include <linux/interrupt.h> +#include <linux/module.h> #include <linux/of_device.h> #include <linux/of_irq.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/seq_file.h> +#include <linux/slab.h> + +#include <linux/pinctrl/pinconf-generic.h> +#include <linux/pinctrl/pinconf.h> +#include <linux/pinctrl/pinctrl.h> +#include <linux/pinctrl/pinmux.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> @@ -534,7 +536,6 @@ static int pm8xxx_gpio_of_xlate(struct gpio_chip *chip, #ifdef CONFIG_DEBUG_FS -#include <linux/seq_file.h> static void pm8xxx_gpio_dbg_show_one(struct seq_file *s, struct pinctrl_dev *pctldev, diff --git a/drivers/pinctrl/qcom/pinctrl-ssbi-mpp.c b/drivers/pinctrl/qcom/pinctrl-ssbi-mpp.c index 49893a5133a85d..a46650db678a8d 100644 --- a/drivers/pinctrl/qcom/pinctrl-ssbi-mpp.c +++ b/drivers/pinctrl/qcom/pinctrl-ssbi-mpp.c @@ -4,18 +4,20 @@ * Copyright (c) 2013, The Linux Foundation. All rights reserved. */ -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/pinctrl/pinctrl.h> -#include <linux/pinctrl/pinmux.h> -#include <linux/pinctrl/pinconf.h> -#include <linux/pinctrl/pinconf-generic.h> -#include <linux/slab.h> -#include <linux/regmap.h> #include <linux/gpio/driver.h> #include <linux/interrupt.h> +#include <linux/module.h> #include <linux/of_device.h> #include <linux/of_irq.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/seq_file.h> +#include <linux/slab.h> + +#include <linux/pinctrl/pinconf-generic.h> +#include <linux/pinctrl/pinconf.h> +#include <linux/pinctrl/pinctrl.h> +#include <linux/pinctrl/pinmux.h> #include <dt-bindings/pinctrl/qcom,pmic-mpp.h> @@ -534,7 +536,6 @@ static int pm8xxx_mpp_of_xlate(struct gpio_chip *chip, #ifdef CONFIG_DEBUG_FS -#include <linux/seq_file.h> static void pm8xxx_mpp_dbg_show_one(struct seq_file *s, struct pinctrl_dev *pctldev, diff --git a/drivers/pinctrl/renesas/gpio.c b/drivers/pinctrl/renesas/gpio.c index ea3d38b4af8da4..5758daf94fe2e8 100644 --- a/drivers/pinctrl/renesas/gpio.c +++ b/drivers/pinctrl/renesas/gpio.c @@ -135,12 +135,12 @@ static int gpio_pin_request(struct gpio_chip *gc, unsigned offset) if (idx < 0 || pfc->info->pins[idx].enum_id == 0) return -EINVAL; - return pinctrl_gpio_request(offset); + return pinctrl_gpio_request(gc->base + offset); } static void gpio_pin_free(struct gpio_chip *gc, unsigned offset) { - return pinctrl_gpio_free(offset); + return pinctrl_gpio_free(gc->base + offset); } static void gpio_pin_set_value(struct sh_pfc_chip *chip, unsigned offset, @@ -164,7 +164,7 @@ static void gpio_pin_set_value(struct sh_pfc_chip *chip, unsigned offset, static int gpio_pin_direction_input(struct gpio_chip *gc, unsigned offset) { - return pinctrl_gpio_direction_input(offset); + return pinctrl_gpio_direction_input(gc->base + offset); } static int gpio_pin_direction_output(struct gpio_chip *gc, unsigned offset, @@ -172,7 +172,7 @@ static int gpio_pin_direction_output(struct gpio_chip *gc, unsigned offset, { gpio_pin_set_value(gpiochip_get_data(gc), offset, value); - return pinctrl_gpio_direction_output(offset); + return pinctrl_gpio_direction_output(gc->base + offset); } static int gpio_pin_get(struct gpio_chip *gc, unsigned offset) @@ -238,7 +238,7 @@ static int gpio_pin_setup(struct sh_pfc_chip *chip) gc->label = pfc->info->name; gc->parent = pfc->dev; gc->owner = THIS_MODULE; - gc->base = 0; + gc->base = IS_ENABLED(CONFIG_PINCTRL_SH_FUNC_GPIO) ? 0 : -1; gc->ngpio = pfc->nr_gpio_pins; return 0; diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.c b/drivers/pinctrl/renesas/pinctrl-rzg2l.c index a43824fd9505f4..5aa3836dbc226a 100644 --- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c +++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c @@ -8,16 +8,19 @@ #include <linux/bitops.h> #include <linux/clk.h> #include <linux/gpio/driver.h> -#include <linux/io.h> #include <linux/interrupt.h> +#include <linux/io.h> #include <linux/module.h> #include <linux/of_device.h> #include <linux/of_irq.h> +#include <linux/seq_file.h> +#include <linux/spinlock.h> + +#include <linux/pinctrl/consumer.h> #include <linux/pinctrl/pinconf-generic.h> #include <linux/pinctrl/pinconf.h> #include <linux/pinctrl/pinctrl.h> #include <linux/pinctrl/pinmux.h> -#include <linux/spinlock.h> #include <dt-bindings/pinctrl/rzg2l-pinctrl.h> @@ -435,8 +438,7 @@ static int rzg2l_dt_node_to_map(struct pinctrl_dev *pctldev, ret = -EINVAL; done: - if (ret < 0) - rzg2l_dt_free_map(pctldev, *map, *num_maps); + rzg2l_dt_free_map(pctldev, *map, *num_maps); return ret; } diff --git a/drivers/pinctrl/renesas/pinctrl-rzn1.c b/drivers/pinctrl/renesas/pinctrl-rzn1.c index 849d091205d4d5..9158c175749239 100644 --- a/drivers/pinctrl/renesas/pinctrl-rzn1.c +++ b/drivers/pinctrl/renesas/pinctrl-rzn1.c @@ -7,16 +7,20 @@ */ #include <dt-bindings/pinctrl/rzn1-pinctrl.h> + #include <linux/clk.h> #include <linux/device.h> #include <linux/io.h> #include <linux/module.h> #include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + #include <linux/pinctrl/pinconf-generic.h> +#include <linux/pinctrl/pinconf.h> #include <linux/pinctrl/pinctrl.h> #include <linux/pinctrl/pinmux.h> -#include <linux/platform_device.h> -#include <linux/slab.h> + #include "../core.h" #include "../pinconf.h" #include "../pinctrl-utils.h" diff --git a/drivers/pinctrl/renesas/pinctrl-rzv2m.c b/drivers/pinctrl/renesas/pinctrl-rzv2m.c index e8c18198bebd21..3b65a71abd9ac6 100644 --- a/drivers/pinctrl/renesas/pinctrl-rzv2m.c +++ b/drivers/pinctrl/renesas/pinctrl-rzv2m.c @@ -15,11 +15,13 @@ #include <linux/io.h> #include <linux/module.h> #include <linux/of_device.h> +#include <linux/spinlock.h> + +#include <linux/pinctrl/consumer.h> #include <linux/pinctrl/pinconf-generic.h> #include <linux/pinctrl/pinconf.h> #include <linux/pinctrl/pinctrl.h> #include <linux/pinctrl/pinmux.h> -#include <linux/spinlock.h> #include <dt-bindings/pinctrl/rzv2m-pinctrl.h> @@ -397,8 +399,7 @@ static int rzv2m_dt_node_to_map(struct pinctrl_dev *pctldev, ret = -EINVAL; done: - if (ret < 0) - rzv2m_dt_free_map(pctldev, *map, *num_maps); + rzv2m_dt_free_map(pctldev, *map, *num_maps); return ret; } diff --git a/drivers/pinctrl/renesas/pinctrl.c b/drivers/pinctrl/renesas/pinctrl.c index b438d24c13b5c9..b7414780031990 100644 --- a/drivers/pinctrl/renesas/pinctrl.c +++ b/drivers/pinctrl/renesas/pinctrl.c @@ -12,14 +12,16 @@ #include <linux/io.h> #include <linux/module.h> #include <linux/of.h> +#include <linux/seq_file.h> +#include <linux/slab.h> +#include <linux/spinlock.h> + #include <linux/pinctrl/consumer.h> #include <linux/pinctrl/machine.h> -#include <linux/pinctrl/pinconf.h> #include <linux/pinctrl/pinconf-generic.h> +#include <linux/pinctrl/pinconf.h> #include <linux/pinctrl/pinctrl.h> #include <linux/pinctrl/pinmux.h> -#include <linux/slab.h> -#include <linux/spinlock.h> #include "core.h" #include "../core.h" diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.c b/drivers/pinctrl/samsung/pinctrl-samsung.c index bd13b5ef246d8c..5736761927cbda 100644 --- a/drivers/pinctrl/samsung/pinctrl-samsung.c +++ b/drivers/pinctrl/samsung/pinctrl-samsung.c @@ -15,15 +15,16 @@ // but provides extensions to which platform specific implementation of the gpio // and wakeup interrupts can be hooked to. -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/property.h> -#include <linux/slab.h> #include <linux/err.h> #include <linux/gpio/driver.h> +#include <linux/init.h> +#include <linux/io.h> #include <linux/irqdomain.h> #include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/property.h> +#include <linux/seq_file.h> +#include <linux/slab.h> #include <linux/spinlock.h> #include "../core.h" diff --git a/drivers/pinctrl/spear/pinctrl-spear.c b/drivers/pinctrl/spear/pinctrl-spear.c index e0543c1ad641e8..18de2e70ea5035 100644 --- a/drivers/pinctrl/spear/pinctrl-spear.c +++ b/drivers/pinctrl/spear/pinctrl-spear.c @@ -19,11 +19,13 @@ #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_gpio.h> +#include <linux/platform_device.h> +#include <linux/seq_file.h> +#include <linux/slab.h> + #include <linux/pinctrl/machine.h> #include <linux/pinctrl/pinctrl.h> #include <linux/pinctrl/pinmux.h> -#include <linux/platform_device.h> -#include <linux/slab.h> #include "pinctrl-spear.h" diff --git a/drivers/pinctrl/sprd/pinctrl-sprd.c b/drivers/pinctrl/sprd/pinctrl-sprd.c index dca7a505d41377..ca9659f4e4b158 100644 --- a/drivers/pinctrl/sprd/pinctrl-sprd.c +++ b/drivers/pinctrl/sprd/pinctrl-sprd.c @@ -13,12 +13,15 @@ #include <linux/of.h> #include <linux/of_device.h> #include <linux/platform_device.h> +#include <linux/seq_file.h> +#include <linux/slab.h> + +#include <linux/pinctrl/consumer.h> #include <linux/pinctrl/machine.h> -#include <linux/pinctrl/pinconf.h> #include <linux/pinctrl/pinconf-generic.h> +#include <linux/pinctrl/pinconf.h> #include <linux/pinctrl/pinctrl.h> #include <linux/pinctrl/pinmux.h> -#include <linux/slab.h> #include "../core.h" #include "../pinmux.h" diff --git a/drivers/pinctrl/starfive/pinctrl-starfive-jh7100.c b/drivers/pinctrl/starfive/pinctrl-starfive-jh7100.c index 5b544fb7f3d882..530fe340a9a154 100644 --- a/drivers/pinctrl/starfive/pinctrl-starfive-jh7100.c +++ b/drivers/pinctrl/starfive/pinctrl-starfive-jh7100.c @@ -15,8 +15,11 @@ #include <linux/of.h> #include <linux/platform_device.h> #include <linux/reset.h> +#include <linux/seq_file.h> #include <linux/spinlock.h> +#include <linux/pinctrl/consumer.h> +#include <linux/pinctrl/pinconf.h> #include <linux/pinctrl/pinctrl.h> #include <linux/pinctrl/pinmux.h> @@ -1079,7 +1082,7 @@ static void starfive_irq_mask(struct irq_data *d) writel_relaxed(value, ie); raw_spin_unlock_irqrestore(&sfp->lock, flags); - gpiochip_disable_irq(&sfp->gc, d->hwirq); + gpiochip_disable_irq(&sfp->gc, gpio); } static void starfive_irq_mask_ack(struct irq_data *d) @@ -1108,7 +1111,7 @@ static void starfive_irq_unmask(struct irq_data *d) unsigned long flags; u32 value; - gpiochip_enable_irq(&sfp->gc, d->hwirq); + gpiochip_enable_irq(&sfp->gc, gpio); raw_spin_lock_irqsave(&sfp->lock, flags); value = readl_relaxed(ie) | mask; diff --git a/drivers/pinctrl/stm32/pinctrl-stm32.c b/drivers/pinctrl/stm32/pinctrl-stm32.c index e485506ea599c8..1cddca506ad7ea 100644 --- a/drivers/pinctrl/stm32/pinctrl-stm32.c +++ b/drivers/pinctrl/stm32/pinctrl-stm32.c @@ -13,22 +13,24 @@ #include <linux/irq.h> #include <linux/mfd/syscon.h> #include <linux/module.h> -#include <linux/of.h> #include <linux/of_address.h> #include <linux/of_device.h> +#include <linux/of.h> #include <linux/of_irq.h> -#include <linux/pinctrl/consumer.h> -#include <linux/pinctrl/machine.h> -#include <linux/pinctrl/pinconf.h> -#include <linux/pinctrl/pinconf-generic.h> -#include <linux/pinctrl/pinctrl.h> -#include <linux/pinctrl/pinmux.h> #include <linux/platform_device.h> #include <linux/property.h> #include <linux/regmap.h> #include <linux/reset.h> +#include <linux/seq_file.h> #include <linux/slab.h> +#include <linux/pinctrl/consumer.h> +#include <linux/pinctrl/machine.h> +#include <linux/pinctrl/pinconf-generic.h> +#include <linux/pinctrl/pinconf.h> +#include <linux/pinctrl/pinctrl.h> +#include <linux/pinctrl/pinmux.h> + #include "../core.h" #include "../pinconf.h" #include "../pinctrl-utils.h" @@ -1497,11 +1499,6 @@ int stm32_pctl_probe(struct platform_device *pdev) if (!match_data) return -EINVAL; - if (!device_property_present(dev, "pins-are-numbered")) { - dev_err(dev, "only support pins-are-numbered format\n"); - return -EINVAL; - } - pctl = devm_kzalloc(dev, sizeof(*pctl), GFP_KERNEL); if (!pctl) return -ENOMEM; diff --git a/drivers/pinctrl/sunxi/pinctrl-sun20i-d1.c b/drivers/pinctrl/sunxi/pinctrl-sun20i-d1.c index 40858b8812983b..9cc94be1046d37 100644 --- a/drivers/pinctrl/sunxi/pinctrl-sun20i-d1.c +++ b/drivers/pinctrl/sunxi/pinctrl-sun20i-d1.c @@ -47,6 +47,7 @@ static const struct sunxi_desc_pin d1_pins[] = { SUNXI_FUNCTION(0x5, "i2s2_din"), /* DIN2 */ SUNXI_FUNCTION(0x6, "lcd0"), /* D18 */ SUNXI_FUNCTION(0x7, "uart4"), /* TX */ + SUNXI_FUNCTION(0x8, "can0"), /* TX */ SUNXI_FUNCTION_IRQ_BANK(0xe, 0, 2)), SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 3), SUNXI_FUNCTION(0x0, "gpio_in"), @@ -57,6 +58,7 @@ static const struct sunxi_desc_pin d1_pins[] = { SUNXI_FUNCTION(0x5, "i2s2_din"), /* DIN0 */ SUNXI_FUNCTION(0x6, "lcd0"), /* D19 */ SUNXI_FUNCTION(0x7, "uart4"), /* RX */ + SUNXI_FUNCTION(0x8, "can0"), /* RX */ SUNXI_FUNCTION_IRQ_BANK(0xe, 0, 3)), SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 4), SUNXI_FUNCTION(0x0, "gpio_in"), @@ -67,6 +69,7 @@ static const struct sunxi_desc_pin d1_pins[] = { SUNXI_FUNCTION(0x5, "i2s2_din"), /* DIN1 */ SUNXI_FUNCTION(0x6, "lcd0"), /* D20 */ SUNXI_FUNCTION(0x7, "uart5"), /* TX */ + SUNXI_FUNCTION(0x8, "can1"), /* TX */ SUNXI_FUNCTION_IRQ_BANK(0xe, 0, 4)), SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 5), SUNXI_FUNCTION(0x0, "gpio_in"), @@ -77,6 +80,7 @@ static const struct sunxi_desc_pin d1_pins[] = { SUNXI_FUNCTION(0x5, "pwm0"), SUNXI_FUNCTION(0x6, "lcd0"), /* D21 */ SUNXI_FUNCTION(0x7, "uart5"), /* RX */ + SUNXI_FUNCTION(0x8, "can1"), /* RX */ SUNXI_FUNCTION_IRQ_BANK(0xe, 0, 5)), SUNXI_PIN(SUNXI_PINCTRL_PIN(B, 6), SUNXI_FUNCTION(0x0, "gpio_in"), diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.c b/drivers/pinctrl/sunxi/pinctrl-sunxi.c index 6c04027d0dd977..f35179eceb4e05 100644 --- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c +++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c @@ -10,26 +10,28 @@ * warranty of any kind, whether express or implied. */ -#include <linux/io.h> #include <linux/clk.h> +#include <linux/export.h> #include <linux/gpio/driver.h> #include <linux/interrupt.h> -#include <linux/irqdomain.h> +#include <linux/io.h> #include <linux/irqchip/chained_irq.h> -#include <linux/export.h> +#include <linux/irqdomain.h> #include <linux/of.h> -#include <linux/of_clk.h> #include <linux/of_address.h> +#include <linux/of_clk.h> #include <linux/of_device.h> #include <linux/of_irq.h> +#include <linux/platform_device.h> +#include <linux/regulator/consumer.h> +#include <linux/slab.h> + #include <linux/pinctrl/consumer.h> #include <linux/pinctrl/machine.h> -#include <linux/pinctrl/pinctrl.h> #include <linux/pinctrl/pinconf-generic.h> +#include <linux/pinctrl/pinconf.h> +#include <linux/pinctrl/pinctrl.h> #include <linux/pinctrl/pinmux.h> -#include <linux/regulator/consumer.h> -#include <linux/platform_device.h> -#include <linux/slab.h> #include <dt-bindings/pinctrl/sun4i-a10.h> diff --git a/drivers/pinctrl/tegra/pinctrl-tegra-xusb.c b/drivers/pinctrl/tegra/pinctrl-tegra-xusb.c index 43922ab8166643..7641848be4defd 100644 --- a/drivers/pinctrl/tegra/pinctrl-tegra-xusb.c +++ b/drivers/pinctrl/tegra/pinctrl-tegra-xusb.c @@ -8,12 +8,15 @@ #include <linux/module.h> #include <linux/of.h> #include <linux/phy/phy.h> -#include <linux/pinctrl/pinctrl.h> -#include <linux/pinctrl/pinmux.h> #include <linux/platform_device.h> #include <linux/reset.h> +#include <linux/seq_file.h> #include <linux/slab.h> +#include <linux/pinctrl/pinconf.h> +#include <linux/pinctrl/pinctrl.h> +#include <linux/pinctrl/pinmux.h> + #include <dt-bindings/pinctrl/pinctrl-tegra-xusb.h> #include "../core.h" diff --git a/drivers/pinctrl/tegra/pinctrl-tegra.c b/drivers/pinctrl/tegra/pinctrl-tegra.c index 50bd26a30ac0a3..1729b7ddfa946a 100644 --- a/drivers/pinctrl/tegra/pinctrl-tegra.c +++ b/drivers/pinctrl/tegra/pinctrl-tegra.c @@ -15,11 +15,13 @@ #include <linux/io.h> #include <linux/of.h> #include <linux/platform_device.h> +#include <linux/seq_file.h> +#include <linux/slab.h> + #include <linux/pinctrl/machine.h> +#include <linux/pinctrl/pinconf.h> #include <linux/pinctrl/pinctrl.h> #include <linux/pinctrl/pinmux.h> -#include <linux/pinctrl/pinconf.h> -#include <linux/slab.h> #include "../core.h" #include "../pinctrl-utils.h" @@ -668,19 +670,6 @@ static const struct pinconf_ops tegra_pinconf_ops = { #endif }; -static struct pinctrl_gpio_range tegra_pinctrl_gpio_range = { - .name = "Tegra GPIOs", - .id = 0, - .base = 0, -}; - -static struct pinctrl_desc tegra_pinctrl_desc = { - .pctlops = &tegra_pinctrl_ops, - .pmxops = &tegra_pinmux_ops, - .confops = &tegra_pinconf_ops, - .owner = THIS_MODULE, -}; - static void tegra_pinctrl_clear_parked_bits(struct tegra_pmx *pmx) { int i = 0; @@ -831,10 +820,18 @@ int tegra_pinctrl_probe(struct platform_device *pdev, } } - tegra_pinctrl_gpio_range.npins = pmx->soc->ngpios; - tegra_pinctrl_desc.name = dev_name(&pdev->dev); - tegra_pinctrl_desc.pins = pmx->soc->pins; - tegra_pinctrl_desc.npins = pmx->soc->npins; + pmx->gpio_range.name = "Tegra GPIOs"; + pmx->gpio_range.id = 0; + pmx->gpio_range.base = 0; + pmx->gpio_range.npins = pmx->soc->ngpios; + + pmx->desc.pctlops = &tegra_pinctrl_ops; + pmx->desc.pmxops = &tegra_pinmux_ops; + pmx->desc.confops = &tegra_pinconf_ops; + pmx->desc.owner = THIS_MODULE; + pmx->desc.name = dev_name(&pdev->dev); + pmx->desc.pins = pmx->soc->pins; + pmx->desc.npins = pmx->soc->npins; for (i = 0; ; i++) { res = platform_get_resource(pdev, IORESOURCE_MEM, i); @@ -860,7 +857,7 @@ int tegra_pinctrl_probe(struct platform_device *pdev, return PTR_ERR(pmx->regs[i]); } - pmx->pctl = devm_pinctrl_register(&pdev->dev, &tegra_pinctrl_desc, pmx); + pmx->pctl = devm_pinctrl_register(&pdev->dev, &pmx->desc, pmx); if (IS_ERR(pmx->pctl)) { dev_err(&pdev->dev, "Couldn't register pinctrl driver\n"); return PTR_ERR(pmx->pctl); @@ -869,7 +866,7 @@ int tegra_pinctrl_probe(struct platform_device *pdev, tegra_pinctrl_clear_parked_bits(pmx); if (pmx->soc->ngpios > 0 && !tegra_pinctrl_gpio_node_has_range(pmx)) - pinctrl_add_gpio_range(pmx->pctl, &tegra_pinctrl_gpio_range); + pinctrl_add_gpio_range(pmx->pctl, &pmx->gpio_range); platform_set_drvdata(pdev, pmx); diff --git a/drivers/pinctrl/tegra/pinctrl-tegra.h b/drivers/pinctrl/tegra/pinctrl-tegra.h index f8269858eb78a8..6130cba7cce548 100644 --- a/drivers/pinctrl/tegra/pinctrl-tegra.h +++ b/drivers/pinctrl/tegra/pinctrl-tegra.h @@ -15,6 +15,8 @@ struct tegra_pmx { const struct tegra_pinctrl_soc_data *soc; const char **group_pins; + struct pinctrl_gpio_range gpio_range; + struct pinctrl_desc desc; int nbanks; void __iomem **regs; u32 *backup_regs; diff --git a/drivers/pinctrl/tegra/pinctrl-tegra194.c b/drivers/pinctrl/tegra/pinctrl-tegra194.c index f6c5d5e6dbb683..277973c884344b 100644 --- a/drivers/pinctrl/tegra/pinctrl-tegra194.c +++ b/drivers/pinctrl/tegra/pinctrl-tegra194.c @@ -16,6 +16,7 @@ #include <linux/init.h> #include <linux/of.h> +#include <linux/of_device.h> #include <linux/platform_device.h> #include <linux/pinctrl/pinctrl.h> #include <linux/pinctrl/pinmux.h> @@ -23,7 +24,7 @@ #include "pinctrl-tegra.h" /* Define unique ID for each pins */ -enum pin_id { +enum { TEGRA_PIN_DAP6_SCLK_PA0, TEGRA_PIN_DAP6_DOUT_PA1, TEGRA_PIN_DAP6_DIN_PA2, @@ -189,6 +190,31 @@ enum pin_id { TEGRA_PIN_SPI1_MOSI_PZ5, TEGRA_PIN_SPI1_CS0_PZ6, TEGRA_PIN_SPI1_CS1_PZ7, + TEGRA_PIN_UFS0_REF_CLK_PFF0, + TEGRA_PIN_UFS0_RST_PFF1, + TEGRA_PIN_PEX_L5_CLKREQ_N_PGG0, + TEGRA_PIN_PEX_L5_RST_N_PGG1, + TEGRA_PIN_DIRECTDC_COMP, + TEGRA_PIN_SDMMC4_CLK, + TEGRA_PIN_SDMMC4_CMD, + TEGRA_PIN_SDMMC4_DQS, + TEGRA_PIN_SDMMC4_DAT7, + TEGRA_PIN_SDMMC4_DAT6, + TEGRA_PIN_SDMMC4_DAT5, + TEGRA_PIN_SDMMC4_DAT4, + TEGRA_PIN_SDMMC4_DAT3, + TEGRA_PIN_SDMMC4_DAT2, + TEGRA_PIN_SDMMC4_DAT1, + TEGRA_PIN_SDMMC4_DAT0, + TEGRA_PIN_SDMMC1_COMP, + TEGRA_PIN_SDMMC1_HV_TRIM, + TEGRA_PIN_SDMMC3_COMP, + TEGRA_PIN_SDMMC3_HV_TRIM, + TEGRA_PIN_EQOS_COMP, + TEGRA_PIN_QSPI_COMP, +}; + +enum { TEGRA_PIN_CAN1_DOUT_PAA0, TEGRA_PIN_CAN1_DIN_PAA1, TEGRA_PIN_CAN0_DOUT_PAA2, @@ -219,28 +245,6 @@ enum pin_id { TEGRA_PIN_POWER_ON_PEE4, TEGRA_PIN_PWR_I2C_SCL_PEE5, TEGRA_PIN_PWR_I2C_SDA_PEE6, - TEGRA_PIN_UFS0_REF_CLK_PFF0, - TEGRA_PIN_UFS0_RST_PFF1, - TEGRA_PIN_PEX_L5_CLKREQ_N_PGG0, - TEGRA_PIN_PEX_L5_RST_N_PGG1, - TEGRA_PIN_DIRECTDC_COMP, - TEGRA_PIN_SDMMC4_CLK, - TEGRA_PIN_SDMMC4_CMD, - TEGRA_PIN_SDMMC4_DQS, - TEGRA_PIN_SDMMC4_DAT7, - TEGRA_PIN_SDMMC4_DAT6, - TEGRA_PIN_SDMMC4_DAT5, - TEGRA_PIN_SDMMC4_DAT4, - TEGRA_PIN_SDMMC4_DAT3, - TEGRA_PIN_SDMMC4_DAT2, - TEGRA_PIN_SDMMC4_DAT1, - TEGRA_PIN_SDMMC4_DAT0, - TEGRA_PIN_SDMMC1_COMP, - TEGRA_PIN_SDMMC1_HV_TRIM, - TEGRA_PIN_SDMMC3_COMP, - TEGRA_PIN_SDMMC3_HV_TRIM, - TEGRA_PIN_EQOS_COMP, - TEGRA_PIN_QSPI_COMP, TEGRA_PIN_SYS_RESET_N, TEGRA_PIN_SHUTDOWN_N, TEGRA_PIN_PMU_INT_N, @@ -415,36 +419,6 @@ static const struct pinctrl_pin_desc tegra194_pins[] = { PINCTRL_PIN(TEGRA_PIN_SPI1_MOSI_PZ5, "SPI1_MOSI_PZ5"), PINCTRL_PIN(TEGRA_PIN_SPI1_CS0_PZ6, "SPI1_CS0_PZ6"), PINCTRL_PIN(TEGRA_PIN_SPI1_CS1_PZ7, "SPI1_CS1_PZ7"), - PINCTRL_PIN(TEGRA_PIN_CAN1_DOUT_PAA0, "CAN1_DOUT_PAA0"), - PINCTRL_PIN(TEGRA_PIN_CAN1_DIN_PAA1, "CAN1_DIN_PAA1"), - PINCTRL_PIN(TEGRA_PIN_CAN0_DOUT_PAA2, "CAN0_DOUT_PAA2"), - PINCTRL_PIN(TEGRA_PIN_CAN0_DIN_PAA3, "CAN0_DIN_PAA3"), - PINCTRL_PIN(TEGRA_PIN_CAN0_STB_PAA4, "CAN0_STB_PAA4"), - PINCTRL_PIN(TEGRA_PIN_CAN0_EN_PAA5, "CAN0_EN_PAA5"), - PINCTRL_PIN(TEGRA_PIN_CAN0_WAKE_PAA6, "CAN0_WAKE_PAA6"), - PINCTRL_PIN(TEGRA_PIN_CAN0_ERR_PAA7, "CAN0_ERR_PAA7"), - PINCTRL_PIN(TEGRA_PIN_CAN1_STB_PBB0, "CAN1_STB_PBB0"), - PINCTRL_PIN(TEGRA_PIN_CAN1_EN_PBB1, "CAN1_EN_PBB1"), - PINCTRL_PIN(TEGRA_PIN_CAN1_WAKE_PBB2, "CAN1_WAKE_PBB2"), - PINCTRL_PIN(TEGRA_PIN_CAN1_ERR_PBB3, "CAN1_ERR_PBB3"), - PINCTRL_PIN(TEGRA_PIN_SPI2_SCK_PCC0, "SPI2_SCK_PCC0"), - PINCTRL_PIN(TEGRA_PIN_SPI2_MISO_PCC1, "SPI2_MISO_PCC1"), - PINCTRL_PIN(TEGRA_PIN_SPI2_MOSI_PCC2, "SPI2_MOSI_PCC2"), - PINCTRL_PIN(TEGRA_PIN_SPI2_CS0_PCC3, "SPI2_CS0_PCC3"), - PINCTRL_PIN(TEGRA_PIN_TOUCH_CLK_PCC4, "TOUCH_CLK_PCC4"), - PINCTRL_PIN(TEGRA_PIN_UART3_TX_PCC5, "UART3_TX_PCC5"), - PINCTRL_PIN(TEGRA_PIN_UART3_RX_PCC6, "UART3_RX_PCC6"), - PINCTRL_PIN(TEGRA_PIN_GEN2_I2C_SCL_PCC7, "GEN2_I2C_SCL_PCC7"), - PINCTRL_PIN(TEGRA_PIN_GEN2_I2C_SDA_PDD0, "GEN2_I2C_SDA_PDD0"), - PINCTRL_PIN(TEGRA_PIN_GEN8_I2C_SCL_PDD1, "GEN8_I2C_SCL_PDD1"), - PINCTRL_PIN(TEGRA_PIN_GEN8_I2C_SDA_PDD2, "GEN8_I2C_SDA_PDD2"), - PINCTRL_PIN(TEGRA_PIN_SAFE_STATE_PEE0, "SAFE_STATE_PEE0"), - PINCTRL_PIN(TEGRA_PIN_VCOMP_ALERT_PEE1, "VCOMP_ALERT_PEE1"), - PINCTRL_PIN(TEGRA_PIN_AO_RETENTION_N_PEE2, "AO_RETENTION_N_PEE2"), - PINCTRL_PIN(TEGRA_PIN_BATT_OC_PEE3, "BATT_OC_PEE3"), - PINCTRL_PIN(TEGRA_PIN_POWER_ON_PEE4, "POWER_ON_PEE4"), - PINCTRL_PIN(TEGRA_PIN_PWR_I2C_SCL_PEE5, "PWR_I2C_SCL_PEE5"), - PINCTRL_PIN(TEGRA_PIN_PWR_I2C_SDA_PEE6, "PWR_I2C_SDA_PEE6"), PINCTRL_PIN(TEGRA_PIN_UFS0_REF_CLK_PFF0, "UFS0_REF_CLK_PFF0"), PINCTRL_PIN(TEGRA_PIN_UFS0_RST_PFF1, "UFS0_RST_PFF1"), PINCTRL_PIN(TEGRA_PIN_PEX_L5_CLKREQ_N_PGG0, "PEX_L5_CLKREQ_N_PGG0"), @@ -467,11 +441,6 @@ static const struct pinctrl_pin_desc tegra194_pins[] = { PINCTRL_PIN(TEGRA_PIN_SDMMC3_HV_TRIM, "SDMMC3_HV_TRIM"), PINCTRL_PIN(TEGRA_PIN_EQOS_COMP, "EQOS_COMP"), PINCTRL_PIN(TEGRA_PIN_QSPI_COMP, "QSPI_COMP"), - PINCTRL_PIN(TEGRA_PIN_SYS_RESET_N, "SYS_RESET_N"), - PINCTRL_PIN(TEGRA_PIN_SHUTDOWN_N, "SHUTDOWN_N"), - PINCTRL_PIN(TEGRA_PIN_PMU_INT_N, "PMU_INT_N"), - PINCTRL_PIN(TEGRA_PIN_SOC_PWR_REQ, "SOC_PWR_REQ"), - PINCTRL_PIN(TEGRA_PIN_CLK_32K_IN, "CLK_32K_IN"), }; static const unsigned int dap6_sclk_pa0_pins[] = { @@ -1379,29 +1348,7 @@ static struct tegra_function tegra194_functions[] = { .drvtype_bit = 13, \ .lpdr_bit = e_lpdr, \ -#define drive_touch_clk_pcc4 DRV_PINGROUP_ENTRY_Y(0x2004, 12, 5, 20, 5, -1, -1, -1, -1, 1) -#define drive_uart3_rx_pcc6 DRV_PINGROUP_ENTRY_Y(0x200c, 12, 5, 20, 5, -1, -1, -1, -1, 1) -#define drive_uart3_tx_pcc5 DRV_PINGROUP_ENTRY_Y(0x2014, 12, 5, 20, 5, -1, -1, -1, -1, 1) -#define drive_gen8_i2c_sda_pdd2 DRV_PINGROUP_ENTRY_Y(0x201c, 12, 5, 20, 5, -1, -1, -1, -1, 1) -#define drive_gen8_i2c_scl_pdd1 DRV_PINGROUP_ENTRY_Y(0x2024, 12, 5, 20, 5, -1, -1, -1, -1, 1) -#define drive_spi2_mosi_pcc2 DRV_PINGROUP_ENTRY_Y(0x202c, 12, 5, 20, 5, -1, -1, -1, -1, 1) -#define drive_gen2_i2c_scl_pcc7 DRV_PINGROUP_ENTRY_Y(0x2034, 12, 5, 20, 5, -1, -1, -1, -1, 1) -#define drive_spi2_cs0_pcc3 DRV_PINGROUP_ENTRY_Y(0x203c, 12, 5, 20, 5, -1, -1, -1, -1, 1) -#define drive_gen2_i2c_sda_pdd0 DRV_PINGROUP_ENTRY_Y(0x2044, 12, 5, 20, 5, -1, -1, -1, -1, 1) -#define drive_spi2_sck_pcc0 DRV_PINGROUP_ENTRY_Y(0x204c, 12, 5, 20, 5, -1, -1, -1, -1, 1) -#define drive_spi2_miso_pcc1 DRV_PINGROUP_ENTRY_Y(0x2054, 12, 5, 20, 5, -1, -1, -1, -1, 1) -#define drive_can1_dout_paa0 DRV_PINGROUP_ENTRY_Y(0x3004, 28, 2, 30, 2, -1, -1, -1, -1, 1) -#define drive_can1_din_paa1 DRV_PINGROUP_ENTRY_Y(0x300c, 28, 2, 30, 2, -1, -1, -1, -1, 1) -#define drive_can0_dout_paa2 DRV_PINGROUP_ENTRY_Y(0x3014, 28, 2, 30, 2, -1, -1, -1, -1, 1) -#define drive_can0_din_paa3 DRV_PINGROUP_ENTRY_Y(0x301c, 28, 2, 30, 2, -1, -1, -1, -1, 1) -#define drive_can0_stb_paa4 DRV_PINGROUP_ENTRY_Y(0x3024, 28, 2, 30, 2, -1, -1, -1, -1, 1) -#define drive_can0_en_paa5 DRV_PINGROUP_ENTRY_Y(0x302c, 28, 2, 30, 2, -1, -1, -1, -1, 1) -#define drive_can0_wake_paa6 DRV_PINGROUP_ENTRY_Y(0x3034, 28, 2, 30, 2, -1, -1, -1, -1, 1) -#define drive_can0_err_paa7 DRV_PINGROUP_ENTRY_Y(0x303c, 28, 2, 30, 2, -1, -1, -1, -1, 1) -#define drive_can1_stb_pbb0 DRV_PINGROUP_ENTRY_Y(0x3044, 28, 2, 30, 2, -1, -1, -1, -1, 1) -#define drive_can1_en_pbb1 DRV_PINGROUP_ENTRY_Y(0x304c, 28, 2, 30, 2, -1, -1, -1, -1, 1) -#define drive_can1_wake_pbb2 DRV_PINGROUP_ENTRY_Y(0x3054, 28, 2, 30, 2, -1, -1, -1, -1, 1) -#define drive_can1_err_pbb3 DRV_PINGROUP_ENTRY_Y(0x305c, 28, 2, 30, 2, -1, -1, -1, -1, 1) +/* main drive pin groups */ #define drive_soc_gpio33_pt0 DRV_PINGROUP_ENTRY_Y(0x1004, 12, 5, 20, 5, -1, -1, -1, -1, 0) #define drive_soc_gpio32_ps7 DRV_PINGROUP_ENTRY_Y(0x100c, 12, 5, 20, 5, -1, -1, -1, -1, 0) #define drive_soc_gpio31_ps6 DRV_PINGROUP_ENTRY_Y(0x1014, 12, 5, 20, 5, -1, -1, -1, -1, 0) @@ -1509,17 +1456,6 @@ static struct tegra_function tegra194_functions[] = { #define drive_sdmmc3_dat0_po2 DRV_PINGROUP_ENTRY_Y(0xa01c, -1, -1, -1, -1, 28, 2, 30, 2, 0) #define drive_sdmmc3_cmd_po1 DRV_PINGROUP_ENTRY_Y(0xa02c, -1, -1, -1, -1, 28, 2, 30, 2, 0) #define drive_sdmmc3_clk_po0 DRV_PINGROUP_ENTRY_Y(0xa034, -1, -1, -1, -1, 28, 2, 30, 2, 0) -#define drive_shutdown_n DRV_PINGROUP_ENTRY_Y(0x1004, 12, 5, 20, 5, -1, -1, -1, -1, 1) -#define drive_pmu_int_n DRV_PINGROUP_ENTRY_Y(0x100c, 12, 5, 20, 5, -1, -1, -1, -1, 1) -#define drive_safe_state_pee0 DRV_PINGROUP_ENTRY_Y(0x1014, 12, 5, 20, 5, -1, -1, -1, -1, 1) -#define drive_vcomp_alert_pee1 DRV_PINGROUP_ENTRY_Y(0x101c, 12, 5, 20, 5, -1, -1, -1, -1, 1) -#define drive_soc_pwr_req DRV_PINGROUP_ENTRY_Y(0x1024, 12, 5, 20, 5, -1, -1, -1, -1, 1) -#define drive_batt_oc_pee3 DRV_PINGROUP_ENTRY_Y(0x102c, 12, 5, 20, 5, -1, -1, -1, -1, 1) -#define drive_clk_32k_in DRV_PINGROUP_ENTRY_Y(0x1034, 12, 5, 20, 5, -1, -1, -1, -1, 1) -#define drive_power_on_pee4 DRV_PINGROUP_ENTRY_Y(0x103c, 12, 5, 20, 5, -1, -1, -1, -1, 1) -#define drive_pwr_i2c_scl_pee5 DRV_PINGROUP_ENTRY_Y(0x1044, 12, 5, 20, 5, -1, -1, -1, -1, 1) -#define drive_pwr_i2c_sda_pee6 DRV_PINGROUP_ENTRY_Y(0x104c, 12, 5, 20, 5, -1, -1, -1, -1, 1) -#define drive_ao_retention_n_pee2 DRV_PINGROUP_ENTRY_Y(0x1064, 12, 5, 20, 5, -1, -1, -1, -1, 1) #define drive_gpu_pwr_req_px0 DRV_PINGROUP_ENTRY_Y(0xD004, 12, 5, 20, 5, -1, -1, -1, -1, 0) #define drive_spi3_miso_py1 DRV_PINGROUP_ENTRY_Y(0xD00c, 12, 5, 20, 5, -1, -1, -1, -1, 0) #define drive_spi1_cs0_pz6 DRV_PINGROUP_ENTRY_Y(0xD014, 12, 5, 20, 5, -1, -1, -1, -1, 0) @@ -1600,6 +1536,42 @@ static struct tegra_function tegra194_functions[] = { #define drive_directdc1_in_pv1 DRV_PINGROUP_ENTRY_N(no_entry) #define drive_directdc1_clk_pv0 DRV_PINGROUP_ENTRY_N(no_entry) +/* AON drive pin groups */ +#define drive_shutdown_n DRV_PINGROUP_ENTRY_Y(0x1004, 12, 5, 20, 5, -1, -1, -1, -1, 0) +#define drive_pmu_int_n DRV_PINGROUP_ENTRY_Y(0x100c, 12, 5, 20, 5, -1, -1, -1, -1, 0) +#define drive_safe_state_pee0 DRV_PINGROUP_ENTRY_Y(0x1014, 12, 5, 20, 5, -1, -1, -1, -1, 0) +#define drive_vcomp_alert_pee1 DRV_PINGROUP_ENTRY_Y(0x101c, 12, 5, 20, 5, -1, -1, -1, -1, 0) +#define drive_soc_pwr_req DRV_PINGROUP_ENTRY_Y(0x1024, 12, 5, 20, 5, -1, -1, -1, -1, 0) +#define drive_batt_oc_pee3 DRV_PINGROUP_ENTRY_Y(0x102c, 12, 5, 20, 5, -1, -1, -1, -1, 0) +#define drive_clk_32k_in DRV_PINGROUP_ENTRY_Y(0x1034, 12, 5, 20, 5, -1, -1, -1, -1, 0) +#define drive_power_on_pee4 DRV_PINGROUP_ENTRY_Y(0x103c, 12, 5, 20, 5, -1, -1, -1, -1, 0) +#define drive_pwr_i2c_scl_pee5 DRV_PINGROUP_ENTRY_Y(0x1044, 12, 5, 20, 5, -1, -1, -1, -1, 0) +#define drive_pwr_i2c_sda_pee6 DRV_PINGROUP_ENTRY_Y(0x104c, 12, 5, 20, 5, -1, -1, -1, -1, 0) +#define drive_ao_retention_n_pee2 DRV_PINGROUP_ENTRY_Y(0x1064, 12, 5, 20, 5, -1, -1, -1, -1, 0) +#define drive_touch_clk_pcc4 DRV_PINGROUP_ENTRY_Y(0x2004, 12, 5, 20, 5, -1, -1, -1, -1, 0) +#define drive_uart3_rx_pcc6 DRV_PINGROUP_ENTRY_Y(0x200c, 12, 5, 20, 5, -1, -1, -1, -1, 0) +#define drive_uart3_tx_pcc5 DRV_PINGROUP_ENTRY_Y(0x2014, 12, 5, 20, 5, -1, -1, -1, -1, 0) +#define drive_gen8_i2c_sda_pdd2 DRV_PINGROUP_ENTRY_Y(0x201c, 12, 5, 20, 5, -1, -1, -1, -1, 0) +#define drive_gen8_i2c_scl_pdd1 DRV_PINGROUP_ENTRY_Y(0x2024, 12, 5, 20, 5, -1, -1, -1, -1, 0) +#define drive_spi2_mosi_pcc2 DRV_PINGROUP_ENTRY_Y(0x202c, 12, 5, 20, 5, -1, -1, -1, -1, 0) +#define drive_gen2_i2c_scl_pcc7 DRV_PINGROUP_ENTRY_Y(0x2034, 12, 5, 20, 5, -1, -1, -1, -1, 0) +#define drive_spi2_cs0_pcc3 DRV_PINGROUP_ENTRY_Y(0x203c, 12, 5, 20, 5, -1, -1, -1, -1, 0) +#define drive_gen2_i2c_sda_pdd0 DRV_PINGROUP_ENTRY_Y(0x2044, 12, 5, 20, 5, -1, -1, -1, -1, 0) +#define drive_spi2_sck_pcc0 DRV_PINGROUP_ENTRY_Y(0x204c, 12, 5, 20, 5, -1, -1, -1, -1, 0) +#define drive_spi2_miso_pcc1 DRV_PINGROUP_ENTRY_Y(0x2054, 12, 5, 20, 5, -1, -1, -1, -1, 0) +#define drive_can1_dout_paa0 DRV_PINGROUP_ENTRY_Y(0x3004, 28, 2, 30, 2, -1, -1, -1, -1, 0) +#define drive_can1_din_paa1 DRV_PINGROUP_ENTRY_Y(0x300c, 28, 2, 30, 2, -1, -1, -1, -1, 0) +#define drive_can0_dout_paa2 DRV_PINGROUP_ENTRY_Y(0x3014, 28, 2, 30, 2, -1, -1, -1, -1, 0) +#define drive_can0_din_paa3 DRV_PINGROUP_ENTRY_Y(0x301c, 28, 2, 30, 2, -1, -1, -1, -1, 0) +#define drive_can0_stb_paa4 DRV_PINGROUP_ENTRY_Y(0x3024, 28, 2, 30, 2, -1, -1, -1, -1, 0) +#define drive_can0_en_paa5 DRV_PINGROUP_ENTRY_Y(0x302c, 28, 2, 30, 2, -1, -1, -1, -1, 0) +#define drive_can0_wake_paa6 DRV_PINGROUP_ENTRY_Y(0x3034, 28, 2, 30, 2, -1, -1, -1, -1, 0) +#define drive_can0_err_paa7 DRV_PINGROUP_ENTRY_Y(0x303c, 28, 2, 30, 2, -1, -1, -1, -1, 0) +#define drive_can1_stb_pbb0 DRV_PINGROUP_ENTRY_Y(0x3044, 28, 2, 30, 2, -1, -1, -1, -1, 0) +#define drive_can1_en_pbb1 DRV_PINGROUP_ENTRY_Y(0x304c, 28, 2, 30, 2, -1, -1, -1, -1, 0) +#define drive_can1_wake_pbb2 DRV_PINGROUP_ENTRY_Y(0x3054, 28, 2, 30, 2, -1, -1, -1, -1, 0) +#define drive_can1_err_pbb3 DRV_PINGROUP_ENTRY_Y(0x305c, 28, 2, 30, 2, -1, -1, -1, -1, 0) + #define PINGROUP(pg_name, f0, f1, f2, f3, r, bank, pupd, e_io_hv, e_lpbk, e_input, e_lpdr, e_pbias_buf, \ gpio_sfio_sel, e_od, schmitt_b, drvtype, epreemp, io_reset, rfu_in, io_rail) \ { \ @@ -1622,30 +1594,6 @@ static struct tegra_function tegra194_functions[] = { } static const struct tegra_pingroup tegra194_groups[] = { - - PINGROUP(touch_clk_pcc4, GP, TOUCH, RSVD2, RSVD3, 0x2000, 1, Y, -1, -1, 6, 8, -1, 10, 11, 12, N, -1, -1, N, "vddio_ao"), - PINGROUP(uart3_rx_pcc6, UARTC, RSVD1, RSVD2, RSVD3, 0x2008, 1, Y, 5, -1, 6, 8, -1, 10, 11, 12, N, -1, -1, N, "vddio_ao"), - PINGROUP(uart3_tx_pcc5, UARTC, RSVD1, RSVD2, RSVD3, 0x2010, 1, Y, 5, -1, 6, 8, -1, 10, 11, 12, N, -1, -1, N, "vddio_ao"), - PINGROUP(gen8_i2c_sda_pdd2, I2C8, RSVD1, RSVD2, RSVD3, 0x2018, 1, Y, 5, -1, 6, 8, -1, 10, 11, 12, N, -1, -1, N, "vddio_ao"), - PINGROUP(gen8_i2c_scl_pdd1, I2C8, RSVD1, RSVD2, RSVD3, 0x2020, 1, Y, 5, -1, 6, 8, -1, 10, 11, 12, N, -1, -1, N, "vddio_ao"), - PINGROUP(spi2_mosi_pcc2, SPI2, UARTG, RSVD2, RSVD3, 0x2028, 1, Y, 5, -1, 6, 8, -1, 10, 11, 12, N, -1, -1, N, "vddio_ao"), - PINGROUP(gen2_i2c_scl_pcc7, I2C2, RSVD1, RSVD2, RSVD3, 0x2030, 1, Y, 5, -1, 6, 8, -1, 10, 11, 12, N, -1, -1, N, "vddio_ao"), - PINGROUP(spi2_cs0_pcc3, SPI2, UARTG, RSVD2, RSVD3, 0x2038, 1, Y, 5, -1, 6, 8, -1, 10, 11, 12, N, -1, -1, N, "vddio_ao"), - PINGROUP(gen2_i2c_sda_pdd0, I2C2, RSVD1, RSVD2, RSVD3, 0x2040, 1, Y, 5, -1, 6, 8, -1, 10, 11, 12, N, -1, -1, N, "vddio_ao"), - PINGROUP(spi2_sck_pcc0, SPI2, UARTG, RSVD2, RSVD3, 0x2048, 1, Y, 5, -1, 6, 8, -1, 10, 11, 12, N, -1, -1, N, "vddio_ao"), - PINGROUP(spi2_miso_pcc1, SPI2, UARTG, RSVD2, RSVD3, 0x2050, 1, Y, 5, -1, 6, 8, -1, 10, 11, 12, N, -1, -1, N, "vddio_ao"), - PINGROUP(can1_dout_paa0, CAN1, RSVD1, RSVD2, RSVD3, 0x3000, 1, Y, -1, -1, 6, -1, 9, 10, -1, 12, Y, -1, -1, Y, "vddio_ao_hv"), - PINGROUP(can1_din_paa1, CAN1, RSVD1, RSVD2, RSVD3, 0x3008, 1, Y, -1, -1, 6, -1, 9, 10, -1, 12, Y, -1, -1, Y, "vddio_ao_hv"), - PINGROUP(can0_dout_paa2, CAN0, RSVD1, RSVD2, RSVD3, 0x3010, 1, Y, -1, -1, 6, -1, 9, 10, -1, 12, Y, -1, -1, Y, "vddio_ao_hv"), - PINGROUP(can0_din_paa3, CAN0, RSVD1, RSVD2, RSVD3, 0x3018, 1, Y, -1, -1, 6, -1, 9, 10, -1, 12, Y, -1, -1, Y, "vddio_ao_hv"), - PINGROUP(can0_stb_paa4, RSVD0, WDT, RSVD2, RSVD3, 0x3020, 1, Y, -1, -1, 6, -1, 9, 10, -1, 12, Y, -1, -1, Y, "vddio_ao_hv"), - PINGROUP(can0_en_paa5, RSVD0, RSVD1, RSVD2, RSVD3, 0x3028, 1, Y, -1, -1, 6, -1, 9, 10, -1, 12, Y, -1, -1, Y, "vddio_ao_hv"), - PINGROUP(can0_wake_paa6, RSVD0, RSVD1, RSVD2, RSVD3, 0x3030, 1, Y, -1, -1, 6, -1, 9, 10, -1, 12, Y, -1, -1, Y, "vddio_ao_hv"), - PINGROUP(can0_err_paa7, RSVD0, RSVD1, RSVD2, RSVD3, 0x3038, 1, Y, -1, -1, 6, -1, 9, 10, -1, 12, Y, -1, -1, Y, "vddio_ao_hv"), - PINGROUP(can1_stb_pbb0, RSVD0, DMIC3, DMIC5, RSVD3, 0x3040, 1, Y, -1, -1, 6, -1, 9, 10, -1, 12, Y, -1, -1, Y, "vddio_ao_hv"), - PINGROUP(can1_en_pbb1, RSVD0, DMIC3, DMIC5, RSVD3, 0x3048, 1, Y, -1, -1, 6, -1, 9, 10, -1, 12, Y, -1, -1, Y, "vddio_ao_hv"), - PINGROUP(can1_wake_pbb2, RSVD0, RSVD1, RSVD2, RSVD3, 0x3050, 1, Y, -1, -1, 6, -1, 9, 10, -1, 12, Y, -1, -1, Y, "vddio_ao_hv"), - PINGROUP(can1_err_pbb3, RSVD0, RSVD1, RSVD2, RSVD3, 0x3058, 1, Y, -1, -1, 6, -1, 9, 10, -1, 12, Y, -1, -1, Y, "vddio_ao_hv"), PINGROUP(soc_gpio33_pt0, RSVD0, SPDIF, RSVD2, RSVD3, 0x1000, 0, Y, -1, -1, 6, 8, -1, 10, 11, 12, N, -1, -1, N, "vddio_audio"), PINGROUP(soc_gpio32_ps7, RSVD0, SPDIF, RSVD2, RSVD3, 0x1008, 0, Y, -1, -1, 6, 8, -1, 10, 11, 12, N, -1, -1, N, "vddio_audio"), PINGROUP(soc_gpio31_ps6, RSVD0, SDMMC1, RSVD2, RSVD3, 0x1010, 0, Y, -1, -1, 6, 8, -1, 10, 11, 12, N, -1, -1, N, "vddio_audio"), @@ -1805,17 +1753,6 @@ static const struct tegra_pingroup tegra194_groups[] = { PINGROUP(sdmmc4_dat2, SDMMC4, RSVD1, RSVD2, RSVD3, 0x6048, 0, Y, -1, -1, 6, -1, -1, -1, -1, -1, Y, -1, -1, N, "vddio_sdmmc4"), PINGROUP(sdmmc4_dat1, SDMMC4, RSVD1, RSVD2, RSVD3, 0x6050, 0, Y, -1, -1, 6, -1, -1, -1, -1, -1, Y, -1, -1, N, "vddio_sdmmc4"), PINGROUP(sdmmc4_dat0, SDMMC4, RSVD1, RSVD2, RSVD3, 0x6058, 0, Y, -1, -1, 6, -1, -1, -1, -1, -1, Y, -1, -1, N, "vddio_sdmmc4"), - PINGROUP(shutdown_n, RSVD0, RSVD1, RSVD2, RSVD3, 0x1000, 1, Y, 5, -1, 6, 8, -1, -1, -1, 12, N, -1, -1, N, "vddio_sys"), - PINGROUP(pmu_int_n, RSVD0, RSVD1, RSVD2, RSVD3, 0x1008, 1, Y, -1, -1, 6, 8, -1, -1, -1, 12, N, -1, -1, N, "vddio_sys"), - PINGROUP(safe_state_pee0, SCE, RSVD1, RSVD2, RSVD3, 0x1010, 1, Y, 5, -1, 6, 8, -1, 10, 11, 12, N, -1, -1, N, "vddio_sys"), - PINGROUP(vcomp_alert_pee1, SOC, RSVD1, RSVD2, RSVD3, 0x1018, 1, Y, -1, -1, 6, 8, -1, 10, 11, 12, N, -1, -1, N, "vddio_sys"), - PINGROUP(soc_pwr_req, RSVD0, RSVD1, RSVD2, RSVD3, 0x1020, 1, Y, -1, -1, 6, 8, -1, -1, -1, 12, N, -1, -1, N, "vddio_sys"), - PINGROUP(batt_oc_pee3, SOC, RSVD1, RSVD2, RSVD3, 0x1028, 1, Y, -1, -1, 6, 8, -1, 10, 11, 12, N, -1, -1, N, "vddio_sys"), - PINGROUP(clk_32k_in, RSVD0, RSVD1, RSVD2, RSVD3, 0x1030, 1, Y, -1, -1, -1, 8, -1, -1, -1, 12, N, -1, -1, N, "vddio_sys"), - PINGROUP(power_on_pee4, RSVD0, RSVD1, RSVD2, RSVD3, 0x1038, 1, Y, -1, -1, 6, 8, -1, 10, 11, 12, N, -1, -1, N, "vddio_sys"), - PINGROUP(pwr_i2c_scl_pee5, I2C5, RSVD1, RSVD2, RSVD3, 0x1040, 1, Y, 5, -1, 6, 8, -1, 10, 11, 12, N, -1, -1, N, "vddio_sys"), - PINGROUP(pwr_i2c_sda_pee6, I2C5, RSVD1, RSVD2, RSVD3, 0x1048, 1, Y, 5, -1, 6, 8, -1, 10, 11, 12, N, -1, -1, N, "vddio_sys"), - PINGROUP(ao_retention_n_pee2, GPIO, RSVD1, RSVD2, RSVD3, 0x1060, 1, Y, 5, -1, 6, 8, -1, 10, 11, 12, N, -1, -1, N, "vddio_sys"), PINGROUP(gpu_pwr_req_px0, RSVD0, RSVD1, RSVD2, RSVD3, 0xD000, 0, Y, -1, -1, 6, 8, -1, 10, 11, 12, N, -1, -1, N, "vddio_uart"), PINGROUP(spi3_miso_py1, SPI3, RSVD1, RSVD2, RSVD3, 0xD008, 0, Y, 5, -1, 6, 8, -1, 10, 11, 12, N, -1, -1, N, "vddio_uart"), PINGROUP(spi1_cs0_pz6, SPI1, RSVD1, RSVD2, RSVD3, 0xD010, 0, Y, -1, -1, 6, 8, -1, 10, 11, 12, N, -1, -1, N, "vddio_uart"), @@ -1857,13 +1794,104 @@ static const struct tegra_pinctrl_soc_data tegra194_pinctrl = { .sfsel_in_mux = true, }; +static const struct pinctrl_pin_desc tegra194_aon_pins[] = { + PINCTRL_PIN(TEGRA_PIN_CAN1_DOUT_PAA0, "CAN1_DOUT_PAA0"), + PINCTRL_PIN(TEGRA_PIN_CAN1_DIN_PAA1, "CAN1_DIN_PAA1"), + PINCTRL_PIN(TEGRA_PIN_CAN0_DOUT_PAA2, "CAN0_DOUT_PAA2"), + PINCTRL_PIN(TEGRA_PIN_CAN0_DIN_PAA3, "CAN0_DIN_PAA3"), + PINCTRL_PIN(TEGRA_PIN_CAN0_STB_PAA4, "CAN0_STB_PAA4"), + PINCTRL_PIN(TEGRA_PIN_CAN0_EN_PAA5, "CAN0_EN_PAA5"), + PINCTRL_PIN(TEGRA_PIN_CAN0_WAKE_PAA6, "CAN0_WAKE_PAA6"), + PINCTRL_PIN(TEGRA_PIN_CAN0_ERR_PAA7, "CAN0_ERR_PAA7"), + PINCTRL_PIN(TEGRA_PIN_CAN1_STB_PBB0, "CAN1_STB_PBB0"), + PINCTRL_PIN(TEGRA_PIN_CAN1_EN_PBB1, "CAN1_EN_PBB1"), + PINCTRL_PIN(TEGRA_PIN_CAN1_WAKE_PBB2, "CAN1_WAKE_PBB2"), + PINCTRL_PIN(TEGRA_PIN_CAN1_ERR_PBB3, "CAN1_ERR_PBB3"), + PINCTRL_PIN(TEGRA_PIN_SPI2_SCK_PCC0, "SPI2_SCK_PCC0"), + PINCTRL_PIN(TEGRA_PIN_SPI2_MISO_PCC1, "SPI2_MISO_PCC1"), + PINCTRL_PIN(TEGRA_PIN_SPI2_MOSI_PCC2, "SPI2_MOSI_PCC2"), + PINCTRL_PIN(TEGRA_PIN_SPI2_CS0_PCC3, "SPI2_CS0_PCC3"), + PINCTRL_PIN(TEGRA_PIN_TOUCH_CLK_PCC4, "TOUCH_CLK_PCC4"), + PINCTRL_PIN(TEGRA_PIN_UART3_TX_PCC5, "UART3_TX_PCC5"), + PINCTRL_PIN(TEGRA_PIN_UART3_RX_PCC6, "UART3_RX_PCC6"), + PINCTRL_PIN(TEGRA_PIN_GEN2_I2C_SCL_PCC7, "GEN2_I2C_SCL_PCC7"), + PINCTRL_PIN(TEGRA_PIN_GEN2_I2C_SDA_PDD0, "GEN2_I2C_SDA_PDD0"), + PINCTRL_PIN(TEGRA_PIN_GEN8_I2C_SCL_PDD1, "GEN8_I2C_SCL_PDD1"), + PINCTRL_PIN(TEGRA_PIN_GEN8_I2C_SDA_PDD2, "GEN8_I2C_SDA_PDD2"), + PINCTRL_PIN(TEGRA_PIN_SAFE_STATE_PEE0, "SAFE_STATE_PEE0"), + PINCTRL_PIN(TEGRA_PIN_VCOMP_ALERT_PEE1, "VCOMP_ALERT_PEE1"), + PINCTRL_PIN(TEGRA_PIN_AO_RETENTION_N_PEE2, "AO_RETENTION_N_PEE2"), + PINCTRL_PIN(TEGRA_PIN_BATT_OC_PEE3, "BATT_OC_PEE3"), + PINCTRL_PIN(TEGRA_PIN_POWER_ON_PEE4, "POWER_ON_PEE4"), + PINCTRL_PIN(TEGRA_PIN_PWR_I2C_SCL_PEE5, "PWR_I2C_SCL_PEE5"), + PINCTRL_PIN(TEGRA_PIN_PWR_I2C_SDA_PEE6, "PWR_I2C_SDA_PEE6"), + PINCTRL_PIN(TEGRA_PIN_SYS_RESET_N, "SYS_RESET_N"), + PINCTRL_PIN(TEGRA_PIN_SHUTDOWN_N, "SHUTDOWN_N"), + PINCTRL_PIN(TEGRA_PIN_PMU_INT_N, "PMU_INT_N"), + PINCTRL_PIN(TEGRA_PIN_SOC_PWR_REQ, "SOC_PWR_REQ"), + PINCTRL_PIN(TEGRA_PIN_CLK_32K_IN, "CLK_32K_IN"), +}; + +static const struct tegra_pingroup tegra194_aon_groups[] = { + PINGROUP(shutdown_n, RSVD0, RSVD1, RSVD2, RSVD3, 0x1000, 0, Y, 5, -1, 6, 8, -1, -1, -1, 12, N, -1, -1, N, "vddio_sys"), + PINGROUP(pmu_int_n, RSVD0, RSVD1, RSVD2, RSVD3, 0x1008, 0, Y, -1, -1, 6, 8, -1, -1, -1, 12, N, -1, -1, N, "vddio_sys"), + PINGROUP(safe_state_pee0, SCE, RSVD1, RSVD2, RSVD3, 0x1010, 0, Y, 5, -1, 6, 8, -1, 10, 11, 12, N, -1, -1, N, "vddio_sys"), + PINGROUP(vcomp_alert_pee1, SOC, RSVD1, RSVD2, RSVD3, 0x1018, 0, Y, -1, -1, 6, 8, -1, 10, 11, 12, N, -1, -1, N, "vddio_sys"), + PINGROUP(soc_pwr_req, RSVD0, RSVD1, RSVD2, RSVD3, 0x1020, 0, Y, -1, -1, 6, 8, -1, -1, -1, 12, N, -1, -1, N, "vddio_sys"), + PINGROUP(batt_oc_pee3, SOC, RSVD1, RSVD2, RSVD3, 0x1028, 0, Y, -1, -1, 6, 8, -1, 10, 11, 12, N, -1, -1, N, "vddio_sys"), + PINGROUP(clk_32k_in, RSVD0, RSVD1, RSVD2, RSVD3, 0x1030, 0, Y, -1, -1, -1, 8, -1, -1, -1, 12, N, -1, -1, N, "vddio_sys"), + PINGROUP(power_on_pee4, RSVD0, RSVD1, RSVD2, RSVD3, 0x1038, 0, Y, -1, -1, 6, 8, -1, 10, 11, 12, N, -1, -1, N, "vddio_sys"), + PINGROUP(pwr_i2c_scl_pee5, I2C5, RSVD1, RSVD2, RSVD3, 0x1040, 0, Y, 5, -1, 6, 8, -1, 10, 11, 12, N, -1, -1, N, "vddio_sys"), + PINGROUP(pwr_i2c_sda_pee6, I2C5, RSVD1, RSVD2, RSVD3, 0x1048, 0, Y, 5, -1, 6, 8, -1, 10, 11, 12, N, -1, -1, N, "vddio_sys"), + PINGROUP(ao_retention_n_pee2, GPIO, RSVD1, RSVD2, RSVD3, 0x1060, 0, Y, 5, -1, 6, 8, -1, 10, 11, 12, N, -1, -1, N, "vddio_sys"), + PINGROUP(touch_clk_pcc4, GP, TOUCH, RSVD2, RSVD3, 0x2000, 0, Y, -1, -1, 6, 8, -1, 10, 11, 12, N, -1, -1, N, "vddio_ao"), + PINGROUP(uart3_rx_pcc6, UARTC, RSVD1, RSVD2, RSVD3, 0x2008, 0, Y, 5, -1, 6, 8, -1, 10, 11, 12, N, -1, -1, N, "vddio_ao"), + PINGROUP(uart3_tx_pcc5, UARTC, RSVD1, RSVD2, RSVD3, 0x2010, 0, Y, 5, -1, 6, 8, -1, 10, 11, 12, N, -1, -1, N, "vddio_ao"), + PINGROUP(gen8_i2c_sda_pdd2, I2C8, RSVD1, RSVD2, RSVD3, 0x2018, 0, Y, 5, -1, 6, 8, -1, 10, 11, 12, N, -1, -1, N, "vddio_ao"), + PINGROUP(gen8_i2c_scl_pdd1, I2C8, RSVD1, RSVD2, RSVD3, 0x2020, 0, Y, 5, -1, 6, 8, -1, 10, 11, 12, N, -1, -1, N, "vddio_ao"), + PINGROUP(spi2_mosi_pcc2, SPI2, UARTG, RSVD2, RSVD3, 0x2028, 0, Y, 5, -1, 6, 8, -1, 10, 11, 12, N, -1, -1, N, "vddio_ao"), + PINGROUP(gen2_i2c_scl_pcc7, I2C2, RSVD1, RSVD2, RSVD3, 0x2030, 0, Y, 5, -1, 6, 8, -1, 10, 11, 12, N, -1, -1, N, "vddio_ao"), + PINGROUP(spi2_cs0_pcc3, SPI2, UARTG, RSVD2, RSVD3, 0x2038, 0, Y, 5, -1, 6, 8, -1, 10, 11, 12, N, -1, -1, N, "vddio_ao"), + PINGROUP(gen2_i2c_sda_pdd0, I2C2, RSVD1, RSVD2, RSVD3, 0x2040, 0, Y, 5, -1, 6, 8, -1, 10, 11, 12, N, -1, -1, N, "vddio_ao"), + PINGROUP(spi2_sck_pcc0, SPI2, UARTG, RSVD2, RSVD3, 0x2048, 0, Y, 5, -1, 6, 8, -1, 10, 11, 12, N, -1, -1, N, "vddio_ao"), + PINGROUP(spi2_miso_pcc1, SPI2, UARTG, RSVD2, RSVD3, 0x2050, 0, Y, 5, -1, 6, 8, -1, 10, 11, 12, N, -1, -1, N, "vddio_ao"), + PINGROUP(can1_dout_paa0, CAN1, RSVD1, RSVD2, RSVD3, 0x3000, 0, Y, -1, -1, 6, -1, 9, 10, -1, 12, Y, -1, -1, Y, "vddio_ao_hv"), + PINGROUP(can1_din_paa1, CAN1, RSVD1, RSVD2, RSVD3, 0x3008, 0, Y, -1, -1, 6, -1, 9, 10, -1, 12, Y, -1, -1, Y, "vddio_ao_hv"), + PINGROUP(can0_dout_paa2, CAN0, RSVD1, RSVD2, RSVD3, 0x3010, 0, Y, -1, -1, 6, -1, 9, 10, -1, 12, Y, -1, -1, Y, "vddio_ao_hv"), + PINGROUP(can0_din_paa3, CAN0, RSVD1, RSVD2, RSVD3, 0x3018, 0, Y, -1, -1, 6, -1, 9, 10, -1, 12, Y, -1, -1, Y, "vddio_ao_hv"), + PINGROUP(can0_stb_paa4, RSVD0, WDT, RSVD2, RSVD3, 0x3020, 0, Y, -1, -1, 6, -1, 9, 10, -1, 12, Y, -1, -1, Y, "vddio_ao_hv"), + PINGROUP(can0_en_paa5, RSVD0, RSVD1, RSVD2, RSVD3, 0x3028, 0, Y, -1, -1, 6, -1, 9, 10, -1, 12, Y, -1, -1, Y, "vddio_ao_hv"), + PINGROUP(can0_wake_paa6, RSVD0, RSVD1, RSVD2, RSVD3, 0x3030, 0, Y, -1, -1, 6, -1, 9, 10, -1, 12, Y, -1, -1, Y, "vddio_ao_hv"), + PINGROUP(can0_err_paa7, RSVD0, RSVD1, RSVD2, RSVD3, 0x3038, 0, Y, -1, -1, 6, -1, 9, 10, -1, 12, Y, -1, -1, Y, "vddio_ao_hv"), + PINGROUP(can1_stb_pbb0, RSVD0, DMIC3, DMIC5, RSVD3, 0x3040, 0, Y, -1, -1, 6, -1, 9, 10, -1, 12, Y, -1, -1, Y, "vddio_ao_hv"), + PINGROUP(can1_en_pbb1, RSVD0, DMIC3, DMIC5, RSVD3, 0x3048, 0, Y, -1, -1, 6, -1, 9, 10, -1, 12, Y, -1, -1, Y, "vddio_ao_hv"), + PINGROUP(can1_wake_pbb2, RSVD0, RSVD1, RSVD2, RSVD3, 0x3050, 0, Y, -1, -1, 6, -1, 9, 10, -1, 12, Y, -1, -1, Y, "vddio_ao_hv"), + PINGROUP(can1_err_pbb3, RSVD0, RSVD1, RSVD2, RSVD3, 0x3058, 0, Y, -1, -1, 6, -1, 9, 10, -1, 12, Y, -1, -1, Y, "vddio_ao_hv"), +}; + +static const struct tegra_pinctrl_soc_data tegra194_pinctrl_aon = { + .pins = tegra194_aon_pins, + .npins = ARRAY_SIZE(tegra194_aon_pins), + .functions = tegra194_functions, + .nfunctions = ARRAY_SIZE(tegra194_functions), + .groups = tegra194_aon_groups, + .ngroups = ARRAY_SIZE(tegra194_aon_groups), + .hsm_in_mux = true, + .schmitt_in_mux = true, + .drvtype_in_mux = true, + .sfsel_in_mux = true, +}; + static int tegra194_pinctrl_probe(struct platform_device *pdev) { - return tegra_pinctrl_probe(pdev, &tegra194_pinctrl); + const struct tegra_pinctrl_soc_data *soc = of_device_get_match_data(&pdev->dev); + + return tegra_pinctrl_probe(pdev, soc); } static const struct of_device_id tegra194_pinctrl_of_match[] = { - { .compatible = "nvidia,tegra194-pinmux", }, + { .compatible = "nvidia,tegra194-pinmux", .data = &tegra194_pinctrl }, + { .compatible = "nvidia,tegra194-pinmux-aon", .data = &tegra194_pinctrl_aon }, { }, }; diff --git a/drivers/pinctrl/ti/pinctrl-ti-iodelay.c b/drivers/pinctrl/ti/pinctrl-ti-iodelay.c index 4e2382778d38f5..53abddaebce1bf 100644 --- a/drivers/pinctrl/ti/pinctrl-ti-iodelay.c +++ b/drivers/pinctrl/ti/pinctrl-ti-iodelay.c @@ -15,12 +15,14 @@ #include <linux/module.h> #include <linux/of.h> #include <linux/of_device.h> -#include <linux/pinctrl/pinconf.h> -#include <linux/pinctrl/pinconf-generic.h> -#include <linux/pinctrl/pinctrl.h> #include <linux/regmap.h> +#include <linux/seq_file.h> #include <linux/slab.h> +#include <linux/pinctrl/pinconf-generic.h> +#include <linux/pinctrl/pinconf.h> +#include <linux/pinctrl/pinctrl.h> + #include "../core.h" #include "../devicetree.h" diff --git a/drivers/pinctrl/uniphier/pinctrl-uniphier-core.c b/drivers/pinctrl/uniphier/pinctrl-uniphier-core.c index ade348b49b3148..18d3a4f69e6391 100644 --- a/drivers/pinctrl/uniphier/pinctrl-uniphier-core.c +++ b/drivers/pinctrl/uniphier/pinctrl-uniphier-core.c @@ -6,12 +6,14 @@ #include <linux/list.h> #include <linux/mfd/syscon.h> #include <linux/of.h> -#include <linux/pinctrl/pinconf.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/seq_file.h> + #include <linux/pinctrl/pinconf-generic.h> +#include <linux/pinctrl/pinconf.h> #include <linux/pinctrl/pinctrl.h> #include <linux/pinctrl/pinmux.h> -#include <linux/platform_device.h> -#include <linux/regmap.h> #include "../core.h" #include "../pinctrl-utils.h" diff --git a/drivers/pwm/pwm-lpss-pci.c b/drivers/pwm/pwm-lpss-pci.c index 98413d36433818..b4134bee2863d3 100644 --- a/drivers/pwm/pwm-lpss-pci.c +++ b/drivers/pwm/pwm-lpss-pci.c @@ -30,7 +30,7 @@ static int pwm_lpss_probe_pci(struct pci_dev *pdev, return err; info = (struct pwm_lpss_boardinfo *)id->driver_data; - lpwm = pwm_lpss_probe(&pdev->dev, pcim_iomap_table(pdev)[0], info); + lpwm = devm_pwm_lpss_probe(&pdev->dev, pcim_iomap_table(pdev)[0], info); if (IS_ERR(lpwm)) return PTR_ERR(lpwm); diff --git a/drivers/pwm/pwm-lpss-platform.c b/drivers/pwm/pwm-lpss-platform.c index c48c6f2b2cd8f4..f350607e28bdae 100644 --- a/drivers/pwm/pwm-lpss-platform.c +++ b/drivers/pwm/pwm-lpss-platform.c @@ -31,7 +31,7 @@ static int pwm_lpss_probe_platform(struct platform_device *pdev) if (IS_ERR(base)) return PTR_ERR(base); - lpwm = pwm_lpss_probe(&pdev->dev, base, info); + lpwm = devm_pwm_lpss_probe(&pdev->dev, base, info); if (IS_ERR(lpwm)) return PTR_ERR(lpwm); diff --git a/drivers/pwm/pwm-lpss.c b/drivers/pwm/pwm-lpss.c index accdef5dd58e76..bb740346b69910 100644 --- a/drivers/pwm/pwm-lpss.c +++ b/drivers/pwm/pwm-lpss.c @@ -244,15 +244,15 @@ static const struct pwm_ops pwm_lpss_ops = { .owner = THIS_MODULE, }; -struct pwm_lpss_chip *pwm_lpss_probe(struct device *dev, void __iomem *base, - const struct pwm_lpss_boardinfo *info) +struct pwm_lpss_chip *devm_pwm_lpss_probe(struct device *dev, void __iomem *base, + const struct pwm_lpss_boardinfo *info) { struct pwm_lpss_chip *lpwm; unsigned long c; int i, ret; u32 ctrl; - if (WARN_ON(info->npwm > MAX_PWMS)) + if (WARN_ON(info->npwm > LPSS_MAX_PWMS)) return ERR_PTR(-ENODEV); lpwm = devm_kzalloc(dev, sizeof(*lpwm), GFP_KERNEL); @@ -284,7 +284,7 @@ struct pwm_lpss_chip *pwm_lpss_probe(struct device *dev, void __iomem *base, return lpwm; } -EXPORT_SYMBOL_GPL(pwm_lpss_probe); +EXPORT_SYMBOL_GPL(devm_pwm_lpss_probe); MODULE_DESCRIPTION("PWM driver for Intel LPSS"); MODULE_AUTHOR("Mika Westerberg <mika.westerberg@linux.intel.com>"); diff --git a/drivers/pwm/pwm-lpss.h b/drivers/pwm/pwm-lpss.h index 8e82eb5a7e0091..bf841250385f6a 100644 --- a/drivers/pwm/pwm-lpss.h +++ b/drivers/pwm/pwm-lpss.h @@ -10,10 +10,12 @@ #ifndef __PWM_LPSS_H #define __PWM_LPSS_H -#include <linux/device.h> #include <linux/pwm.h> +#include <linux/types.h> -#define MAX_PWMS 4 +#include <linux/platform_data/x86/pwm-lpss.h> + +#define LPSS_MAX_PWMS 4 struct pwm_lpss_chip { struct pwm_chip chip; @@ -21,29 +23,9 @@ struct pwm_lpss_chip { const struct pwm_lpss_boardinfo *info; }; -struct pwm_lpss_boardinfo { - unsigned long clk_rate; - unsigned int npwm; - unsigned long base_unit_bits; - /* - * Some versions of the IP may stuck in the state machine if enable - * bit is not set, and hence update bit will show busy status till - * the reset. For the rest it may be otherwise. - */ - bool bypass; - /* - * On some devices the _PS0/_PS3 AML code of the GPU (GFX0) device - * messes with the PWM0 controllers state, - */ - bool other_devices_aml_touches_pwm_regs; -}; - extern const struct pwm_lpss_boardinfo pwm_lpss_byt_info; extern const struct pwm_lpss_boardinfo pwm_lpss_bsw_info; extern const struct pwm_lpss_boardinfo pwm_lpss_bxt_info; extern const struct pwm_lpss_boardinfo pwm_lpss_tng_info; -struct pwm_lpss_chip *pwm_lpss_probe(struct device *dev, void __iomem *base, - const struct pwm_lpss_boardinfo *info); - #endif /* __PWM_LPSS_H */ diff --git a/drivers/soc/fsl/qe/gpio.c b/drivers/soc/fsl/qe/gpio.c index 1440922341d824..1c41eb49d5a77f 100644 --- a/drivers/soc/fsl/qe/gpio.c +++ b/drivers/soc/fsl/qe/gpio.c @@ -18,6 +18,8 @@ #include <linux/gpio/driver.h> #include <linux/slab.h> #include <linux/export.h> +#include <linux/property.h> + #include <soc/fsl/qe/qe.h> struct qe_gpio_chip { @@ -195,7 +197,7 @@ struct qe_pin *qe_pin_request(struct device *dev, int index) */ qe_pin->num = gpio_num - gc->base; - if (!of_device_is_compatible(gc->of_node, "fsl,mpc8323-qe-pario-bank")) { + if (!fwnode_device_is_compatible(gc->fwnode, "fsl,mpc8323-qe-pario-bank")) { dev_dbg(dev, "%s: tried to get a non-qe pin\n", __func__); err = -EINVAL; goto err0; diff --git a/include/dt-bindings/pinctrl/mt6795-pinfunc.h b/include/dt-bindings/pinctrl/mt6795-pinfunc.h index bd1c5a9fad069f..dfd3f6f13e0d77 100644 --- a/include/dt-bindings/pinctrl/mt6795-pinfunc.h +++ b/include/dt-bindings/pinctrl/mt6795-pinfunc.h @@ -4,8 +4,8 @@ * Author: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> */ -#ifndef __DTS_MT8173_PINFUNC_H -#define __DTS_MT8173_PINFUNC_H +#ifndef __DTS_MT6795_PINFUNC_H +#define __DTS_MT6795_PINFUNC_H #include <dt-bindings/pinctrl/mt65xx.h> diff --git a/include/linux/gpio.h b/include/linux/gpio.h index a370387fa40680..346f60bbab3027 100644 --- a/include/linux/gpio.h +++ b/include/linux/gpio.h @@ -98,9 +98,9 @@ int devm_gpio_request_one(struct device *dev, unsigned gpio, #else /* ! CONFIG_GPIOLIB */ +#include <linux/bug.h> #include <linux/kernel.h> #include <linux/types.h> -#include <linux/bug.h> struct device; struct gpio_chip; diff --git a/include/linux/gpio/aspeed.h b/include/linux/gpio/aspeed.h index 1bfb3cdc86d050..9a547e66c8c45c 100644 --- a/include/linux/gpio/aspeed.h +++ b/include/linux/gpio/aspeed.h @@ -1,6 +1,10 @@ #ifndef __GPIO_ASPEED_H #define __GPIO_ASPEED_H +#include <linux/types.h> + +struct gpio_desc; + struct aspeed_gpio_copro_ops { int (*request_access)(void *data); int (*release_access)(void *data); diff --git a/include/linux/gpio/driver.h b/include/linux/gpio/driver.h index 88ae4513abb5f7..44783fc161254b 100644 --- a/include/linux/gpio/driver.h +++ b/include/linux/gpio/driver.h @@ -7,8 +7,8 @@ #include <linux/irqchip/chained_irq.h> #include <linux/irqdomain.h> #include <linux/lockdep.h> -#include <linux/pinctrl/pinctrl.h> #include <linux/pinctrl/pinconf-generic.h> +#include <linux/pinctrl/pinctrl.h> #include <linux/property.h> #include <linux/types.h> diff --git a/include/linux/gpio/gpio-reg.h b/include/linux/gpio/gpio-reg.h index 39b888c40b3950..3913b6660ed1e0 100644 --- a/include/linux/gpio/gpio-reg.h +++ b/include/linux/gpio/gpio-reg.h @@ -2,9 +2,13 @@ #ifndef GPIO_REG_H #define GPIO_REG_H +#include <linux/types.h> + struct device; struct irq_domain; +struct gpio_chip; + struct gpio_chip *gpio_reg_init(struct device *dev, void __iomem *reg, int base, int num, const char *label, u32 direction, u32 def_out, const char *const *names, struct irq_domain *irqdom, const int *irqs); diff --git a/include/linux/gpio/machine.h b/include/linux/gpio/machine.h index 0b619eb7ae83be..44e5f162973eb6 100644 --- a/include/linux/gpio/machine.h +++ b/include/linux/gpio/machine.h @@ -3,7 +3,6 @@ #define __LINUX_GPIO_MACHINE_H #include <linux/types.h> -#include <linux/list.h> enum gpio_lookup_flags { GPIO_ACTIVE_HIGH = (0 << 0), diff --git a/include/linux/pinctrl/consumer.h b/include/linux/pinctrl/consumer.h index 019fecd75d0cfb..4729d54e899535 100644 --- a/include/linux/pinctrl/consumer.h +++ b/include/linux/pinctrl/consumer.h @@ -12,14 +12,15 @@ #define __LINUX_PINCTRL_CONSUMER_H #include <linux/err.h> -#include <linux/list.h> -#include <linux/seq_file.h> +#include <linux/types.h> + #include <linux/pinctrl/pinctrl-state.h> +struct device; + /* This struct is private to the core and should be regarded as a cookie */ struct pinctrl; struct pinctrl_state; -struct device; #ifdef CONFIG_PINCTRL @@ -33,9 +34,8 @@ extern int pinctrl_gpio_set_config(unsigned gpio, unsigned long config); extern struct pinctrl * __must_check pinctrl_get(struct device *dev); extern void pinctrl_put(struct pinctrl *p); -extern struct pinctrl_state * __must_check pinctrl_lookup_state( - struct pinctrl *p, - const char *name); +extern struct pinctrl_state * __must_check pinctrl_lookup_state(struct pinctrl *p, + const char *name); extern int pinctrl_select_state(struct pinctrl *p, struct pinctrl_state *s); extern struct pinctrl * __must_check devm_pinctrl_get(struct device *dev); @@ -101,9 +101,8 @@ static inline void pinctrl_put(struct pinctrl *p) { } -static inline struct pinctrl_state * __must_check pinctrl_lookup_state( - struct pinctrl *p, - const char *name) +static inline struct pinctrl_state * __must_check pinctrl_lookup_state(struct pinctrl *p, + const char *name) { return NULL; } @@ -145,8 +144,8 @@ static inline int pinctrl_pm_select_idle_state(struct device *dev) #endif /* CONFIG_PINCTRL */ -static inline struct pinctrl * __must_check pinctrl_get_select( - struct device *dev, const char *name) +static inline struct pinctrl * __must_check pinctrl_get_select(struct device *dev, + const char *name) { struct pinctrl *p; struct pinctrl_state *s; @@ -171,14 +170,13 @@ static inline struct pinctrl * __must_check pinctrl_get_select( return p; } -static inline struct pinctrl * __must_check pinctrl_get_select_default( - struct device *dev) +static inline struct pinctrl * __must_check pinctrl_get_select_default(struct device *dev) { return pinctrl_get_select(dev, PINCTRL_STATE_DEFAULT); } -static inline struct pinctrl * __must_check devm_pinctrl_get_select( - struct device *dev, const char *name) +static inline struct pinctrl * __must_check devm_pinctrl_get_select(struct device *dev, + const char *name) { struct pinctrl *p; struct pinctrl_state *s; @@ -203,8 +201,7 @@ static inline struct pinctrl * __must_check devm_pinctrl_get_select( return p; } -static inline struct pinctrl * __must_check devm_pinctrl_get_select_default( - struct device *dev) +static inline struct pinctrl * __must_check devm_pinctrl_get_select_default(struct device *dev) { return devm_pinctrl_get_select(dev, PINCTRL_STATE_DEFAULT); } diff --git a/include/linux/pinctrl/devinfo.h b/include/linux/pinctrl/devinfo.h index a48ff69acddd4b..9e8b559e125305 100644 --- a/include/linux/pinctrl/devinfo.h +++ b/include/linux/pinctrl/devinfo.h @@ -14,11 +14,15 @@ #ifndef PINCTRL_DEVINFO_H #define PINCTRL_DEVINFO_H +struct device; + #ifdef CONFIG_PINCTRL /* The device core acts as a consumer toward pinctrl */ #include <linux/pinctrl/consumer.h> +struct pinctrl; + /** * struct dev_pin_info - pin state container for devices * @p: pinctrl handle for the containing device @@ -42,8 +46,6 @@ extern int pinctrl_init_done(struct device *dev); #else -struct device; - /* Stubs if we're not using pinctrl */ static inline int pinctrl_bind_pins(struct device *dev) diff --git a/include/linux/pinctrl/machine.h b/include/linux/pinctrl/machine.h index e987dc9fd2afb7..0639b36f43c560 100644 --- a/include/linux/pinctrl/machine.h +++ b/include/linux/pinctrl/machine.h @@ -11,7 +11,7 @@ #ifndef __LINUX_PINCTRL_MACHINE_H #define __LINUX_PINCTRL_MACHINE_H -#include <linux/bug.h> +#include <linux/kernel.h> /* ARRAY_SIZE() */ #include <linux/pinctrl/pinctrl-state.h> @@ -149,16 +149,18 @@ struct pinctrl_map { #define PIN_MAP_CONFIGS_GROUP_HOG_DEFAULT(dev, grp, cfgs) \ PIN_MAP_CONFIGS_GROUP(dev, PINCTRL_STATE_DEFAULT, dev, grp, cfgs) +struct pinctrl_map; + #ifdef CONFIG_PINCTRL extern int pinctrl_register_mappings(const struct pinctrl_map *map, - unsigned num_maps); + unsigned num_maps); extern void pinctrl_unregister_mappings(const struct pinctrl_map *map); extern void pinctrl_provide_dummies(void); #else static inline int pinctrl_register_mappings(const struct pinctrl_map *map, - unsigned num_maps) + unsigned num_maps) { return 0; } diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h index 2422211d6a5a7b..d74b7a4ea154de 100644 --- a/include/linux/pinctrl/pinconf-generic.h +++ b/include/linux/pinctrl/pinconf-generic.h @@ -11,9 +11,12 @@ #ifndef __LINUX_PINCTRL_PINCONF_GENERIC_H #define __LINUX_PINCTRL_PINCONF_GENERIC_H -#include <linux/device.h> +#include <linux/types.h> + #include <linux/pinctrl/machine.h> +struct device_node; + struct pinctrl_dev; struct pinctrl_map; @@ -35,7 +38,8 @@ struct pinctrl_map; * impedance. * @PIN_CONFIG_BIAS_PULL_DOWN: the pin will be pulled down (usually with high * impedance to GROUND). If the argument is != 0 pull-down is enabled, - * if it is 0, pull-down is total, i.e. the pin is connected to GROUND. + * the value is interpreted by the driver and can be custom or an SI unit + * such as Ohms. * @PIN_CONFIG_BIAS_PULL_PIN_DEFAULT: the pin will be pulled up or down based * on embedded knowledge of the controller hardware, like current mux * function. The pull direction and possibly strength too will normally @@ -46,7 +50,8 @@ struct pinctrl_map; * @PIN_CONFIG_BIAS_DISABLE. * @PIN_CONFIG_BIAS_PULL_UP: the pin will be pulled up (usually with high * impedance to VDD). If the argument is != 0 pull-up is enabled, - * if it is 0, pull-up is total, i.e. the pin is connected to VDD. + * the value is interpreted by the driver and can be custom or an SI unit + * such as Ohms. * @PIN_CONFIG_DRIVE_OPEN_DRAIN: the pin will be driven with open drain (open * collector) which means it is usually wired with other output ports * which are then pulled up with an external resistor. Setting this @@ -196,25 +201,25 @@ int pinconf_generic_dt_node_to_map(struct pinctrl_dev *pctldev, void pinconf_generic_dt_free_map(struct pinctrl_dev *pctldev, struct pinctrl_map *map, unsigned num_maps); -static inline int pinconf_generic_dt_node_to_map_group( - struct pinctrl_dev *pctldev, struct device_node *np_config, - struct pinctrl_map **map, unsigned *num_maps) +static inline int pinconf_generic_dt_node_to_map_group(struct pinctrl_dev *pctldev, + struct device_node *np_config, struct pinctrl_map **map, + unsigned *num_maps) { return pinconf_generic_dt_node_to_map(pctldev, np_config, map, num_maps, PIN_MAP_TYPE_CONFIGS_GROUP); } -static inline int pinconf_generic_dt_node_to_map_pin( - struct pinctrl_dev *pctldev, struct device_node *np_config, - struct pinctrl_map **map, unsigned *num_maps) +static inline int pinconf_generic_dt_node_to_map_pin(struct pinctrl_dev *pctldev, + struct device_node *np_config, struct pinctrl_map **map, + unsigned *num_maps) { return pinconf_generic_dt_node_to_map(pctldev, np_config, map, num_maps, PIN_MAP_TYPE_CONFIGS_PIN); } -static inline int pinconf_generic_dt_node_to_map_all( - struct pinctrl_dev *pctldev, struct device_node *np_config, - struct pinctrl_map **map, unsigned *num_maps) +static inline int pinconf_generic_dt_node_to_map_all(struct pinctrl_dev *pctldev, + struct device_node *np_config, struct pinctrl_map **map, + unsigned *num_maps) { /* * passing the type as PIN_MAP_TYPE_INVALID causes the underlying parser diff --git a/include/linux/pinctrl/pinctrl.h b/include/linux/pinctrl/pinctrl.h index 487117ccb1bc26..a0d39b30343119 100644 --- a/include/linux/pinctrl/pinctrl.h +++ b/include/linux/pinctrl/pinctrl.h @@ -11,20 +11,20 @@ #ifndef __LINUX_PINCTRL_PINCTRL_H #define __LINUX_PINCTRL_PINCTRL_H -#include <linux/radix-tree.h> -#include <linux/list.h> -#include <linux/seq_file.h> -#include <linux/pinctrl/pinctrl-state.h> -#include <linux/pinctrl/devinfo.h> +#include <linux/types.h> struct device; +struct device_node; +struct gpio_chip; +struct module; +struct seq_file; + +struct pin_config_item; +struct pinconf_generic_params; +struct pinconf_ops; struct pinctrl_dev; struct pinctrl_map; struct pinmux_ops; -struct pinconf_ops; -struct pin_config_item; -struct gpio_chip; -struct device_node; /** * struct pingroup - provides information on pingroup @@ -40,7 +40,7 @@ struct pingroup { /* Convenience macro to define a single named or anonymous pingroup */ #define PINCTRL_PINGROUP(_name, _pins, _npins) \ -(struct pingroup){ \ +(struct pingroup) { \ .name = _name, \ .pins = _pins, \ .npins = _npins, \ diff --git a/include/linux/pinctrl/pinmux.h b/include/linux/pinctrl/pinmux.h index 9a647fa5c8f1f0..a7e370965c5312 100644 --- a/include/linux/pinctrl/pinmux.h +++ b/include/linux/pinctrl/pinmux.h @@ -11,11 +11,10 @@ #ifndef __LINUX_PINCTRL_PINMUX_H #define __LINUX_PINCTRL_PINMUX_H -#include <linux/list.h> -#include <linux/seq_file.h> -#include <linux/pinctrl/pinctrl.h> +#include <linux/types.h> struct pinctrl_dev; +struct pinctrl_gpio_range; /** * struct pinmux_ops - pinmux operations, to be implemented by pin controller diff --git a/include/linux/platform_data/x86/pwm-lpss.h b/include/linux/platform_data/x86/pwm-lpss.h new file mode 100644 index 00000000000000..c852fe24fe2a3e --- /dev/null +++ b/include/linux/platform_data/x86/pwm-lpss.h @@ -0,0 +1,33 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* Intel Low Power Subsystem PWM controller driver */ + +#ifndef __PLATFORM_DATA_X86_PWM_LPSS_H +#define __PLATFORM_DATA_X86_PWM_LPSS_H + +#include <linux/types.h> + +struct device; + +struct pwm_lpss_chip; + +struct pwm_lpss_boardinfo { + unsigned long clk_rate; + unsigned int npwm; + unsigned long base_unit_bits; + /* + * Some versions of the IP may stuck in the state machine if enable + * bit is not set, and hence update bit will show busy status till + * the reset. For the rest it may be otherwise. + */ + bool bypass; + /* + * On some devices the _PS0/_PS3 AML code of the GPU (GFX0) device + * messes with the PWM0 controllers state, + */ + bool other_devices_aml_touches_pwm_regs; +}; + +struct pwm_lpss_chip *devm_pwm_lpss_probe(struct device *dev, void __iomem *base, + const struct pwm_lpss_boardinfo *info); + +#endif /* __PLATFORM_DATA_X86_PWM_LPSS_H */ diff --git a/include/linux/property.h b/include/linux/property.h index 117cc200c656da..67371c96313478 100644 --- a/include/linux/property.h +++ b/include/linux/property.h @@ -50,7 +50,6 @@ int device_property_read_string(struct device *dev, const char *propname, int device_property_match_string(struct device *dev, const char *propname, const char *string); -bool fwnode_device_is_available(const struct fwnode_handle *fwnode); bool fwnode_property_present(const struct fwnode_handle *fwnode, const char *propname); int fwnode_property_read_u8_array(const struct fwnode_handle *fwnode, @@ -72,6 +71,15 @@ int fwnode_property_read_string(const struct fwnode_handle *fwnode, const char *propname, const char **val); int fwnode_property_match_string(const struct fwnode_handle *fwnode, const char *propname, const char *string); + +bool fwnode_device_is_available(const struct fwnode_handle *fwnode); + +static inline +bool fwnode_device_is_compatible(const struct fwnode_handle *fwnode, const char *compat) +{ + return fwnode_property_match_string(fwnode, "compatible", compat) >= 0; +} + int fwnode_property_get_reference_args(const struct fwnode_handle *fwnode, const char *prop, const char *nargs_prop, unsigned int nargs, unsigned int index, diff --git a/include/linux/pwm.h b/include/linux/pwm.h index d70c6e5a839d69..bba492eea96c55 100644 --- a/include/linux/pwm.h +++ b/include/linux/pwm.h @@ -478,6 +478,11 @@ static inline int pwmchip_remove(struct pwm_chip *chip) return -EINVAL; } +static inline int devm_pwmchip_add(struct device *dev, struct pwm_chip *chip) +{ + return -EINVAL; +} + static inline struct pwm_device *pwm_request_from_chip(struct pwm_chip *chip, unsigned int index, const char *label) |