diff options
| -rw-r--r-- | Documentation/ABI/testing/debugfs-cxl | 30 | ||||
| -rw-r--r-- | drivers/cxl/core/port.c | 41 |
2 files changed, 71 insertions, 0 deletions
diff --git a/Documentation/ABI/testing/debugfs-cxl b/Documentation/ABI/testing/debugfs-cxl index fe61d372e3fac9..4c0f62f881ca4b 100644 --- a/Documentation/ABI/testing/debugfs-cxl +++ b/Documentation/ABI/testing/debugfs-cxl @@ -33,3 +33,33 @@ Description: device cannot clear poison from the address, -ENXIO is returned. The clear_poison attribute is only visible for devices supporting the capability. + +What: /sys/kernel/debug/cxl/einj_types +Date: January, 2024 +KernelVersion: v6.9 +Contact: linux-cxl@vger.kernel.org +Description: + (RO) Prints the CXL protocol error types made available by + the platform in the format "0x<error number> <error type>". + The possible error types are (as of ACPI v6.5): + 0x1000 CXL.cache Protocol Correctable + 0x2000 CXL.cache Protocol Uncorrectable non-fatal + 0x4000 CXL.cache Protocol Uncorrectable fatal + 0x8000 CXL.mem Protocol Correctable + 0x10000 CXL.mem Protocol Uncorrectable non-fatal + 0x20000 CXL.mem Protocol Uncorrectable fatal + + The <error number> can be written to einj_inject to inject + <error type> into a chosen dport. + +What: /sys/kernel/debug/cxl/$dport_dev/einj_inject +Date: January, 2024 +KernelVersion: v6.9 +Contact: linux-cxl@vger.kernel.org +Description: + (WO) Writing an integer to this file injects the corresponding + CXL protocol error into $dport_dev ($dport_dev will be a device + name from /sys/bus/pci/devices). The integer to type mapping for + injection can be found by reading from einj_types. If the dport + was enumerated in RCH mode, a CXL 1.1 error is injected, otherwise + a CXL 2.0 error is injected. diff --git a/drivers/cxl/core/port.c b/drivers/cxl/core/port.c index e59d9d37aa6500..01e64b83a78c70 100644 --- a/drivers/cxl/core/port.c +++ b/drivers/cxl/core/port.c @@ -3,6 +3,7 @@ #include <linux/platform_device.h> #include <linux/memregion.h> #include <linux/workqueue.h> +#include <linux/einj-cxl.h> #include <linux/debugfs.h> #include <linux/device.h> #include <linux/module.h> @@ -793,6 +794,40 @@ static int cxl_dport_setup_regs(struct device *host, struct cxl_dport *dport, return rc; } +DEFINE_SHOW_ATTRIBUTE(einj_cxl_available_error_type); + +static int cxl_einj_inject(void *data, u64 type) +{ + struct cxl_dport *dport = data; + + if (dport->rch) + return einj_cxl_inject_rch_error(dport->rcrb.base, type); + + return einj_cxl_inject_error(to_pci_dev(dport->dport_dev), type); +} +DEFINE_DEBUGFS_ATTRIBUTE(cxl_einj_inject_fops, NULL, cxl_einj_inject, + "0x%llx\n"); + +static void cxl_debugfs_create_dport_dir(struct cxl_dport *dport) +{ + struct dentry *dir; + + if (!einj_cxl_is_initialized()) + return; + + /* + * dport_dev needs to be a PCIe port for CXL 2.0+ ports because + * EINJ expects a dport SBDF to be specified for 2.0 error injection. + */ + if (!dport->rch && !dev_is_pci(dport->dport_dev)) + return; + + dir = cxl_debugfs_create_dir(dev_name(dport->dport_dev)); + + debugfs_create_file("einj_inject", 0200, dir, dport, + &cxl_einj_inject_fops); +} + static struct cxl_port *__devm_cxl_add_port(struct device *host, struct device *uport_dev, resource_size_t component_reg_phys, @@ -1149,6 +1184,8 @@ __devm_cxl_add_dport(struct cxl_port *port, struct device *dport_dev, if (dev_is_pci(dport_dev)) dport->link_latency = cxl_pci_get_latency(to_pci_dev(dport_dev)); + cxl_debugfs_create_dport_dir(dport); + return dport; } @@ -2221,6 +2258,10 @@ static __init int cxl_core_init(void) cxl_debugfs = debugfs_create_dir("cxl", NULL); + if (einj_cxl_is_initialized()) + debugfs_create_file("einj_types", 0400, cxl_debugfs, NULL, + &einj_cxl_available_error_type_fops); + cxl_mbox_init(); rc = cxl_memdev_init(); |