diff options
Diffstat (limited to 'include/asm-mips/mach-au1x00')
| -rw-r--r-- | include/asm-mips/mach-au1x00/au1000.h | 556 | ||||
| -rw-r--r-- | include/asm-mips/mach-au1x00/au1xxx_dbdma.h | 124 |
2 files changed, 604 insertions, 76 deletions
diff --git a/include/asm-mips/mach-au1x00/au1000.h b/include/asm-mips/mach-au1x00/au1000.h index 148bae2fa7d32..28b04a5f67cf6 100644 --- a/include/asm-mips/mach-au1x00/au1000.h +++ b/include/asm-mips/mach-au1x00/au1000.h @@ -162,27 +162,355 @@ extern au1xxx_irq_map_t au1xxx_irq_map[]; #define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5) #endif -/* SDRAM Controller */ +/* + * SDRAM Register Offsets + */ #if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1100) -#define MEM_SDMODE0 0xB4000000 -#define MEM_SDMODE1 0xB4000004 -#define MEM_SDMODE2 0xB4000008 +#define MEM_SDMODE0 (0x0000) +#define MEM_SDMODE1 (0x0004) +#define MEM_SDMODE2 (0x0008) +#define MEM_SDADDR0 (0x000C) +#define MEM_SDADDR1 (0x0010) +#define MEM_SDADDR2 (0x0014) +#define MEM_SDREFCFG (0x0018) +#define MEM_SDPRECMD (0x001C) +#define MEM_SDAUTOREF (0x0020) +#define MEM_SDWRMD0 (0x0024) +#define MEM_SDWRMD1 (0x0028) +#define MEM_SDWRMD2 (0x002C) +#define MEM_SDSLEEP (0x0030) +#define MEM_SDSMCKE (0x0034) + +#ifndef ASSEMBLER +/*typedef volatile struct +{ + uint32 sdmode0; + uint32 sdmode1; + uint32 sdmode2; + uint32 sdaddr0; + uint32 sdaddr1; + uint32 sdaddr2; + uint32 sdrefcfg; + uint32 sdautoref; + uint32 sdwrmd0; + uint32 sdwrmd1; + uint32 sdwrmd2; + uint32 sdsleep; + uint32 sdsmcke; + +} AU1X00_SDRAM;*/ +#endif + +/* + * MEM_SDMODE register content definitions + */ +#define MEM_SDMODE_F (1<<22) +#define MEM_SDMODE_SR (1<<21) +#define MEM_SDMODE_BS (1<<20) +#define MEM_SDMODE_RS (3<<18) +#define MEM_SDMODE_CS (7<<15) +#define MEM_SDMODE_TRAS (15<<11) +#define MEM_SDMODE_TMRD (3<<9) +#define MEM_SDMODE_TWR (3<<7) +#define MEM_SDMODE_TRP (3<<5) +#define MEM_SDMODE_TRCD (3<<3) +#define MEM_SDMODE_TCL (7<<0) + +#define MEM_SDMODE_BS_2Bank (0<<20) +#define MEM_SDMODE_BS_4Bank (1<<20) +#define MEM_SDMODE_RS_11Row (0<<18) +#define MEM_SDMODE_RS_12Row (1<<18) +#define MEM_SDMODE_RS_13Row (2<<18) +#define MEM_SDMODE_RS_N(N) ((N)<<18) +#define MEM_SDMODE_CS_7Col (0<<15) +#define MEM_SDMODE_CS_8Col (1<<15) +#define MEM_SDMODE_CS_9Col (2<<15) +#define MEM_SDMODE_CS_10Col (3<<15) +#define MEM_SDMODE_CS_11Col (4<<15) +#define MEM_SDMODE_CS_N(N) ((N)<<15) +#define MEM_SDMODE_TRAS_N(N) ((N)<<11) +#define MEM_SDMODE_TMRD_N(N) ((N)<<9) +#define MEM_SDMODE_TWR_N(N) ((N)<<7) +#define MEM_SDMODE_TRP_N(N) ((N)<<5) +#define MEM_SDMODE_TRCD_N(N) ((N)<<3) +#define MEM_SDMODE_TCL_N(N) ((N)<<0) + +/* + * MEM_SDADDR register contents definitions + */ +#define MEM_SDADDR_E (1<<20) +#define MEM_SDADDR_CSBA (0x03FF<<10) +#define MEM_SDADDR_CSMASK (0x03FF<<0) +#define MEM_SDADDR_CSBA_N(N) ((N)&(0x03FF<<22)>>12) +#define MEM_SDADDR_CSMASK_N(N) ((N)&(0x03FF<<22)>>22) + +/* + * MEM_SDREFCFG register content definitions + */ +#define MEM_SDREFCFG_TRC (15<<28) +#define MEM_SDREFCFG_TRPM (3<<26) +#define MEM_SDREFCFG_E (1<<25) +#define MEM_SDREFCFG_RE (0x1ffffff<<0) +#define MEM_SDREFCFG_TRC_N(N) ((N)<<MEM_SDREFCFG_TRC) +#define MEM_SDREFCFG_TRPM_N(N) ((N)<<MEM_SDREFCFG_TRPM) +#define MEM_SDREFCFG_REF_N(N) (N) +#endif -#define MEM_SDADDR0 0xB400000C -#define MEM_SDADDR1 0xB4000010 -#define MEM_SDADDR2 0xB4000014 +/***********************************************************************/ -#define MEM_SDREFCFG 0xB4000018 -#define MEM_SDPRECMD 0xB400001C -#define MEM_SDAUTOREF 0xB4000020 +/* + * Au1550 SDRAM Register Offsets + */ -#define MEM_SDWRMD0 0xB4000024 -#define MEM_SDWRMD1 0xB4000028 -#define MEM_SDWRMD2 0xB400002C +/***********************************************************************/ -#define MEM_SDSLEEP 0xB4000030 -#define MEM_SDSMCKE 0xB4000034 +#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) +#define MEM_SDMODE0 (0x0800) +#define MEM_SDMODE1 (0x0808) +#define MEM_SDMODE2 (0x0810) +#define MEM_SDADDR0 (0x0820) +#define MEM_SDADDR1 (0x0828) +#define MEM_SDADDR2 (0x0830) +#define MEM_SDCONFIGA (0x0840) +#define MEM_SDCONFIGB (0x0848) +#define MEM_SDSTAT (0x0850) +#define MEM_SDERRADDR (0x0858) +#define MEM_SDSTRIDE0 (0x0860) +#define MEM_SDSTRIDE1 (0x0868) +#define MEM_SDSTRIDE2 (0x0870) +#define MEM_SDWRMD0 (0x0880) +#define MEM_SDWRMD1 (0x0888) +#define MEM_SDWRMD2 (0x0890) +#define MEM_SDPRECMD (0x08C0) +#define MEM_SDAUTOREF (0x08C8) +#define MEM_SDSREF (0x08D0) +#define MEM_SDSLEEP MEM_SDSREF + +#ifndef ASSEMBLER +/*typedef volatile struct +{ + uint32 sdmode0; + uint32 reserved0; + uint32 sdmode1; + uint32 reserved1; + uint32 sdmode2; + uint32 reserved2[3]; + uint32 sdaddr0; + uint32 reserved3; + uint32 sdaddr1; + uint32 reserved4; + uint32 sdaddr2; + uint32 reserved5[3]; + uint32 sdconfiga; + uint32 reserved6; + uint32 sdconfigb; + uint32 reserved7; + uint32 sdstat; + uint32 reserved8; + uint32 sderraddr; + uint32 reserved9; + uint32 sdstride0; + uint32 reserved10; + uint32 sdstride1; + uint32 reserved11; + uint32 sdstride2; + uint32 reserved12[3]; + uint32 sdwrmd0; + uint32 reserved13; + uint32 sdwrmd1; + uint32 reserved14; + uint32 sdwrmd2; + uint32 reserved15[11]; + uint32 sdprecmd; + uint32 reserved16; + uint32 sdautoref; + uint32 reserved17; + uint32 sdsref; + +} AU1550_SDRAM;*/ #endif +#endif + +/* + * Physical base addresses for integrated peripherals + */ + +#ifdef CONFIG_SOC_AU1000 +#define MEM_PHYS_ADDR 0x14000000 +#define STATIC_MEM_PHYS_ADDR 0x14001000 +#define DMA0_PHYS_ADDR 0x14002000 +#define DMA1_PHYS_ADDR 0x14002100 +#define DMA2_PHYS_ADDR 0x14002200 +#define DMA3_PHYS_ADDR 0x14002300 +#define DMA4_PHYS_ADDR 0x14002400 +#define DMA5_PHYS_ADDR 0x14002500 +#define DMA6_PHYS_ADDR 0x14002600 +#define DMA7_PHYS_ADDR 0x14002700 +#define IC0_PHYS_ADDR 0x10400000 +#define IC1_PHYS_ADDR 0x11800000 +#define AC97_PHYS_ADDR 0x10000000 +#define USBH_PHYS_ADDR 0x10100000 +#define USBD_PHYS_ADDR 0x10200000 +#define IRDA_PHYS_ADDR 0x10300000 +#define MAC0_PHYS_ADDR 0x10500000 +#define MAC1_PHYS_ADDR 0x10510000 +#define MACEN_PHYS_ADDR 0x10520000 +#define MACDMA0_PHYS_ADDR 0x14004000 +#define MACDMA1_PHYS_ADDR 0x14004200 +#define I2S_PHYS_ADDR 0x11000000 +#define UART0_PHYS_ADDR 0x11100000 +#define UART1_PHYS_ADDR 0x11200000 +#define UART2_PHYS_ADDR 0x11300000 +#define UART3_PHYS_ADDR 0x11400000 +#define SSI0_PHYS_ADDR 0x11600000 +#define SSI1_PHYS_ADDR 0x11680000 +#define SYS_PHYS_ADDR 0x11900000 +#define PCMCIA_IO_PHYS_ADDR 0xF00000000 +#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000 +#define PCMCIA_MEM_PHYS_ADDR 0xF80000000 +#endif + +/********************************************************************/ + +#ifdef CONFIG_SOC_AU1500 +#define MEM_PHYS_ADDR 0x14000000 +#define STATIC_MEM_PHYS_ADDR 0x14001000 +#define DMA0_PHYS_ADDR 0x14002000 +#define DMA1_PHYS_ADDR 0x14002100 +#define DMA2_PHYS_ADDR 0x14002200 +#define DMA3_PHYS_ADDR 0x14002300 +#define DMA4_PHYS_ADDR 0x14002400 +#define DMA5_PHYS_ADDR 0x14002500 +#define DMA6_PHYS_ADDR 0x14002600 +#define DMA7_PHYS_ADDR 0x14002700 +#define IC0_PHYS_ADDR 0x10400000 +#define IC1_PHYS_ADDR 0x11800000 +#define AC97_PHYS_ADDR 0x10000000 +#define USBH_PHYS_ADDR 0x10100000 +#define USBD_PHYS_ADDR 0x10200000 +#define PCI_PHYS_ADDR 0x14005000 +#define MAC0_PHYS_ADDR 0x11500000 +#define MAC1_PHYS_ADDR 0x11510000 +#define MACEN_PHYS_ADDR 0x11520000 +#define MACDMA0_PHYS_ADDR 0x14004000 +#define MACDMA1_PHYS_ADDR 0x14004200 +#define I2S_PHYS_ADDR 0x11000000 +#define UART0_PHYS_ADDR 0x11100000 +#define UART3_PHYS_ADDR 0x11400000 +#define GPIO2_PHYS_ADDR 0x11700000 +#define SYS_PHYS_ADDR 0x11900000 +#define PCI_MEM_PHYS_ADDR 0x400000000 +#define PCI_IO_PHYS_ADDR 0x500000000 +#define PCI_CONFIG0_PHYS_ADDR 0x600000000 +#define PCI_CONFIG1_PHYS_ADDR 0x680000000 +#define PCMCIA_IO_PHYS_ADDR 0xF00000000 +#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000 +#define PCMCIA_MEM_PHYS_ADDR 0xF80000000 +#endif + +/********************************************************************/ + +#ifdef CONFIG_SOC_AU1100 +#define MEM_PHYS_ADDR 0x14000000 +#define STATIC_MEM_PHYS_ADDR 0x14001000 +#define DMA0_PHYS_ADDR 0x14002000 +#define DMA1_PHYS_ADDR 0x14002100 +#define DMA2_PHYS_ADDR 0x14002200 +#define DMA3_PHYS_ADDR 0x14002300 +#define DMA4_PHYS_ADDR 0x14002400 +#define DMA5_PHYS_ADDR 0x14002500 +#define DMA6_PHYS_ADDR 0x14002600 +#define DMA7_PHYS_ADDR 0x14002700 +#define IC0_PHYS_ADDR 0x10400000 +#define SD0_PHYS_ADDR 0x10600000 +#define SD1_PHYS_ADDR 0x10680000 +#define IC1_PHYS_ADDR 0x11800000 +#define AC97_PHYS_ADDR 0x10000000 +#define USBH_PHYS_ADDR 0x10100000 +#define USBD_PHYS_ADDR 0x10200000 +#define IRDA_PHYS_ADDR 0x10300000 +#define MAC0_PHYS_ADDR 0x10500000 +#define MACEN_PHYS_ADDR 0x10520000 +#define MACDMA0_PHYS_ADDR 0x14004000 +#define MACDMA1_PHYS_ADDR 0x14004200 +#define I2S_PHYS_ADDR 0x11000000 +#define UART0_PHYS_ADDR 0x11100000 +#define UART1_PHYS_ADDR 0x11200000 +#define UART3_PHYS_ADDR 0x11400000 +#define SSI0_PHYS_ADDR 0x11600000 +#define SSI1_PHYS_ADDR 0x11680000 +#define GPIO2_PHYS_ADDR 0x11700000 +#define SYS_PHYS_ADDR 0x11900000 +#define LCD_PHYS_ADDR 0x15000000 +#define PCMCIA_IO_PHYS_ADDR 0xF00000000 +#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000 +#define PCMCIA_MEM_PHYS_ADDR 0xF80000000 +#endif + +/***********************************************************************/ + +#ifdef CONFIG_SOC_AU1550 +#define MEM_PHYS_ADDR 0x14000000 +#define STATIC_MEM_PHYS_ADDR 0x14001000 +#define IC0_PHYS_ADDR 0x10400000 +#define IC1_PHYS_ADDR 0x11800000 +#define USBH_PHYS_ADDR 0x14020000 +#define USBD_PHYS_ADDR 0x10200000 +#define PCI_PHYS_ADDR 0x14005000 +#define MAC0_PHYS_ADDR 0x10500000 +#define MAC1_PHYS_ADDR 0x10510000 +#define MACEN_PHYS_ADDR 0x10520000 +#define MACDMA0_PHYS_ADDR 0x14004000 +#define MACDMA1_PHYS_ADDR 0x14004200 +#define UART0_PHYS_ADDR 0x11100000 +#define UART1_PHYS_ADDR 0x11200000 +#define UART3_PHYS_ADDR 0x11400000 +#define GPIO2_PHYS_ADDR 0x11700000 +#define SYS_PHYS_ADDR 0x11900000 +#define DDMA_PHYS_ADDR 0x14002000 +#define PE_PHYS_ADDR 0x14008000 +#define PSC0_PHYS_ADDR 0x11A00000 +#define PSC1_PHYS_ADDR 0x11B00000 +#define PSC2_PHYS_ADDR 0x10A00000 +#define PSC3_PHYS_ADDR 0x10B00000 +#define PCI_MEM_PHYS_ADDR 0x400000000 +#define PCI_IO_PHYS_ADDR 0x500000000 +#define PCI_CONFIG0_PHYS_ADDR 0x600000000 +#define PCI_CONFIG1_PHYS_ADDR 0x680000000 +#define PCMCIA_IO_PHYS_ADDR 0xF00000000 +#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000 +#define PCMCIA_MEM_PHYS_ADDR 0xF80000000 +#endif + +/***********************************************************************/ + +#ifdef CONFIG_SOC_AU1200 +#define MEM_PHYS_ADDR 0x14000000 +#define STATIC_MEM_PHYS_ADDR 0x14001000 +#define AES_PHYS_ADDR 0x10300000 +#define CIM_PHYS_ADDR 0x14004000 +#define IC0_PHYS_ADDR 0x10400000 +#define IC1_PHYS_ADDR 0x11800000 +#define USBM_PHYS_ADDR 0x14020000 +#define USBH_PHYS_ADDR 0x14020100 +#define UART0_PHYS_ADDR 0x11100000 +#define UART1_PHYS_ADDR 0x11200000 +#define GPIO2_PHYS_ADDR 0x11700000 +#define SYS_PHYS_ADDR 0x11900000 +#define DDMA_PHYS_ADDR 0x14002000 +#define PSC0_PHYS_ADDR 0x11A00000 +#define PSC1_PHYS_ADDR 0x11B00000 +#define PCMCIA_IO_PHYS_ADDR 0xF00000000 +#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000 +#define PCMCIA_MEM_PHYS_ADDR 0xF80000000 +#define SD0_PHYS_ADDR 0x10600000 +#define SD1_PHYS_ADDR 0x10680000 +#define LCD_PHYS_ADDR 0x15000000 +#define SWCNT_PHYS_ADDR 0x1110010C +#define MAEFE_PHYS_ADDR 0x14012000 +#define MAEBE_PHYS_ADDR 0x14010000 +#endif + /* Static Bus Controller */ #define MEM_STCFG0 0xB4001000 @@ -369,7 +697,7 @@ extern au1xxx_irq_map_t au1xxx_irq_map[]; #define AU1000_MAC0_ENABLE 0xB0520000 #define AU1000_MAC1_ENABLE 0xB0520004 #define NUM_ETH_INTERFACES 2 -#endif // CONFIG_SOC_AU1000 +#endif /* CONFIG_SOC_AU1000 */ /* Au1500 */ #ifdef CONFIG_SOC_AU1500 @@ -440,7 +768,7 @@ extern au1xxx_irq_map_t au1xxx_irq_map[]; #define AU1500_MAC0_ENABLE 0xB1520000 #define AU1500_MAC1_ENABLE 0xB1520004 #define NUM_ETH_INTERFACES 2 -#endif // CONFIG_SOC_AU1500 +#endif /* CONFIG_SOC_AU1500 */ /* Au1100 */ #ifdef CONFIG_SOC_AU1100 @@ -485,6 +813,22 @@ extern au1xxx_irq_map_t au1xxx_irq_map[]; #define AU1000_GPIO_13 45 #define AU1000_GPIO_14 46 #define AU1000_GPIO_15 47 +#define AU1000_GPIO_16 48 +#define AU1000_GPIO_17 49 +#define AU1000_GPIO_18 50 +#define AU1000_GPIO_19 51 +#define AU1000_GPIO_20 52 +#define AU1000_GPIO_21 53 +#define AU1000_GPIO_22 54 +#define AU1000_GPIO_23 55 +#define AU1000_GPIO_24 56 +#define AU1000_GPIO_25 57 +#define AU1000_GPIO_26 58 +#define AU1000_GPIO_27 59 +#define AU1000_GPIO_28 60 +#define AU1000_GPIO_29 61 +#define AU1000_GPIO_30 62 +#define AU1000_GPIO_31 63 #define UART0_ADDR 0xB1100000 #define UART1_ADDR 0xB1200000 @@ -496,7 +840,7 @@ extern au1xxx_irq_map_t au1xxx_irq_map[]; #define AU1100_ETH0_BASE 0xB0500000 #define AU1100_MAC0_ENABLE 0xB0520000 #define NUM_ETH_INTERFACES 1 -#endif // CONFIG_SOC_AU1100 +#endif /* CONFIG_SOC_AU1100 */ #ifdef CONFIG_SOC_AU1550 #define AU1550_UART0_INT 0 @@ -513,14 +857,14 @@ extern au1xxx_irq_map_t au1xxx_irq_map[]; #define AU1550_PSC1_INT 11 #define AU1550_PSC2_INT 12 #define AU1550_PSC3_INT 13 -#define AU1550_TOY_INT 14 -#define AU1550_TOY_MATCH0_INT 15 -#define AU1550_TOY_MATCH1_INT 16 -#define AU1550_TOY_MATCH2_INT 17 -#define AU1550_RTC_INT 18 -#define AU1550_RTC_MATCH0_INT 19 -#define AU1550_RTC_MATCH1_INT 20 -#define AU1550_RTC_MATCH2_INT 21 +#define AU1000_TOY_INT 14 +#define AU1000_TOY_MATCH0_INT 15 +#define AU1000_TOY_MATCH1_INT 16 +#define AU1000_TOY_MATCH2_INT 17 +#define AU1000_RTC_INT 18 +#define AU1000_RTC_MATCH0_INT 19 +#define AU1000_RTC_MATCH1_INT 20 +#define AU1000_RTC_MATCH2_INT 21 #define AU1550_NAND_INT 23 #define AU1550_USB_DEV_REQ_INT 24 #define AU1550_USB_DEV_SUS_INT 25 @@ -575,7 +919,7 @@ extern au1xxx_irq_map_t au1xxx_irq_map[]; #define AU1550_MAC0_ENABLE 0xB0520000 #define AU1550_MAC1_ENABLE 0xB0520004 #define NUM_ETH_INTERFACES 2 -#endif // CONFIG_SOC_AU1550 +#endif /* CONFIG_SOC_AU1550 */ #ifdef CONFIG_SOC_AU1200 #define AU1200_UART0_INT 0 @@ -592,14 +936,14 @@ extern au1xxx_irq_map_t au1xxx_irq_map[]; #define AU1200_PSC1_INT 11 #define AU1200_AES_INT 12 #define AU1200_CAMERA_INT 13 -#define AU1200_TOY_INT 14 -#define AU1200_TOY_MATCH0_INT 15 -#define AU1200_TOY_MATCH1_INT 16 -#define AU1200_TOY_MATCH2_INT 17 -#define AU1200_RTC_INT 18 -#define AU1200_RTC_MATCH0_INT 19 -#define AU1200_RTC_MATCH1_INT 20 -#define AU1200_RTC_MATCH2_INT 21 +#define AU1000_TOY_INT 14 +#define AU1000_TOY_MATCH0_INT 15 +#define AU1000_TOY_MATCH1_INT 16 +#define AU1000_TOY_MATCH2_INT 17 +#define AU1000_RTC_INT 18 +#define AU1000_RTC_MATCH0_INT 19 +#define AU1000_RTC_MATCH1_INT 20 +#define AU1000_RTC_MATCH2_INT 21 #define AU1200_NAND_INT 23 #define AU1200_GPIO_204 24 #define AU1200_GPIO_205 25 @@ -607,6 +951,7 @@ extern au1xxx_irq_map_t au1xxx_irq_map[]; #define AU1200_GPIO_207 27 #define AU1200_GPIO_208_215 28 // Logical OR of 208:215 #define AU1200_USB_INT 29 +#define AU1000_USB_HOST_INT AU1200_USB_INT #define AU1200_LCD_INT 30 #define AU1200_MAE_BOTH_INT 31 #define AU1000_GPIO_0 32 @@ -645,21 +990,36 @@ extern au1xxx_irq_map_t au1xxx_irq_map[]; #define UART0_ADDR 0xB1100000 #define UART1_ADDR 0xB1200000 -#define USB_OHCI_BASE 0x14020000 // phys addr for ioremap -#define USB_HOST_CONFIG 0xB4027ffc - -// these are here for prototyping on au1550 (do not exist on au1200) -#define AU1200_ETH0_BASE 0xB0500000 -#define AU1200_ETH1_BASE 0xB0510000 -#define AU1200_MAC0_ENABLE 0xB0520000 -#define AU1200_MAC1_ENABLE 0xB0520004 -#define NUM_ETH_INTERFACES 2 -#endif // CONFIG_SOC_AU1200 +#define USB_UOC_BASE 0x14020020 +#define USB_UOC_LEN 0x20 +#define USB_OHCI_BASE 0x14020100 +#define USB_OHCI_LEN 0x100 +#define USB_EHCI_BASE 0x14020200 +#define USB_EHCI_LEN 0x100 +#define USB_UDC_BASE 0x14022000 +#define USB_UDC_LEN 0x2000 +#define USB_MSR_BASE 0xB4020000 +#define USB_MSR_MCFG 4 +#define USBMSRMCFG_OMEMEN 0 +#define USBMSRMCFG_OBMEN 1 +#define USBMSRMCFG_EMEMEN 2 +#define USBMSRMCFG_EBMEN 3 +#define USBMSRMCFG_DMEMEN 4 +#define USBMSRMCFG_DBMEN 5 +#define USBMSRMCFG_GMEMEN 6 +#define USBMSRMCFG_OHCCLKEN 16 +#define USBMSRMCFG_EHCCLKEN 17 +#define USBMSRMCFG_UDCCLKEN 18 +#define USBMSRMCFG_PHYPLLEN 19 +#define USBMSRMCFG_RDCOMB 30 +#define USBMSRMCFG_PFEN 31 + +#endif /* CONFIG_SOC_AU1200 */ #define AU1000_LAST_INTC0_INT 31 +#define AU1000_LAST_INTC1_INT 63 #define AU1000_MAX_INTR 63 - /* Programmable Counters 0 and 1 */ #define SYS_BASE 0xB1900000 #define SYS_COUNTER_CNTRL (SYS_BASE + 0x14) @@ -730,6 +1090,8 @@ extern au1xxx_irq_map_t au1xxx_irq_map[]; #define I2S_CONTROL_D (1<<1) #define I2S_CONTROL_CE (1<<0) +#ifndef CONFIG_SOC_AU1200 + /* USB Host Controller */ #define USB_OHCI_LEN 0x00100000 @@ -775,6 +1137,8 @@ extern au1xxx_irq_map_t au1xxx_irq_map[]; #define USBDEV_ENABLE (1<<1) #define USBDEV_CE (1<<0) +#endif /* !CONFIG_SOC_AU1200 */ + /* Ethernet Controllers */ /* 4 byte offsets from AU1000_ETH_BASE */ @@ -1173,6 +1537,37 @@ extern au1xxx_irq_map_t au1xxx_irq_map[]; #define SYS_PF_PSC1_S1 (1 << 1) #define SYS_PF_MUST_BE_SET ((1 << 5) | (1 << 2)) +/* Au1200 Only */ +#ifdef CONFIG_SOC_AU1200 +#define SYS_PINFUNC_DMA (1<<31) +#define SYS_PINFUNC_S0A (1<<30) +#define SYS_PINFUNC_S1A (1<<29) +#define SYS_PINFUNC_LP0 (1<<28) +#define SYS_PINFUNC_LP1 (1<<27) +#define SYS_PINFUNC_LD16 (1<<26) +#define SYS_PINFUNC_LD8 (1<<25) +#define SYS_PINFUNC_LD1 (1<<24) +#define SYS_PINFUNC_LD0 (1<<23) +#define SYS_PINFUNC_P1A (3<<21) +#define SYS_PINFUNC_P1B (1<<20) +#define SYS_PINFUNC_FS3 (1<<19) +#define SYS_PINFUNC_P0A (3<<17) +#define SYS_PINFUNC_CS (1<<16) +#define SYS_PINFUNC_CIM (1<<15) +#define SYS_PINFUNC_P1C (1<<14) +#define SYS_PINFUNC_U1T (1<<12) +#define SYS_PINFUNC_U1R (1<<11) +#define SYS_PINFUNC_EX1 (1<<10) +#define SYS_PINFUNC_EX0 (1<<9) +#define SYS_PINFUNC_U0R (1<<8) +#define SYS_PINFUNC_MC (1<<7) +#define SYS_PINFUNC_S0B (1<<6) +#define SYS_PINFUNC_S0C (1<<5) +#define SYS_PINFUNC_P0B (1<<4) +#define SYS_PINFUNC_U0T (1<<3) +#define SYS_PINFUNC_S1B (1<<2) +#endif + #define SYS_TRIOUTRD 0xB1900100 #define SYS_TRIOUTCLR 0xB1900100 #define SYS_OUTPUTRD 0xB1900108 @@ -1300,7 +1695,6 @@ extern au1xxx_irq_map_t au1xxx_irq_map[]; #define SD1_XMIT_FIFO 0xB0680000 #define SD1_RECV_FIFO 0xB0680004 - #if defined (CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550) /* Au1500 PCI Controller */ #define Au1500_CFG_BASE 0xB4005000 // virtual, kseg0 addr @@ -1363,36 +1757,77 @@ extern au1xxx_irq_map_t au1xxx_irq_map[]; _ctl_; }) -#else /* Au1000 and Au1100 */ +#else /* Au1000 and Au1100 and Au1200 */ /* don't allow any legacy ports probing */ -#define IOPORT_RESOURCE_START 0x10000000; +#define IOPORT_RESOURCE_START 0x10000000 #define IOPORT_RESOURCE_END 0xffffffff #define IOMEM_RESOURCE_START 0x10000000 #define IOMEM_RESOURCE_END 0xffffffff -#ifdef CONFIG_MIPS_PB1000 -#define PCI_IO_START 0x10000000 -#define PCI_IO_END 0x1000ffff -#define PCI_MEM_START 0x18000000 -#define PCI_MEM_END 0x18ffffff -#define PCI_FIRST_DEVFN 0 -#define PCI_LAST_DEVFN 1 -#else -/* no PCI bus controller */ #define PCI_IO_START 0 #define PCI_IO_END 0 #define PCI_MEM_START 0 #define PCI_MEM_END 0 #define PCI_FIRST_DEVFN 0 #define PCI_LAST_DEVFN 0 -#endif #endif +#ifndef _LANGUAGE_ASSEMBLY +typedef volatile struct +{ + /* 0x0000 */ u32 toytrim; + /* 0x0004 */ u32 toywrite; + /* 0x0008 */ u32 toymatch0; + /* 0x000C */ u32 toymatch1; + /* 0x0010 */ u32 toymatch2; + /* 0x0014 */ u32 cntrctrl; + /* 0x0018 */ u32 scratch0; + /* 0x001C */ u32 scratch1; + /* 0x0020 */ u32 freqctrl0; + /* 0x0024 */ u32 freqctrl1; + /* 0x0028 */ u32 clksrc; + /* 0x002C */ u32 pinfunc; + /* 0x0030 */ u32 reserved0; + /* 0x0034 */ u32 wakemsk; + /* 0x0038 */ u32 endian; + /* 0x003C */ u32 powerctrl; + /* 0x0040 */ u32 toyread; + /* 0x0044 */ u32 rtctrim; + /* 0x0048 */ u32 rtcwrite; + /* 0x004C */ u32 rtcmatch0; + /* 0x0050 */ u32 rtcmatch1; + /* 0x0054 */ u32 rtcmatch2; + /* 0x0058 */ u32 rtcread; + /* 0x005C */ u32 wakesrc; + /* 0x0060 */ u32 cpupll; + /* 0x0064 */ u32 auxpll; + /* 0x0068 */ u32 reserved1; + /* 0x006C */ u32 reserved2; + /* 0x0070 */ u32 reserved3; + /* 0x0074 */ u32 reserved4; + /* 0x0078 */ u32 slppwr; + /* 0x007C */ u32 sleep; + /* 0x0080 */ u32 reserved5[32]; + /* 0x0100 */ u32 trioutrd; +#define trioutclr trioutrd + /* 0x0104 */ u32 reserved6; + /* 0x0108 */ u32 outputrd; +#define outputset outputrd + /* 0x010C */ u32 outputclr; + /* 0x0110 */ u32 pinstaterd; +#define pininputen pinstaterd + +} AU1X00_SYS; + +static AU1X00_SYS* const sys = (AU1X00_SYS *)SYS_BASE; + +#endif /* Processor information base on prid. * Copied from PowerPC. */ +#ifndef _LANGUAGE_ASSEMBLY struct cpu_spec { /* CPU is matched via (PRID & prid_mask) == prid_value */ unsigned int prid_mask; @@ -1406,3 +1841,6 @@ struct cpu_spec { extern struct cpu_spec cpu_specs[]; extern struct cpu_spec *cur_cpu_spec[]; #endif + +#endif + diff --git a/include/asm-mips/mach-au1x00/au1xxx_dbdma.h b/include/asm-mips/mach-au1x00/au1xxx_dbdma.h index d5eb88cd7d517..ddbd9f5a24895 100644 --- a/include/asm-mips/mach-au1x00/au1xxx_dbdma.h +++ b/include/asm-mips/mach-au1x00/au1xxx_dbdma.h @@ -45,7 +45,7 @@ #define DDMA_GLOBAL_BASE 0xb4003000 #define DDMA_CHANNEL_BASE 0xb4002000 -typedef struct dbdma_global { +typedef volatile struct dbdma_global { u32 ddma_config; u32 ddma_intstat; u32 ddma_throttle; @@ -62,7 +62,7 @@ typedef struct dbdma_global { /* The structure of a DMA Channel. */ -typedef struct au1xxx_dma_channel { +typedef volatile struct au1xxx_dma_channel { u32 ddma_cfg; /* See below */ u32 ddma_desptr; /* 32-byte aligned pointer to descriptor */ u32 ddma_statptr; /* word aligned pointer to status word */ @@ -98,7 +98,7 @@ typedef struct au1xxx_dma_channel { /* "Standard" DDMA Descriptor. * Must be 32-byte aligned. */ -typedef struct au1xxx_ddma_desc { +typedef volatile struct au1xxx_ddma_desc { u32 dscr_cmd0; /* See below */ u32 dscr_cmd1; /* See below */ u32 dscr_source0; /* source phys address */ @@ -107,6 +107,12 @@ typedef struct au1xxx_ddma_desc { u32 dscr_dest1; /* See below */ u32 dscr_stat; /* completion status */ u32 dscr_nxtptr; /* Next descriptor pointer (mostly) */ + /* First 32bytes are HW specific!!! + Lets have some SW data following.. make sure its 32bytes + */ + u32 sw_status; + u32 sw_context; + u32 sw_reserved[6]; } au1x_ddma_desc_t; #define DSCR_CMD0_V (1 << 31) /* Descriptor valid */ @@ -125,8 +131,11 @@ typedef struct au1xxx_ddma_desc { #define DSCR_CMD0_CV (0x1 << 2) /* Clear Valid when done */ #define DSCR_CMD0_ST_MASK (0x3 << 0) /* Status instruction */ +#define SW_STATUS_INUSE (1<<0) + /* Command 0 device IDs. */ +#ifdef CONFIG_SOC_AU1550 #define DSCR_CMD0_UART0_TX 0 #define DSCR_CMD0_UART0_RX 1 #define DSCR_CMD0_UART3_TX 2 @@ -155,9 +164,45 @@ typedef struct au1xxx_ddma_desc { #define DSCR_CMD0_MAC0_TX 25 #define DSCR_CMD0_MAC1_RX 26 #define DSCR_CMD0_MAC1_TX 27 +#endif /* CONFIG_SOC_AU1550 */ + +#ifdef CONFIG_SOC_AU1200 +#define DSCR_CMD0_UART0_TX 0 +#define DSCR_CMD0_UART0_RX 1 +#define DSCR_CMD0_UART1_TX 2 +#define DSCR_CMD0_UART1_RX 3 +#define DSCR_CMD0_DMA_REQ0 4 +#define DSCR_CMD0_DMA_REQ1 5 +#define DSCR_CMD0_MAE_BE 6 +#define DSCR_CMD0_MAE_FE 7 +#define DSCR_CMD0_SDMS_TX0 8 +#define DSCR_CMD0_SDMS_RX0 9 +#define DSCR_CMD0_SDMS_TX1 10 +#define DSCR_CMD0_SDMS_RX1 11 +#define DSCR_CMD0_AES_TX 13 +#define DSCR_CMD0_AES_RX 12 +#define DSCR_CMD0_PSC0_TX 14 +#define DSCR_CMD0_PSC0_RX 15 +#define DSCR_CMD0_PSC1_TX 16 +#define DSCR_CMD0_PSC1_RX 17 +#define DSCR_CMD0_CIM_RXA 18 +#define DSCR_CMD0_CIM_RXB 19 +#define DSCR_CMD0_CIM_RXC 20 +#define DSCR_CMD0_MAE_BOTH 21 +#define DSCR_CMD0_LCD 22 +#define DSCR_CMD0_NAND_FLASH 23 +#define DSCR_CMD0_PSC0_SYNC 24 +#define DSCR_CMD0_PSC1_SYNC 25 +#define DSCR_CMD0_CIM_SYNC 26 +#endif /* CONFIG_SOC_AU1200 */ + #define DSCR_CMD0_THROTTLE 30 #define DSCR_CMD0_ALWAYS 31 #define DSCR_NDEV_IDS 32 +/* THis macro is used to find/create custom device types */ +#define DSCR_DEV2CUSTOM_ID(x,d) (((((x)&0xFFFF)<<8)|0x32000000)|((d)&0xFF)) +#define DSCR_CUSTOM2DEV_ID(x) ((x)&0xFF) + #define DSCR_CMD0_SID(x) (((x) & 0x1f) << 25) #define DSCR_CMD0_DID(x) (((x) & 0x1f) << 20) @@ -246,6 +291,43 @@ typedef struct au1xxx_ddma_desc { */ #define NUM_DBDMA_CHANS 16 +/* + * Ddma API definitions + * FIXME: may not fit to this header file + */ +typedef struct dbdma_device_table { + u32 dev_id; + u32 dev_flags; + u32 dev_tsize; + u32 dev_devwidth; + u32 dev_physaddr; /* If FIFO */ + u32 dev_intlevel; + u32 dev_intpolarity; +} dbdev_tab_t; + + +typedef struct dbdma_chan_config { + spinlock_t lock; + + u32 chan_flags; + u32 chan_index; + dbdev_tab_t *chan_src; + dbdev_tab_t *chan_dest; + au1x_dma_chan_t *chan_ptr; + au1x_ddma_desc_t *chan_desc_base; + au1x_ddma_desc_t *get_ptr, *put_ptr, *cur_ptr; + void *chan_callparam; + void (*chan_callback)(int, void *, struct pt_regs *); +} chan_tab_t; + +#define DEV_FLAGS_INUSE (1 << 0) +#define DEV_FLAGS_ANYUSE (1 << 1) +#define DEV_FLAGS_OUT (1 << 2) +#define DEV_FLAGS_IN (1 << 3) +#define DEV_FLAGS_BURSTABLE (1 << 4) +#define DEV_FLAGS_SYNC (1 << 5) +/* end Ddma API definitions */ + /* External functions for drivers to use. */ /* Use this to allocate a dbdma channel. The device ids are one of the @@ -258,18 +340,6 @@ u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid, #define DBDMA_MEM_CHAN DSCR_CMD0_ALWAYS -/* ACK! These should be in a board specific description file. -*/ -#ifdef CONFIG_MIPS_PB1550 -#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX -#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX -#endif -#ifdef CONFIG_MIPS_DB1550 -#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX -#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX -#endif - - /* Set the device width of a in/out fifo. */ u32 au1xxx_dbdma_set_devwidth(u32 chanid, int bits); @@ -280,8 +350,8 @@ u32 au1xxx_dbdma_ring_alloc(u32 chanid, int entries); /* Put buffers on source/destination descriptors. */ -u32 au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes); -u32 au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes); +u32 _au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags); +u32 _au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags); /* Get a buffer from the destination descriptor. */ @@ -295,5 +365,25 @@ u32 au1xxx_get_dma_residue(u32 chanid); void au1xxx_dbdma_chan_free(u32 chanid); void au1xxx_dbdma_dump(u32 chanid); +u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr ); + +u32 au1xxx_ddma_add_device( dbdev_tab_t *dev ); + +/* + Some compatibilty macros -- + Needed to make changes to API without breaking existing drivers +*/ +#define au1xxx_dbdma_put_source(chanid,buf,nbytes)_au1xxx_dbdma_put_source(chanid, buf, nbytes, DDMA_FLAGS_IE) +#define au1xxx_dbdma_put_source_flags(chanid,buf,nbytes,flags) _au1xxx_dbdma_put_source(chanid, buf, nbytes, flags) + +#define au1xxx_dbdma_put_dest(chanid,buf,nbytes) _au1xxx_dbdma_put_dest(chanid, buf, nbytes, DDMA_FLAGS_IE) +#define au1xxx_dbdma_put_dest_flags(chanid,buf,nbytes,flags) _au1xxx_dbdma_put_dest(chanid, buf, nbytes, flags) + +/* + * Flags for the put_source/put_dest functions. + */ +#define DDMA_FLAGS_IE (1<<0) +#define DDMA_FLAGS_NOIE (1<<1) + #endif /* _LANGUAGE_ASSEMBLY */ #endif /* _AU1000_DBDMA_H_ */ |