diff options
Diffstat (limited to 'tools/power/x86/turbostat/turbostat.8')
| -rw-r--r-- | tools/power/x86/turbostat/turbostat.8 | 18 |
1 files changed, 15 insertions, 3 deletions
diff --git a/tools/power/x86/turbostat/turbostat.8 b/tools/power/x86/turbostat/turbostat.8 index 8f08c3fd498d5..0d3672e5d9ed1 100644 --- a/tools/power/x86/turbostat/turbostat.8 +++ b/tools/power/x86/turbostat/turbostat.8 @@ -67,6 +67,10 @@ The column name "all" can be used to enable all disabled-by-default built-in cou .PP \fB--quiet\fP Do not decode and print the system configuration header information. .PP ++\fB--no-msr\fP Disable all the uses of the MSR driver. ++.PP ++\fB--no-perf\fP Disable all the uses of the perf API. ++.PP \fB--interval seconds\fP overrides the default 5.0 second measurement interval. .PP \fB--num_iterations num\fP number of the measurement iterations. @@ -125,9 +129,17 @@ The system configuration dump (if --quiet is not used) is followed by statistics .PP \fBPkgTmp\fP Degrees Celsius reported by the per-package Package Thermal Monitor. .PP -\fBGFX%rc6\fP The percentage of time the GPU is in the "render C6" state, rc6, during the measurement interval. From /sys/class/drm/card0/power/rc6_residency_ms. +\fBGFX%rc6\fP The percentage of time the GPU is in the "render C6" state, rc6, during the measurement interval. From /sys/class/drm/card0/power/rc6_residency_ms or /sys/class/drm/card0/gt/gt0/rc6_residency_ms or /sys/class/drm/card0/device/tile0/gtN/gtidle/idle_residency_ms depending on the graphics driver being used. .PP -\fBGFXMHz\fP Instantaneous snapshot of what sysfs presents at the end of the measurement interval. From /sys/class/graphics/fb0/device/drm/card0/gt_cur_freq_mhz. +\fBGFXMHz\fP Instantaneous snapshot of what sysfs presents at the end of the measurement interval. From /sys/class/graphics/fb0/device/drm/card0/gt_cur_freq_mhz or /sys/class/drm/card0/gt_cur_freq_mhz or /sys/class/drm/card0/gt/gt0/rps_cur_freq_mhz or /sys/class/drm/card0/device/tile0/gtN/freq0/cur_freq depending on the graphics driver being used. +.PP +\fBGFXAMHz\fP Instantaneous snapshot of what sysfs presents at the end of the measurement interval. From /sys/class/graphics/fb0/device/drm/card0/gt_act_freq_mhz or /sys/class/drm/card0/gt_act_freq_mhz or /sys/class/drm/card0/gt/gt0/rps_act_freq_mhz or /sys/class/drm/card0/device/tile0/gtN/freq0/act_freq depending on the graphics driver being used. +.PP +\fBSAM%mc6\fP The percentage of time the SA Media is in the "module C6" state, mc6, during the measurement interval. From /sys/class/drm/card0/gt/gt1/rc6_residency_ms or /sys/class/drm/card0/device/tile0/gtN/gtidle/idle_residency_ms depending on the graphics driver being used. +.PP +\fBSAMMHz\fP Instantaneous snapshot of what sysfs presents at the end of the measurement interval. From /sys/class/drm/card0/gt/gt1/rps_cur_freq_mhz or /sys/class/drm/card0/device/tile0/gtN/freq0/cur_freq depending on the graphics driver being used. +.PP +\fBSAMAMHz\fP Instantaneous snapshot of what sysfs presents at the end of the measurement interval. From /sys/class/drm/card0/gt/gt1/rps_act_freq_mhz or /sys/class/drm/card0/device/tile0/gtN/freq0/act_freq depending on the graphics driver being used. .PP \fBPkg%pc2, Pkg%pc3, Pkg%pc6, Pkg%pc7\fP percentage residency in hardware package idle states. These numbers are from hardware residency counters. .PP @@ -370,7 +382,7 @@ below the processor's base frequency. Busy% = MPERF_delta/TSC_delta -Bzy_MHz = TSC_delta/APERF_delta/MPERF_delta/measurement_interval +Bzy_MHz = TSC_delta*APERF_delta/MPERF_delta/measurement_interval Note that these calculations depend on TSC_delta, so they are not reliable during intervals when TSC_MHz is not running at the base frequency. |