aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/serial/v850e_uart.c
blob: 9378895a8d56e9506a8e3569173087138089b832 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
/*
 * drivers/serial/v850e_uart.c -- Serial I/O using V850E on-chip UART or UARTB
 *
 *  Copyright (C) 2001,02,03  NEC Electronics Corporation
 *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
 *
 * This file is subject to the terms and conditions of the GNU General
 * Public License.  See the file COPYING in the main directory of this
 * archive for more details.
 *
 * Written by Miles Bader <miles@gnu.org>
 */

/* This driver supports both the original V850E UART interface (called
   merely `UART' in the docs) and the newer `UARTB' interface, which is
   roughly a superset of the first one.  The selection is made at
   configure time -- if CONFIG_V850E_UARTB is defined, then UARTB is
   presumed, otherwise the old UART -- as these are on-CPU UARTS, a system
   can never have both.

   The UARTB interface also has a 16-entry FIFO mode, which is not
   yet supported by this driver.  */

#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/console.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/serial.h>
#include <linux/serial_core.h>

#include <asm/v850e_uart.h>

/* Initial UART state.  This may be overridden by machine-dependent headers. */
#ifndef V850E_UART_INIT_BAUD
#define V850E_UART_INIT_BAUD	115200
#endif
#ifndef V850E_UART_INIT_CFLAGS
#define V850E_UART_INIT_CFLAGS	(B115200 | CS8 | CREAD)
#endif

/* A string used for prefixing printed descriptions; since the same UART
   macro is actually used on other chips than the V850E.  This must be a
   constant string.  */
#ifndef V850E_UART_CHIP_NAME
#define V850E_UART_CHIP_NAME	"V850E"
#endif

#define V850E_UART_MINOR_BASE	64	   /* First tty minor number */


/* Low-level UART functions.  */

/* Configure and turn on uart channel CHAN, using the termios `control
   modes' bits in CFLAGS, and a baud-rate of BAUD.  */
void v850e_uart_configure (unsigned chan, unsigned cflags, unsigned baud)
{
	int flags;
	v850e_uart_speed_t old_speed;
	v850e_uart_config_t old_config;
	v850e_uart_speed_t new_speed = v850e_uart_calc_speed (baud);
	v850e_uart_config_t new_config = v850e_uart_calc_config (cflags);

	/* Disable interrupts while we're twiddling the hardware.  */
	local_irq_save (flags);

#ifdef V850E_UART_PRE_CONFIGURE
	V850E_UART_PRE_CONFIGURE (chan, cflags, baud);
#endif

	old_config = V850E_UART_CONFIG (chan);
	old_speed = v850e_uart_speed (chan);

	if (! v850e_uart_speed_eq (old_speed, new_speed)) {
		/* The baud rate has changed.  First, disable the UART.  */
		V850E_UART_CONFIG (chan) = V850E_UART_CONFIG_FINI;
		old_config = 0;	/* Force the uart to be re-initialized. */

		/* Reprogram the baud-rate generator.  */
		v850e_uart_set_speed (chan, new_speed);
	}

	if (! (old_config & V850E_UART_CONFIG_ENABLED)) {
		/* If we are using the uart for the first time, start by
		   enabling it, which must be done before turning on any
		   other bits.  */
		V850E_UART_CONFIG (chan) = V850E_UART_CONFIG_INIT;
		/* See the initial state.  */
		old_config = V850E_UART_CONFIG (chan);
	}

	if (new_config != old_config) {
		/* Which of the TXE/RXE bits we'll temporarily turn off
		   before changing other control bits.  */
		unsigned temp_disable = 0;
		/* Which of the TXE/RXE bits will be enabled.  */
		unsigned enable = 0;
		unsigned changed_bits = new_config ^ old_config;

		/* Which of RX/TX will be enabled in the new configuration.  */
		if (new_config & V850E_UART_CONFIG_RX_BITS)
			enable |= (new_config & V850E_UART_CONFIG_RX_ENABLE);
		if (new_config & V850E_UART_CONFIG_TX_BITS)
			enable |= (new_config & V850E_UART_CONFIG_TX_ENABLE);

		/* Figure out which of RX/TX needs to be disabled; note
		   that this will only happen if they're not already
		   disabled.  */
		if (changed_bits & V850E_UART_CONFIG_RX_BITS)
			temp_disable
				|= (old_config & V850E_UART_CONFIG_RX_ENABLE);
		if (changed_bits & V850E_UART_CONFIG_TX_BITS)
			temp_disable
				|= (old_config & V850E_UART_CONFIG_TX_ENABLE);

		/* We have to turn off RX and/or TX mode before changing
		   any associated control bits.  */
		if (temp_disable)
			V850E_UART_CONFIG (chan) = old_config & ~temp_disable;

		/* Write the new control bits, while RX/TX are disabled. */ 
		if (changed_bits & ~enable)
			V850E_UART_CONFIG (chan) = new_config & ~enable;

		v850e_uart_config_delay (new_config, new_speed);

		/* Write the final version, with enable bits turned on.  */
		V850E_UART_CONFIG (chan) = new_config;
	}

	local_irq_restore (flags);
}


/*  Low-level console. */

#ifdef CONFIG_V850E_UART_CONSOLE

static void v850e_uart_cons_write (struct console *co,
				   const char *s, unsigned count)
{
	if (count > 0) {
		unsigned chan = co->index;
		unsigned irq = V850E_UART_TX_IRQ (chan);
		int irq_was_enabled, irq_was_pending, flags;

		/* We don't want to get `transmission completed'
		   interrupts, since we're busy-waiting, so we disable them
		   while sending (we don't disable interrupts entirely
		   because sending over a serial line is really slow).  We
		   save the status of the tx interrupt and restore it when
		   we're done so that using printk doesn't interfere with
		   normal serial transmission (other than interleaving the
		   output, of course!).  This should work correctly even if
		   this function is interrupted and the interrupt printks
		   something.  */

		/* Disable interrupts while fiddling with tx interrupt.  */
		local_irq_save (flags);
		/* Get current tx interrupt status.  */
		irq_was_enabled = v850e_intc_irq_enabled (irq);
		irq_was_pending = v850e_intc_irq_pending (irq);
		/* Disable tx interrupt if necessary.  */
		if (irq_was_enabled)
			v850e_intc_disable_irq (irq);
		/* Turn interrupts back on.  */
		local_irq_restore (flags);

		/* Send characters.  */
		while (count > 0) {
			int ch = *s++;

			if (ch == '\n') {
				/* We don't have the benefit of a tty
				   driver, so translate NL into CR LF.  */
				v850e_uart_wait_for_xmit_ok (chan);
				v850e_uart_putc (chan, '\r');
			}

			v850e_uart_wait_for_xmit_ok (chan);
			v850e_uart_putc (chan, ch);

			count--;
		}

		/* Restore saved tx interrupt status.  */
		if (irq_was_enabled) {
			/* Wait for the last character we sent to be
			   completely transmitted (as we'll get an
			   interrupt interrupt at that point).  */
			v850e_uart_wait_for_xmit_done (chan);
			/* Clear pending interrupts received due
			   to our transmission, unless there was already
			   one pending, in which case we want the
			   handler to be called.  */
			if (! irq_was_pending)
				v850e_intc_clear_pending_irq (irq);
			/* ... and then turn back on handling.  */
			v850e_intc_enable_irq (irq);
		}
	}
}

extern struct uart_driver v850e_uart_driver;
static struct console v850e_uart_cons =
{
    .name	= "ttyS",
    .write	= v850e_uart_cons_write,
    .device	= uart_console_device,
    .flags	= CON_PRINTBUFFER,
    .cflag	= V850E_UART_INIT_CFLAGS,
    .index	= -1,
    .data	= &v850e_uart_driver,
};

void v850e_uart_cons_init (unsigned chan)
{
	v850e_uart_configure (chan, V850E_UART_INIT_CFLAGS,
			      V850E_UART_INIT_BAUD);
	v850e_uart_cons.index = chan;
	register_console (&v850e_uart_cons);
	printk ("Console: %s on-chip UART channel %d\n",
		V850E_UART_CHIP_NAME, chan);
}

/* This is what the init code actually calls.  */
static int v850e_uart_console_init (void)
{
	v850e_uart_cons_init (V850E_UART_CONSOLE_CHANNEL);
	return 0;
}
console_initcall(v850e_uart_console_init);

#define V850E_UART_CONSOLE &v850e_uart_cons

#else /* !CONFIG_V850E_UART_CONSOLE */
#define V850E_UART_CONSOLE 0
#endif /* CONFIG_V850E_UART_CONSOLE */

/* TX/RX interrupt handlers.  */

static void v850e_uart_stop_tx (struct uart_port *port);

void v850e_uart_tx (struct uart_port *port)
{
	struct circ_buf *xmit = &port->info->xmit;
	int stopped = uart_tx_stopped (port);

	if (v850e_uart_xmit_ok (port->line)) {
		int tx_ch;

		if (port->x_char) {
			tx_ch = port->x_char;
			port->x_char = 0;
		} else if (!uart_circ_empty (xmit) && !stopped) {
			tx_ch = xmit->buf[xmit->tail];
			xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
		} else
			goto no_xmit;

		v850e_uart_putc (port->line, tx_ch);
		port->icount.tx++;

		if (uart_circ_chars_pending (xmit) < WAKEUP_CHARS)
			uart_write_wakeup (port);
	}

 no_xmit:
	if (uart_circ_empty (xmit) || stopped)
		v850e_uart_stop_tx (port, stopped);
}

static irqreturn_t v850e_uart_tx_irq(int irq, void *data, struct pt_regs *regs)
{
	struct uart_port *port = data;
	v850e_uart_tx (port);
	return IRQ_HANDLED;
}

static irqreturn_t v850e_uart_rx_irq(int irq, void *data, struct pt_regs *regs)
{
	struct uart_port *port = data;
	unsigned ch_stat = TTY_NORMAL;
	unsigned ch = v850e_uart_getc (port->line);
	unsigned err = v850e_uart_err (port->line);

	if (err) {
		if (err & V850E_UART_ERR_OVERRUN) {
			ch_stat = TTY_OVERRUN;
			port->icount.overrun++;
		} else if (err & V850E_UART_ERR_FRAME) {
			ch_stat = TTY_FRAME;
			port->icount.frame++;
		} else if (err & V850E_UART_ERR_PARITY) {
			ch_stat = TTY_PARITY;
			port->icount.parity++;
		}
	}

	port->icount.rx++;

	tty_insert_flip_char (port->info->tty, ch, ch_stat);
	tty_schedule_flip (port->info->tty);

	return IRQ_HANDLED;
}


/* Control functions for the serial framework.  */

static void v850e_uart_nop (struct uart_port *port) { }
static int v850e_uart_success (struct uart_port *port) { return 0; }

static unsigned v850e_uart_tx_empty (struct uart_port *port)
{
	return TIOCSER_TEMT;	/* Can't detect.  */
}

static void v850e_uart_set_mctrl (struct uart_port *port, unsigned mctrl)
{
#ifdef V850E_UART_SET_RTS
	V850E_UART_SET_RTS (port->line, (mctrl & TIOCM_RTS));
#endif
}

static unsigned v850e_uart_get_mctrl (struct uart_port *port)
{
	/* We don't support DCD or DSR, so consider them permanently active. */
	int mctrl = TIOCM_CAR | TIOCM_DSR;

	/* We may support CTS.  */
#ifdef V850E_UART_CTS
	mctrl |= V850E_UART_CTS(port->line) ? TIOCM_CTS : 0;
#else
	mctrl |= TIOCM_CTS;
#endif

	return mctrl;
}

static void v850e_uart_start_tx (struct uart_port *port)
{
	v850e_intc_disable_irq (V850E_UART_TX_IRQ (port->line));
	v850e_uart_tx (port);
	v850e_intc_enable_irq (V850E_UART_TX_IRQ (port->line));
}

static void v850e_uart_stop_tx (struct uart_port *port)
{
	v850e_intc_disable_irq (V850E_UART_TX_IRQ (port->line));
}

static void v850e_uart_start_rx (struct uart_port *port)
{
	v850e_intc_enable_irq (V850E_UART_RX_IRQ (port->line));
}

static void v850e_uart_stop_rx (struct uart_port *port)
{
	v850e_intc_disable_irq (V850E_UART_RX_IRQ (port->line));
}

static void v850e_uart_break_ctl (struct uart_port *port, int break_ctl)
{
	/* Umm, do this later.  */
}

static int v850e_uart_startup (struct uart_port *port)
{
	int err;

	/* Alloc RX irq.  */
	err = request_irq (V850E_UART_RX_IRQ (port->line), v850e_uart_rx_irq,
			   SA_INTERRUPT, "v850e_uart", port);
	if (err)
		return err;

	/* Alloc TX irq.  */
	err = request_irq (V850E_UART_TX_IRQ (port->line), v850e_uart_tx_irq,
			   SA_INTERRUPT, "v850e_uart", port);
	if (err) {
		free_irq (V850E_UART_RX_IRQ (port->line), port);
		return err;
	}

	v850e_uart_start_rx (port);

	return 0;
}

static void v850e_uart_shutdown (struct uart_port *port)
{
	/* Disable port interrupts.  */
	free_irq (V850E_UART_TX_IRQ (port->line), port);
	free_irq (V850E_UART_RX_IRQ (port->line), port);

	/* Turn off xmit/recv enable bits.  */
	V850E_UART_CONFIG (port->line)
		&= ~(V850E_UART_CONFIG_TX_ENABLE
		     | V850E_UART_CONFIG_RX_ENABLE);
	/* Then reset the channel.  */
	V850E_UART_CONFIG (port->line) = 0;
}

static void
v850e_uart_set_termios (struct uart_port *port, struct termios *termios,
		        struct termios *old)
{
	unsigned cflags = termios->c_cflag;

	/* Restrict flags to legal values.  */
	if ((cflags & CSIZE) != CS7 && (cflags & CSIZE) != CS8)
		/* The new value of CSIZE is invalid, use the old value.  */
		cflags = (cflags & ~CSIZE)
			| (old ? (old->c_cflag & CSIZE) : CS8);

	termios->c_cflag = cflags;

	v850e_uart_configure (port->line, cflags,
			      uart_get_baud_rate (port, termios, old,
						  v850e_uart_min_baud(),
						  v850e_uart_max_baud()));
}

static const char *v850e_uart_type (struct uart_port *port)
{
	return port->type == PORT_V850E_UART ? "v850e_uart" : 0;
}

static void v850e_uart_config_port (struct uart_port *port, int flags)
{
	if (flags & UART_CONFIG_TYPE)
		port->type = PORT_V850E_UART;
}

static int
v850e_uart_verify_port (struct uart_port *port, struct serial_struct *ser)
{
	if (ser->type != PORT_UNKNOWN && ser->type != PORT_V850E_UART)
		return -EINVAL;
	if (ser->irq != V850E_UART_TX_IRQ (port->line))
		return -EINVAL;
	return 0;
}

static struct uart_ops v850e_uart_ops = {
	.tx_empty	= v850e_uart_tx_empty,
	.get_mctrl	= v850e_uart_get_mctrl,
	.set_mctrl	= v850e_uart_set_mctrl,
	.start_tx	= v850e_uart_start_tx,
	.stop_tx	= v850e_uart_stop_tx,
	.stop_rx	= v850e_uart_stop_rx,
	.enable_ms	= v850e_uart_nop,
	.break_ctl	= v850e_uart_break_ctl,
	.startup	= v850e_uart_startup,
	.shutdown	= v850e_uart_shutdown,
	.set_termios	= v850e_uart_set_termios,
	.type		= v850e_uart_type,
	.release_port	= v850e_uart_nop,
	.request_port	= v850e_uart_success,
	.config_port	= v850e_uart_config_port,
	.verify_port	= v850e_uart_verify_port,
};

/* Initialization and cleanup.  */

static struct uart_driver v850e_uart_driver = {
	.owner			= THIS_MODULE,
	.driver_name		= "v850e_uart",
	.devfs_name		= "tts/",
	.dev_name		= "ttyS",
	.major			= TTY_MAJOR,
	.minor			= V850E_UART_MINOR_BASE,
	.nr			= V850E_UART_NUM_CHANNELS,
	.cons			= V850E_UART_CONSOLE,
};


static struct uart_port v850e_uart_ports[V850E_UART_NUM_CHANNELS];

static int __init v850e_uart_init (void)
{
	int rval;

	printk (KERN_INFO "%s on-chip UART\n", V850E_UART_CHIP_NAME);

	rval = uart_register_driver (&v850e_uart_driver);
	if (rval == 0) {
		unsigned chan;

		for (chan = 0; chan < V850E_UART_NUM_CHANNELS; chan++) {
			struct uart_port *port = &v850e_uart_ports[chan];
			
			memset (port, 0, sizeof *port);

			port->ops = &v850e_uart_ops;
			port->line = chan;
			port->iotype = SERIAL_IO_MEM;
			port->flags = UPF_BOOT_AUTOCONF;

			/* We actually use multiple IRQs, but the serial
			   framework seems to mainly use this for
			   informational purposes anyway.  Here we use the TX
			   irq.  */
			port->irq = V850E_UART_TX_IRQ (chan);

			/* The serial framework doesn't really use these
			   membase/mapbase fields for anything useful, but
			   it requires that they be something non-zero to
			   consider the port `valid', and also uses them
			   for informational purposes.  */
			port->membase = (void *)V850E_UART_BASE_ADDR (chan);
			port->mapbase = V850E_UART_BASE_ADDR (chan);

			/* The framework insists on knowing the uart's master
			   clock freq, though it doesn't seem to do anything
			   useful for us with it.  We must make it at least
			   higher than (the maximum baud rate * 16), otherwise
			   the framework will puke during its internal
			   calculations, and force the baud rate to be 9600.
			   To be accurate though, just repeat the calculation
			   we use when actually setting the speed.  */
			port->uartclk = v850e_uart_max_clock() * 16;

			uart_add_one_port (&v850e_uart_driver, port);
		}
	}

	return rval;
}

static void __exit v850e_uart_exit (void)
{
	unsigned chan;

	for (chan = 0; chan < V850E_UART_NUM_CHANNELS; chan++)
		uart_remove_one_port (&v850e_uart_driver,
				      &v850e_uart_ports[chan]);

	uart_unregister_driver (&v850e_uart_driver);
}

module_init (v850e_uart_init);
module_exit (v850e_uart_exit);

MODULE_AUTHOR ("Miles Bader");
MODULE_DESCRIPTION ("NEC " V850E_UART_CHIP_NAME " on-chip UART");
MODULE_LICENSE ("GPL");