diff options
| -rw-r--r-- | arch/ppc/kernel/head_8xx.S | 77 |
1 files changed, 77 insertions, 0 deletions
diff --git a/arch/ppc/kernel/head_8xx.S b/arch/ppc/kernel/head_8xx.S index de0978742221ae..3e6ca7f5843ff4 100644 --- a/arch/ppc/kernel/head_8xx.S +++ b/arch/ppc/kernel/head_8xx.S @@ -375,6 +375,8 @@ DataStoreTLBMiss: lis r11, swapper_pg_dir@h ori r11, r11, swapper_pg_dir@l rlwimi r10, r11, 0, 2, 19 + stw r12, 16(r0) + b LoadLargeDTLB 3: lwz r11, 0(r10) /* Get the level 1 entry */ rlwinm. r10, r11,0,0,19 /* Extract page descriptor page address */ @@ -430,6 +432,81 @@ DataStoreTLBMiss: InstructionTLBError: b InstructionAccess +LoadLargeDTLB: + li r12, 0 + lwz r11, 0(r10) /* Get the level 1 entry */ + rlwinm. r10, r11,0,0,19 /* Extract page descriptor page address */ + beq 3f /* If zero, don't try to find a pte */ + + /* We have a pte table, so load fetch the pte from the table. + */ + ori r11, r11, 1 /* Set valid bit in physical L2 page */ + DO_8xx_CPU6(0x3b80, r3) + mtspr SPRN_MD_TWC, r11 /* Load pte table base address */ + mfspr r10, SPRN_MD_TWC /* ....and get the pte address */ + lwz r10, 0(r10) /* Get the pte */ + + /* Insert the Guarded flag into the TWC from the Linux PTE. + * It is bit 27 of both the Linux PTE and the TWC (at least + * I got that right :-). It will be better when we can put + * this into the Linux pgd/pmd and load it in the operation + * above. + */ + rlwimi r11, r10, 0, 27, 27 + + rlwimi r12, r10, 0, 0, 9 /* extract phys. addr */ + mfspr r3, SPRN_MD_EPN + rlwinm r3, r3, 0, 0, 9 /* extract virtual address */ + tophys(r3, r3) + cmpw r3, r12 /* only use 8M page if it is a direct + kernel mapping */ + bne 1f + ori r11, r11, MD_PS8MEG + li r12, 1 + b 2f +1: + li r12, 0 /* can't use 8MB TLB, so zero r12. */ +2: + DO_8xx_CPU6(0x3b80, r3) + mtspr SPRN_MD_TWC, r11 + + /* The Linux PTE won't go exactly into the MMU TLB. + * Software indicator bits 21, 22 and 28 must be clear. + * Software indicator bits 24, 25, 26, and 27 must be + * set. All other Linux PTE bits control the behavior + * of the MMU. + */ +3: li r11, 0x00f0 + rlwimi r10, r11, 0, 24, 28 /* Set 24-27, clear 28 */ + cmpwi r12, 1 + bne 4f + ori r10, r10, 0x8 + + mfspr r12, SPRN_MD_EPN + lis r3, 0xff80 /* 10-19 must be clear for 8MB TLB */ + ori r3, r3, 0x0fff + and r12, r3, r12 + DO_8xx_CPU6(0x3780, r3) + mtspr SPRN_MD_EPN, r12 + + lis r3, 0xff80 /* 10-19 must be clear for 8MB TLB */ + ori r3, r3, 0x0fff + and r10, r3, r10 +4: + DO_8xx_CPU6(0x3d80, r3) + mtspr SPRN_MD_RPN, r10 /* Update TLB entry */ + + mfspr r10, SPRN_M_TW /* Restore registers */ + lwz r11, 0(r0) + mtcr r11 + lwz r11, 4(r0) + + lwz r12, 16(r0) +#ifdef CONFIG_8xx_CPU6 + lwz r3, 8(r0) +#endif + rfi + /* This is the data TLB error on the MPC8xx. This could be due to * many reasons, including a dirty update to a pte. We can catch that * one here, but anything else is an error. First, we track down the |