diff options
Diffstat (limited to 'drivers/i2c/chips/x1205.c')
| -rw-r--r-- | drivers/i2c/chips/x1205.c | 698 |
1 files changed, 0 insertions, 698 deletions
diff --git a/drivers/i2c/chips/x1205.c b/drivers/i2c/chips/x1205.c deleted file mode 100644 index 245fffa92dbd44..00000000000000 --- a/drivers/i2c/chips/x1205.c +++ /dev/null @@ -1,698 +0,0 @@ -/* - * x1205.c - An i2c driver for the Xicor X1205 RTC - * Copyright 2004 Karen Spearel - * Copyright 2005 Alessandro Zummo - * - * please send all reports to: - * kas11 at tampabay dot rr dot com - * a dot zummo at towertech dot it - * - * based on the other drivers in this same directory. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/i2c.h> -#include <linux/string.h> -#include <linux/bcd.h> -#include <linux/rtc.h> -#include <linux/list.h> - -#include <linux/x1205.h> - -#define DRV_VERSION "0.9.9" - -/* Addresses to scan: none. This chip is located at - * 0x6f and uses a two bytes register addressing. - * Two bytes need to be written to read a single register, - * while most other chips just require one and take the second - * one as the data to be written. To prevent corrupting - * unknown chips, the user must explicitely set the probe parameter. - */ - -static unsigned short normal_i2c[] = { I2C_CLIENT_END }; - -/* Insmod parameters */ -I2C_CLIENT_INSMOD; -I2C_CLIENT_MODULE_PARM(hctosys, - "Set the system time from the hardware clock upon initialization"); - -/* offsets into CCR area */ - -#define CCR_SEC 0 -#define CCR_MIN 1 -#define CCR_HOUR 2 -#define CCR_MDAY 3 -#define CCR_MONTH 4 -#define CCR_YEAR 5 -#define CCR_WDAY 6 -#define CCR_Y2K 7 - -#define X1205_REG_SR 0x3F /* status register */ -#define X1205_REG_Y2K 0x37 -#define X1205_REG_DW 0x36 -#define X1205_REG_YR 0x35 -#define X1205_REG_MO 0x34 -#define X1205_REG_DT 0x33 -#define X1205_REG_HR 0x32 -#define X1205_REG_MN 0x31 -#define X1205_REG_SC 0x30 -#define X1205_REG_DTR 0x13 -#define X1205_REG_ATR 0x12 -#define X1205_REG_INT 0x11 -#define X1205_REG_0 0x10 -#define X1205_REG_Y2K1 0x0F -#define X1205_REG_DWA1 0x0E -#define X1205_REG_YRA1 0x0D -#define X1205_REG_MOA1 0x0C -#define X1205_REG_DTA1 0x0B -#define X1205_REG_HRA1 0x0A -#define X1205_REG_MNA1 0x09 -#define X1205_REG_SCA1 0x08 -#define X1205_REG_Y2K0 0x07 -#define X1205_REG_DWA0 0x06 -#define X1205_REG_YRA0 0x05 -#define X1205_REG_MOA0 0x04 -#define X1205_REG_DTA0 0x03 -#define X1205_REG_HRA0 0x02 -#define X1205_REG_MNA0 0x01 -#define X1205_REG_SCA0 0x00 - -#define X1205_CCR_BASE 0x30 /* Base address of CCR */ -#define X1205_ALM0_BASE 0x00 /* Base address of ALARM0 */ - -#define X1205_SR_RTCF 0x01 /* Clock failure */ -#define X1205_SR_WEL 0x02 /* Write Enable Latch */ -#define X1205_SR_RWEL 0x04 /* Register Write Enable */ - -#define X1205_DTR_DTR0 0x01 -#define X1205_DTR_DTR1 0x02 -#define X1205_DTR_DTR2 0x04 - -#define X1205_HR_MIL 0x80 /* Set in ccr.hour for 24 hr mode */ - -/* Prototypes */ -static int x1205_attach(struct i2c_adapter *adapter); -static int x1205_detach(struct i2c_client *client); -static int x1205_probe(struct i2c_adapter *adapter, int address, int kind); -static int x1205_command(struct i2c_client *client, unsigned int cmd, - void *arg); - -static struct i2c_driver x1205_driver = { - .driver = { - .name = "x1205", - }, - .attach_adapter = &x1205_attach, - .detach_client = &x1205_detach, -}; - -struct x1205_data { - struct i2c_client client; - struct list_head list; - unsigned int epoch; -}; - -static const unsigned char days_in_mo[] = - { 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 }; - -static LIST_HEAD(x1205_clients); - -/* Workaround until the I2C subsytem will allow to send - * commands to a specific client. This function will send the command - * to the first client. - */ -int x1205_do_command(unsigned int cmd, void *arg) -{ - struct list_head *walk; - struct list_head *tmp; - struct x1205_data *data; - - list_for_each_safe(walk, tmp, &x1205_clients) { - data = list_entry(walk, struct x1205_data, list); - return x1205_command(&data->client, cmd, arg); - } - - return -ENODEV; -} - -#define is_leap(year) \ - ((year) % 4 == 0 && ((year) % 100 != 0 || (year) % 400 == 0)) - -/* make sure the rtc_time values are in bounds */ -static int x1205_validate_tm(struct rtc_time *tm) -{ - int year = tm->tm_year + 1900; - - if ((tm->tm_year < 70) || (tm->tm_year > 255)) - return -EINVAL; - - if ((tm->tm_mon > 11) || (tm->tm_mday == 0)) - return -EINVAL; - - if (tm->tm_mday > days_in_mo[tm->tm_mon] - + ((tm->tm_mon == 1) && is_leap(year))) - return -EINVAL; - - if ((tm->tm_hour >= 24) || (tm->tm_min >= 60) || (tm->tm_sec >= 60)) - return -EINVAL; - - return 0; -} - -/* - * In the routines that deal directly with the x1205 hardware, we use - * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch - * Epoch is initialized as 2000. Time is set to UTC. - */ -static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm, - u8 reg_base) -{ - unsigned char dt_addr[2] = { 0, reg_base }; - static unsigned char sr_addr[2] = { 0, X1205_REG_SR }; - - unsigned char buf[8], sr; - - struct i2c_msg msgs[] = { - { client->addr, 0, 2, sr_addr }, /* setup read ptr */ - { client->addr, I2C_M_RD, 1, &sr }, /* read status */ - { client->addr, 0, 2, dt_addr }, /* setup read ptr */ - { client->addr, I2C_M_RD, 8, buf }, /* read date */ - }; - - struct x1205_data *data = i2c_get_clientdata(client); - - /* read status register */ - if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) { - dev_err(&client->dev, "%s: read error\n", __FUNCTION__); - return -EIO; - } - - /* check for battery failure */ - if (sr & X1205_SR_RTCF) { - dev_warn(&client->dev, - "Clock had a power failure, you must set the date.\n"); - return -EINVAL; - } - - /* read date registers */ - if ((i2c_transfer(client->adapter, &msgs[2], 2)) != 2) { - dev_err(&client->dev, "%s: read error\n", __FUNCTION__); - return -EIO; - } - - dev_dbg(&client->dev, - "%s: raw read data - sec=%02x, min=%02x, hr=%02x, " - "mday=%02x, mon=%02x, year=%02x, wday=%02x, y2k=%02x\n", - __FUNCTION__, - buf[0], buf[1], buf[2], buf[3], - buf[4], buf[5], buf[6], buf[7]); - - tm->tm_sec = BCD2BIN(buf[CCR_SEC]); - tm->tm_min = BCD2BIN(buf[CCR_MIN]); - tm->tm_hour = BCD2BIN(buf[CCR_HOUR] & 0x3F); /* hr is 0-23 */ - tm->tm_mday = BCD2BIN(buf[CCR_MDAY]); - tm->tm_mon = BCD2BIN(buf[CCR_MONTH]); - data->epoch = BCD2BIN(buf[CCR_Y2K]) * 100; - tm->tm_year = BCD2BIN(buf[CCR_YEAR]) + data->epoch - 1900; - tm->tm_wday = buf[CCR_WDAY]; - - dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, " - "mday=%d, mon=%d, year=%d, wday=%d\n", - __FUNCTION__, - tm->tm_sec, tm->tm_min, tm->tm_hour, - tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); - - return 0; -} - -static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm, - int datetoo, u8 reg_base) -{ - int i, err, xfer; - - unsigned char buf[8]; - - static const unsigned char wel[3] = { 0, X1205_REG_SR, - X1205_SR_WEL }; - - static const unsigned char rwel[3] = { 0, X1205_REG_SR, - X1205_SR_WEL | X1205_SR_RWEL }; - - static const unsigned char diswe[3] = { 0, X1205_REG_SR, 0 }; - - struct x1205_data *data = i2c_get_clientdata(client); - - /* check if all values in the tm struct are correct */ - if ((err = x1205_validate_tm(tm)) < 0) - return err; - - dev_dbg(&client->dev, "%s: secs=%d, mins=%d, hours=%d, " - "mday=%d, mon=%d, year=%d, wday=%d\n", - __FUNCTION__, - tm->tm_sec, tm->tm_min, tm->tm_hour, - tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); - - buf[CCR_SEC] = BIN2BCD(tm->tm_sec); - buf[CCR_MIN] = BIN2BCD(tm->tm_min); - - /* set hour and 24hr bit */ - buf[CCR_HOUR] = BIN2BCD(tm->tm_hour) | X1205_HR_MIL; - - /* should we also set the date? */ - if (datetoo) { - buf[CCR_MDAY] = BIN2BCD(tm->tm_mday); - - /* month, 0 - 11 */ - buf[CCR_MONTH] = BIN2BCD(tm->tm_mon); - - /* year, since 1900 */ - buf[CCR_YEAR] = BIN2BCD(tm->tm_year + 1900 - data->epoch); - buf[CCR_WDAY] = tm->tm_wday & 0x07; - buf[CCR_Y2K] = BIN2BCD(data->epoch / 100); - } - - /* this sequence is required to unlock the chip */ - xfer = i2c_master_send(client, wel, 3); - if (xfer != 3) { - dev_err(&client->dev, "%s: wel - %d\n", __FUNCTION__, xfer); - return -EIO; - } - - xfer = i2c_master_send(client, rwel, 3); - if (xfer != 3) { - dev_err(&client->dev, "%s: rwel - %d\n", __FUNCTION__, xfer); - return -EIO; - } - - /* write register's data */ - for (i = 0; i < (datetoo ? 8 : 3); i++) { - unsigned char rdata[3] = { 0, reg_base + i, buf[i] }; - - xfer = i2c_master_send(client, rdata, 3); - if (xfer != 3) { - dev_err(&client->dev, - "%s: xfer=%d addr=%02x, data=%02x\n", - __FUNCTION__, - xfer, rdata[1], rdata[2]); - return -EIO; - } - }; - - /* disable further writes */ - xfer = i2c_master_send(client, diswe, 3); - if (xfer != 3) { - dev_err(&client->dev, "%s: diswe - %d\n", __FUNCTION__, xfer); - return -EIO; - } - - return 0; -} - -static int x1205_get_dtrim(struct i2c_client *client, int *trim) -{ - unsigned char dtr; - static unsigned char dtr_addr[2] = { 0, X1205_REG_DTR }; - - struct i2c_msg msgs[] = { - { client->addr, 0, 2, dtr_addr }, /* setup read ptr */ - { client->addr, I2C_M_RD, 1, &dtr }, /* read dtr */ - }; - - /* read dtr register */ - if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) { - dev_err(&client->dev, "%s: read error\n", __FUNCTION__); - return -EIO; - } - - dev_dbg(&client->dev, "%s: raw dtr=%x\n", __FUNCTION__, dtr); - - *trim = 0; - - if (dtr & X1205_DTR_DTR0) - *trim += 20; - - if (dtr & X1205_DTR_DTR1) - *trim += 10; - - if (dtr & X1205_DTR_DTR2) - *trim = -*trim; - - return 0; -} - -static int x1205_get_atrim(struct i2c_client *client, int *trim) -{ - s8 atr; - static unsigned char atr_addr[2] = { 0, X1205_REG_ATR }; - - struct i2c_msg msgs[] = { - { client->addr, 0, 2, atr_addr }, /* setup read ptr */ - { client->addr, I2C_M_RD, 1, &atr }, /* read atr */ - }; - - /* read atr register */ - if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) { - dev_err(&client->dev, "%s: read error\n", __FUNCTION__); - return -EIO; - } - - dev_dbg(&client->dev, "%s: raw atr=%x\n", __FUNCTION__, atr); - - /* atr is a two's complement value on 6 bits, - * perform sign extension. The formula is - * Catr = (atr * 0.25pF) + 11.00pF. - */ - if (atr & 0x20) - atr |= 0xC0; - - dev_dbg(&client->dev, "%s: raw atr=%x (%d)\n", __FUNCTION__, atr, atr); - - *trim = (atr * 250) + 11000; - - dev_dbg(&client->dev, "%s: real=%d\n", __FUNCTION__, *trim); - - return 0; -} - -static int x1205_hctosys(struct i2c_client *client) -{ - int err; - - struct rtc_time tm; - struct timespec tv; - - err = x1205_command(client, X1205_CMD_GETDATETIME, &tm); - - if (err) { - dev_err(&client->dev, - "Unable to set the system clock\n"); - return err; - } - - /* IMPORTANT: the RTC only stores whole seconds. It is arbitrary - * whether it stores the most close value or the value with partial - * seconds truncated. However, it is important that we use it to store - * the truncated value. This is because otherwise it is necessary, - * in an rtc sync function, to read both xtime.tv_sec and - * xtime.tv_nsec. On some processors (i.e. ARM), an atomic read - * of >32bits is not possible. So storing the most close value would - * slow down the sync API. So here we have the truncated value and - * the best guess is to add 0.5s. - */ - - tv.tv_nsec = NSEC_PER_SEC >> 1; - - /* WARNING: this is not the C library 'mktime' call, it is a built in - * inline function from include/linux/time.h. It expects (requires) - * the month to be in the range 1-12 - */ - - tv.tv_sec = mktime(tm.tm_year + 1900, tm.tm_mon + 1, - tm.tm_mday, tm.tm_hour, - tm.tm_min, tm.tm_sec); - - do_settimeofday(&tv); - - dev_info(&client->dev, - "setting the system clock to %d-%d-%d %d:%d:%d\n", - tm.tm_year + 1900, tm.tm_mon + 1, - tm.tm_mday, tm.tm_hour, tm.tm_min, - tm.tm_sec); - - return 0; -} - -struct x1205_limit -{ - unsigned char reg; - unsigned char mask; - unsigned char min; - unsigned char max; -}; - -static int x1205_validate_client(struct i2c_client *client) -{ - int i, xfer; - - /* Probe array. We will read the register at the specified - * address and check if the given bits are zero. - */ - static const unsigned char probe_zero_pattern[] = { - /* register, mask */ - X1205_REG_SR, 0x18, - X1205_REG_DTR, 0xF8, - X1205_REG_ATR, 0xC0, - X1205_REG_INT, 0x18, - X1205_REG_0, 0xFF, - }; - - static const struct x1205_limit probe_limits_pattern[] = { - /* register, mask, min, max */ - { X1205_REG_Y2K, 0xFF, 19, 20 }, - { X1205_REG_DW, 0xFF, 0, 6 }, - { X1205_REG_YR, 0xFF, 0, 99 }, - { X1205_REG_MO, 0xFF, 0, 12 }, - { X1205_REG_DT, 0xFF, 0, 31 }, - { X1205_REG_HR, 0x7F, 0, 23 }, - { X1205_REG_MN, 0xFF, 0, 59 }, - { X1205_REG_SC, 0xFF, 0, 59 }, - { X1205_REG_Y2K1, 0xFF, 19, 20 }, - { X1205_REG_Y2K0, 0xFF, 19, 20 }, - }; - - /* check that registers have bits a 0 where expected */ - for (i = 0; i < ARRAY_SIZE(probe_zero_pattern); i += 2) { - unsigned char buf; - - unsigned char addr[2] = { 0, probe_zero_pattern[i] }; - - struct i2c_msg msgs[2] = { - { client->addr, 0, 2, addr }, - { client->addr, I2C_M_RD, 1, &buf }, - }; - - xfer = i2c_transfer(client->adapter, msgs, 2); - if (xfer != 2) { - dev_err(&client->adapter->dev, - "%s: could not read register %x\n", - __FUNCTION__, addr[1]); - - return -EIO; - } - - if ((buf & probe_zero_pattern[i+1]) != 0) { - dev_err(&client->adapter->dev, - "%s: register=%02x, zero pattern=%d, value=%x\n", - __FUNCTION__, addr[1], i, buf); - - return -ENODEV; - } - } - - /* check limits (only registers with bcd values) */ - for (i = 0; i < ARRAY_SIZE(probe_limits_pattern); i++) { - unsigned char reg, value; - - unsigned char addr[2] = { 0, probe_limits_pattern[i].reg }; - - struct i2c_msg msgs[2] = { - { client->addr, 0, 2, addr }, - { client->addr, I2C_M_RD, 1, ® }, - }; - - xfer = i2c_transfer(client->adapter, msgs, 2); - - if (xfer != 2) { - dev_err(&client->adapter->dev, - "%s: could not read register %x\n", - __FUNCTION__, addr[1]); - - return -EIO; - } - - value = BCD2BIN(reg & probe_limits_pattern[i].mask); - - if (value > probe_limits_pattern[i].max || - value < probe_limits_pattern[i].min) { - dev_dbg(&client->adapter->dev, - "%s: register=%x, lim pattern=%d, value=%d\n", - __FUNCTION__, addr[1], i, value); - - return -ENODEV; - } - } - - return 0; -} - -static int x1205_attach(struct i2c_adapter *adapter) -{ - dev_dbg(&adapter->dev, "%s\n", __FUNCTION__); - - return i2c_probe(adapter, &addr_data, x1205_probe); -} - -int x1205_direct_attach(int adapter_id, - struct i2c_client_address_data *address_data) -{ - int err; - struct i2c_adapter *adapter = i2c_get_adapter(adapter_id); - - if (adapter) { - err = i2c_probe(adapter, - address_data, x1205_probe); - - i2c_put_adapter(adapter); - - return err; - } - - return -ENODEV; -} - -static int x1205_probe(struct i2c_adapter *adapter, int address, int kind) -{ - struct i2c_client *client; - struct x1205_data *data; - - int err = 0; - - dev_dbg(&adapter->dev, "%s\n", __FUNCTION__); - - if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) { - err = -ENODEV; - goto exit; - } - - if (!(data = kzalloc(sizeof(struct x1205_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - - /* Initialize our structures */ - data->epoch = 2000; - - client = &data->client; - client->addr = address; - client->driver = &x1205_driver; - client->adapter = adapter; - - strlcpy(client->name, "x1205", I2C_NAME_SIZE); - - i2c_set_clientdata(client, data); - - /* Verify the chip is really an X1205 */ - if (kind < 0) { - if (x1205_validate_client(client) < 0) { - err = -ENODEV; - goto exit_kfree; - } - } - - /* Inform the i2c layer */ - if ((err = i2c_attach_client(client))) - goto exit_kfree; - - list_add(&data->list, &x1205_clients); - - dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n"); - - /* If requested, set the system time */ - if (hctosys) - x1205_hctosys(client); - - return 0; - -exit_kfree: - kfree(data); - -exit: - return err; -} - -static int x1205_detach(struct i2c_client *client) -{ - int err; - struct x1205_data *data = i2c_get_clientdata(client); - - dev_dbg(&client->dev, "%s\n", __FUNCTION__); - - if ((err = i2c_detach_client(client))) - return err; - - list_del(&data->list); - - kfree(data); - - return 0; -} - -static int x1205_command(struct i2c_client *client, unsigned int cmd, - void *param) -{ - if (param == NULL) - return -EINVAL; - - if (!capable(CAP_SYS_TIME)) - return -EACCES; - - dev_dbg(&client->dev, "%s: cmd=%d\n", __FUNCTION__, cmd); - - switch (cmd) { - case X1205_CMD_GETDATETIME: - return x1205_get_datetime(client, param, X1205_CCR_BASE); - - case X1205_CMD_SETTIME: - return x1205_set_datetime(client, param, 0, - X1205_CCR_BASE); - - case X1205_CMD_SETDATETIME: - return x1205_set_datetime(client, param, 1, - X1205_CCR_BASE); - - case X1205_CMD_GETALARM: - return x1205_get_datetime(client, param, X1205_ALM0_BASE); - - case X1205_CMD_SETALARM: - return x1205_set_datetime(client, param, 1, - X1205_ALM0_BASE); - - case X1205_CMD_GETDTRIM: - return x1205_get_dtrim(client, param); - - case X1205_CMD_GETATRIM: - return x1205_get_atrim(client, param); - - default: - return -EINVAL; - } -} - -static int __init x1205_init(void) -{ - return i2c_add_driver(&x1205_driver); -} - -static void __exit x1205_exit(void) -{ - i2c_del_driver(&x1205_driver); -} - -MODULE_AUTHOR( - "Karen Spearel <kas11@tampabay.rr.com>, " - "Alessandro Zummo <a.zummo@towertech.it>"); -MODULE_DESCRIPTION("Xicor X1205 RTC driver"); -MODULE_LICENSE("GPL"); -MODULE_VERSION(DRV_VERSION); - -EXPORT_SYMBOL_GPL(x1205_do_command); -EXPORT_SYMBOL_GPL(x1205_direct_attach); - -module_init(x1205_init); -module_exit(x1205_exit); |