diff options
Diffstat (limited to 'include/linux/ftape.h')
| -rw-r--r-- | include/linux/ftape.h | 201 |
1 files changed, 0 insertions, 201 deletions
diff --git a/include/linux/ftape.h b/include/linux/ftape.h deleted file mode 100644 index 7e7038cba86a88..00000000000000 --- a/include/linux/ftape.h +++ /dev/null @@ -1,201 +0,0 @@ -#ifndef _FTAPE_H -#define _FTAPE_H - -/* - * Copyright (C) 1994-1996 Bas Laarhoven, - * (C) 1996-1997 Claus-Justus Heine. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; see the file COPYING. If not, write to - the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - - * - * $Source: /homes/cvs/ftape-stacked/include/linux/ftape.h,v $ - * $Revision: 1.17.6.4 $ - * $Date: 1997/11/25 01:52:54 $ - * - * This file contains global definitions, typedefs and macro's - * for the QIC-40/80/3010/3020 floppy-tape driver for Linux. - */ - -#define FTAPE_VERSION "ftape v3.04d 25/11/97" - -#ifdef __KERNEL__ -#include <linux/interrupt.h> -#include <linux/mm.h> -#endif -#include <linux/types.h> -#include <linux/mtio.h> - -#define FT_SECTOR(x) (x+1) /* sector offset into real sector */ -#define FT_SECTOR_SIZE 1024 -#define FT_SECTORS_PER_SEGMENT 32 -#define FT_ECC_SECTORS 3 -#define FT_SEGMENT_SIZE ((FT_SECTORS_PER_SEGMENT - FT_ECC_SECTORS) * FT_SECTOR_SIZE) -#define FT_BUFF_SIZE (FT_SECTORS_PER_SEGMENT * FT_SECTOR_SIZE) - -/* - * bits of the minor device number that define drive selection - * methods. Could be used one day to access multiple tape - * drives on the same controller. - */ -#define FTAPE_SEL_A 0 -#define FTAPE_SEL_B 1 -#define FTAPE_SEL_C 2 -#define FTAPE_SEL_D 3 -#define FTAPE_SEL_MASK 3 -#define FTAPE_SEL(unit) ((unit) & FTAPE_SEL_MASK) -#define FTAPE_NO_REWIND 4 /* mask for minor nr */ - -/* the following two may be reported when MTIOCGET is requested ... */ -typedef union { - struct { - __u8 error; - __u8 command; - } error; - long space; -} ft_drive_error; -typedef union { - struct { - __u8 drive_status; - __u8 drive_config; - __u8 tape_status; - } status; - long space; -} ft_drive_status; - -#ifdef __KERNEL__ - -#define FT_RQM_DELAY 12 -#define FT_MILLISECOND 1 -#define FT_SECOND 1000 -#define FT_FOREVER -1 -#ifndef HZ -#error "HZ undefined." -#endif -#define FT_USPT (1000000/HZ) /* microseconds per tick */ - -/* This defines the number of retries that the driver will allow - * before giving up (and letting a higher level handle the error). - */ -#ifdef TESTING -#define FT_SOFT_RETRIES 1 /* number of low level retries */ -#define FT_RETRIES_ON_ECC_ERROR 3 /* ecc error when correcting segment */ -#else -#define FT_SOFT_RETRIES 6 /* number of low level retries (triple) */ -#define FT_RETRIES_ON_ECC_ERROR 3 /* ecc error when correcting segment */ -#endif - -#ifndef THE_FTAPE_MAINTAINER -#define THE_FTAPE_MAINTAINER "the ftape maintainer" -#endif - -/* Initialize missing configuration parameters. - */ -#ifndef CONFIG_FT_NR_BUFFERS -# define CONFIG_FT_NR_BUFFERS 3 -#endif -#ifndef CONFIG_FT_FDC_THR -# define CONFIG_FT_FDC_THR 8 -#endif -#ifndef CONFIG_FT_FDC_MAX_RATE -# define CONFIG_FT_FDC_MAX_RATE 2000 -#endif -#ifndef CONFIG_FT_FDC_BASE -# define CONFIG_FT_FDC_BASE 0 -#endif -#ifndef CONFIG_FT_FDC_IRQ -# define CONFIG_FT_FDC_IRQ 0 -#endif -#ifndef CONFIG_FT_FDC_DMA -# define CONFIG_FT_FDC_DMA 0 -#endif - -/* Turn some booleans into numbers. - */ -#ifdef CONFIG_FT_PROBE_FC10 -# undef CONFIG_FT_PROBE_FC10 -# define CONFIG_FT_PROBE_FC10 1 -#else -# define CONFIG_FT_PROBE_FC10 0 -#endif -#ifdef CONFIG_FT_MACH2 -# undef CONFIG_FT_MACH2 -# define CONFIG_FT_MACH2 1 -#else -# define CONFIG_FT_MACH2 0 -#endif - -/* Insert default settings - */ -#if CONFIG_FT_PROBE_FC10 == 1 -# if CONFIG_FT_FDC_BASE == 0 -# undef CONFIG_FT_FDC_BASE -# define CONFIG_FT_FDC_BASE 0x180 -# endif -# if CONFIG_FT_FDC_IRQ == 0 -# undef CONFIG_FT_FDC_IRQ -# define CONFIG_FT_FDC_IRQ 9 -# endif -# if CONFIG_FT_FDC_DMA == 0 -# undef CONFIG_FT_FDC_DMA -# define CONFIG_FT_FDC_DMA 3 -# endif -#elif CONFIG_FT_MACH2 == 1 /* CONFIG_FT_PROBE_FC10 == 1 */ -# if CONFIG_FT_FDC_BASE == 0 -# undef CONFIG_FT_FDC_BASE -# define CONFIG_FT_FDC_BASE 0x1E0 -# endif -# if CONFIG_FT_FDC_IRQ == 0 -# undef CONFIG_FT_FDC_IRQ -# define CONFIG_FT_FDC_IRQ 6 -# endif -# if CONFIG_FT_FDC_DMA == 0 -# undef CONFIG_FT_FDC_DMA -# define CONFIG_FT_FDC_DMA 2 -# endif -#elif defined(CONFIG_FT_ALT_FDC) /* CONFIG_FT_MACH2 */ -# if CONFIG_FT_FDC_BASE == 0 -# undef CONFIG_FT_FDC_BASE -# define CONFIG_FT_FDC_BASE 0x370 -# endif -# if CONFIG_FT_FDC_IRQ == 0 -# undef CONFIG_FT_FDC_IRQ -# define CONFIG_FT_FDC_IRQ 6 -# endif -# if CONFIG_FT_FDC_DMA == 0 -# undef CONFIG_FT_FDC_DMA -# define CONFIG_FT_FDC_DMA 2 -# endif -#else /* CONFIG_FT_ALT_FDC */ -# if CONFIG_FT_FDC_BASE == 0 -# undef CONFIG_FT_FDC_BASE -# define CONFIG_FT_FDC_BASE 0x3f0 -# endif -# if CONFIG_FT_FDC_IRQ == 0 -# undef CONFIG_FT_FDC_IRQ -# define CONFIG_FT_FDC_IRQ 6 -# endif -# if CONFIG_FT_FDC_DMA == 0 -# undef CONFIG_FT_FDC_DMA -# define CONFIG_FT_FDC_DMA 2 -# endif -#endif /* standard FDC */ - -/* some useful macro's - */ -#define NR_ITEMS(x) (int)(sizeof(x)/ sizeof(*x)) - -#endif /* __KERNEL__ */ - -#endif |