aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/wan/sdlamain.c
blob: 7a8b22a7ea31e9f58660b4cad62b17d1ff6b1c09 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
1240
1241
1242
1243
1244
1245
1246
1247
1248
1249
1250
1251
1252
1253
1254
1255
1256
1257
1258
1259
1260
1261
1262
1263
1264
1265
1266
1267
1268
1269
1270
1271
1272
1273
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
1289
1290
1291
1292
1293
1294
1295
1296
1297
1298
1299
1300
1301
1302
1303
1304
1305
1306
1307
1308
1309
1310
1311
1312
1313
1314
1315
1316
1317
1318
1319
1320
1321
1322
1323
1324
1325
1326
1327
1328
1329
1330
1331
1332
1333
1334
1335
1336
1337
1338
1339
1340
1341
1342
1343
1344
1345
1346
/****************************************************************************
* sdlamain.c	WANPIPE(tm) Multiprotocol WAN Link Driver.  Main module.
*
* Author:	Nenad Corbic	<ncorbic@sangoma.com>
*		Gideon Hack	
*
* Copyright:	(c) 1995-2000 Sangoma Technologies Inc.
*
*		This program is free software; you can redistribute it and/or
*		modify it under the terms of the GNU General Public License
*		as published by the Free Software Foundation; either version
*		2 of the License, or (at your option) any later version.
* ============================================================================
* Dec 22, 2000  Nenad Corbic	Updated for 2.4.X kernels.
* 				Removed the polling routine.
* Nov 13, 2000  Nenad Corbic	Added hw probing on module load and dynamic
* 				device allocation. 
* Nov 7,  2000  Nenad Corbic	Fixed the Multi-Port PPP for kernels
*                               2.2.16 and above.
* Aug 2,  2000  Nenad Corbic	Block the Multi-Port PPP from running on
*  			        kernels 2.2.16 or greater.  The SyncPPP 
*  			        has changed.
* Jul 25, 2000  Nenad Corbic	Updated the Piggiback support for MultPPPP.
* Jul 13, 2000	Nenad Corbic	Added Multi-PPP support.
* Feb 02, 2000  Nenad Corbic    Fixed up piggyback probing and selection.
* Sep 23, 1999  Nenad Corbic    Added support for SMP
* Sep 13, 1999  Nenad Corbic	Each port is treated as a separate device.
* Jun 02, 1999  Gideon Hack     Added support for the S514 adapter.
*				Updates for Linux 2.2.X kernels.
* Sep 17, 1998	Jaspreet Singh	Updated for 2.1.121+ kernel
* Nov 28, 1997	Jaspreet Singh	Changed DRV_RELEASE to 1
* Nov 10, 1997	Jaspreet Singh	Changed sti() to restore_flags();
* Nov 06, 1997 	Jaspreet Singh	Changed DRV_VERSION to 4 and DRV_RELEASE to 0
* Oct 20, 1997 	Jaspreet Singh	Modified sdla_isr routine so that card->in_isr
*				assignments are taken out and placed in the
*				sdla_ppp.c, sdla_fr.c and sdla_x25.c isr
*				routines. Took out 'wandev->tx_int_enabled' and
*				replaced it with 'wandev->enable_tx_int'. 
* May 29, 1997	Jaspreet Singh	Flow Control Problem
*				added "wandev->tx_int_enabled=1" line in the
*				init module. This line initializes the flag for 
*				preventing Interrupt disabled with device set to
*				busy
* Jan 15, 1997	Gene Kozin	Version 3.1.0
*				 o added UDP management stuff
* Jan 02, 1997	Gene Kozin	Initial version.
*****************************************************************************/

#include <linux/config.h>	/* OS configuration options */
#include <linux/stddef.h>	/* offsetof(), etc. */
#include <linux/errno.h>	/* return codes */
#include <linux/string.h>	/* inline memset(), etc. */
#include <linux/init.h>
#include <linux/slab.h>	/* kmalloc(), kfree() */
#include <linux/kernel.h>	/* printk(), and other useful stuff */
#include <linux/module.h>	/* support for loadable modules */
#include <linux/ioport.h>	/* request_region(), release_region() */
#include <linux/wanrouter.h>	/* WAN router definitions */
#include <linux/wanpipe.h>	/* WANPIPE common user API definitions */
#include <linux/rcupdate.h>

#include <linux/in.h>
#include <asm/io.h>		/* phys_to_virt() */
#include <linux/pci.h>
#include <linux/sdlapci.h>
#include <linux/if_wanpipe_common.h>

#include <asm/uaccess.h>	/* kernel <-> user copy */
#include <linux/inetdevice.h>

#include <linux/ip.h>
#include <net/route.h>
 
#define KMEM_SAFETYZONE 8


#ifndef CONFIG_WANPIPE_FR
  #define wpf_init(a,b) (-EPROTONOSUPPORT) 
#endif

#ifndef CONFIG_WANPIPE_CHDLC
 #define wpc_init(a,b) (-EPROTONOSUPPORT) 
#endif

#ifndef CONFIG_WANPIPE_X25
 #define wpx_init(a,b) (-EPROTONOSUPPORT) 
#endif
 
#ifndef CONFIG_WANPIPE_PPP
 #define wpp_init(a,b) (-EPROTONOSUPPORT) 
#endif

#ifndef CONFIG_WANPIPE_MULTPPP 
 #define wsppp_init(a,b) (-EPROTONOSUPPORT) 
#endif
 
 
/***********FOR DEBUGGING PURPOSES*********************************************
static void * dbg_kmalloc(unsigned int size, int prio, int line) {
	int i = 0;
	void * v = kmalloc(size+sizeof(unsigned int)+2*KMEM_SAFETYZONE*8,prio);
	char * c1 = v;	
	c1 += sizeof(unsigned int);
	*((unsigned int *)v) = size;

	for (i = 0; i < KMEM_SAFETYZONE; i++) {
		c1[0] = 'D'; c1[1] = 'E'; c1[2] = 'A'; c1[3] = 'D';
		c1[4] = 'B'; c1[5] = 'E'; c1[6] = 'E'; c1[7] = 'F';
		c1 += 8;
	}
	c1 += size;
	for (i = 0; i < KMEM_SAFETYZONE; i++) {
		c1[0] = 'M'; c1[1] = 'U'; c1[2] = 'N'; c1[3] = 'G';
		c1[4] = 'W'; c1[5] = 'A'; c1[6] = 'L'; c1[7] = 'L';
		c1 += 8;
	}
	v = ((char *)v) + sizeof(unsigned int) + KMEM_SAFETYZONE*8;
	printk(KERN_INFO "line %d  kmalloc(%d,%d) = %p\n",line,size,prio,v);
	return v;
}
static void dbg_kfree(void * v, int line) {
	unsigned int * sp = (unsigned int *)(((char *)v) - (sizeof(unsigned int) + KMEM_SAFETYZONE*8));
	unsigned int size = *sp;
	char * c1 = ((char *)v) - KMEM_SAFETYZONE*8;
	int i = 0;
	for (i = 0; i < KMEM_SAFETYZONE; i++) {
		if (   c1[0] != 'D' || c1[1] != 'E' || c1[2] != 'A' || c1[3] != 'D'
		    || c1[4] != 'B' || c1[5] != 'E' || c1[6] != 'E' || c1[7] != 'F') {
			printk(KERN_INFO "kmalloced block at %p has been corrupted (underrun)!\n",v);
			printk(KERN_INFO " %4x: %2x %2x %2x %2x %2x %2x %2x %2x\n", i*8,
			                c1[0],c1[1],c1[2],c1[3],c1[4],c1[5],c1[6],c1[7] );
		}
		c1 += 8;
	}
	c1 += size;
	for (i = 0; i < KMEM_SAFETYZONE; i++) {
		if (   c1[0] != 'M' || c1[1] != 'U' || c1[2] != 'N' || c1[3] != 'G'
		    || c1[4] != 'W' || c1[5] != 'A' || c1[6] != 'L' || c1[7] != 'L'
		   ) {
			printk(KERN_INFO "kmalloced block at %p has been corrupted (overrun):\n",v);
			printk(KERN_INFO " %4x: %2x %2x %2x %2x %2x %2x %2x %2x\n", i*8,
			                c1[0],c1[1],c1[2],c1[3],c1[4],c1[5],c1[6],c1[7] );
		}
		c1 += 8;
	}
	printk(KERN_INFO "line %d  kfree(%p)\n",line,v);
	v = ((char *)v) - (sizeof(unsigned int) + KMEM_SAFETYZONE*8);
	kfree(v);
}

#define kmalloc(x,y) dbg_kmalloc(x,y,__LINE__)
#define kfree(x) dbg_kfree(x,__LINE__)
******************************************************************************/



/****** Defines & Macros ****************************************************/

#ifdef	_DEBUG_
#define	STATIC
#else
#define	STATIC		static
#endif

#define	DRV_VERSION	5		/* version number */
#define	DRV_RELEASE	0		/* release (minor version) number */
#define	MAX_CARDS	16		/* max number of adapters */

#ifndef	CONFIG_WANPIPE_CARDS		/* configurable option */
#define	CONFIG_WANPIPE_CARDS 1
#endif

#define	CMD_OK		0		/* normal firmware return code */
#define	CMD_TIMEOUT	0xFF		/* firmware command timed out */
#define	MAX_CMD_RETRY	10		/* max number of firmware retries */
/****** Function Prototypes *************************************************/

extern void disable_irq(unsigned int);
extern void enable_irq(unsigned int);
 
/* WAN link driver entry points */
static int setup(struct wan_device* wandev, wandev_conf_t* conf);
static int shutdown(struct wan_device* wandev);
static int ioctl(struct wan_device* wandev, unsigned cmd, unsigned long arg);

/* IOCTL handlers */
static int ioctl_dump	(sdla_t* card, sdla_dump_t* u_dump);
static int ioctl_exec	(sdla_t* card, sdla_exec_t* u_exec, int);

/* Miscellaneous functions */
STATIC irqreturn_t sdla_isr	(int irq, void* dev_id, struct pt_regs *regs);
static void release_hw  (sdla_t *card);

static int check_s508_conflicts (sdla_t* card,wandev_conf_t* conf, int*);
static int check_s514_conflicts (sdla_t* card,wandev_conf_t* conf, int*);


/****** Global Data **********************************************************
 * Note: All data must be explicitly initialized!!!
 */

/* private data */
static char drvname[]	= "wanpipe";
static char fullname[]	= "WANPIPE(tm) Multiprotocol Driver";
static char copyright[]	= "(c) 1995-2000 Sangoma Technologies Inc.";
static int ncards; 
static sdla_t* card_array;		/* adapter data space */

/* Wanpipe's own workqueue, used for all API's.
 * All protocol specific tasks will be inserted
 * into the "wanpipe_wq" workqueue. 

 * The kernel workqueue mechanism will execute
 * all pending tasks in the "wanpipe_wq" workqueue.
 */

struct workqueue_struct *wanpipe_wq;
DECLARE_WORK(wanpipe_work, NULL, NULL);

static int wanpipe_bh_critical;

/******* Kernel Loadable Module Entry Points ********************************/

/*============================================================================
 * Module 'insert' entry point.
 * o print announcement
 * o allocate adapter data space
 * o initialize static data
 * o register all cards with WAN router
 * o calibrate SDLA shared memory access delay.
 *
 * Return:	0	Ok
 *		< 0	error.
 * Context:	process
 */
 
static int __init wanpipe_init(void)
{
	int cnt, err = 0;

	printk(KERN_INFO "%s v%u.%u %s\n",
		fullname, DRV_VERSION, DRV_RELEASE, copyright);

	wanpipe_wq = create_workqueue("wanpipe_wq");
	if (!wanpipe_wq)
		return -ENOMEM;

	/* Probe for wanpipe cards and return the number found */
	printk(KERN_INFO "wanpipe: Probing for WANPIPE hardware.\n");
	ncards = wanpipe_hw_probe();
	if (ncards){
		printk(KERN_INFO "wanpipe: Allocating maximum %i devices: wanpipe%i - wanpipe%i.\n",ncards,1,ncards);
	}else{
		printk(KERN_INFO "wanpipe: No S514/S508 cards found, unloading modules!\n");
		destroy_workqueue(wanpipe_wq);
		return -ENODEV;
	}
	
	/* Verify number of cards and allocate adapter data space */
	card_array = kmalloc(sizeof(sdla_t) * ncards, GFP_KERNEL);
	if (card_array == NULL) {
		destroy_workqueue(wanpipe_wq);
		return -ENOMEM;
	}

	memset(card_array, 0, sizeof(sdla_t) * ncards);

	/* Register adapters with WAN router */
	for (cnt = 0; cnt < ncards; ++ cnt) {
		sdla_t* card = &card_array[cnt];
		struct wan_device* wandev = &card->wandev;

		card->next = NULL;
		sprintf(card->devname, "%s%d", drvname, cnt + 1);
		wandev->magic    = ROUTER_MAGIC;
		wandev->name     = card->devname;
		wandev->private  = card;
		wandev->enable_tx_int = 0;
		wandev->setup    = &setup;
		wandev->shutdown = &shutdown;
		wandev->ioctl    = &ioctl;
		err = register_wan_device(wandev);
		if (err) {
			printk(KERN_INFO
				"%s: %s registration failed with error %d!\n",
				drvname, card->devname, err);
			break;
		}
	}
	if (cnt){
		ncards = cnt;	/* adjust actual number of cards */
	}else {
		kfree(card_array);
		destroy_workqueue(wanpipe_wq);
		printk(KERN_INFO "IN Init Module: NO Cards registered\n");
		err = -ENODEV;
	}

	return err;
}

/*============================================================================
 * Module 'remove' entry point.
 * o unregister all adapters from the WAN router
 * o release all remaining system resources
 */
static void __exit wanpipe_cleanup(void)
{
	int i;

	if (!ncards)
		return;
		
	for (i = 0; i < ncards; ++i) {
		sdla_t* card = &card_array[i];
		unregister_wan_device(card->devname);
	}
	destroy_workqueue(wanpipe_wq);
	kfree(card_array);

	printk(KERN_INFO "\nwanpipe: WANPIPE Modules Unloaded.\n");
}

module_init(wanpipe_init);
module_exit(wanpipe_cleanup);

/******* WAN Device Driver Entry Points *************************************/

/*============================================================================
 * Setup/configure WAN link driver.
 * o check adapter state
 * o make sure firmware is present in configuration
 * o make sure I/O port and IRQ are specified
 * o make sure I/O region is available
 * o allocate interrupt vector
 * o setup SDLA hardware
 * o call appropriate routine to perform protocol-specific initialization
 * o mark I/O region as used
 * o if this is the first active card, then schedule background task
 *
 * This function is called when router handles ROUTER_SETUP IOCTL. The
 * configuration structure is in kernel memory (including extended data, if
 * any).
 */
 
static int setup(struct wan_device* wandev, wandev_conf_t* conf)
{
	sdla_t* card;
	int err = 0;
	int irq=0;

	/* Sanity checks */
	if ((wandev == NULL) || (wandev->private == NULL) || (conf == NULL)){
		printk(KERN_INFO 
		      "%s: Failed Sdlamain Setup wandev %u, card %u, conf %u !\n",
		      wandev->name,
		      (unsigned int)wandev,(unsigned int)wandev->private,
		      (unsigned int)conf); 
		return -EFAULT;
	}

	printk(KERN_INFO "%s: Starting WAN Setup\n", wandev->name);

	card = wandev->private;
	if (wandev->state != WAN_UNCONFIGURED){
		printk(KERN_INFO "%s: failed sdlamain setup, busy!\n",
			wandev->name);
		return -EBUSY;		/* already configured */
	}

	printk(KERN_INFO "\nProcessing WAN device %s...\n", wandev->name);

	/* Initialize the counters for each wandev 
	 * Used for counting number of times new_if and 
         * del_if get called.
	 */
	wandev->del_if_cnt = 0;
	wandev->new_if_cnt = 0;
	wandev->config_id  = conf->config_id;

	if (!conf->data_size || (conf->data == NULL)) {
		printk(KERN_INFO
			"%s: firmware not found in configuration data!\n",
			wandev->name);
		return -EINVAL;
	}

	/* Check for resource conflicts and setup the
	 * card for piggibacking if necessary */
	if(!conf->S514_CPU_no[0]) {
		if ((err=check_s508_conflicts(card,conf,&irq)) != 0){
			return err;
		}
	}else {
		if ((err=check_s514_conflicts(card,conf,&irq)) != 0){
			return err;
		}
	}

	/* If the current card has already been configured
         * or it's a piggyback card, do not try to allocate
         * resources.
	 */
	if (!card->wandev.piggyback && !card->configured){

		/* Configure hardware, load firmware, etc. */
		memset(&card->hw, 0, sizeof(sdlahw_t));

		/* for an S514 adapter, pass the CPU number and the slot number read */
		/* from 'router.conf' to the 'sdla_setup()' function via the 'port' */
		/* parameter */
		if (conf->S514_CPU_no[0]){

			card->hw.S514_cpu_no[0] = conf->S514_CPU_no[0];
			card->hw.S514_slot_no = conf->PCI_slot_no;
			card->hw.auto_pci_cfg = conf->auto_pci_cfg;

			if (card->hw.auto_pci_cfg == WANOPT_YES){
				printk(KERN_INFO "%s: Setting CPU to %c and Slot to Auto\n",
				card->devname, card->hw.S514_cpu_no[0]);
			}else{
				printk(KERN_INFO "%s: Setting CPU to %c and Slot to %i\n",
				card->devname, card->hw.S514_cpu_no[0], card->hw.S514_slot_no);
			}

		}else{
			/* 508 Card io port and irq initialization */
			card->hw.port = conf->ioport;
			card->hw.irq = (conf->irq == 9) ? 2 : conf->irq;
		}


		/* Compute the virtual address of the card in kernel space */
		if(conf->maddr){
			card->hw.dpmbase = phys_to_virt(conf->maddr);
		}else{	
			card->hw.dpmbase = (void *)conf->maddr;
		}
			
		card->hw.dpmsize = SDLA_WINDOWSIZE;
		
		/* set the adapter type if using an S514 adapter */
		card->hw.type = (conf->S514_CPU_no[0]) ? SDLA_S514 : conf->hw_opt[0]; 
		card->hw.pclk = conf->hw_opt[1];

		err = sdla_setup(&card->hw, conf->data, conf->data_size);
		if (err){
			printk(KERN_INFO "%s: Hardware setup Failed %i\n",
					card->devname,err);
			return err;
		}

	        if(card->hw.type != SDLA_S514)
			irq = (conf->irq == 2) ? 9 : conf->irq; /* IRQ2 -> IRQ9 */
		else
			irq = card->hw.irq;

		/* request an interrupt vector - note that interrupts may be shared */
		/* when using the S514 PCI adapter */
		
       		if(request_irq(irq, sdla_isr, 
		      (card->hw.type == SDLA_S514) ? SA_SHIRQ : 0, 
		       wandev->name, card)){

			printk(KERN_INFO "%s: Can't reserve IRQ %d!\n", wandev->name, irq);
			return -EINVAL;
		}

	}else{
		printk(KERN_INFO "%s: Card Configured %lu or Piggybacking %i!\n",
			wandev->name,card->configured,card->wandev.piggyback);
	} 


	if (!card->configured){

		/* Initialize the Spin lock */
		printk(KERN_INFO "%s: Initializing for SMP\n",wandev->name);

		/* Piggyback spin lock has already been initialized,
		 * in check_s514/s508_conflicts() */
		if (!card->wandev.piggyback){
			spin_lock_init(&card->wandev.lock);
		}
		
		/* Intialize WAN device data space */
		wandev->irq       = irq;
		wandev->dma       = 0;
		if(card->hw.type != SDLA_S514){ 
			wandev->ioport = card->hw.port;
		}else{
			wandev->S514_cpu_no[0] = card->hw.S514_cpu_no[0];
			wandev->S514_slot_no = card->hw.S514_slot_no;
		}
		wandev->maddr     = (unsigned long)card->hw.dpmbase;
		wandev->msize     = card->hw.dpmsize;
		wandev->hw_opt[0] = card->hw.type;
		wandev->hw_opt[1] = card->hw.pclk;
		wandev->hw_opt[2] = card->hw.memory;
		wandev->hw_opt[3] = card->hw.fwid;
	}

	/* Protocol-specific initialization */
	switch (card->hw.fwid) {

	case SFID_X25_502:
	case SFID_X25_508:
		printk(KERN_INFO "%s: Starting X.25 Protocol Init.\n",
				card->devname);
		err = wpx_init(card, conf);
		break;
	case SFID_FR502:
	case SFID_FR508:
		printk(KERN_INFO "%s: Starting Frame Relay Protocol Init.\n",
				card->devname);
		err = wpf_init(card, conf);
		break;
	case SFID_PPP502:
	case SFID_PPP508:
		printk(KERN_INFO "%s: Starting PPP Protocol Init.\n",
				card->devname);
		err = wpp_init(card, conf);
		break;
		
	case SFID_CHDLC508:
	case SFID_CHDLC514:
		if (conf->ft1){		
			printk(KERN_INFO "%s: Starting FT1 CSU/DSU Config Driver.\n",
				card->devname);
			err = wpft1_init(card, conf);
			break;
			
		}else if (conf->config_id == WANCONFIG_MPPP){
			printk(KERN_INFO "%s: Starting Multi-Port PPP Protocol Init.\n",
					card->devname);
			err = wsppp_init(card,conf);
			break;

		}else{
			printk(KERN_INFO "%s: Starting CHDLC Protocol Init.\n",
					card->devname);
			err = wpc_init(card, conf);
			break;
		}
	default:
		printk(KERN_INFO "%s: Error, Firmware is not supported %X %X!\n",
			wandev->name,card->hw.fwid,SFID_CHDLC508);
		err = -EPROTONOSUPPORT;
	}

	if (err != 0){
		if (err == -EPROTONOSUPPORT){
			printk(KERN_INFO 
				"%s: Error, Protocol selected has not been compiled!\n",
					card->devname);
			printk(KERN_INFO 
				"%s:        Re-configure the kernel and re-build the modules!\n",
					card->devname);
		}
		
		release_hw(card);
		wandev->state = WAN_UNCONFIGURED;
		return err;
	}


  	/* Reserve I/O region and schedule background task */
        if(card->hw.type != SDLA_S514 && !card->wandev.piggyback)
		if (!request_region(card->hw.port, card->hw.io_range, 
				wandev->name)) {
			printk(KERN_WARNING "port 0x%04x busy\n", card->hw.port);
			release_hw(card);
			wandev->state = WAN_UNCONFIGURED;
			return -EBUSY;
	  }

	/* Only use the polling routine for the X25 protocol */
	
	card->wandev.critical=0;
	return 0;
}

/*================================================================== 
 * configure_s508_card
 * 
 * For a S508 adapter, check for a possible configuration error in that
 * we are loading an adapter in the same IO port as a previously loaded S508
 * card.
 */ 

static int check_s508_conflicts (sdla_t* card,wandev_conf_t* conf, int *irq)
{
	unsigned long smp_flags;
	int i;
	
	if (conf->ioport <= 0) {
		printk(KERN_INFO
		"%s: can't configure without I/O port address!\n",
		card->wandev.name);
		return -EINVAL;
	}

	if (conf->irq <= 0) {
		printk(KERN_INFO "%s: can't configure without IRQ!\n",
		card->wandev.name);
		return -EINVAL;
	}

	if (test_bit(0,&card->configured))
		return 0;


	/* Check for already loaded card with the same IO port and IRQ 
	 * If found, copy its hardware configuration and use its
	 * resources (i.e. piggybacking)
	 */
	
	for (i = 0; i < ncards; i++) {
		sdla_t *nxt_card = &card_array[i];

		/* Skip the current card ptr */
		if (nxt_card == card)	
			continue;


		/* Find a card that is already configured with the
		 * same IO Port */
		if ((nxt_card->hw.type == SDLA_S508) &&
		    (nxt_card->hw.port == conf->ioport) && 
		    (nxt_card->next == NULL)){
			
			/* We found a card the card that has same configuration
			 * as us. This means, that we must setup this card in 
			 * piggibacking mode. However, only CHDLC and MPPP protocol
			 * support this setup */
		
			if ((conf->config_id == WANCONFIG_CHDLC || 
			     conf->config_id == WANCONFIG_MPPP) &&
			    (nxt_card->wandev.config_id == WANCONFIG_CHDLC || 
			     nxt_card->wandev.config_id == WANCONFIG_MPPP)){ 
				
				*irq = nxt_card->hw.irq;
				memcpy(&card->hw, &nxt_card->hw, sizeof(sdlahw_t));
			
				/* The master could already be running, we must
				 * set this as a critical area */
				lock_adapter_irq(&nxt_card->wandev.lock, &smp_flags);

				nxt_card->next = card;
				card->next = nxt_card;

				card->wandev.piggyback = WANOPT_YES;

				/* We must initialise the piggiback spin lock here
				 * since isr will try to lock card->next if it
				 * exists */
				spin_lock_init(&card->wandev.lock);
				
				unlock_adapter_irq(&nxt_card->wandev.lock, &smp_flags);
				break;
			}else{
				/* Trying to run piggibacking with a wrong protocol */
				printk(KERN_INFO "%s: ERROR: Resource busy, ioport: 0x%x\n"
						 "%s:        This protocol doesn't support\n"
						 "%s:        multi-port operation!\n",
						 card->devname,nxt_card->hw.port,
						 card->devname,card->devname);
				return -EEXIST;
			}
		}
	}
	

	/* Make sure I/O port region is available only if we are the
	 * master device.  If we are running in piggybacking mode, 
	 * we will use the resources of the master card. */
	if (!card->wandev.piggyback) {
		struct resource *rr =
			request_region(conf->ioport, SDLA_MAXIORANGE, "sdlamain");
		release_region(conf->ioport, SDLA_MAXIORANGE);

		if (!rr) {
			printk(KERN_INFO
				"%s: I/O region 0x%X - 0x%X is in use!\n",
				card->wandev.name, conf->ioport,
				conf->ioport + SDLA_MAXIORANGE - 1);
			return -EINVAL;
		}
	}

	return 0;
}

/*================================================================== 
 * configure_s514_card
 * 
 * For a S514 adapter, check for a possible configuration error in that
 * we are loading an adapter in the same slot as a previously loaded S514
 * card.
 */ 


static int check_s514_conflicts(sdla_t* card,wandev_conf_t* conf, int *irq)
{
	unsigned long smp_flags;
	int i;
	
	if (test_bit(0,&card->configured))
		return 0;

	
	/* Check for already loaded card with the same IO port and IRQ 
	 * If found, copy its hardware configuration and use its
	 * resources (i.e. piggybacking)
	 */

	for (i = 0; i < ncards; i ++) {
	
		sdla_t* nxt_card = &card_array[i];
		if(nxt_card == card)
			continue;
		
		if((nxt_card->hw.type == SDLA_S514) &&
		   (nxt_card->hw.S514_slot_no == conf->PCI_slot_no) &&
		   (nxt_card->hw.S514_cpu_no[0] == conf->S514_CPU_no[0])&&
		   (nxt_card->next == NULL)){


			if ((conf->config_id == WANCONFIG_CHDLC || 
			     conf->config_id == WANCONFIG_MPPP) &&
			    (nxt_card->wandev.config_id == WANCONFIG_CHDLC || 
			     nxt_card->wandev.config_id == WANCONFIG_MPPP)){ 
				
				*irq = nxt_card->hw.irq;
				memcpy(&card->hw, &nxt_card->hw, sizeof(sdlahw_t));
	
				/* The master could already be running, we must
				 * set this as a critical area */
				lock_adapter_irq(&nxt_card->wandev.lock,&smp_flags);
				nxt_card->next = card;
				card->next = nxt_card;

				card->wandev.piggyback = WANOPT_YES;

				/* We must initialise the piggiback spin lock here
				 * since isr will try to lock card->next if it
				 * exists */
				spin_lock_init(&card->wandev.lock);

				unlock_adapter_irq(&nxt_card->wandev.lock,&smp_flags);

			}else{
				/* Trying to run piggibacking with a wrong protocol */
				printk(KERN_INFO "%s: ERROR: Resource busy: CPU %c PCISLOT %i\n"
						 "%s:        This protocol doesn't support\n"
						 "%s:        multi-port operation!\n",
						 card->devname,
						 conf->S514_CPU_no[0],conf->PCI_slot_no,
						 card->devname,card->devname);
				return -EEXIST;
			}
		}
	}

	return 0;
}



/*============================================================================
 * Shut down WAN link driver. 
 * o shut down adapter hardware
 * o release system resources.
 *
 * This function is called by the router when device is being unregistered or
 * when it handles ROUTER_DOWN IOCTL.
 */
static int shutdown(struct wan_device* wandev)
{
	sdla_t *card;
	int err=0;
	
	/* sanity checks */
	if ((wandev == NULL) || (wandev->private == NULL)){
		return -EFAULT;
	}
		
	if (wandev->state == WAN_UNCONFIGURED){
		return 0;
	}

	card = wandev->private;

	if (card->tty_opt){
		if (card->tty_open){
			printk(KERN_INFO 
				"%s: Shutdown Failed: TTY is still open\n",
				  card->devname);
			return -EBUSY;
		}
	}
	
	wandev->state = WAN_UNCONFIGURED;

	set_bit(PERI_CRIT,(void*)&wandev->critical);
	
	/* In case of piggibacking, make sure that 
         * we never try to shutdown both devices at the same
         * time, because they depend on one another */
	
	if (card->disable_comm){
		card->disable_comm(card);
	}

	/* Release Resources */
	release_hw(card);

        /* only free the allocated I/O range if not an S514 adapter */
	if (wandev->hw_opt[0] != SDLA_S514 && !card->configured){
              	release_region(card->hw.port, card->hw.io_range);
	}

	if (!card->configured){
		memset(&card->hw, 0, sizeof(sdlahw_t));
	      	if (card->next){
			memset(&card->next->hw, 0, sizeof(sdlahw_t));
		}
	}
	

	clear_bit(PERI_CRIT,(void*)&wandev->critical);
	return err;
}

static void release_hw (sdla_t *card)
{
	sdla_t *nxt_card;

	
	/* Check if next device exists */
	if (card->next){
		nxt_card = card->next;
		/* If next device is down then release resources */
		if (nxt_card->wandev.state == WAN_UNCONFIGURED){
			if (card->wandev.piggyback){
				/* If this device is piggyback then use
                                 * information of the master device 
				 */
				printk(KERN_INFO "%s: Piggyback shutting down\n",card->devname);
				sdla_down(&card->next->hw);
       				free_irq(card->wandev.irq, card->next);
				card->configured = 0;
				card->next->configured = 0;
				card->wandev.piggyback = 0;
			}else{
				/* Master device shutting down */
				printk(KERN_INFO "%s: Master shutting down\n",card->devname);
				sdla_down(&card->hw);
				free_irq(card->wandev.irq, card);
				card->configured = 0;
				card->next->configured = 0;
			}
		}else{
			printk(KERN_INFO "%s: Device still running %i\n",
				nxt_card->devname,nxt_card->wandev.state);

			card->configured = 1;
		}
	}else{
		printk(KERN_INFO "%s: Master shutting down\n",card->devname);
		sdla_down(&card->hw);
       		free_irq(card->wandev.irq, card);
		card->configured = 0;
	}
	return;
}


/*============================================================================
 * Driver I/O control. 
 * o verify arguments
 * o perform requested action
 *
 * This function is called when router handles one of the reserved user
 * IOCTLs.  Note that 'arg' stil points to user address space.
 */
static int ioctl(struct wan_device* wandev, unsigned cmd, unsigned long arg)
{
	sdla_t* card;
	int err;

	/* sanity checks */
	if ((wandev == NULL) || (wandev->private == NULL))
		return -EFAULT;
	if (wandev->state == WAN_UNCONFIGURED)
		return -ENODEV;

	card = wandev->private;

	if(card->hw.type != SDLA_S514){
		disable_irq(card->hw.irq);
	}

	if (test_bit(SEND_CRIT, (void*)&wandev->critical)) {
		return -EAGAIN;
	}
	
	switch (cmd) {
	case WANPIPE_DUMP:
		err = ioctl_dump(wandev->private, (void*)arg);
		break;

	case WANPIPE_EXEC:
		err = ioctl_exec(wandev->private, (void*)arg, cmd);
		break;
	default:
		err = -EINVAL;
	}
 
	return err;
}

/****** Driver IOCTL Handlers ***********************************************/

/*============================================================================
 * Dump adapter memory to user buffer.
 * o verify request structure
 * o copy request structure to kernel data space
 * o verify length/offset
 * o verify user buffer
 * o copy adapter memory image to user buffer
 *
 * Note: when dumping memory, this routine switches curent dual-port memory
 *	 vector, so care must be taken to avoid racing conditions.
 */
static int ioctl_dump (sdla_t* card, sdla_dump_t* u_dump)
{
	sdla_dump_t dump;
	unsigned winsize;
	unsigned long oldvec;	/* DPM window vector */
	unsigned long smp_flags;
	int err = 0;

	if(copy_from_user((void*)&dump, (void*)u_dump, sizeof(sdla_dump_t)))
		return -EFAULT;
		
	if ((dump.magic != WANPIPE_MAGIC) ||
	    (dump.offset + dump.length > card->hw.memory))
		return -EINVAL;
	
	winsize = card->hw.dpmsize;

	if(card->hw.type != SDLA_S514) {

		lock_adapter_irq(&card->wandev.lock, &smp_flags);
		
                oldvec = card->hw.vector;
                while (dump.length) {
			/* current offset */				
                        unsigned pos = dump.offset % winsize;
			/* current vector */
                        unsigned long vec = dump.offset - pos;
                        unsigned len = (dump.length > (winsize - pos)) ?
                        	(winsize - pos) : dump.length;
			/* relocate window */
                        if (sdla_mapmem(&card->hw, vec) != 0) {
                                err = -EIO;
                                break;
                        }
			
                        if(copy_to_user((void *)dump.ptr,
                                (u8 *)card->hw.dpmbase + pos, len)){ 
				
				unlock_adapter_irq(&card->wandev.lock, &smp_flags);
				return -EFAULT;
			}

                        dump.length     -= len;
                        dump.offset     += len;
                        dump.ptr         = (char*)dump.ptr + len;
                }
		
                sdla_mapmem(&card->hw, oldvec);/* restore DPM window position */
		unlock_adapter_irq(&card->wandev.lock, &smp_flags);
        
	}else {

               if(copy_to_user((void *)dump.ptr,
			       (u8 *)card->hw.dpmbase + dump.offset, dump.length)){
			return -EFAULT;
		}
	}

	return err;
}

/*============================================================================
 * Execute adapter firmware command.
 * o verify request structure
 * o copy request structure to kernel data space
 * o call protocol-specific 'exec' function
 */
static int ioctl_exec (sdla_t* card, sdla_exec_t* u_exec, int cmd)
{
	sdla_exec_t exec;
	int err=0;

	if (card->exec == NULL && cmd == WANPIPE_EXEC){
		return -ENODEV;
	}

	if(copy_from_user((void*)&exec, (void*)u_exec, sizeof(sdla_exec_t)))
		return -EFAULT;

	if ((exec.magic != WANPIPE_MAGIC) || (exec.cmd == NULL))
		return -EINVAL;

	switch (cmd) {
		case WANPIPE_EXEC:	
			err = card->exec(card, exec.cmd, exec.data);
			break;
	}	
	return err;
}

/******* Miscellaneous ******************************************************/

/*============================================================================
 * SDLA Interrupt Service Routine.
 * o acknowledge SDLA hardware interrupt.
 * o call protocol-specific interrupt service routine, if any.
 */
STATIC irqreturn_t sdla_isr (int irq, void* dev_id, struct pt_regs *regs)
{
#define	card	((sdla_t*)dev_id)

	if(card->hw.type == SDLA_S514) {	/* handle interrrupt on S514 */
                u32 int_status;
                unsigned char CPU_no = card->hw.S514_cpu_no[0];
                unsigned char card_found_for_IRQ;
		u8 IRQ_count = 0;

		for(;;) {

			read_S514_int_stat(&card->hw, &int_status);

			/* check if the interrupt is for this device */
 			if(!((unsigned char)int_status &
				(IRQ_CPU_A | IRQ_CPU_B)))
                	        return IRQ_HANDLED;

			/* if the IRQ is for both CPUs on the same adapter, */
			/* then alter the interrupt status so as to handle */
			/* one CPU at a time */
			if(((unsigned char)int_status & (IRQ_CPU_A | IRQ_CPU_B))
				== (IRQ_CPU_A | IRQ_CPU_B)) {
				int_status &= (CPU_no == S514_CPU_A) ?
					~IRQ_CPU_B : ~IRQ_CPU_A;
			}
 
			card_found_for_IRQ = 0;

	             	/* check to see that the CPU number for this device */
			/* corresponds to the interrupt status read */
                	switch (CPU_no) {
                        	case S514_CPU_A:
                                	if((unsigned char)int_status &
						IRQ_CPU_A)
                                        card_found_for_IRQ = 1;
                                break;

	                        case S514_CPU_B:
        	                        if((unsigned char)int_status &
						IRQ_CPU_B)
                                        card_found_for_IRQ = 1;
                                break;
                	}

			/* exit if the interrupt is for another CPU on the */
			/* same IRQ */
			if(!card_found_for_IRQ)
				return IRQ_HANDLED;

       	 		if (!card || 
			   (card->wandev.state == WAN_UNCONFIGURED && !card->configured)){
					printk(KERN_INFO
						"Received IRQ %d for CPU #%c\n",
						irq, CPU_no);
					printk(KERN_INFO
						"IRQ for unconfigured adapter\n");
					S514_intack(&card->hw, int_status);
					return IRQ_HANDLED;
       			}

	        	if (card->in_isr) {
        	       		printk(KERN_INFO
					"%s: interrupt re-entrancy on IRQ %d\n",
                       			card->devname, card->wandev.irq);
				S514_intack(&card->hw, int_status);
 				return IRQ_HANDLED;
       			}

			spin_lock(&card->wandev.lock);
			if (card->next){
				spin_lock(&card->next->wandev.lock);
			}
				
	               	S514_intack(&card->hw, int_status);
       			if (card->isr)
				card->isr(card);

			if (card->next){
				spin_unlock(&card->next->wandev.lock);
			}
			spin_unlock(&card->wandev.lock);

			/* handle a maximum of two interrupts (one for each */
			/* CPU on the adapter) before returning */  
			if((++ IRQ_count) == 2)
				return IRQ_HANDLED;
		}
	}

	else {			/* handle interrupt on S508 adapter */

		if (!card || ((card->wandev.state == WAN_UNCONFIGURED) && !card->configured))
			return IRQ_HANDLED;

		if (card->in_isr) {
			printk(KERN_INFO
				"%s: interrupt re-entrancy on IRQ %d!\n",
				card->devname, card->wandev.irq);
			return IRQ_HANDLED;
		}

		spin_lock(&card->wandev.lock);
		if (card->next){
			spin_lock(&card->next->wandev.lock);
		}
	
		sdla_intack(&card->hw);
		if (card->isr)
			card->isr(card);
		
		if (card->next){
			spin_unlock(&card->next->wandev.lock);
		}
		spin_unlock(&card->wandev.lock);

	}
        return IRQ_HANDLED;
#undef	card
}

/*============================================================================
 * This routine is called by the protocol-specific modules when network
 * interface is being open.  The only reason we need this, is because we
 * have to call MOD_INC_USE_COUNT, but cannot include 'module.h' where it's
 * defined more than once into the same kernel module.
 */
void wanpipe_open (sdla_t* card)
{
	++card->open_cnt;
}

/*============================================================================
 * This routine is called by the protocol-specific modules when network
 * interface is being closed.  The only reason we need this, is because we
 * have to call MOD_DEC_USE_COUNT, but cannot include 'module.h' where it's
 * defined more than once into the same kernel module.
 */
void wanpipe_close (sdla_t* card)
{
	--card->open_cnt;
}

/*============================================================================
 * Set WAN device state.
 */
void wanpipe_set_state (sdla_t* card, int state)
{
	if (card->wandev.state != state) {
		switch (state) {
		case WAN_CONNECTED:
			printk (KERN_INFO "%s: link connected!\n",
				card->devname);
			break;

		case WAN_CONNECTING:
			printk (KERN_INFO "%s: link connecting...\n",
				card->devname);
			break;

		case WAN_DISCONNECTED:
			printk (KERN_INFO "%s: link disconnected!\n",
				card->devname);
			break;
		}
		card->wandev.state = state;
	}
	card->state_tick = jiffies;
}

sdla_t * wanpipe_find_card (char *name)
{
	int cnt;
	for (cnt = 0; cnt < ncards; ++ cnt) {
		sdla_t* card = &card_array[cnt];
		if (!strcmp(card->devname,name))
			return card;
	}
	return NULL;
}

sdla_t * wanpipe_find_card_num (int num)
{
	if (num < 1 || num > ncards)
		return NULL;	
	num--;
	return &card_array[num];
}

/*
 * @work_pointer:	work_struct to be done;
 * 			should already have PREPARE_WORK() or
 * 			  INIT_WORK() done on it by caller;
 */
void wanpipe_queue_work (struct work_struct *work_pointer)
{
	if (test_and_set_bit(1, (void*)&wanpipe_bh_critical))
		printk(KERN_INFO "CRITICAL IN QUEUING WORK\n");

	queue_work(wanpipe_wq, work_pointer);
	clear_bit(1,(void*)&wanpipe_bh_critical);
}

void wakeup_sk_bh(struct net_device *dev)
{
	wanpipe_common_t *chan = dev->priv;

	if (test_bit(0,&chan->common_critical))
		return;
	
	if (chan->sk && chan->tx_timer){
		chan->tx_timer->expires=jiffies+1;
		add_timer(chan->tx_timer);
	}
}

int change_dev_flags(struct net_device *dev, unsigned flags)
{
	struct ifreq if_info;
	mm_segment_t fs = get_fs();
	int err;

	memset(&if_info, 0, sizeof(if_info));
	strcpy(if_info.ifr_name, dev->name);
	if_info.ifr_flags = flags;	

	set_fs(get_ds());     /* get user space block */ 
	err = devinet_ioctl(SIOCSIFFLAGS, &if_info);
	set_fs(fs);

	return err;
}

unsigned long get_ip_address(struct net_device *dev, int option)
{
	
	struct in_ifaddr *ifaddr;
	struct in_device *in_dev;
	unsigned long addr = 0;

	rcu_read_lock();
	if ((in_dev = __in_dev_get_rcu(dev)) == NULL){
		goto out;
	}

	if ((ifaddr = in_dev->ifa_list)== NULL ){
		goto out;
	}
	
	switch (option){

	case WAN_LOCAL_IP:
		addr = ifaddr->ifa_local;
		break;
	
	case WAN_POINTOPOINT_IP:
		addr = ifaddr->ifa_address;
		break;	

	case WAN_NETMASK_IP:
		addr = ifaddr->ifa_mask;
		break;

	case WAN_BROADCAST_IP:
		addr = ifaddr->ifa_broadcast;
		break;
	default:
		break;
	}

out:
	rcu_read_unlock();
	return addr;
}	

void add_gateway(sdla_t *card, struct net_device *dev)
{
	mm_segment_t oldfs;
	struct rtentry route;
	int res;

	memset((char*)&route,0,sizeof(struct rtentry));

	((struct sockaddr_in *)
		&(route.rt_dst))->sin_addr.s_addr = 0;
	((struct sockaddr_in *)
		&(route.rt_dst))->sin_family = AF_INET;

	((struct sockaddr_in *)
		&(route.rt_genmask))->sin_addr.s_addr = 0;
	((struct sockaddr_in *) 
		&(route.rt_genmask)) ->sin_family = AF_INET;


	route.rt_flags = 0;  
	route.rt_dev = dev->name;

	oldfs = get_fs();
	set_fs(get_ds());
	res = ip_rt_ioctl(SIOCADDRT,&route);
	set_fs(oldfs);

	if (res == 0){
		printk(KERN_INFO "%s: Gateway added for %s\n",
			card->devname,dev->name);
	}

	return;
}

MODULE_LICENSE("GPL");

/****** End *********************************************************/