diff options
| -rw-r--r-- | arch/arm/mach-ixp2000/core.c | 85 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-ixp2000.c | 3 | ||||
| -rw-r--r-- | include/asm-arm/arch-ixp2000/gpio.h | 31 | ||||
| -rw-r--r-- | include/asm-arm/arch-ixp2000/platform.h | 22 |
4 files changed, 82 insertions, 59 deletions
diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c index fc0555596d6d70..0ee34acb8d7b80 100644 --- a/arch/arm/mach-ixp2000/core.c +++ b/arch/arm/mach-ixp2000/core.c @@ -40,6 +40,8 @@ #include <asm/mach/time.h> #include <asm/mach/irq.h> +#include <asm/arch/gpio.h> + static DEFINE_SPINLOCK(ixp2000_slowport_lock); static unsigned long ixp2000_slowport_irq_flags; @@ -179,7 +181,7 @@ static int ixp2000_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) /* clear timer 1 */ ixp2000_reg_write(IXP2000_T1_CLR, 1); - + while ((next_jiffy_time - *missing_jiffy_timer_csr) > ticks_per_jiffy) { timer_tick(regs); next_jiffy_time -= ticks_per_jiffy; @@ -238,35 +240,40 @@ void __init ixp2000_init_time(unsigned long tick_rate) /************************************************************************* * GPIO helpers *************************************************************************/ -static unsigned long GPIO_IRQ_rising_edge; static unsigned long GPIO_IRQ_falling_edge; +static unsigned long GPIO_IRQ_rising_edge; static unsigned long GPIO_IRQ_level_low; static unsigned long GPIO_IRQ_level_high; -void gpio_line_config(int line, int style) +static void update_gpio_int_csrs(void) +{ + ixp2000_reg_write(IXP2000_GPIO_FEDR, GPIO_IRQ_falling_edge); + ixp2000_reg_write(IXP2000_GPIO_REDR, GPIO_IRQ_rising_edge); + ixp2000_reg_write(IXP2000_GPIO_LSLR, GPIO_IRQ_level_low); + ixp2000_reg_write(IXP2000_GPIO_LSHR, GPIO_IRQ_level_high); +} + +void gpio_line_config(int line, int direction) { unsigned long flags; local_irq_save(flags); + if (direction == GPIO_OUT) { + irq_desc[line + IRQ_IXP2000_GPIO0].valid = 0; - if(style == GPIO_OUT) { /* if it's an output, it ain't an interrupt anymore */ - ixp2000_reg_write(IXP2000_GPIO_PDSR, (1 << line)); GPIO_IRQ_falling_edge &= ~(1 << line); GPIO_IRQ_rising_edge &= ~(1 << line); GPIO_IRQ_level_low &= ~(1 << line); GPIO_IRQ_level_high &= ~(1 << line); - ixp2000_reg_write(IXP2000_GPIO_FEDR, GPIO_IRQ_falling_edge); - ixp2000_reg_write(IXP2000_GPIO_REDR, GPIO_IRQ_rising_edge); - ixp2000_reg_write(IXP2000_GPIO_LSHR, GPIO_IRQ_level_high); - ixp2000_reg_write(IXP2000_GPIO_LSLR, GPIO_IRQ_level_low); - irq_desc[line+IRQ_IXP2000_GPIO0].valid = 0; - } else if(style == GPIO_IN) { - ixp2000_reg_write(IXP2000_GPIO_PDCR, (1 << line)); + update_gpio_int_csrs(); + + ixp2000_reg_write(IXP2000_GPIO_PDSR, 1 << line); + } else if (direction == GPIO_IN) { + ixp2000_reg_write(IXP2000_GPIO_PDCR, 1 << line); } - local_irq_restore(flags); -} +} /************************************************************************* @@ -285,9 +292,50 @@ static void ixp2000_GPIO_irq_handler(unsigned int irq, struct irqdesc *desc, str } } +static int ixp2000_GPIO_irq_type(unsigned int irq, unsigned int type) +{ + int line = irq - IRQ_IXP2000_GPIO0; + + /* + * First, configure this GPIO line as an input. + */ + ixp2000_reg_write(IXP2000_GPIO_PDCR, 1 << line); + + /* + * Then, set the proper trigger type. + */ + if (type & IRQT_FALLING) + GPIO_IRQ_falling_edge |= 1 << line; + else + GPIO_IRQ_falling_edge &= ~(1 << line); + if (type & IRQT_RISING) + GPIO_IRQ_rising_edge |= 1 << line; + else + GPIO_IRQ_rising_edge &= ~(1 << line); + if (type & IRQT_LOW) + GPIO_IRQ_level_low |= 1 << line; + else + GPIO_IRQ_level_low &= ~(1 << line); + if (type & IRQT_HIGH) + GPIO_IRQ_level_high |= 1 << line; + else + GPIO_IRQ_level_high &= ~(1 << line); + update_gpio_int_csrs(); + + /* + * Finally, mark the corresponding IRQ as valid. + */ + irq_desc[irq].valid = 1; + + return 0; +} + static void ixp2000_GPIO_irq_mask_ack(unsigned int irq) { ixp2000_reg_write(IXP2000_GPIO_INCR, (1 << (irq - IRQ_IXP2000_GPIO0))); + + ixp2000_reg_write(IXP2000_GPIO_EDSR, (1 << (irq - IRQ_IXP2000_GPIO0))); + ixp2000_reg_write(IXP2000_GPIO_LDSR, (1 << (irq - IRQ_IXP2000_GPIO0))); ixp2000_reg_write(IXP2000_GPIO_INST, (1 << (irq - IRQ_IXP2000_GPIO0))); } @@ -302,6 +350,7 @@ static void ixp2000_GPIO_irq_unmask(unsigned int irq) } static struct irqchip ixp2000_GPIO_irq_chip = { + .type = ixp2000_GPIO_irq_type, .ack = ixp2000_GPIO_irq_mask_ack, .mask = ixp2000_GPIO_irq_mask, .unmask = ixp2000_GPIO_irq_unmask @@ -338,7 +387,7 @@ static void ixp2000_irq_mask(unsigned int irq) static void ixp2000_irq_unmask(unsigned int irq) { - ixp2000_reg_write(IXP2000_IRQ_ENABLE_SET, (1 << irq)); + ixp2000_reg_write(IXP2000_IRQ_ENABLE_SET, (1 << irq)); } static struct irqchip ixp2000_irq_chip = { @@ -375,16 +424,16 @@ void __init ixp2000_init_irq(void) * our mask/unmask code much simpler. */ for (irq = IRQ_IXP2000_SOFT_INT; irq <= IRQ_IXP2000_THDB3; irq++) { - if((1 << irq) & IXP2000_VALID_IRQ_MASK) { + if ((1 << irq) & IXP2000_VALID_IRQ_MASK) { set_irq_chip(irq, &ixp2000_irq_chip); set_irq_handler(irq, do_level_IRQ); set_irq_flags(irq, IRQF_VALID); } else set_irq_flags(irq, 0); } - + /* * GPIO IRQs are invalid until someone sets the interrupt mode - * by calling gpio_line_set(); + * by calling set_irq_type(). */ for (irq = IRQ_IXP2000_GPIO0; irq <= IRQ_IXP2000_GPIO7; irq++) { set_irq_chip(irq, &ixp2000_GPIO_irq_chip); diff --git a/drivers/i2c/busses/i2c-ixp2000.c b/drivers/i2c/busses/i2c-ixp2000.c index ec943cad231475..1956af382cd896 100644 --- a/drivers/i2c/busses/i2c-ixp2000.c +++ b/drivers/i2c/busses/i2c-ixp2000.c @@ -33,7 +33,8 @@ #include <linux/i2c.h> #include <linux/i2c-algo-bit.h> -#include <asm/hardware.h> /* Pick up IXP42000-specific bits */ +#include <asm/hardware.h> /* Pick up IXP2000-specific bits */ +#include <asm/arch/gpio.h> static inline int ixp2000_scl_pin(void *data) { diff --git a/include/asm-arm/arch-ixp2000/gpio.h b/include/asm-arm/arch-ixp2000/gpio.h index 84634af5cc644f..03cbbe1fd9d8fe 100644 --- a/include/asm-arm/arch-ixp2000/gpio.h +++ b/include/asm-arm/arch-ixp2000/gpio.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/arch-ixp2000/ixp2000-gpio.h + * include/asm-arm/arch-ixp2000/gpio.h * * Copyright (C) 2002 Intel Corporation. * @@ -16,26 +16,18 @@ * Use this instead of directly setting the GPIO registers. * GPIOs may also be used as GPIOs (e.g. for emulating i2c/smb) */ -#ifndef _ASM_ARCH_IXP2000_GPIO_H_ -#define _ASM_ARCH_IXP2000_GPIO_H_ +#ifndef __ASM_ARCH_GPIO_H +#define __ASM_ARCH_GPIO_H #ifndef __ASSEMBLY__ -#define GPIO_OUT 0x0 -#define GPIO_IN 0x80 + +#define GPIO_IN 0 +#define GPIO_OUT 1 #define IXP2000_GPIO_LOW 0 #define IXP2000_GPIO_HIGH 1 -#define GPIO_NO_EDGES 0 -#define GPIO_FALLING_EDGE 1 -#define GPIO_RISING_EDGE 2 -#define GPIO_BOTH_EDGES 3 -#define GPIO_LEVEL_LOW 4 -#define GPIO_LEVEL_HIGH 8 - -extern void set_GPIO_IRQ_edge(int gpio_nr, int edge); -extern void set_GPIO_IRQ_level(int gpio_nr, int level); -extern void gpio_line_config(int line, int style); +extern void gpio_line_config(int line, int direction); static inline int gpio_line_get(int line) { @@ -45,11 +37,12 @@ static inline int gpio_line_get(int line) static inline void gpio_line_set(int line, int value) { if (value == IXP2000_GPIO_HIGH) { - ixp_reg_write(IXP2000_GPIO_POSR, BIT(line)); - } else if (value == IXP2000_GPIO_LOW) - ixp_reg_write(IXP2000_GPIO_POCR, BIT(line)); + ixp2000_reg_write(IXP2000_GPIO_POSR, 1 << line); + } else if (value == IXP2000_GPIO_LOW) { + ixp2000_reg_write(IXP2000_GPIO_POCR, 1 << line); + } } #endif /* !__ASSEMBLY__ */ -#endif /* ASM_ARCH_IXP2000_GPIO_H_ */ +#endif /* ASM_ARCH_IXP2000_GPIO_H_ */ diff --git a/include/asm-arm/arch-ixp2000/platform.h b/include/asm-arm/arch-ixp2000/platform.h index 901bba6d02b47b..52ded516ea5cae 100644 --- a/include/asm-arm/arch-ixp2000/platform.h +++ b/include/asm-arm/arch-ixp2000/platform.h @@ -138,30 +138,10 @@ struct ixp2000_flash_data { unsigned long (*bank_setup)(unsigned long); }; -/* - * GPIO helper functions - */ -#define GPIO_IN 0 -#define GPIO_OUT 1 - -extern void gpio_line_config(int line, int style); - -static inline int gpio_line_get(int line) -{ - return (((*IXP2000_GPIO_PLR) >> line) & 1); -} - -static inline void gpio_line_set(int line, int value) -{ - if (value) - ixp2000_reg_write(IXP2000_GPIO_POSR, (1 << line)); - else - ixp2000_reg_write(IXP2000_GPIO_POCR, (1 << line)); -} - struct ixp2000_i2c_pins { unsigned long sda_pin; unsigned long scl_pin; }; + #endif /* !__ASSEMBLY__ */ |