diff options
| -rw-r--r-- | Documentation/i2c/busses/i2c-viapro | 7 | ||||
| -rw-r--r-- | drivers/i2c/busses/Kconfig | 18 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-viapro.c | 8 |
3 files changed, 23 insertions, 10 deletions
diff --git a/Documentation/i2c/busses/i2c-viapro b/Documentation/i2c/busses/i2c-viapro index 16775663b9f5a..25680346e0acd 100644 --- a/Documentation/i2c/busses/i2c-viapro +++ b/Documentation/i2c/busses/i2c-viapro @@ -7,9 +7,12 @@ Supported adapters: * VIA Technologies, Inc. VT82C686A/B Datasheet: Sometimes available at the VIA website - * VIA Technologies, Inc. VT8231, VT8233, VT8233A, VT8235, VT8237R + * VIA Technologies, Inc. VT8231, VT8233, VT8233A Datasheet: available on request from VIA + * VIA Technologies, Inc. VT8235, VT8237R, VT8237A, VT8251 + Datasheet: available on request and under NDA from VIA + Authors: Kyösti Mälkki <kmalkki@cc.hut.fi>, Mark D. Studebaker <mdsxyz123@yahoo.com>, @@ -39,6 +42,8 @@ Your lspci -n listing must show one of these : device 1106:8235 (VT8231 function 4) device 1106:3177 (VT8235) device 1106:3227 (VT8237R) + device 1106:3337 (VT8237A) + device 1106:3287 (VT8251) If none of these show up, you should look in the BIOS for settings like enable ACPI / SMBus or even USB. diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 1df3bd97cb158..9e56c3989d680 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -492,19 +492,19 @@ config I2C_VIA will be called i2c-via. config I2C_VIAPRO - tristate "VIA 82C596/82C686/823x" + tristate "VIA 82C596/82C686/82xx" depends on I2C && PCI help If you say yes to this option, support will be included for the VIA - 82C596/82C686/823x I2C interfaces. Specifically, the following + 82C596/82C686/82xx I2C interfaces. Specifically, the following chipsets are supported: - 82C596A/B - 82C686A/B - 8231 - 8233 - 8233A - 8235 - 8237 + VT82C596A/B + VT82C686A/B + VT8231 + VT8233/A + VT8235 + VT8237R/A + VT8251 This driver can also be built as a module. If so, the module will be called i2c-viapro. diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c index 47e52bf2c5ec8..1ccc0fbc59472 100644 --- a/drivers/i2c/busses/i2c-viapro.c +++ b/drivers/i2c/busses/i2c-viapro.c @@ -34,6 +34,8 @@ VT8233A 0x3147 yes? VT8235 0x3177 yes VT8237R 0x3227 yes + VT8237A 0x3337 yes + VT8251 0x3287 yes Note: we assume there can only be one device, with one SMBus interface. */ @@ -381,7 +383,9 @@ found: dev_dbg(&pdev->dev, "VT596_smba = 0x%X\n", vt596_smba); switch (pdev->device) { + case PCI_DEVICE_ID_VIA_8251: case PCI_DEVICE_ID_VIA_8237: + case PCI_DEVICE_ID_VIA_8237A: case PCI_DEVICE_ID_VIA_8235: case PCI_DEVICE_ID_VIA_8233A: case PCI_DEVICE_ID_VIA_8233_0: @@ -432,8 +436,12 @@ static struct pci_device_id vt596_ids[] = { .driver_data = SMBBA3 }, { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237), .driver_data = SMBBA3 }, + { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237A), + .driver_data = SMBBA3 }, { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231_4), .driver_data = SMBBA1 }, + { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8251), + .driver_data = SMBBA3 }, { 0, } }; |