| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Introduce the capability to dynamically configure the maximum file
note size for ELF core dumps via sysctl.
Why is this being done?
We have observed that during a crash when there are more than 65k mmaps
in memory, the existing fixed limit on the size of the ELF notes section
becomes a bottleneck. The notes section quickly reaches its capacity,
leading to incomplete memory segment information in the resulting coredump.
This truncation compromises the utility of the coredumps, as crucial
information about the memory state at the time of the crash might be
omitted.
This enhancement removes the previous static limit of 4MB, allowing
system administrators to adjust the size based on system-specific
requirements or constraints.
Eg:
$ sysctl -a | grep core_file_note_size_limit
kernel.core_file_note_size_limit = 4194304
$ sysctl -n kernel.core_file_note_size_limit
4194304
$echo 519304 > /proc/sys/kernel/core_file_note_size_limit
$sysctl -n kernel.core_file_note_size_limit
519304
Attempting to write beyond the ceiling value of 16MB
$echo 17194304 > /proc/sys/kernel/core_file_note_size_limit
bash: echo: write error: Invalid argument
Signed-off-by: Vijay Nag <nagvijay@microsoft.com>
Signed-off-by: Allen Pais <apais@linux.microsoft.com>
Link: https://lore.kernel.org/r/20240506193700.7884-1-apais@linux.microsoft.com
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
This flag is only set by one single user: the magical core dumping code
that looks up user pages one by one, and then writes them out using
their kernel addresses (by using a BVEC_ITER).
That actually ends up being a huge problem, because while we do use
copy_mc_to_kernel() for this case and it is able to handle the possible
machine checks involved, nothing else is really ready to handle the
failures caused by the machine check.
In particular, as reported by Tong Tiangen, we don't actually support
fault_in_iov_iter_readable() on a machine check area.
As a result, the usual logic for writing things to a file under a
filesystem lock, which involves doing a copy with page faults disabled
and then if that fails trying to fault pages in without holding the
locks with fault_in_iov_iter_readable() does not work at all.
We could decide to always just make the MC copy "succeed" (and filling
the destination with zeroes), and that would then create a core dump
file that just ignores any machine checks.
But honestly, this single special case has been problematic before, and
means that all the normal iov_iter code ends up slightly more complex
and slower.
See for example commit c9eec08bac96 ("iov_iter: Don't deal with
iter->copy_mc in memcpy_from_iter_mc()") where David Howells
re-organized the code just to avoid having to check the 'copy_mc' flags
inside the inner iov_iter loops.
So considering that we have exactly one user, and that one user is a
non-critical special case that doesn't actually ever trigger in real
life (Tong found this with manual error injection), the sane solution is
to just decide that the onus on handling the machine check lines on that
user instead.
Ergo, do the copy_mc_to_kernel() in the core dump logic itself, copying
the user data to a stable kernel page before writing it out.
Fixes: f1982740f5e7 ("iov_iter: Convert iterate*() to inline funcs")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Tong Tiangen <tongtiangen@huawei.com>
Link: https://lore.kernel.org/r/20240305133336.3804360-1-tongtiangen@huawei.com
Link: https://lore.kernel.org/all/4e80924d-9c85-f13a-722a-6a5d2b1c225a@huawei.com/
Tested-by: David Howells <dhowells@redhat.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reported-by: Tong Tiangen <tongtiangen@huawei.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This commit comes at the tail end of a greater effort to remove the
empty elements at the end of the ctl_table arrays (sentinels) which
will reduce the overall build time size of the kernel and run time
memory bloat by ~64 bytes per sentinel (further information Link :
https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/)
Remove sentinel elements ctl_table struct. Special attention was placed in
making sure that an empty directory for fs/verity was created when
CONFIG_FS_VERITY_BUILTIN_SIGNATURES is not defined. In this case we use the
register sysctl call that expects a size.
Signed-off-by: Joel Granados <j.granados@samsung.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"Miscellaneous features, cleanups, and fixes for vfs and individual fs
Features:
- Use mode 0600 for file created by cachefilesd so it can be run by
unprivileged users. This aligns them with directories which are
already created with mode 0700 by cachefilesd
- Reorder a few members in struct file to prevent some false sharing
scenarios
- Indicate that an eventfd is used a semaphore in the eventfd's
fdinfo procfs file
- Add a missing uapi header for eventfd exposing relevant uapi
defines
- Let the VFS protect transitions of a superblock from read-only to
read-write in addition to the protection it already provides for
transitions from read-write to read-only. Protecting read-only to
read-write transitions allows filesystems such as ext4 to perform
internal writes, keeping writers away until the transition is
completed
Cleanups:
- Arnd removed the architecture specific arch_report_meminfo()
prototypes and added a generic one into procfs.h. Note, we got a
report about a warning in amdpgpu codepaths that suggested this was
bisectable to this change but we concluded it was a false positive
- Remove unused parameters from split_fs_names()
- Rename put_and_unmap_page() to unmap_and_put_page() to let the name
reflect the order of the cleanup operation that has to unmap before
the actual put
- Unexport buffer_check_dirty_writeback() as it is not used outside
of block device aops
- Stop allocating aio rings from highmem
- Protecting read-{only,write} transitions in the VFS used open-coded
barriers in various places. Replace them with proper little helpers
and document both the helpers and all barrier interactions involved
when transitioning between read-{only,write} states
- Use flexible array members in old readdir codepaths
Fixes:
- Use the correct type __poll_t for epoll and eventfd
- Replace all deprecated strlcpy() invocations, whose return value
isn't checked with an equivalent strscpy() call
- Fix some kernel-doc warnings in fs/open.c
- Reduce the stack usage in jffs2's xattr codepaths finally getting
rid of this: fs/jffs2/xattr.c:887:1: error: the frame size of 1088
bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
royally annoying compilation warning
- Use __FMODE_NONOTIFY instead of FMODE_NONOTIFY where an int and not
fmode_t is required to avoid fmode_t to integer degradation
warnings
- Create coredumps with O_WRONLY instead of O_RDWR. There's a long
explanation in that commit how O_RDWR is actually a bug which we
found out with the help of Linus and git archeology
- Fix "no previous prototype" warnings in the pipe codepaths
- Add overflow calculations for remap_verify_area() as a signed
addition overflow could be triggered in xfstests
- Fix a null pointer dereference in sysv
- Use an unsigned variable for length calculations in jfs avoiding
compilation warnings with gcc 13
- Fix a dangling pipe pointer in the watch queue codepath
- The legacy mount option parser provided as a fallback by the VFS
for filesystems not yet converted to the new mount api did prefix
the generated mount option string with a leading ',' causing issues
for some filesystems
- Fix a repeated word in a comment in fs.h
- autofs: Update the ctime when mtime is updated as mandated by
POSIX"
* tag 'v6.5/vfs.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (27 commits)
readdir: Replace one-element arrays with flexible-array members
fs: Provide helpers for manipulating sb->s_readonly_remount
fs: Protect reconfiguration of sb read-write from racing writes
eventfd: add a uapi header for eventfd userspace APIs
autofs: set ctime as well when mtime changes on a dir
eventfd: show the EFD_SEMAPHORE flag in fdinfo
fs/aio: Stop allocating aio rings from HIGHMEM
fs: Fix comment typo
fs: unexport buffer_check_dirty_writeback
fs: avoid empty option when generating legacy mount string
watch_queue: prevent dangling pipe pointer
fs.h: Optimize file struct to prevent false sharing
highmem: Rename put_and_unmap_page() to unmap_and_put_page()
cachefiles: Allow the cache to be non-root
init: remove unused names parameter in split_fs_names()
jfs: Use unsigned variable for length calculations
fs/sysv: Null check to prevent null-ptr-deref bug
fs: use UB-safe check for signed addition overflow in remap_verify_area
procfs: consolidate arch_report_meminfo declaration
fs: pipe: reveal missing function protoypes
...
|
|
When switching from kthreads to vhost_tasks two bugs were added:
1. The vhost worker tasks's now show up as processes so scripts doing
ps or ps a would not incorrectly detect the vhost task as another
process. 2. kthreads disabled freeze by setting PF_NOFREEZE, but
vhost tasks's didn't disable or add support for them.
To fix both bugs, this switches the vhost task to be thread in the
process that does the VHOST_SET_OWNER ioctl, and has vhost_worker call
get_signal to support SIGKILL/SIGSTOP and freeze signals. Note that
SIGKILL/STOP support is required because CLONE_THREAD requires
CLONE_SIGHAND which requires those 2 signals to be supported.
This is a modified version of the patch written by Mike Christie
<michael.christie@oracle.com> which was a modified version of patch
originally written by Linus.
Much of what depended upon PF_IO_WORKER now depends on PF_USER_WORKER.
Including ignoring signals, setting up the register state, and having
get_signal return instead of calling do_group_exit.
Tidied up the vhost_task abstraction so that the definition of
vhost_task only needs to be visible inside of vhost_task.c. Making
it easier to review the code and tell what needs to be done where.
As part of this the main loop has been moved from vhost_worker into
vhost_task_fn. vhost_worker now returns true if work was done.
The main loop has been updated to call get_signal which handles
SIGSTOP, freezing, and collects the message that tells the thread to
exit as part of process exit. This collection clears
__fatal_signal_pending. This collection is not guaranteed to
clear signal_pending() so clear that explicitly so the schedule()
sleeps.
For now the vhost thread continues to exist and run work until the
last file descriptor is closed and the release function is called as
part of freeing struct file. To avoid hangs in the coredump
rendezvous and when killing threads in a multi-threaded exec. The
coredump code and de_thread have been modified to ignore vhost threads.
Remvoing the special case for exec appears to require teaching
vhost_dev_flush how to directly complete transactions in case
the vhost thread is no longer running.
Removing the special case for coredump rendezvous requires either the
above fix needed for exec or moving the coredump rendezvous into
get_signal.
Fixes: 6e890c5d5021 ("vhost: use vhost_tasks for worker threads")
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Co-developed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The motivation for this patch has been to enable using a stricter
apparmor profile to prevent programs from reading any coredump in the
system.
However, this became something else. The following details are based on
Christian's and Linus' archeology into the history of the number "2" in
the coredump handling code.
To make sure we're not accidently introducing some subtle behavioral
change into the coredump code we set out on a voyage into the depths of
history.git to figure out why this was O_RDWR in the first place.
Coredump handling was introduced over 30 years ago in commit
ddc733f452e0 ("[PATCH] Linux-0.97 (August 1, 1992)").
The original code used O_WRONLY:
open_namei("core",O_CREAT | O_WRONLY | O_TRUNC,0600,&inode,NULL)
However, this changed in 1993 and starting with commit
9cb9f18b5d26 ("[PATCH] Linux-0.99.10 (June 7, 1993)") the coredump code
suddenly used the constant "2":
open_namei("core",O_CREAT | 2 | O_TRUNC,0600,&inode,NULL)
This was curious as in the same commit the kernel switched from
constants to proper defines in other places such as KERNEL_DS and
USER_DS and O_RDWR did already exist.
So why was "2" used? It turns out that open_namei() - an early version
of what later turned into filp_open() - didn't accept O_RDWR.
A semantic quirk of the open() uapi is the definition of the O_RDONLY
flag. It would seem natural to define:
#define O_RDWR (O_RDONLY | O_WRONLY)
but that isn't possible because:
#define O_RDONLY 0
This makes O_RDONLY effectively meaningless when passed to the kernel.
In other words, there has never been a way - until O_PATH at least - to
open a file without any permission; O_RDONLY was always implied on the
uapi side while the kernel does in fact allow opening files without
permissions.
The trouble comes when trying to map the uapi flags onto the
corresponding file mode flags FMODE_{READ,WRITE}. This mapping still
happens today and is causing issues to this day (We ran into this
during additions for openat2() for example.).
So the special value "3" was used to indicate that the file was opened
for special access:
f->f_flags = flag = flags;
f->f_mode = (flag+1) & O_ACCMODE;
if (f->f_mode)
flag++;
This allowed the file mode to be set to FMODE_READ | FMODE_WRITE mapping
the O_{RDONLY,WRONLY,RDWR} flags into the FMODE_{READ,WRITE} flags. The
special access then required read-write permissions and 0 was used to
access symlinks.
But back when ddc733f452e0 ("[PATCH] Linux-0.97 (August 1, 1992)") added
coredump handling open_namei() took the FMODE_{READ,WRITE} flags as an
argument. So the coredump handling introduced in
ddc733f452e0 ("[PATCH] Linux-0.97 (August 1, 1992)") was buggy because
O_WRONLY shouldn't have been passed. Since O_WRONLY is 1 but
open_namei() took FMODE_{READ,WRITE} it was passed FMODE_READ on
accident.
So 9cb9f18b5d26 ("[PATCH] Linux-0.99.10 (June 7, 1993)") was a bugfix
for this and the 2 didn't really mean O_RDWR, it meant FMODE_WRITE which
was correct.
The clue is that FMODE_{READ,WRITE} didn't exist yet and thus a raw "2"
value was passed.
Fast forward 5 years when around 2.2.4pre4 (February 16, 1999) this code
was changed to:
- dentry = open_namei(corefile,O_CREAT | 2 | O_TRUNC | O_NOFOLLOW, 0600);
...
+ file = filp_open(corefile,O_CREAT | 2 | O_TRUNC | O_NOFOLLOW, 0600);
At this point the raw "2" should have become O_WRONLY again as
filp_open() didn't take FMODE_{READ,WRITE} but O_{RDONLY,WRONLY,RDWR}.
Another 17 years later, the code was changed again cementing the mistake
and making it almost impossible to detect when commit
378c6520e7d2 ("fs/coredump: prevent fsuid=0 dumps into user-controlled directories")
replaced the raw "2" with O_RDWR.
And now, here we are with this patch that sent us on a quest to answer
the big questions in life such as "Why are coredump files opened with
O_RDWR?" and "Is it safe to just use O_WRONLY?".
So with this commit we're reintroducing O_WRONLY again and bringing this
code back to its original state when it was first introduced in commit
ddc733f452e0 ("[PATCH] Linux-0.97 (August 1, 1992)") over 30 years ago.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20230420120409.602576-1-vsementsov@yandex-team.ru>
[brauner@kernel.org: completely rewritten commit message]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
dump_user_range() is used to copy the user page to a coredump file, but if
a hardware memory error occurred during copy, which called from
__kernel_write_iter() in dump_user_range(), it crashes,
CPU: 112 PID: 7014 Comm: mca-recover Not tainted 6.3.0-rc2 #425
pc : __memcpy+0x110/0x260
lr : _copy_from_iter+0x3bc/0x4c8
...
Call trace:
__memcpy+0x110/0x260
copy_page_from_iter+0xcc/0x130
pipe_write+0x164/0x6d8
__kernel_write_iter+0x9c/0x210
dump_user_range+0xc8/0x1d8
elf_core_dump+0x308/0x368
do_coredump+0x2e8/0xa40
get_signal+0x59c/0x788
do_signal+0x118/0x1f8
do_notify_resume+0xf0/0x280
el0_da+0x130/0x138
el0t_64_sync_handler+0x68/0xc0
el0t_64_sync+0x188/0x190
Generally, the '->write_iter' of file ops will use copy_page_from_iter()
and copy_page_from_iter_atomic(), change memcpy() to copy_mc_to_kernel()
in both of them to handle #MC during source read, which stop coredump
processing and kill the task instead of kernel panic, but the source
address may not always a user address, so introduce a new copy_mc flag in
struct iov_iter{} to indicate that the iter could do a safe memory copy,
also introduce the helpers to set/cleck the flag, for now, it's only used
in coredump's dump_user_range(), but it could expand to any other
scenarios to fix the similar issue.
Link: https://lkml.kernel.org/r/20230417045323.11054-1-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Tong Tiangen <tongtiangen@huawei.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Daniel Verkamp has contributed a memfd series ("mm/memfd: add
F_SEAL_EXEC") which permits the setting of the memfd execute bit at
memfd creation time, with the option of sealing the state of the X
bit.
- Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
thread-safe for pmd unshare") which addresses a rare race condition
related to PMD unsharing.
- Several folioification patch serieses from Matthew Wilcox, Vishal
Moola, Sidhartha Kumar and Lorenzo Stoakes
- Johannes Weiner has a series ("mm: push down lock_page_memcg()")
which does perform some memcg maintenance and cleanup work.
- SeongJae Park has added DAMOS filtering to DAMON, with the series
"mm/damon/core: implement damos filter".
These filters provide users with finer-grained control over DAMOS's
actions. SeongJae has also done some DAMON cleanup work.
- Kairui Song adds a series ("Clean up and fixes for swap").
- Vernon Yang contributed the series "Clean up and refinement for maple
tree".
- Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It
adds to MGLRU an LRU of memcgs, to improve the scalability of global
reclaim.
- David Hildenbrand has added some userfaultfd cleanup work in the
series "mm: uffd-wp + change_protection() cleanups".
- Christoph Hellwig has removed the generic_writepages() library
function in the series "remove generic_writepages".
- Baolin Wang has performed some maintenance on the compaction code in
his series "Some small improvements for compaction".
- Sidhartha Kumar is doing some maintenance work on struct page in his
series "Get rid of tail page fields".
- David Hildenbrand contributed some cleanup, bugfixing and
generalization of pte management and of pte debugging in his series
"mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with
swap PTEs".
- Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
flag in the series "Discard __GFP_ATOMIC".
- Sergey Senozhatsky has improved zsmalloc's memory utilization with
his series "zsmalloc: make zspage chain size configurable".
- Joey Gouly has added prctl() support for prohibiting the creation of
writeable+executable mappings.
The previous BPF-based approach had shortcomings. See "mm: In-kernel
support for memory-deny-write-execute (MDWE)".
- Waiman Long did some kmemleak cleanup and bugfixing in the series
"mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".
- T.J. Alumbaugh has contributed some MGLRU cleanup work in his series
"mm: multi-gen LRU: improve".
- Jiaqi Yan has provided some enhancements to our memory error
statistics reporting, mainly by presenting the statistics on a
per-node basis. See the series "Introduce per NUMA node memory error
statistics".
- Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
regression in compaction via his series "Fix excessive CPU usage
during compaction".
- Christoph Hellwig does some vmalloc maintenance work in the series
"cleanup vfree and vunmap".
- Christoph Hellwig has removed block_device_operations.rw_page() in
ths series "remove ->rw_page".
- We get some maple_tree improvements and cleanups in Liam Howlett's
series "VMA tree type safety and remove __vma_adjust()".
- Suren Baghdasaryan has done some work on the maintainability of our
vm_flags handling in the series "introduce vm_flags modifier
functions".
- Some pagemap cleanup and generalization work in Mike Rapoport's
series "mm, arch: add generic implementation of pfn_valid() for
FLATMEM" and "fixups for generic implementation of pfn_valid()"
- Baoquan He has done some work to make /proc/vmallocinfo and
/proc/kcore better represent the real state of things in his series
"mm/vmalloc.c: allow vread() to read out vm_map_ram areas".
- Jason Gunthorpe rationalized the GUP system's interface to the rest
of the kernel in the series "Simplify the external interface for
GUP".
- SeongJae Park wishes to migrate people from DAMON's debugfs interface
over to its sysfs interface. To support this, we'll temporarily be
printing warnings when people use the debugfs interface. See the
series "mm/damon: deprecate DAMON debugfs interface".
- Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
and clean-ups" series.
- Huang Ying has provided a dramatic reduction in migration's TLB flush
IPI rates with the series "migrate_pages(): batch TLB flushing".
- Arnd Bergmann has some objtool fixups in "objtool warning fixes".
* tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (505 commits)
include/linux/migrate.h: remove unneeded externs
mm/memory_hotplug: cleanup return value handing in do_migrate_range()
mm/uffd: fix comment in handling pte markers
mm: change to return bool for isolate_movable_page()
mm: hugetlb: change to return bool for isolate_hugetlb()
mm: change to return bool for isolate_lru_page()
mm: change to return bool for folio_isolate_lru()
objtool: add UACCESS exceptions for __tsan_volatile_read/write
kmsan: disable ftrace in kmsan core code
kasan: mark addr_has_metadata __always_inline
mm: memcontrol: rename memcg_kmem_enabled()
sh: initialize max_mapnr
m68k/nommu: add missing definition of ARCH_PFN_OFFSET
mm: percpu: fix incorrect size in pcpu_obj_full_size()
maple_tree: reduce stack usage with gcc-9 and earlier
mm: page_alloc: call panic() when memoryless node allocation fails
mm: multi-gen LRU: avoid futile retries
migrate_pages: move THP/hugetlb migration support check to simplify code
migrate_pages: batch flushing TLB
migrate_pages: share more code between _unmap and _move
...
|
|
Pull block updates from Jens Axboe:
- NVMe updates via Christoph:
- Small improvements to the logging functionality (Amit Engel)
- Authentication cleanups (Hannes Reinecke)
- Cleanup and optimize the DMA mapping cod in the PCIe driver
(Keith Busch)
- Work around the command effects for Format NVM (Keith Busch)
- Misc cleanups (Keith Busch, Christoph Hellwig)
- Fix and cleanup freeing single sgl (Keith Busch)
- MD updates via Song:
- Fix a rare crash during the takeover process
- Don't update recovery_cp when curr_resync is ACTIVE
- Free writes_pending in md_stop
- Change active_io to percpu
- Updates to drbd, inching us closer to unifying the out-of-tree driver
with the in-tree one (Andreas, Christoph, Lars, Robert)
- BFQ update adding support for multi-actuator drives (Paolo, Federico,
Davide)
- Make brd compliant with REQ_NOWAIT (me)
- Fix for IOPOLL and queue entering, fixing stalled IO waiting on
timeouts (me)
- Fix for REQ_NOWAIT with multiple bios (me)
- Fix memory leak in blktrace cleanup (Greg)
- Clean up sbitmap and fix a potential hang (Kemeng)
- Clean up some bits in BFQ, and fix a bug in the request injection
(Kemeng)
- Clean up the request allocation and issue code, and fix some bugs
related to that (Kemeng)
- ublk updates and fixes:
- Add support for unprivileged ublk (Ming)
- Improve device deletion handling (Ming)
- Misc (Liu, Ziyang)
- s390 dasd fixes (Alexander, Qiheng)
- Improve utility of request caching and fixes (Anuj, Xiao)
- zoned cleanups (Pankaj)
- More constification for kobjs (Thomas)
- blk-iocost cleanups (Yu)
- Remove bio splitting from drivers that don't need it (Christoph)
- Switch blk-cgroups to use struct gendisk. Some of this is now
incomplete as select late reverts were done. (Christoph)
- Add bvec initialization helpers, and convert callers to use that
rather than open-coding it (Christoph)
- Misc fixes and cleanups (Jinke, Keith, Arnd, Bart, Li, Martin,
Matthew, Ulf, Zhong)
* tag 'for-6.3/block-2023-02-16' of git://git.kernel.dk/linux: (169 commits)
brd: use radix_tree_maybe_preload instead of radix_tree_preload
block: use proper return value from bio_failfast()
block: bio-integrity: Copy flags when bio_integrity_payload is cloned
block: Fix io statistics for cgroup in throttle path
brd: mark as nowait compatible
brd: check for REQ_NOWAIT and set correct page allocation mask
brd: return 0/-error from brd_insert_page()
block: sync mixed merged request's failfast with 1st bio's
Revert "blk-cgroup: pin the gendisk in struct blkcg_gq"
Revert "blk-cgroup: pass a gendisk to blkg_lookup"
Revert "blk-cgroup: delay blk-cgroup initialization until add_disk"
Revert "blk-cgroup: delay calling blkcg_exit_disk until disk_release"
Revert "blk-cgroup: move the cgroup information to struct gendisk"
nvme-pci: remove iod use_sgls
nvme-pci: fix freeing single sgl
block: ublk: check IO buffer based on flag need_get_data
s390/dasd: Fix potential memleak in dasd_eckd_init()
s390/dasd: sort out physical vs virtual pointers usage
block: Remove the ALLOC_CACHE_SLACK constant
block: make kobj_type structures constant
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping
Pull vfs idmapping updates from Christian Brauner:
- Last cycle we introduced the dedicated struct mnt_idmap type for
mount idmapping and the required infrastucture in 256c8aed2b42 ("fs:
introduce dedicated idmap type for mounts"). As promised in last
cycle's pull request message this converts everything to rely on
struct mnt_idmap.
Currently we still pass around the plain namespace that was attached
to a mount. This is in general pretty convenient but it makes it easy
to conflate namespaces that are relevant on the filesystem with
namespaces that are relevant on the mount level. Especially for
non-vfs developers without detailed knowledge in this area this was a
potential source for bugs.
This finishes the conversion. Instead of passing the plain namespace
around this updates all places that currently take a pointer to a
mnt_userns with a pointer to struct mnt_idmap.
Now that the conversion is done all helpers down to the really
low-level helpers only accept a struct mnt_idmap argument instead of
two namespace arguments.
Conflating mount and other idmappings will now cause the compiler to
complain loudly thus eliminating the possibility of any bugs. This
makes it impossible for filesystem developers to mix up mount and
filesystem idmappings as they are two distinct types and require
distinct helpers that cannot be used interchangeably.
Everything associated with struct mnt_idmap is moved into a single
separate file. With that change no code can poke around in struct
mnt_idmap. It can only be interacted with through dedicated helpers.
That means all filesystems are and all of the vfs is completely
oblivious to the actual implementation of idmappings.
We are now also able to extend struct mnt_idmap as we see fit. For
example, we can decouple it completely from namespaces for users that
don't require or don't want to use them at all. We can also extend
the concept of idmappings so we can cover filesystem specific
requirements.
In combination with the vfs{g,u}id_t work we finished in v6.2 this
makes this feature substantially more robust and thus difficult to
implement wrong by a given filesystem and also protects the vfs.
- Enable idmapped mounts for tmpfs and fulfill a longstanding request.
A long-standing request from users had been to make it possible to
create idmapped mounts for tmpfs. For example, to share the host's
tmpfs mount between multiple sandboxes. This is a prerequisite for
some advanced Kubernetes cases. Systemd also has a range of use-cases
to increase service isolation. And there are more users of this.
However, with all of the other work going on this was way down on the
priority list but luckily someone other than ourselves picked this
up.
As usual the patch is tiny as all the infrastructure work had been
done multiple kernel releases ago. In addition to all the tests that
we already have I requested that Rodrigo add a dedicated tmpfs
testsuite for idmapped mounts to xfstests. It is to be included into
xfstests during the v6.3 development cycle. This should add a slew of
additional tests.
* tag 'fs.idmapped.v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping: (26 commits)
shmem: support idmapped mounts for tmpfs
fs: move mnt_idmap
fs: port vfs{g,u}id helpers to mnt_idmap
fs: port fs{g,u}id helpers to mnt_idmap
fs: port i_{g,u}id_into_vfs{g,u}id() to mnt_idmap
fs: port i_{g,u}id_{needs_}update() to mnt_idmap
quota: port to mnt_idmap
fs: port privilege checking helpers to mnt_idmap
fs: port inode_owner_or_capable() to mnt_idmap
fs: port inode_init_owner() to mnt_idmap
fs: port acl to mnt_idmap
fs: port xattr to mnt_idmap
fs: port ->permission() to pass mnt_idmap
fs: port ->fileattr_set() to pass mnt_idmap
fs: port ->set_acl() to pass mnt_idmap
fs: port ->get_acl() to pass mnt_idmap
fs: port ->tmpfile() to pass mnt_idmap
fs: port ->rename() to pass mnt_idmap
fs: port ->mknod() to pass mnt_idmap
fs: port ->mkdir() to pass mnt_idmap
...
|
|
Use the vma iterator so that the iterator can be invalidated or updated to
avoid each caller doing so.
Link: https://lkml.kernel.org/r/20230120162650.984577-20-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use the bvec_set_page helper to initialize a bvec.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230203150634.3199647-15-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Convert to struct mnt_idmap.
Remove legacy file_mnt_user_ns() and mnt_user_ns().
Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
If CONFIG_ELF_CORE is not set:
fs/coredump.c:835:12: error: ‘dump_emit_page’ defined but not used [-Werror=unused-function]
835 | static int dump_emit_page(struct coredump_params *cprm, struct page *page)
| ^~~~~~~~~~~~~~
Fix this by moving dump_emit_page() inside the existing section
protected by #ifdef CONFIG_ELF_CORE.
Fixes: 06bbaa6dc53cb720 ("[coredump] don't use __kernel_write() on kmap_local_page()")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull kernel hardening updates from Kees Cook:
- Convert flexible array members, fix -Wstringop-overflow warnings, and
fix KCFI function type mismatches that went ignored by maintainers
(Gustavo A. R. Silva, Nathan Chancellor, Kees Cook)
- Remove the remaining side-effect users of ksize() by converting
dma-buf, btrfs, and coredump to using kmalloc_size_roundup(), add
more __alloc_size attributes, and introduce full testing of all
allocator functions. Finally remove the ksize() side-effect so that
each allocation-aware checker can finally behave without exceptions
- Introduce oops_limit (default 10,000) and warn_limit (default off) to
provide greater granularity of control for panic_on_oops and
panic_on_warn (Jann Horn, Kees Cook)
- Introduce overflows_type() and castable_to_type() helpers for cleaner
overflow checking
- Improve code generation for strscpy() and update str*() kern-doc
- Convert strscpy and sigphash tests to KUnit, and expand memcpy tests
- Always use a non-NULL argument for prepare_kernel_cred()
- Disable structleak plugin in FORTIFY KUnit test (Anders Roxell)
- Adjust orphan linker section checking to respect CONFIG_WERROR (Xin
Li)
- Make sure siginfo is cleared for forced SIGKILL (haifeng.xu)
- Fix um vs FORTIFY warnings for always-NULL arguments
* tag 'hardening-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (31 commits)
ksmbd: replace one-element arrays with flexible-array members
hpet: Replace one-element array with flexible-array member
um: virt-pci: Avoid GCC non-NULL warning
signal: Initialize the info in ksignal
lib: fortify_kunit: build without structleak plugin
panic: Expose "warn_count" to sysfs
panic: Introduce warn_limit
panic: Consolidate open-coded panic_on_warn checks
exit: Allow oops_limit to be disabled
exit: Expose "oops_count" to sysfs
exit: Put an upper limit on how often we can oops
panic: Separate sysctl logic from CONFIG_SMP
mm/pgtable: Fix multiple -Wstringop-overflow warnings
mm: Make ksize() a reporting-only function
kunit/fortify: Validate __alloc_size attribute results
drm/sti: Fix return type of sti_{dvo,hda,hdmi}_connector_mode_valid()
drm/fsl-dcu: Fix return type of fsl_dcu_drm_connector_mode_valid()
driver core: Add __alloc_size hint to devm allocators
overflow: Introduce overflows_type() and castable_to_type()
coredump: Proactively round up to kmalloc bucket size
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping
Pull vfsuid updates from Christian Brauner:
"Last cycle we introduced the vfs{g,u}id_t types and associated helpers
to gain type safety when dealing with idmapped mounts. That initial
work already converted a lot of places over but there were still some
left,
This converts all remaining places that still make use of non-type
safe idmapping helpers to rely on the new type safe vfs{g,u}id based
helpers.
Afterwards it removes all the old non-type safe helpers"
* tag 'fs.vfsuid.conversion.v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping:
fs: remove unused idmapping helpers
ovl: port to vfs{g,u}id_t and associated helpers
fuse: port to vfs{g,u}id_t and associated helpers
ima: use type safe idmapping helpers
apparmor: use type safe idmapping helpers
caps: use type safe idmapping helpers
fs: use type safe idmapping helpers
mnt_idmapping: add missing helpers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull iov_iter updates from Al Viro:
"iov_iter work; most of that is about getting rid of direction
misannotations and (hopefully) preventing more of the same for the
future"
* tag 'pull-iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
use less confusing names for iov_iter direction initializers
iov_iter: saner checks for attempt to copy to/from iterator
[xen] fix "direction" argument of iov_iter_kvec()
[vhost] fix 'direction' argument of iov_iter_{init,bvec}()
[target] fix iov_iter_bvec() "direction" argument
[s390] memcpy_real(): WRITE is "data source", not destination...
[s390] zcore: WRITE is "data source", not destination...
[infiniband] READ is "data destination", not source...
[fsi] WRITE is "data source", not destination...
[s390] copy_oldmem_kernel() - WRITE is "data source", not destination
csum_and_copy_to_iter(): handle ITER_DISCARD
get rid of unlikely() on page_copy_sane() calls
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull elf coredumping updates from Al Viro:
"Unification of regset and non-regset sides of ELF coredump handling.
Collecting per-thread register values is the only thing that needs to
be ifdefed there..."
* tag 'pull-elfcore' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
[elf] get rid of get_note_info_size()
[elf] unify regset and non-regset cases
[elf][non-regset] use elf_core_copy_task_regs() for dumper as well
[elf][non-regset] uninline elf_core_copy_task_fpregs() (and lose pt_regs argument)
elf_core_copy_task_regs(): task_pt_regs is defined everywhere
[elf][regset] simplify thread list handling in fill_note_info()
[elf][regset] clean fill_note_info() a bit
kill extern of vsyscall32_sysctl
kill coredump_params->regs
kill signal_pt_regs()
|
|
READ/WRITE proved to be actively confusing - the meanings are
"data destination, as used with read(2)" and "data source, as
used with write(2)", but people keep interpreting those as
"we read data from it" and "we write data to it", i.e. exactly
the wrong way.
Call them ITER_DEST and ITER_SOURCE - at least that is harder
to misinterpret...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Statistically, in a large deployment regular segfaults may indicate a CPU
issue.
Currently, it is not possible to find out what CPU the segfault happened
on. There are at least two attempts to improve segfault logging with this
regard, but they do not help in case the logs rotate.
Hence, lets make sure it is possible to permanently record a CPU the task
ran on using a new core_pattern specifier.
Link: https://lkml.kernel.org/r/20220903064330.20772-1-oleksandr@redhat.com
Signed-off-by: Oleksandr Natalenko <oleksandr@redhat.com>
Suggested-by: Renaud Métrich <rmetrich@redhat.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Grzegorz Halat <ghalat@redhat.com>
Cc: "Guilherme G. Piccoli" <gpiccoli@igalia.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Joel Savitz <jsavitz@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Laurent Dufour <ldufour@linux.ibm.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Stephen Kitt <steve@sk2.org>
Cc: Will Deacon <will@kernel.org>
Cc: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Instead of discovering the kmalloc bucket size _after_ allocation, round
up proactively so the allocation is explicitly made for the full size,
allowing the compiler to correctly reason about the resulting size of
the buffer through the existing __alloc_size() hint.
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
We already ported most parts and filesystems over for v6.0 to the new
vfs{g,u}id_t type and associated helpers for v6.0. Convert the remaining
places so we can remove all the old helpers.
This is a non-functional change.
Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
|
|
it's always task_pt_regs(current)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Once upon at it was used on hot paths, but that had not been
true since 2013. IOW, there's no point for arch-optimized
equivalent of task_pt_regs(current) - remaining two users are
not worth bothering with.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Yu Zhao's Multi-Gen LRU patches are here. They've been under test in
linux-next for a couple of months without, to my knowledge, any
negative reports (or any positive ones, come to that).
- Also the Maple Tree from Liam Howlett. An overlapping range-based
tree for vmas. It it apparently slightly more efficient in its own
right, but is mainly targeted at enabling work to reduce mmap_lock
contention.
Liam has identified a number of other tree users in the kernel which
could be beneficially onverted to mapletrees.
Yu Zhao has identified a hard-to-hit but "easy to fix" lockdep splat
at [1]. This has yet to be addressed due to Liam's unfortunately
timed vacation. He is now back and we'll get this fixed up.
- Dmitry Vyukov introduces KMSAN: the Kernel Memory Sanitizer. It uses
clang-generated instrumentation to detect used-unintialized bugs down
to the single bit level.
KMSAN keeps finding bugs. New ones, as well as the legacy ones.
- Yang Shi adds a userspace mechanism (madvise) to induce a collapse of
memory into THPs.
- Zach O'Keefe has expanded Yang Shi's madvise(MADV_COLLAPSE) to
support file/shmem-backed pages.
- userfaultfd updates from Axel Rasmussen
- zsmalloc cleanups from Alexey Romanov
- cleanups from Miaohe Lin: vmscan, hugetlb_cgroup, hugetlb and
memory-failure
- Huang Ying adds enhancements to NUMA balancing memory tiering mode's
page promotion, with a new way of detecting hot pages.
- memcg updates from Shakeel Butt: charging optimizations and reduced
memory consumption.
- memcg cleanups from Kairui Song.
- memcg fixes and cleanups from Johannes Weiner.
- Vishal Moola provides more folio conversions
- Zhang Yi removed ll_rw_block() :(
- migration enhancements from Peter Xu
- migration error-path bugfixes from Huang Ying
- Aneesh Kumar added ability for a device driver to alter the memory
tiering promotion paths. For optimizations by PMEM drivers, DRM
drivers, etc.
- vma merging improvements from Jakub Matěn.
- NUMA hinting cleanups from David Hildenbrand.
- xu xin added aditional userspace visibility into KSM merging
activity.
- THP & KSM code consolidation from Qi Zheng.
- more folio work from Matthew Wilcox.
- KASAN updates from Andrey Konovalov.
- DAMON cleanups from Kaixu Xia.
- DAMON work from SeongJae Park: fixes, cleanups.
- hugetlb sysfs cleanups from Muchun Song.
- Mike Kravetz fixes locking issues in hugetlbfs and in hugetlb core.
Link: https://lkml.kernel.org/r/CAOUHufZabH85CeUN-MEMgL8gJGzJEWUrkiM58JkTbBhh-jew0Q@mail.gmail.com [1]
* tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (555 commits)
hugetlb: allocate vma lock for all sharable vmas
hugetlb: take hugetlb vma_lock when clearing vma_lock->vma pointer
hugetlb: fix vma lock handling during split vma and range unmapping
mglru: mm/vmscan.c: fix imprecise comments
mm/mglru: don't sync disk for each aging cycle
mm: memcontrol: drop dead CONFIG_MEMCG_SWAP config symbol
mm: memcontrol: use do_memsw_account() in a few more places
mm: memcontrol: deprecate swapaccounting=0 mode
mm: memcontrol: don't allocate cgroup swap arrays when memcg is disabled
mm/secretmem: remove reduntant return value
mm/hugetlb: add available_huge_pages() func
mm: remove unused inline functions from include/linux/mm_inline.h
selftests/vm: add selftest for MADV_COLLAPSE of uffd-minor memory
selftests/vm: add file/shmem MADV_COLLAPSE selftest for cleared pmd
selftests/vm: add thp collapse shmem testing
selftests/vm: add thp collapse file and tmpfs testing
selftests/vm: modularize thp collapse memory operations
selftests/vm: dedup THP helpers
mm/khugepaged: add tracepoint to hpage_collapse_scan_file()
mm/madvise: add file and shmem support to MADV_COLLAPSE
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Debuggability:
- Change most occurances of BUG_ON() to WARN_ON_ONCE()
- Reorganize & fix TASK_ state comparisons, turn it into a bitmap
- Update/fix misc scheduler debugging facilities
Load-balancing & regular scheduling:
- Improve the behavior of the scheduler in presence of lot of
SCHED_IDLE tasks - in particular they should not impact other
scheduling classes.
- Optimize task load tracking, cleanups & fixes
- Clean up & simplify misc load-balancing code
Freezer:
- Rewrite the core freezer to behave better wrt thawing and be
simpler in general, by replacing PF_FROZEN with TASK_FROZEN &
fixing/adjusting all the fallout.
Deadline scheduler:
- Fix the DL capacity-aware code
- Factor out dl_task_is_earliest_deadline() &
replenish_dl_new_period()
- Relax/optimize locking in task_non_contending()
Cleanups:
- Factor out the update_current_exec_runtime() helper
- Various cleanups, simplifications"
* tag 'sched-core-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits)
sched: Fix more TASK_state comparisons
sched: Fix TASK_state comparisons
sched/fair: Move call to list_last_entry() in detach_tasks
sched/fair: Cleanup loop_max and loop_break
sched/fair: Make sure to try to detach at least one movable task
sched: Show PF_flag holes
freezer,sched: Rewrite core freezer logic
sched: Widen TAKS_state literals
sched/wait: Add wait_event_state()
sched/completion: Add wait_for_completion_state()
sched: Add TASK_ANY for wait_task_inactive()
sched: Change wait_task_inactive()s match_state
freezer,umh: Clean up freezer/initrd interaction
freezer: Have {,un}lock_system_sleep() save/restore flags
sched: Rename task_running() to task_on_cpu()
sched/fair: Cleanup for SIS_PROP
sched/fair: Default to false in test_idle_cores()
sched/fair: Remove useless check in select_idle_core()
sched/fair: Avoid double search on same cpu
sched/fair: Remove redundant check in select_idle_smt()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull ptrace update from Eric Biederman:
"ptrace: Stop supporting SIGKILL for PTRACE_EVENT_EXIT
Recently I had a conversation where it was pointed out to me that
SIGKILL sent to a tracee stropped in PTRACE_EVENT_EXIT is quite
difficult for a tracer to handle.
Keeping SIGKILL working after the process has been killed is pain from
an implementation point of view.
So since the debuggers don't want this behavior let's see if we can
remove this wart for the userspace API
If a regression is detected it should only need to be the last change
that is the reverted. The other two are just general cleanups that
make the last patch simpler"
* tag 'signal-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
signal: Drop signals received after a fatal signal has been processed
signal: Guarantee that SIGNAL_GROUP_EXIT is set on process exit
signal: Ensure SIGNAL_GROUP_EXIT gets set in do_group_exit
|
|
Let me count the ways in which I'd screwed up:
* when emitting a page, handling of gaps in coredump should happen
before fetching the current file position.
* fix for a problem that occurs on rather uncommon setups (and hadn't
been observed in the wild) had been sent very late in the cycle.
* ... with badly insufficient testing, introducing an easily
reproducible breakage. Without giving it time to soak in -next.
Fucked-up-by: Al Viro <viro@zeniv.linux.org.uk>
Reported-by: "J. R. Okajima" <hooanon05g@gmail.com>
Tested-by: "J. R. Okajima" <hooanon05g@gmail.com>
Fixes: 06bbaa6dc53c "[coredump] don't use __kernel_write() on kmap_local_page()"
Cc: stable@kernel.org # v6.0-only
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
passing kmap_local_page() result to __kernel_write() is unsafe -
random ->write_iter() might (and 9p one does) get unhappy when
passed ITER_KVEC with pointer that came from kmap_local_page().
Fix by providing a variant of __kernel_write() that takes an iov_iter
from caller (__kernel_write() becomes a trivial wrapper) and adding
dump_emit_page() that parallels dump_emit(), except that instead of
__kernel_write() it uses __kernel_write_iter() with ITER_BVEC source.
Fixes: 3159ed57792b "fs/coredump: use kmap_local_page()"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Use the Maple Tree iterator instead. This is too complicated for the VMA
iterator to handle, so let's open-code it for now. If this turns out to
be a common pattern, we can migrate it to common code.
Link: https://lkml.kernel.org/r/20220906194824.2110408-41-Liam.Howlett@oracle.com
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Tested-by: Yu Zhao <yuzhao@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Rewrite the core freezer to behave better wrt thawing and be simpler
in general.
By replacing PF_FROZEN with TASK_FROZEN, a special block state, it is
ensured frozen tasks stay frozen until thawed and don't randomly wake
up early, as is currently possible.
As such, it does away with PF_FROZEN and PF_FREEZER_SKIP, freeing up
two PF_flags (yay!).
Specifically; the current scheme works a little like:
freezer_do_not_count();
schedule();
freezer_count();
And either the task is blocked, or it lands in try_to_freezer()
through freezer_count(). Now, when it is blocked, the freezer
considers it frozen and continues.
However, on thawing, once pm_freezing is cleared, freezer_count()
stops working, and any random/spurious wakeup will let a task run
before its time.
That is, thawing tries to thaw things in explicit order; kernel
threads and workqueues before doing bringing SMP back before userspace
etc.. However due to the above mentioned races it is entirely possible
for userspace tasks to thaw (by accident) before SMP is back.
This can be a fatal problem in asymmetric ISA architectures (eg ARMv9)
where the userspace task requires a special CPU to run.
As said; replace this with a special task state TASK_FROZEN and add
the following state transitions:
TASK_FREEZABLE -> TASK_FROZEN
__TASK_STOPPED -> TASK_FROZEN
__TASK_TRACED -> TASK_FROZEN
The new TASK_FREEZABLE can be set on any state part of TASK_NORMAL
(IOW. TASK_INTERRUPTIBLE and TASK_UNINTERRUPTIBLE) -- any such state
is already required to deal with spurious wakeups and the freezer
causes one such when thawing the task (since the original state is
lost).
The special __TASK_{STOPPED,TRACED} states *can* be restored since
their canonical state is in ->jobctl.
With this, frozen tasks need an explicit TASK_FROZEN wakeup and are
free of undue (early / spurious) wakeups.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20220822114649.055452969@infradead.org
|
|
Now that wait_task_inactive()'s @match_state argument is a mask (like
ttwu()) it is possible to replace the special !match_state case with
an 'all-states' value such that any blocked state will match.
Suggested-by: Ingo Molnar (mingo@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/YxhkzfuFTvRnpUaH@hirez.programming.kicks-ass.net
|
|
In 403bad72b67d ("coredump: only SIGKILL should interrupt the
coredumping task") Oleg modified the kernel to drop all signals that
come in during a coredump except SIGKILL, and suggested that it might
be a good idea to generalize that to other cases after the process has
received a fatal signal.
Semantically it does not make sense to perform any signal delivery
after the process has already been killed.
When a signal is sent while a process is dying today the signal is
placed in the signal queue by __send_signal and a single task of the
process is woken up with signal_wake_up, if there are any tasks that
have not set PF_EXITING.
Take things one step farther and have prepare_signal report that all
signals that come after a process has been killed should be ignored.
While retaining the historical exception of allowing SIGKILL to
interrupt coredumps.
Update the comment in fs/coredump.c to make it clear coredumps are
special in being able to receive SIGKILL.
This changes things so that a process stopped in PTRACE_EVENT_EXIT can
not be made to escape it's ptracer and finish exiting by sending it
SIGKILL. That a process can be made to leave PTRACE_EVENT_EXIT and
escape it's tracer by sending the process a SIGKILL has been
complicating tracer's for no apparent advantage. If the process needs
to be made to leave PTRACE_EVENT_EXIT all that needs to happen is to
kill the proceses's tracer. This differs from the coredump code where
there is no other mechanism besides honoring SIGKILL to expedite the
end of coredumping.
Link: https://lkml.kernel.org/r/875yksd4s9.fsf_-_@email.froward.int.ebiederm.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
Now vfs_llseek() can simply check for FMODE_LSEEK; if it's set,
we know that ->llseek() won't be NULL and if it's not we should
just fail with -ESPIPE.
A couple of other places where we used to check for special
values of ->llseek() (somewhat inconsistently) switched to
checking FMODE_LSEEK.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull ptrace cleanups from Eric Biederman:
"This set of changes removes tracehook.h, moves modification of all of
the ptrace fields inside of siglock to remove races, adds a missing
permission check to ptrace.c
The removal of tracehook.h is quite significant as it has been a major
source of confusion in recent years. Much of that confusion was around
task_work and TIF_NOTIFY_SIGNAL (which I have now decoupled making the
semantics clearer).
For people who don't know tracehook.h is a vestiage of an attempt to
implement uprobes like functionality that was never fully merged, and
was later superseeded by uprobes when uprobes was merged. For many
years now we have been removing what tracehook functionaly a little
bit at a time. To the point where anything left in tracehook.h was
some weird strange thing that was difficult to understand"
* tag 'ptrace-cleanups-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
ptrace: Remove duplicated include in ptrace.c
ptrace: Check PTRACE_O_SUSPEND_SECCOMP permission on PTRACE_SEIZE
ptrace: Return the signal to continue with from ptrace_stop
ptrace: Move setting/clearing ptrace_message into ptrace_stop
tracehook: Remove tracehook.h
resume_user_mode: Move to resume_user_mode.h
resume_user_mode: Remove #ifdef TIF_NOTIFY_RESUME in set_notify_resume
signal: Move set_notify_signal and clear_notify_signal into sched/signal.h
task_work: Decouple TIF_NOTIFY_SIGNAL and task_work
task_work: Call tracehook_notify_signal from get_signal on all architectures
task_work: Introduce task_work_pending
task_work: Remove unnecessary include from posix_timers.h
ptrace: Remove tracehook_signal_handler
ptrace: Remove arch_syscall_{enter,exit}_tracehook
ptrace: Create ptrace_report_syscall_{entry,exit} in ptrace.h
ptrace/arm: Rename tracehook_report_syscall report_syscall
ptrace: Move ptrace_report_syscall into ptrace.h
|
|
Now that all of the definitions have moved out of tracehook.h into
ptrace.h, sched/signal.h, resume_user_mode.h there is nothing left in
tracehook.h so remove it.
Update the few files that were depending upon tracehook.h to bring in
definitions to use the headers they need directly.
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20220309162454.123006-13-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
Matthew Wilcox reported that there is a missing mmap_lock in
file_files_note that could possibly lead to a user after free.
Solve this by using the existing vma snapshot for consistency
and to avoid the need to take the mmap_lock anywhere in the
coredump code except for dump_vma_snapshot.
Update the dump_vma_snapshot to capture vm_pgoff and vm_file
that are neeeded by fill_files_note.
Add free_vma_snapshot to free the captured values of vm_file.
Reported-by: Matthew Wilcox <willy@infradead.org>
Link: https://lkml.kernel.org/r/20220131153740.2396974-1-willy@infradead.org
Cc: stable@vger.kernel.org
Fixes: a07279c9a8cd ("binfmt_elf, binfmt_elf_fdpic: use a VMA list snapshot")
Fixes: 2aa362c49c31 ("coredump: extend core dump note section to contain file names of mapped files")
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
The condition is impossible and to the best of my knowledge has never
triggered.
We are in deep trouble if that conditions happens and we walk past
the end of our allocated array.
So delete the WARN_ON and the code that makes it look like the kernel
can handle the case of walking past the end of it's vma_meta array.
Reviewed-by: Jann Horn <jannh@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
Move the call of dump_vma_snapshot and kvfree(vma_meta) out of the
individual coredump routines into do_coredump itself. This makes
the code less error prone and easier to maintain.
Make the vma snapshot available to the coredump routines
in struct coredump_params. This makes it easier to
change and update what is captures in the vma snapshot
and will be needed for fixing fill_file_notes.
Reviewed-by: Jann Horn <jannh@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
When I rewrote the VMA dumping logic for coredumps, I changed it to
recognize ELF library mappings based on the file being executable instead
of the mapping having an ELF header. But turns out, distros ship many ELF
libraries as non-executable, so the heuristic goes wrong...
Restore the old behavior where FILTER(ELF_HEADERS) dumps the first page of
any offset-0 readable mapping that starts with the ELF magic.
This fix is technically layer-breaking a bit, because it checks for
something ELF-specific in fs/coredump.c; but since we probably want to
share this between standard ELF and FDPIC ELF anyway, I guess it's fine?
And this also keeps the change small for backporting.
Cc: stable@vger.kernel.org
Fixes: 429a22e776a2 ("coredump: rework elf/elf_fdpic vma_dump_size() into common helper")
Reported-by: Bill Messmer <wmessmer@microsoft.com>
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220126025739.2014888-1-jannh@google.com
|
|
This moves the fs/coredump.c respective sysctls to its own file.
Link: https://lkml.kernel.org/r/20211129211943.640266-6-mcgrof@kernel.org
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: Antti Palosaari <crope@iki.fi>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Lukas Middendorf <kernel@tuxforce.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com>
Cc: Stephen Kitt <steve@sk2.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This helper is misleading. It tests for an ongoing exec as well as
the process having received a fatal signal.
Sometimes it is appropriate to treat an on-going exec differently than
a process that is shutting down due to a fatal signal. In particular
taking the fast path out of exit_signals instead of retargeting
signals is not appropriate during exec, and not changing the the exit
code in do_group_exit during exec.
Removing the helper makes it more obvious what is going on as both
cases must be coded for explicitly.
While removing the helper fix the two cases where I have observed
using signal_group_exit resulted in the wrong result.
In exit_signals only test for SIGNAL_GROUP_EXIT so that signals are
retargetted during an exec.
In do_group_exit use 0 as the exit code during an exec as de_thread
does not set group_exit_code. As best as I can determine
group_exit_code has been is set to 0 most of the time during
de_thread. During a thread group stop group_exit_code is set to the
stop signal and when the thread group receives SIGCONT group_exit_code
is reset to 0.
Link: https://lkml.kernel.org/r/20211213225350.27481-8-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
Currently the coredump code sets group_exit_task so that
signal_group_exit() will return true during a coredump. Now that the
coredump code always sets SIGNAL_GROUP_EXIT there is no longer a need
to set signal->group_exit_task.
Link: https://lkml.kernel.org/r/20211213225350.27481-6-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
After the previous cleanups "signal->core_state" is set whenever
SIGNAL_GROUP_COREDUMP is set and "signal->core_state" is tested
whenver the code wants to know if a coredump is in progress. The
remaining tests of SIGNAL_GROUP_COREDUMP also test to see if
SIGNAL_GROUP_EXIT is set. Similarly the only place that sets
SIGNAL_GROUP_COREDUMP also sets SIGNAL_GROUP_EXIT.
Which makes SIGNAL_GROUP_COREDUMP unecessary and redundant. So stop
setting SIGNAL_GROUP_COREDUMP, stop testing SIGNAL_GROUP_COREDUMP, and
remove it's definition.
With the setting of SIGNAL_GROUP_COREDUMP gone, coredump_finish no
longer needs to clear SIGNAL_GROUP_COREDUMP out of signal->flags
by setting SIGNAL_GROUP_EXIT.
Link: https://lkml.kernel.org/r/20211213225350.27481-5-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
There are only a few places that test SIGNAL_GROUP_EXIT and
are not also already testing SIGNAL_GROUP_COREDUMP.
This will not affect the callers of signal_group_exit as zap_process
also sets group_exit_task so signal_group_exit will continue to return
true at the same times.
This does not affect wait_task_zombie as the none of the threads
wind up in EXIT_ZOMBIE state during a coredump.
This does not affect oom_kill.c:__task_will_free_mem as
sig->core_state is tested and handled before SIGNAL_GROUP_EXIT is
tested for.
This does not affect complete_signal as signal->core_state is tested
for to ensure the coredump case is handled appropriately.
Link: https://lkml.kernel.org/r/20211213225350.27481-4-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
Today when a signal is delivered with a handler of SIG_DFL whose
default behavior is to generate a core dump not only that process but
every process that shares the mm is killed.
In the case of vfork this looks like a real world problem. Consider
the following well defined sequence.
if (vfork() == 0) {
execve(...);
_exit(EXIT_FAILURE);
}
If a signal that generates a core dump is received after vfork but
before the execve changes the mm the process that called vfork will
also be killed (as the mm is shared).
Similarly if the execve fails after the point of no return the kernel
delivers SIGSEGV which will kill both the exec'ing process and because
the mm is shared the process that called vfork as well.
As far as I can tell this behavior is a violation of people's
reasonable expectations, POSIX, and is unnecessarily fragile when the
system is low on memory.
Solve this by making a userspace visible change to only kill a single
process/thread group. This is possible because Jann Horn recently
modified[1] the coredump code so that the mm can safely be modified
while the coredump is happening. With LinuxThreads long gone I don't
expect anyone to have a notice this behavior change in practice.
To accomplish this move the core_state pointer from mm_struct to
signal_struct, which allows different thread groups to coredump
simultatenously.
In zap_threads remove the work to kill anything except for the current
thread group.
v2: Remove core_state from the VM_BUG_ON_MM print to fix
compile failure when CONFIG_DEBUG_VM is enabled.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
[1] a07279c9a8cd ("binfmt_elf, binfmt_elf_fdpic: use a VMA list snapshot")
Fixes: d89f3847def4 ("[PATCH] thread-aware coredumps, 2.5.43-C3")
History-tree: git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git
Link: https://lkml.kernel.org/r/87y27mvnke.fsf@disp2133
Link: https://lkml.kernel.org/r/20211007144701.67592574@canb.auug.org.au
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
Rename coredump_exit_mm to coredump_task_exit and call it from do_exit
before PTRACE_EVENT_EXIT, and before any cleanup work for a task
happens. This ensures that an accurate copy of the process can be
captured in the coredump as no cleanup for the process happens before
the coredump completes. This also ensures that PTRACE_EVENT_EXIT
will not be visited by any thread until the coredump is complete.
Add a new flag PF_POSTCOREDUMP so that tasks that have passed through
coredump_task_exit can be recognized and ignored in zap_process.
Now that all of the coredumping happens before exit_mm remove code to
test for a coredump in progress from mm_release.
Replace "may_ptrace_stop()" with a simple test of "current->ptrace".
The other tests in may_ptrace_stop all concern avoiding stopping
during a coredump. These tests are no longer necessary as it is now
guaranteed that fatal_signal_pending will be set if the code enters
ptrace_stop during a coredump. The code in ptrace_stop is guaranteed
not to stop if fatal_signal_pending returns true.
Until this change "ptrace_event(PTRACE_EVENT_EXIT)" could call
ptrace_stop without fatal_signal_pending being true, as signals are
dequeued in get_signal before calling do_exit. This is no longer
an issue as "ptrace_event(PTRACE_EVENT_EXIT)" is no longer reached
until after the coredump completes.
Link: https://lkml.kernel.org/r/874kaax26c.fsf@disp2133
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
Separate the coredump logic from the ordinary exit_mm logic
by moving the coredump logic out of exit_mm into it's own
function coredump_exit_mm.
Link: https://lkml.kernel.org/r/87a6k2x277.fsf@disp2133
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
dump_vma_snapshot() allocs memory for *vma_meta, when dump_vma_snapshot()
returns -EFAULT, the memory will be leaked, so we free it correctly.
Link: https://lkml.kernel.org/r/20210810020441.62806-1-qiuxi1@huawei.com
Fixes: a07279c9a8cd7 ("binfmt_elf, binfmt_elf_fdpic: use a VMA list snapshot")
Signed-off-by: QiuXi <qiuxi1@huawei.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jann Horn <jannh@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
For obvious security reasons, a core dump is aborted if the filesystem
cannot preserve ownership or permissions of the dump file.
This affects filesystems like e.g. vfat, but also something like a 9pfs
share in a Qemu test setup, running as a regular user, depending on the
security model used. In those cases, the result is an empty core file and
a confused user.
To hopefully save other people a lot of time figuring out the cause, this
patch adds a simple log message for those specific cases.
[akpm@linux-foundation.org: s/|%s/%s/ in printk text]
Link: https://lkml.kernel.org/r/20210701233151.102720-1-david.oberhollenzer@sigma-star.at
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs name lookup updates from Al Viro:
"Small namei.c patch series, mostly to simplify the rules for nameidata
state. It's actually from the previous cycle - but I didn't post it
for review in time...
Changes visible outside of fs/namei.c: file_open_root() calling
conventions change, some freed bits in LOOKUP_... space"
* 'work.namei' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
namei: make sure nd->depth is always valid
teach set_nameidata() to handle setting the root as well
take LOOKUP_{ROOT,ROOT_GRABBED,JUMPED} out of LOOKUP_... space
switch file_open_root() to struct path
|
|
Olivier Langlois has been struggling with coredumps being incompletely written in
processes using io_uring.
Olivier Langlois <olivier@trillion01.com> writes:
> io_uring is a big user of task_work and any event that io_uring made a
> task waiting for that occurs during the core dump generation will
> generate a TIF_NOTIFY_SIGNAL.
>
> Here are the detailed steps of the problem:
> 1. io_uring calls vfs_poll() to install a task to a file wait queue
> with io_async_wake() as the wakeup function cb from io_arm_poll_handler()
> 2. wakeup function ends up calling task_work_add() with TWA_SIGNAL
> 3. task_work_add() sets the TIF_NOTIFY_SIGNAL bit by calling
> set_notify_signal()
The coredump code deliberately supports being interrupted by SIGKILL,
and depends upon prepare_signal to filter out all other signals. Now
that signal_pending includes wake ups for TIF_NOTIFY_SIGNAL this hack
in dump_emitted by the coredump code no longer works.
Make the coredump code more robust by explicitly testing for all of
the wakeup conditions the coredump code supports. This prevents
new wakeup conditions from breaking the coredump code, as well
as fixing the current issue.
The filesystem code that the coredump code uses already limits
itself to only aborting on fatal_signal_pending. So it should
not develop surprising wake-up reasons either.
v2: Don't remove the now unnecessary code in prepare_signal.
Cc: stable@vger.kernel.org
Fixes: 12db8b690010 ("entry: Add support for TIF_NOTIFY_SIGNAL")
Reported-by: Olivier Langlois <olivier@trillion01.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
... and provide file_open_root_mnt(), using the root of given mount.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
have dump_skip() just remember how much needs to be skipped,
leave actual seeks/writing zeroes to the next dump_emit()
or the end of coredump output, whichever comes first.
And instead of playing with do_truncate() in the end, just
write one NUL at the end of the last gap (if any).
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
In dump_user_range() there is no reason for the mapping to be global. Use
kmap_local_page() rather than kmap.
Link: https://lkml.kernel.org/r/20210203223328.558945-1-ira.weiny@intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When truncating files the vfs will verify that the caller is privileged
over the inode. Extend it to handle idmapped mounts. If the inode is
accessed through an idmapped mount it is mapped according to the mount's
user namespace. Afterwards the permissions checks are identical to
non-idmapped mounts. If the initial user namespace is passed nothing
changes so non-idmapped mounts will see identical behavior as before.
Link: https://lore.kernel.org/r/20210121131959.646623-16-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull execve updates from Eric Biederman:
"This set of changes ultimately fixes the interaction of posix file
lock and exec. Fundamentally most of the change is just moving where
unshare_files is called during exec, and tweaking the users of
files_struct so that the count of files_struct is not unnecessarily
played with.
Along the way fcheck and related helpers were renamed to more
accurately reflect what they do.
There were also many other small changes that fell out, as this is the
first time in a long time much of this code has been touched.
Benchmarks haven't turned up any practical issues but Al Viro has
observed a possibility for a lot of pounding on task_lock. So I have
some changes in progress to convert put_files_struct to always rcu
free files_struct. That wasn't ready for the merge window so that will
have to wait until next time"
* 'exec-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (27 commits)
exec: Move io_uring_task_cancel after the point of no return
coredump: Document coredump code exclusively used by cell spufs
file: Remove get_files_struct
file: Rename __close_fd_get_file close_fd_get_file
file: Replace ksys_close with close_fd
file: Rename __close_fd to close_fd and remove the files parameter
file: Merge __alloc_fd into alloc_fd
file: In f_dupfd read RLIMIT_NOFILE once.
file: Merge __fd_install into fd_install
proc/fd: In fdinfo seq_show don't use get_files_struct
bpf/task_iter: In task_file_seq_get_next use task_lookup_next_fd_rcu
proc/fd: In proc_readfd_common use task_lookup_next_fd_rcu
file: Implement task_lookup_next_fd_rcu
kcmp: In get_file_raw_ptr use task_lookup_fd_rcu
proc/fd: In tid_fd_mode use task_lookup_fd_rcu
file: Implement task_lookup_fd_rcu
file: Rename fcheck lookup_fd_rcu
file: Replace fcheck_files with files_lookup_fd_rcu
file: Factor files_lookup_fd_locked out of fcheck_files
file: Rename __fcheck_files to files_lookup_fd_raw
...
|
|
Oleg Nesterov recently asked[1] why is there an unshare_files in
do_coredump. After digging through all of the callers of lookup_fd it
turns out that it is
arch/powerpc/platforms/cell/spufs/coredump.c:coredump_next_context
that needs the unshare_files in do_coredump.
Looking at the history[2] this code was also the only piece of coredump code
that required the unshare_files when the unshare_files was added.
Looking at that code it turns out that cell is also the only
architecture that implements elf_coredump_extra_notes_size and
elf_coredump_extra_notes_write.
I looked at the gdb repo[3] support for cell has been removed[4] in binutils
2.34. Geoff Levand reports he is still getting questions on how to
run modern kernels on the PS3, from people using 3rd party firmware so
this code is not dead. According to Wikipedia the last PS3 shipped in
Japan sometime in 2017. So it will probably be a little while before
everyone's hardware dies.
Add some comments briefly documenting the coredump code that exists
only to support cell spufs to make it easier to understand the
coredump code. Eventually the hardware will be dead, or their won't
be userspace tools, or the coredump code will be refactored and it
will be too difficult to update a dead architecture and these comments
make it easy to tell where to pull to remove cell spufs support.
[1] https://lkml.kernel.org/r/20201123175052.GA20279@redhat.com
[2] 179e037fc137 ("do_coredump(): make sure that descriptor table isn't shared")
[3] git://sourceware.org/git/binutils-gdb.git
[4] abf516c6931a ("Remove Cell Broadband Engine debugging support").
Link: https://lkml.kernel.org/r/87h7pdnlzv.fsf_-_@x220.int.ebiederm.org
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
Now that exec no longer needs to return the unshared files to their
previous value there is no reason to return displaced.
Instead when unshare_fd creates a copy of the file table, call
put_files_struct before returning from unshare_files.
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
v1: https://lkml.kernel.org/r/20200817220425.9389-2-ebiederm@xmission.com
Link: https://lkml.kernel.org/r/20201120231441.29911-2-ebiederm@xmission.com
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
'format_corename()' will splite 'core_pattern' on spaces when it is in
pipe mode, and take helper_argv[0] as the path to usermode executable.
It works fine in most cases.
However, if there is a space between '|' and '/file/path', such as
'| /usr/lib/systemd/systemd-coredump %P %u %g', then helper_argv[0] will
be parsed as '', and users will get a 'Core dump to | disabled'.
It is not friendly to users, as the pattern above was valid previously.
Fix this by ignoring the spaces between '|' and '/file/path'.
Fixes: 315c69261dd3 ("coredump: split pipe command whitespace before expanding template")
Signed-off-by: Menglong Dong <dong.menglong@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul Wise <pabs3@bonedaddy.net>
Cc: Jakub Wilk <jwilk@jwilk.net> [https://bugs.debian.org/924398]
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/5fb62870.1c69fb81.8ef5d.af76@mx.google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In both binfmt_elf and binfmt_elf_fdpic, use a new helper
dump_vma_snapshot() to take a snapshot of the VMA list (including the gate
VMA, if we have one) while protected by the mmap_lock, and then use that
snapshot instead of walking the VMA list without locking.
An alternative approach would be to keep the mmap_lock held across the
entire core dumping operation; however, keeping the mmap_lock locked while
we may be blocked for an unbounded amount of time (e.g. because we're
dumping to a FUSE filesystem or so) isn't really optimal; the mmap_lock
blocks things like the ->release handler of userfaultfd, and we don't
really want critical system daemons to grind to a halt just because
someone "gifted" them SCM_RIGHTS to an eternally-locked userfaultfd, or
something like that.
Since both the normal ELF code and the FDPIC ELF code need this
functionality (and if any other binfmt wants to add coredump support in
the future, they'd probably need it, too), implement this with a common
helper in fs/coredump.c.
A downside of this approach is that we now need a bigger amount of kernel
memory per userspace VMA in the normal ELF case, and that we need O(n)
kernel memory in the FDPIC ELF case at all; but 40 bytes per VMA shouldn't
be terribly bad.
There currently is a data race between stack expansion and anything that
reads ->vm_start or ->vm_end under the mmap_lock held in read mode; to
mitigate that for core dumping, take the mmap_lock in write mode when
taking a snapshot of the VMA hierarchy. (If we only took the mmap_lock in
read mode, we could end up with a corrupted core dump if someone does
get_user_pages_remote() concurrently. Not really a major problem, but
taking the mmap_lock either way works here, so we might as well avoid the
issue.) (This doesn't do anything about the existing data races with stack
expansion in other mm code.)
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Link: http://lkml.kernel.org/r/20200827114932.3572699-6-jannh@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
At the moment, the binfmt_elf and binfmt_elf_fdpic code have slightly
different code to figure out which VMAs should be dumped, and if so,
whether the dump should contain the entire VMA or just its first page.
Eliminate duplicate code by reworking the binfmt_elf version into a
generic core dumping helper in coredump.c.
As part of that, change the heuristic for detecting executable/library
header pages to check whether the inode is executable instead of looking
at the file mode.
This is less problematic in terms of locking because it lets us avoid
get_user() under the mmap_sem. (And arguably it looks nicer and makes
more sense in generic code.)
Adjust a little bit based on the binfmt_elf_fdpic version: ->anon_vma is
only meaningful under CONFIG_MMU, otherwise we have to assume that the VMA
has been written to.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Link: http://lkml.kernel.org/r/20200827114932.3572699-5-jannh@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Both fs/binfmt_elf.c and fs/binfmt_elf_fdpic.c need to dump ranges of
pages into the coredump file. Extract that logic into a common helper.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Link: http://lkml.kernel.org/r/20200827114932.3572699-4-jannh@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
dump_emit() has a retry loop, but there seems to be no way for that retry
logic to actually be used; and it was also buggy, writing the same data
repeatedly after a short write.
Let's just bail out on a short write.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Link: http://lkml.kernel.org/r/20200827114932.3572699-3-jannh@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The document reads "%e" should be "executable filename" while actually it
could be changed by things like pr_ctl PR_SET_NAME. People who uses "%e"
in core_pattern get surprised when they find out they get thread name
instead of executable filename.
This is either a bug of document or a bug of code. Since the behavior of
"%e" is there for long time, it could bring another surprise for users if
we "fix" the code.
So we just "fix" the document. And more, for users who really need the
"executable filename" in core_pattern, we introduce a new "%f" for the
real executable filename. We already have "%E" for executable path in
kernel, so just reuse most of its code for the new added "%f" format.
Signed-off-by: Lepton Wu <ytht.net@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200701031432.2978761-1-ytht.net@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Convert comments that reference mmap_sem to reference mmap_lock instead.
[akpm@linux-foundation.org: fix up linux-next leftovers]
[akpm@linux-foundation.org: s/lockaphore/lock/, per Vlastimil]
[akpm@linux-foundation.org: more linux-next fixups, per Michel]
Signed-off-by: Michel Lespinasse <walken@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Laurent Dufour <ldufour@linux.ibm.com>
Cc: Liam Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ying Han <yinghan@google.com>
Link: http://lkml.kernel.org/r/20200520052908.204642-13-walken@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This change converts the existing mmap_sem rwsem calls to use the new mmap
locking API instead.
The change is generated using coccinelle with the following rule:
// spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir .
@@
expression mm;
@@
(
-init_rwsem
+mmap_init_lock
|
-down_write
+mmap_write_lock
|
-down_write_killable
+mmap_write_lock_killable
|
-down_write_trylock
+mmap_write_trylock
|
-up_write
+mmap_write_unlock
|
-downgrade_write
+mmap_write_downgrade
|
-down_read
+mmap_read_lock
|
-down_read_killable
+mmap_read_lock_killable
|
-down_read_trylock
+mmap_read_trylock
|
-up_read
+mmap_read_unlock
)
-(&mm->mmap_sem)
+(mm)
Signed-off-by: Michel Lespinasse <walken@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Liam Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ying Han <yinghan@google.com>
Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 64e90a8acb859 ("Introduce STATIC_USERMODEHELPER to mediate
call_usermodehelper()") added the optiont to disable all
call_usermodehelper() calls by setting STATIC_USERMODEHELPER_PATH to
an empty string. When this is done, and crashdump is triggered, it
will crash on null pointer dereference, since we make assumptions
over what call_usermodehelper_exec() did.
This has been reported by Sergey when one triggers a a coredump
with the following configuration:
```
CONFIG_STATIC_USERMODEHELPER=y
CONFIG_STATIC_USERMODEHELPER_PATH=""
kernel.core_pattern = |/usr/lib/systemd/systemd-coredump %P %u %g %s %t %c %h %e
```
The way disabling the umh was designed was that call_usermodehelper_exec()
would just return early, without an error. But coredump assumes
certain variables are set up for us when this happens, and calls
ile_start_write(cprm.file) with a NULL file.
[ 2.819676] BUG: kernel NULL pointer dereference, address: 0000000000000020
[ 2.819859] #PF: supervisor read access in kernel mode
[ 2.820035] #PF: error_code(0x0000) - not-present page
[ 2.820188] PGD 0 P4D 0
[ 2.820305] Oops: 0000 [#1] SMP PTI
[ 2.820436] CPU: 2 PID: 89 Comm: a Not tainted 5.7.0-rc1+ #7
[ 2.820680] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190711_202441-buildvm-armv7-10.arm.fedoraproject.org-2.fc31 04/01/2014
[ 2.821150] RIP: 0010:do_coredump+0xd80/0x1060
[ 2.821385] Code: e8 95 11 ed ff 48 c7 c6 cc a7 b4 81 48 8d bd 28 ff
ff ff 89 c2 e8 70 f1 ff ff 41 89 c2 85 c0 0f 84 72 f7 ff ff e9 b4 fe ff
ff <48> 8b 57 20 0f b7 02 66 25 00 f0 66 3d 00 8
0 0f 84 9c 01 00 00 44
[ 2.822014] RSP: 0000:ffffc9000029bcb8 EFLAGS: 00010246
[ 2.822339] RAX: 0000000000000000 RBX: ffff88803f860000 RCX: 000000000000000a
[ 2.822746] RDX: 0000000000000009 RSI: 0000000000000282 RDI: 0000000000000000
[ 2.823141] RBP: ffffc9000029bde8 R08: 0000000000000000 R09: ffffc9000029bc00
[ 2.823508] R10: 0000000000000001 R11: ffff88803dec90be R12: ffffffff81c39da0
[ 2.823902] R13: ffff88803de84400 R14: 0000000000000000 R15: 0000000000000000
[ 2.824285] FS: 00007fee08183540(0000) GS:ffff88803e480000(0000) knlGS:0000000000000000
[ 2.824767] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2.825111] CR2: 0000000000000020 CR3: 000000003f856005 CR4: 0000000000060ea0
[ 2.825479] Call Trace:
[ 2.825790] get_signal+0x11e/0x720
[ 2.826087] do_signal+0x1d/0x670
[ 2.826361] ? force_sig_info_to_task+0xc1/0xf0
[ 2.826691] ? force_sig_fault+0x3c/0x40
[ 2.826996] ? do_trap+0xc9/0x100
[ 2.827179] exit_to_usermode_loop+0x49/0x90
[ 2.827359] prepare_exit_to_usermode+0x77/0xb0
[ 2.827559] ? invalid_op+0xa/0x30
[ 2.827747] ret_from_intr+0x20/0x20
[ 2.827921] RIP: 0033:0x55e2c76d2129
[ 2.828107] Code: 2d ff ff ff e8 68 ff ff ff 5d c6 05 18 2f 00 00 01
c3 0f 1f 80 00 00 00 00 c3 0f 1f 80 00 00 00 00 e9 7b ff ff ff 55 48 89
e5 <0f> 0b b8 00 00 00 00 5d c3 66 2e 0f 1f 84 0
0 00 00 00 00 0f 1f 40
[ 2.828603] RSP: 002b:00007fffeba5e080 EFLAGS: 00010246
[ 2.828801] RAX: 000055e2c76d2125 RBX: 0000000000000000 RCX: 00007fee0817c718
[ 2.829034] RDX: 00007fffeba5e188 RSI: 00007fffeba5e178 RDI: 0000000000000001
[ 2.829257] RBP: 00007fffeba5e080 R08: 0000000000000000 R09: 00007fee08193c00
[ 2.829482] R10: 0000000000000009 R11: 0000000000000000 R12: 000055e2c76d2040
[ 2.829727] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[ 2.829964] CR2: 0000000000000020
[ 2.830149] ---[ end trace ceed83d8c68a1bf1 ]---
```
Cc: <stable@vger.kernel.org> # v4.11+
Fixes: 64e90a8acb85 ("Introduce STATIC_USERMODEHELPER to mediate call_usermodehelper()")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199795
Reported-by: Tony Vroon <chainsaw@gentoo.org>
Reported-by: Sergey Kvachonok <ravenexp@gmail.com>
Tested-by: Sergei Trofimovich <slyfox@gentoo.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20200416162859.26518-1-mcgrof@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If the core_pattern is set to "|" and any process segfaults then we get
a null pointer derefernce while trying to coredump. The call stack shows:
RIP: do_coredump+0x628/0x11c0
When the core_pattern has only "|" there is no use of trying the
coredump and we can check that while formating the corename and exit
with an error.
After this change I get:
format_corename failed
Aborting core
Fixes: 315c69261dd3 ("coredump: split pipe command whitespace before expanding template")
Reported-by: Matthew Ruffell <matthew.ruffell@canonical.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul Wise <pabs3@bonedaddy.net>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200416194612.21418-1-sudipm.mukherjee@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This makes the pipe code use separate wait-queues and exclusive waiting
for readers and writers, avoiding a nasty thundering herd problem when
there are lots of readers waiting for data on a pipe (or, less commonly,
lots of writers waiting for a pipe to have space).
While this isn't a common occurrence in the traditional "use a pipe as a
data transport" case, where you typically only have a single reader and
a single writer process, there is one common special case: using a pipe
as a source of "locking tokens" rather than for data communication.
In particular, the GNU make jobserver code ends up using a pipe as a way
to limit parallelism, where each job consumes a token by reading a byte
from the jobserver pipe, and releases the token by writing a byte back
to the pipe.
This pattern is fairly traditional on Unix, and works very well, but
will waste a lot of time waking up a lot of processes when only a single
reader needs to be woken up when a writer releases a new token.
A simplified test-case of just this pipe interaction is to create 64
processes, and then pass a single token around between them (this
test-case also intentionally passes another token that gets ignored to
test the "wake up next" logic too, in case anybody wonders about it):
#include <unistd.h>
int main(int argc, char **argv)
{
int fd[2], counters[2];
pipe(fd);
counters[0] = 0;
counters[1] = -1;
write(fd[1], counters, sizeof(counters));
/* 64 processes */
fork(); fork(); fork(); fork(); fork(); fork();
do {
int i;
read(fd[0], &i, sizeof(i));
if (i < 0)
continue;
counters[0] = i+1;
write(fd[1], counters, (1+(i & 1)) *sizeof(int));
} while (counters[0] < 1000000);
return 0;
}
and in a perfect world, passing that token around should only cause one
context switch per transfer, when the writer of a token causes a
directed wakeup of just a single reader.
But with the "writer wakes all readers" model we traditionally had, on
my test box the above case causes more than an order of magnitude more
scheduling: instead of the expected ~1M context switches, "perf stat"
shows
231,852.37 msec task-clock # 15.857 CPUs utilized
11,250,961 context-switches # 0.049 M/sec
616,304 cpu-migrations # 0.003 M/sec
1,648 page-faults # 0.007 K/sec
1,097,903,998,514 cycles # 4.735 GHz
120,781,778,352 instructions # 0.11 insn per cycle
27,997,056,043 branches # 120.754 M/sec
283,581,233 branch-misses # 1.01% of all branches
14.621273891 seconds time elapsed
0.018243000 seconds user
3.611468000 seconds sys
before this commit.
After this commit, I get
5,229.55 msec task-clock # 3.072 CPUs utilized
1,212,233 context-switches # 0.232 M/sec
103,951 cpu-migrations # 0.020 M/sec
1,328 page-faults # 0.254 K/sec
21,307,456,166 cycles # 4.074 GHz
12,947,819,999 instructions # 0.61 insn per cycle
2,881,985,678 branches # 551.096 M/sec
64,267,015 branch-misses # 2.23% of all branches
1.702148350 seconds time elapsed
0.004868000 seconds user
0.110786000 seconds sys
instead. Much better.
[ Note! This kernel improvement seems to be very good at triggering a
race condition in the make jobserver (in GNU make 4.2.1) for me. It's
a long known bug that was fixed back in June 2017 by GNU make commit
b552b0525198 ("[SV 51159] Use a non-blocking read with pselect to
avoid hangs.").
But there wasn't a new release of GNU make until 4.3 on Jan 19 2020,
so a number of distributions may still have the buggy version. Some
have backported the fix to their 4.2.1 release, though, and even
without the fix it's quite timing-dependent whether the bug actually
is hit. ]
Josh Triplett says:
"I've been hammering on your pipe fix patch (switching to exclusive
wait queues) for a month or so, on several different systems, and I've
run into no issues with it. The patch *substantially* improves
parallel build times on large (~100 CPU) systems, both with parallel
make and with other things that use make's pipe-based jobserver.
All current distributions (including stable and long-term stable
distributions) have versions of GNU make that no longer have the
jobserver bug"
Tested-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Save the offsets of the start of each argument to avoid having to update
pointers to each argument after every corename krealloc and to avoid
having to duplicate the memory for the dump command.
Executable names containing spaces were previously being expanded from
%e or %E and then split in the middle of the filename. This is
incorrect behaviour since an argument list can represent arguments with
spaces.
The splitting could lead to extra arguments being passed to the core
dump handler that it might have interpreted as options or ignored
completely.
Core dump handlers that are not aware of this Linux kernel issue will be
using %e or %E without considering that it may be split and so they will
be vulnerable to processes with spaces in their names breaking their
argument list. If their internals are otherwise well written, such as
if they are written in shell but quote arguments, they will work better
after this change than before. If they are not well written, then there
is a slight chance of breakage depending on the details of the code but
they will already be fairly broken by the split filenames.
Core dump handlers that are aware of this Linux kernel issue will be
placing %e or %E as the last item in their core_pattern and then
aggregating all of the remaining arguments into one, separated by
spaces. Alternatively they will be obtaining the filename via other
methods. Both of these will be compatible with the new arrangement.
A side effect from this change is that unknown template types (for
example %z) result in an empty argument to the dump handler instead of
the argument being dropped. This is a desired change as:
It is easier for dump handlers to process empty arguments than dropped
ones, especially if they are written in shell or don't pass each
template item with a preceding command-line option in order to
differentiate between individual template types. Most core_patterns in
the wild do not use options so they can confuse different template types
(especially numeric ones) if an earlier one gets dropped in old kernels.
If the kernel introduces a new template type and a core_pattern uses it,
the core dump handler might not expect that the argument can be dropped
in old kernels.
For example, this can result in security issues when %d is dropped in
old kernels. This happened with the corekeeper package in Debian and
resulted in the interface between corekeeper and Linux having to be
rewritten to use command-line options to differentiate between template
types.
The core_pattern for most core dump handlers is written by the handler
author who would generally not insert unknown template types so this
change should be compatible with all the core dump handlers that exist.
Link: http://lkml.kernel.org/r/20190528051142.24939-1-pabs3@bonedaddy.net
Fixes: 74aadce98605 ("core_pattern: allow passing of arguments to user mode helper when core_pattern is a pipe")
Signed-off-by: Paul Wise <pabs3@bonedaddy.net>
Reported-by: Jakub Wilk <jwilk@jwilk.net> [https://bugs.debian.org/924398]
Reported-by: Paul Wise <pabs3@bonedaddy.net> [https://lore.kernel.org/linux-fsdevel/c8b7ecb8508895bf4adb62a748e2ea2c71854597.camel@bonedaddy.net/]
Suggested-by: Jakub Wilk <jwilk@jwilk.net>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Linus recently observed that if we did not worry about the padding
member in struct siginfo it is only about 48 bytes, and 48 bytes is
much nicer than 128 bytes for allocating on the stack and copying
around in the kernel.
The obvious thing of only adding the padding when userspace is
including siginfo.h won't work as there are sigframe definitions in
the kernel that embed struct siginfo.
So split siginfo in two; kernel_siginfo and siginfo. Keeping the
traditional name for the userspace definition. While the version that
is used internally to the kernel and ultimately will not be padded to
128 bytes is called kernel_siginfo.
The definition of struct kernel_siginfo I have put in include/signal_types.h
A set of buildtime checks has been added to verify the two structures have
the same field offsets.
To make it easy to verify the change kernel_siginfo retains the same
size as siginfo. The reduction in size comes in a following change.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull compat and uaccess updates from Al Viro:
- {get,put}_compat_sigset() series
- assorted compat ioctl stuff
- more set_fs() elimination
- a few more timespec64 conversions
- several removals of pointless access_ok() in places where it was
followed only by non-__ variants of primitives
* 'misc.compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (24 commits)
coredump: call do_unlinkat directly instead of sys_unlink
fs: expose do_unlinkat for built-in callers
ext4: take handling of EXT4_IOC_GROUP_ADD into a helper, get rid of set_fs()
ipmi: get rid of pointless access_ok()
pi433: sanitize ioctl
cxlflash: get rid of pointless access_ok()
mtdchar: get rid of pointless access_ok()
r128: switch compat ioctls to drm_ioctl_kernel()
selection: get rid of field-by-field copyin
VT_RESIZEX: get rid of field-by-field copyin
i2c compat ioctls: move to ->compat_ioctl()
sched_rr_get_interval(): move compat to native, get rid of set_fs()
mips: switch to {get,put}_compat_sigset()
sparc: switch to {get,put}_compat_sigset()
s390: switch to {get,put}_compat_sigset()
ppc: switch to {get,put}_compat_sigset()
parisc: switch to {get,put}_compat_sigset()
get_compat_sigset()
get rid of {get,put}_compat_itimerspec()
io_getevents: Use timespec64 to represent timeouts
...
|
|
And stop messing with the address limit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
GFP_TEMPORARY was introduced by commit e12ba74d8ff3 ("Group short-lived
and reclaimable kernel allocations") along with __GFP_RECLAIMABLE. It's
primary motivation was to allow users to tell that an allocation is
short lived and so the allocator can try to place such allocations close
together and prevent long term fragmentation. As much as this sounds
like a reasonable semantic it becomes much less clear when to use the
highlevel GFP_TEMPORARY allocation flag. How long is temporary? Can the
context holding that memory sleep? Can it take locks? It seems there is
no good answer for those questions.
The current implementation of GFP_TEMPORARY is basically GFP_KERNEL |
__GFP_RECLAIMABLE which in itself is tricky because basically none of
the existing caller provide a way to reclaim the allocated memory. So
this is rather misleading and hard to evaluate for any benefits.
I have checked some random users and none of them has added the flag
with a specific justification. I suspect most of them just copied from
other existing users and others just thought it might be a good idea to
use without any measuring. This suggests that GFP_TEMPORARY just
motivates for cargo cult usage without any reasoning.
I believe that our gfp flags are quite complex already and especially
those with highlevel semantic should be clearly defined to prevent from
confusion and abuse. Therefore I propose dropping GFP_TEMPORARY and
replace all existing users to simply use GFP_KERNEL. Please note that
SLAB users with shrinkers will still get __GFP_RECLAIMABLE heuristic and
so they will be placed properly for memory fragmentation prevention.
I can see reasons we might want some gfp flag to reflect shorterm
allocations but I propose starting from a clear semantic definition and
only then add users with proper justification.
This was been brought up before LSF this year by Matthew [1] and it
turned out that GFP_TEMPORARY really doesn't have a clear semantic. It
seems to be a heuristic without any measured advantage for most (if not
all) its current users. The follow up discussion has revealed that
opinions on what might be temporary allocation differ a lot between
developers. So rather than trying to tweak existing users into a
semantic which they haven't expected I propose to simply remove the flag
and start from scratch if we really need a semantic for short term
allocations.
[1] http://lkml.kernel.org/r/20170118054945.GD18349@bombadil.infradead.org
[akpm@linux-foundation.org: fix typo]
[akpm@linux-foundation.org: coding-style fixes]
[sfr@canb.auug.org.au: drm/i915: fix up]
Link: http://lkml.kernel.org/r/20170816144703.378d4f4d@canb.auug.org.au
Link: http://lkml.kernel.org/r/20170728091904.14627-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Neil Brown <neilb@suse.de>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
<linux/sched/task_stack.h>
We are going to split <linux/sched/task_stack.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.
Create a trivial placeholder <linux/sched/task_stack.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.
Include the new header in the files that are going to need it.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
<linux/sched/signal.h>
We are going to split <linux/sched/signal.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.
Create a trivial placeholder <linux/sched/signal.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.
Include the new header in the files that are going to need it.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
<linux/sched/coredump.h>
We are going to split <linux/sched/coredump.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.
Create a trivial placeholder <linux/sched/coredump.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.
Include the new header in the files that are going to need it.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
If the last section of a core file ends with an unmapped or zero page,
the size of the file does not correspond with the last dump_skip() call.
gdb complains that the file is truncated and can be confusing to users.
After all of the vma sections are written, make sure that the file size
is no smaller than the current file position.
This problem can be demonstrated with gdb's bigcore testcase on the
sparc architecture.
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
This was entirely automated, using the script by Al:
PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
$(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)
to do the replacement at the end of the merge window.
Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
It could be not possible to freeze coredumping task when it waits for
'core_state->startup' completion, because threads are frozen in
get_signal() before they got a chance to complete 'core_state->startup'.
Inability to freeze a task during suspend will cause suspend to fail.
Also CRIU uses cgroup freezer during dump operation. So with an
unfreezable task the CRIU dump will fail because it waits for a
transition from 'FREEZING' to 'FROZEN' state which will never happen.
Use freezer_do_not_count() to tell freezer to ignore coredumping task
while it waits for core_state->startup completion.
Link: http://lkml.kernel.org/r/1475225434-3753-1-git-send-email-aryabinin@virtuozzo.com
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Tejun Heo <tj@kernel.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The offset in the core file used to be tracked with ->written field of
the coredump_params structure. The field was retired in favour of
file->f_pos.
However, ->f_pos is not maintained for pipes which leads to breakage.
Restore explicit tracking of the offset in coredump_params. Introduce
->pos field for this purpose since ->written was already reused.
Fixes: a00839395103 ("get rid of coredump_params->written").
Reported-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Mateusz Guzik <mguzik@redhat.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
coredump_wait waits for mmap_sem for write currently which can prevent
oom_reaper to reclaim the oom victims address space asynchronously
because that requires mmap_sem for read. This might happen if the oom
victim is multi threaded and some thread(s) is holding mmap_sem for read
(e.g. page fault) and it is stuck in the page allocator while other
thread(s) reached coredump_wait already.
This patch simply uses down_write_killable and bails out with EINTR if
the lock got interrupted by the fatal signal. do_coredump will return
right away and do_group_exit will take care to zap the whole thread
group.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 9b56d54380ad ("dump_skip(): dump_seek() replacement taking
coredump_params") introduced a regression with regard to RLIMIT_CORE.
Previously, when a core dump was sparse, only the data that was actually
written out would count against the limit. Now, the sparse ranges are
also included, which leads to truncated core dumps when the actual disk
usage is still well below the limit. Restore the old behavior by only
counting what gets emitted and ignoring what gets skipped.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
cprm->written is redundant with cprm->file->f_pos, so use that instead.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
This commit fixes the following security hole affecting systems where
all of the following conditions are fulfilled:
- The fs.suid_dumpable sysctl is set to 2.
- The kernel.core_pattern sysctl's value starts with "/". (Systems
where kernel.core_pattern starts with "|/" are not affected.)
- Unprivileged user namespace creation is permitted. (This is
true on Linux >=3.8, but some distributions disallow it by
default using a distro patch.)
Under these conditions, if a program executes under secure exec rules,
causing it to run with the SUID_DUMP_ROOT flag, then unshares its user
namespace, changes its root directory and crashes, the coredump will be
written using fsuid=0 and a path derived from kernel.core_pattern - but
this path is interpreted relative to the root directory of the process,
allowing the attacker to control where a coredump will be written with
root privileges.
To fix the security issue, always interpret core_pattern for dumps that
are written under SUID_DUMP_ROOT relative to the root directory of init.
Signed-off-by: Jann Horn <jann@thejh.net>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Let %h and %e print empty values as "!", "." as "!" and
".." as "!.".
This prevents hostnames and comm values that are empty or consist of one
or two dots from changing the directory level at which the corefile will
be stored.
Consider the case where someone decides to sort coredumps by hostname
with a core pattern like "/cores/%h/core.%e.%p.%t" or so. In this
case, hostnames "" and "." would cause the coredump to land directly in
/cores, which is not what the intent behind the core pattern is, and
".." would cause the coredump to land in /.
Yeah, there probably aren't many people who do that, but I still don't
want this edgecase to be kind of broken.
It seems very unlikely that this caused security issues anywhere, so I'm
not requesting a stable backport.
[akpm@linux-foundation.org: tweak code comment]
Signed-off-by: Jann Horn <jann@thejh.net>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
struct timeval on 32-bit systems will have its tv_sec
value overflow in year 2038 and beyond.
Use a 64 bit value to print time of the coredump in seconds.
ktime_get_real_seconds is chosen here for efficiency reasons.
Suggested by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Tina Ruchandani <ruchandani.tina@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Change zap_threads() paths to use for_each_thread() rather than
while_each_thread().
While at it, change zap_threads() to avoid the nested if's to make the
code more readable and lessen the indentation.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Kyle Walker <kwalker@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Stanislav Kozina <skozina@redhat.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
task_will_free_mem() is wrong in many ways, and in particular the
SIGNAL_GROUP_COREDUMP check is not reliable: a task can participate in the
coredumping without SIGNAL_GROUP_COREDUMP bit set.
change zap_threads() paths to always set SIGNAL_GROUP_COREDUMP even if
other CLONE_VM processes can't react to SIGKILL. Fortunately, at least
oom-kill case if fine; it kills all tasks sharing the same mm, so it
should also kill the process which actually dumps the core.
The change in prepare_signal() is not strictly necessary, it just ensures
that the patch does not bring another subtle behavioural change. But it
reminds us that this SIGNAL_GROUP_EXIT/COREDUMP case needs more changes.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Kyle Walker <kwalker@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Stanislav Kozina <skozina@redhat.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
On a filesystem like vfat, all files are created with the same owner
and mode independent of who created the file. When a vfat filesystem
is mounted with root as owner of all files and read access for everyone,
root's processes left world-readable coredumps on it (but other
users' processes only left empty corefiles when given write access
because of the uid mismatch).
Given that the old behavior was inconsistent and insecure, I don't see
a problem with changing it. Now, all processes refuse to dump core unless
the resulting corefile will only be readable by their owner.
Signed-off-by: Jann Horn <jann@thejh.net>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
It was possible for an attacking user to trick root (or another user) into
writing his coredumps into an attacker-readable, pre-existing file using
rename() or link(), causing the disclosure of secret data from the victim
process' virtual memory. Depending on the configuration, it was also
possible to trick root into overwriting system files with coredumps. Fix
that issue by never writing coredumps into existing files.
Requirements for the attack:
- The attack only applies if the victim's process has a nonzero
RLIMIT_CORE and is dumpable.
- The attacker can trick the victim into coredumping into an
attacker-writable directory D, either because the core_pattern is
relative and the victim's cwd is attacker-writable or because an
absolute core_pattern pointing to a world-writable directory is used.
- The attacker has one of these:
A: on a system with protected_hardlinks=0:
execute access to a folder containing a victim-owned,
attacker-readable file on the same partition as D, and the
victim-owned file will be deleted before the main part of the attack
takes place. (In practice, there are lots of files that fulfill
this condition, e.g. entries in Debian's /var/lib/dpkg/info/.)
This does not apply to most Linux systems because most distros set
protected_hardlinks=1.
B: on a system with protected_hardlinks=1:
execute access to a folder containing a victim-owned,
attacker-readable and attacker-writable file on the same partition
as D, and the victim-owned file will be deleted before the main part
of the attack takes place.
(This seems to be uncommon.)
C: on any system, independent of protected_hardlinks:
write access to a non-sticky folder containing a victim-owned,
attacker-readable file on the same partition as D
(This seems to be uncommon.)
The basic idea is that the attacker moves the victim-owned file to where
he expects the victim process to dump its core. The victim process dumps
its core into the existing file, and the attacker reads the coredump from
it.
If the attacker can't move the file because he does not have write access
to the containing directory, he can instead link the file to a directory
he controls, then wait for the original link to the file to be deleted
(because the kernel checks that the link count of the corefile is 1).
A less reliable variant that requires D to be non-sticky works with link()
and does not require deletion of the original link: link() the file into
D, but then unlink() it directly before the kernel performs the link count
check.
On systems with protected_hardlinks=0, this variant allows an attacker to
not only gain information from coredumps, but also clobber existing,
victim-writable files with coredumps. (This could theoretically lead to a
privilege escalation.)
Signed-off-by: Jann Horn <jann@thejh.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull more vfs updates from Al Viro:
"Assorted VFS fixes and related cleanups (IMO the most interesting in
that part are f_path-related things and Eric's descriptor-related
stuff). UFS regression fixes (it got broken last cycle). 9P fixes.
fs-cache series, DAX patches, Jan's file_remove_suid() work"
[ I'd say this is much more than "fixes and related cleanups". The
file_table locking rule change by Eric Dumazet is a rather big and
fundamental update even if the patch isn't huge. - Linus ]
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (49 commits)
9p: cope with bogus responses from server in p9_client_{read,write}
p9_client_write(): avoid double p9_free_req()
9p: forgetting to cancel request on interrupted zero-copy RPC
dax: bdev_direct_access() may sleep
block: Add support for DAX reads/writes to block devices
dax: Use copy_from_iter_nocache
dax: Add block size note to documentation
fs/file.c: __fget() and dup2() atomicity rules
fs/file.c: don't acquire files->file_lock in fd_install()
fs:super:get_anon_bdev: fix race condition could cause dev exceed its upper limitation
vfs: avoid creation of inode number 0 in get_next_ino
namei: make set_root_rcu() return void
make simple_positive() public
ufs: use dir_pages instead of ufs_dir_pages()
pagemap.h: move dir_pages() over there
remove the pointless include of lglock.h
fs: cleanup slight list_entry abuse
xfs: Correctly lock inode when removing suid and file capabilities
fs: Call security_ops->inode_killpriv on truncate
fs: Provide function telling whether file_remove_privs() will do anything
...
|
|
This allows detecting improper format string at build time, like:
fs/coredump.c:225:5: warning: format '%ld' expects argument of type 'long int', but argument 3 has type 'int' [-Wformat=]
err = cn_printf(cn, "%ld", cprm->siginfo->si_signo);
^
As si_signo is always an int, the format should be %d here.
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When adding __printf attribute to cn_printf, gcc reports some issues:
fs/coredump.c:213:5: warning: format '%d' expects argument of type
'int', but argument 3 has type 'kuid_t' [-Wformat=]
err = cn_printf(cn, "%d", cred->uid);
^
fs/coredump.c:217:5: warning: format '%d' expects argument of type
'int', but argument 3 has type 'kgid_t' [-Wformat=]
err = cn_printf(cn, "%d", cred->gid);
^
These warnings come from the fact that the value of uid/gid needs to be
extracted from the kuid_t/kgid_t structure before being used as an
integer. More precisely, cred->uid and cred->gid need to be converted to
either user-namespace uid/gid or to init_user_ns uid/gid.
Use init_user_ns in order not to break existing ABI, and document this in
Documentation/sysctl/kernel.txt.
While at it, format uid and gid values with %u instead of %d because
uid_t/__kernel_uid32_t and gid_t/__kernel_gid32_t are unsigned int.
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Turn
d_path(&file->f_path, ...);
into
file_path(file, ...);
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
format_corename() can only pass the leader's pid to the core handler,
but there is no simple way to figure out which thread originated the
coredump.
As Jan explains, this also means that there is no simple way to create
the backtrace of the crashed process:
As programs are mostly compiled with implicit gcc -fomit-frame-pointer
one needs program's .eh_frame section (equivalently PT_GNU_EH_FRAME
segment) or .debug_frame section. .debug_frame usually is present only
in separate debug info files usually not even installed on the system.
While .eh_frame is a part of the executable/library (and it is even
always mapped for C++ exceptions unwinding) it no longer has to be
present anywhere on the disk as the program could be upgraded in the
meantime and the running instance has its executable file already
unlinked from disk.
One possibility is to echo 0x3f >/proc/*/coredump_filter and dump all
the file-backed memory including the executable's .eh_frame section.
But that can create huge core files, for example even due to mmapped
data files.
Other possibility would be to read .eh_frame from /proc/PID/mem at the
core_pattern handler time of the core dump. For the backtrace one needs
to read the register state first which can be done from core_pattern
handler:
ptrace(PTRACE_SEIZE, tid, 0, PTRACE_O_TRACEEXIT)
close(0); // close pipe fd to resume the sleeping dumper
waitpid(); // should report EXIT
PTRACE_GETREGS or other requests
The remaining problem is how to get the 'tid' value of the crashed
thread. It could be read from the first NT_PRSTATUS note of the core
file but that makes the core_pattern handler complicated.
Unfortunately %t is already used so this patch uses %i/%I.
Automatic Bug Reporting Tool (https://github.com/abrt/abrt/wiki/overview)
is experimenting with this. It is using the elfutils
(https://fedorahosted.org/elfutils/) unwinder for generating the
backtraces. Apart from not needing matching executables as mentioned
above, another advantage is that we can get the backtrace without saving
the core (which might be quite large) to disk.
[mmilata@redhat.com: final paragraph of changelog]
Signed-off-by: Jan Kratochvil <jan.kratochvil@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Jan Kratochvil <jan.kratochvil@redhat.com>
Cc: Mark Wielaard <mjw@redhat.com>
Cc: Martin Milata <mmilata@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 079148b919d0 ("coredump: factor out the setting of PF_DUMPCORE")
cleaned up the setting of PF_DUMPCORE by removing it from all the
linux_binfmt->core_dump() and moving it to zap_threads().But this ended
up clearing all the previously set flags. This causes issues during
core generation when tsk->flags is checked again (eg. for PF_USED_MATH
to dump floating point registers). Fix this.
Signed-off-by: Silesh C V <svellattu@mvista.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Mandeep Singh Baines <msb@chromium.org>
Cc: <stable@vger.kernel.org> [3.10+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
A va_list needs to be copied in case it needs to be used twice.
Thanks to Hugh for debugging this issue, leading to various panics.
Tested:
lpq84:~# echo "|/foobar12345 %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h" >/proc/sys/kernel/core_pattern
'produce_core' is simply : main() { *(int *)0 = 1;}
lpq84:~# ./produce_core
Segmentation fault (core dumped)
lpq84:~# dmesg | tail -1
[ 614.352947] Core dump to |/foobar12345 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 lpq84 (null) pipe failed
Notice the last argument was replaced by a NULL (we were lucky enough to
not crash, but do not try this on your production machine !)
After fix :
lpq83:~# echo "|/foobar12345 %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h %h" >/proc/sys/kernel/core_pattern
lpq83:~# ./produce_core
Segmentation fault
lpq83:~# dmesg | tail -1
[ 740.800441] Core dump to |/foobar12345 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 lpq83 pipe failed
Fixes: 5fe9d8ca21cc ("coredump: cn_vprintf() has no reason to call vsnprintf() twice")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Diagnosed-by: Hugh Dickins <hughd@google.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@vger.kernel.org # 3.11+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
1. Remove fs/coredump.h. It is not clear why do we need it,
it only declares __get_dumpable(), signal.c includes it
for no reason.
2. Now that get_dumpable() and __get_dumpable() are really
trivial make them inline in linux/sched.h.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Alex Kelly <alex.page.kelly@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Petr Matousek <pmatouse@redhat.com>
Cc: Vasily Kulikov <segoon@openwall.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
the caller has already done file_start_write()...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Mea culpa - original variant used 64-by-32-bit division,
which got caught very late. Getting rid of that wasn't
hard, but I'd managed to botch the calling conventions
in process ;-/
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
dump_skip to given alignment...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
... and deal with short writes properly - the output might be to pipe, after
all; as it is, e.g. no-MMU case of elf_fdpic coredump can write a whole lot
more than a page worth of data at one call.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
dump_write() analog, takes core_dump_params instead of file,
keeps track of the amount written in cprm->written and checks for
cprm->limit. Start using it in binfmt_elf.c...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Add a new %P variable to be used in core_pattern. This variable contains
the global PID (PID in the init namespace) as %p contains the PID in the
current namespace which isn't always what we want.
The main use for this is to make it easier to handle crashes that happened
within a container. With that new variables it's possible to have the
crashes dumped into the container or forwarded to the host with the right
PID (from the host's point of view).
Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>
Reported-by: Hans Feldt <hans.feldt@ericsson.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Andy Whitcroft <apw@canonical.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
"goto end" should not bypass the "Backward compatibility with
core_uses_pid" code, move this label up.
While at it,
- It is ugly to copy '|' into cn->corename and then inc
the pointer for argv_split().
Change format_corename() to increment pat_ptr instead.
- Remove the dead "if (*pat_ptr == 0)" in format_corename(),
we already checked it is not zero.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Colin Walters <walters@verbum.org>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Lennart Poettering <mzxreary@0pointer.de>
Cc: Lucas De Marchi <lucas.de.marchi@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Imho, "atomic_t call_count" is ugly and should die. It buys nothing and
in fact it can grow more than necessary, expand doesn't check if it was
already incremented by another task.
Kill it, and introduce "static int core_name_size" updated by
expand_corename(). This is obviously racy too but harmless, and
core_name_size never grows for no reason.
We do not bother to to calculate the "right" new size, we simply do
kmalloc(size_we_need) and use ksize() to rely on kmalloc_index's decision.
Finally change format_corename() to use expand_corename(), krealloc(NULL)
is fine.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Colin Walters <walters@verbum.org>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Lennart Poettering <mzxreary@0pointer.de>
Cc: Lucas De Marchi <lucas.de.marchi@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The usage of cn_escape() looks really annoying, imho this sequence needs a
wrapper. And it is buggy. If cn_printf() does expand_corename()
cn_escape() writes to the freed memory.
Introduce cn_esc_printf() which hopefully does this all right. It records
the index before cn_vprintf(), not "char *" which is no longer valid (in
general) after krealloc().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Colin Walters <walters@verbum.org>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Lennart Poettering <mzxreary@0pointer.de>
Cc: Lucas De Marchi <lucas.de.marchi@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
cn_vprintf() looks really overcomplicated and sub-optimal. We do not need
vsnprintf(NULL) to calculate the size we need, we can simply try to print
into the current buffer and expand/retry only if necessary.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Colin Walters <walters@verbum.org>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Lennart Poettering <mzxreary@0pointer.de>
Cc: Lucas De Marchi <lucas.de.marchi@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Turn cn_printf(...) into cn_vprintf(va_list args), reintroduce
cn_printf() as a trivial wrapper.
This simplifies the next change and cn_vprintf() will have more
callers.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Colin Walters <walters@verbum.org>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Lennart Poettering <mzxreary@0pointer.de>
Cc: Lucas De Marchi <lucas.de.marchi@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
do_coredump() assumes that format_corename() can only fail if
expand_corename() fails and frees cn->corename. This is not true, for
example cn_print_exe_file() can fail and in this case nobody frees
cn->corename.
Change do_coredump() to always do kfree(cn->corename) after it calls
format_corename() (NULL is fine), change expand_corename() to do nothing
if kmalloc() fails.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Colin Walters <walters@verbum.org>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Lennart Poettering <mzxreary@0pointer.de>
Cc: Lucas De Marchi <lucas.de.marchi@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull VFS updates from Al Viro,
Misc cleanups all over the place, mainly wrt /proc interfaces (switch
create_proc_entry to proc_create(), get rid of the deprecated
create_proc_read_entry() in favor of using proc_create_data() and
seq_file etc).
7kloc removed.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (204 commits)
don't bother with deferred freeing of fdtables
proc: Move non-public stuff from linux/proc_fs.h to fs/proc/internal.h
proc: Make the PROC_I() and PDE() macros internal to procfs
proc: Supply a function to remove a proc entry by PDE
take cgroup_open() and cpuset_open() to fs/proc/base.c
ppc: Clean up scanlog
ppc: Clean up rtas_flash driver somewhat
hostap: proc: Use remove_proc_subtree()
drm: proc: Use remove_proc_subtree()
drm: proc: Use minor->index to label things, not PDE->name
drm: Constify drm_proc_list[]
zoran: Don't print proc_dir_entry data in debug
reiserfs: Don't access the proc_dir_entry in r_open(), r_start() r_show()
proc: Supply an accessor for getting the data from a PDE's parent
airo: Use remove_proc_subtree()
rtl8192u: Don't need to save device proc dir PDE
rtl8187se: Use a dir under /proc/net/r8180/
proc: Add proc_mkdir_data()
proc: Move some bits from linux/proc_fs.h to linux/{of.h,signal.h,tty.h}
proc: Move PDE_NET() to fs/proc/proc_net.c
...
|
|
wait_for_dump_helpers() calls wake_up/kill_fasync from inside the
wait_event-like loop. This is not needed and in fact this is not
strictly correct, we can/should do this only once after we change
pipe->writers. We could even check if it becomes zero.
Change this code to use use wait_event_interruptible(), this can also
help to make this wait freezable.
With this patch we check pipe->readers without pipe_lock(), this is
fine. Once we see pipe->readers == 1 we know that the handler
decremented the counter, this is all we need.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Mandeep Singh Baines <msb@chromium.org>
Cc: Neil Horman <nhorman@redhat.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Cleanup. Every linux_binfmt->core_dump() sets PF_DUMPCORE, move this into
zap_threads() called by do_coredump().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Mandeep Singh Baines <msb@chromium.org>
Cc: Neil Horman <nhorman@redhat.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
By discussion with Mandeep.
Change dump_write(), dump_seek() and do_coredump() to check
signal_pending() and abort if it is true. dump_seek() does this only
before f_op->llseek(), otherwise it relies on dump_write().
We need this change to ensure that the coredump won't delay suspend, and
to ensure it reacts to SIGKILL "quickly enough", a core dump can take a
lot of time. In particular this can help oom-killer.
We add the new trivial helper, dump_interrupted() to add the comments and
to simplify the potential freezer changes. Perhaps it will have more
callers.
Ideally it should do try_to_freeze() but then we need the unpleasant
changes in dump_write() and wait_for_dump_helpers(). It is not trivial to
change dump_write() to restart if f_op->write() fails because of
freezing(). We need to handle the short writes, we need to clear
TIF_SIGPENDING (and we can't rely on recalc_sigpending() unless we change
it to check PF_DUMPCORE). And if the buggy f_op->write() sets
TIF_SIGPENDING we can not distinguish this case from the race with
freeze_task() + __thaw_task().
So we simply accept the fact that the freezer can truncate a core-dump but
at least you can reliably suspend. Hopefully we can tolerate this
unlikely case and the necessary complications doesn't worth a trouble.
But if we decide to make the coredumping freezable later we can do this on
top of this change.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Mandeep Singh Baines <msb@chromium.org>
Cc: Neil Horman <nhorman@redhat.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Now that the coredumping process can be SIGKILL'ed, the setting of
->group_exit_code in do_coredump() can race with complete_signal() and
SIGKILL or 0x80 can be "lost", or wait(status) can report status ==
SIGKILL | 0x80.
But the main problem is that it is not clear to me what should we do if
binfmt->core_dump() succeeds but SIGKILL was sent, that is why this patch
comes as a separate change.
This patch adds 0x80 if ->core_dump() succeeds and the process was not
killed. But perhaps we can (should?) re-set ->group_exit_code changed by
SIGKILL back to "siginfo->si_signo |= 0x80" in case when core_dumped == T.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Tested-by: Mandeep Singh Baines <msb@chromium.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Neil Horman <nhorman@redhat.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Roland McGrath <roland@hack.frob.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
prepare_signal() blesses SIGKILL sent to the dumping process but this
signal can be "lost" anyway. The problems is, complete_signal() sees
SIGNAL_GROUP_EXIT and skips the "kill them all" logic. And even if the
dumping process is single-threaded (so the target is always "correct"),
the group-wide SIGKILL is not recorded in task->pending and thus
__fatal_signal_pending() won't be true. A multi-threaded case has even
more problems.
And even ignoring all technical details, SIGNAL_GROUP_EXIT doesn't look
right to me. This coredumping process is not exiting yet, it can do a lot
of work dumping the core.
With this patch the dumping process doesn't have SIGNAL_GROUP_EXIT, we set
signal->group_exit_task instead. This makes signal_group_exit() true and
thus this should equally close the races with exit/exec/stop but allows to
kill the dumping thread reliably.
Notes:
- It is not clear what should we do with ->group_exit_code
if the dumper was killed, see the next change.
- we need more (hopefully straightforward) changes to ensure
that SIGKILL actually interrupts the coredump. Basically we
need to check __fatal_signal_pending() in dump_write() and
dump_seek().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Tested-by: Mandeep Singh Baines <msb@chromium.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Neil Horman <nhorman@redhat.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Roland McGrath <roland@hack.frob.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There are 2 well known and ancient problems with coredump/signals, and a
lot of related bug reports:
- do_coredump() clears TIF_SIGPENDING but of course this can't help
if, say, SIGCHLD comes after that.
In this case the coredump can fail unexpectedly. See for example
wait_for_dump_helper()->signal_pending() check but there are other
reasons.
- At the same time, dumping a huge core on the slow media can take a
lot of time/resources and there is no way to kill the coredumping
task reliably. In particular this is not oom_kill-friendly.
This patch tries to fix the 1st problem, and makes the preparation for the
next changes.
We add the new SIGNAL_GROUP_COREDUMP flag set by zap_threads() to indicate
that this process dumps the core. prepare_signal() checks this flag and
nacks any signal except SIGKILL.
Note that this check tries to be conservative, in the long term we should
probably treat the SIGNAL_GROUP_EXIT case equally but this needs more
discussion. See marc.info/?l=linux-kernel&m=120508897917439
Notes:
- recalc_sigpending() doesn't check SIGNAL_GROUP_COREDUMP.
The patch assumes that dump_write/etc paths should never
call it, but we can change it as well.
- There is another source of TIF_SIGPENDING, freezer. This
will be addressed separately.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Tested-by: Mandeep Singh Baines <msb@chromium.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Neil Horman <nhorman@redhat.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Roland McGrath <roland@hack.frob.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
These are the only users of call_usermodehelper_fns(). This function
suffers from not being able to determine if the cleanup is called. Even
if in this places the cleanup pointer is NULL, convert them to use the
separate call_usermodehelper_setup() + call_usermodehelper_exec()
functions so we can remove the _fns variant.
Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Tejun Heo <tj@kernel.org>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Tejun Heo <tj@kernel.org>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
simplify get_pipe_info(), while we are at it
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
The existing SUID_DUMP_* defines duplicate the newer SUID_DUMPABLE_*
defines introduced in 54b501992dd2 ("coredump: warn about unsafe
suid_dumpable / core_pattern combo"). Remove the new ones, and use the
prior values instead.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reported-by: Chen Gang <gang.chen@asianux.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alan Cox <alan@linux.intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: James Morris <james.l.morris@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
replace_fd() began with "eats a reference, tries to insert into
descriptor table" semantics; at some point I'd switched it to
much saner current behaviour ("try to insert into descriptor
table, grabbing a new reference if inserted; caller should do
fput() in any case"), but forgot to update the callers.
Mea culpa...
[Spotted by Pavel Roskin, who has really weird system with pipe-fed
coredumps as part of what he considers a normal boot ;-)]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
This is a preparatory patch for the introduction of NT_SIGINFO elf note.
With this patch we pass "siginfo_t *siginfo" instead of "int signr" to
do_coredump() and put it into coredump_params. It will be used by the
next patch. Most changes are simple s/signr/siginfo->si_signo/.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Cc: Amerigo Wang <amwang@redhat.com>
Cc: "Jonathan M. Foote" <jmfoote@cert.org>
Cc: Roland McGrath <roland@hack.frob.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Some coredump handlers want to create a core file in a way compatible with
standard behavior. Standard behavior with fs.suid_dumpable = 2 is to
create core file with uid=gid=0. However, there was no way for coredump
handler to know that the process being dumped was suid'ed.
This patch adds the new %d specifier for format_corename() which simply
reports __get_dumpable(mm->flags), this is compatible with
/proc/sys/fs/suid_dumpable we already have.
Addresses https://bugzilla.redhat.com/show_bug.cgi?id=787135
Developed during a discussion with Denys Vlasenko.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Alex Kelly <alex.page.kelly@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Cong Wang <amwang@redhat.com>
Cc: Jiri Moskovcak <jmoskovc@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Create a new header file, fs/coredump.h, which contains functions only
used by the new coredump.c. It also moves do_coredump to the
include/linux/coredump.h header file, for consistency.
Signed-off-by: Alex Kelly <alex.page.kelly@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This prepares for making core dump functionality optional.
The variable "suid_dumpable" and associated functions are left in fs/exec.c
because they're used elsewhere, such as in ptrace.
Signed-off-by: Alex Kelly <alex.page.kelly@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
