diff options
Diffstat (limited to 'Documentation')
3 files changed, 52 insertions, 30 deletions
diff --git a/Documentation/networking/device_drivers/ethernet/pensando/ionic.rst b/Documentation/networking/device_drivers/ethernet/pensando/ionic.rst index 6ec7d686efab0..05fe2b11bb188 100644 --- a/Documentation/networking/device_drivers/ethernet/pensando/ionic.rst +++ b/Documentation/networking/device_drivers/ethernet/pensando/ionic.rst @@ -99,6 +99,12 @@ Minimal SR-IOV support is currently offered and can be enabled by setting the sysfs 'sriov_numvfs' value, if supported by your particular firmware configuration. +XDP +--- + +Support for XDP includes the basics, plus Jumbo frames, Redirect and +ndo_xmit. There is no current support for zero-copy sockets or HW offload. + Statistics ========== @@ -138,6 +144,12 @@ Driver port specific:: rx_csum_none: 0 rx_csum_complete: 3 rx_csum_error: 0 + xdp_drop: 0 + xdp_aborted: 0 + xdp_pass: 0 + xdp_tx: 0 + xdp_redirect: 0 + xdp_frames: 0 Driver queue specific:: @@ -149,9 +161,12 @@ Driver queue specific:: tx_0_frags: 0 tx_0_tso: 0 tx_0_tso_bytes: 0 + tx_0_hwstamp_valid: 0 + tx_0_hwstamp_invalid: 0 tx_0_csum_none: 3 tx_0_csum: 0 tx_0_vlan_inserted: 0 + tx_0_xdp_frames: 0 rx_0_pkts: 2 rx_0_bytes: 120 rx_0_dma_map_err: 0 @@ -159,8 +174,15 @@ Driver queue specific:: rx_0_csum_none: 0 rx_0_csum_complete: 0 rx_0_csum_error: 0 + rx_0_hwstamp_valid: 0 + rx_0_hwstamp_invalid: 0 rx_0_dropped: 0 rx_0_vlan_stripped: 0 + rx_0_xdp_drop: 0 + rx_0_xdp_aborted: 0 + rx_0_xdp_pass: 0 + rx_0_xdp_tx: 0 + rx_0_xdp_redirect: 0 Firmware port specific:: diff --git a/Documentation/networking/multi-pf-netdev.rst b/Documentation/networking/multi-pf-netdev.rst index be8e4bcadf119..268819225866c 100644 --- a/Documentation/networking/multi-pf-netdev.rst +++ b/Documentation/networking/multi-pf-netdev.rst @@ -87,35 +87,35 @@ all using the same instance under "priv->mdev". Observability ============= -The relation between PF, irq, napi, and queue can be observed via netlink spec: - -$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml --dump queue-get --json='{"ifindex": 13}' -[{'id': 0, 'ifindex': 13, 'napi-id': 539, 'type': 'rx'}, - {'id': 1, 'ifindex': 13, 'napi-id': 540, 'type': 'rx'}, - {'id': 2, 'ifindex': 13, 'napi-id': 541, 'type': 'rx'}, - {'id': 3, 'ifindex': 13, 'napi-id': 542, 'type': 'rx'}, - {'id': 4, 'ifindex': 13, 'napi-id': 543, 'type': 'rx'}, - {'id': 0, 'ifindex': 13, 'napi-id': 539, 'type': 'tx'}, - {'id': 1, 'ifindex': 13, 'napi-id': 540, 'type': 'tx'}, - {'id': 2, 'ifindex': 13, 'napi-id': 541, 'type': 'tx'}, - {'id': 3, 'ifindex': 13, 'napi-id': 542, 'type': 'tx'}, - {'id': 4, 'ifindex': 13, 'napi-id': 543, 'type': 'tx'}] - -$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml --dump napi-get --json='{"ifindex": 13}' -[{'id': 543, 'ifindex': 13, 'irq': 42}, - {'id': 542, 'ifindex': 13, 'irq': 41}, - {'id': 541, 'ifindex': 13, 'irq': 40}, - {'id': 540, 'ifindex': 13, 'irq': 39}, - {'id': 539, 'ifindex': 13, 'irq': 36}] - -Here you can clearly observe our channels distribution policy: - -$ ls /proc/irq/{36,39,40,41,42}/mlx5* -d -1 -/proc/irq/36/mlx5_comp1@pci:0000:08:00.0 -/proc/irq/39/mlx5_comp1@pci:0000:09:00.0 -/proc/irq/40/mlx5_comp2@pci:0000:08:00.0 -/proc/irq/41/mlx5_comp2@pci:0000:09:00.0 -/proc/irq/42/mlx5_comp3@pci:0000:08:00.0 +The relation between PF, irq, napi, and queue can be observed via netlink spec:: + + $ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml --dump queue-get --json='{"ifindex": 13}' + [{'id': 0, 'ifindex': 13, 'napi-id': 539, 'type': 'rx'}, + {'id': 1, 'ifindex': 13, 'napi-id': 540, 'type': 'rx'}, + {'id': 2, 'ifindex': 13, 'napi-id': 541, 'type': 'rx'}, + {'id': 3, 'ifindex': 13, 'napi-id': 542, 'type': 'rx'}, + {'id': 4, 'ifindex': 13, 'napi-id': 543, 'type': 'rx'}, + {'id': 0, 'ifindex': 13, 'napi-id': 539, 'type': 'tx'}, + {'id': 1, 'ifindex': 13, 'napi-id': 540, 'type': 'tx'}, + {'id': 2, 'ifindex': 13, 'napi-id': 541, 'type': 'tx'}, + {'id': 3, 'ifindex': 13, 'napi-id': 542, 'type': 'tx'}, + {'id': 4, 'ifindex': 13, 'napi-id': 543, 'type': 'tx'}] + + $ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml --dump napi-get --json='{"ifindex": 13}' + [{'id': 543, 'ifindex': 13, 'irq': 42}, + {'id': 542, 'ifindex': 13, 'irq': 41}, + {'id': 541, 'ifindex': 13, 'irq': 40}, + {'id': 540, 'ifindex': 13, 'irq': 39}, + {'id': 539, 'ifindex': 13, 'irq': 36}] + +Here you can clearly observe our channels distribution policy:: + + $ ls /proc/irq/{36,39,40,41,42}/mlx5* -d -1 + /proc/irq/36/mlx5_comp1@pci:0000:08:00.0 + /proc/irq/39/mlx5_comp1@pci:0000:09:00.0 + /proc/irq/40/mlx5_comp2@pci:0000:08:00.0 + /proc/irq/41/mlx5_comp2@pci:0000:09:00.0 + /proc/irq/42/mlx5_comp3@pci:0000:08:00.0 Steering ======== diff --git a/Documentation/networking/net_cachelines/net_device.rst b/Documentation/networking/net_cachelines/net_device.rst index dceb49d56a911..70c4fb9d4e5ce 100644 --- a/Documentation/networking/net_cachelines/net_device.rst +++ b/Documentation/networking/net_cachelines/net_device.rst @@ -13,7 +13,7 @@ struct_dev_ifalias* ifalias unsigned_long mem_end unsigned_long mem_start unsigned_long base_addr -unsigned_long state +unsigned_long state read_mostly read_mostly netif_running(dev) struct_list_head dev_list struct_list_head napi_list struct_list_head unreg_list |