1 files changed, 19 insertions, 134 deletions

diff --git a/arch/i386/kernel/time.c b/arch/i386/kernel/time.c
index 796e5faa6ca7ce..2a6ab86ffc1571 100644
--- a/arch/i386/kernel/time.c
+++ b/arch/i386/kernel/time.c
@@ -82,7 +82,8 @@ extern unsigned long wall_jiffies;
 DEFINE_SPINLOCK(rtc_lock);
 EXPORT_SYMBOL(rtc_lock);
 
-struct timer_opts *cur_timer __read_mostly = &timer_none;
+/* XXX - necessary to keep things compiling. to be removed later */
+u32 pmtmr_ioport;
 
 /*
  * This is a special lock that is owned by the CPU and holds the index
@@ -113,99 +114,19 @@ void rtc_cmos_write(unsigned char val, unsigned char addr)
 }
 EXPORT_SYMBOL(rtc_cmos_write);
 
-/*
- * This version of gettimeofday has microsecond resolution
- * and better than microsecond precision on fast x86 machines with TSC.
- */
-void do_gettimeofday(struct timeval *tv)
-{
-	unsigned long seq;
-	unsigned long usec, sec;
-	unsigned long max_ntp_tick;
-
-	do {
-		unsigned long lost;
-
-		seq = read_seqbegin(&xtime_lock);
-
-		usec = cur_timer->get_offset();
-		lost = jiffies - wall_jiffies;
-
-		/*
-		 * If time_adjust is negative then NTP is slowing the clock
-		 * so make sure not to go into next possible interval.
-		 * Better to lose some accuracy than have time go backwards..
-		 */
-		if (unlikely(time_adjust < 0)) {
-			max_ntp_tick = (USEC_PER_SEC / HZ) - tickadj;
-			usec = min(usec, max_ntp_tick);
-
-			if (lost)
-				usec += lost * max_ntp_tick;
-		}
-		else if (unlikely(lost))
-			usec += lost * (USEC_PER_SEC / HZ);
-
-		sec = xtime.tv_sec;
-		usec += (xtime.tv_nsec / 1000);
-	} while (read_seqretry(&xtime_lock, seq));
-
-	while (usec >= 1000000) {
-		usec -= 1000000;
-		sec++;
-	}
-
-	tv->tv_sec = sec;
-	tv->tv_usec = usec;
-}
-
-EXPORT_SYMBOL(do_gettimeofday);
-
-int do_settimeofday(struct timespec *tv)
-{
-	time_t wtm_sec, sec = tv->tv_sec;
-	long wtm_nsec, nsec = tv->tv_nsec;
-
-	if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
-		return -EINVAL;
-
-	write_seqlock_irq(&xtime_lock);
-	/*
-	 * This is revolting. We need to set "xtime" correctly. However, the
-	 * value in this location is the value at the most recent update of
-	 * wall time.  Discover what correction gettimeofday() would have
-	 * made, and then undo it!
-	 */
-	nsec -= cur_timer->get_offset() * NSEC_PER_USEC;
-	nsec -= (jiffies - wall_jiffies) * TICK_NSEC;
-
-	wtm_sec  = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
-	wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec);
-
-	set_normalized_timespec(&xtime, sec, nsec);
-	set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
-
-	ntp_clear();
-	write_sequnlock_irq(&xtime_lock);
-	clock_was_set();
-	return 0;
-}
-
-EXPORT_SYMBOL(do_settimeofday);
-
 static int set_rtc_mmss(unsigned long nowtime)
 {
 	int retval;
-
-	WARN_ON(irqs_disabled());
+	unsigned long flags;
 
 	/* gets recalled with irq locally disabled */
-	spin_lock_irq(&rtc_lock);
+	/* XXX - does irqsave resolve this? -johnstul */
+	spin_lock_irqsave(&rtc_lock, flags);
 	if (efi_enabled)
 		retval = efi_set_rtc_mmss(nowtime);
 	else
 		retval = mach_set_rtc_mmss(nowtime);
-	spin_unlock_irq(&rtc_lock);
+	spin_unlock_irqrestore(&rtc_lock, flags);
 
 	return retval;
 }
@@ -213,16 +134,6 @@ static int set_rtc_mmss(unsigned long nowtime)
 
 int timer_ack;
 
-/* monotonic_clock(): returns # of nanoseconds passed since time_init()
- *		Note: This function is required to return accurate
- *		time even in the absence of multiple timer ticks.
- */
-unsigned long long monotonic_clock(void)
-{
-	return cur_timer->monotonic_clock();
-}
-EXPORT_SYMBOL(monotonic_clock);
-
 #if defined(CONFIG_SMP) && defined(CONFIG_FRAME_POINTER)
 unsigned long profile_pc(struct pt_regs *regs)
 {
@@ -237,11 +148,21 @@ EXPORT_SYMBOL(profile_pc);
 #endif
 
 /*
- * timer_interrupt() needs to keep up the real-time clock,
- * as well as call the "do_timer()" routine every clocktick
+ * This is the same as the above, except we _also_ save the current
+ * Time Stamp Counter value at the time of the timer interrupt, so that
+ * we later on can estimate the time of day more exactly.
  */
-static inline void do_timer_interrupt(int irq, struct pt_regs *regs)
+irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 {
+	/*
+	 * Here we are in the timer irq handler. We just have irqs locally
+	 * disabled but we don't know if the timer_bh is running on the other
+	 * CPU. We need to avoid to SMP race with it. NOTE: we don' t need
+	 * the irq version of write_lock because as just said we have irq
+	 * locally disabled. -arca
+	 */
+	write_seqlock(&xtime_lock);
+
 #ifdef CONFIG_X86_IO_APIC
 	if (timer_ack) {
 		/*
@@ -274,27 +195,6 @@ static inline void do_timer_interrupt(int irq, struct pt_regs *regs)
 		irq = inb_p( 0x61 );	/* read the current state */
 		outb_p( irq|0x80, 0x61 );	/* reset the IRQ */
 	}
-}
-
-/*
- * This is the same as the above, except we _also_ save the current
- * Time Stamp Counter value at the time of the timer interrupt, so that
- * we later on can estimate the time of day more exactly.
- */
-irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
-{
-	/*
-	 * Here we are in the timer irq handler. We just have irqs locally
-	 * disabled but we don't know if the timer_bh is running on the other
-	 * CPU. We need to avoid to SMP race with it. NOTE: we don' t need
-	 * the irq version of write_lock because as just said we have irq
-	 * locally disabled. -arca
-	 */
-	write_seqlock(&xtime_lock);
-
-	cur_timer->mark_offset();
- 
-	do_timer_interrupt(irq, regs);
 
 	write_sequnlock(&xtime_lock);
 
@@ -375,7 +275,6 @@ void notify_arch_cmos_timer(void)
 
 static long clock_cmos_diff, sleep_start;
 
-static struct timer_opts *last_timer;
 static int timer_suspend(struct sys_device *dev, pm_message_t state)
 {
 	/*
@@ -384,10 +283,6 @@ static int timer_suspend(struct sys_device *dev, pm_message_t state)
 	clock_cmos_diff = -get_cmos_time();
 	clock_cmos_diff += get_seconds();
 	sleep_start = get_cmos_time();
-	last_timer = cur_timer;
-	cur_timer = &timer_none;
-	if (last_timer->suspend)
-		last_timer->suspend(state);
 	return 0;
 }
 
@@ -410,10 +305,6 @@ static int timer_resume(struct sys_device *dev)
 	jiffies_64 += sleep_length;
 	wall_jiffies += sleep_length;
 	write_sequnlock_irqrestore(&xtime_lock, flags);
-	if (last_timer->resume)
-		last_timer->resume();
-	cur_timer = last_timer;
-	last_timer = NULL;
 	touch_softlockup_watchdog();
 	return 0;
 }
@@ -455,9 +346,6 @@ static void __init hpet_time_init(void)
 		printk("Using HPET for base-timer\n");
 	}
 
-	cur_timer = select_timer();
-	printk(KERN_INFO "Using %s for high-res timesource\n",cur_timer->name);
-
 	time_init_hook();
 }
 #endif
@@ -479,8 +367,5 @@ void __init time_init(void)
 	set_normalized_timespec(&wall_to_monotonic,
 		-xtime.tv_sec, -xtime.tv_nsec);
 
-	cur_timer = select_timer();
-	printk(KERN_INFO "Using %s for high-res timesource\n",cur_timer->name);
-
 	time_init_hook();
 }