diff options
Diffstat (limited to 'drivers/media/dvb/frontends/cx24110.c')
| -rw-r--r-- | drivers/media/dvb/frontends/cx24110.c | 23 |
1 files changed, 11 insertions, 12 deletions
diff --git a/drivers/media/dvb/frontends/cx24110.c b/drivers/media/dvb/frontends/cx24110.c index 0c4db80ec332b7..d15d32c51dc5dd 100644 --- a/drivers/media/dvb/frontends/cx24110.c +++ b/drivers/media/dvb/frontends/cx24110.c @@ -27,7 +27,6 @@ #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/init.h> -#include <linux/jiffies.h> #include "dvb_frontend.h" #include "cx24110.h" @@ -56,7 +55,7 @@ static int debug; static struct {u8 reg; u8 data;} cx24110_regdata[]= /* Comments beginning with @ denote this value should - be the default */ + be the default */ {{0x09,0x01}, /* SoftResetAll */ {0x09,0x00}, /* release reset */ {0x01,0xe8}, /* MSB of code rate 27.5MS/s */ @@ -67,26 +66,26 @@ static struct {u8 reg; u8 data;} cx24110_regdata[]= {0x07,0x01}, /* @ Fclk, i.e. sampling clock, 60MHz */ {0x0a,0x00}, /* @ partial chip disables, do not set */ {0x0b,0x01}, /* set output clock in gapped mode, start signal low - active for first byte */ + active for first byte */ {0x0c,0x11}, /* no parity bytes, large hold time, serial data out */ {0x0d,0x6f}, /* @ RS Sync/Unsync thresholds */ {0x10,0x40}, /* chip doc is misleading here: write bit 6 as 1 - to avoid starting the BER counter. Reset the - CRC test bit. Finite counting selected */ + to avoid starting the BER counter. Reset the + CRC test bit. Finite counting selected */ {0x15,0xff}, /* @ size of the limited time window for RS BER - estimation. It is <value>*256 RS blocks, this - gives approx. 2.6 sec at 27.5MS/s, rate 3/4 */ + estimation. It is <value>*256 RS blocks, this + gives approx. 2.6 sec at 27.5MS/s, rate 3/4 */ {0x16,0x00}, /* @ enable all RS output ports */ {0x17,0x04}, /* @ time window allowed for the RS to sync */ {0x18,0xae}, /* @ allow all standard DVB code rates to be scanned - for automatically */ + for automatically */ /* leave the current code rate and normalization - registers as they are after reset... */ + registers as they are after reset... */ {0x21,0x10}, /* @ during AutoAcq, search each viterbi setting - only once */ + only once */ {0x23,0x18}, /* @ size of the limited time window for Viterbi BER - estimation. It is <value>*65536 channel bits, i.e. - approx. 38ms at 27.5MS/s, rate 3/4 */ + estimation. It is <value>*65536 channel bits, i.e. + approx. 38ms at 27.5MS/s, rate 3/4 */ {0x24,0x24}, /* do not trigger Viterbi CRC test. Finite count window */ /* leave front-end AGC parameters at default values */ /* leave decimation AGC parameters at default values */ |