diff options
1042 files changed, 45286 insertions, 7328 deletions
diff --git a/Documentation/CodingStyle b/Documentation/CodingStyle index afc2867758914e..b49b92edb39683 100644 --- a/Documentation/CodingStyle +++ b/Documentation/CodingStyle @@ -495,29 +495,40 @@ re-formatting you may want to take a look at the man page. But remember: "indent" is not a fix for bad programming. - Chapter 10: Configuration-files + Chapter 10: Kconfig configuration files -For configuration options (arch/xxx/Kconfig, and all the Kconfig files), -somewhat different indentation is used. +For all of the Kconfig* configuration files throughout the source tree, +the indentation is somewhat different. Lines under a "config" definition +are indented with one tab, while help text is indented an additional two +spaces. Example: -Help text is indented with 2 spaces. - -if CONFIG_EXPERIMENTAL - tristate CONFIG_BOOM - default n - help - Apply nitroglycerine inside the keyboard (DANGEROUS) - bool CONFIG_CHEER - depends on CONFIG_BOOM - default y +config AUDIT + bool "Auditing support" + depends on NET help - Output nice messages when you explode -endif + Enable auditing infrastructure that can be used with another + kernel subsystem, such as SELinux (which requires this for + logging of avc messages output). Does not do system-call + auditing without CONFIG_AUDITSYSCALL. + +Features that might still be considered unstable should be defined as +dependent on "EXPERIMENTAL": + +config SLUB + depends on EXPERIMENTAL && !ARCH_USES_SLAB_PAGE_STRUCT + bool "SLUB (Unqueued Allocator)" + ... + +while seriously dangerous features (such as write support for certain +filesystems) should advertise this prominently in their prompt string: + +config ADFS_FS_RW + bool "ADFS write support (DANGEROUS)" + depends on ADFS_FS + ... -Generally, CONFIG_EXPERIMENTAL should surround all options not considered -stable. All options that are known to trash data (experimental write- -support for file-systems, for instance) should be denoted (DANGEROUS), other -experimental options should be denoted (EXPERIMENTAL). +For full documentation on the configuration files, see the file +Documentation/kbuild/kconfig-language.txt. Chapter 11: Data structures diff --git a/Documentation/DocBook/gadget.tmpl b/Documentation/DocBook/gadget.tmpl index e7fc9643340864..6996d977bf8fe0 100644 --- a/Documentation/DocBook/gadget.tmpl +++ b/Documentation/DocBook/gadget.tmpl @@ -52,7 +52,7 @@ <toc></toc> -<chapter><title>Introduction</title> +<chapter id="intro"><title>Introduction</title> <para>This document presents a Linux-USB "Gadget" kernel mode diff --git a/Documentation/DocBook/kernel-locking.tmpl b/Documentation/DocBook/kernel-locking.tmpl index 644c3884fab94e..0a441f73261a32 100644 --- a/Documentation/DocBook/kernel-locking.tmpl +++ b/Documentation/DocBook/kernel-locking.tmpl @@ -551,10 +551,12 @@ <function>spin_lock_irqsave()</function>, which is a superset of all other spinlock primitives. </para> + <table> <title>Table of Locking Requirements</title> <tgroup cols="11"> <tbody> + <row> <entry></entry> <entry>IRQ Handler A</entry> @@ -576,97 +578,128 @@ <row> <entry>IRQ Handler B</entry> -<entry>spin_lock_irqsave</entry> +<entry>SLIS</entry> <entry>None</entry> </row> <row> <entry>Softirq A</entry> -<entry>spin_lock_irq</entry> -<entry>spin_lock_irq</entry> -<entry>spin_lock</entry> +<entry>SLI</entry> +<entry>SLI</entry> +<entry>SL</entry> </row> <row> <entry>Softirq B</entry> -<entry>spin_lock_irq</entry> -<entry>spin_lock_irq</entry> -<entry>spin_lock</entry> -<entry>spin_lock</entry> +<entry>SLI</entry> +<entry>SLI</entry> +<entry>SL</entry> +<entry>SL</entry> </row> <row> <entry>Tasklet A</entry> -<entry>spin_lock_irq</entry> -<entry>spin_lock_irq</entry> -<entry>spin_lock</entry> -<entry>spin_lock</entry> +<entry>SLI</entry> +<entry>SLI</entry> +<entry>SL</entry> +<entry>SL</entry> <entry>None</entry> </row> <row> <entry>Tasklet B</entry> -<entry>spin_lock_irq</entry> -<entry>spin_lock_irq</entry> -<entry>spin_lock</entry> -<entry>spin_lock</entry> -<entry>spin_lock</entry> +<entry>SLI</entry> +<entry>SLI</entry> +<entry>SL</entry> +<entry>SL</entry> +<entry>SL</entry> <entry>None</entry> </row> <row> <entry>Timer A</entry> -<entry>spin_lock_irq</entry> -<entry>spin_lock_irq</entry> -<entry>spin_lock</entry> -<entry>spin_lock</entry> -<entry>spin_lock</entry> -<entry>spin_lock</entry> +<entry>SLI</entry> +<entry>SLI</entry> +<entry>SL</entry> +<entry>SL</entry> +<entry>SL</entry> +<entry>SL</entry> <entry>None</entry> </row> <row> <entry>Timer B</entry> -<entry>spin_lock_irq</entry> -<entry>spin_lock_irq</entry> -<entry>spin_lock</entry> -<entry>spin_lock</entry> -<entry>spin_lock</entry> -<entry>spin_lock</entry> -<entry>spin_lock</entry> +<entry>SLI</entry> +<entry>SLI</entry> +<entry>SL</entry> +<entry>SL</entry> +<entry>SL</entry> +<entry>SL</entry> +<entry>SL</entry> <entry>None</entry> </row> <row> <entry>User Context A</entry> -<entry>spin_lock_irq</entry> -<entry>spin_lock_irq</entry> -<entry>spin_lock_bh</entry> -<entry>spin_lock_bh</entry> -<entry>spin_lock_bh</entry> -<entry>spin_lock_bh</entry> -<entry>spin_lock_bh</entry> -<entry>spin_lock_bh</entry> +<entry>SLI</entry> +<entry>SLI</entry> +<entry>SLBH</entry> +<entry>SLBH</entry> +<entry>SLBH</entry> +<entry>SLBH</entry> +<entry>SLBH</entry> +<entry>SLBH</entry> <entry>None</entry> </row> <row> <entry>User Context B</entry> +<entry>SLI</entry> +<entry>SLI</entry> +<entry>SLBH</entry> +<entry>SLBH</entry> +<entry>SLBH</entry> +<entry>SLBH</entry> +<entry>SLBH</entry> +<entry>SLBH</entry> +<entry>DI</entry> +<entry>None</entry> +</row> + +</tbody> +</tgroup> +</table> + + <table> +<title>Legend for Locking Requirements Table</title> +<tgroup cols="2"> +<tbody> + +<row> +<entry>SLIS</entry> +<entry>spin_lock_irqsave</entry> +</row> +<row> +<entry>SLI</entry> <entry>spin_lock_irq</entry> -<entry>spin_lock_irq</entry> -<entry>spin_lock_bh</entry> -<entry>spin_lock_bh</entry> -<entry>spin_lock_bh</entry> -<entry>spin_lock_bh</entry> -<entry>spin_lock_bh</entry> +</row> +<row> +<entry>SL</entry> +<entry>spin_lock</entry> +</row> +<row> +<entry>SLBH</entry> <entry>spin_lock_bh</entry> +</row> +<row> +<entry>DI</entry> <entry>down_interruptible</entry> -<entry>None</entry> </row> </tbody> </tgroup> </table> + </sect1> </chapter> diff --git a/Documentation/DocBook/usb.tmpl b/Documentation/DocBook/usb.tmpl index a2ebd651b05a8d..af293606fbe39a 100644 --- a/Documentation/DocBook/usb.tmpl +++ b/Documentation/DocBook/usb.tmpl @@ -185,7 +185,7 @@ </chapter> -<chapter><title>USB-Standard Types</title> +<chapter id="types"><title>USB-Standard Types</title> <para>In <filename><linux/usb/ch9.h></filename> you will find the USB data types defined in chapter 9 of the USB specification. @@ -197,7 +197,7 @@ </chapter> -<chapter><title>Host-Side Data Types and Macros</title> +<chapter id="hostside"><title>Host-Side Data Types and Macros</title> <para>The host side API exposes several layers to drivers, some of which are more necessary than others. @@ -211,7 +211,7 @@ </chapter> - <chapter><title>USB Core APIs</title> + <chapter id="usbcore"><title>USB Core APIs</title> <para>There are two basic I/O models in the USB API. The most elemental one is asynchronous: drivers submit requests @@ -248,7 +248,7 @@ !Edrivers/usb/core/hub.c </chapter> - <chapter><title>Host Controller APIs</title> + <chapter id="hcd"><title>Host Controller APIs</title> <para>These APIs are only for use by host controller drivers, most of which implement standard register interfaces such as @@ -285,7 +285,7 @@ !Idrivers/usb/core/buffer.c </chapter> - <chapter> + <chapter id="usbfs"> <title>The USB Filesystem (usbfs)</title> <para>This chapter presents the Linux <emphasis>usbfs</emphasis>. @@ -317,7 +317,7 @@ not it has a kernel driver. </para> - <sect1> + <sect1 id="usbfs-files"> <title>What files are in "usbfs"?</title> <para>Conventionally mounted at @@ -356,7 +356,7 @@ </sect1> - <sect1> + <sect1 id="usbfs-fstab"> <title>Mounting and Access Control</title> <para>There are a number of mount options for usbfs, which will @@ -439,7 +439,7 @@ </sect1> - <sect1> + <sect1 id="usbfs-devices"> <title>/proc/bus/usb/devices</title> <para>This file is handy for status viewing tools in user @@ -473,7 +473,7 @@ for (;;) { </para> </sect1> - <sect1> + <sect1 id="usbfs-bbbddd"> <title>/proc/bus/usb/BBB/DDD</title> <para>Use these files in one of these basic ways: @@ -510,7 +510,7 @@ for (;;) { </sect1> - <sect1> + <sect1 id="usbfs-lifecycle"> <title>Life Cycle of User Mode Drivers</title> <para>Such a driver first needs to find a device file @@ -565,7 +565,7 @@ for (;;) { </sect1> - <sect1><title>The ioctl() Requests</title> + <sect1 id="usbfs-ioctl"><title>The ioctl() Requests</title> <para>To use these ioctls, you need to include the following headers in your userspace program: @@ -604,7 +604,7 @@ for (;;) { </para> - <sect2> + <sect2 id="usbfs-mgmt"> <title>Management/Status Requests</title> <para>A number of usbfs requests don't deal very directly @@ -736,7 +736,7 @@ usbdev_ioctl (int fd, int ifno, unsigned request, void *param) </sect2> - <sect2> + <sect2 id="usbfs-sync"> <title>Synchronous I/O Support</title> <para>Synchronous requests involve the kernel blocking @@ -865,7 +865,7 @@ usbdev_ioctl (int fd, int ifno, unsigned request, void *param) </variablelist> </sect2> - <sect2> + <sect2 id="usbfs-async"> <title>Asynchronous I/O Support</title> <para>As mentioned above, there are situations where it may be diff --git a/Documentation/HOWTO b/Documentation/HOWTO index 48123dba5e6abe..ced9207bedcfc9 100644 --- a/Documentation/HOWTO +++ b/Documentation/HOWTO @@ -396,26 +396,6 @@ bugme-janitor mailing list (every change in the bugzilla is mailed here) -Managing bug reports --------------------- - -One of the best ways to put into practice your hacking skills is by fixing -bugs reported by other people. Not only you will help to make the kernel -more stable, you'll learn to fix real world problems and you will improve -your skills, and other developers will be aware of your presence. Fixing -bugs is one of the best ways to get merits among other developers, because -not many people like wasting time fixing other people's bugs. - -To work in the already reported bug reports, go to http://bugzilla.kernel.org. -If you want to be advised of the future bug reports, you can subscribe to the -bugme-new mailing list (only new bug reports are mailed here) or to the -bugme-janitor mailing list (every change in the bugzilla is mailed here) - - http://lists.osdl.org/mailman/listinfo/bugme-new - http://lists.osdl.org/mailman/listinfo/bugme-janitors - - - Mailing lists ------------- diff --git a/Documentation/block/capability.txt b/Documentation/block/capability.txt new file mode 100644 index 00000000000000..2f1729424ef49a --- /dev/null +++ b/Documentation/block/capability.txt @@ -0,0 +1,15 @@ +Generic Block Device Capability +=============================================================================== +This file documents the sysfs file block/<disk>/capability + +capability is a hex word indicating which capabilities a specific disk +supports. For more information on bits not listed here, see +include/linux/genhd.h + +Capability Value +------------------------------------------------------------------------------- +GENHD_FL_MEDIA_CHANGE_NOTIFY 4 + When this bit is set, the disk supports Asynchronous Notification + of media change events. These events will be broadcast to user + space via kernel uevent. + diff --git a/Documentation/dontdiff b/Documentation/dontdiff index 64e9f6c4826b01..595a5ea4c69034 100644 --- a/Documentation/dontdiff +++ b/Documentation/dontdiff @@ -10,10 +10,12 @@ *.grp *.gz *.html +*.i *.jpeg *.ko *.log *.lst +*.moc *.mod.c *.o *.orig @@ -25,6 +27,9 @@ *.s *.sgml *.so +*.symtypes +*.tab.c +*.tab.h *.tex *.ver *.xml @@ -32,9 +37,13 @@ *_vga16.c *cscope* *~ +*.9 +*.9.gz .* .cscope 53c700_d.h +53c7xx_d.h +53c7xx_u.h 53c8xx_d.h* BitKeeper COPYING @@ -70,9 +79,11 @@ bzImage* classlist.h* comp*.log compile.h* +conf config config-* config_data.h* +config_data.gz* conmakehash consolemap_deftbl.c* crc32table.h* @@ -81,18 +92,23 @@ defkeymap.c* devlist.h* docproc dummy_sym.c* +elf2ecoff elfconfig.h* filelist fixdep fore200e_mkfirm fore200e_pca_fw.c* +gconf gen-devlist gen-kdb_cmds.c* gen_crc32table gen_init_cpio genksyms gentbl +*_gray256.c ikconfig.h* +initramfs_data.cpio +initramfs_data.cpio.gz initramfs_list kallsyms kconfig @@ -100,19 +116,30 @@ kconfig.tk keywords.c* ksym.c* ksym.h* +kxgettext +lkc_defs.h lex.c* +lex.*.c +lk201-map.c logo_*.c logo_*_clut224.c logo_*_mono.c lxdialog mach-types mach-types.h +machtypes.h make_times_h map maui_boot.h +mconf +miboot* mk_elfconfig +mkboot +mkbugboot mkdep +mkprep mktables +mktree modpost modversions.h* offset.h @@ -120,18 +147,28 @@ offsets.h oui.c* parse.c* parse.h* +patches* +pca200e.bin +pca200e_ecd.bin2 +piggy.gz +piggyback pnmtologo ppc_defs.h* promcon_tbl.c* pss_boot.h +qconf raid6altivec*.c raid6int*.c raid6tables.c +relocs +series setup sim710_d.h* +sImage sm_tbl* split-include tags +tftpboot.img times.h* tkparse trix_boot.h @@ -139,8 +176,11 @@ utsrelease.h* version.h* vmlinux vmlinux-* +vmlinux.aout vmlinux.lds vsyscall.lds wanxlfw.inc uImage -zImage +unifdef +zImage* +zconf.hash.c diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 498ff31f3aa1d5..2d7ea85075bab3 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -62,7 +62,7 @@ Who: Dan Dennedy <dan@dennedy.org>, Stefan Richter <stefanr@s5r6.in-berlin.de> What: old NCR53C9x driver When: October 2007 Why: Replaced by the much better esp_scsi driver. Actual low-level - driver can ported over almost trivially. + driver can be ported over almost trivially. Who: David Miller <davem@davemloft.net> Christoph Hellwig <hch@lst.de> @@ -328,21 +328,20 @@ Who: Adrian Bunk <bunk@stusta.de> --------------------------- -What: libata.spindown_compat module parameter +What: libata spindown skipping and warning When: Dec 2008 -Why: halt(8) synchronizes caches for and spins down libata disks - because libata didn't use to spin down disk on system halt - (only synchronized caches). - Spin down on system halt is now implemented and can be tested - using sysfs node /sys/class/scsi_disk/h:c:i:l/manage_start_stop. +Why: Some halt(8) implementations synchronize caches for and spin + down libata disks because libata didn't use to spin down disk on + system halt (only synchronized caches). + Spin down on system halt is now implemented. sysfs node + /sys/class/scsi_disk/h:c:i:l/manage_start_stop is present if + spin down support is available. Because issuing spin down command to an already spun down disk - makes some disks spin up just to spin down again, the old - behavior needs to be maintained till userspace tool is updated - to check the sysfs node and not to spin down disks with the - node set to one. - This module parameter is to give userspace tool the time to - get updated and should be removed after userspace is - reasonably updated. + makes some disks spin up just to spin down again, libata tracks + device spindown status to skip the extra spindown command and + warn about it. + This is to give userspace tools the time to get updated and will + be removed after userspace is reasonably updated. Who: Tejun Heo <htejun@gmail.com> --------------------------- diff --git a/Documentation/filesystems/directory-locking b/Documentation/filesystems/directory-locking index d7099a9266fb3e..ff7b611abf330d 100644 --- a/Documentation/filesystems/directory-locking +++ b/Documentation/filesystems/directory-locking @@ -1,5 +1,6 @@ Locking scheme used for directory operations is based on two -kinds of locks - per-inode (->i_sem) and per-filesystem (->s_vfs_rename_sem). +kinds of locks - per-inode (->i_mutex) and per-filesystem +(->s_vfs_rename_mutex). For our purposes all operations fall in 5 classes: @@ -63,7 +64,7 @@ objects - A < B iff A is an ancestor of B. attempt to acquire some lock and already holds at least one lock. Let's consider the set of contended locks. First of all, filesystem lock is not contended, since any process blocked on it is not holding any locks. -Thus all processes are blocked on ->i_sem. +Thus all processes are blocked on ->i_mutex. Non-directory objects are not contended due to (3). Thus link creation can't be a part of deadlock - it can't be blocked on source diff --git a/Documentation/filesystems/porting b/Documentation/filesystems/porting index 5531694059ab16..dac45c92d872b9 100644 --- a/Documentation/filesystems/porting +++ b/Documentation/filesystems/porting @@ -107,7 +107,7 @@ free to drop it... --- [informational] -->link() callers hold ->i_sem on the object we are linking to. Some of your +->link() callers hold ->i_mutex on the object we are linking to. Some of your problems might be over... --- @@ -130,9 +130,9 @@ went in - and hadn't been documented ;-/). Just remove it from fs_flags --- [mandatory] -->setattr() is called without BKL now. Caller _always_ holds ->i_sem, so -watch for ->i_sem-grabbing code that might be used by your ->setattr(). -Callers of notify_change() need ->i_sem now. +->setattr() is called without BKL now. Caller _always_ holds ->i_mutex, so +watch for ->i_mutex-grabbing code that might be used by your ->setattr(). +Callers of notify_change() need ->i_mutex now. --- [recommended] diff --git a/Documentation/gpio.txt b/Documentation/gpio.txt index e8be0abb346c1b..36af58eba136ba 100644 --- a/Documentation/gpio.txt +++ b/Documentation/gpio.txt @@ -111,7 +111,9 @@ setting up a platform_device using the GPIO, is mark its direction: The return value is zero for success, else a negative errno. It should be checked, since the get/set calls don't have error returns and since -misconfiguration is possible. (These calls could sleep.) +misconfiguration is possible. You should normally issue these calls from +a task context. However, for spinlock-safe GPIOs it's OK to use them +before tasking is enabled, as part of early board setup. For output GPIOs, the value provided becomes the initial output value. This helps avoid signal glitching during system startup. @@ -197,7 +199,9 @@ However, many platforms don't currently support this mechanism. Passing invalid GPIO numbers to gpio_request() will fail, as will requesting GPIOs that have already been claimed with that call. The return value of -gpio_request() must be checked. (These calls could sleep.) +gpio_request() must be checked. You should normally issue these calls from +a task context. However, for spinlock-safe GPIOs it's OK to request GPIOs +before tasking is enabled, as part of early board setup. These calls serve two basic purposes. One is marking the signals which are actually in use as GPIOs, for better diagnostics; systems may have diff --git a/Documentation/i386/boot.txt b/Documentation/i386/boot.txt index d01b7a2a0f2eea..35985b34d5a6cc 100644 --- a/Documentation/i386/boot.txt +++ b/Documentation/i386/boot.txt @@ -2,7 +2,7 @@ ---------------------------- H. Peter Anvin <hpa@zytor.com> - Last update 2007-05-07 + Last update 2007-05-23 On the i386 platform, the Linux kernel uses a rather complicated boot convention. This has evolved partially due to historical aspects, as @@ -52,7 +52,8 @@ zImage kernels, typically looks like: 0A0000 +------------------------+ | Reserved for BIOS | Do not use. Reserved for BIOS EBDA. 09A000 +------------------------+ - | Stack/heap/cmdline | For use by the kernel real-mode code. + | Command line | + | Stack/heap | For use by the kernel real-mode code. 098000 +------------------------+ | Kernel setup | The kernel real-mode code. 090200 +------------------------+ @@ -73,10 +74,9 @@ zImage kernels, typically looks like: When using bzImage, the protected-mode kernel was relocated to 0x100000 ("high memory"), and the kernel real-mode block (boot sector, setup, and stack/heap) was made relocatable to any address between -0x10000 and end of low memory. Unfortunately, in protocols 2.00 and -2.01 the command line is still required to live in the 0x9XXXX memory -range, and that memory range is still overwritten by the early kernel. -The 2.02 protocol resolves that problem. +0x10000 and end of low memory. Unfortunately, in protocols 2.00 and +2.01 the 0x90000+ memory range is still used internally by the kernel; +the 2.02 protocol resolves that problem. It is desirable to keep the "memory ceiling" -- the highest point in low memory touched by the boot loader -- as low as possible, since @@ -93,6 +93,35 @@ zImage or old bzImage kernels, which need data written into the 0x90000 segment, the boot loader should make sure not to use memory above the 0x9A000 point; too many BIOSes will break above that point. +For a modern bzImage kernel with boot protocol version >= 2.02, a +memory layout like the following is suggested: + + ~ ~ + | Protected-mode kernel | +100000 +------------------------+ + | I/O memory hole | +0A0000 +------------------------+ + | Reserved for BIOS | Leave as much as possible unused + ~ ~ + | Command line | (Can also be below the X+10000 mark) +X+10000 +------------------------+ + | Stack/heap | For use by the kernel real-mode code. +X+08000 +------------------------+ + | Kernel setup | The kernel real-mode code. + | Kernel boot sector | The kernel legacy boot sector. +X +------------------------+ + | Boot loader | <- Boot sector entry point 0000:7C00 +001000 +------------------------+ + | Reserved for MBR/BIOS | +000800 +------------------------+ + | Typically used by MBR | +000600 +------------------------+ + | BIOS use only | +000000 +------------------------+ + +... where the address X is as low as the design of the boot loader +permits. + **** THE REAL-MODE KERNEL HEADER @@ -160,29 +189,147 @@ e.g. protocol version 2.01 will contain 0x0201 in this field. When setting fields in the header, you must make sure only to set fields supported by the protocol version in use. -The "kernel_version" field, if set to a nonzero value, contains a -pointer to a null-terminated human-readable kernel version number -string, less 0x200. This can be used to display the kernel version to -the user. This value should be less than (0x200*setup_sects). For -example, if this value is set to 0x1c00, the kernel version number -string can be found at offset 0x1e00 in the kernel file. This is a -valid value if and only if the "setup_sects" field contains the value -14 or higher. - -Most boot loaders will simply load the kernel at its target address -directly. Such boot loaders do not need to worry about filling in -most of the fields in the header. The following fields should be -filled out, however: - - vid_mode: - Please see the section on SPECIAL COMMAND LINE OPTIONS. - - type_of_loader: - If your boot loader has an assigned id (see table below), enter - 0xTV here, where T is an identifier for the boot loader and V is - a version number. Otherwise, enter 0xFF here. - - Assigned boot loader ids: + +**** DETAILS OF HEADER FIELDS + +For each field, some are information from the kernel to the bootloader +("read"), some are expected to be filled out by the bootloader +("write"), and some are expected to be read and modified by the +bootloader ("modify"). + +All general purpose boot loaders should write the fields marked +(obligatory). Boot loaders who want to load the kernel at a +nonstandard address should fill in the fields marked (reloc); other +boot loaders can ignore those fields. + +The byte order of all fields is littleendian (this is x86, after all.) + +Field name: setup_secs +Type: read +Offset/size: 0x1f1/1 +Protocol: ALL + + The size of the setup code in 512-byte sectors. If this field is + 0, the real value is 4. The real-mode code consists of the boot + sector (always one 512-byte sector) plus the setup code. + +Field name: root_flags +Type: modify (optional) +Offset/size: 0x1f2/2 +Protocol: ALL + + If this field is nonzero, the root defaults to readonly. The use of + this field is deprecated; use the "ro" or "rw" options on the + command line instead. + +Field name: syssize +Type: read +Offset/size: 0x1f4/4 (protocol 2.04+) 0x1f4/2 (protocol ALL) +Protocol: 2.04+ + + The size of the protected-mode code in units of 16-byte paragraphs. + For protocol versions older than 2.04 this field is only two bytes + wide, and therefore cannot be trusted for the size of a kernel if + the LOAD_HIGH flag is set. + +Field name: ram_size +Type: kernel internal +Offset/size: 0x1f8/2 +Protocol: ALL + + This field is obsolete. + +Field name: vid_mode +Type: modify (obligatory) +Offset/size: 0x1fa/2 + + Please see the section on SPECIAL COMMAND LINE OPTIONS. + +Field name: root_dev +Type: modify (optional) +Offset/size: 0x1fc/2 +Protocol: ALL + + The default root device device number. The use of this field is + deprecated, use the "root=" option on the command line instead. + +Field name: boot_flag +Type: read +Offset/size: 0x1fe/2 +Protocol: ALL + + Contains 0xAA55. This is the closest thing old Linux kernels have + to a magic number. + +Field name: jump +Type: read +Offset/size: 0x200/2 +Protocol: 2.00+ + + Contains an x86 jump instruction, 0xEB followed by a signed offset + relative to byte 0x202. This can be used to determine the size of + the header. + +Field name: header +Type: read +Offset/size: 0x202/4 +Protocol: 2.00+ + + Contains the magic number "HdrS" (0x53726448). + +Field name: version +Type: read +Offset/size: 0x206/2 +Protocol: 2.00+ + + Contains the boot protocol version, in (major << 8)+minor format, + e.g. 0x0204 for version 2.04, and 0x0a11 for a hypothetical version + 10.17. + +Field name: readmode_swtch +Type: modify (optional) +Offset/size: 0x208/4 +Protocol: 2.00+ + + Boot loader hook (see ADVANCED BOOT LOADER HOOKS below.) + +Field name: start_sys +Type: read +Offset/size: 0x20c/4 +Protocol: 2.00+ + + The load low segment (0x1000). Obsolete. + +Field name: kernel_version +Type: read +Offset/size: 0x20e/2 +Protocol: 2.00+ + + If set to a nonzero value, contains a pointer to a NUL-terminated + human-readable kernel version number string, less 0x200. This can + be used to display the kernel version to the user. This value + should be less than (0x200*setup_sects). + + For example, if this value is set to 0x1c00, the kernel version + number string can be found at offset 0x1e00 in the kernel file. + This is a valid value if and only if the "setup_sects" field + contains the value 15 or higher, as: + + 0x1c00 < 15*0x200 (= 0x1e00) but + 0x1c00 >= 14*0x200 (= 0x1c00) + + 0x1c00 >> 9 = 14, so the minimum value for setup_secs is 15. + +Field name: type_of_loader +Type: write (obligatory) +Offset/size: 0x210/1 +Protocol: 2.00+ + + If your boot loader has an assigned id (see table below), enter + 0xTV here, where T is an identifier for the boot loader and V is + a version number. Otherwise, enter 0xFF here. + + Assigned boot loader ids: 0 LILO (0x00 reserved for pre-2.00 bootloader) 1 Loadlin 2 bootsect-loader (0x20, all other values reserved) @@ -193,60 +340,145 @@ filled out, however: 8 U-BOOT 9 Xen A Gujin + B Qemu + + Please contact <hpa@zytor.com> if you need a bootloader ID + value assigned. + +Field name: loadflags +Type: modify (obligatory) +Offset/size: 0x211/1 +Protocol: 2.00+ + + This field is a bitmask. + + Bit 0 (read): LOADED_HIGH + - If 0, the protected-mode code is loaded at 0x10000. + - If 1, the protected-mode code is loaded at 0x100000. + + Bit 7 (write): CAN_USE_HEAP + Set this bit to 1 to indicate that the value entered in the + heap_end_ptr is valid. If this field is clear, some setup code + functionality will be disabled. + +Field name: setup_move_size +Type: modify (obligatory) +Offset/size: 0x212/2 +Protocol: 2.00-2.01 + + When using protocol 2.00 or 2.01, if the real mode kernel is not + loaded at 0x90000, it gets moved there later in the loading + sequence. Fill in this field if you want additional data (such as + the kernel command line) moved in addition to the real-mode kernel + itself. + + The unit is bytes starting with the beginning of the boot sector. + + This field is can be ignored when the protocol is 2.02 or higher, or + if the real-mode code is loaded at 0x90000. + +Field name: code32_start +Type: modify (optional, reloc) +Offset/size: 0x214/4 +Protocol: 2.00+ + + The address to jump to in protected mode. This defaults to the load + address of the kernel, and can be used by the boot loader to + determine the proper load address. + + This field can be modified for two purposes: + + 1. as a boot loader hook (see ADVANCED BOOT LOADER HOOKS below.) + + 2. if a bootloader which does not install a hook loads a + relocatable kernel at a nonstandard address it will have to modify + this field to point to the load address. + +Field name: ramdisk_image +Type: write (obligatory) +Offset/size: 0x218/4 +Protocol: 2.00+ + + The 32-bit linear address of the initial ramdisk or ramfs. Leave at + zero if there is no initial ramdisk/ramfs. + +Field name: ramdisk_size +Type: write (obligatory) +Offset/size: 0x21c/4 +Protocol: 2.00+ + + Size of the initial ramdisk or ramfs. Leave at zero if there is no + initial ramdisk/ramfs. + +Field name: bootsect_kludge +Type: kernel internal +Offset/size: 0x220/4 +Protocol: 2.00+ + + This field is obsolete. + +Field name: heap_end_ptr +Type: write (obligatory) +Offset/size: 0x224/2 +Protocol: 2.01+ + + Set this field to the offset (from the beginning of the real-mode + code) of the end of the setup stack/heap, minus 0x0200. + +Field name: cmd_line_ptr +Type: write (obligatory) +Offset/size: 0x228/4 +Protocol: 2.02+ + + Set this field to the linear address of the kernel command line. + The kernel command line can be located anywhere between the end of + the setup heap and 0xA0000; it does not have to be located in the + same 64K segment as the real-mode code itself. + + Fill in this field even if your boot loader does not support a + command line, in which case you can point this to an empty string + (or better yet, to the string "auto".) If this field is left at + zero, the kernel will assume that your boot loader does not support + the 2.02+ protocol. + +Field name: initrd_addr_max +Type: read +Offset/size: 0x22c/4 +Protocol: 2.03+ + + The maximum address that may be occupied by the initial + ramdisk/ramfs contents. For boot protocols 2.02 or earlier, this + field is not present, and the maximum address is 0x37FFFFFF. (This + address is defined as the address of the highest safe byte, so if + your ramdisk is exactly 131072 bytes long and this field is + 0x37FFFFFF, you can start your ramdisk at 0x37FE0000.) + +Field name: kernel_alignment +Type: read (reloc) +Offset/size: 0x230/4 +Protocol: 2.05+ + + Alignment unit required by the kernel (if relocatable_kernel is true.) + +Field name: relocatable_kernel +Type: read (reloc) +Offset/size: 0x234/1 +Protocol: 2.05+ + + If this field is nonzero, the protected-mode part of the kernel can + be loaded at any address that satisfies the kernel_alignment field. + After loading, the boot loader must set the code32_start field to + point to the loaded code, or to a boot loader hook. + +Field name: cmdline_size +Type: read +Offset/size: 0x238/4 +Protocol: 2.06+ - Please contact <hpa@zytor.com> if you need a bootloader ID - value assigned. - - loadflags, heap_end_ptr: - If the protocol version is 2.01 or higher, enter the - offset limit of the setup heap into heap_end_ptr and set the - 0x80 bit (CAN_USE_HEAP) of loadflags. heap_end_ptr appears to - be relative to the start of setup (offset 0x0200). - - setup_move_size: - When using protocol 2.00 or 2.01, if the real mode - kernel is not loaded at 0x90000, it gets moved there later in - the loading sequence. Fill in this field if you want - additional data (such as the kernel command line) moved in - addition to the real-mode kernel itself. - - The unit is bytes starting with the beginning of the boot - sector. - - ramdisk_image, ramdisk_size: - If your boot loader has loaded an initial ramdisk (initrd), - set ramdisk_image to the 32-bit pointer to the ramdisk data - and the ramdisk_size to the size of the ramdisk data. - - The initrd should typically be located as high in memory as - possible, as it may otherwise get overwritten by the early - kernel initialization sequence. However, it must never be - located above the address specified in the initrd_addr_max - field. The initrd should be at least 4K page aligned. - - cmd_line_ptr: - If the protocol version is 2.02 or higher, this is a 32-bit - pointer to the kernel command line. The kernel command line - can be located anywhere between the end of setup and 0xA0000. - Fill in this field even if your boot loader does not support a - command line, in which case you can point this to an empty - string (or better yet, to the string "auto".) If this field - is left at zero, the kernel will assume that your boot loader - does not support the 2.02+ protocol. - - ramdisk_max: - The maximum address that may be occupied by the initrd - contents. For boot protocols 2.02 or earlier, this field is - not present, and the maximum address is 0x37FFFFFF. (This - address is defined as the address of the highest safe byte, so - if your ramdisk is exactly 131072 bytes long and this field is - 0x37FFFFFF, you can start your ramdisk at 0x37FE0000.) - - cmdline_size: - The maximum size of the command line without the terminating - zero. This means that the command line can contain at most - cmdline_size characters. With protocol version 2.05 and - earlier, the maximum size was 255. + The maximum size of the command line without the terminating + zero. This means that the command line can contain at most + cmdline_size characters. With protocol version 2.05 and earlier, the + maximum size was 255. **** THE KERNEL COMMAND LINE @@ -494,7 +726,7 @@ switched off, especially if the loaded kernel has the floppy driver as a demand-loaded module! -**** ADVANCED BOOT TIME HOOKS +**** ADVANCED BOOT LOADER HOOKS If the boot loader runs in a particularly hostile environment (such as LOADLIN, which runs under DOS) it may be impossible to follow the @@ -519,4 +751,5 @@ IMPORTANT: All the hooks are required to preserve %esp, %ebp, %esi and set them up to BOOT_DS (0x18) yourself. After completing your hook, you should jump to the address - that was in this field before your boot loader overwrote it. + that was in this field before your boot loader overwrote it + (relocated, if appropriate.) diff --git a/Documentation/initrd.txt b/Documentation/initrd.txt index 15f1b35deb3410..d3dc505104da67 100644 --- a/Documentation/initrd.txt +++ b/Documentation/initrd.txt @@ -27,16 +27,20 @@ When using initrd, the system typically boots as follows: 1) the boot loader loads the kernel and the initial RAM disk 2) the kernel converts initrd into a "normal" RAM disk and frees the memory used by initrd - 3) initrd is mounted read-write as root - 4) /linuxrc is executed (this can be any valid executable, including + 3) if the root device is not /dev/ram0, the old (deprecated) + change_root procedure is followed. see the "Obsolete root change + mechanism" section below. + 4) root device is mounted. if it is /dev/ram0, the initrd image is + then mounted as root + 5) /sbin/init is executed (this can be any valid executable, including shell scripts; it is run with uid 0 and can do basically everything - init can do) - 5) linuxrc mounts the "real" root file system - 6) linuxrc places the root file system at the root directory using the + init can do). + 6) init mounts the "real" root file system + 7) init places the root file system at the root directory using the pivot_root system call - 7) the usual boot sequence (e.g. invocation of /sbin/init) is performed - on the root file system - 8) the initrd file system is removed + 8) init execs the /sbin/init on the new root filesystem, performing + the usual boot sequence + 9) the initrd file system is removed Note that changing the root directory does not involve unmounting it. It is therefore possible to leave processes running on initrd during that @@ -70,7 +74,7 @@ initrd adds the following new options: root=/dev/ram0 initrd is mounted as root, and the normal boot procedure is followed, - with the RAM disk still mounted as root. + with the RAM disk mounted as root. Compressed cpio images ---------------------- @@ -137,11 +141,11 @@ We'll describe the loopback device method: # mkdir /mnt/dev # mknod /mnt/dev/console c 5 1 5) copy all the files that are needed to properly use the initrd - environment. Don't forget the most important file, /linuxrc - Note that /linuxrc's permissions must include "x" (execute). + environment. Don't forget the most important file, /sbin/init + Note that /sbin/init's permissions must include "x" (execute). 6) correct operation the initrd environment can frequently be tested even without rebooting with the command - # chroot /mnt /linuxrc + # chroot /mnt /sbin/init This is of course limited to initrds that do not interfere with the general system state (e.g. by reconfiguring network interfaces, overwriting mounted devices, trying to start already running demons, @@ -154,7 +158,7 @@ We'll describe the loopback device method: # gzip -9 initrd For experimenting with initrd, you may want to take a rescue floppy and -only add a symbolic link from /linuxrc to /bin/sh. Alternatively, you +only add a symbolic link from /sbin/init to /bin/sh. Alternatively, you can try the experimental newlib environment [2] to create a small initrd. @@ -163,15 +167,14 @@ boot loaders support initrd. Since the boot process is still compatible with an older mechanism, the following boot command line parameters have to be given: - root=/dev/ram0 init=/linuxrc rw + root=/dev/ram0 rw (rw is only necessary if writing to the initrd file system.) With LOADLIN, you simply execute LOADLIN <kernel> initrd=<disk_image> -e.g. LOADLIN C:\LINUX\BZIMAGE initrd=C:\LINUX\INITRD.GZ root=/dev/ram0 - init=/linuxrc rw +e.g. LOADLIN C:\LINUX\BZIMAGE initrd=C:\LINUX\INITRD.GZ root=/dev/ram0 rw With LILO, you add the option INITRD=<path> to either the global section or to the section of the respective kernel in /etc/lilo.conf, and pass @@ -179,7 +182,7 @@ the options using APPEND, e.g. image = /bzImage initrd = /boot/initrd.gz - append = "root=/dev/ram0 init=/linuxrc rw" + append = "root=/dev/ram0 rw" and run /sbin/lilo @@ -191,7 +194,7 @@ Now you can boot and enjoy using initrd. Changing the root device ------------------------ -When finished with its duties, linuxrc typically changes the root device +When finished with its duties, init typically changes the root device and proceeds with starting the Linux system on the "real" root device. The procedure involves the following steps: @@ -217,7 +220,7 @@ must exist before calling pivot_root. Example: # mkdir initrd # pivot_root . initrd -Now, the linuxrc process may still access the old root via its +Now, the init process may still access the old root via its executable, shared libraries, standard input/output/error, and its current root directory. All these references are dropped by the following command: @@ -249,10 +252,6 @@ disk can be freed: It is also possible to use initrd with an NFS-mounted root, see the pivot_root(8) man page for details. -Note: if linuxrc or any program exec'ed from it terminates for some -reason, the old change_root mechanism is invoked (see section "Obsolete -root change mechanism"). - Usage scenarios --------------- @@ -264,15 +263,15 @@ as follows: 1) system boots from floppy or other media with a minimal kernel (e.g. support for RAM disks, initrd, a.out, and the Ext2 FS) and loads initrd - 2) /linuxrc determines what is needed to (1) mount the "real" root FS + 2) /sbin/init determines what is needed to (1) mount the "real" root FS (i.e. device type, device drivers, file system) and (2) the distribution media (e.g. CD-ROM, network, tape, ...). This can be done by asking the user, by auto-probing, or by using a hybrid approach. - 3) /linuxrc loads the necessary kernel modules - 4) /linuxrc creates and populates the root file system (this doesn't + 3) /sbin/init loads the necessary kernel modules + 4) /sbin/init creates and populates the root file system (this doesn't have to be a very usable system yet) - 5) /linuxrc invokes pivot_root to change the root file system and + 5) /sbin/init invokes pivot_root to change the root file system and execs - via chroot - a program that continues the installation 6) the boot loader is installed 7) the boot loader is configured to load an initrd with the set of @@ -291,7 +290,7 @@ different hardware configurations in a single administrative domain. In such cases, it is desirable to generate only a small set of kernels (ideally only one) and to keep the system-specific part of configuration information as small as possible. In this case, a common initrd could be -generated with all the necessary modules. Then, only /linuxrc or a file +generated with all the necessary modules. Then, only /sbin/init or a file read by it would have to be different. A third scenario are more convenient recovery disks, because information @@ -337,6 +336,25 @@ This old, deprecated mechanism is commonly called "change_root", while the new, supported mechanism is called "pivot_root". +Mixed change_root and pivot_root mechanism +------------------------------------------ + +In case you did not want to use root=/dev/ram0 to trig the pivot_root mechanism, +you may create both /linuxrc and /sbin/init in your initrd image. + +/linuxrc would contain only the following: + +#! /bin/sh +mount -n -t proc proc /proc +echo 0x0100 >/proc/sys/kernel/real-root-dev +umount -n /proc + +Once linuxrc exited, the kernel would mount again your initrd as root, +this time executing /sbin/init. Again, it would be duty of this init +to build the right environment (maybe using the root= device passed on +the cmdline) before the final execution of the real /sbin/init. + + Resources --------- diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 09220a1e22d964..aae2282600ca41 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -396,6 +396,26 @@ and is between 256 and 4096 characters. It is defined in the file clocksource is not available, it defaults to PIT. Format: { pit | tsc | cyclone | pmtmr } + clocksource= [GENERIC_TIME] Override the default clocksource + Format: <string> + Override the default clocksource and use the clocksource + with the name specified. + Some clocksource names to choose from, depending on + the platform: + [all] jiffies (this is the base, fallback clocksource) + [ACPI] acpi_pm + [ARM] imx_timer1,OSTS,netx_timer,mpu_timer2, + pxa_timer,timer3,32k_counter,timer0_1 + [AVR32] avr32 + [IA-32] pit,hpet,tsc,vmi-timer; + scx200_hrt on Geode; cyclone on IBM x440 + [MIPS] MIPS + [PARISC] cr16 + [S390] tod + [SH] SuperH + [SPARC64] tick + [X86-64] hpet,tsc + code_bytes [IA32] How many bytes of object code to print in an oops report. Range: 0 - 8192 @@ -1807,10 +1827,6 @@ and is between 256 and 4096 characters. It is defined in the file time Show timing data prefixed to each printk message line - clocksource= [GENERIC_TIME] Override the default clocksource - Override the default clocksource and use the clocksource - with the name specified. - tipar.timeout= [HW,PPT] Set communications timeout in tenths of a second (default 15). diff --git a/Documentation/ldm.txt b/Documentation/ldm.txt index e266e11c19a380..718085bc9f1a45 100644 --- a/Documentation/ldm.txt +++ b/Documentation/ldm.txt @@ -2,10 +2,13 @@ LDM - Logical Disk Manager (Dynamic Disks) ------------------------------------------ +Originally Written by FlatCap - Richard Russon <ldm@flatcap.org>. +Last Updated by Anton Altaparmakov on 30 March 2007 for Windows Vista. + Overview -------- -Windows 2000 and XP use a new partitioning scheme. It is a complete +Windows 2000, XP, and Vista use a new partitioning scheme. It is a complete replacement for the MSDOS style partitions. It stores its information in a 1MiB journalled database at the end of the physical disk. The size of partitions is limited only by disk space. The maximum number of partitions is @@ -23,7 +26,11 @@ Once the LDM driver has divided up the disk, you can use the MD driver to assemble any multi-partition volumes, e.g. Stripes, RAID5. To prevent legacy applications from repartitioning the disk, the LDM creates a -dummy MSDOS partition containing one disk-sized partition. +dummy MSDOS partition containing one disk-sized partition. This is what is +supported with the Linux LDM driver. + +A newer approach that has been implemented with Vista is to put LDM on top of a +GPT label disk. This is not supported by the Linux LDM driver yet. Example @@ -88,13 +95,13 @@ and cannot boot from a Dynamic Disk. More Documentation ------------------ -There is an Overview of the LDM online together with complete Technical -Documentation. It can also be downloaded in html. +There is an Overview of the LDM together with complete Technical Documentation. +It is available for download. - http://linux-ntfs.sourceforge.net/ldm/index.html - http://linux-ntfs.sourceforge.net/downloads.html + http://www.linux-ntfs.org/content/view/19/37/ -If you have any LDM questions that aren't answered on the website, email me. +If you have any LDM questions that aren't answered in the documentation, email +me. Cheers, FlatCap - Richard Russon diff --git a/Documentation/memory-barriers.txt b/Documentation/memory-barriers.txt index 58408dd023c77e..650657c5473340 100644 --- a/Documentation/memory-barriers.txt +++ b/Documentation/memory-barriers.txt @@ -24,7 +24,7 @@ Contents: (*) Explicit kernel barriers. - Compiler barrier. - - The CPU memory barriers. + - CPU memory barriers. - MMIO write barrier. (*) Implicit kernel memory barriers. @@ -265,7 +265,7 @@ Memory barriers are such interventions. They impose a perceived partial ordering over the memory operations on either side of the barrier. Such enforcement is important because the CPUs and other devices in a system -can use a variety of tricks to improve performance - including reordering, +can use a variety of tricks to improve performance, including reordering, deferral and combination of memory operations; speculative loads; speculative branch prediction and various types of caching. Memory barriers are used to override or suppress these tricks, allowing the code to sanely control the @@ -457,7 +457,7 @@ sequence, Q must be either &A or &B, and that: (Q == &A) implies (D == 1) (Q == &B) implies (D == 4) -But! CPU 2's perception of P may be updated _before_ its perception of B, thus +But! CPU 2's perception of P may be updated _before_ its perception of B, thus leading to the following situation: (Q == &B) and (D == 2) ???? @@ -573,7 +573,7 @@ Basically, the read barrier always has to be there, even though it can be of the "weaker" type. [!] Note that the stores before the write barrier would normally be expected to -match the loads after the read barrier or data dependency barrier, and vice +match the loads after the read barrier or the data dependency barrier, and vice versa: CPU 1 CPU 2 @@ -588,7 +588,7 @@ versa: EXAMPLES OF MEMORY BARRIER SEQUENCES ------------------------------------ -Firstly, write barriers act as a partial orderings on store operations. +Firstly, write barriers act as partial orderings on store operations. Consider the following sequence of events: CPU 1 @@ -608,15 +608,15 @@ STORE B, STORE C } all occurring before the unordered set of { STORE D, STORE E +-------+ : : | | +------+ | |------>| C=3 | } /\ - | | : +------+ }----- \ -----> Events perceptible - | | : | A=1 | } \/ to rest of system + | | : +------+ }----- \ -----> Events perceptible to + | | : | A=1 | } \/ the rest of the system | | : +------+ } | CPU 1 | : | B=2 | } | | +------+ } | | wwwwwwwwwwwwwwww } <--- At this point the write barrier | | +------+ } requires all stores prior to the | | : | E=5 | } barrier to be committed before - | | : +------+ } further stores may be take place. + | | : +------+ } further stores may take place | |------>| D=4 | } | | +------+ +-------+ : : @@ -626,7 +626,7 @@ STORE B, STORE C } all occurring before the unordered set of { STORE D, STORE E V -Secondly, data dependency barriers act as a partial orderings on data-dependent +Secondly, data dependency barriers act as partial orderings on data-dependent loads. Consider the following sequence of events: CPU 1 CPU 2 @@ -975,7 +975,7 @@ compiler from moving the memory accesses either side of it to the other side: barrier(); -This a general barrier - lesser varieties of compiler barrier do not exist. +This is a general barrier - lesser varieties of compiler barrier do not exist. The compiler barrier has no direct effect on the CPU, which may then reorder things however it wishes. @@ -997,7 +997,7 @@ The Linux kernel has eight basic CPU memory barriers: All CPU memory barriers unconditionally imply compiler barriers. SMP memory barriers are reduced to compiler barriers on uniprocessor compiled -systems because it is assumed that a CPU will be appear to be self-consistent, +systems because it is assumed that a CPU will appear to be self-consistent, and will order overlapping accesses correctly with respect to itself. [!] Note that SMP memory barriers _must_ be used to control the ordering of @@ -1146,9 +1146,9 @@ for each construct. These operations all imply certain barriers: Therefore, from (1), (2) and (4) an UNLOCK followed by an unconditional LOCK is equivalent to a full barrier, but a LOCK followed by an UNLOCK is not. -[!] Note: one of the consequence of LOCKs and UNLOCKs being only one-way - barriers is that the effects instructions outside of a critical section may - seep into the inside of the critical section. +[!] Note: one of the consequences of LOCKs and UNLOCKs being only one-way + barriers is that the effects of instructions outside of a critical section + may seep into the inside of the critical section. A LOCK followed by an UNLOCK may not be assumed to be full memory barrier because it is possible for an access preceding the LOCK to happen after the @@ -1239,7 +1239,7 @@ three CPUs; then should the following sequence of events occur: UNLOCK M UNLOCK Q *D = d; *H = h; -Then there is no guarantee as to what order CPU #3 will see the accesses to *A +Then there is no guarantee as to what order CPU 3 will see the accesses to *A through *H occur in, other than the constraints imposed by the separate locks on the separate CPUs. It might, for example, see: @@ -1269,12 +1269,12 @@ However, if the following occurs: UNLOCK M [2] *H = h; -CPU #3 might see: +CPU 3 might see: *E, LOCK M [1], *C, *B, *A, UNLOCK M [1], LOCK M [2], *H, *F, *G, UNLOCK M [2], *D -But assuming CPU #1 gets the lock first, it won't see any of: +But assuming CPU 1 gets the lock first, CPU 3 won't see any of: *B, *C, *D, *F, *G or *H preceding LOCK M [1] *A, *B or *C following UNLOCK M [1] @@ -1327,12 +1327,12 @@ spinlock, for example: mmiowb(); spin_unlock(Q); -this will ensure that the two stores issued on CPU #1 appear at the PCI bridge -before either of the stores issued on CPU #2. +this will ensure that the two stores issued on CPU 1 appear at the PCI bridge +before either of the stores issued on CPU 2. -Furthermore, following a store by a load to the same device obviates the need -for an mmiowb(), because the load forces the store to complete before the load +Furthermore, following a store by a load from the same device obviates the need +for the mmiowb(), because the load forces the store to complete before the load is performed: CPU 1 CPU 2 @@ -1363,7 +1363,7 @@ circumstances in which reordering definitely _could_ be a problem: (*) Atomic operations. - (*) Accessing devices (I/O). + (*) Accessing devices. (*) Interrupts. @@ -1399,7 +1399,7 @@ To wake up a particular waiter, the up_read() or up_write() functions have to: (1) read the next pointer from this waiter's record to know as to where the next waiter record is; - (4) read the pointer to the waiter's task structure; + (2) read the pointer to the waiter's task structure; (3) clear the task pointer to tell the waiter it has been given the semaphore; @@ -1407,7 +1407,7 @@ To wake up a particular waiter, the up_read() or up_write() functions have to: (5) release the reference held on the waiter's task struct. -In otherwords, it has to perform this sequence of events: +In other words, it has to perform this sequence of events: LOAD waiter->list.next; LOAD waiter->task; @@ -1502,7 +1502,7 @@ operations and adjusting reference counters towards object destruction, and as such the implicit memory barrier effects are necessary. -The following operation are potential problems as they do _not_ imply memory +The following operations are potential problems as they do _not_ imply memory barriers, but might be used for implementing such things as UNLOCK-class operations: @@ -1517,7 +1517,7 @@ With these the appropriate explicit memory barrier should be used if necessary The following also do _not_ imply memory barriers, and so may require explicit memory barriers under some circumstances (smp_mb__before_atomic_dec() for -instance)): +instance): atomic_add(); atomic_sub(); @@ -1641,8 +1641,8 @@ functions: indeed have special I/O space access cycles and instructions, but many CPUs don't have such a concept. - The PCI bus, amongst others, defines an I/O space concept - which on such - CPUs as i386 and x86_64 cpus readily maps to the CPU's concept of I/O + The PCI bus, amongst others, defines an I/O space concept which - on such + CPUs as i386 and x86_64 - readily maps to the CPU's concept of I/O space. However, it may also be mapped as a virtual I/O space in the CPU's memory map, particularly on those CPUs that don't support alternate I/O spaces. @@ -1664,7 +1664,7 @@ functions: i386 architecture machines, for example, this is controlled by way of the MTRR registers. - Ordinarily, these will be guaranteed to be fully ordered and uncombined,, + Ordinarily, these will be guaranteed to be fully ordered and uncombined, provided they're not accessing a prefetchable device. However, intermediary hardware (such as a PCI bridge) may indulge in @@ -1689,7 +1689,7 @@ functions: (*) ioreadX(), iowriteX() - These will perform as appropriate for the type of access they're actually + These will perform appropriately for the type of access they're actually doing, be it inX()/outX() or readX()/writeX(). @@ -1705,7 +1705,7 @@ of arch-specific code. This means that it must be considered that the CPU will execute its instruction stream in any order it feels like - or even in parallel - provided that if an -instruction in the stream depends on the an earlier instruction, then that +instruction in the stream depends on an earlier instruction, then that earlier instruction must be sufficiently complete[*] before the later instruction may proceed; in other words: provided that the appearance of causality is maintained. @@ -1795,8 +1795,8 @@ eventually become visible on all CPUs, there's no guarantee that they will become apparent in the same order on those other CPUs. -Consider dealing with a system that has pair of CPUs (1 & 2), each of which has -a pair of parallel data caches (CPU 1 has A/B, and CPU 2 has C/D): +Consider dealing with a system that has a pair of CPUs (1 & 2), each of which +has a pair of parallel data caches (CPU 1 has A/B, and CPU 2 has C/D): : : +--------+ @@ -1835,7 +1835,7 @@ Imagine the system has the following properties: (*) the coherency queue is not flushed by normal loads to lines already present in the cache, even though the contents of the queue may - potentially effect those loads. + potentially affect those loads. Imagine, then, that two writes are made on the first CPU, with a write barrier between them to guarantee that they will appear to reach that CPU's caches in @@ -1845,7 +1845,7 @@ the requisite order: =============== =============== ======================================= u == 0, v == 1 and p == &u, q == &u v = 2; - smp_wmb(); Make sure change to v visible before + smp_wmb(); Make sure change to v is visible before change to p <A:modify v=2> v is now in cache A exclusively p = &v; @@ -1853,7 +1853,7 @@ the requisite order: The write memory barrier forces the other CPUs in the system to perceive that the local CPU's caches have apparently been updated in the correct order. But -now imagine that the second CPU that wants to read those values: +now imagine that the second CPU wants to read those values: CPU 1 CPU 2 COMMENT =============== =============== ======================================= @@ -1861,7 +1861,7 @@ now imagine that the second CPU that wants to read those values: q = p; x = *q; -The above pair of reads may then fail to happen in expected order, as the +The above pair of reads may then fail to happen in the expected order, as the cacheline holding p may get updated in one of the second CPU's caches whilst the update to the cacheline holding v is delayed in the other of the second CPU's caches by some other cache event: @@ -1916,7 +1916,7 @@ access depends on a read, not all do, so it may not be relied on. Other CPUs may also have split caches, but must coordinate between the various cachelets for normal memory accesses. The semantics of the Alpha removes the -need for coordination in absence of memory barriers. +need for coordination in the absence of memory barriers. CACHE COHERENCY VS DMA @@ -1931,10 +1931,10 @@ invalidate them as well). In addition, the data DMA'd to RAM by a device may be overwritten by dirty cache lines being written back to RAM from a CPU's cache after the device has -installed its own data, or cache lines simply present in a CPUs cache may -simply obscure the fact that RAM has been updated, until at such time as the -cacheline is discarded from the CPU's cache and reloaded. To deal with this, -the appropriate part of the kernel must invalidate the overlapping bits of the +installed its own data, or cache lines present in the CPU's cache may simply +obscure the fact that RAM has been updated, until at such time as the cacheline +is discarded from the CPU's cache and reloaded. To deal with this, the +appropriate part of the kernel must invalidate the overlapping bits of the cache on each CPU. See Documentation/cachetlb.txt for more information on cache management. @@ -1944,7 +1944,7 @@ CACHE COHERENCY VS MMIO ----------------------- Memory mapped I/O usually takes place through memory locations that are part of -a window in the CPU's memory space that have different properties assigned than +a window in the CPU's memory space that has different properties assigned than the usual RAM directed window. Amongst these properties is usually the fact that such accesses bypass the @@ -1960,7 +1960,7 @@ THE THINGS CPUS GET UP TO ========================= A programmer might take it for granted that the CPU will perform memory -operations in exactly the order specified, so that if a CPU is, for example, +operations in exactly the order specified, so that if the CPU is, for example, given the following piece of code to execute: a = *A; @@ -1969,7 +1969,7 @@ given the following piece of code to execute: d = *D; *E = e; -They would then expect that the CPU will complete the memory operation for each +they would then expect that the CPU will complete the memory operation for each instruction before moving on to the next one, leading to a definite sequence of operations as seen by external observers in the system: @@ -1986,8 +1986,8 @@ assumption doesn't hold because: (*) loads may be done speculatively, and the result discarded should it prove to have been unnecessary; - (*) loads may be done speculatively, leading to the result having being - fetched at the wrong time in the expected sequence of events; + (*) loads may be done speculatively, leading to the result having been fetched + at the wrong time in the expected sequence of events; (*) the order of the memory accesses may be rearranged to promote better use of the CPU buses and caches; @@ -2069,12 +2069,12 @@ AND THEN THERE'S THE ALPHA The DEC Alpha CPU is one of the most relaxed CPUs there is. Not only that, some versions of the Alpha CPU have a split data cache, permitting them to have -two semantically related cache lines updating at separate times. This is where +two semantically-related cache lines updated at separate times. This is where the data dependency barrier really becomes necessary as this synchronises both caches with the memory coherence system, thus making it seem like pointer changes vs new data occur in the right order. -The Alpha defines the Linux's kernel's memory barrier model. +The Alpha defines the Linux kernel's memory barrier model. See the subsection on "Cache Coherency" above. diff --git a/Documentation/networking/netdevices.txt b/Documentation/networking/netdevices.txt index 847cedb238f6c0..ce1361f952436e 100644 --- a/Documentation/networking/netdevices.txt +++ b/Documentation/networking/netdevices.txt @@ -49,7 +49,7 @@ dev->hard_start_xmit: for this and return -1 when the spin lock fails. The locking there should also properly protect against set_multicast_list - Context: BHs disabled + Context: Process with BHs disabled or BH (timer). Notes: netif_queue_stopped() is guaranteed false Interrupts must be enabled when calling hard_start_xmit. (Interrupts must also be enabled when enabling the BH handler.) diff --git a/Documentation/s390/cds.txt b/Documentation/s390/cds.txt index 05a2b4f7e38f7e..58919d6a593ae0 100644 --- a/Documentation/s390/cds.txt +++ b/Documentation/s390/cds.txt @@ -51,13 +51,8 @@ The major changes are: * The interrupt handlers must be adapted to use a ccw_device as argument. Moreover, they don't return a devstat, but an irb. * Before initiating an io, the options must be set via ccw_device_set_options(). - -read_dev_chars() - read device characteristics - -read_conf_data() -read_conf_data_lpm() - read configuration data. +* Instead of calling read_dev_chars()/read_conf_data(), the driver issues + the channel program and handles the interrupt itself. ccw_device_get_ciw() get commands from extended sense data. @@ -130,11 +125,6 @@ present their hardware status by the same (shared) IRQ, the operating system has to call every single device driver registered on this IRQ in order to determine the device driver owning the device that raised the interrupt. -In order not to introduce a new I/O concept to the common Linux code, -Linux/390 preserves the IRQ concept and semantically maps the ESA/390 -subchannels to Linux as IRQs. This allows Linux/390 to support up to 64k -different IRQs, uniquely representing a single device each. - Up to kernel 2.4, Linux/390 used to provide interfaces via the IRQ (subchannel). For internal use of the common I/O layer, these are still there. However, device drivers should use the new calling interface via the ccw_device only. @@ -151,9 +141,8 @@ information during their initialization step to recognize the devices they support using the information saved in the struct ccw_device given to them. This methods implies that Linux/390 doesn't require to probe for free (not armed) interrupt request lines (IRQs) to drive its devices with. Where -applicable, the device drivers can use the read_dev_chars() to retrieve device -characteristics. This can be done without having to request device ownership -previously. +applicable, the device drivers can use issue the READ DEVICE CHARACTERISTICS +ccw to retrieve device characteristics in its online routine. In order to allow for easy I/O initiation the CDS layer provides a ccw_device_start() interface that takes a device specific channel program (one @@ -170,69 +159,6 @@ SUBCHANNEL (HSCH) command without having pending I/O requests. This function is also covered by ccw_device_halt(). -read_dev_chars() - Read Device Characteristics - -This routine returns the characteristics for the device specified. - -The function is meant to be called with the device already enabled; that is, -at earliest during set_online() processing. - -The ccw_device must not be locked prior to calling read_dev_chars(). - -The function may be called enabled or disabled. - -int read_dev_chars(struct ccw_device *cdev, void **buffer, int length ); - -cdev - the ccw_device the information is requested for. -buffer - pointer to a buffer pointer. The buffer pointer itself - must contain a valid buffer area. -length - length of the buffer provided. - -The read_dev_chars() function returns : - - 0 - successful completion --ENODEV - cdev invalid --EINVAL - an invalid parameter was detected, or the function was called early. --EBUSY - an irrecoverable I/O error occurred or the device is not - operational. - - -read_conf_data(), read_conf_data_lpm() - Read Configuration Data - -Retrieve the device dependent configuration data. Please have a look at your -device dependent I/O commands for the device specific layout of the node -descriptor elements. read_conf_data_lpm() will retrieve the configuration data -for a specific path. - -The function is meant to be called with the device already enabled; that is, -at earliest during set_online() processing. - -The function may be called enabled or disabled, but the device must not be -locked - -int read_conf_data(struct ccw_device, void **buffer, int *length); -int read_conf_data_lpm(struct ccw_device, void **buffer, int *length, __u8 lpm); - -cdev - the ccw_device the data is requested for. -buffer - Pointer to a buffer pointer. The read_conf_data() routine - will allocate a buffer and initialize the buffer pointer - accordingly. It's the device driver's responsibility to - release the kernel memory if no longer needed. -length - Length of the buffer allocated and retrieved. -lpm - Logical path mask to be used for retrieving the data. If - zero the data is retrieved on the next path available. - -The read_conf_data() function returns : - 0 - Successful completion --ENODEV - cdev invalid. --EINVAL - An invalid parameter was detected, or the function was called early. --EIO - An irrecoverable I/O error occurred or the device is - not operational. --ENOMEM - The read_conf_data() routine couldn't obtain storage. --EOPNOTSUPP - The device doesn't support the read configuration - data command. - - get_ciw() - get command information word This call enables a device driver to get information about supported commands diff --git a/Documentation/spi/spi-summary b/Documentation/spi/spi-summary index 795fbb48ffa7f0..76ea6c837be568 100644 --- a/Documentation/spi/spi-summary +++ b/Documentation/spi/spi-summary @@ -1,26 +1,30 @@ Overview of Linux kernel SPI support ==================================== -02-Dec-2005 +21-May-2007 What is SPI? ------------ The "Serial Peripheral Interface" (SPI) is a synchronous four wire serial link used to connect microcontrollers to sensors, memory, and peripherals. +It's a simple "de facto" standard, not complicated enough to acquire a +standardization body. SPI uses a master/slave configuration. The three signal wires hold a clock (SCK, often on the order of 10 MHz), and parallel data lines with "Master Out, Slave In" (MOSI) or "Master In, Slave Out" (MISO) signals. (Other names are also used.) There are four clocking modes through which data is exchanged; mode-0 and mode-3 are most commonly used. Each clock cycle shifts data out and data in; the clock -doesn't cycle except when there is data to shift. +doesn't cycle except when there is a data bit to shift. Not all data bits +are used though; not every protocol uses those full duplex capabilities. -SPI masters may use a "chip select" line to activate a given SPI slave +SPI masters use a fourth "chip select" line to activate a given SPI slave device, so those three signal wires may be connected to several chips -in parallel. All SPI slaves support chipselects. Some devices have +in parallel. All SPI slaves support chipselects; they are usually active +low signals, labeled nCSx for slave 'x' (e.g. nCS0). Some devices have other signals, often including an interrupt to the master. -Unlike serial busses like USB or SMBUS, even low level protocols for +Unlike serial busses like USB or SMBus, even low level protocols for SPI slave functions are usually not interoperable between vendors (except for commodities like SPI memory chips). @@ -33,6 +37,11 @@ SPI slave functions are usually not interoperable between vendors - Some devices may use eight bit words. Others may different word lengths, such as streams of 12-bit or 20-bit digital samples. + - Words are usually sent with their most significant bit (MSB) first, + but sometimes the least significant bit (LSB) goes first instead. + + - Sometimes SPI is used to daisy-chain devices, like shift registers. + In the same way, SPI slaves will only rarely support any kind of automatic discovery/enumeration protocol. The tree of slave devices accessible from a given SPI master will normally be set up manually, with configuration @@ -44,6 +53,14 @@ half-duplex SPI, for request/response protocols), SSP ("Synchronous Serial Protocol"), PSP ("Programmable Serial Protocol"), and other related protocols. +Some chips eliminate a signal line by combining MOSI and MISO, and +limiting themselves to half-duplex at the hardware level. In fact +some SPI chips have this signal mode as a strapping option. These +can be accessed using the same programming interface as SPI, but of +course they won't handle full duplex transfers. You may find such +chips described as using "three wire" signaling: SCK, data, nCSx. +(That data line is sometimes called MOMI or SISO.) + Microcontrollers often support both master and slave sides of the SPI protocol. This document (and Linux) currently only supports the master side of SPI interactions. @@ -74,6 +91,32 @@ interfaces with SPI modes. Given SPI support, they could use MMC or SD cards without needing a special purpose MMC/SD/SDIO controller. +I'm confused. What are these four SPI "clock modes"? +----------------------------------------------------- +It's easy to be confused here, and the vendor documentation you'll +find isn't necessarily helpful. The four modes combine two mode bits: + + - CPOL indicates the initial clock polarity. CPOL=0 means the + clock starts low, so the first (leading) edge is rising, and + the second (trailing) edge is falling. CPOL=1 means the clock + starts high, so the first (leading) edge is falling. + + - CPHA indicates the clock phase used to sample data; CPHA=0 says + sample on the leading edge, CPHA=1 means the trailing edge. + + Since the signal needs to stablize before it's sampled, CPHA=0 + implies that its data is written half a clock before the first + clock edge. The chipselect may have made it become available. + +Chip specs won't always say "uses SPI mode X" in as many words, +but their timing diagrams will make the CPOL and CPHA modes clear. + +In the SPI mode number, CPOL is the high order bit and CPHA is the +low order bit. So when a chip's timing diagram shows the clock +starting low (CPOL=0) and data stabilized for sampling during the +trailing clock edge (CPHA=1), that's SPI mode 1. + + How do these driver programming interfaces work? ------------------------------------------------ The <linux/spi/spi.h> header file includes kerneldoc, as does the diff --git a/Documentation/vm/slabinfo.c b/Documentation/vm/slabinfo.c index 686a8e04a4f3c3..d4f21ffd14041b 100644 --- a/Documentation/vm/slabinfo.c +++ b/Documentation/vm/slabinfo.c @@ -242,6 +242,9 @@ void decode_numa_list(int *numa, char *t) memset(numa, 0, MAX_NODES * sizeof(int)); + if (!t) + return; + while (*t == 'N') { t++; node = strtoul(t, &t, 10); @@ -259,11 +262,17 @@ void decode_numa_list(int *numa, char *t) void slab_validate(struct slabinfo *s) { + if (strcmp(s->name, "*") == 0) + return; + set_obj(s, "validate", 1); } void slab_shrink(struct slabinfo *s) { + if (strcmp(s->name, "*") == 0) + return; + set_obj(s, "shrink", 1); } @@ -386,7 +395,9 @@ void report(struct slabinfo *s) { if (strcmp(s->name, "*") == 0) return; - printf("\nSlabcache: %-20s Aliases: %2d Order : %2d\n", s->name, s->aliases, s->order); + + printf("\nSlabcache: %-20s Aliases: %2d Order : %2d Objects: %d\n", + s->name, s->aliases, s->order, s->objects); if (s->hwcache_align) printf("** Hardware cacheline aligned\n"); if (s->cache_dma) @@ -545,6 +556,9 @@ int slab_empty(struct slabinfo *s) void slab_debug(struct slabinfo *s) { + if (strcmp(s->name, "*") == 0) + return; + if (sanity && !s->sanity_checks) { set_obj(s, "sanity", 1); } @@ -791,11 +805,11 @@ void totals(void) store_size(b1, total_size);store_size(b2, total_waste); store_size(b3, total_waste * 100 / total_used); - printf("Memory used: %6s # Loss : %6s MRatio: %6s%%\n", b1, b2, b3); + printf("Memory used: %6s # Loss : %6s MRatio:%6s%%\n", b1, b2, b3); store_size(b1, total_objects);store_size(b2, total_partobj); store_size(b3, total_partobj * 100 / total_objects); - printf("# Objects : %6s # PartObj: %6s ORatio: %6s%%\n", b1, b2, b3); + printf("# Objects : %6s # PartObj: %6s ORatio:%6s%%\n", b1, b2, b3); printf("\n"); printf("Per Cache Average Min Max Total\n"); @@ -818,7 +832,7 @@ void totals(void) store_size(b1, avg_ppart);store_size(b2, min_ppart); store_size(b3, max_ppart); store_size(b4, total_partial * 100 / total_slabs); - printf("%%PartSlab %10s%% %10s%% %10s%% %10s%%\n", + printf("%%PartSlab%10s%% %10s%% %10s%% %10s%%\n", b1, b2, b3, b4); store_size(b1, avg_partobj);store_size(b2, min_partobj); @@ -830,7 +844,7 @@ void totals(void) store_size(b1, avg_ppartobj);store_size(b2, min_ppartobj); store_size(b3, max_ppartobj); store_size(b4, total_partobj * 100 / total_objects); - printf("%% PartObj %10s%% %10s%% %10s%% %10s%%\n", + printf("%% PartObj%10s%% %10s%% %10s%% %10s%%\n", b1, b2, b3, b4); store_size(b1, avg_size);store_size(b2, min_size); @@ -1100,6 +1114,8 @@ void output_slabs(void) ops(slab); else if (show_slab) slabcache(slab); + else if (show_report) + report(slab); } } diff --git a/MAINTAINERS b/MAINTAINERS index bbeb5b6b5b05bf..4cc17b993b6a4d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -332,6 +332,9 @@ L: linux-usb-devel@lists.sourceforge.net W: http://www.linux-usb.org/SpeedTouch/ S: Maintained +ALCHEMY AU1XX0 MMC DRIVER +S: Orphan + ALI1563 I2C DRIVER P: Rudolf Marek M: r.marek@assembler.cz @@ -418,6 +421,12 @@ P: Ian Molton M: spyro@f2s.com S: Maintained +ARM PRIMECELL MMCI PL180/1 DRIVER +P: Russell King +M: rmk@arm.linux.org.uk +L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) +S: Maintained + ARM/ADI ROADRUNNER MACHINE SUPPORT P: Lennert Buytenhek M: kernel@wantstofly.org @@ -649,6 +658,9 @@ L: linux-atm-general@lists.sourceforge.net (subscribers-only) W: http://linux-atm.sourceforge.net S: Maintained +ATMEL AT91 MCI DRIVER +S: Orphan + ATMEL MACB ETHERNET DRIVER P: Haavard Skinnemoen M: hskinnemoen@atmel.com @@ -2231,11 +2243,11 @@ M: khali@linux-fr.org L: lm-sensors@lm-sensors.org S: Maintained -LOGICAL DISK MANAGER SUPPORT (LDM, Windows 2000/XP Dynamic Disks) +LOGICAL DISK MANAGER SUPPORT (LDM, Windows 2000/XP/Vista Dynamic Disks) P: Richard Russon (FlatCap) M: ldm@flatcap.org -L: ldm-devel@lists.sourceforge.net -W: http://ldm.sourceforge.net +L: linux-ntfs-dev@lists.sourceforge.net +W: http://www.linux-ntfs.org/content/view/19/37/ S: Maintained LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI) @@ -2322,7 +2334,7 @@ S: Maintained MEGARAID SCSI DRIVERS P: Neela Syam Kolli -M: Neela.Kolli@engenio.com +M: megaraidlinux@lsi.com S: linux-scsi@vger.kernel.org W: http://megaraid.lsilogic.com S: Maintained @@ -2380,6 +2392,13 @@ M: stelian@popies.net W: http://popies.net/meye/ S: Maintained +MOTOROLA IMX MMC/SD HOST CONTROLLER INTERFACE DRIVER +P: Pavel Pisa +M: ppisa@pikron.com +L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) +W: http://mmc.drzeus.cx/wiki/Controllers/Freescale/SDHC +S: Maintained + MOUSE AND MISC DEVICES [GENERAL] P: Alessandro Rubini M: rubini@ipvvis.unipv.it @@ -2689,13 +2708,13 @@ L: i2c@lm-sensors.org S: Maintained PARALLEL PORT SUPPORT -L: linux-parport@lists.infradead.org +L: linux-parport@lists.infradead.org (subscribers-only) S: Orphan PARIDE DRIVERS FOR PARALLEL PORT IDE DEVICES P: Tim Waugh M: tim@cyberelk.net -L: linux-parport@lists.infradead.org +L: linux-parport@lists.infradead.org (subscribers-only) W: http://www.torque.net/linux-pp.html S: Maintained @@ -2900,6 +2919,9 @@ M: nico@cam.org L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) S: Maintained +PXA MMCI DRIVER +S: Orphan + QLOGIC QLA2XXX FC-SCSI DRIVER P: Andrew Vasquez M: linux-driver@qlogic.com @@ -3416,6 +3438,13 @@ P: Alex Dubov M: oakad@yahoo.com S: Maintained +TI OMAP MMC INTERFACE DRIVER +P: Carlos Aguiar, Anderson Briglia and Syed Khasim +M: linux-omap-open-source@linux.omap.com +W: http://linux.omap.com +W: http://www.muru.com/linux/omap/ +S: Maintained + TI OMAP RANDOM NUMBER GENERATOR SUPPORT P: Deepak Saxena M: dsaxena@plexity.net diff --git a/Makefile b/Makefile index e6990e2cdafcf8..562a90902cf698 100644 --- a/Makefile +++ b/Makefile @@ -1,8 +1,8 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 22 -EXTRAVERSION = -rc1 -NAME = Nocturnal Monster Puppy +EXTRAVERSION = -rc3 +NAME = Jeff Thinks I Should Change This, But To What? # *DOCUMENTATION* # To see a list of typical targets execute "make help" @@ -491,7 +491,7 @@ endif include $(srctree)/arch/$(ARCH)/Makefile ifdef CONFIG_FRAME_POINTER -CFLAGS += -fno-omit-frame-pointer -fno-optimize-sibling-calls +CFLAGS += -fno-omit-frame-pointer $(call cc-option,-fno-optimize-sibling-calls,) else CFLAGS += -fomit-frame-pointer endif diff --git a/arch/alpha/kernel/entry.S b/arch/alpha/kernel/entry.S index c95e95e1ab0423..debc8f03886cf9 100644 --- a/arch/alpha/kernel/entry.S +++ b/arch/alpha/kernel/entry.S @@ -391,11 +391,10 @@ $work_resched: bne $2, $work_resched $work_notifysig: - mov $sp, $17 + mov $sp, $16 br $1, do_switch_stack - mov $5, $21 - mov $sp, $18 - mov $31, $16 + mov $sp, $17 + mov $5, $18 jsr $26, do_notify_resume bsr $1, undo_switch_stack br restore_all diff --git a/arch/alpha/kernel/pci_iommu.c b/arch/alpha/kernel/pci_iommu.c index 6e7d1fe6e93532..28c84e55feb9b8 100644 --- a/arch/alpha/kernel/pci_iommu.c +++ b/arch/alpha/kernel/pci_iommu.c @@ -7,6 +7,7 @@ #include <linux/pci.h> #include <linux/slab.h> #include <linux/bootmem.h> +#include <linux/log2.h> #include <asm/io.h> #include <asm/hwrpb.h> @@ -53,7 +54,7 @@ size_for_memory(unsigned long max) { unsigned long mem = max_low_pfn << PAGE_SHIFT; if (mem < max) - max = 1UL << ceil_log2(mem); + max = roundup_pow_of_two(mem); return max; } diff --git a/arch/alpha/kernel/setup.c b/arch/alpha/kernel/setup.c index 915f26345c45c9..bd5e68cd61e84f 100644 --- a/arch/alpha/kernel/setup.c +++ b/arch/alpha/kernel/setup.c @@ -43,6 +43,7 @@ #include <linux/notifier.h> #include <asm/setup.h> #include <asm/io.h> +#include <linux/log2.h> extern struct atomic_notifier_head panic_notifier_list; static int alpha_panic_event(struct notifier_block *, unsigned long, void *); @@ -1303,7 +1304,7 @@ external_cache_probe(int minsize, int width) long size = minsize, maxsize = MAX_BCACHE_SIZE * 2; if (maxsize > (max_low_pfn + 1) << PAGE_SHIFT) - maxsize = 1 << (floor_log2(max_low_pfn + 1) + PAGE_SHIFT); + maxsize = 1 << (ilog2(max_low_pfn + 1) + PAGE_SHIFT); /* Get the first block cached. */ read_mem_block(__va(0), stride, size); diff --git a/arch/alpha/kernel/signal.c b/arch/alpha/kernel/signal.c index 7f64aa767d5a2f..410af4f3140e3c 100644 --- a/arch/alpha/kernel/signal.c +++ b/arch/alpha/kernel/signal.c @@ -32,8 +32,8 @@ #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) asmlinkage void ret_from_sys_call(void); -static int do_signal(sigset_t *, struct pt_regs *, struct switch_stack *, - unsigned long, unsigned long); +static void do_signal(struct pt_regs *, struct switch_stack *, + unsigned long, unsigned long); /* @@ -146,11 +146,9 @@ sys_rt_sigaction(int sig, const struct sigaction __user *act, asmlinkage int do_sigsuspend(old_sigset_t mask, struct pt_regs *regs, struct switch_stack *sw) { - sigset_t oldset; - mask &= _BLOCKABLE; spin_lock_irq(¤t->sighand->siglock); - oldset = current->blocked; + current->saved_sigmask = current->blocked; siginitset(¤t->blocked, mask); recalc_sigpending(); spin_unlock_irq(¤t->sighand->siglock); @@ -160,19 +158,17 @@ do_sigsuspend(old_sigset_t mask, struct pt_regs *regs, struct switch_stack *sw) regs->r0 = EINTR; regs->r19 = 1; - while (1) { - current->state = TASK_INTERRUPTIBLE; - schedule(); - if (do_signal(&oldset, regs, sw, 0, 0)) - return -EINTR; - } + current->state = TASK_INTERRUPTIBLE; + schedule(); + set_thread_flag(TIF_RESTORE_SIGMASK); + return -ERESTARTNOHAND; } asmlinkage int do_rt_sigsuspend(sigset_t __user *uset, size_t sigsetsize, struct pt_regs *regs, struct switch_stack *sw) { - sigset_t oldset, set; + sigset_t set; /* XXX: Don't preclude handling different sized sigset_t's. */ if (sigsetsize != sizeof(sigset_t)) @@ -182,7 +178,7 @@ do_rt_sigsuspend(sigset_t __user *uset, size_t sigsetsize, sigdelsetmask(&set, ~_BLOCKABLE); spin_lock_irq(¤t->sighand->siglock); - oldset = current->blocked; + current->saved_sigmask = current->blocked; current->blocked = set; recalc_sigpending(); spin_unlock_irq(¤t->sighand->siglock); @@ -192,12 +188,10 @@ do_rt_sigsuspend(sigset_t __user *uset, size_t sigsetsize, regs->r0 = EINTR; regs->r19 = 1; - while (1) { - current->state = TASK_INTERRUPTIBLE; - schedule(); - if (do_signal(&oldset, regs, sw, 0, 0)) - return -EINTR; - } + current->state = TASK_INTERRUPTIBLE; + schedule(); + set_thread_flag(TIF_RESTORE_SIGMASK); + return -ERESTARTNOHAND; } asmlinkage int @@ -436,7 +430,7 @@ setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, return err; } -static void +static int setup_frame(int sig, struct k_sigaction *ka, sigset_t *set, struct pt_regs *regs, struct switch_stack * sw) { @@ -481,13 +475,14 @@ setup_frame(int sig, struct k_sigaction *ka, sigset_t *set, current->comm, current->pid, frame, regs->pc, regs->r26); #endif - return; + return 0; give_sigsegv: force_sigsegv(sig, current); + return -EFAULT; } -static void +static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, sigset_t *set, struct pt_regs *regs, struct switch_stack * sw) { @@ -543,34 +538,38 @@ setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, current->comm, current->pid, frame, regs->pc, regs->r26); #endif - return; + return 0; give_sigsegv: force_sigsegv(sig, current); + return -EFAULT; } /* * OK, we're invoking a handler. */ -static inline void +static inline int handle_signal(int sig, struct k_sigaction *ka, siginfo_t *info, sigset_t *oldset, struct pt_regs * regs, struct switch_stack *sw) { + int ret; + if (ka->sa.sa_flags & SA_SIGINFO) - setup_rt_frame(sig, ka, info, oldset, regs, sw); + ret = setup_rt_frame(sig, ka, info, oldset, regs, sw); else - setup_frame(sig, ka, oldset, regs, sw); + ret = setup_frame(sig, ka, oldset, regs, sw); - if (ka->sa.sa_flags & SA_RESETHAND) - ka->sa.sa_handler = SIG_DFL; + if (ret == 0) { + spin_lock_irq(¤t->sighand->siglock); + sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); + if (!(ka->sa.sa_flags & SA_NODEFER)) + sigaddset(¤t->blocked,sig); + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); + } - spin_lock_irq(¤t->sighand->siglock); - sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); - if (!(ka->sa.sa_flags & SA_NODEFER)) - sigaddset(¤t->blocked,sig); - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); + return ret; } static inline void @@ -611,30 +610,42 @@ syscall_restart(unsigned long r0, unsigned long r19, * restart. "r0" is also used as an indicator whether we can restart at * all (if we get here from anything but a syscall return, it will be 0) */ -static int -do_signal(sigset_t *oldset, struct pt_regs * regs, struct switch_stack * sw, +static void +do_signal(struct pt_regs * regs, struct switch_stack * sw, unsigned long r0, unsigned long r19) { siginfo_t info; int signr; unsigned long single_stepping = ptrace_cancel_bpt(current); struct k_sigaction ka; + sigset_t *oldset; - if (!oldset) + if (test_thread_flag(TIF_RESTORE_SIGMASK)) + oldset = ¤t->saved_sigmask; + else oldset = ¤t->blocked; /* This lets the debugger run, ... */ signr = get_signal_to_deliver(&info, &ka, regs, NULL); + /* ... so re-check the single stepping. */ single_stepping |= ptrace_cancel_bpt(current); if (signr > 0) { /* Whee! Actually deliver the signal. */ - if (r0) syscall_restart(r0, r19, regs, &ka); - handle_signal(signr, &ka, &info, oldset, regs, sw); + if (r0) + syscall_restart(r0, r19, regs, &ka); + if (handle_signal(signr, &ka, &info, oldset, regs, sw) == 0) { + /* A signal was successfully delivered, and the + saved sigmask was stored on the signal frame, + and will be restored by sigreturn. So we can + simply clear the restore sigmask flag. */ + if (test_thread_flag(TIF_RESTORE_SIGMASK)) + clear_thread_flag(TIF_RESTORE_SIGMASK); + } if (single_stepping) ptrace_set_bpt(current); /* re-set bpt */ - return 1; + return; } if (r0) { @@ -654,17 +665,22 @@ do_signal(sigset_t *oldset, struct pt_regs * regs, struct switch_stack * sw, break; } } + + /* If there's no signal to deliver, we just restore the saved mask. */ + if (test_thread_flag(TIF_RESTORE_SIGMASK)) { + clear_thread_flag(TIF_RESTORE_SIGMASK); + sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL); + } + if (single_stepping) ptrace_set_bpt(current); /* re-set breakpoint */ - - return 0; } void -do_notify_resume(sigset_t *oldset, struct pt_regs *regs, - struct switch_stack *sw, unsigned long r0, - unsigned long r19, unsigned long thread_info_flags) +do_notify_resume(struct pt_regs *regs, struct switch_stack *sw, + unsigned long thread_info_flags, + unsigned long r0, unsigned long r19) { - if (thread_info_flags & _TIF_SIGPENDING) - do_signal(oldset, regs, sw, r0, r19); + if (thread_info_flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK)) + do_signal(regs, sw, r0, r19); } diff --git a/arch/alpha/kernel/systbls.S b/arch/alpha/kernel/systbls.S index f6cfe8ce3f966b..79de99e32c35f9 100644 --- a/arch/alpha/kernel/systbls.S +++ b/arch/alpha/kernel/systbls.S @@ -465,6 +465,38 @@ sys_call_table: .quad sys_inotify_init .quad sys_inotify_add_watch /* 445 */ .quad sys_inotify_rm_watch + .quad sys_fdatasync + .quad sys_kexec_load + .quad sys_migrate_pages + .quad sys_openat /* 450 */ + .quad sys_mkdirat + .quad sys_mknodat + .quad sys_fchownat + .quad sys_futimesat + .quad sys_fstatat64 /* 455 */ + .quad sys_unlinkat + .quad sys_renameat + .quad sys_linkat + .quad sys_symlinkat + .quad sys_readlinkat /* 460 */ + .quad sys_fchmodat + .quad sys_faccessat + .quad sys_pselect6 + .quad sys_ppoll + .quad sys_unshare /* 465 */ + .quad sys_set_robust_list + .quad sys_get_robust_list + .quad sys_splice + .quad sys_sync_file_range + .quad sys_tee /* 470 */ + .quad sys_vmsplice + .quad sys_move_pages + .quad sys_getcpu + .quad sys_epoll_pwait + .quad sys_utimensat /* 475 */ + .quad sys_signalfd + .quad sys_timerfd + .quad sys_eventfd .size sys_call_table, . - sys_call_table .type sys_call_table, @object diff --git a/arch/alpha/kernel/vmlinux.lds.S b/arch/alpha/kernel/vmlinux.lds.S index cf1e6fc6c6869b..449e76f118d307 100644 --- a/arch/alpha/kernel/vmlinux.lds.S +++ b/arch/alpha/kernel/vmlinux.lds.S @@ -15,7 +15,7 @@ SECTIONS _text = .; /* Text and read-only data */ .text : { - *(.text) + TEXT_TEXT SCHED_TEXT LOCK_TEXT *(.fixup) @@ -89,7 +89,7 @@ SECTIONS _data = .; .data : { /* Data */ - *(.data) + DATA_DATA CONSTRUCTORS } diff --git a/arch/alpha/lib/Makefile b/arch/alpha/lib/Makefile index ea098f3b629f16..266f78e130766f 100644 --- a/arch/alpha/lib/Makefile +++ b/arch/alpha/lib/Makefile @@ -37,7 +37,8 @@ lib-y = __divqu.o __remqu.o __divlu.o __remlu.o \ $(ev6-y)clear_page.o \ $(ev6-y)copy_page.o \ fpreg.o \ - callback_srm.o srm_puts.o srm_printk.o + callback_srm.o srm_puts.o srm_printk.o \ + fls.o lib-$(CONFIG_SMP) += dec_and_lock.o diff --git a/arch/alpha/lib/fls.c b/arch/alpha/lib/fls.c new file mode 100644 index 00000000000000..7ad84ea0acf879 --- /dev/null +++ b/arch/alpha/lib/fls.c @@ -0,0 +1,38 @@ +/* + * arch/alpha/lib/fls.c + */ + +#include <linux/module.h> +#include <asm/bitops.h> + +/* This is fls(x)-1, except zero is held to zero. This allows most + efficent input into extbl, plus it allows easy handling of fls(0)=0. */ + +const unsigned char __flsm1_tab[256] = +{ + 0, + 0, + 1, 1, + 2, 2, 2, 2, + 3, 3, 3, 3, 3, 3, 3, 3, + 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, + + 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, + 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, + + 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, + 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, + 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, + 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, + + 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, + 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, + 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, + 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, + 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, + 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, + 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, + 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, +}; + +EXPORT_SYMBOL(__flsm1_tab); diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index e55bbd32dcac38..50d9f3e4e0f1ad 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -287,6 +287,7 @@ config ARCH_IXP2000 config ARCH_IXP4XX bool "IXP4xx-based" depends on MMU + select GENERIC_GPIO select GENERIC_TIME select GENERIC_CLOCKEVENTS help diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c index 6fbe7722aa4408..b36b1e8a105d39 100644 --- a/arch/arm/common/dmabounce.c +++ b/arch/arm/common/dmabounce.c @@ -6,7 +6,7 @@ * copy data to/from buffers located outside the DMA region. This * only works for systems in which DMA memory is at the bottom of * RAM, the remainder of memory is at the top and the DMA memory - * can be marked as ZONE_DMA. Anything beyond that such as discontigous + * can be marked as ZONE_DMA. Anything beyond that such as discontiguous * DMA windows will require custom implementations that reserve memory * areas at early bootup. * diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c index 4deece5fbdf467..0c89bd35e06fb4 100644 --- a/arch/arm/common/gic.c +++ b/arch/arm/common/gic.c @@ -72,7 +72,7 @@ static inline unsigned int gic_irq(unsigned int irq) * unmask it, in the same way we need to unmask an interrupt when * we first enable it. * - * The GIC has a seperate notion of "end of interrupt" to re-enable + * The GIC has a separate notion of "end of interrupt" to re-enable * an interrupt after handling, in order to support hardware * prioritisation. * @@ -125,12 +125,11 @@ static void gic_set_cpu(unsigned int irq, cpumask_t mask_val) } #endif -static void fastcall gic_handle_cascade_irq(unsigned int irq, - struct irq_desc *desc) +static void gic_handle_cascade_irq(unsigned int irq, struct irq_desc *desc) { struct gic_chip_data *chip_data = get_irq_data(irq); struct irq_chip *chip = get_irq_chip(irq); - unsigned int cascade_irq; + unsigned int cascade_irq, gic_irq; unsigned long status; /* primary controller ack'ing */ @@ -140,16 +139,15 @@ static void fastcall gic_handle_cascade_irq(unsigned int irq, status = readl(chip_data->cpu_base + GIC_CPU_INTACK); spin_unlock(&irq_controller_lock); - cascade_irq = (status & 0x3ff); - if (cascade_irq > 1020) + gic_irq = (status & 0x3ff); + if (gic_irq == 1023) goto out; - if (cascade_irq < 32 || cascade_irq >= NR_IRQS) { - do_bad_IRQ(cascade_irq, desc); - goto out; - } - cascade_irq += chip_data->irq_offset; - generic_handle_irq(cascade_irq); + cascade_irq = gic_irq + chip_data->irq_offset; + if (unlikely(gic_irq < 32 || gic_irq > 1020 || cascade_irq >= NR_IRQS)) + do_bad_IRQ(cascade_irq, desc); + else + generic_handle_irq(cascade_irq); out: /* primary controller unmasking */ diff --git a/arch/arm/common/sharpsl_param.c b/arch/arm/common/sharpsl_param.c index c94864c5b1af56..aad4d94ba8f506 100644 --- a/arch/arm/common/sharpsl_param.c +++ b/arch/arm/common/sharpsl_param.c @@ -20,7 +20,7 @@ * typically including LCD parameters are loaded by the bootloader at the * address PARAM_BASE. As the kernel will overwrite them, we need to store * them early in the boot process, then pass them to the appropriate drivers. - * Not all devices use all paramaters but the format is common to all. + * Not all devices use all parameters but the format is common to all. */ #ifdef CONFIG_ARCH_SA1100 #define PARAM_BASE 0xe8ffc000 diff --git a/arch/arm/common/sharpsl_pm.c b/arch/arm/common/sharpsl_pm.c index 5972df2b9af479..3bf3a927ae22fb 100644 --- a/arch/arm/common/sharpsl_pm.c +++ b/arch/arm/common/sharpsl_pm.c @@ -153,7 +153,7 @@ static void sharpsl_battery_thread(struct work_struct *private_) sharpsl_pm.battstat.mainbat_percent = percent; } - dev_dbg(sharpsl_pm.dev, "Battery: voltage: %d, status: %d, percentage: %d, time: %d\n", voltage, + dev_dbg(sharpsl_pm.dev, "Battery: voltage: %d, status: %d, percentage: %d, time: %ld\n", voltage, sharpsl_pm.battstat.mainbat_status, sharpsl_pm.battstat.mainbat_percent, jiffies); /* If battery is low. limit backlight intensity to save power. */ @@ -291,7 +291,7 @@ static void sharpsl_chrg_full_timer(unsigned long data) } /* Charging Finished Interrupt (Not present on Corgi) */ -/* Can trigger at the same time as an AC staus change so +/* Can trigger at the same time as an AC status change so delay until after that has been processed */ irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id) { @@ -625,7 +625,7 @@ static int sharpsl_fatal_check(void) } temp = get_select_val(buff); - dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check: acin: %d, discharge voltage: %d, no discharge: %d\n", acin, temp, sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT)); + dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check: acin: %d, discharge voltage: %d, no discharge: %ld\n", acin, temp, sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT)); if ((acin && (temp < sharpsl_pm.machinfo->fatal_acin_volt)) || (!acin && (temp < sharpsl_pm.machinfo->fatal_noacin_volt))) @@ -635,7 +635,7 @@ static int sharpsl_fatal_check(void) static int sharpsl_off_charge_error(void) { - dev_err(sharpsl_pm.dev, "Offline Charger: Error occured.\n"); + dev_err(sharpsl_pm.dev, "Offline Charger: Error occurred.\n"); sharpsl_pm.machinfo->charge(0); sharpsl_pm_led(SHARPSL_LED_ERROR); sharpsl_pm.charge_mode = CHRG_ERROR; @@ -691,14 +691,14 @@ static int sharpsl_off_charge_battery(void) time = RCNR; while(1) { - /* Check if any wakeup event had occured */ + /* Check if any wakeup event had occurred */ if (sharpsl_pm.machinfo->charger_wakeup() != 0) return 0; /* Check for timeout */ if ((RCNR - time) > SHARPSL_WAIT_CO_TIME) return 1; if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL)) { - dev_dbg(sharpsl_pm.dev, "Offline Charger: Charge full occured. Retrying to check\n"); + dev_dbg(sharpsl_pm.dev, "Offline Charger: Charge full occurred. Retrying to check\n"); sharpsl_pm.full_count++; sharpsl_pm.machinfo->charge(0); mdelay(SHARPSL_CHARGE_WAIT_TIME); @@ -714,7 +714,7 @@ static int sharpsl_off_charge_battery(void) time = RCNR; while(1) { - /* Check if any wakeup event had occured */ + /* Check if any wakeup event had occurred */ if (sharpsl_pm.machinfo->charger_wakeup() != 0) return 0; /* Check for timeout */ @@ -774,6 +774,8 @@ static struct pm_ops sharpsl_pm_ops = { static int __init sharpsl_pm_probe(struct platform_device *pdev) { + int ret; + if (!pdev->dev.platform_data) return -EINVAL; @@ -792,8 +794,10 @@ static int __init sharpsl_pm_probe(struct platform_device *pdev) sharpsl_pm.machinfo->init(); - device_create_file(&pdev->dev, &dev_attr_battery_percentage); - device_create_file(&pdev->dev, &dev_attr_battery_voltage); + ret = device_create_file(&pdev->dev, &dev_attr_battery_percentage); + ret |= device_create_file(&pdev->dev, &dev_attr_battery_voltage); + if (ret != 0) + dev_warn(&pdev->dev, "Failed to register attributes (%d)\n", ret); apm_get_power_status = sharpsl_apm_get_power_status; diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c index 9179e82203142b..f73d62e8ab6064 100644 --- a/arch/arm/kernel/armksyms.c +++ b/arch/arm/kernel/armksyms.c @@ -57,7 +57,7 @@ extern void fp_enter(void); #define EXPORT_SYMBOL_ALIAS(sym,orig) \ EXPORT_CRC_ALIAS(sym) \ static const struct kernel_symbol __ksymtab_##sym \ - __attribute_used__ __attribute__((section("__ksymtab"))) = \ + __used __attribute__((section("__ksymtab"))) = \ { (unsigned long)&orig, #sym }; /* diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c index 3c078e3467537f..3278e713c32a10 100644 --- a/arch/arm/kernel/asm-offsets.c +++ b/arch/arm/kernel/asm-offsets.c @@ -85,7 +85,7 @@ int main(void) DEFINE(S_OLD_R0, offsetof(struct pt_regs, ARM_ORIG_r0)); DEFINE(S_FRAME_SIZE, sizeof(struct pt_regs)); BLANK(); -#if __LINUX_ARM_ARCH__ >= 6 +#ifdef CONFIG_CPU_HAS_ASID DEFINE(MM_CONTEXT_ID, offsetof(struct mm_struct, context.id)); BLANK(); #endif diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S index ae89cdd82b1677..19326d7cdeb3cd 100644 --- a/arch/arm/kernel/calls.S +++ b/arch/arm/kernel/calls.S @@ -357,6 +357,10 @@ /* 345 */ CALL(sys_getcpu) CALL(sys_ni_syscall) /* eventually epoll_pwait */ CALL(sys_kexec_load) + CALL(sys_utimensat) + CALL(sys_signalfd) +/* 350 */ CALL(sys_timerfd) + CALL(sys_eventfd) #ifndef syscalls_counted .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls #define syscalls_counted diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 0453dcc757b40d..650eac1bc0a6f2 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -918,7 +918,7 @@ static int c_show(struct seq_file *m, void *v) if ((processor_id & 0x0008f000) == 0x00000000) { /* pre-ARM7 */ - seq_printf(m, "CPU part\t\t: %07x\n", processor_id >> 4); + seq_printf(m, "CPU part\t: %07x\n", processor_id >> 4); } else { if ((processor_id & 0x0008f000) == 0x00007000) { /* ARM7 */ diff --git a/arch/arm/kernel/stacktrace.c b/arch/arm/kernel/stacktrace.c index 8b63ad89d0a815..ae31deb2d0653a 100644 --- a/arch/arm/kernel/stacktrace.c +++ b/arch/arm/kernel/stacktrace.c @@ -13,7 +13,7 @@ int walk_stackframe(unsigned long fp, unsigned long low, unsigned long high, /* * Check current frame pointer is within bounds */ - if ((fp - 12) < low || fp + 4 >= high) + if (fp < (low + 12) || fp + 4 >= high) break; frame = (struct stackframe *)(fp - 12); diff --git a/arch/arm/kernel/sys_arm.c b/arch/arm/kernel/sys_arm.c index 3d4fcbc162769b..1ca2d5174fcb69 100644 --- a/arch/arm/kernel/sys_arm.c +++ b/arch/arm/kernel/sys_arm.c @@ -320,7 +320,7 @@ int kernel_execve(const char *filename, char *const argv[], char *const envp[]) EXPORT_SYMBOL(kernel_execve); /* - * Since loff_t is a 64 bit type we avoid a lot of ABI hastle + * Since loff_t is a 64 bit type we avoid a lot of ABI hassle * with a different argument ordering. */ asmlinkage long sys_arm_fadvise64_64(int fd, int advice, diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index e4156e7868ce59..2b7a8f5d8cf276 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -90,7 +90,7 @@ SECTIONS __exception_text_start = .; *(.exception.text) __exception_text_end = .; - *(.text) + TEXT_TEXT SCHED_TEXT LOCK_TEXT #ifdef CONFIG_MMU @@ -158,7 +158,7 @@ SECTIONS /* * and the usual data section */ - *(.data) + DATA_DATA CONSTRUCTORS _edata = .; diff --git a/arch/arm/lib/bitops.h b/arch/arm/lib/bitops.h index 54225102174469..2e787d40d59992 100644 --- a/arch/arm/lib/bitops.h +++ b/arch/arm/lib/bitops.h @@ -47,7 +47,7 @@ * @store: store instruction * * Note: we can trivially conditionalise the store instruction - * to avoid dirting the data cache. + * to avoid dirtying the data cache. */ .macro testop, instr, store add r1, r1, r0, lsr #3 diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c index b4518619063a2b..76ec856cd4f9fb 100644 --- a/arch/arm/mach-at91/board-carmeva.c +++ b/arch/arm/mach-at91/board-carmeva.c @@ -79,7 +79,7 @@ static struct at91_udc_data __initdata carmeva_udc_data = { .pullup_pin = AT91_PIN_PD9, }; -/* FIXME: user dependend */ +/* FIXME: user dependant */ // static struct at91_cf_data __initdata carmeva_cf_data = { // .det_pin = AT91_PIN_PB0, // .rst_pin = AT91_PIN_PC5, @@ -100,17 +100,17 @@ static struct spi_board_info carmeva_spi_devices[] = { .chip_select = 0, .max_speed_hz = 10 * 1000 * 1000, }, - { /* User accessable spi - cs1 (250KHz) */ + { /* User accessible spi - cs1 (250KHz) */ .modalias = "spi-cs1", .chip_select = 1, .max_speed_hz = 250 * 1000, }, - { /* User accessable spi - cs2 (1MHz) */ + { /* User accessible spi - cs2 (1MHz) */ .modalias = "spi-cs2", .chip_select = 2, .max_speed_hz = 1 * 1000 * 1000, }, - { /* User accessable spi - cs3 (10MHz) */ + { /* User accessible spi - cs3 (10MHz) */ .modalias = "spi-cs3", .chip_select = 3, .max_speed_hz = 10 * 1000 * 1000, diff --git a/arch/arm/mach-at91/board-dk.c b/arch/arm/mach-at91/board-dk.c index 6043c38c0a9e84..af497896a96ce7 100644 --- a/arch/arm/mach-at91/board-dk.c +++ b/arch/arm/mach-at91/board-dk.c @@ -132,7 +132,7 @@ static struct mtd_partition __initdata dk_nand_partition[] = { }, }; -static struct mtd_partition *nand_partitions(int size, int *num_partitions) +static struct mtd_partition * __init nand_partitions(int size, int *num_partitions) { *num_partitions = ARRAY_SIZE(dk_nand_partition); return dk_nand_partition; diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c index 76f6e1e553eaea..7d9b1a278fd63f 100644 --- a/arch/arm/mach-at91/board-kb9202.c +++ b/arch/arm/mach-at91/board-kb9202.c @@ -96,7 +96,7 @@ static struct mtd_partition __initdata kb9202_nand_partition[] = { }, }; -static struct mtd_partition *nand_partitions(int size, int *num_partitions) +static struct mtd_partition * __init nand_partitions(int size, int *num_partitions) { *num_partitions = ARRAY_SIZE(kb9202_nand_partition); return kb9202_nand_partition; diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index 1f0c8a400b3a6c..26ca8ab3f62a7d 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -178,7 +178,7 @@ static struct mtd_partition __initdata ek_nand_partition[] = { }, }; -static struct mtd_partition *nand_partitions(int size, int *num_partitions) +static struct mtd_partition * __init nand_partitions(int size, int *num_partitions) { *num_partitions = ARRAY_SIZE(ek_nand_partition); return ek_nand_partition; diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index f57458559fb66d..c164c8e58ae6a0 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -180,7 +180,7 @@ static struct mtd_partition __initdata ek_nand_partition[] = { }, }; -static struct mtd_partition *nand_partitions(int size, int *num_partitions) +static struct mtd_partition * __init nand_partitions(int size, int *num_partitions) { *num_partitions = ARRAY_SIZE(ek_nand_partition); return ek_nand_partition; diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c index 30c79aca84d420..9b61320f295aca 100644 --- a/arch/arm/mach-at91/board-sam9rlek.c +++ b/arch/arm/mach-at91/board-sam9rlek.c @@ -87,7 +87,7 @@ static struct mtd_partition __initdata ek_nand_partition[] = { }, }; -static struct mtd_partition *nand_partitions(int size, int *num_partitions) +static struct mtd_partition * __init nand_partitions(int size, int *num_partitions) { *num_partitions = ARRAY_SIZE(ek_nand_partition); return ek_nand_partition; diff --git a/arch/arm/mach-footbridge/cats-pci.c b/arch/arm/mach-footbridge/cats-pci.c index 4f984fde7375fc..35eb232a649a2b 100644 --- a/arch/arm/mach-footbridge/cats-pci.c +++ b/arch/arm/mach-footbridge/cats-pci.c @@ -45,7 +45,7 @@ static struct hw_pci cats_pci __initdata = { .postinit = dc21285_postinit, }; -static int cats_pci_init(void) +static int __init cats_pci_init(void) { if (machine_is_cats()) pci_common_init(&cats_pci); diff --git a/arch/arm/mach-h720x/cpu-h7202.c b/arch/arm/mach-h720x/cpu-h7202.c index 82e420d6fd197e..0a1a25fb8ba83b 100644 --- a/arch/arm/mach-h720x/cpu-h7202.c +++ b/arch/arm/mach-h720x/cpu-h7202.c @@ -143,7 +143,7 @@ h7202_timer_interrupt(int irq, void *dev_id) } /* - * mask multiplexed timer irq's + * mask multiplexed timer IRQs */ static void inline mask_timerx_irq (u32 irq) { @@ -153,7 +153,7 @@ static void inline mask_timerx_irq (u32 irq) } /* - * unmask multiplexed timer irq's + * unmask multiplexed timer IRQs */ static void inline unmask_timerx_irq (u32 irq) { diff --git a/arch/arm/mach-imx/cpufreq.c b/arch/arm/mach-imx/cpufreq.c index 7e70e0b0b9890a..467d899fbe755e 100644 --- a/arch/arm/mach-imx/cpufreq.c +++ b/arch/arm/mach-imx/cpufreq.c @@ -245,7 +245,7 @@ static int imx_set_target(struct cpufreq_policy *policy, if(mpctl0) { CSCR |= CSCR_MPLL_RESTART; - /* Wait until MPLL is stablized */ + /* Wait until MPLL is stabilized */ while( CSCR & CSCR_MPLL_RESTART ); imx_set_async_mode(); diff --git a/arch/arm/mach-imx/dma.c b/arch/arm/mach-imx/dma.c index 6d50d85a618ca3..bc6fb02d213bd6 100644 --- a/arch/arm/mach-imx/dma.c +++ b/arch/arm/mach-imx/dma.c @@ -131,7 +131,7 @@ imx_dma_setup_sg_base(imx_dmach_t dma_ch, * The function setups DMA channel source and destination addresses for transfer * specified by provided parameters. The scatter-gather emulation is disabled, * because linear data block - * form the physical address range is transfered. + * form the physical address range is transferred. * Return value: if incorrect parameters are provided -%EINVAL. * Zero indicates success. */ @@ -192,7 +192,7 @@ imx_dma_setup_single(imx_dmach_t dma_ch, dma_addr_t dma_address, * @dmamode: DMA transfer mode, %DMA_MODE_READ from the device to the memory * or %DMA_MODE_WRITE from memory to the device * - * The function setups DMA channel state and registers to be ready for transfer + * The function sets up DMA channel state and registers to be ready for transfer * specified by provided parameters. The scatter-gather emulation is set up * according to the parameters. * @@ -212,7 +212,7 @@ imx_dma_setup_single(imx_dmach_t dma_ch, dma_addr_t dma_address, * * %CCR_SMOD_LINEAR | %CCR_SSIZ_32 | %CCR_DMOD_FIFO | %CCR_DSIZ_x * - * Be carefull there and do not mistakenly mix source and target device + * Be careful here and do not mistakenly mix source and target device * port sizes constants, they are really different: * %CCR_SSIZ_8, %CCR_SSIZ_16, %CCR_SSIZ_32, * %CCR_DSIZ_8, %CCR_DSIZ_16, %CCR_DSIZ_32 @@ -495,7 +495,7 @@ static irqreturn_t dma_err_handler(int irq, void *dev_id) /* * The cleaning of @sg field would be questionable * there, because its value can help to compute - * remaining/transfered bytes count in the handler + * remaining/transferred bytes count in the handler */ /*imx_dma_channels[i].sg = NULL;*/ diff --git a/arch/arm/mach-imx/generic.c b/arch/arm/mach-imx/generic.c index 7a7fa51ec62c11..1c474cf709ca9b 100644 --- a/arch/arm/mach-imx/generic.c +++ b/arch/arm/mach-imx/generic.c @@ -201,7 +201,6 @@ void __init imx_set_mmc_info(struct imxmmc_platform_data *info) { imx_mmc_device.dev.platform_data = info; } -EXPORT_SYMBOL(imx_set_mmc_info); static struct imxfb_mach_info imx_fb_info; diff --git a/arch/arm/mach-integrator/Makefile b/arch/arm/mach-integrator/Makefile index ebb255bdce8aa7..158daaf9e3b03e 100644 --- a/arch/arm/mach-integrator/Makefile +++ b/arch/arm/mach-integrator/Makefile @@ -12,4 +12,3 @@ obj-$(CONFIG_LEDS) += leds.o obj-$(CONFIG_PCI) += pci_v3.o pci.o obj-$(CONFIG_CPU_FREQ_INTEGRATOR) += cpu.o obj-$(CONFIG_INTEGRATOR_IMPD1) += impd1.o -obj-$(CONFIG_SMP) += platsmp.o headsmp.o diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c index 897c21c2fb5b44..e9c82deb791d30 100644 --- a/arch/arm/mach-integrator/core.c +++ b/arch/arm/mach-integrator/core.c @@ -257,23 +257,7 @@ integrator_timer_interrupt(int irq, void *dev_id) */ writel(1, TIMER1_VA_BASE + TIMER_INTCLR); - /* - * the clock tick routines are only processed on the - * primary CPU - */ - if (hard_smp_processor_id() == 0) { - timer_tick(); -#ifdef CONFIG_SMP - smp_send_timer(); -#endif - } - -#ifdef CONFIG_SMP - /* - * this is the ARM equivalent of the APIC timer interrupt - */ - update_process_times(user_mode(get_irq_regs())); -#endif /* CONFIG_SMP */ + timer_tick(); write_sequnlock(&xtime_lock); diff --git a/arch/arm/mach-integrator/headsmp.S b/arch/arm/mach-integrator/headsmp.S deleted file mode 100644 index ceaa88e30d708e..00000000000000 --- a/arch/arm/mach-integrator/headsmp.S +++ /dev/null @@ -1,37 +0,0 @@ -/* - * linux/arch/arm/mach-integrator/headsmp.S - * - * Copyright (c) 2003 ARM Limited - * All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/linkage.h> -#include <linux/init.h> - - __INIT - -/* - * Integrator specific entry point for secondary CPUs. This provides - * a "holding pen" into which all secondary cores are held until we're - * ready for them to initialise. - */ -ENTRY(integrator_secondary_startup) - adr r4, 1f - ldmia r4, {r5, r6} - sub r4, r4, r5 - ldr r6, [r6, r4] -pen: ldr r7, [r6] - cmp r7, r0 - bne pen - - /* - * we've been released from the holding pen: secondary_stack - * should now contain the SVC stack for this core - */ - b secondary_startup - -1: .long . - .long phys_pen_release diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c index af9ebccac7c1ba..d4d8134ce567ae 100644 --- a/arch/arm/mach-integrator/pci_v3.c +++ b/arch/arm/mach-integrator/pci_v3.c @@ -33,6 +33,7 @@ #include <asm/irq.h> #include <asm/system.h> #include <asm/mach/pci.h> +#include <asm/irq_regs.h> #include <asm/hardware/pci_v3.h> diff --git a/arch/arm/mach-integrator/platsmp.c b/arch/arm/mach-integrator/platsmp.c deleted file mode 100644 index 613b841a10f3b4..00000000000000 --- a/arch/arm/mach-integrator/platsmp.c +++ /dev/null @@ -1,204 +0,0 @@ -/* - * linux/arch/arm/mach-cintegrator/platsmp.c - * - * Copyright (C) 2002 ARM Ltd. - * All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/errno.h> -#include <linux/mm.h> - -#include <asm/atomic.h> -#include <asm/cacheflush.h> -#include <asm/delay.h> -#include <asm/mmu_context.h> -#include <asm/ptrace.h> -#include <asm/smp.h> - -extern void integrator_secondary_startup(void); - -/* - * control for which core is the next to come out of the secondary - * boot "holding pen" - */ -volatile int __cpuinitdata pen_release = -1; -unsigned long __cpuinitdata phys_pen_release = 0; - -static DEFINE_SPINLOCK(boot_lock); - -void __cpuinit platform_secondary_init(unsigned int cpu) -{ - /* - * the primary core may have used a "cross call" soft interrupt - * to get this processor out of WFI in the BootMonitor - make - * sure that we are no longer being sent this soft interrupt - */ - smp_cross_call_done(cpumask_of_cpu(cpu)); - - /* - * if any interrupts are already enabled for the primary - * core (e.g. timer irq), then they will not have been enabled - * for us: do so - */ - secondary_scan_irqs(); - - /* - * let the primary processor know we're out of the - * pen, then head off into the C entry point - */ - pen_release = -1; - - /* - * Synchronise with the boot thread. - */ - spin_lock(&boot_lock); - spin_unlock(&boot_lock); -} - -int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) -{ - unsigned long timeout; - - /* - * set synchronisation state between this boot processor - * and the secondary one - */ - spin_lock(&boot_lock); - - /* - * The secondary processor is waiting to be released from - * the holding pen - release it, then wait for it to flag - * that it has been released by resetting pen_release. - * - * Note that "pen_release" is the hardware CPU ID, whereas - * "cpu" is Linux's internal ID. - */ - pen_release = cpu; - flush_cache_all(); - - /* - * XXX - * - * This is a later addition to the booting protocol: the - * bootMonitor now puts secondary cores into WFI, so - * poke_milo() no longer gets the cores moving; we need - * to send a soft interrupt to wake the secondary core. - * Use smp_cross_call() for this, since there's little - * point duplicating the code here - */ - smp_cross_call(cpumask_of_cpu(cpu)); - - timeout = jiffies + (1 * HZ); - while (time_before(jiffies, timeout)) { - if (pen_release == -1) - break; - - udelay(10); - } - - /* - * now the secondary core is starting up let it run its - * calibrations, then wait for it to finish - */ - spin_unlock(&boot_lock); - - return pen_release != -1 ? -ENOSYS : 0; -} - -static void __init poke_milo(void) -{ - extern void secondary_startup(void); - - /* nobody is to be released from the pen yet */ - pen_release = -1; - - phys_pen_release = virt_to_phys(&pen_release); - - /* - * write the address of secondary startup into the system-wide - * flags register, then clear the bottom two bits, which is what - * BootMonitor is waiting for - */ -#if 1 -#define CINTEGRATOR_HDR_FLAGSS_OFFSET 0x30 - __raw_writel(virt_to_phys(integrator_secondary_startup), - (IO_ADDRESS(INTEGRATOR_HDR_BASE) + - CINTEGRATOR_HDR_FLAGSS_OFFSET)); -#define CINTEGRATOR_HDR_FLAGSC_OFFSET 0x34 - __raw_writel(3, - (IO_ADDRESS(INTEGRATOR_HDR_BASE) + - CINTEGRATOR_HDR_FLAGSC_OFFSET)); -#endif - - mb(); -} - -/* - * Initialise the CPU possible map early - this describes the CPUs - * which may be present or become present in the system. - */ -void __init smp_init_cpus(void) -{ - unsigned int i, ncores = get_core_count(); - - for (i = 0; i < ncores; i++) - cpu_set(i, cpu_possible_map); -} - -void __init smp_prepare_cpus(unsigned int max_cpus) -{ - unsigned int ncores = get_core_count(); - unsigned int cpu = smp_processor_id(); - int i; - - /* sanity check */ - if (ncores == 0) { - printk(KERN_ERR - "Integrator/CP: strange CM count of 0? Default to 1\n"); - - ncores = 1; - } - - if (ncores > NR_CPUS) { - printk(KERN_WARNING - "Integrator/CP: no. of cores (%d) greater than configured " - "maximum of %d - clipping\n", - ncores, NR_CPUS); - ncores = NR_CPUS; - } - - /* - * start with some more config for the Boot CPU, now that - * the world is a bit more alive (which was not the case - * when smp_prepare_boot_cpu() was called) - */ - smp_store_cpu_info(cpu); - - /* - * are we trying to boot more cores than exist? - */ - if (max_cpus > ncores) - max_cpus = ncores; - - /* - * Initialise the present map, which describes the set of CPUs - * actually populated at the present time. - */ - for (i = 0; i < max_cpus; i++) - cpu_set(i, cpu_present_map); - - /* - * Do we need any more CPUs? If so, then let them know where - * to start. Note that, on modern versions of MILO, the "poke" - * doesn't actually do anything until each individual core is - * sent a soft interrupt to get it out of WFI - */ - if (max_cpus > 1) - poke_milo(); -} diff --git a/arch/arm/mach-iop13xx/irq.c b/arch/arm/mach-iop13xx/irq.c index 5791addd436bd6..69f07b25b3c9d7 100644 --- a/arch/arm/mach-iop13xx/irq.c +++ b/arch/arm/mach-iop13xx/irq.c @@ -30,77 +30,65 @@ /* INTCTL0 CP6 R0 Page 4 */ -static inline u32 read_intctl_0(void) +static u32 read_intctl_0(void) { u32 val; asm volatile("mrc p6, 0, %0, c0, c4, 0":"=r" (val)); return val; } -static inline void write_intctl_0(u32 val) +static void write_intctl_0(u32 val) { asm volatile("mcr p6, 0, %0, c0, c4, 0"::"r" (val)); } /* INTCTL1 CP6 R1 Page 4 */ -static inline u32 read_intctl_1(void) +static u32 read_intctl_1(void) { u32 val; asm volatile("mrc p6, 0, %0, c1, c4, 0":"=r" (val)); return val; } -static inline void write_intctl_1(u32 val) +static void write_intctl_1(u32 val) { asm volatile("mcr p6, 0, %0, c1, c4, 0"::"r" (val)); } /* INTCTL2 CP6 R2 Page 4 */ -static inline u32 read_intctl_2(void) +static u32 read_intctl_2(void) { u32 val; asm volatile("mrc p6, 0, %0, c2, c4, 0":"=r" (val)); return val; } -static inline void write_intctl_2(u32 val) +static void write_intctl_2(u32 val) { asm volatile("mcr p6, 0, %0, c2, c4, 0"::"r" (val)); } /* INTCTL3 CP6 R3 Page 4 */ -static inline u32 read_intctl_3(void) +static u32 read_intctl_3(void) { u32 val; asm volatile("mrc p6, 0, %0, c3, c4, 0":"=r" (val)); return val; } -static inline void write_intctl_3(u32 val) +static void write_intctl_3(u32 val) { asm volatile("mcr p6, 0, %0, c3, c4, 0"::"r" (val)); } /* INTSTR0 CP6 R0 Page 5 */ -static inline u32 read_intstr_0(void) -{ - u32 val; - asm volatile("mrc p6, 0, %0, c0, c5, 0":"=r" (val)); - return val; -} -static inline void write_intstr_0(u32 val) +static void write_intstr_0(u32 val) { asm volatile("mcr p6, 0, %0, c0, c5, 0"::"r" (val)); } /* INTSTR1 CP6 R1 Page 5 */ -static inline u32 read_intstr_1(void) -{ - u32 val; - asm volatile("mrc p6, 0, %0, c1, c5, 0":"=r" (val)); - return val; -} static void write_intstr_1(u32 val) { asm volatile("mcr p6, 0, %0, c1, c5, 0"::"r" (val)); @@ -108,12 +96,6 @@ static void write_intstr_1(u32 val) /* INTSTR2 CP6 R2 Page 5 */ -static inline u32 read_intstr_2(void) -{ - u32 val; - asm volatile("mrc p6, 0, %0, c2, c5, 0":"=r" (val)); - return val; -} static void write_intstr_2(u32 val) { asm volatile("mcr p6, 0, %0, c2, c5, 0"::"r" (val)); @@ -121,12 +103,6 @@ static void write_intstr_2(u32 val) /* INTSTR3 CP6 R3 Page 5 */ -static inline u32 read_intstr_3(void) -{ - u32 val; - asm volatile("mrc p6, 0, %0, c3, c5, 0":"=r" (val)); - return val; -} static void write_intstr_3(u32 val) { asm volatile("mcr p6, 0, %0, c3, c5, 0"::"r" (val)); @@ -134,12 +110,6 @@ static void write_intstr_3(u32 val) /* INTBASE CP6 R0 Page 2 */ -static inline u32 read_intbase(void) -{ - u32 val; - asm volatile("mrc p6, 0, %0, c0, c2, 0":"=r" (val)); - return val; -} static void write_intbase(u32 val) { asm volatile("mcr p6, 0, %0, c0, c2, 0"::"r" (val)); @@ -147,12 +117,6 @@ static void write_intbase(u32 val) /* INTSIZE CP6 R2 Page 2 */ -static inline u32 read_intsize(void) -{ - u32 val; - asm volatile("mrc p6, 0, %0, c2, c2, 0":"=r" (val)); - return val; -} static void write_intsize(u32 val) { asm volatile("mcr p6, 0, %0, c2, c2, 0"::"r" (val)); diff --git a/arch/arm/mach-iop13xx/msi.c b/arch/arm/mach-iop13xx/msi.c index 2d2369302220b0..63ef1124ca5cfa 100644 --- a/arch/arm/mach-iop13xx/msi.c +++ b/arch/arm/mach-iop13xx/msi.c @@ -30,52 +30,52 @@ static DECLARE_BITMAP(msi_irq_in_use, IOP13XX_NUM_MSI_IRQS); /* IMIPR0 CP6 R8 Page 1 */ -static inline u32 read_imipr_0(void) +static u32 read_imipr_0(void) { u32 val; asm volatile("mrc p6, 0, %0, c8, c1, 0":"=r" (val)); return val; } -static inline void write_imipr_0(u32 val) +static void write_imipr_0(u32 val) { asm volatile("mcr p6, 0, %0, c8, c1, 0"::"r" (val)); } /* IMIPR1 CP6 R9 Page 1 */ -static inline u32 read_imipr_1(void) +static u32 read_imipr_1(void) { u32 val; asm volatile("mrc p6, 0, %0, c9, c1, 0":"=r" (val)); return val; } -static inline void write_imipr_1(u32 val) +static void write_imipr_1(u32 val) { asm volatile("mcr p6, 0, %0, c9, c1, 0"::"r" (val)); } /* IMIPR2 CP6 R10 Page 1 */ -static inline u32 read_imipr_2(void) +static u32 read_imipr_2(void) { u32 val; asm volatile("mrc p6, 0, %0, c10, c1, 0":"=r" (val)); return val; } -static inline void write_imipr_2(u32 val) +static void write_imipr_2(u32 val) { asm volatile("mcr p6, 0, %0, c10, c1, 0"::"r" (val)); } /* IMIPR3 CP6 R11 Page 1 */ -static inline u32 read_imipr_3(void) +static u32 read_imipr_3(void) { u32 val; asm volatile("mrc p6, 0, %0, c11, c1, 0":"=r" (val)); return val; } -static inline void write_imipr_3(u32 val) +static void write_imipr_3(u32 val) { asm volatile("mcr p6, 0, %0, c11, c1, 0"::"r" (val)); } @@ -190,5 +190,5 @@ int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc) write_msi_msg(irq, &msg); set_irq_chip_and_handler(irq, &iop13xx_msi_chip, handle_simple_irq); - return irq; + return 0; } diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c index 1c9e94c38b7e7b..9d63d7f260ca5e 100644 --- a/arch/arm/mach-iop13xx/pci.c +++ b/arch/arm/mach-iop13xx/pci.c @@ -19,10 +19,11 @@ #include <linux/pci.h> #include <linux/delay.h> - +#include <linux/jiffies.h> #include <asm/irq.h> #include <asm/hardware.h> #include <asm/sizes.h> +#include <asm/signal.h> #include <asm/mach/pci.h> #include <asm/arch/pci.h> @@ -144,7 +145,7 @@ void iop13xx_map_pci_memory(void) } } -static inline int iop13xx_atu_function(int atu) +static int iop13xx_atu_function(int atu) { int func = 0; /* the function number depends on the value of the @@ -259,7 +260,7 @@ static int iop13xx_atux_pci_status(int clear) * data. Note that the data dependency on %0 encourages an abort * to be detected before we return. */ -static inline u32 iop13xx_atux_read(unsigned long addr) +static u32 iop13xx_atux_read(unsigned long addr) { u32 val; @@ -387,7 +388,7 @@ static int iop13xx_atue_pci_status(int clear) return err; } -static inline int __init +static int iop13xx_pcie_map_irq(struct pci_dev *dev, u8 idsel, u8 pin) { WARN_ON(idsel != 0); @@ -401,7 +402,7 @@ iop13xx_pcie_map_irq(struct pci_dev *dev, u8 idsel, u8 pin) } } -static inline u32 iop13xx_atue_read(unsigned long addr) +static u32 iop13xx_atue_read(unsigned long addr) { u32 val; @@ -989,7 +990,7 @@ void __init iop13xx_pci_init(void) "imprecise external abort"); } -/* intialize the pci memory space. handle any combination of +/* initialize the pci memory space. handle any combination of * atue and atux enabled/disabled */ int iop13xx_pci_setup(int nr, struct pci_sys_data *sys) diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c index 45f4f13ae11bc3..5776fd88411554 100644 --- a/arch/arm/mach-iop32x/glantank.c +++ b/arch/arm/mach-iop32x/glantank.c @@ -75,7 +75,7 @@ void __init glantank_map_io(void) #define INTC IRQ_IOP32X_XINT2 #define INTD IRQ_IOP32X_XINT3 -static inline int __init +static int __init glantank_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) { static int pci_irq_table[][4] = { diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c index 7b21c6e13e5900..d4eefbea1fe653 100644 --- a/arch/arm/mach-iop32x/iq31244.c +++ b/arch/arm/mach-iop32x/iq31244.c @@ -104,7 +104,7 @@ void __init iq31244_map_io(void) /* * EP80219/IQ31244 PCI. */ -static inline int __init +static int __init ep80219_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) { int irq; @@ -140,7 +140,7 @@ static struct hw_pci ep80219_pci __initdata = { .map_irq = ep80219_pci_map_irq, }; -static inline int __init +static int __init iq31244_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) { int irq; diff --git a/arch/arm/mach-iop32x/iq80321.c b/arch/arm/mach-iop32x/iq80321.c index bc25fb91e7b971..8d9f49164a848f 100644 --- a/arch/arm/mach-iop32x/iq80321.c +++ b/arch/arm/mach-iop32x/iq80321.c @@ -72,7 +72,7 @@ void __init iq80321_map_io(void) /* * IQ80321 PCI. */ -static inline int __init +static int __init iq80321_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) { int irq; diff --git a/arch/arm/mach-iop32x/irq.c b/arch/arm/mach-iop32x/irq.c index 82598dc18d802b..c971171c2905a3 100644 --- a/arch/arm/mach-iop32x/irq.c +++ b/arch/arm/mach-iop32x/irq.c @@ -21,12 +21,12 @@ static u32 iop32x_mask; -static inline void intctl_write(u32 val) +static void intctl_write(u32 val) { asm volatile("mcr p6, 0, %0, c0, c0, 0" : : "r" (val)); } -static inline void intstr_write(u32 val) +static void intstr_write(u32 val) { asm volatile("mcr p6, 0, %0, c4, c0, 0" : : "r" (val)); } diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c index 5f07344d96f3df..d55005d647816b 100644 --- a/arch/arm/mach-iop32x/n2100.c +++ b/arch/arm/mach-iop32x/n2100.c @@ -76,7 +76,7 @@ void __init n2100_map_io(void) /* * N2100 PCI. */ -static inline int __init +static int __init n2100_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) { int irq; diff --git a/arch/arm/mach-iop33x/iq80331.c b/arch/arm/mach-iop33x/iq80331.c index 376c932830be1c..2b063180687a1e 100644 --- a/arch/arm/mach-iop33x/iq80331.c +++ b/arch/arm/mach-iop33x/iq80331.c @@ -55,7 +55,7 @@ static struct sys_timer iq80331_timer = { /* * IQ80331 PCI. */ -static inline int __init +static int __init iq80331_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) { int irq; diff --git a/arch/arm/mach-iop33x/iq80332.c b/arch/arm/mach-iop33x/iq80332.c index 58c81496c6f62e..7889ce3cb08eda 100644 --- a/arch/arm/mach-iop33x/iq80332.c +++ b/arch/arm/mach-iop33x/iq80332.c @@ -55,7 +55,7 @@ static struct sys_timer iq80332_timer = { /* * IQ80332 PCI. */ -static inline int __init +static int __init iq80332_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) { int irq; diff --git a/arch/arm/mach-iop33x/irq.c b/arch/arm/mach-iop33x/irq.c index c65ea78a2427eb..f09dd054b9c085 100644 --- a/arch/arm/mach-iop33x/irq.c +++ b/arch/arm/mach-iop33x/irq.c @@ -22,32 +22,32 @@ static u32 iop33x_mask0; static u32 iop33x_mask1; -static inline void intctl0_write(u32 val) +static void intctl0_write(u32 val) { asm volatile("mcr p6, 0, %0, c0, c0, 0" : : "r" (val)); } -static inline void intctl1_write(u32 val) +static void intctl1_write(u32 val) { asm volatile("mcr p6, 0, %0, c1, c0, 0" : : "r" (val)); } -static inline void intstr0_write(u32 val) +static void intstr0_write(u32 val) { asm volatile("mcr p6, 0, %0, c2, c0, 0" : : "r" (val)); } -static inline void intstr1_write(u32 val) +static void intstr1_write(u32 val) { asm volatile("mcr p6, 0, %0, c3, c0, 0" : : "r" (val)); } -static inline void intbase_write(u32 val) +static void intbase_write(u32 val) { asm volatile("mcr p6, 0, %0, c12, c0, 0" : : "r" (val)); } -static inline void intsize_write(u32 val) +static void intsize_write(u32 val) { asm volatile("mcr p6, 0, %0, c13, c0, 0" : : "r" (val)); } diff --git a/arch/arm/mach-ixp2000/enp2611.c b/arch/arm/mach-ixp2000/enp2611.c index 500e997ba7a427..9c49435d42c32c 100644 --- a/arch/arm/mach-ixp2000/enp2611.c +++ b/arch/arm/mach-ixp2000/enp2611.c @@ -198,7 +198,7 @@ subsys_initcall(enp2611_pci_init); /************************************************************************* - * ENP-2611 Machine Intialization + * ENP-2611 Machine Initialization *************************************************************************/ static struct flash_platform_data enp2611_flash_platform_data = { .map_name = "cfi_probe", diff --git a/arch/arm/mach-ixp2000/ixdp2400.c b/arch/arm/mach-ixp2000/ixdp2400.c index 0fdd03ab36e6c4..ce7c15c73004e6 100644 --- a/arch/arm/mach-ixp2000/ixdp2400.c +++ b/arch/arm/mach-ixp2000/ixdp2400.c @@ -164,7 +164,7 @@ int __init ixdp2400_pci_init(void) subsys_initcall(ixdp2400_pci_init); -void ixdp2400_init_irq(void) +void __init ixdp2400_init_irq(void) { ixdp2x00_init_irq(IXDP2400_CPLD_INT_STAT, IXDP2400_CPLD_INT_MASK, IXDP2400_NR_IRQS); } diff --git a/arch/arm/mach-ixp2000/ixdp2800.c b/arch/arm/mach-ixp2000/ixdp2800.c index 70d247f09a7ece..14f09b80ab7718 100644 --- a/arch/arm/mach-ixp2000/ixdp2800.c +++ b/arch/arm/mach-ixp2000/ixdp2800.c @@ -279,7 +279,7 @@ int __init ixdp2800_pci_init(void) subsys_initcall(ixdp2800_pci_init); -void ixdp2800_init_irq(void) +void __init ixdp2800_init_irq(void) { ixdp2x00_init_irq(IXDP2800_CPLD_INT_STAT, IXDP2800_CPLD_INT_MASK, IXDP2800_NR_IRQS); } diff --git a/arch/arm/mach-ixp2000/ixdp2x00.c b/arch/arm/mach-ixp2000/ixdp2x00.c index 52b368b34346a4..73c651e83d92e5 100644 --- a/arch/arm/mach-ixp2000/ixdp2x00.c +++ b/arch/arm/mach-ixp2000/ixdp2x00.c @@ -145,7 +145,7 @@ static struct irq_chip ixdp2x00_cpld_irq_chip = { .unmask = ixdp2x00_irq_unmask }; -void ixdp2x00_init_irq(volatile unsigned long *stat_reg, volatile unsigned long *mask_reg, unsigned long nr_irqs) +void __init ixdp2x00_init_irq(volatile unsigned long *stat_reg, volatile unsigned long *mask_reg, unsigned long nr_irqs) { unsigned int irq; @@ -195,7 +195,7 @@ void __init ixdp2x00_map_io(void) * instances of the kernel. So far so good. Peers on the PCI bus running * Linux is a common design in telecom systems. The problem is that instead * of all the devices being controlled by a single host, different - * devices are controlles by different NPUs on the same bus, leading to + * devices are controlled by different NPUs on the same bus, leading to * multiple hosts on the bus. The exact bus layout looks like: * * Bus 0 @@ -211,7 +211,7 @@ void __init ixdp2x00_map_io(void) * | | | | | * ... Dev PMC Media Eth0 Eth1 ... * - * The master controlls all but Eth1, which is controlled by the + * The master controls all but Eth1, which is controlled by the * slave. What this means is that the both the master and the slave * have to scan the bus, but only one of them can enumerate the bus. * In addition, after the bus is scanned, each kernel must remove diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c index 3084a5fa751cc8..d3d730d2fc2ba7 100644 --- a/arch/arm/mach-ixp2000/ixdp2x01.c +++ b/arch/arm/mach-ixp2000/ixdp2x01.c @@ -276,7 +276,7 @@ static int __init ixdp2x01_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) /* Device is located after first MB bridge */ case 0x0008: if (tmp_bus == dev->bus) { - /* Device is located directy after first MB bridge */ + /* Device is located directly after first MB bridge */ switch (devpin) { case DEVPIN(1, 1): /* Onboard 82546 ch 0 */ if (machine_is_ixdp2401()) @@ -299,7 +299,7 @@ static int __init ixdp2x01_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) break; case 0x0010: if (tmp_bus == dev->bus) { - /* Device is located directy after second MB bridge */ + /* Device is located directly after second MB bridge */ /* Secondary bus of second bridge */ switch (devpin) { case DEVPIN(0, 1): /* DB#0 */ @@ -348,7 +348,7 @@ int __init ixdp2x01_pci_init(void) subsys_initcall(ixdp2x01_pci_init); /************************************************************************* - * IXDP2x01 Machine Intialization + * IXDP2x01 Machine Initialization *************************************************************************/ static struct flash_platform_data ixdp2x01_flash_platform_data = { .map_name = "cfi_probe", diff --git a/arch/arm/mach-ixp2000/pci.c b/arch/arm/mach-ixp2000/pci.c index 5a09a90c08fb7f..03f4cf7f9dec6f 100644 --- a/arch/arm/mach-ixp2000/pci.c +++ b/arch/arm/mach-ixp2000/pci.c @@ -102,7 +102,7 @@ int ixp2000_pci_read_config(struct pci_bus *bus, unsigned int devfn, int where, } /* - * We don't do error checks by callling clear_master_aborts() b/c the + * We don't do error checks by calling clear_master_aborts() b/c the * assumption is that the caller did a read first to make sure a device * exists. */ diff --git a/arch/arm/mach-ixp23xx/core.c b/arch/arm/mach-ixp23xx/core.c index b644bbab7d0ac2..16356ffc86ae98 100644 --- a/arch/arm/mach-ixp23xx/core.c +++ b/arch/arm/mach-ixp23xx/core.c @@ -389,7 +389,7 @@ struct sys_timer ixp23xx_timer = { /************************************************************************* - * IXP23xx Platform Initializaion + * IXP23xx Platform Initialization *************************************************************************/ static struct resource ixp23xx_uart_resources[] = { { diff --git a/arch/arm/mach-ixp23xx/ixdp2351.c b/arch/arm/mach-ixp23xx/ixdp2351.c index 7a86a2516eaa57..c41a6b5a0accbe 100644 --- a/arch/arm/mach-ixp23xx/ixdp2351.c +++ b/arch/arm/mach-ixp23xx/ixdp2351.c @@ -124,7 +124,7 @@ static struct irq_chip ixdp2351_intb_chip = { .unmask = ixdp2351_intb_unmask }; -void ixdp2351_init_irq(void) +void __init ixdp2351_init_irq(void) { int irq; diff --git a/arch/arm/mach-ixp23xx/pci.c b/arch/arm/mach-ixp23xx/pci.c index ac7d43d23c28f1..227f808dc0ecc8 100644 --- a/arch/arm/mach-ixp23xx/pci.c +++ b/arch/arm/mach-ixp23xx/pci.c @@ -284,7 +284,7 @@ int ixp23xx_pci_setup(int nr, struct pci_sys_data *sys) return 1; } -void ixp23xx_pci_slave_init(void) +void __init ixp23xx_pci_slave_init(void) { ixp23xx_pci_common_init(); } diff --git a/arch/arm/mach-ixp23xx/roadrunner.c b/arch/arm/mach-ixp23xx/roadrunner.c index d06e21b70de57e..e35644961aa442 100644 --- a/arch/arm/mach-ixp23xx/roadrunner.c +++ b/arch/arm/mach-ixp23xx/roadrunner.c @@ -110,7 +110,7 @@ static int __init roadrunner_map_irq(struct pci_dev *dev, u8 idsel, u8 pin) return NO_IRQ; } -static void roadrunner_pci_preinit(void) +static void __init roadrunner_pci_preinit(void) { set_irq_type(IRQ_ROADRUNNER_PCI_INTC, IRQT_LOW); set_irq_type(IRQ_ROADRUNNER_PCI_INTD, IRQT_LOW); diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig index 9715ef506c24b3..060909870b505b 100644 --- a/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig @@ -104,9 +104,6 @@ config MACH_DSMG600 DSM-G600 RevA device. For more information on this platform, see http://www.nslu2-linux.org/wiki/DSMG600/HomePage -# -# Avila and IXDP share the same source for now. Will change in future -# config ARCH_IXDP4XX bool depends on ARCH_IXDP425 || MACH_IXDP465 || MACH_KIXRP435 diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index 64685da1462d64..8112f726ffa088 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -283,7 +283,7 @@ static struct irqaction ixp4xx_timer_irq = { .handler = ixp4xx_timer_interrupt, }; -static void __init ixp4xx_timer_init(void) +void __init ixp4xx_timer_init(void) { /* Reset/disable counter */ *IXP4XX_OSRT1 = 0; diff --git a/arch/arm/mach-ixp4xx/coyote-pci.c b/arch/arm/mach-ixp4xx/coyote-pci.c index 7bc94f3def1c8d..ad2e5b97966ecf 100644 --- a/arch/arm/mach-ixp4xx/coyote-pci.c +++ b/arch/arm/mach-ixp4xx/coyote-pci.c @@ -25,10 +25,6 @@ #include <asm/mach/pci.h> -extern void ixp4xx_pci_preinit(void); -extern int ixp4xx_setup(int nr, struct pci_sys_data *sys); -extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys); - void __init coyote_pci_preinit(void) { set_irq_type(IRQ_COYOTE_PCI_SLOT0, IRQT_LOW); diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c index 1caff65e22cc39..1e75e105c4f7fe 100644 --- a/arch/arm/mach-ixp4xx/dsmg600-setup.c +++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c @@ -18,6 +18,7 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/flash.h> +#include <asm/mach/time.h> static struct flash_platform_data dsmg600_flash_data = { .map_name = "cfi_probe", @@ -128,6 +129,19 @@ static void dsmg600_power_off(void) gpio_line_set(DSMG600_PO_GPIO, IXP4XX_GPIO_HIGH); } +static void __init dsmg600_timer_init(void) +{ + /* The xtal on this machine is non-standard. */ + ixp4xx_timer_freq = DSMG600_FREQ; + + /* Call standard timer_init function. */ + ixp4xx_timer_init(); +} + +static struct sys_timer dsmg600_timer = { + .init = dsmg600_timer_init, +}; + static void __init dsmg600_init(void) { ixp4xx_sys_init(); @@ -155,21 +169,13 @@ static void __init dsmg600_init(void) #endif } -static void __init dsmg600_fixup(struct machine_desc *desc, - struct tag *tags, char **cmdline, struct meminfo *mi) -{ - /* The xtal on this machine is non-standard. */ - ixp4xx_timer_freq = DSMG600_FREQ; -} - MACHINE_START(DSMG600, "D-Link DSM-G600 RevA") /* Maintainer: www.nslu2-linux.org */ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC, .boot_params = 0x00000100, - .fixup = dsmg600_fixup, .map_io = ixp4xx_map_io, .init_irq = ixp4xx_init_irq, - .timer = &ixp4xx_timer, + .timer = &dsmg600_timer, .init_machine = dsmg600_init, MACHINE_END diff --git a/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/arch/arm/mach-ixp4xx/gtwx5715-setup.c index 30f1300e0e211e..dc6725bda3c489 100644 --- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c +++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c @@ -1,7 +1,7 @@ /* * arch/arm/mach-ixp4xx/gtwx5715-setup.c * - * Gemtek GTWX5715 (Linksys WRV54G) board settup + * Gemtek GTWX5715 (Linksys WRV54G) board setup * * Copyright (C) 2004 George T. Joseph * Derived from Coyote diff --git a/arch/arm/mach-ixp4xx/ixdpg425-pci.c b/arch/arm/mach-ixp4xx/ixdpg425-pci.c index 509a95a692a419..d1e75b7dc3b1a1 100644 --- a/arch/arm/mach-ixp4xx/ixdpg425-pci.c +++ b/arch/arm/mach-ixp4xx/ixdpg425-pci.c @@ -23,10 +23,6 @@ #include <asm/mach/pci.h> -extern void ixp4xx_pci_preinit(void); -extern int ixp4xx_setup(int nr, struct pci_sys_data *sys); -extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys); - void __init ixdpg425_pci_preinit(void) { set_irq_type(IRQ_IXP4XX_GPIO6, IRQT_LOW); diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c index 9a31444d9214e8..78a17413ceca70 100644 --- a/arch/arm/mach-ixp4xx/nas100d-setup.c +++ b/arch/arm/mach-ixp4xx/nas100d-setup.c @@ -155,7 +155,8 @@ static void __init nas100d_init(void) pm_power_off = nas100d_power_off; - /* This is only useful on a modified machine, but it is valuable + /* + * This is only useful on a modified machine, but it is valuable * to have it first in order to see debug messages, and so that * it does *not* get removed if platform_add_devices fails! */ diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c index 162c266e5f8fb8..9bf8ccbcaccfd0 100644 --- a/arch/arm/mach-ixp4xx/nslu2-setup.c +++ b/arch/arm/mach-ixp4xx/nslu2-setup.c @@ -22,6 +22,7 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/flash.h> +#include <asm/mach/time.h> static struct flash_platform_data nslu2_flash_data = { .map_name = "cfi_probe", @@ -49,26 +50,26 @@ static struct ixp4xx_i2c_pins nslu2_i2c_gpio_pins = { static struct resource nslu2_led_resources[] = { { .name = "ready", /* green led */ - .start = NSLU2_LED_GRN, - .end = NSLU2_LED_GRN, + .start = NSLU2_LED_GRN_GPIO, + .end = NSLU2_LED_GRN_GPIO, .flags = IXP4XX_GPIO_HIGH, }, { .name = "status", /* red led */ - .start = NSLU2_LED_RED, - .end = NSLU2_LED_RED, + .start = NSLU2_LED_RED_GPIO, + .end = NSLU2_LED_RED_GPIO, .flags = IXP4XX_GPIO_HIGH, }, { .name = "disk-1", - .start = NSLU2_LED_DISK1, - .end = NSLU2_LED_DISK1, + .start = NSLU2_LED_DISK1_GPIO, + .end = NSLU2_LED_DISK1_GPIO, .flags = IXP4XX_GPIO_LOW, }, { .name = "disk-2", - .start = NSLU2_LED_DISK2, - .end = NSLU2_LED_DISK2, + .start = NSLU2_LED_DISK2_GPIO, + .end = NSLU2_LED_DISK2_GPIO, .flags = IXP4XX_GPIO_LOW, }, }; @@ -157,10 +158,21 @@ static void nslu2_power_off(void) gpio_line_set(NSLU2_PO_GPIO, IXP4XX_GPIO_HIGH); } -static void __init nslu2_init(void) +static void __init nslu2_timer_init(void) { - ixp4xx_timer_freq = NSLU2_FREQ; + /* The xtal on this machine is non-standard. */ + ixp4xx_timer_freq = NSLU2_FREQ; + + /* Call standard timer_init function. */ + ixp4xx_timer_init(); +} +static struct sys_timer nslu2_timer = { + .init = nslu2_timer_init, +}; + +static void __init nslu2_init(void) +{ ixp4xx_sys_init(); nslu2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); @@ -169,7 +181,8 @@ static void __init nslu2_init(void) pm_power_off = nslu2_power_off; - /* This is only useful on a modified machine, but it is valuable + /* + * This is only useful on a modified machine, but it is valuable * to have it first in order to see debug messages, and so that * it does *not* get removed if platform_add_devices fails! */ @@ -185,6 +198,6 @@ MACHINE_START(NSLU2, "Linksys NSLU2") .boot_params = 0x00000100, .map_io = ixp4xx_map_io, .init_irq = ixp4xx_init_irq, - .timer = &ixp4xx_timer, + .timer = &nslu2_timer, .init_machine = nslu2_init, MACHINE_END diff --git a/arch/arm/mach-lh7a40x/lcd-panel.h b/arch/arm/mach-lh7a40x/lcd-panel.h index 4fb2efc4950f03..df6e38ed425b3d 100644 --- a/arch/arm/mach-lh7a40x/lcd-panel.h +++ b/arch/arm/mach-lh7a40x/lcd-panel.h @@ -126,7 +126,7 @@ static struct clcd_panel_extra lcd_panel_extra = { */ -/* The full horozontal cycle (Th) is clock/360/400/450. */ +/* The full horizontal cycle (Th) is clock/360/400/450. */ /* The full vertical cycle (Tv) is line/251/262/280. */ #define PIX_CLOCK_TARGET (6300000) /* -/6.3/7 MHz */ @@ -162,7 +162,7 @@ static struct clcd_panel lcd_panel = { /* Logic Product Development LCD 6.4" VGA -10 */ /* Sharp PN LQ64D343 */ -/* The full horozontal cycle (Th) is clock/750/800/900. */ +/* The full horizontal cycle (Th) is clock/750/800/900. */ /* The full vertical cycle (Tv) is line/515/525/560. */ #define PIX_CLOCK_TARGET (28330000) @@ -243,7 +243,7 @@ static struct clcd_panel lcd_panel = { * (fdisk, e2fsck). And, at that speed the display may have a visible * flicker. */ -/* The full horozontal cycle (Th) is clock/832/1056/1395. */ +/* The full horizontal cycle (Th) is clock/832/1056/1395. */ #define PIX_CLOCK_TARGET (20000000) #define PIX_CLOCK_DIVIDER CLOCK_TO_DIV (PIX_CLOCK_TARGET, HCLK) diff --git a/arch/arm/mach-ns9xxx/time.c b/arch/arm/mach-ns9xxx/time.c index dd257084441ca8..b97d0c54a38816 100644 --- a/arch/arm/mach-ns9xxx/time.c +++ b/arch/arm/mach-ns9xxx/time.c @@ -35,7 +35,7 @@ static unsigned long ns9xxx_timer_gettimeoffset(void) { /* return the microseconds which have passed since the last interrupt * was _serviced_. That is, if an interrupt is pending or the counter - * reloads, return one periode more. */ + * reloads, return one period more. */ u32 counter1 = SYS_TR(0); int pending = SYS_ISR & (1 << IRQ_TIMER0); diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index 856c681ebbbcf9..f6ecdd3a2478ee 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -38,7 +38,7 @@ config MACH_OMAP_H2 config MACH_OMAP_H3 bool "TI H3 Support" depends on ARCH_OMAP1 && ARCH_OMAP16XX - select GPIOEXPANDER_OMAP +# select GPIOEXPANDER_OMAP help TI OMAP 1710 H3 board support. Say Y here if you have such a board. diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 7d0cf7af88ceb8..e7130293a03fbc 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -385,7 +385,7 @@ static void __init osk_init(void) /* Workaround for wrong CS3 (NOR flash) timing * There are some U-Boot versions out there which configure * wrong CS3 memory timings. This mainly leads to CRC - * or similiar errors if you use NOR flash (e.g. with JFFS2) + * or similar errors if you use NOR flash (e.g. with JFFS2) */ if (EMIFS_CCS(3) != EMIFS_CS3_VAL) EMIFS_CCS(3) = EMIFS_CS3_VAL; diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index 4bc8a62909b9ac..01582418562910 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -7,7 +7,7 @@ * * Original version : Laurent Gonzalez * - * Maintainters : http://palmtelinux.sf.net + * Maintainers : http://palmtelinux.sf.net * palmtelinux-developpers@lists.sf.net * * This program is free software; you can redistribute it and/or modify diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index 8caee68aa090a3..5bb348e2e31530 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -438,7 +438,7 @@ void omap_pm_suspend(void) omap_writew(0, ULPD_SOFT_DISABLE_REQ_REG); /* - * Reenable interrupts + * Re-enable interrupts */ local_irq_enable(); diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index 5170481afeab93..588adb5ab47fa2 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -443,7 +443,7 @@ static long omap2_clk_round_rate(struct clk *clk, unsigned long rate) /* * Check the DLL lock state, and return tue if running in unlock mode. - * This is needed to compenste for the shifted DLL value in unlock mode. + * This is needed to compensate for the shifted DLL value in unlock mode. */ static u32 omap2_dll_force_needed(void) { diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index 162978fd535943..4f791866b91090 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -338,7 +338,7 @@ struct prcm_config { /* * These represent optimal values for common parts, it won't work for all. * As long as you scale down, most parameters are still work, they just - * become sub-optimal. The RFR value goes in the oppisite direction. If you + * become sub-optimal. The RFR value goes in the opposite direction. If you * don't adjust it down as your clock period increases the refresh interval * will not be met. Setting all parameters for complete worst case may work, * but may cut memory performance by 2x. Due to errata the DLLs need to be @@ -384,7 +384,7 @@ struct prcm_config { * Filling in table based on H4 boards and 2430-SDPs variants available. * There are quite a few more rates combinations which could be defined. * - * When multiple values are defiend the start up will try and choose the + * When multiple values are defined the start up will try and choose the * fastest one. If a 'fast' value is defined, then automatically, the /2 * one should be included as it can be used. Generally having more that * one fast set does not make sense, as static timings need to be changed diff --git a/arch/arm/mach-pxa/corgi_lcd.c b/arch/arm/mach-pxa/corgi_lcd.c index a72476c24621a1..365b9435f748bb 100644 --- a/arch/arm/mach-pxa/corgi_lcd.c +++ b/arch/arm/mach-pxa/corgi_lcd.c @@ -40,7 +40,7 @@ #define PICTRL_ADRS 0x06 #define POLCTRL_ADRS 0x07 -/* Resgister Bit Definitions */ +/* Register Bit Definitions */ #define RESCTL_QVGA 0x01 #define RESCTL_VGA 0x00 @@ -55,11 +55,11 @@ #define POWER0_COM_DCLK 0x01 /* COM Voltage DC Bias DAC Serial Data Clock */ #define POWER0_COM_DOUT 0x02 /* COM Voltage DC Bias DAC Serial Data Out */ #define POWER0_DAC_ON 0x04 /* DAC Power Supply ON */ -#define POWER0_COM_ON 0x08 /* COM Powewr Supply ON */ +#define POWER0_COM_ON 0x08 /* COM Power Supply ON */ #define POWER0_VCC5_ON 0x10 /* VCC5 Power Supply ON */ #define POWER0_DAC_OFF 0x00 /* DAC Power Supply OFF */ -#define POWER0_COM_OFF 0x00 /* COM Powewr Supply OFF */ +#define POWER0_COM_OFF 0x00 /* COM Power Supply OFF */ #define POWER0_VCC5_OFF 0x00 /* VCC5 Power Supply OFF */ #define PICTRL_INIT_STATE 0x01 @@ -145,7 +145,7 @@ static void lcdtg_set_common_voltage(u8 base_data, u8 data) lcdtg_i2c_send_stop(base_data); } -/* Set Phase Adjuct */ +/* Set Phase Adjust */ static void lcdtg_set_phadadj(int mode) { int adj; @@ -226,7 +226,7 @@ static void lcdtg_hw_init(int mode) /* Signals output enable */ corgi_ssp_lcdtg_send(PICTRL_ADRS, 0); - /* Set Phase Adjuct */ + /* Set Phase Adjust */ lcdtg_set_phadadj(mode); /* Initialize for Input Signals from ATI */ diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c index ff6b4ee037f5d6..40dea3d5142b31 100644 --- a/arch/arm/mach-pxa/corgi_ssp.c +++ b/arch/arm/mach-pxa/corgi_ssp.c @@ -32,7 +32,7 @@ static struct corgissp_machinfo *ssp_machinfo; * There are three devices connected to the SSP interface: * 1. A touchscreen controller (TI ADS7846 compatible) * 2. An LCD contoller (with some Backlight functionality) - * 3. A battery moinitoring IC (Maxim MAX1111) + * 3. A battery monitoring IC (Maxim MAX1111) * * Each device uses a different speed/mode of communication. * diff --git a/arch/arm/mach-realview/localtimer.c b/arch/arm/mach-realview/localtimer.c index caf6b8bb6c951e..c7bdf04ab094d1 100644 --- a/arch/arm/mach-realview/localtimer.c +++ b/arch/arm/mach-realview/localtimer.c @@ -30,7 +30,7 @@ static unsigned long mpcore_timer_rate; /* * local_timer_ack: checks for a local timer interrupt. * - * If a local timer interrupt has occured, acknowledge and return 1. + * If a local timer interrupt has occurred, acknowledge and return 1. * Otherwise, return 0. */ int local_timer_ack(void) diff --git a/arch/arm/mach-s3c2410/bast.h b/arch/arm/mach-s3c2410/bast.h deleted file mode 100644 index e98543742eb936..00000000000000 --- a/arch/arm/mach-s3c2410/bast.h +++ /dev/null @@ -1,2 +0,0 @@ -/* linux/arch/arm/mach-s3c2410/bast.h -extern void bast_init_irq(void); diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c index bc308ceb91c317..435adcce6482a3 100644 --- a/arch/arm/mach-s3c2410/mach-amlm5900.c +++ b/arch/arm/mach-s3c2410/mach-amlm5900.c @@ -160,7 +160,7 @@ static struct platform_device *amlm5900_devices[] __initdata = { #endif }; -void __init amlm5900_map_io(void) +static void __init amlm5900_map_io(void) { s3c24xx_init_io(amlm5900_iodesc, ARRAY_SIZE(amlm5900_iodesc)); s3c24xx_init_clocks(0); diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c index 5ccd0be23a3357..5c9bcea7476732 100644 --- a/arch/arm/mach-s3c2410/mach-h1940.c +++ b/arch/arm/mach-s3c2410/mach-h1940.c @@ -17,6 +17,7 @@ #include <linux/list.h> #include <linux/timer.h> #include <linux/init.h> +#include <linux/sysdev.h> #include <linux/serial_core.h> #include <linux/platform_device.h> diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c index 9cc4253d7bbc75..d86e6f18bac9f7 100644 --- a/arch/arm/mach-s3c2410/mach-qt2410.c +++ b/arch/arm/mach-s3c2410/mach-qt2410.c @@ -27,6 +27,7 @@ #include <linux/list.h> #include <linux/timer.h> #include <linux/init.h> +#include <linux/sysdev.h> #include <linux/platform_device.h> #include <linux/serial_core.h> #include <linux/spi/spi.h> diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c index d0f4695c09d9c7..668cccefe7b066 100644 --- a/arch/arm/mach-s3c2412/dma.c +++ b/arch/arm/mach-s3c2412/dma.c @@ -59,8 +59,8 @@ static struct s3c24xx_dma_map __initdata s3c2412_dma_mappings[] = { [DMACH_SPI1] = { .name = "spi1", .channels = MAP(S3C2412_DMAREQSEL_SPI1TX), - .hw_addr.to = S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT, - .hw_addr.from = S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT, + .hw_addr.to = S3C2410_PA_SPI + S3C2412_SPI1 + S3C2410_SPTDAT, + .hw_addr.from = S3C2410_PA_SPI + S3C2412_SPI1 + S3C2410_SPRDAT, }, [DMACH_UART0] = { .name = "uart0", diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c index aafe0bc593f17b..782b5814ced244 100644 --- a/arch/arm/mach-s3c2412/s3c2412.c +++ b/arch/arm/mach-s3c2412/s3c2412.c @@ -16,6 +16,7 @@ #include <linux/list.h> #include <linux/timer.h> #include <linux/init.h> +#include <linux/delay.h> #include <linux/sysdev.h> #include <linux/serial_core.h> #include <linux/platform_device.h> @@ -29,6 +30,7 @@ #include <asm/io.h> #include <asm/irq.h> +#include <asm/arch/reset.h> #include <asm/arch/idle.h> #include <asm/arch/regs-clock.h> @@ -37,6 +39,8 @@ #include <asm/arch/regs-gpio.h> #include <asm/arch/regs-gpioj.h> #include <asm/arch/regs-dsc.h> +#include <asm/arch/regs-spi.h> +#include <asm/arch/regs-s3c2412.h> #include <asm/plat-s3c24xx/s3c2412.h> #include <asm/plat-s3c24xx/cpu.h> @@ -74,6 +78,14 @@ void __init s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no) s3c_device_sdi.name = "s3c2412-sdi"; s3c_device_lcd.name = "s3c2412-lcd"; s3c_device_nand.name = "s3c2412-nand"; + + /* spi channel related changes, s3c2412/13 specific */ + s3c_device_spi0.name = "s3c2412-spi"; + s3c_device_spi0.resource[0].end = S3C24XX_PA_SPI + 0x24; + s3c_device_spi1.name = "s3c2412-spi"; + s3c_device_spi1.resource[0].start = S3C24XX_PA_SPI + S3C2412_SPI1; + s3c_device_spi1.resource[0].end = S3C24XX_PA_SPI + S3C2412_SPI1 + 0x24; + } /* s3c2412_idle @@ -97,6 +109,23 @@ static void s3c2412_idle(void) cpu_do_idle(); } +static void s3c2412_hard_reset(void) +{ + /* errata "Watch-dog/Software Reset Problem" specifies that + * this reset must be done with the SYSCLK sourced from + * EXTCLK instead of FOUT to avoid a glitch in the reset + * mechanism. + * + * See the watchdog section of the S3C2412 manual for more + * information on this fix. + */ + + __raw_writel(0x00, S3C2412_CLKSRC); + __raw_writel(S3C2412_SWRST_RESET, S3C2412_SWRST); + + mdelay(1); +} + /* s3c2412_map_io * * register the standard cpu IO areas, and any passed in from the @@ -113,6 +142,10 @@ void __init s3c2412_map_io(struct map_desc *mach_desc, int mach_size) s3c24xx_idle = s3c2412_idle; + /* set custom reset hook */ + + s3c24xx_reset_hook = s3c2412_hard_reset; + /* register our io-tables */ iotable_init(s3c2412_iodesc, ARRAY_SIZE(s3c2412_iodesc)); diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c index 324f5a2379217d..4d6c7a574c1a22 100644 --- a/arch/arm/mach-s3c2440/mach-osiris.c +++ b/arch/arm/mach-s3c2440/mach-osiris.c @@ -45,7 +45,7 @@ #include <asm/plat-s3c24xx/devs.h> #include <asm/plat-s3c24xx/cpu.h> -/* onboard perihpheral map */ +/* onboard perihperal map */ static struct map_desc osiris_iodesc[] __initdata = { /* ISA IO areas (may be over-written later) */ diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c index c3cc4bf158f628..866ff71c01ddf2 100644 --- a/arch/arm/mach-s3c2440/mach-rx3715.c +++ b/arch/arm/mach-s3c2440/mach-rx3715.c @@ -19,6 +19,7 @@ #include <linux/init.h> #include <linux/tty.h> #include <linux/console.h> +#include <linux/sysdev.h> #include <linux/platform_device.h> #include <linux/serial_core.h> #include <linux/serial.h> diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c index 0b6e360aeae7d2..58402948c47cd6 100644 --- a/arch/arm/mach-s3c2443/clock.c +++ b/arch/arm/mach-s3c2443/clock.c @@ -394,7 +394,7 @@ static int s3c2443_setrate_usbhost(struct clk *clk, unsigned long rate) return 0; } -struct clk clk_usb_bus_host = { +static struct clk clk_usb_bus_host = { .name = "usb-bus-host-parent", .id = -1, .parent = &clk_esysclk, @@ -747,6 +747,24 @@ static struct clk init_clocks[] = { .enable = s3c2443_clkcon_enable_h, .ctrlbit = S3C2443_HCLKCON_USBD, }, { + .name = "hsmmc", + .id = -1, + .parent = &clk_h, + .enable = s3c2443_clkcon_enable_h, + .ctrlbit = S3C2443_HCLKCON_HSMMC, + }, { + .name = "cfc", + .id = -1, + .parent = &clk_h, + .enable = s3c2443_clkcon_enable_h, + .ctrlbit = S3C2443_HCLKCON_CFC, + }, { + .name = "ssmc", + .id = -1, + .parent = &clk_h, + .enable = s3c2443_clkcon_enable_h, + .ctrlbit = S3C2443_HCLKCON_SSMC, + }, { .name = "timers", .id = -1, .parent = &clk_p, @@ -791,7 +809,8 @@ static struct clk init_clocks[] = { .name = "usb-bus-host", .id = -1, .parent = &clk_usb_bus_host, - }, { .name = "ac97", + }, { + .name = "ac97", .id = -1, .parent = &clk_p, .ctrlbit = S3C2443_PCLKCON_AC97, diff --git a/arch/arm/mach-s3c2443/mach-smdk2443.c b/arch/arm/mach-s3c2443/mach-smdk2443.c index b71ee53c28653e..b1eb709ee65a3d 100644 --- a/arch/arm/mach-s3c2443/mach-smdk2443.c +++ b/arch/arm/mach-s3c2443/mach-smdk2443.c @@ -104,6 +104,7 @@ static struct s3c2410_uartcfg smdk2443_uartcfgs[] __initdata = { static struct platform_device *smdk2443_devices[] __initdata = { &s3c_device_wdt, &s3c_device_i2c, + &s3c_device_hsmmc, }; static void __init smdk2443_map_io(void) diff --git a/arch/arm/mach-s3c2443/s3c2443.c b/arch/arm/mach-s3c2443/s3c2443.c index 11b1d0b310c3c8..8d8117158d23aa 100644 --- a/arch/arm/mach-s3c2443/s3c2443.c +++ b/arch/arm/mach-s3c2443/s3c2443.c @@ -63,6 +63,10 @@ int __init s3c2443_init(void) s3c_device_nand.name = "s3c2412-nand"; + /* change WDT IRQ number */ + s3c_device_wdt.resource[1].start = IRQ_S3C2443_WDT; + s3c_device_wdt.resource[1].end = IRQ_S3C2443_WDT; + return sysdev_register(&s3c2443_sysdev); } diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c index d7c038a0256bf9..4cbf9468f654c9 100644 --- a/arch/arm/mach-sa1100/neponset.c +++ b/arch/arm/mach-sa1100/neponset.c @@ -139,12 +139,12 @@ static u_int neponset_get_mctrl(struct uart_port *port) return ret; } -static struct sa1100_port_fns neponset_port_fns __initdata = { +static struct sa1100_port_fns neponset_port_fns __devinitdata = { .set_mctrl = neponset_set_mctrl, .get_mctrl = neponset_get_mctrl, }; -static int neponset_probe(struct platform_device *dev) +static int __devinit neponset_probe(struct platform_device *dev) { sa1100_register_uart_fns(&neponset_port_fns); diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c index 416e277054c239..29cb0c1604ab89 100644 --- a/arch/arm/mach-sa1100/time.c +++ b/arch/arm/mach-sa1100/time.c @@ -25,7 +25,7 @@ static unsigned long __init sa1100_get_rtc_time(void) { /* * According to the manual we should be able to let RTTR be zero - * and then a default diviser for a 32.768KHz clock is used. + * and then a default divisor for a 32.768KHz clock is used. * Apparently this doesn't work, at least for my SA1110 rev 5. * If the clock divider is uninitialized then reset it to the * default value to get the 1Hz clock. diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 15f0284010ca2d..e7904bc92c73f8 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -351,6 +351,7 @@ config CPU_V6 select CPU_CACHE_V6 select CPU_CACHE_VIPT select CPU_CP15_MMU + select CPU_HAS_ASID select CPU_COPY_V6 if MMU select CPU_TLB_V6 if MMU @@ -376,8 +377,9 @@ config CPU_V7 select CPU_CACHE_V7 select CPU_CACHE_VIPT select CPU_CP15_MMU + select CPU_HAS_ASID select CPU_COPY_V6 if MMU - select CPU_TLB_V6 if MMU + select CPU_TLB_V7 if MMU # Figure out what processor architecture version we should be using. # This defines the compiler instruction set which depends on the machine type. @@ -496,8 +498,17 @@ config CPU_TLB_V4WBI config CPU_TLB_V6 bool +config CPU_TLB_V7 + bool + endif +config CPU_HAS_ASID + bool + help + This indicates whether the CPU has the ASID register; used to + tag TLB and possibly cache entries. + config CPU_CP15 bool help diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile index b5bd335ff14aad..762702765fc3f0 100644 --- a/arch/arm/mm/Makefile +++ b/arch/arm/mm/Makefile @@ -46,6 +46,7 @@ obj-$(CONFIG_CPU_TLB_V4WT) += tlb-v4.o obj-$(CONFIG_CPU_TLB_V4WB) += tlb-v4wb.o obj-$(CONFIG_CPU_TLB_V4WBI) += tlb-v4wbi.o obj-$(CONFIG_CPU_TLB_V6) += tlb-v6.o +obj-$(CONFIG_CPU_TLB_V7) += tlb-v7.o obj-$(CONFIG_CPU_ARM610) += proc-arm6_7.o obj-$(CONFIG_CPU_ARM710) += proc-arm6_7.o diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c index 19ca333240ecc1..36440c899583b9 100644 --- a/arch/arm/mm/alignment.c +++ b/arch/arm/mm/alignment.c @@ -3,7 +3,7 @@ * * Copyright (C) 1995 Linus Torvalds * Modifications for ARM processor (c) 1995-2001 Russell King - * Thumb aligment fault fixups (c) 2004 MontaVista Software, Inc. + * Thumb alignment fault fixups (c) 2004 MontaVista Software, Inc. * - Adapted from gdb/sim/arm/thumbemu.c -- Thumb instruction emulation. * Copyright (C) 1996, Cygnus Software Technologies Ltd. * diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c index d6167ad4e011bf..f3ade18862aaa8 100644 --- a/arch/arm/mm/ioremap.c +++ b/arch/arm/mm/ioremap.c @@ -346,7 +346,7 @@ void __iounmap(volatile void __iomem *addr) #ifndef CONFIG_SMP /* * If this is a section based mapping we need to handle it - * specially as the VM subysystem does not know how to handle + * specially as the VM subsystem does not know how to handle * such a beast. We need the lock here b/c we need to clear * all the mappings before the area can be reclaimed * by someone else. diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c index 2c4c2422cd1e16..2728b0e7d2bbd9 100644 --- a/arch/arm/mm/mmap.c +++ b/arch/arm/mm/mmap.c @@ -5,7 +5,7 @@ #include <linux/mm.h> #include <linux/mman.h> #include <linux/shm.h> - +#include <linux/sched.h> #include <asm/system.h> #define COLOUR_ALIGN(addr,pgoff) \ diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 2ba1530d1ce147..02e050ae59f687 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -92,7 +92,7 @@ static struct cachepolicy cache_policies[] __initdata = { }; /* - * These are useful for identifing cache coherency + * These are useful for identifying cache coherency * problems by allowing the cache or the cache and * writebuffer to be turned off. (Note: the write * buffer should not be on and the cache off). diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index dd823dd4a37454..718f4782ee8b94 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -256,7 +256,7 @@ __v7_proc_info: .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP .long cpu_v7_name .long v7_processor_functions - .long v6wbi_tlb_fns + .long v7wbi_tlb_fns .long v6_user_fns .long v7_cache_fns .size __v7_proc_info, . - __v7_proc_info diff --git a/arch/arm/mm/tlb-v7.S b/arch/arm/mm/tlb-v7.S new file mode 100644 index 00000000000000..b56dda8052f781 --- /dev/null +++ b/arch/arm/mm/tlb-v7.S @@ -0,0 +1,88 @@ +/* + * linux/arch/arm/mm/tlb-v7.S + * + * Copyright (C) 1997-2002 Russell King + * Modified for ARMv7 by Catalin Marinas + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * ARM architecture version 6 TLB handling functions. + * These assume a split I/D TLB. + */ +#include <linux/linkage.h> +#include <asm/asm-offsets.h> +#include <asm/page.h> +#include <asm/tlbflush.h> +#include "proc-macros.S" + +/* + * v7wbi_flush_user_tlb_range(start, end, vma) + * + * Invalidate a range of TLB entries in the specified address space. + * + * - start - start address (may not be aligned) + * - end - end address (exclusive, may not be aligned) + * - vma - vma_struct describing address range + * + * It is assumed that: + * - the "Invalidate single entry" instruction will invalidate + * both the I and the D TLBs on Harvard-style TLBs + */ +ENTRY(v7wbi_flush_user_tlb_range) + vma_vm_mm r3, r2 @ get vma->vm_mm + mmid r3, r3 @ get vm_mm->context.id + dsb + mov r0, r0, lsr #PAGE_SHIFT @ align address + mov r1, r1, lsr #PAGE_SHIFT + asid r3, r3 @ mask ASID + orr r0, r3, r0, lsl #PAGE_SHIFT @ Create initial MVA + mov r1, r1, lsl #PAGE_SHIFT + vma_vm_flags r2, r2 @ get vma->vm_flags +1: + mcr p15, 0, r0, c8, c6, 1 @ TLB invalidate D MVA (was 1) + tst r2, #VM_EXEC @ Executable area ? + mcrne p15, 0, r0, c8, c5, 1 @ TLB invalidate I MVA (was 1) + add r0, r0, #PAGE_SZ + cmp r0, r1 + blo 1b + mov ip, #0 + mcr p15, 0, ip, c7, c5, 6 @ flush BTAC/BTB + dsb + mov pc, lr + +/* + * v7wbi_flush_kern_tlb_range(start,end) + * + * Invalidate a range of kernel TLB entries + * + * - start - start address (may not be aligned) + * - end - end address (exclusive, may not be aligned) + */ +ENTRY(v7wbi_flush_kern_tlb_range) + dsb + mov r0, r0, lsr #PAGE_SHIFT @ align address + mov r1, r1, lsr #PAGE_SHIFT + mov r0, r0, lsl #PAGE_SHIFT + mov r1, r1, lsl #PAGE_SHIFT +1: + mcr p15, 0, r0, c8, c6, 1 @ TLB invalidate D MVA + mcr p15, 0, r0, c8, c5, 1 @ TLB invalidate I MVA + add r0, r0, #PAGE_SZ + cmp r0, r1 + blo 1b + mov r2, #0 + mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB + dsb + isb + mov pc, lr + + .section ".text.init", #alloc, #execinstr + + .type v7wbi_tlb_fns, #object +ENTRY(v7wbi_tlb_fns) + .long v7wbi_flush_user_tlb_range + .long v7wbi_flush_kern_tlb_range + .long v6wbi_tlb_flags + .size v7wbi_tlb_fns, . - v7wbi_tlb_fns diff --git a/arch/arm/nwfpe/softfloat.h b/arch/arm/nwfpe/softfloat.h index 0a3067452cd297..260fe29d73f576 100644 --- a/arch/arm/nwfpe/softfloat.h +++ b/arch/arm/nwfpe/softfloat.h @@ -273,4 +273,7 @@ static inline flag float64_lt_nocheck(float64 a, float64 b) extern flag float32_is_nan( float32 a ); extern flag float64_is_nan( float64 a ); +extern int32 float64_to_uint32( struct roundingData *roundData, float64 a ); +extern int32 float64_to_uint32_round_to_zero( float64 a ); + #endif diff --git a/arch/arm/oprofile/op_model_mpcore.c b/arch/arm/oprofile/op_model_mpcore.c index 898500718249dc..7791da791f5f93 100644 --- a/arch/arm/oprofile/op_model_mpcore.c +++ b/arch/arm/oprofile/op_model_mpcore.c @@ -257,8 +257,13 @@ static void em_stop(void) */ static void em_route_irq(int irq, unsigned int cpu) { - irq_desc[irq].affinity = cpumask_of_cpu(cpu); - irq_desc[irq].chip->set_affinity(irq, cpumask_of_cpu(cpu)); + struct irq_desc *desc = irq_desc + irq; + cpumask_t mask = cpumask_of_cpu(cpu); + + spin_lock_irq(&desc->lock); + desc->affinity = mask; + desc->chip->set_affinity(irq, mask); + spin_unlock_irq(&desc->lock); } static int em_setup(void) diff --git a/arch/arm/plat-iop/pci.c b/arch/arm/plat-iop/pci.c index e2744b7227c579..2b5aa1135b1173 100644 --- a/arch/arm/plat-iop/pci.c +++ b/arch/arm/plat-iop/pci.c @@ -19,6 +19,7 @@ #include <linux/ioport.h> #include <asm/io.h> #include <asm/irq.h> +#include <asm/signal.h> #include <asm/system.h> #include <asm/hardware.h> #include <asm/mach/pci.h> @@ -85,10 +86,10 @@ static int iop3xx_pci_status(void) /* * Simply write the address register and read the configuration - * data. Note that the 4 nop's ensure that we are able to handle + * data. Note that the 4 nops ensure that we are able to handle * a delayed abort (in theory.) */ -static inline u32 iop3xx_read(unsigned long addr) +static u32 iop3xx_read(unsigned long addr) { u32 val; @@ -321,7 +322,7 @@ void __init iop3xx_atu_disable(void) /* Flag to determine whether the ATU is initialized and the PCI bus scanned */ int init_atu; -void iop3xx_pci_preinit(void) +void __init iop3xx_pci_preinit(void) { if (iop3xx_get_init_atu() == IOP3XX_INIT_ATU_ENABLE) { iop3xx_atu_disable(); diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index dd8708ad0a7183..7987aa6e95f88c 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -73,7 +73,7 @@ static const void *get_config(u16 tag, size_t len, int skip, size_t *len_out) } if (info != NULL) { /* Check the length as a lame attempt to check for - * binary inconsistancy. */ + * binary inconsistency. */ if (len != NO_LENGTH_CHECK) { /* Word-align len */ if (len & 0x03) diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 55a4d3be16b6be..88d5b6d9f950b1 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -1172,7 +1172,7 @@ static void set_b1_regs(void) break; default: BUG(); - return; /* Supress warning about uninitialized vars */ + return; /* Suppress warning about uninitialized vars */ } if (omap_dma_in_1510_mode()) { diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index bc46f33aede3dc..1f23f0459e5f68 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -59,8 +59,8 @@ extern unsigned long omapfb_reserve_sram(unsigned long sram_pstart, /* * Depending on the target RAMFS firewall setup, the public usable amount of - * SRAM varies. The default accessable size for all device types is 2k. A GP - * device allows ARM11 but not other initators for full size. This + * SRAM varies. The default accessible size for all device types is 2k. A GP + * device allows ARM11 but not other initiators for full size. This * functionality seems ok until some nice security API happens. */ static int is_sram_locked(void) @@ -71,7 +71,7 @@ static int is_sram_locked(void) type = __raw_readl(VA_CONTROL_STAT) & TYPE_MASK; if (type == GP_DEVICE) { - /* RAMFW: R/W access to all initators for all qualifier sets */ + /* RAMFW: R/W access to all initiators for all qualifier sets */ if (cpu_is_omap242x()) { __raw_writel(0xFF, VA_REQINFOPERM0); /* all q-vects */ __raw_writel(0xCFDE, VA_READPERM0); /* all i-read */ diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c index 25489aafb11398..a5aedf964b8804 100644 --- a/arch/arm/plat-omap/usb.c +++ b/arch/arm/plat-omap/usb.c @@ -177,7 +177,7 @@ static u32 __init omap_usb0_init(unsigned nwires, unsigned is_device) /* NOTE: SPEED and SUSP aren't configured here. OTG hosts * may be able to use I2C requests to set those bits along - * with VBUS switching and overcurrent detction. + * with VBUS switching and overcurrent detection. */ if (cpu_class_is_omap1() && nwires != 6) diff --git a/arch/arm/plat-s3c24xx/common-smdk.c b/arch/arm/plat-s3c24xx/common-smdk.c index 908efa7d745fbc..7ed19b23ce56bf 100644 --- a/arch/arm/plat-s3c24xx/common-smdk.c +++ b/arch/arm/plat-s3c24xx/common-smdk.c @@ -18,6 +18,7 @@ #include <linux/list.h> #include <linux/timer.h> #include <linux/init.h> +#include <linux/sysdev.h> #include <linux/platform_device.h> #include <linux/mtd/mtd.h> @@ -29,6 +30,7 @@ #include <asm/mach/map.h> #include <asm/mach/irq.h> +#include <asm/mach-types.h> #include <asm/hardware.h> #include <asm/io.h> #include <asm/irq.h> @@ -192,6 +194,9 @@ void __init smdk_machine_init(void) s3c2410_gpio_setpin(S3C2410_GPF6, 1); s3c2410_gpio_setpin(S3C2410_GPF7, 1); + if (machine_is_smdk2443()) + smdk_nand_info.twrph0 = 50; + s3c_device_nand.dev.platform_data = &smdk_nand_info; platform_add_devices(smdk_devs, ARRAY_SIZE(smdk_devs)); diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c index 0fe53b39cb2f57..5875da0ae0eb89 100644 --- a/arch/arm/plat-s3c24xx/devs.c +++ b/arch/arm/plat-s3c24xx/devs.c @@ -33,6 +33,7 @@ #include <asm/plat-s3c24xx/devs.h> #include <asm/plat-s3c24xx/cpu.h> +#include <asm/arch/regs-spi.h> /* Serial port registrations */ @@ -402,6 +403,36 @@ struct platform_device s3c_device_sdi = { EXPORT_SYMBOL(s3c_device_sdi); +/* High-speed MMC/SD */ + +static struct resource s3c_hsmmc_resource[] = { + [0] = { + .start = S3C2443_PA_HSMMC, + .end = S3C2443_PA_HSMMC + S3C2443_SZ_HSMMC - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_S3C2443_HSMMC, + .end = IRQ_S3C2443_HSMMC, + .flags = IORESOURCE_IRQ, + } +}; + +static u64 s3c_device_hsmmc_dmamask = 0xffffffffUL; + +struct platform_device s3c_device_hsmmc = { + .name = "s3c-sdhci", + .id = -1, + .num_resources = ARRAY_SIZE(s3c_hsmmc_resource), + .resource = s3c_hsmmc_resource, + .dev = { + .dma_mask = &s3c_device_hsmmc_dmamask, + .coherent_dma_mask = 0xffffffffUL + } +}; + + + /* SPI (0) */ static struct resource s3c_spi0_resource[] = { @@ -437,8 +468,8 @@ EXPORT_SYMBOL(s3c_device_spi0); static struct resource s3c_spi1_resource[] = { [0] = { - .start = S3C24XX_PA_SPI + 0x20, - .end = S3C24XX_PA_SPI + 0x20 + 0x1f, + .start = S3C24XX_PA_SPI + S3C2410_SPI1, + .end = S3C24XX_PA_SPI + S3C2410_SPI1 + 0x1f, .flags = IORESOURCE_MEM, }, [1] = { diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index 6f03c937097937..08d80f2f51f2e5 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -1153,7 +1153,7 @@ EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn); * * hwcfg: the value for xxxSTCn register, * bit 0: 0=increment pointer, 1=leave pointer - * bit 1: 0=soucre is AHB, 1=soucre is APB + * bit 1: 0=source is AHB, 1=source is APB * * devaddr: physical address of the source */ diff --git a/arch/arm/plat-s3c24xx/pm-simtec.c b/arch/arm/plat-s3c24xx/pm-simtec.c index bd965f2feecae5..cb0b3a4ccf1be0 100644 --- a/arch/arm/plat-s3c24xx/pm-simtec.c +++ b/arch/arm/plat-s3c24xx/pm-simtec.c @@ -18,6 +18,7 @@ #include <linux/list.h> #include <linux/timer.h> #include <linux/init.h> +#include <linux/sysdev.h> #include <linux/device.h> #include <asm/mach/arch.h> diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c index c6b03f8ab26020..5692eccdf4d1dd 100644 --- a/arch/arm/plat-s3c24xx/pm.c +++ b/arch/arm/plat-s3c24xx/pm.c @@ -555,7 +555,7 @@ static int s3c2410_pm_enter(suspend_state_t state) __raw_writel(__raw_readl(S3C2410_INTPND), S3C2410_INTPND); __raw_writel(__raw_readl(S3C2410_SRCPND), S3C2410_SRCPND); - /* call cpu specific preperation */ + /* call cpu specific preparation */ pm_cpu_prep(); diff --git a/arch/arm26/kernel/vmlinux-arm26-xip.lds.in b/arch/arm26/kernel/vmlinux-arm26-xip.lds.in index 046a85054018ff..4ec715c25dea7d 100644 --- a/arch/arm26/kernel/vmlinux-arm26-xip.lds.in +++ b/arch/arm26/kernel/vmlinux-arm26-xip.lds.in @@ -64,7 +64,7 @@ SECTIONS .text : { /* Real text segment */ _text = .; /* Text and read-only data */ - *(.text) + TEXT_TEXT SCHED_TEXT LOCK_TEXT /* FIXME - borrowed from arm32 - check*/ *(.fixup) @@ -111,7 +111,7 @@ SECTIONS /* * and the usual data section */ - *(.data) + DATA_DATA CONSTRUCTORS *(.init.data) diff --git a/arch/arm26/kernel/vmlinux-arm26.lds.in b/arch/arm26/kernel/vmlinux-arm26.lds.in index 1d2949e83be8de..6c44f6a17bf71d 100644 --- a/arch/arm26/kernel/vmlinux-arm26.lds.in +++ b/arch/arm26/kernel/vmlinux-arm26.lds.in @@ -65,7 +65,7 @@ SECTIONS .text : { /* Real text segment */ _text = .; /* Text and read-only data */ - *(.text) + TEXT_TEXT SCHED_TEXT LOCK_TEXT *(.fixup) @@ -106,7 +106,7 @@ SECTIONS /* * and the usual data section */ - *(.data) + DATA_DATA CONSTRUCTORS _edata = .; diff --git a/arch/avr32/boards/atstk1000/atstk1000.h b/arch/avr32/boards/atstk1000/atstk1000.h new file mode 100644 index 00000000000000..9a49ed036b72bd --- /dev/null +++ b/arch/avr32/boards/atstk1000/atstk1000.h @@ -0,0 +1,15 @@ +/* + * ATSTK1000 setup code: Daughterboard interface + * + * Copyright (C) 2007 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ARCH_AVR32_BOARDS_ATSTK1000_ATSTK1000_H +#define __ARCH_AVR32_BOARDS_ATSTK1000_ATSTK1000_H + +extern struct atmel_lcdfb_info atstk1000_lcdc_data; + +#endif /* __ARCH_AVR32_BOARDS_ATSTK1000_ATSTK1000_H */ diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c index abe6ca203fa752..fe1dbe2e28f49a 100644 --- a/arch/avr32/boards/atstk1000/atstk1002.c +++ b/arch/avr32/boards/atstk1000/atstk1002.c @@ -16,6 +16,8 @@ #include <linux/types.h> #include <linux/spi/spi.h> +#include <video/atmel_lcdc.h> + #include <asm/io.h> #include <asm/setup.h> #include <asm/arch/at32ap7000.h> @@ -23,6 +25,7 @@ #include <asm/arch/init.h> #include <asm/arch/portmux.h> +#include "atstk1000.h" #define SW2_DEFAULT /* MMCI and UART_A available */ @@ -31,9 +34,7 @@ struct eth_addr { }; static struct eth_addr __initdata hw_addr[2]; - static struct eth_platform_data __initdata eth_data[2]; -static struct lcdc_platform_data atstk1000_fb0_data; static struct spi_board_info spi0_board_info[] __initdata = { { @@ -148,9 +149,8 @@ static int __init atstk1002_init(void) set_hw_addr(at32_add_device_eth(0, ð_data[0])); at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info)); - atstk1000_fb0_data.fbmem_start = fbmem_start; - atstk1000_fb0_data.fbmem_size = fbmem_size; - at32_add_device_lcdc(0, &atstk1000_fb0_data); + at32_add_device_lcdc(0, &atstk1000_lcdc_data, + fbmem_start, fbmem_size); return 0; } diff --git a/arch/avr32/boards/atstk1000/setup.c b/arch/avr32/boards/atstk1000/setup.c index 2bc4b88d7edb82..c9af409ada9a99 100644 --- a/arch/avr32/boards/atstk1000/setup.c +++ b/arch/avr32/boards/atstk1000/setup.c @@ -8,13 +8,56 @@ * published by the Free Software Foundation. */ #include <linux/bootmem.h> +#include <linux/fb.h> #include <linux/init.h> #include <linux/types.h> #include <linux/linkage.h> -#include <asm/setup.h> +#include <video/atmel_lcdc.h> +#include <asm/setup.h> #include <asm/arch/board.h> +#include "atstk1000.h" + /* Initialized by bootloader-specific startup code. */ struct tag *bootloader_tags __initdata; + +static struct fb_videomode __initdata ltv350qv_modes[] = { + { + .name = "320x240 @ 75", + .refresh = 75, + .xres = 320, .yres = 240, + .pixclock = KHZ2PICOS(6891), + + .left_margin = 17, .right_margin = 33, + .upper_margin = 10, .lower_margin = 10, + .hsync_len = 16, .vsync_len = 1, + + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED, + }, +}; + +static struct fb_monspecs __initdata atstk1000_default_monspecs = { + .manufacturer = "SNG", + .monitor = "LTV350QV", + .modedb = ltv350qv_modes, + .modedb_len = ARRAY_SIZE(ltv350qv_modes), + .hfmin = 14820, + .hfmax = 22230, + .vfmin = 60, + .vfmax = 90, + .dclkmax = 30000000, +}; + +struct atmel_lcdfb_info __initdata atstk1000_lcdc_data = { + .default_bpp = 24, + .default_dmacon = ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN, + .default_lcdcon2 = (ATMEL_LCDC_DISTYPE_TFT + | ATMEL_LCDC_INVCLK + | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE + | ATMEL_LCDC_MEMOR_BIG), + .default_monspecs = &atstk1000_default_monspecs, + .guard_time = 2, +}; diff --git a/arch/avr32/kernel/irq.c b/arch/avr32/kernel/irq.c index fd311248c143ce..61f2de266f62a3 100644 --- a/arch/avr32/kernel/irq.c +++ b/arch/avr32/kernel/irq.c @@ -7,15 +7,6 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * This file contains the code used by various IRQ handling routines: - * asking for different IRQ's should be done through these routines - * instead of just grabbing them. Thus setups with different IRQ numbers - * shouldn't result in any weird surprises, and installing new handlers - * should be easier. - * - * IRQ's are in fact implemented a bit like signal handlers for the kernel. - * Naturally it's not a 1:1 relation, but there are similarities. */ #include <linux/interrupt.h> diff --git a/arch/avr32/kernel/kprobes.c b/arch/avr32/kernel/kprobes.c index 004c94b6fc1d62..4942ee662e0b53 100644 --- a/arch/avr32/kernel/kprobes.c +++ b/arch/avr32/kernel/kprobes.c @@ -179,7 +179,7 @@ static int __kprobes post_kprobe_handler(struct pt_regs *regs) return 1; } -static int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr) +int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr) { struct kprobe *cur = kprobe_running(); @@ -216,11 +216,6 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, if (post_kprobe_handler(args->regs)) ret = NOTIFY_STOP; break; - case DIE_FAULT: - if (kprobe_running() - && kprobe_fault_handler(args->regs, args->trapnr)) - ret = NOTIFY_STOP; - break; default: break; } diff --git a/arch/avr32/kernel/syscall_table.S b/arch/avr32/kernel/syscall_table.S index 07f6a6fa340de6..75c81f2dd0b3a6 100644 --- a/arch/avr32/kernel/syscall_table.S +++ b/arch/avr32/kernel/syscall_table.S @@ -292,4 +292,7 @@ sys_call_table: .long sys_shmdt .long sys_shmctl .long sys_utimensat + .long sys_signalfd + .long sys_timerfd /* 280 */ + .long sys_eventfd .long sys_ni_syscall /* r8 is saturated at nr_syscalls */ diff --git a/arch/avr32/kernel/vmlinux.lds.c b/arch/avr32/kernel/vmlinux.lds.c index e7f72c995a3251..db0438f35c0066 100644 --- a/arch/avr32/kernel/vmlinux.lds.c +++ b/arch/avr32/kernel/vmlinux.lds.c @@ -76,7 +76,7 @@ SECTIONS . = 0x100; *(.scall.text) *(.irq.text) - *(.text) + TEXT_TEXT SCHED_TEXT LOCK_TEXT KPROBES_TEXT @@ -112,7 +112,7 @@ SECTIONS /* And the rest... */ *(.data.rel*) - *(.data) + DATA_DATA CONSTRUCTORS _edata = .; diff --git a/arch/avr32/mach-at32ap/at32ap7000.c b/arch/avr32/mach-at32ap/at32ap7000.c index 56db45b99a0f1f..1d2bf347a1d653 100644 --- a/arch/avr32/mach-at32ap/at32ap7000.c +++ b/arch/avr32/mach-at32ap/at32ap7000.c @@ -6,6 +6,7 @@ * published by the Free Software Foundation. */ #include <linux/clk.h> +#include <linux/fb.h> #include <linux/init.h> #include <linux/platform_device.h> #include <linux/spi/spi.h> @@ -17,6 +18,8 @@ #include <asm/arch/portmux.h> #include <asm/arch/sm.h> +#include <video/atmel_lcdc.h> + #include "clock.h" #include "hmatrix.h" #include "pio.h" @@ -881,20 +884,26 @@ at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n) /* -------------------------------------------------------------------- * LCDC * -------------------------------------------------------------------- */ -static struct lcdc_platform_data lcdc0_data; -static struct resource lcdc0_resource[] = { +static struct atmel_lcdfb_info atmel_lcdfb0_data; +static struct resource atmel_lcdfb0_resource[] = { { .start = 0xff000000, .end = 0xff000fff, .flags = IORESOURCE_MEM, }, IRQ(1), + { + /* Placeholder for pre-allocated fb memory */ + .start = 0x00000000, + .end = 0x00000000, + .flags = 0, + }, }; -DEFINE_DEV_DATA(lcdc, 0); -DEV_CLK(hclk, lcdc0, hsb, 7); -static struct clk lcdc0_pixclk = { - .name = "pixclk", - .dev = &lcdc0_device.dev, +DEFINE_DEV_DATA(atmel_lcdfb, 0); +DEV_CLK(hck1, atmel_lcdfb0, hsb, 7); +static struct clk atmel_lcdfb0_pixclk = { + .name = "lcdc_clk", + .dev = &atmel_lcdfb0_device.dev, .mode = genclk_mode, .get_rate = genclk_get_rate, .set_rate = genclk_set_rate, @@ -903,13 +912,34 @@ static struct clk lcdc0_pixclk = { }; struct platform_device *__init -at32_add_device_lcdc(unsigned int id, struct lcdc_platform_data *data) +at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data, + unsigned long fbmem_start, unsigned long fbmem_len) { struct platform_device *pdev; + struct atmel_lcdfb_info *info; + struct fb_monspecs *monspecs; + struct fb_videomode *modedb; + unsigned int modedb_size; + + /* + * Do a deep copy of the fb data, monspecs and modedb. Make + * sure all allocations are done before setting up the + * portmux. + */ + monspecs = kmemdup(data->default_monspecs, + sizeof(struct fb_monspecs), GFP_KERNEL); + if (!monspecs) + return NULL; + + modedb_size = sizeof(struct fb_videomode) * monspecs->modedb_len; + modedb = kmemdup(monspecs->modedb, modedb_size, GFP_KERNEL); + if (!modedb) + goto err_dup_modedb; + monspecs->modedb = modedb; switch (id) { case 0: - pdev = &lcdc0_device; + pdev = &atmel_lcdfb0_device; select_peripheral(PC(19), PERIPH_A, 0); /* CC */ select_peripheral(PC(20), PERIPH_A, 0); /* HSYNC */ select_peripheral(PC(21), PERIPH_A, 0); /* PCLK */ @@ -942,19 +972,32 @@ at32_add_device_lcdc(unsigned int id, struct lcdc_platform_data *data) select_peripheral(PD(16), PERIPH_A, 0); /* DATA22 */ select_peripheral(PD(17), PERIPH_A, 0); /* DATA23 */ - clk_set_parent(&lcdc0_pixclk, &pll0); - clk_set_rate(&lcdc0_pixclk, clk_get_rate(&pll0)); + clk_set_parent(&atmel_lcdfb0_pixclk, &pll0); + clk_set_rate(&atmel_lcdfb0_pixclk, clk_get_rate(&pll0)); break; default: - return NULL; + goto err_invalid_id; } - memcpy(pdev->dev.platform_data, data, - sizeof(struct lcdc_platform_data)); + if (fbmem_len) { + pdev->resource[2].start = fbmem_start; + pdev->resource[2].end = fbmem_start + fbmem_len - 1; + pdev->resource[2].flags = IORESOURCE_MEM; + } + + info = pdev->dev.platform_data; + memcpy(info, data, sizeof(struct atmel_lcdfb_info)); + info->default_monspecs = monspecs; platform_device_register(pdev); return pdev; + +err_invalid_id: + kfree(modedb); +err_dup_modedb: + kfree(monspecs); + return NULL; } /* -------------------------------------------------------------------- @@ -1037,8 +1080,8 @@ struct clk *at32_clock_list[] = { &macb1_pclk, &atmel_spi0_spi_clk, &atmel_spi1_spi_clk, - &lcdc0_hclk, - &lcdc0_pixclk, + &atmel_lcdfb0_hck1, + &atmel_lcdfb0_pixclk, &gclk0, &gclk1, &gclk2, @@ -1077,7 +1120,7 @@ void __init at32_clock_init(void) genclk_init_parent(&gclk2); genclk_init_parent(&gclk3); genclk_init_parent(&gclk4); - genclk_init_parent(&lcdc0_pixclk); + genclk_init_parent(&atmel_lcdfb0_pixclk); /* * Turn on all clocks that have at least one user already, and diff --git a/arch/avr32/mm/fault.c b/arch/avr32/mm/fault.c index 88b00b15970f90..e011f1ce1875f5 100644 --- a/arch/avr32/mm/fault.c +++ b/arch/avr32/mm/fault.c @@ -12,41 +12,30 @@ #include <linux/mm.h> #include <linux/module.h> #include <linux/pagemap.h> - #include <linux/kdebug.h> +#include <linux/kprobes.h> + #include <asm/mmu_context.h> #include <asm/sysreg.h> #include <asm/tlb.h> #include <asm/uaccess.h> #ifdef CONFIG_KPROBES -ATOMIC_NOTIFIER_HEAD(notify_page_fault_chain); - -/* Hook to register for page fault notifications */ -int register_page_fault_notifier(struct notifier_block *nb) +static inline int notify_page_fault(struct pt_regs *regs, int trap) { - return atomic_notifier_chain_register(¬ify_page_fault_chain, nb); -} + int ret = 0; -int unregister_page_fault_notifier(struct notifier_block *nb) -{ - return atomic_notifier_chain_unregister(¬ify_page_fault_chain, nb); -} + if (!user_mode(regs)) { + if (kprobe_running() && kprobe_fault_handler(regs, trap)) + ret = 1; + } -static inline int notify_page_fault(enum die_val val, struct pt_regs *regs, - int trap, int sig) -{ - struct die_args args = { - .regs = regs, - .trapnr = trap, - }; - return atomic_notifier_call_chain(¬ify_page_fault_chain, val, &args); + return ret; } #else -static inline int notify_page_fault(enum die_val val, struct pt_regs *regs, - int trap, int sig) +static inline int notify_page_fault(struct pt_regs *regs, int trap) { - return NOTIFY_DONE; + return 0; } #endif @@ -76,8 +65,7 @@ asmlinkage void do_page_fault(unsigned long ecr, struct pt_regs *regs) long signr; int code; - if (notify_page_fault(DIE_PAGE_FAULT, regs, - ecr, SIGSEGV) == NOTIFY_STOP) + if (notify_page_fault(regs, ecr)) return; address = sysreg_read(TLBEAR); diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index 1a493050932579..b1b111bb2f3aff 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -25,6 +25,10 @@ config BLACKFIN bool default y +config ZONE_DMA + bool + default y + config BFIN bool default y @@ -189,7 +193,7 @@ config BFIN537_BLUETECHNIX_CM CM-BF537 support for EVAL- and DEV-Board. config BFIN561_BLUETECHNIX_CM - bool "BF561-CM" + bool "Bluetechnix CM-BF561" depends on (BF561) help CM-BF561 support for EVAL- and DEV-Board. @@ -200,6 +204,12 @@ config BFIN561_EZKIT help BF561-EZKIT-LITE board Support. +config BFIN561_TEPLA + bool "BF561-TEPLA" + depends on (BF561) + help + BF561-TEPLA board Support. + config PNAV10 bool "PNAV 1.0 board" depends on (BF537) @@ -560,14 +570,6 @@ endchoice source "mm/Kconfig" -config LARGE_ALLOCS - bool "Allow allocating large blocks (> 1MB) of memory" - help - Allow the slab memory allocator to keep chains for very large - memory sizes - upto 32MB. You may need this if your system has - a lot of RAM, and you need to able to allocate very large - contiguous chunks. If unsure, say N. - config BFIN_DMA_5XX bool "Enable DMA Support" depends on (BF533 || BF532 || BF531 || BF537 || BF536 || BF534 || BF561) diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile index 52d4dbdb2b1aeb..75e89c324756bb 100644 --- a/arch/blackfin/Makefile +++ b/arch/blackfin/Makefile @@ -15,6 +15,7 @@ GZFLAGS := -9 CFLAGS_MODULE += -mlong-calls KALLSYMS += --symbol-prefix=_ +KBUILD_DEFCONFIG := BF537-STAMP_defconfig # setup the machine name and the machine dependent settings machine-$(CONFIG_BF531) := bf533 diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig new file mode 100644 index 00000000000000..377c8e05e4ab4c --- /dev/null +++ b/arch/blackfin/configs/BF533-EZKIT_defconfig @@ -0,0 +1,1014 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.19.3 +# +# CONFIG_MMU is not set +# CONFIG_FPU is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +CONFIG_BLACKFIN=y +CONFIG_BFIN=y +CONFIG_SEMAPHORE_SLEEPERS=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_UCLINUX=y +CONFIG_FORCE_MAX_ZONEORDER=14 +CONFIG_IRQCHIP_DEMUX_GPIO=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 +# CONFIG_LIMIT_PAGECACHE is not set +CONFIG_BUDDY=y +# CONFIG_NP2 is not set +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y +CONFIG_TINY_SHMEM=y +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_BLK_DEV_IO_TRACE is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_PREEMPT_NONE is not set +CONFIG_PREEMPT_VOLUNTARY=y +# CONFIG_PREEMPT is not set + +# +# Blackfin Processor Options +# + +# +# Processor and Board Settings +# +# CONFIG_BF531 is not set +# CONFIG_BF532 is not set +CONFIG_BF533=y +# CONFIG_BF534 is not set +# CONFIG_BF535 is not set +# CONFIG_BF536 is not set +# CONFIG_BF537 is not set +# CONFIG_BF561 is not set +# CONFIG_BF_REV_0_2 is not set +CONFIG_BF_REV_0_3=y +# CONFIG_BF_REV_0_4 is not set +# CONFIG_BF_REV_0_5 is not set +CONFIG_BFIN_SINGLE_CORE=y +CONFIG_BFIN533_EZKIT=y +# CONFIG_BFIN533_STAMP is not set +# CONFIG_BFIN537_STAMP is not set +# CONFIG_BFIN533_BLUETECHNIX_CM is not set +# CONFIG_BFIN537_BLUETECHNIX_CM is not set +# CONFIG_BFIN561_BLUETECHNIX_CM is not set +# CONFIG_BFIN561_EZKIT is not set +# CONFIG_PNAV10 is not set +# CONFIG_GENERIC_BOARD is not set +CONFIG_MEM_MT48LC16M16A2TG_75=y + +# +# BF533/2/1 Specific Configuration +# + +# +# Interrupt Priority Assignment +# + +# +# Priority +# +CONFIG_UART_ERROR=7 +CONFIG_SPORT0_ERROR=7 +CONFIG_SPI_ERROR=7 +CONFIG_SPORT1_ERROR=7 +CONFIG_PPI_ERROR=7 +CONFIG_DMA_ERROR=7 +CONFIG_PLLWAKE_ERROR=7 +CONFIG_RTC_ERROR=8 +CONFIG_DMA0_PPI=8 +CONFIG_DMA1_SPORT0RX=9 +CONFIG_DMA2_SPORT0TX=9 +CONFIG_DMA3_SPORT1RX=9 +CONFIG_DMA4_SPORT1TX=9 +CONFIG_DMA5_SPI=10 +CONFIG_DMA6_UARTRX=10 +CONFIG_DMA7_UARTTX=10 +CONFIG_TIMER0=11 +CONFIG_TIMER1=11 +CONFIG_TIMER2=11 +CONFIG_PFA=12 +CONFIG_PFB=12 +CONFIG_MEMDMA0=13 +CONFIG_MEMDMA1=13 +CONFIG_WDTIMER=13 + +# +# Board customizations +# + +# +# Board Setup +# +CONFIG_CLKIN_HZ=27000000 +CONFIG_MEM_SIZE=32 +CONFIG_MEM_ADD_WIDTH=9 +CONFIG_BOOT_LOAD=0x1000 + +# +# Console UART Setup +# +# CONFIG_BAUD_9600 is not set +# CONFIG_BAUD_19200 is not set +# CONFIG_BAUD_38400 is not set +CONFIG_BAUD_57600=y +# CONFIG_BAUD_115200 is not set +CONFIG_BAUD_NO_PARITY=y +# CONFIG_BAUD_PARITY is not set +CONFIG_BAUD_1_STOPBIT=y +# CONFIG_BAUD_2_STOPBIT is not set + +# +# Blackfin Kernel Optimizations +# + +# +# Timer Tick +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 + +# +# Memory Optimizations +# +CONFIG_I_ENTRY_L1=y +CONFIG_EXCPT_IRQ_SYSC_L1=y +CONFIG_DO_IRQ_L1=y +CONFIG_CORE_TIMER_IRQ_L1=y +CONFIG_IDLE_L1=y +CONFIG_SCHEDULE_L1=y +CONFIG_ARITHMETIC_OPS_L1=y +CONFIG_ACCESS_OK_L1=y +CONFIG_MEMSET_L1=y +CONFIG_MEMCPY_L1=y +CONFIG_SYS_BFIN_SPINLOCK_L1=y +# CONFIG_IP_CHECKSUM_L1 is not set +# CONFIG_SYSCALL_TAB_L1 is not set +# CONFIG_CPLB_SWITCH_TAB_L1 is not set +CONFIG_RAMKERNEL=y +# CONFIG_ROMKERNEL is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_LARGE_ALLOCS=y +CONFIG_BFIN_DMA_5XX=y +# CONFIG_DMA_UNCACHED_2M is not set +CONFIG_DMA_UNCACHED_1M=y +# CONFIG_DMA_UNCACHED_NONE is not set + +# +# Cache Support +# +CONFIG_BLKFIN_CACHE=y +CONFIG_BLKFIN_DCACHE=y +# CONFIG_BLKFIN_DCACHE_BANKA is not set +# CONFIG_BLKFIN_CACHE_LOCK is not set +# CONFIG_BLKFIN_WB is not set +CONFIG_BLKFIN_WT=y +CONFIG_L1_MAX_PIECE=16 + +# +# Clock Settings +# +# CONFIG_BFIN_KERNEL_CLOCK is not set + +# +# Asynchonous Memory Configuration +# + +# +# EBIU_AMBCTL Global Control +# +CONFIG_C_AMCKEN=y +CONFIG_C_CDPRIO=y +# CONFIG_C_AMBEN is not set +# CONFIG_C_AMBEN_B0 is not set +# CONFIG_C_AMBEN_B0_B1 is not set +# CONFIG_C_AMBEN_B0_B1_B2 is not set +CONFIG_C_AMBEN_ALL=y + +# +# EBIU_AMBCTL Control +# +CONFIG_BANK_0=0x7BB0 +CONFIG_BANK_1=0x7BB0 +CONFIG_BANK_2=0x7BB0 +CONFIG_BANK_3=0x99B3 + +# +# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# +# CONFIG_PCI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# + +# +# Executable file formats +# +CONFIG_BINFMT_ELF_FDPIC=y +CONFIG_BINFMT_FLAT=y +CONFIG_BINFMT_ZFLAT=y +# CONFIG_BINFMT_SHARED_FLAT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +CONFIG_PM=y +CONFIG_PM_LEGACY=y +# CONFIG_PM_DEBUG is not set +# CONFIG_PM_SYSFS_DEPRECATED is not set +CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR=y +# CONFIG_PM_WAKEUP_BY_GPIO is not set +# CONFIG_PM_WAKEUP_GPIO_API is not set +CONFIG_PM_WAKEUP_SIC_IWR=0x100000 + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETLABEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=m +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +CONFIG_MTD_JEDECPROBE=m +CONFIG_MTD_GEN_PROBE=m +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_MW320D=m +CONFIG_MTD_RAM=y +CONFIG_MTD_ROM=m +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_BF5xx=m +CONFIG_BFIN_FLASH_SIZE=0x400000 +CONFIG_EBIU_FLASH_BASE=0x20000000 + +# +# FLASH_EBIU_AMBCTL Control +# +CONFIG_BFIN_FLASH_BANK_0=0x7BB0 +CONFIG_BFIN_FLASH_BANK_1=0x7BB0 +CONFIG_BFIN_FLASH_BANK_2=0x7BB0 +CONFIG_BFIN_FLASH_BANK_3=0x7BB0 +# CONFIG_MTD_UCLINUX is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# Misc devices +# +# CONFIG_TIFM_CORE is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_SMC91X=y + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_AD9960 is not set +# CONFIG_SPI_ADC_BF533 is not set +# CONFIG_BF533_PFLAGS is not set +# CONFIG_BF5xx_PPIFCD is not set +# CONFIG_BF5xx_TIMERS is not set +# CONFIG_BF5xx_PPI is not set +# CONFIG_BFIN_SPORT is not set +# CONFIG_BFIN_TIMER_LATENCY is not set +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_BFIN=y +CONFIG_SERIAL_BFIN_CONSOLE=y +CONFIG_SERIAL_BFIN_DMA=y +# CONFIG_SERIAL_BFIN_PIO is not set +CONFIG_SERIAL_BFIN_UART0=y +# CONFIG_BFIN_UART0_CTSRTS is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_BFIN_SPORT is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# CAN, the car bus and industrial fieldbus +# +# CONFIG_CAN4LINUX is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=y +# CONFIG_GEN_RTC is not set +CONFIG_BLACKFIN_DPMC=y +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set + +# +# RTC drivers +# +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_TEST is not set +# CONFIG_RTC_DRV_V3020 is not set +CONFIG_RTC_DRV_BFIN=y + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# PBX support +# +# CONFIG_PBX is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +# CONFIG_EXT2_FS_POSIX_ACL is not set +# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +# CONFIG_DNOTIFY is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_YAFFS_FS=m +CONFIG_YAFFS_YAFFS1=y +# CONFIG_YAFFS_DOES_ECC is not set +CONFIG_YAFFS_YAFFS2=y +CONFIG_YAFFS_AUTO_YAFFS2=y +# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set +CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10 +# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set +# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set +CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y +# CONFIG_JFFS_FS is not set +CONFIG_JFFS2_FS=m +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_UNWIND_INFO is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_SERIAL_EARLY_INIT is not set +CONFIG_DEBUG_HUNT_FOR_ZERO=y +# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set +# CONFIG_BOOTPARAM is not set +# CONFIG_NO_KERNEL_MSG is not set +CONFIG_CPLB_INFO=y +# CONFIG_NO_ACCESS_CHECK is not set + +# +# Security options +# +# CONFIG_KEYS is not set +CONFIG_SECURITY=y +# CONFIG_SECURITY_NETWORK is not set +CONFIG_SECURITY_CAPABILITIES=y + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m +CONFIG_PLIST=y diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig new file mode 100644 index 00000000000000..14a948c288a565 --- /dev/null +++ b/arch/blackfin/configs/BF533-STAMP_defconfig @@ -0,0 +1,1296 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.20.4 +# +# CONFIG_MMU is not set +# CONFIG_FPU is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +CONFIG_BLACKFIN=y +CONFIG_BFIN=y +CONFIG_SEMAPHORE_SLEEPERS=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +# CONFIG_GENERIC_TIME is not set +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_FORCE_MAX_ZONEORDER=14 +CONFIG_IRQCHIP_DEMUX_GPIO=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 +# CONFIG_LIMIT_PAGECACHE is not set +CONFIG_BUDDY=y +# CONFIG_NP2 is not set +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y +CONFIG_TINY_SHMEM=y +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_PREEMPT_NONE is not set +CONFIG_PREEMPT_VOLUNTARY=y +# CONFIG_PREEMPT is not set + +# +# Blackfin Processor Options +# + +# +# Processor and Board Settings +# +# CONFIG_BF531 is not set +# CONFIG_BF532 is not set +CONFIG_BF533=y +# CONFIG_BF534 is not set +# CONFIG_BF536 is not set +# CONFIG_BF537 is not set +# CONFIG_BF561 is not set +# CONFIG_BF_REV_0_2 is not set +CONFIG_BF_REV_0_3=y +# CONFIG_BF_REV_0_4 is not set +# CONFIG_BF_REV_0_5 is not set +CONFIG_BFIN_SINGLE_CORE=y +# CONFIG_BFIN533_EZKIT is not set +CONFIG_BFIN533_STAMP=y +# CONFIG_BFIN537_STAMP is not set +# CONFIG_BFIN533_BLUETECHNIX_CM is not set +# CONFIG_BFIN537_BLUETECHNIX_CM is not set +# CONFIG_BFIN561_BLUETECHNIX_CM is not set +# CONFIG_BFIN561_EZKIT is not set +# CONFIG_PNAV10 is not set +# CONFIG_GENERIC_BOARD is not set +CONFIG_MEM_MT48LC64M4A2FB_7E=y +CONFIG_BFIN_SHARED_FLASH_ENET=y + +# +# BF533/2/1 Specific Configuration +# + +# +# Interrupt Priority Assignment +# + +# +# Priority +# +CONFIG_UART_ERROR=7 +CONFIG_SPORT0_ERROR=7 +CONFIG_SPI_ERROR=7 +CONFIG_SPORT1_ERROR=7 +CONFIG_PPI_ERROR=7 +CONFIG_DMA_ERROR=7 +CONFIG_PLLWAKE_ERROR=7 +CONFIG_RTC_ERROR=8 +CONFIG_DMA0_PPI=8 +CONFIG_DMA1_SPORT0RX=9 +CONFIG_DMA2_SPORT0TX=9 +CONFIG_DMA3_SPORT1RX=9 +CONFIG_DMA4_SPORT1TX=9 +CONFIG_DMA5_SPI=10 +CONFIG_DMA6_UARTRX=10 +CONFIG_DMA7_UARTTX=10 +CONFIG_TIMER0=11 +CONFIG_TIMER1=11 +CONFIG_TIMER2=11 +CONFIG_PFA=12 +CONFIG_PFB=12 +CONFIG_MEMDMA0=13 +CONFIG_MEMDMA1=13 +CONFIG_WDTIMER=13 + +# +# Board customizations +# +# CONFIG_CMDLINE_BOOL is not set + +# +# Board Setup +# +CONFIG_CLKIN_HZ=11059200 +CONFIG_MEM_SIZE=128 +CONFIG_MEM_ADD_WIDTH=11 +CONFIG_ENET_FLASH_PIN=0 +CONFIG_BOOT_LOAD=0x1000 + +# +# LED Status Indicators +# +# CONFIG_BFIN_ALIVE_LED is not set +# CONFIG_BFIN_IDLE_LED is not set +CONFIG_BFIN_ALIVE_LED_PORT=0xFFC00700 +CONFIG_BFIN_ALIVE_LED_DPORT=0xFFC00730 +CONFIG_BFIN_IDLE_LED_PORT=0xFFC00700 +CONFIG_BFIN_IDLE_LED_DPORT=0xFFC00730 + +# +# Console UART Setup +# +# CONFIG_BAUD_9600 is not set +# CONFIG_BAUD_19200 is not set +# CONFIG_BAUD_38400 is not set +CONFIG_BAUD_57600=y +# CONFIG_BAUD_115200 is not set +CONFIG_BAUD_NO_PARITY=y +# CONFIG_BAUD_PARITY is not set +CONFIG_BAUD_1_STOPBIT=y +# CONFIG_BAUD_2_STOPBIT is not set + +# +# Blackfin Kernel Optimizations +# + +# +# Timer Tick +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 + +# +# Memory Optimizations +# +CONFIG_I_ENTRY_L1=y +CONFIG_EXCPT_IRQ_SYSC_L1=y +CONFIG_DO_IRQ_L1=y +CONFIG_CORE_TIMER_IRQ_L1=y +CONFIG_IDLE_L1=y +CONFIG_SCHEDULE_L1=y +CONFIG_ARITHMETIC_OPS_L1=y +CONFIG_ACCESS_OK_L1=y +CONFIG_MEMSET_L1=y +CONFIG_MEMCPY_L1=y +CONFIG_SYS_BFIN_SPINLOCK_L1=y +# CONFIG_IP_CHECKSUM_L1 is not set +# CONFIG_SYSCALL_TAB_L1 is not set +# CONFIG_CPLB_SWITCH_TAB_L1 is not set +CONFIG_RAMKERNEL=y +# CONFIG_ROMKERNEL is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_LARGE_ALLOCS=y +CONFIG_BFIN_DMA_5XX=y +# CONFIG_DMA_UNCACHED_2M is not set +CONFIG_DMA_UNCACHED_1M=y +# CONFIG_DMA_UNCACHED_NONE is not set + +# +# Cache Support +# +CONFIG_BLKFIN_CACHE=y +CONFIG_BLKFIN_DCACHE=y +# CONFIG_BLKFIN_DCACHE_BANKA is not set +# CONFIG_BLKFIN_CACHE_LOCK is not set +# CONFIG_BLKFIN_WB is not set +CONFIG_BLKFIN_WT=y +CONFIG_L1_MAX_PIECE=16 + +# +# Clock Settings +# +# CONFIG_BFIN_KERNEL_CLOCK is not set + +# +# Asynchonous Memory Configuration +# + +# +# EBIU_AMBCTL Global Control +# +CONFIG_C_AMCKEN=y +CONFIG_C_CDPRIO=y +# CONFIG_C_AMBEN is not set +# CONFIG_C_AMBEN_B0 is not set +# CONFIG_C_AMBEN_B0_B1 is not set +# CONFIG_C_AMBEN_B0_B1_B2 is not set +CONFIG_C_AMBEN_ALL=y + +# +# EBIU_AMBCTL Control +# +CONFIG_BANK_0=0x7BB0 +CONFIG_BANK_1=0x7BB0 +CONFIG_BANK_2=0x7BB0 +CONFIG_BANK_3=0x99B3 + +# +# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# +# CONFIG_PCI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# + +# +# Executable file formats +# +CONFIG_BINFMT_ELF_FDPIC=y +CONFIG_BINFMT_FLAT=y +CONFIG_BINFMT_ZFLAT=y +# CONFIG_BINFMT_SHARED_FLAT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +CONFIG_PM=y +CONFIG_PM_LEGACY=y +# CONFIG_PM_DEBUG is not set +# CONFIG_PM_SYSFS_DEPRECATED is not set +CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR=y +# CONFIG_PM_WAKEUP_BY_GPIO is not set +# CONFIG_PM_WAKEUP_GPIO_API is not set +CONFIG_PM_WAKEUP_SIC_IWR=0x100000 + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETLABEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +CONFIG_IRDA=m + +# +# IrDA protocols +# +CONFIG_IRLAN=m +CONFIG_IRCOMM=m +# CONFIG_IRDA_ULTRA is not set + +# +# IrDA options +# +CONFIG_IRDA_CACHE_LAST_LSAP=y +# CONFIG_IRDA_FAST_RR is not set +# CONFIG_IRDA_DEBUG is not set + +# +# Infrared-port device drivers +# + +# +# SIR device drivers +# +CONFIG_IRTTY_SIR=m + +# +# Dongle support +# +# CONFIG_DONGLE is not set + +# +# Old SIR device drivers +# +# CONFIG_IRPORT_SIR is not set + +# +# Old Serial dongle support +# + +# +# FIR device drivers +# +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=m +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +CONFIG_MTD_JEDECPROBE=m +CONFIG_MTD_GEN_PROBE=m +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_MW320D=m +CONFIG_MTD_RAM=y +CONFIG_MTD_ROM=m +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_BF5xx=m +CONFIG_BFIN_FLASH_SIZE=0x400000 +CONFIG_EBIU_FLASH_BASE=0x20000000 + +# +# FLASH_EBIU_AMBCTL Control +# +CONFIG_BFIN_FLASH_BANK_0=0x7BB0 +CONFIG_BFIN_FLASH_BANK_1=0x7BB0 +CONFIG_BFIN_FLASH_BANK_2=0x7BB0 +CONFIG_BFIN_FLASH_BANK_3=0x7BB0 +# CONFIG_MTD_UCLINUX is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# Misc devices +# +# CONFIG_TIFM_CORE is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_SMC91X=y + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=m +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_UINPUT is not set +# CONFIG_BF53X_PFBUTTONS is not set +CONFIG_TWI_KEYPAD=m +CONFIG_BFIN_TWIKEYPAD_IRQ_PFX=39 + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_AD9960 is not set +# CONFIG_SPI_ADC_BF533 is not set +# CONFIG_BF533_PFLAGS is not set +# CONFIG_BF5xx_PPIFCD is not set +# CONFIG_BF5xx_TIMERS is not set +# CONFIG_BF5xx_PPI is not set +CONFIG_BFIN_SPORT=y +# CONFIG_BFIN_TIMER_LATENCY is not set +CONFIG_TWI_LCD=m +CONFIG_TWI_LCD_SLAVE_ADDR=34 +# CONFIG_AD5304 is not set +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_BFIN=y +CONFIG_SERIAL_BFIN_CONSOLE=y +CONFIG_SERIAL_BFIN_DMA=y +# CONFIG_SERIAL_BFIN_PIO is not set +CONFIG_SERIAL_BFIN_UART0=y +# CONFIG_BFIN_UART0_CTSRTS is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_BFIN_SPORT is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# CAN, the car bus and industrial fieldbus +# +# CONFIG_CAN4LINUX is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=y +# CONFIG_GEN_RTC is not set +CONFIG_BLACKFIN_DPMC=y +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +CONFIG_I2C=m +CONFIG_I2C_CHARDEV=m + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=m +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_BLACKFIN_GPIO is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_AD5252 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCF8575 is not set +# CONFIG_SENSORS_PCA9543 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +CONFIG_SPI=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set + +# +# SPI Protocol Masters +# +CONFIG_SPI_BFIN=y + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +CONFIG_FIRMWARE_EDID=y +CONFIG_FB=m +CONFIG_FB_CFB_FILLRECT=m +CONFIG_FB_CFB_COPYAREA=m +CONFIG_FB_CFB_IMAGEBLIT=m +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set +CONFIG_FB_BFIN_7171=m +CONFIG_FB_BFIN_7393=m +CONFIG_NTSC=y +# CONFIG_PAL is not set +# CONFIG_NTSC_640x480 is not set +# CONFIG_PAL_640x480 is not set +# CONFIG_NTSC_YCBCR is not set +# CONFIG_PAL_YCBCR is not set +CONFIG_ADV7393_1XMEM=y +# CONFIG_ADV7393_2XMEM is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Logo configuration +# +# CONFIG_LOGO is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +CONFIG_SOUND=m + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set + +# +# HID Devices +# +CONFIG_HID=y + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_SPI_MMC is not set +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set + +# +# RTC drivers +# +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_TEST is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_V3020 is not set +CONFIG_RTC_DRV_BFIN=y + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# Virtualization +# + +# +# PBX support +# +# CONFIG_PBX is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +# CONFIG_EXT2_FS_POSIX_ACL is not set +# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_YAFFS_FS=m +CONFIG_YAFFS_YAFFS1=y +# CONFIG_YAFFS_DOES_ECC is not set +CONFIG_YAFFS_YAFFS2=y +CONFIG_YAFFS_AUTO_YAFFS2=y +# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set +CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10 +# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set +# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set +CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y +CONFIG_JFFS2_FS=m +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +# CONFIG_SMB_NLS_DEFAULT is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=m +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_SERIAL_EARLY_INIT is not set +CONFIG_DEBUG_HUNT_FOR_ZERO=y +# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set +CONFIG_CPLB_INFO=y +CONFIG_ACCESS_CHECK=y + +# +# Security options +# +# CONFIG_KEYS is not set +CONFIG_SECURITY=y +# CONFIG_SECURITY_NETWORK is not set +CONFIG_SECURITY_CAPABILITIES=y + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m +CONFIG_PLIST=y +CONFIG_IOMAP_COPY=y diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig new file mode 100644 index 00000000000000..8ed67dc450fdc4 --- /dev/null +++ b/arch/blackfin/configs/BF537-STAMP_defconfig @@ -0,0 +1,1332 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.20.4 +# +# CONFIG_MMU is not set +# CONFIG_FPU is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +CONFIG_BLACKFIN=y +CONFIG_BFIN=y +CONFIG_SEMAPHORE_SLEEPERS=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +# CONFIG_GENERIC_TIME is not set +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_FORCE_MAX_ZONEORDER=14 +CONFIG_IRQCHIP_DEMUX_GPIO=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 +# CONFIG_LIMIT_PAGECACHE is not set +CONFIG_BUDDY=y +# CONFIG_NP2 is not set +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y +CONFIG_TINY_SHMEM=y +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_PREEMPT_NONE is not set +CONFIG_PREEMPT_VOLUNTARY=y +# CONFIG_PREEMPT is not set + +# +# Blackfin Processor Options +# + +# +# Processor and Board Settings +# +# CONFIG_BF531 is not set +# CONFIG_BF532 is not set +# CONFIG_BF533 is not set +# CONFIG_BF534 is not set +# CONFIG_BF536 is not set +CONFIG_BF537=y +# CONFIG_BF561 is not set +CONFIG_BF_REV_0_2=y +# CONFIG_BF_REV_0_3 is not set +# CONFIG_BF_REV_0_4 is not set +# CONFIG_BF_REV_0_5 is not set +CONFIG_BFIN_SINGLE_CORE=y +# CONFIG_BFIN533_EZKIT is not set +# CONFIG_BFIN533_STAMP is not set +CONFIG_BFIN537_STAMP=y +# CONFIG_BFIN533_BLUETECHNIX_CM is not set +# CONFIG_BFIN537_BLUETECHNIX_CM is not set +# CONFIG_BFIN561_BLUETECHNIX_CM is not set +# CONFIG_BFIN561_EZKIT is not set +# CONFIG_PNAV10 is not set +# CONFIG_GENERIC_BOARD is not set +CONFIG_MEM_MT48LC32M8A2_75=y +CONFIG_IRQ_PLL_WAKEUP=7 + +# +# BF537 Specific Configuration +# + +# +# PORT F/G Selection +# +CONFIG_BF537_PORT_F=y +# CONFIG_BF537_PORT_G is not set +# CONFIG_BF537_PORT_H is not set + +# +# Interrupt Priority Assignment +# + +# +# Priority +# +CONFIG_IRQ_DMA_ERROR=7 +CONFIG_IRQ_ERROR=7 +CONFIG_IRQ_RTC=8 +CONFIG_IRQ_PPI=8 +CONFIG_IRQ_SPORT0_RX=9 +CONFIG_IRQ_SPORT0_TX=9 +CONFIG_IRQ_SPORT1_RX=9 +CONFIG_IRQ_SPORT1_TX=9 +CONFIG_IRQ_TWI=10 +CONFIG_IRQ_SPI=10 +CONFIG_IRQ_UART0_RX=10 +CONFIG_IRQ_UART0_TX=10 +CONFIG_IRQ_UART1_RX=10 +CONFIG_IRQ_UART1_TX=10 +CONFIG_IRQ_CAN_RX=11 +CONFIG_IRQ_CAN_TX=11 +CONFIG_IRQ_MAC_RX=11 +CONFIG_IRQ_MAC_TX=11 +CONFIG_IRQ_TMR0=12 +CONFIG_IRQ_TMR1=12 +CONFIG_IRQ_TMR2=12 +CONFIG_IRQ_TMR3=12 +CONFIG_IRQ_TMR4=12 +CONFIG_IRQ_TMR5=12 +CONFIG_IRQ_TMR6=12 +CONFIG_IRQ_TMR7=12 +CONFIG_IRQ_PROG_INTA=12 +CONFIG_IRQ_PORTG_INTB=12 +CONFIG_IRQ_MEM_DMA0=13 +CONFIG_IRQ_MEM_DMA1=13 +CONFIG_IRQ_WATCH=13 + +# +# Board customizations +# +# CONFIG_CMDLINE_BOOL is not set + +# +# Board Setup +# +CONFIG_CLKIN_HZ=25000000 +CONFIG_MEM_SIZE=64 +CONFIG_MEM_ADD_WIDTH=10 +CONFIG_BOOT_LOAD=0x1000 + +# +# Console UART Setup +# +# CONFIG_BAUD_9600 is not set +# CONFIG_BAUD_19200 is not set +# CONFIG_BAUD_38400 is not set +CONFIG_BAUD_57600=y +# CONFIG_BAUD_115200 is not set +CONFIG_BAUD_NO_PARITY=y +# CONFIG_BAUD_PARITY is not set +CONFIG_BAUD_1_STOPBIT=y +# CONFIG_BAUD_2_STOPBIT is not set + +# +# Blackfin Kernel Optimizations +# + +# +# Timer Tick +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 + +# +# Memory Optimizations +# +CONFIG_I_ENTRY_L1=y +CONFIG_EXCPT_IRQ_SYSC_L1=y +CONFIG_DO_IRQ_L1=y +CONFIG_CORE_TIMER_IRQ_L1=y +CONFIG_IDLE_L1=y +CONFIG_SCHEDULE_L1=y +CONFIG_ARITHMETIC_OPS_L1=y +CONFIG_ACCESS_OK_L1=y +CONFIG_MEMSET_L1=y +CONFIG_MEMCPY_L1=y +CONFIG_SYS_BFIN_SPINLOCK_L1=y +# CONFIG_IP_CHECKSUM_L1 is not set +# CONFIG_SYSCALL_TAB_L1 is not set +# CONFIG_CPLB_SWITCH_TAB_L1 is not set +CONFIG_RAMKERNEL=y +# CONFIG_ROMKERNEL is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_LARGE_ALLOCS=y +CONFIG_BFIN_DMA_5XX=y +# CONFIG_DMA_UNCACHED_2M is not set +CONFIG_DMA_UNCACHED_1M=y +# CONFIG_DMA_UNCACHED_NONE is not set + +# +# Cache Support +# +CONFIG_BLKFIN_CACHE=y +CONFIG_BLKFIN_DCACHE=y +# CONFIG_BLKFIN_DCACHE_BANKA is not set +# CONFIG_BLKFIN_CACHE_LOCK is not set +# CONFIG_BLKFIN_WB is not set +CONFIG_BLKFIN_WT=y +CONFIG_L1_MAX_PIECE=16 + +# +# Clock Settings +# +# CONFIG_BFIN_KERNEL_CLOCK is not set + +# +# Asynchonous Memory Configuration +# + +# +# EBIU_AMBCTL Global Control +# +CONFIG_C_AMCKEN=y +CONFIG_C_CDPRIO=y +# CONFIG_C_AMBEN is not set +# CONFIG_C_AMBEN_B0 is not set +# CONFIG_C_AMBEN_B0_B1 is not set +# CONFIG_C_AMBEN_B0_B1_B2 is not set +CONFIG_C_AMBEN_ALL=y + +# +# EBIU_AMBCTL Control +# +CONFIG_BANK_0=0x7BB0 +CONFIG_BANK_1=0x7BB0 +CONFIG_BANK_2=0x7BB0 +CONFIG_BANK_3=0x99B3 + +# +# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# +# CONFIG_PCI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# + +# +# Executable file formats +# +CONFIG_BINFMT_ELF_FDPIC=y +CONFIG_BINFMT_FLAT=y +CONFIG_BINFMT_ZFLAT=y +# CONFIG_BINFMT_SHARED_FLAT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +CONFIG_PM=y +CONFIG_PM_LEGACY=y +# CONFIG_PM_DEBUG is not set +# CONFIG_PM_SYSFS_DEPRECATED is not set +CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR=y +# CONFIG_PM_WAKEUP_BY_GPIO is not set +# CONFIG_PM_WAKEUP_GPIO_API is not set +CONFIG_PM_WAKEUP_SIC_IWR=0x80000000 + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETLABEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +CONFIG_IRDA=m + +# +# IrDA protocols +# +CONFIG_IRLAN=m +CONFIG_IRCOMM=m +# CONFIG_IRDA_ULTRA is not set + +# +# IrDA options +# +CONFIG_IRDA_CACHE_LAST_LSAP=y +# CONFIG_IRDA_FAST_RR is not set +# CONFIG_IRDA_DEBUG is not set + +# +# Infrared-port device drivers +# + +# +# SIR device drivers +# +CONFIG_IRTTY_SIR=m + +# +# Dongle support +# +# CONFIG_DONGLE is not set + +# +# Old SIR device drivers +# +# CONFIG_IRPORT_SIR is not set + +# +# Old Serial dongle support +# + +# +# FIR device drivers +# +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=m +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +CONFIG_MTD_JEDECPROBE=m +CONFIG_MTD_GEN_PROBE=m +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_MW320D=m +CONFIG_MTD_RAM=y +CONFIG_MTD_ROM=m +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_BF5xx=m +CONFIG_BFIN_FLASH_SIZE=0x400000 +CONFIG_EBIU_FLASH_BASE=0x20000000 + +# +# FLASH_EBIU_AMBCTL Control +# +CONFIG_BFIN_FLASH_BANK_0=0x7BB0 +CONFIG_BFIN_FLASH_BANK_1=0x7BB0 +CONFIG_BFIN_FLASH_BANK_2=0x7BB0 +CONFIG_BFIN_FLASH_BANK_3=0x7BB0 +# CONFIG_MTD_UCLINUX is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +CONFIG_MTD_NAND=m +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +CONFIG_MTD_NAND_BFIN=m +CONFIG_BFIN_NAND_BASE=0x20212000 +CONFIG_BFIN_NAND_CLE=2 +CONFIG_BFIN_NAND_ALE=1 +CONFIG_BFIN_NAND_READY=3 +CONFIG_MTD_NAND_IDS=m +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# Misc devices +# +# CONFIG_TIFM_CORE is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_SMC91X is not set +CONFIG_BFIN_MAC=y +CONFIG_BFIN_MAC_USE_L1=y +CONFIG_BFIN_TX_DESC_NUM=10 +CONFIG_BFIN_RX_DESC_NUM=20 +# CONFIG_BFIN_MAC_RMII is not set + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=m +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_UINPUT is not set +# CONFIG_BF53X_PFBUTTONS is not set +CONFIG_TWI_KEYPAD=m +CONFIG_BFIN_TWIKEYPAD_IRQ_PFX=72 + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_AD9960 is not set +# CONFIG_SPI_ADC_BF533 is not set +# CONFIG_BF533_PFLAGS is not set +# CONFIG_BF5xx_PPIFCD is not set +# CONFIG_BF5xx_TIMERS is not set +# CONFIG_BF5xx_PPI is not set +CONFIG_BFIN_SPORT=y +# CONFIG_BFIN_TIMER_LATENCY is not set +CONFIG_TWI_LCD=m +CONFIG_TWI_LCD_SLAVE_ADDR=34 +# CONFIG_AD5304 is not set +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_BFIN=y +CONFIG_SERIAL_BFIN_CONSOLE=y +CONFIG_SERIAL_BFIN_DMA=y +# CONFIG_SERIAL_BFIN_PIO is not set +CONFIG_SERIAL_BFIN_UART0=y +# CONFIG_BFIN_UART0_CTSRTS is not set +# CONFIG_SERIAL_BFIN_UART1 is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_BFIN_SPORT is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# CAN, the car bus and industrial fieldbus +# +CONFIG_CAN4LINUX=y + +# +# linux embedded drivers +# +# CONFIG_CAN_MCF5282 is not set +# CONFIG_CAN_UNCTWINCAN is not set +CONFIG_CAN_BLACKFIN=m + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=y +# CONFIG_GEN_RTC is not set +CONFIG_BLACKFIN_DPMC=y +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +CONFIG_I2C=m +CONFIG_I2C_CHARDEV=m + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_BLACKFIN_GPIO is not set +CONFIG_I2C_BLACKFIN_TWI=m +CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50 +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +CONFIG_SENSORS_AD5252=m +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCF8575 is not set +# CONFIG_SENSORS_PCA9543 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +CONFIG_SPI=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set + +# +# SPI Protocol Masters +# +CONFIG_SPI_BFIN=y + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +CONFIG_FIRMWARE_EDID=y +CONFIG_FB=m +CONFIG_FB_CFB_FILLRECT=m +CONFIG_FB_CFB_COPYAREA=m +CONFIG_FB_CFB_IMAGEBLIT=m +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set +CONFIG_FB_BFIN_7171=m +CONFIG_FB_BFIN_7393=m +CONFIG_NTSC=y +# CONFIG_PAL is not set +# CONFIG_NTSC_640x480 is not set +# CONFIG_PAL_640x480 is not set +# CONFIG_NTSC_YCBCR is not set +# CONFIG_PAL_YCBCR is not set +CONFIG_ADV7393_1XMEM=y +# CONFIG_ADV7393_2XMEM is not set +CONFIG_FB_BF537_LQ035=m +CONFIG_LQ035_SLAVE_ADDR=0x58 +# CONFIG_FB_BFIN_LANDSCAPE is not set +# CONFIG_FB_BFIN_BGR is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Logo configuration +# +# CONFIG_LOGO is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_BACKLIGHT_CLASS_DEVICE=m +CONFIG_BACKLIGHT_DEVICE=y +CONFIG_LCD_CLASS_DEVICE=m +CONFIG_LCD_DEVICE=y + +# +# Sound +# +CONFIG_SOUND=m + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set + +# +# HID Devices +# +CONFIG_HID=y + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_SPI_MMC is not set +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set + +# +# RTC drivers +# +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_TEST is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_V3020 is not set +CONFIG_RTC_DRV_BFIN=y + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# Virtualization +# + +# +# PBX support +# +# CONFIG_PBX is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +# CONFIG_EXT2_FS_POSIX_ACL is not set +# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_YAFFS_FS=m +CONFIG_YAFFS_YAFFS1=y +# CONFIG_YAFFS_DOES_ECC is not set +CONFIG_YAFFS_YAFFS2=y +CONFIG_YAFFS_AUTO_YAFFS2=y +# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set +CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10 +# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set +# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set +CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y +CONFIG_JFFS2_FS=m +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +# CONFIG_SMB_NLS_DEFAULT is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=m +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_SERIAL_EARLY_INIT is not set +CONFIG_DEBUG_HUNT_FOR_ZERO=y +# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set +CONFIG_CPLB_INFO=y +CONFIG_ACCESS_CHECK=y + +# +# Security options +# +# CONFIG_KEYS is not set +CONFIG_SECURITY=y +# CONFIG_SECURITY_NETWORK is not set +CONFIG_SECURITY_CAPABILITIES=y + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m +CONFIG_PLIST=y +CONFIG_IOMAP_COPY=y diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig new file mode 100644 index 00000000000000..e32ca2072cbf79 --- /dev/null +++ b/arch/blackfin/configs/BF561-EZKIT_defconfig @@ -0,0 +1,1073 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.19.3 +# +# CONFIG_MMU is not set +# CONFIG_FPU is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +CONFIG_BLACKFIN=y +CONFIG_BFIN=y +CONFIG_SEMAPHORE_SLEEPERS=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_UCLINUX=y +CONFIG_FORCE_MAX_ZONEORDER=14 +CONFIG_IRQCHIP_DEMUX_GPIO=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +# CONFIG_UID16 is not set +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 +# CONFIG_LIMIT_PAGECACHE is not set +CONFIG_BUDDY=y +# CONFIG_NP2 is not set +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y +CONFIG_TINY_SHMEM=y +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_BLK_DEV_IO_TRACE is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_PREEMPT_NONE is not set +CONFIG_PREEMPT_VOLUNTARY=y +# CONFIG_PREEMPT is not set + +# +# Blackfin Processor Options +# + +# +# Processor and Board Settings +# +# CONFIG_BF531 is not set +# CONFIG_BF532 is not set +# CONFIG_BF533 is not set +# CONFIG_BF534 is not set +# CONFIG_BF535 is not set +# CONFIG_BF536 is not set +# CONFIG_BF537 is not set +CONFIG_BF561=y +# CONFIG_BF_REV_0_2 is not set +CONFIG_BF_REV_0_3=y +# CONFIG_BF_REV_0_4 is not set +# CONFIG_BF_REV_0_5 is not set +CONFIG_BFIN_DUAL_CORE=y +# CONFIG_BFIN533_EZKIT is not set +# CONFIG_BFIN533_STAMP is not set +# CONFIG_BFIN537_STAMP is not set +# CONFIG_BFIN533_BLUETECHNIX_CM is not set +# CONFIG_BFIN537_BLUETECHNIX_CM is not set +# CONFIG_BFIN561_BLUETECHNIX_CM is not set +CONFIG_BFIN561_EZKIT=y +# CONFIG_PNAV10 is not set +# CONFIG_GENERIC_BOARD is not set +CONFIG_MEM_MT48LC16M16A2TG_75=y + +# +# BF561 Specific Configuration +# + +# +# Core B Support +# + +# +# Core B Support +# +CONFIG_BF561_COREB=y +CONFIG_BF561_COREB_RESET=y + +# +# Interrupt Priority Assignment +# + +# +# Priority +# +CONFIG_IRQ_PLL_WAKEUP=7 +CONFIG_IRQ_DMA1_ERROR=7 +CONFIG_IRQ_DMA2_ERROR=7 +CONFIG_IRQ_IMDMA_ERROR=7 +CONFIG_IRQ_PPI0_ERROR=7 +CONFIG_IRQ_PPI1_ERROR=7 +CONFIG_IRQ_SPORT0_ERROR=7 +CONFIG_IRQ_SPORT1_ERROR=7 +CONFIG_IRQ_SPI_ERROR=7 +CONFIG_IRQ_UART_ERROR=7 +CONFIG_IRQ_RESERVED_ERROR=7 +CONFIG_IRQ_DMA1_0=8 +CONFIG_IRQ_DMA1_1=8 +CONFIG_IRQ_DMA1_2=8 +CONFIG_IRQ_DMA1_3=8 +CONFIG_IRQ_DMA1_4=8 +CONFIG_IRQ_DMA1_5=8 +CONFIG_IRQ_DMA1_6=8 +CONFIG_IRQ_DMA1_7=8 +CONFIG_IRQ_DMA1_8=8 +CONFIG_IRQ_DMA1_9=8 +CONFIG_IRQ_DMA1_10=8 +CONFIG_IRQ_DMA1_11=8 +CONFIG_IRQ_DMA2_0=9 +CONFIG_IRQ_DMA2_1=9 +CONFIG_IRQ_DMA2_2=9 +CONFIG_IRQ_DMA2_3=9 +CONFIG_IRQ_DMA2_4=9 +CONFIG_IRQ_DMA2_5=9 +CONFIG_IRQ_DMA2_6=9 +CONFIG_IRQ_DMA2_7=9 +CONFIG_IRQ_DMA2_8=9 +CONFIG_IRQ_DMA2_9=9 +CONFIG_IRQ_DMA2_10=9 +CONFIG_IRQ_DMA2_11=9 +CONFIG_IRQ_TIMER0=10 +CONFIG_IRQ_TIMER1=10 +CONFIG_IRQ_TIMER2=10 +CONFIG_IRQ_TIMER3=10 +CONFIG_IRQ_TIMER4=10 +CONFIG_IRQ_TIMER5=10 +CONFIG_IRQ_TIMER6=10 +CONFIG_IRQ_TIMER7=10 +CONFIG_IRQ_TIMER8=10 +CONFIG_IRQ_TIMER9=10 +CONFIG_IRQ_TIMER10=10 +CONFIG_IRQ_TIMER11=10 +CONFIG_IRQ_PROG0_INTA=11 +CONFIG_IRQ_PROG0_INTB=11 +CONFIG_IRQ_PROG1_INTA=11 +CONFIG_IRQ_PROG1_INTB=11 +CONFIG_IRQ_PROG2_INTA=11 +CONFIG_IRQ_PROG2_INTB=11 +CONFIG_IRQ_DMA1_WRRD0=8 +CONFIG_IRQ_DMA1_WRRD1=8 +CONFIG_IRQ_DMA2_WRRD0=9 +CONFIG_IRQ_DMA2_WRRD1=9 +CONFIG_IRQ_IMDMA_WRRD0=12 +CONFIG_IRQ_IMDMA_WRRD1=12 +CONFIG_IRQ_WDTIMER=13 + +# +# Board customizations +# + +# +# Board Setup +# +CONFIG_CLKIN_HZ=30000000 +CONFIG_MEM_SIZE=64 +CONFIG_MEM_ADD_WIDTH=9 +CONFIG_BOOT_LOAD=0x1000 + +# +# Console UART Setup +# +# CONFIG_BAUD_9600 is not set +# CONFIG_BAUD_19200 is not set +# CONFIG_BAUD_38400 is not set +CONFIG_BAUD_57600=y +# CONFIG_BAUD_115200 is not set +CONFIG_BAUD_NO_PARITY=y +# CONFIG_BAUD_PARITY is not set +CONFIG_BAUD_1_STOPBIT=y +# CONFIG_BAUD_2_STOPBIT is not set + +# +# Blackfin Kernel Optimizations +# + +# +# Timer Tick +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 + +# +# Memory Optimizations +# +CONFIG_I_ENTRY_L1=y +CONFIG_EXCPT_IRQ_SYSC_L1=y +CONFIG_DO_IRQ_L1=y +CONFIG_CORE_TIMER_IRQ_L1=y +CONFIG_IDLE_L1=y +CONFIG_SCHEDULE_L1=y +CONFIG_ARITHMETIC_OPS_L1=y +CONFIG_ACCESS_OK_L1=y +CONFIG_MEMSET_L1=y +CONFIG_MEMCPY_L1=y +CONFIG_SYS_BFIN_SPINLOCK_L1=y +# CONFIG_IP_CHECKSUM_L1 is not set +# CONFIG_SYSCALL_TAB_L1 is not set +# CONFIG_CPLB_SWITCH_TAB_L1 is not set +CONFIG_RAMKERNEL=y +# CONFIG_ROMKERNEL is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_LARGE_ALLOCS=y +CONFIG_BFIN_DMA_5XX=y +# CONFIG_DMA_UNCACHED_2M is not set +CONFIG_DMA_UNCACHED_1M=y +# CONFIG_DMA_UNCACHED_NONE is not set + +# +# Cache Support +# +CONFIG_BLKFIN_CACHE=y +CONFIG_BLKFIN_DCACHE=y +# CONFIG_BLKFIN_DCACHE_BANKA is not set +# CONFIG_BLKFIN_CACHE_LOCK is not set +# CONFIG_BLKFIN_WB is not set +CONFIG_BLKFIN_WT=y +CONFIG_L1_MAX_PIECE=16 + +# +# Clock Settings +# +# CONFIG_BFIN_KERNEL_CLOCK is not set + +# +# Asynchonous Memory Configuration +# + +# +# EBIU_AMBCTL Global Control +# +CONFIG_C_AMCKEN=y +CONFIG_C_CDPRIO=y +CONFIG_C_B0PEN=y +CONFIG_C_B1PEN=y +CONFIG_C_B2PEN=y +# CONFIG_C_B3PEN is not set +# CONFIG_C_AMBEN is not set +# CONFIG_C_AMBEN_B0 is not set +# CONFIG_C_AMBEN_B0_B1 is not set +# CONFIG_C_AMBEN_B0_B1_B2 is not set +CONFIG_C_AMBEN_ALL=y + +# +# EBIU_AMBCTL Control +# +CONFIG_BANK_0=0x7BB0 +CONFIG_BANK_1=0x7BB0 +CONFIG_BANK_2=0x7BB0 +CONFIG_BANK_3=0x99B3 + +# +# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# +# CONFIG_PCI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# + +# +# Executable file formats +# +CONFIG_BINFMT_ELF_FDPIC=y +CONFIG_BINFMT_FLAT=y +CONFIG_BINFMT_ZFLAT=y +# CONFIG_BINFMT_SHARED_FLAT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETLABEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=m +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +CONFIG_MTD_JEDECPROBE=m +CONFIG_MTD_GEN_PROBE=m +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_MW320D=m +CONFIG_MTD_RAM=y +CONFIG_MTD_ROM=m +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_EZKIT561 is not set +CONFIG_MTD_BF5xx=m +CONFIG_BFIN_FLASH_SIZE=0x0400000 +CONFIG_EBIU_FLASH_BASE=0x20000000 + +# +# FLASH_EBIU_AMBCTL Control +# +CONFIG_BFIN_FLASH_BANK_0=0x7BB0 +CONFIG_BFIN_FLASH_BANK_1=0x7BB0 +CONFIG_BFIN_FLASH_BANK_2=0x7BB0 +CONFIG_BFIN_FLASH_BANK_3=0x7BB0 +# CONFIG_MTD_UCLINUX is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# Misc devices +# +# CONFIG_TIFM_CORE is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_SMC91X=y + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_AD9960 is not set +# CONFIG_SPI_ADC_BF533 is not set +# CONFIG_BF533_PFLAGS is not set +# CONFIG_BF5xx_PPIFCD is not set +# CONFIG_BF5xx_TIMERS is not set +# CONFIG_BF5xx_PPI is not set +# CONFIG_BFIN_SPORT is not set +# CONFIG_BFIN_TIMER_LATENCY is not set +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_BFIN=y +CONFIG_SERIAL_BFIN_CONSOLE=y +CONFIG_SERIAL_BFIN_DMA=y +# CONFIG_SERIAL_BFIN_PIO is not set +CONFIG_SERIAL_BFIN_UART0=y +# CONFIG_BFIN_UART0_CTSRTS is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_BFIN_SPORT is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# CAN, the car bus and industrial fieldbus +# +# CONFIG_CAN4LINUX is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=y +# CONFIG_GEN_RTC is not set +# CONFIG_BLACKFIN_DPMC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# PBX support +# +# CONFIG_PBX is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +# CONFIG_EXT2_FS_POSIX_ACL is not set +# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_YAFFS_FS=m +CONFIG_YAFFS_YAFFS1=y +# CONFIG_YAFFS_DOES_ECC is not set +CONFIG_YAFFS_YAFFS2=y +CONFIG_YAFFS_AUTO_YAFFS2=y +# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set +CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10 +# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set +# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set +CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y +# CONFIG_JFFS_FS is not set +CONFIG_JFFS2_FS=m +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +# CONFIG_SMB_NLS_DEFAULT is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=m +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_UNWIND_INFO is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_SERIAL_EARLY_INIT is not set +CONFIG_DEBUG_HUNT_FOR_ZERO=y +# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set +# CONFIG_DUAL_CORE_TEST_MODULE is not set +# CONFIG_BOOTPARAM is not set +# CONFIG_NO_KERNEL_MSG is not set +CONFIG_CPLB_INFO=y +# CONFIG_NO_ACCESS_CHECK is not set + +# +# Security options +# +# CONFIG_KEYS is not set +CONFIG_SECURITY=y +# CONFIG_SECURITY_NETWORK is not set +CONFIG_SECURITY_CAPABILITIES=y + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m +CONFIG_PLIST=y diff --git a/arch/blackfin/configs/PNAV-10_defconfig b/arch/blackfin/configs/PNAV-10_defconfig new file mode 100644 index 00000000000000..97b4ffa2b4ac88 --- /dev/null +++ b/arch/blackfin/configs/PNAV-10_defconfig @@ -0,0 +1,1253 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.19.3 +# +# CONFIG_MMU is not set +# CONFIG_FPU is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +CONFIG_BLACKFIN=y +CONFIG_BFIN=y +CONFIG_SEMAPHORE_SLEEPERS=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_UCLINUX=y +CONFIG_FORCE_MAX_ZONEORDER=14 +CONFIG_IRQCHIP_DEMUX_GPIO=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=9 +# CONFIG_LIMIT_PAGECACHE is not set +CONFIG_BUDDY=y +# CONFIG_NP2 is not set +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y +CONFIG_TINY_SHMEM=y +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_BLK_DEV_IO_TRACE is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_PREEMPT_NONE is not set +CONFIG_PREEMPT_VOLUNTARY=y +# CONFIG_PREEMPT is not set + +# +# Blackfin Processor Options +# + +# +# Processor and Board Settings +# +# CONFIG_BF531 is not set +# CONFIG_BF532 is not set +# CONFIG_BF533 is not set +# CONFIG_BF534 is not set +# CONFIG_BF535 is not set +# CONFIG_BF536 is not set +CONFIG_BF537=y +# CONFIG_BF561 is not set +CONFIG_BF_REV_0_2=y +# CONFIG_BF_REV_0_3 is not set +# CONFIG_BF_REV_0_4 is not set +# CONFIG_BF_REV_0_5 is not set +CONFIG_BFIN_SINGLE_CORE=y +# CONFIG_BFIN533_EZKIT is not set +# CONFIG_BFIN533_STAMP is not set +# CONFIG_BFIN537_STAMP is not set +# CONFIG_BFIN533_BLUETECHNIX_CM is not set +# CONFIG_BFIN537_BLUETECHNIX_CM is not set +# CONFIG_BFIN561_BLUETECHNIX_CM is not set +# CONFIG_BFIN561_EZKIT is not set +CONFIG_PNAV10=y +# CONFIG_GENERIC_BOARD is not set +CONFIG_MEM_MT48LC32M8A2_75=y +CONFIG_IRQ_PLL_WAKEUP=7 + +# +# BF537 Specific Configuration +# + +# +# PORT F/G Selection +# +CONFIG_BF537_PORT_F=y +# CONFIG_BF537_PORT_G is not set +# CONFIG_BF537_PORT_H is not set + +# +# Interrupt Priority Assignment +# + +# +# Priority +# +CONFIG_IRQ_DMA_ERROR=7 +CONFIG_IRQ_ERROR=7 +CONFIG_IRQ_RTC=8 +CONFIG_IRQ_PPI=8 +CONFIG_IRQ_SPORT0_RX=9 +CONFIG_IRQ_SPORT0_TX=9 +CONFIG_IRQ_SPORT1_RX=9 +CONFIG_IRQ_SPORT1_TX=9 +CONFIG_IRQ_TWI=10 +CONFIG_IRQ_SPI=10 +CONFIG_IRQ_UART0_RX=10 +CONFIG_IRQ_UART0_TX=10 +CONFIG_IRQ_UART1_RX=10 +CONFIG_IRQ_UART1_TX=10 +CONFIG_IRQ_CAN_RX=11 +CONFIG_IRQ_CAN_TX=11 +CONFIG_IRQ_MAC_RX=11 +CONFIG_IRQ_MAC_TX=11 +CONFIG_IRQ_TMR0=12 +CONFIG_IRQ_TMR1=12 +CONFIG_IRQ_TMR2=12 +CONFIG_IRQ_TMR3=12 +CONFIG_IRQ_TMR4=12 +CONFIG_IRQ_TMR5=12 +CONFIG_IRQ_TMR6=12 +CONFIG_IRQ_TMR7=12 +CONFIG_IRQ_PROG_INTA=12 +CONFIG_IRQ_PORTG_INTB=12 +CONFIG_IRQ_MEM_DMA0=13 +CONFIG_IRQ_MEM_DMA1=13 +CONFIG_IRQ_WATCH=13 + +# +# Board customizations +# + +# +# Board Setup +# +CONFIG_CLKIN_HZ=24576000 +CONFIG_MEM_SIZE=64 +CONFIG_MEM_ADD_WIDTH=10 +CONFIG_BOOT_LOAD=0x1000 + +# +# Console UART Setup +# +# CONFIG_BAUD_9600 is not set +# CONFIG_BAUD_19200 is not set +# CONFIG_BAUD_38400 is not set +# CONFIG_BAUD_57600 is not set +CONFIG_BAUD_115200=y +CONFIG_BAUD_NO_PARITY=y +# CONFIG_BAUD_PARITY is not set +CONFIG_BAUD_1_STOPBIT=y +# CONFIG_BAUD_2_STOPBIT is not set + +# +# Blackfin Kernel Optimizations +# + +# +# Timer Tick +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 + +# +# Memory Optimizations +# +CONFIG_I_ENTRY_L1=y +CONFIG_EXCPT_IRQ_SYSC_L1=y +CONFIG_DO_IRQ_L1=y +CONFIG_CORE_TIMER_IRQ_L1=y +CONFIG_IDLE_L1=y +CONFIG_SCHEDULE_L1=y +CONFIG_ARITHMETIC_OPS_L1=y +CONFIG_ACCESS_OK_L1=y +CONFIG_MEMSET_L1=y +CONFIG_MEMCPY_L1=y +CONFIG_SYS_BFIN_SPINLOCK_L1=y +CONFIG_IP_CHECKSUM_L1=y +CONFIG_SYSCALL_TAB_L1=y +CONFIG_CPLB_SWITCH_TAB_L1=y +CONFIG_RAMKERNEL=y +# CONFIG_ROMKERNEL is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_LARGE_ALLOCS=y +CONFIG_BFIN_DMA_5XX=y +# CONFIG_DMA_UNCACHED_2M is not set +CONFIG_DMA_UNCACHED_1M=y +# CONFIG_DMA_UNCACHED_NONE is not set + +# +# Cache Support +# +CONFIG_BLKFIN_CACHE=y +CONFIG_BLKFIN_DCACHE=y +# CONFIG_BLKFIN_DCACHE_BANKA is not set +# CONFIG_BLKFIN_CACHE_LOCK is not set +CONFIG_BLKFIN_WB=y +# CONFIG_BLKFIN_WT is not set +CONFIG_L1_MAX_PIECE=16 + +# +# Clock Settings +# +# CONFIG_BFIN_KERNEL_CLOCK is not set + +# +# Asynchonous Memory Configuration +# + +# +# EBIU_AMBCTL Global Control +# +CONFIG_C_AMCKEN=y +CONFIG_C_CDPRIO=y +# CONFIG_C_AMBEN is not set +# CONFIG_C_AMBEN_B0 is not set +# CONFIG_C_AMBEN_B0_B1 is not set +# CONFIG_C_AMBEN_B0_B1_B2 is not set +CONFIG_C_AMBEN_ALL=y + +# +# EBIU_AMBCTL Control +# +CONFIG_BANK_0=0x7BB0 +CONFIG_BANK_1=0x33B0 +CONFIG_BANK_2=0x33B0 +CONFIG_BANK_3=0x99B3 + +# +# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# +# CONFIG_PCI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# + +# +# Executable file formats +# +CONFIG_BINFMT_ELF_FDPIC=y +CONFIG_BINFMT_FLAT=y +CONFIG_BINFMT_ZFLAT=y +# CONFIG_BINFMT_SHARED_FLAT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETLABEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=m +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_RAM=y +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +# CONFIG_MTD_BF5xx is not set +CONFIG_MTD_UCLINUX=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +CONFIG_MTD_NAND_BFIN=y +CONFIG_BFIN_NAND_BASE=0x20100000 +CONFIG_BFIN_NAND_CLE=2 +CONFIG_BFIN_NAND_ALE=1 +CONFIG_BFIN_NAND_READY=44 +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# Misc devices +# +# CONFIG_TIFM_CORE is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_SMC91X is not set +CONFIG_BFIN_MAC=y +# CONFIG_BFIN_MAC_USE_L1 is not set +CONFIG_BFIN_TX_DESC_NUM=100 +CONFIG_BFIN_RX_DESC_NUM=100 +CONFIG_BFIN_MAC_RMII=y + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_TSDEV=y +CONFIG_INPUT_TSDEV_SCREEN_X=240 +CONFIG_INPUT_TSDEV_SCREEN_Y=320 +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_ADS7846 is not set +CONFIG_TOUCHSCREEN_AD7877=y +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +CONFIG_INPUT_MISC=y +CONFIG_INPUT_UINPUT=y +# CONFIG_BF53X_PFBUTTONS is not set +# CONFIG_TWI_KEYPAD is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_AD9960 is not set +# CONFIG_SPI_ADC_BF533 is not set +# CONFIG_BF533_PFLAGS is not set +# CONFIG_BF5xx_PPIFCD is not set +# CONFIG_BF5xx_TIMERS is not set +# CONFIG_BF5xx_PPI is not set +CONFIG_BFIN_SPORT=y +# CONFIG_BFIN_TIMER_LATENCY is not set +CONFIG_TWI_LCD=m +CONFIG_TWI_LCD_SLAVE_ADDR=34 +# CONFIG_AD5304 is not set +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_BFIN=y +CONFIG_SERIAL_BFIN_CONSOLE=y +CONFIG_SERIAL_BFIN_DMA=y +# CONFIG_SERIAL_BFIN_PIO is not set +CONFIG_SERIAL_BFIN_UART0=y +# CONFIG_BFIN_UART0_CTSRTS is not set +CONFIG_SERIAL_BFIN_UART1=y +# CONFIG_BFIN_UART1_CTSRTS is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_BFIN_SPORT is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# CAN, the car bus and industrial fieldbus +# +CONFIG_CAN4LINUX=y + +# +# linux embedded drivers +# +# CONFIG_CAN_MCF5282 is not set +# CONFIG_CAN_UNCTWINCAN is not set +CONFIG_CAN_BLACKFIN=m + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=y +# CONFIG_GEN_RTC is not set +CONFIG_BLACKFIN_DPMC=y +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_BFIN_GPIO is not set +CONFIG_I2C_BFIN_TWI=y +CONFIG_TWICLK_KHZ=50 +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_AD5252 is not set +# CONFIG_SENSORS_EEPROM is not set +CONFIG_SENSORS_PCF8574=m +CONFIG_SENSORS_PCF8575=y +# CONFIG_SENSORS_PCA9543 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +CONFIG_SPI=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +CONFIG_SPI_BFIN=y + +# +# SPI Protocol Masters +# + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +CONFIG_FIRMWARE_EDID=y +CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set +# CONFIG_FB_BFIN_7171 is not set +# CONFIG_FB_BFIN_7393 is not set +CONFIG_FB_BF537_LQ035=y +CONFIG_LQ035_SLAVE_ADDR=0x58 +CONFIG_FB_BFIN_LANDSCAPE=y +# CONFIG_FB_BFIN_BGR is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Logo configuration +# +# CONFIG_LOGO is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_DEVICE=y +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_LCD_DEVICE=y + +# +# Sound +# +CONFIG_SOUND=y + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +# CONFIG_SND_SEQUENCER is not set +# CONFIG_SND_MIXER_OSS is not set +# CONFIG_SND_PCM_OSS is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +# CONFIG_SND_SUPPORT_OLD_API is not set +# CONFIG_SND_VERBOSE_PROCFS is not set +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# ALSA Blackfin devices +# +# CONFIG_SND_BLACKFIN_AD1836 is not set +CONFIG_SND_BLACKFIN_AD1981B=m +# CONFIG_SND_BFIN_AD73311 is not set + +# +# Open Sound System +# +CONFIG_SOUND_PRIME=y +CONFIG_OSS_OBSOLETE_DRIVER=y +# CONFIG_SOUND_MSNDCLAS is not set +# CONFIG_SOUND_MSNDPIN is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_SPI_MMC is not set +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set + +# +# RTC drivers +# +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_TEST is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_V3020 is not set +CONFIG_RTC_DRV_BFIN=y + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# PBX support +# +# CONFIG_PBX is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +# CONFIG_EXT2_FS_POSIX_ACL is not set +# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_YAFFS_FS=y +CONFIG_YAFFS_YAFFS1=y +# CONFIG_YAFFS_DOES_ECC is not set +CONFIG_YAFFS_YAFFS2=y +CONFIG_YAFFS_AUTO_YAFFS2=y +# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set +CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10 +# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set +# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set +CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y +# CONFIG_JFFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +# CONFIG_SMB_NLS_DEFAULT is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=m +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_UNWIND_INFO is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_SERIAL_EARLY_INIT is not set +# CONFIG_DEBUG_HUNT_FOR_ZERO is not set +# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set +# CONFIG_BOOTPARAM is not set +# CONFIG_NO_KERNEL_MSG is not set +# CONFIG_CPLB_INFO is not set +# CONFIG_NO_ACCESS_CHECK is not set + +# +# Security options +# +# CONFIG_KEYS is not set +CONFIG_SECURITY=y +# CONFIG_SECURITY_NETWORK is not set +CONFIG_SECURITY_CAPABILITIES=y + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y diff --git a/arch/blackfin/defconfig b/arch/blackfin/defconfig index d5904ca994cfc2..a513fbe3956767 100644 --- a/arch/blackfin/defconfig +++ b/arch/blackfin/defconfig @@ -1,19 +1,20 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.20 +# Linux kernel version: 2.6.20.4 # # CONFIG_MMU is not set # CONFIG_FPU is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +CONFIG_BLACKFIN=y CONFIG_BFIN=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +# CONFIG_GENERIC_TIME is not set CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_UCLINUX=y CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_IRQCHIP_DEMUX_GPIO=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -55,6 +56,7 @@ CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y +CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 # CONFIG_LIMIT_PAGECACHE is not set CONFIG_BUDDY=y # CONFIG_NP2 is not set @@ -95,6 +97,9 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_PREEMPT_NONE is not set +CONFIG_PREEMPT_VOLUNTARY=y +# CONFIG_PREEMPT is not set # # Blackfin Processor Options @@ -107,7 +112,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_BF532 is not set # CONFIG_BF533 is not set # CONFIG_BF534 is not set -# CONFIG_BF535 is not set # CONFIG_BF536 is not set CONFIG_BF537=y # CONFIG_BF561 is not set @@ -115,7 +119,6 @@ CONFIG_BF_REV_0_2=y # CONFIG_BF_REV_0_3 is not set # CONFIG_BF_REV_0_4 is not set # CONFIG_BF_REV_0_5 is not set -CONFIG_BLACKFIN=y CONFIG_BFIN_SINGLE_CORE=y # CONFIG_BFIN533_EZKIT is not set # CONFIG_BFIN533_STAMP is not set @@ -182,6 +185,7 @@ CONFIG_IRQ_WATCH=13 # # Board customizations # +# CONFIG_CMDLINE_BOOL is not set # # Board Setup @@ -221,6 +225,19 @@ CONFIG_HZ=250 # Memory Optimizations # CONFIG_I_ENTRY_L1=y +CONFIG_EXCPT_IRQ_SYSC_L1=y +CONFIG_DO_IRQ_L1=y +CONFIG_CORE_TIMER_IRQ_L1=y +CONFIG_IDLE_L1=y +CONFIG_SCHEDULE_L1=y +CONFIG_ARITHMETIC_OPS_L1=y +CONFIG_ACCESS_OK_L1=y +CONFIG_MEMSET_L1=y +CONFIG_MEMCPY_L1=y +CONFIG_SYS_BFIN_SPINLOCK_L1=y +# CONFIG_IP_CHECKSUM_L1 is not set +# CONFIG_SYSCALL_TAB_L1 is not set +# CONFIG_CPLB_SWITCH_TAB_L1 is not set CONFIG_RAMKERNEL=y # CONFIG_ROMKERNEL is not set CONFIG_SELECT_MEMORY_MODEL=y @@ -243,6 +260,7 @@ CONFIG_DMA_UNCACHED_1M=y # CONFIG_BLKFIN_CACHE=y CONFIG_BLKFIN_DCACHE=y +# CONFIG_BLKFIN_DCACHE_BANKA is not set # CONFIG_BLKFIN_CACHE_LOCK is not set # CONFIG_BLKFIN_WB is not set CONFIG_BLKFIN_WT=y @@ -815,9 +833,8 @@ CONFIG_I2C_CHARDEV=m # # I2C Hardware Bus support # -# CONFIG_I2C_BFIN_GPIO is not set -CONFIG_I2C_BFIN_TWI=m -CONFIG_TWICLK_KHZ=50 +# CONFIG_I2C_BLACKFIN_GPIO is not set +# CONFIG_I2C_BLACKFIN_TWI is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_STUB is not set @@ -832,6 +849,7 @@ CONFIG_SENSORS_AD5252=m # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8575 is not set +# CONFIG_SENSORS_PCA9543 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set @@ -850,11 +868,11 @@ CONFIG_SPI_MASTER=y # SPI Master Controller Drivers # # CONFIG_SPI_BITBANG is not set -CONFIG_SPI_BFIN=y # # SPI Protocol Masters # +CONFIG_SPI_BFIN=y # # Dallas's 1-wire bus @@ -940,10 +958,6 @@ CONFIG_NTSC=y # CONFIG_PAL_YCBCR is not set CONFIG_ADV7393_1XMEM=y # CONFIG_ADV7393_2XMEM is not set -CONFIG_FB_BF537_LQ035=m -CONFIG_LQ035_SLAVE_ADDR=0x58 -# CONFIG_FB_BFIN_LANDSCAPE is not set -# CONFIG_FB_BFIN_BGR is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set @@ -1280,12 +1294,11 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_SERIAL_EARLY_INIT is not set CONFIG_DEBUG_HUNT_FOR_ZERO=y # CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set -# CONFIG_BOOTPARAM is not set -# CONFIG_NO_KERNEL_MSG is not set CONFIG_CPLB_INFO=y -# CONFIG_NO_ACCESS_CHECK is not set +CONFIG_ACCESS_CHECK=y # # Security options diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c index 8ea079ebecb549..0ccb0dc3f83339 100644 --- a/arch/blackfin/kernel/bfin_dma_5xx.c +++ b/arch/blackfin/kernel/bfin_dma_5xx.c @@ -119,7 +119,7 @@ static void clear_dma_buffer(unsigned int channel) SSYNC(); } -int __init blackfin_dma_init(void) +static int __init blackfin_dma_init(void) { int i; @@ -130,7 +130,9 @@ int __init blackfin_dma_init(void) dma_ch[i].regs = base_addr[i]; mutex_init(&(dma_ch[i].dmalock)); } - + /* Mark MEMDMA Channel 0 as requested since we're using it internally */ + dma_ch[CH_MEM_STREAM0_DEST].chan_status = DMA_CHANNEL_REQUESTED; + dma_ch[CH_MEM_STREAM0_SRC].chan_status = DMA_CHANNEL_REQUESTED; return 0; } @@ -593,14 +595,17 @@ unsigned short get_dma_curr_ycount(unsigned int channel) } EXPORT_SYMBOL(get_dma_curr_ycount); -void *dma_memcpy(void *dest, const void *src, size_t size) +void *_dma_memcpy(void *dest, const void *src, size_t size) { int direction; /* 1 - address decrease, 0 - address increase */ int flag_align; /* 1 - address aligned, 0 - address unaligned */ int flag_2D; /* 1 - 2D DMA needed, 0 - 1D DMA needed */ + unsigned long flags; if (size <= 0) return NULL; + + local_irq_save(flags); if ((unsigned long)src < memory_end) blackfin_dcache_flush_range((unsigned int)src, @@ -725,18 +730,224 @@ void *dma_memcpy(void *dest, const void *src, size_t size) if ((unsigned long)dest < memory_end) blackfin_dcache_invalidate_range((unsigned int)dest, (unsigned int)(dest + size)); + local_irq_restore(flags); return dest; } + +void *dma_memcpy(void *dest, const void *src, size_t size) +{ + size_t bulk; + size_t rest; + void * addr; + + bulk = (size >> 16) << 16; + rest = size - bulk; + if (bulk) + _dma_memcpy(dest, src, bulk); + addr = _dma_memcpy(dest+bulk, src+bulk, rest); + return addr; +} + EXPORT_SYMBOL(dma_memcpy); void *safe_dma_memcpy(void *dest, const void *src, size_t size) { - int flags = 0; void *addr; - local_irq_save(flags); addr = dma_memcpy(dest, src, size); - local_irq_restore(flags); return addr; } EXPORT_SYMBOL(safe_dma_memcpy); + +void dma_outsb(void __iomem *addr, const void *buf, unsigned short len) +{ + + unsigned long flags; + + local_irq_save(flags); + + blackfin_dcache_flush_range((unsigned int)buf,(unsigned int)(buf) + len); + + bfin_write_MDMA_D0_START_ADDR(addr); + bfin_write_MDMA_D0_X_COUNT(len); + bfin_write_MDMA_D0_X_MODIFY(0); + bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); + + bfin_write_MDMA_S0_START_ADDR(buf); + bfin_write_MDMA_S0_X_COUNT(len); + bfin_write_MDMA_S0_X_MODIFY(1); + bfin_write_MDMA_S0_IRQ_STATUS(DMA_DONE | DMA_ERR); + + bfin_write_MDMA_S0_CONFIG(DMAEN | WDSIZE_8); + bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | WDSIZE_8); + + while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)); + + bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); + + bfin_write_MDMA_S0_CONFIG(0); + bfin_write_MDMA_D0_CONFIG(0); + local_irq_restore(flags); + +} +EXPORT_SYMBOL(dma_outsb); + + +void dma_insb(const void __iomem *addr, void *buf, unsigned short len) +{ + unsigned long flags; + + local_irq_save(flags); + bfin_write_MDMA_D0_START_ADDR(buf); + bfin_write_MDMA_D0_X_COUNT(len); + bfin_write_MDMA_D0_X_MODIFY(1); + bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); + + bfin_write_MDMA_S0_START_ADDR(addr); + bfin_write_MDMA_S0_X_COUNT(len); + bfin_write_MDMA_S0_X_MODIFY(0); + bfin_write_MDMA_S0_IRQ_STATUS(DMA_DONE | DMA_ERR); + + bfin_write_MDMA_S0_CONFIG(DMAEN | WDSIZE_8); + bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | WDSIZE_8); + + blackfin_dcache_invalidate_range((unsigned int)buf, (unsigned int)(buf) + len); + + while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)); + + bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); + + bfin_write_MDMA_S0_CONFIG(0); + bfin_write_MDMA_D0_CONFIG(0); + local_irq_restore(flags); + +} +EXPORT_SYMBOL(dma_insb); + +void dma_outsw(void __iomem *addr, const void *buf, unsigned short len) +{ + unsigned long flags; + + local_irq_save(flags); + + blackfin_dcache_flush_range((unsigned int)buf,(unsigned int)(buf) + len); + + bfin_write_MDMA_D0_START_ADDR(addr); + bfin_write_MDMA_D0_X_COUNT(len); + bfin_write_MDMA_D0_X_MODIFY(0); + bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); + + bfin_write_MDMA_S0_START_ADDR(buf); + bfin_write_MDMA_S0_X_COUNT(len); + bfin_write_MDMA_S0_X_MODIFY(2); + bfin_write_MDMA_S0_IRQ_STATUS(DMA_DONE | DMA_ERR); + + bfin_write_MDMA_S0_CONFIG(DMAEN | WDSIZE_16); + bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | WDSIZE_16); + + while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)); + + bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); + + bfin_write_MDMA_S0_CONFIG(0); + bfin_write_MDMA_D0_CONFIG(0); + local_irq_restore(flags); + +} +EXPORT_SYMBOL(dma_outsw); + +void dma_insw(const void __iomem *addr, void *buf, unsigned short len) +{ + unsigned long flags; + + local_irq_save(flags); + + bfin_write_MDMA_D0_START_ADDR(buf); + bfin_write_MDMA_D0_X_COUNT(len); + bfin_write_MDMA_D0_X_MODIFY(2); + bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); + + bfin_write_MDMA_S0_START_ADDR(addr); + bfin_write_MDMA_S0_X_COUNT(len); + bfin_write_MDMA_S0_X_MODIFY(0); + bfin_write_MDMA_S0_IRQ_STATUS(DMA_DONE | DMA_ERR); + + bfin_write_MDMA_S0_CONFIG(DMAEN | WDSIZE_16); + bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | WDSIZE_16); + + blackfin_dcache_invalidate_range((unsigned int)buf, (unsigned int)(buf) + len); + + while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)); + + bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); + + bfin_write_MDMA_S0_CONFIG(0); + bfin_write_MDMA_D0_CONFIG(0); + local_irq_restore(flags); + +} +EXPORT_SYMBOL(dma_insw); + +void dma_outsl(void __iomem *addr, const void *buf, unsigned short len) +{ + unsigned long flags; + + local_irq_save(flags); + + blackfin_dcache_flush_range((unsigned int)buf,(unsigned int)(buf) + len); + + bfin_write_MDMA_D0_START_ADDR(addr); + bfin_write_MDMA_D0_X_COUNT(len); + bfin_write_MDMA_D0_X_MODIFY(0); + bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); + + bfin_write_MDMA_S0_START_ADDR(buf); + bfin_write_MDMA_S0_X_COUNT(len); + bfin_write_MDMA_S0_X_MODIFY(4); + bfin_write_MDMA_S0_IRQ_STATUS(DMA_DONE | DMA_ERR); + + bfin_write_MDMA_S0_CONFIG(DMAEN | WDSIZE_32); + bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | WDSIZE_32); + + while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)); + + bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); + + bfin_write_MDMA_S0_CONFIG(0); + bfin_write_MDMA_D0_CONFIG(0); + local_irq_restore(flags); + +} +EXPORT_SYMBOL(dma_outsl); + +void dma_insl(const void __iomem *addr, void *buf, unsigned short len) +{ + unsigned long flags; + + local_irq_save(flags); + + bfin_write_MDMA_D0_START_ADDR(buf); + bfin_write_MDMA_D0_X_COUNT(len); + bfin_write_MDMA_D0_X_MODIFY(4); + bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); + + bfin_write_MDMA_S0_START_ADDR(addr); + bfin_write_MDMA_S0_X_COUNT(len); + bfin_write_MDMA_S0_X_MODIFY(0); + bfin_write_MDMA_S0_IRQ_STATUS(DMA_DONE | DMA_ERR); + + bfin_write_MDMA_S0_CONFIG(DMAEN | WDSIZE_32); + bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | WDSIZE_32); + + blackfin_dcache_invalidate_range((unsigned int)buf, (unsigned int)(buf) + len); + + while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)); + + bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); + + bfin_write_MDMA_S0_CONFIG(0); + bfin_write_MDMA_D0_CONFIG(0); + local_irq_restore(flags); + +} +EXPORT_SYMBOL(dma_insl); diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c index e9f24a9a46ba4d..3f49fae1cb1f68 100644 --- a/arch/blackfin/kernel/bfin_gpio.c +++ b/arch/blackfin/kernel/bfin_gpio.c @@ -144,7 +144,7 @@ inline int check_gpio(unsigned short gpio) } #ifdef BF537_FAMILY -void port_setup(unsigned short gpio, unsigned short usage) +static void port_setup(unsigned short gpio, unsigned short usage) { if (usage == GPIO_USAGE) { if (*port_fer[gpio_bank(gpio)] & gpio_bit(gpio)) @@ -160,7 +160,7 @@ void port_setup(unsigned short gpio, unsigned short usage) #endif -void default_gpio(unsigned short gpio) +static void default_gpio(unsigned short gpio) { unsigned short bank,bitmask; @@ -177,8 +177,7 @@ void default_gpio(unsigned short gpio) gpio_bankb[bank]->edge &= ~bitmask; } - -int __init bfin_gpio_init(void) +static int __init bfin_gpio_init(void) { int i; @@ -189,9 +188,9 @@ int __init bfin_gpio_init(void) #if defined(BF537_FAMILY) && (defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)) # if defined(CONFIG_BFIN_MAC_RMII) - reserved_map[PORT_H] = 0xC373; + reserved_map[gpio_bank(PORT_H)] = 0xC373; # else - reserved_map[PORT_H] = 0xFFFF; + reserved_map[gpio_bank(PORT_H)] = 0xFFFF; # endif #endif diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index 342bb8dd56ac3b..02dc74301920ea 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -33,7 +33,6 @@ #include <linux/seq_file.h> #include <linux/cpu.h> #include <linux/module.h> -#include <linux/console.h> #include <linux/tty.h> #include <linux/ext2_fs.h> @@ -44,6 +43,8 @@ #include <asm/blackfin.h> #include <asm/cplbinit.h> +u16 _bfin_swrst; + unsigned long memory_start, memory_end, physical_mem_end; unsigned long reserved_mem_dcache_on; unsigned long reserved_mem_icache_on; @@ -175,6 +176,9 @@ void __init setup_arch(char **cmdline_p) unsigned long mtd_phys = 0; #endif +#ifdef CONFIG_DUMMY_CONSOLE + conswitchp = &dummy_con; +#endif cclk = get_cclk(); sclk = get_sclk(); @@ -379,37 +383,27 @@ void __init setup_arch(char **cmdline_p) if (l1_length > L1_DATA_A_LENGTH) panic("L1 memory overflow\n"); - bf53x_cache_init(); - -#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) -# if defined(CONFIG_BFIN_SHARED_FLASH_ENET) && defined(CONFIG_BFIN533_STAMP) - /* setup BF533_STAMP CPLD to route AMS3 to Ethernet MAC */ - bfin_write_FIO_DIR(bfin_read_FIO_DIR() | (1 << CONFIG_ENET_FLASH_PIN)); - bfin_write_FIO_FLAG_S(1 << CONFIG_ENET_FLASH_PIN); - SSYNC(); -# endif -# if defined (CONFIG_BFIN561_EZKIT) - bfin_write_FIO0_DIR(bfin_read_FIO0_DIR() | (1 << 12)); - SSYNC(); -# endif /* defined (CONFIG_BFIN561_EZKIT) */ +#ifdef BF561_FAMILY + _bfin_swrst = bfin_read_SICA_SWRST(); +#else + _bfin_swrst = bfin_read_SWRST(); #endif + bf53x_cache_init(); + printk(KERN_INFO "Hardware Trace Enabled\n"); bfin_write_TBUFCTL(0x03); } -#if defined(CONFIG_BF561) -static struct cpu cpu[2]; -#else -static struct cpu cpu[1]; -#endif static int __init topology_init(void) { #if defined (CONFIG_BF561) + static struct cpu cpu[2]; register_cpu(&cpu[0], 0); register_cpu(&cpu[1], 1); return 0; #else + static struct cpu cpu[1]; return register_cpu(cpu, 0); #endif } diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index 9556b73de80854..9932edee8cb48c 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -59,9 +59,10 @@ static int printk_address(unsigned long address) struct vm_list_struct *vml; struct task_struct *p; struct mm_struct *mm; + unsigned long offset; #ifdef CONFIG_KALLSYMS - unsigned long offset = 0, symsize; + unsigned long symsize; const char *symname; char *modname; char *delim = ":"; @@ -106,12 +107,19 @@ static int printk_address(unsigned long address) sizeof(_tmpbuf)); } + /* FLAT does not have its text aligned to the start of + * the map while FDPIC ELF does ... + */ + if (current->mm && + (address > current->mm->start_code) && + (address < current->mm->end_code)) + offset = address - current->mm->start_code; + else + offset = (address - vma->vm_start) + (vma->vm_pgoff << PAGE_SHIFT); + write_unlock_irq(&tasklist_lock); return printk("<0x%p> [ %s + 0x%lx ]", - (void*)address, name, - (unsigned long) - ((address - vma->vm_start) + - (vma->vm_pgoff << PAGE_SHIFT))); + (void*)address, name, offset); } vml = vml->next; diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S index 6ae9ebbd8e589b..86fe67995802e0 100644 --- a/arch/blackfin/kernel/vmlinux.lds.S +++ b/arch/blackfin/kernel/vmlinux.lds.S @@ -54,7 +54,7 @@ SECTIONS { _text = .; __stext = .; - *(.text) + TEXT_TEXT SCHED_TEXT *(.text.lock) . = ALIGN(16); @@ -200,7 +200,7 @@ SECTIONS __sdata = .; . = ALIGN(0x2000); *(.data.init_task) - *(.data) + DATA_DATA . = ALIGN(32); *(.data.cacheline_aligned) diff --git a/arch/blackfin/lib/ins.S b/arch/blackfin/lib/ins.S index 730d2b427538c3..7d5e9846311d71 100644 --- a/arch/blackfin/lib/ins.S +++ b/arch/blackfin/lib/ins.S @@ -29,6 +29,7 @@ */ #include <linux/linkage.h> +#include <asm/blackfin.h> .align 2 @@ -39,11 +40,14 @@ ENTRY(_insl) P2 = R2; /* P2 = count */ SSYNC; LSETUP( .Llong_loop_s, .Llong_loop_e) LC0 = P2; -.Llong_loop_s: R0 = [P0]; -.Llong_loop_e: [P1++] = R0; +.Llong_loop_s: R0 = [P0]; + [P1++] = R0; + NOP; +.Llong_loop_e: NOP; sti R3; RTS; + ENTRY(_insw) P0 = R0; /* P0 = port */ cli R3; @@ -51,8 +55,10 @@ ENTRY(_insw) P2 = R2; /* P2 = count */ SSYNC; LSETUP( .Lword_loop_s, .Lword_loop_e) LC0 = P2; -.Lword_loop_s: R0 = W[P0]; -.Lword_loop_e: W[P1++] = R0; +.Lword_loop_s: R0 = W[P0]; + W[P1++] = R0; + NOP; +.Lword_loop_e: NOP; sti R3; RTS; @@ -63,7 +69,9 @@ ENTRY(_insb) P2 = R2; /* P2 = count */ SSYNC; LSETUP( .Lbyte_loop_s, .Lbyte_loop_e) LC0 = P2; -.Lbyte_loop_s: R0 = B[P0]; -.Lbyte_loop_e: B[P1++] = R0; +.Lbyte_loop_s: R0 = B[P0]; + B[P1++] = R0; + NOP; +.Lbyte_loop_e: NOP; sti R3; RTS; diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c index d7b3a5d74e8ccd..9a472fe15833ea 100644 --- a/arch/blackfin/mach-bf533/boards/stamp.c +++ b/arch/blackfin/mach-bf533/boards/stamp.c @@ -164,6 +164,13 @@ static struct bfin5xx_spi_chip ad5304_chip_info = { }; #endif +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) +static struct bfin5xx_spi_chip spi_mmc_chip_info = { + .enable_dma = 1, + .bits_per_word = 8, +}; +#endif + static struct spi_board_info bfin_spi_board_info[] __initdata = { #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) { @@ -199,6 +206,27 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) + { + .modalias = "spi_mmc_dummy", + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 1, + .chip_select = 0, + .platform_data = NULL, + .controller_data = &spi_mmc_chip_info, + .mode = SPI_MODE_3, + }, + { + .modalias = "spi_mmc", + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 1, + .chip_select = CONFIG_SPI_MMC_CS_CHAN, + .platform_data = NULL, + .controller_data = &spi_mmc_chip_info, + .mode = SPI_MODE_3, + }, +#endif + #if defined(CONFIG_PBX) { .modalias = "fxs-spi", @@ -310,12 +338,25 @@ static struct platform_device *stamp_devices[] __initdata = { static int __init stamp_init(void) { + int ret; + printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); - platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); + ret = platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); + if (ret < 0) + return ret; + +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +# if defined(CONFIG_BFIN_SHARED_FLASH_ENET) + /* setup BF533_STAMP CPLD to route AMS3 to Ethernet MAC */ + bfin_write_FIO_DIR(bfin_read_FIO_DIR() | (1 << CONFIG_ENET_FLASH_PIN)); + bfin_write_FIO_FLAG_S(1 << CONFIG_ENET_FLASH_PIN); + SSYNC(); +# endif +#endif + #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) - spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); + return spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #endif - return 0; } arch_initcall(stamp_init); diff --git a/arch/blackfin/mach-bf533/head.S b/arch/blackfin/mach-bf533/head.S index 4808edb0680f87..4db9e624090642 100644 --- a/arch/blackfin/mach-bf533/head.S +++ b/arch/blackfin/mach-bf533/head.S @@ -173,7 +173,8 @@ ENTRY(__stext) STI R2; #endif - /* Initialise UART */ + /* Initialise UART - when booting from u-boot, the UART is not disabled + * so if we dont initalize here, our serial console gets hosed */ p0.h = hi(UART_LCR); p0.l = lo(UART_LCR); r0 = 0x0(Z); @@ -468,12 +469,6 @@ ENTRY(_bfin_reset) w[p0] = r0.l; #endif - /* Clear the bits 13-15 in SWRST if they werent cleared */ - p0.h = hi(SWRST); - p0.l = lo(SWRST); - csync; - r0.l = w[p0]; - /* Clear the IMASK register */ p0.h = hi(IMASK); p0.l = lo(IMASK); @@ -487,66 +482,30 @@ ENTRY(_bfin_reset) [p0] = r0; SSYNC; - /* Disable the WDOG TIMER */ - p0.h = hi(WDOG_CTL); - p0.l = lo(WDOG_CTL); - r0.l = 0xAD6; - w[p0] = r0.l; - SSYNC; - - /* Clear the sticky bit incase it is already set */ - p0.h = hi(WDOG_CTL); - p0.l = lo(WDOG_CTL); - r0.l = 0x8AD6; - w[p0] = r0.l; - SSYNC; - - /* Program the count value */ - R0.l = 0x100; - R0.h = 0x0; - P0.h = hi(WDOG_CNT); - P0.l = lo(WDOG_CNT); - [P0] = R0; + /* make sure SYSCR is set to use BMODE */ + P0.h = hi(SYSCR); + P0.l = lo(SYSCR); + R0.l = 0x0; + W[P0] = R0.l; SSYNC; - /* Program WDOG_STAT if necessary */ - P0.h = hi(WDOG_CTL); - P0.l = lo(WDOG_CTL); - R0 = W[P0](Z); - CC = BITTST(R0,1); - if !CC JUMP .LWRITESTAT; - CC = BITTST(R0,2); - if !CC JUMP .LWRITESTAT; - JUMP .LSKIP_WRITE; - -.LWRITESTAT: - /* When watch dog timer is enabled, a write to STAT will load the contents of CNT to STAT */ - R0 = 0x0000(z); - P0.h = hi(WDOG_STAT); - P0.l = lo(WDOG_STAT) - [P0] = R0; + /* issue a system soft reset */ + P1.h = hi(SWRST); + P1.l = lo(SWRST); + R1.l = 0x0007; + W[P1] = R1; SSYNC; -.LSKIP_WRITE: - /* Enable the reset event */ - P0.h = hi(WDOG_CTL); - P0.l = lo(WDOG_CTL); - R0 = W[P0](Z); - BITCLR(R0,1); - BITCLR(R0,2); - W[P0] = R0.L; - SSYNC; - NOP; - - /* Enable the wdog counter */ - R0 = W[P0](Z); - BITCLR(R0,4); - W[P0] = R0.L; + /* clear system soft reset */ + R0.l = 0x0000; + W[P0] = R0; SSYNC; - IDLE; + /* issue core reset */ + raise 1; RTS; +ENDPROC(_bfin_reset) #if CONFIG_DEBUG_KERNEL_START debug_kernel_start_trap: diff --git a/arch/blackfin/mach-bf537/cpu.c b/arch/blackfin/mach-bf537/cpu.c index 2d83b7e354697c..0442c4c7f72349 100644 --- a/arch/blackfin/mach-bf537/cpu.c +++ b/arch/blackfin/mach-bf537/cpu.c @@ -43,13 +43,13 @@ #define VCO1 (CONFIG_CLKIN_HZ*9) /*99532800 */ #define VCO(x) VCO##x -#define FREQ(x) {VCO(x),VCO(x)/4},{VCO(x),VCO(x)/2},{VCO(x),VCO(x)} +#define MFREQ(x) {VCO(x),VCO(x)/4},{VCO(x),VCO(x)/2},{VCO(x),VCO(x)} /* frequency */ static struct cpufreq_frequency_table bf537_freq_table[] = { - FREQ(1), - FREQ(3), + MFREQ(1), + MFREQ(3), {VCO4, VCO4 / 2}, {VCO4, VCO4}, - FREQ(5), + MFREQ(5), {0, CPUFREQ_TABLE_END}, }; @@ -59,13 +59,14 @@ static struct cpufreq_frequency_table bf537_freq_table[] = { */ static int bf537_getfreq(unsigned int cpu) { - unsigned long cclk_mhz, vco_mhz; + unsigned long cclk_mhz; /* The driver only support single cpu */ if (cpu == 0) dpmc_fops.ioctl(NULL, NULL, IOCTL_GET_CORECLOCK, &cclk_mhz); else cclk_mhz = -1; + return cclk_mhz; } @@ -75,13 +76,12 @@ static int bf537_target(struct cpufreq_policy *policy, unsigned long cclk_mhz; unsigned long vco_mhz; unsigned long flags; - unsigned int index, vco_index; - int i; - + unsigned int index; struct cpufreq_freqs freqs; - if (cpufreq_frequency_table_target - (policy, bf537_freq_table, target_freq, relation, &index)) + + if (cpufreq_frequency_table_target(policy, bf537_freq_table, target_freq, relation, &index)) return -EINVAL; + cclk_mhz = bf537_freq_table[index].frequency; vco_mhz = bf537_freq_table[index].index; @@ -114,8 +114,6 @@ static int bf537_verify_speed(struct cpufreq_policy *policy) static int __init __bf537_cpu_init(struct cpufreq_policy *policy) { - int result; - if (policy->cpu != 0) return -EINVAL; diff --git a/arch/blackfin/mach-bf537/head.S b/arch/blackfin/mach-bf537/head.S index d104e1d8e07a38..2c2652bee7e51a 100644 --- a/arch/blackfin/mach-bf537/head.S +++ b/arch/blackfin/mach-bf537/head.S @@ -181,7 +181,8 @@ ENTRY(__stext) SSYNC; #endif - /*Initialise UART*/ + /* Initialise UART - when booting from u-boot, the UART is not disabled + * so if we dont initalize here, our serial console gets hosed */ p0.h = hi(UART_LCR); p0.l = lo(UART_LCR); r0 = 0x0(Z); @@ -469,47 +470,41 @@ ENTRY(_bfin_reset) SSYNC; #if defined(CONFIG_MTD_M25P80) -/* - * The following code fix the SPI flash reboot issue, - * /CS signal of the chip which is using PF10 return to GPIO mode - */ + /* + * The following code fix the SPI flash reboot issue, + * /CS signal of the chip which is using PF10 return to GPIO mode + */ p0.h = hi(PORTF_FER); p0.l = lo(PORTF_FER); r0.l = 0x0000; w[p0] = r0.l; SSYNC; -/* /CS return to high */ + /* /CS return to high */ p0.h = hi(PORTFIO); p0.l = lo(PORTFIO); r0.l = 0xFFFF; w[p0] = r0.l; SSYNC; -/* Delay some time, This is necessary */ + /* Delay some time, This is necessary */ r1.h = 0; r1.l = 0x400; p1 = r1; - lsetup (_delay_lab1,_delay_lab1_end ) lc1 = p1; -_delay_lab1: + lsetup (.L_delay_lab1, .L_delay_lab1_end) lc1 = p1; +.L_delay_lab1: r0.h = 0; r0.l = 0x8000; p0 = r0; - lsetup (_delay_lab0,_delay_lab0_end ) lc0 = p0; -_delay_lab0: + lsetup (.L_delay_lab0, .L_delay_lab0_end) lc0 = p0; +.L_delay_lab0: nop; -_delay_lab0_end: +.L_delay_lab0_end: nop; -_delay_lab1_end: +.L_delay_lab1_end: nop; #endif - /* Clear the bits 13-15 in SWRST if they werent cleared */ - p0.h = hi(SWRST); - p0.l = lo(SWRST); - csync; - r0.l = w[p0]; - /* Clear the IMASK register */ p0.h = hi(IMASK); p0.l = lo(IMASK); @@ -523,68 +518,30 @@ _delay_lab1_end: [p0] = r0; SSYNC; - /* Disable the WDOG TIMER */ - p0.h = hi(WDOG_CTL); - p0.l = lo(WDOG_CTL); - r0.l = 0xAD6; - w[p0] = r0.l; - SSYNC; - - /* Clear the sticky bit incase it is already set */ - p0.h = hi(WDOG_CTL); - p0.l = lo(WDOG_CTL); - r0.l = 0x8AD6; - w[p0] = r0.l; - SSYNC; - - /* Program the count value */ - R0.l = 0x100; - R0.h = 0x0; - P0.h = hi(WDOG_CNT); - P0.l = lo(WDOG_CNT); - [P0] = R0; - SSYNC; - - /* Program WDOG_STAT if necessary */ - P0.h = hi(WDOG_CTL); - P0.l = lo(WDOG_CTL); - R0 = W[P0](Z); - CC = BITTST(R0,1); - if !CC JUMP .LWRITESTAT; - CC = BITTST(R0,2); - if !CC JUMP .LWRITESTAT; - JUMP .LSKIP_WRITE; - -.LWRITESTAT: - /* When watch dog timer is enabled, - * a write to STAT will load the contents of CNT to STAT - */ - R0 = 0x0000(z); - P0.h = hi(WDOG_STAT); - P0.l = lo(WDOG_STAT) - [P0] = R0; + /* make sure SYSCR is set to use BMODE */ + P0.h = hi(SYSCR); + P0.l = lo(SYSCR); + R0.l = 0x0; + W[P0] = R0.l; SSYNC; -.LSKIP_WRITE: - /* Enable the reset event */ - P0.h = hi(WDOG_CTL); - P0.l = lo(WDOG_CTL); - R0 = W[P0](Z); - BITCLR(R0,1); - BITCLR(R0,2); - W[P0] = R0.L; + /* issue a system soft reset */ + P1.h = hi(SWRST); + P1.l = lo(SWRST); + R1.l = 0x0007; + W[P1] = R1; SSYNC; - NOP; - /* Enable the wdog counter */ - R0 = W[P0](Z); - BITCLR(R0,4); - W[P0] = R0.L; + /* clear system soft reset */ + R0.l = 0x0000; + W[P0] = R0; SSYNC; - IDLE; + /* issue core reset */ + raise 1; RTS; +ENDPROC(_bfin_reset) .data diff --git a/arch/blackfin/mach-bf561/boards/Makefile b/arch/blackfin/mach-bf561/boards/Makefile index 886edc739ab44f..495a1cf9d4529d 100644 --- a/arch/blackfin/mach-bf561/boards/Makefile +++ b/arch/blackfin/mach-bf561/boards/Makefile @@ -3,5 +3,6 @@ # obj-$(CONFIG_GENERIC_BOARD) += generic_board.o -obj-$(CONFIG_BFIN561_EZKIT) += ezkit.o obj-$(CONFIG_BFIN561_BLUETECHNIX_CM) += cm_bf561.o +obj-$(CONFIG_BFIN561_EZKIT) += ezkit.o +obj-$(CONFIG_BFIN561_TEPLA) += tepla.o diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c index 14eb4f9a68ea71..9720b5c307ab58 100644 --- a/arch/blackfin/mach-bf561/boards/ezkit.c +++ b/arch/blackfin/mach-bf561/boards/ezkit.c @@ -32,12 +32,61 @@ #include <linux/spi/spi.h> #include <asm/irq.h> #include <asm/bfin5xx_spi.h> +#include <linux/interrupt.h> +#include <linux/irq.h> /* * Name the Board for the /proc/cpuinfo */ char *bfin_board_name = "ADDS-BF561-EZKIT"; +#define ISP1761_BASE 0x2C0F0000 +#define ISP1761_IRQ IRQ_PF10 + +#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) +static struct resource bfin_isp1761_resources[] = { + [0] = { + .name = "isp1761-regs", + .start = ISP1761_BASE + 0x00000000, + .end = ISP1761_BASE + 0x000fffff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = ISP1761_IRQ, + .end = ISP1761_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_isp1761_device = { + .name = "isp1761", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_isp1761_resources), + .resource = bfin_isp1761_resources, +}; + +static struct platform_device *bfin_isp1761_devices[] = { + &bfin_isp1761_device, +}; + +int __init bfin_isp1761_init(void) +{ + unsigned int num_devices=ARRAY_SIZE(bfin_isp1761_devices); + + printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + set_irq_type(ISP1761_IRQ, IRQF_TRIGGER_FALLING); + + return platform_add_devices(bfin_isp1761_devices, num_devices); +} + +void __exit bfin_isp1761_exit(void) +{ + platform_device_unregister(&bfin_isp1761_device); +} + +arch_initcall(bfin_isp1761_init); +#endif + /* * USB-LAN EzExtender board * Driver needs to know address, irq and flag pin. @@ -135,13 +184,18 @@ static int __init ezkit_init(void) { int ret; - printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); - ret = platform_add_devices(ezkit_devices, - ARRAY_SIZE(ezkit_devices)); + printk(KERN_INFO "%s(): registering device resources\n", __func__); + + ret = platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices)); if (ret < 0) return ret; - return spi_register_board_info(bfin_spi_board_info, - ARRAY_SIZE(bfin_spi_board_info)); + +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) + bfin_write_FIO0_DIR(bfin_read_FIO0_DIR() | (1 << 12)); + SSYNC(); +#endif + + return spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); } arch_initcall(ezkit_init); diff --git a/arch/blackfin/mach-bf561/boards/tepla.c b/arch/blackfin/mach-bf561/boards/tepla.c new file mode 100644 index 00000000000000..db308c7ccabbf4 --- /dev/null +++ b/arch/blackfin/mach-bf561/boards/tepla.c @@ -0,0 +1,61 @@ +/* + * File: arch/blackfin/mach-bf561/tepla.c + * + * Copyright 2004-2007 Analog Devices Inc. + * Only SMSC91C1111 was registered, may do more later. + * + * Copyright 2005 National ICT Australia (NICTA), Aidan Williams <aidan@nicta.com.au> + * Thanks to Jamey Hicks. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/device.h> +#include <linux/platform_device.h> +#include <asm/irq.h> + +char *bfin_board_name = "Tepla-BF561"; + +/* + * Driver needs to know address, irq and flag pin. + */ +static struct resource smc91x_resources[] = { + { + .start = 0x2C000300, + .end = 0x2C000320, + .flags = IORESOURCE_MEM, + },{ + .start = IRQ_PROG_INTB, + .end = IRQ_PROG_INTB, + .flags = IORESOURCE_IRQ|IORESOURCE_IRQ_HIGHLEVEL, + },{ + /* + * denotes the flag pin and is used directly if + * CONFIG_IRQCHIP_DEMUX_GPIO is defined. + */ + .start = IRQ_PF7, + .end = IRQ_PF7, + .flags = IORESOURCE_IRQ|IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; + +static struct platform_device *tepla_devices[] __initdata = { + &smc91x_device, +}; + +static int __init tepla_init(void) +{ + printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + return platform_add_devices(tepla_devices, ARRAY_SIZE(tepla_devices)); +} + +arch_initcall(tepla_init); diff --git a/arch/blackfin/mach-bf561/head.S b/arch/blackfin/mach-bf561/head.S index 7bca478526b9f0..ad9187a866a5ac 100644 --- a/arch/blackfin/mach-bf561/head.S +++ b/arch/blackfin/mach-bf561/head.S @@ -127,7 +127,8 @@ ENTRY(__stext) STI R2; #endif - /* Initialise UART*/ + /* Initialise UART - when booting from u-boot, the UART is not disabled + * so if we dont initalize here, our serial console gets hosed */ p0.h = hi(UART_LCR); p0.l = lo(UART_LCR); r0 = 0x0(Z); @@ -414,12 +415,6 @@ ENTRY(_bfin_reset) w[p0] = r0.l; #endif - /* Clear the bits 13-15 in SWRST if they werent cleared */ - p0.h = hi(SICA_SWRST); - p0.l = lo(SICA_SWRST); - csync; - r0.l = w[p0]; - /* Clear the IMASK register */ p0.h = hi(IMASK); p0.l = lo(IMASK); @@ -433,68 +428,30 @@ ENTRY(_bfin_reset) [p0] = r0; SSYNC; - /* Disable the WDOG TIMER */ - p0.h = hi(WDOGA_CTL); - p0.l = lo(WDOGA_CTL); - r0.l = 0xAD6; - w[p0] = r0.l; - SSYNC; - - /* Clear the sticky bit incase it is already set */ - p0.h = hi(WDOGA_CTL); - p0.l = lo(WDOGA_CTL); - r0.l = 0x8AD6; - w[p0] = r0.l; + /* make sure SYSCR is set to use BMODE */ + P0.h = hi(SICA_SYSCR); + P0.l = lo(SICA_SYSCR); + R0.l = 0x20; + W[P0] = R0.l; SSYNC; - /* Program the count value */ - R0.l = 0x100; - R0.h = 0x0; - P0.h = hi(WDOGA_CNT); - P0.l = lo(WDOGA_CNT); - [P0] = R0; + /* issue a system soft reset */ + P1.h = hi(SICA_SWRST); + P1.l = lo(SICA_SWRST); + R1.l = 0x0007; + W[P1] = R1; SSYNC; - /* Program WDOG_STAT if necessary */ - P0.h = hi(WDOGA_CTL); - P0.l = lo(WDOGA_CTL); - R0 = W[P0](Z); - CC = BITTST(R0,1); - if !CC JUMP .LWRITESTAT; - CC = BITTST(R0,2); - if !CC JUMP .LWRITESTAT; - JUMP .LSKIP_WRITE; - -.LWRITESTAT: - /* When watch dog timer is enabled, - * a write to STAT will load the contents of CNT to STAT - */ - R0 = 0x0000(z); - P0.h = hi(WDOGA_STAT); - P0.l = lo(WDOGA_STAT) - [P0] = R0; - SSYNC; - -.LSKIP_WRITE: - /* Enable the reset event */ - P0.h = hi(WDOGA_CTL); - P0.l = lo(WDOGA_CTL); - R0 = W[P0](Z); - BITCLR(R0,1); - BITCLR(R0,2); - W[P0] = R0.L; - SSYNC; - NOP; - - /* Enable the wdog counter */ - R0 = W[P0](Z); - BITCLR(R0,4); - W[P0] = R0.L; + /* clear system soft reset */ + R0.l = 0x0000; + W[P0] = R0; SSYNC; - IDLE; + /* issue core reset */ + raise 1; RTS; +ENDPROC(_bfin_reset) .data diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index 8eb0a9023482b8..7d0368772cdaec 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -181,6 +181,12 @@ ENTRY(_ex_single_step) _return_from_exception: DEBUG_START_HWTRACE +#ifdef ANOMALY_05000257 + R7=LC0; + LC0=R7; + R7=LC1; + LC1=R7; +#endif (R7:6,P5:4) = [sp++]; ASTAT = [sp++]; sp = retn; @@ -706,6 +712,11 @@ _schedule_and_signal_from_int: p1.h = _evt_system_call; [p0] = p1; csync; + + /* Set orig_p0 to -1 to indicate this isn't the end of a syscall. */ + r0 = -1 (x); + [sp + PT_ORIG_P0] = r0; + p1 = rets; [sp + PT_RESERVED] = p1; diff --git a/arch/blackfin/mach-common/pm.c b/arch/blackfin/mach-common/pm.c index deb27272c658d6..afed5246dd9ea1 100644 --- a/arch/blackfin/mach-common/pm.c +++ b/arch/blackfin/mach-common/pm.c @@ -102,10 +102,8 @@ static int bfin_pm_prepare(suspend_state_t state) switch (state) { case PM_SUSPEND_STANDBY: break; - case PM_SUSPEND_MEM: - return -ENOTSUPP; - case PM_SUSPEND_DISK: + case PM_SUSPEND_MEM: return -ENOTSUPP; default: @@ -126,10 +124,8 @@ static int bfin_pm_enter(suspend_state_t state) case PM_SUSPEND_STANDBY: bfin_pm_suspend_standby_enter(); break; - case PM_SUSPEND_MEM: - return -ENOTSUPP; - case PM_SUSPEND_DISK: + case PM_SUSPEND_MEM: return -ENOTSUPP; default: @@ -155,9 +151,6 @@ static int bfin_pm_finish(suspend_state_t state) case PM_SUSPEND_MEM: return -ENOTSUPP; - case PM_SUSPEND_DISK: - return -ENOTSUPP; - default: return -EINVAL; } @@ -166,7 +159,6 @@ static int bfin_pm_finish(suspend_state_t state) } struct pm_ops bfin_pm_ops = { - .pm_disk_mode = PM_DISK_PLATFORM, .prepare = bfin_pm_prepare, .enter = bfin_pm_enter, .finish = bfin_pm_finish, diff --git a/arch/blackfin/mm/init.c b/arch/blackfin/mm/init.c index 73f72abed432a8..d6cf1059560dc5 100644 --- a/arch/blackfin/mm/init.c +++ b/arch/blackfin/mm/init.c @@ -116,7 +116,8 @@ void paging_init(void) { unsigned long zones_size[MAX_NR_ZONES] = { 0, }; - zones_size[ZONE_NORMAL] = (end_mem - PAGE_OFFSET) >> PAGE_SHIFT; + zones_size[ZONE_DMA] = (end_mem - PAGE_OFFSET) >> PAGE_SHIFT; + zones_size[ZONE_NORMAL] = 0; #ifdef CONFIG_HIGHMEM zones_size[ZONE_HIGHMEM] = 0; #endif diff --git a/arch/frv/Kconfig b/arch/frv/Kconfig index 114738a4558280..74eef7111f2bd4 100644 --- a/arch/frv/Kconfig +++ b/arch/frv/Kconfig @@ -102,14 +102,6 @@ config HIGHPTE with a lot of RAM, this can be wasteful of precious low memory. Setting this option will put user-space page tables in high memory. -config LARGE_ALLOCS - bool "Allow allocating large blocks (> 1MB) of memory" - help - Allow the slab memory allocator to keep chains for very large memory - sizes - up to 32MB. You may need this if your system has a lot of - RAM, and you need to able to allocate very large contiguous chunks. - If unsure, say N. - source "mm/Kconfig" choice diff --git a/arch/frv/kernel/vmlinux.lds.S b/arch/frv/kernel/vmlinux.lds.S index 28eae9735ad6b9..481dc137464016 100644 --- a/arch/frv/kernel/vmlinux.lds.S +++ b/arch/frv/kernel/vmlinux.lds.S @@ -101,13 +101,14 @@ SECTIONS _stext = .; .text : { *( - .text.start .text .text.* + .text.start .text.* #ifdef CONFIG_DEBUG_INFO .init.text .exit.text .exitcall.exit #endif ) + TEXT_TEXT SCHED_TEXT LOCK_TEXT *(.fixup) @@ -135,7 +136,8 @@ SECTIONS _sdata = .; .data : { /* Data */ - *(.data .data.*) + DATA_DATA + *(.data.*) *(.exit.data) CONSTRUCTORS } diff --git a/arch/h8300/kernel/vmlinux.lds.S b/arch/h8300/kernel/vmlinux.lds.S index 65f1cdc5ee0459..a2e72d495551cd 100644 --- a/arch/h8300/kernel/vmlinux.lds.S +++ b/arch/h8300/kernel/vmlinux.lds.S @@ -75,7 +75,7 @@ SECTIONS *(.int_redirect) #endif __stext = . ; - *(.text) + TEXT_TEXT SCHED_TEXT LOCK_TEXT __etext = . ; @@ -103,7 +103,7 @@ SECTIONS . = ALIGN(0x2000) ; *(.data.init_task) . = ALIGN(0x4) ; - *(.data) + DATA_DATA . = ALIGN(0x4) ; *(.data.*) diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig index c2d54b80223287..8770a5d0b1433f 100644 --- a/arch/i386/Kconfig +++ b/arch/i386/Kconfig @@ -891,7 +891,7 @@ config PHYSICAL_ALIGN Don't change this unless you know what you are doing. config HOTPLUG_CPU - bool "Support for hot-pluggable CPUs (EXPERIMENTAL)" + bool "Support for suspend on SMP and hot-pluggable CPUs (EXPERIMENTAL)" depends on SMP && HOTPLUG && EXPERIMENTAL && !X86_VOYAGER ---help--- Say Y here to experiment with turning CPUs off and on, and to diff --git a/arch/i386/Makefile b/arch/i386/Makefile index 6dc5e5d90fec10..bd28f9f9b4b7bf 100644 --- a/arch/i386/Makefile +++ b/arch/i386/Makefile @@ -34,7 +34,7 @@ CHECKFLAGS += -D__i386__ CFLAGS += -pipe -msoft-float -mregparm=3 -freg-struct-return # prevent gcc from keeping the stack 16 byte aligned -CFLAGS += -mpreferred-stack-boundary=4 +CFLAGS += $(call cc-option,-mpreferred-stack-boundary=2) # CPU-specific tuning. Anything which can be shared with UML should go here. include $(srctree)/arch/i386/Makefile.cpu diff --git a/arch/i386/boot/setup.S b/arch/i386/boot/setup.S index f8b3b9cda2b15b..6dbcc95b21209a 100644 --- a/arch/i386/boot/setup.S +++ b/arch/i386/boot/setup.S @@ -310,6 +310,8 @@ loader_ok: call verify_cpu testl %eax,%eax jz cpu_ok + movw %cs,%ax # aka SETUPSEG + movw %ax,%ds lea cpu_panic_mess,%si call prtstr 1: jmp 1b diff --git a/arch/i386/defconfig b/arch/i386/defconfig index 9da84412a8314a..1a3a2217b7c27c 100644 --- a/arch/i386/defconfig +++ b/arch/i386/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.21-git3 -# Tue May 1 07:30:51 2007 +# Linux kernel version: 2.6.22-rc2 +# Mon May 21 13:23:44 2007 # CONFIG_X86_32=y CONFIG_GENERIC_TIME=y @@ -14,6 +14,7 @@ CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_X86=y CONFIG_MMU=y CONFIG_ZONE_DMA=y +CONFIG_QUICKLIST=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_BUG=y @@ -45,6 +46,7 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=18 # CONFIG_CPUSETS is not set CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set @@ -64,14 +66,19 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set # # Loadable module support @@ -165,7 +172,7 @@ CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_TSC=y CONFIG_X86_CMOV=y -CONFIG_X86_MINIMUM_CPU_MODEL=4 +CONFIG_X86_MINIMUM_CPU_FAMILY=4 CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y CONFIG_NR_CPUS=32 @@ -211,6 +218,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 +CONFIG_NR_QUICK=1 # CONFIG_HIGHPTE is not set # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y @@ -237,7 +245,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_PM=y CONFIG_PM_LEGACY=y # CONFIG_PM_DEBUG is not set -CONFIG_PM_SYSFS_DEPRECATED=y +# CONFIG_PM_SYSFS_DEPRECATED is not set # # ACPI (Advanced Configuration and Power Interface) Support @@ -277,7 +285,7 @@ CONFIG_CPU_FREQ_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y -CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set # # CPUFreq processor drivers @@ -315,9 +323,10 @@ CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y # CONFIG_PCIEPORTBUS is not set +CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y # CONFIG_PCI_DEBUG is not set -# CONFIG_HT_IRQ is not set +CONFIG_HT_IRQ=y CONFIG_ISA_DMA_API=y # CONFIG_ISA is not set # CONFIG_MCA is not set @@ -328,10 +337,6 @@ CONFIG_K8_NB=y # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# # CONFIG_HOTPLUG_PCI is not set # @@ -377,7 +382,7 @@ CONFIG_IP_PNP_DHCP=y CONFIG_INET_TUNNEL=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y -# CONFIG_INET_XFRM_MODE_BEET is not set +CONFIG_INET_XFRM_MODE_BEET=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -396,7 +401,7 @@ CONFIG_IPV6=y # CONFIG_INET6_TUNNEL is not set CONFIG_INET6_XFRM_MODE_TRANSPORT=y CONFIG_INET6_XFRM_MODE_TUNNEL=y -# CONFIG_INET6_XFRM_MODE_BEET is not set +CONFIG_INET6_XFRM_MODE_BEET=y # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=y # CONFIG_IPV6_TUNNEL is not set @@ -450,7 +455,9 @@ CONFIG_IPV6_SIT=y # # CONFIG_CFG80211 is not set # CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set # # Device Drivers @@ -513,14 +520,12 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # Misc devices # # CONFIG_IBM_ASM is not set +# CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_SONY_LAPTOP is not set # CONFIG_THINKPAD_ACPI is not set - -# -# ATA/ATAPI/MFM/RLL support -# +# CONFIG_BLINK is not set CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y @@ -537,6 +542,7 @@ CONFIG_BLK_DEV_IDECD=y # CONFIG_BLK_DEV_IDESCSI is not set CONFIG_BLK_DEV_IDEACPI=y # CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes @@ -546,6 +552,7 @@ CONFIG_IDE_GENERIC=y # CONFIG_BLK_DEV_IDEPNP is not set CONFIG_BLK_DEV_IDEPCI=y # CONFIG_IDEPCI_SHARE_IRQ is not set +CONFIG_IDEPCI_PCIBUS_ORDER=y # CONFIG_BLK_DEV_OFFBOARD is not set # CONFIG_BLK_DEV_GENERIC is not set # CONFIG_BLK_DEV_OPTI621 is not set @@ -600,9 +607,8 @@ CONFIG_SCSI_NETLINK=y CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_CHR_DEV_SG=y +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set # @@ -612,6 +618,7 @@ CONFIG_CHR_DEV_SG=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -640,7 +647,6 @@ CONFIG_AIC7XXX_REG_PRETTY_PRINT=y CONFIG_SCSI_AIC79XX=y CONFIG_AIC79XX_CMDS_PER_DEVICE=32 CONFIG_AIC79XX_RESET_DELAY_MS=4000 -# CONFIG_AIC79XX_ENABLE_RD_STRM is not set # CONFIG_AIC79XX_DEBUG_ENABLE is not set CONFIG_AIC79XX_DEBUG_MASK=0 # CONFIG_AIC79XX_REG_PRETTY_PRINT is not set @@ -662,7 +668,6 @@ CONFIG_AIC79XX_DEBUG_MASK=0 # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_QLA_ISCSI is not set @@ -673,79 +678,12 @@ CONFIG_AIC79XX_DEBUG_MASK=0 # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_ESP_CORE is not set # CONFIG_SCSI_SRP is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# -CONFIG_ATA=y -# CONFIG_ATA_NONSTANDARD is not set -CONFIG_SATA_AHCI=y -CONFIG_SATA_SVW=y -CONFIG_ATA_PIIX=y -# CONFIG_SATA_MV is not set -CONFIG_SATA_NV=y -# CONFIG_PDC_ADMA is not set -# CONFIG_SATA_QSTOR is not set -# CONFIG_SATA_PROMISE is not set -# CONFIG_SATA_SX4 is not set -CONFIG_SATA_SIL=y -# CONFIG_SATA_SIL24 is not set -# CONFIG_SATA_SIS is not set -# CONFIG_SATA_ULI is not set -CONFIG_SATA_VIA=y -# CONFIG_SATA_VITESSE is not set -# CONFIG_SATA_INIC162X is not set -CONFIG_SATA_ACPI=y -# CONFIG_PATA_ALI is not set -# CONFIG_PATA_AMD is not set -# CONFIG_PATA_ARTOP is not set -# CONFIG_PATA_ATIIXP is not set -# CONFIG_PATA_CMD640_PCI is not set -# CONFIG_PATA_CMD64X is not set -# CONFIG_PATA_CS5520 is not set -# CONFIG_PATA_CS5530 is not set -# CONFIG_PATA_CS5535 is not set -# CONFIG_PATA_CYPRESS is not set -# CONFIG_PATA_EFAR is not set -# CONFIG_ATA_GENERIC is not set -# CONFIG_PATA_HPT366 is not set -# CONFIG_PATA_HPT37X is not set -# CONFIG_PATA_HPT3X2N is not set -# CONFIG_PATA_HPT3X3 is not set -# CONFIG_PATA_IT821X is not set -# CONFIG_PATA_IT8213 is not set -# CONFIG_PATA_JMICRON is not set -# CONFIG_PATA_TRIFLEX is not set -# CONFIG_PATA_MARVELL is not set -# CONFIG_PATA_MPIIX is not set -# CONFIG_PATA_OLDPIIX is not set -# CONFIG_PATA_NETCELL is not set -# CONFIG_PATA_NS87410 is not set -# CONFIG_PATA_OPTI is not set -# CONFIG_PATA_OPTIDMA is not set -# CONFIG_PATA_PDC_OLD is not set -# CONFIG_PATA_RADISYS is not set -# CONFIG_PATA_RZ1000 is not set -# CONFIG_PATA_SC1200 is not set -# CONFIG_PATA_SERVERWORKS is not set -# CONFIG_PATA_PDC2027X is not set -# CONFIG_PATA_SIL680 is not set -# CONFIG_PATA_SIS is not set -# CONFIG_PATA_VIA is not set -# CONFIG_PATA_WINBOND is not set +# CONFIG_ATA is not set # # Multi-device support (RAID and LVM) # -CONFIG_MD=y -# CONFIG_BLK_DEV_MD is not set -CONFIG_BLK_DEV_DM=y -# CONFIG_DM_DEBUG is not set -# CONFIG_DM_CRYPT is not set -# CONFIG_DM_SNAPSHOT is not set -# CONFIG_DM_MIRROR is not set -# CONFIG_DM_ZERO is not set -# CONFIG_DM_MULTIPATH is not set +# CONFIG_MD is not set # # Fusion MPT device support @@ -760,6 +698,7 @@ CONFIG_FUSION_MAX_SGE=128 # # IEEE 1394 (FireWire) support # +# CONFIG_FIREWIRE is not set CONFIG_IEEE1394=y # @@ -790,11 +729,7 @@ CONFIG_IEEE1394_RAWIO=y # I2O device support # # CONFIG_I2O is not set - -# -# Macintosh device drivers -# -# CONFIG_MAC_EMUMOUSEBTN is not set +# CONFIG_MACINTOSH_DRIVERS is not set # # Network device support @@ -810,10 +745,6 @@ CONFIG_NETDEVICES=y # ARCnet devices # # CONFIG_ARCNET is not set - -# -# PHY device support -# # CONFIG_PHYLIB is not set # @@ -824,9 +755,7 @@ CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set -CONFIG_NET_VENDOR_3COM=y -CONFIG_VORTEX=y -# CONFIG_TYPHOON is not set +# CONFIG_NET_VENDOR_3COM is not set # # Tulip family network device support @@ -867,10 +796,7 @@ CONFIG_8139TOO=y # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set - -# -# Ethernet (1000 Mbit) -# +CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set CONFIG_E1000=y @@ -890,16 +816,14 @@ CONFIG_TIGON3=y CONFIG_BNX2=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set - -# -# Ethernet (10000 Mbit) -# +CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set +# CONFIG_MLX4_CORE is not set # # Token Ring devices @@ -913,8 +837,14 @@ CONFIG_BNX2=y # CONFIG_WLAN_80211 is not set # -# Wan interfaces +# USB Network Adapters # +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set +# CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -967,9 +897,17 @@ CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_LIFEBOOK=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_APPLETOUCH is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -1019,10 +957,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # IPMI # # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# # CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM_INTEL=y @@ -1031,7 +965,6 @@ CONFIG_HW_RANDOM_GEODE=y CONFIG_HW_RANDOM_VIA=y # CONFIG_NVRAM is not set CONFIG_RTC=y -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_SONYPI is not set @@ -1056,17 +989,14 @@ CONFIG_MAX_RAW_DEVS=256 CONFIG_HPET=y # CONFIG_HPET_RTC_IRQ is not set CONFIG_HPET_MMAP=y -# CONFIG_HANGCHECK_TIMER is not set +CONFIG_HANGCHECK_TIMER=y # # TPM devices # # CONFIG_TCG_TPM is not set # CONFIG_TELCLOCK is not set - -# -# I2C support -# +CONFIG_DEVPORT=y # CONFIG_I2C is not set # @@ -1079,12 +1009,7 @@ CONFIG_HPET_MMAP=y # Dallas's 1-wire bus # # CONFIG_W1 is not set - -# -# Hardware Monitoring support -# # CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set # # Multifunction device drivers @@ -1095,17 +1020,20 @@ CONFIG_HPET_MMAP=y # Multimedia devices # # CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y # CONFIG_USB_DABUSB is not set # # Graphics support # # CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set # CONFIG_FB is not set # @@ -1114,7 +1042,7 @@ CONFIG_HPET_MMAP=y CONFIG_VGA_CONSOLE=y CONFIG_VGACON_SOFT_SCROLLBACK=y CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=128 -CONFIG_VIDEO_SELECT=y +# CONFIG_VIDEO_SELECT is not set CONFIG_DUMMY_CONSOLE=y # @@ -1131,14 +1059,10 @@ CONFIG_SOUND=y # Open Sound System # CONFIG_SOUND_PRIME=y -CONFIG_OBSOLETE_OSS=y -# CONFIG_SOUND_BT878 is not set -# CONFIG_SOUND_ES1371 is not set -CONFIG_SOUND_ICH=y +# CONFIG_OSS_OBSOLETE is not set # CONFIG_SOUND_TRIDENT is not set # CONFIG_SOUND_MSNDCLAS is not set # CONFIG_SOUND_MSNDPIN is not set -# CONFIG_SOUND_VIA82CXXX is not set # CONFIG_SOUND_OSS is not set # @@ -1217,37 +1141,10 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LIBUSUAL is not set # -# USB Input Devices -# -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_TOUCHSCREEN is not set -# CONFIG_USB_YEALINK is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set -# CONFIG_USB_ATI_REMOTE2 is not set -# CONFIG_USB_KEYSPAN_REMOTE is not set -# CONFIG_USB_APPLETOUCH is not set -# CONFIG_USB_GTCO is not set - -# # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET_MII is not set -# CONFIG_USB_USBNET is not set CONFIG_USB_MON=y # @@ -1291,10 +1188,6 @@ CONFIG_USB_MON=y # USB Gadget Support # # CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# # CONFIG_MMC is not set # @@ -1339,10 +1232,6 @@ CONFIG_USB_MON=y # # -# Auxiliary Display support -# - -# # Virtualization # # CONFIG_KVM is not set @@ -1383,7 +1272,6 @@ CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set -CONFIG_GENERIC_ACL=y # # CD-ROM/DVD Filesystems @@ -1411,7 +1299,7 @@ CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y +# CONFIG_TMPFS_POSIX_ACL is not set CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y @@ -1453,6 +1341,7 @@ CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1529,17 +1418,16 @@ CONFIG_KPROBES=y # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set -# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y CONFIG_UNUSED_SYMBOLS=y # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set -CONFIG_LOG_BUF_SHIFT=18 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set -CONFIG_TIMER_STATS=y +# CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -1556,6 +1444,7 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set # CONFIG_FRAME_POINTER is not set +# CONFIG_UNWIND_INFO is not set # CONFIG_FORCED_INLINING is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_LKDTM is not set @@ -1586,12 +1475,14 @@ CONFIG_DOUBLEFAULT=y CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y diff --git a/arch/i386/kernel/cpu/amd.c b/arch/i386/kernel/cpu/amd.c index 4fec702afd7e84..6f47eeeb93ea65 100644 --- a/arch/i386/kernel/cpu/amd.c +++ b/arch/i386/kernel/cpu/amd.c @@ -280,6 +280,10 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c) if (c->x86 == 0x10 && !force_mwait) clear_bit(X86_FEATURE_MWAIT, c->x86_capability); + + /* K6s reports MCEs but don't actually have all the MSRs */ + if (c->x86 < 6) + clear_bit(X86_FEATURE_MCE, c->x86_capability); } static unsigned int __cpuinit amd_size_cache(struct cpuinfo_x86 * c, unsigned int size) diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-ich.c b/arch/i386/kernel/cpu/cpufreq/speedstep-ich.c index b425cd3d183837..698f980eb44388 100644 --- a/arch/i386/kernel/cpu/cpufreq/speedstep-ich.c +++ b/arch/i386/kernel/cpu/cpufreq/speedstep-ich.c @@ -24,6 +24,7 @@ #include <linux/cpufreq.h> #include <linux/pci.h> #include <linux/slab.h> +#include <linux/sched.h> #include "speedstep-lib.h" diff --git a/arch/i386/kernel/cpu/cyrix.c b/arch/i386/kernel/cpu/cyrix.c index 0b8411a864fb41..e88d2fba156b89 100644 --- a/arch/i386/kernel/cpu/cyrix.c +++ b/arch/i386/kernel/cpu/cyrix.c @@ -7,6 +7,7 @@ #include <asm/processor.h> #include <asm/timer.h> #include <asm/pci-direct.h> +#include <asm/tsc.h> #include "cpu.h" diff --git a/arch/i386/kernel/cpu/mcheck/k7.c b/arch/i386/kernel/cpu/mcheck/k7.c index f9fa4142551e02..eef63e3630c2a6 100644 --- a/arch/i386/kernel/cpu/mcheck/k7.c +++ b/arch/i386/kernel/cpu/mcheck/k7.c @@ -72,12 +72,12 @@ void amd_mcheck_init(struct cpuinfo_x86 *c) u32 l, h; int i; - machine_check_vector = k7_machine_check; - wmb(); - if (!cpu_has(c, X86_FEATURE_MCE)) return; + machine_check_vector = k7_machine_check; + wmb(); + printk (KERN_INFO "Intel machine check architecture supported.\n"); rdmsr (MSR_IA32_MCG_CAP, l, h); if (l & (1<<8)) /* Control register present ? */ diff --git a/arch/i386/kernel/cpu/mtrr/cyrix.c b/arch/i386/kernel/cpu/mtrr/cyrix.c index 0737a596db434d..9edf5625584fc6 100644 --- a/arch/i386/kernel/cpu/mtrr/cyrix.c +++ b/arch/i386/kernel/cpu/mtrr/cyrix.c @@ -136,7 +136,7 @@ static void prepare_set(void) /* Save value of CR4 and clear Page Global Enable (bit 7) */ if ( cpu_has_pge ) { cr4 = read_cr4(); - write_cr4(cr4 & (unsigned char) ~(1 << 7)); + write_cr4(cr4 & ~X86_CR4_PGE); } /* Disable and flush caches. Note that wbinvd flushes the TLBs as diff --git a/arch/i386/kernel/cpu/mtrr/generic.c b/arch/i386/kernel/cpu/mtrr/generic.c index 5367e32e04032f..c4ebb5126ef7a8 100644 --- a/arch/i386/kernel/cpu/mtrr/generic.c +++ b/arch/i386/kernel/cpu/mtrr/generic.c @@ -78,7 +78,7 @@ static void __cpuinit print_fixed(unsigned base, unsigned step, const mtrr_type* } /* Grab all of the MTRR state for this CPU into *state */ -void __init get_mtrr_state(void) +void get_mtrr_state(void) { unsigned int i; struct mtrr_var_range *vrs; diff --git a/arch/i386/kernel/cpu/mtrr/main.c b/arch/i386/kernel/cpu/mtrr/main.c index 02a2f39e5e0a3c..1cf466df330ad5 100644 --- a/arch/i386/kernel/cpu/mtrr/main.c +++ b/arch/i386/kernel/cpu/mtrr/main.c @@ -639,7 +639,7 @@ static struct sysdev_driver mtrr_sysdev_driver = { * initialized (i.e. before smp_init()). * */ -void __init mtrr_bp_init(void) +void mtrr_bp_init(void) { init_ifs(); diff --git a/arch/i386/kernel/cpu/mtrr/state.c b/arch/i386/kernel/cpu/mtrr/state.c index f62ecd15811a9a..7b39a2f954d902 100644 --- a/arch/i386/kernel/cpu/mtrr/state.c +++ b/arch/i386/kernel/cpu/mtrr/state.c @@ -19,7 +19,7 @@ void set_mtrr_prepare_save(struct set_mtrr_context *ctxt) /* Save value of CR4 and clear Page Global Enable (bit 7) */ if ( cpu_has_pge ) { ctxt->cr4val = read_cr4(); - write_cr4(ctxt->cr4val & (unsigned char) ~(1 << 7)); + write_cr4(ctxt->cr4val & ~X86_CR4_PGE); } /* Disable and flush caches. Note that wbinvd flushes the TLBs as diff --git a/arch/i386/kernel/smp.c b/arch/i386/kernel/smp.c index c9a7c9835aba8b..6299c080f6e2e3 100644 --- a/arch/i386/kernel/smp.c +++ b/arch/i386/kernel/smp.c @@ -421,7 +421,7 @@ void flush_tlb_mm (struct mm_struct * mm) } if (!cpus_empty(cpu_mask)) flush_tlb_others(cpu_mask, mm, TLB_FLUSH_ALL); - check_pgt_cache(); + preempt_enable(); } diff --git a/arch/i386/kernel/verify_cpu.S b/arch/i386/kernel/verify_cpu.S index b2a9d80b64215a..f1d1eacf4ab023 100644 --- a/arch/i386/kernel/verify_cpu.S +++ b/arch/i386/kernel/verify_cpu.S @@ -2,6 +2,7 @@ This runs in 16bit mode so that the caller can still use the BIOS to output errors on the screen */ #include <asm/cpufeature.h> +#include <asm/msr.h> verify_cpu: pushfl # Save caller passed flags @@ -45,6 +46,32 @@ verify_cpu: cmpl $0x1,%eax jb bad # no cpuid 1 +#if REQUIRED_MASK1 & NEED_CMPXCHG64 + /* Some VIA C3s need magic MSRs to enable CX64. Do this here */ + cmpl $0x746e6543,%ebx # Cent + jne 1f + cmpl $0x48727561,%edx # aurH + jne 1f + cmpl $0x736c7561,%ecx # auls + jne 1f + movl $1,%eax # check model + cpuid + movl %eax,%ebx + shr $8,%ebx + andl $0xf,%ebx + cmp $6,%ebx # check family == 6 + jne 1f + shr $4,%eax + andl $0xf,%eax + cmpl $6,%eax # check model >= 6 + jb 1f + # assume models >= 6 all support this MSR + movl $MSR_VIA_FCR,%ecx + rdmsr + orl $((1<<1)|(1<<7)),%eax # enable CMPXCHG64 and PGE + wrmsr +1: +#endif movl $0x1,%eax # Does the cpu have what it takes cpuid diff --git a/arch/i386/kernel/vmlinux.lds.S b/arch/i386/kernel/vmlinux.lds.S index 80bec6640230c9..aa87b06c7c8233 100644 --- a/arch/i386/kernel/vmlinux.lds.S +++ b/arch/i386/kernel/vmlinux.lds.S @@ -44,7 +44,7 @@ SECTIONS /* read-only */ .text : AT(ADDR(.text) - LOAD_OFFSET) { - *(.text) + TEXT_TEXT SCHED_TEXT LOCK_TEXT KPROBES_TEXT @@ -74,7 +74,7 @@ SECTIONS /* writeable */ . = ALIGN(4096); .data : AT(ADDR(.data) - LOAD_OFFSET) { /* Data */ - *(.data) + DATA_DATA CONSTRUCTORS } :data diff --git a/arch/i386/mach-generic/bigsmp.c b/arch/i386/mach-generic/bigsmp.c index e932d3485ae252..58a477baec30b5 100644 --- a/arch/i386/mach-generic/bigsmp.c +++ b/arch/i386/mach-generic/bigsmp.c @@ -21,7 +21,7 @@ static int dmi_bigsmp; /* can be set by dmi scanners */ -static __init int hp_ht_bigsmp(struct dmi_system_id *d) +static int hp_ht_bigsmp(struct dmi_system_id *d) { #ifdef CONFIG_X86_GENERICARCH printk(KERN_NOTICE "%s detected: force use of apic=bigsmp\n", d->ident); @@ -31,7 +31,7 @@ static __init int hp_ht_bigsmp(struct dmi_system_id *d) } -static struct dmi_system_id __initdata bigsmp_dmi_table[] = { +static struct dmi_system_id bigsmp_dmi_table[] = { { hp_ht_bigsmp, "HP ProLiant DL760 G2", { DMI_MATCH(DMI_BIOS_VENDOR, "HP"), DMI_MATCH(DMI_BIOS_VERSION, "P44-"), @@ -45,7 +45,7 @@ static struct dmi_system_id __initdata bigsmp_dmi_table[] = { }; -static int __init probe_bigsmp(void) +static int probe_bigsmp(void) { if (def_to_bigsmp) dmi_bigsmp = 1; diff --git a/arch/i386/mm/mmap.c b/arch/i386/mm/mmap.c index e4730a1a43dda7..552e0847375585 100644 --- a/arch/i386/mm/mmap.c +++ b/arch/i386/mm/mmap.c @@ -27,6 +27,7 @@ #include <linux/personality.h> #include <linux/mm.h> #include <linux/random.h> +#include <linux/sched.h> /* * Top of mmap area (just below the process stack). diff --git a/arch/i386/oprofile/nmi_int.c b/arch/i386/oprofile/nmi_int.c index 8e185208dfd438..a7c0783b269a5e 100644 --- a/arch/i386/oprofile/nmi_int.c +++ b/arch/i386/oprofile/nmi_int.c @@ -131,7 +131,6 @@ static void nmi_save_registers(void * dummy) { int cpu = smp_processor_id(); struct op_msrs * msrs = &cpu_msrs[cpu]; - model->fill_in_addresses(msrs); nmi_cpu_save_registers(msrs); } @@ -195,6 +194,7 @@ static struct notifier_block profile_exceptions_nb = { static int nmi_setup(void) { int err=0; + int cpu; if (!allocate_msrs()) return -ENOMEM; @@ -207,6 +207,13 @@ static int nmi_setup(void) /* We need to serialize save and setup for HT because the subset * of msrs are distinct for save and setup operations */ + + /* Assume saved/restored counters are the same on all CPUs */ + model->fill_in_addresses(&cpu_msrs[0]); + for_each_possible_cpu (cpu) { + if (cpu != 0) + cpu_msrs[cpu] = cpu_msrs[0]; + } on_each_cpu(nmi_save_registers, NULL, 0, 1); on_each_cpu(nmi_cpu_setup, NULL, 0, 1); nmi_enabled = 1; diff --git a/arch/ia64/kernel/acpi-processor.c b/arch/ia64/kernel/acpi-processor.c index 4d4993a47e559f..5a216c019924ff 100644 --- a/arch/ia64/kernel/acpi-processor.c +++ b/arch/ia64/kernel/acpi-processor.c @@ -44,7 +44,7 @@ static void init_intel_pdc(struct acpi_processor *pr) buf[0] = ACPI_PDC_REVISION_ID; buf[1] = 1; - buf[2] |= ACPI_PDC_EST_CAPABILITY_SMP; + buf[2] = ACPI_PDC_EST_CAPABILITY_SMP; obj->type = ACPI_TYPE_BUFFER; obj->buffer.length = 12; diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c index 3549c94467b8a2..103dd8edda71bc 100644 --- a/arch/ia64/kernel/acpi.c +++ b/arch/ia64/kernel/acpi.c @@ -67,7 +67,8 @@ EXPORT_SYMBOL(pm_power_off); unsigned int acpi_cpei_override; unsigned int acpi_cpei_phys_cpuid; -const char *acpi_get_sysname(void) +const char __init * +acpi_get_sysname(void) { #ifdef CONFIG_IA64_GENERIC unsigned long rsdp_phys; @@ -791,7 +792,7 @@ static __init int setup_additional_cpus(char *s) early_param("additional_cpus", setup_additional_cpus); /* - * cpu_possible_map should be static, it cannot change as cpu's + * cpu_possible_map should be static, it cannot change as CPUs * are onlined, or offlined. The reason is per-cpu data-structures * are allocated by some modules at init time, and dont expect to * do this dynamically on cpu arrival/departure. diff --git a/arch/ia64/kernel/crash.c b/arch/ia64/kernel/crash.c index aeb79fb28f0bbd..1d64ef478dde93 100644 --- a/arch/ia64/kernel/crash.c +++ b/arch/ia64/kernel/crash.c @@ -156,24 +156,30 @@ kdump_init_notifier(struct notifier_block *self, unsigned long val, void *data) if (!kdump_on_init) return NOTIFY_DONE; - if (val != DIE_INIT_MONARCH_ENTER && - val != DIE_INIT_SLAVE_ENTER && + if (val != DIE_INIT_MONARCH_LEAVE && + val != DIE_INIT_SLAVE_LEAVE && + val != DIE_INIT_MONARCH_PROCESS && val != DIE_MCA_RENDZVOUS_LEAVE && val != DIE_MCA_MONARCH_LEAVE) return NOTIFY_DONE; nd = (struct ia64_mca_notify_die *)args->err; - /* Reason code 1 means machine check rendezous*/ - if ((val == DIE_INIT_MONARCH_ENTER || val == DIE_INIT_SLAVE_ENTER) && - nd->sos->rv_rc == 1) + /* Reason code 1 means machine check rendezvous*/ + if ((val == DIE_INIT_MONARCH_LEAVE || val == DIE_INIT_SLAVE_LEAVE + || val == DIE_INIT_MONARCH_PROCESS) && nd->sos->rv_rc == 1) return NOTIFY_DONE; switch (val) { - case DIE_INIT_MONARCH_ENTER: + case DIE_INIT_MONARCH_PROCESS: + atomic_set(&kdump_in_progress, 1); + *(nd->monarch_cpu) = -1; + break; + case DIE_INIT_MONARCH_LEAVE: machine_kdump_on_init(); break; - case DIE_INIT_SLAVE_ENTER: - unw_init_running(kdump_cpu_freeze, NULL); + case DIE_INIT_SLAVE_LEAVE: + if (atomic_read(&kdump_in_progress)) + unw_init_running(kdump_cpu_freeze, NULL); break; case DIE_MCA_RENDZVOUS_LEAVE: if (atomic_read(&kdump_in_progress)) @@ -215,8 +221,10 @@ static ctl_table sys_table[] = { static int machine_crash_setup(void) { + /* be notified before default_monarch_init_process */ static struct notifier_block kdump_init_notifier_nb = { .notifier_call = kdump_init_notifier, + .priority = 1, }; int ret; if((ret = register_die_notifier(&kdump_init_notifier_nb)) != 0) diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S index 144b056282af0c..95f517515235ef 100644 --- a/arch/ia64/kernel/entry.S +++ b/arch/ia64/kernel/entry.S @@ -1585,5 +1585,8 @@ sys_call_table: data8 sys_getcpu data8 sys_epoll_pwait // 1305 data8 sys_utimensat + data8 sys_signalfd + data8 sys_timerfd + data8 sys_eventfd .org sys_call_table + 8*NR_syscalls // guard against failures to increase NR_syscalls diff --git a/arch/ia64/kernel/irq.c b/arch/ia64/kernel/irq.c index b4c239685d2eb8..407b45870489eb 100644 --- a/arch/ia64/kernel/irq.c +++ b/arch/ia64/kernel/irq.c @@ -4,7 +4,7 @@ * Copyright (C) 1992, 1998 Linus Torvalds, Ingo Molnar * * This file contains the code used by various IRQ handling routines: - * asking for different IRQ's should be done through these routines + * asking for different IRQs should be done through these routines * instead of just grabbing them. Thus setups with different IRQ numbers * shouldn't result in any weird surprises, and installing new handlers * should be easier. @@ -12,7 +12,7 @@ * Copyright (C) Ashok Raj<ashok.raj@intel.com>, Intel Corporation 2004 * * 4/14/2004: Added code to handle cpu migration and do safe irq - * migration without lossing interrupts for iosapic + * migration without losing interrupts for iosapic * architecture. */ @@ -190,7 +190,7 @@ void fixup_irqs(void) } /* - * Phase 1: Locate irq's bound to this cpu and + * Phase 1: Locate IRQs bound to this cpu and * relocate them for cpu removal. */ migrate_irqs(); diff --git a/arch/ia64/kernel/irq_lsapic.c b/arch/ia64/kernel/irq_lsapic.c index c2f07beb17590f..e56a7a36aca30d 100644 --- a/arch/ia64/kernel/irq_lsapic.c +++ b/arch/ia64/kernel/irq_lsapic.c @@ -23,7 +23,7 @@ lsapic_noop_startup (unsigned int irq) static void lsapic_noop (unsigned int irq) { - /* nuthing to do... */ + /* nothing to do... */ } static int lsapic_retrigger(unsigned int irq) diff --git a/arch/ia64/kernel/kprobes.c b/arch/ia64/kernel/kprobes.c index 72e593e940531d..5bc46f1513443b 100644 --- a/arch/ia64/kernel/kprobes.c +++ b/arch/ia64/kernel/kprobes.c @@ -151,12 +151,12 @@ static uint __kprobes is_cmp_ctype_unc_inst(uint template, uint slot, cmp_inst.l = kprobe_inst; if ((cmp_inst.f.x2 == 0) || (cmp_inst.f.x2 == 1)) { - /* Integere compare - Register Register (A6 type)*/ + /* Integer compare - Register Register (A6 type)*/ if ((cmp_inst.f.tb == 0) && (cmp_inst.f.ta == 0) &&(cmp_inst.f.c == 1)) ctype_unc = 1; } else if ((cmp_inst.f.x2 == 2)||(cmp_inst.f.x2 == 3)) { - /* Integere compare - Immediate Register (A8 type)*/ + /* Integer compare - Immediate Register (A8 type)*/ if ((cmp_inst.f.ta == 0) &&(cmp_inst.f.c == 1)) ctype_unc = 1; } @@ -820,7 +820,7 @@ out: return 1; } -static int __kprobes kprobes_fault_handler(struct pt_regs *regs, int trapnr) +int __kprobes kprobes_fault_handler(struct pt_regs *regs, int trapnr) { struct kprobe *cur = kprobe_running(); struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); @@ -904,13 +904,6 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, if (post_kprobes_handler(args->regs)) ret = NOTIFY_STOP; break; - case DIE_PAGE_FAULT: - /* kprobe_running() needs smp_processor_id() */ - preempt_disable(); - if (kprobe_running() && - kprobes_fault_handler(args->regs, args->trapnr)) - ret = NOTIFY_STOP; - preempt_enable(); default: break; } @@ -954,7 +947,7 @@ int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) /* * Callee owns the argument space and could overwrite it, eg * tail call optimization. So to be absolutely safe - * we save the argument space before transfering the control + * we save the argument space before transferring the control * to instrumented jprobe function which runs in * the process context */ diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c index 26814de6c29ace..1ead5ea6c5ce71 100644 --- a/arch/ia64/kernel/mca.c +++ b/arch/ia64/kernel/mca.c @@ -273,7 +273,6 @@ static void ia64_mlogbuf_finish(int wait) mlogbuf_finished = 1; } -EXPORT_SYMBOL(ia64_mlogbuf_finish); /* * Print buffered messages from INIT context. @@ -1477,6 +1476,10 @@ default_monarch_init_process(struct notifier_block *self, unsigned long val, voi struct task_struct *g, *t; if (val != DIE_INIT_MONARCH_PROCESS) return NOTIFY_DONE; +#ifdef CONFIG_KEXEC + if (atomic_read(&kdump_in_progress)) + return NOTIFY_DONE; +#endif /* * FIXME: mlogbuf will brim over with INIT stack dumps. diff --git a/arch/ia64/kernel/mca_drv.c b/arch/ia64/kernel/mca_drv.c index 70b8bdbb7e6f8b..aba813c2c15067 100644 --- a/arch/ia64/kernel/mca_drv.c +++ b/arch/ia64/kernel/mca_drv.c @@ -438,7 +438,7 @@ is_mca_global(peidx_table_t *peidx, pal_bus_check_info_t *pbci, * @peidx: pointer of index of processor error section * * Return value: - * target address on Success / 0 on Failue + * target address on Success / 0 on Failure */ static u64 get_target_identifier(peidx_table_t *peidx) @@ -701,7 +701,7 @@ recover_from_processor_error(int platform, slidx_table_t *slidx, return fatal_mca("External bus check fatal status"); /* - * This is a local MCA and estimated as a recoverble error. + * This is a local MCA and estimated as a recoverable error. */ if (platform) return recover_from_platform_error(slidx, peidx, pbci, sos); diff --git a/arch/ia64/kernel/module.c b/arch/ia64/kernel/module.c index 158e3c51bb771f..196287928baebc 100644 --- a/arch/ia64/kernel/module.c +++ b/arch/ia64/kernel/module.c @@ -861,7 +861,7 @@ apply_relocate (Elf64_Shdr *sechdrs, const char *strtab, unsigned int symindex, /* * Modules contain a single unwind table which covers both the core and the init text * sections but since the two are not contiguous, we need to split this table up such that - * we can register (and unregister) each "segment" seperately. Fortunately, this sounds + * we can register (and unregister) each "segment" separately. Fortunately, this sounds * more complicated than it really is. */ static void diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c index e7191ca30b1658..b7133cabdbea98 100644 --- a/arch/ia64/kernel/perfmon.c +++ b/arch/ia64/kernel/perfmon.c @@ -1318,7 +1318,7 @@ pfm_reserve_session(struct task_struct *task, int is_syswide, unsigned int cpu) { unsigned long flags; /* - * validy checks on cpu_mask have been done upstream + * validity checks on cpu_mask have been done upstream */ LOCK_PFS(flags); @@ -1384,7 +1384,7 @@ pfm_unreserve_session(pfm_context_t *ctx, int is_syswide, unsigned int cpu) { unsigned long flags; /* - * validy checks on cpu_mask have been done upstream + * validity checks on cpu_mask have been done upstream */ LOCK_PFS(flags); @@ -1835,7 +1835,7 @@ pfm_flush(struct file *filp, fl_owner_t id) /* * remove our file from the async queue, if we use this mode. * This can be done without the context being protected. We come - * here when the context has become unreacheable by other tasks. + * here when the context has become unreachable by other tasks. * * We may still have active monitoring at this point and we may * end up in pfm_overflow_handler(). However, fasync_helper() @@ -2132,7 +2132,7 @@ doit: filp->private_data = NULL; /* - * if we free on the spot, the context is now completely unreacheable + * if we free on the spot, the context is now completely unreachable * from the callers side. The monitored task side is also cut, so we * can freely cut. * @@ -2562,7 +2562,7 @@ pfm_reset_pmu_state(pfm_context_t *ctx) ctx->ctx_all_pmcs[0] = pmu_conf->impl_pmcs[0] & ~0x1; /* - * bitmask of all PMDs that are accesible to this context + * bitmask of all PMDs that are accessible to this context */ ctx->ctx_all_pmds[0] = pmu_conf->impl_pmds[0]; @@ -3395,7 +3395,7 @@ pfm_read_pmds(pfm_context_t *ctx, void *arg, int count, struct pt_regs *regs) if (unlikely(!PMD_IS_IMPL(cnum))) goto error; /* * we can only read the register that we use. That includes - * the one we explicitely initialize AND the one we want included + * the one we explicitly initialize AND the one we want included * in the sampling buffer (smpl_regs). * * Having this restriction allows optimization in the ctxsw routine @@ -3715,7 +3715,7 @@ pfm_restart(pfm_context_t *ctx, void *arg, int count, struct pt_regs *regs) * if non-blocking, then we ensure that the task will go into * pfm_handle_work() before returning to user mode. * - * We cannot explicitely reset another task, it MUST always + * We cannot explicitly reset another task, it MUST always * be done by the task itself. This works for system wide because * the tool that is controlling the session is logically doing * "self-monitoring". @@ -4644,7 +4644,7 @@ pfm_exit_thread(struct task_struct *task) switch(state) { case PFM_CTX_UNLOADED: /* - * only comes to thios function if pfm_context is not NULL, i.e., cannot + * only comes to this function if pfm_context is not NULL, i.e., cannot * be in unloaded state */ printk(KERN_ERR "perfmon: pfm_exit_thread [%d] ctx unloaded\n", task->pid); @@ -5247,7 +5247,7 @@ pfm_end_notify_user(pfm_context_t *ctx) /* * main overflow processing routine. - * it can be called from the interrupt path or explicitely during the context switch code + * it can be called from the interrupt path or explicitly during the context switch code */ static void pfm_overflow_handler(struct task_struct *task, pfm_context_t *ctx, u64 pmc0, struct pt_regs *regs) diff --git a/arch/ia64/kernel/perfmon_mckinley.h b/arch/ia64/kernel/perfmon_mckinley.h index 9becccda28975f..c4bec7a9d18ffa 100644 --- a/arch/ia64/kernel/perfmon_mckinley.h +++ b/arch/ia64/kernel/perfmon_mckinley.h @@ -181,7 +181,7 @@ static pmu_config_t pmu_conf_mck={ .pmc_desc = pfm_mck_pmc_desc, .num_ibrs = 8, .num_dbrs = 8, - .use_rr_dbregs = 1 /* debug register are use for range retrictions */ + .use_rr_dbregs = 1 /* debug register are use for range restrictions */ }; diff --git a/arch/ia64/kernel/process.c b/arch/ia64/kernel/process.c index d1c3ed9943e52d..af73b8dfde282c 100644 --- a/arch/ia64/kernel/process.c +++ b/arch/ia64/kernel/process.c @@ -763,6 +763,9 @@ get_wchan (struct task_struct *p) unsigned long ip; int count = 0; + if (!p || p == current || p->state == TASK_RUNNING) + return 0; + /* * Note: p may not be a blocked task (it could be current or * another process running on some other CPU. Rather than @@ -773,6 +776,8 @@ get_wchan (struct task_struct *p) */ unw_init_from_blocked_task(&info, p); do { + if (p->state == TASK_RUNNING) + return 0; if (unw_unwind(&info) < 0) return 0; unw_get_ip(&info, &ip); diff --git a/arch/ia64/kernel/sal.c b/arch/ia64/kernel/sal.c index 37c876f95dba38..27c2ef445a565a 100644 --- a/arch/ia64/kernel/sal.c +++ b/arch/ia64/kernel/sal.c @@ -134,7 +134,7 @@ set_smp_redirect (int flag) * interrupt redirection. The reason is this would require that * All interrupts be stopped and hard bind the irq to a cpu. * Later when the interrupt is fired we need to set the redir hint - * on again in the vector. This is combersome for something that the + * on again in the vector. This is cumbersome for something that the * user mode irq balancer will solve anyways. */ no_int_routing=1; diff --git a/arch/ia64/kernel/salinfo.c b/arch/ia64/kernel/salinfo.c index 89f6b138a62cc2..25cd75f50ab106 100644 --- a/arch/ia64/kernel/salinfo.c +++ b/arch/ia64/kernel/salinfo.c @@ -162,7 +162,7 @@ static DEFINE_SPINLOCK(data_saved_lock); /** salinfo_platform_oemdata - optional callback to decode oemdata from an error * record. * @sect_header: pointer to the start of the section to decode. - * @oemdata: returns vmalloc area containing the decded output. + * @oemdata: returns vmalloc area containing the decoded output. * @oemdata_size: returns length of decoded output (strlen). * * Description: If user space asks for oem data to be decoded by the kernel diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index 9df1efe7487d8a..eaa6a24bc0b6e6 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -576,7 +576,7 @@ setup_arch (char **cmdline_p) } /* - * Display cpu info for all cpu's. + * Display cpu info for all CPUs. */ static int show_cpuinfo (struct seq_file *m, void *v) @@ -761,7 +761,7 @@ identify_cpu (struct cpuinfo_ia64 *c) c->cpu = smp_processor_id(); /* below default values will be overwritten by identify_siblings() - * for Multi-Threading/Multi-Core capable cpu's + * for Multi-Threading/Multi-Core capable CPUs */ c->threads_per_core = c->cores_per_socket = c->num_log = 1; c->socket_id = -1; @@ -947,7 +947,7 @@ cpu_init (void) ia32_cpu_init(); #endif - /* Clear ITC to eliminiate sched_clock() overflows in human time. */ + /* Clear ITC to eliminate sched_clock() overflows in human time. */ ia64_set_itc(0); /* disable all local interrupt sources: */ diff --git a/arch/ia64/kernel/smp.c b/arch/ia64/kernel/smp.c index 221de38045604e..b3a47f986e1e69 100644 --- a/arch/ia64/kernel/smp.c +++ b/arch/ia64/kernel/smp.c @@ -186,7 +186,7 @@ handle_IPI (int irq, void *dev_id) } /* - * Called with preeemption disabled. + * Called with preemption disabled. */ static inline void send_IPI_single (int dest_cpu, int op) @@ -196,7 +196,7 @@ send_IPI_single (int dest_cpu, int op) } /* - * Called with preeemption disabled. + * Called with preemption disabled. */ static inline void send_IPI_allbutself (int op) @@ -210,7 +210,7 @@ send_IPI_allbutself (int op) } /* - * Called with preeemption disabled. + * Called with preemption disabled. */ static inline void send_IPI_all (int op) @@ -223,7 +223,7 @@ send_IPI_all (int op) } /* - * Called with preeemption disabled. + * Called with preemption disabled. */ static inline void send_IPI_self (int op) @@ -252,7 +252,7 @@ kdump_smp_send_init(void) } #endif /* - * Called with preeemption disabled. + * Called with preemption disabled. */ void smp_send_reschedule (int cpu) @@ -261,7 +261,7 @@ smp_send_reschedule (int cpu) } /* - * Called with preeemption disabled. + * Called with preemption disabled. */ static void smp_send_local_flush_tlb (int cpu) diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c index a44792d0f3a97a..3c9d8e6089cf9b 100644 --- a/arch/ia64/kernel/smpboot.c +++ b/arch/ia64/kernel/smpboot.c @@ -370,7 +370,7 @@ smp_setup_percpu_timer (void) { } -static void __devinit +static void __cpuinit smp_callin (void) { int cpuid, phys_id, itc_master; @@ -456,7 +456,7 @@ smp_callin (void) /* * Activate a secondary processor. head.S calls this. */ -int __devinit +int __cpuinit start_secondary (void *unused) { /* Early console may use I/O ports */ @@ -694,7 +694,7 @@ int migrate_platform_irqs(unsigned int cpu) set_cpei_target_cpu(new_cpei_cpu); desc = irq_desc + ia64_cpe_irq; /* - * Switch for now, immediatly, we need to do fake intr + * Switch for now, immediately, we need to do fake intr * as other interrupts, but need to study CPEI behaviour with * polling before making changes. */ @@ -840,7 +840,7 @@ __cpu_up (unsigned int cpu) } /* - * Assume that CPU's have been discovered by some platform-dependent interface. For + * Assume that CPUs have been discovered by some platform-dependent interface. For * SoftSDV/Lion, that would be ACPI. * * Setup of the IPI irq handler is done in irq.c:init_IRQ_SMP(). @@ -854,7 +854,7 @@ init_smp_config(void) } *ap_startup; long sal_ret; - /* Tell SAL where to drop the AP's. */ + /* Tell SAL where to drop the APs. */ ap_startup = (struct fptr *) start_ap; sal_ret = ia64_sal_set_vectors(SAL_VECTOR_OS_BOOT_RENDEZ, ia64_tpa(ap_startup->fp), ia64_tpa(ap_startup->gp), 0, 0, 0, 0); diff --git a/arch/ia64/kernel/traps.c b/arch/ia64/kernel/traps.c index b8e0d70bf9893f..15ad85da15a9b2 100644 --- a/arch/ia64/kernel/traps.c +++ b/arch/ia64/kernel/traps.c @@ -304,7 +304,7 @@ handle_fpu_swa (int fp_fault, struct pt_regs *regs, unsigned long isr) * Lower 4 bits are used as a count. Upper bits are a sequence * number that is updated when count is reset. The cmpxchg will * fail is seqno has changed. This minimizes mutiple cpus - * reseting the count. + * resetting the count. */ if (current_jiffies > last.time) (void) cmpxchg_acq(&last.count, count, 16 + (count & ~15)); diff --git a/arch/ia64/kernel/unwind.c b/arch/ia64/kernel/unwind.c index fe1426266b9bf3..b0b08b5f3eca21 100644 --- a/arch/ia64/kernel/unwind.c +++ b/arch/ia64/kernel/unwind.c @@ -2,7 +2,7 @@ * Copyright (C) 1999-2004 Hewlett-Packard Co * David Mosberger-Tang <davidm@hpl.hp.com> * Copyright (C) 2003 Fenghua Yu <fenghua.yu@intel.com> - * - Change pt_regs_off() to make it less dependant on pt_regs structure. + * - Change pt_regs_off() to make it less dependent on pt_regs structure. */ /* * This file implements call frame unwind support for the Linux @@ -1860,7 +1860,7 @@ int unw_unwind (struct unw_frame_info *info) { unsigned long prev_ip, prev_sp, prev_bsp; - unsigned long ip, pr, num_regs; + unsigned long ip, pr, num_regs, rp_loc, pfs_loc; STAT(unsigned long start, flags;) int retval; @@ -1870,14 +1870,16 @@ unw_unwind (struct unw_frame_info *info) prev_sp = info->sp; prev_bsp = info->bsp; - /* restore the ip */ - if (!info->rp_loc) { + /* validate the return IP pointer */ + rp_loc = (unsigned long) info->rp_loc; + if ((rp_loc < info->regstk.limit) || (rp_loc > info->regstk.top)) { /* FIXME: should really be level 0 but it occurs too often. KAO */ UNW_DPRINT(1, "unwind.%s: failed to locate return link (ip=0x%lx)!\n", __FUNCTION__, info->ip); STAT(unw.stat.api.unwind_time += ia64_get_itc() - start; local_irq_restore(flags)); return -1; } + /* restore the ip */ ip = info->ip = *info->rp_loc; if (ip < GATE_ADDR) { UNW_DPRINT(2, "unwind.%s: reached user-space (ip=0x%lx)\n", __FUNCTION__, ip); @@ -1885,12 +1887,14 @@ unw_unwind (struct unw_frame_info *info) return -1; } - /* restore the cfm: */ - if (!info->pfs_loc) { + /* validate the previous stack frame pointer */ + pfs_loc = (unsigned long) info->pfs_loc; + if ((pfs_loc < info->regstk.limit) || (pfs_loc > info->regstk.top)) { UNW_DPRINT(0, "unwind.%s: failed to locate ar.pfs!\n", __FUNCTION__); STAT(unw.stat.api.unwind_time += ia64_get_itc() - start; local_irq_restore(flags)); return -1; } + /* restore the cfm: */ info->cfm_loc = info->pfs_loc; /* restore the bsp: */ @@ -1992,13 +1996,16 @@ init_frame_info (struct unw_frame_info *info, struct task_struct *t, memset(info, 0, sizeof(*info)); rbslimit = (unsigned long) t + IA64_RBS_OFFSET; + stklimit = (unsigned long) t + IA64_STK_OFFSET; + rbstop = sw->ar_bspstore; - if (rbstop - (unsigned long) t >= IA64_STK_OFFSET) + if (rbstop > stklimit || rbstop < rbslimit) rbstop = rbslimit; - stklimit = (unsigned long) t + IA64_STK_OFFSET; if (stktop <= rbstop) stktop = rbstop; + if (stktop > stklimit) + stktop = stklimit; info->regstk.limit = rbslimit; info->regstk.top = rbstop; diff --git a/arch/ia64/kernel/vmlinux.lds.S b/arch/ia64/kernel/vmlinux.lds.S index 69238264211876..5a65965c8b53b4 100644 --- a/arch/ia64/kernel/vmlinux.lds.S +++ b/arch/ia64/kernel/vmlinux.lds.S @@ -44,7 +44,7 @@ SECTIONS .text : AT(ADDR(.text) - LOAD_OFFSET) { IVT_TEXT - *(.text) + TEXT_TEXT SCHED_TEXT LOCK_TEXT KPROBES_TEXT @@ -214,7 +214,12 @@ SECTIONS data : { } :data .data : AT(ADDR(.data) - LOAD_OFFSET) - { *(.data) *(.data1) *(.gnu.linkonce.d*) CONSTRUCTORS } + { + DATA_DATA + *(.data1) + *(.gnu.linkonce.d*) + CONSTRUCTORS + } . = ALIGN(16); /* gp must be 16-byte aligned for exc. table */ .got : AT(ADDR(.got) - LOAD_OFFSET) diff --git a/arch/ia64/mm/discontig.c b/arch/ia64/mm/discontig.c index 38085ac183380a..0dbf0e81f8c00a 100644 --- a/arch/ia64/mm/discontig.c +++ b/arch/ia64/mm/discontig.c @@ -317,7 +317,7 @@ static void __meminit scatter_node_data(void) * node_online_map is not set for hot-added nodes at this time, * because we are halfway through initialization of the new node's * structures. If for_each_online_node() is used, a new node's - * pg_data_ptrs will be not initialized. Insted of using it, + * pg_data_ptrs will be not initialized. Instead of using it, * pgdat_list[] is checked. */ for_each_node(node) { diff --git a/arch/ia64/mm/fault.c b/arch/ia64/mm/fault.c index 21658e02116c5a..b87f785c24161f 100644 --- a/arch/ia64/mm/fault.c +++ b/arch/ia64/mm/fault.c @@ -19,36 +19,24 @@ extern void die (char *, struct pt_regs *, long); #ifdef CONFIG_KPROBES -ATOMIC_NOTIFIER_HEAD(notify_page_fault_chain); - -/* Hook to register for page fault notifications */ -int register_page_fault_notifier(struct notifier_block *nb) -{ - return atomic_notifier_chain_register(¬ify_page_fault_chain, nb); -} - -int unregister_page_fault_notifier(struct notifier_block *nb) +static inline int notify_page_fault(struct pt_regs *regs, int trap) { - return atomic_notifier_chain_unregister(¬ify_page_fault_chain, nb); -} + int ret = 0; + + if (!user_mode(regs)) { + /* kprobe_running() needs smp_processor_id() */ + preempt_disable(); + if (kprobe_running() && kprobes_fault_handler(regs, trap)) + ret = 1; + preempt_enable(); + } -static inline int notify_page_fault(enum die_val val, const char *str, - struct pt_regs *regs, long err, int trap, int sig) -{ - struct die_args args = { - .regs = regs, - .str = str, - .err = err, - .trapnr = trap, - .signr = sig - }; - return atomic_notifier_call_chain(¬ify_page_fault_chain, val, &args); + return ret; } #else -static inline int notify_page_fault(enum die_val val, const char *str, - struct pt_regs *regs, long err, int trap, int sig) +static inline int notify_page_fault(struct pt_regs *regs, int trap) { - return NOTIFY_DONE; + return 0; } #endif @@ -117,8 +105,7 @@ ia64_do_page_fault (unsigned long address, unsigned long isr, struct pt_regs *re /* * This is to handle the kprobes on user space access instructions */ - if (notify_page_fault(DIE_PAGE_FAULT, "page fault", regs, code, TRAP_BRKPT, - SIGSEGV) == NOTIFY_STOP) + if (notify_page_fault(regs, TRAP_BRKPT)) return; down_read(&mm->mmap_sem); diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c index 3549f3b4259294..73696b4a2eed42 100644 --- a/arch/ia64/pci/pci.c +++ b/arch/ia64/pci/pci.c @@ -354,10 +354,13 @@ pci_acpi_scan_root(struct acpi_device *device, int domain, int bus) acpi_walk_resources(device->handle, METHOD_NAME__CRS, count_window, &windows); - controller->window = kmalloc_node(sizeof(*controller->window) * windows, - GFP_KERNEL, controller->node); - if (!controller->window) - goto out2; + if (windows) { + controller->window = + kmalloc_node(sizeof(*controller->window) * windows, + GFP_KERNEL, controller->node); + if (!controller->window) + goto out2; + } name = kmalloc(16, GFP_KERNEL); if (!name) diff --git a/arch/ia64/sn/kernel/bte.c b/arch/ia64/sn/kernel/bte.c index ff1c55601178b2..b362d6d6a8c8f7 100644 --- a/arch/ia64/sn/kernel/bte.c +++ b/arch/ia64/sn/kernel/bte.c @@ -63,7 +63,7 @@ static inline void bte_start_transfer(struct bteinfo_s *bte, u64 len, u64 mode) * Use the block transfer engine to move kernel memory from src to dest * using the assigned mode. * - * Paramaters: + * Parameters: * src - physical address of the transfer source. * dest - physical address of the transfer destination. * len - number of bytes to transfer from source to dest. @@ -247,7 +247,7 @@ EXPORT_SYMBOL(bte_copy); * use the block transfer engine to move kernel * memory from src to dest using the assigned mode. * - * Paramaters: + * Parameters: * src - physical address of the transfer source. * dest - physical address of the transfer destination. * len - number of bytes to transfer from source to dest. @@ -255,7 +255,7 @@ EXPORT_SYMBOL(bte_copy); * for IBCT0/1 in the SGI documentation. * * NOTE: If the source, dest, and len are all cache line aligned, - * then it would be _FAR_ preferrable to use bte_copy instead. + * then it would be _FAR_ preferable to use bte_copy instead. */ bte_result_t bte_unaligned_copy(u64 src, u64 dest, u64 len, u64 mode) { @@ -300,7 +300,7 @@ bte_result_t bte_unaligned_copy(u64 src, u64 dest, u64 len, u64 mode) * a standard bte copy. * * One nasty exception to the above rule is when the - * source and destination are not symetrically + * source and destination are not symmetrically * mis-aligned. If the source offset from the first * cache line is different from the destination offset, * we make the first section be the entire transfer @@ -337,7 +337,7 @@ bte_result_t bte_unaligned_copy(u64 src, u64 dest, u64 len, u64 mode) if (footBcopyDest == (headBcopyDest + headBcopyLen)) { /* - * We have two contigous bcopy + * We have two contiguous bcopy * blocks. Merge them. */ headBcopyLen += footBcopyLen; @@ -375,7 +375,7 @@ bte_result_t bte_unaligned_copy(u64 src, u64 dest, u64 len, u64 mode) } else { /* - * The transfer is not symetric, we will + * The transfer is not symmetric, we will * allocate a buffer large enough for all the * data, bte_copy into that buffer and then * bcopy to the destination. diff --git a/arch/ia64/sn/kernel/bte_error.c b/arch/ia64/sn/kernel/bte_error.c index b6fcf8164f2b91..27c5936ccfe96b 100644 --- a/arch/ia64/sn/kernel/bte_error.c +++ b/arch/ia64/sn/kernel/bte_error.c @@ -105,7 +105,7 @@ int shub1_bte_error_handler(unsigned long _nodepda) } BTE_PRINTK(("eh:%p:%d Cleaning up\n", err_nodepda, smp_processor_id())); - /* Reenable both bte interfaces */ + /* Re-enable both bte interfaces */ imem.ii_imem_regval = REMOTE_HUB_L(nasid, IIO_IMEM); imem.ii_imem_fld_s.i_b0_esd = imem.ii_imem_fld_s.i_b1_esd = 1; REMOTE_HUB_S(nasid, IIO_IMEM, imem.ii_imem_regval); @@ -243,7 +243,7 @@ bte_crb_error_handler(cnodeid_t cnode, int btenum, /* * The caller has already figured out the error type, we save that - * in the bte handle structure for the thread excercising the + * in the bte handle structure for the thread exercising the * interface to consume. */ bte->bh_error = ioe->ie_errortype + BTEFAIL_OFFSET; diff --git a/arch/ia64/sn/kernel/io_common.c b/arch/ia64/sn/kernel/io_common.c index 7ed72d3faf7304..787ed642dd49a8 100644 --- a/arch/ia64/sn/kernel/io_common.c +++ b/arch/ia64/sn/kernel/io_common.c @@ -479,7 +479,7 @@ sn_io_early_init(void) } /* - * prime sn_pci_provider[]. Individial provider init routines will + * prime sn_pci_provider[]. Individual provider init routines will * override their respective default entries. */ diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c index a9bed5ca2ed8a5..684b1c984a445e 100644 --- a/arch/ia64/sn/kernel/setup.c +++ b/arch/ia64/sn/kernel/setup.c @@ -167,7 +167,7 @@ void __init early_sn_setup(void) * IO on SN2 is done via SAL calls, early_printk won't work without this. * * This code duplicates some of the ACPI table parsing that is in efi.c & sal.c. - * Any changes to those file may have to be made hereas well. + * Any changes to those file may have to be made here as well. */ efi_systab = (efi_system_table_t *) __va(ia64_boot_param->efi_systab); config_tables = __va(efi_systab->tables); @@ -194,7 +194,7 @@ void __init early_sn_setup(void) } extern int platform_intr_list[]; -static int __initdata shub_1_1_found; +static int __cpuinitdata shub_1_1_found; /* * sn_check_for_wars diff --git a/arch/ia64/sn/kernel/sn2/sn2_smp.c b/arch/ia64/sn/kernel/sn2/sn2_smp.c index 5d318b579fb1b0..033c8a9f000e60 100644 --- a/arch/ia64/sn/kernel/sn2/sn2_smp.c +++ b/arch/ia64/sn/kernel/sn2/sn2_smp.c @@ -104,7 +104,7 @@ static inline unsigned long wait_piowc(void) * * SN2 PIO writes from separate CPUs are not guaranteed to arrive in order. * Context switching user threads which have memory-mapped MMIO may cause - * PIOs to issue from seperate CPUs, thus the PIO writes must be drained + * PIOs to issue from separate CPUs, thus the PIO writes must be drained * from the previous CPU's Shub before execution resumes on the new CPU. */ void sn_migrate(struct task_struct *task) diff --git a/arch/ia64/sn/kernel/xpc_channel.c b/arch/ia64/sn/kernel/xpc_channel.c index c08db9c2375dd1..44ccc0d789c90b 100644 --- a/arch/ia64/sn/kernel/xpc_channel.c +++ b/arch/ia64/sn/kernel/xpc_channel.c @@ -293,7 +293,7 @@ xpc_pull_remote_cachelines(struct xpc_partition *part, void *dst, /* - * Pull the remote per partititon specific variables from the specified + * Pull the remote per partition specific variables from the specified * partition. */ enum xpc_retval @@ -461,7 +461,7 @@ xpc_allocate_local_msgqueue(struct xpc_channel *ch) // >>> may want to check for ch->flags & XPC_C_DISCONNECTING between // >>> iterations of the for-loop, bail if set? - // >>> should we impose a minumum #of entries? like 4 or 8? + // >>> should we impose a minimum #of entries? like 4 or 8? for (nentries = ch->local_nentries; nentries > 0; nentries--) { nbytes = nentries * ch->msg_size; @@ -514,7 +514,7 @@ xpc_allocate_remote_msgqueue(struct xpc_channel *ch) // >>> may want to check for ch->flags & XPC_C_DISCONNECTING between // >>> iterations of the for-loop, bail if set? - // >>> should we impose a minumum #of entries? like 4 or 8? + // >>> should we impose a minimum #of entries? like 4 or 8? for (nentries = ch->remote_nentries; nentries > 0; nentries--) { nbytes = nentries * ch->msg_size; @@ -1478,7 +1478,7 @@ xpc_teardown_infrastructure(struct xpc_partition *part) /* - * Before proceding with the teardown we have to wait until all + * Before proceeding with the teardown we have to wait until all * existing references cease. */ wait_event(part->teardown_wq, (atomic_read(&part->references) == 0)); diff --git a/arch/ia64/sn/kernel/xpnet.c b/arch/ia64/sn/kernel/xpnet.c index da721353097282..e58fcadff2e976 100644 --- a/arch/ia64/sn/kernel/xpnet.c +++ b/arch/ia64/sn/kernel/xpnet.c @@ -531,7 +531,7 @@ xpnet_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) dev_dbg(xpnet, "destination Partitions mask (dp) = 0x%lx\n", dp); /* - * If we wanted to allow promiscous mode to work like an + * If we wanted to allow promiscuous mode to work like an * unswitched network, this would be a good point to OR in a * mask of partitions which should be receiving all packets. */ diff --git a/arch/ia64/sn/pci/pci_dma.c b/arch/ia64/sn/pci/pci_dma.c index 7a291a27151186..d79ddacfba2d28 100644 --- a/arch/ia64/sn/pci/pci_dma.c +++ b/arch/ia64/sn/pci/pci_dma.c @@ -333,7 +333,7 @@ int sn_pci_legacy_read(struct pci_bus *bus, u16 port, u32 *val, u8 size) /* * First, try the SN_SAL_IOIF_PCI_SAFE SAL call which can work * around hw issues at the pci bus level. SGI proms older than - * 4.10 don't implment this. + * 4.10 don't implement this. */ SAL_CALL(isrv, SN_SAL_IOIF_PCI_SAFE, @@ -348,7 +348,7 @@ int sn_pci_legacy_read(struct pci_bus *bus, u16 port, u32 *val, u8 size) /* * If the above failed, retry using the SAL_PROBE call which should * be present in all proms (but which cannot work round PCI chipset - * bugs). This code is retained for compatability with old + * bugs). This code is retained for compatibility with old * pre-4.10 proms, and should be removed at some point in the future. */ @@ -379,7 +379,7 @@ int sn_pci_legacy_write(struct pci_bus *bus, u16 port, u32 val, u8 size) /* * First, try the SN_SAL_IOIF_PCI_SAFE SAL call which can work * around hw issues at the pci bus level. SGI proms older than - * 4.10 don't implment this. + * 4.10 don't implement this. */ SAL_CALL(isrv, SN_SAL_IOIF_PCI_SAFE, @@ -394,7 +394,7 @@ int sn_pci_legacy_write(struct pci_bus *bus, u16 port, u32 val, u8 size) /* * If the above failed, retry using the SAL_PROBE call which should * be present in all proms (but which cannot work round PCI chipset - * bugs). This code is retained for compatability with old + * bugs). This code is retained for compatibility with old * pre-4.10 proms, and should be removed at some point in the future. */ diff --git a/arch/ia64/sn/pci/pcibr/pcibr_ate.c b/arch/ia64/sn/pci/pcibr/pcibr_ate.c index 935029fc400d73..239b3cedcf2bfd 100644 --- a/arch/ia64/sn/pci/pcibr/pcibr_ate.c +++ b/arch/ia64/sn/pci/pcibr/pcibr_ate.c @@ -30,7 +30,7 @@ static void mark_ate(struct ate_resource *ate_resource, int start, int number, /* * find_free_ate: Find the first free ate index starting from the given - * index for the desired consequtive count. + * index for the desired consecutive count. */ static int find_free_ate(struct ate_resource *ate_resource, int start, int count) @@ -88,7 +88,7 @@ static inline int alloc_ate_resource(struct ate_resource *ate_resource, return -1; /* - * Find the required number of free consequtive ates. + * Find the required number of free consecutive ates. */ start_index = find_free_ate(ate_resource, ate_resource->lowest_free_index, @@ -105,7 +105,7 @@ static inline int alloc_ate_resource(struct ate_resource *ate_resource, /* * Allocate "count" contiguous Bridge Address Translation Entries * on the specified bridge to be used for PCI to XTALK mappings. - * Indices in rm map range from 1..num_entries. Indicies returned + * Indices in rm map range from 1..num_entries. Indices returned * to caller range from 0..num_entries-1. * * Return the start index on success, -1 on failure. diff --git a/arch/ia64/sn/pci/pcibr/pcibr_dma.c b/arch/ia64/sn/pci/pcibr/pcibr_dma.c index 95af40cb22f216..e626e50a938a3c 100644 --- a/arch/ia64/sn/pci/pcibr/pcibr_dma.c +++ b/arch/ia64/sn/pci/pcibr/pcibr_dma.c @@ -201,7 +201,7 @@ pcibr_dmatrans_direct32(struct pcidev_info * info, } /* - * Wrapper routine for free'ing DMA maps + * Wrapper routine for freeing DMA maps * DMA mappings for Direct 64 and 32 do not have any DMA maps. */ void diff --git a/arch/ia64/sn/pci/tioca_provider.c b/arch/ia64/sn/pci/tioca_provider.c index 8a2cb4e691fd69..b9bedbd6e1d628 100644 --- a/arch/ia64/sn/pci/tioca_provider.c +++ b/arch/ia64/sn/pci/tioca_provider.c @@ -223,7 +223,7 @@ tioca_fastwrite_enable(struct tioca_kernel *tioca_kern) /* * Scan all vga controllers on this bus making sure they all - * suport FW. If not, return. + * support FW. If not, return. */ list_for_each_entry(pdev, tioca_kern->ca_devices, bus_list) { @@ -364,7 +364,7 @@ tioca_dma_d48(struct pci_dev *pdev, u64 paddr) * @req_size: len (bytes) to map * * Map @paddr into CA address space using the GART mechanism. The mapped - * dma_addr_t is guarenteed to be contiguous in CA bus space. + * dma_addr_t is guaranteed to be contiguous in CA bus space. */ static dma_addr_t tioca_dma_mapped(struct pci_dev *pdev, u64 paddr, size_t req_size) @@ -526,7 +526,7 @@ tioca_dma_map(struct pci_dev *pdev, u64 paddr, size_t byte_count, int dma_flags) return 0; /* - * If card is 64 or 48 bit addresable, use a direct mapping. 32 + * If card is 64 or 48 bit addressable, use a direct mapping. 32 * bit direct is so restrictive w.r.t. where the memory resides that * we don't use it even though CA has some support. */ diff --git a/arch/ia64/sn/pci/tioce_provider.c b/arch/ia64/sn/pci/tioce_provider.c index 35f854fb6120ff..f4c0b961a9390c 100644 --- a/arch/ia64/sn/pci/tioce_provider.c +++ b/arch/ia64/sn/pci/tioce_provider.c @@ -256,9 +256,9 @@ pcidev_to_tioce(struct pci_dev *pdev, struct tioce __iomem **base, * @ct_addr: the coretalk address to map * @len: number of bytes to map * - * Given the addressing type, set up various paramaters that define the + * Given the addressing type, set up various parameters that define the * ATE pool to use. Search for a contiguous block of entries to cover the - * length, and if enough resources exist, fill in the ATE's and construct a + * length, and if enough resources exist, fill in the ATEs and construct a * tioce_dmamap struct to track the mapping. */ static u64 @@ -581,8 +581,8 @@ tioce_do_dma_map(struct pci_dev *pdev, u64 paddr, size_t byte_count, */ if (!mapaddr && !barrier && dma_mask >= 0xffffffffffUL) { /* - * We have two options for 40-bit mappings: 16GB "super" ATE's - * and 64MB "regular" ATE's. We'll try both if needed for a + * We have two options for 40-bit mappings: 16GB "super" ATEs + * and 64MB "regular" ATEs. We'll try both if needed for a * given mapping but which one we try first depends on the * size. For requests >64MB, prefer to use a super page with * regular as the fallback. Otherwise, try in the reverse order. @@ -687,8 +687,8 @@ tioce_error_intr_handler(int irq, void *arg) } /** - * tioce_reserve_m32 - reserve M32 ate's for the indicated address range - * @tioce_kernel: TIOCE context to reserve ate's for + * tioce_reserve_m32 - reserve M32 ATEs for the indicated address range + * @tioce_kernel: TIOCE context to reserve ATEs for * @base: starting bus address to reserve * @limit: last bus address to reserve * @@ -763,7 +763,7 @@ tioce_kern_init(struct tioce_common *tioce_common) /* * Set PMU pagesize to the largest size available, and zero out - * the ate's. + * the ATEs. */ tioce_mmr = (struct tioce __iomem *)tioce_common->ce_pcibus.bs_base; @@ -784,7 +784,7 @@ tioce_kern_init(struct tioce_common *tioce_common) } /* - * Reserve ATE's corresponding to reserved address ranges. These + * Reserve ATEs corresponding to reserved address ranges. These * include: * * Memory space covered by each PPB mem base/limit register diff --git a/arch/m32r/kernel/vmlinux.lds.S b/arch/m32r/kernel/vmlinux.lds.S index 6c73bca3f478cf..4e2d5b9f0a9abc 100644 --- a/arch/m32r/kernel/vmlinux.lds.S +++ b/arch/m32r/kernel/vmlinux.lds.S @@ -27,7 +27,7 @@ SECTIONS _text = .; /* Text and read-only data */ .boot : { *(.boot) } = 0 .text : { - *(.text) + TEXT_TEXT SCHED_TEXT LOCK_TEXT *(.fixup) @@ -50,7 +50,7 @@ SECTIONS .data : { /* Data */ *(.spu) *(.spi) - *(.data) + DATA_DATA CONSTRUCTORS } diff --git a/arch/m68k/kernel/vmlinux-std.lds b/arch/m68k/kernel/vmlinux-std.lds index 437b4f8d86c582..78f139226a1ba1 100644 --- a/arch/m68k/kernel/vmlinux-std.lds +++ b/arch/m68k/kernel/vmlinux-std.lds @@ -11,7 +11,7 @@ SECTIONS . = 0x1000; _text = .; /* Text and read-only data */ .text : { - *(.text) + TEXT_TEXT SCHED_TEXT LOCK_TEXT *(.fixup) @@ -28,7 +28,7 @@ SECTIONS _etext = .; /* End of text section */ .data : { /* Data */ - *(.data) + DATA_DATA CONSTRUCTORS } diff --git a/arch/m68k/kernel/vmlinux-sun3.lds b/arch/m68k/kernel/vmlinux-sun3.lds index 2868e206fc7681..c8999b2db23b01 100644 --- a/arch/m68k/kernel/vmlinux-sun3.lds +++ b/arch/m68k/kernel/vmlinux-sun3.lds @@ -12,7 +12,7 @@ SECTIONS _text = .; /* Text and read-only data */ .text : { *(.head) - *(.text) + TEXT_TEXT SCHED_TEXT LOCK_TEXT *(.fixup) @@ -23,7 +23,7 @@ SECTIONS _etext = .; /* End of text section */ .data : { /* Data */ - *(.data) + DATA_DATA CONSTRUCTORS . = ALIGN(16); /* Exception table */ __start___ex_table = .; diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig index 823f73736bb5b3..adc64a2bafbbdf 100644 --- a/arch/m68knommu/Kconfig +++ b/arch/m68knommu/Kconfig @@ -470,14 +470,6 @@ config AVNET default y depends on (AVNET5282) -config LARGE_ALLOCS - bool "Allow allocating large blocks (> 1MB) of memory" - help - Allow the slab memory allocator to keep chains for very large - memory sizes - upto 32MB. You may need this if your system has - a lot of RAM, and you need to able to allocate very large - contiguous chunks. If unsure, say N. - config 4KSTACKS bool "Use 4Kb for kernel stacks instead of 8Kb" default y diff --git a/arch/m68knommu/kernel/vmlinux.lds.S b/arch/m68knommu/kernel/vmlinux.lds.S index c86a1bf589d458..07a0055602f447 100644 --- a/arch/m68knommu/kernel/vmlinux.lds.S +++ b/arch/m68knommu/kernel/vmlinux.lds.S @@ -62,7 +62,7 @@ SECTIONS { .text : { _text = .; _stext = . ; - *(.text) + TEXT_TEXT SCHED_TEXT *(.text.lock) @@ -133,7 +133,7 @@ SECTIONS { .data DATA_ADDR : { . = ALIGN(4); _sdata = . ; - *(.data) + DATA_DATA . = ALIGN(8192) ; *(.data.init_task) _edata = . ; diff --git a/arch/mips/kernel/unaligned.c b/arch/mips/kernel/unaligned.c index a7d49ae805b436..18c4a3c45a31c0 100644 --- a/arch/mips/kernel/unaligned.c +++ b/arch/mips/kernel/unaligned.c @@ -76,7 +76,7 @@ #include <linux/module.h> #include <linux/signal.h> #include <linux/smp.h> - +#include <linux/sched.h> #include <asm/asm.h> #include <asm/branch.h> #include <asm/byteorder.h> diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S index 043f637e3d106c..9b9992cd562acd 100644 --- a/arch/mips/kernel/vmlinux.lds.S +++ b/arch/mips/kernel/vmlinux.lds.S @@ -27,7 +27,7 @@ SECTIONS /* read-only */ _text = .; /* Text and read-only data */ .text : { - *(.text) + TEXT_TEXT SCHED_TEXT LOCK_TEXT *(.fixup) @@ -62,7 +62,7 @@ SECTIONS . = ALIGN(_PAGE_SIZE); *(.data.init_task) - *(.data) + DATA_DATA CONSTRUCTORS } diff --git a/arch/mips/mm/ioremap.c b/arch/mips/mm/ioremap.c index cea7d0ea36e44c..59945b9ee23c18 100644 --- a/arch/mips/mm/ioremap.c +++ b/arch/mips/mm/ioremap.c @@ -9,7 +9,7 @@ #include <linux/module.h> #include <asm/addrspace.h> #include <asm/byteorder.h> - +#include <linux/sched.h> #include <linux/vmalloc.h> #include <asm/cacheflush.h> #include <asm/io.h> diff --git a/arch/mips/sgi-ip32/Makefile b/arch/mips/sgi-ip32/Makefile index 7e1416768a60bd..60f0227425e709 100644 --- a/arch/mips/sgi-ip32/Makefile +++ b/arch/mips/sgi-ip32/Makefile @@ -3,5 +3,5 @@ # under Linux. # -obj-y += ip32-berr.o ip32-irq.o ip32-setup.o ip32-reset.o \ +obj-y += ip32-berr.o ip32-irq.o ip32-platform.o ip32-setup.o ip32-reset.o \ crime.o ip32-memory.o diff --git a/arch/mips/sgi-ip32/ip32-platform.c b/arch/mips/sgi-ip32/ip32-platform.c new file mode 100644 index 00000000000000..120b15932caf03 --- /dev/null +++ b/arch/mips/sgi-ip32/ip32-platform.c @@ -0,0 +1,20 @@ +#include <linux/init.h> +#include <linux/platform_device.h> + +static __init int meth_devinit(void) +{ + struct platform_device *pd; + int ret; + + pd = platform_device_alloc("meth", -1); + if (!pd) + return -ENOMEM; + + ret = platform_device_add(pd); + if (ret) + platform_device_put(pd); + + return ret; +} + +device_initcall(meth_devinit); diff --git a/arch/parisc/kernel/cache.c b/arch/parisc/kernel/cache.c index 0dc924ccceb51c..395bbce649937e 100644 --- a/arch/parisc/kernel/cache.c +++ b/arch/parisc/kernel/cache.c @@ -18,7 +18,7 @@ #include <linux/module.h> #include <linux/seq_file.h> #include <linux/pagemap.h> - +#include <linux/sched.h> #include <asm/pdc.h> #include <asm/cache.h> #include <asm/cacheflush.h> diff --git a/arch/parisc/kernel/processor.c b/arch/parisc/kernel/processor.c index dd5d0cb6b34736..566226d78bc9c5 100644 --- a/arch/parisc/kernel/processor.c +++ b/arch/parisc/kernel/processor.c @@ -33,7 +33,7 @@ #include <linux/seq_file.h> #include <linux/slab.h> #include <linux/cpu.h> - +#include <asm/param.h> #include <asm/cache.h> #include <asm/hardware.h> /* for register_parisc_driver() stuff */ #include <asm/processor.h> diff --git a/arch/parisc/kernel/vmlinux.lds.S b/arch/parisc/kernel/vmlinux.lds.S index c745859905982a..4d96ba4b984986 100644 --- a/arch/parisc/kernel/vmlinux.lds.S +++ b/arch/parisc/kernel/vmlinux.lds.S @@ -51,7 +51,7 @@ SECTIONS _text = .; /* Text and read-only data */ .text ALIGN(16) : { - *(.text) + TEXT_TEXT SCHED_TEXT LOCK_TEXT *(.text.do_softirq) @@ -91,7 +91,7 @@ SECTIONS . = ALIGN(L1_CACHE_BYTES); .data : { /* Data */ - *(.data) + DATA_DATA CONSTRUCTORS } diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 56d3c0dcd2b802..5eaeafd30bdfe2 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -118,6 +118,7 @@ config GENERIC_BUG depends on BUG config SYS_SUPPORTS_APM_EMULATION + default y if PMAC_APM_EMU bool config DEFAULT_UIMAGE diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index d6014a67694b5a..6238b5875fd1c7 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -29,7 +29,7 @@ CROSS32CC := $(CC) -m32 CROSS32AS := $(AS) -a32 CROSS32LD := $(LD) -m elf32ppc CROSS32OBJCOPY := $(OBJCOPY) -CROSS32AR := $(AR) +CROSS32AR := GNUTARGET=elf32-powerpc $(AR) endif endif @@ -58,6 +58,7 @@ ifeq ($(HAS_BIARCH),y) override AS += -a$(SZ) override LD += -m elf$(SZ)ppc override CC += -m$(SZ) +override AR := GNUTARGET=elf$(SZ)-powerpc $(AR) endif LDFLAGS_vmlinux := -Bstatic diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index d4f9fef7f9e90e..83788986b93b34 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -33,6 +33,9 @@ endif BOOTCFLAGS += -I$(obj) -I$(srctree)/$(obj) +$(obj)/44x.o: BOOTCFLAGS += -Wa,-mbooke +$(obj)/ebony.o: BOOTCFLAGS += -Wa,-mbooke + zlib := inffast.c inflate.c inftrees.c zlibheader := inffast.h inffixed.h inflate.h inftrees.h infutil.h zliblinuxheader := zlib.h zconf.h zutil.h @@ -54,13 +57,13 @@ obj-wlib := $(addsuffix .o, $(basename $(addprefix $(obj)/, $(src-wlib)))) obj-plat := $(addsuffix .o, $(basename $(addprefix $(obj)/, $(src-plat)))) quiet_cmd_copy_zlib = COPY $@ - cmd_copy_zlib = sed "s@__attribute_used__@@;s@<linux/\([^>]\+\).*@\"\1\"@" $< > $@ + cmd_copy_zlib = sed "s@__attribute_used__@@;s@<linux/\([^>]*\).*@\"\1\"@" $< > $@ quiet_cmd_copy_zlibheader = COPY $@ - cmd_copy_zlibheader = sed "s@<linux/\([^>]\+\).*@\"\1\"@" $< > $@ + cmd_copy_zlibheader = sed "s@<linux/\([^>]*\).*@\"\1\"@" $< > $@ # stddef.h for NULL quiet_cmd_copy_zliblinuxheader = COPY $@ - cmd_copy_zliblinuxheader = sed "s@<linux/string.h>@\"string.h\"@;s@<linux/kernel.h>@<stddef.h>@;s@<linux/\([^>]\+\).*@\"\1\"@" $< > $@ + cmd_copy_zliblinuxheader = sed "s@<linux/string.h>@\"string.h\"@;s@<linux/kernel.h>@<stddef.h>@;s@<linux/\([^>]*\).*@\"\1\"@" $< > $@ $(addprefix $(obj)/,$(zlib)): $(obj)/%: $(srctree)/lib/zlib_inflate/% $(call cmd,copy_zlib) @@ -204,12 +207,12 @@ dts = $(if $(shell echo $(CONFIG_DEVICE_TREE) | grep '^/'),\ $(obj)/cuImage.%: vmlinux $(dts) $(wrapperbits) $(call if_changed,wrap,cuboot-$*,$(dts)) -$(obj)/treeImage.%: vmlinux $(dts) $(wrapperbits) - $(call if_changed,wrap,treeboot-$*,$(dts)) - $(obj)/treeImage.initrd.%: vmlinux $(dts) $(wrapperbits) $(call if_changed,wrap,treeboot-$*,$(dts),,$(obj)/ramdisk.image.gz) +$(obj)/treeImage.%: vmlinux $(dts) $(wrapperbits) + $(call if_changed,wrap,treeboot-$*,$(dts)) + $(obj)/zImage: $(addprefix $(obj)/, $(image-y)) @rm -f $@; ln $< $@ $(obj)/zImage.initrd: $(addprefix $(obj)/, $(initrd-y)) diff --git a/arch/powerpc/boot/dts/ebony.dts b/arch/powerpc/boot/dts/ebony.dts index b67918651c4890..0ec02f4726b592 100644 --- a/arch/powerpc/boot/dts/ebony.dts +++ b/arch/powerpc/boot/dts/ebony.dts @@ -33,8 +33,8 @@ timebase-frequency = <0>; // Filled in by zImage i-cache-line-size = <32>; d-cache-line-size = <32>; - i-cache-size = <0>; - d-cache-size = <0>; + i-cache-size = <8000>; /* 32 kB */ + d-cache-size = <8000>; /* 32 kB */ dcr-controller; dcr-access-method = "native"; }; @@ -46,7 +46,6 @@ }; UIC0: interrupt-controller0 { - device_type = "ibm,uic"; compatible = "ibm,uic-440gp", "ibm,uic"; interrupt-controller; cell-index = <0>; @@ -58,7 +57,6 @@ }; UIC1: interrupt-controller1 { - device_type = "ibm,uic"; compatible = "ibm,uic-440gp", "ibm,uic"; interrupt-controller; cell-index = <1>; @@ -71,36 +69,36 @@ }; CPC0: cpc { - device_type = "ibm,cpc"; compatible = "ibm,cpc-440gp"; dcr-reg = <0b0 003 0e0 010>; // FIXME: anything else? }; plb { - device_type = "ibm,plb"; compatible = "ibm,plb-440gp", "ibm,plb4"; #address-cells = <2>; #size-cells = <1>; ranges; clock-frequency = <0>; // Filled in by zImage - SDRAM0: sdram { - device_type = "memory-controller"; - compatible = "ibm,sdram-440gp", "ibm,sdram"; + SDRAM0: memory-controller { + compatible = "ibm,sdram-440gp"; dcr-reg = <010 2>; // FIXME: anything else? }; + SRAM0: sram { + compatible = "ibm,sram-440gp"; + dcr-reg = <020 8 00a 1>; + }; + DMA0: dma { // FIXME: ??? - device_type = "ibm,dma-4xx"; - compatible = "ibm,dma-440gp", "ibm,dma-4xx"; + compatible = "ibm,dma-440gp"; dcr-reg = <100 027>; }; MAL0: mcmal { - device_type = "mcmal-dma"; compatible = "ibm,mcmal-440gp", "ibm,mcmal"; dcr-reg = <180 62>; num-tx-chans = <4>; @@ -119,7 +117,6 @@ }; POB0: opb { - device_type = "ibm,opb"; compatible = "ibm,opb-440gp", "ibm,opb"; #address-cells = <1>; #size-cells = <1>; @@ -133,8 +130,7 @@ clock-frequency = <0>; // Filled in by zImage EBC0: ebc { - device_type = "ibm,ebc"; - compatible = "ibm,ebc-440gp"; + compatible = "ibm,ebc-440gp", "ibm,ebc"; dcr-reg = <012 2>; #address-cells = <2>; #size-cells = <1>; @@ -147,7 +143,7 @@ interrupts = <5 4>; interrupt-parent = <&UIC1>; - small-flash@0,0 { + small-flash@0,80000 { device_type = "rom"; compatible = "direct-mapped"; probe-type = "JEDEC"; @@ -159,7 +155,6 @@ ds1743@1,0 { /* NVRAM & RTC */ - device_type = "nvram"; compatible = "ds1743"; reg = <1 0 2000>; }; @@ -170,7 +165,7 @@ probe-type = "JEDEC"; bank-width = <1>; partitions = <0 380000 - 280000 80000>; + 380000 80000>; partition-names = "fs", "firmware"; reg = <2 0 400000>; }; @@ -226,13 +221,11 @@ GPIO0: gpio@40000700 { /* FIXME */ - device_type = "gpio"; compatible = "ibm,gpio-440gp"; reg = <40000700 20>; }; ZMII0: emac-zmii@40000780 { - device_type = "emac-zmii"; compatible = "ibm,zmii-440gp", "ibm,zmii"; reg = <40000780 c>; }; @@ -299,9 +292,5 @@ chosen { linux,stdout-path = "/plb/opb/serial@40000200"; -// linux,initrd-start = <0>; /* FIXME */ -// linux,initrd-end = <0>; -// bootargs = ""; }; }; - diff --git a/arch/powerpc/boot/dts/kuroboxHD.dts b/arch/powerpc/boot/dts/kuroboxHD.dts index 157dc98d3988bd..a983680c326384 100644 --- a/arch/powerpc/boot/dts/kuroboxHD.dts +++ b/arch/powerpc/boot/dts/kuroboxHD.dts @@ -21,19 +21,16 @@ build with: "dtc -f -I dts -O dtb -o kuroboxHD.dtb -V 16 kuroboxHD.dts" */ / { - linux,phandle = <1000>; model = "KuroboxHD"; compatible = "linkstation"; #address-cells = <1>; #size-cells = <1>; cpus { - linux,phandle = <2000>; #address-cells = <1>; #size-cells = <0>; PowerPC,603e { /* Really 8241 */ - linux,phandle = <2100>; device_type = "cpu"; reg = <0>; clock-frequency = <bebc200>; /* Fixed by bootwrapper */ @@ -48,13 +45,11 @@ build with: "dtc -f -I dts -O dtb -o kuroboxHD.dtb -V 16 kuroboxHD.dts" }; memory { - linux,phandle = <3000>; device_type = "memory"; reg = <00000000 04000000>; }; soc10x { /* AFAICT need to make soc for 8245's uarts to be defined */ - linux,phandle = <4000>; #address-cells = <1>; #size-cells = <1>; #interrupt-cells = <2>; @@ -69,38 +64,34 @@ build with: "dtc -f -I dts -O dtb -o kuroboxHD.dtb -V 16 kuroboxHD.dts" fef00000 fef00000 00100000>; /* pci iack */ i2c@80003000 { - linux,phandle = <4300>; device_type = "i2c"; compatible = "fsl-i2c"; reg = <80003000 1000>; interrupts = <5 2>; - interrupt-parent = <4400>; + interrupt-parent = <&mpic>; }; serial@80004500 { - linux,phandle = <4511>; device_type = "serial"; compatible = "ns16550"; reg = <80004500 8>; clock-frequency = <5d08d88>; current-speed = <2580>; interrupts = <9 2>; - interrupt-parent = <4400>; + interrupt-parent = <&mpic>; }; serial@80004600 { - linux,phandle = <4512>; device_type = "serial"; compatible = "ns16550"; reg = <80004600 8>; clock-frequency = <5d08d88>; current-speed = <e100>; interrupts = <a 0>; - interrupt-parent = <4400>; + interrupt-parent = <&mpic>; }; - pic@80040000 { - linux,phandle = <4400>; + mpic: pic@80040000 { #interrupt-cells = <2>; #address-cells = <0>; device_type = "open-pic"; @@ -111,7 +102,6 @@ build with: "dtc -f -I dts -O dtb -o kuroboxHD.dtb -V 16 kuroboxHD.dts" }; pci@fec00000 { - linux,phandle = <4500>; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; @@ -122,24 +112,24 @@ build with: "dtc -f -I dts -O dtb -o kuroboxHD.dtb -V 16 kuroboxHD.dts" 02000000 0 80000000 80000000 0 70000000>; bus-range = <0 ff>; clock-frequency = <7f28155>; - interrupt-parent = <4400>; + interrupt-parent = <&mpic>; interrupt-map-mask = <f800 0 0 7>; interrupt-map = < /* IDSEL 11 - IRQ0 ETH */ - 5800 0 0 1 4400 0 1 - 5800 0 0 2 4400 1 1 - 5800 0 0 3 4400 2 1 - 5800 0 0 4 4400 3 1 + 5800 0 0 1 &mpic 0 1 + 5800 0 0 2 &mpic 1 1 + 5800 0 0 3 &mpic 2 1 + 5800 0 0 4 &mpic 3 1 /* IDSEL 12 - IRQ1 IDE0 */ - 6000 0 0 1 4400 1 1 - 6000 0 0 2 4400 2 1 - 6000 0 0 3 4400 3 1 - 6000 0 0 4 4400 0 1 + 6000 0 0 1 &mpic 1 1 + 6000 0 0 2 &mpic 2 1 + 6000 0 0 3 &mpic 3 1 + 6000 0 0 4 &mpic 0 1 /* IDSEL 14 - IRQ3 USB2.0 */ - 7000 0 0 1 4400 3 1 - 7000 0 0 2 4400 3 1 - 7000 0 0 3 4400 3 1 - 7000 0 0 4 4400 3 1 + 7000 0 0 1 &mpic 3 1 + 7000 0 0 2 &mpic 3 1 + 7000 0 0 3 &mpic 3 1 + 7000 0 0 4 &mpic 3 1 >; }; }; diff --git a/arch/powerpc/boot/dts/kuroboxHG.dts b/arch/powerpc/boot/dts/kuroboxHG.dts index 919eb29097dba6..5cf42dc022dfa8 100644 --- a/arch/powerpc/boot/dts/kuroboxHG.dts +++ b/arch/powerpc/boot/dts/kuroboxHG.dts @@ -21,19 +21,16 @@ build with: "dtc -f -I dts -O dtb -o kuroboxHG.dtb -V 16 kuroboxHG.dts" */ / { - linux,phandle = <1000>; model = "KuroboxHG"; compatible = "linkstation"; #address-cells = <1>; #size-cells = <1>; cpus { - linux,phandle = <2000>; #address-cells = <1>; #size-cells = <0>; PowerPC,603e { /* Really 8241 */ - linux,phandle = <2100>; device_type = "cpu"; reg = <0>; clock-frequency = <fdad680>; /* Fixed by bootwrapper */ @@ -48,13 +45,11 @@ build with: "dtc -f -I dts -O dtb -o kuroboxHG.dtb -V 16 kuroboxHG.dts" }; memory { - linux,phandle = <3000>; device_type = "memory"; reg = <00000000 08000000>; }; soc10x { /* AFAICT need to make soc for 8245's uarts to be defined */ - linux,phandle = <4000>; #address-cells = <1>; #size-cells = <1>; #interrupt-cells = <2>; @@ -69,38 +64,35 @@ build with: "dtc -f -I dts -O dtb -o kuroboxHG.dtb -V 16 kuroboxHG.dts" fef00000 fef00000 00100000>; /* pci iack */ i2c@80003000 { - linux,phandle = <4300>; device_type = "i2c"; compatible = "fsl-i2c"; reg = <80003000 1000>; interrupts = <5 2>; - interrupt-parent = <4400>; + interrupt-parent = <&mpic>; }; serial@80004500 { - linux,phandle = <4511>; device_type = "serial"; compatible = "ns16550"; reg = <80004500 8>; clock-frequency = <7c044a8>; current-speed = <2580>; interrupts = <9 2>; - interrupt-parent = <4400>; + interrupt-parent = <&mpic>; }; serial@80004600 { - linux,phandle = <4512>; device_type = "serial"; compatible = "ns16550"; reg = <80004600 8>; clock-frequency = <7c044a8>; current-speed = <e100>; interrupts = <a 0>; - interrupt-parent = <4400>; + interrupt-parent = <&mpic>; }; - pic@80040000 { - linux,phandle = <4400>; + mpic: pic@80040000 { + interrupt-parent = <&mpic>; #interrupt-cells = <2>; #address-cells = <0>; device_type = "open-pic"; @@ -111,7 +103,6 @@ build with: "dtc -f -I dts -O dtb -o kuroboxHG.dtb -V 16 kuroboxHG.dts" }; pci@fec00000 { - linux,phandle = <4500>; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; @@ -122,24 +113,24 @@ build with: "dtc -f -I dts -O dtb -o kuroboxHG.dtb -V 16 kuroboxHG.dts" 02000000 0 80000000 80000000 0 70000000>; bus-range = <0 ff>; clock-frequency = <7f28155>; - interrupt-parent = <4400>; + interrupt-parent = <&mpic>; interrupt-map-mask = <f800 0 0 7>; interrupt-map = < /* IDSEL 11 - IRQ0 ETH */ - 5800 0 0 1 4400 0 1 - 5800 0 0 2 4400 1 1 - 5800 0 0 3 4400 2 1 - 5800 0 0 4 4400 3 1 + 5800 0 0 1 &mpic 0 1 + 5800 0 0 2 &mpic 1 1 + 5800 0 0 3 &mpic 2 1 + 5800 0 0 4 &mpic 3 1 /* IDSEL 12 - IRQ1 IDE0 */ - 6000 0 0 1 4400 1 1 - 6000 0 0 2 4400 2 1 - 6000 0 0 3 4400 3 1 - 6000 0 0 4 4400 0 1 + 6000 0 0 1 &mpic 1 1 + 6000 0 0 2 &mpic 2 1 + 6000 0 0 3 &mpic 3 1 + 6000 0 0 4 &mpic 0 1 /* IDSEL 14 - IRQ3 USB2.0 */ - 7000 0 0 1 4400 3 1 - 7000 0 0 2 4400 3 1 - 7000 0 0 3 4400 3 1 - 7000 0 0 4 4400 3 1 + 7000 0 0 1 &mpic 3 1 + 7000 0 0 2 &mpic 3 1 + 7000 0 0 3 &mpic 3 1 + 7000 0 0 4 &mpic 3 1 >; }; }; diff --git a/arch/powerpc/boot/dts/lite5200.dts b/arch/powerpc/boot/dts/lite5200.dts index e13ac6ef05a93d..d29308fe4c24d3 100644 --- a/arch/powerpc/boot/dts/lite5200.dts +++ b/arch/powerpc/boot/dts/lite5200.dts @@ -49,7 +49,7 @@ soc5200@f0000000 { model = "fsl,mpc5200"; compatible = "mpc5200"; - revision = "" // from bootloader + revision = ""; // from bootloader #interrupt-cells = <3>; device_type = "soc"; ranges = <0 f0000000 f0010000>; @@ -62,9 +62,8 @@ reg = <200 38>; }; - pic@500 { + mpc5200_pic: pic@500 { // 5200 interrupts are encoded into two levels; - linux,phandle = <500>; interrupt-controller; #interrupt-cells = <3>; device_type = "interrupt-controller"; @@ -79,7 +78,7 @@ cell-index = <0>; reg = <600 10>; interrupts = <1 9 0>; - interrupt-parent = <500>; + interrupt-parent = <&mpc5200_pic>; has-wdt; }; @@ -89,7 +88,7 @@ cell-index = <1>; reg = <610 10>; interrupts = <1 a 0>; - interrupt-parent = <500>; + interrupt-parent = <&mpc5200_pic>; }; gpt@620 { // General Purpose Timer @@ -98,7 +97,7 @@ cell-index = <2>; reg = <620 10>; interrupts = <1 b 0>; - interrupt-parent = <500>; + interrupt-parent = <&mpc5200_pic>; }; gpt@630 { // General Purpose Timer @@ -107,7 +106,7 @@ cell-index = <3>; reg = <630 10>; interrupts = <1 c 0>; - interrupt-parent = <500>; + interrupt-parent = <&mpc5200_pic>; }; gpt@640 { // General Purpose Timer @@ -116,7 +115,7 @@ cell-index = <4>; reg = <640 10>; interrupts = <1 d 0>; - interrupt-parent = <500>; + interrupt-parent = <&mpc5200_pic>; }; gpt@650 { // General Purpose Timer @@ -125,7 +124,7 @@ cell-index = <5>; reg = <650 10>; interrupts = <1 e 0>; - interrupt-parent = <500>; + interrupt-parent = <&mpc5200_pic>; }; gpt@660 { // General Purpose Timer @@ -134,7 +133,7 @@ cell-index = <6>; reg = <660 10>; interrupts = <1 f 0>; - interrupt-parent = <500>; + interrupt-parent = <&mpc5200_pic>; }; gpt@670 { // General Purpose Timer @@ -143,7 +142,7 @@ cell-index = <7>; reg = <670 10>; interrupts = <1 10 0>; - interrupt-parent = <500>; + interrupt-parent = <&mpc5200_pic>; }; rtc@800 { // Real time clock @@ -151,7 +150,7 @@ device_type = "rtc"; reg = <800 100>; interrupts = <1 5 0 1 6 0>; - interrupt-parent = <500>; + interrupt-parent = <&mpc5200_pic>; }; mscan@900 { @@ -159,7 +158,7 @@ compatible = "mpc5200-mscan"; cell-index = <0>; interrupts = <2 11 0>; - interrupt-parent = <500>; + interrupt-parent = <&mpc5200_pic>; reg = <900 80>; }; @@ -168,7 +167,7 @@ compatible = "mpc5200-mscan"; cell-index = <1>; interrupts = <2 12 0>; - interrupt-parent = <500>; + interrupt-parent = <&mpc5200_pic>; reg = <980 80>; }; @@ -176,14 +175,14 @@ compatible = "mpc5200-gpio"; reg = <b00 40>; interrupts = <1 7 0>; - interrupt-parent = <500>; + interrupt-parent = <&mpc5200_pic>; }; gpio-wkup@c00 { compatible = "mpc5200-gpio-wkup"; reg = <c00 40>; interrupts = <1 8 0 0 3 0>; - interrupt-parent = <500>; + interrupt-parent = <&mpc5200_pic>; }; pci@0d00 { @@ -194,13 +193,13 @@ compatible = "mpc5200-pci"; reg = <d00 100>; interrupt-map-mask = <f800 0 0 7>; - interrupt-map = <c000 0 0 1 500 0 0 3 - c000 0 0 2 500 0 0 3 - c000 0 0 3 500 0 0 3 - c000 0 0 4 500 0 0 3>; + interrupt-map = <c000 0 0 1 &mpc5200_pic 0 0 3 + c000 0 0 2 &mpc5200_pic 0 0 3 + c000 0 0 3 &mpc5200_pic 0 0 3 + c000 0 0 4 &mpc5200_pic 0 0 3>; clock-frequency = <0>; // From boot loader interrupts = <2 8 0 2 9 0 2 a 0>; - interrupt-parent = <500>; + interrupt-parent = <&mpc5200_pic>; bus-range = <0 0>; ranges = <42000000 0 80000000 80000000 0 20000000 02000000 0 a0000000 a0000000 0 10000000 @@ -212,7 +211,7 @@ compatible = "mpc5200-spi"; reg = <f00 20>; interrupts = <2 d 0 2 e 0>; - interrupt-parent = <500>; + interrupt-parent = <&mpc5200_pic>; }; usb@1000 { @@ -220,7 +219,7 @@ compatible = "mpc5200-ohci\0ohci-be"; reg = <1000 ff>; interrupts = <2 6 0>; - interrupt-parent = <500>; + interrupt-parent = <&mpc5200_pic>; }; bestcomm@1200 { @@ -231,7 +230,7 @@ 3 4 0 3 5 0 3 6 0 3 7 0 3 8 0 3 9 0 3 a 0 3 b 0 3 c 0 3 d 0 3 e 0 3 f 0>; - interrupt-parent = <500>; + interrupt-parent = <&mpc5200_pic>; }; xlb@1f00 { @@ -246,7 +245,7 @@ cell-index = <0>; reg = <2000 100>; interrupts = <2 1 0>; - interrupt-parent = <500>; + interrupt-parent = <&mpc5200_pic>; }; // PSC2 in ac97 mode example @@ -256,7 +255,7 @@ // cell-index = <1>; // reg = <2200 100>; // interrupts = <2 2 0>; - // interrupt-parent = <500>; + // interrupt-parent = <&mpc5200_pic>; //}; // PSC3 in CODEC mode example @@ -266,7 +265,7 @@ // cell-index = <2>; // reg = <2400 100>; // interrupts = <2 3 0>; - // interrupt-parent = <500>; + // interrupt-parent = <&mpc5200_pic>; //}; // PSC4 in uart mode example @@ -276,7 +275,7 @@ // cell-index = <3>; // reg = <2600 100>; // interrupts = <2 b 0>; - // interrupt-parent = <500>; + // interrupt-parent = <&mpc5200_pic>; //}; // PSC5 in uart mode example @@ -286,7 +285,7 @@ // cell-index = <4>; // reg = <2800 100>; // interrupts = <2 c 0>; - // interrupt-parent = <500>; + // interrupt-parent = <&mpc5200_pic>; //}; // PSC6 in spi mode example @@ -296,7 +295,7 @@ // cell-index = <5>; // reg = <2c00 100>; // interrupts = <2 4 0>; - // interrupt-parent = <500>; + // interrupt-parent = <&mpc5200_pic>; //}; ethernet@3000 { @@ -305,7 +304,7 @@ reg = <3000 800>; mac-address = [ 02 03 04 05 06 07 ]; // Bad! interrupts = <2 5 0>; - interrupt-parent = <500>; + interrupt-parent = <&mpc5200_pic>; }; ata@3a00 { @@ -313,7 +312,7 @@ compatible = "mpc5200-ata"; reg = <3a00 100>; interrupts = <2 7 0>; - interrupt-parent = <500>; + interrupt-parent = <&mpc5200_pic>; }; i2c@3d00 { @@ -322,7 +321,7 @@ cell-index = <0>; reg = <3d00 40>; interrupts = <2 f 0>; - interrupt-parent = <500>; + interrupt-parent = <&mpc5200_pic>; fsl5200-clocking; }; @@ -332,7 +331,7 @@ cell-index = <1>; reg = <3d40 40>; interrupts = <2 10 0>; - interrupt-parent = <500>; + interrupt-parent = <&mpc5200_pic>; fsl5200-clocking; }; sram@8000 { diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts index 00211b39a342bd..f242531f04514a 100644 --- a/arch/powerpc/boot/dts/lite5200b.dts +++ b/arch/powerpc/boot/dts/lite5200b.dts @@ -62,9 +62,8 @@ reg = <200 38>; }; - pic@500 { + mpc5200_pic: pic@500 { // 5200 interrupts are encoded into two levels; - linux,phandle = <500>; interrupt-controller; #interrupt-cells = <3>; device_type = "interrupt-controller"; @@ -79,7 +78,7 @@ cell-index = <0>; reg = <600 10>; interrupts = <1 9 0>; - interrupt-parent = <500>; + interrupt-parent = <&mpc5200_pic>; has-wdt; }; @@ -89,7 +88,7 @@ cell-index = <1>; reg = <610 10>; interrupts = <1 a 0>; - interrupt-parent = <500>; + interrupt-parent = <&mpc5200_pic>; }; gpt@620 { // General Purpose Timer @@ -98,7 +97,7 @@ cell-index = <2>; reg = <620 10>; interrupts = <1 b 0>; - interrupt-parent = <500>; + interrupt-parent = <&mpc5200_pic>; }; gpt@630 { // General Purpose Timer @@ -107,7 +106,7 @@ cell-index = <3>; reg = <630 10>; interrupts = <1 c 0>; - interrupt-parent = <500>; + interrupt-parent = <&mpc5200_pic>; }; gpt@640 { // General Purpose Timer @@ -116,7 +115,7 @@ cell-index = <4>; reg = <640 10>; interrupts = <1 d 0>; - interrupt-parent = <500>; + interrupt-parent = <&mpc5200_pic>; }; gpt@650 { // General Purpose Timer @@ -125,7 +124,7 @@ cell-index = <5>; reg = <650 10>; interrupts = <1 e 0>; - interrupt-parent = <500>; + interrupt-parent = <&mpc5200_pic>; }; gpt@660 { // General Purpose Timer @@ -134,7 +133,7 @@ cell-index = <6>; reg = <660 10>; interrupts = <1 f 0>; - interrupt-parent = <500>; + interrupt-parent = <&mpc5200_pic>; }; gpt@670 { // General Purpose Timer @@ -143,7 +142,7 @@ cell-index = <7>; reg = <670 10>; interrupts = <1 10 0>; - interrupt-parent = <500>; + interrupt-parent = <&mpc5200_pic>; }; rtc@800 { // Real time clock @@ -151,7 +150,7 @@ device_type = "rtc"; reg = <800 100>; interrupts = <1 5 0 1 6 0>; - interrupt-parent = <500>; + interrupt-parent = <&mpc5200_pic>; }; mscan@900 { @@ -159,7 +158,7 @@ compatible = "mpc5200b-mscan\0mpc5200-mscan"; cell-index = <0>; interrupts = <2 11 0>; - interrupt-parent = <500>; + interrupt-parent = <&mpc5200_pic>; reg = <900 80>; }; @@ -168,7 +167,7 @@ compatible = "mpc5200b-mscan\0mpc5200-mscan"; cell-index = <1>; interrupts = <2 12 0>; - interrupt-parent = <500>; + interrupt-parent = <&mpc5200_pic>; reg = <980 80>; }; @@ -176,14 +175,14 @@ compatible = "mpc5200b-gpio\0mpc5200-gpio"; reg = <b00 40>; interrupts = <1 7 0>; - interrupt-parent = <500>; + interrupt-parent = <&mpc5200_pic>; }; gpio-wkup@c00 { compatible = "mpc5200b-gpio-wkup\0mpc5200-gpio-wkup"; reg = <c00 40>; interrupts = <1 8 0 0 3 0>; - interrupt-parent = <500>; + interrupt-parent = <&mpc5200_pic>; }; pci@0d00 { @@ -194,18 +193,18 @@ compatible = "mpc5200b-pci\0mpc5200-pci"; reg = <d00 100>; interrupt-map-mask = <f800 0 0 7>; - interrupt-map = <c000 0 0 1 500 0 0 3 // 1st slot - c000 0 0 2 500 1 1 3 - c000 0 0 3 500 1 2 3 - c000 0 0 4 500 1 3 3 - - c800 0 0 1 500 1 1 3 // 2nd slot - c800 0 0 2 500 1 2 3 - c800 0 0 3 500 1 3 3 - c800 0 0 4 500 0 0 3>; + interrupt-map = <c000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot + c000 0 0 2 &mpc5200_pic 1 1 3 + c000 0 0 3 &mpc5200_pic 1 2 3 + c000 0 0 4 &mpc5200_pic 1 3 3 + + c800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot + c800 0 0 2 &mpc5200_pic 1 2 3 + c800 0 0 3 &mpc5200_pic 1 3 3 + c800 0 0 4 &mpc5200_pic 0 0 3>; clock-frequency = <0>; // From boot loader interrupts = <2 8 0 2 9 0 2 a 0>; - interrupt-parent = <500>; + interrupt-parent = <&mpc5200_pic>; bus-range = <0 0>; ranges = <42000000 0 80000000 80000000 0 20000000 02000000 0 a0000000 a0000000 0 10000000 @@ -217,7 +216,7 @@ compatible = "mpc5200b-spi\0mpc5200-spi"; reg = <f00 20>; interrupts = <2 d 0 2 e 0>; - interrupt-parent = <500>; + interrupt-parent = <&mpc5200_pic>; }; usb@1000 { @@ -225,7 +224,7 @@ compatible = "mpc5200b-ohci\0mpc5200-ohci\0ohci-be"; reg = <1000 ff>; interrupts = <2 6 0>; - interrupt-parent = <500>; + interrupt-parent = <&mpc5200_pic>; }; bestcomm@1200 { @@ -236,7 +235,7 @@ 3 4 0 3 5 0 3 6 0 3 7 0 3 8 0 3 9 0 3 a 0 3 b 0 3 c 0 3 d 0 3 e 0 3 f 0>; - interrupt-parent = <500>; + interrupt-parent = <&mpc5200_pic>; }; xlb@1f00 { @@ -251,7 +250,7 @@ cell-index = <0>; reg = <2000 100>; interrupts = <2 1 0>; - interrupt-parent = <500>; + interrupt-parent = <&mpc5200_pic>; }; // PSC2 in ac97 mode example @@ -261,7 +260,7 @@ // cell-index = <1>; // reg = <2200 100>; // interrupts = <2 2 0>; - // interrupt-parent = <500>; + // interrupt-parent = <&mpc5200_pic>; //}; // PSC3 in CODEC mode example @@ -271,7 +270,7 @@ // cell-index = <2>; // reg = <2400 100>; // interrupts = <2 3 0>; - // interrupt-parent = <500>; + // interrupt-parent = <&mpc5200_pic>; //}; // PSC4 in uart mode example @@ -281,7 +280,7 @@ // cell-index = <3>; // reg = <2600 100>; // interrupts = <2 b 0>; - // interrupt-parent = <500>; + // interrupt-parent = <&mpc5200_pic>; //}; // PSC5 in uart mode example @@ -291,7 +290,7 @@ // cell-index = <4>; // reg = <2800 100>; // interrupts = <2 c 0>; - // interrupt-parent = <500>; + // interrupt-parent = <&mpc5200_pic>; //}; // PSC6 in spi mode example @@ -301,7 +300,7 @@ // cell-index = <5>; // reg = <2c00 100>; // interrupts = <2 4 0>; - // interrupt-parent = <500>; + // interrupt-parent = <&mpc5200_pic>; //}; ethernet@3000 { @@ -310,7 +309,7 @@ reg = <3000 800>; mac-address = [ 02 03 04 05 06 07 ]; // Bad! interrupts = <2 5 0>; - interrupt-parent = <500>; + interrupt-parent = <&mpc5200_pic>; }; ata@3a00 { @@ -318,7 +317,7 @@ compatible = "mpc5200b-ata\0mpc5200-ata"; reg = <3a00 100>; interrupts = <2 7 0>; - interrupt-parent = <500>; + interrupt-parent = <&mpc5200_pic>; }; i2c@3d00 { @@ -327,7 +326,7 @@ cell-index = <0>; reg = <3d00 40>; interrupts = <2 f 0>; - interrupt-parent = <500>; + interrupt-parent = <&mpc5200_pic>; fsl5200-clocking; }; @@ -337,7 +336,7 @@ cell-index = <1>; reg = <3d40 40>; interrupts = <2 10 0>; - interrupt-parent = <500>; + interrupt-parent = <&mpc5200_pic>; fsl5200-clocking; }; sram@8000 { diff --git a/arch/powerpc/boot/dts/mpc7448hpc2.dts b/arch/powerpc/boot/dts/mpc7448hpc2.dts index 6fa3754f293a96..765c306ecf8034 100644 --- a/arch/powerpc/boot/dts/mpc7448hpc2.dts +++ b/arch/powerpc/boot/dts/mpc7448hpc2.dts @@ -16,12 +16,10 @@ compatible = "mpc74xx"; #address-cells = <1>; #size-cells = <1>; - linux,phandle = <100>; cpus { #address-cells = <1>; #size-cells =<0>; - linux,phandle = <200>; PowerPC,7448@0 { device_type = "cpu"; @@ -34,13 +32,11 @@ clock-frequency = <0>; // From U-Boot bus-frequency = <0>; // From U-Boot 32-bit; - linux,phandle = <201>; }; }; memory { device_type = "memory"; - linux,phandle = <300>; reg = <00000000 20000000 // DDR2 512M at 0 >; }; @@ -55,7 +51,7 @@ bus-frequency = <0>; i2c@7000 { - interrupt-parent = <7400>; + interrupt-parent = <&mpic>; interrupts = <E 0>; reg = <7000 400>; device_type = "i2c"; @@ -66,18 +62,16 @@ device_type = "mdio"; compatible = "tsi-ethernet"; - ethernet-phy@6000 { - linux,phandle = <6000>; - interrupt-parent = <7400>; + phy8: ethernet-phy@6000 { + interrupt-parent = <&mpic>; interrupts = <2 1>; reg = <6000 50>; phy-id = <8>; device_type = "ethernet-phy"; }; - ethernet-phy@6400 { - linux,phandle = <6400>; - interrupt-parent = <7400>; + phy9: ethernet-phy@6400 { + interrupt-parent = <&mpic>; interrupts = <2 1>; reg = <6000 50>; phy-id = <9>; @@ -94,8 +88,8 @@ reg = <6000 200>; address = [ 00 06 D2 00 00 01 ]; interrupts = <10 2>; - interrupt-parent = <7400>; - phy-handle = <6000>; + interrupt-parent = <&mpic>; + phy-handle = <&phy8>; }; ethernet@6600 { @@ -107,8 +101,8 @@ reg = <6400 200>; address = [ 00 06 D2 00 00 02 ]; interrupts = <11 2>; - interrupt-parent = <7400>; - phy-handle = <6400>; + interrupt-parent = <&mpic>; + phy-handle = <&phy9>; }; serial@7808 { @@ -117,7 +111,7 @@ reg = <7808 200>; clock-frequency = <3f6b5a00>; interrupts = <c 0>; - interrupt-parent = <7400>; + interrupt-parent = <&mpic>; }; serial@7c08 { @@ -126,11 +120,10 @@ reg = <7c08 200>; clock-frequency = <3f6b5a00>; interrupts = <d 0>; - interrupt-parent = <7400>; + interrupt-parent = <&mpic>; }; - pic@7400 { - linux,phandle = <7400>; + mpic: pic@7400 { clock-frequency = <0>; interrupt-controller; #address-cells = <0>; @@ -144,7 +137,6 @@ pci@1000 { compatible = "tsi10x"; device_type = "pci"; - linux,phandle = <1000>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; @@ -153,37 +145,37 @@ ranges = <02000000 0 e0000000 e0000000 0 1A000000 01000000 0 00000000 fa000000 0 00010000>; clock-frequency = <7f28154>; - interrupt-parent = <7400>; + interrupt-parent = <&mpic>; interrupts = <17 2>; interrupt-map-mask = <f800 0 0 7>; interrupt-map = < /* IDSEL 0x11 */ - 0800 0 0 1 1180 24 0 - 0800 0 0 2 1180 25 0 - 0800 0 0 3 1180 26 0 - 0800 0 0 4 1180 27 0 + 0800 0 0 1 &RT0 24 0 + 0800 0 0 2 &RT0 25 0 + 0800 0 0 3 &RT0 26 0 + 0800 0 0 4 &RT0 27 0 /* IDSEL 0x12 */ - 1000 0 0 1 1180 25 0 - 1000 0 0 2 1180 26 0 - 1000 0 0 3 1180 27 0 - 1000 0 0 4 1180 24 0 + 1000 0 0 1 &RT0 25 0 + 1000 0 0 2 &RT0 26 0 + 1000 0 0 3 &RT0 27 0 + 1000 0 0 4 &RT0 24 0 /* IDSEL 0x13 */ - 1800 0 0 1 1180 26 0 - 1800 0 0 2 1180 27 0 - 1800 0 0 3 1180 24 0 - 1800 0 0 4 1180 25 0 + 1800 0 0 1 &RT0 26 0 + 1800 0 0 2 &RT0 27 0 + 1800 0 0 3 &RT0 24 0 + 1800 0 0 4 &RT0 25 0 /* IDSEL 0x14 */ - 2000 0 0 1 1180 27 0 - 2000 0 0 2 1180 24 0 - 2000 0 0 3 1180 25 0 - 2000 0 0 4 1180 26 0 + 2000 0 0 1 &RT0 27 0 + 2000 0 0 2 &RT0 24 0 + 2000 0 0 3 &RT0 25 0 + 2000 0 0 4 &RT0 26 0 >; - router@1180 { - linux,phandle = <1180>; + + RT0: router@1180 { clock-frequency = <0>; interrupt-controller; device_type = "pic-router"; @@ -192,7 +184,7 @@ built-in; big-endian; interrupts = <17 2>; - interrupt-parent = <7400>; + interrupt-parent = <&mpic>; }; }; }; diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts index f261d647ac856a..d91e81c009f518 100644 --- a/arch/powerpc/boot/dts/mpc8540ads.dts +++ b/arch/powerpc/boot/dts/mpc8540ads.dts @@ -48,6 +48,22 @@ reg = <e0000000 00100000>; // CCSRBAR 1M bus-frequency = <0>; + memory-controller@2000 { + compatible = "fsl,8540-memory-controller"; + reg = <2000 1000>; + interrupt-parent = <&mpic>; + interrupts = <2 2>; + }; + + l2-cache-controller@20000 { + compatible = "fsl,8540-l2-cache-controller"; + reg = <20000 1000>; + cache-line-size = <20>; // 32 bytes + cache-size = <40000>; // L2, 256K + interrupt-parent = <&mpic>; + interrupts = <0 2>; + }; + i2c@3000 { device_type = "i2c"; compatible = "fsl-i2c"; diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts index 5fdcb69554f285..4f2c3af2e052c9 100644 --- a/arch/powerpc/boot/dts/mpc8541cds.dts +++ b/arch/powerpc/boot/dts/mpc8541cds.dts @@ -48,6 +48,22 @@ reg = <e0000000 00100000>; // CCSRBAR 1M bus-frequency = <0>; + memory-controller@2000 { + compatible = "fsl,8541-memory-controller"; + reg = <2000 1000>; + interrupt-parent = <&mpic>; + interrupts = <2 2>; + }; + + l2-cache-controller@20000 { + compatible = "fsl,8541-l2-cache-controller"; + reg = <20000 1000>; + cache-line-size = <20>; // 32 bytes + cache-size = <40000>; // L2, 256K + interrupt-parent = <&mpic>; + interrupts = <0 2>; + }; + i2c@3000 { device_type = "i2c"; compatible = "fsl-i2c"; diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/mpc8544ds.dts index 6b084605bb4bb6..3033599e74e878 100644 --- a/arch/powerpc/boot/dts/mpc8544ds.dts +++ b/arch/powerpc/boot/dts/mpc8544ds.dts @@ -48,6 +48,22 @@ reg = <e0000000 00100000>; // CCSRBAR 1M bus-frequency = <0>; // Filled out by uboot. + memory-controller@2000 { + compatible = "fsl,8544-memory-controller"; + reg = <2000 1000>; + interrupt-parent = <&mpic>; + interrupts = <2 2>; + }; + + l2-cache-controller@20000 { + compatible = "fsl,8544-l2-cache-controller"; + reg = <20000 1000>; + cache-line-size = <20>; // 32 bytes + cache-size = <40000>; // L2, 256K + interrupt-parent = <&mpic>; + interrupts = <0 2>; + }; + i2c@3000 { device_type = "i2c"; compatible = "fsl-i2c"; diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts index b2b2200d042530..ad96381033c09e 100644 --- a/arch/powerpc/boot/dts/mpc8548cds.dts +++ b/arch/powerpc/boot/dts/mpc8548cds.dts @@ -48,6 +48,22 @@ reg = <e0000000 00100000>; // CCSRBAR 1M bus-frequency = <0>; + memory-controller@2000 { + compatible = "fsl,8548-memory-controller"; + reg = <2000 1000>; + interrupt-parent = <&mpic>; + interrupts = <2 2>; + }; + + l2-cache-controller@20000 { + compatible = "fsl,8548-l2-cache-controller"; + reg = <20000 1000>; + cache-line-size = <20>; // 32 bytes + cache-size = <80000>; // L2, 512K + interrupt-parent = <&mpic>; + interrupts = <0 2>; + }; + i2c@3000 { device_type = "i2c"; compatible = "fsl-i2c"; diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts index 68a4795720dcb6..951ed92f1154d6 100644 --- a/arch/powerpc/boot/dts/mpc8555cds.dts +++ b/arch/powerpc/boot/dts/mpc8555cds.dts @@ -48,6 +48,22 @@ reg = <e0000000 00100000>; // CCSRBAR 1M bus-frequency = <0>; + memory-controller@2000 { + compatible = "fsl,8555-memory-controller"; + reg = <2000 1000>; + interrupt-parent = <&mpic>; + interrupts = <2 2>; + }; + + l2-cache-controller@20000 { + compatible = "fsl,8555-l2-cache-controller"; + reg = <20000 1000>; + cache-line-size = <20>; // 32 bytes + cache-size = <40000>; // L2, 256K + interrupt-parent = <&mpic>; + interrupts = <0 2>; + }; + i2c@3000 { device_type = "i2c"; compatible = "fsl-i2c"; diff --git a/arch/powerpc/boot/dts/mpc8560ads.dts b/arch/powerpc/boot/dts/mpc8560ads.dts index 1f2afe9291d216..80682152b0cf23 100644 --- a/arch/powerpc/boot/dts/mpc8560ads.dts +++ b/arch/powerpc/boot/dts/mpc8560ads.dts @@ -48,6 +48,22 @@ reg = <e0000000 00000200>; bus-frequency = <13ab6680>; + memory-controller@2000 { + compatible = "fsl,8540-memory-controller"; + reg = <2000 1000>; + interrupt-parent = <&mpic>; + interrupts = <2 2>; + }; + + l2-cache-controller@20000 { + compatible = "fsl,8540-l2-cache-controller"; + reg = <20000 1000>; + cache-line-size = <20>; // 32 bytes + cache-size = <40000>; // L2, 256K + interrupt-parent = <&mpic>; + interrupts = <0 2>; + }; + mdio@24520 { device_type = "mdio"; compatible = "gianfar"; @@ -110,7 +126,7 @@ #address-cells = <3>; compatible = "85xx"; device_type = "pci"; - reg = <8000 400>; + reg = <8000 1000>; clock-frequency = <3f940aa>; interrupt-map-mask = <f800 0 0 7>; interrupt-map = < diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts index 948a3b61bd4a2a..a123ec9456bc0b 100644 --- a/arch/powerpc/boot/dts/mpc8568mds.dts +++ b/arch/powerpc/boot/dts/mpc8568mds.dts @@ -57,6 +57,22 @@ reg = <e0000000 00100000>; bus-frequency = <0>; + memory-controller@2000 { + compatible = "fsl,8568-memory-controller"; + reg = <2000 1000>; + interrupt-parent = <&mpic>; + interrupts = <2 2>; + }; + + l2-cache-controller@20000 { + compatible = "fsl,8568-l2-cache-controller"; + reg = <20000 1000>; + cache-line-size = <20>; // 32 bytes + cache-size = <80000>; // L2, 512K + interrupt-parent = <&mpic>; + interrupts = <0 2>; + }; + i2c@3000 { device_type = "i2c"; compatible = "fsl-i2c"; diff --git a/arch/powerpc/boot/flatdevtree.c b/arch/powerpc/boot/flatdevtree.c index d00fbd92a45858..b732644788db79 100644 --- a/arch/powerpc/boot/flatdevtree.c +++ b/arch/powerpc/boot/flatdevtree.c @@ -891,28 +891,27 @@ int ft_set_prop(struct ft_cxt *cxt, const void *phandle, const char *propname, struct ft_atom atom; void *node; char *p, *next; - int nextra, depth; + int nextra; node = ft_node_ph2node(cxt, phandle); if (node == NULL) return -1; - depth = 0; - p = node; + next = ft_next(cxt, node, &atom); + if (atom.tag != OF_DT_BEGIN_NODE) + /* phandle didn't point to a node */ + return -1; + p = next; while ((next = ft_next(cxt, p, &atom)) != NULL) { switch (atom.tag) { - case OF_DT_BEGIN_NODE: - ++depth; - break; + case OF_DT_BEGIN_NODE: /* properties must go before subnodes */ case OF_DT_END_NODE: - if (--depth > 0) - break; /* haven't found the property, insert here */ cxt->p = p; return ft_prop(cxt, propname, buf, buflen); case OF_DT_PROP: - if ((depth != 1) || strcmp(atom.name, propname)) + if (strcmp(atom.name, propname)) break; /* found an existing property, overwrite it */ nextra = _ALIGN(buflen, 4) - _ALIGN(atom.size, 4); diff --git a/arch/powerpc/configs/cell_defconfig b/arch/powerpc/configs/cell_defconfig index 6061e5f7696e56..02c428affc8f76 100644 --- a/arch/powerpc/configs/cell_defconfig +++ b/arch/powerpc/configs/cell_defconfig @@ -163,7 +163,6 @@ CONFIG_SPU_FS=m CONFIG_SPU_BASE=y CONFIG_CBE_RAS=y CONFIG_CBE_THERM=m -CONFIG_CBE_CPUFREQ=m CONFIG_PPC_NATIVE=y CONFIG_UDBG_RTAS_CONSOLE=y CONFIG_PPC_UDBG_BEAT=y @@ -172,24 +171,12 @@ CONFIG_PPC_RTAS=y # CONFIG_RTAS_ERROR_LOGGING is not set CONFIG_RTAS_PROC=y CONFIG_RTAS_FLASH=y -CONFIG_PPC_PMI=m +# CONFIG_PPC_PMI is not set CONFIG_MMIO_NVRAM=y # CONFIG_PPC_MPC106 is not set # CONFIG_PPC_970_NAP is not set CONFIG_PPC_INDIRECT_IO=y CONFIG_GENERIC_IOMAP=y -CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_TABLE=y -CONFIG_CPU_FREQ_DEBUG=y -CONFIG_CPU_FREQ_STAT=y -# CONFIG_CPU_FREQ_STAT_DETAILS is not set -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -CONFIG_CPU_FREQ_GOV_POWERSAVE=y -CONFIG_CPU_FREQ_GOV_USERSPACE=y -CONFIG_CPU_FREQ_GOV_ONDEMAND=y -CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y # CONFIG_CPU_FREQ_PMAC64 is not set # CONFIG_WANT_EARLY_SERIAL is not set CONFIG_MPIC=y diff --git a/arch/powerpc/configs/iseries_defconfig b/arch/powerpc/configs/iseries_defconfig index 5fc87448704c37..af25118c8f24e1 100644 --- a/arch/powerpc/configs/iseries_defconfig +++ b/arch/powerpc/configs/iseries_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.20-rc5 -# Mon Jan 22 22:16:44 2007 +# Linux kernel version: 2.6.22-rc1 +# Mon May 14 14:27:46 2007 # CONFIG_PPC64=y CONFIG_64BIT=y @@ -40,6 +40,7 @@ CONFIG_PPC_FPU=y # CONFIG_PPC_OF_PLATFORM_PCI is not set # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y +# CONFIG_PPC_MM_SLICES is not set CONFIG_VIRT_CPU_ACCOUNTING=y CONFIG_SMP=y CONFIG_NR_CPUS=32 @@ -60,6 +61,7 @@ CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set @@ -68,9 +70,11 @@ CONFIG_AUDIT=y CONFIG_AUDITSYSCALL=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=17 # CONFIG_CPUSETS is not set CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y @@ -85,14 +89,19 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set # # Loadable module support @@ -131,15 +140,30 @@ CONFIG_PPC_MULTIPLATFORM=y # CONFIG_EMBEDDED6xx is not set # CONFIG_APUS is not set # CONFIG_PPC_PSERIES is not set +CONFIG_LPARCFG=y CONFIG_PPC_ISERIES=y + +# +# iSeries device drivers +# +CONFIG_VIODASD=y +CONFIG_VIOCD=m +CONFIG_VIOTAPE=m +CONFIG_VIOPATH=y # CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_MPC5200 is not set # CONFIG_PPC_PMAC is not set # CONFIG_PPC_MAPLE is not set # CONFIG_PPC_PASEMI is not set +# CONFIG_PPC_CELLEB is not set +# CONFIG_PPC_PS3 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PPC_IBM_CELL_BLADE is not set -# CONFIG_PPC_PS3 is not set +# CONFIG_PQ2ADS is not set +# CONFIG_MPIC is not set +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set # CONFIG_U3_DART is not set # CONFIG_PPC_RTAS is not set # CONFIG_MMIO_NVRAM is not set @@ -149,8 +173,7 @@ CONFIG_IBMVIO=y CONFIG_PPC_INDIRECT_IO=y CONFIG_GENERIC_IOMAP=y # CONFIG_CPU_FREQ is not set -# CONFIG_WANT_EARLY_SERIAL is not set -# CONFIG_MPIC is not set +# CONFIG_CPM2 is not set # # Kernel options @@ -172,7 +195,6 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set CONFIG_IRQ_ALL_CPUS=y -CONFIG_LPARCFG=y # CONFIG_NUMA is not set CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_FLATMEM_ENABLE=y @@ -187,34 +209,34 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_RESOURCES_64BIT=y +CONFIG_ZONE_DMA_FLAG=1 +# CONFIG_PPC_HAS_HASH_64K is not set # CONFIG_PPC_64K_PAGES is not set # CONFIG_SCHED_SMT is not set CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set CONFIG_SECCOMP=y +# CONFIG_WANT_DEVICE_TREE is not set CONFIG_ISA_DMA_API=y # # Bus options # +CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y -# CONFIG_MPIC_WEIRD is not set -# CONFIG_PPC_I8259 is not set # CONFIG_PPC_INDIRECT_PCI is not set CONFIG_PCI=y CONFIG_PCI_DOMAINS=y # CONFIG_PCIEPORTBUS is not set +CONFIG_ARCH_SUPPORTS_MSI=y +# CONFIG_PCI_MSI is not set # CONFIG_PCI_DEBUG is not set # # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# # CONFIG_HOTPLUG_PCI is not set CONFIG_KERNEL_START=0xc000000000000000 @@ -226,14 +248,15 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=m CONFIG_XFRM_SUB_POLICY=y +# CONFIG_XFRM_MIGRATE is not set CONFIG_NET_KEY=m +# CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set @@ -275,8 +298,6 @@ CONFIG_NETFILTER=y # # CONFIG_NETFILTER_NETLINK is not set CONFIG_NF_CONNTRACK_ENABLED=m -CONFIG_NF_CONNTRACK_SUPPORT=y -# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set CONFIG_NF_CONNTRACK=m # CONFIG_NF_CT_ACCT is not set CONFIG_NF_CONNTRACK_MARK=y @@ -288,6 +309,7 @@ CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_IRC=m # CONFIG_NF_CONNTRACK_NETBIOS_NS is not set # CONFIG_NF_CONNTRACK_PPTP is not set +# CONFIG_NF_CONNTRACK_SANE is not set # CONFIG_NF_CONNTRACK_SIP is not set CONFIG_NF_CONNTRACK_TFTP=m CONFIG_NETFILTER_XTABLES=m @@ -298,7 +320,9 @@ CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set # CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set +# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set CONFIG_NETFILTER_XT_MATCH_COMMENT=m +# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m # CONFIG_NETFILTER_XT_MATCH_DCCP is not set @@ -340,7 +364,6 @@ CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m CONFIG_NF_NAT=m CONFIG_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m @@ -373,7 +396,12 @@ CONFIG_IP_NF_ARP_MANGLE=m # # SCTP Configuration (EXPERIMENTAL) # -# CONFIG_IP_SCTP is not set +CONFIG_IP_SCTP=m +# CONFIG_SCTP_DBG_MSG is not set +# CONFIG_SCTP_DBG_OBJCNT is not set +# CONFIG_SCTP_HMAC_NONE is not set +# CONFIG_SCTP_HMAC_SHA1 is not set +CONFIG_SCTP_HMAC_MD5=y # # TIPC Configuration (EXPERIMENTAL) @@ -405,7 +433,16 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set # # Device Drivers @@ -418,16 +455,13 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m # CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # # Connector - unified userspace <-> kernelspace linker # # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# # CONFIG_MTD is not set # @@ -438,6 +472,7 @@ CONFIG_FW_LOADER=m # # Plug and Play support # +# CONFIG_PNPACPI is not set # # Block devices @@ -456,15 +491,16 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=65536 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # # Misc devices # +# CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_BLINK is not set # # ATA/ATAPI/MFM/RLL support @@ -498,6 +534,7 @@ CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -544,11 +581,8 @@ CONFIG_SCSI_IBMVSCSI=m # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_ESP_CORE is not set # CONFIG_SCSI_SRP is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# # CONFIG_ATA is not set # @@ -570,6 +604,7 @@ CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m # CONFIG_DM_MULTIPATH is not set +# CONFIG_DM_DELAY is not set # # Fusion MPT device support @@ -582,18 +617,14 @@ CONFIG_DM_ZERO=m # # IEEE 1394 (FireWire) support # +# CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # # I2O device support # # CONFIG_I2O is not set - -# -# Macintosh device drivers -# -# CONFIG_MAC_EMUMOUSEBTN is not set -# CONFIG_WINDFARM is not set +# CONFIG_MACINTOSH_DRIVERS is not set # # Network device support @@ -608,10 +639,6 @@ CONFIG_TUN=m # ARCnet devices # # CONFIG_ARCNET is not set - -# -# PHY device support -# # CONFIG_PHYLIB is not set # @@ -648,10 +675,8 @@ CONFIG_E100=y # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set # CONFIG_VIA_RHINE is not set - -# -# Ethernet (1000 Mbit) -# +# CONFIG_SC92031 is not set +CONFIG_NETDEV_1000=y CONFIG_ACENIC=m # CONFIG_ACENIC_OMIT_TIGON_I is not set # CONFIG_DL2K is not set @@ -670,15 +695,17 @@ CONFIG_E1000=m # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set - -# -# Ethernet (10000 Mbit) -# +# CONFIG_ATL1 is not set +CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set +# CONFIG_PASEMI_MAC is not set +# CONFIG_MLX4_CORE is not set +CONFIG_MLX4_DEBUG=y # # Token Ring devices @@ -689,13 +716,10 @@ CONFIG_IBMOL=y # CONFIG_TMS380TR is not set # -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set CONFIG_ISERIES_VETH=y # CONFIG_FDDI is not set @@ -715,7 +739,6 @@ CONFIG_SLHC=m # CONFIG_SHAPER is not set CONFIG_NETCONSOLE=y CONFIG_NETPOLL=y -CONFIG_NETPOLL_RX=y CONFIG_NETPOLL_TRAP=y CONFIG_NET_POLL_CONTROLLER=y @@ -753,6 +776,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -765,6 +789,10 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # # Character devices # +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -781,20 +809,17 @@ CONFIG_SERIAL_ICOM=m CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +CONFIG_HVC_DRIVER=y +CONFIG_HVC_ISERIES=y # # IPMI # # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# # CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_AGP is not set @@ -807,10 +832,7 @@ CONFIG_MAX_RAW_DEVS=256 # TPM devices # # CONFIG_TCG_TPM is not set - -# -# I2C support -# +CONFIG_DEVPORT=y # CONFIG_I2C is not set # @@ -823,30 +845,39 @@ CONFIG_MAX_RAW_DEVS=256 # Dallas's 1-wire bus # # CONFIG_W1 is not set +# CONFIG_HWMON is not set # -# Hardware Monitoring support +# Multifunction device drivers # -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set +# CONFIG_MFD_SM501 is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set # -# Digital Video Broadcasting Devices +# Graphics support # -# CONFIG_DVB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Graphics support +# Display device support # -CONFIG_FIRMWARE_EDID=y +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set # CONFIG_FB is not set # CONFIG_FB_IBM_GXT4500 is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Console display driver support +# +CONFIG_VGA_CONSOLE=y +# CONFIG_VGACON_SOFT_SCROLLBACK is not set +CONFIG_DUMMY_CONSOLE=y # # Sound @@ -874,10 +905,6 @@ CONFIG_USB_ARCH_HAS_EHCI=y # USB Gadget Support # # CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# # CONFIG_MMC is not set # @@ -921,10 +948,6 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# Virtualization -# - -# # File systems # CONFIG_EXT2_FS=y @@ -979,7 +1002,6 @@ CONFIG_GENERIC_ACL=y CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y -CONFIG_ZISOFS_FS=y CONFIG_UDF_FS=m CONFIG_UDF_NLS=y @@ -1045,6 +1067,7 @@ CONFIG_NFS_ACL_SUPPORT=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=y CONFIG_RPCSEC_GSS_SPKM3=m # CONFIG_SMB_FS is not set @@ -1114,18 +1137,9 @@ CONFIG_NLS_ISO8859_1=y # Distributed Lock Manager # CONFIG_DLM=m -CONFIG_DLM_TCP=y -# CONFIG_DLM_SCTP is not set # CONFIG_DLM_DEBUG is not set - -# -# iSeries device drivers -# -CONFIG_VIOCONS=y -CONFIG_VIODASD=y -CONFIG_VIOCD=m -CONFIG_VIOTAPE=m -CONFIG_VIOPATH=y +# CONFIG_UCC_SLOW is not set +# CONFIG_UCC_FAST is not set # # Library routines @@ -1133,6 +1147,7 @@ CONFIG_VIOPATH=y CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y @@ -1142,7 +1157,9 @@ CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m CONFIG_PLIST=y -CONFIG_IOMAP_COPY=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y # # Instrumentation Support @@ -1160,15 +1177,15 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y -CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_RWSEMS is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -1178,8 +1195,10 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_LIST is not set # CONFIG_FORCED_INLINING is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_STACK_USAGE=y +# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set CONFIG_IRQSTACKS=y # CONFIG_BOOTX_TEXT is not set @@ -1212,8 +1231,11 @@ CONFIG_CRYPTO_TGR192=m # CONFIG_CRYPTO_GF128MUL is not set CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_TWOFISH_COMMON=m @@ -1228,6 +1250,7 @@ CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m +# CONFIG_CRYPTO_CAMELLIA is not set CONFIG_CRYPTO_TEST=m # diff --git a/arch/powerpc/configs/pasemi_defconfig b/arch/powerpc/configs/pasemi_defconfig index 97a57e996663ab..0507c8f7bfbc92 100644 --- a/arch/powerpc/configs/pasemi_defconfig +++ b/arch/powerpc/configs/pasemi_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.20-rc6 -# Thu Feb 1 22:54:15 2007 +# Linux kernel version: 2.6.21 +# Mon May 14 12:55:04 2007 # CONFIG_PPC64=y CONFIG_64BIT=y @@ -23,7 +23,7 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_PPC_UDBG_16550=y -CONFIG_GENERIC_TBSYNC=y +# CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y # CONFIG_DEFAULT_UIMAGE is not set @@ -39,6 +39,7 @@ CONFIG_PPC_FPU=y # CONFIG_PPC_OF_PLATFORM_PCI is not set CONFIG_ALTIVEC=y CONFIG_PPC_STD_MMU=y +CONFIG_PPC_MM_SLICES=y # CONFIG_VIRT_CPU_ACCOUNTING is not set CONFIG_SMP=y CONFIG_NR_CPUS=2 @@ -59,15 +60,18 @@ CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=17 # CONFIG_CPUSETS is not set CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y @@ -82,14 +86,19 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set # # Loadable module support @@ -127,39 +136,38 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_PPC_MULTIPLATFORM=y # CONFIG_EMBEDDED6xx is not set # CONFIG_APUS is not set -CONFIG_PPC_PSERIES=y +# CONFIG_PPC_PSERIES is not set # CONFIG_PPC_ISERIES is not set # CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_MPC5200 is not set # CONFIG_PPC_PMAC is not set # CONFIG_PPC_MAPLE is not set CONFIG_PPC_PASEMI=y + +# +# PA Semi PWRficient options +# +CONFIG_PPC_PASEMI_IOMMU=y +CONFIG_PPC_PASEMI_MDIO=y +# CONFIG_PPC_CELLEB is not set +# CONFIG_PPC_PS3 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PPC_IBM_CELL_BLADE is not set -# CONFIG_PPC_PS3 is not set +# CONFIG_PQ2ADS is not set CONFIG_PPC_NATIVE=y -# CONFIG_UDBG_RTAS_CONSOLE is not set -CONFIG_XICS=y +CONFIG_MPIC=y +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set # CONFIG_U3_DART is not set -CONFIG_PPC_RTAS=y -CONFIG_RTAS_ERROR_LOGGING=y -CONFIG_RTAS_PROC=y -# CONFIG_RTAS_FLASH is not set +# CONFIG_PPC_RTAS is not set # CONFIG_MMIO_NVRAM is not set -CONFIG_IBMVIO=y -# CONFIG_IBMEBUS is not set # CONFIG_PPC_MPC106 is not set # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set -# CONFIG_WANT_EARLY_SERIAL is not set -CONFIG_MPIC=y - -# -# PA Semi PWRficient options -# -CONFIG_PPC_PASEMI_IOMMU=y +# CONFIG_CPM2 is not set # # Kernel options @@ -177,20 +185,14 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_IOMMU_VMERGE=y -# CONFIG_HOTPLUG_CPU is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set # CONFIG_IRQ_ALL_CPUS is not set -# CONFIG_PPC_SPLPAR is not set -CONFIG_EEH=y -# CONFIG_SCANLOG is not set -# CONFIG_LPARCFG is not set # CONFIG_NUMA is not set CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y -CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y @@ -201,24 +203,28 @@ CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_RESOURCES_64BIT=y +CONFIG_ZONE_DMA_FLAG=1 +# CONFIG_PPC_HAS_HASH_64K is not set # CONFIG_PPC_64K_PAGES is not set # CONFIG_SCHED_SMT is not set CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set # CONFIG_SECCOMP is not set +# CONFIG_WANT_DEVICE_TREE is not set CONFIG_ISA_DMA_API=y # # Bus options # +CONFIG_ZONE_DMA=y CONFIG_GENERIC_ISA_DMA=y -# CONFIG_MPIC_WEIRD is not set -CONFIG_PPC_I8259=y # CONFIG_PPC_INDIRECT_PCI is not set CONFIG_PCI=y CONFIG_PCI_DOMAINS=y # CONFIG_PCIEPORTBUS is not set +CONFIG_ARCH_SUPPORTS_MSI=y +# CONFIG_PCI_MSI is not set # CONFIG_PCI_DEBUG is not set # @@ -237,10 +243,6 @@ CONFIG_CARDBUS=y # CONFIG_YENTA is not set # CONFIG_PD6729 is not set # CONFIG_I82092 is not set - -# -# PCI Hotplug Support -# # CONFIG_HOTPLUG_PCI is not set CONFIG_KERNEL_START=0xc000000000000000 @@ -252,14 +254,15 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set CONFIG_NET_KEY=y +# CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set @@ -331,7 +334,16 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set # # Device Drivers @@ -344,16 +356,13 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # # Connector - unified userspace <-> kernelspace linker # # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set CONFIG_MTD_CONCAT=y @@ -389,7 +398,6 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access @@ -412,17 +420,13 @@ CONFIG_MTD_PHRAM=y # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# # CONFIG_MTD_NAND is not set -# CONFIG_MTD_NAND_CAFE is not set +# CONFIG_MTD_ONENAND is not set # -# OneNAND Flash Device Drivers +# UBI - Unsorted block images # -# CONFIG_MTD_ONENAND is not set +# CONFIG_MTD_UBI is not set # # Parallel port support @@ -432,6 +436,7 @@ CONFIG_MTD_PHRAM=y # # Plug and Play support # +# CONFIG_PNPACPI is not set # # Block devices @@ -451,15 +456,16 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=16384 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # # Misc devices # +# CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_BLINK is not set # # ATA/ATAPI/MFM/RLL support @@ -474,20 +480,22 @@ CONFIG_BLK_DEV_IDE=y CONFIG_BLK_DEV_IDEDISK=y CONFIG_IDEDISK_MULTI_MODE=y # CONFIG_BLK_DEV_IDECS is not set +# CONFIG_BLK_DEV_DELKIN is not set CONFIG_BLK_DEV_IDECD=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set CONFIG_BLK_DEV_IDESCSI=y CONFIG_IDE_TASK_IOCTL=y +CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # # CONFIG_IDE_GENERIC is not set # CONFIG_BLK_DEV_IDEPCI is not set +# CONFIG_IDEPCI_PCIBUS_ORDER is not set # CONFIG_IDE_ARM is not set # CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set # CONFIG_BLK_DEV_HD is not set # @@ -517,6 +525,7 @@ CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y # CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -550,7 +559,6 @@ CONFIG_SCSI_3W_9XXX=y # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_IBMVSCSI is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_STEX is not set @@ -563,6 +571,7 @@ CONFIG_SCSI_3W_9XXX=y # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_ESP_CORE is not set # CONFIG_SCSI_SRP is not set # @@ -578,7 +587,7 @@ CONFIG_SCSI_3W_9XXX=y CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set # CONFIG_SATA_AHCI is not set -CONFIG_SATA_SVW=y +# CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set CONFIG_SATA_MV=y # CONFIG_SATA_NV is not set @@ -586,16 +595,18 @@ CONFIG_SATA_MV=y # CONFIG_SATA_QSTOR is not set # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set -CONFIG_SATA_SIL=y +# CONFIG_SATA_SIL is not set CONFIG_SATA_SIL24=y # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set # CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set # CONFIG_PATA_CS5520 is not set # CONFIG_PATA_CS5530 is not set @@ -607,6 +618,7 @@ CONFIG_ATA_GENERIC=y # CONFIG_PATA_HPT3X2N is not set # CONFIG_PATA_HPT3X3 is not set # CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set # CONFIG_PATA_JMICRON is not set # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_MARVELL is not set @@ -644,27 +656,26 @@ CONFIG_ATA_GENERIC=y # # IEEE 1394 (FireWire) support # +# CONFIG_FIREWIRE is not set CONFIG_IEEE1394=y # # Subsystem Options # # CONFIG_IEEE1394_VERBOSEDEBUG is not set -# CONFIG_IEEE1394_OUI_DB is not set -# CONFIG_IEEE1394_EXTRA_CONFIG_ROMS is not set -# CONFIG_IEEE1394_EXPORT_FULL_API is not set # -# Device Drivers +# Controllers # CONFIG_IEEE1394_PCILYNX=y CONFIG_IEEE1394_OHCI1394=y # -# Protocol Drivers +# Protocols # # CONFIG_IEEE1394_VIDEO1394 is not set CONFIG_IEEE1394_SBP2=y +# CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set # CONFIG_IEEE1394_ETH1394 is not set # CONFIG_IEEE1394_DV1394 is not set CONFIG_IEEE1394_RAWIO=y @@ -673,12 +684,7 @@ CONFIG_IEEE1394_RAWIO=y # I2O device support # # CONFIG_I2O is not set - -# -# Macintosh device drivers -# -# CONFIG_MAC_EMUMOUSEBTN is not set -# CONFIG_WINDFARM is not set +# CONFIG_MACINTOSH_DRIVERS is not set # # Network device support @@ -697,7 +703,20 @@ CONFIG_DUMMY=y # # PHY device support # -# CONFIG_PHYLIB is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +CONFIG_MARVELL_PHY=y +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_FIXED_PHY is not set # # Ethernet (10 or 100Mbit) @@ -714,7 +733,6 @@ CONFIG_MII=y # # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set -CONFIG_IBMVETH=y CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set @@ -722,7 +740,7 @@ CONFIG_NET_PCI=y # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set # CONFIG_DGRS is not set -CONFIG_EEPRO100=y +# CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set @@ -733,6 +751,7 @@ CONFIG_EEPRO100=y # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set # CONFIG_VIA_RHINE is not set +# CONFIG_SC92031 is not set # # Ethernet (1000 Mbit) @@ -754,15 +773,20 @@ CONFIG_E1000_NAPI=y CONFIG_TIGON3=y # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set # # Ethernet (10000 Mbit) # # CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set +CONFIG_PASEMI_MAC=y +# CONFIG_MLX4_CORE is not set +CONFIG_MLX4_DEBUG=y # # Token Ring devices @@ -770,9 +794,20 @@ CONFIG_TIGON3=y # CONFIG_TR is not set # -# Wireless LAN (non-hamradio) +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# USB Network Adapters # -# CONFIG_NET_RADIO is not set +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set +# CONFIG_USB_USBNET is not set # # PCMCIA network device support @@ -834,8 +869,10 @@ CONFIG_INPUT_KEYBOARD=y CONFIG_INPUT_MOUSE=y # CONFIG_MOUSE_PS2 is not set # CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_APPLETOUCH is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -870,29 +907,21 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_ICOM is not set # CONFIG_SERIAL_JSM is not set +# CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=4 -CONFIG_HVC_DRIVER=y -CONFIG_HVC_CONSOLE=y -CONFIG_HVC_RTAS=y -# CONFIG_HVCS is not set # # IPMI # # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# # CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y +CONFIG_HW_RANDOM_PASEMI=y CONFIG_GEN_RTC=y CONFIG_GEN_RTC_X=y -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_AGP is not set @@ -912,11 +941,9 @@ CONFIG_MAX_RAW_DEVS=256 # TPM devices # # CONFIG_TCG_TPM is not set - -# -# I2C support -# +CONFIG_DEVPORT=y CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # @@ -940,16 +967,18 @@ CONFIG_I2C_ALGOPCA=y # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set +CONFIG_I2C_PASEMI=y # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set +# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set # CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set # # Miscellaneous I2C Chip support @@ -963,7 +992,7 @@ CONFIG_SENSORS_EEPROM=y # CONFIG_SENSORS_MAX6875 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set -CONFIG_I2C_DEBUG_BUS=y +# CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # @@ -976,16 +1005,14 @@ CONFIG_I2C_DEBUG_BUS=y # Dallas's 1-wire bus # # CONFIG_W1 is not set - -# -# Hardware Monitoring support -# CONFIG_HWMON=y CONFIG_HWMON_VID=y # CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ASB100 is not set @@ -1008,6 +1035,7 @@ CONFIG_SENSORS_LM85=y CONFIG_SENSORS_LM90=y # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_SIS5595 is not set @@ -1027,29 +1055,50 @@ CONFIG_SENSORS_LM90=y # CONFIG_HWMON_DEBUG_CHIP is not set # -# Multimedia devices +# Multifunction device drivers # -# CONFIG_VIDEO_DEV is not set +# CONFIG_MFD_SM501 is not set # -# Digital Video Broadcasting Devices +# Multimedia devices # -# CONFIG_DVB is not set +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y # CONFIG_USB_DABUSB is not set # # Graphics support # -CONFIG_FIRMWARE_EDID=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_LCD_CLASS_DEVICE=m + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +CONFIG_VGASTATE=y CONFIG_FB=y +CONFIG_FIRMWARE_EDID=y CONFIG_FB_DDC=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set CONFIG_FB_MACMODES=y -# CONFIG_FB_BACKLIGHT is not set +CONFIG_FB_BACKLIGHT=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y + +# +# Frame buffer hardware drivers +# # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set @@ -1060,28 +1109,27 @@ CONFIG_FB_VGA16=y # CONFIG_FB_S1D13XXX is not set CONFIG_FB_NVIDIA=y CONFIG_FB_NVIDIA_I2C=y -CONFIG_FB_RIVA=y -CONFIG_FB_RIVA_I2C=y -# CONFIG_FB_RIVA_DEBUG is not set -CONFIG_FB_MATROX=y -CONFIG_FB_MATROX_MILLENIUM=y -CONFIG_FB_MATROX_MYSTIQUE=y -CONFIG_FB_MATROX_G=y -CONFIG_FB_MATROX_I2C=y -CONFIG_FB_MATROX_MAVEN=y -CONFIG_FB_MATROX_MULTIHEAD=y +# CONFIG_FB_NVIDIA_DEBUG is not set +CONFIG_FB_NVIDIA_BACKLIGHT=y +# CONFIG_FB_RIVA is not set +# CONFIG_FB_MATROX is not set CONFIG_FB_RADEON=y CONFIG_FB_RADEON_I2C=y +CONFIG_FB_RADEON_BACKLIGHT=y # CONFIG_FB_RADEON_DEBUG is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set # CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set # CONFIG_FB_IBM_GXT4500 is not set # CONFIG_FB_VIRTUAL is not set @@ -1097,15 +1145,10 @@ CONFIG_FRAMEBUFFER_CONSOLE=y # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y - -# -# Logo configuration -# CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -1211,6 +1254,7 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_USB_AUDIO=y CONFIG_SND_USB_USX2Y=y +# CONFIG_SND_USB_CAIAQ is not set # # PCMCIA devices @@ -1219,6 +1263,11 @@ CONFIG_SND_USB_USX2Y=y # CONFIG_SND_PDAUDIOCF is not set # +# System on Chip audio support +# +# CONFIG_SND_SOC is not set + +# # Open Sound System # # CONFIG_SOUND_PRIME is not set @@ -1227,6 +1276,15 @@ CONFIG_SND_USB_USX2Y=y # HID Devices # CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set # # USB support @@ -1241,7 +1299,7 @@ CONFIG_USB=y # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DEVICE_CLASS is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set @@ -1252,9 +1310,15 @@ CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_HCD_PPC_OF=y +CONFIG_USB_OHCI_HCD_PPC_OF_BE=y +# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set +CONFIG_USB_OHCI_HCD_PCI=y +CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y +CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=y CONFIG_USB_SL811_HCD=y @@ -1289,41 +1353,11 @@ CONFIG_USB_STORAGE=y CONFIG_USB_LIBUSUAL=y # -# USB Input Devices -# -CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set -# CONFIG_USB_HIDDEV is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_TOUCHSCREEN is not set -# CONFIG_USB_YEALINK is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set -# CONFIG_USB_ATI_REMOTE2 is not set -# CONFIG_USB_KEYSPAN_REMOTE is not set -# CONFIG_USB_APPLETOUCH is not set - -# # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET_MII is not set -# CONFIG_USB_USBNET is not set -CONFIG_USB_MON=y +# CONFIG_USB_MON is not set # # USB port drivers @@ -1344,6 +1378,7 @@ CONFIG_USB_MON=y # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set @@ -1354,6 +1389,7 @@ CONFIG_USB_MON=y # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # @@ -1364,10 +1400,6 @@ CONFIG_USB_MON=y # USB Gadget Support # # CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# # CONFIG_MMC is not set # @@ -1408,24 +1440,37 @@ CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# RTC drivers +# I2C RTC drivers # -# CONFIG_RTC_DRV_X1205 is not set CONFIG_RTC_DRV_DS1307=y -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_ISL1208 is not set # CONFIG_RTC_DRV_DS1672 is not set -# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set -# CONFIG_RTC_DRV_RS5C372 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_TEST is not set # CONFIG_RTC_DRV_V3020 is not set # +# on-CPU RTC drivers +# + +# # DMA Engine support # # CONFIG_DMA_ENGINE is not set @@ -1439,10 +1484,6 @@ CONFIG_RTC_DRV_DS1307=y # # -# Virtualization -# - -# # File systems # CONFIG_EXT2_FS=y @@ -1466,7 +1507,8 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set -# CONFIG_INOTIFY is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=y @@ -1538,6 +1580,7 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1567,6 +1610,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SUN_PARTITION is not set # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set # # Native Language Support @@ -1616,6 +1660,8 @@ CONFIG_NLS_ISO8859_1=y # Distributed Lock Manager # # CONFIG_DLM is not set +# CONFIG_UCC_SLOW is not set +# CONFIG_UCC_FAST is not set # # Library routines @@ -1623,10 +1669,13 @@ CONFIG_NLS_ISO8859_1=y CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_PLIST=y -CONFIG_IOMAP_COPY=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y # # Instrumentation Support @@ -1645,32 +1694,34 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y -CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_RWSEMS is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y -CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set -CONFIG_FORCED_INLINING=y +# CONFIG_FORCED_INLINING is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_DEBUGGER=y CONFIG_XMON=y CONFIG_XMON_DEFAULT=y CONFIG_XMON_DISASSEMBLY=y # CONFIG_IRQSTACKS is not set -CONFIG_BOOTX_TEXT=y +# CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -1700,8 +1751,11 @@ CONFIG_CRYPTO_SHA1=y # CONFIG_CRYPTO_GF128MUL is not set CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set # CONFIG_CRYPTO_SERPENT is not set @@ -1715,6 +1769,7 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set # diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index 9cb24d20f0f94e..b2b5d664d32861 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -235,6 +235,7 @@ static struct cpu_spec cpu_specs[] = { .icache_bsize = 128, .dcache_bsize = 128, .num_pmcs = 8, + .pmc_type = PPC_PMC_IBM, .cpu_setup = __setup_cpu_ppc970, .cpu_restore = __restore_cpu_ppc970, .oprofile_cpu_type = "ppc64/970MP", @@ -251,6 +252,7 @@ static struct cpu_spec cpu_specs[] = { .icache_bsize = 128, .dcache_bsize = 128, .num_pmcs = 8, + .pmc_type = PPC_PMC_IBM, .cpu_setup = __setup_cpu_ppc970MP, .cpu_restore = __restore_cpu_ppc970, .oprofile_cpu_type = "ppc64/970MP", @@ -317,6 +319,7 @@ static struct cpu_spec cpu_specs[] = { .icache_bsize = 128, .dcache_bsize = 128, .num_pmcs = 6, + .pmc_type = PPC_PMC_IBM, .oprofile_cpu_type = "ppc64/power6", .oprofile_type = PPC_OPROFILE_POWER4, .oprofile_mmcra_sihv = POWER6_MMCRA_SIHV, @@ -335,6 +338,7 @@ static struct cpu_spec cpu_specs[] = { .icache_bsize = 128, .dcache_bsize = 128, .num_pmcs = 6, + .pmc_type = PPC_PMC_IBM, .oprofile_cpu_type = "ppc64/power6", .oprofile_type = PPC_OPROFILE_POWER4, .oprofile_mmcra_sihv = POWER6_MMCRA_SIHV, @@ -836,7 +840,7 @@ static struct cpu_spec cpu_specs[] = { .pvr_mask = 0xffff0000, .pvr_value = 0x80040000, .cpu_name = "7448", - .cpu_features = CPU_FTRS_7447A, + .cpu_features = CPU_FTRS_7448, .cpu_user_features = COMMON_USER | PPC_FEATURE_HAS_ALTIVEC_COMP | PPC_FEATURE_PPC_LE, .icache_bsize = 32, diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S index c29d1652a421d1..4074c0b314537a 100644 --- a/arch/powerpc/kernel/entry_32.S +++ b/arch/powerpc/kernel/entry_32.S @@ -596,7 +596,11 @@ fast_exception_return: mr r12,r4 /* restart at exc_exit_restart */ b 2b - .comm fee_restarts,4 + .section .bss + .align 2 +fee_restarts: + .space 4 + .previous /* aargh, a nonrecoverable interrupt, panic */ /* aargh, we don't know which trap this is */ @@ -851,7 +855,11 @@ load_dbcr0: mtspr SPRN_DBSR,r11 /* clear all pending debug events */ blr - .comm global_dbcr0,8 + .section .bss + .align 4 +global_dbcr0: + .space 8 + .previous #endif /* !(CONFIG_4xx || CONFIG_BOOKE) */ do_work: /* r10 contains MSR_KERNEL here */ @@ -926,7 +934,11 @@ END_FTR_SECTION_IFSET(CPU_FTR_601) /* shouldn't return */ b 4b - .comm ee_restarts,4 + .section .bss + .align 2 +ee_restarts: + .space 4 + .previous /* * PROM code for specific machines follows. Put it diff --git a/arch/powerpc/kernel/of_platform.c b/arch/powerpc/kernel/of_platform.c index 84c34d979a8807..d501c23e515955 100644 --- a/arch/powerpc/kernel/of_platform.c +++ b/arch/powerpc/kernel/of_platform.c @@ -427,11 +427,13 @@ static int __devinit of_pci_phb_probe(struct of_device *dev, /* Process "ranges" property */ pci_process_bridge_OF_ranges(phb, dev->node, 0); - /* Setup IO space. - * This will not work properly for ISA IOs, something needs to be done - * about it if we ever generalize that way of probing PCI brigdes + /* Setup IO space. We use the non-dynamic version of that code here, + * which doesn't quite support unplugging. Next kernel release will + * have a better fix for this. + * Note also that we don't do ISA, this will also be fixed with a + * more massive rework. */ - pci_setup_phb_io_dynamic(phb, 0); + pci_setup_phb_io(phb, 0); /* Init pci_dn data structures */ pci_devs_phb_init_dynamic(phb); diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c index b0409e19b1c156..249cca27a9b84a 100644 --- a/arch/powerpc/kernel/pci_64.c +++ b/arch/powerpc/kernel/pci_64.c @@ -41,6 +41,7 @@ unsigned long pci_probe_only = 1; int pci_assign_all_buses = 0; +static int pci_initial_scan_done; static void fixup_resource(struct resource *res, struct pci_dev *dev); static void do_bus_setup(struct pci_bus *bus); @@ -604,6 +605,8 @@ static int __init pcibios_init(void) /* map in PCI I/O space */ phbs_remap_io(); + pci_initial_scan_done = 1; + printk(KERN_DEBUG "PCI: Probing PCI hardware done\n"); return 0; @@ -1042,13 +1045,16 @@ void __devinit pci_process_bridge_OF_ranges(struct pci_controller *hose, } } -void __init pci_setup_phb_io(struct pci_controller *hose, int primary) +void __devinit pci_setup_phb_io(struct pci_controller *hose, int primary) { unsigned long size = hose->pci_io_size; unsigned long io_virt_offset; struct resource *res; struct device_node *isa_dn; + if (size == 0) + return; + hose->io_base_virt = reserve_phb_iospace(size); DBG("phb%d io_base_phys 0x%lx io_base_virt 0x%lx\n", hose->global_number, hose->io_base_phys, @@ -1069,6 +1075,15 @@ void __init pci_setup_phb_io(struct pci_controller *hose, int primary) res = &hose->io_resource; res->start += io_virt_offset; res->end += io_virt_offset; + + /* If this is called after the initial PCI scan, then we need to + * proceed to IO mappings now + */ + if (pci_initial_scan_done) + __ioremap_explicit(hose->io_base_phys, + (unsigned long)hose->io_base_virt, + hose->pci_io_size, + _PAGE_NO_CACHE | _PAGE_GUARDED); } void __devinit pci_setup_phb_io_dynamic(struct pci_controller *hose, @@ -1078,6 +1093,9 @@ void __devinit pci_setup_phb_io_dynamic(struct pci_controller *hose, unsigned long io_virt_offset; struct resource *res; + if (size == 0) + return; + hose->io_base_virt = __ioremap(hose->io_base_phys, size, _PAGE_NO_CACHE | _PAGE_GUARDED); DBG("phb%d io_base_phys 0x%lx io_base_virt 0x%lx\n", @@ -1106,6 +1124,9 @@ static int get_bus_io_range(struct pci_bus *bus, unsigned long *start_phys, /* Root Bus */ res = &hose->io_resource; + if (res->end == 0 && res->start == 0) + return 1; + *start_virt = pci_io_base + res->start; *start_phys = *start_virt + hose->io_base_phys - (unsigned long) hose->io_base_virt; diff --git a/arch/powerpc/kernel/pmc.c b/arch/powerpc/kernel/pmc.c index 24d7b7c99bb9fa..ea04e0ab3f2f19 100644 --- a/arch/powerpc/kernel/pmc.c +++ b/arch/powerpc/kernel/pmc.c @@ -20,8 +20,8 @@ #include <asm/cputable.h> #include <asm/pmc.h> -#ifndef MMCR0_PMA0 -#define MMCR0_PMA0 0 +#ifndef MMCR0_PMAO +#define MMCR0_PMAO 0 #endif static void dummy_perf(struct pt_regs *regs) @@ -30,7 +30,7 @@ static void dummy_perf(struct pt_regs *regs) mtpmr(PMRN_PMGC0, mfpmr(PMRN_PMGC0) & ~PMGC0_PMIE); #elif defined(CONFIG_PPC64) || defined(CONFIG_6xx) if (cur_cpu_spec->pmc_type == PPC_PMC_IBM) - mtspr(SPRN_MMCR0, mfspr(SPRN_MMCR0) & ~(MMCR0_PMXE|MMCR0_PMA0)); + mtspr(SPRN_MMCR0, mfspr(SPRN_MMCR0) & ~(MMCR0_PMXE|MMCR0_PMAO)); #else mtspr(SPRN_MMCR0, mfspr(SPRN_MMCR0) & ~MMCR0_PMXE); #endif diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index c065b555036881..066a6a7a25b88c 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -1472,6 +1472,11 @@ static int of_finish_dynamic_node(struct device_node *node) node->name = of_get_property(node, "name", NULL); node->type = of_get_property(node, "device_type", NULL); + if (!node->name) + node->name = "<NULL>"; + if (!node->type) + node->type = "<NULL>"; + if (!parent) { err = -ENODEV; goto out; diff --git a/arch/powerpc/kernel/rtas-proc.c b/arch/powerpc/kernel/rtas-proc.c index 190b7ed1dbfb10..f2e3bc714d7695 100644 --- a/arch/powerpc/kernel/rtas-proc.c +++ b/arch/powerpc/kernel/rtas-proc.c @@ -379,7 +379,7 @@ static ssize_t ppc_rtas_progress_write(struct file *file, /* ****************************************************************** */ static int ppc_rtas_progress_show(struct seq_file *m, void *v) { - if (progress_led) + if (progress_led[0]) seq_printf(m, "%s\n", progress_led); return 0; } diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index 22f1ef1b3100ff..d577b71db37549 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -201,13 +201,6 @@ int smp_call_function_map(void (*func) (void *info), void *info, int nonatomic, /* Can deadlock when called with interrupts disabled */ WARN_ON(irqs_disabled()); - /* remove 'self' from the map */ - if (cpu_isset(smp_processor_id(), map)) - cpu_clear(smp_processor_id(), map); - - /* sanity check the map, remove any non-online processors. */ - cpus_and(map, map, cpu_online_map); - if (unlikely(smp_ops == NULL)) return ret; @@ -222,10 +215,17 @@ int smp_call_function_map(void (*func) (void *info), void *info, int nonatomic, /* Must grab online cpu count with preempt disabled, otherwise * it can change. */ num_cpus = num_online_cpus() - 1; - if (!num_cpus || cpus_empty(map)) { - ret = 0; - goto out; - } + if (!num_cpus) + goto done; + + /* remove 'self' from the map */ + if (cpu_isset(smp_processor_id(), map)) + cpu_clear(smp_processor_id(), map); + + /* sanity check the map, remove any non-online processors. */ + cpus_and(map, map, cpu_online_map); + if (cpus_empty(map)) + goto done; call_data = &data; smp_wmb(); @@ -263,6 +263,7 @@ int smp_call_function_map(void (*func) (void *info), void *info, int nonatomic, } } + done: ret = 0; out: @@ -282,16 +283,17 @@ EXPORT_SYMBOL(smp_call_function); int smp_call_function_single(int cpu, void (*func) (void *info), void *info, int nonatomic, int wait) { - cpumask_t map=CPU_MASK_NONE; + cpumask_t map = CPU_MASK_NONE; + int ret = -EBUSY; if (!cpu_online(cpu)) return -EINVAL; - if (cpu == smp_processor_id()) - return -EBUSY; - cpu_set(cpu, map); - return smp_call_function_map(func,info,nonatomic,wait,map); + if (cpu != get_cpu()) + ret = smp_call_function_map(func,info,nonatomic,wait,map); + put_cpu(); + return ret; } EXPORT_SYMBOL(smp_call_function_single); diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S index 132067313147b3..21c39ff2dc39b4 100644 --- a/arch/powerpc/kernel/vmlinux.lds.S +++ b/arch/powerpc/kernel/vmlinux.lds.S @@ -34,7 +34,7 @@ SECTIONS /* Text and gots */ .text : { _text = .; - *(.text .text.*) + TEXT_TEXT SCHED_TEXT LOCK_TEXT KPROBES_TEXT @@ -167,7 +167,7 @@ SECTIONS #ifdef CONFIG_PPC32 .data : { - *(.data) + DATA_DATA *(.sdata) *(.got.plt) *(.got) } diff --git a/arch/powerpc/lib/rheap.c b/arch/powerpc/lib/rheap.c index b2f6dcc59600bb..180ee2933ab96f 100644 --- a/arch/powerpc/lib/rheap.c +++ b/arch/powerpc/lib/rheap.c @@ -468,25 +468,19 @@ unsigned long rh_alloc_align(rh_info_t * info, int size, int alignment, const ch if (blk->size == size) { /* Move from free list to taken list */ list_del(&blk->list); - blk->owner = owner; - start = blk->start; - - attach_taken_block(info, blk); + newblk = blk; + } else { + newblk = get_slot(info); + newblk->start = blk->start; + newblk->size = size; - return start; + /* blk still in free list, with updated start, size */ + blk->start += size; + blk->size -= size; } - newblk = get_slot(info); - newblk->start = blk->start; - newblk->size = size; newblk->owner = owner; - - /* blk still in free list, with updated start, size */ - blk->start += size; - blk->size -= size; - start = newblk->start; - attach_taken_block(info, newblk); /* for larger alignment return fixed up pointer */ diff --git a/arch/powerpc/mm/hash_low_32.S b/arch/powerpc/mm/hash_low_32.S index ddceefc06ecc0a..7f830a4888d6e6 100644 --- a/arch/powerpc/mm/hash_low_32.S +++ b/arch/powerpc/mm/hash_low_32.S @@ -30,7 +30,11 @@ #include <asm/asm-offsets.h> #ifdef CONFIG_SMP - .comm mmu_hash_lock,4 + .section .bss + .align 2 + .globl mmu_hash_lock +mmu_hash_lock: + .space 4 #endif /* CONFIG_SMP */ /* @@ -455,9 +459,15 @@ found_slot: sync /* make sure pte updates get to memory */ blr - .comm next_slot,4 - .comm primary_pteg_full,4 - .comm htab_hash_searches,4 + .section .bss + .align 2 +next_slot: + .space 4 +primary_pteg_full: + .space 4 +htab_hash_searches: + .space 4 + .previous /* * Flush the entry for a particular page from the hash table. diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index 028ba4ed03d2c8..4f2f4534a9d8ba 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -430,7 +430,7 @@ static void __init htab_finish_init(void) make_bl(ht64_call_hpte_insert2, ppc_md.hpte_insert); make_bl(ht64_call_hpte_remove, ppc_md.hpte_remove); make_bl(ht64_call_hpte_updatepp, ppc_md.hpte_updatepp); -#endif /* CONFIG_PPC_64K_PAGES */ +#endif /* CONFIG_PPC_HAS_HASH_64K */ make_bl(htab_call_hpte_insert1, ppc_md.hpte_insert); make_bl(htab_call_hpte_insert2, ppc_md.hpte_insert); @@ -837,7 +837,7 @@ void hash_preload(struct mm_struct *mm, unsigned long ea, if (mm->context.user_psize == MMU_PAGE_64K) __hash_page_64K(ea, access, vsid, ptep, trap, local); else -#endif /* CONFIG_PPC_64K_PAGES */ +#endif /* CONFIG_PPC_HAS_HASH_64K */ __hash_page_4K(ea, access, vsid, ptep, trap, local); local_irq_restore(flags); diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index 246eeea40ecec4..0266a94d83b6e8 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -310,11 +310,12 @@ void __init paging_init(void) #ifdef CONFIG_HIGHMEM map_page(PKMAP_BASE, 0, 0); /* XXX gross */ - pkmap_page_table = pte_offset_kernel(pmd_offset(pgd_offset_k - (PKMAP_BASE), PKMAP_BASE), PKMAP_BASE); + pkmap_page_table = pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k + (PKMAP_BASE), PKMAP_BASE), PKMAP_BASE), PKMAP_BASE); map_page(KMAP_FIX_BEGIN, 0, 0); /* XXX gross */ - kmap_pte = pte_offset_kernel(pmd_offset(pgd_offset_k - (KMAP_FIX_BEGIN), KMAP_FIX_BEGIN), KMAP_FIX_BEGIN); + kmap_pte = pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k + (KMAP_FIX_BEGIN), KMAP_FIX_BEGIN), KMAP_FIX_BEGIN), + KMAP_FIX_BEGIN); kmap_prot = PAGE_KERNEL; #endif /* CONFIG_HIGHMEM */ diff --git a/arch/powerpc/mm/mmap.c b/arch/powerpc/mm/mmap.c index 972a8e884b9aec..86010fc7d3b17a 100644 --- a/arch/powerpc/mm/mmap.c +++ b/arch/powerpc/mm/mmap.c @@ -24,6 +24,7 @@ #include <linux/personality.h> #include <linux/mm.h> +#include <linux/sched.h> /* * Top of mmap area (just below the process stack). diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c index d8232b7a08f700..f6ae1a57d65299 100644 --- a/arch/powerpc/mm/pgtable_32.c +++ b/arch/powerpc/mm/pgtable_32.c @@ -93,7 +93,7 @@ void pgd_free(pgd_t *pgd) free_pages((unsigned long)pgd, PGDIR_ORDER); } -pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address) +__init_refok pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address) { pte_t *pte; extern int mem_init_done; diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c index 1d443407423ca0..ad6e135bf212ac 100644 --- a/arch/powerpc/mm/pgtable_64.c +++ b/arch/powerpc/mm/pgtable_64.c @@ -322,6 +322,8 @@ EXPORT_SYMBOL(__ioremap); EXPORT_SYMBOL(iounmap); EXPORT_SYMBOL(__iounmap); +static DEFINE_SPINLOCK(phb_io_lock); + void __iomem * reserve_phb_iospace(unsigned long size) { void __iomem *virt_addr; @@ -329,8 +331,10 @@ void __iomem * reserve_phb_iospace(unsigned long size) if (phbs_io_bot >= IMALLOC_BASE) panic("reserve_phb_iospace(): phb io space overflow\n"); + spin_lock(&phb_io_lock); virt_addr = (void __iomem *) phbs_io_bot; phbs_io_bot += size; + spin_unlock(&phb_io_lock); return virt_addr; } diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig index 8e66949e7c67c0..1b3e008fd14814 100644 --- a/arch/powerpc/platforms/44x/Kconfig +++ b/arch/powerpc/platforms/44x/Kconfig @@ -38,7 +38,8 @@ config 440EP config 440GP bool - select IBM_NEW_EMAC_ZMII +# Disabled until the new EMAC Driver is merged. +# select IBM_NEW_EMAC_ZMII config 440GX bool diff --git a/arch/powerpc/platforms/44x/ebony.c b/arch/powerpc/platforms/44x/ebony.c index ad526eafc90b81..5a7fec8d10d386 100644 --- a/arch/powerpc/platforms/44x/ebony.c +++ b/arch/powerpc/platforms/44x/ebony.c @@ -27,9 +27,9 @@ #include "44x.h" static struct of_device_id ebony_of_bus[] = { - { .type = "ibm,plb", }, - { .type = "ibm,opb", }, - { .type = "ibm,ebc", }, + { .compatible = "ibm,plb4", }, + { .compatible = "ibm,opb", }, + { .compatible = "ibm,ebc", }, {}, }; diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c index a93f328a73178f..7150730e2ff11b 100644 --- a/arch/powerpc/platforms/cell/spufs/inode.c +++ b/arch/powerpc/platforms/cell/spufs/inode.c @@ -71,9 +71,7 @@ spufs_init_once(void *p, struct kmem_cache * cachep, unsigned long flags) { struct spufs_inode_info *ei = p; - if (flags & SLAB_CTOR_CONSTRUCTOR) { - inode_init_once(&ei->vfs_inode); - } + inode_init_once(&ei->vfs_inode); } static struct inode * diff --git a/arch/powerpc/platforms/chrp/pegasos_eth.c b/arch/powerpc/platforms/chrp/pegasos_eth.c index 71045677559a6b..5bcc58d9a4dd39 100644 --- a/arch/powerpc/platforms/chrp/pegasos_eth.c +++ b/arch/powerpc/platforms/chrp/pegasos_eth.c @@ -169,7 +169,7 @@ static int Enable_SRAM(void) /***********/ /***********/ -int mv643xx_eth_add_pds(void) +static int __init mv643xx_eth_add_pds(void) { int ret = 0; static struct pci_device_id pci_marvell_mv64360[] = { diff --git a/arch/powerpc/platforms/iseries/viopath.c b/arch/powerpc/platforms/iseries/viopath.c index 354b8dd2a2c1e2..6a0060a5f2ecb5 100644 --- a/arch/powerpc/platforms/iseries/viopath.c +++ b/arch/powerpc/platforms/iseries/viopath.c @@ -37,6 +37,7 @@ #include <linux/wait.h> #include <linux/seq_file.h> #include <linux/interrupt.h> +#include <linux/completion.h> #include <asm/system.h> #include <asm/uaccess.h> @@ -81,7 +82,7 @@ static void handleMonitorEvent(struct HvLpEvent *event); * if system_state is not SYSTEM_RUNNING, then wait_atomic is used ... */ struct alloc_parms { - struct semaphore sem; + struct completion done; int number; atomic_t wait_atomic; int used_wait_atomic; @@ -115,7 +116,7 @@ static int proc_viopath_show(struct seq_file *m, void *v) u16 vlanMap; dma_addr_t handle; HvLpEvent_Rc hvrc; - DECLARE_MUTEX_LOCKED(Semaphore); + DECLARE_COMPLETION(done); struct device_node *node; const char *sysid; @@ -132,13 +133,13 @@ static int proc_viopath_show(struct seq_file *m, void *v) HvLpEvent_AckInd_DoAck, HvLpEvent_AckType_ImmediateAck, viopath_sourceinst(viopath_hostLp), viopath_targetinst(viopath_hostLp), - (u64)(unsigned long)&Semaphore, VIOVERSION << 16, + (u64)(unsigned long)&done, VIOVERSION << 16, ((u64)handle) << 32, HW_PAGE_SIZE, 0, 0); if (hvrc != HvLpEvent_Rc_Good) printk(VIOPATH_KERN_WARN "hv error on op %d\n", (int)hvrc); - down(&Semaphore); + wait_for_completion(&done); vlanMap = HvLpConfig_getVirtualLanIndexMap(); @@ -353,7 +354,7 @@ static void handleConfig(struct HvLpEvent *event) return; } - up((struct semaphore *)event->xCorrelationToken); + complete((struct completion *)event->xCorrelationToken); } /* @@ -464,7 +465,7 @@ static void viopath_donealloc(void *parm, int number) if (parmsp->used_wait_atomic) atomic_set(&parmsp->wait_atomic, 0); else - up(&parmsp->sem); + complete(&parmsp->done); } static int allocateEvents(HvLpIndex remoteLp, int numEvents) @@ -476,7 +477,7 @@ static int allocateEvents(HvLpIndex remoteLp, int numEvents) atomic_set(&parms.wait_atomic, 1); } else { parms.used_wait_atomic = 0; - init_MUTEX_LOCKED(&parms.sem); + init_completion(&parms.done); } mf_allocate_lp_events(remoteLp, HvLpEvent_Type_VirtualIo, 250, /* It would be nice to put a real number here! */ numEvents, &viopath_donealloc, &parms); @@ -484,7 +485,7 @@ static int allocateEvents(HvLpIndex remoteLp, int numEvents) while (atomic_read(&parms.wait_atomic)) mb(); } else - down(&parms.sem); + wait_for_completion(&parms.done); return parms.number; } @@ -585,10 +586,10 @@ int viopath_close(HvLpIndex remoteLp, int subtype, int numReq) spin_unlock_irqrestore(&statuslock, flags); parms.used_wait_atomic = 0; - init_MUTEX_LOCKED(&parms.sem); + init_completion(&parms.done); mf_deallocate_lp_events(remoteLp, HvLpEvent_Type_VirtualIo, numReq, &viopath_donealloc, &parms); - down(&parms.sem); + wait_for_completion(&parms.done); spin_lock_irqsave(&statuslock, flags); for (i = 0, numOpen = 0; i < VIO_MAX_SUBTYPES; i++) diff --git a/arch/powerpc/platforms/pasemi/Kconfig b/arch/powerpc/platforms/pasemi/Kconfig index eb4dbc705b0654..7c5076e38ea1c5 100644 --- a/arch/powerpc/platforms/pasemi/Kconfig +++ b/arch/powerpc/platforms/pasemi/Kconfig @@ -4,7 +4,6 @@ config PPC_PASEMI default n select MPIC select PPC_UDBG_16550 - select GENERIC_TBSYNC select PPC_NATIVE help This option enables support for PA Semi's PWRficient line diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c index a410bc76a8a8ee..07b1c4ec428d59 100644 --- a/arch/powerpc/platforms/powermac/setup.c +++ b/arch/powerpc/platforms/powermac/setup.c @@ -384,7 +384,7 @@ int boot_part; static dev_t boot_dev; #ifdef CONFIG_SCSI -void __init note_scsi_host(struct device_node *node, void *host) +void note_scsi_host(struct device_node *node, void *host) { int l; char *p; diff --git a/arch/powerpc/platforms/pseries/pseries.h b/arch/powerpc/platforms/pseries/pseries.h index 22bc019897495b..2729d559fd91b7 100644 --- a/arch/powerpc/platforms/pseries/pseries.h +++ b/arch/powerpc/platforms/pseries/pseries.h @@ -21,8 +21,8 @@ extern int pSeries_machine_check_exception(struct pt_regs *regs); extern void smp_init_pseries_mpic(void); extern void smp_init_pseries_xics(void); #else -static inline smp_init_pseries_mpic(void) { }; -static inline smp_init_pseries_xics(void) { }; +static inline void smp_init_pseries_mpic(void) { }; +static inline void smp_init_pseries_xics(void) { }; #endif #ifdef CONFIG_KEXEC diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index 4fd2bec89916f6..75aad38179f013 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -1424,7 +1424,7 @@ unsigned int mpic_get_irq(void) void mpic_request_ipis(void) { struct mpic *mpic = mpic_primary; - int i; + int i, err; static char *ipi_names[] = { "IPI0 (call function)", "IPI1 (reschedule)", @@ -1442,8 +1442,14 @@ void mpic_request_ipis(void) printk(KERN_ERR "Failed to map IPI %d\n", i); break; } - request_irq(vipi, mpic_ipi_action, IRQF_DISABLED|IRQF_PERCPU, - ipi_names[i], mpic); + err = request_irq(vipi, mpic_ipi_action, + IRQF_DISABLED|IRQF_PERCPU, + ipi_names[i], mpic); + if (err) { + printk(KERN_ERR "Request of irq %d for IPI %d failed\n", + vipi, i); + break; + } } } diff --git a/arch/powerpc/sysdev/qe_lib/Kconfig b/arch/powerpc/sysdev/qe_lib/Kconfig index 887739f3badc6a..f611d344a126e5 100644 --- a/arch/powerpc/sysdev/qe_lib/Kconfig +++ b/arch/powerpc/sysdev/qe_lib/Kconfig @@ -5,15 +5,13 @@ config UCC_SLOW bool default n - select UCC help This option provides qe_lib support to UCC slow protocols: UART, BISYNC, QMC config UCC_FAST bool - default n - select UCC + default y if UCC_GETH help This option provides qe_lib support to UCC fast protocols: HDLC, Ethernet, ATM, transparent diff --git a/arch/ppc/kernel/entry.S b/arch/ppc/kernel/entry.S index ab64256110bd2a..fba7ca17a67e15 100644 --- a/arch/ppc/kernel/entry.S +++ b/arch/ppc/kernel/entry.S @@ -596,7 +596,11 @@ fast_exception_return: mr r12,r4 /* restart at exc_exit_restart */ b 2b - .comm fee_restarts,4 + .section .bss + .align 2 +fee_restarts: + .space 4 + .previous /* aargh, a nonrecoverable interrupt, panic */ /* aargh, we don't know which trap this is */ @@ -851,7 +855,11 @@ load_dbcr0: mtspr SPRN_DBSR,r11 /* clear all pending debug events */ blr - .comm global_dbcr0,8 + .section .bss + .align 4 +global_dbcr0: + .space 8 + .previous #endif /* !(CONFIG_4xx || CONFIG_BOOKE) */ do_work: /* r10 contains MSR_KERNEL here */ @@ -926,4 +934,8 @@ END_FTR_SECTION_IFSET(CPU_FTR_601) /* shouldn't return */ b 4b - .comm ee_restarts,4 + .section .bss + .align 2 +ee_restarts: + .space 4 + .previous diff --git a/arch/ppc/kernel/ppc_ksyms.c b/arch/ppc/kernel/ppc_ksyms.c index 4ad499605d056b..a4165209ac7cd7 100644 --- a/arch/ppc/kernel/ppc_ksyms.c +++ b/arch/ppc/kernel/ppc_ksyms.c @@ -40,7 +40,6 @@ #include <asm/time.h> #include <asm/cputable.h> #include <asm/btext.h> -#include <asm/div64.h> #include <asm/xmon.h> #include <asm/signal.h> #include <asm/dcr.h> @@ -93,7 +92,6 @@ EXPORT_SYMBOL(strncpy); EXPORT_SYMBOL(strcat); EXPORT_SYMBOL(strlen); EXPORT_SYMBOL(strcmp); -EXPORT_SYMBOL(__div64_32); EXPORT_SYMBOL(csum_partial); EXPORT_SYMBOL(csum_partial_copy_generic); diff --git a/arch/ppc/kernel/vmlinux.lds.S b/arch/ppc/kernel/vmlinux.lds.S index 44cd128fb719a5..19db8746ff1460 100644 --- a/arch/ppc/kernel/vmlinux.lds.S +++ b/arch/ppc/kernel/vmlinux.lds.S @@ -32,7 +32,7 @@ SECTIONS .text : { _text = .; - *(.text) + TEXT_TEXT SCHED_TEXT LOCK_TEXT *(.fixup) @@ -67,7 +67,7 @@ SECTIONS . = ALIGN(4096); .data : { - *(.data) + DATA_DATA *(.data1) *(.sdata) *(.sdata2) diff --git a/arch/ppc/mm/hashtable.S b/arch/ppc/mm/hashtable.S index e756942e65c40f..5f364dc501549b 100644 --- a/arch/ppc/mm/hashtable.S +++ b/arch/ppc/mm/hashtable.S @@ -30,7 +30,11 @@ #include <asm/asm-offsets.h> #ifdef CONFIG_SMP - .comm mmu_hash_lock,4 + .section .bss + .align 2 + .globl mmu_hash_lock +mmu_hash_lock: + .space 4 #endif /* CONFIG_SMP */ /* @@ -461,9 +465,17 @@ found_slot: sync /* make sure pte updates get to memory */ blr - .comm next_slot,4 - .comm primary_pteg_full,4 - .comm htab_hash_searches,4 + .section .bss + .align 2 +next_slot: + .space 4 + .globl primary_pteg_full +primary_pteg_full: + .space 4 + .globl htab_hash_searches +htab_hash_searches: + .space 4 + .previous /* * Flush the entry for a particular page from the hash table. diff --git a/arch/ppc/mm/pgtable.c b/arch/ppc/mm/pgtable.c index c023b7298809b2..35ebb6395ae332 100644 --- a/arch/ppc/mm/pgtable.c +++ b/arch/ppc/mm/pgtable.c @@ -92,7 +92,7 @@ void pgd_free(pgd_t *pgd) free_pages((unsigned long)pgd, PGDIR_ORDER); } -pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address) +__init_refok pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address) { pte_t *pte; extern int mem_init_done; diff --git a/arch/ppc/syslib/pq2_sys.c b/arch/ppc/syslib/pq2_sys.c index f52600c0db202c..9c85300846c790 100644 --- a/arch/ppc/syslib/pq2_sys.c +++ b/arch/ppc/syslib/pq2_sys.c @@ -26,7 +26,7 @@ struct ppc_sys_spec ppc_sys_specs[] = { { MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_FCC3, MPC82xx_CPM_SCC1, MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3, - MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC1, MPC82xx_CPM_SMC1, + MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC2, MPC82xx_CPM_SMC1, MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI, MPC82xx_CPM_I2C, } }, @@ -39,7 +39,7 @@ struct ppc_sys_spec ppc_sys_specs[] = { { MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_SCC1, MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3, MPC82xx_CPM_SCC4, - MPC82xx_CPM_MCC1, MPC82xx_CPM_SMC1, MPC82xx_CPM_SMC2, + MPC82xx_CPM_MCC2, MPC82xx_CPM_SMC1, MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI, MPC82xx_CPM_I2C, } }, @@ -47,52 +47,56 @@ struct ppc_sys_spec ppc_sys_specs[] = { .ppc_sys_name = "8260", .mask = 0x0000ff00, .value = 0x00000000, - .num_devices = 12, + .num_devices = 13, .device_list = (enum ppc_sys_devices[]) { MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_FCC3, MPC82xx_CPM_SCC1, MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3, - MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC1, MPC82xx_CPM_SMC1, - MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI, MPC82xx_CPM_I2C, + MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC1, MPC82xx_CPM_MCC2, + MPC82xx_CPM_SMC1, MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI, + MPC82xx_CPM_I2C, } }, { .ppc_sys_name = "8264", .mask = 0x0000ff00, .value = 0x00000000, - .num_devices = 12, + .num_devices = 13, .device_list = (enum ppc_sys_devices[]) { MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_FCC3, MPC82xx_CPM_SCC1, MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3, - MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC1, MPC82xx_CPM_SMC1, - MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI, MPC82xx_CPM_I2C, + MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC1, MPC82xx_CPM_MCC2, + MPC82xx_CPM_SMC1, MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI, + MPC82xx_CPM_I2C, } }, { .ppc_sys_name = "8265", .mask = 0x0000ff00, .value = 0x00000000, - .num_devices = 12, + .num_devices = 13, .device_list = (enum ppc_sys_devices[]) { MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_FCC3, MPC82xx_CPM_SCC1, MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3, - MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC1, MPC82xx_CPM_SMC1, - MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI, MPC82xx_CPM_I2C, + MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC1, MPC82xx_CPM_MCC2, + MPC82xx_CPM_SMC1, MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI, + MPC82xx_CPM_I2C, } }, { .ppc_sys_name = "8266", .mask = 0x0000ff00, .value = 0x00000000, - .num_devices = 12, + .num_devices = 13, .device_list = (enum ppc_sys_devices[]) { MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_FCC3, MPC82xx_CPM_SCC1, MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3, - MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC1, MPC82xx_CPM_SMC1, - MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI, MPC82xx_CPM_I2C, + MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC1, MPC82xx_CPM_MCC2, + MPC82xx_CPM_SMC1, MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI, + MPC82xx_CPM_I2C, } }, /* below is a list of the 8272 family of processors */ @@ -159,7 +163,7 @@ struct ppc_sys_spec ppc_sys_specs[] = { { MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_FCC3, MPC82xx_CPM_SCC1, MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3, - MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC1, MPC82xx_CPM_SMC1, + MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC2, MPC82xx_CPM_SMC1, MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI, MPC82xx_CPM_I2C, }, }, @@ -172,7 +176,7 @@ struct ppc_sys_spec ppc_sys_specs[] = { { MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_FCC3, MPC82xx_CPM_SCC1, MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3, - MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC1, MPC82xx_CPM_SMC1, + MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC2, MPC82xx_CPM_SMC1, MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI, MPC82xx_CPM_I2C, }, }, diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S index 32a69a18a796bc..acc415457b45ac 100644 --- a/arch/s390/kernel/compat_wrapper.S +++ b/arch/s390/kernel/compat_wrapper.S @@ -1682,3 +1682,31 @@ compat_sys_utimes_wrapper: llgtr %r2,%r2 # char * llgtr %r3,%r3 # struct compat_timeval * jg compat_sys_utimes + + .globl compat_sys_utimensat_wrapper +compat_sys_utimensat_wrapper: + llgfr %r2,%r2 # unsigned int + llgtr %r3,%r3 # char * + llgtr %r4,%r4 # struct compat_timespec * + lgfr %r5,%r5 # int + jg compat_sys_utimensat + + .globl compat_sys_signalfd_wrapper +compat_sys_signalfd_wrapper: + lgfr %r2,%r2 # int + llgtr %r3,%r3 # compat_sigset_t * + llgfr %r4,%r4 # compat_size_t + jg compat_sys_signalfd + + .globl compat_sys_timerfd_wrapper +compat_sys_timerfd_wrapper: + lgfr %r2,%r2 # int + lgfr %r3,%r3 # int + lgfr %r4,%r4 # int + llgtr %r5,%r5 # struct compat_itimerspec * + jg compat_sys_timerfd + + .globl sys_eventfd_wrapper +sys_eventfd_wrapper: + llgfr %r2,%r2 # unsigned int + jg sys_eventfd diff --git a/arch/s390/kernel/kprobes.c b/arch/s390/kernel/kprobes.c index e39333ae0fcf29..358d2bbbc48105 100644 --- a/arch/s390/kernel/kprobes.c +++ b/arch/s390/kernel/kprobes.c @@ -413,7 +413,7 @@ static int __kprobes trampoline_probe_handler(struct kprobe *p, break; } } - BUG_ON(!orig_ret_address || (orig_ret_address == trampoline_address)); + kretprobe_assert(ri, orig_ret_address, trampoline_address); regs->psw.addr = orig_ret_address | PSW_ADDR_AMODE; reset_current_kprobe(); diff --git a/arch/s390/kernel/syscalls.S b/arch/s390/kernel/syscalls.S index cd8d321cd0c27c..738feb4a0aadf4 100644 --- a/arch/s390/kernel/syscalls.S +++ b/arch/s390/kernel/syscalls.S @@ -322,3 +322,8 @@ NI_SYSCALL /* 310 sys_move_pages */ SYSCALL(sys_getcpu,sys_getcpu,sys_getcpu_wrapper) SYSCALL(sys_epoll_pwait,sys_epoll_pwait,compat_sys_epoll_pwait_wrapper) SYSCALL(sys_utimes,sys_utimes,compat_sys_utimes_wrapper) +NI_SYSCALL /* 314 sys_fallocate */ +SYSCALL(sys_utimensat,sys_utimensat,compat_sys_utimensat_wrapper) /* 315 */ +SYSCALL(sys_signalfd,sys_signalfd,compat_sys_signalfd_wrapper) +SYSCALL(sys_timerfd,sys_timerfd,compat_sys_timerfd_wrapper) +SYSCALL(sys_eventfd,sys_eventfd,sys_eventfd_wrapper) diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S index e9d3432aba6096..7158a804a5e4f4 100644 --- a/arch/s390/kernel/vmlinux.lds.S +++ b/arch/s390/kernel/vmlinux.lds.S @@ -21,7 +21,7 @@ SECTIONS . = 0x00000000; _text = .; /* Text and read-only data */ .text : { - *(.text) + TEXT_TEXT SCHED_TEXT LOCK_TEXT KPROBES_TEXT @@ -48,7 +48,7 @@ SECTIONS BUG_TABLE .data : { /* Data */ - *(.data) + DATA_DATA CONSTRUCTORS } diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c index 916b72a8cde8ee..9098531a267140 100644 --- a/arch/s390/mm/init.c +++ b/arch/s390/mm/init.c @@ -61,30 +61,38 @@ void diag10(unsigned long addr) void show_mem(void) { - int i, total = 0, reserved = 0; - int shared = 0, cached = 0; + int i, total = 0, reserved = 0; + int shared = 0, cached = 0; struct page *page; - printk("Mem-info:\n"); - show_free_areas(); - printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10)); - i = max_mapnr; - while (i-- > 0) { + printk("Mem-info:\n"); + show_free_areas(); + printk("Free swap: %6ldkB\n", nr_swap_pages << (PAGE_SHIFT - 10)); + i = max_mapnr; + while (i-- > 0) { if (!pfn_valid(i)) continue; page = pfn_to_page(i); - total++; + total++; if (PageReserved(page)) - reserved++; + reserved++; else if (PageSwapCache(page)) - cached++; + cached++; else if (page_count(page)) shared += page_count(page) - 1; - } - printk("%d pages of RAM\n",total); - printk("%d reserved pages\n",reserved); - printk("%d pages shared\n",shared); - printk("%d pages swap cached\n",cached); + } + printk("%d pages of RAM\n", total); + printk("%d reserved pages\n", reserved); + printk("%d pages shared\n", shared); + printk("%d pages swap cached\n", cached); + + printk("%lu pages dirty\n", global_page_state(NR_FILE_DIRTY)); + printk("%lu pages writeback\n", global_page_state(NR_WRITEBACK)); + printk("%lu pages mapped\n", global_page_state(NR_FILE_MAPPED)); + printk("%lu pages slab\n", + global_page_state(NR_SLAB_RECLAIMABLE) + + global_page_state(NR_SLAB_UNRECLAIMABLE)); + printk("%lu pages pagetables\n", global_page_state(NR_PAGETABLE)); } static void __init setup_ro_region(void) diff --git a/arch/sh/boards/landisk/gio.c b/arch/sh/boards/landisk/gio.c index 50d38be62f01a8..a37643d002b2bb 100644 --- a/arch/sh/boards/landisk/gio.c +++ b/arch/sh/boards/landisk/gio.c @@ -69,7 +69,7 @@ static int gio_ioctl(struct inode *inode, struct file *filp, } switch (cmd) { - case GIODRV_IOCSGIOSETADDR: /* addres set */ + case GIODRV_IOCSGIOSETADDR: /* address set */ addr = data; break; diff --git a/arch/sh/boards/landisk/setup.c b/arch/sh/boards/landisk/setup.c index 4058b4f50d44ed..f953c74277695b 100644 --- a/arch/sh/boards/landisk/setup.c +++ b/arch/sh/boards/landisk/setup.c @@ -44,8 +44,14 @@ static struct platform_device cf_ide_device = { }, }; +static struct platform_device rtc_device = { + .name = "rs5c313", + .id = -1, +}; + static struct platform_device *landisk_devices[] __initdata = { &cf_ide_device, + &rtc_device, }; static int __init landisk_devices_setup(void) diff --git a/arch/sh/boards/renesas/r7780rp/Makefile b/arch/sh/boards/renesas/r7780rp/Makefile index 609e5d50dde83f..b1d20afb4eb3b6 100644 --- a/arch/sh/boards/renesas/r7780rp/Makefile +++ b/arch/sh/boards/renesas/r7780rp/Makefile @@ -3,5 +3,8 @@ # irqinit-y := irq-r7780rp.o irqinit-$(CONFIG_SH_R7785RP) := irq-r7785rp.o +obj-y := setup.o irq.o $(irqinit-y) + +ifneq ($(CONFIG_SH_R7785RP),y) obj-$(CONFIG_PUSH_SWITCH) += psw.o -obj-y := setup.o irq.o $(irqinit-y) +endif diff --git a/arch/sh/boards/snapgear/rtc.c b/arch/sh/boards/snapgear/rtc.c index 1659fdd6695a14..edb3dd936cbbf5 100644 --- a/arch/sh/boards/snapgear/rtc.c +++ b/arch/sh/boards/snapgear/rtc.c @@ -108,7 +108,7 @@ static void ds1302_writebyte(unsigned int addr, unsigned int val) static void ds1302_reset(void) { unsigned long flags; - /* Hardware dependant reset/init */ + /* Hardware dependent reset/init */ local_irq_save(flags); set_dirp(get_dirp() | RTC_RESET | RTC_IODATA | RTC_SCLK); set_dp(get_dp() & ~(RTC_RESET | RTC_IODATA | RTC_SCLK)); diff --git a/arch/sh/boards/superh/microdev/io.c b/arch/sh/boards/superh/microdev/io.c index 83419bf4c83444..b704e20d7e4dcc 100644 --- a/arch/sh/boards/superh/microdev/io.c +++ b/arch/sh/boards/superh/microdev/io.c @@ -198,12 +198,12 @@ void microdev_outb(unsigned char b, unsigned long port) /* * There is a board feature with the current SH4-202 MicroDev in * that the 2 byte enables (nBE0 and nBE1) are tied together (and - * to the Chip Select Line (Ethernet_CS)). Due to this conectivity, + * to the Chip Select Line (Ethernet_CS)). Due to this connectivity, * it is not possible to safely perform 8-bit writes to the * Ethernet registers, as 16-bits will be consumed from the Data * lines (corrupting the other byte). Hence, this function is - * written to impliment 16-bit read/modify/write for all byte-wide - * acceses. + * written to implement 16-bit read/modify/write for all byte-wide + * accesses. * * Note: there is no problem with byte READS (even or odd). * diff --git a/arch/sh/boards/superh/microdev/irq.c b/arch/sh/boards/superh/microdev/irq.c index 8c64baa3036471..cc1cb04fa61832 100644 --- a/arch/sh/boards/superh/microdev/irq.c +++ b/arch/sh/boards/superh/microdev/irq.c @@ -100,7 +100,7 @@ static void disable_microdev_irq(unsigned int irq) fpgaIrq = fpgaIrqTable[irq].fpgaIrq; - /* disable interupts on the FPGA INTC register */ + /* disable interrupts on the FPGA INTC register */ ctrl_outl(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTDSB_REG); } @@ -125,7 +125,7 @@ static void enable_microdev_irq(unsigned int irq) priorities |= MICRODEV_FPGA_INTPRI_LEVEL(fpgaIrq, pri); ctrl_outl(priorities, priorityReg); - /* enable interupts on the FPGA INTC register */ + /* enable interrupts on the FPGA INTC register */ ctrl_outl(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTENB_REG); } @@ -152,7 +152,7 @@ extern void __init init_microdev_irq(void) { int i; - /* disable interupts on the FPGA INTC register */ + /* disable interrupts on the FPGA INTC register */ ctrl_outl(~0ul, MICRODEV_FPGA_INTDSB_REG); for (i = 0; i < NUM_EXTERNAL_IRQS; i++) diff --git a/arch/sh/boards/superh/microdev/setup.c b/arch/sh/boards/superh/microdev/setup.c index 031c814e6e7631..6396cea1c89653 100644 --- a/arch/sh/boards/superh/microdev/setup.c +++ b/arch/sh/boards/superh/microdev/setup.c @@ -349,7 +349,7 @@ static int __init smsc_superio_setup(void) SMSC_WRITE_INDEXED(0x00, 0xc7); /* GP47 = nIOWOP */ SMSC_WRITE_INDEXED(0x08, 0xe8); /* GP20 = nIDE2_OE */ - /* Exit the configuraton state */ + /* Exit the configuration state */ outb(SMSC_EXIT_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR); return 0; diff --git a/arch/sh/boards/unknown/setup.c b/arch/sh/boards/unknown/setup.c index 1c941370a2e32a..bee4612de59b47 100644 --- a/arch/sh/boards/unknown/setup.c +++ b/arch/sh/boards/unknown/setup.c @@ -6,7 +6,7 @@ * May be copied or modified under the terms of the GNU General Public * License. See linux/COPYING for more information. * - * Setup code for an unknown machine (internal peripherials only) + * Setup code for an unknown machine (internal peripherals only) * * This is the simplest of all boards, and serves only as a quick and dirty * method to start debugging a new board during bring-up until proper board diff --git a/arch/sh/drivers/dma/dma-api.c b/arch/sh/drivers/dma/dma-api.c index e062067edd243f..8057a27a1bc6bb 100644 --- a/arch/sh/drivers/dma/dma-api.c +++ b/arch/sh/drivers/dma/dma-api.c @@ -115,7 +115,7 @@ static int search_cap(const char **haystack, const char *needle) /** * request_dma_bycap - Allocate a DMA channel based on its capabilities * @dmac: List of DMA controllers to search - * @caps: List of capabilites + * @caps: List of capabilities * * Search all channels of all DMA controllers to find a channel which * matches the requested capabilities. The result is the channel diff --git a/arch/sh/drivers/dma/dma-isa.c b/arch/sh/drivers/dma/dma-isa.c index 05a74ffdb68d4a..5fb044b791c37e 100644 --- a/arch/sh/drivers/dma/dma-isa.c +++ b/arch/sh/drivers/dma/dma-isa.c @@ -28,7 +28,7 @@ * NOTE: ops->xfer() is the preferred way of doing things. However, there * are some users of the ISA DMA API that exist in common code that we * don't necessarily want to go out of our way to break, so we still - * allow for some compatability at that level. Any new code is strongly + * allow for some compatibility at that level. Any new code is strongly * advised to run far away from the ISA DMA API and use the SH DMA API * directly. */ diff --git a/arch/sh/drivers/dma/dmabrg.c b/arch/sh/drivers/dma/dmabrg.c index 9d0a29370f2177..5e22689c2fcfd5 100644 --- a/arch/sh/drivers/dma/dmabrg.c +++ b/arch/sh/drivers/dma/dmabrg.c @@ -33,7 +33,7 @@ * 9 | HAC1/SSI1 | rec | half done | DMABRGI2 * * all can be enabled/disabled in the DMABRGCR register, - * as well as checked if they occured. + * as well as checked if they occurred. * * DMABRGI0 services USB DMA Address errors, but it still must be * enabled/acked in the DMABRGCR register. USB-DMA complete indicator diff --git a/arch/sh/drivers/pci/ops-dreamcast.c b/arch/sh/drivers/pci/ops-dreamcast.c index 381306cf54253e..e1284fc693611a 100644 --- a/arch/sh/drivers/pci/ops-dreamcast.c +++ b/arch/sh/drivers/pci/ops-dreamcast.c @@ -57,7 +57,7 @@ struct pci_channel board_pci_channels[] = { * * Also, we could very easily support both Type 0 and Type 1 configurations * here, but since it doesn't seem that there is any such implementation in - * existance, we don't bother. + * existence, we don't bother. * * I suppose if someone actually gets around to ripping the chip out of * the BBA and hanging some more devices off of it, then this might be diff --git a/arch/sh/drivers/pci/pci-st40.c b/arch/sh/drivers/pci/pci-st40.c index d67656a44b15ee..543417ff8314c4 100644 --- a/arch/sh/drivers/pci/pci-st40.c +++ b/arch/sh/drivers/pci/pci-st40.c @@ -292,7 +292,7 @@ int __init st40pci_init(unsigned memStart, unsigned memSize) PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_IO); - /* Accesse to the 0xb0000000 -> 0xb6000000 area will go through to 0x10000000 -> 0x16000000 + /* Access to the 0xb0000000 -> 0xb6000000 area will go through to 0x10000000 -> 0x16000000 * on the PCI bus. This allows a nice 1-1 bus to phys mapping. */ @@ -315,7 +315,7 @@ int __init st40pci_init(unsigned memStart, unsigned memSize) ST40PCI_WRITE(CSR_MBAR0, 0); ST40PCI_WRITE(LSR0, 0x0fff0001); - /* ... and set up the initial incomming window to expose all of RAM */ + /* ... and set up the initial incoming window to expose all of RAM */ pci_set_rbar_region(7, memStart, memStart, memSize); /* Maximise timeout values */ @@ -473,7 +473,7 @@ static void pci_set_rbar_region(unsigned int region, unsigned long localAddr mask = r2p2(regionSize) - 0x10000; - /* Diable the region (in case currently in use, should never happen) */ + /* Disable the region (in case currently in use, should never happen) */ ST40PCI_WRITE_INDEXED(RSR, region, 0); /* Start of local address space to publish */ diff --git a/arch/sh/drivers/pci/pci-st40.h b/arch/sh/drivers/pci/pci-st40.h index d729e0c2d5fee6..cf0d35bd135cbc 100644 --- a/arch/sh/drivers/pci/pci-st40.h +++ b/arch/sh/drivers/pci/pci-st40.h @@ -4,7 +4,7 @@ * May be copied or modified under the terms of the GNU General Public * License. See linux/COPYING for more information. * - * Defintions for the ST40 PCI hardware. + * Definitions for the ST40 PCI hardware. */ #ifndef __PCI_ST40_H__ diff --git a/arch/sh/drivers/superhyway/ops-sh4-202.c b/arch/sh/drivers/superhyway/ops-sh4-202.c index a55c98a9052bd4..3b14bf860db607 100644 --- a/arch/sh/drivers/superhyway/ops-sh4-202.c +++ b/arch/sh/drivers/superhyway/ops-sh4-202.c @@ -130,7 +130,7 @@ static int sh4202_read_vcr(unsigned long base, struct superhyway_vcr_info *vcr) * Some modules (PBR and ePBR for instance) also appear to have * VCRL/VCRH flipped in the documentation, but on the SH4-202 * itself it appears that these are all consistently mapped with - * VCRH preceeding VCRL. + * VCRH preceding VCRL. * * Do not trust the documentation, for it is evil. */ diff --git a/arch/sh/kernel/cf-enabler.c b/arch/sh/kernel/cf-enabler.c index 0758d48147a059..849a9e191391de 100644 --- a/arch/sh/kernel/cf-enabler.c +++ b/arch/sh/kernel/cf-enabler.c @@ -31,7 +31,7 @@ */ #if defined(CONFIG_CPU_SH4) /* SH4 can't access PCMCIA interface through P2 area. - * we must remap it with appropreate attribute bit of the page set. + * we must remap it with appropriate attribute bit of the page set. * this part is based on Greg Banks' hd64465_ss.c implementation - Masahiro Abe */ #if defined(CONFIG_CF_AREA6) diff --git a/arch/sh/kernel/cpu/clock.c b/arch/sh/kernel/cpu/clock.c index 014f318f5a0515..63251549e9a8b2 100644 --- a/arch/sh/kernel/cpu/clock.c +++ b/arch/sh/kernel/cpu/clock.c @@ -278,6 +278,11 @@ arch_init_clk_ops(struct clk_ops **ops, int type) { } +void __init __attribute__ ((weak)) +arch_clk_init(void) +{ +} + static int show_clocks(char *buf, char **start, off_t off, int len, int *eof, void *data) { @@ -314,6 +319,8 @@ int __init clk_init(void) ret |= clk_register(clk); } + arch_clk_init(); + /* Kick the child clocks.. */ propagate_rate(&master_clk); propagate_rate(&bus_clk); diff --git a/arch/sh/kernel/cpu/irq/maskreg.c b/arch/sh/kernel/cpu/irq/maskreg.c index 492db31b3cab62..978992e367a5c8 100644 --- a/arch/sh/kernel/cpu/irq/maskreg.c +++ b/arch/sh/kernel/cpu/irq/maskreg.c @@ -38,7 +38,7 @@ static struct hw_interrupt_type maskreg_irq_type = { .end = end_maskreg_irq }; -/* actual implementatin */ +/* actual implementation */ static unsigned int startup_maskreg_irq(unsigned int irq) { enable_maskreg_irq(irq); diff --git a/arch/sh/kernel/cpu/sh4/fpu.c b/arch/sh/kernel/cpu/sh4/fpu.c index d61dd599169f97..c5a4fc77fa0622 100644 --- a/arch/sh/kernel/cpu/sh4/fpu.c +++ b/arch/sh/kernel/cpu/sh4/fpu.c @@ -138,7 +138,7 @@ restore_fpu(struct task_struct *tsk) /* * Load the FPU with signalling NANS. This bit pattern we're using * has the property that no matter wether considered as single or as - * double precission represents signaling NANS. + * double precision represents signaling NANS. */ static void diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7750.c b/arch/sh/kernel/cpu/sh4/setup-sh7750.c index 6f8f458912c7c5..03b14cf78ddf24 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh7750.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh7750.c @@ -106,6 +106,7 @@ static struct ipr_data sh7750_ipr_map[] = { { 38, 2, 8, 7 }, /* DMAC DMAE */ }; +#ifdef CONFIG_CPU_SUBTYPE_SH7751 static struct ipr_data sh7751_ipr_map[] = { { 44, 2, 8, 7 }, /* DMAC DMTE4 */ { 45, 2, 8, 7 }, /* DMAC DMTE5 */ @@ -117,6 +118,7 @@ static struct ipr_data sh7751_ipr_map[] = { /*{ 72, INTPRI00, 8, ? },*/ /* TMU3 TUNI */ /*{ 76, INTPRI00, 12, ? },*/ /* TMU4 TUNI */ }; +#endif static unsigned long ipr_offsets[] = { 0xffd00004UL, /* 0: IPRA */ diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c index 29090035bc5bd0..51b386d454deae 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c @@ -17,7 +17,6 @@ #include <asm/clock.h> #include <asm/freq.h> -#define SH7722_PLL_FREQ (32000000/8) #define N (-1) #define NM (-2) #define ROUND_NEAREST 0 @@ -141,28 +140,36 @@ static void adjust_clocks(int originate, int *l, unsigned long v[], */ static int divisors2[] = { 2, 3, 4, 5, 6, 8, 10, 12, 16, 20, 24, 32, 40 }; +static void master_clk_recalc(struct clk *clk) +{ + unsigned frqcr = ctrl_inl(FRQCR); + + clk->rate = CONFIG_SH_PCLK_FREQ * (((frqcr >> 24) & 0x1f) + 1); +} + static void master_clk_init(struct clk *clk) { - clk_set_rate(clk, clk_get_rate(clk)); + clk->parent = NULL; + clk->flags |= CLK_RATE_PROPAGATES; + clk->rate = CONFIG_SH_PCLK_FREQ; + master_clk_recalc(clk); } -static void master_clk_recalc(struct clk *clk) + +static void module_clk_recalc(struct clk *clk) { unsigned long frqcr = ctrl_inl(FRQCR); - clk->rate = CONFIG_SH_PCLK_FREQ * (1 + (frqcr >> 24 & 0xF)); + clk->rate = clk->parent->rate / (((frqcr >> 24) & 0x1f) + 1); } static int master_clk_setrate(struct clk *clk, unsigned long rate, int id) { - int div = rate / SH7722_PLL_FREQ; + int div = rate / clk->rate; int master_divs[] = { 2, 3, 4, 6, 8, 16 }; int index; unsigned long frqcr; - if (rate < SH7722_PLL_FREQ * 2) - return -EINVAL; - for (index = 1; index < ARRAY_SIZE(master_divs); index++) if (div >= master_divs[index - 1] && div < master_divs[index]) break; @@ -185,6 +192,10 @@ static struct clk_ops sh7722_master_clk_ops = { .set_rate = master_clk_setrate, }; +static struct clk_ops sh7722_module_clk_ops = { + .recalc = module_clk_recalc, +}; + struct frqcr_context { unsigned mask; unsigned shift; @@ -489,7 +500,7 @@ static void sh7722_siu_recalc(struct clk *clk) if (siu < 0) return /* siu */ ; - BUG_ON(siu > 1); + BUG_ON(siu > 2); r = ctrl_inl(sh7722_siu_regs[siu]); clk->rate = clk->parent->rate * 2 / divisors2[r & 0xF]; } @@ -571,7 +582,7 @@ static struct clk *sh7722_clocks[] = { */ struct clk_ops *onchip_ops[] = { &sh7722_master_clk_ops, - &sh7722_frqcr_clk_ops, + &sh7722_module_clk_ops, &sh7722_frqcr_clk_ops, &sh7722_frqcr_clk_ops, }; @@ -583,7 +594,7 @@ arch_init_clk_ops(struct clk_ops **ops, int type) *ops = onchip_ops[type]; } -int __init sh7722_clock_init(void) +int __init arch_clk_init(void) { struct clk *master; int i; @@ -597,4 +608,3 @@ int __init sh7722_clock_init(void) clk_put(master); return 0; } -arch_initcall(sh7722_clock_init); diff --git a/arch/sh/kernel/kgdb_stub.c b/arch/sh/kernel/kgdb_stub.c index a5323364cbca7c..edd1ec214e6d61 100644 --- a/arch/sh/kernel/kgdb_stub.c +++ b/arch/sh/kernel/kgdb_stub.c @@ -2,7 +2,7 @@ * May be copied or modified under the terms of the GNU General Public * License. See linux/COPYING for more information. * - * Containes extracts from code by Glenn Engel, Jim Kingdon, + * Contains extracts from code by Glenn Engel, Jim Kingdon, * David Grothe <dave@gcom.com>, Tigran Aivazian <tigran@sco.com>, * Amit S. Kale <akale@veritas.com>, William Gatliff <bgat@open-widgets.com>, * Ben Lee, Steve Chamberlain and Benoit Miller <fulg@iname.com>. @@ -85,7 +85,7 @@ * * Responses can be run-length encoded to save space. A '*' means that * the next character is an ASCII encoding giving a repeat count which - * stands for that many repititions of the character preceding the '*'. + * stands for that many repetitions of the character preceding the '*'. * The encoding is n+29, yielding a printable character where n >=3 * (which is where RLE starts to win). Don't use an n > 126. * diff --git a/arch/sh/kernel/process.c b/arch/sh/kernel/process.c index 6b4f5748d0be68..a11e2aa73cbc08 100644 --- a/arch/sh/kernel/process.c +++ b/arch/sh/kernel/process.c @@ -26,8 +26,6 @@ static int hlt_counter; int ubc_usercnt = 0; -#define HARD_IDLE_TIMEOUT (HZ / 3) - void (*pm_idle)(void); void (*pm_power_off)(void); EXPORT_SYMBOL(pm_power_off); @@ -44,16 +42,39 @@ void enable_hlt(void) } EXPORT_SYMBOL(enable_hlt); +static int __init nohlt_setup(char *__unused) +{ + hlt_counter = 1; + return 1; +} +__setup("nohlt", nohlt_setup); + +static int __init hlt_setup(char *__unused) +{ + hlt_counter = 0; + return 1; +} +__setup("hlt", hlt_setup); + void default_idle(void) { - if (!hlt_counter) - cpu_sleep(); - else - cpu_relax(); + if (!hlt_counter) { + clear_thread_flag(TIF_POLLING_NRFLAG); + smp_mb__after_clear_bit(); + set_bl_bit(); + while (!need_resched()) + cpu_sleep(); + clear_bl_bit(); + set_thread_flag(TIF_POLLING_NRFLAG); + } else + while (!need_resched()) + cpu_relax(); } void cpu_idle(void) { + set_thread_flag(TIF_POLLING_NRFLAG); + /* endless idle loop with no priority at all */ while (1) { void (*idle)(void) = pm_idle; diff --git a/arch/sh/kernel/syscalls.S b/arch/sh/kernel/syscalls.S index 4357d1a6358f61..7db1c2dc5992a1 100644 --- a/arch/sh/kernel/syscalls.S +++ b/arch/sh/kernel/syscalls.S @@ -355,3 +355,6 @@ ENTRY(sys_call_table) .long sys_getcpu .long sys_epoll_pwait .long sys_utimensat /* 320 */ + .long sys_signalfd + .long sys_timerfd + .long sys_eventfd diff --git a/arch/sh/kernel/traps.c b/arch/sh/kernel/traps.c index 3a197649cd83c6..5b75cb6f8f9baa 100644 --- a/arch/sh/kernel/traps.c +++ b/arch/sh/kernel/traps.c @@ -21,6 +21,7 @@ #include <linux/bug.h> #include <linux/debug_locks.h> #include <linux/kdebug.h> +#include <linux/kexec.h> #include <linux/limits.h> #include <asm/system.h> #include <asm/uaccess.h> @@ -101,6 +102,16 @@ void die(const char * str, struct pt_regs * regs, long err) bust_spinlocks(0); spin_unlock_irq(&die_lock); + + if (kexec_should_crash(current)) + crash_kexec(regs); + + if (in_interrupt()) + panic("Fatal exception in interrupt"); + + if (panic_on_oops) + panic("Fatal exception"); + do_exit(SIGSEGV); } @@ -513,7 +524,7 @@ static int handle_unaligned_access(u16 instruction, struct pt_regs *regs) * misaligned data access * access to >= 0x80000000 is user mode * Unfortuntaly we can't distinguish between instruction address error - * and data address errors caused by read acceses. + * and data address errors caused by read accesses. */ asmlinkage void do_address_error(struct pt_regs *regs, unsigned long writeaccess, diff --git a/arch/sh/kernel/vmlinux.lds.S b/arch/sh/kernel/vmlinux.lds.S index d83143cc5ca93d..4c5b57e9c3c1c4 100644 --- a/arch/sh/kernel/vmlinux.lds.S +++ b/arch/sh/kernel/vmlinux.lds.S @@ -22,7 +22,7 @@ SECTIONS *(.empty_zero_page) } = 0 .text : { - *(.text) + TEXT_TEXT SCHED_TEXT LOCK_TEXT *(.fixup) @@ -41,7 +41,7 @@ SECTIONS BUG_TABLE .data : { /* Data */ - *(.data) + DATA_DATA /* Align the initial ramdisk image (INITRD) on page boundaries. */ . = ALIGN(PAGE_SIZE); diff --git a/arch/sh/math-emu/math.c b/arch/sh/math-emu/math.c index 1efbac15ff4e4d..a38e1eed9e77ea 100644 --- a/arch/sh/math-emu/math.c +++ b/arch/sh/math-emu/math.c @@ -148,7 +148,7 @@ fmac(struct sh_fpu_soft_struct *fregs, struct pt_regs *regs, int m, int n) return 0; } -// to process fmov's extention (odd n for DR access XD). +// to process fmov's extension (odd n for DR access XD). #define FMOV_EXT(x) if(x&1) x+=16-1 static int diff --git a/arch/sh/mm/copy_page.S b/arch/sh/mm/copy_page.S index 397c94c97315d9..ae039f2da16271 100644 --- a/arch/sh/mm/copy_page.S +++ b/arch/sh/mm/copy_page.S @@ -129,6 +129,7 @@ ENTRY(__copy_user_page) rts nop #endif + .align 2 .Lpsz: .long PAGE_SIZE /* * __kernel_size_t __copy_user(void *to, const void *from, __kernel_size_t n); diff --git a/arch/sh/mm/fault.c b/arch/sh/mm/fault.c index 9207da67ff8a66..c878faa4ae4689 100644 --- a/arch/sh/mm/fault.c +++ b/arch/sh/mm/fault.c @@ -15,43 +15,11 @@ #include <linux/mm.h> #include <linux/hardirq.h> #include <linux/kprobes.h> -#include <linux/kdebug.h> #include <asm/system.h> #include <asm/mmu_context.h> #include <asm/tlbflush.h> #include <asm/kgdb.h> -#ifdef CONFIG_KPROBES -ATOMIC_NOTIFIER_HEAD(notify_page_fault_chain); - -/* Hook to register for page fault notifications */ -int register_page_fault_notifier(struct notifier_block *nb) -{ - return atomic_notifier_chain_register(¬ify_page_fault_chain, nb); -} - -int unregister_page_fault_notifier(struct notifier_block *nb) -{ - return atomic_notifier_chain_unregister(¬ify_page_fault_chain, nb); -} - -static inline int notify_page_fault(enum die_val val, struct pt_regs *regs, - int trap, int sig) -{ - struct die_args args = { - .regs = regs, - .trapnr = trap, - }; - return atomic_notifier_call_chain(¬ify_page_fault_chain, val, &args); -} -#else -static inline int notify_page_fault(enum die_val val, struct pt_regs *regs, - int trap, int sig) -{ - return NOTIFY_DONE; -} -#endif - /* * This routine handles page faults. It determines the address, * and the problem, and then passes it off to one of the appropriate @@ -69,11 +37,6 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, siginfo_t info; trace_hardirqs_on(); - - if (notify_page_fault(DIE_PAGE_FAULT, regs, - writeaccess, SIGSEGV) == NOTIFY_STOP) - return; - local_irq_enable(); #ifdef CONFIG_SH_KGDB @@ -285,7 +248,7 @@ asmlinkage int __kprobes __do_page_fault(struct pt_regs *regs, pte_t *pte; pte_t entry; struct mm_struct *mm = current->mm; - spinlock_t *ptl; + spinlock_t *ptl = NULL; int ret = 1; #ifdef CONFIG_SH_KGDB diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c index 8fe223a890ed4a..e0e644ff3204c3 100644 --- a/arch/sh/mm/init.c +++ b/arch/sh/mm/init.c @@ -12,6 +12,7 @@ #include <linux/init.h> #include <linux/bootmem.h> #include <linux/proc_fs.h> +#include <linux/pagemap.h> #include <linux/percpu.h> #include <linux/io.h> #include <asm/mmu_context.h> @@ -112,7 +113,7 @@ static void set_pte_phys(unsigned long addr, unsigned long phys, pgprot_t prot) * As a performance optimization, other platforms preserve the fixmap mapping * across a context switch, we don't presently do this, but this could be done * in a similar fashion as to the wired TLB interface that sh64 uses (by way - * of the memorry mapped UTLB configuration) -- this unfortunately forces us to + * of the memory mapped UTLB configuration) -- this unfortunately forces us to * give up a TLB entry for each mapping we want to preserve. While this may be * viable for a small number of fixmaps, it's not particularly useful for * everything and needs to be carefully evaluated. (ie, we may want this for diff --git a/arch/sh/mm/pmb.c b/arch/sh/mm/pmb.c index 02aae06527dc49..b6a5a338145bf4 100644 --- a/arch/sh/mm/pmb.c +++ b/arch/sh/mm/pmb.c @@ -3,7 +3,7 @@ * * Privileged Space Mapping Buffer (PMB) Support. * - * Copyright (C) 2005, 2006 Paul Mundt + * Copyright (C) 2005, 2006, 2007 Paul Mundt * * P1/P2 Section mapping definitions from map32.h, which was: * @@ -68,6 +68,32 @@ static inline unsigned long mk_pmb_data(unsigned int entry) return mk_pmb_entry(entry) | PMB_DATA; } +static DEFINE_SPINLOCK(pmb_list_lock); +static struct pmb_entry *pmb_list; + +static inline void pmb_list_add(struct pmb_entry *pmbe) +{ + struct pmb_entry **p, *tmp; + + p = &pmb_list; + while ((tmp = *p) != NULL) + p = &tmp->next; + + pmbe->next = tmp; + *p = pmbe; +} + +static inline void pmb_list_del(struct pmb_entry *pmbe) +{ + struct pmb_entry **p, *tmp; + + for (p = &pmb_list; (tmp = *p); p = &tmp->next) + if (tmp == pmbe) { + *p = tmp->next; + return; + } +} + struct pmb_entry *pmb_alloc(unsigned long vpn, unsigned long ppn, unsigned long flags) { @@ -81,11 +107,19 @@ struct pmb_entry *pmb_alloc(unsigned long vpn, unsigned long ppn, pmbe->ppn = ppn; pmbe->flags = flags; + spin_lock_irq(&pmb_list_lock); + pmb_list_add(pmbe); + spin_unlock_irq(&pmb_list_lock); + return pmbe; } void pmb_free(struct pmb_entry *pmbe) { + spin_lock_irq(&pmb_list_lock); + pmb_list_del(pmbe); + spin_unlock_irq(&pmb_list_lock); + kmem_cache_free(pmb_cache, pmbe); } @@ -167,31 +201,6 @@ void clear_pmb_entry(struct pmb_entry *pmbe) clear_bit(entry, &pmb_map); } -static DEFINE_SPINLOCK(pmb_list_lock); -static struct pmb_entry *pmb_list; - -static inline void pmb_list_add(struct pmb_entry *pmbe) -{ - struct pmb_entry **p, *tmp; - - p = &pmb_list; - while ((tmp = *p) != NULL) - p = &tmp->next; - - pmbe->next = tmp; - *p = pmbe; -} - -static inline void pmb_list_del(struct pmb_entry *pmbe) -{ - struct pmb_entry **p, *tmp; - - for (p = &pmb_list; (tmp = *p); p = &tmp->next) - if (tmp == pmbe) { - *p = tmp->next; - return; - } -} static struct { unsigned long size; @@ -283,25 +292,14 @@ void pmb_unmap(unsigned long addr) } while (pmbe); } -static void pmb_cache_ctor(void *pmb, struct kmem_cache *cachep, unsigned long flags) +static void pmb_cache_ctor(void *pmb, struct kmem_cache *cachep, + unsigned long flags) { struct pmb_entry *pmbe = pmb; memset(pmb, 0, sizeof(struct pmb_entry)); - spin_lock_irq(&pmb_list_lock); - pmbe->entry = PMB_NO_ENTRY; - pmb_list_add(pmbe); - - spin_unlock_irq(&pmb_list_lock); -} - -static void pmb_cache_dtor(void *pmb, struct kmem_cache *cachep, unsigned long flags) -{ - spin_lock_irq(&pmb_list_lock); - pmb_list_del(pmb); - spin_unlock_irq(&pmb_list_lock); } static int __init pmb_init(void) @@ -312,8 +310,7 @@ static int __init pmb_init(void) BUG_ON(unlikely(nr_entries >= NR_PMB_ENTRIES)); pmb_cache = kmem_cache_create("pmb", sizeof(struct pmb_entry), 0, - SLAB_PANIC, pmb_cache_ctor, - pmb_cache_dtor); + SLAB_PANIC, pmb_cache_ctor, NULL); jump_to_P2(); diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types index 554f801db67bdf..fb40f188aff93e 100644 --- a/arch/sh/tools/mach-types +++ b/arch/sh/tools/mach-types @@ -7,8 +7,11 @@ # SE SH_SOLUTION_ENGINE 7751SE SH_7751_SOLUTION_ENGINE +7722SE SH_7722_SOLUTION_ENGINE 7300SE SH_7300_SOLUTION_ENGINE 7343SE SH_7343_SOLUTION_ENGINE +7206SE SH_7206_SOLUTION_ENGINE +7619SE SH_7619_SOLUTION_ENGINE 7780SE SH_7780_SOLUTION_ENGINE 73180SE SH_73180_SOLUTION_ENGINE 7751SYSTEMH SH_7751_SYSTEMH @@ -31,5 +34,3 @@ R7785RP SH_R7785RP TITAN SH_TITAN SHMIN SH_SHMIN 7710VOIPGW SH_7710VOIPGW -7206SE SH_7206_SOLUTION_ENGINE -7619SE SH_7619_SOLUTION_ENGINE diff --git a/arch/sh64/kernel/vmlinux.lds.S b/arch/sh64/kernel/vmlinux.lds.S index 4f9616f39830f3..02aea86c5907cb 100644 --- a/arch/sh64/kernel/vmlinux.lds.S +++ b/arch/sh64/kernel/vmlinux.lds.S @@ -54,7 +54,7 @@ SECTIONS } = 0 .text : C_PHYS(.text) { - *(.text) + TEXT_TEXT *(.text64) *(.text..SHmedia32) SCHED_TEXT @@ -78,7 +78,7 @@ SECTIONS _etext = .; /* End of text section */ .data : C_PHYS(.data) { /* Data */ - *(.data) + DATA_DATA CONSTRUCTORS } diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index bd992c0048f0aa..fbcc00c6c06ea6 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -178,6 +178,13 @@ config ARCH_HAS_ILOG2_U64 bool default n +config EMULATED_CMPXCHG + bool + default y + help + Sparc32 does not have a CAS instruction like sparc64. cmpxchg() + is emulated, and therefore it is not completely atomic. + config SUN_PM bool default y diff --git a/arch/sparc/kernel/time.c b/arch/sparc/kernel/time.c index f1401b57ccc709..7b4612da74a6ff 100644 --- a/arch/sparc/kernel/time.c +++ b/arch/sparc/kernel/time.c @@ -148,7 +148,7 @@ irqreturn_t timer_interrupt(int irq, void *dev_id) } /* Kick start a stopped clock (procedure from the Sun NVRAM/hostid FAQ). */ -static void __init kick_start_clock(void) +static void __devinit kick_start_clock(void) { struct mostek48t02 *regs = (struct mostek48t02 *)mstk48t02_regs; unsigned char sec; @@ -223,7 +223,7 @@ static __inline__ int has_low_battery(void) return (data1 == data2); /* Was the write blocked? */ } -static void __init mostek_set_system_time(void) +static void __devinit mostek_set_system_time(void) { unsigned int year, mon, day, hour, min, sec; struct mostek48t02 *mregs; diff --git a/arch/sparc/kernel/vmlinux.lds.S b/arch/sparc/kernel/vmlinux.lds.S index f0bb6e60e6205e..f75a1b822789ec 100644 --- a/arch/sparc/kernel/vmlinux.lds.S +++ b/arch/sparc/kernel/vmlinux.lds.S @@ -12,7 +12,7 @@ SECTIONS .text 0xf0004000 : { _text = .; - *(.text) + TEXT_TEXT SCHED_TEXT LOCK_TEXT *(.gnu.warning) @@ -22,7 +22,7 @@ SECTIONS RODATA .data : { - *(.data) + DATA_DATA CONSTRUCTORS } .data1 : { *(.data1) } diff --git a/arch/sparc/lib/atomic32.c b/arch/sparc/lib/atomic32.c index 559335f4917d1d..617d29832e192f 100644 --- a/arch/sparc/lib/atomic32.c +++ b/arch/sparc/lib/atomic32.c @@ -2,6 +2,7 @@ * atomic32.c: 32-bit atomic_t implementation * * Copyright (C) 2004 Keith M Wesolowski + * Copyright (C) 2007 Kyle McMartin * * Based on asm-parisc/atomic.h Copyright (C) 2000 Philipp Rumpf */ @@ -117,3 +118,17 @@ unsigned long ___change_bit(unsigned long *addr, unsigned long mask) return old & mask; } EXPORT_SYMBOL(___change_bit); + +unsigned long __cmpxchg_u32(volatile u32 *ptr, u32 old, u32 new) +{ + unsigned long flags; + u32 prev; + + spin_lock_irqsave(ATOMIC_HASH(addr), flags); + if ((prev = *ptr) == old) + *ptr = new; + spin_unlock_irqrestore(ATOMIC_HASH(addr), flags); + + return (unsigned long)prev; +} +EXPORT_SYMBOL(__cmpxchg_u32); diff --git a/arch/sparc64/Kconfig b/arch/sparc64/Kconfig index 831781cab27182..bd00f89eed1ed3 100644 --- a/arch/sparc64/Kconfig +++ b/arch/sparc64/Kconfig @@ -147,10 +147,10 @@ config SMP If you don't know what to do here, say N. config NR_CPUS - int "Maximum number of CPUs (2-64)" - range 2 64 + int "Maximum number of CPUs (2-1024)" + range 2 1024 depends on SMP - default "32" + default "64" source "drivers/cpufreq/Kconfig" diff --git a/arch/sparc64/kernel/Makefile b/arch/sparc64/kernel/Makefile index 6bf6fb65bc2094..d8d19093d12fd0 100644 --- a/arch/sparc64/kernel/Makefile +++ b/arch/sparc64/kernel/Makefile @@ -8,11 +8,11 @@ EXTRA_CFLAGS := -Werror extra-y := head.o init_task.o vmlinux.lds obj-y := process.o setup.o cpu.o idprom.o \ - traps.o devices.o auxio.o una_asm.o \ + traps.o auxio.o una_asm.o \ irq.o ptrace.o time.o sys_sparc.o signal.o \ unaligned.o central.o pci.o starfire.o semaphore.o \ power.o sbus.o iommu_common.o sparc64_ksyms.o chmc.o \ - visemul.o prom.o of_device.o + visemul.o prom.o of_device.o hvapi.o sstate.o mdesc.o obj-$(CONFIG_STACKTRACE) += stacktrace.o obj-$(CONFIG_PCI) += ebus.o isa.o pci_common.o pci_iommu.o \ diff --git a/arch/sparc64/kernel/devices.c b/arch/sparc64/kernel/devices.c deleted file mode 100644 index 0e03c8e218cd01..00000000000000 --- a/arch/sparc64/kernel/devices.c +++ /dev/null @@ -1,196 +0,0 @@ -/* devices.c: Initial scan of the prom device tree for important - * Sparc device nodes which we need to find. - * - * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu) - */ - -#include <linux/kernel.h> -#include <linux/threads.h> -#include <linux/init.h> -#include <linux/ioport.h> -#include <linux/string.h> -#include <linux/spinlock.h> -#include <linux/errno.h> -#include <linux/bootmem.h> - -#include <asm/page.h> -#include <asm/oplib.h> -#include <asm/system.h> -#include <asm/smp.h> -#include <asm/spitfire.h> -#include <asm/timer.h> -#include <asm/cpudata.h> - -/* Used to synchronize accesses to NatSemi SUPER I/O chip configure - * operations in asm/ns87303.h - */ -DEFINE_SPINLOCK(ns87303_lock); - -extern void cpu_probe(void); -extern void central_probe(void); - -static const char *cpu_mid_prop(void) -{ - if (tlb_type == spitfire) - return "upa-portid"; - return "portid"; -} - -static int get_cpu_mid(struct device_node *dp) -{ - struct property *prop; - - if (tlb_type == hypervisor) { - struct linux_prom64_registers *reg; - int len; - - prop = of_find_property(dp, "cpuid", &len); - if (prop && len == 4) - return *(int *) prop->value; - - prop = of_find_property(dp, "reg", NULL); - reg = prop->value; - return (reg[0].phys_addr >> 32) & 0x0fffffffUL; - } else { - const char *prop_name = cpu_mid_prop(); - - prop = of_find_property(dp, prop_name, NULL); - if (prop) - return *(int *) prop->value; - return 0; - } -} - -static int check_cpu_node(struct device_node *dp, int *cur_inst, - int (*compare)(struct device_node *, int, void *), - void *compare_arg, - struct device_node **dev_node, int *mid) -{ - if (!compare(dp, *cur_inst, compare_arg)) { - if (dev_node) - *dev_node = dp; - if (mid) - *mid = get_cpu_mid(dp); - return 0; - } - - (*cur_inst)++; - - return -ENODEV; -} - -static int __cpu_find_by(int (*compare)(struct device_node *, int, void *), - void *compare_arg, - struct device_node **dev_node, int *mid) -{ - struct device_node *dp; - int cur_inst; - - cur_inst = 0; - for_each_node_by_type(dp, "cpu") { - int err = check_cpu_node(dp, &cur_inst, - compare, compare_arg, - dev_node, mid); - if (err == 0) - return 0; - } - - return -ENODEV; -} - -static int cpu_instance_compare(struct device_node *dp, int instance, void *_arg) -{ - int desired_instance = (int) (long) _arg; - - if (instance == desired_instance) - return 0; - return -ENODEV; -} - -int cpu_find_by_instance(int instance, struct device_node **dev_node, int *mid) -{ - return __cpu_find_by(cpu_instance_compare, (void *)(long)instance, - dev_node, mid); -} - -static int cpu_mid_compare(struct device_node *dp, int instance, void *_arg) -{ - int desired_mid = (int) (long) _arg; - int this_mid; - - this_mid = get_cpu_mid(dp); - if (this_mid == desired_mid) - return 0; - return -ENODEV; -} - -int cpu_find_by_mid(int mid, struct device_node **dev_node) -{ - return __cpu_find_by(cpu_mid_compare, (void *)(long)mid, - dev_node, NULL); -} - -void __init device_scan(void) -{ - /* FIX ME FAST... -DaveM */ - ioport_resource.end = 0xffffffffffffffffUL; - - prom_printf("Booting Linux...\n"); - -#ifndef CONFIG_SMP - { - struct device_node *dp; - int err, def; - - err = cpu_find_by_instance(0, &dp, NULL); - if (err) { - prom_printf("No cpu nodes, cannot continue\n"); - prom_halt(); - } - cpu_data(0).clock_tick = - of_getintprop_default(dp, "clock-frequency", 0); - - def = ((tlb_type == hypervisor) ? - (8 * 1024) : - (16 * 1024)); - cpu_data(0).dcache_size = of_getintprop_default(dp, - "dcache-size", - def); - - def = 32; - cpu_data(0).dcache_line_size = - of_getintprop_default(dp, "dcache-line-size", def); - - def = 16 * 1024; - cpu_data(0).icache_size = of_getintprop_default(dp, - "icache-size", - def); - - def = 32; - cpu_data(0).icache_line_size = - of_getintprop_default(dp, "icache-line-size", def); - - def = ((tlb_type == hypervisor) ? - (3 * 1024 * 1024) : - (4 * 1024 * 1024)); - cpu_data(0).ecache_size = of_getintprop_default(dp, - "ecache-size", - def); - - def = 64; - cpu_data(0).ecache_line_size = - of_getintprop_default(dp, "ecache-line-size", def); - printk("CPU[0]: Caches " - "D[sz(%d):line_sz(%d)] " - "I[sz(%d):line_sz(%d)] " - "E[sz(%d):line_sz(%d)]\n", - cpu_data(0).dcache_size, cpu_data(0).dcache_line_size, - cpu_data(0).icache_size, cpu_data(0).icache_line_size, - cpu_data(0).ecache_size, cpu_data(0).ecache_line_size); - } -#endif - - central_probe(); - - cpu_probe(); -} diff --git a/arch/sparc64/kernel/entry.S b/arch/sparc64/kernel/entry.S index c15a3edcb826d9..8f10dda0f5c026 100644 --- a/arch/sparc64/kernel/entry.S +++ b/arch/sparc64/kernel/entry.S @@ -1725,96 +1725,142 @@ real_hard_smp_processor_id: * returns %o0: sysino */ .globl sun4v_devino_to_sysino + .type sun4v_devino_to_sysino,#function sun4v_devino_to_sysino: mov HV_FAST_INTR_DEVINO2SYSINO, %o5 ta HV_FAST_TRAP retl mov %o1, %o0 + .size sun4v_devino_to_sysino, .-sun4v_devino_to_sysino /* %o0: sysino * * returns %o0: intr_enabled (HV_INTR_{DISABLED,ENABLED}) */ .globl sun4v_intr_getenabled + .type sun4v_intr_getenabled,#function sun4v_intr_getenabled: mov HV_FAST_INTR_GETENABLED, %o5 ta HV_FAST_TRAP retl mov %o1, %o0 + .size sun4v_intr_getenabled, .-sun4v_intr_getenabled /* %o0: sysino * %o1: intr_enabled (HV_INTR_{DISABLED,ENABLED}) */ .globl sun4v_intr_setenabled + .type sun4v_intr_setenabled,#function sun4v_intr_setenabled: mov HV_FAST_INTR_SETENABLED, %o5 ta HV_FAST_TRAP retl nop + .size sun4v_intr_setenabled, .-sun4v_intr_setenabled /* %o0: sysino * * returns %o0: intr_state (HV_INTR_STATE_*) */ .globl sun4v_intr_getstate + .type sun4v_intr_getstate,#function sun4v_intr_getstate: mov HV_FAST_INTR_GETSTATE, %o5 ta HV_FAST_TRAP retl mov %o1, %o0 + .size sun4v_intr_getstate, .-sun4v_intr_getstate /* %o0: sysino * %o1: intr_state (HV_INTR_STATE_*) */ .globl sun4v_intr_setstate + .type sun4v_intr_setstate,#function sun4v_intr_setstate: mov HV_FAST_INTR_SETSTATE, %o5 ta HV_FAST_TRAP retl nop + .size sun4v_intr_setstate, .-sun4v_intr_setstate /* %o0: sysino * * returns %o0: cpuid */ .globl sun4v_intr_gettarget + .type sun4v_intr_gettarget,#function sun4v_intr_gettarget: mov HV_FAST_INTR_GETTARGET, %o5 ta HV_FAST_TRAP retl mov %o1, %o0 + .size sun4v_intr_gettarget, .-sun4v_intr_gettarget /* %o0: sysino * %o1: cpuid */ .globl sun4v_intr_settarget + .type sun4v_intr_settarget,#function sun4v_intr_settarget: mov HV_FAST_INTR_SETTARGET, %o5 ta HV_FAST_TRAP retl nop + .size sun4v_intr_settarget, .-sun4v_intr_settarget - /* %o0: type - * %o1: queue paddr - * %o2: num queue entries + /* %o0: cpuid + * %o1: pc + * %o2: rtba + * %o3: arg0 * * returns %o0: status */ - .globl sun4v_cpu_qconf -sun4v_cpu_qconf: - mov HV_FAST_CPU_QCONF, %o5 + .globl sun4v_cpu_start + .type sun4v_cpu_start,#function +sun4v_cpu_start: + mov HV_FAST_CPU_START, %o5 ta HV_FAST_TRAP retl nop + .size sun4v_cpu_start, .-sun4v_cpu_start - /* returns %o0: status + /* %o0: cpuid + * + * returns %o0: status */ + .globl sun4v_cpu_stop + .type sun4v_cpu_stop,#function +sun4v_cpu_stop: + mov HV_FAST_CPU_STOP, %o5 + ta HV_FAST_TRAP + retl + nop + .size sun4v_cpu_stop, .-sun4v_cpu_stop + + /* returns %o0: status */ .globl sun4v_cpu_yield + .type sun4v_cpu_yield, #function sun4v_cpu_yield: mov HV_FAST_CPU_YIELD, %o5 ta HV_FAST_TRAP retl nop + .size sun4v_cpu_yield, .-sun4v_cpu_yield + + /* %o0: type + * %o1: queue paddr + * %o2: num queue entries + * + * returns %o0: status + */ + .globl sun4v_cpu_qconf + .type sun4v_cpu_qconf,#function +sun4v_cpu_qconf: + mov HV_FAST_CPU_QCONF, %o5 + ta HV_FAST_TRAP + retl + nop + .size sun4v_cpu_qconf, .-sun4v_cpu_qconf /* %o0: num cpus in cpu list * %o1: cpu list paddr @@ -1823,11 +1869,13 @@ sun4v_cpu_yield: * returns %o0: status */ .globl sun4v_cpu_mondo_send + .type sun4v_cpu_mondo_send,#function sun4v_cpu_mondo_send: mov HV_FAST_CPU_MONDO_SEND, %o5 ta HV_FAST_TRAP retl nop + .size sun4v_cpu_mondo_send, .-sun4v_cpu_mondo_send /* %o0: CPU ID * @@ -1835,6 +1883,7 @@ sun4v_cpu_mondo_send: * %o0: cpu state as HV_CPU_STATE_* */ .globl sun4v_cpu_state + .type sun4v_cpu_state,#function sun4v_cpu_state: mov HV_FAST_CPU_STATE, %o5 ta HV_FAST_TRAP @@ -1843,3 +1892,609 @@ sun4v_cpu_state: mov %o1, %o0 1: retl nop + .size sun4v_cpu_state, .-sun4v_cpu_state + + /* %o0: virtual address + * %o1: must be zero + * %o2: TTE + * %o3: HV_MMU_* flags + * + * returns %o0: status + */ + .globl sun4v_mmu_map_perm_addr + .type sun4v_mmu_map_perm_addr,#function +sun4v_mmu_map_perm_addr: + mov HV_FAST_MMU_MAP_PERM_ADDR, %o5 + ta HV_FAST_TRAP + retl + nop + .size sun4v_mmu_map_perm_addr, .-sun4v_mmu_map_perm_addr + + /* %o0: number of TSB descriptions + * %o1: TSB descriptions real address + * + * returns %o0: status + */ + .globl sun4v_mmu_tsb_ctx0 + .type sun4v_mmu_tsb_ctx0,#function +sun4v_mmu_tsb_ctx0: + mov HV_FAST_MMU_TSB_CTX0, %o5 + ta HV_FAST_TRAP + retl + nop + .size sun4v_mmu_tsb_ctx0, .-sun4v_mmu_tsb_ctx0 + + /* %o0: API group number + * %o1: pointer to unsigned long major number storage + * %o2: pointer to unsigned long minor number storage + * + * returns %o0: status + */ + .globl sun4v_get_version + .type sun4v_get_version,#function +sun4v_get_version: + mov HV_CORE_GET_VER, %o5 + mov %o1, %o3 + mov %o2, %o4 + ta HV_CORE_TRAP + stx %o1, [%o3] + retl + stx %o2, [%o4] + .size sun4v_get_version, .-sun4v_get_version + + /* %o0: API group number + * %o1: desired major number + * %o2: desired minor number + * %o3: pointer to unsigned long actual minor number storage + * + * returns %o0: status + */ + .globl sun4v_set_version + .type sun4v_set_version,#function +sun4v_set_version: + mov HV_CORE_SET_VER, %o5 + mov %o3, %o4 + ta HV_CORE_TRAP + retl + stx %o1, [%o4] + .size sun4v_set_version, .-sun4v_set_version + + /* %o0: pointer to unsigned long time + * + * returns %o0: status + */ + .globl sun4v_tod_get + .type sun4v_tod_get,#function +sun4v_tod_get: + mov %o0, %o4 + mov HV_FAST_TOD_GET, %o5 + ta HV_FAST_TRAP + stx %o1, [%o4] + retl + nop + .size sun4v_tod_get, .-sun4v_tod_get + + /* %o0: time + * + * returns %o0: status + */ + .globl sun4v_tod_set + .type sun4v_tod_set,#function +sun4v_tod_set: + mov HV_FAST_TOD_SET, %o5 + ta HV_FAST_TRAP + retl + nop + .size sun4v_tod_set, .-sun4v_tod_set + + /* %o0: pointer to unsigned long status + * + * returns %o0: signed character + */ + .globl sun4v_con_getchar + .type sun4v_con_getchar,#function +sun4v_con_getchar: + mov %o0, %o4 + mov HV_FAST_CONS_GETCHAR, %o5 + clr %o0 + clr %o1 + ta HV_FAST_TRAP + stx %o0, [%o4] + retl + sra %o1, 0, %o0 + .size sun4v_con_getchar, .-sun4v_con_getchar + + /* %o0: signed long character + * + * returns %o0: status + */ + .globl sun4v_con_putchar + .type sun4v_con_putchar,#function +sun4v_con_putchar: + mov HV_FAST_CONS_PUTCHAR, %o5 + ta HV_FAST_TRAP + retl + sra %o0, 0, %o0 + .size sun4v_con_putchar, .-sun4v_con_putchar + + /* %o0: buffer real address + * %o1: buffer size + * %o2: pointer to unsigned long bytes_read + * + * returns %o0: status + */ + .globl sun4v_con_read + .type sun4v_con_read,#function +sun4v_con_read: + mov %o2, %o4 + mov HV_FAST_CONS_READ, %o5 + ta HV_FAST_TRAP + brnz %o0, 1f + cmp %o1, -1 /* break */ + be,a,pn %icc, 1f + mov %o1, %o0 + cmp %o1, -2 /* hup */ + be,a,pn %icc, 1f + mov %o1, %o0 + stx %o1, [%o4] +1: retl + nop + .size sun4v_con_read, .-sun4v_con_read + + /* %o0: buffer real address + * %o1: buffer size + * %o2: pointer to unsigned long bytes_written + * + * returns %o0: status + */ + .globl sun4v_con_write + .type sun4v_con_write,#function +sun4v_con_write: + mov %o2, %o4 + mov HV_FAST_CONS_WRITE, %o5 + ta HV_FAST_TRAP + stx %o1, [%o4] + retl + nop + .size sun4v_con_write, .-sun4v_con_write + + /* %o0: soft state + * %o1: address of description string + * + * returns %o0: status + */ + .globl sun4v_mach_set_soft_state + .type sun4v_mach_set_soft_state,#function +sun4v_mach_set_soft_state: + mov HV_FAST_MACH_SET_SOFT_STATE, %o5 + ta HV_FAST_TRAP + retl + nop + .size sun4v_mach_set_soft_state, .-sun4v_mach_set_soft_state + + /* %o0: exit code + * + * Does not return. + */ + .globl sun4v_mach_exit + .type sun4v_mach_exit,#function +sun4v_mach_exit: + mov HV_FAST_MACH_EXIT, %o5 + ta HV_FAST_TRAP + retl + nop + .size sun4v_mach_exit, .-sun4v_mach_exit + + /* %o0: buffer real address + * %o1: buffer length + * %o2: pointer to unsigned long real_buf_len + * + * returns %o0: status + */ + .globl sun4v_mach_desc + .type sun4v_mach_desc,#function +sun4v_mach_desc: + mov %o2, %o4 + mov HV_FAST_MACH_DESC, %o5 + ta HV_FAST_TRAP + stx %o1, [%o4] + retl + nop + .size sun4v_mach_desc, .-sun4v_mach_desc + + /* %o0: new timeout in milliseconds + * %o1: pointer to unsigned long orig_timeout + * + * returns %o0: status + */ + .globl sun4v_mach_set_watchdog + .type sun4v_mach_set_watchdog,#function +sun4v_mach_set_watchdog: + mov %o1, %o4 + mov HV_FAST_MACH_SET_WATCHDOG, %o5 + ta HV_FAST_TRAP + stx %o1, [%o4] + retl + nop + .size sun4v_mach_set_watchdog, .-sun4v_mach_set_watchdog + + /* No inputs and does not return. */ + .globl sun4v_mach_sir + .type sun4v_mach_sir,#function +sun4v_mach_sir: + mov %o1, %o4 + mov HV_FAST_MACH_SIR, %o5 + ta HV_FAST_TRAP + stx %o1, [%o4] + retl + nop + .size sun4v_mach_sir, .-sun4v_mach_sir + + /* %o0: channel + * %o1: ra + * %o2: num_entries + * + * returns %o0: status + */ + .globl sun4v_ldc_tx_qconf + .type sun4v_ldc_tx_qconf,#function +sun4v_ldc_tx_qconf: + mov HV_FAST_LDC_TX_QCONF, %o5 + ta HV_FAST_TRAP + retl + nop + .size sun4v_ldc_tx_qconf, .-sun4v_ldc_tx_qconf + + /* %o0: channel + * %o1: pointer to unsigned long ra + * %o2: pointer to unsigned long num_entries + * + * returns %o0: status + */ + .globl sun4v_ldc_tx_qinfo + .type sun4v_ldc_tx_qinfo,#function +sun4v_ldc_tx_qinfo: + mov %o1, %g1 + mov %o2, %g2 + mov HV_FAST_LDC_TX_QINFO, %o5 + ta HV_FAST_TRAP + stx %o1, [%g1] + stx %o2, [%g2] + retl + nop + .size sun4v_ldc_tx_qinfo, .-sun4v_ldc_tx_qinfo + + /* %o0: channel + * %o1: pointer to unsigned long head_off + * %o2: pointer to unsigned long tail_off + * %o2: pointer to unsigned long chan_state + * + * returns %o0: status + */ + .globl sun4v_ldc_tx_get_state + .type sun4v_ldc_tx_get_state,#function +sun4v_ldc_tx_get_state: + mov %o1, %g1 + mov %o2, %g2 + mov %o3, %g3 + mov HV_FAST_LDC_TX_GET_STATE, %o5 + ta HV_FAST_TRAP + stx %o1, [%g1] + stx %o2, [%g2] + stx %o3, [%g3] + retl + nop + .size sun4v_ldc_tx_get_state, .-sun4v_ldc_tx_get_state + + /* %o0: channel + * %o1: tail_off + * + * returns %o0: status + */ + .globl sun4v_ldc_tx_set_qtail + .type sun4v_ldc_tx_set_qtail,#function +sun4v_ldc_tx_set_qtail: + mov HV_FAST_LDC_TX_SET_QTAIL, %o5 + ta HV_FAST_TRAP + retl + nop + .size sun4v_ldc_tx_set_qtail, .-sun4v_ldc_tx_set_qtail + + /* %o0: channel + * %o1: ra + * %o2: num_entries + * + * returns %o0: status + */ + .globl sun4v_ldc_rx_qconf + .type sun4v_ldc_rx_qconf,#function +sun4v_ldc_rx_qconf: + mov HV_FAST_LDC_RX_QCONF, %o5 + ta HV_FAST_TRAP + retl + nop + .size sun4v_ldc_rx_qconf, .-sun4v_ldc_rx_qconf + + /* %o0: channel + * %o1: pointer to unsigned long ra + * %o2: pointer to unsigned long num_entries + * + * returns %o0: status + */ + .globl sun4v_ldc_rx_qinfo + .type sun4v_ldc_rx_qinfo,#function +sun4v_ldc_rx_qinfo: + mov %o1, %g1 + mov %o2, %g2 + mov HV_FAST_LDC_RX_QINFO, %o5 + ta HV_FAST_TRAP + stx %o1, [%g1] + stx %o2, [%g2] + retl + nop + .size sun4v_ldc_rx_qinfo, .-sun4v_ldc_rx_qinfo + + /* %o0: channel + * %o1: pointer to unsigned long head_off + * %o2: pointer to unsigned long tail_off + * %o2: pointer to unsigned long chan_state + * + * returns %o0: status + */ + .globl sun4v_ldc_rx_get_state + .type sun4v_ldc_rx_get_state,#function +sun4v_ldc_rx_get_state: + mov %o1, %g1 + mov %o2, %g2 + mov %o3, %g3 + mov HV_FAST_LDC_RX_GET_STATE, %o5 + ta HV_FAST_TRAP + stx %o1, [%g1] + stx %o2, [%g2] + stx %o3, [%g3] + retl + nop + .size sun4v_ldc_rx_get_state, .-sun4v_ldc_rx_get_state + + /* %o0: channel + * %o1: head_off + * + * returns %o0: status + */ + .globl sun4v_ldc_rx_set_qhead + .type sun4v_ldc_rx_set_qhead,#function +sun4v_ldc_rx_set_qhead: + mov HV_FAST_LDC_RX_SET_QHEAD, %o5 + ta HV_FAST_TRAP + retl + nop + .size sun4v_ldc_rx_set_qhead, .-sun4v_ldc_rx_set_qhead + + /* %o0: channel + * %o1: ra + * %o2: num_entries + * + * returns %o0: status + */ + .globl sun4v_ldc_set_map_table + .type sun4v_ldc_set_map_table,#function +sun4v_ldc_set_map_table: + mov HV_FAST_LDC_SET_MAP_TABLE, %o5 + ta HV_FAST_TRAP + retl + nop + .size sun4v_ldc_set_map_table, .-sun4v_ldc_set_map_table + + /* %o0: channel + * %o1: pointer to unsigned long ra + * %o2: pointer to unsigned long num_entries + * + * returns %o0: status + */ + .globl sun4v_ldc_get_map_table + .type sun4v_ldc_get_map_table,#function +sun4v_ldc_get_map_table: + mov %o1, %g1 + mov %o2, %g2 + mov HV_FAST_LDC_GET_MAP_TABLE, %o5 + ta HV_FAST_TRAP + stx %o1, [%g1] + stx %o2, [%g2] + retl + nop + .size sun4v_ldc_get_map_table, .-sun4v_ldc_get_map_table + + /* %o0: channel + * %o1: dir_code + * %o2: tgt_raddr + * %o3: lcl_raddr + * %o4: len + * %o5: pointer to unsigned long actual_len + * + * returns %o0: status + */ + .globl sun4v_ldc_copy + .type sun4v_ldc_copy,#function +sun4v_ldc_copy: + mov %o5, %g1 + mov HV_FAST_LDC_COPY, %o5 + ta HV_FAST_TRAP + stx %o1, [%g1] + retl + nop + .size sun4v_ldc_copy, .-sun4v_ldc_copy + + /* %o0: channel + * %o1: cookie + * %o2: pointer to unsigned long ra + * %o3: pointer to unsigned long perm + * + * returns %o0: status + */ + .globl sun4v_ldc_mapin + .type sun4v_ldc_mapin,#function +sun4v_ldc_mapin: + mov %o2, %g1 + mov %o3, %g2 + mov HV_FAST_LDC_MAPIN, %o5 + ta HV_FAST_TRAP + stx %o1, [%g1] + stx %o2, [%g2] + retl + nop + .size sun4v_ldc_mapin, .-sun4v_ldc_mapin + + /* %o0: ra + * + * returns %o0: status + */ + .globl sun4v_ldc_unmap + .type sun4v_ldc_unmap,#function +sun4v_ldc_unmap: + mov HV_FAST_LDC_UNMAP, %o5 + ta HV_FAST_TRAP + retl + nop + .size sun4v_ldc_unmap, .-sun4v_ldc_unmap + + /* %o0: cookie + * %o1: mte_cookie + * + * returns %o0: status + */ + .globl sun4v_ldc_revoke + .type sun4v_ldc_revoke,#function +sun4v_ldc_revoke: + mov HV_FAST_LDC_REVOKE, %o5 + ta HV_FAST_TRAP + retl + nop + .size sun4v_ldc_revoke, .-sun4v_ldc_revoke + + /* %o0: device handle + * %o1: device INO + * %o2: pointer to unsigned long cookie + * + * returns %o0: status + */ + .globl sun4v_vintr_get_cookie + .type sun4v_vintr_get_cookie,#function +sun4v_vintr_get_cookie: + mov %o2, %g1 + mov HV_FAST_VINTR_GET_COOKIE, %o5 + ta HV_FAST_TRAP + stx %o1, [%g1] + retl + nop + .size sun4v_vintr_get_cookie, .-sun4v_vintr_get_cookie + + /* %o0: device handle + * %o1: device INO + * %o2: cookie + * + * returns %o0: status + */ + .globl sun4v_vintr_set_cookie + .type sun4v_vintr_set_cookie,#function +sun4v_vintr_set_cookie: + mov HV_FAST_VINTR_SET_COOKIE, %o5 + ta HV_FAST_TRAP + retl + nop + .size sun4v_vintr_set_cookie, .-sun4v_vintr_set_cookie + + /* %o0: device handle + * %o1: device INO + * %o2: pointer to unsigned long valid_state + * + * returns %o0: status + */ + .globl sun4v_vintr_get_valid + .type sun4v_vintr_get_valid,#function +sun4v_vintr_get_valid: + mov %o2, %g1 + mov HV_FAST_VINTR_GET_VALID, %o5 + ta HV_FAST_TRAP + stx %o1, [%g1] + retl + nop + .size sun4v_vintr_get_valid, .-sun4v_vintr_get_valid + + /* %o0: device handle + * %o1: device INO + * %o2: valid_state + * + * returns %o0: status + */ + .globl sun4v_vintr_set_valid + .type sun4v_vintr_set_valid,#function +sun4v_vintr_set_valid: + mov HV_FAST_VINTR_SET_VALID, %o5 + ta HV_FAST_TRAP + retl + nop + .size sun4v_vintr_set_valid, .-sun4v_vintr_set_valid + + /* %o0: device handle + * %o1: device INO + * %o2: pointer to unsigned long state + * + * returns %o0: status + */ + .globl sun4v_vintr_get_state + .type sun4v_vintr_get_state,#function +sun4v_vintr_get_state: + mov %o2, %g1 + mov HV_FAST_VINTR_GET_STATE, %o5 + ta HV_FAST_TRAP + stx %o1, [%g1] + retl + nop + .size sun4v_vintr_get_state, .-sun4v_vintr_get_state + + /* %o0: device handle + * %o1: device INO + * %o2: state + * + * returns %o0: status + */ + .globl sun4v_vintr_set_state + .type sun4v_vintr_set_state,#function +sun4v_vintr_set_state: + mov HV_FAST_VINTR_SET_STATE, %o5 + ta HV_FAST_TRAP + retl + nop + .size sun4v_vintr_set_state, .-sun4v_vintr_set_state + + /* %o0: device handle + * %o1: device INO + * %o2: pointer to unsigned long cpuid + * + * returns %o0: status + */ + .globl sun4v_vintr_get_target + .type sun4v_vintr_get_target,#function +sun4v_vintr_get_target: + mov %o2, %g1 + mov HV_FAST_VINTR_GET_TARGET, %o5 + ta HV_FAST_TRAP + stx %o1, [%g1] + retl + nop + .size sun4v_vintr_get_target, .-sun4v_vintr_get_target + + /* %o0: device handle + * %o1: device INO + * %o2: cpuid + * + * returns %o0: status + */ + .globl sun4v_vintr_set_target + .type sun4v_vintr_set_target,#function +sun4v_vintr_set_target: + mov HV_FAST_VINTR_SET_TARGET, %o5 + ta HV_FAST_TRAP + retl + nop + .size sun4v_vintr_set_target, .-sun4v_vintr_set_target diff --git a/arch/sparc64/kernel/head.S b/arch/sparc64/kernel/head.S index baea10a9819681..77259526cb152d 100644 --- a/arch/sparc64/kernel/head.S +++ b/arch/sparc64/kernel/head.S @@ -523,7 +523,7 @@ tlb_fixup_done: #else mov 0, %o0 #endif - stb %o0, [%g6 + TI_CPU] + sth %o0, [%g6 + TI_CPU] /* Off we go.... */ call start_kernel @@ -653,33 +653,54 @@ setup_tba: restore sparc64_boot_end: -#include "ktlb.S" -#include "tsb.S" #include "etrap.S" #include "rtrap.S" #include "winfixup.S" #include "entry.S" #include "sun4v_tlb_miss.S" #include "sun4v_ivec.S" +#include "ktlb.S" +#include "tsb.S" /* * The following skip makes sure the trap table in ttable.S is aligned * on a 32K boundary as required by the v9 specs for TBA register. * * We align to a 32K boundary, then we have the 32K kernel TSB, - * then the 32K aligned trap table. + * the 64K kernel 4MB TSB, and then the 32K aligned trap table. */ 1: .skip 0x4000 + _start - 1b +! 0x0000000000408000 + .globl swapper_tsb swapper_tsb: .skip (32 * 1024) -! 0x0000000000408000 + .globl swapper_4m_tsb +swapper_4m_tsb: + .skip (64 * 1024) + +! 0x0000000000420000 + /* Some care needs to be exercised if you try to move the + * location of the trap table relative to other things. For + * one thing there are br* instructions in some of the + * trap table entires which branch back to code in ktlb.S + * Those instructions can only handle a signed 16-bit + * displacement. + * + * There is a binutils bug (bugzilla #4558) which causes + * the relocation overflow checks for such instructions to + * not be done correctly. So bintuils will not notice the + * error and will instead write junk into the relocation and + * you'll have an unbootable kernel. + */ #include "ttable.S" +! 0x0000000000428000 + #include "systbls.S" .data diff --git a/arch/sparc64/kernel/hvapi.c b/arch/sparc64/kernel/hvapi.c new file mode 100644 index 00000000000000..f34f5d6181eff1 --- /dev/null +++ b/arch/sparc64/kernel/hvapi.c @@ -0,0 +1,192 @@ +/* hvapi.c: Hypervisor API management. + * + * Copyright (C) 2007 David S. Miller <davem@davemloft.net> + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> + +#include <asm/hypervisor.h> +#include <asm/oplib.h> +#include <asm/sstate.h> + +/* If the hypervisor indicates that the API setting + * calls are unsupported, by returning HV_EBADTRAP or + * HV_ENOTSUPPORTED, we assume that API groups with the + * PRE_API flag set are major 1 minor 0. + */ +struct api_info { + unsigned long group; + unsigned long major; + unsigned long minor; + unsigned int refcnt; + unsigned int flags; +#define FLAG_PRE_API 0x00000001 +}; + +static struct api_info api_table[] = { + { .group = HV_GRP_SUN4V, .flags = FLAG_PRE_API }, + { .group = HV_GRP_CORE, .flags = FLAG_PRE_API }, + { .group = HV_GRP_INTR, }, + { .group = HV_GRP_SOFT_STATE, }, + { .group = HV_GRP_PCI, .flags = FLAG_PRE_API }, + { .group = HV_GRP_LDOM, }, + { .group = HV_GRP_SVC_CHAN, .flags = FLAG_PRE_API }, + { .group = HV_GRP_NCS, .flags = FLAG_PRE_API }, + { .group = HV_GRP_NIAG_PERF, .flags = FLAG_PRE_API }, + { .group = HV_GRP_FIRE_PERF, }, + { .group = HV_GRP_DIAG, .flags = FLAG_PRE_API }, +}; + +static DEFINE_SPINLOCK(hvapi_lock); + +static struct api_info *__get_info(unsigned long group) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(api_table); i++) { + if (api_table[i].group == group) + return &api_table[i]; + } + return NULL; +} + +static void __get_ref(struct api_info *p) +{ + p->refcnt++; +} + +static void __put_ref(struct api_info *p) +{ + if (--p->refcnt == 0) { + unsigned long ignore; + + sun4v_set_version(p->group, 0, 0, &ignore); + p->major = p->minor = 0; + } +} + +/* Register a hypervisor API specification. It indicates the + * API group and desired major+minor. + * + * If an existing API registration exists '0' (success) will + * be returned if it is compatible with the one being registered. + * Otherwise a negative error code will be returned. + * + * Otherwise an attempt will be made to negotiate the requested + * API group/major/minor with the hypervisor, and errors returned + * if that does not succeed. + */ +int sun4v_hvapi_register(unsigned long group, unsigned long major, + unsigned long *minor) +{ + struct api_info *p; + unsigned long flags; + int ret; + + spin_lock_irqsave(&hvapi_lock, flags); + p = __get_info(group); + ret = -EINVAL; + if (p) { + if (p->refcnt) { + ret = -EINVAL; + if (p->major == major) { + *minor = p->minor; + ret = 0; + } + } else { + unsigned long actual_minor; + unsigned long hv_ret; + + hv_ret = sun4v_set_version(group, major, *minor, + &actual_minor); + ret = -EINVAL; + if (hv_ret == HV_EOK) { + *minor = actual_minor; + p->major = major; + p->minor = actual_minor; + ret = 0; + } else if (hv_ret == HV_EBADTRAP || + hv_ret == HV_ENOTSUPPORTED) { + if (p->flags & FLAG_PRE_API) { + if (major == 1) { + p->major = 1; + p->minor = 0; + *minor = 0; + ret = 0; + } + } + } + } + + if (ret == 0) + __get_ref(p); + } + spin_unlock_irqrestore(&hvapi_lock, flags); + + return ret; +} +EXPORT_SYMBOL(sun4v_hvapi_register); + +void sun4v_hvapi_unregister(unsigned long group) +{ + struct api_info *p; + unsigned long flags; + + spin_lock_irqsave(&hvapi_lock, flags); + p = __get_info(group); + if (p) + __put_ref(p); + spin_unlock_irqrestore(&hvapi_lock, flags); +} +EXPORT_SYMBOL(sun4v_hvapi_unregister); + +int sun4v_hvapi_get(unsigned long group, + unsigned long *major, + unsigned long *minor) +{ + struct api_info *p; + unsigned long flags; + int ret; + + spin_lock_irqsave(&hvapi_lock, flags); + ret = -EINVAL; + p = __get_info(group); + if (p && p->refcnt) { + *major = p->major; + *minor = p->minor; + ret = 0; + } + spin_unlock_irqrestore(&hvapi_lock, flags); + + return ret; +} +EXPORT_SYMBOL(sun4v_hvapi_get); + +void __init sun4v_hvapi_init(void) +{ + unsigned long group, major, minor; + + group = HV_GRP_SUN4V; + major = 1; + minor = 0; + if (sun4v_hvapi_register(group, major, &minor)) + goto bad; + + group = HV_GRP_CORE; + major = 1; + minor = 1; + if (sun4v_hvapi_register(group, major, &minor)) + goto bad; + + sun4v_sstate_init(); + + return; + +bad: + prom_printf("HVAPI: Cannot register API group " + "%lx with major(%u) minor(%u)\n", + group, major, minor); + prom_halt(); +} diff --git a/arch/sparc64/kernel/irq.c b/arch/sparc64/kernel/irq.c index 3edc18e1b818da..a36f8dd0c0216e 100644 --- a/arch/sparc64/kernel/irq.c +++ b/arch/sparc64/kernel/irq.c @@ -171,8 +171,6 @@ skip: return 0; } -extern unsigned long real_hard_smp_processor_id(void); - static unsigned int sun4u_compute_tid(unsigned long imap, unsigned long cpuid) { unsigned int tid; @@ -694,9 +692,20 @@ void init_irqwork_curcpu(void) trap_block[cpu].irq_worklist = 0; } -static void __cpuinit register_one_mondo(unsigned long paddr, unsigned long type) +/* Please be very careful with register_one_mondo() and + * sun4v_register_mondo_queues(). + * + * On SMP this gets invoked from the CPU trampoline before + * the cpu has fully taken over the trap table from OBP, + * and it's kernel stack + %g6 thread register state is + * not fully cooked yet. + * + * Therefore you cannot make any OBP calls, not even prom_printf, + * from these two routines. + */ +static void __cpuinit register_one_mondo(unsigned long paddr, unsigned long type, unsigned long qmask) { - unsigned long num_entries = 128; + unsigned long num_entries = (qmask + 1) / 64; unsigned long status; status = sun4v_cpu_qconf(type, paddr, num_entries); @@ -711,44 +720,58 @@ static void __cpuinit sun4v_register_mondo_queues(int this_cpu) { struct trap_per_cpu *tb = &trap_block[this_cpu]; - register_one_mondo(tb->cpu_mondo_pa, HV_CPU_QUEUE_CPU_MONDO); - register_one_mondo(tb->dev_mondo_pa, HV_CPU_QUEUE_DEVICE_MONDO); - register_one_mondo(tb->resum_mondo_pa, HV_CPU_QUEUE_RES_ERROR); - register_one_mondo(tb->nonresum_mondo_pa, HV_CPU_QUEUE_NONRES_ERROR); + register_one_mondo(tb->cpu_mondo_pa, HV_CPU_QUEUE_CPU_MONDO, + tb->cpu_mondo_qmask); + register_one_mondo(tb->dev_mondo_pa, HV_CPU_QUEUE_DEVICE_MONDO, + tb->dev_mondo_qmask); + register_one_mondo(tb->resum_mondo_pa, HV_CPU_QUEUE_RES_ERROR, + tb->resum_qmask); + register_one_mondo(tb->nonresum_mondo_pa, HV_CPU_QUEUE_NONRES_ERROR, + tb->nonresum_qmask); } -static void __cpuinit alloc_one_mondo(unsigned long *pa_ptr, int use_bootmem) +static void __cpuinit alloc_one_mondo(unsigned long *pa_ptr, unsigned long qmask, int use_bootmem) { - void *page; + unsigned long size = PAGE_ALIGN(qmask + 1); + unsigned long order = get_order(size); + void *p = NULL; - if (use_bootmem) - page = alloc_bootmem_low_pages(PAGE_SIZE); - else - page = (void *) get_zeroed_page(GFP_ATOMIC); + if (use_bootmem) { + p = __alloc_bootmem_low(size, size, 0); + } else { + struct page *page = alloc_pages(GFP_ATOMIC | __GFP_ZERO, order); + if (page) + p = page_address(page); + } - if (!page) { + if (!p) { prom_printf("SUN4V: Error, cannot allocate mondo queue.\n"); prom_halt(); } - *pa_ptr = __pa(page); + *pa_ptr = __pa(p); } -static void __cpuinit alloc_one_kbuf(unsigned long *pa_ptr, int use_bootmem) +static void __cpuinit alloc_one_kbuf(unsigned long *pa_ptr, unsigned long qmask, int use_bootmem) { - void *page; + unsigned long size = PAGE_ALIGN(qmask + 1); + unsigned long order = get_order(size); + void *p = NULL; - if (use_bootmem) - page = alloc_bootmem_low_pages(PAGE_SIZE); - else - page = (void *) get_zeroed_page(GFP_ATOMIC); + if (use_bootmem) { + p = __alloc_bootmem_low(size, size, 0); + } else { + struct page *page = alloc_pages(GFP_ATOMIC | __GFP_ZERO, order); + if (page) + p = page_address(page); + } - if (!page) { + if (!p) { prom_printf("SUN4V: Error, cannot allocate kbuf page.\n"); prom_halt(); } - *pa_ptr = __pa(page); + *pa_ptr = __pa(p); } static void __cpuinit init_cpu_send_mondo_info(struct trap_per_cpu *tb, int use_bootmem) @@ -779,12 +802,12 @@ void __cpuinit sun4v_init_mondo_queues(int use_bootmem, int cpu, int alloc, int struct trap_per_cpu *tb = &trap_block[cpu]; if (alloc) { - alloc_one_mondo(&tb->cpu_mondo_pa, use_bootmem); - alloc_one_mondo(&tb->dev_mondo_pa, use_bootmem); - alloc_one_mondo(&tb->resum_mondo_pa, use_bootmem); - alloc_one_kbuf(&tb->resum_kernel_buf_pa, use_bootmem); - alloc_one_mondo(&tb->nonresum_mondo_pa, use_bootmem); - alloc_one_kbuf(&tb->nonresum_kernel_buf_pa, use_bootmem); + alloc_one_mondo(&tb->cpu_mondo_pa, tb->cpu_mondo_qmask, use_bootmem); + alloc_one_mondo(&tb->dev_mondo_pa, tb->dev_mondo_qmask, use_bootmem); + alloc_one_mondo(&tb->resum_mondo_pa, tb->resum_qmask, use_bootmem); + alloc_one_kbuf(&tb->resum_kernel_buf_pa, tb->resum_qmask, use_bootmem); + alloc_one_mondo(&tb->nonresum_mondo_pa, tb->nonresum_qmask, use_bootmem); + alloc_one_kbuf(&tb->nonresum_kernel_buf_pa, tb->nonresum_qmask, use_bootmem); init_cpu_send_mondo_info(tb, use_bootmem); } diff --git a/arch/sparc64/kernel/itlb_miss.S b/arch/sparc64/kernel/itlb_miss.S index ad46e2024f4b74..5a8377b54955b3 100644 --- a/arch/sparc64/kernel/itlb_miss.S +++ b/arch/sparc64/kernel/itlb_miss.S @@ -11,12 +11,12 @@ /* ITLB ** ICACHE line 2: TSB compare and TLB load */ bne,pn %xcc, tsb_miss_itlb ! Miss mov FAULT_CODE_ITLB, %g3 - andcc %g5, _PAGE_EXEC_4U, %g0 ! Executable? + sethi %hi(_PAGE_EXEC_4U), %g4 + andcc %g5, %g4, %g0 ! Executable? be,pn %xcc, tsb_do_fault nop ! Delay slot, fill me stxa %g5, [%g0] ASI_ITLB_DATA_IN ! Load TLB retry ! Trap done - nop /* ITLB ** ICACHE line 3: */ nop diff --git a/arch/sparc64/kernel/mdesc.c b/arch/sparc64/kernel/mdesc.c new file mode 100644 index 00000000000000..9246c2cf957476 --- /dev/null +++ b/arch/sparc64/kernel/mdesc.c @@ -0,0 +1,619 @@ +/* mdesc.c: Sun4V machine description handling. + * + * Copyright (C) 2007 David S. Miller <davem@davemloft.net> + */ +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/bootmem.h> +#include <linux/log2.h> + +#include <asm/hypervisor.h> +#include <asm/mdesc.h> +#include <asm/prom.h> +#include <asm/oplib.h> +#include <asm/smp.h> + +/* Unlike the OBP device tree, the machine description is a full-on + * DAG. An arbitrary number of ARCs are possible from one + * node to other nodes and thus we can't use the OBP device_node + * data structure to represent these nodes inside of the kernel. + * + * Actually, it isn't even a DAG, because there are back pointers + * which create cycles in the graph. + * + * mdesc_hdr and mdesc_elem describe the layout of the data structure + * we get from the Hypervisor. + */ +struct mdesc_hdr { + u32 version; /* Transport version */ + u32 node_sz; /* node block size */ + u32 name_sz; /* name block size */ + u32 data_sz; /* data block size */ +}; + +struct mdesc_elem { + u8 tag; +#define MD_LIST_END 0x00 +#define MD_NODE 0x4e +#define MD_NODE_END 0x45 +#define MD_NOOP 0x20 +#define MD_PROP_ARC 0x61 +#define MD_PROP_VAL 0x76 +#define MD_PROP_STR 0x73 +#define MD_PROP_DATA 0x64 + u8 name_len; + u16 resv; + u32 name_offset; + union { + struct { + u32 data_len; + u32 data_offset; + } data; + u64 val; + } d; +}; + +static struct mdesc_hdr *main_mdesc; +static struct mdesc_node *allnodes; + +static struct mdesc_node *allnodes_tail; +static unsigned int unique_id; + +static struct mdesc_node **mdesc_hash; +static unsigned int mdesc_hash_size; + +static inline unsigned int node_hashfn(u64 node) +{ + return ((unsigned int) (node ^ (node >> 8) ^ (node >> 16))) + & (mdesc_hash_size - 1); +} + +static inline void hash_node(struct mdesc_node *mp) +{ + struct mdesc_node **head = &mdesc_hash[node_hashfn(mp->node)]; + + mp->hash_next = *head; + *head = mp; + + if (allnodes_tail) { + allnodes_tail->allnodes_next = mp; + allnodes_tail = mp; + } else { + allnodes = allnodes_tail = mp; + } +} + +static struct mdesc_node *find_node(u64 node) +{ + struct mdesc_node *mp = mdesc_hash[node_hashfn(node)]; + + while (mp) { + if (mp->node == node) + return mp; + + mp = mp->hash_next; + } + return NULL; +} + +struct property *md_find_property(const struct mdesc_node *mp, + const char *name, + int *lenp) +{ + struct property *pp; + + for (pp = mp->properties; pp != 0; pp = pp->next) { + if (strcasecmp(pp->name, name) == 0) { + if (lenp) + *lenp = pp->length; + break; + } + } + return pp; +} +EXPORT_SYMBOL(md_find_property); + +/* + * Find a property with a given name for a given node + * and return the value. + */ +const void *md_get_property(const struct mdesc_node *mp, const char *name, + int *lenp) +{ + struct property *pp = md_find_property(mp, name, lenp); + return pp ? pp->value : NULL; +} +EXPORT_SYMBOL(md_get_property); + +struct mdesc_node *md_find_node_by_name(struct mdesc_node *from, + const char *name) +{ + struct mdesc_node *mp; + + mp = from ? from->allnodes_next : allnodes; + for (; mp != NULL; mp = mp->allnodes_next) { + if (strcmp(mp->name, name) == 0) + break; + } + return mp; +} +EXPORT_SYMBOL(md_find_node_by_name); + +static unsigned int mdesc_early_allocated; + +static void * __init mdesc_early_alloc(unsigned long size) +{ + void *ret; + + ret = __alloc_bootmem(size, SMP_CACHE_BYTES, 0UL); + if (ret == NULL) { + prom_printf("MDESC: alloc of %lu bytes failed.\n", size); + prom_halt(); + } + + memset(ret, 0, size); + + mdesc_early_allocated += size; + + return ret; +} + +static unsigned int __init count_arcs(struct mdesc_elem *ep) +{ + unsigned int ret = 0; + + ep++; + while (ep->tag != MD_NODE_END) { + if (ep->tag == MD_PROP_ARC) + ret++; + ep++; + } + return ret; +} + +static void __init mdesc_node_alloc(u64 node, struct mdesc_elem *ep, const char *names) +{ + unsigned int num_arcs = count_arcs(ep); + struct mdesc_node *mp; + + mp = mdesc_early_alloc(sizeof(*mp) + + (num_arcs * sizeof(struct mdesc_arc))); + mp->name = names + ep->name_offset; + mp->node = node; + mp->unique_id = unique_id++; + mp->num_arcs = num_arcs; + + hash_node(mp); +} + +static inline struct mdesc_elem *node_block(struct mdesc_hdr *mdesc) +{ + return (struct mdesc_elem *) (mdesc + 1); +} + +static inline void *name_block(struct mdesc_hdr *mdesc) +{ + return ((void *) node_block(mdesc)) + mdesc->node_sz; +} + +static inline void *data_block(struct mdesc_hdr *mdesc) +{ + return ((void *) name_block(mdesc)) + mdesc->name_sz; +} + +/* In order to avoid recursion (the graph can be very deep) we use a + * two pass algorithm. First we allocate all the nodes and hash them. + * Then we iterate over each node, filling in the arcs and properties. + */ +static void __init build_all_nodes(struct mdesc_hdr *mdesc) +{ + struct mdesc_elem *start, *ep; + struct mdesc_node *mp; + const char *names; + void *data; + u64 last_node; + + start = ep = node_block(mdesc); + last_node = mdesc->node_sz / 16; + + names = name_block(mdesc); + + while (1) { + u64 node = ep - start; + + if (ep->tag == MD_LIST_END) + break; + + if (ep->tag != MD_NODE) { + prom_printf("MDESC: Inconsistent element list.\n"); + prom_halt(); + } + + mdesc_node_alloc(node, ep, names); + + if (ep->d.val >= last_node) { + printk("MDESC: Warning, early break out of node scan.\n"); + printk("MDESC: Next node [%lu] last_node [%lu].\n", + node, last_node); + break; + } + + ep = start + ep->d.val; + } + + data = data_block(mdesc); + for (mp = allnodes; mp; mp = mp->allnodes_next) { + struct mdesc_elem *ep = start + mp->node; + struct property **link = &mp->properties; + unsigned int this_arc = 0; + + ep++; + while (ep->tag != MD_NODE_END) { + switch (ep->tag) { + case MD_PROP_ARC: { + struct mdesc_node *target; + + if (this_arc >= mp->num_arcs) { + prom_printf("MDESC: ARC overrun [%u:%u]\n", + this_arc, mp->num_arcs); + prom_halt(); + } + target = find_node(ep->d.val); + if (!target) { + printk("MDESC: Warning, arc points to " + "missing node, ignoring.\n"); + break; + } + mp->arcs[this_arc].name = + (names + ep->name_offset); + mp->arcs[this_arc].arc = target; + this_arc++; + break; + } + + case MD_PROP_VAL: + case MD_PROP_STR: + case MD_PROP_DATA: { + struct property *p = mdesc_early_alloc(sizeof(*p)); + + p->unique_id = unique_id++; + p->name = (char *) names + ep->name_offset; + if (ep->tag == MD_PROP_VAL) { + p->value = &ep->d.val; + p->length = 8; + } else { + p->value = data + ep->d.data.data_offset; + p->length = ep->d.data.data_len; + } + *link = p; + link = &p->next; + break; + } + + case MD_NOOP: + break; + + default: + printk("MDESC: Warning, ignoring unknown tag type %02x\n", + ep->tag); + } + ep++; + } + } +} + +static unsigned int __init count_nodes(struct mdesc_hdr *mdesc) +{ + struct mdesc_elem *ep = node_block(mdesc); + struct mdesc_elem *end; + unsigned int cnt = 0; + + end = ((void *)ep) + mdesc->node_sz; + while (ep < end) { + if (ep->tag == MD_NODE) + cnt++; + ep++; + } + return cnt; +} + +static void __init report_platform_properties(void) +{ + struct mdesc_node *pn = md_find_node_by_name(NULL, "platform"); + const char *s; + const u64 *v; + + if (!pn) { + prom_printf("No platform node in machine-description.\n"); + prom_halt(); + } + + s = md_get_property(pn, "banner-name", NULL); + printk("PLATFORM: banner-name [%s]\n", s); + s = md_get_property(pn, "name", NULL); + printk("PLATFORM: name [%s]\n", s); + + v = md_get_property(pn, "hostid", NULL); + if (v) + printk("PLATFORM: hostid [%08lx]\n", *v); + v = md_get_property(pn, "serial#", NULL); + if (v) + printk("PLATFORM: serial# [%08lx]\n", *v); + v = md_get_property(pn, "stick-frequency", NULL); + printk("PLATFORM: stick-frequency [%08lx]\n", *v); + v = md_get_property(pn, "mac-address", NULL); + if (v) + printk("PLATFORM: mac-address [%lx]\n", *v); + v = md_get_property(pn, "watchdog-resolution", NULL); + if (v) + printk("PLATFORM: watchdog-resolution [%lu ms]\n", *v); + v = md_get_property(pn, "watchdog-max-timeout", NULL); + if (v) + printk("PLATFORM: watchdog-max-timeout [%lu ms]\n", *v); + v = md_get_property(pn, "max-cpus", NULL); + if (v) + printk("PLATFORM: max-cpus [%lu]\n", *v); +} + +static int inline find_in_proplist(const char *list, const char *match, int len) +{ + while (len > 0) { + int l; + + if (!strcmp(list, match)) + return 1; + l = strlen(list) + 1; + list += l; + len -= l; + } + return 0; +} + +static void __init fill_in_one_cache(cpuinfo_sparc *c, struct mdesc_node *mp) +{ + const u64 *level = md_get_property(mp, "level", NULL); + const u64 *size = md_get_property(mp, "size", NULL); + const u64 *line_size = md_get_property(mp, "line-size", NULL); + const char *type; + int type_len; + + type = md_get_property(mp, "type", &type_len); + + switch (*level) { + case 1: + if (find_in_proplist(type, "instn", type_len)) { + c->icache_size = *size; + c->icache_line_size = *line_size; + } else if (find_in_proplist(type, "data", type_len)) { + c->dcache_size = *size; + c->dcache_line_size = *line_size; + } + break; + + case 2: + c->ecache_size = *size; + c->ecache_line_size = *line_size; + break; + + default: + break; + } + + if (*level == 1) { + unsigned int i; + + for (i = 0; i < mp->num_arcs; i++) { + struct mdesc_node *t = mp->arcs[i].arc; + + if (strcmp(mp->arcs[i].name, "fwd")) + continue; + + if (!strcmp(t->name, "cache")) + fill_in_one_cache(c, t); + } + } +} + +static void __init mark_core_ids(struct mdesc_node *mp, int core_id) +{ + unsigned int i; + + for (i = 0; i < mp->num_arcs; i++) { + struct mdesc_node *t = mp->arcs[i].arc; + const u64 *id; + + if (strcmp(mp->arcs[i].name, "back")) + continue; + + if (!strcmp(t->name, "cpu")) { + id = md_get_property(t, "id", NULL); + if (*id < NR_CPUS) + cpu_data(*id).core_id = core_id; + } else { + unsigned int j; + + for (j = 0; j < t->num_arcs; j++) { + struct mdesc_node *n = t->arcs[j].arc; + + if (strcmp(t->arcs[j].name, "back")) + continue; + + if (strcmp(n->name, "cpu")) + continue; + + id = md_get_property(n, "id", NULL); + if (*id < NR_CPUS) + cpu_data(*id).core_id = core_id; + } + } + } +} + +static void __init set_core_ids(void) +{ + struct mdesc_node *mp; + int idx; + + idx = 1; + md_for_each_node_by_name(mp, "cache") { + const u64 *level = md_get_property(mp, "level", NULL); + const char *type; + int len; + + if (*level != 1) + continue; + + type = md_get_property(mp, "type", &len); + if (!find_in_proplist(type, "instn", len)) + continue; + + mark_core_ids(mp, idx); + + idx++; + } +} + +static void __init get_one_mondo_bits(const u64 *p, unsigned int *mask, unsigned char def) +{ + u64 val; + + if (!p) + goto use_default; + val = *p; + + if (!val || val >= 64) + goto use_default; + + *mask = ((1U << val) * 64U) - 1U; + return; + +use_default: + *mask = ((1U << def) * 64U) - 1U; +} + +static void __init get_mondo_data(struct mdesc_node *mp, struct trap_per_cpu *tb) +{ + const u64 *val; + + val = md_get_property(mp, "q-cpu-mondo-#bits", NULL); + get_one_mondo_bits(val, &tb->cpu_mondo_qmask, 7); + + val = md_get_property(mp, "q-dev-mondo-#bits", NULL); + get_one_mondo_bits(val, &tb->dev_mondo_qmask, 7); + + val = md_get_property(mp, "q-resumable-#bits", NULL); + get_one_mondo_bits(val, &tb->resum_qmask, 6); + + val = md_get_property(mp, "q-nonresumable-#bits", NULL); + get_one_mondo_bits(val, &tb->nonresum_qmask, 2); +} + +static void __init mdesc_fill_in_cpu_data(void) +{ + struct mdesc_node *mp; + + ncpus_probed = 0; + md_for_each_node_by_name(mp, "cpu") { + const u64 *id = md_get_property(mp, "id", NULL); + const u64 *cfreq = md_get_property(mp, "clock-frequency", NULL); + struct trap_per_cpu *tb; + cpuinfo_sparc *c; + unsigned int i; + int cpuid; + + ncpus_probed++; + + cpuid = *id; + +#ifdef CONFIG_SMP + if (cpuid >= NR_CPUS) + continue; +#else + /* On uniprocessor we only want the values for the + * real physical cpu the kernel booted onto, however + * cpu_data() only has one entry at index 0. + */ + if (cpuid != real_hard_smp_processor_id()) + continue; + cpuid = 0; +#endif + + c = &cpu_data(cpuid); + c->clock_tick = *cfreq; + + tb = &trap_block[cpuid]; + get_mondo_data(mp, tb); + + for (i = 0; i < mp->num_arcs; i++) { + struct mdesc_node *t = mp->arcs[i].arc; + unsigned int j; + + if (strcmp(mp->arcs[i].name, "fwd")) + continue; + + if (!strcmp(t->name, "cache")) { + fill_in_one_cache(c, t); + continue; + } + + for (j = 0; j < t->num_arcs; j++) { + struct mdesc_node *n; + + n = t->arcs[j].arc; + if (strcmp(t->arcs[j].name, "fwd")) + continue; + + if (!strcmp(n->name, "cache")) + fill_in_one_cache(c, n); + } + } + +#ifdef CONFIG_SMP + cpu_set(cpuid, cpu_present_map); + cpu_set(cpuid, phys_cpu_present_map); +#endif + + c->core_id = 0; + } + + set_core_ids(); + + smp_fill_in_sib_core_maps(); +} + +void __init sun4v_mdesc_init(void) +{ + unsigned long len, real_len, status; + + (void) sun4v_mach_desc(0UL, 0UL, &len); + + printk("MDESC: Size is %lu bytes.\n", len); + + main_mdesc = mdesc_early_alloc(len); + + status = sun4v_mach_desc(__pa(main_mdesc), len, &real_len); + if (status != HV_EOK || real_len > len) { + prom_printf("sun4v_mach_desc fails, err(%lu), " + "len(%lu), real_len(%lu)\n", + status, len, real_len); + prom_halt(); + } + + len = count_nodes(main_mdesc); + printk("MDESC: %lu nodes.\n", len); + + len = roundup_pow_of_two(len); + + mdesc_hash = mdesc_early_alloc(len * sizeof(struct mdesc_node *)); + mdesc_hash_size = len; + + printk("MDESC: Hash size %lu entries.\n", len); + + build_all_nodes(main_mdesc); + + printk("MDESC: Built graph with %u bytes of memory.\n", + mdesc_early_allocated); + + report_platform_properties(); + mdesc_fill_in_cpu_data(); +} diff --git a/arch/sparc64/kernel/pci.c b/arch/sparc64/kernel/pci.c index d4c077dc5e857b..38a32bc95d22bb 100644 --- a/arch/sparc64/kernel/pci.c +++ b/arch/sparc64/kernel/pci.c @@ -306,6 +306,20 @@ static void __init pci_controller_probe(void) pci_controller_scan(pci_controller_init); } +static int ofpci_verbose; + +static int __init ofpci_debug(char *str) +{ + int val = 0; + + get_option(&str, &val); + if (val) + ofpci_verbose = 1; + return 1; +} + +__setup("ofpci_debug=", ofpci_debug); + static unsigned long pci_parse_of_flags(u32 addr0) { unsigned long flags = 0; @@ -337,7 +351,9 @@ static void pci_parse_of_addrs(struct of_device *op, addrs = of_get_property(node, "assigned-addresses", &proplen); if (!addrs) return; - printk(" parse addresses (%d bytes) @ %p\n", proplen, addrs); + if (ofpci_verbose) + printk(" parse addresses (%d bytes) @ %p\n", + proplen, addrs); op_res = &op->resource[0]; for (; proplen >= 20; proplen -= 20, addrs += 5, op_res++) { struct resource *res; @@ -348,8 +364,9 @@ static void pci_parse_of_addrs(struct of_device *op, if (!flags) continue; i = addrs[0] & 0xff; - printk(" start: %lx, end: %lx, i: %x\n", - op_res->start, op_res->end, i); + if (ofpci_verbose) + printk(" start: %lx, end: %lx, i: %x\n", + op_res->start, op_res->end, i); if (PCI_BASE_ADDRESS_0 <= i && i <= PCI_BASE_ADDRESS_5) { res = &dev->resource[(i - PCI_BASE_ADDRESS_0) >> 2]; @@ -393,8 +410,9 @@ struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm, if (type == NULL) type = ""; - printk(" create device, devfn: %x, type: %s hostcontroller(%d)\n", - devfn, type, host_controller); + if (ofpci_verbose) + printk(" create device, devfn: %x, type: %s\n", + devfn, type); dev->bus = bus; dev->sysdata = node; @@ -434,8 +452,9 @@ struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm, sprintf(pci_name(dev), "%04x:%02x:%02x.%d", pci_domain_nr(bus), dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn)); } - printk(" class: 0x%x device name: %s\n", - dev->class, pci_name(dev)); + if (ofpci_verbose) + printk(" class: 0x%x device name: %s\n", + dev->class, pci_name(dev)); /* I have seen IDE devices which will not respond to * the bmdma simplex check reads if bus mastering is @@ -469,7 +488,8 @@ struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm, } pci_parse_of_addrs(sd->op, node, dev); - printk(" adding to system ...\n"); + if (ofpci_verbose) + printk(" adding to system ...\n"); pci_device_add(dev, bus); @@ -547,7 +567,8 @@ static void __devinit of_scan_pci_bridge(struct pci_pbm_info *pbm, unsigned int flags; u64 size; - printk("of_scan_pci_bridge(%s)\n", node->full_name); + if (ofpci_verbose) + printk("of_scan_pci_bridge(%s)\n", node->full_name); /* parse bus-range property */ busrange = of_get_property(node, "bus-range", &len); @@ -632,7 +653,8 @@ static void __devinit of_scan_pci_bridge(struct pci_pbm_info *pbm, simba_cont: sprintf(bus->name, "PCI Bus %04x:%02x", pci_domain_nr(bus), bus->number); - printk(" bus name: %s\n", bus->name); + if (ofpci_verbose) + printk(" bus name: %s\n", bus->name); pci_of_scan_bus(pbm, node, bus); } @@ -646,12 +668,14 @@ static void __devinit pci_of_scan_bus(struct pci_pbm_info *pbm, int reglen, devfn; struct pci_dev *dev; - printk("PCI: scan_bus[%s] bus no %d\n", - node->full_name, bus->number); + if (ofpci_verbose) + printk("PCI: scan_bus[%s] bus no %d\n", + node->full_name, bus->number); child = NULL; while ((child = of_get_next_child(node, child)) != NULL) { - printk(" * %s\n", child->full_name); + if (ofpci_verbose) + printk(" * %s\n", child->full_name); reg = of_get_property(child, "reg", ®len); if (reg == NULL || reglen < 20) continue; @@ -661,7 +685,9 @@ static void __devinit pci_of_scan_bus(struct pci_pbm_info *pbm, dev = of_create_pci_dev(pbm, child, bus, devfn, 0); if (!dev) continue; - printk("PCI: dev header type: %x\n", dev->hdr_type); + if (ofpci_verbose) + printk("PCI: dev header type: %x\n", + dev->hdr_type); if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE || dev->hdr_type == PCI_HEADER_TYPE_CARDBUS) diff --git a/arch/sparc64/kernel/pci_sabre.c b/arch/sparc64/kernel/pci_sabre.c index e2377796de894e..323d6c278518fd 100644 --- a/arch/sparc64/kernel/pci_sabre.c +++ b/arch/sparc64/kernel/pci_sabre.c @@ -762,9 +762,10 @@ void sabre_init(struct device_node *dp, char *model_name) /* Of course, Sun has to encode things a thousand * different ways, inconsistently. */ - cpu_find_by_instance(0, &dp, NULL); - if (!strcmp(dp->name, "SUNW,UltraSPARC-IIe")) - hummingbird_p = 1; + for_each_node_by_type(dp, "cpu") { + if (!strcmp(dp->name, "SUNW,UltraSPARC-IIe")) + hummingbird_p = 1; + } } } diff --git a/arch/sparc64/kernel/pci_sun4v.c b/arch/sparc64/kernel/pci_sun4v.c index 044e8ec4c0f593..6b3fe2c1d65e99 100644 --- a/arch/sparc64/kernel/pci_sun4v.c +++ b/arch/sparc64/kernel/pci_sun4v.c @@ -12,6 +12,7 @@ #include <linux/percpu.h> #include <linux/irq.h> #include <linux/msi.h> +#include <linux/log2.h> #include <asm/iommu.h> #include <asm/irq.h> @@ -26,6 +27,9 @@ #include "pci_sun4v.h" +static unsigned long vpci_major = 1; +static unsigned long vpci_minor = 1; + #define PGLIST_NENTS (PAGE_SIZE / sizeof(u64)) struct iommu_batch { @@ -638,9 +642,8 @@ static void pci_sun4v_iommu_init(struct pci_pbm_info *pbm) { struct iommu *iommu = pbm->iommu; struct property *prop; - unsigned long num_tsb_entries, sz; + unsigned long num_tsb_entries, sz, tsbsize; u32 vdma[2], dma_mask, dma_offset; - int tsbsize; prop = of_find_property(pbm->prom_node, "virtual-dma", NULL); if (prop) { @@ -654,31 +657,15 @@ static void pci_sun4v_iommu_init(struct pci_pbm_info *pbm) vdma[1] = 0x80000000; } - dma_mask = vdma[0]; - switch (vdma[1]) { - case 0x20000000: - dma_mask |= 0x1fffffff; - tsbsize = 64; - break; - - case 0x40000000: - dma_mask |= 0x3fffffff; - tsbsize = 128; - break; - - case 0x80000000: - dma_mask |= 0x7fffffff; - tsbsize = 256; - break; - - default: - prom_printf("PCI-SUN4V: strange virtual-dma size.\n"); - prom_halt(); + if ((vdma[0] | vdma[1]) & ~IO_PAGE_MASK) { + prom_printf("PCI-SUN4V: strange virtual-dma[%08x:%08x].\n", + vdma[0], vdma[1]); + prom_halt(); }; - tsbsize *= (8 * 1024); - - num_tsb_entries = tsbsize / sizeof(iopte_t); + dma_mask = (roundup_pow_of_two(vdma[1]) - 1UL); + num_tsb_entries = vdma[1] / IO_PAGE_SIZE; + tsbsize = num_tsb_entries * sizeof(iopte_t); dma_offset = vdma[0]; @@ -689,7 +676,7 @@ static void pci_sun4v_iommu_init(struct pci_pbm_info *pbm) iommu->dma_addr_mask = dma_mask; /* Allocate and initialize the free area map. */ - sz = num_tsb_entries / 8; + sz = (num_tsb_entries + 7) / 8; sz = (sz + 7UL) & ~7UL; iommu->arena.map = kzalloc(sz, GFP_KERNEL); if (!iommu->arena.map) { @@ -1178,6 +1165,7 @@ static void pci_sun4v_pbm_init(struct pci_controller_info *p, struct device_node void sun4v_pci_init(struct device_node *dp, char *model_name) { + static int hvapi_negotiated = 0; struct pci_controller_info *p; struct pci_pbm_info *pbm; struct iommu *iommu; @@ -1186,6 +1174,20 @@ void sun4v_pci_init(struct device_node *dp, char *model_name) u32 devhandle; int i; + if (!hvapi_negotiated++) { + int err = sun4v_hvapi_register(HV_GRP_PCI, + vpci_major, + &vpci_minor); + + if (err) { + prom_printf("SUN4V_PCI: Could not register hvapi, " + "err=%d\n", err); + prom_halt(); + } + printk("SUN4V_PCI: Registered hvapi major[%lu] minor[%lu]\n", + vpci_major, vpci_minor); + } + prop = of_find_property(dp, "reg", NULL); regs = prop->value; diff --git a/arch/sparc64/kernel/power.c b/arch/sparc64/kernel/power.c index 699b24b890dfc5..5d6adea3967f32 100644 --- a/arch/sparc64/kernel/power.c +++ b/arch/sparc64/kernel/power.c @@ -19,6 +19,7 @@ #include <asm/prom.h> #include <asm/of_device.h> #include <asm/io.h> +#include <asm/sstate.h> #include <linux/unistd.h> @@ -53,6 +54,7 @@ static void (*poweroff_method)(void) = machine_alt_power_off; void machine_power_off(void) { + sstate_poweroff(); if (!serial_console || scons_pwroff) { #ifdef CONFIG_PCI if (power_reg) { diff --git a/arch/sparc64/kernel/process.c b/arch/sparc64/kernel/process.c index 952762bfb4c04c..f5f97e2c669c53 100644 --- a/arch/sparc64/kernel/process.c +++ b/arch/sparc64/kernel/process.c @@ -45,6 +45,7 @@ #include <asm/mmu_context.h> #include <asm/unistd.h> #include <asm/hypervisor.h> +#include <asm/sstate.h> /* #define VERBOSE_SHOWREGS */ @@ -106,6 +107,7 @@ extern void (*prom_keyboard)(void); void machine_halt(void) { + sstate_halt(); if (!serial_console && prom_palette) prom_palette (1); if (prom_keyboard) @@ -116,6 +118,7 @@ void machine_halt(void) void machine_alt_power_off(void) { + sstate_poweroff(); if (!serial_console && prom_palette) prom_palette(1); if (prom_keyboard) @@ -128,6 +131,7 @@ void machine_restart(char * cmd) { char *p; + sstate_reboot(); p = strchr (reboot_command, '\n'); if (p) *p = 0; if (!serial_console && prom_palette) diff --git a/arch/sparc64/kernel/prom.c b/arch/sparc64/kernel/prom.c index 02830e4671f582..dad4b3ba705f5a 100644 --- a/arch/sparc64/kernel/prom.c +++ b/arch/sparc64/kernel/prom.c @@ -28,6 +28,7 @@ #include <asm/irq.h> #include <asm/asi.h> #include <asm/upa.h> +#include <asm/smp.h> static struct device_node *allnodes; @@ -1665,6 +1666,150 @@ static struct device_node * __init build_tree(struct device_node *parent, phandl return ret; } +static const char *get_mid_prop(void) +{ + return (tlb_type == spitfire ? "upa-portid" : "portid"); +} + +struct device_node *of_find_node_by_cpuid(int cpuid) +{ + struct device_node *dp; + const char *mid_prop = get_mid_prop(); + + for_each_node_by_type(dp, "cpu") { + int id = of_getintprop_default(dp, mid_prop, -1); + const char *this_mid_prop = mid_prop; + + if (id < 0) { + this_mid_prop = "cpuid"; + id = of_getintprop_default(dp, this_mid_prop, -1); + } + + if (id < 0) { + prom_printf("OF: Serious problem, cpu lacks " + "%s property", this_mid_prop); + prom_halt(); + } + if (cpuid == id) + return dp; + } + return NULL; +} + +static void __init of_fill_in_cpu_data(void) +{ + struct device_node *dp; + const char *mid_prop = get_mid_prop(); + + ncpus_probed = 0; + for_each_node_by_type(dp, "cpu") { + int cpuid = of_getintprop_default(dp, mid_prop, -1); + const char *this_mid_prop = mid_prop; + struct device_node *portid_parent; + int portid = -1; + + portid_parent = NULL; + if (cpuid < 0) { + this_mid_prop = "cpuid"; + cpuid = of_getintprop_default(dp, this_mid_prop, -1); + if (cpuid >= 0) { + int limit = 2; + + portid_parent = dp; + while (limit--) { + portid_parent = portid_parent->parent; + if (!portid_parent) + break; + portid = of_getintprop_default(portid_parent, + "portid", -1); + if (portid >= 0) + break; + } + } + } + + if (cpuid < 0) { + prom_printf("OF: Serious problem, cpu lacks " + "%s property", this_mid_prop); + prom_halt(); + } + + ncpus_probed++; + +#ifdef CONFIG_SMP + if (cpuid >= NR_CPUS) + continue; +#else + /* On uniprocessor we only want the values for the + * real physical cpu the kernel booted onto, however + * cpu_data() only has one entry at index 0. + */ + if (cpuid != real_hard_smp_processor_id()) + continue; + cpuid = 0; +#endif + + cpu_data(cpuid).clock_tick = + of_getintprop_default(dp, "clock-frequency", 0); + + if (portid_parent) { + cpu_data(cpuid).dcache_size = + of_getintprop_default(dp, "l1-dcache-size", + 16 * 1024); + cpu_data(cpuid).dcache_line_size = + of_getintprop_default(dp, "l1-dcache-line-size", + 32); + cpu_data(cpuid).icache_size = + of_getintprop_default(dp, "l1-icache-size", + 8 * 1024); + cpu_data(cpuid).icache_line_size = + of_getintprop_default(dp, "l1-icache-line-size", + 32); + cpu_data(cpuid).ecache_size = + of_getintprop_default(dp, "l2-cache-size", 0); + cpu_data(cpuid).ecache_line_size = + of_getintprop_default(dp, "l2-cache-line-size", 0); + if (!cpu_data(cpuid).ecache_size || + !cpu_data(cpuid).ecache_line_size) { + cpu_data(cpuid).ecache_size = + of_getintprop_default(portid_parent, + "l2-cache-size", + (4 * 1024 * 1024)); + cpu_data(cpuid).ecache_line_size = + of_getintprop_default(portid_parent, + "l2-cache-line-size", 64); + } + + cpu_data(cpuid).core_id = portid + 1; + } else { + cpu_data(cpuid).dcache_size = + of_getintprop_default(dp, "dcache-size", 16 * 1024); + cpu_data(cpuid).dcache_line_size = + of_getintprop_default(dp, "dcache-line-size", 32); + + cpu_data(cpuid).icache_size = + of_getintprop_default(dp, "icache-size", 16 * 1024); + cpu_data(cpuid).icache_line_size = + of_getintprop_default(dp, "icache-line-size", 32); + + cpu_data(cpuid).ecache_size = + of_getintprop_default(dp, "ecache-size", + (4 * 1024 * 1024)); + cpu_data(cpuid).ecache_line_size = + of_getintprop_default(dp, "ecache-line-size", 64); + + cpu_data(cpuid).core_id = 0; + } + +#ifdef CONFIG_SMP + cpu_set(cpuid, cpu_present_map); + cpu_set(cpuid, phys_cpu_present_map); +#endif + } + + smp_fill_in_sib_core_maps(); +} + void __init prom_build_devicetree(void) { struct device_node **nextp; @@ -1679,4 +1824,7 @@ void __init prom_build_devicetree(void) &nextp); printk("PROM: Built device tree with %u bytes of memory.\n", prom_early_allocated); + + if (tlb_type != hypervisor) + of_fill_in_cpu_data(); } diff --git a/arch/sparc64/kernel/setup.c b/arch/sparc64/kernel/setup.c index 451028341c7559..de9b4c13f1c71d 100644 --- a/arch/sparc64/kernel/setup.c +++ b/arch/sparc64/kernel/setup.c @@ -46,11 +46,17 @@ #include <asm/sections.h> #include <asm/setup.h> #include <asm/mmu.h> +#include <asm/ns87303.h> #ifdef CONFIG_IP_PNP #include <net/ipconfig.h> #endif +/* Used to synchronize accesses to NatSemi SUPER I/O chip configure + * operations in asm/ns87303.h + */ +DEFINE_SPINLOCK(ns87303_lock); + struct screen_info screen_info = { 0, 0, /* orig-x, orig-y */ 0, /* unused */ @@ -269,6 +275,7 @@ void __init per_cpu_patch(void) void __init sun4v_patch(void) { + extern void sun4v_hvapi_init(void); struct sun4v_1insn_patch_entry *p1; struct sun4v_2insn_patch_entry *p2; @@ -300,6 +307,8 @@ void __init sun4v_patch(void) p2++; } + + sun4v_hvapi_init(); } #ifdef CONFIG_SMP @@ -367,8 +376,6 @@ void __init setup_arch(char **cmdline_p) init_cur_cpu_trap(current_thread_info()); paging_init(); - - smp_setup_cpu_possible_map(); } static int __init set_preferred_console(void) @@ -421,7 +428,7 @@ extern void mmu_info(struct seq_file *); unsigned int dcache_parity_tl1_occurred; unsigned int icache_parity_tl1_occurred; -static int ncpus_probed; +int ncpus_probed; static int show_cpuinfo(struct seq_file *m, void *__unused) { @@ -513,14 +520,6 @@ static int __init topology_init(void) err = -ENOMEM; - /* Count the number of physically present processors in - * the machine, even on uniprocessor, so that /proc/cpuinfo - * output is consistent with 2.4.x - */ - ncpus_probed = 0; - while (!cpu_find_by_instance(ncpus_probed, NULL, NULL)) - ncpus_probed++; - for_each_possible_cpu(i) { struct cpu *p = kzalloc(sizeof(*p), GFP_KERNEL); if (p) { diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c index 24fdf1d0adc512..c550bba3490a52 100644 --- a/arch/sparc64/kernel/smp.c +++ b/arch/sparc64/kernel/smp.c @@ -40,6 +40,7 @@ #include <asm/tlb.h> #include <asm/sections.h> #include <asm/prom.h> +#include <asm/mdesc.h> extern void calibrate_delay(void); @@ -75,53 +76,6 @@ void smp_bogo(struct seq_file *m) i, cpu_data(i).clock_tick); } -void __init smp_store_cpu_info(int id) -{ - struct device_node *dp; - int def; - - cpu_data(id).udelay_val = loops_per_jiffy; - - cpu_find_by_mid(id, &dp); - cpu_data(id).clock_tick = - of_getintprop_default(dp, "clock-frequency", 0); - - def = ((tlb_type == hypervisor) ? (8 * 1024) : (16 * 1024)); - cpu_data(id).dcache_size = - of_getintprop_default(dp, "dcache-size", def); - - def = 32; - cpu_data(id).dcache_line_size = - of_getintprop_default(dp, "dcache-line-size", def); - - def = 16 * 1024; - cpu_data(id).icache_size = - of_getintprop_default(dp, "icache-size", def); - - def = 32; - cpu_data(id).icache_line_size = - of_getintprop_default(dp, "icache-line-size", def); - - def = ((tlb_type == hypervisor) ? - (3 * 1024 * 1024) : - (4 * 1024 * 1024)); - cpu_data(id).ecache_size = - of_getintprop_default(dp, "ecache-size", def); - - def = 64; - cpu_data(id).ecache_line_size = - of_getintprop_default(dp, "ecache-line-size", def); - - printk("CPU[%d]: Caches " - "D[sz(%d):line_sz(%d)] " - "I[sz(%d):line_sz(%d)] " - "E[sz(%d):line_sz(%d)]\n", - id, - cpu_data(id).dcache_size, cpu_data(id).dcache_line_size, - cpu_data(id).icache_size, cpu_data(id).icache_line_size, - cpu_data(id).ecache_size, cpu_data(id).ecache_line_size); -} - extern void setup_sparc64_timer(void); static volatile unsigned long callin_flag = 0; @@ -145,7 +99,7 @@ void __init smp_callin(void) local_irq_enable(); calibrate_delay(); - smp_store_cpu_info(cpuid); + cpu_data(cpuid).udelay_val = loops_per_jiffy; callin_flag = 1; __asm__ __volatile__("membar #Sync\n\t" "flush %%g6" : : : "memory"); @@ -340,9 +294,8 @@ static int __devinit smp_boot_one_cpu(unsigned int cpu) prom_startcpu_cpuid(cpu, entry, cookie); } else { - struct device_node *dp; + struct device_node *dp = of_find_node_by_cpuid(cpu); - cpu_find_by_mid(cpu, &dp); prom_startcpu(dp->node, entry, cookie); } @@ -447,7 +400,7 @@ static __inline__ void spitfire_xcall_deliver(u64 data0, u64 data1, u64 data2, c static void cheetah_xcall_deliver(u64 data0, u64 data1, u64 data2, cpumask_t mask) { u64 pstate, ver; - int nack_busy_id, is_jbus; + int nack_busy_id, is_jbus, need_more; if (cpus_empty(mask)) return; @@ -463,6 +416,7 @@ static void cheetah_xcall_deliver(u64 data0, u64 data1, u64 data2, cpumask_t mas __asm__ __volatile__("rdpr %%pstate, %0" : "=r" (pstate)); retry: + need_more = 0; __asm__ __volatile__("wrpr %0, %1, %%pstate\n\t" : : "r" (pstate), "i" (PSTATE_IE)); @@ -491,6 +445,10 @@ retry: : /* no outputs */ : "r" (target), "i" (ASI_INTR_W)); nack_busy_id++; + if (nack_busy_id == 32) { + need_more = 1; + break; + } } } @@ -507,6 +465,16 @@ retry: if (dispatch_stat == 0UL) { __asm__ __volatile__("wrpr %0, 0x0, %%pstate" : : "r" (pstate)); + if (unlikely(need_more)) { + int i, cnt = 0; + for_each_cpu_mask(i, mask) { + cpu_clear(i, mask); + cnt++; + if (cnt == 32) + break; + } + goto retry; + } return; } if (!--stuck) @@ -544,6 +512,8 @@ retry: if ((dispatch_stat & check_mask) == 0) cpu_clear(i, mask); this_busy_nack += 2; + if (this_busy_nack == 64) + break; } goto retry; @@ -1191,23 +1161,14 @@ int setup_profiling_timer(unsigned int multiplier) static void __init smp_tune_scheduling(void) { - struct device_node *dp; - int instance; - unsigned int def, smallest = ~0U; - - def = ((tlb_type == hypervisor) ? - (3 * 1024 * 1024) : - (4 * 1024 * 1024)); + unsigned int smallest = ~0U; + int i; - instance = 0; - while (!cpu_find_by_instance(instance, &dp, NULL)) { - unsigned int val; + for (i = 0; i < NR_CPUS; i++) { + unsigned int val = cpu_data(i).ecache_size; - val = of_getintprop_default(dp, "ecache-size", def); - if (val < smallest) + if (val && val < smallest) smallest = val; - - instance++; } /* Any value less than 256K is nonsense. */ @@ -1230,58 +1191,42 @@ void __init smp_prepare_cpus(unsigned int max_cpus) int i; if (num_possible_cpus() > max_cpus) { - int instance, mid; - - instance = 0; - while (!cpu_find_by_instance(instance, NULL, &mid)) { - if (mid != boot_cpu_id) { - cpu_clear(mid, phys_cpu_present_map); - cpu_clear(mid, cpu_present_map); + for_each_possible_cpu(i) { + if (i != boot_cpu_id) { + cpu_clear(i, phys_cpu_present_map); + cpu_clear(i, cpu_present_map); if (num_possible_cpus() <= max_cpus) break; } - instance++; } } - for_each_possible_cpu(i) { - if (tlb_type == hypervisor) { - int j; - - /* XXX get this mapping from machine description */ - for_each_possible_cpu(j) { - if ((j >> 2) == (i >> 2)) - cpu_set(j, cpu_sibling_map[i]); - } - } else { - cpu_set(i, cpu_sibling_map[i]); - } - } - - smp_store_cpu_info(boot_cpu_id); + cpu_data(boot_cpu_id).udelay_val = loops_per_jiffy; smp_tune_scheduling(); } -/* Set this up early so that things like the scheduler can init - * properly. We use the same cpu mask for both the present and - * possible cpu map. - */ -void __init smp_setup_cpu_possible_map(void) +void __devinit smp_prepare_boot_cpu(void) { - int instance, mid; - - instance = 0; - while (!cpu_find_by_instance(instance, NULL, &mid)) { - if (mid < NR_CPUS) { - cpu_set(mid, phys_cpu_present_map); - cpu_set(mid, cpu_present_map); - } - instance++; - } } -void __devinit smp_prepare_boot_cpu(void) +void __devinit smp_fill_in_sib_core_maps(void) { + unsigned int i; + + for_each_possible_cpu(i) { + unsigned int j; + + if (cpu_data(i).core_id == 0) { + cpu_set(i, cpu_sibling_map[i]); + continue; + } + + for_each_possible_cpu(j) { + if (cpu_data(i).core_id == + cpu_data(j).core_id) + cpu_set(j, cpu_sibling_map[i]); + } + } } int __cpuinit __cpu_up(unsigned int cpu) @@ -1337,7 +1282,7 @@ unsigned long __per_cpu_shift __read_mostly; EXPORT_SYMBOL(__per_cpu_base); EXPORT_SYMBOL(__per_cpu_shift); -void __init setup_per_cpu_areas(void) +void __init real_setup_per_cpu_areas(void) { unsigned long goal, size, i; char *ptr; diff --git a/arch/sparc64/kernel/sstate.c b/arch/sparc64/kernel/sstate.c new file mode 100644 index 00000000000000..5b6e75b7f0526d --- /dev/null +++ b/arch/sparc64/kernel/sstate.c @@ -0,0 +1,104 @@ +/* sstate.c: System soft state support. + * + * Copyright (C) 2007 David S. Miller <davem@davemloft.net> + */ + +#include <linux/kernel.h> +#include <linux/notifier.h> +#include <linux/init.h> + +#include <asm/hypervisor.h> +#include <asm/sstate.h> +#include <asm/oplib.h> +#include <asm/head.h> +#include <asm/io.h> + +static int hv_supports_soft_state; + +static unsigned long kimage_addr_to_ra(const char *p) +{ + unsigned long val = (unsigned long) p; + + return kern_base + (val - KERNBASE); +} + +static void do_set_sstate(unsigned long state, const char *msg) +{ + unsigned long err; + + if (!hv_supports_soft_state) + return; + + err = sun4v_mach_set_soft_state(state, kimage_addr_to_ra(msg)); + if (err) { + printk(KERN_WARNING "SSTATE: Failed to set soft-state to " + "state[%lx] msg[%s], err=%lu\n", + state, msg, err); + } +} + +static const char booting_msg[32] __attribute__((aligned(32))) = + "Linux booting"; +static const char running_msg[32] __attribute__((aligned(32))) = + "Linux running"; +static const char halting_msg[32] __attribute__((aligned(32))) = + "Linux halting"; +static const char poweroff_msg[32] __attribute__((aligned(32))) = + "Linux powering off"; +static const char rebooting_msg[32] __attribute__((aligned(32))) = + "Linux rebooting"; +static const char panicing_msg[32] __attribute__((aligned(32))) = + "Linux panicing"; + +void sstate_booting(void) +{ + do_set_sstate(HV_SOFT_STATE_TRANSITION, booting_msg); +} + +void sstate_running(void) +{ + do_set_sstate(HV_SOFT_STATE_NORMAL, running_msg); +} + +void sstate_halt(void) +{ + do_set_sstate(HV_SOFT_STATE_TRANSITION, halting_msg); +} + +void sstate_poweroff(void) +{ + do_set_sstate(HV_SOFT_STATE_TRANSITION, poweroff_msg); +} + +void sstate_reboot(void) +{ + do_set_sstate(HV_SOFT_STATE_TRANSITION, rebooting_msg); +} + +static int sstate_panic_event(struct notifier_block *n, unsigned long event, void *ptr) +{ + do_set_sstate(HV_SOFT_STATE_TRANSITION, panicing_msg); + + return NOTIFY_DONE; +} + +static struct notifier_block sstate_panic_block = { + .notifier_call = sstate_panic_event, + .priority = INT_MAX, +}; + +void __init sun4v_sstate_init(void) +{ + unsigned long major, minor; + + major = 1; + minor = 0; + if (sun4v_hvapi_register(HV_GRP_SOFT_STATE, major, &minor)) + return; + + hv_supports_soft_state = 1; + + prom_sun4v_guest_soft_state(); + atomic_notifier_chain_register(&panic_notifier_list, + &sstate_panic_block); +} diff --git a/arch/sparc64/kernel/sun4v_ivec.S b/arch/sparc64/kernel/sun4v_ivec.S index 405855dd886bc9..574bc248bca6f9 100644 --- a/arch/sparc64/kernel/sun4v_ivec.S +++ b/arch/sparc64/kernel/sun4v_ivec.S @@ -22,12 +22,12 @@ sun4v_cpu_mondo: be,pn %xcc, sun4v_cpu_mondo_queue_empty nop - /* Get &trap_block[smp_processor_id()] into %g3. */ - ldxa [%g0] ASI_SCRATCHPAD, %g3 - sub %g3, TRAP_PER_CPU_FAULT_INFO, %g3 + /* Get &trap_block[smp_processor_id()] into %g4. */ + ldxa [%g0] ASI_SCRATCHPAD, %g4 + sub %g4, TRAP_PER_CPU_FAULT_INFO, %g4 /* Get CPU mondo queue base phys address into %g7. */ - ldx [%g3 + TRAP_PER_CPU_CPU_MONDO_PA], %g7 + ldx [%g4 + TRAP_PER_CPU_CPU_MONDO_PA], %g7 /* Now get the cross-call arguments and handler PC, same * layout as sun4u: @@ -47,8 +47,7 @@ sun4v_cpu_mondo: add %g2, 0x40 - 0x8 - 0x8, %g2 /* Update queue head pointer. */ - sethi %hi(8192 - 1), %g4 - or %g4, %lo(8192 - 1), %g4 + lduw [%g4 + TRAP_PER_CPU_CPU_MONDO_QMASK], %g4 and %g2, %g4, %g2 mov INTRQ_CPU_MONDO_HEAD, %g4 @@ -71,12 +70,12 @@ sun4v_dev_mondo: be,pn %xcc, sun4v_dev_mondo_queue_empty nop - /* Get &trap_block[smp_processor_id()] into %g3. */ - ldxa [%g0] ASI_SCRATCHPAD, %g3 - sub %g3, TRAP_PER_CPU_FAULT_INFO, %g3 + /* Get &trap_block[smp_processor_id()] into %g4. */ + ldxa [%g0] ASI_SCRATCHPAD, %g4 + sub %g4, TRAP_PER_CPU_FAULT_INFO, %g4 /* Get DEV mondo queue base phys address into %g5. */ - ldx [%g3 + TRAP_PER_CPU_DEV_MONDO_PA], %g5 + ldx [%g4 + TRAP_PER_CPU_DEV_MONDO_PA], %g5 /* Load IVEC into %g3. */ ldxa [%g5 + %g2] ASI_PHYS_USE_EC, %g3 @@ -90,8 +89,7 @@ sun4v_dev_mondo: */ /* Update queue head pointer, this frees up some registers. */ - sethi %hi(8192 - 1), %g4 - or %g4, %lo(8192 - 1), %g4 + lduw [%g4 + TRAP_PER_CPU_DEV_MONDO_QMASK], %g4 and %g2, %g4, %g2 mov INTRQ_DEVICE_MONDO_HEAD, %g4 @@ -143,6 +141,8 @@ sun4v_res_mondo: brnz,pn %g1, sun4v_res_mondo_queue_full nop + lduw [%g3 + TRAP_PER_CPU_RESUM_QMASK], %g4 + /* Remember this entry's offset in %g1. */ mov %g2, %g1 @@ -173,8 +173,6 @@ sun4v_res_mondo: add %g2, 0x08, %g2 /* Update queue head pointer. */ - sethi %hi(8192 - 1), %g4 - or %g4, %lo(8192 - 1), %g4 and %g2, %g4, %g2 mov INTRQ_RESUM_MONDO_HEAD, %g4 @@ -254,6 +252,8 @@ sun4v_nonres_mondo: brnz,pn %g1, sun4v_nonres_mondo_queue_full nop + lduw [%g3 + TRAP_PER_CPU_NONRESUM_QMASK], %g4 + /* Remember this entry's offset in %g1. */ mov %g2, %g1 @@ -284,8 +284,6 @@ sun4v_nonres_mondo: add %g2, 0x08, %g2 /* Update queue head pointer. */ - sethi %hi(8192 - 1), %g4 - or %g4, %lo(8192 - 1), %g4 and %g2, %g4, %g2 mov INTRQ_NONRESUM_MONDO_HEAD, %g4 diff --git a/arch/sparc64/kernel/time.c b/arch/sparc64/kernel/time.c index 6b9a06e425423e..a31a0439244f38 100644 --- a/arch/sparc64/kernel/time.c +++ b/arch/sparc64/kernel/time.c @@ -680,22 +680,14 @@ static int starfire_set_time(u32 val) static u32 hypervisor_get_time(void) { - register unsigned long func asm("%o5"); - register unsigned long arg0 asm("%o0"); - register unsigned long arg1 asm("%o1"); + unsigned long ret, time; int retries = 10000; retry: - func = HV_FAST_TOD_GET; - arg0 = 0; - arg1 = 0; - __asm__ __volatile__("ta %6" - : "=&r" (func), "=&r" (arg0), "=&r" (arg1) - : "0" (func), "1" (arg0), "2" (arg1), - "i" (HV_FAST_TRAP)); - if (arg0 == HV_EOK) - return arg1; - if (arg0 == HV_EWOULDBLOCK) { + ret = sun4v_tod_get(&time); + if (ret == HV_EOK) + return time; + if (ret == HV_EWOULDBLOCK) { if (--retries > 0) { udelay(100); goto retry; @@ -709,20 +701,14 @@ retry: static int hypervisor_set_time(u32 secs) { - register unsigned long func asm("%o5"); - register unsigned long arg0 asm("%o0"); + unsigned long ret; int retries = 10000; retry: - func = HV_FAST_TOD_SET; - arg0 = secs; - __asm__ __volatile__("ta %4" - : "=&r" (func), "=&r" (arg0) - : "0" (func), "1" (arg0), - "i" (HV_FAST_TRAP)); - if (arg0 == HV_EOK) + ret = sun4v_tod_set(secs); + if (ret == HV_EOK) return 0; - if (arg0 == HV_EWOULDBLOCK) { + if (ret == HV_EWOULDBLOCK) { if (--retries > 0) { udelay(100); goto retry; @@ -862,7 +848,6 @@ fs_initcall(clock_init); static unsigned long sparc64_init_timers(void) { struct device_node *dp; - struct property *prop; unsigned long clock; #ifdef CONFIG_SMP extern void smp_tick_init(void); @@ -879,17 +864,15 @@ static unsigned long sparc64_init_timers(void) if (manuf == 0x17 && impl == 0x13) { /* Hummingbird, aka Ultra-IIe */ tick_ops = &hbtick_operations; - prop = of_find_property(dp, "stick-frequency", NULL); + clock = of_getintprop_default(dp, "stick-frequency", 0); } else { tick_ops = &tick_operations; - cpu_find_by_instance(0, &dp, NULL); - prop = of_find_property(dp, "clock-frequency", NULL); + clock = local_cpu_data().clock_tick; } } else { tick_ops = &stick_operations; - prop = of_find_property(dp, "stick-frequency", NULL); + clock = of_getintprop_default(dp, "stick-frequency", 0); } - clock = *(unsigned int *) prop->value; #ifdef CONFIG_SMP smp_tick_init(); @@ -1030,7 +1013,7 @@ void __devinit setup_sparc64_timer(void) clockevents_register_device(sevt); } -#define SPARC64_NSEC_PER_CYC_SHIFT 32UL +#define SPARC64_NSEC_PER_CYC_SHIFT 10UL static struct clocksource clocksource_tick = { .rating = 100, @@ -1365,6 +1348,7 @@ static int hypervisor_set_rtc_time(struct rtc_time *time) return hypervisor_set_time(seconds); } +#ifdef CONFIG_PCI static void bq4802_get_rtc_time(struct rtc_time *time) { unsigned char val = readb(bq4802_regs + 0x0e); @@ -1436,6 +1420,7 @@ static int bq4802_set_rtc_time(struct rtc_time *time) return 0; } +#endif /* CONFIG_PCI */ struct mini_rtc_ops { void (*get_rtc_time)(struct rtc_time *); @@ -1452,10 +1437,12 @@ static struct mini_rtc_ops hypervisor_rtc_ops = { .set_rtc_time = hypervisor_set_rtc_time, }; +#ifdef CONFIG_PCI static struct mini_rtc_ops bq4802_rtc_ops = { .get_rtc_time = bq4802_get_rtc_time, .set_rtc_time = bq4802_set_rtc_time, }; +#endif /* CONFIG_PCI */ static struct mini_rtc_ops *mini_rtc_ops; @@ -1579,8 +1566,10 @@ static int __init rtc_mini_init(void) mini_rtc_ops = &hypervisor_rtc_ops; else if (this_is_starfire) mini_rtc_ops = &starfire_rtc_ops; +#ifdef CONFIG_PCI else if (bq4802_regs) mini_rtc_ops = &bq4802_rtc_ops; +#endif /* CONFIG_PCI */ else return -ENODEV; diff --git a/arch/sparc64/kernel/traps.c b/arch/sparc64/kernel/traps.c index d0fde36395b4a0..00a9e3286c837e 100644 --- a/arch/sparc64/kernel/traps.c +++ b/arch/sparc64/kernel/traps.c @@ -795,8 +795,7 @@ extern unsigned int cheetah_deferred_trap_vector[], cheetah_deferred_trap_vector void __init cheetah_ecache_flush_init(void) { unsigned long largest_size, smallest_linesize, order, ver; - struct device_node *dp; - int i, instance, sz; + int i, sz; /* Scan all cpu device tree nodes, note two values: * 1) largest E-cache size @@ -805,18 +804,20 @@ void __init cheetah_ecache_flush_init(void) largest_size = 0UL; smallest_linesize = ~0UL; - instance = 0; - while (!cpu_find_by_instance(instance, &dp, NULL)) { + for (i = 0; i < NR_CPUS; i++) { unsigned long val; - val = of_getintprop_default(dp, "ecache-size", - (2 * 1024 * 1024)); + val = cpu_data(i).ecache_size; + if (!val) + continue; + if (val > largest_size) largest_size = val; - val = of_getintprop_default(dp, "ecache-line-size", 64); + + val = cpu_data(i).ecache_line_size; if (val < smallest_linesize) smallest_linesize = val; - instance++; + } if (largest_size == 0UL || smallest_linesize == ~0UL) { @@ -2564,7 +2565,15 @@ void __init trap_init(void) (TRAP_PER_CPU_TSB_HUGE_TEMP != offsetof(struct trap_per_cpu, tsb_huge_temp)) || (TRAP_PER_CPU_IRQ_WORKLIST != - offsetof(struct trap_per_cpu, irq_worklist))) + offsetof(struct trap_per_cpu, irq_worklist)) || + (TRAP_PER_CPU_CPU_MONDO_QMASK != + offsetof(struct trap_per_cpu, cpu_mondo_qmask)) || + (TRAP_PER_CPU_DEV_MONDO_QMASK != + offsetof(struct trap_per_cpu, dev_mondo_qmask)) || + (TRAP_PER_CPU_RESUM_QMASK != + offsetof(struct trap_per_cpu, resum_qmask)) || + (TRAP_PER_CPU_NONRESUM_QMASK != + offsetof(struct trap_per_cpu, nonresum_qmask))) trap_per_cpu_offsets_are_bolixed_dave(); if ((TSB_CONFIG_TSB != diff --git a/arch/sparc64/kernel/vmlinux.lds.S b/arch/sparc64/kernel/vmlinux.lds.S index 13fa2a2e4513b7..fb648de18a8d0b 100644 --- a/arch/sparc64/kernel/vmlinux.lds.S +++ b/arch/sparc64/kernel/vmlinux.lds.S @@ -14,7 +14,7 @@ SECTIONS .text 0x0000000000404000 : { _text = .; - *(.text) + TEXT_TEXT SCHED_TEXT LOCK_TEXT KPROBES_TEXT @@ -27,7 +27,7 @@ SECTIONS .data : { - *(.data) + DATA_DATA CONSTRUCTORS } .data1 : { *(.data1) } diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c index 6e5b01d779d2d4..3010227fe24313 100644 --- a/arch/sparc64/mm/init.c +++ b/arch/sparc64/mm/init.c @@ -23,6 +23,7 @@ #include <linux/kprobes.h> #include <linux/cache.h> #include <linux/sort.h> +#include <linux/percpu.h> #include <asm/head.h> #include <asm/system.h> @@ -43,8 +44,8 @@ #include <asm/tsb.h> #include <asm/hypervisor.h> #include <asm/prom.h> - -extern void device_scan(void); +#include <asm/sstate.h> +#include <asm/mdesc.h> #define MAX_PHYS_ADDRESS (1UL << 42UL) #define KPTE_BITMAP_CHUNK_SZ (256UL * 1024UL * 1024UL) @@ -60,8 +61,11 @@ unsigned long kern_linear_pte_xor[2] __read_mostly; unsigned long kpte_linear_bitmap[KPTE_BITMAP_BYTES / sizeof(unsigned long)]; #ifndef CONFIG_DEBUG_PAGEALLOC -/* A special kernel TSB for 4MB and 256MB linear mappings. */ -struct tsb swapper_4m_tsb[KERNEL_TSB4M_NENTRIES]; +/* A special kernel TSB for 4MB and 256MB linear mappings. + * Space is allocated for this right after the trap table + * in arch/sparc64/kernel/head.S + */ +extern struct tsb swapper_4m_tsb[KERNEL_TSB4M_NENTRIES]; #endif #define MAX_BANKS 32 @@ -190,12 +194,9 @@ inline void flush_dcache_page_impl(struct page *page) } #define PG_dcache_dirty PG_arch_1 -#define PG_dcache_cpu_shift 24UL -#define PG_dcache_cpu_mask (256UL - 1UL) - -#if NR_CPUS > 256 -#error D-cache dirty tracking and thread_info->cpu need fixing for > 256 cpus -#endif +#define PG_dcache_cpu_shift 32UL +#define PG_dcache_cpu_mask \ + ((1UL<<ilog2(roundup_pow_of_two(NR_CPUS)))-1UL) #define dcache_dirty_cpu(page) \ (((page)->flags >> PG_dcache_cpu_shift) & PG_dcache_cpu_mask) @@ -557,26 +558,11 @@ static void __init hypervisor_tlb_lock(unsigned long vaddr, unsigned long pte, unsigned long mmu) { - register unsigned long func asm("%o5"); - register unsigned long arg0 asm("%o0"); - register unsigned long arg1 asm("%o1"); - register unsigned long arg2 asm("%o2"); - register unsigned long arg3 asm("%o3"); - - func = HV_FAST_MMU_MAP_PERM_ADDR; - arg0 = vaddr; - arg1 = 0; - arg2 = pte; - arg3 = mmu; - __asm__ __volatile__("ta 0x80" - : "=&r" (func), "=&r" (arg0), - "=&r" (arg1), "=&r" (arg2), - "=&r" (arg3) - : "0" (func), "1" (arg0), "2" (arg1), - "3" (arg2), "4" (arg3)); - if (arg0 != 0) { + unsigned long ret = sun4v_mmu_map_perm_addr(vaddr, 0, pte, mmu); + + if (ret != 0) { prom_printf("hypervisor_tlb_lock[%lx:%lx:%lx:%lx]: " - "errors with %lx\n", vaddr, 0, pte, mmu, arg0); + "errors with %lx\n", vaddr, 0, pte, mmu, ret); prom_halt(); } } @@ -1313,20 +1299,16 @@ static void __init sun4v_ktsb_init(void) void __cpuinit sun4v_ktsb_register(void) { - register unsigned long func asm("%o5"); - register unsigned long arg0 asm("%o0"); - register unsigned long arg1 asm("%o1"); - unsigned long pa; + unsigned long pa, ret; pa = kern_base + ((unsigned long)&ktsb_descr[0] - KERNBASE); - func = HV_FAST_MMU_TSB_CTX0; - arg0 = NUM_KTSB_DESCR; - arg1 = pa; - __asm__ __volatile__("ta %6" - : "=&r" (func), "=&r" (arg0), "=&r" (arg1) - : "0" (func), "1" (arg0), "2" (arg1), - "i" (HV_FAST_TRAP)); + ret = sun4v_mmu_tsb_ctx0(NUM_KTSB_DESCR, pa); + if (ret != 0) { + prom_printf("hypervisor_mmu_tsb_ctx0[%lx]: " + "errors with %lx\n", pa, ret); + prom_halt(); + } } /* paging_init() sets up the page tables */ @@ -1334,6 +1316,9 @@ void __cpuinit sun4v_ktsb_register(void) extern void cheetah_ecache_flush_init(void); extern void sun4v_patch_tlb_handlers(void); +extern void cpu_probe(void); +extern void central_probe(void); + static unsigned long last_valid_pfn; pgd_t swapper_pg_dir[2048]; @@ -1345,9 +1330,24 @@ void __init paging_init(void) unsigned long end_pfn, pages_avail, shift, phys_base; unsigned long real_end, i; + /* These build time checkes make sure that the dcache_dirty_cpu() + * page->flags usage will work. + * + * When a page gets marked as dcache-dirty, we store the + * cpu number starting at bit 32 in the page->flags. Also, + * functions like clear_dcache_dirty_cpu use the cpu mask + * in 13-bit signed-immediate instruction fields. + */ + BUILD_BUG_ON(FLAGS_RESERVED != 32); + BUILD_BUG_ON(SECTIONS_WIDTH + NODES_WIDTH + ZONES_WIDTH + + ilog2(roundup_pow_of_two(NR_CPUS)) > FLAGS_RESERVED); + BUILD_BUG_ON(NR_CPUS > 4096); + kern_base = (prom_boot_mapping_phys_low >> 22UL) << 22UL; kern_size = (unsigned long)&_end - (unsigned long)KERNBASE; + sstate_booting(); + /* Invalidate both kernel TSBs. */ memset(swapper_tsb, 0x40, sizeof(swapper_tsb)); #ifndef CONFIG_DEBUG_PAGEALLOC @@ -1416,8 +1416,13 @@ void __init paging_init(void) kernel_physical_mapping_init(); + real_setup_per_cpu_areas(); + prom_build_devicetree(); + if (tlb_type == hypervisor) + sun4v_mdesc_init(); + { unsigned long zones_size[MAX_NR_ZONES]; unsigned long zholes_size[MAX_NR_ZONES]; @@ -1434,7 +1439,10 @@ void __init paging_init(void) zholes_size); } - device_scan(); + prom_printf("Booting Linux...\n"); + + central_probe(); + cpu_probe(); } static void __init taint_real_pages(void) diff --git a/arch/sparc64/prom/misc.c b/arch/sparc64/prom/misc.c index 0b4213720d4391..f3e0c14e9eef00 100644 --- a/arch/sparc64/prom/misc.c +++ b/arch/sparc64/prom/misc.c @@ -15,6 +15,25 @@ #include <asm/oplib.h> #include <asm/system.h> +int prom_service_exists(const char *service_name) +{ + int err = p1275_cmd("test", P1275_ARG(0, P1275_ARG_IN_STRING) | + P1275_INOUT(1, 1), service_name); + + if (err) + return 0; + return 1; +} + +void prom_sun4v_guest_soft_state(void) +{ + const char *svc = "SUNW,soft-state-supported"; + + if (!prom_service_exists(svc)) + return; + p1275_cmd(svc, P1275_INOUT(0, 0)); +} + /* Reset and reboot the machine with the command 'bcommand'. */ void prom_reboot(const char *bcommand) { diff --git a/arch/um/kernel/dyn.lds.S b/arch/um/kernel/dyn.lds.S index 87a4e4427d8db2..24547741b205b4 100644 --- a/arch/um/kernel/dyn.lds.S +++ b/arch/um/kernel/dyn.lds.S @@ -62,7 +62,7 @@ SECTIONS } =0x90909090 .plt : { *(.plt) } .text : { - *(.text) + TEXT_TEXT SCHED_TEXT LOCK_TEXT *(.fixup) @@ -99,7 +99,8 @@ SECTIONS *(.data.init_task) . = ALIGN(KERNEL_STACK_SIZE); *(.data.init_irqstack) - *(.data .data.* .gnu.linkonce.d.*) + DATA_DATA + *(.data.* .gnu.linkonce.d.*) SORT(CONSTRUCTORS) } .data1 : { *(.data1) } diff --git a/arch/um/kernel/uml.lds.S b/arch/um/kernel/uml.lds.S index bc59f97e34d00a..307b9373676b2f 100644 --- a/arch/um/kernel/uml.lds.S +++ b/arch/um/kernel/uml.lds.S @@ -37,7 +37,7 @@ SECTIONS .text : { - *(.text) + TEXT_TEXT SCHED_TEXT LOCK_TEXT *(.fixup) @@ -61,7 +61,7 @@ SECTIONS *(.data.init_task) . = ALIGN(KERNEL_STACK_SIZE); *(.data.init_irqstack) - *(.data) + DATA_DATA *(.gnu.linkonce.d*) CONSTRUCTORS } diff --git a/arch/um/os-Linux/start_up.c b/arch/um/os-Linux/start_up.c index 79471f85eb8963..3fc13fa8729d27 100644 --- a/arch/um/os-Linux/start_up.c +++ b/arch/um/os-Linux/start_up.c @@ -144,9 +144,7 @@ static int stop_ptraced_child(int pid, void *stack, int exitcode, int exit_with = WEXITSTATUS(status); if (exit_with == 2) non_fatal("check_ptrace : child exited with status 2. " - "Serious trouble happening! Try updating " - "your host skas patch!\nDisabling SYSEMU " - "support."); + "\nDisabling SYSEMU support.\n"); non_fatal("check_ptrace : child exited with exitcode %d, while " "expecting %d; status 0x%x\n", exit_with, exitcode, status); @@ -209,6 +207,7 @@ __uml_setup("nosysemu", nosysemu_cmd_param, static void __init check_sysemu(void) { void *stack; + unsigned long regs[MAX_REG_NR]; int pid, n, status, count=0; non_fatal("Checking syscall emulation patch for ptrace..."); @@ -225,11 +224,20 @@ static void __init check_sysemu(void) fatal("check_sysemu : expected SIGTRAP, got status = %d", status); - n = ptrace(PTRACE_POKEUSR, pid, PT_SYSCALL_RET_OFFSET, - os_getpid()); - if(n < 0) - fatal_perror("check_sysemu : failed to modify system call " - "return"); + if(ptrace(PTRACE_GETREGS, pid, 0, regs) < 0) + fatal_perror("check_sysemu : PTRACE_GETREGS failed"); + if(PT_SYSCALL_NR(regs) != __NR_getpid){ + non_fatal("check_sysemu got system call number %d, " + "expected %d...", PT_SYSCALL_NR(regs), __NR_getpid); + goto fail; + } + + n = ptrace(PTRACE_POKEUSR, pid, PT_SYSCALL_RET_OFFSET, os_getpid()); + if(n < 0){ + non_fatal("check_sysemu : failed to modify system call " + "return"); + goto fail; + } if (stop_ptraced_child(pid, stack, 0, 0) < 0) goto fail_stopped; diff --git a/arch/v850/Kconfig b/arch/v850/Kconfig index 5f54c1236c18da..ace479ab273ff3 100644 --- a/arch/v850/Kconfig +++ b/arch/v850/Kconfig @@ -240,14 +240,6 @@ menu "Processor type and features" config RESET_GUARD bool "Reset Guard" - config LARGE_ALLOCS - bool "Allow allocating large blocks (> 1MB) of memory" - help - Allow the slab memory allocator to keep chains for very large - memory sizes - upto 32MB. You may need this if your system has - a lot of RAM, and you need to able to allocate very large - contiguous chunks. If unsure, say N. - source "mm/Kconfig" endmenu diff --git a/arch/v850/kernel/vmlinux.lds.S b/arch/v850/kernel/vmlinux.lds.S index 3563082212510b..6172599b4ce2aa 100644 --- a/arch/v850/kernel/vmlinux.lds.S +++ b/arch/v850/kernel/vmlinux.lds.S @@ -92,7 +92,7 @@ #define TEXT_CONTENTS \ _text = .; \ __stext = . ; \ - *(.text) \ + TEXT_TEXT \ SCHED_TEXT \ *(.exit.text) /* 2.5 convention */ \ *(.text.exit) /* 2.4 convention */ \ @@ -113,7 +113,7 @@ /* Kernel data segment. */ #define DATA_CONTENTS \ __sdata = . ; \ - *(.data) \ + DATA_DATA \ *(.exit.data) /* 2.5 convention */ \ *(.data.exit) /* 2.4 convention */ \ . = ALIGN (16) ; \ diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig index 145bb824b2a878..5ce94430c019cf 100644 --- a/arch/x86_64/Kconfig +++ b/arch/x86_64/Kconfig @@ -428,12 +428,15 @@ config NR_CPUS memory in the static kernel configuration. config HOTPLUG_CPU - bool "Support for hot-pluggable CPUs (EXPERIMENTAL)" + bool "Support for suspend on SMP and hot-pluggable CPUs (EXPERIMENTAL)" depends on SMP && HOTPLUG && EXPERIMENTAL help Say Y here to experiment with turning CPUs off and on. CPUs can be controlled through /sys/devices/system/cpu/cpu#. - Say N if you want to disable CPU hotplug. + This is also required for suspend/hibernation on SMP systems. + + Say N if you want to disable CPU hotplug and don't need to + suspend. config ARCH_ENABLE_MEMORY_HOTPLUG def_bool y diff --git a/arch/x86_64/defconfig b/arch/x86_64/defconfig index 941a7e3aa5fb93..40178e5c310406 100644 --- a/arch/x86_64/defconfig +++ b/arch/x86_64/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.21-git3 -# Tue May 1 07:30:48 2007 +# Linux kernel version: 2.6.22-rc2 +# Mon May 21 13:23:40 2007 # CONFIG_X86_64=y CONFIG_64BIT=y @@ -53,6 +53,7 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=18 # CONFIG_CPUSETS is not set CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set @@ -72,14 +73,19 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set # # Loadable module support @@ -118,11 +124,11 @@ CONFIG_X86_PC=y # CONFIG_X86_VSMP is not set # CONFIG_MK8 is not set # CONFIG_MPSC is not set -CONFIG_MCORE2=y -# CONFIG_GENERIC_CPU is not set -CONFIG_X86_L1_CACHE_BYTES=64 -CONFIG_X86_L1_CACHE_SHIFT=6 -CONFIG_X86_INTERNODE_CACHE_BYTES=64 +# CONFIG_MCORE2 is not set +CONFIG_GENERIC_CPU=y +CONFIG_X86_L1_CACHE_BYTES=128 +CONFIG_X86_L1_CACHE_SHIFT=7 +CONFIG_X86_INTERNODE_CACHE_BYTES=128 CONFIG_X86_TSC=y CONFIG_X86_GOOD_APIC=y # CONFIG_MICROCODE is not set @@ -174,7 +180,7 @@ CONFIG_X86_MCE_INTEL=y CONFIG_X86_MCE_AMD=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set -# CONFIG_RELOCATABLE is not set +CONFIG_RELOCATABLE=y CONFIG_PHYSICAL_START=0x200000 CONFIG_SECCOMP=y # CONFIG_CC_STACKPROTECTOR is not set @@ -242,7 +248,7 @@ CONFIG_CPU_FREQ_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y -CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set # # CPUFreq processor drivers @@ -266,6 +272,7 @@ CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y CONFIG_PCIEPORTBUS=y CONFIG_PCIEAER=y +CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y # CONFIG_PCI_DEBUG is not set # CONFIG_HT_IRQ is not set @@ -274,10 +281,6 @@ CONFIG_PCI_MSI=y # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# # CONFIG_HOTPLUG_PCI is not set # @@ -395,7 +398,9 @@ CONFIG_IPV6_SIT=y # # CONFIG_CFG80211 is not set # CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set # # Device Drivers @@ -458,14 +463,12 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # Misc devices # # CONFIG_IBM_ASM is not set +# CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_SONY_LAPTOP is not set # CONFIG_THINKPAD_ACPI is not set - -# -# ATA/ATAPI/MFM/RLL support -# +# CONFIG_BLINK is not set CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y @@ -482,6 +485,7 @@ CONFIG_BLK_DEV_IDECD=y # CONFIG_BLK_DEV_IDESCSI is not set CONFIG_BLK_DEV_IDEACPI=y # CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes @@ -491,6 +495,7 @@ CONFIG_IDE_GENERIC=y # CONFIG_BLK_DEV_IDEPNP is not set CONFIG_BLK_DEV_IDEPCI=y # CONFIG_IDEPCI_SHARE_IRQ is not set +CONFIG_IDEPCI_PCIBUS_ORDER=y # CONFIG_BLK_DEV_OFFBOARD is not set # CONFIG_BLK_DEV_GENERIC is not set # CONFIG_BLK_DEV_OPTI621 is not set @@ -556,6 +561,7 @@ CONFIG_CHR_DEV_SG=y CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -579,15 +585,16 @@ CONFIG_SCSI_SAS_ATTRS=y CONFIG_SCSI_AIC79XX=y CONFIG_AIC79XX_CMDS_PER_DEVICE=32 CONFIG_AIC79XX_RESET_DELAY_MS=4000 -# CONFIG_AIC79XX_ENABLE_RD_STRM is not set # CONFIG_AIC79XX_DEBUG_ENABLE is not set CONFIG_AIC79XX_DEBUG_MASK=0 # CONFIG_AIC79XX_REG_PRETTY_PRINT is not set # CONFIG_SCSI_AIC94XX is not set # CONFIG_SCSI_ARCMSR is not set -# CONFIG_MEGARAID_NEWGEN is not set +CONFIG_MEGARAID_NEWGEN=y +CONFIG_MEGARAID_MM=y +CONFIG_MEGARAID_MAILBOX=y # CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set +CONFIG_MEGARAID_SAS=y # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set @@ -609,12 +616,9 @@ CONFIG_AIC79XX_DEBUG_MASK=0 # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_ESP_CORE is not set # CONFIG_SCSI_SRP is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_ACPI=y CONFIG_SATA_AHCI=y CONFIG_SATA_SVW=y CONFIG_ATA_PIIX=y @@ -631,7 +635,6 @@ CONFIG_SATA_SIL=y CONFIG_SATA_VIA=y # CONFIG_SATA_VITESSE is not set # CONFIG_SATA_INIC162X is not set -CONFIG_SATA_ACPI=y # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set @@ -681,6 +684,7 @@ CONFIG_BLK_DEV_DM=y # CONFIG_DM_MIRROR is not set # CONFIG_DM_ZERO is not set # CONFIG_DM_MULTIPATH is not set +# CONFIG_DM_DELAY is not set # # Fusion MPT device support @@ -688,13 +692,14 @@ CONFIG_BLK_DEV_DM=y CONFIG_FUSION=y CONFIG_FUSION_SPI=y # CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set +CONFIG_FUSION_SAS=y CONFIG_FUSION_MAX_SGE=128 # CONFIG_FUSION_CTL is not set # # IEEE 1394 (FireWire) support # +# CONFIG_FIREWIRE is not set CONFIG_IEEE1394=y # @@ -705,10 +710,7 @@ CONFIG_IEEE1394=y # # Controllers # - -# -# Texas Instruments PCILynx requires I2C -# +# CONFIG_IEEE1394_PCILYNX is not set CONFIG_IEEE1394_OHCI1394=y # @@ -725,11 +727,7 @@ CONFIG_IEEE1394_RAWIO=y # I2O device support # # CONFIG_I2O is not set - -# -# Macintosh device drivers -# -# CONFIG_MAC_EMUMOUSEBTN is not set +# CONFIG_MACINTOSH_DRIVERS is not set # # Network device support @@ -745,10 +743,6 @@ CONFIG_TUN=y # ARCnet devices # # CONFIG_ARCNET is not set - -# -# PHY device support -# # CONFIG_PHYLIB is not set # @@ -779,8 +773,7 @@ CONFIG_TULIP=y # CONFIG_HP100 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set -CONFIG_AMD8111_ETH=y -# CONFIG_AMD8111E_NAPI is not set +# CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set CONFIG_B44=y CONFIG_FORCEDETH=y @@ -802,10 +795,7 @@ CONFIG_8139TOO=y # CONFIG_SUNDANCE is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set - -# -# Ethernet (1000 Mbit) -# +CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set CONFIG_E1000=y @@ -824,10 +814,7 @@ CONFIG_TIGON3=y CONFIG_BNX2=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set - -# -# Ethernet (10000 Mbit) -# +CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set # CONFIG_IXGB is not set @@ -835,6 +822,7 @@ CONFIG_S2IO=m # CONFIG_S2IO_NAPI is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set +# CONFIG_MLX4_CORE is not set # # Token Ring devices @@ -848,8 +836,14 @@ CONFIG_S2IO=m # CONFIG_WLAN_80211 is not set # -# Wan interfaces +# USB Network Adapters # +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set +# CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -902,9 +896,17 @@ CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_LIFEBOOK=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_APPLETOUCH is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -954,10 +956,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # IPMI # # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# # CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM_INTEL=y @@ -965,7 +963,6 @@ CONFIG_HW_RANDOM_AMD=y # CONFIG_HW_RANDOM_GEODE is not set # CONFIG_NVRAM is not set CONFIG_RTC=y -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set CONFIG_AGP=y @@ -988,11 +985,58 @@ CONFIG_HPET_MMAP=y # # CONFIG_TCG_TPM is not set # CONFIG_TELCLOCK is not set - -# -# I2C support -# -# CONFIG_I2C is not set +CONFIG_DEVPORT=y +CONFIG_I2C=m +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=m + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set # # SPI support @@ -1004,12 +1048,58 @@ CONFIG_HPET_MMAP=y # Dallas's 1-wire bus # # CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -# CONFIG_HWMON is not set +CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_K8TEMP is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +CONFIG_SENSORS_CORETEMP=y +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +CONFIG_SENSORS_SMSC47B397=m +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_HDAPS is not set +# CONFIG_SENSORS_APPLESMC is not set +# CONFIG_HWMON_DEBUG_CHIP is not set # # Multifunction device drivers @@ -1020,17 +1110,20 @@ CONFIG_HPET_MMAP=y # Multimedia devices # # CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y # CONFIG_USB_DABUSB is not set # # Graphics support # # CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set # CONFIG_FB is not set # @@ -1056,14 +1149,10 @@ CONFIG_SOUND=y # Open Sound System # CONFIG_SOUND_PRIME=y -CONFIG_OBSOLETE_OSS=y -# CONFIG_SOUND_BT878 is not set -# CONFIG_SOUND_ES1371 is not set -CONFIG_SOUND_ICH=y +# CONFIG_OSS_OBSOLETE is not set # CONFIG_SOUND_TRIDENT is not set # CONFIG_SOUND_MSNDCLAS is not set # CONFIG_SOUND_MSNDPIN is not set -# CONFIG_SOUND_VIA82CXXX is not set # CONFIG_SOUND_OSS is not set # @@ -1142,37 +1231,10 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LIBUSUAL is not set # -# USB Input Devices -# -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_TOUCHSCREEN is not set -# CONFIG_USB_YEALINK is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set -# CONFIG_USB_ATI_REMOTE2 is not set -# CONFIG_USB_KEYSPAN_REMOTE is not set -# CONFIG_USB_APPLETOUCH is not set -# CONFIG_USB_GTCO is not set - -# # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET_MII is not set -# CONFIG_USB_USBNET is not set CONFIG_USB_MON=y # @@ -1216,10 +1278,6 @@ CONFIG_USB_MON=y # USB Gadget Support # # CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# # CONFIG_MMC is not set # @@ -1264,10 +1322,6 @@ CONFIG_USB_MON=y # # -# Auxiliary Display support -# - -# # Virtualization # # CONFIG_KVM is not set @@ -1385,6 +1439,7 @@ CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1468,10 +1523,9 @@ CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set -CONFIG_LOG_BUF_SHIFT=18 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set -CONFIG_TIMER_STATS=y +# CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -1487,6 +1541,8 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set # CONFIG_FRAME_POINTER is not set +CONFIG_UNWIND_INFO=y +CONFIG_STACK_UNWIND=y # CONFIG_FORCED_INLINING is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_LKDTM is not set @@ -1513,9 +1569,11 @@ CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/x86_64/ia32/mmap32.c b/arch/x86_64/ia32/mmap32.c index 079f4132575cbc..e4b84b4a417a10 100644 --- a/arch/x86_64/ia32/mmap32.c +++ b/arch/x86_64/ia32/mmap32.c @@ -29,6 +29,7 @@ #include <linux/personality.h> #include <linux/mm.h> #include <linux/random.h> +#include <linux/sched.h> /* * Top of mmap area (just below the process stack). diff --git a/arch/x86_64/kernel/early_printk.c b/arch/x86_64/kernel/early_printk.c index 56eaa259782b9e..296d2b0c5d886c 100644 --- a/arch/x86_64/kernel/early_printk.c +++ b/arch/x86_64/kernel/early_printk.c @@ -91,9 +91,9 @@ static int early_serial_putc(unsigned char ch) static void early_serial_write(struct console *con, const char *s, unsigned n) { while (*s && n-- > 0) { - early_serial_putc(*s); if (*s == '\n') early_serial_putc('\r'); + early_serial_putc(*s); s++; } } diff --git a/arch/x86_64/kernel/k8.c b/arch/x86_64/kernel/k8.c index bc11b32e8b4d41..7377ccb2133502 100644 --- a/arch/x86_64/kernel/k8.c +++ b/arch/x86_64/kernel/k8.c @@ -39,10 +39,10 @@ int cache_k8_northbridges(void) { int i; struct pci_dev *dev; + if (num_k8_northbridges) return 0; - num_k8_northbridges = 0; dev = NULL; while ((dev = next_k8_northbridge(dev)) != NULL) num_k8_northbridges++; @@ -52,6 +52,11 @@ int cache_k8_northbridges(void) if (!k8_northbridges) return -ENOMEM; + if (!num_k8_northbridges) { + k8_northbridges[0] = NULL; + return 0; + } + flush_words = kmalloc(num_k8_northbridges * sizeof(u32), GFP_KERNEL); if (!flush_words) { kfree(k8_northbridges); diff --git a/arch/x86_64/kernel/reboot.c b/arch/x86_64/kernel/reboot.c index c116b54d422e3e..7503068e788d90 100644 --- a/arch/x86_64/kernel/reboot.c +++ b/arch/x86_64/kernel/reboot.c @@ -8,6 +8,7 @@ #include <linux/string.h> #include <linux/pm.h> #include <linux/kdebug.h> +#include <linux/sched.h> #include <asm/io.h> #include <asm/delay.h> #include <asm/hw_irq.h> diff --git a/arch/x86_64/kernel/vmlinux.lds.S b/arch/x86_64/kernel/vmlinux.lds.S index 88cfa50b424d6c..dbccfda8364f91 100644 --- a/arch/x86_64/kernel/vmlinux.lds.S +++ b/arch/x86_64/kernel/vmlinux.lds.S @@ -31,7 +31,7 @@ SECTIONS *(.bootstrap.text) _stext = .; /* Then the rest */ - *(.text) + TEXT_TEXT SCHED_TEXT LOCK_TEXT KPROBES_TEXT @@ -55,7 +55,7 @@ SECTIONS . = ALIGN(PAGE_SIZE); /* Align data segment to page size boundary */ /* Data */ .data : AT(ADDR(.data) - LOAD_OFFSET) { - *(.data) + DATA_DATA CONSTRUCTORS } :data diff --git a/arch/x86_64/kernel/vsyscall.c b/arch/x86_64/kernel/vsyscall.c index 51d4c6fa88c878..57660d58d50032 100644 --- a/arch/x86_64/kernel/vsyscall.c +++ b/arch/x86_64/kernel/vsyscall.c @@ -175,10 +175,13 @@ int __vsyscall(0) vgettimeofday(struct timeval * tv, struct timezone * tz) * unlikely */ time_t __vsyscall(1) vtime(time_t *t) { + struct timeval tv; time_t result; if (unlikely(!__vsyscall_gtod_data.sysctl_enabled)) return time_syscall(t); - result = __vsyscall_gtod_data.wall_time_sec; + + vgettimeofday(&tv, 0); + result = tv.tv_sec; if (t) *t = result; return result; diff --git a/arch/xtensa/kernel/vmlinux.lds.S b/arch/xtensa/kernel/vmlinux.lds.S index 4fbd66a52a8818..4b7b4ff7997349 100644 --- a/arch/xtensa/kernel/vmlinux.lds.S +++ b/arch/xtensa/kernel/vmlinux.lds.S @@ -84,7 +84,8 @@ SECTIONS { /* The .head.text section must be the first section! */ *(.head.text) - *(.literal .text) + *(.literal) + TEXT_TEXT *(.srom.text) VMLINUX_SYMBOL(__sched_text_start) = .; *(.sched.literal .sched.text) @@ -144,7 +145,8 @@ SECTIONS _fdata = .; .data : { - *(.data) CONSTRUCTORS + DATA_DATA + CONSTRUCTORS . = ALIGN(XCHAL_ICACHE_LINESIZE); *(.data.cacheline_aligned) } diff --git a/block/genhd.c b/block/genhd.c index 93a2cf654597c2..863a8c0623ed82 100644 --- a/block/genhd.c +++ b/block/genhd.c @@ -423,7 +423,10 @@ static ssize_t disk_size_read(struct gendisk * disk, char *page) { return sprintf(page, "%llu\n", (unsigned long long)get_capacity(disk)); } - +static ssize_t disk_capability_read(struct gendisk *disk, char *page) +{ + return sprintf(page, "%x\n", disk->flags); +} static ssize_t disk_stats_read(struct gendisk * disk, char *page) { preempt_disable(); @@ -466,6 +469,10 @@ static struct disk_attribute disk_attr_size = { .attr = {.name = "size", .mode = S_IRUGO }, .show = disk_size_read }; +static struct disk_attribute disk_attr_capability = { + .attr = {.name = "capability", .mode = S_IRUGO }, + .show = disk_capability_read +}; static struct disk_attribute disk_attr_stat = { .attr = {.name = "stat", .mode = S_IRUGO }, .show = disk_stats_read @@ -506,6 +513,7 @@ static struct attribute * default_attrs[] = { &disk_attr_removable.attr, &disk_attr_size.attr, &disk_attr_stat.attr, + &disk_attr_capability.attr, #ifdef CONFIG_FAIL_MAKE_REQUEST &disk_attr_fail.attr, #endif @@ -688,6 +696,27 @@ struct seq_operations diskstats_op = { .show = diskstats_show }; +static void media_change_notify_thread(struct work_struct *work) +{ + struct gendisk *gd = container_of(work, struct gendisk, async_notify); + char event[] = "MEDIA_CHANGE=1"; + char *envp[] = { event, NULL }; + + /* + * set enviroment vars to indicate which event this is for + * so that user space will know to go check the media status. + */ + kobject_uevent_env(&gd->kobj, KOBJ_CHANGE, envp); + put_device(gd->driverfs_dev); +} + +void genhd_media_change_notify(struct gendisk *disk) +{ + get_device(disk->driverfs_dev); + schedule_work(&disk->async_notify); +} +EXPORT_SYMBOL_GPL(genhd_media_change_notify); + struct gendisk *alloc_disk(int minors) { return alloc_disk_node(minors, -1); @@ -717,6 +746,8 @@ struct gendisk *alloc_disk_node(int minors, int node_id) kobj_set_kset_s(disk,block_subsys); kobject_init(&disk->kobj); rand_initialize_disk(disk); + INIT_WORK(&disk->async_notify, + media_change_notify_thread); } return disk; } diff --git a/crypto/api.c b/crypto/api.c index 55af8bb0f0502e..33734fd9198f09 100644 --- a/crypto/api.c +++ b/crypto/api.c @@ -48,8 +48,10 @@ EXPORT_SYMBOL_GPL(crypto_mod_get); void crypto_mod_put(struct crypto_alg *alg) { + struct module *module = alg->cra_module; + crypto_alg_put(alg); - module_put(alg->cra_module); + module_put(module); } EXPORT_SYMBOL_GPL(crypto_mod_put); diff --git a/crypto/tcrypt.c b/crypto/tcrypt.c index f0aed0106adb1c..11f9359538166c 100644 --- a/crypto/tcrypt.c +++ b/crypto/tcrypt.c @@ -691,7 +691,7 @@ static int test_hash_cycles(struct hash_desc *desc, char *p, int blen, if (ret) goto out; } - crypto_hash_final(desc, out); + ret = crypto_hash_final(desc, out); if (ret) goto out; } diff --git a/drivers/acpi/numa.c b/drivers/acpi/numa.c index 8fcd6a15517f58..a2efae8a4c4eec 100644 --- a/drivers/acpi/numa.c +++ b/drivers/acpi/numa.c @@ -40,19 +40,19 @@ static nodemask_t nodes_found_map = NODE_MASK_NONE; #define NID_INVAL -1 /* maps to convert between proximity domain and logical node ID */ -int __cpuinitdata pxm_to_node_map[MAX_PXM_DOMAINS] +static int pxm_to_node_map[MAX_PXM_DOMAINS] = { [0 ... MAX_PXM_DOMAINS - 1] = NID_INVAL }; -int __cpuinitdata node_to_pxm_map[MAX_NUMNODES] +static int node_to_pxm_map[MAX_NUMNODES] = { [0 ... MAX_NUMNODES - 1] = PXM_INVAL }; -int __cpuinit pxm_to_node(int pxm) +int pxm_to_node(int pxm) { if (pxm < 0) return NID_INVAL; return pxm_to_node_map[pxm]; } -int __cpuinit node_to_pxm(int node) +int node_to_pxm(int node) { if (node < 0) return PXM_INVAL; diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index ad1f59c1b3fc25..b4a8d6030e4808 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -132,7 +132,7 @@ config SATA_SIS depends on PCI select PATA_SIS help - This option enables support for SiS Serial ATA on + This option enables support for SiS Serial ATA on SiS 964/965/966/180 and Parallel ATA on SiS 180. The PATA support for SiS 180 requires additionally to enable the PATA_SIS driver in the config. diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 1ae443d7ab9222..7baeaffefe7aeb 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -46,7 +46,7 @@ #include <linux/libata.h> #define DRV_NAME "ahci" -#define DRV_VERSION "2.1" +#define DRV_VERSION "2.2" enum { @@ -170,10 +170,12 @@ enum { AHCI_FLAG_IGN_IRQ_IF_ERR = (1 << 25), /* ignore IRQ_IF_ERR */ AHCI_FLAG_HONOR_PI = (1 << 26), /* honor PORTS_IMPL */ AHCI_FLAG_IGN_SERR_INTERNAL = (1 << 27), /* ignore SERR_INTERNAL */ + AHCI_FLAG_32BIT_ONLY = (1 << 28), /* force 32bit */ AHCI_FLAG_COMMON = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA | - ATA_FLAG_SKIP_D2H_BSY, + ATA_FLAG_SKIP_D2H_BSY | + ATA_FLAG_ACPI_SATA, }; struct ahci_cmd_hdr { @@ -353,7 +355,8 @@ static const struct ata_port_info ahci_port_info[] = { /* board_ahci_sb600 */ { .flags = AHCI_FLAG_COMMON | - AHCI_FLAG_IGN_SERR_INTERNAL, + AHCI_FLAG_IGN_SERR_INTERNAL | + AHCI_FLAG_32BIT_ONLY, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = 0x7f, /* udma0-6 ; FIXME */ .port_ops = &ahci_ops, @@ -491,6 +494,13 @@ static void ahci_save_initial_config(struct pci_dev *pdev, hpriv->saved_cap = cap = readl(mmio + HOST_CAP); hpriv->saved_port_map = port_map = readl(mmio + HOST_PORTS_IMPL); + /* some chips lie about 64bit support */ + if ((cap & HOST_CAP_64) && (pi->flags & AHCI_FLAG_32BIT_ONLY)) { + dev_printk(KERN_INFO, &pdev->dev, + "controller can't do 64bit DMA, forcing 32bit\n"); + cap &= ~HOST_CAP_64; + } + /* fixup zero port_map */ if (!port_map) { port_map = (1 << ahci_nr_ports(hpriv->cap)) - 1; diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c index c3d753296bc6a1..7565f022bd69db 100644 --- a/drivers/ata/ata_generic.c +++ b/drivers/ata/ata_generic.c @@ -26,7 +26,7 @@ #include <linux/libata.h> #define DRV_NAME "ata_generic" -#define DRV_VERSION "0.2.11" +#define DRV_VERSION "0.2.12" /* * A generic parallel ATA driver using libata diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 13b6b1df2ac4f5..9c07b88631be6d 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -155,7 +155,6 @@ struct piix_host_priv { static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); static void piix_pata_error_handler(struct ata_port *ap); -static void piix_sata_error_handler(struct ata_port *ap); static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev); static void piix_set_dmamode (struct ata_port *ap, struct ata_device *adev); static void ich_set_dmamode (struct ata_port *ap, struct ata_device *adev); @@ -364,7 +363,7 @@ static const struct ata_port_operations piix_sata_ops = { .freeze = ata_bmdma_freeze, .thaw = ata_bmdma_thaw, - .error_handler = piix_sata_error_handler, + .error_handler = ata_bmdma_error_handler, .post_internal_cmd = ata_bmdma_post_internal_cmd, .irq_handler = ata_interrupt, @@ -579,6 +578,7 @@ static const struct ich_laptop ich_laptop[] = { { 0x27DF, 0x0005, 0x0280 }, /* ICH7 on Acer 5602WLMi */ { 0x27DF, 0x1025, 0x0110 }, /* ICH7 on Acer 3682WLMi */ { 0x27DF, 0x1043, 0x1267 }, /* ICH7 on Asus W5F */ + { 0x24CA, 0x1025, 0x0061 }, /* ICH4 on ACER Aspire 2023WLMi */ /* end marker */ { 0, } }; @@ -641,12 +641,6 @@ static void piix_pata_error_handler(struct ata_port *ap) ata_std_postreset); } -static void piix_sata_error_handler(struct ata_port *ap) -{ - ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset, NULL, - ata_std_postreset); -} - /** * piix_set_piomode - Initialize host controller PATA PIO timings * @ap: Port whose timings we are configuring diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c index ed4138e24b0c3b..02236739b40f73 100644 --- a/drivers/ata/libata-acpi.c +++ b/drivers/ata/libata-acpi.c @@ -321,7 +321,7 @@ static int do_drive_get_GTF(struct ata_device *dev, unsigned int *gtf_length, /* Don't continue if device has no _ADR method. * _GTF is intended for known motherboard devices. */ - if (!(ap->cbl == ATA_CBL_SATA)) { + if (!(ap->flags & ATA_FLAG_ACPI_SATA)) { err = pata_get_dev_handle(gdev, &dev_handle, &pcidevfn); if (err < 0) { if (ata_msg_probe(ap)) @@ -343,7 +343,7 @@ static int do_drive_get_GTF(struct ata_device *dev, unsigned int *gtf_length, /* Get this drive's _ADR info. if not already known. */ if (!dev->obj_handle) { - if (!(ap->cbl == ATA_CBL_SATA)) { + if (!(ap->flags & ATA_FLAG_ACPI_SATA)) { /* get child objects of dev_handle == channel objects, * + _their_ children == drive objects */ /* channel is ap->port_no */ @@ -528,7 +528,7 @@ static int do_drive_set_taskfiles(struct ata_device *dev, ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER: port#: %d\n", __FUNCTION__, ap->port_no); - if (libata_noacpi || !(ap->cbl == ATA_CBL_SATA)) + if (libata_noacpi || !(ap->flags & ATA_FLAG_ACPI_SATA)) return 0; if (!ata_dev_enabled(dev) || (ap->flags & ATA_FLAG_DISABLED)) @@ -578,7 +578,7 @@ int ata_acpi_exec_tfs(struct ata_port *ap) * we should not run GTF on PATA devices since some * PATA require execution of GTM/STM before GTF. */ - if (!(ap->cbl == ATA_CBL_SATA)) + if (!(ap->flags & ATA_FLAG_ACPI_SATA)) return 0; for (ix = 0; ix < ATA_MAX_DEVICES; ix++) { @@ -641,7 +641,7 @@ int ata_acpi_push_id(struct ata_device *dev) __FUNCTION__, dev->devno, ap->port_no); /* Don't continue if not a SATA device. */ - if (!(ap->cbl == ATA_CBL_SATA)) { + if (!(ap->flags & ATA_FLAG_ACPI_SATA)) { if (ata_msg_probe(ap)) ata_dev_printk(dev, KERN_DEBUG, "%s: Not a SATA device\n", __FUNCTION__); diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 4166407eb47cf6..3ca9c610c110c3 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -59,7 +59,7 @@ #include "libata.h" -#define DRV_VERSION "2.20" /* must be exactly four chars */ +#define DRV_VERSION "2.21" /* must be exactly four chars */ /* debounce timing parameters in msecs { interval, duration, timeout } */ @@ -101,12 +101,6 @@ int libata_noacpi = 1; module_param_named(noacpi, libata_noacpi, int, 0444); MODULE_PARM_DESC(noacpi, "Disables the use of ACPI in suspend/resume when set"); -int ata_spindown_compat = 1; -module_param_named(spindown_compat, ata_spindown_compat, int, 0644); -MODULE_PARM_DESC(spindown_compat, "Enable backward compatible spindown " - "behavior. Will be removed. More info can be found in " - "Documentation/feature-removal-schedule.txt\n"); - MODULE_AUTHOR("Jeff Garzik"); MODULE_DESCRIPTION("Library module for ATA devices"); MODULE_LICENSE("GPL"); @@ -983,7 +977,7 @@ static u64 ata_hpa_resize(struct ata_device *dev) { u64 sectors = dev->n_sectors; u64 hpa_sectors; - + if (ata_id_has_lba48(dev->id)) hpa_sectors = ata_read_native_max_address_ext(dev); else @@ -1594,7 +1588,7 @@ unsigned int ata_do_simple_cmd(struct ata_device *dev, u8 cmd) * Check if the current speed of the device requires IORDY. Used * by various controllers for chip configuration. */ - + unsigned int ata_pio_need_iordy(const struct ata_device *adev) { /* Controller doesn't support IORDY. Probably a pointless check @@ -1617,7 +1611,7 @@ unsigned int ata_pio_need_iordy(const struct ata_device *adev) * Compute the highest mode possible if we are not using iordy. Return * -1 if no iordy mode is available. */ - + static u32 ata_pio_mask_no_iordy(const struct ata_device *adev) { /* If we have no drive specific rule, then PIO 2 is non IORDY */ @@ -1919,7 +1913,6 @@ int ata_dev_configure(struct ata_device *dev) snprintf(revbuf, 7, "ATA-%d", ata_id_major_version(id)); dev->n_sectors = ata_id_n_sectors(id); - dev->n_sectors_boot = dev->n_sectors; /* SCSI only uses 4-char revisions, dump full 8 chars from ATA */ ata_id_c_string(dev->id, fwrevbuf, ATA_ID_FW_REV, @@ -2670,7 +2663,7 @@ int ata_timing_compute(struct ata_device *adev, unsigned short speed, t->active += (t->cycle - (t->active + t->recover)) / 2; t->recover = t->cycle - t->active; } - + /* In a few cases quantisation may produce enough errors to leave t->cycle too low for the sum of active and recovery if so we must correct this */ @@ -2900,9 +2893,6 @@ int ata_do_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev) if (used_dma && (ap->host->flags & ATA_HOST_SIMPLEX)) ap->host->simplex_claimed = ap; - /* step5: chip specific finalisation */ - if (ap->ops->post_set_mode) - ap->ops->post_set_mode(ap); out: if (rc) *r_failed_dev = dev; @@ -3032,7 +3022,7 @@ int ata_wait_ready(struct ata_port *ap, unsigned long deadline) if (!(status & ATA_BUSY)) return 0; - if (status == 0xff) + if (!ata_port_online(ap) && status == 0xff) return -ENODEV; if (time_after(now, deadline)) return -EBUSY; @@ -3378,7 +3368,7 @@ int ata_std_prereset(struct ata_port *ap, unsigned long deadline) */ if (!(ap->flags & ATA_FLAG_SKIP_D2H_BSY) && !ata_port_offline(ap)) { rc = ata_wait_ready(ap, deadline); - if (rc) { + if (rc && rc != -ENODEV) { ata_port_printk(ap, KERN_WARNING, "device not ready " "(errno=%d), forcing hardreset\n", rc); ehc->i.action |= ATA_EH_HARDRESET; @@ -3632,7 +3622,6 @@ static int ata_dev_same_device(struct ata_device *dev, unsigned int new_class, const u16 *old_id = dev->id; unsigned char model[2][ATA_ID_PROD_LEN + 1]; unsigned char serial[2][ATA_ID_SERNO_LEN + 1]; - u64 new_n_sectors; if (dev->class != new_class) { ata_dev_printk(dev, KERN_INFO, "class mismatch %d != %d\n", @@ -3644,7 +3633,6 @@ static int ata_dev_same_device(struct ata_device *dev, unsigned int new_class, ata_id_c_string(new_id, model[1], ATA_ID_PROD, sizeof(model[1])); ata_id_c_string(old_id, serial[0], ATA_ID_SERNO, sizeof(serial[0])); ata_id_c_string(new_id, serial[1], ATA_ID_SERNO, sizeof(serial[1])); - new_n_sectors = ata_id_n_sectors(new_id); if (strcmp(model[0], model[1])) { ata_dev_printk(dev, KERN_INFO, "model number mismatch " @@ -3658,25 +3646,12 @@ static int ata_dev_same_device(struct ata_device *dev, unsigned int new_class, return 0; } - if (dev->class == ATA_DEV_ATA && dev->n_sectors != new_n_sectors) { - ata_dev_printk(dev, KERN_INFO, "n_sectors mismatch " - "%llu != %llu\n", - (unsigned long long)dev->n_sectors, - (unsigned long long)new_n_sectors); - /* Are we the boot time size - if so we appear to be the - same disk at this point and our HPA got reapplied */ - if (ata_ignore_hpa && dev->n_sectors_boot == new_n_sectors - && ata_id_hpa_enabled(new_id)) - return 1; - return 0; - } - return 1; } /** - * ata_dev_revalidate - Revalidate ATA device - * @dev: device to revalidate + * ata_dev_reread_id - Re-read IDENTIFY data + * @adev: target ATA device * @readid_flags: read ID flags * * Re-read IDENTIFY page and make sure @dev is still attached to @@ -3688,34 +3663,68 @@ static int ata_dev_same_device(struct ata_device *dev, unsigned int new_class, * RETURNS: * 0 on success, negative errno otherwise */ -int ata_dev_revalidate(struct ata_device *dev, unsigned int readid_flags) +int ata_dev_reread_id(struct ata_device *dev, unsigned int readid_flags) { unsigned int class = dev->class; u16 *id = (void *)dev->ap->sector_buf; int rc; - if (!ata_dev_enabled(dev)) { - rc = -ENODEV; - goto fail; - } - /* read ID data */ rc = ata_dev_read_id(dev, &class, readid_flags, id); if (rc) - goto fail; + return rc; /* is the device still there? */ - if (!ata_dev_same_device(dev, class, id)) { - rc = -ENODEV; - goto fail; - } + if (!ata_dev_same_device(dev, class, id)) + return -ENODEV; memcpy(dev->id, id, sizeof(id[0]) * ATA_ID_WORDS); + return 0; +} + +/** + * ata_dev_revalidate - Revalidate ATA device + * @dev: device to revalidate + * @readid_flags: read ID flags + * + * Re-read IDENTIFY page, make sure @dev is still attached to the + * port and reconfigure it according to the new IDENTIFY page. + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, negative errno otherwise + */ +int ata_dev_revalidate(struct ata_device *dev, unsigned int readid_flags) +{ + u64 n_sectors = dev->n_sectors; + int rc; + + if (!ata_dev_enabled(dev)) + return -ENODEV; + + /* re-read ID */ + rc = ata_dev_reread_id(dev, readid_flags); + if (rc) + goto fail; /* configure device according to the new ID */ rc = ata_dev_configure(dev); - if (rc == 0) - return 0; + if (rc) + goto fail; + + /* verify n_sectors hasn't changed */ + if (dev->class == ATA_DEV_ATA && dev->n_sectors != n_sectors) { + ata_dev_printk(dev, KERN_INFO, "n_sectors mismatch " + "%llu != %llu\n", + (unsigned long long)n_sectors, + (unsigned long long)dev->n_sectors); + rc = -ENODEV; + goto fail; + } + + return 0; fail: ata_dev_printk(dev, KERN_ERR, "revalidation failed (errno=%d)\n", rc); @@ -3759,6 +3768,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "ATAPI CD-ROM DRIVE 40X MAXIMUM",NULL,ATA_HORKAGE_NODMA }, { "_NEC DV5800A", NULL, ATA_HORKAGE_NODMA }, { "SAMSUNG CD-ROM SN-124","N001", ATA_HORKAGE_NODMA }, + { "Seagate STT20000A", NULL, ATA_HORKAGE_NODMA }, /* Weird ATAPI devices */ { "TORiSAN DVD-ROM DRD-N216", NULL, ATA_HORKAGE_MAX_SEC_128 | diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 5309c312f5176e..d8070989a39f58 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -1009,7 +1009,7 @@ static unsigned int atapi_eh_request_sense(struct ata_queued_cmd *qc) sense_buf[0] = 0x70; sense_buf[2] = qc->result_tf.feature >> 4; - /* some devices time out if garbage left in tf */ + /* some devices time out if garbage left in tf */ ata_tf_init(dev, &tf); memset(cdb, 0, ATAPI_CDB_LEN); diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index dd81fa78cdcf62..b3900cfbd880f0 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -893,6 +893,23 @@ int ata_scsi_change_queue_depth(struct scsi_device *sdev, int queue_depth) return queue_depth; } +/* XXX: for spindown warning */ +static void ata_delayed_done_timerfn(unsigned long arg) +{ + struct scsi_cmnd *scmd = (void *)arg; + + scmd->scsi_done(scmd); +} + +/* XXX: for spindown warning */ +static void ata_delayed_done(struct scsi_cmnd *scmd) +{ + static struct timer_list timer; + + setup_timer(&timer, ata_delayed_done_timerfn, (unsigned long)scmd); + mod_timer(&timer, jiffies + 5 * HZ); +} + /** * ata_scsi_start_stop_xlat - Translate SCSI START STOP UNIT command * @qc: Storage for translated ATA taskfile @@ -949,22 +966,24 @@ static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc) * removed. Read Documentation/feature-removal-schedule.txt * for more info. */ - if (ata_spindown_compat && + if ((qc->dev->flags & ATA_DFLAG_SPUNDOWN) && (system_state == SYSTEM_HALT || system_state == SYSTEM_POWER_OFF)) { - static int warned = 0; + static unsigned long warned = 0; - if (!warned) { - spin_unlock_irq(qc->ap->lock); + if (!test_and_set_bit(0, &warned)) { ata_dev_printk(qc->dev, KERN_WARNING, "DISK MIGHT NOT BE SPUN DOWN PROPERLY. " "UPDATE SHUTDOWN UTILITY\n"); ata_dev_printk(qc->dev, KERN_WARNING, "For more info, visit " "http://linux-ata.org/shutdown.html\n"); - warned = 1; - ssleep(5); - spin_lock_irq(qc->ap->lock); + + /* ->scsi_done is not used, use it for + * delayed completion. + */ + scmd->scsi_done = qc->scsidone; + qc->scsidone = ata_delayed_done; } scmd->result = SAM_STAT_GOOD; return 1; @@ -1031,14 +1050,15 @@ static unsigned int ata_scsi_flush_xlat(struct ata_queued_cmd *qc) static void scsi_6_lba_len(const u8 *cdb, u64 *plba, u32 *plen) { u64 lba = 0; - u32 len = 0; + u32 len; VPRINTK("six-byte command\n"); + lba |= ((u64)(cdb[1] & 0x1f)) << 16; lba |= ((u64)cdb[2]) << 8; lba |= ((u64)cdb[3]); - len |= ((u32)cdb[4]); + len = cdb[4]; *plba = lba; *plen = len; @@ -1375,6 +1395,14 @@ static void ata_scsi_qc_complete(struct ata_queued_cmd *qc) } } + /* XXX: track spindown state for spindown skipping and warning */ + if (unlikely(qc->tf.command == ATA_CMD_STANDBY || + qc->tf.command == ATA_CMD_STANDBYNOW1)) + qc->dev->flags |= ATA_DFLAG_SPUNDOWN; + else if (likely(system_state != SYSTEM_HALT && + system_state != SYSTEM_POWER_OFF)) + qc->dev->flags &= ~ATA_DFLAG_SPUNDOWN; + if (need_sense && !ap->ops->error_handler) ata_dump_status(ap->print_id, &qc->result_tf); @@ -1488,14 +1516,14 @@ static int ata_scsi_translate(struct ata_device *dev, struct scsi_cmnd *cmd, early_finish: ata_qc_free(qc); - done(cmd); + qc->scsidone(cmd); DPRINTK("EXIT - early finish (good or error)\n"); return 0; err_did: ata_qc_free(qc); cmd->result = (DID_ERROR << 16); - done(cmd); + qc->scsidone(cmd); err_mem: DPRINTK("EXIT - internal\n"); return 0; diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h index 8b71b73a199cfa..5e246665842055 100644 --- a/drivers/ata/libata.h +++ b/drivers/ata/libata.h @@ -58,7 +58,6 @@ extern int atapi_enabled; extern int atapi_dmadir; extern int libata_fua; extern int libata_noacpi; -extern int ata_spindown_compat; extern struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev); extern int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev, u64 block, u32 n_block, unsigned int tf_flags, @@ -76,7 +75,8 @@ extern unsigned ata_exec_internal_sg(struct ata_device *dev, extern unsigned int ata_do_simple_cmd(struct ata_device *dev, u8 cmd); extern int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class, unsigned int flags, u16 *id); -extern int ata_dev_revalidate(struct ata_device *dev, unsigned int flags); +extern int ata_dev_reread_id(struct ata_device *dev, unsigned int readid_flags); +extern int ata_dev_revalidate(struct ata_device *dev, unsigned int readid_flags); extern int ata_dev_configure(struct ata_device *dev); extern int sata_down_spd_limit(struct ata_port *ap); extern int sata_set_spd_needed(struct ata_port *ap); diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c index 9861059dd67370..03b6ddd2abd246 100644 --- a/drivers/ata/pata_artop.c +++ b/drivers/ata/pata_artop.c @@ -28,7 +28,7 @@ #include <linux/ata.h> #define DRV_NAME "pata_artop" -#define DRV_VERSION "0.4.2" +#define DRV_VERSION "0.4.3" /* * The ARTOP has 33 Mhz and "over clocked" timing tables. Until we @@ -97,9 +97,9 @@ static int artop6260_pre_reset(struct ata_port *ap, unsigned long deadline) * artop6260_cable_detect - identify cable type * @ap: Port * - * Identify the cable type for the ARTOp interface in question + * Identify the cable type for the ARTOP interface in question */ - + static int artop6260_cable_detect(struct ata_port *ap) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); diff --git a/drivers/ata/pata_cmd640.c b/drivers/ata/pata_cmd640.c index ed00fa9d53be61..31cbf8daa29984 100644 --- a/drivers/ata/pata_cmd640.c +++ b/drivers/ata/pata_cmd640.c @@ -107,7 +107,7 @@ static void cmd640_set_piomode(struct ata_port *ap, struct ata_device *adev) pci_write_config_byte(pdev, arttim + 1, (t.active << 4) | t.recover); } else { /* Save the shared timings for channel, they will be loaded - by qc_issue_prot. Reloading the setup time is expensive + by qc_issue_prot. Reloading the setup time is expensive so we keep a merged one loaded */ pci_read_config_byte(pdev, ARTIM23, ®); reg &= 0x3F; @@ -231,7 +231,7 @@ static void cmd640_hardware_init(struct pci_dev *pdev) pci_write_config_byte(pdev, CMDTIM, 0); /* 512 byte bursts (sector) */ pci_write_config_byte(pdev, BRST, 0x40); - /* + /* * A reporter a long time ago * Had problems with the data fifo * So don't run the risk diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c index 2a79b335cfcc43..320a5b10aa98ef 100644 --- a/drivers/ata/pata_cmd64x.c +++ b/drivers/ata/pata_cmd64x.c @@ -31,7 +31,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_cmd64x" -#define DRV_VERSION "0.2.2" +#define DRV_VERSION "0.2.3" /* * CMD64x specific registers definition. diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c index 83bcc5b32597e7..1aabe15ad9d3df 100644 --- a/drivers/ata/pata_cs5520.c +++ b/drivers/ata/pata_cs5520.c @@ -41,7 +41,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_cs5520" -#define DRV_VERSION "0.6.4" +#define DRV_VERSION "0.6.5" struct pio_clocks { diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c index 1b67923d7a4ead..848f0309bf038d 100644 --- a/drivers/ata/pata_cs5530.c +++ b/drivers/ata/pata_cs5530.c @@ -35,7 +35,7 @@ #include <linux/dmi.h> #define DRV_NAME "pata_cs5530" -#define DRV_VERSION "0.7.2" +#define DRV_VERSION "0.7.3" static void __iomem *cs5530_port_base(struct ata_port *ap) { diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c index f37d4cd812a175..aa3256fb9f7ab9 100644 --- a/drivers/ata/pata_cs5535.c +++ b/drivers/ata/pata_cs5535.c @@ -39,7 +39,7 @@ #include <asm/msr.h> #define DRV_NAME "cs5535" -#define DRV_VERSION "0.2.11" +#define DRV_VERSION "0.2.12" /* * The Geode (Aka Athlon GX now) uses an internal MSR based diff --git a/drivers/ata/pata_cypress.c b/drivers/ata/pata_cypress.c index 27b9f29c01e37e..d41a7691dd8ea6 100644 --- a/drivers/ata/pata_cypress.c +++ b/drivers/ata/pata_cypress.c @@ -18,7 +18,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_cypress" -#define DRV_VERSION "0.1.4" +#define DRV_VERSION "0.1.5" /* here are the offset definitions for the registers */ diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c index c6c8a8bb06d08a..0c9cb60907117e 100644 --- a/drivers/ata/pata_hpt366.c +++ b/drivers/ata/pata_hpt366.c @@ -220,32 +220,6 @@ static int hpt36x_cable_detect(struct ata_port *ap) return ATA_CBL_PATA80; } -static int hpt36x_pre_reset(struct ata_port *ap, unsigned long deadline) -{ - static const struct pci_bits hpt36x_enable_bits[] = { - { 0x50, 1, 0x04, 0x04 }, - { 0x54, 1, 0x04, 0x04 } - }; - struct pci_dev *pdev = to_pci_dev(ap->host->dev); - - if (!pci_test_config_bits(pdev, &hpt36x_enable_bits[ap->port_no])) - return -ENOENT; - - return ata_std_prereset(ap, deadline); -} - -/** - * hpt36x_error_handler - reset the hpt36x bus - * @ap: ATA port to reset - * - * Perform the reset handling for the 366/368 - */ - -static void hpt36x_error_handler(struct ata_port *ap) -{ - ata_bmdma_drive_eh(ap, hpt36x_pre_reset, ata_std_softreset, NULL, ata_std_postreset); -} - /** * hpt366_set_piomode - PIO setup * @ap: ATA interface @@ -351,7 +325,7 @@ static struct ata_port_operations hpt366_port_ops = { .freeze = ata_bmdma_freeze, .thaw = ata_bmdma_thaw, - .error_handler = hpt36x_error_handler, + .error_handler = ata_bmdma_error_handler, .post_internal_cmd = ata_bmdma_post_internal_cmd, .cable_detect = hpt36x_cable_detect, diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c index 5a0a410654e2f8..6446735a46e04a 100644 --- a/drivers/ata/pata_hpt37x.c +++ b/drivers/ata/pata_hpt37x.c @@ -26,7 +26,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_hpt37x" -#define DRV_VERSION "0.6.5" +#define DRV_VERSION "0.6.6" struct hpt_clock { u8 xfer_speed; @@ -931,15 +931,6 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) .udma_mask = 0x7f, .port_ops = &hpt372_port_ops }; - /* HPT371, 372 and friends - UDMA100 at 50MHz clock */ - static const struct ata_port_info info_hpt372_50 = { - .sht = &hpt37x_sht, - .flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST, - .pio_mask = 0x1f, - .mwdma_mask = 0x07, - .udma_mask = 0x3f, - .port_ops = &hpt372_port_ops - }; /* HPT374 - UDMA133 */ static const struct ata_port_info info_hpt374 = { .sht = &hpt37x_sht, @@ -961,7 +952,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) u8 mcr1; u32 freq; int prefer_dpll = 1; - + unsigned long iobase = pci_resource_start(dev, 4); const struct hpt_chip *chip_table; @@ -1055,7 +1046,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) */ pci_write_config_byte(dev, 0x5b, 0x23); - + /* * HighPoint does this for HPT372A. * NOTE: This register is only writeable via I/O space. @@ -1088,7 +1079,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) * Turn the frequency check into a band and then find a timing * table to match it. */ - + clock_slot = hpt37x_clock_slot(freq, chip_table->base); if (chip_table->clocks[clock_slot] == NULL || prefer_dpll) { /* @@ -1098,17 +1089,21 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) * use a 50MHz DPLL by choice */ unsigned int f_low, f_high; - int adjust; - - clock_slot = 2; + int dpll, adjust; + + /* Compute DPLL */ + dpll = 2; if (port->udma_mask & 0xE0) - clock_slot = 3; - - f_low = (MHz[clock_slot] * chip_table->base) / 192; + dpll = 3; + + f_low = (MHz[clock_slot] * 48) / MHz[dpll]; f_high = f_low + 2; + if (clock_slot > 1) + f_high += 2; /* Select the DPLL clock. */ pci_write_config_byte(dev, 0x5b, 0x21); + pci_write_config_dword(dev, 0x5C, (f_high << 16) | f_low); for(adjust = 0; adjust < 8; adjust++) { if (hpt37x_calibrate_dpll(dev)) @@ -1124,12 +1119,12 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) printk(KERN_WARNING "hpt37x: DPLL did not stabilize.\n"); return -ENODEV; } - if (clock_slot == 3) + if (dpll == 3) private_data = (void *)hpt37x_timings_66; else private_data = (void *)hpt37x_timings_50; - printk(KERN_INFO "hpt37x: Bus clock %dMHz, using DPLL.\n", MHz[clock_slot]); + printk(KERN_INFO "hpt37x: Bus clock %dMHz, using DPLL.\n", MHz[dpll]); } else { private_data = (void *)chip_table->clocks[clock_slot]; /* diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c index f25154aed75dbd..e947433cb37dd3 100644 --- a/drivers/ata/pata_hpt3x2n.c +++ b/drivers/ata/pata_hpt3x2n.c @@ -521,8 +521,8 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id) /* 371N if rev > 1 */ break; case PCI_DEVICE_ID_TTI_HPT372: - /* 372N if rev >= 1*/ - if (class_rev == 0) + /* 372N if rev >= 2*/ + if (class_rev < 2) return -ENODEV; break; case PCI_DEVICE_ID_TTI_HPT302: diff --git a/drivers/ata/pata_hpt3x3.c b/drivers/ata/pata_hpt3x3.c index bbabe7902fbb2c..8ce5e23a5f75d3 100644 --- a/drivers/ata/pata_hpt3x3.c +++ b/drivers/ata/pata_hpt3x3.c @@ -23,7 +23,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_hpt3x3" -#define DRV_VERSION "0.4.2" +#define DRV_VERSION "0.4.3" /** * hpt3x3_set_piomode - PIO setup diff --git a/drivers/ata/pata_isapnp.c b/drivers/ata/pata_isapnp.c index d042efdfbac4d5..1f647b648204ff 100644 --- a/drivers/ata/pata_isapnp.c +++ b/drivers/ata/pata_isapnp.c @@ -17,7 +17,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_isapnp" -#define DRV_VERSION "0.2.0" +#define DRV_VERSION "0.2.1" static struct scsi_host_template isapnp_sht = { .module = THIS_MODULE, diff --git a/drivers/ata/pata_it8213.c b/drivers/ata/pata_it8213.c index a769952646e123..95b0bb61788b03 100644 --- a/drivers/ata/pata_it8213.c +++ b/drivers/ata/pata_it8213.c @@ -19,7 +19,7 @@ #include <linux/ata.h> #define DRV_NAME "pata_it8213" -#define DRV_VERSION "0.0.2" +#define DRV_VERSION "0.0.3" /** * it8213_pre_reset - check for 40/80 pin diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c index ff9a6fd366577a..b3456d7a592c18 100644 --- a/drivers/ata/pata_it821x.c +++ b/drivers/ata/pata_it821x.c @@ -1,5 +1,5 @@ /* - * ata-it821x.c - IT821x PATA for new ATA layer + * pata_it821x.c - IT821x PATA for new ATA layer * (C) 2005 Red Hat Inc * Alan Cox <alan@redhat.com> * @@ -65,7 +65,6 @@ * * TODO * - ATAPI and other speed filtering - * - Command filter in smart mode * - RAID configuration ioctls */ diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c index b994351fbcd0a6..8d2bc1e9e87188 100644 --- a/drivers/ata/pata_ixp4xx_cf.c +++ b/drivers/ata/pata_ixp4xx_cf.c @@ -23,7 +23,7 @@ #include <scsi/scsi_host.h> #define DRV_NAME "pata_ixp4xx_cf" -#define DRV_VERSION "0.1.2" +#define DRV_VERSION "0.1.3" static int ixp4xx_set_mode(struct ata_port *ap, struct ata_device **error) { diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c index 8d799e87f75254..2af7ff8256ca87 100644 --- a/drivers/ata/pata_jmicron.c +++ b/drivers/ata/pata_jmicron.c @@ -19,7 +19,7 @@ #include <linux/ata.h> #define DRV_NAME "pata_jmicron" -#define DRV_VERSION "0.1.4" +#define DRV_VERSION "0.1.5" typedef enum { PORT_PATA0 = 0, diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c index 707099291e017a..edffc25d2d3fa4 100644 --- a/drivers/ata/pata_legacy.c +++ b/drivers/ata/pata_legacy.c @@ -64,7 +64,7 @@ #include <linux/platform_device.h> #define DRV_NAME "pata_legacy" -#define DRV_VERSION "0.5.4" +#define DRV_VERSION "0.5.5" #define NR_HOST 6 diff --git a/drivers/ata/pata_platform.c b/drivers/ata/pata_platform.c index 1f6384895a4f71..cbb7866940d6e5 100644 --- a/drivers/ata/pata_platform.c +++ b/drivers/ata/pata_platform.c @@ -22,7 +22,7 @@ #include <linux/pata_platform.h> #define DRV_NAME "pata_platform" -#define DRV_VERSION "0.1.2" +#define DRV_VERSION "1.0" static int pio_mask = 1; diff --git a/drivers/ata/pata_qdi.c b/drivers/ata/pata_qdi.c index fb8c9e14b8d48d..1998c19e8743ef 100644 --- a/drivers/ata/pata_qdi.c +++ b/drivers/ata/pata_qdi.c @@ -26,7 +26,7 @@ #include <linux/platform_device.h> #define DRV_NAME "pata_qdi" -#define DRV_VERSION "0.3.0" +#define DRV_VERSION "0.3.1" #define NR_HOST 4 /* Two 6580s */ diff --git a/drivers/ata/pata_rz1000.c b/drivers/ata/pata_rz1000.c index 2bfd7ef42af5eb..a3488b41ad26a6 100644 --- a/drivers/ata/pata_rz1000.c +++ b/drivers/ata/pata_rz1000.c @@ -21,7 +21,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_rz1000" -#define DRV_VERSION "0.2.3" +#define DRV_VERSION "0.2.4" /** diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c index 225013ecf4b6cd..1233063ab9a8dc 100644 --- a/drivers/ata/pata_sc1200.c +++ b/drivers/ata/pata_sc1200.c @@ -40,7 +40,7 @@ #include <linux/libata.h> #define DRV_NAME "sc1200" -#define DRV_VERSION "0.2.4" +#define DRV_VERSION "0.2.5" #define SC1200_REV_A 0x00 #define SC1200_REV_B1 0x01 diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c index cca3aa225efeac..61502bc7bf1d4b 100644 --- a/drivers/ata/pata_scc.c +++ b/drivers/ata/pata_scc.c @@ -43,7 +43,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_scc" -#define DRV_VERSION "0.1" +#define DRV_VERSION "0.2" #define PCI_DEVICE_ID_TOSHIBA_SCC_ATA 0x01b4 @@ -489,23 +489,26 @@ static unsigned int scc_devchk (struct ata_port *ap, * Note: Original code is ata_bus_post_reset(). */ -static void scc_bus_post_reset (struct ata_port *ap, unsigned int devmask) +static int scc_bus_post_reset(struct ata_port *ap, unsigned int devmask, + unsigned long deadline) { struct ata_ioports *ioaddr = &ap->ioaddr; unsigned int dev0 = devmask & (1 << 0); unsigned int dev1 = devmask & (1 << 1); - unsigned long timeout; + int rc; /* if device 0 was found in ata_devchk, wait for its * BSY bit to clear */ - if (dev0) - ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT); + if (dev0) { + rc = ata_wait_ready(ap, deadline); + if (rc && rc != -ENODEV) + return rc; + } /* if device 1 was found in ata_devchk, wait for * register access, then wait for BSY to clear */ - timeout = jiffies + ATA_TMOUT_BOOT; while (dev1) { u8 nsect, lbal; @@ -514,14 +517,15 @@ static void scc_bus_post_reset (struct ata_port *ap, unsigned int devmask) lbal = in_be32(ioaddr->lbal_addr); if ((nsect == 1) && (lbal == 1)) break; - if (time_after(jiffies, timeout)) { - dev1 = 0; - break; - } + if (time_after(jiffies, deadline)) + return -EBUSY; msleep(50); /* give drive a breather */ } - if (dev1) - ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT); + if (dev1) { + rc = ata_wait_ready(ap, deadline); + if (rc && rc != -ENODEV) + return rc; + } /* is all this really necessary? */ ap->ops->dev_select(ap, 0); @@ -529,6 +533,8 @@ static void scc_bus_post_reset (struct ata_port *ap, unsigned int devmask) ap->ops->dev_select(ap, 1); if (dev0) ap->ops->dev_select(ap, 0); + + return 0; } /** @@ -537,8 +543,8 @@ static void scc_bus_post_reset (struct ata_port *ap, unsigned int devmask) * Note: Original code is ata_bus_softreset(). */ -static unsigned int scc_bus_softreset (struct ata_port *ap, - unsigned int devmask) +static unsigned int scc_bus_softreset(struct ata_port *ap, unsigned int devmask, + unsigned long deadline) { struct ata_ioports *ioaddr = &ap->ioaddr; @@ -570,7 +576,7 @@ static unsigned int scc_bus_softreset (struct ata_port *ap, if (scc_check_status(ap) == 0xFF) return 0; - scc_bus_post_reset(ap, devmask); + scc_bus_post_reset(ap, devmask, deadline); return 0; } @@ -579,11 +585,13 @@ static unsigned int scc_bus_softreset (struct ata_port *ap, * scc_std_softreset - reset host port via ATA SRST * @ap: port to reset * @classes: resulting classes of attached devices + * @deadline: deadline jiffies for the operation * * Note: Original code is ata_std_softreset(). */ -static int scc_std_softreset (struct ata_port *ap, unsigned int *classes) +static int scc_std_softreset (struct ata_port *ap, unsigned int *classes, + unsigned long deadline) { unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS; unsigned int devmask = 0, err_mask; @@ -607,7 +615,7 @@ static int scc_std_softreset (struct ata_port *ap, unsigned int *classes) /* issue bus reset */ DPRINTK("about to softreset, devmask=%x\n", devmask); - err_mask = scc_bus_softreset(ap, devmask); + err_mask = scc_bus_softreset(ap, devmask, deadline); if (err_mask) { ata_port_printk(ap, KERN_ERR, "SRST failed (err_mask=0x%x)\n", err_mask); @@ -676,10 +684,11 @@ static void scc_bmdma_stop (struct ata_queued_cmd *qc) if (reg & INTSTS_BMSINT) { unsigned int classes; + unsigned long deadline = jiffies + ATA_TMOUT_BOOT; printk(KERN_WARNING "%s: Internal Bus Error\n", DRV_NAME); out_be32(bmid_base + SCC_DMA_INTST, INTSTS_BMSINT); /* TBD: SW reset */ - scc_std_softreset(ap, &classes); + scc_std_softreset(ap, &classes, deadline); continue; } @@ -862,12 +871,13 @@ static void scc_bmdma_freeze (struct ata_port *ap) /** * scc_pata_prereset - prepare for reset * @ap: ATA port to be reset + * @deadline: deadline jiffies for the operation */ -static int scc_pata_prereset (struct ata_port *ap) +static int scc_pata_prereset(struct ata_port *ap, unsigned long deadline) { ap->cbl = ATA_CBL_PATA80; - return ata_std_prereset(ap); + return ata_std_prereset(ap, deadline); } /** diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c index dee6e211949d8b..1e8f421963c725 100644 --- a/drivers/ata/pata_serverworks.c +++ b/drivers/ata/pata_serverworks.c @@ -41,7 +41,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_serverworks" -#define DRV_VERSION "0.4.0" +#define DRV_VERSION "0.4.1" #define SVWKS_CSB5_REVISION_NEW 0x92 /* min PCI_REVISION_ID for UDMA5 (A2.0) */ #define SVWKS_CSB6_REVISION 0xa0 /* min PCI_REVISION_ID for UDMA4 (A1.0) */ diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c index f2231267e01120..ec3ae9375015a1 100644 --- a/drivers/ata/pata_sis.c +++ b/drivers/ata/pata_sis.c @@ -73,14 +73,14 @@ static int sis_short_ata40(struct pci_dev *dev) } /** - * sis_port_base - return PCI configuration base for dev + * sis_old_port_base - return PCI configuration base for dev * @adev: device * * Returns the base of the PCI configuration registers for this port * number. */ -static int sis_port_base(struct ata_device *adev) +static int sis_old_port_base(struct ata_device *adev) { return 0x40 + (4 * adev->ap->port_no) + (2 * adev->devno); } @@ -211,7 +211,7 @@ static void sis_set_fifo(struct ata_port *ap, struct ata_device *adev) static void sis_old_set_piomode (struct ata_port *ap, struct ata_device *adev) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); - int port = sis_port_base(adev); + int port = sis_old_port_base(adev); u8 t1, t2; int speed = adev->pio_mode - XFER_PIO_0; @@ -248,7 +248,7 @@ static void sis_old_set_piomode (struct ata_port *ap, struct ata_device *adev) static void sis_100_set_piomode (struct ata_port *ap, struct ata_device *adev) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); - int port = sis_port_base(adev); + int port = sis_old_port_base(adev); int speed = adev->pio_mode - XFER_PIO_0; const u8 actrec[] = { 0x00, 0x67, 0x44, 0x33, 0x31 }; @@ -328,7 +328,7 @@ static void sis_old_set_dmamode (struct ata_port *ap, struct ata_device *adev) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); int speed = adev->dma_mode - XFER_MW_DMA_0; - int drive_pci = sis_port_base(adev); + int drive_pci = sis_old_port_base(adev); u16 timing; const u16 mwdma_bits[] = { 0x707, 0x202, 0x202 }; @@ -367,7 +367,7 @@ static void sis_66_set_dmamode (struct ata_port *ap, struct ata_device *adev) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); int speed = adev->dma_mode - XFER_MW_DMA_0; - int drive_pci = sis_port_base(adev); + int drive_pci = sis_old_port_base(adev); u16 timing; const u16 mwdma_bits[] = { 0x707, 0x202, 0x202 }; @@ -378,12 +378,12 @@ static void sis_66_set_dmamode (struct ata_port *ap, struct ata_device *adev) if (adev->dma_mode < XFER_UDMA_0) { /* bits 3-0 hold recovery timing bits 8-10 active timing and the higer bits are dependant on the device, bit 15 udma */ - timing &= ~ 0x870F; + timing &= ~0x870F; timing |= mwdma_bits[speed]; } else { /* Bit 15 is UDMA on/off, bit 12-14 are cycle time */ speed = adev->dma_mode - XFER_UDMA_0; - timing &= ~0x6000; + timing &= ~0xF000; timing |= udma_bits[speed]; } pci_write_config_word(pdev, drive_pci, timing); @@ -405,22 +405,22 @@ static void sis_100_set_dmamode (struct ata_port *ap, struct ata_device *adev) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); int speed = adev->dma_mode - XFER_MW_DMA_0; - int drive_pci = sis_port_base(adev); - u16 timing; + int drive_pci = sis_old_port_base(adev); + u8 timing; - const u16 udma_bits[] = { 0x8B00, 0x8700, 0x8500, 0x8300, 0x8200, 0x8100}; + const u8 udma_bits[] = { 0x8B, 0x87, 0x85, 0x83, 0x82, 0x81}; - pci_read_config_word(pdev, drive_pci, &timing); + pci_read_config_byte(pdev, drive_pci + 1, &timing); if (adev->dma_mode < XFER_UDMA_0) { /* NOT SUPPORTED YET: NEED DATA SHEET. DITTO IN OLD DRIVER */ } else { - /* Bit 15 is UDMA on/off, bit 12-14 are cycle time */ + /* Bit 7 is UDMA on/off, bit 0-3 are cycle time */ speed = adev->dma_mode - XFER_UDMA_0; - timing &= ~0x0F00; + timing &= ~0x8F; timing |= udma_bits[speed]; } - pci_write_config_word(pdev, drive_pci, timing); + pci_write_config_byte(pdev, drive_pci + 1, timing); } /** @@ -440,22 +440,22 @@ static void sis_133_early_set_dmamode (struct ata_port *ap, struct ata_device *a { struct pci_dev *pdev = to_pci_dev(ap->host->dev); int speed = adev->dma_mode - XFER_MW_DMA_0; - int drive_pci = sis_port_base(adev); - u16 timing; - - static const u16 udma_bits[] = { 0x8F00, 0x8A00, 0x8700, 0x8500, 0x8300, 0x8200, 0x8100}; + int drive_pci = sis_old_port_base(adev); + u8 timing; + /* Low 4 bits are timing */ + static const u8 udma_bits[] = { 0x8F, 0x8A, 0x87, 0x85, 0x83, 0x82, 0x81}; - pci_read_config_word(pdev, drive_pci, &timing); + pci_read_config_byte(pdev, drive_pci + 1, &timing); if (adev->dma_mode < XFER_UDMA_0) { /* NOT SUPPORTED YET: NEED DATA SHEET. DITTO IN OLD DRIVER */ } else { - /* Bit 15 is UDMA on/off, bit 12-14 are cycle time */ + /* Bit 7 is UDMA on/off, bit 0-3 are cycle time */ speed = adev->dma_mode - XFER_UDMA_0; - timing &= ~0x0F00; + timing &= ~0x8F; timing |= udma_bits[speed]; } - pci_write_config_word(pdev, drive_pci, timing); + pci_write_config_byte(pdev, drive_pci + 1, timing); } /** diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c index f48491ad5f3aed..e5aaec43694d28 100644 --- a/drivers/ata/pata_sl82c105.c +++ b/drivers/ata/pata_sl82c105.c @@ -26,7 +26,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_sl82c105" -#define DRV_VERSION "0.3.0" +#define DRV_VERSION "0.3.1" enum { /* diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c index e4c71f76bd55ba..a8462f1e890b56 100644 --- a/drivers/ata/pata_via.c +++ b/drivers/ata/pata_via.c @@ -60,6 +60,7 @@ #include <linux/delay.h> #include <scsi/scsi_host.h> #include <linux/libata.h> +#include <linux/dmi.h> #define DRV_NAME "pata_via" #define DRV_VERSION "0.3.1" @@ -122,6 +123,31 @@ static const struct via_isa_bridge { { NULL } }; + +/* + * Cable special cases + */ + +static struct dmi_system_id cable_dmi_table[] = { + { + .ident = "Acer Ferrari 3400", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Acer,Inc."), + DMI_MATCH(DMI_BOARD_NAME, "Ferrari 3400"), + }, + }, + { } +}; + +static int via_cable_override(struct pci_dev *pdev) +{ + /* Systems by DMI */ + if (dmi_check_system(cable_dmi_table)) + return 1; + return 0; +} + + /** * via_cable_detect - cable detection * @ap: ATA port @@ -139,6 +165,9 @@ static int via_cable_detect(struct ata_port *ap) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); u32 ata66; + if (via_cable_override(pdev)) + return ATA_CBL_PATA40_SHORT; + /* Early chips are 40 wire */ if ((config->flags & VIA_UDMA) < VIA_UDMA_66) return ATA_CBL_PATA40; @@ -592,10 +621,11 @@ static int via_reinit_one(struct pci_dev *pdev) #endif static const struct pci_device_id via[] = { - { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C576_1), }, - { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C586_1), }, - { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_6410), }, - { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_SATA_EIDE), }, + { PCI_VDEVICE(VIA, 0x0571), }, + { PCI_VDEVICE(VIA, 0x0581), }, + { PCI_VDEVICE(VIA, 0x1571), }, + { PCI_VDEVICE(VIA, 0x3164), }, + { PCI_VDEVICE(VIA, 0x5324), }, { }, }; diff --git a/drivers/ata/pata_winbond.c b/drivers/ata/pata_winbond.c index cc4ad271afb58b..83abfeca405759 100644 --- a/drivers/ata/pata_winbond.c +++ b/drivers/ata/pata_winbond.c @@ -16,7 +16,7 @@ #include <linux/platform_device.h> #define DRV_NAME "pata_winbond" -#define DRV_VERSION "0.0.2" +#define DRV_VERSION "0.0.3" #define NR_HOST 4 /* Two winbond controllers, two channels each */ diff --git a/drivers/ata/pdc_adma.c b/drivers/ata/pdc_adma.c index 52b69530ab29d7..f12c2b6ac08e97 100644 --- a/drivers/ata/pdc_adma.c +++ b/drivers/ata/pdc_adma.c @@ -44,7 +44,7 @@ #include <linux/libata.h> #define DRV_NAME "pdc_adma" -#define DRV_VERSION "0.05" +#define DRV_VERSION "0.06" /* macro to calculate base address for ATA regs */ #define ADMA_ATA_REGS(base,port_no) ((base) + ((port_no) * 0x40)) diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c index bda5e7747c2100..2d80c9d95e9572 100644 --- a/drivers/ata/sata_inic162x.c +++ b/drivers/ata/sata_inic162x.c @@ -28,7 +28,7 @@ #include <scsi/scsi_device.h> #define DRV_NAME "sata_inic162x" -#define DRV_VERSION "0.1" +#define DRV_VERSION "0.2" enum { MMIO_BAR = 5, diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index cb9b9ac12b4c1c..c957e6e54ba1b6 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -21,6 +21,50 @@ * */ +/* + sata_mv TODO list: + + 1) Needs a full errata audit for all chipsets. I implemented most + of the errata workarounds found in the Marvell vendor driver, but + I distinctly remember a couple workarounds (one related to PCI-X) + are still needed. + + 2) Convert to LibATA new EH. Required for hotplug, NCQ, and sane + probing/error handling in general. MUST HAVE. + + 3) Add hotplug support (easy, once new-EH support appears) + + 4) Add NCQ support (easy to intermediate, once new-EH support appears) + + 5) Investigate problems with PCI Message Signalled Interrupts (MSI). + + 6) Add port multiplier support (intermediate) + + 7) Test and verify 3.0 Gbps support + + 8) Develop a low-power-consumption strategy, and implement it. + + 9) [Experiment, low priority] See if ATAPI can be supported using + "unknown FIS" or "vendor-specific FIS" support, or something creative + like that. + + 10) [Experiment, low priority] Investigate interrupt coalescing. + Quite often, especially with PCI Message Signalled Interrupts (MSI), + the overhead reduced by interrupt mitigation is quite often not + worth the latency cost. + + 11) [Experiment, Marvell value added] Is it possible to use target + mode to cross-connect two Linux boxes with Marvell cards? If so, + creating LibATA target mode support would be very interesting. + + Target mode, for those without docs, is the ability to directly + connect two SATA controllers. + + 13) Verify that 7042 is fully supported. I only have a 6042. + +*/ + + #include <linux/kernel.h> #include <linux/module.h> #include <linux/pci.h> @@ -35,7 +79,7 @@ #include <linux/libata.h> #define DRV_NAME "sata_mv" -#define DRV_VERSION "0.8" +#define DRV_VERSION "0.81" enum { /* BAR's are enumerated in terms of pci_resource_start() terms */ diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c index 4cea3ef752264d..adfa693db53dea 100644 --- a/drivers/ata/sata_nv.c +++ b/drivers/ata/sata_nv.c @@ -49,7 +49,7 @@ #include <linux/libata.h> #define DRV_NAME "sata_nv" -#define DRV_VERSION "3.3" +#define DRV_VERSION "3.4" #define NV_ADMA_DMA_BOUNDARY 0xffffffffUL @@ -229,7 +229,6 @@ struct nv_host_priv { #define NV_ADMA_CHECK_INTR(GCTL, PORT) ((GCTL) & ( 1 << (19 + (12 * (PORT))))) static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); -static void nv_remove_one (struct pci_dev *pdev); #ifdef CONFIG_PM static int nv_pci_device_resume(struct pci_dev *pdev); #endif @@ -288,12 +287,6 @@ static const struct pci_device_id nv_pci_tbl[] = { { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA), GENERIC }, { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA2), GENERIC }, { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA3), GENERIC }, - { PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, - PCI_ANY_ID, PCI_ANY_ID, - PCI_CLASS_STORAGE_IDE<<8, 0xffff00, GENERIC }, - { PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, - PCI_ANY_ID, PCI_ANY_ID, - PCI_CLASS_STORAGE_RAID<<8, 0xffff00, GENERIC }, { } /* terminate list */ }; @@ -306,7 +299,7 @@ static struct pci_driver nv_pci_driver = { .suspend = ata_pci_device_suspend, .resume = nv_pci_device_resume, #endif - .remove = nv_remove_one, + .remove = ata_pci_remove_one, }; static struct scsi_host_template nv_sht = { @@ -809,7 +802,7 @@ static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance) u16 status; u32 gen_ctl; u32 notifier, notifier_error; - + /* if ADMA is disabled, use standard ata interrupt handler */ if (pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) { u8 irq_stat = readb(host->iomap[NV_MMIO_BAR] + NV_INT_STATUS_CK804) @@ -970,7 +963,7 @@ static void nv_adma_irq_clear(struct ata_port *ap) /* clear ADMA status */ writew(0xffff, mmio + NV_ADMA_STAT); - + /* clear notifiers - note both ports need to be written with something even though we are only clearing on one */ if (ap->port_no == 0) { @@ -1613,15 +1606,6 @@ static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) IRQF_SHARED, ppi[0]->sht); } -static void nv_remove_one (struct pci_dev *pdev) -{ - struct ata_host *host = dev_get_drvdata(&pdev->dev); - struct nv_host_priv *hpriv = host->private_data; - - ata_pci_remove_one(pdev); - kfree(hpriv); -} - #ifdef CONFIG_PM static int nv_pci_device_resume(struct pci_dev *pdev) { diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c index 3a7d9b5332af93..2b924a69b365cf 100644 --- a/drivers/ata/sata_promise.c +++ b/drivers/ata/sata_promise.c @@ -297,7 +297,7 @@ static const struct ata_port_info pdc_port_info[] = { /* board_2057x_pata */ { - .flags = PDC_COMMON_FLAGS | ATA_FLAG_SLAVE_POSS, + .flags = PDC_COMMON_FLAGS | ATA_FLAG_SLAVE_POSS | PDC_FLAG_GEN_II, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ diff --git a/drivers/ata/sata_qstor.c b/drivers/ata/sata_qstor.c index f5a05de0093de4..6688ccb6632090 100644 --- a/drivers/ata/sata_qstor.c +++ b/drivers/ata/sata_qstor.c @@ -39,7 +39,7 @@ #include <linux/libata.h> #define DRV_NAME "sata_qstor" -#define DRV_VERSION "0.07" +#define DRV_VERSION "0.08" enum { QS_MMIO_BAR = 4, diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c index e8483aadd11b7b..a3b339bcf3cf2d 100644 --- a/drivers/ata/sata_sil.c +++ b/drivers/ata/sata_sil.c @@ -305,7 +305,7 @@ static int sil_set_mode (struct ata_port *ap, struct ata_device **r_failed) u32 tmp, dev_mode[2]; unsigned int i; int rc; - + rc = ata_do_set_mode(ap, r_failed); if (rc) return rc; diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c index a69d78cd8e9b8e..0ddfae9911cdf1 100644 --- a/drivers/ata/sata_sil24.c +++ b/drivers/ata/sata_sil24.c @@ -30,7 +30,7 @@ #include <linux/libata.h> #define DRV_NAME "sata_sil24" -#define DRV_VERSION "0.8" +#define DRV_VERSION "0.9" /* * Port request block (PRB) 32 bytes @@ -237,7 +237,8 @@ enum { /* host flags */ SIL24_COMMON_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA | - ATA_FLAG_NCQ | ATA_FLAG_SKIP_D2H_BSY, + ATA_FLAG_NCQ | ATA_FLAG_SKIP_D2H_BSY | + ATA_FLAG_ACPI_SATA, SIL24_FLAG_PCIX_IRQ_WOC = (1 << 24), /* IRQ loss errata on PCI-X */ IRQ_STAT_4PORTS = 0xf, diff --git a/drivers/ata/sata_sis.c b/drivers/ata/sata_sis.c index ee66c5fa7ac8d5..221099d1d08fd4 100644 --- a/drivers/ata/sata_sis.c +++ b/drivers/ata/sata_sis.c @@ -43,7 +43,7 @@ #include "sis.h" #define DRV_NAME "sata_sis" -#define DRV_VERSION "0.7" +#define DRV_VERSION "0.8" enum { sis_180 = 0, @@ -255,7 +255,7 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version; struct ata_port_info pi = sis_port_info; - const struct ata_port_info *ppi[] = { &pi, NULL }; + const struct ata_port_info *ppi[] = { &pi, &pi }; struct ata_host *host; u32 genctl, val; u8 pmr; diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c index 17246734fe7695..bcb2cd8b063d76 100644 --- a/drivers/ata/sata_svw.c +++ b/drivers/ata/sata_svw.c @@ -53,7 +53,7 @@ #endif /* CONFIG_PPC_OF */ #define DRV_NAME "sata_svw" -#define DRV_VERSION "2.1" +#define DRV_VERSION "2.2" enum { /* ap->flags bits */ diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c index 3a4f44559d0ae5..2d14f3d56d92d2 100644 --- a/drivers/ata/sata_sx4.c +++ b/drivers/ata/sata_sx4.c @@ -44,7 +44,7 @@ #include "sata_promise.h" #define DRV_NAME "sata_sx4" -#define DRV_VERSION "0.10" +#define DRV_VERSION "0.11" enum { diff --git a/drivers/ata/sata_uli.c b/drivers/ata/sata_uli.c index 006f5e35265831..6815de7cca799b 100644 --- a/drivers/ata/sata_uli.c +++ b/drivers/ata/sata_uli.c @@ -36,7 +36,7 @@ #include <linux/libata.h> #define DRV_NAME "sata_uli" -#define DRV_VERSION "1.1" +#define DRV_VERSION "1.2" enum { uli_5289 = 0, diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c index d105d2c189d265..e8b90e7b42ddcf 100644 --- a/drivers/ata/sata_via.c +++ b/drivers/ata/sata_via.c @@ -46,7 +46,7 @@ #include <linux/libata.h> #define DRV_NAME "sata_via" -#define DRV_VERSION "2.1" +#define DRV_VERSION "2.2" enum board_ids_enum { vt6420, @@ -85,6 +85,9 @@ static const struct pci_device_id svia_pci_tbl[] = { { PCI_VDEVICE(VIA, 0x0591), vt6420 }, { PCI_VDEVICE(VIA, 0x3149), vt6420 }, { PCI_VDEVICE(VIA, 0x3249), vt6421 }, + { PCI_VDEVICE(VIA, 0x5287), vt6420 }, + { PCI_VDEVICE(VIA, 0x5372), vt6420 }, + { PCI_VDEVICE(VIA, 0x7372), vt6420 }, { } /* terminate list */ }; @@ -441,7 +444,7 @@ static int vt6421_prepare_host(struct pci_dev *pdev, struct ata_host **r_host) return -ENOMEM; } - rc = pcim_iomap_regions(pdev, 0x1f, DRV_NAME); + rc = pcim_iomap_regions(pdev, 0x3f, DRV_NAME); if (rc) { dev_printk(KERN_ERR, &pdev->dev, "failed to request/iomap " "PCI BARs (errno=%d)\n", rc); diff --git a/drivers/ata/sata_vsc.c b/drivers/ata/sata_vsc.c index 80126f835d3238..81330175fc8982 100644 --- a/drivers/ata/sata_vsc.c +++ b/drivers/ata/sata_vsc.c @@ -47,7 +47,7 @@ #include <linux/libata.h> #define DRV_NAME "sata_vsc" -#define DRV_VERSION "2.1" +#define DRV_VERSION "2.2" enum { VSC_MMIO_BAR = 0, diff --git a/drivers/atm/idt77252.c b/drivers/atm/idt77252.c index 057efbc55d3829..3800bc0cb2efe8 100644 --- a/drivers/atm/idt77252.c +++ b/drivers/atm/idt77252.c @@ -47,7 +47,8 @@ static char const rcsid[] = #include <linux/bitops.h> #include <linux/wait.h> #include <linux/jiffies.h> -#include <asm/semaphore.h> +#include <linux/mutex.h> + #include <asm/io.h> #include <asm/uaccess.h> #include <asm/atomic.h> @@ -2435,7 +2436,7 @@ idt77252_open(struct atm_vcc *vcc) set_bit(ATM_VF_ADDR, &vcc->flags); - down(&card->mutex); + mutex_lock(&card->mutex); OPRINTK("%s: opening vpi.vci: %d.%d\n", card->name, vpi, vci); @@ -2446,7 +2447,7 @@ idt77252_open(struct atm_vcc *vcc) break; default: printk("%s: Unsupported AAL: %d\n", card->name, vcc->qos.aal); - up(&card->mutex); + mutex_unlock(&card->mutex); return -EPROTONOSUPPORT; } @@ -2455,7 +2456,7 @@ idt77252_open(struct atm_vcc *vcc) card->vcs[index] = kzalloc(sizeof(struct vc_map), GFP_KERNEL); if (!card->vcs[index]) { printk("%s: can't alloc vc in open()\n", card->name); - up(&card->mutex); + mutex_unlock(&card->mutex); return -ENOMEM; } card->vcs[index]->card = card; @@ -2484,14 +2485,14 @@ idt77252_open(struct atm_vcc *vcc) if (inuse) { printk("%s: %s vci already in use.\n", card->name, inuse == 1 ? "tx" : inuse == 2 ? "rx" : "tx and rx"); - up(&card->mutex); + mutex_unlock(&card->mutex); return -EADDRINUSE; } if (vcc->qos.txtp.traffic_class != ATM_NONE) { error = idt77252_init_tx(card, vc, vcc, &vcc->qos); if (error) { - up(&card->mutex); + mutex_unlock(&card->mutex); return error; } } @@ -2499,14 +2500,14 @@ idt77252_open(struct atm_vcc *vcc) if (vcc->qos.rxtp.traffic_class != ATM_NONE) { error = idt77252_init_rx(card, vc, vcc, &vcc->qos); if (error) { - up(&card->mutex); + mutex_unlock(&card->mutex); return error; } } set_bit(ATM_VF_READY, &vcc->flags); - up(&card->mutex); + mutex_unlock(&card->mutex); return 0; } @@ -2520,7 +2521,7 @@ idt77252_close(struct atm_vcc *vcc) unsigned long addr; unsigned long timeout; - down(&card->mutex); + mutex_lock(&card->mutex); IPRINTK("%s: idt77252_close: vc = %d (%d.%d)\n", card->name, vc->index, vcc->vpi, vcc->vci); @@ -2591,7 +2592,7 @@ done: free_scq(card, vc->scq); } - up(&card->mutex); + mutex_unlock(&card->mutex); } static int @@ -2602,7 +2603,7 @@ idt77252_change_qos(struct atm_vcc *vcc, struct atm_qos *qos, int flags) struct vc_map *vc = vcc->dev_data; int error = 0; - down(&card->mutex); + mutex_lock(&card->mutex); if (qos->txtp.traffic_class != ATM_NONE) { if (!test_bit(VCF_TX, &vc->flags)) { @@ -2648,7 +2649,7 @@ idt77252_change_qos(struct atm_vcc *vcc, struct atm_qos *qos, int flags) set_bit(ATM_VF_HASQOS, &vcc->flags); out: - up(&card->mutex); + mutex_unlock(&card->mutex); return error; } @@ -3709,7 +3710,7 @@ idt77252_init_one(struct pci_dev *pcidev, const struct pci_device_id *id) membase = pci_resource_start(pcidev, 1); srambase = pci_resource_start(pcidev, 2); - init_MUTEX(&card->mutex); + mutex_init(&card->mutex); spin_lock_init(&card->cmd_lock); spin_lock_init(&card->tst_lock); diff --git a/drivers/atm/idt77252.h b/drivers/atm/idt77252.h index 544b397382916d..6f2b4a5875fb9b 100644 --- a/drivers/atm/idt77252.h +++ b/drivers/atm/idt77252.h @@ -37,7 +37,7 @@ #include <linux/ptrace.h> #include <linux/skbuff.h> #include <linux/workqueue.h> - +#include <linux/mutex.h> /*****************************************************************************/ /* */ @@ -359,7 +359,7 @@ struct idt77252_dev unsigned long srambase; /* SAR's sram base address */ void __iomem *fbq[4]; /* FBQ fill addresses */ - struct semaphore mutex; + struct mutex mutex; spinlock_t cmd_lock; /* for r/w utility/sram */ unsigned long softstat; diff --git a/drivers/base/dmapool.c b/drivers/base/dmapool.c index 9406259754adaa..91970e9bb05e30 100644 --- a/drivers/base/dmapool.c +++ b/drivers/base/dmapool.c @@ -8,6 +8,7 @@ #include <linux/slab.h> #include <linux/module.h> #include <linux/poison.h> +#include <linux/sched.h> /* * Pool allocator ... wraps the dma_alloc_coherent page allocator, so diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index 370dfe1c422ea8..5acc6c44aeadd1 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -3469,13 +3469,39 @@ static int __devinit cciss_init_one(struct pci_dev *pdev, return -1; } -static void cciss_remove_one(struct pci_dev *pdev) +static void cciss_shutdown(struct pci_dev *pdev) { ctlr_info_t *tmp_ptr; - int i, j; + int i; char flush_buf[4]; int return_code; + tmp_ptr = pci_get_drvdata(pdev); + if (tmp_ptr == NULL) + return; + i = tmp_ptr->ctlr; + if (hba[i] == NULL) + return; + + /* Turn board interrupts off and send the flush cache command */ + /* sendcmd will turn off interrupt, and send the flush... + * To write all data in the battery backed cache to disks */ + memset(flush_buf, 0, 4); + return_code = sendcmd(CCISS_CACHE_FLUSH, i, flush_buf, 4, 0, 0, 0, NULL, + TYPE_CMD); + if (return_code == IO_OK) { + printk(KERN_INFO "Completed flushing cache on controller %d\n", i); + } else { + printk(KERN_WARNING "Error flushing cache on controller %d\n", i); + } + free_irq(hba[i]->intr[2], hba[i]); +} + +static void __devexit cciss_remove_one(struct pci_dev *pdev) +{ + ctlr_info_t *tmp_ptr; + int i, j; + if (pci_get_drvdata(pdev) == NULL) { printk(KERN_ERR "cciss: Unable to remove device \n"); return; @@ -3506,18 +3532,7 @@ static void cciss_remove_one(struct pci_dev *pdev) cciss_unregister_scsi(i); /* unhook from SCSI subsystem */ - /* Turn board interrupts off and send the flush cache command */ - /* sendcmd will turn off interrupt, and send the flush... - * To write all data in the battery backed cache to disks */ - memset(flush_buf, 0, 4); - return_code = sendcmd(CCISS_CACHE_FLUSH, i, flush_buf, 4, 0, 0, 0, NULL, - TYPE_CMD); - if (return_code == IO_OK) { - printk(KERN_INFO "Completed flushing cache on controller %d\n", i); - } else { - printk(KERN_WARNING "Error flushing cache on controller %d\n", i); - } - free_irq(hba[i]->intr[2], hba[i]); + cciss_shutdown(pdev); #ifdef CONFIG_PCI_MSI if (hba[i]->msix_vector) @@ -3550,7 +3565,7 @@ static struct pci_driver cciss_pci_driver = { .probe = cciss_init_one, .remove = __devexit_p(cciss_remove_one), .id_table = cciss_pci_device_id, /* id_table */ - .shutdown = cciss_remove_one, + .shutdown = cciss_shutdown, }; /* diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index 3587cb434371f1..fe088045dd08a9 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -670,7 +670,7 @@ static void __reschedule_timeout(int drive, const char *message, int marg) if (drive == current_reqD) drive = current_drive; del_timer(&fd_timeout); - if (drive < 0 || drive > N_DRIVE) { + if (drive < 0 || drive >= N_DRIVE) { fd_timeout.expires = jiffies + 20UL * HZ; drive = 0; } else diff --git a/drivers/bluetooth/hci_usb.c b/drivers/bluetooth/hci_usb.c index b0238b46ddedb6..7e04dd69f60976 100644 --- a/drivers/bluetooth/hci_usb.c +++ b/drivers/bluetooth/hci_usb.c @@ -115,11 +115,11 @@ static struct usb_device_id blacklist_ids[] = { { USB_DEVICE(0x0a5c, 0x2009), .driver_info = HCI_BCM92035 }, /* Broadcom BCM2045 */ - { USB_DEVICE(0x0a5c, 0x2101), .driver_info = HCI_WRONG_SCO_MTU }, + { USB_DEVICE(0x0a5c, 0x2101), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU }, /* IBM/Lenovo ThinkPad with Broadcom chip */ - { USB_DEVICE(0x0a5c, 0x201e), .driver_info = HCI_WRONG_SCO_MTU }, - { USB_DEVICE(0x0a5c, 0x2110), .driver_info = HCI_WRONG_SCO_MTU }, + { USB_DEVICE(0x0a5c, 0x201e), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU }, + { USB_DEVICE(0x0a5c, 0x2110), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU }, /* Targus ACB10US */ { USB_DEVICE(0x0a5c, 0x2100), .driver_info = HCI_RESET }, @@ -128,17 +128,17 @@ static struct usb_device_id blacklist_ids[] = { { USB_DEVICE(0x0a5c, 0x2111), .driver_info = HCI_RESET }, /* HP laptop with Broadcom chip */ - { USB_DEVICE(0x03f0, 0x171d), .driver_info = HCI_WRONG_SCO_MTU }, + { USB_DEVICE(0x03f0, 0x171d), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU }, /* Dell laptop with Broadcom chip */ - { USB_DEVICE(0x413c, 0x8126), .driver_info = HCI_WRONG_SCO_MTU }, + { USB_DEVICE(0x413c, 0x8126), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU }, /* Microsoft Wireless Transceiver for Bluetooth 2.0 */ { USB_DEVICE(0x045e, 0x009c), .driver_info = HCI_RESET }, /* Kensington Bluetooth USB adapter */ { USB_DEVICE(0x047d, 0x105d), .driver_info = HCI_RESET }, - { USB_DEVICE(0x047d, 0x105e), .driver_info = HCI_WRONG_SCO_MTU }, + { USB_DEVICE(0x047d, 0x105e), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU }, /* ISSC Bluetooth Adapter v3.1 */ { USB_DEVICE(0x1131, 0x1001), .driver_info = HCI_RESET }, @@ -148,8 +148,8 @@ static struct usb_device_id blacklist_ids[] = { { USB_DEVICE(0x0400, 0x080a), .driver_info = HCI_BROKEN_ISOC }, /* Belkin F8T012 and F8T013 devices */ - { USB_DEVICE(0x050d, 0x0012), .driver_info = HCI_WRONG_SCO_MTU }, - { USB_DEVICE(0x050d, 0x0013), .driver_info = HCI_WRONG_SCO_MTU }, + { USB_DEVICE(0x050d, 0x0012), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU }, + { USB_DEVICE(0x050d, 0x0013), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU }, /* Digianswer devices */ { USB_DEVICE(0x08fd, 0x0001), .driver_info = HCI_DIGIANSWER }, diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index abcafac647382a..ef683ebd367caf 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -815,7 +815,7 @@ config SGI_IP27_RTC config GEN_RTC tristate "Generic /dev/rtc emulation" - depends on RTC!=y && !IA64 && !ARM && !M32R && !SPARC && !FRV && !S390 + depends on RTC!=y && !IA64 && !ARM && !M32R && !SPARC && !FRV && !S390 && !SUPERH ---help--- If you say Y here and create a character special file /dev/rtc with major number 10 and minor number 135 using mknod ("man mknod"), you diff --git a/drivers/char/agp/frontend.c b/drivers/char/agp/frontend.c index 679d7f972439b4..c7ed617aa7ff43 100644 --- a/drivers/char/agp/frontend.c +++ b/drivers/char/agp/frontend.c @@ -37,6 +37,7 @@ #include <linux/agpgart.h> #include <linux/slab.h> #include <linux/mm.h> +#include <linux/sched.h> #include <asm/uaccess.h> #include <asm/pgtable.h> #include "agp.h" diff --git a/drivers/char/agp/generic.c b/drivers/char/agp/generic.c index 45aeb917ec6334..d535c406b31925 100644 --- a/drivers/char/agp/generic.c +++ b/drivers/char/agp/generic.c @@ -37,6 +37,7 @@ #include <linux/vmalloc.h> #include <linux/dma-mapping.h> #include <linux/mm.h> +#include <linux/sched.h> #include <asm/io.h> #include <asm/cacheflush.h> #include <asm/pgtable.h> diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c index c72ee97d389254..ca376b92162c29 100644 --- a/drivers/char/cyclades.c +++ b/drivers/char/cyclades.c @@ -1061,6 +1061,7 @@ static void cyy_intr_chip(struct cyclades_card *cinfo, int chip, if (data & info->ignore_status_mask) { info->icount.rx++; + spin_unlock(&cinfo->card_lock); return; } if (tty_buffer_request_room(tty, 1)) { diff --git a/drivers/char/drm/Kconfig b/drivers/char/drm/Kconfig index ef833a1c27eb1c..0b7ffa5191c64e 100644 --- a/drivers/char/drm/Kconfig +++ b/drivers/char/drm/Kconfig @@ -6,7 +6,7 @@ # config DRM tristate "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)" - depends on (AGP || AGP=n) && PCI + depends on (AGP || AGP=n) && PCI && !EMULATED_CMPXCHG help Kernel-level support for the Direct Rendering Infrastructure (DRI) introduced in XFree86 4.0. If you say Y here, you need to select diff --git a/drivers/char/hangcheck-timer.c b/drivers/char/hangcheck-timer.c index f0e7263dfcde0f..0e8ceea5ea780a 100644 --- a/drivers/char/hangcheck-timer.c +++ b/drivers/char/hangcheck-timer.c @@ -48,7 +48,7 @@ #include <linux/delay.h> #include <asm/uaccess.h> #include <linux/sysrq.h> - +#include <linux/timer.h> #define VERSION_STR "0.9.0" diff --git a/drivers/char/random.c b/drivers/char/random.c index 46c1b97748b6ba..0474cac4a84ed8 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -760,7 +760,7 @@ static size_t account(struct entropy_store *r, size_t nbytes, int min, static void extract_buf(struct entropy_store *r, __u8 *out) { - int i, x; + int i; __u32 data[16], buf[5 + SHA_WORKSPACE_WORDS]; sha_init(buf); @@ -772,9 +772,11 @@ static void extract_buf(struct entropy_store *r, __u8 *out) * attempts to find previous ouputs), unless the hash * function can be inverted. */ - for (i = 0, x = 0; i < r->poolinfo->poolwords; i += 16, x+=2) { - sha_transform(buf, (__u8 *)r->pool+i, buf + 5); - add_entropy_words(r, &buf[x % 5], 1); + for (i = 0; i < r->poolinfo->poolwords; i += 16) { + /* hash blocks of 16 words = 512 bits */ + sha_transform(buf, (__u8 *)(r->pool + i), buf + 5); + /* feed back portion of the resulting hash */ + add_entropy_words(r, &buf[i % 5], 1); } /* @@ -782,7 +784,7 @@ static void extract_buf(struct entropy_store *r, __u8 *out) * portion of the pool while mixing, and hash one * final time. */ - __add_entropy_words(r, &buf[x % 5], 1, data); + __add_entropy_words(r, &buf[i % 5], 1, data); sha_transform(buf, (__u8 *)data, buf + 5); /* @@ -1018,37 +1020,44 @@ random_poll(struct file *file, poll_table * wait) return mask; } -static ssize_t -random_write(struct file * file, const char __user * buffer, - size_t count, loff_t *ppos) +static int +write_pool(struct entropy_store *r, const char __user *buffer, size_t count) { - int ret = 0; size_t bytes; __u32 buf[16]; const char __user *p = buffer; - size_t c = count; - while (c > 0) { - bytes = min(c, sizeof(buf)); + while (count > 0) { + bytes = min(count, sizeof(buf)); + if (copy_from_user(&buf, p, bytes)) + return -EFAULT; - bytes -= copy_from_user(&buf, p, bytes); - if (!bytes) { - ret = -EFAULT; - break; - } - c -= bytes; + count -= bytes; p += bytes; - add_entropy_words(&input_pool, buf, (bytes + 3) / 4); - } - if (p == buffer) { - return (ssize_t)ret; - } else { - struct inode *inode = file->f_path.dentry->d_inode; - inode->i_mtime = current_fs_time(inode->i_sb); - mark_inode_dirty(inode); - return (ssize_t)(p - buffer); + add_entropy_words(r, buf, (bytes + 3) / 4); } + + return 0; +} + +static ssize_t +random_write(struct file * file, const char __user * buffer, + size_t count, loff_t *ppos) +{ + size_t ret; + struct inode *inode = file->f_path.dentry->d_inode; + + ret = write_pool(&blocking_pool, buffer, count); + if (ret) + return ret; + ret = write_pool(&nonblocking_pool, buffer, count); + if (ret) + return ret; + + inode->i_mtime = current_fs_time(inode->i_sb); + mark_inode_dirty(inode); + return (ssize_t)count; } static int @@ -1087,8 +1096,8 @@ random_ioctl(struct inode * inode, struct file * file, return -EINVAL; if (get_user(size, p++)) return -EFAULT; - retval = random_write(file, (const char __user *) p, - size, &file->f_pos); + retval = write_pool(&input_pool, (const char __user *)p, + size); if (retval < 0) return retval; credit_entropy_store(&input_pool, ent_count); diff --git a/drivers/char/watchdog/booke_wdt.c b/drivers/char/watchdog/booke_wdt.c index 0e23f29f71abb4..0f5c77ddd39ded 100644 --- a/drivers/char/watchdog/booke_wdt.c +++ b/drivers/char/watchdog/booke_wdt.c @@ -24,7 +24,7 @@ #include <asm/uaccess.h> #include <asm/system.h> -/* If the kernel parameter wdt_enable=1, the watchdog will be enabled at boot. +/* If the kernel parameter wdt=1, the watchdog will be enabled at boot. * Also, the wdt_period sets the watchdog timer period timeout. * For E500 cpus the wdt_period sets which bit changing from 0->1 will * trigger a watchog timeout. This watchdog timeout will occur 3 times, the diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig index e678a33ea67265..bb90cbd7ca51ce 100644 --- a/drivers/crypto/Kconfig +++ b/drivers/crypto/Kconfig @@ -1,10 +1,10 @@ menu "Hardware crypto devices" config CRYPTO_DEV_PADLOCK - bool "Support for VIA PadLock ACE" + tristate "Support for VIA PadLock ACE" depends on X86_32 select CRYPTO_ALGAPI - default y + default m help Some VIA processors come with an integrated crypto engine (so called VIA PadLock ACE, Advanced Cryptography Engine) diff --git a/drivers/crypto/geode-aes.c b/drivers/crypto/geode-aes.c index 6d3840e629de55..6a86958b577f97 100644 --- a/drivers/crypto/geode-aes.c +++ b/drivers/crypto/geode-aes.c @@ -102,10 +102,15 @@ geode_aes_crypt(struct geode_aes_op *op) u32 flags = 0; unsigned long iflags; - if (op->len == 0 || op->src == op->dst) + if (op->len == 0) return 0; - if (op->flags & AES_FLAGS_COHERENT) + /* If the source and destination is the same, then + * we need to turn on the coherent flags, otherwise + * we don't need to worry + */ + + if (op->src == op->dst) flags |= (AES_CTRL_DCA | AES_CTRL_SCA); if (op->dir == AES_DIR_ENCRYPT) @@ -120,7 +125,7 @@ geode_aes_crypt(struct geode_aes_op *op) _writefield(AES_WRITEIV0_REG, op->iv); } - if (op->flags & AES_FLAGS_USRKEY) { + if (!(op->flags & AES_FLAGS_HIDDENKEY)) { flags |= AES_CTRL_WRKEY; _writefield(AES_WRITEKEY0_REG, op->key); } @@ -289,6 +294,7 @@ static struct crypto_alg geode_cbc_alg = { .setkey = geode_setkey, .encrypt = geode_cbc_encrypt, .decrypt = geode_cbc_decrypt, + .ivsize = AES_IV_LENGTH, } } }; diff --git a/drivers/crypto/geode-aes.h b/drivers/crypto/geode-aes.h index 8003a36f3a83de..f47968671ae7cf 100644 --- a/drivers/crypto/geode-aes.h +++ b/drivers/crypto/geode-aes.h @@ -20,8 +20,7 @@ #define AES_DIR_DECRYPT 0 #define AES_DIR_ENCRYPT 1 -#define AES_FLAGS_USRKEY (1 << 0) -#define AES_FLAGS_COHERENT (1 << 1) +#define AES_FLAGS_HIDDENKEY (1 << 0) struct geode_aes_op { diff --git a/drivers/firewire/Kconfig b/drivers/firewire/Kconfig index 5932c72f9e424a..396dade731f917 100644 --- a/drivers/firewire/Kconfig +++ b/drivers/firewire/Kconfig @@ -18,7 +18,7 @@ config FIREWIRE your IEEE 1394 adapter. To compile this driver as a module, say M here: the module will be - called fw-core. + called firewire-core. This is the "JUJU" FireWire stack, an alternative implementation designed for robustness and simplicity. You can build either this @@ -34,11 +34,11 @@ config FIREWIRE_OHCI is the only chipset in use, so say Y here. To compile this driver as a module, say M here: The module will be - called fw-ohci. + called firewire-ohci. If you also build ohci1394 of the classic IEEE 1394 driver stack, - blacklist either ohci1394 or fw-ohci to let hotplug load the desired - driver. + blacklist either ohci1394 or firewire-ohci to let hotplug load the + desired driver. config FIREWIRE_SBP2 tristate "Support for storage devices (SBP-2 protocol driver)" @@ -50,12 +50,12 @@ config FIREWIRE_SBP2 like scanners. To compile this driver as a module, say M here: The module will be - called fw-sbp2. + called firewire-sbp2. You should also enable support for disks, CD-ROMs, etc. in the SCSI configuration section. If you also build sbp2 of the classic IEEE 1394 driver stack, - blacklist either sbp2 or fw-sbp2 to let hotplug load the desired - driver. + blacklist either sbp2 or firewire-sbp2 to let hotplug load the + desired driver. diff --git a/drivers/firewire/Makefile b/drivers/firewire/Makefile index fc7d59d4bce049..a7c31e9039c14c 100644 --- a/drivers/firewire/Makefile +++ b/drivers/firewire/Makefile @@ -2,9 +2,11 @@ # Makefile for the Linux IEEE 1394 implementation # -fw-core-y += fw-card.o fw-topology.o fw-transaction.o fw-iso.o \ - fw-device.o fw-cdev.o +firewire-core-y += fw-card.o fw-topology.o fw-transaction.o fw-iso.o \ + fw-device.o fw-cdev.o +firewire-ohci-y += fw-ohci.o +firewire-sbp2-y += fw-sbp2.o -obj-$(CONFIG_FIREWIRE) += fw-core.o -obj-$(CONFIG_FIREWIRE_OHCI) += fw-ohci.o -obj-$(CONFIG_FIREWIRE_SBP2) += fw-sbp2.o +obj-$(CONFIG_FIREWIRE) += firewire-core.o +obj-$(CONFIG_FIREWIRE_OHCI) += firewire-ohci.o +obj-$(CONFIG_FIREWIRE_SBP2) += firewire-sbp2.o diff --git a/drivers/firewire/fw-cdev.c b/drivers/firewire/fw-cdev.c index 0fa5bd54c6a18a..3ab3585d360126 100644 --- a/drivers/firewire/fw-cdev.c +++ b/drivers/firewire/fw-cdev.c @@ -365,7 +365,7 @@ complete_transaction(struct fw_card *card, int rcode, response->response.data, response->response.length); } -static ssize_t ioctl_send_request(struct client *client, void *buffer) +static int ioctl_send_request(struct client *client, void *buffer) { struct fw_device *device = client->device; struct fw_cdev_send_request *request = buffer; diff --git a/drivers/firewire/fw-ohci.c b/drivers/firewire/fw-ohci.c index c17342d3e6fd01..2e4cfa57126d61 100644 --- a/drivers/firewire/fw-ohci.c +++ b/drivers/firewire/fw-ohci.c @@ -268,7 +268,7 @@ static int ar_context_add_page(struct ar_context *ctx) dma_sync_single_for_device(dev, ab_bus, PAGE_SIZE, DMA_BIDIRECTIONAL); - ctx->last_buffer->descriptor.branch_address = ab_bus | 1; + ctx->last_buffer->descriptor.branch_address = cpu_to_le32(ab_bus | 1); ctx->last_buffer->next = ab; ctx->last_buffer = ab; @@ -417,7 +417,8 @@ ar_context_init(struct ar_context *ctx, struct fw_ohci *ohci, u32 regs) ctx->current_buffer = ab.next; ctx->pointer = ctx->current_buffer->data; - reg_write(ctx->ohci, COMMAND_PTR(ctx->regs), ab.descriptor.branch_address); + reg_write(ctx->ohci, COMMAND_PTR(ctx->regs), + le32_to_cpu(ab.descriptor.branch_address)); reg_write(ctx->ohci, CONTROL_SET(ctx->regs), CONTEXT_RUN); flush_writes(ctx->ohci); diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 4d1cb5b855d17e..13eea47dceb356 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -620,7 +620,7 @@ config SENSORS_HDAPS config SENSORS_APPLESMC tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)" - depends on HWMON && INPUT && X86 + depends on INPUT && X86 select NEW_LEDS select LEDS_CLASS default n diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c index 0c160675b3acc5..fd1281f4220909 100644 --- a/drivers/hwmon/applesmc.c +++ b/drivers/hwmon/applesmc.c @@ -491,6 +491,12 @@ out: /* Sysfs Files */ +static ssize_t applesmc_name_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return snprintf(buf, PAGE_SIZE, "applesmc\n"); +} + static ssize_t applesmc_position_show(struct device *dev, struct device_attribute *attr, char *buf) { @@ -913,6 +919,8 @@ static struct led_classdev applesmc_backlight = { .brightness_set = applesmc_brightness_set, }; +static DEVICE_ATTR(name, 0444, applesmc_name_show, NULL); + static DEVICE_ATTR(position, 0444, applesmc_position_show, NULL); static DEVICE_ATTR(calibrate, 0644, applesmc_calibrate_show, applesmc_calibrate_store); @@ -1197,10 +1205,14 @@ static int __init applesmc_init(void) goto out_driver; } + ret = sysfs_create_file(&pdev->dev.kobj, &dev_attr_name.attr); + if (ret) + goto out_device; + /* Create key enumeration sysfs files */ ret = sysfs_create_group(&pdev->dev.kobj, &key_enumeration_group); if (ret) - goto out_device; + goto out_name; /* create fan files */ count = applesmc_get_fan_count(); @@ -1300,6 +1312,8 @@ out_fan_1: sysfs_remove_group(&pdev->dev.kobj, &fan_attribute_groups[1]); out_key_enumeration: sysfs_remove_group(&pdev->dev.kobj, &key_enumeration_group); +out_name: + sysfs_remove_file(&pdev->dev.kobj, &dev_attr_name.attr); out_device: platform_device_unregister(pdev); out_driver: @@ -1325,6 +1339,7 @@ static void __exit applesmc_exit(void) sysfs_remove_group(&pdev->dev.kobj, &fan_attribute_groups[0]); sysfs_remove_group(&pdev->dev.kobj, &fan_attribute_groups[1]); sysfs_remove_group(&pdev->dev.kobj, &key_enumeration_group); + sysfs_remove_file(&pdev->dev.kobj, &dev_attr_name.attr); platform_device_unregister(pdev); platform_driver_unregister(&applesmc_driver); release_region(APPLESMC_DATA_PORT, APPLESMC_NR_PORTS); diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c index 75e3911810a38a..0328382df8fae7 100644 --- a/drivers/hwmon/coretemp.c +++ b/drivers/hwmon/coretemp.c @@ -176,6 +176,22 @@ static int __devinit coretemp_probe(struct platform_device *pdev) goto exit_free; } + /* Check if we have problem with errata AE18 of Core processors: + Readings might stop update when processor visited too deep sleep, + fixed for stepping D0 (6EC). + */ + + if ((c->x86_model == 0xe) && (c->x86_mask < 0xc)) { + /* check for microcode update */ + rdmsr_on_cpu(data->id, MSR_IA32_UCODE_REV, &eax, &edx); + if (edx < 0x39) { + dev_err(&pdev->dev, + "Errata AE18 not fixed, update BIOS or " + "microcode of the CPU!\n"); + goto exit_free; + } + } + /* Some processors have Tjmax 85 following magic should detect it Intel won't disclose the information without signed NDA, but individuals cannot sign it. Catch(ed) 22. @@ -193,6 +209,19 @@ static int __devinit coretemp_probe(struct platform_device *pdev) } } + /* Intel says that above should not work for desktop Core2 processors, + but it seems to work. There is no other way how get the absolute + readings. Warn the user about this. First check if are desktop, + bit 50 of MSR_IA32_PLATFORM_ID should be 0. + */ + + rdmsr_safe_on_cpu(data->id, MSR_IA32_PLATFORM_ID, &eax, &edx); + + if ((c->x86_model == 0xf) && (!(edx & 0x00040000))) { + dev_warn(&pdev->dev, "Using undocumented features, absolute " + "temperature might be wrong!\n"); + } + platform_set_drvdata(pdev, data); if ((err = sysfs_create_group(&pdev->dev.kobj, &coretemp_group))) @@ -330,9 +359,6 @@ static int __init coretemp_init(void) int i, err = -ENODEV; struct pdev_entry *p, *n; - printk(KERN_NOTICE DRVNAME ": This driver uses undocumented features " - "of Core CPU. Temperature might be wrong!\n"); - /* quick check if we run Intel */ if (cpu_data[0].x86_vendor != X86_VENDOR_INTEL) goto exit; diff --git a/drivers/hwmon/ds1621.c b/drivers/hwmon/ds1621.c index c849c0c6ee9ce3..d5ac422d73b2f9 100644 --- a/drivers/hwmon/ds1621.c +++ b/drivers/hwmon/ds1621.c @@ -53,8 +53,8 @@ MODULE_PARM_DESC(polarity, "Output's polarity: 0 = active high, 1 = active low") /* The DS1621 registers */ #define DS1621_REG_TEMP 0xAA /* word, RO */ -#define DS1621_REG_TEMP_MIN 0xA1 /* word, RW */ -#define DS1621_REG_TEMP_MAX 0xA2 /* word, RW */ +#define DS1621_REG_TEMP_MIN 0xA2 /* word, RW */ +#define DS1621_REG_TEMP_MAX 0xA1 /* word, RW */ #define DS1621_REG_CONF 0xAC /* byte, RW */ #define DS1621_COM_START 0xEE /* no data */ #define DS1621_COM_STOP 0x22 /* no data */ @@ -328,9 +328,9 @@ static struct ds1621_data *ds1621_update_client(struct device *dev) /* reset alarms if necessary */ new_conf = data->conf; - if (data->temp < data->temp_min) + if (data->temp > data->temp_min) new_conf &= ~DS1621_ALARM_TEMP_LOW; - if (data->temp > data->temp_max) + if (data->temp < data->temp_max) new_conf &= ~DS1621_ALARM_TEMP_HIGH; if (data->conf != new_conf) ds1621_write_value(client, DS1621_REG_CONF, diff --git a/drivers/hwmon/hwmon-vid.c b/drivers/hwmon/hwmon-vid.c index 5aab23b93e246f..f17e771e42f8aa 100644 --- a/drivers/hwmon/hwmon-vid.c +++ b/drivers/hwmon/hwmon-vid.c @@ -132,7 +132,9 @@ int vid_from_reg(int val, u8 vrm) val &= 0x7f; return(val > 0x77 ? 0 : (1500000 - (val * 12500) + 500) / 1000); default: /* report 0 for unknown */ - printk(KERN_INFO "hwmon-vid: requested unknown VRM version\n"); + if (vrm) + printk(KERN_WARNING "hwmon-vid: Requested unsupported " + "VRM version (%u)\n", (unsigned int)vrm); return 0; } } diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c index a5b774b07cbde4..12cb40a975de90 100644 --- a/drivers/hwmon/w83627hf.c +++ b/drivers/hwmon/w83627hf.c @@ -965,8 +965,10 @@ static int __init w83627hf_find(int sioaddr, unsigned short *addr, case W687THF_DEVID: sio_data->type = w83687thf; break; + case 0xff: /* No device at all */ + goto exit; default: - pr_debug(DRVNAME ": Unsupported chip (DEVID=0x%x)\n", val); + pr_debug(DRVNAME ": Unsupported chip (DEVID=0x%02x)\n", val); goto exit; } diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c index 8a0a99b93641d4..28e7b91a4553ff 100644 --- a/drivers/i2c/busses/i2c-pxa.c +++ b/drivers/i2c/busses/i2c-pxa.c @@ -837,20 +837,10 @@ static const struct i2c_algorithm i2c_pxa_algorithm = { .functionality = i2c_pxa_functionality, }; -static struct pxa_i2c i2c_pxa = { - .lock = __SPIN_LOCK_UNLOCKED(i2c_pxa.lock), - .adap = { - .owner = THIS_MODULE, - .algo = &i2c_pxa_algorithm, - .name = "pxa2xx-i2c.0", - .retries = 5, - }, -}; - #define res_len(r) ((r)->end - (r)->start + 1) static int i2c_pxa_probe(struct platform_device *dev) { - struct pxa_i2c *i2c = &i2c_pxa; + struct pxa_i2c *i2c; struct resource *res; struct i2c_pxa_platform_data *plat = dev->dev.platform_data; int ret; @@ -864,15 +854,20 @@ static int i2c_pxa_probe(struct platform_device *dev) if (!request_mem_region(res->start, res_len(res), res->name)) return -ENOMEM; - i2c = kmalloc(sizeof(struct pxa_i2c), GFP_KERNEL); + i2c = kzalloc(sizeof(struct pxa_i2c), GFP_KERNEL); if (!i2c) { ret = -ENOMEM; goto emalloc; } - memcpy(i2c, &i2c_pxa, sizeof(struct pxa_i2c)); + i2c->adap.owner = THIS_MODULE; + i2c->adap.algo = &i2c_pxa_algorithm; + i2c->adap.retries = 5; + + spin_lock_init(&i2c->lock); init_waitqueue_head(&i2c->wait); - i2c->adap.name[strlen(i2c->adap.name) - 1] = '0' + dev->id % 10; + + sprintf(i2c->adap.name, "pxa_i2c-i2c.%u", dev->id); i2c->reg_base = ioremap(res->start, res_len(res)); if (!i2c->reg_base) { diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index e68a96f589fd39..e4540fcf6476e1 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -830,7 +830,8 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev) i2c->irq = res; - dev_dbg(&pdev->dev, "irq resource %p (%ld)\n", res, res->start); + dev_dbg(&pdev->dev, "irq resource %p (%lu)\n", res, + (unsigned long)res->start); ret = i2c_add_adapter(&i2c->adap); if (ret < 0) { diff --git a/drivers/i2c/busses/i2c-tiny-usb.c b/drivers/i2c/busses/i2c-tiny-usb.c index 907999049d500a..cb9abe7565a710 100644 --- a/drivers/i2c/busses/i2c-tiny-usb.c +++ b/drivers/i2c/busses/i2c-tiny-usb.c @@ -208,7 +208,7 @@ static int i2c_tiny_usb_probe(struct usb_interface *interface, dev->adapter.class = I2C_CLASS_HWMON; dev->adapter.algo = &usb_algorithm; dev->adapter.algo_data = dev; - snprintf(dev->adapter.name, I2C_NAME_SIZE, + snprintf(dev->adapter.name, sizeof(dev->adapter.name), "i2c-tiny-usb at bus %03d device %03d", dev->usb_dev->bus->busnum, dev->usb_dev->devnum); diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 64f8e56d300ec7..435925eba437df 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -697,9 +697,10 @@ int i2c_attach_client(struct i2c_client *client) if (client->driver) client->dev.driver = &client->driver->driver; - if (client->driver && !is_newstyle_driver(client->driver)) + if (client->driver && !is_newstyle_driver(client->driver)) { client->dev.release = i2c_client_release; - else + client->dev.uevent_suppress = 1; + } else client->dev.release = i2c_client_dev_release; snprintf(&client->dev.bus_id[0], sizeof(client->dev.bus_id), diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c index b77b7d138c497c..ead141e2db9e2d 100644 --- a/drivers/ide/ide-dma.c +++ b/drivers/ide/ide-dma.c @@ -119,15 +119,17 @@ static const struct drive_list_entry drive_blacklist [] = { { "HITACHI CDR-8335" , "ALL" }, { "HITACHI CDR-8435" , "ALL" }, { "Toshiba CD-ROM XM-6202B" , "ALL" }, + { "TOSHIBA CD-ROM XM-1702BC", "ALL" }, { "CD-532E-A" , "ALL" }, { "E-IDE CD-ROM CR-840", "ALL" }, { "CD-ROM Drive/F5A", "ALL" }, { "WPI CDD-820", "ALL" }, { "SAMSUNG CD-ROM SC-148C", "ALL" }, { "SAMSUNG CD-ROM SC", "ALL" }, - { "SanDisk SDP3B-64" , "ALL" }, { "ATAPI CD-ROM DRIVE 40X MAXIMUM", "ALL" }, { "_NEC DV5800A", "ALL" }, + { "SAMSUNG CD-ROM SN-124", "N001" }, + { "Seagate STT20000A", "ALL" }, { NULL , NULL } }; diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c index d50bd996ff2293..ea94c9aa122075 100644 --- a/drivers/ide/ide-proc.c +++ b/drivers/ide/ide-proc.c @@ -67,6 +67,8 @@ static int proc_ide_read_imodel case ide_4drives: name = "4drives"; break; case ide_pmac: name = "mac-io"; break; case ide_au1xxx: name = "au1xxx"; break; + case ide_etrax100: name = "etrax100"; break; + case ide_acorn: name = "acorn"; break; default: name = "(unknown)"; break; } len = sprintf(page, "%s\n", name); diff --git a/drivers/ide/pci/atiixp.c b/drivers/ide/pci/atiixp.c index 0e52ad722a72ab..8ab33faf6f7677 100644 --- a/drivers/ide/pci/atiixp.c +++ b/drivers/ide/pci/atiixp.c @@ -317,6 +317,7 @@ static struct pci_device_id atiixp_pci_tbl[] = { { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP300_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1}, + { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1}, { 0, }, }; MODULE_DEVICE_TABLE(pci, atiixp_pci_tbl); diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/pci/serverworks.c index 6234f806c6b5ca..47bcd91c9b5f50 100644 --- a/drivers/ide/pci/serverworks.c +++ b/drivers/ide/pci/serverworks.c @@ -158,6 +158,12 @@ static int svwks_tune_chipset (ide_drive_t *drive, u8 xferspeed) pci_read_config_word(dev, 0x4A, &csb5_pio); pci_read_config_byte(dev, 0x54, &ultra_enable); + /* If we are in RAID mode (eg AMI MegaIDE) then we can't it + turns out trust the firmware configuration */ + + if ((dev->class >> 8) != PCI_CLASS_STORAGE_IDE) + goto oem_setup_failed; + /* Per Specified Design by OEM, and ASIC Architect */ if ((dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE) || (dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2)) { @@ -173,7 +179,7 @@ dma_pio: ((dma_stat&(1<<(5+unit)))==(1<<(5+unit)))) { u8 dmaspeed = dma_timing; - dma_timing &= ~0xFF; + dma_timing &= ~0xFFU; if ((dmaspeed & 0x20) == 0x20) dmaspeed = XFER_MW_DMA_2; else if ((dmaspeed & 0x21) == 0x21) @@ -187,7 +193,7 @@ dma_pio: } else if (pio_timing) { u8 piospeed = pio_timing; - pio_timing &= ~0xFF; + pio_timing &= ~0xFFU; if ((piospeed & 0x20) == 0x20) piospeed = XFER_PIO_4; else if ((piospeed & 0x22) == 0x22) @@ -208,8 +214,8 @@ dma_pio: oem_setup_failed: - pio_timing &= ~0xFF; - dma_timing &= ~0xFF; + pio_timing &= ~0xFFU; + dma_timing &= ~0xFFU; ultra_timing &= ~(0x0F << (4*unit)); ultra_enable &= ~(0x01 << drive->dn); csb5_pio &= ~(0x0F << (4*drive->dn)); diff --git a/drivers/ieee1394/eth1394.c b/drivers/ieee1394/eth1394.c index 2296d43a24140a..5f026b5d7857f0 100644 --- a/drivers/ieee1394/eth1394.c +++ b/drivers/ieee1394/eth1394.c @@ -47,6 +47,7 @@ #include <linux/types.h> #include <linux/delay.h> #include <linux/init.h> +#include <linux/workqueue.h> #include <linux/netdevice.h> #include <linux/inetdevice.h> @@ -235,6 +236,9 @@ static int ether1394_open(struct net_device *dev) /* This is called after an "ifdown" */ static int ether1394_stop(struct net_device *dev) { + /* flush priv->wake */ + flush_scheduled_work(); + netif_stop_queue(dev); return 0; } @@ -531,6 +535,37 @@ static void ether1394_init_dev(struct net_device *dev) } /* + * Wake the queue up after commonly encountered transmit failure conditions are + * hopefully over. Currently only tlabel exhaustion is accounted for. + */ +static void ether1394_wake_queue(struct work_struct *work) +{ + struct eth1394_priv *priv; + struct hpsb_packet *packet; + + priv = container_of(work, struct eth1394_priv, wake); + packet = hpsb_alloc_packet(0); + + /* This is really bad, but unjam the queue anyway. */ + if (!packet) + goto out; + + packet->host = priv->host; + packet->node_id = priv->wake_node; + /* + * A transaction label is all we really want. If we get one, it almost + * always means we can get a lot more because the ieee1394 core recycled + * a whole batch of tlabels, at last. + */ + if (hpsb_get_tlabel(packet) == 0) + hpsb_free_tlabel(packet); + + hpsb_free_packet(packet); +out: + netif_wake_queue(priv->wake_dev); +} + +/* * This function is called every time a card is found. It is generally called * when the module is installed. This is where we add all of our ethernet * devices. One for each host. @@ -564,16 +599,17 @@ static void ether1394_add_host(struct hpsb_host *host) } SET_MODULE_OWNER(dev); -#if 0 - /* FIXME - Is this the correct parent device anyway? */ - SET_NETDEV_DEV(dev, &host->device); -#endif + + /* This used to be &host->device in Linux 2.6.20 and before. */ + SET_NETDEV_DEV(dev, host->device.parent); priv = netdev_priv(dev); INIT_LIST_HEAD(&priv->ip_node_list); spin_lock_init(&priv->lock); priv->host = host; priv->local_fifo = fifo_addr; + INIT_WORK(&priv->wake, ether1394_wake_queue); + priv->wake_dev = dev; hi = hpsb_create_hostinfo(ð1394_highlevel, host, sizeof(*hi)); if (hi == NULL) { @@ -1390,22 +1426,17 @@ static int ether1394_prep_write_packet(struct hpsb_packet *p, u64 addr, void *data, int tx_len) { p->node_id = node; - p->data = NULL; - p->tcode = TCODE_WRITEB; - p->header[1] = host->node_id << 16 | addr >> 32; - p->header[2] = addr & 0xffffffff; + if (hpsb_get_tlabel(p)) + return -EAGAIN; + p->tcode = TCODE_WRITEB; p->header_size = 16; p->expect_response = 1; - - if (hpsb_get_tlabel(p)) { - ETH1394_PRINT_G(KERN_ERR, "Out of tlabels\n"); - return -1; - } p->header[0] = p->node_id << 16 | p->tlabel << 10 | 1 << 8 | TCODE_WRITEB << 4; - + p->header[1] = host->node_id << 16 | addr >> 32; + p->header[2] = addr & 0xffffffff; p->header[3] = tx_len << 16; p->data_size = (tx_len + 3) & ~3; p->data = data; @@ -1451,7 +1482,7 @@ static int ether1394_send_packet(struct packet_task *ptask, unsigned int tx_len) packet = ether1394_alloc_common_packet(priv->host); if (!packet) - return -1; + return -ENOMEM; if (ptask->tx_type == ETH1394_GASP) { int length = tx_len + 2 * sizeof(quadlet_t); @@ -1462,7 +1493,7 @@ static int ether1394_send_packet(struct packet_task *ptask, unsigned int tx_len) ptask->addr, ptask->skb->data, tx_len)) { hpsb_free_packet(packet); - return -1; + return -EAGAIN; } ptask->packet = packet; @@ -1471,7 +1502,7 @@ static int ether1394_send_packet(struct packet_task *ptask, unsigned int tx_len) if (hpsb_send_packet(packet) < 0) { ether1394_free_packet(packet); - return -1; + return -EIO; } return 0; @@ -1514,13 +1545,18 @@ static void ether1394_complete_cb(void *__ptask) ptask->outstanding_pkts--; if (ptask->outstanding_pkts > 0 && !fail) { - int tx_len; + int tx_len, err; /* Add the encapsulation header to the fragment */ tx_len = ether1394_encapsulate(ptask->skb, ptask->max_payload, &ptask->hdr); - if (ether1394_send_packet(ptask, tx_len)) + err = ether1394_send_packet(ptask, tx_len); + if (err) { + if (err == -EAGAIN) + ETH1394_PRINT_G(KERN_ERR, "Out of tlabels\n"); + ether1394_dg_complete(ptask, 1); + } } else { ether1394_dg_complete(ptask, fail); } @@ -1633,10 +1669,18 @@ static int ether1394_tx(struct sk_buff *skb, struct net_device *dev) /* Add the encapsulation header to the fragment */ tx_len = ether1394_encapsulate(skb, max_payload, &ptask->hdr); dev->trans_start = jiffies; - if (ether1394_send_packet(ptask, tx_len)) - goto fail; + if (ether1394_send_packet(ptask, tx_len)) { + if (dest_node == (LOCAL_BUS | ALL_NODES)) + goto fail; + + /* Most failures of ether1394_send_packet are recoverable. */ + netif_stop_queue(dev); + priv->wake_node = dest_node; + schedule_work(&priv->wake); + kmem_cache_free(packet_task_cache, ptask); + return NETDEV_TX_BUSY; + } - netif_wake_queue(dev); return NETDEV_TX_OK; fail: if (ptask) @@ -1650,9 +1694,6 @@ fail: priv->stats.tx_errors++; spin_unlock_irqrestore(&priv->lock, flags); - if (netif_queue_stopped(dev)) - netif_wake_queue(dev); - /* * FIXME: According to a patch from 2003-02-26, "returning non-zero * causes serious problems" here, allegedly. Before that patch, diff --git a/drivers/ieee1394/eth1394.h b/drivers/ieee1394/eth1394.h index a3439ee7cb4ece..4f3e2dd46f0049 100644 --- a/drivers/ieee1394/eth1394.h +++ b/drivers/ieee1394/eth1394.h @@ -66,6 +66,10 @@ struct eth1394_priv { int bc_dgl; /* Outgoing broadcast datagram label */ struct list_head ip_node_list; /* List of IP capable nodes */ struct unit_directory *ud_list[ALL_NODES]; /* Cached unit dir list */ + + struct work_struct wake; /* Wake up after xmit failure */ + struct net_device *wake_dev; /* Stupid backlink for .wake */ + nodeid_t wake_node; /* Destination of failed xmit */ }; diff --git a/drivers/ieee1394/raw1394.c b/drivers/ieee1394/raw1394.c index d382500f4210b8..f1d05eeb9f5190 100644 --- a/drivers/ieee1394/raw1394.c +++ b/drivers/ieee1394/raw1394.c @@ -936,6 +936,7 @@ static int handle_async_send(struct file_info *fi, struct pending_request *req) struct hpsb_packet *packet; int header_length = req->req.misc & 0xffff; int expect_response = req->req.misc >> 16; + size_t data_size; if (header_length > req->req.length || header_length < 12 || header_length > FIELD_SIZEOF(struct hpsb_packet, header)) { @@ -945,7 +946,8 @@ static int handle_async_send(struct file_info *fi, struct pending_request *req) return sizeof(struct raw1394_request); } - packet = hpsb_alloc_packet(req->req.length - header_length); + data_size = req->req.length - header_length; + packet = hpsb_alloc_packet(data_size); req->packet = packet; if (!packet) return -ENOMEM; @@ -960,7 +962,7 @@ static int handle_async_send(struct file_info *fi, struct pending_request *req) if (copy_from_user (packet->data, int2ptr(req->req.sendb) + header_length, - packet->data_size)) { + data_size)) { req->req.error = RAW1394_ERROR_MEMFAULT; req->req.length = 0; queue_complete_req(req); @@ -974,7 +976,7 @@ static int handle_async_send(struct file_info *fi, struct pending_request *req) packet->host = fi->host; packet->expect_response = expect_response; packet->header_size = header_length; - packet->data_size = req->req.length - header_length; + packet->data_size = data_size; req->req.length = 0; hpsb_set_packet_complete_task(packet, diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c index d0db6f8b520627..ce86ff226a283c 100644 --- a/drivers/ieee1394/sbp2.c +++ b/drivers/ieee1394/sbp2.c @@ -70,6 +70,7 @@ #include <linux/stringify.h> #include <linux/types.h> #include <linux/wait.h> +#include <linux/workqueue.h> #include <asm/byteorder.h> #include <asm/errno.h> diff --git a/drivers/infiniband/core/cache.c b/drivers/infiniband/core/cache.c index 558c9a0fc8b968..e85f7013de5779 100644 --- a/drivers/infiniband/core/cache.c +++ b/drivers/infiniband/core/cache.c @@ -38,6 +38,7 @@ #include <linux/module.h> #include <linux/errno.h> #include <linux/slab.h> +#include <linux/workqueue.h> #include <rdma/ib_cache.h> diff --git a/drivers/infiniband/core/cm.c b/drivers/infiniband/core/cm.c index eff591deeb4642..40c004a2697e62 100644 --- a/drivers/infiniband/core/cm.c +++ b/drivers/infiniband/core/cm.c @@ -306,7 +306,9 @@ static int cm_alloc_id(struct cm_id_private *cm_id_priv) do { spin_lock_irqsave(&cm.lock, flags); ret = idr_get_new_above(&cm.local_id_table, cm_id_priv, - next_id++, &id); + next_id, &id); + if (!ret) + next_id = ((unsigned) id + 1) & MAX_ID_MASK; spin_unlock_irqrestore(&cm.lock, flags); } while( (ret == -EAGAIN) && idr_pre_get(&cm.local_id_table, GFP_KERNEL) ); @@ -1295,26 +1297,29 @@ static struct cm_id_private * cm_match_req(struct cm_work *work, req_msg = (struct cm_req_msg *)work->mad_recv_wc->recv_buf.mad; - /* Check for duplicate REQ and stale connections. */ + /* Check for possible duplicate REQ. */ spin_lock_irqsave(&cm.lock, flags); timewait_info = cm_insert_remote_id(cm_id_priv->timewait_info); - if (!timewait_info) - timewait_info = cm_insert_remote_qpn(cm_id_priv->timewait_info); - if (timewait_info) { cur_cm_id_priv = cm_get_id(timewait_info->work.local_id, timewait_info->work.remote_id); - cm_cleanup_timewait(cm_id_priv->timewait_info); spin_unlock_irqrestore(&cm.lock, flags); if (cur_cm_id_priv) { cm_dup_req_handler(work, cur_cm_id_priv); cm_deref_id(cur_cm_id_priv); - } else - cm_issue_rej(work->port, work->mad_recv_wc, - IB_CM_REJ_STALE_CONN, CM_MSG_RESPONSE_REQ, - NULL, 0); - listen_cm_id_priv = NULL; - goto out; + } + return NULL; + } + + /* Check for stale connections. */ + timewait_info = cm_insert_remote_qpn(cm_id_priv->timewait_info); + if (timewait_info) { + cm_cleanup_timewait(cm_id_priv->timewait_info); + spin_unlock_irqrestore(&cm.lock, flags); + cm_issue_rej(work->port, work->mad_recv_wc, + IB_CM_REJ_STALE_CONN, CM_MSG_RESPONSE_REQ, + NULL, 0); + return NULL; } /* Find matching listen request. */ diff --git a/drivers/infiniband/core/device.c b/drivers/infiniband/core/device.c index 592c90aa31830e..3ada17c0f23921 100644 --- a/drivers/infiniband/core/device.c +++ b/drivers/infiniband/core/device.c @@ -40,6 +40,7 @@ #include <linux/slab.h> #include <linux/init.h> #include <linux/mutex.h> +#include <linux/workqueue.h> #include "core_priv.h" @@ -149,6 +150,18 @@ static int alloc_name(char *name) return 0; } +static int start_port(struct ib_device *device) +{ + return (device->node_type == RDMA_NODE_IB_SWITCH) ? 0 : 1; +} + + +static int end_port(struct ib_device *device) +{ + return (device->node_type == RDMA_NODE_IB_SWITCH) ? + 0 : device->phys_port_cnt; +} + /** * ib_alloc_device - allocate an IB device struct * @size:size of structure to allocate @@ -208,6 +221,45 @@ static int add_client_context(struct ib_device *device, struct ib_client *client return 0; } +static int read_port_table_lengths(struct ib_device *device) +{ + struct ib_port_attr *tprops = NULL; + int num_ports, ret = -ENOMEM; + u8 port_index; + + tprops = kmalloc(sizeof *tprops, GFP_KERNEL); + if (!tprops) + goto out; + + num_ports = end_port(device) - start_port(device) + 1; + + device->pkey_tbl_len = kmalloc(sizeof *device->pkey_tbl_len * num_ports, + GFP_KERNEL); + device->gid_tbl_len = kmalloc(sizeof *device->gid_tbl_len * num_ports, + GFP_KERNEL); + if (!device->pkey_tbl_len || !device->gid_tbl_len) + goto err; + + for (port_index = 0; port_index < num_ports; ++port_index) { + ret = ib_query_port(device, port_index + start_port(device), + tprops); + if (ret) + goto err; + device->pkey_tbl_len[port_index] = tprops->pkey_tbl_len; + device->gid_tbl_len[port_index] = tprops->gid_tbl_len; + } + + ret = 0; + goto out; + +err: + kfree(device->gid_tbl_len); + kfree(device->pkey_tbl_len); +out: + kfree(tprops); + return ret; +} + /** * ib_register_device - Register an IB device with IB core * @device:Device to register @@ -239,10 +291,19 @@ int ib_register_device(struct ib_device *device) spin_lock_init(&device->event_handler_lock); spin_lock_init(&device->client_data_lock); + ret = read_port_table_lengths(device); + if (ret) { + printk(KERN_WARNING "Couldn't create table lengths cache for device %s\n", + device->name); + goto out; + } + ret = ib_device_register_sysfs(device); if (ret) { printk(KERN_WARNING "Couldn't register device %s with driver model\n", device->name); + kfree(device->gid_tbl_len); + kfree(device->pkey_tbl_len); goto out; } @@ -284,6 +345,9 @@ void ib_unregister_device(struct ib_device *device) list_del(&device->core_list); + kfree(device->gid_tbl_len); + kfree(device->pkey_tbl_len); + mutex_unlock(&device_mutex); spin_lock_irqsave(&device->client_data_lock, flags); @@ -506,10 +570,7 @@ int ib_query_port(struct ib_device *device, u8 port_num, struct ib_port_attr *port_attr) { - if (device->node_type == RDMA_NODE_IB_SWITCH) { - if (port_num) - return -EINVAL; - } else if (port_num < 1 || port_num > device->phys_port_cnt) + if (port_num < start_port(device) || port_num > end_port(device)) return -EINVAL; return device->query_port(device, port_num, port_attr); @@ -581,10 +642,7 @@ int ib_modify_port(struct ib_device *device, u8 port_num, int port_modify_mask, struct ib_port_modify *port_modify) { - if (device->node_type == RDMA_NODE_IB_SWITCH) { - if (port_num) - return -EINVAL; - } else if (port_num < 1 || port_num > device->phys_port_cnt) + if (port_num < start_port(device) || port_num > end_port(device)) return -EINVAL; return device->modify_port(device, port_num, port_modify_mask, @@ -592,6 +650,68 @@ int ib_modify_port(struct ib_device *device, } EXPORT_SYMBOL(ib_modify_port); +/** + * ib_find_gid - Returns the port number and GID table index where + * a specified GID value occurs. + * @device: The device to query. + * @gid: The GID value to search for. + * @port_num: The port number of the device where the GID value was found. + * @index: The index into the GID table where the GID was found. This + * parameter may be NULL. + */ +int ib_find_gid(struct ib_device *device, union ib_gid *gid, + u8 *port_num, u16 *index) +{ + union ib_gid tmp_gid; + int ret, port, i; + + for (port = start_port(device); port <= end_port(device); ++port) { + for (i = 0; i < device->gid_tbl_len[port - start_port(device)]; ++i) { + ret = ib_query_gid(device, port, i, &tmp_gid); + if (ret) + return ret; + if (!memcmp(&tmp_gid, gid, sizeof *gid)) { + *port_num = port; + if (index) + *index = i; + return 0; + } + } + } + + return -ENOENT; +} +EXPORT_SYMBOL(ib_find_gid); + +/** + * ib_find_pkey - Returns the PKey table index where a specified + * PKey value occurs. + * @device: The device to query. + * @port_num: The port number of the device to search for the PKey. + * @pkey: The PKey value to search for. + * @index: The index into the PKey table where the PKey was found. + */ +int ib_find_pkey(struct ib_device *device, + u8 port_num, u16 pkey, u16 *index) +{ + int ret, i; + u16 tmp_pkey; + + for (i = 0; i < device->pkey_tbl_len[port_num - start_port(device)]; ++i) { + ret = ib_query_pkey(device, port_num, i, &tmp_pkey); + if (ret) + return ret; + + if (pkey == tmp_pkey) { + *index = i; + return 0; + } + } + + return -ENOENT; +} +EXPORT_SYMBOL(ib_find_pkey); + static int __init ib_core_init(void) { int ret; diff --git a/drivers/infiniband/core/umem.c b/drivers/infiniband/core/umem.c index f32ca5fbb26bcc..b4aec5103c9921 100644 --- a/drivers/infiniband/core/umem.c +++ b/drivers/infiniband/core/umem.c @@ -36,6 +36,7 @@ #include <linux/mm.h> #include <linux/dma-mapping.h> +#include <linux/sched.h> #include "uverbs.h" @@ -209,8 +210,10 @@ void ib_umem_release(struct ib_umem *umem) __ib_umem_release(umem->context->device, umem, 1); mm = get_task_mm(current); - if (!mm) + if (!mm) { + kfree(umem); return; + } diff = PAGE_ALIGN(umem->length + umem->offset) >> PAGE_SHIFT; diff --git a/drivers/infiniband/hw/ehca/ehca_mrmw.c b/drivers/infiniband/hw/ehca/ehca_mrmw.c index 84c5bb4985634a..add79bd44e398b 100644 --- a/drivers/infiniband/hw/ehca/ehca_mrmw.c +++ b/drivers/infiniband/hw/ehca/ehca_mrmw.c @@ -2050,13 +2050,10 @@ int ehca_mrmw_map_hrc_alloc(const u64 hipz_rc) switch (hipz_rc) { case H_SUCCESS: /* successful completion */ return 0; - case H_ADAPTER_PARM: /* invalid adapter handle */ - case H_RT_PARM: /* invalid resource type */ case H_NOT_ENOUGH_RESOURCES: /* insufficient resources */ - case H_MLENGTH_PARM: /* invalid memory length */ - case H_MEM_ACCESS_PARM: /* invalid access controls */ case H_CONSTRAINED: /* resource constraint */ - return -EINVAL; + case H_NO_MEM: + return -ENOMEM; case H_BUSY: /* long busy */ return -EBUSY; default: diff --git a/drivers/infiniband/hw/ehca/hcp_if.c b/drivers/infiniband/hw/ehca/hcp_if.c index 7f0beec74f7006..5766ae3a202995 100644 --- a/drivers/infiniband/hw/ehca/hcp_if.c +++ b/drivers/infiniband/hw/ehca/hcp_if.c @@ -331,7 +331,7 @@ u64 hipz_h_alloc_resource_qp(const struct ipz_adapter_handle adapter_handle, 0); qp->ipz_qp_handle.handle = outs[0]; qp->real_qp_num = (u32)outs[1]; - parms->act_nr_send_sges = + parms->act_nr_send_wqes = (u16)EHCA_BMASK_GET(H_ALL_RES_QP_ACT_OUTST_SEND_WR, outs[2]); parms->act_nr_recv_wqes = (u16)EHCA_BMASK_GET(H_ALL_RES_QP_ACT_OUTST_RECV_WR, outs[2]); diff --git a/drivers/infiniband/hw/ipath/ipath_verbs_mcast.c b/drivers/infiniband/hw/ipath/ipath_verbs_mcast.c index 085e28b939ec56..dd691cfa507932 100644 --- a/drivers/infiniband/hw/ipath/ipath_verbs_mcast.c +++ b/drivers/infiniband/hw/ipath/ipath_verbs_mcast.c @@ -165,10 +165,9 @@ static int ipath_mcast_add(struct ipath_ibdev *dev, { struct rb_node **n = &mcast_tree.rb_node; struct rb_node *pn = NULL; - unsigned long flags; int ret; - spin_lock_irqsave(&mcast_lock, flags); + spin_lock_irq(&mcast_lock); while (*n) { struct ipath_mcast *tmcast; @@ -228,7 +227,7 @@ static int ipath_mcast_add(struct ipath_ibdev *dev, ret = 0; bail: - spin_unlock_irqrestore(&mcast_lock, flags); + spin_unlock_irq(&mcast_lock); return ret; } @@ -289,17 +288,16 @@ int ipath_multicast_detach(struct ib_qp *ibqp, union ib_gid *gid, u16 lid) struct ipath_mcast *mcast = NULL; struct ipath_mcast_qp *p, *tmp; struct rb_node *n; - unsigned long flags; int last = 0; int ret; - spin_lock_irqsave(&mcast_lock, flags); + spin_lock_irq(&mcast_lock); /* Find the GID in the mcast table. */ n = mcast_tree.rb_node; while (1) { if (n == NULL) { - spin_unlock_irqrestore(&mcast_lock, flags); + spin_unlock_irq(&mcast_lock); ret = -EINVAL; goto bail; } @@ -334,7 +332,7 @@ int ipath_multicast_detach(struct ib_qp *ibqp, union ib_gid *gid, u16 lid) break; } - spin_unlock_irqrestore(&mcast_lock, flags); + spin_unlock_irq(&mcast_lock); if (p) { /* @@ -348,9 +346,9 @@ int ipath_multicast_detach(struct ib_qp *ibqp, union ib_gid *gid, u16 lid) atomic_dec(&mcast->refcount); wait_event(mcast->wait, !atomic_read(&mcast->refcount)); ipath_mcast_free(mcast); - spin_lock(&dev->n_mcast_grps_lock); + spin_lock_irq(&dev->n_mcast_grps_lock); dev->n_mcast_grps_allocated--; - spin_unlock(&dev->n_mcast_grps_lock); + spin_unlock_irq(&dev->n_mcast_grps_lock); } ret = 0; diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c index 5cd70690845078..dc137dec230802 100644 --- a/drivers/infiniband/hw/mlx4/qp.c +++ b/drivers/infiniband/hw/mlx4/qp.c @@ -188,14 +188,32 @@ static int send_wqe_overhead(enum ib_qp_type type) } } -static int set_qp_size(struct mlx4_ib_dev *dev, struct ib_qp_cap *cap, - enum ib_qp_type type, struct mlx4_ib_qp *qp) +static int set_rq_size(struct mlx4_ib_dev *dev, struct ib_qp_cap *cap, + struct mlx4_ib_qp *qp) { - /* Sanity check QP size before proceeding */ + /* Sanity check RQ size before proceeding */ + if (cap->max_recv_wr > dev->dev->caps.max_wqes || + cap->max_recv_sge > dev->dev->caps.max_rq_sg) + return -EINVAL; + + qp->rq.max = cap->max_recv_wr ? roundup_pow_of_two(cap->max_recv_wr) : 0; + + qp->rq.wqe_shift = ilog2(roundup_pow_of_two(cap->max_recv_sge * + sizeof (struct mlx4_wqe_data_seg))); + qp->rq.max_gs = (1 << qp->rq.wqe_shift) / sizeof (struct mlx4_wqe_data_seg); + + cap->max_recv_wr = qp->rq.max; + cap->max_recv_sge = qp->rq.max_gs; + + return 0; +} + +static int set_kernel_sq_size(struct mlx4_ib_dev *dev, struct ib_qp_cap *cap, + enum ib_qp_type type, struct mlx4_ib_qp *qp) +{ + /* Sanity check SQ size before proceeding */ if (cap->max_send_wr > dev->dev->caps.max_wqes || - cap->max_recv_wr > dev->dev->caps.max_wqes || cap->max_send_sge > dev->dev->caps.max_sq_sg || - cap->max_recv_sge > dev->dev->caps.max_rq_sg || cap->max_inline_data + send_wqe_overhead(type) + sizeof (struct mlx4_wqe_inline_seg) > dev->dev->caps.max_sq_desc_sz) return -EINVAL; @@ -208,12 +226,7 @@ static int set_qp_size(struct mlx4_ib_dev *dev, struct ib_qp_cap *cap, cap->max_send_sge + 2 > dev->dev->caps.max_sq_sg) return -EINVAL; - qp->rq.max = cap->max_recv_wr ? roundup_pow_of_two(cap->max_recv_wr) : 0; - qp->sq.max = cap->max_send_wr ? roundup_pow_of_two(cap->max_send_wr) : 0; - - qp->rq.wqe_shift = ilog2(roundup_pow_of_two(cap->max_recv_sge * - sizeof (struct mlx4_wqe_data_seg))); - qp->rq.max_gs = (1 << qp->rq.wqe_shift) / sizeof (struct mlx4_wqe_data_seg); + qp->sq.max = cap->max_send_wr ? roundup_pow_of_two(cap->max_send_wr) : 1; qp->sq.wqe_shift = ilog2(roundup_pow_of_two(max(cap->max_send_sge * sizeof (struct mlx4_wqe_data_seg), @@ -233,23 +246,31 @@ static int set_qp_size(struct mlx4_ib_dev *dev, struct ib_qp_cap *cap, qp->sq.offset = 0; } - cap->max_send_wr = qp->sq.max; - cap->max_recv_wr = qp->rq.max; - cap->max_send_sge = qp->sq.max_gs; - cap->max_recv_sge = qp->rq.max_gs; + cap->max_send_wr = qp->sq.max; + cap->max_send_sge = qp->sq.max_gs; cap->max_inline_data = (1 << qp->sq.wqe_shift) - send_wqe_overhead(type) - sizeof (struct mlx4_wqe_inline_seg); return 0; } +static int set_user_sq_size(struct mlx4_ib_qp *qp, + struct mlx4_ib_create_qp *ucmd) +{ + qp->sq.max = 1 << ucmd->log_sq_bb_count; + qp->sq.wqe_shift = ucmd->log_sq_stride; + + qp->buf_size = (qp->rq.max << qp->rq.wqe_shift) + + (qp->sq.max << qp->sq.wqe_shift); + + return 0; +} + static int create_qp_common(struct mlx4_ib_dev *dev, struct ib_pd *pd, struct ib_qp_init_attr *init_attr, struct ib_udata *udata, int sqpn, struct mlx4_ib_qp *qp) { - struct mlx4_wqe_ctrl_seg *ctrl; int err; - int i; mutex_init(&qp->mutex); spin_lock_init(&qp->sq.lock); @@ -264,7 +285,7 @@ static int create_qp_common(struct mlx4_ib_dev *dev, struct ib_pd *pd, qp->sq.head = 0; qp->sq.tail = 0; - err = set_qp_size(dev, &init_attr->cap, init_attr->qp_type, qp); + err = set_rq_size(dev, &init_attr->cap, qp); if (err) goto err; @@ -276,6 +297,10 @@ static int create_qp_common(struct mlx4_ib_dev *dev, struct ib_pd *pd, goto err; } + err = set_user_sq_size(qp, &ucmd); + if (err) + goto err; + qp->umem = ib_umem_get(pd->uobject->context, ucmd.buf_addr, qp->buf_size, 0); if (IS_ERR(qp->umem)) { @@ -292,16 +317,24 @@ static int create_qp_common(struct mlx4_ib_dev *dev, struct ib_pd *pd, if (err) goto err_mtt; - err = mlx4_ib_db_map_user(to_mucontext(pd->uobject->context), - ucmd.db_addr, &qp->db); - if (err) - goto err_mtt; + if (!init_attr->srq) { + err = mlx4_ib_db_map_user(to_mucontext(pd->uobject->context), + ucmd.db_addr, &qp->db); + if (err) + goto err_mtt; + } } else { - err = mlx4_ib_db_alloc(dev, &qp->db, 0); + err = set_kernel_sq_size(dev, &init_attr->cap, init_attr->qp_type, qp); if (err) goto err; - *qp->db.db = 0; + if (!init_attr->srq) { + err = mlx4_ib_db_alloc(dev, &qp->db, 0); + if (err) + goto err; + + *qp->db.db = 0; + } if (mlx4_buf_alloc(dev->dev, qp->buf_size, PAGE_SIZE * 2, &qp->buf)) { err = -ENOMEM; @@ -317,11 +350,6 @@ static int create_qp_common(struct mlx4_ib_dev *dev, struct ib_pd *pd, if (err) goto err_mtt; - for (i = 0; i < qp->sq.max; ++i) { - ctrl = get_send_wqe(qp, i); - ctrl->owner_opcode = cpu_to_be32(1 << 31); - } - qp->sq.wrid = kmalloc(qp->sq.max * sizeof (u64), GFP_KERNEL); qp->rq.wrid = kmalloc(qp->rq.max * sizeof (u64), GFP_KERNEL); @@ -355,7 +383,7 @@ static int create_qp_common(struct mlx4_ib_dev *dev, struct ib_pd *pd, return 0; err_wrid: - if (pd->uobject) + if (pd->uobject && !init_attr->srq) mlx4_ib_db_unmap_user(to_mucontext(pd->uobject->context), &qp->db); else { kfree(qp->sq.wrid); @@ -372,7 +400,7 @@ err_buf: mlx4_buf_free(dev->dev, qp->buf_size, &qp->buf); err_db: - if (!pd->uobject) + if (!pd->uobject && !init_attr->srq) mlx4_ib_db_free(dev, &qp->db); err: @@ -450,14 +478,16 @@ static void destroy_qp_common(struct mlx4_ib_dev *dev, struct mlx4_ib_qp *qp, mlx4_mtt_cleanup(dev->dev, &qp->mtt); if (is_user) { - mlx4_ib_db_unmap_user(to_mucontext(qp->ibqp.uobject->context), - &qp->db); + if (!qp->ibqp.srq) + mlx4_ib_db_unmap_user(to_mucontext(qp->ibqp.uobject->context), + &qp->db); ib_umem_release(qp->umem); } else { kfree(qp->sq.wrid); kfree(qp->rq.wrid); mlx4_buf_free(dev->dev, qp->buf_size, &qp->buf); - mlx4_ib_db_free(dev, &qp->db); + if (!qp->ibqp.srq) + mlx4_ib_db_free(dev, &qp->db); } } @@ -573,7 +603,7 @@ static int to_mlx4_st(enum ib_qp_type type) } } -static __be32 to_mlx4_access_flags(struct mlx4_ib_qp *qp, struct ib_qp_attr *attr, +static __be32 to_mlx4_access_flags(struct mlx4_ib_qp *qp, const struct ib_qp_attr *attr, int attr_mask) { u8 dest_rd_atomic; @@ -603,7 +633,7 @@ static __be32 to_mlx4_access_flags(struct mlx4_ib_qp *qp, struct ib_qp_attr *att return cpu_to_be32(hw_access_flags); } -static void store_sqp_attrs(struct mlx4_ib_sqp *sqp, struct ib_qp_attr *attr, +static void store_sqp_attrs(struct mlx4_ib_sqp *sqp, const struct ib_qp_attr *attr, int attr_mask) { if (attr_mask & IB_QP_PKEY_INDEX) @@ -619,7 +649,7 @@ static void mlx4_set_sched(struct mlx4_qp_path *path, u8 port) path->sched_queue = (path->sched_queue & 0xbf) | ((port - 1) << 6); } -static int mlx4_set_path(struct mlx4_ib_dev *dev, struct ib_ah_attr *ah, +static int mlx4_set_path(struct mlx4_ib_dev *dev, const struct ib_ah_attr *ah, struct mlx4_qp_path *path, u8 port) { path->grh_mylmc = ah->src_path_bits & 0x7f; @@ -655,14 +685,14 @@ static int mlx4_set_path(struct mlx4_ib_dev *dev, struct ib_ah_attr *ah, return 0; } -int mlx4_ib_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, - int attr_mask, struct ib_udata *udata) +static int __mlx4_ib_modify_qp(struct ib_qp *ibqp, + const struct ib_qp_attr *attr, int attr_mask, + enum ib_qp_state cur_state, enum ib_qp_state new_state) { struct mlx4_ib_dev *dev = to_mdev(ibqp->device); struct mlx4_ib_qp *qp = to_mqp(ibqp); struct mlx4_qp_context *context; enum mlx4_qp_optpar optpar = 0; - enum ib_qp_state cur_state, new_state; int sqd_event; int err = -EINVAL; @@ -670,34 +700,6 @@ int mlx4_ib_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, if (!context) return -ENOMEM; - mutex_lock(&qp->mutex); - - cur_state = attr_mask & IB_QP_CUR_STATE ? attr->cur_qp_state : qp->state; - new_state = attr_mask & IB_QP_STATE ? attr->qp_state : cur_state; - - if (!ib_modify_qp_is_ok(cur_state, new_state, ibqp->qp_type, attr_mask)) - goto out; - - if ((attr_mask & IB_QP_PKEY_INDEX) && - attr->pkey_index >= dev->dev->caps.pkey_table_len) { - goto out; - } - - if ((attr_mask & IB_QP_PORT) && - (attr->port_num == 0 || attr->port_num > dev->dev->caps.num_ports)) { - goto out; - } - - if (attr_mask & IB_QP_MAX_QP_RD_ATOMIC && - attr->max_rd_atomic > dev->dev->caps.max_qp_init_rdma) { - goto out; - } - - if (attr_mask & IB_QP_MAX_DEST_RD_ATOMIC && - attr->max_dest_rd_atomic > 1 << dev->dev->caps.max_qp_dest_rdma) { - goto out; - } - context->flags = cpu_to_be32((to_mlx4_state(new_state) << 28) | (to_mlx4_st(ibqp->qp_type) << 16)); context->flags |= cpu_to_be32(1 << 8); /* DE? */ @@ -849,7 +851,7 @@ int mlx4_ib_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, if (ibqp->srq) context->srqn = cpu_to_be32(1 << 24 | to_msrq(ibqp->srq)->msrq.srqn); - if (cur_state == IB_QPS_RESET && new_state == IB_QPS_INIT) + if (!ibqp->srq && cur_state == IB_QPS_RESET && new_state == IB_QPS_INIT) context->db_rec_addr = cpu_to_be64(qp->db.dma); if (cur_state == IB_QPS_INIT && @@ -869,6 +871,21 @@ int mlx4_ib_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, else sqd_event = 0; + /* + * Before passing a kernel QP to the HW, make sure that the + * ownership bits of the send queue are set so that the + * hardware doesn't start processing stale work requests. + */ + if (!ibqp->uobject && cur_state == IB_QPS_RESET && new_state == IB_QPS_INIT) { + struct mlx4_wqe_ctrl_seg *ctrl; + int i; + + for (i = 0; i < qp->sq.max; ++i) { + ctrl = get_send_wqe(qp, i); + ctrl->owner_opcode = cpu_to_be32(1 << 31); + } + } + err = mlx4_qp_modify(dev->dev, &qp->mtt, to_mlx4_state(cur_state), to_mlx4_state(new_state), context, optpar, sqd_event, &qp->mqp); @@ -916,15 +933,89 @@ int mlx4_ib_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, qp->rq.tail = 0; qp->sq.head = 0; qp->sq.tail = 0; - *qp->db.db = 0; + if (!ibqp->srq) + *qp->db.db = 0; } out: - mutex_unlock(&qp->mutex); kfree(context); return err; } +static const struct ib_qp_attr mlx4_ib_qp_attr = { .port_num = 1 }; +static const int mlx4_ib_qp_attr_mask_table[IB_QPT_UD + 1] = { + [IB_QPT_UD] = (IB_QP_PKEY_INDEX | + IB_QP_PORT | + IB_QP_QKEY), + [IB_QPT_UC] = (IB_QP_PKEY_INDEX | + IB_QP_PORT | + IB_QP_ACCESS_FLAGS), + [IB_QPT_RC] = (IB_QP_PKEY_INDEX | + IB_QP_PORT | + IB_QP_ACCESS_FLAGS), + [IB_QPT_SMI] = (IB_QP_PKEY_INDEX | + IB_QP_QKEY), + [IB_QPT_GSI] = (IB_QP_PKEY_INDEX | + IB_QP_QKEY), +}; + +int mlx4_ib_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, + int attr_mask, struct ib_udata *udata) +{ + struct mlx4_ib_dev *dev = to_mdev(ibqp->device); + struct mlx4_ib_qp *qp = to_mqp(ibqp); + enum ib_qp_state cur_state, new_state; + int err = -EINVAL; + + mutex_lock(&qp->mutex); + + cur_state = attr_mask & IB_QP_CUR_STATE ? attr->cur_qp_state : qp->state; + new_state = attr_mask & IB_QP_STATE ? attr->qp_state : cur_state; + + if (!ib_modify_qp_is_ok(cur_state, new_state, ibqp->qp_type, attr_mask)) + goto out; + + if ((attr_mask & IB_QP_PKEY_INDEX) && + attr->pkey_index >= dev->dev->caps.pkey_table_len) { + goto out; + } + + if ((attr_mask & IB_QP_PORT) && + (attr->port_num == 0 || attr->port_num > dev->dev->caps.num_ports)) { + goto out; + } + + if (attr_mask & IB_QP_MAX_QP_RD_ATOMIC && + attr->max_rd_atomic > dev->dev->caps.max_qp_init_rdma) { + goto out; + } + + if (attr_mask & IB_QP_MAX_DEST_RD_ATOMIC && + attr->max_dest_rd_atomic > dev->dev->caps.max_qp_dest_rdma) { + goto out; + } + + if (cur_state == new_state && cur_state == IB_QPS_RESET) { + err = 0; + goto out; + } + + if (cur_state == IB_QPS_RESET && new_state == IB_QPS_ERR) { + err = __mlx4_ib_modify_qp(ibqp, &mlx4_ib_qp_attr, + mlx4_ib_qp_attr_mask_table[ibqp->qp_type], + IB_QPS_RESET, IB_QPS_INIT); + if (err) + goto out; + cur_state = IB_QPS_INIT; + } + + err = __mlx4_ib_modify_qp(ibqp, attr, attr_mask, cur_state, new_state); + +out: + mutex_unlock(&qp->mutex); + return err; +} + static int build_mlx_header(struct mlx4_ib_sqp *sqp, struct ib_send_wr *wr, void *wqe) { @@ -952,6 +1043,7 @@ static int build_mlx_header(struct mlx4_ib_sqp *sqp, struct ib_send_wr *wr, (be32_to_cpu(ah->av.sl_tclass_flowlabel) >> 20) & 0xff; sqp->ud_header.grh.flow_label = ah->av.sl_tclass_flowlabel & cpu_to_be32(0xfffff); + sqp->ud_header.grh.hop_limit = ah->av.hop_limit; ib_get_cached_gid(ib_dev, be32_to_cpu(ah->av.port_pd) >> 24, ah->av.gid_index, &sqp->ud_header.grh.source_gid); memcpy(sqp->ud_header.grh.destination_gid.raw, @@ -1192,7 +1284,7 @@ int mlx4_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr, */ wmb(); - if (wr->opcode < 0 || wr->opcode > ARRAY_SIZE(mlx4_ib_opcode)) { + if (wr->opcode < 0 || wr->opcode >= ARRAY_SIZE(mlx4_ib_opcode)) { err = -EINVAL; goto out; } diff --git a/drivers/infiniband/hw/mlx4/srq.c b/drivers/infiniband/hw/mlx4/srq.c index 42ab4a801d6a9b..12fac1c8989dc3 100644 --- a/drivers/infiniband/hw/mlx4/srq.c +++ b/drivers/infiniband/hw/mlx4/srq.c @@ -297,6 +297,12 @@ int mlx4_ib_post_srq_recv(struct ib_srq *ibsrq, struct ib_recv_wr *wr, break; } + if (unlikely(srq->head == srq->tail)) { + err = -ENOMEM; + *bad_wr = wr; + break; + } + srq->wrid[srq->head] = wr->wr_id; next = get_wqe(srq, srq->head); diff --git a/drivers/infiniband/hw/mlx4/user.h b/drivers/infiniband/hw/mlx4/user.h index 5b8eddc9fa83e4..88c72d56368b8a 100644 --- a/drivers/infiniband/hw/mlx4/user.h +++ b/drivers/infiniband/hw/mlx4/user.h @@ -39,7 +39,7 @@ * Increment this value if any changes that break userspace ABI * compatibility are made. */ -#define MLX4_IB_UVERBS_ABI_VERSION 1 +#define MLX4_IB_UVERBS_ABI_VERSION 2 /* * Make sure that all structs defined in this file remain laid out so @@ -87,6 +87,9 @@ struct mlx4_ib_create_srq_resp { struct mlx4_ib_create_qp { __u64 buf_addr; __u64 db_addr; + __u8 log_sq_bb_count; + __u8 log_sq_stride; + __u8 reserved[6]; }; #endif /* MLX4_IB_USER_H */ diff --git a/drivers/infiniband/hw/mthca/mthca_av.c b/drivers/infiniband/hw/mthca/mthca_av.c index 27caf3b0648a64..4b111a852ff65b 100644 --- a/drivers/infiniband/hw/mthca/mthca_av.c +++ b/drivers/infiniband/hw/mthca/mthca_av.c @@ -279,6 +279,7 @@ int mthca_read_ah(struct mthca_dev *dev, struct mthca_ah *ah, (be32_to_cpu(ah->av->sl_tclass_flowlabel) >> 20) & 0xff; header->grh.flow_label = ah->av->sl_tclass_flowlabel & cpu_to_be32(0xfffff); + header->grh.hop_limit = ah->av->hop_limit; ib_get_cached_gid(&dev->ib_dev, be32_to_cpu(ah->av->port_pd) >> 24, ah->av->gid_index % dev->limits.gid_table_len, diff --git a/drivers/infiniband/hw/mthca/mthca_cmd.c b/drivers/infiniband/hw/mthca/mthca_cmd.c index 71314460b11e63..38102520ffb376 100644 --- a/drivers/infiniband/hw/mthca/mthca_cmd.c +++ b/drivers/infiniband/hw/mthca/mthca_cmd.c @@ -37,6 +37,7 @@ #include <linux/completion.h> #include <linux/pci.h> #include <linux/errno.h> +#include <linux/sched.h> #include <asm/io.h> #include <rdma/ib_mad.h> diff --git a/drivers/infiniband/hw/mthca/mthca_cq.c b/drivers/infiniband/hw/mthca/mthca_cq.c index ca224d018af21f..be6e1e03bdab13 100644 --- a/drivers/infiniband/hw/mthca/mthca_cq.c +++ b/drivers/infiniband/hw/mthca/mthca_cq.c @@ -37,6 +37,7 @@ */ #include <linux/hardirq.h> +#include <linux/sched.h> #include <asm/io.h> diff --git a/drivers/infiniband/hw/mthca/mthca_main.c b/drivers/infiniband/hw/mthca/mthca_main.c index 773145e299478e..aa563e61de65cb 100644 --- a/drivers/infiniband/hw/mthca/mthca_main.c +++ b/drivers/infiniband/hw/mthca/mthca_main.c @@ -1250,12 +1250,14 @@ static void __mthca_remove_one(struct pci_dev *pdev) int __mthca_restart_one(struct pci_dev *pdev) { struct mthca_dev *mdev; + int hca_type; mdev = pci_get_drvdata(pdev); if (!mdev) return -ENODEV; + hca_type = mdev->hca_type; __mthca_remove_one(pdev); - return __mthca_init_one(pdev, mdev->hca_type); + return __mthca_init_one(pdev, hca_type); } static int __devinit mthca_init_one(struct pci_dev *pdev, diff --git a/drivers/infiniband/hw/mthca/mthca_memfree.c b/drivers/infiniband/hw/mthca/mthca_memfree.c index 48f7c65e9aedb3..e61f3e626980e5 100644 --- a/drivers/infiniband/hw/mthca/mthca_memfree.c +++ b/drivers/infiniband/hw/mthca/mthca_memfree.c @@ -36,6 +36,7 @@ #include <linux/mm.h> #include <linux/scatterlist.h> +#include <linux/sched.h> #include <asm/page.h> diff --git a/drivers/infiniband/hw/mthca/mthca_qp.c b/drivers/infiniband/hw/mthca/mthca_qp.c index 72fabb822f1c0d..eef415b12b2ebd 100644 --- a/drivers/infiniband/hw/mthca/mthca_qp.c +++ b/drivers/infiniband/hw/mthca/mthca_qp.c @@ -37,6 +37,7 @@ #include <linux/string.h> #include <linux/slab.h> +#include <linux/sched.h> #include <asm/io.h> @@ -295,7 +296,7 @@ static int to_mthca_st(int transport) } } -static void store_attrs(struct mthca_sqp *sqp, struct ib_qp_attr *attr, +static void store_attrs(struct mthca_sqp *sqp, const struct ib_qp_attr *attr, int attr_mask) { if (attr_mask & IB_QP_PKEY_INDEX) @@ -327,7 +328,7 @@ static void init_port(struct mthca_dev *dev, int port) mthca_warn(dev, "INIT_IB returned status %02x.\n", status); } -static __be32 get_hw_access_flags(struct mthca_qp *qp, struct ib_qp_attr *attr, +static __be32 get_hw_access_flags(struct mthca_qp *qp, const struct ib_qp_attr *attr, int attr_mask) { u8 dest_rd_atomic; @@ -510,7 +511,7 @@ out: return err; } -static int mthca_path_set(struct mthca_dev *dev, struct ib_ah_attr *ah, +static int mthca_path_set(struct mthca_dev *dev, const struct ib_ah_attr *ah, struct mthca_qp_path *path, u8 port) { path->g_mylmc = ah->src_path_bits & 0x7f; @@ -538,12 +539,12 @@ static int mthca_path_set(struct mthca_dev *dev, struct ib_ah_attr *ah, return 0; } -int mthca_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, int attr_mask, - struct ib_udata *udata) +static int __mthca_modify_qp(struct ib_qp *ibqp, + const struct ib_qp_attr *attr, int attr_mask, + enum ib_qp_state cur_state, enum ib_qp_state new_state) { struct mthca_dev *dev = to_mdev(ibqp->device); struct mthca_qp *qp = to_mqp(ibqp); - enum ib_qp_state cur_state, new_state; struct mthca_mailbox *mailbox; struct mthca_qp_param *qp_param; struct mthca_qp_context *qp_context; @@ -551,60 +552,6 @@ int mthca_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, int attr_mask, u8 status; int err = -EINVAL; - mutex_lock(&qp->mutex); - - if (attr_mask & IB_QP_CUR_STATE) { - cur_state = attr->cur_qp_state; - } else { - spin_lock_irq(&qp->sq.lock); - spin_lock(&qp->rq.lock); - cur_state = qp->state; - spin_unlock(&qp->rq.lock); - spin_unlock_irq(&qp->sq.lock); - } - - new_state = attr_mask & IB_QP_STATE ? attr->qp_state : cur_state; - - if (!ib_modify_qp_is_ok(cur_state, new_state, ibqp->qp_type, attr_mask)) { - mthca_dbg(dev, "Bad QP transition (transport %d) " - "%d->%d with attr 0x%08x\n", - qp->transport, cur_state, new_state, - attr_mask); - goto out; - } - - if (cur_state == new_state && cur_state == IB_QPS_RESET) { - err = 0; - goto out; - } - - if ((attr_mask & IB_QP_PKEY_INDEX) && - attr->pkey_index >= dev->limits.pkey_table_len) { - mthca_dbg(dev, "P_Key index (%u) too large. max is %d\n", - attr->pkey_index, dev->limits.pkey_table_len-1); - goto out; - } - - if ((attr_mask & IB_QP_PORT) && - (attr->port_num == 0 || attr->port_num > dev->limits.num_ports)) { - mthca_dbg(dev, "Port number (%u) is invalid\n", attr->port_num); - goto out; - } - - if (attr_mask & IB_QP_MAX_QP_RD_ATOMIC && - attr->max_rd_atomic > dev->limits.max_qp_init_rdma) { - mthca_dbg(dev, "Max rdma_atomic as initiator %u too large (max is %d)\n", - attr->max_rd_atomic, dev->limits.max_qp_init_rdma); - goto out; - } - - if (attr_mask & IB_QP_MAX_DEST_RD_ATOMIC && - attr->max_dest_rd_atomic > 1 << dev->qp_table.rdb_shift) { - mthca_dbg(dev, "Max rdma_atomic as responder %u too large (max %d)\n", - attr->max_dest_rd_atomic, 1 << dev->qp_table.rdb_shift); - goto out; - } - mailbox = mthca_alloc_mailbox(dev, GFP_KERNEL); if (IS_ERR(mailbox)) { err = PTR_ERR(mailbox); @@ -891,6 +838,98 @@ int mthca_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, int attr_mask, out_mailbox: mthca_free_mailbox(dev, mailbox); +out: + return err; +} + +static const struct ib_qp_attr dummy_init_attr = { .port_num = 1 }; +static const int dummy_init_attr_mask[] = { + [IB_QPT_UD] = (IB_QP_PKEY_INDEX | + IB_QP_PORT | + IB_QP_QKEY), + [IB_QPT_UC] = (IB_QP_PKEY_INDEX | + IB_QP_PORT | + IB_QP_ACCESS_FLAGS), + [IB_QPT_RC] = (IB_QP_PKEY_INDEX | + IB_QP_PORT | + IB_QP_ACCESS_FLAGS), + [IB_QPT_SMI] = (IB_QP_PKEY_INDEX | + IB_QP_QKEY), + [IB_QPT_GSI] = (IB_QP_PKEY_INDEX | + IB_QP_QKEY), +}; + +int mthca_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, int attr_mask, + struct ib_udata *udata) +{ + struct mthca_dev *dev = to_mdev(ibqp->device); + struct mthca_qp *qp = to_mqp(ibqp); + enum ib_qp_state cur_state, new_state; + int err = -EINVAL; + + mutex_lock(&qp->mutex); + if (attr_mask & IB_QP_CUR_STATE) { + cur_state = attr->cur_qp_state; + } else { + spin_lock_irq(&qp->sq.lock); + spin_lock(&qp->rq.lock); + cur_state = qp->state; + spin_unlock(&qp->rq.lock); + spin_unlock_irq(&qp->sq.lock); + } + + new_state = attr_mask & IB_QP_STATE ? attr->qp_state : cur_state; + + if (!ib_modify_qp_is_ok(cur_state, new_state, ibqp->qp_type, attr_mask)) { + mthca_dbg(dev, "Bad QP transition (transport %d) " + "%d->%d with attr 0x%08x\n", + qp->transport, cur_state, new_state, + attr_mask); + goto out; + } + + if ((attr_mask & IB_QP_PKEY_INDEX) && + attr->pkey_index >= dev->limits.pkey_table_len) { + mthca_dbg(dev, "P_Key index (%u) too large. max is %d\n", + attr->pkey_index, dev->limits.pkey_table_len-1); + goto out; + } + + if ((attr_mask & IB_QP_PORT) && + (attr->port_num == 0 || attr->port_num > dev->limits.num_ports)) { + mthca_dbg(dev, "Port number (%u) is invalid\n", attr->port_num); + goto out; + } + + if (attr_mask & IB_QP_MAX_QP_RD_ATOMIC && + attr->max_rd_atomic > dev->limits.max_qp_init_rdma) { + mthca_dbg(dev, "Max rdma_atomic as initiator %u too large (max is %d)\n", + attr->max_rd_atomic, dev->limits.max_qp_init_rdma); + goto out; + } + + if (attr_mask & IB_QP_MAX_DEST_RD_ATOMIC && + attr->max_dest_rd_atomic > 1 << dev->qp_table.rdb_shift) { + mthca_dbg(dev, "Max rdma_atomic as responder %u too large (max %d)\n", + attr->max_dest_rd_atomic, 1 << dev->qp_table.rdb_shift); + goto out; + } + + if (cur_state == new_state && cur_state == IB_QPS_RESET) { + err = 0; + goto out; + } + + if (cur_state == IB_QPS_RESET && new_state == IB_QPS_ERR) { + err = __mthca_modify_qp(ibqp, &dummy_init_attr, + dummy_init_attr_mask[ibqp->qp_type], + IB_QPS_RESET, IB_QPS_INIT); + if (err) + goto out; + cur_state = IB_QPS_INIT; + } + + err = __mthca_modify_qp(ibqp, attr, attr_mask, cur_state, new_state); out: mutex_unlock(&qp->mutex); @@ -2245,10 +2284,10 @@ void mthca_free_err_wqe(struct mthca_dev *dev, struct mthca_qp *qp, int is_send, struct mthca_next_seg *next; /* - * For SRQs, all WQEs generate a CQE, so we're always at the - * end of the doorbell chain. + * For SRQs, all receive WQEs generate a CQE, so we're always + * at the end of the doorbell chain. */ - if (qp->ibqp.srq) { + if (qp->ibqp.srq && !is_send) { *new_wqe = 0; return; } diff --git a/drivers/infiniband/hw/mthca/mthca_srq.c b/drivers/infiniband/hw/mthca/mthca_srq.c index 61974b0296ca13..b8f05a52667376 100644 --- a/drivers/infiniband/hw/mthca/mthca_srq.c +++ b/drivers/infiniband/hw/mthca/mthca_srq.c @@ -34,6 +34,7 @@ #include <linux/slab.h> #include <linux/string.h> +#include <linux/sched.h> #include <asm/io.h> diff --git a/drivers/infiniband/ulp/ipoib/ipoib.h b/drivers/infiniband/ulp/ipoib/ipoib.h index 87310eeb6df07e..285c143115ccda 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib.h +++ b/drivers/infiniband/ulp/ipoib/ipoib.h @@ -132,12 +132,46 @@ struct ipoib_cm_data { __be32 mtu; }; +/* + * Quoting 10.3.1 Queue Pair and EE Context States: + * + * Note, for QPs that are associated with an SRQ, the Consumer should take the + * QP through the Error State before invoking a Destroy QP or a Modify QP to the + * Reset State. The Consumer may invoke the Destroy QP without first performing + * a Modify QP to the Error State and waiting for the Affiliated Asynchronous + * Last WQE Reached Event. However, if the Consumer does not wait for the + * Affiliated Asynchronous Last WQE Reached Event, then WQE and Data Segment + * leakage may occur. Therefore, it is good programming practice to tear down a + * QP that is associated with an SRQ by using the following process: + * + * - Put the QP in the Error State + * - Wait for the Affiliated Asynchronous Last WQE Reached Event; + * - either: + * drain the CQ by invoking the Poll CQ verb and either wait for CQ + * to be empty or the number of Poll CQ operations has exceeded + * CQ capacity size; + * - or + * post another WR that completes on the same CQ and wait for this + * WR to return as a WC; + * - and then invoke a Destroy QP or Reset QP. + * + * We use the second option and wait for a completion on the + * same CQ before destroying QPs attached to our SRQ. + */ + +enum ipoib_cm_state { + IPOIB_CM_RX_LIVE, + IPOIB_CM_RX_ERROR, /* Ignored by stale task */ + IPOIB_CM_RX_FLUSH /* Last WQE Reached event observed */ +}; + struct ipoib_cm_rx { struct ib_cm_id *id; struct ib_qp *qp; struct list_head list; struct net_device *dev; unsigned long jiffies; + enum ipoib_cm_state state; }; struct ipoib_cm_tx { @@ -165,10 +199,15 @@ struct ipoib_cm_dev_priv { struct ib_srq *srq; struct ipoib_cm_rx_buf *srq_ring; struct ib_cm_id *id; - struct list_head passive_ids; + struct list_head passive_ids; /* state: LIVE */ + struct list_head rx_error_list; /* state: ERROR */ + struct list_head rx_flush_list; /* state: FLUSH, drain not started */ + struct list_head rx_drain_list; /* state: FLUSH, drain started */ + struct list_head rx_reap_list; /* state: FLUSH, drain done */ struct work_struct start_task; struct work_struct reap_task; struct work_struct skb_task; + struct work_struct rx_reap_task; struct delayed_work stale_task; struct sk_buff_head skb_queue; struct list_head start_list; @@ -201,15 +240,17 @@ struct ipoib_dev_priv { struct list_head multicast_list; struct rb_root multicast_tree; - struct delayed_work pkey_task; + struct delayed_work pkey_poll_task; struct delayed_work mcast_task; struct work_struct flush_task; struct work_struct restart_task; struct delayed_work ah_reap_task; + struct work_struct pkey_event_task; struct ib_device *ca; u8 port; u16 pkey; + u16 pkey_index; struct ib_pd *pd; struct ib_mr *mr; struct ib_cq *cq; @@ -333,12 +374,13 @@ struct ipoib_dev_priv *ipoib_intf_alloc(const char *format); int ipoib_ib_dev_init(struct net_device *dev, struct ib_device *ca, int port); void ipoib_ib_dev_flush(struct work_struct *work); +void ipoib_pkey_event(struct work_struct *work); void ipoib_ib_dev_cleanup(struct net_device *dev); int ipoib_ib_dev_open(struct net_device *dev); int ipoib_ib_dev_up(struct net_device *dev); int ipoib_ib_dev_down(struct net_device *dev, int flush); -int ipoib_ib_dev_stop(struct net_device *dev); +int ipoib_ib_dev_stop(struct net_device *dev, int flush); int ipoib_dev_init(struct net_device *dev, struct ib_device *ca, int port); void ipoib_dev_cleanup(struct net_device *dev); @@ -386,6 +428,7 @@ int ipoib_vlan_delete(struct net_device *pdev, unsigned short pkey); void ipoib_pkey_poll(struct work_struct *work); int ipoib_pkey_dev_delay_open(struct net_device *dev); +void ipoib_drain_cq(struct net_device *dev); #ifdef CONFIG_INFINIBAND_IPOIB_CM diff --git a/drivers/infiniband/ulp/ipoib/ipoib_cm.c b/drivers/infiniband/ulp/ipoib/ipoib_cm.c index eec833b81e9bf0..076a0bbb63d7a2 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c @@ -37,6 +37,7 @@ #include <net/dst.h> #include <net/icmp.h> #include <linux/icmpv6.h> +#include <linux/delay.h> #ifdef CONFIG_INFINIBAND_IPOIB_DEBUG_DATA static int data_debug_level; @@ -62,6 +63,17 @@ struct ipoib_cm_id { u32 remote_mtu; }; +static struct ib_qp_attr ipoib_cm_err_attr = { + .qp_state = IB_QPS_ERR +}; + +#define IPOIB_CM_RX_DRAIN_WRID 0x7fffffff + +static struct ib_send_wr ipoib_cm_rx_drain_wr = { + .wr_id = IPOIB_CM_RX_DRAIN_WRID, + .opcode = IB_WR_SEND, +}; + static int ipoib_cm_tx_handler(struct ib_cm_id *cm_id, struct ib_cm_event *event); @@ -150,15 +162,54 @@ partial_error: return NULL; } +static void ipoib_cm_start_rx_drain(struct ipoib_dev_priv* priv) +{ + struct ib_send_wr *bad_wr; + struct ipoib_cm_rx *p; + + /* We only reserved 1 extra slot in CQ for drain WRs, so + * make sure we have at most 1 outstanding WR. */ + if (list_empty(&priv->cm.rx_flush_list) || + !list_empty(&priv->cm.rx_drain_list)) + return; + + /* + * QPs on flush list are error state. This way, a "flush + * error" WC will be immediately generated for each WR we post. + */ + p = list_entry(priv->cm.rx_flush_list.next, typeof(*p), list); + if (ib_post_send(p->qp, &ipoib_cm_rx_drain_wr, &bad_wr)) + ipoib_warn(priv, "failed to post drain wr\n"); + + list_splice_init(&priv->cm.rx_flush_list, &priv->cm.rx_drain_list); +} + +static void ipoib_cm_rx_event_handler(struct ib_event *event, void *ctx) +{ + struct ipoib_cm_rx *p = ctx; + struct ipoib_dev_priv *priv = netdev_priv(p->dev); + unsigned long flags; + + if (event->event != IB_EVENT_QP_LAST_WQE_REACHED) + return; + + spin_lock_irqsave(&priv->lock, flags); + list_move(&p->list, &priv->cm.rx_flush_list); + p->state = IPOIB_CM_RX_FLUSH; + ipoib_cm_start_rx_drain(priv); + spin_unlock_irqrestore(&priv->lock, flags); +} + static struct ib_qp *ipoib_cm_create_rx_qp(struct net_device *dev, struct ipoib_cm_rx *p) { struct ipoib_dev_priv *priv = netdev_priv(dev); struct ib_qp_init_attr attr = { - .send_cq = priv->cq, /* does not matter, we never send anything */ + .event_handler = ipoib_cm_rx_event_handler, + .send_cq = priv->cq, /* For drain WR */ .recv_cq = priv->cq, .srq = priv->cm.srq, - .cap.max_send_wr = 1, /* FIXME: 0 Seems not to work */ + .cap.max_send_wr = 1, /* For drain WR */ .cap.max_send_sge = 1, /* FIXME: 0 Seems not to work */ .sq_sig_type = IB_SIGNAL_ALL_WR, .qp_type = IB_QPT_RC, @@ -198,6 +249,27 @@ static int ipoib_cm_modify_rx_qp(struct net_device *dev, ipoib_warn(priv, "failed to modify QP to RTR: %d\n", ret); return ret; } + + /* + * Current Mellanox HCA firmware won't generate completions + * with error for drain WRs unless the QP has been moved to + * RTS first. This work-around leaves a window where a QP has + * moved to error asynchronously, but this will eventually get + * fixed in firmware, so let's not error out if modify QP + * fails. + */ + qp_attr.qp_state = IB_QPS_RTS; + ret = ib_cm_init_qp_attr(cm_id, &qp_attr, &qp_attr_mask); + if (ret) { + ipoib_warn(priv, "failed to init QP attr for RTS: %d\n", ret); + return 0; + } + ret = ib_modify_qp(qp, &qp_attr, qp_attr_mask); + if (ret) { + ipoib_warn(priv, "failed to modify QP to RTS: %d\n", ret); + return 0; + } + return 0; } @@ -256,6 +328,7 @@ static int ipoib_cm_req_handler(struct ib_cm_id *cm_id, struct ib_cm_event *even cm_id->context = p; p->jiffies = jiffies; + p->state = IPOIB_CM_RX_LIVE; spin_lock_irq(&priv->lock); if (list_empty(&priv->cm.passive_ids)) queue_delayed_work(ipoib_workqueue, @@ -277,7 +350,6 @@ static int ipoib_cm_rx_handler(struct ib_cm_id *cm_id, { struct ipoib_cm_rx *p; struct ipoib_dev_priv *priv; - int ret; switch (event->event) { case IB_CM_REQ_RECEIVED: @@ -289,20 +361,9 @@ static int ipoib_cm_rx_handler(struct ib_cm_id *cm_id, case IB_CM_REJ_RECEIVED: p = cm_id->context; priv = netdev_priv(p->dev); - spin_lock_irq(&priv->lock); - if (list_empty(&p->list)) - ret = 0; /* Connection is going away already. */ - else { - list_del_init(&p->list); - ret = -ECONNRESET; - } - spin_unlock_irq(&priv->lock); - if (ret) { - ib_destroy_qp(p->qp); - kfree(p); - return ret; - } - return 0; + if (ib_modify_qp(p->qp, &ipoib_cm_err_attr, IB_QP_STATE)) + ipoib_warn(priv, "unable to move qp to error state\n"); + /* Fall through */ default: return 0; } @@ -354,8 +415,15 @@ void ipoib_cm_handle_rx_wc(struct net_device *dev, struct ib_wc *wc) wr_id, wc->status); if (unlikely(wr_id >= ipoib_recvq_size)) { - ipoib_warn(priv, "cm recv completion event with wrid %d (> %d)\n", - wr_id, ipoib_recvq_size); + if (wr_id == (IPOIB_CM_RX_DRAIN_WRID & ~IPOIB_CM_OP_SRQ)) { + spin_lock_irqsave(&priv->lock, flags); + list_splice_init(&priv->cm.rx_drain_list, &priv->cm.rx_reap_list); + ipoib_cm_start_rx_drain(priv); + queue_work(ipoib_workqueue, &priv->cm.rx_reap_task); + spin_unlock_irqrestore(&priv->lock, flags); + } else + ipoib_warn(priv, "cm recv completion event with wrid %d (> %d)\n", + wr_id, ipoib_recvq_size); return; } @@ -374,9 +442,9 @@ void ipoib_cm_handle_rx_wc(struct net_device *dev, struct ib_wc *wc) if (p && time_after_eq(jiffies, p->jiffies + IPOIB_CM_RX_UPDATE_TIME)) { spin_lock_irqsave(&priv->lock, flags); p->jiffies = jiffies; - /* Move this entry to list head, but do - * not re-add it if it has been removed. */ - if (!list_empty(&p->list)) + /* Move this entry to list head, but do not re-add it + * if it has been moved out of list. */ + if (p->state == IPOIB_CM_RX_LIVE) list_move(&p->list, &priv->cm.passive_ids); spin_unlock_irqrestore(&priv->lock, flags); } @@ -592,8 +660,7 @@ int ipoib_cm_dev_open(struct net_device *dev) if (IS_ERR(priv->cm.id)) { printk(KERN_WARNING "%s: failed to create CM ID\n", priv->ca->name); ret = PTR_ERR(priv->cm.id); - priv->cm.id = NULL; - return ret; + goto err_cm; } ret = ib_cm_listen(priv->cm.id, cpu_to_be64(IPOIB_CM_IETF_ID | priv->qp->qp_num), @@ -601,34 +668,76 @@ int ipoib_cm_dev_open(struct net_device *dev) if (ret) { printk(KERN_WARNING "%s: failed to listen on ID 0x%llx\n", priv->ca->name, IPOIB_CM_IETF_ID | priv->qp->qp_num); - ib_destroy_cm_id(priv->cm.id); - priv->cm.id = NULL; - return ret; + goto err_listen; } + return 0; + +err_listen: + ib_destroy_cm_id(priv->cm.id); +err_cm: + priv->cm.id = NULL; + return ret; } void ipoib_cm_dev_stop(struct net_device *dev) { struct ipoib_dev_priv *priv = netdev_priv(dev); - struct ipoib_cm_rx *p; + struct ipoib_cm_rx *p, *n; + unsigned long begin; + LIST_HEAD(list); + int ret; if (!IPOIB_CM_SUPPORTED(dev->dev_addr) || !priv->cm.id) return; ib_destroy_cm_id(priv->cm.id); priv->cm.id = NULL; + spin_lock_irq(&priv->lock); while (!list_empty(&priv->cm.passive_ids)) { p = list_entry(priv->cm.passive_ids.next, typeof(*p), list); - list_del_init(&p->list); + list_move(&p->list, &priv->cm.rx_error_list); + p->state = IPOIB_CM_RX_ERROR; + spin_unlock_irq(&priv->lock); + ret = ib_modify_qp(p->qp, &ipoib_cm_err_attr, IB_QP_STATE); + if (ret) + ipoib_warn(priv, "unable to move qp to error state: %d\n", ret); + spin_lock_irq(&priv->lock); + } + + /* Wait for all RX to be drained */ + begin = jiffies; + + while (!list_empty(&priv->cm.rx_error_list) || + !list_empty(&priv->cm.rx_flush_list) || + !list_empty(&priv->cm.rx_drain_list)) { + if (time_after(jiffies, begin + 5 * HZ)) { + ipoib_warn(priv, "RX drain timing out\n"); + + /* + * assume the HW is wedged and just free up everything. + */ + list_splice_init(&priv->cm.rx_flush_list, &list); + list_splice_init(&priv->cm.rx_error_list, &list); + list_splice_init(&priv->cm.rx_drain_list, &list); + break; + } spin_unlock_irq(&priv->lock); + msleep(1); + ipoib_drain_cq(dev); + spin_lock_irq(&priv->lock); + } + + list_splice_init(&priv->cm.rx_reap_list, &list); + + spin_unlock_irq(&priv->lock); + + list_for_each_entry_safe(p, n, &list, list) { ib_destroy_cm_id(p->id); ib_destroy_qp(p->qp); kfree(p); - spin_lock_irq(&priv->lock); } - spin_unlock_irq(&priv->lock); cancel_delayed_work(&priv->cm.stale_task); } @@ -1079,24 +1188,44 @@ void ipoib_cm_skb_too_long(struct net_device* dev, struct sk_buff *skb, queue_work(ipoib_workqueue, &priv->cm.skb_task); } +static void ipoib_cm_rx_reap(struct work_struct *work) +{ + struct ipoib_dev_priv *priv = container_of(work, struct ipoib_dev_priv, + cm.rx_reap_task); + struct ipoib_cm_rx *p, *n; + LIST_HEAD(list); + + spin_lock_irq(&priv->lock); + list_splice_init(&priv->cm.rx_reap_list, &list); + spin_unlock_irq(&priv->lock); + + list_for_each_entry_safe(p, n, &list, list) { + ib_destroy_cm_id(p->id); + ib_destroy_qp(p->qp); + kfree(p); + } +} + static void ipoib_cm_stale_task(struct work_struct *work) { struct ipoib_dev_priv *priv = container_of(work, struct ipoib_dev_priv, cm.stale_task.work); struct ipoib_cm_rx *p; + int ret; spin_lock_irq(&priv->lock); while (!list_empty(&priv->cm.passive_ids)) { - /* List if sorted by LRU, start from tail, + /* List is sorted by LRU, start from tail, * stop when we see a recently used entry */ p = list_entry(priv->cm.passive_ids.prev, typeof(*p), list); if (time_before_eq(jiffies, p->jiffies + IPOIB_CM_RX_TIMEOUT)) break; - list_del_init(&p->list); + list_move(&p->list, &priv->cm.rx_error_list); + p->state = IPOIB_CM_RX_ERROR; spin_unlock_irq(&priv->lock); - ib_destroy_cm_id(p->id); - ib_destroy_qp(p->qp); - kfree(p); + ret = ib_modify_qp(p->qp, &ipoib_cm_err_attr, IB_QP_STATE); + if (ret) + ipoib_warn(priv, "unable to move qp to error state: %d\n", ret); spin_lock_irq(&priv->lock); } @@ -1164,9 +1293,14 @@ int ipoib_cm_dev_init(struct net_device *dev) INIT_LIST_HEAD(&priv->cm.passive_ids); INIT_LIST_HEAD(&priv->cm.reap_list); INIT_LIST_HEAD(&priv->cm.start_list); + INIT_LIST_HEAD(&priv->cm.rx_error_list); + INIT_LIST_HEAD(&priv->cm.rx_flush_list); + INIT_LIST_HEAD(&priv->cm.rx_drain_list); + INIT_LIST_HEAD(&priv->cm.rx_reap_list); INIT_WORK(&priv->cm.start_task, ipoib_cm_tx_start); INIT_WORK(&priv->cm.reap_task, ipoib_cm_tx_reap); INIT_WORK(&priv->cm.skb_task, ipoib_cm_skb_reap); + INIT_WORK(&priv->cm.rx_reap_task, ipoib_cm_rx_reap); INIT_DELAYED_WORK(&priv->cm.stale_task, ipoib_cm_stale_task); skb_queue_head_init(&priv->cm.skb_queue); diff --git a/drivers/infiniband/ulp/ipoib/ipoib_ib.c b/drivers/infiniband/ulp/ipoib/ipoib_ib.c index 68d72c6f7ffbf4..8404f05b2b6eef 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_ib.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_ib.c @@ -448,6 +448,13 @@ int ipoib_ib_dev_open(struct net_device *dev) struct ipoib_dev_priv *priv = netdev_priv(dev); int ret; + if (ib_find_pkey(priv->ca, priv->port, priv->pkey, &priv->pkey_index)) { + ipoib_warn(priv, "P_Key 0x%04x not found\n", priv->pkey); + clear_bit(IPOIB_PKEY_ASSIGNED, &priv->flags); + return -1; + } + set_bit(IPOIB_PKEY_ASSIGNED, &priv->flags); + ret = ipoib_init_qp(dev); if (ret) { ipoib_warn(priv, "ipoib_init_qp returned %d\n", ret); @@ -457,14 +464,14 @@ int ipoib_ib_dev_open(struct net_device *dev) ret = ipoib_ib_post_receives(dev); if (ret) { ipoib_warn(priv, "ipoib_ib_post_receives returned %d\n", ret); - ipoib_ib_dev_stop(dev); + ipoib_ib_dev_stop(dev, 1); return -1; } ret = ipoib_cm_dev_open(dev); if (ret) { - ipoib_warn(priv, "ipoib_ib_post_receives returned %d\n", ret); - ipoib_ib_dev_stop(dev); + ipoib_warn(priv, "ipoib_cm_dev_open returned %d\n", ret); + ipoib_ib_dev_stop(dev, 1); return -1; } @@ -516,7 +523,7 @@ int ipoib_ib_dev_down(struct net_device *dev, int flush) if (!test_bit(IPOIB_PKEY_ASSIGNED, &priv->flags)) { mutex_lock(&pkey_mutex); set_bit(IPOIB_PKEY_STOP, &priv->flags); - cancel_delayed_work(&priv->pkey_task); + cancel_delayed_work(&priv->pkey_poll_task); mutex_unlock(&pkey_mutex); if (flush) flush_workqueue(ipoib_workqueue); @@ -543,13 +550,30 @@ static int recvs_pending(struct net_device *dev) return pending; } -int ipoib_ib_dev_stop(struct net_device *dev) +void ipoib_drain_cq(struct net_device *dev) +{ + struct ipoib_dev_priv *priv = netdev_priv(dev); + int i, n; + do { + n = ib_poll_cq(priv->cq, IPOIB_NUM_WC, priv->ibwc); + for (i = 0; i < n; ++i) { + if (priv->ibwc[i].wr_id & IPOIB_CM_OP_SRQ) + ipoib_cm_handle_rx_wc(dev, priv->ibwc + i); + else if (priv->ibwc[i].wr_id & IPOIB_OP_RECV) + ipoib_ib_handle_rx_wc(dev, priv->ibwc + i); + else + ipoib_ib_handle_tx_wc(dev, priv->ibwc + i); + } + } while (n == IPOIB_NUM_WC); +} + +int ipoib_ib_dev_stop(struct net_device *dev, int flush) { struct ipoib_dev_priv *priv = netdev_priv(dev); struct ib_qp_attr qp_attr; unsigned long begin; struct ipoib_tx_buf *tx_req; - int i, n; + int i; clear_bit(IPOIB_FLAG_INITIALIZED, &priv->flags); netif_poll_disable(dev); @@ -604,17 +628,7 @@ int ipoib_ib_dev_stop(struct net_device *dev) goto timeout; } - do { - n = ib_poll_cq(priv->cq, IPOIB_NUM_WC, priv->ibwc); - for (i = 0; i < n; ++i) { - if (priv->ibwc[i].wr_id & IPOIB_CM_OP_SRQ) - ipoib_cm_handle_rx_wc(dev, priv->ibwc + i); - else if (priv->ibwc[i].wr_id & IPOIB_OP_RECV) - ipoib_ib_handle_rx_wc(dev, priv->ibwc + i); - else - ipoib_ib_handle_tx_wc(dev, priv->ibwc + i); - } - } while (n == IPOIB_NUM_WC); + ipoib_drain_cq(dev); msleep(1); } @@ -629,7 +643,8 @@ timeout: /* Wait for all AHs to be reaped */ set_bit(IPOIB_STOP_REAPER, &priv->flags); cancel_delayed_work(&priv->ah_reap_task); - flush_workqueue(ipoib_workqueue); + if (flush) + flush_workqueue(ipoib_workqueue); begin = jiffies; @@ -673,13 +688,24 @@ int ipoib_ib_dev_init(struct net_device *dev, struct ib_device *ca, int port) return 0; } -void ipoib_ib_dev_flush(struct work_struct *work) +static void __ipoib_ib_dev_flush(struct ipoib_dev_priv *priv, int pkey_event) { - struct ipoib_dev_priv *cpriv, *priv = - container_of(work, struct ipoib_dev_priv, flush_task); + struct ipoib_dev_priv *cpriv; struct net_device *dev = priv->dev; + u16 new_index; + + mutex_lock(&priv->vlan_mutex); + + /* + * Flush any child interfaces too -- they might be up even if + * the parent is down. + */ + list_for_each_entry(cpriv, &priv->child_intfs, list) + __ipoib_ib_dev_flush(cpriv, pkey_event); - if (!test_bit(IPOIB_FLAG_INITIALIZED, &priv->flags) ) { + mutex_unlock(&priv->vlan_mutex); + + if (!test_bit(IPOIB_FLAG_INITIALIZED, &priv->flags)) { ipoib_dbg(priv, "Not flushing - IPOIB_FLAG_INITIALIZED not set.\n"); return; } @@ -689,10 +715,32 @@ void ipoib_ib_dev_flush(struct work_struct *work) return; } + if (pkey_event) { + if (ib_find_pkey(priv->ca, priv->port, priv->pkey, &new_index)) { + clear_bit(IPOIB_PKEY_ASSIGNED, &priv->flags); + ipoib_ib_dev_down(dev, 0); + ipoib_pkey_dev_delay_open(dev); + return; + } + set_bit(IPOIB_PKEY_ASSIGNED, &priv->flags); + + /* restart QP only if P_Key index is changed */ + if (new_index == priv->pkey_index) { + ipoib_dbg(priv, "Not flushing - P_Key index not changed.\n"); + return; + } + priv->pkey_index = new_index; + } + ipoib_dbg(priv, "flushing\n"); ipoib_ib_dev_down(dev, 0); + if (pkey_event) { + ipoib_ib_dev_stop(dev, 0); + ipoib_ib_dev_open(dev); + } + /* * The device could have been brought down between the start and when * we get here, don't bring it back up if it's not configured up @@ -701,14 +749,24 @@ void ipoib_ib_dev_flush(struct work_struct *work) ipoib_ib_dev_up(dev); ipoib_mcast_restart_task(&priv->restart_task); } +} - mutex_lock(&priv->vlan_mutex); +void ipoib_ib_dev_flush(struct work_struct *work) +{ + struct ipoib_dev_priv *priv = + container_of(work, struct ipoib_dev_priv, flush_task); - /* Flush any child interfaces too */ - list_for_each_entry(cpriv, &priv->child_intfs, list) - ipoib_ib_dev_flush(&cpriv->flush_task); + ipoib_dbg(priv, "Flushing %s\n", priv->dev->name); + __ipoib_ib_dev_flush(priv, 0); +} - mutex_unlock(&priv->vlan_mutex); +void ipoib_pkey_event(struct work_struct *work) +{ + struct ipoib_dev_priv *priv = + container_of(work, struct ipoib_dev_priv, pkey_event_task); + + ipoib_dbg(priv, "Flushing %s and restarting its QP\n", priv->dev->name); + __ipoib_ib_dev_flush(priv, 1); } void ipoib_ib_dev_cleanup(struct net_device *dev) @@ -736,7 +794,7 @@ void ipoib_ib_dev_cleanup(struct net_device *dev) void ipoib_pkey_poll(struct work_struct *work) { struct ipoib_dev_priv *priv = - container_of(work, struct ipoib_dev_priv, pkey_task.work); + container_of(work, struct ipoib_dev_priv, pkey_poll_task.work); struct net_device *dev = priv->dev; ipoib_pkey_dev_check_presence(dev); @@ -747,7 +805,7 @@ void ipoib_pkey_poll(struct work_struct *work) mutex_lock(&pkey_mutex); if (!test_bit(IPOIB_PKEY_STOP, &priv->flags)) queue_delayed_work(ipoib_workqueue, - &priv->pkey_task, + &priv->pkey_poll_task, HZ); mutex_unlock(&pkey_mutex); } @@ -766,7 +824,7 @@ int ipoib_pkey_dev_delay_open(struct net_device *dev) mutex_lock(&pkey_mutex); clear_bit(IPOIB_PKEY_STOP, &priv->flags); queue_delayed_work(ipoib_workqueue, - &priv->pkey_task, + &priv->pkey_poll_task, HZ); mutex_unlock(&pkey_mutex); return 1; diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index 0a428f2b05c773..894b1dcdf3eb31 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -107,7 +107,7 @@ int ipoib_open(struct net_device *dev) return -EINVAL; if (ipoib_ib_dev_up(dev)) { - ipoib_ib_dev_stop(dev); + ipoib_ib_dev_stop(dev, 1); return -EINVAL; } @@ -152,7 +152,7 @@ static int ipoib_stop(struct net_device *dev) flush_workqueue(ipoib_workqueue); ipoib_ib_dev_down(dev, 1); - ipoib_ib_dev_stop(dev); + ipoib_ib_dev_stop(dev, 1); if (!test_bit(IPOIB_FLAG_SUBINTERFACE, &priv->flags)) { struct ipoib_dev_priv *cpriv; @@ -988,7 +988,8 @@ static void ipoib_setup(struct net_device *dev) INIT_LIST_HEAD(&priv->dead_ahs); INIT_LIST_HEAD(&priv->multicast_list); - INIT_DELAYED_WORK(&priv->pkey_task, ipoib_pkey_poll); + INIT_DELAYED_WORK(&priv->pkey_poll_task, ipoib_pkey_poll); + INIT_WORK(&priv->pkey_event_task, ipoib_pkey_event); INIT_DELAYED_WORK(&priv->mcast_task, ipoib_mcast_join_task); INIT_WORK(&priv->flush_task, ipoib_ib_dev_flush); INIT_WORK(&priv->restart_task, ipoib_mcast_restart_task); diff --git a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c index 54fbead4de01f1..aae367057a569d 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c @@ -524,7 +524,7 @@ void ipoib_mcast_join_task(struct work_struct *work) return; if (ib_query_gid(priv->ca, priv->port, 0, &priv->local_gid)) - ipoib_warn(priv, "ib_gid_entry_get() failed\n"); + ipoib_warn(priv, "ib_query_gid() failed\n"); else memcpy(priv->dev->dev_addr + 4, priv->local_gid.raw, sizeof (union ib_gid)); diff --git a/drivers/infiniband/ulp/ipoib/ipoib_verbs.c b/drivers/infiniband/ulp/ipoib/ipoib_verbs.c index 5c3c6a43a52b55..982eb88e27ec0f 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_verbs.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_verbs.c @@ -33,8 +33,6 @@ * $Id: ipoib_verbs.c 1349 2004-12-16 21:09:43Z roland $ */ -#include <rdma/ib_cache.h> - #include "ipoib.h" int ipoib_mcast_attach(struct net_device *dev, u16 mlid, union ib_gid *mgid) @@ -49,7 +47,7 @@ int ipoib_mcast_attach(struct net_device *dev, u16 mlid, union ib_gid *mgid) if (!qp_attr) goto out; - if (ib_find_cached_pkey(priv->ca, priv->port, priv->pkey, &pkey_index)) { + if (ib_find_pkey(priv->ca, priv->port, priv->pkey, &pkey_index)) { clear_bit(IPOIB_PKEY_ASSIGNED, &priv->flags); ret = -ENXIO; goto out; @@ -94,26 +92,16 @@ int ipoib_init_qp(struct net_device *dev) { struct ipoib_dev_priv *priv = netdev_priv(dev); int ret; - u16 pkey_index; struct ib_qp_attr qp_attr; int attr_mask; - /* - * Search through the port P_Key table for the requested pkey value. - * The port has to be assigned to the respective IB partition in - * advance. - */ - ret = ib_find_cached_pkey(priv->ca, priv->port, priv->pkey, &pkey_index); - if (ret) { - clear_bit(IPOIB_PKEY_ASSIGNED, &priv->flags); - return ret; - } - set_bit(IPOIB_PKEY_ASSIGNED, &priv->flags); + if (!test_bit(IPOIB_PKEY_ASSIGNED, &priv->flags)) + return -1; qp_attr.qp_state = IB_QPS_INIT; qp_attr.qkey = 0; qp_attr.port_num = priv->port; - qp_attr.pkey_index = pkey_index; + qp_attr.pkey_index = priv->pkey_index; attr_mask = IB_QP_QKEY | IB_QP_PORT | @@ -185,7 +173,7 @@ int ipoib_transport_dev_init(struct net_device *dev, struct ib_device *ca) size = ipoib_sendq_size + ipoib_recvq_size + 1; ret = ipoib_cm_dev_init(dev); if (!ret) - size += ipoib_recvq_size; + size += ipoib_recvq_size + 1 /* 1 extra for rx_drain_qp */; priv->cq = ib_create_cq(priv->ca, ipoib_ib_completion, NULL, dev, size, 0); if (IS_ERR(priv->cq)) { @@ -259,14 +247,18 @@ void ipoib_event(struct ib_event_handler *handler, struct ipoib_dev_priv *priv = container_of(handler, struct ipoib_dev_priv, event_handler); - if ((record->event == IB_EVENT_PORT_ERR || - record->event == IB_EVENT_PKEY_CHANGE || - record->event == IB_EVENT_PORT_ACTIVE || - record->event == IB_EVENT_LID_CHANGE || - record->event == IB_EVENT_SM_CHANGE || - record->event == IB_EVENT_CLIENT_REREGISTER) && - record->element.port_num == priv->port) { + if (record->element.port_num != priv->port) + return; + + if (record->event == IB_EVENT_PORT_ERR || + record->event == IB_EVENT_PORT_ACTIVE || + record->event == IB_EVENT_LID_CHANGE || + record->event == IB_EVENT_SM_CHANGE || + record->event == IB_EVENT_CLIENT_REREGISTER) { ipoib_dbg(priv, "Port state change event\n"); queue_work(ipoib_workqueue, &priv->flush_task); + } else if (record->event == IB_EVENT_PKEY_CHANGE) { + ipoib_dbg(priv, "P_Key change event on port:%d\n", priv->port); + queue_work(ipoib_workqueue, &priv->pkey_event_task); } } diff --git a/drivers/input/joystick/iforce/iforce-main.c b/drivers/input/joystick/iforce/iforce-main.c index fb129c479a6661..682244b1c04226 100644 --- a/drivers/input/joystick/iforce/iforce-main.c +++ b/drivers/input/joystick/iforce/iforce-main.c @@ -370,10 +370,8 @@ int iforce_init_device(struct iforce *iforce) /* * Disable spring, enable force feedback. - * FIXME: We should use iforce_set_autocenter() et al here. */ - - iforce_send_packet(iforce, FF_CMD_AUTOCENTER, "\004\000"); + iforce_set_autocenter(input_dev, 0); /* * Find appropriate device entry diff --git a/drivers/input/joystick/iforce/iforce-packets.c b/drivers/input/joystick/iforce/iforce-packets.c index 21c4e13d3a508c..3154ccd7400098 100644 --- a/drivers/input/joystick/iforce/iforce-packets.c +++ b/drivers/input/joystick/iforce/iforce-packets.c @@ -246,6 +246,8 @@ void iforce_process_packet(struct iforce *iforce, u16 cmd, unsigned char *data) int iforce_get_id_packet(struct iforce *iforce, char *packet) { + int status; + switch (iforce->bus) { case IFORCE_USB: @@ -254,18 +256,22 @@ int iforce_get_id_packet(struct iforce *iforce, char *packet) iforce->cr.bRequest = packet[0]; iforce->ctrl->dev = iforce->usbdev; - if (usb_submit_urb(iforce->ctrl, GFP_ATOMIC)) + status = usb_submit_urb(iforce->ctrl, GFP_ATOMIC); + if (status) { + err("usb_submit_urb failed %d", status); return -1; + } wait_event_interruptible_timeout(iforce->wait, iforce->ctrl->status != -EINPROGRESS, HZ); if (iforce->ctrl->status) { + dbg("iforce->ctrl->status = %d", iforce->ctrl->status); usb_unlink_urb(iforce->ctrl); return -1; } #else - err("iforce_get_id_packet: iforce->bus = USB!"); + dbg("iforce_get_id_packet: iforce->bus = USB!"); #endif break; diff --git a/drivers/input/joystick/iforce/iforce-usb.c b/drivers/input/joystick/iforce/iforce-usb.c index 750099d8e3c62d..1457b73850e7dd 100644 --- a/drivers/input/joystick/iforce/iforce-usb.c +++ b/drivers/input/joystick/iforce/iforce-usb.c @@ -65,6 +65,7 @@ void iforce_usb_xmit(struct iforce *iforce) XMIT_INC(iforce->xmit.tail, n); if ( (n=usb_submit_urb(iforce->out, GFP_ATOMIC)) ) { + clear_bit(IFORCE_XMIT_RUNNING, iforce->xmit_flags); warn("usb_submit_urb failed %d\n", n); } @@ -163,8 +164,8 @@ static int iforce_usb_probe(struct usb_interface *intf, usb_fill_int_urb(iforce->irq, dev, usb_rcvintpipe(dev, epirq->bEndpointAddress), iforce->data, 16, iforce_usb_irq, iforce, epirq->bInterval); - usb_fill_bulk_urb(iforce->out, dev, usb_sndbulkpipe(dev, epout->bEndpointAddress), - iforce + 1, 32, iforce_usb_out, iforce); + usb_fill_int_urb(iforce->out, dev, usb_sndintpipe(dev, epout->bEndpointAddress), + iforce + 1, 32, iforce_usb_out, iforce, epout->bInterval); usb_fill_control_urb(iforce->ctrl, dev, usb_rcvctrlpipe(dev, 0), (void*) &iforce->cr, iforce->edata, 16, iforce_usb_ctrl, iforce); diff --git a/drivers/input/misc/input-polldev.c b/drivers/input/misc/input-polldev.c index 1b2b9c9c5d88f4..b773d4c756a613 100644 --- a/drivers/input/misc/input-polldev.c +++ b/drivers/input/misc/input-polldev.c @@ -12,6 +12,11 @@ #include <linux/mutex.h> #include <linux/input-polldev.h> +MODULE_AUTHOR("Dmitry Torokhov <dtor@mail.ru>"); +MODULE_DESCRIPTION("Generic implementation of a polled input device"); +MODULE_LICENSE("GPL v2"); +MODULE_VERSION("0.1"); + static DEFINE_MUTEX(polldev_mutex); static int polldev_users; static struct workqueue_struct *polldev_wq; diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index cf3e4664e72bc5..2c5f11a4f6b410 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -251,11 +251,15 @@ static const struct alps_model_info *alps_get_model(struct psmouse *psmouse, int dbg("E7 report: %2.2x %2.2x %2.2x", param[0], param[1], param[2]); - for (i = 0; i < ARRAY_SIZE(rates) && param[2] != rates[i]; i++); - *version = (param[0] << 8) | (param[1] << 4) | i; + if (version) { + for (i = 0; i < ARRAY_SIZE(rates) && param[2] != rates[i]; i++) + /* empty */; + *version = (param[0] << 8) | (param[1] << 4) | i; + } for (i = 0; i < ARRAY_SIZE(alps_model_data); i++) - if (!memcmp(param, alps_model_data[i].signature, sizeof(alps_model_data[i].signature))) + if (!memcmp(param, alps_model_data[i].signature, + sizeof(alps_model_data[i].signature))) return alps_model_data + i; return NULL; @@ -380,32 +384,46 @@ static int alps_poll(struct psmouse *psmouse) return 0; } -static int alps_reconnect(struct psmouse *psmouse) +static int alps_hw_init(struct psmouse *psmouse, int *version) { struct alps_data *priv = psmouse->private; - int version; - - psmouse_reset(psmouse); - if (!(priv->i = alps_get_model(psmouse, &version))) + priv->i = alps_get_model(psmouse, version); + if (!priv->i) return -1; if ((priv->i->flags & ALPS_PASS) && alps_passthrough_mode(psmouse, 1)) return -1; if (alps_tap_mode(psmouse, 1)) { - printk(KERN_WARNING "alps.c: Failed to reenable hardware tapping\n"); + printk(KERN_WARNING "alps.c: Failed to enable hardware tapping\n"); return -1; } if (alps_absolute_mode(psmouse)) { - printk(KERN_ERR "alps.c: Failed to reenable absolute mode\n"); + printk(KERN_ERR "alps.c: Failed to enable absolute mode\n"); return -1; } if ((priv->i->flags & ALPS_PASS) && alps_passthrough_mode(psmouse, 0)) return -1; + /* ALPS needs stream mode, otherwise it won't report any data */ + if (ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETSTREAM)) { + printk(KERN_ERR "alps.c: Failed to enable stream mode\n"); + return -1; + } + + return 0; +} + +static int alps_reconnect(struct psmouse *psmouse) +{ + psmouse_reset(psmouse); + + if (alps_hw_init(psmouse, NULL)) + return -1; + return 0; } @@ -430,23 +448,9 @@ int alps_init(struct psmouse *psmouse) goto init_fail; priv->dev2 = dev2; + psmouse->private = priv; - priv->i = alps_get_model(psmouse, &version); - if (!priv->i) - goto init_fail; - - if ((priv->i->flags & ALPS_PASS) && alps_passthrough_mode(psmouse, 1)) - goto init_fail; - - if (alps_tap_mode(psmouse, 1)) - printk(KERN_WARNING "alps.c: Failed to enable hardware tapping\n"); - - if (alps_absolute_mode(psmouse)) { - printk(KERN_ERR "alps.c: Failed to enable absolute mode\n"); - goto init_fail; - } - - if ((priv->i->flags & ALPS_PASS) && alps_passthrough_mode(psmouse, 0)) + if (alps_hw_init(psmouse, &version)) goto init_fail; dev1->evbit[LONG(EV_KEY)] |= BIT(EV_KEY); @@ -493,13 +497,13 @@ int alps_init(struct psmouse *psmouse) /* We are having trouble resyncing ALPS touchpads so disable it for now */ psmouse->resync_time = 0; - psmouse->private = priv; return 0; init_fail: psmouse_reset(psmouse); input_free_device(dev2); kfree(priv); + psmouse->private = NULL; return -1; } diff --git a/drivers/input/mouse/logips2pp.c b/drivers/input/mouse/logips2pp.c index 9df74b72e6c466..0c5660d28caa18 100644 --- a/drivers/input/mouse/logips2pp.c +++ b/drivers/input/mouse/logips2pp.c @@ -221,6 +221,7 @@ static const struct ps2pp_info *get_model_info(unsigned char model) { 66, PS2PP_KIND_MX, /* MX3100 reciver */ PS2PP_WHEEL | PS2PP_SIDE_BTN | PS2PP_TASK_BTN | PS2PP_EXTRA_BTN | PS2PP_NAV_BTN | PS2PP_HWHEEL }, + { 72, PS2PP_KIND_TRACKMAN, 0 }, /* T-CH11: TrackMan Marble */ { 73, 0, PS2PP_SIDE_BTN }, { 75, PS2PP_KIND_WHEEL, PS2PP_WHEEL }, { 76, PS2PP_KIND_WHEEL, PS2PP_WHEEL }, diff --git a/drivers/input/serio/sa1111ps2.c b/drivers/input/serio/sa1111ps2.c index 559508795af188..d31ece8f68e93d 100644 --- a/drivers/input/serio/sa1111ps2.c +++ b/drivers/input/serio/sa1111ps2.c @@ -170,7 +170,7 @@ static void ps2_close(struct serio *io) /* * Clear the input buffer. */ -static void __init ps2_clear_input(struct ps2if *ps2if) +static void __devinit ps2_clear_input(struct ps2if *ps2if) { int maxread = 100; @@ -228,7 +228,7 @@ static int __init ps2_test(struct ps2if *ps2if) /* * Add one device to this driver. */ -static int ps2_probe(struct sa1111_dev *dev) +static int __devinit ps2_probe(struct sa1111_dev *dev) { struct ps2if *ps2if; struct serio *serio; diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 4f091800bfebd3..e5cca9bd040632 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -12,17 +12,17 @@ menuconfig INPUT_TOUCHSCREEN if INPUT_TOUCHSCREEN config TOUCHSCREEN_ADS7846 - tristate "ADS 7846/7843 based touchscreens" + tristate "ADS7846/TSC2046 and ADS7843 based touchscreens" depends on SPI_MASTER depends on HWMON = n || HWMON help Say Y here if you have a touchscreen interface using the - ADS7846 or ADS7843 controller, and your board-specific setup - code includes that in its table of SPI devices. + ADS7846/TSC2046 or ADS7843 controller, and your board-specific + setup code includes that in its table of SPI devices. If HWMON is selected, and the driver is told the reference voltage on your board, you will also get hwmon interfaces for the voltage - (and on ads7846, temperature) sensors of this chip. + (and on ads7846/tsc2046, temperature) sensors of this chip. If unsure, say N (but it's safe to say "Y"). diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c index 693e3b2a65a35e..1c9069cd3bae42 100644 --- a/drivers/input/touchscreen/ads7846.c +++ b/drivers/input/touchscreen/ads7846.c @@ -39,6 +39,7 @@ /* * This code has been heavily tested on a Nokia 770, and lightly * tested on other ads7846 devices (OSK/Mistral, Lubbock). + * TSC2046 is just newer ads7846 silicon. * Support for ads7843 tested on Atmel at91sam926x-EK. * Support for ads7845 has only been stubbed in. * @@ -847,7 +848,7 @@ static int __devinit ads7846_probe(struct spi_device *spi) * may not. So we stick to very-portable 8 bit words, both RX and TX. */ spi->bits_per_word = 8; - spi->mode = SPI_MODE_1; + spi->mode = SPI_MODE_0; err = spi_setup(spi); if (err < 0) return err; diff --git a/drivers/input/touchscreen/hp680_ts_input.c b/drivers/input/touchscreen/hp680_ts_input.c index 61c15024c2a0e0..1a15475aedfcc2 100644 --- a/drivers/input/touchscreen/hp680_ts_input.c +++ b/drivers/input/touchscreen/hp680_ts_input.c @@ -1,7 +1,6 @@ #include <linux/input.h> #include <linux/module.h> #include <linux/init.h> - #include <linux/interrupt.h> #include <asm/io.h> #include <asm/delay.h> @@ -18,12 +17,12 @@ #define PHDR 0xa400012e #define SCPDR 0xa4000136 -static void do_softint(void *data); +static void do_softint(struct work_struct *work); static struct input_dev *hp680_ts_dev; -static DECLARE_WORK(work, do_softint); +static DECLARE_DELAYED_WORK(work, do_softint); -static void do_softint(void *data) +static void do_softint(struct work_struct *work) { int absx = 0, absy = 0; u8 scpdr; diff --git a/drivers/input/touchscreen/ucb1400_ts.c b/drivers/input/touchscreen/ucb1400_ts.c index 6582816a047788..f0cbcdb008edd4 100644 --- a/drivers/input/touchscreen/ucb1400_ts.c +++ b/drivers/input/touchscreen/ucb1400_ts.c @@ -288,9 +288,9 @@ static int ucb1400_ts_thread(void *_ucb) struct ucb1400 *ucb = _ucb; struct task_struct *tsk = current; int valid = 0; + struct sched_param param = { .sched_priority = 1 }; - tsk->policy = SCHED_FIFO; - tsk->rt_priority = 1; + sched_setscheduler(tsk, SCHED_FIFO, ¶m); while (!kthread_should_stop()) { unsigned int x, y, p; diff --git a/drivers/isdn/hardware/eicon/capifunc.c b/drivers/isdn/hardware/eicon/capifunc.c index ff284aeb8fbb8e..82edc1c1db7a68 100644 --- a/drivers/isdn/hardware/eicon/capifunc.c +++ b/drivers/isdn/hardware/eicon/capifunc.c @@ -189,21 +189,21 @@ void *TransmitBufferSet(APPL * appl, dword ref) { appl->xbuffer_used[ref] = true; DBG_PRV1(("%d:xbuf_used(%d)", appl->Id, ref + 1)) - return (void *) ref; + return (void *)(long)ref; } void *TransmitBufferGet(APPL * appl, void *p) { - if (appl->xbuffer_internal[(dword) p]) - return appl->xbuffer_internal[(dword) p]; + if (appl->xbuffer_internal[(dword)(long)p]) + return appl->xbuffer_internal[(dword)(long)p]; - return appl->xbuffer_ptr[(dword) p]; + return appl->xbuffer_ptr[(dword)(long)p]; } void TransmitBufferFree(APPL * appl, void *p) { - appl->xbuffer_used[(dword) p] = false; - DBG_PRV1(("%d:xbuf_free(%d)", appl->Id, ((dword) p) + 1)) + appl->xbuffer_used[(dword)(long)p] = false; + DBG_PRV1(("%d:xbuf_free(%d)", appl->Id, ((dword)(long)p) + 1)) } void *ReceiveBufferGet(APPL * appl, int Num) @@ -301,7 +301,7 @@ void sendf(APPL * appl, word command, dword Id, word Number, byte * format, ...) /* if DATA_B3_IND, copy data too */ if (command == _DATA_B3_I) { dword data = GET_DWORD(&msg.info.data_b3_ind.Data); - memcpy(write + length, (void *) data, dlength); + memcpy(write + length, (void *)(long)data, dlength); } #ifndef DIVA_NO_DEBUGLIB @@ -318,7 +318,7 @@ void sendf(APPL * appl, word command, dword Id, word Number, byte * format, ...) if (myDriverDebugHandle.dbgMask & DL_BLK) { xlog("\x00\x02", &msg, 0x81, length); for (i = 0; i < dlength; i += 256) { - DBG_BLK((((char *) GET_DWORD(&msg.info.data_b3_ind.Data)) + i, + DBG_BLK((((char *)(long)GET_DWORD(&msg.info.data_b3_ind.Data)) + i, ((dlength - i) < 256) ? (dlength - i) : 256)) if (!(myDriverDebugHandle.dbgMask & DL_PRV0)) break; /* not more if not explicitely requested */ diff --git a/drivers/isdn/hardware/eicon/message.c b/drivers/isdn/hardware/eicon/message.c index 784232a144c815..ccd35d047ec8c3 100644 --- a/drivers/isdn/hardware/eicon/message.c +++ b/drivers/isdn/hardware/eicon/message.c @@ -1,4 +1,3 @@ - /* * Copyright (c) Eicon Networks, 2002. @@ -533,7 +532,7 @@ word api_put(APPL * appl, CAPI_MSG * msg) if (m->header.command == _DATA_B3_R) { - m->info.data_b3_req.Data = (dword)(TransmitBufferSet (appl, m->info.data_b3_req.Data)); + m->info.data_b3_req.Data = (dword)(long)(TransmitBufferSet (appl, m->info.data_b3_req.Data)); } @@ -1032,7 +1031,7 @@ static void plci_free_msg_in_queue (PLCI *plci) { TransmitBufferFree (plci->appl, - (byte *)(((CAPI_MSG *)(&((byte *)(plci->msg_in_queue))[i]))->info.data_b3_req.Data)); + (byte *)(long)(((CAPI_MSG *)(&((byte *)(plci->msg_in_queue))[i]))->info.data_b3_req.Data)); } @@ -3118,7 +3117,7 @@ byte data_b3_req(dword Id, word Number, DIVA_CAPI_ADAPTER * a, PLCI * plci, && (((byte *)(parms[0].info)) < ((byte *)(plci->msg_in_queue)) + sizeof(plci->msg_in_queue))) { - data->P = (byte *)(*((dword *)(parms[0].info))); + data->P = (byte *)(long)(*((dword *)(parms[0].info))); } else @@ -3151,7 +3150,7 @@ byte data_b3_req(dword Id, word Number, DIVA_CAPI_ADAPTER * a, PLCI * plci, && (((byte *)(parms[0].info)) < ((byte *)(plci->msg_in_queue)) + sizeof(plci->msg_in_queue))) { - TransmitBufferFree (appl, (byte *)(*((dword *)(parms[0].info)))); + TransmitBufferFree (appl, (byte *)(long)(*((dword *)(parms[0].info)))); } } @@ -4057,7 +4056,7 @@ capi_callback_suffix: { if (m->header.command == _DATA_B3_R) - TransmitBufferFree (appl, (byte *)(m->info.data_b3_req.Data)); + TransmitBufferFree (appl, (byte *)(long)(m->info.data_b3_req.Data)); dbug(1,dprintf("Error 0x%04x from msg(0x%04x)", i, m->header.command)); break; @@ -7134,7 +7133,7 @@ void nl_ind(PLCI * plci) case N_UDATA: if (!(udata_forwarding_table[plci->NL.RBuffer->P[0] >> 5] & (1L << (plci->NL.RBuffer->P[0] & 0x1f)))) { - plci->RData[0].P = plci->internal_ind_buffer + (-((int)(plci->internal_ind_buffer)) & 3); + plci->RData[0].P = plci->internal_ind_buffer + (-((int)(long)(plci->internal_ind_buffer)) & 3); plci->RData[0].PLength = INTERNAL_IND_BUFFER_SIZE; plci->NL.R = plci->RData; plci->NL.RNum = 1; diff --git a/drivers/isdn/hisax/config.c b/drivers/isdn/hisax/config.c index da4196f21e0fcc..8d53a7fd2671f5 100644 --- a/drivers/isdn/hisax/config.c +++ b/drivers/isdn/hisax/config.c @@ -1551,7 +1551,7 @@ int hisax_register(struct hisax_d_if *hisax_d_if, struct hisax_b_if *b_if[], if (retval == 0) { // yuck cards[i].typ = 0; nrcards--; - return retval; + return -EINVAL; } cs = cards[i].cs; hisax_d_if->cs = cs; diff --git a/drivers/isdn/hisax/hfc_usb.c b/drivers/isdn/hisax/hfc_usb.c index 1f18f19933876d..b1a26e02df0263 100644 --- a/drivers/isdn/hisax/hfc_usb.c +++ b/drivers/isdn/hisax/hfc_usb.c @@ -485,7 +485,6 @@ fill_isoc_urb(struct urb *urb, struct usb_device *dev, unsigned int pipe, { int k; - spin_lock_init(&urb->lock); urb->dev = dev; urb->pipe = pipe; urb->complete = complete; @@ -578,16 +577,14 @@ stop_isoc_chain(usb_fifo * fifo) "HFC-S USB: Stopping iso chain for fifo %i.%i", fifo->fifonum, i); #endif - usb_unlink_urb(fifo->iso[i].purb); + usb_kill_urb(fifo->iso[i].purb); usb_free_urb(fifo->iso[i].purb); fifo->iso[i].purb = NULL; } } - if (fifo->urb) { - usb_unlink_urb(fifo->urb); - usb_free_urb(fifo->urb); - fifo->urb = NULL; - } + usb_kill_urb(fifo->urb); + usb_free_urb(fifo->urb); + fifo->urb = NULL; fifo->active = 0; } @@ -1305,7 +1302,11 @@ usb_init(hfcusb_data * hfc) } /* default Prot: EURO ISDN, should be a module_param */ hfc->protocol = 2; - hisax_register(&hfc->d_if, p_b_if, "hfc_usb", hfc->protocol); + i = hisax_register(&hfc->d_if, p_b_if, "hfc_usb", hfc->protocol); + if (i) { + printk(KERN_INFO "HFC-S USB: hisax_register -> %d\n", i); + return i; + } #ifdef CONFIG_HISAX_DEBUG hfc_debug = debug; @@ -1626,11 +1627,9 @@ hfc_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) #endif /* init the chip and register the driver */ if (usb_init(context)) { - if (context->ctrl_urb) { - usb_unlink_urb(context->ctrl_urb); - usb_free_urb(context->ctrl_urb); - context->ctrl_urb = NULL; - } + usb_kill_urb(context->ctrl_urb); + usb_free_urb(context->ctrl_urb); + context->ctrl_urb = NULL; kfree(context); return (-EIO); } @@ -1682,21 +1681,15 @@ hfc_usb_disconnect(struct usb_interface i); #endif } - if (context->fifos[i].urb) { - usb_unlink_urb(context->fifos[i].urb); - usb_free_urb(context->fifos[i].urb); - context->fifos[i].urb = NULL; - } + usb_kill_urb(context->fifos[i].urb); + usb_free_urb(context->fifos[i].urb); + context->fifos[i].urb = NULL; } context->fifos[i].active = 0; } - /* wait for all URBS to terminate */ - mdelay(10); - if (context->ctrl_urb) { - usb_unlink_urb(context->ctrl_urb); - usb_free_urb(context->ctrl_urb); - context->ctrl_urb = NULL; - } + usb_kill_urb(context->ctrl_urb); + usb_free_urb(context->ctrl_urb); + context->ctrl_urb = NULL; hisax_unregister(&context->d_if); kfree(context); /* free our structure again */ } /* hfc_usb_disconnect */ diff --git a/drivers/isdn/hisax/hisax_fcpcipnp.c b/drivers/isdn/hisax/hisax_fcpcipnp.c index 9e088fce8c3afb..7993e01f9fc5cd 100644 --- a/drivers/isdn/hisax/hisax_fcpcipnp.c +++ b/drivers/isdn/hisax/hisax_fcpcipnp.c @@ -859,7 +859,11 @@ new_adapter(void) for (i = 0; i < 2; i++) b_if[i] = &adapter->bcs[i].b_if; - hisax_register(&adapter->isac.hisax_d_if, b_if, "fcpcipnp", protocol); + if (hisax_register(&adapter->isac.hisax_d_if, b_if, "fcpcipnp", + protocol) != 0) { + kfree(adapter); + adapter = NULL; + } return adapter; } diff --git a/drivers/isdn/hisax/st5481_init.c b/drivers/isdn/hisax/st5481_init.c index bb3a28a53ff4de..13751237bfcde6 100644 --- a/drivers/isdn/hisax/st5481_init.c +++ b/drivers/isdn/hisax/st5481_init.c @@ -107,12 +107,17 @@ static int probe_st5481(struct usb_interface *intf, for (i = 0; i < 2; i++) b_if[i] = &adapter->bcs[i].b_if; - hisax_register(&adapter->hisax_d_if, b_if, "st5481_usb", protocol); + if (hisax_register(&adapter->hisax_d_if, b_if, "st5481_usb", + protocol) != 0) + goto err_b1; + st5481_start(adapter); usb_set_intfdata(intf, adapter); return 0; + err_b1: + st5481_release_b(&adapter->bcs[1]); err_b: st5481_release_b(&adapter->bcs[0]); err_d: diff --git a/drivers/isdn/hisax/st5481_usb.c b/drivers/isdn/hisax/st5481_usb.c index ff159512204880..4ada66b8b6792e 100644 --- a/drivers/isdn/hisax/st5481_usb.c +++ b/drivers/isdn/hisax/st5481_usb.c @@ -407,7 +407,6 @@ fill_isoc_urb(struct urb *urb, struct usb_device *dev, { int k; - spin_lock_init(&urb->lock); urb->dev=dev; urb->pipe=pipe; urb->interval = 1; diff --git a/drivers/isdn/icn/icn.c b/drivers/isdn/icn/icn.c index 1e699bcaba0fde..82d957bde29945 100644 --- a/drivers/isdn/icn/icn.c +++ b/drivers/isdn/icn/icn.c @@ -12,6 +12,7 @@ #include "icn.h" #include <linux/module.h> #include <linux/init.h> +#include <linux/sched.h> static int portbase = ICN_BASEADDR; static unsigned long membase = ICN_MEMADDR; diff --git a/drivers/isdn/sc/message.c b/drivers/isdn/sc/message.c index c5a307e3c496fa..0b4c4f15abdd59 100644 --- a/drivers/isdn/sc/message.c +++ b/drivers/isdn/sc/message.c @@ -16,7 +16,7 @@ * +1 (416) 297-8565 * +1 (416) 297-6433 Facsimile */ - +#include <linux/sched.h> #include "includes.h" #include "hardware.h" #include "message.h" diff --git a/drivers/kvm/kvm.h b/drivers/kvm/kvm.h index 41634fde8e13f0..1c040d80c64178 100644 --- a/drivers/kvm/kvm.h +++ b/drivers/kvm/kvm.h @@ -11,6 +11,7 @@ #include <linux/mutex.h> #include <linux/spinlock.h> #include <linux/mm.h> +#include <asm/signal.h> #include "vmx.h" #include <linux/kvm.h> diff --git a/drivers/kvm/kvm_main.c b/drivers/kvm/kvm_main.c index 0d892600ff00f9..da985b31b17e09 100644 --- a/drivers/kvm/kvm_main.c +++ b/drivers/kvm/kvm_main.c @@ -40,6 +40,7 @@ #include <linux/file.h> #include <linux/fs.h> #include <linux/mount.h> +#include <linux/sched.h> #include "x86_emulate.h" #include "segment_descriptor.h" diff --git a/drivers/kvm/svm.c b/drivers/kvm/svm.c index 9c15f32eea1852..fa17d6d4f0cb64 100644 --- a/drivers/kvm/svm.c +++ b/drivers/kvm/svm.c @@ -19,6 +19,7 @@ #include <linux/vmalloc.h> #include <linux/highmem.h> #include <linux/profile.h> +#include <linux/sched.h> #include <asm/desc.h> #include "kvm_svm.h" diff --git a/drivers/kvm/vmx.c b/drivers/kvm/vmx.c index 724db0027f0003..e6e4d240b2a6aa 100644 --- a/drivers/kvm/vmx.c +++ b/drivers/kvm/vmx.c @@ -22,6 +22,7 @@ #include <linux/mm.h> #include <linux/highmem.h> #include <linux/profile.h> +#include <linux/sched.h> #include <asm/io.h> #include <asm/desc.h> diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig index 58926da0ae18c4..f44c94abd883f9 100644 --- a/drivers/macintosh/Kconfig +++ b/drivers/macintosh/Kconfig @@ -113,7 +113,6 @@ config PMAC_SMU config PMAC_APM_EMU tristate "APM emulation" - select SYS_SUPPORTS_APM_EMULATION select APM_EMULATION depends on ADB_PMU && PM diff --git a/drivers/macintosh/adbhid.c b/drivers/macintosh/adbhid.c index b77ef5187d6d0e..b46817f699f157 100644 --- a/drivers/macintosh/adbhid.c +++ b/drivers/macintosh/adbhid.c @@ -628,16 +628,16 @@ static void real_leds(unsigned char leds, int device) */ static int adbhid_kbd_event(struct input_dev *dev, unsigned int type, unsigned int code, int value) { - struct adbhid *adbhid = dev->private; + struct adbhid *adbhid = input_get_drvdata(dev); unsigned char leds; switch (type) { case EV_LED: - leds = (test_bit(LED_SCROLLL, dev->led) ? 4 : 0) - | (test_bit(LED_NUML, dev->led) ? 1 : 0) - | (test_bit(LED_CAPSL, dev->led) ? 2 : 0); - real_leds(leds, adbhid->id); - return 0; + leds = (test_bit(LED_SCROLLL, dev->led) ? 4 : 0) | + (test_bit(LED_NUML, dev->led) ? 1 : 0) | + (test_bit(LED_CAPSL, dev->led) ? 2 : 0); + real_leds(leds, adbhid->id); + return 0; } return -1; @@ -649,7 +649,7 @@ adb_message_handler(struct notifier_block *this, unsigned long code, void *x) switch (code) { case ADB_MSG_PRE_RESET: case ADB_MSG_POWERDOWN: - /* Stop the repeat timer. Autopoll is already off at this point */ + /* Stop the repeat timer. Autopoll is already off at this point */ { int i; for (i = 1; i < 16; i++) { @@ -699,7 +699,7 @@ adbhid_input_register(int id, int default_id, int original_handler_id, hid->current_handler_id = current_handler_id; hid->mouse_kind = mouse_kind; hid->flags = 0; - input_dev->private = hid; + input_set_drvdata(input_dev, hid); input_dev->name = hid->name; input_dev->phys = hid->phys; input_dev->id.bustype = BUS_ADB; diff --git a/drivers/macintosh/windfarm_core.c b/drivers/macintosh/windfarm_core.c index 192b26e97777e9..11ced17f438a84 100644 --- a/drivers/macintosh/windfarm_core.c +++ b/drivers/macintosh/windfarm_core.c @@ -216,7 +216,10 @@ int wf_register_control(struct wf_control *new_ct) new_ct->attr.attr.mode = 0644; new_ct->attr.show = wf_show_control; new_ct->attr.store = wf_store_control; - device_create_file(&wf_platform_device.dev, &new_ct->attr); + if (device_create_file(&wf_platform_device.dev, &new_ct->attr)) + printk(KERN_WARNING "windfarm: device_create_file failed" + " for %s\n", new_ct->name); + /* the subsystem still does useful work without the file */ DBG("wf: Registered control %s\n", new_ct->name); @@ -326,7 +329,10 @@ int wf_register_sensor(struct wf_sensor *new_sr) new_sr->attr.attr.mode = 0444; new_sr->attr.show = wf_show_sensor; new_sr->attr.store = NULL; - device_create_file(&wf_platform_device.dev, &new_sr->attr); + if (device_create_file(&wf_platform_device.dev, &new_sr->attr)) + printk(KERN_WARNING "windfarm: device_create_file failed" + " for %s\n", new_sr->name); + /* the subsystem still does useful work without the file */ DBG("wf: Registered sensor %s\n", new_sr->name); diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c index 5a4a74c1097c6c..9620d452d030d1 100644 --- a/drivers/md/bitmap.c +++ b/drivers/md/bitmap.c @@ -255,19 +255,25 @@ static struct page *read_sb_page(mddev_t *mddev, long offset, unsigned long inde } -static int write_sb_page(mddev_t *mddev, long offset, struct page *page, int wait) +static int write_sb_page(struct bitmap *bitmap, struct page *page, int wait) { mdk_rdev_t *rdev; struct list_head *tmp; + mddev_t *mddev = bitmap->mddev; ITERATE_RDEV(mddev, rdev, tmp) if (test_bit(In_sync, &rdev->flags) - && !test_bit(Faulty, &rdev->flags)) + && !test_bit(Faulty, &rdev->flags)) { + int size = PAGE_SIZE; + if (page->index == bitmap->file_pages-1) + size = roundup(bitmap->last_page_size, + bdev_hardsect_size(rdev->bdev)); md_super_write(mddev, rdev, - (rdev->sb_offset<<1) + offset + (rdev->sb_offset<<1) + bitmap->offset + page->index * (PAGE_SIZE/512), - PAGE_SIZE, + size, page); + } if (wait) md_super_wait(mddev); @@ -282,7 +288,7 @@ static int write_page(struct bitmap *bitmap, struct page *page, int wait) struct buffer_head *bh; if (bitmap->file == NULL) - return write_sb_page(bitmap->mddev, bitmap->offset, page, wait); + return write_sb_page(bitmap, page, wait); bh = page_buffers(page); @@ -923,6 +929,7 @@ static int bitmap_init_from_disk(struct bitmap *bitmap, sector_t start) } bitmap->filemap[bitmap->file_pages++] = page; + bitmap->last_page_size = count; } paddr = kmap_atomic(page, KM_USER0); if (bitmap->flags & BITMAP_HOSTENDIAN) diff --git a/drivers/md/linear.c b/drivers/md/linear.c index d5ecd2d53046ab..192741083196f2 100644 --- a/drivers/md/linear.c +++ b/drivers/md/linear.c @@ -139,8 +139,6 @@ static linear_conf_t *linear_conf(mddev_t *mddev, int raid_disks) if (!conf) return NULL; - mddev->private = conf; - cnt = 0; conf->array_size = 0; @@ -232,7 +230,7 @@ static linear_conf_t *linear_conf(mddev_t *mddev, int raid_disks) * First calculate the device offsets. */ conf->disks[0].offset = 0; - for (i=1; i<mddev->raid_disks; i++) + for (i = 1; i < raid_disks; i++) conf->disks[i].offset = conf->disks[i-1].offset + conf->disks[i-1].size; @@ -244,7 +242,7 @@ static linear_conf_t *linear_conf(mddev_t *mddev, int raid_disks) curr_offset < conf->array_size; curr_offset += conf->hash_spacing) { - while (i < mddev->raid_disks-1 && + while (i < raid_disks-1 && curr_offset >= conf->disks[i+1].offset) i++; @@ -299,9 +297,11 @@ static int linear_add(mddev_t *mddev, mdk_rdev_t *rdev) */ linear_conf_t *newconf; - if (rdev->raid_disk != mddev->raid_disks) + if (rdev->saved_raid_disk != mddev->raid_disks) return -EINVAL; + rdev->raid_disk = rdev->saved_raid_disk; + newconf = linear_conf(mddev,mddev->raid_disks+1); if (!newconf) diff --git a/drivers/md/md.c b/drivers/md/md.c index c10ce91b64e9b4..1c54f3c1cca74f 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -1298,8 +1298,9 @@ static void super_1_sync(mddev_t *mddev, mdk_rdev_t *rdev) ITERATE_RDEV(mddev,rdev2,tmp) if (rdev2->desc_nr+1 > max_dev) max_dev = rdev2->desc_nr+1; - - sb->max_dev = cpu_to_le32(max_dev); + + if (max_dev > le32_to_cpu(sb->max_dev)) + sb->max_dev = cpu_to_le32(max_dev); for (i=0; i<max_dev;i++) sb->dev_roles[i] = cpu_to_le16(0xfffe); @@ -1365,10 +1366,14 @@ static int bind_rdev_to_array(mdk_rdev_t * rdev, mddev_t * mddev) } /* make sure rdev->size exceeds mddev->size */ if (rdev->size && (mddev->size == 0 || rdev->size < mddev->size)) { - if (mddev->pers) - /* Cannot change size, so fail */ - return -ENOSPC; - else + if (mddev->pers) { + /* Cannot change size, so fail + * If mddev->level <= 0, then we don't care + * about aligning sizes (e.g. linear) + */ + if (mddev->level > 0) + return -ENOSPC; + } else mddev->size = rdev->size; } @@ -2142,6 +2147,9 @@ static void analyze_sbs(mddev_t * mddev) rdev->desc_nr = i++; rdev->raid_disk = rdev->desc_nr; set_bit(In_sync, &rdev->flags); + } else if (rdev->raid_disk >= mddev->raid_disks) { + rdev->raid_disk = -1; + clear_bit(In_sync, &rdev->flags); } } diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c index dfe32149ad3ae1..2c404f73a377d4 100644 --- a/drivers/md/raid0.c +++ b/drivers/md/raid0.c @@ -415,7 +415,7 @@ static int raid0_make_request (request_queue_t *q, struct bio *bio) raid0_conf_t *conf = mddev_to_conf(mddev); struct strip_zone *zone; mdk_rdev_t *tmp_dev; - unsigned long chunk; + sector_t chunk; sector_t block, rsect; const int rw = bio_data_dir(bio); @@ -470,7 +470,6 @@ static int raid0_make_request (request_queue_t *q, struct bio *bio) sector_div(x, zone->nb_dev); chunk = x; - BUG_ON(x != (sector_t)chunk); x = block >> chunksize_bits; tmp_dev = zone->dev[sector_div(x, zone->nb_dev)]; diff --git a/drivers/media/dvb/bt8xx/dst.c b/drivers/media/dvb/bt8xx/dst.c index 0393a3d1992060..e908e3cf1e506f 100644 --- a/drivers/media/dvb/bt8xx/dst.c +++ b/drivers/media/dvb/bt8xx/dst.c @@ -1721,9 +1721,6 @@ static void dst_release(struct dvb_frontend *fe) symbol_put(dst_ca_attach); #endif } -#ifdef CONFIG_DVB_CORE_ATTACH - symbol_put(dst_attach); -#endif kfree(state); } diff --git a/drivers/media/dvb/dvb-core/dvbdev.c b/drivers/media/dvb/dvb-core/dvbdev.c index e23d8a0ea1d330..a9fa3337dd81d6 100644 --- a/drivers/media/dvb/dvb-core/dvbdev.c +++ b/drivers/media/dvb/dvb-core/dvbdev.c @@ -200,7 +200,7 @@ int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev, { struct dvb_device *dvbdev; struct file_operations *dvbdevfops; - + struct class_device *clsdev; int id; mutex_lock(&dvbdev_register_lock); @@ -242,8 +242,15 @@ int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev, mutex_unlock(&dvbdev_register_lock); - class_device_create(dvb_class, NULL, MKDEV(DVB_MAJOR, nums2minor(adap->num, type, id)), - adap->device, "dvb%d.%s%d", adap->num, dnames[type], id); + clsdev = class_device_create(dvb_class, NULL, MKDEV(DVB_MAJOR, + nums2minor(adap->num, type, id)), + adap->device, "dvb%d.%s%d", adap->num, + dnames[type], id); + if (IS_ERR(clsdev)) { + printk(KERN_ERR "%s: failed to create device dvb%d.%s%d (%ld)\n", + __FUNCTION__, adap->num, dnames[type], id, PTR_ERR(clsdev)); + return PTR_ERR(clsdev); + } dprintk("DVB: register adapter%d/%s%d @ minor: %i (0x%02x)\n", adap->num, dnames[type], id, nums2minor(adap->num, type, id), @@ -431,7 +438,7 @@ static void __exit exit_dvbdev(void) unregister_chrdev_region(MKDEV(DVB_MAJOR, 0), MAX_DVB_MINORS); } -module_init(init_dvbdev); +subsys_initcall(init_dvbdev); module_exit(exit_dvbdev); MODULE_DESCRIPTION("DVB Core Driver"); diff --git a/drivers/media/video/cafe_ccic-regs.h b/drivers/media/video/cafe_ccic-regs.h index b2c22a0d6643b4..8e2a87cdc791b1 100644 --- a/drivers/media/video/cafe_ccic-regs.h +++ b/drivers/media/video/cafe_ccic-regs.h @@ -150,6 +150,12 @@ #define REG_GL_IMASK 0x300c /* Interrupt mask register */ #define GIMSK_CCIC_EN 0x00000004 /* CCIC Interrupt enable */ +#define REG_GL_FCR 0x3038 /* GPIO functional control register */ +#define GFCR_GPIO_ON 0x08 /* Camera GPIO enabled */ +#define REG_GL_GPIOR 0x315c /* GPIO register */ +#define GGPIO_OUT 0x80000 /* GPIO output */ +#define GGPIO_VAL 0x00008 /* Output pin value */ + #define REG_LEN REG_GL_IMASK + 4 diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c index 96254dbaf6252f..c08f650df42337 100644 --- a/drivers/media/video/cafe_ccic.c +++ b/drivers/media/video/cafe_ccic.c @@ -775,6 +775,12 @@ static void cafe_ctlr_power_up(struct cafe_camera *cam) spin_lock_irqsave(&cam->dev_lock, flags); cafe_reg_clear_bit(cam, REG_CTRL1, C1_PWRDWN); /* + * Part one of the sensor dance: turn the global + * GPIO signal on. + */ + cafe_reg_write(cam, REG_GL_FCR, GFCR_GPIO_ON); + cafe_reg_write(cam, REG_GL_GPIOR, GGPIO_OUT|GGPIO_VAL); + /* * Put the sensor into operational mode (assumes OLPC-style * wiring). Control 0 is reset - set to 1 to operate. * Control 1 is power down, set to 0 to operate. @@ -784,6 +790,7 @@ static void cafe_ctlr_power_up(struct cafe_camera *cam) cafe_reg_write(cam, REG_GPR, GPR_C1EN|GPR_C0EN|GPR_C0); // mdelay(1); /* Enough? */ spin_unlock_irqrestore(&cam->dev_lock, flags); + msleep(5); /* Just to be sure */ } static void cafe_ctlr_power_down(struct cafe_camera *cam) @@ -792,6 +799,8 @@ static void cafe_ctlr_power_down(struct cafe_camera *cam) spin_lock_irqsave(&cam->dev_lock, flags); cafe_reg_write(cam, REG_GPR, GPR_C1EN|GPR_C0EN|GPR_C1); + cafe_reg_write(cam, REG_GL_FCR, GFCR_GPIO_ON); + cafe_reg_write(cam, REG_GL_GPIOR, GGPIO_OUT); cafe_reg_set_bit(cam, REG_CTRL1, C1_PWRDWN); spin_unlock_irqrestore(&cam->dev_lock, flags); } @@ -851,6 +860,7 @@ static int cafe_cam_init(struct cafe_camera *cam) ret = 0; cam->state = S_IDLE; out: + cafe_ctlr_power_down(cam); mutex_unlock(&cam->s_mutex); return ret; } @@ -2103,10 +2113,16 @@ static int cafe_pci_probe(struct pci_dev *pdev, ret = request_irq(pdev->irq, cafe_irq, IRQF_SHARED, "cafe-ccic", cam); if (ret) goto out_iounmap; + /* + * Initialize the controller and leave it powered up. It will + * stay that way until the sensor driver shows up. + */ cafe_ctlr_init(cam); cafe_ctlr_power_up(cam); /* - * Set up I2C/SMBUS communications + * Set up I2C/SMBUS communications. We have to drop the mutex here + * because the sensor could attach in this call chain, leading to + * unsightly deadlocks. */ mutex_unlock(&cam->s_mutex); /* attach can deadlock */ ret = cafe_smbus_setup(cam); diff --git a/drivers/media/video/em28xx/Kconfig b/drivers/media/video/em28xx/Kconfig index 2c450bd05af5c2..5b6a4037160245 100644 --- a/drivers/media/video/em28xx/Kconfig +++ b/drivers/media/video/em28xx/Kconfig @@ -1,7 +1,6 @@ config VIDEO_EM28XX tristate "Empia EM2800/2820/2840 USB video capture support" - depends on VIDEO_V4L1 && I2C && PCI - select VIDEO_BUF + depends on VIDEO_V4L1 && I2C select VIDEO_TUNER select VIDEO_TVEEPROM select VIDEO_IR diff --git a/drivers/media/video/ivtv/Kconfig b/drivers/media/video/ivtv/Kconfig index 0cc98a0e249671..1aaeaa02f158ec 100644 --- a/drivers/media/video/ivtv/Kconfig +++ b/drivers/media/video/ivtv/Kconfig @@ -1,6 +1,6 @@ config VIDEO_IVTV tristate "Conexant cx23416/cx23415 MPEG encoder/decoder support" - depends on VIDEO_V4L1 && VIDEO_V4L2 && USB && I2C && EXPERIMENTAL && PCI + depends on VIDEO_V4L1 && VIDEO_V4L2 && PCI && I2C && EXPERIMENTAL select FW_LOADER select VIDEO_TUNER select VIDEO_TVEEPROM diff --git a/drivers/media/video/ivtv/ivtv-driver.h b/drivers/media/video/ivtv/ivtv-driver.h index 9a412d6c6d06c6..552f04511eadf9 100644 --- a/drivers/media/video/ivtv/ivtv-driver.h +++ b/drivers/media/video/ivtv/ivtv-driver.h @@ -67,14 +67,6 @@ #include <media/ivtv.h> -#ifdef CONFIG_LIRC_I2C -# error "This driver is not compatible with the LIRC I2C kernel configuration option." -#endif /* CONFIG_LIRC_I2C */ - -#ifndef CONFIG_PCI -# error "This driver requires kernel PCI support." -#endif /* CONFIG_PCI */ - #define IVTV_ENCODER_OFFSET 0x00000000 #define IVTV_ENCODER_SIZE 0x00800000 /* Last half isn't needed 0x01000000 */ diff --git a/drivers/media/video/ivtv/ivtv-ioctl.c b/drivers/media/video/ivtv/ivtv-ioctl.c index 794a6a02f82f16..1989ec1cb97361 100644 --- a/drivers/media/video/ivtv/ivtv-ioctl.c +++ b/drivers/media/video/ivtv/ivtv-ioctl.c @@ -362,8 +362,6 @@ static int ivtv_get_fmt(struct ivtv *itv, int streamtype, struct v4l2_format *fm case V4L2_BUF_TYPE_VIDEO_OUTPUT: if (!(itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT)) return -EINVAL; - fmt->fmt.pix.left = itv->main_rect.left; - fmt->fmt.pix.top = itv->main_rect.top; fmt->fmt.pix.width = itv->main_rect.width; fmt->fmt.pix.height = itv->main_rect.height; fmt->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; @@ -402,8 +400,6 @@ static int ivtv_get_fmt(struct ivtv *itv, int streamtype, struct v4l2_format *fm break; case V4L2_BUF_TYPE_VIDEO_CAPTURE: - fmt->fmt.pix.left = 0; - fmt->fmt.pix.top = 0; fmt->fmt.pix.width = itv->params.width; fmt->fmt.pix.height = itv->params.height; fmt->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; @@ -498,15 +494,13 @@ static int ivtv_try_or_set_fmt(struct ivtv *itv, int streamtype, if (!(itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT)) return -EINVAL; field = fmt->fmt.pix.field; - r.top = fmt->fmt.pix.top; - r.left = fmt->fmt.pix.left; + r.top = 0; + r.left = 0; r.width = fmt->fmt.pix.width; r.height = fmt->fmt.pix.height; ivtv_get_fmt(itv, streamtype, fmt); if (itv->output_mode != OUT_UDMA_YUV) { /* TODO: would setting the rect also be valid for this mode? */ - fmt->fmt.pix.top = r.top; - fmt->fmt.pix.left = r.left; fmt->fmt.pix.width = r.width; fmt->fmt.pix.height = r.height; } @@ -1141,8 +1135,6 @@ int ivtv_v4l2_ioctls(struct ivtv *itv, struct file *filp, unsigned int cmd, void fb->fmt.pixelformat = itv->osd_pixelformat; fb->fmt.width = itv->osd_rect.width; fb->fmt.height = itv->osd_rect.height; - fb->fmt.left = itv->osd_rect.left; - fb->fmt.top = itv->osd_rect.top; fb->base = (void *)itv->osd_video_pbase; if (itv->osd_global_alpha_state) fb->flags |= V4L2_FBUF_FLAG_GLOBAL_ALPHA; diff --git a/drivers/media/video/ov7670.c b/drivers/media/video/ov7670.c index 03bc369a9e49a7..3ceb8a6249ddf1 100644 --- a/drivers/media/video/ov7670.c +++ b/drivers/media/video/ov7670.c @@ -720,12 +720,22 @@ static int ov7670_s_fmt(struct i2c_client *c, struct v4l2_format *fmt) struct ov7670_format_struct *ovfmt; struct ov7670_win_size *wsize; struct ov7670_info *info = i2c_get_clientdata(c); - unsigned char com7; + unsigned char com7, clkrc; ret = ov7670_try_fmt(c, fmt, &ovfmt, &wsize); if (ret) return ret; /* + * HACK: if we're running rgb565 we need to grab then rewrite + * CLKRC. If we're *not*, however, then rewriting clkrc hoses + * the colors. + */ + if (fmt->fmt.pix.pixelformat == V4L2_PIX_FMT_RGB565) { + ret = ov7670_read(c, REG_CLKRC, &clkrc); + if (ret) + return ret; + } + /* * COM7 is a pain in the ass, it doesn't like to be read then * quickly written afterward. But we have everything we need * to set it absolutely here, as long as the format-specific @@ -744,7 +754,10 @@ static int ov7670_s_fmt(struct i2c_client *c, struct v4l2_format *fmt) if (wsize->regs) ret = ov7670_write_array(c, wsize->regs); info->fmt = ovfmt; - return 0; + + if (fmt->fmt.pix.pixelformat == V4L2_PIX_FMT_RGB565 && ret == 0) + ret = ov7670_write(c, REG_CLKRC, clkrc); + return ret; } /* @@ -1267,7 +1280,9 @@ static int ov7670_attach(struct i2c_adapter *adapter) ret = ov7670_detect(client); if (ret) goto out_free_info; - i2c_attach_client(client); + ret = i2c_attach_client(client); + if (ret) + goto out_free_info; return 0; out_free_info: diff --git a/drivers/media/video/tuner-simple.c b/drivers/media/video/tuner-simple.c index 1b9b0742f753f5..c40b92ce1fadef 100644 --- a/drivers/media/video/tuner-simple.c +++ b/drivers/media/video/tuner-simple.c @@ -205,9 +205,13 @@ static void default_set_tv_freq(struct i2c_client *c, unsigned int freq) /* 0x01 -> ??? no change ??? */ /* 0x02 -> PAL BDGHI / SECAM L */ /* 0x04 -> ??? PAL others / SECAM others ??? */ - cb &= ~0x02; - if (t->std & V4L2_STD_SECAM) - cb |= 0x02; + cb &= ~0x03; + if (t->std & V4L2_STD_SECAM_L) //also valid for V4L2_STD_SECAM + cb |= PHILIPS_MF_SET_PAL_L; + else if (t->std & V4L2_STD_SECAM_LC) + cb |= PHILIPS_MF_SET_PAL_L2; + else /* V4L2_STD_B|V4L2_STD_GH */ + cb |= PHILIPS_MF_SET_BG; break; case TUNER_TEMIC_4046FM5: diff --git a/drivers/message/fusion/mptbase.h b/drivers/message/fusion/mptbase.h index d25d3be8fcd2f0..165f81d16d00e9 100644 --- a/drivers/message/fusion/mptbase.h +++ b/drivers/message/fusion/mptbase.h @@ -436,7 +436,7 @@ typedef struct _MPT_SAS_MGMT { typedef struct _mpt_ioctl_events { u32 event; /* Specified by define above */ u32 eventContext; /* Index or counter */ - int data[2]; /* First 8 bytes of Event Data */ + u32 data[2]; /* First 8 bytes of Event Data */ } MPT_IOCTL_EVENTS; /* diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c index 561074a04b03ce..bc740a6dd93c61 100644 --- a/drivers/message/fusion/mptscsih.c +++ b/drivers/message/fusion/mptscsih.c @@ -2423,11 +2423,11 @@ mptscsih_copy_sense_data(struct scsi_cmnd *sc, MPT_SCSI_HOST *hd, MPT_FRAME_HDR ioc->events[idx].event = MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE; ioc->events[idx].eventContext = ioc->eventContext; - ioc->events[idx].data[0] = (pReq->LUN[1] << 24) || - (MPI_EVENT_SCSI_DEV_STAT_RC_SMART_DATA << 16) || - (sc->device->channel << 8) || sc->device->id; + ioc->events[idx].data[0] = (pReq->LUN[1] << 24) | + (MPI_EVENT_SCSI_DEV_STAT_RC_SMART_DATA << 16) | + (sc->device->channel << 8) | sc->device->id; - ioc->events[idx].data[1] = (sense_data[13] << 8) || sense_data[12]; + ioc->events[idx].data[1] = (sense_data[13] << 8) | sense_data[12]; ioc->eventContext++; if (hd->ioc->pcidev->vendor == diff --git a/drivers/message/i2o/driver.c b/drivers/message/i2o/driver.c index d3235f213c8933..e0d474b174336b 100644 --- a/drivers/message/i2o/driver.c +++ b/drivers/message/i2o/driver.c @@ -123,8 +123,12 @@ int i2o_driver_register(struct i2o_driver *drv) } rc = driver_register(&drv->driver); - if (rc) - destroy_workqueue(drv->event_queue); + if (rc) { + if (drv->event) { + destroy_workqueue(drv->event_queue); + drv->event_queue = NULL; + } + } return rc; }; @@ -256,7 +260,7 @@ void i2o_driver_notify_controller_add_all(struct i2o_controller *c) int i; struct i2o_driver *drv; - for (i = 0; i < I2O_MAX_DRIVERS; i++) { + for (i = 0; i < i2o_max_drivers; i++) { drv = i2o_drivers[i]; if (drv) @@ -276,7 +280,7 @@ void i2o_driver_notify_controller_remove_all(struct i2o_controller *c) int i; struct i2o_driver *drv; - for (i = 0; i < I2O_MAX_DRIVERS; i++) { + for (i = 0; i < i2o_max_drivers; i++) { drv = i2o_drivers[i]; if (drv) @@ -295,7 +299,7 @@ void i2o_driver_notify_device_add_all(struct i2o_device *i2o_dev) int i; struct i2o_driver *drv; - for (i = 0; i < I2O_MAX_DRIVERS; i++) { + for (i = 0; i < i2o_max_drivers; i++) { drv = i2o_drivers[i]; if (drv) @@ -314,7 +318,7 @@ void i2o_driver_notify_device_remove_all(struct i2o_device *i2o_dev) int i; struct i2o_driver *drv; - for (i = 0; i < I2O_MAX_DRIVERS; i++) { + for (i = 0; i < i2o_max_drivers; i++) { drv = i2o_drivers[i]; if (drv) @@ -335,17 +339,15 @@ int __init i2o_driver_init(void) spin_lock_init(&i2o_drivers_lock); - if ((i2o_max_drivers < 2) || (i2o_max_drivers > 64) || - ((i2o_max_drivers ^ (i2o_max_drivers - 1)) != - (2 * i2o_max_drivers - 1))) { - osm_warn("max_drivers set to %d, but must be >=2 and <= 64 and " - "a power of 2\n", i2o_max_drivers); + if ((i2o_max_drivers < 2) || (i2o_max_drivers > 64)) { + osm_warn("max_drivers set to %d, but must be >=2 and <= 64\n", + i2o_max_drivers); i2o_max_drivers = I2O_MAX_DRIVERS; } osm_info("max drivers = %d\n", i2o_max_drivers); i2o_drivers = - kzalloc(i2o_max_drivers * sizeof(*i2o_drivers), GFP_KERNEL); + kcalloc(i2o_max_drivers, sizeof(*i2o_drivers), GFP_KERNEL); if (!i2o_drivers) return -ENOMEM; diff --git a/drivers/mfd/ucb1x00-ts.c b/drivers/mfd/ucb1x00-ts.c index cb8c264eaff07e..7772bd1d92b4be 100644 --- a/drivers/mfd/ucb1x00-ts.c +++ b/drivers/mfd/ucb1x00-ts.c @@ -207,16 +207,7 @@ static int ucb1x00_thread(void *_ts) struct ucb1x00_ts *ts = _ts; struct task_struct *tsk = current; DECLARE_WAITQUEUE(wait, tsk); - int valid; - - /* - * We could run as a real-time thread. However, thus far - * this doesn't seem to be necessary. - */ -// tsk->policy = SCHED_FIFO; -// tsk->rt_priority = 1; - - valid = 0; + int valid = 0; add_wait_queue(&ts->irq_wait, &wait); while (!kthread_should_stop()) { diff --git a/drivers/misc/phantom.c b/drivers/misc/phantom.c index 35b139b0e5f2a0..5108b7c576dfba 100644 --- a/drivers/misc/phantom.c +++ b/drivers/misc/phantom.c @@ -47,6 +47,7 @@ struct phantom_device { struct cdev cdev; struct mutex open_lock; + spinlock_t ioctl_lock; }; static unsigned char phantom_devices[PHANTOM_MAX_MINORS]; @@ -59,8 +60,11 @@ static int phantom_status(struct phantom_device *dev, unsigned long newstat) atomic_set(&dev->counter, 0); iowrite32(PHN_CTL_IRQ, dev->iaddr + PHN_CONTROL); iowrite32(0x43, dev->caddr + PHN_IRQCTL); - } else if ((dev->status & PHB_RUNNING) && !(newstat & PHB_RUNNING)) + ioread32(dev->caddr + PHN_IRQCTL); /* PCI posting */ + } else if ((dev->status & PHB_RUNNING) && !(newstat & PHB_RUNNING)) { iowrite32(0, dev->caddr + PHN_IRQCTL); + ioread32(dev->caddr + PHN_IRQCTL); /* PCI posting */ + } dev->status = newstat; @@ -71,8 +75,8 @@ static int phantom_status(struct phantom_device *dev, unsigned long newstat) * File ops */ -static int phantom_ioctl(struct inode *inode, struct file *file, u_int cmd, - u_long arg) +static long phantom_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { struct phantom_device *dev = file->private_data; struct phm_regs rs; @@ -92,24 +96,32 @@ static int phantom_ioctl(struct inode *inode, struct file *file, u_int cmd, if (r.reg > 7) return -EINVAL; + spin_lock(&dev->ioctl_lock); if (r.reg == PHN_CONTROL && (r.value & PHN_CTL_IRQ) && - phantom_status(dev, dev->status | PHB_RUNNING)) + phantom_status(dev, dev->status | PHB_RUNNING)){ + spin_unlock(&dev->ioctl_lock); return -ENODEV; + } pr_debug("phantom: writing %x to %u\n", r.value, r.reg); iowrite32(r.value, dev->iaddr + r.reg); + ioread32(dev->iaddr); /* PCI posting */ if (r.reg == PHN_CONTROL && !(r.value & PHN_CTL_IRQ)) phantom_status(dev, dev->status & ~PHB_RUNNING); + spin_unlock(&dev->ioctl_lock); break; case PHN_SET_REGS: if (copy_from_user(&rs, argp, sizeof(rs))) return -EFAULT; pr_debug("phantom: SRS %u regs %x\n", rs.count, rs.mask); + spin_lock(&dev->ioctl_lock); for (i = 0; i < min(rs.count, 8U); i++) if ((1 << i) & rs.mask) iowrite32(rs.values[i], dev->oaddr + i); + ioread32(dev->iaddr); /* PCI posting */ + spin_unlock(&dev->ioctl_lock); break; case PHN_GET_REG: if (copy_from_user(&r, argp, sizeof(r))) @@ -128,9 +140,11 @@ static int phantom_ioctl(struct inode *inode, struct file *file, u_int cmd, return -EFAULT; pr_debug("phantom: GRS %u regs %x\n", rs.count, rs.mask); + spin_lock(&dev->ioctl_lock); for (i = 0; i < min(rs.count, 8U); i++) if ((1 << i) & rs.mask) rs.values[i] = ioread32(dev->iaddr + i); + spin_unlock(&dev->ioctl_lock); if (copy_to_user(argp, &rs, sizeof(rs))) return -EFAULT; @@ -199,7 +213,7 @@ static unsigned int phantom_poll(struct file *file, poll_table *wait) static struct file_operations phantom_file_ops = { .open = phantom_open, .release = phantom_release, - .ioctl = phantom_ioctl, + .unlocked_ioctl = phantom_ioctl, .poll = phantom_poll, }; @@ -212,6 +226,7 @@ static irqreturn_t phantom_isr(int irq, void *data) iowrite32(0, dev->iaddr); iowrite32(0xc0, dev->iaddr); + ioread32(dev->iaddr); /* PCI posting */ atomic_inc(&dev->counter); wake_up_interruptible(&dev->wait); @@ -282,11 +297,13 @@ static int __devinit phantom_probe(struct pci_dev *pdev, } mutex_init(&pht->open_lock); + spin_lock_init(&pht->ioctl_lock); init_waitqueue_head(&pht->wait); cdev_init(&pht->cdev, &phantom_file_ops); pht->cdev.owner = THIS_MODULE; iowrite32(0, pht->caddr + PHN_IRQCTL); + ioread32(pht->caddr + PHN_IRQCTL); /* PCI posting */ retval = request_irq(pdev->irq, phantom_isr, IRQF_SHARED | IRQF_DISABLED, "phantom", pht); if (retval) { @@ -337,6 +354,7 @@ static void __devexit phantom_remove(struct pci_dev *pdev) cdev_del(&pht->cdev); iowrite32(0, pht->caddr + PHN_IRQCTL); + ioread32(pht->caddr + PHN_IRQCTL); /* PCI posting */ free_irq(pdev->irq, pht); pci_iounmap(pdev, pht->oaddr); @@ -358,6 +376,7 @@ static int phantom_suspend(struct pci_dev *pdev, pm_message_t state) struct phantom_device *dev = pci_get_drvdata(pdev); iowrite32(0, dev->caddr + PHN_IRQCTL); + ioread32(dev->caddr + PHN_IRQCTL); /* PCI posting */ return 0; } diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index a7562f7fc0b33b..540ff4bea54c6f 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -135,23 +135,6 @@ struct mmc_blk_request { struct mmc_data data; }; -static int mmc_blk_prep_rq(struct mmc_queue *mq, struct request *req) -{ - struct mmc_blk_data *md = mq->data; - int stat = BLKPREP_OK; - - /* - * If we have no device, we haven't finished initialising. - */ - if (!md || !mq->card) { - printk(KERN_ERR "%s: killing request - no device/host\n", - req->rq_disk->disk_name); - stat = BLKPREP_KILL; - } - - return stat; -} - static u32 mmc_sd_num_wr_blocks(struct mmc_card *card) { int err; @@ -460,7 +443,6 @@ static struct mmc_blk_data *mmc_blk_alloc(struct mmc_card *card) if (ret) goto err_putdisk; - md->queue.prep_fn = mmc_blk_prep_rq; md->queue.issue_fn = mmc_blk_issue_rq; md->queue.data = md; diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c index 2e77963db334d1..dd97bc798409eb 100644 --- a/drivers/mmc/card/queue.c +++ b/drivers/mmc/card/queue.c @@ -20,40 +20,21 @@ #define MMC_QUEUE_SUSPENDED (1 << 0) /* - * Prepare a MMC request. Essentially, this means passing the - * preparation off to the media driver. The media driver will - * create a mmc_io_request in req->special. + * Prepare a MMC request. This just filters out odd stuff. */ static int mmc_prep_request(struct request_queue *q, struct request *req) { - struct mmc_queue *mq = q->queuedata; - int ret = BLKPREP_KILL; - - if (blk_special_request(req)) { - /* - * Special commands already have the command - * blocks already setup in req->special. - */ - BUG_ON(!req->special); - - ret = BLKPREP_OK; - } else if (blk_fs_request(req) || blk_pc_request(req)) { - /* - * Block I/O requests need translating according - * to the protocol. - */ - ret = mq->prep_fn(mq, req); - } else { - /* - * Everything else is invalid. - */ + /* + * We only like normal block requests. + */ + if (!blk_fs_request(req) && !blk_pc_request(req)) { blk_dump_rq_flags(req, "MMC bad request"); + return BLKPREP_KILL; } - if (ret == BLKPREP_OK) - req->cmd_flags |= REQ_DONTPREP; + req->cmd_flags |= REQ_DONTPREP; - return ret; + return BLKPREP_OK; } static int mmc_queue_thread(void *d) diff --git a/drivers/mmc/card/queue.h b/drivers/mmc/card/queue.h index c9f139e764f6ce..1590b3f3f1f7d8 100644 --- a/drivers/mmc/card/queue.h +++ b/drivers/mmc/card/queue.h @@ -10,20 +10,12 @@ struct mmc_queue { struct semaphore thread_sem; unsigned int flags; struct request *req; - int (*prep_fn)(struct mmc_queue *, struct request *); int (*issue_fn)(struct mmc_queue *, struct request *); void *data; struct request_queue *queue; struct scatterlist *sg; }; -struct mmc_io_request { - struct request *rq; - int num; - struct mmc_command selcmd; /* mmc_queue private */ - struct mmc_command cmd[4]; /* max 4 commands */ -}; - extern int mmc_init_queue(struct mmc_queue *, struct mmc_card *, spinlock_t *); extern void mmc_cleanup_queue(struct mmc_queue *); extern void mmc_queue_suspend(struct mmc_queue *); diff --git a/drivers/mtd/ubi/eba.c b/drivers/mtd/ubi/eba.c index 3dba5733ed1feb..74002945b71b6d 100644 --- a/drivers/mtd/ubi/eba.c +++ b/drivers/mtd/ubi/eba.c @@ -940,9 +940,6 @@ static void ltree_entry_ctor(void *obj, struct kmem_cache *cache, { struct ltree_entry *le = obj; - if (flags & SLAB_CTOR_CONSTRUCTOR) - return; - le->users = 0; init_rwsem(&le->mutex); } diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index c5baa197bc08b6..1798a9f9fb2557 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2218,7 +2218,7 @@ config SK98LIN config VIA_VELOCITY tristate "VIA Velocity support" - depends on NET_PCI && PCI + depends on PCI select CRC32 select CRC_CCITT select MII @@ -2280,7 +2280,6 @@ config GFAR_NAPI config UCC_GETH tristate "Freescale QE Gigabit Ethernet" depends on QUICC_ENGINE - select UCC_FAST help This driver supports the Gigabit Ethernet mode of the QUICC Engine, which is available on some Freescale SOCs. diff --git a/drivers/net/arcnet/Kconfig b/drivers/net/arcnet/Kconfig index 7284ccad0b9193..4030274fe788d1 100644 --- a/drivers/net/arcnet/Kconfig +++ b/drivers/net/arcnet/Kconfig @@ -2,10 +2,8 @@ # Arcnet configuration # -menu "ARCnet devices" +menuconfig ARCNET depends on NETDEVICES && (ISA || PCI) - -config ARCNET tristate "ARCnet support" ---help--- If you have a network card of this type, say Y and check out the @@ -25,9 +23,10 @@ config ARCNET <file:Documentation/networking/net-modules.txt>. The module will be called arcnet. +if ARCNET + config ARCNET_1201 tristate "Enable standard ARCNet packet format (RFC 1201)" - depends on ARCNET help This allows you to use RFC1201 with your ARCnet card via the virtual arc0 device. You need to say Y here to communicate with @@ -38,7 +37,6 @@ config ARCNET_1201 config ARCNET_1051 tristate "Enable old ARCNet packet format (RFC 1051)" - depends on ARCNET ---help--- This allows you to use RFC1051 with your ARCnet card via the virtual arc0s device. You only need arc0s if you want to talk to ARCnet @@ -53,7 +51,6 @@ config ARCNET_1051 config ARCNET_RAW tristate "Enable raw mode packet interface" - depends on ARCNET help ARCnet "raw mode" packet encapsulation, no soft headers. Unlikely to work unless talking to a copy of the same Linux arcnet driver, @@ -61,7 +58,6 @@ config ARCNET_RAW config ARCNET_CAP tristate "Enable CAP mode packet interface" - depends on ARCNET help ARCnet "cap mode" packet encapsulation. Used to get the hardware acknowledge back to userspace. After the initial protocol byte every @@ -80,7 +76,6 @@ config ARCNET_CAP config ARCNET_COM90xx tristate "ARCnet COM90xx (normal) chipset driver" - depends on ARCNET help This is the chipset driver for the standard COM90xx cards. If you have always used the old ARCnet driver without knowing what type of @@ -92,7 +87,6 @@ config ARCNET_COM90xx config ARCNET_COM90xxIO tristate "ARCnet COM90xx (IO mapped) chipset driver" - depends on ARCNET ---help--- This is the chipset driver for the COM90xx cards, using them in IO-mapped mode instead of memory-mapped mode. This is slower than @@ -105,7 +99,6 @@ config ARCNET_COM90xxIO config ARCNET_RIM_I tristate "ARCnet COM90xx (RIM I) chipset driver" - depends on ARCNET ---help--- This is yet another chipset driver for the COM90xx cards, but this time only using memory-mapped mode, and no IO ports at all. This @@ -118,7 +111,6 @@ config ARCNET_RIM_I config ARCNET_COM20020 tristate "ARCnet COM20020 chipset driver" - depends on ARCNET help This is the driver for the new COM20020 chipset. It supports such things as promiscuous mode, so packet sniffing is possible, and @@ -136,5 +128,4 @@ config ARCNET_COM20020_PCI tristate "Support for COM20020 on PCI" depends on ARCNET_COM20020 && PCI -endmenu - +endif # ARCNET diff --git a/drivers/net/cassini.c b/drivers/net/cassini.c index 4aec747d9e437a..9fe3a38883ee70 100644 --- a/drivers/net/cassini.c +++ b/drivers/net/cassini.c @@ -4919,7 +4919,10 @@ static int __devinit cas_init_one(struct pci_dev *pdev, pci_cmd &= ~PCI_COMMAND_SERR; pci_cmd |= PCI_COMMAND_PARITY; pci_write_config_word(pdev, PCI_COMMAND, pci_cmd); - pci_set_mwi(pdev); + if (pci_set_mwi(pdev)) + printk(KERN_WARNING PFX "Could enable MWI for %s\n", + pci_name(pdev)); + /* * On some architectures, the default cache line size set * by pci_set_mwi reduces perforamnce. We have to increase diff --git a/drivers/net/chelsio/suni1x10gexp_regs.h b/drivers/net/chelsio/suni1x10gexp_regs.h index 269d097dd92766..d0f87d82566aa4 100644 --- a/drivers/net/chelsio/suni1x10gexp_regs.h +++ b/drivers/net/chelsio/suni1x10gexp_regs.h @@ -105,7 +105,7 @@ #define mSUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_LOW(filterId) (0x204A + mSUNI1x10GEXP_MAC_FILTER_OFFSET(filterId)) #define mSUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_MID(filterId) (0x204B + mSUNI1x10GEXP_MAC_FILTER_OFFSET(filterId)) #define mSUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_HIGH(filterId)(0x204C + mSUNI1x10GEXP_MAC_FILTER_OFFSET(filterId)) -#define mSUNI1x10GEXP_REG_RXXG_EXACT_MATCH_VID(filterId) (0x2062 + mSUNI1x10GEXP_MAC_VID_FILTER_OFFSET(filterId) +#define mSUNI1x10GEXP_REG_RXXG_EXACT_MATCH_VID(filterId) (0x2062 + mSUNI1x10GEXP_MAC_VID_FILTER_OFFSET(filterId)) #define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_0_LOW 0x204A #define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_0_MID 0x204B #define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_0_HIGH 0x204C diff --git a/drivers/net/declance.c b/drivers/net/declance.c index 95d854e2295c2d..b2577f40124e39 100644 --- a/drivers/net/declance.c +++ b/drivers/net/declance.c @@ -932,8 +932,6 @@ static int lance_start_xmit(struct sk_buff *skb, struct net_device *dev) /* Kick the lance: transmit now */ writereg(&ll->rdp, LE_C0_INEA | LE_C0_TDMD); - spin_unlock_irq(&lp->lock); - dev->trans_start = jiffies; dev_kfree_skb(skb); diff --git a/drivers/net/defxx.c b/drivers/net/defxx.c index 571d82f8008c4e..7df23dc28190c3 100644 --- a/drivers/net/defxx.c +++ b/drivers/net/defxx.c @@ -566,6 +566,7 @@ static int __devinit dfx_register(struct device *bdev) bp->base.mem = ioremap_nocache(bar_start, bar_len); if (!bp->base.mem) { printk(KERN_ERR "%s: Cannot map MMIO\n", print_name); + err = -ENOMEM; goto err_out_region; } } else { diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h index a9ea67e75c1b32..16a6edfeba41d3 100644 --- a/drivers/net/e1000/e1000.h +++ b/drivers/net/e1000/e1000.h @@ -333,11 +333,9 @@ struct e1000_adapter { struct e1000_tx_ring test_tx_ring; struct e1000_rx_ring test_rx_ring; - int msg_enable; -#ifdef CONFIG_PCI_MSI boolean_t have_msi; -#endif + /* to not mess up cache alignment, always add to the bottom */ boolean_t tso_force; boolean_t smart_power_down; /* phy smart power down */ diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 637ae8f6879199..9ec35b7a820713 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -158,9 +158,7 @@ static struct net_device_stats * e1000_get_stats(struct net_device *netdev); static int e1000_change_mtu(struct net_device *netdev, int new_mtu); static int e1000_set_mac(struct net_device *netdev, void *p); static irqreturn_t e1000_intr(int irq, void *data); -#ifdef CONFIG_PCI_MSI static irqreturn_t e1000_intr_msi(int irq, void *data); -#endif static boolean_t e1000_clean_tx_irq(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring); #ifdef CONFIG_E1000_NAPI @@ -300,31 +298,26 @@ module_exit(e1000_exit_module); static int e1000_request_irq(struct e1000_adapter *adapter) { struct net_device *netdev = adapter->netdev; - int flags, err = 0; + void (*handler) = &e1000_intr; + int irq_flags = IRQF_SHARED; + int err; - flags = IRQF_SHARED; -#ifdef CONFIG_PCI_MSI if (adapter->hw.mac_type >= e1000_82571) { - adapter->have_msi = TRUE; - if ((err = pci_enable_msi(adapter->pdev))) { - DPRINTK(PROBE, ERR, - "Unable to allocate MSI interrupt Error: %d\n", err); - adapter->have_msi = FALSE; + adapter->have_msi = !pci_enable_msi(adapter->pdev); + if (adapter->have_msi) { + handler = &e1000_intr_msi; + irq_flags = 0; } } - if (adapter->have_msi) { - flags &= ~IRQF_SHARED; - err = request_irq(adapter->pdev->irq, &e1000_intr_msi, flags, - netdev->name, netdev); - if (err) - DPRINTK(PROBE, ERR, - "Unable to allocate interrupt Error: %d\n", err); - } else -#endif - if ((err = request_irq(adapter->pdev->irq, &e1000_intr, flags, - netdev->name, netdev))) + + err = request_irq(adapter->pdev->irq, handler, irq_flags, netdev->name, + netdev); + if (err) { + if (adapter->have_msi) + pci_disable_msi(adapter->pdev); DPRINTK(PROBE, ERR, "Unable to allocate interrupt Error: %d\n", err); + } return err; } @@ -335,10 +328,8 @@ static void e1000_free_irq(struct e1000_adapter *adapter) free_irq(adapter->pdev->irq, netdev); -#ifdef CONFIG_PCI_MSI if (adapter->have_msi) pci_disable_msi(adapter->pdev); -#endif } /** @@ -1334,7 +1325,10 @@ e1000_sw_init(struct e1000_adapter *adapter) spin_lock_init(&adapter->tx_queue_lock); #endif - atomic_set(&adapter->irq_sem, 1); + /* Explicitly disable IRQ since the NIC can be in any state. */ + atomic_set(&adapter->irq_sem, 0); + e1000_irq_disable(adapter); + spin_lock_init(&adapter->stats_lock); set_bit(__E1000_DOWN, &adapter->flags); @@ -3744,7 +3738,6 @@ e1000_update_stats(struct e1000_adapter *adapter) spin_unlock_irqrestore(&adapter->stats_lock, flags); } -#ifdef CONFIG_PCI_MSI /** * e1000_intr_msi - Interrupt Handler @@ -3810,7 +3803,6 @@ e1000_intr_msi(int irq, void *data) return IRQ_HANDLED; } -#endif /** * e1000_intr - Interrupt Handler diff --git a/drivers/net/ehea/ehea.h b/drivers/net/ehea/ehea.h index 602872dbe15fa4..e85a933a47625e 100644 --- a/drivers/net/ehea/ehea.h +++ b/drivers/net/ehea/ehea.h @@ -39,7 +39,7 @@ #include <asm/io.h> #define DRV_NAME "ehea" -#define DRV_VERSION "EHEA_0058" +#define DRV_VERSION "EHEA_0061" #define EHEA_MSG_DEFAULT (NETIF_MSG_LINK | NETIF_MSG_TIMER \ | NETIF_MSG_RX_ERR | NETIF_MSG_TX_ERR) diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c index f6e0cb1ada1ff6..152bb2016a2c94 100644 --- a/drivers/net/ehea/ehea_main.c +++ b/drivers/net/ehea/ehea_main.c @@ -428,7 +428,7 @@ static struct ehea_cqe *ehea_proc_rwqes(struct net_device *dev, } skb_copy_to_linear_data(skb, ((char*)cqe) + 64, cqe->num_bytes_transfered - 4); - ehea_fill_skb(dev, skb, cqe); + ehea_fill_skb(port->netdev, skb, cqe); } else if (rq == 2) { /* RQ2 */ skb = get_skb_by_index(skb_arr_rq2, skb_arr_rq2_len, cqe); diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index 7a018027fcc00a..4154fd00074674 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -195,7 +195,7 @@ enum { #define NVREG_IRQ_TX_FORCED 0x0100 #define NVREG_IRQ_RECOVER_ERROR 0x8000 #define NVREG_IRQMASK_THROUGHPUT 0x00df -#define NVREG_IRQMASK_CPU 0x0040 +#define NVREG_IRQMASK_CPU 0x0060 #define NVREG_IRQ_TX_ALL (NVREG_IRQ_TX_ERR|NVREG_IRQ_TX_OK|NVREG_IRQ_TX_FORCED) #define NVREG_IRQ_RX_ALL (NVREG_IRQ_RX_ERROR|NVREG_IRQ_RX|NVREG_IRQ_RX_NOBUF|NVREG_IRQ_RX_FORCED) #define NVREG_IRQ_OTHER (NVREG_IRQ_TIMER|NVREG_IRQ_LINK|NVREG_IRQ_RECOVER_ERROR) diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index b666a0cc064252..f5b3cba23fc5e4 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -1025,6 +1025,15 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev) dev->trans_start = jiffies; + /* The powerpc-specific eieio() is used, as wmb() has too strong + * semantics (it requires synchronization between cacheable and + * uncacheable mappings, which eieio doesn't provide and which we + * don't need), thus requiring a more expensive sync instruction. At + * some point, the set of architecture-independent barrier functions + * should be expanded to include weaker barriers. + */ + + eieio(); txbdp->status = status; /* If this was the last BD in the ring, the next one */ @@ -1301,6 +1310,7 @@ struct sk_buff * gfar_new_skb(struct net_device *dev, struct rxbd8 *bdp) bdp->length = 0; /* Mark the buffer empty */ + eieio(); bdp->status |= (RXBD_EMPTY | RXBD_INTERRUPT); return skb; @@ -1484,6 +1494,7 @@ int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit) bdp = priv->cur_rx; while (!((bdp->status & RXBD_EMPTY) || (--rx_work_limit < 0))) { + rmb(); skb = priv->rx_skbuff[priv->skb_currx]; if (!(bdp->status & diff --git a/drivers/net/ibm_emac/ibm_emac_core.c b/drivers/net/ibm_emac/ibm_emac_core.c index 50035ebd4f5218..f752e5fc65ba31 100644 --- a/drivers/net/ibm_emac/ibm_emac_core.c +++ b/drivers/net/ibm_emac/ibm_emac_core.c @@ -926,7 +926,7 @@ static int emac_link_differs(struct ocp_enet_private *dev) int duplex = r & EMAC_MR1_FDE ? DUPLEX_FULL : DUPLEX_HALF; int speed, pause, asym_pause; - if (r & (EMAC_MR1_MF_1000 | EMAC_MR1_MF_1000GPCS)) + if (r & EMAC_MR1_MF_1000) speed = SPEED_1000; else if (r & EMAC_MR1_MF_100) speed = SPEED_100; diff --git a/drivers/net/ibm_emac/ibm_emac_mal.c b/drivers/net/ibm_emac/ibm_emac_mal.c index 6c0f071e405206..cabd9846a5ee55 100644 --- a/drivers/net/ibm_emac/ibm_emac_mal.c +++ b/drivers/net/ibm_emac/ibm_emac_mal.c @@ -59,8 +59,7 @@ int __init mal_register_commac(struct ibm_ocp_mal *mal, return 0; } -void __exit mal_unregister_commac(struct ibm_ocp_mal *mal, - struct mal_commac *commac) +void mal_unregister_commac(struct ibm_ocp_mal *mal, struct mal_commac *commac) { unsigned long flags; local_irq_save(flags); diff --git a/drivers/net/ibm_emac/ibm_emac_mal.h b/drivers/net/ibm_emac/ibm_emac_mal.h index 407d2acbf7c79c..64bc338acc6c9c 100644 --- a/drivers/net/ibm_emac/ibm_emac_mal.h +++ b/drivers/net/ibm_emac/ibm_emac_mal.h @@ -223,8 +223,7 @@ void mal_exit(void) __exit; int mal_register_commac(struct ibm_ocp_mal *mal, struct mal_commac *commac) __init; -void mal_unregister_commac(struct ibm_ocp_mal *mal, - struct mal_commac *commac) __exit; +void mal_unregister_commac(struct ibm_ocp_mal *mal, struct mal_commac *commac); int mal_set_rcbs(struct ibm_ocp_mal *mal, int channel, unsigned long size); /* Returns BD ring offset for a particular channel diff --git a/drivers/net/ibm_emac/ibm_emac_phy.c b/drivers/net/ibm_emac/ibm_emac_phy.c index 9074f76ee2bf2f..e57862b34caef7 100644 --- a/drivers/net/ibm_emac/ibm_emac_phy.c +++ b/drivers/net/ibm_emac/ibm_emac_phy.c @@ -22,6 +22,7 @@ #include <asm/ocp.h> +#include "ibm_emac_core.h" #include "ibm_emac_phy.h" static inline int phy_read(struct mii_phy *phy, int reg) @@ -34,11 +35,39 @@ static inline void phy_write(struct mii_phy *phy, int reg, int val) phy->mdio_write(phy->dev, phy->address, reg, val); } -int mii_reset_phy(struct mii_phy *phy) +/* + * polls MII_BMCR until BMCR_RESET bit clears or operation times out. + * + * returns: + * >= 0 => success, value in BMCR returned to caller + * -EBUSY => failure, RESET bit never cleared + * otherwise => failure, lower level PHY read failed + */ +static int mii_spin_reset_complete(struct mii_phy *phy) { int val; int limit = 10000; + while (limit--) { + val = phy_read(phy, MII_BMCR); + if (val >= 0 && !(val & BMCR_RESET)) + return val; /* success */ + udelay(10); + } + if (val & BMCR_RESET) + val = -EBUSY; + + if (net_ratelimit()) + printk(KERN_ERR "emac%d: PHY reset timeout (%d)\n", + ((struct ocp_enet_private *)phy->dev->priv)->def->index, + val); + return val; +} + +int mii_reset_phy(struct mii_phy *phy) +{ + int val; + val = phy_read(phy, MII_BMCR); val &= ~BMCR_ISOLATE; val |= BMCR_RESET; @@ -46,16 +75,11 @@ int mii_reset_phy(struct mii_phy *phy) udelay(300); - while (limit--) { - val = phy_read(phy, MII_BMCR); - if (val >= 0 && (val & BMCR_RESET) == 0) - break; - udelay(10); - } - if ((val & BMCR_ISOLATE) && limit > 0) + val = mii_spin_reset_complete(phy); + if (val >= 0 && (val & BMCR_ISOLATE)) phy_write(phy, MII_BMCR, val & ~BMCR_ISOLATE); - return limit <= 0; + return val < 0; } static int genmii_setup_aneg(struct mii_phy *phy, u32 advertise) @@ -102,8 +126,14 @@ static int genmii_setup_aneg(struct mii_phy *phy, u32 advertise) } /* Start/Restart aneg */ - ctl = phy_read(phy, MII_BMCR); - ctl |= (BMCR_ANENABLE | BMCR_ANRESTART); + /* on some PHYs (e.g. National DP83843) a write to MII_ADVERTISE + * causes BMCR_RESET to be set on the next read of MII_BMCR, which + * if not checked for causes the PHY to be reset below */ + ctl = mii_spin_reset_complete(phy); + if (ctl < 0) + return ctl; + + ctl |= BMCR_ANENABLE | BMCR_ANRESTART; phy_write(phy, MII_BMCR, ctl); return 0; @@ -118,13 +148,13 @@ static int genmii_setup_forced(struct mii_phy *phy, int speed, int fd) phy->duplex = fd; phy->pause = phy->asym_pause = 0; + /* First reset the PHY */ + mii_reset_phy(phy); + ctl = phy_read(phy, MII_BMCR); if (ctl < 0) return ctl; - ctl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_ANENABLE); - - /* First reset the PHY */ - phy_write(phy, MII_BMCR, ctl | BMCR_RESET); + ctl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_ANENABLE | BMCR_SPEED1000); /* Select speed & duplex */ switch (speed) { diff --git a/drivers/net/ibm_emac/ibm_emac_rgmii.c b/drivers/net/ibm_emac/ibm_emac_rgmii.c index 53d281cb9a16a3..9dbb5e5936c3ea 100644 --- a/drivers/net/ibm_emac/ibm_emac_rgmii.c +++ b/drivers/net/ibm_emac/ibm_emac_rgmii.c @@ -162,7 +162,7 @@ void rgmii_set_speed(struct ocp_device *ocpdev, int input, int speed) out_be32(&dev->base->ssr, ssr); } -void __exit __rgmii_fini(struct ocp_device *ocpdev, int input) +void __rgmii_fini(struct ocp_device *ocpdev, int input) { struct ibm_ocp_rgmii *dev = ocp_get_drvdata(ocpdev); BUG_ON(!dev || dev->users == 0); diff --git a/drivers/net/ibm_emac/ibm_emac_rgmii.h b/drivers/net/ibm_emac/ibm_emac_rgmii.h index 117ea486c2ca9b..971e45815c6c4b 100644 --- a/drivers/net/ibm_emac/ibm_emac_rgmii.h +++ b/drivers/net/ibm_emac/ibm_emac_rgmii.h @@ -37,7 +37,7 @@ struct ibm_ocp_rgmii { #ifdef CONFIG_IBM_EMAC_RGMII int rgmii_attach(void *emac) __init; -void __rgmii_fini(struct ocp_device *ocpdev, int input) __exit; +void __rgmii_fini(struct ocp_device *ocpdev, int input); static inline void rgmii_fini(struct ocp_device *ocpdev, int input) { if (ocpdev) diff --git a/drivers/net/ibm_emac/ibm_emac_tah.c b/drivers/net/ibm_emac/ibm_emac_tah.c index e287b451bb44f6..3c2d5ba522a173 100644 --- a/drivers/net/ibm_emac/ibm_emac_tah.c +++ b/drivers/net/ibm_emac/ibm_emac_tah.c @@ -63,7 +63,7 @@ int __init tah_attach(void *emac) return 0; } -void __exit __tah_fini(struct ocp_device *ocpdev) +void __tah_fini(struct ocp_device *ocpdev) { struct tah_regs *p = ocp_get_drvdata(ocpdev); BUG_ON(!p); diff --git a/drivers/net/ibm_emac/ibm_emac_tah.h b/drivers/net/ibm_emac/ibm_emac_tah.h index 38153945a2402d..ccf64915e1e48b 100644 --- a/drivers/net/ibm_emac/ibm_emac_tah.h +++ b/drivers/net/ibm_emac/ibm_emac_tah.h @@ -55,7 +55,7 @@ struct tah_regs { #ifdef CONFIG_IBM_EMAC_TAH int tah_attach(void *emac) __init; -void __tah_fini(struct ocp_device *ocpdev) __exit; +void __tah_fini(struct ocp_device *ocpdev); static inline void tah_fini(struct ocp_device *ocpdev) { if (ocpdev) diff --git a/drivers/net/ibm_emac/ibm_emac_zmii.c b/drivers/net/ibm_emac/ibm_emac_zmii.c index 37dc8f34286888..2c0fdb0cabff4b 100644 --- a/drivers/net/ibm_emac/ibm_emac_zmii.c +++ b/drivers/net/ibm_emac/ibm_emac_zmii.c @@ -215,7 +215,7 @@ void __zmii_set_speed(struct ocp_device *ocpdev, int input, int speed) out_be32(&dev->base->ssr, ssr); } -void __exit __zmii_fini(struct ocp_device *ocpdev, int input) +void __zmii_fini(struct ocp_device *ocpdev, int input) { struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev); BUG_ON(!dev || dev->users == 0); diff --git a/drivers/net/ibm_emac/ibm_emac_zmii.h b/drivers/net/ibm_emac/ibm_emac_zmii.h index 972e3a44a09ffe..fad6d8bf983a2f 100644 --- a/drivers/net/ibm_emac/ibm_emac_zmii.h +++ b/drivers/net/ibm_emac/ibm_emac_zmii.h @@ -40,7 +40,7 @@ struct ibm_ocp_zmii { #ifdef CONFIG_IBM_EMAC_ZMII int zmii_attach(void *emac) __init; -void __zmii_fini(struct ocp_device *ocpdev, int input) __exit; +void __zmii_fini(struct ocp_device *ocpdev, int input); static inline void zmii_fini(struct ocp_device *ocpdev, int input) { if (ocpdev) diff --git a/drivers/net/ixgb/ixgb.h b/drivers/net/ixgb/ixgb.h index c8e90861f8694c..3569d5b0338868 100644 --- a/drivers/net/ixgb/ixgb.h +++ b/drivers/net/ixgb/ixgb.h @@ -193,8 +193,6 @@ struct ixgb_adapter { u16 msg_enable; struct ixgb_hw_stats stats; uint32_t alloc_rx_buff_failed; -#ifdef CONFIG_PCI_MSI boolean_t have_msi; -#endif }; #endif /* _IXGB_H_ */ diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ixgb/ixgb_main.c index 6d2b059371f10b..991c8833e23c95 100644 --- a/drivers/net/ixgb/ixgb_main.c +++ b/drivers/net/ixgb/ixgb_main.c @@ -227,7 +227,7 @@ int ixgb_up(struct ixgb_adapter *adapter) { struct net_device *netdev = adapter->netdev; - int err; + int err, irq_flags = IRQF_SHARED; int max_frame = netdev->mtu + ENET_HEADER_SIZE + ENET_FCS_LENGTH; struct ixgb_hw *hw = &adapter->hw; @@ -246,26 +246,21 @@ ixgb_up(struct ixgb_adapter *adapter) /* disable interrupts and get the hardware into a known state */ IXGB_WRITE_REG(&adapter->hw, IMC, 0xffffffff); -#ifdef CONFIG_PCI_MSI - { - boolean_t pcix = (IXGB_READ_REG(&adapter->hw, STATUS) & - IXGB_STATUS_PCIX_MODE) ? TRUE : FALSE; - adapter->have_msi = TRUE; - - if (!pcix) - adapter->have_msi = FALSE; - else if((err = pci_enable_msi(adapter->pdev))) { - DPRINTK(PROBE, ERR, - "Unable to allocate MSI interrupt Error: %d\n", err); - adapter->have_msi = FALSE; + /* only enable MSI if bus is in PCI-X mode */ + if (IXGB_READ_REG(&adapter->hw, STATUS) & IXGB_STATUS_PCIX_MODE) { + err = pci_enable_msi(adapter->pdev); + if (!err) { + adapter->have_msi = 1; + irq_flags = 0; + } /* proceed to try to request regular interrupt */ } - } -#endif - if((err = request_irq(adapter->pdev->irq, &ixgb_intr, - IRQF_SHARED | IRQF_SAMPLE_RANDOM, - netdev->name, netdev))) { + err = request_irq(adapter->pdev->irq, &ixgb_intr, irq_flags, + netdev->name, netdev); + if (err) { + if (adapter->have_msi) + pci_disable_msi(adapter->pdev); DPRINTK(PROBE, ERR, "Unable to allocate interrupt Error: %d\n", err); return err; @@ -307,11 +302,10 @@ ixgb_down(struct ixgb_adapter *adapter, boolean_t kill_watchdog) ixgb_irq_disable(adapter); free_irq(adapter->pdev->irq, netdev); -#ifdef CONFIG_PCI_MSI - if(adapter->have_msi == TRUE) + + if (adapter->have_msi) pci_disable_msi(adapter->pdev); -#endif if(kill_watchdog) del_timer_sync(&adapter->watchdog_timer); #ifdef CONFIG_IXGB_NAPI diff --git a/drivers/net/meth.c b/drivers/net/meth.c index 0343ea12b29963..92b403bf38b0f4 100644 --- a/drivers/net/meth.c +++ b/drivers/net/meth.c @@ -8,15 +8,16 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ -#include <linux/module.h> -#include <linux/init.h> - -#include <linux/kernel.h> /* printk() */ #include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> #include <linux/slab.h> -#include <linux/errno.h> /* error codes */ -#include <linux/types.h> /* size_t */ -#include <linux/interrupt.h> /* mark_bh */ +#include <linux/errno.h> +#include <linux/types.h> +#include <linux/interrupt.h> #include <linux/in.h> #include <linux/in6.h> @@ -33,7 +34,6 @@ #include <asm/io.h> #include <asm/scatterlist.h> -#include <linux/dma-mapping.h> #include "meth.h" @@ -51,8 +51,6 @@ static const char *meth_str="SGI O2 Fast Ethernet"; -MODULE_AUTHOR("Ilya Volynets <ilya@theIlya.com>"); -MODULE_DESCRIPTION("SGI O2 Builtin Fast Ethernet driver"); #define HAVE_TX_TIMEOUT /* The maximum time waited (in jiffies) before assuming a Tx failed. (400ms) */ @@ -784,15 +782,15 @@ static struct net_device_stats *meth_stats(struct net_device *dev) /* * The init function. */ -static struct net_device *meth_init(void) +static int __init meth_probe(struct platform_device *pdev) { struct net_device *dev; struct meth_private *priv; - int ret; + int err; dev = alloc_etherdev(sizeof(struct meth_private)); if (!dev) - return ERR_PTR(-ENOMEM); + return -ENOMEM; dev->open = meth_open; dev->stop = meth_release; @@ -808,11 +806,12 @@ static struct net_device *meth_init(void) priv = netdev_priv(dev); spin_lock_init(&priv->meth_lock); + SET_NETDEV_DEV(dev, &pdev->dev); - ret = register_netdev(dev); - if (ret) { + err = register_netdev(dev); + if (err) { free_netdev(dev); - return ERR_PTR(ret); + return err; } printk(KERN_INFO "%s: SGI MACE Ethernet rev. %d\n", @@ -820,21 +819,44 @@ static struct net_device *meth_init(void) return 0; } -static struct net_device *meth_dev; +static int __exit meth_remove(struct platform_device *pdev) +{ + struct net_device *dev = platform_get_drvdata(pdev); + + unregister_netdev(dev); + free_netdev(dev); + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static struct platform_driver meth_driver = { + .probe = meth_probe, + .remove = __devexit_p(meth_remove), + .driver = { + .name = "meth", + } +}; static int __init meth_init_module(void) { - meth_dev = meth_init(); - if (IS_ERR(meth_dev)) - return PTR_ERR(meth_dev); - return 0; + int err; + + err = platform_driver_register(&meth_driver); + if (err) + printk(KERN_ERR "Driver registration failed\n"); + + return err; } static void __exit meth_exit_module(void) { - unregister_netdev(meth_dev); - free_netdev(meth_dev); + platform_driver_unregister(&meth_driver); } module_init(meth_init_module); module_exit(meth_exit_module); + +MODULE_AUTHOR("Ilya Volynets <ilya@theIlya.com>"); +MODULE_DESCRIPTION("SGI O2 Builtin Fast Ethernet driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/mlx4/alloc.c b/drivers/net/mlx4/alloc.c index dfbd5809d7444a..f8d63d39f59246 100644 --- a/drivers/net/mlx4/alloc.c +++ b/drivers/net/mlx4/alloc.c @@ -51,8 +51,8 @@ u32 mlx4_bitmap_alloc(struct mlx4_bitmap *bitmap) if (obj < bitmap->max) { set_bit(obj, bitmap->table); + bitmap->last = (obj + 1) & (bitmap->max - 1); obj |= bitmap->top; - bitmap->last = obj + 1; } else obj = -1; diff --git a/drivers/net/mlx4/fw.c b/drivers/net/mlx4/fw.c index c4271731366395..cfa5cc07233973 100644 --- a/drivers/net/mlx4/fw.c +++ b/drivers/net/mlx4/fw.c @@ -90,7 +90,7 @@ static void dump_dev_cap_flags(struct mlx4_dev *dev, u32 flags) int i; mlx4_dbg(dev, "DEV_CAP flags:\n"); - for (i = 0; i < 32; ++i) + for (i = 0; i < ARRAY_SIZE(fname); ++i) if (fname[i] && (flags & (1 << i))) mlx4_dbg(dev, " %s\n", fname[i]); } diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c index cf0e96adfe4449..a3689245776132 100644 --- a/drivers/net/netxen/netxen_nic_init.c +++ b/drivers/net/netxen/netxen_nic_init.c @@ -1216,7 +1216,7 @@ u32 netxen_process_rcv_ring(struct netxen_adapter *adapter, int ctxid, int max) /* Window = 1 */ writel(consumer, NETXEN_CRB_NORMALIZE(adapter, - recv_crb_registers[ctxid]. + recv_crb_registers[adapter->portnum]. crb_rcv_status_consumer)); } diff --git a/drivers/net/phy/fixed.c b/drivers/net/phy/fixed.c index 68c99b4c525553..bb966911a137a0 100644 --- a/drivers/net/phy/fixed.c +++ b/drivers/net/phy/fixed.c @@ -89,6 +89,7 @@ EXPORT_SYMBOL(fixed_mdio_set_link_update); /*----------------------------------------------------------------------------- * This is used for updating internal mii regs from the status *-----------------------------------------------------------------------------*/ +#if defined(CONFIG_FIXED_MII_100_FDX) || defined(CONFIG_FIXED_MII_10_FDX) static int fixed_mdio_update_regs(struct fixed_info *fixed) { u16 *regs = fixed->regs; @@ -165,6 +166,7 @@ static int fixed_mii_reset(struct mii_bus *bus) /*nothing here - no way/need to reset it*/ return 0; } +#endif static int fixed_config_aneg(struct phy_device *phydev) { @@ -194,6 +196,7 @@ static struct phy_driver fixed_mdio_driver = { * number is used to create multiple fixed PHYs, so that several devices can * utilize them simultaneously. *-----------------------------------------------------------------------------*/ +#if defined(CONFIG_FIXED_MII_100_FDX) || defined(CONFIG_FIXED_MII_10_FDX) static int fixed_mdio_register_device(int number, int speed, int duplex) { struct mii_bus *new_bus; @@ -301,6 +304,7 @@ device_create_fail: return err; } +#endif MODULE_DESCRIPTION("Fixed PHY device & driver for PAL"); diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 104e20456e6f4b..adfbe81693a607 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -40,7 +40,6 @@ #include <linux/if_vlan.h> #include <linux/prefetch.h> #include <linux/mii.h> -#include <linux/dmi.h> #include <asm/irq.h> @@ -151,8 +150,6 @@ static const char *yukon2_name[] = { "FE", /* 0xb7 */ }; -static int dmi_blacklisted; - /* Access to external PHY */ static int gm_phy_write(struct sky2_hw *hw, unsigned port, u16 reg, u16 val) { @@ -307,10 +304,13 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) PHY_M_EC_MAC_S_MSK); ectrl |= PHY_M_EC_MAC_S(MAC_TX_CLK_25_MHZ); + /* on PHY 88E1040 Rev.D0 (and newer) downshift control changed */ if (hw->chip_id == CHIP_ID_YUKON_EC) + /* set downshift counter to 3x and enable downshift */ ectrl |= PHY_M_EC_DSC_2(2) | PHY_M_EC_DOWN_S_ENA; else - ectrl |= PHY_M_EC_M_DSC(2) | PHY_M_EC_S_DSC(3); + /* set master & slave downshift counter to 1x */ + ectrl |= PHY_M_EC_M_DSC(0) | PHY_M_EC_S_DSC(1); gm_phy_write(hw, port, PHY_MARV_EXT_CTRL, ectrl); } @@ -327,10 +327,12 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) /* enable automatic crossover */ ctrl |= PHY_M_PC_MDI_XMODE(PHY_M_PC_ENA_AUTO); + /* downshift on PHY 88E1112 and 88E1149 is changed */ if (sky2->autoneg == AUTONEG_ENABLE && (hw->chip_id == CHIP_ID_YUKON_XL || hw->chip_id == CHIP_ID_YUKON_EC_U || hw->chip_id == CHIP_ID_YUKON_EX)) { + /* set downshift counter to 3x and enable downshift */ ctrl &= ~PHY_M_PC_DSC_MSK; ctrl |= PHY_M_PC_DSC(2) | PHY_M_PC_DOWN_S_ENA; } @@ -362,7 +364,7 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) /* for SFP-module set SIGDET polarity to low */ ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL); ctrl |= PHY_M_FIB_SIGD_POL; - gm_phy_write(hw, port, PHY_MARV_CTRL, ctrl); + gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl); } gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg); @@ -656,7 +658,7 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port) const u8 *addr = hw->dev[port]->dev_addr; sky2_write32(hw, SK_REG(port, GPHY_CTRL), GPC_RST_SET); - sky2_write32(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR|GPC_ENA_PAUSE); + sky2_write32(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR); sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_CLR); @@ -842,10 +844,12 @@ static inline struct tx_ring_info *tx_le_re(struct sky2_port *sky2, /* Update chip's next pointer */ static inline void sky2_put_idx(struct sky2_hw *hw, unsigned q, u16 idx) { - q = Y2_QADDR(q, PREF_UNIT_PUT_IDX); + /* Make sure write' to descriptors are complete before we tell hardware */ wmb(); - sky2_write16(hw, q, idx); - sky2_read16(hw, q); + sky2_write16(hw, Y2_QADDR(q, PREF_UNIT_PUT_IDX), idx); + + /* Synchronize I/O on since next processor may write to tail */ + mmiowb(); } @@ -977,6 +981,7 @@ stopped: /* reset the Rx prefetch unit */ sky2_write32(hw, Y2_QADDR(rxq, PREF_UNIT_CTRL), PREF_UNIT_RST_SET); + mmiowb(); } /* Clean out receive buffer area, assumes receiver hardware stopped */ @@ -1196,7 +1201,7 @@ static int sky2_rx_start(struct sky2_port *sky2) } /* Tell chip about available buffers */ - sky2_write16(hw, Y2_QADDR(rxq, PREF_UNIT_PUT_IDX), sky2->rx_put); + sky2_put_idx(hw, rxq, sky2->rx_put); return 0; nomem: sky2_rx_clean(sky2); @@ -1427,7 +1432,7 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev) tcpsum = offset << 16; /* sum start */ tcpsum |= offset + skb->csum_offset; /* sum write */ - ctrl = CALSUM | WR_SUM | INIT_SUM | LOCK_SUM; + ctrl |= CALSUM | WR_SUM | INIT_SUM | LOCK_SUM; if (ip_hdr(skb)->protocol == IPPROTO_UDP) ctrl |= UDPTCP; @@ -1538,6 +1543,8 @@ static void sky2_tx_complete(struct sky2_port *sky2, u16 done) } sky2->tx_cons = idx; + smp_mb(); + if (tx_avail(sky2) > MAX_SKB_TX_LE + 4) netif_wake_queue(dev); } @@ -1577,13 +1584,6 @@ static int sky2_down(struct net_device *dev) imask &= ~portirq_msk[port]; sky2_write32(hw, B0_IMSK, imask); - /* - * Both ports share the NAPI poll on port 0, so if necessary undo the - * the disable that is done in dev_close. - */ - if (sky2->port == 0 && hw->ports > 1) - netif_poll_enable(dev); - sky2_gmac_reset(hw, port); /* Stop transmitter */ @@ -2139,8 +2139,10 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do) switch (le->opcode & ~HW_OWNER) { case OP_RXSTAT: skb = sky2_receive(dev, length, status); - if (!skb) + if (unlikely(!skb)) { + sky2->net_stats.rx_dropped++; goto force_update; + } skb->protocol = eth_type_trans(skb, dev); sky2->net_stats.rx_packets++; @@ -2221,6 +2223,7 @@ force_update: /* Fully processed status ring so clear irq */ sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ); + mmiowb(); exit_loop: if (buf_write[0]) { @@ -2341,6 +2344,12 @@ static void sky2_mac_intr(struct sky2_hw *hw, unsigned port) printk(KERN_INFO PFX "%s: mac interrupt status 0x%x\n", dev->name, status); + if (status & GM_IS_RX_CO_OV) + gma_read16(hw, port, GM_RX_IRQ_SRC); + + if (status & GM_IS_TX_CO_OV) + gma_read16(hw, port, GM_TX_IRQ_SRC); + if (status & GM_IS_RX_FF_OR) { ++sky2->net_stats.rx_fifo_errors; sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_CLI_RX_FO); @@ -2439,6 +2448,7 @@ static int sky2_poll(struct net_device *dev0, int *budget) if (work_done < work_limit) { netif_rx_complete(dev0); + /* end of interrupt, re-enables also acts as I/O synchronization */ sky2_read32(hw, B0_Y2_SP_LISR); return 0; } else { @@ -2534,17 +2544,6 @@ static int __devinit sky2_init(struct sky2_hw *hw) return -EOPNOTSUPP; } - - /* Some Gigabyte motherboards have 88e8056 but cause problems - * There is some unresolved hardware related problem that causes - * descriptor errors and receive data corruption. - */ - if (hw->chip_id == CHIP_ID_YUKON_EC_U && dmi_blacklisted) { - dev_err(&hw->pdev->dev, - "88E8056 on this motherboard not supported\n"); - return -EOPNOTSUPP; - } - hw->pmd_type = sky2_read8(hw, B2_PMD_TYP); hw->ports = 1; t8 = sky2_read8(hw, B2_Y2_HW_RES); @@ -3910,24 +3909,8 @@ static struct pci_driver sky2_driver = { .shutdown = sky2_shutdown, }; -static struct dmi_system_id __initdata broken_dmi_table[] = { - { - .ident = "Gigabyte 965P-S3", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Gigabyte Technology Co., Ltd."), - DMI_MATCH(DMI_PRODUCT_NAME, "965P-S3"), - - }, - }, - { } -}; - static int __init sky2_init_module(void) { - /* Look for sick motherboards */ - if (dmi_check_system(broken_dmi_table)) - dmi_blacklisted = 1; - return pci_register_driver(&sky2_driver); } diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h index 5efb5afc45baa0..b8c4a3b5eadf98 100644 --- a/drivers/net/sky2.h +++ b/drivers/net/sky2.h @@ -1149,7 +1149,7 @@ enum { PHY_M_IS_JABBER = 1<<0, /* Jabber */ PHY_M_DEF_MSK = PHY_M_IS_LSP_CHANGE | PHY_M_IS_LST_CHANGE - | PHY_M_IS_FIFO_ERROR, + | PHY_M_IS_DUP_CHANGE, PHY_M_AN_MSK = PHY_M_IS_AN_ERROR | PHY_M_IS_AN_COMPL, }; @@ -1732,28 +1732,6 @@ enum { /* GPHY_CTRL 32 bit GPHY Control Reg (YUKON only) */ enum { - GPC_SEL_BDT = 1<<28, /* Select Bi-Dir. Transfer for MDC/MDIO */ - GPC_INT_POL_HI = 1<<27, /* IRQ Polarity is Active HIGH */ - GPC_75_OHM = 1<<26, /* Use 75 Ohm Termination instead of 50 */ - GPC_DIS_FC = 1<<25, /* Disable Automatic Fiber/Copper Detection */ - GPC_DIS_SLEEP = 1<<24, /* Disable Energy Detect */ - GPC_HWCFG_M_3 = 1<<23, /* HWCFG_MODE[3] */ - GPC_HWCFG_M_2 = 1<<22, /* HWCFG_MODE[2] */ - GPC_HWCFG_M_1 = 1<<21, /* HWCFG_MODE[1] */ - GPC_HWCFG_M_0 = 1<<20, /* HWCFG_MODE[0] */ - GPC_ANEG_0 = 1<<19, /* ANEG[0] */ - GPC_ENA_XC = 1<<18, /* Enable MDI crossover */ - GPC_DIS_125 = 1<<17, /* Disable 125 MHz clock */ - GPC_ANEG_3 = 1<<16, /* ANEG[3] */ - GPC_ANEG_2 = 1<<15, /* ANEG[2] */ - GPC_ANEG_1 = 1<<14, /* ANEG[1] */ - GPC_ENA_PAUSE = 1<<13, /* Enable Pause (SYM_OR_REM) */ - GPC_PHYADDR_4 = 1<<12, /* Bit 4 of Phy Addr */ - GPC_PHYADDR_3 = 1<<11, /* Bit 3 of Phy Addr */ - GPC_PHYADDR_2 = 1<<10, /* Bit 2 of Phy Addr */ - GPC_PHYADDR_1 = 1<<9, /* Bit 1 of Phy Addr */ - GPC_PHYADDR_0 = 1<<8, /* Bit 0 of Phy Addr */ - /* Bits 7..2: reserved */ GPC_RST_CLR = 1<<1, /* Clear GPHY Reset */ GPC_RST_SET = 1<<0, /* Set GPHY Reset */ }; diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c index 108adbf5b5ebf3..ef84d7c757a080 100644 --- a/drivers/net/spider_net.c +++ b/drivers/net/spider_net.c @@ -430,7 +430,8 @@ spider_net_prepare_rx_descr(struct spider_net_card *card, /* and we need to have it 128 byte aligned, therefore we allocate a * bit more */ /* allocate an skb */ - descr->skb = dev_alloc_skb(bufsize + SPIDER_NET_RXBUF_ALIGN - 1); + descr->skb = netdev_alloc_skb(card->netdev, + bufsize + SPIDER_NET_RXBUF_ALIGN - 1); if (!descr->skb) { if (netif_msg_rx_err(card) && net_ratelimit()) pr_err("Not enough memory to allocate rx buffer\n"); @@ -1013,12 +1014,12 @@ spider_net_pass_skb_up(struct spider_net_descr *descr, */ } - /* pass skb up to stack */ - netif_receive_skb(skb); - /* update netdevice statistics */ card->netdev_stats.rx_packets++; card->netdev_stats.rx_bytes += skb->len; + + /* pass skb up to stack */ + netif_receive_skb(skb); } #ifdef DEBUG diff --git a/drivers/net/tokenring/Kconfig b/drivers/net/tokenring/Kconfig index 99c4c1922f190f..e6b2e06493e79b 100644 --- a/drivers/net/tokenring/Kconfig +++ b/drivers/net/tokenring/Kconfig @@ -2,12 +2,10 @@ # Token Ring driver configuration # -menu "Token Ring devices" - depends on NETDEVICES && !UML - # So far, we only have PCI, ISA, and MCA token ring devices -config TR +menuconfig TR bool "Token Ring driver support" + depends on NETDEVICES && !UML depends on (PCI || ISA || MCA || CCW) select LLC help @@ -20,9 +18,11 @@ config TR from <http://www.tldp.org/docs.html#howto>. Most people can say N here. +if TR + config IBMTR tristate "IBM Tropic chipset based adapter support" - depends on TR && (ISA || MCA) + depends on ISA || MCA ---help--- This is support for all IBM Token Ring cards that don't use DMA. If you have such a beast, say Y and read the Token-Ring mini-HOWTO, @@ -36,7 +36,7 @@ config IBMTR config IBMOL tristate "IBM Olympic chipset PCI adapter support" - depends on TR && PCI + depends on PCI ---help--- This is support for all non-Lanstreamer IBM PCI Token Ring Cards. Specifically this is all IBM PCI, PCI Wake On Lan, PCI II, PCI II @@ -54,7 +54,7 @@ config IBMOL config IBMLS tristate "IBM Lanstreamer chipset PCI adapter support" - depends on TR && PCI && !64BIT + depends on PCI && !64BIT help This is support for IBM Lanstreamer PCI Token Ring Cards. @@ -66,7 +66,7 @@ config IBMLS config 3C359 tristate "3Com 3C359 Token Link Velocity XL adapter support" - depends on TR && PCI + depends on PCI ---help--- This is support for the 3Com PCI Velocity XL cards, specifically the 3Com 3C359, please note this is not for the 3C339 cards, you @@ -84,7 +84,7 @@ config 3C359 config TMS380TR tristate "Generic TMS380 Token Ring ISA/PCI adapter support" - depends on TR && (PCI || ISA && ISA_DMA_API || MCA) + depends on PCI || ISA && ISA_DMA_API || MCA select FW_LOADER ---help--- This driver provides generic support for token ring adapters @@ -108,7 +108,7 @@ config TMS380TR config TMSPCI tristate "Generic TMS380 PCI support" - depends on TR && TMS380TR && PCI + depends on TMS380TR && PCI ---help--- This tms380 module supports generic TMS380-based PCI cards. @@ -123,7 +123,7 @@ config TMSPCI config SKISA tristate "SysKonnect TR4/16 ISA support" - depends on TR && TMS380TR && ISA + depends on TMS380TR && ISA help This tms380 module supports SysKonnect TR4/16 ISA cards. @@ -135,7 +135,7 @@ config SKISA config PROTEON tristate "Proteon ISA support" - depends on TR && TMS380TR && ISA + depends on TMS380TR && ISA help This tms380 module supports Proteon ISA cards. @@ -148,7 +148,7 @@ config PROTEON config ABYSS tristate "Madge Smart 16/4 PCI Mk2 support" - depends on TR && TMS380TR && PCI + depends on TMS380TR && PCI help This tms380 module supports the Madge Smart 16/4 PCI Mk2 cards (51-02). @@ -158,7 +158,7 @@ config ABYSS config MADGEMC tristate "Madge Smart 16/4 Ringnode MicroChannel" - depends on TR && TMS380TR && MCA + depends on TMS380TR && MCA help This tms380 module supports the Madge Smart 16/4 MC16 and MC32 MicroChannel adapters. @@ -168,7 +168,7 @@ config MADGEMC config SMCTR tristate "SMC ISA/MCA adapter support" - depends on TR && (ISA || MCA_LEGACY) && (BROKEN || !64BIT) + depends on (ISA || MCA_LEGACY) && (BROKEN || !64BIT) ---help--- This is support for the ISA and MCA SMC Token Ring cards, specifically SMC TokenCard Elite (8115T) and SMC TokenCard Elite/A @@ -182,5 +182,4 @@ config SMCTR To compile this driver as a module, choose M here: the module will be called smctr. -endmenu - +endif # TR diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c index c2ccbd098f5387..18b731bb4da1a6 100644 --- a/drivers/net/ucc_geth.c +++ b/drivers/net/ucc_geth.c @@ -23,11 +23,8 @@ #include <linux/skbuff.h> #include <linux/spinlock.h> #include <linux/mm.h> -#include <linux/ethtool.h> -#include <linux/delay.h> #include <linux/dma-mapping.h> #include <linux/fsl_devices.h> -#include <linux/ethtool.h> #include <linux/mii.h> #include <linux/phy.h> #include <linux/workqueue.h> diff --git a/drivers/net/ucc_geth_mii.c b/drivers/net/ucc_geth_mii.c index f96966d4bcc2b5..7bcb82f50cf73b 100644 --- a/drivers/net/ucc_geth_mii.c +++ b/drivers/net/ucc_geth_mii.c @@ -260,8 +260,6 @@ static struct of_device_id uec_mdio_match[] = { {}, }; -MODULE_DEVICE_TABLE(of, uec_mdio_match); - static struct of_platform_driver uec_mdio_driver = { .name = DRV_NAME, .probe = uec_mdio_probe, diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c index d5ef97bc4d0169..6d95cacd5284de 100644 --- a/drivers/net/usb/asix.c +++ b/drivers/net/usb/asix.c @@ -1458,6 +1458,10 @@ static const struct usb_device_id products [] = { // IO-DATA ETG-US2 USB_DEVICE (0x04bb, 0x0930), .driver_info = (unsigned long) &ax88178_info, +}, { + // Belkin F5D5055 + USB_DEVICE(0x050d, 0x5055), + .driver_info = (unsigned long) &ax88178_info, }, { }, // END }; diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c index 5a21f06bf8a54f..675ac99a79c617 100644 --- a/drivers/net/usb/cdc_ether.c +++ b/drivers/net/usb/cdc_ether.c @@ -91,6 +91,22 @@ int usbnet_generic_cdc_bind(struct usbnet *dev, struct usb_interface *intf) "CDC descriptors on config\n"); } + /* Maybe CDC descriptors are after the endpoint? This bug has + * been seen on some 2Wire Inc RNDIS-ish products. + */ + if (len == 0) { + struct usb_host_endpoint *hep; + + hep = intf->cur_altsetting->endpoint; + if (hep) { + buf = hep->extra; + len = hep->extralen; + } + if (len) + dev_dbg(&intf->dev, + "CDC descriptors on endpoint\n"); + } + /* this assumes that if there's a non-RNDIS vendor variant * of cdc-acm, it'll fail RNDIS requests cleanly. */ diff --git a/drivers/net/usb/rndis_host.c b/drivers/net/usb/rndis_host.c index 980e4aaa97aaa9..cd991a0f75bb3e 100644 --- a/drivers/net/usb/rndis_host.c +++ b/drivers/net/usb/rndis_host.c @@ -515,6 +515,7 @@ static int rndis_bind(struct usbnet *dev, struct usb_interface *intf) dev_err(&intf->dev, "dev can't take %u byte packets (max %u)\n", dev->hard_mtu, tmp); + retval = -EINVAL; goto fail_and_release; } diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index f9cd42d058b042..5b16d9a1269a28 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -1252,20 +1252,23 @@ EXPORT_SYMBOL_GPL(usbnet_probe); /*-------------------------------------------------------------------------*/ -/* FIXME these suspend/resume methods assume non-CDC style - * devices, with only one interface. +/* + * suspend the whole driver as soon as the first interface is suspended + * resume only when the last interface is resumed */ int usbnet_suspend (struct usb_interface *intf, pm_message_t message) { struct usbnet *dev = usb_get_intfdata(intf); - /* accelerate emptying of the rx and queues, to avoid - * having everything error out. - */ - netif_device_detach (dev->net); - (void) unlink_urbs (dev, &dev->rxq); - (void) unlink_urbs (dev, &dev->txq); + if (!dev->suspend_count++) { + /* accelerate emptying of the rx and queues, to avoid + * having everything error out. + */ + netif_device_detach (dev->net); + (void) unlink_urbs (dev, &dev->rxq); + (void) unlink_urbs (dev, &dev->txq); + } return 0; } EXPORT_SYMBOL_GPL(usbnet_suspend); @@ -1274,8 +1277,10 @@ int usbnet_resume (struct usb_interface *intf) { struct usbnet *dev = usb_get_intfdata(intf); - netif_device_attach (dev->net); - tasklet_schedule (&dev->bh); + if (!--dev->suspend_count) { + netif_device_attach (dev->net); + tasklet_schedule (&dev->bh); + } return 0; } EXPORT_SYMBOL_GPL(usbnet_resume); diff --git a/drivers/net/usb/usbnet.h b/drivers/net/usb/usbnet.h index 82db5a8e528e57..a3f8b9e7bc0055 100644 --- a/drivers/net/usb/usbnet.h +++ b/drivers/net/usb/usbnet.h @@ -32,6 +32,7 @@ struct usbnet { const char *driver_name; wait_queue_head_t *wait; struct mutex phy_mutex; + unsigned char suspend_count; /* i/o info: pipes etc */ unsigned in, out; diff --git a/drivers/net/wireless/hostap/hostap_80211_tx.c b/drivers/net/wireless/hostap/hostap_80211_tx.c index 246fac0e80010b..3df3c60263d4ac 100644 --- a/drivers/net/wireless/hostap/hostap_80211_tx.c +++ b/drivers/net/wireless/hostap/hostap_80211_tx.c @@ -311,7 +311,7 @@ static struct sk_buff * hostap_tx_encrypt(struct sk_buff *skb, local_info_t *local; struct ieee80211_hdr_4addr *hdr; u16 fc; - int hdr_len, res; + int prefix_len, postfix_len, hdr_len, res; iface = netdev_priv(skb->dev); local = iface->local; @@ -337,10 +337,13 @@ static struct sk_buff * hostap_tx_encrypt(struct sk_buff *skb, if (skb == NULL) return NULL; - if ((skb_headroom(skb) < crypt->ops->extra_mpdu_prefix_len || - skb_tailroom(skb) < crypt->ops->extra_mpdu_postfix_len) && - pskb_expand_head(skb, crypt->ops->extra_mpdu_prefix_len, - crypt->ops->extra_mpdu_postfix_len, GFP_ATOMIC)) { + prefix_len = crypt->ops->extra_mpdu_prefix_len + + crypt->ops->extra_msdu_prefix_len; + postfix_len = crypt->ops->extra_mpdu_postfix_len + + crypt->ops->extra_msdu_postfix_len; + if ((skb_headroom(skb) < prefix_len || + skb_tailroom(skb) < postfix_len) && + pskb_expand_head(skb, prefix_len, postfix_len, GFP_ATOMIC)) { kfree_skb(skb); return NULL; } diff --git a/drivers/net/wireless/libertas/decl.h b/drivers/net/wireless/libertas/decl.h index 606bdd002be748..dfe27642322c9d 100644 --- a/drivers/net/wireless/libertas/decl.h +++ b/drivers/net/wireless/libertas/decl.h @@ -46,7 +46,7 @@ u32 libertas_index_to_data_rate(u8 index); u8 libertas_data_rate_to_index(u32 rate); void libertas_get_fwversion(wlan_adapter * adapter, char *fwversion, int maxlen); -int libertas_upload_rx_packet(wlan_private * priv, struct sk_buff *skb); +void libertas_upload_rx_packet(wlan_private * priv, struct sk_buff *skb); /** The proc fs interface */ int libertas_process_rx_command(wlan_private * priv); diff --git a/drivers/net/wireless/libertas/fw.c b/drivers/net/wireless/libertas/fw.c index 441123c85e62ce..5c63c9b1659c1e 100644 --- a/drivers/net/wireless/libertas/fw.c +++ b/drivers/net/wireless/libertas/fw.c @@ -333,18 +333,22 @@ static void command_timer_fn(unsigned long data) unsigned long flags; ptempnode = adapter->cur_cmd; + if (ptempnode == NULL) { + lbs_pr_debug(1, "PTempnode Empty\n"); + return; + } + cmd = (struct cmd_ds_command *)ptempnode->bufvirtualaddr; + if (!cmd) { + lbs_pr_debug(1, "cmd is NULL\n"); + return; + } lbs_pr_info("command_timer_fn fired (%x)\n", cmd->command); if (!adapter->fw_ready) return; - if (ptempnode == NULL) { - lbs_pr_debug(1, "PTempnode Empty\n"); - return; - } - spin_lock_irqsave(&adapter->driver_lock, flags); adapter->cur_cmd = NULL; spin_unlock_irqrestore(&adapter->driver_lock, flags); diff --git a/drivers/net/wireless/libertas/rx.c b/drivers/net/wireless/libertas/rx.c index d17924f764e573..96619a32951bc9 100644 --- a/drivers/net/wireless/libertas/rx.c +++ b/drivers/net/wireless/libertas/rx.c @@ -136,7 +136,7 @@ static void wlan_compute_rssi(wlan_private * priv, struct rxpd *p_rx_pd) LEAVE(); } -int libertas_upload_rx_packet(wlan_private * priv, struct sk_buff *skb) +void libertas_upload_rx_packet(wlan_private * priv, struct sk_buff *skb) { lbs_pr_debug(1, "skb->data=%p\n", skb->data); @@ -148,8 +148,6 @@ int libertas_upload_rx_packet(wlan_private * priv, struct sk_buff *skb) skb->ip_summed = CHECKSUM_UNNECESSARY; netif_rx(skb); - - return 0; } /** @@ -269,15 +267,11 @@ int libertas_process_rxed_packet(wlan_private * priv, struct sk_buff *skb) wlan_compute_rssi(priv, p_rx_pd); lbs_pr_debug(1, "RX Data: size of actual packet = %d\n", skb->len); - if (libertas_upload_rx_packet(priv, skb)) { - lbs_pr_debug(1, "RX error: libertas_upload_rx_packet" - " returns failure\n"); - ret = -1; - goto done; - } priv->stats.rx_bytes += skb->len; priv->stats.rx_packets++; + libertas_upload_rx_packet(priv, skb); + ret = 0; done: LEAVE(); @@ -438,22 +432,14 @@ static int process_rxed_802_11_packet(wlan_private * priv, struct sk_buff *skb) wlan_compute_rssi(priv, prxpd); lbs_pr_debug(1, "RX Data: size of actual packet = %d\n", skb->len); - - if (libertas_upload_rx_packet(priv, skb)) { - lbs_pr_debug(1, "RX error: libertas_upload_rx_packet " - "returns failure\n"); - ret = -1; - goto done; - } - priv->stats.rx_bytes += skb->len; priv->stats.rx_packets++; + libertas_upload_rx_packet(priv, skb); + ret = 0; done: LEAVE(); - skb->protocol = __constant_htons(0x0019); /* ETH_P_80211_RAW */ - return (ret); } diff --git a/drivers/net/wireless/prism54/islpci_eth.c b/drivers/net/wireless/prism54/islpci_eth.c index dd070cccf324a8..f49eb068c7d0ce 100644 --- a/drivers/net/wireless/prism54/islpci_eth.c +++ b/drivers/net/wireless/prism54/islpci_eth.c @@ -378,9 +378,10 @@ islpci_eth_receive(islpci_private *priv) display_buffer((char *) skb->data, skb->len); #endif /* take care of monitor mode and spy monitoring. */ - if (unlikely(priv->iw_mode == IW_MODE_MONITOR)) + if (unlikely(priv->iw_mode == IW_MODE_MONITOR)) { + skb->dev = ndev; discard = islpci_monitor_rx(priv, &skb); - else { + } else { if (unlikely(skb->data[2 * ETH_ALEN] == 0)) { /* The packet has a rx_annex. Read it for spy monitoring, Then * remove it, while keeping the 2 leading MAC addr. diff --git a/drivers/oprofile/buffer_sync.c b/drivers/oprofile/buffer_sync.c index 78c2e6e4b42e25..edd6de9957260a 100644 --- a/drivers/oprofile/buffer_sync.c +++ b/drivers/oprofile/buffer_sync.c @@ -26,6 +26,7 @@ #include <linux/profile.h> #include <linux/module.h> #include <linux/fs.h> +#include <linux/sched.h> #include "oprofile_stats.h" #include "event_buffer.h" diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c index 02c0d52c9f76cb..7bfbad57879d31 100644 --- a/drivers/parport/parport_pc.c +++ b/drivers/parport/parport_pc.c @@ -51,6 +51,7 @@ #include <linux/ioport.h> #include <linux/kernel.h> #include <linux/slab.h> +#include <linux/dma-mapping.h> #include <linux/pci.h> #include <linux/pnp.h> #include <linux/platform_device.h> diff --git a/drivers/pci/hotplug/ibmphp_hpc.c b/drivers/pci/hotplug/ibmphp_hpc.c index 46abaa8c41f1f9..d06ccb69e411a0 100644 --- a/drivers/pci/hotplug/ibmphp_hpc.c +++ b/drivers/pci/hotplug/ibmphp_hpc.c @@ -34,6 +34,7 @@ #include <linux/pci.h> #include <linux/init.h> #include <linux/mutex.h> +#include <linux/sched.h> #include "ibmphp.h" diff --git a/drivers/pci/pcie/aer/aerdrv.h b/drivers/pci/pcie/aer/aerdrv.h index bf655dbaf8e25b..5cca394d59993b 100644 --- a/drivers/pci/pcie/aer/aerdrv.h +++ b/drivers/pci/pcie/aer/aerdrv.h @@ -8,6 +8,7 @@ #ifndef _AERDRV_H_ #define _AERDRV_H_ +#include <linux/workqueue.h> #include <linux/pcieport_if.h> #include <linux/aer.h> diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 95ce8f49e382a6..4e4c10a7fd3a28 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -59,7 +59,7 @@ comment "RTC interfaces" depends on RTC_CLASS config RTC_INTF_SYSFS - boolean "sysfs" + boolean "/sys/class/rtc/rtcN (sysfs)" depends on RTC_CLASS && SYSFS default RTC_CLASS help @@ -70,7 +70,7 @@ config RTC_INTF_SYSFS will be called rtc-sysfs. config RTC_INTF_PROC - boolean "proc" + boolean "/proc/driver/rtc (procfs for rtc0)" depends on RTC_CLASS && PROC_FS default RTC_CLASS help @@ -82,7 +82,7 @@ config RTC_INTF_PROC will be called rtc-proc. config RTC_INTF_DEV - boolean "dev" + boolean "/dev/rtcN (character devices)" depends on RTC_CLASS default RTC_CLASS help diff --git a/drivers/rtc/rtc-omap.c b/drivers/rtc/rtc-omap.c index 60a8a4bb8bd285..a2f84f1695887c 100644 --- a/drivers/rtc/rtc-omap.c +++ b/drivers/rtc/rtc-omap.c @@ -371,7 +371,7 @@ static int __devinit omap_rtc_probe(struct platform_device *pdev) goto fail; } platform_set_drvdata(pdev, rtc); - dev_set_devdata(&rtc->dev, mem); + dev_set_drvdata(&rtc->dev, mem); /* clear pending irqs, and set 1/second periodic, * which we'll use instead of update irqs @@ -453,7 +453,7 @@ static int __devexit omap_rtc_remove(struct platform_device *pdev) free_irq(omap_rtc_timer, rtc); free_irq(omap_rtc_alarm, rtc); - release_resource(dev_get_devdata(&rtc->dev)); + release_resource(dev_get_drvdata(&rtc->dev)); rtc_device_unregister(rtc); return 0; } diff --git a/drivers/s390/scsi/zfcp_aux.c b/drivers/s390/scsi/zfcp_aux.c index ddff40c4212c28..821cde65e3694e 100644 --- a/drivers/s390/scsi/zfcp_aux.c +++ b/drivers/s390/scsi/zfcp_aux.c @@ -1127,6 +1127,7 @@ zfcp_adapter_dequeue(struct zfcp_adapter *adapter) int retval = 0; unsigned long flags; + zfcp_adapter_scsi_unregister(adapter); device_unregister(&adapter->generic_services); zfcp_sysfs_adapter_remove_files(&adapter->ccw_device->dev); dev_set_drvdata(&adapter->ccw_device->dev, NULL); diff --git a/drivers/s390/scsi/zfcp_ccw.c b/drivers/s390/scsi/zfcp_ccw.c index 81680efa172138..1c8f71a59855b2 100644 --- a/drivers/s390/scsi/zfcp_ccw.c +++ b/drivers/s390/scsi/zfcp_ccw.c @@ -189,9 +189,7 @@ zfcp_ccw_set_online(struct ccw_device *ccw_device) * @ccw_device: pointer to belonging ccw device * * This function gets called by the common i/o layer and sets an adapter - * into state offline. Setting an fcp device offline means that it will be - * unregistered from the SCSI stack and that the adapter will be shut down - * asynchronously. + * into state offline. */ static int zfcp_ccw_set_offline(struct ccw_device *ccw_device) @@ -202,7 +200,6 @@ zfcp_ccw_set_offline(struct ccw_device *ccw_device) adapter = dev_get_drvdata(&ccw_device->dev); zfcp_erp_adapter_shutdown(adapter, 0); zfcp_erp_wait(adapter); - zfcp_adapter_scsi_unregister(adapter); zfcp_erp_thread_kill(adapter); zfcp_adapter_debug_unregister(adapter); up(&zfcp_data.config_sema); diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c index a8b02542ac2da3..0eb31e162b1596 100644 --- a/drivers/s390/scsi/zfcp_fsf.c +++ b/drivers/s390/scsi/zfcp_fsf.c @@ -156,44 +156,30 @@ zfcp_fsf_req_free(struct zfcp_fsf_req *fsf_req) kfree(fsf_req); } -/** - * zfcp_fsf_req_dismiss - dismiss a single fsf request - */ -static void zfcp_fsf_req_dismiss(struct zfcp_adapter *adapter, - struct zfcp_fsf_req *fsf_req, - unsigned int counter) -{ - u64 dbg_tmp[2]; - - dbg_tmp[0] = (u64) atomic_read(&adapter->reqs_active); - dbg_tmp[1] = (u64) counter; - debug_event(adapter->erp_dbf, 4, (void *) dbg_tmp, 16); - list_del(&fsf_req->list); - fsf_req->status |= ZFCP_STATUS_FSFREQ_DISMISSED; - zfcp_fsf_req_complete(fsf_req); -} - -/** - * zfcp_fsf_req_dismiss_all - dismiss all remaining fsf requests +/* + * Never ever call this without shutting down the adapter first. + * Otherwise the adapter would continue using and corrupting s390 storage. + * Included BUG_ON() call to ensure this is done. + * ERP is supposed to be the only user of this function. */ void zfcp_fsf_req_dismiss_all(struct zfcp_adapter *adapter) { - struct zfcp_fsf_req *request, *tmp; + struct zfcp_fsf_req *fsf_req, *tmp; unsigned long flags; LIST_HEAD(remove_queue); - unsigned int i, counter; + unsigned int i; + BUG_ON(atomic_test_mask(ZFCP_STATUS_ADAPTER_QDIOUP, &adapter->status)); spin_lock_irqsave(&adapter->req_list_lock, flags); atomic_set(&adapter->reqs_active, 0); - for (i=0; i<REQUEST_LIST_SIZE; i++) + for (i = 0; i < REQUEST_LIST_SIZE; i++) list_splice_init(&adapter->req_list[i], &remove_queue); - spin_unlock_irqrestore(&adapter->req_list_lock, flags); - counter = 0; - list_for_each_entry_safe(request, tmp, &remove_queue, list) { - zfcp_fsf_req_dismiss(adapter, request, counter); - counter++; + list_for_each_entry_safe(fsf_req, tmp, &remove_queue, list) { + list_del(&fsf_req->list); + fsf_req->status |= ZFCP_STATUS_FSFREQ_DISMISSED; + zfcp_fsf_req_complete(fsf_req); } } diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c index 16e2d64658afea..0acf6db0a08d7f 100644 --- a/drivers/s390/scsi/zfcp_scsi.c +++ b/drivers/s390/scsi/zfcp_scsi.c @@ -569,6 +569,9 @@ zfcp_adapter_scsi_register(struct zfcp_adapter *adapter) int retval = 0; static unsigned int unique_id = 0; + if (adapter->scsi_host) + goto out; + /* register adapter as SCSI host with mid layer of SCSI stack */ adapter->scsi_host = scsi_host_alloc(&zfcp_data.scsi_host_template, sizeof (struct zfcp_adapter *)); diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index d6510ef03035fb..aac9cd9a172f0c 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -1753,23 +1753,9 @@ config SUN3X_ESP The ESP was an on-board SCSI controller used on Sun 3/80 machines. Say Y here to compile in support for it. -config SCSI_ESP_CORE - tristate "ESP Scsi Driver Core" - depends on SCSI - select SCSI_SPI_ATTRS - help - This is a core driver for NCR53c9x based scsi chipsets, - also known as "ESP" for Emulex Scsi Processor or - Enhanced Scsi Processor. This driver does not exist by - itself, there are front-end drivers which, when enabled, - select and enable this driver. One example is SCSI_SUNESP. - These front-end drivers provide probing, DMA, and register - access support for the core driver. - config SCSI_SUNESP tristate "Sparc ESP Scsi Driver" depends on SBUS && SCSI - select SCSI_ESP_CORE help This is the driver for the Sun ESP SCSI host adapter. The ESP chipset is present in most SPARC SBUS-based computers. diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index 51cba91cd228e3..cba39679f94794 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -103,8 +103,7 @@ obj-$(CONFIG_MEGARAID_LEGACY) += megaraid.o obj-$(CONFIG_MEGARAID_NEWGEN) += megaraid/ obj-$(CONFIG_MEGARAID_SAS) += megaraid/ obj-$(CONFIG_SCSI_ACARD) += atp870u.o -obj-$(CONFIG_SCSI_ESP_CORE) += esp_scsi.o -obj-$(CONFIG_SCSI_SUNESP) += sun_esp.o +obj-$(CONFIG_SCSI_SUNESP) += esp_scsi.o sun_esp.o obj-$(CONFIG_SCSI_GDTH) += gdth.o obj-$(CONFIG_SCSI_INITIO) += initio.o obj-$(CONFIG_SCSI_INIA100) += a100u2w.o diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c index a333e62fc487e9..47014beef96e13 100644 --- a/drivers/scsi/aacraid/aachba.c +++ b/drivers/scsi/aacraid/aachba.c @@ -146,7 +146,7 @@ static char *aac_get_status_string(u32 status); static int nondasd = -1; static int dacmode = -1; -static int commit = -1; +int aac_commit = -1; int startup_timeout = 180; int aif_timeout = 120; @@ -154,7 +154,7 @@ module_param(nondasd, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(nondasd, "Control scanning of hba for nondasd devices. 0=off, 1=on"); module_param(dacmode, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(dacmode, "Control whether dma addressing is using 64 bit DAC. 0=off, 1=on"); -module_param(commit, int, S_IRUGO|S_IWUSR); +module_param_named(commit, aac_commit, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(commit, "Control whether a COMMIT_CONFIG is issued to the adapter for foreign arrays.\nThis is typically needed in systems that do not have a BIOS. 0=off, 1=on"); module_param(startup_timeout, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(startup_timeout, "The duration of time in seconds to wait for adapter to have it's kernel up and\nrunning. This is typically adjusted for large systems that do not have a BIOS."); @@ -173,6 +173,9 @@ int expose_physicals = -1; module_param(expose_physicals, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(expose_physicals, "Expose physical components of the arrays. -1=protect 0=off, 1=on"); +int aac_reset_devices = 0; +module_param_named(reset_devices, aac_reset_devices, int, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(reset_devices, "Force an adapter reset at initialization."); static inline int aac_valid_context(struct scsi_cmnd *scsicmd, struct fib *fibptr) { @@ -246,7 +249,7 @@ int aac_get_config_status(struct aac_dev *dev, int commit_flag) aac_fib_complete(fibptr); /* Send a CT_COMMIT_CONFIG to enable discovery of devices */ if (status >= 0) { - if ((commit == 1) || commit_flag) { + if ((aac_commit == 1) || commit_flag) { struct aac_commit_config * dinfo; aac_fib_init(fibptr); dinfo = (struct aac_commit_config *) fib_data(fibptr); @@ -261,7 +264,7 @@ int aac_get_config_status(struct aac_dev *dev, int commit_flag) 1, 1, NULL, NULL); aac_fib_complete(fibptr); - } else if (commit == 0) { + } else if (aac_commit == 0) { printk(KERN_WARNING "aac_get_config_status: Foreign device configurations are being ignored\n"); } @@ -340,7 +343,7 @@ int aac_get_containers(struct aac_dev *dev) static void aac_internal_transfer(struct scsi_cmnd *scsicmd, void *data, unsigned int offset, unsigned int len) { void *buf; - unsigned int transfer_len; + int transfer_len; struct scatterlist *sg = scsicmd->request_buffer; if (scsicmd->use_sg) { @@ -351,7 +354,7 @@ static void aac_internal_transfer(struct scsi_cmnd *scsicmd, void *data, unsigne transfer_len = min(scsicmd->request_bufflen, len + offset); } transfer_len -= offset; - if (buf && transfer_len) + if (buf && transfer_len > 0) memcpy(buf + offset, data, transfer_len); if (scsicmd->use_sg) diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h index a3138ee910501f..fdbedb17d03bf4 100644 --- a/drivers/scsi/aacraid/aacraid.h +++ b/drivers/scsi/aacraid/aacraid.h @@ -1826,9 +1826,12 @@ int aac_send_shutdown(struct aac_dev *dev); int aac_probe_container(struct aac_dev *dev, int cid); int _aac_rx_init(struct aac_dev *dev); int aac_rx_select_comm(struct aac_dev *dev, int comm); +int aac_rx_deliver_producer(struct fib * fib); extern int numacb; extern int acbsize; extern char aac_driver_version[]; extern int startup_timeout; extern int aif_timeout; extern int expose_physicals; +extern int aac_reset_devices; +extern int aac_commit; diff --git a/drivers/scsi/aacraid/rx.c b/drivers/scsi/aacraid/rx.c index 291cd14f4e9897..ae978a373c5642 100644 --- a/drivers/scsi/aacraid/rx.c +++ b/drivers/scsi/aacraid/rx.c @@ -378,7 +378,7 @@ static int aac_rx_check_health(struct aac_dev *dev) * * Will send a fib, returning 0 if successful. */ -static int aac_rx_deliver_producer(struct fib * fib) +int aac_rx_deliver_producer(struct fib * fib) { struct aac_dev *dev = fib->dev; struct aac_queue *q = &dev->queues->queue[AdapNormCmdQueue]; @@ -488,6 +488,8 @@ static int aac_rx_restart_adapter(struct aac_dev *dev, int bled) return -EINVAL; if (rx_readl(dev, MUnit.OMRx[0]) & KERNEL_PANIC) return -ENODEV; + if (startup_timeout < 300) + startup_timeout = 300; return 0; } @@ -542,7 +544,7 @@ int _aac_rx_init(struct aac_dev *dev) dev->a_ops.adapter_sync_cmd = rx_sync_cmd; dev->a_ops.adapter_enable_int = aac_rx_disable_interrupt; dev->OIMR = status = rx_readb (dev, MUnit.OIMR); - if ((((status & 0x0c) != 0x0c) || reset_devices) && + if ((((status & 0x0c) != 0x0c) || aac_reset_devices || reset_devices) && !aac_rx_restart_adapter(dev, 0)) ++restart; /* @@ -594,6 +596,8 @@ int _aac_rx_init(struct aac_dev *dev) } msleep(1); } + if (restart) + aac_commit = 1; /* * Fill in the common function dispatch table. */ diff --git a/drivers/scsi/aacraid/sa.c b/drivers/scsi/aacraid/sa.c index f4b5e9742ab0de..85b91bc578c9f2 100644 --- a/drivers/scsi/aacraid/sa.c +++ b/drivers/scsi/aacraid/sa.c @@ -5,7 +5,7 @@ * based on the old aacraid driver that is.. * Adaptec aacraid device driver for Linux. * - * Copyright (c) 2000 Adaptec, Inc. (aacraid@adaptec.com) + * Copyright (c) 2000-2007 Adaptec, Inc. (aacraid@adaptec.com) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -257,6 +257,11 @@ static void aac_sa_start_adapter(struct aac_dev *dev) NULL, NULL, NULL, NULL, NULL); } +static int aac_sa_restart_adapter(struct aac_dev *dev, int bled) +{ + return -EINVAL; +} + /** * aac_sa_check_health * @dev: device to check if healthy @@ -366,7 +371,9 @@ int aac_sa_init(struct aac_dev *dev) dev->a_ops.adapter_notify = aac_sa_notify_adapter; dev->a_ops.adapter_sync_cmd = sa_sync_cmd; dev->a_ops.adapter_check_health = aac_sa_check_health; + dev->a_ops.adapter_restart = aac_sa_restart_adapter; dev->a_ops.adapter_intr = aac_sa_intr; + dev->a_ops.adapter_deliver = aac_rx_deliver_producer; dev->a_ops.adapter_ioremap = aac_sa_ioremap; /* diff --git a/drivers/scsi/aic7xxx/aicasm/aicasm_gram.y b/drivers/scsi/aic7xxx/aicasm/aicasm_gram.y index c328596def3c55..6066998ed56243 100644 --- a/drivers/scsi/aic7xxx/aicasm/aicasm_gram.y +++ b/drivers/scsi/aic7xxx/aicasm/aicasm_gram.y @@ -106,6 +106,7 @@ static void make_expression(expression_t *immed, int value); static void add_conditional(symbol_t *symbol); static void add_version(const char *verstring); static int is_download_const(expression_t *immed); +void yyerror(const char *string); #define SRAM_SYMNAME "SRAM_BASE" #define SCB_SYMNAME "SCB_BASE" diff --git a/drivers/scsi/aic7xxx/aicasm/aicasm_macro_gram.y b/drivers/scsi/aic7xxx/aicasm/aicasm_macro_gram.y index 439f760b34b542..ff46aa6801bfc6 100644 --- a/drivers/scsi/aic7xxx/aicasm/aicasm_macro_gram.y +++ b/drivers/scsi/aic7xxx/aicasm/aicasm_macro_gram.y @@ -65,6 +65,7 @@ static symbol_t *macro_symbol; static void add_macro_arg(const char *argtext, int position); +void mmerror(const char *string); %} diff --git a/drivers/scsi/aic94xx/aic94xx_tmf.c b/drivers/scsi/aic94xx/aic94xx_tmf.c index 9a14a6d9727548..c0d0b7d7a8ce0d 100644 --- a/drivers/scsi/aic94xx/aic94xx_tmf.c +++ b/drivers/scsi/aic94xx/aic94xx_tmf.c @@ -290,6 +290,7 @@ static void asd_tmf_tasklet_complete(struct asd_ascb *ascb, static inline int asd_clear_nexus(struct sas_task *task) { int res = TMF_RESP_FUNC_FAILED; + int leftover; struct asd_ascb *tascb = task->lldd_task; unsigned long flags; @@ -298,10 +299,12 @@ static inline int asd_clear_nexus(struct sas_task *task) res = asd_clear_nexus_tag(task); else res = asd_clear_nexus_index(task); - wait_for_completion_timeout(&tascb->completion, - AIC94XX_SCB_TIMEOUT); + leftover = wait_for_completion_timeout(&tascb->completion, + AIC94XX_SCB_TIMEOUT); ASD_DPRINTK("came back from clear nexus\n"); spin_lock_irqsave(&task->task_state_lock, flags); + if (leftover < 1) + res = TMF_RESP_FUNC_FAILED; if (task->task_state_flags & SAS_TASK_STATE_DONE) res = TMF_RESP_FUNC_COMPLETE; spin_unlock_irqrestore(&task->task_state_lock, flags); @@ -350,6 +353,7 @@ int asd_abort_task(struct sas_task *task) unsigned long flags; struct asd_ascb *ascb = NULL; struct scb *scb; + int leftover; spin_lock_irqsave(&task->task_state_lock, flags); if (task->task_state_flags & SAS_TASK_STATE_DONE) { @@ -455,9 +459,11 @@ int asd_abort_task(struct sas_task *task) break; case TF_TMF_TASK_DONE + 0xFF00: /* done but not reported yet */ res = TMF_RESP_FUNC_FAILED; - wait_for_completion_timeout(&tascb->completion, - AIC94XX_SCB_TIMEOUT); + leftover = wait_for_completion_timeout(&tascb->completion, + AIC94XX_SCB_TIMEOUT); spin_lock_irqsave(&task->task_state_lock, flags); + if (leftover < 1) + res = TMF_RESP_FUNC_FAILED; if (task->task_state_flags & SAS_TASK_STATE_DONE) res = TMF_RESP_FUNC_COMPLETE; spin_unlock_irqrestore(&task->task_state_lock, flags); diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index 6411c458d33648..072f5771565823 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -3928,6 +3928,13 @@ static int __ipr_eh_dev_reset(struct scsi_cmnd * scsi_cmd) spin_unlock_irq(scsi_cmd->device->host->host_lock); ata_do_eh(ap, NULL, NULL, ipr_sata_reset, NULL); spin_lock_irq(scsi_cmd->device->host->host_lock); + + list_for_each_entry(ipr_cmd, &ioa_cfg->pending_q, queue) { + if (ipr_cmd->ioarcb.res_handle == res->cfgte.res_handle) { + rc = -EIO; + break; + } + } } else rc = ipr_device_reset(ioa_cfg, res); res->resetting_device = 0; diff --git a/drivers/scsi/libsrp.c b/drivers/scsi/libsrp.c index 5631c199a8ebd0..732446e6396355 100644 --- a/drivers/scsi/libsrp.c +++ b/drivers/scsi/libsrp.c @@ -254,6 +254,7 @@ static int srp_indirect_data(struct scsi_cmnd *sc, struct srp_cmd *cmd, sg_init_one(&dummy, md, id->table_desc.len); sg_dma_address(&dummy) = token; + sg_dma_len(&dummy) = id->table_desc.len; err = rdma_io(sc, &dummy, 1, &id->table_desc, 1, DMA_TO_DEVICE, id->table_desc.len); if (err) { diff --git a/drivers/scsi/megaraid/megaraid_mm.c b/drivers/scsi/megaraid/megaraid_mm.c index e075a52ac104e0..84d9c27133d408 100644 --- a/drivers/scsi/megaraid/megaraid_mm.c +++ b/drivers/scsi/megaraid/megaraid_mm.c @@ -14,7 +14,7 @@ * * Common management module */ - +#include <linux/sched.h> #include "megaraid_mm.h" diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c index 7a812677ff8a4d..e2cf12ef3688d3 100644 --- a/drivers/scsi/megaraid/megaraid_sas.c +++ b/drivers/scsi/megaraid/megaraid_sas.c @@ -10,7 +10,7 @@ * 2 of the License, or (at your option) any later version. * * FILE : megaraid_sas.c - * Version : v00.00.03.10-rc1 + * Version : v00.00.03.10-rc5 * * Authors: * (email-id : megaraidlinux@lsi.com) @@ -886,6 +886,7 @@ megasas_queue_command(struct scsi_cmnd *scmd, void (*done) (struct scsi_cmnd *)) goto out_return_cmd; cmd->scmd = scmd; + scmd->SCp.ptr = (char *)cmd; /* * Issue the command to the FW @@ -919,7 +920,7 @@ static int megasas_slave_configure(struct scsi_device *sdev) * The RAID firmware may require extended timeouts. */ if (sdev->channel >= MEGASAS_MAX_PD_CHANNELS) - sdev->timeout = 90 * HZ; + sdev->timeout = MEGASAS_DEFAULT_CMD_TIMEOUT * HZ; return 0; } @@ -981,8 +982,8 @@ static int megasas_generic_reset(struct scsi_cmnd *scmd) instance = (struct megasas_instance *)scmd->device->host->hostdata; - scmd_printk(KERN_NOTICE, scmd, "megasas: RESET -%ld cmd=%x\n", - scmd->serial_number, scmd->cmnd[0]); + scmd_printk(KERN_NOTICE, scmd, "megasas: RESET -%ld cmd=%x retries=%x\n", + scmd->serial_number, scmd->cmnd[0], scmd->retries); if (instance->hw_crit_error) { printk(KERN_ERR "megasas: cannot recover from previous reset " @@ -1000,6 +1001,39 @@ static int megasas_generic_reset(struct scsi_cmnd *scmd) } /** + * megasas_reset_timer - quiesce the adapter if required + * @scmd: scsi cmnd + * + * Sets the FW busy flag and reduces the host->can_queue if the + * cmd has not been completed within the timeout period. + */ +static enum +scsi_eh_timer_return megasas_reset_timer(struct scsi_cmnd *scmd) +{ + struct megasas_cmd *cmd = (struct megasas_cmd *)scmd->SCp.ptr; + struct megasas_instance *instance; + unsigned long flags; + + if (time_after(jiffies, scmd->jiffies_at_alloc + + (MEGASAS_DEFAULT_CMD_TIMEOUT * 2) * HZ)) { + return EH_NOT_HANDLED; + } + + instance = cmd->instance; + if (!(instance->flag & MEGASAS_FW_BUSY)) { + /* FW is busy, throttle IO */ + spin_lock_irqsave(instance->host->host_lock, flags); + + instance->host->can_queue = 16; + instance->last_time = jiffies; + instance->flag |= MEGASAS_FW_BUSY; + + spin_unlock_irqrestore(instance->host->host_lock, flags); + } + return EH_RESET_TIMER; +} + +/** * megasas_reset_device - Device reset handler entry point */ static int megasas_reset_device(struct scsi_cmnd *scmd) @@ -1112,6 +1146,7 @@ static struct scsi_host_template megasas_template = { .eh_device_reset_handler = megasas_reset_device, .eh_bus_reset_handler = megasas_reset_bus_host, .eh_host_reset_handler = megasas_reset_bus_host, + .eh_timed_out = megasas_reset_timer, .bios_param = megasas_bios_param, .use_clustering = ENABLE_CLUSTERING, }; @@ -1215,9 +1250,8 @@ megasas_complete_cmd(struct megasas_instance *instance, struct megasas_cmd *cmd, int exception = 0; struct megasas_header *hdr = &cmd->frame->hdr; - if (cmd->scmd) { - cmd->scmd->SCp.ptr = (char *)0; - } + if (cmd->scmd) + cmd->scmd->SCp.ptr = NULL; switch (hdr->cmd) { @@ -1806,6 +1840,7 @@ static void megasas_complete_cmd_dpc(unsigned long instance_addr) u32 context; struct megasas_cmd *cmd; struct megasas_instance *instance = (struct megasas_instance *)instance_addr; + unsigned long flags; /* If we have already declared adapter dead, donot complete cmds */ if (instance->hw_crit_error) @@ -1828,6 +1863,22 @@ static void megasas_complete_cmd_dpc(unsigned long instance_addr) } *instance->consumer = producer; + + /* + * Check if we can restore can_queue + */ + if (instance->flag & MEGASAS_FW_BUSY + && time_after(jiffies, instance->last_time + 5 * HZ) + && atomic_read(&instance->fw_outstanding) < 17) { + + spin_lock_irqsave(instance->host->host_lock, flags); + instance->flag &= ~MEGASAS_FW_BUSY; + instance->host->can_queue = + instance->max_fw_cmds - MEGASAS_INT_CMDS; + + spin_unlock_irqrestore(instance->host->host_lock, flags); + } + } /** @@ -2398,6 +2449,8 @@ megasas_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) instance->init_id = MEGASAS_DEFAULT_INIT_ID; megasas_dbg_lvl = 0; + instance->flag = 0; + instance->last_time = 0; /* * Initialize MFI Firmware diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h index e862992ee37783..4dffc918a414c3 100644 --- a/drivers/scsi/megaraid/megaraid_sas.h +++ b/drivers/scsi/megaraid/megaraid_sas.h @@ -18,9 +18,9 @@ /* * MegaRAID SAS Driver meta data */ -#define MEGASAS_VERSION "00.00.03.10-rc1" -#define MEGASAS_RELDATE "Feb 14, 2007" -#define MEGASAS_EXT_VERSION "Wed Feb 14 10:14:25 PST 2007" +#define MEGASAS_VERSION "00.00.03.10-rc5" +#define MEGASAS_RELDATE "May 17, 2007" +#define MEGASAS_EXT_VERSION "Thu May 17 10:09:32 PDT 2007" /* * Device IDs @@ -539,6 +539,8 @@ struct megasas_ctrl_info { #define MEGASAS_DBG_LVL 1 +#define MEGASAS_FW_BUSY 1 + /* * When SCSI mid-layer calls driver's reset routine, driver waits for * MEGASAS_RESET_WAIT_TIME seconds for all outstanding IO to complete. Note @@ -549,8 +551,8 @@ struct megasas_ctrl_info { #define MEGASAS_RESET_WAIT_TIME 180 #define MEGASAS_INTERNAL_CMD_WAIT_TIME 180 #define MEGASAS_RESET_NOTICE_INTERVAL 5 - #define MEGASAS_IOCTL_CMD 0 +#define MEGASAS_DEFAULT_CMD_TIMEOUT 90 /* * FW reports the maximum of number of commands that it can accept (maximum @@ -1073,7 +1075,6 @@ struct megasas_instance { struct megasas_register_set __iomem *reg_set; s8 init_id; - u8 reserved[3]; u16 max_num_sge; u16 max_fw_cmds; @@ -1104,6 +1105,9 @@ struct megasas_instance { struct megasas_instance_template *instancet; struct tasklet_struct isr_tasklet; + + u8 flag; + unsigned long last_time; }; #define MEGASAS_IS_LOGICAL(scp) \ diff --git a/drivers/scsi/pluto.c b/drivers/scsi/pluto.c index 3b2e1a53e6e2df..d953d43fe2e614 100644 --- a/drivers/scsi/pluto.c +++ b/drivers/scsi/pluto.c @@ -4,6 +4,7 @@ * */ +#include <linux/completion.h> #include <linux/kernel.h> #include <linux/delay.h> #include <linux/types.h> @@ -50,16 +51,10 @@ static struct ctrl_inquiry { } *fcs __initdata; static int fcscount __initdata = 0; static atomic_t fcss __initdata = ATOMIC_INIT(0); -DECLARE_MUTEX_LOCKED(fc_sem); +static DECLARE_COMPLETION(fc_detect_complete); static int pluto_encode_addr(Scsi_Cmnd *SCpnt, u16 *addr, fc_channel *fc, fcp_cmnd *fcmd); -static void __init pluto_detect_timeout(unsigned long data) -{ - PLND(("Timeout\n")) - up(&fc_sem); -} - static void __init pluto_detect_done(Scsi_Cmnd *SCpnt) { /* Do nothing */ @@ -69,7 +64,7 @@ static void __init pluto_detect_scsi_done(Scsi_Cmnd *SCpnt) { PLND(("Detect done %08lx\n", (long)SCpnt)) if (atomic_dec_and_test (&fcss)) - up(&fc_sem); + complete(&fc_detect_complete); } int pluto_slave_configure(struct scsi_device *device) @@ -96,7 +91,6 @@ int __init pluto_detect(struct scsi_host_template *tpnt) int i, retry, nplutos; fc_channel *fc; struct scsi_device dev; - DEFINE_TIMER(fc_timer, pluto_detect_timeout, 0, 0); tpnt->proc_name = "pluto"; fcscount = 0; @@ -187,15 +181,11 @@ int __init pluto_detect(struct scsi_host_template *tpnt) } } - fc_timer.expires = jiffies + 10 * HZ; - add_timer(&fc_timer); - - down(&fc_sem); + wait_for_completion_timeout(&fc_detect_complete, 10 * HZ); PLND(("Woken up\n")) if (!atomic_read(&fcss)) break; /* All fc channels have answered us */ } - del_timer_sync(&fc_timer); PLND(("Finished search\n")) for (i = 0, nplutos = 0; i < fcscount; i++) { diff --git a/drivers/scsi/scsi_devinfo.c b/drivers/scsi/scsi_devinfo.c index ce63044b1ec8a6..18dd5cc4d7c6f5 100644 --- a/drivers/scsi/scsi_devinfo.c +++ b/drivers/scsi/scsi_devinfo.c @@ -209,6 +209,7 @@ static struct { {"PIONEER", "CD-ROM DRM-602X", NULL, BLIST_FORCELUN | BLIST_SINGLELUN}, {"PIONEER", "CD-ROM DRM-604X", NULL, BLIST_FORCELUN | BLIST_SINGLELUN}, {"PIONEER", "CD-ROM DRM-624X", NULL, BLIST_FORCELUN | BLIST_SINGLELUN}, + {"Promise", "", NULL, BLIST_SPARSELUN}, {"REGAL", "CDC-4X", NULL, BLIST_MAX5LUN | BLIST_SINGLELUN}, {"SanDisk", "ImageMate CF-SD1", NULL, BLIST_FORCELUN}, {"SEAGATE", "ST34555N", "0930", BLIST_NOTQ}, /* Chokes on tagged INQUIRY */ diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index f071b9edaf360f..448d316f12d780 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -1789,7 +1789,7 @@ static void sd_shutdown(struct device *dev) static int sd_suspend(struct device *dev, pm_message_t mesg) { struct scsi_disk *sdkp = scsi_disk_get_from_dev(dev); - int ret; + int ret = 0; if (!sdkp) return 0; /* this can happen */ @@ -1798,30 +1798,34 @@ static int sd_suspend(struct device *dev, pm_message_t mesg) sd_printk(KERN_NOTICE, sdkp, "Synchronizing SCSI cache\n"); ret = sd_sync_cache(sdkp); if (ret) - return ret; + goto done; } if (mesg.event == PM_EVENT_SUSPEND && sdkp->device->manage_start_stop) { sd_printk(KERN_NOTICE, sdkp, "Stopping disk\n"); ret = sd_start_stop_device(sdkp, 0); - if (ret) - return ret; } - return 0; +done: + scsi_disk_put(sdkp); + return ret; } static int sd_resume(struct device *dev) { struct scsi_disk *sdkp = scsi_disk_get_from_dev(dev); + int ret = 0; if (!sdkp->device->manage_start_stop) - return 0; + goto done; sd_printk(KERN_NOTICE, sdkp, "Starting disk\n"); + ret = sd_start_stop_device(sdkp, 1); - return sd_start_stop_device(sdkp, 1); +done: + scsi_disk_put(sdkp); + return ret; } /** diff --git a/drivers/scsi/stex.c b/drivers/scsi/stex.c index baf516d09d79d4..adda296b594bfb 100644 --- a/drivers/scsi/stex.c +++ b/drivers/scsi/stex.c @@ -32,11 +32,12 @@ #include <scsi/scsi_cmnd.h> #include <scsi/scsi_host.h> #include <scsi/scsi_tcq.h> +#include <scsi/scsi_dbg.h> #define DRV_NAME "stex" -#define ST_DRIVER_VERSION "3.1.0.1" +#define ST_DRIVER_VERSION "3.6.0000.1" #define ST_VER_MAJOR 3 -#define ST_VER_MINOR 1 +#define ST_VER_MINOR 6 #define ST_OEM 0 #define ST_BUILD_VER 1 @@ -113,10 +114,6 @@ enum { SG_CF_64B = 0x40, /* 64 bit item */ SG_CF_HOST = 0x20, /* sg in host memory */ - ST_MAX_ARRAY_SUPPORTED = 16, - ST_MAX_TARGET_NUM = (ST_MAX_ARRAY_SUPPORTED+1), - ST_MAX_LUN_PER_TARGET = 16, - st_shasta = 0, st_vsc = 1, st_vsc1 = 2, @@ -561,7 +558,7 @@ stex_queuecommand(struct scsi_cmnd *cmd, void (* done)(struct scsi_cmnd *)) u16 tag; host = cmd->device->host; id = cmd->device->id; - lun = cmd->device->channel; /* firmware lun issue work around */ + lun = cmd->device->lun; hba = (struct st_hba *) &host->hostdata[0]; switch (cmd->cmnd[0]) { @@ -580,8 +577,26 @@ stex_queuecommand(struct scsi_cmnd *cmd, void (* done)(struct scsi_cmnd *)) stex_invalid_field(cmd, done); return 0; } + case REPORT_LUNS: + /* + * The shasta firmware does not report actual luns in the + * target, so fail the command to force sequential lun scan. + * Also, the console device does not support this command. + */ + if (hba->cardtype == st_shasta || id == host->max_id - 1) { + stex_invalid_field(cmd, done); + return 0; + } + break; + case TEST_UNIT_READY: + if (id == host->max_id - 1) { + cmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8; + done(cmd); + return 0; + } + break; case INQUIRY: - if (id != ST_MAX_ARRAY_SUPPORTED) + if (id != host->max_id - 1) break; if (lun == 0 && (cmd->cmnd[1] & INQUIRY_EVPD) == 0) { stex_direct_copy(cmd, console_inq_page, @@ -599,7 +614,7 @@ stex_queuecommand(struct scsi_cmnd *cmd, void (* done)(struct scsi_cmnd *)) ver.oem = ST_OEM; ver.build = ST_BUILD_VER; ver.signature[0] = PASSTHRU_SIGNATURE; - ver.console_id = ST_MAX_ARRAY_SUPPORTED; + ver.console_id = host->max_id - 1; ver.host_no = hba->host->host_no; cmd->result = stex_direct_copy(cmd, &ver, sizeof(ver)) ? DID_OK << 16 | COMMAND_COMPLETE << 8 : @@ -620,13 +635,8 @@ stex_queuecommand(struct scsi_cmnd *cmd, void (* done)(struct scsi_cmnd *)) req = stex_alloc_req(hba); - if (hba->cardtype == st_yosemite) { - req->lun = lun * (ST_MAX_TARGET_NUM - 1) + id; - req->target = 0; - } else { - req->lun = lun; - req->target = id; - } + req->lun = lun; + req->target = id; /* cdb */ memcpy(req->cdb, cmd->cmnd, STEX_CDB_LENGTH); @@ -730,18 +740,6 @@ static void stex_ys_commands(struct st_hba *hba, ccb->srb_status = SRB_STATUS_SELECTION_TIMEOUT; else ccb->srb_status = SRB_STATUS_SUCCESS; - } else if (ccb->cmd->cmnd[0] == REPORT_LUNS) { - u8 *report_lun_data = (u8 *)hba->copy_buffer; - - count = STEX_EXTRA_SIZE; - stex_internal_copy(ccb->cmd, report_lun_data, - &count, ccb->sg_count, ST_FROM_CMD); - if (report_lun_data[2] || report_lun_data[3]) { - report_lun_data[2] = 0x00; - report_lun_data[3] = 0x08; - stex_internal_copy(ccb->cmd, report_lun_data, - &count, ccb->sg_count, ST_TO_CMD); - } } } @@ -958,6 +956,11 @@ static int stex_abort(struct scsi_cmnd *cmd) u32 data; int result = SUCCESS; unsigned long flags; + + printk(KERN_INFO DRV_NAME + "(%s): aborting command\n", pci_name(hba->pdev)); + scsi_print_command(cmd); + base = hba->mmio_base; spin_lock_irqsave(host->host_lock, flags); if (tag < host->can_queue && hba->ccb[tag].cmd == cmd) @@ -1014,7 +1017,12 @@ static void stex_hard_reset(struct st_hba *hba) pci_read_config_byte(bus->self, PCI_BRIDGE_CONTROL, &pci_bctl); pci_bctl |= PCI_BRIDGE_CTL_BUS_RESET; pci_write_config_byte(bus->self, PCI_BRIDGE_CONTROL, pci_bctl); - msleep(1); + + /* + * 1 ms may be enough for 8-port controllers. But 16-port controllers + * require more time to finish bus reset. Use 100 ms here for safety + */ + msleep(100); pci_bctl &= ~PCI_BRIDGE_CTL_BUS_RESET; pci_write_config_byte(bus->self, PCI_BRIDGE_CONTROL, pci_bctl); @@ -1038,6 +1046,10 @@ static int stex_reset(struct scsi_cmnd *cmd) unsigned long before; hba = (struct st_hba *) &cmd->device->host->hostdata[0]; + printk(KERN_INFO DRV_NAME + "(%s): resetting host\n", pci_name(hba->pdev)); + scsi_print_command(cmd); + hba->mu_status = MU_STATE_RESETTING; if (hba->cardtype == st_shasta) @@ -1157,7 +1169,7 @@ stex_probe(struct pci_dev *pdev, const struct pci_device_id *id) goto out_scsi_host_put; } - hba->mmio_base = ioremap(pci_resource_start(pdev, 0), + hba->mmio_base = ioremap_nocache(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0)); if ( !hba->mmio_base) { printk(KERN_ERR DRV_NAME "(%s): memory map failed\n", @@ -1192,12 +1204,18 @@ stex_probe(struct pci_dev *pdev, const struct pci_device_id *id) hba->copy_buffer = hba->dma_mem + MU_BUFFER_SIZE; hba->mu_status = MU_STATE_STARTING; - /* firmware uses id/lun pair for a logical drive, but lun would be - always 0 if CONFIG_SCSI_MULTI_LUN not configured, so we use - channel to map lun here */ - host->max_channel = ST_MAX_LUN_PER_TARGET - 1; - host->max_id = ST_MAX_TARGET_NUM; - host->max_lun = 1; + if (hba->cardtype == st_shasta) { + host->max_lun = 8; + host->max_id = 16 + 1; + } else if (hba->cardtype == st_yosemite) { + host->max_lun = 128; + host->max_id = 1 + 1; + } else { + /* st_vsc and st_vsc1 */ + host->max_lun = 1; + host->max_id = 128 + 1; + } + host->max_channel = 0; host->unique_id = host->host_no; host->max_cmd_len = STEX_CDB_LENGTH; diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index 48e259a0167d18..c84dab083a852b 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -894,7 +894,7 @@ static void autoconfig_16550a(struct uart_8250_port *up) quot = serial_dl_read(up); quot <<= 3; - status1 = serial_in(up, 0x04); /* EXCR1 */ + status1 = serial_in(up, 0x04); /* EXCR2 */ status1 &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */ status1 |= 0x10; /* 1.625 divisor for baud_base --> 921600 */ serial_outp(up, 0x04, status1); @@ -2617,7 +2617,22 @@ void serial8250_suspend_port(int line) */ void serial8250_resume_port(int line) { - uart_resume_port(&serial8250_reg, &serial8250_ports[line].port); + struct uart_8250_port *up = &serial8250_ports[line]; + + if (up->capabilities & UART_NATSEMI) { + unsigned char tmp; + + /* Ensure it's still in high speed mode */ + serial_outp(up, UART_LCR, 0xE0); + + tmp = serial_in(up, 0x04); /* EXCR2 */ + tmp &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */ + tmp |= 0x10; /* 1.625 divisor for baud_base --> 921600 */ + serial_outp(up, 0x04, tmp); + + serial_outp(up, UART_LCR, 0); + } + uart_resume_port(&serial8250_reg, &up->port); } /* @@ -2694,7 +2709,7 @@ static int serial8250_resume(struct platform_device *dev) struct uart_8250_port *up = &serial8250_ports[i]; if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev) - uart_resume_port(&serial8250_reg, &up->port); + serial8250_resume_port(i); } return 0; diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c index 1a9a24b82636e4..00d1255e4c1202 100644 --- a/drivers/serial/amba-pl010.c +++ b/drivers/serial/amba-pl010.c @@ -167,8 +167,9 @@ static void pl010_rx_chars(struct uart_amba_port *uap) ignore_char: status = readb(uap->port.membase + UART01x_FR); } + spin_unlock(&port->lock); tty_flip_buffer_push(tty); - return; + spin_lock(&port->lock); } static void pl010_tx_chars(struct uart_amba_port *uap) diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c index 44639e71372a7e..954073c6ce3a4e 100644 --- a/drivers/serial/amba-pl011.c +++ b/drivers/serial/amba-pl011.c @@ -153,8 +153,9 @@ static void pl011_rx_chars(struct uart_amba_port *uap) ignore_char: status = readw(uap->port.membase + UART01x_FR); } + spin_unlock(&uap->port.lock); tty_flip_buffer_push(tty); - return; + spin_lock(&uap->port.lock); } static void pl011_tx_chars(struct uart_amba_port *uap) diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index 408390f93db9e7..787dc7168f3e00 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -6,8 +6,6 @@ * Created: * Description: Driver for blackfin 5xx serial ports * - * Rev: $Id: bfin_5xx.c,v 1.19 2006/09/24 02:33:53 aubrey Exp $ - * * Modified: * Copyright 2006 Analog Devices Inc. * @@ -152,7 +150,7 @@ static void local_put_char(struct bfin_serial_port *uart, char ch) static void bfin_serial_rx_chars(struct bfin_serial_port *uart) { - struct tty_struct *tty = uart->port.info?uart->port.info->tty:0; + struct tty_struct *tty = uart->port.info->tty; unsigned int status, ch, flg; #ifdef BF533_FAMILY static int in_break = 0; @@ -173,8 +171,10 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart) if (ch != 0) { in_break = 0; ch = UART_GET_CHAR(uart); - } - return; + if (bfin_revid() < 5) + return; + } else + return; } #endif @@ -185,27 +185,32 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart) uart->port.icount.brk++; if (uart_handle_break(&uart->port)) goto ignore_char; - flg = TTY_BREAK; - } else if (status & PE) { - flg = TTY_PARITY; + } + if (status & PE) uart->port.icount.parity++; - } else if (status & OE) { - flg = TTY_OVERRUN; + if (status & OE) uart->port.icount.overrun++; - } else if (status & FE) { - flg = TTY_FRAME; + if (status & FE) uart->port.icount.frame++; - } else + + status &= uart->port.read_status_mask; + + if (status & BI) + flg = TTY_BREAK; + else if (status & PE) + flg = TTY_PARITY; + else if (status & FE) + flg = TTY_FRAME; + else flg = TTY_NORMAL; if (uart_handle_sysrq_char(&uart->port, ch)) goto ignore_char; - if (tty) - uart_insert_char(&uart->port, status, 2, ch, flg); -ignore_char: - if (tty) - tty_flip_buffer_push(tty); + uart_insert_char(&uart->port, status, OE, ch, flg); + + ignore_char: + tty_flip_buffer_push(tty); } static void bfin_serial_tx_chars(struct bfin_serial_port *uart) @@ -240,24 +245,29 @@ static void bfin_serial_tx_chars(struct bfin_serial_port *uart) bfin_serial_stop_tx(&uart->port); } -static irqreturn_t bfin_serial_int(int irq, void *dev_id) +static irqreturn_t bfin_serial_rx_int(int irq, void *dev_id) { struct bfin_serial_port *uart = dev_id; - unsigned short status; spin_lock(&uart->port.lock); - status = UART_GET_IIR(uart); - do { - if ((status & IIR_STATUS) == IIR_TX_READY) - bfin_serial_tx_chars(uart); - if ((status & IIR_STATUS) == IIR_RX_READY) - bfin_serial_rx_chars(uart); - status = UART_GET_IIR(uart); - } while (status & (IIR_TX_READY | IIR_RX_READY)); + while ((UART_GET_IIR(uart) & IIR_STATUS) == IIR_RX_READY) + bfin_serial_rx_chars(uart); spin_unlock(&uart->port.lock); return IRQ_HANDLED; } +static irqreturn_t bfin_serial_tx_int(int irq, void *dev_id) +{ + struct bfin_serial_port *uart = dev_id; + + spin_lock(&uart->port.lock); + while ((UART_GET_IIR(uart) & IIR_STATUS) == IIR_TX_READY) + bfin_serial_tx_chars(uart); + spin_unlock(&uart->port.lock); + return IRQ_HANDLED; +} + + static void bfin_serial_do_work(struct work_struct *work) { struct bfin_serial_port *uart = container_of(work, struct bfin_serial_port, cts_workqueue); @@ -319,7 +329,7 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart) spin_unlock_irqrestore(&uart->port.lock, flags); } -static void bfin_serial_dma_rx_chars(struct bfin_serial_port * uart) +static void bfin_serial_dma_rx_chars(struct bfin_serial_port *uart) { struct tty_struct *tty = uart->port.info->tty; int i, flg, status; @@ -331,25 +341,32 @@ static void bfin_serial_dma_rx_chars(struct bfin_serial_port * uart) uart->port.icount.brk++; if (uart_handle_break(&uart->port)) goto dma_ignore_char; - flg = TTY_BREAK; - } else if (status & PE) { - flg = TTY_PARITY; + } + if (status & PE) uart->port.icount.parity++; - } else if (status & OE) { - flg = TTY_OVERRUN; + if (status & OE) uart->port.icount.overrun++; - } else if (status & FE) { - flg = TTY_FRAME; + if (status & FE) uart->port.icount.frame++; - } else + + status &= uart->port.read_status_mask; + + if (status & BI) + flg = TTY_BREAK; + else if (status & PE) + flg = TTY_PARITY; + else if (status & FE) + flg = TTY_FRAME; + else flg = TTY_NORMAL; for (i = uart->rx_dma_buf.head; i < uart->rx_dma_buf.tail; i++) { if (uart_handle_sysrq_char(&uart->port, uart->rx_dma_buf.buf[i])) goto dma_ignore_char; - uart_insert_char(&uart->port, status, 2, uart->rx_dma_buf.buf[i], flg); + uart_insert_char(&uart->port, status, OE, uart->rx_dma_buf.buf[i], flg); } -dma_ignore_char: + + dma_ignore_char: tty_flip_buffer_push(tty); } @@ -545,14 +562,14 @@ static int bfin_serial_startup(struct uart_port *port) add_timer(&(uart->rx_dma_timer)); #else if (request_irq - (uart->port.irq, bfin_serial_int, IRQF_DISABLED, + (uart->port.irq, bfin_serial_rx_int, IRQF_DISABLED, "BFIN_UART_RX", uart)) { printk(KERN_NOTICE "Unable to attach BlackFin UART RX interrupt\n"); return -EBUSY; } if (request_irq - (uart->port.irq+1, bfin_serial_int, IRQF_DISABLED, + (uart->port.irq+1, bfin_serial_tx_int, IRQF_DISABLED, "BFIN_UART_TX", uart)) { printk(KERN_NOTICE "Unable to attach BlackFin UART TX interrupt\n"); free_irq(uart->port.irq, uart); @@ -614,13 +631,27 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios, lcr |= EPS; } - /* These controls are not implemented for this port */ - termios->c_iflag |= INPCK | BRKINT | PARMRK; - termios->c_iflag &= ~(IGNPAR | IGNBRK); + port->read_status_mask = OE; + if (termios->c_iflag & INPCK) + port->read_status_mask |= (FE | PE); + if (termios->c_iflag & (BRKINT | PARMRK)) + port->read_status_mask |= BI; - /* These controls are not implemented for this port */ - termios->c_iflag |= INPCK | BRKINT | PARMRK; - termios->c_iflag &= ~(IGNPAR | IGNBRK); + /* + * Characters to ignore + */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= FE | PE; + if (termios->c_iflag & IGNBRK) { + port->ignore_status_mask |= BI; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= OE; + } baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); quot = uart_get_divisor(port, baud); diff --git a/drivers/serial/icom.c b/drivers/serial/icom.c index 6202995e821155..9d3105b64a7a59 100644 --- a/drivers/serial/icom.c +++ b/drivers/serial/icom.c @@ -69,33 +69,40 @@ static const struct pci_device_id icom_pci_table[] = { { - .vendor = PCI_VENDOR_ID_IBM, - .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_1, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .driver_data = ADAPTER_V1, - }, + .vendor = PCI_VENDOR_ID_IBM, + .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_1, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = ADAPTER_V1, + }, { - .vendor = PCI_VENDOR_ID_IBM, - .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2, - .subvendor = PCI_VENDOR_ID_IBM, - .subdevice = PCI_DEVICE_ID_IBM_ICOM_V2_TWO_PORTS_RVX, - .driver_data = ADAPTER_V2, - }, + .vendor = PCI_VENDOR_ID_IBM, + .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2, + .subvendor = PCI_VENDOR_ID_IBM, + .subdevice = PCI_DEVICE_ID_IBM_ICOM_V2_TWO_PORTS_RVX, + .driver_data = ADAPTER_V2, + }, { - .vendor = PCI_VENDOR_ID_IBM, - .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2, - .subvendor = PCI_VENDOR_ID_IBM, - .subdevice = PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM, - .driver_data = ADAPTER_V2, - }, + .vendor = PCI_VENDOR_ID_IBM, + .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2, + .subvendor = PCI_VENDOR_ID_IBM, + .subdevice = PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM, + .driver_data = ADAPTER_V2, + }, { - .vendor = PCI_VENDOR_ID_IBM, - .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2, - .subvendor = PCI_VENDOR_ID_IBM, - .subdevice = PCI_DEVICE_ID_IBM_ICOM_FOUR_PORT_MODEL, - .driver_data = ADAPTER_V2, - }, + .vendor = PCI_VENDOR_ID_IBM, + .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2, + .subvendor = PCI_VENDOR_ID_IBM, + .subdevice = PCI_DEVICE_ID_IBM_ICOM_FOUR_PORT_MODEL, + .driver_data = ADAPTER_V2, + }, + { + .vendor = PCI_VENDOR_ID_IBM, + .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2, + .subvendor = PCI_VENDOR_ID_IBM, + .subdevice = PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM_PCIE, + .driver_data = ADAPTER_V2, + }, {} }; diff --git a/drivers/serial/serial_ks8695.c b/drivers/serial/serial_ks8695.c index c5346d67731523..8721afe1ae4fa2 100644 --- a/drivers/serial/serial_ks8695.c +++ b/drivers/serial/serial_ks8695.c @@ -301,11 +301,11 @@ static int ks8695uart_startup(struct uart_port *port) retval = request_irq(KS8695_IRQ_UART_LINE_STATUS, ks8695uart_rx_chars, IRQF_DISABLED, "UART LineStatus", port); if (retval) - return err_ls; + goto err_ls; retval = request_irq(KS8695_IRQ_UART_MODEM_STATUS, ks8695uart_modem_status, IRQF_DISABLED, "UART ModemStatus", port); if (retval) - return err_ms; + goto err_ms; return 0; @@ -589,7 +589,7 @@ static int __init ks8695_console_setup(struct console *co, char *options) return uart_set_options(port, co, baud, parity, bits, flow); } -extern struct uart_driver ks8695_reg; +static struct uart_driver ks8695_reg; static struct console ks8695_console = { .name = SERIAL_KS8695_DEVNAME, diff --git a/drivers/serial/suncore.c b/drivers/serial/suncore.c index e35d9ab359f156..b45ba5392dd362 100644 --- a/drivers/serial/suncore.c +++ b/drivers/serial/suncore.c @@ -30,9 +30,9 @@ void sunserial_console_termios(struct console *con) { char mode[16], buf[16], *s; - char *mode_prop = "ttyX-mode"; - char *cd_prop = "ttyX-ignore-cd"; - char *dtr_prop = "ttyX-rts-dtr-off"; + char mode_prop[] = "ttyX-mode"; + char cd_prop[] = "ttyX-ignore-cd"; + char dtr_prop[] = "ttyX-rts-dtr-off"; char *ssp_console_modes_prop = "ssp-console-modes"; int baud, bits, stop, cflag; char parity; diff --git a/drivers/serial/sunhv.c b/drivers/serial/sunhv.c index c3a6bd2e7950b3..96557e6dba60c4 100644 --- a/drivers/serial/sunhv.c +++ b/drivers/serial/sunhv.c @@ -1,6 +1,6 @@ /* sunhv.c: Serial driver for SUN4V hypervisor console. * - * Copyright (C) 2006 David S. Miller (davem@davemloft.net) + * Copyright (C) 2006, 2007 David S. Miller (davem@davemloft.net) */ #include <linux/module.h> @@ -35,57 +35,51 @@ #define CON_BREAK ((long)-1) #define CON_HUP ((long)-2) -static inline long hypervisor_con_getchar(long *status) -{ - register unsigned long func asm("%o5"); - register unsigned long arg0 asm("%o0"); - register unsigned long arg1 asm("%o1"); - - func = HV_FAST_CONS_GETCHAR; - arg0 = 0; - arg1 = 0; - __asm__ __volatile__("ta %6" - : "=&r" (func), "=&r" (arg0), "=&r" (arg1) - : "0" (func), "1" (arg0), "2" (arg1), - "i" (HV_FAST_TRAP)); +#define IGNORE_BREAK 0x1 +#define IGNORE_ALL 0x2 - *status = arg0; +static char *con_write_page; +static char *con_read_page; - return (long) arg1; -} +static int hung_up = 0; -static inline long hypervisor_con_putchar(long ch) +static void transmit_chars_putchar(struct uart_port *port, struct circ_buf *xmit) { - register unsigned long func asm("%o5"); - register unsigned long arg0 asm("%o0"); + while (!uart_circ_empty(xmit)) { + long status = sun4v_con_putchar(xmit->buf[xmit->tail]); - func = HV_FAST_CONS_PUTCHAR; - arg0 = ch; - __asm__ __volatile__("ta %4" - : "=&r" (func), "=&r" (arg0) - : "0" (func), "1" (arg0), "i" (HV_FAST_TRAP)); + if (status != HV_EOK) + break; - return (long) arg0; + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + } } -#define IGNORE_BREAK 0x1 -#define IGNORE_ALL 0x2 +static void transmit_chars_write(struct uart_port *port, struct circ_buf *xmit) +{ + while (!uart_circ_empty(xmit)) { + unsigned long ra = __pa(xmit->buf + xmit->tail); + unsigned long len, status, sent; -static int hung_up = 0; + len = CIRC_CNT_TO_END(xmit->head, xmit->tail, + UART_XMIT_SIZE); + status = sun4v_con_write(ra, len, &sent); + if (status != HV_EOK) + break; + xmit->tail = (xmit->tail + sent) & (UART_XMIT_SIZE - 1); + port->icount.tx += sent; + } +} -static struct tty_struct *receive_chars(struct uart_port *port) +static int receive_chars_getchar(struct uart_port *port, struct tty_struct *tty) { - struct tty_struct *tty = NULL; int saw_console_brk = 0; int limit = 10000; - if (port->info != NULL) /* Unopened serial console */ - tty = port->info->tty; - while (limit-- > 0) { long status; - long c = hypervisor_con_getchar(&status); - unsigned char flag; + long c = sun4v_con_getchar(&status); if (status == HV_EWOULDBLOCK) break; @@ -110,27 +104,90 @@ static struct tty_struct *receive_chars(struct uart_port *port) continue; } - flag = TTY_NORMAL; port->icount.rx++; - if (c == CON_BREAK) { - port->icount.brk++; - if (uart_handle_break(port)) - continue; - flag = TTY_BREAK; - } if (uart_handle_sysrq_char(port, c)) continue; - if ((port->ignore_status_mask & IGNORE_ALL) || - ((port->ignore_status_mask & IGNORE_BREAK) && - (c == CON_BREAK))) + tty_insert_flip_char(tty, c, TTY_NORMAL); + } + + return saw_console_brk; +} + +static int receive_chars_read(struct uart_port *port, struct tty_struct *tty) +{ + int saw_console_brk = 0; + int limit = 10000; + + while (limit-- > 0) { + unsigned long ra = __pa(con_read_page); + unsigned long bytes_read, i; + long stat = sun4v_con_read(ra, PAGE_SIZE, &bytes_read); + + if (stat != HV_EOK) { + bytes_read = 0; + + if (stat == CON_BREAK) { + if (uart_handle_break(port)) + continue; + saw_console_brk = 1; + *con_read_page = 0; + bytes_read = 1; + } else if (stat == CON_HUP) { + hung_up = 1; + uart_handle_dcd_change(port, 0); + continue; + } else { + /* HV_EWOULDBLOCK, etc. */ + break; + } + } + + if (hung_up) { + hung_up = 0; + uart_handle_dcd_change(port, 1); + } + + for (i = 0; i < bytes_read; i++) + uart_handle_sysrq_char(port, con_read_page[i]); + + if (tty == NULL) continue; - tty_insert_flip_char(tty, c, flag); + port->icount.rx += bytes_read; + + tty_insert_flip_string(tty, con_read_page, bytes_read); } - if (saw_console_brk) + return saw_console_brk; +} + +struct sunhv_ops { + void (*transmit_chars)(struct uart_port *port, struct circ_buf *xmit); + int (*receive_chars)(struct uart_port *port, struct tty_struct *tty); +}; + +static struct sunhv_ops bychar_ops = { + .transmit_chars = transmit_chars_putchar, + .receive_chars = receive_chars_getchar, +}; + +static struct sunhv_ops bywrite_ops = { + .transmit_chars = transmit_chars_write, + .receive_chars = receive_chars_read, +}; + +static struct sunhv_ops *sunhv_ops = &bychar_ops; + +static struct tty_struct *receive_chars(struct uart_port *port) +{ + struct tty_struct *tty = NULL; + + if (port->info != NULL) /* Unopened serial console */ + tty = port->info->tty; + + if (sunhv_ops->receive_chars(port, tty)) sun_do_break(); return tty; @@ -147,15 +204,7 @@ static void transmit_chars(struct uart_port *port) if (uart_circ_empty(xmit) || uart_tx_stopped(port)) return; - while (!uart_circ_empty(xmit)) { - long status = hypervisor_con_putchar(xmit->buf[xmit->tail]); - - if (status != HV_EOK) - break; - - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - port->icount.tx++; - } + sunhv_ops->transmit_chars(port, xmit); if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(port); @@ -212,7 +261,7 @@ static void sunhv_start_tx(struct uart_port *port) struct circ_buf *xmit = &port->info->xmit; while (!uart_circ_empty(xmit)) { - long status = hypervisor_con_putchar(xmit->buf[xmit->tail]); + long status = sun4v_con_putchar(xmit->buf[xmit->tail]); if (status != HV_EOK) break; @@ -231,9 +280,10 @@ static void sunhv_send_xchar(struct uart_port *port, char ch) spin_lock_irqsave(&port->lock, flags); while (limit-- > 0) { - long status = hypervisor_con_putchar(ch); + long status = sun4v_con_putchar(ch); if (status == HV_EOK) break; + udelay(1); } spin_unlock_irqrestore(&port->lock, flags); @@ -254,15 +304,15 @@ static void sunhv_break_ctl(struct uart_port *port, int break_state) { if (break_state) { unsigned long flags; - int limit = 1000000; + int limit = 10000; spin_lock_irqsave(&port->lock, flags); while (limit-- > 0) { - long status = hypervisor_con_putchar(CON_BREAK); + long status = sun4v_con_putchar(CON_BREAK); if (status == HV_EOK) break; - udelay(2); + udelay(1); } spin_unlock_irqrestore(&port->lock, flags); @@ -359,38 +409,99 @@ static struct uart_driver sunhv_reg = { static struct uart_port *sunhv_port; -static inline void sunhv_console_putchar(struct uart_port *port, char c) +/* Copy 's' into the con_write_page, decoding "\n" into + * "\r\n" along the way. We have to return two lengths + * because the caller needs to know how much to advance + * 's' and also how many bytes to output via con_write_page. + */ +static int fill_con_write_page(const char *s, unsigned int n, + unsigned long *page_bytes) +{ + const char *orig_s = s; + char *p = con_write_page; + int left = PAGE_SIZE; + + while (n--) { + if (*s == '\n') { + if (left < 2) + break; + *p++ = '\r'; + left--; + } else if (left < 1) + break; + *p++ = *s++; + left--; + } + *page_bytes = p - con_write_page; + return s - orig_s; +} + +static void sunhv_console_write_paged(struct console *con, const char *s, unsigned n) { + struct uart_port *port = sunhv_port; unsigned long flags; - int limit = 1000000; spin_lock_irqsave(&port->lock, flags); + while (n > 0) { + unsigned long ra = __pa(con_write_page); + unsigned long page_bytes; + unsigned int cpy = fill_con_write_page(s, n, + &page_bytes); + + n -= cpy; + s += cpy; + while (page_bytes > 0) { + unsigned long written; + int limit = 1000000; + + while (limit--) { + unsigned long stat; + + stat = sun4v_con_write(ra, page_bytes, + &written); + if (stat == HV_EOK) + break; + udelay(1); + } + if (limit <= 0) + break; + page_bytes -= written; + ra += written; + } + } + spin_unlock_irqrestore(&port->lock, flags); +} + +static inline void sunhv_console_putchar(struct uart_port *port, char c) +{ + int limit = 1000000; while (limit-- > 0) { - long status = hypervisor_con_putchar(c); + long status = sun4v_con_putchar(c); if (status == HV_EOK) break; - udelay(2); + udelay(1); } - - spin_unlock_irqrestore(&port->lock, flags); } -static void sunhv_console_write(struct console *con, const char *s, unsigned n) +static void sunhv_console_write_bychar(struct console *con, const char *s, unsigned n) { struct uart_port *port = sunhv_port; + unsigned long flags; int i; + spin_lock_irqsave(&port->lock, flags); for (i = 0; i < n; i++) { if (*s == '\n') sunhv_console_putchar(port, '\r'); sunhv_console_putchar(port, *s++); } + spin_unlock_irqrestore(&port->lock, flags); } static struct console sunhv_console = { .name = "ttyHV", - .write = sunhv_console_write, + .write = sunhv_console_write_bychar, .device = uart_console_device, .flags = CON_PRINTBUFFER, .index = -1, @@ -410,6 +521,7 @@ static inline struct console *SUNHV_CONSOLE(void) static int __devinit hv_probe(struct of_device *op, const struct of_device_id *match) { struct uart_port *port; + unsigned long minor; int err; if (op->irqs[0] == 0xffffffff) @@ -419,6 +531,22 @@ static int __devinit hv_probe(struct of_device *op, const struct of_device_id *m if (unlikely(!port)) return -ENOMEM; + minor = 1; + if (sun4v_hvapi_register(HV_GRP_CORE, 1, &minor) == 0 && + minor >= 1) { + err = -ENOMEM; + con_write_page = kzalloc(PAGE_SIZE, GFP_KERNEL); + if (!con_write_page) + goto out_free_port; + + con_read_page = kzalloc(PAGE_SIZE, GFP_KERNEL); + if (!con_read_page) + goto out_free_con_write_page; + + sunhv_console.write = sunhv_console_write_paged; + sunhv_ops = &bywrite_ops; + } + sunhv_port = port; port->line = 0; @@ -437,7 +565,7 @@ static int __devinit hv_probe(struct of_device *op, const struct of_device_id *m err = uart_register_driver(&sunhv_reg); if (err) - goto out_free_port; + goto out_free_con_read_page; sunhv_reg.tty_driver->name_base = sunhv_reg.minor - 64; sunserial_current_minor += 1; @@ -463,6 +591,12 @@ out_unregister_driver: sunserial_current_minor -= 1; uart_unregister_driver(&sunhv_reg); +out_free_con_read_page: + kfree(con_read_page); + +out_free_con_write_page: + kfree(con_write_page); + out_free_port: kfree(port); sunhv_port = NULL; diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c index 0985193dc57d1c..15b6e1cb040be5 100644 --- a/drivers/serial/sunzilog.c +++ b/drivers/serial/sunzilog.c @@ -1239,7 +1239,7 @@ static inline struct console *SUNZILOG_CONSOLE(void) #define SUNZILOG_CONSOLE() (NULL) #endif -static void __init sunzilog_init_kbdms(struct uart_sunzilog_port *up, int channel) +static void __devinit sunzilog_init_kbdms(struct uart_sunzilog_port *up, int channel) { int baud, brg; @@ -1259,7 +1259,7 @@ static void __init sunzilog_init_kbdms(struct uart_sunzilog_port *up, int channe } #ifdef CONFIG_SERIO -static void __init sunzilog_register_serio(struct uart_sunzilog_port *up) +static void __devinit sunzilog_register_serio(struct uart_sunzilog_port *up) { struct serio *serio = &up->serio; diff --git a/drivers/spi/mpc52xx_psc_spi.c b/drivers/spi/mpc52xx_psc_spi.c index 052359fc41ee61..11f36bef305749 100644 --- a/drivers/spi/mpc52xx_psc_spi.c +++ b/drivers/spi/mpc52xx_psc_spi.c @@ -329,8 +329,8 @@ static int mpc52xx_psc_spi_port_config(int psc_id, struct mpc52xx_psc_spi *mps) int ret = 0; #if defined(CONFIG_PPC_MERGE) - cdm = mpc52xx_find_and_map("mpc52xx-cdm"); - gpio = mpc52xx_find_and_map("mpc52xx-gpio"); + cdm = mpc52xx_find_and_map("mpc5200-cdm"); + gpio = mpc52xx_find_and_map("mpc5200-gpio"); #else cdm = ioremap(MPC52xx_PA(MPC52xx_CDM_OFFSET), MPC52xx_CDM_SIZE); gpio = ioremap(MPC52xx_PA(MPC52xx_GPIO_OFFSET), MPC52xx_GPIO_SIZE); @@ -445,9 +445,6 @@ static int __init mpc52xx_psc_spi_do_probe(struct device *dev, u32 regaddr, struct spi_master *master; int ret; - if (pdata == NULL) - return -ENODEV; - master = spi_alloc_master(dev, sizeof *mps); if (master == NULL) return -ENOMEM; @@ -594,17 +591,17 @@ static int __init mpc52xx_psc_spi_of_probe(struct of_device *op, } regaddr64 = of_translate_address(op->node, regaddr_p); + /* get PSC id (1..6, used by port_config) */ if (op->dev.platform_data == NULL) { - struct device_node *np; - int i = 0; + const u32 *psc_nump; - for_each_node_by_type(np, "spi") { - if (of_find_device_by_node(np) == op) { - id = i; - break; - } - i++; + psc_nump = of_get_property(op->node, "cell-index", NULL); + if (!psc_nump || *psc_nump > 5) { + printk(KERN_ERR "mpc52xx_psc_spi: Device node %s has invalid " + "cell-index property\n", op->node->full_name); + return -EINVAL; } + id = *psc_nump + 1; } return mpc52xx_psc_spi_do_probe(&op->dev, (u32)regaddr64, (u32)size64, @@ -617,7 +614,7 @@ static int __exit mpc52xx_psc_spi_of_remove(struct of_device *op) } static struct of_device_id mpc52xx_psc_spi_of_match[] = { - { .type = "spi", .compatible = "mpc52xx-psc-spi", }, + { .type = "spi", .compatible = "mpc5200-psc-spi", }, {}, }; diff --git a/drivers/spi/omap_uwire.c b/drivers/spi/omap_uwire.c index 96f62b2df300d2..95183e1df525c6 100644 --- a/drivers/spi/omap_uwire.c +++ b/drivers/spi/omap_uwire.c @@ -358,11 +358,11 @@ static int uwire_setup_transfer(struct spi_device *spi, struct spi_transfer *t) switch (spi->mode & (SPI_CPOL | SPI_CPHA)) { case SPI_MODE_0: case SPI_MODE_3: - flags |= UWIRE_WRITE_RISING_EDGE | UWIRE_READ_FALLING_EDGE; + flags |= UWIRE_WRITE_FALLING_EDGE | UWIRE_READ_RISING_EDGE; break; case SPI_MODE_1: case SPI_MODE_2: - flags |= UWIRE_WRITE_FALLING_EDGE | UWIRE_READ_RISING_EDGE; + flags |= UWIRE_WRITE_RISING_EDGE | UWIRE_READ_FALLING_EDGE; break; } diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c index ce3c0ce2316eed..7d2d9ec6cac31a 100644 --- a/drivers/spi/spi_bfin5xx.c +++ b/drivers/spi/spi_bfin5xx.c @@ -126,7 +126,7 @@ struct chip_data { u8 chip_select_num; u8 n_bytes; - u32 width; /* 0 or 1 */ + u8 width; /* 0 or 1 */ u8 enable_dma; u8 bits_per_word; /* 8 or 16 */ u8 cs_change_per_word; @@ -136,7 +136,7 @@ struct chip_data { void (*duplex) (struct driver_data *); }; -void bfin_spi_enable(struct driver_data *drv_data) +static void bfin_spi_enable(struct driver_data *drv_data) { u16 cr; @@ -145,7 +145,7 @@ void bfin_spi_enable(struct driver_data *drv_data) SSYNC(); } -void bfin_spi_disable(struct driver_data *drv_data) +static void bfin_spi_disable(struct driver_data *drv_data) { u16 cr; @@ -163,9 +163,6 @@ static u16 hz_to_spi_baud(u32 speed_hz) if ((sclk % (2 * speed_hz)) > 0) spi_baud++; - pr_debug("sclk = %ld, speed_hz = %d, spi_baud = %d\n", sclk, speed_hz, - spi_baud); - return spi_baud; } @@ -190,11 +187,12 @@ static void restore_state(struct driver_data *drv_data) /* Clear status and disable clock */ write_STAT(BIT_STAT_CLR); bfin_spi_disable(drv_data); - pr_debug("restoring spi ctl state\n"); + dev_dbg(&drv_data->pdev->dev, "restoring spi ctl state\n"); #if defined(CONFIG_BF534) || defined(CONFIG_BF536) || defined(CONFIG_BF537) - pr_debug("chip select number is %d\n", chip->chip_select_num); - + dev_dbg(&drv_data->pdev->dev, + "chip select number is %d\n", chip->chip_select_num); + switch (chip->chip_select_num) { case 1: bfin_write_PORTF_FER(bfin_read_PORTF_FER() | 0x3c00); @@ -280,7 +278,8 @@ static void null_reader(struct driver_data *drv_data) static void u8_writer(struct driver_data *drv_data) { - pr_debug("cr8-s is 0x%x\n", read_STAT()); + dev_dbg(&drv_data->pdev->dev, + "cr8-s is 0x%x\n", read_STAT()); while (drv_data->tx < drv_data->tx_end) { write_TDBR(*(u8 *) (drv_data->tx)); while (read_STAT() & BIT_STAT_TXS) @@ -318,7 +317,8 @@ static void u8_cs_chg_writer(struct driver_data *drv_data) static void u8_reader(struct driver_data *drv_data) { - pr_debug("cr-8 is 0x%x\n", read_STAT()); + dev_dbg(&drv_data->pdev->dev, + "cr-8 is 0x%x\n", read_STAT()); /* clear TDBR buffer before read(else it will be shifted out) */ write_TDBR(0xFFFF); @@ -404,7 +404,9 @@ static void u8_cs_chg_duplex(struct driver_data *drv_data) static void u16_writer(struct driver_data *drv_data) { - pr_debug("cr16 is 0x%x\n", read_STAT()); + dev_dbg(&drv_data->pdev->dev, + "cr16 is 0x%x\n", read_STAT()); + while (drv_data->tx < drv_data->tx_end) { write_TDBR(*(u16 *) (drv_data->tx)); while ((read_STAT() & BIT_STAT_TXS)) @@ -442,7 +444,8 @@ static void u16_cs_chg_writer(struct driver_data *drv_data) static void u16_reader(struct driver_data *drv_data) { - pr_debug("cr-16 is 0x%x\n", read_STAT()); + dev_dbg(&drv_data->pdev->dev, + "cr-16 is 0x%x\n", read_STAT()); dummy_read(); while (drv_data->rx < (drv_data->rx_end - 2)) { @@ -571,12 +574,12 @@ static void giveback(struct driver_data *drv_data) msg->complete(msg->context); } -static irqreturn_t dma_irq_handler(int irq, void *dev_id, struct pt_regs *regs) +static irqreturn_t dma_irq_handler(int irq, void *dev_id) { struct driver_data *drv_data = (struct driver_data *)dev_id; struct spi_message *msg = drv_data->cur_msg; - pr_debug("in dma_irq_handler\n"); + dev_dbg(&drv_data->pdev->dev, "in dma_irq_handler\n"); clear_dma_irqstat(CH_SPI); /* @@ -604,7 +607,9 @@ static irqreturn_t dma_irq_handler(int irq, void *dev_id, struct pt_regs *regs) tasklet_schedule(&drv_data->pump_transfers); /* free the irq handler before next transfer */ - pr_debug("disable dma channel irq%d\n", CH_SPI); + dev_dbg(&drv_data->pdev->dev, + "disable dma channel irq%d\n", + CH_SPI); dma_disable_irq(CH_SPI); return IRQ_HANDLED; @@ -617,7 +622,8 @@ static void pump_transfers(unsigned long data) struct spi_transfer *transfer = NULL; struct spi_transfer *previous = NULL; struct chip_data *chip = NULL; - u16 cr, width, dma_width, dma_config; + u8 width; + u16 cr, dma_width, dma_config; u32 tranf_success = 1; /* Get current state information */ @@ -662,8 +668,8 @@ static void pump_transfers(unsigned long data) if (transfer->tx_buf != NULL) { drv_data->tx = (void *)transfer->tx_buf; drv_data->tx_end = drv_data->tx + transfer->len; - pr_debug("tx_buf is %p, tx_end is %p\n", transfer->tx_buf, - drv_data->tx_end); + dev_dbg(&drv_data->pdev->dev, "tx_buf is %p, tx_end is %p\n", + transfer->tx_buf, drv_data->tx_end); } else { drv_data->tx = NULL; } @@ -671,8 +677,8 @@ static void pump_transfers(unsigned long data) if (transfer->rx_buf != NULL) { drv_data->rx = transfer->rx_buf; drv_data->rx_end = drv_data->rx + transfer->len; - pr_debug("rx_buf is %p, rx_end is %p\n", transfer->rx_buf, - drv_data->rx_end); + dev_dbg(&drv_data->pdev->dev, "rx_buf is %p, rx_end is %p\n", + transfer->rx_buf, drv_data->rx_end); } else { drv_data->rx = NULL; } @@ -690,9 +696,9 @@ static void pump_transfers(unsigned long data) drv_data->write = drv_data->tx ? chip->write : null_writer; drv_data->read = drv_data->rx ? chip->read : null_reader; drv_data->duplex = chip->duplex ? chip->duplex : null_writer; - pr_debug - ("transfer: drv_data->write is %p, chip->write is %p, null_wr is %p\n", - drv_data->write, chip->write, null_writer); + dev_dbg(&drv_data->pdev->dev, + "transfer: drv_data->write is %p, chip->write is %p, null_wr is %p\n", + drv_data->write, chip->write, null_writer); /* speed and width has been set on per message */ message->state = RUNNING_STATE; @@ -706,8 +712,9 @@ static void pump_transfers(unsigned long data) } write_FLAG(chip->flag); - pr_debug("now pumping a transfer: width is %d, len is %d\n", width, - transfer->len); + dev_dbg(&drv_data->pdev->dev, + "now pumping a transfer: width is %d, len is %d\n", + width, transfer->len); /* * Try to map dma buffer and do a dma transfer if @@ -722,7 +729,7 @@ static void pump_transfers(unsigned long data) bfin_spi_disable(drv_data); /* config dma channel */ - pr_debug("doing dma transfer\n"); + dev_dbg(&drv_data->pdev->dev, "doing dma transfer\n"); if (width == CFG_SPI_WORDSIZE16) { set_dma_x_count(CH_SPI, drv_data->len); set_dma_x_modify(CH_SPI, 2); @@ -738,7 +745,8 @@ static void pump_transfers(unsigned long data) /* dirty hack for autobuffer DMA mode */ if (drv_data->tx_dma == 0xFFFF) { - pr_debug("doing autobuffer DMA out.\n"); + dev_dbg(&drv_data->pdev->dev, + "doing autobuffer DMA out.\n"); /* no irq in autobuffer mode */ dma_config = @@ -758,7 +766,7 @@ static void pump_transfers(unsigned long data) /* In dma mode, rx or tx must be NULL in one transfer */ if (drv_data->rx != NULL) { /* set transfer mode, and enable SPI */ - pr_debug("doing DMA in.\n"); + dev_dbg(&drv_data->pdev->dev, "doing DMA in.\n"); /* disable SPI before write to TDBR */ write_CTRL(cr & ~BIT_CTL_ENABLE); @@ -781,7 +789,7 @@ static void pump_transfers(unsigned long data) /* set transfer mode, and enable SPI */ write_CTRL(cr); } else if (drv_data->tx != NULL) { - pr_debug("doing DMA out.\n"); + dev_dbg(&drv_data->pdev->dev, "doing DMA out.\n"); /* start dma */ dma_enable_irq(CH_SPI); @@ -796,7 +804,7 @@ static void pump_transfers(unsigned long data) } } else { /* IO mode write then read */ - pr_debug("doing IO transfer\n"); + dev_dbg(&drv_data->pdev->dev, "doing IO transfer\n"); write_STAT(BIT_STAT_CLR); @@ -804,11 +812,11 @@ static void pump_transfers(unsigned long data) /* full duplex mode */ BUG_ON((drv_data->tx_end - drv_data->tx) != (drv_data->rx_end - drv_data->rx)); - cr = (read_CTRL() & (~BIT_CTL_TIMOD)); /* clear the TIMOD bits */ - cr |= - CFG_SPI_WRITE | (width << 8) | (CFG_SPI_ENABLE << - 14); - pr_debug("IO duplex: cr is 0x%x\n", cr); + cr = (read_CTRL() & (~BIT_CTL_TIMOD)); + cr |= CFG_SPI_WRITE | (width << 8) | + (CFG_SPI_ENABLE << 14); + dev_dbg(&drv_data->pdev->dev, + "IO duplex: cr is 0x%x\n", cr); write_CTRL(cr); SSYNC(); @@ -819,11 +827,11 @@ static void pump_transfers(unsigned long data) tranf_success = 0; } else if (drv_data->tx != NULL) { /* write only half duplex */ - cr = (read_CTRL() & (~BIT_CTL_TIMOD)); /* clear the TIMOD bits */ - cr |= - CFG_SPI_WRITE | (width << 8) | (CFG_SPI_ENABLE << - 14); - pr_debug("IO write: cr is 0x%x\n", cr); + cr = (read_CTRL() & (~BIT_CTL_TIMOD)); + cr |= CFG_SPI_WRITE | (width << 8) | + (CFG_SPI_ENABLE << 14); + dev_dbg(&drv_data->pdev->dev, + "IO write: cr is 0x%x\n", cr); write_CTRL(cr); SSYNC(); @@ -834,11 +842,11 @@ static void pump_transfers(unsigned long data) tranf_success = 0; } else if (drv_data->rx != NULL) { /* read only half duplex */ - cr = (read_CTRL() & (~BIT_CTL_TIMOD)); /* cleare the TIMOD bits */ - cr |= - CFG_SPI_READ | (width << 8) | (CFG_SPI_ENABLE << - 14); - pr_debug("IO read: cr is 0x%x\n", cr); + cr = (read_CTRL() & (~BIT_CTL_TIMOD)); + cr |= CFG_SPI_READ | (width << 8) | + (CFG_SPI_ENABLE << 14); + dev_dbg(&drv_data->pdev->dev, + "IO read: cr is 0x%x\n", cr); write_CTRL(cr); SSYNC(); @@ -849,7 +857,8 @@ static void pump_transfers(unsigned long data) } if (!tranf_success) { - pr_debug("IO write error!\n"); + dev_dbg(&drv_data->pdev->dev, + "IO write error!\n"); message->state = ERROR_STATE; } else { /* Update total byte transfered */ @@ -899,11 +908,14 @@ static void pump_messages(struct work_struct *work) /* Setup the SSP using the per chip configuration */ drv_data->cur_chip = spi_get_ctldata(drv_data->cur_msg->spi); restore_state(drv_data); - pr_debug - ("got a message to pump, state is set to: baud %d, flag 0x%x, ctl 0x%x\n", - drv_data->cur_chip->baud, drv_data->cur_chip->flag, - drv_data->cur_chip->ctl_reg); - pr_debug("the first transfer len is %d\n", drv_data->cur_transfer->len); + dev_dbg(&drv_data->pdev->dev, + "got a message to pump, state is set to: baud %d, flag 0x%x, ctl 0x%x\n", + drv_data->cur_chip->baud, drv_data->cur_chip->flag, + drv_data->cur_chip->ctl_reg); + + dev_dbg(&drv_data->pdev->dev, + "the first transfer len is %d\n", + drv_data->cur_transfer->len); /* Mark as busy and launch transfers */ tasklet_schedule(&drv_data->pump_transfers); @@ -932,7 +944,7 @@ static int transfer(struct spi_device *spi, struct spi_message *msg) msg->status = -EINPROGRESS; msg->state = START_STATE; - pr_debug("adding an msg in transfer() \n"); + dev_dbg(&spi->dev, "adding an msg in transfer() \n"); list_add_tail(&msg->queue, &drv_data->queue); if (drv_data->run == QUEUE_RUNNING && !drv_data->busy) @@ -1002,13 +1014,13 @@ static int setup(struct spi_device *spi) if (chip->enable_dma && !dma_requested) { /* register dma irq handler */ if (request_dma(CH_SPI, "BF53x_SPI_DMA") < 0) { - pr_debug - ("Unable to request BlackFin SPI DMA channel\n"); + dev_dbg(&spi->dev, + "Unable to request BlackFin SPI DMA channel\n"); return -ENODEV; } if (set_dma_callback(CH_SPI, (void *)dma_irq_handler, drv_data) < 0) { - pr_debug("Unable to set dma callback\n"); + dev_dbg(&spi->dev, "Unable to set dma callback\n"); return -EPERM; } dma_disable_irq(CH_SPI); @@ -1054,9 +1066,9 @@ static int setup(struct spi_device *spi) return -ENODEV; } - pr_debug("setup spi chip %s, width is %d, dma is %d,", + dev_dbg(&spi->dev, "setup spi chip %s, width is %d, dma is %d,", spi->modalias, chip->width, chip->enable_dma); - pr_debug("ctl_reg is 0x%x, flag_reg is 0x%x\n", + dev_dbg(&spi->dev, "ctl_reg is 0x%x, flag_reg is 0x%x\n", chip->ctl_reg, chip->flag); spi_set_ctldata(spi, chip); @@ -1068,7 +1080,7 @@ static int setup(struct spi_device *spi) * callback for spi framework. * clean driver specific data */ -static void cleanup(const struct spi_device *spi) +static void cleanup(struct spi_device *spi) { struct chip_data *chip = spi_get_ctldata((struct spi_device *)spi); @@ -1207,7 +1219,7 @@ static int __init bfin5xx_spi_probe(struct platform_device *pdev) dev_err(&pdev->dev, "problem registering spi master\n"); goto out_error_queue_alloc; } - pr_debug("controller probe successfully\n"); + dev_dbg(&pdev->dev, "controller probe successfully\n"); return status; out_error_queue_alloc: @@ -1287,27 +1299,23 @@ static int bfin5xx_spi_resume(struct platform_device *pdev) #endif /* CONFIG_PM */ static struct platform_driver bfin5xx_spi_driver = { - .driver = { - .name = "bfin-spi-master", - .bus = &platform_bus_type, - .owner = THIS_MODULE, - }, - .probe = bfin5xx_spi_probe, - .remove = __devexit_p(bfin5xx_spi_remove), - .suspend = bfin5xx_spi_suspend, - .resume = bfin5xx_spi_resume, + .driver = { + .name = "bfin-spi-master", + .owner = THIS_MODULE, + }, + .suspend = bfin5xx_spi_suspend, + .resume = bfin5xx_spi_resume, + .remove = __devexit_p(bfin5xx_spi_remove), }; static int __init bfin5xx_spi_init(void) { - return platform_driver_register(&bfin5xx_spi_driver); + return platform_driver_probe(&bfin5xx_spi_driver, bfin5xx_spi_probe); } - module_init(bfin5xx_spi_init); static void __exit bfin5xx_spi_exit(void) { platform_driver_unregister(&bfin5xx_spi_driver); } - module_exit(bfin5xx_spi_exit); diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c index c0a6dce800a36e..d04242aee40dd6 100644 --- a/drivers/spi/spidev.c +++ b/drivers/spi/spidev.c @@ -168,6 +168,12 @@ static int spidev_message(struct spidev_data *spidev, n--, k_tmp++, u_tmp++) { k_tmp->len = u_tmp->len; + total += k_tmp->len; + if (total > bufsiz) { + status = -EMSGSIZE; + goto done; + } + if (u_tmp->rx_buf) { k_tmp->rx_buf = buf; if (!access_ok(VERIFY_WRITE, u_tmp->rx_buf, u_tmp->len)) @@ -179,12 +185,6 @@ static int spidev_message(struct spidev_data *spidev, u_tmp->len)) goto done; } - - total += k_tmp->len; - if (total > bufsiz) { - status = -EMSGSIZE; - goto done; - } buf += k_tmp->len; k_tmp->cs_change = !!u_tmp->cs_change; @@ -364,6 +364,7 @@ spidev_ioctl(struct inode *inode, struct file *filp, break; } if (__copy_from_user(ioc, (void __user *)arg, tmp)) { + kfree(ioc); retval = -EFAULT; break; } @@ -484,7 +485,7 @@ static int spidev_probe(struct spi_device *spi) * Reusing minors is fine so long as udev or mdev is working. */ mutex_lock(&device_list_lock); - minor = find_first_zero_bit(minors, ARRAY_SIZE(minors)); + minor = find_first_zero_bit(minors, N_SPI_MINORS); if (minor < N_SPI_MINORS) { spidev->dev.parent = &spi->dev; spidev->dev.class = &spidev_class; diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c index 15e740e3a5c47c..7b1edfe46b28b5 100644 --- a/drivers/usb/class/usblp.c +++ b/drivers/usb/class/usblp.c @@ -1003,7 +1003,7 @@ abort: usblp->writebuf, usblp->writeurb->transfer_dma); if (usblp->readbuf) usb_buffer_free (usblp->dev, USBLP_BUF_SIZE, - usblp->readbuf, usblp->writeurb->transfer_dma); + usblp->readbuf, usblp->readurb->transfer_dma); kfree(usblp->statusbuf); kfree(usblp->device_id_string); usb_free_urb(usblp->writeurb); diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c index bfb3731d42db81..2d4fd530e5e448 100644 --- a/drivers/usb/core/config.c +++ b/drivers/usb/core/config.c @@ -185,10 +185,12 @@ static int usb_parse_interface(struct device *ddev, int cfgno, num_ep = USB_MAXENDPOINTS; } - len = sizeof(struct usb_host_endpoint) * num_ep; - alt->endpoint = kzalloc(len, GFP_KERNEL); - if (!alt->endpoint) - return -ENOMEM; + if (num_ep > 0) { /* Can't allocate 0 bytes */ + len = sizeof(struct usb_host_endpoint) * num_ep; + alt->endpoint = kzalloc(len, GFP_KERNEL); + if (!alt->endpoint) + return -ENOMEM; + } /* Parse all the endpoint descriptors */ n = 0; diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index b9f7f90aef8270..2619986e53000f 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -983,7 +983,10 @@ static int autosuspend_check(struct usb_device *udev) #else -#define autosuspend_check(udev) 0 +static inline int autosuspend_check(struct usb_device *udev) +{ + return 0; +} #endif /* CONFIG_USB_SUSPEND */ @@ -1041,7 +1044,6 @@ static int usb_suspend_both(struct usb_device *udev, pm_message_t msg) if (status < 0) goto done; } - cancel_delayed_work(&udev->autosuspend); /* Suspend all the interfaces and then udev itself */ if (udev->actconfig) { @@ -1062,9 +1064,16 @@ static int usb_suspend_both(struct usb_device *udev, pm_message_t msg) usb_resume_interface(intf); } + /* Try another autosuspend when the interfaces aren't busy */ + if (udev->auto_pm) + autosuspend_check(udev); + /* If the suspend succeeded, propagate it up the tree */ - } else if (parent) - usb_autosuspend_device(parent); + } else { + cancel_delayed_work(&udev->autosuspend); + if (parent) + usb_autosuspend_device(parent); + } done: // dev_dbg(&udev->dev, "%s: status %d\n", __FUNCTION__, status); @@ -1475,6 +1484,7 @@ int usb_external_resume_device(struct usb_device *udev) usb_pm_lock(udev); udev->auto_pm = 0; status = usb_resume_both(udev); + udev->last_busy = jiffies; usb_pm_unlock(udev); /* Now that the device is awake, we can start trying to autosuspend diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 40cf882293e64d..8969e42434b9ca 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1018,8 +1018,8 @@ done: atomic_dec (&urb->use_count); if (urb->reject) wake_up (&usb_kill_urb_queue); - usb_put_urb (urb); usbmon_urb_submit_error(&hcd->self, urb, status); + usb_put_urb (urb); } return status; } @@ -1175,10 +1175,6 @@ void usb_hcd_endpoint_disable (struct usb_device *udev, struct urb *urb; hcd = bus_to_hcd(udev->bus); - - WARN_ON (!HC_IS_RUNNING (hcd->state) && hcd->state != HC_STATE_HALT && - udev->state != USB_STATE_NOTATTACHED); - local_irq_disable (); /* ep is already gone from udev->ep_{in,out}[]; no more submits */ @@ -1685,7 +1681,7 @@ void usb_remove_hcd(struct usb_hcd *hcd) spin_unlock_irq (&hcd_root_hub_lock); #ifdef CONFIG_PM - flush_workqueue(ksuspend_usb_wq); + cancel_work_sync(&hcd->wakeup_work); #endif mutex_lock(&usb_bus_list_lock); diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index f6b74a678de51f..24f10a19dbdbc1 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1158,6 +1158,30 @@ static void release_address(struct usb_device *udev) } } +#ifdef CONFIG_USB_SUSPEND + +static void usb_stop_pm(struct usb_device *udev) +{ + /* Synchronize with the ksuspend thread to prevent any more + * autosuspend requests from being submitted, and decrement + * the parent's count of unsuspended children. + */ + usb_pm_lock(udev); + if (udev->parent && !udev->discon_suspended) + usb_autosuspend_device(udev->parent); + usb_pm_unlock(udev); + + /* Stop any autosuspend requests already submitted */ + cancel_rearming_delayed_work(&udev->autosuspend); +} + +#else + +static inline void usb_stop_pm(struct usb_device *udev) +{ } + +#endif + /** * usb_disconnect - disconnect a device (usbcore-internal) * @pdev: pointer to device being disconnected @@ -1224,13 +1248,7 @@ void usb_disconnect(struct usb_device **pdev) *pdev = NULL; spin_unlock_irq(&device_state_lock); - /* Decrement the parent's count of unsuspended children */ - if (udev->parent) { - usb_pm_lock(udev); - if (!udev->discon_suspended) - usb_autosuspend_device(udev->parent); - usb_pm_unlock(udev); - } + usb_stop_pm(udev); put_device(&udev->dev); } @@ -2201,14 +2219,9 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, continue; } - /* Use a short timeout the first time through, - * so that recalcitrant full-speed devices with - * 8- or 16-byte ep0-maxpackets won't slow things - * down tremendously by NAKing the unexpectedly - * early status stage. Also, retry on all errors; - * some devices are flakey. - * 255 is for WUSB devices, we actually need to use 512. - * WUSB1.0[4.8.1]. + /* Retry on all errors; some devices are flakey. + * 255 is for WUSB devices, we actually need to use + * 512 (WUSB1.0[4.8.1]). */ for (j = 0; j < 3; ++j) { buf->bMaxPacketSize0 = 0; @@ -2216,7 +2229,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, USB_REQ_GET_DESCRIPTOR, USB_DIR_IN, USB_DT_DEVICE << 8, 0, buf, GET_DESCRIPTOR_BUFSIZE, - (i ? USB_CTRL_GET_TIMEOUT : 1000)); + USB_CTRL_GET_TIMEOUT); switch (buf->bMaxPacketSize0) { case 8: case 16: case 32: case 64: case 255: if (buf->bDescriptorType == @@ -2426,10 +2439,10 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, if (portchange & USB_PORT_STAT_C_CONNECTION) { status = hub_port_debounce(hub, port1); - if (status < 0 && printk_ratelimit()) { - dev_err (hub_dev, - "connect-debounce failed, port %d disabled\n", - port1); + if (status < 0) { + if (printk_ratelimit()) + dev_err (hub_dev, "connect-debounce failed, " + "port %d disabled\n", port1); goto done; } portstatus = status; diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index b7434787db5fb3..f9fed34bf7d8b3 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -221,15 +221,10 @@ int usb_bulk_msg(struct usb_device *usb_dev, unsigned int pipe, if ((ep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT) { - int interval; - - if (usb_dev->speed == USB_SPEED_HIGH) - interval = 1 << min(15, ep->desc.bInterval - 1); - else - interval = ep->desc.bInterval; pipe = (pipe & ~(3 << 30)) | (PIPE_INTERRUPT << 30); usb_fill_int_urb(urb, usb_dev, pipe, data, len, - usb_api_blocking_completion, NULL, interval); + usb_api_blocking_completion, NULL, + ep->desc.bInterval); } else usb_fill_bulk_urb(urb, usb_dev, pipe, data, len, usb_api_blocking_completion, NULL); diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index e7c982377488fc..be37c863fdfb18 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -232,12 +232,15 @@ set_level(struct device *dev, struct device_attribute *attr, int len = count; char *cp; int rc = 0; + int old_autosuspend_disabled, old_autoresume_disabled; cp = memchr(buf, '\n', count); if (cp) len = cp - buf; usb_lock_device(udev); + old_autosuspend_disabled = udev->autosuspend_disabled; + old_autoresume_disabled = udev->autoresume_disabled; /* Setting the flags without calling usb_pm_lock is a subject to * races, but who cares... @@ -263,6 +266,10 @@ set_level(struct device *dev, struct device_attribute *attr, } else rc = -EINVAL; + if (rc) { + udev->autosuspend_disabled = old_autosuspend_disabled; + udev->autoresume_disabled = old_autoresume_disabled; + } usb_unlock_device(udev); return (rc < 0 ? rc : count); } diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index 18ddc5e67e3909..4a6299bd004781 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -184,10 +184,6 @@ static void usb_release_dev(struct device *dev) udev = to_usb_device(dev); -#ifdef CONFIG_USB_SUSPEND - cancel_delayed_work(&udev->autosuspend); - flush_workqueue(ksuspend_usb_wq); -#endif usb_destroy_configuration(udev); usb_put_hcd(bus_to_hcd(udev->bus)); kfree(udev->product); @@ -205,7 +201,11 @@ struct device_type usb_device_type = { static int ksuspend_usb_init(void) { - ksuspend_usb_wq = create_singlethread_workqueue("ksuspend_usbd"); + /* This workqueue is supposed to be both freezable and + * singlethreaded. Its job doesn't justify running on more + * than one CPU. + */ + ksuspend_usb_wq = create_freezeable_workqueue("ksuspend_usbd"); if (!ksuspend_usb_wq) return -ENOMEM; return 0; diff --git a/drivers/usb/gadget/fsl_usb2_udc.c b/drivers/usb/gadget/fsl_usb2_udc.c index 157054ea397869..3ca2b3159f00d8 100644 --- a/drivers/usb/gadget/fsl_usb2_udc.c +++ b/drivers/usb/gadget/fsl_usb2_udc.c @@ -228,13 +228,15 @@ static int dr_controller_setup(struct fsl_udc *udc) /* Config PHY interface */ portctrl = fsl_readl(&dr_regs->portsc1); - portctrl &= ~PORTSCX_PHY_TYPE_SEL; + portctrl &= ~(PORTSCX_PHY_TYPE_SEL & PORTSCX_PORT_WIDTH); switch (udc->phy_mode) { case FSL_USB2_PHY_ULPI: portctrl |= PORTSCX_PTS_ULPI; break; - case FSL_USB2_PHY_UTMI: case FSL_USB2_PHY_UTMI_WIDE: + portctrl |= PORTSCX_PTW_16BIT; + /* fall through */ + case FSL_USB2_PHY_UTMI: portctrl |= PORTSCX_PTS_UTMI; break; case FSL_USB2_PHY_SERIAL: @@ -625,7 +627,7 @@ static void fsl_free_buffer(struct usb_ep *_ep, void *buf, struct fsl_ep *ep; if (!_ep) - return NULL; + return; ep = container_of(_ep, struct fsl_ep, ep); diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index a52480505f78fa..c7a7c590426fd2 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -193,6 +193,19 @@ static void mpc83xx_usb_setup(struct usb_hcd *hcd) out_be32(non_ehci + FSL_SOC_USB_CTRL, 0x00000004); out_be32(non_ehci + FSL_SOC_USB_SNOOP1, 0x0000001b); +#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) + /* + * Turn on cache snooping hardware, since some PowerPC platforms + * wholly rely on hardware to deal with cache coherent + */ + + /* Setup Snooping for all the 4GB space */ + /* SNOOP1 starts from 0x0, size 2G */ + out_be32(non_ehci + FSL_SOC_USB_SNOOP1, 0x0 | SNOOP_SIZE_2GB); + /* SNOOP2 starts from 0x80000000, size 2G */ + out_be32(non_ehci + FSL_SOC_USB_SNOOP2, 0x80000000 | SNOOP_SIZE_2GB); +#endif + if (pdata->operating_mode == FSL_USB2_DR_HOST) mpc83xx_setup_phy(ehci, pdata->phy_mode, 0); diff --git a/drivers/usb/host/ehci-fsl.h b/drivers/usb/host/ehci-fsl.h index f28736a917e461..b5e59db53347fa 100644 --- a/drivers/usb/host/ehci-fsl.h +++ b/drivers/usb/host/ehci-fsl.h @@ -34,4 +34,5 @@ #define FSL_SOC_USB_PRICTRL 0x40c /* NOTE: big-endian */ #define FSL_SOC_USB_SICTRL 0x410 /* NOTE: big-endian */ #define FSL_SOC_USB_CTRL 0x500 /* NOTE: big-endian */ +#define SNOOP_SIZE_2GB 0x1e #endif /* _EHCI_FSL_H */ diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c index 79705609fd0c4c..ca62cb583221a8 100644 --- a/drivers/usb/host/ohci-pci.c +++ b/drivers/usb/host/ohci-pci.c @@ -137,7 +137,7 @@ static const struct pci_device_id ohci_pci_quirks[] = { /* Toshiba portege 4000 */ .vendor = PCI_VENDOR_ID_AL, .device = 0x5237, - .subvendor = PCI_VENDOR_ID_TOSHIBA_2, + .subvendor = PCI_VENDOR_ID_TOSHIBA, .subdevice = 0x0004, .driver_data = (unsigned long) broken_suspend, }, diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index 20861650905e63..c225159ca3d346 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -44,6 +44,7 @@ #define EHCI_USBSTS 4 /* status register */ #define EHCI_USBSTS_HALTED (1 << 12) /* HCHalted bit */ #define EHCI_USBINTR 8 /* interrupt register */ +#define EHCI_CONFIGFLAG 0x40 /* configured flag register */ #define EHCI_USBLEGSUP 0 /* legacy support register */ #define EHCI_USBLEGSUP_BIOS (1 << 16) /* BIOS semaphore */ #define EHCI_USBLEGSUP_OS (1 << 24) /* OS semaphore */ @@ -216,6 +217,7 @@ static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev) u32 hcc_params, val; u8 offset, cap_length; int count = 256/4; + int tried_handoff = 0; if (!mmio_resource_enabled(pdev, 0)) return; @@ -273,6 +275,7 @@ static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev) */ msec = 5000; while ((cap & EHCI_USBLEGSUP_BIOS) && (msec > 0)) { + tried_handoff = 1; msleep(10); msec -= 10; pci_read_config_dword(pdev, offset, &cap); @@ -292,6 +295,12 @@ static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev) pci_write_config_dword(pdev, offset + EHCI_USBLEGCTLSTS, 0); + + /* If the BIOS ever owned the controller then we + * can't expect any power sessions to remain intact. + */ + if (tried_handoff) + writel(0, op_reg_base + EHCI_CONFIGFLAG); break; case 0: /* illegal reserved capability */ cap = 0; diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c index ff0dba01f1c7d2..e98df2ee990131 100644 --- a/drivers/usb/host/u132-hcd.c +++ b/drivers/usb/host/u132-hcd.c @@ -57,6 +57,13 @@ #include <asm/system.h> #include <asm/byteorder.h> #include "../core/hcd.h" + + /* FIXME ohci.h is ONLY for internal use by the OHCI driver. + * If you're going to try stuff like this, you need to split + * out shareable stuff (register declarations?) into its own + * file, maybe name <linux/usb/ohci.h> + */ + #include "ohci.h" #define OHCI_CONTROL_INIT OHCI_CTRL_CBSR #define OHCI_INTR_INIT (OHCI_INTR_MIE | OHCI_INTR_UE | OHCI_INTR_RD | \ @@ -173,11 +180,6 @@ struct u132_ring { struct u132_endp *curr_endp; struct delayed_work scheduler; }; -#define OHCI_QUIRK_AMD756 0x01 -#define OHCI_QUIRK_SUPERIO 0x02 -#define OHCI_QUIRK_INITRESET 0x04 -#define OHCI_BIG_ENDIAN 0x08 -#define OHCI_QUIRK_ZFMICRO 0x10 struct u132 { struct kref kref; struct list_head u132_list; diff --git a/drivers/usb/misc/auerswald.c b/drivers/usb/misc/auerswald.c index 88fb56d5db8f8c..cac1500cba62b8 100644 --- a/drivers/usb/misc/auerswald.c +++ b/drivers/usb/misc/auerswald.c @@ -1822,16 +1822,10 @@ static int auerchar_release (struct inode *inode, struct file *file) pauerswald_t cp; dbg("release"); - /* get the mutexes */ - if (down_interruptible (&ccp->mutex)) { - return -ERESTARTSYS; - } + down(&ccp->mutex); cp = ccp->auerdev; if (cp) { - if (down_interruptible (&cp->mutex)) { - up (&ccp->mutex); - return -ERESTARTSYS; - } + down(&cp->mutex); /* remove an open service */ auerswald_removeservice (cp, &ccp->scontext); /* detach from device */ diff --git a/drivers/usb/misc/ftdi-elan.c b/drivers/usb/misc/ftdi-elan.c index e2172e5cf1528d..e0f122e131d720 100644 --- a/drivers/usb/misc/ftdi-elan.c +++ b/drivers/usb/misc/ftdi-elan.c @@ -73,6 +73,13 @@ static struct list_head ftdi_static_list; #include "usb_u132.h" #include <asm/io.h> #include "../core/hcd.h" + + /* FIXME ohci.h is ONLY for internal use by the OHCI driver. + * If you're going to try stuff like this, you need to split + * out shareable stuff (register declarations?) into its own + * file, maybe name <linux/usb/ohci.h> + */ + #include "../host/ohci.h" /* Define these values to match your devices*/ #define USB_FTDI_ELAN_VENDOR_ID 0x0403 @@ -2300,10 +2307,7 @@ static int ftdi_elan_checkingPCI(struct usb_ftdi *ftdi) offsetof(struct ohci_regs, member), 0, data); #define ftdi_write_pcimem(ftdi, member, data) ftdi_elan_write_pcimem(ftdi, \ offsetof(struct ohci_regs, member), 0, data); -#define OHCI_QUIRK_AMD756 0x01 -#define OHCI_QUIRK_SUPERIO 0x02 -#define OHCI_QUIRK_INITRESET 0x04 -#define OHCI_BIG_ENDIAN 0x08 + #define OHCI_CONTROL_INIT OHCI_CTRL_CBSR #define OHCI_INTR_INIT (OHCI_INTR_MIE | OHCI_INTR_UE | OHCI_INTR_RD | \ OHCI_INTR_WDH) diff --git a/drivers/usb/misc/ldusb.c b/drivers/usb/misc/ldusb.c index 11555bde655bf1..7bad494047621a 100644 --- a/drivers/usb/misc/ldusb.c +++ b/drivers/usb/misc/ldusb.c @@ -165,6 +165,8 @@ struct ld_usb { size_t interrupt_in_endpoint_size; int interrupt_in_running; int interrupt_in_done; + int buffer_overflow; + spinlock_t rbsl; char* interrupt_out_buffer; struct usb_endpoint_descriptor* interrupt_out_endpoint; @@ -230,10 +232,12 @@ static void ld_usb_interrupt_in_callback(struct urb *urb) } else { dbg_info(&dev->intf->dev, "%s: nonzero status received: %d\n", __FUNCTION__, urb->status); + spin_lock(&dev->rbsl); goto resubmit; /* maybe we can recover */ } } + spin_lock(&dev->rbsl); if (urb->actual_length > 0) { next_ring_head = (dev->ring_head+1) % ring_buffer_size; if (next_ring_head != dev->ring_tail) { @@ -244,21 +248,25 @@ static void ld_usb_interrupt_in_callback(struct urb *urb) dev->ring_head = next_ring_head; dbg_info(&dev->intf->dev, "%s: received %d bytes\n", __FUNCTION__, urb->actual_length); - } else + } else { dev_warn(&dev->intf->dev, "Ring buffer overflow, %d bytes dropped\n", urb->actual_length); + dev->buffer_overflow = 1; + } } resubmit: /* resubmit if we're still running */ - if (dev->interrupt_in_running && dev->intf) { + if (dev->interrupt_in_running && !dev->buffer_overflow && dev->intf) { retval = usb_submit_urb(dev->interrupt_in_urb, GFP_ATOMIC); - if (retval) + if (retval) { dev_err(&dev->intf->dev, "usb_submit_urb failed (%d)\n", retval); + dev->buffer_overflow = 1; + } } - + spin_unlock(&dev->rbsl); exit: dev->interrupt_in_done = 1; wake_up_interruptible(&dev->read_wait); @@ -330,6 +338,7 @@ static int ld_usb_open(struct inode *inode, struct file *file) /* initialize in direction */ dev->ring_head = 0; dev->ring_tail = 0; + dev->buffer_overflow = 0; usb_fill_int_urb(dev->interrupt_in_urb, interface_to_usbdev(interface), usb_rcvintpipe(interface_to_usbdev(interface), @@ -439,6 +448,7 @@ static ssize_t ld_usb_read(struct file *file, char __user *buffer, size_t count, size_t *actual_buffer; size_t bytes_to_read; int retval = 0; + int rv; dev = file->private_data; @@ -460,7 +470,10 @@ static ssize_t ld_usb_read(struct file *file, char __user *buffer, size_t count, } /* wait for data */ + spin_lock_irq(&dev->rbsl); if (dev->ring_head == dev->ring_tail) { + dev->interrupt_in_done = 0; + spin_unlock_irq(&dev->rbsl); if (file->f_flags & O_NONBLOCK) { retval = -EAGAIN; goto unlock_exit; @@ -468,6 +481,8 @@ static ssize_t ld_usb_read(struct file *file, char __user *buffer, size_t count, retval = wait_event_interruptible(dev->read_wait, dev->interrupt_in_done); if (retval < 0) goto unlock_exit; + } else { + spin_unlock_irq(&dev->rbsl); } /* actual_buffer contains actual_length + interrupt_in_buffer */ @@ -486,6 +501,17 @@ static ssize_t ld_usb_read(struct file *file, char __user *buffer, size_t count, retval = bytes_to_read; + spin_lock_irq(&dev->rbsl); + if (dev->buffer_overflow) { + dev->buffer_overflow = 0; + spin_unlock_irq(&dev->rbsl); + rv = usb_submit_urb(dev->interrupt_in_urb, GFP_KERNEL); + if (rv < 0) + dev->buffer_overflow = 1; + } else { + spin_unlock_irq(&dev->rbsl); + } + unlock_exit: /* unlock the device */ up(&dev->sem); @@ -635,6 +661,7 @@ static int ld_usb_probe(struct usb_interface *intf, const struct usb_device_id * goto exit; } init_MUTEX(&dev->sem); + spin_lock_init(&dev->rbsl); dev->intf = intf; init_waitqueue_head(&dev->read_wait); init_waitqueue_head(&dev->write_wait); diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c index ea2175bb227460..fe437125f14bc9 100644 --- a/drivers/usb/serial/ark3116.c +++ b/drivers/usb/serial/ark3116.c @@ -63,7 +63,8 @@ static inline void ARK3116_RCV(struct usb_serial *serial, int seq, request, requesttype, value, index, buf, 0x0000001, 1000); if (result) - dbg("%03d < %d bytes [0x%02X]", seq, result, buf[0]); + dbg("%03d < %d bytes [0x%02X]", seq, result, + ((unsigned char *)buf)[0]); else dbg("%03d < 0 bytes", seq); } diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 95a1805b064ff6..2353679f601ebb 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -273,12 +273,18 @@ static __u16 product; /* struct ftdi_sio_quirk is used by devices requiring special attention. */ struct ftdi_sio_quirk { + int (*probe)(struct usb_serial *); void (*setup)(struct usb_serial *); /* Special settings during startup. */ }; +static int ftdi_olimex_probe (struct usb_serial *serial); static void ftdi_USB_UIRT_setup (struct usb_serial *serial); static void ftdi_HE_TIRA1_setup (struct usb_serial *serial); +static struct ftdi_sio_quirk ftdi_olimex_quirk = { + .probe = ftdi_olimex_probe, +}; + static struct ftdi_sio_quirk ftdi_USB_UIRT_quirk = { .setup = ftdi_USB_UIRT_setup, }; @@ -319,6 +325,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_8U2232C_PID) }, { USB_DEVICE(FTDI_VID, FTDI_MICRO_CHAMELEON_PID) }, { USB_DEVICE(FTDI_VID, FTDI_RELAIS_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_PID) }, { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) }, { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) }, { USB_DEVICE(FTDI_VID, FTDI_XF_632_PID) }, @@ -525,6 +532,9 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13U_PID) }, { USB_DEVICE(ELEKTOR_VID, ELEKTOR_FT323R_PID) }, { USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) }, + { USB_DEVICE(OLIMEX_VID, OLIMEX_ARM_USB_OCD_PID), + .driver_info = (kernel_ulong_t)&ftdi_olimex_quirk }, { }, /* Optional parameter entry */ { } /* Terminating entry */ }; @@ -669,7 +679,7 @@ static struct usb_serial_driver ftdi_sio_device = { /* * *************************************************************************** - * Utlity functions + * Utility functions * *************************************************************************** */ @@ -1171,9 +1181,17 @@ static void remove_sysfs_attrs(struct usb_serial_port *port) /* Probe function to check for special devices */ static int ftdi_sio_probe (struct usb_serial *serial, const struct usb_device_id *id) { + struct ftdi_sio_quirk *quirk = (struct ftdi_sio_quirk *)id->driver_info; + + if (quirk && quirk->probe) { + int ret = quirk->probe(serial); + if (ret != 0) + return ret; + } + usb_set_serial_data(serial, (void *)id->driver_info); - return (0); + return 0; } static int ftdi_sio_port_probe(struct usb_serial_port *port) @@ -1268,6 +1286,24 @@ static void ftdi_HE_TIRA1_setup (struct usb_serial *serial) priv->force_rtscts = 1; } /* ftdi_HE_TIRA1_setup */ +/* + * First port on Olimex arm-usb-ocd is reserved for JTAG interface + * and can be accessed from userspace using openocd. + */ +static int ftdi_olimex_probe(struct usb_serial *serial) +{ + struct usb_device *udev = serial->dev; + struct usb_interface *interface = serial->interface; + + dbg("%s",__FUNCTION__); + + if (interface == udev->actconfig->interface[0]) { + info("Ignoring reserved serial port on Olimex arm-usb-ocd\n"); + return -ENODEV; + } + + return 0; +} /* ftdi_shutdown is called from usbserial:usb_serial_disconnect * it is called when the usb device is disconnected diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index 77ad0a09b3849d..33aee904724288 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -60,6 +60,9 @@ /* DMX4ALL DMX Interfaces */ #define FTDI_DMX4ALL 0xC850 +/* OpenDCC (www.opendcc.de) product id */ +#define FTDI_OPENDCC_PID 0xBFD8 + /* www.crystalfontz.com devices - thanx for providing free devices for evaluation ! */ /* they use the ftdi chipset for the USB interface and the vendor id is the same */ #define FTDI_XF_632_PID 0xFC08 /* 632: 16x2 Character Display */ @@ -518,6 +521,15 @@ #define FTDI_IBS_PEDO_PID 0xff3e /* IBS PEDO-Modem (RF modem 868.35 MHz) */ #define FTDI_IBS_PROD_PID 0xff3f /* future device */ +/* + * MaxStream devices www.maxstream.net + */ +#define FTDI_MAXSTREAM_PID 0xEE18 /* Xbee PKG-U Module */ + +/* Olimex */ +#define OLIMEX_VID 0x15BA +#define OLIMEX_ARM_USB_OCD_PID 0x0003 + /* Commands */ #define FTDI_SIO_RESET 0 /* Reset the port */ #define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */ diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 2366e7b63ece56..36620c651079cc 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -769,11 +769,6 @@ static void mos7840_bulk_out_data_callback(struct urb *urb) return; } - if (!mos7840_port) { - dbg("%s", "NULL mos7840_port pointer \n"); - return; - } - if (mos7840_port_paranoia_check(mos7840_port->port, __FUNCTION__)) { dbg("%s", "Port Paranoia failed \n"); return; diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c index 4adfab988e8663..00afc1712c3913 100644 --- a/drivers/usb/serial/omninet.c +++ b/drivers/usb/serial/omninet.c @@ -165,12 +165,10 @@ static int omninet_open (struct usb_serial_port *port, struct file *filp) { struct usb_serial *serial = port->serial; struct usb_serial_port *wport; - struct omninet_data *od = usb_get_serial_port_data(port); int result = 0; dbg("%s - port %d", __FUNCTION__, port->number); - od = kmalloc( sizeof(struct omninet_data), GFP_KERNEL ); wport = serial->port[1]; wport->tty = port->tty; diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 8c3f55b080b4e1..89f067d9507690 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -165,7 +165,6 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x1410) }, /* Novatel U740 */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x1420) }, /* Novatel EU870 */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x1430) }, /* Novatel Merlin XU870 HSDPA/3G */ - { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x1430) }, /* Novatel XU870 */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x2100) }, /* Novatel EV620 CDMA/EV-DO */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x2110) }, /* Novatel Merlin ES620 / Merlin ES720 / Ovation U720 */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x2130) }, /* Novatel Merlin ES620 SM Bus */ diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 644607de4c11a6..ac1829c6e8f02d 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -35,6 +35,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x1199, 0x0218) }, /* Sierra Wireless MC5720 */ { USB_DEVICE(0x1199, 0x0020) }, /* Sierra Wireless MC5725 */ { USB_DEVICE(0x1199, 0x0019) }, /* Sierra Wireless AirCard 595 */ + { USB_DEVICE(0x1199, 0x0120) }, /* Sierra Wireless AirCard 595U */ { USB_DEVICE(0x1199, 0x0021) }, /* Sierra Wireless AirCard 597E */ { USB_DEVICE(0x1199, 0x6802) }, /* Sierra Wireless MC8755 */ { USB_DEVICE(0x1199, 0x6804) }, /* Sierra Wireless MC8755 */ @@ -60,6 +61,7 @@ static struct usb_device_id id_table_3port [] = { { USB_DEVICE(0x1199, 0x0218) }, /* Sierra Wireless MC5720 */ { USB_DEVICE(0x1199, 0x0020) }, /* Sierra Wireless MC5725 */ { USB_DEVICE(0x1199, 0x0019) }, /* Sierra Wireless AirCard 595 */ + { USB_DEVICE(0x1199, 0x0120) }, /* Sierra Wireless AirCard 595U */ { USB_DEVICE(0x1199, 0x0021) }, /* Sierra Wireless AirCard 597E */ { USB_DEVICE(0x1199, 0x6802) }, /* Sierra Wireless MC8755 */ { USB_DEVICE(0x1199, 0x6804) }, /* Sierra Wireless MC8755 */ diff --git a/drivers/usb/storage/onetouch.c b/drivers/usb/storage/onetouch.c index 6d3dad3d1daeb2..d35369392feda4 100644 --- a/drivers/usb/storage/onetouch.c +++ b/drivers/usb/storage/onetouch.c @@ -84,7 +84,7 @@ resubmit: static int usb_onetouch_open(struct input_dev *dev) { - struct usb_onetouch *onetouch = dev->private; + struct usb_onetouch *onetouch = input_get_drvdata(dev); onetouch->is_open = 1; onetouch->irq->dev = onetouch->udev; @@ -98,7 +98,7 @@ static int usb_onetouch_open(struct input_dev *dev) static void usb_onetouch_close(struct input_dev *dev) { - struct usb_onetouch *onetouch = dev->private; + struct usb_onetouch *onetouch = input_get_drvdata(dev); usb_kill_urb(onetouch->irq); onetouch->is_open = 0; @@ -185,13 +185,14 @@ int onetouch_connect_input(struct us_data *ss) input_dev->name = onetouch->name; input_dev->phys = onetouch->phys; usb_to_input_id(udev, &input_dev->id); - input_dev->cdev.dev = &udev->dev; + input_dev->dev.parent = &udev->dev; set_bit(EV_KEY, input_dev->evbit); set_bit(ONETOUCH_BUTTON, input_dev->keybit); clear_bit(0, input_dev->keybit); - input_dev->private = onetouch; + input_set_drvdata(input_dev, onetouch); + input_dev->open = usb_onetouch_open; input_dev->close = usb_onetouch_close; diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 8b3145ab775752..d230ee72f9cd77 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1179,14 +1179,20 @@ UNUSUAL_DEV( 0x0a17, 0x006, 0x0000, 0xffff, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY ), -/* This is a virtual windows driver CD, which the zd1211rw driver automatically - * converts into a WLAN device. */ +/* These are virtual windows driver CDs, which the zd1211rw driver automatically + * converts into a WLAN devices. */ UNUSUAL_DEV( 0x0ace, 0x2011, 0x0101, 0x0101, "ZyXEL", "G-220F USB-WLAN Install", US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_IGNORE_DEVICE ), +UNUSUAL_DEV( 0x0ace, 0x20ff, 0x0101, 0x0101, + "SiteCom", + "WL-117 USB-WLAN Install", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_IGNORE_DEVICE ), + #ifdef CONFIG_USB_STORAGE_ISD200 UNUSUAL_DEV( 0x0bf6, 0xa001, 0x0100, 0x0110, "ATI", diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 4d7485fa553ff3..6e1f1ea21b38dd 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -704,6 +704,91 @@ config FB_CG6 This is the frame buffer device driver for the CGsix (GX, TurboGX) frame buffer. +config FB_FFB + bool "Creator/Creator3D/Elite3D support" + depends on FB_SBUS && SPARC64 + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + help + This is the frame buffer device driver for the Creator, Creator3D, + and Elite3D graphics boards. + +config FB_TCX + bool "TCX (SS4/SS5 only) support" + depends on FB_SBUS + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + help + This is the frame buffer device driver for the TCX 24/8bit frame + buffer. + +config FB_CG14 + bool "CGfourteen (SX) support" + depends on FB_SBUS + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + help + This is the frame buffer device driver for the CGfourteen frame + buffer on Desktop SPARCsystems with the SX graphics option. + +config FB_P9100 + bool "P9100 (Sparcbook 3 only) support" + depends on FB_SBUS + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + help + This is the frame buffer device driver for the P9100 card + supported on Sparcbook 3 machines. + +config FB_LEO + bool "Leo (ZX) support" + depends on FB_SBUS + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + help + This is the frame buffer device driver for the SBUS-based Sun ZX + (leo) frame buffer cards. + +config FB_IGA + bool "IGA 168x display support" + depends on FB && SPARC32 + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + help + This is the framebuffer device for the INTERGRAPHICS 1680 and + successor frame buffer cards. + +config FB_XVR500 + bool "Sun XVR-500 3DLABS Wildcat support" + depends on FB && PCI && SPARC64 + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + help + This is the framebuffer device for the Sun XVR-500 and similar + graphics cards based upon the 3DLABS Wildcat chipset. The driver + only works on sparc64 systems where the system firwmare has + mostly initialized the card already. It is treated as a + completely dumb framebuffer device. + +config FB_XVR2500 + bool "Sun XVR-2500 3DLABS Wildcat support" + depends on FB && PCI && SPARC64 + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + help + This is the framebuffer device for the Sun XVR-2500 and similar + graphics cards based upon the 3DLABS Wildcat chipset. The driver + only works on sparc64 systems where the system firwmare has + mostly initialized the card already. It is treated as a + completely dumb framebuffer device. + config FB_PVR2 tristate "NEC PowerVR 2 display support" depends on FB && SH_DREAMCAST @@ -1195,7 +1280,7 @@ config FB_ATY config FB_ATY_CT bool "Mach64 CT/VT/GT/LT (incl. 3D RAGE) support" depends on PCI && FB_ATY - default y if SPARC64 && FB_PCI + default y if SPARC64 && PCI help Say Y here to support use of ATI's 64-bit Rage boards (or other boards based on the Mach64 CT, VT, GT, and LT chipsets) as a @@ -1484,95 +1569,6 @@ config FB_AU1200 source "drivers/video/geode/Kconfig" -config FB_FFB - bool "Creator/Creator3D/Elite3D support" - depends on FB_SBUS && SPARC64 - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT - help - This is the frame buffer device driver for the Creator, Creator3D, - and Elite3D graphics boards. - -config FB_TCX - bool "TCX (SS4/SS5 only) support" - depends on FB_SBUS - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT - help - This is the frame buffer device driver for the TCX 24/8bit frame - buffer. - -config FB_CG14 - bool "CGfourteen (SX) support" - depends on FB_SBUS - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT - help - This is the frame buffer device driver for the CGfourteen frame - buffer on Desktop SPARCsystems with the SX graphics option. - -config FB_P9100 - bool "P9100 (Sparcbook 3 only) support" - depends on FB_SBUS - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT - help - This is the frame buffer device driver for the P9100 card - supported on Sparcbook 3 machines. - -config FB_LEO - bool "Leo (ZX) support" - depends on FB_SBUS - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT - help - This is the frame buffer device driver for the SBUS-based Sun ZX - (leo) frame buffer cards. - -config FB_XVR500 - bool "Sun XVR-500 3DLABS Wildcat support" - depends on (FB = y) && PCI && SPARC64 - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT - help - This is the framebuffer device for the Sun XVR-500 and similar - graphics cards based upon the 3DLABS Wildcat chipset. The driver - only works on sparc64 systems where the system firwmare has - mostly initialized the card already. It is treated as a - completely dumb framebuffer device. - -config FB_XVR2500 - bool "Sun XVR-2500 3DLABS Wildcat support" - depends on (FB = y) && PCI && SPARC64 - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT - help - This is the framebuffer device for the Sun XVR-2500 and similar - graphics cards based upon the 3DLABS Wildcat chipset. The driver - only works on sparc64 systems where the system firwmare has - mostly initialized the card already. It is treated as a - completely dumb framebuffer device. - -config FB_PCI - bool "PCI framebuffers" - depends on (FB = y) && PCI && SPARC - -config FB_IGA - bool "IGA 168x display support" - depends on SPARC32 && FB_PCI - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT - help - This is the framebuffer device for the INTERGRAPHICS 1680 and - successor frame buffer cards. - config FB_HIT tristate "HD64461 Frame Buffer support" depends on FB && HD64461 @@ -1796,9 +1792,10 @@ config FB_IBM_GXT4500 config FB_PS3 bool "PS3 GPU framebuffer driver" depends on (FB = y) && PS3_PS3AV - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT + select FB_SYS_FILLRECT + select FB_SYS_COPYAREA + select FB_SYS_IMAGEBLIT + select FB_SYS_FOPS ---help--- Include support for the virtual frame buffer in the PS3 platform. diff --git a/drivers/video/console/vgacon.c b/drivers/video/console/vgacon.c index 2460b82a1d9323..f46fe95f69fbf1 100644 --- a/drivers/video/console/vgacon.c +++ b/drivers/video/console/vgacon.c @@ -368,9 +368,14 @@ static const char *vgacon_startup(void) #endif } + /* SCREEN_INFO initialized? */ + if ((ORIG_VIDEO_MODE == 0) && + (ORIG_VIDEO_LINES == 0) && + (ORIG_VIDEO_COLS == 0)) + goto no_vga; + /* VGA16 modes are not handled by VGACON */ - if ((ORIG_VIDEO_MODE == 0x00) || /* SCREEN_INFO not initialized */ - (ORIG_VIDEO_MODE == 0x0D) || /* 320x200/4 */ + if ((ORIG_VIDEO_MODE == 0x0D) || /* 320x200/4 */ (ORIG_VIDEO_MODE == 0x0E) || /* 640x200/4 */ (ORIG_VIDEO_MODE == 0x10) || /* 640x350/4 */ (ORIG_VIDEO_MODE == 0x12) || /* 640x480/4 */ diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c index 267c1ff9ebd9b8..a1258989859767 100644 --- a/drivers/video/imxfb.c +++ b/drivers/video/imxfb.c @@ -394,26 +394,18 @@ static void imxfb_setup_gpio(struct imxfb_info *fbi) /* initialize GPIOs */ imx_gpio_mode(PD6_PF_LSCLK); - imx_gpio_mode(PD10_PF_SPL_SPR); imx_gpio_mode(PD11_PF_CONTRAST); imx_gpio_mode(PD14_PF_FLM_VSYNC); imx_gpio_mode(PD13_PF_LP_HSYNC); - imx_gpio_mode(PD7_PF_REV); - imx_gpio_mode(PD8_PF_CLS); - -#ifndef CONFIG_MACH_PIMX1 - /* on PiMX1 used as buffers enable signal - */ - imx_gpio_mode(PD9_PF_PS); -#endif - -#ifndef CONFIG_MACH_MX1FS2 - /* on mx1fs2 this pin is used to (de)activate the display, so we need - * it as a normal gpio - */ imx_gpio_mode(PD12_PF_ACD_OE); -#endif + /* These are only needed for Sharp HR TFT displays */ + if (fbi->pcr & PCR_SHARP) { + imx_gpio_mode(PD7_PF_REV); + imx_gpio_mode(PD8_PF_CLS); + imx_gpio_mode(PD9_PF_PS); + imx_gpio_mode(PD10_PF_SPL_SPR); + } } #ifdef CONFIG_PM @@ -476,7 +468,6 @@ static int __init imxfb_init_fbinfo(struct device *dev) info->fbops = &imxfb_ops; info->flags = FBINFO_FLAG_DEFAULT; - info->pseudo_palette = (fbi + 1); fbi->rgb[RGB_16] = &def_rgb_16; fbi->rgb[RGB_8] = &def_rgb_8; @@ -499,6 +490,7 @@ static int __init imxfb_init_fbinfo(struct device *dev) info->var.sync = inf->sync; info->var.grayscale = inf->cmap_greyscale; fbi->cmap_inverse = inf->cmap_inverse; + fbi->cmap_static = inf->cmap_static; fbi->pcr = inf->pcr; fbi->lscr1 = inf->lscr1; fbi->dmacr = inf->dmacr; diff --git a/drivers/video/pm2fb.c b/drivers/video/pm2fb.c index ab5e66890e4e7f..0a04483aa3e027 100644 --- a/drivers/video/pm2fb.c +++ b/drivers/video/pm2fb.c @@ -183,15 +183,17 @@ static inline void pm2_RDAC_WR(struct pm2fb_par* p, s32 idx, u32 v) index = PM2VR_RD_INDEXED_DATA; break; } - mb(); + wmb(); pm2_WR(p, index, v); + wmb(); } static inline void pm2v_RDAC_WR(struct pm2fb_par* p, s32 idx, u32 v) { pm2_WR(p, PM2VR_RD_INDEX_LOW, idx & 0xff); - mb(); + wmb(); pm2_WR(p, PM2VR_RD_INDEXED_DATA, v); + wmb(); } #ifdef CONFIG_FB_PM2_FIFO_DISCONNECT @@ -466,11 +468,9 @@ static void set_memclock(struct pm2fb_par* par, u32 clk) WAIT_FIFO(par, 8); pm2_WR(par, PM2VR_RD_INDEX_HIGH, PM2VI_RD_MCLK_CONTROL >> 8); pm2v_RDAC_WR(par, PM2VI_RD_MCLK_CONTROL, 0); - wmb(); pm2v_RDAC_WR(par, PM2VI_RD_MCLK_PRESCALE, m); pm2v_RDAC_WR(par, PM2VI_RD_MCLK_FEEDBACK, n); pm2v_RDAC_WR(par, PM2VI_RD_MCLK_POSTSCALE, p); - wmb(); pm2v_RDAC_WR(par, PM2VI_RD_MCLK_CONTROL, 1); rmb(); for (i = 256; @@ -483,12 +483,9 @@ static void set_memclock(struct pm2fb_par* par, u32 clk) pm2_mnp(clk, &m, &n, &p); WAIT_FIFO(par, 10); pm2_RDAC_WR(par, PM2I_RD_MEMORY_CLOCK_3, 6); - wmb(); pm2_RDAC_WR(par, PM2I_RD_MEMORY_CLOCK_1, m); pm2_RDAC_WR(par, PM2I_RD_MEMORY_CLOCK_2, n); - wmb(); pm2_RDAC_WR(par, PM2I_RD_MEMORY_CLOCK_3, 8|p); - wmb(); pm2_RDAC_RD(par, PM2I_RD_MEMORY_CLOCK_STATUS); rmb(); for (i = 256; @@ -509,12 +506,9 @@ static void set_pixclock(struct pm2fb_par* par, u32 clk) pm2_mnp(clk, &m, &n, &p); WAIT_FIFO(par, 8); pm2_RDAC_WR(par, PM2I_RD_PIXEL_CLOCK_A3, 0); - wmb(); pm2_RDAC_WR(par, PM2I_RD_PIXEL_CLOCK_A1, m); pm2_RDAC_WR(par, PM2I_RD_PIXEL_CLOCK_A2, n); - wmb(); pm2_RDAC_WR(par, PM2I_RD_PIXEL_CLOCK_A3, 8|p); - wmb(); pm2_RDAC_RD(par, PM2I_RD_PIXEL_CLOCK_STATUS); rmb(); for (i = 256; @@ -1066,10 +1060,9 @@ static void pm2fb_block_op(struct fb_info* info, int copy, if (!w || !h) return; - WAIT_FIFO(par, 6); + WAIT_FIFO(par, 5); pm2_WR(par, PM2R_CONFIG, PM2F_CONFIG_FB_WRITE_ENABLE | PM2F_CONFIG_FB_READ_SOURCE_ENABLE); - pm2_WR(par, PM2R_FB_PIXEL_OFFSET, 0); if (copy) pm2_WR(par, PM2R_FB_SOURCE_DELTA, ((ysrc-y) & 0xfff) << 16 | ((xsrc-x) & 0xfff)); diff --git a/drivers/video/pm3fb.c b/drivers/video/pm3fb.c index c77a1a1fd46bcf..616a0c08e30c2f 100644 --- a/drivers/video/pm3fb.c +++ b/drivers/video/pm3fb.c @@ -52,11 +52,6 @@ static char *mode_option __devinitdata; /* - * If your driver supports multiple boards, you should make the - * below data types arrays, or allocate them dynamically (using kmalloc()). - */ - -/* * This structure defines the hardware state of the graphics card. Normally * you place this in a header file in linux/include/video. This file usually * also includes register information. That allows other driver subsystems @@ -67,7 +62,7 @@ struct pm3_par { unsigned char __iomem *v_regs;/* virtual address of p_regs */ u32 video; /* video flags before blanking */ u32 base; /* screen base (xoffset+yoffset) in 128 bits unit */ - u32 palette[16]; + u32 palette[16]; }; /* @@ -104,36 +99,28 @@ static inline void PM3_WAIT(struct pm3_par *par, u32 n) while (PM3_READ_REG(par, PM3InFIFOSpace) < n); } -static inline void PM3_SLOW_WRITE_REG(struct pm3_par *par, s32 off, u32 v) -{ - if (par->v_regs) { - mb(); - PM3_WAIT(par, 1); - wmb(); - PM3_WRITE_REG(par, off, v); - } -} - -static inline void PM3_SET_INDEX(struct pm3_par *par, unsigned index) -{ - PM3_SLOW_WRITE_REG(par, PM3RD_IndexHigh, (index >> 8) & 0xff); - PM3_SLOW_WRITE_REG(par, PM3RD_IndexLow, index & 0xff); -} - static inline void PM3_WRITE_DAC_REG(struct pm3_par *par, unsigned r, u8 v) { - PM3_SET_INDEX(par, r); + PM3_WAIT(par, 3); + PM3_WRITE_REG(par, PM3RD_IndexHigh, (r >> 8) & 0xff); + PM3_WRITE_REG(par, PM3RD_IndexLow, r & 0xff); wmb(); PM3_WRITE_REG(par, PM3RD_IndexedData, v); + wmb(); } static inline void pm3fb_set_color(struct pm3_par *par, unsigned char regno, unsigned char r, unsigned char g, unsigned char b) { - PM3_SLOW_WRITE_REG(par, PM3RD_PaletteWriteAddress, regno); - PM3_SLOW_WRITE_REG(par, PM3RD_PaletteData, r); - PM3_SLOW_WRITE_REG(par, PM3RD_PaletteData, g); - PM3_SLOW_WRITE_REG(par, PM3RD_PaletteData, b); + PM3_WAIT(par, 4); + PM3_WRITE_REG(par, PM3RD_PaletteWriteAddress, regno); + wmb(); + PM3_WRITE_REG(par, PM3RD_PaletteData, r); + wmb(); + PM3_WRITE_REG(par, PM3RD_PaletteData, g); + wmb(); + PM3_WRITE_REG(par, PM3RD_PaletteData, b); + wmb(); } static void pm3fb_clear_colormap(struct pm3_par *par, @@ -141,7 +128,7 @@ static void pm3fb_clear_colormap(struct pm3_par *par, { int i; - for (i = 0; i < 256 ; i++) /* fill color map with white */ + for (i = 0; i < 256 ; i++) pm3fb_set_color(par, i, r, g, b); } @@ -175,19 +162,26 @@ static void pm3fb_calculate_clock(unsigned long reqclock, } } -static inline int pm3fb_shift_bpp(unsigned long depth, int v) +static inline int pm3fb_depth(const struct fb_var_screeninfo *var) { - switch (depth) { + if ( var->bits_per_pixel == 16 ) + return var->red.length + var->green.length + + var->blue.length; + + return var->bits_per_pixel; +} + +static inline int pm3fb_shift_bpp(unsigned bpp, int v) +{ + switch (bpp) { case 8: return (v >> 4); - case 12: - case 15: case 16: return (v >> 3); case 32: return (v >> 2); } - DPRINTK("Unsupported depth %ld\n", depth); + DPRINTK("Unsupported depth %u\n", bpp); return 0; } @@ -206,56 +200,50 @@ static void pm3fb_write_mode(struct fb_info *info) const u32 vbend = vsend + info->var.upper_margin; const u32 vtotal = info->var.yres + vbend; const u32 width = (info->var.xres_virtual + 7) & ~7; - - PM3_SLOW_WRITE_REG(par, PM3MemBypassWriteMask, 0xffffffff); - PM3_SLOW_WRITE_REG(par, PM3Aperture0, 0x00000000); - PM3_SLOW_WRITE_REG(par, PM3Aperture1, 0x00000000); - PM3_SLOW_WRITE_REG(par, PM3FIFODis, 0x00000007); - - PM3_SLOW_WRITE_REG(par, PM3HTotal, - pm3fb_shift_bpp(info->var.bits_per_pixel, - htotal - 1)); - PM3_SLOW_WRITE_REG(par, PM3HsEnd, - pm3fb_shift_bpp(info->var.bits_per_pixel, - hsend)); - PM3_SLOW_WRITE_REG(par, PM3HsStart, - pm3fb_shift_bpp(info->var.bits_per_pixel, - hsstart)); - PM3_SLOW_WRITE_REG(par, PM3HbEnd, - pm3fb_shift_bpp(info->var.bits_per_pixel, - hbend)); - PM3_SLOW_WRITE_REG(par, PM3HgEnd, - pm3fb_shift_bpp(info->var.bits_per_pixel, - hbend)); - PM3_SLOW_WRITE_REG(par, PM3ScreenStride, - pm3fb_shift_bpp(info->var.bits_per_pixel, - width)); - PM3_SLOW_WRITE_REG(par, PM3VTotal, vtotal - 1); - PM3_SLOW_WRITE_REG(par, PM3VsEnd, vsend - 1); - PM3_SLOW_WRITE_REG(par, PM3VsStart, vsstart - 1); - PM3_SLOW_WRITE_REG(par, PM3VbEnd, vbend); - - switch (info->var.bits_per_pixel) { + const unsigned bpp = info->var.bits_per_pixel; + + PM3_WAIT(par, 20); + PM3_WRITE_REG(par, PM3MemBypassWriteMask, 0xffffffff); + PM3_WRITE_REG(par, PM3Aperture0, 0x00000000); + PM3_WRITE_REG(par, PM3Aperture1, 0x00000000); + PM3_WRITE_REG(par, PM3FIFODis, 0x00000007); + + PM3_WRITE_REG(par, PM3HTotal, + pm3fb_shift_bpp(bpp, htotal - 1)); + PM3_WRITE_REG(par, PM3HsEnd, + pm3fb_shift_bpp(bpp, hsend)); + PM3_WRITE_REG(par, PM3HsStart, + pm3fb_shift_bpp(bpp, hsstart)); + PM3_WRITE_REG(par, PM3HbEnd, + pm3fb_shift_bpp(bpp, hbend)); + PM3_WRITE_REG(par, PM3HgEnd, + pm3fb_shift_bpp(bpp, hbend)); + PM3_WRITE_REG(par, PM3ScreenStride, + pm3fb_shift_bpp(bpp, width)); + PM3_WRITE_REG(par, PM3VTotal, vtotal - 1); + PM3_WRITE_REG(par, PM3VsEnd, vsend - 1); + PM3_WRITE_REG(par, PM3VsStart, vsstart - 1); + PM3_WRITE_REG(par, PM3VbEnd, vbend); + + switch (bpp) { case 8: - PM3_SLOW_WRITE_REG(par, PM3ByAperture1Mode, + PM3_WRITE_REG(par, PM3ByAperture1Mode, PM3ByApertureMode_PIXELSIZE_8BIT); - PM3_SLOW_WRITE_REG(par, PM3ByAperture2Mode, + PM3_WRITE_REG(par, PM3ByAperture2Mode, PM3ByApertureMode_PIXELSIZE_8BIT); break; - case 12: - case 15: case 16: #ifndef __BIG_ENDIAN - PM3_SLOW_WRITE_REG(par, PM3ByAperture1Mode, + PM3_WRITE_REG(par, PM3ByAperture1Mode, PM3ByApertureMode_PIXELSIZE_16BIT); - PM3_SLOW_WRITE_REG(par, PM3ByAperture2Mode, + PM3_WRITE_REG(par, PM3ByAperture2Mode, PM3ByApertureMode_PIXELSIZE_16BIT); #else - PM3_SLOW_WRITE_REG(par, PM3ByAperture1Mode, + PM3_WRITE_REG(par, PM3ByAperture1Mode, PM3ByApertureMode_PIXELSIZE_16BIT | PM3ByApertureMode_BYTESWAP_BADC); - PM3_SLOW_WRITE_REG(par, PM3ByAperture2Mode, + PM3_WRITE_REG(par, PM3ByAperture2Mode, PM3ByApertureMode_PIXELSIZE_16BIT | PM3ByApertureMode_BYTESWAP_BADC); #endif /* ! __BIG_ENDIAN */ @@ -263,23 +251,22 @@ static void pm3fb_write_mode(struct fb_info *info) case 32: #ifndef __BIG_ENDIAN - PM3_SLOW_WRITE_REG(par, PM3ByAperture1Mode, + PM3_WRITE_REG(par, PM3ByAperture1Mode, PM3ByApertureMode_PIXELSIZE_32BIT); - PM3_SLOW_WRITE_REG(par, PM3ByAperture2Mode, + PM3_WRITE_REG(par, PM3ByAperture2Mode, PM3ByApertureMode_PIXELSIZE_32BIT); #else - PM3_SLOW_WRITE_REG(par, PM3ByAperture1Mode, + PM3_WRITE_REG(par, PM3ByAperture1Mode, PM3ByApertureMode_PIXELSIZE_32BIT | PM3ByApertureMode_BYTESWAP_DCBA); - PM3_SLOW_WRITE_REG(par, PM3ByAperture2Mode, + PM3_WRITE_REG(par, PM3ByAperture2Mode, PM3ByApertureMode_PIXELSIZE_32BIT | PM3ByApertureMode_BYTESWAP_DCBA); #endif /* ! __BIG_ENDIAN */ break; default: - DPRINTK("Unsupported depth %d\n", - info->var.bits_per_pixel); + DPRINTK("Unsupported depth %d\n", bpp); break; } @@ -296,14 +283,15 @@ static void pm3fb_write_mode(struct fb_info *info) PM3VideoControl_VSYNC_MASK); video |= PM3VideoControl_HSYNC_ACTIVE_HIGH | PM3VideoControl_VSYNC_ACTIVE_HIGH; - PM3_SLOW_WRITE_REG(par, PM3VideoControl, video); + PM3_WRITE_REG(par, PM3VideoControl, video); } - PM3_SLOW_WRITE_REG(par, PM3VClkCtl, + PM3_WRITE_REG(par, PM3VClkCtl, (PM3_READ_REG(par, PM3VClkCtl) & 0xFFFFFFFC)); - PM3_SLOW_WRITE_REG(par, PM3ScreenBase, par->base); - PM3_SLOW_WRITE_REG(par, PM3ChipConfig, + PM3_WRITE_REG(par, PM3ScreenBase, par->base); + PM3_WRITE_REG(par, PM3ChipConfig, (PM3_READ_REG(par, PM3ChipConfig) & 0xFFFFFFFD)); + wmb(); { unsigned char uninitialized_var(m); /* ClkPreScale */ unsigned char uninitialized_var(n); /* ClkFeedBackScale */ @@ -337,7 +325,7 @@ static void pm3fb_write_mode(struct fb_info *info) PM3_WRITE_DAC_REG(par, PM3RD_DACControl, 0x00); - switch (info->var.bits_per_pixel) { + switch (pm3fb_depth(&info->var)) { case 8: PM3_WRITE_DAC_REG(par, PM3RD_PixelSize, PM3RD_PixelSize_8_BIT_PIXELS); @@ -393,57 +381,44 @@ static void pm3fb_write_mode(struct fb_info *info) * hardware independent functions */ int pm3fb_init(void); -int pm3fb_setup(char*); static int pm3fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) { u32 lpitch; + unsigned bpp = var->red.length + var->green.length + + var->blue.length + var->transp.length; - var->transp.offset = 0; - var->transp.length = 0; - switch(var->bits_per_pixel) { - case 8: - var->red.length = var->green.length = var->blue.length = 8; - var->red.offset = var->green.offset = var->blue.offset = 0; - break; - case 12: - var->red.offset = 8; - var->red.length = 4; - var->green.offset = 4; - var->green.length = 4; - var->blue.offset = 0; - var->blue.length = 4; - var->transp.offset = 12; - var->transp.length = 4; - case 15: - var->red.offset = 10; - var->red.length = 5; - var->green.offset = 5; - var->green.length = 5; - var->blue.offset = 0; - var->blue.length = 5; - var->transp.offset = 15; - var->transp.length = 1; - break; - case 16: - var->red.offset = 11; - var->red.length = 5; - var->green.offset = 5; - var->green.length = 6; - var->blue.offset = 0; - var->blue.length = 5; - break; - case 32: - var->transp.offset = 24; - var->transp.length = 8; - var->red.offset = 16; - var->green.offset = 8; - var->blue.offset = 0; - var->red.length = var->green.length = var->blue.length = 8; - break; - default: - DPRINTK("depth not supported: %u\n", var->bits_per_pixel); - return -EINVAL; + if ( bpp != var->bits_per_pixel ) { + /* set predefined mode for bits_per_pixel settings */ + + switch(var->bits_per_pixel) { + case 8: + var->red.length = var->green.length = var->blue.length = 8; + var->red.offset = var->green.offset = var->blue.offset = 0; + var->transp.offset = 0; + var->transp.length = 0; + break; + case 16: + var->red.length = var->blue.length = 5; + var->green.length = 6; + var->transp.length = 0; + break; + case 32: + var->red.length = var->green.length = var->blue.length = 8; + var->transp.length = 8; + break; + default: + DPRINTK("depth not supported: %u\n", var->bits_per_pixel); + return -EINVAL; + } + } + /* it is assumed BGRA order */ + if (var->bits_per_pixel > 8 ) + { + var->blue.offset = 0; + var->green.offset = var->blue.length; + var->red.offset = var->green.offset + var->green.length; + var->transp.offset = var->red.offset + var->red.length; } var->height = var->width = -1; @@ -502,10 +477,9 @@ static int pm3fb_set_par(struct fb_info *info) { struct pm3_par *par = info->par; const u32 xres = (info->var.xres + 31) & ~31; - const int depth = (info->var.bits_per_pixel + 7) & ~7; + const unsigned bpp = info->var.bits_per_pixel; - par->base = pm3fb_shift_bpp(info->var.bits_per_pixel, - (info->var.yoffset * xres) + par->base = pm3fb_shift_bpp(bpp,(info->var.yoffset * xres) + info->var.xoffset); par->video = 0; @@ -530,12 +504,10 @@ static int pm3fb_set_par(struct fb_info *info) par->video |= PM3VideoControl_DISABLE; DPRINTK("PM3Video disabled\n"); } - switch (depth) { + switch (bpp) { case 8: par->video |= PM3VideoControl_PIXELSIZE_8BIT; break; - case 12: - case 15: case 16: par->video |= PM3VideoControl_PIXELSIZE_16BIT; break; @@ -548,9 +520,9 @@ static int pm3fb_set_par(struct fb_info *info) } info->fix.visual = - (depth == 8) ? FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR; + (bpp == 8) ? FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR; info->fix.line_length = ((info->var.xres_virtual + 7) & ~7) - * depth / 8; + * bpp / 8; /* pm3fb_clear_memory(info, 0);*/ pm3fb_clear_colormap(par, 0, 0, 0); @@ -580,8 +552,8 @@ static int pm3fb_setcolreg(unsigned regno, unsigned red, unsigned green, * var->{color}.length contains length of bitfield * {hardwarespecific} contains width of DAC * pseudo_palette[X] is programmed to (X << red.offset) | - * (X << green.offset) | - * (X << blue.offset) + * (X << green.offset) | + * (X << blue.offset) * RAMDAC[X] is programmed to (red, green, blue) * color depth = SUM(var->{color}.length) * @@ -621,7 +593,6 @@ static int pm3fb_setcolreg(unsigned regno, unsigned red, unsigned green, case 8: break; case 16: - case 24: case 32: ((u32*)(info->pseudo_palette))[regno] = v; break; @@ -643,7 +614,8 @@ static int pm3fb_pan_display(struct fb_var_screeninfo *var, par->base = pm3fb_shift_bpp(var->bits_per_pixel, (var->yoffset * xres) + var->xoffset); - PM3_SLOW_WRITE_REG(par, PM3ScreenBase, par->base); + PM3_WAIT(par, 1); + PM3_WRITE_REG(par, PM3ScreenBase, par->base); return 0; } @@ -665,31 +637,31 @@ static int pm3fb_blank(int blank_mode, struct fb_info *info) switch (blank_mode) { case FB_BLANK_UNBLANK: - video = video | PM3VideoControl_ENABLE; + video |= PM3VideoControl_ENABLE; break; - case FB_BLANK_NORMAL: /* FIXME */ - video = video & ~(PM3VideoControl_ENABLE); + case FB_BLANK_NORMAL: + video &= ~(PM3VideoControl_ENABLE); break; case FB_BLANK_HSYNC_SUSPEND: - video = video & ~(PM3VideoControl_HSYNC_MASK | - PM3VideoControl_BLANK_ACTIVE_LOW); + video &= ~(PM3VideoControl_HSYNC_MASK | + PM3VideoControl_BLANK_ACTIVE_LOW); break; case FB_BLANK_VSYNC_SUSPEND: - video = video & ~(PM3VideoControl_VSYNC_MASK | - PM3VideoControl_BLANK_ACTIVE_LOW); + video &= ~(PM3VideoControl_VSYNC_MASK | + PM3VideoControl_BLANK_ACTIVE_LOW); break; case FB_BLANK_POWERDOWN: - video = video & ~(PM3VideoControl_HSYNC_MASK | - PM3VideoControl_VSYNC_MASK | - PM3VideoControl_BLANK_ACTIVE_LOW); + video &= ~(PM3VideoControl_HSYNC_MASK | + PM3VideoControl_VSYNC_MASK | + PM3VideoControl_BLANK_ACTIVE_LOW); break; default: DPRINTK("Unsupported blanking %d\n", blank_mode); return 1; } - PM3_SLOW_WRITE_REG(par,PM3VideoControl, video); - + PM3_WAIT(par, 1); + PM3_WRITE_REG(par,PM3VideoControl, video); return 0; } @@ -703,9 +675,9 @@ static struct fb_ops pm3fb_ops = { .fb_set_par = pm3fb_set_par, .fb_setcolreg = pm3fb_setcolreg, .fb_pan_display = pm3fb_pan_display, - .fb_fillrect = cfb_fillrect, /* Needed !!! */ - .fb_copyarea = cfb_copyarea, /* Needed !!! */ - .fb_imageblit = cfb_imageblit, /* Needed !!! */ + .fb_fillrect = cfb_fillrect, + .fb_copyarea = cfb_copyarea, + .fb_imageblit = cfb_imageblit, .fb_blank = pm3fb_blank, }; @@ -722,7 +694,7 @@ static unsigned long pm3fb_size_memory(struct pm3_par *par) unsigned long memsize = 0, tempBypass, i, temp1, temp2; unsigned char __iomem *screen_mem; - pm3fb_fix.smem_len = 64 * 1024 * 1024; /* request full aperture size */ + pm3fb_fix.smem_len = 64 * 1024l * 1024; /* request full aperture size */ /* Linear frame buffer - request region and map it. */ if (!request_mem_region(pm3fb_fix.smem_start, pm3fb_fix.smem_len, "pm3fb smem")) { @@ -744,7 +716,8 @@ static unsigned long pm3fb_size_memory(struct pm3_par *par) DPRINTK("PM3MemBypassWriteMask was: 0x%08lx\n", tempBypass); - PM3_SLOW_WRITE_REG(par, PM3MemBypassWriteMask, 0xFFFFFFFF); + PM3_WAIT(par, 1); + PM3_WRITE_REG(par, PM3MemBypassWriteMask, 0xFFFFFFFF); /* pm3 split up memory, replicates, and do a lot of nasty stuff IMHO ;-) */ for (i = 0; i < 32; i++) { @@ -765,10 +738,9 @@ static unsigned long pm3fb_size_memory(struct pm3_par *par) if (memsize + 1 == i) { for (i = 0; i < 32; i++) { /* Clear first 32MB ; 0 is 0, no need to byteswap */ - writel(0x0000000, - (screen_mem + (i * 1048576))); - mb(); + writel(0x0000000, (screen_mem + (i * 1048576))); } + wmb(); for (i = 32; i < 64; i++) { fb_writel(i * 0x00345678, @@ -787,7 +759,8 @@ static unsigned long pm3fb_size_memory(struct pm3_par *par) } DPRINTK("Second detect pass got %ld MB\n", memsize + 1); - PM3_SLOW_WRITE_REG(par, PM3MemBypassWriteMask, tempBypass); + PM3_WAIT(par, 1); + PM3_WRITE_REG(par, PM3MemBypassWriteMask, tempBypass); iounmap(screen_mem); release_mem_region(pm3fb_fix.smem_start, pm3fb_fix.smem_len); @@ -890,7 +863,6 @@ static int __devinit pm3fb_probe(struct pci_dev *dev, goto err_exit_both; } - /* This has to been done !!! */ if (fb_alloc_cmap(&info->cmap, 256, 0) < 0) { retval = -ENOMEM; goto err_exit_both; @@ -907,7 +879,7 @@ static int __devinit pm3fb_probe(struct pci_dev *dev, } printk(KERN_INFO "fb%d: %s frame buffer device\n", info->node, info->fix.id); - pci_set_drvdata(dev, info); /* or dev_set_drvdata(device, info) */ + pci_set_drvdata(dev, info); return 0; err_exit_all: @@ -949,8 +921,7 @@ static void __devexit pm3fb_remove(struct pci_dev *dev) static struct pci_device_id pm3fb_id_table[] = { { PCI_VENDOR_ID_3DLABS, 0x0a, - PCI_ANY_ID, PCI_ANY_ID, PCI_BASE_CLASS_DISPLAY << 16, - 0xff0000, 0 }, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, { 0, } }; @@ -964,6 +935,22 @@ static struct pci_driver pm3fb_driver = { MODULE_DEVICE_TABLE(pci, pm3fb_id_table); +#ifndef MODULE + /* + * Setup + */ + +/* + * Only necessary if your driver takes special options, + * otherwise we fall back on the generic fb_setup(). + */ +static int __init pm3fb_setup(char *options) +{ + /* Parse user speficied options (`video=pm3fb:') */ + return 0; +} +#endif /* MODULE */ + int __init pm3fb_init(void) { /* @@ -985,22 +972,6 @@ static void __exit pm3fb_exit(void) pci_unregister_driver(&pm3fb_driver); } -#ifndef MODULE - /* - * Setup - */ - -/* - * Only necessary if your driver takes special options, - * otherwise we fall back on the generic fb_setup(). - */ -int __init pm3fb_setup(char *options) -{ - /* Parse user speficied options (`video=pm3fb:') */ - return 0; -} -#endif /* MODULE */ - module_init(pm3fb_init); module_exit(pm3fb_exit); diff --git a/drivers/video/ps3fb.c b/drivers/video/ps3fb.c index 9756a728b74f3e..9cf92ba5d6e309 100644 --- a/drivers/video/ps3fb.c +++ b/drivers/video/ps3fb.c @@ -951,12 +951,14 @@ static int ps3fb_xdr_settings(u64 xdr_lpar) static struct fb_ops ps3fb_ops = { .fb_open = ps3fb_open, .fb_release = ps3fb_release, + .fb_read = fb_sys_read, + .fb_write = fb_sys_write, .fb_check_var = ps3fb_check_var, .fb_set_par = ps3fb_set_par, .fb_setcolreg = ps3fb_setcolreg, - .fb_fillrect = cfb_fillrect, - .fb_copyarea = cfb_copyarea, - .fb_imageblit = cfb_imageblit, + .fb_fillrect = sys_fillrect, + .fb_copyarea = sys_copyarea, + .fb_imageblit = sys_imageblit, .fb_mmap = ps3fb_mmap, .fb_blank = ps3fb_blank, .fb_ioctl = ps3fb_ioctl, diff --git a/drivers/video/w100fb.c b/drivers/video/w100fb.c index 5fc86ea20692ff..003c49a490eb90 100644 --- a/drivers/video/w100fb.c +++ b/drivers/video/w100fb.c @@ -660,7 +660,7 @@ int __init w100fb_probe(struct platform_device *pdev) err = -ENODEV; goto out; } - printk(" at 0x%08lx.\n", mem->start+W100_CFG_BASE); + printk(" at 0x%08lx.\n", (unsigned long) mem->start+W100_CFG_BASE); /* Remap the framebuffer */ remapped_fbuf = ioremap_nocache(mem->start+MEM_WINDOW_BASE, MEM_WINDOW_SIZE); @@ -753,10 +753,14 @@ int __init w100fb_probe(struct platform_device *pdev) goto out; } - device_create_file(&pdev->dev, &dev_attr_fastpllclk); - device_create_file(&pdev->dev, &dev_attr_reg_read); - device_create_file(&pdev->dev, &dev_attr_reg_write); - device_create_file(&pdev->dev, &dev_attr_flip); + err = device_create_file(&pdev->dev, &dev_attr_fastpllclk); + err |= device_create_file(&pdev->dev, &dev_attr_reg_read); + err |= device_create_file(&pdev->dev, &dev_attr_reg_write); + err |= device_create_file(&pdev->dev, &dev_attr_flip); + + if (err != 0) + printk(KERN_WARNING "fb%d: failed to register attributes (%d)\n", + info->node, err); printk(KERN_INFO "fb%d: %s frame buffer device\n", info->node, info->fix.id); return 0; diff --git a/fs/9p/vfs_addr.c b/fs/9p/vfs_addr.c index 3128aa948a4ea5..9ac4ffe9ac7d65 100644 --- a/fs/9p/vfs_addr.c +++ b/fs/9p/vfs_addr.c @@ -32,6 +32,7 @@ #include <linux/inet.h> #include <linux/pagemap.h> #include <linux/idr.h> +#include <linux/sched.h> #include "debug.h" #include "v9fs.h" diff --git a/fs/9p/vfs_dentry.c b/fs/9p/vfs_dentry.c index 775e26e82cbcb5..d93960429c09e0 100644 --- a/fs/9p/vfs_dentry.c +++ b/fs/9p/vfs_dentry.c @@ -33,6 +33,7 @@ #include <linux/inet.h> #include <linux/namei.h> #include <linux/idr.h> +#include <linux/sched.h> #include "debug.h" #include "v9fs.h" diff --git a/fs/9p/vfs_inode.c b/fs/9p/vfs_inode.c index 7624821729a0b1..c76cd8fa3f6cf2 100644 --- a/fs/9p/vfs_inode.c +++ b/fs/9p/vfs_inode.c @@ -33,6 +33,7 @@ #include <linux/inet.h> #include <linux/namei.h> #include <linux/idr.h> +#include <linux/sched.h> #include "debug.h" #include "v9fs.h" diff --git a/fs/9p/vfs_super.c b/fs/9p/vfs_super.c index 8eb9263a67b9c5..7bdf8b32684190 100644 --- a/fs/9p/vfs_super.c +++ b/fs/9p/vfs_super.c @@ -36,6 +36,7 @@ #include <linux/seq_file.h> #include <linux/mount.h> #include <linux/idr.h> +#include <linux/sched.h> #include "debug.h" #include "v9fs.h" diff --git a/fs/Kconfig.binfmt b/fs/Kconfig.binfmt index 74c64409ddbc57..d4fc6095466daa 100644 --- a/fs/Kconfig.binfmt +++ b/fs/Kconfig.binfmt @@ -38,7 +38,7 @@ config BINFMT_ELF_FDPIC config BINFMT_FLAT tristate "Kernel support for flat binaries" - depends on !MMU || SUPERH + depends on !MMU help Support uClinux FLAT format binaries. diff --git a/fs/adfs/super.c b/fs/adfs/super.c index 30c296508497d0..de2ed5ca335192 100644 --- a/fs/adfs/super.c +++ b/fs/adfs/super.c @@ -232,8 +232,7 @@ static void init_once(void * foo, struct kmem_cache * cachep, unsigned long flag { struct adfs_inode_info *ei = (struct adfs_inode_info *) foo; - if (flags & SLAB_CTOR_CONSTRUCTOR) - inode_init_once(&ei->vfs_inode); + inode_init_once(&ei->vfs_inode); } static int init_inodecache(void) diff --git a/fs/affs/inode.c b/fs/affs/inode.c index c5b9d73c084a82..4609a6c13fe917 100644 --- a/fs/affs/inode.c +++ b/fs/affs/inode.c @@ -9,7 +9,7 @@ * * (C) 1991 Linus Torvalds - minix filesystem */ - +#include <linux/sched.h> #include "affs.h" extern const struct inode_operations affs_symlink_inode_operations; diff --git a/fs/affs/super.c b/fs/affs/super.c index beff7d21e6e2f7..6d0ebc3215301b 100644 --- a/fs/affs/super.c +++ b/fs/affs/super.c @@ -15,6 +15,7 @@ #include <linux/statfs.h> #include <linux/parser.h> #include <linux/magic.h> +#include <linux/sched.h> #include "affs.h" extern struct timezone sys_tz; @@ -87,11 +88,9 @@ static void init_once(void * foo, struct kmem_cache * cachep, unsigned long flag { struct affs_inode_info *ei = (struct affs_inode_info *) foo; - if (flags & SLAB_CTOR_CONSTRUCTOR) { - init_MUTEX(&ei->i_link_lock); - init_MUTEX(&ei->i_ext_lock); - inode_init_once(&ei->vfs_inode); - } + init_MUTEX(&ei->i_link_lock); + init_MUTEX(&ei->i_ext_lock); + inode_init_once(&ei->vfs_inode); } static int init_inodecache(void) diff --git a/fs/afs/callback.c b/fs/afs/callback.c index f64e40fefc0284..bacf518c6fa80d 100644 --- a/fs/afs/callback.c +++ b/fs/afs/callback.c @@ -17,6 +17,7 @@ #include <linux/module.h> #include <linux/init.h> #include <linux/circ_buf.h> +#include <linux/sched.h> #include "internal.h" unsigned afs_vnode_update_timeout = 10; diff --git a/fs/afs/cell.c b/fs/afs/cell.c index 9b1311a1df51d3..175a567db78ce6 100644 --- a/fs/afs/cell.c +++ b/fs/afs/cell.c @@ -13,6 +13,7 @@ #include <linux/slab.h> #include <linux/key.h> #include <linux/ctype.h> +#include <linux/sched.h> #include <keys/rxrpc-type.h> #include "internal.h" diff --git a/fs/afs/dir.c b/fs/afs/dir.c index 719af4fb15dc5d..546c59522eb16e 100644 --- a/fs/afs/dir.c +++ b/fs/afs/dir.c @@ -16,6 +16,7 @@ #include <linux/fs.h> #include <linux/pagemap.h> #include <linux/ctype.h> +#include <linux/sched.h> #include "internal.h" static struct dentry *afs_lookup(struct inode *dir, struct dentry *dentry, diff --git a/fs/afs/inode.c b/fs/afs/inode.c index 47f5fed7195dbb..d196840127c6bd 100644 --- a/fs/afs/inode.c +++ b/fs/afs/inode.c @@ -19,6 +19,7 @@ #include <linux/slab.h> #include <linux/fs.h> #include <linux/pagemap.h> +#include <linux/sched.h> #include "internal.h" struct afs_iget_data { diff --git a/fs/afs/internal.h b/fs/afs/internal.h index 4953ba5a6f4452..2dac3ad2c44b6c 100644 --- a/fs/afs/internal.h +++ b/fs/afs/internal.h @@ -16,6 +16,7 @@ #include <linux/skbuff.h> #include <linux/rxrpc.h> #include <linux/key.h> +#include <linux/workqueue.h> #include "afs.h" #include "afs_vl.h" diff --git a/fs/afs/main.c b/fs/afs/main.c index f1f71ff7d5c673..cd21195bbb24bd 100644 --- a/fs/afs/main.c +++ b/fs/afs/main.c @@ -13,6 +13,7 @@ #include <linux/moduleparam.h> #include <linux/init.h> #include <linux/completion.h> +#include <linux/sched.h> #include "internal.h" MODULE_DESCRIPTION("AFS Client File System"); diff --git a/fs/afs/proc.c b/fs/afs/proc.c index d5601f617cdbff..13df512aea9edf 100644 --- a/fs/afs/proc.c +++ b/fs/afs/proc.c @@ -13,6 +13,7 @@ #include <linux/module.h> #include <linux/proc_fs.h> #include <linux/seq_file.h> +#include <linux/sched.h> #include <asm/uaccess.h> #include "internal.h" diff --git a/fs/afs/security.c b/fs/afs/security.c index e0ea88b63ebf42..566fe712c68297 100644 --- a/fs/afs/security.c +++ b/fs/afs/security.c @@ -13,6 +13,7 @@ #include <linux/slab.h> #include <linux/fs.h> #include <linux/ctype.h> +#include <linux/sched.h> #include <keys/rxrpc-type.h> #include "internal.h" diff --git a/fs/afs/super.c b/fs/afs/super.c index 579af632c8e8e8..2e8496ba120538 100644 --- a/fs/afs/super.c +++ b/fs/afs/super.c @@ -22,6 +22,7 @@ #include <linux/pagemap.h> #include <linux/parser.h> #include <linux/statfs.h> +#include <linux/sched.h> #include "internal.h" #define AFS_FS_MAGIC 0x6B414653 /* 'kAFS' */ @@ -47,7 +48,6 @@ struct file_system_type afs_fs_type = { static const struct super_operations afs_super_ops = { .statfs = afs_statfs, .alloc_inode = afs_alloc_inode, - .drop_inode = generic_delete_inode, .write_inode = afs_write_inode, .destroy_inode = afs_destroy_inode, .clear_inode = afs_clear_inode, @@ -452,17 +452,15 @@ static void afs_i_init_once(void *_vnode, struct kmem_cache *cachep, { struct afs_vnode *vnode = _vnode; - if (flags & SLAB_CTOR_CONSTRUCTOR) { - memset(vnode, 0, sizeof(*vnode)); - inode_init_once(&vnode->vfs_inode); - init_waitqueue_head(&vnode->update_waitq); - mutex_init(&vnode->permits_lock); - mutex_init(&vnode->validate_lock); - spin_lock_init(&vnode->writeback_lock); - spin_lock_init(&vnode->lock); - INIT_LIST_HEAD(&vnode->writebacks); - INIT_WORK(&vnode->cb_broken_work, afs_broken_callback_work); - } + memset(vnode, 0, sizeof(*vnode)); + inode_init_once(&vnode->vfs_inode); + init_waitqueue_head(&vnode->update_waitq); + mutex_init(&vnode->permits_lock); + mutex_init(&vnode->validate_lock); + spin_lock_init(&vnode->writeback_lock); + spin_lock_init(&vnode->lock); + INIT_LIST_HEAD(&vnode->writebacks); + INIT_WORK(&vnode->cb_broken_work, afs_broken_callback_work); } /* diff --git a/fs/afs/vlocation.c b/fs/afs/vlocation.c index 3370cdb72566ca..09e3ad0fc7cc21 100644 --- a/fs/afs/vlocation.c +++ b/fs/afs/vlocation.c @@ -12,6 +12,7 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/init.h> +#include <linux/sched.h> #include "internal.h" unsigned afs_vlocation_timeout = 10; /* volume location timeout in seconds */ diff --git a/fs/afs/vnode.c b/fs/afs/vnode.c index c36c98ce2c3ce7..232c55dc245df2 100644 --- a/fs/afs/vnode.c +++ b/fs/afs/vnode.c @@ -14,6 +14,7 @@ #include <linux/init.h> #include <linux/slab.h> #include <linux/fs.h> +#include <linux/sched.h> #include "internal.h" #if 0 diff --git a/fs/afs/volume.c b/fs/afs/volume.c index dd160cada45dc7..8bab0e3437f938 100644 --- a/fs/afs/volume.c +++ b/fs/afs/volume.c @@ -15,6 +15,7 @@ #include <linux/slab.h> #include <linux/fs.h> #include <linux/pagemap.h> +#include <linux/sched.h> #include "internal.h" static const char *afs_voltypes[] = { "R/W", "R/O", "BAK" }; diff --git a/fs/afs/write.c b/fs/afs/write.c index 28f37516c12600..a03b92a0fe1db9 100644 --- a/fs/afs/write.c +++ b/fs/afs/write.c @@ -206,7 +206,6 @@ int afs_prepare_write(struct file *file, struct page *page, _leave(" = %d [prep]", ret); return ret; } - SetPageUptodate(page); } try_again: @@ -311,8 +310,8 @@ int afs_commit_write(struct file *file, struct page *page, spin_unlock(&vnode->writeback_lock); } + SetPageUptodate(page); set_page_dirty(page); - if (PageDirty(page)) _debug("dirtied"); diff --git a/fs/befs/linuxvfs.c b/fs/befs/linuxvfs.c index fe96108a788d6d..a5c5171c282899 100644 --- a/fs/befs/linuxvfs.c +++ b/fs/befs/linuxvfs.c @@ -292,10 +292,8 @@ befs_destroy_inode(struct inode *inode) static void init_once(void * foo, struct kmem_cache * cachep, unsigned long flags) { struct befs_inode_info *bi = (struct befs_inode_info *) foo; - - if (flags & SLAB_CTOR_CONSTRUCTOR) { - inode_init_once(&bi->vfs_inode); - } + + inode_init_once(&bi->vfs_inode); } static void diff --git a/fs/bfs/inode.c b/fs/bfs/inode.c index edc08d89aabc5a..58c7bd9f530153 100644 --- a/fs/bfs/inode.c +++ b/fs/bfs/inode.c @@ -248,8 +248,7 @@ static void init_once(void * foo, struct kmem_cache * cachep, unsigned long flag { struct bfs_inode_info *bi = foo; - if (flags & SLAB_CTOR_CONSTRUCTOR) - inode_init_once(&bi->vfs_inode); + inode_init_once(&bi->vfs_inode); } static int init_inodecache(void) diff --git a/fs/binfmt_misc.c b/fs/binfmt_misc.c index 72d0b412c37664..330fd3fe854657 100644 --- a/fs/binfmt_misc.c +++ b/fs/binfmt_misc.c @@ -18,7 +18,7 @@ #include <linux/module.h> #include <linux/init.h> - +#include <linux/sched.h> #include <linux/binfmts.h> #include <linux/slab.h> #include <linux/ctype.h> diff --git a/fs/block_dev.c b/fs/block_dev.c index 742899240872ff..ea1480a16f517d 100644 --- a/fs/block_dev.c +++ b/fs/block_dev.c @@ -458,17 +458,15 @@ static void init_once(void * foo, struct kmem_cache * cachep, unsigned long flag struct bdev_inode *ei = (struct bdev_inode *) foo; struct block_device *bdev = &ei->bdev; - if (flags & SLAB_CTOR_CONSTRUCTOR) { - memset(bdev, 0, sizeof(*bdev)); - mutex_init(&bdev->bd_mutex); - sema_init(&bdev->bd_mount_sem, 1); - INIT_LIST_HEAD(&bdev->bd_inodes); - INIT_LIST_HEAD(&bdev->bd_list); + memset(bdev, 0, sizeof(*bdev)); + mutex_init(&bdev->bd_mutex); + sema_init(&bdev->bd_mount_sem, 1); + INIT_LIST_HEAD(&bdev->bd_inodes); + INIT_LIST_HEAD(&bdev->bd_list); #ifdef CONFIG_SYSFS - INIT_LIST_HEAD(&bdev->bd_holder_list); + INIT_LIST_HEAD(&bdev->bd_holder_list); #endif - inode_init_once(&ei->vfs_inode); - } + inode_init_once(&ei->vfs_inode); } static inline void __bd_forget(struct inode *inode) diff --git a/fs/buffer.c b/fs/buffer.c index aecd057cd0e060..aa68206bd51792 100644 --- a/fs/buffer.c +++ b/fs/buffer.c @@ -981,7 +981,8 @@ grow_dev_page(struct block_device *bdev, sector_t block, struct page *page; struct buffer_head *bh; - page = find_or_create_page(inode->i_mapping, index, GFP_NOFS); + page = find_or_create_page(inode->i_mapping, index, + mapping_gfp_mask(inode->i_mapping) & ~__GFP_FS); if (!page) return NULL; @@ -2100,7 +2101,7 @@ int cont_prepare_write(struct page *page, unsigned offset, PAGE_CACHE_SIZE, get_block); if (status) goto out_unmap; - zero_user_page(page, zerofrom, PAGE_CACHE_SIZE - zerofrom, + zero_user_page(new_page, zerofrom, PAGE_CACHE_SIZE - zerofrom, KM_USER0); generic_commit_write(NULL, new_page, zerofrom, PAGE_CACHE_SIZE); unlock_page(new_page); @@ -2898,8 +2899,9 @@ static void recalc_bh_state(void) struct buffer_head *alloc_buffer_head(gfp_t gfp_flags) { - struct buffer_head *ret = kmem_cache_alloc(bh_cachep, gfp_flags); + struct buffer_head *ret = kmem_cache_zalloc(bh_cachep, gfp_flags); if (ret) { + INIT_LIST_HEAD(&ret->b_assoc_buffers); get_cpu_var(bh_accounting).nr++; recalc_bh_state(); put_cpu_var(bh_accounting); @@ -2918,17 +2920,6 @@ void free_buffer_head(struct buffer_head *bh) } EXPORT_SYMBOL(free_buffer_head); -static void -init_buffer_head(void *data, struct kmem_cache *cachep, unsigned long flags) -{ - if (flags & SLAB_CTOR_CONSTRUCTOR) { - struct buffer_head * bh = (struct buffer_head *)data; - - memset(bh, 0, sizeof(*bh)); - INIT_LIST_HEAD(&bh->b_assoc_buffers); - } -} - static void buffer_exit_cpu(int cpu) { int i; @@ -2955,12 +2946,8 @@ void __init buffer_init(void) { int nrpages; - bh_cachep = kmem_cache_create("buffer_head", - sizeof(struct buffer_head), 0, - (SLAB_RECLAIM_ACCOUNT|SLAB_PANIC| - SLAB_MEM_SPREAD), - init_buffer_head, - NULL); + bh_cachep = KMEM_CACHE(buffer_head, + SLAB_RECLAIM_ACCOUNT|SLAB_PANIC|SLAB_MEM_SPREAD); /* * Limit the bh occupancy to 10% of ZONE_NORMAL diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index 8568e100953cd5..d38c69b591cfe0 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -701,10 +701,8 @@ cifs_init_once(void *inode, struct kmem_cache * cachep, unsigned long flags) { struct cifsInodeInfo *cifsi = inode; - if (flags & SLAB_CTOR_CONSTRUCTOR) { - inode_init_once(&cifsi->vfs_inode); - INIT_LIST_HEAD(&cifsi->lockList); - } + inode_init_once(&cifsi->vfs_inode); + INIT_LIST_HEAD(&cifsi->lockList); } static int diff --git a/fs/coda/cache.c b/fs/coda/cache.c index 5d0527133266c9..fcb88fa8d2f2f0 100644 --- a/fs/coda/cache.c +++ b/fs/coda/cache.c @@ -16,6 +16,7 @@ #include <asm/uaccess.h> #include <linux/string.h> #include <linux/list.h> +#include <linux/sched.h> #include <linux/coda.h> #include <linux/coda_linux.h> diff --git a/fs/coda/inode.c b/fs/coda/inode.c index 0aaff3651d146a..dbff1bd4fb96b1 100644 --- a/fs/coda/inode.c +++ b/fs/coda/inode.c @@ -62,8 +62,7 @@ static void init_once(void * foo, struct kmem_cache * cachep, unsigned long flag { struct coda_inode_info *ei = (struct coda_inode_info *) foo; - if (flags & SLAB_CTOR_CONSTRUCTOR) - inode_init_once(&ei->vfs_inode); + inode_init_once(&ei->vfs_inode); } int coda_init_inodecache(void) diff --git a/fs/coda/upcall.c b/fs/coda/upcall.c index a5b5e631ba61e6..5faacdb1a47927 100644 --- a/fs/coda/upcall.c +++ b/fs/coda/upcall.c @@ -16,7 +16,7 @@ #include <asm/system.h> #include <linux/signal.h> - +#include <linux/sched.h> #include <linux/types.h> #include <linux/kernel.h> #include <linux/mm.h> diff --git a/fs/compat.c b/fs/compat.c index 7b21b0a82596f7..4db6216e5266a5 100644 --- a/fs/compat.c +++ b/fs/compat.c @@ -1544,9 +1544,10 @@ int compat_core_sys_select(int n, compat_ulong_t __user *inp, compat_ulong_t __user *outp, compat_ulong_t __user *exp, s64 *timeout) { fd_set_bits fds; - char *bits; + void *bits; int size, max_fds, ret = -EINVAL; struct fdtable *fdt; + long stack_fds[SELECT_STACK_ALLOC/sizeof(long)]; if (n < 0) goto out_nofds; @@ -1564,11 +1565,14 @@ int compat_core_sys_select(int n, compat_ulong_t __user *inp, * since we used fdset we need to allocate memory in units of * long-words. */ - ret = -ENOMEM; size = FDS_BYTES(n); - bits = kmalloc(6 * size, GFP_KERNEL); - if (!bits) - goto out_nofds; + bits = stack_fds; + if (size > sizeof(stack_fds) / 6) { + bits = kmalloc(6 * size, GFP_KERNEL); + ret = -ENOMEM; + if (!bits) + goto out_nofds; + } fds.in = (unsigned long *) bits; fds.out = (unsigned long *) (bits + size); fds.ex = (unsigned long *) (bits + 2*size); @@ -1600,7 +1604,8 @@ int compat_core_sys_select(int n, compat_ulong_t __user *inp, compat_set_fd_set(n, exp, fds.res_ex)) ret = -EFAULT; out: - kfree(bits); + if (bits != stack_fds) + kfree(bits); out_nofds: return ret; } @@ -2230,21 +2235,16 @@ asmlinkage long compat_sys_signalfd(int ufd, asmlinkage long compat_sys_timerfd(int ufd, int clockid, int flags, const struct compat_itimerspec __user *utmr) { - long res; struct itimerspec t; struct itimerspec __user *ut; - res = -EFAULT; if (get_compat_itimerspec(&t, utmr)) - goto err_exit; + return -EFAULT; ut = compat_alloc_user_space(sizeof(*ut)); - if (copy_to_user(ut, &t, sizeof(t)) ) - goto err_exit; + if (copy_to_user(ut, &t, sizeof(t))) + return -EFAULT; - res = sys_timerfd(ufd, clockid, flags, ut); -err_exit: - return res; + return sys_timerfd(ufd, clockid, flags, ut); } #endif /* CONFIG_TIMERFD */ - diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c index 65643def31825d..6b44cdc96facd5 100644 --- a/fs/compat_ioctl.c +++ b/fs/compat_ioctl.c @@ -1194,6 +1194,7 @@ static int vt_check(struct file *file) { struct tty_struct *tty; struct inode *inode = file->f_path.dentry->d_inode; + struct vc_data *vc; if (file->f_op->ioctl != tty_ioctl) return -EINVAL; @@ -1204,12 +1205,16 @@ static int vt_check(struct file *file) if (tty->driver->ioctl != vt_ioctl) return -EINVAL; - + + vc = (struct vc_data *)tty->driver_data; + if (!vc_cons_allocated(vc->vc_num)) /* impossible? */ + return -ENOIOCTLCMD; + /* * To have permissions to do most of the vt ioctls, we either have - * to be the owner of the tty, or super-user. + * to be the owner of the tty, or have CAP_SYS_TTY_CONFIG. */ - if (current->signal->tty == tty || capable(CAP_SYS_ADMIN)) + if (current->signal->tty == tty || capable(CAP_SYS_TTY_CONFIG)) return 1; return 0; } @@ -1310,16 +1315,28 @@ static int do_unimap_ioctl(unsigned int fd, unsigned int cmd, unsigned long arg, struct unimapdesc32 tmp; struct unimapdesc32 __user *user_ud = compat_ptr(arg); int perm = vt_check(file); - - if (perm < 0) return perm; + struct vc_data *vc; + + if (perm < 0) + return perm; if (copy_from_user(&tmp, user_ud, sizeof tmp)) return -EFAULT; + if (tmp.entries) + if (!access_ok(VERIFY_WRITE, compat_ptr(tmp.entries), + tmp.entry_ct*sizeof(struct unipair))) + return -EFAULT; + vc = ((struct tty_struct *)file->private_data)->driver_data; switch (cmd) { case PIO_UNIMAP: - if (!perm) return -EPERM; - return con_set_unimap(vc_cons[fg_console].d, tmp.entry_ct, compat_ptr(tmp.entries)); + if (!perm) + return -EPERM; + return con_set_unimap(vc, tmp.entry_ct, + compat_ptr(tmp.entries)); case GIO_UNIMAP: - return con_get_unimap(vc_cons[fg_console].d, tmp.entry_ct, &(user_ud->entry_ct), compat_ptr(tmp.entries)); + if (!perm && fg_console != vc->vc_num) + return -EPERM; + return con_get_unimap(vc, tmp.entry_ct, &(user_ud->entry_ct), + compat_ptr(tmp.entries)); } return 0; } diff --git a/fs/configfs/inode.c b/fs/configfs/inode.c index 2ec9beac17cffd..ddc003a9d21439 100644 --- a/fs/configfs/inode.c +++ b/fs/configfs/inode.c @@ -32,6 +32,7 @@ #include <linux/namei.h> #include <linux/backing-dev.h> #include <linux/capability.h> +#include <linux/sched.h> #include <linux/configfs.h> #include "configfs_internal.h" diff --git a/fs/dquot.c b/fs/dquot.c index 3a995841de90e0..8819d281500c97 100644 --- a/fs/dquot.c +++ b/fs/dquot.c @@ -1421,7 +1421,7 @@ int vfs_quota_off(struct super_block *sb, int type) /* If quota was reenabled in the meantime, we have * nothing to do */ if (!sb_has_quota_enabled(sb, cnt)) { - mutex_lock(&toputinode[cnt]->i_mutex); + mutex_lock_nested(&toputinode[cnt]->i_mutex, I_MUTEX_QUOTA); toputinode[cnt]->i_flags &= ~(S_IMMUTABLE | S_NOATIME | S_NOQUOTA); truncate_inode_pages(&toputinode[cnt]->i_data, 0); diff --git a/fs/ecryptfs/file.c b/fs/ecryptfs/file.c index 9881b5c5de59b6..59288d81707887 100644 --- a/fs/ecryptfs/file.c +++ b/fs/ecryptfs/file.c @@ -33,63 +33,6 @@ #include "ecryptfs_kernel.h" /** - * ecryptfs_llseek - * @file: File we are seeking in - * @offset: The offset to seek to - * @origin: 2 - offset from i_size; 1 - offset from f_pos - * - * Returns the position we have seeked to, or negative on error - */ -static loff_t ecryptfs_llseek(struct file *file, loff_t offset, int origin) -{ - loff_t rv; - loff_t new_end_pos; - int rc; - int expanding_file = 0; - struct inode *inode = file->f_mapping->host; - - /* If our offset is past the end of our file, we're going to - * need to grow it so we have a valid length of 0's */ - new_end_pos = offset; - switch (origin) { - case 2: - new_end_pos += i_size_read(inode); - expanding_file = 1; - break; - case 1: - new_end_pos += file->f_pos; - if (new_end_pos > i_size_read(inode)) { - ecryptfs_printk(KERN_DEBUG, "new_end_pos(=[0x%.16x]) " - "> i_size_read(inode)(=[0x%.16x])\n", - new_end_pos, i_size_read(inode)); - expanding_file = 1; - } - break; - default: - if (new_end_pos > i_size_read(inode)) { - ecryptfs_printk(KERN_DEBUG, "new_end_pos(=[0x%.16x]) " - "> i_size_read(inode)(=[0x%.16x])\n", - new_end_pos, i_size_read(inode)); - expanding_file = 1; - } - } - ecryptfs_printk(KERN_DEBUG, "new_end_pos = [0x%.16x]\n", new_end_pos); - if (expanding_file) { - rc = ecryptfs_truncate(file->f_path.dentry, new_end_pos); - if (rc) { - rv = rc; - ecryptfs_printk(KERN_ERR, "Error on attempt to " - "truncate to (higher) offset [0x%.16x];" - " rc = [%d]\n", new_end_pos, rc); - goto out; - } - } - rv = generic_file_llseek(file, offset, origin); -out: - return rv; -} - -/** * ecryptfs_read_update_atime * * generic_file_read updates the atime of upper layer inode. But, it @@ -425,7 +368,7 @@ const struct file_operations ecryptfs_dir_fops = { }; const struct file_operations ecryptfs_main_fops = { - .llseek = ecryptfs_llseek, + .llseek = generic_file_llseek, .read = do_sync_read, .aio_read = ecryptfs_read_update_atime, .write = do_sync_write, diff --git a/fs/ecryptfs/main.c b/fs/ecryptfs/main.c index 8cbf3f69ebe5a3..606128f5c927d3 100644 --- a/fs/ecryptfs/main.c +++ b/fs/ecryptfs/main.c @@ -583,8 +583,7 @@ inode_info_init_once(void *vptr, struct kmem_cache *cachep, unsigned long flags) { struct ecryptfs_inode_info *ei = (struct ecryptfs_inode_info *)vptr; - if (flags & SLAB_CTOR_CONSTRUCTOR) - inode_init_once(&ei->vfs_inode); + inode_init_once(&ei->vfs_inode); } static struct ecryptfs_cache_info { diff --git a/fs/ecryptfs/messaging.c b/fs/ecryptfs/messaging.c index 3baf253be95ad5..a9d87c47f72dfd 100644 --- a/fs/ecryptfs/messaging.c +++ b/fs/ecryptfs/messaging.c @@ -19,7 +19,7 @@ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA * 02111-1307, USA. */ - +#include <linux/sched.h> #include "ecryptfs_kernel.h" static LIST_HEAD(ecryptfs_msg_ctx_free_list); diff --git a/fs/ecryptfs/mmap.c b/fs/ecryptfs/mmap.c index 0770c4b66f53d8..55cec98a84e75c 100644 --- a/fs/ecryptfs/mmap.c +++ b/fs/ecryptfs/mmap.c @@ -364,25 +364,43 @@ static int fill_zeros_to_end_of_page(struct page *page, unsigned int to) { struct inode *inode = page->mapping->host; int end_byte_in_page; - char *page_virt; if ((i_size_read(inode) / PAGE_CACHE_SIZE) != page->index) goto out; end_byte_in_page = i_size_read(inode) % PAGE_CACHE_SIZE; if (to > end_byte_in_page) end_byte_in_page = to; - page_virt = kmap_atomic(page, KM_USER0); - memset((page_virt + end_byte_in_page), 0, - (PAGE_CACHE_SIZE - end_byte_in_page)); - kunmap_atomic(page_virt, KM_USER0); - flush_dcache_page(page); + zero_user_page(page, end_byte_in_page, + PAGE_CACHE_SIZE - end_byte_in_page, KM_USER0); out: return 0; } +/** + * eCryptfs does not currently support holes. When writing after a + * seek past the end of the file, eCryptfs fills in 0's through to the + * current location. The code to fill in the 0's to all the + * intermediate pages calls ecryptfs_prepare_write_no_truncate(). + */ +static int +ecryptfs_prepare_write_no_truncate(struct file *file, struct page *page, + unsigned from, unsigned to) +{ + int rc = 0; + + if (from == 0 && to == PAGE_CACHE_SIZE) + goto out; /* If we are writing a full page, it will be + up to date. */ + if (!PageUptodate(page)) + rc = ecryptfs_do_readpage(file, page, page->index); +out: + return rc; +} + static int ecryptfs_prepare_write(struct file *file, struct page *page, unsigned from, unsigned to) { + loff_t pos; int rc = 0; if (from == 0 && to == PAGE_CACHE_SIZE) @@ -390,6 +408,16 @@ static int ecryptfs_prepare_write(struct file *file, struct page *page, up to date. */ if (!PageUptodate(page)) rc = ecryptfs_do_readpage(file, page, page->index); + pos = ((loff_t)page->index << PAGE_CACHE_SHIFT) + to; + if (pos > i_size_read(page->mapping->host)) { + rc = ecryptfs_truncate(file->f_path.dentry, pos); + if (rc) { + printk(KERN_ERR "Error on attempt to " + "truncate to (higher) offset [%lld];" + " rc = [%d]\n", pos, rc); + goto out; + } + } out: return rc; } @@ -740,7 +768,6 @@ int write_zeros(struct file *file, pgoff_t index, int start, int num_zeros) { int rc = 0; struct page *tmp_page; - char *tmp_page_virt; tmp_page = ecryptfs_get1page(file, index); if (IS_ERR(tmp_page)) { @@ -749,18 +776,15 @@ int write_zeros(struct file *file, pgoff_t index, int start, int num_zeros) rc = PTR_ERR(tmp_page); goto out; } - rc = ecryptfs_prepare_write(file, tmp_page, start, start + num_zeros); - if (rc) { + if ((rc = ecryptfs_prepare_write_no_truncate(file, tmp_page, start, + (start + num_zeros)))) { ecryptfs_printk(KERN_ERR, "Error preparing to write zero's " - "to remainder of page at index [0x%.16x]\n", + "to page at index [0x%.16x]\n", index); page_cache_release(tmp_page); goto out; } - tmp_page_virt = kmap_atomic(tmp_page, KM_USER0); - memset(((char *)tmp_page_virt + start), 0, num_zeros); - kunmap_atomic(tmp_page_virt, KM_USER0); - flush_dcache_page(tmp_page); + zero_user_page(tmp_page, start, num_zeros, KM_USER0); rc = ecryptfs_commit_write(file, tmp_page, start, start + num_zeros); if (rc < 0) { ecryptfs_printk(KERN_ERR, "Error attempting to write zero's " diff --git a/fs/efs/super.c b/fs/efs/super.c index ba7a8b9da0c166..e0a6839e68ae0f 100644 --- a/fs/efs/super.c +++ b/fs/efs/super.c @@ -72,8 +72,7 @@ static void init_once(void * foo, struct kmem_cache * cachep, unsigned long flag { struct efs_inode_info *ei = (struct efs_inode_info *) foo; - if (flags & SLAB_CTOR_CONSTRUCTOR) - inode_init_once(&ei->vfs_inode); + inode_init_once(&ei->vfs_inode); } static int init_inodecache(void) diff --git a/fs/eventfd.c b/fs/eventfd.c index 480e2b3c4166a8..2ce19c000d2adb 100644 --- a/fs/eventfd.c +++ b/fs/eventfd.c @@ -17,7 +17,6 @@ #include <linux/eventfd.h> struct eventfd_ctx { - spinlock_t lock; wait_queue_head_t wqh; /* * Every time that a write(2) is performed on an eventfd, the @@ -45,13 +44,13 @@ int eventfd_signal(struct file *file, int n) if (n < 0) return -EINVAL; - spin_lock_irqsave(&ctx->lock, flags); + spin_lock_irqsave(&ctx->wqh.lock, flags); if (ULLONG_MAX - ctx->count < n) n = (int) (ULLONG_MAX - ctx->count); ctx->count += n; if (waitqueue_active(&ctx->wqh)) wake_up_locked(&ctx->wqh); - spin_unlock_irqrestore(&ctx->lock, flags); + spin_unlock_irqrestore(&ctx->wqh.lock, flags); return n; } @@ -70,14 +69,14 @@ static unsigned int eventfd_poll(struct file *file, poll_table *wait) poll_wait(file, &ctx->wqh, wait); - spin_lock_irqsave(&ctx->lock, flags); + spin_lock_irqsave(&ctx->wqh.lock, flags); if (ctx->count > 0) events |= POLLIN; if (ctx->count == ULLONG_MAX) events |= POLLERR; if (ULLONG_MAX - 1 > ctx->count) events |= POLLOUT; - spin_unlock_irqrestore(&ctx->lock, flags); + spin_unlock_irqrestore(&ctx->wqh.lock, flags); return events; } @@ -92,7 +91,7 @@ static ssize_t eventfd_read(struct file *file, char __user *buf, size_t count, if (count < sizeof(ucnt)) return -EINVAL; - spin_lock_irq(&ctx->lock); + spin_lock_irq(&ctx->wqh.lock); res = -EAGAIN; ucnt = ctx->count; if (ucnt > 0) @@ -110,9 +109,9 @@ static ssize_t eventfd_read(struct file *file, char __user *buf, size_t count, res = -ERESTARTSYS; break; } - spin_unlock_irq(&ctx->lock); + spin_unlock_irq(&ctx->wqh.lock); schedule(); - spin_lock_irq(&ctx->lock); + spin_lock_irq(&ctx->wqh.lock); } __remove_wait_queue(&ctx->wqh, &wait); __set_current_state(TASK_RUNNING); @@ -122,7 +121,7 @@ static ssize_t eventfd_read(struct file *file, char __user *buf, size_t count, if (waitqueue_active(&ctx->wqh)) wake_up_locked(&ctx->wqh); } - spin_unlock_irq(&ctx->lock); + spin_unlock_irq(&ctx->wqh.lock); if (res > 0 && put_user(ucnt, (__u64 __user *) buf)) return -EFAULT; @@ -143,7 +142,7 @@ static ssize_t eventfd_write(struct file *file, const char __user *buf, size_t c return -EFAULT; if (ucnt == ULLONG_MAX) return -EINVAL; - spin_lock_irq(&ctx->lock); + spin_lock_irq(&ctx->wqh.lock); res = -EAGAIN; if (ULLONG_MAX - ctx->count > ucnt) res = sizeof(ucnt); @@ -159,9 +158,9 @@ static ssize_t eventfd_write(struct file *file, const char __user *buf, size_t c res = -ERESTARTSYS; break; } - spin_unlock_irq(&ctx->lock); + spin_unlock_irq(&ctx->wqh.lock); schedule(); - spin_lock_irq(&ctx->lock); + spin_lock_irq(&ctx->wqh.lock); } __remove_wait_queue(&ctx->wqh, &wait); __set_current_state(TASK_RUNNING); @@ -171,7 +170,7 @@ static ssize_t eventfd_write(struct file *file, const char __user *buf, size_t c if (waitqueue_active(&ctx->wqh)) wake_up_locked(&ctx->wqh); } - spin_unlock_irq(&ctx->lock); + spin_unlock_irq(&ctx->wqh.lock); return res; } @@ -210,7 +209,6 @@ asmlinkage long sys_eventfd(unsigned int count) return -ENOMEM; init_waitqueue_head(&ctx->wqh); - spin_lock_init(&ctx->lock); ctx->count = count; /* diff --git a/fs/exec.c b/fs/exec.c index 70fa36554c1423..f20561ff4528f2 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -60,7 +60,7 @@ #endif int core_uses_pid; -char core_pattern[128] = "core"; +char core_pattern[CORENAME_MAX_SIZE] = "core"; int suid_dumpable = 0; EXPORT_SYMBOL(suid_dumpable); @@ -134,6 +134,9 @@ asmlinkage long sys_uselib(const char __user * library) if (error) goto out; + error = -EACCES; + if (nd.mnt->mnt_flags & MNT_NOEXEC) + goto exit; error = -EINVAL; if (!S_ISREG(nd.dentry->d_inode->i_mode)) goto exit; @@ -1264,8 +1267,6 @@ int set_binfmt(struct linux_binfmt *new) EXPORT_SYMBOL(set_binfmt); -#define CORENAME_MAX_SIZE 64 - /* format_corename will inspect the pattern parameter, and output a * name into corename, which must have space for at least * CORENAME_MAX_SIZE bytes plus one byte for the zero terminator. diff --git a/fs/ext2/super.c b/fs/ext2/super.c index 685a1c287177f6..16337bff0272e1 100644 --- a/fs/ext2/super.c +++ b/fs/ext2/super.c @@ -160,13 +160,11 @@ static void init_once(void * foo, struct kmem_cache * cachep, unsigned long flag { struct ext2_inode_info *ei = (struct ext2_inode_info *) foo; - if (flags & SLAB_CTOR_CONSTRUCTOR) { - rwlock_init(&ei->i_meta_lock); + rwlock_init(&ei->i_meta_lock); #ifdef CONFIG_EXT2_FS_XATTR - init_rwsem(&ei->xattr_sem); + init_rwsem(&ei->xattr_sem); #endif - inode_init_once(&ei->vfs_inode); - } + inode_init_once(&ei->vfs_inode); } static int init_inodecache(void) diff --git a/fs/ext3/super.c b/fs/ext3/super.c index 54d3c90412598f..6e3062913a92f5 100644 --- a/fs/ext3/super.c +++ b/fs/ext3/super.c @@ -466,14 +466,12 @@ static void init_once(void * foo, struct kmem_cache * cachep, unsigned long flag { struct ext3_inode_info *ei = (struct ext3_inode_info *) foo; - if (flags & SLAB_CTOR_CONSTRUCTOR) { - INIT_LIST_HEAD(&ei->i_orphan); + INIT_LIST_HEAD(&ei->i_orphan); #ifdef CONFIG_EXT3_FS_XATTR - init_rwsem(&ei->xattr_sem); + init_rwsem(&ei->xattr_sem); #endif - mutex_init(&ei->truncate_mutex); - inode_init_once(&ei->vfs_inode); - } + mutex_init(&ei->truncate_mutex); + inode_init_once(&ei->vfs_inode); } static int init_inodecache(void) diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 71912693235487..cb9afdd0e26e5f 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -517,14 +517,12 @@ static void init_once(void * foo, struct kmem_cache * cachep, unsigned long flag { struct ext4_inode_info *ei = (struct ext4_inode_info *) foo; - if (flags & SLAB_CTOR_CONSTRUCTOR) { - INIT_LIST_HEAD(&ei->i_orphan); + INIT_LIST_HEAD(&ei->i_orphan); #ifdef CONFIG_EXT4DEV_FS_XATTR - init_rwsem(&ei->xattr_sem); + init_rwsem(&ei->xattr_sem); #endif - mutex_init(&ei->truncate_mutex); - inode_init_once(&ei->vfs_inode); - } + mutex_init(&ei->truncate_mutex); + inode_init_once(&ei->vfs_inode); } static int init_inodecache(void) diff --git a/fs/fat/cache.c b/fs/fat/cache.c index 1959143c1d27ad..3c9c8a15ec73fe 100644 --- a/fs/fat/cache.c +++ b/fs/fat/cache.c @@ -40,8 +40,7 @@ static void init_once(void *foo, struct kmem_cache *cachep, unsigned long flags) { struct fat_cache *cache = (struct fat_cache *)foo; - if (flags & SLAB_CTOR_CONSTRUCTOR) - INIT_LIST_HEAD(&cache->cache_list); + INIT_LIST_HEAD(&cache->cache_list); } int __init fat_cache_init(void) diff --git a/fs/fat/inode.c b/fs/fat/inode.c index 2c55e8dce7932c..479722d8966734 100644 --- a/fs/fat/inode.c +++ b/fs/fat/inode.c @@ -500,14 +500,12 @@ static void init_once(void * foo, struct kmem_cache * cachep, unsigned long flag { struct msdos_inode_info *ei = (struct msdos_inode_info *)foo; - if (flags & SLAB_CTOR_CONSTRUCTOR) { - spin_lock_init(&ei->cache_lru_lock); - ei->nr_caches = 0; - ei->cache_valid_id = FAT_CACHE_VALID + 1; - INIT_LIST_HEAD(&ei->cache_lru); - INIT_HLIST_NODE(&ei->i_fat_hash); - inode_init_once(&ei->vfs_inode); - } + spin_lock_init(&ei->cache_lru_lock); + ei->nr_caches = 0; + ei->cache_valid_id = FAT_CACHE_VALID + 1; + INIT_LIST_HEAD(&ei->cache_lru); + INIT_HLIST_NODE(&ei->i_fat_hash); + inode_init_once(&ei->vfs_inode); } static int __init fat_init_inodecache(void) diff --git a/fs/fifo.c b/fs/fifo.c index 6e7df725678237..9785e36f81e730 100644 --- a/fs/fifo.c +++ b/fs/fifo.c @@ -12,6 +12,7 @@ #include <linux/mm.h> #include <linux/slab.h> #include <linux/fs.h> +#include <linux/sched.h> #include <linux/pipe_fs_i.h> static void wait_for_partner(struct inode* inode, unsigned int *cnt) diff --git a/fs/fuse/dir.c b/fs/fuse/dir.c index 8890eba1db524d..bd5a772d8ccf09 100644 --- a/fs/fuse/dir.c +++ b/fs/fuse/dir.c @@ -485,7 +485,7 @@ static int fuse_mknod(struct inode *dir, struct dentry *entry, int mode, static int fuse_create(struct inode *dir, struct dentry *entry, int mode, struct nameidata *nd) { - if (nd && (nd->flags & LOOKUP_CREATE)) { + if (nd && (nd->flags & LOOKUP_OPEN)) { int err = fuse_create_open(dir, entry, mode, nd); if (err != -ENOSYS) return err; diff --git a/fs/fuse/file.c b/fs/fuse/file.c index acfad65a6e8e20..adf7995232b8b8 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -11,6 +11,7 @@ #include <linux/pagemap.h> #include <linux/slab.h> #include <linux/kernel.h> +#include <linux/sched.h> static const struct file_operations fuse_direct_io_file_operations; @@ -609,7 +610,9 @@ static ssize_t fuse_direct_write(struct file *file, const char __user *buf, ssize_t res; /* Don't allow parallel writes to the same file */ mutex_lock(&inode->i_mutex); - res = fuse_direct_io(file, buf, count, ppos, 1); + res = generic_write_checks(file, ppos, &count, 0); + if (!res) + res = fuse_direct_io(file, buf, count, ppos, 1); mutex_unlock(&inode->i_mutex); return res; } diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c index 1397018ff47665..9804c0cdcb4200 100644 --- a/fs/fuse/inode.c +++ b/fs/fuse/inode.c @@ -17,6 +17,7 @@ #include <linux/parser.h> #include <linux/statfs.h> #include <linux/random.h> +#include <linux/sched.h> MODULE_AUTHOR("Miklos Szeredi <miklos@szeredi.hu>"); MODULE_DESCRIPTION("Filesystem in Userspace"); @@ -453,6 +454,7 @@ static const struct super_operations fuse_super_operations = { .destroy_inode = fuse_destroy_inode, .read_inode = fuse_read_inode, .clear_inode = fuse_clear_inode, + .drop_inode = generic_delete_inode, .remount_fs = fuse_remount_fs, .put_super = fuse_put_super, .umount_begin = fuse_umount_begin, @@ -687,8 +689,7 @@ static void fuse_inode_init_once(void *foo, struct kmem_cache *cachep, { struct inode * inode = foo; - if (flags & SLAB_CTOR_CONSTRUCTOR) - inode_init_once(inode); + inode_init_once(inode); } static int __init fuse_fs_init(void) diff --git a/fs/gfs2/glock.h b/fs/gfs2/glock.h index 11477ca3a3c00c..b3e152db70c8b9 100644 --- a/fs/gfs2/glock.h +++ b/fs/gfs2/glock.h @@ -10,6 +10,7 @@ #ifndef __GLOCK_DOT_H__ #define __GLOCK_DOT_H__ +#include <linux/sched.h> #include "incore.h" /* Flags for lock requests; used in gfs2_holder gh_flag field. diff --git a/fs/gfs2/main.c b/fs/gfs2/main.c index e460487c055742..787a0edef10050 100644 --- a/fs/gfs2/main.c +++ b/fs/gfs2/main.c @@ -27,29 +27,27 @@ static void gfs2_init_inode_once(void *foo, struct kmem_cache *cachep, unsigned long flags) { struct gfs2_inode *ip = foo; - if (flags & SLAB_CTOR_CONSTRUCTOR) { - inode_init_once(&ip->i_inode); - spin_lock_init(&ip->i_spin); - init_rwsem(&ip->i_rw_mutex); - memset(ip->i_cache, 0, sizeof(ip->i_cache)); - } + + inode_init_once(&ip->i_inode); + spin_lock_init(&ip->i_spin); + init_rwsem(&ip->i_rw_mutex); + memset(ip->i_cache, 0, sizeof(ip->i_cache)); } static void gfs2_init_glock_once(void *foo, struct kmem_cache *cachep, unsigned long flags) { struct gfs2_glock *gl = foo; - if (flags & SLAB_CTOR_CONSTRUCTOR) { - INIT_HLIST_NODE(&gl->gl_list); - spin_lock_init(&gl->gl_spin); - INIT_LIST_HEAD(&gl->gl_holders); - INIT_LIST_HEAD(&gl->gl_waiters1); - INIT_LIST_HEAD(&gl->gl_waiters3); - gl->gl_lvb = NULL; - atomic_set(&gl->gl_lvb_count, 0); - INIT_LIST_HEAD(&gl->gl_reclaim); - INIT_LIST_HEAD(&gl->gl_ail_list); - atomic_set(&gl->gl_ail_count, 0); - } + + INIT_HLIST_NODE(&gl->gl_list); + spin_lock_init(&gl->gl_spin); + INIT_LIST_HEAD(&gl->gl_holders); + INIT_LIST_HEAD(&gl->gl_waiters1); + INIT_LIST_HEAD(&gl->gl_waiters3); + gl->gl_lvb = NULL; + atomic_set(&gl->gl_lvb_count, 0); + INIT_LIST_HEAD(&gl->gl_reclaim); + INIT_LIST_HEAD(&gl->gl_ail_list); + atomic_set(&gl->gl_ail_count, 0); } /** diff --git a/fs/hfs/inode.c b/fs/hfs/inode.c index fafcba59387188..9a934db0bd8ae9 100644 --- a/fs/hfs/inode.c +++ b/fs/hfs/inode.c @@ -13,6 +13,7 @@ #include <linux/pagemap.h> #include <linux/mpage.h> +#include <linux/sched.h> #include "hfs_fs.h" #include "btree.h" diff --git a/fs/hfs/super.c b/fs/hfs/super.c index 4f1888f16cf0b0..92cf8751e42872 100644 --- a/fs/hfs/super.c +++ b/fs/hfs/super.c @@ -434,8 +434,7 @@ static void hfs_init_once(void *p, struct kmem_cache *cachep, unsigned long flag { struct hfs_inode_info *i = p; - if (flags & SLAB_CTOR_CONSTRUCTOR) - inode_init_once(&i->vfs_inode); + inode_init_once(&i->vfs_inode); } static int __init init_hfs_fs(void) diff --git a/fs/hfsplus/inode.c b/fs/hfsplus/inode.c index 642012ac337013..45dab5d6cc10a2 100644 --- a/fs/hfsplus/inode.c +++ b/fs/hfsplus/inode.c @@ -12,6 +12,7 @@ #include <linux/fs.h> #include <linux/pagemap.h> #include <linux/mpage.h> +#include <linux/sched.h> #include "hfsplus_fs.h" #include "hfsplus_raw.h" diff --git a/fs/hfsplus/super.c b/fs/hfsplus/super.c index 37afbec8a76127..ebd1b380cbbc9d 100644 --- a/fs/hfsplus/super.c +++ b/fs/hfsplus/super.c @@ -470,8 +470,7 @@ static void hfsplus_init_once(void *p, struct kmem_cache *cachep, unsigned long { struct hfsplus_inode_info *i = p; - if (flags & SLAB_CTOR_CONSTRUCTOR) - inode_init_once(&i->vfs_inode); + inode_init_once(&i->vfs_inode); } static int __init init_hfsplus_fs(void) diff --git a/fs/hpfs/buffer.c b/fs/hpfs/buffer.c index b52b7381d10f45..b6fca543544c5a 100644 --- a/fs/hpfs/buffer.c +++ b/fs/hpfs/buffer.c @@ -5,7 +5,7 @@ * * general buffer i/o */ - +#include <linux/sched.h> #include "hpfs_fn.h" void hpfs_lock_creation(struct super_block *s) diff --git a/fs/hpfs/namei.c b/fs/hpfs/namei.c index 9953cf9a2f16fa..d256559b4104c5 100644 --- a/fs/hpfs/namei.c +++ b/fs/hpfs/namei.c @@ -5,7 +5,7 @@ * * adding & removing files & directories */ - +#include <linux/sched.h> #include "hpfs_fn.h" static int hpfs_mkdir(struct inode *dir, struct dentry *dentry, int mode) diff --git a/fs/hpfs/super.c b/fs/hpfs/super.c index 1b95f39fbc37a9..29cc34abb2ea96 100644 --- a/fs/hpfs/super.c +++ b/fs/hpfs/super.c @@ -12,6 +12,7 @@ #include <linux/init.h> #include <linux/statfs.h> #include <linux/magic.h> +#include <linux/sched.h> /* Mark the filesystem dirty, so that chkdsk checks it when os/2 booted */ @@ -176,11 +177,9 @@ static void init_once(void * foo, struct kmem_cache * cachep, unsigned long flag { struct hpfs_inode_info *ei = (struct hpfs_inode_info *) foo; - if (flags & SLAB_CTOR_CONSTRUCTOR) { - mutex_init(&ei->i_mutex); - mutex_init(&ei->i_parent_mutex); - inode_init_once(&ei->vfs_inode); - } + mutex_init(&ei->i_mutex); + mutex_init(&ei->i_parent_mutex); + inode_init_once(&ei->vfs_inode); } static int init_inodecache(void) diff --git a/fs/hugetlbfs/inode.c b/fs/hugetlbfs/inode.c index 98959b87cdf8f1..aa083dd34e9241 100644 --- a/fs/hugetlbfs/inode.c +++ b/fs/hugetlbfs/inode.c @@ -556,8 +556,7 @@ static void init_once(void *foo, struct kmem_cache *cachep, unsigned long flags) { struct hugetlbfs_inode_info *ei = (struct hugetlbfs_inode_info *)foo; - if (flags & SLAB_CTOR_CONSTRUCTOR) - inode_init_once(&ei->vfs_inode); + inode_init_once(&ei->vfs_inode); } const struct file_operations hugetlbfs_file_operations = { diff --git a/fs/inode.c b/fs/inode.c index df2ef15d03d256..9a012cc5b6cd6e 100644 --- a/fs/inode.c +++ b/fs/inode.c @@ -213,8 +213,7 @@ static void init_once(void * foo, struct kmem_cache * cachep, unsigned long flag { struct inode * inode = (struct inode *) foo; - if (flags & SLAB_CTOR_CONSTRUCTOR) - inode_init_once(inode); + inode_init_once(inode); } /* diff --git a/fs/isofs/inode.c b/fs/isofs/inode.c index e99f7ff4ecb447..5c3eecf7542ee0 100644 --- a/fs/isofs/inode.c +++ b/fs/isofs/inode.c @@ -77,8 +77,7 @@ static void init_once(void *foo, struct kmem_cache * cachep, unsigned long flags { struct iso_inode_info *ei = foo; - if (flags & SLAB_CTOR_CONSTRUCTOR) - inode_init_once(&ei->vfs_inode); + inode_init_once(&ei->vfs_inode); } static int init_inodecache(void) diff --git a/fs/jffs2/super.c b/fs/jffs2/super.c index 45368f8bbe72d5..6488af43bc9b75 100644 --- a/fs/jffs2/super.c +++ b/fs/jffs2/super.c @@ -47,10 +47,8 @@ static void jffs2_i_init_once(void * foo, struct kmem_cache * cachep, unsigned l { struct jffs2_inode_info *ei = (struct jffs2_inode_info *) foo; - if (flags & SLAB_CTOR_CONSTRUCTOR) { - init_MUTEX(&ei->sem); - inode_init_once(&ei->vfs_inode); - } + init_MUTEX(&ei->sem); + inode_init_once(&ei->vfs_inode); } static int jffs2_sync_fs(struct super_block *sb, int wait) diff --git a/fs/jfs/jfs_metapage.c b/fs/jfs/jfs_metapage.c index 6b3acb0b578118..43d4f69afbeca9 100644 --- a/fs/jfs/jfs_metapage.c +++ b/fs/jfs/jfs_metapage.c @@ -184,16 +184,14 @@ static void init_once(void *foo, struct kmem_cache *cachep, unsigned long flags) { struct metapage *mp = (struct metapage *)foo; - if (flags & SLAB_CTOR_CONSTRUCTOR) { - mp->lid = 0; - mp->lsn = 0; - mp->flag = 0; - mp->data = NULL; - mp->clsn = 0; - mp->log = NULL; - set_bit(META_free, &mp->flag); - init_waitqueue_head(&mp->wait); - } + mp->lid = 0; + mp->lsn = 0; + mp->flag = 0; + mp->data = NULL; + mp->clsn = 0; + mp->log = NULL; + set_bit(META_free, &mp->flag); + init_waitqueue_head(&mp->wait); } static inline struct metapage *alloc_metapage(gfp_t gfp_mask) diff --git a/fs/jfs/super.c b/fs/jfs/super.c index ea9dc3e65dcf76..20e4ac1c79a3ca 100644 --- a/fs/jfs/super.c +++ b/fs/jfs/super.c @@ -752,20 +752,18 @@ static void init_once(void *foo, struct kmem_cache * cachep, unsigned long flags { struct jfs_inode_info *jfs_ip = (struct jfs_inode_info *) foo; - if (flags & SLAB_CTOR_CONSTRUCTOR) { - memset(jfs_ip, 0, sizeof(struct jfs_inode_info)); - INIT_LIST_HEAD(&jfs_ip->anon_inode_list); - init_rwsem(&jfs_ip->rdwrlock); - mutex_init(&jfs_ip->commit_mutex); - init_rwsem(&jfs_ip->xattr_sem); - spin_lock_init(&jfs_ip->ag_lock); - jfs_ip->active_ag = -1; + memset(jfs_ip, 0, sizeof(struct jfs_inode_info)); + INIT_LIST_HEAD(&jfs_ip->anon_inode_list); + init_rwsem(&jfs_ip->rdwrlock); + mutex_init(&jfs_ip->commit_mutex); + init_rwsem(&jfs_ip->xattr_sem); + spin_lock_init(&jfs_ip->ag_lock); + jfs_ip->active_ag = -1; #ifdef CONFIG_JFS_POSIX_ACL - jfs_ip->i_acl = JFS_ACL_NOT_CACHED; - jfs_ip->i_default_acl = JFS_ACL_NOT_CACHED; + jfs_ip->i_acl = JFS_ACL_NOT_CACHED; + jfs_ip->i_default_acl = JFS_ACL_NOT_CACHED; #endif - inode_init_once(&jfs_ip->vfs_inode); - } + inode_init_once(&jfs_ip->vfs_inode); } static int __init init_jfs_fs(void) diff --git a/fs/lockd/clntlock.c b/fs/lockd/clntlock.c index f4d45d4d835b9f..d070b18e539dac 100644 --- a/fs/lockd/clntlock.c +++ b/fs/lockd/clntlock.c @@ -153,7 +153,7 @@ nlmclnt_recovery(struct nlm_host *host) if (!host->h_reclaiming++) { nlm_get_host(host); __module_get(THIS_MODULE); - if (kernel_thread(reclaimer, host, CLONE_KERNEL) < 0) + if (kernel_thread(reclaimer, host, CLONE_FS | CLONE_FILES) < 0) module_put(THIS_MODULE); } } diff --git a/fs/lockd/host.c b/fs/lockd/host.c index ad21c0713efa70..96070bff93fc5c 100644 --- a/fs/lockd/host.c +++ b/fs/lockd/host.c @@ -221,7 +221,7 @@ nlm_bind_host(struct nlm_host *host) host->h_nextrebind - jiffies); } } else { - unsigned long increment = nlmsvc_timeout * HZ; + unsigned long increment = nlmsvc_timeout; struct rpc_timeout timeparms = { .to_initval = increment, .to_increment = increment, diff --git a/fs/lockd/xdr.c b/fs/lockd/xdr.c index 9702956d206cf6..5316e307a49d3a 100644 --- a/fs/lockd/xdr.c +++ b/fs/lockd/xdr.c @@ -586,10 +586,6 @@ static struct rpc_version nlm_version3 = { .procs = nlm_procedures, }; -#ifdef CONFIG_LOCKD_V4 -extern struct rpc_version nlm_version4; -#endif - static struct rpc_version * nlm_versions[] = { [1] = &nlm_version1, [3] = &nlm_version3, diff --git a/fs/lockd/xdr4.c b/fs/lockd/xdr4.c index ce1efdbe1b3a49..846fc1d639ddf9 100644 --- a/fs/lockd/xdr4.c +++ b/fs/lockd/xdr4.c @@ -123,7 +123,8 @@ static __be32 * nlm4_decode_lock(__be32 *p, struct nlm_lock *lock) { struct file_lock *fl = &lock->fl; - __s64 len, start, end; + __u64 len, start; + __s64 end; if (!(p = xdr_decode_string_inplace(p, &lock->caller, &lock->len, NLM_MAXSTRLEN)) @@ -417,7 +418,8 @@ nlm4clt_decode_testres(struct rpc_rqst *req, __be32 *p, struct nlm_res *resp) if (resp->status == nlm_lck_denied) { struct file_lock *fl = &resp->lock.fl; u32 excl; - s64 start, end, len; + __u64 start, len; + __s64 end; memset(&resp->lock, 0, sizeof(resp->lock)); locks_init_lock(fl); diff --git a/fs/locks.c b/fs/locks.c index 8ec16ab5ef7449..431a8b871fcef0 100644 --- a/fs/locks.c +++ b/fs/locks.c @@ -203,9 +203,6 @@ static void init_once(void *foo, struct kmem_cache *cache, unsigned long flags) { struct file_lock *lock = (struct file_lock *) foo; - if (!(flags & SLAB_CTOR_CONSTRUCTOR)) - return; - locks_init_lock(lock); } diff --git a/fs/minix/bitmap.c b/fs/minix/bitmap.c index c4a554df7b7e63..99a12f12776965 100644 --- a/fs/minix/bitmap.c +++ b/fs/minix/bitmap.c @@ -15,6 +15,7 @@ #include <linux/smp_lock.h> #include <linux/buffer_head.h> #include <linux/bitops.h> +#include <linux/sched.h> static int nibblemap[] = { 4,3,3,2,3,2,2,1,3,2,2,1,2,1,1,0 }; diff --git a/fs/minix/inode.c b/fs/minix/inode.c index 2f4d43a2a3105e..be4044614ac833 100644 --- a/fs/minix/inode.c +++ b/fs/minix/inode.c @@ -73,8 +73,7 @@ static void init_once(void * foo, struct kmem_cache * cachep, unsigned long flag { struct minix_inode_info *ei = (struct minix_inode_info *) foo; - if (flags & SLAB_CTOR_CONSTRUCTOR) - inode_init_once(&ei->vfs_inode); + inode_init_once(&ei->vfs_inode); } static int init_inodecache(void) diff --git a/fs/ncpfs/file.c b/fs/ncpfs/file.c index addfd3147ea7a1..d3152f8d95c622 100644 --- a/fs/ncpfs/file.c +++ b/fs/ncpfs/file.c @@ -17,6 +17,7 @@ #include <linux/mm.h> #include <linux/slab.h> #include <linux/vmalloc.h> +#include <linux/sched.h> #include <linux/ncp_fs.h> #include "ncplib_kernel.h" diff --git a/fs/ncpfs/inode.c b/fs/ncpfs/inode.c index c29f00ad495d99..cf06eb9f050e31 100644 --- a/fs/ncpfs/inode.c +++ b/fs/ncpfs/inode.c @@ -60,10 +60,8 @@ static void init_once(void * foo, struct kmem_cache * cachep, unsigned long flag { struct ncp_inode_info *ei = (struct ncp_inode_info *) foo; - if (flags & SLAB_CTOR_CONSTRUCTOR) { - mutex_init(&ei->open_mutex); - inode_init_once(&ei->vfs_inode); - } + mutex_init(&ei->open_mutex); + inode_init_once(&ei->vfs_inode); } static int init_inodecache(void) diff --git a/fs/ncpfs/ioctl.c b/fs/ncpfs/ioctl.c index 8843a83d4ef03d..c67b4bdcf719d0 100644 --- a/fs/ncpfs/ioctl.c +++ b/fs/ncpfs/ioctl.c @@ -17,6 +17,7 @@ #include <linux/highuid.h> #include <linux/smp_lock.h> #include <linux/vmalloc.h> +#include <linux/sched.h> #include <linux/ncp_fs.h> diff --git a/fs/nfs/callback.h b/fs/nfs/callback.h index db3d7919c60131..c2bb14e053e1cb 100644 --- a/fs/nfs/callback.h +++ b/fs/nfs/callback.h @@ -24,7 +24,7 @@ enum nfs4_callback_opnum { }; struct cb_compound_hdr_arg { - int taglen; + unsigned int taglen; const char *tag; unsigned int callback_ident; unsigned nops; @@ -32,7 +32,7 @@ struct cb_compound_hdr_arg { struct cb_compound_hdr_res { __be32 *status; - int taglen; + unsigned int taglen; const char *tag; __be32 *nops; }; diff --git a/fs/nfs/client.c b/fs/nfs/client.c index 50c6821bad269b..881fa490092393 100644 --- a/fs/nfs/client.c +++ b/fs/nfs/client.c @@ -12,7 +12,7 @@ #include <linux/module.h> #include <linux/init.h> - +#include <linux/sched.h> #include <linux/time.h> #include <linux/kernel.h> #include <linux/mm.h> diff --git a/fs/nfs/delegation.c b/fs/nfs/delegation.c index 841c99a9b11c84..7f37d1bea83fc3 100644 --- a/fs/nfs/delegation.c +++ b/fs/nfs/delegation.c @@ -226,7 +226,7 @@ restart: spin_unlock(&clp->cl_lock); } -int nfs_do_expire_all_delegations(void *ptr) +static int nfs_do_expire_all_delegations(void *ptr) { struct nfs_client *clp = ptr; struct nfs_delegation *delegation; diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c index 3df4288165591e..c27258b5d3e16a 100644 --- a/fs/nfs/dir.c +++ b/fs/nfs/dir.c @@ -33,6 +33,7 @@ #include <linux/pagevec.h> #include <linux/namei.h> #include <linux/mount.h> +#include <linux/sched.h> #include "nfs4_fs.h" #include "delegation.h" @@ -607,7 +608,7 @@ static int nfs_readdir(struct file *filp, void *dirent, filldir_t filldir) return res; } -loff_t nfs_llseek_dir(struct file *filp, loff_t offset, int origin) +static loff_t nfs_llseek_dir(struct file *filp, loff_t offset, int origin) { mutex_lock(&filp->f_path.dentry->d_inode->i_mutex); switch (origin) { @@ -633,7 +634,7 @@ out: * All directory operations under NFS are synchronous, so fsync() * is a dummy operation. */ -int nfs_fsync_dir(struct file *filp, struct dentry *dentry, int datasync) +static int nfs_fsync_dir(struct file *filp, struct dentry *dentry, int datasync) { dfprintk(VFS, "NFS: fsync_dir(%s/%s) datasync %d\n", dentry->d_parent->d_name.name, dentry->d_name.name, diff --git a/fs/nfs/direct.c b/fs/nfs/direct.c index 345aa5c0f3824c..00eee87510fe5b 100644 --- a/fs/nfs/direct.c +++ b/fs/nfs/direct.c @@ -122,19 +122,25 @@ ssize_t nfs_direct_IO(int rw, struct kiocb *iocb, const struct iovec *iov, loff_ return -EINVAL; } -static void nfs_direct_dirty_pages(struct page **pages, int npages) +static void nfs_direct_dirty_pages(struct page **pages, unsigned int pgbase, size_t count) { - int i; + unsigned int npages; + unsigned int i; + + if (count == 0) + return; + pages += (pgbase >> PAGE_SHIFT); + npages = (count + (pgbase & ~PAGE_MASK) + PAGE_SIZE - 1) >> PAGE_SHIFT; for (i = 0; i < npages; i++) { struct page *page = pages[i]; if (!PageCompound(page)) - set_page_dirty_lock(page); + set_page_dirty(page); } } -static void nfs_direct_release_pages(struct page **pages, int npages) +static void nfs_direct_release_pages(struct page **pages, unsigned int npages) { - int i; + unsigned int i; for (i = 0; i < npages; i++) page_cache_release(pages[i]); } @@ -162,7 +168,7 @@ static inline struct nfs_direct_req *nfs_direct_req_alloc(void) return dreq; } -static void nfs_direct_req_release(struct kref *kref) +static void nfs_direct_req_free(struct kref *kref) { struct nfs_direct_req *dreq = container_of(kref, struct nfs_direct_req, kref); @@ -171,6 +177,11 @@ static void nfs_direct_req_release(struct kref *kref) kmem_cache_free(nfs_direct_cachep, dreq); } +static void nfs_direct_req_release(struct nfs_direct_req *dreq) +{ + kref_put(&dreq->kref, nfs_direct_req_free); +} + /* * Collects and returns the final error value/byte-count. */ @@ -190,7 +201,6 @@ static ssize_t nfs_direct_wait(struct nfs_direct_req *dreq) result = dreq->count; out: - kref_put(&dreq->kref, nfs_direct_req_release); return (ssize_t) result; } @@ -208,7 +218,7 @@ static void nfs_direct_complete(struct nfs_direct_req *dreq) } complete_all(&dreq->completion); - kref_put(&dreq->kref, nfs_direct_req_release); + nfs_direct_req_release(dreq); } /* @@ -224,17 +234,18 @@ static void nfs_direct_read_result(struct rpc_task *task, void *calldata) if (nfs_readpage_result(task, data) != 0) return; - nfs_direct_dirty_pages(data->pagevec, data->npages); - nfs_direct_release_pages(data->pagevec, data->npages); - spin_lock(&dreq->lock); - - if (likely(task->tk_status >= 0)) - dreq->count += data->res.count; - else + if (unlikely(task->tk_status < 0)) { dreq->error = task->tk_status; - - spin_unlock(&dreq->lock); + spin_unlock(&dreq->lock); + } else { + dreq->count += data->res.count; + spin_unlock(&dreq->lock); + nfs_direct_dirty_pages(data->pagevec, + data->args.pgbase, + data->res.count); + } + nfs_direct_release_pages(data->pagevec, data->npages); if (put_dreq(dreq)) nfs_direct_complete(dreq); @@ -279,9 +290,12 @@ static ssize_t nfs_direct_read_schedule(struct nfs_direct_req *dreq, unsigned lo result = get_user_pages(current, current->mm, user_addr, data->npages, 1, 0, data->pagevec, NULL); up_read(¤t->mm->mmap_sem); - if (unlikely(result < data->npages)) { - if (result > 0) - nfs_direct_release_pages(data->pagevec, result); + if (result < 0) { + nfs_readdata_release(data); + break; + } + if ((unsigned)result < data->npages) { + nfs_direct_release_pages(data->pagevec, result); nfs_readdata_release(data); break; } @@ -359,6 +373,7 @@ static ssize_t nfs_direct_read(struct kiocb *iocb, unsigned long user_addr, size if (!result) result = nfs_direct_wait(dreq); rpc_clnt_sigunmask(clnt, &oldset); + nfs_direct_req_release(dreq); return result; } @@ -610,9 +625,12 @@ static ssize_t nfs_direct_write_schedule(struct nfs_direct_req *dreq, unsigned l result = get_user_pages(current, current->mm, user_addr, data->npages, 0, 0, data->pagevec, NULL); up_read(¤t->mm->mmap_sem); - if (unlikely(result < data->npages)) { - if (result > 0) - nfs_direct_release_pages(data->pagevec, result); + if (result < 0) { + nfs_writedata_release(data); + break; + } + if ((unsigned)result < data->npages) { + nfs_direct_release_pages(data->pagevec, result); nfs_writedata_release(data); break; } @@ -703,6 +721,7 @@ static ssize_t nfs_direct_write(struct kiocb *iocb, unsigned long user_addr, siz if (!result) result = nfs_direct_wait(dreq); rpc_clnt_sigunmask(clnt, &oldset); + nfs_direct_req_release(dreq); return result; } diff --git a/fs/nfs/file.c b/fs/nfs/file.c index 5eaee6dd040b95..9eb8eb4e4a08df 100644 --- a/fs/nfs/file.c +++ b/fs/nfs/file.c @@ -27,6 +27,7 @@ #include <linux/slab.h> #include <linux/pagemap.h> #include <linux/smp_lock.h> +#include <linux/aio.h> #include <asm/uaccess.h> #include <asm/system.h> diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c index 2a3fd9573207ac..bd9f5a8365923c 100644 --- a/fs/nfs/inode.c +++ b/fs/nfs/inode.c @@ -15,7 +15,7 @@ #include <linux/module.h> #include <linux/init.h> - +#include <linux/sched.h> #include <linux/time.h> #include <linux/kernel.h> #include <linux/mm.h> @@ -1164,21 +1164,19 @@ static void init_once(void * foo, struct kmem_cache * cachep, unsigned long flag { struct nfs_inode *nfsi = (struct nfs_inode *) foo; - if (flags & SLAB_CTOR_CONSTRUCTOR) { - inode_init_once(&nfsi->vfs_inode); - spin_lock_init(&nfsi->req_lock); - INIT_LIST_HEAD(&nfsi->dirty); - INIT_LIST_HEAD(&nfsi->commit); - INIT_LIST_HEAD(&nfsi->open_files); - INIT_LIST_HEAD(&nfsi->access_cache_entry_lru); - INIT_LIST_HEAD(&nfsi->access_cache_inode_lru); - INIT_RADIX_TREE(&nfsi->nfs_page_tree, GFP_ATOMIC); - atomic_set(&nfsi->data_updates, 0); - nfsi->ndirty = 0; - nfsi->ncommit = 0; - nfsi->npages = 0; - nfs4_init_once(nfsi); - } + inode_init_once(&nfsi->vfs_inode); + spin_lock_init(&nfsi->req_lock); + INIT_LIST_HEAD(&nfsi->dirty); + INIT_LIST_HEAD(&nfsi->commit); + INIT_LIST_HEAD(&nfsi->open_files); + INIT_LIST_HEAD(&nfsi->access_cache_entry_lru); + INIT_LIST_HEAD(&nfsi->access_cache_inode_lru); + INIT_RADIX_TREE(&nfsi->nfs_page_tree, GFP_ATOMIC); + atomic_set(&nfsi->data_updates, 0); + nfsi->ndirty = 0; + nfsi->ncommit = 0; + nfsi->npages = 0; + nfs4_init_once(nfsi); } static int __init nfs_init_inodecache(void) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index d6a30e965787c3..648e0ac0f90ea0 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -790,7 +790,7 @@ out: return -EACCES; } -int nfs4_recover_expired_lease(struct nfs_server *server) +static int nfs4_recover_expired_lease(struct nfs_server *server) { struct nfs_client *clp = server->nfs_client; int ret; @@ -2748,7 +2748,7 @@ static int nfs4_delay(struct rpc_clnt *clnt, long *timeout) /* This is the error handling routine for processes that are allowed * to sleep. */ -int nfs4_handle_exception(const struct nfs_server *server, int errorcode, struct nfs4_exception *exception) +static int nfs4_handle_exception(const struct nfs_server *server, int errorcode, struct nfs4_exception *exception) { struct nfs_client *clp = server->nfs_client; int ret = errorcode; diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c index 5fffbdfa971f4a..8ed79d5c54f944 100644 --- a/fs/nfs/nfs4state.c +++ b/fs/nfs/nfs4state.c @@ -104,7 +104,7 @@ struct rpc_cred *nfs4_get_renew_cred(struct nfs_client *clp) return cred; } -struct rpc_cred *nfs4_get_setclientid_cred(struct nfs_client *clp) +static struct rpc_cred *nfs4_get_setclientid_cred(struct nfs_client *clp) { struct nfs4_state_owner *sp; diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c index 938f37166788d9..8003c91ccb9a0a 100644 --- a/fs/nfs/nfs4xdr.c +++ b/fs/nfs/nfs4xdr.c @@ -646,10 +646,10 @@ static int encode_close(struct xdr_stream *xdr, const struct nfs_closeargs *arg) { __be32 *p; - RESERVE_SPACE(8+sizeof(arg->stateid->data)); + RESERVE_SPACE(8+NFS4_STATEID_SIZE); WRITE32(OP_CLOSE); WRITE32(arg->seqid->sequence->counter); - WRITEMEM(arg->stateid->data, sizeof(arg->stateid->data)); + WRITEMEM(arg->stateid->data, NFS4_STATEID_SIZE); return 0; } @@ -793,17 +793,17 @@ static int encode_lock(struct xdr_stream *xdr, const struct nfs_lock_args *args) WRITE64(nfs4_lock_length(args->fl)); WRITE32(args->new_lock_owner); if (args->new_lock_owner){ - RESERVE_SPACE(40); + RESERVE_SPACE(4+NFS4_STATEID_SIZE+20); WRITE32(args->open_seqid->sequence->counter); - WRITEMEM(args->open_stateid->data, sizeof(args->open_stateid->data)); + WRITEMEM(args->open_stateid->data, NFS4_STATEID_SIZE); WRITE32(args->lock_seqid->sequence->counter); WRITE64(args->lock_owner.clientid); WRITE32(4); WRITE32(args->lock_owner.id); } else { - RESERVE_SPACE(20); - WRITEMEM(args->lock_stateid->data, sizeof(args->lock_stateid->data)); + RESERVE_SPACE(NFS4_STATEID_SIZE+4); + WRITEMEM(args->lock_stateid->data, NFS4_STATEID_SIZE); WRITE32(args->lock_seqid->sequence->counter); } @@ -830,11 +830,11 @@ static int encode_locku(struct xdr_stream *xdr, const struct nfs_locku_args *arg { __be32 *p; - RESERVE_SPACE(44); + RESERVE_SPACE(12+NFS4_STATEID_SIZE+16); WRITE32(OP_LOCKU); WRITE32(nfs4_lock_type(args->fl, 0)); WRITE32(args->seqid->sequence->counter); - WRITEMEM(args->stateid->data, sizeof(args->stateid->data)); + WRITEMEM(args->stateid->data, NFS4_STATEID_SIZE); WRITE64(args->fl->fl_start); WRITE64(nfs4_lock_length(args->fl)); @@ -966,9 +966,9 @@ static inline void encode_claim_delegate_cur(struct xdr_stream *xdr, const struc { __be32 *p; - RESERVE_SPACE(4+sizeof(stateid->data)); + RESERVE_SPACE(4+NFS4_STATEID_SIZE); WRITE32(NFS4_OPEN_CLAIM_DELEGATE_CUR); - WRITEMEM(stateid->data, sizeof(stateid->data)); + WRITEMEM(stateid->data, NFS4_STATEID_SIZE); encode_string(xdr, name->len, name->name); } @@ -996,9 +996,9 @@ static int encode_open_confirm(struct xdr_stream *xdr, const struct nfs_open_con { __be32 *p; - RESERVE_SPACE(8+sizeof(arg->stateid->data)); + RESERVE_SPACE(4+NFS4_STATEID_SIZE+4); WRITE32(OP_OPEN_CONFIRM); - WRITEMEM(arg->stateid->data, sizeof(arg->stateid->data)); + WRITEMEM(arg->stateid->data, NFS4_STATEID_SIZE); WRITE32(arg->seqid->sequence->counter); return 0; @@ -1008,9 +1008,9 @@ static int encode_open_downgrade(struct xdr_stream *xdr, const struct nfs_closea { __be32 *p; - RESERVE_SPACE(8+sizeof(arg->stateid->data)); + RESERVE_SPACE(4+NFS4_STATEID_SIZE+4); WRITE32(OP_OPEN_DOWNGRADE); - WRITEMEM(arg->stateid->data, sizeof(arg->stateid->data)); + WRITEMEM(arg->stateid->data, NFS4_STATEID_SIZE); WRITE32(arg->seqid->sequence->counter); encode_share_access(xdr, arg->open_flags); return 0; @@ -1045,12 +1045,12 @@ static void encode_stateid(struct xdr_stream *xdr, const struct nfs_open_context nfs4_stateid stateid; __be32 *p; - RESERVE_SPACE(16); + RESERVE_SPACE(NFS4_STATEID_SIZE); if (ctx->state != NULL) { nfs4_copy_stateid(&stateid, ctx->state, ctx->lockowner); - WRITEMEM(stateid.data, sizeof(stateid.data)); + WRITEMEM(stateid.data, NFS4_STATEID_SIZE); } else - WRITEMEM(zero_stateid.data, sizeof(zero_stateid.data)); + WRITEMEM(zero_stateid.data, NFS4_STATEID_SIZE); } static int encode_read(struct xdr_stream *xdr, const struct nfs_readargs *args) @@ -1079,10 +1079,10 @@ static int encode_readdir(struct xdr_stream *xdr, const struct nfs4_readdir_arg int replen; __be32 *p; - RESERVE_SPACE(32+sizeof(nfs4_verifier)); + RESERVE_SPACE(12+NFS4_VERIFIER_SIZE+20); WRITE32(OP_READDIR); WRITE64(readdir->cookie); - WRITEMEM(readdir->verifier.data, sizeof(readdir->verifier.data)); + WRITEMEM(readdir->verifier.data, NFS4_VERIFIER_SIZE); WRITE32(readdir->count >> 1); /* We're not doing readdirplus */ WRITE32(readdir->count); WRITE32(2); @@ -1190,9 +1190,9 @@ encode_setacl(struct xdr_stream *xdr, struct nfs_setaclargs *arg) { __be32 *p; - RESERVE_SPACE(4+sizeof(zero_stateid.data)); + RESERVE_SPACE(4+NFS4_STATEID_SIZE); WRITE32(OP_SETATTR); - WRITEMEM(zero_stateid.data, sizeof(zero_stateid.data)); + WRITEMEM(zero_stateid.data, NFS4_STATEID_SIZE); RESERVE_SPACE(2*4); WRITE32(1); WRITE32(FATTR4_WORD0_ACL); @@ -1220,9 +1220,9 @@ static int encode_setattr(struct xdr_stream *xdr, const struct nfs_setattrargs * int status; __be32 *p; - RESERVE_SPACE(4+sizeof(arg->stateid.data)); + RESERVE_SPACE(4+NFS4_STATEID_SIZE); WRITE32(OP_SETATTR); - WRITEMEM(arg->stateid.data, sizeof(arg->stateid.data)); + WRITEMEM(arg->stateid.data, NFS4_STATEID_SIZE); if ((status = encode_attrs(xdr, arg->iap, server))) return status; @@ -1234,9 +1234,9 @@ static int encode_setclientid(struct xdr_stream *xdr, const struct nfs4_setclien { __be32 *p; - RESERVE_SPACE(4 + sizeof(setclientid->sc_verifier->data)); + RESERVE_SPACE(4 + NFS4_VERIFIER_SIZE); WRITE32(OP_SETCLIENTID); - WRITEMEM(setclientid->sc_verifier->data, sizeof(setclientid->sc_verifier->data)); + WRITEMEM(setclientid->sc_verifier->data, NFS4_VERIFIER_SIZE); encode_string(xdr, setclientid->sc_name_len, setclientid->sc_name); RESERVE_SPACE(4); @@ -1253,10 +1253,10 @@ static int encode_setclientid_confirm(struct xdr_stream *xdr, const struct nfs_c { __be32 *p; - RESERVE_SPACE(12 + sizeof(client_state->cl_confirm.data)); + RESERVE_SPACE(12 + NFS4_VERIFIER_SIZE); WRITE32(OP_SETCLIENTID_CONFIRM); WRITE64(client_state->cl_clientid); - WRITEMEM(client_state->cl_confirm.data, sizeof(client_state->cl_confirm.data)); + WRITEMEM(client_state->cl_confirm.data, NFS4_VERIFIER_SIZE); return 0; } @@ -1284,10 +1284,10 @@ static int encode_delegreturn(struct xdr_stream *xdr, const nfs4_stateid *statei { __be32 *p; - RESERVE_SPACE(20); + RESERVE_SPACE(4+NFS4_STATEID_SIZE); WRITE32(OP_DELEGRETURN); - WRITEMEM(stateid->data, sizeof(stateid->data)); + WRITEMEM(stateid->data, NFS4_STATEID_SIZE); return 0; } @@ -2494,7 +2494,7 @@ static int decode_attr_fs_locations(struct xdr_stream *xdr, uint32_t *bitmap, st int i; dprintk("%s: using first %d of %d servers returned for location %d\n", __FUNCTION__, NFS4_FS_LOCATION_MAXSERVERS, m, res->nlocations); for (i = loc->nservers; i < m; i++) { - int len; + unsigned int len; char *data; status = decode_opaque_inline(xdr, &len, &data); if (unlikely(status != 0)) @@ -2642,7 +2642,7 @@ static int decode_attr_nlink(struct xdr_stream *xdr, uint32_t *bitmap, uint32_t return 0; } -static int decode_attr_owner(struct xdr_stream *xdr, uint32_t *bitmap, struct nfs_client *clp, int32_t *uid) +static int decode_attr_owner(struct xdr_stream *xdr, uint32_t *bitmap, struct nfs_client *clp, uint32_t *uid) { uint32_t len; __be32 *p; @@ -2667,7 +2667,7 @@ static int decode_attr_owner(struct xdr_stream *xdr, uint32_t *bitmap, struct nf return 0; } -static int decode_attr_group(struct xdr_stream *xdr, uint32_t *bitmap, struct nfs_client *clp, int32_t *gid) +static int decode_attr_group(struct xdr_stream *xdr, uint32_t *bitmap, struct nfs_client *clp, uint32_t *gid) { uint32_t len; __be32 *p; @@ -2897,8 +2897,8 @@ static int decode_close(struct xdr_stream *xdr, struct nfs_closeres *res) status = decode_op_hdr(xdr, OP_CLOSE); if (status) return status; - READ_BUF(sizeof(res->stateid.data)); - COPYMEM(res->stateid.data, sizeof(res->stateid.data)); + READ_BUF(NFS4_STATEID_SIZE); + COPYMEM(res->stateid.data, NFS4_STATEID_SIZE); return 0; } @@ -3186,8 +3186,8 @@ static int decode_lock(struct xdr_stream *xdr, struct nfs_lock_res *res) status = decode_op_hdr(xdr, OP_LOCK); if (status == 0) { - READ_BUF(sizeof(res->stateid.data)); - COPYMEM(res->stateid.data, sizeof(res->stateid.data)); + READ_BUF(NFS4_STATEID_SIZE); + COPYMEM(res->stateid.data, NFS4_STATEID_SIZE); } else if (status == -NFS4ERR_DENIED) return decode_lock_denied(xdr, NULL); return status; @@ -3209,8 +3209,8 @@ static int decode_locku(struct xdr_stream *xdr, struct nfs_locku_res *res) status = decode_op_hdr(xdr, OP_LOCKU); if (status == 0) { - READ_BUF(sizeof(res->stateid.data)); - COPYMEM(res->stateid.data, sizeof(res->stateid.data)); + READ_BUF(NFS4_STATEID_SIZE); + COPYMEM(res->stateid.data, NFS4_STATEID_SIZE); } return status; } @@ -3251,8 +3251,8 @@ static int decode_delegation(struct xdr_stream *xdr, struct nfs_openres *res) res->delegation_type = 0; return 0; } - READ_BUF(20); - COPYMEM(res->delegation.data, sizeof(res->delegation.data)); + READ_BUF(NFS4_STATEID_SIZE+4); + COPYMEM(res->delegation.data, NFS4_STATEID_SIZE); READ32(res->do_recall); switch (delegation_type) { case NFS4_OPEN_DELEGATE_READ: @@ -3275,8 +3275,8 @@ static int decode_open(struct xdr_stream *xdr, struct nfs_openres *res) status = decode_op_hdr(xdr, OP_OPEN); if (status) return status; - READ_BUF(sizeof(res->stateid.data)); - COPYMEM(res->stateid.data, sizeof(res->stateid.data)); + READ_BUF(NFS4_STATEID_SIZE); + COPYMEM(res->stateid.data, NFS4_STATEID_SIZE); decode_change_info(xdr, &res->cinfo); @@ -3302,8 +3302,8 @@ static int decode_open_confirm(struct xdr_stream *xdr, struct nfs_open_confirmre status = decode_op_hdr(xdr, OP_OPEN_CONFIRM); if (status) return status; - READ_BUF(sizeof(res->stateid.data)); - COPYMEM(res->stateid.data, sizeof(res->stateid.data)); + READ_BUF(NFS4_STATEID_SIZE); + COPYMEM(res->stateid.data, NFS4_STATEID_SIZE); return 0; } @@ -3315,8 +3315,8 @@ static int decode_open_downgrade(struct xdr_stream *xdr, struct nfs_closeres *re status = decode_op_hdr(xdr, OP_OPEN_DOWNGRADE); if (status) return status; - READ_BUF(sizeof(res->stateid.data)); - COPYMEM(res->stateid.data, sizeof(res->stateid.data)); + READ_BUF(NFS4_STATEID_SIZE); + COPYMEM(res->stateid.data, NFS4_STATEID_SIZE); return 0; } @@ -3590,9 +3590,9 @@ static int decode_setclientid(struct xdr_stream *xdr, struct nfs_client *clp) } READ32(nfserr); if (nfserr == NFS_OK) { - READ_BUF(8 + sizeof(clp->cl_confirm.data)); + READ_BUF(8 + NFS4_VERIFIER_SIZE); READ64(clp->cl_clientid); - COPYMEM(clp->cl_confirm.data, sizeof(clp->cl_confirm.data)); + COPYMEM(clp->cl_confirm.data, NFS4_VERIFIER_SIZE); } else if (nfserr == NFSERR_CLID_INUSE) { uint32_t len; diff --git a/fs/nfs/pagelist.c b/fs/nfs/pagelist.c index e12054c86d0dd3..c5bb51a29e8072 100644 --- a/fs/nfs/pagelist.c +++ b/fs/nfs/pagelist.c @@ -11,6 +11,7 @@ #include <linux/slab.h> #include <linux/file.h> +#include <linux/sched.h> #include <linux/sunrpc/clnt.h> #include <linux/nfs3.h> #include <linux/nfs4.h> @@ -354,6 +355,26 @@ void nfs_pageio_complete(struct nfs_pageio_descriptor *desc) nfs_pageio_doio(desc); } +/** + * nfs_pageio_cond_complete - Conditional I/O completion + * @desc: pointer to io descriptor + * @index: page index + * + * It is important to ensure that processes don't try to take locks + * on non-contiguous ranges of pages as that might deadlock. This + * function should be called before attempting to wait on a locked + * nfs_page. It will complete the I/O if the page index 'index' + * is not contiguous with the existing list of pages in 'desc'. + */ +void nfs_pageio_cond_complete(struct nfs_pageio_descriptor *desc, pgoff_t index) +{ + if (!list_empty(&desc->pg_list)) { + struct nfs_page *prev = nfs_list_entry(desc->pg_list.prev); + if (index != prev->wb_index + 1) + nfs_pageio_doio(desc); + } +} + #define NFS_SCAN_MAXENTRIES 16 /** * nfs_scan_list - Scan a list for matching requests diff --git a/fs/nfs/read.c b/fs/nfs/read.c index 9a55807b2a701f..7bd7cb95c034d8 100644 --- a/fs/nfs/read.c +++ b/fs/nfs/read.c @@ -79,7 +79,7 @@ void nfs_readdata_release(void *data) static int nfs_return_empty_page(struct page *page) { - memclear_highpage_flush(page, 0, PAGE_CACHE_SIZE); + zero_user_page(page, 0, PAGE_CACHE_SIZE, KM_USER0); SetPageUptodate(page); unlock_page(page); return 0; @@ -103,10 +103,10 @@ static void nfs_readpage_truncate_uninitialised_page(struct nfs_read_data *data) pglen = PAGE_CACHE_SIZE - base; for (;;) { if (remainder <= pglen) { - memclear_highpage_flush(*pages, base, remainder); + zero_user_page(*pages, base, remainder, KM_USER0); break; } - memclear_highpage_flush(*pages, base, pglen); + zero_user_page(*pages, base, pglen, KM_USER0); pages++; remainder -= pglen; pglen = PAGE_CACHE_SIZE; @@ -130,7 +130,7 @@ static int nfs_readpage_async(struct nfs_open_context *ctx, struct inode *inode, return PTR_ERR(new); } if (len < PAGE_CACHE_SIZE) - memclear_highpage_flush(page, len, PAGE_CACHE_SIZE - len); + zero_user_page(page, len, PAGE_CACHE_SIZE - len, KM_USER0); nfs_list_add_request(new, &one_request); if (NFS_SERVER(inode)->rsize < PAGE_CACHE_SIZE) @@ -532,7 +532,7 @@ readpage_async_filler(void *data, struct page *page) return PTR_ERR(new); } if (len < PAGE_CACHE_SIZE) - memclear_highpage_flush(page, len, PAGE_CACHE_SIZE - len); + zero_user_page(page, len, PAGE_CACHE_SIZE - len, KM_USER0); nfs_pageio_add_request(desc->pgio, new); return 0; } diff --git a/fs/nfs/write.c b/fs/nfs/write.c index de92b9509d948f..af344a158e0103 100644 --- a/fs/nfs/write.c +++ b/fs/nfs/write.c @@ -58,7 +58,7 @@ struct nfs_write_data *nfs_commit_alloc(void) return p; } -void nfs_commit_rcu_free(struct rcu_head *head) +static void nfs_commit_rcu_free(struct rcu_head *head) { struct nfs_write_data *p = container_of(head, struct nfs_write_data, task.u.tk_rcu); if (p && (p->pagevec != &p->page_array[0])) @@ -168,7 +168,7 @@ static void nfs_mark_uptodate(struct page *page, unsigned int base, unsigned int if (count != nfs_page_length(page)) return; if (count != PAGE_CACHE_SIZE) - memclear_highpage_flush(page, count, PAGE_CACHE_SIZE - count); + zero_user_page(page, count, PAGE_CACHE_SIZE - count, KM_USER0); SetPageUptodate(page); } @@ -273,8 +273,6 @@ static int nfs_page_async_flush(struct nfs_pageio_descriptor *pgio, * request as dirty (in which case we don't care). */ spin_unlock(req_lock); - /* Prevent deadlock! */ - nfs_pageio_complete(pgio); ret = nfs_wait_on_request(req); nfs_release_request(req); if (ret != 0) @@ -321,6 +319,8 @@ static int nfs_writepage_locked(struct page *page, struct writeback_control *wbc pgio = &mypgio; } + nfs_pageio_cond_complete(pgio, page->index); + err = nfs_page_async_flush(pgio, page); if (err <= 0) goto out; @@ -329,6 +329,8 @@ static int nfs_writepage_locked(struct page *page, struct writeback_control *wbc if (!offset) goto out; + nfs_pageio_cond_complete(pgio, page->index); + ctx = nfs_find_open_context(inode, NULL, FMODE_WRITE); if (ctx == NULL) { err = -EBADF; @@ -922,7 +924,7 @@ static int nfs_flush_one(struct inode *inode, struct list_head *head, unsigned i return 0; out_bad: while (!list_empty(head)) { - struct nfs_page *req = nfs_list_entry(head->next); + req = nfs_list_entry(head->next); nfs_list_remove_request(req); nfs_redirty_request(req); nfs_end_page_writeback(req->wb_page); diff --git a/fs/nfsd/nfs4callback.c b/fs/nfsd/nfs4callback.c index 32ffea033c7a9c..864090edc28b2f 100644 --- a/fs/nfsd/nfs4callback.c +++ b/fs/nfsd/nfs4callback.c @@ -38,6 +38,7 @@ #include <linux/inet.h> #include <linux/errno.h> #include <linux/delay.h> +#include <linux/sched.h> #include <linux/sunrpc/xdr.h> #include <linux/sunrpc/svc.h> #include <linux/sunrpc/clnt.h> diff --git a/fs/nfsd/nfs4recover.c b/fs/nfsd/nfs4recover.c index c7774e3a9469fc..ebd03cc07479e7 100644 --- a/fs/nfsd/nfs4recover.c +++ b/fs/nfsd/nfs4recover.c @@ -45,7 +45,7 @@ #include <asm/uaccess.h> #include <asm/scatterlist.h> #include <linux/crypto.h> - +#include <linux/sched.h> #define NFSDDBG_FACILITY NFSDDBG_PROC diff --git a/fs/nfsd/nfssvc.c b/fs/nfsd/nfssvc.c index d7759ce6ed94a6..ff55950efb4374 100644 --- a/fs/nfsd/nfssvc.c +++ b/fs/nfsd/nfssvc.c @@ -9,7 +9,7 @@ */ #include <linux/module.h> - +#include <linux/sched.h> #include <linux/time.h> #include <linux/errno.h> #include <linux/nfs.h> diff --git a/fs/ntfs/file.c b/fs/ntfs/file.c index 39a1669506bd5e..7ed56390b58267 100644 --- a/fs/ntfs/file.c +++ b/fs/ntfs/file.c @@ -26,6 +26,7 @@ #include <linux/swap.h> #include <linux/uio.h> #include <linux/writeback.h> +#include <linux/sched.h> #include <asm/page.h> #include <asm/uaccess.h> diff --git a/fs/ntfs/super.c b/fs/ntfs/super.c index 21d834e5ed7333..4566b9182551cd 100644 --- a/fs/ntfs/super.c +++ b/fs/ntfs/super.c @@ -3085,8 +3085,7 @@ static void ntfs_big_inode_init_once(void *foo, struct kmem_cache *cachep, { ntfs_inode *ni = (ntfs_inode *)foo; - if (flags & SLAB_CTOR_CONSTRUCTOR) - inode_init_once(VFS_I(ni)); + inode_init_once(VFS_I(ni)); } /* diff --git a/fs/ocfs2/aops.c b/fs/ocfs2/aops.c index 8e7cafb5fc6c63..0023b31e48a896 100644 --- a/fs/ocfs2/aops.c +++ b/fs/ocfs2/aops.c @@ -222,7 +222,10 @@ static int ocfs2_readpage(struct file *file, struct page *page) goto out; } - down_read(&OCFS2_I(inode)->ip_alloc_sem); + if (down_read_trylock(&OCFS2_I(inode)->ip_alloc_sem) == 0) { + ret = AOP_TRUNCATED_PAGE; + goto out_meta_unlock; + } /* * i_size might have just been updated as we grabed the meta lock. We @@ -235,10 +238,7 @@ static int ocfs2_readpage(struct file *file, struct page *page) * XXX sys_readahead() seems to get that wrong? */ if (start >= i_size_read(inode)) { - char *addr = kmap(page); - memset(addr, 0, PAGE_SIZE); - flush_dcache_page(page); - kunmap(page); + zero_user_page(page, 0, PAGE_SIZE, KM_USER0); SetPageUptodate(page); ret = 0; goto out_alloc; @@ -258,6 +258,7 @@ static int ocfs2_readpage(struct file *file, struct page *page) ocfs2_data_unlock(inode, 0); out_alloc: up_read(&OCFS2_I(inode)->ip_alloc_sem); +out_meta_unlock: ocfs2_meta_unlock(inode, 0); out: if (unlock) diff --git a/fs/ocfs2/dlm/dlmfs.c b/fs/ocfs2/dlm/dlmfs.c index 5671cf9d638352..fd8cb1badc9b9d 100644 --- a/fs/ocfs2/dlm/dlmfs.c +++ b/fs/ocfs2/dlm/dlmfs.c @@ -262,12 +262,10 @@ static void dlmfs_init_once(void *foo, struct dlmfs_inode_private *ip = (struct dlmfs_inode_private *) foo; - if (flags & SLAB_CTOR_CONSTRUCTOR) { - ip->ip_dlm = NULL; - ip->ip_parent = NULL; + ip->ip_dlm = NULL; + ip->ip_parent = NULL; - inode_init_once(&ip->ip_vfs_inode); - } + inode_init_once(&ip->ip_vfs_inode); } static struct inode *dlmfs_alloc_inode(struct super_block *sb) diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c index 9395b4fa547df5..ac6c96431bbcb3 100644 --- a/fs/ocfs2/file.c +++ b/fs/ocfs2/file.c @@ -326,6 +326,7 @@ static int ocfs2_truncate_file(struct inode *inode, (unsigned long long)OCFS2_I(inode)->ip_blkno, (unsigned long long)new_i_size); + unmap_mapping_range(inode->i_mapping, new_i_size + PAGE_SIZE - 1, 0, 1); truncate_inode_pages(inode->i_mapping, new_i_size); fe = (struct ocfs2_dinode *) di_bh->b_data; @@ -1418,36 +1419,6 @@ out: return total ? total : ret; } -static int ocfs2_check_iovec(const struct iovec *iov, size_t *counted, - unsigned long *nr_segs) -{ - size_t ocount; /* original count */ - unsigned long seg; - - ocount = 0; - for (seg = 0; seg < *nr_segs; seg++) { - const struct iovec *iv = &iov[seg]; - - /* - * If any segment has a negative length, or the cumulative - * length ever wraps negative then return -EINVAL. - */ - ocount += iv->iov_len; - if (unlikely((ssize_t)(ocount|iv->iov_len) < 0)) - return -EINVAL; - if (access_ok(VERIFY_READ, iv->iov_base, iv->iov_len)) - continue; - if (seg == 0) - return -EFAULT; - *nr_segs = seg; - ocount -= iv->iov_len; /* This segment is no good */ - break; - } - - *counted = ocount; - return 0; -} - static ssize_t ocfs2_file_aio_write(struct kiocb *iocb, const struct iovec *iov, unsigned long nr_segs, @@ -1470,7 +1441,7 @@ static ssize_t ocfs2_file_aio_write(struct kiocb *iocb, if (iocb->ki_left == 0) return 0; - ret = ocfs2_check_iovec(iov, &ocount, &nr_segs); + ret = generic_segment_checks(iov, &nr_segs, &ocount, VERIFY_READ); if (ret) return ret; diff --git a/fs/ocfs2/localalloc.c b/fs/ocfs2/localalloc.c index 4dedd978910819..545f7892cdf39b 100644 --- a/fs/ocfs2/localalloc.c +++ b/fs/ocfs2/localalloc.c @@ -471,9 +471,6 @@ int ocfs2_reserve_local_alloc_bits(struct ocfs2_super *osb, mutex_lock(&local_alloc_inode->i_mutex); - ac->ac_inode = local_alloc_inode; - ac->ac_which = OCFS2_AC_USE_LOCAL; - if (osb->local_alloc_state != OCFS2_LA_ENABLED) { status = -ENOSPC; goto bail; @@ -511,10 +508,14 @@ int ocfs2_reserve_local_alloc_bits(struct ocfs2_super *osb, } } + ac->ac_inode = local_alloc_inode; + ac->ac_which = OCFS2_AC_USE_LOCAL; get_bh(osb->local_alloc_bh); ac->ac_bh = osb->local_alloc_bh; status = 0; bail: + if (status < 0 && local_alloc_inode) + iput(local_alloc_inode); mlog_exit(status); return status; diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c index 7c5e3f5d66345e..86b559c7dce9a0 100644 --- a/fs/ocfs2/super.c +++ b/fs/ocfs2/super.c @@ -937,31 +937,29 @@ static void ocfs2_inode_init_once(void *data, { struct ocfs2_inode_info *oi = data; - if (flags & SLAB_CTOR_CONSTRUCTOR) { - oi->ip_flags = 0; - oi->ip_open_count = 0; - spin_lock_init(&oi->ip_lock); - ocfs2_extent_map_init(&oi->vfs_inode); - INIT_LIST_HEAD(&oi->ip_io_markers); - oi->ip_created_trans = 0; - oi->ip_last_trans = 0; - oi->ip_dir_start_lookup = 0; + oi->ip_flags = 0; + oi->ip_open_count = 0; + spin_lock_init(&oi->ip_lock); + ocfs2_extent_map_init(&oi->vfs_inode); + INIT_LIST_HEAD(&oi->ip_io_markers); + oi->ip_created_trans = 0; + oi->ip_last_trans = 0; + oi->ip_dir_start_lookup = 0; - init_rwsem(&oi->ip_alloc_sem); - mutex_init(&oi->ip_io_mutex); + init_rwsem(&oi->ip_alloc_sem); + mutex_init(&oi->ip_io_mutex); - oi->ip_blkno = 0ULL; - oi->ip_clusters = 0; + oi->ip_blkno = 0ULL; + oi->ip_clusters = 0; - ocfs2_lock_res_init_once(&oi->ip_rw_lockres); - ocfs2_lock_res_init_once(&oi->ip_meta_lockres); - ocfs2_lock_res_init_once(&oi->ip_data_lockres); - ocfs2_lock_res_init_once(&oi->ip_open_lockres); + ocfs2_lock_res_init_once(&oi->ip_rw_lockres); + ocfs2_lock_res_init_once(&oi->ip_meta_lockres); + ocfs2_lock_res_init_once(&oi->ip_data_lockres); + ocfs2_lock_res_init_once(&oi->ip_open_lockres); - ocfs2_metadata_cache_init(&oi->vfs_inode); + ocfs2_metadata_cache_init(&oi->vfs_inode); - inode_init_once(&oi->vfs_inode); - } + inode_init_once(&oi->vfs_inode); } static int ocfs2_initialize_mem_caches(void) diff --git a/fs/openpromfs/inode.c b/fs/openpromfs/inode.c index 731a90e9f0cd1b..e62397341c363f 100644 --- a/fs/openpromfs/inode.c +++ b/fs/openpromfs/inode.c @@ -419,8 +419,7 @@ static void op_inode_init_once(void *data, struct kmem_cache * cachep, unsigned { struct op_inode_info *oi = (struct op_inode_info *) data; - if (flags & SLAB_CTOR_CONSTRUCTOR) - inode_init_once(&oi->vfs_inode); + inode_init_once(&oi->vfs_inode); } static int __init init_openprom_fs(void) diff --git a/fs/partitions/Kconfig b/fs/partitions/Kconfig index 7638a1c42a7dfa..a99acd8de3539e 100644 --- a/fs/partitions/Kconfig +++ b/fs/partitions/Kconfig @@ -166,8 +166,12 @@ config LDM_PARTITION depends on PARTITION_ADVANCED ---help--- Say Y here if you would like to use hard disks under Linux which - were partitioned using Windows 2000's or XP's Logical Disk Manager. - They are also known as "Dynamic Disks". + were partitioned using Windows 2000's/XP's or Vista's Logical Disk + Manager. They are also known as "Dynamic Disks". + + Note this driver only supports Dynamic Disks with a protective MBR + label, i.e. DOS partition table. It does not support GPT labelled + Dynamic Disks yet as can be created with Vista. Windows 2000 introduced the concept of Dynamic Disks to get around the limitations of the PC's partitioning scheme. The Logical Disk @@ -175,8 +179,8 @@ config LDM_PARTITION mirrored, striped or RAID volumes, all without the need for rebooting. - Normal partitions are now called Basic Disks under Windows 2000 and - XP. + Normal partitions are now called Basic Disks under Windows 2000, XP, + and Vista. For a fuller description read <file:Documentation/ldm.txt>. diff --git a/fs/partitions/ldm.c b/fs/partitions/ldm.c index 1a60926a4ccd59..99873a2b4cbcd7 100644 --- a/fs/partitions/ldm.c +++ b/fs/partitions/ldm.c @@ -2,10 +2,10 @@ * ldm - Support for Windows Logical Disk Manager (Dynamic Disks) * * Copyright (C) 2001,2002 Richard Russon <ldm@flatcap.org> - * Copyright (c) 2001-2004 Anton Altaparmakov + * Copyright (c) 2001-2007 Anton Altaparmakov * Copyright (C) 2001,2002 Jakob Kemi <jakob.kemi@telia.com> * - * Documentation is available at http://linux-ntfs.sf.net/ldm + * Documentation is available at http://www.linux-ntfs.org/content/view/19/37/ * * This program is free software; you can redistribute it and/or modify it under * the terms of the GNU General Public License as published by the Free Software @@ -62,7 +62,6 @@ static void _ldm_printk (const char *level, const char *function, printk ("%s%s(): %s\n", level, function, buf); } - /** * ldm_parse_hexbyte - Convert a ASCII hex number to a byte * @src: Pointer to at least 2 characters to convert. @@ -118,7 +117,6 @@ static bool ldm_parse_guid (const u8 *src, u8 *dest) return true; } - /** * ldm_parse_privhead - Read the LDM Database PRIVHEAD structure * @data: Raw database PRIVHEAD structure loaded from the device @@ -130,46 +128,48 @@ static bool ldm_parse_guid (const u8 *src, u8 *dest) * Return: 'true' @ph contains the PRIVHEAD data * 'false' @ph contents are undefined */ -static bool ldm_parse_privhead (const u8 *data, struct privhead *ph) +static bool ldm_parse_privhead(const u8 *data, struct privhead *ph) { - BUG_ON (!data || !ph); + bool is_vista = false; - if (MAGIC_PRIVHEAD != BE64 (data)) { - ldm_error ("Cannot find PRIVHEAD structure. LDM database is" + BUG_ON(!data || !ph); + if (MAGIC_PRIVHEAD != BE64(data)) { + ldm_error("Cannot find PRIVHEAD structure. LDM database is" " corrupt. Aborting."); return false; } - - ph->ver_major = BE16 (data + 0x000C); - ph->ver_minor = BE16 (data + 0x000E); - ph->logical_disk_start = BE64 (data + 0x011B); - ph->logical_disk_size = BE64 (data + 0x0123); - ph->config_start = BE64 (data + 0x012B); - ph->config_size = BE64 (data + 0x0133); - - if ((ph->ver_major != 2) || (ph->ver_minor != 11)) { - ldm_error ("Expected PRIVHEAD version %d.%d, got %d.%d." - " Aborting.", 2, 11, ph->ver_major, ph->ver_minor); + ph->ver_major = BE16(data + 0x000C); + ph->ver_minor = BE16(data + 0x000E); + ph->logical_disk_start = BE64(data + 0x011B); + ph->logical_disk_size = BE64(data + 0x0123); + ph->config_start = BE64(data + 0x012B); + ph->config_size = BE64(data + 0x0133); + /* Version 2.11 is Win2k/XP and version 2.12 is Vista. */ + if (ph->ver_major == 2 && ph->ver_minor == 12) + is_vista = true; + if (!is_vista && (ph->ver_major != 2 || ph->ver_minor != 11)) { + ldm_error("Expected PRIVHEAD version 2.11 or 2.12, got %d.%d." + " Aborting.", ph->ver_major, ph->ver_minor); return false; } + ldm_debug("PRIVHEAD version %d.%d (Windows %s).", ph->ver_major, + ph->ver_minor, is_vista ? "Vista" : "2000/XP"); if (ph->config_size != LDM_DB_SIZE) { /* 1 MiB in sectors. */ - /* Warn the user and continue, carefully */ - ldm_info ("Database is normally %u bytes, it claims to " + /* Warn the user and continue, carefully. */ + ldm_info("Database is normally %u bytes, it claims to " "be %llu bytes.", LDM_DB_SIZE, - (unsigned long long)ph->config_size ); + (unsigned long long)ph->config_size); } - if ((ph->logical_disk_size == 0) || - (ph->logical_disk_start + ph->logical_disk_size > ph->config_start)) { - ldm_error ("PRIVHEAD disk size doesn't match real disk size"); + if ((ph->logical_disk_size == 0) || (ph->logical_disk_start + + ph->logical_disk_size > ph->config_start)) { + ldm_error("PRIVHEAD disk size doesn't match real disk size"); return false; } - - if (!ldm_parse_guid (data + 0x0030, ph->disk_id)) { - ldm_error ("PRIVHEAD contains an invalid GUID."); + if (!ldm_parse_guid(data + 0x0030, ph->disk_id)) { + ldm_error("PRIVHEAD contains an invalid GUID."); return false; } - - ldm_debug ("Parsed PRIVHEAD successfully."); + ldm_debug("Parsed PRIVHEAD successfully."); return true; } @@ -409,7 +409,7 @@ out: * Return: 'true' @toc1 contains validated TOCBLOCK info * 'false' @toc1 contents are undefined */ -static bool ldm_validate_tocblocks (struct block_device *bdev, +static bool ldm_validate_tocblocks(struct block_device *bdev, unsigned long base, struct ldmdb *ldb) { static const int off[4] = { OFF_TOCB1, OFF_TOCB2, OFF_TOCB3, OFF_TOCB4}; @@ -417,54 +417,57 @@ static bool ldm_validate_tocblocks (struct block_device *bdev, struct privhead *ph; Sector sect; u8 *data; + int i, nr_tbs; bool result = false; - int i; - BUG_ON (!bdev || !ldb); - - ph = &ldb->ph; + BUG_ON(!bdev || !ldb); + ph = &ldb->ph; tb[0] = &ldb->toc; - tb[1] = kmalloc (sizeof (*tb[1]), GFP_KERNEL); - tb[2] = kmalloc (sizeof (*tb[2]), GFP_KERNEL); - tb[3] = kmalloc (sizeof (*tb[3]), GFP_KERNEL); - if (!tb[1] || !tb[2] || !tb[3]) { - ldm_crit ("Out of memory."); - goto out; + tb[1] = kmalloc(sizeof(*tb[1]) * 3, GFP_KERNEL); + if (!tb[1]) { + ldm_crit("Out of memory."); + goto err; } - - for (i = 0; i < 4; i++) /* Read and parse all four toc's. */ - { - data = read_dev_sector (bdev, base + off[i], §); + tb[2] = (struct tocblock*)((u8*)tb[1] + sizeof(*tb[1])); + tb[3] = (struct tocblock*)((u8*)tb[2] + sizeof(*tb[2])); + /* + * Try to read and parse all four TOCBLOCKs. + * + * Windows Vista LDM v2.12 does not always have all four TOCBLOCKs so + * skip any that fail as long as we get at least one valid TOCBLOCK. + */ + for (nr_tbs = i = 0; i < 4; i++) { + data = read_dev_sector(bdev, base + off[i], §); if (!data) { - ldm_crit ("Disk read failed."); - goto out; + ldm_error("Disk read failed for TOCBLOCK %d.", i); + continue; } - result = ldm_parse_tocblock (data, tb[i]); - put_dev_sector (sect); - if (!result) - goto out; /* Already logged */ + if (ldm_parse_tocblock(data, tb[nr_tbs])) + nr_tbs++; + put_dev_sector(sect); } - - /* Range check the toc against a privhead. */ + if (!nr_tbs) { + ldm_crit("Failed to find a valid TOCBLOCK."); + goto err; + } + /* Range check the TOCBLOCK against a privhead. */ if (((tb[0]->bitmap1_start + tb[0]->bitmap1_size) > ph->config_size) || - ((tb[0]->bitmap2_start + tb[0]->bitmap2_size) > ph->config_size)) { - ldm_crit ("The bitmaps are out of range. Giving up."); - goto out; + ((tb[0]->bitmap2_start + tb[0]->bitmap2_size) > + ph->config_size)) { + ldm_crit("The bitmaps are out of range. Giving up."); + goto err; } - - if (!ldm_compare_tocblocks (tb[0], tb[1]) || /* Compare all tocs. */ - !ldm_compare_tocblocks (tb[0], tb[2]) || - !ldm_compare_tocblocks (tb[0], tb[3])) { - ldm_crit ("The TOCBLOCKs don't match."); - goto out; + /* Compare all loaded TOCBLOCKs. */ + for (i = 1; i < nr_tbs; i++) { + if (!ldm_compare_tocblocks(tb[0], tb[i])) { + ldm_crit("TOCBLOCKs 0 and %d do not match.", i); + goto err; + } } - - ldm_debug ("Validated TOCBLOCKs successfully."); + ldm_debug("Validated %d TOCBLOCKs successfully.", nr_tbs); result = true; -out: - kfree (tb[1]); - kfree (tb[2]); - kfree (tb[3]); +err: + kfree(tb[1]); return result; } @@ -566,7 +569,7 @@ static bool ldm_validate_partition_table (struct block_device *bdev) p = (struct partition*)(data + 0x01BE); for (i = 0; i < 4; i++, p++) - if (SYS_IND (p) == WIN2K_DYNAMIC_PARTITION) { + if (SYS_IND (p) == LDM_PARTITION) { result = true; break; } @@ -975,44 +978,68 @@ static bool ldm_parse_dsk4 (const u8 *buffer, int buflen, struct vblk *vb) * Return: 'true' @vb contains a Partition VBLK * 'false' @vb contents are not defined */ -static bool ldm_parse_prt3 (const u8 *buffer, int buflen, struct vblk *vb) +static bool ldm_parse_prt3(const u8 *buffer, int buflen, struct vblk *vb) { int r_objid, r_name, r_size, r_parent, r_diskid, r_index, len; struct vblk_part *part; - BUG_ON (!buffer || !vb); - - r_objid = ldm_relative (buffer, buflen, 0x18, 0); - r_name = ldm_relative (buffer, buflen, 0x18, r_objid); - r_size = ldm_relative (buffer, buflen, 0x34, r_name); - r_parent = ldm_relative (buffer, buflen, 0x34, r_size); - r_diskid = ldm_relative (buffer, buflen, 0x34, r_parent); - + BUG_ON(!buffer || !vb); + r_objid = ldm_relative(buffer, buflen, 0x18, 0); + if (r_objid < 0) { + ldm_error("r_objid %d < 0", r_objid); + return false; + } + r_name = ldm_relative(buffer, buflen, 0x18, r_objid); + if (r_name < 0) { + ldm_error("r_name %d < 0", r_name); + return false; + } + r_size = ldm_relative(buffer, buflen, 0x34, r_name); + if (r_size < 0) { + ldm_error("r_size %d < 0", r_size); + return false; + } + r_parent = ldm_relative(buffer, buflen, 0x34, r_size); + if (r_parent < 0) { + ldm_error("r_parent %d < 0", r_parent); + return false; + } + r_diskid = ldm_relative(buffer, buflen, 0x34, r_parent); + if (r_diskid < 0) { + ldm_error("r_diskid %d < 0", r_diskid); + return false; + } if (buffer[0x12] & VBLK_FLAG_PART_INDEX) { - r_index = ldm_relative (buffer, buflen, 0x34, r_diskid); + r_index = ldm_relative(buffer, buflen, 0x34, r_diskid); + if (r_index < 0) { + ldm_error("r_index %d < 0", r_index); + return false; + } len = r_index; } else { r_index = 0; len = r_diskid; } - if (len < 0) + if (len < 0) { + ldm_error("len %d < 0", len); return false; - + } len += VBLK_SIZE_PRT3; - if (len != BE32 (buffer + 0x14)) + if (len > BE32(buffer + 0x14)) { + ldm_error("len %d > BE32(buffer + 0x14) %d", len, + BE32(buffer + 0x14)); return false; - + } part = &vb->vblk.part; - part->start = BE64 (buffer + 0x24 + r_name); - part->volume_offset = BE64 (buffer + 0x2C + r_name); - part->size = ldm_get_vnum (buffer + 0x34 + r_name); - part->parent_id = ldm_get_vnum (buffer + 0x34 + r_size); - part->disk_id = ldm_get_vnum (buffer + 0x34 + r_parent); + part->start = BE64(buffer + 0x24 + r_name); + part->volume_offset = BE64(buffer + 0x2C + r_name); + part->size = ldm_get_vnum(buffer + 0x34 + r_name); + part->parent_id = ldm_get_vnum(buffer + 0x34 + r_size); + part->disk_id = ldm_get_vnum(buffer + 0x34 + r_parent); if (vb->flags & VBLK_FLAG_PART_INDEX) part->partnum = buffer[0x35 + r_diskid]; else part->partnum = 0; - return true; } @@ -1475,4 +1502,3 @@ out: kfree (ldb); return result; } - diff --git a/fs/partitions/ldm.h b/fs/partitions/ldm.h index 6e8d7952b8b588..d2e6a3046939aa 100644 --- a/fs/partitions/ldm.h +++ b/fs/partitions/ldm.h @@ -2,10 +2,10 @@ * ldm - Part of the Linux-NTFS project. * * Copyright (C) 2001,2002 Richard Russon <ldm@flatcap.org> - * Copyright (C) 2001 Anton Altaparmakov <aia21@cantab.net> + * Copyright (c) 2001-2007 Anton Altaparmakov * Copyright (C) 2001,2002 Jakob Kemi <jakob.kemi@telia.com> * - * Documentation is available at http://linux-ntfs.sf.net/ldm + * Documentation is available at http://www.linux-ntfs.org/content/view/19/37/ * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the Free @@ -93,7 +93,7 @@ struct parsed_partitions; #define OFF_VMDB 17 /* List of partitions. */ -#define WIN2K_DYNAMIC_PARTITION 0x42 /* Formerly SFS (Landis). */ +#define LDM_PARTITION 0x42 /* Formerly SFS (Landis). */ #define TOC_BITMAP1 "config" /* Names of the two defined */ #define TOC_BITMAP2 "log" /* bitmaps in the TOCBLOCK. */ diff --git a/fs/proc/inode.c b/fs/proc/inode.c index b8171907c83b64..d5ce65c68d7b2b 100644 --- a/fs/proc/inode.c +++ b/fs/proc/inode.c @@ -109,8 +109,7 @@ static void init_once(void * foo, struct kmem_cache * cachep, unsigned long flag { struct proc_inode *ei = (struct proc_inode *) foo; - if (flags & SLAB_CTOR_CONSTRUCTOR) - inode_init_once(&ei->vfs_inode); + inode_init_once(&ei->vfs_inode); } int __init proc_init_inodecache(void) diff --git a/fs/qnx4/inode.c b/fs/qnx4/inode.c index 75fc8498f2e298..8d256eb1181301 100644 --- a/fs/qnx4/inode.c +++ b/fs/qnx4/inode.c @@ -536,8 +536,7 @@ static void init_once(void *foo, struct kmem_cache * cachep, { struct qnx4_inode_info *ei = (struct qnx4_inode_info *) foo; - if (flags & SLAB_CTOR_CONSTRUCTOR) - inode_init_once(&ei->vfs_inode); + inode_init_once(&ei->vfs_inode); } static int init_inodecache(void) diff --git a/fs/quota.c b/fs/quota.c index e9d88fd0eca8f4..9f237d6182c90e 100644 --- a/fs/quota.c +++ b/fs/quota.c @@ -157,7 +157,6 @@ static int check_quotactl_valid(struct super_block *sb, int type, int cmd, qid_t static void quota_sync_sb(struct super_block *sb, int type) { int cnt; - struct inode *discard[MAXQUOTAS]; sb->s_qcop->quota_sync(sb, type); /* This is not very clever (and fast) but currently I don't know about @@ -167,29 +166,21 @@ static void quota_sync_sb(struct super_block *sb, int type) sb->s_op->sync_fs(sb, 1); sync_blockdev(sb->s_bdev); - /* Now when everything is written we can discard the pagecache so - * that userspace sees the changes. We need i_mutex and so we could - * not do it inside dqonoff_mutex. Moreover we need to be carefull - * about races with quotaoff() (that is the reason why we have own - * reference to inode). */ + /* + * Now when everything is written we can discard the pagecache so + * that userspace sees the changes. + */ mutex_lock(&sb_dqopt(sb)->dqonoff_mutex); for (cnt = 0; cnt < MAXQUOTAS; cnt++) { - discard[cnt] = NULL; if (type != -1 && cnt != type) continue; if (!sb_has_quota_enabled(sb, cnt)) continue; - discard[cnt] = igrab(sb_dqopt(sb)->files[cnt]); + mutex_lock_nested(&sb_dqopt(sb)->files[cnt]->i_mutex, I_MUTEX_QUOTA); + truncate_inode_pages(&sb_dqopt(sb)->files[cnt]->i_data, 0); + mutex_unlock(&sb_dqopt(sb)->files[cnt]->i_mutex); } mutex_unlock(&sb_dqopt(sb)->dqonoff_mutex); - for (cnt = 0; cnt < MAXQUOTAS; cnt++) { - if (discard[cnt]) { - mutex_lock(&discard[cnt]->i_mutex); - truncate_inode_pages(&discard[cnt]->i_data, 0); - mutex_unlock(&discard[cnt]->i_mutex); - iput(discard[cnt]); - } - } } void sync_dquots(struct super_block *sb, int type) diff --git a/fs/ramfs/file-nommu.c b/fs/ramfs/file-nommu.c index 3b481d557edbd0..9345a46ffb325f 100644 --- a/fs/ramfs/file-nommu.c +++ b/fs/ramfs/file-nommu.c @@ -179,7 +179,7 @@ static int ramfs_nommu_resize(struct inode *inode, loff_t newsize, loff_t size) return ret; } - ret = vmtruncate(inode, size); + ret = vmtruncate(inode, newsize); return ret; } diff --git a/fs/ramfs/inode.c b/fs/ramfs/inode.c index 4ace5d72eae164..d40d22b347b767 100644 --- a/fs/ramfs/inode.c +++ b/fs/ramfs/inode.c @@ -32,7 +32,7 @@ #include <linux/string.h> #include <linux/backing-dev.h> #include <linux/ramfs.h> - +#include <linux/sched.h> #include <asm/uaccess.h> #include "internal.h" diff --git a/fs/reiserfs/dir.c b/fs/reiserfs/dir.c index 9c23fee3bae9b6..ffbfc2caaf2050 100644 --- a/fs/reiserfs/dir.c +++ b/fs/reiserfs/dir.c @@ -10,7 +10,7 @@ #include <linux/buffer_head.h> #include <asm/uaccess.h> -extern struct reiserfs_key MIN_KEY; +extern const struct reiserfs_key MIN_KEY; static int reiserfs_readdir(struct file *, void *, filldir_t); static int reiserfs_dir_fsync(struct file *filp, struct dentry *dentry, diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c index c7762140c4258a..b4ac9119200e6b 100644 --- a/fs/reiserfs/super.c +++ b/fs/reiserfs/super.c @@ -511,14 +511,12 @@ static void init_once(void *foo, struct kmem_cache * cachep, unsigned long flags { struct reiserfs_inode_info *ei = (struct reiserfs_inode_info *)foo; - if (flags & SLAB_CTOR_CONSTRUCTOR) { - INIT_LIST_HEAD(&ei->i_prealloc_list); - inode_init_once(&ei->vfs_inode); + INIT_LIST_HEAD(&ei->i_prealloc_list); + inode_init_once(&ei->vfs_inode); #ifdef CONFIG_REISERFS_FS_POSIX_ACL - ei->i_acl_access = NULL; - ei->i_acl_default = NULL; + ei->i_acl_access = NULL; + ei->i_acl_default = NULL; #endif - } } static int init_inodecache(void) diff --git a/fs/romfs/inode.c b/fs/romfs/inode.c index 80428519027182..2284e03342c6af 100644 --- a/fs/romfs/inode.c +++ b/fs/romfs/inode.c @@ -566,12 +566,11 @@ static void romfs_destroy_inode(struct inode *inode) kmem_cache_free(romfs_inode_cachep, ROMFS_I(inode)); } -static void init_once(void * foo, struct kmem_cache * cachep, unsigned long flags) +static void init_once(void *foo, struct kmem_cache *cachep, unsigned long flags) { - struct romfs_inode_info *ei = (struct romfs_inode_info *) foo; + struct romfs_inode_info *ei = foo; - if (flags & SLAB_CTOR_CONSTRUCTOR) - inode_init_once(&ei->vfs_inode); + inode_init_once(&ei->vfs_inode); } static int init_inodecache(void) diff --git a/fs/signalfd.c b/fs/signalfd.c index 7cfeab412b45ec..f1da89203a9aee 100644 --- a/fs/signalfd.c +++ b/fs/signalfd.c @@ -11,6 +11,8 @@ * Now using anonymous inode source. * Thanks to Oleg Nesterov for useful code review and suggestions. * More comments and suggestions from Arnd Bergmann. + * Sat May 19, 2007: Davi E. M. Arnaut <davi@haxent.com.br> + * Retrieve multiple signals with one read() call */ #include <linux/file.h> @@ -206,6 +208,59 @@ static int signalfd_copyinfo(struct signalfd_siginfo __user *uinfo, return err ? -EFAULT: sizeof(*uinfo); } +static ssize_t signalfd_dequeue(struct signalfd_ctx *ctx, siginfo_t *info, + int nonblock) +{ + ssize_t ret; + struct signalfd_lockctx lk; + DECLARE_WAITQUEUE(wait, current); + + if (!signalfd_lock(ctx, &lk)) + return 0; + + ret = dequeue_signal(lk.tsk, &ctx->sigmask, info); + switch (ret) { + case 0: + if (!nonblock) + break; + ret = -EAGAIN; + default: + signalfd_unlock(&lk); + return ret; + } + + add_wait_queue(&ctx->wqh, &wait); + for (;;) { + set_current_state(TASK_INTERRUPTIBLE); + ret = dequeue_signal(lk.tsk, &ctx->sigmask, info); + signalfd_unlock(&lk); + if (ret != 0) + break; + if (signal_pending(current)) { + ret = -ERESTARTSYS; + break; + } + schedule(); + ret = signalfd_lock(ctx, &lk); + if (unlikely(!ret)) { + /* + * Let the caller read zero byte, ala socket + * recv() when the peer disconnect. This test + * must be done before doing a dequeue_signal(), + * because if the sighand has been orphaned, + * the dequeue_signal() call is going to crash + * because ->sighand will be long gone. + */ + break; + } + } + + remove_wait_queue(&ctx->wqh, &wait); + __set_current_state(TASK_RUNNING); + + return ret; +} + /* * Returns either the size of a "struct signalfd_siginfo", or zero if the * sighand we are attached to, has been orphaned. The "count" parameter @@ -215,55 +270,30 @@ static ssize_t signalfd_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) { struct signalfd_ctx *ctx = file->private_data; - ssize_t res = 0; - int locked, signo; + struct signalfd_siginfo __user *siginfo; + int nonblock = file->f_flags & O_NONBLOCK; + ssize_t ret, total = 0; siginfo_t info; - struct signalfd_lockctx lk; - DECLARE_WAITQUEUE(wait, current); - if (count < sizeof(struct signalfd_siginfo)) + count /= sizeof(struct signalfd_siginfo); + if (!count) return -EINVAL; - locked = signalfd_lock(ctx, &lk); - if (!locked) - return 0; - res = -EAGAIN; - signo = dequeue_signal(lk.tsk, &ctx->sigmask, &info); - if (signo == 0 && !(file->f_flags & O_NONBLOCK)) { - add_wait_queue(&ctx->wqh, &wait); - for (;;) { - set_current_state(TASK_INTERRUPTIBLE); - signo = dequeue_signal(lk.tsk, &ctx->sigmask, &info); - if (signo != 0) - break; - if (signal_pending(current)) { - res = -ERESTARTSYS; - break; - } - signalfd_unlock(&lk); - schedule(); - locked = signalfd_lock(ctx, &lk); - if (unlikely(!locked)) { - /* - * Let the caller read zero byte, ala socket - * recv() when the peer disconnect. This test - * must be done before doing a dequeue_signal(), - * because if the sighand has been orphaned, - * the dequeue_signal() call is going to crash. - */ - res = 0; - break; - } - } - remove_wait_queue(&ctx->wqh, &wait); - __set_current_state(TASK_RUNNING); - } - if (likely(locked)) - signalfd_unlock(&lk); - if (likely(signo)) - res = signalfd_copyinfo((struct signalfd_siginfo __user *) buf, - &info); - return res; + siginfo = (struct signalfd_siginfo __user *) buf; + + do { + ret = signalfd_dequeue(ctx, &info, nonblock); + if (unlikely(ret <= 0)) + break; + ret = signalfd_copyinfo(siginfo, &info); + if (ret < 0) + break; + siginfo++; + total += ret; + nonblock = 1; + } while (--count); + + return total ? total : ret; } static const struct file_operations signalfd_fops = { diff --git a/fs/smbfs/dir.c b/fs/smbfs/dir.c index 50136b1a3eca12..48da4fa6b7d484 100644 --- a/fs/smbfs/dir.c +++ b/fs/smbfs/dir.c @@ -13,6 +13,7 @@ #include <linux/smp_lock.h> #include <linux/ctype.h> #include <linux/net.h> +#include <linux/sched.h> #include <linux/smb_fs.h> #include <linux/smb_mount.h> diff --git a/fs/smbfs/file.c b/fs/smbfs/file.c index f161797160c41a..aea3f8aa54c091 100644 --- a/fs/smbfs/file.c +++ b/fs/smbfs/file.c @@ -17,6 +17,7 @@ #include <linux/pagemap.h> #include <linux/smp_lock.h> #include <linux/net.h> +#include <linux/aio.h> #include <asm/uaccess.h> #include <asm/system.h> diff --git a/fs/smbfs/inode.c b/fs/smbfs/inode.c index 424a3ddf86dd38..6724a6cf01ff49 100644 --- a/fs/smbfs/inode.c +++ b/fs/smbfs/inode.c @@ -25,6 +25,7 @@ #include <linux/net.h> #include <linux/vfs.h> #include <linux/highuid.h> +#include <linux/sched.h> #include <linux/smb_fs.h> #include <linux/smbno.h> #include <linux/smb_mount.h> @@ -70,8 +71,7 @@ static void init_once(void * foo, struct kmem_cache * cachep, unsigned long flag { struct smb_inode_info *ei = (struct smb_inode_info *) foo; - if (flags & SLAB_CTOR_CONSTRUCTOR) - inode_init_once(&ei->vfs_inode); + inode_init_once(&ei->vfs_inode); } static int init_inodecache(void) diff --git a/fs/smbfs/request.c b/fs/smbfs/request.c index c288fbe7953d98..3f54a0f80fae45 100644 --- a/fs/smbfs/request.c +++ b/fs/smbfs/request.c @@ -11,6 +11,7 @@ #include <linux/fs.h> #include <linux/slab.h> #include <linux/net.h> +#include <linux/sched.h> #include <linux/smb_fs.h> #include <linux/smbno.h> diff --git a/fs/sysfs/inode.c b/fs/sysfs/inode.c index 4de5c6b899181b..bdd30e74de6b00 100644 --- a/fs/sysfs/inode.c +++ b/fs/sysfs/inode.c @@ -13,6 +13,7 @@ #include <linux/backing-dev.h> #include <linux/capability.h> #include <linux/errno.h> +#include <linux/sched.h> #include <asm/semaphore.h> #include "sysfs.h" diff --git a/fs/sysv/inode.c b/fs/sysv/inode.c index 3152d741560671..56441169339458 100644 --- a/fs/sysv/inode.c +++ b/fs/sysv/inode.c @@ -322,8 +322,7 @@ static void init_once(void *p, struct kmem_cache *cachep, unsigned long flags) { struct sysv_inode_info *si = (struct sysv_inode_info *)p; - if (flags & SLAB_CTOR_CONSTRUCTOR) - inode_init_once(&si->vfs_inode); + inode_init_once(&si->vfs_inode); } const struct super_operations sysv_sops = { diff --git a/fs/timerfd.c b/fs/timerfd.c index e329e37f15a846..af9eca5c02307e 100644 --- a/fs/timerfd.c +++ b/fs/timerfd.c @@ -24,7 +24,6 @@ struct timerfd_ctx { struct hrtimer tmr; ktime_t tintv; - spinlock_t lock; wait_queue_head_t wqh; int expired; }; @@ -39,10 +38,10 @@ static enum hrtimer_restart timerfd_tmrproc(struct hrtimer *htmr) struct timerfd_ctx *ctx = container_of(htmr, struct timerfd_ctx, tmr); unsigned long flags; - spin_lock_irqsave(&ctx->lock, flags); + spin_lock_irqsave(&ctx->wqh.lock, flags); ctx->expired = 1; wake_up_locked(&ctx->wqh); - spin_unlock_irqrestore(&ctx->lock, flags); + spin_unlock_irqrestore(&ctx->wqh.lock, flags); return HRTIMER_NORESTART; } @@ -83,10 +82,10 @@ static unsigned int timerfd_poll(struct file *file, poll_table *wait) poll_wait(file, &ctx->wqh, wait); - spin_lock_irqsave(&ctx->lock, flags); + spin_lock_irqsave(&ctx->wqh.lock, flags); if (ctx->expired) events |= POLLIN; - spin_unlock_irqrestore(&ctx->lock, flags); + spin_unlock_irqrestore(&ctx->wqh.lock, flags); return events; } @@ -101,7 +100,7 @@ static ssize_t timerfd_read(struct file *file, char __user *buf, size_t count, if (count < sizeof(ticks)) return -EINVAL; - spin_lock_irq(&ctx->lock); + spin_lock_irq(&ctx->wqh.lock); res = -EAGAIN; if (!ctx->expired && !(file->f_flags & O_NONBLOCK)) { __add_wait_queue(&ctx->wqh, &wait); @@ -115,9 +114,9 @@ static ssize_t timerfd_read(struct file *file, char __user *buf, size_t count, res = -ERESTARTSYS; break; } - spin_unlock_irq(&ctx->lock); + spin_unlock_irq(&ctx->wqh.lock); schedule(); - spin_lock_irq(&ctx->lock); + spin_lock_irq(&ctx->wqh.lock); } __remove_wait_queue(&ctx->wqh, &wait); __set_current_state(TASK_RUNNING); @@ -139,7 +138,7 @@ static ssize_t timerfd_read(struct file *file, char __user *buf, size_t count, } else ticks = 1; } - spin_unlock_irq(&ctx->lock); + spin_unlock_irq(&ctx->wqh.lock); if (ticks) res = put_user(ticks, buf) ? -EFAULT: sizeof(ticks); return res; @@ -176,7 +175,6 @@ asmlinkage long sys_timerfd(int ufd, int clockid, int flags, return -ENOMEM; init_waitqueue_head(&ctx->wqh); - spin_lock_init(&ctx->lock); timerfd_setup(ctx, clockid, flags, &ktmr); @@ -202,10 +200,10 @@ asmlinkage long sys_timerfd(int ufd, int clockid, int flags, * it to the new values. */ for (;;) { - spin_lock_irq(&ctx->lock); + spin_lock_irq(&ctx->wqh.lock); if (hrtimer_try_to_cancel(&ctx->tmr) >= 0) break; - spin_unlock_irq(&ctx->lock); + spin_unlock_irq(&ctx->wqh.lock); cpu_relax(); } /* @@ -213,7 +211,7 @@ asmlinkage long sys_timerfd(int ufd, int clockid, int flags, */ timerfd_setup(ctx, clockid, flags, &ktmr); - spin_unlock_irq(&ctx->lock); + spin_unlock_irq(&ctx->wqh.lock); fput(file); } diff --git a/fs/udf/file.c b/fs/udf/file.c index 40d5047defea91..51b5764685e777 100644 --- a/fs/udf/file.c +++ b/fs/udf/file.c @@ -36,6 +36,7 @@ #include <linux/smp_lock.h> #include <linux/pagemap.h> #include <linux/buffer_head.h> +#include <linux/aio.h> #include "udf_i.h" #include "udf_sb.h" diff --git a/fs/udf/namei.c b/fs/udf/namei.c index 91df4928651cdb..51fe307dc0ec02 100644 --- a/fs/udf/namei.c +++ b/fs/udf/namei.c @@ -30,6 +30,7 @@ #include <linux/quotaops.h> #include <linux/smp_lock.h> #include <linux/buffer_head.h> +#include <linux/sched.h> static inline int udf_match(int len1, const char *name1, int len2, const char *name2) { diff --git a/fs/udf/super.c b/fs/udf/super.c index 9b8644a06e53b9..3a743d854c17bf 100644 --- a/fs/udf/super.c +++ b/fs/udf/super.c @@ -134,10 +134,8 @@ static void init_once(void * foo, struct kmem_cache * cachep, unsigned long flag { struct udf_inode_info *ei = (struct udf_inode_info *) foo; - if (flags & SLAB_CTOR_CONSTRUCTOR) { - ei->i_ext.i_data = NULL; - inode_init_once(&ei->vfs_inode); - } + ei->i_ext.i_data = NULL; + inode_init_once(&ei->vfs_inode); } static int init_inodecache(void) diff --git a/fs/ufs/super.c b/fs/ufs/super.c index be7c48c5f203f1..22ff6ed55ce9a2 100644 --- a/fs/ufs/super.c +++ b/fs/ufs/super.c @@ -1237,8 +1237,7 @@ static void init_once(void * foo, struct kmem_cache * cachep, unsigned long flag { struct ufs_inode_info *ei = (struct ufs_inode_info *) foo; - if (flags & SLAB_CTOR_CONSTRUCTOR) - inode_init_once(&ei->vfs_inode); + inode_init_once(&ei->vfs_inode); } static int init_inodecache(void) diff --git a/fs/xfs/linux-2.6/xfs_aops.c b/fs/xfs/linux-2.6/xfs_aops.c index 4475588e973a4a..7361861e3aacde 100644 --- a/fs/xfs/linux-2.6/xfs_aops.c +++ b/fs/xfs/linux-2.6/xfs_aops.c @@ -701,7 +701,7 @@ xfs_is_delayed_page( else if (buffer_delay(bh)) acceptable = (type == IOMAP_DELAY); else if (buffer_dirty(bh) && buffer_mapped(bh)) - acceptable = (type == 0); + acceptable = (type == IOMAP_NEW); else break; } while ((bh = bh->b_this_page) != head); @@ -810,7 +810,7 @@ xfs_convert_page( page_dirty--; count++; } else { - type = 0; + type = IOMAP_NEW; if (buffer_mapped(bh) && all_bh && startio) { lock_buffer(bh); xfs_add_to_ioend(inode, bh, offset, @@ -968,8 +968,8 @@ xfs_page_state_convert( bh = head = page_buffers(page); offset = page_offset(page); - flags = -1; - type = IOMAP_READ; + flags = BMAPI_READ; + type = IOMAP_NEW; /* TODO: cleanup count and page_dirty */ @@ -999,14 +999,14 @@ xfs_page_state_convert( * * Third case, an unmapped buffer was found, and we are * in a path where we need to write the whole page out. - */ + */ if (buffer_unwritten(bh) || buffer_delay(bh) || ((buffer_uptodate(bh) || PageUptodate(page)) && !buffer_mapped(bh) && (unmapped || startio))) { - /* + /* * Make sure we don't use a read-only iomap */ - if (flags == BMAPI_READ) + if (flags == BMAPI_READ) iomap_valid = 0; if (buffer_unwritten(bh)) { @@ -1055,7 +1055,7 @@ xfs_page_state_convert( * That means it must already have extents allocated * underneath it. Map the extent by reading it. */ - if (!iomap_valid || type != IOMAP_READ) { + if (!iomap_valid || flags != BMAPI_READ) { flags = BMAPI_READ; size = xfs_probe_cluster(inode, page, bh, head, 1); @@ -1066,7 +1066,15 @@ xfs_page_state_convert( iomap_valid = xfs_iomap_valid(&iomap, offset); } - type = IOMAP_READ; + /* + * We set the type to IOMAP_NEW in case we are doing a + * small write at EOF that is extending the file but + * without needing an allocation. We need to update the + * file size on I/O completion in this case so it is + * the same case as having just allocated a new extent + * that we are writing into for the first time. + */ + type = IOMAP_NEW; if (!test_and_set_bit(BH_Lock, &bh->b_state)) { ASSERT(buffer_mapped(bh)); if (iomap_valid) diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c index 14e2cbe5a8d543..bf9a9d5909be0b 100644 --- a/fs/xfs/linux-2.6/xfs_super.c +++ b/fs/xfs/linux-2.6/xfs_super.c @@ -360,8 +360,7 @@ xfs_fs_inode_init_once( kmem_zone_t *zonep, unsigned long flags) { - if (flags & SLAB_CTOR_CONSTRUCTOR) - inode_init_once(vn_to_inode((bhv_vnode_t *)vnode)); + inode_init_once(vn_to_inode((bhv_vnode_t *)vnode)); } STATIC int diff --git a/include/acpi/acpi_numa.h b/include/acpi/acpi_numa.h index f9d2bde9a7bbac..b62cd36ff32477 100644 --- a/include/acpi/acpi_numa.h +++ b/include/acpi/acpi_numa.h @@ -11,11 +11,8 @@ #define MAX_PXM_DOMAINS (256) /* Old pxm spec is defined 8 bit */ #endif -extern int __cpuinitdata pxm_to_node_map[MAX_PXM_DOMAINS]; -extern int __cpuinitdata node_to_pxm_map[MAX_NUMNODES]; - -extern int __cpuinit pxm_to_node(int); -extern int __cpuinit node_to_pxm(int); +extern int pxm_to_node(int); +extern int node_to_pxm(int); extern int __cpuinit acpi_map_pxm_to_node(int); extern void __cpuinit acpi_unmap_pxm_to_node(int); diff --git a/include/asm-alpha/bitops.h b/include/asm-alpha/bitops.h index 4b6ef7f21b9396..3a0cbeb03fa17e 100644 --- a/include/asm-alpha/bitops.h +++ b/include/asm-alpha/bitops.h @@ -313,32 +313,29 @@ static inline int ffs(int word) * fls: find last bit set. */ #if defined(CONFIG_ALPHA_EV6) && defined(CONFIG_ALPHA_EV67) -static inline int fls(int word) +static inline int fls64(unsigned long word) { - return 64 - __kernel_ctlz(word & 0xffffffff); + return 64 - __kernel_ctlz(word); } #else -#include <asm-generic/bitops/fls.h> -#endif -#include <asm-generic/bitops/fls64.h> +extern const unsigned char __flsm1_tab[256]; -/* Compute powers of two for the given integer. */ -static inline long floor_log2(unsigned long word) +static inline int fls64(unsigned long x) { -#if defined(CONFIG_ALPHA_EV6) && defined(CONFIG_ALPHA_EV67) - return 63 - __kernel_ctlz(word); -#else - long bit; - for (bit = -1; word ; bit++) - word >>= 1; - return bit; -#endif + unsigned long t, a, r; + + t = __kernel_cmpbge (x, 0x0101010101010101); + a = __flsm1_tab[t]; + t = __kernel_extbl (x, a); + r = a*8 + __flsm1_tab[t] + (x != 0); + + return r; } +#endif -static inline long ceil_log2(unsigned long word) +static inline int fls(int x) { - long bit = floor_log2(word); - return bit + (word > (1UL << bit)); + return fls64((unsigned int) x); } /* @@ -353,9 +350,20 @@ static inline unsigned long hweight64(unsigned long w) return __kernel_ctpop(w); } -#define hweight32(x) (unsigned int) hweight64((x) & 0xfffffffful) -#define hweight16(x) (unsigned int) hweight64((x) & 0xfffful) -#define hweight8(x) (unsigned int) hweight64((x) & 0xfful) +static inline unsigned int hweight32(unsigned int w) +{ + return hweight64(w); +} + +static inline unsigned int hweight16(unsigned int w) +{ + return hweight64(w & 0xffff); +} + +static inline unsigned int hweight8(unsigned int w) +{ + return hweight64(w & 0xff); +} #else #include <asm-generic/bitops/hweight.h> #endif diff --git a/include/asm-alpha/thread_info.h b/include/asm-alpha/thread_info.h index f4defc2bd3fb24..48a22e3e6f3216 100644 --- a/include/asm-alpha/thread_info.h +++ b/include/asm-alpha/thread_info.h @@ -76,12 +76,14 @@ register struct thread_info *__current_thread_info __asm__("$8"); #define TIF_UAC_NOFIX 7 #define TIF_UAC_SIGBUS 8 #define TIF_MEMDIE 9 +#define TIF_RESTORE_SIGMASK 10 /* restore signal mask in do_signal */ #define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE) #define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME) #define _TIF_SIGPENDING (1<<TIF_SIGPENDING) #define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED) #define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG) +#define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK) /* Work to do on interrupt/exception return. */ #define _TIF_WORK_MASK (_TIF_NOTIFY_RESUME \ diff --git a/include/asm-alpha/unistd.h b/include/asm-alpha/unistd.h index e58a427012dd3c..29bf2fdc91c0ee 100644 --- a/include/asm-alpha/unistd.h +++ b/include/asm-alpha/unistd.h @@ -233,6 +233,20 @@ #define __NR_osf_memcntl 260 /* not implemented */ #define __NR_osf_fdatasync 261 /* not implemented */ +/* + * Ignore legacy syscalls that we don't use. + */ +#define __IGNORE_alarm +#define __IGNORE_creat +#define __IGNORE_getegid +#define __IGNORE_geteuid +#define __IGNORE_getgid +#define __IGNORE_getpid +#define __IGNORE_getppid +#define __IGNORE_getuid +#define __IGNORE_pause +#define __IGNORE_time +#define __IGNORE_utime /* * Linux-specific system calls begin at 300 @@ -387,10 +401,42 @@ #define __NR_inotify_init 444 #define __NR_inotify_add_watch 445 #define __NR_inotify_rm_watch 446 +#define __NR_fdatasync 447 +#define __NR_kexec_load 448 +#define __NR_migrate_pages 449 +#define __NR_openat 450 +#define __NR_mkdirat 451 +#define __NR_mknodat 452 +#define __NR_fchownat 453 +#define __NR_futimesat 454 +#define __NR_fstatat64 455 +#define __NR_unlinkat 456 +#define __NR_renameat 457 +#define __NR_linkat 458 +#define __NR_symlinkat 459 +#define __NR_readlinkat 460 +#define __NR_fchmodat 461 +#define __NR_faccessat 462 +#define __NR_pselect6 463 +#define __NR_ppoll 464 +#define __NR_unshare 465 +#define __NR_set_robust_list 466 +#define __NR_get_robust_list 467 +#define __NR_splice 468 +#define __NR_sync_file_range 469 +#define __NR_tee 470 +#define __NR_vmsplice 471 +#define __NR_move_pages 472 +#define __NR_getcpu 473 +#define __NR_epoll_pwait 474 +#define __NR_utimensat 475 +#define __NR_signalfd 476 +#define __NR_timerfd 477 +#define __NR_eventfd 478 #ifdef __KERNEL__ -#define NR_SYSCALLS 447 +#define NR_SYSCALLS 479 #define __ARCH_WANT_IPC_PARSE_VERSION #define __ARCH_WANT_OLD_READDIR diff --git a/include/asm-arm/arch-at91/at91_adc.h b/include/asm-arm/arch-at91/at91_adc.h index 1ed66eaaf83a6f..6d71ea2637b192 100644 --- a/include/asm-arm/arch-at91/at91_adc.h +++ b/include/asm-arm/arch-at91/at91_adc.h @@ -55,7 +55,7 @@ #define AT91_ADC_IDR 0x28 /* Interrupt Disable Register */ #define AT91_ADC_IMR 0x2C /* Interrupt Mask Register */ -#define AT91_ADC_CHR(n) (0x30 + ((n) * 4) /* Channel Data Register N */ +#define AT91_ADC_CHR(n) (0x30 + ((n) * 4)) /* Channel Data Register N */ #define AT91_ADC_DATA (0x3ff) #endif diff --git a/include/asm-arm/arch-integrator/smp.h b/include/asm-arm/arch-integrator/smp.h deleted file mode 100644 index ab2c79bb95050c..00000000000000 --- a/include/asm-arm/arch-integrator/smp.h +++ /dev/null @@ -1,18 +0,0 @@ -#ifndef ASMARM_ARCH_SMP_H -#define ASMARM_ARCH_SMP_H - - -#include <asm/hardware.h> -#include <asm/io.h> - -#define hard_smp_processor_id() \ - ({ \ - unsigned int cpunum; \ - __asm__("mrc p15, 0, %0, c0, c0, 5" \ - : "=r" (cpunum)); \ - cpunum &= 0x0F; \ - }) - -extern void secondary_scan_irqs(void); - -#endif diff --git a/include/asm-arm/arch-ixp4xx/nas100d.h b/include/asm-arm/arch-ixp4xx/nas100d.h index 84467a5190d093..131e0a1d0df395 100644 --- a/include/asm-arm/arch-ixp4xx/nas100d.h +++ b/include/asm-arm/arch-ixp4xx/nas100d.h @@ -10,7 +10,7 @@ * based on ixdp425.h: * Copyright 2004 (c) MontaVista, Software, Inc. * - * This file is licensed under the terms of the GNU General Public + * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ @@ -36,31 +36,11 @@ #define NAS100D_PCI_INTD_PIN 8 #define NAS100D_PCI_INTE_PIN 7 -/* GPIO */ - -#define NAS100D_GPIO0 0 -#define NAS100D_GPIO1 1 -#define NAS100D_GPIO2 2 -#define NAS100D_GPIO3 3 -#define NAS100D_GPIO4 4 -#define NAS100D_GPIO5 5 -#define NAS100D_GPIO6 6 -#define NAS100D_GPIO7 7 -#define NAS100D_GPIO8 8 -#define NAS100D_GPIO9 9 -#define NAS100D_GPIO10 10 -#define NAS100D_GPIO11 11 -#define NAS100D_GPIO12 12 -#define NAS100D_GPIO13 13 -#define NAS100D_GPIO14 14 -#define NAS100D_GPIO15 15 - - /* Buttons */ -#define NAS100D_PB_GPIO NAS100D_GPIO14 -#define NAS100D_RB_GPIO NAS100D_GPIO4 -#define NAS100D_PO_GPIO NAS100D_GPIO12 /* power off */ +#define NAS100D_PB_GPIO 14 +#define NAS100D_RB_GPIO 4 +#define NAS100D_PO_GPIO 12 /* power off */ #define NAS100D_PB_IRQ IRQ_IXP4XX_GPIO14 #define NAS100D_RB_IRQ IRQ_IXP4XX_GPIO4 diff --git a/include/asm-arm/arch-ixp4xx/nslu2.h b/include/asm-arm/arch-ixp4xx/nslu2.h index 6b437f7c99550e..850fdc5b45da21 100644 --- a/include/asm-arm/arch-ixp4xx/nslu2.h +++ b/include/asm-arm/arch-ixp4xx/nslu2.h @@ -9,7 +9,7 @@ * based on ixdp425.h: * Copyright 2004 (c) MontaVista, Software, Inc. * - * This file is licensed under the terms of the GNU General Public + * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ @@ -34,36 +34,14 @@ #define NSLU2_PCI_INTC_PIN 9 #define NSLU2_PCI_INTD_PIN 8 - /* NSLU2 Timer */ #define NSLU2_FREQ 66000000 -#define NSLU2_CLOCK_TICK_RATE (((NSLU2_FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ) -#define NSLU2_CLOCK_TICKS_PER_USEC ((NSLU2_CLOCK_TICK_RATE + USEC_PER_SEC/2) / USEC_PER_SEC) - -/* GPIO */ - -#define NSLU2_GPIO0 0 -#define NSLU2_GPIO1 1 -#define NSLU2_GPIO2 2 -#define NSLU2_GPIO3 3 -#define NSLU2_GPIO4 4 -#define NSLU2_GPIO5 5 -#define NSLU2_GPIO6 6 -#define NSLU2_GPIO7 7 -#define NSLU2_GPIO8 8 -#define NSLU2_GPIO9 9 -#define NSLU2_GPIO10 10 -#define NSLU2_GPIO11 11 -#define NSLU2_GPIO12 12 -#define NSLU2_GPIO13 13 -#define NSLU2_GPIO14 14 -#define NSLU2_GPIO15 15 /* Buttons */ -#define NSLU2_PB_GPIO NSLU2_GPIO5 -#define NSLU2_PO_GPIO NSLU2_GPIO8 /* power off */ -#define NSLU2_RB_GPIO NSLU2_GPIO12 +#define NSLU2_PB_GPIO 5 +#define NSLU2_PO_GPIO 8 /* power off */ +#define NSLU2_RB_GPIO 12 #define NSLU2_PB_IRQ IRQ_IXP4XX_GPIO5 #define NSLU2_RB_IRQ IRQ_IXP4XX_GPIO12 @@ -79,16 +57,16 @@ /* LEDs */ -#define NSLU2_LED_RED NSLU2_GPIO0 -#define NSLU2_LED_GRN NSLU2_GPIO1 +#define NSLU2_LED_RED_GPIO 0 +#define NSLU2_LED_GRN_GPIO 1 -#define NSLU2_LED_RED_BM (1L << NSLU2_LED_RED) -#define NSLU2_LED_GRN_BM (1L << NSLU2_LED_GRN) +#define NSLU2_LED_RED_BM (1L << NSLU2_LED_RED_GPIO) +#define NSLU2_LED_GRN_BM (1L << NSLU2_LED_GRN_GPIO) -#define NSLU2_LED_DISK1 NSLU2_GPIO3 -#define NSLU2_LED_DISK2 NSLU2_GPIO2 +#define NSLU2_LED_DISK1_GPIO 3 +#define NSLU2_LED_DISK2_GPIO 2 -#define NSLU2_LED_DISK1_BM (1L << NSLU2_GPIO2) -#define NSLU2_LED_DISK2_BM (1L << NSLU2_GPIO3) +#define NSLU2_LED_DISK1_BM (1L << NSLU2_LED_DISK1_GPIO) +#define NSLU2_LED_DISK2_BM (1L << NSLU2_LED_DISK2_GPIO) diff --git a/include/asm-arm/arch-ixp4xx/platform.h b/include/asm-arm/arch-ixp4xx/platform.h index ab194e5f66537c..2a44d3d6798078 100644 --- a/include/asm-arm/arch-ixp4xx/platform.h +++ b/include/asm-arm/arch-ixp4xx/platform.h @@ -113,6 +113,7 @@ extern unsigned long ixp4xx_timer_freq; extern void ixp4xx_map_io(void); extern void ixp4xx_init_irq(void); extern void ixp4xx_sys_init(void); +extern void ixp4xx_timer_init(void); extern struct sys_timer ixp4xx_timer; extern void ixp4xx_pci_preinit(void); struct pci_sys_data; diff --git a/include/asm-arm/arch-s3c2410/irqs.h b/include/asm-arm/arch-s3c2410/irqs.h index c79cb18199138e..3b49cd1c345c28 100644 --- a/include/asm-arm/arch-s3c2410/irqs.h +++ b/include/asm-arm/arch-s3c2410/irqs.h @@ -124,7 +124,7 @@ #define IRQ_S3C2443_DMA S3C2410_IRQ(17) /* IRQ_DMA1 */ #define IRQ_S3C2443_UART3 S3C2410_IRQ(18) /* IRQ_DMA2 */ #define IRQ_S3C2443_CFCON S3C2410_IRQ(19) /* IRQ_DMA3 */ -#define IRQ_S3C2443_SDI1 S3C2410_IRQ(20) /* IRQ_SDI */ +#define IRQ_S3C2443_HSMMC S3C2410_IRQ(20) /* IRQ_SDI */ #define IRQ_S3C2443_NAND S3C2410_IRQ(24) /* reserved */ #define IRQ_S3C2443_LCD1 S3C2410_IRQSUB(14) diff --git a/include/asm-arm/arch-s3c2410/map.h b/include/asm-arm/arch-s3c2410/map.h index 4505aefbad1717..19e77f038042ec 100644 --- a/include/asm-arm/arch-s3c2410/map.h +++ b/include/asm-arm/arch-s3c2410/map.h @@ -153,6 +153,10 @@ #define S3C2440_PA_AC97 (0x5B000000) #define S3C2440_SZ_AC97 SZ_1M +/* S3C2443 High-speed SD/MMC */ +#define S3C2443_PA_HSMMC (0x4A800000) +#define S3C2443_SZ_HSMMC (256) + /* ISA style IO, for each machine to sort out mappings for, if it * implements it. We reserve two 16M regions for ISA. */ diff --git a/include/asm-arm/arch-s3c2410/regs-gpioj.h b/include/asm-arm/arch-s3c2410/regs-gpioj.h index 02131a5a1d3af1..0362332faaf02c 100644 --- a/include/asm-arm/arch-s3c2410/regs-gpioj.h +++ b/include/asm-arm/arch-s3c2410/regs-gpioj.h @@ -98,5 +98,9 @@ #define S3C2440_GPJ12_OUTP (0x01 << 24) #define S3C2440_GPJ12_CAMRESET (0x02 << 24) +#define S3C2443_GPJ13 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 13) +#define S3C2443_GPJ14 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 14) +#define S3C2443_GPJ15 S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 15) + #endif /* __ASM_ARCH_REGS_GPIOJ_H */ diff --git a/include/asm-arm/arch-s3c2410/regs-s3c2412.h b/include/asm-arm/arch-s3c2410/regs-s3c2412.h new file mode 100644 index 00000000000000..8ca6a3bc8555f3 --- /dev/null +++ b/include/asm-arm/arch-s3c2410/regs-s3c2412.h @@ -0,0 +1,21 @@ +/* linux/include/asm-arm/arch-s3c2410/regs-s3c2412.h + * + * Copyright 2007 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2412 specific register definitions +*/ + +#ifndef __ASM_ARCH_REGS_S3C2412_H +#define __ASM_ARCH_REGS_S3C2412_H "s3c2412" + +#define S3C2412_SWRST (S3C24XX_VA_CLKPWR + 0x30) +#define S3C2412_SWRST_RESET (0x533C2412) + +#endif /* __ASM_ARCH_REGS_S3C2412_H */ + diff --git a/include/asm-arm/arch-s3c2410/regs-spi.h b/include/asm-arm/arch-s3c2410/regs-spi.h index 3552280d1e8f3f..4a499a138256e7 100644 --- a/include/asm-arm/arch-s3c2410/regs-spi.h +++ b/include/asm-arm/arch-s3c2410/regs-spi.h @@ -12,6 +12,8 @@ #ifndef __ASM_ARCH_REGS_SPI_H #define __ASM_ARCH_REGS_SPI_H +#define S3C2410_SPI1 (0x20) +#define S3C2412_SPI1 (0x100) #define S3C2410_SPCON (0x00) diff --git a/include/asm-arm/io.h b/include/asm-arm/io.h index 8261ff9e795575..1d3caa42a3869b 100644 --- a/include/asm-arm/io.h +++ b/include/asm-arm/io.h @@ -259,9 +259,11 @@ extern void pci_iounmap(struct pci_dev *dev, void __iomem *addr); #define BIOVEC_MERGEABLE(vec1, vec2) \ ((bvec_to_phys((vec1)) + (vec1)->bv_len) == bvec_to_phys((vec2))) +#ifdef CONFIG_MMU #define ARCH_HAS_VALID_PHYS_ADDR_RANGE extern int valid_phys_addr_range(unsigned long addr, size_t size); extern int valid_mmap_phys_addr_range(unsigned long pfn, size_t size); +#endif /* * Convert a physical pointer to a virtual kernel pointer for /dev/mem diff --git a/include/asm-arm/ioctls.h b/include/asm-arm/ioctls.h index bb9a7aa10c12eb..a91d8a1523cff6 100644 --- a/include/asm-arm/ioctls.h +++ b/include/asm-arm/ioctls.h @@ -46,6 +46,10 @@ #define TIOCSBRK 0x5427 /* BSD compatibility */ #define TIOCCBRK 0x5428 /* BSD compatibility */ #define TIOCGSID 0x5429 /* Return the session ID of FD */ +#define TCGETS2 _IOR('T',0x2A, struct termios2) +#define TCSETS2 _IOW('T',0x2B, struct termios2) +#define TCSETSW2 _IOW('T',0x2C, struct termios2) +#define TCSETSF2 _IOW('T',0x2D, struct termios2) #define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ #define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ diff --git a/include/asm-arm/mach/arch.h b/include/asm-arm/mach/arch.h index fd2f9bf4dcc68d..c59fad18e73b0d 100644 --- a/include/asm-arm/mach/arch.h +++ b/include/asm-arm/mach/arch.h @@ -49,7 +49,7 @@ struct machine_desc { */ #define MACHINE_START(_type,_name) \ static const struct machine_desc __mach_desc_##_type \ - __attribute_used__ \ + __used \ __attribute__((__section__(".arch.info.init"))) = { \ .nr = MACH_TYPE_##_type, \ .name = _name, diff --git a/include/asm-arm/mmu.h b/include/asm-arm/mmu.h index fe2a23b5627bc4..53099d4ee4211d 100644 --- a/include/asm-arm/mmu.h +++ b/include/asm-arm/mmu.h @@ -4,13 +4,13 @@ #ifdef CONFIG_MMU typedef struct { -#if __LINUX_ARM_ARCH__ >= 6 +#ifdef CONFIG_CPU_HAS_ASID unsigned int id; #endif unsigned int kvm_seq; } mm_context_t; -#if __LINUX_ARM_ARCH__ >= 6 +#ifdef CONFIG_CPU_HAS_ASID #define ASID(mm) ((mm)->context.id & 255) #else #define ASID(mm) (0) diff --git a/include/asm-arm/mmu_context.h b/include/asm-arm/mmu_context.h index 4981ad419198d1..6913d02ca5d615 100644 --- a/include/asm-arm/mmu_context.h +++ b/include/asm-arm/mmu_context.h @@ -20,7 +20,7 @@ void __check_kvm_seq(struct mm_struct *mm); -#if __LINUX_ARM_ARCH__ >= 6 +#ifdef CONFIG_CPU_HAS_ASID /* * On ARMv6, we have the following structure in the Context ID: diff --git a/include/asm-arm/plat-s3c24xx/devs.h b/include/asm-arm/plat-s3c24xx/devs.h index dddf485fc0670f..f9d6f0317bc195 100644 --- a/include/asm-arm/plat-s3c24xx/devs.h +++ b/include/asm-arm/plat-s3c24xx/devs.h @@ -29,6 +29,7 @@ extern struct platform_device s3c_device_iis; extern struct platform_device s3c_device_rtc; extern struct platform_device s3c_device_adc; extern struct platform_device s3c_device_sdi; +extern struct platform_device s3c_device_hsmmc; extern struct platform_device s3c_device_spi0; extern struct platform_device s3c_device_spi1; diff --git a/include/asm-arm/setup.h b/include/asm-arm/setup.h index e5407392afcad0..7bbf105463f1ad 100644 --- a/include/asm-arm/setup.h +++ b/include/asm-arm/setup.h @@ -185,7 +185,7 @@ struct tagtable { #ifdef __KERNEL__ -#define __tag __attribute_used__ __attribute__((__section__(".taglist.init"))) +#define __tag __used __attribute__((__section__(".taglist.init"))) #define __tagtable(tag, fn) \ static struct tagtable __tagtable_##fn __tag = { tag, fn } @@ -218,7 +218,7 @@ struct early_params { }; #define __early_param(name,fn) \ -static struct early_params __early_##fn __attribute_used__ \ +static struct early_params __early_##fn __used \ __attribute__((__section__(".early_param.init"))) = { name, fn } #endif /* __KERNEL__ */ diff --git a/include/asm-arm/termbits.h b/include/asm-arm/termbits.h index a3f4fe1742d0ac..f784d11f40b5e6 100644 --- a/include/asm-arm/termbits.h +++ b/include/asm-arm/termbits.h @@ -15,6 +15,17 @@ struct termios { cc_t c_cc[NCCS]; /* control characters */ }; +struct termios2 { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + struct ktermios { tcflag_t c_iflag; /* input mode flags */ tcflag_t c_oflag; /* output mode flags */ @@ -128,6 +139,7 @@ struct ktermios { #define HUPCL 0002000 #define CLOCAL 0004000 #define CBAUDEX 0010000 +#define BOTHER 0010000 #define B57600 0010001 #define B115200 0010002 #define B230400 0010003 @@ -143,10 +155,12 @@ struct ktermios { #define B3000000 0010015 #define B3500000 0010016 #define B4000000 0010017 -#define CIBAUD 002003600000 /* input baud rate (not used) */ +#define CIBAUD 002003600000 /* input baud rate */ #define CMSPAR 010000000000 /* mark or space (stick) parity */ #define CRTSCTS 020000000000 /* flow control */ +#define IBSHIFT 16 + /* c_lflag bits */ #define ISIG 0000001 #define ICANON 0000002 diff --git a/include/asm-arm/termios.h b/include/asm-arm/termios.h index 329c324c4040c9..293e3f1bc3f22c 100644 --- a/include/asm-arm/termios.h +++ b/include/asm-arm/termios.h @@ -82,8 +82,10 @@ struct termio { copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \ }) -#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios)) -#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios)) +#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2)) +#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2)) +#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios)) +#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios)) #endif /* __KERNEL__ */ diff --git a/include/asm-arm/tlbflush.h b/include/asm-arm/tlbflush.h index 08c6991dc9c992..71be4fded7e20f 100644 --- a/include/asm-arm/tlbflush.h +++ b/include/asm-arm/tlbflush.h @@ -138,12 +138,27 @@ # define v6wbi_always_flags (-1UL) #endif +#ifdef CONFIG_CPU_TLB_V7 +# define v7wbi_possible_flags v6wbi_tlb_flags +# define v7wbi_always_flags v6wbi_tlb_flags +# ifdef _TLB +# define MULTI_TLB 1 +# else +# define _TLB v7wbi +# endif +#else +# define v7wbi_possible_flags 0 +# define v7wbi_always_flags (-1UL) +#endif + #ifndef _TLB #error Unknown TLB model #endif #ifndef __ASSEMBLY__ +#include <linux/sched.h> + struct cpu_tlb_fns { void (*flush_user_range)(unsigned long, unsigned long, struct vm_area_struct *); void (*flush_kern_range)(unsigned long, unsigned long); diff --git a/include/asm-arm/unistd.h b/include/asm-arm/unistd.h index c025ab47e4b976..250d7f145acaed 100644 --- a/include/asm-arm/unistd.h +++ b/include/asm-arm/unistd.h @@ -373,6 +373,10 @@ #define __NR_getcpu (__NR_SYSCALL_BASE+345) /* 346 for epoll_pwait */ #define __NR_kexec_load (__NR_SYSCALL_BASE+347) +#define __NR_utimensat (__NR_SYSCALL_BASE+348) +#define __NR_signalfd (__NR_SYSCALL_BASE+349) +#define __NR_timerfd (__NR_SYSCALL_BASE+350) +#define __NR_eventfd (__NR_SYSCALL_BASE+351) /* * The following SWIs are ARM private. @@ -433,5 +437,11 @@ */ #define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall") +/* + * Unimplemented (or alternatively implemented) syscalls + */ +#define __IGNORE_sync_file_range 1 +#define __IGNORE_fadvise64_64 1 + #endif /* __KERNEL__ */ #endif /* __ASM_ARM_UNISTD_H */ diff --git a/include/asm-arm26/setup.h b/include/asm-arm26/setup.h index 10fd07c7666264..e8256230647558 100644 --- a/include/asm-arm26/setup.h +++ b/include/asm-arm26/setup.h @@ -173,7 +173,7 @@ struct tagtable { int (*parse)(const struct tag *); }; -#define __tag __attribute_used__ __attribute__((__section__(".taglist"))) +#define __tag __used __attribute__((__section__(".taglist"))) #define __tagtable(tag, fn) \ static struct tagtable __tagtable_##fn __tag = { tag, fn } diff --git a/include/asm-avr32/arch-at32ap/board.h b/include/asm-avr32/arch-at32ap/board.h index 1a7b07d436ffe4..9fd2e32f84b8a8 100644 --- a/include/asm-avr32/arch-at32ap/board.h +++ b/include/asm-avr32/arch-at32ap/board.h @@ -30,11 +30,9 @@ struct spi_board_info; struct platform_device * at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n); -struct lcdc_platform_data { - unsigned long fbmem_start; - unsigned long fbmem_size; -}; +struct atmel_lcdfb_info; struct platform_device * -at32_add_device_lcdc(unsigned int id, struct lcdc_platform_data *data); +at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data, + unsigned long fbmem_start, unsigned long fbmem_len); #endif /* __ASM_ARCH_BOARD_H */ diff --git a/include/asm-avr32/kdebug.h b/include/asm-avr32/kdebug.h index de419278fc39da..7f54e2b15d136a 100644 --- a/include/asm-avr32/kdebug.h +++ b/include/asm-avr32/kdebug.h @@ -5,13 +5,22 @@ /* Grossly misnamed. */ enum die_val { - DIE_FAULT, DIE_BREAKPOINT, DIE_SSTEP, - DIE_PAGE_FAULT, }; -int register_page_fault_notifier(struct notifier_block *nb); -int unregister_page_fault_notifier(struct notifier_block *nb); +/* + * These are only here because kprobes.c wants them to implement a + * blatant layering violation. Will hopefully go away soon once all + * architectures are updated. + */ +static inline int register_page_fault_notifier(struct notifier_block *nb) +{ + return 0; +} +static inline int unregister_page_fault_notifier(struct notifier_block *nb) +{ + return 0; +} #endif /* __ASM_AVR32_KDEBUG_H */ diff --git a/include/asm-avr32/kprobes.h b/include/asm-avr32/kprobes.h index 09a5cbe2f8969f..190a6377c80969 100644 --- a/include/asm-avr32/kprobes.h +++ b/include/asm-avr32/kprobes.h @@ -26,6 +26,7 @@ struct arch_specific_insn { kprobe_opcode_t insn[MAX_INSN_SIZE]; }; +extern int kprobe_fault_handler(struct pt_regs *regs, int trapnr); extern int kprobe_exceptions_notify(struct notifier_block *self, unsigned long val, void *data); diff --git a/include/asm-avr32/unistd.h b/include/asm-avr32/unistd.h index 2418cce624cc18..3b4e35b55c8222 100644 --- a/include/asm-avr32/unistd.h +++ b/include/asm-avr32/unistd.h @@ -296,9 +296,12 @@ #define __NR_shmctl 277 #define __NR_utimensat 278 +#define __NR_signalfd 279 +#define __NR_timerfd 280 +#define __NR_eventfd 281 #ifdef __KERNEL__ -#define NR_syscalls 279 +#define NR_syscalls 282 #define __ARCH_WANT_IPC_PARSE_VERSION diff --git a/include/asm-blackfin/bfin-global.h b/include/asm-blackfin/bfin-global.h index e37f81609fc3d9..57f37ccdcdf1db 100644 --- a/include/asm-blackfin/bfin-global.h +++ b/include/asm-blackfin/bfin-global.h @@ -104,6 +104,7 @@ extern unsigned long dpdt_swapcount_table[]; extern unsigned long table_start, table_end; +extern u16 _bfin_swrst; /* shadow for Software Reset Register (SWRST) */ extern struct file_operations dpmc_fops; extern char _start; extern unsigned long _ramstart, _ramend, _rambase; diff --git a/include/asm-blackfin/gpio.h b/include/asm-blackfin/gpio.h index d16fe3cd613583..aa0d5503e232f4 100644 --- a/include/asm-blackfin/gpio.h +++ b/include/asm-blackfin/gpio.h @@ -148,10 +148,6 @@ #ifdef BF537_FAMILY #define MAX_BLACKFIN_GPIOS 48 -#define PORT_F 0 -#define PORT_G 1 -#define PORT_H 2 -#define PORT_J 3 #define GPIO_PF0 0 #define GPIO_PF1 1 @@ -202,13 +198,17 @@ #define GPIO_PH14 46 #define GPIO_PH15 47 +#define PORT_F GPIO_PF0 +#define PORT_G GPIO_PG0 +#define PORT_H GPIO_PH0 + #endif #ifdef BF561_FAMILY #define MAX_BLACKFIN_GPIOS 48 -#define PORT_FIO0 0 -#define PORT_FIO1 1 -#define PORT_FIO2 2 +#define PORT_FIO0 GPIO_0 +#define PORT_FIO1 GPIO_16 +#define PORT_FIO2 GPIO_32 #endif #ifndef __ASSEMBLY__ diff --git a/include/asm-blackfin/io.h b/include/asm-blackfin/io.h index 7e6995e80d97c7..eac8bcaf64c290 100644 --- a/include/asm-blackfin/io.h +++ b/include/asm-blackfin/io.h @@ -115,13 +115,21 @@ static inline unsigned int readl(void __iomem *addr) #ifndef __ASSEMBLY__ -extern void outsb(void __iomem *port, const void *addr, unsigned long count); -extern void outsw(void __iomem *port, const void *addr, unsigned long count); -extern void outsl(void __iomem *port, const void *addr, unsigned long count); +extern void outsb(void __iomem *port, const void *addr, unsigned short count); +extern void outsw(void __iomem *port, const void *addr, unsigned short count); +extern void outsl(void __iomem *port, const void *addr, unsigned short count); -extern void insb(const void __iomem *port, void *addr, unsigned long count); -extern void insw(const void __iomem *port, void *addr, unsigned long count); -extern void insl(const void __iomem *port, void *addr, unsigned long count); +extern void insb(const void __iomem *port, void *addr, unsigned short count); +extern void insw(const void __iomem *port, void *addr, unsigned short count); +extern void insl(const void __iomem *port, void *addr, unsigned short count); + +extern void dma_outsb(void __iomem *port, const void *addr, unsigned short count); +extern void dma_outsw(void __iomem *port, const void *addr, unsigned short count); +extern void dma_outsl(void __iomem *port, const void *addr, unsigned short count); + +extern void dma_insb(const void __iomem *port, void *addr, unsigned short count); +extern void dma_insw(const void __iomem *port, void *addr, unsigned short count); +extern void dma_insl(const void __iomem *port, void *addr, unsigned short count); /* * Map some physical address range into the kernel address space. diff --git a/include/asm-blackfin/mach-bf527/cdefBF522.h b/include/asm-blackfin/mach-bf527/cdefBF522.h new file mode 100644 index 00000000000000..52c06494b88692 --- /dev/null +++ b/include/asm-blackfin/mach-bf527/cdefBF522.h @@ -0,0 +1,46 @@ +/* + * File: include/asm-blackfin/mach-bf527/cdefbf522.h + * Based on: + * Author: + * + * Created: + * Description: system mmr register map + * + * Rev: + * + * Modified: + * + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _CDEF_BF522_H +#define _CDEF_BF522_H + +/* include all Core registers and bit definitions */ +#include "defBF522.h" + +/* include core specific register pointer definitions */ +#include <asm/mach-common/cdef_LPBlackfin.h> + +/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF522 */ + +/* include cdefBF52x_base.h for the set of #defines that are common to all ADSP-BF52x processors */ +#include "cdefBF52x_base.h" + +#endif /* _CDEF_BF522_H */ diff --git a/include/asm-blackfin/mach-bf527/cdefBF525.h b/include/asm-blackfin/mach-bf527/cdefBF525.h new file mode 100644 index 00000000000000..2cc67e4b4d86b9 --- /dev/null +++ b/include/asm-blackfin/mach-bf527/cdefBF525.h @@ -0,0 +1,461 @@ +/* + * File: include/asm-blackfin/mach-bf527/cdefbf525.h + * Based on: + * Author: + * + * Created: + * Description: system mmr register map + * + * Rev: + * + * Modified: + * + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _CDEF_BF525_H +#define _CDEF_BF525_H + +/* include all Core registers and bit definitions */ +#include "defBF525.h" + +/* include core specific register pointer definitions */ +#include <asm/mach-common/cdef_LPBlackfin.h> + +/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF525 */ + +/* include cdefBF52x_base.h for the set of #defines that are common to all ADSP-BF52x processors */ +#include "cdefBF52x_base.h" + +/* The following are the #defines needed by ADSP-BF525 that are not in the common header */ + +/* USB Control Registers */ + +#define bfin_read_USB_FADDR() bfin_read16(USB_FADDR) +#define bfin_write_USB_FADDR(val) bfin_write16(USB_FADDR, val) +#define bfin_read_USB_POWER() bfin_read16(USB_POWER) +#define bfin_write_USB_POWER(val) bfin_write16(USB_POWER, val) +#define bfin_read_USB_INTRTX() bfin_read16(USB_INTRTX) +#define bfin_write_USB_INTRTX(val) bfin_write16(USB_INTRTX, val) +#define bfin_read_USB_INTRRX() bfin_read16(USB_INTRRX) +#define bfin_write_USB_INTRRX(val) bfin_write16(USB_INTRRX, val) +#define bfin_read_USB_INTRTXE() bfin_read16(USB_INTRTXE) +#define bfin_write_USB_INTRTXE(val) bfin_write16(USB_INTRTXE, val) +#define bfin_read_USB_INTRRXE() bfin_read16(USB_INTRRXE) +#define bfin_write_USB_INTRRXE(val) bfin_write16(USB_INTRRXE, val) +#define bfin_read_USB_INTRUSB() bfin_read16(USB_INTRUSB) +#define bfin_write_USB_INTRUSB(val) bfin_write16(USB_INTRUSB, val) +#define bfin_read_USB_INTRUSBE() bfin_read16(USB_INTRUSBE) +#define bfin_write_USB_INTRUSBE(val) bfin_write16(USB_INTRUSBE, val) +#define bfin_read_USB_FRAME() bfin_read16(USB_FRAME) +#define bfin_write_USB_FRAME(val) bfin_write16(USB_FRAME, val) +#define bfin_read_USB_INDEX() bfin_read16(USB_INDEX) +#define bfin_write_USB_INDEX(val) bfin_write16(USB_INDEX, val) +#define bfin_read_USB_TESTMODE() bfin_read16(USB_TESTMODE) +#define bfin_write_USB_TESTMODE(val) bfin_write16(USB_TESTMODE, val) +#define bfin_read_USB_GLOBINTR() bfin_read16(USB_GLOBINTR) +#define bfin_write_USB_GLOBINTR(val) bfin_write16(USB_GLOBINTR, val) +#define bfin_read_USB_GLOBAL_CTL() bfin_read16(USB_GLOBAL_CTL) +#define bfin_write_USB_GLOBAL_CTL(val) bfin_write16(USB_GLOBAL_CTL, val) + +/* USB Packet Control Registers */ + +#define bfin_read_USB_TX_MAX_PACKET() bfin_read16(USB_TX_MAX_PACKET) +#define bfin_write_USB_TX_MAX_PACKET(val) bfin_write16(USB_TX_MAX_PACKET, val) +#define bfin_read_USB_CSR0() bfin_read16(USB_CSR0) +#define bfin_write_USB_CSR0(val) bfin_write16(USB_CSR0, val) +#define bfin_read_USB_TXCSR() bfin_read16(USB_TXCSR) +#define bfin_write_USB_TXCSR(val) bfin_write16(USB_TXCSR, val) +#define bfin_read_USB_RX_MAX_PACKET() bfin_read16(USB_RX_MAX_PACKET) +#define bfin_write_USB_RX_MAX_PACKET(val) bfin_write16(USB_RX_MAX_PACKET, val) +#define bfin_read_USB_RXCSR() bfin_read16(USB_RXCSR) +#define bfin_write_USB_RXCSR(val) bfin_write16(USB_RXCSR, val) +#define bfin_read_USB_COUNT0() bfin_read16(USB_COUNT0) +#define bfin_write_USB_COUNT0(val) bfin_write16(USB_COUNT0, val) +#define bfin_read_USB_RXCOUNT() bfin_read16(USB_RXCOUNT) +#define bfin_write_USB_RXCOUNT(val) bfin_write16(USB_RXCOUNT, val) +#define bfin_read_USB_TXTYPE() bfin_read16(USB_TXTYPE) +#define bfin_write_USB_TXTYPE(val) bfin_write16(USB_TXTYPE, val) +#define bfin_read_USB_NAKLIMIT0() bfin_read16(USB_NAKLIMIT0) +#define bfin_write_USB_NAKLIMIT0(val) bfin_write16(USB_NAKLIMIT0, val) +#define bfin_read_USB_TXINTERVAL() bfin_read16(USB_TXINTERVAL) +#define bfin_write_USB_TXINTERVAL(val) bfin_write16(USB_TXINTERVAL, val) +#define bfin_read_USB_RXTYPE() bfin_read16(USB_RXTYPE) +#define bfin_write_USB_RXTYPE(val) bfin_write16(USB_RXTYPE, val) +#define bfin_read_USB_RXINTERVAL() bfin_read16(USB_RXINTERVAL) +#define bfin_write_USB_RXINTERVAL(val) bfin_write16(USB_RXINTERVAL, val) +#define bfin_read_USB_TXCOUNT() bfin_read16(USB_TXCOUNT) +#define bfin_write_USB_TXCOUNT(val) bfin_write16(USB_TXCOUNT, val) + +/* USB Endpoint FIFO Registers */ + +#define bfin_read_USB_EP0_FIFO() bfin_read16(USB_EP0_FIFO) +#define bfin_write_USB_EP0_FIFO(val) bfin_write16(USB_EP0_FIFO, val) +#define bfin_read_USB_EP1_FIFO() bfin_read16(USB_EP1_FIFO) +#define bfin_write_USB_EP1_FIFO(val) bfin_write16(USB_EP1_FIFO, val) +#define bfin_read_USB_EP2_FIFO() bfin_read16(USB_EP2_FIFO) +#define bfin_write_USB_EP2_FIFO(val) bfin_write16(USB_EP2_FIFO, val) +#define bfin_read_USB_EP3_FIFO() bfin_read16(USB_EP3_FIFO) +#define bfin_write_USB_EP3_FIFO(val) bfin_write16(USB_EP3_FIFO, val) +#define bfin_read_USB_EP4_FIFO() bfin_read16(USB_EP4_FIFO) +#define bfin_write_USB_EP4_FIFO(val) bfin_write16(USB_EP4_FIFO, val) +#define bfin_read_USB_EP5_FIFO() bfin_read16(USB_EP5_FIFO) +#define bfin_write_USB_EP5_FIFO(val) bfin_write16(USB_EP5_FIFO, val) +#define bfin_read_USB_EP6_FIFO() bfin_read16(USB_EP6_FIFO) +#define bfin_write_USB_EP6_FIFO(val) bfin_write16(USB_EP6_FIFO, val) +#define bfin_read_USB_EP7_FIFO() bfin_read16(USB_EP7_FIFO) +#define bfin_write_USB_EP7_FIFO(val) bfin_write16(USB_EP7_FIFO, val) + +/* USB OTG Control Registers */ + +#define bfin_read_USB_OTG_DEV_CTL() bfin_read16(USB_OTG_DEV_CTL) +#define bfin_write_USB_OTG_DEV_CTL(val) bfin_write16(USB_OTG_DEV_CTL, val) +#define bfin_read_USB_OTG_VBUS_IRQ() bfin_read16(USB_OTG_VBUS_IRQ) +#define bfin_write_USB_OTG_VBUS_IRQ(val) bfin_write16(USB_OTG_VBUS_IRQ, val) +#define bfin_read_USB_OTG_VBUS_MASK() bfin_read16(USB_OTG_VBUS_MASK) +#define bfin_write_USB_OTG_VBUS_MASK(val) bfin_write16(USB_OTG_VBUS_MASK, val) + +/* USB Phy Control Registers */ + +#define bfin_read_USB_LINKINFO() bfin_read16(USB_LINKINFO) +#define bfin_write_USB_LINKINFO(val) bfin_write16(USB_LINKINFO, val) +#define bfin_read_USB_VPLEN() bfin_read16(USB_VPLEN) +#define bfin_write_USB_VPLEN(val) bfin_write16(USB_VPLEN, val) +#define bfin_read_USB_HS_EOF1() bfin_read16(USB_HS_EOF1) +#define bfin_write_USB_HS_EOF1(val) bfin_write16(USB_HS_EOF1, val) +#define bfin_read_USB_FS_EOF1() bfin_read16(USB_FS_EOF1) +#define bfin_write_USB_FS_EOF1(val) bfin_write16(USB_FS_EOF1, val) +#define bfin_read_USB_LS_EOF1() bfin_read16(USB_LS_EOF1) +#define bfin_write_USB_LS_EOF1(val) bfin_write16(USB_LS_EOF1, val) + +/* (APHY_CNTRL is for ADI usage only) */ + +#define bfin_read_USB_APHY_CNTRL() bfin_read16(USB_APHY_CNTRL) +#define bfin_write_USB_APHY_CNTRL(val) bfin_write16(USB_APHY_CNTRL, val) + +/* (APHY_CALIB is for ADI usage only) */ + +#define bfin_read_USB_APHY_CALIB() bfin_read16(USB_APHY_CALIB) +#define bfin_write_USB_APHY_CALIB(val) bfin_write16(USB_APHY_CALIB, val) + +#define bfin_read_USB_APHY_CNTRL2() bfin_read16(USB_APHY_CNTRL2) +#define bfin_write_USB_APHY_CNTRL2(val) bfin_write16(USB_APHY_CNTRL2, val) + +/* (PHY_TEST is for ADI usage only) */ + +#define bfin_read_USB_PHY_TEST() bfin_read16(USB_PHY_TEST) +#define bfin_write_USB_PHY_TEST(val) bfin_write16(USB_PHY_TEST, val) + +#define bfin_read_USB_PLLOSC_CTRL() bfin_read16(USB_PLLOSC_CTRL) +#define bfin_write_USB_PLLOSC_CTRL(val) bfin_write16(USB_PLLOSC_CTRL, val) +#define bfin_read_USB_SRP_CLKDIV() bfin_read16(USB_SRP_CLKDIV) +#define bfin_write_USB_SRP_CLKDIV(val) bfin_write16(USB_SRP_CLKDIV, val) + +/* USB Endpoint 0 Control Registers */ + +#define bfin_read_USB_EP_NI0_TXMAXP() bfin_read16(USB_EP_NI0_TXMAXP) +#define bfin_write_USB_EP_NI0_TXMAXP(val) bfin_write16(USB_EP_NI0_TXMAXP, val) +#define bfin_read_USB_EP_NI0_TXCSR() bfin_read16(USB_EP_NI0_TXCSR) +#define bfin_write_USB_EP_NI0_TXCSR(val) bfin_write16(USB_EP_NI0_TXCSR, val) +#define bfin_read_USB_EP_NI0_RXMAXP() bfin_read16(USB_EP_NI0_RXMAXP) +#define bfin_write_USB_EP_NI0_RXMAXP(val) bfin_write16(USB_EP_NI0_RXMAXP, val) +#define bfin_read_USB_EP_NI0_RXCSR() bfin_read16(USB_EP_NI0_RXCSR) +#define bfin_write_USB_EP_NI0_RXCSR(val) bfin_write16(USB_EP_NI0_RXCSR, val) +#define bfin_read_USB_EP_NI0_RXCOUNT() bfin_read16(USB_EP_NI0_RXCOUNT) +#define bfin_write_USB_EP_NI0_RXCOUNT(val) bfin_write16(USB_EP_NI0_RXCOUNT, val) +#define bfin_read_USB_EP_NI0_TXTYPE() bfin_read16(USB_EP_NI0_TXTYPE) +#define bfin_write_USB_EP_NI0_TXTYPE(val) bfin_write16(USB_EP_NI0_TXTYPE, val) +#define bfin_read_USB_EP_NI0_TXINTERVAL() bfin_read16(USB_EP_NI0_TXINTERVAL) +#define bfin_write_USB_EP_NI0_TXINTERVAL(val) bfin_write16(USB_EP_NI0_TXINTERVAL, val) +#define bfin_read_USB_EP_NI0_RXTYPE() bfin_read16(USB_EP_NI0_RXTYPE) +#define bfin_write_USB_EP_NI0_RXTYPE(val) bfin_write16(USB_EP_NI0_RXTYPE, val) +#define bfin_read_USB_EP_NI0_RXINTERVAL() bfin_read16(USB_EP_NI0_RXINTERVAL) +#define bfin_write_USB_EP_NI0_RXINTERVAL(val) bfin_write16(USB_EP_NI0_RXINTERVAL, val) +#define bfin_read_USB_EP_NI0_TXCOUNT() bfin_read16(USB_EP_NI0_TXCOUNT) +#define bfin_write_USB_EP_NI0_TXCOUNT(val) bfin_write16(USB_EP_NI0_TXCOUNT, val) + +/* USB Endpoint 1 Control Registers */ + +#define bfin_read_USB_EP_NI1_TXMAXP() bfin_read16(USB_EP_NI1_TXMAXP) +#define bfin_write_USB_EP_NI1_TXMAXP(val) bfin_write16(USB_EP_NI1_TXMAXP, val) +#define bfin_read_USB_EP_NI1_TXCSR() bfin_read16(USB_EP_NI1_TXCSR) +#define bfin_write_USB_EP_NI1_TXCSR(val) bfin_write16(USB_EP_NI1_TXCSR, val) +#define bfin_read_USB_EP_NI1_RXMAXP() bfin_read16(USB_EP_NI1_RXMAXP) +#define bfin_write_USB_EP_NI1_RXMAXP(val) bfin_write16(USB_EP_NI1_RXMAXP, val) +#define bfin_read_USB_EP_NI1_RXCSR() bfin_read16(USB_EP_NI1_RXCSR) +#define bfin_write_USB_EP_NI1_RXCSR(val) bfin_write16(USB_EP_NI1_RXCSR, val) +#define bfin_read_USB_EP_NI1_RXCOUNT() bfin_read16(USB_EP_NI1_RXCOUNT) +#define bfin_write_USB_EP_NI1_RXCOUNT(val) bfin_write16(USB_EP_NI1_RXCOUNT, val) +#define bfin_read_USB_EP_NI1_TXTYPE() bfin_read16(USB_EP_NI1_TXTYPE) +#define bfin_write_USB_EP_NI1_TXTYPE(val) bfin_write16(USB_EP_NI1_TXTYPE, val) +#define bfin_read_USB_EP_NI1_TXINTERVAL() bfin_read16(USB_EP_NI1_TXINTERVAL) +#define bfin_write_USB_EP_NI1_TXINTERVAL(val) bfin_write16(USB_EP_NI1_TXINTERVAL, val) +#define bfin_read_USB_EP_NI1_RXTYPE() bfin_read16(USB_EP_NI1_RXTYPE) +#define bfin_write_USB_EP_NI1_RXTYPE(val) bfin_write16(USB_EP_NI1_RXTYPE, val) +#define bfin_read_USB_EP_NI1_RXINTERVAL() bfin_read16(USB_EP_NI1_RXINTERVAL) +#define bfin_write_USB_EP_NI1_RXINTERVAL(val) bfin_write16(USB_EP_NI1_RXINTERVAL, val) +#define bfin_read_USB_EP_NI1_TXCOUNT() bfin_read16(USB_EP_NI1_TXCOUNT) +#define bfin_write_USB_EP_NI1_TXCOUNT(val) bfin_write16(USB_EP_NI1_TXCOUNT, val) + +/* USB Endpoint 2 Control Registers */ + +#define bfin_read_USB_EP_NI2_TXMAXP() bfin_read16(USB_EP_NI2_TXMAXP) +#define bfin_write_USB_EP_NI2_TXMAXP(val) bfin_write16(USB_EP_NI2_TXMAXP, val) +#define bfin_read_USB_EP_NI2_TXCSR() bfin_read16(USB_EP_NI2_TXCSR) +#define bfin_write_USB_EP_NI2_TXCSR(val) bfin_write16(USB_EP_NI2_TXCSR, val) +#define bfin_read_USB_EP_NI2_RXMAXP() bfin_read16(USB_EP_NI2_RXMAXP) +#define bfin_write_USB_EP_NI2_RXMAXP(val) bfin_write16(USB_EP_NI2_RXMAXP, val) +#define bfin_read_USB_EP_NI2_RXCSR() bfin_read16(USB_EP_NI2_RXCSR) +#define bfin_write_USB_EP_NI2_RXCSR(val) bfin_write16(USB_EP_NI2_RXCSR, val) +#define bfin_read_USB_EP_NI2_RXCOUNT() bfin_read16(USB_EP_NI2_RXCOUNT) +#define bfin_write_USB_EP_NI2_RXCOUNT(val) bfin_write16(USB_EP_NI2_RXCOUNT, val) +#define bfin_read_USB_EP_NI2_TXTYPE() bfin_read16(USB_EP_NI2_TXTYPE) +#define bfin_write_USB_EP_NI2_TXTYPE(val) bfin_write16(USB_EP_NI2_TXTYPE, val) +#define bfin_read_USB_EP_NI2_TXINTERVAL() bfin_read16(USB_EP_NI2_TXINTERVAL) +#define bfin_write_USB_EP_NI2_TXINTERVAL(val) bfin_write16(USB_EP_NI2_TXINTERVAL, val) +#define bfin_read_USB_EP_NI2_RXTYPE() bfin_read16(USB_EP_NI2_RXTYPE) +#define bfin_write_USB_EP_NI2_RXTYPE(val) bfin_write16(USB_EP_NI2_RXTYPE, val) +#define bfin_read_USB_EP_NI2_RXINTERVAL() bfin_read16(USB_EP_NI2_RXINTERVAL) +#define bfin_write_USB_EP_NI2_RXINTERVAL(val) bfin_write16(USB_EP_NI2_RXINTERVAL, val) +#define bfin_read_USB_EP_NI2_TXCOUNT() bfin_read16(USB_EP_NI2_TXCOUNT) +#define bfin_write_USB_EP_NI2_TXCOUNT(val) bfin_write16(USB_EP_NI2_TXCOUNT, val) + +/* USB Endpoint 3 Control Registers */ + +#define bfin_read_USB_EP_NI3_TXMAXP() bfin_read16(USB_EP_NI3_TXMAXP) +#define bfin_write_USB_EP_NI3_TXMAXP(val) bfin_write16(USB_EP_NI3_TXMAXP, val) +#define bfin_read_USB_EP_NI3_TXCSR() bfin_read16(USB_EP_NI3_TXCSR) +#define bfin_write_USB_EP_NI3_TXCSR(val) bfin_write16(USB_EP_NI3_TXCSR, val) +#define bfin_read_USB_EP_NI3_RXMAXP() bfin_read16(USB_EP_NI3_RXMAXP) +#define bfin_write_USB_EP_NI3_RXMAXP(val) bfin_write16(USB_EP_NI3_RXMAXP, val) +#define bfin_read_USB_EP_NI3_RXCSR() bfin_read16(USB_EP_NI3_RXCSR) +#define bfin_write_USB_EP_NI3_RXCSR(val) bfin_write16(USB_EP_NI3_RXCSR, val) +#define bfin_read_USB_EP_NI3_RXCOUNT() bfin_read16(USB_EP_NI3_RXCOUNT) +#define bfin_write_USB_EP_NI3_RXCOUNT(val) bfin_write16(USB_EP_NI3_RXCOUNT, val) +#define bfin_read_USB_EP_NI3_TXTYPE() bfin_read16(USB_EP_NI3_TXTYPE) +#define bfin_write_USB_EP_NI3_TXTYPE(val) bfin_write16(USB_EP_NI3_TXTYPE, val) +#define bfin_read_USB_EP_NI3_TXINTERVAL() bfin_read16(USB_EP_NI3_TXINTERVAL) +#define bfin_write_USB_EP_NI3_TXINTERVAL(val) bfin_write16(USB_EP_NI3_TXINTERVAL, val) +#define bfin_read_USB_EP_NI3_RXTYPE() bfin_read16(USB_EP_NI3_RXTYPE) +#define bfin_write_USB_EP_NI3_RXTYPE(val) bfin_write16(USB_EP_NI3_RXTYPE, val) +#define bfin_read_USB_EP_NI3_RXINTERVAL() bfin_read16(USB_EP_NI3_RXINTERVAL) +#define bfin_write_USB_EP_NI3_RXINTERVAL(val) bfin_write16(USB_EP_NI3_RXINTERVAL, val) +#define bfin_read_USB_EP_NI3_TXCOUNT() bfin_read16(USB_EP_NI3_TXCOUNT) +#define bfin_write_USB_EP_NI3_TXCOUNT(val) bfin_write16(USB_EP_NI3_TXCOUNT, val) + +/* USB Endpoint 4 Control Registers */ + +#define bfin_read_USB_EP_NI4_TXMAXP() bfin_read16(USB_EP_NI4_TXMAXP) +#define bfin_write_USB_EP_NI4_TXMAXP(val) bfin_write16(USB_EP_NI4_TXMAXP, val) +#define bfin_read_USB_EP_NI4_TXCSR() bfin_read16(USB_EP_NI4_TXCSR) +#define bfin_write_USB_EP_NI4_TXCSR(val) bfin_write16(USB_EP_NI4_TXCSR, val) +#define bfin_read_USB_EP_NI4_RXMAXP() bfin_read16(USB_EP_NI4_RXMAXP) +#define bfin_write_USB_EP_NI4_RXMAXP(val) bfin_write16(USB_EP_NI4_RXMAXP, val) +#define bfin_read_USB_EP_NI4_RXCSR() bfin_read16(USB_EP_NI4_RXCSR) +#define bfin_write_USB_EP_NI4_RXCSR(val) bfin_write16(USB_EP_NI4_RXCSR, val) +#define bfin_read_USB_EP_NI4_RXCOUNT() bfin_read16(USB_EP_NI4_RXCOUNT) +#define bfin_write_USB_EP_NI4_RXCOUNT(val) bfin_write16(USB_EP_NI4_RXCOUNT, val) +#define bfin_read_USB_EP_NI4_TXTYPE() bfin_read16(USB_EP_NI4_TXTYPE) +#define bfin_write_USB_EP_NI4_TXTYPE(val) bfin_write16(USB_EP_NI4_TXTYPE, val) +#define bfin_read_USB_EP_NI4_TXINTERVAL() bfin_read16(USB_EP_NI4_TXINTERVAL) +#define bfin_write_USB_EP_NI4_TXINTERVAL(val) bfin_write16(USB_EP_NI4_TXINTERVAL, val) +#define bfin_read_USB_EP_NI4_RXTYPE() bfin_read16(USB_EP_NI4_RXTYPE) +#define bfin_write_USB_EP_NI4_RXTYPE(val) bfin_write16(USB_EP_NI4_RXTYPE, val) +#define bfin_read_USB_EP_NI4_RXINTERVAL() bfin_read16(USB_EP_NI4_RXINTERVAL) +#define bfin_write_USB_EP_NI4_RXINTERVAL(val) bfin_write16(USB_EP_NI4_RXINTERVAL, val) +#define bfin_read_USB_EP_NI4_TXCOUNT() bfin_read16(USB_EP_NI4_TXCOUNT) +#define bfin_write_USB_EP_NI4_TXCOUNT(val) bfin_write16(USB_EP_NI4_TXCOUNT, val) + +/* USB Endpoint 5 Control Registers */ + +#define bfin_read_USB_EP_NI5_TXMAXP() bfin_read16(USB_EP_NI5_TXMAXP) +#define bfin_write_USB_EP_NI5_TXMAXP(val) bfin_write16(USB_EP_NI5_TXMAXP, val) +#define bfin_read_USB_EP_NI5_TXCSR() bfin_read16(USB_EP_NI5_TXCSR) +#define bfin_write_USB_EP_NI5_TXCSR(val) bfin_write16(USB_EP_NI5_TXCSR, val) +#define bfin_read_USB_EP_NI5_RXMAXP() bfin_read16(USB_EP_NI5_RXMAXP) +#define bfin_write_USB_EP_NI5_RXMAXP(val) bfin_write16(USB_EP_NI5_RXMAXP, val) +#define bfin_read_USB_EP_NI5_RXCSR() bfin_read16(USB_EP_NI5_RXCSR) +#define bfin_write_USB_EP_NI5_RXCSR(val) bfin_write16(USB_EP_NI5_RXCSR, val) +#define bfin_read_USB_EP_NI5_RXCOUNT() bfin_read16(USB_EP_NI5_RXCOUNT) +#define bfin_write_USB_EP_NI5_RXCOUNT(val) bfin_write16(USB_EP_NI5_RXCOUNT, val) +#define bfin_read_USB_EP_NI5_TXTYPE() bfin_read16(USB_EP_NI5_TXTYPE) +#define bfin_write_USB_EP_NI5_TXTYPE(val) bfin_write16(USB_EP_NI5_TXTYPE, val) +#define bfin_read_USB_EP_NI5_TXINTERVAL() bfin_read16(USB_EP_NI5_TXINTERVAL) +#define bfin_write_USB_EP_NI5_TXINTERVAL(val) bfin_write16(USB_EP_NI5_TXINTERVAL, val) +#define bfin_read_USB_EP_NI5_RXTYPE() bfin_read16(USB_EP_NI5_RXTYPE) +#define bfin_write_USB_EP_NI5_RXTYPE(val) bfin_write16(USB_EP_NI5_RXTYPE, val) +#define bfin_read_USB_EP_NI5_RXINTERVAL() bfin_read16(USB_EP_NI5_RXINTERVAL) +#define bfin_write_USB_EP_NI5_RXINTERVAL(val) bfin_write16(USB_EP_NI5_RXINTERVAL, val) +#define bfin_read_USB_EP_NI5_TXCOUNT() bfin_read16(USB_EP_NI5_TXCOUNT) +#define bfin_write_USB_EP_NI5_TXCOUNT(val) bfin_write16(USB_EP_NI5_TXCOUNT, val) + +/* USB Endpoint 6 Control Registers */ + +#define bfin_read_USB_EP_NI6_TXMAXP() bfin_read16(USB_EP_NI6_TXMAXP) +#define bfin_write_USB_EP_NI6_TXMAXP(val) bfin_write16(USB_EP_NI6_TXMAXP, val) +#define bfin_read_USB_EP_NI6_TXCSR() bfin_read16(USB_EP_NI6_TXCSR) +#define bfin_write_USB_EP_NI6_TXCSR(val) bfin_write16(USB_EP_NI6_TXCSR, val) +#define bfin_read_USB_EP_NI6_RXMAXP() bfin_read16(USB_EP_NI6_RXMAXP) +#define bfin_write_USB_EP_NI6_RXMAXP(val) bfin_write16(USB_EP_NI6_RXMAXP, val) +#define bfin_read_USB_EP_NI6_RXCSR() bfin_read16(USB_EP_NI6_RXCSR) +#define bfin_write_USB_EP_NI6_RXCSR(val) bfin_write16(USB_EP_NI6_RXCSR, val) +#define bfin_read_USB_EP_NI6_RXCOUNT() bfin_read16(USB_EP_NI6_RXCOUNT) +#define bfin_write_USB_EP_NI6_RXCOUNT(val) bfin_write16(USB_EP_NI6_RXCOUNT, val) +#define bfin_read_USB_EP_NI6_TXTYPE() bfin_read16(USB_EP_NI6_TXTYPE) +#define bfin_write_USB_EP_NI6_TXTYPE(val) bfin_write16(USB_EP_NI6_TXTYPE, val) +#define bfin_read_USB_EP_NI6_TXINTERVAL() bfin_read16(USB_EP_NI6_TXINTERVAL) +#define bfin_write_USB_EP_NI6_TXINTERVAL(val) bfin_write16(USB_EP_NI6_TXINTERVAL, val) +#define bfin_read_USB_EP_NI6_RXTYPE() bfin_read16(USB_EP_NI6_RXTYPE) +#define bfin_write_USB_EP_NI6_RXTYPE(val) bfin_write16(USB_EP_NI6_RXTYPE, val) +#define bfin_read_USB_EP_NI6_RXINTERVAL() bfin_read16(USB_EP_NI6_RXINTERVAL) +#define bfin_write_USB_EP_NI6_RXINTERVAL(val) bfin_write16(USB_EP_NI6_RXINTERVAL, val) +#define bfin_read_USB_EP_NI6_TXCOUNT() bfin_read16(USB_EP_NI6_TXCOUNT) +#define bfin_write_USB_EP_NI6_TXCOUNT(val) bfin_write16(USB_EP_NI6_TXCOUNT, val) + +/* USB Endpoint 7 Control Registers */ + +#define bfin_read_USB_EP_NI7_TXMAXP() bfin_read16(USB_EP_NI7_TXMAXP) +#define bfin_write_USB_EP_NI7_TXMAXP(val) bfin_write16(USB_EP_NI7_TXMAXP, val) +#define bfin_read_USB_EP_NI7_TXCSR() bfin_read16(USB_EP_NI7_TXCSR) +#define bfin_write_USB_EP_NI7_TXCSR(val) bfin_write16(USB_EP_NI7_TXCSR, val) +#define bfin_read_USB_EP_NI7_RXMAXP() bfin_read16(USB_EP_NI7_RXMAXP) +#define bfin_write_USB_EP_NI7_RXMAXP(val) bfin_write16(USB_EP_NI7_RXMAXP, val) +#define bfin_read_USB_EP_NI7_RXCSR() bfin_read16(USB_EP_NI7_RXCSR) +#define bfin_write_USB_EP_NI7_RXCSR(val) bfin_write16(USB_EP_NI7_RXCSR, val) +#define bfin_read_USB_EP_NI7_RXCOUNT() bfin_read16(USB_EP_NI7_RXCOUNT) +#define bfin_write_USB_EP_NI7_RXCOUNT(val) bfin_write16(USB_EP_NI7_RXCOUNT, val) +#define bfin_read_USB_EP_NI7_TXTYPE() bfin_read16(USB_EP_NI7_TXTYPE) +#define bfin_write_USB_EP_NI7_TXTYPE(val) bfin_write16(USB_EP_NI7_TXTYPE, val) +#define bfin_read_USB_EP_NI7_TXINTERVAL() bfin_read16(USB_EP_NI7_TXINTERVAL) +#define bfin_write_USB_EP_NI7_TXINTERVAL(val) bfin_write16(USB_EP_NI7_TXINTERVAL, val) +#define bfin_read_USB_EP_NI7_RXTYPE() bfin_read16(USB_EP_NI7_RXTYPE) +#define bfin_write_USB_EP_NI7_RXTYPE(val) bfin_write16(USB_EP_NI7_RXTYPE, val) +#define bfin_read_USB_EP_NI7_RXINTERVAL() bfin_read16(USB_EP_NI7_RXINTERVAL) +#define bfin_write_USB_EP_NI7_RXINTERVAL(val) bfin_write16(USB_EP_NI7_RXINTERVAL, val) +#define bfin_read_USB_EP_NI7_TXCOUNT() bfin_read16(USB_EP_NI7_TXCOUNT) +#define bfin_write_USB_EP_NI7_TXCOUNT(val) bfin_write16(USB_EP_NI7_TXCOUNT, val) + +#define bfin_read_USB_DMA_INTERRUPT() bfin_read16(USB_DMA_INTERRUPT) +#define bfin_write_USB_DMA_INTERRUPT(val) bfin_write16(USB_DMA_INTERRUPT, val) + +/* USB Channel 0 Config Registers */ + +#define bfin_read_USB_DMA0CONTROL() bfin_read16(USB_DMA0CONTROL) +#define bfin_write_USB_DMA0CONTROL(val) bfin_write16(USB_DMA0CONTROL, val) +#define bfin_read_USB_DMA0ADDRLOW() bfin_read16(USB_DMA0ADDRLOW) +#define bfin_write_USB_DMA0ADDRLOW(val) bfin_write16(USB_DMA0ADDRLOW, val) +#define bfin_read_USB_DMA0ADDRHIGH() bfin_read16(USB_DMA0ADDRHIGH) +#define bfin_write_USB_DMA0ADDRHIGH(val) bfin_write16(USB_DMA0ADDRHIGH, val) +#define bfin_read_USB_DMA0COUNTLOW() bfin_read16(USB_DMA0COUNTLOW) +#define bfin_write_USB_DMA0COUNTLOW(val) bfin_write16(USB_DMA0COUNTLOW, val) +#define bfin_read_USB_DMA0COUNTHIGH() bfin_read16(USB_DMA0COUNTHIGH) +#define bfin_write_USB_DMA0COUNTHIGH(val) bfin_write16(USB_DMA0COUNTHIGH, val) + +/* USB Channel 1 Config Registers */ + +#define bfin_read_USB_DMA1CONTROL() bfin_read16(USB_DMA1CONTROL) +#define bfin_write_USB_DMA1CONTROL(val) bfin_write16(USB_DMA1CONTROL, val) +#define bfin_read_USB_DMA1ADDRLOW() bfin_read16(USB_DMA1ADDRLOW) +#define bfin_write_USB_DMA1ADDRLOW(val) bfin_write16(USB_DMA1ADDRLOW, val) +#define bfin_read_USB_DMA1ADDRHIGH() bfin_read16(USB_DMA1ADDRHIGH) +#define bfin_write_USB_DMA1ADDRHIGH(val) bfin_write16(USB_DMA1ADDRHIGH, val) +#define bfin_read_USB_DMA1COUNTLOW() bfin_read16(USB_DMA1COUNTLOW) +#define bfin_write_USB_DMA1COUNTLOW(val) bfin_write16(USB_DMA1COUNTLOW, val) +#define bfin_read_USB_DMA1COUNTHIGH() bfin_read16(USB_DMA1COUNTHIGH) +#define bfin_write_USB_DMA1COUNTHIGH(val) bfin_write16(USB_DMA1COUNTHIGH, val) + +/* USB Channel 2 Config Registers */ + +#define bfin_read_USB_DMA2CONTROL() bfin_read16(USB_DMA2CONTROL) +#define bfin_write_USB_DMA2CONTROL(val) bfin_write16(USB_DMA2CONTROL, val) +#define bfin_read_USB_DMA2ADDRLOW() bfin_read16(USB_DMA2ADDRLOW) +#define bfin_write_USB_DMA2ADDRLOW(val) bfin_write16(USB_DMA2ADDRLOW, val) +#define bfin_read_USB_DMA2ADDRHIGH() bfin_read16(USB_DMA2ADDRHIGH) +#define bfin_write_USB_DMA2ADDRHIGH(val) bfin_write16(USB_DMA2ADDRHIGH, val) +#define bfin_read_USB_DMA2COUNTLOW() bfin_read16(USB_DMA2COUNTLOW) +#define bfin_write_USB_DMA2COUNTLOW(val) bfin_write16(USB_DMA2COUNTLOW, val) +#define bfin_read_USB_DMA2COUNTHIGH() bfin_read16(USB_DMA2COUNTHIGH) +#define bfin_write_USB_DMA2COUNTHIGH(val) bfin_write16(USB_DMA2COUNTHIGH, val) + +/* USB Channel 3 Config Registers */ + +#define bfin_read_USB_DMA3CONTROL() bfin_read16(USB_DMA3CONTROL) +#define bfin_write_USB_DMA3CONTROL(val) bfin_write16(USB_DMA3CONTROL, val) +#define bfin_read_USB_DMA3ADDRLOW() bfin_read16(USB_DMA3ADDRLOW) +#define bfin_write_USB_DMA3ADDRLOW(val) bfin_write16(USB_DMA3ADDRLOW, val) +#define bfin_read_USB_DMA3ADDRHIGH() bfin_read16(USB_DMA3ADDRHIGH) +#define bfin_write_USB_DMA3ADDRHIGH(val) bfin_write16(USB_DMA3ADDRHIGH, val) +#define bfin_read_USB_DMA3COUNTLOW() bfin_read16(USB_DMA3COUNTLOW) +#define bfin_write_USB_DMA3COUNTLOW(val) bfin_write16(USB_DMA3COUNTLOW, val) +#define bfin_read_USB_DMA3COUNTHIGH() bfin_read16(USB_DMA3COUNTHIGH) +#define bfin_write_USB_DMA3COUNTHIGH(val) bfin_write16(USB_DMA3COUNTHIGH, val) + +/* USB Channel 4 Config Registers */ + +#define bfin_read_USB_DMA4CONTROL() bfin_read16(USB_DMA4CONTROL) +#define bfin_write_USB_DMA4CONTROL(val) bfin_write16(USB_DMA4CONTROL, val) +#define bfin_read_USB_DMA4ADDRLOW() bfin_read16(USB_DMA4ADDRLOW) +#define bfin_write_USB_DMA4ADDRLOW(val) bfin_write16(USB_DMA4ADDRLOW, val) +#define bfin_read_USB_DMA4ADDRHIGH() bfin_read16(USB_DMA4ADDRHIGH) +#define bfin_write_USB_DMA4ADDRHIGH(val) bfin_write16(USB_DMA4ADDRHIGH, val) +#define bfin_read_USB_DMA4COUNTLOW() bfin_read16(USB_DMA4COUNTLOW) +#define bfin_write_USB_DMA4COUNTLOW(val) bfin_write16(USB_DMA4COUNTLOW, val) +#define bfin_read_USB_DMA4COUNTHIGH() bfin_read16(USB_DMA4COUNTHIGH) +#define bfin_write_USB_DMA4COUNTHIGH(val) bfin_write16(USB_DMA4COUNTHIGH, val) + +/* USB Channel 5 Config Registers */ + +#define bfin_read_USB_DMA5CONTROL() bfin_read16(USB_DMA5CONTROL) +#define bfin_write_USB_DMA5CONTROL(val) bfin_write16(USB_DMA5CONTROL, val) +#define bfin_read_USB_DMA5ADDRLOW() bfin_read16(USB_DMA5ADDRLOW) +#define bfin_write_USB_DMA5ADDRLOW(val) bfin_write16(USB_DMA5ADDRLOW, val) +#define bfin_read_USB_DMA5ADDRHIGH() bfin_read16(USB_DMA5ADDRHIGH) +#define bfin_write_USB_DMA5ADDRHIGH(val) bfin_write16(USB_DMA5ADDRHIGH, val) +#define bfin_read_USB_DMA5COUNTLOW() bfin_read16(USB_DMA5COUNTLOW) +#define bfin_write_USB_DMA5COUNTLOW(val) bfin_write16(USB_DMA5COUNTLOW, val) +#define bfin_read_USB_DMA5COUNTHIGH() bfin_read16(USB_DMA5COUNTHIGH) +#define bfin_write_USB_DMA5COUNTHIGH(val) bfin_write16(USB_DMA5COUNTHIGH, val) + +/* USB Channel 6 Config Registers */ + +#define bfin_read_USB_DMA6CONTROL() bfin_read16(USB_DMA6CONTROL) +#define bfin_write_USB_DMA6CONTROL(val) bfin_write16(USB_DMA6CONTROL, val) +#define bfin_read_USB_DMA6ADDRLOW() bfin_read16(USB_DMA6ADDRLOW) +#define bfin_write_USB_DMA6ADDRLOW(val) bfin_write16(USB_DMA6ADDRLOW, val) +#define bfin_read_USB_DMA6ADDRHIGH() bfin_read16(USB_DMA6ADDRHIGH) +#define bfin_write_USB_DMA6ADDRHIGH(val) bfin_write16(USB_DMA6ADDRHIGH, val) +#define bfin_read_USB_DMA6COUNTLOW() bfin_read16(USB_DMA6COUNTLOW) +#define bfin_write_USB_DMA6COUNTLOW(val) bfin_write16(USB_DMA6COUNTLOW, val) +#define bfin_read_USB_DMA6COUNTHIGH() bfin_read16(USB_DMA6COUNTHIGH) +#define bfin_write_USB_DMA6COUNTHIGH(val) bfin_write16(USB_DMA6COUNTHIGH, val) + +/* USB Channel 7 Config Registers */ + +#define bfin_read_USB_DMA7CONTROL() bfin_read16(USB_DMA7CONTROL) +#define bfin_write_USB_DMA7CONTROL(val) bfin_write16(USB_DMA7CONTROL, val) +#define bfin_read_USB_DMA7ADDRLOW() bfin_read16(USB_DMA7ADDRLOW) +#define bfin_write_USB_DMA7ADDRLOW(val) bfin_write16(USB_DMA7ADDRLOW, val) +#define bfin_read_USB_DMA7ADDRHIGH() bfin_read16(USB_DMA7ADDRHIGH) +#define bfin_write_USB_DMA7ADDRHIGH(val) bfin_write16(USB_DMA7ADDRHIGH, val) +#define bfin_read_USB_DMA7COUNTLOW() bfin_read16(USB_DMA7COUNTLOW) +#define bfin_write_USB_DMA7COUNTLOW(val) bfin_write16(USB_DMA7COUNTLOW, val) +#define bfin_read_USB_DMA7COUNTHIGH() bfin_read16(USB_DMA7COUNTHIGH) +#define bfin_write_USB_DMA7COUNTHIGH(val) bfin_write16(USB_DMA7COUNTHIGH, val) + +#endif /* _CDEF_BF525_H */ diff --git a/include/asm-blackfin/mach-bf527/cdefBF527.h b/include/asm-blackfin/mach-bf527/cdefBF527.h new file mode 100644 index 00000000000000..5bd1a860174368 --- /dev/null +++ b/include/asm-blackfin/mach-bf527/cdefBF527.h @@ -0,0 +1,626 @@ +/* + * File: include/asm-blackfin/mach-bf527/cdefbf527.h + * Based on: + * Author: + * + * Created: + * Description: system mmr register map + * + * Rev: + * + * Modified: + * + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _CDEF_BF527_H +#define _CDEF_BF527_H + +/* include all Core registers and bit definitions */ +#include "defBF527.h" + +/* include core specific register pointer definitions */ +#include <asm/mach-common/cdef_LPBlackfin.h> + +/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF527 */ + +/* include cdefBF52x_base.h for the set of #defines that are common to all ADSP-BF52x processors */ +#include "cdefBF52x_base.h" + +/* The following are the #defines needed by ADSP-BF527 that are not in the common header */ + +/* 10/100 Ethernet Controller (0xFFC03000 - 0xFFC031FF) */ + +#define bfin_read_EMAC_OPMODE() bfin_read32(EMAC_OPMODE) +#define bfin_write_EMAC_OPMODE(val) bfin_write32(EMAC_OPMODE, val) +#define bfin_read_EMAC_ADDRLO() bfin_read32(EMAC_ADDRLO) +#define bfin_write_EMAC_ADDRLO(val) bfin_write32(EMAC_ADDRLO, val) +#define bfin_read_EMAC_ADDRHI() bfin_read32(EMAC_ADDRHI) +#define bfin_write_EMAC_ADDRHI(val) bfin_write32(EMAC_ADDRHI, val) +#define bfin_read_EMAC_HASHLO() bfin_read32(EMAC_HASHLO) +#define bfin_write_EMAC_HASHLO(val) bfin_write32(EMAC_HASHLO, val) +#define bfin_read_EMAC_HASHHI() bfin_read32(EMAC_HASHHI) +#define bfin_write_EMAC_HASHHI(val) bfin_write32(EMAC_HASHHI, val) +#define bfin_read_EMAC_STAADD() bfin_read32(EMAC_STAADD) +#define bfin_write_EMAC_STAADD(val) bfin_write32(EMAC_STAADD, val) +#define bfin_read_EMAC_STADAT() bfin_read32(EMAC_STADAT) +#define bfin_write_EMAC_STADAT(val) bfin_write32(EMAC_STADAT, val) +#define bfin_read_EMAC_FLC() bfin_read32(EMAC_FLC) +#define bfin_write_EMAC_FLC(val) bfin_write32(EMAC_FLC, val) +#define bfin_read_EMAC_VLAN1() bfin_read32(EMAC_VLAN1) +#define bfin_write_EMAC_VLAN1(val) bfin_write32(EMAC_VLAN1, val) +#define bfin_read_EMAC_VLAN2() bfin_read32(EMAC_VLAN2) +#define bfin_write_EMAC_VLAN2(val) bfin_write32(EMAC_VLAN2, val) +#define bfin_read_EMAC_WKUP_CTL() bfin_read32(EMAC_WKUP_CTL) +#define bfin_write_EMAC_WKUP_CTL(val) bfin_write32(EMAC_WKUP_CTL, val) +#define bfin_read_EMAC_WKUP_FFMSK0() bfin_read32(EMAC_WKUP_FFMSK0) +#define bfin_write_EMAC_WKUP_FFMSK0(val) bfin_write32(EMAC_WKUP_FFMSK0, val) +#define bfin_read_EMAC_WKUP_FFMSK1() bfin_read32(EMAC_WKUP_FFMSK1) +#define bfin_write_EMAC_WKUP_FFMSK1(val) bfin_write32(EMAC_WKUP_FFMSK1, val) +#define bfin_read_EMAC_WKUP_FFMSK2() bfin_read32(EMAC_WKUP_FFMSK2) +#define bfin_write_EMAC_WKUP_FFMSK2(val) bfin_write32(EMAC_WKUP_FFMSK2, val) +#define bfin_read_EMAC_WKUP_FFMSK3() bfin_read32(EMAC_WKUP_FFMSK3) +#define bfin_write_EMAC_WKUP_FFMSK3(val) bfin_write32(EMAC_WKUP_FFMSK3, val) +#define bfin_read_EMAC_WKUP_FFCMD() bfin_read32(EMAC_WKUP_FFCMD) +#define bfin_write_EMAC_WKUP_FFCMD(val) bfin_write32(EMAC_WKUP_FFCMD, val) +#define bfin_read_EMAC_WKUP_FFOFF() bfin_read32(EMAC_WKUP_FFOFF) +#define bfin_write_EMAC_WKUP_FFOFF(val) bfin_write32(EMAC_WKUP_FFOFF, val) +#define bfin_read_EMAC_WKUP_FFCRC0() bfin_read32(EMAC_WKUP_FFCRC0) +#define bfin_write_EMAC_WKUP_FFCRC0(val) bfin_write32(EMAC_WKUP_FFCRC0, val) +#define bfin_read_EMAC_WKUP_FFCRC1() bfin_read32(EMAC_WKUP_FFCRC1) +#define bfin_write_EMAC_WKUP_FFCRC1(val) bfin_write32(EMAC_WKUP_FFCRC1, val) + +#define bfin_read_EMAC_SYSCTL() bfin_read32(EMAC_SYSCTL) +#define bfin_write_EMAC_SYSCTL(val) bfin_write32(EMAC_SYSCTL, val) +#define bfin_read_EMAC_SYSTAT() bfin_read32(EMAC_SYSTAT) +#define bfin_write_EMAC_SYSTAT(val) bfin_write32(EMAC_SYSTAT, val) +#define bfin_read_EMAC_RX_STAT() bfin_read32(EMAC_RX_STAT) +#define bfin_write_EMAC_RX_STAT(val) bfin_write32(EMAC_RX_STAT, val) +#define bfin_read_EMAC_RX_STKY() bfin_read32(EMAC_RX_STKY) +#define bfin_write_EMAC_RX_STKY(val) bfin_write32(EMAC_RX_STKY, val) +#define bfin_read_EMAC_RX_IRQE() bfin_read32(EMAC_RX_IRQE) +#define bfin_write_EMAC_RX_IRQE(val) bfin_write32(EMAC_RX_IRQE, val) +#define bfin_read_EMAC_TX_STAT() bfin_read32(EMAC_TX_STAT) +#define bfin_write_EMAC_TX_STAT(val) bfin_write32(EMAC_TX_STAT, val) +#define bfin_read_EMAC_TX_STKY() bfin_read32(EMAC_TX_STKY) +#define bfin_write_EMAC_TX_STKY(val) bfin_write32(EMAC_TX_STKY, val) +#define bfin_read_EMAC_TX_IRQE() bfin_read32(EMAC_TX_IRQE) +#define bfin_write_EMAC_TX_IRQE(val) bfin_write32(EMAC_TX_IRQE, val) + +#define bfin_read_EMAC_MMC_CTL() bfin_read32(EMAC_MMC_CTL) +#define bfin_write_EMAC_MMC_CTL(val) bfin_write32(EMAC_MMC_CTL, val) +#define bfin_read_EMAC_MMC_RIRQS() bfin_read32(EMAC_MMC_RIRQS) +#define bfin_write_EMAC_MMC_RIRQS(val) bfin_write32(EMAC_MMC_RIRQS, val) +#define bfin_read_EMAC_MMC_RIRQE() bfin_read32(EMAC_MMC_RIRQE) +#define bfin_write_EMAC_MMC_RIRQE(val) bfin_write32(EMAC_MMC_RIRQE, val) +#define bfin_read_EMAC_MMC_TIRQS() bfin_read32(EMAC_MMC_TIRQS) +#define bfin_write_EMAC_MMC_TIRQS(val) bfin_write32(EMAC_MMC_TIRQS, val) +#define bfin_read_EMAC_MMC_TIRQE() bfin_read32(EMAC_MMC_TIRQE) +#define bfin_write_EMAC_MMC_TIRQE(val) bfin_write32(EMAC_MMC_TIRQE, val) + +#define bfin_read_EMAC_RXC_OK() bfin_read32(EMAC_RXC_OK) +#define bfin_write_EMAC_RXC_OK(val) bfin_write32(EMAC_RXC_OK, val) +#define bfin_read_EMAC_RXC_FCS() bfin_read32(EMAC_RXC_FCS) +#define bfin_write_EMAC_RXC_FCS(val) bfin_write32(EMAC_RXC_FCS, val) +#define bfin_read_EMAC_RXC_ALIGN() bfin_read32(EMAC_RXC_ALIGN) +#define bfin_write_EMAC_RXC_ALIGN(val) bfin_write32(EMAC_RXC_ALIGN, val) +#define bfin_read_EMAC_RXC_OCTET() bfin_read32(EMAC_RXC_OCTET) +#define bfin_write_EMAC_RXC_OCTET(val) bfin_write32(EMAC_RXC_OCTET, val) +#define bfin_read_EMAC_RXC_DMAOVF() bfin_read32(EMAC_RXC_DMAOVF) +#define bfin_write_EMAC_RXC_DMAOVF(val) bfin_write32(EMAC_RXC_DMAOVF, val) +#define bfin_read_EMAC_RXC_UNICST() bfin_read32(EMAC_RXC_UNICST) +#define bfin_write_EMAC_RXC_UNICST(val) bfin_write32(EMAC_RXC_UNICST, val) +#define bfin_read_EMAC_RXC_MULTI() bfin_read32(EMAC_RXC_MULTI) +#define bfin_write_EMAC_RXC_MULTI(val) bfin_write32(EMAC_RXC_MULTI, val) +#define bfin_read_EMAC_RXC_BROAD() bfin_read32(EMAC_RXC_BROAD) +#define bfin_write_EMAC_RXC_BROAD(val) bfin_write32(EMAC_RXC_BROAD, val) +#define bfin_read_EMAC_RXC_LNERRI() bfin_read32(EMAC_RXC_LNERRI) +#define bfin_write_EMAC_RXC_LNERRI(val) bfin_write32(EMAC_RXC_LNERRI, val) +#define bfin_read_EMAC_RXC_LNERRO() bfin_read32(EMAC_RXC_LNERRO) +#define bfin_write_EMAC_RXC_LNERRO(val) bfin_write32(EMAC_RXC_LNERRO, val) +#define bfin_read_EMAC_RXC_LONG() bfin_read32(EMAC_RXC_LONG) +#define bfin_write_EMAC_RXC_LONG(val) bfin_write32(EMAC_RXC_LONG, val) +#define bfin_read_EMAC_RXC_MACCTL() bfin_read32(EMAC_RXC_MACCTL) +#define bfin_write_EMAC_RXC_MACCTL(val) bfin_write32(EMAC_RXC_MACCTL, val) +#define bfin_read_EMAC_RXC_OPCODE() bfin_read32(EMAC_RXC_OPCODE) +#define bfin_write_EMAC_RXC_OPCODE(val) bfin_write32(EMAC_RXC_OPCODE, val) +#define bfin_read_EMAC_RXC_PAUSE() bfin_read32(EMAC_RXC_PAUSE) +#define bfin_write_EMAC_RXC_PAUSE(val) bfin_write32(EMAC_RXC_PAUSE, val) +#define bfin_read_EMAC_RXC_ALLFRM() bfin_read32(EMAC_RXC_ALLFRM) +#define bfin_write_EMAC_RXC_ALLFRM(val) bfin_write32(EMAC_RXC_ALLFRM, val) +#define bfin_read_EMAC_RXC_ALLOCT() bfin_read32(EMAC_RXC_ALLOCT) +#define bfin_write_EMAC_RXC_ALLOCT(val) bfin_write32(EMAC_RXC_ALLOCT, val) +#define bfin_read_EMAC_RXC_TYPED() bfin_read32(EMAC_RXC_TYPED) +#define bfin_write_EMAC_RXC_TYPED(val) bfin_write32(EMAC_RXC_TYPED, val) +#define bfin_read_EMAC_RXC_SHORT() bfin_read32(EMAC_RXC_SHORT) +#define bfin_write_EMAC_RXC_SHORT(val) bfin_write32(EMAC_RXC_SHORT, val) +#define bfin_read_EMAC_RXC_EQ64() bfin_read32(EMAC_RXC_EQ64) +#define bfin_write_EMAC_RXC_EQ64(val) bfin_write32(EMAC_RXC_EQ64, val) +#define bfin_read_EMAC_RXC_LT128() bfin_read32(EMAC_RXC_LT128) +#define bfin_write_EMAC_RXC_LT128(val) bfin_write32(EMAC_RXC_LT128, val) +#define bfin_read_EMAC_RXC_LT256() bfin_read32(EMAC_RXC_LT256) +#define bfin_write_EMAC_RXC_LT256(val) bfin_write32(EMAC_RXC_LT256, val) +#define bfin_read_EMAC_RXC_LT512() bfin_read32(EMAC_RXC_LT512) +#define bfin_write_EMAC_RXC_LT512(val) bfin_write32(EMAC_RXC_LT512, val) +#define bfin_read_EMAC_RXC_LT1024() bfin_read32(EMAC_RXC_LT1024) +#define bfin_write_EMAC_RXC_LT1024(val) bfin_write32(EMAC_RXC_LT1024, val) +#define bfin_read_EMAC_RXC_GE1024() bfin_read32(EMAC_RXC_GE1024) +#define bfin_write_EMAC_RXC_GE1024(val) bfin_write32(EMAC_RXC_GE1024, val) + +#define bfin_read_EMAC_TXC_OK() bfin_read32(EMAC_TXC_OK) +#define bfin_write_EMAC_TXC_OK(val) bfin_write32(EMAC_TXC_OK, val) +#define bfin_read_EMAC_TXC_1COL() bfin_read32(EMAC_TXC_1COL) +#define bfin_write_EMAC_TXC_1COL(val) bfin_write32(EMAC_TXC_1COL, val) +#define bfin_read_EMAC_TXC_GT1COL() bfin_read32(EMAC_TXC_GT1COL) +#define bfin_write_EMAC_TXC_GT1COL(val) bfin_write32(EMAC_TXC_GT1COL, val) +#define bfin_read_EMAC_TXC_OCTET() bfin_read32(EMAC_TXC_OCTET) +#define bfin_write_EMAC_TXC_OCTET(val) bfin_write32(EMAC_TXC_OCTET, val) +#define bfin_read_EMAC_TXC_DEFER() bfin_read32(EMAC_TXC_DEFER) +#define bfin_write_EMAC_TXC_DEFER(val) bfin_write32(EMAC_TXC_DEFER, val) +#define bfin_read_EMAC_TXC_LATECL() bfin_read32(EMAC_TXC_LATECL) +#define bfin_write_EMAC_TXC_LATECL(val) bfin_write32(EMAC_TXC_LATECL, val) +#define bfin_read_EMAC_TXC_XS_COL() bfin_read32(EMAC_TXC_XS_COL) +#define bfin_write_EMAC_TXC_XS_COL(val) bfin_write32(EMAC_TXC_XS_COL, val) +#define bfin_read_EMAC_TXC_DMAUND() bfin_read32(EMAC_TXC_DMAUND) +#define bfin_write_EMAC_TXC_DMAUND(val) bfin_write32(EMAC_TXC_DMAUND, val) +#define bfin_read_EMAC_TXC_CRSERR() bfin_read32(EMAC_TXC_CRSERR) +#define bfin_write_EMAC_TXC_CRSERR(val) bfin_write32(EMAC_TXC_CRSERR, val) +#define bfin_read_EMAC_TXC_UNICST() bfin_read32(EMAC_TXC_UNICST) +#define bfin_write_EMAC_TXC_UNICST(val) bfin_write32(EMAC_TXC_UNICST, val) +#define bfin_read_EMAC_TXC_MULTI() bfin_read32(EMAC_TXC_MULTI) +#define bfin_write_EMAC_TXC_MULTI(val) bfin_write32(EMAC_TXC_MULTI, val) +#define bfin_read_EMAC_TXC_BROAD() bfin_read32(EMAC_TXC_BROAD) +#define bfin_write_EMAC_TXC_BROAD(val) bfin_write32(EMAC_TXC_BROAD, val) +#define bfin_read_EMAC_TXC_XS_DFR() bfin_read32(EMAC_TXC_XS_DFR) +#define bfin_write_EMAC_TXC_XS_DFR(val) bfin_write32(EMAC_TXC_XS_DFR, val) +#define bfin_read_EMAC_TXC_MACCTL() bfin_read32(EMAC_TXC_MACCTL) +#define bfin_write_EMAC_TXC_MACCTL(val) bfin_write32(EMAC_TXC_MACCTL, val) +#define bfin_read_EMAC_TXC_ALLFRM() bfin_read32(EMAC_TXC_ALLFRM) +#define bfin_write_EMAC_TXC_ALLFRM(val) bfin_write32(EMAC_TXC_ALLFRM, val) +#define bfin_read_EMAC_TXC_ALLOCT() bfin_read32(EMAC_TXC_ALLOCT) +#define bfin_write_EMAC_TXC_ALLOCT(val) bfin_write32(EMAC_TXC_ALLOCT, val) +#define bfin_read_EMAC_TXC_EQ64() bfin_read32(EMAC_TXC_EQ64) +#define bfin_write_EMAC_TXC_EQ64(val) bfin_write32(EMAC_TXC_EQ64, val) +#define bfin_read_EMAC_TXC_LT128() bfin_read32(EMAC_TXC_LT128) +#define bfin_write_EMAC_TXC_LT128(val) bfin_write32(EMAC_TXC_LT128, val) +#define bfin_read_EMAC_TXC_LT256() bfin_read32(EMAC_TXC_LT256) +#define bfin_write_EMAC_TXC_LT256(val) bfin_write32(EMAC_TXC_LT256, val) +#define bfin_read_EMAC_TXC_LT512() bfin_read32(EMAC_TXC_LT512) +#define bfin_write_EMAC_TXC_LT512(val) bfin_write32(EMAC_TXC_LT512, val) +#define bfin_read_EMAC_TXC_LT1024() bfin_read32(EMAC_TXC_LT1024) +#define bfin_write_EMAC_TXC_LT1024(val) bfin_write32(EMAC_TXC_LT1024, val) +#define bfin_read_EMAC_TXC_GE1024() bfin_read32(EMAC_TXC_GE1024) +#define bfin_write_EMAC_TXC_GE1024(val) bfin_write32(EMAC_TXC_GE1024, val) +#define bfin_read_EMAC_TXC_ABORT() bfin_read32(EMAC_TXC_ABORT) +#define bfin_write_EMAC_TXC_ABORT(val) bfin_write32(EMAC_TXC_ABORT, val) + +/* USB Control Registers */ + +#define bfin_read_USB_FADDR() bfin_read16(USB_FADDR) +#define bfin_write_USB_FADDR(val) bfin_write16(USB_FADDR, val) +#define bfin_read_USB_POWER() bfin_read16(USB_POWER) +#define bfin_write_USB_POWER(val) bfin_write16(USB_POWER, val) +#define bfin_read_USB_INTRTX() bfin_read16(USB_INTRTX) +#define bfin_write_USB_INTRTX(val) bfin_write16(USB_INTRTX, val) +#define bfin_read_USB_INTRRX() bfin_read16(USB_INTRRX) +#define bfin_write_USB_INTRRX(val) bfin_write16(USB_INTRRX, val) +#define bfin_read_USB_INTRTXE() bfin_read16(USB_INTRTXE) +#define bfin_write_USB_INTRTXE(val) bfin_write16(USB_INTRTXE, val) +#define bfin_read_USB_INTRRXE() bfin_read16(USB_INTRRXE) +#define bfin_write_USB_INTRRXE(val) bfin_write16(USB_INTRRXE, val) +#define bfin_read_USB_INTRUSB() bfin_read16(USB_INTRUSB) +#define bfin_write_USB_INTRUSB(val) bfin_write16(USB_INTRUSB, val) +#define bfin_read_USB_INTRUSBE() bfin_read16(USB_INTRUSBE) +#define bfin_write_USB_INTRUSBE(val) bfin_write16(USB_INTRUSBE, val) +#define bfin_read_USB_FRAME() bfin_read16(USB_FRAME) +#define bfin_write_USB_FRAME(val) bfin_write16(USB_FRAME, val) +#define bfin_read_USB_INDEX() bfin_read16(USB_INDEX) +#define bfin_write_USB_INDEX(val) bfin_write16(USB_INDEX, val) +#define bfin_read_USB_TESTMODE() bfin_read16(USB_TESTMODE) +#define bfin_write_USB_TESTMODE(val) bfin_write16(USB_TESTMODE, val) +#define bfin_read_USB_GLOBINTR() bfin_read16(USB_GLOBINTR) +#define bfin_write_USB_GLOBINTR(val) bfin_write16(USB_GLOBINTR, val) +#define bfin_read_USB_GLOBAL_CTL() bfin_read16(USB_GLOBAL_CTL) +#define bfin_write_USB_GLOBAL_CTL(val) bfin_write16(USB_GLOBAL_CTL, val) + +/* USB Packet Control Registers */ + +#define bfin_read_USB_TX_MAX_PACKET() bfin_read16(USB_TX_MAX_PACKET) +#define bfin_write_USB_TX_MAX_PACKET(val) bfin_write16(USB_TX_MAX_PACKET, val) +#define bfin_read_USB_CSR0() bfin_read16(USB_CSR0) +#define bfin_write_USB_CSR0(val) bfin_write16(USB_CSR0, val) +#define bfin_read_USB_TXCSR() bfin_read16(USB_TXCSR) +#define bfin_write_USB_TXCSR(val) bfin_write16(USB_TXCSR, val) +#define bfin_read_USB_RX_MAX_PACKET() bfin_read16(USB_RX_MAX_PACKET) +#define bfin_write_USB_RX_MAX_PACKET(val) bfin_write16(USB_RX_MAX_PACKET, val) +#define bfin_read_USB_RXCSR() bfin_read16(USB_RXCSR) +#define bfin_write_USB_RXCSR(val) bfin_write16(USB_RXCSR, val) +#define bfin_read_USB_COUNT0() bfin_read16(USB_COUNT0) +#define bfin_write_USB_COUNT0(val) bfin_write16(USB_COUNT0, val) +#define bfin_read_USB_RXCOUNT() bfin_read16(USB_RXCOUNT) +#define bfin_write_USB_RXCOUNT(val) bfin_write16(USB_RXCOUNT, val) +#define bfin_read_USB_TXTYPE() bfin_read16(USB_TXTYPE) +#define bfin_write_USB_TXTYPE(val) bfin_write16(USB_TXTYPE, val) +#define bfin_read_USB_NAKLIMIT0() bfin_read16(USB_NAKLIMIT0) +#define bfin_write_USB_NAKLIMIT0(val) bfin_write16(USB_NAKLIMIT0, val) +#define bfin_read_USB_TXINTERVAL() bfin_read16(USB_TXINTERVAL) +#define bfin_write_USB_TXINTERVAL(val) bfin_write16(USB_TXINTERVAL, val) +#define bfin_read_USB_RXTYPE() bfin_read16(USB_RXTYPE) +#define bfin_write_USB_RXTYPE(val) bfin_write16(USB_RXTYPE, val) +#define bfin_read_USB_RXINTERVAL() bfin_read16(USB_RXINTERVAL) +#define bfin_write_USB_RXINTERVAL(val) bfin_write16(USB_RXINTERVAL, val) +#define bfin_read_USB_TXCOUNT() bfin_read16(USB_TXCOUNT) +#define bfin_write_USB_TXCOUNT(val) bfin_write16(USB_TXCOUNT, val) + +/* USB Endpoint FIFO Registers */ + +#define bfin_read_USB_EP0_FIFO() bfin_read16(USB_EP0_FIFO) +#define bfin_write_USB_EP0_FIFO(val) bfin_write16(USB_EP0_FIFO, val) +#define bfin_read_USB_EP1_FIFO() bfin_read16(USB_EP1_FIFO) +#define bfin_write_USB_EP1_FIFO(val) bfin_write16(USB_EP1_FIFO, val) +#define bfin_read_USB_EP2_FIFO() bfin_read16(USB_EP2_FIFO) +#define bfin_write_USB_EP2_FIFO(val) bfin_write16(USB_EP2_FIFO, val) +#define bfin_read_USB_EP3_FIFO() bfin_read16(USB_EP3_FIFO) +#define bfin_write_USB_EP3_FIFO(val) bfin_write16(USB_EP3_FIFO, val) +#define bfin_read_USB_EP4_FIFO() bfin_read16(USB_EP4_FIFO) +#define bfin_write_USB_EP4_FIFO(val) bfin_write16(USB_EP4_FIFO, val) +#define bfin_read_USB_EP5_FIFO() bfin_read16(USB_EP5_FIFO) +#define bfin_write_USB_EP5_FIFO(val) bfin_write16(USB_EP5_FIFO, val) +#define bfin_read_USB_EP6_FIFO() bfin_read16(USB_EP6_FIFO) +#define bfin_write_USB_EP6_FIFO(val) bfin_write16(USB_EP6_FIFO, val) +#define bfin_read_USB_EP7_FIFO() bfin_read16(USB_EP7_FIFO) +#define bfin_write_USB_EP7_FIFO(val) bfin_write16(USB_EP7_FIFO, val) + +/* USB OTG Control Registers */ + +#define bfin_read_USB_OTG_DEV_CTL() bfin_read16(USB_OTG_DEV_CTL) +#define bfin_write_USB_OTG_DEV_CTL(val) bfin_write16(USB_OTG_DEV_CTL, val) +#define bfin_read_USB_OTG_VBUS_IRQ() bfin_read16(USB_OTG_VBUS_IRQ) +#define bfin_write_USB_OTG_VBUS_IRQ(val) bfin_write16(USB_OTG_VBUS_IRQ, val) +#define bfin_read_USB_OTG_VBUS_MASK() bfin_read16(USB_OTG_VBUS_MASK) +#define bfin_write_USB_OTG_VBUS_MASK(val) bfin_write16(USB_OTG_VBUS_MASK, val) + +/* USB Phy Control Registers */ + +#define bfin_read_USB_LINKINFO() bfin_read16(USB_LINKINFO) +#define bfin_write_USB_LINKINFO(val) bfin_write16(USB_LINKINFO, val) +#define bfin_read_USB_VPLEN() bfin_read16(USB_VPLEN) +#define bfin_write_USB_VPLEN(val) bfin_write16(USB_VPLEN, val) +#define bfin_read_USB_HS_EOF1() bfin_read16(USB_HS_EOF1) +#define bfin_write_USB_HS_EOF1(val) bfin_write16(USB_HS_EOF1, val) +#define bfin_read_USB_FS_EOF1() bfin_read16(USB_FS_EOF1) +#define bfin_write_USB_FS_EOF1(val) bfin_write16(USB_FS_EOF1, val) +#define bfin_read_USB_LS_EOF1() bfin_read16(USB_LS_EOF1) +#define bfin_write_USB_LS_EOF1(val) bfin_write16(USB_LS_EOF1, val) + +/* (APHY_CNTRL is for ADI usage only) */ + +#define bfin_read_USB_APHY_CNTRL() bfin_read16(USB_APHY_CNTRL) +#define bfin_write_USB_APHY_CNTRL(val) bfin_write16(USB_APHY_CNTRL, val) + +/* (APHY_CALIB is for ADI usage only) */ + +#define bfin_read_USB_APHY_CALIB() bfin_read16(USB_APHY_CALIB) +#define bfin_write_USB_APHY_CALIB(val) bfin_write16(USB_APHY_CALIB, val) + +#define bfin_read_USB_APHY_CNTRL2() bfin_read16(USB_APHY_CNTRL2) +#define bfin_write_USB_APHY_CNTRL2(val) bfin_write16(USB_APHY_CNTRL2, val) + +/* (PHY_TEST is for ADI usage only) */ + +#define bfin_read_USB_PHY_TEST() bfin_read16(USB_PHY_TEST) +#define bfin_write_USB_PHY_TEST(val) bfin_write16(USB_PHY_TEST, val) + +#define bfin_read_USB_PLLOSC_CTRL() bfin_read16(USB_PLLOSC_CTRL) +#define bfin_write_USB_PLLOSC_CTRL(val) bfin_write16(USB_PLLOSC_CTRL, val) +#define bfin_read_USB_SRP_CLKDIV() bfin_read16(USB_SRP_CLKDIV) +#define bfin_write_USB_SRP_CLKDIV(val) bfin_write16(USB_SRP_CLKDIV, val) + +/* USB Endpoint 0 Control Registers */ + +#define bfin_read_USB_EP_NI0_TXMAXP() bfin_read16(USB_EP_NI0_TXMAXP) +#define bfin_write_USB_EP_NI0_TXMAXP(val) bfin_write16(USB_EP_NI0_TXMAXP, val) +#define bfin_read_USB_EP_NI0_TXCSR() bfin_read16(USB_EP_NI0_TXCSR) +#define bfin_write_USB_EP_NI0_TXCSR(val) bfin_write16(USB_EP_NI0_TXCSR, val) +#define bfin_read_USB_EP_NI0_RXMAXP() bfin_read16(USB_EP_NI0_RXMAXP) +#define bfin_write_USB_EP_NI0_RXMAXP(val) bfin_write16(USB_EP_NI0_RXMAXP, val) +#define bfin_read_USB_EP_NI0_RXCSR() bfin_read16(USB_EP_NI0_RXCSR) +#define bfin_write_USB_EP_NI0_RXCSR(val) bfin_write16(USB_EP_NI0_RXCSR, val) +#define bfin_read_USB_EP_NI0_RXCOUNT() bfin_read16(USB_EP_NI0_RXCOUNT) +#define bfin_write_USB_EP_NI0_RXCOUNT(val) bfin_write16(USB_EP_NI0_RXCOUNT, val) +#define bfin_read_USB_EP_NI0_TXTYPE() bfin_read16(USB_EP_NI0_TXTYPE) +#define bfin_write_USB_EP_NI0_TXTYPE(val) bfin_write16(USB_EP_NI0_TXTYPE, val) +#define bfin_read_USB_EP_NI0_TXINTERVAL() bfin_read16(USB_EP_NI0_TXINTERVAL) +#define bfin_write_USB_EP_NI0_TXINTERVAL(val) bfin_write16(USB_EP_NI0_TXINTERVAL, val) +#define bfin_read_USB_EP_NI0_RXTYPE() bfin_read16(USB_EP_NI0_RXTYPE) +#define bfin_write_USB_EP_NI0_RXTYPE(val) bfin_write16(USB_EP_NI0_RXTYPE, val) +#define bfin_read_USB_EP_NI0_RXINTERVAL() bfin_read16(USB_EP_NI0_RXINTERVAL) +#define bfin_write_USB_EP_NI0_RXINTERVAL(val) bfin_write16(USB_EP_NI0_RXINTERVAL, val) +#define bfin_read_USB_EP_NI0_TXCOUNT() bfin_read16(USB_EP_NI0_TXCOUNT) +#define bfin_write_USB_EP_NI0_TXCOUNT(val) bfin_write16(USB_EP_NI0_TXCOUNT, val) + +/* USB Endpoint 1 Control Registers */ + +#define bfin_read_USB_EP_NI1_TXMAXP() bfin_read16(USB_EP_NI1_TXMAXP) +#define bfin_write_USB_EP_NI1_TXMAXP(val) bfin_write16(USB_EP_NI1_TXMAXP, val) +#define bfin_read_USB_EP_NI1_TXCSR() bfin_read16(USB_EP_NI1_TXCSR) +#define bfin_write_USB_EP_NI1_TXCSR(val) bfin_write16(USB_EP_NI1_TXCSR, val) +#define bfin_read_USB_EP_NI1_RXMAXP() bfin_read16(USB_EP_NI1_RXMAXP) +#define bfin_write_USB_EP_NI1_RXMAXP(val) bfin_write16(USB_EP_NI1_RXMAXP, val) +#define bfin_read_USB_EP_NI1_RXCSR() bfin_read16(USB_EP_NI1_RXCSR) +#define bfin_write_USB_EP_NI1_RXCSR(val) bfin_write16(USB_EP_NI1_RXCSR, val) +#define bfin_read_USB_EP_NI1_RXCOUNT() bfin_read16(USB_EP_NI1_RXCOUNT) +#define bfin_write_USB_EP_NI1_RXCOUNT(val) bfin_write16(USB_EP_NI1_RXCOUNT, val) +#define bfin_read_USB_EP_NI1_TXTYPE() bfin_read16(USB_EP_NI1_TXTYPE) +#define bfin_write_USB_EP_NI1_TXTYPE(val) bfin_write16(USB_EP_NI1_TXTYPE, val) +#define bfin_read_USB_EP_NI1_TXINTERVAL() bfin_read16(USB_EP_NI1_TXINTERVAL) +#define bfin_write_USB_EP_NI1_TXINTERVAL(val) bfin_write16(USB_EP_NI1_TXINTERVAL, val) +#define bfin_read_USB_EP_NI1_RXTYPE() bfin_read16(USB_EP_NI1_RXTYPE) +#define bfin_write_USB_EP_NI1_RXTYPE(val) bfin_write16(USB_EP_NI1_RXTYPE, val) +#define bfin_read_USB_EP_NI1_RXINTERVAL() bfin_read16(USB_EP_NI1_RXINTERVAL) +#define bfin_write_USB_EP_NI1_RXINTERVAL(val) bfin_write16(USB_EP_NI1_RXINTERVAL, val) +#define bfin_read_USB_EP_NI1_TXCOUNT() bfin_read16(USB_EP_NI1_TXCOUNT) +#define bfin_write_USB_EP_NI1_TXCOUNT(val) bfin_write16(USB_EP_NI1_TXCOUNT, val) + +/* USB Endpoint 2 Control Registers */ + +#define bfin_read_USB_EP_NI2_TXMAXP() bfin_read16(USB_EP_NI2_TXMAXP) +#define bfin_write_USB_EP_NI2_TXMAXP(val) bfin_write16(USB_EP_NI2_TXMAXP, val) +#define bfin_read_USB_EP_NI2_TXCSR() bfin_read16(USB_EP_NI2_TXCSR) +#define bfin_write_USB_EP_NI2_TXCSR(val) bfin_write16(USB_EP_NI2_TXCSR, val) +#define bfin_read_USB_EP_NI2_RXMAXP() bfin_read16(USB_EP_NI2_RXMAXP) +#define bfin_write_USB_EP_NI2_RXMAXP(val) bfin_write16(USB_EP_NI2_RXMAXP, val) +#define bfin_read_USB_EP_NI2_RXCSR() bfin_read16(USB_EP_NI2_RXCSR) +#define bfin_write_USB_EP_NI2_RXCSR(val) bfin_write16(USB_EP_NI2_RXCSR, val) +#define bfin_read_USB_EP_NI2_RXCOUNT() bfin_read16(USB_EP_NI2_RXCOUNT) +#define bfin_write_USB_EP_NI2_RXCOUNT(val) bfin_write16(USB_EP_NI2_RXCOUNT, val) +#define bfin_read_USB_EP_NI2_TXTYPE() bfin_read16(USB_EP_NI2_TXTYPE) +#define bfin_write_USB_EP_NI2_TXTYPE(val) bfin_write16(USB_EP_NI2_TXTYPE, val) +#define bfin_read_USB_EP_NI2_TXINTERVAL() bfin_read16(USB_EP_NI2_TXINTERVAL) +#define bfin_write_USB_EP_NI2_TXINTERVAL(val) bfin_write16(USB_EP_NI2_TXINTERVAL, val) +#define bfin_read_USB_EP_NI2_RXTYPE() bfin_read16(USB_EP_NI2_RXTYPE) +#define bfin_write_USB_EP_NI2_RXTYPE(val) bfin_write16(USB_EP_NI2_RXTYPE, val) +#define bfin_read_USB_EP_NI2_RXINTERVAL() bfin_read16(USB_EP_NI2_RXINTERVAL) +#define bfin_write_USB_EP_NI2_RXINTERVAL(val) bfin_write16(USB_EP_NI2_RXINTERVAL, val) +#define bfin_read_USB_EP_NI2_TXCOUNT() bfin_read16(USB_EP_NI2_TXCOUNT) +#define bfin_write_USB_EP_NI2_TXCOUNT(val) bfin_write16(USB_EP_NI2_TXCOUNT, val) + +/* USB Endpoint 3 Control Registers */ + +#define bfin_read_USB_EP_NI3_TXMAXP() bfin_read16(USB_EP_NI3_TXMAXP) +#define bfin_write_USB_EP_NI3_TXMAXP(val) bfin_write16(USB_EP_NI3_TXMAXP, val) +#define bfin_read_USB_EP_NI3_TXCSR() bfin_read16(USB_EP_NI3_TXCSR) +#define bfin_write_USB_EP_NI3_TXCSR(val) bfin_write16(USB_EP_NI3_TXCSR, val) +#define bfin_read_USB_EP_NI3_RXMAXP() bfin_read16(USB_EP_NI3_RXMAXP) +#define bfin_write_USB_EP_NI3_RXMAXP(val) bfin_write16(USB_EP_NI3_RXMAXP, val) +#define bfin_read_USB_EP_NI3_RXCSR() bfin_read16(USB_EP_NI3_RXCSR) +#define bfin_write_USB_EP_NI3_RXCSR(val) bfin_write16(USB_EP_NI3_RXCSR, val) +#define bfin_read_USB_EP_NI3_RXCOUNT() bfin_read16(USB_EP_NI3_RXCOUNT) +#define bfin_write_USB_EP_NI3_RXCOUNT(val) bfin_write16(USB_EP_NI3_RXCOUNT, val) +#define bfin_read_USB_EP_NI3_TXTYPE() bfin_read16(USB_EP_NI3_TXTYPE) +#define bfin_write_USB_EP_NI3_TXTYPE(val) bfin_write16(USB_EP_NI3_TXTYPE, val) +#define bfin_read_USB_EP_NI3_TXINTERVAL() bfin_read16(USB_EP_NI3_TXINTERVAL) +#define bfin_write_USB_EP_NI3_TXINTERVAL(val) bfin_write16(USB_EP_NI3_TXINTERVAL, val) +#define bfin_read_USB_EP_NI3_RXTYPE() bfin_read16(USB_EP_NI3_RXTYPE) +#define bfin_write_USB_EP_NI3_RXTYPE(val) bfin_write16(USB_EP_NI3_RXTYPE, val) +#define bfin_read_USB_EP_NI3_RXINTERVAL() bfin_read16(USB_EP_NI3_RXINTERVAL) +#define bfin_write_USB_EP_NI3_RXINTERVAL(val) bfin_write16(USB_EP_NI3_RXINTERVAL, val) +#define bfin_read_USB_EP_NI3_TXCOUNT() bfin_read16(USB_EP_NI3_TXCOUNT) +#define bfin_write_USB_EP_NI3_TXCOUNT(val) bfin_write16(USB_EP_NI3_TXCOUNT, val) + +/* USB Endpoint 4 Control Registers */ + +#define bfin_read_USB_EP_NI4_TXMAXP() bfin_read16(USB_EP_NI4_TXMAXP) +#define bfin_write_USB_EP_NI4_TXMAXP(val) bfin_write16(USB_EP_NI4_TXMAXP, val) +#define bfin_read_USB_EP_NI4_TXCSR() bfin_read16(USB_EP_NI4_TXCSR) +#define bfin_write_USB_EP_NI4_TXCSR(val) bfin_write16(USB_EP_NI4_TXCSR, val) +#define bfin_read_USB_EP_NI4_RXMAXP() bfin_read16(USB_EP_NI4_RXMAXP) +#define bfin_write_USB_EP_NI4_RXMAXP(val) bfin_write16(USB_EP_NI4_RXMAXP, val) +#define bfin_read_USB_EP_NI4_RXCSR() bfin_read16(USB_EP_NI4_RXCSR) +#define bfin_write_USB_EP_NI4_RXCSR(val) bfin_write16(USB_EP_NI4_RXCSR, val) +#define bfin_read_USB_EP_NI4_RXCOUNT() bfin_read16(USB_EP_NI4_RXCOUNT) +#define bfin_write_USB_EP_NI4_RXCOUNT(val) bfin_write16(USB_EP_NI4_RXCOUNT, val) +#define bfin_read_USB_EP_NI4_TXTYPE() bfin_read16(USB_EP_NI4_TXTYPE) +#define bfin_write_USB_EP_NI4_TXTYPE(val) bfin_write16(USB_EP_NI4_TXTYPE, val) +#define bfin_read_USB_EP_NI4_TXINTERVAL() bfin_read16(USB_EP_NI4_TXINTERVAL) +#define bfin_write_USB_EP_NI4_TXINTERVAL(val) bfin_write16(USB_EP_NI4_TXINTERVAL, val) +#define bfin_read_USB_EP_NI4_RXTYPE() bfin_read16(USB_EP_NI4_RXTYPE) +#define bfin_write_USB_EP_NI4_RXTYPE(val) bfin_write16(USB_EP_NI4_RXTYPE, val) +#define bfin_read_USB_EP_NI4_RXINTERVAL() bfin_read16(USB_EP_NI4_RXINTERVAL) +#define bfin_write_USB_EP_NI4_RXINTERVAL(val) bfin_write16(USB_EP_NI4_RXINTERVAL, val) +#define bfin_read_USB_EP_NI4_TXCOUNT() bfin_read16(USB_EP_NI4_TXCOUNT) +#define bfin_write_USB_EP_NI4_TXCOUNT(val) bfin_write16(USB_EP_NI4_TXCOUNT, val) + +/* USB Endpoint 5 Control Registers */ + +#define bfin_read_USB_EP_NI5_TXMAXP() bfin_read16(USB_EP_NI5_TXMAXP) +#define bfin_write_USB_EP_NI5_TXMAXP(val) bfin_write16(USB_EP_NI5_TXMAXP, val) +#define bfin_read_USB_EP_NI5_TXCSR() bfin_read16(USB_EP_NI5_TXCSR) +#define bfin_write_USB_EP_NI5_TXCSR(val) bfin_write16(USB_EP_NI5_TXCSR, val) +#define bfin_read_USB_EP_NI5_RXMAXP() bfin_read16(USB_EP_NI5_RXMAXP) +#define bfin_write_USB_EP_NI5_RXMAXP(val) bfin_write16(USB_EP_NI5_RXMAXP, val) +#define bfin_read_USB_EP_NI5_RXCSR() bfin_read16(USB_EP_NI5_RXCSR) +#define bfin_write_USB_EP_NI5_RXCSR(val) bfin_write16(USB_EP_NI5_RXCSR, val) +#define bfin_read_USB_EP_NI5_RXCOUNT() bfin_read16(USB_EP_NI5_RXCOUNT) +#define bfin_write_USB_EP_NI5_RXCOUNT(val) bfin_write16(USB_EP_NI5_RXCOUNT, val) +#define bfin_read_USB_EP_NI5_TXTYPE() bfin_read16(USB_EP_NI5_TXTYPE) +#define bfin_write_USB_EP_NI5_TXTYPE(val) bfin_write16(USB_EP_NI5_TXTYPE, val) +#define bfin_read_USB_EP_NI5_TXINTERVAL() bfin_read16(USB_EP_NI5_TXINTERVAL) +#define bfin_write_USB_EP_NI5_TXINTERVAL(val) bfin_write16(USB_EP_NI5_TXINTERVAL, val) +#define bfin_read_USB_EP_NI5_RXTYPE() bfin_read16(USB_EP_NI5_RXTYPE) +#define bfin_write_USB_EP_NI5_RXTYPE(val) bfin_write16(USB_EP_NI5_RXTYPE, val) +#define bfin_read_USB_EP_NI5_RXINTERVAL() bfin_read16(USB_EP_NI5_RXINTERVAL) +#define bfin_write_USB_EP_NI5_RXINTERVAL(val) bfin_write16(USB_EP_NI5_RXINTERVAL, val) +#define bfin_read_USB_EP_NI5_TXCOUNT() bfin_read16(USB_EP_NI5_TXCOUNT) +#define bfin_write_USB_EP_NI5_TXCOUNT(val) bfin_write16(USB_EP_NI5_TXCOUNT, val) + +/* USB Endpoint 6 Control Registers */ + +#define bfin_read_USB_EP_NI6_TXMAXP() bfin_read16(USB_EP_NI6_TXMAXP) +#define bfin_write_USB_EP_NI6_TXMAXP(val) bfin_write16(USB_EP_NI6_TXMAXP, val) +#define bfin_read_USB_EP_NI6_TXCSR() bfin_read16(USB_EP_NI6_TXCSR) +#define bfin_write_USB_EP_NI6_TXCSR(val) bfin_write16(USB_EP_NI6_TXCSR, val) +#define bfin_read_USB_EP_NI6_RXMAXP() bfin_read16(USB_EP_NI6_RXMAXP) +#define bfin_write_USB_EP_NI6_RXMAXP(val) bfin_write16(USB_EP_NI6_RXMAXP, val) +#define bfin_read_USB_EP_NI6_RXCSR() bfin_read16(USB_EP_NI6_RXCSR) +#define bfin_write_USB_EP_NI6_RXCSR(val) bfin_write16(USB_EP_NI6_RXCSR, val) +#define bfin_read_USB_EP_NI6_RXCOUNT() bfin_read16(USB_EP_NI6_RXCOUNT) +#define bfin_write_USB_EP_NI6_RXCOUNT(val) bfin_write16(USB_EP_NI6_RXCOUNT, val) +#define bfin_read_USB_EP_NI6_TXTYPE() bfin_read16(USB_EP_NI6_TXTYPE) +#define bfin_write_USB_EP_NI6_TXTYPE(val) bfin_write16(USB_EP_NI6_TXTYPE, val) +#define bfin_read_USB_EP_NI6_TXINTERVAL() bfin_read16(USB_EP_NI6_TXINTERVAL) +#define bfin_write_USB_EP_NI6_TXINTERVAL(val) bfin_write16(USB_EP_NI6_TXINTERVAL, val) +#define bfin_read_USB_EP_NI6_RXTYPE() bfin_read16(USB_EP_NI6_RXTYPE) +#define bfin_write_USB_EP_NI6_RXTYPE(val) bfin_write16(USB_EP_NI6_RXTYPE, val) +#define bfin_read_USB_EP_NI6_RXINTERVAL() bfin_read16(USB_EP_NI6_RXINTERVAL) +#define bfin_write_USB_EP_NI6_RXINTERVAL(val) bfin_write16(USB_EP_NI6_RXINTERVAL, val) +#define bfin_read_USB_EP_NI6_TXCOUNT() bfin_read16(USB_EP_NI6_TXCOUNT) +#define bfin_write_USB_EP_NI6_TXCOUNT(val) bfin_write16(USB_EP_NI6_TXCOUNT, val) + +/* USB Endpoint 7 Control Registers */ + +#define bfin_read_USB_EP_NI7_TXMAXP() bfin_read16(USB_EP_NI7_TXMAXP) +#define bfin_write_USB_EP_NI7_TXMAXP(val) bfin_write16(USB_EP_NI7_TXMAXP, val) +#define bfin_read_USB_EP_NI7_TXCSR() bfin_read16(USB_EP_NI7_TXCSR) +#define bfin_write_USB_EP_NI7_TXCSR(val) bfin_write16(USB_EP_NI7_TXCSR, val) +#define bfin_read_USB_EP_NI7_RXMAXP() bfin_read16(USB_EP_NI7_RXMAXP) +#define bfin_write_USB_EP_NI7_RXMAXP(val) bfin_write16(USB_EP_NI7_RXMAXP, val) +#define bfin_read_USB_EP_NI7_RXCSR() bfin_read16(USB_EP_NI7_RXCSR) +#define bfin_write_USB_EP_NI7_RXCSR(val) bfin_write16(USB_EP_NI7_RXCSR, val) +#define bfin_read_USB_EP_NI7_RXCOUNT() bfin_read16(USB_EP_NI7_RXCOUNT) +#define bfin_write_USB_EP_NI7_RXCOUNT(val) bfin_write16(USB_EP_NI7_RXCOUNT, val) +#define bfin_read_USB_EP_NI7_TXTYPE() bfin_read16(USB_EP_NI7_TXTYPE) +#define bfin_write_USB_EP_NI7_TXTYPE(val) bfin_write16(USB_EP_NI7_TXTYPE, val) +#define bfin_read_USB_EP_NI7_TXINTERVAL() bfin_read16(USB_EP_NI7_TXINTERVAL) +#define bfin_write_USB_EP_NI7_TXINTERVAL(val) bfin_write16(USB_EP_NI7_TXINTERVAL, val) +#define bfin_read_USB_EP_NI7_RXTYPE() bfin_read16(USB_EP_NI7_RXTYPE) +#define bfin_write_USB_EP_NI7_RXTYPE(val) bfin_write16(USB_EP_NI7_RXTYPE, val) +#define bfin_read_USB_EP_NI7_RXINTERVAL() bfin_read16(USB_EP_NI7_RXINTERVAL) +#define bfin_write_USB_EP_NI7_RXINTERVAL(val) bfin_write16(USB_EP_NI7_RXINTERVAL, val) +#define bfin_read_USB_EP_NI7_TXCOUNT() bfin_read16(USB_EP_NI7_TXCOUNT) +#define bfin_write_USB_EP_NI7_TXCOUNT(val) bfin_write16(USB_EP_NI7_TXCOUNT, val) + +#define bfin_read_USB_DMA_INTERRUPT() bfin_read16(USB_DMA_INTERRUPT) +#define bfin_write_USB_DMA_INTERRUPT(val) bfin_write16(USB_DMA_INTERRUPT, val) + +/* USB Channel 0 Config Registers */ + +#define bfin_read_USB_DMA0CONTROL() bfin_read16(USB_DMA0CONTROL) +#define bfin_write_USB_DMA0CONTROL(val) bfin_write16(USB_DMA0CONTROL, val) +#define bfin_read_USB_DMA0ADDRLOW() bfin_read16(USB_DMA0ADDRLOW) +#define bfin_write_USB_DMA0ADDRLOW(val) bfin_write16(USB_DMA0ADDRLOW, val) +#define bfin_read_USB_DMA0ADDRHIGH() bfin_read16(USB_DMA0ADDRHIGH) +#define bfin_write_USB_DMA0ADDRHIGH(val) bfin_write16(USB_DMA0ADDRHIGH, val) +#define bfin_read_USB_DMA0COUNTLOW() bfin_read16(USB_DMA0COUNTLOW) +#define bfin_write_USB_DMA0COUNTLOW(val) bfin_write16(USB_DMA0COUNTLOW, val) +#define bfin_read_USB_DMA0COUNTHIGH() bfin_read16(USB_DMA0COUNTHIGH) +#define bfin_write_USB_DMA0COUNTHIGH(val) bfin_write16(USB_DMA0COUNTHIGH, val) + +/* USB Channel 1 Config Registers */ + +#define bfin_read_USB_DMA1CONTROL() bfin_read16(USB_DMA1CONTROL) +#define bfin_write_USB_DMA1CONTROL(val) bfin_write16(USB_DMA1CONTROL, val) +#define bfin_read_USB_DMA1ADDRLOW() bfin_read16(USB_DMA1ADDRLOW) +#define bfin_write_USB_DMA1ADDRLOW(val) bfin_write16(USB_DMA1ADDRLOW, val) +#define bfin_read_USB_DMA1ADDRHIGH() bfin_read16(USB_DMA1ADDRHIGH) +#define bfin_write_USB_DMA1ADDRHIGH(val) bfin_write16(USB_DMA1ADDRHIGH, val) +#define bfin_read_USB_DMA1COUNTLOW() bfin_read16(USB_DMA1COUNTLOW) +#define bfin_write_USB_DMA1COUNTLOW(val) bfin_write16(USB_DMA1COUNTLOW, val) +#define bfin_read_USB_DMA1COUNTHIGH() bfin_read16(USB_DMA1COUNTHIGH) +#define bfin_write_USB_DMA1COUNTHIGH(val) bfin_write16(USB_DMA1COUNTHIGH, val) + +/* USB Channel 2 Config Registers */ + +#define bfin_read_USB_DMA2CONTROL() bfin_read16(USB_DMA2CONTROL) +#define bfin_write_USB_DMA2CONTROL(val) bfin_write16(USB_DMA2CONTROL, val) +#define bfin_read_USB_DMA2ADDRLOW() bfin_read16(USB_DMA2ADDRLOW) +#define bfin_write_USB_DMA2ADDRLOW(val) bfin_write16(USB_DMA2ADDRLOW, val) +#define bfin_read_USB_DMA2ADDRHIGH() bfin_read16(USB_DMA2ADDRHIGH) +#define bfin_write_USB_DMA2ADDRHIGH(val) bfin_write16(USB_DMA2ADDRHIGH, val) +#define bfin_read_USB_DMA2COUNTLOW() bfin_read16(USB_DMA2COUNTLOW) +#define bfin_write_USB_DMA2COUNTLOW(val) bfin_write16(USB_DMA2COUNTLOW, val) +#define bfin_read_USB_DMA2COUNTHIGH() bfin_read16(USB_DMA2COUNTHIGH) +#define bfin_write_USB_DMA2COUNTHIGH(val) bfin_write16(USB_DMA2COUNTHIGH, val) + +/* USB Channel 3 Config Registers */ + +#define bfin_read_USB_DMA3CONTROL() bfin_read16(USB_DMA3CONTROL) +#define bfin_write_USB_DMA3CONTROL(val) bfin_write16(USB_DMA3CONTROL, val) +#define bfin_read_USB_DMA3ADDRLOW() bfin_read16(USB_DMA3ADDRLOW) +#define bfin_write_USB_DMA3ADDRLOW(val) bfin_write16(USB_DMA3ADDRLOW, val) +#define bfin_read_USB_DMA3ADDRHIGH() bfin_read16(USB_DMA3ADDRHIGH) +#define bfin_write_USB_DMA3ADDRHIGH(val) bfin_write16(USB_DMA3ADDRHIGH, val) +#define bfin_read_USB_DMA3COUNTLOW() bfin_read16(USB_DMA3COUNTLOW) +#define bfin_write_USB_DMA3COUNTLOW(val) bfin_write16(USB_DMA3COUNTLOW, val) +#define bfin_read_USB_DMA3COUNTHIGH() bfin_read16(USB_DMA3COUNTHIGH) +#define bfin_write_USB_DMA3COUNTHIGH(val) bfin_write16(USB_DMA3COUNTHIGH, val) + +/* USB Channel 4 Config Registers */ + +#define bfin_read_USB_DMA4CONTROL() bfin_read16(USB_DMA4CONTROL) +#define bfin_write_USB_DMA4CONTROL(val) bfin_write16(USB_DMA4CONTROL, val) +#define bfin_read_USB_DMA4ADDRLOW() bfin_read16(USB_DMA4ADDRLOW) +#define bfin_write_USB_DMA4ADDRLOW(val) bfin_write16(USB_DMA4ADDRLOW, val) +#define bfin_read_USB_DMA4ADDRHIGH() bfin_read16(USB_DMA4ADDRHIGH) +#define bfin_write_USB_DMA4ADDRHIGH(val) bfin_write16(USB_DMA4ADDRHIGH, val) +#define bfin_read_USB_DMA4COUNTLOW() bfin_read16(USB_DMA4COUNTLOW) +#define bfin_write_USB_DMA4COUNTLOW(val) bfin_write16(USB_DMA4COUNTLOW, val) +#define bfin_read_USB_DMA4COUNTHIGH() bfin_read16(USB_DMA4COUNTHIGH) +#define bfin_write_USB_DMA4COUNTHIGH(val) bfin_write16(USB_DMA4COUNTHIGH, val) + +/* USB Channel 5 Config Registers */ + +#define bfin_read_USB_DMA5CONTROL() bfin_read16(USB_DMA5CONTROL) +#define bfin_write_USB_DMA5CONTROL(val) bfin_write16(USB_DMA5CONTROL, val) +#define bfin_read_USB_DMA5ADDRLOW() bfin_read16(USB_DMA5ADDRLOW) +#define bfin_write_USB_DMA5ADDRLOW(val) bfin_write16(USB_DMA5ADDRLOW, val) +#define bfin_read_USB_DMA5ADDRHIGH() bfin_read16(USB_DMA5ADDRHIGH) +#define bfin_write_USB_DMA5ADDRHIGH(val) bfin_write16(USB_DMA5ADDRHIGH, val) +#define bfin_read_USB_DMA5COUNTLOW() bfin_read16(USB_DMA5COUNTLOW) +#define bfin_write_USB_DMA5COUNTLOW(val) bfin_write16(USB_DMA5COUNTLOW, val) +#define bfin_read_USB_DMA5COUNTHIGH() bfin_read16(USB_DMA5COUNTHIGH) +#define bfin_write_USB_DMA5COUNTHIGH(val) bfin_write16(USB_DMA5COUNTHIGH, val) + +/* USB Channel 6 Config Registers */ + +#define bfin_read_USB_DMA6CONTROL() bfin_read16(USB_DMA6CONTROL) +#define bfin_write_USB_DMA6CONTROL(val) bfin_write16(USB_DMA6CONTROL, val) +#define bfin_read_USB_DMA6ADDRLOW() bfin_read16(USB_DMA6ADDRLOW) +#define bfin_write_USB_DMA6ADDRLOW(val) bfin_write16(USB_DMA6ADDRLOW, val) +#define bfin_read_USB_DMA6ADDRHIGH() bfin_read16(USB_DMA6ADDRHIGH) +#define bfin_write_USB_DMA6ADDRHIGH(val) bfin_write16(USB_DMA6ADDRHIGH, val) +#define bfin_read_USB_DMA6COUNTLOW() bfin_read16(USB_DMA6COUNTLOW) +#define bfin_write_USB_DMA6COUNTLOW(val) bfin_write16(USB_DMA6COUNTLOW, val) +#define bfin_read_USB_DMA6COUNTHIGH() bfin_read16(USB_DMA6COUNTHIGH) +#define bfin_write_USB_DMA6COUNTHIGH(val) bfin_write16(USB_DMA6COUNTHIGH, val) + +/* USB Channel 7 Config Registers */ + +#define bfin_read_USB_DMA7CONTROL() bfin_read16(USB_DMA7CONTROL) +#define bfin_write_USB_DMA7CONTROL(val) bfin_write16(USB_DMA7CONTROL, val) +#define bfin_read_USB_DMA7ADDRLOW() bfin_read16(USB_DMA7ADDRLOW) +#define bfin_write_USB_DMA7ADDRLOW(val) bfin_write16(USB_DMA7ADDRLOW, val) +#define bfin_read_USB_DMA7ADDRHIGH() bfin_read16(USB_DMA7ADDRHIGH) +#define bfin_write_USB_DMA7ADDRHIGH(val) bfin_write16(USB_DMA7ADDRHIGH, val) +#define bfin_read_USB_DMA7COUNTLOW() bfin_read16(USB_DMA7COUNTLOW) +#define bfin_write_USB_DMA7COUNTLOW(val) bfin_write16(USB_DMA7COUNTLOW, val) +#define bfin_read_USB_DMA7COUNTHIGH() bfin_read16(USB_DMA7COUNTHIGH) +#define bfin_write_USB_DMA7COUNTHIGH(val) bfin_write16(USB_DMA7COUNTHIGH, val) + +#endif /* _CDEF_BF527_H */ diff --git a/include/asm-blackfin/mach-bf527/cdefBF52x_base.h b/include/asm-blackfin/mach-bf527/cdefBF52x_base.h new file mode 100644 index 00000000000000..5f801a0ef7979d --- /dev/null +++ b/include/asm-blackfin/mach-bf527/cdefBF52x_base.h @@ -0,0 +1,1187 @@ +/* + * File: include/asm-blackfin/mach-bf527/cdefBF52x_base.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _CDEF_BF52X_H + +#include "defBF52x_base.h" + +/* ==== begin from cdefBF534.h ==== */ + +/* Clock and System Control (0xFFC00000 - 0xFFC000FF) */ +#define bfin_read_PLL_CTL() bfin_read16(PLL_CTL) +#define bfin_write_PLL_CTL(val) bfin_write16(PLL_CTL, val) +#define bfin_read_PLL_DIV() bfin_read16(PLL_DIV) +#define bfin_write_PLL_DIV(val) bfin_write16(PLL_DIV, val) +#define bfin_read_VR_CTL() bfin_read16(VR_CTL) +#define bfin_write_VR_CTL(val) bfin_write16(VR_CTL, val) +#define bfin_read_PLL_STAT() bfin_read16(PLL_STAT) +#define bfin_write_PLL_STAT(val) bfin_write16(PLL_STAT, val) +#define bfin_read_PLL_LOCKCNT() bfin_read16(PLL_LOCKCNT) +#define bfin_write_PLL_LOCKCNT(val) bfin_write16(PLL_LOCKCNT, val) +#define bfin_read_CHIPID() bfin_read16(CHIPID) +#define bfin_write_CHIPID(val) bfin_write16(CHIPID, val) + + +/* System Interrupt Controller (0xFFC00100 - 0xFFC001FF) */ +#define bfin_read_SWRST() bfin_read16(SWRST) +#define bfin_write_SWRST(val) bfin_write16(SWRST, val) +#define bfin_read_SYSCR() bfin_read16(SYSCR) +#define bfin_write_SYSCR(val) bfin_write16(SYSCR, val) + +#define bfin_read_SIC_RVECT() bfin_read32(SIC_RVECT) +#define bfin_write_SIC_RVECT(val) bfin_write32(SIC_RVECT, val) +#define bfin_read_SIC_IMASK0() bfin_read32(SIC_IMASK0) +#define bfin_write_SIC_IMASK0(val) bfin_write32(SIC_IMASK0, val) +/* legacy register name (below) provided for backwards code compatibility */ +#define bfin_read_SIC_IMASK() bfin_read32(SIC_IMASK) +#define bfin_write_SIC_IMASK(val) bfin_write32(SIC_IMASK, val) + +#define bfin_read_SIC_IAR0() bfin_read32(SIC_IAR0) +#define bfin_write_SIC_IAR0(val) bfin_write32(SIC_IAR0, val) +#define bfin_read_SIC_IAR1() bfin_read32(SIC_IAR1) +#define bfin_write_SIC_IAR1(val) bfin_write32(SIC_IAR1, val) +#define bfin_read_SIC_IAR2() bfin_read32(SIC_IAR2) +#define bfin_write_SIC_IAR2(val) bfin_write32(SIC_IAR2, val) +#define bfin_read_SIC_IAR3() bfin_read32(SIC_IAR3) +#define bfin_write_SIC_IAR3(val) bfin_write32(SIC_IAR3, val) + +#define bfin_read_SIC_ISR0() bfin_read32(SIC_ISR0) +#define bfin_write_SIC_ISR0(val) bfin_write32(SIC_ISR0, val) +/* legacy register name (below) provided for backwards code compatibility */ +#define bfin_read_SIC_ISR() bfin_read32(SIC_ISR) +#define bfin_write_SIC_ISR(val) bfin_write32(SIC_ISR, val) + +#define bfin_read_SIC_IWR0() bfin_read32(SIC_IWR0) +#define bfin_write_SIC_IWR0(val) bfin_write32(SIC_IWR0, val) +/* legacy register name (below) provided for backwards code compatibility */ +#define bfin_read_SIC_IWR() bfin_read32(SIC_IWR) +#define bfin_write_SIC_IWR(val) bfin_write32(SIC_IWR, val) + +/* SIC Additions to ADSP-BF52x (0xFFC0014C - 0xFFC00162) */ + +#define bfin_read_SIC_IMASK1() bfin_read32(SIC_IMASK1) +#define bfin_write_SIC_IMASK1(val) bfin_write32(SIC_IMASK1, val) +#define bfin_read_SIC_IAR4() bfin_read32(SIC_IAR4) +#define bfin_write_SIC_IAR4(val) bfin_write32(SIC_IAR4, val) +#define bfin_read_SIC_IAR5() bfin_read32(SIC_IAR5) +#define bfin_write_SIC_IAR5(val) bfin_write32(SIC_IAR5, val) +#define bfin_read_SIC_IAR6() bfin_read32(SIC_IAR6) +#define bfin_write_SIC_IAR6(val) bfin_write32(SIC_IAR6, val) +#define bfin_read_SIC_IAR7() bfin_read32(SIC_IAR7) +#define bfin_write_SIC_IAR7(val) bfin_write32(SIC_IAR7, val) +#define bfin_read_SIC_ISR1() bfin_read32(SIC_ISR1) +#define bfin_write_SIC_ISR1(val) bfin_write32(SIC_ISR1, val) +#define bfin_read_SIC_IWR1() bfin_read32(SIC_IWR1) +#define bfin_write_SIC_IWR1(val) bfin_write32(SIC_IWR1, val) + +/* Watchdog Timer (0xFFC00200 - 0xFFC002FF) */ +#define bfin_read_WDOG_CTL() bfin_read16(WDOG_CTL) +#define bfin_write_WDOG_CTL(val) bfin_write16(WDOG_CTL, val) +#define bfin_read_WDOG_CNT() bfin_read32(WDOG_CNT) +#define bfin_write_WDOG_CNT(val) bfin_write32(WDOG_CNT, val) +#define bfin_read_WDOG_STAT() bfin_read32(WDOG_STAT) +#define bfin_write_WDOG_STAT(val) bfin_write32(WDOG_STAT, val) + + +/* Real Time Clock (0xFFC00300 - 0xFFC003FF) */ +#define bfin_read_RTC_STAT() bfin_read32(RTC_STAT) +#define bfin_write_RTC_STAT(val) bfin_write32(RTC_STAT, val) +#define bfin_read_RTC_ICTL() bfin_read16(RTC_ICTL) +#define bfin_write_RTC_ICTL(val) bfin_write16(RTC_ICTL, val) +#define bfin_read_RTC_ISTAT() bfin_read16(RTC_ISTAT) +#define bfin_write_RTC_ISTAT(val) bfin_write16(RTC_ISTAT, val) +#define bfin_read_RTC_SWCNT() bfin_read16(RTC_SWCNT) +#define bfin_write_RTC_SWCNT(val) bfin_write16(RTC_SWCNT, val) +#define bfin_read_RTC_ALARM() bfin_read32(RTC_ALARM) +#define bfin_write_RTC_ALARM(val) bfin_write32(RTC_ALARM, val) +#define bfin_read_RTC_FAST() bfin_read16(RTC_FAST) +#define bfin_write_RTC_FAST(val) bfin_write16(RTC_FAST, val) +#define bfin_read_RTC_PREN() bfin_read16(RTC_PREN) +#define bfin_write_RTC_PREN(val) bfin_write16(RTC_PREN, val) + + +/* UART0 Controller (0xFFC00400 - 0xFFC004FF) */ +#define bfin_read_UART0_THR() bfin_read16(UART0_THR) +#define bfin_write_UART0_THR(val) bfin_write16(UART0_THR, val) +#define bfin_read_UART0_RBR() bfin_read16(UART0_RBR) +#define bfin_write_UART0_RBR(val) bfin_write16(UART0_RBR, val) +#define bfin_read_UART0_DLL() bfin_read16(UART0_DLL) +#define bfin_write_UART0_DLL(val) bfin_write16(UART0_DLL, val) +#define bfin_read_UART0_IER() bfin_read16(UART0_IER) +#define bfin_write_UART0_IER(val) bfin_write16(UART0_IER, val) +#define bfin_read_UART0_DLH() bfin_read16(UART0_DLH) +#define bfin_write_UART0_DLH(val) bfin_write16(UART0_DLH, val) +#define bfin_read_UART0_IIR() bfin_read16(UART0_IIR) +#define bfin_write_UART0_IIR(val) bfin_write16(UART0_IIR, val) +#define bfin_read_UART0_LCR() bfin_read16(UART0_LCR) +#define bfin_write_UART0_LCR(val) bfin_write16(UART0_LCR, val) +#define bfin_read_UART0_MCR() bfin_read16(UART0_MCR) +#define bfin_write_UART0_MCR(val) bfin_write16(UART0_MCR, val) +#define bfin_read_UART0_LSR() bfin_read16(UART0_LSR) +#define bfin_write_UART0_LSR(val) bfin_write16(UART0_LSR, val) +#define bfin_read_UART0_MSR() bfin_read16(UART0_MSR) +#define bfin_write_UART0_MSR(val) bfin_write16(UART0_MSR, val) +#define bfin_read_UART0_SCR() bfin_read16(UART0_SCR) +#define bfin_write_UART0_SCR(val) bfin_write16(UART0_SCR, val) +#define bfin_read_UART0_GCTL() bfin_read16(UART0_GCTL) +#define bfin_write_UART0_GCTL(val) bfin_write16(UART0_GCTL, val) + + +/* SPI Controller (0xFFC00500 - 0xFFC005FF) */ +#define bfin_read_SPI_CTL() bfin_read16(SPI_CTL) +#define bfin_write_SPI_CTL(val) bfin_write16(SPI_CTL, val) +#define bfin_read_SPI_FLG() bfin_read16(SPI_FLG) +#define bfin_write_SPI_FLG(val) bfin_write16(SPI_FLG, val) +#define bfin_read_SPI_STAT() bfin_read16(SPI_STAT) +#define bfin_write_SPI_STAT(val) bfin_write16(SPI_STAT, val) +#define bfin_read_SPI_TDBR() bfin_read16(SPI_TDBR) +#define bfin_write_SPI_TDBR(val) bfin_write16(SPI_TDBR, val) +#define bfin_read_SPI_RDBR() bfin_read16(SPI_RDBR) +#define bfin_write_SPI_RDBR(val) bfin_write16(SPI_RDBR, val) +#define bfin_read_SPI_BAUD() bfin_read16(SPI_BAUD) +#define bfin_write_SPI_BAUD(val) bfin_write16(SPI_BAUD, val) +#define bfin_read_SPI_SHADOW() bfin_read16(SPI_SHADOW) +#define bfin_write_SPI_SHADOW(val) bfin_write16(SPI_SHADOW, val) + + +/* TIMER0-7 Registers (0xFFC00600 - 0xFFC006FF) */ +#define bfin_read_TIMER0_CONFIG() bfin_read16(TIMER0_CONFIG) +#define bfin_write_TIMER0_CONFIG(val) bfin_write16(TIMER0_CONFIG, val) +#define bfin_read_TIMER0_COUNTER() bfin_read32(TIMER0_COUNTER) +#define bfin_write_TIMER0_COUNTER(val) bfin_write32(TIMER0_COUNTER, val) +#define bfin_read_TIMER0_PERIOD() bfin_read32(TIMER0_PERIOD) +#define bfin_write_TIMER0_PERIOD(val) bfin_write32(TIMER0_PERIOD, val) +#define bfin_read_TIMER0_WIDTH() bfin_read32(TIMER0_WIDTH) +#define bfin_write_TIMER0_WIDTH(val) bfin_write32(TIMER0_WIDTH, val) + +#define bfin_read_TIMER1_CONFIG() bfin_read16(TIMER1_CONFIG) +#define bfin_write_TIMER1_CONFIG(val) bfin_write16(TIMER1_CONFIG, val) +#define bfin_read_TIMER1_COUNTER() bfin_read32(TIMER1_COUNTER) +#define bfin_write_TIMER1_COUNTER(val) bfin_write32(TIMER1_COUNTER, val) +#define bfin_read_TIMER1_PERIOD() bfin_read32(TIMER1_PERIOD) +#define bfin_write_TIMER1_PERIOD(val) bfin_write32(TIMER1_PERIOD, val) +#define bfin_read_TIMER1_WIDTH() bfin_read32(TIMER1_WIDTH) +#define bfin_write_TIMER1_WIDTH(val) bfin_write32(TIMER1_WIDTH, val) + +#define bfin_read_TIMER2_CONFIG() bfin_read16(TIMER2_CONFIG) +#define bfin_write_TIMER2_CONFIG(val) bfin_write16(TIMER2_CONFIG, val) +#define bfin_read_TIMER2_COUNTER() bfin_read32(TIMER2_COUNTER) +#define bfin_write_TIMER2_COUNTER(val) bfin_write32(TIMER2_COUNTER, val) +#define bfin_read_TIMER2_PERIOD() bfin_read32(TIMER2_PERIOD) +#define bfin_write_TIMER2_PERIOD(val) bfin_write32(TIMER2_PERIOD, val) +#define bfin_read_TIMER2_WIDTH() bfin_read32(TIMER2_WIDTH) +#define bfin_write_TIMER2_WIDTH(val) bfin_write32(TIMER2_WIDTH, val) + +#define bfin_read_TIMER3_CONFIG() bfin_read16(TIMER3_CONFIG) +#define bfin_write_TIMER3_CONFIG(val) bfin_write16(TIMER3_CONFIG, val) +#define bfin_read_TIMER3_COUNTER() bfin_read32(TIMER3_COUNTER) +#define bfin_write_TIMER3_COUNTER(val) bfin_write32(TIMER3_COUNTER, val) +#define bfin_read_TIMER3_PERIOD() bfin_read32(TIMER3_PERIOD) +#define bfin_write_TIMER3_PERIOD(val) bfin_write32(TIMER3_PERIOD, val) +#define bfin_read_TIMER3_WIDTH() bfin_read32(TIMER3_WIDTH) +#define bfin_write_TIMER3_WIDTH(val) bfin_write32(TIMER3_WIDTH, val) + +#define bfin_read_TIMER4_CONFIG() bfin_read16(TIMER4_CONFIG) +#define bfin_write_TIMER4_CONFIG(val) bfin_write16(TIMER4_CONFIG, val) +#define bfin_read_TIMER4_COUNTER() bfin_read32(TIMER4_COUNTER) +#define bfin_write_TIMER4_COUNTER(val) bfin_write32(TIMER4_COUNTER, val) +#define bfin_read_TIMER4_PERIOD() bfin_read32(TIMER4_PERIOD) +#define bfin_write_TIMER4_PERIOD(val) bfin_write32(TIMER4_PERIOD, val) +#define bfin_read_TIMER4_WIDTH() bfin_read32(TIMER4_WIDTH) +#define bfin_write_TIMER4_WIDTH(val) bfin_write32(TIMER4_WIDTH, val) + +#define bfin_read_TIMER5_CONFIG() bfin_read16(TIMER5_CONFIG) +#define bfin_write_TIMER5_CONFIG(val) bfin_write16(TIMER5_CONFIG, val) +#define bfin_read_TIMER5_COUNTER() bfin_read32(TIMER5_COUNTER) +#define bfin_write_TIMER5_COUNTER(val) bfin_write32(TIMER5_COUNTER, val) +#define bfin_read_TIMER5_PERIOD() bfin_read32(TIMER5_PERIOD) +#define bfin_write_TIMER5_PERIOD(val) bfin_write32(TIMER5_PERIOD, val) +#define bfin_read_TIMER5_WIDTH() bfin_read32(TIMER5_WIDTH) +#define bfin_write_TIMER5_WIDTH(val) bfin_write32(TIMER5_WIDTH, val) + +#define bfin_read_TIMER6_CONFIG() bfin_read16(TIMER6_CONFIG) +#define bfin_write_TIMER6_CONFIG(val) bfin_write16(TIMER6_CONFIG, val) +#define bfin_read_TIMER6_COUNTER() bfin_read32(TIMER6_COUNTER) +#define bfin_write_TIMER6_COUNTER(val) bfin_write32(TIMER6_COUNTER, val) +#define bfin_read_TIMER6_PERIOD() bfin_read32(TIMER6_PERIOD) +#define bfin_write_TIMER6_PERIOD(val) bfin_write32(TIMER6_PERIOD, val) +#define bfin_read_TIMER6_WIDTH() bfin_read32(TIMER6_WIDTH) +#define bfin_write_TIMER6_WIDTH(val) bfin_write32(TIMER6_WIDTH, val) + +#define bfin_read_TIMER7_CONFIG() bfin_read16(TIMER7_CONFIG) +#define bfin_write_TIMER7_CONFIG(val) bfin_write16(TIMER7_CONFIG, val) +#define bfin_read_TIMER7_COUNTER() bfin_read32(TIMER7_COUNTER) +#define bfin_write_TIMER7_COUNTER(val) bfin_write32(TIMER7_COUNTER, val) +#define bfin_read_TIMER7_PERIOD() bfin_read32(TIMER7_PERIOD) +#define bfin_write_TIMER7_PERIOD(val) bfin_write32(TIMER7_PERIOD, val) +#define bfin_read_TIMER7_WIDTH() bfin_read32(TIMER7_WIDTH) +#define bfin_write_TIMER7_WIDTH(val) bfin_write32(TIMER7_WIDTH, val) + +#define bfin_read_TIMER_ENABLE() bfin_read16(TIMER_ENABLE) +#define bfin_write_TIMER_ENABLE(val) bfin_write16(TIMER_ENABLE, val) +#define bfin_read_TIMER_DISABLE() bfin_read16(TIMER_DISABLE) +#define bfin_write_TIMER_DISABLE(val) bfin_write16(TIMER_DISABLE, val) +#define bfin_read_TIMER_STATUS() bfin_read32(TIMER_STATUS) +#define bfin_write_TIMER_STATUS(val) bfin_write32(TIMER_STATUS, val) + + +/* General Purpose I/O Port F (0xFFC00700 - 0xFFC007FF) */ +#define bfin_read_PORTFIO() bfin_read16(PORTFIO) +#define bfin_write_PORTFIO(val) bfin_write16(PORTFIO, val) +#define bfin_read_PORTFIO_CLEAR() bfin_read16(PORTFIO_CLEAR) +#define bfin_write_PORTFIO_CLEAR(val) bfin_write16(PORTFIO_CLEAR, val) +#define bfin_read_PORTFIO_SET() bfin_read16(PORTFIO_SET) +#define bfin_write_PORTFIO_SET(val) bfin_write16(PORTFIO_SET, val) +#define bfin_read_PORTFIO_TOGGLE() bfin_read16(PORTFIO_TOGGLE) +#define bfin_write_PORTFIO_TOGGLE(val) bfin_write16(PORTFIO_TOGGLE, val) +#define bfin_read_PORTFIO_MASKA() bfin_read16(PORTFIO_MASKA) +#define bfin_write_PORTFIO_MASKA(val) bfin_write16(PORTFIO_MASKA, val) +#define bfin_read_PORTFIO_MASKA_CLEAR() bfin_read16(PORTFIO_MASKA_CLEAR) +#define bfin_write_PORTFIO_MASKA_CLEAR(val) bfin_write16(PORTFIO_MASKA_CLEAR, val) +#define bfin_read_PORTFIO_MASKA_SET() bfin_read16(PORTFIO_MASKA_SET) +#define bfin_write_PORTFIO_MASKA_SET(val) bfin_write16(PORTFIO_MASKA_SET, val) +#define bfin_read_PORTFIO_MASKA_TOGGLE() bfin_read16(PORTFIO_MASKA_TOGGLE) +#define bfin_write_PORTFIO_MASKA_TOGGLE(val) bfin_write16(PORTFIO_MASKA_TOGGLE, val) +#define bfin_read_PORTFIO_MASKB() bfin_read16(PORTFIO_MASKB) +#define bfin_write_PORTFIO_MASKB(val) bfin_write16(PORTFIO_MASKB, val) +#define bfin_read_PORTFIO_MASKB_CLEAR() bfin_read16(PORTFIO_MASKB_CLEAR) +#define bfin_write_PORTFIO_MASKB_CLEAR(val) bfin_write16(PORTFIO_MASKB_CLEAR, val) +#define bfin_read_PORTFIO_MASKB_SET() bfin_read16(PORTFIO_MASKB_SET) +#define bfin_write_PORTFIO_MASKB_SET(val) bfin_write16(PORTFIO_MASKB_SET, val) +#define bfin_read_PORTFIO_MASKB_TOGGLE() bfin_read16(PORTFIO_MASKB_TOGGLE) +#define bfin_write_PORTFIO_MASKB_TOGGLE(val) bfin_write16(PORTFIO_MASKB_TOGGLE, val) +#define bfin_read_PORTFIO_DIR() bfin_read16(PORTFIO_DIR) +#define bfin_write_PORTFIO_DIR(val) bfin_write16(PORTFIO_DIR, val) +#define bfin_read_PORTFIO_POLAR() bfin_read16(PORTFIO_POLAR) +#define bfin_write_PORTFIO_POLAR(val) bfin_write16(PORTFIO_POLAR, val) +#define bfin_read_PORTFIO_EDGE() bfin_read16(PORTFIO_EDGE) +#define bfin_write_PORTFIO_EDGE(val) bfin_write16(PORTFIO_EDGE, val) +#define bfin_read_PORTFIO_BOTH() bfin_read16(PORTFIO_BOTH) +#define bfin_write_PORTFIO_BOTH(val) bfin_write16(PORTFIO_BOTH, val) +#define bfin_read_PORTFIO_INEN() bfin_read16(PORTFIO_INEN) +#define bfin_write_PORTFIO_INEN(val) bfin_write16(PORTFIO_INEN, val) + + +/* SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */ +#define bfin_read_SPORT0_TCR1() bfin_read16(SPORT0_TCR1) +#define bfin_write_SPORT0_TCR1(val) bfin_write16(SPORT0_TCR1, val) +#define bfin_read_SPORT0_TCR2() bfin_read16(SPORT0_TCR2) +#define bfin_write_SPORT0_TCR2(val) bfin_write16(SPORT0_TCR2, val) +#define bfin_read_SPORT0_TCLKDIV() bfin_read16(SPORT0_TCLKDIV) +#define bfin_write_SPORT0_TCLKDIV(val) bfin_write16(SPORT0_TCLKDIV, val) +#define bfin_read_SPORT0_TFSDIV() bfin_read16(SPORT0_TFSDIV) +#define bfin_write_SPORT0_TFSDIV(val) bfin_write16(SPORT0_TFSDIV, val) +#define bfin_read_SPORT0_TX() bfin_read32(SPORT0_TX) +#define bfin_write_SPORT0_TX(val) bfin_write32(SPORT0_TX, val) +#define bfin_read_SPORT0_RX() bfin_read32(SPORT0_RX) +#define bfin_write_SPORT0_RX(val) bfin_write32(SPORT0_RX, val) +#define bfin_read_SPORT0_TX32() bfin_read32(SPORT0_TX32) +#define bfin_write_SPORT0_TX32(val) bfin_write32(SPORT0_TX32, val) +#define bfin_read_SPORT0_RX32() bfin_read32(SPORT0_RX32) +#define bfin_write_SPORT0_RX32(val) bfin_write32(SPORT0_RX32, val) +#define bfin_read_SPORT0_TX16() bfin_read16(SPORT0_TX16) +#define bfin_write_SPORT0_TX16(val) bfin_write16(SPORT0_TX16, val) +#define bfin_read_SPORT0_RX16() bfin_read16(SPORT0_RX16) +#define bfin_write_SPORT0_RX16(val) bfin_write16(SPORT0_RX16, val) +#define bfin_read_SPORT0_RCR1() bfin_read16(SPORT0_RCR1) +#define bfin_write_SPORT0_RCR1(val) bfin_write16(SPORT0_RCR1, val) +#define bfin_read_SPORT0_RCR2() bfin_read16(SPORT0_RCR2) +#define bfin_write_SPORT0_RCR2(val) bfin_write16(SPORT0_RCR2, val) +#define bfin_read_SPORT0_RCLKDIV() bfin_read16(SPORT0_RCLKDIV) +#define bfin_write_SPORT0_RCLKDIV(val) bfin_write16(SPORT0_RCLKDIV, val) +#define bfin_read_SPORT0_RFSDIV() bfin_read16(SPORT0_RFSDIV) +#define bfin_write_SPORT0_RFSDIV(val) bfin_write16(SPORT0_RFSDIV, val) +#define bfin_read_SPORT0_STAT() bfin_read16(SPORT0_STAT) +#define bfin_write_SPORT0_STAT(val) bfin_write16(SPORT0_STAT, val) +#define bfin_read_SPORT0_CHNL() bfin_read16(SPORT0_CHNL) +#define bfin_write_SPORT0_CHNL(val) bfin_write16(SPORT0_CHNL, val) +#define bfin_read_SPORT0_MCMC1() bfin_read16(SPORT0_MCMC1) +#define bfin_write_SPORT0_MCMC1(val) bfin_write16(SPORT0_MCMC1, val) +#define bfin_read_SPORT0_MCMC2() bfin_read16(SPORT0_MCMC2) +#define bfin_write_SPORT0_MCMC2(val) bfin_write16(SPORT0_MCMC2, val) +#define bfin_read_SPORT0_MTCS0() bfin_read32(SPORT0_MTCS0) +#define bfin_write_SPORT0_MTCS0(val) bfin_write32(SPORT0_MTCS0, val) +#define bfin_read_SPORT0_MTCS1() bfin_read32(SPORT0_MTCS1) +#define bfin_write_SPORT0_MTCS1(val) bfin_write32(SPORT0_MTCS1, val) +#define bfin_read_SPORT0_MTCS2() bfin_read32(SPORT0_MTCS2) +#define bfin_write_SPORT0_MTCS2(val) bfin_write32(SPORT0_MTCS2, val) +#define bfin_read_SPORT0_MTCS3() bfin_read32(SPORT0_MTCS3) +#define bfin_write_SPORT0_MTCS3(val) bfin_write32(SPORT0_MTCS3, val) +#define bfin_read_SPORT0_MRCS0() bfin_read32(SPORT0_MRCS0) +#define bfin_write_SPORT0_MRCS0(val) bfin_write32(SPORT0_MRCS0, val) +#define bfin_read_SPORT0_MRCS1() bfin_read32(SPORT0_MRCS1) +#define bfin_write_SPORT0_MRCS1(val) bfin_write32(SPORT0_MRCS1, val) +#define bfin_read_SPORT0_MRCS2() bfin_read32(SPORT0_MRCS2) +#define bfin_write_SPORT0_MRCS2(val) bfin_write32(SPORT0_MRCS2, val) +#define bfin_read_SPORT0_MRCS3() bfin_read32(SPORT0_MRCS3) +#define bfin_write_SPORT0_MRCS3(val) bfin_write32(SPORT0_MRCS3, val) + + +/* SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */ +#define bfin_read_SPORT1_TCR1() bfin_read16(SPORT1_TCR1) +#define bfin_write_SPORT1_TCR1(val) bfin_write16(SPORT1_TCR1, val) +#define bfin_read_SPORT1_TCR2() bfin_read16(SPORT1_TCR2) +#define bfin_write_SPORT1_TCR2(val) bfin_write16(SPORT1_TCR2, val) +#define bfin_read_SPORT1_TCLKDIV() bfin_read16(SPORT1_TCLKDIV) +#define bfin_write_SPORT1_TCLKDIV(val) bfin_write16(SPORT1_TCLKDIV, val) +#define bfin_read_SPORT1_TFSDIV() bfin_read16(SPORT1_TFSDIV) +#define bfin_write_SPORT1_TFSDIV(val) bfin_write16(SPORT1_TFSDIV, val) +#define bfin_read_SPORT1_TX() bfin_read32(SPORT1_TX) +#define bfin_write_SPORT1_TX(val) bfin_write32(SPORT1_TX, val) +#define bfin_read_SPORT1_RX() bfin_read32(SPORT1_RX) +#define bfin_write_SPORT1_RX(val) bfin_write32(SPORT1_RX, val) +#define bfin_read_SPORT1_TX32() bfin_read32(SPORT1_TX32) +#define bfin_write_SPORT1_TX32(val) bfin_write32(SPORT1_TX32, val) +#define bfin_read_SPORT1_RX32() bfin_read32(SPORT1_RX32) +#define bfin_write_SPORT1_RX32(val) bfin_write32(SPORT1_RX32, val) +#define bfin_read_SPORT1_TX16() bfin_read16(SPORT1_TX16) +#define bfin_write_SPORT1_TX16(val) bfin_write16(SPORT1_TX16, val) +#define bfin_read_SPORT1_RX16() bfin_read16(SPORT1_RX16) +#define bfin_write_SPORT1_RX16(val) bfin_write16(SPORT1_RX16, val) +#define bfin_read_SPORT1_RCR1() bfin_read16(SPORT1_RCR1) +#define bfin_write_SPORT1_RCR1(val) bfin_write16(SPORT1_RCR1, val) +#define bfin_read_SPORT1_RCR2() bfin_read16(SPORT1_RCR2) +#define bfin_write_SPORT1_RCR2(val) bfin_write16(SPORT1_RCR2, val) +#define bfin_read_SPORT1_RCLKDIV() bfin_read16(SPORT1_RCLKDIV) +#define bfin_write_SPORT1_RCLKDIV(val) bfin_write16(SPORT1_RCLKDIV, val) +#define bfin_read_SPORT1_RFSDIV() bfin_read16(SPORT1_RFSDIV) +#define bfin_write_SPORT1_RFSDIV(val) bfin_write16(SPORT1_RFSDIV, val) +#define bfin_read_SPORT1_STAT() bfin_read16(SPORT1_STAT) +#define bfin_write_SPORT1_STAT(val) bfin_write16(SPORT1_STAT, val) +#define bfin_read_SPORT1_CHNL() bfin_read16(SPORT1_CHNL) +#define bfin_write_SPORT1_CHNL(val) bfin_write16(SPORT1_CHNL, val) +#define bfin_read_SPORT1_MCMC1() bfin_read16(SPORT1_MCMC1) +#define bfin_write_SPORT1_MCMC1(val) bfin_write16(SPORT1_MCMC1, val) +#define bfin_read_SPORT1_MCMC2() bfin_read16(SPORT1_MCMC2) +#define bfin_write_SPORT1_MCMC2(val) bfin_write16(SPORT1_MCMC2, val) +#define bfin_read_SPORT1_MTCS0() bfin_read32(SPORT1_MTCS0) +#define bfin_write_SPORT1_MTCS0(val) bfin_write32(SPORT1_MTCS0, val) +#define bfin_read_SPORT1_MTCS1() bfin_read32(SPORT1_MTCS1) +#define bfin_write_SPORT1_MTCS1(val) bfin_write32(SPORT1_MTCS1, val) +#define bfin_read_SPORT1_MTCS2() bfin_read32(SPORT1_MTCS2) +#define bfin_write_SPORT1_MTCS2(val) bfin_write32(SPORT1_MTCS2, val) +#define bfin_read_SPORT1_MTCS3() bfin_read32(SPORT1_MTCS3) +#define bfin_write_SPORT1_MTCS3(val) bfin_write32(SPORT1_MTCS3, val) +#define bfin_read_SPORT1_MRCS0() bfin_read32(SPORT1_MRCS0) +#define bfin_write_SPORT1_MRCS0(val) bfin_write32(SPORT1_MRCS0, val) +#define bfin_read_SPORT1_MRCS1() bfin_read32(SPORT1_MRCS1) +#define bfin_write_SPORT1_MRCS1(val) bfin_write32(SPORT1_MRCS1, val) +#define bfin_read_SPORT1_MRCS2() bfin_read32(SPORT1_MRCS2) +#define bfin_write_SPORT1_MRCS2(val) bfin_write32(SPORT1_MRCS2, val) +#define bfin_read_SPORT1_MRCS3() bfin_read32(SPORT1_MRCS3) +#define bfin_write_SPORT1_MRCS3(val) bfin_write32(SPORT1_MRCS3, val) + + +/* External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF) */ +#define bfin_read_EBIU_AMGCTL() bfin_read16(EBIU_AMGCTL) +#define bfin_write_EBIU_AMGCTL(val) bfin_write16(EBIU_AMGCTL, val) +#define bfin_read_EBIU_AMBCTL0() bfin_read32(EBIU_AMBCTL0) +#define bfin_write_EBIU_AMBCTL0(val) bfin_write32(EBIU_AMBCTL0, val) +#define bfin_read_EBIU_AMBCTL1() bfin_read32(EBIU_AMBCTL1) +#define bfin_write_EBIU_AMBCTL1(val) bfin_write32(EBIU_AMBCTL1, val) +#define bfin_read_EBIU_SDGCTL() bfin_read32(EBIU_SDGCTL) +#define bfin_write_EBIU_SDGCTL(val) bfin_write32(EBIU_SDGCTL, val) +#define bfin_read_EBIU_SDBCTL() bfin_read16(EBIU_SDBCTL) +#define bfin_write_EBIU_SDBCTL(val) bfin_write16(EBIU_SDBCTL, val) +#define bfin_read_EBIU_SDRRC() bfin_read16(EBIU_SDRRC) +#define bfin_write_EBIU_SDRRC(val) bfin_write16(EBIU_SDRRC, val) +#define bfin_read_EBIU_SDSTAT() bfin_read16(EBIU_SDSTAT) +#define bfin_write_EBIU_SDSTAT(val) bfin_write16(EBIU_SDSTAT, val) + + +/* DMA Traffic Control Registers */ +#define bfin_read_DMA_TC_PER() bfin_read16(DMA_TC_PER) +#define bfin_write_DMA_TC_PER(val) bfin_write16(DMA_TC_PER, val) +#define bfin_read_DMA_TC_CNT() bfin_read16(DMA_TC_CNT) +#define bfin_write_DMA_TC_CNT(val) bfin_write16(DMA_TC_CNT, val) + +/* Alternate deprecated register names (below) provided for backwards code compatibility */ +#define bfin_read_DMA_TCPER() bfin_read16(DMA_TCPER) +#define bfin_write_DMA_TCPER(val) bfin_write16(DMA_TCPER, val) +#define bfin_read_DMA_TCCNT() bfin_read16(DMA_TCCNT) +#define bfin_write_DMA_TCCNT(val) bfin_write16(DMA_TCCNT, val) + +/* DMA Controller */ +#define bfin_read_DMA0_CONFIG() bfin_read16(DMA0_CONFIG) +#define bfin_write_DMA0_CONFIG(val) bfin_write16(DMA0_CONFIG, val) +#define bfin_read_DMA0_NEXT_DESC_PTR() bfin_read32(DMA0_NEXT_DESC_PTR) +#define bfin_write_DMA0_NEXT_DESC_PTR(val) bfin_write32(DMA0_NEXT_DESC_PTR, val) +#define bfin_read_DMA0_START_ADDR() bfin_read32(DMA0_START_ADDR) +#define bfin_write_DMA0_START_ADDR(val) bfin_write32(DMA0_START_ADDR, val) +#define bfin_read_DMA0_X_COUNT() bfin_read16(DMA0_X_COUNT) +#define bfin_write_DMA0_X_COUNT(val) bfin_write16(DMA0_X_COUNT, val) +#define bfin_read_DMA0_Y_COUNT() bfin_read16(DMA0_Y_COUNT) +#define bfin_write_DMA0_Y_COUNT(val) bfin_write16(DMA0_Y_COUNT, val) +#define bfin_read_DMA0_X_MODIFY() bfin_read16(DMA0_X_MODIFY) +#define bfin_write_DMA0_X_MODIFY(val) bfin_write16(DMA0_X_MODIFY, val) +#define bfin_read_DMA0_Y_MODIFY() bfin_read16(DMA0_Y_MODIFY) +#define bfin_write_DMA0_Y_MODIFY(val) bfin_write16(DMA0_Y_MODIFY, val) +#define bfin_read_DMA0_CURR_DESC_PTR() bfin_read32(DMA0_CURR_DESC_PTR) +#define bfin_write_DMA0_CURR_DESC_PTR(val) bfin_write32(DMA0_CURR_DESC_PTR, val) +#define bfin_read_DMA0_CURR_ADDR() bfin_read32(DMA0_CURR_ADDR) +#define bfin_write_DMA0_CURR_ADDR(val) bfin_write32(DMA0_CURR_ADDR, val) +#define bfin_read_DMA0_CURR_X_COUNT() bfin_read16(DMA0_CURR_X_COUNT) +#define bfin_write_DMA0_CURR_X_COUNT(val) bfin_write16(DMA0_CURR_X_COUNT, val) +#define bfin_read_DMA0_CURR_Y_COUNT() bfin_read16(DMA0_CURR_Y_COUNT) +#define bfin_write_DMA0_CURR_Y_COUNT(val) bfin_write16(DMA0_CURR_Y_COUNT, val) +#define bfin_read_DMA0_IRQ_STATUS() bfin_read16(DMA0_IRQ_STATUS) +#define bfin_write_DMA0_IRQ_STATUS(val) bfin_write16(DMA0_IRQ_STATUS, val) +#define bfin_read_DMA0_PERIPHERAL_MAP() bfin_read16(DMA0_PERIPHERAL_MAP) +#define bfin_write_DMA0_PERIPHERAL_MAP(val) bfin_write16(DMA0_PERIPHERAL_MAP, val) + +#define bfin_read_DMA1_CONFIG() bfin_read16(DMA1_CONFIG) +#define bfin_write_DMA1_CONFIG(val) bfin_write16(DMA1_CONFIG, val) +#define bfin_read_DMA1_NEXT_DESC_PTR() bfin_read32(DMA1_NEXT_DESC_PTR) +#define bfin_write_DMA1_NEXT_DESC_PTR(val) bfin_write32(DMA1_NEXT_DESC_PTR, val) +#define bfin_read_DMA1_START_ADDR() bfin_read32(DMA1_START_ADDR) +#define bfin_write_DMA1_START_ADDR(val) bfin_write32(DMA1_START_ADDR, val) +#define bfin_read_DMA1_X_COUNT() bfin_read16(DMA1_X_COUNT) +#define bfin_write_DMA1_X_COUNT(val) bfin_write16(DMA1_X_COUNT, val) +#define bfin_read_DMA1_Y_COUNT() bfin_read16(DMA1_Y_COUNT) +#define bfin_write_DMA1_Y_COUNT(val) bfin_write16(DMA1_Y_COUNT, val) +#define bfin_read_DMA1_X_MODIFY() bfin_read16(DMA1_X_MODIFY) +#define bfin_write_DMA1_X_MODIFY(val) bfin_write16(DMA1_X_MODIFY, val) +#define bfin_read_DMA1_Y_MODIFY() bfin_read16(DMA1_Y_MODIFY) +#define bfin_write_DMA1_Y_MODIFY(val) bfin_write16(DMA1_Y_MODIFY, val) +#define bfin_read_DMA1_CURR_DESC_PTR() bfin_read32(DMA1_CURR_DESC_PTR) +#define bfin_write_DMA1_CURR_DESC_PTR(val) bfin_write32(DMA1_CURR_DESC_PTR, val) +#define bfin_read_DMA1_CURR_ADDR() bfin_read32(DMA1_CURR_ADDR) +#define bfin_write_DMA1_CURR_ADDR(val) bfin_write32(DMA1_CURR_ADDR, val) +#define bfin_read_DMA1_CURR_X_COUNT() bfin_read16(DMA1_CURR_X_COUNT) +#define bfin_write_DMA1_CURR_X_COUNT(val) bfin_write16(DMA1_CURR_X_COUNT, val) +#define bfin_read_DMA1_CURR_Y_COUNT() bfin_read16(DMA1_CURR_Y_COUNT) +#define bfin_write_DMA1_CURR_Y_COUNT(val) bfin_write16(DMA1_CURR_Y_COUNT, val) +#define bfin_read_DMA1_IRQ_STATUS() bfin_read16(DMA1_IRQ_STATUS) +#define bfin_write_DMA1_IRQ_STATUS(val) bfin_write16(DMA1_IRQ_STATUS, val) +#define bfin_read_DMA1_PERIPHERAL_MAP() bfin_read16(DMA1_PERIPHERAL_MAP) +#define bfin_write_DMA1_PERIPHERAL_MAP(val) bfin_write16(DMA1_PERIPHERAL_MAP, val) + +#define bfin_read_DMA2_CONFIG() bfin_read16(DMA2_CONFIG) +#define bfin_write_DMA2_CONFIG(val) bfin_write16(DMA2_CONFIG, val) +#define bfin_read_DMA2_NEXT_DESC_PTR() bfin_read32(DMA2_NEXT_DESC_PTR) +#define bfin_write_DMA2_NEXT_DESC_PTR(val) bfin_write32(DMA2_NEXT_DESC_PTR, val) +#define bfin_read_DMA2_START_ADDR() bfin_read32(DMA2_START_ADDR) +#define bfin_write_DMA2_START_ADDR(val) bfin_write32(DMA2_START_ADDR, val) +#define bfin_read_DMA2_X_COUNT() bfin_read16(DMA2_X_COUNT) +#define bfin_write_DMA2_X_COUNT(val) bfin_write16(DMA2_X_COUNT, val) +#define bfin_read_DMA2_Y_COUNT() bfin_read16(DMA2_Y_COUNT) +#define bfin_write_DMA2_Y_COUNT(val) bfin_write16(DMA2_Y_COUNT, val) +#define bfin_read_DMA2_X_MODIFY() bfin_read16(DMA2_X_MODIFY) +#define bfin_write_DMA2_X_MODIFY(val) bfin_write16(DMA2_X_MODIFY, val) +#define bfin_read_DMA2_Y_MODIFY() bfin_read16(DMA2_Y_MODIFY) +#define bfin_write_DMA2_Y_MODIFY(val) bfin_write16(DMA2_Y_MODIFY, val) +#define bfin_read_DMA2_CURR_DESC_PTR() bfin_read32(DMA2_CURR_DESC_PTR) +#define bfin_write_DMA2_CURR_DESC_PTR(val) bfin_write32(DMA2_CURR_DESC_PTR, val) +#define bfin_read_DMA2_CURR_ADDR() bfin_read32(DMA2_CURR_ADDR) +#define bfin_write_DMA2_CURR_ADDR(val) bfin_write32(DMA2_CURR_ADDR, val) +#define bfin_read_DMA2_CURR_X_COUNT() bfin_read16(DMA2_CURR_X_COUNT) +#define bfin_write_DMA2_CURR_X_COUNT(val) bfin_write16(DMA2_CURR_X_COUNT, val) +#define bfin_read_DMA2_CURR_Y_COUNT() bfin_read16(DMA2_CURR_Y_COUNT) +#define bfin_write_DMA2_CURR_Y_COUNT(val) bfin_write16(DMA2_CURR_Y_COUNT, val) +#define bfin_read_DMA2_IRQ_STATUS() bfin_read16(DMA2_IRQ_STATUS) +#define bfin_write_DMA2_IRQ_STATUS(val) bfin_write16(DMA2_IRQ_STATUS, val) +#define bfin_read_DMA2_PERIPHERAL_MAP() bfin_read16(DMA2_PERIPHERAL_MAP) +#define bfin_write_DMA2_PERIPHERAL_MAP(val) bfin_write16(DMA2_PERIPHERAL_MAP, val) + +#define bfin_read_DMA3_CONFIG() bfin_read16(DMA3_CONFIG) +#define bfin_write_DMA3_CONFIG(val) bfin_write16(DMA3_CONFIG, val) +#define bfin_read_DMA3_NEXT_DESC_PTR() bfin_read32(DMA3_NEXT_DESC_PTR) +#define bfin_write_DMA3_NEXT_DESC_PTR(val) bfin_write32(DMA3_NEXT_DESC_PTR, val) +#define bfin_read_DMA3_START_ADDR() bfin_read32(DMA3_START_ADDR) +#define bfin_write_DMA3_START_ADDR(val) bfin_write32(DMA3_START_ADDR, val) +#define bfin_read_DMA3_X_COUNT() bfin_read16(DMA3_X_COUNT) +#define bfin_write_DMA3_X_COUNT(val) bfin_write16(DMA3_X_COUNT, val) +#define bfin_read_DMA3_Y_COUNT() bfin_read16(DMA3_Y_COUNT) +#define bfin_write_DMA3_Y_COUNT(val) bfin_write16(DMA3_Y_COUNT, val) +#define bfin_read_DMA3_X_MODIFY() bfin_read16(DMA3_X_MODIFY) +#define bfin_write_DMA3_X_MODIFY(val) bfin_write16(DMA3_X_MODIFY, val) +#define bfin_read_DMA3_Y_MODIFY() bfin_read16(DMA3_Y_MODIFY) +#define bfin_write_DMA3_Y_MODIFY(val) bfin_write16(DMA3_Y_MODIFY, val) +#define bfin_read_DMA3_CURR_DESC_PTR() bfin_read32(DMA3_CURR_DESC_PTR) +#define bfin_write_DMA3_CURR_DESC_PTR(val) bfin_write32(DMA3_CURR_DESC_PTR, val) +#define bfin_read_DMA3_CURR_ADDR() bfin_read32(DMA3_CURR_ADDR) +#define bfin_write_DMA3_CURR_ADDR(val) bfin_write32(DMA3_CURR_ADDR, val) +#define bfin_read_DMA3_CURR_X_COUNT() bfin_read16(DMA3_CURR_X_COUNT) +#define bfin_write_DMA3_CURR_X_COUNT(val) bfin_write16(DMA3_CURR_X_COUNT, val) +#define bfin_read_DMA3_CURR_Y_COUNT() bfin_read16(DMA3_CURR_Y_COUNT) +#define bfin_write_DMA3_CURR_Y_COUNT(val) bfin_write16(DMA3_CURR_Y_COUNT, val) +#define bfin_read_DMA3_IRQ_STATUS() bfin_read16(DMA3_IRQ_STATUS) +#define bfin_write_DMA3_IRQ_STATUS(val) bfin_write16(DMA3_IRQ_STATUS, val) +#define bfin_read_DMA3_PERIPHERAL_MAP() bfin_read16(DMA3_PERIPHERAL_MAP) +#define bfin_write_DMA3_PERIPHERAL_MAP(val) bfin_write16(DMA3_PERIPHERAL_MAP, val) + +#define bfin_read_DMA4_CONFIG() bfin_read16(DMA4_CONFIG) +#define bfin_write_DMA4_CONFIG(val) bfin_write16(DMA4_CONFIG, val) +#define bfin_read_DMA4_NEXT_DESC_PTR() bfin_read32(DMA4_NEXT_DESC_PTR) +#define bfin_write_DMA4_NEXT_DESC_PTR(val) bfin_write32(DMA4_NEXT_DESC_PTR, val) +#define bfin_read_DMA4_START_ADDR() bfin_read32(DMA4_START_ADDR) +#define bfin_write_DMA4_START_ADDR(val) bfin_write32(DMA4_START_ADDR, val) +#define bfin_read_DMA4_X_COUNT() bfin_read16(DMA4_X_COUNT) +#define bfin_write_DMA4_X_COUNT(val) bfin_write16(DMA4_X_COUNT, val) +#define bfin_read_DMA4_Y_COUNT() bfin_read16(DMA4_Y_COUNT) +#define bfin_write_DMA4_Y_COUNT(val) bfin_write16(DMA4_Y_COUNT, val) +#define bfin_read_DMA4_X_MODIFY() bfin_read16(DMA4_X_MODIFY) +#define bfin_write_DMA4_X_MODIFY(val) bfin_write16(DMA4_X_MODIFY, val) +#define bfin_read_DMA4_Y_MODIFY() bfin_read16(DMA4_Y_MODIFY) +#define bfin_write_DMA4_Y_MODIFY(val) bfin_write16(DMA4_Y_MODIFY, val) +#define bfin_read_DMA4_CURR_DESC_PTR() bfin_read32(DMA4_CURR_DESC_PTR) +#define bfin_write_DMA4_CURR_DESC_PTR(val) bfin_write32(DMA4_CURR_DESC_PTR, val) +#define bfin_read_DMA4_CURR_ADDR() bfin_read32(DMA4_CURR_ADDR) +#define bfin_write_DMA4_CURR_ADDR(val) bfin_write32(DMA4_CURR_ADDR, val) +#define bfin_read_DMA4_CURR_X_COUNT() bfin_read16(DMA4_CURR_X_COUNT) +#define bfin_write_DMA4_CURR_X_COUNT(val) bfin_write16(DMA4_CURR_X_COUNT, val) +#define bfin_read_DMA4_CURR_Y_COUNT() bfin_read16(DMA4_CURR_Y_COUNT) +#define bfin_write_DMA4_CURR_Y_COUNT(val) bfin_write16(DMA4_CURR_Y_COUNT, val) +#define bfin_read_DMA4_IRQ_STATUS() bfin_read16(DMA4_IRQ_STATUS) +#define bfin_write_DMA4_IRQ_STATUS(val) bfin_write16(DMA4_IRQ_STATUS, val) +#define bfin_read_DMA4_PERIPHERAL_MAP() bfin_read16(DMA4_PERIPHERAL_MAP) +#define bfin_write_DMA4_PERIPHERAL_MAP(val) bfin_write16(DMA4_PERIPHERAL_MAP, val) + +#define bfin_read_DMA5_CONFIG() bfin_read16(DMA5_CONFIG) +#define bfin_write_DMA5_CONFIG(val) bfin_write16(DMA5_CONFIG, val) +#define bfin_read_DMA5_NEXT_DESC_PTR() bfin_read32(DMA5_NEXT_DESC_PTR) +#define bfin_write_DMA5_NEXT_DESC_PTR(val) bfin_write32(DMA5_NEXT_DESC_PTR, val) +#define bfin_read_DMA5_START_ADDR() bfin_read32(DMA5_START_ADDR) +#define bfin_write_DMA5_START_ADDR(val) bfin_write32(DMA5_START_ADDR, val) +#define bfin_read_DMA5_X_COUNT() bfin_read16(DMA5_X_COUNT) +#define bfin_write_DMA5_X_COUNT(val) bfin_write16(DMA5_X_COUNT, val) +#define bfin_read_DMA5_Y_COUNT() bfin_read16(DMA5_Y_COUNT) +#define bfin_write_DMA5_Y_COUNT(val) bfin_write16(DMA5_Y_COUNT, val) +#define bfin_read_DMA5_X_MODIFY() bfin_read16(DMA5_X_MODIFY) +#define bfin_write_DMA5_X_MODIFY(val) bfin_write16(DMA5_X_MODIFY, val) +#define bfin_read_DMA5_Y_MODIFY() bfin_read16(DMA5_Y_MODIFY) +#define bfin_write_DMA5_Y_MODIFY(val) bfin_write16(DMA5_Y_MODIFY, val) +#define bfin_read_DMA5_CURR_DESC_PTR() bfin_read32(DMA5_CURR_DESC_PTR) +#define bfin_write_DMA5_CURR_DESC_PTR(val) bfin_write32(DMA5_CURR_DESC_PTR, val) +#define bfin_read_DMA5_CURR_ADDR() bfin_read32(DMA5_CURR_ADDR) +#define bfin_write_DMA5_CURR_ADDR(val) bfin_write32(DMA5_CURR_ADDR, val) +#define bfin_read_DMA5_CURR_X_COUNT() bfin_read16(DMA5_CURR_X_COUNT) +#define bfin_write_DMA5_CURR_X_COUNT(val) bfin_write16(DMA5_CURR_X_COUNT, val) +#define bfin_read_DMA5_CURR_Y_COUNT() bfin_read16(DMA5_CURR_Y_COUNT) +#define bfin_write_DMA5_CURR_Y_COUNT(val) bfin_write16(DMA5_CURR_Y_COUNT, val) +#define bfin_read_DMA5_IRQ_STATUS() bfin_read16(DMA5_IRQ_STATUS) +#define bfin_write_DMA5_IRQ_STATUS(val) bfin_write16(DMA5_IRQ_STATUS, val) +#define bfin_read_DMA5_PERIPHERAL_MAP() bfin_read16(DMA5_PERIPHERAL_MAP) +#define bfin_write_DMA5_PERIPHERAL_MAP(val) bfin_write16(DMA5_PERIPHERAL_MAP, val) + +#define bfin_read_DMA6_CONFIG() bfin_read16(DMA6_CONFIG) +#define bfin_write_DMA6_CONFIG(val) bfin_write16(DMA6_CONFIG, val) +#define bfin_read_DMA6_NEXT_DESC_PTR() bfin_read32(DMA6_NEXT_DESC_PTR) +#define bfin_write_DMA6_NEXT_DESC_PTR(val) bfin_write32(DMA6_NEXT_DESC_PTR, val) +#define bfin_read_DMA6_START_ADDR() bfin_read32(DMA6_START_ADDR) +#define bfin_write_DMA6_START_ADDR(val) bfin_write32(DMA6_START_ADDR, val) +#define bfin_read_DMA6_X_COUNT() bfin_read16(DMA6_X_COUNT) +#define bfin_write_DMA6_X_COUNT(val) bfin_write16(DMA6_X_COUNT, val) +#define bfin_read_DMA6_Y_COUNT() bfin_read16(DMA6_Y_COUNT) +#define bfin_write_DMA6_Y_COUNT(val) bfin_write16(DMA6_Y_COUNT, val) +#define bfin_read_DMA6_X_MODIFY() bfin_read16(DMA6_X_MODIFY) +#define bfin_write_DMA6_X_MODIFY(val) bfin_write16(DMA6_X_MODIFY, val) +#define bfin_read_DMA6_Y_MODIFY() bfin_read16(DMA6_Y_MODIFY) +#define bfin_write_DMA6_Y_MODIFY(val) bfin_write16(DMA6_Y_MODIFY, val) +#define bfin_read_DMA6_CURR_DESC_PTR() bfin_read32(DMA6_CURR_DESC_PTR) +#define bfin_write_DMA6_CURR_DESC_PTR(val) bfin_write32(DMA6_CURR_DESC_PTR, val) +#define bfin_read_DMA6_CURR_ADDR() bfin_read32(DMA6_CURR_ADDR) +#define bfin_write_DMA6_CURR_ADDR(val) bfin_write32(DMA6_CURR_ADDR, val) +#define bfin_read_DMA6_CURR_X_COUNT() bfin_read16(DMA6_CURR_X_COUNT) +#define bfin_write_DMA6_CURR_X_COUNT(val) bfin_write16(DMA6_CURR_X_COUNT, val) +#define bfin_read_DMA6_CURR_Y_COUNT() bfin_read16(DMA6_CURR_Y_COUNT) +#define bfin_write_DMA6_CURR_Y_COUNT(val) bfin_write16(DMA6_CURR_Y_COUNT, val) +#define bfin_read_DMA6_IRQ_STATUS() bfin_read16(DMA6_IRQ_STATUS) +#define bfin_write_DMA6_IRQ_STATUS(val) bfin_write16(DMA6_IRQ_STATUS, val) +#define bfin_read_DMA6_PERIPHERAL_MAP() bfin_read16(DMA6_PERIPHERAL_MAP) +#define bfin_write_DMA6_PERIPHERAL_MAP(val) bfin_write16(DMA6_PERIPHERAL_MAP, val) + +#define bfin_read_DMA7_CONFIG() bfin_read16(DMA7_CONFIG) +#define bfin_write_DMA7_CONFIG(val) bfin_write16(DMA7_CONFIG, val) +#define bfin_read_DMA7_NEXT_DESC_PTR() bfin_read32(DMA7_NEXT_DESC_PTR) +#define bfin_write_DMA7_NEXT_DESC_PTR(val) bfin_write32(DMA7_NEXT_DESC_PTR, val) +#define bfin_read_DMA7_START_ADDR() bfin_read32(DMA7_START_ADDR) +#define bfin_write_DMA7_START_ADDR(val) bfin_write32(DMA7_START_ADDR, val) +#define bfin_read_DMA7_X_COUNT() bfin_read16(DMA7_X_COUNT) +#define bfin_write_DMA7_X_COUNT(val) bfin_write16(DMA7_X_COUNT, val) +#define bfin_read_DMA7_Y_COUNT() bfin_read16(DMA7_Y_COUNT) +#define bfin_write_DMA7_Y_COUNT(val) bfin_write16(DMA7_Y_COUNT, val) +#define bfin_read_DMA7_X_MODIFY() bfin_read16(DMA7_X_MODIFY) +#define bfin_write_DMA7_X_MODIFY(val) bfin_write16(DMA7_X_MODIFY, val) +#define bfin_read_DMA7_Y_MODIFY() bfin_read16(DMA7_Y_MODIFY) +#define bfin_write_DMA7_Y_MODIFY(val) bfin_write16(DMA7_Y_MODIFY, val) +#define bfin_read_DMA7_CURR_DESC_PTR() bfin_read32(DMA7_CURR_DESC_PTR) +#define bfin_write_DMA7_CURR_DESC_PTR(val) bfin_write32(DMA7_CURR_DESC_PTR, val) +#define bfin_read_DMA7_CURR_ADDR() bfin_read32(DMA7_CURR_ADDR) +#define bfin_write_DMA7_CURR_ADDR(val) bfin_write32(DMA7_CURR_ADDR, val) +#define bfin_read_DMA7_CURR_X_COUNT() bfin_read16(DMA7_CURR_X_COUNT) +#define bfin_write_DMA7_CURR_X_COUNT(val) bfin_write16(DMA7_CURR_X_COUNT, val) +#define bfin_read_DMA7_CURR_Y_COUNT() bfin_read16(DMA7_CURR_Y_COUNT) +#define bfin_write_DMA7_CURR_Y_COUNT(val) bfin_write16(DMA7_CURR_Y_COUNT, val) +#define bfin_read_DMA7_IRQ_STATUS() bfin_read16(DMA7_IRQ_STATUS) +#define bfin_write_DMA7_IRQ_STATUS(val) bfin_write16(DMA7_IRQ_STATUS, val) +#define bfin_read_DMA7_PERIPHERAL_MAP() bfin_read16(DMA7_PERIPHERAL_MAP) +#define bfin_write_DMA7_PERIPHERAL_MAP(val) bfin_write16(DMA7_PERIPHERAL_MAP, val) + +#define bfin_read_DMA8_CONFIG() bfin_read16(DMA8_CONFIG) +#define bfin_write_DMA8_CONFIG(val) bfin_write16(DMA8_CONFIG, val) +#define bfin_read_DMA8_NEXT_DESC_PTR() bfin_read32(DMA8_NEXT_DESC_PTR) +#define bfin_write_DMA8_NEXT_DESC_PTR(val) bfin_write32(DMA8_NEXT_DESC_PTR, val) +#define bfin_read_DMA8_START_ADDR() bfin_read32(DMA8_START_ADDR) +#define bfin_write_DMA8_START_ADDR(val) bfin_write32(DMA8_START_ADDR, val) +#define bfin_read_DMA8_X_COUNT() bfin_read16(DMA8_X_COUNT) +#define bfin_write_DMA8_X_COUNT(val) bfin_write16(DMA8_X_COUNT, val) +#define bfin_read_DMA8_Y_COUNT() bfin_read16(DMA8_Y_COUNT) +#define bfin_write_DMA8_Y_COUNT(val) bfin_write16(DMA8_Y_COUNT, val) +#define bfin_read_DMA8_X_MODIFY() bfin_read16(DMA8_X_MODIFY) +#define bfin_write_DMA8_X_MODIFY(val) bfin_write16(DMA8_X_MODIFY, val) +#define bfin_read_DMA8_Y_MODIFY() bfin_read16(DMA8_Y_MODIFY) +#define bfin_write_DMA8_Y_MODIFY(val) bfin_write16(DMA8_Y_MODIFY, val) +#define bfin_read_DMA8_CURR_DESC_PTR() bfin_read32(DMA8_CURR_DESC_PTR) +#define bfin_write_DMA8_CURR_DESC_PTR(val) bfin_write32(DMA8_CURR_DESC_PTR, val) +#define bfin_read_DMA8_CURR_ADDR() bfin_read32(DMA8_CURR_ADDR) +#define bfin_write_DMA8_CURR_ADDR(val) bfin_write32(DMA8_CURR_ADDR, val) +#define bfin_read_DMA8_CURR_X_COUNT() bfin_read16(DMA8_CURR_X_COUNT) +#define bfin_write_DMA8_CURR_X_COUNT(val) bfin_write16(DMA8_CURR_X_COUNT, val) +#define bfin_read_DMA8_CURR_Y_COUNT() bfin_read16(DMA8_CURR_Y_COUNT) +#define bfin_write_DMA8_CURR_Y_COUNT(val) bfin_write16(DMA8_CURR_Y_COUNT, val) +#define bfin_read_DMA8_IRQ_STATUS() bfin_read16(DMA8_IRQ_STATUS) +#define bfin_write_DMA8_IRQ_STATUS(val) bfin_write16(DMA8_IRQ_STATUS, val) +#define bfin_read_DMA8_PERIPHERAL_MAP() bfin_read16(DMA8_PERIPHERAL_MAP) +#define bfin_write_DMA8_PERIPHERAL_MAP(val) bfin_write16(DMA8_PERIPHERAL_MAP, val) + +#define bfin_read_DMA9_CONFIG() bfin_read16(DMA9_CONFIG) +#define bfin_write_DMA9_CONFIG(val) bfin_write16(DMA9_CONFIG, val) +#define bfin_read_DMA9_NEXT_DESC_PTR() bfin_read32(DMA9_NEXT_DESC_PTR) +#define bfin_write_DMA9_NEXT_DESC_PTR(val) bfin_write32(DMA9_NEXT_DESC_PTR, val) +#define bfin_read_DMA9_START_ADDR() bfin_read32(DMA9_START_ADDR) +#define bfin_write_DMA9_START_ADDR(val) bfin_write32(DMA9_START_ADDR, val) +#define bfin_read_DMA9_X_COUNT() bfin_read16(DMA9_X_COUNT) +#define bfin_write_DMA9_X_COUNT(val) bfin_write16(DMA9_X_COUNT, val) +#define bfin_read_DMA9_Y_COUNT() bfin_read16(DMA9_Y_COUNT) +#define bfin_write_DMA9_Y_COUNT(val) bfin_write16(DMA9_Y_COUNT, val) +#define bfin_read_DMA9_X_MODIFY() bfin_read16(DMA9_X_MODIFY) +#define bfin_write_DMA9_X_MODIFY(val) bfin_write16(DMA9_X_MODIFY, val) +#define bfin_read_DMA9_Y_MODIFY() bfin_read16(DMA9_Y_MODIFY) +#define bfin_write_DMA9_Y_MODIFY(val) bfin_write16(DMA9_Y_MODIFY, val) +#define bfin_read_DMA9_CURR_DESC_PTR() bfin_read32(DMA9_CURR_DESC_PTR) +#define bfin_write_DMA9_CURR_DESC_PTR(val) bfin_write32(DMA9_CURR_DESC_PTR, val) +#define bfin_read_DMA9_CURR_ADDR() bfin_read32(DMA9_CURR_ADDR) +#define bfin_write_DMA9_CURR_ADDR(val) bfin_write32(DMA9_CURR_ADDR, val) +#define bfin_read_DMA9_CURR_X_COUNT() bfin_read16(DMA9_CURR_X_COUNT) +#define bfin_write_DMA9_CURR_X_COUNT(val) bfin_write16(DMA9_CURR_X_COUNT, val) +#define bfin_read_DMA9_CURR_Y_COUNT() bfin_read16(DMA9_CURR_Y_COUNT) +#define bfin_write_DMA9_CURR_Y_COUNT(val) bfin_write16(DMA9_CURR_Y_COUNT, val) +#define bfin_read_DMA9_IRQ_STATUS() bfin_read16(DMA9_IRQ_STATUS) +#define bfin_write_DMA9_IRQ_STATUS(val) bfin_write16(DMA9_IRQ_STATUS, val) +#define bfin_read_DMA9_PERIPHERAL_MAP() bfin_read16(DMA9_PERIPHERAL_MAP) +#define bfin_write_DMA9_PERIPHERAL_MAP(val) bfin_write16(DMA9_PERIPHERAL_MAP, val) + +#define bfin_read_DMA10_CONFIG() bfin_read16(DMA10_CONFIG) +#define bfin_write_DMA10_CONFIG(val) bfin_write16(DMA10_CONFIG, val) +#define bfin_read_DMA10_NEXT_DESC_PTR() bfin_read32(DMA10_NEXT_DESC_PTR) +#define bfin_write_DMA10_NEXT_DESC_PTR(val) bfin_write32(DMA10_NEXT_DESC_PTR, val) +#define bfin_read_DMA10_START_ADDR() bfin_read32(DMA10_START_ADDR) +#define bfin_write_DMA10_START_ADDR(val) bfin_write32(DMA10_START_ADDR, val) +#define bfin_read_DMA10_X_COUNT() bfin_read16(DMA10_X_COUNT) +#define bfin_write_DMA10_X_COUNT(val) bfin_write16(DMA10_X_COUNT, val) +#define bfin_read_DMA10_Y_COUNT() bfin_read16(DMA10_Y_COUNT) +#define bfin_write_DMA10_Y_COUNT(val) bfin_write16(DMA10_Y_COUNT, val) +#define bfin_read_DMA10_X_MODIFY() bfin_read16(DMA10_X_MODIFY) +#define bfin_write_DMA10_X_MODIFY(val) bfin_write16(DMA10_X_MODIFY, val) +#define bfin_read_DMA10_Y_MODIFY() bfin_read16(DMA10_Y_MODIFY) +#define bfin_write_DMA10_Y_MODIFY(val) bfin_write16(DMA10_Y_MODIFY, val) +#define bfin_read_DMA10_CURR_DESC_PTR() bfin_read32(DMA10_CURR_DESC_PTR) +#define bfin_write_DMA10_CURR_DESC_PTR(val) bfin_write32(DMA10_CURR_DESC_PTR, val) +#define bfin_read_DMA10_CURR_ADDR() bfin_read32(DMA10_CURR_ADDR) +#define bfin_write_DMA10_CURR_ADDR(val) bfin_write32(DMA10_CURR_ADDR, val) +#define bfin_read_DMA10_CURR_X_COUNT() bfin_read16(DMA10_CURR_X_COUNT) +#define bfin_write_DMA10_CURR_X_COUNT(val) bfin_write16(DMA10_CURR_X_COUNT, val) +#define bfin_read_DMA10_CURR_Y_COUNT() bfin_read16(DMA10_CURR_Y_COUNT) +#define bfin_write_DMA10_CURR_Y_COUNT(val) bfin_write16(DMA10_CURR_Y_COUNT, val) +#define bfin_read_DMA10_IRQ_STATUS() bfin_read16(DMA10_IRQ_STATUS) +#define bfin_write_DMA10_IRQ_STATUS(val) bfin_write16(DMA10_IRQ_STATUS, val) +#define bfin_read_DMA10_PERIPHERAL_MAP() bfin_read16(DMA10_PERIPHERAL_MAP) +#define bfin_write_DMA10_PERIPHERAL_MAP(val) bfin_write16(DMA10_PERIPHERAL_MAP, val) + +#define bfin_read_DMA11_CONFIG() bfin_read16(DMA11_CONFIG) +#define bfin_write_DMA11_CONFIG(val) bfin_write16(DMA11_CONFIG, val) +#define bfin_read_DMA11_NEXT_DESC_PTR() bfin_read32(DMA11_NEXT_DESC_PTR) +#define bfin_write_DMA11_NEXT_DESC_PTR(val) bfin_write32(DMA11_NEXT_DESC_PTR, val) +#define bfin_read_DMA11_START_ADDR() bfin_read32(DMA11_START_ADDR) +#define bfin_write_DMA11_START_ADDR(val) bfin_write32(DMA11_START_ADDR, val) +#define bfin_read_DMA11_X_COUNT() bfin_read16(DMA11_X_COUNT) +#define bfin_write_DMA11_X_COUNT(val) bfin_write16(DMA11_X_COUNT, val) +#define bfin_read_DMA11_Y_COUNT() bfin_read16(DMA11_Y_COUNT) +#define bfin_write_DMA11_Y_COUNT(val) bfin_write16(DMA11_Y_COUNT, val) +#define bfin_read_DMA11_X_MODIFY() bfin_read16(DMA11_X_MODIFY) +#define bfin_write_DMA11_X_MODIFY(val) bfin_write16(DMA11_X_MODIFY, val) +#define bfin_read_DMA11_Y_MODIFY() bfin_read16(DMA11_Y_MODIFY) +#define bfin_write_DMA11_Y_MODIFY(val) bfin_write16(DMA11_Y_MODIFY, val) +#define bfin_read_DMA11_CURR_DESC_PTR() bfin_read32(DMA11_CURR_DESC_PTR) +#define bfin_write_DMA11_CURR_DESC_PTR(val) bfin_write32(DMA11_CURR_DESC_PTR, val) +#define bfin_read_DMA11_CURR_ADDR() bfin_read32(DMA11_CURR_ADDR) +#define bfin_write_DMA11_CURR_ADDR(val) bfin_write32(DMA11_CURR_ADDR, val) +#define bfin_read_DMA11_CURR_X_COUNT() bfin_read16(DMA11_CURR_X_COUNT) +#define bfin_write_DMA11_CURR_X_COUNT(val) bfin_write16(DMA11_CURR_X_COUNT, val) +#define bfin_read_DMA11_CURR_Y_COUNT() bfin_read16(DMA11_CURR_Y_COUNT) +#define bfin_write_DMA11_CURR_Y_COUNT(val) bfin_write16(DMA11_CURR_Y_COUNT, val) +#define bfin_read_DMA11_IRQ_STATUS() bfin_read16(DMA11_IRQ_STATUS) +#define bfin_write_DMA11_IRQ_STATUS(val) bfin_write16(DMA11_IRQ_STATUS, val) +#define bfin_read_DMA11_PERIPHERAL_MAP() bfin_read16(DMA11_PERIPHERAL_MAP) +#define bfin_write_DMA11_PERIPHERAL_MAP(val) bfin_write16(DMA11_PERIPHERAL_MAP, val) + +#define bfin_read_MDMA_D0_CONFIG() bfin_read16(MDMA_D0_CONFIG) +#define bfin_write_MDMA_D0_CONFIG(val) bfin_write16(MDMA_D0_CONFIG, val) +#define bfin_read_MDMA_D0_NEXT_DESC_PTR() bfin_read32(MDMA_D0_NEXT_DESC_PTR) +#define bfin_write_MDMA_D0_NEXT_DESC_PTR(val) bfin_write32(MDMA_D0_NEXT_DESC_PTR, val) +#define bfin_read_MDMA_D0_START_ADDR() bfin_read32(MDMA_D0_START_ADDR) +#define bfin_write_MDMA_D0_START_ADDR(val) bfin_write32(MDMA_D0_START_ADDR, val) +#define bfin_read_MDMA_D0_X_COUNT() bfin_read16(MDMA_D0_X_COUNT) +#define bfin_write_MDMA_D0_X_COUNT(val) bfin_write16(MDMA_D0_X_COUNT, val) +#define bfin_read_MDMA_D0_Y_COUNT() bfin_read16(MDMA_D0_Y_COUNT) +#define bfin_write_MDMA_D0_Y_COUNT(val) bfin_write16(MDMA_D0_Y_COUNT, val) +#define bfin_read_MDMA_D0_X_MODIFY() bfin_read16(MDMA_D0_X_MODIFY) +#define bfin_write_MDMA_D0_X_MODIFY(val) bfin_write16(MDMA_D0_X_MODIFY, val) +#define bfin_read_MDMA_D0_Y_MODIFY() bfin_read16(MDMA_D0_Y_MODIFY) +#define bfin_write_MDMA_D0_Y_MODIFY(val) bfin_write16(MDMA_D0_Y_MODIFY, val) +#define bfin_read_MDMA_D0_CURR_DESC_PTR() bfin_read32(MDMA_D0_CURR_DESC_PTR) +#define bfin_write_MDMA_D0_CURR_DESC_PTR(val) bfin_write32(MDMA_D0_CURR_DESC_PTR, val) +#define bfin_read_MDMA_D0_CURR_ADDR() bfin_read32(MDMA_D0_CURR_ADDR) +#define bfin_write_MDMA_D0_CURR_ADDR(val) bfin_write32(MDMA_D0_CURR_ADDR, val) +#define bfin_read_MDMA_D0_CURR_X_COUNT() bfin_read16(MDMA_D0_CURR_X_COUNT) +#define bfin_write_MDMA_D0_CURR_X_COUNT(val) bfin_write16(MDMA_D0_CURR_X_COUNT, val) +#define bfin_read_MDMA_D0_CURR_Y_COUNT() bfin_read16(MDMA_D0_CURR_Y_COUNT) +#define bfin_write_MDMA_D0_CURR_Y_COUNT(val) bfin_write16(MDMA_D0_CURR_Y_COUNT, val) +#define bfin_read_MDMA_D0_IRQ_STATUS() bfin_read16(MDMA_D0_IRQ_STATUS) +#define bfin_write_MDMA_D0_IRQ_STATUS(val) bfin_write16(MDMA_D0_IRQ_STATUS, val) +#define bfin_read_MDMA_D0_PERIPHERAL_MAP() bfin_read16(MDMA_D0_PERIPHERAL_MAP) +#define bfin_write_MDMA_D0_PERIPHERAL_MAP(val) bfin_write16(MDMA_D0_PERIPHERAL_MAP, val) + +#define bfin_read_MDMA_S0_CONFIG() bfin_read16(MDMA_S0_CONFIG) +#define bfin_write_MDMA_S0_CONFIG(val) bfin_write16(MDMA_S0_CONFIG, val) +#define bfin_read_MDMA_S0_NEXT_DESC_PTR() bfin_read32(MDMA_S0_NEXT_DESC_PTR) +#define bfin_write_MDMA_S0_NEXT_DESC_PTR(val) bfin_write32(MDMA_S0_NEXT_DESC_PTR, val) +#define bfin_read_MDMA_S0_START_ADDR() bfin_read32(MDMA_S0_START_ADDR) +#define bfin_write_MDMA_S0_START_ADDR(val) bfin_write32(MDMA_S0_START_ADDR, val) +#define bfin_read_MDMA_S0_X_COUNT() bfin_read16(MDMA_S0_X_COUNT) +#define bfin_write_MDMA_S0_X_COUNT(val) bfin_write16(MDMA_S0_X_COUNT, val) +#define bfin_read_MDMA_S0_Y_COUNT() bfin_read16(MDMA_S0_Y_COUNT) +#define bfin_write_MDMA_S0_Y_COUNT(val) bfin_write16(MDMA_S0_Y_COUNT, val) +#define bfin_read_MDMA_S0_X_MODIFY() bfin_read16(MDMA_S0_X_MODIFY) +#define bfin_write_MDMA_S0_X_MODIFY(val) bfin_write16(MDMA_S0_X_MODIFY, val) +#define bfin_read_MDMA_S0_Y_MODIFY() bfin_read16(MDMA_S0_Y_MODIFY) +#define bfin_write_MDMA_S0_Y_MODIFY(val) bfin_write16(MDMA_S0_Y_MODIFY, val) +#define bfin_read_MDMA_S0_CURR_DESC_PTR() bfin_read32(MDMA_S0_CURR_DESC_PTR) +#define bfin_write_MDMA_S0_CURR_DESC_PTR(val) bfin_write32(MDMA_S0_CURR_DESC_PTR, val) +#define bfin_read_MDMA_S0_CURR_ADDR() bfin_read32(MDMA_S0_CURR_ADDR) +#define bfin_write_MDMA_S0_CURR_ADDR(val) bfin_write32(MDMA_S0_CURR_ADDR, val) +#define bfin_read_MDMA_S0_CURR_X_COUNT() bfin_read16(MDMA_S0_CURR_X_COUNT) +#define bfin_write_MDMA_S0_CURR_X_COUNT(val) bfin_write16(MDMA_S0_CURR_X_COUNT, val) +#define bfin_read_MDMA_S0_CURR_Y_COUNT() bfin_read16(MDMA_S0_CURR_Y_COUNT) +#define bfin_write_MDMA_S0_CURR_Y_COUNT(val) bfin_write16(MDMA_S0_CURR_Y_COUNT, val) +#define bfin_read_MDMA_S0_IRQ_STATUS() bfin_read16(MDMA_S0_IRQ_STATUS) +#define bfin_write_MDMA_S0_IRQ_STATUS(val) bfin_write16(MDMA_S0_IRQ_STATUS, val) +#define bfin_read_MDMA_S0_PERIPHERAL_MAP() bfin_read16(MDMA_S0_PERIPHERAL_MAP) +#define bfin_write_MDMA_S0_PERIPHERAL_MAP(val) bfin_write16(MDMA_S0_PERIPHERAL_MAP, val) + +#define bfin_read_MDMA_D1_CONFIG() bfin_read16(MDMA_D1_CONFIG) +#define bfin_write_MDMA_D1_CONFIG(val) bfin_write16(MDMA_D1_CONFIG, val) +#define bfin_read_MDMA_D1_NEXT_DESC_PTR() bfin_read32(MDMA_D1_NEXT_DESC_PTR) +#define bfin_write_MDMA_D1_NEXT_DESC_PTR(val) bfin_write32(MDMA_D1_NEXT_DESC_PTR, val) +#define bfin_read_MDMA_D1_START_ADDR() bfin_read32(MDMA_D1_START_ADDR) +#define bfin_write_MDMA_D1_START_ADDR(val) bfin_write32(MDMA_D1_START_ADDR, val) +#define bfin_read_MDMA_D1_X_COUNT() bfin_read16(MDMA_D1_X_COUNT) +#define bfin_write_MDMA_D1_X_COUNT(val) bfin_write16(MDMA_D1_X_COUNT, val) +#define bfin_read_MDMA_D1_Y_COUNT() bfin_read16(MDMA_D1_Y_COUNT) +#define bfin_write_MDMA_D1_Y_COUNT(val) bfin_write16(MDMA_D1_Y_COUNT, val) +#define bfin_read_MDMA_D1_X_MODIFY() bfin_read16(MDMA_D1_X_MODIFY) +#define bfin_write_MDMA_D1_X_MODIFY(val) bfin_write16(MDMA_D1_X_MODIFY, val) +#define bfin_read_MDMA_D1_Y_MODIFY() bfin_read16(MDMA_D1_Y_MODIFY) +#define bfin_write_MDMA_D1_Y_MODIFY(val) bfin_write16(MDMA_D1_Y_MODIFY, val) +#define bfin_read_MDMA_D1_CURR_DESC_PTR() bfin_read32(MDMA_D1_CURR_DESC_PTR) +#define bfin_write_MDMA_D1_CURR_DESC_PTR(val) bfin_write32(MDMA_D1_CURR_DESC_PTR, val) +#define bfin_read_MDMA_D1_CURR_ADDR() bfin_read32(MDMA_D1_CURR_ADDR) +#define bfin_write_MDMA_D1_CURR_ADDR(val) bfin_write32(MDMA_D1_CURR_ADDR, val) +#define bfin_read_MDMA_D1_CURR_X_COUNT() bfin_read16(MDMA_D1_CURR_X_COUNT) +#define bfin_write_MDMA_D1_CURR_X_COUNT(val) bfin_write16(MDMA_D1_CURR_X_COUNT, val) +#define bfin_read_MDMA_D1_CURR_Y_COUNT() bfin_read16(MDMA_D1_CURR_Y_COUNT) +#define bfin_write_MDMA_D1_CURR_Y_COUNT(val) bfin_write16(MDMA_D1_CURR_Y_COUNT, val) +#define bfin_read_MDMA_D1_IRQ_STATUS() bfin_read16(MDMA_D1_IRQ_STATUS) +#define bfin_write_MDMA_D1_IRQ_STATUS(val) bfin_write16(MDMA_D1_IRQ_STATUS, val) +#define bfin_read_MDMA_D1_PERIPHERAL_MAP() bfin_read16(MDMA_D1_PERIPHERAL_MAP) +#define bfin_write_MDMA_D1_PERIPHERAL_MAP(val) bfin_write16(MDMA_D1_PERIPHERAL_MAP, val) + +#define bfin_read_MDMA_S1_CONFIG() bfin_read16(MDMA_S1_CONFIG) +#define bfin_write_MDMA_S1_CONFIG(val) bfin_write16(MDMA_S1_CONFIG, val) +#define bfin_read_MDMA_S1_NEXT_DESC_PTR() bfin_read32(MDMA_S1_NEXT_DESC_PTR) +#define bfin_write_MDMA_S1_NEXT_DESC_PTR(val) bfin_write32(MDMA_S1_NEXT_DESC_PTR, val) +#define bfin_read_MDMA_S1_START_ADDR() bfin_read32(MDMA_S1_START_ADDR) +#define bfin_write_MDMA_S1_START_ADDR(val) bfin_write32(MDMA_S1_START_ADDR, val) +#define bfin_read_MDMA_S1_X_COUNT() bfin_read16(MDMA_S1_X_COUNT) +#define bfin_write_MDMA_S1_X_COUNT(val) bfin_write16(MDMA_S1_X_COUNT, val) +#define bfin_read_MDMA_S1_Y_COUNT() bfin_read16(MDMA_S1_Y_COUNT) +#define bfin_write_MDMA_S1_Y_COUNT(val) bfin_write16(MDMA_S1_Y_COUNT, val) +#define bfin_read_MDMA_S1_X_MODIFY() bfin_read16(MDMA_S1_X_MODIFY) +#define bfin_write_MDMA_S1_X_MODIFY(val) bfin_write16(MDMA_S1_X_MODIFY, val) +#define bfin_read_MDMA_S1_Y_MODIFY() bfin_read16(MDMA_S1_Y_MODIFY) +#define bfin_write_MDMA_S1_Y_MODIFY(val) bfin_write16(MDMA_S1_Y_MODIFY, val) +#define bfin_read_MDMA_S1_CURR_DESC_PTR() bfin_read32(MDMA_S1_CURR_DESC_PTR) +#define bfin_write_MDMA_S1_CURR_DESC_PTR(val) bfin_write32(MDMA_S1_CURR_DESC_PTR, val) +#define bfin_read_MDMA_S1_CURR_ADDR() bfin_read32(MDMA_S1_CURR_ADDR) +#define bfin_write_MDMA_S1_CURR_ADDR(val) bfin_write32(MDMA_S1_CURR_ADDR, val) +#define bfin_read_MDMA_S1_CURR_X_COUNT() bfin_read16(MDMA_S1_CURR_X_COUNT) +#define bfin_write_MDMA_S1_CURR_X_COUNT(val) bfin_write16(MDMA_S1_CURR_X_COUNT, val) +#define bfin_read_MDMA_S1_CURR_Y_COUNT() bfin_read16(MDMA_S1_CURR_Y_COUNT) +#define bfin_write_MDMA_S1_CURR_Y_COUNT(val) bfin_write16(MDMA_S1_CURR_Y_COUNT, val) +#define bfin_read_MDMA_S1_IRQ_STATUS() bfin_read16(MDMA_S1_IRQ_STATUS) +#define bfin_write_MDMA_S1_IRQ_STATUS(val) bfin_write16(MDMA_S1_IRQ_STATUS, val) +#define bfin_read_MDMA_S1_PERIPHERAL_MAP() bfin_read16(MDMA_S1_PERIPHERAL_MAP) +#define bfin_write_MDMA_S1_PERIPHERAL_MAP(val) bfin_write16(MDMA_S1_PERIPHERAL_MAP, val) + + +/* Parallel Peripheral Interface (0xFFC01000 - 0xFFC010FF) */ +#define bfin_read_PPI_CONTROL() bfin_read16(PPI_CONTROL) +#define bfin_write_PPI_CONTROL(val) bfin_write16(PPI_CONTROL, val) +#define bfin_read_PPI_STATUS() bfin_read16(PPI_STATUS) +#define bfin_write_PPI_STATUS(val) bfin_write16(PPI_STATUS, val) +#define bfin_read_PPI_DELAY() bfin_read16(PPI_DELAY) +#define bfin_write_PPI_DELAY(val) bfin_write16(PPI_DELAY, val) +#define bfin_read_PPI_COUNT() bfin_read16(PPI_COUNT) +#define bfin_write_PPI_COUNT(val) bfin_write16(PPI_COUNT, val) +#define bfin_read_PPI_FRAME() bfin_read16(PPI_FRAME) +#define bfin_write_PPI_FRAME(val) bfin_write16(PPI_FRAME, val) + + +/* Two-Wire Interface (0xFFC01400 - 0xFFC014FF) */ +#define bfin_read_TWI_CLKDIV() bfin_read16(TWI_CLKDIV) +#define bfin_write_TWI_CLKDIV(val) bfin_write16(TWI_CLKDIV, val) +#define bfin_read_TWI_CONTROL() bfin_read16(TWI_CONTROL) +#define bfin_write_TWI_CONTROL(val) bfin_write16(TWI_CONTROL, val) +#define bfin_read_TWI_SLAVE_CTL() bfin_read16(TWI_SLAVE_CTL) +#define bfin_write_TWI_SLAVE_CTL(val) bfin_write16(TWI_SLAVE_CTL, val) +#define bfin_read_TWI_SLAVE_STAT() bfin_read16(TWI_SLAVE_STAT) +#define bfin_write_TWI_SLAVE_STAT(val) bfin_write16(TWI_SLAVE_STAT, val) +#define bfin_read_TWI_SLAVE_ADDR() bfin_read16(TWI_SLAVE_ADDR) +#define bfin_write_TWI_SLAVE_ADDR(val) bfin_write16(TWI_SLAVE_ADDR, val) +#define bfin_read_TWI_MASTER_CTL() bfin_read16(TWI_MASTER_CTL) +#define bfin_write_TWI_MASTER_CTL(val) bfin_write16(TWI_MASTER_CTL, val) +#define bfin_read_TWI_MASTER_STAT() bfin_read16(TWI_MASTER_STAT) +#define bfin_write_TWI_MASTER_STAT(val) bfin_write16(TWI_MASTER_STAT, val) +#define bfin_read_TWI_MASTER_ADDR() bfin_read16(TWI_MASTER_ADDR) +#define bfin_write_TWI_MASTER_ADDR(val) bfin_write16(TWI_MASTER_ADDR, val) +#define bfin_read_TWI_INT_STAT() bfin_read16(TWI_INT_STAT) +#define bfin_write_TWI_INT_STAT(val) bfin_write16(TWI_INT_STAT, val) +#define bfin_read_TWI_INT_MASK() bfin_read16(TWI_INT_MASK) +#define bfin_write_TWI_INT_MASK(val) bfin_write16(TWI_INT_MASK, val) +#define bfin_read_TWI_FIFO_CTL() bfin_read16(TWI_FIFO_CTL) +#define bfin_write_TWI_FIFO_CTL(val) bfin_write16(TWI_FIFO_CTL, val) +#define bfin_read_TWI_FIFO_STAT() bfin_read16(TWI_FIFO_STAT) +#define bfin_write_TWI_FIFO_STAT(val) bfin_write16(TWI_FIFO_STAT, val) +#define bfin_read_TWI_XMT_DATA8() bfin_read16(TWI_XMT_DATA8) +#define bfin_write_TWI_XMT_DATA8(val) bfin_write16(TWI_XMT_DATA8, val) +#define bfin_read_TWI_XMT_DATA16() bfin_read16(TWI_XMT_DATA16) +#define bfin_write_TWI_XMT_DATA16(val) bfin_write16(TWI_XMT_DATA16, val) +#define bfin_read_TWI_RCV_DATA8() bfin_read16(TWI_RCV_DATA8) +#define bfin_write_TWI_RCV_DATA8(val) bfin_write16(TWI_RCV_DATA8, val) +#define bfin_read_TWI_RCV_DATA16() bfin_read16(TWI_RCV_DATA16) +#define bfin_write_TWI_RCV_DATA16(val) bfin_write16(TWI_RCV_DATA16, val) + + +/* General Purpose I/O Port G (0xFFC01500 - 0xFFC015FF) */ +#define bfin_read_PORTGIO() bfin_read16(PORTGIO) +#define bfin_write_PORTGIO(val) bfin_write16(PORTGIO, val) +#define bfin_read_PORTGIO_CLEAR() bfin_read16(PORTGIO_CLEAR) +#define bfin_write_PORTGIO_CLEAR(val) bfin_write16(PORTGIO_CLEAR, val) +#define bfin_read_PORTGIO_SET() bfin_read16(PORTGIO_SET) +#define bfin_write_PORTGIO_SET(val) bfin_write16(PORTGIO_SET, val) +#define bfin_read_PORTGIO_TOGGLE() bfin_read16(PORTGIO_TOGGLE) +#define bfin_write_PORTGIO_TOGGLE(val) bfin_write16(PORTGIO_TOGGLE, val) +#define bfin_read_PORTGIO_MASKA() bfin_read16(PORTGIO_MASKA) +#define bfin_write_PORTGIO_MASKA(val) bfin_write16(PORTGIO_MASKA, val) +#define bfin_read_PORTGIO_MASKA_CLEAR() bfin_read16(PORTGIO_MASKA_CLEAR) +#define bfin_write_PORTGIO_MASKA_CLEAR(val) bfin_write16(PORTGIO_MASKA_CLEAR, val) +#define bfin_read_PORTGIO_MASKA_SET() bfin_read16(PORTGIO_MASKA_SET) +#define bfin_write_PORTGIO_MASKA_SET(val) bfin_write16(PORTGIO_MASKA_SET, val) +#define bfin_read_PORTGIO_MASKA_TOGGLE() bfin_read16(PORTGIO_MASKA_TOGGLE) +#define bfin_write_PORTGIO_MASKA_TOGGLE(val) bfin_write16(PORTGIO_MASKA_TOGGLE, val) +#define bfin_read_PORTGIO_MASKB() bfin_read16(PORTGIO_MASKB) +#define bfin_write_PORTGIO_MASKB(val) bfin_write16(PORTGIO_MASKB, val) +#define bfin_read_PORTGIO_MASKB_CLEAR() bfin_read16(PORTGIO_MASKB_CLEAR) +#define bfin_write_PORTGIO_MASKB_CLEAR(val) bfin_write16(PORTGIO_MASKB_CLEAR, val) +#define bfin_read_PORTGIO_MASKB_SET() bfin_read16(PORTGIO_MASKB_SET) +#define bfin_write_PORTGIO_MASKB_SET(val) bfin_write16(PORTGIO_MASKB_SET, val) +#define bfin_read_PORTGIO_MASKB_TOGGLE() bfin_read16(PORTGIO_MASKB_TOGGLE) +#define bfin_write_PORTGIO_MASKB_TOGGLE(val) bfin_write16(PORTGIO_MASKB_TOGGLE, val) +#define bfin_read_PORTGIO_DIR() bfin_read16(PORTGIO_DIR) +#define bfin_write_PORTGIO_DIR(val) bfin_write16(PORTGIO_DIR, val) +#define bfin_read_PORTGIO_POLAR() bfin_read16(PORTGIO_POLAR) +#define bfin_write_PORTGIO_POLAR(val) bfin_write16(PORTGIO_POLAR, val) +#define bfin_read_PORTGIO_EDGE() bfin_read16(PORTGIO_EDGE) +#define bfin_write_PORTGIO_EDGE(val) bfin_write16(PORTGIO_EDGE, val) +#define bfin_read_PORTGIO_BOTH() bfin_read16(PORTGIO_BOTH) +#define bfin_write_PORTGIO_BOTH(val) bfin_write16(PORTGIO_BOTH, val) +#define bfin_read_PORTGIO_INEN() bfin_read16(PORTGIO_INEN) +#define bfin_write_PORTGIO_INEN(val) bfin_write16(PORTGIO_INEN, val) + + +/* General Purpose I/O Port H (0xFFC01700 - 0xFFC017FF) */ +#define bfin_read_PORTHIO() bfin_read16(PORTHIO) +#define bfin_write_PORTHIO(val) bfin_write16(PORTHIO, val) +#define bfin_read_PORTHIO_CLEAR() bfin_read16(PORTHIO_CLEAR) +#define bfin_write_PORTHIO_CLEAR(val) bfin_write16(PORTHIO_CLEAR, val) +#define bfin_read_PORTHIO_SET() bfin_read16(PORTHIO_SET) +#define bfin_write_PORTHIO_SET(val) bfin_write16(PORTHIO_SET, val) +#define bfin_read_PORTHIO_TOGGLE() bfin_read16(PORTHIO_TOGGLE) +#define bfin_write_PORTHIO_TOGGLE(val) bfin_write16(PORTHIO_TOGGLE, val) +#define bfin_read_PORTHIO_MASKA() bfin_read16(PORTHIO_MASKA) +#define bfin_write_PORTHIO_MASKA(val) bfin_write16(PORTHIO_MASKA, val) +#define bfin_read_PORTHIO_MASKA_CLEAR() bfin_read16(PORTHIO_MASKA_CLEAR) +#define bfin_write_PORTHIO_MASKA_CLEAR(val) bfin_write16(PORTHIO_MASKA_CLEAR, val) +#define bfin_read_PORTHIO_MASKA_SET() bfin_read16(PORTHIO_MASKA_SET) +#define bfin_write_PORTHIO_MASKA_SET(val) bfin_write16(PORTHIO_MASKA_SET, val) +#define bfin_read_PORTHIO_MASKA_TOGGLE() bfin_read16(PORTHIO_MASKA_TOGGLE) +#define bfin_write_PORTHIO_MASKA_TOGGLE(val) bfin_write16(PORTHIO_MASKA_TOGGLE, val) +#define bfin_read_PORTHIO_MASKB() bfin_read16(PORTHIO_MASKB) +#define bfin_write_PORTHIO_MASKB(val) bfin_write16(PORTHIO_MASKB, val) +#define bfin_read_PORTHIO_MASKB_CLEAR() bfin_read16(PORTHIO_MASKB_CLEAR) +#define bfin_write_PORTHIO_MASKB_CLEAR(val) bfin_write16(PORTHIO_MASKB_CLEAR, val) +#define bfin_read_PORTHIO_MASKB_SET() bfin_read16(PORTHIO_MASKB_SET) +#define bfin_write_PORTHIO_MASKB_SET(val) bfin_write16(PORTHIO_MASKB_SET, val) +#define bfin_read_PORTHIO_MASKB_TOGGLE() bfin_read16(PORTHIO_MASKB_TOGGLE) +#define bfin_write_PORTHIO_MASKB_TOGGLE(val) bfin_write16(PORTHIO_MASKB_TOGGLE, val) +#define bfin_read_PORTHIO_DIR() bfin_read16(PORTHIO_DIR) +#define bfin_write_PORTHIO_DIR(val) bfin_write16(PORTHIO_DIR, val) +#define bfin_read_PORTHIO_POLAR() bfin_read16(PORTHIO_POLAR) +#define bfin_write_PORTHIO_POLAR(val) bfin_write16(PORTHIO_POLAR, val) +#define bfin_read_PORTHIO_EDGE() bfin_read16(PORTHIO_EDGE) +#define bfin_write_PORTHIO_EDGE(val) bfin_write16(PORTHIO_EDGE, val) +#define bfin_read_PORTHIO_BOTH() bfin_read16(PORTHIO_BOTH) +#define bfin_write_PORTHIO_BOTH(val) bfin_write16(PORTHIO_BOTH, val) +#define bfin_read_PORTHIO_INEN() bfin_read16(PORTHIO_INEN) +#define bfin_write_PORTHIO_INEN(val) bfin_write16(PORTHIO_INEN, val) + + +/* UART1 Controller (0xFFC02000 - 0xFFC020FF) */ +#define bfin_read_UART1_THR() bfin_read16(UART1_THR) +#define bfin_write_UART1_THR(val) bfin_write16(UART1_THR, val) +#define bfin_read_UART1_RBR() bfin_read16(UART1_RBR) +#define bfin_write_UART1_RBR(val) bfin_write16(UART1_RBR, val) +#define bfin_read_UART1_DLL() bfin_read16(UART1_DLL) +#define bfin_write_UART1_DLL(val) bfin_write16(UART1_DLL, val) +#define bfin_read_UART1_IER() bfin_read16(UART1_IER) +#define bfin_write_UART1_IER(val) bfin_write16(UART1_IER, val) +#define bfin_read_UART1_DLH() bfin_read16(UART1_DLH) +#define bfin_write_UART1_DLH(val) bfin_write16(UART1_DLH, val) +#define bfin_read_UART1_IIR() bfin_read16(UART1_IIR) +#define bfin_write_UART1_IIR(val) bfin_write16(UART1_IIR, val) +#define bfin_read_UART1_LCR() bfin_read16(UART1_LCR) +#define bfin_write_UART1_LCR(val) bfin_write16(UART1_LCR, val) +#define bfin_read_UART1_MCR() bfin_read16(UART1_MCR) +#define bfin_write_UART1_MCR(val) bfin_write16(UART1_MCR, val) +#define bfin_read_UART1_LSR() bfin_read16(UART1_LSR) +#define bfin_write_UART1_LSR(val) bfin_write16(UART1_LSR, val) +#define bfin_read_UART1_MSR() bfin_read16(UART1_MSR) +#define bfin_write_UART1_MSR(val) bfin_write16(UART1_MSR, val) +#define bfin_read_UART1_SCR() bfin_read16(UART1_SCR) +#define bfin_write_UART1_SCR(val) bfin_write16(UART1_SCR, val) +#define bfin_read_UART1_GCTL() bfin_read16(UART1_GCTL) +#define bfin_write_UART1_GCTL(val) bfin_write16(UART1_GCTL, val) + +/* Omit CAN register sets from the cdefBF534.h (CAN is not in the ADSP-BF52x processor) */ + +/* Pin Control Registers (0xFFC03200 - 0xFFC032FF) */ +#define bfin_read_PORTF_FER() bfin_read16(PORTF_FER) +#define bfin_write_PORTF_FER(val) bfin_write16(PORTF_FER, val) +#define bfin_read_PORTG_FER() bfin_read16(PORTG_FER) +#define bfin_write_PORTG_FER(val) bfin_write16(PORTG_FER, val) +#define bfin_read_PORTH_FER() bfin_read16(PORTH_FER) +#define bfin_write_PORTH_FER(val) bfin_write16(PORTH_FER, val) +#define bfin_read_PORT_MUX() bfin_read16(PORT_MUX) +#define bfin_write_PORT_MUX(val) bfin_write16(PORT_MUX, val) + + +/* Handshake MDMA Registers (0xFFC03300 - 0xFFC033FF) */ +#define bfin_read_HMDMA0_CONTROL() bfin_read16(HMDMA0_CONTROL) +#define bfin_write_HMDMA0_CONTROL(val) bfin_write16(HMDMA0_CONTROL, val) +#define bfin_read_HMDMA0_ECINIT() bfin_read16(HMDMA0_ECINIT) +#define bfin_write_HMDMA0_ECINIT(val) bfin_write16(HMDMA0_ECINIT, val) +#define bfin_read_HMDMA0_BCINIT() bfin_read16(HMDMA0_BCINIT) +#define bfin_write_HMDMA0_BCINIT(val) bfin_write16(HMDMA0_BCINIT, val) +#define bfin_read_HMDMA0_ECURGENT() bfin_read16(HMDMA0_ECURGENT) +#define bfin_write_HMDMA0_ECURGENT(val) bfin_write16(HMDMA0_ECURGENT, val) +#define bfin_read_HMDMA0_ECOVERFLOW() bfin_read16(HMDMA0_ECOVERFLOW) +#define bfin_write_HMDMA0_ECOVERFLOW(val) bfin_write16(HMDMA0_ECOVERFLOW, val) +#define bfin_read_HMDMA0_ECOUNT() bfin_read16(HMDMA0_ECOUNT) +#define bfin_write_HMDMA0_ECOUNT(val) bfin_write16(HMDMA0_ECOUNT, val) +#define bfin_read_HMDMA0_BCOUNT() bfin_read16(HMDMA0_BCOUNT) +#define bfin_write_HMDMA0_BCOUNT(val) bfin_write16(HMDMA0_BCOUNT, val) + +#define bfin_read_HMDMA1_CONTROL() bfin_read16(HMDMA1_CONTROL) +#define bfin_write_HMDMA1_CONTROL(val) bfin_write16(HMDMA1_CONTROL, val) +#define bfin_read_HMDMA1_ECINIT() bfin_read16(HMDMA1_ECINIT) +#define bfin_write_HMDMA1_ECINIT(val) bfin_write16(HMDMA1_ECINIT, val) +#define bfin_read_HMDMA1_BCINIT() bfin_read16(HMDMA1_BCINIT) +#define bfin_write_HMDMA1_BCINIT(val) bfin_write16(HMDMA1_BCINIT, val) +#define bfin_read_HMDMA1_ECURGENT() bfin_read16(HMDMA1_ECURGENT) +#define bfin_write_HMDMA1_ECURGENT(val) bfin_write16(HMDMA1_ECURGENT, val) +#define bfin_read_HMDMA1_ECOVERFLOW() bfin_read16(HMDMA1_ECOVERFLOW) +#define bfin_write_HMDMA1_ECOVERFLOW(val) bfin_write16(HMDMA1_ECOVERFLOW, val) +#define bfin_read_HMDMA1_ECOUNT() bfin_read16(HMDMA1_ECOUNT) +#define bfin_write_HMDMA1_ECOUNT(val) bfin_write16(HMDMA1_ECOUNT, val) +#define bfin_read_HMDMA1_BCOUNT() bfin_read16(HMDMA1_BCOUNT) +#define bfin_write_HMDMA1_BCOUNT(val) bfin_write16(HMDMA1_BCOUNT, val) + +/* ==== end from cdefBF534.h ==== */ + +/* GPIO PIN mux (0xFFC03210 - OxFFC03288) */ + +#define bfin_read_PORTF_MUX() bfin_read16(PORTF_MUX) +#define bfin_write_PORTF_MUX(val) bfin_write16(PORTF_MUX, val) +#define bfin_read_PORTG_MUX() bfin_read16(PORTG_MUX) +#define bfin_write_PORTG_MUX(val) bfin_write16(PORTG_MUX, val) +#define bfin_read_PORTH_MUX() bfin_read16(PORTH_MUX) +#define bfin_write_PORTH_MUX(val) bfin_write16(PORTH_MUX, val) + +#define bfin_read_PORTF_DRIVE() bfin_read16(PORTF_DRIVE) +#define bfin_write_PORTF_DRIVE(val) bfin_write16(PORTF_DRIVE, val) +#define bfin_read_PORTG_DRIVE() bfin_read16(PORTG_DRIVE) +#define bfin_write_PORTG_DRIVE(val) bfin_write16(PORTG_DRIVE, val) +#define bfin_read_PORTH_DRIVE() bfin_read16(PORTH_DRIVE) +#define bfin_write_PORTH_DRIVE(val) bfin_write16(PORTH_DRIVE, val) +#define bfin_read_PORTF_SLEW() bfin_read16(PORTF_SLEW) +#define bfin_write_PORTF_SLEW(val) bfin_write16(PORTF_SLEW, val) +#define bfin_read_PORTG_SLEW() bfin_read16(PORTG_SLEW) +#define bfin_write_PORTG_SLEW(val) bfin_write16(PORTG_SLEW, val) +#define bfin_read_PORTH_SLEW() bfin_read16(PORTH_SLEW) +#define bfin_write_PORTH_SLEW(val) bfin_write16(PORTH_SLEW, val) +#define bfin_read_PORTF_HYSTERISIS() bfin_read16(PORTF_HYSTERISIS) +#define bfin_write_PORTF_HYSTERISIS(val) bfin_write16(PORTF_HYSTERISIS, val) +#define bfin_read_PORTG_HYSTERISIS() bfin_read16(PORTG_HYSTERISIS) +#define bfin_write_PORTG_HYSTERISIS(val) bfin_write16(PORTG_HYSTERISIS, val) +#define bfin_read_PORTH_HYSTERISIS() bfin_read16(PORTH_HYSTERISIS) +#define bfin_write_PORTH_HYSTERISIS(val) bfin_write16(PORTH_HYSTERISIS, val) +#define bfin_read_MISCPORT_DRIVE() bfin_read16(MISCPORT_DRIVE) +#define bfin_write_MISCPORT_DRIVE(val) bfin_write16(MISCPORT_DRIVE, val) +#define bfin_read_MISCPORT_SLEW() bfin_read16(MISCPORT_SLEW) +#define bfin_write_MISCPORT_SLEW(val) bfin_write16(MISCPORT_SLEW, val) +#define bfin_read_MISCPORT_HYSTERISIS() bfin_read16(MISCPORT_HYSTERISIS) +#define bfin_write_MISCPORT_HYSTERISIS(val) bfin_write16(MISCPORT_HYSTERISIS, val) + +/* HOST Port Registers */ + +#define bfin_read_HOST_CONTROL() bfin_read16(HOST_CONTROL) +#define bfin_write_HOST_CONTROL(val) bfin_write16(HOST_CONTROL, val) +#define bfin_read_HOST_STATUS() bfin_read16(HOST_STATUS) +#define bfin_write_HOST_STATUS(val) bfin_write16(HOST_STATUS, val) +#define bfin_read_HOST_TIMEOUT() bfin_read16(HOST_TIMEOUT) +#define bfin_write_HOST_TIMEOUT(val) bfin_write16(HOST_TIMEOUT, val) + +/* Counter Registers */ + +#define bfin_read_CNT_CONFIG() bfin_read16(CNT_CONFIG) +#define bfin_write_CNT_CONFIG(val) bfin_write16(CNT_CONFIG, val) +#define bfin_read_CNT_IMASK() bfin_read16(CNT_IMASK) +#define bfin_write_CNT_IMASK(val) bfin_write16(CNT_IMASK, val) +#define bfin_read_CNT_STATUS() bfin_read16(CNT_STATUS) +#define bfin_write_CNT_STATUS(val) bfin_write16(CNT_STATUS, val) +#define bfin_read_CNT_COMMAND() bfin_read16(CNT_COMMAND) +#define bfin_write_CNT_COMMAND(val) bfin_write16(CNT_COMMAND, val) +#define bfin_read_CNT_DEBOUNCE() bfin_read16(CNT_DEBOUNCE) +#define bfin_write_CNT_DEBOUNCE(val) bfin_write16(CNT_DEBOUNCE, val) +#define bfin_read_CNT_COUNTER() bfin_read32(CNT_COUNTER) +#define bfin_write_CNT_COUNTER(val) bfin_write32(CNT_COUNTER, val) +#define bfin_read_CNT_MAX() bfin_read32(CNT_MAX) +#define bfin_write_CNT_MAX(val) bfin_write32(CNT_MAX, val) +#define bfin_read_CNT_MIN() bfin_read32(CNT_MIN) +#define bfin_write_CNT_MIN(val) bfin_write32(CNT_MIN, val) + +/* OTP/FUSE Registers */ + +#define bfin_read_OTP_CONTROL() bfin_read16(OTP_CONTROL) +#define bfin_write_OTP_CONTROL(val) bfin_write16(OTP_CONTROL, val) +#define bfin_read_OTP_BEN() bfin_read16(OTP_BEN) +#define bfin_write_OTP_BEN(val) bfin_write16(OTP_BEN, val) +#define bfin_read_OTP_STATUS() bfin_read16(OTP_STATUS) +#define bfin_write_OTP_STATUS(val) bfin_write16(OTP_STATUS, val) +#define bfin_read_OTP_TIMING() bfin_read32(OTP_TIMING) +#define bfin_write_OTP_TIMING(val) bfin_write32(OTP_TIMING, val) + +/* Security Registers */ + +#define bfin_read_SECURE_SYSSWT() bfin_read32(SECURE_SYSSWT) +#define bfin_write_SECURE_SYSSWT(val) bfin_write32(SECURE_SYSSWT, val) +#define bfin_read_SECURE_CONTROL() bfin_read16(SECURE_CONTROL) +#define bfin_write_SECURE_CONTROL(val) bfin_write16(SECURE_CONTROL, val) +#define bfin_read_SECURE_STATUS() bfin_read16(SECURE_STATUS) +#define bfin_write_SECURE_STATUS(val) bfin_write16(SECURE_STATUS, val) + +/* OTP Read/Write Data Buffer Registers */ + +#define bfin_read_OTP_DATA0() bfin_read32(OTP_DATA0) +#define bfin_write_OTP_DATA0(val) bfin_write32(OTP_DATA0, val) +#define bfin_read_OTP_DATA1() bfin_read32(OTP_DATA1) +#define bfin_write_OTP_DATA1(val) bfin_write32(OTP_DATA1, val) +#define bfin_read_OTP_DATA2() bfin_read32(OTP_DATA2) +#define bfin_write_OTP_DATA2(val) bfin_write32(OTP_DATA2, val) +#define bfin_read_OTP_DATA3() bfin_read32(OTP_DATA3) +#define bfin_write_OTP_DATA3(val) bfin_write32(OTP_DATA3, val) + +/* NFC Registers */ + +#define bfin_read_NFC_CTL() bfin_read16(NFC_CTL) +#define bfin_write_NFC_CTL(val) bfin_write16(NFC_CTL, val) +#define bfin_read_NFC_STAT() bfin_read16(NFC_STAT) +#define bfin_write_NFC_STAT(val) bfin_write16(NFC_STAT, val) +#define bfin_read_NFC_IRQSTAT() bfin_read16(NFC_IRQSTAT) +#define bfin_write_NFC_IRQSTAT(val) bfin_write16(NFC_IRQSTAT, val) +#define bfin_read_NFC_IRQMASK() bfin_read16(NFC_IRQMASK) +#define bfin_write_NFC_IRQMASK(val) bfin_write16(NFC_IRQMASK, val) +#define bfin_read_NFC_ECC0() bfin_read16(NFC_ECC0) +#define bfin_write_NFC_ECC0(val) bfin_write16(NFC_ECC0, val) +#define bfin_read_NFC_ECC1() bfin_read16(NFC_ECC1) +#define bfin_write_NFC_ECC1(val) bfin_write16(NFC_ECC1, val) +#define bfin_read_NFC_ECC2() bfin_read16(NFC_ECC2) +#define bfin_write_NFC_ECC2(val) bfin_write16(NFC_ECC2, val) +#define bfin_read_NFC_ECC3() bfin_read16(NFC_ECC3) +#define bfin_write_NFC_ECC3(val) bfin_write16(NFC_ECC3, val) +#define bfin_read_NFC_COUNT() bfin_read16(NFC_COUNT) +#define bfin_write_NFC_COUNT(val) bfin_write16(NFC_COUNT, val) +#define bfin_read_NFC_RST() bfin_read16(NFC_RST) +#define bfin_write_NFC_RST(val) bfin_write16(NFC_RST, val) +#define bfin_read_NFC_PGCTL() bfin_read16(NFC_PGCTL) +#define bfin_write_NFC_PGCTL(val) bfin_write16(NFC_PGCTL, val) +#define bfin_read_NFC_READ() bfin_read16(NFC_READ) +#define bfin_write_NFC_READ(val) bfin_write16(NFC_READ, val) +#define bfin_read_NFC_ADDR() bfin_read16(NFC_ADDR) +#define bfin_write_NFC_ADDR(val) bfin_write16(NFC_ADDR, val) +#define bfin_read_NFC_CMD() bfin_read16(NFC_CMD) +#define bfin_write_NFC_CMD(val) bfin_write16(NFC_CMD, val) +#define bfin_read_NFC_DATA_WR() bfin_read16(NFC_DATA_WR) +#define bfin_write_NFC_DATA_WR(val) bfin_write16(NFC_DATA_WR, val) +#define bfin_read_NFC_DATA_RD() bfin_read16(NFC_DATA_RD) +#define bfin_write_NFC_DATA_RD(val) bfin_write16(NFC_DATA_RD, val) + +#endif /* _CDEF_BF52X_H */ diff --git a/include/asm-blackfin/mach-bf527/defBF522.h b/include/asm-blackfin/mach-bf527/defBF522.h new file mode 100644 index 00000000000000..9671d8f2c5ef0d --- /dev/null +++ b/include/asm-blackfin/mach-bf527/defBF522.h @@ -0,0 +1,42 @@ +/* + * File: include/asm-blackfin/mach-bf527/defBF522.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _DEF_BF522_H +#define _DEF_BF522_H + +/* Include all Core registers and bit definitions */ +#include <asm/mach-common/def_LPBlackfin.h> + +/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF522 */ + +/* Include defBF52x_base.h for the set of #defines that are common to all ADSP-BF52x processors */ +#include "defBF52x_base.h" + +#endif /* _DEF_BF522_H */ diff --git a/include/asm-blackfin/mach-bf527/defBF525.h b/include/asm-blackfin/mach-bf527/defBF525.h new file mode 100644 index 00000000000000..6a375a084acc2e --- /dev/null +++ b/include/asm-blackfin/mach-bf527/defBF525.h @@ -0,0 +1,713 @@ +/* + * File: include/asm-blackfin/mach-bf527/defBF525.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _DEF_BF525_H +#define _DEF_BF525_H + +/* Include all Core registers and bit definitions */ +#include <asm/mach-common/def_LPBlackfin.h> + +/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF525 */ + +/* Include defBF52x_base.h for the set of #defines that are common to all ADSP-BF52x processors */ +#include "defBF52x_base.h" + +/* The following are the #defines needed by ADSP-BF525 that are not in the common header */ + +/* USB Control Registers */ + +#define USB_FADDR 0xffc03800 /* Function address register */ +#define USB_POWER 0xffc03804 /* Power management register */ +#define USB_INTRTX 0xffc03808 /* Interrupt register for endpoint 0 and Tx endpoint 1 to 7 */ +#define USB_INTRRX 0xffc0380c /* Interrupt register for Rx endpoints 1 to 7 */ +#define USB_INTRTXE 0xffc03810 /* Interrupt enable register for IntrTx */ +#define USB_INTRRXE 0xffc03814 /* Interrupt enable register for IntrRx */ +#define USB_INTRUSB 0xffc03818 /* Interrupt register for common USB interrupts */ +#define USB_INTRUSBE 0xffc0381c /* Interrupt enable register for IntrUSB */ +#define USB_FRAME 0xffc03820 /* USB frame number */ +#define USB_INDEX 0xffc03824 /* Index register for selecting the indexed endpoint registers */ +#define USB_TESTMODE 0xffc03828 /* Enabled USB 20 test modes */ +#define USB_GLOBINTR 0xffc0382c /* Global Interrupt Mask register and Wakeup Exception Interrupt */ +#define USB_GLOBAL_CTL 0xffc03830 /* Global Clock Control for the core */ + +/* USB Packet Control Registers */ + +#define USB_TX_MAX_PACKET 0xffc03840 /* Maximum packet size for Host Tx endpoint */ +#define USB_CSR0 0xffc03844 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */ +#define USB_TXCSR 0xffc03844 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */ +#define USB_RX_MAX_PACKET 0xffc03848 /* Maximum packet size for Host Rx endpoint */ +#define USB_RXCSR 0xffc0384c /* Control Status register for Host Rx endpoint */ +#define USB_COUNT0 0xffc03850 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */ +#define USB_RXCOUNT 0xffc03850 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */ +#define USB_TXTYPE 0xffc03854 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint */ +#define USB_NAKLIMIT0 0xffc03858 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */ +#define USB_TXINTERVAL 0xffc03858 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */ +#define USB_RXTYPE 0xffc0385c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint */ +#define USB_RXINTERVAL 0xffc03860 /* Sets the polling interval for Interrupt and Isochronous transfers or the NAK response timeout on Bulk transfers */ +#define USB_TXCOUNT 0xffc03868 /* Number of bytes to be written to the selected endpoint Tx FIFO */ + +/* USB Endpoint FIFO Registers */ + +#define USB_EP0_FIFO 0xffc03880 /* Endpoint 0 FIFO */ +#define USB_EP1_FIFO 0xffc03888 /* Endpoint 1 FIFO */ +#define USB_EP2_FIFO 0xffc03890 /* Endpoint 2 FIFO */ +#define USB_EP3_FIFO 0xffc03898 /* Endpoint 3 FIFO */ +#define USB_EP4_FIFO 0xffc038a0 /* Endpoint 4 FIFO */ +#define USB_EP5_FIFO 0xffc038a8 /* Endpoint 5 FIFO */ +#define USB_EP6_FIFO 0xffc038b0 /* Endpoint 6 FIFO */ +#define USB_EP7_FIFO 0xffc038b8 /* Endpoint 7 FIFO */ + +/* USB OTG Control Registers */ + +#define USB_OTG_DEV_CTL 0xffc03900 /* OTG Device Control Register */ +#define USB_OTG_VBUS_IRQ 0xffc03904 /* OTG VBUS Control Interrupts */ +#define USB_OTG_VBUS_MASK 0xffc03908 /* VBUS Control Interrupt Enable */ + +/* USB Phy Control Registers */ + +#define USB_LINKINFO 0xffc03948 /* Enables programming of some PHY-side delays */ +#define USB_VPLEN 0xffc0394c /* Determines duration of VBUS pulse for VBUS charging */ +#define USB_HS_EOF1 0xffc03950 /* Time buffer for High-Speed transactions */ +#define USB_FS_EOF1 0xffc03954 /* Time buffer for Full-Speed transactions */ +#define USB_LS_EOF1 0xffc03958 /* Time buffer for Low-Speed transactions */ + +/* (APHY_CNTRL is for ADI usage only) */ + +#define USB_APHY_CNTRL 0xffc039e0 /* Register that increases visibility of Analog PHY */ + +/* (APHY_CALIB is for ADI usage only) */ + +#define USB_APHY_CALIB 0xffc039e4 /* Register used to set some calibration values */ + +#define USB_APHY_CNTRL2 0xffc039e8 /* Register used to prevent re-enumeration once Moab goes into hibernate mode */ + +/* (PHY_TEST is for ADI usage only) */ + +#define USB_PHY_TEST 0xffc039ec /* Used for reducing simulation time and simplifies FIFO testability */ + +#define USB_PLLOSC_CTRL 0xffc039f0 /* Used to program different parameters for USB PLL and Oscillator */ +#define USB_SRP_CLKDIV 0xffc039f4 /* Used to program clock divide value for the clock fed to the SRP detection logic */ + +/* USB Endpoint 0 Control Registers */ + +#define USB_EP_NI0_TXMAXP 0xffc03a00 /* Maximum packet size for Host Tx endpoint0 */ +#define USB_EP_NI0_TXCSR 0xffc03a04 /* Control Status register for endpoint 0 */ +#define USB_EP_NI0_RXMAXP 0xffc03a08 /* Maximum packet size for Host Rx endpoint0 */ +#define USB_EP_NI0_RXCSR 0xffc03a0c /* Control Status register for Host Rx endpoint0 */ +#define USB_EP_NI0_RXCOUNT 0xffc03a10 /* Number of bytes received in endpoint 0 FIFO */ +#define USB_EP_NI0_TXTYPE 0xffc03a14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint0 */ +#define USB_EP_NI0_TXINTERVAL 0xffc03a18 /* Sets the NAK response timeout on Endpoint 0 */ +#define USB_EP_NI0_RXTYPE 0xffc03a1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint0 */ +#define USB_EP_NI0_RXINTERVAL 0xffc03a20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint0 */ +#define USB_EP_NI0_TXCOUNT 0xffc03a28 /* Number of bytes to be written to the endpoint0 Tx FIFO */ + +/* USB Endpoint 1 Control Registers */ + +#define USB_EP_NI1_TXMAXP 0xffc03a40 /* Maximum packet size for Host Tx endpoint1 */ +#define USB_EP_NI1_TXCSR 0xffc03a44 /* Control Status register for endpoint1 */ +#define USB_EP_NI1_RXMAXP 0xffc03a48 /* Maximum packet size for Host Rx endpoint1 */ +#define USB_EP_NI1_RXCSR 0xffc03a4c /* Control Status register for Host Rx endpoint1 */ +#define USB_EP_NI1_RXCOUNT 0xffc03a50 /* Number of bytes received in endpoint1 FIFO */ +#define USB_EP_NI1_TXTYPE 0xffc03a54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint1 */ +#define USB_EP_NI1_TXINTERVAL 0xffc03a58 /* Sets the NAK response timeout on Endpoint1 */ +#define USB_EP_NI1_RXTYPE 0xffc03a5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint1 */ +#define USB_EP_NI1_RXINTERVAL 0xffc03a60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint1 */ +#define USB_EP_NI1_TXCOUNT 0xffc03a68 /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */ + +/* USB Endpoint 2 Control Registers */ + +#define USB_EP_NI2_TXMAXP 0xffc03a80 /* Maximum packet size for Host Tx endpoint2 */ +#define USB_EP_NI2_TXCSR 0xffc03a84 /* Control Status register for endpoint2 */ +#define USB_EP_NI2_RXMAXP 0xffc03a88 /* Maximum packet size for Host Rx endpoint2 */ +#define USB_EP_NI2_RXCSR 0xffc03a8c /* Control Status register for Host Rx endpoint2 */ +#define USB_EP_NI2_RXCOUNT 0xffc03a90 /* Number of bytes received in endpoint2 FIFO */ +#define USB_EP_NI2_TXTYPE 0xffc03a94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint2 */ +#define USB_EP_NI2_TXINTERVAL 0xffc03a98 /* Sets the NAK response timeout on Endpoint2 */ +#define USB_EP_NI2_RXTYPE 0xffc03a9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint2 */ +#define USB_EP_NI2_RXINTERVAL 0xffc03aa0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint2 */ +#define USB_EP_NI2_TXCOUNT 0xffc03aa8 /* Number of bytes to be written to the endpoint2 Tx FIFO */ + +/* USB Endpoint 3 Control Registers */ + +#define USB_EP_NI3_TXMAXP 0xffc03ac0 /* Maximum packet size for Host Tx endpoint3 */ +#define USB_EP_NI3_TXCSR 0xffc03ac4 /* Control Status register for endpoint3 */ +#define USB_EP_NI3_RXMAXP 0xffc03ac8 /* Maximum packet size for Host Rx endpoint3 */ +#define USB_EP_NI3_RXCSR 0xffc03acc /* Control Status register for Host Rx endpoint3 */ +#define USB_EP_NI3_RXCOUNT 0xffc03ad0 /* Number of bytes received in endpoint3 FIFO */ +#define USB_EP_NI3_TXTYPE 0xffc03ad4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint3 */ +#define USB_EP_NI3_TXINTERVAL 0xffc03ad8 /* Sets the NAK response timeout on Endpoint3 */ +#define USB_EP_NI3_RXTYPE 0xffc03adc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint3 */ +#define USB_EP_NI3_RXINTERVAL 0xffc03ae0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint3 */ +#define USB_EP_NI3_TXCOUNT 0xffc03ae8 /* Number of bytes to be written to the H124endpoint3 Tx FIFO */ + +/* USB Endpoint 4 Control Registers */ + +#define USB_EP_NI4_TXMAXP 0xffc03b00 /* Maximum packet size for Host Tx endpoint4 */ +#define USB_EP_NI4_TXCSR 0xffc03b04 /* Control Status register for endpoint4 */ +#define USB_EP_NI4_RXMAXP 0xffc03b08 /* Maximum packet size for Host Rx endpoint4 */ +#define USB_EP_NI4_RXCSR 0xffc03b0c /* Control Status register for Host Rx endpoint4 */ +#define USB_EP_NI4_RXCOUNT 0xffc03b10 /* Number of bytes received in endpoint4 FIFO */ +#define USB_EP_NI4_TXTYPE 0xffc03b14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint4 */ +#define USB_EP_NI4_TXINTERVAL 0xffc03b18 /* Sets the NAK response timeout on Endpoint4 */ +#define USB_EP_NI4_RXTYPE 0xffc03b1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint4 */ +#define USB_EP_NI4_RXINTERVAL 0xffc03b20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint4 */ +#define USB_EP_NI4_TXCOUNT 0xffc03b28 /* Number of bytes to be written to the endpoint4 Tx FIFO */ + +/* USB Endpoint 5 Control Registers */ + +#define USB_EP_NI5_TXMAXP 0xffc03b40 /* Maximum packet size for Host Tx endpoint5 */ +#define USB_EP_NI5_TXCSR 0xffc03b44 /* Control Status register for endpoint5 */ +#define USB_EP_NI5_RXMAXP 0xffc03b48 /* Maximum packet size for Host Rx endpoint5 */ +#define USB_EP_NI5_RXCSR 0xffc03b4c /* Control Status register for Host Rx endpoint5 */ +#define USB_EP_NI5_RXCOUNT 0xffc03b50 /* Number of bytes received in endpoint5 FIFO */ +#define USB_EP_NI5_TXTYPE 0xffc03b54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint5 */ +#define USB_EP_NI5_TXINTERVAL 0xffc03b58 /* Sets the NAK response timeout on Endpoint5 */ +#define USB_EP_NI5_RXTYPE 0xffc03b5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint5 */ +#define USB_EP_NI5_RXINTERVAL 0xffc03b60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint5 */ +#define USB_EP_NI5_TXCOUNT 0xffc03b68 /* Number of bytes to be written to the endpoint5 Tx FIFO */ + +/* USB Endpoint 6 Control Registers */ + +#define USB_EP_NI6_TXMAXP 0xffc03b80 /* Maximum packet size for Host Tx endpoint6 */ +#define USB_EP_NI6_TXCSR 0xffc03b84 /* Control Status register for endpoint6 */ +#define USB_EP_NI6_RXMAXP 0xffc03b88 /* Maximum packet size for Host Rx endpoint6 */ +#define USB_EP_NI6_RXCSR 0xffc03b8c /* Control Status register for Host Rx endpoint6 */ +#define USB_EP_NI6_RXCOUNT 0xffc03b90 /* Number of bytes received in endpoint6 FIFO */ +#define USB_EP_NI6_TXTYPE 0xffc03b94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint6 */ +#define USB_EP_NI6_TXINTERVAL 0xffc03b98 /* Sets the NAK response timeout on Endpoint6 */ +#define USB_EP_NI6_RXTYPE 0xffc03b9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint6 */ +#define USB_EP_NI6_RXINTERVAL 0xffc03ba0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint6 */ +#define USB_EP_NI6_TXCOUNT 0xffc03ba8 /* Number of bytes to be written to the endpoint6 Tx FIFO */ + +/* USB Endpoint 7 Control Registers */ + +#define USB_EP_NI7_TXMAXP 0xffc03bc0 /* Maximum packet size for Host Tx endpoint7 */ +#define USB_EP_NI7_TXCSR 0xffc03bc4 /* Control Status register for endpoint7 */ +#define USB_EP_NI7_RXMAXP 0xffc03bc8 /* Maximum packet size for Host Rx endpoint7 */ +#define USB_EP_NI7_RXCSR 0xffc03bcc /* Control Status register for Host Rx endpoint7 */ +#define USB_EP_NI7_RXCOUNT 0xffc03bd0 /* Number of bytes received in endpoint7 FIFO */ +#define USB_EP_NI7_TXTYPE 0xffc03bd4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */ +#define USB_EP_NI7_TXINTERVAL 0xffc03bd8 /* Sets the NAK response timeout on Endpoint7 */ +#define USB_EP_NI7_RXTYPE 0xffc03bdc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */ +#define USB_EP_NI7_RXINTERVAL 0xffc03bf0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */ +#define USB_EP_NI7_TXCOUNT 0xffc03bf8 /* Number of bytes to be written to the endpoint7 Tx FIFO */ + +#define USB_DMA_INTERRUPT 0xffc03c00 /* Indicates pending interrupts for the DMA channels */ + +/* USB Channel 0 Config Registers */ + +#define USB_DMA0CONTROL 0xffc03c04 /* DMA master channel 0 configuration */ +#define USB_DMA0ADDRLOW 0xffc03c08 /* Lower 16-bits of memory source/destination address for DMA master channel 0 */ +#define USB_DMA0ADDRHIGH 0xffc03c0c /* Upper 16-bits of memory source/destination address for DMA master channel 0 */ +#define USB_DMA0COUNTLOW 0xffc03c10 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 0 */ +#define USB_DMA0COUNTHIGH 0xffc03c14 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 0 */ + +/* USB Channel 1 Config Registers */ + +#define USB_DMA1CONTROL 0xffc03c24 /* DMA master channel 1 configuration */ +#define USB_DMA1ADDRLOW 0xffc03c28 /* Lower 16-bits of memory source/destination address for DMA master channel 1 */ +#define USB_DMA1ADDRHIGH 0xffc03c2c /* Upper 16-bits of memory source/destination address for DMA master channel 1 */ +#define USB_DMA1COUNTLOW 0xffc03c30 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 1 */ +#define USB_DMA1COUNTHIGH 0xffc03c34 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 1 */ + +/* USB Channel 2 Config Registers */ + +#define USB_DMA2CONTROL 0xffc03c44 /* DMA master channel 2 configuration */ +#define USB_DMA2ADDRLOW 0xffc03c48 /* Lower 16-bits of memory source/destination address for DMA master channel 2 */ +#define USB_DMA2ADDRHIGH 0xffc03c4c /* Upper 16-bits of memory source/destination address for DMA master channel 2 */ +#define USB_DMA2COUNTLOW 0xffc03c50 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 2 */ +#define USB_DMA2COUNTHIGH 0xffc03c54 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 2 */ + +/* USB Channel 3 Config Registers */ + +#define USB_DMA3CONTROL 0xffc03c64 /* DMA master channel 3 configuration */ +#define USB_DMA3ADDRLOW 0xffc03c68 /* Lower 16-bits of memory source/destination address for DMA master channel 3 */ +#define USB_DMA3ADDRHIGH 0xffc03c6c /* Upper 16-bits of memory source/destination address for DMA master channel 3 */ +#define USB_DMA3COUNTLOW 0xffc03c70 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 3 */ +#define USB_DMA3COUNTHIGH 0xffc03c74 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 3 */ + +/* USB Channel 4 Config Registers */ + +#define USB_DMA4CONTROL 0xffc03c84 /* DMA master channel 4 configuration */ +#define USB_DMA4ADDRLOW 0xffc03c88 /* Lower 16-bits of memory source/destination address for DMA master channel 4 */ +#define USB_DMA4ADDRHIGH 0xffc03c8c /* Upper 16-bits of memory source/destination address for DMA master channel 4 */ +#define USB_DMA4COUNTLOW 0xffc03c90 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 4 */ +#define USB_DMA4COUNTHIGH 0xffc03c94 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 4 */ + +/* USB Channel 5 Config Registers */ + +#define USB_DMA5CONTROL 0xffc03ca4 /* DMA master channel 5 configuration */ +#define USB_DMA5ADDRLOW 0xffc03ca8 /* Lower 16-bits of memory source/destination address for DMA master channel 5 */ +#define USB_DMA5ADDRHIGH 0xffc03cac /* Upper 16-bits of memory source/destination address for DMA master channel 5 */ +#define USB_DMA5COUNTLOW 0xffc03cb0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 5 */ +#define USB_DMA5COUNTHIGH 0xffc03cb4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 5 */ + +/* USB Channel 6 Config Registers */ + +#define USB_DMA6CONTROL 0xffc03cc4 /* DMA master channel 6 configuration */ +#define USB_DMA6ADDRLOW 0xffc03cc8 /* Lower 16-bits of memory source/destination address for DMA master channel 6 */ +#define USB_DMA6ADDRHIGH 0xffc03ccc /* Upper 16-bits of memory source/destination address for DMA master channel 6 */ +#define USB_DMA6COUNTLOW 0xffc03cd0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 6 */ +#define USB_DMA6COUNTHIGH 0xffc03cd4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 6 */ + +/* USB Channel 7 Config Registers */ + +#define USB_DMA7CONTROL 0xffc03ce4 /* DMA master channel 7 configuration */ +#define USB_DMA7ADDRLOW 0xffc03ce8 /* Lower 16-bits of memory source/destination address for DMA master channel 7 */ +#define USB_DMA7ADDRHIGH 0xffc03cec /* Upper 16-bits of memory source/destination address for DMA master channel 7 */ +#define USB_DMA7COUNTLOW 0xffc03cf0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 7 */ +#define USB_DMA7COUNTHIGH 0xffc03cf4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 7 */ + +/* Bit masks for USB_FADDR */ + +#define FUNCTION_ADDRESS 0x7f /* Function address */ + +/* Bit masks for USB_POWER */ + +#define ENABLE_SUSPENDM 0x1 /* enable SuspendM output */ +#define nENABLE_SUSPENDM 0x0 +#define SUSPEND_MODE 0x2 /* Suspend Mode indicator */ +#define nSUSPEND_MODE 0x0 +#define RESUME_MODE 0x4 /* DMA Mode */ +#define nRESUME_MODE 0x0 +#define RESET 0x8 /* Reset indicator */ +#define nRESET 0x0 +#define HS_MODE 0x10 /* High Speed mode indicator */ +#define nHS_MODE 0x0 +#define HS_ENABLE 0x20 /* high Speed Enable */ +#define nHS_ENABLE 0x0 +#define SOFT_CONN 0x40 /* Soft connect */ +#define nSOFT_CONN 0x0 +#define ISO_UPDATE 0x80 /* Isochronous update */ +#define nISO_UPDATE 0x0 + +/* Bit masks for USB_INTRTX */ + +#define EP0_TX 0x1 /* Tx Endpoint 0 interrupt */ +#define nEP0_TX 0x0 +#define EP1_TX 0x2 /* Tx Endpoint 1 interrupt */ +#define nEP1_TX 0x0 +#define EP2_TX 0x4 /* Tx Endpoint 2 interrupt */ +#define nEP2_TX 0x0 +#define EP3_TX 0x8 /* Tx Endpoint 3 interrupt */ +#define nEP3_TX 0x0 +#define EP4_TX 0x10 /* Tx Endpoint 4 interrupt */ +#define nEP4_TX 0x0 +#define EP5_TX 0x20 /* Tx Endpoint 5 interrupt */ +#define nEP5_TX 0x0 +#define EP6_TX 0x40 /* Tx Endpoint 6 interrupt */ +#define nEP6_TX 0x0 +#define EP7_TX 0x80 /* Tx Endpoint 7 interrupt */ +#define nEP7_TX 0x0 + +/* Bit masks for USB_INTRRX */ + +#define EP1_RX 0x2 /* Rx Endpoint 1 interrupt */ +#define nEP1_RX 0x0 +#define EP2_RX 0x4 /* Rx Endpoint 2 interrupt */ +#define nEP2_RX 0x0 +#define EP3_RX 0x8 /* Rx Endpoint 3 interrupt */ +#define nEP3_RX 0x0 +#define EP4_RX 0x10 /* Rx Endpoint 4 interrupt */ +#define nEP4_RX 0x0 +#define EP5_RX 0x20 /* Rx Endpoint 5 interrupt */ +#define nEP5_RX 0x0 +#define EP6_RX 0x40 /* Rx Endpoint 6 interrupt */ +#define nEP6_RX 0x0 +#define EP7_RX 0x80 /* Rx Endpoint 7 interrupt */ +#define nEP7_RX 0x0 + +/* Bit masks for USB_INTRTXE */ + +#define EP0_TX_E 0x1 /* Endpoint 0 interrupt Enable */ +#define nEP0_TX_E 0x0 +#define EP1_TX_E 0x2 /* Tx Endpoint 1 interrupt Enable */ +#define nEP1_TX_E 0x0 +#define EP2_TX_E 0x4 /* Tx Endpoint 2 interrupt Enable */ +#define nEP2_TX_E 0x0 +#define EP3_TX_E 0x8 /* Tx Endpoint 3 interrupt Enable */ +#define nEP3_TX_E 0x0 +#define EP4_TX_E 0x10 /* Tx Endpoint 4 interrupt Enable */ +#define nEP4_TX_E 0x0 +#define EP5_TX_E 0x20 /* Tx Endpoint 5 interrupt Enable */ +#define nEP5_TX_E 0x0 +#define EP6_TX_E 0x40 /* Tx Endpoint 6 interrupt Enable */ +#define nEP6_TX_E 0x0 +#define EP7_TX_E 0x80 /* Tx Endpoint 7 interrupt Enable */ +#define nEP7_TX_E 0x0 + +/* Bit masks for USB_INTRRXE */ + +#define EP1_RX_E 0x2 /* Rx Endpoint 1 interrupt Enable */ +#define nEP1_RX_E 0x0 +#define EP2_RX_E 0x4 /* Rx Endpoint 2 interrupt Enable */ +#define nEP2_RX_E 0x0 +#define EP3_RX_E 0x8 /* Rx Endpoint 3 interrupt Enable */ +#define nEP3_RX_E 0x0 +#define EP4_RX_E 0x10 /* Rx Endpoint 4 interrupt Enable */ +#define nEP4_RX_E 0x0 +#define EP5_RX_E 0x20 /* Rx Endpoint 5 interrupt Enable */ +#define nEP5_RX_E 0x0 +#define EP6_RX_E 0x40 /* Rx Endpoint 6 interrupt Enable */ +#define nEP6_RX_E 0x0 +#define EP7_RX_E 0x80 /* Rx Endpoint 7 interrupt Enable */ +#define nEP7_RX_E 0x0 + +/* Bit masks for USB_INTRUSB */ + +#define SUSPEND_B 0x1 /* Suspend indicator */ +#define nSUSPEND_B 0x0 +#define RESUME_B 0x2 /* Resume indicator */ +#define nRESUME_B 0x0 +#define RESET_OR_BABLE_B 0x4 /* Reset/babble indicator */ +#define nRESET_OR_BABLE_B 0x0 +#define SOF_B 0x8 /* Start of frame */ +#define nSOF_B 0x0 +#define CONN_B 0x10 /* Connection indicator */ +#define nCONN_B 0x0 +#define DISCON_B 0x20 /* Disconnect indicator */ +#define nDISCON_B 0x0 +#define SESSION_REQ_B 0x40 /* Session Request */ +#define nSESSION_REQ_B 0x0 +#define VBUS_ERROR_B 0x80 /* Vbus threshold indicator */ +#define nVBUS_ERROR_B 0x0 + +/* Bit masks for USB_INTRUSBE */ + +#define SUSPEND_BE 0x1 /* Suspend indicator int enable */ +#define nSUSPEND_BE 0x0 +#define RESUME_BE 0x2 /* Resume indicator int enable */ +#define nRESUME_BE 0x0 +#define RESET_OR_BABLE_BE 0x4 /* Reset/babble indicator int enable */ +#define nRESET_OR_BABLE_BE 0x0 +#define SOF_BE 0x8 /* Start of frame int enable */ +#define nSOF_BE 0x0 +#define CONN_BE 0x10 /* Connection indicator int enable */ +#define nCONN_BE 0x0 +#define DISCON_BE 0x20 /* Disconnect indicator int enable */ +#define nDISCON_BE 0x0 +#define SESSION_REQ_BE 0x40 /* Session Request int enable */ +#define nSESSION_REQ_BE 0x0 +#define VBUS_ERROR_BE 0x80 /* Vbus threshold indicator int enable */ +#define nVBUS_ERROR_BE 0x0 + +/* Bit masks for USB_FRAME */ + +#define FRAME_NUMBER 0x7ff /* Frame number */ + +/* Bit masks for USB_INDEX */ + +#define SELECTED_ENDPOINT 0xf /* selected endpoint */ + +/* Bit masks for USB_GLOBAL_CTL */ + +#define GLOBAL_ENA 0x1 /* enables USB module */ +#define nGLOBAL_ENA 0x0 +#define EP1_TX_ENA 0x2 /* Transmit endpoint 1 enable */ +#define nEP1_TX_ENA 0x0 +#define EP2_TX_ENA 0x4 /* Transmit endpoint 2 enable */ +#define nEP2_TX_ENA 0x0 +#define EP3_TX_ENA 0x8 /* Transmit endpoint 3 enable */ +#define nEP3_TX_ENA 0x0 +#define EP4_TX_ENA 0x10 /* Transmit endpoint 4 enable */ +#define nEP4_TX_ENA 0x0 +#define EP5_TX_ENA 0x20 /* Transmit endpoint 5 enable */ +#define nEP5_TX_ENA 0x0 +#define EP6_TX_ENA 0x40 /* Transmit endpoint 6 enable */ +#define nEP6_TX_ENA 0x0 +#define EP7_TX_ENA 0x80 /* Transmit endpoint 7 enable */ +#define nEP7_TX_ENA 0x0 +#define EP1_RX_ENA 0x100 /* Receive endpoint 1 enable */ +#define nEP1_RX_ENA 0x0 +#define EP2_RX_ENA 0x200 /* Receive endpoint 2 enable */ +#define nEP2_RX_ENA 0x0 +#define EP3_RX_ENA 0x400 /* Receive endpoint 3 enable */ +#define nEP3_RX_ENA 0x0 +#define EP4_RX_ENA 0x800 /* Receive endpoint 4 enable */ +#define nEP4_RX_ENA 0x0 +#define EP5_RX_ENA 0x1000 /* Receive endpoint 5 enable */ +#define nEP5_RX_ENA 0x0 +#define EP6_RX_ENA 0x2000 /* Receive endpoint 6 enable */ +#define nEP6_RX_ENA 0x0 +#define EP7_RX_ENA 0x4000 /* Receive endpoint 7 enable */ +#define nEP7_RX_ENA 0x0 + +/* Bit masks for USB_OTG_DEV_CTL */ + +#define SESSION 0x1 /* session indicator */ +#define nSESSION 0x0 +#define HOST_REQ 0x2 /* Host negotiation request */ +#define nHOST_REQ 0x0 +#define HOST_MODE 0x4 /* indicates USBDRC is a host */ +#define nHOST_MODE 0x0 +#define VBUS0 0x8 /* Vbus level indicator[0] */ +#define nVBUS0 0x0 +#define VBUS1 0x10 /* Vbus level indicator[1] */ +#define nVBUS1 0x0 +#define LSDEV 0x20 /* Low-speed indicator */ +#define nLSDEV 0x0 +#define FSDEV 0x40 /* Full or High-speed indicator */ +#define nFSDEV 0x0 +#define B_DEVICE 0x80 /* A' or 'B' device indicator */ +#define nB_DEVICE 0x0 + +/* Bit masks for USB_OTG_VBUS_IRQ */ + +#define DRIVE_VBUS_ON 0x1 /* indicator to drive VBUS control circuit */ +#define nDRIVE_VBUS_ON 0x0 +#define DRIVE_VBUS_OFF 0x2 /* indicator to shut off charge pump */ +#define nDRIVE_VBUS_OFF 0x0 +#define CHRG_VBUS_START 0x4 /* indicator for external circuit to start charging VBUS */ +#define nCHRG_VBUS_START 0x0 +#define CHRG_VBUS_END 0x8 /* indicator for external circuit to end charging VBUS */ +#define nCHRG_VBUS_END 0x0 +#define DISCHRG_VBUS_START 0x10 /* indicator to start discharging VBUS */ +#define nDISCHRG_VBUS_START 0x0 +#define DISCHRG_VBUS_END 0x20 /* indicator to stop discharging VBUS */ +#define nDISCHRG_VBUS_END 0x0 + +/* Bit masks for USB_OTG_VBUS_MASK */ + +#define DRIVE_VBUS_ON_ENA 0x1 /* enable DRIVE_VBUS_ON interrupt */ +#define nDRIVE_VBUS_ON_ENA 0x0 +#define DRIVE_VBUS_OFF_ENA 0x2 /* enable DRIVE_VBUS_OFF interrupt */ +#define nDRIVE_VBUS_OFF_ENA 0x0 +#define CHRG_VBUS_START_ENA 0x4 /* enable CHRG_VBUS_START interrupt */ +#define nCHRG_VBUS_START_ENA 0x0 +#define CHRG_VBUS_END_ENA 0x8 /* enable CHRG_VBUS_END interrupt */ +#define nCHRG_VBUS_END_ENA 0x0 +#define DISCHRG_VBUS_START_ENA 0x10 /* enable DISCHRG_VBUS_START interrupt */ +#define nDISCHRG_VBUS_START_ENA 0x0 +#define DISCHRG_VBUS_END_ENA 0x20 /* enable DISCHRG_VBUS_END interrupt */ +#define nDISCHRG_VBUS_END_ENA 0x0 + +/* Bit masks for USB_CSR0 */ + +#define RXPKTRDY 0x1 /* data packet receive indicator */ +#define nRXPKTRDY 0x0 +#define TXPKTRDY 0x2 /* data packet in FIFO indicator */ +#define nTXPKTRDY 0x0 +#define STALL_SENT 0x4 /* STALL handshake sent */ +#define nSTALL_SENT 0x0 +#define DATAEND 0x8 /* Data end indicator */ +#define nDATAEND 0x0 +#define SETUPEND 0x10 /* Setup end */ +#define nSETUPEND 0x0 +#define SENDSTALL 0x20 /* Send STALL handshake */ +#define nSENDSTALL 0x0 +#define SERVICED_RXPKTRDY 0x40 /* used to clear the RxPktRdy bit */ +#define nSERVICED_RXPKTRDY 0x0 +#define SERVICED_SETUPEND 0x80 /* used to clear the SetupEnd bit */ +#define nSERVICED_SETUPEND 0x0 +#define FLUSHFIFO 0x100 /* flush endpoint FIFO */ +#define nFLUSHFIFO 0x0 +#define STALL_RECEIVED_H 0x4 /* STALL handshake received host mode */ +#define nSTALL_RECEIVED_H 0x0 +#define SETUPPKT_H 0x8 /* send Setup token host mode */ +#define nSETUPPKT_H 0x0 +#define ERROR_H 0x10 /* timeout error indicator host mode */ +#define nERROR_H 0x0 +#define REQPKT_H 0x20 /* Request an IN transaction host mode */ +#define nREQPKT_H 0x0 +#define STATUSPKT_H 0x40 /* Status stage transaction host mode */ +#define nSTATUSPKT_H 0x0 +#define NAK_TIMEOUT_H 0x80 /* EP0 halted after a NAK host mode */ +#define nNAK_TIMEOUT_H 0x0 + +/* Bit masks for USB_COUNT0 */ + +#define EP0_RX_COUNT 0x7f /* number of received bytes in EP0 FIFO */ + +/* Bit masks for USB_NAKLIMIT0 */ + +#define EP0_NAK_LIMIT 0x1f /* number of frames/micro frames after which EP0 timeouts */ + +/* Bit masks for USB_TX_MAX_PACKET */ + +#define MAX_PACKET_SIZE_T 0x7ff /* maximum data pay load in a frame */ + +/* Bit masks for USB_RX_MAX_PACKET */ + +#define MAX_PACKET_SIZE_R 0x7ff /* maximum data pay load in a frame */ + +/* Bit masks for USB_TXCSR */ + +#define TXPKTRDY_T 0x1 /* data packet in FIFO indicator */ +#define nTXPKTRDY_T 0x0 +#define FIFO_NOT_EMPTY_T 0x2 /* FIFO not empty */ +#define nFIFO_NOT_EMPTY_T 0x0 +#define UNDERRUN_T 0x4 /* TxPktRdy not set for an IN token */ +#define nUNDERRUN_T 0x0 +#define FLUSHFIFO_T 0x8 /* flush endpoint FIFO */ +#define nFLUSHFIFO_T 0x0 +#define STALL_SEND_T 0x10 /* issue a Stall handshake */ +#define nSTALL_SEND_T 0x0 +#define STALL_SENT_T 0x20 /* Stall handshake transmitted */ +#define nSTALL_SENT_T 0x0 +#define CLEAR_DATATOGGLE_T 0x40 /* clear endpoint data toggle */ +#define nCLEAR_DATATOGGLE_T 0x0 +#define INCOMPTX_T 0x80 /* indicates that a large packet is split */ +#define nINCOMPTX_T 0x0 +#define DMAREQMODE_T 0x400 /* DMA mode (0 or 1) selection */ +#define nDMAREQMODE_T 0x0 +#define FORCE_DATATOGGLE_T 0x800 /* Force data toggle */ +#define nFORCE_DATATOGGLE_T 0x0 +#define DMAREQ_ENA_T 0x1000 /* Enable DMA request for Tx EP */ +#define nDMAREQ_ENA_T 0x0 +#define ISO_T 0x4000 /* enable Isochronous transfers */ +#define nISO_T 0x0 +#define AUTOSET_T 0x8000 /* allows TxPktRdy to be set automatically */ +#define nAUTOSET_T 0x0 +#define ERROR_TH 0x4 /* error condition host mode */ +#define nERROR_TH 0x0 +#define STALL_RECEIVED_TH 0x20 /* Stall handshake received host mode */ +#define nSTALL_RECEIVED_TH 0x0 +#define NAK_TIMEOUT_TH 0x80 /* NAK timeout host mode */ +#define nNAK_TIMEOUT_TH 0x0 + +/* Bit masks for USB_TXCOUNT */ + +#define TX_COUNT 0x1fff /* Number of bytes to be written to the selected endpoint Tx FIFO */ + +/* Bit masks for USB_RXCSR */ + +#define RXPKTRDY_R 0x1 /* data packet in FIFO indicator */ +#define nRXPKTRDY_R 0x0 +#define FIFO_FULL_R 0x2 /* FIFO not empty */ +#define nFIFO_FULL_R 0x0 +#define OVERRUN_R 0x4 /* TxPktRdy not set for an IN token */ +#define nOVERRUN_R 0x0 +#define DATAERROR_R 0x8 /* Out packet cannot be loaded into Rx FIFO */ +#define nDATAERROR_R 0x0 +#define FLUSHFIFO_R 0x10 /* flush endpoint FIFO */ +#define nFLUSHFIFO_R 0x0 +#define STALL_SEND_R 0x20 /* issue a Stall handshake */ +#define nSTALL_SEND_R 0x0 +#define STALL_SENT_R 0x40 /* Stall handshake transmitted */ +#define nSTALL_SENT_R 0x0 +#define CLEAR_DATATOGGLE_R 0x80 /* clear endpoint data toggle */ +#define nCLEAR_DATATOGGLE_R 0x0 +#define INCOMPRX_R 0x100 /* indicates that a large packet is split */ +#define nINCOMPRX_R 0x0 +#define DMAREQMODE_R 0x800 /* DMA mode (0 or 1) selection */ +#define nDMAREQMODE_R 0x0 +#define DISNYET_R 0x1000 /* disable Nyet handshakes */ +#define nDISNYET_R 0x0 +#define DMAREQ_ENA_R 0x2000 /* Enable DMA request for Tx EP */ +#define nDMAREQ_ENA_R 0x0 +#define ISO_R 0x4000 /* enable Isochronous transfers */ +#define nISO_R 0x0 +#define AUTOCLEAR_R 0x8000 /* allows TxPktRdy to be set automatically */ +#define nAUTOCLEAR_R 0x0 +#define ERROR_RH 0x4 /* TxPktRdy not set for an IN token host mode */ +#define nERROR_RH 0x0 +#define REQPKT_RH 0x20 /* request an IN transaction host mode */ +#define nREQPKT_RH 0x0 +#define STALL_RECEIVED_RH 0x40 /* Stall handshake received host mode */ +#define nSTALL_RECEIVED_RH 0x0 +#define INCOMPRX_RH 0x100 /* indicates that a large packet is split host mode */ +#define nINCOMPRX_RH 0x0 +#define DMAREQMODE_RH 0x800 /* DMA mode (0 or 1) selection host mode */ +#define nDMAREQMODE_RH 0x0 +#define AUTOREQ_RH 0x4000 /* sets ReqPkt automatically host mode */ +#define nAUTOREQ_RH 0x0 + +/* Bit masks for USB_RXCOUNT */ + +#define RX_COUNT 0x1fff /* Number of received bytes in the packet in the Rx FIFO */ + +/* Bit masks for USB_TXTYPE */ + +#define TARGET_EP_NO_T 0xf /* EP number */ +#define PROTOCOL_T 0xc /* transfer type */ + +/* Bit masks for USB_TXINTERVAL */ + +#define TX_POLL_INTERVAL 0xff /* polling interval for selected Tx EP */ + +/* Bit masks for USB_RXTYPE */ + +#define TARGET_EP_NO_R 0xf /* EP number */ +#define PROTOCOL_R 0xc /* transfer type */ + +/* Bit masks for USB_RXINTERVAL */ + +#define RX_POLL_INTERVAL 0xff /* polling interval for selected Rx EP */ + +/* Bit masks for USB_DMA_INTERRUPT */ + +#define DMA0_INT 0x1 /* DMA0 pending interrupt */ +#define nDMA0_INT 0x0 +#define DMA1_INT 0x2 /* DMA1 pending interrupt */ +#define nDMA1_INT 0x0 +#define DMA2_INT 0x4 /* DMA2 pending interrupt */ +#define nDMA2_INT 0x0 +#define DMA3_INT 0x8 /* DMA3 pending interrupt */ +#define nDMA3_INT 0x0 +#define DMA4_INT 0x10 /* DMA4 pending interrupt */ +#define nDMA4_INT 0x0 +#define DMA5_INT 0x20 /* DMA5 pending interrupt */ +#define nDMA5_INT 0x0 +#define DMA6_INT 0x40 /* DMA6 pending interrupt */ +#define nDMA6_INT 0x0 +#define DMA7_INT 0x80 /* DMA7 pending interrupt */ +#define nDMA7_INT 0x0 + +/* Bit masks for USB_DMAxCONTROL */ + +#define DMA_ENA 0x1 /* DMA enable */ +#define nDMA_ENA 0x0 +#define DIRECTION 0x2 /* direction of DMA transfer */ +#define nDIRECTION 0x0 +#define MODE 0x4 /* DMA Bus error */ +#define nMODE 0x0 +#define INT_ENA 0x8 /* Interrupt enable */ +#define nINT_ENA 0x0 +#define EPNUM 0xf0 /* EP number */ +#define BUSERROR 0x100 /* DMA Bus error */ +#define nBUSERROR 0x0 + +/* Bit masks for USB_DMAxADDRHIGH */ + +#define DMA_ADDR_HIGH 0xffff /* Upper 16-bits of memory source/destination address for the DMA master channel */ + +/* Bit masks for USB_DMAxADDRLOW */ + +#define DMA_ADDR_LOW 0xffff /* Lower 16-bits of memory source/destination address for the DMA master channel */ + +/* Bit masks for USB_DMAxCOUNTHIGH */ + +#define DMA_COUNT_HIGH 0xffff /* Upper 16-bits of byte count of DMA transfer for DMA master channel */ + +/* Bit masks for USB_DMAxCOUNTLOW */ + +#define DMA_COUNT_LOW 0xffff /* Lower 16-bits of byte count of DMA transfer for DMA master channel */ + +#endif /* _DEF_BF525_H */ diff --git a/include/asm-blackfin/mach-bf527/defBF527.h b/include/asm-blackfin/mach-bf527/defBF527.h new file mode 100644 index 00000000000000..2be3293f9e26ee --- /dev/null +++ b/include/asm-blackfin/mach-bf527/defBF527.h @@ -0,0 +1,1089 @@ +/* + * File: include/asm-blackfin/mach-bf527/defBF527.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _DEF_BF527_H +#define _DEF_BF527_H + +/* Include all Core registers and bit definitions */ +#include <def_LPBlackfin.h> + +/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF527 */ + +/* Include defBF52x_base.h for the set of #defines that are common to all ADSP-BF52x processors */ +#include <defBF52x_base.h> + +/* The following are the #defines needed by ADSP-BF527 that are not in the common header */ +/* 10/100 Ethernet Controller (0xFFC03000 - 0xFFC031FF) */ + +#define EMAC_OPMODE 0xFFC03000 /* Operating Mode Register */ +#define EMAC_ADDRLO 0xFFC03004 /* Address Low (32 LSBs) Register */ +#define EMAC_ADDRHI 0xFFC03008 /* Address High (16 MSBs) Register */ +#define EMAC_HASHLO 0xFFC0300C /* Multicast Hash Table Low (Bins 31-0) Register */ +#define EMAC_HASHHI 0xFFC03010 /* Multicast Hash Table High (Bins 63-32) Register */ +#define EMAC_STAADD 0xFFC03014 /* Station Management Address Register */ +#define EMAC_STADAT 0xFFC03018 /* Station Management Data Register */ +#define EMAC_FLC 0xFFC0301C /* Flow Control Register */ +#define EMAC_VLAN1 0xFFC03020 /* VLAN1 Tag Register */ +#define EMAC_VLAN2 0xFFC03024 /* VLAN2 Tag Register */ +#define EMAC_WKUP_CTL 0xFFC0302C /* Wake-Up Control/Status Register */ +#define EMAC_WKUP_FFMSK0 0xFFC03030 /* Wake-Up Frame Filter 0 Byte Mask Register */ +#define EMAC_WKUP_FFMSK1 0xFFC03034 /* Wake-Up Frame Filter 1 Byte Mask Register */ +#define EMAC_WKUP_FFMSK2 0xFFC03038 /* Wake-Up Frame Filter 2 Byte Mask Register */ +#define EMAC_WKUP_FFMSK3 0xFFC0303C /* Wake-Up Frame Filter 3 Byte Mask Register */ +#define EMAC_WKUP_FFCMD 0xFFC03040 /* Wake-Up Frame Filter Commands Register */ +#define EMAC_WKUP_FFOFF 0xFFC03044 /* Wake-Up Frame Filter Offsets Register */ +#define EMAC_WKUP_FFCRC0 0xFFC03048 /* Wake-Up Frame Filter 0,1 CRC-16 Register */ +#define EMAC_WKUP_FFCRC1 0xFFC0304C /* Wake-Up Frame Filter 2,3 CRC-16 Register */ + +#define EMAC_SYSCTL 0xFFC03060 /* EMAC System Control Register */ +#define EMAC_SYSTAT 0xFFC03064 /* EMAC System Status Register */ +#define EMAC_RX_STAT 0xFFC03068 /* RX Current Frame Status Register */ +#define EMAC_RX_STKY 0xFFC0306C /* RX Sticky Frame Status Register */ +#define EMAC_RX_IRQE 0xFFC03070 /* RX Frame Status Interrupt Enables Register */ +#define EMAC_TX_STAT 0xFFC03074 /* TX Current Frame Status Register */ +#define EMAC_TX_STKY 0xFFC03078 /* TX Sticky Frame Status Register */ +#define EMAC_TX_IRQE 0xFFC0307C /* TX Frame Status Interrupt Enables Register */ + +#define EMAC_MMC_CTL 0xFFC03080 /* MMC Counter Control Register */ +#define EMAC_MMC_RIRQS 0xFFC03084 /* MMC RX Interrupt Status Register */ +#define EMAC_MMC_RIRQE 0xFFC03088 /* MMC RX Interrupt Enables Register */ +#define EMAC_MMC_TIRQS 0xFFC0308C /* MMC TX Interrupt Status Register */ +#define EMAC_MMC_TIRQE 0xFFC03090 /* MMC TX Interrupt Enables Register */ + +#define EMAC_RXC_OK 0xFFC03100 /* RX Frame Successful Count */ +#define EMAC_RXC_FCS 0xFFC03104 /* RX Frame FCS Failure Count */ +#define EMAC_RXC_ALIGN 0xFFC03108 /* RX Alignment Error Count */ +#define EMAC_RXC_OCTET 0xFFC0310C /* RX Octets Successfully Received Count */ +#define EMAC_RXC_DMAOVF 0xFFC03110 /* Internal MAC Sublayer Error RX Frame Count */ +#define EMAC_RXC_UNICST 0xFFC03114 /* Unicast RX Frame Count */ +#define EMAC_RXC_MULTI 0xFFC03118 /* Multicast RX Frame Count */ +#define EMAC_RXC_BROAD 0xFFC0311C /* Broadcast RX Frame Count */ +#define EMAC_RXC_LNERRI 0xFFC03120 /* RX Frame In Range Error Count */ +#define EMAC_RXC_LNERRO 0xFFC03124 /* RX Frame Out Of Range Error Count */ +#define EMAC_RXC_LONG 0xFFC03128 /* RX Frame Too Long Count */ +#define EMAC_RXC_MACCTL 0xFFC0312C /* MAC Control RX Frame Count */ +#define EMAC_RXC_OPCODE 0xFFC03130 /* Unsupported Op-Code RX Frame Count */ +#define EMAC_RXC_PAUSE 0xFFC03134 /* MAC Control Pause RX Frame Count */ +#define EMAC_RXC_ALLFRM 0xFFC03138 /* Overall RX Frame Count */ +#define EMAC_RXC_ALLOCT 0xFFC0313C /* Overall RX Octet Count */ +#define EMAC_RXC_TYPED 0xFFC03140 /* Type/Length Consistent RX Frame Count */ +#define EMAC_RXC_SHORT 0xFFC03144 /* RX Frame Fragment Count - Byte Count x < 64 */ +#define EMAC_RXC_EQ64 0xFFC03148 /* Good RX Frame Count - Byte Count x = 64 */ +#define EMAC_RXC_LT128 0xFFC0314C /* Good RX Frame Count - Byte Count 64 < x < 128 */ +#define EMAC_RXC_LT256 0xFFC03150 /* Good RX Frame Count - Byte Count 128 <= x < 256 */ +#define EMAC_RXC_LT512 0xFFC03154 /* Good RX Frame Count - Byte Count 256 <= x < 512 */ +#define EMAC_RXC_LT1024 0xFFC03158 /* Good RX Frame Count - Byte Count 512 <= x < 1024 */ +#define EMAC_RXC_GE1024 0xFFC0315C /* Good RX Frame Count - Byte Count x >= 1024 */ + +#define EMAC_TXC_OK 0xFFC03180 /* TX Frame Successful Count */ +#define EMAC_TXC_1COL 0xFFC03184 /* TX Frames Successful After Single Collision Count */ +#define EMAC_TXC_GT1COL 0xFFC03188 /* TX Frames Successful After Multiple Collisions Count */ +#define EMAC_TXC_OCTET 0xFFC0318C /* TX Octets Successfully Received Count */ +#define EMAC_TXC_DEFER 0xFFC03190 /* TX Frame Delayed Due To Busy Count */ +#define EMAC_TXC_LATECL 0xFFC03194 /* Late TX Collisions Count */ +#define EMAC_TXC_XS_COL 0xFFC03198 /* TX Frame Failed Due To Excessive Collisions Count */ +#define EMAC_TXC_DMAUND 0xFFC0319C /* Internal MAC Sublayer Error TX Frame Count */ +#define EMAC_TXC_CRSERR 0xFFC031A0 /* Carrier Sense Deasserted During TX Frame Count */ +#define EMAC_TXC_UNICST 0xFFC031A4 /* Unicast TX Frame Count */ +#define EMAC_TXC_MULTI 0xFFC031A8 /* Multicast TX Frame Count */ +#define EMAC_TXC_BROAD 0xFFC031AC /* Broadcast TX Frame Count */ +#define EMAC_TXC_XS_DFR 0xFFC031B0 /* TX Frames With Excessive Deferral Count */ +#define EMAC_TXC_MACCTL 0xFFC031B4 /* MAC Control TX Frame Count */ +#define EMAC_TXC_ALLFRM 0xFFC031B8 /* Overall TX Frame Count */ +#define EMAC_TXC_ALLOCT 0xFFC031BC /* Overall TX Octet Count */ +#define EMAC_TXC_EQ64 0xFFC031C0 /* Good TX Frame Count - Byte Count x = 64 */ +#define EMAC_TXC_LT128 0xFFC031C4 /* Good TX Frame Count - Byte Count 64 < x < 128 */ +#define EMAC_TXC_LT256 0xFFC031C8 /* Good TX Frame Count - Byte Count 128 <= x < 256 */ +#define EMAC_TXC_LT512 0xFFC031CC /* Good TX Frame Count - Byte Count 256 <= x < 512 */ +#define EMAC_TXC_LT1024 0xFFC031D0 /* Good TX Frame Count - Byte Count 512 <= x < 1024 */ +#define EMAC_TXC_GE1024 0xFFC031D4 /* Good TX Frame Count - Byte Count x >= 1024 */ +#define EMAC_TXC_ABORT 0xFFC031D8 /* Total TX Frames Aborted Count */ + +/* Listing for IEEE-Supported Count Registers */ + +#define FramesReceivedOK EMAC_RXC_OK /* RX Frame Successful Count */ +#define FrameCheckSequenceErrors EMAC_RXC_FCS /* RX Frame FCS Failure Count */ +#define AlignmentErrors EMAC_RXC_ALIGN /* RX Alignment Error Count */ +#define OctetsReceivedOK EMAC_RXC_OCTET /* RX Octets Successfully Received Count */ +#define FramesLostDueToIntMACRcvError EMAC_RXC_DMAOVF /* Internal MAC Sublayer Error RX Frame Count */ +#define UnicastFramesReceivedOK EMAC_RXC_UNICST /* Unicast RX Frame Count */ +#define MulticastFramesReceivedOK EMAC_RXC_MULTI /* Multicast RX Frame Count */ +#define BroadcastFramesReceivedOK EMAC_RXC_BROAD /* Broadcast RX Frame Count */ +#define InRangeLengthErrors EMAC_RXC_LNERRI /* RX Frame In Range Error Count */ +#define OutOfRangeLengthField EMAC_RXC_LNERRO /* RX Frame Out Of Range Error Count */ +#define FrameTooLongErrors EMAC_RXC_LONG /* RX Frame Too Long Count */ +#define MACControlFramesReceived EMAC_RXC_MACCTL /* MAC Control RX Frame Count */ +#define UnsupportedOpcodesReceived EMAC_RXC_OPCODE /* Unsupported Op-Code RX Frame Count */ +#define PAUSEMACCtrlFramesReceived EMAC_RXC_PAUSE /* MAC Control Pause RX Frame Count */ +#define FramesReceivedAll EMAC_RXC_ALLFRM /* Overall RX Frame Count */ +#define OctetsReceivedAll EMAC_RXC_ALLOCT /* Overall RX Octet Count */ +#define TypedFramesReceived EMAC_RXC_TYPED /* Type/Length Consistent RX Frame Count */ +#define FramesLenLt64Received EMAC_RXC_SHORT /* RX Frame Fragment Count - Byte Count x < 64 */ +#define FramesLenEq64Received EMAC_RXC_EQ64 /* Good RX Frame Count - Byte Count x = 64 */ +#define FramesLen65_127Received EMAC_RXC_LT128 /* Good RX Frame Count - Byte Count 64 < x < 128 */ +#define FramesLen128_255Received EMAC_RXC_LT256 /* Good RX Frame Count - Byte Count 128 <= x < 256 */ +#define FramesLen256_511Received EMAC_RXC_LT512 /* Good RX Frame Count - Byte Count 256 <= x < 512 */ +#define FramesLen512_1023Received EMAC_RXC_LT1024 /* Good RX Frame Count - Byte Count 512 <= x < 1024 */ +#define FramesLen1024_MaxReceived EMAC_RXC_GE1024 /* Good RX Frame Count - Byte Count x >= 1024 */ + +#define FramesTransmittedOK EMAC_TXC_OK /* TX Frame Successful Count */ +#define SingleCollisionFrames EMAC_TXC_1COL /* TX Frames Successful After Single Collision Count */ +#define MultipleCollisionFrames EMAC_TXC_GT1COL /* TX Frames Successful After Multiple Collisions Count */ +#define OctetsTransmittedOK EMAC_TXC_OCTET /* TX Octets Successfully Received Count */ +#define FramesWithDeferredXmissions EMAC_TXC_DEFER /* TX Frame Delayed Due To Busy Count */ +#define LateCollisions EMAC_TXC_LATECL /* Late TX Collisions Count */ +#define FramesAbortedDueToXSColls EMAC_TXC_XS_COL /* TX Frame Failed Due To Excessive Collisions Count */ +#define FramesLostDueToIntMacXmitError EMAC_TXC_DMAUND /* Internal MAC Sublayer Error TX Frame Count */ +#define CarrierSenseErrors EMAC_TXC_CRSERR /* Carrier Sense Deasserted During TX Frame Count */ +#define UnicastFramesXmittedOK EMAC_TXC_UNICST /* Unicast TX Frame Count */ +#define MulticastFramesXmittedOK EMAC_TXC_MULTI /* Multicast TX Frame Count */ +#define BroadcastFramesXmittedOK EMAC_TXC_BROAD /* Broadcast TX Frame Count */ +#define FramesWithExcessiveDeferral EMAC_TXC_XS_DFR /* TX Frames With Excessive Deferral Count */ +#define MACControlFramesTransmitted EMAC_TXC_MACCTL /* MAC Control TX Frame Count */ +#define FramesTransmittedAll EMAC_TXC_ALLFRM /* Overall TX Frame Count */ +#define OctetsTransmittedAll EMAC_TXC_ALLOCT /* Overall TX Octet Count */ +#define FramesLenEq64Transmitted EMAC_TXC_EQ64 /* Good TX Frame Count - Byte Count x = 64 */ +#define FramesLen65_127Transmitted EMAC_TXC_LT128 /* Good TX Frame Count - Byte Count 64 < x < 128 */ +#define FramesLen128_255Transmitted EMAC_TXC_LT256 /* Good TX Frame Count - Byte Count 128 <= x < 256 */ +#define FramesLen256_511Transmitted EMAC_TXC_LT512 /* Good TX Frame Count - Byte Count 256 <= x < 512 */ +#define FramesLen512_1023Transmitted EMAC_TXC_LT1024 /* Good TX Frame Count - Byte Count 512 <= x < 1024 */ +#define FramesLen1024_MaxTransmitted EMAC_TXC_GE1024 /* Good TX Frame Count - Byte Count x >= 1024 */ +#define TxAbortedFrames EMAC_TXC_ABORT /* Total TX Frames Aborted Count */ + +/*********************************************************************************** +** System MMR Register Bits And Macros +** +** Disclaimer: All macros are intended to make C and Assembly code more readable. +** Use these macros carefully, as any that do left shifts for field +** depositing will result in the lower order bits being destroyed. Any +** macro that shifts left to properly position the bit-field should be +** used as part of an OR to initialize a register and NOT as a dynamic +** modifier UNLESS the lower order bits are saved and ORed back in when +** the macro is used. +*************************************************************************************/ + +/************************ ETHERNET 10/100 CONTROLLER MASKS ************************/ + +/* EMAC_OPMODE Masks */ + +#define RE 0x00000001 /* Receiver Enable */ +#define ASTP 0x00000002 /* Enable Automatic Pad Stripping On RX Frames */ +#define HU 0x00000010 /* Hash Filter Unicast Address */ +#define HM 0x00000020 /* Hash Filter Multicast Address */ +#define PAM 0x00000040 /* Pass-All-Multicast Mode Enable */ +#define PR 0x00000080 /* Promiscuous Mode Enable */ +#define IFE 0x00000100 /* Inverse Filtering Enable */ +#define DBF 0x00000200 /* Disable Broadcast Frame Reception */ +#define PBF 0x00000400 /* Pass Bad Frames Enable */ +#define PSF 0x00000800 /* Pass Short Frames Enable */ +#define RAF 0x00001000 /* Receive-All Mode */ +#define TE 0x00010000 /* Transmitter Enable */ +#define DTXPAD 0x00020000 /* Disable Automatic TX Padding */ +#define DTXCRC 0x00040000 /* Disable Automatic TX CRC Generation */ +#define DC 0x00080000 /* Deferral Check */ +#define BOLMT 0x00300000 /* Back-Off Limit */ +#define BOLMT_10 0x00000000 /* 10-bit range */ +#define BOLMT_8 0x00100000 /* 8-bit range */ +#define BOLMT_4 0x00200000 /* 4-bit range */ +#define BOLMT_1 0x00300000 /* 1-bit range */ +#define DRTY 0x00400000 /* Disable TX Retry On Collision */ +#define LCTRE 0x00800000 /* Enable TX Retry On Late Collision */ +#define RMII 0x01000000 /* RMII/MII* Mode */ +#define RMII_10 0x02000000 /* Speed Select for RMII Port (10MBit/100MBit*) */ +#define FDMODE 0x04000000 /* Duplex Mode Enable (Full/Half*) */ +#define LB 0x08000000 /* Internal Loopback Enable */ +#define DRO 0x10000000 /* Disable Receive Own Frames (Half-Duplex Mode) */ + +/* EMAC_STAADD Masks */ + +#define STABUSY 0x00000001 /* Initiate Station Mgt Reg Access / STA Busy Stat */ +#define STAOP 0x00000002 /* Station Management Operation Code (Write/Read*) */ +#define STADISPRE 0x00000004 /* Disable Preamble Generation */ +#define STAIE 0x00000008 /* Station Mgt. Transfer Done Interrupt Enable */ +#define REGAD 0x000007C0 /* STA Register Address */ +#define PHYAD 0x0000F800 /* PHY Device Address */ + +#define SET_REGAD(x) (((x)&0x1F)<< 6 ) /* Set STA Register Address */ +#define SET_PHYAD(x) (((x)&0x1F)<< 11 ) /* Set PHY Device Address */ + +/* EMAC_STADAT Mask */ + +#define STADATA 0x0000FFFF /* Station Management Data */ + +/* EMAC_FLC Masks */ + +#define FLCBUSY 0x00000001 /* Send Flow Ctrl Frame / Flow Ctrl Busy Status */ +#define FLCE 0x00000002 /* Flow Control Enable */ +#define PCF 0x00000004 /* Pass Control Frames */ +#define BKPRSEN 0x00000008 /* Enable Backpressure */ +#define FLCPAUSE 0xFFFF0000 /* Pause Time */ + +#define SET_FLCPAUSE(x) (((x)&0xFFFF)<< 16) /* Set Pause Time */ + +/* EMAC_WKUP_CTL Masks */ + +#define CAPWKFRM 0x00000001 /* Capture Wake-Up Frames */ +#define MPKE 0x00000002 /* Magic Packet Enable */ +#define RWKE 0x00000004 /* Remote Wake-Up Frame Enable */ +#define GUWKE 0x00000008 /* Global Unicast Wake Enable */ +#define MPKS 0x00000020 /* Magic Packet Received Status */ +#define RWKS 0x00000F00 /* Wake-Up Frame Received Status, Filters 3:0 */ + +/* EMAC_WKUP_FFCMD Masks */ + +#define WF0_E 0x00000001 /* Enable Wake-Up Filter 0 */ +#define WF0_T 0x00000008 /* Wake-Up Filter 0 Addr Type (Multicast/Unicast*) */ +#define WF1_E 0x00000100 /* Enable Wake-Up Filter 1 */ +#define WF1_T 0x00000800 /* Wake-Up Filter 1 Addr Type (Multicast/Unicast*) */ +#define WF2_E 0x00010000 /* Enable Wake-Up Filter 2 */ +#define WF2_T 0x00080000 /* Wake-Up Filter 2 Addr Type (Multicast/Unicast*) */ +#define WF3_E 0x01000000 /* Enable Wake-Up Filter 3 */ +#define WF3_T 0x08000000 /* Wake-Up Filter 3 Addr Type (Multicast/Unicast*) */ + +/* EMAC_WKUP_FFOFF Masks */ + +#define WF0_OFF 0x000000FF /* Wake-Up Filter 0 Pattern Offset */ +#define WF1_OFF 0x0000FF00 /* Wake-Up Filter 1 Pattern Offset */ +#define WF2_OFF 0x00FF0000 /* Wake-Up Filter 2 Pattern Offset */ +#define WF3_OFF 0xFF000000 /* Wake-Up Filter 3 Pattern Offset */ + +#define SET_WF0_OFF(x) (((x)&0xFF)<< 0 ) /* Set Wake-Up Filter 0 Byte Offset */ +#define SET_WF1_OFF(x) (((x)&0xFF)<< 8 ) /* Set Wake-Up Filter 1 Byte Offset */ +#define SET_WF2_OFF(x) (((x)&0xFF)<< 16 ) /* Set Wake-Up Filter 2 Byte Offset */ +#define SET_WF3_OFF(x) (((x)&0xFF)<< 24 ) /* Set Wake-Up Filter 3 Byte Offset */ +/* Set ALL Offsets */ +#define SET_WF_OFFS(x0,x1,x2,x3) (SET_WF0_OFF((x0))|SET_WF1_OFF((x1))|SET_WF2_OFF((x2))|SET_WF3_OFF((x3))) + +/* EMAC_WKUP_FFCRC0 Masks */ + +#define WF0_CRC 0x0000FFFF /* Wake-Up Filter 0 Pattern CRC */ +#define WF1_CRC 0xFFFF0000 /* Wake-Up Filter 1 Pattern CRC */ + +#define SET_WF0_CRC(x) (((x)&0xFFFF)<< 0 ) /* Set Wake-Up Filter 0 Target CRC */ +#define SET_WF1_CRC(x) (((x)&0xFFFF)<< 16 ) /* Set Wake-Up Filter 1 Target CRC */ + +/* EMAC_WKUP_FFCRC1 Masks */ + +#define WF2_CRC 0x0000FFFF /* Wake-Up Filter 2 Pattern CRC */ +#define WF3_CRC 0xFFFF0000 /* Wake-Up Filter 3 Pattern CRC */ + +#define SET_WF2_CRC(x) (((x)&0xFFFF)<< 0 ) /* Set Wake-Up Filter 2 Target CRC */ +#define SET_WF3_CRC(x) (((x)&0xFFFF)<< 16 ) /* Set Wake-Up Filter 3 Target CRC */ + +/* EMAC_SYSCTL Masks */ + +#define PHYIE 0x00000001 /* PHY_INT Interrupt Enable */ +#define RXDWA 0x00000002 /* Receive Frame DMA Word Alignment (Odd/Even*) */ +#define RXCKS 0x00000004 /* Enable RX Frame TCP/UDP Checksum Computation */ +#define MDCDIV 0x00003F00 /* SCLK:MDC Clock Divisor [MDC=SCLK/(2*(N+1))] */ + +#define SET_MDCDIV(x) (((x)&0x3F)<< 8) /* Set MDC Clock Divisor */ + +/* EMAC_SYSTAT Masks */ + +#define PHYINT 0x00000001 /* PHY_INT Interrupt Status */ +#define MMCINT 0x00000002 /* MMC Counter Interrupt Status */ +#define RXFSINT 0x00000004 /* RX Frame-Status Interrupt Status */ +#define TXFSINT 0x00000008 /* TX Frame-Status Interrupt Status */ +#define WAKEDET 0x00000010 /* Wake-Up Detected Status */ +#define RXDMAERR 0x00000020 /* RX DMA Direction Error Status */ +#define TXDMAERR 0x00000040 /* TX DMA Direction Error Status */ +#define STMDONE 0x00000080 /* Station Mgt. Transfer Done Interrupt Status */ + +/* EMAC_RX_STAT, EMAC_RX_STKY, and EMAC_RX_IRQE Masks */ + +#define RX_FRLEN 0x000007FF /* Frame Length In Bytes */ +#define RX_COMP 0x00001000 /* RX Frame Complete */ +#define RX_OK 0x00002000 /* RX Frame Received With No Errors */ +#define RX_LONG 0x00004000 /* RX Frame Too Long Error */ +#define RX_ALIGN 0x00008000 /* RX Frame Alignment Error */ +#define RX_CRC 0x00010000 /* RX Frame CRC Error */ +#define RX_LEN 0x00020000 /* RX Frame Length Error */ +#define RX_FRAG 0x00040000 /* RX Frame Fragment Error */ +#define RX_ADDR 0x00080000 /* RX Frame Address Filter Failed Error */ +#define RX_DMAO 0x00100000 /* RX Frame DMA Overrun Error */ +#define RX_PHY 0x00200000 /* RX Frame PHY Error */ +#define RX_LATE 0x00400000 /* RX Frame Late Collision Error */ +#define RX_RANGE 0x00800000 /* RX Frame Length Field Out of Range Error */ +#define RX_MULTI 0x01000000 /* RX Multicast Frame Indicator */ +#define RX_BROAD 0x02000000 /* RX Broadcast Frame Indicator */ +#define RX_CTL 0x04000000 /* RX Control Frame Indicator */ +#define RX_UCTL 0x08000000 /* Unsupported RX Control Frame Indicator */ +#define RX_TYPE 0x10000000 /* RX Typed Frame Indicator */ +#define RX_VLAN1 0x20000000 /* RX VLAN1 Frame Indicator */ +#define RX_VLAN2 0x40000000 /* RX VLAN2 Frame Indicator */ +#define RX_ACCEPT 0x80000000 /* RX Frame Accepted Indicator */ + +/* EMAC_TX_STAT, EMAC_TX_STKY, and EMAC_TX_IRQE Masks */ + +#define TX_COMP 0x00000001 /* TX Frame Complete */ +#define TX_OK 0x00000002 /* TX Frame Sent With No Errors */ +#define TX_ECOLL 0x00000004 /* TX Frame Excessive Collision Error */ +#define TX_LATE 0x00000008 /* TX Frame Late Collision Error */ +#define TX_DMAU 0x00000010 /* TX Frame DMA Underrun Error (STAT) */ +#define TX_MACE 0x00000010 /* Internal MAC Error Detected (STKY and IRQE) */ +#define TX_EDEFER 0x00000020 /* TX Frame Excessive Deferral Error */ +#define TX_BROAD 0x00000040 /* TX Broadcast Frame Indicator */ +#define TX_MULTI 0x00000080 /* TX Multicast Frame Indicator */ +#define TX_CCNT 0x00000F00 /* TX Frame Collision Count */ +#define TX_DEFER 0x00001000 /* TX Frame Deferred Indicator */ +#define TX_CRS 0x00002000 /* TX Frame Carrier Sense Not Asserted Error */ +#define TX_LOSS 0x00004000 /* TX Frame Carrier Lost During TX Error */ +#define TX_RETRY 0x00008000 /* TX Frame Successful After Retry */ +#define TX_FRLEN 0x07FF0000 /* TX Frame Length (Bytes) */ + +/* EMAC_MMC_CTL Masks */ +#define RSTC 0x00000001 /* Reset All Counters */ +#define CROLL 0x00000002 /* Counter Roll-Over Enable */ +#define CCOR 0x00000004 /* Counter Clear-On-Read Mode Enable */ +#define MMCE 0x00000008 /* Enable MMC Counter Operation */ + +/* EMAC_MMC_RIRQS and EMAC_MMC_RIRQE Masks */ +#define RX_OK_CNT 0x00000001 /* RX Frames Received With No Errors */ +#define RX_FCS_CNT 0x00000002 /* RX Frames W/Frame Check Sequence Errors */ +#define RX_ALIGN_CNT 0x00000004 /* RX Frames With Alignment Errors */ +#define RX_OCTET_CNT 0x00000008 /* RX Octets Received OK */ +#define RX_LOST_CNT 0x00000010 /* RX Frames Lost Due To Internal MAC RX Error */ +#define RX_UNI_CNT 0x00000020 /* Unicast RX Frames Received OK */ +#define RX_MULTI_CNT 0x00000040 /* Multicast RX Frames Received OK */ +#define RX_BROAD_CNT 0x00000080 /* Broadcast RX Frames Received OK */ +#define RX_IRL_CNT 0x00000100 /* RX Frames With In-Range Length Errors */ +#define RX_ORL_CNT 0x00000200 /* RX Frames With Out-Of-Range Length Errors */ +#define RX_LONG_CNT 0x00000400 /* RX Frames With Frame Too Long Errors */ +#define RX_MACCTL_CNT 0x00000800 /* MAC Control RX Frames Received */ +#define RX_OPCODE_CTL 0x00001000 /* Unsupported Op-Code RX Frames Received */ +#define RX_PAUSE_CNT 0x00002000 /* PAUSEMAC Control RX Frames Received */ +#define RX_ALLF_CNT 0x00004000 /* All RX Frames Received */ +#define RX_ALLO_CNT 0x00008000 /* All RX Octets Received */ +#define RX_TYPED_CNT 0x00010000 /* Typed RX Frames Received */ +#define RX_SHORT_CNT 0x00020000 /* RX Frame Fragments (< 64 Bytes) Received */ +#define RX_EQ64_CNT 0x00040000 /* 64-Byte RX Frames Received */ +#define RX_LT128_CNT 0x00080000 /* 65-127-Byte RX Frames Received */ +#define RX_LT256_CNT 0x00100000 /* 128-255-Byte RX Frames Received */ +#define RX_LT512_CNT 0x00200000 /* 256-511-Byte RX Frames Received */ +#define RX_LT1024_CNT 0x00400000 /* 512-1023-Byte RX Frames Received */ +#define RX_GE1024_CNT 0x00800000 /* 1024-Max-Byte RX Frames Received */ + +/* EMAC_MMC_TIRQS and EMAC_MMC_TIRQE Masks */ + +#define TX_OK_CNT 0x00000001 /* TX Frames Sent OK */ +#define TX_SCOLL_CNT 0x00000002 /* TX Frames With Single Collisions */ +#define TX_MCOLL_CNT 0x00000004 /* TX Frames With Multiple Collisions */ +#define TX_OCTET_CNT 0x00000008 /* TX Octets Sent OK */ +#define TX_DEFER_CNT 0x00000010 /* TX Frames With Deferred Transmission */ +#define TX_LATE_CNT 0x00000020 /* TX Frames With Late Collisions */ +#define TX_ABORTC_CNT 0x00000040 /* TX Frames Aborted Due To Excess Collisions */ +#define TX_LOST_CNT 0x00000080 /* TX Frames Lost Due To Internal MAC TX Error */ +#define TX_CRS_CNT 0x00000100 /* TX Frames With Carrier Sense Errors */ +#define TX_UNI_CNT 0x00000200 /* Unicast TX Frames Sent */ +#define TX_MULTI_CNT 0x00000400 /* Multicast TX Frames Sent */ +#define TX_BROAD_CNT 0x00000800 /* Broadcast TX Frames Sent */ +#define TX_EXDEF_CTL 0x00001000 /* TX Frames With Excessive Deferral */ +#define TX_MACCTL_CNT 0x00002000 /* MAC Control TX Frames Sent */ +#define TX_ALLF_CNT 0x00004000 /* All TX Frames Sent */ +#define TX_ALLO_CNT 0x00008000 /* All TX Octets Sent */ +#define TX_EQ64_CNT 0x00010000 /* 64-Byte TX Frames Sent */ +#define TX_LT128_CNT 0x00020000 /* 65-127-Byte TX Frames Sent */ +#define TX_LT256_CNT 0x00040000 /* 128-255-Byte TX Frames Sent */ +#define TX_LT512_CNT 0x00080000 /* 256-511-Byte TX Frames Sent */ +#define TX_LT1024_CNT 0x00100000 /* 512-1023-Byte TX Frames Sent */ +#define TX_GE1024_CNT 0x00200000 /* 1024-Max-Byte TX Frames Sent */ +#define TX_ABORT_CNT 0x00400000 /* TX Frames Aborted */ + +/* USB Control Registers */ + +#define USB_FADDR 0xffc03800 /* Function address register */ +#define USB_POWER 0xffc03804 /* Power management register */ +#define USB_INTRTX 0xffc03808 /* Interrupt register for endpoint 0 and Tx endpoint 1 to 7 */ +#define USB_INTRRX 0xffc0380c /* Interrupt register for Rx endpoints 1 to 7 */ +#define USB_INTRTXE 0xffc03810 /* Interrupt enable register for IntrTx */ +#define USB_INTRRXE 0xffc03814 /* Interrupt enable register for IntrRx */ +#define USB_INTRUSB 0xffc03818 /* Interrupt register for common USB interrupts */ +#define USB_INTRUSBE 0xffc0381c /* Interrupt enable register for IntrUSB */ +#define USB_FRAME 0xffc03820 /* USB frame number */ +#define USB_INDEX 0xffc03824 /* Index register for selecting the indexed endpoint registers */ +#define USB_TESTMODE 0xffc03828 /* Enabled USB 20 test modes */ +#define USB_GLOBINTR 0xffc0382c /* Global Interrupt Mask register and Wakeup Exception Interrupt */ +#define USB_GLOBAL_CTL 0xffc03830 /* Global Clock Control for the core */ + +/* USB Packet Control Registers */ + +#define USB_TX_MAX_PACKET 0xffc03840 /* Maximum packet size for Host Tx endpoint */ +#define USB_CSR0 0xffc03844 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */ +#define USB_TXCSR 0xffc03844 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */ +#define USB_RX_MAX_PACKET 0xffc03848 /* Maximum packet size for Host Rx endpoint */ +#define USB_RXCSR 0xffc0384c /* Control Status register for Host Rx endpoint */ +#define USB_COUNT0 0xffc03850 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */ +#define USB_RXCOUNT 0xffc03850 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */ +#define USB_TXTYPE 0xffc03854 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint */ +#define USB_NAKLIMIT0 0xffc03858 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */ +#define USB_TXINTERVAL 0xffc03858 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */ +#define USB_RXTYPE 0xffc0385c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint */ +#define USB_RXINTERVAL 0xffc03860 /* Sets the polling interval for Interrupt and Isochronous transfers or the NAK response timeout on Bulk transfers */ +#define USB_TXCOUNT 0xffc03868 /* Number of bytes to be written to the selected endpoint Tx FIFO */ + +/* USB Endpoint FIFO Registers */ + +#define USB_EP0_FIFO 0xffc03880 /* Endpoint 0 FIFO */ +#define USB_EP1_FIFO 0xffc03888 /* Endpoint 1 FIFO */ +#define USB_EP2_FIFO 0xffc03890 /* Endpoint 2 FIFO */ +#define USB_EP3_FIFO 0xffc03898 /* Endpoint 3 FIFO */ +#define USB_EP4_FIFO 0xffc038a0 /* Endpoint 4 FIFO */ +#define USB_EP5_FIFO 0xffc038a8 /* Endpoint 5 FIFO */ +#define USB_EP6_FIFO 0xffc038b0 /* Endpoint 6 FIFO */ +#define USB_EP7_FIFO 0xffc038b8 /* Endpoint 7 FIFO */ + +/* USB OTG Control Registers */ + +#define USB_OTG_DEV_CTL 0xffc03900 /* OTG Device Control Register */ +#define USB_OTG_VBUS_IRQ 0xffc03904 /* OTG VBUS Control Interrupts */ +#define USB_OTG_VBUS_MASK 0xffc03908 /* VBUS Control Interrupt Enable */ + +/* USB Phy Control Registers */ + +#define USB_LINKINFO 0xffc03948 /* Enables programming of some PHY-side delays */ +#define USB_VPLEN 0xffc0394c /* Determines duration of VBUS pulse for VBUS charging */ +#define USB_HS_EOF1 0xffc03950 /* Time buffer for High-Speed transactions */ +#define USB_FS_EOF1 0xffc03954 /* Time buffer for Full-Speed transactions */ +#define USB_LS_EOF1 0xffc03958 /* Time buffer for Low-Speed transactions */ + +/* (APHY_CNTRL is for ADI usage only) */ + +#define USB_APHY_CNTRL 0xffc039e0 /* Register that increases visibility of Analog PHY */ + +/* (APHY_CALIB is for ADI usage only) */ + +#define USB_APHY_CALIB 0xffc039e4 /* Register used to set some calibration values */ + +#define USB_APHY_CNTRL2 0xffc039e8 /* Register used to prevent re-enumeration once Moab goes into hibernate mode */ + +/* (PHY_TEST is for ADI usage only) */ + +#define USB_PHY_TEST 0xffc039ec /* Used for reducing simulation time and simplifies FIFO testability */ + +#define USB_PLLOSC_CTRL 0xffc039f0 /* Used to program different parameters for USB PLL and Oscillator */ +#define USB_SRP_CLKDIV 0xffc039f4 /* Used to program clock divide value for the clock fed to the SRP detection logic */ + +/* USB Endpoint 0 Control Registers */ + +#define USB_EP_NI0_TXMAXP 0xffc03a00 /* Maximum packet size for Host Tx endpoint0 */ +#define USB_EP_NI0_TXCSR 0xffc03a04 /* Control Status register for endpoint 0 */ +#define USB_EP_NI0_RXMAXP 0xffc03a08 /* Maximum packet size for Host Rx endpoint0 */ +#define USB_EP_NI0_RXCSR 0xffc03a0c /* Control Status register for Host Rx endpoint0 */ +#define USB_EP_NI0_RXCOUNT 0xffc03a10 /* Number of bytes received in endpoint 0 FIFO */ +#define USB_EP_NI0_TXTYPE 0xffc03a14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint0 */ +#define USB_EP_NI0_TXINTERVAL 0xffc03a18 /* Sets the NAK response timeout on Endpoint 0 */ +#define USB_EP_NI0_RXTYPE 0xffc03a1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint0 */ +#define USB_EP_NI0_RXINTERVAL 0xffc03a20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint0 */ +#define USB_EP_NI0_TXCOUNT 0xffc03a28 /* Number of bytes to be written to the endpoint0 Tx FIFO */ + +/* USB Endpoint 1 Control Registers */ + +#define USB_EP_NI1_TXMAXP 0xffc03a40 /* Maximum packet size for Host Tx endpoint1 */ +#define USB_EP_NI1_TXCSR 0xffc03a44 /* Control Status register for endpoint1 */ +#define USB_EP_NI1_RXMAXP 0xffc03a48 /* Maximum packet size for Host Rx endpoint1 */ +#define USB_EP_NI1_RXCSR 0xffc03a4c /* Control Status register for Host Rx endpoint1 */ +#define USB_EP_NI1_RXCOUNT 0xffc03a50 /* Number of bytes received in endpoint1 FIFO */ +#define USB_EP_NI1_TXTYPE 0xffc03a54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint1 */ +#define USB_EP_NI1_TXINTERVAL 0xffc03a58 /* Sets the NAK response timeout on Endpoint1 */ +#define USB_EP_NI1_RXTYPE 0xffc03a5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint1 */ +#define USB_EP_NI1_RXINTERVAL 0xffc03a60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint1 */ +#define USB_EP_NI1_TXCOUNT 0xffc03a68 /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */ + +/* USB Endpoint 2 Control Registers */ + +#define USB_EP_NI2_TXMAXP 0xffc03a80 /* Maximum packet size for Host Tx endpoint2 */ +#define USB_EP_NI2_TXCSR 0xffc03a84 /* Control Status register for endpoint2 */ +#define USB_EP_NI2_RXMAXP 0xffc03a88 /* Maximum packet size for Host Rx endpoint2 */ +#define USB_EP_NI2_RXCSR 0xffc03a8c /* Control Status register for Host Rx endpoint2 */ +#define USB_EP_NI2_RXCOUNT 0xffc03a90 /* Number of bytes received in endpoint2 FIFO */ +#define USB_EP_NI2_TXTYPE 0xffc03a94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint2 */ +#define USB_EP_NI2_TXINTERVAL 0xffc03a98 /* Sets the NAK response timeout on Endpoint2 */ +#define USB_EP_NI2_RXTYPE 0xffc03a9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint2 */ +#define USB_EP_NI2_RXINTERVAL 0xffc03aa0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint2 */ +#define USB_EP_NI2_TXCOUNT 0xffc03aa8 /* Number of bytes to be written to the endpoint2 Tx FIFO */ + +/* USB Endpoint 3 Control Registers */ + +#define USB_EP_NI3_TXMAXP 0xffc03ac0 /* Maximum packet size for Host Tx endpoint3 */ +#define USB_EP_NI3_TXCSR 0xffc03ac4 /* Control Status register for endpoint3 */ +#define USB_EP_NI3_RXMAXP 0xffc03ac8 /* Maximum packet size for Host Rx endpoint3 */ +#define USB_EP_NI3_RXCSR 0xffc03acc /* Control Status register for Host Rx endpoint3 */ +#define USB_EP_NI3_RXCOUNT 0xffc03ad0 /* Number of bytes received in endpoint3 FIFO */ +#define USB_EP_NI3_TXTYPE 0xffc03ad4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint3 */ +#define USB_EP_NI3_TXINTERVAL 0xffc03ad8 /* Sets the NAK response timeout on Endpoint3 */ +#define USB_EP_NI3_RXTYPE 0xffc03adc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint3 */ +#define USB_EP_NI3_RXINTERVAL 0xffc03ae0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint3 */ +#define USB_EP_NI3_TXCOUNT 0xffc03ae8 /* Number of bytes to be written to the H124endpoint3 Tx FIFO */ + +/* USB Endpoint 4 Control Registers */ + +#define USB_EP_NI4_TXMAXP 0xffc03b00 /* Maximum packet size for Host Tx endpoint4 */ +#define USB_EP_NI4_TXCSR 0xffc03b04 /* Control Status register for endpoint4 */ +#define USB_EP_NI4_RXMAXP 0xffc03b08 /* Maximum packet size for Host Rx endpoint4 */ +#define USB_EP_NI4_RXCSR 0xffc03b0c /* Control Status register for Host Rx endpoint4 */ +#define USB_EP_NI4_RXCOUNT 0xffc03b10 /* Number of bytes received in endpoint4 FIFO */ +#define USB_EP_NI4_TXTYPE 0xffc03b14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint4 */ +#define USB_EP_NI4_TXINTERVAL 0xffc03b18 /* Sets the NAK response timeout on Endpoint4 */ +#define USB_EP_NI4_RXTYPE 0xffc03b1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint4 */ +#define USB_EP_NI4_RXINTERVAL 0xffc03b20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint4 */ +#define USB_EP_NI4_TXCOUNT 0xffc03b28 /* Number of bytes to be written to the endpoint4 Tx FIFO */ + +/* USB Endpoint 5 Control Registers */ + +#define USB_EP_NI5_TXMAXP 0xffc03b40 /* Maximum packet size for Host Tx endpoint5 */ +#define USB_EP_NI5_TXCSR 0xffc03b44 /* Control Status register for endpoint5 */ +#define USB_EP_NI5_RXMAXP 0xffc03b48 /* Maximum packet size for Host Rx endpoint5 */ +#define USB_EP_NI5_RXCSR 0xffc03b4c /* Control Status register for Host Rx endpoint5 */ +#define USB_EP_NI5_RXCOUNT 0xffc03b50 /* Number of bytes received in endpoint5 FIFO */ +#define USB_EP_NI5_TXTYPE 0xffc03b54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint5 */ +#define USB_EP_NI5_TXINTERVAL 0xffc03b58 /* Sets the NAK response timeout on Endpoint5 */ +#define USB_EP_NI5_RXTYPE 0xffc03b5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint5 */ +#define USB_EP_NI5_RXINTERVAL 0xffc03b60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint5 */ +#define USB_EP_NI5_TXCOUNT 0xffc03b68 /* Number of bytes to be written to the endpoint5 Tx FIFO */ + +/* USB Endpoint 6 Control Registers */ + +#define USB_EP_NI6_TXMAXP 0xffc03b80 /* Maximum packet size for Host Tx endpoint6 */ +#define USB_EP_NI6_TXCSR 0xffc03b84 /* Control Status register for endpoint6 */ +#define USB_EP_NI6_RXMAXP 0xffc03b88 /* Maximum packet size for Host Rx endpoint6 */ +#define USB_EP_NI6_RXCSR 0xffc03b8c /* Control Status register for Host Rx endpoint6 */ +#define USB_EP_NI6_RXCOUNT 0xffc03b90 /* Number of bytes received in endpoint6 FIFO */ +#define USB_EP_NI6_TXTYPE 0xffc03b94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint6 */ +#define USB_EP_NI6_TXINTERVAL 0xffc03b98 /* Sets the NAK response timeout on Endpoint6 */ +#define USB_EP_NI6_RXTYPE 0xffc03b9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint6 */ +#define USB_EP_NI6_RXINTERVAL 0xffc03ba0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint6 */ +#define USB_EP_NI6_TXCOUNT 0xffc03ba8 /* Number of bytes to be written to the endpoint6 Tx FIFO */ + +/* USB Endpoint 7 Control Registers */ + +#define USB_EP_NI7_TXMAXP 0xffc03bc0 /* Maximum packet size for Host Tx endpoint7 */ +#define USB_EP_NI7_TXCSR 0xffc03bc4 /* Control Status register for endpoint7 */ +#define USB_EP_NI7_RXMAXP 0xffc03bc8 /* Maximum packet size for Host Rx endpoint7 */ +#define USB_EP_NI7_RXCSR 0xffc03bcc /* Control Status register for Host Rx endpoint7 */ +#define USB_EP_NI7_RXCOUNT 0xffc03bd0 /* Number of bytes received in endpoint7 FIFO */ +#define USB_EP_NI7_TXTYPE 0xffc03bd4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */ +#define USB_EP_NI7_TXINTERVAL 0xffc03bd8 /* Sets the NAK response timeout on Endpoint7 */ +#define USB_EP_NI7_RXTYPE 0xffc03bdc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */ +#define USB_EP_NI7_RXINTERVAL 0xffc03bf0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */ +#define USB_EP_NI7_TXCOUNT 0xffc03bf8 /* Number of bytes to be written to the endpoint7 Tx FIFO */ + +#define USB_DMA_INTERRUPT 0xffc03c00 /* Indicates pending interrupts for the DMA channels */ + +/* USB Channel 0 Config Registers */ + +#define USB_DMA0CONTROL 0xffc03c04 /* DMA master channel 0 configuration */ +#define USB_DMA0ADDRLOW 0xffc03c08 /* Lower 16-bits of memory source/destination address for DMA master channel 0 */ +#define USB_DMA0ADDRHIGH 0xffc03c0c /* Upper 16-bits of memory source/destination address for DMA master channel 0 */ +#define USB_DMA0COUNTLOW 0xffc03c10 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 0 */ +#define USB_DMA0COUNTHIGH 0xffc03c14 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 0 */ + +/* USB Channel 1 Config Registers */ + +#define USB_DMA1CONTROL 0xffc03c24 /* DMA master channel 1 configuration */ +#define USB_DMA1ADDRLOW 0xffc03c28 /* Lower 16-bits of memory source/destination address for DMA master channel 1 */ +#define USB_DMA1ADDRHIGH 0xffc03c2c /* Upper 16-bits of memory source/destination address for DMA master channel 1 */ +#define USB_DMA1COUNTLOW 0xffc03c30 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 1 */ +#define USB_DMA1COUNTHIGH 0xffc03c34 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 1 */ + +/* USB Channel 2 Config Registers */ + +#define USB_DMA2CONTROL 0xffc03c44 /* DMA master channel 2 configuration */ +#define USB_DMA2ADDRLOW 0xffc03c48 /* Lower 16-bits of memory source/destination address for DMA master channel 2 */ +#define USB_DMA2ADDRHIGH 0xffc03c4c /* Upper 16-bits of memory source/destination address for DMA master channel 2 */ +#define USB_DMA2COUNTLOW 0xffc03c50 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 2 */ +#define USB_DMA2COUNTHIGH 0xffc03c54 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 2 */ + +/* USB Channel 3 Config Registers */ + +#define USB_DMA3CONTROL 0xffc03c64 /* DMA master channel 3 configuration */ +#define USB_DMA3ADDRLOW 0xffc03c68 /* Lower 16-bits of memory source/destination address for DMA master channel 3 */ +#define USB_DMA3ADDRHIGH 0xffc03c6c /* Upper 16-bits of memory source/destination address for DMA master channel 3 */ +#define USB_DMA3COUNTLOW 0xffc03c70 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 3 */ +#define USB_DMA3COUNTHIGH 0xffc03c74 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 3 */ + +/* USB Channel 4 Config Registers */ + +#define USB_DMA4CONTROL 0xffc03c84 /* DMA master channel 4 configuration */ +#define USB_DMA4ADDRLOW 0xffc03c88 /* Lower 16-bits of memory source/destination address for DMA master channel 4 */ +#define USB_DMA4ADDRHIGH 0xffc03c8c /* Upper 16-bits of memory source/destination address for DMA master channel 4 */ +#define USB_DMA4COUNTLOW 0xffc03c90 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 4 */ +#define USB_DMA4COUNTHIGH 0xffc03c94 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 4 */ + +/* USB Channel 5 Config Registers */ + +#define USB_DMA5CONTROL 0xffc03ca4 /* DMA master channel 5 configuration */ +#define USB_DMA5ADDRLOW 0xffc03ca8 /* Lower 16-bits of memory source/destination address for DMA master channel 5 */ +#define USB_DMA5ADDRHIGH 0xffc03cac /* Upper 16-bits of memory source/destination address for DMA master channel 5 */ +#define USB_DMA5COUNTLOW 0xffc03cb0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 5 */ +#define USB_DMA5COUNTHIGH 0xffc03cb4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 5 */ + +/* USB Channel 6 Config Registers */ + +#define USB_DMA6CONTROL 0xffc03cc4 /* DMA master channel 6 configuration */ +#define USB_DMA6ADDRLOW 0xffc03cc8 /* Lower 16-bits of memory source/destination address for DMA master channel 6 */ +#define USB_DMA6ADDRHIGH 0xffc03ccc /* Upper 16-bits of memory source/destination address for DMA master channel 6 */ +#define USB_DMA6COUNTLOW 0xffc03cd0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 6 */ +#define USB_DMA6COUNTHIGH 0xffc03cd4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 6 */ + +/* USB Channel 7 Config Registers */ + +#define USB_DMA7CONTROL 0xffc03ce4 /* DMA master channel 7 configuration */ +#define USB_DMA7ADDRLOW 0xffc03ce8 /* Lower 16-bits of memory source/destination address for DMA master channel 7 */ +#define USB_DMA7ADDRHIGH 0xffc03cec /* Upper 16-bits of memory source/destination address for DMA master channel 7 */ +#define USB_DMA7COUNTLOW 0xffc03cf0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 7 */ +#define USB_DMA7COUNTHIGH 0xffc03cf4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 7 */ + +/* Bit masks for USB_FADDR */ + +#define FUNCTION_ADDRESS 0x7f /* Function address */ + +/* Bit masks for USB_POWER */ + +#define ENABLE_SUSPENDM 0x1 /* enable SuspendM output */ +#define nENABLE_SUSPENDM 0x0 +#define SUSPEND_MODE 0x2 /* Suspend Mode indicator */ +#define nSUSPEND_MODE 0x0 +#define RESUME_MODE 0x4 /* DMA Mode */ +#define nRESUME_MODE 0x0 +#define RESET 0x8 /* Reset indicator */ +#define nRESET 0x0 +#define HS_MODE 0x10 /* High Speed mode indicator */ +#define nHS_MODE 0x0 +#define HS_ENABLE 0x20 /* high Speed Enable */ +#define nHS_ENABLE 0x0 +#define SOFT_CONN 0x40 /* Soft connect */ +#define nSOFT_CONN 0x0 +#define ISO_UPDATE 0x80 /* Isochronous update */ +#define nISO_UPDATE 0x0 + +/* Bit masks for USB_INTRTX */ + +#define EP0_TX 0x1 /* Tx Endpoint 0 interrupt */ +#define nEP0_TX 0x0 +#define EP1_TX 0x2 /* Tx Endpoint 1 interrupt */ +#define nEP1_TX 0x0 +#define EP2_TX 0x4 /* Tx Endpoint 2 interrupt */ +#define nEP2_TX 0x0 +#define EP3_TX 0x8 /* Tx Endpoint 3 interrupt */ +#define nEP3_TX 0x0 +#define EP4_TX 0x10 /* Tx Endpoint 4 interrupt */ +#define nEP4_TX 0x0 +#define EP5_TX 0x20 /* Tx Endpoint 5 interrupt */ +#define nEP5_TX 0x0 +#define EP6_TX 0x40 /* Tx Endpoint 6 interrupt */ +#define nEP6_TX 0x0 +#define EP7_TX 0x80 /* Tx Endpoint 7 interrupt */ +#define nEP7_TX 0x0 + +/* Bit masks for USB_INTRRX */ + +#define EP1_RX 0x2 /* Rx Endpoint 1 interrupt */ +#define nEP1_RX 0x0 +#define EP2_RX 0x4 /* Rx Endpoint 2 interrupt */ +#define nEP2_RX 0x0 +#define EP3_RX 0x8 /* Rx Endpoint 3 interrupt */ +#define nEP3_RX 0x0 +#define EP4_RX 0x10 /* Rx Endpoint 4 interrupt */ +#define nEP4_RX 0x0 +#define EP5_RX 0x20 /* Rx Endpoint 5 interrupt */ +#define nEP5_RX 0x0 +#define EP6_RX 0x40 /* Rx Endpoint 6 interrupt */ +#define nEP6_RX 0x0 +#define EP7_RX 0x80 /* Rx Endpoint 7 interrupt */ +#define nEP7_RX 0x0 + +/* Bit masks for USB_INTRTXE */ + +#define EP0_TX_E 0x1 /* Endpoint 0 interrupt Enable */ +#define nEP0_TX_E 0x0 +#define EP1_TX_E 0x2 /* Tx Endpoint 1 interrupt Enable */ +#define nEP1_TX_E 0x0 +#define EP2_TX_E 0x4 /* Tx Endpoint 2 interrupt Enable */ +#define nEP2_TX_E 0x0 +#define EP3_TX_E 0x8 /* Tx Endpoint 3 interrupt Enable */ +#define nEP3_TX_E 0x0 +#define EP4_TX_E 0x10 /* Tx Endpoint 4 interrupt Enable */ +#define nEP4_TX_E 0x0 +#define EP5_TX_E 0x20 /* Tx Endpoint 5 interrupt Enable */ +#define nEP5_TX_E 0x0 +#define EP6_TX_E 0x40 /* Tx Endpoint 6 interrupt Enable */ +#define nEP6_TX_E 0x0 +#define EP7_TX_E 0x80 /* Tx Endpoint 7 interrupt Enable */ +#define nEP7_TX_E 0x0 + +/* Bit masks for USB_INTRRXE */ + +#define EP1_RX_E 0x2 /* Rx Endpoint 1 interrupt Enable */ +#define nEP1_RX_E 0x0 +#define EP2_RX_E 0x4 /* Rx Endpoint 2 interrupt Enable */ +#define nEP2_RX_E 0x0 +#define EP3_RX_E 0x8 /* Rx Endpoint 3 interrupt Enable */ +#define nEP3_RX_E 0x0 +#define EP4_RX_E 0x10 /* Rx Endpoint 4 interrupt Enable */ +#define nEP4_RX_E 0x0 +#define EP5_RX_E 0x20 /* Rx Endpoint 5 interrupt Enable */ +#define nEP5_RX_E 0x0 +#define EP6_RX_E 0x40 /* Rx Endpoint 6 interrupt Enable */ +#define nEP6_RX_E 0x0 +#define EP7_RX_E 0x80 /* Rx Endpoint 7 interrupt Enable */ +#define nEP7_RX_E 0x0 + +/* Bit masks for USB_INTRUSB */ + +#define SUSPEND_B 0x1 /* Suspend indicator */ +#define nSUSPEND_B 0x0 +#define RESUME_B 0x2 /* Resume indicator */ +#define nRESUME_B 0x0 +#define RESET_OR_BABLE_B 0x4 /* Reset/babble indicator */ +#define nRESET_OR_BABLE_B 0x0 +#define SOF_B 0x8 /* Start of frame */ +#define nSOF_B 0x0 +#define CONN_B 0x10 /* Connection indicator */ +#define nCONN_B 0x0 +#define DISCON_B 0x20 /* Disconnect indicator */ +#define nDISCON_B 0x0 +#define SESSION_REQ_B 0x40 /* Session Request */ +#define nSESSION_REQ_B 0x0 +#define VBUS_ERROR_B 0x80 /* Vbus threshold indicator */ +#define nVBUS_ERROR_B 0x0 + +/* Bit masks for USB_INTRUSBE */ + +#define SUSPEND_BE 0x1 /* Suspend indicator int enable */ +#define nSUSPEND_BE 0x0 +#define RESUME_BE 0x2 /* Resume indicator int enable */ +#define nRESUME_BE 0x0 +#define RESET_OR_BABLE_BE 0x4 /* Reset/babble indicator int enable */ +#define nRESET_OR_BABLE_BE 0x0 +#define SOF_BE 0x8 /* Start of frame int enable */ +#define nSOF_BE 0x0 +#define CONN_BE 0x10 /* Connection indicator int enable */ +#define nCONN_BE 0x0 +#define DISCON_BE 0x20 /* Disconnect indicator int enable */ +#define nDISCON_BE 0x0 +#define SESSION_REQ_BE 0x40 /* Session Request int enable */ +#define nSESSION_REQ_BE 0x0 +#define VBUS_ERROR_BE 0x80 /* Vbus threshold indicator int enable */ +#define nVBUS_ERROR_BE 0x0 + +/* Bit masks for USB_FRAME */ + +#define FRAME_NUMBER 0x7ff /* Frame number */ + +/* Bit masks for USB_INDEX */ + +#define SELECTED_ENDPOINT 0xf /* selected endpoint */ + +/* Bit masks for USB_GLOBAL_CTL */ + +#define GLOBAL_ENA 0x1 /* enables USB module */ +#define nGLOBAL_ENA 0x0 +#define EP1_TX_ENA 0x2 /* Transmit endpoint 1 enable */ +#define nEP1_TX_ENA 0x0 +#define EP2_TX_ENA 0x4 /* Transmit endpoint 2 enable */ +#define nEP2_TX_ENA 0x0 +#define EP3_TX_ENA 0x8 /* Transmit endpoint 3 enable */ +#define nEP3_TX_ENA 0x0 +#define EP4_TX_ENA 0x10 /* Transmit endpoint 4 enable */ +#define nEP4_TX_ENA 0x0 +#define EP5_TX_ENA 0x20 /* Transmit endpoint 5 enable */ +#define nEP5_TX_ENA 0x0 +#define EP6_TX_ENA 0x40 /* Transmit endpoint 6 enable */ +#define nEP6_TX_ENA 0x0 +#define EP7_TX_ENA 0x80 /* Transmit endpoint 7 enable */ +#define nEP7_TX_ENA 0x0 +#define EP1_RX_ENA 0x100 /* Receive endpoint 1 enable */ +#define nEP1_RX_ENA 0x0 +#define EP2_RX_ENA 0x200 /* Receive endpoint 2 enable */ +#define nEP2_RX_ENA 0x0 +#define EP3_RX_ENA 0x400 /* Receive endpoint 3 enable */ +#define nEP3_RX_ENA 0x0 +#define EP4_RX_ENA 0x800 /* Receive endpoint 4 enable */ +#define nEP4_RX_ENA 0x0 +#define EP5_RX_ENA 0x1000 /* Receive endpoint 5 enable */ +#define nEP5_RX_ENA 0x0 +#define EP6_RX_ENA 0x2000 /* Receive endpoint 6 enable */ +#define nEP6_RX_ENA 0x0 +#define EP7_RX_ENA 0x4000 /* Receive endpoint 7 enable */ +#define nEP7_RX_ENA 0x0 + +/* Bit masks for USB_OTG_DEV_CTL */ + +#define SESSION 0x1 /* session indicator */ +#define nSESSION 0x0 +#define HOST_REQ 0x2 /* Host negotiation request */ +#define nHOST_REQ 0x0 +#define HOST_MODE 0x4 /* indicates USBDRC is a host */ +#define nHOST_MODE 0x0 +#define VBUS0 0x8 /* Vbus level indicator[0] */ +#define nVBUS0 0x0 +#define VBUS1 0x10 /* Vbus level indicator[1] */ +#define nVBUS1 0x0 +#define LSDEV 0x20 /* Low-speed indicator */ +#define nLSDEV 0x0 +#define FSDEV 0x40 /* Full or High-speed indicator */ +#define nFSDEV 0x0 +#define B_DEVICE 0x80 /* A' or 'B' device indicator */ +#define nB_DEVICE 0x0 + +/* Bit masks for USB_OTG_VBUS_IRQ */ + +#define DRIVE_VBUS_ON 0x1 /* indicator to drive VBUS control circuit */ +#define nDRIVE_VBUS_ON 0x0 +#define DRIVE_VBUS_OFF 0x2 /* indicator to shut off charge pump */ +#define nDRIVE_VBUS_OFF 0x0 +#define CHRG_VBUS_START 0x4 /* indicator for external circuit to start charging VBUS */ +#define nCHRG_VBUS_START 0x0 +#define CHRG_VBUS_END 0x8 /* indicator for external circuit to end charging VBUS */ +#define nCHRG_VBUS_END 0x0 +#define DISCHRG_VBUS_START 0x10 /* indicator to start discharging VBUS */ +#define nDISCHRG_VBUS_START 0x0 +#define DISCHRG_VBUS_END 0x20 /* indicator to stop discharging VBUS */ +#define nDISCHRG_VBUS_END 0x0 + +/* Bit masks for USB_OTG_VBUS_MASK */ + +#define DRIVE_VBUS_ON_ENA 0x1 /* enable DRIVE_VBUS_ON interrupt */ +#define nDRIVE_VBUS_ON_ENA 0x0 +#define DRIVE_VBUS_OFF_ENA 0x2 /* enable DRIVE_VBUS_OFF interrupt */ +#define nDRIVE_VBUS_OFF_ENA 0x0 +#define CHRG_VBUS_START_ENA 0x4 /* enable CHRG_VBUS_START interrupt */ +#define nCHRG_VBUS_START_ENA 0x0 +#define CHRG_VBUS_END_ENA 0x8 /* enable CHRG_VBUS_END interrupt */ +#define nCHRG_VBUS_END_ENA 0x0 +#define DISCHRG_VBUS_START_ENA 0x10 /* enable DISCHRG_VBUS_START interrupt */ +#define nDISCHRG_VBUS_START_ENA 0x0 +#define DISCHRG_VBUS_END_ENA 0x20 /* enable DISCHRG_VBUS_END interrupt */ +#define nDISCHRG_VBUS_END_ENA 0x0 + +/* Bit masks for USB_CSR0 */ + +#define RXPKTRDY 0x1 /* data packet receive indicator */ +#define nRXPKTRDY 0x0 +#define TXPKTRDY 0x2 /* data packet in FIFO indicator */ +#define nTXPKTRDY 0x0 +#define STALL_SENT 0x4 /* STALL handshake sent */ +#define nSTALL_SENT 0x0 +#define DATAEND 0x8 /* Data end indicator */ +#define nDATAEND 0x0 +#define SETUPEND 0x10 /* Setup end */ +#define nSETUPEND 0x0 +#define SENDSTALL 0x20 /* Send STALL handshake */ +#define nSENDSTALL 0x0 +#define SERVICED_RXPKTRDY 0x40 /* used to clear the RxPktRdy bit */ +#define nSERVICED_RXPKTRDY 0x0 +#define SERVICED_SETUPEND 0x80 /* used to clear the SetupEnd bit */ +#define nSERVICED_SETUPEND 0x0 +#define FLUSHFIFO 0x100 /* flush endpoint FIFO */ +#define nFLUSHFIFO 0x0 +#define STALL_RECEIVED_H 0x4 /* STALL handshake received host mode */ +#define nSTALL_RECEIVED_H 0x0 +#define SETUPPKT_H 0x8 /* send Setup token host mode */ +#define nSETUPPKT_H 0x0 +#define ERROR_H 0x10 /* timeout error indicator host mode */ +#define nERROR_H 0x0 +#define REQPKT_H 0x20 /* Request an IN transaction host mode */ +#define nREQPKT_H 0x0 +#define STATUSPKT_H 0x40 /* Status stage transaction host mode */ +#define nSTATUSPKT_H 0x0 +#define NAK_TIMEOUT_H 0x80 /* EP0 halted after a NAK host mode */ +#define nNAK_TIMEOUT_H 0x0 + +/* Bit masks for USB_COUNT0 */ + +#define EP0_RX_COUNT 0x7f /* number of received bytes in EP0 FIFO */ + +/* Bit masks for USB_NAKLIMIT0 */ + +#define EP0_NAK_LIMIT 0x1f /* number of frames/micro frames after which EP0 timeouts */ + +/* Bit masks for USB_TX_MAX_PACKET */ + +#define MAX_PACKET_SIZE_T 0x7ff /* maximum data pay load in a frame */ + +/* Bit masks for USB_RX_MAX_PACKET */ + +#define MAX_PACKET_SIZE_R 0x7ff /* maximum data pay load in a frame */ + +/* Bit masks for USB_TXCSR */ + +#define TXPKTRDY_T 0x1 /* data packet in FIFO indicator */ +#define nTXPKTRDY_T 0x0 +#define FIFO_NOT_EMPTY_T 0x2 /* FIFO not empty */ +#define nFIFO_NOT_EMPTY_T 0x0 +#define UNDERRUN_T 0x4 /* TxPktRdy not set for an IN token */ +#define nUNDERRUN_T 0x0 +#define FLUSHFIFO_T 0x8 /* flush endpoint FIFO */ +#define nFLUSHFIFO_T 0x0 +#define STALL_SEND_T 0x10 /* issue a Stall handshake */ +#define nSTALL_SEND_T 0x0 +#define STALL_SENT_T 0x20 /* Stall handshake transmitted */ +#define nSTALL_SENT_T 0x0 +#define CLEAR_DATATOGGLE_T 0x40 /* clear endpoint data toggle */ +#define nCLEAR_DATATOGGLE_T 0x0 +#define INCOMPTX_T 0x80 /* indicates that a large packet is split */ +#define nINCOMPTX_T 0x0 +#define DMAREQMODE_T 0x400 /* DMA mode (0 or 1) selection */ +#define nDMAREQMODE_T 0x0 +#define FORCE_DATATOGGLE_T 0x800 /* Force data toggle */ +#define nFORCE_DATATOGGLE_T 0x0 +#define DMAREQ_ENA_T 0x1000 /* Enable DMA request for Tx EP */ +#define nDMAREQ_ENA_T 0x0 +#define ISO_T 0x4000 /* enable Isochronous transfers */ +#define nISO_T 0x0 +#define AUTOSET_T 0x8000 /* allows TxPktRdy to be set automatically */ +#define nAUTOSET_T 0x0 +#define ERROR_TH 0x4 /* error condition host mode */ +#define nERROR_TH 0x0 +#define STALL_RECEIVED_TH 0x20 /* Stall handshake received host mode */ +#define nSTALL_RECEIVED_TH 0x0 +#define NAK_TIMEOUT_TH 0x80 /* NAK timeout host mode */ +#define nNAK_TIMEOUT_TH 0x0 + +/* Bit masks for USB_TXCOUNT */ + +#define TX_COUNT 0x1fff /* Number of bytes to be written to the selected endpoint Tx FIFO */ + +/* Bit masks for USB_RXCSR */ + +#define RXPKTRDY_R 0x1 /* data packet in FIFO indicator */ +#define nRXPKTRDY_R 0x0 +#define FIFO_FULL_R 0x2 /* FIFO not empty */ +#define nFIFO_FULL_R 0x0 +#define OVERRUN_R 0x4 /* TxPktRdy not set for an IN token */ +#define nOVERRUN_R 0x0 +#define DATAERROR_R 0x8 /* Out packet cannot be loaded into Rx FIFO */ +#define nDATAERROR_R 0x0 +#define FLUSHFIFO_R 0x10 /* flush endpoint FIFO */ +#define nFLUSHFIFO_R 0x0 +#define STALL_SEND_R 0x20 /* issue a Stall handshake */ +#define nSTALL_SEND_R 0x0 +#define STALL_SENT_R 0x40 /* Stall handshake transmitted */ +#define nSTALL_SENT_R 0x0 +#define CLEAR_DATATOGGLE_R 0x80 /* clear endpoint data toggle */ +#define nCLEAR_DATATOGGLE_R 0x0 +#define INCOMPRX_R 0x100 /* indicates that a large packet is split */ +#define nINCOMPRX_R 0x0 +#define DMAREQMODE_R 0x800 /* DMA mode (0 or 1) selection */ +#define nDMAREQMODE_R 0x0 +#define DISNYET_R 0x1000 /* disable Nyet handshakes */ +#define nDISNYET_R 0x0 +#define DMAREQ_ENA_R 0x2000 /* Enable DMA request for Tx EP */ +#define nDMAREQ_ENA_R 0x0 +#define ISO_R 0x4000 /* enable Isochronous transfers */ +#define nISO_R 0x0 +#define AUTOCLEAR_R 0x8000 /* allows TxPktRdy to be set automatically */ +#define nAUTOCLEAR_R 0x0 +#define ERROR_RH 0x4 /* TxPktRdy not set for an IN token host mode */ +#define nERROR_RH 0x0 +#define REQPKT_RH 0x20 /* request an IN transaction host mode */ +#define nREQPKT_RH 0x0 +#define STALL_RECEIVED_RH 0x40 /* Stall handshake received host mode */ +#define nSTALL_RECEIVED_RH 0x0 +#define INCOMPRX_RH 0x100 /* indicates that a large packet is split host mode */ +#define nINCOMPRX_RH 0x0 +#define DMAREQMODE_RH 0x800 /* DMA mode (0 or 1) selection host mode */ +#define nDMAREQMODE_RH 0x0 +#define AUTOREQ_RH 0x4000 /* sets ReqPkt automatically host mode */ +#define nAUTOREQ_RH 0x0 + +/* Bit masks for USB_RXCOUNT */ + +#define RX_COUNT 0x1fff /* Number of received bytes in the packet in the Rx FIFO */ + +/* Bit masks for USB_TXTYPE */ + +#define TARGET_EP_NO_T 0xf /* EP number */ +#define PROTOCOL_T 0xc /* transfer type */ + +/* Bit masks for USB_TXINTERVAL */ + +#define TX_POLL_INTERVAL 0xff /* polling interval for selected Tx EP */ + +/* Bit masks for USB_RXTYPE */ + +#define TARGET_EP_NO_R 0xf /* EP number */ +#define PROTOCOL_R 0xc /* transfer type */ + +/* Bit masks for USB_RXINTERVAL */ + +#define RX_POLL_INTERVAL 0xff /* polling interval for selected Rx EP */ + +/* Bit masks for USB_DMA_INTERRUPT */ + +#define DMA0_INT 0x1 /* DMA0 pending interrupt */ +#define nDMA0_INT 0x0 +#define DMA1_INT 0x2 /* DMA1 pending interrupt */ +#define nDMA1_INT 0x0 +#define DMA2_INT 0x4 /* DMA2 pending interrupt */ +#define nDMA2_INT 0x0 +#define DMA3_INT 0x8 /* DMA3 pending interrupt */ +#define nDMA3_INT 0x0 +#define DMA4_INT 0x10 /* DMA4 pending interrupt */ +#define nDMA4_INT 0x0 +#define DMA5_INT 0x20 /* DMA5 pending interrupt */ +#define nDMA5_INT 0x0 +#define DMA6_INT 0x40 /* DMA6 pending interrupt */ +#define nDMA6_INT 0x0 +#define DMA7_INT 0x80 /* DMA7 pending interrupt */ +#define nDMA7_INT 0x0 + +/* Bit masks for USB_DMAxCONTROL */ + +#define DMA_ENA 0x1 /* DMA enable */ +#define nDMA_ENA 0x0 +#define DIRECTION 0x2 /* direction of DMA transfer */ +#define nDIRECTION 0x0 +#define MODE 0x4 /* DMA Bus error */ +#define nMODE 0x0 +#define INT_ENA 0x8 /* Interrupt enable */ +#define nINT_ENA 0x0 +#define EPNUM 0xf0 /* EP number */ +#define BUSERROR 0x100 /* DMA Bus error */ +#define nBUSERROR 0x0 + +/* Bit masks for USB_DMAxADDRHIGH */ + +#define DMA_ADDR_HIGH 0xffff /* Upper 16-bits of memory source/destination address for the DMA master channel */ + +/* Bit masks for USB_DMAxADDRLOW */ + +#define DMA_ADDR_LOW 0xffff /* Lower 16-bits of memory source/destination address for the DMA master channel */ + +/* Bit masks for USB_DMAxCOUNTHIGH */ + +#define DMA_COUNT_HIGH 0xffff /* Upper 16-bits of byte count of DMA transfer for DMA master channel */ + +/* Bit masks for USB_DMAxCOUNTLOW */ + +#define DMA_COUNT_LOW 0xffff /* Lower 16-bits of byte count of DMA transfer for DMA master channel */ + +#endif /* _DEF_BF527_H */ diff --git a/include/asm-blackfin/mach-bf527/defBF52x_base.h b/include/asm-blackfin/mach-bf527/defBF52x_base.h new file mode 100644 index 00000000000000..0b2fb5036ed0c9 --- /dev/null +++ b/include/asm-blackfin/mach-bf527/defBF52x_base.h @@ -0,0 +1,2009 @@ +/* + * File: include/asm-blackfin/mach-bf527/defBF52x_base.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _DEF_BF52X_H +#define _DEF_BF52X_H + + +/* ************************************************************** */ +/* SYSTEM & MMR ADDRESS DEFINITIONS COMMON TO ALL ADSP-BF52x */ +/* ************************************************************** */ + +/* ==== begin from defBF534.h ==== */ + +/* Clock and System Control (0xFFC00000 - 0xFFC000FF) */ +#define PLL_CTL 0xFFC00000 /* PLL Control Register */ +#define PLL_DIV 0xFFC00004 /* PLL Divide Register */ +#define VR_CTL 0xFFC00008 /* Voltage Regulator Control Register */ +#define PLL_STAT 0xFFC0000C /* PLL Status Register */ +#define PLL_LOCKCNT 0xFFC00010 /* PLL Lock Count Register */ +#define CHIPID 0xFFC00014 /* Device ID Register */ + + +/* System Interrupt Controller (0xFFC00100 - 0xFFC001FF) */ +#define SWRST 0xFFC00100 /* Software Reset Register */ +#define SYSCR 0xFFC00104 /* System Configuration Register */ +#define SIC_RVECT 0xFFC00108 /* Interrupt Reset Vector Address Register */ + +#define SIC_IMASK 0xFFC0010C /* Interrupt Mask Register */ +#define SIC_IAR0 0xFFC00110 /* Interrupt Assignment Register 0 */ +#define SIC_IAR1 0xFFC00114 /* Interrupt Assignment Register 1 */ +#define SIC_IAR2 0xFFC00118 /* Interrupt Assignment Register 2 */ +#define SIC_IAR3 0xFFC0011C /* Interrupt Assignment Register 3 */ +#define SIC_ISR 0xFFC00120 /* Interrupt Status Register */ +#define SIC_IWR 0xFFC00124 /* Interrupt Wakeup Register */ + +/* SIC Additions to ADSP-BF52x (0xFFC0014C - 0xFFC00162) */ +#define SIC_IMASK1 0xFFC0014C /* Interrupt Mask register of SIC2 */ +#define SIC_IAR4 0xFFC00150 /* Interrupt Assignment register4 */ +#define SIC_IAR5 0xFFC00154 /* Interrupt Assignment register5 */ +#define SIC_IAR6 0xFFC00158 /* Interrupt Assignment register6 */ +#define SIC_IAR7 0xFFC0015C /* Interrupt Assignment register7 */ +#define SIC_ISR1 0xFFC00160 /* Interrupt Statur register */ +#define SIC_IWR1 0xFFC00164 /* Interrupt Wakeup register */ + + +/* Watchdog Timer (0xFFC00200 - 0xFFC002FF) */ +#define WDOG_CTL 0xFFC00200 /* Watchdog Control Register */ +#define WDOG_CNT 0xFFC00204 /* Watchdog Count Register */ +#define WDOG_STAT 0xFFC00208 /* Watchdog Status Register */ + + +/* Real Time Clock (0xFFC00300 - 0xFFC003FF) */ +#define RTC_STAT 0xFFC00300 /* RTC Status Register */ +#define RTC_ICTL 0xFFC00304 /* RTC Interrupt Control Register */ +#define RTC_ISTAT 0xFFC00308 /* RTC Interrupt Status Register */ +#define RTC_SWCNT 0xFFC0030C /* RTC Stopwatch Count Register */ +#define RTC_ALARM 0xFFC00310 /* RTC Alarm Time Register */ +#define RTC_FAST 0xFFC00314 /* RTC Prescaler Enable Register */ +#define RTC_PREN 0xFFC00314 /* RTC Prescaler Enable Alternate Macro */ + + +/* UART0 Controller (0xFFC00400 - 0xFFC004FF) */ +#define UART0_THR 0xFFC00400 /* Transmit Holding register */ +#define UART0_RBR 0xFFC00400 /* Receive Buffer register */ +#define UART0_DLL 0xFFC00400 /* Divisor Latch (Low-Byte) */ +#define UART0_IER 0xFFC00404 /* Interrupt Enable Register */ +#define UART0_DLH 0xFFC00404 /* Divisor Latch (High-Byte) */ +#define UART0_IIR 0xFFC00408 /* Interrupt Identification Register */ +#define UART0_LCR 0xFFC0040C /* Line Control Register */ +#define UART0_MCR 0xFFC00410 /* Modem Control Register */ +#define UART0_LSR 0xFFC00414 /* Line Status Register */ +#define UART0_MSR 0xFFC00418 /* Modem Status Register */ +#define UART0_SCR 0xFFC0041C /* SCR Scratch Register */ +#define UART0_GCTL 0xFFC00424 /* Global Control Register */ + + +/* SPI Controller (0xFFC00500 - 0xFFC005FF) */ +#define SPI_CTL 0xFFC00500 /* SPI Control Register */ +#define SPI_FLG 0xFFC00504 /* SPI Flag register */ +#define SPI_STAT 0xFFC00508 /* SPI Status register */ +#define SPI_TDBR 0xFFC0050C /* SPI Transmit Data Buffer Register */ +#define SPI_RDBR 0xFFC00510 /* SPI Receive Data Buffer Register */ +#define SPI_BAUD 0xFFC00514 /* SPI Baud rate Register */ +#define SPI_SHADOW 0xFFC00518 /* SPI_RDBR Shadow Register */ + + +/* TIMER0-7 Registers (0xFFC00600 - 0xFFC006FF) */ +#define TIMER0_CONFIG 0xFFC00600 /* Timer 0 Configuration Register */ +#define TIMER0_COUNTER 0xFFC00604 /* Timer 0 Counter Register */ +#define TIMER0_PERIOD 0xFFC00608 /* Timer 0 Period Register */ +#define TIMER0_WIDTH 0xFFC0060C /* Timer 0 Width Register */ + +#define TIMER1_CONFIG 0xFFC00610 /* Timer 1 Configuration Register */ +#define TIMER1_COUNTER 0xFFC00614 /* Timer 1 Counter Register */ +#define TIMER1_PERIOD 0xFFC00618 /* Timer 1 Period Register */ +#define TIMER1_WIDTH 0xFFC0061C /* Timer 1 Width Register */ + +#define TIMER2_CONFIG 0xFFC00620 /* Timer 2 Configuration Register */ +#define TIMER2_COUNTER 0xFFC00624 /* Timer 2 Counter Register */ +#define TIMER2_PERIOD 0xFFC00628 /* Timer 2 Period Register */ +#define TIMER2_WIDTH 0xFFC0062C /* Timer 2 Width Register */ + +#define TIMER3_CONFIG 0xFFC00630 /* Timer 3 Configuration Register */ +#define TIMER3_COUNTER 0xFFC00634 /* Timer 3 Counter Register */ +#define TIMER3_PERIOD 0xFFC00638 /* Timer 3 Period Register */ +#define TIMER3_WIDTH 0xFFC0063C /* Timer 3 Width Register */ + +#define TIMER4_CONFIG 0xFFC00640 /* Timer 4 Configuration Register */ +#define TIMER4_COUNTER 0xFFC00644 /* Timer 4 Counter Register */ +#define TIMER4_PERIOD 0xFFC00648 /* Timer 4 Period Register */ +#define TIMER4_WIDTH 0xFFC0064C /* Timer 4 Width Register */ + +#define TIMER5_CONFIG 0xFFC00650 /* Timer 5 Configuration Register */ +#define TIMER5_COUNTER 0xFFC00654 /* Timer 5 Counter Register */ +#define TIMER5_PERIOD 0xFFC00658 /* Timer 5 Period Register */ +#define TIMER5_WIDTH 0xFFC0065C /* Timer 5 Width Register */ + +#define TIMER6_CONFIG 0xFFC00660 /* Timer 6 Configuration Register */ +#define TIMER6_COUNTER 0xFFC00664 /* Timer 6 Counter Register */ +#define TIMER6_PERIOD 0xFFC00668 /* Timer 6 Period Register */ +#define TIMER6_WIDTH 0xFFC0066C /* Timer 6 Width Register */ + +#define TIMER7_CONFIG 0xFFC00670 /* Timer 7 Configuration Register */ +#define TIMER7_COUNTER 0xFFC00674 /* Timer 7 Counter Register */ +#define TIMER7_PERIOD 0xFFC00678 /* Timer 7 Period Register */ +#define TIMER7_WIDTH 0xFFC0067C /* Timer 7 Width Register */ + +#define TIMER_ENABLE 0xFFC00680 /* Timer Enable Register */ +#define TIMER_DISABLE 0xFFC00684 /* Timer Disable Register */ +#define TIMER_STATUS 0xFFC00688 /* Timer Status Register */ + + +/* General Purpose I/O Port F (0xFFC00700 - 0xFFC007FF) */ +#define PORTFIO 0xFFC00700 /* Port F I/O Pin State Specify Register */ +#define PORTFIO_CLEAR 0xFFC00704 /* Port F I/O Peripheral Interrupt Clear Register */ +#define PORTFIO_SET 0xFFC00708 /* Port F I/O Peripheral Interrupt Set Register */ +#define PORTFIO_TOGGLE 0xFFC0070C /* Port F I/O Pin State Toggle Register */ +#define PORTFIO_MASKA 0xFFC00710 /* Port F I/O Mask State Specify Interrupt A Register */ +#define PORTFIO_MASKA_CLEAR 0xFFC00714 /* Port F I/O Mask Disable Interrupt A Register */ +#define PORTFIO_MASKA_SET 0xFFC00718 /* Port F I/O Mask Enable Interrupt A Register */ +#define PORTFIO_MASKA_TOGGLE 0xFFC0071C /* Port F I/O Mask Toggle Enable Interrupt A Register */ +#define PORTFIO_MASKB 0xFFC00720 /* Port F I/O Mask State Specify Interrupt B Register */ +#define PORTFIO_MASKB_CLEAR 0xFFC00724 /* Port F I/O Mask Disable Interrupt B Register */ +#define PORTFIO_MASKB_SET 0xFFC00728 /* Port F I/O Mask Enable Interrupt B Register */ +#define PORTFIO_MASKB_TOGGLE 0xFFC0072C /* Port F I/O Mask Toggle Enable Interrupt B Register */ +#define PORTFIO_DIR 0xFFC00730 /* Port F I/O Direction Register */ +#define PORTFIO_POLAR 0xFFC00734 /* Port F I/O Source Polarity Register */ +#define PORTFIO_EDGE 0xFFC00738 /* Port F I/O Source Sensitivity Register */ +#define PORTFIO_BOTH 0xFFC0073C /* Port F I/O Set on BOTH Edges Register */ +#define PORTFIO_INEN 0xFFC00740 /* Port F I/O Input Enable Register */ + + +/* SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */ +#define SPORT0_TCR1 0xFFC00800 /* SPORT0 Transmit Configuration 1 Register */ +#define SPORT0_TCR2 0xFFC00804 /* SPORT0 Transmit Configuration 2 Register */ +#define SPORT0_TCLKDIV 0xFFC00808 /* SPORT0 Transmit Clock Divider */ +#define SPORT0_TFSDIV 0xFFC0080C /* SPORT0 Transmit Frame Sync Divider */ +#define SPORT0_TX 0xFFC00810 /* SPORT0 TX Data Register */ +#define SPORT0_RX 0xFFC00818 /* SPORT0 RX Data Register */ +#define SPORT0_RCR1 0xFFC00820 /* SPORT0 Transmit Configuration 1 Register */ +#define SPORT0_RCR2 0xFFC00824 /* SPORT0 Transmit Configuration 2 Register */ +#define SPORT0_RCLKDIV 0xFFC00828 /* SPORT0 Receive Clock Divider */ +#define SPORT0_RFSDIV 0xFFC0082C /* SPORT0 Receive Frame Sync Divider */ +#define SPORT0_STAT 0xFFC00830 /* SPORT0 Status Register */ +#define SPORT0_CHNL 0xFFC00834 /* SPORT0 Current Channel Register */ +#define SPORT0_MCMC1 0xFFC00838 /* SPORT0 Multi-Channel Configuration Register 1 */ +#define SPORT0_MCMC2 0xFFC0083C /* SPORT0 Multi-Channel Configuration Register 2 */ +#define SPORT0_MTCS0 0xFFC00840 /* SPORT0 Multi-Channel Transmit Select Register 0 */ +#define SPORT0_MTCS1 0xFFC00844 /* SPORT0 Multi-Channel Transmit Select Register 1 */ +#define SPORT0_MTCS2 0xFFC00848 /* SPORT0 Multi-Channel Transmit Select Register 2 */ +#define SPORT0_MTCS3 0xFFC0084C /* SPORT0 Multi-Channel Transmit Select Register 3 */ +#define SPORT0_MRCS0 0xFFC00850 /* SPORT0 Multi-Channel Receive Select Register 0 */ +#define SPORT0_MRCS1 0xFFC00854 /* SPORT0 Multi-Channel Receive Select Register 1 */ +#define SPORT0_MRCS2 0xFFC00858 /* SPORT0 Multi-Channel Receive Select Register 2 */ +#define SPORT0_MRCS3 0xFFC0085C /* SPORT0 Multi-Channel Receive Select Register 3 */ + + +/* SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */ +#define SPORT1_TCR1 0xFFC00900 /* SPORT1 Transmit Configuration 1 Register */ +#define SPORT1_TCR2 0xFFC00904 /* SPORT1 Transmit Configuration 2 Register */ +#define SPORT1_TCLKDIV 0xFFC00908 /* SPORT1 Transmit Clock Divider */ +#define SPORT1_TFSDIV 0xFFC0090C /* SPORT1 Transmit Frame Sync Divider */ +#define SPORT1_TX 0xFFC00910 /* SPORT1 TX Data Register */ +#define SPORT1_RX 0xFFC00918 /* SPORT1 RX Data Register */ +#define SPORT1_RCR1 0xFFC00920 /* SPORT1 Transmit Configuration 1 Register */ +#define SPORT1_RCR2 0xFFC00924 /* SPORT1 Transmit Configuration 2 Register */ +#define SPORT1_RCLKDIV 0xFFC00928 /* SPORT1 Receive Clock Divider */ +#define SPORT1_RFSDIV 0xFFC0092C /* SPORT1 Receive Frame Sync Divider */ +#define SPORT1_STAT 0xFFC00930 /* SPORT1 Status Register */ +#define SPORT1_CHNL 0xFFC00934 /* SPORT1 Current Channel Register */ +#define SPORT1_MCMC1 0xFFC00938 /* SPORT1 Multi-Channel Configuration Register 1 */ +#define SPORT1_MCMC2 0xFFC0093C /* SPORT1 Multi-Channel Configuration Register 2 */ +#define SPORT1_MTCS0 0xFFC00940 /* SPORT1 Multi-Channel Transmit Select Register 0 */ +#define SPORT1_MTCS1 0xFFC00944 /* SPORT1 Multi-Channel Transmit Select Register 1 */ +#define SPORT1_MTCS2 0xFFC00948 /* SPORT1 Multi-Channel Transmit Select Register 2 */ +#define SPORT1_MTCS3 0xFFC0094C /* SPORT1 Multi-Channel Transmit Select Register 3 */ +#define SPORT1_MRCS0 0xFFC00950 /* SPORT1 Multi-Channel Receive Select Register 0 */ +#define SPORT1_MRCS1 0xFFC00954 /* SPORT1 Multi-Channel Receive Select Register 1 */ +#define SPORT1_MRCS2 0xFFC00958 /* SPORT1 Multi-Channel Receive Select Register 2 */ +#define SPORT1_MRCS3 0xFFC0095C /* SPORT1 Multi-Channel Receive Select Register 3 */ + + +/* External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF) */ +#define EBIU_AMGCTL 0xFFC00A00 /* Asynchronous Memory Global Control Register */ +#define EBIU_AMBCTL0 0xFFC00A04 /* Asynchronous Memory Bank Control Register 0 */ +#define EBIU_AMBCTL1 0xFFC00A08 /* Asynchronous Memory Bank Control Register 1 */ +#define EBIU_SDGCTL 0xFFC00A10 /* SDRAM Global Control Register */ +#define EBIU_SDBCTL 0xFFC00A14 /* SDRAM Bank Control Register */ +#define EBIU_SDRRC 0xFFC00A18 /* SDRAM Refresh Rate Control Register */ +#define EBIU_SDSTAT 0xFFC00A1C /* SDRAM Status Register */ + + +/* DMA Traffic Control Registers */ +#define DMA_TC_PER 0xFFC00B0C /* Traffic Control Periods Register */ +#define DMA_TC_CNT 0xFFC00B10 /* Traffic Control Current Counts Register */ + +/* Alternate deprecated register names (below) provided for backwards code compatibility */ +#define DMA_TCPER 0xFFC00B0C /* Traffic Control Periods Register */ +#define DMA_TCCNT 0xFFC00B10 /* Traffic Control Current Counts Register */ + +/* DMA Controller (0xFFC00C00 - 0xFFC00FFF) */ +#define DMA0_NEXT_DESC_PTR 0xFFC00C00 /* DMA Channel 0 Next Descriptor Pointer Register */ +#define DMA0_START_ADDR 0xFFC00C04 /* DMA Channel 0 Start Address Register */ +#define DMA0_CONFIG 0xFFC00C08 /* DMA Channel 0 Configuration Register */ +#define DMA0_X_COUNT 0xFFC00C10 /* DMA Channel 0 X Count Register */ +#define DMA0_X_MODIFY 0xFFC00C14 /* DMA Channel 0 X Modify Register */ +#define DMA0_Y_COUNT 0xFFC00C18 /* DMA Channel 0 Y Count Register */ +#define DMA0_Y_MODIFY 0xFFC00C1C /* DMA Channel 0 Y Modify Register */ +#define DMA0_CURR_DESC_PTR 0xFFC00C20 /* DMA Channel 0 Current Descriptor Pointer Register */ +#define DMA0_CURR_ADDR 0xFFC00C24 /* DMA Channel 0 Current Address Register */ +#define DMA0_IRQ_STATUS 0xFFC00C28 /* DMA Channel 0 Interrupt/Status Register */ +#define DMA0_PERIPHERAL_MAP 0xFFC00C2C /* DMA Channel 0 Peripheral Map Register */ +#define DMA0_CURR_X_COUNT 0xFFC00C30 /* DMA Channel 0 Current X Count Register */ +#define DMA0_CURR_Y_COUNT 0xFFC00C38 /* DMA Channel 0 Current Y Count Register */ + +#define DMA1_NEXT_DESC_PTR 0xFFC00C40 /* DMA Channel 1 Next Descriptor Pointer Register */ +#define DMA1_START_ADDR 0xFFC00C44 /* DMA Channel 1 Start Address Register */ +#define DMA1_CONFIG 0xFFC00C48 /* DMA Channel 1 Configuration Register */ +#define DMA1_X_COUNT 0xFFC00C50 /* DMA Channel 1 X Count Register */ +#define DMA1_X_MODIFY 0xFFC00C54 /* DMA Channel 1 X Modify Register */ +#define DMA1_Y_COUNT 0xFFC00C58 /* DMA Channel 1 Y Count Register */ +#define DMA1_Y_MODIFY 0xFFC00C5C /* DMA Channel 1 Y Modify Register */ +#define DMA1_CURR_DESC_PTR 0xFFC00C60 /* DMA Channel 1 Current Descriptor Pointer Register */ +#define DMA1_CURR_ADDR 0xFFC00C64 /* DMA Channel 1 Current Address Register */ +#define DMA1_IRQ_STATUS 0xFFC00C68 /* DMA Channel 1 Interrupt/Status Register */ +#define DMA1_PERIPHERAL_MAP 0xFFC00C6C /* DMA Channel 1 Peripheral Map Register */ +#define DMA1_CURR_X_COUNT 0xFFC00C70 /* DMA Channel 1 Current X Count Register */ +#define DMA1_CURR_Y_COUNT 0xFFC00C78 /* DMA Channel 1 Current Y Count Register */ + +#define DMA2_NEXT_DESC_PTR 0xFFC00C80 /* DMA Channel 2 Next Descriptor Pointer Register */ +#define DMA2_START_ADDR 0xFFC00C84 /* DMA Channel 2 Start Address Register */ +#define DMA2_CONFIG 0xFFC00C88 /* DMA Channel 2 Configuration Register */ +#define DMA2_X_COUNT 0xFFC00C90 /* DMA Channel 2 X Count Register */ +#define DMA2_X_MODIFY 0xFFC00C94 /* DMA Channel 2 X Modify Register */ +#define DMA2_Y_COUNT 0xFFC00C98 /* DMA Channel 2 Y Count Register */ +#define DMA2_Y_MODIFY 0xFFC00C9C /* DMA Channel 2 Y Modify Register */ +#define DMA2_CURR_DESC_PTR 0xFFC00CA0 /* DMA Channel 2 Current Descriptor Pointer Register */ +#define DMA2_CURR_ADDR 0xFFC00CA4 /* DMA Channel 2 Current Address Register */ +#define DMA2_IRQ_STATUS 0xFFC00CA8 /* DMA Channel 2 Interrupt/Status Register */ +#define DMA2_PERIPHERAL_MAP 0xFFC00CAC /* DMA Channel 2 Peripheral Map Register */ +#define DMA2_CURR_X_COUNT 0xFFC00CB0 /* DMA Channel 2 Current X Count Register */ +#define DMA2_CURR_Y_COUNT 0xFFC00CB8 /* DMA Channel 2 Current Y Count Register */ + +#define DMA3_NEXT_DESC_PTR 0xFFC00CC0 /* DMA Channel 3 Next Descriptor Pointer Register */ +#define DMA3_START_ADDR 0xFFC00CC4 /* DMA Channel 3 Start Address Register */ +#define DMA3_CONFIG 0xFFC00CC8 /* DMA Channel 3 Configuration Register */ +#define DMA3_X_COUNT 0xFFC00CD0 /* DMA Channel 3 X Count Register */ +#define DMA3_X_MODIFY 0xFFC00CD4 /* DMA Channel 3 X Modify Register */ +#define DMA3_Y_COUNT 0xFFC00CD8 /* DMA Channel 3 Y Count Register */ +#define DMA3_Y_MODIFY 0xFFC00CDC /* DMA Channel 3 Y Modify Register */ +#define DMA3_CURR_DESC_PTR 0xFFC00CE0 /* DMA Channel 3 Current Descriptor Pointer Register */ +#define DMA3_CURR_ADDR 0xFFC00CE4 /* DMA Channel 3 Current Address Register */ +#define DMA3_IRQ_STATUS 0xFFC00CE8 /* DMA Channel 3 Interrupt/Status Register */ +#define DMA3_PERIPHERAL_MAP 0xFFC00CEC /* DMA Channel 3 Peripheral Map Register */ +#define DMA3_CURR_X_COUNT 0xFFC00CF0 /* DMA Channel 3 Current X Count Register */ +#define DMA3_CURR_Y_COUNT 0xFFC00CF8 /* DMA Channel 3 Current Y Count Register */ + +#define DMA4_NEXT_DESC_PTR 0xFFC00D00 /* DMA Channel 4 Next Descriptor Pointer Register */ +#define DMA4_START_ADDR 0xFFC00D04 /* DMA Channel 4 Start Address Register */ +#define DMA4_CONFIG 0xFFC00D08 /* DMA Channel 4 Configuration Register */ +#define DMA4_X_COUNT 0xFFC00D10 /* DMA Channel 4 X Count Register */ +#define DMA4_X_MODIFY 0xFFC00D14 /* DMA Channel 4 X Modify Register */ +#define DMA4_Y_COUNT 0xFFC00D18 /* DMA Channel 4 Y Count Register */ +#define DMA4_Y_MODIFY 0xFFC00D1C /* DMA Channel 4 Y Modify Register */ +#define DMA4_CURR_DESC_PTR 0xFFC00D20 /* DMA Channel 4 Current Descriptor Pointer Register */ +#define DMA4_CURR_ADDR 0xFFC00D24 /* DMA Channel 4 Current Address Register */ +#define DMA4_IRQ_STATUS 0xFFC00D28 /* DMA Channel 4 Interrupt/Status Register */ +#define DMA4_PERIPHERAL_MAP 0xFFC00D2C /* DMA Channel 4 Peripheral Map Register */ +#define DMA4_CURR_X_COUNT 0xFFC00D30 /* DMA Channel 4 Current X Count Register */ +#define DMA4_CURR_Y_COUNT 0xFFC00D38 /* DMA Channel 4 Current Y Count Register */ + +#define DMA5_NEXT_DESC_PTR 0xFFC00D40 /* DMA Channel 5 Next Descriptor Pointer Register */ +#define DMA5_START_ADDR 0xFFC00D44 /* DMA Channel 5 Start Address Register */ +#define DMA5_CONFIG 0xFFC00D48 /* DMA Channel 5 Configuration Register */ +#define DMA5_X_COUNT 0xFFC00D50 /* DMA Channel 5 X Count Register */ +#define DMA5_X_MODIFY 0xFFC00D54 /* DMA Channel 5 X Modify Register */ +#define DMA5_Y_COUNT 0xFFC00D58 /* DMA Channel 5 Y Count Register */ +#define DMA5_Y_MODIFY 0xFFC00D5C /* DMA Channel 5 Y Modify Register */ +#define DMA5_CURR_DESC_PTR 0xFFC00D60 /* DMA Channel 5 Current Descriptor Pointer Register */ +#define DMA5_CURR_ADDR 0xFFC00D64 /* DMA Channel 5 Current Address Register */ +#define DMA5_IRQ_STATUS 0xFFC00D68 /* DMA Channel 5 Interrupt/Status Register */ +#define DMA5_PERIPHERAL_MAP 0xFFC00D6C /* DMA Channel 5 Peripheral Map Register */ +#define DMA5_CURR_X_COUNT 0xFFC00D70 /* DMA Channel 5 Current X Count Register */ +#define DMA5_CURR_Y_COUNT 0xFFC00D78 /* DMA Channel 5 Current Y Count Register */ + +#define DMA6_NEXT_DESC_PTR 0xFFC00D80 /* DMA Channel 6 Next Descriptor Pointer Register */ +#define DMA6_START_ADDR 0xFFC00D84 /* DMA Channel 6 Start Address Register */ +#define DMA6_CONFIG 0xFFC00D88 /* DMA Channel 6 Configuration Register */ +#define DMA6_X_COUNT 0xFFC00D90 /* DMA Channel 6 X Count Register */ +#define DMA6_X_MODIFY 0xFFC00D94 /* DMA Channel 6 X Modify Register */ +#define DMA6_Y_COUNT 0xFFC00D98 /* DMA Channel 6 Y Count Register */ +#define DMA6_Y_MODIFY 0xFFC00D9C /* DMA Channel 6 Y Modify Register */ +#define DMA6_CURR_DESC_PTR 0xFFC00DA0 /* DMA Channel 6 Current Descriptor Pointer Register */ +#define DMA6_CURR_ADDR 0xFFC00DA4 /* DMA Channel 6 Current Address Register */ +#define DMA6_IRQ_STATUS 0xFFC00DA8 /* DMA Channel 6 Interrupt/Status Register */ +#define DMA6_PERIPHERAL_MAP 0xFFC00DAC /* DMA Channel 6 Peripheral Map Register */ +#define DMA6_CURR_X_COUNT 0xFFC00DB0 /* DMA Channel 6 Current X Count Register */ +#define DMA6_CURR_Y_COUNT 0xFFC00DB8 /* DMA Channel 6 Current Y Count Register */ + +#define DMA7_NEXT_DESC_PTR 0xFFC00DC0 /* DMA Channel 7 Next Descriptor Pointer Register */ +#define DMA7_START_ADDR 0xFFC00DC4 /* DMA Channel 7 Start Address Register */ +#define DMA7_CONFIG 0xFFC00DC8 /* DMA Channel 7 Configuration Register */ +#define DMA7_X_COUNT 0xFFC00DD0 /* DMA Channel 7 X Count Register */ +#define DMA7_X_MODIFY 0xFFC00DD4 /* DMA Channel 7 X Modify Register */ +#define DMA7_Y_COUNT 0xFFC00DD8 /* DMA Channel 7 Y Count Register */ +#define DMA7_Y_MODIFY 0xFFC00DDC /* DMA Channel 7 Y Modify Register */ +#define DMA7_CURR_DESC_PTR 0xFFC00DE0 /* DMA Channel 7 Current Descriptor Pointer Register */ +#define DMA7_CURR_ADDR 0xFFC00DE4 /* DMA Channel 7 Current Address Register */ +#define DMA7_IRQ_STATUS 0xFFC00DE8 /* DMA Channel 7 Interrupt/Status Register */ +#define DMA7_PERIPHERAL_MAP 0xFFC00DEC /* DMA Channel 7 Peripheral Map Register */ +#define DMA7_CURR_X_COUNT 0xFFC00DF0 /* DMA Channel 7 Current X Count Register */ +#define DMA7_CURR_Y_COUNT 0xFFC00DF8 /* DMA Channel 7 Current Y Count Register */ + +#define DMA8_NEXT_DESC_PTR 0xFFC00E00 /* DMA Channel 8 Next Descriptor Pointer Register */ +#define DMA8_START_ADDR 0xFFC00E04 /* DMA Channel 8 Start Address Register */ +#define DMA8_CONFIG 0xFFC00E08 /* DMA Channel 8 Configuration Register */ +#define DMA8_X_COUNT 0xFFC00E10 /* DMA Channel 8 X Count Register */ +#define DMA8_X_MODIFY 0xFFC00E14 /* DMA Channel 8 X Modify Register */ +#define DMA8_Y_COUNT 0xFFC00E18 /* DMA Channel 8 Y Count Register */ +#define DMA8_Y_MODIFY 0xFFC00E1C /* DMA Channel 8 Y Modify Register */ +#define DMA8_CURR_DESC_PTR 0xFFC00E20 /* DMA Channel 8 Current Descriptor Pointer Register */ +#define DMA8_CURR_ADDR 0xFFC00E24 /* DMA Channel 8 Current Address Register */ +#define DMA8_IRQ_STATUS 0xFFC00E28 /* DMA Channel 8 Interrupt/Status Register */ +#define DMA8_PERIPHERAL_MAP 0xFFC00E2C /* DMA Channel 8 Peripheral Map Register */ +#define DMA8_CURR_X_COUNT 0xFFC00E30 /* DMA Channel 8 Current X Count Register */ +#define DMA8_CURR_Y_COUNT 0xFFC00E38 /* DMA Channel 8 Current Y Count Register */ + +#define DMA9_NEXT_DESC_PTR 0xFFC00E40 /* DMA Channel 9 Next Descriptor Pointer Register */ +#define DMA9_START_ADDR 0xFFC00E44 /* DMA Channel 9 Start Address Register */ +#define DMA9_CONFIG 0xFFC00E48 /* DMA Channel 9 Configuration Register */ +#define DMA9_X_COUNT 0xFFC00E50 /* DMA Channel 9 X Count Register */ +#define DMA9_X_MODIFY 0xFFC00E54 /* DMA Channel 9 X Modify Register */ +#define DMA9_Y_COUNT 0xFFC00E58 /* DMA Channel 9 Y Count Register */ +#define DMA9_Y_MODIFY 0xFFC00E5C /* DMA Channel 9 Y Modify Register */ +#define DMA9_CURR_DESC_PTR 0xFFC00E60 /* DMA Channel 9 Current Descriptor Pointer Register */ +#define DMA9_CURR_ADDR 0xFFC00E64 /* DMA Channel 9 Current Address Register */ +#define DMA9_IRQ_STATUS 0xFFC00E68 /* DMA Channel 9 Interrupt/Status Register */ +#define DMA9_PERIPHERAL_MAP 0xFFC00E6C /* DMA Channel 9 Peripheral Map Register */ +#define DMA9_CURR_X_COUNT 0xFFC00E70 /* DMA Channel 9 Current X Count Register */ +#define DMA9_CURR_Y_COUNT 0xFFC00E78 /* DMA Channel 9 Current Y Count Register */ + +#define DMA10_NEXT_DESC_PTR 0xFFC00E80 /* DMA Channel 10 Next Descriptor Pointer Register */ +#define DMA10_START_ADDR 0xFFC00E84 /* DMA Channel 10 Start Address Register */ +#define DMA10_CONFIG 0xFFC00E88 /* DMA Channel 10 Configuration Register */ +#define DMA10_X_COUNT 0xFFC00E90 /* DMA Channel 10 X Count Register */ +#define DMA10_X_MODIFY 0xFFC00E94 /* DMA Channel 10 X Modify Register */ +#define DMA10_Y_COUNT 0xFFC00E98 /* DMA Channel 10 Y Count Register */ +#define DMA10_Y_MODIFY 0xFFC00E9C /* DMA Channel 10 Y Modify Register */ +#define DMA10_CURR_DESC_PTR 0xFFC00EA0 /* DMA Channel 10 Current Descriptor Pointer Register */ +#define DMA10_CURR_ADDR 0xFFC00EA4 /* DMA Channel 10 Current Address Register */ +#define DMA10_IRQ_STATUS 0xFFC00EA8 /* DMA Channel 10 Interrupt/Status Register */ +#define DMA10_PERIPHERAL_MAP 0xFFC00EAC /* DMA Channel 10 Peripheral Map Register */ +#define DMA10_CURR_X_COUNT 0xFFC00EB0 /* DMA Channel 10 Current X Count Register */ +#define DMA10_CURR_Y_COUNT 0xFFC00EB8 /* DMA Channel 10 Current Y Count Register */ + +#define DMA11_NEXT_DESC_PTR 0xFFC00EC0 /* DMA Channel 11 Next Descriptor Pointer Register */ +#define DMA11_START_ADDR 0xFFC00EC4 /* DMA Channel 11 Start Address Register */ +#define DMA11_CONFIG 0xFFC00EC8 /* DMA Channel 11 Configuration Register */ +#define DMA11_X_COUNT 0xFFC00ED0 /* DMA Channel 11 X Count Register */ +#define DMA11_X_MODIFY 0xFFC00ED4 /* DMA Channel 11 X Modify Register */ +#define DMA11_Y_COUNT 0xFFC00ED8 /* DMA Channel 11 Y Count Register */ +#define DMA11_Y_MODIFY 0xFFC00EDC /* DMA Channel 11 Y Modify Register */ +#define DMA11_CURR_DESC_PTR 0xFFC00EE0 /* DMA Channel 11 Current Descriptor Pointer Register */ +#define DMA11_CURR_ADDR 0xFFC00EE4 /* DMA Channel 11 Current Address Register */ +#define DMA11_IRQ_STATUS 0xFFC00EE8 /* DMA Channel 11 Interrupt/Status Register */ +#define DMA11_PERIPHERAL_MAP 0xFFC00EEC /* DMA Channel 11 Peripheral Map Register */ +#define DMA11_CURR_X_COUNT 0xFFC00EF0 /* DMA Channel 11 Current X Count Register */ +#define DMA11_CURR_Y_COUNT 0xFFC00EF8 /* DMA Channel 11 Current Y Count Register */ + +#define MDMA_D0_NEXT_DESC_PTR 0xFFC00F00 /* MemDMA Stream 0 Destination Next Descriptor Pointer Register */ +#define MDMA_D0_START_ADDR 0xFFC00F04 /* MemDMA Stream 0 Destination Start Address Register */ +#define MDMA_D0_CONFIG 0xFFC00F08 /* MemDMA Stream 0 Destination Configuration Register */ +#define MDMA_D0_X_COUNT 0xFFC00F10 /* MemDMA Stream 0 Destination X Count Register */ +#define MDMA_D0_X_MODIFY 0xFFC00F14 /* MemDMA Stream 0 Destination X Modify Register */ +#define MDMA_D0_Y_COUNT 0xFFC00F18 /* MemDMA Stream 0 Destination Y Count Register */ +#define MDMA_D0_Y_MODIFY 0xFFC00F1C /* MemDMA Stream 0 Destination Y Modify Register */ +#define MDMA_D0_CURR_DESC_PTR 0xFFC00F20 /* MemDMA Stream 0 Destination Current Descriptor Pointer Register */ +#define MDMA_D0_CURR_ADDR 0xFFC00F24 /* MemDMA Stream 0 Destination Current Address Register */ +#define MDMA_D0_IRQ_STATUS 0xFFC00F28 /* MemDMA Stream 0 Destination Interrupt/Status Register */ +#define MDMA_D0_PERIPHERAL_MAP 0xFFC00F2C /* MemDMA Stream 0 Destination Peripheral Map Register */ +#define MDMA_D0_CURR_X_COUNT 0xFFC00F30 /* MemDMA Stream 0 Destination Current X Count Register */ +#define MDMA_D0_CURR_Y_COUNT 0xFFC00F38 /* MemDMA Stream 0 Destination Current Y Count Register */ + +#define MDMA_S0_NEXT_DESC_PTR 0xFFC00F40 /* MemDMA Stream 0 Source Next Descriptor Pointer Register */ +#define MDMA_S0_START_ADDR 0xFFC00F44 /* MemDMA Stream 0 Source Start Address Register */ +#define MDMA_S0_CONFIG 0xFFC00F48 /* MemDMA Stream 0 Source Configuration Register */ +#define MDMA_S0_X_COUNT 0xFFC00F50 /* MemDMA Stream 0 Source X Count Register */ +#define MDMA_S0_X_MODIFY 0xFFC00F54 /* MemDMA Stream 0 Source X Modify Register */ +#define MDMA_S0_Y_COUNT 0xFFC00F58 /* MemDMA Stream 0 Source Y Count Register */ +#define MDMA_S0_Y_MODIFY 0xFFC00F5C /* MemDMA Stream 0 Source Y Modify Register */ +#define MDMA_S0_CURR_DESC_PTR 0xFFC00F60 /* MemDMA Stream 0 Source Current Descriptor Pointer Register */ +#define MDMA_S0_CURR_ADDR 0xFFC00F64 /* MemDMA Stream 0 Source Current Address Register */ +#define MDMA_S0_IRQ_STATUS 0xFFC00F68 /* MemDMA Stream 0 Source Interrupt/Status Register */ +#define MDMA_S0_PERIPHERAL_MAP 0xFFC00F6C /* MemDMA Stream 0 Source Peripheral Map Register */ +#define MDMA_S0_CURR_X_COUNT 0xFFC00F70 /* MemDMA Stream 0 Source Current X Count Register */ +#define MDMA_S0_CURR_Y_COUNT 0xFFC00F78 /* MemDMA Stream 0 Source Current Y Count Register */ + +#define MDMA_D1_NEXT_DESC_PTR 0xFFC00F80 /* MemDMA Stream 1 Destination Next Descriptor Pointer Register */ +#define MDMA_D1_START_ADDR 0xFFC00F84 /* MemDMA Stream 1 Destination Start Address Register */ +#define MDMA_D1_CONFIG 0xFFC00F88 /* MemDMA Stream 1 Destination Configuration Register */ +#define MDMA_D1_X_COUNT 0xFFC00F90 /* MemDMA Stream 1 Destination X Count Register */ +#define MDMA_D1_X_MODIFY 0xFFC00F94 /* MemDMA Stream 1 Destination X Modify Register */ +#define MDMA_D1_Y_COUNT 0xFFC00F98 /* MemDMA Stream 1 Destination Y Count Register */ +#define MDMA_D1_Y_MODIFY 0xFFC00F9C /* MemDMA Stream 1 Destination Y Modify Register */ +#define MDMA_D1_CURR_DESC_PTR 0xFFC00FA0 /* MemDMA Stream 1 Destination Current Descriptor Pointer Register */ +#define MDMA_D1_CURR_ADDR 0xFFC00FA4 /* MemDMA Stream 1 Destination Current Address Register */ +#define MDMA_D1_IRQ_STATUS 0xFFC00FA8 /* MemDMA Stream 1 Destination Interrupt/Status Register */ +#define MDMA_D1_PERIPHERAL_MAP 0xFFC00FAC /* MemDMA Stream 1 Destination Peripheral Map Register */ +#define MDMA_D1_CURR_X_COUNT 0xFFC00FB0 /* MemDMA Stream 1 Destination Current X Count Register */ +#define MDMA_D1_CURR_Y_COUNT 0xFFC00FB8 /* MemDMA Stream 1 Destination Current Y Count Register */ + +#define MDMA_S1_NEXT_DESC_PTR 0xFFC00FC0 /* MemDMA Stream 1 Source Next Descriptor Pointer Register */ +#define MDMA_S1_START_ADDR 0xFFC00FC4 /* MemDMA Stream 1 Source Start Address Register */ +#define MDMA_S1_CONFIG 0xFFC00FC8 /* MemDMA Stream 1 Source Configuration Register */ +#define MDMA_S1_X_COUNT 0xFFC00FD0 /* MemDMA Stream 1 Source X Count Register */ +#define MDMA_S1_X_MODIFY 0xFFC00FD4 /* MemDMA Stream 1 Source X Modify Register */ +#define MDMA_S1_Y_COUNT 0xFFC00FD8 /* MemDMA Stream 1 Source Y Count Register */ +#define MDMA_S1_Y_MODIFY 0xFFC00FDC /* MemDMA Stream 1 Source Y Modify Register */ +#define MDMA_S1_CURR_DESC_PTR 0xFFC00FE0 /* MemDMA Stream 1 Source Current Descriptor Pointer Register */ +#define MDMA_S1_CURR_ADDR 0xFFC00FE4 /* MemDMA Stream 1 Source Current Address Register */ +#define MDMA_S1_IRQ_STATUS 0xFFC00FE8 /* MemDMA Stream 1 Source Interrupt/Status Register */ +#define MDMA_S1_PERIPHERAL_MAP 0xFFC00FEC /* MemDMA Stream 1 Source Peripheral Map Register */ +#define MDMA_S1_CURR_X_COUNT 0xFFC00FF0 /* MemDMA Stream 1 Source Current X Count Register */ +#define MDMA_S1_CURR_Y_COUNT 0xFFC00FF8 /* MemDMA Stream 1 Source Current Y Count Register */ + + +/* Parallel Peripheral Interface (0xFFC01000 - 0xFFC010FF) */ +#define PPI_CONTROL 0xFFC01000 /* PPI Control Register */ +#define PPI_STATUS 0xFFC01004 /* PPI Status Register */ +#define PPI_COUNT 0xFFC01008 /* PPI Transfer Count Register */ +#define PPI_DELAY 0xFFC0100C /* PPI Delay Count Register */ +#define PPI_FRAME 0xFFC01010 /* PPI Frame Length Register */ + + +/* Two-Wire Interface (0xFFC01400 - 0xFFC014FF) */ +#define TWI_CLKDIV 0xFFC01400 /* Serial Clock Divider Register */ +#define TWI_CONTROL 0xFFC01404 /* TWI Control Register */ +#define TWI_SLAVE_CTL 0xFFC01408 /* Slave Mode Control Register */ +#define TWI_SLAVE_STAT 0xFFC0140C /* Slave Mode Status Register */ +#define TWI_SLAVE_ADDR 0xFFC01410 /* Slave Mode Address Register */ +#define TWI_MASTER_CTL 0xFFC01414 /* Master Mode Control Register */ +#define TWI_MASTER_STAT 0xFFC01418 /* Master Mode Status Register */ +#define TWI_MASTER_ADDR 0xFFC0141C /* Master Mode Address Register */ +#define TWI_INT_STAT 0xFFC01420 /* TWI Interrupt Status Register */ +#define TWI_INT_MASK 0xFFC01424 /* TWI Master Interrupt Mask Register */ +#define TWI_FIFO_CTL 0xFFC01428 /* FIFO Control Register */ +#define TWI_FIFO_STAT 0xFFC0142C /* FIFO Status Register */ +#define TWI_XMT_DATA8 0xFFC01480 /* FIFO Transmit Data Single Byte Register */ +#define TWI_XMT_DATA16 0xFFC01484 /* FIFO Transmit Data Double Byte Register */ +#define TWI_RCV_DATA8 0xFFC01488 /* FIFO Receive Data Single Byte Register */ +#define TWI_RCV_DATA16 0xFFC0148C /* FIFO Receive Data Double Byte Register */ + + +/* General Purpose I/O Port G (0xFFC01500 - 0xFFC015FF) */ +#define PORTGIO 0xFFC01500 /* Port G I/O Pin State Specify Register */ +#define PORTGIO_CLEAR 0xFFC01504 /* Port G I/O Peripheral Interrupt Clear Register */ +#define PORTGIO_SET 0xFFC01508 /* Port G I/O Peripheral Interrupt Set Register */ +#define PORTGIO_TOGGLE 0xFFC0150C /* Port G I/O Pin State Toggle Register */ +#define PORTGIO_MASKA 0xFFC01510 /* Port G I/O Mask State Specify Interrupt A Register */ +#define PORTGIO_MASKA_CLEAR 0xFFC01514 /* Port G I/O Mask Disable Interrupt A Register */ +#define PORTGIO_MASKA_SET 0xFFC01518 /* Port G I/O Mask Enable Interrupt A Register */ +#define PORTGIO_MASKA_TOGGLE 0xFFC0151C /* Port G I/O Mask Toggle Enable Interrupt A Register */ +#define PORTGIO_MASKB 0xFFC01520 /* Port G I/O Mask State Specify Interrupt B Register */ +#define PORTGIO_MASKB_CLEAR 0xFFC01524 /* Port G I/O Mask Disable Interrupt B Register */ +#define PORTGIO_MASKB_SET 0xFFC01528 /* Port G I/O Mask Enable Interrupt B Register */ +#define PORTGIO_MASKB_TOGGLE 0xFFC0152C /* Port G I/O Mask Toggle Enable Interrupt B Register */ +#define PORTGIO_DIR 0xFFC01530 /* Port G I/O Direction Register */ +#define PORTGIO_POLAR 0xFFC01534 /* Port G I/O Source Polarity Register */ +#define PORTGIO_EDGE 0xFFC01538 /* Port G I/O Source Sensitivity Register */ +#define PORTGIO_BOTH 0xFFC0153C /* Port G I/O Set on BOTH Edges Register */ +#define PORTGIO_INEN 0xFFC01540 /* Port G I/O Input Enable Register */ + + +/* General Purpose I/O Port H (0xFFC01700 - 0xFFC017FF) */ +#define PORTHIO 0xFFC01700 /* Port H I/O Pin State Specify Register */ +#define PORTHIO_CLEAR 0xFFC01704 /* Port H I/O Peripheral Interrupt Clear Register */ +#define PORTHIO_SET 0xFFC01708 /* Port H I/O Peripheral Interrupt Set Register */ +#define PORTHIO_TOGGLE 0xFFC0170C /* Port H I/O Pin State Toggle Register */ +#define PORTHIO_MASKA 0xFFC01710 /* Port H I/O Mask State Specify Interrupt A Register */ +#define PORTHIO_MASKA_CLEAR 0xFFC01714 /* Port H I/O Mask Disable Interrupt A Register */ +#define PORTHIO_MASKA_SET 0xFFC01718 /* Port H I/O Mask Enable Interrupt A Register */ +#define PORTHIO_MASKA_TOGGLE 0xFFC0171C /* Port H I/O Mask Toggle Enable Interrupt A Register */ +#define PORTHIO_MASKB 0xFFC01720 /* Port H I/O Mask State Specify Interrupt B Register */ +#define PORTHIO_MASKB_CLEAR 0xFFC01724 /* Port H I/O Mask Disable Interrupt B Register */ +#define PORTHIO_MASKB_SET 0xFFC01728 /* Port H I/O Mask Enable Interrupt B Register */ +#define PORTHIO_MASKB_TOGGLE 0xFFC0172C /* Port H I/O Mask Toggle Enable Interrupt B Register */ +#define PORTHIO_DIR 0xFFC01730 /* Port H I/O Direction Register */ +#define PORTHIO_POLAR 0xFFC01734 /* Port H I/O Source Polarity Register */ +#define PORTHIO_EDGE 0xFFC01738 /* Port H I/O Source Sensitivity Register */ +#define PORTHIO_BOTH 0xFFC0173C /* Port H I/O Set on BOTH Edges Register */ +#define PORTHIO_INEN 0xFFC01740 /* Port H I/O Input Enable Register */ + + +/* UART1 Controller (0xFFC02000 - 0xFFC020FF) */ +#define UART1_THR 0xFFC02000 /* Transmit Holding register */ +#define UART1_RBR 0xFFC02000 /* Receive Buffer register */ +#define UART1_DLL 0xFFC02000 /* Divisor Latch (Low-Byte) */ +#define UART1_IER 0xFFC02004 /* Interrupt Enable Register */ +#define UART1_DLH 0xFFC02004 /* Divisor Latch (High-Byte) */ +#define UART1_IIR 0xFFC02008 /* Interrupt Identification Register */ +#define UART1_LCR 0xFFC0200C /* Line Control Register */ +#define UART1_MCR 0xFFC02010 /* Modem Control Register */ +#define UART1_LSR 0xFFC02014 /* Line Status Register */ +#define UART1_MSR 0xFFC02018 /* Modem Status Register */ +#define UART1_SCR 0xFFC0201C /* SCR Scratch Register */ +#define UART1_GCTL 0xFFC02024 /* Global Control Register */ + + +/* Omit CAN register sets from the defBF534.h (CAN is not in the ADSP-BF52x processor) */ + +/* Pin Control Registers (0xFFC03200 - 0xFFC032FF) */ +#define PORTF_FER 0xFFC03200 /* Port F Function Enable Register (Alternate/Flag*) */ +#define PORTG_FER 0xFFC03204 /* Port G Function Enable Register (Alternate/Flag*) */ +#define PORTH_FER 0xFFC03208 /* Port H Function Enable Register (Alternate/Flag*) */ +#define BFIN_PORT_MUX 0xFFC0320C /* Port Multiplexer Control Register */ + + +/* Handshake MDMA Registers (0xFFC03300 - 0xFFC033FF) */ +#define HMDMA0_CONTROL 0xFFC03300 /* Handshake MDMA0 Control Register */ +#define HMDMA0_ECINIT 0xFFC03304 /* HMDMA0 Initial Edge Count Register */ +#define HMDMA0_BCINIT 0xFFC03308 /* HMDMA0 Initial Block Count Register */ +#define HMDMA0_ECURGENT 0xFFC0330C /* HMDMA0 Urgent Edge Count Threshhold Register */ +#define HMDMA0_ECOVERFLOW 0xFFC03310 /* HMDMA0 Edge Count Overflow Interrupt Register */ +#define HMDMA0_ECOUNT 0xFFC03314 /* HMDMA0 Current Edge Count Register */ +#define HMDMA0_BCOUNT 0xFFC03318 /* HMDMA0 Current Block Count Register */ + +#define HMDMA1_CONTROL 0xFFC03340 /* Handshake MDMA1 Control Register */ +#define HMDMA1_ECINIT 0xFFC03344 /* HMDMA1 Initial Edge Count Register */ +#define HMDMA1_BCINIT 0xFFC03348 /* HMDMA1 Initial Block Count Register */ +#define HMDMA1_ECURGENT 0xFFC0334C /* HMDMA1 Urgent Edge Count Threshhold Register */ +#define HMDMA1_ECOVERFLOW 0xFFC03350 /* HMDMA1 Edge Count Overflow Interrupt Register */ +#define HMDMA1_ECOUNT 0xFFC03354 /* HMDMA1 Current Edge Count Register */ +#define HMDMA1_BCOUNT 0xFFC03358 /* HMDMA1 Current Block Count Register */ + +/* GPIO PIN mux (0xFFC03210 - OxFFC03288) */ +#define PORTF_MUX 0xFFC03210 /* Port F mux control */ +#define PORTG_MUX 0xFFC03214 /* Port G mux control */ +#define PORTH_MUX 0xFFC03218 /* Port H mux control */ +#define PORTF_DRIVE 0xFFC03220 /* Port F drive strength control */ +#define PORTG_DRIVE 0xFFC03224 /* Port G drive strength control */ +#define PORTH_DRIVE 0xFFC03228 /* Port H drive strength control */ +#define PORTF_SLEW 0xFFC03230 /* Port F slew control */ +#define PORTG_SLEW 0xFFC03234 /* Port G slew control */ +#define PORTH_SLEW 0xFFC03238 /* Port H slew control */ +#define PORTF_HYSTERISIS 0xFFC03240 /* Port F Schmitt trigger control */ +#define PORTG_HYSTERISIS 0xFFC03244 /* Port G Schmitt trigger control */ +#define PORTH_HYSTERISIS 0xFFC03248 /* Port H Schmitt trigger control */ +#define MISCPORT_DRIVE 0xFFC03280 /* Misc Port drive strength control */ +#define MISCPORT_SLEW 0xFFC03284 /* Misc Port slew control */ +#define MISCPORT_HYSTERISIS 0xFFC03288 /* Misc Port Schmitt trigger control */ + + +/*********************************************************************************** +** System MMR Register Bits And Macros +** +** Disclaimer: All macros are intended to make C and Assembly code more readable. +** Use these macros carefully, as any that do left shifts for field +** depositing will result in the lower order bits being destroyed. Any +** macro that shifts left to properly position the bit-field should be +** used as part of an OR to initialize a register and NOT as a dynamic +** modifier UNLESS the lower order bits are saved and ORed back in when +** the macro is used. +*************************************************************************************/ +/* +** ********************* PLL AND RESET MASKS ****************************************/ +/* PLL_CTL Masks */ +#define DF 0x0001 /* 0: PLL = CLKIN, 1: PLL = CLKIN/2 */ +#define PLL_OFF 0x0002 /* PLL Not Powered */ +#define STOPCK 0x0008 /* Core Clock Off */ +#define PDWN 0x0020 /* Enter Deep Sleep Mode */ +#define IN_DELAY 0x0040 /* Add 200ps Delay To EBIU Input Latches */ +#define OUT_DELAY 0x0080 /* Add 200ps Delay To EBIU Output Signals */ +#define BYPASS 0x0100 /* Bypass the PLL */ +#define MSEL 0x7E00 /* Multiplier Select For CCLK/VCO Factors */ +/* PLL_CTL Macros (Only Use With Logic OR While Setting Lower Order Bits) */ +#define SET_MSEL(x) (((x)&0x3F) << 0x9) /* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */ + +/* PLL_DIV Masks */ +#define SSEL 0x000F /* System Select */ +#define CSEL 0x0030 /* Core Select */ +#define CSEL_DIV1 0x0000 /* CCLK = VCO / 1 */ +#define CSEL_DIV2 0x0010 /* CCLK = VCO / 2 */ +#define CSEL_DIV4 0x0020 /* CCLK = VCO / 4 */ +#define CSEL_DIV8 0x0030 /* CCLK = VCO / 8 */ +/* PLL_DIV Macros */ +#define SET_SSEL(x) ((x)&0xF) /* Set SSEL = 0-15 --> SCLK = VCO/SSEL */ + +/* VR_CTL Masks */ +#define FREQ 0x0003 /* Switching Oscillator Frequency For Regulator */ +#define HIBERNATE 0x0000 /* Powerdown/Bypass On-Board Regulation */ +#define FREQ_333 0x0001 /* Switching Frequency Is 333 kHz */ +#define FREQ_667 0x0002 /* Switching Frequency Is 667 kHz */ +#define FREQ_1000 0x0003 /* Switching Frequency Is 1 MHz */ + +#define GAIN 0x000C /* Voltage Level Gain */ +#define GAIN_5 0x0000 /* GAIN = 5 */ +#define GAIN_10 0x0004 /* GAIN = 10 */ +#define GAIN_20 0x0008 /* GAIN = 20 */ +#define GAIN_50 0x000C /* GAIN = 50 */ + +#define VLEV 0x00F0 /* Internal Voltage Level */ +#define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */ +#define VLEV_090 0x0070 /* VLEV = 0.90 V (-5% - +10% Accuracy) */ +#define VLEV_095 0x0080 /* VLEV = 0.95 V (-5% - +10% Accuracy) */ +#define VLEV_100 0x0090 /* VLEV = 1.00 V (-5% - +10% Accuracy) */ +#define VLEV_105 0x00A0 /* VLEV = 1.05 V (-5% - +10% Accuracy) */ +#define VLEV_110 0x00B0 /* VLEV = 1.10 V (-5% - +10% Accuracy) */ +#define VLEV_115 0x00C0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */ +#define VLEV_120 0x00D0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */ +#define VLEV_125 0x00E0 /* VLEV = 1.25 V (-5% - +10% Accuracy) */ +#define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */ + +#define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */ +#define CANWE 0x0200 /* Enable CAN Wakeup From Hibernate */ +#define PHYWE 0x0400 /* Enable PHY Wakeup From Hibernate */ +#define CLKBUFOE 0x4000 /* CLKIN Buffer Output Enable */ +#define PHYCLKOE CLKBUFOE /* Alternative legacy name for the above */ +#define SCKELOW 0x8000 /* Enable Drive CKE Low During Reset */ + +/* PLL_STAT Masks */ +#define ACTIVE_PLLENABLED 0x0001 /* Processor In Active Mode With PLL Enabled */ +#define FULL_ON 0x0002 /* Processor In Full On Mode */ +#define ACTIVE_PLLDISABLED 0x0004 /* Processor In Active Mode With PLL Disabled */ +#define PLL_LOCKED 0x0020 /* PLL_LOCKCNT Has Been Reached */ + +/* CHIPID Masks */ +#define CHIPID_VERSION 0xF0000000 +#define CHIPID_FAMILY 0x0FFFF000 +#define CHIPID_MANUFACTURE 0x00000FFE + +/* SWRST Masks */ +#define SYSTEM_RESET 0x0007 /* Initiates A System Software Reset */ +#define DOUBLE_FAULT 0x0008 /* Core Double Fault Causes Reset */ +#define RESET_DOUBLE 0x2000 /* SW Reset Generated By Core Double-Fault */ +#define RESET_WDOG 0x4000 /* SW Reset Generated By Watchdog Timer */ +#define RESET_SOFTWARE 0x8000 /* SW Reset Occurred Since Last Read Of SWRST */ + +/* SYSCR Masks */ +#define BMODE 0x0007 /* Boot Mode - Latched During HW Reset From Mode Pins */ +#define NOBOOT 0x0010 /* Execute From L1 or ASYNC Bank 0 When BMODE = 0 */ + + +/* ************* SYSTEM INTERRUPT CONTROLLER MASKS *************************************/ +/* Peripheral Masks For SIC_ISR, SIC_IWR, SIC_IMASK */ +#define IRQ_PLL_WAKEUP 0x00000001 /* PLL Wakeup Interrupt */ + +#define IRQ_ERROR1 0x00000002 /* Error Interrupt (DMA, DMARx Block, DMARx Overflow) */ +#define IRQ_ERROR2 0x00000004 /* Error Interrupt (CAN, Ethernet, SPORTx, PPI, SPI, UARTx) */ +#define IRQ_RTC 0x00000008 /* Real Time Clock Interrupt */ +#define IRQ_DMA0 0x00000010 /* DMA Channel 0 (PPI) Interrupt */ +#define IRQ_DMA3 0x00000020 /* DMA Channel 3 (SPORT0 RX) Interrupt */ +#define IRQ_DMA4 0x00000040 /* DMA Channel 4 (SPORT0 TX) Interrupt */ +#define IRQ_DMA5 0x00000080 /* DMA Channel 5 (SPORT1 RX) Interrupt */ + +#define IRQ_DMA6 0x00000100 /* DMA Channel 6 (SPORT1 TX) Interrupt */ +#define IRQ_TWI 0x00000200 /* TWI Interrupt */ +#define IRQ_DMA7 0x00000400 /* DMA Channel 7 (SPI) Interrupt */ +#define IRQ_DMA8 0x00000800 /* DMA Channel 8 (UART0 RX) Interrupt */ +#define IRQ_DMA9 0x00001000 /* DMA Channel 9 (UART0 TX) Interrupt */ +#define IRQ_DMA10 0x00002000 /* DMA Channel 10 (UART1 RX) Interrupt */ +#define IRQ_DMA11 0x00004000 /* DMA Channel 11 (UART1 TX) Interrupt */ +#define IRQ_CAN_RX 0x00008000 /* CAN Receive Interrupt */ + +#define IRQ_CAN_TX 0x00010000 /* CAN Transmit Interrupt */ +#define IRQ_DMA1 0x00020000 /* DMA Channel 1 (Ethernet RX) Interrupt */ +#define IRQ_PFA_PORTH 0x00020000 /* PF Port H (PF47:32) Interrupt A */ +#define IRQ_DMA2 0x00040000 /* DMA Channel 2 (Ethernet TX) Interrupt */ +#define IRQ_PFB_PORTH 0x00040000 /* PF Port H (PF47:32) Interrupt B */ +#define IRQ_TIMER0 0x00080000 /* Timer 0 Interrupt */ +#define IRQ_TIMER1 0x00100000 /* Timer 1 Interrupt */ +#define IRQ_TIMER2 0x00200000 /* Timer 2 Interrupt */ +#define IRQ_TIMER3 0x00400000 /* Timer 3 Interrupt */ +#define IRQ_TIMER4 0x00800000 /* Timer 4 Interrupt */ + +#define IRQ_TIMER5 0x01000000 /* Timer 5 Interrupt */ +#define IRQ_TIMER6 0x02000000 /* Timer 6 Interrupt */ +#define IRQ_TIMER7 0x04000000 /* Timer 7 Interrupt */ +#define IRQ_PFA_PORTFG 0x08000000 /* PF Ports F&G (PF31:0) Interrupt A */ +#define IRQ_PFB_PORTF 0x80000000 /* PF Port F (PF15:0) Interrupt B */ +#define IRQ_DMA12 0x20000000 /* DMA Channels 12 (MDMA1 Source) RX Interrupt */ +#define IRQ_DMA13 0x20000000 /* DMA Channels 13 (MDMA1 Destination) TX Interrupt */ +#define IRQ_DMA14 0x40000000 /* DMA Channels 14 (MDMA0 Source) RX Interrupt */ +#define IRQ_DMA15 0x40000000 /* DMA Channels 15 (MDMA0 Destination) TX Interrupt */ +#define IRQ_WDOG 0x80000000 /* Software Watchdog Timer Interrupt */ +#define IRQ_PFB_PORTG 0x10000000 /* PF Port G (PF31:16) Interrupt B */ + +/* SIC_IAR0 Macros */ +#define P0_IVG(x) (((x)&0xF)-7) /* Peripheral #0 assigned IVG #x */ +#define P1_IVG(x) (((x)&0xF)-7) << 0x4 /* Peripheral #1 assigned IVG #x */ +#define P2_IVG(x) (((x)&0xF)-7) << 0x8 /* Peripheral #2 assigned IVG #x */ +#define P3_IVG(x) (((x)&0xF)-7) << 0xC /* Peripheral #3 assigned IVG #x */ +#define P4_IVG(x) (((x)&0xF)-7) << 0x10 /* Peripheral #4 assigned IVG #x */ +#define P5_IVG(x) (((x)&0xF)-7) << 0x14 /* Peripheral #5 assigned IVG #x */ +#define P6_IVG(x) (((x)&0xF)-7) << 0x18 /* Peripheral #6 assigned IVG #x */ +#define P7_IVG(x) (((x)&0xF)-7) << 0x1C /* Peripheral #7 assigned IVG #x */ + +/* SIC_IAR1 Macros */ +#define P8_IVG(x) (((x)&0xF)-7) /* Peripheral #8 assigned IVG #x */ +#define P9_IVG(x) (((x)&0xF)-7) << 0x4 /* Peripheral #9 assigned IVG #x */ +#define P10_IVG(x) (((x)&0xF)-7) << 0x8 /* Peripheral #10 assigned IVG #x */ +#define P11_IVG(x) (((x)&0xF)-7) << 0xC /* Peripheral #11 assigned IVG #x */ +#define P12_IVG(x) (((x)&0xF)-7) << 0x10 /* Peripheral #12 assigned IVG #x */ +#define P13_IVG(x) (((x)&0xF)-7) << 0x14 /* Peripheral #13 assigned IVG #x */ +#define P14_IVG(x) (((x)&0xF)-7) << 0x18 /* Peripheral #14 assigned IVG #x */ +#define P15_IVG(x) (((x)&0xF)-7) << 0x1C /* Peripheral #15 assigned IVG #x */ + +/* SIC_IAR2 Macros */ +#define P16_IVG(x) (((x)&0xF)-7) /* Peripheral #16 assigned IVG #x */ +#define P17_IVG(x) (((x)&0xF)-7) << 0x4 /* Peripheral #17 assigned IVG #x */ +#define P18_IVG(x) (((x)&0xF)-7) << 0x8 /* Peripheral #18 assigned IVG #x */ +#define P19_IVG(x) (((x)&0xF)-7) << 0xC /* Peripheral #19 assigned IVG #x */ +#define P20_IVG(x) (((x)&0xF)-7) << 0x10 /* Peripheral #20 assigned IVG #x */ +#define P21_IVG(x) (((x)&0xF)-7) << 0x14 /* Peripheral #21 assigned IVG #x */ +#define P22_IVG(x) (((x)&0xF)-7) << 0x18 /* Peripheral #22 assigned IVG #x */ +#define P23_IVG(x) (((x)&0xF)-7) << 0x1C /* Peripheral #23 assigned IVG #x */ + +/* SIC_IAR3 Macros */ +#define P24_IVG(x) (((x)&0xF)-7) /* Peripheral #24 assigned IVG #x */ +#define P25_IVG(x) (((x)&0xF)-7) << 0x4 /* Peripheral #25 assigned IVG #x */ +#define P26_IVG(x) (((x)&0xF)-7) << 0x8 /* Peripheral #26 assigned IVG #x */ +#define P27_IVG(x) (((x)&0xF)-7) << 0xC /* Peripheral #27 assigned IVG #x */ +#define P28_IVG(x) (((x)&0xF)-7) << 0x10 /* Peripheral #28 assigned IVG #x */ +#define P29_IVG(x) (((x)&0xF)-7) << 0x14 /* Peripheral #29 assigned IVG #x */ +#define P30_IVG(x) (((x)&0xF)-7) << 0x18 /* Peripheral #30 assigned IVG #x */ +#define P31_IVG(x) (((x)&0xF)-7) << 0x1C /* Peripheral #31 assigned IVG #x */ + + +/* SIC_IMASK Masks */ +#define SIC_UNMASK_ALL 0x00000000 /* Unmask all peripheral interrupts */ +#define SIC_MASK_ALL 0xFFFFFFFF /* Mask all peripheral interrupts */ +#define SIC_MASK(x) (1 << ((x)&0x1F)) /* Mask Peripheral #x interrupt */ +#define SIC_UNMASK(x) (0xFFFFFFFF ^ (1 << ((x)&0x1F))) /* Unmask Peripheral #x interrupt */ + +/* SIC_IWR Masks */ +#define IWR_DISABLE_ALL 0x00000000 /* Wakeup Disable all peripherals */ +#define IWR_ENABLE_ALL 0xFFFFFFFF /* Wakeup Enable all peripherals */ +#define IWR_ENABLE(x) (1 << ((x)&0x1F)) /* Wakeup Enable Peripheral #x */ +#define IWR_DISABLE(x) (0xFFFFFFFF ^ (1 << ((x)&0x1F))) /* Wakeup Disable Peripheral #x */ + + +/* ********* WATCHDOG TIMER MASKS ******************** */ + +/* Watchdog Timer WDOG_CTL Register Masks */ + +#define WDEV(x) (((x)<<1) & 0x0006) /* event generated on roll over */ +#define WDEV_RESET 0x0000 /* generate reset event on roll over */ +#define WDEV_NMI 0x0002 /* generate NMI event on roll over */ +#define WDEV_GPI 0x0004 /* generate GP IRQ on roll over */ +#define WDEV_NONE 0x0006 /* no event on roll over */ +#define WDEN 0x0FF0 /* enable watchdog */ +#define WDDIS 0x0AD0 /* disable watchdog */ +#define WDRO 0x8000 /* watchdog rolled over latch */ + +/* depreciated WDOG_CTL Register Masks for legacy code */ + + +#define ICTL WDEV +#define ENABLE_RESET WDEV_RESET +#define WDOG_RESET WDEV_RESET +#define ENABLE_NMI WDEV_NMI +#define WDOG_NMI WDEV_NMI +#define ENABLE_GPI WDEV_GPI +#define WDOG_GPI WDEV_GPI +#define DISABLE_EVT WDEV_NONE +#define WDOG_NONE WDEV_NONE + +#define TMR_EN WDEN +#define TMR_DIS WDDIS +#define TRO WDRO +#define ICTL_P0 0x01 + #define ICTL_P1 0x02 +#define TRO_P 0x0F + + + +/* *************** REAL TIME CLOCK MASKS **************************/ +/* RTC_STAT and RTC_ALARM Masks */ +#define RTC_SEC 0x0000003F /* Real-Time Clock Seconds */ +#define RTC_MIN 0x00000FC0 /* Real-Time Clock Minutes */ +#define RTC_HR 0x0001F000 /* Real-Time Clock Hours */ +#define RTC_DAY 0xFFFE0000 /* Real-Time Clock Days */ + +/* RTC_ALARM Macro z=day y=hr x=min w=sec */ +#define SET_ALARM(z,y,x,w) ((((z)&0x7FFF)<<0x11)|(((y)&0x1F)<<0xC)|(((x)&0x3F)<<0x6)|((w)&0x3F)) + +/* RTC_ICTL and RTC_ISTAT Masks */ +#define STOPWATCH 0x0001 /* Stopwatch Interrupt Enable */ +#define ALARM 0x0002 /* Alarm Interrupt Enable */ +#define SECOND 0x0004 /* Seconds (1 Hz) Interrupt Enable */ +#define MINUTE 0x0008 /* Minutes Interrupt Enable */ +#define HOUR 0x0010 /* Hours Interrupt Enable */ +#define DAY 0x0020 /* 24 Hours (Days) Interrupt Enable */ +#define DAY_ALARM 0x0040 /* Day Alarm (Day, Hour, Minute, Second) Interrupt Enable */ +#define WRITE_PENDING 0x4000 /* Write Pending Status */ +#define WRITE_COMPLETE 0x8000 /* Write Complete Interrupt Enable */ + +/* RTC_FAST / RTC_PREN Mask */ +#define PREN 0x0001 /* Enable Prescaler, RTC Runs @1 Hz */ + + +/* ************** UART CONTROLLER MASKS *************************/ +/* UARTx_LCR Masks */ +#define WLS(x) (((x)-5) & 0x03) /* Word Length Select */ +#define STB 0x04 /* Stop Bits */ +#define PEN 0x08 /* Parity Enable */ +#define EPS 0x10 /* Even Parity Select */ +#define STP 0x20 /* Stick Parity */ +#define SB 0x40 /* Set Break */ +#define DLAB 0x80 /* Divisor Latch Access */ + +/* UARTx_MCR Mask */ +#define LOOP_ENA 0x10 /* Loopback Mode Enable */ +#define LOOP_ENA_P 0x04 + +/* UARTx_LSR Masks */ +#define DR 0x01 /* Data Ready */ +#define OE 0x02 /* Overrun Error */ +#define PE 0x04 /* Parity Error */ +#define FE 0x08 /* Framing Error */ +#define BI 0x10 /* Break Interrupt */ +#define THRE 0x20 /* THR Empty */ +#define TEMT 0x40 /* TSR and UART_THR Empty */ + +/* UARTx_IER Masks */ +#define ERBFI 0x01 /* Enable Receive Buffer Full Interrupt */ +#define ETBEI 0x02 /* Enable Transmit Buffer Empty Interrupt */ +#define ELSI 0x04 /* Enable RX Status Interrupt */ + +/* UARTx_IIR Masks */ +#define NINT 0x01 /* Pending Interrupt */ +#define IIR_TX_READY 0x02 /* UART_THR empty */ +#define IIR_RX_READY 0x04 /* Receive data ready */ +#define IIR_LINE_CHANGE 0x06 /* Receive line status */ +#define IIR_STATUS 0x06 /* Highest Priority Pending Interrupt */ + +/* UARTx_GCTL Masks */ +#define UCEN 0x01 /* Enable UARTx Clocks */ +#define IREN 0x02 /* Enable IrDA Mode */ +#define TPOLC 0x04 /* IrDA TX Polarity Change */ +#define RPOLC 0x08 /* IrDA RX Polarity Change */ +#define FPE 0x10 /* Force Parity Error On Transmit */ +#define FFE 0x20 /* Force Framing Error On Transmit */ + + +/* *********** SERIAL PERIPHERAL INTERFACE (SPI) MASKS ****************************/ +/* SPI_CTL Masks */ +#define TIMOD 0x0003 /* Transfer Initiate Mode */ +#define RDBR_CORE 0x0000 /* RDBR Read Initiates, IRQ When RDBR Full */ +#define TDBR_CORE 0x0001 /* TDBR Write Initiates, IRQ When TDBR Empty */ +#define RDBR_DMA 0x0002 /* DMA Read, DMA Until FIFO Empty */ +#define TDBR_DMA 0x0003 /* DMA Write, DMA Until FIFO Full */ +#define SZ 0x0004 /* Send Zero (When TDBR Empty, Send Zero/Last*) */ +#define GM 0x0008 /* Get More (When RDBR Full, Overwrite/Discard*) */ +#define PSSE 0x0010 /* Slave-Select Input Enable */ +#define EMISO 0x0020 /* Enable MISO As Output */ +#define SIZE 0x0100 /* Size of Words (16/8* Bits) */ +#define LSBF 0x0200 /* LSB First */ +#define CPHA 0x0400 /* Clock Phase */ +#define CPOL 0x0800 /* Clock Polarity */ +#define MSTR 0x1000 /* Master/Slave* */ +#define WOM 0x2000 /* Write Open Drain Master */ +#define SPE 0x4000 /* SPI Enable */ + +/* SPI_FLG Masks */ +#define FLS1 0x0002 /* Enables SPI_FLOUT1 as SPI Slave-Select Output */ +#define FLS2 0x0004 /* Enables SPI_FLOUT2 as SPI Slave-Select Output */ +#define FLS3 0x0008 /* Enables SPI_FLOUT3 as SPI Slave-Select Output */ +#define FLS4 0x0010 /* Enables SPI_FLOUT4 as SPI Slave-Select Output */ +#define FLS5 0x0020 /* Enables SPI_FLOUT5 as SPI Slave-Select Output */ +#define FLS6 0x0040 /* Enables SPI_FLOUT6 as SPI Slave-Select Output */ +#define FLS7 0x0080 /* Enables SPI_FLOUT7 as SPI Slave-Select Output */ +#define FLG1 0xFDFF /* Activates SPI_FLOUT1 */ +#define FLG2 0xFBFF /* Activates SPI_FLOUT2 */ +#define FLG3 0xF7FF /* Activates SPI_FLOUT3 */ +#define FLG4 0xEFFF /* Activates SPI_FLOUT4 */ +#define FLG5 0xDFFF /* Activates SPI_FLOUT5 */ +#define FLG6 0xBFFF /* Activates SPI_FLOUT6 */ +#define FLG7 0x7FFF /* Activates SPI_FLOUT7 */ + +/* SPI_STAT Masks */ +#define SPIF 0x0001 /* SPI Finished (Single-Word Transfer Complete) */ +#define MODF 0x0002 /* Mode Fault Error (Another Device Tried To Become Master) */ +#define TXE 0x0004 /* Transmission Error (Data Sent With No New Data In TDBR) */ +#define TXS 0x0008 /* SPI_TDBR Data Buffer Status (Full/Empty*) */ +#define RBSY 0x0010 /* Receive Error (Data Received With RDBR Full) */ +#define RXS 0x0020 /* SPI_RDBR Data Buffer Status (Full/Empty*) */ +#define TXCOL 0x0040 /* Transmit Collision Error (Corrupt Data May Have Been Sent) */ + + +/* **************** GENERAL PURPOSE TIMER MASKS **********************/ +/* TIMER_ENABLE Masks */ +#define TIMEN0 0x0001 /* Enable Timer 0 */ +#define TIMEN1 0x0002 /* Enable Timer 1 */ +#define TIMEN2 0x0004 /* Enable Timer 2 */ +#define TIMEN3 0x0008 /* Enable Timer 3 */ +#define TIMEN4 0x0010 /* Enable Timer 4 */ +#define TIMEN5 0x0020 /* Enable Timer 5 */ +#define TIMEN6 0x0040 /* Enable Timer 6 */ +#define TIMEN7 0x0080 /* Enable Timer 7 */ + +/* TIMER_DISABLE Masks */ +#define TIMDIS0 TIMEN0 /* Disable Timer 0 */ +#define TIMDIS1 TIMEN1 /* Disable Timer 1 */ +#define TIMDIS2 TIMEN2 /* Disable Timer 2 */ +#define TIMDIS3 TIMEN3 /* Disable Timer 3 */ +#define TIMDIS4 TIMEN4 /* Disable Timer 4 */ +#define TIMDIS5 TIMEN5 /* Disable Timer 5 */ +#define TIMDIS6 TIMEN6 /* Disable Timer 6 */ +#define TIMDIS7 TIMEN7 /* Disable Timer 7 */ + +/* TIMER_STATUS Masks */ +#define TIMIL0 0x00000001 /* Timer 0 Interrupt */ +#define TIMIL1 0x00000002 /* Timer 1 Interrupt */ +#define TIMIL2 0x00000004 /* Timer 2 Interrupt */ +#define TIMIL3 0x00000008 /* Timer 3 Interrupt */ +#define TOVF_ERR0 0x00000010 /* Timer 0 Counter Overflow */ +#define TOVF_ERR1 0x00000020 /* Timer 1 Counter Overflow */ +#define TOVF_ERR2 0x00000040 /* Timer 2 Counter Overflow */ +#define TOVF_ERR3 0x00000080 /* Timer 3 Counter Overflow */ +#define TRUN0 0x00001000 /* Timer 0 Slave Enable Status */ +#define TRUN1 0x00002000 /* Timer 1 Slave Enable Status */ +#define TRUN2 0x00004000 /* Timer 2 Slave Enable Status */ +#define TRUN3 0x00008000 /* Timer 3 Slave Enable Status */ +#define TIMIL4 0x00010000 /* Timer 4 Interrupt */ +#define TIMIL5 0x00020000 /* Timer 5 Interrupt */ +#define TIMIL6 0x00040000 /* Timer 6 Interrupt */ +#define TIMIL7 0x00080000 /* Timer 7 Interrupt */ +#define TOVF_ERR4 0x00100000 /* Timer 4 Counter Overflow */ +#define TOVF_ERR5 0x00200000 /* Timer 5 Counter Overflow */ +#define TOVF_ERR6 0x00400000 /* Timer 6 Counter Overflow */ +#define TOVF_ERR7 0x00800000 /* Timer 7 Counter Overflow */ +#define TRUN4 0x10000000 /* Timer 4 Slave Enable Status */ +#define TRUN5 0x20000000 /* Timer 5 Slave Enable Status */ +#define TRUN6 0x40000000 /* Timer 6 Slave Enable Status */ +#define TRUN7 0x80000000 /* Timer 7 Slave Enable Status */ + +/* Alternate Deprecated Macros Provided For Backwards Code Compatibility */ +#define TOVL_ERR0 TOVF_ERR0 +#define TOVL_ERR1 TOVF_ERR1 +#define TOVL_ERR2 TOVF_ERR2 +#define TOVL_ERR3 TOVF_ERR3 +#define TOVL_ERR4 TOVF_ERR4 +#define TOVL_ERR5 TOVF_ERR5 +#define TOVL_ERR6 TOVF_ERR6 +#define TOVL_ERR7 TOVF_ERR7 + +/* TIMERx_CONFIG Masks */ +#define PWM_OUT 0x0001 /* Pulse-Width Modulation Output Mode */ +#define WDTH_CAP 0x0002 /* Width Capture Input Mode */ +#define EXT_CLK 0x0003 /* External Clock Mode */ +#define PULSE_HI 0x0004 /* Action Pulse (Positive/Negative*) */ +#define PERIOD_CNT 0x0008 /* Period Count */ +#define IRQ_ENA 0x0010 /* Interrupt Request Enable */ +#define TIN_SEL 0x0020 /* Timer Input Select */ +#define OUT_DIS 0x0040 /* Output Pad Disable */ +#define CLK_SEL 0x0080 /* Timer Clock Select */ +#define TOGGLE_HI 0x0100 /* PWM_OUT PULSE_HI Toggle Mode */ +#define EMU_RUN 0x0200 /* Emulation Behavior Select */ +#define ERR_TYP 0xC000 /* Error Type */ + + +/* ****************** GPIO PORTS F, G, H MASKS ***********************/ +/* General Purpose IO (0xFFC00700 - 0xFFC007FF) Masks */ +/* Port F Masks */ +#define PF0 0x0001 +#define PF1 0x0002 +#define PF2 0x0004 +#define PF3 0x0008 +#define PF4 0x0010 +#define PF5 0x0020 +#define PF6 0x0040 +#define PF7 0x0080 +#define PF8 0x0100 +#define PF9 0x0200 +#define PF10 0x0400 +#define PF11 0x0800 +#define PF12 0x1000 +#define PF13 0x2000 +#define PF14 0x4000 +#define PF15 0x8000 + +/* Port G Masks */ +#define PG0 0x0001 +#define PG1 0x0002 +#define PG2 0x0004 +#define PG3 0x0008 +#define PG4 0x0010 +#define PG5 0x0020 +#define PG6 0x0040 +#define PG7 0x0080 +#define PG8 0x0100 +#define PG9 0x0200 +#define PG10 0x0400 +#define PG11 0x0800 +#define PG12 0x1000 +#define PG13 0x2000 +#define PG14 0x4000 +#define PG15 0x8000 + +/* Port H Masks */ +#define PH0 0x0001 +#define PH1 0x0002 +#define PH2 0x0004 +#define PH3 0x0008 +#define PH4 0x0010 +#define PH5 0x0020 +#define PH6 0x0040 +#define PH7 0x0080 +#define PH8 0x0100 +#define PH9 0x0200 +#define PH10 0x0400 +#define PH11 0x0800 +#define PH12 0x1000 +#define PH13 0x2000 +#define PH14 0x4000 +#define PH15 0x8000 + + +/* ******************* SERIAL PORT MASKS **************************************/ +/* SPORTx_TCR1 Masks */ +#define TSPEN 0x0001 /* Transmit Enable */ +#define ITCLK 0x0002 /* Internal Transmit Clock Select */ +#define DTYPE_NORM 0x0004 /* Data Format Normal */ +#define DTYPE_ULAW 0x0008 /* Compand Using u-Law */ +#define DTYPE_ALAW 0x000C /* Compand Using A-Law */ +#define TLSBIT 0x0010 /* Transmit Bit Order */ +#define ITFS 0x0200 /* Internal Transmit Frame Sync Select */ +#define TFSR 0x0400 /* Transmit Frame Sync Required Select */ +#define DITFS 0x0800 /* Data-Independent Transmit Frame Sync Select */ +#define LTFS 0x1000 /* Low Transmit Frame Sync Select */ +#define LATFS 0x2000 /* Late Transmit Frame Sync Select */ +#define TCKFE 0x4000 /* Clock Falling Edge Select */ + +/* SPORTx_TCR2 Masks and Macro */ +#define SLEN(x) ((x)&0x1F) /* SPORT TX Word Length (2 - 31) */ +#define TXSE 0x0100 /* TX Secondary Enable */ +#define TSFSE 0x0200 /* Transmit Stereo Frame Sync Enable */ +#define TRFST 0x0400 /* Left/Right Order (1 = Right Channel 1st) */ + +/* SPORTx_RCR1 Masks */ +#define RSPEN 0x0001 /* Receive Enable */ +#define IRCLK 0x0002 /* Internal Receive Clock Select */ +#define DTYPE_NORM 0x0004 /* Data Format Normal */ +#define DTYPE_ULAW 0x0008 /* Compand Using u-Law */ +#define DTYPE_ALAW 0x000C /* Compand Using A-Law */ +#define RLSBIT 0x0010 /* Receive Bit Order */ +#define IRFS 0x0200 /* Internal Receive Frame Sync Select */ +#define RFSR 0x0400 /* Receive Frame Sync Required Select */ +#define LRFS 0x1000 /* Low Receive Frame Sync Select */ +#define LARFS 0x2000 /* Late Receive Frame Sync Select */ +#define RCKFE 0x4000 /* Clock Falling Edge Select */ + +/* SPORTx_RCR2 Masks */ +#define SLEN(x) ((x)&0x1F) /* SPORT RX Word Length (2 - 31) */ +#define RXSE 0x0100 /* RX Secondary Enable */ +#define RSFSE 0x0200 /* RX Stereo Frame Sync Enable */ +#define RRFST 0x0400 /* Right-First Data Order */ + +/* SPORTx_STAT Masks */ +#define RXNE 0x0001 /* Receive FIFO Not Empty Status */ +#define RUVF 0x0002 /* Sticky Receive Underflow Status */ +#define ROVF 0x0004 /* Sticky Receive Overflow Status */ +#define TXF 0x0008 /* Transmit FIFO Full Status */ +#define TUVF 0x0010 /* Sticky Transmit Underflow Status */ +#define TOVF 0x0020 /* Sticky Transmit Overflow Status */ +#define TXHRE 0x0040 /* Transmit Hold Register Empty */ + +/* SPORTx_MCMC1 Macros */ +#define SP_WOFF(x) ((x) & 0x3FF) /* Multichannel Window Offset Field */ + +/* Only use WSIZE Macro With Logic OR While Setting Lower Order Bits */ +#define SP_WSIZE(x) (((((x)>>0x3)-1)&0xF) << 0xC) /* Multichannel Window Size = (x/8)-1 */ + +/* SPORTx_MCMC2 Masks */ +#define REC_BYPASS 0x0000 /* Bypass Mode (No Clock Recovery) */ +#define REC_2FROM4 0x0002 /* Recover 2 MHz Clock from 4 MHz Clock */ +#define REC_8FROM16 0x0003 /* Recover 8 MHz Clock from 16 MHz Clock */ +#define MCDTXPE 0x0004 /* Multichannel DMA Transmit Packing */ +#define MCDRXPE 0x0008 /* Multichannel DMA Receive Packing */ +#define MCMEN 0x0010 /* Multichannel Frame Mode Enable */ +#define FSDR 0x0080 /* Multichannel Frame Sync to Data Relationship */ +#define MFD_0 0x0000 /* Multichannel Frame Delay = 0 */ +#define MFD_1 0x1000 /* Multichannel Frame Delay = 1 */ +#define MFD_2 0x2000 /* Multichannel Frame Delay = 2 */ +#define MFD_3 0x3000 /* Multichannel Frame Delay = 3 */ +#define MFD_4 0x4000 /* Multichannel Frame Delay = 4 */ +#define MFD_5 0x5000 /* Multichannel Frame Delay = 5 */ +#define MFD_6 0x6000 /* Multichannel Frame Delay = 6 */ +#define MFD_7 0x7000 /* Multichannel Frame Delay = 7 */ +#define MFD_8 0x8000 /* Multichannel Frame Delay = 8 */ +#define MFD_9 0x9000 /* Multichannel Frame Delay = 9 */ +#define MFD_10 0xA000 /* Multichannel Frame Delay = 10 */ +#define MFD_11 0xB000 /* Multichannel Frame Delay = 11 */ +#define MFD_12 0xC000 /* Multichannel Frame Delay = 12 */ +#define MFD_13 0xD000 /* Multichannel Frame Delay = 13 */ +#define MFD_14 0xE000 /* Multichannel Frame Delay = 14 */ +#define MFD_15 0xF000 /* Multichannel Frame Delay = 15 */ + + +/* ********************* ASYNCHRONOUS MEMORY CONTROLLER MASKS *************************/ +/* EBIU_AMGCTL Masks */ +#define AMCKEN 0x0001 /* Enable CLKOUT */ +#define AMBEN_NONE 0x0000 /* All Banks Disabled */ +#define AMBEN_B0 0x0002 /* Enable Async Memory Bank 0 only */ +#define AMBEN_B0_B1 0x0004 /* Enable Async Memory Banks 0 & 1 only */ +#define AMBEN_B0_B1_B2 0x0006 /* Enable Async Memory Banks 0, 1, and 2 */ +#define AMBEN_ALL 0x0008 /* Enable Async Memory Banks (all) 0, 1, 2, and 3 */ + +/* EBIU_AMBCTL0 Masks */ +#define B0RDYEN 0x00000001 /* Bank 0 (B0) RDY Enable */ +#define B0RDYPOL 0x00000002 /* B0 RDY Active High */ +#define B0TT_1 0x00000004 /* B0 Transition Time (Read to Write) = 1 cycle */ +#define B0TT_2 0x00000008 /* B0 Transition Time (Read to Write) = 2 cycles */ +#define B0TT_3 0x0000000C /* B0 Transition Time (Read to Write) = 3 cycles */ +#define B0TT_4 0x00000000 /* B0 Transition Time (Read to Write) = 4 cycles */ +#define B0ST_1 0x00000010 /* B0 Setup Time (AOE to Read/Write) = 1 cycle */ +#define B0ST_2 0x00000020 /* B0 Setup Time (AOE to Read/Write) = 2 cycles */ +#define B0ST_3 0x00000030 /* B0 Setup Time (AOE to Read/Write) = 3 cycles */ +#define B0ST_4 0x00000000 /* B0 Setup Time (AOE to Read/Write) = 4 cycles */ +#define B0HT_1 0x00000040 /* B0 Hold Time (~Read/Write to ~AOE) = 1 cycle */ +#define B0HT_2 0x00000080 /* B0 Hold Time (~Read/Write to ~AOE) = 2 cycles */ +#define B0HT_3 0x000000C0 /* B0 Hold Time (~Read/Write to ~AOE) = 3 cycles */ +#define B0HT_0 0x00000000 /* B0 Hold Time (~Read/Write to ~AOE) = 0 cycles */ +#define B0RAT_1 0x00000100 /* B0 Read Access Time = 1 cycle */ +#define B0RAT_2 0x00000200 /* B0 Read Access Time = 2 cycles */ +#define B0RAT_3 0x00000300 /* B0 Read Access Time = 3 cycles */ +#define B0RAT_4 0x00000400 /* B0 Read Access Time = 4 cycles */ +#define B0RAT_5 0x00000500 /* B0 Read Access Time = 5 cycles */ +#define B0RAT_6 0x00000600 /* B0 Read Access Time = 6 cycles */ +#define B0RAT_7 0x00000700 /* B0 Read Access Time = 7 cycles */ +#define B0RAT_8 0x00000800 /* B0 Read Access Time = 8 cycles */ +#define B0RAT_9 0x00000900 /* B0 Read Access Time = 9 cycles */ +#define B0RAT_10 0x00000A00 /* B0 Read Access Time = 10 cycles */ +#define B0RAT_11 0x00000B00 /* B0 Read Access Time = 11 cycles */ +#define B0RAT_12 0x00000C00 /* B0 Read Access Time = 12 cycles */ +#define B0RAT_13 0x00000D00 /* B0 Read Access Time = 13 cycles */ +#define B0RAT_14 0x00000E00 /* B0 Read Access Time = 14 cycles */ +#define B0RAT_15 0x00000F00 /* B0 Read Access Time = 15 cycles */ +#define B0WAT_1 0x00001000 /* B0 Write Access Time = 1 cycle */ +#define B0WAT_2 0x00002000 /* B0 Write Access Time = 2 cycles */ +#define B0WAT_3 0x00003000 /* B0 Write Access Time = 3 cycles */ +#define B0WAT_4 0x00004000 /* B0 Write Access Time = 4 cycles */ +#define B0WAT_5 0x00005000 /* B0 Write Access Time = 5 cycles */ +#define B0WAT_6 0x00006000 /* B0 Write Access Time = 6 cycles */ +#define B0WAT_7 0x00007000 /* B0 Write Access Time = 7 cycles */ +#define B0WAT_8 0x00008000 /* B0 Write Access Time = 8 cycles */ +#define B0WAT_9 0x00009000 /* B0 Write Access Time = 9 cycles */ +#define B0WAT_10 0x0000A000 /* B0 Write Access Time = 10 cycles */ +#define B0WAT_11 0x0000B000 /* B0 Write Access Time = 11 cycles */ +#define B0WAT_12 0x0000C000 /* B0 Write Access Time = 12 cycles */ +#define B0WAT_13 0x0000D000 /* B0 Write Access Time = 13 cycles */ +#define B0WAT_14 0x0000E000 /* B0 Write Access Time = 14 cycles */ +#define B0WAT_15 0x0000F000 /* B0 Write Access Time = 15 cycles */ + +#define B1RDYEN 0x00010000 /* Bank 1 (B1) RDY Enable */ +#define B1RDYPOL 0x00020000 /* B1 RDY Active High */ +#define B1TT_1 0x00040000 /* B1 Transition Time (Read to Write) = 1 cycle */ +#define B1TT_2 0x00080000 /* B1 Transition Time (Read to Write) = 2 cycles */ +#define B1TT_3 0x000C0000 /* B1 Transition Time (Read to Write) = 3 cycles */ +#define B1TT_4 0x00000000 /* B1 Transition Time (Read to Write) = 4 cycles */ +#define B1ST_1 0x00100000 /* B1 Setup Time (AOE to Read/Write) = 1 cycle */ +#define B1ST_2 0x00200000 /* B1 Setup Time (AOE to Read/Write) = 2 cycles */ +#define B1ST_3 0x00300000 /* B1 Setup Time (AOE to Read/Write) = 3 cycles */ +#define B1ST_4 0x00000000 /* B1 Setup Time (AOE to Read/Write) = 4 cycles */ +#define B1HT_1 0x00400000 /* B1 Hold Time (~Read/Write to ~AOE) = 1 cycle */ +#define B1HT_2 0x00800000 /* B1 Hold Time (~Read/Write to ~AOE) = 2 cycles */ +#define B1HT_3 0x00C00000 /* B1 Hold Time (~Read/Write to ~AOE) = 3 cycles */ +#define B1HT_0 0x00000000 /* B1 Hold Time (~Read/Write to ~AOE) = 0 cycles */ +#define B1RAT_1 0x01000000 /* B1 Read Access Time = 1 cycle */ +#define B1RAT_2 0x02000000 /* B1 Read Access Time = 2 cycles */ +#define B1RAT_3 0x03000000 /* B1 Read Access Time = 3 cycles */ +#define B1RAT_4 0x04000000 /* B1 Read Access Time = 4 cycles */ +#define B1RAT_5 0x05000000 /* B1 Read Access Time = 5 cycles */ +#define B1RAT_6 0x06000000 /* B1 Read Access Time = 6 cycles */ +#define B1RAT_7 0x07000000 /* B1 Read Access Time = 7 cycles */ +#define B1RAT_8 0x08000000 /* B1 Read Access Time = 8 cycles */ +#define B1RAT_9 0x09000000 /* B1 Read Access Time = 9 cycles */ +#define B1RAT_10 0x0A000000 /* B1 Read Access Time = 10 cycles */ +#define B1RAT_11 0x0B000000 /* B1 Read Access Time = 11 cycles */ +#define B1RAT_12 0x0C000000 /* B1 Read Access Time = 12 cycles */ +#define B1RAT_13 0x0D000000 /* B1 Read Access Time = 13 cycles */ +#define B1RAT_14 0x0E000000 /* B1 Read Access Time = 14 cycles */ +#define B1RAT_15 0x0F000000 /* B1 Read Access Time = 15 cycles */ +#define B1WAT_1 0x10000000 /* B1 Write Access Time = 1 cycle */ +#define B1WAT_2 0x20000000 /* B1 Write Access Time = 2 cycles */ +#define B1WAT_3 0x30000000 /* B1 Write Access Time = 3 cycles */ +#define B1WAT_4 0x40000000 /* B1 Write Access Time = 4 cycles */ +#define B1WAT_5 0x50000000 /* B1 Write Access Time = 5 cycles */ +#define B1WAT_6 0x60000000 /* B1 Write Access Time = 6 cycles */ +#define B1WAT_7 0x70000000 /* B1 Write Access Time = 7 cycles */ +#define B1WAT_8 0x80000000 /* B1 Write Access Time = 8 cycles */ +#define B1WAT_9 0x90000000 /* B1 Write Access Time = 9 cycles */ +#define B1WAT_10 0xA0000000 /* B1 Write Access Time = 10 cycles */ +#define B1WAT_11 0xB0000000 /* B1 Write Access Time = 11 cycles */ +#define B1WAT_12 0xC0000000 /* B1 Write Access Time = 12 cycles */ +#define B1WAT_13 0xD0000000 /* B1 Write Access Time = 13 cycles */ +#define B1WAT_14 0xE0000000 /* B1 Write Access Time = 14 cycles */ +#define B1WAT_15 0xF0000000 /* B1 Write Access Time = 15 cycles */ + +/* EBIU_AMBCTL1 Masks */ +#define B2RDYEN 0x00000001 /* Bank 2 (B2) RDY Enable */ +#define B2RDYPOL 0x00000002 /* B2 RDY Active High */ +#define B2TT_1 0x00000004 /* B2 Transition Time (Read to Write) = 1 cycle */ +#define B2TT_2 0x00000008 /* B2 Transition Time (Read to Write) = 2 cycles */ +#define B2TT_3 0x0000000C /* B2 Transition Time (Read to Write) = 3 cycles */ +#define B2TT_4 0x00000000 /* B2 Transition Time (Read to Write) = 4 cycles */ +#define B2ST_1 0x00000010 /* B2 Setup Time (AOE to Read/Write) = 1 cycle */ +#define B2ST_2 0x00000020 /* B2 Setup Time (AOE to Read/Write) = 2 cycles */ +#define B2ST_3 0x00000030 /* B2 Setup Time (AOE to Read/Write) = 3 cycles */ +#define B2ST_4 0x00000000 /* B2 Setup Time (AOE to Read/Write) = 4 cycles */ +#define B2HT_1 0x00000040 /* B2 Hold Time (~Read/Write to ~AOE) = 1 cycle */ +#define B2HT_2 0x00000080 /* B2 Hold Time (~Read/Write to ~AOE) = 2 cycles */ +#define B2HT_3 0x000000C0 /* B2 Hold Time (~Read/Write to ~AOE) = 3 cycles */ +#define B2HT_0 0x00000000 /* B2 Hold Time (~Read/Write to ~AOE) = 0 cycles */ +#define B2RAT_1 0x00000100 /* B2 Read Access Time = 1 cycle */ +#define B2RAT_2 0x00000200 /* B2 Read Access Time = 2 cycles */ +#define B2RAT_3 0x00000300 /* B2 Read Access Time = 3 cycles */ +#define B2RAT_4 0x00000400 /* B2 Read Access Time = 4 cycles */ +#define B2RAT_5 0x00000500 /* B2 Read Access Time = 5 cycles */ +#define B2RAT_6 0x00000600 /* B2 Read Access Time = 6 cycles */ +#define B2RAT_7 0x00000700 /* B2 Read Access Time = 7 cycles */ +#define B2RAT_8 0x00000800 /* B2 Read Access Time = 8 cycles */ +#define B2RAT_9 0x00000900 /* B2 Read Access Time = 9 cycles */ +#define B2RAT_10 0x00000A00 /* B2 Read Access Time = 10 cycles */ +#define B2RAT_11 0x00000B00 /* B2 Read Access Time = 11 cycles */ +#define B2RAT_12 0x00000C00 /* B2 Read Access Time = 12 cycles */ +#define B2RAT_13 0x00000D00 /* B2 Read Access Time = 13 cycles */ +#define B2RAT_14 0x00000E00 /* B2 Read Access Time = 14 cycles */ +#define B2RAT_15 0x00000F00 /* B2 Read Access Time = 15 cycles */ +#define B2WAT_1 0x00001000 /* B2 Write Access Time = 1 cycle */ +#define B2WAT_2 0x00002000 /* B2 Write Access Time = 2 cycles */ +#define B2WAT_3 0x00003000 /* B2 Write Access Time = 3 cycles */ +#define B2WAT_4 0x00004000 /* B2 Write Access Time = 4 cycles */ +#define B2WAT_5 0x00005000 /* B2 Write Access Time = 5 cycles */ +#define B2WAT_6 0x00006000 /* B2 Write Access Time = 6 cycles */ +#define B2WAT_7 0x00007000 /* B2 Write Access Time = 7 cycles */ +#define B2WAT_8 0x00008000 /* B2 Write Access Time = 8 cycles */ +#define B2WAT_9 0x00009000 /* B2 Write Access Time = 9 cycles */ +#define B2WAT_10 0x0000A000 /* B2 Write Access Time = 10 cycles */ +#define B2WAT_11 0x0000B000 /* B2 Write Access Time = 11 cycles */ +#define B2WAT_12 0x0000C000 /* B2 Write Access Time = 12 cycles */ +#define B2WAT_13 0x0000D000 /* B2 Write Access Time = 13 cycles */ +#define B2WAT_14 0x0000E000 /* B2 Write Access Time = 14 cycles */ +#define B2WAT_15 0x0000F000 /* B2 Write Access Time = 15 cycles */ + +#define B3RDYEN 0x00010000 /* Bank 3 (B3) RDY Enable */ +#define B3RDYPOL 0x00020000 /* B3 RDY Active High */ +#define B3TT_1 0x00040000 /* B3 Transition Time (Read to Write) = 1 cycle */ +#define B3TT_2 0x00080000 /* B3 Transition Time (Read to Write) = 2 cycles */ +#define B3TT_3 0x000C0000 /* B3 Transition Time (Read to Write) = 3 cycles */ +#define B3TT_4 0x00000000 /* B3 Transition Time (Read to Write) = 4 cycles */ +#define B3ST_1 0x00100000 /* B3 Setup Time (AOE to Read/Write) = 1 cycle */ +#define B3ST_2 0x00200000 /* B3 Setup Time (AOE to Read/Write) = 2 cycles */ +#define B3ST_3 0x00300000 /* B3 Setup Time (AOE to Read/Write) = 3 cycles */ +#define B3ST_4 0x00000000 /* B3 Setup Time (AOE to Read/Write) = 4 cycles */ +#define B3HT_1 0x00400000 /* B3 Hold Time (~Read/Write to ~AOE) = 1 cycle */ +#define B3HT_2 0x00800000 /* B3 Hold Time (~Read/Write to ~AOE) = 2 cycles */ +#define B3HT_3 0x00C00000 /* B3 Hold Time (~Read/Write to ~AOE) = 3 cycles */ +#define B3HT_0 0x00000000 /* B3 Hold Time (~Read/Write to ~AOE) = 0 cycles */ +#define B3RAT_1 0x01000000 /* B3 Read Access Time = 1 cycle */ +#define B3RAT_2 0x02000000 /* B3 Read Access Time = 2 cycles */ +#define B3RAT_3 0x03000000 /* B3 Read Access Time = 3 cycles */ +#define B3RAT_4 0x04000000 /* B3 Read Access Time = 4 cycles */ +#define B3RAT_5 0x05000000 /* B3 Read Access Time = 5 cycles */ +#define B3RAT_6 0x06000000 /* B3 Read Access Time = 6 cycles */ +#define B3RAT_7 0x07000000 /* B3 Read Access Time = 7 cycles */ +#define B3RAT_8 0x08000000 /* B3 Read Access Time = 8 cycles */ +#define B3RAT_9 0x09000000 /* B3 Read Access Time = 9 cycles */ +#define B3RAT_10 0x0A000000 /* B3 Read Access Time = 10 cycles */ +#define B3RAT_11 0x0B000000 /* B3 Read Access Time = 11 cycles */ +#define B3RAT_12 0x0C000000 /* B3 Read Access Time = 12 cycles */ +#define B3RAT_13 0x0D000000 /* B3 Read Access Time = 13 cycles */ +#define B3RAT_14 0x0E000000 /* B3 Read Access Time = 14 cycles */ +#define B3RAT_15 0x0F000000 /* B3 Read Access Time = 15 cycles */ +#define B3WAT_1 0x10000000 /* B3 Write Access Time = 1 cycle */ +#define B3WAT_2 0x20000000 /* B3 Write Access Time = 2 cycles */ +#define B3WAT_3 0x30000000 /* B3 Write Access Time = 3 cycles */ +#define B3WAT_4 0x40000000 /* B3 Write Access Time = 4 cycles */ +#define B3WAT_5 0x50000000 /* B3 Write Access Time = 5 cycles */ +#define B3WAT_6 0x60000000 /* B3 Write Access Time = 6 cycles */ +#define B3WAT_7 0x70000000 /* B3 Write Access Time = 7 cycles */ +#define B3WAT_8 0x80000000 /* B3 Write Access Time = 8 cycles */ +#define B3WAT_9 0x90000000 /* B3 Write Access Time = 9 cycles */ +#define B3WAT_10 0xA0000000 /* B3 Write Access Time = 10 cycles */ +#define B3WAT_11 0xB0000000 /* B3 Write Access Time = 11 cycles */ +#define B3WAT_12 0xC0000000 /* B3 Write Access Time = 12 cycles */ +#define B3WAT_13 0xD0000000 /* B3 Write Access Time = 13 cycles */ +#define B3WAT_14 0xE0000000 /* B3 Write Access Time = 14 cycles */ +#define B3WAT_15 0xF0000000 /* B3 Write Access Time = 15 cycles */ + + +/* ********************** SDRAM CONTROLLER MASKS **********************************************/ +/* EBIU_SDGCTL Masks */ +#define SCTLE 0x00000001 /* Enable SDRAM Signals */ +#define CL_2 0x00000008 /* SDRAM CAS Latency = 2 cycles */ +#define CL_3 0x0000000C /* SDRAM CAS Latency = 3 cycles */ +#define PASR_ALL 0x00000000 /* All 4 SDRAM Banks Refreshed In Self-Refresh */ +#define PASR_B0_B1 0x00000010 /* SDRAM Banks 0 and 1 Are Refreshed In Self-Refresh */ +#define PASR_B0 0x00000020 /* Only SDRAM Bank 0 Is Refreshed In Self-Refresh */ +#define TRAS_1 0x00000040 /* SDRAM tRAS = 1 cycle */ +#define TRAS_2 0x00000080 /* SDRAM tRAS = 2 cycles */ +#define TRAS_3 0x000000C0 /* SDRAM tRAS = 3 cycles */ +#define TRAS_4 0x00000100 /* SDRAM tRAS = 4 cycles */ +#define TRAS_5 0x00000140 /* SDRAM tRAS = 5 cycles */ +#define TRAS_6 0x00000180 /* SDRAM tRAS = 6 cycles */ +#define TRAS_7 0x000001C0 /* SDRAM tRAS = 7 cycles */ +#define TRAS_8 0x00000200 /* SDRAM tRAS = 8 cycles */ +#define TRAS_9 0x00000240 /* SDRAM tRAS = 9 cycles */ +#define TRAS_10 0x00000280 /* SDRAM tRAS = 10 cycles */ +#define TRAS_11 0x000002C0 /* SDRAM tRAS = 11 cycles */ +#define TRAS_12 0x00000300 /* SDRAM tRAS = 12 cycles */ +#define TRAS_13 0x00000340 /* SDRAM tRAS = 13 cycles */ +#define TRAS_14 0x00000380 /* SDRAM tRAS = 14 cycles */ +#define TRAS_15 0x000003C0 /* SDRAM tRAS = 15 cycles */ +#define TRP_1 0x00000800 /* SDRAM tRP = 1 cycle */ +#define TRP_2 0x00001000 /* SDRAM tRP = 2 cycles */ +#define TRP_3 0x00001800 /* SDRAM tRP = 3 cycles */ +#define TRP_4 0x00002000 /* SDRAM tRP = 4 cycles */ +#define TRP_5 0x00002800 /* SDRAM tRP = 5 cycles */ +#define TRP_6 0x00003000 /* SDRAM tRP = 6 cycles */ +#define TRP_7 0x00003800 /* SDRAM tRP = 7 cycles */ +#define TRCD_1 0x00008000 /* SDRAM tRCD = 1 cycle */ +#define TRCD_2 0x00010000 /* SDRAM tRCD = 2 cycles */ +#define TRCD_3 0x00018000 /* SDRAM tRCD = 3 cycles */ +#define TRCD_4 0x00020000 /* SDRAM tRCD = 4 cycles */ +#define TRCD_5 0x00028000 /* SDRAM tRCD = 5 cycles */ +#define TRCD_6 0x00030000 /* SDRAM tRCD = 6 cycles */ +#define TRCD_7 0x00038000 /* SDRAM tRCD = 7 cycles */ +#define TWR_1 0x00080000 /* SDRAM tWR = 1 cycle */ +#define TWR_2 0x00100000 /* SDRAM tWR = 2 cycles */ +#define TWR_3 0x00180000 /* SDRAM tWR = 3 cycles */ +#define PUPSD 0x00200000 /* Power-Up Start Delay (15 SCLK Cycles Delay) */ +#define PSM 0x00400000 /* Power-Up Sequence (Mode Register Before/After* Refresh) */ +#define PSS 0x00800000 /* Enable Power-Up Sequence on Next SDRAM Access */ +#define SRFS 0x01000000 /* Enable SDRAM Self-Refresh Mode */ +#define EBUFE 0x02000000 /* Enable External Buffering Timing */ +#define FBBRW 0x04000000 /* Enable Fast Back-To-Back Read To Write */ +#define EMREN 0x10000000 /* Extended Mode Register Enable */ +#define TCSR 0x20000000 /* Temp-Compensated Self-Refresh Value (85/45* Deg C) */ +#define CDDBG 0x40000000 /* Tristate SDRAM Controls During Bus Grant */ + +/* EBIU_SDBCTL Masks */ +#define EBE 0x0001 /* Enable SDRAM External Bank */ +#define EBSZ_16 0x0000 /* SDRAM External Bank Size = 16MB */ +#define EBSZ_32 0x0002 /* SDRAM External Bank Size = 32MB */ +#define EBSZ_64 0x0004 /* SDRAM External Bank Size = 64MB */ +#define EBSZ_128 0x0006 /* SDRAM External Bank Size = 128MB */ +#define EBSZ_256 0x0008 /* SDRAM External Bank Size = 256MB */ +#define EBSZ_512 0x000A /* SDRAM External Bank Size = 512MB */ +#define EBCAW_8 0x0000 /* SDRAM External Bank Column Address Width = 8 Bits */ +#define EBCAW_9 0x0010 /* SDRAM External Bank Column Address Width = 9 Bits */ +#define EBCAW_10 0x0020 /* SDRAM External Bank Column Address Width = 10 Bits */ +#define EBCAW_11 0x0030 /* SDRAM External Bank Column Address Width = 11 Bits */ + +/* EBIU_SDSTAT Masks */ +#define SDCI 0x0001 /* SDRAM Controller Idle */ +#define SDSRA 0x0002 /* SDRAM Self-Refresh Active */ +#define SDPUA 0x0004 /* SDRAM Power-Up Active */ +#define SDRS 0x0008 /* SDRAM Will Power-Up On Next Access */ +#define SDEASE 0x0010 /* SDRAM EAB Sticky Error Status */ +#define BGSTAT 0x0020 /* Bus Grant Status */ + + +/* ************************** DMA CONTROLLER MASKS ********************************/ +/* DMAx_CONFIG, MDMA_yy_CONFIG Masks */ +#define DMAEN 0x0001 /* DMA Channel Enable */ +#define WNR 0x0002 /* Channel Direction (W/R*) */ +#define WDSIZE_8 0x0000 /* Transfer Word Size = 8 */ +#define WDSIZE_16 0x0004 /* Transfer Word Size = 16 */ +#define WDSIZE_32 0x0008 /* Transfer Word Size = 32 */ +#define DMA2D 0x0010 /* DMA Mode (2D/1D*) */ +#define RESTART 0x0020 /* DMA Buffer Clear */ +#define DI_SEL 0x0040 /* Data Interrupt Timing Select */ +#define DI_EN 0x0080 /* Data Interrupt Enable */ +#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */ +#define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */ +#define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */ +#define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */ +#define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */ +#define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */ +#define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */ +#define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */ +#define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */ +#define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */ +#define NDSIZE 0x0900 /* Next Descriptor Size */ +#define DMAFLOW 0x7000 /* Flow Control */ +#define DMAFLOW_STOP 0x0000 /* Stop Mode */ +#define DMAFLOW_AUTO 0x1000 /* Autobuffer Mode */ +#define DMAFLOW_ARRAY 0x4000 /* Descriptor Array Mode */ +#define DMAFLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */ +#define DMAFLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */ + +/* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */ +#define CTYPE 0x0040 /* DMA Channel Type Indicator (Memory/Peripheral*) */ +#define PMAP 0xF000 /* Peripheral Mapped To This Channel */ +#define PMAP_PPI 0x0000 /* PPI Port DMA */ +#define PMAP_EMACRX 0x1000 /* Ethernet Receive DMA */ +#define PMAP_EMACTX 0x2000 /* Ethernet Transmit DMA */ +#define PMAP_SPORT0RX 0x3000 /* SPORT0 Receive DMA */ +#define PMAP_SPORT0TX 0x4000 /* SPORT0 Transmit DMA */ +#define PMAP_SPORT1RX 0x5000 /* SPORT1 Receive DMA */ +#define PMAP_SPORT1TX 0x6000 /* SPORT1 Transmit DMA */ +#define PMAP_SPI 0x7000 /* SPI Port DMA */ +#define PMAP_UART0RX 0x8000 /* UART0 Port Receive DMA */ +#define PMAP_UART0TX 0x9000 /* UART0 Port Transmit DMA */ +#define PMAP_UART1RX 0xA000 /* UART1 Port Receive DMA */ +#define PMAP_UART1TX 0xB000 /* UART1 Port Transmit DMA */ + +/* DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS Masks */ +#define DMA_DONE 0x0001 /* DMA Completion Interrupt Status */ +#define DMA_ERR 0x0002 /* DMA Error Interrupt Status */ +#define DFETCH 0x0004 /* DMA Descriptor Fetch Indicator */ +#define DMA_RUN 0x0008 /* DMA Channel Running Indicator */ + + +/* ************ PARALLEL PERIPHERAL INTERFACE (PPI) MASKS *************/ +/* PPI_CONTROL Masks */ +#define PORT_EN 0x0001 /* PPI Port Enable */ +#define PORT_DIR 0x0002 /* PPI Port Direction */ +#define XFR_TYPE 0x000C /* PPI Transfer Type */ +#define PORT_CFG 0x0030 /* PPI Port Configuration */ +#define FLD_SEL 0x0040 /* PPI Active Field Select */ +#define PACK_EN 0x0080 /* PPI Packing Mode */ +#define DMA32 0x0100 /* PPI 32-bit DMA Enable */ +#define SKIP_EN 0x0200 /* PPI Skip Element Enable */ +#define SKIP_EO 0x0400 /* PPI Skip Even/Odd Elements */ +#define DLEN_8 0x0000 /* Data Length = 8 Bits */ +#define DLEN_10 0x0800 /* Data Length = 10 Bits */ +#define DLEN_11 0x1000 /* Data Length = 11 Bits */ +#define DLEN_12 0x1800 /* Data Length = 12 Bits */ +#define DLEN_13 0x2000 /* Data Length = 13 Bits */ +#define DLEN_14 0x2800 /* Data Length = 14 Bits */ +#define DLEN_15 0x3000 /* Data Length = 15 Bits */ +#define DLEN_16 0x3800 /* Data Length = 16 Bits */ +#define DLENGTH 0x3800 /* PPI Data Length */ +#define POLC 0x4000 /* PPI Clock Polarity */ +#define POLS 0x8000 /* PPI Frame Sync Polarity */ + +/* PPI_STATUS Masks */ +#define FLD 0x0400 /* Field Indicator */ +#define FT_ERR 0x0800 /* Frame Track Error */ +#define OVR 0x1000 /* FIFO Overflow Error */ +#define UNDR 0x2000 /* FIFO Underrun Error */ +#define ERR_DET 0x4000 /* Error Detected Indicator */ +#define ERR_NCOR 0x8000 /* Error Not Corrected Indicator */ + + +/* ******************** TWO-WIRE INTERFACE (TWI) MASKS ***********************/ +/* TWI_CLKDIV Macros (Use: *pTWI_CLKDIV = CLKLOW(x)|CLKHI(y); ) */ +#define CLKLOW(x) ((x) & 0xFF) /* Periods Clock Is Held Low */ +#define CLKHI(y) (((y)&0xFF)<<0x8) /* Periods Before New Clock Low */ + +/* TWI_PRESCALE Masks */ +#define PRESCALE 0x007F /* SCLKs Per Internal Time Reference (10MHz) */ +#define TWI_ENA 0x0080 /* TWI Enable */ +#define SCCB 0x0200 /* SCCB Compatibility Enable */ + +/* TWI_SLAVE_CTRL Masks */ +#define SEN 0x0001 /* Slave Enable */ +#define SADD_LEN 0x0002 /* Slave Address Length */ +#define STDVAL 0x0004 /* Slave Transmit Data Valid */ +#define NAK 0x0008 /* NAK/ACK* Generated At Conclusion Of Transfer */ +#define GEN 0x0010 /* General Call Adrress Matching Enabled */ + +/* TWI_SLAVE_STAT Masks */ +#define SDIR 0x0001 /* Slave Transfer Direction (Transmit/Receive*) */ +#define GCALL 0x0002 /* General Call Indicator */ + +/* TWI_MASTER_CTRL Masks */ +#define MEN 0x0001 /* Master Mode Enable */ +#define MADD_LEN 0x0002 /* Master Address Length */ +#define MDIR 0x0004 /* Master Transmit Direction (RX/TX*) */ +#define FAST 0x0008 /* Use Fast Mode Timing Specs */ +#define STOP 0x0010 /* Issue Stop Condition */ +#define RSTART 0x0020 /* Repeat Start or Stop* At End Of Transfer */ +#define DCNT 0x3FC0 /* Data Bytes To Transfer */ +#define SDAOVR 0x4000 /* Serial Data Override */ +#define SCLOVR 0x8000 /* Serial Clock Override */ + +/* TWI_MASTER_STAT Masks */ +#define MPROG 0x0001 /* Master Transfer In Progress */ +#define LOSTARB 0x0002 /* Lost Arbitration Indicator (Xfer Aborted) */ +#define ANAK 0x0004 /* Address Not Acknowledged */ +#define DNAK 0x0008 /* Data Not Acknowledged */ +#define BUFRDERR 0x0010 /* Buffer Read Error */ +#define BUFWRERR 0x0020 /* Buffer Write Error */ +#define SDASEN 0x0040 /* Serial Data Sense */ +#define SCLSEN 0x0080 /* Serial Clock Sense */ +#define BUSBUSY 0x0100 /* Bus Busy Indicator */ + +/* TWI_INT_SRC and TWI_INT_ENABLE Masks */ +#define SINIT 0x0001 /* Slave Transfer Initiated */ +#define SCOMP 0x0002 /* Slave Transfer Complete */ +#define SERR 0x0004 /* Slave Transfer Error */ +#define SOVF 0x0008 /* Slave Overflow */ +#define MCOMP 0x0010 /* Master Transfer Complete */ +#define MERR 0x0020 /* Master Transfer Error */ +#define XMTSERV 0x0040 /* Transmit FIFO Service */ +#define RCVSERV 0x0080 /* Receive FIFO Service */ + +/* TWI_FIFO_CTRL Masks */ +#define XMTFLUSH 0x0001 /* Transmit Buffer Flush */ +#define RCVFLUSH 0x0002 /* Receive Buffer Flush */ +#define XMTINTLEN 0x0004 /* Transmit Buffer Interrupt Length */ +#define RCVINTLEN 0x0008 /* Receive Buffer Interrupt Length */ + +/* TWI_FIFO_STAT Masks */ +#define XMTSTAT 0x0003 /* Transmit FIFO Status */ +#define XMT_EMPTY 0x0000 /* Transmit FIFO Empty */ +#define XMT_HALF 0x0001 /* Transmit FIFO Has 1 Byte To Write */ +#define XMT_FULL 0x0003 /* Transmit FIFO Full (2 Bytes To Write) */ + +#define RCVSTAT 0x000C /* Receive FIFO Status */ +#define RCV_EMPTY 0x0000 /* Receive FIFO Empty */ +#define RCV_HALF 0x0004 /* Receive FIFO Has 1 Byte To Read */ +#define RCV_FULL 0x000C /* Receive FIFO Full (2 Bytes To Read) */ + + +/* Omit CAN masks from defBF534.h */ + +/* ******************* PIN CONTROL REGISTER MASKS ************************/ +/* PORT_MUX Masks */ +#define PJSE 0x0001 /* Port J SPI/SPORT Enable */ +#define PJSE_SPORT 0x0000 /* Enable TFS0/DT0PRI */ +#define PJSE_SPI 0x0001 /* Enable SPI_SSEL3:2 */ + +#define PJCE(x) (((x)&0x3)<<1) /* Port J CAN/SPI/SPORT Enable */ +#define PJCE_SPORT 0x0000 /* Enable DR0SEC/DT0SEC */ +#define PJCE_CAN 0x0002 /* Enable CAN RX/TX */ +#define PJCE_SPI 0x0004 /* Enable SPI_SSEL7 */ + +#define PFDE 0x0008 /* Port F DMA Request Enable */ +#define PFDE_UART 0x0000 /* Enable UART0 RX/TX */ +#define PFDE_DMA 0x0008 /* Enable DMAR1:0 */ + +#define PFTE 0x0010 /* Port F Timer Enable */ +#define PFTE_UART 0x0000 /* Enable UART1 RX/TX */ +#define PFTE_TIMER 0x0010 /* Enable TMR7:6 */ + +#define PFS6E 0x0020 /* Port F SPI SSEL 6 Enable */ +#define PFS6E_TIMER 0x0000 /* Enable TMR5 */ +#define PFS6E_SPI 0x0020 /* Enable SPI_SSEL6 */ + +#define PFS5E 0x0040 /* Port F SPI SSEL 5 Enable */ +#define PFS5E_TIMER 0x0000 /* Enable TMR4 */ +#define PFS5E_SPI 0x0040 /* Enable SPI_SSEL5 */ + +#define PFS4E 0x0080 /* Port F SPI SSEL 4 Enable */ +#define PFS4E_TIMER 0x0000 /* Enable TMR3 */ +#define PFS4E_SPI 0x0080 /* Enable SPI_SSEL4 */ + +#define PFFE 0x0100 /* Port F PPI Frame Sync Enable */ +#define PFFE_TIMER 0x0000 /* Enable TMR2 */ +#define PFFE_PPI 0x0100 /* Enable PPI FS3 */ + +#define PGSE 0x0200 /* Port G SPORT1 Secondary Enable */ +#define PGSE_PPI 0x0000 /* Enable PPI D9:8 */ +#define PGSE_SPORT 0x0200 /* Enable DR1SEC/DT1SEC */ + +#define PGRE 0x0400 /* Port G SPORT1 Receive Enable */ +#define PGRE_PPI 0x0000 /* Enable PPI D12:10 */ +#define PGRE_SPORT 0x0400 /* Enable DR1PRI/RFS1/RSCLK1 */ + +#define PGTE 0x0800 /* Port G SPORT1 Transmit Enable */ +#define PGTE_PPI 0x0000 /* Enable PPI D15:13 */ +#define PGTE_SPORT 0x0800 /* Enable DT1PRI/TFS1/TSCLK1 */ + + +/* ****************** HANDSHAKE DMA (HDMA) MASKS *********************/ +/* HDMAx_CTL Masks */ +#define HMDMAEN 0x0001 /* Enable Handshake DMA 0/1 */ +#define REP 0x0002 /* HDMA Request Polarity */ +#define UTE 0x0004 /* Urgency Threshold Enable */ +#define OIE 0x0010 /* Overflow Interrupt Enable */ +#define BDIE 0x0020 /* Block Done Interrupt Enable */ +#define MBDI 0x0040 /* Mask Block Done IRQ If Pending ECNT */ +#define DRQ 0x0300 /* HDMA Request Type */ +#define DRQ_NONE 0x0000 /* No Request */ +#define DRQ_SINGLE 0x0100 /* Channels Request Single */ +#define DRQ_MULTI 0x0200 /* Channels Request Multi (Default) */ +#define DRQ_URGENT 0x0300 /* Channels Request Multi Urgent */ +#define RBC 0x1000 /* Reload BCNT With IBCNT */ +#define PS 0x2000 /* HDMA Pin Status */ +#define OI 0x4000 /* Overflow Interrupt Generated */ +#define BDI 0x8000 /* Block Done Interrupt Generated */ + +/* entry addresses of the user-callable Boot ROM functions */ + +#define _BOOTROM_RESET 0xEF000000 +#define _BOOTROM_FINAL_INIT 0xEF000002 +#define _BOOTROM_DO_MEMORY_DMA 0xEF000006 +#define _BOOTROM_BOOT_DXE_FLASH 0xEF000008 +#define _BOOTROM_BOOT_DXE_SPI 0xEF00000A +#define _BOOTROM_BOOT_DXE_TWI 0xEF00000C +#define _BOOTROM_GET_DXE_ADDRESS_FLASH 0xEF000010 +#define _BOOTROM_GET_DXE_ADDRESS_SPI 0xEF000012 +#define _BOOTROM_GET_DXE_ADDRESS_TWI 0xEF000014 + +/* Alternate Deprecated Macros Provided For Backwards Code Compatibility */ +#define PGDE_UART PFDE_UART +#define PGDE_DMA PFDE_DMA +#define CKELOW SCKELOW + +/* ==== end from defBF534.h ==== */ + +/* HOST Port Registers */ + +#define HOST_CONTROL 0xffc03400 /* HOST Control Register */ +#define HOST_STATUS 0xffc03404 /* HOST Status Register */ +#define HOST_TIMEOUT 0xffc03408 /* HOST Acknowledge Mode Timeout Register */ + +/* Counter Registers */ + +#define CNT_CONFIG 0xffc03500 /* Configuration Register */ +#define CNT_IMASK 0xffc03504 /* Interrupt Mask Register */ +#define CNT_STATUS 0xffc03508 /* Status Register */ +#define CNT_COMMAND 0xffc0350c /* Command Register */ +#define CNT_DEBOUNCE 0xffc03510 /* Debounce Register */ +#define CNT_COUNTER 0xffc03514 /* Counter Register */ +#define CNT_MAX 0xffc03518 /* Maximal Count Register */ +#define CNT_MIN 0xffc0351c /* Minimal Count Register */ + +/* OTP/FUSE Registers */ + +#define OTP_CONTROL 0xffc03600 /* OTP/Fuse Control Register */ +#define OTP_BEN 0xffc03604 /* OTP/Fuse Byte Enable */ +#define OTP_STATUS 0xffc03608 /* OTP/Fuse Status */ +#define OTP_TIMING 0xffc0360c /* OTP/Fuse Access Timing */ + +/* Security Registers */ + +#define SECURE_SYSSWT 0xffc03620 /* Secure System Switches */ +#define SECURE_CONTROL 0xffc03624 /* Secure Control */ +#define SECURE_STATUS 0xffc03628 /* Secure Status */ + +/* OTP Read/Write Data Buffer Registers */ + +#define OTP_DATA0 0xffc03680 /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */ +#define OTP_DATA1 0xffc03684 /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */ +#define OTP_DATA2 0xffc03688 /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */ +#define OTP_DATA3 0xffc0368c /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */ + +/* NFC Registers */ + +#define NFC_CTL 0xffc03700 /* NAND Control Register */ +#define NFC_STAT 0xffc03704 /* NAND Status Register */ +#define NFC_IRQSTAT 0xffc03708 /* NAND Interrupt Status Register */ +#define NFC_IRQMASK 0xffc0370c /* NAND Interrupt Mask Register */ +#define NFC_ECC0 0xffc03710 /* NAND ECC Register 0 */ +#define NFC_ECC1 0xffc03714 /* NAND ECC Register 1 */ +#define NFC_ECC2 0xffc03718 /* NAND ECC Register 2 */ +#define NFC_ECC3 0xffc0371c /* NAND ECC Register 3 */ +#define NFC_COUNT 0xffc03720 /* NAND ECC Count Register */ +#define NFC_RST 0xffc03724 /* NAND ECC Reset Register */ +#define NFC_PGCTL 0xffc03728 /* NAND Page Control Register */ +#define NFC_READ 0xffc0372c /* NAND Read Data Register */ +#define NFC_ADDR 0xffc03740 /* NAND Address Register */ +#define NFC_CMD 0xffc03744 /* NAND Command Register */ +#define NFC_DATA_WR 0xffc03748 /* NAND Data Write Register */ +#define NFC_DATA_RD 0xffc0374c /* NAND Data Read Register */ + +/* ********************************************************** */ +/* SINGLE BIT MACRO PAIRS (bit mask and negated one) */ +/* and MULTI BIT READ MACROS */ +/* ********************************************************** */ + +/* Bit masks for HOST_CONTROL */ + +#define HOST_EN 0x1 /* Host Enable */ +#define nHOST_EN 0x0 +#define HOST_END 0x2 /* Host Endianess */ +#define nHOST_END 0x0 +#define DATA_SIZE 0x4 /* Data Size */ +#define nDATA_SIZE 0x0 +#define HOST_RST 0x8 /* Host Reset */ +#define nHOST_RST 0x0 +#define HRDY_OVR 0x20 /* Host Ready Override */ +#define nHRDY_OVR 0x0 +#define INT_MODE 0x40 /* Interrupt Mode */ +#define nINT_MODE 0x0 +#define BT_EN 0x80 /* Bus Timeout Enable */ +#define nBT_EN 0x0 +#define EHW 0x100 /* Enable Host Write */ +#define nEHW 0x0 +#define EHR 0x200 /* Enable Host Read */ +#define nEHR 0x0 +#define BDR 0x400 /* Burst DMA Requests */ +#define nBDR 0x0 + +/* Bit masks for HOST_STATUS */ + +#define READY 0x1 /* DMA Ready */ +#define nREADY 0x0 +#define FIFOFULL 0x2 /* FIFO Full */ +#define nFIFOFULL 0x0 +#define FIFOEMPTY 0x4 /* FIFO Empty */ +#define nFIFOEMPTY 0x0 +#define COMPLETE 0x8 /* DMA Complete */ +#define nCOMPLETE 0x0 +#define HSHK 0x10 /* Host Handshake */ +#define nHSHK 0x0 +#define TIMEOUT 0x20 /* Host Timeout */ +#define nTIMEOUT 0x0 +#define HIRQ 0x40 /* Host Interrupt Request */ +#define nHIRQ 0x0 +#define ALLOW_CNFG 0x80 /* Allow New Configuration */ +#define nALLOW_CNFG 0x0 +#define DMA_DIR 0x100 /* DMA Direction */ +#define nDMA_DIR 0x0 +#define BTE 0x200 /* Bus Timeout Enabled */ +#define nBTE 0x0 +#define HOSTRD_DONE 0x8000 /* Host Read Completion Interrupt */ +#define nHOSTRD_DONE 0x0 + +/* Bit masks for HOST_TIMEOUT */ + +#define COUNT_TIMEOUT 0x7ff /* Host Timeout count */ + +/* Bit masks for CNT_CONFIG */ + +#define CNTE 0x1 /* Counter Enable */ +#define nCNTE 0x0 +#define DEBE 0x2 /* Debounce Enable */ +#define nDEBE 0x0 +#define CDGINV 0x10 /* CDG Pin Polarity Invert */ +#define nCDGINV 0x0 +#define CUDINV 0x20 /* CUD Pin Polarity Invert */ +#define nCUDINV 0x0 +#define CZMINV 0x40 /* CZM Pin Polarity Invert */ +#define nCZMINV 0x0 +#define CNTMODE 0x700 /* Counter Operating Mode */ +#define ZMZC 0x800 /* CZM Zeroes Counter Enable */ +#define nZMZC 0x0 +#define BNDMODE 0x3000 /* Boundary register Mode */ +#define INPDIS 0x8000 /* CUG and CDG Input Disable */ +#define nINPDIS 0x0 + +/* Bit masks for CNT_IMASK */ + +#define ICIE 0x1 /* Illegal Gray/Binary Code Interrupt Enable */ +#define nICIE 0x0 +#define UCIE 0x2 /* Up count Interrupt Enable */ +#define nUCIE 0x0 +#define DCIE 0x4 /* Down count Interrupt Enable */ +#define nDCIE 0x0 +#define MINCIE 0x8 /* Min Count Interrupt Enable */ +#define nMINCIE 0x0 +#define MAXCIE 0x10 /* Max Count Interrupt Enable */ +#define nMAXCIE 0x0 +#define COV31IE 0x20 /* Bit 31 Overflow Interrupt Enable */ +#define nCOV31IE 0x0 +#define COV15IE 0x40 /* Bit 15 Overflow Interrupt Enable */ +#define nCOV15IE 0x0 +#define CZEROIE 0x80 /* Count to Zero Interrupt Enable */ +#define nCZEROIE 0x0 +#define CZMIE 0x100 /* CZM Pin Interrupt Enable */ +#define nCZMIE 0x0 +#define CZMEIE 0x200 /* CZM Error Interrupt Enable */ +#define nCZMEIE 0x0 +#define CZMZIE 0x400 /* CZM Zeroes Counter Interrupt Enable */ +#define nCZMZIE 0x0 + +/* Bit masks for CNT_STATUS */ + +#define ICII 0x1 /* Illegal Gray/Binary Code Interrupt Identifier */ +#define nICII 0x0 +#define UCII 0x2 /* Up count Interrupt Identifier */ +#define nUCII 0x0 +#define DCII 0x4 /* Down count Interrupt Identifier */ +#define nDCII 0x0 +#define MINCII 0x8 /* Min Count Interrupt Identifier */ +#define nMINCII 0x0 +#define MAXCII 0x10 /* Max Count Interrupt Identifier */ +#define nMAXCII 0x0 +#define COV31II 0x20 /* Bit 31 Overflow Interrupt Identifier */ +#define nCOV31II 0x0 +#define COV15II 0x40 /* Bit 15 Overflow Interrupt Identifier */ +#define nCOV15II 0x0 +#define CZEROII 0x80 /* Count to Zero Interrupt Identifier */ +#define nCZEROII 0x0 +#define CZMII 0x100 /* CZM Pin Interrupt Identifier */ +#define nCZMII 0x0 +#define CZMEII 0x200 /* CZM Error Interrupt Identifier */ +#define nCZMEII 0x0 +#define CZMZII 0x400 /* CZM Zeroes Counter Interrupt Identifier */ +#define nCZMZII 0x0 + +/* Bit masks for CNT_COMMAND */ + +#define W1LCNT 0xf /* Load Counter Register */ +#define W1LMIN 0xf0 /* Load Min Register */ +#define W1LMAX 0xf00 /* Load Max Register */ +#define W1ZMONCE 0x1000 /* Enable CZM Clear Counter Once */ +#define nW1ZMONCE 0x0 + +/* Bit masks for CNT_DEBOUNCE */ + +#define DPRESCALE 0xf /* Load Counter Register */ + +/* Bit masks for OTP_CONTROL */ + +#define FUSE_FADDR 0x1ff /* OTP/Fuse Address */ +#define FIEN 0x800 /* OTP/Fuse Interrupt Enable */ +#define nFIEN 0x0 +#define FTESTDEC 0x1000 /* OTP/Fuse Test Decoder */ +#define nFTESTDEC 0x0 +#define FWRTEST 0x2000 /* OTP/Fuse Write Test */ +#define nFWRTEST 0x0 +#define FRDEN 0x4000 /* OTP/Fuse Read Enable */ +#define nFRDEN 0x0 +#define FWREN 0x8000 /* OTP/Fuse Write Enable */ +#define nFWREN 0x0 + +/* Bit masks for OTP_BEN */ + +#define FBEN 0xffff /* OTP/Fuse Byte Enable */ + +/* Bit masks for OTP_STATUS */ + +#define FCOMP 0x1 /* OTP/Fuse Access Complete */ +#define nFCOMP 0x0 +#define FERROR 0x2 /* OTP/Fuse Access Error */ +#define nFERROR 0x0 +#define MMRGLOAD 0x10 /* Memory Mapped Register Gasket Load */ +#define nMMRGLOAD 0x0 +#define MMRGLOCK 0x20 /* Memory Mapped Register Gasket Lock */ +#define nMMRGLOCK 0x0 +#define FPGMEN 0x40 /* OTP/Fuse Program Enable */ +#define nFPGMEN 0x0 + +/* Bit masks for OTP_TIMING */ + +#define USECDIV 0xff /* Micro Second Divider */ +#define READACC 0x7f00 /* Read Access Time */ +#define CPUMPRL 0x38000 /* Charge Pump Release Time */ +#define CPUMPSU 0xc0000 /* Charge Pump Setup Time */ +#define CPUMPHD 0xf00000 /* Charge Pump Hold Time */ +#define PGMTIME 0xff000000 /* Program Time */ + +/* Bit masks for SECURE_SYSSWT */ + +#define EMUDABL 0x1 /* Emulation Disable. */ +#define nEMUDABL 0x0 +#define RSTDABL 0x2 /* Reset Disable */ +#define nRSTDABL 0x0 +#define L1IDABL 0x1c /* L1 Instruction Memory Disable. */ +#define L1DADABL 0xe0 /* L1 Data Bank A Memory Disable. */ +#define L1DBDABL 0x700 /* L1 Data Bank B Memory Disable. */ +#define DMA0OVR 0x800 /* DMA0 Memory Access Override */ +#define nDMA0OVR 0x0 +#define DMA1OVR 0x1000 /* DMA1 Memory Access Override */ +#define nDMA1OVR 0x0 +#define EMUOVR 0x4000 /* Emulation Override */ +#define nEMUOVR 0x0 +#define OTPSEN 0x8000 /* OTP Secrets Enable. */ +#define nOTPSEN 0x0 +#define L2DABL 0x70000 /* L2 Memory Disable. */ + +/* Bit masks for SECURE_CONTROL */ + +#define SECURE0 0x1 /* SECURE 0 */ +#define nSECURE0 0x0 +#define SECURE1 0x2 /* SECURE 1 */ +#define nSECURE1 0x0 +#define SECURE2 0x4 /* SECURE 2 */ +#define nSECURE2 0x0 +#define SECURE3 0x8 /* SECURE 3 */ +#define nSECURE3 0x0 + +/* Bit masks for SECURE_STATUS */ + +#define SECMODE 0x3 /* Secured Mode Control State */ +#define NMI 0x4 /* Non Maskable Interrupt */ +#define nNMI 0x0 +#define AFVALID 0x8 /* Authentication Firmware Valid */ +#define nAFVALID 0x0 +#define AFEXIT 0x10 /* Authentication Firmware Exit */ +#define nAFEXIT 0x0 +#define SECSTAT 0xe0 /* Secure Status */ + +/* Bit masks for NFC_CTL */ + +#define WR_DLY 0xf /* Write Strobe Delay */ +#define RD_DLY 0xf0 /* Read Strobe Delay */ +#define NWIDTH 0x100 /* NAND Data Width */ +#define nNWIDTH 0x0 +#define PG_SIZE 0x200 /* Page Size */ +#define nPG_SIZE 0x0 + +/* Bit masks for NFC_STAT */ + +#define NBUSY 0x1 /* Not Busy */ +#define nNBUSY 0x0 +#define WB_FULL 0x2 /* Write Buffer Full */ +#define nWB_FULL 0x0 +#define PG_WR_STAT 0x4 /* Page Write Pending */ +#define nPG_WR_STAT 0x0 +#define PG_RD_STAT 0x8 /* Page Read Pending */ +#define nPG_RD_STAT 0x0 +#define WB_EMPTY 0x10 /* Write Buffer Empty */ +#define nWB_EMPTY 0x0 + +/* Bit masks for NFC_IRQSTAT */ + +#define NBUSYIRQ 0x1 /* Not Busy IRQ */ +#define nNBUSYIRQ 0x0 +#define WB_OVF 0x2 /* Write Buffer Overflow */ +#define nWB_OVF 0x0 +#define WB_EDGE 0x4 /* Write Buffer Edge Detect */ +#define nWB_EDGE 0x0 +#define RD_RDY 0x8 /* Read Data Ready */ +#define nRD_RDY 0x0 +#define WR_DONE 0x10 /* Page Write Done */ +#define nWR_DONE 0x0 + +/* Bit masks for NFC_IRQMASK */ + +#define MASK_BUSYIRQ 0x1 /* Mask Not Busy IRQ */ +#define nMASK_BUSYIRQ 0x0 +#define MASK_WBOVF 0x2 /* Mask Write Buffer Overflow */ +#define nMASK_WBOVF 0x0 +#define MASK_WBEMPTY 0x4 /* Mask Write Buffer Empty */ +#define nMASK_WBEMPTY 0x0 +#define MASK_RDRDY 0x8 /* Mask Read Data Ready */ +#define nMASK_RDRDY 0x0 +#define MASK_WRDONE 0x10 /* Mask Write Done */ +#define nMASK_WRDONE 0x0 + +/* Bit masks for NFC_RST */ + +#define ECC_RST 0x1 /* ECC (and NFC counters) Reset */ +#define nECC_RST 0x0 + +/* Bit masks for NFC_PGCTL */ + +#define PG_RD_START 0x1 /* Page Read Start */ +#define nPG_RD_START 0x0 +#define PG_WR_START 0x2 /* Page Write Start */ +#define nPG_WR_START 0x0 + +/* Bit masks for NFC_ECC0 */ + +#define ECC0 0x7ff /* Parity Calculation Result0 */ + +/* Bit masks for NFC_ECC1 */ + +#define ECC1 0x7ff /* Parity Calculation Result1 */ + +/* Bit masks for NFC_ECC2 */ + +#define ECC2 0x7ff /* Parity Calculation Result2 */ + +/* Bit masks for NFC_ECC3 */ + +#define ECC3 0x7ff /* Parity Calculation Result3 */ + +/* Bit masks for NFC_COUNT */ + +#define ECCCNT 0x3ff /* Transfer Count */ + + +#endif /* _DEF_BF52X_H */ diff --git a/include/asm-blackfin/mach-bf533/cdefBF532.h b/include/asm-blackfin/mach-bf533/cdefBF532.h index 1d7c494ceb6460..74f967b235e2a7 100644 --- a/include/asm-blackfin/mach-bf533/cdefBF532.h +++ b/include/asm-blackfin/mach-bf533/cdefBF532.h @@ -51,10 +51,6 @@ #define bfin_read_PLL_LOCKCNT() bfin_read16(PLL_LOCKCNT) #define bfin_write_PLL_LOCKCNT(val) bfin_write16(PLL_LOCKCNT,val) #define bfin_read_CHIPID() bfin_read32(CHIPID) -#define bfin_read_SWRST() bfin_read16(SWRST) -#define bfin_write_SWRST(val) bfin_write16(SWRST,val) -#define bfin_read_SYSCR() bfin_read16(SYSCR) -#define bfin_write_SYSCR(val) bfin_write16(SYSCR,val) #define bfin_read_PLL_DIV() bfin_read16(PLL_DIV) #define bfin_write_PLL_DIV(val) bfin_write16(PLL_DIV,val) #define bfin_read_VR_CTL() bfin_read16(VR_CTL) @@ -63,12 +59,14 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) { unsigned long flags, iwr; - bfin_write16(VR_CTL, val); - __builtin_bfin_ssync(); /* Enable the PLL Wakeup bit in SIC IWR */ iwr = bfin_read32(SIC_IWR); /* Only allow PPL Wakeup) */ bfin_write32(SIC_IWR, IWR_ENABLE(0)); + + bfin_write16(VR_CTL, val); + __builtin_bfin_ssync(); + local_irq_save(flags); asm("IDLE;"); local_irq_restore(flags); @@ -76,6 +74,10 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) } /* System Interrupt Controller (0xFFC0 0C00-0xFFC0 0FFF) */ +#define bfin_read_SWRST() bfin_read16(SWRST) +#define bfin_write_SWRST(val) bfin_write16(SWRST,val) +#define bfin_read_SYSCR() bfin_read16(SYSCR) +#define bfin_write_SYSCR(val) bfin_write16(SYSCR,val) #define bfin_read_SIC_IAR0() bfin_read32(SIC_IAR0) #define bfin_write_SIC_IAR0(val) bfin_write32(SIC_IAR0,val) #define bfin_read_SIC_IAR1() bfin_read32(SIC_IAR1) @@ -115,6 +117,18 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) #define bfin_read_RTC_PREN() bfin_read16(RTC_PREN) #define bfin_write_RTC_PREN(val) bfin_write16(RTC_PREN,val) +/* DMA Traffic controls */ +#define bfin_read_DMA_TCPER() bfin_read16(DMA_TCPER) +#define bfin_write_DMA_TCPER(val) bfin_write16(DMA_TCPER,val) +#define bfin_read_DMA_TCCNT() bfin_read16(DMA_TCCNT) +#define bfin_write_DMA_TCCNT(val) bfin_write16(DMA_TCCNT,val) + +/* Alternate deprecated register names (below) provided for backwards code compatibility */ +#define bfin_read_DMA_TC_PER() bfin_read16(DMA_TC_PER) +#define bfin_write_DMA_TC_PER(val) bfin_write16(DMA_TC_PER,val) +#define bfin_read_DMA_TC_CNT() bfin_read16(DMA_TC_CNT) +#define bfin_write_DMA_TC_CNT(val) bfin_write16(DMA_TC_CNT,val) + /* General Purpose IO (0xFFC0 2400-0xFFC0 27FF) */ #define bfin_read_FIO_DIR() bfin_read16(FIO_DIR) #define bfin_write_FIO_DIR(val) bfin_write16(FIO_DIR,val) @@ -151,16 +165,6 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) #define bfin_read_FIO_MASKB_T() bfin_read16(FIO_MASKB_T) #define bfin_write_FIO_MASKB_T(val) bfin_write16(FIO_MASKB_T,val) -/* DMA Traffic controls */ -#define bfin_read_DMA_TCPER() bfin_read16(DMA_TCPER) -#define bfin_write_DMA_TCPER(val) bfin_write16(DMA_TCPER,val) -#define bfin_read_DMA_TCCNT() bfin_read16(DMA_TCCNT) -#define bfin_write_DMA_TCCNT(val) bfin_write16(DMA_TCCNT,val) -#define bfin_read_DMA_TC_PER() bfin_read16(DMA_TC_PER) -#define bfin_write_DMA_TC_PER(val) bfin_write16(DMA_TC_PER,val) -#define bfin_read_DMA_TC_CNT() bfin_read16(DMA_TC_CNT) -#define bfin_write_DMA_TC_CNT(val) bfin_write16(DMA_TC_CNT,val) - /* DMA Controller */ #define bfin_read_DMA0_CONFIG() bfin_read16(DMA0_CONFIG) #define bfin_write_DMA0_CONFIG(val) bfin_write16(DMA0_CONFIG,val) diff --git a/include/asm-blackfin/mach-bf533/defBF532.h b/include/asm-blackfin/mach-bf533/defBF532.h index b240a082aa0943..6a3cf93f8b577c 100644 --- a/include/asm-blackfin/mach-bf533/defBF532.h +++ b/include/asm-blackfin/mach-bf533/defBF532.h @@ -46,11 +46,7 @@ #ifndef _DEF_BF532_H #define _DEF_BF532_H -/* -#if !defined(__ADSPLPBLACKFIN__) -#warning defBF532.h should only be included for 532 compatible chips -#endif -*/ + /* include all Core registers and bit definitions */ #include <asm/mach-common/def_LPBlackfin.h> @@ -65,10 +61,10 @@ #define PLL_STAT 0xFFC0000C /* PLL Status register (16-bit) */ #define PLL_LOCKCNT 0xFFC00010 /* PLL Lock Count register (16-bit) */ #define CHIPID 0xFFC00014 /* Chip ID Register */ -#define SWRST 0xFFC00100 /* Software Reset Register (16-bit) */ -#define SYSCR 0xFFC00104 /* System Configuration registe */ /* System Interrupt Controller (0xFFC00100 - 0xFFC001FF) */ +#define SWRST 0xFFC00100 /* Software Reset Register (16-bit) */ +#define SYSCR 0xFFC00104 /* System Configuration registe */ #define SIC_RVECT 0xFFC00108 /* Interrupt Reset Vector Address Register */ #define SIC_IMASK 0xFFC0010C /* Interrupt Mask Register */ #define SIC_IAR0 0xFFC00110 /* Interrupt Assignment Register 0 */ @@ -218,11 +214,13 @@ #define EBIU_SDSTAT 0xFFC00A1C /* SDRAM Status Register */ /* DMA Traffic controls */ -#define DMA_TCPER 0xFFC00B0C /* Traffic Control Periods Register */ -#define DMA_TCCNT 0xFFC00B10 /* Traffic Control Current Counts Register */ #define DMA_TC_PER 0xFFC00B0C /* Traffic Control Periods Register */ #define DMA_TC_CNT 0xFFC00B10 /* Traffic Control Current Counts Register */ +/* Alternate deprecated register names (below) provided for backwards code compatibility */ +#define DMA_TCPER 0xFFC00B0C /* Traffic Control Periods Register */ +#define DMA_TCCNT 0xFFC00B10 /* Traffic Control Current Counts Register */ + /* DMA Controller (0xFFC00C00 - 0xFFC00FFF) */ #define DMA0_CONFIG 0xFFC00C08 /* DMA Channel 0 Configuration Register */ #define DMA0_NEXT_DESC_PTR 0xFFC00C00 /* DMA Channel 0 Next Descriptor Pointer Register */ @@ -407,14 +405,25 @@ /* ********************* PLL AND RESET MASKS ************************ */ /* PLL_CTL Masks */ -#define PLL_CLKIN 0x00000000 /* Pass CLKIN to PLL */ -#define PLL_CLKIN_DIV2 0x00000001 /* Pass CLKIN/2 to PLL */ -#define PLL_OFF 0x00000002 /* Shut off PLL clocks */ -#define STOPCK_OFF 0x00000008 /* Core clock off */ -#define PDWN 0x00000020 /* Put the PLL in a Deep Sleep state */ -#define BYPASS 0x00000100 /* Bypass the PLL */ +#define PLL_CLKIN 0x0000 /* Pass CLKIN to PLL */ +#define PLL_CLKIN_DIV2 0x0001 /* Pass CLKIN/2 to PLL */ +#define DF 0x0001 /* 0: PLL = CLKIN, 1: PLL = CLKIN/2 */ +#define PLL_OFF 0x0002 /* Shut off PLL clocks */ +#define STOPCK_OFF 0x0008 /* Core clock off */ +#define STOPCK 0x0008 /* Core Clock Off */ +#define PDWN 0x0020 /* Put the PLL in a Deep Sleep state */ +#if !defined(__ADSPBF538__) +/* this file is included in defBF538.h but IN_DELAY/OUT_DELAY are different */ +# define IN_DELAY 0x0040 /* Add 200ps Delay To EBIU Input Latches */ +# define OUT_DELAY 0x0080 /* Add 200ps Delay To EBIU Output Signals */ +#endif +#define BYPASS 0x0100 /* Bypass the PLL */ +/* PLL_CTL Macros (Only Use With Logic OR While Setting Lower Order Bits) */ +#define SET_MSEL(x) (((x)&0x3F) << 0x9) /* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */ /* PLL_DIV Masks */ +#define SSEL 0x000F /* System Select */ +#define CSEL 0x0030 /* Core Select */ #define SCLK_DIV(x) (x) /* SCLK = VCO / x */ @@ -422,6 +431,8 @@ #define CCLK_DIV2 0x00000010 /* CCLK = VCO / 2 */ #define CCLK_DIV4 0x00000020 /* CCLK = VCO / 4 */ #define CCLK_DIV8 0x00000030 /* CCLK = VCO / 8 */ +/* PLL_DIV Macros */ +#define SET_SSEL(x) ((x)&0xF) /* Set SSEL = 0-15 --> SCLK = VCO/SSEL */ /* PLL_STAT Masks */ #define ACTIVE_PLLENABLED 0x0001 /* Processor In Active Mode With PLL Enabled */ @@ -429,13 +440,47 @@ #define ACTIVE_PLLDISABLED 0x0004 /* Processor In Active Mode With PLL Disabled */ #define PLL_LOCKED 0x0020 /* PLL_LOCKCNT Has Been Reached */ +/* VR_CTL Masks */ +#define FREQ 0x0003 /* Switching Oscillator Frequency For Regulator */ +#define HIBERNATE 0x0000 /* Powerdown/Bypass On-Board Regulation */ +#define FREQ_333 0x0001 /* Switching Frequency Is 333 kHz */ +#define FREQ_667 0x0002 /* Switching Frequency Is 667 kHz */ +#define FREQ_1000 0x0003 /* Switching Frequency Is 1 MHz */ + +#define GAIN 0x000C /* Voltage Level Gain */ +#define GAIN_5 0x0000 /* GAIN = 5 */ +#define GAIN_10 0x0004 /* GAIN = 10 */ +#define GAIN_20 0x0008 /* GAIN = 20 */ +#define GAIN_50 0x000C /* GAIN = 50 */ + +#define VLEV 0x00F0 /* Internal Voltage Level */ +#define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */ +#define VLEV_090 0x0070 /* VLEV = 0.90 V (-5% - +10% Accuracy) */ +#define VLEV_095 0x0080 /* VLEV = 0.95 V (-5% - +10% Accuracy) */ +#define VLEV_100 0x0090 /* VLEV = 1.00 V (-5% - +10% Accuracy) */ +#define VLEV_105 0x00A0 /* VLEV = 1.05 V (-5% - +10% Accuracy) */ +#define VLEV_110 0x00B0 /* VLEV = 1.10 V (-5% - +10% Accuracy) */ +#define VLEV_115 0x00C0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */ +#define VLEV_120 0x00D0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */ + +#define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */ +#define SCKELOW 0x8000 /* Do Not Drive SCKE High During Reset After Hibernate */ + /* CHIPID Masks */ #define CHIPID_VERSION 0xF0000000 #define CHIPID_FAMILY 0x0FFFF000 #define CHIPID_MANUFACTURE 0x00000FFE /* SWRST Mask */ -#define SYSTEM_RESET 0x00000007 /* Initiates a system software reset */ +#define SYSTEM_RESET 0x0007 /* Initiates A System Software Reset */ +#define DOUBLE_FAULT 0x0008 /* Core Double Fault Causes Reset */ +#define RESET_DOUBLE 0x2000 /* SW Reset Generated By Core Double-Fault */ +#define RESET_WDOG 0x4000 /* SW Reset Generated By Watchdog Timer */ +#define RESET_SOFTWARE 0x8000 /* SW Reset Occurred Since Last Read Of SWRST */ + +/* SYSCR Masks */ +#define BMODE 0x0006 /* Boot Mode - Latched During HW Reset From Mode Pins */ +#define NOBOOT 0x0010 /* Execute From L1 or ASYNC Bank 0 When BMODE = 0 */ /* ************* SYSTEM INTERRUPT CONTROLLER MASKS ***************** */ @@ -483,23 +528,6 @@ #define IWR_ENABLE(x) (1 << (x)) /* Wakeup Enable Peripheral #x */ #define IWR_DISABLE(x) (0xFFFFFFFF ^ (1 << (x))) /* Wakeup Disable Peripheral #x */ -/* ********* WATCHDOG TIMER MASKS ********************8 */ - -/* Watchdog Timer WDOG_CTL Register */ -#define ICTL(x) ((x<<1) & 0x0006) -#define ENABLE_RESET 0x00000000 /* Set Watchdog Timer to generate reset */ -#define ENABLE_NMI 0x00000002 /* Set Watchdog Timer to generate non-maskable interrupt */ -#define ENABLE_GPI 0x00000004 /* Set Watchdog Timer to generate general-purpose interrupt */ -#define DISABLE_EVT 0x00000006 /* Disable Watchdog Timer interrupts */ - -#define TMR_EN 0x0000 -#define TMR_DIS 0x0AD0 -#define TRO 0x8000 - -#define ICTL_P0 0x01 -#define ICTL_P1 0x02 -#define TRO_P 0x0F - /* ***************************** UART CONTROLLER MASKS ********************** */ /* UART_LCR Register */ @@ -583,6 +611,9 @@ #define TSPEN 0x0001 /* TX enable */ #define ITCLK 0x0002 /* Internal TX Clock Select */ #define TDTYPE 0x000C /* TX Data Formatting Select */ +#define DTYPE_NORM 0x0000 /* Data Format Normal */ +#define DTYPE_ULAW 0x0008 /* Compand Using u-Law */ +#define DTYPE_ALAW 0x000C /* Compand Using A-Law */ #define TLSBIT 0x0010 /* TX Bit Order */ #define ITFS 0x0200 /* Internal TX Frame Sync Select */ #define TFSR 0x0400 /* TX Frame Sync Required Select */ @@ -592,7 +623,12 @@ #define TCKFE 0x4000 /* TX Clock Falling Edge Select */ /* SPORTx_TCR2 Masks */ -#define SLEN 0x001F /*TX Word Length */ +#if defined(__ADSPBF531__) || defined(__ADSPBF532__) || \ + defined(__ADSPBF533__) +# define SLEN 0x001F /*TX Word Length */ +#else +# define SLEN(x) ((x)&0x1F) /* SPORT TX Word Length (2 - 31) */ +#endif #define TXSE 0x0100 /*TX Secondary Enable */ #define TSFSE 0x0200 /*TX Stereo Frame Sync Enable */ #define TRFST 0x0400 /*TX Right-First Data Order */ @@ -601,8 +637,9 @@ #define RSPEN 0x0001 /* RX enable */ #define IRCLK 0x0002 /* Internal RX Clock Select */ #define RDTYPE 0x000C /* RX Data Formatting Select */ -#define RULAW 0x0008 /* u-Law enable */ -#define RALAW 0x000C /* A-Law enable */ +#define DTYPE_NORM 0x0000 /* no companding */ +#define DTYPE_ULAW 0x0008 /* Compand Using u-Law */ +#define DTYPE_ALAW 0x000C /* Compand Using A-Law */ #define RLSBIT 0x0010 /* RX Bit Order */ #define IRFS 0x0200 /* Internal RX Frame Sync Select */ #define RFSR 0x0400 /* RX Frame Sync Required Select */ @@ -611,7 +648,7 @@ #define RCKFE 0x4000 /* RX Clock Falling Edge Select */ /* SPORTx_RCR2 Masks */ -#define SLEN 0x001F /*RX Word Length */ +/* SLEN defined above */ #define RXSE 0x0100 /*RX Secondary Enable */ #define RSFSE 0x0200 /*RX Stereo Frame Sync Enable */ #define RRFST 0x0400 /*Right-First Data Order */ @@ -628,14 +665,37 @@ /*SPORTx_MCMC1 Masks */ #define SP_WSIZE 0x0000F000 /*Multichannel Window Size Field */ #define SP_WOFF 0x000003FF /*Multichannel Window Offset Field */ +/* SPORTx_MCMC1 Macros */ +#define SET_SP_WOFF(x) ((x) & 0x3FF) /* Multichannel Window Offset Field */ +/* Only use SET_WSIZE Macro With Logic OR While Setting Lower Order Bits */ +#define SET_SP_WSIZE(x) (((((x)>>0x3)-1)&0xF) << 0xC) /* Multichannel Window Size = (x/8)-1 */ /*SPORTx_MCMC2 Masks */ -#define MCCRM 0x00000003 /*Multichannel Clock Recovery Mode */ -#define MCDTXPE 0x00000004 /*Multichannel DMA Transmit Packing */ -#define MCDRXPE 0x00000008 /*Multichannel DMA Receive Packing */ -#define MCMEN 0x00000010 /*Multichannel Frame Mode Enable */ -#define FSDR 0x00000080 /*Multichannel Frame Sync to Data Relationship */ -#define MFD 0x0000F000 /*Multichannel Frame Delay */ +#define MCCRM 0x00000003 /*Multichannel Clock Recovery Mode */ +#define REC_BYPASS 0x0000 /* Bypass Mode (No Clock Recovery) */ +#define REC_2FROM4 0x0002 /* Recover 2 MHz Clock from 4 MHz Clock */ +#define REC_8FROM16 0x0003 /* Recover 8 MHz Clock from 16 MHz Clock */ +#define MCDTXPE 0x00000004 /*Multichannel DMA Transmit Packing */ +#define MCDRXPE 0x00000008 /*Multichannel DMA Receive Packing */ +#define MCMEN 0x00000010 /*Multichannel Frame Mode Enable */ +#define FSDR 0x00000080 /*Multichannel Frame Sync to Data Relationship */ +#define MFD 0x0000F000 /*Multichannel Frame Delay */ +#define MFD_0 0x0000 /* Multichannel Frame Delay = 0 */ +#define MFD_1 0x1000 /* Multichannel Frame Delay = 1 */ +#define MFD_2 0x2000 /* Multichannel Frame Delay = 2 */ +#define MFD_3 0x3000 /* Multichannel Frame Delay = 3 */ +#define MFD_4 0x4000 /* Multichannel Frame Delay = 4 */ +#define MFD_5 0x5000 /* Multichannel Frame Delay = 5 */ +#define MFD_6 0x6000 /* Multichannel Frame Delay = 6 */ +#define MFD_7 0x7000 /* Multichannel Frame Delay = 7 */ +#define MFD_8 0x8000 /* Multichannel Frame Delay = 8 */ +#define MFD_9 0x9000 /* Multichannel Frame Delay = 9 */ +#define MFD_10 0xA000 /* Multichannel Frame Delay = 10 */ +#define MFD_11 0xB000 /* Multichannel Frame Delay = 11 */ +#define MFD_12 0xC000 /* Multichannel Frame Delay = 12 */ +#define MFD_13 0xD000 /* Multichannel Frame Delay = 13 */ +#define MFD_14 0xE000 /* Multichannel Frame Delay = 14 */ +#define MFD_15 0xF000 /* Multichannel Frame Delay = 15 */ /* ********* PARALLEL PERIPHERAL INTERFACE (PPI) MASKS **************** */ @@ -660,6 +720,8 @@ #define DLEN_16 0x3800 /* Data Length = 16 Bits */ #define DLEN(x) (((x-9) & 0x07) << 11) /* PPI Data Length (only works for x=10-->x=16) */ #define POL 0x0000C000 /* PPI Signal Polarities */ +#define POLC 0x4000 /* PPI Clock Polarity */ +#define POLS 0x8000 /* PPI Frame Sync Polarity */ /* PPI_STATUS Masks */ #define FLD 0x00000400 /* Field Indicator */ @@ -729,6 +791,15 @@ #define PCAPRD 0x00000800 /* DMA Read Operation Indicator */ #define PMAP 0x00007000 /* DMA Peripheral Map Field */ +#define PMAP_PPI 0x0000 /* PMAP PPI Port DMA */ +#define PMAP_SPORT0RX 0x1000 /* PMAP SPORT0 Receive DMA */ +#define PMAP_SPORT0TX 0x2000 /* PMAP SPORT0 Transmit DMA */ +#define PMAP_SPORT1RX 0x3000 /* PMAP SPORT1 Receive DMA */ +#define PMAP_SPORT1TX 0x4000 /* PMAP SPORT1 Transmit DMA */ +#define PMAP_SPI 0x5000 /* PMAP SPI DMA */ +#define PMAP_UARTRX 0x6000 /* PMAP UART Receive DMA */ +#define PMAP_UARTTX 0x7000 /* PMAP UART Transmit DMA */ + /* ************* GENERAL PURPOSE TIMER MASKS ******************** */ /* PWM Timer bit definitions */ @@ -755,9 +826,9 @@ #define TIMIL0 0x0001 #define TIMIL1 0x0002 #define TIMIL2 0x0004 -#define TOVL_ERR0 0x0010 -#define TOVL_ERR1 0x0020 -#define TOVL_ERR2 0x0040 +#define TOVF_ERR0 0x0010 /* Timer 0 Counter Overflow */ +#define TOVF_ERR1 0x0020 /* Timer 1 Counter Overflow */ +#define TOVF_ERR2 0x0040 /* Timer 2 Counter Overflow */ #define TRUN0 0x1000 #define TRUN1 0x2000 #define TRUN2 0x4000 @@ -765,13 +836,21 @@ #define TIMIL0_P 0x00 #define TIMIL1_P 0x01 #define TIMIL2_P 0x02 -#define TOVL_ERR0_P 0x04 -#define TOVL_ERR1_P 0x05 -#define TOVL_ERR2_P 0x06 +#define TOVF_ERR0_P 0x04 +#define TOVF_ERR1_P 0x05 +#define TOVF_ERR2_P 0x06 #define TRUN0_P 0x0C #define TRUN1_P 0x0D #define TRUN2_P 0x0E +/* Alternate Deprecated Macros Provided For Backwards Code Compatibility */ +#define TOVL_ERR0 TOVF_ERR0 +#define TOVL_ERR1 TOVF_ERR1 +#define TOVL_ERR2 TOVF_ERR2 +#define TOVL_ERR0_P TOVF_ERR0_P +#define TOVL_ERR1_P TOVF_ERR1_P +#define TOVL_ERR2_P TOVF_ERR2_P + /* TIMERx_CONFIG Registers */ #define PWM_OUT 0x0001 #define WDTH_CAP 0x0002 @@ -841,6 +920,10 @@ /* SPI_CTL Masks */ #define TIMOD 0x00000003 /* Transfer initiation mode and interrupt generation */ +#define RDBR_CORE 0x0000 /* RDBR Read Initiates, IRQ When RDBR Full */ +#define TDBR_CORE 0x0001 /* TDBR Write Initiates, IRQ When TDBR Empty */ +#define RDBR_DMA 0x0002 /* DMA Read, DMA Until FIFO Empty */ +#define TDBR_DMA 0x0003 /* DMA Write, DMA Until FIFO Full */ #define SZ 0x00000004 /* Send Zero (=0) or last (=1) word when TDBR empty. */ #define GM 0x00000008 /* When RDBR full, get more (=1) data or discard (=0) incoming Data */ #define PSSE 0x00000010 /* Enable (=1) Slave-Select input for Master. */ @@ -894,10 +977,20 @@ #define RXS 0x00000020 /* SPI_RDBR Data Buffer Status (0=Empty, 1=Full) */ #define TXCOL 0x00000040 /* When set (=1), corrupt data may have been transmitted */ +/* SPIx_FLG Masks */ +#define FLG1E 0xFDFF /* Activates SPI_FLOUT1 */ +#define FLG2E 0xFBFF /* Activates SPI_FLOUT2 */ +#define FLG3E 0xF7FF /* Activates SPI_FLOUT3 */ +#define FLG4E 0xEFFF /* Activates SPI_FLOUT4 */ +#define FLG5E 0xDFFF /* Activates SPI_FLOUT5 */ +#define FLG6E 0xBFFF /* Activates SPI_FLOUT6 */ +#define FLG7E 0x7FFF /* Activates SPI_FLOUT7 */ + /* ********************* ASYNCHRONOUS MEMORY CONTROLLER MASKS ************* */ /* AMGCTL Masks */ #define AMCKEN 0x00000001 /* Enable CLKOUT */ +#define AMBEN_NONE 0x00000000 /* All Banks Disabled */ #define AMBEN_B0 0x00000002 /* Enable Asynchronous Memory Bank 0 only */ #define AMBEN_B0_B1 0x00000004 /* Enable Asynchronous Memory Banks 0 & 1 only */ #define AMBEN_B0_B1_B2 0x00000006 /* Enable Asynchronous Memory Banks 0, 1, and 2 */ @@ -1097,6 +1190,9 @@ #define CL_3 0x0000000C /* SDRAM CAS latency = 3 cycles */ #define PFE 0x00000010 /* Enable SDRAM prefetch */ #define PFP 0x00000020 /* Prefetch has priority over AMC requests */ +#define PASR_ALL 0x00000000 /* All 4 SDRAM Banks Refreshed In Self-Refresh */ +#define PASR_B0_B1 0x00000010 /* SDRAM Banks 0 and 1 Are Refreshed In Self-Refresh */ +#define PASR_B0 0x00000020 /* Only SDRAM Bank 0 Is Refreshed In Self-Refresh */ #define TRAS_1 0x00000040 /* SDRAM tRAS = 1 cycle */ #define TRAS_2 0x00000080 /* SDRAM tRAS = 2 cycles */ #define TRAS_3 0x000000C0 /* SDRAM tRAS = 3 cycles */ @@ -1158,18 +1254,5 @@ #define SDEASE 0x00000010 /* SDRAM EAB sticky error status - W1C */ #define BGSTAT 0x00000020 /* Bus granted */ -/*VR_CTL Masks*/ -#define WAKE 0x100 -#define VLEV_6 0x60 -#define VLEV_7 0x70 -#define VLEV_8 0x80 -#define VLEV_9 0x90 -#define VLEV_10 0xA0 -#define VLEV_11 0xB0 -#define VLEV_12 0xC0 -#define VLEV_13 0xD0 -#define VLEV_14 0xE0 -#define VLEV_15 0xF0 -#define FREQ_3 0x03 #endif /* _DEF_BF532_H */ diff --git a/include/asm-blackfin/mach-bf537/cdefBF534.h b/include/asm-blackfin/mach-bf537/cdefBF534.h index 7b658c175f85e0..84e58fa73dce84 100644 --- a/include/asm-blackfin/mach-bf537/cdefBF534.h +++ b/include/asm-blackfin/mach-bf537/cdefBF534.h @@ -51,12 +51,14 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) { unsigned long flags, iwr; - bfin_write16(VR_CTL, val); - __builtin_bfin_ssync(); /* Enable the PLL Wakeup bit in SIC IWR */ iwr = bfin_read32(SIC_IWR); /* Only allow PPL Wakeup) */ bfin_write32(SIC_IWR, IWR_ENABLE(0)); + + bfin_write16(VR_CTL, val); + __builtin_bfin_ssync(); + local_irq_save(flags); asm("IDLE;"); local_irq_restore(flags); @@ -73,7 +75,6 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) #define bfin_write_SWRST(val) bfin_write16(SWRST,val) #define bfin_read_SYSCR() bfin_read16(SYSCR) #define bfin_write_SYSCR(val) bfin_write16(SYSCR,val) -#define pSIC_RVECT ((void * volatile *)SIC_RVECT) #define bfin_read_SIC_RVECT() bfin_read32(SIC_RVECT) #define bfin_write_SIC_RVECT(val) bfin_write32(SIC_RVECT,val) #define bfin_read_SIC_IMASK() bfin_read32(SIC_IMASK) @@ -398,10 +399,14 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) #define bfin_write_EBIU_SDSTAT(val) bfin_write16(EBIU_SDSTAT,val) /* DMA Traffic Control Registers */ -#define pDMA_TCPER ((volatile unsigned short *)DMA_TCPER) +#define bfin_read_DMA_TC_PER() bfin_read16(DMA_TC_PER) +#define bfin_write_DMA_TC_PER(val) bfin_write16(DMA_TC_PER,val) +#define bfin_read_DMA_TC_CNT() bfin_read16(DMA_TC_CNT) +#define bfin_write_DMA_TC_CNT(val) bfin_write16(DMA_TC_CNT,val) + +/* Alternate deprecated register names (below) provided for backwards code compatibility */ #define bfin_read_DMA_TCPER() bfin_read16(DMA_TCPER) #define bfin_write_DMA_TCPER(val) bfin_write16(DMA_TCPER,val) -#define pDMA_TCCNT ((volatile unsigned short *)DMA_TCCNT) #define bfin_read_DMA_TCCNT() bfin_read16(DMA_TCCNT) #define bfin_write_DMA_TCCNT(val) bfin_write16(DMA_TCCNT,val) @@ -1076,8 +1081,6 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) #define bfin_write_CAN_UCRC(val) bfin_write16(CAN_UCRC,val) #define bfin_read_CAN_UCCNF() bfin_read16(CAN_UCCNF) #define bfin_write_CAN_UCCNF(val) bfin_write16(CAN_UCCNF,val) -#define bfin_read_CAN_SFCMVER2() bfin_read16(CAN_SFCMVER2) -#define bfin_write_CAN_SFCMVER2(val) bfin_write16(CAN_SFCMVER2,val) /* Mailbox Acceptance Masks */ #define bfin_read_CAN_AM00L() bfin_read16(CAN_AM00L) diff --git a/include/asm-blackfin/mach-bf537/cdefBF537.h b/include/asm-blackfin/mach-bf537/cdefBF537.h index 932a1b6b5d147e..b8fc949a991ff1 100644 --- a/include/asm-blackfin/mach-bf537/cdefBF537.h +++ b/include/asm-blackfin/mach-bf537/cdefBF537.h @@ -40,7 +40,6 @@ /* Include Macro "Defines" For EMAC (Unique to BF536/BF537 */ /* 10/100 Ethernet Controller (0xFFC03000 - 0xFFC031FF) */ -#define pEMAC_OPMODE ((volatile unsigned long *)EMAC_OPMODE) #define bfin_read_EMAC_OPMODE() bfin_read32(EMAC_OPMODE) #define bfin_write_EMAC_OPMODE(val) bfin_write32(EMAC_OPMODE,val) #define bfin_read_EMAC_ADDRLO() bfin_read32(EMAC_ADDRLO) @@ -80,7 +79,6 @@ #define bfin_read_EMAC_WKUP_FFCRC1() bfin_read32(EMAC_WKUP_FFCRC1) #define bfin_write_EMAC_WKUP_FFCRC1(val) bfin_write32(EMAC_WKUP_FFCRC1,val) -#define pEMAC_SYSCTL ((volatile unsigned long *)EMAC_SYSCTL) #define bfin_read_EMAC_SYSCTL() bfin_read32(EMAC_SYSCTL) #define bfin_write_EMAC_SYSCTL(val) bfin_write32(EMAC_SYSCTL,val) #define bfin_read_EMAC_SYSTAT() bfin_read32(EMAC_SYSTAT) @@ -147,7 +145,6 @@ #define bfin_write_EMAC_RXC_SHORT(val) bfin_write32(EMAC_RXC_SHORT,val) #define bfin_read_EMAC_RXC_EQ64() bfin_read32(EMAC_RXC_EQ64) #define bfin_write_EMAC_RXC_EQ64(val) bfin_write32(EMAC_RXC_EQ64,val) -#define pEMAC_RXC_LT128 ((volatile unsigned long *)EMAC_RXC_LT128) #define bfin_read_EMAC_RXC_LT128() bfin_read32(EMAC_RXC_LT128) #define bfin_write_EMAC_RXC_LT128(val) bfin_write32(EMAC_RXC_LT128,val) #define bfin_read_EMAC_RXC_LT256() bfin_read32(EMAC_RXC_LT256) diff --git a/include/asm-blackfin/mach-bf537/defBF534.h b/include/asm-blackfin/mach-bf537/defBF534.h index e605e970900492..1859f2fee5a732 100644 --- a/include/asm-blackfin/mach-bf537/defBF534.h +++ b/include/asm-blackfin/mach-bf537/defBF534.h @@ -216,8 +216,12 @@ #define EBIU_SDSTAT 0xFFC00A1C /* SDRAM Status Register */ /* DMA Traffic Control Registers */ -#define DMA_TCPER 0xFFC00B0C /* Traffic Control Periods Register */ -#define DMA_TCCNT 0xFFC00B10 /* Traffic Control Current Counts Register */ +#define DMA_TC_PER 0xFFC00B0C /* Traffic Control Periods Register */ +#define DMA_TC_CNT 0xFFC00B10 /* Traffic Control Current Counts Register */ + +/* Alternate deprecated register names (below) provided for backwards code compatibility */ +#define DMA_TCPER 0xFFC00B0C /* Traffic Control Periods Register */ +#define DMA_TCCNT 0xFFC00B10 /* Traffic Control Current Counts Register */ /* DMA Controller (0xFFC00C00 - 0xFFC00FFF) */ #define DMA0_NEXT_DESC_PTR 0xFFC00C00 /* DMA Channel 0 Next Descriptor Pointer Register */ @@ -563,7 +567,7 @@ #define CAN_GIF 0xFFC02A9C /* Global Interrupt Flag Register */ #define CAN_CONTROL 0xFFC02AA0 /* Master Control Register */ #define CAN_INTR 0xFFC02AA4 /* Interrupt Pending Register */ -#define CAN_SFCMVER 0xFFC02AA8 /* Version Code Register */ + #define CAN_MBTD 0xFFC02AAC /* Mailbox Temporary Disable Feature */ #define CAN_EWR 0xFFC02AB0 /* Programmable Warning Level */ #define CAN_ESR 0xFFC02AB4 /* Error Status Register */ @@ -1026,10 +1030,11 @@ #define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */ #define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */ -#define PHYWE 0x0200 /* Enable PHY Wakeup From Hibernate */ -#define CANWE 0x0400 /* Enable CAN Wakeup From Hibernate */ -#define PHYCLKOE 0x4000 /* PHY Clock Output Enable */ -#define CKELOW 0x8000 /* Enable Drive CKE Low During Reset */ +#define CANWE 0x0200 /* Enable CAN Wakeup From Hibernate */ +#define PHYWE 0x0400 /* Enable PHY Wakeup From Hibernate */ +#define CLKBUFOE 0x4000 /* CLKIN Buffer Output Enable */ +#define PHYCLKOE CLKBUFOE /* Alternative legacy name for the above */ +#define SCKELOW 0x8000 /* Enable Drive CKE Low During Reset */ /* PLL_STAT Masks */ #define ACTIVE_PLLENABLED 0x0001 /* Processor In Active Mode With PLL Enabled */ @@ -1050,7 +1055,7 @@ #define RESET_SOFTWARE 0x8000 /* SW Reset Occurred Since Last Read Of SWRST */ /* SYSCR Masks */ -#define BMODE 0x0006 /* Boot Mode - Latched During HW Reset From Mode Pins */ +#define BMODE 0x0007 /* Boot Mode - Latched During HW Reset From Mode Pins */ #define NOBOOT 0x0010 /* Execute From L1 or ASYNC Bank 0 When BMODE = 0 */ /* ************* SYSTEM INTERRUPT CONTROLLER MASKS *************************************/ @@ -1107,19 +1112,9 @@ #define IWR_ENABLE(x) (1 << ((x)&0x1F)) /* Wakeup Enable Peripheral #x */ #define IWR_DISABLE(x) (0xFFFFFFFF ^ (1 << ((x)&0x1F))) /* Wakeup Disable Peripheral #x */ -/* *************** WATCHDOG TIMER MASKS *******************************************/ -/* WDOG_CTL Masks */ -#define WDOG_RESET 0x0000 /* Generate Reset Event */ -#define WDOG_NMI 0x0002 /* Generate Non-Maskable Interrupt (NMI) Event */ -#define WDOG_GPI 0x0004 /* Generate General Purpose (GP) Interrupt */ -#define WDOG_NONE 0x0006 /* Disable Watchdog Timer Interrupts */ -#define TMR_EN 0x0FF0 /* Watchdog Counter Enable */ -#define TMR_DIS 0x0AD0 /* Watchdog Counter Disable */ -#define TRO 0x8000 /* Watchdog Expired */ - /* ************** UART CONTROLLER MASKS *************************/ /* UARTx_LCR Masks */ -#define WLS(x) ((((x)&0x3)-5) & 0x03) /* Word Length Select */ +#define WLS(x) (((x)-5) & 0x03) /* Word Length Select */ #define STB 0x04 /* Stop Bits */ #define PEN 0x08 /* Parity Enable */ #define EPS 0x10 /* Even Parity Select */ @@ -1128,8 +1123,8 @@ #define DLAB 0x80 /* Divisor Latch Access */ /* UARTx_MCR Mask */ -#define LOOP 0x10 /* Loopback Mode Enable */ - +#define LOOP_ENA 0x10 /* Loopback Mode Enable */ +#define LOOP_ENA_P 0x04 /* UARTx_LSR Masks */ #define DR 0x01 /* Data Ready */ #define OE 0x02 /* Overrun Error */ @@ -1229,10 +1224,10 @@ #define TIMIL1 0x00000002 /* Timer 1 Interrupt */ #define TIMIL2 0x00000004 /* Timer 2 Interrupt */ #define TIMIL3 0x00000008 /* Timer 3 Interrupt */ -#define TOVL_ERR0 0x00000010 /* Timer 0 Counter Overflow */ -#define TOVL_ERR1 0x00000020 /* Timer 1 Counter Overflow */ -#define TOVL_ERR2 0x00000040 /* Timer 2 Counter Overflow */ -#define TOVL_ERR3 0x00000080 /* Timer 3 Counter Overflow */ +#define TOVF_ERR0 0x00000010 /* Timer 0 Counter Overflow */ +#define TOVF_ERR1 0x00000020 /* Timer 1 Counter Overflow */ +#define TOVF_ERR2 0x00000040 /* Timer 2 Counter Overflow */ +#define TOVF_ERR3 0x00000080 /* Timer 3 Counter Overflow */ #define TRUN0 0x00001000 /* Timer 0 Slave Enable Status */ #define TRUN1 0x00002000 /* Timer 1 Slave Enable Status */ #define TRUN2 0x00004000 /* Timer 2 Slave Enable Status */ @@ -1241,15 +1236,24 @@ #define TIMIL5 0x00020000 /* Timer 5 Interrupt */ #define TIMIL6 0x00040000 /* Timer 6 Interrupt */ #define TIMIL7 0x00080000 /* Timer 7 Interrupt */ -#define TOVL_ERR4 0x00100000 /* Timer 4 Counter Overflow */ -#define TOVL_ERR5 0x00200000 /* Timer 5 Counter Overflow */ -#define TOVL_ERR6 0x00400000 /* Timer 6 Counter Overflow */ -#define TOVL_ERR7 0x00800000 /* Timer 7 Counter Overflow */ +#define TOVF_ERR4 0x00100000 /* Timer 4 Counter Overflow */ +#define TOVF_ERR5 0x00200000 /* Timer 5 Counter Overflow */ +#define TOVF_ERR6 0x00400000 /* Timer 6 Counter Overflow */ +#define TOVF_ERR7 0x00800000 /* Timer 7 Counter Overflow */ #define TRUN4 0x10000000 /* Timer 4 Slave Enable Status */ #define TRUN5 0x20000000 /* Timer 5 Slave Enable Status */ #define TRUN6 0x40000000 /* Timer 6 Slave Enable Status */ #define TRUN7 0x80000000 /* Timer 7 Slave Enable Status */ +/* Alternate Deprecated Macros Provided For Backwards Code Compatibility */ +#define TOVL_ERR0 TOVF_ERR0 +#define TOVL_ERR1 TOVF_ERR1 +#define TOVL_ERR2 TOVF_ERR2 +#define TOVL_ERR3 TOVF_ERR3 +#define TOVL_ERR4 TOVF_ERR4 +#define TOVL_ERR5 TOVF_ERR5 +#define TOVL_ERR6 TOVF_ERR6 +#define TOVL_ERR7 TOVF_ERR7 /* TIMERx_CONFIG Masks */ #define PWM_OUT 0x0001 /* Pulse-Width Modulation Output Mode */ #define WDTH_CAP 0x0002 /* Width Capture Input Mode */ @@ -1647,6 +1651,8 @@ #define EBSZ_32 0x0002 /* SDRAM External Bank Size = 32MB */ #define EBSZ_64 0x0004 /* SDRAM External Bank Size = 64MB */ #define EBSZ_128 0x0006 /* SDRAM External Bank Size = 128MB */ +#define EBSZ_256 0x0008 /* SDRAM External Bank Size = 256MB */ +#define EBSZ_512 0x000A /* SDRAM External Bank Size = 512MB */ #define EBCAW_8 0x0000 /* SDRAM External Bank Column Address Width = 8 Bits */ #define EBCAW_9 0x0010 /* SDRAM External Bank Column Address Width = 9 Bits */ #define EBCAW_10 0x0020 /* SDRAM External Bank Column Address Width = 10 Bits */ @@ -1859,8 +1865,10 @@ #define TXECNT 0xFF00 /* Transmit Error Counter */ /* CAN_INTR Masks */ -#define MBRIF 0x0001 /* Mailbox Receive Interrupt */ -#define MBTIF 0x0002 /* Mailbox Transmit Interrupt */ +#define MBRIRQ 0x0001 /* Mailbox Receive Interrupt */ +#define MBRIF MBRIRQ /* legacy */ +#define MBTIRQ 0x0002 /* Mailbox Transmit Interrupt */ +#define MBTIF MBTIRQ /* legacy */ #define GIRQ 0x0004 /* Global Interrupt */ #define SMACK 0x0008 /* Sleep Mode Acknowledge */ #define CANTX 0x0040 /* CAN TX Bus Value */ @@ -2445,8 +2453,8 @@ #define PJCE_SPI 0x0004 /* Enable SPI_SSEL7 */ #define PFDE 0x0008 /* Port F DMA Request Enable */ -#define PGDE_UART 0x0000 /* Enable UART0 RX/TX */ -#define PGDE_DMA 0x0008 /* Enable DMAR1:0 */ +#define PFDE_UART 0x0000 /* Enable UART0 RX/TX */ +#define PFDE_DMA 0x0008 /* Enable DMAR1:0 */ #define PFTE 0x0010 /* Port F Timer Enable */ #define PFTE_UART 0x0000 /* Enable UART1 RX/TX */ @@ -2498,4 +2506,20 @@ #define OI 0x4000 /* Overflow Interrupt Generated */ #define BDI 0x8000 /* Block Done Interrupt Generated */ +/* entry addresses of the user-callable Boot ROM functions */ + +#define _BOOTROM_RESET 0xEF000000 +#define _BOOTROM_FINAL_INIT 0xEF000002 +#define _BOOTROM_DO_MEMORY_DMA 0xEF000006 +#define _BOOTROM_BOOT_DXE_FLASH 0xEF000008 +#define _BOOTROM_BOOT_DXE_SPI 0xEF00000A +#define _BOOTROM_BOOT_DXE_TWI 0xEF00000C +#define _BOOTROM_GET_DXE_ADDRESS_FLASH 0xEF000010 +#define _BOOTROM_GET_DXE_ADDRESS_SPI 0xEF000012 +#define _BOOTROM_GET_DXE_ADDRESS_TWI 0xEF000014 + +/* Alternate Deprecated Macros Provided For Backwards Code Compatibility */ +#define PGDE_UART PFDE_UART +#define PGDE_DMA PFDE_DMA +#define CKELOW SCKELOW #endif /* _DEF_BF534_H */ diff --git a/include/asm-blackfin/mach-bf537/defBF537.h b/include/asm-blackfin/mach-bf537/defBF537.h index 26f9c02eb73c1f..3f455909c418c0 100644 --- a/include/asm-blackfin/mach-bf537/defBF537.h +++ b/include/asm-blackfin/mach-bf537/defBF537.h @@ -32,12 +32,12 @@ #ifndef _DEF_BF537_H #define _DEF_BF537_H -/*include all Core registers and bit definitions*/ -#include "defBF537.h" - -/*include core specific register pointer definitions*/ +/* Include all Core registers and bit definitions*/ #include <asm/mach-common/cdef_LPBlackfin.h> +/* Include all MMR and bit defines common to BF534 */ +#include "defBF534.h" + /************************************************************************************ ** Define EMAC Section Unique to BF536/BF537 *************************************************************************************/ diff --git a/include/asm-blackfin/mach-bf548/cdefBF542.h b/include/asm-blackfin/mach-bf548/cdefBF542.h new file mode 100644 index 00000000000000..308b33ab531198 --- /dev/null +++ b/include/asm-blackfin/mach-bf548/cdefBF542.h @@ -0,0 +1,590 @@ +/* + * File: include/asm-blackfin/mach-bf548/cdefBF542.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _CDEF_BF542_H +#define _CDEF_BF542_H + +/* include all Core registers and bit definitions */ +#include "defBF542.h" + +/* include core sbfin_read_()ecific register pointer definitions */ +#include <asm/mach-common/cdef_LPBlackfin.h> + +/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF542 */ + +/* include cdefBF54x_base.h for the set of #defines that are common to all ADSP-BF54x bfin_read_()rocessors */ +#include "cdefBF54x_base.h" + +/* The following are the #defines needed by ADSP-BF542 that are not in the common header */ + +/* ATAPI Registers */ + +#define bfin_read_ATAPI_CONTROL() bfin_read16(ATAPI_CONTROL) +#define bfin_write_ATAPI_CONTROL(val) bfin_write16(ATAPI_CONTROL, val) +#define bfin_read_ATAPI_STATUS() bfin_read16(ATAPI_STATUS) +#define bfin_write_ATAPI_STATUS(val) bfin_write16(ATAPI_STATUS, val) +#define bfin_read_ATAPI_DEV_ADDR() bfin_read16(ATAPI_DEV_ADDR) +#define bfin_write_ATAPI_DEV_ADDR(val) bfin_write16(ATAPI_DEV_ADDR, val) +#define bfin_read_ATAPI_DEV_TXBUF() bfin_read16(ATAPI_DEV_TXBUF) +#define bfin_write_ATAPI_DEV_TXBUF(val) bfin_write16(ATAPI_DEV_TXBUF, val) +#define bfin_read_ATAPI_DEV_RXBUF() bfin_read16(ATAPI_DEV_RXBUF) +#define bfin_write_ATAPI_DEV_RXBUF(val) bfin_write16(ATAPI_DEV_RXBUF, val) +#define bfin_read_ATAPI_INT_MASK() bfin_read16(ATAPI_INT_MASK) +#define bfin_write_ATAPI_INT_MASK(val) bfin_write16(ATAPI_INT_MASK, val) +#define bfin_read_ATAPI_INT_STATUS() bfin_read16(ATAPI_INT_STATUS) +#define bfin_write_ATAPI_INT_STATUS(val) bfin_write16(ATAPI_INT_STATUS, val) +#define bfin_read_ATAPI_XFER_LEN() bfin_read16(ATAPI_XFER_LEN) +#define bfin_write_ATAPI_XFER_LEN(val) bfin_write16(ATAPI_XFER_LEN, val) +#define bfin_read_ATAPI_LINE_STATUS() bfin_read16(ATAPI_LINE_STATUS) +#define bfin_write_ATAPI_LINE_STATUS(val) bfin_write16(ATAPI_LINE_STATUS, val) +#define bfin_read_ATAPI_SM_STATE() bfin_read16(ATAPI_SM_STATE) +#define bfin_write_ATAPI_SM_STATE(val) bfin_write16(ATAPI_SM_STATE, val) +#define bfin_read_ATAPI_TERMINATE() bfin_read16(ATAPI_TERMINATE) +#define bfin_write_ATAPI_TERMINATE(val) bfin_write16(ATAPI_TERMINATE, val) +#define bfin_read_ATAPI_PIO_TFRCNT() bfin_read16(ATAPI_PIO_TFRCNT) +#define bfin_write_ATAPI_PIO_TFRCNT(val) bfin_write16(ATAPI_PIO_TFRCNT, val) +#define bfin_read_ATAPI_DMA_TFRCNT() bfin_read16(ATAPI_DMA_TFRCNT) +#define bfin_write_ATAPI_DMA_TFRCNT(val) bfin_write16(ATAPI_DMA_TFRCNT, val) +#define bfin_read_ATAPI_UMAIN_TFRCNT() bfin_read16(ATAPI_UMAIN_TFRCNT) +#define bfin_write_ATAPI_UMAIN_TFRCNT(val) bfin_write16(ATAPI_UMAIN_TFRCNT, val) +#define bfin_read_ATAPI_UDMAOUT_TFRCNT() bfin_read16(ATAPI_UDMAOUT_TFRCNT) +#define bfin_write_ATAPI_UDMAOUT_TFRCNT(val) bfin_write16(ATAPI_UDMAOUT_TFRCNT, val) +#define bfin_read_ATAPI_REG_TIM_0() bfin_read16(ATAPI_REG_TIM_0) +#define bfin_write_ATAPI_REG_TIM_0(val) bfin_write16(ATAPI_REG_TIM_0, val) +#define bfin_read_ATAPI_PIO_TIM_0() bfin_read16(ATAPI_PIO_TIM_0) +#define bfin_write_ATAPI_PIO_TIM_0(val) bfin_write16(ATAPI_PIO_TIM_0, val) +#define bfin_read_ATAPI_PIO_TIM_1() bfin_read16(ATAPI_PIO_TIM_1) +#define bfin_write_ATAPI_PIO_TIM_1(val) bfin_write16(ATAPI_PIO_TIM_1, val) +#define bfin_read_ATAPI_MULTI_TIM_0() bfin_read16(ATAPI_MULTI_TIM_0) +#define bfin_write_ATAPI_MULTI_TIM_0(val) bfin_write16(ATAPI_MULTI_TIM_0, val) +#define bfin_read_ATAPI_MULTI_TIM_1() bfin_read16(ATAPI_MULTI_TIM_1) +#define bfin_write_ATAPI_MULTI_TIM_1(val) bfin_write16(ATAPI_MULTI_TIM_1, val) +#define bfin_read_ATAPI_MULTI_TIM_2() bfin_read16(ATAPI_MULTI_TIM_2) +#define bfin_write_ATAPI_MULTI_TIM_2(val) bfin_write16(ATAPI_MULTI_TIM_2, val) +#define bfin_read_ATAPI_ULTRA_TIM_0() bfin_read16(ATAPI_ULTRA_TIM_0) +#define bfin_write_ATAPI_ULTRA_TIM_0(val) bfin_write16(ATAPI_ULTRA_TIM_0, val) +#define bfin_read_ATAPI_ULTRA_TIM_1() bfin_read16(ATAPI_ULTRA_TIM_1) +#define bfin_write_ATAPI_ULTRA_TIM_1(val) bfin_write16(ATAPI_ULTRA_TIM_1, val) +#define bfin_read_ATAPI_ULTRA_TIM_2() bfin_read16(ATAPI_ULTRA_TIM_2) +#define bfin_write_ATAPI_ULTRA_TIM_2(val) bfin_write16(ATAPI_ULTRA_TIM_2, val) +#define bfin_read_ATAPI_ULTRA_TIM_3() bfin_read16(ATAPI_ULTRA_TIM_3) +#define bfin_write_ATAPI_ULTRA_TIM_3(val) bfin_write16(ATAPI_ULTRA_TIM_3, val) + +/* SDH Registers */ + +#define bfin_read_SDH_PWR_CTL() bfin_read16(SDH_PWR_CTL) +#define bfin_write_SDH_PWR_CTL(val) bfin_write16(SDH_PWR_CTL, val) +#define bfin_read_SDH_CLK_CTL() bfin_read16(SDH_CLK_CTL) +#define bfin_write_SDH_CLK_CTL(val) bfin_write16(SDH_CLK_CTL, val) +#define bfin_read_SDH_ARGUMENT() bfin_read32(SDH_ARGUMENT) +#define bfin_write_SDH_ARGUMENT(val) bfin_write32(SDH_ARGUMENT, val) +#define bfin_read_SDH_COMMAND() bfin_read16(SDH_COMMAND) +#define bfin_write_SDH_COMMAND(val) bfin_write16(SDH_COMMAND, val) +#define bfin_read_SDH_RESP_CMD() bfin_read16(SDH_RESP_CMD) +#define bfin_write_SDH_RESP_CMD(val) bfin_write16(SDH_RESP_CMD, val) +#define bfin_read_SDH_RESPONSE0() bfin_read32(SDH_RESPONSE0) +#define bfin_write_SDH_RESPONSE0(val) bfin_write32(SDH_RESPONSE0, val) +#define bfin_read_SDH_RESPONSE1() bfin_read32(SDH_RESPONSE1) +#define bfin_write_SDH_RESPONSE1(val) bfin_write32(SDH_RESPONSE1, val) +#define bfin_read_SDH_RESPONSE2() bfin_read32(SDH_RESPONSE2) +#define bfin_write_SDH_RESPONSE2(val) bfin_write32(SDH_RESPONSE2, val) +#define bfin_read_SDH_RESPONSE3() bfin_read32(SDH_RESPONSE3) +#define bfin_write_SDH_RESPONSE3(val) bfin_write32(SDH_RESPONSE3, val) +#define bfin_read_SDH_DATA_TIMER() bfin_read32(SDH_DATA_TIMER) +#define bfin_write_SDH_DATA_TIMER(val) bfin_write32(SDH_DATA_TIMER, val) +#define bfin_read_SDH_DATA_LGTH() bfin_read16(SDH_DATA_LGTH) +#define bfin_write_SDH_DATA_LGTH(val) bfin_write16(SDH_DATA_LGTH, val) +#define bfin_read_SDH_DATA_CTL() bfin_read16(SDH_DATA_CTL) +#define bfin_write_SDH_DATA_CTL(val) bfin_write16(SDH_DATA_CTL, val) +#define bfin_read_SDH_DATA_CNT() fin_read16(SDH_DATA_CNT) +#define bfin_write_SDH_DATA_CNT(val) bfin_write16(SDH_DATA_CNT, val) +#define bfin_read_SDH_STATUS() bfin_read32(SDH_STATUS) +#define bfin_write_SDH_STATUS(val) bfin_write32(SDH_STATUS, val) +#define bfin_read_SDH_STATUS_CLR() fin_read16(SDH_STATUS_CLR) +#define bfin_write_SDH_STATUS_CLR(val) fin_write16(SDH_STATUS_CLR, val) +#define bfin_read_SDH_MASK0() bfin_read32(SDH_MASK0) +#define bfin_write_SDH_MASK0(val) bfin_write32(SDH_MASK0, val) +#define bfin_read_SDH_MASK1() bfin_read32(SDH_MASK1) +#define bfin_write_SDH_MASK1(val) bfin_write32(SDH_MASK1, val) +#define bfin_read_SDH_FIFO_CNT() bfin_read16(SDH_FIFO_CNT) +#define bfin_write_SDH_FIFO_CNT(val) bfin_write16(SDH_FIFO_CNT, val) +#define bfin_read_SDH_FIFO() bfin_read32(SDH_FIFO) +#define bfin_write_SDH_FIFO(val) bfin_write32(SDH_FIFO, val) +#define bfin_read_SDH_E_STATUS() bfin_read16(SDH_E_STATUS) +#define bfin_write_SDH_E_STATUS(val) bfin_write16(SDH_E_STATUS, val) +#define bfin_read_SDH_E_MASK() bfin_read16(SDH_E_MASK) +#define bfin_write_SDH_E_MASK(val) bfin_write16(SDH_E_MASK, val) +#define bfin_read_SDH_CFG() bfin_read16(SDH_CFG) +#define bfin_write_SDH_CFG(val) bfin_write16(SDH_CFG, val) +#define bfin_read_SDH_RD_WAIT_EN() bfin_read16(SDH_RD_WAIT_EN) +#define bfin_write_SDH_RD_WAIT_EN(val) bfin_write16(SDH_RD_WAIT_EN, val) +#define bfin_read_SDH_PID0() bfin_read16(SDH_PID0) +#define bfin_write_SDH_PID0(val) bfin_write16(SDH_PID0, val) +#define bfin_read_SDH_PID1() bfin_read16(SDH_PID1) +#define bfin_write_SDH_PID1(val) bfin_write16(SDH_PID1, val) +#define bfin_read_SDH_PID2() bfin_read16(SDH_PID2) +#define bfin_write_SDH_PID2(val) bfin_write16(SDH_PID2, val) +#define bfin_read_SDH_PID3() bfin_read16(SDH_PID3) +#define bfin_write_SDH_PID3(val) bfin_write16(SDH_PID3, val) +#define bfin_read_SDH_PID4() bfin_read16(SDH_PID4) +#define bfin_write_SDH_PID4(val) bfin_write16(SDH_PID4, val) +#define bfin_read_SDH_PID5() bfin_read16(SDH_PID5) +#define bfin_write_SDH_PID5(val) bfin_write16(SDH_PID5, val) +#define bfin_read_SDH_PID6() bfin_read16(SDH_PID6) +#define bfin_write_SDH_PID6(val) bfin_write16(SDH_PID6, val) +#define bfin_read_SDH_PID7() bfin_read16(SDH_PID7) +#define bfin_write_SDH_PID7(val) bfin_write16(SDH_PID7, val) + +/* USB Control Registers */ + +#define bfin_read_USB_FADDR() bfin_read16(USB_FADDR) +#define bfin_write_USB_FADDR(val) bfin_write16(USB_FADDR, val) +#define bfin_read_USB_POWER() bfin_read16(USB_POWER) +#define bfin_write_USB_POWER(val) bfin_write16(USB_POWER, val) +#define bfin_read_USB_INTRTX() bfin_read16(USB_INTRTX) +#define bfin_write_USB_INTRTX(val) bfin_write16(USB_INTRTX, val) +#define bfin_read_USB_INTRRX() bfin_read16(USB_INTRRX) +#define bfin_write_USB_INTRRX(val) bfin_write16(USB_INTRRX, val) +#define bfin_read_USB_INTRTXE() bfin_read16(USB_INTRTXE) +#define bfin_write_USB_INTRTXE(val) bfin_write16(USB_INTRTXE, val) +#define bfin_read_USB_INTRRXE() bfin_read16(USB_INTRRXE) +#define bfin_write_USB_INTRRXE(val) bfin_write16(USB_INTRRXE, val) +#define bfin_read_USB_INTRUSB() bfin_read16(USB_INTRUSB) +#define bfin_write_USB_INTRUSB(val) bfin_write16(USB_INTRUSB, val) +#define bfin_read_USB_INTRUSBE() bfin_read16(USB_INTRUSBE) +#define bfin_write_USB_INTRUSBE(val) bfin_write16(USB_INTRUSBE, val) +#define bfin_read_USB_FRAME() bfin_read16(USB_FRAME) +#define bfin_write_USB_FRAME(val) bfin_write16(USB_FRAME, val) +#define bfin_read_USB_INDEX() bfin_read16(USB_INDEX) +#define bfin_write_USB_INDEX(val) bfin_write16(USB_INDEX, val) +#define bfin_read_USB_TESTMODE() fin_read16(USB_TESTMODE) +#define bfin_write_USB_TESTMODE(val) fin_write16(USB_TESTMODE, val) +#define bfin_read_USB_GLOBINTR() bfin_read16(USB_GLOBINTR) +#define bfin_write_USB_GLOBINTR(val) bfin_write16(USB_GLOBINTR, val) +#define bfin_read_USB_GLOBAL_CTL() bfin_read16(USB_GLOBAL_CTL) +#define bfin_write_USB_GLOBAL_CTL(val) bfin_write16(USB_GLOBAL_CTL, val) + +/* USB Packet Control Registers */ + +#define bfin_read_USB_TX_MAX_PACKET() bfin_read16(USB_TX_MAX_PACKET) +#define bfin_write_USB_TX_MAX_PACKET(val) bfin_write16(USB_TX_MAX_PACKET, val) +#define bfin_read_USB_CSR0() bfin_read16(USB_CSR0) +#define bfin_write_USB_CSR0(val) bfin_write16(USB_CSR0, val) +#define bfin_read_USB_TXCSR() bfin_read16(USB_TXCSR) +#define bfin_write_USB_TXCSR(val) bfin_write16(USB_TXCSR, val) +#define bfin_read_USB_RX_MAX_PACKET() bfin_read16(USB_RX_MAX_PACKET) +#define bfin_write_USB_RX_MAX_PACKET(val) bfin_write16(USB_RX_MAX_PACKET, val) +#define bfin_read_USB_RXCSR() bfin_read16(USB_RXCSR) +#define bfin_write_USB_RXCSR(val) bfin_write16(USB_RXCSR, val) +#define bfin_read_USB_COUNT0() bfin_read16(USB_COUNT0) +#define bfin_write_USB_COUNT0(val) bfin_write16(USB_COUNT0, val) +#define bfin_read_USB_RXCOUNT() bfin_read16(USB_RXCOUNT) +#define bfin_write_USB_RXCOUNT(val) bfin_write16(USB_RXCOUNT, val) +#define bfin_read_USB_TXTYPE() bfin_read16(USB_TXTYPE) +#define bfin_write_USB_TXTYPE(val) bfin_write16(USB_TXTYPE, val) +#define bfin_read_USB_NAKLIMIT0() bfin_read16(USB_NAKLIMIT0) +#define bfin_write_USB_NAKLIMIT0(val) bfin_write16(USB_NAKLIMIT0, val) +#define bfin_read_USB_TXINTERVAL() bfin_read16(USB_TXINTERVAL) +#define bfin_write_USB_TXINTERVAL(val) bfin_write16(USB_TXINTERVAL, val) +#define bfin_read_USB_RXTYPE() bfin_read16(USB_RXTYPE) +#define bfin_write_USB_RXTYPE(val) bfin_write16(USB_RXTYPE, val) +#define bfin_read_USB_RXINTERVAL() bfin_read16(USB_RXINTERVAL) +#define bfin_write_USB_RXINTERVAL(val) bfin_write16(USB_RXINTERVAL, val) +#define bfin_read_USB_TXCOUNT() bfin_read16(USB_TXCOUNT) +#define bfin_write_USB_TXCOUNT(val) bfin_write16(USB_TXCOUNT, val) + +/* USB Endbfin_read_()oint FIFO Registers */ + +#define bfin_read_USB_EP0_FIFO() bfin_read16(USB_EP0_FIFO) +#define bfin_write_USB_EP0_FIFO(val) bfin_write16(USB_EP0_FIFO, val) +#define bfin_read_USB_EP1_FIFO() bfin_read16(USB_EP1_FIFO) +#define bfin_write_USB_EP1_FIFO(val) bfin_write16(USB_EP1_FIFO, val) +#define bfin_read_USB_EP2_FIFO() bfin_read16(USB_EP2_FIFO) +#define bfin_write_USB_EP2_FIFO(val) bfin_write16(USB_EP2_FIFO, val) +#define bfin_read_USB_EP3_FIFO() bfin_read16(USB_EP3_FIFO) +#define bfin_write_USB_EP3_FIFO(val) bfin_write16(USB_EP3_FIFO, val) +#define bfin_read_USB_EP4_FIFO() bfin_read16(USB_EP4_FIFO) +#define bfin_write_USB_EP4_FIFO(val) bfin_write16(USB_EP4_FIFO, val) +#define bfin_read_USB_EP5_FIFO() bfin_read16(USB_EP5_FIFO) +#define bfin_write_USB_EP5_FIFO(val) bfin_write16(USB_EP5_FIFO, val) +#define bfin_read_USB_EP6_FIFO() bfin_read16(USB_EP6_FIFO) +#define bfin_write_USB_EP6_FIFO(val) bfin_write16(USB_EP6_FIFO, val) +#define bfin_read_USB_EP7_FIFO() bfin_read16(USB_EP7_FIFO) +#define bfin_write_USB_EP7_FIFO(val) bfin_write16(USB_EP7_FIFO, val) + +/* USB OTG Control Registers */ + +#define bfin_read_USB_OTG_DEV_CTL() bfin_read16(USB_OTG_DEV_CTL) +#define bfin_write_USB_OTG_DEV_CTL(val) bfin_write16(USB_OTG_DEV_CTL, val) +#define bfin_read_USB_OTG_VBUS_IRQ() bfin_read16(USB_OTG_VBUS_IRQ) +#define bfin_write_USB_OTG_VBUS_IRQ(val) fin_write16(USB_OTG_VBUS_IRQ, val) +#define bfin_read_USB_OTG_VBUS_MASK() bfin_read16(USB_OTG_VBUS_MASK) +#define bfin_write_USB_OTG_VBUS_MASK(val) bfin_write16(USB_OTG_VBUS_MASK, val) + +/* USB Phy Control Registers */ + +#define bfin_read_USB_LINKINFO() bfin_read16(USB_LINKINFO) +#define bfin_write_USB_LINKINFO(val) bfin_write16(USB_LINKINFO, val) +#define bfin_read_USB_VPLEN() bfin_read16(USB_VPLEN) +#define bfin_write_USB_VPLEN(val) bfin_write16(USB_VPLEN, val) +#define bfin_read_USB_HS_EOF1() bfin_read16(USB_HS_EOF1) +#define bfin_write_USB_HS_EOF1(val) bfin_write16(USB_HS_EOF1, val) +#define bfin_read_USB_FS_EOF1() bfin_read16(USB_FS_EOF1) +#define bfin_write_USB_FS_EOF1(val) bfin_write16(USB_FS_EOF1, val) +#define bfin_read_USB_LS_EOF1() bfin_read16(USB_LS_EOF1) +#define bfin_write_USB_LS_EOF1(val) bfin_write16(USB_LS_EOF1, val) + +/* (APHY_CNTRL is for ADI usage only) */ + +#define bfin_read_USB_APHY_CNTRL() bfin_read16(USB_APHY_CNTRL) +#define bfin_write_USB_APHY_CNTRL(val) bfin_write16(USB_APHY_CNTRL, val) + +/* (APHY_CALIB is for ADI usage only) */ + +#define bfin_read_USB_APHY_CALIB() bfin_read16(USB_APHY_CALIB) +#define bfin_write_USB_APHY_CALIB(val) bfin_write16(USB_APHY_CALIB, val) +#define bfin_read_USB_APHY_CNTRL2() bfin_read16(USB_APHY_CNTRL2) +#define bfin_write_USB_APHY_CNTRL2(val) bfin_write16(USB_APHY_CNTRL2, val) + +/* (PHY_TEST is for ADI usage only) */ + +#define bfin_read_USB_PHY_TEST() bfin_read16(USB_PHY_TEST) +#define bfin_write_USB_PHY_TEST(val) bfin_write16(USB_PHY_TEST, val) +#define bfin_read_USB_PLLOSC_CTRL() bfin_read16(USB_PLLOSC_CTRL) +#define bfin_write_USB_PLLOSC_CTRL(val) bfin_write16(USB_PLLOSC_CTRL, val) +#define bfin_read_USB_SRP_CLKDIV() bfin_read16(USB_SRP_CLKDIV) +#define bfin_write_USB_SRP_CLKDIV(val) bfin_write16(USB_SRP_CLKDIV, val) + +/* USB Endbfin_read_()oint 0 Control Registers */ + +#define bfin_read_USB_EP_NI0_TXMAXP() bfin_read16(USB_EP_NI0_TXMAXP) +#define bfin_write_USB_EP_NI0_TXMAXP(val) bfin_write16(USB_EP_NI0_TXMAXP, val) +#define bfin_read_USB_EP_NI0_TXCSR() bfin_read16(USB_EP_NI0_TXCSR) +#define bfin_write_USB_EP_NI0_TXCSR(val) bfin_write16(USB_EP_NI0_TXCSR, val) +#define bfin_read_USB_EP_NI0_RXMAXP() bfin_read16(USB_EP_NI0_RXMAXP) +#define bfin_write_USB_EP_NI0_RXMAXP(val) bfin_write16(USB_EP_NI0_RXMAXP, val) +#define bfin_read_USB_EP_NI0_RXCSR() bfin_read16(USB_EP_NI0_RXCSR) +#define bfin_write_USB_EP_NI0_RXCSR(val) bfin_write16(USB_EP_NI0_RXCSR, val) +#define bfin_read_USB_EP_NI0_RXCOUNT() bfin_read16(USB_EP_NI0_RXCOUNT) +#define bfin_write_USB_EP_NI0_RXCOUNT(val) bfin_write16(USB_EP_NI0_RXCOUNT, val) +#define bfin_read_USB_EP_NI0_TXTYPE() bfin_read16(USB_EP_NI0_TXTYPE) +#define bfin_write_USB_EP_NI0_TXTYPE(val) bfin_write16(USB_EP_NI0_TXTYPE, val) +#define bfin_read_USB_EP_NI0_TXINTERVAL() bfin_read16(USB_EP_NI0_TXINTERVAL) +#define bfin_write_USB_EP_NI0_TXINTERVAL(val) bfin_write16(USB_EP_NI0_TXINTERVAL, val) +#define bfin_read_USB_EP_NI0_RXTYPE() bfin_read16(USB_EP_NI0_RXTYPE) +#define bfin_write_USB_EP_NI0_RXTYPE(val) bfin_write16(USB_EP_NI0_RXTYPE, val) +#define bfin_read_USB_EP_NI0_RXINTERVAL() bfin_read16(USB_EP_NI0_RXINTERVAL) +#define bfin_write_USB_EP_NI0_RXINTERVAL(val) bfin_write16(USB_EP_NI0_RXINTERVAL, val) + +/* USB Endbfin_read_()oint 1 Control Registers */ + +#define bfin_read_USB_EP_NI0_TXCOUNT() bfin_read16(USB_EP_NI0_TXCOUNT) +#define bfin_write_USB_EP_NI0_TXCOUNT(val) bfin_write16(USB_EP_NI0_TXCOUNT, val) +#define bfin_read_USB_EP_NI1_TXMAXP() bfin_read16(USB_EP_NI1_TXMAXP) +#define bfin_write_USB_EP_NI1_TXMAXP(val) bfin_write16(USB_EP_NI1_TXMAXP, val) +#define bfin_read_USB_EP_NI1_TXCSR() bfin_read16(USB_EP_NI1_TXCSR) +#define bfin_write_USB_EP_NI1_TXCSR(val) bfin_write16(USB_EP_NI1_TXCSR, val) +#define bfin_read_USB_EP_NI1_RXMAXP() bfin_read16(USB_EP_NI1_RXMAXP) +#define bfin_write_USB_EP_NI1_RXMAXP(val) bfin_write16(USB_EP_NI1_RXMAXP, val) +#define bfin_read_USB_EP_NI1_RXCSR() bfin_read16(USB_EP_NI1_RXCSR) +#define bfin_write_USB_EP_NI1_RXCSR(val) bfin_write16(USB_EP_NI1_RXCSR, val) +#define bfin_read_USB_EP_NI1_RXCOUNT() bfin_read16(USB_EP_NI1_RXCOUNT) +#define bfin_write_USB_EP_NI1_RXCOUNT(val) bfin_write16(USB_EP_NI1_RXCOUNT, val) +#define bfin_read_USB_EP_NI1_TXTYPE() bfin_read16(USB_EP_NI1_TXTYPE) +#define bfin_write_USB_EP_NI1_TXTYPE(val) bfin_write16(USB_EP_NI1_TXTYPE, val) +#define bfin_read_USB_EP_NI1_TXINTERVAL() bfin_read16(USB_EP_NI1_TXINTERVAL) +#define bfin_write_USB_EP_NI1_TXINTERVAL(val) bfin_write16(USB_EP_NI1_TXINTERVAL, val) +#define bfin_read_USB_EP_NI1_RXTYPE() bfin_read16(USB_EP_NI1_RXTYPE) +#define bfin_write_USB_EP_NI1_RXTYPE(val) bfin_write16(USB_EP_NI1_RXTYPE, val) +#define bfin_read_USB_EP_NI1_RXINTERVAL() bfin_read16(USB_EP_NI1_RXINTERVAL) +#define bfin_write_USB_EP_NI1_RXINTERVAL(val) bfin_write16(USB_EP_NI1_RXINTERVAL, val) + +/* USB Endbfin_read_()oint 2 Control Registers */ + +#define bfin_read_USB_EP_NI1_TXCOUNT() bfin_read16(USB_EP_NI1_TXCOUNT) +#define bfin_write_USB_EP_NI1_TXCOUNT(val) bfin_write16(USB_EP_NI1_TXCOUNT, val) +#define bfin_read_USB_EP_NI2_TXMAXP() bfin_read16(USB_EP_NI2_TXMAXP) +#define bfin_write_USB_EP_NI2_TXMAXP(val) bfin_write16(USB_EP_NI2_TXMAXP, val) +#define bfin_read_USB_EP_NI2_TXCSR() bfin_read16(USB_EP_NI2_TXCSR) +#define bfin_write_USB_EP_NI2_TXCSR(val) bfin_write16(USB_EP_NI2_TXCSR, val) +#define bfin_read_USB_EP_NI2_RXMAXP() bfin_read16(USB_EP_NI2_RXMAXP) +#define bfin_write_USB_EP_NI2_RXMAXP(val) bfin_write16(USB_EP_NI2_RXMAXP, val) +#define bfin_read_USB_EP_NI2_RXCSR() bfin_read16(USB_EP_NI2_RXCSR) +#define bfin_write_USB_EP_NI2_RXCSR(val) bfin_write16(USB_EP_NI2_RXCSR, val) +#define bfin_read_USB_EP_NI2_RXCOUNT() bfin_read16(USB_EP_NI2_RXCOUNT) +#define bfin_write_USB_EP_NI2_RXCOUNT(val) bfin_write16(USB_EP_NI2_RXCOUNT, val) +#define bfin_read_USB_EP_NI2_TXTYPE() bfin_read16(USB_EP_NI2_TXTYPE) +#define bfin_write_USB_EP_NI2_TXTYPE(val) bfin_write16(USB_EP_NI2_TXTYPE, val) +#define bfin_read_USB_EP_NI2_TXINTERVAL() bfin_read16(USB_EP_NI2_TXINTERVAL) +#define bfin_write_USB_EP_NI2_TXINTERVAL(val) bfin_write16(USB_EP_NI2_TXINTERVAL, val) +#define bfin_read_USB_EP_NI2_RXTYPE() bfin_read16(USB_EP_NI2_RXTYPE) +#define bfin_write_USB_EP_NI2_RXTYPE(val) bfin_write16(USB_EP_NI2_RXTYPE, val) +#define bfin_read_USB_EP_NI2_RXINTERVAL() bfin_read16(USB_EP_NI2_RXINTERVAL) +#define bfin_write_USB_EP_NI2_RXINTERVAL(val) bfin_write16(USB_EP_NI2_RXINTERVAL, val) + +/* USB Endbfin_read_()oint 3 Control Registers */ + +#define bfin_read_USB_EP_NI2_TXCOUNT() bfin_read16(USB_EP_NI2_TXCOUNT) +#define bfin_write_USB_EP_NI2_TXCOUNT(val) bfin_write16(USB_EP_NI2_TXCOUNT, val) +#define bfin_read_USB_EP_NI3_TXMAXP() bfin_read16(USB_EP_NI3_TXMAXP) +#define bfin_write_USB_EP_NI3_TXMAXP(val) bfin_write16(USB_EP_NI3_TXMAXP, val) +#define bfin_read_USB_EP_NI3_TXCSR() bfin_read16(USB_EP_NI3_TXCSR) +#define bfin_write_USB_EP_NI3_TXCSR(val) bfin_write16(USB_EP_NI3_TXCSR, val) +#define bfin_read_USB_EP_NI3_RXMAXP() bfin_read16(USB_EP_NI3_RXMAXP) +#define bfin_write_USB_EP_NI3_RXMAXP(val) bfin_write16(USB_EP_NI3_RXMAXP, val) +#define bfin_read_USB_EP_NI3_RXCSR() bfin_read16(USB_EP_NI3_RXCSR) +#define bfin_write_USB_EP_NI3_RXCSR(val) bfin_write16(USB_EP_NI3_RXCSR, val) +#define bfin_read_USB_EP_NI3_RXCOUNT() bfin_read16(USB_EP_NI3_RXCOUNT) +#define bfin_write_USB_EP_NI3_RXCOUNT(val) bfin_write16(USB_EP_NI3_RXCOUNT, val) +#define bfin_read_USB_EP_NI3_TXTYPE() bfin_read16(USB_EP_NI3_TXTYPE) +#define bfin_write_USB_EP_NI3_TXTYPE(val) bfin_write16(USB_EP_NI3_TXTYPE, val) +#define bfin_read_USB_EP_NI3_TXINTERVAL() bfin_read16(USB_EP_NI3_TXINTERVAL) +#define bfin_write_USB_EP_NI3_TXINTERVAL(val) bfin_write16(USB_EP_NI3_TXINTERVAL, val) +#define bfin_read_USB_EP_NI3_RXTYPE() bfin_read16(USB_EP_NI3_RXTYPE) +#define bfin_write_USB_EP_NI3_RXTYPE(val) bfin_write16(USB_EP_NI3_RXTYPE, val) +#define bfin_read_USB_EP_NI3_RXINTERVAL() bfin_read16(USB_EP_NI3_RXINTERVAL) +#define bfin_write_USB_EP_NI3_RXINTERVAL(val) bfin_write16(USB_EP_NI3_RXINTERVAL, val) + +/* USB Endbfin_read_()oint 4 Control Registers */ + +#define bfin_read_USB_EP_NI3_TXCOUNT() bfin_read16(USB_EP_NI3_TXCOUNT) +#define bfin_write_USB_EP_NI3_TXCOUNT(val) bfin_write16(USB_EP_NI3_TXCOUNT, val) +#define bfin_read_USB_EP_NI4_TXMAXP() bfin_read16(USB_EP_NI4_TXMAXP) +#define bfin_write_USB_EP_NI4_TXMAXP(val) bfin_write16(USB_EP_NI4_TXMAXP, val) +#define bfin_read_USB_EP_NI4_TXCSR() bfin_read16(USB_EP_NI4_TXCSR) +#define bfin_write_USB_EP_NI4_TXCSR(val) bfin_write16(USB_EP_NI4_TXCSR, val) +#define bfin_read_USB_EP_NI4_RXMAXP() bfin_read16(USB_EP_NI4_RXMAXP) +#define bfin_write_USB_EP_NI4_RXMAXP(val) bfin_write16(USB_EP_NI4_RXMAXP, val) +#define bfin_read_USB_EP_NI4_RXCSR() bfin_read16(USB_EP_NI4_RXCSR) +#define bfin_write_USB_EP_NI4_RXCSR(val) bfin_write16(USB_EP_NI4_RXCSR, val) +#define bfin_read_USB_EP_NI4_RXCOUNT() bfin_read16(USB_EP_NI4_RXCOUNT) +#define bfin_write_USB_EP_NI4_RXCOUNT(val) bfin_write16(USB_EP_NI4_RXCOUNT, val) +#define bfin_read_USB_EP_NI4_TXTYPE() bfin_read16(USB_EP_NI4_TXTYPE) +#define bfin_write_USB_EP_NI4_TXTYPE(val) bfin_write16(USB_EP_NI4_TXTYPE, val) +#define bfin_read_USB_EP_NI4_TXINTERVAL() bfin_read16(USB_EP_NI4_TXINTERVAL) +#define bfin_write_USB_EP_NI4_TXINTERVAL(val) bfin_write16(USB_EP_NI4_TXINTERVAL, val) +#define bfin_read_USB_EP_NI4_RXTYPE() bfin_read16(USB_EP_NI4_RXTYPE) +#define bfin_write_USB_EP_NI4_RXTYPE(val) bfin_write16(USB_EP_NI4_RXTYPE, val) +#define bfin_read_USB_EP_NI4_RXINTERVAL() bfin_read16(USB_EP_NI4_RXINTERVAL) +#define bfin_write_USB_EP_NI4_RXINTERVAL(val) bfin_write16(USB_EP_NI4_RXINTERVAL, val) + +/* USB Endbfin_read_()oint 5 Control Registers */ + +#define bfin_read_USB_EP_NI4_TXCOUNT() bfin_read16(USB_EP_NI4_TXCOUNT) +#define bfin_write_USB_EP_NI4_TXCOUNT(val) bfin_write16(USB_EP_NI4_TXCOUNT, val) +#define bfin_read_USB_EP_NI5_TXMAXP() bfin_read16(USB_EP_NI5_TXMAXP) +#define bfin_write_USB_EP_NI5_TXMAXP(val) bfin_write16(USB_EP_NI5_TXMAXP, val) +#define bfin_read_USB_EP_NI5_TXCSR() bfin_read16(USB_EP_NI5_TXCSR) +#define bfin_write_USB_EP_NI5_TXCSR(val) bfin_write16(USB_EP_NI5_TXCSR, val) +#define bfin_read_USB_EP_NI5_RXMAXP() bfin_read16(USB_EP_NI5_RXMAXP) +#define bfin_write_USB_EP_NI5_RXMAXP(val) bfin_write16(USB_EP_NI5_RXMAXP, val) +#define bfin_read_USB_EP_NI5_RXCSR() bfin_read16(USB_EP_NI5_RXCSR) +#define bfin_write_USB_EP_NI5_RXCSR(val) bfin_write16(USB_EP_NI5_RXCSR, val) +#define bfin_read_USB_EP_NI5_RXCOUNT() bfin_read16(USB_EP_NI5_RXCOUNT) +#define bfin_write_USB_EP_NI5_RXCOUNT(val) bfin_write16(USB_EP_NI5_RXCOUNT, val) +#define bfin_read_USB_EP_NI5_TXTYPE() bfin_read16(USB_EP_NI5_TXTYPE) +#define bfin_write_USB_EP_NI5_TXTYPE(val) bfin_write16(USB_EP_NI5_TXTYPE, val) +#define bfin_read_USB_EP_NI5_TXINTERVAL() bfin_read16(USB_EP_NI5_TXINTERVAL) +#define bfin_write_USB_EP_NI5_TXINTERVAL(val) bfin_write16(USB_EP_NI5_TXINTERVAL, val) +#define bfin_read_USB_EP_NI5_RXTYPE() bfin_read16(USB_EP_NI5_RXTYPE) +#define bfin_write_USB_EP_NI5_RXTYPE(val) bfin_write16(USB_EP_NI5_RXTYPE, val) +#define bfin_read_USB_EP_NI5_RXINTERVAL() bfin_read16(USB_EP_NI5_RXINTERVAL) +#define bfin_write_USB_EP_NI5_RXINTERVAL(val) bfin_write16(USB_EP_NI5_RXINTERVAL, val) + +/* USB Endbfin_read_()oint 6 Control Registers */ + +#define bfin_read_USB_EP_NI5_TXCOUNT() bfin_read16(USB_EP_NI5_TXCOUNT) +#define bfin_write_USB_EP_NI5_TXCOUNT(val) bfin_write16(USB_EP_NI5_TXCOUNT, val) +#define bfin_read_USB_EP_NI6_TXMAXP() bfin_read16(USB_EP_NI6_TXMAXP) +#define bfin_write_USB_EP_NI6_TXMAXP(val) bfin_write16(USB_EP_NI6_TXMAXP, val) +#define bfin_read_USB_EP_NI6_TXCSR() bfin_read16(USB_EP_NI6_TXCSR) +#define bfin_write_USB_EP_NI6_TXCSR(val) bfin_write16(USB_EP_NI6_TXCSR, val) +#define bfin_read_USB_EP_NI6_RXMAXP() bfin_read16(USB_EP_NI6_RXMAXP) +#define bfin_write_USB_EP_NI6_RXMAXP(val) bfin_write16(USB_EP_NI6_RXMAXP, val) +#define bfin_read_USB_EP_NI6_RXCSR() bfin_read16(USB_EP_NI6_RXCSR) +#define bfin_write_USB_EP_NI6_RXCSR(val) bfin_write16(USB_EP_NI6_RXCSR, val) +#define bfin_read_USB_EP_NI6_RXCOUNT() bfin_read16(USB_EP_NI6_RXCOUNT) +#define bfin_write_USB_EP_NI6_RXCOUNT(val) bfin_write16(USB_EP_NI6_RXCOUNT, val) +#define bfin_read_USB_EP_NI6_TXTYPE() bfin_read16(USB_EP_NI6_TXTYPE) +#define bfin_write_USB_EP_NI6_TXTYPE(val) bfin_write16(USB_EP_NI6_TXTYPE, val) +#define bfin_read_USB_EP_NI6_TXINTERVAL() bfin_read16(USB_EP_NI6_TXINTERVAL) +#define bfin_write_USB_EP_NI6_TXINTERVAL(val) bfin_write16(USB_EP_NI6_TXINTERVAL, val) +#define bfin_read_USB_EP_NI6_RXTYPE() bfin_read16(USB_EP_NI6_RXTYPE) +#define bfin_write_USB_EP_NI6_RXTYPE(val) bfin_write16(USB_EP_NI6_RXTYPE, val) +#define bfin_read_USB_EP_NI6_RXINTERVAL() bfin_read16(USB_EP_NI6_RXINTERVAL) +#define bfin_write_USB_EP_NI6_RXINTERVAL(val) bfin_write16(USB_EP_NI6_RXINTERVAL, val) + +/* USB Endbfin_read_()oint 7 Control Registers */ + +#define bfin_read_USB_EP_NI6_TXCOUNT() bfin_read16(USB_EP_NI6_TXCOUNT) +#define bfin_write_USB_EP_NI6_TXCOUNT(val) bfin_write16(USB_EP_NI6_TXCOUNT, val) +#define bfin_read_USB_EP_NI7_TXMAXP() bfin_read16(USB_EP_NI7_TXMAXP) +#define bfin_write_USB_EP_NI7_TXMAXP(val) bfin_write16(USB_EP_NI7_TXMAXP, val) +#define bfin_read_USB_EP_NI7_TXCSR() bfin_read16(USB_EP_NI7_TXCSR) +#define bfin_write_USB_EP_NI7_TXCSR(val) bfin_write16(USB_EP_NI7_TXCSR, val) +#define bfin_read_USB_EP_NI7_RXMAXP() bfin_read16(USB_EP_NI7_RXMAXP) +#define bfin_write_USB_EP_NI7_RXMAXP(val) bfin_write16(USB_EP_NI7_RXMAXP, val) +#define bfin_read_USB_EP_NI7_RXCSR() bfin_read16(USB_EP_NI7_RXCSR) +#define bfin_write_USB_EP_NI7_RXCSR(val) bfin_write16(USB_EP_NI7_RXCSR, val) +#define bfin_read_USB_EP_NI7_RXCOUNT() bfin_read16(USB_EP_NI7_RXCOUNT) +#define bfin_write_USB_EP_NI7_RXCOUNT(val) bfin_write16(USB_EP_NI7_RXCOUNT, val) +#define bfin_read_USB_EP_NI7_TXTYPE() bfin_read16(USB_EP_NI7_TXTYPE) +#define bfin_write_USB_EP_NI7_TXTYPE(val) bfin_write16(USB_EP_NI7_TXTYPE, val) +#define bfin_read_USB_EP_NI7_TXINTERVAL() bfin_read16(USB_EP_NI7_TXINTERVAL) +#define bfin_write_USB_EP_NI7_TXINTERVAL(val) bfin_write16(USB_EP_NI7_TXINTERVAL, val) +#define bfin_read_USB_EP_NI7_RXTYPE() bfin_read16(USB_EP_NI7_RXTYPE) +#define bfin_write_USB_EP_NI7_RXTYPE(val) bfin_write16(USB_EP_NI7_RXTYPE, val) +#define bfin_read_USB_EP_NI7_RXINTERVAL() bfin_read16(USB_EP_NI7_RXINTERVAL) +#define bfin_write_USB_EP_NI7_RXINTERVAL(val) bfin_write16(USB_EP_NI7_RXINTERVAL, val) +#define bfin_read_USB_EP_NI7_TXCOUNT() bfin_read16(USB_EP_NI7_TXCOUNT) +#define bfin_write_USB_EP_NI7_TXCOUNT(val) bfin_write16(USB_EP_NI7_TXCOUNT, val) +#define bfin_read_USB_DMA_INTERRUPT() bfin_read16(USB_DMA_INTERRUPT) +#define bfin_write_USB_DMA_INTERRUPT(val) bfin_write16(USB_DMA_INTERRUPT, val) + +/* USB Channel 0 Config Registers */ + +#define bfin_read_USB_DMA0CONTROL() bfin_read16(USB_DMA0CONTROL) +#define bfin_write_USB_DMA0CONTROL(val) bfin_write16(USB_DMA0CONTROL, val) +#define bfin_read_USB_DMA0ADDRLOW() bfin_read16(USB_DMA0ADDRLOW) +#define bfin_write_USB_DMA0ADDRLOW(val) bfin_write16(USB_DMA0ADDRLOW, val) +#define bfin_read_USB_DMA0ADDRHIGH() bfin_read16(USB_DMA0ADDRHIGH) +#define bfin_write_USB_DMA0ADDRHIGH(val) bfin_write16(USB_DMA0ADDRHIGH, val) +#define bfin_read_USB_DMA0COUNTLOW() bfin_read16(USB_DMA0COUNTLOW) +#define bfin_write_USB_DMA0COUNTLOW(val) bfin_write16(USB_DMA0COUNTLOW, val) +#define bfin_read_USB_DMA0COUNTHIGH() bfin_read16(USB_DMA0COUNTHIGH) +#define bfin_write_USB_DMA0COUNTHIGH(val) bfin_write16(USB_DMA0COUNTHIGH, val) + +/* USB Channel 1 Config Registers */ + +#define bfin_read_USB_DMA1CONTROL() bfin_read16(USB_DMA1CONTROL) +#define bfin_write_USB_DMA1CONTROL(val) bfin_write16(USB_DMA1CONTROL, val) +#define bfin_read_USB_DMA1ADDRLOW() bfin_read16(USB_DMA1ADDRLOW) +#define bfin_write_USB_DMA1ADDRLOW(val) bfin_write16(USB_DMA1ADDRLOW, val) +#define bfin_read_USB_DMA1ADDRHIGH() bfin_read16(USB_DMA1ADDRHIGH) +#define bfin_write_USB_DMA1ADDRHIGH(val) bfin_write16(USB_DMA1ADDRHIGH, val) +#define bfin_read_USB_DMA1COUNTLOW() bfin_read16(USB_DMA1COUNTLOW) +#define bfin_write_USB_DMA1COUNTLOW(val) bfin_write16(USB_DMA1COUNTLOW, val) +#define bfin_read_USB_DMA1COUNTHIGH() bfin_read16(USB_DMA1COUNTHIGH) +#define bfin_write_USB_DMA1COUNTHIGH(val) bfin_write16(USB_DMA1COUNTHIGH, val) + +/* USB Channel 2 Config Registers */ + +#define bfin_read_USB_DMA2CONTROL() bfin_read16(USB_DMA2CONTROL) +#define bfin_write_USB_DMA2CONTROL(val) bfin_write16(USB_DMA2CONTROL, val) +#define bfin_read_USB_DMA2ADDRLOW() bfin_read16(USB_DMA2ADDRLOW) +#define bfin_write_USB_DMA2ADDRLOW(val) bfin_write16(USB_DMA2ADDRLOW, val) +#define bfin_read_USB_DMA2ADDRHIGH() bfin_read16(USB_DMA2ADDRHIGH) +#define bfin_write_USB_DMA2ADDRHIGH(val) bfin_write16(USB_DMA2ADDRHIGH, val) +#define bfin_read_USB_DMA2COUNTLOW() bfin_read16(USB_DMA2COUNTLOW) +#define bfin_write_USB_DMA2COUNTLOW(val) bfin_write16(USB_DMA2COUNTLOW, val) +#define bfin_read_USB_DMA2COUNTHIGH() bfin_read16(USB_DMA2COUNTHIGH) +#define bfin_write_USB_DMA2COUNTHIGH(val) bfin_write16(USB_DMA2COUNTHIGH, val) + +/* USB Channel 3 Config Registers */ + +#define bfin_read_USB_DMA3CONTROL() bfin_read16(USB_DMA3CONTROL) +#define bfin_write_USB_DMA3CONTROL(val) bfin_write16(USB_DMA3CONTROL, val) +#define bfin_read_USB_DMA3ADDRLOW() bfin_read16(USB_DMA3ADDRLOW) +#define bfin_write_USB_DMA3ADDRLOW(val) bfin_write16(USB_DMA3ADDRLOW, val) +#define bfin_read_USB_DMA3ADDRHIGH() bfin_read16(USB_DMA3ADDRHIGH) +#define bfin_write_USB_DMA3ADDRHIGH(val) bfin_write16(USB_DMA3ADDRHIGH, val) +#define bfin_read_USB_DMA3COUNTLOW() bfin_read16(USB_DMA3COUNTLOW) +#define bfin_write_USB_DMA3COUNTLOW(val) bfin_write16(USB_DMA3COUNTLOW, val) +#define bfin_read_USB_DMA3COUNTHIGH() bfin_read16(USB_DMA3COUNTHIGH) +#define bfin_write_USB_DMA3COUNTHIGH(val) bfin_write16(USB_DMA3COUNTHIGH, val) + +/* USB Channel 4 Config Registers */ + +#define bfin_read_USB_DMA4CONTROL() bfin_read16(USB_DMA4CONTROL) +#define bfin_write_USB_DMA4CONTROL(val) bfin_write16(USB_DMA4CONTROL, val) +#define bfin_read_USB_DMA4ADDRLOW() bfin_read16(USB_DMA4ADDRLOW) +#define bfin_write_USB_DMA4ADDRLOW(val) bfin_write16(USB_DMA4ADDRLOW, val) +#define bfin_read_USB_DMA4ADDRHIGH() bfin_read16(USB_DMA4ADDRHIGH) +#define bfin_write_USB_DMA4ADDRHIGH(val) bfin_write16(USB_DMA4ADDRHIGH, val) +#define bfin_read_USB_DMA4COUNTLOW() bfin_read16(USB_DMA4COUNTLOW) +#define bfin_write_USB_DMA4COUNTLOW(val) bfin_write16(USB_DMA4COUNTLOW, val) +#define bfin_read_USB_DMA4COUNTHIGH() bfin_read16(USB_DMA4COUNTHIGH) +#define bfin_write_USB_DMA4COUNTHIGH(val) bfin_write16(USB_DMA4COUNTHIGH, val) + +/* USB Channel 5 Config Registers */ + +#define bfin_read_USB_DMA5CONTROL() bfin_read16(USB_DMA5CONTROL) +#define bfin_write_USB_DMA5CONTROL(val) bfin_write16(USB_DMA5CONTROL, val) +#define bfin_read_USB_DMA5ADDRLOW() bfin_read16(USB_DMA5ADDRLOW) +#define bfin_write_USB_DMA5ADDRLOW(val) bfin_write16(USB_DMA5ADDRLOW, val) +#define bfin_read_USB_DMA5ADDRHIGH() bfin_read16(USB_DMA5ADDRHIGH) +#define bfin_write_USB_DMA5ADDRHIGH(val) bfin_write16(USB_DMA5ADDRHIGH, val) +#define bfin_read_USB_DMA5COUNTLOW() bfin_read16(USB_DMA5COUNTLOW) +#define bfin_write_USB_DMA5COUNTLOW(val) bfin_write16(USB_DMA5COUNTLOW, val) +#define bfin_read_USB_DMA5COUNTHIGH() bfin_read16(USB_DMA5COUNTHIGH) +#define bfin_write_USB_DMA5COUNTHIGH(val) bfin_write16(USB_DMA5COUNTHIGH, val) + +/* USB Channel 6 Config Registers */ + +#define bfin_read_USB_DMA6CONTROL() bfin_read16(USB_DMA6CONTROL) +#define bfin_write_USB_DMA6CONTROL(val) bfin_write16(USB_DMA6CONTROL, val) +#define bfin_read_USB_DMA6ADDRLOW() bfin_read16(USB_DMA6ADDRLOW) +#define bfin_write_USB_DMA6ADDRLOW(val) bfin_write16(USB_DMA6ADDRLOW, val) +#define bfin_read_USB_DMA6ADDRHIGH() bfin_read16(USB_DMA6ADDRHIGH) +#define bfin_write_USB_DMA6ADDRHIGH(val) bfin_write16(USB_DMA6ADDRHIGH, val) +#define bfin_read_USB_DMA6COUNTLOW() bfin_read16(USB_DMA6COUNTLOW) +#define bfin_write_USB_DMA6COUNTLOW(val) bfin_write16(USB_DMA6COUNTLOW, val) +#define bfin_read_USB_DMA6COUNTHIGH() bfin_read16(USB_DMA6COUNTHIGH) +#define bfin_write_USB_DMA6COUNTHIGH(val) bfin_write16(USB_DMA6COUNTHIGH, val) + +/* USB Channel 7 Config Registers */ + +#define bfin_read_USB_DMA7CONTROL() bfin_read16(USB_DMA7CONTROL) +#define bfin_write_USB_DMA7CONTROL(val) bfin_write16(USB_DMA7CONTROL, val) +#define bfin_read_USB_DMA7ADDRLOW() bfin_read16(USB_DMA7ADDRLOW) +#define bfin_write_USB_DMA7ADDRLOW(val) bfin_write16(USB_DMA7ADDRLOW, val) +#define bfin_read_USB_DMA7ADDRHIGH() bfin_read16(USB_DMA7ADDRHIGH) +#define bfin_write_USB_DMA7ADDRHIGH(val) bfin_write16(USB_DMA7ADDRHIGH, val) +#define bfin_read_USB_DMA7COUNTLOW() bfin_read16(USB_DMA7COUNTLOW) +#define bfin_write_USB_DMA7COUNTLOW(val) bfin_write16(USB_DMA7COUNTLOW, val) +#define bfin_read_USB_DMA7COUNTHIGH() bfin_read16(USB_DMA7COUNTHIGH) +#define bfin_write_USB_DMA7COUNTHIGH(val) bfin_write16(USB_DMA7COUNTHIGH, val) + +/* Keybfin_read_()ad Registers */ + +#define bfin_read_KPAD_CTL() bfin_read16(KPAD_CTL) +#define bfin_write_KPAD_CTL(val) bfin_write16(KPAD_CTL, val) +#define bfin_read_KPAD_PRESCALE() bfin_read16(KPAD_PRESCALE) +#define bfin_write_KPAD_PRESCALE(val) bfin_write16(KPAD_PRESCALE, val) +#define bfin_read_KPAD_MSEL() bfin_read16(KPAD_MSEL) +#define bfin_write_KPAD_MSEL(val) bfin_write16(KPAD_MSEL, val) +#define bfin_read_KPAD_ROWCOL() bfin_read16(KPAD_ROWCOL) +#define bfin_write_KPAD_ROWCOL(val) bfin_write16(KPAD_ROWCOL, val) +#define bfin_read_KPAD_STAT() bfin_read16(KPAD_STAT) +#define bfin_write_KPAD_STAT(val) bfin_write16(KPAD_STAT, val) +#define bfin_read_KPAD_SOFTEVAL() bfin_read16(KPAD_SOFTEVAL) +#define bfin_write_KPAD_SOFTEVAL(val) bfin_write16(KPAD_SOFTEVAL, val) + +#endif /* _CDEF_BF542_H */ diff --git a/include/asm-blackfin/mach-bf548/cdefBF544.h b/include/asm-blackfin/mach-bf548/cdefBF544.h new file mode 100644 index 00000000000000..7a2d177c8dc219 --- /dev/null +++ b/include/asm-blackfin/mach-bf548/cdefBF544.h @@ -0,0 +1,978 @@ +/* + * File: include/asm-blackfin/mach-bf548/cdefBF544.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _CDEF_BF544_H +#define _CDEF_BF544_H + +/* include all Core registers and bit definitions */ +#include "defBF544.h" + +/* include core sbfin_read_()ecific register pointer definitions */ +#include <asm/mach-common/cdef_LPBlackfin.h> + +/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF544 */ + +/* include cdefBF54x_base.h for the set of #defines that are common to all ADSP-BF54x bfin_read_()rocessors */ +#include "cdefBF54x_base.h" + +/* The following are the #defines needed by ADSP-BF544 that are not in the common header */ + +/* Timer Registers */ + +#define bfin_read_TIMER8_CONFIG() bfin_read16(TIMER8_CONFIG) +#define bfin_write_TIMER8_CONFIG(val) bfin_write16(TIMER8_CONFIG, val) +#define bfin_read_TIMER8_COUNTER() bfin_read32(TIMER8_COUNTER) +#define bfin_write_TIMER8_COUNTER(val) bfin_write32(TIMER8_COUNTER, val) +#define bfin_read_TIMER8_PERIOD() bfin_read32(TIMER8_PERIOD) +#define bfin_write_TIMER8_PERIOD(val) bfin_write32(TIMER8_PERIOD, val) +#define bfin_read_TIMER8_WIDTH() bfin_read32(TIMER8_WIDTH) +#define bfin_write_TIMER8_WIDTH(val) bfin_write32(TIMER8_WIDTH, val) +#define bfin_read_TIMER9_CONFIG() bfin_read16(TIMER9_CONFIG) +#define bfin_write_TIMER9_CONFIG(val) bfin_write16(TIMER9_CONFIG, val) +#define bfin_read_TIMER9_COUNTER() bfin_read32(TIMER9_COUNTER) +#define bfin_write_TIMER9_COUNTER(val) bfin_write32(TIMER9_COUNTER, val) +#define bfin_read_TIMER9_PERIOD() bfin_read32(TIMER9_PERIOD) +#define bfin_write_TIMER9_PERIOD(val) bfin_write32(TIMER9_PERIOD, val) +#define bfin_read_TIMER9_WIDTH() bfin_read32(TIMER9_WIDTH) +#define bfin_write_TIMER9_WIDTH(val) bfin_write32(TIMER9_WIDTH, val) +#define bfin_read_TIMER10_CONFIG() bfin_read16(TIMER10_CONFIG) +#define bfin_write_TIMER10_CONFIG(val) bfin_write16(TIMER10_CONFIG, val) +#define bfin_read_TIMER10_COUNTER() bfin_read32(TIMER10_COUNTER) +#define bfin_write_TIMER10_COUNTER(val) bfin_write32(TIMER10_COUNTER, val) +#define bfin_read_TIMER10_PERIOD() bfin_read32(TIMER10_PERIOD) +#define bfin_write_TIMER10_PERIOD(val) bfin_write32(TIMER10_PERIOD, val) +#define bfin_read_TIMER10_WIDTH() bfin_read32(TIMER10_WIDTH) +#define bfin_write_TIMER10_WIDTH(val) bfin_write32(TIMER10_WIDTH, val) + +/* Timer Groubfin_read_() of 3 */ + +#define bfin_read_TIMER_ENABLE1() bfin_read16(TIMER_ENABLE1) +#define bfin_write_TIMER_ENABLE1(val) bfin_write16(TIMER_ENABLE1, val) +#define bfin_read_TIMER_DISABLE1() bfin_read16(TIMER_DISABLE1) +#define bfin_write_TIMER_DISABLE1(val) bfin_write16(TIMER_DISABLE1, val) +#define bfin_read_TIMER_STATUS1() bfin_read32(TIMER_STATUS1) +#define bfin_write_TIMER_STATUS1(val) bfin_write32(TIMER_STATUS1, val) + +/* EPPI0 Registers */ + +#define bfin_read_EPPI0_STATUS() bfin_read16(EPPI0_STATUS) +#define bfin_write_EPPI0_STATUS(val) bfin_write16(EPPI0_STATUS, val) +#define bfin_read_EPPI0_HCOUNT() bfin_read16(EPPI0_HCOUNT) +#define bfin_write_EPPI0_HCOUNT(val) bfin_write16(EPPI0_HCOUNT, val) +#define bfin_read_EPPI0_HDELAY() bfin_read16(EPPI0_HDELAY) +#define bfin_write_EPPI0_HDELAY(val) bfin_write16(EPPI0_HDELAY, val) +#define bfin_read_EPPI0_VCOUNT() bfin_read16(EPPI0_VCOUNT) +#define bfin_write_EPPI0_VCOUNT(val) bfin_write16(EPPI0_VCOUNT, val) +#define bfin_read_EPPI0_VDELAY() bfin_read16(EPPI0_VDELAY) +#define bfin_write_EPPI0_VDELAY(val) bfin_write16(EPPI0_VDELAY, val) +#define bfin_read_EPPI0_FRAME() bfin_read16(EPPI0_FRAME) +#define bfin_write_EPPI0_FRAME(val) bfin_write16(EPPI0_FRAME, val) +#define bfin_read_EPPI0_LINE() bfin_read16(EPPI0_LINE) +#define bfin_write_EPPI0_LINE(val) bfin_write16(EPPI0_LINE, val) +#define bfin_read_EPPI0_CLKDIV() bfin_read16(EPPI0_CLKDIV) +#define bfin_write_EPPI0_CLKDIV(val) bfin_write16(EPPI0_CLKDIV, val) +#define bfin_read_EPPI0_CONTROL() bfin_read32(EPPI0_CONTROL) +#define bfin_write_EPPI0_CONTROL(val) bfin_write32(EPPI0_CONTROL, val) +#define bfin_read_EPPI0_FS1W_HBL() bfin_read32(EPPI0_FS1W_HBL) +#define bfin_write_EPPI0_FS1W_HBL(val) bfin_write32(EPPI0_FS1W_HBL, val) +#define bfin_read_EPPI0_FS1P_AVPL() bfin_read32(EPPI0_FS1P_AVPL) +#define bfin_write_EPPI0_FS1P_AVPL(val) bfin_write32(EPPI0_FS1P_AVPL, val) +#define bfin_read_EPPI0_FS2W_LVB() bfin_read32(EPPI0_FS2W_LVB) +#define bfin_write_EPPI0_FS2W_LVB(val) bfin_write32(EPPI0_FS2W_LVB, val) +#define bfin_read_EPPI0_FS2P_LAVF() bfin_read32(EPPI0_FS2P_LAVF) +#define bfin_write_EPPI0_FS2P_LAVF(val) bfin_write32(EPPI0_FS2P_LAVF, val) +#define bfin_read_EPPI0_CLIP() bfin_read32(EPPI0_CLIP) +#define bfin_write_EPPI0_CLIP(val) bfin_write32(EPPI0_CLIP, val) + +/* Two Wire Interface Registers (TWI1) */ + +#define bfin_read_TWI1_CLKDIV() bfin_read16(TWI1_CLKDIV) +#define bfin_write_TWI1_CLKDIV(val) bfin_write16(TWI1_CLKDIV, val) +#define bfin_read_TWI1_CONTROL() bfin_read16(TWI1_CONTROL) +#define bfin_write_TWI1_CONTROL(val) bfin_write16(TWI1_CONTROL, val) +#define bfin_read_TWI1_SLAVE_CTRL() bfin_read16(TWI1_SLAVE_CTRL) +#define bfin_write_TWI1_SLAVE_CTRL(val) bfin_write16(TWI1_SLAVE_CTRL, val) +#define bfin_read_TWI1_SLAVE_STAT() bfin_read16(TWI1_SLAVE_STAT) +#define bfin_write_TWI1_SLAVE_STAT(val) bfin_write16(TWI1_SLAVE_STAT, val) +#define bfin_read_TWI1_SLAVE_ADDR() bfin_read16(TWI1_SLAVE_ADDR) +#define bfin_write_TWI1_SLAVE_ADDR(val) bfin_write16(TWI1_SLAVE_ADDR, val) +#define bfin_read_TWI1_MASTER_CTRL() bfin_read16(TWI1_MASTER_CTRL) +#define bfin_write_TWI1_MASTER_CTRL(val) bfin_write16(TWI1_MASTER_CTRL, val) +#define bfin_read_TWI1_MASTER_STAT() bfin_read16(TWI1_MASTER_STAT) +#define bfin_write_TWI1_MASTER_STAT(val) bfin_write16(TWI1_MASTER_STAT, val) +#define bfin_read_TWI1_MASTER_ADDR() bfin_read16(TWI1_MASTER_ADDR) +#define bfin_write_TWI1_MASTER_ADDR(val) bfin_write16(TWI1_MASTER_ADDR, val) +#define bfin_read_TWI1_INT_STAT() bfin_read16(TWI1_INT_STAT) +#define bfin_write_TWI1_INT_STAT(val) bfin_write16(TWI1_INT_STAT, val) +#define bfin_read_TWI1_INT_MASK() bfin_read16(TWI1_INT_MASK) +#define bfin_write_TWI1_INT_MASK(val) bfin_write16(TWI1_INT_MASK, val) +#define bfin_read_TWI1_FIFO_CTRL() bfin_read16(TWI1_FIFO_CTRL) +#define bfin_write_TWI1_FIFO_CTRL(val) bfin_write16(TWI1_FIFO_CTRL, val) +#define bfin_read_TWI1_FIFO_STAT() bfin_read16(TWI1_FIFO_STAT) +#define bfin_write_TWI1_FIFO_STAT(val) bfin_write16(TWI1_FIFO_STAT, val) +#define bfin_read_TWI1_XMT_DATA8() bfin_read16(TWI1_XMT_DATA8) +#define bfin_write_TWI1_XMT_DATA8(val) bfin_write16(TWI1_XMT_DATA8, val) +#define bfin_read_TWI1_XMT_DATA16() bfin_read16(TWI1_XMT_DATA16) +#define bfin_write_TWI1_XMT_DATA16(val) bfin_write16(TWI1_XMT_DATA16, val) +#define bfin_read_TWI1_RCV_DATA8() bfin_read16(TWI1_RCV_DATA8) +#define bfin_write_TWI1_RCV_DATA8(val) bfin_write16(TWI1_RCV_DATA8, val) +#define bfin_read_TWI1_RCV_DATA16() bfin_read16(TWI1_RCV_DATA16) +#define bfin_write_TWI1_RCV_DATA16(val) bfin_write16(TWI1_RCV_DATA16, val) + +/* CAN Controller 1 Config 1 Registers */ + +#define bfin_read_CAN1_MC1() bfin_read16(CAN1_MC1) +#define bfin_write_CAN1_MC1(val) bfin_write16(CAN1_MC1, val) +#define bfin_read_CAN1_MD1() bfin_read16(CAN1_MD1) +#define bfin_write_CAN1_MD1(val) bfin_write16(CAN1_MD1, val) +#define bfin_read_CAN1_TRS1() bfin_read16(CAN1_TRS1) +#define bfin_write_CAN1_TRS1(val) bfin_write16(CAN1_TRS1, val) +#define bfin_read_CAN1_TRR1() bfin_read16(CAN1_TRR1) +#define bfin_write_CAN1_TRR1(val) bfin_write16(CAN1_TRR1, val) +#define bfin_read_CAN1_TA1() bfin_read16(CAN1_TA1) +#define bfin_write_CAN1_TA1(val) bfin_write16(CAN1_TA1, val) +#define bfin_read_CAN1_AA1() bfin_read16(CAN1_AA1) +#define bfin_write_CAN1_AA1(val) bfin_write16(CAN1_AA1, val) +#define bfin_read_CAN1_RMP1() bfin_read16(CAN1_RMP1) +#define bfin_write_CAN1_RMP1(val) bfin_write16(CAN1_RMP1, val) +#define bfin_read_CAN1_RML1() bfin_read16(CAN1_RML1) +#define bfin_write_CAN1_RML1(val) bfin_write16(CAN1_RML1, val) +#define bfin_read_CAN1_MBTIF1() bfin_read16(CAN1_MBTIF1) +#define bfin_write_CAN1_MBTIF1(val) bfin_write16(CAN1_MBTIF1, val) +#define bfin_read_CAN1_MBRIF1() bfin_read16(CAN1_MBRIF1) +#define bfin_write_CAN1_MBRIF1(val) bfin_write16(CAN1_MBRIF1, val) +#define bfin_read_CAN1_MBIM1() bfin_read16(CAN1_MBIM1) +#define bfin_write_CAN1_MBIM1(val) bfin_write16(CAN1_MBIM1, val) +#define bfin_read_CAN1_RFH1() bfin_read16(CAN1_RFH1) +#define bfin_write_CAN1_RFH1(val) bfin_write16(CAN1_RFH1, val) +#define bfin_read_CAN1_OPSS1() bfin_read16(CAN1_OPSS1) +#define bfin_write_CAN1_OPSS1(val) bfin_write16(CAN1_OPSS1, val) + +/* CAN Controller 1 Config 2 Registers */ + +#define bfin_read_CAN1_MC2() bfin_read16(CAN1_MC2) +#define bfin_write_CAN1_MC2(val) bfin_write16(CAN1_MC2, val) +#define bfin_read_CAN1_MD2() bfin_read16(CAN1_MD2) +#define bfin_write_CAN1_MD2(val) bfin_write16(CAN1_MD2, val) +#define bfin_read_CAN1_TRS2() bfin_read16(CAN1_TRS2) +#define bfin_write_CAN1_TRS2(val) bfin_write16(CAN1_TRS2, val) +#define bfin_read_CAN1_TRR2() bfin_read16(CAN1_TRR2) +#define bfin_write_CAN1_TRR2(val) bfin_write16(CAN1_TRR2, val) +#define bfin_read_CAN1_TA2() bfin_read16(CAN1_TA2) +#define bfin_write_CAN1_TA2(val) bfin_write16(CAN1_TA2, val) +#define bfin_read_CAN1_AA2() bfin_read16(CAN1_AA2) +#define bfin_write_CAN1_AA2(val) bfin_write16(CAN1_AA2, val) +#define bfin_read_CAN1_RMP2() bfin_read16(CAN1_RMP2) +#define bfin_write_CAN1_RMP2(val) bfin_write16(CAN1_RMP2, val) +#define bfin_read_CAN1_RML2() bfin_read16(CAN1_RML2) +#define bfin_write_CAN1_RML2(val) bfin_write16(CAN1_RML2, val) +#define bfin_read_CAN1_MBTIF2() bfin_read16(CAN1_MBTIF2) +#define bfin_write_CAN1_MBTIF2(val) bfin_write16(CAN1_MBTIF2, val) +#define bfin_read_CAN1_MBRIF2() bfin_read16(CAN1_MBRIF2) +#define bfin_write_CAN1_MBRIF2(val) bfin_write16(CAN1_MBRIF2, val) +#define bfin_read_CAN1_MBIM2() bfin_read16(CAN1_MBIM2) +#define bfin_write_CAN1_MBIM2(val) bfin_write16(CAN1_MBIM2, val) +#define bfin_read_CAN1_RFH2() bfin_read16(CAN1_RFH2) +#define bfin_write_CAN1_RFH2(val) bfin_write16(CAN1_RFH2, val) +#define bfin_read_CAN1_OPSS2() bfin_read16(CAN1_OPSS2) +#define bfin_write_CAN1_OPSS2(val) bfin_write16(CAN1_OPSS2, val) + +/* CAN Controller 1 Clock/Interrubfin_read_()t/Counter Registers */ + +#define bfin_read_CAN1_CLOCK() bfin_read16(CAN1_CLOCK) +#define bfin_write_CAN1_CLOCK(val) bfin_write16(CAN1_CLOCK, val) +#define bfin_read_CAN1_TIMING() bfin_read16(CAN1_TIMING) +#define bfin_write_CAN1_TIMING(val) bfin_write16(CAN1_TIMING, val) +#define bfin_read_CAN1_DEBUG() bfin_read16(CAN1_DEBUG) +#define bfin_write_CAN1_DEBUG(val) bfin_write16(CAN1_DEBUG, val) +#define bfin_read_CAN1_STATUS() bfin_read16(CAN1_STATUS) +#define bfin_write_CAN1_STATUS(val) bfin_write16(CAN1_STATUS, val) +#define bfin_read_CAN1_CEC() bfin_read16(CAN1_CEC) +#define bfin_write_CAN1_CEC(val) bfin_write16(CAN1_CEC, val) +#define bfin_read_CAN1_GIS() bfin_read16(CAN1_GIS) +#define bfin_write_CAN1_GIS(val) bfin_write16(CAN1_GIS, val) +#define bfin_read_CAN1_GIM() bfin_read16(CAN1_GIM) +#define bfin_write_CAN1_GIM(val) bfin_write16(CAN1_GIM, val) +#define bfin_read_CAN1_GIF() bfin_read16(CAN1_GIF) +#define bfin_write_CAN1_GIF(val) bfin_write16(CAN1_GIF, val) +#define bfin_read_CAN1_CONTROL() bfin_read16(CAN1_CONTROL) +#define bfin_write_CAN1_CONTROL(val) bfin_write16(CAN1_CONTROL, val) +#define bfin_read_CAN1_INTR() bfin_read16(CAN1_INTR) +#define bfin_write_CAN1_INTR(val) bfin_write16(CAN1_INTR, val) +#define bfin_read_CAN1_MBTD() bfin_read16(CAN1_MBTD) +#define bfin_write_CAN1_MBTD(val) bfin_write16(CAN1_MBTD, val) +#define bfin_read_CAN1_EWR() bfin_read16(CAN1_EWR) +#define bfin_write_CAN1_EWR(val) bfin_write16(CAN1_EWR, val) +#define bfin_read_CAN1_ESR() bfin_read16(CAN1_ESR) +#define bfin_write_CAN1_ESR(val) bfin_write16(CAN1_ESR, val) +#define bfin_read_CAN1_UCCNT() bfin_read16(CAN1_UCCNT) +#define bfin_write_CAN1_UCCNT(val) bfin_write16(CAN1_UCCNT, val) +#define bfin_read_CAN1_UCRC() bfin_read16(CAN1_UCRC) +#define bfin_write_CAN1_UCRC(val) bfin_write16(CAN1_UCRC, val) +#define bfin_read_CAN1_UCCNF() bfin_read16(CAN1_UCCNF) +#define bfin_write_CAN1_UCCNF(val) bfin_write16(CAN1_UCCNF, val) + +/* CAN Controller 1 Mailbox Accebfin_read_()tance Registers */ + +#define bfin_read_CAN1_AM00L() bfin_read16(CAN1_AM00L) +#define bfin_write_CAN1_AM00L(val) bfin_write16(CAN1_AM00L, val) +#define bfin_read_CAN1_AM00H() bfin_read16(CAN1_AM00H) +#define bfin_write_CAN1_AM00H(val) bfin_write16(CAN1_AM00H, val) +#define bfin_read_CAN1_AM01L() bfin_read16(CAN1_AM01L) +#define bfin_write_CAN1_AM01L(val) bfin_write16(CAN1_AM01L, val) +#define bfin_read_CAN1_AM01H() bfin_read16(CAN1_AM01H) +#define bfin_write_CAN1_AM01H(val) bfin_write16(CAN1_AM01H, val) +#define bfin_read_CAN1_AM02L() bfin_read16(CAN1_AM02L) +#define bfin_write_CAN1_AM02L(val) bfin_write16(CAN1_AM02L, val) +#define bfin_read_CAN1_AM02H() bfin_read16(CAN1_AM02H) +#define bfin_write_CAN1_AM02H(val) bfin_write16(CAN1_AM02H, val) +#define bfin_read_CAN1_AM03L() bfin_read16(CAN1_AM03L) +#define bfin_write_CAN1_AM03L(val) bfin_write16(CAN1_AM03L, val) +#define bfin_read_CAN1_AM03H() bfin_read16(CAN1_AM03H) +#define bfin_write_CAN1_AM03H(val) bfin_write16(CAN1_AM03H, val) +#define bfin_read_CAN1_AM04L() bfin_read16(CAN1_AM04L) +#define bfin_write_CAN1_AM04L(val) bfin_write16(CAN1_AM04L, val) +#define bfin_read_CAN1_AM04H() bfin_read16(CAN1_AM04H) +#define bfin_write_CAN1_AM04H(val) bfin_write16(CAN1_AM04H, val) +#define bfin_read_CAN1_AM05L() bfin_read16(CAN1_AM05L) +#define bfin_write_CAN1_AM05L(val) bfin_write16(CAN1_AM05L, val) +#define bfin_read_CAN1_AM05H() bfin_read16(CAN1_AM05H) +#define bfin_write_CAN1_AM05H(val) bfin_write16(CAN1_AM05H, val) +#define bfin_read_CAN1_AM06L() bfin_read16(CAN1_AM06L) +#define bfin_write_CAN1_AM06L(val) bfin_write16(CAN1_AM06L, val) +#define bfin_read_CAN1_AM06H() bfin_read16(CAN1_AM06H) +#define bfin_write_CAN1_AM06H(val) bfin_write16(CAN1_AM06H, val) +#define bfin_read_CAN1_AM07L() bfin_read16(CAN1_AM07L) +#define bfin_write_CAN1_AM07L(val) bfin_write16(CAN1_AM07L, val) +#define bfin_read_CAN1_AM07H() bfin_read16(CAN1_AM07H) +#define bfin_write_CAN1_AM07H(val) bfin_write16(CAN1_AM07H, val) +#define bfin_read_CAN1_AM08L() bfin_read16(CAN1_AM08L) +#define bfin_write_CAN1_AM08L(val) bfin_write16(CAN1_AM08L, val) +#define bfin_read_CAN1_AM08H() bfin_read16(CAN1_AM08H) +#define bfin_write_CAN1_AM08H(val) bfin_write16(CAN1_AM08H, val) +#define bfin_read_CAN1_AM09L() bfin_read16(CAN1_AM09L) +#define bfin_write_CAN1_AM09L(val) bfin_write16(CAN1_AM09L, val) +#define bfin_read_CAN1_AM09H() bfin_read16(CAN1_AM09H) +#define bfin_write_CAN1_AM09H(val) bfin_write16(CAN1_AM09H, val) +#define bfin_read_CAN1_AM10L() bfin_read16(CAN1_AM10L) +#define bfin_write_CAN1_AM10L(val) bfin_write16(CAN1_AM10L, val) +#define bfin_read_CAN1_AM10H() bfin_read16(CAN1_AM10H) +#define bfin_write_CAN1_AM10H(val) bfin_write16(CAN1_AM10H, val) +#define bfin_read_CAN1_AM11L() bfin_read16(CAN1_AM11L) +#define bfin_write_CAN1_AM11L(val) bfin_write16(CAN1_AM11L, val) +#define bfin_read_CAN1_AM11H() bfin_read16(CAN1_AM11H) +#define bfin_write_CAN1_AM11H(val) bfin_write16(CAN1_AM11H, val) +#define bfin_read_CAN1_AM12L() bfin_read16(CAN1_AM12L) +#define bfin_write_CAN1_AM12L(val) bfin_write16(CAN1_AM12L, val) +#define bfin_read_CAN1_AM12H() bfin_read16(CAN1_AM12H) +#define bfin_write_CAN1_AM12H(val) bfin_write16(CAN1_AM12H, val) +#define bfin_read_CAN1_AM13L() bfin_read16(CAN1_AM13L) +#define bfin_write_CAN1_AM13L(val) bfin_write16(CAN1_AM13L, val) +#define bfin_read_CAN1_AM13H() bfin_read16(CAN1_AM13H) +#define bfin_write_CAN1_AM13H(val) bfin_write16(CAN1_AM13H, val) +#define bfin_read_CAN1_AM14L() bfin_read16(CAN1_AM14L) +#define bfin_write_CAN1_AM14L(val) bfin_write16(CAN1_AM14L, val) +#define bfin_read_CAN1_AM14H() bfin_read16(CAN1_AM14H) +#define bfin_write_CAN1_AM14H(val) bfin_write16(CAN1_AM14H, val) +#define bfin_read_CAN1_AM15L() bfin_read16(CAN1_AM15L) +#define bfin_write_CAN1_AM15L(val) bfin_write16(CAN1_AM15L, val) +#define bfin_read_CAN1_AM15H() bfin_read16(CAN1_AM15H) +#define bfin_write_CAN1_AM15H(val) bfin_write16(CAN1_AM15H, val) + +/* CAN Controller 1 Mailbox Accebfin_read_()tance Registers */ + +#define bfin_read_CAN1_AM16L() bfin_read16(CAN1_AM16L) +#define bfin_write_CAN1_AM16L(val) bfin_write16(CAN1_AM16L, val) +#define bfin_read_CAN1_AM16H() bfin_read16(CAN1_AM16H) +#define bfin_write_CAN1_AM16H(val) bfin_write16(CAN1_AM16H, val) +#define bfin_read_CAN1_AM17L() bfin_read16(CAN1_AM17L) +#define bfin_write_CAN1_AM17L(val) bfin_write16(CAN1_AM17L, val) +#define bfin_read_CAN1_AM17H() bfin_read16(CAN1_AM17H) +#define bfin_write_CAN1_AM17H(val) bfin_write16(CAN1_AM17H, val) +#define bfin_read_CAN1_AM18L() bfin_read16(CAN1_AM18L) +#define bfin_write_CAN1_AM18L(val) bfin_write16(CAN1_AM18L, val) +#define bfin_read_CAN1_AM18H() bfin_read16(CAN1_AM18H) +#define bfin_write_CAN1_AM18H(val) bfin_write16(CAN1_AM18H, val) +#define bfin_read_CAN1_AM19L() bfin_read16(CAN1_AM19L) +#define bfin_write_CAN1_AM19L(val) bfin_write16(CAN1_AM19L, val) +#define bfin_read_CAN1_AM19H() bfin_read16(CAN1_AM19H) +#define bfin_write_CAN1_AM19H(val) bfin_write16(CAN1_AM19H, val) +#define bfin_read_CAN1_AM20L() bfin_read16(CAN1_AM20L) +#define bfin_write_CAN1_AM20L(val) bfin_write16(CAN1_AM20L, val) +#define bfin_read_CAN1_AM20H() bfin_read16(CAN1_AM20H) +#define bfin_write_CAN1_AM20H(val) bfin_write16(CAN1_AM20H, val) +#define bfin_read_CAN1_AM21L() bfin_read16(CAN1_AM21L) +#define bfin_write_CAN1_AM21L(val) bfin_write16(CAN1_AM21L, val) +#define bfin_read_CAN1_AM21H() bfin_read16(CAN1_AM21H) +#define bfin_write_CAN1_AM21H(val) bfin_write16(CAN1_AM21H, val) +#define bfin_read_CAN1_AM22L() bfin_read16(CAN1_AM22L) +#define bfin_write_CAN1_AM22L(val) bfin_write16(CAN1_AM22L, val) +#define bfin_read_CAN1_AM22H() bfin_read16(CAN1_AM22H) +#define bfin_write_CAN1_AM22H(val) bfin_write16(CAN1_AM22H, val) +#define bfin_read_CAN1_AM23L() bfin_read16(CAN1_AM23L) +#define bfin_write_CAN1_AM23L(val) bfin_write16(CAN1_AM23L, val) +#define bfin_read_CAN1_AM23H() bfin_read16(CAN1_AM23H) +#define bfin_write_CAN1_AM23H(val) bfin_write16(CAN1_AM23H, val) +#define bfin_read_CAN1_AM24L() bfin_read16(CAN1_AM24L) +#define bfin_write_CAN1_AM24L(val) bfin_write16(CAN1_AM24L, val) +#define bfin_read_CAN1_AM24H() bfin_read16(CAN1_AM24H) +#define bfin_write_CAN1_AM24H(val) bfin_write16(CAN1_AM24H, val) +#define bfin_read_CAN1_AM25L() bfin_read16(CAN1_AM25L) +#define bfin_write_CAN1_AM25L(val) bfin_write16(CAN1_AM25L, val) +#define bfin_read_CAN1_AM25H() bfin_read16(CAN1_AM25H) +#define bfin_write_CAN1_AM25H(val) bfin_write16(CAN1_AM25H, val) +#define bfin_read_CAN1_AM26L() bfin_read16(CAN1_AM26L) +#define bfin_write_CAN1_AM26L(val) bfin_write16(CAN1_AM26L, val) +#define bfin_read_CAN1_AM26H() bfin_read16(CAN1_AM26H) +#define bfin_write_CAN1_AM26H(val) bfin_write16(CAN1_AM26H, val) +#define bfin_read_CAN1_AM27L() bfin_read16(CAN1_AM27L) +#define bfin_write_CAN1_AM27L(val) bfin_write16(CAN1_AM27L, val) +#define bfin_read_CAN1_AM27H() bfin_read16(CAN1_AM27H) +#define bfin_write_CAN1_AM27H(val) bfin_write16(CAN1_AM27H, val) +#define bfin_read_CAN1_AM28L() bfin_read16(CAN1_AM28L) +#define bfin_write_CAN1_AM28L(val) bfin_write16(CAN1_AM28L, val) +#define bfin_read_CAN1_AM28H() bfin_read16(CAN1_AM28H) +#define bfin_write_CAN1_AM28H(val) bfin_write16(CAN1_AM28H, val) +#define bfin_read_CAN1_AM29L() bfin_read16(CAN1_AM29L) +#define bfin_write_CAN1_AM29L(val) bfin_write16(CAN1_AM29L, val) +#define bfin_read_CAN1_AM29H() bfin_read16(CAN1_AM29H) +#define bfin_write_CAN1_AM29H(val) bfin_write16(CAN1_AM29H, val) +#define bfin_read_CAN1_AM30L() bfin_read16(CAN1_AM30L) +#define bfin_write_CAN1_AM30L(val) bfin_write16(CAN1_AM30L, val) +#define bfin_read_CAN1_AM30H() bfin_read16(CAN1_AM30H) +#define bfin_write_CAN1_AM30H(val) bfin_write16(CAN1_AM30H, val) +#define bfin_read_CAN1_AM31L() bfin_read16(CAN1_AM31L) +#define bfin_write_CAN1_AM31L(val) bfin_write16(CAN1_AM31L, val) +#define bfin_read_CAN1_AM31H() bfin_read16(CAN1_AM31H) +#define bfin_write_CAN1_AM31H(val) bfin_write16(CAN1_AM31H, val) + +/* CAN Controller 1 Mailbox Data Registers */ + +#define bfin_read_CAN1_MB00_DATA0() bfin_read16(CAN1_MB00_DATA0) +#define bfin_write_CAN1_MB00_DATA0(val) bfin_write16(CAN1_MB00_DATA0, val) +#define bfin_read_CAN1_MB00_DATA1() bfin_read16(CAN1_MB00_DATA1) +#define bfin_write_CAN1_MB00_DATA1(val) bfin_write16(CAN1_MB00_DATA1, val) +#define bfin_read_CAN1_MB00_DATA2() bfin_read16(CAN1_MB00_DATA2) +#define bfin_write_CAN1_MB00_DATA2(val) bfin_write16(CAN1_MB00_DATA2, val) +#define bfin_read_CAN1_MB00_DATA3() bfin_read16(CAN1_MB00_DATA3) +#define bfin_write_CAN1_MB00_DATA3(val) bfin_write16(CAN1_MB00_DATA3, val) +#define bfin_read_CAN1_MB00_LENGTH() bfin_read16(CAN1_MB00_LENGTH) +#define bfin_write_CAN1_MB00_LENGTH(val) bfin_write16(CAN1_MB00_LENGTH, val) +#define bfin_read_CAN1_MB00_TIMESTAMP() bfin_read16(CAN1_MB00_TIMESTAMP) +#define bfin_write_CAN1_MB00_TIMESTAMP(val) bfin_write16(CAN1_MB00_TIMESTAMP, val) +#define bfin_read_CAN1_MB00_ID0() bfin_read16(CAN1_MB00_ID0) +#define bfin_write_CAN1_MB00_ID0(val) bfin_write16(CAN1_MB00_ID0, val) +#define bfin_read_CAN1_MB00_ID1() bfin_read16(CAN1_MB00_ID1) +#define bfin_write_CAN1_MB00_ID1(val) bfin_write16(CAN1_MB00_ID1, val) +#define bfin_read_CAN1_MB01_DATA0() bfin_read16(CAN1_MB01_DATA0) +#define bfin_write_CAN1_MB01_DATA0(val) bfin_write16(CAN1_MB01_DATA0, val) +#define bfin_read_CAN1_MB01_DATA1() bfin_read16(CAN1_MB01_DATA1) +#define bfin_write_CAN1_MB01_DATA1(val) bfin_write16(CAN1_MB01_DATA1, val) +#define bfin_read_CAN1_MB01_DATA2() bfin_read16(CAN1_MB01_DATA2) +#define bfin_write_CAN1_MB01_DATA2(val) bfin_write16(CAN1_MB01_DATA2, val) +#define bfin_read_CAN1_MB01_DATA3() bfin_read16(CAN1_MB01_DATA3) +#define bfin_write_CAN1_MB01_DATA3(val) bfin_write16(CAN1_MB01_DATA3, val) +#define bfin_read_CAN1_MB01_LENGTH() bfin_read16(CAN1_MB01_LENGTH) +#define bfin_write_CAN1_MB01_LENGTH(val) bfin_write16(CAN1_MB01_LENGTH, val) +#define bfin_read_CAN1_MB01_TIMESTAMP() bfin_read16(CAN1_MB01_TIMESTAMP) +#define bfin_write_CAN1_MB01_TIMESTAMP(val) bfin_write16(CAN1_MB01_TIMESTAMP, val) +#define bfin_read_CAN1_MB01_ID0() bfin_read16(CAN1_MB01_ID0) +#define bfin_write_CAN1_MB01_ID0(val) bfin_write16(CAN1_MB01_ID0, val) +#define bfin_read_CAN1_MB01_ID1() bfin_read16(CAN1_MB01_ID1) +#define bfin_write_CAN1_MB01_ID1(val) bfin_write16(CAN1_MB01_ID1, val) +#define bfin_read_CAN1_MB02_DATA0() bfin_read16(CAN1_MB02_DATA0) +#define bfin_write_CAN1_MB02_DATA0(val) bfin_write16(CAN1_MB02_DATA0, val) +#define bfin_read_CAN1_MB02_DATA1() bfin_read16(CAN1_MB02_DATA1) +#define bfin_write_CAN1_MB02_DATA1(val) bfin_write16(CAN1_MB02_DATA1, val) +#define bfin_read_CAN1_MB02_DATA2() bfin_read16(CAN1_MB02_DATA2) +#define bfin_write_CAN1_MB02_DATA2(val) bfin_write16(CAN1_MB02_DATA2, val) +#define bfin_read_CAN1_MB02_DATA3() bfin_read16(CAN1_MB02_DATA3) +#define bfin_write_CAN1_MB02_DATA3(val) bfin_write16(CAN1_MB02_DATA3, val) +#define bfin_read_CAN1_MB02_LENGTH() bfin_read16(CAN1_MB02_LENGTH) +#define bfin_write_CAN1_MB02_LENGTH(val) bfin_write16(CAN1_MB02_LENGTH, val) +#define bfin_read_CAN1_MB02_TIMESTAMP() bfin_read16(CAN1_MB02_TIMESTAMP) +#define bfin_write_CAN1_MB02_TIMESTAMP(val) bfin_write16(CAN1_MB02_TIMESTAMP, val) +#define bfin_read_CAN1_MB02_ID0() bfin_read16(CAN1_MB02_ID0) +#define bfin_write_CAN1_MB02_ID0(val) bfin_write16(CAN1_MB02_ID0, val) +#define bfin_read_CAN1_MB02_ID1() bfin_read16(CAN1_MB02_ID1) +#define bfin_write_CAN1_MB02_ID1(val) bfin_write16(CAN1_MB02_ID1, val) +#define bfin_read_CAN1_MB03_DATA0() bfin_read16(CAN1_MB03_DATA0) +#define bfin_write_CAN1_MB03_DATA0(val) bfin_write16(CAN1_MB03_DATA0, val) +#define bfin_read_CAN1_MB03_DATA1() bfin_read16(CAN1_MB03_DATA1) +#define bfin_write_CAN1_MB03_DATA1(val) bfin_write16(CAN1_MB03_DATA1, val) +#define bfin_read_CAN1_MB03_DATA2() bfin_read16(CAN1_MB03_DATA2) +#define bfin_write_CAN1_MB03_DATA2(val) bfin_write16(CAN1_MB03_DATA2, val) +#define bfin_read_CAN1_MB03_DATA3() bfin_read16(CAN1_MB03_DATA3) +#define bfin_write_CAN1_MB03_DATA3(val) bfin_write16(CAN1_MB03_DATA3, val) +#define bfin_read_CAN1_MB03_LENGTH() bfin_read16(CAN1_MB03_LENGTH) +#define bfin_write_CAN1_MB03_LENGTH(val) bfin_write16(CAN1_MB03_LENGTH, val) +#define bfin_read_CAN1_MB03_TIMESTAMP() bfin_read16(CAN1_MB03_TIMESTAMP) +#define bfin_write_CAN1_MB03_TIMESTAMP(val) bfin_write16(CAN1_MB03_TIMESTAMP, val) +#define bfin_read_CAN1_MB03_ID0() bfin_read16(CAN1_MB03_ID0) +#define bfin_write_CAN1_MB03_ID0(val) bfin_write16(CAN1_MB03_ID0, val) +#define bfin_read_CAN1_MB03_ID1() bfin_read16(CAN1_MB03_ID1) +#define bfin_write_CAN1_MB03_ID1(val) bfin_write16(CAN1_MB03_ID1, val) +#define bfin_read_CAN1_MB04_DATA0() bfin_read16(CAN1_MB04_DATA0) +#define bfin_write_CAN1_MB04_DATA0(val) bfin_write16(CAN1_MB04_DATA0, val) +#define bfin_read_CAN1_MB04_DATA1() bfin_read16(CAN1_MB04_DATA1) +#define bfin_write_CAN1_MB04_DATA1(val) bfin_write16(CAN1_MB04_DATA1, val) +#define bfin_read_CAN1_MB04_DATA2() bfin_read16(CAN1_MB04_DATA2) +#define bfin_write_CAN1_MB04_DATA2(val) bfin_write16(CAN1_MB04_DATA2, val) +#define bfin_read_CAN1_MB04_DATA3() bfin_read16(CAN1_MB04_DATA3) +#define bfin_write_CAN1_MB04_DATA3(val) bfin_write16(CAN1_MB04_DATA3, val) +#define bfin_read_CAN1_MB04_LENGTH() bfin_read16(CAN1_MB04_LENGTH) +#define bfin_write_CAN1_MB04_LENGTH(val) bfin_write16(CAN1_MB04_LENGTH, val) +#define bfin_read_CAN1_MB04_TIMESTAMP() bfin_read16(CAN1_MB04_TIMESTAMP) +#define bfin_write_CAN1_MB04_TIMESTAMP(val) bfin_write16(CAN1_MB04_TIMESTAMP, val) +#define bfin_read_CAN1_MB04_ID0() bfin_read16(CAN1_MB04_ID0) +#define bfin_write_CAN1_MB04_ID0(val) bfin_write16(CAN1_MB04_ID0, val) +#define bfin_read_CAN1_MB04_ID1() bfin_read16(CAN1_MB04_ID1) +#define bfin_write_CAN1_MB04_ID1(val) bfin_write16(CAN1_MB04_ID1, val) +#define bfin_read_CAN1_MB05_DATA0() bfin_read16(CAN1_MB05_DATA0) +#define bfin_write_CAN1_MB05_DATA0(val) bfin_write16(CAN1_MB05_DATA0, val) +#define bfin_read_CAN1_MB05_DATA1() bfin_read16(CAN1_MB05_DATA1) +#define bfin_write_CAN1_MB05_DATA1(val) bfin_write16(CAN1_MB05_DATA1, val) +#define bfin_read_CAN1_MB05_DATA2() bfin_read16(CAN1_MB05_DATA2) +#define bfin_write_CAN1_MB05_DATA2(val) bfin_write16(CAN1_MB05_DATA2, val) +#define bfin_read_CAN1_MB05_DATA3() bfin_read16(CAN1_MB05_DATA3) +#define bfin_write_CAN1_MB05_DATA3(val) bfin_write16(CAN1_MB05_DATA3, val) +#define bfin_read_CAN1_MB05_LENGTH() bfin_read16(CAN1_MB05_LENGTH) +#define bfin_write_CAN1_MB05_LENGTH(val) bfin_write16(CAN1_MB05_LENGTH, val) +#define bfin_read_CAN1_MB05_TIMESTAMP() bfin_read16(CAN1_MB05_TIMESTAMP) +#define bfin_write_CAN1_MB05_TIMESTAMP(val) bfin_write16(CAN1_MB05_TIMESTAMP, val) +#define bfin_read_CAN1_MB05_ID0() bfin_read16(CAN1_MB05_ID0) +#define bfin_write_CAN1_MB05_ID0(val) bfin_write16(CAN1_MB05_ID0, val) +#define bfin_read_CAN1_MB05_ID1() bfin_read16(CAN1_MB05_ID1) +#define bfin_write_CAN1_MB05_ID1(val) bfin_write16(CAN1_MB05_ID1, val) +#define bfin_read_CAN1_MB06_DATA0() bfin_read16(CAN1_MB06_DATA0) +#define bfin_write_CAN1_MB06_DATA0(val) bfin_write16(CAN1_MB06_DATA0, val) +#define bfin_read_CAN1_MB06_DATA1() bfin_read16(CAN1_MB06_DATA1) +#define bfin_write_CAN1_MB06_DATA1(val) bfin_write16(CAN1_MB06_DATA1, val) +#define bfin_read_CAN1_MB06_DATA2() bfin_read16(CAN1_MB06_DATA2) +#define bfin_write_CAN1_MB06_DATA2(val) bfin_write16(CAN1_MB06_DATA2, val) +#define bfin_read_CAN1_MB06_DATA3() bfin_read16(CAN1_MB06_DATA3) +#define bfin_write_CAN1_MB06_DATA3(val) bfin_write16(CAN1_MB06_DATA3, val) +#define bfin_read_CAN1_MB06_LENGTH() bfin_read16(CAN1_MB06_LENGTH) +#define bfin_write_CAN1_MB06_LENGTH(val) bfin_write16(CAN1_MB06_LENGTH, val) +#define bfin_read_CAN1_MB06_TIMESTAMP() bfin_read16(CAN1_MB06_TIMESTAMP) +#define bfin_write_CAN1_MB06_TIMESTAMP(val) bfin_write16(CAN1_MB06_TIMESTAMP, val) +#define bfin_read_CAN1_MB06_ID0() bfin_read16(CAN1_MB06_ID0) +#define bfin_write_CAN1_MB06_ID0(val) bfin_write16(CAN1_MB06_ID0, val) +#define bfin_read_CAN1_MB06_ID1() bfin_read16(CAN1_MB06_ID1) +#define bfin_write_CAN1_MB06_ID1(val) bfin_write16(CAN1_MB06_ID1, val) +#define bfin_read_CAN1_MB07_DATA0() bfin_read16(CAN1_MB07_DATA0) +#define bfin_write_CAN1_MB07_DATA0(val) bfin_write16(CAN1_MB07_DATA0, val) +#define bfin_read_CAN1_MB07_DATA1() bfin_read16(CAN1_MB07_DATA1) +#define bfin_write_CAN1_MB07_DATA1(val) bfin_write16(CAN1_MB07_DATA1, val) +#define bfin_read_CAN1_MB07_DATA2() bfin_read16(CAN1_MB07_DATA2) +#define bfin_write_CAN1_MB07_DATA2(val) bfin_write16(CAN1_MB07_DATA2, val) +#define bfin_read_CAN1_MB07_DATA3() bfin_read16(CAN1_MB07_DATA3) +#define bfin_write_CAN1_MB07_DATA3(val) bfin_write16(CAN1_MB07_DATA3, val) +#define bfin_read_CAN1_MB07_LENGTH() bfin_read16(CAN1_MB07_LENGTH) +#define bfin_write_CAN1_MB07_LENGTH(val) bfin_write16(CAN1_MB07_LENGTH, val) +#define bfin_read_CAN1_MB07_TIMESTAMP() bfin_read16(CAN1_MB07_TIMESTAMP) +#define bfin_write_CAN1_MB07_TIMESTAMP(val) bfin_write16(CAN1_MB07_TIMESTAMP, val) +#define bfin_read_CAN1_MB07_ID0() bfin_read16(CAN1_MB07_ID0) +#define bfin_write_CAN1_MB07_ID0(val) bfin_write16(CAN1_MB07_ID0, val) +#define bfin_read_CAN1_MB07_ID1() bfin_read16(CAN1_MB07_ID1) +#define bfin_write_CAN1_MB07_ID1(val) bfin_write16(CAN1_MB07_ID1, val) +#define bfin_read_CAN1_MB08_DATA0() bfin_read16(CAN1_MB08_DATA0) +#define bfin_write_CAN1_MB08_DATA0(val) bfin_write16(CAN1_MB08_DATA0, val) +#define bfin_read_CAN1_MB08_DATA1() bfin_read16(CAN1_MB08_DATA1) +#define bfin_write_CAN1_MB08_DATA1(val) bfin_write16(CAN1_MB08_DATA1, val) +#define bfin_read_CAN1_MB08_DATA2() bfin_read16(CAN1_MB08_DATA2) +#define bfin_write_CAN1_MB08_DATA2(val) bfin_write16(CAN1_MB08_DATA2, val) +#define bfin_read_CAN1_MB08_DATA3() bfin_read16(CAN1_MB08_DATA3) +#define bfin_write_CAN1_MB08_DATA3(val) bfin_write16(CAN1_MB08_DATA3, val) +#define bfin_read_CAN1_MB08_LENGTH() bfin_read16(CAN1_MB08_LENGTH) +#define bfin_write_CAN1_MB08_LENGTH(val) bfin_write16(CAN1_MB08_LENGTH, val) +#define bfin_read_CAN1_MB08_TIMESTAMP() bfin_read16(CAN1_MB08_TIMESTAMP) +#define bfin_write_CAN1_MB08_TIMESTAMP(val) bfin_write16(CAN1_MB08_TIMESTAMP, val) +#define bfin_read_CAN1_MB08_ID0() bfin_read16(CAN1_MB08_ID0) +#define bfin_write_CAN1_MB08_ID0(val) bfin_write16(CAN1_MB08_ID0, val) +#define bfin_read_CAN1_MB08_ID1() bfin_read16(CAN1_MB08_ID1) +#define bfin_write_CAN1_MB08_ID1(val) bfin_write16(CAN1_MB08_ID1, val) +#define bfin_read_CAN1_MB09_DATA0() bfin_read16(CAN1_MB09_DATA0) +#define bfin_write_CAN1_MB09_DATA0(val) bfin_write16(CAN1_MB09_DATA0, val) +#define bfin_read_CAN1_MB09_DATA1() bfin_read16(CAN1_MB09_DATA1) +#define bfin_write_CAN1_MB09_DATA1(val) bfin_write16(CAN1_MB09_DATA1, val) +#define bfin_read_CAN1_MB09_DATA2() bfin_read16(CAN1_MB09_DATA2) +#define bfin_write_CAN1_MB09_DATA2(val) bfin_write16(CAN1_MB09_DATA2, val) +#define bfin_read_CAN1_MB09_DATA3() bfin_read16(CAN1_MB09_DATA3) +#define bfin_write_CAN1_MB09_DATA3(val) bfin_write16(CAN1_MB09_DATA3, val) +#define bfin_read_CAN1_MB09_LENGTH() bfin_read16(CAN1_MB09_LENGTH) +#define bfin_write_CAN1_MB09_LENGTH(val) bfin_write16(CAN1_MB09_LENGTH, val) +#define bfin_read_CAN1_MB09_TIMESTAMP() bfin_read16(CAN1_MB09_TIMESTAMP) +#define bfin_write_CAN1_MB09_TIMESTAMP(val) bfin_write16(CAN1_MB09_TIMESTAMP, val) +#define bfin_read_CAN1_MB09_ID0() bfin_read16(CAN1_MB09_ID0) +#define bfin_write_CAN1_MB09_ID0(val) bfin_write16(CAN1_MB09_ID0, val) +#define bfin_read_CAN1_MB09_ID1() bfin_read16(CAN1_MB09_ID1) +#define bfin_write_CAN1_MB09_ID1(val) bfin_write16(CAN1_MB09_ID1, val) +#define bfin_read_CAN1_MB10_DATA0() bfin_read16(CAN1_MB10_DATA0) +#define bfin_write_CAN1_MB10_DATA0(val) bfin_write16(CAN1_MB10_DATA0, val) +#define bfin_read_CAN1_MB10_DATA1() bfin_read16(CAN1_MB10_DATA1) +#define bfin_write_CAN1_MB10_DATA1(val) bfin_write16(CAN1_MB10_DATA1, val) +#define bfin_read_CAN1_MB10_DATA2() bfin_read16(CAN1_MB10_DATA2) +#define bfin_write_CAN1_MB10_DATA2(val) bfin_write16(CAN1_MB10_DATA2, val) +#define bfin_read_CAN1_MB10_DATA3() bfin_read16(CAN1_MB10_DATA3) +#define bfin_write_CAN1_MB10_DATA3(val) bfin_write16(CAN1_MB10_DATA3, val) +#define bfin_read_CAN1_MB10_LENGTH() bfin_read16(CAN1_MB10_LENGTH) +#define bfin_write_CAN1_MB10_LENGTH(val) bfin_write16(CAN1_MB10_LENGTH, val) +#define bfin_read_CAN1_MB10_TIMESTAMP() bfin_read16(CAN1_MB10_TIMESTAMP) +#define bfin_write_CAN1_MB10_TIMESTAMP(val) bfin_write16(CAN1_MB10_TIMESTAMP, val) +#define bfin_read_CAN1_MB10_ID0() bfin_read16(CAN1_MB10_ID0) +#define bfin_write_CAN1_MB10_ID0(val) bfin_write16(CAN1_MB10_ID0, val) +#define bfin_read_CAN1_MB10_ID1() bfin_read16(CAN1_MB10_ID1) +#define bfin_write_CAN1_MB10_ID1(val) bfin_write16(CAN1_MB10_ID1, val) +#define bfin_read_CAN1_MB11_DATA0() bfin_read16(CAN1_MB11_DATA0) +#define bfin_write_CAN1_MB11_DATA0(val) bfin_write16(CAN1_MB11_DATA0, val) +#define bfin_read_CAN1_MB11_DATA1() bfin_read16(CAN1_MB11_DATA1) +#define bfin_write_CAN1_MB11_DATA1(val) bfin_write16(CAN1_MB11_DATA1, val) +#define bfin_read_CAN1_MB11_DATA2() bfin_read16(CAN1_MB11_DATA2) +#define bfin_write_CAN1_MB11_DATA2(val) bfin_write16(CAN1_MB11_DATA2, val) +#define bfin_read_CAN1_MB11_DATA3() bfin_read16(CAN1_MB11_DATA3) +#define bfin_write_CAN1_MB11_DATA3(val) bfin_write16(CAN1_MB11_DATA3, val) +#define bfin_read_CAN1_MB11_LENGTH() bfin_read16(CAN1_MB11_LENGTH) +#define bfin_write_CAN1_MB11_LENGTH(val) bfin_write16(CAN1_MB11_LENGTH, val) +#define bfin_read_CAN1_MB11_TIMESTAMP() bfin_read16(CAN1_MB11_TIMESTAMP) +#define bfin_write_CAN1_MB11_TIMESTAMP(val) bfin_write16(CAN1_MB11_TIMESTAMP, val) +#define bfin_read_CAN1_MB11_ID0() bfin_read16(CAN1_MB11_ID0) +#define bfin_write_CAN1_MB11_ID0(val) bfin_write16(CAN1_MB11_ID0, val) +#define bfin_read_CAN1_MB11_ID1() bfin_read16(CAN1_MB11_ID1) +#define bfin_write_CAN1_MB11_ID1(val) bfin_write16(CAN1_MB11_ID1, val) +#define bfin_read_CAN1_MB12_DATA0() bfin_read16(CAN1_MB12_DATA0) +#define bfin_write_CAN1_MB12_DATA0(val) bfin_write16(CAN1_MB12_DATA0, val) +#define bfin_read_CAN1_MB12_DATA1() bfin_read16(CAN1_MB12_DATA1) +#define bfin_write_CAN1_MB12_DATA1(val) bfin_write16(CAN1_MB12_DATA1, val) +#define bfin_read_CAN1_MB12_DATA2() bfin_read16(CAN1_MB12_DATA2) +#define bfin_write_CAN1_MB12_DATA2(val) bfin_write16(CAN1_MB12_DATA2, val) +#define bfin_read_CAN1_MB12_DATA3() bfin_read16(CAN1_MB12_DATA3) +#define bfin_write_CAN1_MB12_DATA3(val) bfin_write16(CAN1_MB12_DATA3, val) +#define bfin_read_CAN1_MB12_LENGTH() bfin_read16(CAN1_MB12_LENGTH) +#define bfin_write_CAN1_MB12_LENGTH(val) bfin_write16(CAN1_MB12_LENGTH, val) +#define bfin_read_CAN1_MB12_TIMESTAMP() bfin_read16(CAN1_MB12_TIMESTAMP) +#define bfin_write_CAN1_MB12_TIMESTAMP(val) bfin_write16(CAN1_MB12_TIMESTAMP, val) +#define bfin_read_CAN1_MB12_ID0() bfin_read16(CAN1_MB12_ID0) +#define bfin_write_CAN1_MB12_ID0(val) bfin_write16(CAN1_MB12_ID0, val) +#define bfin_read_CAN1_MB12_ID1() bfin_read16(CAN1_MB12_ID1) +#define bfin_write_CAN1_MB12_ID1(val) bfin_write16(CAN1_MB12_ID1, val) +#define bfin_read_CAN1_MB13_DATA0() bfin_read16(CAN1_MB13_DATA0) +#define bfin_write_CAN1_MB13_DATA0(val) bfin_write16(CAN1_MB13_DATA0, val) +#define bfin_read_CAN1_MB13_DATA1() bfin_read16(CAN1_MB13_DATA1) +#define bfin_write_CAN1_MB13_DATA1(val) bfin_write16(CAN1_MB13_DATA1, val) +#define bfin_read_CAN1_MB13_DATA2() bfin_read16(CAN1_MB13_DATA2) +#define bfin_write_CAN1_MB13_DATA2(val) bfin_write16(CAN1_MB13_DATA2, val) +#define bfin_read_CAN1_MB13_DATA3() bfin_read16(CAN1_MB13_DATA3) +#define bfin_write_CAN1_MB13_DATA3(val) bfin_write16(CAN1_MB13_DATA3, val) +#define bfin_read_CAN1_MB13_LENGTH() bfin_read16(CAN1_MB13_LENGTH) +#define bfin_write_CAN1_MB13_LENGTH(val) bfin_write16(CAN1_MB13_LENGTH, val) +#define bfin_read_CAN1_MB13_TIMESTAMP() bfin_read16(CAN1_MB13_TIMESTAMP) +#define bfin_write_CAN1_MB13_TIMESTAMP(val) bfin_write16(CAN1_MB13_TIMESTAMP, val) +#define bfin_read_CAN1_MB13_ID0() bfin_read16(CAN1_MB13_ID0) +#define bfin_write_CAN1_MB13_ID0(val) bfin_write16(CAN1_MB13_ID0, val) +#define bfin_read_CAN1_MB13_ID1() bfin_read16(CAN1_MB13_ID1) +#define bfin_write_CAN1_MB13_ID1(val) bfin_write16(CAN1_MB13_ID1, val) +#define bfin_read_CAN1_MB14_DATA0() bfin_read16(CAN1_MB14_DATA0) +#define bfin_write_CAN1_MB14_DATA0(val) bfin_write16(CAN1_MB14_DATA0, val) +#define bfin_read_CAN1_MB14_DATA1() bfin_read16(CAN1_MB14_DATA1) +#define bfin_write_CAN1_MB14_DATA1(val) bfin_write16(CAN1_MB14_DATA1, val) +#define bfin_read_CAN1_MB14_DATA2() bfin_read16(CAN1_MB14_DATA2) +#define bfin_write_CAN1_MB14_DATA2(val) bfin_write16(CAN1_MB14_DATA2, val) +#define bfin_read_CAN1_MB14_DATA3() bfin_read16(CAN1_MB14_DATA3) +#define bfin_write_CAN1_MB14_DATA3(val) bfin_write16(CAN1_MB14_DATA3, val) +#define bfin_read_CAN1_MB14_LENGTH() bfin_read16(CAN1_MB14_LENGTH) +#define bfin_write_CAN1_MB14_LENGTH(val) bfin_write16(CAN1_MB14_LENGTH, val) +#define bfin_read_CAN1_MB14_TIMESTAMP() bfin_read16(CAN1_MB14_TIMESTAMP) +#define bfin_write_CAN1_MB14_TIMESTAMP(val) bfin_write16(CAN1_MB14_TIMESTAMP, val) +#define bfin_read_CAN1_MB14_ID0() bfin_read16(CAN1_MB14_ID0) +#define bfin_write_CAN1_MB14_ID0(val) bfin_write16(CAN1_MB14_ID0, val) +#define bfin_read_CAN1_MB14_ID1() bfin_read16(CAN1_MB14_ID1) +#define bfin_write_CAN1_MB14_ID1(val) bfin_write16(CAN1_MB14_ID1, val) +#define bfin_read_CAN1_MB15_DATA0() bfin_read16(CAN1_MB15_DATA0) +#define bfin_write_CAN1_MB15_DATA0(val) bfin_write16(CAN1_MB15_DATA0, val) +#define bfin_read_CAN1_MB15_DATA1() bfin_read16(CAN1_MB15_DATA1) +#define bfin_write_CAN1_MB15_DATA1(val) bfin_write16(CAN1_MB15_DATA1, val) +#define bfin_read_CAN1_MB15_DATA2() bfin_read16(CAN1_MB15_DATA2) +#define bfin_write_CAN1_MB15_DATA2(val) bfin_write16(CAN1_MB15_DATA2, val) +#define bfin_read_CAN1_MB15_DATA3() bfin_read16(CAN1_MB15_DATA3) +#define bfin_write_CAN1_MB15_DATA3(val) bfin_write16(CAN1_MB15_DATA3, val) +#define bfin_read_CAN1_MB15_LENGTH() bfin_read16(CAN1_MB15_LENGTH) +#define bfin_write_CAN1_MB15_LENGTH(val) bfin_write16(CAN1_MB15_LENGTH, val) +#define bfin_read_CAN1_MB15_TIMESTAMP() bfin_read16(CAN1_MB15_TIMESTAMP) +#define bfin_write_CAN1_MB15_TIMESTAMP(val) bfin_write16(CAN1_MB15_TIMESTAMP, val) +#define bfin_read_CAN1_MB15_ID0() bfin_read16(CAN1_MB15_ID0) +#define bfin_write_CAN1_MB15_ID0(val) bfin_write16(CAN1_MB15_ID0, val) +#define bfin_read_CAN1_MB15_ID1() bfin_read16(CAN1_MB15_ID1) +#define bfin_write_CAN1_MB15_ID1(val) bfin_write16(CAN1_MB15_ID1, val) + +/* CAN Controller 1 Mailbox Data Registers */ + +#define bfin_read_CAN1_MB16_DATA0() bfin_read16(CAN1_MB16_DATA0) +#define bfin_write_CAN1_MB16_DATA0(val) bfin_write16(CAN1_MB16_DATA0, val) +#define bfin_read_CAN1_MB16_DATA1() bfin_read16(CAN1_MB16_DATA1) +#define bfin_write_CAN1_MB16_DATA1(val) bfin_write16(CAN1_MB16_DATA1, val) +#define bfin_read_CAN1_MB16_DATA2() bfin_read16(CAN1_MB16_DATA2) +#define bfin_write_CAN1_MB16_DATA2(val) bfin_write16(CAN1_MB16_DATA2, val) +#define bfin_read_CAN1_MB16_DATA3() bfin_read16(CAN1_MB16_DATA3) +#define bfin_write_CAN1_MB16_DATA3(val) bfin_write16(CAN1_MB16_DATA3, val) +#define bfin_read_CAN1_MB16_LENGTH() bfin_read16(CAN1_MB16_LENGTH) +#define bfin_write_CAN1_MB16_LENGTH(val) bfin_write16(CAN1_MB16_LENGTH, val) +#define bfin_read_CAN1_MB16_TIMESTAMP() bfin_read16(CAN1_MB16_TIMESTAMP) +#define bfin_write_CAN1_MB16_TIMESTAMP(val) bfin_write16(CAN1_MB16_TIMESTAMP, val) +#define bfin_read_CAN1_MB16_ID0() bfin_read16(CAN1_MB16_ID0) +#define bfin_write_CAN1_MB16_ID0(val) bfin_write16(CAN1_MB16_ID0, val) +#define bfin_read_CAN1_MB16_ID1() bfin_read16(CAN1_MB16_ID1) +#define bfin_write_CAN1_MB16_ID1(val) bfin_write16(CAN1_MB16_ID1, val) +#define bfin_read_CAN1_MB17_DATA0() bfin_read16(CAN1_MB17_DATA0) +#define bfin_write_CAN1_MB17_DATA0(val) bfin_write16(CAN1_MB17_DATA0, val) +#define bfin_read_CAN1_MB17_DATA1() bfin_read16(CAN1_MB17_DATA1) +#define bfin_write_CAN1_MB17_DATA1(val) bfin_write16(CAN1_MB17_DATA1, val) +#define bfin_read_CAN1_MB17_DATA2() bfin_read16(CAN1_MB17_DATA2) +#define bfin_write_CAN1_MB17_DATA2(val) bfin_write16(CAN1_MB17_DATA2, val) +#define bfin_read_CAN1_MB17_DATA3() bfin_read16(CAN1_MB17_DATA3) +#define bfin_write_CAN1_MB17_DATA3(val) bfin_write16(CAN1_MB17_DATA3, val) +#define bfin_read_CAN1_MB17_LENGTH() bfin_read16(CAN1_MB17_LENGTH) +#define bfin_write_CAN1_MB17_LENGTH(val) bfin_write16(CAN1_MB17_LENGTH, val) +#define bfin_read_CAN1_MB17_TIMESTAMP() bfin_read16(CAN1_MB17_TIMESTAMP) +#define bfin_write_CAN1_MB17_TIMESTAMP(val) bfin_write16(CAN1_MB17_TIMESTAMP, val) +#define bfin_read_CAN1_MB17_ID0() bfin_read16(CAN1_MB17_ID0) +#define bfin_write_CAN1_MB17_ID0(val) bfin_write16(CAN1_MB17_ID0, val) +#define bfin_read_CAN1_MB17_ID1() bfin_read16(CAN1_MB17_ID1) +#define bfin_write_CAN1_MB17_ID1(val) bfin_write16(CAN1_MB17_ID1, val) +#define bfin_read_CAN1_MB18_DATA0() bfin_read16(CAN1_MB18_DATA0) +#define bfin_write_CAN1_MB18_DATA0(val) bfin_write16(CAN1_MB18_DATA0, val) +#define bfin_read_CAN1_MB18_DATA1() bfin_read16(CAN1_MB18_DATA1) +#define bfin_write_CAN1_MB18_DATA1(val) bfin_write16(CAN1_MB18_DATA1, val) +#define bfin_read_CAN1_MB18_DATA2() bfin_read16(CAN1_MB18_DATA2) +#define bfin_write_CAN1_MB18_DATA2(val) bfin_write16(CAN1_MB18_DATA2, val) +#define bfin_read_CAN1_MB18_DATA3() bfin_read16(CAN1_MB18_DATA3) +#define bfin_write_CAN1_MB18_DATA3(val) bfin_write16(CAN1_MB18_DATA3, val) +#define bfin_read_CAN1_MB18_LENGTH() bfin_read16(CAN1_MB18_LENGTH) +#define bfin_write_CAN1_MB18_LENGTH(val) bfin_write16(CAN1_MB18_LENGTH, val) +#define bfin_read_CAN1_MB18_TIMESTAMP() bfin_read16(CAN1_MB18_TIMESTAMP) +#define bfin_write_CAN1_MB18_TIMESTAMP(val) bfin_write16(CAN1_MB18_TIMESTAMP, val) +#define bfin_read_CAN1_MB18_ID0() bfin_read16(CAN1_MB18_ID0) +#define bfin_write_CAN1_MB18_ID0(val) bfin_write16(CAN1_MB18_ID0, val) +#define bfin_read_CAN1_MB18_ID1() bfin_read16(CAN1_MB18_ID1) +#define bfin_write_CAN1_MB18_ID1(val) bfin_write16(CAN1_MB18_ID1, val) +#define bfin_read_CAN1_MB19_DATA0() bfin_read16(CAN1_MB19_DATA0) +#define bfin_write_CAN1_MB19_DATA0(val) bfin_write16(CAN1_MB19_DATA0, val) +#define bfin_read_CAN1_MB19_DATA1() bfin_read16(CAN1_MB19_DATA1) +#define bfin_write_CAN1_MB19_DATA1(val) bfin_write16(CAN1_MB19_DATA1, val) +#define bfin_read_CAN1_MB19_DATA2() bfin_read16(CAN1_MB19_DATA2) +#define bfin_write_CAN1_MB19_DATA2(val) bfin_write16(CAN1_MB19_DATA2, val) +#define bfin_read_CAN1_MB19_DATA3() bfin_read16(CAN1_MB19_DATA3) +#define bfin_write_CAN1_MB19_DATA3(val) bfin_write16(CAN1_MB19_DATA3, val) +#define bfin_read_CAN1_MB19_LENGTH() bfin_read16(CAN1_MB19_LENGTH) +#define bfin_write_CAN1_MB19_LENGTH(val) bfin_write16(CAN1_MB19_LENGTH, val) +#define bfin_read_CAN1_MB19_TIMESTAMP() bfin_read16(CAN1_MB19_TIMESTAMP) +#define bfin_write_CAN1_MB19_TIMESTAMP(val) bfin_write16(CAN1_MB19_TIMESTAMP, val) +#define bfin_read_CAN1_MB19_ID0() bfin_read16(CAN1_MB19_ID0) +#define bfin_write_CAN1_MB19_ID0(val) bfin_write16(CAN1_MB19_ID0, val) +#define bfin_read_CAN1_MB19_ID1() bfin_read16(CAN1_MB19_ID1) +#define bfin_write_CAN1_MB19_ID1(val) bfin_write16(CAN1_MB19_ID1, val) +#define bfin_read_CAN1_MB20_DATA0() bfin_read16(CAN1_MB20_DATA0) +#define bfin_write_CAN1_MB20_DATA0(val) bfin_write16(CAN1_MB20_DATA0, val) +#define bfin_read_CAN1_MB20_DATA1() bfin_read16(CAN1_MB20_DATA1) +#define bfin_write_CAN1_MB20_DATA1(val) bfin_write16(CAN1_MB20_DATA1, val) +#define bfin_read_CAN1_MB20_DATA2() bfin_read16(CAN1_MB20_DATA2) +#define bfin_write_CAN1_MB20_DATA2(val) bfin_write16(CAN1_MB20_DATA2, val) +#define bfin_read_CAN1_MB20_DATA3() bfin_read16(CAN1_MB20_DATA3) +#define bfin_write_CAN1_MB20_DATA3(val) bfin_write16(CAN1_MB20_DATA3, val) +#define bfin_read_CAN1_MB20_LENGTH() bfin_read16(CAN1_MB20_LENGTH) +#define bfin_write_CAN1_MB20_LENGTH(val) bfin_write16(CAN1_MB20_LENGTH, val) +#define bfin_read_CAN1_MB20_TIMESTAMP() bfin_read16(CAN1_MB20_TIMESTAMP) +#define bfin_write_CAN1_MB20_TIMESTAMP(val) bfin_write16(CAN1_MB20_TIMESTAMP, val) +#define bfin_read_CAN1_MB20_ID0() bfin_read16(CAN1_MB20_ID0) +#define bfin_write_CAN1_MB20_ID0(val) bfin_write16(CAN1_MB20_ID0, val) +#define bfin_read_CAN1_MB20_ID1() bfin_read16(CAN1_MB20_ID1) +#define bfin_write_CAN1_MB20_ID1(val) bfin_write16(CAN1_MB20_ID1, val) +#define bfin_read_CAN1_MB21_DATA0() bfin_read16(CAN1_MB21_DATA0) +#define bfin_write_CAN1_MB21_DATA0(val) bfin_write16(CAN1_MB21_DATA0, val) +#define bfin_read_CAN1_MB21_DATA1() bfin_read16(CAN1_MB21_DATA1) +#define bfin_write_CAN1_MB21_DATA1(val) bfin_write16(CAN1_MB21_DATA1, val) +#define bfin_read_CAN1_MB21_DATA2() bfin_read16(CAN1_MB21_DATA2) +#define bfin_write_CAN1_MB21_DATA2(val) bfin_write16(CAN1_MB21_DATA2, val) +#define bfin_read_CAN1_MB21_DATA3() bfin_read16(CAN1_MB21_DATA3) +#define bfin_write_CAN1_MB21_DATA3(val) bfin_write16(CAN1_MB21_DATA3, val) +#define bfin_read_CAN1_MB21_LENGTH() bfin_read16(CAN1_MB21_LENGTH) +#define bfin_write_CAN1_MB21_LENGTH(val) bfin_write16(CAN1_MB21_LENGTH, val) +#define bfin_read_CAN1_MB21_TIMESTAMP() bfin_read16(CAN1_MB21_TIMESTAMP) +#define bfin_write_CAN1_MB21_TIMESTAMP(val) bfin_write16(CAN1_MB21_TIMESTAMP, val) +#define bfin_read_CAN1_MB21_ID0() bfin_read16(CAN1_MB21_ID0) +#define bfin_write_CAN1_MB21_ID0(val) bfin_write16(CAN1_MB21_ID0, val) +#define bfin_read_CAN1_MB21_ID1() bfin_read16(CAN1_MB21_ID1) +#define bfin_write_CAN1_MB21_ID1(val) bfin_write16(CAN1_MB21_ID1, val) +#define bfin_read_CAN1_MB22_DATA0() bfin_read16(CAN1_MB22_DATA0) +#define bfin_write_CAN1_MB22_DATA0(val) bfin_write16(CAN1_MB22_DATA0, val) +#define bfin_read_CAN1_MB22_DATA1() bfin_read16(CAN1_MB22_DATA1) +#define bfin_write_CAN1_MB22_DATA1(val) bfin_write16(CAN1_MB22_DATA1, val) +#define bfin_read_CAN1_MB22_DATA2() bfin_read16(CAN1_MB22_DATA2) +#define bfin_write_CAN1_MB22_DATA2(val) bfin_write16(CAN1_MB22_DATA2, val) +#define bfin_read_CAN1_MB22_DATA3() bfin_read16(CAN1_MB22_DATA3) +#define bfin_write_CAN1_MB22_DATA3(val) bfin_write16(CAN1_MB22_DATA3, val) +#define bfin_read_CAN1_MB22_LENGTH() bfin_read16(CAN1_MB22_LENGTH) +#define bfin_write_CAN1_MB22_LENGTH(val) bfin_write16(CAN1_MB22_LENGTH, val) +#define bfin_read_CAN1_MB22_TIMESTAMP() bfin_read16(CAN1_MB22_TIMESTAMP) +#define bfin_write_CAN1_MB22_TIMESTAMP(val) bfin_write16(CAN1_MB22_TIMESTAMP, val) +#define bfin_read_CAN1_MB22_ID0() bfin_read16(CAN1_MB22_ID0) +#define bfin_write_CAN1_MB22_ID0(val) bfin_write16(CAN1_MB22_ID0, val) +#define bfin_read_CAN1_MB22_ID1() bfin_read16(CAN1_MB22_ID1) +#define bfin_write_CAN1_MB22_ID1(val) bfin_write16(CAN1_MB22_ID1, val) +#define bfin_read_CAN1_MB23_DATA0() bfin_read16(CAN1_MB23_DATA0) +#define bfin_write_CAN1_MB23_DATA0(val) bfin_write16(CAN1_MB23_DATA0, val) +#define bfin_read_CAN1_MB23_DATA1() bfin_read16(CAN1_MB23_DATA1) +#define bfin_write_CAN1_MB23_DATA1(val) bfin_write16(CAN1_MB23_DATA1, val) +#define bfin_read_CAN1_MB23_DATA2() bfin_read16(CAN1_MB23_DATA2) +#define bfin_write_CAN1_MB23_DATA2(val) bfin_write16(CAN1_MB23_DATA2, val) +#define bfin_read_CAN1_MB23_DATA3() bfin_read16(CAN1_MB23_DATA3) +#define bfin_write_CAN1_MB23_DATA3(val) bfin_write16(CAN1_MB23_DATA3, val) +#define bfin_read_CAN1_MB23_LENGTH() bfin_read16(CAN1_MB23_LENGTH) +#define bfin_write_CAN1_MB23_LENGTH(val) bfin_write16(CAN1_MB23_LENGTH, val) +#define bfin_read_CAN1_MB23_TIMESTAMP() bfin_read16(CAN1_MB23_TIMESTAMP) +#define bfin_write_CAN1_MB23_TIMESTAMP(val) bfin_write16(CAN1_MB23_TIMESTAMP, val) +#define bfin_read_CAN1_MB23_ID0() bfin_read16(CAN1_MB23_ID0) +#define bfin_write_CAN1_MB23_ID0(val) bfin_write16(CAN1_MB23_ID0, val) +#define bfin_read_CAN1_MB23_ID1() bfin_read16(CAN1_MB23_ID1) +#define bfin_write_CAN1_MB23_ID1(val) bfin_write16(CAN1_MB23_ID1, val) +#define bfin_read_CAN1_MB24_DATA0() bfin_read16(CAN1_MB24_DATA0) +#define bfin_write_CAN1_MB24_DATA0(val) bfin_write16(CAN1_MB24_DATA0, val) +#define bfin_read_CAN1_MB24_DATA1() bfin_read16(CAN1_MB24_DATA1) +#define bfin_write_CAN1_MB24_DATA1(val) bfin_write16(CAN1_MB24_DATA1, val) +#define bfin_read_CAN1_MB24_DATA2() bfin_read16(CAN1_MB24_DATA2) +#define bfin_write_CAN1_MB24_DATA2(val) bfin_write16(CAN1_MB24_DATA2, val) +#define bfin_read_CAN1_MB24_DATA3() bfin_read16(CAN1_MB24_DATA3) +#define bfin_write_CAN1_MB24_DATA3(val) bfin_write16(CAN1_MB24_DATA3, val) +#define bfin_read_CAN1_MB24_LENGTH() bfin_read16(CAN1_MB24_LENGTH) +#define bfin_write_CAN1_MB24_LENGTH(val) bfin_write16(CAN1_MB24_LENGTH, val) +#define bfin_read_CAN1_MB24_TIMESTAMP() bfin_read16(CAN1_MB24_TIMESTAMP) +#define bfin_write_CAN1_MB24_TIMESTAMP(val) bfin_write16(CAN1_MB24_TIMESTAMP, val) +#define bfin_read_CAN1_MB24_ID0() bfin_read16(CAN1_MB24_ID0) +#define bfin_write_CAN1_MB24_ID0(val) bfin_write16(CAN1_MB24_ID0, val) +#define bfin_read_CAN1_MB24_ID1() bfin_read16(CAN1_MB24_ID1) +#define bfin_write_CAN1_MB24_ID1(val) bfin_write16(CAN1_MB24_ID1, val) +#define bfin_read_CAN1_MB25_DATA0() bfin_read16(CAN1_MB25_DATA0) +#define bfin_write_CAN1_MB25_DATA0(val) bfin_write16(CAN1_MB25_DATA0, val) +#define bfin_read_CAN1_MB25_DATA1() bfin_read16(CAN1_MB25_DATA1) +#define bfin_write_CAN1_MB25_DATA1(val) bfin_write16(CAN1_MB25_DATA1, val) +#define bfin_read_CAN1_MB25_DATA2() bfin_read16(CAN1_MB25_DATA2) +#define bfin_write_CAN1_MB25_DATA2(val) bfin_write16(CAN1_MB25_DATA2, val) +#define bfin_read_CAN1_MB25_DATA3() bfin_read16(CAN1_MB25_DATA3) +#define bfin_write_CAN1_MB25_DATA3(val) bfin_write16(CAN1_MB25_DATA3, val) +#define bfin_read_CAN1_MB25_LENGTH() bfin_read16(CAN1_MB25_LENGTH) +#define bfin_write_CAN1_MB25_LENGTH(val) bfin_write16(CAN1_MB25_LENGTH, val) +#define bfin_read_CAN1_MB25_TIMESTAMP() bfin_read16(CAN1_MB25_TIMESTAMP) +#define bfin_write_CAN1_MB25_TIMESTAMP(val) bfin_write16(CAN1_MB25_TIMESTAMP, val) +#define bfin_read_CAN1_MB25_ID0() bfin_read16(CAN1_MB25_ID0) +#define bfin_write_CAN1_MB25_ID0(val) bfin_write16(CAN1_MB25_ID0, val) +#define bfin_read_CAN1_MB25_ID1() bfin_read16(CAN1_MB25_ID1) +#define bfin_write_CAN1_MB25_ID1(val) bfin_write16(CAN1_MB25_ID1, val) +#define bfin_read_CAN1_MB26_DATA0() bfin_read16(CAN1_MB26_DATA0) +#define bfin_write_CAN1_MB26_DATA0(val) bfin_write16(CAN1_MB26_DATA0, val) +#define bfin_read_CAN1_MB26_DATA1() bfin_read16(CAN1_MB26_DATA1) +#define bfin_write_CAN1_MB26_DATA1(val) bfin_write16(CAN1_MB26_DATA1, val) +#define bfin_read_CAN1_MB26_DATA2() bfin_read16(CAN1_MB26_DATA2) +#define bfin_write_CAN1_MB26_DATA2(val) bfin_write16(CAN1_MB26_DATA2, val) +#define bfin_read_CAN1_MB26_DATA3() bfin_read16(CAN1_MB26_DATA3) +#define bfin_write_CAN1_MB26_DATA3(val) bfin_write16(CAN1_MB26_DATA3, val) +#define bfin_read_CAN1_MB26_LENGTH() bfin_read16(CAN1_MB26_LENGTH) +#define bfin_write_CAN1_MB26_LENGTH(val) bfin_write16(CAN1_MB26_LENGTH, val) +#define bfin_read_CAN1_MB26_TIMESTAMP() bfin_read16(CAN1_MB26_TIMESTAMP) +#define bfin_write_CAN1_MB26_TIMESTAMP(val) bfin_write16(CAN1_MB26_TIMESTAMP, val) +#define bfin_read_CAN1_MB26_ID0() bfin_read16(CAN1_MB26_ID0) +#define bfin_write_CAN1_MB26_ID0(val) bfin_write16(CAN1_MB26_ID0, val) +#define bfin_read_CAN1_MB26_ID1() bfin_read16(CAN1_MB26_ID1) +#define bfin_write_CAN1_MB26_ID1(val) bfin_write16(CAN1_MB26_ID1, val) +#define bfin_read_CAN1_MB27_DATA0() bfin_read16(CAN1_MB27_DATA0) +#define bfin_write_CAN1_MB27_DATA0(val) bfin_write16(CAN1_MB27_DATA0, val) +#define bfin_read_CAN1_MB27_DATA1() bfin_read16(CAN1_MB27_DATA1) +#define bfin_write_CAN1_MB27_DATA1(val) bfin_write16(CAN1_MB27_DATA1, val) +#define bfin_read_CAN1_MB27_DATA2() bfin_read16(CAN1_MB27_DATA2) +#define bfin_write_CAN1_MB27_DATA2(val) bfin_write16(CAN1_MB27_DATA2, val) +#define bfin_read_CAN1_MB27_DATA3() bfin_read16(CAN1_MB27_DATA3) +#define bfin_write_CAN1_MB27_DATA3(val) bfin_write16(CAN1_MB27_DATA3, val) +#define bfin_read_CAN1_MB27_LENGTH() bfin_read16(CAN1_MB27_LENGTH) +#define bfin_write_CAN1_MB27_LENGTH(val) bfin_write16(CAN1_MB27_LENGTH, val) +#define bfin_read_CAN1_MB27_TIMESTAMP() bfin_read16(CAN1_MB27_TIMESTAMP) +#define bfin_write_CAN1_MB27_TIMESTAMP(val) bfin_write16(CAN1_MB27_TIMESTAMP, val) +#define bfin_read_CAN1_MB27_ID0() bfin_read16(CAN1_MB27_ID0) +#define bfin_write_CAN1_MB27_ID0(val) bfin_write16(CAN1_MB27_ID0, val) +#define bfin_read_CAN1_MB27_ID1() bfin_read16(CAN1_MB27_ID1) +#define bfin_write_CAN1_MB27_ID1(val) bfin_write16(CAN1_MB27_ID1, val) +#define bfin_read_CAN1_MB28_DATA0() bfin_read16(CAN1_MB28_DATA0) +#define bfin_write_CAN1_MB28_DATA0(val) bfin_write16(CAN1_MB28_DATA0, val) +#define bfin_read_CAN1_MB28_DATA1() bfin_read16(CAN1_MB28_DATA1) +#define bfin_write_CAN1_MB28_DATA1(val) bfin_write16(CAN1_MB28_DATA1, val) +#define bfin_read_CAN1_MB28_DATA2() bfin_read16(CAN1_MB28_DATA2) +#define bfin_write_CAN1_MB28_DATA2(val) bfin_write16(CAN1_MB28_DATA2, val) +#define bfin_read_CAN1_MB28_DATA3() bfin_read16(CAN1_MB28_DATA3) +#define bfin_write_CAN1_MB28_DATA3(val) bfin_write16(CAN1_MB28_DATA3, val) +#define bfin_read_CAN1_MB28_LENGTH() bfin_read16(CAN1_MB28_LENGTH) +#define bfin_write_CAN1_MB28_LENGTH(val) bfin_write16(CAN1_MB28_LENGTH, val) +#define bfin_read_CAN1_MB28_TIMESTAMP() bfin_read16(CAN1_MB28_TIMESTAMP) +#define bfin_write_CAN1_MB28_TIMESTAMP(val) bfin_write16(CAN1_MB28_TIMESTAMP, val) +#define bfin_read_CAN1_MB28_ID0() bfin_read16(CAN1_MB28_ID0) +#define bfin_write_CAN1_MB28_ID0(val) bfin_write16(CAN1_MB28_ID0, val) +#define bfin_read_CAN1_MB28_ID1() bfin_read16(CAN1_MB28_ID1) +#define bfin_write_CAN1_MB28_ID1(val) bfin_write16(CAN1_MB28_ID1, val) +#define bfin_read_CAN1_MB29_DATA0() bfin_read16(CAN1_MB29_DATA0) +#define bfin_write_CAN1_MB29_DATA0(val) bfin_write16(CAN1_MB29_DATA0, val) +#define bfin_read_CAN1_MB29_DATA1() bfin_read16(CAN1_MB29_DATA1) +#define bfin_write_CAN1_MB29_DATA1(val) bfin_write16(CAN1_MB29_DATA1, val) +#define bfin_read_CAN1_MB29_DATA2() bfin_read16(CAN1_MB29_DATA2) +#define bfin_write_CAN1_MB29_DATA2(val) bfin_write16(CAN1_MB29_DATA2, val) +#define bfin_read_CAN1_MB29_DATA3() bfin_read16(CAN1_MB29_DATA3) +#define bfin_write_CAN1_MB29_DATA3(val) bfin_write16(CAN1_MB29_DATA3, val) +#define bfin_read_CAN1_MB29_LENGTH() bfin_read16(CAN1_MB29_LENGTH) +#define bfin_write_CAN1_MB29_LENGTH(val) bfin_write16(CAN1_MB29_LENGTH, val) +#define bfin_read_CAN1_MB29_TIMESTAMP() bfin_read16(CAN1_MB29_TIMESTAMP) +#define bfin_write_CAN1_MB29_TIMESTAMP(val) bfin_write16(CAN1_MB29_TIMESTAMP, val) +#define bfin_read_CAN1_MB29_ID0() bfin_read16(CAN1_MB29_ID0) +#define bfin_write_CAN1_MB29_ID0(val) bfin_write16(CAN1_MB29_ID0, val) +#define bfin_read_CAN1_MB29_ID1() bfin_read16(CAN1_MB29_ID1) +#define bfin_write_CAN1_MB29_ID1(val) bfin_write16(CAN1_MB29_ID1, val) +#define bfin_read_CAN1_MB30_DATA0() bfin_read16(CAN1_MB30_DATA0) +#define bfin_write_CAN1_MB30_DATA0(val) bfin_write16(CAN1_MB30_DATA0, val) +#define bfin_read_CAN1_MB30_DATA1() bfin_read16(CAN1_MB30_DATA1) +#define bfin_write_CAN1_MB30_DATA1(val) bfin_write16(CAN1_MB30_DATA1, val) +#define bfin_read_CAN1_MB30_DATA2() bfin_read16(CAN1_MB30_DATA2) +#define bfin_write_CAN1_MB30_DATA2(val) bfin_write16(CAN1_MB30_DATA2, val) +#define bfin_read_CAN1_MB30_DATA3() bfin_read16(CAN1_MB30_DATA3) +#define bfin_write_CAN1_MB30_DATA3(val) bfin_write16(CAN1_MB30_DATA3, val) +#define bfin_read_CAN1_MB30_LENGTH() bfin_read16(CAN1_MB30_LENGTH) +#define bfin_write_CAN1_MB30_LENGTH(val) bfin_write16(CAN1_MB30_LENGTH, val) +#define bfin_read_CAN1_MB30_TIMESTAMP() bfin_read16(CAN1_MB30_TIMESTAMP) +#define bfin_write_CAN1_MB30_TIMESTAMP(val) bfin_write16(CAN1_MB30_TIMESTAMP, val) +#define bfin_read_CAN1_MB30_ID0() bfin_read16(CAN1_MB30_ID0) +#define bfin_write_CAN1_MB30_ID0(val) bfin_write16(CAN1_MB30_ID0, val) +#define bfin_read_CAN1_MB30_ID1() bfin_read16(CAN1_MB30_ID1) +#define bfin_write_CAN1_MB30_ID1(val) bfin_write16(CAN1_MB30_ID1, val) +#define bfin_read_CAN1_MB31_DATA0() bfin_read16(CAN1_MB31_DATA0) +#define bfin_write_CAN1_MB31_DATA0(val) bfin_write16(CAN1_MB31_DATA0, val) +#define bfin_read_CAN1_MB31_DATA1() bfin_read16(CAN1_MB31_DATA1) +#define bfin_write_CAN1_MB31_DATA1(val) bfin_write16(CAN1_MB31_DATA1, val) +#define bfin_read_CAN1_MB31_DATA2() bfin_read16(CAN1_MB31_DATA2) +#define bfin_write_CAN1_MB31_DATA2(val) bfin_write16(CAN1_MB31_DATA2, val) +#define bfin_read_CAN1_MB31_DATA3() bfin_read16(CAN1_MB31_DATA3) +#define bfin_write_CAN1_MB31_DATA3(val) bfin_write16(CAN1_MB31_DATA3, val) +#define bfin_read_CAN1_MB31_LENGTH() bfin_read16(CAN1_MB31_LENGTH) +#define bfin_write_CAN1_MB31_LENGTH(val) bfin_write16(CAN1_MB31_LENGTH, val) +#define bfin_read_CAN1_MB31_TIMESTAMP() bfin_read16(CAN1_MB31_TIMESTAMP) +#define bfin_write_CAN1_MB31_TIMESTAMP(val) bfin_write16(CAN1_MB31_TIMESTAMP, val) +#define bfin_read_CAN1_MB31_ID0() bfin_read16(CAN1_MB31_ID0) +#define bfin_write_CAN1_MB31_ID0(val) bfin_write16(CAN1_MB31_ID0, val) +#define bfin_read_CAN1_MB31_ID1() bfin_read16(CAN1_MB31_ID1) +#define bfin_write_CAN1_MB31_ID1(val) bfin_write16(CAN1_MB31_ID1, val) + +/* HOST Port Registers */ + +#define bfin_read_HOST_CONTROL() bfin_read16(HOST_CONTROL) +#define bfin_write_HOST_CONTROL(val) bfin_write16(HOST_CONTROL, val) +#define bfin_read_HOST_STATUS() bfin_read16(HOST_STATUS) +#define bfin_write_HOST_STATUS(val) bfin_write16(HOST_STATUS, val) +#define bfin_read_HOST_TIMEOUT() bfin_read16(HOST_TIMEOUT) +#define bfin_write_HOST_TIMEOUT(val) bfin_write16(HOST_TIMEOUT, val) + +/* Pixel Combfin_read_()ositor (PIXC) Registers */ + +#define bfin_read_PIXC_CTL() bfin_read16(PIXC_CTL) +#define bfin_write_PIXC_CTL(val) bfin_write16(PIXC_CTL, val) +#define bfin_read_PIXC_PPL() bfin_read16(PIXC_PPL) +#define bfin_write_PIXC_PPL(val) bfin_write16(PIXC_PPL, val) +#define bfin_read_PIXC_LPF() bfin_read16(PIXC_LPF) +#define bfin_write_PIXC_LPF(val) bfin_write16(PIXC_LPF, val) +#define bfin_read_PIXC_AHSTART() bfin_read16(PIXC_AHSTART) +#define bfin_write_PIXC_AHSTART(val) bfin_write16(PIXC_AHSTART, val) +#define bfin_read_PIXC_AHEND() bfin_read16(PIXC_AHEND) +#define bfin_write_PIXC_AHEND(val) bfin_write16(PIXC_AHEND, val) +#define bfin_read_PIXC_AVSTART() bfin_read16(PIXC_AVSTART) +#define bfin_write_PIXC_AVSTART(val) bfin_write16(PIXC_AVSTART, val) +#define bfin_read_PIXC_AVEND() bfin_read16(PIXC_AVEND) +#define bfin_write_PIXC_AVEND(val) bfin_write16(PIXC_AVEND, val) +#define bfin_read_PIXC_ATRANSP() bfin_read16(PIXC_ATRANSP) +#define bfin_write_PIXC_ATRANSP(val) bfin_write16(PIXC_ATRANSP, val) +#define bfin_read_PIXC_BHSTART() bfin_read16(PIXC_BHSTART) +#define bfin_write_PIXC_BHSTART(val) bfin_write16(PIXC_BHSTART, val) +#define bfin_read_PIXC_BHEND() bfin_read16(PIXC_BHEND) +#define bfin_write_PIXC_BHEND(val) bfin_write16(PIXC_BHEND, val) +#define bfin_read_PIXC_BVSTART() bfin_read16(PIXC_BVSTART) +#define bfin_write_PIXC_BVSTART(val) bfin_write16(PIXC_BVSTART, val) +#define bfin_read_PIXC_BVEND() bfin_read16(PIXC_BVEND) +#define bfin_write_PIXC_BVEND(val) bfin_write16(PIXC_BVEND, val) +#define bfin_read_PIXC_BTRANSP() bfin_read16(PIXC_BTRANSP) +#define bfin_write_PIXC_BTRANSP(val) bfin_write16(PIXC_BTRANSP, val) +#define bfin_read_PIXC_INTRSTAT() bfin_read16(PIXC_INTRSTAT) +#define bfin_write_PIXC_INTRSTAT(val) bfin_write16(PIXC_INTRSTAT, val) +#define bfin_read_PIXC_RYCON() bfin_read32(PIXC_RYCON) +#define bfin_write_PIXC_RYCON(val) bfin_write32(PIXC_RYCON, val) +#define bfin_read_PIXC_GUCON() bfin_read32(PIXC_GUCON) +#define bfin_write_PIXC_GUCON(val) bfin_write32(PIXC_GUCON, val) +#define bfin_read_PIXC_BVCON() bfin_read32(PIXC_BVCON) +#define bfin_write_PIXC_BVCON(val) bfin_write32(PIXC_BVCON, val) +#define bfin_read_PIXC_CCBIAS() bfin_read32(PIXC_CCBIAS) +#define bfin_write_PIXC_CCBIAS(val) bfin_write32(PIXC_CCBIAS, val) +#define bfin_read_PIXC_TC() bfin_read32(PIXC_TC) +#define bfin_write_PIXC_TC(val) bfin_write32(PIXC_TC, val) + +/* Handshake MDMA 0 Registers */ + +#define bfin_read_HMDMA0_CONTROL() bfin_read16(HMDMA0_CONTROL) +#define bfin_write_HMDMA0_CONTROL(val) bfin_write16(HMDMA0_CONTROL, val) +#define bfin_read_HMDMA0_ECINIT() bfin_read16(HMDMA0_ECINIT) +#define bfin_write_HMDMA0_ECINIT(val) bfin_write16(HMDMA0_ECINIT, val) +#define bfin_read_HMDMA0_BCINIT() bfin_read16(HMDMA0_BCINIT) +#define bfin_write_HMDMA0_BCINIT(val) bfin_write16(HMDMA0_BCINIT, val) +#define bfin_read_HMDMA0_ECURGENT() bfin_read16(HMDMA0_ECURGENT) +#define bfin_write_HMDMA0_ECURGENT(val) bfin_write16(HMDMA0_ECURGENT, val) +#define bfin_read_HMDMA0_ECOVERFLOW() bfin_read16(HMDMA0_ECOVERFLOW) +#define bfin_write_HMDMA0_ECOVERFLOW(val) bfin_write16(HMDMA0_ECOVERFLOW, val) +#define bfin_read_HMDMA0_ECOUNT() bfin_read16(HMDMA0_ECOUNT) +#define bfin_write_HMDMA0_ECOUNT(val) bfin_write16(HMDMA0_ECOUNT, val) +#define bfin_read_HMDMA0_BCOUNT() bfin_read16(HMDMA0_BCOUNT) +#define bfin_write_HMDMA0_BCOUNT(val) bfin_write16(HMDMA0_BCOUNT, val) + +/* Handshake MDMA 1 Registers */ + +#define bfin_read_HMDMA1_CONTROL() bfin_read16(HMDMA1_CONTROL) +#define bfin_write_HMDMA1_CONTROL(val) bfin_write16(HMDMA1_CONTROL, val) +#define bfin_read_HMDMA1_ECINIT() bfin_read16(HMDMA1_ECINIT) +#define bfin_write_HMDMA1_ECINIT(val) bfin_write16(HMDMA1_ECINIT, val) +#define bfin_read_HMDMA1_BCINIT() bfin_read16(HMDMA1_BCINIT) +#define bfin_write_HMDMA1_BCINIT(val) bfin_write16(HMDMA1_BCINIT, val) +#define bfin_read_HMDMA1_ECURGENT() bfin_read16(HMDMA1_ECURGENT) +#define bfin_write_HMDMA1_ECURGENT(val) bfin_write16(HMDMA1_ECURGENT, val) +#define bfin_read_HMDMA1_ECOVERFLOW() bfin_read16(HMDMA1_ECOVERFLOW) +#define bfin_write_HMDMA1_ECOVERFLOW(val) bfin_write16(HMDMA1_ECOVERFLOW, val) +#define bfin_read_HMDMA1_ECOUNT() bfin_read16(HMDMA1_ECOUNT) +#define bfin_write_HMDMA1_ECOUNT(val) bfin_write16(HMDMA1_ECOUNT, val) +#define bfin_read_HMDMA1_BCOUNT() bfin_read16(HMDMA1_BCOUNT) +#define bfin_write_HMDMA1_BCOUNT(val) bfin_write16(HMDMA1_BCOUNT, val) + +#endif /* _CDEF_BF544_H */ diff --git a/include/asm-blackfin/mach-bf548/cdefBF548.h b/include/asm-blackfin/mach-bf548/cdefBF548.h new file mode 100644 index 00000000000000..674be0216bff17 --- /dev/null +++ b/include/asm-blackfin/mach-bf548/cdefBF548.h @@ -0,0 +1,1610 @@ +/* + * File: include/asm-blackfin/mach-bf548/cdefBF548.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _CDEF_BF548_H +#define _CDEF_BF548_H + +/* include all Core registers and bit definitions */ +#include "defBF548.h" + +/* include core sbfin_read_()ecific register pointer definitions */ +#include <asm/mach-common/cdef_LPBlackfin.h> + +/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF548 */ + +/* include cdefBF54x_base.h for the set of #defines that are common to all ADSP-BF54x bfin_read_()rocessors */ +#include "cdefBF54x_base.h" + +/* The following are the #defines needed by ADSP-BF548 that are not in the common header */ + +/* Timer Registers */ + +#define bfin_read_TIMER8_CONFIG() bfin_read16(TIMER8_CONFIG) +#define bfin_write_TIMER8_CONFIG(val) bfin_write16(TIMER8_CONFIG, val) +#define bfin_read_TIMER8_COUNTER() bfin_read32(TIMER8_COUNTER) +#define bfin_write_TIMER8_COUNTER(val) bfin_write32(TIMER8_COUNTER, val) +#define bfin_read_TIMER8_PERIOD() bfin_read32(TIMER8_PERIOD) +#define bfin_write_TIMER8_PERIOD(val) bfin_write32(TIMER8_PERIOD, val) +#define bfin_read_TIMER8_WIDTH() bfin_read32(TIMER8_WIDTH) +#define bfin_write_TIMER8_WIDTH(val) bfin_write32(TIMER8_WIDTH, val) +#define bfin_read_TIMER9_CONFIG() bfin_read16(TIMER9_CONFIG) +#define bfin_write_TIMER9_CONFIG(val) bfin_write16(TIMER9_CONFIG, val) +#define bfin_read_TIMER9_COUNTER() bfin_read32(TIMER9_COUNTER) +#define bfin_write_TIMER9_COUNTER(val) bfin_write32(TIMER9_COUNTER, val) +#define bfin_read_TIMER9_PERIOD() bfin_read32(TIMER9_PERIOD) +#define bfin_write_TIMER9_PERIOD(val) bfin_write32(TIMER9_PERIOD, val) +#define bfin_read_TIMER9_WIDTH() bfin_read32(TIMER9_WIDTH) +#define bfin_write_TIMER9_WIDTH(val) bfin_write32(TIMER9_WIDTH, val) +#define bfin_read_TIMER10_CONFIG() bfin_read16(TIMER10_CONFIG) +#define bfin_write_TIMER10_CONFIG(val) bfin_write16(TIMER10_CONFIG, val) +#define bfin_read_TIMER10_COUNTER() bfin_read32(TIMER10_COUNTER) +#define bfin_write_TIMER10_COUNTER(val) bfin_write32(TIMER10_COUNTER, val) +#define bfin_read_TIMER10_PERIOD() bfin_read32(TIMER10_PERIOD) +#define bfin_write_TIMER10_PERIOD(val) bfin_write32(TIMER10_PERIOD, val) +#define bfin_read_TIMER10_WIDTH() bfin_read32(TIMER10_WIDTH) +#define bfin_write_TIMER10_WIDTH(val) bfin_write32(TIMER10_WIDTH, val) + +/* Timer Groubfin_read_() of 3 */ + +#define bfin_read_TIMER_ENABLE1() bfin_read16(TIMER_ENABLE1) +#define bfin_write_TIMER_ENABLE1(val) bfin_write16(TIMER_ENABLE1, val) +#define bfin_read_TIMER_DISABLE1() bfin_read16(TIMER_DISABLE1) +#define bfin_write_TIMER_DISABLE1(val) bfin_write16(TIMER_DISABLE1, val) +#define bfin_read_TIMER_STATUS1() bfin_read32(TIMER_STATUS1) +#define bfin_write_TIMER_STATUS1(val) bfin_write32(TIMER_STATUS1, val) + +/* SPORT0 Registers */ + +#define bfin_read_SPORT0_TCR1() bfin_read16(SPORT0_TCR1) +#define bfin_write_SPORT0_TCR1(val) bfin_write16(SPORT0_TCR1, val) +#define bfin_read_SPORT0_TCR2() bfin_read16(SPORT0_TCR2) +#define bfin_write_SPORT0_TCR2(val) bfin_write16(SPORT0_TCR2, val) +#define bfin_read_SPORT0_TCLKDIV() bfin_read16(SPORT0_TCLKDIV) +#define bfin_write_SPORT0_TCLKDIV(val) bfin_write16(SPORT0_TCLKDIV, val) +#define bfin_read_SPORT0_TFSDIV() bfin_read16(SPORT0_TFSDIV) +#define bfin_write_SPORT0_TFSDIV(val) bfin_write16(SPORT0_TFSDIV, val) +#define bfin_read_SPORT0_TX() bfin_read32(SPORT0_TX) +#define bfin_write_SPORT0_TX(val) bfin_write32(SPORT0_TX, val) +#define bfin_read_SPORT0_RX() bfin_read32(SPORT0_RX) +#define bfin_write_SPORT0_RX(val) bfin_write32(SPORT0_RX, val) +#define bfin_read_SPORT0_RCR1() bfin_read16(SPORT0_RCR1) +#define bfin_write_SPORT0_RCR1(val) bfin_write16(SPORT0_RCR1, val) +#define bfin_read_SPORT0_RCR2() bfin_read16(SPORT0_RCR2) +#define bfin_write_SPORT0_RCR2(val) bfin_write16(SPORT0_RCR2, val) +#define bfin_read_SPORT0_RCLKDIV() bfin_read16(SPORT0_RCLKDIV) +#define bfin_write_SPORT0_RCLKDIV(val) bfin_write16(SPORT0_RCLKDIV, val) +#define bfin_read_SPORT0_RFSDIV() bfin_read16(SPORT0_RFSDIV) +#define bfin_write_SPORT0_RFSDIV(val) bfin_write16(SPORT0_RFSDIV, val) +#define bfin_read_SPORT0_STAT() bfin_read16(SPORT0_STAT) +#define bfin_write_SPORT0_STAT(val) bfin_write16(SPORT0_STAT, val) +#define bfin_read_SPORT0_CHNL() bfin_read16(SPORT0_CHNL) +#define bfin_write_SPORT0_CHNL(val) bfin_write16(SPORT0_CHNL, val) +#define bfin_read_SPORT0_MCMC1() bfin_read16(SPORT0_MCMC1) +#define bfin_write_SPORT0_MCMC1(val) bfin_write16(SPORT0_MCMC1, val) +#define bfin_read_SPORT0_MCMC2() bfin_read16(SPORT0_MCMC2) +#define bfin_write_SPORT0_MCMC2(val) bfin_write16(SPORT0_MCMC2, val) +#define bfin_read_SPORT0_MTCS0() bfin_read32(SPORT0_MTCS0) +#define bfin_write_SPORT0_MTCS0(val) bfin_write32(SPORT0_MTCS0, val) +#define bfin_read_SPORT0_MTCS1() bfin_read32(SPORT0_MTCS1) +#define bfin_write_SPORT0_MTCS1(val) bfin_write32(SPORT0_MTCS1, val) +#define bfin_read_SPORT0_MTCS2() bfin_read32(SPORT0_MTCS2) +#define bfin_write_SPORT0_MTCS2(val) bfin_write32(SPORT0_MTCS2, val) +#define bfin_read_SPORT0_MTCS3() bfin_read32(SPORT0_MTCS3) +#define bfin_write_SPORT0_MTCS3(val) bfin_write32(SPORT0_MTCS3, val) +#define bfin_read_SPORT0_MRCS0() bfin_read32(SPORT0_MRCS0) +#define bfin_write_SPORT0_MRCS0(val) bfin_write32(SPORT0_MRCS0, val) +#define bfin_read_SPORT0_MRCS1() bfin_read32(SPORT0_MRCS1) +#define bfin_write_SPORT0_MRCS1(val) bfin_write32(SPORT0_MRCS1, val) +#define bfin_read_SPORT0_MRCS2() bfin_read32(SPORT0_MRCS2) +#define bfin_write_SPORT0_MRCS2(val) bfin_write32(SPORT0_MRCS2, val) +#define bfin_read_SPORT0_MRCS3() bfin_read32(SPORT0_MRCS3) +#define bfin_write_SPORT0_MRCS3(val) bfin_write32(SPORT0_MRCS3, val) + +/* EPPI0 Registers */ + +#define bfin_read_EPPI0_STATUS() bfin_read16(EPPI0_STATUS) +#define bfin_write_EPPI0_STATUS(val) bfin_write16(EPPI0_STATUS, val) +#define bfin_read_EPPI0_HCOUNT() bfin_read16(EPPI0_HCOUNT) +#define bfin_write_EPPI0_HCOUNT(val) bfin_write16(EPPI0_HCOUNT, val) +#define bfin_read_EPPI0_HDELAY() bfin_read16(EPPI0_HDELAY) +#define bfin_write_EPPI0_HDELAY(val) bfin_write16(EPPI0_HDELAY, val) +#define bfin_read_EPPI0_VCOUNT() bfin_read16(EPPI0_VCOUNT) +#define bfin_write_EPPI0_VCOUNT(val) bfin_write16(EPPI0_VCOUNT, val) +#define bfin_read_EPPI0_VDELAY() bfin_read16(EPPI0_VDELAY) +#define bfin_write_EPPI0_VDELAY(val) bfin_write16(EPPI0_VDELAY, val) +#define bfin_read_EPPI0_FRAME() bfin_read16(EPPI0_FRAME) +#define bfin_write_EPPI0_FRAME(val) bfin_write16(EPPI0_FRAME, val) +#define bfin_read_EPPI0_LINE() bfin_read16(EPPI0_LINE) +#define bfin_write_EPPI0_LINE(val) bfin_write16(EPPI0_LINE, val) +#define bfin_read_EPPI0_CLKDIV() bfin_read16(EPPI0_CLKDIV) +#define bfin_write_EPPI0_CLKDIV(val) bfin_write16(EPPI0_CLKDIV, val) +#define bfin_read_EPPI0_CONTROL() bfin_read32(EPPI0_CONTROL) +#define bfin_write_EPPI0_CONTROL(val) bfin_write32(EPPI0_CONTROL, val) +#define bfin_read_EPPI0_FS1W_HBL() bfin_read32(EPPI0_FS1W_HBL) +#define bfin_write_EPPI0_FS1W_HBL(val) bfin_write32(EPPI0_FS1W_HBL, val) +#define bfin_read_EPPI0_FS1P_AVPL() bfin_read32(EPPI0_FS1P_AVPL) +#define bfin_write_EPPI0_FS1P_AVPL(val) bfin_write32(EPPI0_FS1P_AVPL, val) +#define bfin_read_EPPI0_FS2W_LVB() bfin_read32(EPPI0_FS2W_LVB) +#define bfin_write_EPPI0_FS2W_LVB(val) bfin_write32(EPPI0_FS2W_LVB, val) +#define bfin_read_EPPI0_FS2P_LAVF() bfin_read32(EPPI0_FS2P_LAVF) +#define bfin_write_EPPI0_FS2P_LAVF(val) bfin_write32(EPPI0_FS2P_LAVF, val) +#define bfin_read_EPPI0_CLIP() bfin_read32(EPPI0_CLIP) +#define bfin_write_EPPI0_CLIP(val) bfin_write32(EPPI0_CLIP, val) + +/* UART2 Registers */ + +#define bfin_read_UART2_DLL() bfin_read16(UART2_DLL) +#define bfin_write_UART2_DLL(val) bfin_write16(UART2_DLL, val) +#define bfin_read_UART2_DLH() bfin_read16(UART2_DLH) +#define bfin_write_UART2_DLH(val) bfin_write16(UART2_DLH, val) +#define bfin_read_UART2_GCTL() bfin_read16(UART2_GCTL) +#define bfin_write_UART2_GCTL(val) bfin_write16(UART2_GCTL, val) +#define bfin_read_UART2_LCR() bfin_read16(UART2_LCR) +#define bfin_write_UART2_LCR(val) bfin_write16(UART2_LCR, val) +#define bfin_read_UART2_MCR() bfin_read16(UART2_MCR) +#define bfin_write_UART2_MCR(val) bfin_write16(UART2_MCR, val) +#define bfin_read_UART2_LSR() bfin_read16(UART2_LSR) +#define bfin_write_UART2_LSR(val) bfin_write16(UART2_LSR, val) +#define bfin_read_UART2_MSR() bfin_read16(UART2_MSR) +#define bfin_write_UART2_MSR(val) bfin_write16(UART2_MSR, val) +#define bfin_read_UART2_SCR() bfin_read16(UART2_SCR) +#define bfin_write_UART2_SCR(val) bfin_write16(UART2_SCR, val) +#define bfin_read_UART2_IER_SET() bfin_read16(UART2_IER_SET) +#define bfin_write_UART2_IER_SET(val) bfin_write16(UART2_IER_SET, val) +#define bfin_read_UART2_IER_CLEAR() bfin_read16(UART2_IER_CLEAR) +#define bfin_write_UART2_IER_CLEAR(val) bfin_write16(UART2_IER_CLEAR, val) +#define bfin_read_UART2_RBR() bfin_read16(UART2_RBR) +#define bfin_write_UART2_RBR(val) bfin_write16(UART2_RBR, val) + +/* Two Wire Interface Registers (TWI1) */ + +#define bfin_read_TWI1_CLKDIV() bfin_read16(TWI1_CLKDIV) +#define bfin_write_TWI1_CLKDIV(val) bfin_write16(TWI1_CLKDIV, val) +#define bfin_read_TWI1_CONTROL() bfin_read16(TWI1_CONTROL) +#define bfin_write_TWI1_CONTROL(val) bfin_write16(TWI1_CONTROL, val) +#define bfin_read_TWI1_SLAVE_CTRL() bfin_read16(TWI1_SLAVE_CTRL) +#define bfin_write_TWI1_SLAVE_CTRL(val) bfin_write16(TWI1_SLAVE_CTRL, val) +#define bfin_read_TWI1_SLAVE_STAT() bfin_read16(TWI1_SLAVE_STAT) +#define bfin_write_TWI1_SLAVE_STAT(val) bfin_write16(TWI1_SLAVE_STAT, val) +#define bfin_read_TWI1_SLAVE_ADDR() bfin_read16(TWI1_SLAVE_ADDR) +#define bfin_write_TWI1_SLAVE_ADDR(val) bfin_write16(TWI1_SLAVE_ADDR, val) +#define bfin_read_TWI1_MASTER_CTRL() bfin_read16(TWI1_MASTER_CTRL) +#define bfin_write_TWI1_MASTER_CTRL(val) bfin_write16(TWI1_MASTER_CTRL, val) +#define bfin_read_TWI1_MASTER_STAT() bfin_read16(TWI1_MASTER_STAT) +#define bfin_write_TWI1_MASTER_STAT(val) bfin_write16(TWI1_MASTER_STAT, val) +#define bfin_read_TWI1_MASTER_ADDR() bfin_read16(TWI1_MASTER_ADDR) +#define bfin_write_TWI1_MASTER_ADDR(val) bfin_write16(TWI1_MASTER_ADDR, val) +#define bfin_read_TWI1_INT_STAT() bfin_read16(TWI1_INT_STAT) +#define bfin_write_TWI1_INT_STAT(val) bfin_write16(TWI1_INT_STAT, val) +#define bfin_read_TWI1_INT_MASK() bfin_read16(TWI1_INT_MASK) +#define bfin_write_TWI1_INT_MASK(val) bfin_write16(TWI1_INT_MASK, val) +#define bfin_read_TWI1_FIFO_CTRL() bfin_read16(TWI1_FIFO_CTRL) +#define bfin_write_TWI1_FIFO_CTRL(val) bfin_write16(TWI1_FIFO_CTRL, val) +#define bfin_read_TWI1_FIFO_STAT() bfin_read16(TWI1_FIFO_STAT) +#define bfin_write_TWI1_FIFO_STAT(val) bfin_write16(TWI1_FIFO_STAT, val) +#define bfin_read_TWI1_XMT_DATA8() bfin_read16(TWI1_XMT_DATA8) +#define bfin_write_TWI1_XMT_DATA8(val) bfin_write16(TWI1_XMT_DATA8, val) +#define bfin_read_TWI1_XMT_DATA16() bfin_read16(TWI1_XMT_DATA16) +#define bfin_write_TWI1_XMT_DATA16(val) bfin_write16(TWI1_XMT_DATA16, val) +#define bfin_read_TWI1_RCV_DATA8() bfin_read16(TWI1_RCV_DATA8) +#define bfin_write_TWI1_RCV_DATA8(val) bfin_write16(TWI1_RCV_DATA8, val) +#define bfin_read_TWI1_RCV_DATA16() bfin_read16(TWI1_RCV_DATA16) +#define bfin_write_TWI1_RCV_DATA16(val) bfin_write16(TWI1_RCV_DATA16, val) + +/* SPI2 Registers */ + +#define bfin_read_SPI2_CTL() bfin_read16(SPI2_CTL) +#define bfin_write_SPI2_CTL(val) bfin_write16(SPI2_CTL, val) +#define bfin_read_SPI2_FLG() bfin_read16(SPI2_FLG) +#define bfin_write_SPI2_FLG(val) bfin_write16(SPI2_FLG, val) +#define bfin_read_SPI2_STAT() bfin_read16(SPI2_STAT) +#define bfin_write_SPI2_STAT(val) bfin_write16(SPI2_STAT, val) +#define bfin_read_SPI2_TDBR() bfin_read16(SPI2_TDBR) +#define bfin_write_SPI2_TDBR(val) bfin_write16(SPI2_TDBR, val) +#define bfin_read_SPI2_RDBR() bfin_read16(SPI2_RDBR) +#define bfin_write_SPI2_RDBR(val) bfin_write16(SPI2_RDBR, val) +#define bfin_read_SPI2_BAUD() bfin_read16(SPI2_BAUD) +#define bfin_write_SPI2_BAUD(val) bfin_write16(SPI2_BAUD, val) +#define bfin_read_SPI2_SHADOW() bfin_read16(SPI2_SHADOW) +#define bfin_write_SPI2_SHADOW(val) bfin_write16(SPI2_SHADOW, val) + +/* CAN Controller 1 Config 1 Registers */ + +#define bfin_read_CAN1_MC1() bfin_read16(CAN1_MC1) +#define bfin_write_CAN1_MC1(val) bfin_write16(CAN1_MC1, val) +#define bfin_read_CAN1_MD1() bfin_read16(CAN1_MD1) +#define bfin_write_CAN1_MD1(val) bfin_write16(CAN1_MD1, val) +#define bfin_read_CAN1_TRS1() bfin_read16(CAN1_TRS1) +#define bfin_write_CAN1_TRS1(val) bfin_write16(CAN1_TRS1, val) +#define bfin_read_CAN1_TRR1() bfin_read16(CAN1_TRR1) +#define bfin_write_CAN1_TRR1(val) bfin_write16(CAN1_TRR1, val) +#define bfin_read_CAN1_TA1() bfin_read16(CAN1_TA1) +#define bfin_write_CAN1_TA1(val) bfin_write16(CAN1_TA1, val) +#define bfin_read_CAN1_AA1() bfin_read16(CAN1_AA1) +#define bfin_write_CAN1_AA1(val) bfin_write16(CAN1_AA1, val) +#define bfin_read_CAN1_RMP1() bfin_read16(CAN1_RMP1) +#define bfin_write_CAN1_RMP1(val) bfin_write16(CAN1_RMP1, val) +#define bfin_read_CAN1_RML1() bfin_read16(CAN1_RML1) +#define bfin_write_CAN1_RML1(val) bfin_write16(CAN1_RML1, val) +#define bfin_read_CAN1_MBTIF1() bfin_read16(CAN1_MBTIF1) +#define bfin_write_CAN1_MBTIF1(val) bfin_write16(CAN1_MBTIF1, val) +#define bfin_read_CAN1_MBRIF1() bfin_read16(CAN1_MBRIF1) +#define bfin_write_CAN1_MBRIF1(val) bfin_write16(CAN1_MBRIF1, val) +#define bfin_read_CAN1_MBIM1() bfin_read16(CAN1_MBIM1) +#define bfin_write_CAN1_MBIM1(val) bfin_write16(CAN1_MBIM1, val) +#define bfin_read_CAN1_RFH1() bfin_read16(CAN1_RFH1) +#define bfin_write_CAN1_RFH1(val) bfin_write16(CAN1_RFH1, val) +#define bfin_read_CAN1_OPSS1() bfin_read16(CAN1_OPSS1) +#define bfin_write_CAN1_OPSS1(val) bfin_write16(CAN1_OPSS1, val) + +/* CAN Controller 1 Config 2 Registers */ + +#define bfin_read_CAN1_MC2() bfin_read16(CAN1_MC2) +#define bfin_write_CAN1_MC2(val) bfin_write16(CAN1_MC2, val) +#define bfin_read_CAN1_MD2() bfin_read16(CAN1_MD2) +#define bfin_write_CAN1_MD2(val) bfin_write16(CAN1_MD2, val) +#define bfin_read_CAN1_TRS2() bfin_read16(CAN1_TRS2) +#define bfin_write_CAN1_TRS2(val) bfin_write16(CAN1_TRS2, val) +#define bfin_read_CAN1_TRR2() bfin_read16(CAN1_TRR2) +#define bfin_write_CAN1_TRR2(val) bfin_write16(CAN1_TRR2, val) +#define bfin_read_CAN1_TA2() bfin_read16(CAN1_TA2) +#define bfin_write_CAN1_TA2(val) bfin_write16(CAN1_TA2, val) +#define bfin_read_CAN1_AA2() bfin_read16(CAN1_AA2) +#define bfin_write_CAN1_AA2(val) bfin_write16(CAN1_AA2, val) +#define bfin_read_CAN1_RMP2() bfin_read16(CAN1_RMP2) +#define bfin_write_CAN1_RMP2(val) bfin_write16(CAN1_RMP2, val) +#define bfin_read_CAN1_RML2() bfin_read16(CAN1_RML2) +#define bfin_write_CAN1_RML2(val) bfin_write16(CAN1_RML2, val) +#define bfin_read_CAN1_MBTIF2() bfin_read16(CAN1_MBTIF2) +#define bfin_write_CAN1_MBTIF2(val) bfin_write16(CAN1_MBTIF2, val) +#define bfin_read_CAN1_MBRIF2() bfin_read16(CAN1_MBRIF2) +#define bfin_write_CAN1_MBRIF2(val) bfin_write16(CAN1_MBRIF2, val) +#define bfin_read_CAN1_MBIM2() bfin_read16(CAN1_MBIM2) +#define bfin_write_CAN1_MBIM2(val) bfin_write16(CAN1_MBIM2, val) +#define bfin_read_CAN1_RFH2() bfin_read16(CAN1_RFH2) +#define bfin_write_CAN1_RFH2(val) bfin_write16(CAN1_RFH2, val) +#define bfin_read_CAN1_OPSS2() bfin_read16(CAN1_OPSS2) +#define bfin_write_CAN1_OPSS2(val) bfin_write16(CAN1_OPSS2, val) + +/* CAN Controller 1 Clock/Interrubfin_read_()t/Counter Registers */ + +#define bfin_read_CAN1_CLOCK() bfin_read16(CAN1_CLOCK) +#define bfin_write_CAN1_CLOCK(val) bfin_write16(CAN1_CLOCK, val) +#define bfin_read_CAN1_TIMING() bfin_read16(CAN1_TIMING) +#define bfin_write_CAN1_TIMING(val) bfin_write16(CAN1_TIMING, val) +#define bfin_read_CAN1_DEBUG() bfin_read16(CAN1_DEBUG) +#define bfin_write_CAN1_DEBUG(val) bfin_write16(CAN1_DEBUG, val) +#define bfin_read_CAN1_STATUS() bfin_read16(CAN1_STATUS) +#define bfin_write_CAN1_STATUS(val) bfin_write16(CAN1_STATUS, val) +#define bfin_read_CAN1_CEC() bfin_read16(CAN1_CEC) +#define bfin_write_CAN1_CEC(val) bfin_write16(CAN1_CEC, val) +#define bfin_read_CAN1_GIS() bfin_read16(CAN1_GIS) +#define bfin_write_CAN1_GIS(val) bfin_write16(CAN1_GIS, val) +#define bfin_read_CAN1_GIM() bfin_read16(CAN1_GIM) +#define bfin_write_CAN1_GIM(val) bfin_write16(CAN1_GIM, val) +#define bfin_read_CAN1_GIF() bfin_read16(CAN1_GIF) +#define bfin_write_CAN1_GIF(val) bfin_write16(CAN1_GIF, val) +#define bfin_read_CAN1_CONTROL() bfin_read16(CAN1_CONTROL) +#define bfin_write_CAN1_CONTROL(val) bfin_write16(CAN1_CONTROL, val) +#define bfin_read_CAN1_INTR() bfin_read16(CAN1_INTR) +#define bfin_write_CAN1_INTR(val) bfin_write16(CAN1_INTR, val) +#define bfin_read_CAN1_MBTD() bfin_read16(CAN1_MBTD) +#define bfin_write_CAN1_MBTD(val) bfin_write16(CAN1_MBTD, val) +#define bfin_read_CAN1_EWR() bfin_read16(CAN1_EWR) +#define bfin_write_CAN1_EWR(val) bfin_write16(CAN1_EWR, val) +#define bfin_read_CAN1_ESR() bfin_read16(CAN1_ESR) +#define bfin_write_CAN1_ESR(val) bfin_write16(CAN1_ESR, val) +#define bfin_read_CAN1_UCCNT() bfin_read16(CAN1_UCCNT) +#define bfin_write_CAN1_UCCNT(val) bfin_write16(CAN1_UCCNT, val) +#define bfin_read_CAN1_UCRC() bfin_read16(CAN1_UCRC) +#define bfin_write_CAN1_UCRC(val) bfin_write16(CAN1_UCRC, val) +#define bfin_read_CAN1_UCCNF() bfin_read16(CAN1_UCCNF) +#define bfin_write_CAN1_UCCNF(val) bfin_write16(CAN1_UCCNF, val) + +/* CAN Controller 1 Mailbox Accebfin_read_()tance Registers */ + +#define bfin_read_CAN1_AM00L() bfin_read16(CAN1_AM00L) +#define bfin_write_CAN1_AM00L(val) bfin_write16(CAN1_AM00L, val) +#define bfin_read_CAN1_AM00H() bfin_read16(CAN1_AM00H) +#define bfin_write_CAN1_AM00H(val) bfin_write16(CAN1_AM00H, val) +#define bfin_read_CAN1_AM01L() bfin_read16(CAN1_AM01L) +#define bfin_write_CAN1_AM01L(val) bfin_write16(CAN1_AM01L, val) +#define bfin_read_CAN1_AM01H() bfin_read16(CAN1_AM01H) +#define bfin_write_CAN1_AM01H(val) bfin_write16(CAN1_AM01H, val) +#define bfin_read_CAN1_AM02L() bfin_read16(CAN1_AM02L) +#define bfin_write_CAN1_AM02L(val) bfin_write16(CAN1_AM02L, val) +#define bfin_read_CAN1_AM02H() bfin_read16(CAN1_AM02H) +#define bfin_write_CAN1_AM02H(val) bfin_write16(CAN1_AM02H, val) +#define bfin_read_CAN1_AM03L() bfin_read16(CAN1_AM03L) +#define bfin_write_CAN1_AM03L(val) bfin_write16(CAN1_AM03L, val) +#define bfin_read_CAN1_AM03H() bfin_read16(CAN1_AM03H) +#define bfin_write_CAN1_AM03H(val) bfin_write16(CAN1_AM03H, val) +#define bfin_read_CAN1_AM04L() bfin_read16(CAN1_AM04L) +#define bfin_write_CAN1_AM04L(val) bfin_write16(CAN1_AM04L, val) +#define bfin_read_CAN1_AM04H() bfin_read16(CAN1_AM04H) +#define bfin_write_CAN1_AM04H(val) bfin_write16(CAN1_AM04H, val) +#define bfin_read_CAN1_AM05L() bfin_read16(CAN1_AM05L) +#define bfin_write_CAN1_AM05L(val) bfin_write16(CAN1_AM05L, val) +#define bfin_read_CAN1_AM05H() bfin_read16(CAN1_AM05H) +#define bfin_write_CAN1_AM05H(val) bfin_write16(CAN1_AM05H, val) +#define bfin_read_CAN1_AM06L() bfin_read16(CAN1_AM06L) +#define bfin_write_CAN1_AM06L(val) bfin_write16(CAN1_AM06L, val) +#define bfin_read_CAN1_AM06H() bfin_read16(CAN1_AM06H) +#define bfin_write_CAN1_AM06H(val) bfin_write16(CAN1_AM06H, val) +#define bfin_read_CAN1_AM07L() bfin_read16(CAN1_AM07L) +#define bfin_write_CAN1_AM07L(val) bfin_write16(CAN1_AM07L, val) +#define bfin_read_CAN1_AM07H() bfin_read16(CAN1_AM07H) +#define bfin_write_CAN1_AM07H(val) bfin_write16(CAN1_AM07H, val) +#define bfin_read_CAN1_AM08L() bfin_read16(CAN1_AM08L) +#define bfin_write_CAN1_AM08L(val) bfin_write16(CAN1_AM08L, val) +#define bfin_read_CAN1_AM08H() bfin_read16(CAN1_AM08H) +#define bfin_write_CAN1_AM08H(val) bfin_write16(CAN1_AM08H, val) +#define bfin_read_CAN1_AM09L() bfin_read16(CAN1_AM09L) +#define bfin_write_CAN1_AM09L(val) bfin_write16(CAN1_AM09L, val) +#define bfin_read_CAN1_AM09H() bfin_read16(CAN1_AM09H) +#define bfin_write_CAN1_AM09H(val) bfin_write16(CAN1_AM09H, val) +#define bfin_read_CAN1_AM10L() bfin_read16(CAN1_AM10L) +#define bfin_write_CAN1_AM10L(val) bfin_write16(CAN1_AM10L, val) +#define bfin_read_CAN1_AM10H() bfin_read16(CAN1_AM10H) +#define bfin_write_CAN1_AM10H(val) bfin_write16(CAN1_AM10H, val) +#define bfin_read_CAN1_AM11L() bfin_read16(CAN1_AM11L) +#define bfin_write_CAN1_AM11L(val) bfin_write16(CAN1_AM11L, val) +#define bfin_read_CAN1_AM11H() bfin_read16(CAN1_AM11H) +#define bfin_write_CAN1_AM11H(val) bfin_write16(CAN1_AM11H, val) +#define bfin_read_CAN1_AM12L() bfin_read16(CAN1_AM12L) +#define bfin_write_CAN1_AM12L(val) bfin_write16(CAN1_AM12L, val) +#define bfin_read_CAN1_AM12H() bfin_read16(CAN1_AM12H) +#define bfin_write_CAN1_AM12H(val) bfin_write16(CAN1_AM12H, val) +#define bfin_read_CAN1_AM13L() bfin_read16(CAN1_AM13L) +#define bfin_write_CAN1_AM13L(val) bfin_write16(CAN1_AM13L, val) +#define bfin_read_CAN1_AM13H() bfin_read16(CAN1_AM13H) +#define bfin_write_CAN1_AM13H(val) bfin_write16(CAN1_AM13H, val) +#define bfin_read_CAN1_AM14L() bfin_read16(CAN1_AM14L) +#define bfin_write_CAN1_AM14L(val) bfin_write16(CAN1_AM14L, val) +#define bfin_read_CAN1_AM14H() bfin_read16(CAN1_AM14H) +#define bfin_write_CAN1_AM14H(val) bfin_write16(CAN1_AM14H, val) +#define bfin_read_CAN1_AM15L() bfin_read16(CAN1_AM15L) +#define bfin_write_CAN1_AM15L(val) bfin_write16(CAN1_AM15L, val) +#define bfin_read_CAN1_AM15H() bfin_read16(CAN1_AM15H) +#define bfin_write_CAN1_AM15H(val) bfin_write16(CAN1_AM15H, val) + +/* CAN Controller 1 Mailbox Accebfin_read_()tance Registers */ + +#define bfin_read_CAN1_AM16L() bfin_read16(CAN1_AM16L) +#define bfin_write_CAN1_AM16L(val) bfin_write16(CAN1_AM16L, val) +#define bfin_read_CAN1_AM16H() bfin_read16(CAN1_AM16H) +#define bfin_write_CAN1_AM16H(val) bfin_write16(CAN1_AM16H, val) +#define bfin_read_CAN1_AM17L() bfin_read16(CAN1_AM17L) +#define bfin_write_CAN1_AM17L(val) bfin_write16(CAN1_AM17L, val) +#define bfin_read_CAN1_AM17H() bfin_read16(CAN1_AM17H) +#define bfin_write_CAN1_AM17H(val) bfin_write16(CAN1_AM17H, val) +#define bfin_read_CAN1_AM18L() bfin_read16(CAN1_AM18L) +#define bfin_write_CAN1_AM18L(val) bfin_write16(CAN1_AM18L, val) +#define bfin_read_CAN1_AM18H() bfin_read16(CAN1_AM18H) +#define bfin_write_CAN1_AM18H(val) bfin_write16(CAN1_AM18H, val) +#define bfin_read_CAN1_AM19L() bfin_read16(CAN1_AM19L) +#define bfin_write_CAN1_AM19L(val) bfin_write16(CAN1_AM19L, val) +#define bfin_read_CAN1_AM19H() bfin_read16(CAN1_AM19H) +#define bfin_write_CAN1_AM19H(val) bfin_write16(CAN1_AM19H, val) +#define bfin_read_CAN1_AM20L() bfin_read16(CAN1_AM20L) +#define bfin_write_CAN1_AM20L(val) bfin_write16(CAN1_AM20L, val) +#define bfin_read_CAN1_AM20H() bfin_read16(CAN1_AM20H) +#define bfin_write_CAN1_AM20H(val) bfin_write16(CAN1_AM20H, val) +#define bfin_read_CAN1_AM21L() bfin_read16(CAN1_AM21L) +#define bfin_write_CAN1_AM21L(val) bfin_write16(CAN1_AM21L, val) +#define bfin_read_CAN1_AM21H() bfin_read16(CAN1_AM21H) +#define bfin_write_CAN1_AM21H(val) bfin_write16(CAN1_AM21H, val) +#define bfin_read_CAN1_AM22L() bfin_read16(CAN1_AM22L) +#define bfin_write_CAN1_AM22L(val) bfin_write16(CAN1_AM22L, val) +#define bfin_read_CAN1_AM22H() bfin_read16(CAN1_AM22H) +#define bfin_write_CAN1_AM22H(val) bfin_write16(CAN1_AM22H, val) +#define bfin_read_CAN1_AM23L() bfin_read16(CAN1_AM23L) +#define bfin_write_CAN1_AM23L(val) bfin_write16(CAN1_AM23L, val) +#define bfin_read_CAN1_AM23H() bfin_read16(CAN1_AM23H) +#define bfin_write_CAN1_AM23H(val) bfin_write16(CAN1_AM23H, val) +#define bfin_read_CAN1_AM24L() bfin_read16(CAN1_AM24L) +#define bfin_write_CAN1_AM24L(val) bfin_write16(CAN1_AM24L, val) +#define bfin_read_CAN1_AM24H() bfin_read16(CAN1_AM24H) +#define bfin_write_CAN1_AM24H(val) bfin_write16(CAN1_AM24H, val) +#define bfin_read_CAN1_AM25L() bfin_read16(CAN1_AM25L) +#define bfin_write_CAN1_AM25L(val) bfin_write16(CAN1_AM25L, val) +#define bfin_read_CAN1_AM25H() bfin_read16(CAN1_AM25H) +#define bfin_write_CAN1_AM25H(val) bfin_write16(CAN1_AM25H, val) +#define bfin_read_CAN1_AM26L() bfin_read16(CAN1_AM26L) +#define bfin_write_CAN1_AM26L(val) bfin_write16(CAN1_AM26L, val) +#define bfin_read_CAN1_AM26H() bfin_read16(CAN1_AM26H) +#define bfin_write_CAN1_AM26H(val) bfin_write16(CAN1_AM26H, val) +#define bfin_read_CAN1_AM27L() bfin_read16(CAN1_AM27L) +#define bfin_write_CAN1_AM27L(val) bfin_write16(CAN1_AM27L, val) +#define bfin_read_CAN1_AM27H() bfin_read16(CAN1_AM27H) +#define bfin_write_CAN1_AM27H(val) bfin_write16(CAN1_AM27H, val) +#define bfin_read_CAN1_AM28L() bfin_read16(CAN1_AM28L) +#define bfin_write_CAN1_AM28L(val) bfin_write16(CAN1_AM28L, val) +#define bfin_read_CAN1_AM28H() bfin_read16(CAN1_AM28H) +#define bfin_write_CAN1_AM28H(val) bfin_write16(CAN1_AM28H, val) +#define bfin_read_CAN1_AM29L() bfin_read16(CAN1_AM29L) +#define bfin_write_CAN1_AM29L(val) bfin_write16(CAN1_AM29L, val) +#define bfin_read_CAN1_AM29H() bfin_read16(CAN1_AM29H) +#define bfin_write_CAN1_AM29H(val) bfin_write16(CAN1_AM29H, val) +#define bfin_read_CAN1_AM30L() bfin_read16(CAN1_AM30L) +#define bfin_write_CAN1_AM30L(val) bfin_write16(CAN1_AM30L, val) +#define bfin_read_CAN1_AM30H() bfin_read16(CAN1_AM30H) +#define bfin_write_CAN1_AM30H(val) bfin_write16(CAN1_AM30H, val) +#define bfin_read_CAN1_AM31L() bfin_read16(CAN1_AM31L) +#define bfin_write_CAN1_AM31L(val) bfin_write16(CAN1_AM31L, val) +#define bfin_read_CAN1_AM31H() bfin_read16(CAN1_AM31H) +#define bfin_write_CAN1_AM31H(val) bfin_write16(CAN1_AM31H, val) + +/* CAN Controller 1 Mailbox Data Registers */ + +#define bfin_read_CAN1_MB00_DATA0() bfin_read16(CAN1_MB00_DATA0) +#define bfin_write_CAN1_MB00_DATA0(val) bfin_write16(CAN1_MB00_DATA0, val) +#define bfin_read_CAN1_MB00_DATA1() bfin_read16(CAN1_MB00_DATA1) +#define bfin_write_CAN1_MB00_DATA1(val) bfin_write16(CAN1_MB00_DATA1, val) +#define bfin_read_CAN1_MB00_DATA2() bfin_read16(CAN1_MB00_DATA2) +#define bfin_write_CAN1_MB00_DATA2(val) bfin_write16(CAN1_MB00_DATA2, val) +#define bfin_read_CAN1_MB00_DATA3() bfin_read16(CAN1_MB00_DATA3) +#define bfin_write_CAN1_MB00_DATA3(val) bfin_write16(CAN1_MB00_DATA3, val) +#define bfin_read_CAN1_MB00_LENGTH() bfin_read16(CAN1_MB00_LENGTH) +#define bfin_write_CAN1_MB00_LENGTH(val) bfin_write16(CAN1_MB00_LENGTH, val) +#define bfin_read_CAN1_MB00_TIMESTAMP() bfin_read16(CAN1_MB00_TIMESTAMP) +#define bfin_write_CAN1_MB00_TIMESTAMP(val) bfin_write16(CAN1_MB00_TIMESTAMP, val) +#define bfin_read_CAN1_MB00_ID0() bfin_read16(CAN1_MB00_ID0) +#define bfin_write_CAN1_MB00_ID0(val) bfin_write16(CAN1_MB00_ID0, val) +#define bfin_read_CAN1_MB00_ID1() bfin_read16(CAN1_MB00_ID1) +#define bfin_write_CAN1_MB00_ID1(val) bfin_write16(CAN1_MB00_ID1, val) +#define bfin_read_CAN1_MB01_DATA0() bfin_read16(CAN1_MB01_DATA0) +#define bfin_write_CAN1_MB01_DATA0(val) bfin_write16(CAN1_MB01_DATA0, val) +#define bfin_read_CAN1_MB01_DATA1() bfin_read16(CAN1_MB01_DATA1) +#define bfin_write_CAN1_MB01_DATA1(val) bfin_write16(CAN1_MB01_DATA1, val) +#define bfin_read_CAN1_MB01_DATA2() bfin_read16(CAN1_MB01_DATA2) +#define bfin_write_CAN1_MB01_DATA2(val) bfin_write16(CAN1_MB01_DATA2, val) +#define bfin_read_CAN1_MB01_DATA3() bfin_read16(CAN1_MB01_DATA3) +#define bfin_write_CAN1_MB01_DATA3(val) bfin_write16(CAN1_MB01_DATA3, val) +#define bfin_read_CAN1_MB01_LENGTH() bfin_read16(CAN1_MB01_LENGTH) +#define bfin_write_CAN1_MB01_LENGTH(val) bfin_write16(CAN1_MB01_LENGTH, val) +#define bfin_read_CAN1_MB01_TIMESTAMP() bfin_read16(CAN1_MB01_TIMESTAMP) +#define bfin_write_CAN1_MB01_TIMESTAMP(val) bfin_write16(CAN1_MB01_TIMESTAMP, val) +#define bfin_read_CAN1_MB01_ID0() bfin_read16(CAN1_MB01_ID0) +#define bfin_write_CAN1_MB01_ID0(val) bfin_write16(CAN1_MB01_ID0, val) +#define bfin_read_CAN1_MB01_ID1() bfin_read16(CAN1_MB01_ID1) +#define bfin_write_CAN1_MB01_ID1(val) bfin_write16(CAN1_MB01_ID1, val) +#define bfin_read_CAN1_MB02_DATA0() bfin_read16(CAN1_MB02_DATA0) +#define bfin_write_CAN1_MB02_DATA0(val) bfin_write16(CAN1_MB02_DATA0, val) +#define bfin_read_CAN1_MB02_DATA1() bfin_read16(CAN1_MB02_DATA1) +#define bfin_write_CAN1_MB02_DATA1(val) bfin_write16(CAN1_MB02_DATA1, val) +#define bfin_read_CAN1_MB02_DATA2() bfin_read16(CAN1_MB02_DATA2) +#define bfin_write_CAN1_MB02_DATA2(val) bfin_write16(CAN1_MB02_DATA2, val) +#define bfin_read_CAN1_MB02_DATA3() bfin_read16(CAN1_MB02_DATA3) +#define bfin_write_CAN1_MB02_DATA3(val) bfin_write16(CAN1_MB02_DATA3, val) +#define bfin_read_CAN1_MB02_LENGTH() bfin_read16(CAN1_MB02_LENGTH) +#define bfin_write_CAN1_MB02_LENGTH(val) bfin_write16(CAN1_MB02_LENGTH, val) +#define bfin_read_CAN1_MB02_TIMESTAMP() bfin_read16(CAN1_MB02_TIMESTAMP) +#define bfin_write_CAN1_MB02_TIMESTAMP(val) bfin_write16(CAN1_MB02_TIMESTAMP, val) +#define bfin_read_CAN1_MB02_ID0() bfin_read16(CAN1_MB02_ID0) +#define bfin_write_CAN1_MB02_ID0(val) bfin_write16(CAN1_MB02_ID0, val) +#define bfin_read_CAN1_MB02_ID1() bfin_read16(CAN1_MB02_ID1) +#define bfin_write_CAN1_MB02_ID1(val) bfin_write16(CAN1_MB02_ID1, val) +#define bfin_read_CAN1_MB03_DATA0() bfin_read16(CAN1_MB03_DATA0) +#define bfin_write_CAN1_MB03_DATA0(val) bfin_write16(CAN1_MB03_DATA0, val) +#define bfin_read_CAN1_MB03_DATA1() bfin_read16(CAN1_MB03_DATA1) +#define bfin_write_CAN1_MB03_DATA1(val) bfin_write16(CAN1_MB03_DATA1, val) +#define bfin_read_CAN1_MB03_DATA2() bfin_read16(CAN1_MB03_DATA2) +#define bfin_write_CAN1_MB03_DATA2(val) bfin_write16(CAN1_MB03_DATA2, val) +#define bfin_read_CAN1_MB03_DATA3() bfin_read16(CAN1_MB03_DATA3) +#define bfin_write_CAN1_MB03_DATA3(val) bfin_write16(CAN1_MB03_DATA3, val) +#define bfin_read_CAN1_MB03_LENGTH() bfin_read16(CAN1_MB03_LENGTH) +#define bfin_write_CAN1_MB03_LENGTH(val) bfin_write16(CAN1_MB03_LENGTH, val) +#define bfin_read_CAN1_MB03_TIMESTAMP() bfin_read16(CAN1_MB03_TIMESTAMP) +#define bfin_write_CAN1_MB03_TIMESTAMP(val) bfin_write16(CAN1_MB03_TIMESTAMP, val) +#define bfin_read_CAN1_MB03_ID0() bfin_read16(CAN1_MB03_ID0) +#define bfin_write_CAN1_MB03_ID0(val) bfin_write16(CAN1_MB03_ID0, val) +#define bfin_read_CAN1_MB03_ID1() bfin_read16(CAN1_MB03_ID1) +#define bfin_write_CAN1_MB03_ID1(val) bfin_write16(CAN1_MB03_ID1, val) +#define bfin_read_CAN1_MB04_DATA0() bfin_read16(CAN1_MB04_DATA0) +#define bfin_write_CAN1_MB04_DATA0(val) bfin_write16(CAN1_MB04_DATA0, val) +#define bfin_read_CAN1_MB04_DATA1() bfin_read16(CAN1_MB04_DATA1) +#define bfin_write_CAN1_MB04_DATA1(val) bfin_write16(CAN1_MB04_DATA1, val) +#define bfin_read_CAN1_MB04_DATA2() bfin_read16(CAN1_MB04_DATA2) +#define bfin_write_CAN1_MB04_DATA2(val) bfin_write16(CAN1_MB04_DATA2, val) +#define bfin_read_CAN1_MB04_DATA3() bfin_read16(CAN1_MB04_DATA3) +#define bfin_write_CAN1_MB04_DATA3(val) bfin_write16(CAN1_MB04_DATA3, val) +#define bfin_read_CAN1_MB04_LENGTH() bfin_read16(CAN1_MB04_LENGTH) +#define bfin_write_CAN1_MB04_LENGTH(val) bfin_write16(CAN1_MB04_LENGTH, val) +#define bfin_read_CAN1_MB04_TIMESTAMP() bfin_read16(CAN1_MB04_TIMESTAMP) +#define bfin_write_CAN1_MB04_TIMESTAMP(val) bfin_write16(CAN1_MB04_TIMESTAMP, val) +#define bfin_read_CAN1_MB04_ID0() bfin_read16(CAN1_MB04_ID0) +#define bfin_write_CAN1_MB04_ID0(val) bfin_write16(CAN1_MB04_ID0, val) +#define bfin_read_CAN1_MB04_ID1() bfin_read16(CAN1_MB04_ID1) +#define bfin_write_CAN1_MB04_ID1(val) bfin_write16(CAN1_MB04_ID1, val) +#define bfin_read_CAN1_MB05_DATA0() bfin_read16(CAN1_MB05_DATA0) +#define bfin_write_CAN1_MB05_DATA0(val) bfin_write16(CAN1_MB05_DATA0, val) +#define bfin_read_CAN1_MB05_DATA1() bfin_read16(CAN1_MB05_DATA1) +#define bfin_write_CAN1_MB05_DATA1(val) bfin_write16(CAN1_MB05_DATA1, val) +#define bfin_read_CAN1_MB05_DATA2() bfin_read16(CAN1_MB05_DATA2) +#define bfin_write_CAN1_MB05_DATA2(val) bfin_write16(CAN1_MB05_DATA2, val) +#define bfin_read_CAN1_MB05_DATA3() bfin_read16(CAN1_MB05_DATA3) +#define bfin_write_CAN1_MB05_DATA3(val) bfin_write16(CAN1_MB05_DATA3, val) +#define bfin_read_CAN1_MB05_LENGTH() bfin_read16(CAN1_MB05_LENGTH) +#define bfin_write_CAN1_MB05_LENGTH(val) bfin_write16(CAN1_MB05_LENGTH, val) +#define bfin_read_CAN1_MB05_TIMESTAMP() bfin_read16(CAN1_MB05_TIMESTAMP) +#define bfin_write_CAN1_MB05_TIMESTAMP(val) bfin_write16(CAN1_MB05_TIMESTAMP, val) +#define bfin_read_CAN1_MB05_ID0() bfin_read16(CAN1_MB05_ID0) +#define bfin_write_CAN1_MB05_ID0(val) bfin_write16(CAN1_MB05_ID0, val) +#define bfin_read_CAN1_MB05_ID1() bfin_read16(CAN1_MB05_ID1) +#define bfin_write_CAN1_MB05_ID1(val) bfin_write16(CAN1_MB05_ID1, val) +#define bfin_read_CAN1_MB06_DATA0() bfin_read16(CAN1_MB06_DATA0) +#define bfin_write_CAN1_MB06_DATA0(val) bfin_write16(CAN1_MB06_DATA0, val) +#define bfin_read_CAN1_MB06_DATA1() bfin_read16(CAN1_MB06_DATA1) +#define bfin_write_CAN1_MB06_DATA1(val) bfin_write16(CAN1_MB06_DATA1, val) +#define bfin_read_CAN1_MB06_DATA2() bfin_read16(CAN1_MB06_DATA2) +#define bfin_write_CAN1_MB06_DATA2(val) bfin_write16(CAN1_MB06_DATA2, val) +#define bfin_read_CAN1_MB06_DATA3() bfin_read16(CAN1_MB06_DATA3) +#define bfin_write_CAN1_MB06_DATA3(val) bfin_write16(CAN1_MB06_DATA3, val) +#define bfin_read_CAN1_MB06_LENGTH() bfin_read16(CAN1_MB06_LENGTH) +#define bfin_write_CAN1_MB06_LENGTH(val) bfin_write16(CAN1_MB06_LENGTH, val) +#define bfin_read_CAN1_MB06_TIMESTAMP() bfin_read16(CAN1_MB06_TIMESTAMP) +#define bfin_write_CAN1_MB06_TIMESTAMP(val) bfin_write16(CAN1_MB06_TIMESTAMP, val) +#define bfin_read_CAN1_MB06_ID0() bfin_read16(CAN1_MB06_ID0) +#define bfin_write_CAN1_MB06_ID0(val) bfin_write16(CAN1_MB06_ID0, val) +#define bfin_read_CAN1_MB06_ID1() bfin_read16(CAN1_MB06_ID1) +#define bfin_write_CAN1_MB06_ID1(val) bfin_write16(CAN1_MB06_ID1, val) +#define bfin_read_CAN1_MB07_DATA0() bfin_read16(CAN1_MB07_DATA0) +#define bfin_write_CAN1_MB07_DATA0(val) bfin_write16(CAN1_MB07_DATA0, val) +#define bfin_read_CAN1_MB07_DATA1() bfin_read16(CAN1_MB07_DATA1) +#define bfin_write_CAN1_MB07_DATA1(val) bfin_write16(CAN1_MB07_DATA1, val) +#define bfin_read_CAN1_MB07_DATA2() bfin_read16(CAN1_MB07_DATA2) +#define bfin_write_CAN1_MB07_DATA2(val) bfin_write16(CAN1_MB07_DATA2, val) +#define bfin_read_CAN1_MB07_DATA3() bfin_read16(CAN1_MB07_DATA3) +#define bfin_write_CAN1_MB07_DATA3(val) bfin_write16(CAN1_MB07_DATA3, val) +#define bfin_read_CAN1_MB07_LENGTH() bfin_read16(CAN1_MB07_LENGTH) +#define bfin_write_CAN1_MB07_LENGTH(val) bfin_write16(CAN1_MB07_LENGTH, val) +#define bfin_read_CAN1_MB07_TIMESTAMP() bfin_read16(CAN1_MB07_TIMESTAMP) +#define bfin_write_CAN1_MB07_TIMESTAMP(val) bfin_write16(CAN1_MB07_TIMESTAMP, val) +#define bfin_read_CAN1_MB07_ID0() bfin_read16(CAN1_MB07_ID0) +#define bfin_write_CAN1_MB07_ID0(val) bfin_write16(CAN1_MB07_ID0, val) +#define bfin_read_CAN1_MB07_ID1() bfin_read16(CAN1_MB07_ID1) +#define bfin_write_CAN1_MB07_ID1(val) bfin_write16(CAN1_MB07_ID1, val) +#define bfin_read_CAN1_MB08_DATA0() bfin_read16(CAN1_MB08_DATA0) +#define bfin_write_CAN1_MB08_DATA0(val) bfin_write16(CAN1_MB08_DATA0, val) +#define bfin_read_CAN1_MB08_DATA1() bfin_read16(CAN1_MB08_DATA1) +#define bfin_write_CAN1_MB08_DATA1(val) bfin_write16(CAN1_MB08_DATA1, val) +#define bfin_read_CAN1_MB08_DATA2() bfin_read16(CAN1_MB08_DATA2) +#define bfin_write_CAN1_MB08_DATA2(val) bfin_write16(CAN1_MB08_DATA2, val) +#define bfin_read_CAN1_MB08_DATA3() bfin_read16(CAN1_MB08_DATA3) +#define bfin_write_CAN1_MB08_DATA3(val) bfin_write16(CAN1_MB08_DATA3, val) +#define bfin_read_CAN1_MB08_LENGTH() bfin_read16(CAN1_MB08_LENGTH) +#define bfin_write_CAN1_MB08_LENGTH(val) bfin_write16(CAN1_MB08_LENGTH, val) +#define bfin_read_CAN1_MB08_TIMESTAMP() bfin_read16(CAN1_MB08_TIMESTAMP) +#define bfin_write_CAN1_MB08_TIMESTAMP(val) bfin_write16(CAN1_MB08_TIMESTAMP, val) +#define bfin_read_CAN1_MB08_ID0() bfin_read16(CAN1_MB08_ID0) +#define bfin_write_CAN1_MB08_ID0(val) bfin_write16(CAN1_MB08_ID0, val) +#define bfin_read_CAN1_MB08_ID1() bfin_read16(CAN1_MB08_ID1) +#define bfin_write_CAN1_MB08_ID1(val) bfin_write16(CAN1_MB08_ID1, val) +#define bfin_read_CAN1_MB09_DATA0() bfin_read16(CAN1_MB09_DATA0) +#define bfin_write_CAN1_MB09_DATA0(val) bfin_write16(CAN1_MB09_DATA0, val) +#define bfin_read_CAN1_MB09_DATA1() bfin_read16(CAN1_MB09_DATA1) +#define bfin_write_CAN1_MB09_DATA1(val) bfin_write16(CAN1_MB09_DATA1, val) +#define bfin_read_CAN1_MB09_DATA2() bfin_read16(CAN1_MB09_DATA2) +#define bfin_write_CAN1_MB09_DATA2(val) bfin_write16(CAN1_MB09_DATA2, val) +#define bfin_read_CAN1_MB09_DATA3() bfin_read16(CAN1_MB09_DATA3) +#define bfin_write_CAN1_MB09_DATA3(val) bfin_write16(CAN1_MB09_DATA3, val) +#define bfin_read_CAN1_MB09_LENGTH() bfin_read16(CAN1_MB09_LENGTH) +#define bfin_write_CAN1_MB09_LENGTH(val) bfin_write16(CAN1_MB09_LENGTH, val) +#define bfin_read_CAN1_MB09_TIMESTAMP() bfin_read16(CAN1_MB09_TIMESTAMP) +#define bfin_write_CAN1_MB09_TIMESTAMP(val) bfin_write16(CAN1_MB09_TIMESTAMP, val) +#define bfin_read_CAN1_MB09_ID0() bfin_read16(CAN1_MB09_ID0) +#define bfin_write_CAN1_MB09_ID0(val) bfin_write16(CAN1_MB09_ID0, val) +#define bfin_read_CAN1_MB09_ID1() bfin_read16(CAN1_MB09_ID1) +#define bfin_write_CAN1_MB09_ID1(val) bfin_write16(CAN1_MB09_ID1, val) +#define bfin_read_CAN1_MB10_DATA0() bfin_read16(CAN1_MB10_DATA0) +#define bfin_write_CAN1_MB10_DATA0(val) bfin_write16(CAN1_MB10_DATA0, val) +#define bfin_read_CAN1_MB10_DATA1() bfin_read16(CAN1_MB10_DATA1) +#define bfin_write_CAN1_MB10_DATA1(val) bfin_write16(CAN1_MB10_DATA1, val) +#define bfin_read_CAN1_MB10_DATA2() bfin_read16(CAN1_MB10_DATA2) +#define bfin_write_CAN1_MB10_DATA2(val) bfin_write16(CAN1_MB10_DATA2, val) +#define bfin_read_CAN1_MB10_DATA3() bfin_read16(CAN1_MB10_DATA3) +#define bfin_write_CAN1_MB10_DATA3(val) bfin_write16(CAN1_MB10_DATA3, val) +#define bfin_read_CAN1_MB10_LENGTH() bfin_read16(CAN1_MB10_LENGTH) +#define bfin_write_CAN1_MB10_LENGTH(val) bfin_write16(CAN1_MB10_LENGTH, val) +#define bfin_read_CAN1_MB10_TIMESTAMP() bfin_read16(CAN1_MB10_TIMESTAMP) +#define bfin_write_CAN1_MB10_TIMESTAMP(val) bfin_write16(CAN1_MB10_TIMESTAMP, val) +#define bfin_read_CAN1_MB10_ID0() bfin_read16(CAN1_MB10_ID0) +#define bfin_write_CAN1_MB10_ID0(val) bfin_write16(CAN1_MB10_ID0, val) +#define bfin_read_CAN1_MB10_ID1() bfin_read16(CAN1_MB10_ID1) +#define bfin_write_CAN1_MB10_ID1(val) bfin_write16(CAN1_MB10_ID1, val) +#define bfin_read_CAN1_MB11_DATA0() bfin_read16(CAN1_MB11_DATA0) +#define bfin_write_CAN1_MB11_DATA0(val) bfin_write16(CAN1_MB11_DATA0, val) +#define bfin_read_CAN1_MB11_DATA1() bfin_read16(CAN1_MB11_DATA1) +#define bfin_write_CAN1_MB11_DATA1(val) bfin_write16(CAN1_MB11_DATA1, val) +#define bfin_read_CAN1_MB11_DATA2() bfin_read16(CAN1_MB11_DATA2) +#define bfin_write_CAN1_MB11_DATA2(val) bfin_write16(CAN1_MB11_DATA2, val) +#define bfin_read_CAN1_MB11_DATA3() bfin_read16(CAN1_MB11_DATA3) +#define bfin_write_CAN1_MB11_DATA3(val) bfin_write16(CAN1_MB11_DATA3, val) +#define bfin_read_CAN1_MB11_LENGTH() bfin_read16(CAN1_MB11_LENGTH) +#define bfin_write_CAN1_MB11_LENGTH(val) bfin_write16(CAN1_MB11_LENGTH, val) +#define bfin_read_CAN1_MB11_TIMESTAMP() bfin_read16(CAN1_MB11_TIMESTAMP) +#define bfin_write_CAN1_MB11_TIMESTAMP(val) bfin_write16(CAN1_MB11_TIMESTAMP, val) +#define bfin_read_CAN1_MB11_ID0() bfin_read16(CAN1_MB11_ID0) +#define bfin_write_CAN1_MB11_ID0(val) bfin_write16(CAN1_MB11_ID0, val) +#define bfin_read_CAN1_MB11_ID1() bfin_read16(CAN1_MB11_ID1) +#define bfin_write_CAN1_MB11_ID1(val) bfin_write16(CAN1_MB11_ID1, val) +#define bfin_read_CAN1_MB12_DATA0() bfin_read16(CAN1_MB12_DATA0) +#define bfin_write_CAN1_MB12_DATA0(val) bfin_write16(CAN1_MB12_DATA0, val) +#define bfin_read_CAN1_MB12_DATA1() bfin_read16(CAN1_MB12_DATA1) +#define bfin_write_CAN1_MB12_DATA1(val) bfin_write16(CAN1_MB12_DATA1, val) +#define bfin_read_CAN1_MB12_DATA2() bfin_read16(CAN1_MB12_DATA2) +#define bfin_write_CAN1_MB12_DATA2(val) bfin_write16(CAN1_MB12_DATA2, val) +#define bfin_read_CAN1_MB12_DATA3() bfin_read16(CAN1_MB12_DATA3) +#define bfin_write_CAN1_MB12_DATA3(val) bfin_write16(CAN1_MB12_DATA3, val) +#define bfin_read_CAN1_MB12_LENGTH() bfin_read16(CAN1_MB12_LENGTH) +#define bfin_write_CAN1_MB12_LENGTH(val) bfin_write16(CAN1_MB12_LENGTH, val) +#define bfin_read_CAN1_MB12_TIMESTAMP() bfin_read16(CAN1_MB12_TIMESTAMP) +#define bfin_write_CAN1_MB12_TIMESTAMP(val) bfin_write16(CAN1_MB12_TIMESTAMP, val) +#define bfin_read_CAN1_MB12_ID0() bfin_read16(CAN1_MB12_ID0) +#define bfin_write_CAN1_MB12_ID0(val) bfin_write16(CAN1_MB12_ID0, val) +#define bfin_read_CAN1_MB12_ID1() bfin_read16(CAN1_MB12_ID1) +#define bfin_write_CAN1_MB12_ID1(val) bfin_write16(CAN1_MB12_ID1, val) +#define bfin_read_CAN1_MB13_DATA0() bfin_read16(CAN1_MB13_DATA0) +#define bfin_write_CAN1_MB13_DATA0(val) bfin_write16(CAN1_MB13_DATA0, val) +#define bfin_read_CAN1_MB13_DATA1() bfin_read16(CAN1_MB13_DATA1) +#define bfin_write_CAN1_MB13_DATA1(val) bfin_write16(CAN1_MB13_DATA1, val) +#define bfin_read_CAN1_MB13_DATA2() bfin_read16(CAN1_MB13_DATA2) +#define bfin_write_CAN1_MB13_DATA2(val) bfin_write16(CAN1_MB13_DATA2, val) +#define bfin_read_CAN1_MB13_DATA3() bfin_read16(CAN1_MB13_DATA3) +#define bfin_write_CAN1_MB13_DATA3(val) bfin_write16(CAN1_MB13_DATA3, val) +#define bfin_read_CAN1_MB13_LENGTH() bfin_read16(CAN1_MB13_LENGTH) +#define bfin_write_CAN1_MB13_LENGTH(val) bfin_write16(CAN1_MB13_LENGTH, val) +#define bfin_read_CAN1_MB13_TIMESTAMP() bfin_read16(CAN1_MB13_TIMESTAMP) +#define bfin_write_CAN1_MB13_TIMESTAMP(val) bfin_write16(CAN1_MB13_TIMESTAMP, val) +#define bfin_read_CAN1_MB13_ID0() bfin_read16(CAN1_MB13_ID0) +#define bfin_write_CAN1_MB13_ID0(val) bfin_write16(CAN1_MB13_ID0, val) +#define bfin_read_CAN1_MB13_ID1() bfin_read16(CAN1_MB13_ID1) +#define bfin_write_CAN1_MB13_ID1(val) bfin_write16(CAN1_MB13_ID1, val) +#define bfin_read_CAN1_MB14_DATA0() bfin_read16(CAN1_MB14_DATA0) +#define bfin_write_CAN1_MB14_DATA0(val) bfin_write16(CAN1_MB14_DATA0, val) +#define bfin_read_CAN1_MB14_DATA1() bfin_read16(CAN1_MB14_DATA1) +#define bfin_write_CAN1_MB14_DATA1(val) bfin_write16(CAN1_MB14_DATA1, val) +#define bfin_read_CAN1_MB14_DATA2() bfin_read16(CAN1_MB14_DATA2) +#define bfin_write_CAN1_MB14_DATA2(val) bfin_write16(CAN1_MB14_DATA2, val) +#define bfin_read_CAN1_MB14_DATA3() bfin_read16(CAN1_MB14_DATA3) +#define bfin_write_CAN1_MB14_DATA3(val) bfin_write16(CAN1_MB14_DATA3, val) +#define bfin_read_CAN1_MB14_LENGTH() bfin_read16(CAN1_MB14_LENGTH) +#define bfin_write_CAN1_MB14_LENGTH(val) bfin_write16(CAN1_MB14_LENGTH, val) +#define bfin_read_CAN1_MB14_TIMESTAMP() bfin_read16(CAN1_MB14_TIMESTAMP) +#define bfin_write_CAN1_MB14_TIMESTAMP(val) bfin_write16(CAN1_MB14_TIMESTAMP, val) +#define bfin_read_CAN1_MB14_ID0() bfin_read16(CAN1_MB14_ID0) +#define bfin_write_CAN1_MB14_ID0(val) bfin_write16(CAN1_MB14_ID0, val) +#define bfin_read_CAN1_MB14_ID1() bfin_read16(CAN1_MB14_ID1) +#define bfin_write_CAN1_MB14_ID1(val) bfin_write16(CAN1_MB14_ID1, val) +#define bfin_read_CAN1_MB15_DATA0() bfin_read16(CAN1_MB15_DATA0) +#define bfin_write_CAN1_MB15_DATA0(val) bfin_write16(CAN1_MB15_DATA0, val) +#define bfin_read_CAN1_MB15_DATA1() bfin_read16(CAN1_MB15_DATA1) +#define bfin_write_CAN1_MB15_DATA1(val) bfin_write16(CAN1_MB15_DATA1, val) +#define bfin_read_CAN1_MB15_DATA2() bfin_read16(CAN1_MB15_DATA2) +#define bfin_write_CAN1_MB15_DATA2(val) bfin_write16(CAN1_MB15_DATA2, val) +#define bfin_read_CAN1_MB15_DATA3() bfin_read16(CAN1_MB15_DATA3) +#define bfin_write_CAN1_MB15_DATA3(val) bfin_write16(CAN1_MB15_DATA3, val) +#define bfin_read_CAN1_MB15_LENGTH() bfin_read16(CAN1_MB15_LENGTH) +#define bfin_write_CAN1_MB15_LENGTH(val) bfin_write16(CAN1_MB15_LENGTH, val) +#define bfin_read_CAN1_MB15_TIMESTAMP() bfin_read16(CAN1_MB15_TIMESTAMP) +#define bfin_write_CAN1_MB15_TIMESTAMP(val) bfin_write16(CAN1_MB15_TIMESTAMP, val) +#define bfin_read_CAN1_MB15_ID0() bfin_read16(CAN1_MB15_ID0) +#define bfin_write_CAN1_MB15_ID0(val) bfin_write16(CAN1_MB15_ID0, val) +#define bfin_read_CAN1_MB15_ID1() bfin_read16(CAN1_MB15_ID1) +#define bfin_write_CAN1_MB15_ID1(val) bfin_write16(CAN1_MB15_ID1, val) + +/* CAN Controller 1 Mailbox Data Registers */ + +#define bfin_read_CAN1_MB16_DATA0() bfin_read16(CAN1_MB16_DATA0) +#define bfin_write_CAN1_MB16_DATA0(val) bfin_write16(CAN1_MB16_DATA0, val) +#define bfin_read_CAN1_MB16_DATA1() bfin_read16(CAN1_MB16_DATA1) +#define bfin_write_CAN1_MB16_DATA1(val) bfin_write16(CAN1_MB16_DATA1, val) +#define bfin_read_CAN1_MB16_DATA2() bfin_read16(CAN1_MB16_DATA2) +#define bfin_write_CAN1_MB16_DATA2(val) bfin_write16(CAN1_MB16_DATA2, val) +#define bfin_read_CAN1_MB16_DATA3() bfin_read16(CAN1_MB16_DATA3) +#define bfin_write_CAN1_MB16_DATA3(val) bfin_write16(CAN1_MB16_DATA3, val) +#define bfin_read_CAN1_MB16_LENGTH() bfin_read16(CAN1_MB16_LENGTH) +#define bfin_write_CAN1_MB16_LENGTH(val) bfin_write16(CAN1_MB16_LENGTH, val) +#define bfin_read_CAN1_MB16_TIMESTAMP() bfin_read16(CAN1_MB16_TIMESTAMP) +#define bfin_write_CAN1_MB16_TIMESTAMP(val) bfin_write16(CAN1_MB16_TIMESTAMP, val) +#define bfin_read_CAN1_MB16_ID0() bfin_read16(CAN1_MB16_ID0) +#define bfin_write_CAN1_MB16_ID0(val) bfin_write16(CAN1_MB16_ID0, val) +#define bfin_read_CAN1_MB16_ID1() bfin_read16(CAN1_MB16_ID1) +#define bfin_write_CAN1_MB16_ID1(val) bfin_write16(CAN1_MB16_ID1, val) +#define bfin_read_CAN1_MB17_DATA0() bfin_read16(CAN1_MB17_DATA0) +#define bfin_write_CAN1_MB17_DATA0(val) bfin_write16(CAN1_MB17_DATA0, val) +#define bfin_read_CAN1_MB17_DATA1() bfin_read16(CAN1_MB17_DATA1) +#define bfin_write_CAN1_MB17_DATA1(val) bfin_write16(CAN1_MB17_DATA1, val) +#define bfin_read_CAN1_MB17_DATA2() bfin_read16(CAN1_MB17_DATA2) +#define bfin_write_CAN1_MB17_DATA2(val) bfin_write16(CAN1_MB17_DATA2, val) +#define bfin_read_CAN1_MB17_DATA3() bfin_read16(CAN1_MB17_DATA3) +#define bfin_write_CAN1_MB17_DATA3(val) bfin_write16(CAN1_MB17_DATA3, val) +#define bfin_read_CAN1_MB17_LENGTH() bfin_read16(CAN1_MB17_LENGTH) +#define bfin_write_CAN1_MB17_LENGTH(val) bfin_write16(CAN1_MB17_LENGTH, val) +#define bfin_read_CAN1_MB17_TIMESTAMP() bfin_read16(CAN1_MB17_TIMESTAMP) +#define bfin_write_CAN1_MB17_TIMESTAMP(val) bfin_write16(CAN1_MB17_TIMESTAMP, val) +#define bfin_read_CAN1_MB17_ID0() bfin_read16(CAN1_MB17_ID0) +#define bfin_write_CAN1_MB17_ID0(val) bfin_write16(CAN1_MB17_ID0, val) +#define bfin_read_CAN1_MB17_ID1() bfin_read16(CAN1_MB17_ID1) +#define bfin_write_CAN1_MB17_ID1(val) bfin_write16(CAN1_MB17_ID1, val) +#define bfin_read_CAN1_MB18_DATA0() bfin_read16(CAN1_MB18_DATA0) +#define bfin_write_CAN1_MB18_DATA0(val) bfin_write16(CAN1_MB18_DATA0, val) +#define bfin_read_CAN1_MB18_DATA1() bfin_read16(CAN1_MB18_DATA1) +#define bfin_write_CAN1_MB18_DATA1(val) bfin_write16(CAN1_MB18_DATA1, val) +#define bfin_read_CAN1_MB18_DATA2() bfin_read16(CAN1_MB18_DATA2) +#define bfin_write_CAN1_MB18_DATA2(val) bfin_write16(CAN1_MB18_DATA2, val) +#define bfin_read_CAN1_MB18_DATA3() bfin_read16(CAN1_MB18_DATA3) +#define bfin_write_CAN1_MB18_DATA3(val) bfin_write16(CAN1_MB18_DATA3, val) +#define bfin_read_CAN1_MB18_LENGTH() bfin_read16(CAN1_MB18_LENGTH) +#define bfin_write_CAN1_MB18_LENGTH(val) bfin_write16(CAN1_MB18_LENGTH, val) +#define bfin_read_CAN1_MB18_TIMESTAMP() bfin_read16(CAN1_MB18_TIMESTAMP) +#define bfin_write_CAN1_MB18_TIMESTAMP(val) bfin_write16(CAN1_MB18_TIMESTAMP, val) +#define bfin_read_CAN1_MB18_ID0() bfin_read16(CAN1_MB18_ID0) +#define bfin_write_CAN1_MB18_ID0(val) bfin_write16(CAN1_MB18_ID0, val) +#define bfin_read_CAN1_MB18_ID1() bfin_read16(CAN1_MB18_ID1) +#define bfin_write_CAN1_MB18_ID1(val) bfin_write16(CAN1_MB18_ID1, val) +#define bfin_read_CAN1_MB19_DATA0() bfin_read16(CAN1_MB19_DATA0) +#define bfin_write_CAN1_MB19_DATA0(val) bfin_write16(CAN1_MB19_DATA0, val) +#define bfin_read_CAN1_MB19_DATA1() bfin_read16(CAN1_MB19_DATA1) +#define bfin_write_CAN1_MB19_DATA1(val) bfin_write16(CAN1_MB19_DATA1, val) +#define bfin_read_CAN1_MB19_DATA2() bfin_read16(CAN1_MB19_DATA2) +#define bfin_write_CAN1_MB19_DATA2(val) bfin_write16(CAN1_MB19_DATA2, val) +#define bfin_read_CAN1_MB19_DATA3() bfin_read16(CAN1_MB19_DATA3) +#define bfin_write_CAN1_MB19_DATA3(val) bfin_write16(CAN1_MB19_DATA3, val) +#define bfin_read_CAN1_MB19_LENGTH() bfin_read16(CAN1_MB19_LENGTH) +#define bfin_write_CAN1_MB19_LENGTH(val) bfin_write16(CAN1_MB19_LENGTH, val) +#define bfin_read_CAN1_MB19_TIMESTAMP() bfin_read16(CAN1_MB19_TIMESTAMP) +#define bfin_write_CAN1_MB19_TIMESTAMP(val) bfin_write16(CAN1_MB19_TIMESTAMP, val) +#define bfin_read_CAN1_MB19_ID0() bfin_read16(CAN1_MB19_ID0) +#define bfin_write_CAN1_MB19_ID0(val) bfin_write16(CAN1_MB19_ID0, val) +#define bfin_read_CAN1_MB19_ID1() bfin_read16(CAN1_MB19_ID1) +#define bfin_write_CAN1_MB19_ID1(val) bfin_write16(CAN1_MB19_ID1, val) +#define bfin_read_CAN1_MB20_DATA0() bfin_read16(CAN1_MB20_DATA0) +#define bfin_write_CAN1_MB20_DATA0(val) bfin_write16(CAN1_MB20_DATA0, val) +#define bfin_read_CAN1_MB20_DATA1() bfin_read16(CAN1_MB20_DATA1) +#define bfin_write_CAN1_MB20_DATA1(val) bfin_write16(CAN1_MB20_DATA1, val) +#define bfin_read_CAN1_MB20_DATA2() bfin_read16(CAN1_MB20_DATA2) +#define bfin_write_CAN1_MB20_DATA2(val) bfin_write16(CAN1_MB20_DATA2, val) +#define bfin_read_CAN1_MB20_DATA3() bfin_read16(CAN1_MB20_DATA3) +#define bfin_write_CAN1_MB20_DATA3(val) bfin_write16(CAN1_MB20_DATA3, val) +#define bfin_read_CAN1_MB20_LENGTH() bfin_read16(CAN1_MB20_LENGTH) +#define bfin_write_CAN1_MB20_LENGTH(val) bfin_write16(CAN1_MB20_LENGTH, val) +#define bfin_read_CAN1_MB20_TIMESTAMP() bfin_read16(CAN1_MB20_TIMESTAMP) +#define bfin_write_CAN1_MB20_TIMESTAMP(val) bfin_write16(CAN1_MB20_TIMESTAMP, val) +#define bfin_read_CAN1_MB20_ID0() bfin_read16(CAN1_MB20_ID0) +#define bfin_write_CAN1_MB20_ID0(val) bfin_write16(CAN1_MB20_ID0, val) +#define bfin_read_CAN1_MB20_ID1() bfin_read16(CAN1_MB20_ID1) +#define bfin_write_CAN1_MB20_ID1(val) bfin_write16(CAN1_MB20_ID1, val) +#define bfin_read_CAN1_MB21_DATA0() bfin_read16(CAN1_MB21_DATA0) +#define bfin_write_CAN1_MB21_DATA0(val) bfin_write16(CAN1_MB21_DATA0, val) +#define bfin_read_CAN1_MB21_DATA1() bfin_read16(CAN1_MB21_DATA1) +#define bfin_write_CAN1_MB21_DATA1(val) bfin_write16(CAN1_MB21_DATA1, val) +#define bfin_read_CAN1_MB21_DATA2() bfin_read16(CAN1_MB21_DATA2) +#define bfin_write_CAN1_MB21_DATA2(val) bfin_write16(CAN1_MB21_DATA2, val) +#define bfin_read_CAN1_MB21_DATA3() bfin_read16(CAN1_MB21_DATA3) +#define bfin_write_CAN1_MB21_DATA3(val) bfin_write16(CAN1_MB21_DATA3, val) +#define bfin_read_CAN1_MB21_LENGTH() bfin_read16(CAN1_MB21_LENGTH) +#define bfin_write_CAN1_MB21_LENGTH(val) bfin_write16(CAN1_MB21_LENGTH, val) +#define bfin_read_CAN1_MB21_TIMESTAMP() bfin_read16(CAN1_MB21_TIMESTAMP) +#define bfin_write_CAN1_MB21_TIMESTAMP(val) bfin_write16(CAN1_MB21_TIMESTAMP, val) +#define bfin_read_CAN1_MB21_ID0() bfin_read16(CAN1_MB21_ID0) +#define bfin_write_CAN1_MB21_ID0(val) bfin_write16(CAN1_MB21_ID0, val) +#define bfin_read_CAN1_MB21_ID1() bfin_read16(CAN1_MB21_ID1) +#define bfin_write_CAN1_MB21_ID1(val) bfin_write16(CAN1_MB21_ID1, val) +#define bfin_read_CAN1_MB22_DATA0() bfin_read16(CAN1_MB22_DATA0) +#define bfin_write_CAN1_MB22_DATA0(val) bfin_write16(CAN1_MB22_DATA0, val) +#define bfin_read_CAN1_MB22_DATA1() bfin_read16(CAN1_MB22_DATA1) +#define bfin_write_CAN1_MB22_DATA1(val) bfin_write16(CAN1_MB22_DATA1, val) +#define bfin_read_CAN1_MB22_DATA2() bfin_read16(CAN1_MB22_DATA2) +#define bfin_write_CAN1_MB22_DATA2(val) bfin_write16(CAN1_MB22_DATA2, val) +#define bfin_read_CAN1_MB22_DATA3() bfin_read16(CAN1_MB22_DATA3) +#define bfin_write_CAN1_MB22_DATA3(val) bfin_write16(CAN1_MB22_DATA3, val) +#define bfin_read_CAN1_MB22_LENGTH() bfin_read16(CAN1_MB22_LENGTH) +#define bfin_write_CAN1_MB22_LENGTH(val) bfin_write16(CAN1_MB22_LENGTH, val) +#define bfin_read_CAN1_MB22_TIMESTAMP() bfin_read16(CAN1_MB22_TIMESTAMP) +#define bfin_write_CAN1_MB22_TIMESTAMP(val) bfin_write16(CAN1_MB22_TIMESTAMP, val) +#define bfin_read_CAN1_MB22_ID0() bfin_read16(CAN1_MB22_ID0) +#define bfin_write_CAN1_MB22_ID0(val) bfin_write16(CAN1_MB22_ID0, val) +#define bfin_read_CAN1_MB22_ID1() bfin_read16(CAN1_MB22_ID1) +#define bfin_write_CAN1_MB22_ID1(val) bfin_write16(CAN1_MB22_ID1, val) +#define bfin_read_CAN1_MB23_DATA0() bfin_read16(CAN1_MB23_DATA0) +#define bfin_write_CAN1_MB23_DATA0(val) bfin_write16(CAN1_MB23_DATA0, val) +#define bfin_read_CAN1_MB23_DATA1() bfin_read16(CAN1_MB23_DATA1) +#define bfin_write_CAN1_MB23_DATA1(val) bfin_write16(CAN1_MB23_DATA1, val) +#define bfin_read_CAN1_MB23_DATA2() bfin_read16(CAN1_MB23_DATA2) +#define bfin_write_CAN1_MB23_DATA2(val) bfin_write16(CAN1_MB23_DATA2, val) +#define bfin_read_CAN1_MB23_DATA3() bfin_read16(CAN1_MB23_DATA3) +#define bfin_write_CAN1_MB23_DATA3(val) bfin_write16(CAN1_MB23_DATA3, val) +#define bfin_read_CAN1_MB23_LENGTH() bfin_read16(CAN1_MB23_LENGTH) +#define bfin_write_CAN1_MB23_LENGTH(val) bfin_write16(CAN1_MB23_LENGTH, val) +#define bfin_read_CAN1_MB23_TIMESTAMP() bfin_read16(CAN1_MB23_TIMESTAMP) +#define bfin_write_CAN1_MB23_TIMESTAMP(val) bfin_write16(CAN1_MB23_TIMESTAMP, val) +#define bfin_read_CAN1_MB23_ID0() bfin_read16(CAN1_MB23_ID0) +#define bfin_write_CAN1_MB23_ID0(val) bfin_write16(CAN1_MB23_ID0, val) +#define bfin_read_CAN1_MB23_ID1() bfin_read16(CAN1_MB23_ID1) +#define bfin_write_CAN1_MB23_ID1(val) bfin_write16(CAN1_MB23_ID1, val) +#define bfin_read_CAN1_MB24_DATA0() bfin_read16(CAN1_MB24_DATA0) +#define bfin_write_CAN1_MB24_DATA0(val) bfin_write16(CAN1_MB24_DATA0, val) +#define bfin_read_CAN1_MB24_DATA1() bfin_read16(CAN1_MB24_DATA1) +#define bfin_write_CAN1_MB24_DATA1(val) bfin_write16(CAN1_MB24_DATA1, val) +#define bfin_read_CAN1_MB24_DATA2() bfin_read16(CAN1_MB24_DATA2) +#define bfin_write_CAN1_MB24_DATA2(val) bfin_write16(CAN1_MB24_DATA2, val) +#define bfin_read_CAN1_MB24_DATA3() bfin_read16(CAN1_MB24_DATA3) +#define bfin_write_CAN1_MB24_DATA3(val) bfin_write16(CAN1_MB24_DATA3, val) +#define bfin_read_CAN1_MB24_LENGTH() bfin_read16(CAN1_MB24_LENGTH) +#define bfin_write_CAN1_MB24_LENGTH(val) bfin_write16(CAN1_MB24_LENGTH, val) +#define bfin_read_CAN1_MB24_TIMESTAMP() bfin_read16(CAN1_MB24_TIMESTAMP) +#define bfin_write_CAN1_MB24_TIMESTAMP(val) bfin_write16(CAN1_MB24_TIMESTAMP, val) +#define bfin_read_CAN1_MB24_ID0() bfin_read16(CAN1_MB24_ID0) +#define bfin_write_CAN1_MB24_ID0(val) bfin_write16(CAN1_MB24_ID0, val) +#define bfin_read_CAN1_MB24_ID1() bfin_read16(CAN1_MB24_ID1) +#define bfin_write_CAN1_MB24_ID1(val) bfin_write16(CAN1_MB24_ID1, val) +#define bfin_read_CAN1_MB25_DATA0() bfin_read16(CAN1_MB25_DATA0) +#define bfin_write_CAN1_MB25_DATA0(val) bfin_write16(CAN1_MB25_DATA0, val) +#define bfin_read_CAN1_MB25_DATA1() bfin_read16(CAN1_MB25_DATA1) +#define bfin_write_CAN1_MB25_DATA1(val) bfin_write16(CAN1_MB25_DATA1, val) +#define bfin_read_CAN1_MB25_DATA2() bfin_read16(CAN1_MB25_DATA2) +#define bfin_write_CAN1_MB25_DATA2(val) bfin_write16(CAN1_MB25_DATA2, val) +#define bfin_read_CAN1_MB25_DATA3() bfin_read16(CAN1_MB25_DATA3) +#define bfin_write_CAN1_MB25_DATA3(val) bfin_write16(CAN1_MB25_DATA3, val) +#define bfin_read_CAN1_MB25_LENGTH() bfin_read16(CAN1_MB25_LENGTH) +#define bfin_write_CAN1_MB25_LENGTH(val) bfin_write16(CAN1_MB25_LENGTH, val) +#define bfin_read_CAN1_MB25_TIMESTAMP() bfin_read16(CAN1_MB25_TIMESTAMP) +#define bfin_write_CAN1_MB25_TIMESTAMP(val) bfin_write16(CAN1_MB25_TIMESTAMP, val) +#define bfin_read_CAN1_MB25_ID0() bfin_read16(CAN1_MB25_ID0) +#define bfin_write_CAN1_MB25_ID0(val) bfin_write16(CAN1_MB25_ID0, val) +#define bfin_read_CAN1_MB25_ID1() bfin_read16(CAN1_MB25_ID1) +#define bfin_write_CAN1_MB25_ID1(val) bfin_write16(CAN1_MB25_ID1, val) +#define bfin_read_CAN1_MB26_DATA0() bfin_read16(CAN1_MB26_DATA0) +#define bfin_write_CAN1_MB26_DATA0(val) bfin_write16(CAN1_MB26_DATA0, val) +#define bfin_read_CAN1_MB26_DATA1() bfin_read16(CAN1_MB26_DATA1) +#define bfin_write_CAN1_MB26_DATA1(val) bfin_write16(CAN1_MB26_DATA1, val) +#define bfin_read_CAN1_MB26_DATA2() bfin_read16(CAN1_MB26_DATA2) +#define bfin_write_CAN1_MB26_DATA2(val) bfin_write16(CAN1_MB26_DATA2, val) +#define bfin_read_CAN1_MB26_DATA3() bfin_read16(CAN1_MB26_DATA3) +#define bfin_write_CAN1_MB26_DATA3(val) bfin_write16(CAN1_MB26_DATA3, val) +#define bfin_read_CAN1_MB26_LENGTH() bfin_read16(CAN1_MB26_LENGTH) +#define bfin_write_CAN1_MB26_LENGTH(val) bfin_write16(CAN1_MB26_LENGTH, val) +#define bfin_read_CAN1_MB26_TIMESTAMP() bfin_read16(CAN1_MB26_TIMESTAMP) +#define bfin_write_CAN1_MB26_TIMESTAMP(val) bfin_write16(CAN1_MB26_TIMESTAMP, val) +#define bfin_read_CAN1_MB26_ID0() bfin_read16(CAN1_MB26_ID0) +#define bfin_write_CAN1_MB26_ID0(val) bfin_write16(CAN1_MB26_ID0, val) +#define bfin_read_CAN1_MB26_ID1() bfin_read16(CAN1_MB26_ID1) +#define bfin_write_CAN1_MB26_ID1(val) bfin_write16(CAN1_MB26_ID1, val) +#define bfin_read_CAN1_MB27_DATA0() bfin_read16(CAN1_MB27_DATA0) +#define bfin_write_CAN1_MB27_DATA0(val) bfin_write16(CAN1_MB27_DATA0, val) +#define bfin_read_CAN1_MB27_DATA1() bfin_read16(CAN1_MB27_DATA1) +#define bfin_write_CAN1_MB27_DATA1(val) bfin_write16(CAN1_MB27_DATA1, val) +#define bfin_read_CAN1_MB27_DATA2() bfin_read16(CAN1_MB27_DATA2) +#define bfin_write_CAN1_MB27_DATA2(val) bfin_write16(CAN1_MB27_DATA2, val) +#define bfin_read_CAN1_MB27_DATA3() bfin_read16(CAN1_MB27_DATA3) +#define bfin_write_CAN1_MB27_DATA3(val) bfin_write16(CAN1_MB27_DATA3, val) +#define bfin_read_CAN1_MB27_LENGTH() bfin_read16(CAN1_MB27_LENGTH) +#define bfin_write_CAN1_MB27_LENGTH(val) bfin_write16(CAN1_MB27_LENGTH, val) +#define bfin_read_CAN1_MB27_TIMESTAMP() bfin_read16(CAN1_MB27_TIMESTAMP) +#define bfin_write_CAN1_MB27_TIMESTAMP(val) bfin_write16(CAN1_MB27_TIMESTAMP, val) +#define bfin_read_CAN1_MB27_ID0() bfin_read16(CAN1_MB27_ID0) +#define bfin_write_CAN1_MB27_ID0(val) bfin_write16(CAN1_MB27_ID0, val) +#define bfin_read_CAN1_MB27_ID1() bfin_read16(CAN1_MB27_ID1) +#define bfin_write_CAN1_MB27_ID1(val) bfin_write16(CAN1_MB27_ID1, val) +#define bfin_read_CAN1_MB28_DATA0() bfin_read16(CAN1_MB28_DATA0) +#define bfin_write_CAN1_MB28_DATA0(val) bfin_write16(CAN1_MB28_DATA0, val) +#define bfin_read_CAN1_MB28_DATA1() bfin_read16(CAN1_MB28_DATA1) +#define bfin_write_CAN1_MB28_DATA1(val) bfin_write16(CAN1_MB28_DATA1, val) +#define bfin_read_CAN1_MB28_DATA2() bfin_read16(CAN1_MB28_DATA2) +#define bfin_write_CAN1_MB28_DATA2(val) bfin_write16(CAN1_MB28_DATA2, val) +#define bfin_read_CAN1_MB28_DATA3() bfin_read16(CAN1_MB28_DATA3) +#define bfin_write_CAN1_MB28_DATA3(val) bfin_write16(CAN1_MB28_DATA3, val) +#define bfin_read_CAN1_MB28_LENGTH() bfin_read16(CAN1_MB28_LENGTH) +#define bfin_write_CAN1_MB28_LENGTH(val) bfin_write16(CAN1_MB28_LENGTH, val) +#define bfin_read_CAN1_MB28_TIMESTAMP() bfin_read16(CAN1_MB28_TIMESTAMP) +#define bfin_write_CAN1_MB28_TIMESTAMP(val) bfin_write16(CAN1_MB28_TIMESTAMP, val) +#define bfin_read_CAN1_MB28_ID0() bfin_read16(CAN1_MB28_ID0) +#define bfin_write_CAN1_MB28_ID0(val) bfin_write16(CAN1_MB28_ID0, val) +#define bfin_read_CAN1_MB28_ID1() bfin_read16(CAN1_MB28_ID1) +#define bfin_write_CAN1_MB28_ID1(val) bfin_write16(CAN1_MB28_ID1, val) +#define bfin_read_CAN1_MB29_DATA0() bfin_read16(CAN1_MB29_DATA0) +#define bfin_write_CAN1_MB29_DATA0(val) bfin_write16(CAN1_MB29_DATA0, val) +#define bfin_read_CAN1_MB29_DATA1() bfin_read16(CAN1_MB29_DATA1) +#define bfin_write_CAN1_MB29_DATA1(val) bfin_write16(CAN1_MB29_DATA1, val) +#define bfin_read_CAN1_MB29_DATA2() bfin_read16(CAN1_MB29_DATA2) +#define bfin_write_CAN1_MB29_DATA2(val) bfin_write16(CAN1_MB29_DATA2, val) +#define bfin_read_CAN1_MB29_DATA3() bfin_read16(CAN1_MB29_DATA3) +#define bfin_write_CAN1_MB29_DATA3(val) bfin_write16(CAN1_MB29_DATA3, val) +#define bfin_read_CAN1_MB29_LENGTH() bfin_read16(CAN1_MB29_LENGTH) +#define bfin_write_CAN1_MB29_LENGTH(val) bfin_write16(CAN1_MB29_LENGTH, val) +#define bfin_read_CAN1_MB29_TIMESTAMP() bfin_read16(CAN1_MB29_TIMESTAMP) +#define bfin_write_CAN1_MB29_TIMESTAMP(val) bfin_write16(CAN1_MB29_TIMESTAMP, val) +#define bfin_read_CAN1_MB29_ID0() bfin_read16(CAN1_MB29_ID0) +#define bfin_write_CAN1_MB29_ID0(val) bfin_write16(CAN1_MB29_ID0, val) +#define bfin_read_CAN1_MB29_ID1() bfin_read16(CAN1_MB29_ID1) +#define bfin_write_CAN1_MB29_ID1(val) bfin_write16(CAN1_MB29_ID1, val) +#define bfin_read_CAN1_MB30_DATA0() bfin_read16(CAN1_MB30_DATA0) +#define bfin_write_CAN1_MB30_DATA0(val) bfin_write16(CAN1_MB30_DATA0, val) +#define bfin_read_CAN1_MB30_DATA1() bfin_read16(CAN1_MB30_DATA1) +#define bfin_write_CAN1_MB30_DATA1(val) bfin_write16(CAN1_MB30_DATA1, val) +#define bfin_read_CAN1_MB30_DATA2() bfin_read16(CAN1_MB30_DATA2) +#define bfin_write_CAN1_MB30_DATA2(val) bfin_write16(CAN1_MB30_DATA2, val) +#define bfin_read_CAN1_MB30_DATA3() bfin_read16(CAN1_MB30_DATA3) +#define bfin_write_CAN1_MB30_DATA3(val) bfin_write16(CAN1_MB30_DATA3, val) +#define bfin_read_CAN1_MB30_LENGTH() bfin_read16(CAN1_MB30_LENGTH) +#define bfin_write_CAN1_MB30_LENGTH(val) bfin_write16(CAN1_MB30_LENGTH, val) +#define bfin_read_CAN1_MB30_TIMESTAMP() bfin_read16(CAN1_MB30_TIMESTAMP) +#define bfin_write_CAN1_MB30_TIMESTAMP(val) bfin_write16(CAN1_MB30_TIMESTAMP, val) +#define bfin_read_CAN1_MB30_ID0() bfin_read16(CAN1_MB30_ID0) +#define bfin_write_CAN1_MB30_ID0(val) bfin_write16(CAN1_MB30_ID0, val) +#define bfin_read_CAN1_MB30_ID1() bfin_read16(CAN1_MB30_ID1) +#define bfin_write_CAN1_MB30_ID1(val) bfin_write16(CAN1_MB30_ID1, val) +#define bfin_read_CAN1_MB31_DATA0() bfin_read16(CAN1_MB31_DATA0) +#define bfin_write_CAN1_MB31_DATA0(val) bfin_write16(CAN1_MB31_DATA0, val) +#define bfin_read_CAN1_MB31_DATA1() bfin_read16(CAN1_MB31_DATA1) +#define bfin_write_CAN1_MB31_DATA1(val) bfin_write16(CAN1_MB31_DATA1, val) +#define bfin_read_CAN1_MB31_DATA2() bfin_read16(CAN1_MB31_DATA2) +#define bfin_write_CAN1_MB31_DATA2(val) bfin_write16(CAN1_MB31_DATA2, val) +#define bfin_read_CAN1_MB31_DATA3() bfin_read16(CAN1_MB31_DATA3) +#define bfin_write_CAN1_MB31_DATA3(val) bfin_write16(CAN1_MB31_DATA3, val) +#define bfin_read_CAN1_MB31_LENGTH() bfin_read16(CAN1_MB31_LENGTH) +#define bfin_write_CAN1_MB31_LENGTH(val) bfin_write16(CAN1_MB31_LENGTH, val) +#define bfin_read_CAN1_MB31_TIMESTAMP() bfin_read16(CAN1_MB31_TIMESTAMP) +#define bfin_write_CAN1_MB31_TIMESTAMP(val) bfin_write16(CAN1_MB31_TIMESTAMP, val) +#define bfin_read_CAN1_MB31_ID0() bfin_read16(CAN1_MB31_ID0) +#define bfin_write_CAN1_MB31_ID0(val) bfin_write16(CAN1_MB31_ID0, val) +#define bfin_read_CAN1_MB31_ID1() bfin_read16(CAN1_MB31_ID1) +#define bfin_write_CAN1_MB31_ID1(val) bfin_write16(CAN1_MB31_ID1, val) + +/* ATAPI Registers */ + +#define bfin_read_ATAPI_CONTROL() bfin_read16(ATAPI_CONTROL) +#define bfin_write_ATAPI_CONTROL(val) bfin_write16(ATAPI_CONTROL, val) +#define bfin_read_ATAPI_STATUS() bfin_read16(ATAPI_STATUS) +#define bfin_write_ATAPI_STATUS(val) bfin_write16(ATAPI_STATUS, val) +#define bfin_read_ATAPI_DEV_ADDR() bfin_read16(ATAPI_DEV_ADDR) +#define bfin_write_ATAPI_DEV_ADDR(val) bfin_write16(ATAPI_DEV_ADDR, val) +#define bfin_read_ATAPI_DEV_TXBUF() bfin_read16(ATAPI_DEV_TXBUF) +#define bfin_write_ATAPI_DEV_TXBUF(val) bfin_write16(ATAPI_DEV_TXBUF, val) +#define bfin_read_ATAPI_DEV_RXBUF() bfin_read16(ATAPI_DEV_RXBUF) +#define bfin_write_ATAPI_DEV_RXBUF(val) bfin_write16(ATAPI_DEV_RXBUF, val) +#define bfin_read_ATAPI_INT_MASK() bfin_read16(ATAPI_INT_MASK) +#define bfin_write_ATAPI_INT_MASK(val) bfin_write16(ATAPI_INT_MASK, val) +#define bfin_read_ATAPI_INT_STATUS() bfin_read16(ATAPI_INT_STATUS) +#define bfin_write_ATAPI_INT_STATUS(val) bfin_write16(ATAPI_INT_STATUS, val) +#define bfin_read_ATAPI_XFER_LEN() bfin_read16(ATAPI_XFER_LEN) +#define bfin_write_ATAPI_XFER_LEN(val) bfin_write16(ATAPI_XFER_LEN, val) +#define bfin_read_ATAPI_LINE_STATUS() bfin_read16(ATAPI_LINE_STATUS) +#define bfin_write_ATAPI_LINE_STATUS(val) bfin_write16(ATAPI_LINE_STATUS, val) +#define bfin_read_ATAPI_SM_STATE() bfin_read16(ATAPI_SM_STATE) +#define bfin_write_ATAPI_SM_STATE(val) bfin_write16(ATAPI_SM_STATE, val) +#define bfin_read_ATAPI_TERMINATE() bfin_read16(ATAPI_TERMINATE) +#define bfin_write_ATAPI_TERMINATE(val) bfin_write16(ATAPI_TERMINATE, val) +#define bfin_read_ATAPI_PIO_TFRCNT() bfin_read16(ATAPI_PIO_TFRCNT) +#define bfin_write_ATAPI_PIO_TFRCNT(val) bfin_write16(ATAPI_PIO_TFRCNT, val) +#define bfin_read_ATAPI_DMA_TFRCNT() bfin_read16(ATAPI_DMA_TFRCNT) +#define bfin_write_ATAPI_DMA_TFRCNT(val) bfin_write16(ATAPI_DMA_TFRCNT, val) +#define bfin_read_ATAPI_UMAIN_TFRCNT() bfin_read16(ATAPI_UMAIN_TFRCNT) +#define bfin_write_ATAPI_UMAIN_TFRCNT(val) bfin_write16(ATAPI_UMAIN_TFRCNT, val) +#define bfin_read_ATAPI_UDMAOUT_TFRCNT() bfin_read16(ATAPI_UDMAOUT_TFRCNT) +#define bfin_write_ATAPI_UDMAOUT_TFRCNT(val) bfin_write16(ATAPI_UDMAOUT_TFRCNT, val) +#define bfin_read_ATAPI_REG_TIM_0() bfin_read16(ATAPI_REG_TIM_0) +#define bfin_write_ATAPI_REG_TIM_0(val) bfin_write16(ATAPI_REG_TIM_0, val) +#define bfin_read_ATAPI_PIO_TIM_0() bfin_read16(ATAPI_PIO_TIM_0) +#define bfin_write_ATAPI_PIO_TIM_0(val) bfin_write16(ATAPI_PIO_TIM_0, val) +#define bfin_read_ATAPI_PIO_TIM_1() bfin_read16(ATAPI_PIO_TIM_1) +#define bfin_write_ATAPI_PIO_TIM_1(val) bfin_write16(ATAPI_PIO_TIM_1, val) +#define bfin_read_ATAPI_MULTI_TIM_0() bfin_read16(ATAPI_MULTI_TIM_0) +#define bfin_write_ATAPI_MULTI_TIM_0(val) bfin_write16(ATAPI_MULTI_TIM_0, val) +#define bfin_read_ATAPI_MULTI_TIM_1() bfin_read16(ATAPI_MULTI_TIM_1) +#define bfin_write_ATAPI_MULTI_TIM_1(val) bfin_write16(ATAPI_MULTI_TIM_1, val) +#define bfin_read_ATAPI_MULTI_TIM_2() bfin_read16(ATAPI_MULTI_TIM_2) +#define bfin_write_ATAPI_MULTI_TIM_2(val) bfin_write16(ATAPI_MULTI_TIM_2, val) +#define bfin_read_ATAPI_ULTRA_TIM_0() bfin_read16(ATAPI_ULTRA_TIM_0) +#define bfin_write_ATAPI_ULTRA_TIM_0(val) bfin_write16(ATAPI_ULTRA_TIM_0, val) +#define bfin_read_ATAPI_ULTRA_TIM_1() bfin_read16(ATAPI_ULTRA_TIM_1) +#define bfin_write_ATAPI_ULTRA_TIM_1(val) bfin_write16(ATAPI_ULTRA_TIM_1, val) +#define bfin_read_ATAPI_ULTRA_TIM_2() bfin_read16(ATAPI_ULTRA_TIM_2) +#define bfin_write_ATAPI_ULTRA_TIM_2(val) bfin_write16(ATAPI_ULTRA_TIM_2, val) +#define bfin_read_ATAPI_ULTRA_TIM_3() bfin_read16(ATAPI_ULTRA_TIM_3) +#define bfin_write_ATAPI_ULTRA_TIM_3(val) bfin_write16(ATAPI_ULTRA_TIM_3, val) + +/* SDH Registers */ + +#define bfin_read_SDH_PWR_CTL() bfin_read16(SDH_PWR_CTL) +#define bfin_write_SDH_PWR_CTL(val) bfin_write16(SDH_PWR_CTL, val) +#define bfin_read_SDH_CLK_CTL() bfin_read16(SDH_CLK_CTL) +#define bfin_write_SDH_CLK_CTL(val) bfin_write16(SDH_CLK_CTL, val) +#define bfin_read_SDH_ARGUMENT() bfin_read32(SDH_ARGUMENT) +#define bfin_write_SDH_ARGUMENT(val) bfin_write32(SDH_ARGUMENT, val) +#define bfin_read_SDH_COMMAND() bfin_read16(SDH_COMMAND) +#define bfin_write_SDH_COMMAND(val) bfin_write16(SDH_COMMAND, val) +#define bfin_read_SDH_RESP_CMD() bfin_read16(SDH_RESP_CMD) +#define bfin_write_SDH_RESP_CMD(val) bfin_write16(SDH_RESP_CMD, val) +#define bfin_read_SDH_RESPONSE0() bfin_read32(SDH_RESPONSE0) +#define bfin_write_SDH_RESPONSE0(val) bfin_write32(SDH_RESPONSE0, val) +#define bfin_read_SDH_RESPONSE1() bfin_read32(SDH_RESPONSE1) +#define bfin_write_SDH_RESPONSE1(val) bfin_write32(SDH_RESPONSE1, val) +#define bfin_read_SDH_RESPONSE2() bfin_read32(SDH_RESPONSE2) +#define bfin_write_SDH_RESPONSE2(val) bfin_write32(SDH_RESPONSE2, val) +#define bfin_read_SDH_RESPONSE3() bfin_read32(SDH_RESPONSE3) +#define bfin_write_SDH_RESPONSE3(val) bfin_write32(SDH_RESPONSE3, val) +#define bfin_read_SDH_DATA_TIMER() bfin_read32(SDH_DATA_TIMER) +#define bfin_write_SDH_DATA_TIMER(val) bfin_write32(SDH_DATA_TIMER, val) +#define bfin_read_SDH_DATA_LGTH() bfin_read16(SDH_DATA_LGTH) +#define bfin_write_SDH_DATA_LGTH(val) bfin_write16(SDH_DATA_LGTH, val) +#define bfin_read_SDH_DATA_CTL() bfin_read16(SDH_DATA_CTL) +#define bfin_write_SDH_DATA_CTL(val) bfin_write16(SDH_DATA_CTL, val) +#define bfin_read_SDH_DATA_CNT() bfin_read16(SDH_DATA_CNT) +#define bfin_write_SDH_DATA_CNT(val) bfin_write16(SDH_DATA_CNT, val) +#define bfin_read_SDH_STATUS() bfin_read32(SDH_STATUS) +#define bfin_write_SDH_STATUS(val) bfin_write32(SDH_STATUS, val) +#define bfin_read_SDH_STATUS_CLR() bfin_read16(SDH_STATUS_CLR) +#define bfin_write_SDH_STATUS_CLR(val) bfin_write16(SDH_STATUS_CLR, val) +#define bfin_read_SDH_MASK0() bfin_read32(SDH_MASK0) +#define bfin_write_SDH_MASK0(val) bfin_write32(SDH_MASK0, val) +#define bfin_read_SDH_MASK1() bfin_read32(SDH_MASK1) +#define bfin_write_SDH_MASK1(val) bfin_write32(SDH_MASK1, val) +#define bfin_read_SDH_FIFO_CNT() bfin_read16(SDH_FIFO_CNT) +#define bfin_write_SDH_FIFO_CNT(val) bfin_write16(SDH_FIFO_CNT, val) +#define bfin_read_SDH_FIFO() bfin_read32(SDH_FIFO) +#define bfin_write_SDH_FIFO(val) bfin_write32(SDH_FIFO, val) +#define bfin_read_SDH_E_STATUS() bfin_read16(SDH_E_STATUS) +#define bfin_write_SDH_E_STATUS(val) bfin_write16(SDH_E_STATUS, val) +#define bfin_read_SDH_E_MASK() bfin_read16(SDH_E_MASK) +#define bfin_write_SDH_E_MASK(val) bfin_write16(SDH_E_MASK, val) +#define bfin_read_SDH_CFG() bfin_read16(SDH_CFG) +#define bfin_write_SDH_CFG(val) bfin_write16(SDH_CFG, val) +#define bfin_read_SDH_RD_WAIT_EN() bfin_read16(SDH_RD_WAIT_EN) +#define bfin_write_SDH_RD_WAIT_EN(val) bfin_write16(SDH_RD_WAIT_EN, val) +#define bfin_read_SDH_PID0() bfin_read16(SDH_PID0) +#define bfin_write_SDH_PID0(val) bfin_write16(SDH_PID0, val) +#define bfin_read_SDH_PID1() bfin_read16(SDH_PID1) +#define bfin_write_SDH_PID1(val) bfin_write16(SDH_PID1, val) +#define bfin_read_SDH_PID2() bfin_read16(SDH_PID2) +#define bfin_write_SDH_PID2(val) bfin_write16(SDH_PID2, val) +#define bfin_read_SDH_PID3() bfin_read16(SDH_PID3) +#define bfin_write_SDH_PID3(val) bfin_write16(SDH_PID3, val) +#define bfin_read_SDH_PID4() bfin_read16(SDH_PID4) +#define bfin_write_SDH_PID4(val) bfin_write16(SDH_PID4, val) +#define bfin_read_SDH_PID5() bfin_read16(SDH_PID5) +#define bfin_write_SDH_PID5(val) bfin_write16(SDH_PID5, val) +#define bfin_read_SDH_PID6() bfin_read16(SDH_PID6) +#define bfin_write_SDH_PID6(val) bfin_write16(SDH_PID6, val) +#define bfin_read_SDH_PID7() bfin_read16(SDH_PID7) +#define bfin_write_SDH_PID7(val) bfin_write16(SDH_PID7, val) + +/* HOST Port Registers */ + +#define bfin_read_HOST_CONTROL() bfin_read16(HOST_CONTROL) +#define bfin_write_HOST_CONTROL(val) bfin_write16(HOST_CONTROL, val) +#define bfin_read_HOST_STATUS() bfin_read16(HOST_STATUS) +#define bfin_write_HOST_STATUS(val) bfin_write16(HOST_STATUS, val) +#define bfin_read_HOST_TIMEOUT() bfin_read16(HOST_TIMEOUT) +#define bfin_write_HOST_TIMEOUT(val) bfin_write16(HOST_TIMEOUT, val) + +/* USB Control Registers */ + +#define bfin_read_USB_FADDR() bfin_read16(USB_FADDR) +#define bfin_write_USB_FADDR(val) bfin_write16(USB_FADDR, val) +#define bfin_read_USB_POWER() bfin_read16(USB_POWER) +#define bfin_write_USB_POWER(val) bfin_write16(USB_POWER, val) +#define bfin_read_USB_INTRTX() bfin_read16(USB_INTRTX) +#define bfin_write_USB_INTRTX(val) bfin_write16(USB_INTRTX, val) +#define bfin_read_USB_INTRRX() bfin_read16(USB_INTRRX) +#define bfin_write_USB_INTRRX(val) bfin_write16(USB_INTRRX, val) +#define bfin_read_USB_INTRTXE() bfin_read16(USB_INTRTXE) +#define bfin_write_USB_INTRTXE(val) bfin_write16(USB_INTRTXE, val) +#define bfin_read_USB_INTRRXE() bfin_read16(USB_INTRRXE) +#define bfin_write_USB_INTRRXE(val) bfin_write16(USB_INTRRXE, val) +#define bfin_read_USB_INTRUSB() bfin_read16(USB_INTRUSB) +#define bfin_write_USB_INTRUSB(val) bfin_write16(USB_INTRUSB, val) +#define bfin_read_USB_INTRUSBE() bfin_read16(USB_INTRUSBE) +#define bfin_write_USB_INTRUSBE(val) bfin_write16(USB_INTRUSBE, val) +#define bfin_read_USB_FRAME() bfin_read16(USB_FRAME) +#define bfin_write_USB_FRAME(val) bfin_write16(USB_FRAME, val) +#define bfin_read_USB_INDEX() bfin_read16(USB_INDEX) +#define bfin_write_USB_INDEX(val) bfin_write16(USB_INDEX, val) +#define bfin_read_USB_TESTMODE() bfin_read16(USB_TESTMODE) +#define bfin_write_USB_TESTMODE(val) bfin_write16(USB_TESTMODE, val) +#define bfin_read_USB_GLOBINTR() bfin_read16(USB_GLOBINTR) +#define bfin_write_USB_GLOBINTR(val) bfin_write16(USB_GLOBINTR, val) +#define bfin_read_USB_GLOBAL_CTL() bfin_read16(USB_GLOBAL_CTL) +#define bfin_write_USB_GLOBAL_CTL(val) bfin_write16(USB_GLOBAL_CTL, val) + +/* USB Packet Control Registers */ + +#define bfin_read_USB_TX_MAX_PACKET() bfin_read16(USB_TX_MAX_PACKET) +#define bfin_write_USB_TX_MAX_PACKET(val) bfin_write16(USB_TX_MAX_PACKET, val) +#define bfin_read_USB_CSR0() bfin_read16(USB_CSR0) +#define bfin_write_USB_CSR0(val) bfin_write16(USB_CSR0, val) +#define bfin_read_USB_TXCSR() bfin_read16(USB_TXCSR) +#define bfin_write_USB_TXCSR(val) bfin_write16(USB_TXCSR, val) +#define bfin_read_USB_RX_MAX_PACKET() bfin_read16(USB_RX_MAX_PACKET) +#define bfin_write_USB_RX_MAX_PACKET(val) bfin_write16(USB_RX_MAX_PACKET, val) +#define bfin_read_USB_RXCSR() bfin_read16(USB_RXCSR) +#define bfin_write_USB_RXCSR(val) bfin_write16(USB_RXCSR, val) +#define bfin_read_USB_COUNT0() bfin_read16(USB_COUNT0) +#define bfin_write_USB_COUNT0(val) bfin_write16(USB_COUNT0, val) +#define bfin_read_USB_RXCOUNT() bfin_read16(USB_RXCOUNT) +#define bfin_write_USB_RXCOUNT(val) bfin_write16(USB_RXCOUNT, val) +#define bfin_read_USB_TXTYPE() bfin_read16(USB_TXTYPE) +#define bfin_write_USB_TXTYPE(val) bfin_write16(USB_TXTYPE, val) +#define bfin_read_USB_NAKLIMIT0() bfin_read16(USB_NAKLIMIT0) +#define bfin_write_USB_NAKLIMIT0(val) bfin_write16(USB_NAKLIMIT0, val) +#define bfin_read_USB_TXINTERVAL() bfin_read16(USB_TXINTERVAL) +#define bfin_write_USB_TXINTERVAL(val) bfin_write16(USB_TXINTERVAL, val) +#define bfin_read_USB_RXTYPE() bfin_read16(USB_RXTYPE) +#define bfin_write_USB_RXTYPE(val) bfin_write16(USB_RXTYPE, val) +#define bfin_read_USB_RXINTERVAL() bfin_read16(USB_RXINTERVAL) +#define bfin_write_USB_RXINTERVAL(val) bfin_write16(USB_RXINTERVAL, val) +#define bfin_read_USB_TXCOUNT() bfin_read16(USB_TXCOUNT) +#define bfin_write_USB_TXCOUNT(val) bfin_write16(USB_TXCOUNT, val) + +/* USB Endbfin_read_()oint FIFO Registers */ + +#define bfin_read_USB_EP0_FIFO() bfin_read16(USB_EP0_FIFO) +#define bfin_write_USB_EP0_FIFO(val) bfin_write16(USB_EP0_FIFO, val) +#define bfin_read_USB_EP1_FIFO() bfin_read16(USB_EP1_FIFO) +#define bfin_write_USB_EP1_FIFO(val) bfin_write16(USB_EP1_FIFO, val) +#define bfin_read_USB_EP2_FIFO() bfin_read16(USB_EP2_FIFO) +#define bfin_write_USB_EP2_FIFO(val) bfin_write16(USB_EP2_FIFO, val) +#define bfin_read_USB_EP3_FIFO() bfin_read16(USB_EP3_FIFO) +#define bfin_write_USB_EP3_FIFO(val) bfin_write16(USB_EP3_FIFO, val) +#define bfin_read_USB_EP4_FIFO() bfin_read16(USB_EP4_FIFO) +#define bfin_write_USB_EP4_FIFO(val) bfin_write16(USB_EP4_FIFO, val) +#define bfin_read_USB_EP5_FIFO() bfin_read16(USB_EP5_FIFO) +#define bfin_write_USB_EP5_FIFO(val) bfin_write16(USB_EP5_FIFO, val) +#define bfin_read_USB_EP6_FIFO() bfin_read16(USB_EP6_FIFO) +#define bfin_write_USB_EP6_FIFO(val) bfin_write16(USB_EP6_FIFO, val) +#define bfin_read_USB_EP7_FIFO() bfin_read16(USB_EP7_FIFO) +#define bfin_write_USB_EP7_FIFO(val) bfin_write16(USB_EP7_FIFO, val) + +/* USB OTG Control Registers */ + +#define bfin_read_USB_OTG_DEV_CTL() bfin_read16(USB_OTG_DEV_CTL) +#define bfin_write_USB_OTG_DEV_CTL(val) bfin_write16(USB_OTG_DEV_CTL, val) +#define bfin_read_USB_OTG_VBUS_IRQ() bfin_read16(USB_OTG_VBUS_IRQ) +#define bfin_write_USB_OTG_VBUS_IRQ(val) bfin_write16(USB_OTG_VBUS_IRQ, val) +#define bfin_read_USB_OTG_VBUS_MASK() bfin_read16(USB_OTG_VBUS_MASK) +#define bfin_write_USB_OTG_VBUS_MASK(val) bfin_write16(USB_OTG_VBUS_MASK, val) + +/* USB Phy Control Registers */ + +#define bfin_read_USB_LINKINFO() bfin_read16(USB_LINKINFO) +#define bfin_write_USB_LINKINFO(val) bfin_write16(USB_LINKINFO, val) +#define bfin_read_USB_VPLEN() bfin_read16(USB_VPLEN) +#define bfin_write_USB_VPLEN(val) bfin_write16(USB_VPLEN, val) +#define bfin_read_USB_HS_EOF1() bfin_read16(USB_HS_EOF1) +#define bfin_write_USB_HS_EOF1(val) bfin_write16(USB_HS_EOF1, val) +#define bfin_read_USB_FS_EOF1() bfin_read16(USB_FS_EOF1) +#define bfin_write_USB_FS_EOF1(val) bfin_write16(USB_FS_EOF1, val) +#define bfin_read_USB_LS_EOF1() bfin_read16(USB_LS_EOF1) +#define bfin_write_USB_LS_EOF1(val) bfin_write16(USB_LS_EOF1, val) + +/* (APHY_CNTRL is for ADI usage only) */ + +#define bfin_read_USB_APHY_CNTRL() bfin_read16(USB_APHY_CNTRL) +#define bfin_write_USB_APHY_CNTRL(val) bfin_write16(USB_APHY_CNTRL, val) + +/* (APHY_CALIB is for ADI usage only) */ + +#define bfin_read_USB_APHY_CALIB() bfin_read16(USB_APHY_CALIB) +#define bfin_write_USB_APHY_CALIB(val) bfin_write16(USB_APHY_CALIB, val) +#define bfin_read_USB_APHY_CNTRL2() bfin_read16(USB_APHY_CNTRL2) +#define bfin_write_USB_APHY_CNTRL2(val) bfin_write16(USB_APHY_CNTRL2, val) + +/* (PHY_TEST is for ADI usage only) */ + +#define bfin_read_USB_PHY_TEST() bfin_read16(USB_PHY_TEST) +#define bfin_write_USB_PHY_TEST(val) bfin_write16(USB_PHY_TEST, val) +#define bfin_read_USB_PLLOSC_CTRL() bfin_read16(USB_PLLOSC_CTRL) +#define bfin_write_USB_PLLOSC_CTRL(val) bfin_write16(USB_PLLOSC_CTRL, val) +#define bfin_read_USB_SRP_CLKDIV() bfin_read16(USB_SRP_CLKDIV) +#define bfin_write_USB_SRP_CLKDIV(val) bfin_write16(USB_SRP_CLKDIV, val) + +/* USB Endbfin_read_()oint 0 Control Registers */ + +#define bfin_read_USB_EP_NI0_TXMAXP() bfin_read16(USB_EP_NI0_TXMAXP) +#define bfin_write_USB_EP_NI0_TXMAXP(val) bfin_write16(USB_EP_NI0_TXMAXP, val) +#define bfin_read_USB_EP_NI0_TXCSR() bfin_read16(USB_EP_NI0_TXCSR) +#define bfin_write_USB_EP_NI0_TXCSR(val) bfin_write16(USB_EP_NI0_TXCSR, val) +#define bfin_read_USB_EP_NI0_RXMAXP() bfin_read16(USB_EP_NI0_RXMAXP) +#define bfin_write_USB_EP_NI0_RXMAXP(val) bfin_write16(USB_EP_NI0_RXMAXP, val) +#define bfin_read_USB_EP_NI0_RXCSR() bfin_read16(USB_EP_NI0_RXCSR) +#define bfin_write_USB_EP_NI0_RXCSR(val) bfin_write16(USB_EP_NI0_RXCSR, val) +#define bfin_read_USB_EP_NI0_RXCOUNT() bfin_read16(USB_EP_NI0_RXCOUNT) +#define bfin_write_USB_EP_NI0_RXCOUNT(val) bfin_write16(USB_EP_NI0_RXCOUNT, val) +#define bfin_read_USB_EP_NI0_TXTYPE() bfin_read16(USB_EP_NI0_TXTYPE) +#define bfin_write_USB_EP_NI0_TXTYPE(val) bfin_write16(USB_EP_NI0_TXTYPE, val) +#define bfin_read_USB_EP_NI0_TXINTERVAL() bfin_read16(USB_EP_NI0_TXINTERVAL) +#define bfin_write_USB_EP_NI0_TXINTERVAL(val) bfin_write16(USB_EP_NI0_TXINTERVAL, val) +#define bfin_read_USB_EP_NI0_RXTYPE() bfin_read16(USB_EP_NI0_RXTYPE) +#define bfin_write_USB_EP_NI0_RXTYPE(val) bfin_write16(USB_EP_NI0_RXTYPE, val) +#define bfin_read_USB_EP_NI0_RXINTERVAL() bfin_read16(USB_EP_NI0_RXINTERVAL) +#define bfin_write_USB_EP_NI0_RXINTERVAL(val) bfin_write16(USB_EP_NI0_RXINTERVAL, val) + +/* USB Endbfin_read_()oint 1 Control Registers */ + +#define bfin_read_USB_EP_NI0_TXCOUNT() bfin_read16(USB_EP_NI0_TXCOUNT) +#define bfin_write_USB_EP_NI0_TXCOUNT(val) bfin_write16(USB_EP_NI0_TXCOUNT, val) +#define bfin_read_USB_EP_NI1_TXMAXP() bfin_read16(USB_EP_NI1_TXMAXP) +#define bfin_write_USB_EP_NI1_TXMAXP(val) bfin_write16(USB_EP_NI1_TXMAXP, val) +#define bfin_read_USB_EP_NI1_TXCSR() bfin_read16(USB_EP_NI1_TXCSR) +#define bfin_write_USB_EP_NI1_TXCSR(val) bfin_write16(USB_EP_NI1_TXCSR, val) +#define bfin_read_USB_EP_NI1_RXMAXP() bfin_read16(USB_EP_NI1_RXMAXP) +#define bfin_write_USB_EP_NI1_RXMAXP(val) bfin_write16(USB_EP_NI1_RXMAXP, val) +#define bfin_read_USB_EP_NI1_RXCSR() bfin_read16(USB_EP_NI1_RXCSR) +#define bfin_write_USB_EP_NI1_RXCSR(val) bfin_write16(USB_EP_NI1_RXCSR, val) +#define bfin_read_USB_EP_NI1_RXCOUNT() bfin_read16(USB_EP_NI1_RXCOUNT) +#define bfin_write_USB_EP_NI1_RXCOUNT(val) bfin_write16(USB_EP_NI1_RXCOUNT, val) +#define bfin_read_USB_EP_NI1_TXTYPE() bfin_read16(USB_EP_NI1_TXTYPE) +#define bfin_write_USB_EP_NI1_TXTYPE(val) bfin_write16(USB_EP_NI1_TXTYPE, val) +#define bfin_read_USB_EP_NI1_TXINTERVAL() bfin_read16(USB_EP_NI1_TXINTERVAL) +#define bfin_write_USB_EP_NI1_TXINTERVAL(val) bfin_write16(USB_EP_NI1_TXINTERVAL, val) +#define bfin_read_USB_EP_NI1_RXTYPE() bfin_read16(USB_EP_NI1_RXTYPE) +#define bfin_write_USB_EP_NI1_RXTYPE(val) bfin_write16(USB_EP_NI1_RXTYPE, val) +#define bfin_read_USB_EP_NI1_RXINTERVAL() bfin_read16(USB_EP_NI1_RXINTERVAL) +#define bfin_write_USB_EP_NI1_RXINTERVAL(val) bfin_write16(USB_EP_NI1_RXINTERVAL, val) + +/* USB Endbfin_read_()oint 2 Control Registers */ + +#define bfin_read_USB_EP_NI1_TXCOUNT() bfin_read16(USB_EP_NI1_TXCOUNT) +#define bfin_write_USB_EP_NI1_TXCOUNT(val) bfin_write16(USB_EP_NI1_TXCOUNT, val) +#define bfin_read_USB_EP_NI2_TXMAXP() bfin_read16(USB_EP_NI2_TXMAXP) +#define bfin_write_USB_EP_NI2_TXMAXP(val) bfin_write16(USB_EP_NI2_TXMAXP, val) +#define bfin_read_USB_EP_NI2_TXCSR() bfin_read16(USB_EP_NI2_TXCSR) +#define bfin_write_USB_EP_NI2_TXCSR(val) bfin_write16(USB_EP_NI2_TXCSR, val) +#define bfin_read_USB_EP_NI2_RXMAXP() bfin_read16(USB_EP_NI2_RXMAXP) +#define bfin_write_USB_EP_NI2_RXMAXP(val) bfin_write16(USB_EP_NI2_RXMAXP, val) +#define bfin_read_USB_EP_NI2_RXCSR() bfin_read16(USB_EP_NI2_RXCSR) +#define bfin_write_USB_EP_NI2_RXCSR(val) bfin_write16(USB_EP_NI2_RXCSR, val) +#define bfin_read_USB_EP_NI2_RXCOUNT() bfin_read16(USB_EP_NI2_RXCOUNT) +#define bfin_write_USB_EP_NI2_RXCOUNT(val) bfin_write16(USB_EP_NI2_RXCOUNT, val) +#define bfin_read_USB_EP_NI2_TXTYPE() bfin_read16(USB_EP_NI2_TXTYPE) +#define bfin_write_USB_EP_NI2_TXTYPE(val) bfin_write16(USB_EP_NI2_TXTYPE, val) +#define bfin_read_USB_EP_NI2_TXINTERVAL() bfin_read16(USB_EP_NI2_TXINTERVAL) +#define bfin_write_USB_EP_NI2_TXINTERVAL(val) bfin_write16(USB_EP_NI2_TXINTERVAL, val) +#define bfin_read_USB_EP_NI2_RXTYPE() bfin_read16(USB_EP_NI2_RXTYPE) +#define bfin_write_USB_EP_NI2_RXTYPE(val) bfin_write16(USB_EP_NI2_RXTYPE, val) +#define bfin_read_USB_EP_NI2_RXINTERVAL() bfin_read16(USB_EP_NI2_RXINTERVAL) +#define bfin_write_USB_EP_NI2_RXINTERVAL(val) bfin_write16(USB_EP_NI2_RXINTERVAL, val) + +/* USB Endbfin_read_()oint 3 Control Registers */ + +#define bfin_read_USB_EP_NI2_TXCOUNT() bfin_read16(USB_EP_NI2_TXCOUNT) +#define bfin_write_USB_EP_NI2_TXCOUNT(val) bfin_write16(USB_EP_NI2_TXCOUNT, val) +#define bfin_read_USB_EP_NI3_TXMAXP() bfin_read16(USB_EP_NI3_TXMAXP) +#define bfin_write_USB_EP_NI3_TXMAXP(val) bfin_write16(USB_EP_NI3_TXMAXP, val) +#define bfin_read_USB_EP_NI3_TXCSR() bfin_read16(USB_EP_NI3_TXCSR) +#define bfin_write_USB_EP_NI3_TXCSR(val) bfin_write16(USB_EP_NI3_TXCSR, val) +#define bfin_read_USB_EP_NI3_RXMAXP() bfin_read16(USB_EP_NI3_RXMAXP) +#define bfin_write_USB_EP_NI3_RXMAXP(val) bfin_write16(USB_EP_NI3_RXMAXP, val) +#define bfin_read_USB_EP_NI3_RXCSR() bfin_read16(USB_EP_NI3_RXCSR) +#define bfin_write_USB_EP_NI3_RXCSR(val) bfin_write16(USB_EP_NI3_RXCSR, val) +#define bfin_read_USB_EP_NI3_RXCOUNT() bfin_read16(USB_EP_NI3_RXCOUNT) +#define bfin_write_USB_EP_NI3_RXCOUNT(val) bfin_write16(USB_EP_NI3_RXCOUNT, val) +#define bfin_read_USB_EP_NI3_TXTYPE() bfin_read16(USB_EP_NI3_TXTYPE) +#define bfin_write_USB_EP_NI3_TXTYPE(val) bfin_write16(USB_EP_NI3_TXTYPE, val) +#define bfin_read_USB_EP_NI3_TXINTERVAL() bfin_read16(USB_EP_NI3_TXINTERVAL) +#define bfin_write_USB_EP_NI3_TXINTERVAL(val) bfin_write16(USB_EP_NI3_TXINTERVAL, val) +#define bfin_read_USB_EP_NI3_RXTYPE() bfin_read16(USB_EP_NI3_RXTYPE) +#define bfin_write_USB_EP_NI3_RXTYPE(val) bfin_write16(USB_EP_NI3_RXTYPE, val) +#define bfin_read_USB_EP_NI3_RXINTERVAL() bfin_read16(USB_EP_NI3_RXINTERVAL) +#define bfin_write_USB_EP_NI3_RXINTERVAL(val) bfin_write16(USB_EP_NI3_RXINTERVAL, val) + +/* USB Endbfin_read_()oint 4 Control Registers */ + +#define bfin_read_USB_EP_NI3_TXCOUNT() bfin_read16(USB_EP_NI3_TXCOUNT) +#define bfin_write_USB_EP_NI3_TXCOUNT(val) bfin_write16(USB_EP_NI3_TXCOUNT, val) +#define bfin_read_USB_EP_NI4_TXMAXP() bfin_read16(USB_EP_NI4_TXMAXP) +#define bfin_write_USB_EP_NI4_TXMAXP(val) bfin_write16(USB_EP_NI4_TXMAXP, val) +#define bfin_read_USB_EP_NI4_TXCSR() bfin_read16(USB_EP_NI4_TXCSR) +#define bfin_write_USB_EP_NI4_TXCSR(val) bfin_write16(USB_EP_NI4_TXCSR, val) +#define bfin_read_USB_EP_NI4_RXMAXP() bfin_read16(USB_EP_NI4_RXMAXP) +#define bfin_write_USB_EP_NI4_RXMAXP(val) bfin_write16(USB_EP_NI4_RXMAXP, val) +#define bfin_read_USB_EP_NI4_RXCSR() bfin_read16(USB_EP_NI4_RXCSR) +#define bfin_write_USB_EP_NI4_RXCSR(val) bfin_write16(USB_EP_NI4_RXCSR, val) +#define bfin_read_USB_EP_NI4_RXCOUNT() bfin_read16(USB_EP_NI4_RXCOUNT) +#define bfin_write_USB_EP_NI4_RXCOUNT(val) bfin_write16(USB_EP_NI4_RXCOUNT, val) +#define bfin_read_USB_EP_NI4_TXTYPE() bfin_read16(USB_EP_NI4_TXTYPE) +#define bfin_write_USB_EP_NI4_TXTYPE(val) bfin_write16(USB_EP_NI4_TXTYPE, val) +#define bfin_read_USB_EP_NI4_TXINTERVAL() bfin_read16(USB_EP_NI4_TXINTERVAL) +#define bfin_write_USB_EP_NI4_TXINTERVAL(val) bfin_write16(USB_EP_NI4_TXINTERVAL, val) +#define bfin_read_USB_EP_NI4_RXTYPE() bfin_read16(USB_EP_NI4_RXTYPE) +#define bfin_write_USB_EP_NI4_RXTYPE(val) bfin_write16(USB_EP_NI4_RXTYPE, val) +#define bfin_read_USB_EP_NI4_RXINTERVAL() bfin_read16(USB_EP_NI4_RXINTERVAL) +#define bfin_write_USB_EP_NI4_RXINTERVAL(val) bfin_write16(USB_EP_NI4_RXINTERVAL, val) + +/* USB Endbfin_read_()oint 5 Control Registers */ + +#define bfin_read_USB_EP_NI4_TXCOUNT() bfin_read16(USB_EP_NI4_TXCOUNT) +#define bfin_write_USB_EP_NI4_TXCOUNT(val) bfin_write16(USB_EP_NI4_TXCOUNT, val) +#define bfin_read_USB_EP_NI5_TXMAXP() bfin_read16(USB_EP_NI5_TXMAXP) +#define bfin_write_USB_EP_NI5_TXMAXP(val) bfin_write16(USB_EP_NI5_TXMAXP, val) +#define bfin_read_USB_EP_NI5_TXCSR() bfin_read16(USB_EP_NI5_TXCSR) +#define bfin_write_USB_EP_NI5_TXCSR(val) bfin_write16(USB_EP_NI5_TXCSR, val) +#define bfin_read_USB_EP_NI5_RXMAXP() bfin_read16(USB_EP_NI5_RXMAXP) +#define bfin_write_USB_EP_NI5_RXMAXP(val) bfin_write16(USB_EP_NI5_RXMAXP, val) +#define bfin_read_USB_EP_NI5_RXCSR() bfin_read16(USB_EP_NI5_RXCSR) +#define bfin_write_USB_EP_NI5_RXCSR(val) bfin_write16(USB_EP_NI5_RXCSR, val) +#define bfin_read_USB_EP_NI5_RXCOUNT() bfin_read16(USB_EP_NI5_RXCOUNT) +#define bfin_write_USB_EP_NI5_RXCOUNT(val) bfin_write16(USB_EP_NI5_RXCOUNT, val) +#define bfin_read_USB_EP_NI5_TXTYPE() bfin_read16(USB_EP_NI5_TXTYPE) +#define bfin_write_USB_EP_NI5_TXTYPE(val) bfin_write16(USB_EP_NI5_TXTYPE, val) +#define bfin_read_USB_EP_NI5_TXINTERVAL() bfin_read16(USB_EP_NI5_TXINTERVAL) +#define bfin_write_USB_EP_NI5_TXINTERVAL(val) bfin_write16(USB_EP_NI5_TXINTERVAL, val) +#define bfin_read_USB_EP_NI5_RXTYPE() bfin_read16(USB_EP_NI5_RXTYPE) +#define bfin_write_USB_EP_NI5_RXTYPE(val) bfin_write16(USB_EP_NI5_RXTYPE, val) +#define bfin_read_USB_EP_NI5_RXINTERVAL() bfin_read16(USB_EP_NI5_RXINTERVAL) +#define bfin_write_USB_EP_NI5_RXINTERVAL(val) bfin_write16(USB_EP_NI5_RXINTERVAL, val) + +/* USB Endbfin_read_()oint 6 Control Registers */ + +#define bfin_read_USB_EP_NI5_TXCOUNT() bfin_read16(USB_EP_NI5_TXCOUNT) +#define bfin_write_USB_EP_NI5_TXCOUNT(val) bfin_write16(USB_EP_NI5_TXCOUNT, val) +#define bfin_read_USB_EP_NI6_TXMAXP() bfin_read16(USB_EP_NI6_TXMAXP) +#define bfin_write_USB_EP_NI6_TXMAXP(val) bfin_write16(USB_EP_NI6_TXMAXP, val) +#define bfin_read_USB_EP_NI6_TXCSR() bfin_read16(USB_EP_NI6_TXCSR) +#define bfin_write_USB_EP_NI6_TXCSR(val) bfin_write16(USB_EP_NI6_TXCSR, val) +#define bfin_read_USB_EP_NI6_RXMAXP() bfin_read16(USB_EP_NI6_RXMAXP) +#define bfin_write_USB_EP_NI6_RXMAXP(val) bfin_write16(USB_EP_NI6_RXMAXP, val) +#define bfin_read_USB_EP_NI6_RXCSR() bfin_read16(USB_EP_NI6_RXCSR) +#define bfin_write_USB_EP_NI6_RXCSR(val) bfin_write16(USB_EP_NI6_RXCSR, val) +#define bfin_read_USB_EP_NI6_RXCOUNT() bfin_read16(USB_EP_NI6_RXCOUNT) +#define bfin_write_USB_EP_NI6_RXCOUNT(val) bfin_write16(USB_EP_NI6_RXCOUNT, val) +#define bfin_read_USB_EP_NI6_TXTYPE() bfin_read16(USB_EP_NI6_TXTYPE) +#define bfin_write_USB_EP_NI6_TXTYPE(val) bfin_write16(USB_EP_NI6_TXTYPE, val) +#define bfin_read_USB_EP_NI6_TXINTERVAL() bfin_read16(USB_EP_NI6_TXINTERVAL) +#define bfin_write_USB_EP_NI6_TXINTERVAL(val) bfin_write16(USB_EP_NI6_TXINTERVAL, val) +#define bfin_read_USB_EP_NI6_RXTYPE() bfin_read16(USB_EP_NI6_RXTYPE) +#define bfin_write_USB_EP_NI6_RXTYPE(val) bfin_write16(USB_EP_NI6_RXTYPE, val) +#define bfin_read_USB_EP_NI6_RXINTERVAL() bfin_read16(USB_EP_NI6_RXINTERVAL) +#define bfin_write_USB_EP_NI6_RXINTERVAL(val) bfin_write16(USB_EP_NI6_RXINTERVAL, val) + +/* USB Endbfin_read_()oint 7 Control Registers */ + +#define bfin_read_USB_EP_NI6_TXCOUNT() bfin_read16(USB_EP_NI6_TXCOUNT) +#define bfin_write_USB_EP_NI6_TXCOUNT(val) bfin_write16(USB_EP_NI6_TXCOUNT, val) +#define bfin_read_USB_EP_NI7_TXMAXP() bfin_read16(USB_EP_NI7_TXMAXP) +#define bfin_write_USB_EP_NI7_TXMAXP(val) bfin_write16(USB_EP_NI7_TXMAXP, val) +#define bfin_read_USB_EP_NI7_TXCSR() bfin_read16(USB_EP_NI7_TXCSR) +#define bfin_write_USB_EP_NI7_TXCSR(val) bfin_write16(USB_EP_NI7_TXCSR, val) +#define bfin_read_USB_EP_NI7_RXMAXP() bfin_read16(USB_EP_NI7_RXMAXP) +#define bfin_write_USB_EP_NI7_RXMAXP(val) bfin_write16(USB_EP_NI7_RXMAXP, val) +#define bfin_read_USB_EP_NI7_RXCSR() bfin_read16(USB_EP_NI7_RXCSR) +#define bfin_write_USB_EP_NI7_RXCSR(val) bfin_write16(USB_EP_NI7_RXCSR, val) +#define bfin_read_USB_EP_NI7_RXCOUNT() bfin_read16(USB_EP_NI7_RXCOUNT) +#define bfin_write_USB_EP_NI7_RXCOUNT(val) bfin_write16(USB_EP_NI7_RXCOUNT, val) +#define bfin_read_USB_EP_NI7_TXTYPE() bfin_read16(USB_EP_NI7_TXTYPE) +#define bfin_write_USB_EP_NI7_TXTYPE(val) bfin_write16(USB_EP_NI7_TXTYPE, val) +#define bfin_read_USB_EP_NI7_TXINTERVAL() bfin_read16(USB_EP_NI7_TXINTERVAL) +#define bfin_write_USB_EP_NI7_TXINTERVAL(val) bfin_write16(USB_EP_NI7_TXINTERVAL, val) +#define bfin_read_USB_EP_NI7_RXTYPE() bfin_read16(USB_EP_NI7_RXTYPE) +#define bfin_write_USB_EP_NI7_RXTYPE(val) bfin_write16(USB_EP_NI7_RXTYPE, val) +#define bfin_read_USB_EP_NI7_RXINTERVAL() bfin_read16(USB_EP_NI7_RXINTERVAL) +#define bfin_write_USB_EP_NI7_RXINTERVAL(val) bfin_write16(USB_EP_NI7_RXINTERVAL, val) +#define bfin_read_USB_EP_NI7_TXCOUNT() bfin_read16(USB_EP_NI7_TXCOUNT) +#define bfin_write_USB_EP_NI7_TXCOUNT(val) bfin_write16(USB_EP_NI7_TXCOUNT, val) +#define bfin_read_USB_DMA_INTERRUPT() bfin_read16(USB_DMA_INTERRUPT) +#define bfin_write_USB_DMA_INTERRUPT(val) bfin_write16(USB_DMA_INTERRUPT, val) + +/* USB Channel 0 Config Registers */ + +#define bfin_read_USB_DMA0CONTROL() bfin_read16(USB_DMA0CONTROL) +#define bfin_write_USB_DMA0CONTROL(val) bfin_write16(USB_DMA0CONTROL, val) +#define bfin_read_USB_DMA0ADDRLOW() bfin_read16(USB_DMA0ADDRLOW) +#define bfin_write_USB_DMA0ADDRLOW(val) bfin_write16(USB_DMA0ADDRLOW, val) +#define bfin_read_USB_DMA0ADDRHIGH() bfin_read16(USB_DMA0ADDRHIGH) +#define bfin_write_USB_DMA0ADDRHIGH(val) bfin_write16(USB_DMA0ADDRHIGH, val) +#define bfin_read_USB_DMA0COUNTLOW() bfin_read16(USB_DMA0COUNTLOW) +#define bfin_write_USB_DMA0COUNTLOW(val) bfin_write16(USB_DMA0COUNTLOW, val) +#define bfin_read_USB_DMA0COUNTHIGH() bfin_read16(USB_DMA0COUNTHIGH) +#define bfin_write_USB_DMA0COUNTHIGH(val) bfin_write16(USB_DMA0COUNTHIGH, val) + +/* USB Channel 1 Config Registers */ + +#define bfin_read_USB_DMA1CONTROL() bfin_read16(USB_DMA1CONTROL) +#define bfin_write_USB_DMA1CONTROL(val) bfin_write16(USB_DMA1CONTROL, val) +#define bfin_read_USB_DMA1ADDRLOW() bfin_read16(USB_DMA1ADDRLOW) +#define bfin_write_USB_DMA1ADDRLOW(val) bfin_write16(USB_DMA1ADDRLOW, val) +#define bfin_read_USB_DMA1ADDRHIGH() bfin_read16(USB_DMA1ADDRHIGH) +#define bfin_write_USB_DMA1ADDRHIGH(val) bfin_write16(USB_DMA1ADDRHIGH, val) +#define bfin_read_USB_DMA1COUNTLOW() bfin_read16(USB_DMA1COUNTLOW) +#define bfin_write_USB_DMA1COUNTLOW(val) bfin_write16(USB_DMA1COUNTLOW, val) +#define bfin_read_USB_DMA1COUNTHIGH() bfin_read16(USB_DMA1COUNTHIGH) +#define bfin_write_USB_DMA1COUNTHIGH(val) bfin_write16(USB_DMA1COUNTHIGH, val) + +/* USB Channel 2 Config Registers */ + +#define bfin_read_USB_DMA2CONTROL() bfin_read16(USB_DMA2CONTROL) +#define bfin_write_USB_DMA2CONTROL(val) bfin_write16(USB_DMA2CONTROL, val) +#define bfin_read_USB_DMA2ADDRLOW() bfin_read16(USB_DMA2ADDRLOW) +#define bfin_write_USB_DMA2ADDRLOW(val) bfin_write16(USB_DMA2ADDRLOW, val) +#define bfin_read_USB_DMA2ADDRHIGH() bfin_read16(USB_DMA2ADDRHIGH) +#define bfin_write_USB_DMA2ADDRHIGH(val) bfin_write16(USB_DMA2ADDRHIGH, val) +#define bfin_read_USB_DMA2COUNTLOW() bfin_read16(USB_DMA2COUNTLOW) +#define bfin_write_USB_DMA2COUNTLOW(val) bfin_write16(USB_DMA2COUNTLOW, val) +#define bfin_read_USB_DMA2COUNTHIGH() bfin_read16(USB_DMA2COUNTHIGH) +#define bfin_write_USB_DMA2COUNTHIGH(val) bfin_write16(USB_DMA2COUNTHIGH, val) + +/* USB Channel 3 Config Registers */ + +#define bfin_read_USB_DMA3CONTROL() bfin_read16(USB_DMA3CONTROL) +#define bfin_write_USB_DMA3CONTROL(val) bfin_write16(USB_DMA3CONTROL, val) +#define bfin_read_USB_DMA3ADDRLOW() bfin_read16(USB_DMA3ADDRLOW) +#define bfin_write_USB_DMA3ADDRLOW(val) bfin_write16(USB_DMA3ADDRLOW, val) +#define bfin_read_USB_DMA3ADDRHIGH() bfin_read16(USB_DMA3ADDRHIGH) +#define bfin_write_USB_DMA3ADDRHIGH(val) bfin_write16(USB_DMA3ADDRHIGH, val) +#define bfin_read_USB_DMA3COUNTLOW() bfin_read16(USB_DMA3COUNTLOW) +#define bfin_write_USB_DMA3COUNTLOW(val) bfin_write16(USB_DMA3COUNTLOW, val) +#define bfin_read_USB_DMA3COUNTHIGH() bfin_read16(USB_DMA3COUNTHIGH) +#define bfin_write_USB_DMA3COUNTHIGH(val) bfin_write16(USB_DMA3COUNTHIGH, val) + +/* USB Channel 4 Config Registers */ + +#define bfin_read_USB_DMA4CONTROL() bfin_read16(USB_DMA4CONTROL) +#define bfin_write_USB_DMA4CONTROL(val) bfin_write16(USB_DMA4CONTROL, val) +#define bfin_read_USB_DMA4ADDRLOW() bfin_read16(USB_DMA4ADDRLOW) +#define bfin_write_USB_DMA4ADDRLOW(val) bfin_write16(USB_DMA4ADDRLOW, val) +#define bfin_read_USB_DMA4ADDRHIGH() bfin_read16(USB_DMA4ADDRHIGH) +#define bfin_write_USB_DMA4ADDRHIGH(val) bfin_write16(USB_DMA4ADDRHIGH, val) +#define bfin_read_USB_DMA4COUNTLOW() bfin_read16(USB_DMA4COUNTLOW) +#define bfin_write_USB_DMA4COUNTLOW(val) bfin_write16(USB_DMA4COUNTLOW, val) +#define bfin_read_USB_DMA4COUNTHIGH() bfin_read16(USB_DMA4COUNTHIGH) +#define bfin_write_USB_DMA4COUNTHIGH(val) bfin_write16(USB_DMA4COUNTHIGH, val) + +/* USB Channel 5 Config Registers */ + +#define bfin_read_USB_DMA5CONTROL() bfin_read16(USB_DMA5CONTROL) +#define bfin_write_USB_DMA5CONTROL(val) bfin_write16(USB_DMA5CONTROL, val) +#define bfin_read_USB_DMA5ADDRLOW() bfin_read16(USB_DMA5ADDRLOW) +#define bfin_write_USB_DMA5ADDRLOW(val) bfin_write16(USB_DMA5ADDRLOW, val) +#define bfin_read_USB_DMA5ADDRHIGH() bfin_read16(USB_DMA5ADDRHIGH) +#define bfin_write_USB_DMA5ADDRHIGH(val) bfin_write16(USB_DMA5ADDRHIGH, val) +#define bfin_read_USB_DMA5COUNTLOW() bfin_read16(USB_DMA5COUNTLOW) +#define bfin_write_USB_DMA5COUNTLOW(val) bfin_write16(USB_DMA5COUNTLOW, val) +#define bfin_read_USB_DMA5COUNTHIGH() bfin_read16(USB_DMA5COUNTHIGH) +#define bfin_write_USB_DMA5COUNTHIGH(val) bfin_write16(USB_DMA5COUNTHIGH, val) + +/* USB Channel 6 Config Registers */ + +#define bfin_read_USB_DMA6CONTROL() bfin_read16(USB_DMA6CONTROL) +#define bfin_write_USB_DMA6CONTROL(val) bfin_write16(USB_DMA6CONTROL, val) +#define bfin_read_USB_DMA6ADDRLOW() bfin_read16(USB_DMA6ADDRLOW) +#define bfin_write_USB_DMA6ADDRLOW(val) bfin_write16(USB_DMA6ADDRLOW, val) +#define bfin_read_USB_DMA6ADDRHIGH() bfin_read16(USB_DMA6ADDRHIGH) +#define bfin_write_USB_DMA6ADDRHIGH(val) bfin_write16(USB_DMA6ADDRHIGH, val) +#define bfin_read_USB_DMA6COUNTLOW() bfin_read16(USB_DMA6COUNTLOW) +#define bfin_write_USB_DMA6COUNTLOW(val) bfin_write16(USB_DMA6COUNTLOW, val) +#define bfin_read_USB_DMA6COUNTHIGH() bfin_read16(USB_DMA6COUNTHIGH) +#define bfin_write_USB_DMA6COUNTHIGH(val) bfin_write16(USB_DMA6COUNTHIGH, val) + +/* USB Channel 7 Config Registers */ + +#define bfin_read_USB_DMA7CONTROL() bfin_read16(USB_DMA7CONTROL) +#define bfin_write_USB_DMA7CONTROL(val) bfin_write16(USB_DMA7CONTROL, val) +#define bfin_read_USB_DMA7ADDRLOW() bfin_read16(USB_DMA7ADDRLOW) +#define bfin_write_USB_DMA7ADDRLOW(val) bfin_write16(USB_DMA7ADDRLOW, val) +#define bfin_read_USB_DMA7ADDRHIGH() bfin_read16(USB_DMA7ADDRHIGH) +#define bfin_write_USB_DMA7ADDRHIGH(val) bfin_write16(USB_DMA7ADDRHIGH, val) +#define bfin_read_USB_DMA7COUNTLOW() bfin_read16(USB_DMA7COUNTLOW) +#define bfin_write_USB_DMA7COUNTLOW(val) bfin_write16(USB_DMA7COUNTLOW, val) +#define bfin_read_USB_DMA7COUNTHIGH() bfin_read16(USB_DMA7COUNTHIGH) +#define bfin_write_USB_DMA7COUNTHIGH(val) bfin_write16(USB_DMA7COUNTHIGH, val) + +/* Keybfin_read_()ad Registers */ + +#define bfin_read_KPAD_CTL() bfin_read16(KPAD_CTL) +#define bfin_write_KPAD_CTL(val) bfin_write16(KPAD_CTL, val) +#define bfin_read_KPAD_PRESCALE() bfin_read16(KPAD_PRESCALE) +#define bfin_write_KPAD_PRESCALE(val) bfin_write16(KPAD_PRESCALE, val) +#define bfin_read_KPAD_MSEL() bfin_read16(KPAD_MSEL) +#define bfin_write_KPAD_MSEL(val) bfin_write16(KPAD_MSEL, val) +#define bfin_read_KPAD_ROWCOL() bfin_read16(KPAD_ROWCOL) +#define bfin_write_KPAD_ROWCOL(val) bfin_write16(KPAD_ROWCOL, val) +#define bfin_read_KPAD_STAT() bfin_read16(KPAD_STAT) +#define bfin_write_KPAD_STAT(val) bfin_write16(KPAD_STAT, val) +#define bfin_read_KPAD_SOFTEVAL() bfin_read16(KPAD_SOFTEVAL) +#define bfin_write_KPAD_SOFTEVAL(val) bfin_write16(KPAD_SOFTEVAL, val) + +/* Pixel Combfin_read_()ositor (PIXC) Registers */ + +#define bfin_read_PIXC_CTL() bfin_read16(PIXC_CTL) +#define bfin_write_PIXC_CTL(val) bfin_write16(PIXC_CTL, val) +#define bfin_read_PIXC_PPL() bfin_read16(PIXC_PPL) +#define bfin_write_PIXC_PPL(val) bfin_write16(PIXC_PPL, val) +#define bfin_read_PIXC_LPF() bfin_read16(PIXC_LPF) +#define bfin_write_PIXC_LPF(val) bfin_write16(PIXC_LPF, val) +#define bfin_read_PIXC_AHSTART() bfin_read16(PIXC_AHSTART) +#define bfin_write_PIXC_AHSTART(val) bfin_write16(PIXC_AHSTART, val) +#define bfin_read_PIXC_AHEND() bfin_read16(PIXC_AHEND) +#define bfin_write_PIXC_AHEND(val) bfin_write16(PIXC_AHEND, val) +#define bfin_read_PIXC_AVSTART() bfin_read16(PIXC_AVSTART) +#define bfin_write_PIXC_AVSTART(val) bfin_write16(PIXC_AVSTART, val) +#define bfin_read_PIXC_AVEND() bfin_read16(PIXC_AVEND) +#define bfin_write_PIXC_AVEND(val) bfin_write16(PIXC_AVEND, val) +#define bfin_read_PIXC_ATRANSP() bfin_read16(PIXC_ATRANSP) +#define bfin_write_PIXC_ATRANSP(val) bfin_write16(PIXC_ATRANSP, val) +#define bfin_read_PIXC_BHSTART() bfin_read16(PIXC_BHSTART) +#define bfin_write_PIXC_BHSTART(val) bfin_write16(PIXC_BHSTART, val) +#define bfin_read_PIXC_BHEND() bfin_read16(PIXC_BHEND) +#define bfin_write_PIXC_BHEND(val) bfin_write16(PIXC_BHEND, val) +#define bfin_read_PIXC_BVSTART() bfin_read16(PIXC_BVSTART) +#define bfin_write_PIXC_BVSTART(val) bfin_write16(PIXC_BVSTART, val) +#define bfin_read_PIXC_BVEND() bfin_read16(PIXC_BVEND) +#define bfin_write_PIXC_BVEND(val) bfin_write16(PIXC_BVEND, val) +#define bfin_read_PIXC_BTRANSP() bfin_read16(PIXC_BTRANSP) +#define bfin_write_PIXC_BTRANSP(val) bfin_write16(PIXC_BTRANSP, val) +#define bfin_read_PIXC_INTRSTAT() bfin_read16(PIXC_INTRSTAT) +#define bfin_write_PIXC_INTRSTAT(val) bfin_write16(PIXC_INTRSTAT, val) +#define bfin_read_PIXC_RYCON() bfin_read32(PIXC_RYCON) +#define bfin_write_PIXC_RYCON(val) bfin_write32(PIXC_RYCON, val) +#define bfin_read_PIXC_GUCON() bfin_read32(PIXC_GUCON) +#define bfin_write_PIXC_GUCON(val) bfin_write32(PIXC_GUCON, val) +#define bfin_read_PIXC_BVCON() bfin_read32(PIXC_BVCON) +#define bfin_write_PIXC_BVCON(val) bfin_write32(PIXC_BVCON, val) +#define bfin_read_PIXC_CCBIAS() bfin_read32(PIXC_CCBIAS) +#define bfin_write_PIXC_CCBIAS(val) bfin_write32(PIXC_CCBIAS, val) +#define bfin_read_PIXC_TC() bfin_read32(PIXC_TC) +#define bfin_write_PIXC_TC(val) bfin_write32(PIXC_TC, val) + +/* Handshake MDMA 0 Registers */ + +#define bfin_read_HMDMA0_CONTROL() bfin_read16(HMDMA0_CONTROL) +#define bfin_write_HMDMA0_CONTROL(val) bfin_write16(HMDMA0_CONTROL, val) +#define bfin_read_HMDMA0_ECINIT() bfin_read16(HMDMA0_ECINIT) +#define bfin_write_HMDMA0_ECINIT(val) bfin_write16(HMDMA0_ECINIT, val) +#define bfin_read_HMDMA0_BCINIT() bfin_read16(HMDMA0_BCINIT) +#define bfin_write_HMDMA0_BCINIT(val) bfin_write16(HMDMA0_BCINIT, val) +#define bfin_read_HMDMA0_ECURGENT() bfin_read16(HMDMA0_ECURGENT) +#define bfin_write_HMDMA0_ECURGENT(val) bfin_write16(HMDMA0_ECURGENT, val) +#define bfin_read_HMDMA0_ECOVERFLOW() bfin_read16(HMDMA0_ECOVERFLOW) +#define bfin_write_HMDMA0_ECOVERFLOW(val) bfin_write16(HMDMA0_ECOVERFLOW, val) +#define bfin_read_HMDMA0_ECOUNT() bfin_read16(HMDMA0_ECOUNT) +#define bfin_write_HMDMA0_ECOUNT(val) bfin_write16(HMDMA0_ECOUNT, val) +#define bfin_read_HMDMA0_BCOUNT() bfin_read16(HMDMA0_BCOUNT) +#define bfin_write_HMDMA0_BCOUNT(val) bfin_write16(HMDMA0_BCOUNT, val) + +/* Handshake MDMA 1 Registers */ + +#define bfin_read_HMDMA1_CONTROL() bfin_read16(HMDMA1_CONTROL) +#define bfin_write_HMDMA1_CONTROL(val) bfin_write16(HMDMA1_CONTROL, val) +#define bfin_read_HMDMA1_ECINIT() bfin_read16(HMDMA1_ECINIT) +#define bfin_write_HMDMA1_ECINIT(val) bfin_write16(HMDMA1_ECINIT, val) +#define bfin_read_HMDMA1_BCINIT() bfin_read16(HMDMA1_BCINIT) +#define bfin_write_HMDMA1_BCINIT(val) bfin_write16(HMDMA1_BCINIT, val) +#define bfin_read_HMDMA1_ECURGENT() bfin_read16(HMDMA1_ECURGENT) +#define bfin_write_HMDMA1_ECURGENT(val) bfin_write16(HMDMA1_ECURGENT, val) +#define bfin_read_HMDMA1_ECOVERFLOW() bfin_read16(HMDMA1_ECOVERFLOW) +#define bfin_write_HMDMA1_ECOVERFLOW(val) bfin_write16(HMDMA1_ECOVERFLOW, val) +#define bfin_read_HMDMA1_ECOUNT() bfin_read16(HMDMA1_ECOUNT) +#define bfin_write_HMDMA1_ECOUNT(val) bfin_write16(HMDMA1_ECOUNT, val) +#define bfin_read_HMDMA1_BCOUNT() bfin_read16(HMDMA1_BCOUNT) +#define bfin_write_HMDMA1_BCOUNT(val) bfin_write16(HMDMA1_BCOUNT, val) + +#endif /* _CDEF_BF548_H */ diff --git a/include/asm-blackfin/mach-bf548/cdefBF549.h b/include/asm-blackfin/mach-bf548/cdefBF549.h new file mode 100644 index 00000000000000..2ab5b7c008206f --- /dev/null +++ b/include/asm-blackfin/mach-bf548/cdefBF549.h @@ -0,0 +1,1896 @@ +/* + * File: include/asm-blackfin/mach-bf549/cdefBF549.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _CDEF_BF549_H +#define _CDEF_BF549_H + +/* include all Core registers and bit definitions */ +#include "defBF549.h" + +/* include core sbfin_read_()ecific register pointer definitions */ +#include <asm/mach-common/cdef_LPBlackfin.h> + +/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF549 */ + +/* include cdefBF54x_base.h for the set of #defines that are common to all ADSP-BF54x bfin_read_()rocessors */ +#include "cdefBF54x_base.h" + +/* The following are the #defines needed by ADSP-BF549 that are not in the common header */ + +/* Timer Registers */ + +#define bfin_read_TIMER8_CONFIG() bfin_read16(TIMER8_CONFIG) +#define bfin_write_TIMER8_CONFIG(val) bfin_write16(TIMER8_CONFIG, val) +#define bfin_read_TIMER8_COUNTER() bfin_read32(TIMER8_COUNTER) +#define bfin_write_TIMER8_COUNTER(val) bfin_write32(TIMER8_COUNTER, val) +#define bfin_read_TIMER8_PERIOD() bfin_read32(TIMER8_PERIOD) +#define bfin_write_TIMER8_PERIOD(val) bfin_write32(TIMER8_PERIOD, val) +#define bfin_read_TIMER8_WIDTH() bfin_read32(TIMER8_WIDTH) +#define bfin_write_TIMER8_WIDTH(val) bfin_write32(TIMER8_WIDTH, val) +#define bfin_read_TIMER9_CONFIG() bfin_read16(TIMER9_CONFIG) +#define bfin_write_TIMER9_CONFIG(val) bfin_write16(TIMER9_CONFIG, val) +#define bfin_read_TIMER9_COUNTER() bfin_read32(TIMER9_COUNTER) +#define bfin_write_TIMER9_COUNTER(val) bfin_write32(TIMER9_COUNTER, val) +#define bfin_read_TIMER9_PERIOD() bfin_read32(TIMER9_PERIOD) +#define bfin_write_TIMER9_PERIOD(val) bfin_write32(TIMER9_PERIOD, val) +#define bfin_read_TIMER9_WIDTH() bfin_read32(TIMER9_WIDTH) +#define bfin_write_TIMER9_WIDTH(val) bfin_write32(TIMER9_WIDTH, val) +#define bfin_read_TIMER10_CONFIG() bfin_read16(TIMER10_CONFIG) +#define bfin_write_TIMER10_CONFIG(val) bfin_write16(TIMER10_CONFIG, val) +#define bfin_read_TIMER10_COUNTER() bfin_read32(TIMER10_COUNTER) +#define bfin_write_TIMER10_COUNTER(val) bfin_write32(TIMER10_COUNTER, val) +#define bfin_read_TIMER10_PERIOD() bfin_read32(TIMER10_PERIOD) +#define bfin_write_TIMER10_PERIOD(val) bfin_write32(TIMER10_PERIOD, val) +#define bfin_read_TIMER10_WIDTH() bfin_read32(TIMER10_WIDTH) +#define bfin_write_TIMER10_WIDTH(val) bfin_write32(TIMER10_WIDTH, val) + +/* Timer Groubfin_read_() of 3 */ + +#define bfin_read_TIMER_ENABLE1() bfin_read16(TIMER_ENABLE1) +#define bfin_write_TIMER_ENABLE1(val) bfin_write16(TIMER_ENABLE1, val) +#define bfin_read_TIMER_DISABLE1() bfin_read16(TIMER_DISABLE1) +#define bfin_write_TIMER_DISABLE1(val) bfin_write16(TIMER_DISABLE1, val) +#define bfin_read_TIMER_STATUS1() bfin_read32(TIMER_STATUS1) +#define bfin_write_TIMER_STATUS1(val) bfin_write32(TIMER_STATUS1, val) + +/* SPORT0 Registers */ + +#define bfin_read_SPORT0_TCR1() bfin_read16(SPORT0_TCR1) +#define bfin_write_SPORT0_TCR1(val) bfin_write16(SPORT0_TCR1, val) +#define bfin_read_SPORT0_TCR2() bfin_read16(SPORT0_TCR2) +#define bfin_write_SPORT0_TCR2(val) bfin_write16(SPORT0_TCR2, val) +#define bfin_read_SPORT0_TCLKDIV() bfin_read16(SPORT0_TCLKDIV) +#define bfin_write_SPORT0_TCLKDIV(val) bfin_write16(SPORT0_TCLKDIV, val) +#define bfin_read_SPORT0_TFSDIV() bfin_read16(SPORT0_TFSDIV) +#define bfin_write_SPORT0_TFSDIV(val) bfin_write16(SPORT0_TFSDIV, val) +#define bfin_read_SPORT0_TX() bfin_read32(SPORT0_TX) +#define bfin_write_SPORT0_TX(val) bfin_write32(SPORT0_TX, val) +#define bfin_read_SPORT0_RX() bfin_read32(SPORT0_RX) +#define bfin_write_SPORT0_RX(val) bfin_write32(SPORT0_RX, val) +#define bfin_read_SPORT0_RCR1() bfin_read16(SPORT0_RCR1) +#define bfin_write_SPORT0_RCR1(val) bfin_write16(SPORT0_RCR1, val) +#define bfin_read_SPORT0_RCR2() bfin_read16(SPORT0_RCR2) +#define bfin_write_SPORT0_RCR2(val) bfin_write16(SPORT0_RCR2, val) +#define bfin_read_SPORT0_RCLKDIV() bfin_read16(SPORT0_RCLKDIV) +#define bfin_write_SPORT0_RCLKDIV(val) bfin_write16(SPORT0_RCLKDIV, val) +#define bfin_read_SPORT0_RFSDIV() bfin_read16(SPORT0_RFSDIV) +#define bfin_write_SPORT0_RFSDIV(val) bfin_write16(SPORT0_RFSDIV, val) +#define bfin_read_SPORT0_STAT() bfin_read16(SPORT0_STAT) +#define bfin_write_SPORT0_STAT(val) bfin_write16(SPORT0_STAT, val) +#define bfin_read_SPORT0_CHNL() bfin_read16(SPORT0_CHNL) +#define bfin_write_SPORT0_CHNL(val) bfin_write16(SPORT0_CHNL, val) +#define bfin_read_SPORT0_MCMC1() bfin_read16(SPORT0_MCMC1) +#define bfin_write_SPORT0_MCMC1(val) bfin_write16(SPORT0_MCMC1, val) +#define bfin_read_SPORT0_MCMC2() bfin_read16(SPORT0_MCMC2) +#define bfin_write_SPORT0_MCMC2(val) bfin_write16(SPORT0_MCMC2, val) +#define bfin_read_SPORT0_MTCS0() bfin_read32(SPORT0_MTCS0) +#define bfin_write_SPORT0_MTCS0(val) bfin_write32(SPORT0_MTCS0, val) +#define bfin_read_SPORT0_MTCS1() bfin_read32(SPORT0_MTCS1) +#define bfin_write_SPORT0_MTCS1(val) bfin_write32(SPORT0_MTCS1, val) +#define bfin_read_SPORT0_MTCS2() bfin_read32(SPORT0_MTCS2) +#define bfin_write_SPORT0_MTCS2(val) bfin_write32(SPORT0_MTCS2, val) +#define bfin_read_SPORT0_MTCS3() bfin_read32(SPORT0_MTCS3) +#define bfin_write_SPORT0_MTCS3(val) bfin_write32(SPORT0_MTCS3, val) +#define bfin_read_SPORT0_MRCS0() bfin_read32(SPORT0_MRCS0) +#define bfin_write_SPORT0_MRCS0(val) bfin_write32(SPORT0_MRCS0, val) +#define bfin_read_SPORT0_MRCS1() bfin_read32(SPORT0_MRCS1) +#define bfin_write_SPORT0_MRCS1(val) bfin_write32(SPORT0_MRCS1, val) +#define bfin_read_SPORT0_MRCS2() bfin_read32(SPORT0_MRCS2) +#define bfin_write_SPORT0_MRCS2(val) bfin_write32(SPORT0_MRCS2, val) +#define bfin_read_SPORT0_MRCS3() bfin_read32(SPORT0_MRCS3) +#define bfin_write_SPORT0_MRCS3(val) bfin_write32(SPORT0_MRCS3, val) + +/* EPPI0 Registers */ + +#define bfin_read_EPPI0_STATUS() bfin_read16(EPPI0_STATUS) +#define bfin_write_EPPI0_STATUS(val) bfin_write16(EPPI0_STATUS, val) +#define bfin_read_EPPI0_HCOUNT() bfin_read16(EPPI0_HCOUNT) +#define bfin_write_EPPI0_HCOUNT(val) bfin_write16(EPPI0_HCOUNT, val) +#define bfin_read_EPPI0_HDELAY() bfin_read16(EPPI0_HDELAY) +#define bfin_write_EPPI0_HDELAY(val) bfin_write16(EPPI0_HDELAY, val) +#define bfin_read_EPPI0_VCOUNT() bfin_read16(EPPI0_VCOUNT) +#define bfin_write_EPPI0_VCOUNT(val) bfin_write16(EPPI0_VCOUNT, val) +#define bfin_read_EPPI0_VDELAY() bfin_read16(EPPI0_VDELAY) +#define bfin_write_EPPI0_VDELAY(val) bfin_write16(EPPI0_VDELAY, val) +#define bfin_read_EPPI0_FRAME() bfin_read16(EPPI0_FRAME) +#define bfin_write_EPPI0_FRAME(val) bfin_write16(EPPI0_FRAME, val) +#define bfin_read_EPPI0_LINE() bfin_read16(EPPI0_LINE) +#define bfin_write_EPPI0_LINE(val) bfin_write16(EPPI0_LINE, val) +#define bfin_read_EPPI0_CLKDIV() bfin_read16(EPPI0_CLKDIV) +#define bfin_write_EPPI0_CLKDIV(val) bfin_write16(EPPI0_CLKDIV, val) +#define bfin_read_EPPI0_CONTROL() bfin_read32(EPPI0_CONTROL) +#define bfin_write_EPPI0_CONTROL(val) bfin_write32(EPPI0_CONTROL, val) +#define bfin_read_EPPI0_FS1W_HBL() bfin_read32(EPPI0_FS1W_HBL) +#define bfin_write_EPPI0_FS1W_HBL(val) bfin_write32(EPPI0_FS1W_HBL, val) +#define bfin_read_EPPI0_FS1P_AVPL() bfin_read32(EPPI0_FS1P_AVPL) +#define bfin_write_EPPI0_FS1P_AVPL(val) bfin_write32(EPPI0_FS1P_AVPL, val) +#define bfin_read_EPPI0_FS2W_LVB() bfin_read32(EPPI0_FS2W_LVB) +#define bfin_write_EPPI0_FS2W_LVB(val) bfin_write32(EPPI0_FS2W_LVB, val) +#define bfin_read_EPPI0_FS2P_LAVF() bfin_read32(EPPI0_FS2P_LAVF) +#define bfin_write_EPPI0_FS2P_LAVF(val) bfin_write32(EPPI0_FS2P_LAVF, val) +#define bfin_read_EPPI0_CLIP() bfin_read32(EPPI0_CLIP) +#define bfin_write_EPPI0_CLIP(val) bfin_write32(EPPI0_CLIP, val) + +/* UART2 Registers */ + +#define bfin_read_UART2_DLL() bfin_read16(UART2_DLL) +#define bfin_write_UART2_DLL(val) bfin_write16(UART2_DLL, val) +#define bfin_read_UART2_DLH() bfin_read16(UART2_DLH) +#define bfin_write_UART2_DLH(val) bfin_write16(UART2_DLH, val) +#define bfin_read_UART2_GCTL() bfin_read16(UART2_GCTL) +#define bfin_write_UART2_GCTL(val) bfin_write16(UART2_GCTL, val) +#define bfin_read_UART2_LCR() bfin_read16(UART2_LCR) +#define bfin_write_UART2_LCR(val) bfin_write16(UART2_LCR, val) +#define bfin_read_UART2_MCR() bfin_read16(UART2_MCR) +#define bfin_write_UART2_MCR(val) bfin_write16(UART2_MCR, val) +#define bfin_read_UART2_LSR() bfin_read16(UART2_LSR) +#define bfin_write_UART2_LSR(val) bfin_write16(UART2_LSR, val) +#define bfin_read_UART2_MSR() bfin_read16(UART2_MSR) +#define bfin_write_UART2_MSR(val) bfin_write16(UART2_MSR, val) +#define bfin_read_UART2_SCR() bfin_read16(UART2_SCR) +#define bfin_write_UART2_SCR(val) bfin_write16(UART2_SCR, val) +#define bfin_read_UART2_IER_SET() bfin_read16(UART2_IER_SET) +#define bfin_write_UART2_IER_SET(val) bfin_write16(UART2_IER_SET, val) +#define bfin_read_UART2_IER_CLEAR() bfin_read16(UART2_IER_CLEAR) +#define bfin_write_UART2_IER_CLEAR(val) bfin_write16(UART2_IER_CLEAR, val) +#define bfin_read_UART2_RBR() bfin_read16(UART2_RBR) +#define bfin_write_UART2_RBR(val) bfin_write16(UART2_RBR, val) + +/* Two Wire Interface Registers (TWI1) */ + +#define bfin_read_TWI1_CLKDIV() bfin_read16(TWI1_CLKDIV) +#define bfin_write_TWI1_CLKDIV(val) bfin_write16(TWI1_CLKDIV, val) +#define bfin_read_TWI1_CONTROL() bfin_read16(TWI1_CONTROL) +#define bfin_write_TWI1_CONTROL(val) bfin_write16(TWI1_CONTROL, val) +#define bfin_read_TWI1_SLAVE_CTRL() bfin_read16(TWI1_SLAVE_CTRL) +#define bfin_write_TWI1_SLAVE_CTRL(val) bfin_write16(TWI1_SLAVE_CTRL, val) +#define bfin_read_TWI1_SLAVE_STAT() bfin_read16(TWI1_SLAVE_STAT) +#define bfin_write_TWI1_SLAVE_STAT(val) bfin_write16(TWI1_SLAVE_STAT, val) +#define bfin_read_TWI1_SLAVE_ADDR() bfin_read16(TWI1_SLAVE_ADDR) +#define bfin_write_TWI1_SLAVE_ADDR(val) bfin_write16(TWI1_SLAVE_ADDR, val) +#define bfin_read_TWI1_MASTER_CTRL() bfin_read16(TWI1_MASTER_CTRL) +#define bfin_write_TWI1_MASTER_CTRL(val) bfin_write16(TWI1_MASTER_CTRL, val) +#define bfin_read_TWI1_MASTER_STAT() bfin_read16(TWI1_MASTER_STAT) +#define bfin_write_TWI1_MASTER_STAT(val) bfin_write16(TWI1_MASTER_STAT, val) +#define bfin_read_TWI1_MASTER_ADDR() bfin_read16(TWI1_MASTER_ADDR) +#define bfin_write_TWI1_MASTER_ADDR(val) bfin_write16(TWI1_MASTER_ADDR, val) +#define bfin_read_TWI1_INT_STAT() bfin_read16(TWI1_INT_STAT) +#define bfin_write_TWI1_INT_STAT(val) bfin_write16(TWI1_INT_STAT, val) +#define bfin_read_TWI1_INT_MASK() bfin_read16(TWI1_INT_MASK) +#define bfin_write_TWI1_INT_MASK(val) bfin_write16(TWI1_INT_MASK, val) +#define bfin_read_TWI1_FIFO_CTRL() bfin_read16(TWI1_FIFO_CTRL) +#define bfin_write_TWI1_FIFO_CTRL(val) bfin_write16(TWI1_FIFO_CTRL, val) +#define bfin_read_TWI1_FIFO_STAT() bfin_read16(TWI1_FIFO_STAT) +#define bfin_write_TWI1_FIFO_STAT(val) bfin_write16(TWI1_FIFO_STAT, val) +#define bfin_read_TWI1_XMT_DATA8() bfin_read16(TWI1_XMT_DATA8) +#define bfin_write_TWI1_XMT_DATA8(val) bfin_write16(TWI1_XMT_DATA8, val) +#define bfin_read_TWI1_XMT_DATA16() bfin_read16(TWI1_XMT_DATA16) +#define bfin_write_TWI1_XMT_DATA16(val) bfin_write16(TWI1_XMT_DATA16, val) +#define bfin_read_TWI1_RCV_DATA8() bfin_read16(TWI1_RCV_DATA8) +#define bfin_write_TWI1_RCV_DATA8(val) bfin_write16(TWI1_RCV_DATA8, val) +#define bfin_read_TWI1_RCV_DATA16() bfin_read16(TWI1_RCV_DATA16) +#define bfin_write_TWI1_RCV_DATA16(val) bfin_write16(TWI1_RCV_DATA16, val) + +/* SPI2 Registers */ + +#define bfin_read_SPI2_CTL() bfin_read16(SPI2_CTL) +#define bfin_write_SPI2_CTL(val) bfin_write16(SPI2_CTL, val) +#define bfin_read_SPI2_FLG() bfin_read16(SPI2_FLG) +#define bfin_write_SPI2_FLG(val) bfin_write16(SPI2_FLG, val) +#define bfin_read_SPI2_STAT() bfin_read16(SPI2_STAT) +#define bfin_write_SPI2_STAT(val) bfin_write16(SPI2_STAT, val) +#define bfin_read_SPI2_TDBR() bfin_read16(SPI2_TDBR) +#define bfin_write_SPI2_TDBR(val) bfin_write16(SPI2_TDBR, val) +#define bfin_read_SPI2_RDBR() bfin_read16(SPI2_RDBR) +#define bfin_write_SPI2_RDBR(val) bfin_write16(SPI2_RDBR, val) +#define bfin_read_SPI2_BAUD() bfin_read16(SPI2_BAUD) +#define bfin_write_SPI2_BAUD(val) bfin_write16(SPI2_BAUD, val) +#define bfin_read_SPI2_SHADOW() bfin_read16(SPI2_SHADOW) +#define bfin_write_SPI2_SHADOW(val) bfin_write16(SPI2_SHADOW, val) + +/* MXVR Registers */ + +#define bfin_read_MXVR_CONFIG() bfin_read16(MXVR_CONFIG) +#define bfin_write_MXVR_CONFIG(val) bfin_write16(MXVR_CONFIG, val) +#define bfin_read_MXVR_STATE_0() bfin_read32(MXVR_STATE_0) +#define bfin_write_MXVR_STATE_0(val) bfin_write32(MXVR_STATE_0, val) +#define bfin_read_MXVR_STATE_1() bfin_read32(MXVR_STATE_1) +#define bfin_write_MXVR_STATE_1(val) bfin_write32(MXVR_STATE_1, val) +#define bfin_read_MXVR_INT_STAT_0() bfin_read32(MXVR_INT_STAT_0) +#define bfin_write_MXVR_INT_STAT_0(val) bfin_write32(MXVR_INT_STAT_0, val) +#define bfin_read_MXVR_INT_STAT_1() bfin_read32(MXVR_INT_STAT_1) +#define bfin_write_MXVR_INT_STAT_1(val) bfin_write32(MXVR_INT_STAT_1, val) +#define bfin_read_MXVR_INT_EN_0() bfin_read32(MXVR_INT_EN_0) +#define bfin_write_MXVR_INT_EN_0(val) bfin_write32(MXVR_INT_EN_0, val) +#define bfin_read_MXVR_INT_EN_1() bfin_read32(MXVR_INT_EN_1) +#define bfin_write_MXVR_INT_EN_1(val) bfin_write32(MXVR_INT_EN_1, val) +#define bfin_read_MXVR_POSITION() bfin_read16(MXVR_POSITION) +#define bfin_write_MXVR_POSITION(val) bfin_write16(MXVR_POSITION, val) +#define bfin_read_MXVR_MAX_POSITION() bfin_read16(MXVR_MAX_POSITION) +#define bfin_write_MXVR_MAX_POSITION(val) bfin_write16(MXVR_MAX_POSITION, val) +#define bfin_read_MXVR_DELAY() bfin_read16(MXVR_DELAY) +#define bfin_write_MXVR_DELAY(val) bfin_write16(MXVR_DELAY, val) +#define bfin_read_MXVR_MAX_DELAY() bfin_read16(MXVR_MAX_DELAY) +#define bfin_write_MXVR_MAX_DELAY(val) bfin_write16(MXVR_MAX_DELAY, val) +#define bfin_read_MXVR_LADDR() bfin_read32(MXVR_LADDR) +#define bfin_write_MXVR_LADDR(val) bfin_write32(MXVR_LADDR, val) +#define bfin_read_MXVR_GADDR() bfin_read16(MXVR_GADDR) +#define bfin_write_MXVR_GADDR(val) bfin_write16(MXVR_GADDR, val) +#define bfin_read_MXVR_AADDR() bfin_read32(MXVR_AADDR) +#define bfin_write_MXVR_AADDR(val) bfin_write32(MXVR_AADDR, val) + +/* MXVR Allocation Table Registers */ + +#define bfin_read_MXVR_ALLOC_0() bfin_read32(MXVR_ALLOC_0) +#define bfin_write_MXVR_ALLOC_0(val) bfin_write32(MXVR_ALLOC_0, val) +#define bfin_read_MXVR_ALLOC_1() bfin_read32(MXVR_ALLOC_1) +#define bfin_write_MXVR_ALLOC_1(val) bfin_write32(MXVR_ALLOC_1, val) +#define bfin_read_MXVR_ALLOC_2() bfin_read32(MXVR_ALLOC_2) +#define bfin_write_MXVR_ALLOC_2(val) bfin_write32(MXVR_ALLOC_2, val) +#define bfin_read_MXVR_ALLOC_3() bfin_read32(MXVR_ALLOC_3) +#define bfin_write_MXVR_ALLOC_3(val) bfin_write32(MXVR_ALLOC_3, val) +#define bfin_read_MXVR_ALLOC_4() bfin_read32(MXVR_ALLOC_4) +#define bfin_write_MXVR_ALLOC_4(val) bfin_write32(MXVR_ALLOC_4, val) +#define bfin_read_MXVR_ALLOC_5() bfin_read32(MXVR_ALLOC_5) +#define bfin_write_MXVR_ALLOC_5(val) bfin_write32(MXVR_ALLOC_5, val) +#define bfin_read_MXVR_ALLOC_6() bfin_read32(MXVR_ALLOC_6) +#define bfin_write_MXVR_ALLOC_6(val) bfin_write32(MXVR_ALLOC_6, val) +#define bfin_read_MXVR_ALLOC_7() bfin_read32(MXVR_ALLOC_7) +#define bfin_write_MXVR_ALLOC_7(val) bfin_write32(MXVR_ALLOC_7, val) +#define bfin_read_MXVR_ALLOC_8() bfin_read32(MXVR_ALLOC_8) +#define bfin_write_MXVR_ALLOC_8(val) bfin_write32(MXVR_ALLOC_8, val) +#define bfin_read_MXVR_ALLOC_9() bfin_read32(MXVR_ALLOC_9) +#define bfin_write_MXVR_ALLOC_9(val) bfin_write32(MXVR_ALLOC_9, val) +#define bfin_read_MXVR_ALLOC_10() bfin_read32(MXVR_ALLOC_10) +#define bfin_write_MXVR_ALLOC_10(val) bfin_write32(MXVR_ALLOC_10, val) +#define bfin_read_MXVR_ALLOC_11() bfin_read32(MXVR_ALLOC_11) +#define bfin_write_MXVR_ALLOC_11(val) bfin_write32(MXVR_ALLOC_11, val) +#define bfin_read_MXVR_ALLOC_12() bfin_read32(MXVR_ALLOC_12) +#define bfin_write_MXVR_ALLOC_12(val) bfin_write32(MXVR_ALLOC_12, val) +#define bfin_read_MXVR_ALLOC_13() bfin_read32(MXVR_ALLOC_13) +#define bfin_write_MXVR_ALLOC_13(val) bfin_write32(MXVR_ALLOC_13, val) +#define bfin_read_MXVR_ALLOC_14() bfin_read32(MXVR_ALLOC_14) +#define bfin_write_MXVR_ALLOC_14(val) bfin_write32(MXVR_ALLOC_14, val) + +/* MXVR Channel Assign Registers */ + +#define bfin_read_MXVR_SYNC_LCHAN_0() bfin_read32(MXVR_SYNC_LCHAN_0) +#define bfin_write_MXVR_SYNC_LCHAN_0(val) bfin_write32(MXVR_SYNC_LCHAN_0, val) +#define bfin_read_MXVR_SYNC_LCHAN_1() bfin_read32(MXVR_SYNC_LCHAN_1) +#define bfin_write_MXVR_SYNC_LCHAN_1(val) bfin_write32(MXVR_SYNC_LCHAN_1, val) +#define bfin_read_MXVR_SYNC_LCHAN_2() bfin_read32(MXVR_SYNC_LCHAN_2) +#define bfin_write_MXVR_SYNC_LCHAN_2(val) bfin_write32(MXVR_SYNC_LCHAN_2, val) +#define bfin_read_MXVR_SYNC_LCHAN_3() bfin_read32(MXVR_SYNC_LCHAN_3) +#define bfin_write_MXVR_SYNC_LCHAN_3(val) bfin_write32(MXVR_SYNC_LCHAN_3, val) +#define bfin_read_MXVR_SYNC_LCHAN_4() bfin_read32(MXVR_SYNC_LCHAN_4) +#define bfin_write_MXVR_SYNC_LCHAN_4(val) bfin_write32(MXVR_SYNC_LCHAN_4, val) +#define bfin_read_MXVR_SYNC_LCHAN_5() bfin_read32(MXVR_SYNC_LCHAN_5) +#define bfin_write_MXVR_SYNC_LCHAN_5(val) bfin_write32(MXVR_SYNC_LCHAN_5, val) +#define bfin_read_MXVR_SYNC_LCHAN_6() bfin_read32(MXVR_SYNC_LCHAN_6) +#define bfin_write_MXVR_SYNC_LCHAN_6(val) bfin_write32(MXVR_SYNC_LCHAN_6, val) +#define bfin_read_MXVR_SYNC_LCHAN_7() bfin_read32(MXVR_SYNC_LCHAN_7) +#define bfin_write_MXVR_SYNC_LCHAN_7(val) bfin_write32(MXVR_SYNC_LCHAN_7, val) + +/* MXVR DMA0 Registers */ + +#define bfin_read_MXVR_DMA0_CONFIG() bfin_read32(MXVR_DMA0_CONFIG) +#define bfin_write_MXVR_DMA0_CONFIG(val) bfin_write32(MXVR_DMA0_CONFIG, val) +#define bfin_read_MXVR_DMA0_START_ADDR() bfin_read32(MXVR_DMA0_START_ADDR) +#define bfin_write_MXVR_DMA0_START_ADDR(val) bfin_write32(MXVR_DMA0_START_ADDR) +#define bfin_read_MXVR_DMA0_COUNT() bfin_read16(MXVR_DMA0_COUNT) +#define bfin_write_MXVR_DMA0_COUNT(val) bfin_write16(MXVR_DMA0_COUNT, val) +#define bfin_read_MXVR_DMA0_CURR_ADDR() bfin_read32(MXVR_DMA0_CURR_ADDR) +#define bfin_write_MXVR_DMA0_CURR_ADDR(val) bfin_write32(MXVR_DMA0_CURR_ADDR) +#define bfin_read_MXVR_DMA0_CURR_COUNT() bfin_read16(MXVR_DMA0_CURR_COUNT) +#define bfin_write_MXVR_DMA0_CURR_COUNT(val) bfin_write16(MXVR_DMA0_CURR_COUNT, val) + +/* MXVR DMA1 Registers */ + +#define bfin_read_MXVR_DMA1_CONFIG() bfin_read32(MXVR_DMA1_CONFIG) +#define bfin_write_MXVR_DMA1_CONFIG(val) bfin_write32(MXVR_DMA1_CONFIG, val) +#define bfin_read_MXVR_DMA1_START_ADDR() bfin_read32(MXVR_DMA1_START_ADDR) +#define bfin_write_MXVR_DMA1_START_ADDR(val) bfin_write32(MXVR_DMA1_START_ADDR) +#define bfin_read_MXVR_DMA1_COUNT() bfin_read16(MXVR_DMA1_COUNT) +#define bfin_write_MXVR_DMA1_COUNT(val) bfin_write16(MXVR_DMA1_COUNT, val) +#define bfin_read_MXVR_DMA1_CURR_ADDR() bfin_read32(MXVR_DMA1_CURR_ADDR) +#define bfin_write_MXVR_DMA1_CURR_ADDR(val) bfin_write32(MXVR_DMA1_CURR_ADDR) +#define bfin_read_MXVR_DMA1_CURR_COUNT() bfin_read16(MXVR_DMA1_CURR_COUNT) +#define bfin_write_MXVR_DMA1_CURR_COUNT(val) bfin_write16(MXVR_DMA1_CURR_COUNT, val) + +/* MXVR DMA2 Registers */ + +#define bfin_read_MXVR_DMA2_CONFIG() bfin_read32(MXVR_DMA2_CONFIG) +#define bfin_write_MXVR_DMA2_CONFIG(val) bfin_write32(MXVR_DMA2_CONFIG, val) +#define bfin_read_MXVR_DMA2_START_ADDR() bfin_read32(MXVR_DMA2_START_ADDR) +#define bfin_write_MXVR_DMA2_START_ADDR(val) bfin_write32(MXVR_DMA2_START_ADDR) +#define bfin_read_MXVR_DMA2_COUNT() bfin_read16(MXVR_DMA2_COUNT) +#define bfin_write_MXVR_DMA2_COUNT(val) bfin_write16(MXVR_DMA2_COUNT, val) +#define bfin_read_MXVR_DMA2_CURR_ADDR() bfin_read32(MXVR_DMA2_CURR_ADDR) +#define bfin_write_MXVR_DMA2_CURR_ADDR(val) bfin_write32(MXVR_DMA2_CURR_ADDR) +#define bfin_read_MXVR_DMA2_CURR_COUNT() bfin_read16(MXVR_DMA2_CURR_COUNT) +#define bfin_write_MXVR_DMA2_CURR_COUNT(val) bfin_write16(MXVR_DMA2_CURR_COUNT, val) + +/* MXVR DMA3 Registers */ + +#define bfin_read_MXVR_DMA3_CONFIG() bfin_read32(MXVR_DMA3_CONFIG) +#define bfin_write_MXVR_DMA3_CONFIG(val) bfin_write32(MXVR_DMA3_CONFIG, val) +#define bfin_read_MXVR_DMA3_START_ADDR() bfin_read32(MXVR_DMA3_START_ADDR) +#define bfin_write_MXVR_DMA3_START_ADDR(val) bfin_write32(MXVR_DMA3_START_ADDR) +#define bfin_read_MXVR_DMA3_COUNT() bfin_read16(MXVR_DMA3_COUNT) +#define bfin_write_MXVR_DMA3_COUNT(val) bfin_write16(MXVR_DMA3_COUNT, val) +#define bfin_read_MXVR_DMA3_CURR_ADDR() bfin_read32(MXVR_DMA3_CURR_ADDR) +#define bfin_write_MXVR_DMA3_CURR_ADDR(val) bfin_write32(MXVR_DMA3_CURR_ADDR) +#define bfin_read_MXVR_DMA3_CURR_COUNT() bfin_read16(MXVR_DMA3_CURR_COUNT) +#define bfin_write_MXVR_DMA3_CURR_COUNT(val) bfin_write16(MXVR_DMA3_CURR_COUNT, val) + +/* MXVR DMA4 Registers */ + +#define bfin_read_MXVR_DMA4_CONFIG() bfin_read32(MXVR_DMA4_CONFIG) +#define bfin_write_MXVR_DMA4_CONFIG(val) bfin_write32(MXVR_DMA4_CONFIG, val) +#define bfin_read_MXVR_DMA4_START_ADDR() bfin_read32(MXVR_DMA4_START_ADDR) +#define bfin_write_MXVR_DMA4_START_ADDR(val) bfin_write32(MXVR_DMA4_START_ADDR) +#define bfin_read_MXVR_DMA4_COUNT() bfin_read16(MXVR_DMA4_COUNT) +#define bfin_write_MXVR_DMA4_COUNT(val) bfin_write16(MXVR_DMA4_COUNT, val) +#define bfin_read_MXVR_DMA4_CURR_ADDR() bfin_read32(MXVR_DMA4_CURR_ADDR) +#define bfin_write_MXVR_DMA4_CURR_ADDR(val) bfin_write32(MXVR_DMA4_CURR_ADDR) +#define bfin_read_MXVR_DMA4_CURR_COUNT() bfin_read16(MXVR_DMA4_CURR_COUNT) +#define bfin_write_MXVR_DMA4_CURR_COUNT(val) bfin_write16(MXVR_DMA4_CURR_COUNT, val) + +/* MXVR DMA5 Registers */ + +#define bfin_read_MXVR_DMA5_CONFIG() bfin_read32(MXVR_DMA5_CONFIG) +#define bfin_write_MXVR_DMA5_CONFIG(val) bfin_write32(MXVR_DMA5_CONFIG, val) +#define bfin_read_MXVR_DMA5_START_ADDR() bfin_read32(MXVR_DMA5_START_ADDR) +#define bfin_write_MXVR_DMA5_START_ADDR(val) bfin_write32(MXVR_DMA5_START_ADDR) +#define bfin_read_MXVR_DMA5_COUNT() bfin_read16(MXVR_DMA5_COUNT) +#define bfin_write_MXVR_DMA5_COUNT(val) bfin_write16(MXVR_DMA5_COUNT, val) +#define bfin_read_MXVR_DMA5_CURR_ADDR() bfin_read32(MXVR_DMA5_CURR_ADDR) +#define bfin_write_MXVR_DMA5_CURR_ADDR(val) bfin_write32(MXVR_DMA5_CURR_ADDR) +#define bfin_read_MXVR_DMA5_CURR_COUNT() bfin_read16(MXVR_DMA5_CURR_COUNT) +#define bfin_write_MXVR_DMA5_CURR_COUNT(val) bfin_write16(MXVR_DMA5_CURR_COUNT, val) + +/* MXVR DMA6 Registers */ + +#define bfin_read_MXVR_DMA6_CONFIG() bfin_read32(MXVR_DMA6_CONFIG) +#define bfin_write_MXVR_DMA6_CONFIG(val) bfin_write32(MXVR_DMA6_CONFIG, val) +#define bfin_read_MXVR_DMA6_START_ADDR() bfin_read32(MXVR_DMA6_START_ADDR) +#define bfin_write_MXVR_DMA6_START_ADDR(val) bfin_write32(MXVR_DMA6_START_ADDR) +#define bfin_read_MXVR_DMA6_COUNT() bfin_read16(MXVR_DMA6_COUNT) +#define bfin_write_MXVR_DMA6_COUNT(val) bfin_write16(MXVR_DMA6_COUNT, val) +#define bfin_read_MXVR_DMA6_CURR_ADDR() bfin_read32(MXVR_DMA6_CURR_ADDR) +#define bfin_write_MXVR_DMA6_CURR_ADDR(val) bfin_write32(MXVR_DMA6_CURR_ADDR) +#define bfin_read_MXVR_DMA6_CURR_COUNT() bfin_read16(MXVR_DMA6_CURR_COUNT) +#define bfin_write_MXVR_DMA6_CURR_COUNT(val) bfin_write16(MXVR_DMA6_CURR_COUNT, val) + +/* MXVR DMA7 Registers */ + +#define bfin_read_MXVR_DMA7_CONFIG() bfin_read32(MXVR_DMA7_CONFIG) +#define bfin_write_MXVR_DMA7_CONFIG(val) bfin_write32(MXVR_DMA7_CONFIG, val) +#define bfin_read_MXVR_DMA7_START_ADDR() bfin_read32(MXVR_DMA7_START_ADDR) +#define bfin_write_MXVR_DMA7_START_ADDR(val) bfin_write32(MXVR_DMA7_START_ADDR) +#define bfin_read_MXVR_DMA7_COUNT() bfin_read16(MXVR_DMA7_COUNT) +#define bfin_write_MXVR_DMA7_COUNT(val) bfin_write16(MXVR_DMA7_COUNT, val) +#define bfin_read_MXVR_DMA7_CURR_ADDR() bfin_read32(MXVR_DMA7_CURR_ADDR) +#define bfin_write_MXVR_DMA7_CURR_ADDR(val) bfin_write32(MXVR_DMA7_CURR_ADDR) +#define bfin_read_MXVR_DMA7_CURR_COUNT() bfin_read16(MXVR_DMA7_CURR_COUNT) +#define bfin_write_MXVR_DMA7_CURR_COUNT(val) bfin_write16(MXVR_DMA7_CURR_COUNT, val) + +/* MXVR Asynch Packet Registers */ + +#define bfin_read_MXVR_AP_CTL() bfin_read16(MXVR_AP_CTL) +#define bfin_write_MXVR_AP_CTL(val) bfin_write16(MXVR_AP_CTL, val) +#define bfin_read_MXVR_APRB_START_ADDR() bfin_read32(MXVR_APRB_START_ADDR) +#define bfin_write_MXVR_APRB_START_ADDR(val) bfin_write32(MXVR_APRB_START_ADDR) +#define bfin_read_MXVR_APRB_CURR_ADDR() bfin_read32(MXVR_APRB_CURR_ADDR) +#define bfin_write_MXVR_APRB_CURR_ADDR(val) bfin_write32(MXVR_APRB_CURR_ADDR) +#define bfin_read_MXVR_APTB_START_ADDR() bfin_read32(MXVR_APTB_START_ADDR) +#define bfin_write_MXVR_APTB_START_ADDR(val) bfin_write32(MXVR_APTB_START_ADDR) +#define bfin_read_MXVR_APTB_CURR_ADDR() bfin_read32(MXVR_APTB_CURR_ADDR) +#define bfin_write_MXVR_APTB_CURR_ADDR(val) bfin_write32(MXVR_APTB_CURR_ADDR) + +/* MXVR Control Message Registers */ + +#define bfin_read_MXVR_CM_CTL() bfin_read32(MXVR_CM_CTL) +#define bfin_write_MXVR_CM_CTL(val) bfin_write32(MXVR_CM_CTL, val) +#define bfin_read_MXVR_CMRB_START_ADDR() bfin_read32(MXVR_CMRB_START_ADDR) +#define bfin_write_MXVR_CMRB_START_ADDR(val) bfin_write32(MXVR_CMRB_START_ADDR) +#define bfin_read_MXVR_CMRB_CURR_ADDR() bfin_read32(MXVR_CMRB_CURR_ADDR) +#define bfin_write_MXVR_CMRB_CURR_ADDR(val) bfin_write32(MXVR_CMRB_CURR_ADDR) +#define bfin_read_MXVR_CMTB_START_ADDR() bfin_read32(MXVR_CMTB_START_ADDR) +#define bfin_write_MXVR_CMTB_START_ADDR(val) bfin_write32(MXVR_CMTB_START_ADDR) +#define bfin_read_MXVR_CMTB_CURR_ADDR() bfin_read32(MXVR_CMTB_CURR_ADDR) +#define bfin_write_MXVR_CMTB_CURR_ADDR(val) bfin_write32(MXVR_CMTB_CURR_ADDR) + +/* MXVR Remote Read Registers */ + +#define bfin_read_MXVR_RRDB_START_ADDR() bfin_read32(MXVR_RRDB_START_ADDR) +#define bfin_write_MXVR_RRDB_START_ADDR(val) bfin_write32(MXVR_RRDB_START_ADDR) +#define bfin_read_MXVR_RRDB_CURR_ADDR() bfin_read32(MXVR_RRDB_CURR_ADDR) +#define bfin_write_MXVR_RRDB_CURR_ADDR(val) bfin_write32(MXVR_RRDB_CURR_ADDR) + +/* MXVR Pattern Data Registers */ + +#define bfin_read_MXVR_PAT_DATA_0() bfin_read32(MXVR_PAT_DATA_0) +#define bfin_write_MXVR_PAT_DATA_0(val) bfin_write32(MXVR_PAT_DATA_0, val) +#define bfin_read_MXVR_PAT_EN_0() bfin_read32(MXVR_PAT_EN_0) +#define bfin_write_MXVR_PAT_EN_0(val) bfin_write32(MXVR_PAT_EN_0, val) +#define bfin_read_MXVR_PAT_DATA_1() bfin_read32(MXVR_PAT_DATA_1) +#define bfin_write_MXVR_PAT_DATA_1(val) bfin_write32(MXVR_PAT_DATA_1, val) +#define bfin_read_MXVR_PAT_EN_1() bfin_read32(MXVR_PAT_EN_1) +#define bfin_write_MXVR_PAT_EN_1(val) bfin_write32(MXVR_PAT_EN_1, val) + +/* MXVR Frame Counter Registers */ + +#define bfin_read_MXVR_FRAME_CNT_0() bfin_read16(MXVR_FRAME_CNT_0) +#define bfin_write_MXVR_FRAME_CNT_0(val) bfin_write16(MXVR_FRAME_CNT_0, val) +#define bfin_read_MXVR_FRAME_CNT_1() bfin_read16(MXVR_FRAME_CNT_1) +#define bfin_write_MXVR_FRAME_CNT_1(val) bfin_write16(MXVR_FRAME_CNT_1, val) + +/* MXVR Routing Table Registers */ + +#define bfin_read_MXVR_ROUTING_0() bfin_read32(MXVR_ROUTING_0) +#define bfin_write_MXVR_ROUTING_0(val) bfin_write32(MXVR_ROUTING_0, val) +#define bfin_read_MXVR_ROUTING_1() bfin_read32(MXVR_ROUTING_1) +#define bfin_write_MXVR_ROUTING_1(val) bfin_write32(MXVR_ROUTING_1, val) +#define bfin_read_MXVR_ROUTING_2() bfin_read32(MXVR_ROUTING_2) +#define bfin_write_MXVR_ROUTING_2(val) bfin_write32(MXVR_ROUTING_2, val) +#define bfin_read_MXVR_ROUTING_3() bfin_read32(MXVR_ROUTING_3) +#define bfin_write_MXVR_ROUTING_3(val) bfin_write32(MXVR_ROUTING_3, val) +#define bfin_read_MXVR_ROUTING_4() bfin_read32(MXVR_ROUTING_4) +#define bfin_write_MXVR_ROUTING_4(val) bfin_write32(MXVR_ROUTING_4, val) +#define bfin_read_MXVR_ROUTING_5() bfin_read32(MXVR_ROUTING_5) +#define bfin_write_MXVR_ROUTING_5(val) bfin_write32(MXVR_ROUTING_5, val) +#define bfin_read_MXVR_ROUTING_6() bfin_read32(MXVR_ROUTING_6) +#define bfin_write_MXVR_ROUTING_6(val) bfin_write32(MXVR_ROUTING_6, val) +#define bfin_read_MXVR_ROUTING_7() bfin_read32(MXVR_ROUTING_7) +#define bfin_write_MXVR_ROUTING_7(val) bfin_write32(MXVR_ROUTING_7, val) +#define bfin_read_MXVR_ROUTING_8() bfin_read32(MXVR_ROUTING_8) +#define bfin_write_MXVR_ROUTING_8(val) bfin_write32(MXVR_ROUTING_8, val) +#define bfin_read_MXVR_ROUTING_9() bfin_read32(MXVR_ROUTING_9) +#define bfin_write_MXVR_ROUTING_9(val) bfin_write32(MXVR_ROUTING_9, val) +#define bfin_read_MXVR_ROUTING_10() bfin_read32(MXVR_ROUTING_10) +#define bfin_write_MXVR_ROUTING_10(val) bfin_write32(MXVR_ROUTING_10, val) +#define bfin_read_MXVR_ROUTING_11() bfin_read32(MXVR_ROUTING_11) +#define bfin_write_MXVR_ROUTING_11(val) bfin_write32(MXVR_ROUTING_11, val) +#define bfin_read_MXVR_ROUTING_12() bfin_read32(MXVR_ROUTING_12) +#define bfin_write_MXVR_ROUTING_12(val) bfin_write32(MXVR_ROUTING_12, val) +#define bfin_read_MXVR_ROUTING_13() bfin_read32(MXVR_ROUTING_13) +#define bfin_write_MXVR_ROUTING_13(val) bfin_write32(MXVR_ROUTING_13, val) +#define bfin_read_MXVR_ROUTING_14() bfin_read32(MXVR_ROUTING_14) +#define bfin_write_MXVR_ROUTING_14(val) bfin_write32(MXVR_ROUTING_14, val) + +/* MXVR Counter-Clock-Control Registers */ + +#define bfin_read_MXVR_BLOCK_CNT() bfin_read16(MXVR_BLOCK_CNT) +#define bfin_write_MXVR_BLOCK_CNT(val) bfin_write16(MXVR_BLOCK_CNT, val) +#define bfin_read_MXVR_CLK_CTL() bfin_read32(MXVR_CLK_CTL) +#define bfin_write_MXVR_CLK_CTL(val) bfin_write32(MXVR_CLK_CTL, val) +#define bfin_read_MXVR_CDRPLL_CTL() bfin_read32(MXVR_CDRPLL_CTL) +#define bfin_write_MXVR_CDRPLL_CTL(val) bfin_write32(MXVR_CDRPLL_CTL, val) +#define bfin_read_MXVR_FMPLL_CTL() bfin_read32(MXVR_FMPLL_CTL) +#define bfin_write_MXVR_FMPLL_CTL(val) bfin_write32(MXVR_FMPLL_CTL, val) +#define bfin_read_MXVR_PIN_CTL() bfin_read16(MXVR_PIN_CTL) +#define bfin_write_MXVR_PIN_CTL(val) bfin_write16(MXVR_PIN_CTL, val) +#define bfin_read_MXVR_SCLK_CNT() bfin_read16(MXVR_SCLK_CNT) +#define bfin_write_MXVR_SCLK_CNT(val) bfin_write16(MXVR_SCLK_CNT, val) + +/* CAN Controller 1 Config 1 Registers */ + +#define bfin_read_CAN1_MC1() bfin_read16(CAN1_MC1) +#define bfin_write_CAN1_MC1(val) bfin_write16(CAN1_MC1, val) +#define bfin_read_CAN1_MD1() bfin_read16(CAN1_MD1) +#define bfin_write_CAN1_MD1(val) bfin_write16(CAN1_MD1, val) +#define bfin_read_CAN1_TRS1() bfin_read16(CAN1_TRS1) +#define bfin_write_CAN1_TRS1(val) bfin_write16(CAN1_TRS1, val) +#define bfin_read_CAN1_TRR1() bfin_read16(CAN1_TRR1) +#define bfin_write_CAN1_TRR1(val) bfin_write16(CAN1_TRR1, val) +#define bfin_read_CAN1_TA1() bfin_read16(CAN1_TA1) +#define bfin_write_CAN1_TA1(val) bfin_write16(CAN1_TA1, val) +#define bfin_read_CAN1_AA1() bfin_read16(CAN1_AA1) +#define bfin_write_CAN1_AA1(val) bfin_write16(CAN1_AA1, val) +#define bfin_read_CAN1_RMP1() bfin_read16(CAN1_RMP1) +#define bfin_write_CAN1_RMP1(val) bfin_write16(CAN1_RMP1, val) +#define bfin_read_CAN1_RML1() bfin_read16(CAN1_RML1) +#define bfin_write_CAN1_RML1(val) bfin_write16(CAN1_RML1, val) +#define bfin_read_CAN1_MBTIF1() bfin_read16(CAN1_MBTIF1) +#define bfin_write_CAN1_MBTIF1(val) bfin_write16(CAN1_MBTIF1, val) +#define bfin_read_CAN1_MBRIF1() bfin_read16(CAN1_MBRIF1) +#define bfin_write_CAN1_MBRIF1(val) bfin_write16(CAN1_MBRIF1, val) +#define bfin_read_CAN1_MBIM1() bfin_read16(CAN1_MBIM1) +#define bfin_write_CAN1_MBIM1(val) bfin_write16(CAN1_MBIM1, val) +#define bfin_read_CAN1_RFH1() bfin_read16(CAN1_RFH1) +#define bfin_write_CAN1_RFH1(val) bfin_write16(CAN1_RFH1, val) +#define bfin_read_CAN1_OPSS1() bfin_read16(CAN1_OPSS1) +#define bfin_write_CAN1_OPSS1(val) bfin_write16(CAN1_OPSS1, val) + +/* CAN Controller 1 Config 2 Registers */ + +#define bfin_read_CAN1_MC2() bfin_read16(CAN1_MC2) +#define bfin_write_CAN1_MC2(val) bfin_write16(CAN1_MC2, val) +#define bfin_read_CAN1_MD2() bfin_read16(CAN1_MD2) +#define bfin_write_CAN1_MD2(val) bfin_write16(CAN1_MD2, val) +#define bfin_read_CAN1_TRS2() bfin_read16(CAN1_TRS2) +#define bfin_write_CAN1_TRS2(val) bfin_write16(CAN1_TRS2, val) +#define bfin_read_CAN1_TRR2() bfin_read16(CAN1_TRR2) +#define bfin_write_CAN1_TRR2(val) bfin_write16(CAN1_TRR2, val) +#define bfin_read_CAN1_TA2() bfin_read16(CAN1_TA2) +#define bfin_write_CAN1_TA2(val) bfin_write16(CAN1_TA2, val) +#define bfin_read_CAN1_AA2() bfin_read16(CAN1_AA2) +#define bfin_write_CAN1_AA2(val) bfin_write16(CAN1_AA2, val) +#define bfin_read_CAN1_RMP2() bfin_read16(CAN1_RMP2) +#define bfin_write_CAN1_RMP2(val) bfin_write16(CAN1_RMP2, val) +#define bfin_read_CAN1_RML2() bfin_read16(CAN1_RML2) +#define bfin_write_CAN1_RML2(val) bfin_write16(CAN1_RML2, val) +#define bfin_read_CAN1_MBTIF2() bfin_read16(CAN1_MBTIF2) +#define bfin_write_CAN1_MBTIF2(val) bfin_write16(CAN1_MBTIF2, val) +#define bfin_read_CAN1_MBRIF2() bfin_read16(CAN1_MBRIF2) +#define bfin_write_CAN1_MBRIF2(val) bfin_write16(CAN1_MBRIF2, val) +#define bfin_read_CAN1_MBIM2() bfin_read16(CAN1_MBIM2) +#define bfin_write_CAN1_MBIM2(val) bfin_write16(CAN1_MBIM2, val) +#define bfin_read_CAN1_RFH2() bfin_read16(CAN1_RFH2) +#define bfin_write_CAN1_RFH2(val) bfin_write16(CAN1_RFH2, val) +#define bfin_read_CAN1_OPSS2() bfin_read16(CAN1_OPSS2) +#define bfin_write_CAN1_OPSS2(val) bfin_write16(CAN1_OPSS2, val) + +/* CAN Controller 1 Clock/Interrubfin_read_()t/Counter Registers */ + +#define bfin_read_CAN1_CLOCK() bfin_read16(CAN1_CLOCK) +#define bfin_write_CAN1_CLOCK(val) bfin_write16(CAN1_CLOCK, val) +#define bfin_read_CAN1_TIMING() bfin_read16(CAN1_TIMING) +#define bfin_write_CAN1_TIMING(val) bfin_write16(CAN1_TIMING, val) +#define bfin_read_CAN1_DEBUG() bfin_read16(CAN1_DEBUG) +#define bfin_write_CAN1_DEBUG(val) bfin_write16(CAN1_DEBUG, val) +#define bfin_read_CAN1_STATUS() bfin_read16(CAN1_STATUS) +#define bfin_write_CAN1_STATUS(val) bfin_write16(CAN1_STATUS, val) +#define bfin_read_CAN1_CEC() bfin_read16(CAN1_CEC) +#define bfin_write_CAN1_CEC(val) bfin_write16(CAN1_CEC, val) +#define bfin_read_CAN1_GIS() bfin_read16(CAN1_GIS) +#define bfin_write_CAN1_GIS(val) bfin_write16(CAN1_GIS, val) +#define bfin_read_CAN1_GIM() bfin_read16(CAN1_GIM) +#define bfin_write_CAN1_GIM(val) bfin_write16(CAN1_GIM, val) +#define bfin_read_CAN1_GIF() bfin_read16(CAN1_GIF) +#define bfin_write_CAN1_GIF(val) bfin_write16(CAN1_GIF, val) +#define bfin_read_CAN1_CONTROL() bfin_read16(CAN1_CONTROL) +#define bfin_write_CAN1_CONTROL(val) bfin_write16(CAN1_CONTROL, val) +#define bfin_read_CAN1_INTR() bfin_read16(CAN1_INTR) +#define bfin_write_CAN1_INTR(val) bfin_write16(CAN1_INTR, val) +#define bfin_read_CAN1_MBTD() bfin_read16(CAN1_MBTD) +#define bfin_write_CAN1_MBTD(val) bfin_write16(CAN1_MBTD, val) +#define bfin_read_CAN1_EWR() bfin_read16(CAN1_EWR) +#define bfin_write_CAN1_EWR(val) bfin_write16(CAN1_EWR, val) +#define bfin_read_CAN1_ESR() bfin_read16(CAN1_ESR) +#define bfin_write_CAN1_ESR(val) bfin_write16(CAN1_ESR, val) +#define bfin_read_CAN1_UCCNT() bfin_read16(CAN1_UCCNT) +#define bfin_write_CAN1_UCCNT(val) bfin_write16(CAN1_UCCNT, val) +#define bfin_read_CAN1_UCRC() bfin_read16(CAN1_UCRC) +#define bfin_write_CAN1_UCRC(val) bfin_write16(CAN1_UCRC, val) +#define bfin_read_CAN1_UCCNF() bfin_read16(CAN1_UCCNF) +#define bfin_write_CAN1_UCCNF(val) bfin_write16(CAN1_UCCNF, val) + +/* CAN Controller 1 Mailbox Accebfin_read_()tance Registers */ + +#define bfin_read_CAN1_AM00L() bfin_read16(CAN1_AM00L) +#define bfin_write_CAN1_AM00L(val) bfin_write16(CAN1_AM00L, val) +#define bfin_read_CAN1_AM00H() bfin_read16(CAN1_AM00H) +#define bfin_write_CAN1_AM00H(val) bfin_write16(CAN1_AM00H, val) +#define bfin_read_CAN1_AM01L() bfin_read16(CAN1_AM01L) +#define bfin_write_CAN1_AM01L(val) bfin_write16(CAN1_AM01L, val) +#define bfin_read_CAN1_AM01H() bfin_read16(CAN1_AM01H) +#define bfin_write_CAN1_AM01H(val) bfin_write16(CAN1_AM01H, val) +#define bfin_read_CAN1_AM02L() bfin_read16(CAN1_AM02L) +#define bfin_write_CAN1_AM02L(val) bfin_write16(CAN1_AM02L, val) +#define bfin_read_CAN1_AM02H() bfin_read16(CAN1_AM02H) +#define bfin_write_CAN1_AM02H(val) bfin_write16(CAN1_AM02H, val) +#define bfin_read_CAN1_AM03L() bfin_read16(CAN1_AM03L) +#define bfin_write_CAN1_AM03L(val) bfin_write16(CAN1_AM03L, val) +#define bfin_read_CAN1_AM03H() bfin_read16(CAN1_AM03H) +#define bfin_write_CAN1_AM03H(val) bfin_write16(CAN1_AM03H, val) +#define bfin_read_CAN1_AM04L() bfin_read16(CAN1_AM04L) +#define bfin_write_CAN1_AM04L(val) bfin_write16(CAN1_AM04L, val) +#define bfin_read_CAN1_AM04H() bfin_read16(CAN1_AM04H) +#define bfin_write_CAN1_AM04H(val) bfin_write16(CAN1_AM04H, val) +#define bfin_read_CAN1_AM05L() bfin_read16(CAN1_AM05L) +#define bfin_write_CAN1_AM05L(val) bfin_write16(CAN1_AM05L, val) +#define bfin_read_CAN1_AM05H() bfin_read16(CAN1_AM05H) +#define bfin_write_CAN1_AM05H(val) bfin_write16(CAN1_AM05H, val) +#define bfin_read_CAN1_AM06L() bfin_read16(CAN1_AM06L) +#define bfin_write_CAN1_AM06L(val) bfin_write16(CAN1_AM06L, val) +#define bfin_read_CAN1_AM06H() bfin_read16(CAN1_AM06H) +#define bfin_write_CAN1_AM06H(val) bfin_write16(CAN1_AM06H, val) +#define bfin_read_CAN1_AM07L() bfin_read16(CAN1_AM07L) +#define bfin_write_CAN1_AM07L(val) bfin_write16(CAN1_AM07L, val) +#define bfin_read_CAN1_AM07H() bfin_read16(CAN1_AM07H) +#define bfin_write_CAN1_AM07H(val) bfin_write16(CAN1_AM07H, val) +#define bfin_read_CAN1_AM08L() bfin_read16(CAN1_AM08L) +#define bfin_write_CAN1_AM08L(val) bfin_write16(CAN1_AM08L, val) +#define bfin_read_CAN1_AM08H() bfin_read16(CAN1_AM08H) +#define bfin_write_CAN1_AM08H(val) bfin_write16(CAN1_AM08H, val) +#define bfin_read_CAN1_AM09L() bfin_read16(CAN1_AM09L) +#define bfin_write_CAN1_AM09L(val) bfin_write16(CAN1_AM09L, val) +#define bfin_read_CAN1_AM09H() bfin_read16(CAN1_AM09H) +#define bfin_write_CAN1_AM09H(val) bfin_write16(CAN1_AM09H, val) +#define bfin_read_CAN1_AM10L() bfin_read16(CAN1_AM10L) +#define bfin_write_CAN1_AM10L(val) bfin_write16(CAN1_AM10L, val) +#define bfin_read_CAN1_AM10H() bfin_read16(CAN1_AM10H) +#define bfin_write_CAN1_AM10H(val) bfin_write16(CAN1_AM10H, val) +#define bfin_read_CAN1_AM11L() bfin_read16(CAN1_AM11L) +#define bfin_write_CAN1_AM11L(val) bfin_write16(CAN1_AM11L, val) +#define bfin_read_CAN1_AM11H() bfin_read16(CAN1_AM11H) +#define bfin_write_CAN1_AM11H(val) bfin_write16(CAN1_AM11H, val) +#define bfin_read_CAN1_AM12L() bfin_read16(CAN1_AM12L) +#define bfin_write_CAN1_AM12L(val) bfin_write16(CAN1_AM12L, val) +#define bfin_read_CAN1_AM12H() bfin_read16(CAN1_AM12H) +#define bfin_write_CAN1_AM12H(val) bfin_write16(CAN1_AM12H, val) +#define bfin_read_CAN1_AM13L() bfin_read16(CAN1_AM13L) +#define bfin_write_CAN1_AM13L(val) bfin_write16(CAN1_AM13L, val) +#define bfin_read_CAN1_AM13H() bfin_read16(CAN1_AM13H) +#define bfin_write_CAN1_AM13H(val) bfin_write16(CAN1_AM13H, val) +#define bfin_read_CAN1_AM14L() bfin_read16(CAN1_AM14L) +#define bfin_write_CAN1_AM14L(val) bfin_write16(CAN1_AM14L, val) +#define bfin_read_CAN1_AM14H() bfin_read16(CAN1_AM14H) +#define bfin_write_CAN1_AM14H(val) bfin_write16(CAN1_AM14H, val) +#define bfin_read_CAN1_AM15L() bfin_read16(CAN1_AM15L) +#define bfin_write_CAN1_AM15L(val) bfin_write16(CAN1_AM15L, val) +#define bfin_read_CAN1_AM15H() bfin_read16(CAN1_AM15H) +#define bfin_write_CAN1_AM15H(val) bfin_write16(CAN1_AM15H, val) + +/* CAN Controller 1 Mailbox Accebfin_read_()tance Registers */ + +#define bfin_read_CAN1_AM16L() bfin_read16(CAN1_AM16L) +#define bfin_write_CAN1_AM16L(val) bfin_write16(CAN1_AM16L, val) +#define bfin_read_CAN1_AM16H() bfin_read16(CAN1_AM16H) +#define bfin_write_CAN1_AM16H(val) bfin_write16(CAN1_AM16H, val) +#define bfin_read_CAN1_AM17L() bfin_read16(CAN1_AM17L) +#define bfin_write_CAN1_AM17L(val) bfin_write16(CAN1_AM17L, val) +#define bfin_read_CAN1_AM17H() bfin_read16(CAN1_AM17H) +#define bfin_write_CAN1_AM17H(val) bfin_write16(CAN1_AM17H, val) +#define bfin_read_CAN1_AM18L() bfin_read16(CAN1_AM18L) +#define bfin_write_CAN1_AM18L(val) bfin_write16(CAN1_AM18L, val) +#define bfin_read_CAN1_AM18H() bfin_read16(CAN1_AM18H) +#define bfin_write_CAN1_AM18H(val) bfin_write16(CAN1_AM18H, val) +#define bfin_read_CAN1_AM19L() bfin_read16(CAN1_AM19L) +#define bfin_write_CAN1_AM19L(val) bfin_write16(CAN1_AM19L, val) +#define bfin_read_CAN1_AM19H() bfin_read16(CAN1_AM19H) +#define bfin_write_CAN1_AM19H(val) bfin_write16(CAN1_AM19H, val) +#define bfin_read_CAN1_AM20L() bfin_read16(CAN1_AM20L) +#define bfin_write_CAN1_AM20L(val) bfin_write16(CAN1_AM20L, val) +#define bfin_read_CAN1_AM20H() bfin_read16(CAN1_AM20H) +#define bfin_write_CAN1_AM20H(val) bfin_write16(CAN1_AM20H, val) +#define bfin_read_CAN1_AM21L() bfin_read16(CAN1_AM21L) +#define bfin_write_CAN1_AM21L(val) bfin_write16(CAN1_AM21L, val) +#define bfin_read_CAN1_AM21H() bfin_read16(CAN1_AM21H) +#define bfin_write_CAN1_AM21H(val) bfin_write16(CAN1_AM21H, val) +#define bfin_read_CAN1_AM22L() bfin_read16(CAN1_AM22L) +#define bfin_write_CAN1_AM22L(val) bfin_write16(CAN1_AM22L, val) +#define bfin_read_CAN1_AM22H() bfin_read16(CAN1_AM22H) +#define bfin_write_CAN1_AM22H(val) bfin_write16(CAN1_AM22H, val) +#define bfin_read_CAN1_AM23L() bfin_read16(CAN1_AM23L) +#define bfin_write_CAN1_AM23L(val) bfin_write16(CAN1_AM23L, val) +#define bfin_read_CAN1_AM23H() bfin_read16(CAN1_AM23H) +#define bfin_write_CAN1_AM23H(val) bfin_write16(CAN1_AM23H, val) +#define bfin_read_CAN1_AM24L() bfin_read16(CAN1_AM24L) +#define bfin_write_CAN1_AM24L(val) bfin_write16(CAN1_AM24L, val) +#define bfin_read_CAN1_AM24H() bfin_read16(CAN1_AM24H) +#define bfin_write_CAN1_AM24H(val) bfin_write16(CAN1_AM24H, val) +#define bfin_read_CAN1_AM25L() bfin_read16(CAN1_AM25L) +#define bfin_write_CAN1_AM25L(val) bfin_write16(CAN1_AM25L, val) +#define bfin_read_CAN1_AM25H() bfin_read16(CAN1_AM25H) +#define bfin_write_CAN1_AM25H(val) bfin_write16(CAN1_AM25H, val) +#define bfin_read_CAN1_AM26L() bfin_read16(CAN1_AM26L) +#define bfin_write_CAN1_AM26L(val) bfin_write16(CAN1_AM26L, val) +#define bfin_read_CAN1_AM26H() bfin_read16(CAN1_AM26H) +#define bfin_write_CAN1_AM26H(val) bfin_write16(CAN1_AM26H, val) +#define bfin_read_CAN1_AM27L() bfin_read16(CAN1_AM27L) +#define bfin_write_CAN1_AM27L(val) bfin_write16(CAN1_AM27L, val) +#define bfin_read_CAN1_AM27H() bfin_read16(CAN1_AM27H) +#define bfin_write_CAN1_AM27H(val) bfin_write16(CAN1_AM27H, val) +#define bfin_read_CAN1_AM28L() bfin_read16(CAN1_AM28L) +#define bfin_write_CAN1_AM28L(val) bfin_write16(CAN1_AM28L, val) +#define bfin_read_CAN1_AM28H() bfin_read16(CAN1_AM28H) +#define bfin_write_CAN1_AM28H(val) bfin_write16(CAN1_AM28H, val) +#define bfin_read_CAN1_AM29L() bfin_read16(CAN1_AM29L) +#define bfin_write_CAN1_AM29L(val) bfin_write16(CAN1_AM29L, val) +#define bfin_read_CAN1_AM29H() bfin_read16(CAN1_AM29H) +#define bfin_write_CAN1_AM29H(val) bfin_write16(CAN1_AM29H, val) +#define bfin_read_CAN1_AM30L() bfin_read16(CAN1_AM30L) +#define bfin_write_CAN1_AM30L(val) bfin_write16(CAN1_AM30L, val) +#define bfin_read_CAN1_AM30H() bfin_read16(CAN1_AM30H) +#define bfin_write_CAN1_AM30H(val) bfin_write16(CAN1_AM30H, val) +#define bfin_read_CAN1_AM31L() bfin_read16(CAN1_AM31L) +#define bfin_write_CAN1_AM31L(val) bfin_write16(CAN1_AM31L, val) +#define bfin_read_CAN1_AM31H() bfin_read16(CAN1_AM31H) +#define bfin_write_CAN1_AM31H(val) bfin_write16(CAN1_AM31H, val) + +/* CAN Controller 1 Mailbox Data Registers */ + +#define bfin_read_CAN1_MB00_DATA0() bfin_read16(CAN1_MB00_DATA0) +#define bfin_write_CAN1_MB00_DATA0(val) bfin_write16(CAN1_MB00_DATA0, val) +#define bfin_read_CAN1_MB00_DATA1() bfin_read16(CAN1_MB00_DATA1) +#define bfin_write_CAN1_MB00_DATA1(val) bfin_write16(CAN1_MB00_DATA1, val) +#define bfin_read_CAN1_MB00_DATA2() bfin_read16(CAN1_MB00_DATA2) +#define bfin_write_CAN1_MB00_DATA2(val) bfin_write16(CAN1_MB00_DATA2, val) +#define bfin_read_CAN1_MB00_DATA3() bfin_read16(CAN1_MB00_DATA3) +#define bfin_write_CAN1_MB00_DATA3(val) bfin_write16(CAN1_MB00_DATA3, val) +#define bfin_read_CAN1_MB00_LENGTH() bfin_read16(CAN1_MB00_LENGTH) +#define bfin_write_CAN1_MB00_LENGTH(val) bfin_write16(CAN1_MB00_LENGTH, val) +#define bfin_read_CAN1_MB00_TIMESTAMP() bfin_read16(CAN1_MB00_TIMESTAMP) +#define bfin_write_CAN1_MB00_TIMESTAMP(val) bfin_write16(CAN1_MB00_TIMESTAMP, val) +#define bfin_read_CAN1_MB00_ID0() bfin_read16(CAN1_MB00_ID0) +#define bfin_write_CAN1_MB00_ID0(val) bfin_write16(CAN1_MB00_ID0, val) +#define bfin_read_CAN1_MB00_ID1() bfin_read16(CAN1_MB00_ID1) +#define bfin_write_CAN1_MB00_ID1(val) bfin_write16(CAN1_MB00_ID1, val) +#define bfin_read_CAN1_MB01_DATA0() bfin_read16(CAN1_MB01_DATA0) +#define bfin_write_CAN1_MB01_DATA0(val) bfin_write16(CAN1_MB01_DATA0, val) +#define bfin_read_CAN1_MB01_DATA1() bfin_read16(CAN1_MB01_DATA1) +#define bfin_write_CAN1_MB01_DATA1(val) bfin_write16(CAN1_MB01_DATA1, val) +#define bfin_read_CAN1_MB01_DATA2() bfin_read16(CAN1_MB01_DATA2) +#define bfin_write_CAN1_MB01_DATA2(val) bfin_write16(CAN1_MB01_DATA2, val) +#define bfin_read_CAN1_MB01_DATA3() bfin_read16(CAN1_MB01_DATA3) +#define bfin_write_CAN1_MB01_DATA3(val) bfin_write16(CAN1_MB01_DATA3, val) +#define bfin_read_CAN1_MB01_LENGTH() bfin_read16(CAN1_MB01_LENGTH) +#define bfin_write_CAN1_MB01_LENGTH(val) bfin_write16(CAN1_MB01_LENGTH, val) +#define bfin_read_CAN1_MB01_TIMESTAMP() bfin_read16(CAN1_MB01_TIMESTAMP) +#define bfin_write_CAN1_MB01_TIMESTAMP(val) bfin_write16(CAN1_MB01_TIMESTAMP, val) +#define bfin_read_CAN1_MB01_ID0() bfin_read16(CAN1_MB01_ID0) +#define bfin_write_CAN1_MB01_ID0(val) bfin_write16(CAN1_MB01_ID0, val) +#define bfin_read_CAN1_MB01_ID1() bfin_read16(CAN1_MB01_ID1) +#define bfin_write_CAN1_MB01_ID1(val) bfin_write16(CAN1_MB01_ID1, val) +#define bfin_read_CAN1_MB02_DATA0() bfin_read16(CAN1_MB02_DATA0) +#define bfin_write_CAN1_MB02_DATA0(val) bfin_write16(CAN1_MB02_DATA0, val) +#define bfin_read_CAN1_MB02_DATA1() bfin_read16(CAN1_MB02_DATA1) +#define bfin_write_CAN1_MB02_DATA1(val) bfin_write16(CAN1_MB02_DATA1, val) +#define bfin_read_CAN1_MB02_DATA2() bfin_read16(CAN1_MB02_DATA2) +#define bfin_write_CAN1_MB02_DATA2(val) bfin_write16(CAN1_MB02_DATA2, val) +#define bfin_read_CAN1_MB02_DATA3() bfin_read16(CAN1_MB02_DATA3) +#define bfin_write_CAN1_MB02_DATA3(val) bfin_write16(CAN1_MB02_DATA3, val) +#define bfin_read_CAN1_MB02_LENGTH() bfin_read16(CAN1_MB02_LENGTH) +#define bfin_write_CAN1_MB02_LENGTH(val) bfin_write16(CAN1_MB02_LENGTH, val) +#define bfin_read_CAN1_MB02_TIMESTAMP() bfin_read16(CAN1_MB02_TIMESTAMP) +#define bfin_write_CAN1_MB02_TIMESTAMP(val) bfin_write16(CAN1_MB02_TIMESTAMP, val) +#define bfin_read_CAN1_MB02_ID0() bfin_read16(CAN1_MB02_ID0) +#define bfin_write_CAN1_MB02_ID0(val) bfin_write16(CAN1_MB02_ID0, val) +#define bfin_read_CAN1_MB02_ID1() bfin_read16(CAN1_MB02_ID1) +#define bfin_write_CAN1_MB02_ID1(val) bfin_write16(CAN1_MB02_ID1, val) +#define bfin_read_CAN1_MB03_DATA0() bfin_read16(CAN1_MB03_DATA0) +#define bfin_write_CAN1_MB03_DATA0(val) bfin_write16(CAN1_MB03_DATA0, val) +#define bfin_read_CAN1_MB03_DATA1() bfin_read16(CAN1_MB03_DATA1) +#define bfin_write_CAN1_MB03_DATA1(val) bfin_write16(CAN1_MB03_DATA1, val) +#define bfin_read_CAN1_MB03_DATA2() bfin_read16(CAN1_MB03_DATA2) +#define bfin_write_CAN1_MB03_DATA2(val) bfin_write16(CAN1_MB03_DATA2, val) +#define bfin_read_CAN1_MB03_DATA3() bfin_read16(CAN1_MB03_DATA3) +#define bfin_write_CAN1_MB03_DATA3(val) bfin_write16(CAN1_MB03_DATA3, val) +#define bfin_read_CAN1_MB03_LENGTH() bfin_read16(CAN1_MB03_LENGTH) +#define bfin_write_CAN1_MB03_LENGTH(val) bfin_write16(CAN1_MB03_LENGTH, val) +#define bfin_read_CAN1_MB03_TIMESTAMP() bfin_read16(CAN1_MB03_TIMESTAMP) +#define bfin_write_CAN1_MB03_TIMESTAMP(val) bfin_write16(CAN1_MB03_TIMESTAMP, val) +#define bfin_read_CAN1_MB03_ID0() bfin_read16(CAN1_MB03_ID0) +#define bfin_write_CAN1_MB03_ID0(val) bfin_write16(CAN1_MB03_ID0, val) +#define bfin_read_CAN1_MB03_ID1() bfin_read16(CAN1_MB03_ID1) +#define bfin_write_CAN1_MB03_ID1(val) bfin_write16(CAN1_MB03_ID1, val) +#define bfin_read_CAN1_MB04_DATA0() bfin_read16(CAN1_MB04_DATA0) +#define bfin_write_CAN1_MB04_DATA0(val) bfin_write16(CAN1_MB04_DATA0, val) +#define bfin_read_CAN1_MB04_DATA1() bfin_read16(CAN1_MB04_DATA1) +#define bfin_write_CAN1_MB04_DATA1(val) bfin_write16(CAN1_MB04_DATA1, val) +#define bfin_read_CAN1_MB04_DATA2() bfin_read16(CAN1_MB04_DATA2) +#define bfin_write_CAN1_MB04_DATA2(val) bfin_write16(CAN1_MB04_DATA2, val) +#define bfin_read_CAN1_MB04_DATA3() bfin_read16(CAN1_MB04_DATA3) +#define bfin_write_CAN1_MB04_DATA3(val) bfin_write16(CAN1_MB04_DATA3, val) +#define bfin_read_CAN1_MB04_LENGTH() bfin_read16(CAN1_MB04_LENGTH) +#define bfin_write_CAN1_MB04_LENGTH(val) bfin_write16(CAN1_MB04_LENGTH, val) +#define bfin_read_CAN1_MB04_TIMESTAMP() bfin_read16(CAN1_MB04_TIMESTAMP) +#define bfin_write_CAN1_MB04_TIMESTAMP(val) bfin_write16(CAN1_MB04_TIMESTAMP, val) +#define bfin_read_CAN1_MB04_ID0() bfin_read16(CAN1_MB04_ID0) +#define bfin_write_CAN1_MB04_ID0(val) bfin_write16(CAN1_MB04_ID0, val) +#define bfin_read_CAN1_MB04_ID1() bfin_read16(CAN1_MB04_ID1) +#define bfin_write_CAN1_MB04_ID1(val) bfin_write16(CAN1_MB04_ID1, val) +#define bfin_read_CAN1_MB05_DATA0() bfin_read16(CAN1_MB05_DATA0) +#define bfin_write_CAN1_MB05_DATA0(val) bfin_write16(CAN1_MB05_DATA0, val) +#define bfin_read_CAN1_MB05_DATA1() bfin_read16(CAN1_MB05_DATA1) +#define bfin_write_CAN1_MB05_DATA1(val) bfin_write16(CAN1_MB05_DATA1, val) +#define bfin_read_CAN1_MB05_DATA2() bfin_read16(CAN1_MB05_DATA2) +#define bfin_write_CAN1_MB05_DATA2(val) bfin_write16(CAN1_MB05_DATA2, val) +#define bfin_read_CAN1_MB05_DATA3() bfin_read16(CAN1_MB05_DATA3) +#define bfin_write_CAN1_MB05_DATA3(val) bfin_write16(CAN1_MB05_DATA3, val) +#define bfin_read_CAN1_MB05_LENGTH() bfin_read16(CAN1_MB05_LENGTH) +#define bfin_write_CAN1_MB05_LENGTH(val) bfin_write16(CAN1_MB05_LENGTH, val) +#define bfin_read_CAN1_MB05_TIMESTAMP() bfin_read16(CAN1_MB05_TIMESTAMP) +#define bfin_write_CAN1_MB05_TIMESTAMP(val) bfin_write16(CAN1_MB05_TIMESTAMP, val) +#define bfin_read_CAN1_MB05_ID0() bfin_read16(CAN1_MB05_ID0) +#define bfin_write_CAN1_MB05_ID0(val) bfin_write16(CAN1_MB05_ID0, val) +#define bfin_read_CAN1_MB05_ID1() bfin_read16(CAN1_MB05_ID1) +#define bfin_write_CAN1_MB05_ID1(val) bfin_write16(CAN1_MB05_ID1, val) +#define bfin_read_CAN1_MB06_DATA0() bfin_read16(CAN1_MB06_DATA0) +#define bfin_write_CAN1_MB06_DATA0(val) bfin_write16(CAN1_MB06_DATA0, val) +#define bfin_read_CAN1_MB06_DATA1() bfin_read16(CAN1_MB06_DATA1) +#define bfin_write_CAN1_MB06_DATA1(val) bfin_write16(CAN1_MB06_DATA1, val) +#define bfin_read_CAN1_MB06_DATA2() bfin_read16(CAN1_MB06_DATA2) +#define bfin_write_CAN1_MB06_DATA2(val) bfin_write16(CAN1_MB06_DATA2, val) +#define bfin_read_CAN1_MB06_DATA3() bfin_read16(CAN1_MB06_DATA3) +#define bfin_write_CAN1_MB06_DATA3(val) bfin_write16(CAN1_MB06_DATA3, val) +#define bfin_read_CAN1_MB06_LENGTH() bfin_read16(CAN1_MB06_LENGTH) +#define bfin_write_CAN1_MB06_LENGTH(val) bfin_write16(CAN1_MB06_LENGTH, val) +#define bfin_read_CAN1_MB06_TIMESTAMP() bfin_read16(CAN1_MB06_TIMESTAMP) +#define bfin_write_CAN1_MB06_TIMESTAMP(val) bfin_write16(CAN1_MB06_TIMESTAMP, val) +#define bfin_read_CAN1_MB06_ID0() bfin_read16(CAN1_MB06_ID0) +#define bfin_write_CAN1_MB06_ID0(val) bfin_write16(CAN1_MB06_ID0, val) +#define bfin_read_CAN1_MB06_ID1() bfin_read16(CAN1_MB06_ID1) +#define bfin_write_CAN1_MB06_ID1(val) bfin_write16(CAN1_MB06_ID1, val) +#define bfin_read_CAN1_MB07_DATA0() bfin_read16(CAN1_MB07_DATA0) +#define bfin_write_CAN1_MB07_DATA0(val) bfin_write16(CAN1_MB07_DATA0, val) +#define bfin_read_CAN1_MB07_DATA1() bfin_read16(CAN1_MB07_DATA1) +#define bfin_write_CAN1_MB07_DATA1(val) bfin_write16(CAN1_MB07_DATA1, val) +#define bfin_read_CAN1_MB07_DATA2() bfin_read16(CAN1_MB07_DATA2) +#define bfin_write_CAN1_MB07_DATA2(val) bfin_write16(CAN1_MB07_DATA2, val) +#define bfin_read_CAN1_MB07_DATA3() bfin_read16(CAN1_MB07_DATA3) +#define bfin_write_CAN1_MB07_DATA3(val) bfin_write16(CAN1_MB07_DATA3, val) +#define bfin_read_CAN1_MB07_LENGTH() bfin_read16(CAN1_MB07_LENGTH) +#define bfin_write_CAN1_MB07_LENGTH(val) bfin_write16(CAN1_MB07_LENGTH, val) +#define bfin_read_CAN1_MB07_TIMESTAMP() bfin_read16(CAN1_MB07_TIMESTAMP) +#define bfin_write_CAN1_MB07_TIMESTAMP(val) bfin_write16(CAN1_MB07_TIMESTAMP, val) +#define bfin_read_CAN1_MB07_ID0() bfin_read16(CAN1_MB07_ID0) +#define bfin_write_CAN1_MB07_ID0(val) bfin_write16(CAN1_MB07_ID0, val) +#define bfin_read_CAN1_MB07_ID1() bfin_read16(CAN1_MB07_ID1) +#define bfin_write_CAN1_MB07_ID1(val) bfin_write16(CAN1_MB07_ID1, val) +#define bfin_read_CAN1_MB08_DATA0() bfin_read16(CAN1_MB08_DATA0) +#define bfin_write_CAN1_MB08_DATA0(val) bfin_write16(CAN1_MB08_DATA0, val) +#define bfin_read_CAN1_MB08_DATA1() bfin_read16(CAN1_MB08_DATA1) +#define bfin_write_CAN1_MB08_DATA1(val) bfin_write16(CAN1_MB08_DATA1, val) +#define bfin_read_CAN1_MB08_DATA2() bfin_read16(CAN1_MB08_DATA2) +#define bfin_write_CAN1_MB08_DATA2(val) bfin_write16(CAN1_MB08_DATA2, val) +#define bfin_read_CAN1_MB08_DATA3() bfin_read16(CAN1_MB08_DATA3) +#define bfin_write_CAN1_MB08_DATA3(val) bfin_write16(CAN1_MB08_DATA3, val) +#define bfin_read_CAN1_MB08_LENGTH() bfin_read16(CAN1_MB08_LENGTH) +#define bfin_write_CAN1_MB08_LENGTH(val) bfin_write16(CAN1_MB08_LENGTH, val) +#define bfin_read_CAN1_MB08_TIMESTAMP() bfin_read16(CAN1_MB08_TIMESTAMP) +#define bfin_write_CAN1_MB08_TIMESTAMP(val) bfin_write16(CAN1_MB08_TIMESTAMP, val) +#define bfin_read_CAN1_MB08_ID0() bfin_read16(CAN1_MB08_ID0) +#define bfin_write_CAN1_MB08_ID0(val) bfin_write16(CAN1_MB08_ID0, val) +#define bfin_read_CAN1_MB08_ID1() bfin_read16(CAN1_MB08_ID1) +#define bfin_write_CAN1_MB08_ID1(val) bfin_write16(CAN1_MB08_ID1, val) +#define bfin_read_CAN1_MB09_DATA0() bfin_read16(CAN1_MB09_DATA0) +#define bfin_write_CAN1_MB09_DATA0(val) bfin_write16(CAN1_MB09_DATA0, val) +#define bfin_read_CAN1_MB09_DATA1() bfin_read16(CAN1_MB09_DATA1) +#define bfin_write_CAN1_MB09_DATA1(val) bfin_write16(CAN1_MB09_DATA1, val) +#define bfin_read_CAN1_MB09_DATA2() bfin_read16(CAN1_MB09_DATA2) +#define bfin_write_CAN1_MB09_DATA2(val) bfin_write16(CAN1_MB09_DATA2, val) +#define bfin_read_CAN1_MB09_DATA3() bfin_read16(CAN1_MB09_DATA3) +#define bfin_write_CAN1_MB09_DATA3(val) bfin_write16(CAN1_MB09_DATA3, val) +#define bfin_read_CAN1_MB09_LENGTH() bfin_read16(CAN1_MB09_LENGTH) +#define bfin_write_CAN1_MB09_LENGTH(val) bfin_write16(CAN1_MB09_LENGTH, val) +#define bfin_read_CAN1_MB09_TIMESTAMP() bfin_read16(CAN1_MB09_TIMESTAMP) +#define bfin_write_CAN1_MB09_TIMESTAMP(val) bfin_write16(CAN1_MB09_TIMESTAMP, val) +#define bfin_read_CAN1_MB09_ID0() bfin_read16(CAN1_MB09_ID0) +#define bfin_write_CAN1_MB09_ID0(val) bfin_write16(CAN1_MB09_ID0, val) +#define bfin_read_CAN1_MB09_ID1() bfin_read16(CAN1_MB09_ID1) +#define bfin_write_CAN1_MB09_ID1(val) bfin_write16(CAN1_MB09_ID1, val) +#define bfin_read_CAN1_MB10_DATA0() bfin_read16(CAN1_MB10_DATA0) +#define bfin_write_CAN1_MB10_DATA0(val) bfin_write16(CAN1_MB10_DATA0, val) +#define bfin_read_CAN1_MB10_DATA1() bfin_read16(CAN1_MB10_DATA1) +#define bfin_write_CAN1_MB10_DATA1(val) bfin_write16(CAN1_MB10_DATA1, val) +#define bfin_read_CAN1_MB10_DATA2() bfin_read16(CAN1_MB10_DATA2) +#define bfin_write_CAN1_MB10_DATA2(val) bfin_write16(CAN1_MB10_DATA2, val) +#define bfin_read_CAN1_MB10_DATA3() bfin_read16(CAN1_MB10_DATA3) +#define bfin_write_CAN1_MB10_DATA3(val) bfin_write16(CAN1_MB10_DATA3, val) +#define bfin_read_CAN1_MB10_LENGTH() bfin_read16(CAN1_MB10_LENGTH) +#define bfin_write_CAN1_MB10_LENGTH(val) bfin_write16(CAN1_MB10_LENGTH, val) +#define bfin_read_CAN1_MB10_TIMESTAMP() bfin_read16(CAN1_MB10_TIMESTAMP) +#define bfin_write_CAN1_MB10_TIMESTAMP(val) bfin_write16(CAN1_MB10_TIMESTAMP, val) +#define bfin_read_CAN1_MB10_ID0() bfin_read16(CAN1_MB10_ID0) +#define bfin_write_CAN1_MB10_ID0(val) bfin_write16(CAN1_MB10_ID0, val) +#define bfin_read_CAN1_MB10_ID1() bfin_read16(CAN1_MB10_ID1) +#define bfin_write_CAN1_MB10_ID1(val) bfin_write16(CAN1_MB10_ID1, val) +#define bfin_read_CAN1_MB11_DATA0() bfin_read16(CAN1_MB11_DATA0) +#define bfin_write_CAN1_MB11_DATA0(val) bfin_write16(CAN1_MB11_DATA0, val) +#define bfin_read_CAN1_MB11_DATA1() bfin_read16(CAN1_MB11_DATA1) +#define bfin_write_CAN1_MB11_DATA1(val) bfin_write16(CAN1_MB11_DATA1, val) +#define bfin_read_CAN1_MB11_DATA2() bfin_read16(CAN1_MB11_DATA2) +#define bfin_write_CAN1_MB11_DATA2(val) bfin_write16(CAN1_MB11_DATA2, val) +#define bfin_read_CAN1_MB11_DATA3() bfin_read16(CAN1_MB11_DATA3) +#define bfin_write_CAN1_MB11_DATA3(val) bfin_write16(CAN1_MB11_DATA3, val) +#define bfin_read_CAN1_MB11_LENGTH() bfin_read16(CAN1_MB11_LENGTH) +#define bfin_write_CAN1_MB11_LENGTH(val) bfin_write16(CAN1_MB11_LENGTH, val) +#define bfin_read_CAN1_MB11_TIMESTAMP() bfin_read16(CAN1_MB11_TIMESTAMP) +#define bfin_write_CAN1_MB11_TIMESTAMP(val) bfin_write16(CAN1_MB11_TIMESTAMP, val) +#define bfin_read_CAN1_MB11_ID0() bfin_read16(CAN1_MB11_ID0) +#define bfin_write_CAN1_MB11_ID0(val) bfin_write16(CAN1_MB11_ID0, val) +#define bfin_read_CAN1_MB11_ID1() bfin_read16(CAN1_MB11_ID1) +#define bfin_write_CAN1_MB11_ID1(val) bfin_write16(CAN1_MB11_ID1, val) +#define bfin_read_CAN1_MB12_DATA0() bfin_read16(CAN1_MB12_DATA0) +#define bfin_write_CAN1_MB12_DATA0(val) bfin_write16(CAN1_MB12_DATA0, val) +#define bfin_read_CAN1_MB12_DATA1() bfin_read16(CAN1_MB12_DATA1) +#define bfin_write_CAN1_MB12_DATA1(val) bfin_write16(CAN1_MB12_DATA1, val) +#define bfin_read_CAN1_MB12_DATA2() bfin_read16(CAN1_MB12_DATA2) +#define bfin_write_CAN1_MB12_DATA2(val) bfin_write16(CAN1_MB12_DATA2, val) +#define bfin_read_CAN1_MB12_DATA3() bfin_read16(CAN1_MB12_DATA3) +#define bfin_write_CAN1_MB12_DATA3(val) bfin_write16(CAN1_MB12_DATA3, val) +#define bfin_read_CAN1_MB12_LENGTH() bfin_read16(CAN1_MB12_LENGTH) +#define bfin_write_CAN1_MB12_LENGTH(val) bfin_write16(CAN1_MB12_LENGTH, val) +#define bfin_read_CAN1_MB12_TIMESTAMP() bfin_read16(CAN1_MB12_TIMESTAMP) +#define bfin_write_CAN1_MB12_TIMESTAMP(val) bfin_write16(CAN1_MB12_TIMESTAMP, val) +#define bfin_read_CAN1_MB12_ID0() bfin_read16(CAN1_MB12_ID0) +#define bfin_write_CAN1_MB12_ID0(val) bfin_write16(CAN1_MB12_ID0, val) +#define bfin_read_CAN1_MB12_ID1() bfin_read16(CAN1_MB12_ID1) +#define bfin_write_CAN1_MB12_ID1(val) bfin_write16(CAN1_MB12_ID1, val) +#define bfin_read_CAN1_MB13_DATA0() bfin_read16(CAN1_MB13_DATA0) +#define bfin_write_CAN1_MB13_DATA0(val) bfin_write16(CAN1_MB13_DATA0, val) +#define bfin_read_CAN1_MB13_DATA1() bfin_read16(CAN1_MB13_DATA1) +#define bfin_write_CAN1_MB13_DATA1(val) bfin_write16(CAN1_MB13_DATA1, val) +#define bfin_read_CAN1_MB13_DATA2() bfin_read16(CAN1_MB13_DATA2) +#define bfin_write_CAN1_MB13_DATA2(val) bfin_write16(CAN1_MB13_DATA2, val) +#define bfin_read_CAN1_MB13_DATA3() bfin_read16(CAN1_MB13_DATA3) +#define bfin_write_CAN1_MB13_DATA3(val) bfin_write16(CAN1_MB13_DATA3, val) +#define bfin_read_CAN1_MB13_LENGTH() bfin_read16(CAN1_MB13_LENGTH) +#define bfin_write_CAN1_MB13_LENGTH(val) bfin_write16(CAN1_MB13_LENGTH, val) +#define bfin_read_CAN1_MB13_TIMESTAMP() bfin_read16(CAN1_MB13_TIMESTAMP) +#define bfin_write_CAN1_MB13_TIMESTAMP(val) bfin_write16(CAN1_MB13_TIMESTAMP, val) +#define bfin_read_CAN1_MB13_ID0() bfin_read16(CAN1_MB13_ID0) +#define bfin_write_CAN1_MB13_ID0(val) bfin_write16(CAN1_MB13_ID0, val) +#define bfin_read_CAN1_MB13_ID1() bfin_read16(CAN1_MB13_ID1) +#define bfin_write_CAN1_MB13_ID1(val) bfin_write16(CAN1_MB13_ID1, val) +#define bfin_read_CAN1_MB14_DATA0() bfin_read16(CAN1_MB14_DATA0) +#define bfin_write_CAN1_MB14_DATA0(val) bfin_write16(CAN1_MB14_DATA0, val) +#define bfin_read_CAN1_MB14_DATA1() bfin_read16(CAN1_MB14_DATA1) +#define bfin_write_CAN1_MB14_DATA1(val) bfin_write16(CAN1_MB14_DATA1, val) +#define bfin_read_CAN1_MB14_DATA2() bfin_read16(CAN1_MB14_DATA2) +#define bfin_write_CAN1_MB14_DATA2(val) bfin_write16(CAN1_MB14_DATA2, val) +#define bfin_read_CAN1_MB14_DATA3() bfin_read16(CAN1_MB14_DATA3) +#define bfin_write_CAN1_MB14_DATA3(val) bfin_write16(CAN1_MB14_DATA3, val) +#define bfin_read_CAN1_MB14_LENGTH() bfin_read16(CAN1_MB14_LENGTH) +#define bfin_write_CAN1_MB14_LENGTH(val) bfin_write16(CAN1_MB14_LENGTH, val) +#define bfin_read_CAN1_MB14_TIMESTAMP() bfin_read16(CAN1_MB14_TIMESTAMP) +#define bfin_write_CAN1_MB14_TIMESTAMP(val) bfin_write16(CAN1_MB14_TIMESTAMP, val) +#define bfin_read_CAN1_MB14_ID0() bfin_read16(CAN1_MB14_ID0) +#define bfin_write_CAN1_MB14_ID0(val) bfin_write16(CAN1_MB14_ID0, val) +#define bfin_read_CAN1_MB14_ID1() bfin_read16(CAN1_MB14_ID1) +#define bfin_write_CAN1_MB14_ID1(val) bfin_write16(CAN1_MB14_ID1, val) +#define bfin_read_CAN1_MB15_DATA0() bfin_read16(CAN1_MB15_DATA0) +#define bfin_write_CAN1_MB15_DATA0(val) bfin_write16(CAN1_MB15_DATA0, val) +#define bfin_read_CAN1_MB15_DATA1() bfin_read16(CAN1_MB15_DATA1) +#define bfin_write_CAN1_MB15_DATA1(val) bfin_write16(CAN1_MB15_DATA1, val) +#define bfin_read_CAN1_MB15_DATA2() bfin_read16(CAN1_MB15_DATA2) +#define bfin_write_CAN1_MB15_DATA2(val) bfin_write16(CAN1_MB15_DATA2, val) +#define bfin_read_CAN1_MB15_DATA3() bfin_read16(CAN1_MB15_DATA3) +#define bfin_write_CAN1_MB15_DATA3(val) bfin_write16(CAN1_MB15_DATA3, val) +#define bfin_read_CAN1_MB15_LENGTH() bfin_read16(CAN1_MB15_LENGTH) +#define bfin_write_CAN1_MB15_LENGTH(val) bfin_write16(CAN1_MB15_LENGTH, val) +#define bfin_read_CAN1_MB15_TIMESTAMP() bfin_read16(CAN1_MB15_TIMESTAMP) +#define bfin_write_CAN1_MB15_TIMESTAMP(val) bfin_write16(CAN1_MB15_TIMESTAMP, val) +#define bfin_read_CAN1_MB15_ID0() bfin_read16(CAN1_MB15_ID0) +#define bfin_write_CAN1_MB15_ID0(val) bfin_write16(CAN1_MB15_ID0, val) +#define bfin_read_CAN1_MB15_ID1() bfin_read16(CAN1_MB15_ID1) +#define bfin_write_CAN1_MB15_ID1(val) bfin_write16(CAN1_MB15_ID1, val) + +/* CAN Controller 1 Mailbox Data Registers */ + +#define bfin_read_CAN1_MB16_DATA0() bfin_read16(CAN1_MB16_DATA0) +#define bfin_write_CAN1_MB16_DATA0(val) bfin_write16(CAN1_MB16_DATA0, val) +#define bfin_read_CAN1_MB16_DATA1() bfin_read16(CAN1_MB16_DATA1) +#define bfin_write_CAN1_MB16_DATA1(val) bfin_write16(CAN1_MB16_DATA1, val) +#define bfin_read_CAN1_MB16_DATA2() bfin_read16(CAN1_MB16_DATA2) +#define bfin_write_CAN1_MB16_DATA2(val) bfin_write16(CAN1_MB16_DATA2, val) +#define bfin_read_CAN1_MB16_DATA3() bfin_read16(CAN1_MB16_DATA3) +#define bfin_write_CAN1_MB16_DATA3(val) bfin_write16(CAN1_MB16_DATA3, val) +#define bfin_read_CAN1_MB16_LENGTH() bfin_read16(CAN1_MB16_LENGTH) +#define bfin_write_CAN1_MB16_LENGTH(val) bfin_write16(CAN1_MB16_LENGTH, val) +#define bfin_read_CAN1_MB16_TIMESTAMP() bfin_read16(CAN1_MB16_TIMESTAMP) +#define bfin_write_CAN1_MB16_TIMESTAMP(val) bfin_write16(CAN1_MB16_TIMESTAMP, val) +#define bfin_read_CAN1_MB16_ID0() bfin_read16(CAN1_MB16_ID0) +#define bfin_write_CAN1_MB16_ID0(val) bfin_write16(CAN1_MB16_ID0, val) +#define bfin_read_CAN1_MB16_ID1() bfin_read16(CAN1_MB16_ID1) +#define bfin_write_CAN1_MB16_ID1(val) bfin_write16(CAN1_MB16_ID1, val) +#define bfin_read_CAN1_MB17_DATA0() bfin_read16(CAN1_MB17_DATA0) +#define bfin_write_CAN1_MB17_DATA0(val) bfin_write16(CAN1_MB17_DATA0, val) +#define bfin_read_CAN1_MB17_DATA1() bfin_read16(CAN1_MB17_DATA1) +#define bfin_write_CAN1_MB17_DATA1(val) bfin_write16(CAN1_MB17_DATA1, val) +#define bfin_read_CAN1_MB17_DATA2() bfin_read16(CAN1_MB17_DATA2) +#define bfin_write_CAN1_MB17_DATA2(val) bfin_write16(CAN1_MB17_DATA2, val) +#define bfin_read_CAN1_MB17_DATA3() bfin_read16(CAN1_MB17_DATA3) +#define bfin_write_CAN1_MB17_DATA3(val) bfin_write16(CAN1_MB17_DATA3, val) +#define bfin_read_CAN1_MB17_LENGTH() bfin_read16(CAN1_MB17_LENGTH) +#define bfin_write_CAN1_MB17_LENGTH(val) bfin_write16(CAN1_MB17_LENGTH, val) +#define bfin_read_CAN1_MB17_TIMESTAMP() bfin_read16(CAN1_MB17_TIMESTAMP) +#define bfin_write_CAN1_MB17_TIMESTAMP(val) bfin_write16(CAN1_MB17_TIMESTAMP, val) +#define bfin_read_CAN1_MB17_ID0() bfin_read16(CAN1_MB17_ID0) +#define bfin_write_CAN1_MB17_ID0(val) bfin_write16(CAN1_MB17_ID0, val) +#define bfin_read_CAN1_MB17_ID1() bfin_read16(CAN1_MB17_ID1) +#define bfin_write_CAN1_MB17_ID1(val) bfin_write16(CAN1_MB17_ID1, val) +#define bfin_read_CAN1_MB18_DATA0() bfin_read16(CAN1_MB18_DATA0) +#define bfin_write_CAN1_MB18_DATA0(val) bfin_write16(CAN1_MB18_DATA0, val) +#define bfin_read_CAN1_MB18_DATA1() bfin_read16(CAN1_MB18_DATA1) +#define bfin_write_CAN1_MB18_DATA1(val) bfin_write16(CAN1_MB18_DATA1, val) +#define bfin_read_CAN1_MB18_DATA2() bfin_read16(CAN1_MB18_DATA2) +#define bfin_write_CAN1_MB18_DATA2(val) bfin_write16(CAN1_MB18_DATA2, val) +#define bfin_read_CAN1_MB18_DATA3() bfin_read16(CAN1_MB18_DATA3) +#define bfin_write_CAN1_MB18_DATA3(val) bfin_write16(CAN1_MB18_DATA3, val) +#define bfin_read_CAN1_MB18_LENGTH() bfin_read16(CAN1_MB18_LENGTH) +#define bfin_write_CAN1_MB18_LENGTH(val) bfin_write16(CAN1_MB18_LENGTH, val) +#define bfin_read_CAN1_MB18_TIMESTAMP() bfin_read16(CAN1_MB18_TIMESTAMP) +#define bfin_write_CAN1_MB18_TIMESTAMP(val) bfin_write16(CAN1_MB18_TIMESTAMP, val) +#define bfin_read_CAN1_MB18_ID0() bfin_read16(CAN1_MB18_ID0) +#define bfin_write_CAN1_MB18_ID0(val) bfin_write16(CAN1_MB18_ID0, val) +#define bfin_read_CAN1_MB18_ID1() bfin_read16(CAN1_MB18_ID1) +#define bfin_write_CAN1_MB18_ID1(val) bfin_write16(CAN1_MB18_ID1, val) +#define bfin_read_CAN1_MB19_DATA0() bfin_read16(CAN1_MB19_DATA0) +#define bfin_write_CAN1_MB19_DATA0(val) bfin_write16(CAN1_MB19_DATA0, val) +#define bfin_read_CAN1_MB19_DATA1() bfin_read16(CAN1_MB19_DATA1) +#define bfin_write_CAN1_MB19_DATA1(val) bfin_write16(CAN1_MB19_DATA1, val) +#define bfin_read_CAN1_MB19_DATA2() bfin_read16(CAN1_MB19_DATA2) +#define bfin_write_CAN1_MB19_DATA2(val) bfin_write16(CAN1_MB19_DATA2, val) +#define bfin_read_CAN1_MB19_DATA3() bfin_read16(CAN1_MB19_DATA3) +#define bfin_write_CAN1_MB19_DATA3(val) bfin_write16(CAN1_MB19_DATA3, val) +#define bfin_read_CAN1_MB19_LENGTH() bfin_read16(CAN1_MB19_LENGTH) +#define bfin_write_CAN1_MB19_LENGTH(val) bfin_write16(CAN1_MB19_LENGTH, val) +#define bfin_read_CAN1_MB19_TIMESTAMP() bfin_read16(CAN1_MB19_TIMESTAMP) +#define bfin_write_CAN1_MB19_TIMESTAMP(val) bfin_write16(CAN1_MB19_TIMESTAMP, val) +#define bfin_read_CAN1_MB19_ID0() bfin_read16(CAN1_MB19_ID0) +#define bfin_write_CAN1_MB19_ID0(val) bfin_write16(CAN1_MB19_ID0, val) +#define bfin_read_CAN1_MB19_ID1() bfin_read16(CAN1_MB19_ID1) +#define bfin_write_CAN1_MB19_ID1(val) bfin_write16(CAN1_MB19_ID1, val) +#define bfin_read_CAN1_MB20_DATA0() bfin_read16(CAN1_MB20_DATA0) +#define bfin_write_CAN1_MB20_DATA0(val) bfin_write16(CAN1_MB20_DATA0, val) +#define bfin_read_CAN1_MB20_DATA1() bfin_read16(CAN1_MB20_DATA1) +#define bfin_write_CAN1_MB20_DATA1(val) bfin_write16(CAN1_MB20_DATA1, val) +#define bfin_read_CAN1_MB20_DATA2() bfin_read16(CAN1_MB20_DATA2) +#define bfin_write_CAN1_MB20_DATA2(val) bfin_write16(CAN1_MB20_DATA2, val) +#define bfin_read_CAN1_MB20_DATA3() bfin_read16(CAN1_MB20_DATA3) +#define bfin_write_CAN1_MB20_DATA3(val) bfin_write16(CAN1_MB20_DATA3, val) +#define bfin_read_CAN1_MB20_LENGTH() bfin_read16(CAN1_MB20_LENGTH) +#define bfin_write_CAN1_MB20_LENGTH(val) bfin_write16(CAN1_MB20_LENGTH, val) +#define bfin_read_CAN1_MB20_TIMESTAMP() bfin_read16(CAN1_MB20_TIMESTAMP) +#define bfin_write_CAN1_MB20_TIMESTAMP(val) bfin_write16(CAN1_MB20_TIMESTAMP, val) +#define bfin_read_CAN1_MB20_ID0() bfin_read16(CAN1_MB20_ID0) +#define bfin_write_CAN1_MB20_ID0(val) bfin_write16(CAN1_MB20_ID0, val) +#define bfin_read_CAN1_MB20_ID1() bfin_read16(CAN1_MB20_ID1) +#define bfin_write_CAN1_MB20_ID1(val) bfin_write16(CAN1_MB20_ID1, val) +#define bfin_read_CAN1_MB21_DATA0() bfin_read16(CAN1_MB21_DATA0) +#define bfin_write_CAN1_MB21_DATA0(val) bfin_write16(CAN1_MB21_DATA0, val) +#define bfin_read_CAN1_MB21_DATA1() bfin_read16(CAN1_MB21_DATA1) +#define bfin_write_CAN1_MB21_DATA1(val) bfin_write16(CAN1_MB21_DATA1, val) +#define bfin_read_CAN1_MB21_DATA2() bfin_read16(CAN1_MB21_DATA2) +#define bfin_write_CAN1_MB21_DATA2(val) bfin_write16(CAN1_MB21_DATA2, val) +#define bfin_read_CAN1_MB21_DATA3() bfin_read16(CAN1_MB21_DATA3) +#define bfin_write_CAN1_MB21_DATA3(val) bfin_write16(CAN1_MB21_DATA3, val) +#define bfin_read_CAN1_MB21_LENGTH() bfin_read16(CAN1_MB21_LENGTH) +#define bfin_write_CAN1_MB21_LENGTH(val) bfin_write16(CAN1_MB21_LENGTH, val) +#define bfin_read_CAN1_MB21_TIMESTAMP() bfin_read16(CAN1_MB21_TIMESTAMP) +#define bfin_write_CAN1_MB21_TIMESTAMP(val) bfin_write16(CAN1_MB21_TIMESTAMP, val) +#define bfin_read_CAN1_MB21_ID0() bfin_read16(CAN1_MB21_ID0) +#define bfin_write_CAN1_MB21_ID0(val) bfin_write16(CAN1_MB21_ID0, val) +#define bfin_read_CAN1_MB21_ID1() bfin_read16(CAN1_MB21_ID1) +#define bfin_write_CAN1_MB21_ID1(val) bfin_write16(CAN1_MB21_ID1, val) +#define bfin_read_CAN1_MB22_DATA0() bfin_read16(CAN1_MB22_DATA0) +#define bfin_write_CAN1_MB22_DATA0(val) bfin_write16(CAN1_MB22_DATA0, val) +#define bfin_read_CAN1_MB22_DATA1() bfin_read16(CAN1_MB22_DATA1) +#define bfin_write_CAN1_MB22_DATA1(val) bfin_write16(CAN1_MB22_DATA1, val) +#define bfin_read_CAN1_MB22_DATA2() bfin_read16(CAN1_MB22_DATA2) +#define bfin_write_CAN1_MB22_DATA2(val) bfin_write16(CAN1_MB22_DATA2, val) +#define bfin_read_CAN1_MB22_DATA3() bfin_read16(CAN1_MB22_DATA3) +#define bfin_write_CAN1_MB22_DATA3(val) bfin_write16(CAN1_MB22_DATA3, val) +#define bfin_read_CAN1_MB22_LENGTH() bfin_read16(CAN1_MB22_LENGTH) +#define bfin_write_CAN1_MB22_LENGTH(val) bfin_write16(CAN1_MB22_LENGTH, val) +#define bfin_read_CAN1_MB22_TIMESTAMP() bfin_read16(CAN1_MB22_TIMESTAMP) +#define bfin_write_CAN1_MB22_TIMESTAMP(val) bfin_write16(CAN1_MB22_TIMESTAMP, val) +#define bfin_read_CAN1_MB22_ID0() bfin_read16(CAN1_MB22_ID0) +#define bfin_write_CAN1_MB22_ID0(val) bfin_write16(CAN1_MB22_ID0, val) +#define bfin_read_CAN1_MB22_ID1() bfin_read16(CAN1_MB22_ID1) +#define bfin_write_CAN1_MB22_ID1(val) bfin_write16(CAN1_MB22_ID1, val) +#define bfin_read_CAN1_MB23_DATA0() bfin_read16(CAN1_MB23_DATA0) +#define bfin_write_CAN1_MB23_DATA0(val) bfin_write16(CAN1_MB23_DATA0, val) +#define bfin_read_CAN1_MB23_DATA1() bfin_read16(CAN1_MB23_DATA1) +#define bfin_write_CAN1_MB23_DATA1(val) bfin_write16(CAN1_MB23_DATA1, val) +#define bfin_read_CAN1_MB23_DATA2() bfin_read16(CAN1_MB23_DATA2) +#define bfin_write_CAN1_MB23_DATA2(val) bfin_write16(CAN1_MB23_DATA2, val) +#define bfin_read_CAN1_MB23_DATA3() bfin_read16(CAN1_MB23_DATA3) +#define bfin_write_CAN1_MB23_DATA3(val) bfin_write16(CAN1_MB23_DATA3, val) +#define bfin_read_CAN1_MB23_LENGTH() bfin_read16(CAN1_MB23_LENGTH) +#define bfin_write_CAN1_MB23_LENGTH(val) bfin_write16(CAN1_MB23_LENGTH, val) +#define bfin_read_CAN1_MB23_TIMESTAMP() bfin_read16(CAN1_MB23_TIMESTAMP) +#define bfin_write_CAN1_MB23_TIMESTAMP(val) bfin_write16(CAN1_MB23_TIMESTAMP, val) +#define bfin_read_CAN1_MB23_ID0() bfin_read16(CAN1_MB23_ID0) +#define bfin_write_CAN1_MB23_ID0(val) bfin_write16(CAN1_MB23_ID0, val) +#define bfin_read_CAN1_MB23_ID1() bfin_read16(CAN1_MB23_ID1) +#define bfin_write_CAN1_MB23_ID1(val) bfin_write16(CAN1_MB23_ID1, val) +#define bfin_read_CAN1_MB24_DATA0() bfin_read16(CAN1_MB24_DATA0) +#define bfin_write_CAN1_MB24_DATA0(val) bfin_write16(CAN1_MB24_DATA0, val) +#define bfin_read_CAN1_MB24_DATA1() bfin_read16(CAN1_MB24_DATA1) +#define bfin_write_CAN1_MB24_DATA1(val) bfin_write16(CAN1_MB24_DATA1, val) +#define bfin_read_CAN1_MB24_DATA2() bfin_read16(CAN1_MB24_DATA2) +#define bfin_write_CAN1_MB24_DATA2(val) bfin_write16(CAN1_MB24_DATA2, val) +#define bfin_read_CAN1_MB24_DATA3() bfin_read16(CAN1_MB24_DATA3) +#define bfin_write_CAN1_MB24_DATA3(val) bfin_write16(CAN1_MB24_DATA3, val) +#define bfin_read_CAN1_MB24_LENGTH() bfin_read16(CAN1_MB24_LENGTH) +#define bfin_write_CAN1_MB24_LENGTH(val) bfin_write16(CAN1_MB24_LENGTH, val) +#define bfin_read_CAN1_MB24_TIMESTAMP() bfin_read16(CAN1_MB24_TIMESTAMP) +#define bfin_write_CAN1_MB24_TIMESTAMP(val) bfin_write16(CAN1_MB24_TIMESTAMP, val) +#define bfin_read_CAN1_MB24_ID0() bfin_read16(CAN1_MB24_ID0) +#define bfin_write_CAN1_MB24_ID0(val) bfin_write16(CAN1_MB24_ID0, val) +#define bfin_read_CAN1_MB24_ID1() bfin_read16(CAN1_MB24_ID1) +#define bfin_write_CAN1_MB24_ID1(val) bfin_write16(CAN1_MB24_ID1, val) +#define bfin_read_CAN1_MB25_DATA0() bfin_read16(CAN1_MB25_DATA0) +#define bfin_write_CAN1_MB25_DATA0(val) bfin_write16(CAN1_MB25_DATA0, val) +#define bfin_read_CAN1_MB25_DATA1() bfin_read16(CAN1_MB25_DATA1) +#define bfin_write_CAN1_MB25_DATA1(val) bfin_write16(CAN1_MB25_DATA1, val) +#define bfin_read_CAN1_MB25_DATA2() bfin_read16(CAN1_MB25_DATA2) +#define bfin_write_CAN1_MB25_DATA2(val) bfin_write16(CAN1_MB25_DATA2, val) +#define bfin_read_CAN1_MB25_DATA3() bfin_read16(CAN1_MB25_DATA3) +#define bfin_write_CAN1_MB25_DATA3(val) bfin_write16(CAN1_MB25_DATA3, val) +#define bfin_read_CAN1_MB25_LENGTH() bfin_read16(CAN1_MB25_LENGTH) +#define bfin_write_CAN1_MB25_LENGTH(val) bfin_write16(CAN1_MB25_LENGTH, val) +#define bfin_read_CAN1_MB25_TIMESTAMP() bfin_read16(CAN1_MB25_TIMESTAMP) +#define bfin_write_CAN1_MB25_TIMESTAMP(val) bfin_write16(CAN1_MB25_TIMESTAMP, val) +#define bfin_read_CAN1_MB25_ID0() bfin_read16(CAN1_MB25_ID0) +#define bfin_write_CAN1_MB25_ID0(val) bfin_write16(CAN1_MB25_ID0, val) +#define bfin_read_CAN1_MB25_ID1() bfin_read16(CAN1_MB25_ID1) +#define bfin_write_CAN1_MB25_ID1(val) bfin_write16(CAN1_MB25_ID1, val) +#define bfin_read_CAN1_MB26_DATA0() bfin_read16(CAN1_MB26_DATA0) +#define bfin_write_CAN1_MB26_DATA0(val) bfin_write16(CAN1_MB26_DATA0, val) +#define bfin_read_CAN1_MB26_DATA1() bfin_read16(CAN1_MB26_DATA1) +#define bfin_write_CAN1_MB26_DATA1(val) bfin_write16(CAN1_MB26_DATA1, val) +#define bfin_read_CAN1_MB26_DATA2() bfin_read16(CAN1_MB26_DATA2) +#define bfin_write_CAN1_MB26_DATA2(val) bfin_write16(CAN1_MB26_DATA2, val) +#define bfin_read_CAN1_MB26_DATA3() bfin_read16(CAN1_MB26_DATA3) +#define bfin_write_CAN1_MB26_DATA3(val) bfin_write16(CAN1_MB26_DATA3, val) +#define bfin_read_CAN1_MB26_LENGTH() bfin_read16(CAN1_MB26_LENGTH) +#define bfin_write_CAN1_MB26_LENGTH(val) bfin_write16(CAN1_MB26_LENGTH, val) +#define bfin_read_CAN1_MB26_TIMESTAMP() bfin_read16(CAN1_MB26_TIMESTAMP) +#define bfin_write_CAN1_MB26_TIMESTAMP(val) bfin_write16(CAN1_MB26_TIMESTAMP, val) +#define bfin_read_CAN1_MB26_ID0() bfin_read16(CAN1_MB26_ID0) +#define bfin_write_CAN1_MB26_ID0(val) bfin_write16(CAN1_MB26_ID0, val) +#define bfin_read_CAN1_MB26_ID1() bfin_read16(CAN1_MB26_ID1) +#define bfin_write_CAN1_MB26_ID1(val) bfin_write16(CAN1_MB26_ID1, val) +#define bfin_read_CAN1_MB27_DATA0() bfin_read16(CAN1_MB27_DATA0) +#define bfin_write_CAN1_MB27_DATA0(val) bfin_write16(CAN1_MB27_DATA0, val) +#define bfin_read_CAN1_MB27_DATA1() bfin_read16(CAN1_MB27_DATA1) +#define bfin_write_CAN1_MB27_DATA1(val) bfin_write16(CAN1_MB27_DATA1, val) +#define bfin_read_CAN1_MB27_DATA2() bfin_read16(CAN1_MB27_DATA2) +#define bfin_write_CAN1_MB27_DATA2(val) bfin_write16(CAN1_MB27_DATA2, val) +#define bfin_read_CAN1_MB27_DATA3() bfin_read16(CAN1_MB27_DATA3) +#define bfin_write_CAN1_MB27_DATA3(val) bfin_write16(CAN1_MB27_DATA3, val) +#define bfin_read_CAN1_MB27_LENGTH() bfin_read16(CAN1_MB27_LENGTH) +#define bfin_write_CAN1_MB27_LENGTH(val) bfin_write16(CAN1_MB27_LENGTH, val) +#define bfin_read_CAN1_MB27_TIMESTAMP() bfin_read16(CAN1_MB27_TIMESTAMP) +#define bfin_write_CAN1_MB27_TIMESTAMP(val) bfin_write16(CAN1_MB27_TIMESTAMP, val) +#define bfin_read_CAN1_MB27_ID0() bfin_read16(CAN1_MB27_ID0) +#define bfin_write_CAN1_MB27_ID0(val) bfin_write16(CAN1_MB27_ID0, val) +#define bfin_read_CAN1_MB27_ID1() bfin_read16(CAN1_MB27_ID1) +#define bfin_write_CAN1_MB27_ID1(val) bfin_write16(CAN1_MB27_ID1, val) +#define bfin_read_CAN1_MB28_DATA0() bfin_read16(CAN1_MB28_DATA0) +#define bfin_write_CAN1_MB28_DATA0(val) bfin_write16(CAN1_MB28_DATA0, val) +#define bfin_read_CAN1_MB28_DATA1() bfin_read16(CAN1_MB28_DATA1) +#define bfin_write_CAN1_MB28_DATA1(val) bfin_write16(CAN1_MB28_DATA1, val) +#define bfin_read_CAN1_MB28_DATA2() bfin_read16(CAN1_MB28_DATA2) +#define bfin_write_CAN1_MB28_DATA2(val) bfin_write16(CAN1_MB28_DATA2, val) +#define bfin_read_CAN1_MB28_DATA3() bfin_read16(CAN1_MB28_DATA3) +#define bfin_write_CAN1_MB28_DATA3(val) bfin_write16(CAN1_MB28_DATA3, val) +#define bfin_read_CAN1_MB28_LENGTH() bfin_read16(CAN1_MB28_LENGTH) +#define bfin_write_CAN1_MB28_LENGTH(val) bfin_write16(CAN1_MB28_LENGTH, val) +#define bfin_read_CAN1_MB28_TIMESTAMP() bfin_read16(CAN1_MB28_TIMESTAMP) +#define bfin_write_CAN1_MB28_TIMESTAMP(val) bfin_write16(CAN1_MB28_TIMESTAMP, val) +#define bfin_read_CAN1_MB28_ID0() bfin_read16(CAN1_MB28_ID0) +#define bfin_write_CAN1_MB28_ID0(val) bfin_write16(CAN1_MB28_ID0, val) +#define bfin_read_CAN1_MB28_ID1() bfin_read16(CAN1_MB28_ID1) +#define bfin_write_CAN1_MB28_ID1(val) bfin_write16(CAN1_MB28_ID1, val) +#define bfin_read_CAN1_MB29_DATA0() bfin_read16(CAN1_MB29_DATA0) +#define bfin_write_CAN1_MB29_DATA0(val) bfin_write16(CAN1_MB29_DATA0, val) +#define bfin_read_CAN1_MB29_DATA1() bfin_read16(CAN1_MB29_DATA1) +#define bfin_write_CAN1_MB29_DATA1(val) bfin_write16(CAN1_MB29_DATA1, val) +#define bfin_read_CAN1_MB29_DATA2() bfin_read16(CAN1_MB29_DATA2) +#define bfin_write_CAN1_MB29_DATA2(val) bfin_write16(CAN1_MB29_DATA2, val) +#define bfin_read_CAN1_MB29_DATA3() bfin_read16(CAN1_MB29_DATA3) +#define bfin_write_CAN1_MB29_DATA3(val) bfin_write16(CAN1_MB29_DATA3, val) +#define bfin_read_CAN1_MB29_LENGTH() bfin_read16(CAN1_MB29_LENGTH) +#define bfin_write_CAN1_MB29_LENGTH(val) bfin_write16(CAN1_MB29_LENGTH, val) +#define bfin_read_CAN1_MB29_TIMESTAMP() bfin_read16(CAN1_MB29_TIMESTAMP) +#define bfin_write_CAN1_MB29_TIMESTAMP(val) bfin_write16(CAN1_MB29_TIMESTAMP, val) +#define bfin_read_CAN1_MB29_ID0() bfin_read16(CAN1_MB29_ID0) +#define bfin_write_CAN1_MB29_ID0(val) bfin_write16(CAN1_MB29_ID0, val) +#define bfin_read_CAN1_MB29_ID1() bfin_read16(CAN1_MB29_ID1) +#define bfin_write_CAN1_MB29_ID1(val) bfin_write16(CAN1_MB29_ID1, val) +#define bfin_read_CAN1_MB30_DATA0() bfin_read16(CAN1_MB30_DATA0) +#define bfin_write_CAN1_MB30_DATA0(val) bfin_write16(CAN1_MB30_DATA0, val) +#define bfin_read_CAN1_MB30_DATA1() bfin_read16(CAN1_MB30_DATA1) +#define bfin_write_CAN1_MB30_DATA1(val) bfin_write16(CAN1_MB30_DATA1, val) +#define bfin_read_CAN1_MB30_DATA2() bfin_read16(CAN1_MB30_DATA2) +#define bfin_write_CAN1_MB30_DATA2(val) bfin_write16(CAN1_MB30_DATA2, val) +#define bfin_read_CAN1_MB30_DATA3() bfin_read16(CAN1_MB30_DATA3) +#define bfin_write_CAN1_MB30_DATA3(val) bfin_write16(CAN1_MB30_DATA3, val) +#define bfin_read_CAN1_MB30_LENGTH() bfin_read16(CAN1_MB30_LENGTH) +#define bfin_write_CAN1_MB30_LENGTH(val) bfin_write16(CAN1_MB30_LENGTH, val) +#define bfin_read_CAN1_MB30_TIMESTAMP() bfin_read16(CAN1_MB30_TIMESTAMP) +#define bfin_write_CAN1_MB30_TIMESTAMP(val) bfin_write16(CAN1_MB30_TIMESTAMP, val) +#define bfin_read_CAN1_MB30_ID0() bfin_read16(CAN1_MB30_ID0) +#define bfin_write_CAN1_MB30_ID0(val) bfin_write16(CAN1_MB30_ID0, val) +#define bfin_read_CAN1_MB30_ID1() bfin_read16(CAN1_MB30_ID1) +#define bfin_write_CAN1_MB30_ID1(val) bfin_write16(CAN1_MB30_ID1, val) +#define bfin_read_CAN1_MB31_DATA0() bfin_read16(CAN1_MB31_DATA0) +#define bfin_write_CAN1_MB31_DATA0(val) bfin_write16(CAN1_MB31_DATA0, val) +#define bfin_read_CAN1_MB31_DATA1() bfin_read16(CAN1_MB31_DATA1) +#define bfin_write_CAN1_MB31_DATA1(val) bfin_write16(CAN1_MB31_DATA1, val) +#define bfin_read_CAN1_MB31_DATA2() bfin_read16(CAN1_MB31_DATA2) +#define bfin_write_CAN1_MB31_DATA2(val) bfin_write16(CAN1_MB31_DATA2, val) +#define bfin_read_CAN1_MB31_DATA3() bfin_read16(CAN1_MB31_DATA3) +#define bfin_write_CAN1_MB31_DATA3(val) bfin_write16(CAN1_MB31_DATA3, val) +#define bfin_read_CAN1_MB31_LENGTH() bfin_read16(CAN1_MB31_LENGTH) +#define bfin_write_CAN1_MB31_LENGTH(val) bfin_write16(CAN1_MB31_LENGTH, val) +#define bfin_read_CAN1_MB31_TIMESTAMP() bfin_read16(CAN1_MB31_TIMESTAMP) +#define bfin_write_CAN1_MB31_TIMESTAMP(val) bfin_write16(CAN1_MB31_TIMESTAMP, val) +#define bfin_read_CAN1_MB31_ID0() bfin_read16(CAN1_MB31_ID0) +#define bfin_write_CAN1_MB31_ID0(val) bfin_write16(CAN1_MB31_ID0, val) +#define bfin_read_CAN1_MB31_ID1() bfin_read16(CAN1_MB31_ID1) +#define bfin_write_CAN1_MB31_ID1(val) bfin_write16(CAN1_MB31_ID1, val) + +/* ATAPI Registers */ + +#define bfin_read_ATAPI_CONTROL() bfin_read16(ATAPI_CONTROL) +#define bfin_write_ATAPI_CONTROL(val) bfin_write16(ATAPI_CONTROL, val) +#define bfin_read_ATAPI_STATUS() bfin_read16(ATAPI_STATUS) +#define bfin_write_ATAPI_STATUS(val) bfin_write16(ATAPI_STATUS, val) +#define bfin_read_ATAPI_DEV_ADDR() bfin_read16(ATAPI_DEV_ADDR) +#define bfin_write_ATAPI_DEV_ADDR(val) bfin_write16(ATAPI_DEV_ADDR, val) +#define bfin_read_ATAPI_DEV_TXBUF() bfin_read16(ATAPI_DEV_TXBUF) +#define bfin_write_ATAPI_DEV_TXBUF(val) bfin_write16(ATAPI_DEV_TXBUF, val) +#define bfin_read_ATAPI_DEV_RXBUF() bfin_read16(ATAPI_DEV_RXBUF) +#define bfin_write_ATAPI_DEV_RXBUF(val) bfin_write16(ATAPI_DEV_RXBUF, val) +#define bfin_read_ATAPI_INT_MASK() bfin_read16(ATAPI_INT_MASK) +#define bfin_write_ATAPI_INT_MASK(val) bfin_write16(ATAPI_INT_MASK, val) +#define bfin_read_ATAPI_INT_STATUS() bfin_read16(ATAPI_INT_STATUS) +#define bfin_write_ATAPI_INT_STATUS(val) bfin_write16(ATAPI_INT_STATUS, val) +#define bfin_read_ATAPI_XFER_LEN() bfin_read16(ATAPI_XFER_LEN) +#define bfin_write_ATAPI_XFER_LEN(val) bfin_write16(ATAPI_XFER_LEN, val) +#define bfin_read_ATAPI_LINE_STATUS() bfin_read16(ATAPI_LINE_STATUS) +#define bfin_write_ATAPI_LINE_STATUS(val) bfin_write16(ATAPI_LINE_STATUS, val) +#define bfin_read_ATAPI_SM_STATE() bfin_read16(ATAPI_SM_STATE) +#define bfin_write_ATAPI_SM_STATE(val) bfin_write16(ATAPI_SM_STATE, val) +#define bfin_read_ATAPI_TERMINATE() bfin_read16(ATAPI_TERMINATE) +#define bfin_write_ATAPI_TERMINATE(val) bfin_write16(ATAPI_TERMINATE, val) +#define bfin_read_ATAPI_PIO_TFRCNT() bfin_read16(ATAPI_PIO_TFRCNT) +#define bfin_write_ATAPI_PIO_TFRCNT(val) bfin_write16(ATAPI_PIO_TFRCNT, val) +#define bfin_read_ATAPI_DMA_TFRCNT() bfin_read16(ATAPI_DMA_TFRCNT) +#define bfin_write_ATAPI_DMA_TFRCNT(val) bfin_write16(ATAPI_DMA_TFRCNT, val) +#define bfin_read_ATAPI_UMAIN_TFRCNT() bfin_read16(ATAPI_UMAIN_TFRCNT) +#define bfin_write_ATAPI_UMAIN_TFRCNT(val) bfin_write16(ATAPI_UMAIN_TFRCNT, val) +#define bfin_read_ATAPI_UDMAOUT_TFRCNT() bfin_read16(ATAPI_UDMAOUT_TFRCNT) +#define bfin_write_ATAPI_UDMAOUT_TFRCNT(val) bfin_write16(ATAPI_UDMAOUT_TFRCNT, val) +#define bfin_read_ATAPI_REG_TIM_0() bfin_read16(ATAPI_REG_TIM_0) +#define bfin_write_ATAPI_REG_TIM_0(val) bfin_write16(ATAPI_REG_TIM_0, val) +#define bfin_read_ATAPI_PIO_TIM_0() bfin_read16(ATAPI_PIO_TIM_0) +#define bfin_write_ATAPI_PIO_TIM_0(val) bfin_write16(ATAPI_PIO_TIM_0, val) +#define bfin_read_ATAPI_PIO_TIM_1() bfin_read16(ATAPI_PIO_TIM_1) +#define bfin_write_ATAPI_PIO_TIM_1(val) bfin_write16(ATAPI_PIO_TIM_1, val) +#define bfin_read_ATAPI_MULTI_TIM_0() bfin_read16(ATAPI_MULTI_TIM_0) +#define bfin_write_ATAPI_MULTI_TIM_0(val) bfin_write16(ATAPI_MULTI_TIM_0, val) +#define bfin_read_ATAPI_MULTI_TIM_1() bfin_read16(ATAPI_MULTI_TIM_1) +#define bfin_write_ATAPI_MULTI_TIM_1(val) bfin_write16(ATAPI_MULTI_TIM_1, val) +#define bfin_read_ATAPI_MULTI_TIM_2() bfin_read16(ATAPI_MULTI_TIM_2) +#define bfin_write_ATAPI_MULTI_TIM_2(val) bfin_write16(ATAPI_MULTI_TIM_2, val) +#define bfin_read_ATAPI_ULTRA_TIM_0() bfin_read16(ATAPI_ULTRA_TIM_0) +#define bfin_write_ATAPI_ULTRA_TIM_0(val) bfin_write16(ATAPI_ULTRA_TIM_0, val) +#define bfin_read_ATAPI_ULTRA_TIM_1() bfin_read16(ATAPI_ULTRA_TIM_1) +#define bfin_write_ATAPI_ULTRA_TIM_1(val) bfin_write16(ATAPI_ULTRA_TIM_1, val) +#define bfin_read_ATAPI_ULTRA_TIM_2() bfin_read16(ATAPI_ULTRA_TIM_2) +#define bfin_write_ATAPI_ULTRA_TIM_2(val) bfin_write16(ATAPI_ULTRA_TIM_2, val) +#define bfin_read_ATAPI_ULTRA_TIM_3() bfin_read16(ATAPI_ULTRA_TIM_3) +#define bfin_write_ATAPI_ULTRA_TIM_3(val) bfin_write16(ATAPI_ULTRA_TIM_3, val) + +/* SDH Registers */ + +#define bfin_read_SDH_PWR_CTL() bfin_read16(SDH_PWR_CTL) +#define bfin_write_SDH_PWR_CTL(val) bfin_write16(SDH_PWR_CTL, val) +#define bfin_read_SDH_CLK_CTL() bfin_read16(SDH_CLK_CTL) +#define bfin_write_SDH_CLK_CTL(val) bfin_write16(SDH_CLK_CTL, val) +#define bfin_read_SDH_ARGUMENT() bfin_read32(SDH_ARGUMENT) +#define bfin_write_SDH_ARGUMENT(val) bfin_write32(SDH_ARGUMENT, val) +#define bfin_read_SDH_COMMAND() bfin_read16(SDH_COMMAND) +#define bfin_write_SDH_COMMAND(val) bfin_write16(SDH_COMMAND, val) +#define bfin_read_SDH_RESP_CMD() bfin_read16(SDH_RESP_CMD) +#define bfin_write_SDH_RESP_CMD(val) bfin_write16(SDH_RESP_CMD, val) +#define bfin_read_SDH_RESPONSE0() bfin_read32(SDH_RESPONSE0) +#define bfin_write_SDH_RESPONSE0(val) bfin_write32(SDH_RESPONSE0, val) +#define bfin_read_SDH_RESPONSE1() bfin_read32(SDH_RESPONSE1) +#define bfin_write_SDH_RESPONSE1(val) bfin_write32(SDH_RESPONSE1, val) +#define bfin_read_SDH_RESPONSE2() bfin_read32(SDH_RESPONSE2) +#define bfin_write_SDH_RESPONSE2(val) bfin_write32(SDH_RESPONSE2, val) +#define bfin_read_SDH_RESPONSE3() bfin_read32(SDH_RESPONSE3) +#define bfin_write_SDH_RESPONSE3(val) bfin_write32(SDH_RESPONSE3, val) +#define bfin_read_SDH_DATA_TIMER() bfin_read32(SDH_DATA_TIMER) +#define bfin_write_SDH_DATA_TIMER(val) bfin_write32(SDH_DATA_TIMER, val) +#define bfin_read_SDH_DATA_LGTH() bfin_read16(SDH_DATA_LGTH) +#define bfin_write_SDH_DATA_LGTH(val) bfin_write16(SDH_DATA_LGTH, val) +#define bfin_read_SDH_DATA_CTL() bfin_read16(SDH_DATA_CTL) +#define bfin_write_SDH_DATA_CTL(val) bfin_write16(SDH_DATA_CTL, val) +#define bfin_read_SDH_DATA_CNT() bfin_read16(SDH_DATA_CNT) +#define bfin_write_SDH_DATA_CNT(val) bfin_write16(SDH_DATA_CNT, val) +#define bfin_read_SDH_STATUS() bfin_read32(SDH_STATUS) +#define bfin_write_SDH_STATUS(val) bfin_write32(SDH_STATUS, val) +#define bfin_read_SDH_STATUS_CLR() bfin_read16(SDH_STATUS_CLR) +#define bfin_write_SDH_STATUS_CLR(val) bfin_write16(SDH_STATUS_CLR, val) +#define bfin_read_SDH_MASK0() bfin_read32(SDH_MASK0) +#define bfin_write_SDH_MASK0(val) bfin_write32(SDH_MASK0, val) +#define bfin_read_SDH_MASK1() bfin_read32(SDH_MASK1) +#define bfin_write_SDH_MASK1(val) bfin_write32(SDH_MASK1, val) +#define bfin_read_SDH_FIFO_CNT() bfin_read16(SDH_FIFO_CNT) +#define bfin_write_SDH_FIFO_CNT(val) bfin_write16(SDH_FIFO_CNT, val) +#define bfin_read_SDH_FIFO() bfin_read32(SDH_FIFO) +#define bfin_write_SDH_FIFO(val) bfin_write32(SDH_FIFO, val) +#define bfin_read_SDH_E_STATUS() bfin_read16(SDH_E_STATUS) +#define bfin_write_SDH_E_STATUS(val) bfin_write16(SDH_E_STATUS, val) +#define bfin_read_SDH_E_MASK() bfin_read16(SDH_E_MASK) +#define bfin_write_SDH_E_MASK(val) bfin_write16(SDH_E_MASK, val) +#define bfin_read_SDH_CFG() bfin_read16(SDH_CFG) +#define bfin_write_SDH_CFG(val) bfin_write16(SDH_CFG, val) +#define bfin_read_SDH_RD_WAIT_EN() bfin_read16(SDH_RD_WAIT_EN) +#define bfin_write_SDH_RD_WAIT_EN(val) bfin_write16(SDH_RD_WAIT_EN, val) +#define bfin_read_SDH_PID0() bfin_read16(SDH_PID0) +#define bfin_write_SDH_PID0(val) bfin_write16(SDH_PID0, val) +#define bfin_read_SDH_PID1() bfin_read16(SDH_PID1) +#define bfin_write_SDH_PID1(val) bfin_write16(SDH_PID1, val) +#define bfin_read_SDH_PID2() bfin_read16(SDH_PID2) +#define bfin_write_SDH_PID2(val) bfin_write16(SDH_PID2, val) +#define bfin_read_SDH_PID3() bfin_read16(SDH_PID3) +#define bfin_write_SDH_PID3(val) bfin_write16(SDH_PID3, val) +#define bfin_read_SDH_PID4() bfin_read16(SDH_PID4) +#define bfin_write_SDH_PID4(val) bfin_write16(SDH_PID4, val) +#define bfin_read_SDH_PID5() bfin_read16(SDH_PID5) +#define bfin_write_SDH_PID5(val) bfin_write16(SDH_PID5, val) +#define bfin_read_SDH_PID6() bfin_read16(SDH_PID6) +#define bfin_write_SDH_PID6(val) bfin_write16(SDH_PID6, val) +#define bfin_read_SDH_PID7() bfin_read16(SDH_PID7) +#define bfin_write_SDH_PID7(val) bfin_write16(SDH_PID7, val) + +/* HOST Port Registers */ + +#define bfin_read_HOST_CONTROL() bfin_read16(HOST_CONTROL) +#define bfin_write_HOST_CONTROL(val) bfin_write16(HOST_CONTROL, val) +#define bfin_read_HOST_STATUS() bfin_read16(HOST_STATUS) +#define bfin_write_HOST_STATUS(val) bfin_write16(HOST_STATUS, val) +#define bfin_read_HOST_TIMEOUT() bfin_read16(HOST_TIMEOUT) +#define bfin_write_HOST_TIMEOUT(val) bfin_write16(HOST_TIMEOUT, val) + +/* USB Control Registers */ + +#define bfin_read_USB_FADDR() bfin_read16(USB_FADDR) +#define bfin_write_USB_FADDR(val) bfin_write16(USB_FADDR, val) +#define bfin_read_USB_POWER() bfin_read16(USB_POWER) +#define bfin_write_USB_POWER(val) bfin_write16(USB_POWER, val) +#define bfin_read_USB_INTRTX() bfin_read16(USB_INTRTX) +#define bfin_write_USB_INTRTX(val) bfin_write16(USB_INTRTX, val) +#define bfin_read_USB_INTRRX() bfin_read16(USB_INTRRX) +#define bfin_write_USB_INTRRX(val) bfin_write16(USB_INTRRX, val) +#define bfin_read_USB_INTRTXE() bfin_read16(USB_INTRTXE) +#define bfin_write_USB_INTRTXE(val) bfin_write16(USB_INTRTXE, val) +#define bfin_read_USB_INTRRXE() bfin_read16(USB_INTRRXE) +#define bfin_write_USB_INTRRXE(val) bfin_write16(USB_INTRRXE, val) +#define bfin_read_USB_INTRUSB() bfin_read16(USB_INTRUSB) +#define bfin_write_USB_INTRUSB(val) bfin_write16(USB_INTRUSB, val) +#define bfin_read_USB_INTRUSBE() bfin_read16(USB_INTRUSBE) +#define bfin_write_USB_INTRUSBE(val) bfin_write16(USB_INTRUSBE, val) +#define bfin_read_USB_FRAME() bfin_read16(USB_FRAME) +#define bfin_write_USB_FRAME(val) bfin_write16(USB_FRAME, val) +#define bfin_read_USB_INDEX() bfin_read16(USB_INDEX) +#define bfin_write_USB_INDEX(val) bfin_write16(USB_INDEX, val) +#define bfin_read_USB_TESTMODE() bfin_read16(USB_TESTMODE) +#define bfin_write_USB_TESTMODE(val) bfin_write16(USB_TESTMODE, val) +#define bfin_read_USB_GLOBINTR() bfin_read16(USB_GLOBINTR) +#define bfin_write_USB_GLOBINTR(val) bfin_write16(USB_GLOBINTR, val) +#define bfin_read_USB_GLOBAL_CTL() bfin_read16(USB_GLOBAL_CTL) +#define bfin_write_USB_GLOBAL_CTL(val) bfin_write16(USB_GLOBAL_CTL, val) + +/* USB Packet Control Registers */ + +#define bfin_read_USB_TX_MAX_PACKET() bfin_read16(USB_TX_MAX_PACKET) +#define bfin_write_USB_TX_MAX_PACKET(val) bfin_write16(USB_TX_MAX_PACKET, val) +#define bfin_read_USB_CSR0() bfin_read16(USB_CSR0) +#define bfin_write_USB_CSR0(val) bfin_write16(USB_CSR0, val) +#define bfin_read_USB_TXCSR() bfin_read16(USB_TXCSR) +#define bfin_write_USB_TXCSR(val) bfin_write16(USB_TXCSR, val) +#define bfin_read_USB_RX_MAX_PACKET() bfin_read16(USB_RX_MAX_PACKET) +#define bfin_write_USB_RX_MAX_PACKET(val) bfin_write16(USB_RX_MAX_PACKET, val) +#define bfin_read_USB_RXCSR() bfin_read16(USB_RXCSR) +#define bfin_write_USB_RXCSR(val) bfin_write16(USB_RXCSR, val) +#define bfin_read_USB_COUNT0() bfin_read16(USB_COUNT0) +#define bfin_write_USB_COUNT0(val) bfin_write16(USB_COUNT0, val) +#define bfin_read_USB_RXCOUNT() bfin_read16(USB_RXCOUNT) +#define bfin_write_USB_RXCOUNT(val) bfin_write16(USB_RXCOUNT, val) +#define bfin_read_USB_TXTYPE() bfin_read16(USB_TXTYPE) +#define bfin_write_USB_TXTYPE(val) bfin_write16(USB_TXTYPE, val) +#define bfin_read_USB_NAKLIMIT0() bfin_read16(USB_NAKLIMIT0) +#define bfin_write_USB_NAKLIMIT0(val) bfin_write16(USB_NAKLIMIT0, val) +#define bfin_read_USB_TXINTERVAL() bfin_read16(USB_TXINTERVAL) +#define bfin_write_USB_TXINTERVAL(val) bfin_write16(USB_TXINTERVAL, val) +#define bfin_read_USB_RXTYPE() bfin_read16(USB_RXTYPE) +#define bfin_write_USB_RXTYPE(val) bfin_write16(USB_RXTYPE, val) +#define bfin_read_USB_RXINTERVAL() bfin_read16(USB_RXINTERVAL) +#define bfin_write_USB_RXINTERVAL(val) bfin_write16(USB_RXINTERVAL, val) +#define bfin_read_USB_TXCOUNT() bfin_read16(USB_TXCOUNT) +#define bfin_write_USB_TXCOUNT(val) bfin_write16(USB_TXCOUNT, val) + +/* USB Endbfin_read_()oint FIFO Registers */ + +#define bfin_read_USB_EP0_FIFO() bfin_read16(USB_EP0_FIFO) +#define bfin_write_USB_EP0_FIFO(val) bfin_write16(USB_EP0_FIFO, val) +#define bfin_read_USB_EP1_FIFO() bfin_read16(USB_EP1_FIFO) +#define bfin_write_USB_EP1_FIFO(val) bfin_write16(USB_EP1_FIFO, val) +#define bfin_read_USB_EP2_FIFO() bfin_read16(USB_EP2_FIFO) +#define bfin_write_USB_EP2_FIFO(val) bfin_write16(USB_EP2_FIFO, val) +#define bfin_read_USB_EP3_FIFO() bfin_read16(USB_EP3_FIFO) +#define bfin_write_USB_EP3_FIFO(val) bfin_write16(USB_EP3_FIFO, val) +#define bfin_read_USB_EP4_FIFO() bfin_read16(USB_EP4_FIFO) +#define bfin_write_USB_EP4_FIFO(val) bfin_write16(USB_EP4_FIFO, val) +#define bfin_read_USB_EP5_FIFO() bfin_read16(USB_EP5_FIFO) +#define bfin_write_USB_EP5_FIFO(val) bfin_write16(USB_EP5_FIFO, val) +#define bfin_read_USB_EP6_FIFO() bfin_read16(USB_EP6_FIFO) +#define bfin_write_USB_EP6_FIFO(val) bfin_write16(USB_EP6_FIFO, val) +#define bfin_read_USB_EP7_FIFO() bfin_read16(USB_EP7_FIFO) +#define bfin_write_USB_EP7_FIFO(val) bfin_write16(USB_EP7_FIFO, val) + +/* USB OTG Control Registers */ + +#define bfin_read_USB_OTG_DEV_CTL() bfin_read16(USB_OTG_DEV_CTL) +#define bfin_write_USB_OTG_DEV_CTL(val) bfin_write16(USB_OTG_DEV_CTL, val) +#define bfin_read_USB_OTG_VBUS_IRQ() bfin_read16(USB_OTG_VBUS_IRQ) +#define bfin_write_USB_OTG_VBUS_IRQ(val) bfin_write16(USB_OTG_VBUS_IRQ, val) +#define bfin_read_USB_OTG_VBUS_MASK() bfin_read16(USB_OTG_VBUS_MASK) +#define bfin_write_USB_OTG_VBUS_MASK(val) bfin_write16(USB_OTG_VBUS_MASK, val) + +/* USB Phy Control Registers */ + +#define bfin_read_USB_LINKINFO() bfin_read16(USB_LINKINFO) +#define bfin_write_USB_LINKINFO(val) bfin_write16(USB_LINKINFO, val) +#define bfin_read_USB_VPLEN() bfin_read16(USB_VPLEN) +#define bfin_write_USB_VPLEN(val) bfin_write16(USB_VPLEN, val) +#define bfin_read_USB_HS_EOF1() bfin_read16(USB_HS_EOF1) +#define bfin_write_USB_HS_EOF1(val) bfin_write16(USB_HS_EOF1, val) +#define bfin_read_USB_FS_EOF1() bfin_read16(USB_FS_EOF1) +#define bfin_write_USB_FS_EOF1(val) bfin_write16(USB_FS_EOF1, val) +#define bfin_read_USB_LS_EOF1() bfin_read16(USB_LS_EOF1) +#define bfin_write_USB_LS_EOF1(val) bfin_write16(USB_LS_EOF1, val) + +/* (APHY_CNTRL is for ADI usage only) */ + +#define bfin_read_USB_APHY_CNTRL() bfin_read16(USB_APHY_CNTRL) +#define bfin_write_USB_APHY_CNTRL(val) bfin_write16(USB_APHY_CNTRL, val) + +/* (APHY_CALIB is for ADI usage only) */ + +#define bfin_read_USB_APHY_CALIB() bfin_read16(USB_APHY_CALIB) +#define bfin_write_USB_APHY_CALIB(val) bfin_write16(USB_APHY_CALIB, val) +#define bfin_read_USB_APHY_CNTRL2() bfin_read16(USB_APHY_CNTRL2) +#define bfin_write_USB_APHY_CNTRL2(val) bfin_write16(USB_APHY_CNTRL2, val) + +/* (PHY_TEST is for ADI usage only) */ + +#define bfin_read_USB_PHY_TEST() bfin_read16(USB_PHY_TEST) +#define bfin_write_USB_PHY_TEST(val) bfin_write16(USB_PHY_TEST, val) +#define bfin_read_USB_PLLOSC_CTRL() bfin_read16(USB_PLLOSC_CTRL) +#define bfin_write_USB_PLLOSC_CTRL(val) bfin_write16(USB_PLLOSC_CTRL, val) +#define bfin_read_USB_SRP_CLKDIV() bfin_read16(USB_SRP_CLKDIV) +#define bfin_write_USB_SRP_CLKDIV(val) bfin_write16(USB_SRP_CLKDIV, val) + +/* USB Endbfin_read_()oint 0 Control Registers */ + +#define bfin_read_USB_EP_NI0_TXMAXP() bfin_read16(USB_EP_NI0_TXMAXP) +#define bfin_write_USB_EP_NI0_TXMAXP(val) bfin_write16(USB_EP_NI0_TXMAXP, val) +#define bfin_read_USB_EP_NI0_TXCSR() bfin_read16(USB_EP_NI0_TXCSR) +#define bfin_write_USB_EP_NI0_TXCSR(val) bfin_write16(USB_EP_NI0_TXCSR, val) +#define bfin_read_USB_EP_NI0_RXMAXP() bfin_read16(USB_EP_NI0_RXMAXP) +#define bfin_write_USB_EP_NI0_RXMAXP(val) bfin_write16(USB_EP_NI0_RXMAXP, val) +#define bfin_read_USB_EP_NI0_RXCSR() bfin_read16(USB_EP_NI0_RXCSR) +#define bfin_write_USB_EP_NI0_RXCSR(val) bfin_write16(USB_EP_NI0_RXCSR, val) +#define bfin_read_USB_EP_NI0_RXCOUNT() bfin_read16(USB_EP_NI0_RXCOUNT) +#define bfin_write_USB_EP_NI0_RXCOUNT(val) bfin_write16(USB_EP_NI0_RXCOUNT, val) +#define bfin_read_USB_EP_NI0_TXTYPE() bfin_read16(USB_EP_NI0_TXTYPE) +#define bfin_write_USB_EP_NI0_TXTYPE(val) bfin_write16(USB_EP_NI0_TXTYPE, val) +#define bfin_read_USB_EP_NI0_TXINTERVAL() bfin_read16(USB_EP_NI0_TXINTERVAL) +#define bfin_write_USB_EP_NI0_TXINTERVAL(val) bfin_write16(USB_EP_NI0_TXINTERVAL, val) +#define bfin_read_USB_EP_NI0_RXTYPE() bfin_read16(USB_EP_NI0_RXTYPE) +#define bfin_write_USB_EP_NI0_RXTYPE(val) bfin_write16(USB_EP_NI0_RXTYPE, val) +#define bfin_read_USB_EP_NI0_RXINTERVAL() bfin_read16(USB_EP_NI0_RXINTERVAL) +#define bfin_write_USB_EP_NI0_RXINTERVAL(val) bfin_write16(USB_EP_NI0_RXINTERVAL, val) + +/* USB Endbfin_read_()oint 1 Control Registers */ + +#define bfin_read_USB_EP_NI0_TXCOUNT() bfin_read16(USB_EP_NI0_TXCOUNT) +#define bfin_write_USB_EP_NI0_TXCOUNT(val) bfin_write16(USB_EP_NI0_TXCOUNT, val) +#define bfin_read_USB_EP_NI1_TXMAXP() bfin_read16(USB_EP_NI1_TXMAXP) +#define bfin_write_USB_EP_NI1_TXMAXP(val) bfin_write16(USB_EP_NI1_TXMAXP, val) +#define bfin_read_USB_EP_NI1_TXCSR() bfin_read16(USB_EP_NI1_TXCSR) +#define bfin_write_USB_EP_NI1_TXCSR(val) bfin_write16(USB_EP_NI1_TXCSR, val) +#define bfin_read_USB_EP_NI1_RXMAXP() bfin_read16(USB_EP_NI1_RXMAXP) +#define bfin_write_USB_EP_NI1_RXMAXP(val) bfin_write16(USB_EP_NI1_RXMAXP, val) +#define bfin_read_USB_EP_NI1_RXCSR() bfin_read16(USB_EP_NI1_RXCSR) +#define bfin_write_USB_EP_NI1_RXCSR(val) bfin_write16(USB_EP_NI1_RXCSR, val) +#define bfin_read_USB_EP_NI1_RXCOUNT() bfin_read16(USB_EP_NI1_RXCOUNT) +#define bfin_write_USB_EP_NI1_RXCOUNT(val) bfin_write16(USB_EP_NI1_RXCOUNT, val) +#define bfin_read_USB_EP_NI1_TXTYPE() bfin_read16(USB_EP_NI1_TXTYPE) +#define bfin_write_USB_EP_NI1_TXTYPE(val) bfin_write16(USB_EP_NI1_TXTYPE, val) +#define bfin_read_USB_EP_NI1_TXINTERVAL() bfin_read16(USB_EP_NI1_TXINTERVAL) +#define bfin_write_USB_EP_NI1_TXINTERVAL(val) bfin_write16(USB_EP_NI1_TXINTERVAL, val) +#define bfin_read_USB_EP_NI1_RXTYPE() bfin_read16(USB_EP_NI1_RXTYPE) +#define bfin_write_USB_EP_NI1_RXTYPE(val) bfin_write16(USB_EP_NI1_RXTYPE, val) +#define bfin_read_USB_EP_NI1_RXINTERVAL() bfin_read16(USB_EP_NI1_RXINTERVAL) +#define bfin_write_USB_EP_NI1_RXINTERVAL(val) bfin_write16(USB_EP_NI1_RXINTERVAL, val) + +/* USB Endbfin_read_()oint 2 Control Registers */ + +#define bfin_read_USB_EP_NI1_TXCOUNT() bfin_read16(USB_EP_NI1_TXCOUNT) +#define bfin_write_USB_EP_NI1_TXCOUNT(val) bfin_write16(USB_EP_NI1_TXCOUNT, val) +#define bfin_read_USB_EP_NI2_TXMAXP() bfin_read16(USB_EP_NI2_TXMAXP) +#define bfin_write_USB_EP_NI2_TXMAXP(val) bfin_write16(USB_EP_NI2_TXMAXP, val) +#define bfin_read_USB_EP_NI2_TXCSR() bfin_read16(USB_EP_NI2_TXCSR) +#define bfin_write_USB_EP_NI2_TXCSR(val) bfin_write16(USB_EP_NI2_TXCSR, val) +#define bfin_read_USB_EP_NI2_RXMAXP() bfin_read16(USB_EP_NI2_RXMAXP) +#define bfin_write_USB_EP_NI2_RXMAXP(val) bfin_write16(USB_EP_NI2_RXMAXP, val) +#define bfin_read_USB_EP_NI2_RXCSR() bfin_read16(USB_EP_NI2_RXCSR) +#define bfin_write_USB_EP_NI2_RXCSR(val) bfin_write16(USB_EP_NI2_RXCSR, val) +#define bfin_read_USB_EP_NI2_RXCOUNT() bfin_read16(USB_EP_NI2_RXCOUNT) +#define bfin_write_USB_EP_NI2_RXCOUNT(val) bfin_write16(USB_EP_NI2_RXCOUNT, val) +#define bfin_read_USB_EP_NI2_TXTYPE() bfin_read16(USB_EP_NI2_TXTYPE) +#define bfin_write_USB_EP_NI2_TXTYPE(val) bfin_write16(USB_EP_NI2_TXTYPE, val) +#define bfin_read_USB_EP_NI2_TXINTERVAL() bfin_read16(USB_EP_NI2_TXINTERVAL) +#define bfin_write_USB_EP_NI2_TXINTERVAL(val) bfin_write16(USB_EP_NI2_TXINTERVAL, val) +#define bfin_read_USB_EP_NI2_RXTYPE() bfin_read16(USB_EP_NI2_RXTYPE) +#define bfin_write_USB_EP_NI2_RXTYPE(val) bfin_write16(USB_EP_NI2_RXTYPE, val) +#define bfin_read_USB_EP_NI2_RXINTERVAL() bfin_read16(USB_EP_NI2_RXINTERVAL) +#define bfin_write_USB_EP_NI2_RXINTERVAL(val) bfin_write16(USB_EP_NI2_RXINTERVAL, val) + +/* USB Endbfin_read_()oint 3 Control Registers */ + +#define bfin_read_USB_EP_NI2_TXCOUNT() bfin_read16(USB_EP_NI2_TXCOUNT) +#define bfin_write_USB_EP_NI2_TXCOUNT(val) bfin_write16(USB_EP_NI2_TXCOUNT, val) +#define bfin_read_USB_EP_NI3_TXMAXP() bfin_read16(USB_EP_NI3_TXMAXP) +#define bfin_write_USB_EP_NI3_TXMAXP(val) bfin_write16(USB_EP_NI3_TXMAXP, val) +#define bfin_read_USB_EP_NI3_TXCSR() bfin_read16(USB_EP_NI3_TXCSR) +#define bfin_write_USB_EP_NI3_TXCSR(val) bfin_write16(USB_EP_NI3_TXCSR, val) +#define bfin_read_USB_EP_NI3_RXMAXP() bfin_read16(USB_EP_NI3_RXMAXP) +#define bfin_write_USB_EP_NI3_RXMAXP(val) bfin_write16(USB_EP_NI3_RXMAXP, val) +#define bfin_read_USB_EP_NI3_RXCSR() bfin_read16(USB_EP_NI3_RXCSR) +#define bfin_write_USB_EP_NI3_RXCSR(val) bfin_write16(USB_EP_NI3_RXCSR, val) +#define bfin_read_USB_EP_NI3_RXCOUNT() bfin_read16(USB_EP_NI3_RXCOUNT) +#define bfin_write_USB_EP_NI3_RXCOUNT(val) bfin_write16(USB_EP_NI3_RXCOUNT, val) +#define bfin_read_USB_EP_NI3_TXTYPE() bfin_read16(USB_EP_NI3_TXTYPE) +#define bfin_write_USB_EP_NI3_TXTYPE(val) bfin_write16(USB_EP_NI3_TXTYPE, val) +#define bfin_read_USB_EP_NI3_TXINTERVAL() bfin_read16(USB_EP_NI3_TXINTERVAL) +#define bfin_write_USB_EP_NI3_TXINTERVAL(val) bfin_write16(USB_EP_NI3_TXINTERVAL, val) +#define bfin_read_USB_EP_NI3_RXTYPE() bfin_read16(USB_EP_NI3_RXTYPE) +#define bfin_write_USB_EP_NI3_RXTYPE(val) bfin_write16(USB_EP_NI3_RXTYPE, val) +#define bfin_read_USB_EP_NI3_RXINTERVAL() bfin_read16(USB_EP_NI3_RXINTERVAL) +#define bfin_write_USB_EP_NI3_RXINTERVAL(val) bfin_write16(USB_EP_NI3_RXINTERVAL, val) + +/* USB Endbfin_read_()oint 4 Control Registers */ + +#define bfin_read_USB_EP_NI3_TXCOUNT() bfin_read16(USB_EP_NI3_TXCOUNT) +#define bfin_write_USB_EP_NI3_TXCOUNT(val) bfin_write16(USB_EP_NI3_TXCOUNT, val) +#define bfin_read_USB_EP_NI4_TXMAXP() bfin_read16(USB_EP_NI4_TXMAXP) +#define bfin_write_USB_EP_NI4_TXMAXP(val) bfin_write16(USB_EP_NI4_TXMAXP, val) +#define bfin_read_USB_EP_NI4_TXCSR() bfin_read16(USB_EP_NI4_TXCSR) +#define bfin_write_USB_EP_NI4_TXCSR(val) bfin_write16(USB_EP_NI4_TXCSR, val) +#define bfin_read_USB_EP_NI4_RXMAXP() bfin_read16(USB_EP_NI4_RXMAXP) +#define bfin_write_USB_EP_NI4_RXMAXP(val) bfin_write16(USB_EP_NI4_RXMAXP, val) +#define bfin_read_USB_EP_NI4_RXCSR() bfin_read16(USB_EP_NI4_RXCSR) +#define bfin_write_USB_EP_NI4_RXCSR(val) bfin_write16(USB_EP_NI4_RXCSR, val) +#define bfin_read_USB_EP_NI4_RXCOUNT() bfin_read16(USB_EP_NI4_RXCOUNT) +#define bfin_write_USB_EP_NI4_RXCOUNT(val) bfin_write16(USB_EP_NI4_RXCOUNT, val) +#define bfin_read_USB_EP_NI4_TXTYPE() bfin_read16(USB_EP_NI4_TXTYPE) +#define bfin_write_USB_EP_NI4_TXTYPE(val) bfin_write16(USB_EP_NI4_TXTYPE, val) +#define bfin_read_USB_EP_NI4_TXINTERVAL() bfin_read16(USB_EP_NI4_TXINTERVAL) +#define bfin_write_USB_EP_NI4_TXINTERVAL(val) bfin_write16(USB_EP_NI4_TXINTERVAL, val) +#define bfin_read_USB_EP_NI4_RXTYPE() bfin_read16(USB_EP_NI4_RXTYPE) +#define bfin_write_USB_EP_NI4_RXTYPE(val) bfin_write16(USB_EP_NI4_RXTYPE, val) +#define bfin_read_USB_EP_NI4_RXINTERVAL() bfin_read16(USB_EP_NI4_RXINTERVAL) +#define bfin_write_USB_EP_NI4_RXINTERVAL(val) bfin_write16(USB_EP_NI4_RXINTERVAL, val) + +/* USB Endbfin_read_()oint 5 Control Registers */ + +#define bfin_read_USB_EP_NI4_TXCOUNT() bfin_read16(USB_EP_NI4_TXCOUNT) +#define bfin_write_USB_EP_NI4_TXCOUNT(val) bfin_write16(USB_EP_NI4_TXCOUNT, val) +#define bfin_read_USB_EP_NI5_TXMAXP() bfin_read16(USB_EP_NI5_TXMAXP) +#define bfin_write_USB_EP_NI5_TXMAXP(val) bfin_write16(USB_EP_NI5_TXMAXP, val) +#define bfin_read_USB_EP_NI5_TXCSR() bfin_read16(USB_EP_NI5_TXCSR) +#define bfin_write_USB_EP_NI5_TXCSR(val) bfin_write16(USB_EP_NI5_TXCSR, val) +#define bfin_read_USB_EP_NI5_RXMAXP() bfin_read16(USB_EP_NI5_RXMAXP) +#define bfin_write_USB_EP_NI5_RXMAXP(val) bfin_write16(USB_EP_NI5_RXMAXP, val) +#define bfin_read_USB_EP_NI5_RXCSR() bfin_read16(USB_EP_NI5_RXCSR) +#define bfin_write_USB_EP_NI5_RXCSR(val) bfin_write16(USB_EP_NI5_RXCSR, val) +#define bfin_read_USB_EP_NI5_RXCOUNT() bfin_read16(USB_EP_NI5_RXCOUNT) +#define bfin_write_USB_EP_NI5_RXCOUNT(val) bfin_write16(USB_EP_NI5_RXCOUNT, val) +#define bfin_read_USB_EP_NI5_TXTYPE() bfin_read16(USB_EP_NI5_TXTYPE) +#define bfin_write_USB_EP_NI5_TXTYPE(val) bfin_write16(USB_EP_NI5_TXTYPE, val) +#define bfin_read_USB_EP_NI5_TXINTERVAL() bfin_read16(USB_EP_NI5_TXINTERVAL) +#define bfin_write_USB_EP_NI5_TXINTERVAL(val) bfin_write16(USB_EP_NI5_TXINTERVAL, val) +#define bfin_read_USB_EP_NI5_RXTYPE() bfin_read16(USB_EP_NI5_RXTYPE) +#define bfin_write_USB_EP_NI5_RXTYPE(val) bfin_write16(USB_EP_NI5_RXTYPE, val) +#define bfin_read_USB_EP_NI5_RXINTERVAL() bfin_read16(USB_EP_NI5_RXINTERVAL) +#define bfin_write_USB_EP_NI5_RXINTERVAL(val) bfin_write16(USB_EP_NI5_RXINTERVAL, val) + +/* USB Endbfin_read_()oint 6 Control Registers */ + +#define bfin_read_USB_EP_NI5_TXCOUNT() bfin_read16(USB_EP_NI5_TXCOUNT) +#define bfin_write_USB_EP_NI5_TXCOUNT(val) bfin_write16(USB_EP_NI5_TXCOUNT, val) +#define bfin_read_USB_EP_NI6_TXMAXP() bfin_read16(USB_EP_NI6_TXMAXP) +#define bfin_write_USB_EP_NI6_TXMAXP(val) bfin_write16(USB_EP_NI6_TXMAXP, val) +#define bfin_read_USB_EP_NI6_TXCSR() bfin_read16(USB_EP_NI6_TXCSR) +#define bfin_write_USB_EP_NI6_TXCSR(val) bfin_write16(USB_EP_NI6_TXCSR, val) +#define bfin_read_USB_EP_NI6_RXMAXP() bfin_read16(USB_EP_NI6_RXMAXP) +#define bfin_write_USB_EP_NI6_RXMAXP(val) bfin_write16(USB_EP_NI6_RXMAXP, val) +#define bfin_read_USB_EP_NI6_RXCSR() bfin_read16(USB_EP_NI6_RXCSR) +#define bfin_write_USB_EP_NI6_RXCSR(val) bfin_write16(USB_EP_NI6_RXCSR, val) +#define bfin_read_USB_EP_NI6_RXCOUNT() bfin_read16(USB_EP_NI6_RXCOUNT) +#define bfin_write_USB_EP_NI6_RXCOUNT(val) bfin_write16(USB_EP_NI6_RXCOUNT, val) +#define bfin_read_USB_EP_NI6_TXTYPE() bfin_read16(USB_EP_NI6_TXTYPE) +#define bfin_write_USB_EP_NI6_TXTYPE(val) bfin_write16(USB_EP_NI6_TXTYPE, val) +#define bfin_read_USB_EP_NI6_TXINTERVAL() bfin_read16(USB_EP_NI6_TXINTERVAL) +#define bfin_write_USB_EP_NI6_TXINTERVAL(val) bfin_write16(USB_EP_NI6_TXINTERVAL, val) +#define bfin_read_USB_EP_NI6_RXTYPE() bfin_read16(USB_EP_NI6_RXTYPE) +#define bfin_write_USB_EP_NI6_RXTYPE(val) bfin_write16(USB_EP_NI6_RXTYPE, val) +#define bfin_read_USB_EP_NI6_RXINTERVAL() bfin_read16(USB_EP_NI6_RXINTERVAL) +#define bfin_write_USB_EP_NI6_RXINTERVAL(val) bfin_write16(USB_EP_NI6_RXINTERVAL, val) + +/* USB Endbfin_read_()oint 7 Control Registers */ + +#define bfin_read_USB_EP_NI6_TXCOUNT() bfin_read16(USB_EP_NI6_TXCOUNT) +#define bfin_write_USB_EP_NI6_TXCOUNT(val) bfin_write16(USB_EP_NI6_TXCOUNT, val) +#define bfin_read_USB_EP_NI7_TXMAXP() bfin_read16(USB_EP_NI7_TXMAXP) +#define bfin_write_USB_EP_NI7_TXMAXP(val) bfin_write16(USB_EP_NI7_TXMAXP, val) +#define bfin_read_USB_EP_NI7_TXCSR() bfin_read16(USB_EP_NI7_TXCSR) +#define bfin_write_USB_EP_NI7_TXCSR(val) bfin_write16(USB_EP_NI7_TXCSR, val) +#define bfin_read_USB_EP_NI7_RXMAXP() bfin_read16(USB_EP_NI7_RXMAXP) +#define bfin_write_USB_EP_NI7_RXMAXP(val) bfin_write16(USB_EP_NI7_RXMAXP, val) +#define bfin_read_USB_EP_NI7_RXCSR() bfin_read16(USB_EP_NI7_RXCSR) +#define bfin_write_USB_EP_NI7_RXCSR(val) bfin_write16(USB_EP_NI7_RXCSR, val) +#define bfin_read_USB_EP_NI7_RXCOUNT() bfin_read16(USB_EP_NI7_RXCOUNT) +#define bfin_write_USB_EP_NI7_RXCOUNT(val) bfin_write16(USB_EP_NI7_RXCOUNT, val) +#define bfin_read_USB_EP_NI7_TXTYPE() bfin_read16(USB_EP_NI7_TXTYPE) +#define bfin_write_USB_EP_NI7_TXTYPE(val) bfin_write16(USB_EP_NI7_TXTYPE, val) +#define bfin_read_USB_EP_NI7_TXINTERVAL() bfin_read16(USB_EP_NI7_TXINTERVAL) +#define bfin_write_USB_EP_NI7_TXINTERVAL(val) bfin_write16(USB_EP_NI7_TXINTERVAL, val) +#define bfin_read_USB_EP_NI7_RXTYPE() bfin_read16(USB_EP_NI7_RXTYPE) +#define bfin_write_USB_EP_NI7_RXTYPE(val) bfin_write16(USB_EP_NI7_RXTYPE, val) +#define bfin_read_USB_EP_NI7_RXINTERVAL() bfin_read16(USB_EP_NI7_RXINTERVAL) +#define bfin_write_USB_EP_NI7_RXINTERVAL(val) bfin_write16(USB_EP_NI7_RXINTERVAL, val) +#define bfin_read_USB_EP_NI7_TXCOUNT() bfin_read16(USB_EP_NI7_TXCOUNT) +#define bfin_write_USB_EP_NI7_TXCOUNT(val) bfin_write16(USB_EP_NI7_TXCOUNT, val) +#define bfin_read_USB_DMA_INTERRUPT() bfin_read16(USB_DMA_INTERRUPT) +#define bfin_write_USB_DMA_INTERRUPT(val) bfin_write16(USB_DMA_INTERRUPT, val) + +/* USB Channel 0 Config Registers */ + +#define bfin_read_USB_DMA0CONTROL() bfin_read16(USB_DMA0CONTROL) +#define bfin_write_USB_DMA0CONTROL(val) bfin_write16(USB_DMA0CONTROL, val) +#define bfin_read_USB_DMA0ADDRLOW() bfin_read16(USB_DMA0ADDRLOW) +#define bfin_write_USB_DMA0ADDRLOW(val) bfin_write16(USB_DMA0ADDRLOW, val) +#define bfin_read_USB_DMA0ADDRHIGH() bfin_read16(USB_DMA0ADDRHIGH) +#define bfin_write_USB_DMA0ADDRHIGH(val) bfin_write16(USB_DMA0ADDRHIGH, val) +#define bfin_read_USB_DMA0COUNTLOW() bfin_read16(USB_DMA0COUNTLOW) +#define bfin_write_USB_DMA0COUNTLOW(val) bfin_write16(USB_DMA0COUNTLOW, val) +#define bfin_read_USB_DMA0COUNTHIGH() bfin_read16(USB_DMA0COUNTHIGH) +#define bfin_write_USB_DMA0COUNTHIGH(val) bfin_write16(USB_DMA0COUNTHIGH, val) + +/* USB Channel 1 Config Registers */ + +#define bfin_read_USB_DMA1CONTROL() bfin_read16(USB_DMA1CONTROL) +#define bfin_write_USB_DMA1CONTROL(val) bfin_write16(USB_DMA1CONTROL, val) +#define bfin_read_USB_DMA1ADDRLOW() bfin_read16(USB_DMA1ADDRLOW) +#define bfin_write_USB_DMA1ADDRLOW(val) bfin_write16(USB_DMA1ADDRLOW, val) +#define bfin_read_USB_DMA1ADDRHIGH() bfin_read16(USB_DMA1ADDRHIGH) +#define bfin_write_USB_DMA1ADDRHIGH(val) bfin_write16(USB_DMA1ADDRHIGH, val) +#define bfin_read_USB_DMA1COUNTLOW() bfin_read16(USB_DMA1COUNTLOW) +#define bfin_write_USB_DMA1COUNTLOW(val) bfin_write16(USB_DMA1COUNTLOW, val) +#define bfin_read_USB_DMA1COUNTHIGH() bfin_read16(USB_DMA1COUNTHIGH) +#define bfin_write_USB_DMA1COUNTHIGH(val) bfin_write16(USB_DMA1COUNTHIGH, val) + +/* USB Channel 2 Config Registers */ + +#define bfin_read_USB_DMA2CONTROL() bfin_read16(USB_DMA2CONTROL) +#define bfin_write_USB_DMA2CONTROL(val) bfin_write16(USB_DMA2CONTROL, val) +#define bfin_read_USB_DMA2ADDRLOW() bfin_read16(USB_DMA2ADDRLOW) +#define bfin_write_USB_DMA2ADDRLOW(val) bfin_write16(USB_DMA2ADDRLOW, val) +#define bfin_read_USB_DMA2ADDRHIGH() bfin_read16(USB_DMA2ADDRHIGH) +#define bfin_write_USB_DMA2ADDRHIGH(val) bfin_write16(USB_DMA2ADDRHIGH, val) +#define bfin_read_USB_DMA2COUNTLOW() bfin_read16(USB_DMA2COUNTLOW) +#define bfin_write_USB_DMA2COUNTLOW(val) bfin_write16(USB_DMA2COUNTLOW, val) +#define bfin_read_USB_DMA2COUNTHIGH() bfin_read16(USB_DMA2COUNTHIGH) +#define bfin_write_USB_DMA2COUNTHIGH(val) bfin_write16(USB_DMA2COUNTHIGH, val) + +/* USB Channel 3 Config Registers */ + +#define bfin_read_USB_DMA3CONTROL() bfin_read16(USB_DMA3CONTROL) +#define bfin_write_USB_DMA3CONTROL(val) bfin_write16(USB_DMA3CONTROL, val) +#define bfin_read_USB_DMA3ADDRLOW() bfin_read16(USB_DMA3ADDRLOW) +#define bfin_write_USB_DMA3ADDRLOW(val) bfin_write16(USB_DMA3ADDRLOW, val) +#define bfin_read_USB_DMA3ADDRHIGH() bfin_read16(USB_DMA3ADDRHIGH) +#define bfin_write_USB_DMA3ADDRHIGH(val) bfin_write16(USB_DMA3ADDRHIGH, val) +#define bfin_read_USB_DMA3COUNTLOW() bfin_read16(USB_DMA3COUNTLOW) +#define bfin_write_USB_DMA3COUNTLOW(val) bfin_write16(USB_DMA3COUNTLOW, val) +#define bfin_read_USB_DMA3COUNTHIGH() bfin_read16(USB_DMA3COUNTHIGH) +#define bfin_write_USB_DMA3COUNTHIGH(val) bfin_write16(USB_DMA3COUNTHIGH, val) + +/* USB Channel 4 Config Registers */ + +#define bfin_read_USB_DMA4CONTROL() bfin_read16(USB_DMA4CONTROL) +#define bfin_write_USB_DMA4CONTROL(val) bfin_write16(USB_DMA4CONTROL, val) +#define bfin_read_USB_DMA4ADDRLOW() bfin_read16(USB_DMA4ADDRLOW) +#define bfin_write_USB_DMA4ADDRLOW(val) bfin_write16(USB_DMA4ADDRLOW, val) +#define bfin_read_USB_DMA4ADDRHIGH() bfin_read16(USB_DMA4ADDRHIGH) +#define bfin_write_USB_DMA4ADDRHIGH(val) bfin_write16(USB_DMA4ADDRHIGH, val) +#define bfin_read_USB_DMA4COUNTLOW() bfin_read16(USB_DMA4COUNTLOW) +#define bfin_write_USB_DMA4COUNTLOW(val) bfin_write16(USB_DMA4COUNTLOW, val) +#define bfin_read_USB_DMA4COUNTHIGH() bfin_read16(USB_DMA4COUNTHIGH) +#define bfin_write_USB_DMA4COUNTHIGH(val) bfin_write16(USB_DMA4COUNTHIGH, val) + +/* USB Channel 5 Config Registers */ + +#define bfin_read_USB_DMA5CONTROL() bfin_read16(USB_DMA5CONTROL) +#define bfin_write_USB_DMA5CONTROL(val) bfin_write16(USB_DMA5CONTROL, val) +#define bfin_read_USB_DMA5ADDRLOW() bfin_read16(USB_DMA5ADDRLOW) +#define bfin_write_USB_DMA5ADDRLOW(val) bfin_write16(USB_DMA5ADDRLOW, val) +#define bfin_read_USB_DMA5ADDRHIGH() bfin_read16(USB_DMA5ADDRHIGH) +#define bfin_write_USB_DMA5ADDRHIGH(val) bfin_write16(USB_DMA5ADDRHIGH, val) +#define bfin_read_USB_DMA5COUNTLOW() bfin_read16(USB_DMA5COUNTLOW) +#define bfin_write_USB_DMA5COUNTLOW(val) fin_write16(USB_DMA5COUNTLOW, val) +#define bfin_read_USB_DMA5COUNTHIGH() bfin_read16(USB_DMA5COUNTHIGH) +#define bfin_write_USB_DMA5COUNTHIGH(val) bfin_write16(USB_DMA5COUNTHIGH, val) + +/* USB Channel 6 Config Registers */ + +#define bfin_read_USB_DMA6CONTROL() bfin_read16(USB_DMA6CONTROL) +#define bfin_write_USB_DMA6CONTROL(val) bfin_write16(USB_DMA6CONTROL, val) +#define bfin_read_USB_DMA6ADDRLOW() bfin_read16(USB_DMA6ADDRLOW) +#define bfin_write_USB_DMA6ADDRLOW(val) bfin_write16(USB_DMA6ADDRLOW, val) +#define bfin_read_USB_DMA6ADDRHIGH() bfin_read16(USB_DMA6ADDRHIGH) +#define bfin_write_USB_DMA6ADDRHIGH(val) bfin_write16(USB_DMA6ADDRHIGH, val) +#define bfin_read_USB_DMA6COUNTLOW() bfin_read16(USB_DMA6COUNTLOW) +#define bfin_write_USB_DMA6COUNTLOW(val) bfin_write16(USB_DMA6COUNTLOW, val) +#define bfin_read_USB_DMA6COUNTHIGH() bfin_read16(USB_DMA6COUNTHIGH) +#define bfin_write_USB_DMA6COUNTHIGH(val) bfin_write16(USB_DMA6COUNTHIGH, val) + +/* USB Channel 7 Config Registers */ + +#define bfin_read_USB_DMA7CONTROL() bfin_read16(USB_DMA7CONTROL) +#define bfin_write_USB_DMA7CONTROL(val) bfin_write16(USB_DMA7CONTROL, val) +#define bfin_read_USB_DMA7ADDRLOW() bfin_read16(USB_DMA7ADDRLOW) +#define bfin_write_USB_DMA7ADDRLOW(val) bfin_write16(USB_DMA7ADDRLOW, val) +#define bfin_read_USB_DMA7ADDRHIGH() bfin_read16(USB_DMA7ADDRHIGH) +#define bfin_write_USB_DMA7ADDRHIGH(val) bfin_write16(USB_DMA7ADDRHIGH, val) +#define bfin_read_USB_DMA7COUNTLOW() bfin_read16(USB_DMA7COUNTLOW) +#define bfin_write_USB_DMA7COUNTLOW(val) bfin_write16(USB_DMA7COUNTLOW, val) +#define bfin_read_USB_DMA7COUNTHIGH() bfin_read16(USB_DMA7COUNTHIGH) +#define bfin_write_USB_DMA7COUNTHIGH(val) bfin_write16(USB_DMA7COUNTHIGH, val) + +/* Keybfin_read_()ad Registers */ + +#define bfin_read_KPAD_CTL() bfin_read16(KPAD_CTL) +#define bfin_write_KPAD_CTL(val) bfin_write16(KPAD_CTL, val) +#define bfin_read_KPAD_PRESCALE() bfin_read16(KPAD_PRESCALE) +#define bfin_write_KPAD_PRESCALE(val) bfin_write16(KPAD_PRESCALE, val) +#define bfin_read_KPAD_MSEL() bfin_read16(KPAD_MSEL) +#define bfin_write_KPAD_MSEL(val) bfin_write16(KPAD_MSEL, val) +#define bfin_read_KPAD_ROWCOL() bfin_read16(KPAD_ROWCOL) +#define bfin_write_KPAD_ROWCOL(val) bfin_write16(KPAD_ROWCOL, val) +#define bfin_read_KPAD_STAT() bfin_read16(KPAD_STAT) +#define bfin_write_KPAD_STAT(val) bfin_write16(KPAD_STAT, val) +#define bfin_read_KPAD_SOFTEVAL() bfin_read16(KPAD_SOFTEVAL) +#define bfin_write_KPAD_SOFTEVAL(val) bfin_write16(KPAD_SOFTEVAL, val) + +/* Pixel Combfin_read_()ositor (PIXC) Registers */ + +#define bfin_read_PIXC_CTL() bfin_read16(PIXC_CTL) +#define bfin_write_PIXC_CTL(val) bfin_write16(PIXC_CTL, val) +#define bfin_read_PIXC_PPL() bfin_read16(PIXC_PPL) +#define bfin_write_PIXC_PPL(val) bfin_write16(PIXC_PPL, val) +#define bfin_read_PIXC_LPF() bfin_read16(PIXC_LPF) +#define bfin_write_PIXC_LPF(val) bfin_write16(PIXC_LPF, val) +#define bfin_read_PIXC_AHSTART() bfin_read16(PIXC_AHSTART) +#define bfin_write_PIXC_AHSTART(val) bfin_write16(PIXC_AHSTART, val) +#define bfin_read_PIXC_AHEND() bfin_read16(PIXC_AHEND) +#define bfin_write_PIXC_AHEND(val) bfin_write16(PIXC_AHEND, val) +#define bfin_read_PIXC_AVSTART() bfin_read16(PIXC_AVSTART) +#define bfin_write_PIXC_AVSTART(val) bfin_write16(PIXC_AVSTART, val) +#define bfin_read_PIXC_AVEND() bfin_read16(PIXC_AVEND) +#define bfin_write_PIXC_AVEND(val) bfin_write16(PIXC_AVEND, val) +#define bfin_read_PIXC_ATRANSP() bfin_read16(PIXC_ATRANSP) +#define bfin_write_PIXC_ATRANSP(val) bfin_write16(PIXC_ATRANSP, val) +#define bfin_read_PIXC_BHSTART() bfin_read16(PIXC_BHSTART) +#define bfin_write_PIXC_BHSTART(val) bfin_write16(PIXC_BHSTART, val) +#define bfin_read_PIXC_BHEND() bfin_read16(PIXC_BHEND) +#define bfin_write_PIXC_BHEND(val) bfin_write16(PIXC_BHEND, val) +#define bfin_read_PIXC_BVSTART() bfin_read16(PIXC_BVSTART) +#define bfin_write_PIXC_BVSTART(val) bfin_write16(PIXC_BVSTART, val) +#define bfin_read_PIXC_BVEND() bfin_read16(PIXC_BVEND) +#define bfin_write_PIXC_BVEND(val) bfin_write16(PIXC_BVEND, val) +#define bfin_read_PIXC_BTRANSP() bfin_read16(PIXC_BTRANSP) +#define bfin_write_PIXC_BTRANSP(val) bfin_write16(PIXC_BTRANSP, val) +#define bfin_read_PIXC_INTRSTAT() bfin_read16(PIXC_INTRSTAT) +#define bfin_write_PIXC_INTRSTAT(val) bfin_write16(PIXC_INTRSTAT, val) +#define bfin_read_PIXC_RYCON() bfin_read32(PIXC_RYCON) +#define bfin_write_PIXC_RYCON(val) bfin_write32(PIXC_RYCON, val) +#define bfin_read_PIXC_GUCON() bfin_read32(PIXC_GUCON) +#define bfin_write_PIXC_GUCON(val) bfin_write32(PIXC_GUCON, val) +#define bfin_read_PIXC_BVCON() bfin_read32(PIXC_BVCON) +#define bfin_write_PIXC_BVCON(val) bfin_write32(PIXC_BVCON, val) +#define bfin_read_PIXC_CCBIAS() bfin_read32(PIXC_CCBIAS) +#define bfin_write_PIXC_CCBIAS(val) bfin_write32(PIXC_CCBIAS, val) +#define bfin_read_PIXC_TC() bfin_read32(PIXC_TC) +#define bfin_write_PIXC_TC(val) bfin_write32(PIXC_TC, val) + +/* Handshake MDMA 0 Registers */ + +#define bfin_read_HMDMA0_CONTROL() bfin_read16(HMDMA0_CONTROL) +#define bfin_write_HMDMA0_CONTROL(val) bfin_write16(HMDMA0_CONTROL, val) +#define bfin_read_HMDMA0_ECINIT() bfin_read16(HMDMA0_ECINIT) +#define bfin_write_HMDMA0_ECINIT(val) bfin_write16(HMDMA0_ECINIT, val) +#define bfin_read_HMDMA0_BCINIT() bfin_read16(HMDMA0_BCINIT) +#define bfin_write_HMDMA0_BCINIT(val) bfin_write16(HMDMA0_BCINIT, val) +#define bfin_read_HMDMA0_ECURGENT() bfin_read16(HMDMA0_ECURGENT) +#define bfin_write_HMDMA0_ECURGENT(val) bfin_write16(HMDMA0_ECURGENT, val) +#define bfin_read_HMDMA0_ECOVERFLOW() bfin_read16(HMDMA0_ECOVERFLOW) +#define bfin_write_HMDMA0_ECOVERFLOW(val) bfin_write16(HMDMA0_ECOVERFLOW, val) +#define bfin_read_HMDMA0_ECOUNT() bfin_read16(HMDMA0_ECOUNT) +#define bfin_write_HMDMA0_ECOUNT(val) bfin_write16(HMDMA0_ECOUNT, val) +#define bfin_read_HMDMA0_BCOUNT() bfin_read16(HMDMA0_BCOUNT) +#define bfin_write_HMDMA0_BCOUNT(val) bfin_write16(HMDMA0_BCOUNT, val) + +/* Handshake MDMA 1 Registers */ + +#define bfin_read_HMDMA1_CONTROL() bfin_read16(HMDMA1_CONTROL) +#define bfin_write_HMDMA1_CONTROL(val) bfin_write16(HMDMA1_CONTROL, val) +#define bfin_read_HMDMA1_ECINIT() bfin_read16(HMDMA1_ECINIT) +#define bfin_write_HMDMA1_ECINIT(val) bfin_write16(HMDMA1_ECINIT, val) +#define bfin_read_HMDMA1_BCINIT() bfin_read16(HMDMA1_BCINIT) +#define bfin_write_HMDMA1_BCINIT(val) bfin_write16(HMDMA1_BCINIT, val) +#define bfin_read_HMDMA1_ECURGENT() bfin_read16(HMDMA1_ECURGENT) +#define bfin_write_HMDMA1_ECURGENT(val) bfin_write16(HMDMA1_ECURGENT, val) +#define bfin_read_HMDMA1_ECOVERFLOW() bfin_read16(HMDMA1_ECOVERFLOW) +#define bfin_write_HMDMA1_ECOVERFLOW(val) bfin_write16(HMDMA1_ECOVERFLOW, val) +#define bfin_read_HMDMA1_ECOUNT() bfin_read16(HMDMA1_ECOUNT) +#define bfin_write_HMDMA1_ECOUNT(val) bfin_write16(HMDMA1_ECOUNT, val) +#define bfin_read_HMDMA1_BCOUNT() bfin_read16(HMDMA1_BCOUNT) +#define bfin_write_HMDMA1_BCOUNT(val) bfin_write16(HMDMA1_BCOUNT, val) + +#endif /* _CDEF_BF549_H */ diff --git a/include/asm-blackfin/mach-bf548/cdefBF54x_base.h b/include/asm-blackfin/mach-bf548/cdefBF54x_base.h new file mode 100644 index 00000000000000..6bbcefeb3627c1 --- /dev/null +++ b/include/asm-blackfin/mach-bf548/cdefBF54x_base.h @@ -0,0 +1,2722 @@ +/* + * File: include/asm-blackfin/mach-bf548/cdefBF54x_base.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _CDEF_BF54X_H +#define _CDEF_BF54X_H + +#include <defBF54x_base.h> + +/* ************************************************************** */ +/* SYSTEM & MMR ADDRESS DEFINITIONS COMMON TO ALL ADSP-BF54x */ +/* ************************************************************** */ + +/* PLL Registers */ + +#define bfin_read_PLL_CTL() bfin_read16(PLL_CTL) +#define bfin_write_PLL_CTL(val) bfin_write16(PLL_CTL, val) +#define bfin_read_PLL_DIV() bfin_read16(PLL_DIV) +#define bfin_write_PLL_DIV(val) bfin_write16(PLL_DIV, val) +#define bfin_read_VR_CTL() bfin_read16(VR_CTL) +#define bfin_write_VR_CTL(val) bfin_write16(VR_CTL, val) +#define bfin_read_PLL_STAT() bfin_read16(PLL_STAT) +#define bfin_write_PLL_STAT(val) bfin_write16(PLL_STAT, val) +#define bfin_read_PLL_LOCKCNT() bfin_read16(PLL_LOCKCNT) +#define bfin_write_PLL_LOCKCNT(val) bfin_write16(PLL_LOCKCNT, val) + +/* Debug/MP/Emulation Registers (0xFFC00014 - 0xFFC00014) */ + +#define bfin_read_CHIPID() bfin_read32(CHIPID) +#define bfin_write_CHIPID(val) bfin_write32(CHIPID, val) + +/* System Reset and Interrubfin_read_()t Controller (0xFFC00100 - 0xFFC00104) */ + +#define bfin_read_SWRST() bfin_read16(SWRST) +#define bfin_write_SWRST(val) bfin_write16(SWRST, val) +#define bfin_read_SYSCR() bfin_read16(SYSCR) +#define bfin_write_SYSCR(val) bfin_write16(SYSCR, val) + +/* SIC Registers */ + +#define bfin_read_SIC_IMASK0() bfin_read32(SIC_IMASK0) +#define bfin_write_SIC_IMASK0(val) bfin_write32(SIC_IMASK0, val) +#define bfin_read_SIC_IMASK1() bfin_read32(SIC_IMASK1) +#define bfin_write_SIC_IMASK1(val) bfin_write32(SIC_IMASK1, val) +#define bfin_read_SIC_IMASK2() bfin_read32(SIC_IMASK2) +#define bfin_write_SIC_IMASK2(val) bfin_write32(SIC_IMASK2, val) +#define bfin_read_SIC_ISR0() bfin_read32(SIC_ISR0) +#define bfin_write_SIC_ISR0(val) bfin_write32(SIC_ISR0, val) +#define bfin_read_SIC_ISR1() bfin_read32(SIC_ISR1) +#define bfin_write_SIC_ISR1(val) bfin_write32(SIC_ISR1, val) +#define bfin_read_SIC_ISR2() bfin_read32(SIC_ISR2) +#define bfin_write_SIC_ISR2(val) bfin_write32(SIC_ISR2, val) +#define bfin_read_SIC_IWR0() bfin_read32(SIC_IWR0) +#define bfin_write_SIC_IWR0(val) bfin_write32(SIC_IWR0, val) +#define bfin_read_SIC_IWR1() bfin_read32(SIC_IWR1) +#define bfin_write_SIC_IWR1(val) bfin_write32(SIC_IWR1, val) +#define bfin_read_SIC_IWR2() bfin_read32(SIC_IWR2) +#define bfin_write_SIC_IWR2(val) bfin_write32(SIC_IWR2, val) +#define bfin_read_SIC_IAR0() bfin_read32(SIC_IAR0) +#define bfin_write_SIC_IAR0(val) bfin_write32(SIC_IAR0, val) +#define bfin_read_SIC_IAR1() bfin_read32(SIC_IAR1) +#define bfin_write_SIC_IAR1(val) bfin_write32(SIC_IAR1, val) +#define bfin_read_SIC_IAR2() bfin_read32(SIC_IAR2) +#define bfin_write_SIC_IAR2(val) bfin_write32(SIC_IAR2, val) +#define bfin_read_SIC_IAR3() bfin_read32(SIC_IAR3) +#define bfin_write_SIC_IAR3(val) bfin_write32(SIC_IAR3, val) +#define bfin_read_SIC_IAR4() bfin_read32(SIC_IAR4) +#define bfin_write_SIC_IAR4(val) bfin_write32(SIC_IAR4, val) +#define bfin_read_SIC_IAR5() bfin_read32(SIC_IAR5) +#define bfin_write_SIC_IAR5(val) bfin_write32(SIC_IAR5, val) +#define bfin_read_SIC_IAR6() bfin_read32(SIC_IAR6) +#define bfin_write_SIC_IAR6(val) bfin_write32(SIC_IAR6, val) +#define bfin_read_SIC_IAR7() bfin_read32(SIC_IAR7) +#define bfin_write_SIC_IAR7(val) bfin_write32(SIC_IAR7, val) +#define bfin_read_SIC_IAR8() bfin_read32(SIC_IAR8) +#define bfin_write_SIC_IAR8(val) bfin_write32(SIC_IAR8, val) +#define bfin_read_SIC_IAR9() bfin_read32(SIC_IAR9) +#define bfin_write_SIC_IAR9(val) bfin_write32(SIC_IAR9, val) +#define bfin_read_SIC_IAR10() bfin_read32(SIC_IAR10) +#define bfin_write_SIC_IAR10(val) bfin_write32(SIC_IAR10, val) +#define bfin_read_SIC_IAR11() bfin_read32(SIC_IAR11) +#define bfin_write_SIC_IAR11(val) bfin_write32(SIC_IAR11, val) + +/* Watchdog Timer Registers */ + +#define bfin_read_WDOG_CTL() bfin_read16(WDOG_CTL) +#define bfin_write_WDOG_CTL(val) bfin_write16(WDOG_CTL, val) +#define bfin_read_WDOG_CNT() bfin_read32(WDOG_CNT) +#define bfin_write_WDOG_CNT(val) bfin_write32(WDOG_CNT, val) +#define bfin_read_WDOG_STAT() bfin_read32(WDOG_STAT) +#define bfin_write_WDOG_STAT(val) bfin_write32(WDOG_STAT, val) + +/* RTC Registers */ + +#define bfin_read_RTC_STAT() bfin_read32(RTC_STAT) +#define bfin_write_RTC_STAT(val) bfin_write32(RTC_STAT, val) +#define bfin_read_RTC_ICTL() bfin_read16(RTC_ICTL) +#define bfin_write_RTC_ICTL(val) bfin_write16(RTC_ICTL, val) +#define bfin_read_RTC_ISTAT() bfin_read16(RTC_ISTAT) +#define bfin_write_RTC_ISTAT(val) bfin_write16(RTC_ISTAT, val) +#define bfin_read_RTC_SWCNT() bfin_read16(RTC_SWCNT) +#define bfin_write_RTC_SWCNT(val) bfin_write16(RTC_SWCNT, val) +#define bfin_read_RTC_ALARM() bfin_read32(RTC_ALARM) +#define bfin_write_RTC_ALARM(val) bfin_write32(RTC_ALARM, val) +#define bfin_read_RTC_PREN() bfin_read16(RTC_PREN) +#define bfin_write_RTC_PREN(val) bfin_write16(RTC_PREN, val) + +/* UART0 Registers */ + +#define bfin_read_UART0_DLL() bfin_read16(UART0_DLL) +#define bfin_write_UART0_DLL(val) bfin_write16(UART0_DLL, val) +#define bfin_read_UART0_DLH() bfin_read16(UART0_DLH) +#define bfin_write_UART0_DLH(val) bfin_write16(UART0_DLH, val) +#define bfin_read_UART0_GCTL() bfin_read16(UART0_GCTL) +#define bfin_write_UART0_GCTL(val) bfin_write16(UART0_GCTL, val) +#define bfin_read_UART0_LCR() bfin_read16(UART0_LCR) +#define bfin_write_UART0_LCR(val) bfin_write16(UART0_LCR, val) +#define bfin_read_UART0_MCR() bfin_read16(UART0_MCR) +#define bfin_write_UART0_MCR(val) bfin_write16(UART0_MCR, val) +#define bfin_read_UART0_LSR() bfin_read16(UART0_LSR) +#define bfin_write_UART0_LSR(val) bfin_write16(UART0_LSR, val) +#define bfin_read_UART0_MSR() bfin_read16(UART0_MSR) +#define bfin_write_UART0_MSR(val) bfin_write16(UART0_MSR, val) +#define bfin_read_UART0_SCR() bfin_read16(UART0_SCR) +#define bfin_write_UART0_SCR(val) bfin_write16(UART0_SCR, val) +#define bfin_read_UART0_IER_SET() bfin_read16(UART0_IER_SET) +#define bfin_write_UART0_IER_SET(val) bfin_write16(UART0_IER_SET, val) +#define bfin_read_UART0_IER_CLEAR() bfin_read16(UART0_IER_CLEAR) +#define bfin_write_UART0_IER_CLEAR(val) bfin_write16(UART0_IER_CLEAR, val) +#define bfin_read_UART0_THR() bfin_read16(UART0_THR) +#define bfin_write_UART0_THR(val) bfin_write16(UART0_THR, val) +#define bfin_read_UART0_RBR() bfin_read16(UART0_RBR) +#define bfin_write_UART0_RBR(val) bfin_write16(UART0_RBR, val) + +/* SPI0 Registers */ + +#define bfin_read_SPI0_CTL() bfin_read16(SPI0_CTL) +#define bfin_write_SPI0_CTL(val) bfin_write16(SPI0_CTL, val) +#define bfin_read_SPI0_FLG() bfin_read16(SPI0_FLG) +#define bfin_write_SPI0_FLG(val) bfin_write16(SPI0_FLG, val) +#define bfin_read_SPI0_STAT() bfin_read16(SPI0_STAT) +#define bfin_write_SPI0_STAT(val) bfin_write16(SPI0_STAT, val) +#define bfin_read_SPI0_TDBR() bfin_read16(SPI0_TDBR) +#define bfin_write_SPI0_TDBR(val) bfin_write16(SPI0_TDBR, val) +#define bfin_read_SPI0_RDBR() bfin_read16(SPI0_RDBR) +#define bfin_write_SPI0_RDBR(val) bfin_write16(SPI0_RDBR, val) +#define bfin_read_SPI0_BAUD() bfin_read16(SPI0_BAUD) +#define bfin_write_SPI0_BAUD(val) bfin_write16(SPI0_BAUD, val) +#define bfin_read_SPI0_SHADOW() bfin_read16(SPI0_SHADOW) +#define bfin_write_SPI0_SHADOW(val) bfin_write16(SPI0_SHADOW, val) + +/* Timer Groubfin_read_() of 3 registers are not defined in the shared file because they are not available on the ADSP-BF542 processor */ + +/* Two Wire Interface Registers (TWI0) */ + +#define bfin_read_TWI0_CLKDIV() bfin_read16(TWI0_CLKDIV) +#define bfin_write_TWI0_CLKDIV(val) bfin_write16(TWI0_CLKDIV, val) +#define bfin_read_TWI0_CONTROL() bfin_read16(TWI0_CONTROL) +#define bfin_write_TWI0_CONTROL(val) bfin_write16(TWI0_CONTROL, val) +#define bfin_read_TWI0_SLAVE_CTRL() bfin_read16(TWI0_SLAVE_CTRL) +#define bfin_write_TWI0_SLAVE_CTRL(val) bfin_write16(TWI0_SLAVE_CTRL, val) +#define bfin_read_TWI0_SLAVE_STAT() bfin_read16(TWI0_SLAVE_STAT) +#define bfin_write_TWI0_SLAVE_STAT(val) bfin_write16(TWI0_SLAVE_STAT, val) +#define bfin_read_TWI0_SLAVE_ADDR() bfin_read16(TWI0_SLAVE_ADDR) +#define bfin_write_TWI0_SLAVE_ADDR(val) bfin_write16(TWI0_SLAVE_ADDR, val) +#define bfin_read_TWI0_MASTER_CTRL() bfin_read16(TWI0_MASTER_CTRL) +#define bfin_write_TWI0_MASTER_CTRL(val) bfin_write16(TWI0_MASTER_CTRL, val) +#define bfin_read_TWI0_MASTER_STAT() bfin_read16(TWI0_MASTER_STAT) +#define bfin_write_TWI0_MASTER_STAT(val) bfin_write16(TWI0_MASTER_STAT, val) +#define bfin_read_TWI0_MASTER_ADDR() bfin_read16(TWI0_MASTER_ADDR) +#define bfin_write_TWI0_MASTER_ADDR(val) bfin_write16(TWI0_MASTER_ADDR, val) +#define bfin_read_TWI0_INT_STAT() bfin_read16(TWI0_INT_STAT) +#define bfin_write_TWI0_INT_STAT(val) bfin_write16(TWI0_INT_STAT, val) +#define bfin_read_TWI0_INT_MASK() bfin_read16(TWI0_INT_MASK) +#define bfin_write_TWI0_INT_MASK(val) bfin_write16(TWI0_INT_MASK, val) +#define bfin_read_TWI0_FIFO_CTRL() bfin_read16(TWI0_FIFO_CTRL) +#define bfin_write_TWI0_FIFO_CTRL(val) bfin_write16(TWI0_FIFO_CTRL, val) +#define bfin_read_TWI0_FIFO_STAT() bfin_read16(TWI0_FIFO_STAT) +#define bfin_write_TWI0_FIFO_STAT(val) bfin_write16(TWI0_FIFO_STAT, val) +#define bfin_read_TWI0_XMT_DATA8() bfin_read16(TWI0_XMT_DATA8) +#define bfin_write_TWI0_XMT_DATA8(val) bfin_write16(TWI0_XMT_DATA8, val) +#define bfin_read_TWI0_XMT_DATA16() bfin_read16(TWI0_XMT_DATA16) +#define bfin_write_TWI0_XMT_DATA16(val) bfin_write16(TWI0_XMT_DATA16, val) +#define bfin_read_TWI0_RCV_DATA8() bfin_read16(TWI0_RCV_DATA8) +#define bfin_write_TWI0_RCV_DATA8(val) bfin_write16(TWI0_RCV_DATA8, val) +#define bfin_read_TWI0_RCV_DATA16() bfin_read16(TWI0_RCV_DATA16) +#define bfin_write_TWI0_RCV_DATA16(val) bfin_write16(TWI0_RCV_DATA16, val) + +/* SPORT0 is not defined in the shared file because it is not available on the ADSP-BF542 and ADSP-BF544 bfin_read_()rocessors */ + +/* SPORT1 Registers */ + +#define bfin_read_SPORT1_TCR1() bfin_read16(SPORT1_TCR1) +#define bfin_write_SPORT1_TCR1(val) bfin_write16(SPORT1_TCR1, val) +#define bfin_read_SPORT1_TCR2() bfin_read16(SPORT1_TCR2) +#define bfin_write_SPORT1_TCR2(val) bfin_write16(SPORT1_TCR2, val) +#define bfin_read_SPORT1_TCLKDIV() bfin_read16(SPORT1_TCLKDIV) +#define bfin_write_SPORT1_TCLKDIV(val) bfin_write16(SPORT1_TCLKDIV, val) +#define bfin_read_SPORT1_TFSDIV() bfin_read16(SPORT1_TFSDIV) +#define bfin_write_SPORT1_TFSDIV(val) bfin_write16(SPORT1_TFSDIV, val) +#define bfin_read_SPORT1_TX() bfin_read32(SPORT1_TX) +#define bfin_write_SPORT1_TX(val) bfin_write32(SPORT1_TX, val) +#define bfin_read_SPORT1_RX() bfin_read32(SPORT1_RX) +#define bfin_write_SPORT1_RX(val) bfin_write32(SPORT1_RX, val) +#define bfin_read_SPORT1_RCR1() bfin_read16(SPORT1_RCR1) +#define bfin_write_SPORT1_RCR1(val) bfin_write16(SPORT1_RCR1, val) +#define bfin_read_SPORT1_RCR2() bfin_read16(SPORT1_RCR2) +#define bfin_write_SPORT1_RCR2(val) bfin_write16(SPORT1_RCR2, val) +#define bfin_read_SPORT1_RCLKDIV() bfin_read16(SPORT1_RCLKDIV) +#define bfin_write_SPORT1_RCLKDIV(val) bfin_write16(SPORT1_RCLKDIV, val) +#define bfin_read_SPORT1_RFSDIV() bfin_read16(SPORT1_RFSDIV) +#define bfin_write_SPORT1_RFSDIV(val) bfin_write16(SPORT1_RFSDIV, val) +#define bfin_read_SPORT1_STAT() bfin_read16(SPORT1_STAT) +#define bfin_write_SPORT1_STAT(val) bfin_write16(SPORT1_STAT, val) +#define bfin_read_SPORT1_CHNL() bfin_read16(SPORT1_CHNL) +#define bfin_write_SPORT1_CHNL(val) bfin_write16(SPORT1_CHNL, val) +#define bfin_read_SPORT1_MCMC1() bfin_read16(SPORT1_MCMC1) +#define bfin_write_SPORT1_MCMC1(val) bfin_write16(SPORT1_MCMC1, val) +#define bfin_read_SPORT1_MCMC2() bfin_read16(SPORT1_MCMC2) +#define bfin_write_SPORT1_MCMC2(val) bfin_write16(SPORT1_MCMC2, val) +#define bfin_read_SPORT1_MTCS0() bfin_read32(SPORT1_MTCS0) +#define bfin_write_SPORT1_MTCS0(val) bfin_write32(SPORT1_MTCS0, val) +#define bfin_read_SPORT1_MTCS1() bfin_read32(SPORT1_MTCS1) +#define bfin_write_SPORT1_MTCS1(val) bfin_write32(SPORT1_MTCS1, val) +#define bfin_read_SPORT1_MTCS2() bfin_read32(SPORT1_MTCS2) +#define bfin_write_SPORT1_MTCS2(val) bfin_write32(SPORT1_MTCS2, val) +#define bfin_read_SPORT1_MTCS3() bfin_read32(SPORT1_MTCS3) +#define bfin_write_SPORT1_MTCS3(val) bfin_write32(SPORT1_MTCS3, val) +#define bfin_read_SPORT1_MRCS0() bfin_read32(SPORT1_MRCS0) +#define bfin_write_SPORT1_MRCS0(val) bfin_write32(SPORT1_MRCS0, val) +#define bfin_read_SPORT1_MRCS1() bfin_read32(SPORT1_MRCS1) +#define bfin_write_SPORT1_MRCS1(val) bfin_write32(SPORT1_MRCS1, val) +#define bfin_read_SPORT1_MRCS2() bfin_read32(SPORT1_MRCS2) +#define bfin_write_SPORT1_MRCS2(val) bfin_write32(SPORT1_MRCS2, val) +#define bfin_read_SPORT1_MRCS3() bfin_read32(SPORT1_MRCS3) +#define bfin_write_SPORT1_MRCS3(val) bfin_write32(SPORT1_MRCS3, val) + +/* Asynchronous Memory Control Registers */ + +#define bfin_read_EBIU_AMGCTL() bfin_read16(EBIU_AMGCTL) +#define bfin_write_EBIU_AMGCTL(val) bfin_write16(EBIU_AMGCTL, val) +#define bfin_read_EBIU_AMBCTL0() bfin_read32(EBIU_AMBCTL0) +#define bfin_write_EBIU_AMBCTL0(val) bfin_write32(EBIU_AMBCTL0, val) +#define bfin_read_EBIU_AMBCTL1() bfin_read32(EBIU_AMBCTL1) +#define bfin_write_EBIU_AMBCTL1(val) bfin_write32(EBIU_AMBCTL1, val) +#define bfin_read_EBIU_MBSCTL() bfin_read16(EBIU_MBSCTL) +#define bfin_write_EBIU_MBSCTL(val) bfin_write16(EBIU_MBSCTL, val) +#define bfin_read_EBIU_ARBSTAT() bfin_read32(EBIU_ARBSTAT) +#define bfin_write_EBIU_ARBSTAT(val) bfin_write32(EBIU_ARBSTAT, val) +#define bfin_read_EBIU_MODE() bfin_read32(EBIU_MODE) +#define bfin_write_EBIU_MODE(val) bfin_write32(EBIU_MODE, val) +#define bfin_read_EBIU_FCTL() bfin_read16(EBIU_FCTL) +#define bfin_write_EBIU_FCTL(val) bfin_write16(EBIU_FCTL, val) + +/* DDR Memory Control Registers */ + +#define bfin_read_EBIU_DDRCTL0() bfin_read32(EBIU_DDRCTL0) +#define bfin_write_EBIU_DDRCTL0(val) bfin_write32(EBIU_DDRCTL0, val) +#define bfin_read_EBIU_DDRCTL1() bfin_read32(EBIU_DDRCTL1) +#define bfin_write_EBIU_DDRCTL1(val) bfin_write32(EBIU_DDRCTL1, val) +#define bfin_read_EBIU_DDRCTL2() bfin_read32(EBIU_DDRCTL2) +#define bfin_write_EBIU_DDRCTL2(val) bfin_write32(EBIU_DDRCTL2, val) +#define bfin_read_EBIU_DDRCTL3() bfin_read32(EBIU_DDRCTL3) +#define bfin_write_EBIU_DDRCTL3(val) bfin_write32(EBIU_DDRCTL3, val) +#define bfin_read_EBIU_DDRQUE() bfin_read32(EBIU_DDRQUE) +#define bfin_write_EBIU_DDRQUE(val) bfin_write32(EBIU_DDRQUE, val) +#define bfin_read_EBIU_ERRADD() bfin_read32(EBIU_ERRADD) +#define bfin_write_EBIU_ERRADD(val) bfin_write32(EBIU_ERRADD) +#define bfin_read_EBIU_ERRMST() bfin_read16(EBIU_ERRMST) +#define bfin_write_EBIU_ERRMST(val) bfin_write16(EBIU_ERRMST, val) +#define bfin_read_EBIU_RSTCTL() bfin_read16(EBIU_RSTCTL) +#define bfin_write_EBIU_RSTCTL(val) bfin_write16(EBIU_RSTCTL, val) + +/* DDR BankRead and Write Count Registers */ + +#define bfin_read_EBIU_DDRBRC0() bfin_read32(EBIU_DDRBRC0) +#define bfin_write_EBIU_DDRBRC0(val) bfin_write32(EBIU_DDRBRC0, val) +#define bfin_read_EBIU_DDRBRC1() bfin_read32(EBIU_DDRBRC1) +#define bfin_write_EBIU_DDRBRC1(val) bfin_write32(EBIU_DDRBRC1, val) +#define bfin_read_EBIU_DDRBRC2() bfin_read32(EBIU_DDRBRC2) +#define bfin_write_EBIU_DDRBRC2(val) bfin_write32(EBIU_DDRBRC2, val) +#define bfin_read_EBIU_DDRBRC3() bfin_read32(EBIU_DDRBRC3) +#define bfin_write_EBIU_DDRBRC3(val) bfin_write32(EBIU_DDRBRC3, val) +#define bfin_read_EBIU_DDRBRC4() bfin_read32(EBIU_DDRBRC4) +#define bfin_write_EBIU_DDRBRC4(val) bfin_write32(EBIU_DDRBRC4, val) +#define bfin_read_EBIU_DDRBRC5() bfin_read32(EBIU_DDRBRC5) +#define bfin_write_EBIU_DDRBRC5(val) bfin_write32(EBIU_DDRBRC5, val) +#define bfin_read_EBIU_DDRBRC6() bfin_read32(EBIU_DDRBRC6) +#define bfin_write_EBIU_DDRBRC6(val) bfin_write32(EBIU_DDRBRC6, val) +#define bfin_read_EBIU_DDRBRC7() bfin_read32(EBIU_DDRBRC7) +#define bfin_write_EBIU_DDRBRC7(val) bfin_write32(EBIU_DDRBRC7, val) +#define bfin_read_EBIU_DDRBWC0() bfin_read32(EBIU_DDRBWC0) +#define bfin_write_EBIU_DDRBWC0(val) bfin_write32(EBIU_DDRBWC0, val) +#define bfin_read_EBIU_DDRBWC1() bfin_read32(EBIU_DDRBWC1) +#define bfin_write_EBIU_DDRBWC1(val) bfin_write32(EBIU_DDRBWC1, val) +#define bfin_read_EBIU_DDRBWC2() bfin_read32(EBIU_DDRBWC2) +#define bfin_write_EBIU_DDRBWC2(val) bfin_write32(EBIU_DDRBWC2, val) +#define bfin_read_EBIU_DDRBWC3() bfin_read32(EBIU_DDRBWC3) +#define bfin_write_EBIU_DDRBWC3(val) bfin_write32(EBIU_DDRBWC3, val) +#define bfin_read_EBIU_DDRBWC4() bfin_read32(EBIU_DDRBWC4) +#define bfin_write_EBIU_DDRBWC4(val) bfin_write32(EBIU_DDRBWC4, val) +#define bfin_read_EBIU_DDRBWC5() bfin_read32(EBIU_DDRBWC5) +#define bfin_write_EBIU_DDRBWC5(val) bfin_write32(EBIU_DDRBWC5, val) +#define bfin_read_EBIU_DDRBWC6() bfin_read32(EBIU_DDRBWC6) +#define bfin_write_EBIU_DDRBWC6(val) bfin_write32(EBIU_DDRBWC6, val) +#define bfin_read_EBIU_DDRBWC7() bfin_read32(EBIU_DDRBWC7) +#define bfin_write_EBIU_DDRBWC7(val) bfin_write32(EBIU_DDRBWC7, val) +#define bfin_read_EBIU_DDRACCT() bfin_read32(EBIU_DDRACCT) +#define bfin_write_EBIU_DDRACCT(val) bfin_write32(EBIU_DDRACCT, val) +#define bfin_read_EBIU_DDRTACT() bfin_read32(EBIU_DDRTACT) +#define bfin_write_EBIU_DDRTACT(val) bfin_write32(EBIU_DDRTACT, val) +#define bfin_read_EBIU_DDRARCT() bfin_read32(EBIU_DDRARCT) +#define bfin_write_EBIU_DDRARCT(val) bfin_write32(EBIU_DDRARCT, val) +#define bfin_read_EBIU_DDRGC0() bfin_read32(EBIU_DDRGC0) +#define bfin_write_EBIU_DDRGC0(val) bfin_write32(EBIU_DDRGC0, val) +#define bfin_read_EBIU_DDRGC1() bfin_read32(EBIU_DDRGC1) +#define bfin_write_EBIU_DDRGC1(val) bfin_write32(EBIU_DDRGC1, val) +#define bfin_read_EBIU_DDRGC2() bfin_read32(EBIU_DDRGC2) +#define bfin_write_EBIU_DDRGC2(val) bfin_write32(EBIU_DDRGC2, val) +#define bfin_read_EBIU_DDRGC3() bfin_read32(EBIU_DDRGC3) +#define bfin_write_EBIU_DDRGC3(val) bfin_write32(EBIU_DDRGC3, val) +#define bfin_read_EBIU_DDRMCEN() bfin_read32(EBIU_DDRMCEN) +#define bfin_write_EBIU_DDRMCEN(val) bfin_write32(EBIU_DDRMCEN, val) +#define bfin_read_EBIU_DDRMCCL() bfin_read32(EBIU_DDRMCCL) +#define bfin_write_EBIU_DDRMCCL(val) bfin_write32(EBIU_DDRMCCL, val) + +/* DMAC0 Registers */ + +#define bfin_read_DMAC0_TCPER() bfin_read16(DMAC0_TCPER) +#define bfin_write_DMAC0_TCPER(val) bfin_write16(DMAC0_TCPER, val) +#define bfin_read_DMAC0_TCCNT() bfin_read16(DMAC0_TCCNT) +#define bfin_write_DMAC0_TCCNT(val) bfin_write16(DMAC0_TCCNT, val) + +/* DMA Channel 0 Registers */ + +#define bfin_read_DMA0_NEXT_DESC_PTR() bfin_read32(DMA0_NEXT_DESC_PTR) +#define bfin_write_DMA0_NEXT_DESC_PTR(val) bfin_write32(DMA0_NEXT_DESC_PTR) +#define bfin_read_DMA0_START_ADDR() bfin_read32(DMA0_START_ADDR) +#define bfin_write_DMA0_START_ADDR(val) bfin_write32(DMA0_START_ADDR) +#define bfin_read_DMA0_CONFIG() bfin_read16(DMA0_CONFIG) +#define bfin_write_DMA0_CONFIG(val) bfin_write16(DMA0_CONFIG, val) +#define bfin_read_DMA0_X_COUNT() bfin_read16(DMA0_X_COUNT) +#define bfin_write_DMA0_X_COUNT(val) bfin_write16(DMA0_X_COUNT, val) +#define bfin_read_DMA0_X_MODIFY() bfin_read16(DMA0_X_MODIFY) +#define bfin_write_DMA0_X_MODIFY(val) bfin_write16(DMA0_X_MODIFY) +#define bfin_read_DMA0_Y_COUNT() bfin_read16(DMA0_Y_COUNT) +#define bfin_write_DMA0_Y_COUNT(val) bfin_write16(DMA0_Y_COUNT, val) +#define bfin_read_DMA0_Y_MODIFY() bfin_read16(DMA0_Y_MODIFY) +#define bfin_write_DMA0_Y_MODIFY(val) bfin_write16(DMA0_Y_MODIFY) +#define bfin_read_DMA0_CURR_DESC_PTR() bfin_read32(DMA0_CURR_DESC_PTR) +#define bfin_write_DMA0_CURR_DESC_PTR(val) bfin_write32(DMA0_CURR_DESC_PTR) +#define bfin_read_DMA0_CURR_ADDR() bfin_read32(DMA0_CURR_ADDR) +#define bfin_write_DMA0_CURR_ADDR(val) bfin_write32(DMA0_CURR_ADDR) +#define bfin_read_DMA0_IRQ_STATUS() bfin_read16(DMA0_IRQ_STATUS) +#define bfin_write_DMA0_IRQ_STATUS(val) bfin_write16(DMA0_IRQ_STATUS, val) +#define bfin_read_DMA0_PERIPHERAL_MAP() bfin_read16(DMA0_PERIPHERAL_MAP) +#define bfin_write_DMA0_PERIPHERAL_MAP(val) bfin_write16(DMA0_PERIPHERAL_MAP, val) +#define bfin_read_DMA0_CURR_X_COUNT() bfin_read16(DMA0_CURR_X_COUNT) +#define bfin_write_DMA0_CURR_X_COUNT(val) bfin_write16(DMA0_CURR_X_COUNT, val) +#define bfin_read_DMA0_CURR_Y_COUNT() bfin_read16(DMA0_CURR_Y_COUNT) +#define bfin_write_DMA0_CURR_Y_COUNT(val) bfin_write16(DMA0_CURR_Y_COUNT, val) + +/* DMA Channel 1 Registers */ + +#define bfin_read_DMA1_NEXT_DESC_PTR() bfin_read32(DMA1_NEXT_DESC_PTR) +#define bfin_write_DMA1_NEXT_DESC_PTR(val) bfin_write32(DMA1_NEXT_DESC_PTR) +#define bfin_read_DMA1_START_ADDR() bfin_read32(DMA1_START_ADDR) +#define bfin_write_DMA1_START_ADDR(val) bfin_write32(DMA1_START_ADDR) +#define bfin_read_DMA1_CONFIG() bfin_read16(DMA1_CONFIG) +#define bfin_write_DMA1_CONFIG(val) bfin_write16(DMA1_CONFIG, val) +#define bfin_read_DMA1_X_COUNT() bfin_read16(DMA1_X_COUNT) +#define bfin_write_DMA1_X_COUNT(val) bfin_write16(DMA1_X_COUNT, val) +#define bfin_read_DMA1_X_MODIFY() bfin_read16(DMA1_X_MODIFY) +#define bfin_write_DMA1_X_MODIFY(val) bfin_write16(DMA1_X_MODIFY) +#define bfin_read_DMA1_Y_COUNT() bfin_read16(DMA1_Y_COUNT) +#define bfin_write_DMA1_Y_COUNT(val) bfin_write16(DMA1_Y_COUNT, val) +#define bfin_read_DMA1_Y_MODIFY() bfin_read16(DMA1_Y_MODIFY) +#define bfin_write_DMA1_Y_MODIFY(val) bfin_write16(DMA1_Y_MODIFY) +#define bfin_read_DMA1_CURR_DESC_PTR() bfin_read32(DMA1_CURR_DESC_PTR) +#define bfin_write_DMA1_CURR_DESC_PTR(val) bfin_write32(DMA1_CURR_DESC_PTR) +#define bfin_read_DMA1_CURR_ADDR() bfin_read32(DMA1_CURR_ADDR) +#define bfin_write_DMA1_CURR_ADDR(val) bfin_write32(DMA1_CURR_ADDR) +#define bfin_read_DMA1_IRQ_STATUS() bfin_read16(DMA1_IRQ_STATUS) +#define bfin_write_DMA1_IRQ_STATUS(val) bfin_write16(DMA1_IRQ_STATUS, val) +#define bfin_read_DMA1_PERIPHERAL_MAP() bfin_read16(DMA1_PERIPHERAL_MAP) +#define bfin_write_DMA1_PERIPHERAL_MAP(val) bfin_write16(DMA1_PERIPHERAL_MAP, val) +#define bfin_read_DMA1_CURR_X_COUNT() bfin_read16(DMA1_CURR_X_COUNT) +#define bfin_write_DMA1_CURR_X_COUNT(val) bfin_write16(DMA1_CURR_X_COUNT, val) +#define bfin_read_DMA1_CURR_Y_COUNT() bfin_read16(DMA1_CURR_Y_COUNT) +#define bfin_write_DMA1_CURR_Y_COUNT(val) bfin_write16(DMA1_CURR_Y_COUNT, val) + +/* DMA Channel 2 Registers */ + +#define bfin_read_DMA2_NEXT_DESC_PTR() bfin_read32(DMA2_NEXT_DESC_PTR) +#define bfin_write_DMA2_NEXT_DESC_PTR(val) bfin_write32(DMA2_NEXT_DESC_PTR) +#define bfin_read_DMA2_START_ADDR() bfin_read32(DMA2_START_ADDR) +#define bfin_write_DMA2_START_ADDR(val) bfin_write32(DMA2_START_ADDR) +#define bfin_read_DMA2_CONFIG() bfin_read16(DMA2_CONFIG) +#define bfin_write_DMA2_CONFIG(val) bfin_write16(DMA2_CONFIG, val) +#define bfin_read_DMA2_X_COUNT() bfin_read16(DMA2_X_COUNT) +#define bfin_write_DMA2_X_COUNT(val) bfin_write16(DMA2_X_COUNT, val) +#define bfin_read_DMA2_X_MODIFY() bfin_read16(DMA2_X_MODIFY) +#define bfin_write_DMA2_X_MODIFY(val) bfin_write16(DMA2_X_MODIFY) +#define bfin_read_DMA2_Y_COUNT() bfin_read16(DMA2_Y_COUNT) +#define bfin_write_DMA2_Y_COUNT(val) bfin_write16(DMA2_Y_COUNT, val) +#define bfin_read_DMA2_Y_MODIFY() bfin_read16(DMA2_Y_MODIFY) +#define bfin_write_DMA2_Y_MODIFY(val) bfin_write16(DMA2_Y_MODIFY) +#define bfin_read_DMA2_CURR_DESC_PTR() bfin_read32(DMA2_CURR_DESC_PTR) +#define bfin_write_DMA2_CURR_DESC_PTR(val) bfin_write32(DMA2_CURR_DESC_PTR) +#define bfin_read_DMA2_CURR_ADDR() bfin_read32(DMA2_CURR_ADDR) +#define bfin_write_DMA2_CURR_ADDR(val) bfin_write32(DMA2_CURR_ADDR) +#define bfin_read_DMA2_IRQ_STATUS() bfin_read16(DMA2_IRQ_STATUS) +#define bfin_write_DMA2_IRQ_STATUS(val) bfin_write16(DMA2_IRQ_STATUS, val) +#define bfin_read_DMA2_PERIPHERAL_MAP() bfin_read16(DMA2_PERIPHERAL_MAP) +#define bfin_write_DMA2_PERIPHERAL_MAP(val) bfin_write16(DMA2_PERIPHERAL_MAP, val) +#define bfin_read_DMA2_CURR_X_COUNT() bfin_read16(DMA2_CURR_X_COUNT) +#define bfin_write_DMA2_CURR_X_COUNT(val) bfin_write16(DMA2_CURR_X_COUNT, val) +#define bfin_read_DMA2_CURR_Y_COUNT() bfin_read16(DMA2_CURR_Y_COUNT) +#define bfin_write_DMA2_CURR_Y_COUNT(val) bfin_write16(DMA2_CURR_Y_COUNT, val) + +/* DMA Channel 3 Registers */ + +#define bfin_read_DMA3_NEXT_DESC_PTR() bfin_read32(DMA3_NEXT_DESC_PTR) +#define bfin_write_DMA3_NEXT_DESC_PTR(val) bfin_write32(DMA3_NEXT_DESC_PTR) +#define bfin_read_DMA3_START_ADDR() bfin_read32(DMA3_START_ADDR) +#define bfin_write_DMA3_START_ADDR(val) bfin_write32(DMA3_START_ADDR) +#define bfin_read_DMA3_CONFIG() bfin_read16(DMA3_CONFIG) +#define bfin_write_DMA3_CONFIG(val) bfin_write16(DMA3_CONFIG, val) +#define bfin_read_DMA3_X_COUNT() bfin_read16(DMA3_X_COUNT) +#define bfin_write_DMA3_X_COUNT(val) bfin_write16(DMA3_X_COUNT, val) +#define bfin_read_DMA3_X_MODIFY() bfin_read16(DMA3_X_MODIFY) +#define bfin_write_DMA3_X_MODIFY(val) bfin_write16(DMA3_X_MODIFY) +#define bfin_read_DMA3_Y_COUNT() bfin_read16(DMA3_Y_COUNT) +#define bfin_write_DMA3_Y_COUNT(val) bfin_write16(DMA3_Y_COUNT, val) +#define bfin_read_DMA3_Y_MODIFY() bfin_read16(DMA3_Y_MODIFY) +#define bfin_write_DMA3_Y_MODIFY(val) bfin_write16(DMA3_Y_MODIFY) +#define bfin_read_DMA3_CURR_DESC_PTR() bfin_read32(DMA3_CURR_DESC_PTR) +#define bfin_write_DMA3_CURR_DESC_PTR(val) bfin_write32(DMA3_CURR_DESC_PTR) +#define bfin_read_DMA3_CURR_ADDR() bfin_read32(DMA3_CURR_ADDR) +#define bfin_write_DMA3_CURR_ADDR(val) bfin_write32(DMA3_CURR_ADDR) +#define bfin_read_DMA3_IRQ_STATUS() bfin_read16(DMA3_IRQ_STATUS) +#define bfin_write_DMA3_IRQ_STATUS(val) bfin_write16(DMA3_IRQ_STATUS, val) +#define bfin_read_DMA3_PERIPHERAL_MAP() bfin_read16(DMA3_PERIPHERAL_MAP) +#define bfin_write_DMA3_PERIPHERAL_MAP(val) bfin_write16(DMA3_PERIPHERAL_MAP, val) +#define bfin_read_DMA3_CURR_X_COUNT() bfin_read16(DMA3_CURR_X_COUNT) +#define bfin_write_DMA3_CURR_X_COUNT(val) bfin_write16(DMA3_CURR_X_COUNT, val) +#define bfin_read_DMA3_CURR_Y_COUNT() bfin_read16(DMA3_CURR_Y_COUNT) +#define bfin_write_DMA3_CURR_Y_COUNT(val) bfin_write16(DMA3_CURR_Y_COUNT, val) + +/* DMA Channel 4 Registers */ + +#define bfin_read_DMA4_NEXT_DESC_PTR() bfin_read32(DMA4_NEXT_DESC_PTR) +#define bfin_write_DMA4_NEXT_DESC_PTR(val) bfin_write32(DMA4_NEXT_DESC_PTR) +#define bfin_read_DMA4_START_ADDR() bfin_read32(DMA4_START_ADDR) +#define bfin_write_DMA4_START_ADDR(val) bfin_write32(DMA4_START_ADDR) +#define bfin_read_DMA4_CONFIG() bfin_read16(DMA4_CONFIG) +#define bfin_write_DMA4_CONFIG(val) bfin_write16(DMA4_CONFIG, val) +#define bfin_read_DMA4_X_COUNT() bfin_read16(DMA4_X_COUNT) +#define bfin_write_DMA4_X_COUNT(val) bfin_write16(DMA4_X_COUNT, val) +#define bfin_read_DMA4_X_MODIFY() bfin_read16(DMA4_X_MODIFY) +#define bfin_write_DMA4_X_MODIFY(val) bfin_write16(DMA4_X_MODIFY) +#define bfin_read_DMA4_Y_COUNT() bfin_read16(DMA4_Y_COUNT) +#define bfin_write_DMA4_Y_COUNT(val) bfin_write16(DMA4_Y_COUNT, val) +#define bfin_read_DMA4_Y_MODIFY() bfin_read16(DMA4_Y_MODIFY) +#define bfin_write_DMA4_Y_MODIFY(val) bfin_write16(DMA4_Y_MODIFY) +#define bfin_read_DMA4_CURR_DESC_PTR() bfin_read32(DMA4_CURR_DESC_PTR) +#define bfin_write_DMA4_CURR_DESC_PTR(val) bfin_write32(DMA4_CURR_DESC_PTR) +#define bfin_read_DMA4_CURR_ADDR() bfin_read32(DMA4_CURR_ADDR) +#define bfin_write_DMA4_CURR_ADDR(val) bfin_write32(DMA4_CURR_ADDR) +#define bfin_read_DMA4_IRQ_STATUS() bfin_read16(DMA4_IRQ_STATUS) +#define bfin_write_DMA4_IRQ_STATUS(val) bfin_write16(DMA4_IRQ_STATUS, val) +#define bfin_read_DMA4_PERIPHERAL_MAP() bfin_read16(DMA4_PERIPHERAL_MAP) +#define bfin_write_DMA4_PERIPHERAL_MAP(val) bfin_write16(DMA4_PERIPHERAL_MAP, val) +#define bfin_read_DMA4_CURR_X_COUNT() bfin_read16(DMA4_CURR_X_COUNT) +#define bfin_write_DMA4_CURR_X_COUNT(val) bfin_write16(DMA4_CURR_X_COUNT, val) +#define bfin_read_DMA4_CURR_Y_COUNT() bfin_read16(DMA4_CURR_Y_COUNT) +#define bfin_write_DMA4_CURR_Y_COUNT(val) bfin_write16(DMA4_CURR_Y_COUNT, val) + +/* DMA Channel 5 Registers */ + +#define bfin_read_DMA5_NEXT_DESC_PTR() bfin_read32(DMA5_NEXT_DESC_PTR) +#define bfin_write_DMA5_NEXT_DESC_PTR(val) bfin_write32(DMA5_NEXT_DESC_PTR) +#define bfin_read_DMA5_START_ADDR() bfin_read32(DMA5_START_ADDR) +#define bfin_write_DMA5_START_ADDR(val) bfin_write32(DMA5_START_ADDR) +#define bfin_read_DMA5_CONFIG() bfin_read16(DMA5_CONFIG) +#define bfin_write_DMA5_CONFIG(val) bfin_write16(DMA5_CONFIG, val) +#define bfin_read_DMA5_X_COUNT() bfin_read16(DMA5_X_COUNT) +#define bfin_write_DMA5_X_COUNT(val) bfin_write16(DMA5_X_COUNT, val) +#define bfin_read_DMA5_X_MODIFY() bfin_read16(DMA5_X_MODIFY) +#define bfin_write_DMA5_X_MODIFY(val) bfin_write16(DMA5_X_MODIFY) +#define bfin_read_DMA5_Y_COUNT() bfin_read16(DMA5_Y_COUNT) +#define bfin_write_DMA5_Y_COUNT(val) bfin_write16(DMA5_Y_COUNT, val) +#define bfin_read_DMA5_Y_MODIFY() bfin_read16(DMA5_Y_MODIFY) +#define bfin_write_DMA5_Y_MODIFY(val) bfin_write16(DMA5_Y_MODIFY) +#define bfin_read_DMA5_CURR_DESC_PTR() bfin_read32(DMA5_CURR_DESC_PTR) +#define bfin_write_DMA5_CURR_DESC_PTR(val) bfin_write32(DMA5_CURR_DESC_PTR) +#define bfin_read_DMA5_CURR_ADDR() bfin_read32(DMA5_CURR_ADDR) +#define bfin_write_DMA5_CURR_ADDR(val) bfin_write32(DMA5_CURR_ADDR) +#define bfin_read_DMA5_IRQ_STATUS() bfin_read16(DMA5_IRQ_STATUS) +#define bfin_write_DMA5_IRQ_STATUS(val) bfin_write16(DMA5_IRQ_STATUS, val) +#define bfin_read_DMA5_PERIPHERAL_MAP() bfin_read16(DMA5_PERIPHERAL_MAP) +#define bfin_write_DMA5_PERIPHERAL_MAP(val) bfin_write16(DMA5_PERIPHERAL_MAP, val) +#define bfin_read_DMA5_CURR_X_COUNT() bfin_read16(DMA5_CURR_X_COUNT) +#define bfin_write_DMA5_CURR_X_COUNT(val) bfin_write16(DMA5_CURR_X_COUNT, val) +#define bfin_read_DMA5_CURR_Y_COUNT() bfin_read16(DMA5_CURR_Y_COUNT) +#define bfin_write_DMA5_CURR_Y_COUNT(val) bfin_write16(DMA5_CURR_Y_COUNT, val) + +/* DMA Channel 6 Registers */ + +#define bfin_read_DMA6_NEXT_DESC_PTR() bfin_read32(DMA6_NEXT_DESC_PTR) +#define bfin_write_DMA6_NEXT_DESC_PTR(val) bfin_write32(DMA6_NEXT_DESC_PTR) +#define bfin_read_DMA6_START_ADDR() bfin_read32(DMA6_START_ADDR) +#define bfin_write_DMA6_START_ADDR(val) bfin_write32(DMA6_START_ADDR) +#define bfin_read_DMA6_CONFIG() bfin_read16(DMA6_CONFIG) +#define bfin_write_DMA6_CONFIG(val) bfin_write16(DMA6_CONFIG, val) +#define bfin_read_DMA6_X_COUNT() bfin_read16(DMA6_X_COUNT) +#define bfin_write_DMA6_X_COUNT(val) bfin_write16(DMA6_X_COUNT, val) +#define bfin_read_DMA6_X_MODIFY() bfin_read16(DMA6_X_MODIFY) +#define bfin_write_DMA6_X_MODIFY(val) bfin_write16(DMA6_X_MODIFY) +#define bfin_read_DMA6_Y_COUNT() bfin_read16(DMA6_Y_COUNT) +#define bfin_write_DMA6_Y_COUNT(val) bfin_write16(DMA6_Y_COUNT, val) +#define bfin_read_DMA6_Y_MODIFY() bfin_read16(DMA6_Y_MODIFY) +#define bfin_write_DMA6_Y_MODIFY(val) bfin_write16(DMA6_Y_MODIFY) +#define bfin_read_DMA6_CURR_DESC_PTR() bfin_read32(DMA6_CURR_DESC_PTR) +#define bfin_write_DMA6_CURR_DESC_PTR(val) bfin_write32(DMA6_CURR_DESC_PTR) +#define bfin_read_DMA6_CURR_ADDR() bfin_read32(DMA6_CURR_ADDR) +#define bfin_write_DMA6_CURR_ADDR(val) bfin_write32(DMA6_CURR_ADDR) +#define bfin_read_DMA6_IRQ_STATUS() bfin_read16(DMA6_IRQ_STATUS) +#define bfin_write_DMA6_IRQ_STATUS(val) bfin_write16(DMA6_IRQ_STATUS, val) +#define bfin_read_DMA6_PERIPHERAL_MAP() bfin_read16(DMA6_PERIPHERAL_MAP) +#define bfin_write_DMA6_PERIPHERAL_MAP(val) bfin_write16(DMA6_PERIPHERAL_MAP, val) +#define bfin_read_DMA6_CURR_X_COUNT() bfin_read16(DMA6_CURR_X_COUNT) +#define bfin_write_DMA6_CURR_X_COUNT(val) bfin_write16(DMA6_CURR_X_COUNT, val) +#define bfin_read_DMA6_CURR_Y_COUNT() bfin_read16(DMA6_CURR_Y_COUNT) +#define bfin_write_DMA6_CURR_Y_COUNT(val) bfin_write16(DMA6_CURR_Y_COUNT, val) + +/* DMA Channel 7 Registers */ + +#define bfin_read_DMA7_NEXT_DESC_PTR() bfin_read32(DMA7_NEXT_DESC_PTR) +#define bfin_write_DMA7_NEXT_DESC_PTR(val) bfin_write32(DMA7_NEXT_DESC_PTR) +#define bfin_read_DMA7_START_ADDR() bfin_read32(DMA7_START_ADDR) +#define bfin_write_DMA7_START_ADDR(val) bfin_write32(DMA7_START_ADDR) +#define bfin_read_DMA7_CONFIG() bfin_read16(DMA7_CONFIG) +#define bfin_write_DMA7_CONFIG(val) bfin_write16(DMA7_CONFIG, val) +#define bfin_read_DMA7_X_COUNT() bfin_read16(DMA7_X_COUNT) +#define bfin_write_DMA7_X_COUNT(val) bfin_write16(DMA7_X_COUNT, val) +#define bfin_read_DMA7_X_MODIFY() bfin_read16(DMA7_X_MODIFY) +#define bfin_write_DMA7_X_MODIFY(val) bfin_write16(DMA7_X_MODIFY) +#define bfin_read_DMA7_Y_COUNT() bfin_read16(DMA7_Y_COUNT) +#define bfin_write_DMA7_Y_COUNT(val) bfin_write16(DMA7_Y_COUNT, val) +#define bfin_read_DMA7_Y_MODIFY() bfin_read16(DMA7_Y_MODIFY) +#define bfin_write_DMA7_Y_MODIFY(val) bfin_write16(DMA7_Y_MODIFY) +#define bfin_read_DMA7_CURR_DESC_PTR() bfin_read32(DMA7_CURR_DESC_PTR) +#define bfin_write_DMA7_CURR_DESC_PTR(val) bfin_write32(DMA7_CURR_DESC_PTR) +#define bfin_read_DMA7_CURR_ADDR() bfin_read32(DMA7_CURR_ADDR) +#define bfin_write_DMA7_CURR_ADDR(val) bfin_write32(DMA7_CURR_ADDR) +#define bfin_read_DMA7_IRQ_STATUS() bfin_read16(DMA7_IRQ_STATUS) +#define bfin_write_DMA7_IRQ_STATUS(val) bfin_write16(DMA7_IRQ_STATUS, val) +#define bfin_read_DMA7_PERIPHERAL_MAP() bfin_read16(DMA7_PERIPHERAL_MAP) +#define bfin_write_DMA7_PERIPHERAL_MAP(val) bfin_write16(DMA7_PERIPHERAL_MAP, val) +#define bfin_read_DMA7_CURR_X_COUNT() bfin_read16(DMA7_CURR_X_COUNT) +#define bfin_write_DMA7_CURR_X_COUNT(val) bfin_write16(DMA7_CURR_X_COUNT, val) +#define bfin_read_DMA7_CURR_Y_COUNT() bfin_read16(DMA7_CURR_Y_COUNT) +#define bfin_write_DMA7_CURR_Y_COUNT(val) bfin_write16(DMA7_CURR_Y_COUNT, val) + +/* DMA Channel 8 Registers */ + +#define bfin_read_DMA8_NEXT_DESC_PTR() bfin_read32(DMA8_NEXT_DESC_PTR) +#define bfin_write_DMA8_NEXT_DESC_PTR(val) bfin_write32(DMA8_NEXT_DESC_PTR) +#define bfin_read_DMA8_START_ADDR() bfin_read32(DMA8_START_ADDR) +#define bfin_write_DMA8_START_ADDR(val) bfin_write32(DMA8_START_ADDR) +#define bfin_read_DMA8_CONFIG() bfin_read16(DMA8_CONFIG) +#define bfin_write_DMA8_CONFIG(val) bfin_write16(DMA8_CONFIG, val) +#define bfin_read_DMA8_X_COUNT() bfin_read16(DMA8_X_COUNT) +#define bfin_write_DMA8_X_COUNT(val) bfin_write16(DMA8_X_COUNT, val) +#define bfin_read_DMA8_X_MODIFY() bfin_read16(DMA8_X_MODIFY) +#define bfin_write_DMA8_X_MODIFY(val) bfin_write16(DMA8_X_MODIFY) +#define bfin_read_DMA8_Y_COUNT() bfin_read16(DMA8_Y_COUNT) +#define bfin_write_DMA8_Y_COUNT(val) bfin_write16(DMA8_Y_COUNT, val) +#define bfin_read_DMA8_Y_MODIFY() bfin_read16(DMA8_Y_MODIFY) +#define bfin_write_DMA8_Y_MODIFY(val) bfin_write16(DMA8_Y_MODIFY) +#define bfin_read_DMA8_CURR_DESC_PTR() bfin_read32(DMA8_CURR_DESC_PTR) +#define bfin_write_DMA8_CURR_DESC_PTR(val) bfin_write32(DMA8_CURR_DESC_PTR) +#define bfin_read_DMA8_CURR_ADDR() bfin_read32(DMA8_CURR_ADDR) +#define bfin_write_DMA8_CURR_ADDR(val) bfin_write32(DMA8_CURR_ADDR) +#define bfin_read_DMA8_IRQ_STATUS() bfin_read16(DMA8_IRQ_STATUS) +#define bfin_write_DMA8_IRQ_STATUS(val) bfin_write16(DMA8_IRQ_STATUS, val) +#define bfin_read_DMA8_PERIPHERAL_MAP() bfin_read16(DMA8_PERIPHERAL_MAP) +#define bfin_write_DMA8_PERIPHERAL_MAP(val) bfin_write16(DMA8_PERIPHERAL_MAP, val) +#define bfin_read_DMA8_CURR_X_COUNT() bfin_read16(DMA8_CURR_X_COUNT) +#define bfin_write_DMA8_CURR_X_COUNT(val) bfin_write16(DMA8_CURR_X_COUNT, val) +#define bfin_read_DMA8_CURR_Y_COUNT() bfin_read16(DMA8_CURR_Y_COUNT) +#define bfin_write_DMA8_CURR_Y_COUNT(val) bfin_write16(DMA8_CURR_Y_COUNT, val) + +/* DMA Channel 9 Registers */ + +#define bfin_read_DMA9_NEXT_DESC_PTR() bfin_read32(DMA9_NEXT_DESC_PTR) +#define bfin_write_DMA9_NEXT_DESC_PTR(val) bfin_write32(DMA9_NEXT_DESC_PTR) +#define bfin_read_DMA9_START_ADDR() bfin_read32(DMA9_START_ADDR) +#define bfin_write_DMA9_START_ADDR(val) bfin_write32(DMA9_START_ADDR) +#define bfin_read_DMA9_CONFIG() bfin_read16(DMA9_CONFIG) +#define bfin_write_DMA9_CONFIG(val) bfin_write16(DMA9_CONFIG, val) +#define bfin_read_DMA9_X_COUNT() bfin_read16(DMA9_X_COUNT) +#define bfin_write_DMA9_X_COUNT(val) bfin_write16(DMA9_X_COUNT, val) +#define bfin_read_DMA9_X_MODIFY() bfin_read16(DMA9_X_MODIFY) +#define bfin_write_DMA9_X_MODIFY(val) bfin_write16(DMA9_X_MODIFY) +#define bfin_read_DMA9_Y_COUNT() bfin_read16(DMA9_Y_COUNT) +#define bfin_write_DMA9_Y_COUNT(val) bfin_write16(DMA9_Y_COUNT, val) +#define bfin_read_DMA9_Y_MODIFY() bfin_read16(DMA9_Y_MODIFY) +#define bfin_write_DMA9_Y_MODIFY(val) bfin_write16(DMA9_Y_MODIFY) +#define bfin_read_DMA9_CURR_DESC_PTR() bfin_read32(DMA9_CURR_DESC_PTR) +#define bfin_write_DMA9_CURR_DESC_PTR(val) bfin_write32(DMA9_CURR_DESC_PTR) +#define bfin_read_DMA9_CURR_ADDR() bfin_read32(DMA9_CURR_ADDR) +#define bfin_write_DMA9_CURR_ADDR(val) bfin_write32(DMA9_CURR_ADDR) +#define bfin_read_DMA9_IRQ_STATUS() bfin_read16(DMA9_IRQ_STATUS) +#define bfin_write_DMA9_IRQ_STATUS(val) bfin_write16(DMA9_IRQ_STATUS, val) +#define bfin_read_DMA9_PERIPHERAL_MAP() bfin_read16(DMA9_PERIPHERAL_MAP) +#define bfin_write_DMA9_PERIPHERAL_MAP(val) bfin_write16(DMA9_PERIPHERAL_MAP, val) +#define bfin_read_DMA9_CURR_X_COUNT() bfin_read16(DMA9_CURR_X_COUNT) +#define bfin_write_DMA9_CURR_X_COUNT(val) bfin_write16(DMA9_CURR_X_COUNT, val) +#define bfin_read_DMA9_CURR_Y_COUNT() bfin_read16(DMA9_CURR_Y_COUNT) +#define bfin_write_DMA9_CURR_Y_COUNT(val) bfin_write16(DMA9_CURR_Y_COUNT, val) + +/* DMA Channel 10 Registers */ + +#define bfin_read_DMA10_NEXT_DESC_PTR() bfin_read32(DMA10_NEXT_DESC_PTR) +#define bfin_write_DMA10_NEXT_DESC_PTR(val) bfin_write32(DMA10_NEXT_DESC_PTR) +#define bfin_read_DMA10_START_ADDR() bfin_read32(DMA10_START_ADDR) +#define bfin_write_DMA10_START_ADDR(val) bfin_write32(DMA10_START_ADDR) +#define bfin_read_DMA10_CONFIG() bfin_read16(DMA10_CONFIG) +#define bfin_write_DMA10_CONFIG(val) bfin_write16(DMA10_CONFIG, val) +#define bfin_read_DMA10_X_COUNT() bfin_read16(DMA10_X_COUNT) +#define bfin_write_DMA10_X_COUNT(val) bfin_write16(DMA10_X_COUNT, val) +#define bfin_read_DMA10_X_MODIFY() bfin_read16(DMA10_X_MODIFY) +#define bfin_write_DMA10_X_MODIFY(val) bfin_write16(DMA10_X_MODIFY) +#define bfin_read_DMA10_Y_COUNT() bfin_read16(DMA10_Y_COUNT) +#define bfin_write_DMA10_Y_COUNT(val) bfin_write16(DMA10_Y_COUNT, val) +#define bfin_read_DMA10_Y_MODIFY() bfin_read16(DMA10_Y_MODIFY) +#define bfin_write_DMA10_Y_MODIFY(val) bfin_write16(DMA10_Y_MODIFY) +#define bfin_read_DMA10_CURR_DESC_PTR() bfin_read32(DMA10_CURR_DESC_PTR) +#define bfin_write_DMA10_CURR_DESC_PTR(val) bfin_write32(DMA10_CURR_DESC_PTR) +#define bfin_read_DMA10_CURR_ADDR() bfin_read32(DMA10_CURR_ADDR) +#define bfin_write_DMA10_CURR_ADDR(val) bfin_write32(DMA10_CURR_ADDR) +#define bfin_read_DMA10_IRQ_STATUS() bfin_read16(DMA10_IRQ_STATUS) +#define bfin_write_DMA10_IRQ_STATUS(val) bfin_write16(DMA10_IRQ_STATUS, val) +#define bfin_read_DMA10_PERIPHERAL_MAP() bfin_read16(DMA10_PERIPHERAL_MAP) +#define bfin_write_DMA10_PERIPHERAL_MAP(val) bfin_write16(DMA10_PERIPHERAL_MAP, val) +#define bfin_read_DMA10_CURR_X_COUNT() bfin_read16(DMA10_CURR_X_COUNT) +#define bfin_write_DMA10_CURR_X_COUNT(val) bfin_write16(DMA10_CURR_X_COUNT, val) +#define bfin_read_DMA10_CURR_Y_COUNT() bfin_read16(DMA10_CURR_Y_COUNT) +#define bfin_write_DMA10_CURR_Y_COUNT(val) bfin_write16(DMA10_CURR_Y_COUNT, val) + +/* DMA Channel 11 Registers */ + +#define bfin_read_DMA11_NEXT_DESC_PTR() bfin_read32(DMA11_NEXT_DESC_PTR) +#define bfin_write_DMA11_NEXT_DESC_PTR(val) bfin_write32(DMA11_NEXT_DESC_PTR) +#define bfin_read_DMA11_START_ADDR() bfin_read32(DMA11_START_ADDR) +#define bfin_write_DMA11_START_ADDR(val) bfin_write32(DMA11_START_ADDR) +#define bfin_read_DMA11_CONFIG() bfin_read16(DMA11_CONFIG) +#define bfin_write_DMA11_CONFIG(val) bfin_write16(DMA11_CONFIG, val) +#define bfin_read_DMA11_X_COUNT() bfin_read16(DMA11_X_COUNT) +#define bfin_write_DMA11_X_COUNT(val) bfin_write16(DMA11_X_COUNT, val) +#define bfin_read_DMA11_X_MODIFY() bfin_read16(DMA11_X_MODIFY) +#define bfin_write_DMA11_X_MODIFY(val) bfin_write16(DMA11_X_MODIFY) +#define bfin_read_DMA11_Y_COUNT() bfin_read16(DMA11_Y_COUNT) +#define bfin_write_DMA11_Y_COUNT(val) bfin_write16(DMA11_Y_COUNT, val) +#define bfin_read_DMA11_Y_MODIFY() bfin_read16(DMA11_Y_MODIFY) +#define bfin_write_DMA11_Y_MODIFY(val) bfin_write16(DMA11_Y_MODIFY) +#define bfin_read_DMA11_CURR_DESC_PTR() bfin_read32(DMA11_CURR_DESC_PTR) +#define bfin_write_DMA11_CURR_DESC_PTR(val) bfin_write32(DMA11_CURR_DESC_PTR) +#define bfin_read_DMA11_CURR_ADDR() bfin_read32(DMA11_CURR_ADDR) +#define bfin_write_DMA11_CURR_ADDR(val) bfin_write32(DMA11_CURR_ADDR) +#define bfin_read_DMA11_IRQ_STATUS() bfin_read16(DMA11_IRQ_STATUS) +#define bfin_write_DMA11_IRQ_STATUS(val) bfin_write16(DMA11_IRQ_STATUS, val) +#define bfin_read_DMA11_PERIPHERAL_MAP() bfin_read16(DMA11_PERIPHERAL_MAP) +#define bfin_write_DMA11_PERIPHERAL_MAP(val) bfin_write16(DMA11_PERIPHERAL_MAP, val) +#define bfin_read_DMA11_CURR_X_COUNT() bfin_read16(DMA11_CURR_X_COUNT) +#define bfin_write_DMA11_CURR_X_COUNT(val) bfin_write16(DMA11_CURR_X_COUNT, val) +#define bfin_read_DMA11_CURR_Y_COUNT() bfin_read16(DMA11_CURR_Y_COUNT) +#define bfin_write_DMA11_CURR_Y_COUNT(val) bfin_write16(DMA11_CURR_Y_COUNT, val) + +/* MDMA Stream 0 Registers */ + +#define bfin_read_MDMA_D0_NEXT_DESC_PTR() bfin_read32(MDMA_D0_NEXT_DESC_PTR) +#define bfin_write_MDMA_D0_NEXT_DESC_PTR(val) bfin_write32(MDMA_D0_NEXT_DESC_PTR) +#define bfin_read_MDMA_D0_START_ADDR() bfin_read32(MDMA_D0_START_ADDR) +#define bfin_write_MDMA_D0_START_ADDR(val) bfin_write32(MDMA_D0_START_ADDR) +#define bfin_read_MDMA_D0_CONFIG() bfin_read16(MDMA_D0_CONFIG) +#define bfin_write_MDMA_D0_CONFIG(val) bfin_write16(MDMA_D0_CONFIG, val) +#define bfin_read_MDMA_D0_X_COUNT() bfin_read16(MDMA_D0_X_COUNT) +#define bfin_write_MDMA_D0_X_COUNT(val) bfin_write16(MDMA_D0_X_COUNT, val) +#define bfin_read_MDMA_D0_X_MODIFY() bfin_read16(MDMA_D0_X_MODIFY) +#define bfin_write_MDMA_D0_X_MODIFY(val) bfin_write16(MDMA_D0_X_MODIFY) +#define bfin_read_MDMA_D0_Y_COUNT() bfin_read16(MDMA_D0_Y_COUNT) +#define bfin_write_MDMA_D0_Y_COUNT(val) bfin_write16(MDMA_D0_Y_COUNT, val) +#define bfin_read_MDMA_D0_Y_MODIFY() bfin_read16(MDMA_D0_Y_MODIFY) +#define bfin_write_MDMA_D0_Y_MODIFY(val) bfin_write16(MDMA_D0_Y_MODIFY) +#define bfin_read_MDMA_D0_CURR_DESC_PTR() bfin_read32(MDMA_D0_CURR_DESC_PTR) +#define bfin_write_MDMA_D0_CURR_DESC_PTR(val) bfin_write32(MDMA_D0_CURR_DESC_PTR) +#define bfin_read_MDMA_D0_CURR_ADDR() bfin_read32(MDMA_D0_CURR_ADDR) +#define bfin_write_MDMA_D0_CURR_ADDR(val) bfin_write32(MDMA_D0_CURR_ADDR) +#define bfin_read_MDMA_D0_IRQ_STATUS() bfin_read16(MDMA_D0_IRQ_STATUS) +#define bfin_write_MDMA_D0_IRQ_STATUS(val) bfin_write16(MDMA_D0_IRQ_STATUS, val) +#define bfin_read_MDMA_D0_PERIPHERAL_MAP() bfin_read16(MDMA_D0_PERIPHERAL_MAP) +#define bfin_write_MDMA_D0_PERIPHERAL_MAP(val) bfin_write16(MDMA_D0_PERIPHERAL_MAP, val) +#define bfin_read_MDMA_D0_CURR_X_COUNT() bfin_read16(MDMA_D0_CURR_X_COUNT) +#define bfin_write_MDMA_D0_CURR_X_COUNT(val) bfin_write16(MDMA_D0_CURR_X_COUNT, val) +#define bfin_read_MDMA_D0_CURR_Y_COUNT() bfin_read16(MDMA_D0_CURR_Y_COUNT) +#define bfin_write_MDMA_D0_CURR_Y_COUNT(val) bfin_write16(MDMA_D0_CURR_Y_COUNT, val) +#define bfin_read_MDMA_S0_NEXT_DESC_PTR() bfin_read32(MDMA_S0_NEXT_DESC_PTR) +#define bfin_write_MDMA_S0_NEXT_DESC_PTR(val) bfin_write32(MDMA_S0_NEXT_DESC_PTR) +#define bfin_read_MDMA_S0_START_ADDR() bfin_read32(MDMA_S0_START_ADDR) +#define bfin_write_MDMA_S0_START_ADDR(val) bfin_write32(MDMA_S0_START_ADDR) +#define bfin_read_MDMA_S0_CONFIG() bfin_read16(MDMA_S0_CONFIG) +#define bfin_write_MDMA_S0_CONFIG(val) bfin_write16(MDMA_S0_CONFIG, val) +#define bfin_read_MDMA_S0_X_COUNT() bfin_read16(MDMA_S0_X_COUNT) +#define bfin_write_MDMA_S0_X_COUNT(val) bfin_write16(MDMA_S0_X_COUNT, val) +#define bfin_read_MDMA_S0_X_MODIFY() bfin_read16(MDMA_S0_X_MODIFY) +#define bfin_write_MDMA_S0_X_MODIFY(val) bfin_write16(MDMA_S0_X_MODIFY) +#define bfin_read_MDMA_S0_Y_COUNT() bfin_read16(MDMA_S0_Y_COUNT) +#define bfin_write_MDMA_S0_Y_COUNT(val) bfin_write16(MDMA_S0_Y_COUNT, val) +#define bfin_read_MDMA_S0_Y_MODIFY() bfin_read16(MDMA_S0_Y_MODIFY) +#define bfin_write_MDMA_S0_Y_MODIFY(val) bfin_write16(MDMA_S0_Y_MODIFY) +#define bfin_read_MDMA_S0_CURR_DESC_PTR() bfin_read32(MDMA_S0_CURR_DESC_PTR) +#define bfin_write_MDMA_S0_CURR_DESC_PTR(val) bfin_write32(MDMA_S0_CURR_DESC_PTR) +#define bfin_read_MDMA_S0_CURR_ADDR() bfin_read32(MDMA_S0_CURR_ADDR) +#define bfin_write_MDMA_S0_CURR_ADDR(val) bfin_write32(MDMA_S0_CURR_ADDR) +#define bfin_read_MDMA_S0_IRQ_STATUS() bfin_read16(MDMA_S0_IRQ_STATUS) +#define bfin_write_MDMA_S0_IRQ_STATUS(val) bfin_write16(MDMA_S0_IRQ_STATUS, val) +#define bfin_read_MDMA_S0_PERIPHERAL_MAP() bfin_read16(MDMA_S0_PERIPHERAL_MAP) +#define bfin_write_MDMA_S0_PERIPHERAL_MAP(val) bfin_write16(MDMA_S0_PERIPHERAL_MAP, val) +#define bfin_read_MDMA_S0_CURR_X_COUNT() bfin_read16(MDMA_S0_CURR_X_COUNT) +#define bfin_write_MDMA_S0_CURR_X_COUNT(val) bfin_write16(MDMA_S0_CURR_X_COUNT, val) +#define bfin_read_MDMA_S0_CURR_Y_COUNT() bfin_read16(MDMA_S0_CURR_Y_COUNT) +#define bfin_write_MDMA_S0_CURR_Y_COUNT(val) bfin_write16(MDMA_S0_CURR_Y_COUNT, val) + +/* MDMA Stream 1 Registers */ + +#define bfin_read_MDMA_D1_NEXT_DESC_PTR() bfin_read32(MDMA_D1_NEXT_DESC_PTR) +#define bfin_write_MDMA_D1_NEXT_DESC_PTR(val) bfin_write32(MDMA_D1_NEXT_DESC_PTR) +#define bfin_read_MDMA_D1_START_ADDR() bfin_read32(MDMA_D1_START_ADDR) +#define bfin_write_MDMA_D1_START_ADDR(val) bfin_write32(MDMA_D1_START_ADDR) +#define bfin_read_MDMA_D1_CONFIG() bfin_read16(MDMA_D1_CONFIG) +#define bfin_write_MDMA_D1_CONFIG(val) bfin_write16(MDMA_D1_CONFIG, val) +#define bfin_read_MDMA_D1_X_COUNT() bfin_read16(MDMA_D1_X_COUNT) +#define bfin_write_MDMA_D1_X_COUNT(val) bfin_write16(MDMA_D1_X_COUNT, val) +#define bfin_read_MDMA_D1_X_MODIFY() bfin_read16(MDMA_D1_X_MODIFY) +#define bfin_write_MDMA_D1_X_MODIFY(val) bfin_write16(MDMA_D1_X_MODIFY) +#define bfin_read_MDMA_D1_Y_COUNT() bfin_read16(MDMA_D1_Y_COUNT) +#define bfin_write_MDMA_D1_Y_COUNT(val) bfin_write16(MDMA_D1_Y_COUNT, val) +#define bfin_read_MDMA_D1_Y_MODIFY() bfin_read16(MDMA_D1_Y_MODIFY) +#define bfin_write_MDMA_D1_Y_MODIFY(val) bfin_write16(MDMA_D1_Y_MODIFY) +#define bfin_read_MDMA_D1_CURR_DESC_PTR() bfin_read32(MDMA_D1_CURR_DESC_PTR) +#define bfin_write_MDMA_D1_CURR_DESC_PTR(val) bfin_write32(MDMA_D1_CURR_DESC_PTR) +#define bfin_read_MDMA_D1_CURR_ADDR() bfin_read32(MDMA_D1_CURR_ADDR) +#define bfin_write_MDMA_D1_CURR_ADDR(val) bfin_write32(MDMA_D1_CURR_ADDR) +#define bfin_read_MDMA_D1_IRQ_STATUS() bfin_read16(MDMA_D1_IRQ_STATUS) +#define bfin_write_MDMA_D1_IRQ_STATUS(val) bfin_write16(MDMA_D1_IRQ_STATUS, val) +#define bfin_read_MDMA_D1_PERIPHERAL_MAP() bfin_read16(MDMA_D1_PERIPHERAL_MAP) +#define bfin_write_MDMA_D1_PERIPHERAL_MAP(val) bfin_write16(MDMA_D1_PERIPHERAL_MAP, val) +#define bfin_read_MDMA_D1_CURR_X_COUNT() bfin_read16(MDMA_D1_CURR_X_COUNT) +#define bfin_write_MDMA_D1_CURR_X_COUNT(val) bfin_write16(MDMA_D1_CURR_X_COUNT, val) +#define bfin_read_MDMA_D1_CURR_Y_COUNT() bfin_read16(MDMA_D1_CURR_Y_COUNT) +#define bfin_write_MDMA_D1_CURR_Y_COUNT(val) bfin_write16(MDMA_D1_CURR_Y_COUNT, val) +#define bfin_read_MDMA_S1_NEXT_DESC_PTR() bfin_read32(MDMA_S1_NEXT_DESC_PTR) +#define bfin_write_MDMA_S1_NEXT_DESC_PTR(val) bfin_write32(MDMA_S1_NEXT_DESC_PTR) +#define bfin_read_MDMA_S1_START_ADDR() bfin_read32(MDMA_S1_START_ADDR) +#define bfin_write_MDMA_S1_START_ADDR(val) bfin_write32(MDMA_S1_START_ADDR) +#define bfin_read_MDMA_S1_CONFIG() bfin_read16(MDMA_S1_CONFIG) +#define bfin_write_MDMA_S1_CONFIG(val) bfin_write16(MDMA_S1_CONFIG, val) +#define bfin_read_MDMA_S1_X_COUNT() bfin_read16(MDMA_S1_X_COUNT) +#define bfin_write_MDMA_S1_X_COUNT(val) bfin_write16(MDMA_S1_X_COUNT, val) +#define bfin_read_MDMA_S1_X_MODIFY() bfin_read16(MDMA_S1_X_MODIFY) +#define bfin_write_MDMA_S1_X_MODIFY(val) bfin_write16(MDMA_S1_X_MODIFY) +#define bfin_read_MDMA_S1_Y_COUNT() bfin_read16(MDMA_S1_Y_COUNT) +#define bfin_write_MDMA_S1_Y_COUNT(val) bfin_write16(MDMA_S1_Y_COUNT, val) +#define bfin_read_MDMA_S1_Y_MODIFY() bfin_read16(MDMA_S1_Y_MODIFY) +#define bfin_write_MDMA_S1_Y_MODIFY(val) bfin_write16(MDMA_S1_Y_MODIFY) +#define bfin_read_MDMA_S1_CURR_DESC_PTR() bfin_read32(MDMA_S1_CURR_DESC_PTR) +#define bfin_write_MDMA_S1_CURR_DESC_PTR(val) bfin_write32(MDMA_S1_CURR_DESC_PTR) +#define bfin_read_MDMA_S1_CURR_ADDR() bfin_read32(MDMA_S1_CURR_ADDR) +#define bfin_write_MDMA_S1_CURR_ADDR(val) bfin_write32(MDMA_S1_CURR_ADDR) +#define bfin_read_MDMA_S1_IRQ_STATUS() bfin_read16(MDMA_S1_IRQ_STATUS) +#define bfin_write_MDMA_S1_IRQ_STATUS(val) bfin_write16(MDMA_S1_IRQ_STATUS, val) +#define bfin_read_MDMA_S1_PERIPHERAL_MAP() bfin_read16(MDMA_S1_PERIPHERAL_MAP) +#define bfin_write_MDMA_S1_PERIPHERAL_MAP(val) bfin_write16(MDMA_S1_PERIPHERAL_MAP, val) +#define bfin_read_MDMA_S1_CURR_X_COUNT() bfin_read16(MDMA_S1_CURR_X_COUNT) +#define bfin_write_MDMA_S1_CURR_X_COUNT(val) bfin_write16(MDMA_S1_CURR_X_COUNT, val) +#define bfin_read_MDMA_S1_CURR_Y_COUNT() bfin_read16(MDMA_S1_CURR_Y_COUNT) +#define bfin_write_MDMA_S1_CURR_Y_COUNT(val) bfin_write16(MDMA_S1_CURR_Y_COUNT, val) + +/* EPPI1 Registers */ + +#define bfin_read_EPPI1_STATUS() bfin_read16(EPPI1_STATUS) +#define bfin_write_EPPI1_STATUS(val) bfin_write16(EPPI1_STATUS, val) +#define bfin_read_EPPI1_HCOUNT() bfin_read16(EPPI1_HCOUNT) +#define bfin_write_EPPI1_HCOUNT(val) bfin_write16(EPPI1_HCOUNT, val) +#define bfin_read_EPPI1_HDELAY() bfin_read16(EPPI1_HDELAY) +#define bfin_write_EPPI1_HDELAY(val) bfin_write16(EPPI1_HDELAY, val) +#define bfin_read_EPPI1_VCOUNT() bfin_read16(EPPI1_VCOUNT) +#define bfin_write_EPPI1_VCOUNT(val) bfin_write16(EPPI1_VCOUNT, val) +#define bfin_read_EPPI1_VDELAY() bfin_read16(EPPI1_VDELAY) +#define bfin_write_EPPI1_VDELAY(val) bfin_write16(EPPI1_VDELAY, val) +#define bfin_read_EPPI1_FRAME() bfin_read16(EPPI1_FRAME) +#define bfin_write_EPPI1_FRAME(val) bfin_write16(EPPI1_FRAME, val) +#define bfin_read_EPPI1_LINE() bfin_read16(EPPI1_LINE) +#define bfin_write_EPPI1_LINE(val) bfin_write16(EPPI1_LINE, val) +#define bfin_read_EPPI1_CLKDIV() bfin_read16(EPPI1_CLKDIV) +#define bfin_write_EPPI1_CLKDIV(val) bfin_write16(EPPI1_CLKDIV, val) +#define bfin_read_EPPI1_CONTROL() bfin_read32(EPPI1_CONTROL) +#define bfin_write_EPPI1_CONTROL(val) bfin_write32(EPPI1_CONTROL, val) +#define bfin_read_EPPI1_FS1W_HBL() bfin_read32(EPPI1_FS1W_HBL) +#define bfin_write_EPPI1_FS1W_HBL(val) bfin_write32(EPPI1_FS1W_HBL, val) +#define bfin_read_EPPI1_FS1P_AVPL() bfin_read32(EPPI1_FS1P_AVPL) +#define bfin_write_EPPI1_FS1P_AVPL(val) bfin_write32(EPPI1_FS1P_AVPL, val) +#define bfin_read_EPPI1_FS2W_LVB() bfin_read32(EPPI1_FS2W_LVB) +#define bfin_write_EPPI1_FS2W_LVB(val) bfin_write32(EPPI1_FS2W_LVB, val) +#define bfin_read_EPPI1_FS2P_LAVF() bfin_read32(EPPI1_FS2P_LAVF) +#define bfin_write_EPPI1_FS2P_LAVF(val) bfin_write32(EPPI1_FS2P_LAVF, val) +#define bfin_read_EPPI1_CLIP() bfin_read32(EPPI1_CLIP) +#define bfin_write_EPPI1_CLIP(val) bfin_write32(EPPI1_CLIP, val) + +/* Port Interrubfin_read_()t 0 Registers (32-bit) */ + +#define bfin_read_PINT0_MASK_SET() bfin_read32(PINT0_MASK_SET) +#define bfin_write_PINT0_MASK_SET(val) bfin_write32(PINT0_MASK_SET, val) +#define bfin_read_PINT0_MASK_CLEAR() bfin_read32(PINT0_MASK_CLEAR) +#define bfin_write_PINT0_MASK_CLEAR(val) bfin_write32(PINT0_MASK_CLEAR, val) +#define bfin_read_PINT0_REQUEST() bfin_read32(PINT0_REQUEST) +#define bfin_write_PINT0_REQUEST(val) bfin_write32(PINT0_REQUEST, val) +#define bfin_read_PINT0_ASSIGN() bfin_read32(PINT0_ASSIGN) +#define bfin_write_PINT0_ASSIGN(val) bfin_write32(PINT0_ASSIGN, val) +#define bfin_read_PINT0_EDGE_SET() bfin_read32(PINT0_EDGE_SET) +#define bfin_write_PINT0_EDGE_SET(val) bfin_write32(PINT0_EDGE_SET, val) +#define bfin_read_PINT0_EDGE_CLEAR() bfin_read32(PINT0_EDGE_CLEAR) +#define bfin_write_PINT0_EDGE_CLEAR(val) bfin_write32(PINT0_EDGE_CLEAR, val) +#define bfin_read_PINT0_INVERT_SET() bfin_read32(PINT0_INVERT_SET) +#define bfin_write_PINT0_INVERT_SET(val) bfin_write32(PINT0_INVERT_SET, val) +#define bfin_read_PINT0_INVERT_CLEAR() bfin_read32(PINT0_INVERT_CLEAR) +#define bfin_write_PINT0_INVERT_CLEAR(val) bfin_write32(PINT0_INVERT_CLEAR, val) +#define bfin_read_PINT0_PINSTATE() bfin_read32(PINT0_PINSTATE) +#define bfin_write_PINT0_PINSTATE(val) bfin_write32(PINT0_PINSTATE, val) +#define bfin_read_PINT0_LATCH() bfin_read32(PINT0_LATCH) +#define bfin_write_PINT0_LATCH(val) bfin_write32(PINT0_LATCH, val) + +/* Port Interrubfin_read_()t 1 Registers (32-bit) */ + +#define bfin_read_PINT1_MASK_SET() bfin_read32(PINT1_MASK_SET) +#define bfin_write_PINT1_MASK_SET(val) bfin_write32(PINT1_MASK_SET, val) +#define bfin_read_PINT1_MASK_CLEAR() bfin_read32(PINT1_MASK_CLEAR) +#define bfin_write_PINT1_MASK_CLEAR(val) bfin_write32(PINT1_MASK_CLEAR, val) +#define bfin_read_PINT1_REQUEST() bfin_read32(PINT1_REQUEST) +#define bfin_write_PINT1_REQUEST(val) bfin_write32(PINT1_REQUEST, val) +#define bfin_read_PINT1_ASSIGN() bfin_read32(PINT1_ASSIGN) +#define bfin_write_PINT1_ASSIGN(val) bfin_write32(PINT1_ASSIGN, val) +#define bfin_read_PINT1_EDGE_SET() bfin_read32(PINT1_EDGE_SET) +#define bfin_write_PINT1_EDGE_SET(val) bfin_write32(PINT1_EDGE_SET, val) +#define bfin_read_PINT1_EDGE_CLEAR() bfin_read32(PINT1_EDGE_CLEAR) +#define bfin_write_PINT1_EDGE_CLEAR(val) bfin_write32(PINT1_EDGE_CLEAR, val) +#define bfin_read_PINT1_INVERT_SET() bfin_read32(PINT1_INVERT_SET) +#define bfin_write_PINT1_INVERT_SET(val) bfin_write32(PINT1_INVERT_SET, val) +#define bfin_read_PINT1_INVERT_CLEAR() bfin_read32(PINT1_INVERT_CLEAR) +#define bfin_write_PINT1_INVERT_CLEAR(val) bfin_write32(PINT1_INVERT_CLEAR, val) +#define bfin_read_PINT1_PINSTATE() bfin_read32(PINT1_PINSTATE) +#define bfin_write_PINT1_PINSTATE(val) bfin_write32(PINT1_PINSTATE, val) +#define bfin_read_PINT1_LATCH() bfin_read32(PINT1_LATCH) +#define bfin_write_PINT1_LATCH(val) bfin_write32(PINT1_LATCH, val) + +/* Port Interrubfin_read_()t 2 Registers (32-bit) */ + +#define bfin_read_PINT2_MASK_SET() bfin_read32(PINT2_MASK_SET) +#define bfin_write_PINT2_MASK_SET(val) bfin_write32(PINT2_MASK_SET, val) +#define bfin_read_PINT2_MASK_CLEAR() bfin_read32(PINT2_MASK_CLEAR) +#define bfin_write_PINT2_MASK_CLEAR(val) bfin_write32(PINT2_MASK_CLEAR, val) +#define bfin_read_PINT2_REQUEST() bfin_read32(PINT2_REQUEST) +#define bfin_write_PINT2_REQUEST(val) bfin_write32(PINT2_REQUEST, val) +#define bfin_read_PINT2_ASSIGN() bfin_read32(PINT2_ASSIGN) +#define bfin_write_PINT2_ASSIGN(val) bfin_write32(PINT2_ASSIGN, val) +#define bfin_read_PINT2_EDGE_SET() bfin_read32(PINT2_EDGE_SET) +#define bfin_write_PINT2_EDGE_SET(val) bfin_write32(PINT2_EDGE_SET, val) +#define bfin_read_PINT2_EDGE_CLEAR() bfin_read32(PINT2_EDGE_CLEAR) +#define bfin_write_PINT2_EDGE_CLEAR(val) bfin_write32(PINT2_EDGE_CLEAR, val) +#define bfin_read_PINT2_INVERT_SET() bfin_read32(PINT2_INVERT_SET) +#define bfin_write_PINT2_INVERT_SET(val) bfin_write32(PINT2_INVERT_SET, val) +#define bfin_read_PINT2_INVERT_CLEAR() bfin_read32(PINT2_INVERT_CLEAR) +#define bfin_write_PINT2_INVERT_CLEAR(val) bfin_write32(PINT2_INVERT_CLEAR, val) +#define bfin_read_PINT2_PINSTATE() bfin_read32(PINT2_PINSTATE) +#define bfin_write_PINT2_PINSTATE(val) bfin_write32(PINT2_PINSTATE, val) +#define bfin_read_PINT2_LATCH() bfin_read32(PINT2_LATCH) +#define bfin_write_PINT2_LATCH(val) bfin_write32(PINT2_LATCH, val) + +/* Port Interrubfin_read_()t 3 Registers (32-bit) */ + +#define bfin_read_PINT3_MASK_SET() bfin_read32(PINT3_MASK_SET) +#define bfin_write_PINT3_MASK_SET(val) bfin_write32(PINT3_MASK_SET, val) +#define bfin_read_PINT3_MASK_CLEAR() bfin_read32(PINT3_MASK_CLEAR) +#define bfin_write_PINT3_MASK_CLEAR(val) bfin_write32(PINT3_MASK_CLEAR, val) +#define bfin_read_PINT3_REQUEST() bfin_read32(PINT3_REQUEST) +#define bfin_write_PINT3_REQUEST(val) bfin_write32(PINT3_REQUEST, val) +#define bfin_read_PINT3_ASSIGN() bfin_read32(PINT3_ASSIGN) +#define bfin_write_PINT3_ASSIGN(val) bfin_write32(PINT3_ASSIGN, val) +#define bfin_read_PINT3_EDGE_SET() bfin_read32(PINT3_EDGE_SET) +#define bfin_write_PINT3_EDGE_SET(val) bfin_write32(PINT3_EDGE_SET, val) +#define bfin_read_PINT3_EDGE_CLEAR() bfin_read32(PINT3_EDGE_CLEAR) +#define bfin_write_PINT3_EDGE_CLEAR(val) bfin_write32(PINT3_EDGE_CLEAR, val) +#define bfin_read_PINT3_INVERT_SET() bfin_read32(PINT3_INVERT_SET) +#define bfin_write_PINT3_INVERT_SET(val) bfin_write32(PINT3_INVERT_SET, val) +#define bfin_read_PINT3_INVERT_CLEAR() bfin_read32(PINT3_INVERT_CLEAR) +#define bfin_write_PINT3_INVERT_CLEAR(val) bfin_write32(PINT3_INVERT_CLEAR, val) +#define bfin_read_PINT3_PINSTATE() bfin_read32(PINT3_PINSTATE) +#define bfin_write_PINT3_PINSTATE(val) bfin_write32(PINT3_PINSTATE, val) +#define bfin_read_PINT3_LATCH() bfin_read32(PINT3_LATCH) +#define bfin_write_PINT3_LATCH(val) bfin_write32(PINT3_LATCH, val) + +/* Port A Registers */ + +#define bfin_read_PORTA_FER() bfin_read16(PORTA_FER) +#define bfin_write_PORTA_FER(val) bfin_write16(PORTA_FER, val) +#define bfin_read_PORTA() bfin_read16(PORTA) +#define bfin_write_PORTA(val) bfin_write16(PORTA, val) +#define bfin_read_PORTA_SET() bfin_read16(PORTA_SET) +#define bfin_write_PORTA_SET(val) bfin_write16(PORTA_SET, val) +#define bfin_read_PORTA_CLEAR() bfin_read16(PORTA_CLEAR) +#define bfin_write_PORTA_CLEAR(val) bfin_write16(PORTA_CLEAR, val) +#define bfin_read_PORTA_DIR_SET() bfin_read16(PORTA_DIR_SET) +#define bfin_write_PORTA_DIR_SET(val) bfin_write16(PORTA_DIR_SET, val) +#define bfin_read_PORTA_DIR_CLEAR() bfin_read16(PORTA_DIR_CLEAR) +#define bfin_write_PORTA_DIR_CLEAR(val) bfin_write16(PORTA_DIR_CLEAR, val) +#define bfin_read_PORTA_INEN() bfin_read16(PORTA_INEN) +#define bfin_write_PORTA_INEN(val) bfin_write16(PORTA_INEN, val) +#define bfin_read_PORTA_MUX() bfin_read32(PORTA_MUX) +#define bfin_write_PORTA_MUX(val) bfin_write32(PORTA_MUX, val) + +/* Port B Registers */ + +#define bfin_read_PORTB_FER() bfin_read16(PORTB_FER) +#define bfin_write_PORTB_FER(val) bfin_write16(PORTB_FER, val) +#define bfin_read_PORTB() bfin_read16(PORTB) +#define bfin_write_PORTB(val) bfin_write16(PORTB, val) +#define bfin_read_PORTB_SET() bfin_read16(PORTB_SET) +#define bfin_write_PORTB_SET(val) bfin_write16(PORTB_SET, val) +#define bfin_read_PORTB_CLEAR() bfin_read16(PORTB_CLEAR) +#define bfin_write_PORTB_CLEAR(val) bfin_write16(PORTB_CLEAR, val) +#define bfin_read_PORTB_DIR_SET() bfin_read16(PORTB_DIR_SET) +#define bfin_write_PORTB_DIR_SET(val) bfin_write16(PORTB_DIR_SET, val) +#define bfin_read_PORTB_DIR_CLEAR() bfin_read16(PORTB_DIR_CLEAR) +#define bfin_write_PORTB_DIR_CLEAR(val) bfin_write16(PORTB_DIR_CLEAR, val) +#define bfin_read_PORTB_INEN() bfin_read16(PORTB_INEN) +#define bfin_write_PORTB_INEN(val) bfin_write16(PORTB_INEN, val) +#define bfin_read_PORTB_MUX() bfin_read32(PORTB_MUX) +#define bfin_write_PORTB_MUX(val) bfin_write32(PORTB_MUX, val) + +/* Port C Registers */ + +#define bfin_read_PORTC_FER() bfin_read16(PORTC_FER) +#define bfin_write_PORTC_FER(val) bfin_write16(PORTC_FER, val) +#define bfin_read_PORTC() bfin_read16(PORTC) +#define bfin_write_PORTC(val) bfin_write16(PORTC, val) +#define bfin_read_PORTC_SET() bfin_read16(PORTC_SET) +#define bfin_write_PORTC_SET(val) bfin_write16(PORTC_SET, val) +#define bfin_read_PORTC_CLEAR() bfin_read16(PORTC_CLEAR) +#define bfin_write_PORTC_CLEAR(val) bfin_write16(PORTC_CLEAR, val) +#define bfin_read_PORTC_DIR_SET() bfin_read16(PORTC_DIR_SET) +#define bfin_write_PORTC_DIR_SET(val) bfin_write16(PORTC_DIR_SET, val) +#define bfin_read_PORTC_DIR_CLEAR() bfin_read16(PORTC_DIR_CLEAR) +#define bfin_write_PORTC_DIR_CLEAR(val) bfin_write16(PORTC_DIR_CLEAR, val) +#define bfin_read_PORTC_INEN() bfin_read16(PORTC_INEN) +#define bfin_write_PORTC_INEN(val) bfin_write16(PORTC_INEN, val) +#define bfin_read_PORTC_MUX() bfin_read32(PORTC_MUX) +#define bfin_write_PORTC_MUX(val) bfin_write32(PORTC_MUX, val) + +/* Port D Registers */ + +#define bfin_read_PORTD_FER() bfin_read16(PORTD_FER) +#define bfin_write_PORTD_FER(val) bfin_write16(PORTD_FER, val) +#define bfin_read_PORTD() bfin_read16(PORTD) +#define bfin_write_PORTD(val) bfin_write16(PORTD, val) +#define bfin_read_PORTD_SET() bfin_read16(PORTD_SET) +#define bfin_write_PORTD_SET(val) bfin_write16(PORTD_SET, val) +#define bfin_read_PORTD_CLEAR() bfin_read16(PORTD_CLEAR) +#define bfin_write_PORTD_CLEAR(val) bfin_write16(PORTD_CLEAR, val) +#define bfin_read_PORTD_DIR_SET() bfin_read16(PORTD_DIR_SET) +#define bfin_write_PORTD_DIR_SET(val) bfin_write16(PORTD_DIR_SET, val) +#define bfin_read_PORTD_DIR_CLEAR() bfin_read16(PORTD_DIR_CLEAR) +#define bfin_write_PORTD_DIR_CLEAR(val) bfin_write16(PORTD_DIR_CLEAR, val) +#define bfin_read_PORTD_INEN() bfin_read16(PORTD_INEN) +#define bfin_write_PORTD_INEN(val) bfin_write16(PORTD_INEN, val) +#define bfin_read_PORTD_MUX() bfin_read32(PORTD_MUX) +#define bfin_write_PORTD_MUX(val) bfin_write32(PORTD_MUX, val) + +/* Port E Registers */ + +#define bfin_read_PORTE_FER() bfin_read16(PORTE_FER) +#define bfin_write_PORTE_FER(val) bfin_write16(PORTE_FER, val) +#define bfin_read_PORTE() bfin_read16(PORTE) +#define bfin_write_PORTE(val) bfin_write16(PORTE, val) +#define bfin_read_PORTE_SET() bfin_read16(PORTE_SET) +#define bfin_write_PORTE_SET(val) bfin_write16(PORTE_SET, val) +#define bfin_read_PORTE_CLEAR() bfin_read16(PORTE_CLEAR) +#define bfin_write_PORTE_CLEAR(val) bfin_write16(PORTE_CLEAR, val) +#define bfin_read_PORTE_DIR_SET() bfin_read16(PORTE_DIR_SET) +#define bfin_write_PORTE_DIR_SET(val) bfin_write16(PORTE_DIR_SET, val) +#define bfin_read_PORTE_DIR_CLEAR() bfin_read16(PORTE_DIR_CLEAR) +#define bfin_write_PORTE_DIR_CLEAR(val) bfin_write16(PORTE_DIR_CLEAR, val) +#define bfin_read_PORTE_INEN() bfin_read16(PORTE_INEN) +#define bfin_write_PORTE_INEN(val) bfin_write16(PORTE_INEN, val) +#define bfin_read_PORTE_MUX() bfin_read32(PORTE_MUX) +#define bfin_write_PORTE_MUX(val) bfin_write32(PORTE_MUX, val) + +/* Port F Registers */ + +#define bfin_read_PORTF_FER() bfin_read16(PORTF_FER) +#define bfin_write_PORTF_FER(val) bfin_write16(PORTF_FER, val) +#define bfin_read_PORTF() bfin_read16(PORTF) +#define bfin_write_PORTF(val) bfin_write16(PORTF, val) +#define bfin_read_PORTF_SET() bfin_read16(PORTF_SET) +#define bfin_write_PORTF_SET(val) bfin_write16(PORTF_SET, val) +#define bfin_read_PORTF_CLEAR() bfin_read16(PORTF_CLEAR) +#define bfin_write_PORTF_CLEAR(val) bfin_write16(PORTF_CLEAR, val) +#define bfin_read_PORTF_DIR_SET() bfin_read16(PORTF_DIR_SET) +#define bfin_write_PORTF_DIR_SET(val) bfin_write16(PORTF_DIR_SET, val) +#define bfin_read_PORTF_DIR_CLEAR() bfin_read16(PORTF_DIR_CLEAR) +#define bfin_write_PORTF_DIR_CLEAR(val) bfin_write16(PORTF_DIR_CLEAR, val) +#define bfin_read_PORTF_INEN() bfin_read16(PORTF_INEN) +#define bfin_write_PORTF_INEN(val) bfin_write16(PORTF_INEN, val) +#define bfin_read_PORTF_MUX() bfin_read32(PORTF_MUX) +#define bfin_write_PORTF_MUX(val) bfin_write32(PORTF_MUX, val) + +/* Port G Registers */ + +#define bfin_read_PORTG_FER() bfin_read16(PORTG_FER) +#define bfin_write_PORTG_FER(val) bfin_write16(PORTG_FER, val) +#define bfin_read_PORTG() bfin_read16(PORTG) +#define bfin_write_PORTG(val) bfin_write16(PORTG, val) +#define bfin_read_PORTG_SET() bfin_read16(PORTG_SET) +#define bfin_write_PORTG_SET(val) bfin_write16(PORTG_SET, val) +#define bfin_read_PORTG_CLEAR() bfin_read16(PORTG_CLEAR) +#define bfin_write_PORTG_CLEAR(val) bfin_write16(PORTG_CLEAR, val) +#define bfin_read_PORTG_DIR_SET() bfin_read16(PORTG_DIR_SET) +#define bfin_write_PORTG_DIR_SET(val) bfin_write16(PORTG_DIR_SET, val) +#define bfin_read_PORTG_DIR_CLEAR() bfin_read16(PORTG_DIR_CLEAR) +#define bfin_write_PORTG_DIR_CLEAR(val) bfin_write16(PORTG_DIR_CLEAR, val) +#define bfin_read_PORTG_INEN() bfin_read16(PORTG_INEN) +#define bfin_write_PORTG_INEN(val) bfin_write16(PORTG_INEN, val) +#define bfin_read_PORTG_MUX() bfin_read32(PORTG_MUX) +#define bfin_write_PORTG_MUX(val) bfin_write32(PORTG_MUX, val) + +/* Port H Registers */ + +#define bfin_read_PORTH_FER() bfin_read16(PORTH_FER) +#define bfin_write_PORTH_FER(val) bfin_write16(PORTH_FER, val) +#define bfin_read_PORTH() bfin_read16(PORTH) +#define bfin_write_PORTH(val) bfin_write16(PORTH, val) +#define bfin_read_PORTH_SET() bfin_read16(PORTH_SET) +#define bfin_write_PORTH_SET(val) bfin_write16(PORTH_SET, val) +#define bfin_read_PORTH_CLEAR() bfin_read16(PORTH_CLEAR) +#define bfin_write_PORTH_CLEAR(val) bfin_write16(PORTH_CLEAR, val) +#define bfin_read_PORTH_DIR_SET() bfin_read16(PORTH_DIR_SET) +#define bfin_write_PORTH_DIR_SET(val) bfin_write16(PORTH_DIR_SET, val) +#define bfin_read_PORTH_DIR_CLEAR() bfin_read16(PORTH_DIR_CLEAR) +#define bfin_write_PORTH_DIR_CLEAR(val) bfin_write16(PORTH_DIR_CLEAR, val) +#define bfin_read_PORTH_INEN() bfin_read16(PORTH_INEN) +#define bfin_write_PORTH_INEN(val) bfin_write16(PORTH_INEN, val) +#define bfin_read_PORTH_MUX() bfin_read32(PORTH_MUX) +#define bfin_write_PORTH_MUX(val) bfin_write32(PORTH_MUX, val) + +/* Port I Registers */ + +#define bfin_read_PORTI_FER() bfin_read16(PORTI_FER) +#define bfin_write_PORTI_FER(val) bfin_write16(PORTI_FER, val) +#define bfin_read_PORTI() bfin_read16(PORTI) +#define bfin_write_PORTI(val) bfin_write16(PORTI, val) +#define bfin_read_PORTI_SET() bfin_read16(PORTI_SET) +#define bfin_write_PORTI_SET(val) bfin_write16(PORTI_SET, val) +#define bfin_read_PORTI_CLEAR() bfin_read16(PORTI_CLEAR) +#define bfin_write_PORTI_CLEAR(val) bfin_write16(PORTI_CLEAR, val) +#define bfin_read_PORTI_DIR_SET() bfin_read16(PORTI_DIR_SET) +#define bfin_write_PORTI_DIR_SET(val) bfin_write16(PORTI_DIR_SET, val) +#define bfin_read_PORTI_DIR_CLEAR() bfin_read16(PORTI_DIR_CLEAR) +#define bfin_write_PORTI_DIR_CLEAR(val) bfin_write16(PORTI_DIR_CLEAR, val) +#define bfin_read_PORTI_INEN() bfin_read16(PORTI_INEN) +#define bfin_write_PORTI_INEN(val) bfin_write16(PORTI_INEN, val) +#define bfin_read_PORTI_MUX() bfin_read32(PORTI_MUX) +#define bfin_write_PORTI_MUX(val) bfin_write32(PORTI_MUX, val) + +/* Port J Registers */ + +#define bfin_read_PORTJ_FER() bfin_read16(PORTJ_FER) +#define bfin_write_PORTJ_FER(val) bfin_write16(PORTJ_FER, val) +#define bfin_read_PORTJ() bfin_read16(PORTJ) +#define bfin_write_PORTJ(val) bfin_write16(PORTJ, val) +#define bfin_read_PORTJ_SET() bfin_read16(PORTJ_SET) +#define bfin_write_PORTJ_SET(val) bfin_write16(PORTJ_SET, val) +#define bfin_read_PORTJ_CLEAR() bfin_read16(PORTJ_CLEAR) +#define bfin_write_PORTJ_CLEAR(val) bfin_write16(PORTJ_CLEAR, val) +#define bfin_read_PORTJ_DIR_SET() bfin_read16(PORTJ_DIR_SET) +#define bfin_write_PORTJ_DIR_SET(val) bfin_write16(PORTJ_DIR_SET, val) +#define bfin_read_PORTJ_DIR_CLEAR() bfin_read16(PORTJ_DIR_CLEAR) +#define bfin_write_PORTJ_DIR_CLEAR(val) bfin_write16(PORTJ_DIR_CLEAR, val) +#define bfin_read_PORTJ_INEN() bfin_read16(PORTJ_INEN) +#define bfin_write_PORTJ_INEN(val) bfin_write16(PORTJ_INEN, val) +#define bfin_read_PORTJ_MUX() bfin_read32(PORTJ_MUX) +#define bfin_write_PORTJ_MUX(val) bfin_write32(PORTJ_MUX, val) + +/* PWM Timer Registers */ + +#define bfin_read_TIMER0_CONFIG() bfin_read16(TIMER0_CONFIG) +#define bfin_write_TIMER0_CONFIG(val) bfin_write16(TIMER0_CONFIG, val) +#define bfin_read_TIMER0_COUNTER() bfin_read32(TIMER0_COUNTER) +#define bfin_write_TIMER0_COUNTER(val) bfin_write32(TIMER0_COUNTER, val) +#define bfin_read_TIMER0_PERIOD() bfin_read32(TIMER0_PERIOD) +#define bfin_write_TIMER0_PERIOD(val) bfin_write32(TIMER0_PERIOD, val) +#define bfin_read_TIMER0_WIDTH() bfin_read32(TIMER0_WIDTH) +#define bfin_write_TIMER0_WIDTH(val) bfin_write32(TIMER0_WIDTH, val) +#define bfin_read_TIMER1_CONFIG() bfin_read16(TIMER1_CONFIG) +#define bfin_write_TIMER1_CONFIG(val) bfin_write16(TIMER1_CONFIG, val) +#define bfin_read_TIMER1_COUNTER() bfin_read32(TIMER1_COUNTER) +#define bfin_write_TIMER1_COUNTER(val) bfin_write32(TIMER1_COUNTER, val) +#define bfin_read_TIMER1_PERIOD() bfin_read32(TIMER1_PERIOD) +#define bfin_write_TIMER1_PERIOD(val) bfin_write32(TIMER1_PERIOD, val) +#define bfin_read_TIMER1_WIDTH() bfin_read32(TIMER1_WIDTH) +#define bfin_write_TIMER1_WIDTH(val) bfin_write32(TIMER1_WIDTH, val) +#define bfin_read_TIMER2_CONFIG() bfin_read16(TIMER2_CONFIG) +#define bfin_write_TIMER2_CONFIG(val) bfin_write16(TIMER2_CONFIG, val) +#define bfin_read_TIMER2_COUNTER() bfin_read32(TIMER2_COUNTER) +#define bfin_write_TIMER2_COUNTER(val) bfin_write32(TIMER2_COUNTER, val) +#define bfin_read_TIMER2_PERIOD() bfin_read32(TIMER2_PERIOD) +#define bfin_write_TIMER2_PERIOD(val) bfin_write32(TIMER2_PERIOD, val) +#define bfin_read_TIMER2_WIDTH() bfin_read32(TIMER2_WIDTH) +#define bfin_write_TIMER2_WIDTH(val) bfin_write32(TIMER2_WIDTH, val) +#define bfin_read_TIMER3_CONFIG() bfin_read16(TIMER3_CONFIG) +#define bfin_write_TIMER3_CONFIG(val) bfin_write16(TIMER3_CONFIG, val) +#define bfin_read_TIMER3_COUNTER() bfin_read32(TIMER3_COUNTER) +#define bfin_write_TIMER3_COUNTER(val) bfin_write32(TIMER3_COUNTER, val) +#define bfin_read_TIMER3_PERIOD() bfin_read32(TIMER3_PERIOD) +#define bfin_write_TIMER3_PERIOD(val) bfin_write32(TIMER3_PERIOD, val) +#define bfin_read_TIMER3_WIDTH() bfin_read32(TIMER3_WIDTH) +#define bfin_write_TIMER3_WIDTH(val) bfin_write32(TIMER3_WIDTH, val) +#define bfin_read_TIMER4_CONFIG() bfin_read16(TIMER4_CONFIG) +#define bfin_write_TIMER4_CONFIG(val) bfin_write16(TIMER4_CONFIG, val) +#define bfin_read_TIMER4_COUNTER() bfin_read32(TIMER4_COUNTER) +#define bfin_write_TIMER4_COUNTER(val) bfin_write32(TIMER4_COUNTER, val) +#define bfin_read_TIMER4_PERIOD() bfin_read32(TIMER4_PERIOD) +#define bfin_write_TIMER4_PERIOD(val) bfin_write32(TIMER4_PERIOD, val) +#define bfin_read_TIMER4_WIDTH() bfin_read32(TIMER4_WIDTH) +#define bfin_write_TIMER4_WIDTH(val) bfin_write32(TIMER4_WIDTH, val) +#define bfin_read_TIMER5_CONFIG() bfin_read16(TIMER5_CONFIG) +#define bfin_write_TIMER5_CONFIG(val) bfin_write16(TIMER5_CONFIG, val) +#define bfin_read_TIMER5_COUNTER() bfin_read32(TIMER5_COUNTER) +#define bfin_write_TIMER5_COUNTER(val) bfin_write32(TIMER5_COUNTER, val) +#define bfin_read_TIMER5_PERIOD() bfin_read32(TIMER5_PERIOD) +#define bfin_write_TIMER5_PERIOD(val) bfin_write32(TIMER5_PERIOD, val) +#define bfin_read_TIMER5_WIDTH() bfin_read32(TIMER5_WIDTH) +#define bfin_write_TIMER5_WIDTH(val) bfin_write32(TIMER5_WIDTH, val) +#define bfin_read_TIMER6_CONFIG() bfin_read16(TIMER6_CONFIG) +#define bfin_write_TIMER6_CONFIG(val) bfin_write16(TIMER6_CONFIG, val) +#define bfin_read_TIMER6_COUNTER() bfin_read32(TIMER6_COUNTER) +#define bfin_write_TIMER6_COUNTER(val) bfin_write32(TIMER6_COUNTER, val) +#define bfin_read_TIMER6_PERIOD() bfin_read32(TIMER6_PERIOD) +#define bfin_write_TIMER6_PERIOD(val) bfin_write32(TIMER6_PERIOD, val) +#define bfin_read_TIMER6_WIDTH() bfin_read32(TIMER6_WIDTH) +#define bfin_write_TIMER6_WIDTH(val) bfin_write32(TIMER6_WIDTH, val) +#define bfin_read_TIMER7_CONFIG() bfin_read16(TIMER7_CONFIG) +#define bfin_write_TIMER7_CONFIG(val) bfin_write16(TIMER7_CONFIG, val) +#define bfin_read_TIMER7_COUNTER() bfin_read32(TIMER7_COUNTER) +#define bfin_write_TIMER7_COUNTER(val) bfin_write32(TIMER7_COUNTER, val) +#define bfin_read_TIMER7_PERIOD() bfin_read32(TIMER7_PERIOD) +#define bfin_write_TIMER7_PERIOD(val) bfin_write32(TIMER7_PERIOD, val) +#define bfin_read_TIMER7_WIDTH() bfin_read32(TIMER7_WIDTH) +#define bfin_write_TIMER7_WIDTH(val) bfin_write32(TIMER7_WIDTH, val) + +/* Timer Groubfin_read_() of 8 */ + +#define bfin_read_TIMER_ENABLE0() bfin_read16(TIMER_ENABLE0) +#define bfin_write_TIMER_ENABLE0(val) bfin_write16(TIMER_ENABLE0, val) +#define bfin_read_TIMER_DISABLE0() bfin_read16(TIMER_DISABLE0) +#define bfin_write_TIMER_DISABLE0(val) bfin_write16(TIMER_DISABLE0, val) +#define bfin_read_TIMER_STATUS0() bfin_read32(TIMER_STATUS0) +#define bfin_write_TIMER_STATUS0(val) bfin_write32(TIMER_STATUS0, val) + +/* DMAC1 Registers */ + +#define bfin_read_DMAC1_TCPER() bfin_read16(DMAC1_TCPER) +#define bfin_write_DMAC1_TCPER(val) bfin_write16(DMAC1_TCPER, val) +#define bfin_read_DMAC1_TCCNT() bfin_read16(DMAC1_TCCNT) +#define bfin_write_DMAC1_TCCNT(val) bfin_write16(DMAC1_TCCNT, val) + +/* DMA Channel 12 Registers */ + +#define bfin_read_DMA12_NEXT_DESC_PTR() bfin_read32(DMA12_NEXT_DESC_PTR) +#define bfin_write_DMA12_NEXT_DESC_PTR(val) bfin_write32(DMA12_NEXT_DESC_PTR) +#define bfin_read_DMA12_START_ADDR() bfin_read32(DMA12_START_ADDR) +#define bfin_write_DMA12_START_ADDR(val) bfin_write32(DMA12_START_ADDR) +#define bfin_read_DMA12_CONFIG() bfin_read16(DMA12_CONFIG) +#define bfin_write_DMA12_CONFIG(val) bfin_write16(DMA12_CONFIG, val) +#define bfin_read_DMA12_X_COUNT() bfin_read16(DMA12_X_COUNT) +#define bfin_write_DMA12_X_COUNT(val) bfin_write16(DMA12_X_COUNT, val) +#define bfin_read_DMA12_X_MODIFY() bfin_read16(DMA12_X_MODIFY) +#define bfin_write_DMA12_X_MODIFY(val) bfin_write16(DMA12_X_MODIFY) +#define bfin_read_DMA12_Y_COUNT() bfin_read16(DMA12_Y_COUNT) +#define bfin_write_DMA12_Y_COUNT(val) bfin_write16(DMA12_Y_COUNT, val) +#define bfin_read_DMA12_Y_MODIFY() bfin_read16(DMA12_Y_MODIFY) +#define bfin_write_DMA12_Y_MODIFY(val) bfin_write16(DMA12_Y_MODIFY) +#define bfin_read_DMA12_CURR_DESC_PTR() bfin_read32(DMA12_CURR_DESC_PTR) +#define bfin_write_DMA12_CURR_DESC_PTR(val) bfin_write32(DMA12_CURR_DESC_PTR) +#define bfin_read_DMA12_CURR_ADDR() bfin_read32(DMA12_CURR_ADDR) +#define bfin_write_DMA12_CURR_ADDR(val) bfin_write32(DMA12_CURR_ADDR) +#define bfin_read_DMA12_IRQ_STATUS() bfin_read16(DMA12_IRQ_STATUS) +#define bfin_write_DMA12_IRQ_STATUS(val) bfin_write16(DMA12_IRQ_STATUS, val) +#define bfin_read_DMA12_PERIPHERAL_MAP() bfin_read16(DMA12_PERIPHERAL_MAP) +#define bfin_write_DMA12_PERIPHERAL_MAP(val) bfin_write16(DMA12_PERIPHERAL_MAP, val) +#define bfin_read_DMA12_CURR_X_COUNT() bfin_read16(DMA12_CURR_X_COUNT) +#define bfin_write_DMA12_CURR_X_COUNT(val) bfin_write16(DMA12_CURR_X_COUNT, val) +#define bfin_read_DMA12_CURR_Y_COUNT() bfin_read16(DMA12_CURR_Y_COUNT) +#define bfin_write_DMA12_CURR_Y_COUNT(val) bfin_write16(DMA12_CURR_Y_COUNT, val) + +/* DMA Channel 13 Registers */ + +#define bfin_read_DMA13_NEXT_DESC_PTR() bfin_read32(DMA13_NEXT_DESC_PTR) +#define bfin_write_DMA13_NEXT_DESC_PTR(val) bfin_write32(DMA13_NEXT_DESC_PTR) +#define bfin_read_DMA13_START_ADDR() bfin_read32(DMA13_START_ADDR) +#define bfin_write_DMA13_START_ADDR(val) bfin_write32(DMA13_START_ADDR) +#define bfin_read_DMA13_CONFIG() bfin_read16(DMA13_CONFIG) +#define bfin_write_DMA13_CONFIG(val) bfin_write16(DMA13_CONFIG, val) +#define bfin_read_DMA13_X_COUNT() bfin_read16(DMA13_X_COUNT) +#define bfin_write_DMA13_X_COUNT(val) bfin_write16(DMA13_X_COUNT, val) +#define bfin_read_DMA13_X_MODIFY() bfin_read16(DMA13_X_MODIFY) +#define bfin_write_DMA13_X_MODIFY(val) bfin_write16(DMA13_X_MODIFY) +#define bfin_read_DMA13_Y_COUNT() bfin_read16(DMA13_Y_COUNT) +#define bfin_write_DMA13_Y_COUNT(val) bfin_write16(DMA13_Y_COUNT, val) +#define bfin_read_DMA13_Y_MODIFY() bfin_read16(DMA13_Y_MODIFY) +#define bfin_write_DMA13_Y_MODIFY(val) bfin_write16(DMA13_Y_MODIFY) +#define bfin_read_DMA13_CURR_DESC_PTR() bfin_read32(DMA13_CURR_DESC_PTR) +#define bfin_write_DMA13_CURR_DESC_PTR(val) bfin_write32(DMA13_CURR_DESC_PTR) +#define bfin_read_DMA13_CURR_ADDR() bfin_read32(DMA13_CURR_ADDR) +#define bfin_write_DMA13_CURR_ADDR(val) bfin_write32(DMA13_CURR_ADDR) +#define bfin_read_DMA13_IRQ_STATUS() bfin_read16(DMA13_IRQ_STATUS) +#define bfin_write_DMA13_IRQ_STATUS(val) bfin_write16(DMA13_IRQ_STATUS, val) +#define bfin_read_DMA13_PERIPHERAL_MAP() bfin_read16(DMA13_PERIPHERAL_MAP) +#define bfin_write_DMA13_PERIPHERAL_MAP(val) bfin_write16(DMA13_PERIPHERAL_MAP, val) +#define bfin_read_DMA13_CURR_X_COUNT() bfin_read16(DMA13_CURR_X_COUNT) +#define bfin_write_DMA13_CURR_X_COUNT(val) bfin_write16(DMA13_CURR_X_COUNT, val) +#define bfin_read_DMA13_CURR_Y_COUNT() bfin_read16(DMA13_CURR_Y_COUNT) +#define bfin_write_DMA13_CURR_Y_COUNT(val) bfin_write16(DMA13_CURR_Y_COUNT, val) + +/* DMA Channel 14 Registers */ + +#define bfin_read_DMA14_NEXT_DESC_PTR() bfin_read32(DMA14_NEXT_DESC_PTR) +#define bfin_write_DMA14_NEXT_DESC_PTR(val) bfin_write32(DMA14_NEXT_DESC_PTR) +#define bfin_read_DMA14_START_ADDR() bfin_read32(DMA14_START_ADDR) +#define bfin_write_DMA14_START_ADDR(val) bfin_write32(DMA14_START_ADDR) +#define bfin_read_DMA14_CONFIG() bfin_read16(DMA14_CONFIG) +#define bfin_write_DMA14_CONFIG(val) bfin_write16(DMA14_CONFIG, val) +#define bfin_read_DMA14_X_COUNT() bfin_read16(DMA14_X_COUNT) +#define bfin_write_DMA14_X_COUNT(val) bfin_write16(DMA14_X_COUNT, val) +#define bfin_read_DMA14_X_MODIFY() bfin_read16(DMA14_X_MODIFY) +#define bfin_write_DMA14_X_MODIFY(val) bfin_write16(DMA14_X_MODIFY) +#define bfin_read_DMA14_Y_COUNT() bfin_read16(DMA14_Y_COUNT) +#define bfin_write_DMA14_Y_COUNT(val) bfin_write16(DMA14_Y_COUNT, val) +#define bfin_read_DMA14_Y_MODIFY() bfin_read16(DMA14_Y_MODIFY) +#define bfin_write_DMA14_Y_MODIFY(val) bfin_write16(DMA14_Y_MODIFY) +#define bfin_read_DMA14_CURR_DESC_PTR() bfin_read32(DMA14_CURR_DESC_PTR) +#define bfin_write_DMA14_CURR_DESC_PTR(val) bfin_write32(DMA14_CURR_DESC_PTR) +#define bfin_read_DMA14_CURR_ADDR() bfin_read32(DMA14_CURR_ADDR) +#define bfin_write_DMA14_CURR_ADDR(val) bfin_write32(DMA14_CURR_ADDR) +#define bfin_read_DMA14_IRQ_STATUS() bfin_read16(DMA14_IRQ_STATUS) +#define bfin_write_DMA14_IRQ_STATUS(val) bfin_write16(DMA14_IRQ_STATUS, val) +#define bfin_read_DMA14_PERIPHERAL_MAP() bfin_read16(DMA14_PERIPHERAL_MAP) +#define bfin_write_DMA14_PERIPHERAL_MAP(val) bfin_write16(DMA14_PERIPHERAL_MAP, val) +#define bfin_read_DMA14_CURR_X_COUNT() bfin_read16(DMA14_CURR_X_COUNT) +#define bfin_write_DMA14_CURR_X_COUNT(val) bfin_write16(DMA14_CURR_X_COUNT, val) +#define bfin_read_DMA14_CURR_Y_COUNT() bfin_read16(DMA14_CURR_Y_COUNT) +#define bfin_write_DMA14_CURR_Y_COUNT(val) bfin_write16(DMA14_CURR_Y_COUNT, val) + +/* DMA Channel 15 Registers */ + +#define bfin_read_DMA15_NEXT_DESC_PTR() bfin_read32(DMA15_NEXT_DESC_PTR) +#define bfin_write_DMA15_NEXT_DESC_PTR(val) bfin_write32(DMA15_NEXT_DESC_PTR) +#define bfin_read_DMA15_START_ADDR() bfin_read32(DMA15_START_ADDR) +#define bfin_write_DMA15_START_ADDR(val) bfin_write32(DMA15_START_ADDR) +#define bfin_read_DMA15_CONFIG() bfin_read16(DMA15_CONFIG) +#define bfin_write_DMA15_CONFIG(val) bfin_write16(DMA15_CONFIG, val) +#define bfin_read_DMA15_X_COUNT() bfin_read16(DMA15_X_COUNT) +#define bfin_write_DMA15_X_COUNT(val) bfin_write16(DMA15_X_COUNT, val) +#define bfin_read_DMA15_X_MODIFY() bfin_read16(DMA15_X_MODIFY) +#define bfin_write_DMA15_X_MODIFY(val) bfin_write16(DMA15_X_MODIFY) +#define bfin_read_DMA15_Y_COUNT() bfin_read16(DMA15_Y_COUNT) +#define bfin_write_DMA15_Y_COUNT(val) bfin_write16(DMA15_Y_COUNT, val) +#define bfin_read_DMA15_Y_MODIFY() bfin_read16(DMA15_Y_MODIFY) +#define bfin_write_DMA15_Y_MODIFY(val) bfin_write16(DMA15_Y_MODIFY) +#define bfin_read_DMA15_CURR_DESC_PTR() bfin_read32(DMA15_CURR_DESC_PTR) +#define bfin_write_DMA15_CURR_DESC_PTR(val) bfin_write32(DMA15_CURR_DESC_PTR) +#define bfin_read_DMA15_CURR_ADDR() bfin_read32(DMA15_CURR_ADDR) +#define bfin_write_DMA15_CURR_ADDR(val) bfin_write32(DMA15_CURR_ADDR) +#define bfin_read_DMA15_IRQ_STATUS() bfin_read16(DMA15_IRQ_STATUS) +#define bfin_write_DMA15_IRQ_STATUS(val) bfin_write16(DMA15_IRQ_STATUS, val) +#define bfin_read_DMA15_PERIPHERAL_MAP() bfin_read16(DMA15_PERIPHERAL_MAP) +#define bfin_write_DMA15_PERIPHERAL_MAP(val) bfin_write16(DMA15_PERIPHERAL_MAP, val) +#define bfin_read_DMA15_CURR_X_COUNT() bfin_read16(DMA15_CURR_X_COUNT) +#define bfin_write_DMA15_CURR_X_COUNT(val) bfin_write16(DMA15_CURR_X_COUNT, val) +#define bfin_read_DMA15_CURR_Y_COUNT() bfin_read16(DMA15_CURR_Y_COUNT) +#define bfin_write_DMA15_CURR_Y_COUNT(val) bfin_write16(DMA15_CURR_Y_COUNT, val) + +/* DMA Channel 16 Registers */ + +#define bfin_read_DMA16_NEXT_DESC_PTR() bfin_read32(DMA16_NEXT_DESC_PTR) +#define bfin_write_DMA16_NEXT_DESC_PTR(val) bfin_write32(DMA16_NEXT_DESC_PTR) +#define bfin_read_DMA16_START_ADDR() bfin_read32(DMA16_START_ADDR) +#define bfin_write_DMA16_START_ADDR(val) bfin_write32(DMA16_START_ADDR) +#define bfin_read_DMA16_CONFIG() bfin_read16(DMA16_CONFIG) +#define bfin_write_DMA16_CONFIG(val) bfin_write16(DMA16_CONFIG, val) +#define bfin_read_DMA16_X_COUNT() bfin_read16(DMA16_X_COUNT) +#define bfin_write_DMA16_X_COUNT(val) bfin_write16(DMA16_X_COUNT, val) +#define bfin_read_DMA16_X_MODIFY() bfin_read16(DMA16_X_MODIFY) +#define bfin_write_DMA16_X_MODIFY(val) bfin_write16(DMA16_X_MODIFY) +#define bfin_read_DMA16_Y_COUNT() bfin_read16(DMA16_Y_COUNT) +#define bfin_write_DMA16_Y_COUNT(val) bfin_write16(DMA16_Y_COUNT, val) +#define bfin_read_DMA16_Y_MODIFY() bfin_read16(DMA16_Y_MODIFY) +#define bfin_write_DMA16_Y_MODIFY(val) bfin_write16(DMA16_Y_MODIFY) +#define bfin_read_DMA16_CURR_DESC_PTR() bfin_read32(DMA16_CURR_DESC_PTR) +#define bfin_write_DMA16_CURR_DESC_PTR(val) bfin_write32(DMA16_CURR_DESC_PTR) +#define bfin_read_DMA16_CURR_ADDR() bfin_read32(DMA16_CURR_ADDR) +#define bfin_write_DMA16_CURR_ADDR(val) bfin_write32(DMA16_CURR_ADDR) +#define bfin_read_DMA16_IRQ_STATUS() bfin_read16(DMA16_IRQ_STATUS) +#define bfin_write_DMA16_IRQ_STATUS(val) bfin_write16(DMA16_IRQ_STATUS, val) +#define bfin_read_DMA16_PERIPHERAL_MAP() bfin_read16(DMA16_PERIPHERAL_MAP) +#define bfin_write_DMA16_PERIPHERAL_MAP(val) bfin_write16(DMA16_PERIPHERAL_MAP, val) +#define bfin_read_DMA16_CURR_X_COUNT() bfin_read16(DMA16_CURR_X_COUNT) +#define bfin_write_DMA16_CURR_X_COUNT(val) bfin_write16(DMA16_CURR_X_COUNT, val) +#define bfin_read_DMA16_CURR_Y_COUNT() bfin_read16(DMA16_CURR_Y_COUNT) +#define bfin_write_DMA16_CURR_Y_COUNT(val) bfin_write16(DMA16_CURR_Y_COUNT, val) + +/* DMA Channel 17 Registers */ + +#define bfin_read_DMA17_NEXT_DESC_PTR() bfin_read32(DMA17_NEXT_DESC_PTR) +#define bfin_write_DMA17_NEXT_DESC_PTR(val) bfin_write32(DMA17_NEXT_DESC_PTR) +#define bfin_read_DMA17_START_ADDR() bfin_read32(DMA17_START_ADDR) +#define bfin_write_DMA17_START_ADDR(val) bfin_write32(DMA17_START_ADDR) +#define bfin_read_DMA17_CONFIG() bfin_read16(DMA17_CONFIG) +#define bfin_write_DMA17_CONFIG(val) bfin_write16(DMA17_CONFIG, val) +#define bfin_read_DMA17_X_COUNT() bfin_read16(DMA17_X_COUNT) +#define bfin_write_DMA17_X_COUNT(val) bfin_write16(DMA17_X_COUNT, val) +#define bfin_read_DMA17_X_MODIFY() bfin_read16(DMA17_X_MODIFY) +#define bfin_write_DMA17_X_MODIFY(val) bfin_write16(DMA17_X_MODIFY) +#define bfin_read_DMA17_Y_COUNT() bfin_read16(DMA17_Y_COUNT) +#define bfin_write_DMA17_Y_COUNT(val) bfin_write16(DMA17_Y_COUNT, val) +#define bfin_read_DMA17_Y_MODIFY() bfin_read16(DMA17_Y_MODIFY) +#define bfin_write_DMA17_Y_MODIFY(val) bfin_write16(DMA17_Y_MODIFY) +#define bfin_read_DMA17_CURR_DESC_PTR() bfin_read32(DMA17_CURR_DESC_PTR) +#define bfin_write_DMA17_CURR_DESC_PTR(val) bfin_write32(DMA17_CURR_DESC_PTR) +#define bfin_read_DMA17_CURR_ADDR() bfin_read32(DMA17_CURR_ADDR) +#define bfin_write_DMA17_CURR_ADDR(val) bfin_write32(DMA17_CURR_ADDR) +#define bfin_read_DMA17_IRQ_STATUS() bfin_read16(DMA17_IRQ_STATUS) +#define bfin_write_DMA17_IRQ_STATUS(val) bfin_write16(DMA17_IRQ_STATUS, val) +#define bfin_read_DMA17_PERIPHERAL_MAP() bfin_read16(DMA17_PERIPHERAL_MAP) +#define bfin_write_DMA17_PERIPHERAL_MAP(val) bfin_write16(DMA17_PERIPHERAL_MAP, val) +#define bfin_read_DMA17_CURR_X_COUNT() bfin_read16(DMA17_CURR_X_COUNT) +#define bfin_write_DMA17_CURR_X_COUNT(val) bfin_write16(DMA17_CURR_X_COUNT, val) +#define bfin_read_DMA17_CURR_Y_COUNT() bfin_read16(DMA17_CURR_Y_COUNT) +#define bfin_write_DMA17_CURR_Y_COUNT(val) bfin_write16(DMA17_CURR_Y_COUNT, val) + +/* DMA Channel 18 Registers */ + +#define bfin_read_DMA18_NEXT_DESC_PTR() bfin_read32(DMA18_NEXT_DESC_PTR) +#define bfin_write_DMA18_NEXT_DESC_PTR(val) bfin_write32(DMA18_NEXT_DESC_PTR) +#define bfin_read_DMA18_START_ADDR() bfin_read32(DMA18_START_ADDR) +#define bfin_write_DMA18_START_ADDR(val) bfin_write32(DMA18_START_ADDR) +#define bfin_read_DMA18_CONFIG() bfin_read16(DMA18_CONFIG) +#define bfin_write_DMA18_CONFIG(val) bfin_write16(DMA18_CONFIG, val) +#define bfin_read_DMA18_X_COUNT() bfin_read16(DMA18_X_COUNT) +#define bfin_write_DMA18_X_COUNT(val) bfin_write16(DMA18_X_COUNT, val) +#define bfin_read_DMA18_X_MODIFY() bfin_read16(DMA18_X_MODIFY) +#define bfin_write_DMA18_X_MODIFY(val) bfin_write16(DMA18_X_MODIFY) +#define bfin_read_DMA18_Y_COUNT() bfin_read16(DMA18_Y_COUNT) +#define bfin_write_DMA18_Y_COUNT(val) bfin_write16(DMA18_Y_COUNT, val) +#define bfin_read_DMA18_Y_MODIFY() bfin_read16(DMA18_Y_MODIFY) +#define bfin_write_DMA18_Y_MODIFY(val) bfin_write16(DMA18_Y_MODIFY) +#define bfin_read_DMA18_CURR_DESC_PTR() bfin_read32(DMA18_CURR_DESC_PTR) +#define bfin_write_DMA18_CURR_DESC_PTR(val) bfin_write32(DMA18_CURR_DESC_PTR) +#define bfin_read_DMA18_CURR_ADDR() bfin_read32(DMA18_CURR_ADDR) +#define bfin_write_DMA18_CURR_ADDR(val) bfin_write32(DMA18_CURR_ADDR) +#define bfin_read_DMA18_IRQ_STATUS() bfin_read16(DMA18_IRQ_STATUS) +#define bfin_write_DMA18_IRQ_STATUS(val) bfin_write16(DMA18_IRQ_STATUS, val) +#define bfin_read_DMA18_PERIPHERAL_MAP() bfin_read16(DMA18_PERIPHERAL_MAP) +#define bfin_write_DMA18_PERIPHERAL_MAP(val) bfin_write16(DMA18_PERIPHERAL_MAP, val) +#define bfin_read_DMA18_CURR_X_COUNT() bfin_read16(DMA18_CURR_X_COUNT) +#define bfin_write_DMA18_CURR_X_COUNT(val) bfin_write16(DMA18_CURR_X_COUNT, val) +#define bfin_read_DMA18_CURR_Y_COUNT() bfin_read16(DMA18_CURR_Y_COUNT) +#define bfin_write_DMA18_CURR_Y_COUNT(val) bfin_write16(DMA18_CURR_Y_COUNT, val) + +/* DMA Channel 19 Registers */ + +#define bfin_read_DMA19_NEXT_DESC_PTR() bfin_read32(DMA19_NEXT_DESC_PTR) +#define bfin_write_DMA19_NEXT_DESC_PTR(val) bfin_write32(DMA19_NEXT_DESC_PTR) +#define bfin_read_DMA19_START_ADDR() bfin_read32(DMA19_START_ADDR) +#define bfin_write_DMA19_START_ADDR(val) bfin_write32(DMA19_START_ADDR) +#define bfin_read_DMA19_CONFIG() bfin_read16(DMA19_CONFIG) +#define bfin_write_DMA19_CONFIG(val) bfin_write16(DMA19_CONFIG, val) +#define bfin_read_DMA19_X_COUNT() bfin_read16(DMA19_X_COUNT) +#define bfin_write_DMA19_X_COUNT(val) bfin_write16(DMA19_X_COUNT, val) +#define bfin_read_DMA19_X_MODIFY() bfin_read16(DMA19_X_MODIFY) +#define bfin_write_DMA19_X_MODIFY(val) bfin_write16(DMA19_X_MODIFY) +#define bfin_read_DMA19_Y_COUNT() bfin_read16(DMA19_Y_COUNT) +#define bfin_write_DMA19_Y_COUNT(val) bfin_write16(DMA19_Y_COUNT, val) +#define bfin_read_DMA19_Y_MODIFY() bfin_read16(DMA19_Y_MODIFY) +#define bfin_write_DMA19_Y_MODIFY(val) bfin_write16(DMA19_Y_MODIFY) +#define bfin_read_DMA19_CURR_DESC_PTR() bfin_read32(DMA19_CURR_DESC_PTR) +#define bfin_write_DMA19_CURR_DESC_PTR(val) bfin_write32(DMA19_CURR_DESC_PTR) +#define bfin_read_DMA19_CURR_ADDR() bfin_read32(DMA19_CURR_ADDR) +#define bfin_write_DMA19_CURR_ADDR(val) bfin_write32(DMA19_CURR_ADDR) +#define bfin_read_DMA19_IRQ_STATUS() bfin_read16(DMA19_IRQ_STATUS) +#define bfin_write_DMA19_IRQ_STATUS(val) bfin_write16(DMA19_IRQ_STATUS, val) +#define bfin_read_DMA19_PERIPHERAL_MAP() bfin_read16(DMA19_PERIPHERAL_MAP) +#define bfin_write_DMA19_PERIPHERAL_MAP(val) bfin_write16(DMA19_PERIPHERAL_MAP, val) +#define bfin_read_DMA19_CURR_X_COUNT() bfin_read16(DMA19_CURR_X_COUNT) +#define bfin_write_DMA19_CURR_X_COUNT(val) bfin_write16(DMA19_CURR_X_COUNT, val) +#define bfin_read_DMA19_CURR_Y_COUNT() bfin_read16(DMA19_CURR_Y_COUNT) +#define bfin_write_DMA19_CURR_Y_COUNT(val) bfin_write16(DMA19_CURR_Y_COUNT, val) + +/* DMA Channel 20 Registers */ + +#define bfin_read_DMA20_NEXT_DESC_PTR() bfin_read32(DMA20_NEXT_DESC_PTR) +#define bfin_write_DMA20_NEXT_DESC_PTR(val) bfin_write32(DMA20_NEXT_DESC_PTR) +#define bfin_read_DMA20_START_ADDR() bfin_read32(DMA20_START_ADDR) +#define bfin_write_DMA20_START_ADDR(val) bfin_write32(DMA20_START_ADDR) +#define bfin_read_DMA20_CONFIG() bfin_read16(DMA20_CONFIG) +#define bfin_write_DMA20_CONFIG(val) bfin_write16(DMA20_CONFIG, val) +#define bfin_read_DMA20_X_COUNT() bfin_read16(DMA20_X_COUNT) +#define bfin_write_DMA20_X_COUNT(val) bfin_write16(DMA20_X_COUNT, val) +#define bfin_read_DMA20_X_MODIFY() bfin_read16(DMA20_X_MODIFY) +#define bfin_write_DMA20_X_MODIFY(val) bfin_write16(DMA20_X_MODIFY) +#define bfin_read_DMA20_Y_COUNT() bfin_read16(DMA20_Y_COUNT) +#define bfin_write_DMA20_Y_COUNT(val) bfin_write16(DMA20_Y_COUNT, val) +#define bfin_read_DMA20_Y_MODIFY() bfin_read16(DMA20_Y_MODIFY) +#define bfin_write_DMA20_Y_MODIFY(val) bfin_write16(DMA20_Y_MODIFY) +#define bfin_read_DMA20_CURR_DESC_PTR() bfin_read32(DMA20_CURR_DESC_PTR) +#define bfin_write_DMA20_CURR_DESC_PTR(val) bfin_write32(DMA20_CURR_DESC_PTR) +#define bfin_read_DMA20_CURR_ADDR() bfin_read32(DMA20_CURR_ADDR) +#define bfin_write_DMA20_CURR_ADDR(val) bfin_write32(DMA20_CURR_ADDR) +#define bfin_read_DMA20_IRQ_STATUS() bfin_read16(DMA20_IRQ_STATUS) +#define bfin_write_DMA20_IRQ_STATUS(val) bfin_write16(DMA20_IRQ_STATUS, val) +#define bfin_read_DMA20_PERIPHERAL_MAP() bfin_read16(DMA20_PERIPHERAL_MAP) +#define bfin_write_DMA20_PERIPHERAL_MAP(val) bfin_write16(DMA20_PERIPHERAL_MAP, val) +#define bfin_read_DMA20_CURR_X_COUNT() bfin_read16(DMA20_CURR_X_COUNT) +#define bfin_write_DMA20_CURR_X_COUNT(val) bfin_write16(DMA20_CURR_X_COUNT, val) +#define bfin_read_DMA20_CURR_Y_COUNT() bfin_read16(DMA20_CURR_Y_COUNT) +#define bfin_write_DMA20_CURR_Y_COUNT(val) bfin_write16(DMA20_CURR_Y_COUNT, val) + +/* DMA Channel 21 Registers */ + +#define bfin_read_DMA21_NEXT_DESC_PTR() bfin_read32(DMA21_NEXT_DESC_PTR) +#define bfin_write_DMA21_NEXT_DESC_PTR(val) bfin_write32(DMA21_NEXT_DESC_PTR) +#define bfin_read_DMA21_START_ADDR() bfin_read32(DMA21_START_ADDR) +#define bfin_write_DMA21_START_ADDR(val) bfin_write32(DMA21_START_ADDR) +#define bfin_read_DMA21_CONFIG() bfin_read16(DMA21_CONFIG) +#define bfin_write_DMA21_CONFIG(val) bfin_write16(DMA21_CONFIG, val) +#define bfin_read_DMA21_X_COUNT() bfin_read16(DMA21_X_COUNT) +#define bfin_write_DMA21_X_COUNT(val) bfin_write16(DMA21_X_COUNT, val) +#define bfin_read_DMA21_X_MODIFY() bfin_read16(DMA21_X_MODIFY) +#define bfin_write_DMA21_X_MODIFY(val) bfin_write16(DMA21_X_MODIFY) +#define bfin_read_DMA21_Y_COUNT() bfin_read16(DMA21_Y_COUNT) +#define bfin_write_DMA21_Y_COUNT(val) bfin_write16(DMA21_Y_COUNT, val) +#define bfin_read_DMA21_Y_MODIFY() bfin_read16(DMA21_Y_MODIFY) +#define bfin_write_DMA21_Y_MODIFY(val) bfin_write16(DMA21_Y_MODIFY) +#define bfin_read_DMA21_CURR_DESC_PTR() bfin_read32(DMA21_CURR_DESC_PTR) +#define bfin_write_DMA21_CURR_DESC_PTR(val) bfin_write32(DMA21_CURR_DESC_PTR) +#define bfin_read_DMA21_CURR_ADDR() bfin_read32(DMA21_CURR_ADDR) +#define bfin_write_DMA21_CURR_ADDR(val) bfin_write32(DMA21_CURR_ADDR) +#define bfin_read_DMA21_IRQ_STATUS() bfin_read16(DMA21_IRQ_STATUS) +#define bfin_write_DMA21_IRQ_STATUS(val) bfin_write16(DMA21_IRQ_STATUS, val) +#define bfin_read_DMA21_PERIPHERAL_MAP() bfin_read16(DMA21_PERIPHERAL_MAP) +#define bfin_write_DMA21_PERIPHERAL_MAP(val) bfin_write16(DMA21_PERIPHERAL_MAP, val) +#define bfin_read_DMA21_CURR_X_COUNT() bfin_read16(DMA21_CURR_X_COUNT) +#define bfin_write_DMA21_CURR_X_COUNT(val) bfin_write16(DMA21_CURR_X_COUNT, val) +#define bfin_read_DMA21_CURR_Y_COUNT() bfin_read16(DMA21_CURR_Y_COUNT) +#define bfin_write_DMA21_CURR_Y_COUNT(val) bfin_write16(DMA21_CURR_Y_COUNT, val) + +/* DMA Channel 22 Registers */ + +#define bfin_read_DMA22_NEXT_DESC_PTR() bfin_read32(DMA22_NEXT_DESC_PTR) +#define bfin_write_DMA22_NEXT_DESC_PTR(val) bfin_write32(DMA22_NEXT_DESC_PTR) +#define bfin_read_DMA22_START_ADDR() bfin_read32(DMA22_START_ADDR) +#define bfin_write_DMA22_START_ADDR(val) bfin_write32(DMA22_START_ADDR) +#define bfin_read_DMA22_CONFIG() bfin_read16(DMA22_CONFIG) +#define bfin_write_DMA22_CONFIG(val) bfin_write16(DMA22_CONFIG, val) +#define bfin_read_DMA22_X_COUNT() bfin_read16(DMA22_X_COUNT) +#define bfin_write_DMA22_X_COUNT(val) bfin_write16(DMA22_X_COUNT, val) +#define bfin_read_DMA22_X_MODIFY() bfin_read16(DMA22_X_MODIFY) +#define bfin_write_DMA22_X_MODIFY(val) bfin_write16(DMA22_X_MODIFY) +#define bfin_read_DMA22_Y_COUNT() bfin_read16(DMA22_Y_COUNT) +#define bfin_write_DMA22_Y_COUNT(val) bfin_write16(DMA22_Y_COUNT, val) +#define bfin_read_DMA22_Y_MODIFY() bfin_read16(DMA22_Y_MODIFY) +#define bfin_write_DMA22_Y_MODIFY(val) bfin_write16(DMA22_Y_MODIFY) +#define bfin_read_DMA22_CURR_DESC_PTR() bfin_read32(DMA22_CURR_DESC_PTR) +#define bfin_write_DMA22_CURR_DESC_PTR(val) bfin_write32(DMA22_CURR_DESC_PTR) +#define bfin_read_DMA22_CURR_ADDR() bfin_read32(DMA22_CURR_ADDR) +#define bfin_write_DMA22_CURR_ADDR(val) bfin_write32(DMA22_CURR_ADDR) +#define bfin_read_DMA22_IRQ_STATUS() bfin_read16(DMA22_IRQ_STATUS) +#define bfin_write_DMA22_IRQ_STATUS(val) bfin_write16(DMA22_IRQ_STATUS, val) +#define bfin_read_DMA22_PERIPHERAL_MAP() bfin_read16(DMA22_PERIPHERAL_MAP) +#define bfin_write_DMA22_PERIPHERAL_MAP(val) bfin_write16(DMA22_PERIPHERAL_MAP, val) +#define bfin_read_DMA22_CURR_X_COUNT() bfin_read16(DMA22_CURR_X_COUNT) +#define bfin_write_DMA22_CURR_X_COUNT(val) bfin_write16(DMA22_CURR_X_COUNT, val) +#define bfin_read_DMA22_CURR_Y_COUNT() bfin_read16(DMA22_CURR_Y_COUNT) +#define bfin_write_DMA22_CURR_Y_COUNT(val) bfin_write16(DMA22_CURR_Y_COUNT, val) + +/* DMA Channel 23 Registers */ + +#define bfin_read_DMA23_NEXT_DESC_PTR() bfin_read32(DMA23_NEXT_DESC_PTR) +#define bfin_write_DMA23_NEXT_DESC_PTR(val) bfin_write32(DMA23_NEXT_DESC_PTR) +#define bfin_read_DMA23_START_ADDR() bfin_read32(DMA23_START_ADDR) +#define bfin_write_DMA23_START_ADDR(val) bfin_write32(DMA23_START_ADDR) +#define bfin_read_DMA23_CONFIG() bfin_read16(DMA23_CONFIG) +#define bfin_write_DMA23_CONFIG(val) bfin_write16(DMA23_CONFIG, val) +#define bfin_read_DMA23_X_COUNT() bfin_read16(DMA23_X_COUNT) +#define bfin_write_DMA23_X_COUNT(val) bfin_write16(DMA23_X_COUNT, val) +#define bfin_read_DMA23_X_MODIFY() bfin_read16(DMA23_X_MODIFY) +#define bfin_write_DMA23_X_MODIFY(val) bfin_write16(DMA23_X_MODIFY) +#define bfin_read_DMA23_Y_COUNT() bfin_read16(DMA23_Y_COUNT) +#define bfin_write_DMA23_Y_COUNT(val) bfin_write16(DMA23_Y_COUNT, val) +#define bfin_read_DMA23_Y_MODIFY() bfin_read16(DMA23_Y_MODIFY) +#define bfin_write_DMA23_Y_MODIFY(val) bfin_write16(DMA23_Y_MODIFY) +#define bfin_read_DMA23_CURR_DESC_PTR() bfin_read32(DMA23_CURR_DESC_PTR) +#define bfin_write_DMA23_CURR_DESC_PTR(val) bfin_write32(DMA23_CURR_DESC_PTR) +#define bfin_read_DMA23_CURR_ADDR() bfin_read32(DMA23_CURR_ADDR) +#define bfin_write_DMA23_CURR_ADDR(val) bfin_write32(DMA23_CURR_ADDR) +#define bfin_read_DMA23_IRQ_STATUS() bfin_read16(DMA23_IRQ_STATUS) +#define bfin_write_DMA23_IRQ_STATUS(val) bfin_write16(DMA23_IRQ_STATUS, val) +#define bfin_read_DMA23_PERIPHERAL_MAP() bfin_read16(DMA23_PERIPHERAL_MAP) +#define bfin_write_DMA23_PERIPHERAL_MAP(val) bfin_write16(DMA23_PERIPHERAL_MAP, val) +#define bfin_read_DMA23_CURR_X_COUNT() bfin_read16(DMA23_CURR_X_COUNT) +#define bfin_write_DMA23_CURR_X_COUNT(val) bfin_write16(DMA23_CURR_X_COUNT, val) +#define bfin_read_DMA23_CURR_Y_COUNT() bfin_read16(DMA23_CURR_Y_COUNT) +#define bfin_write_DMA23_CURR_Y_COUNT(val) bfin_write16(DMA23_CURR_Y_COUNT, val) + +/* MDMA Stream 2 Registers */ + +#define bfin_read_MDMA_D2_NEXT_DESC_PTR() bfin_read32(MDMA_D2_NEXT_DESC_PTR) +#define bfin_write_MDMA_D2_NEXT_DESC_PTR(val) bfin_write32(MDMA_D2_NEXT_DESC_PTR) +#define bfin_read_MDMA_D2_START_ADDR() bfin_read32(MDMA_D2_START_ADDR) +#define bfin_write_MDMA_D2_START_ADDR(val) bfin_write32(MDMA_D2_START_ADDR) +#define bfin_read_MDMA_D2_CONFIG() bfin_read16(MDMA_D2_CONFIG) +#define bfin_write_MDMA_D2_CONFIG(val) bfin_write16(MDMA_D2_CONFIG, val) +#define bfin_read_MDMA_D2_X_COUNT() bfin_read16(MDMA_D2_X_COUNT) +#define bfin_write_MDMA_D2_X_COUNT(val) bfin_write16(MDMA_D2_X_COUNT, val) +#define bfin_read_MDMA_D2_X_MODIFY() bfin_read16(MDMA_D2_X_MODIFY) +#define bfin_write_MDMA_D2_X_MODIFY(val) bfin_write16(MDMA_D2_X_MODIFY) +#define bfin_read_MDMA_D2_Y_COUNT() bfin_read16(MDMA_D2_Y_COUNT) +#define bfin_write_MDMA_D2_Y_COUNT(val) bfin_write16(MDMA_D2_Y_COUNT, val) +#define bfin_read_MDMA_D2_Y_MODIFY() bfin_read16(MDMA_D2_Y_MODIFY) +#define bfin_write_MDMA_D2_Y_MODIFY(val) bfin_write16(MDMA_D2_Y_MODIFY) +#define bfin_read_MDMA_D2_CURR_DESC_PTR() bfin_read32(MDMA_D2_CURR_DESC_PTR) +#define bfin_write_MDMA_D2_CURR_DESC_PTR(val) bfin_write32(MDMA_D2_CURR_DESC_PTR) +#define bfin_read_MDMA_D2_CURR_ADDR() bfin_read32(MDMA_D2_CURR_ADDR) +#define bfin_write_MDMA_D2_CURR_ADDR(val) bfin_write32(MDMA_D2_CURR_ADDR) +#define bfin_read_MDMA_D2_IRQ_STATUS() bfin_read16(MDMA_D2_IRQ_STATUS) +#define bfin_write_MDMA_D2_IRQ_STATUS(val) bfin_write16(MDMA_D2_IRQ_STATUS, val) +#define bfin_read_MDMA_D2_PERIPHERAL_MAP() bfin_read16(MDMA_D2_PERIPHERAL_MAP) +#define bfin_write_MDMA_D2_PERIPHERAL_MAP(val) bfin_write16(MDMA_D2_PERIPHERAL_MAP, val) +#define bfin_read_MDMA_D2_CURR_X_COUNT() bfin_read16(MDMA_D2_CURR_X_COUNT) +#define bfin_write_MDMA_D2_CURR_X_COUNT(val) bfin_write16(MDMA_D2_CURR_X_COUNT, val) +#define bfin_read_MDMA_D2_CURR_Y_COUNT() bfin_read16(MDMA_D2_CURR_Y_COUNT) +#define bfin_write_MDMA_D2_CURR_Y_COUNT(val) bfin_write16(MDMA_D2_CURR_Y_COUNT, val) +#define bfin_read_MDMA_S2_NEXT_DESC_PTR() bfin_read32(MDMA_S2_NEXT_DESC_PTR) +#define bfin_write_MDMA_S2_NEXT_DESC_PTR(val) bfin_write32(MDMA_S2_NEXT_DESC_PTR) +#define bfin_read_MDMA_S2_START_ADDR() bfin_read32(MDMA_S2_START_ADDR) +#define bfin_write_MDMA_S2_START_ADDR(val) bfin_write32(MDMA_S2_START_ADDR) +#define bfin_read_MDMA_S2_CONFIG() bfin_read16(MDMA_S2_CONFIG) +#define bfin_write_MDMA_S2_CONFIG(val) bfin_write16(MDMA_S2_CONFIG, val) +#define bfin_read_MDMA_S2_X_COUNT() bfin_read16(MDMA_S2_X_COUNT) +#define bfin_write_MDMA_S2_X_COUNT(val) bfin_write16(MDMA_S2_X_COUNT, val) +#define bfin_read_MDMA_S2_X_MODIFY() bfin_read16(MDMA_S2_X_MODIFY) +#define bfin_write_MDMA_S2_X_MODIFY(val) bfin_write16(MDMA_S2_X_MODIFY) +#define bfin_read_MDMA_S2_Y_COUNT() bfin_read16(MDMA_S2_Y_COUNT) +#define bfin_write_MDMA_S2_Y_COUNT(val) bfin_write16(MDMA_S2_Y_COUNT, val) +#define bfin_read_MDMA_S2_Y_MODIFY() bfin_read16(MDMA_S2_Y_MODIFY) +#define bfin_write_MDMA_S2_Y_MODIFY(val) bfin_write16(MDMA_S2_Y_MODIFY) +#define bfin_read_MDMA_S2_CURR_DESC_PTR() bfin_read32(MDMA_S2_CURR_DESC_PTR) +#define bfin_write_MDMA_S2_CURR_DESC_PTR(val) bfin_write32(MDMA_S2_CURR_DESC_PTR) +#define bfin_read_MDMA_S2_CURR_ADDR() bfin_read32(MDMA_S2_CURR_ADDR) +#define bfin_write_MDMA_S2_CURR_ADDR(val) bfin_write32(MDMA_S2_CURR_ADDR) +#define bfin_read_MDMA_S2_IRQ_STATUS() bfin_read16(MDMA_S2_IRQ_STATUS) +#define bfin_write_MDMA_S2_IRQ_STATUS(val) bfin_write16(MDMA_S2_IRQ_STATUS, val) +#define bfin_read_MDMA_S2_PERIPHERAL_MAP() bfin_read16(MDMA_S2_PERIPHERAL_MAP) +#define bfin_write_MDMA_S2_PERIPHERAL_MAP(val) bfin_write16(MDMA_S2_PERIPHERAL_MAP, val) +#define bfin_read_MDMA_S2_CURR_X_COUNT() bfin_read16(MDMA_S2_CURR_X_COUNT) +#define bfin_write_MDMA_S2_CURR_X_COUNT(val) bfin_write16(MDMA_S2_CURR_X_COUNT, val) +#define bfin_read_MDMA_S2_CURR_Y_COUNT() bfin_read16(MDMA_S2_CURR_Y_COUNT) +#define bfin_write_MDMA_S2_CURR_Y_COUNT(val) bfin_write16(MDMA_S2_CURR_Y_COUNT, val) + +/* MDMA Stream 3 Registers */ + +#define bfin_read_MDMA_D3_NEXT_DESC_PTR() bfin_read32(MDMA_D3_NEXT_DESC_PTR) +#define bfin_write_MDMA_D3_NEXT_DESC_PTR(val) bfin_write32(MDMA_D3_NEXT_DESC_PTR) +#define bfin_read_MDMA_D3_START_ADDR() bfin_read32(MDMA_D3_START_ADDR) +#define bfin_write_MDMA_D3_START_ADDR(val) bfin_write32(MDMA_D3_START_ADDR) +#define bfin_read_MDMA_D3_CONFIG() bfin_read16(MDMA_D3_CONFIG) +#define bfin_write_MDMA_D3_CONFIG(val) bfin_write16(MDMA_D3_CONFIG, val) +#define bfin_read_MDMA_D3_X_COUNT() bfin_read16(MDMA_D3_X_COUNT) +#define bfin_write_MDMA_D3_X_COUNT(val) bfin_write16(MDMA_D3_X_COUNT, val) +#define bfin_read_MDMA_D3_X_MODIFY() bfin_read16(MDMA_D3_X_MODIFY) +#define bfin_write_MDMA_D3_X_MODIFY(val) bfin_write16(MDMA_D3_X_MODIFY) +#define bfin_read_MDMA_D3_Y_COUNT() bfin_read16(MDMA_D3_Y_COUNT) +#define bfin_write_MDMA_D3_Y_COUNT(val) bfin_write16(MDMA_D3_Y_COUNT, val) +#define bfin_read_MDMA_D3_Y_MODIFY() bfin_read16(MDMA_D3_Y_MODIFY) +#define bfin_write_MDMA_D3_Y_MODIFY(val) bfin_write16(MDMA_D3_Y_MODIFY) +#define bfin_read_MDMA_D3_CURR_DESC_PTR() bfin_read32(MDMA_D3_CURR_DESC_PTR) +#define bfin_write_MDMA_D3_CURR_DESC_PTR(val) bfin_write32(MDMA_D3_CURR_DESC_PTR) +#define bfin_read_MDMA_D3_CURR_ADDR() bfin_read32(MDMA_D3_CURR_ADDR) +#define bfin_write_MDMA_D3_CURR_ADDR(val) bfin_write32(MDMA_D3_CURR_ADDR) +#define bfin_read_MDMA_D3_IRQ_STATUS() bfin_read16(MDMA_D3_IRQ_STATUS) +#define bfin_write_MDMA_D3_IRQ_STATUS(val) bfin_write16(MDMA_D3_IRQ_STATUS, val) +#define bfin_read_MDMA_D3_PERIPHERAL_MAP() bfin_read16(MDMA_D3_PERIPHERAL_MAP) +#define bfin_write_MDMA_D3_PERIPHERAL_MAP(val) bfin_write16(MDMA_D3_PERIPHERAL_MAP, val) +#define bfin_read_MDMA_D3_CURR_X_COUNT() bfin_read16(MDMA_D3_CURR_X_COUNT) +#define bfin_write_MDMA_D3_CURR_X_COUNT(val) bfin_write16(MDMA_D3_CURR_X_COUNT, val) +#define bfin_read_MDMA_D3_CURR_Y_COUNT() bfin_read16(MDMA_D3_CURR_Y_COUNT) +#define bfin_write_MDMA_D3_CURR_Y_COUNT(val) bfin_write16(MDMA_D3_CURR_Y_COUNT, val) +#define bfin_read_MDMA_S3_NEXT_DESC_PTR() bfin_read32(MDMA_S3_NEXT_DESC_PTR) +#define bfin_write_MDMA_S3_NEXT_DESC_PTR(val) bfin_write32(MDMA_S3_NEXT_DESC_PTR) +#define bfin_read_MDMA_S3_START_ADDR() bfin_read32(MDMA_S3_START_ADDR) +#define bfin_write_MDMA_S3_START_ADDR(val) bfin_write32(MDMA_S3_START_ADDR) +#define bfin_read_MDMA_S3_CONFIG() bfin_read16(MDMA_S3_CONFIG) +#define bfin_write_MDMA_S3_CONFIG(val) bfin_write16(MDMA_S3_CONFIG, val) +#define bfin_read_MDMA_S3_X_COUNT() bfin_read16(MDMA_S3_X_COUNT) +#define bfin_write_MDMA_S3_X_COUNT(val) bfin_write16(MDMA_S3_X_COUNT, val) +#define bfin_read_MDMA_S3_X_MODIFY() bfin_read16(MDMA_S3_X_MODIFY) +#define bfin_write_MDMA_S3_X_MODIFY(val) bfin_write16(MDMA_S3_X_MODIFY) +#define bfin_read_MDMA_S3_Y_COUNT() bfin_read16(MDMA_S3_Y_COUNT) +#define bfin_write_MDMA_S3_Y_COUNT(val) bfin_write16(MDMA_S3_Y_COUNT, val) +#define bfin_read_MDMA_S3_Y_MODIFY() bfin_read16(MDMA_S3_Y_MODIFY) +#define bfin_write_MDMA_S3_Y_MODIFY(val) bfin_write16(MDMA_S3_Y_MODIFY) +#define bfin_read_MDMA_S3_CURR_DESC_PTR() bfin_read32(MDMA_S3_CURR_DESC_PTR) +#define bfin_write_MDMA_S3_CURR_DESC_PTR(val) bfin_write32(MDMA_S3_CURR_DESC_PTR) +#define bfin_read_MDMA_S3_CURR_ADDR() bfin_read32(MDMA_S3_CURR_ADDR) +#define bfin_write_MDMA_S3_CURR_ADDR(val) bfin_write32(MDMA_S3_CURR_ADDR) +#define bfin_read_MDMA_S3_IRQ_STATUS() bfin_read16(MDMA_S3_IRQ_STATUS) +#define bfin_write_MDMA_S3_IRQ_STATUS(val) bfin_write16(MDMA_S3_IRQ_STATUS, val) +#define bfin_read_MDMA_S3_PERIPHERAL_MAP() bfin_read16(MDMA_S3_PERIPHERAL_MAP) +#define bfin_write_MDMA_S3_PERIPHERAL_MAP(val) bfin_write16(MDMA_S3_PERIPHERAL_MAP, val) +#define bfin_read_MDMA_S3_CURR_X_COUNT() bfin_read16(MDMA_S3_CURR_X_COUNT) +#define bfin_write_MDMA_S3_CURR_X_COUNT(val) bfin_write16(MDMA_S3_CURR_X_COUNT, val) +#define bfin_read_MDMA_S3_CURR_Y_COUNT() bfin_read16(MDMA_S3_CURR_Y_COUNT) +#define bfin_write_MDMA_S3_CURR_Y_COUNT(val) bfin_write16(MDMA_S3_CURR_Y_COUNT, val) + +/* UART1 Registers */ + +#define bfin_read_UART1_DLL() bfin_read16(UART1_DLL) +#define bfin_write_UART1_DLL(val) bfin_write16(UART1_DLL, val) +#define bfin_read_UART1_DLH() bfin_read16(UART1_DLH) +#define bfin_write_UART1_DLH(val) bfin_write16(UART1_DLH, val) +#define bfin_read_UART1_GCTL() bfin_read16(UART1_GCTL) +#define bfin_write_UART1_GCTL(val) bfin_write16(UART1_GCTL, val) +#define bfin_read_UART1_LCR() bfin_read16(UART1_LCR) +#define bfin_write_UART1_LCR(val) bfin_write16(UART1_LCR, val) +#define bfin_read_UART1_MCR() bfin_read16(UART1_MCR) +#define bfin_write_UART1_MCR(val) bfin_write16(UART1_MCR, val) +#define bfin_read_UART1_LSR() bfin_read16(UART1_LSR) +#define bfin_write_UART1_LSR(val) bfin_write16(UART1_LSR, val) +#define bfin_read_UART1_MSR() bfin_read16(UART1_MSR) +#define bfin_write_UART1_MSR(val) bfin_write16(UART1_MSR, val) +#define bfin_read_UART1_SCR() bfin_read16(UART1_SCR) +#define bfin_write_UART1_SCR(val) bfin_write16(UART1_SCR, val) +#define bfin_read_UART1_IER_SET() bfin_read16(UART1_IER_SET) +#define bfin_write_UART1_IER_SET(val) bfin_write16(UART1_IER_SET, val) +#define bfin_read_UART1_IER_CLEAR() bfin_read16(UART1_IER_CLEAR) +#define bfin_write_UART1_IER_CLEAR(val) bfin_write16(UART1_IER_CLEAR, val) +#define bfin_read_UART1_THR() bfin_read16(UART1_THR) +#define bfin_write_UART1_THR(val) bfin_write16(UART1_THR, val) +#define bfin_read_UART1_RBR() bfin_read16(UART1_RBR) +#define bfin_write_UART1_RBR(val) bfin_write16(UART1_RBR, val) + +/* UART2 is not defined in the shared file because it is not available on the ADSP-BF542 and ADSP-BF544 bfin_read_()rocessors */ + +/* SPI1 Registers */ + +#define bfin_read_SPI1_CTL() bfin_read16(SPI1_CTL) +#define bfin_write_SPI1_CTL(val) bfin_write16(SPI1_CTL, val) +#define bfin_read_SPI1_FLG() bfin_read16(SPI1_FLG) +#define bfin_write_SPI1_FLG(val) bfin_write16(SPI1_FLG, val) +#define bfin_read_SPI1_STAT() bfin_read16(SPI1_STAT) +#define bfin_write_SPI1_STAT(val) bfin_write16(SPI1_STAT, val) +#define bfin_read_SPI1_TDBR() bfin_read16(SPI1_TDBR) +#define bfin_write_SPI1_TDBR(val) bfin_write16(SPI1_TDBR, val) +#define bfin_read_SPI1_RDBR() bfin_read16(SPI1_RDBR) +#define bfin_write_SPI1_RDBR(val) bfin_write16(SPI1_RDBR, val) +#define bfin_read_SPI1_BAUD() bfin_read16(SPI1_BAUD) +#define bfin_write_SPI1_BAUD(val) bfin_write16(SPI1_BAUD, val) +#define bfin_read_SPI1_SHADOW() bfin_read16(SPI1_SHADOW) +#define bfin_write_SPI1_SHADOW(val) bfin_write16(SPI1_SHADOW, val) + +/* SPORT2 Registers */ + +#define bfin_read_SPORT2_TCR1() bfin_read16(SPORT2_TCR1) +#define bfin_write_SPORT2_TCR1(val) bfin_write16(SPORT2_TCR1, val) +#define bfin_read_SPORT2_TCR2() bfin_read16(SPORT2_TCR2) +#define bfin_write_SPORT2_TCR2(val) bfin_write16(SPORT2_TCR2, val) +#define bfin_read_SPORT2_TCLKDIV() bfin_read16(SPORT2_TCLKDIV) +#define bfin_write_SPORT2_TCLKDIV(val) bfin_write16(SPORT2_TCLKDIV, val) +#define bfin_read_SPORT2_TFSDIV() bfin_read16(SPORT2_TFSDIV) +#define bfin_write_SPORT2_TFSDIV(val) bfin_write16(SPORT2_TFSDIV, val) +#define bfin_read_SPORT2_TX() bfin_read32(SPORT2_TX) +#define bfin_write_SPORT2_TX(val) bfin_write32(SPORT2_TX, val) +#define bfin_read_SPORT2_RX() bfin_read32(SPORT2_RX) +#define bfin_write_SPORT2_RX(val) bfin_write32(SPORT2_RX, val) +#define bfin_read_SPORT2_RCR1() bfin_read16(SPORT2_RCR1) +#define bfin_write_SPORT2_RCR1(val) bfin_write16(SPORT2_RCR1, val) +#define bfin_read_SPORT2_RCR2() bfin_read16(SPORT2_RCR2) +#define bfin_write_SPORT2_RCR2(val) bfin_write16(SPORT2_RCR2, val) +#define bfin_read_SPORT2_RCLKDIV() bfin_read16(SPORT2_RCLKDIV) +#define bfin_write_SPORT2_RCLKDIV(val) bfin_write16(SPORT2_RCLKDIV, val) +#define bfin_read_SPORT2_RFSDIV() bfin_read16(SPORT2_RFSDIV) +#define bfin_write_SPORT2_RFSDIV(val) bfin_write16(SPORT2_RFSDIV, val) +#define bfin_read_SPORT2_STAT() bfin_read16(SPORT2_STAT) +#define bfin_write_SPORT2_STAT(val) bfin_write16(SPORT2_STAT, val) +#define bfin_read_SPORT2_CHNL() bfin_read16(SPORT2_CHNL) +#define bfin_write_SPORT2_CHNL(val) bfin_write16(SPORT2_CHNL, val) +#define bfin_read_SPORT2_MCMC1() bfin_read16(SPORT2_MCMC1) +#define bfin_write_SPORT2_MCMC1(val) bfin_write16(SPORT2_MCMC1, val) +#define bfin_read_SPORT2_MCMC2() bfin_read16(SPORT2_MCMC2) +#define bfin_write_SPORT2_MCMC2(val) bfin_write16(SPORT2_MCMC2, val) +#define bfin_read_SPORT2_MTCS0() bfin_read32(SPORT2_MTCS0) +#define bfin_write_SPORT2_MTCS0(val) bfin_write32(SPORT2_MTCS0, val) +#define bfin_read_SPORT2_MTCS1() bfin_read32(SPORT2_MTCS1) +#define bfin_write_SPORT2_MTCS1(val) bfin_write32(SPORT2_MTCS1, val) +#define bfin_read_SPORT2_MTCS2() bfin_read32(SPORT2_MTCS2) +#define bfin_write_SPORT2_MTCS2(val) bfin_write32(SPORT2_MTCS2, val) +#define bfin_read_SPORT2_MTCS3() bfin_read32(SPORT2_MTCS3) +#define bfin_write_SPORT2_MTCS3(val) bfin_write32(SPORT2_MTCS3, val) +#define bfin_read_SPORT2_MRCS0() bfin_read32(SPORT2_MRCS0) +#define bfin_write_SPORT2_MRCS0(val) bfin_write32(SPORT2_MRCS0, val) +#define bfin_read_SPORT2_MRCS1() bfin_read32(SPORT2_MRCS1) +#define bfin_write_SPORT2_MRCS1(val) bfin_write32(SPORT2_MRCS1, val) +#define bfin_read_SPORT2_MRCS2() bfin_read32(SPORT2_MRCS2) +#define bfin_write_SPORT2_MRCS2(val) bfin_write32(SPORT2_MRCS2, val) +#define bfin_read_SPORT2_MRCS3() bfin_read32(SPORT2_MRCS3) +#define bfin_write_SPORT2_MRCS3(val) bfin_write32(SPORT2_MRCS3, val) + +/* SPORT3 Registers */ + +#define bfin_read_SPORT3_TCR1() bfin_read16(SPORT3_TCR1) +#define bfin_write_SPORT3_TCR1(val) bfin_write16(SPORT3_TCR1, val) +#define bfin_read_SPORT3_TCR2() bfin_read16(SPORT3_TCR2) +#define bfin_write_SPORT3_TCR2(val) bfin_write16(SPORT3_TCR2, val) +#define bfin_read_SPORT3_TCLKDIV() bfin_read16(SPORT3_TCLKDIV) +#define bfin_write_SPORT3_TCLKDIV(val) bfin_write16(SPORT3_TCLKDIV, val) +#define bfin_read_SPORT3_TFSDIV() bfin_read16(SPORT3_TFSDIV) +#define bfin_write_SPORT3_TFSDIV(val) bfin_write16(SPORT3_TFSDIV, val) +#define bfin_read_SPORT3_TX() bfin_read32(SPORT3_TX) +#define bfin_write_SPORT3_TX(val) bfin_write32(SPORT3_TX, val) +#define bfin_read_SPORT3_RX() bfin_read32(SPORT3_RX) +#define bfin_write_SPORT3_RX(val) bfin_write32(SPORT3_RX, val) +#define bfin_read_SPORT3_RCR1() bfin_read16(SPORT3_RCR1) +#define bfin_write_SPORT3_RCR1(val) bfin_write16(SPORT3_RCR1, val) +#define bfin_read_SPORT3_RCR2() bfin_read16(SPORT3_RCR2) +#define bfin_write_SPORT3_RCR2(val) bfin_write16(SPORT3_RCR2, val) +#define bfin_read_SPORT3_RCLKDIV() bfin_read16(SPORT3_RCLKDIV) +#define bfin_write_SPORT3_RCLKDIV(val) bfin_write16(SPORT3_RCLKDIV, val) +#define bfin_read_SPORT3_RFSDIV() bfin_read16(SPORT3_RFSDIV) +#define bfin_write_SPORT3_RFSDIV(val) bfin_write16(SPORT3_RFSDIV, val) +#define bfin_read_SPORT3_STAT() bfin_read16(SPORT3_STAT) +#define bfin_write_SPORT3_STAT(val) bfin_write16(SPORT3_STAT, val) +#define bfin_read_SPORT3_CHNL() bfin_read16(SPORT3_CHNL) +#define bfin_write_SPORT3_CHNL(val) bfin_write16(SPORT3_CHNL, val) +#define bfin_read_SPORT3_MCMC1() bfin_read16(SPORT3_MCMC1) +#define bfin_write_SPORT3_MCMC1(val) bfin_write16(SPORT3_MCMC1, val) +#define bfin_read_SPORT3_MCMC2() bfin_read16(SPORT3_MCMC2) +#define bfin_write_SPORT3_MCMC2(val) bfin_write16(SPORT3_MCMC2, val) +#define bfin_read_SPORT3_MTCS0() bfin_read32(SPORT3_MTCS0) +#define bfin_write_SPORT3_MTCS0(val) bfin_write32(SPORT3_MTCS0, val) +#define bfin_read_SPORT3_MTCS1() bfin_read32(SPORT3_MTCS1) +#define bfin_write_SPORT3_MTCS1(val) bfin_write32(SPORT3_MTCS1, val) +#define bfin_read_SPORT3_MTCS2() bfin_read32(SPORT3_MTCS2) +#define bfin_write_SPORT3_MTCS2(val) bfin_write32(SPORT3_MTCS2, val) +#define bfin_read_SPORT3_MTCS3() bfin_read32(SPORT3_MTCS3) +#define bfin_write_SPORT3_MTCS3(val) bfin_write32(SPORT3_MTCS3, val) +#define bfin_read_SPORT3_MRCS0() bfin_read32(SPORT3_MRCS0) +#define bfin_write_SPORT3_MRCS0(val) bfin_write32(SPORT3_MRCS0, val) +#define bfin_read_SPORT3_MRCS1() bfin_read32(SPORT3_MRCS1) +#define bfin_write_SPORT3_MRCS1(val) bfin_write32(SPORT3_MRCS1, val) +#define bfin_read_SPORT3_MRCS2() bfin_read32(SPORT3_MRCS2) +#define bfin_write_SPORT3_MRCS2(val) bfin_write32(SPORT3_MRCS2, val) +#define bfin_read_SPORT3_MRCS3() bfin_read32(SPORT3_MRCS3) +#define bfin_write_SPORT3_MRCS3(val) bfin_write32(SPORT3_MRCS3, val) + +/* EPPI2 Registers */ + +#define bfin_read_EPPI2_STATUS() bfin_read16(EPPI2_STATUS) +#define bfin_write_EPPI2_STATUS(val) bfin_write16(EPPI2_STATUS, val) +#define bfin_read_EPPI2_HCOUNT() bfin_read16(EPPI2_HCOUNT) +#define bfin_write_EPPI2_HCOUNT(val) bfin_write16(EPPI2_HCOUNT, val) +#define bfin_read_EPPI2_HDELAY() bfin_read16(EPPI2_HDELAY) +#define bfin_write_EPPI2_HDELAY(val) bfin_write16(EPPI2_HDELAY, val) +#define bfin_read_EPPI2_VCOUNT() bfin_read16(EPPI2_VCOUNT) +#define bfin_write_EPPI2_VCOUNT(val) bfin_write16(EPPI2_VCOUNT, val) +#define bfin_read_EPPI2_VDELAY() bfin_read16(EPPI2_VDELAY) +#define bfin_write_EPPI2_VDELAY(val) bfin_write16(EPPI2_VDELAY, val) +#define bfin_read_EPPI2_FRAME() bfin_read16(EPPI2_FRAME) +#define bfin_write_EPPI2_FRAME(val) bfin_write16(EPPI2_FRAME, val) +#define bfin_read_EPPI2_LINE() bfin_read16(EPPI2_LINE) +#define bfin_write_EPPI2_LINE(val) bfin_write16(EPPI2_LINE, val) +#define bfin_read_EPPI2_CLKDIV() bfin_read16(EPPI2_CLKDIV) +#define bfin_write_EPPI2_CLKDIV(val) bfin_write16(EPPI2_CLKDIV, val) +#define bfin_read_EPPI2_CONTROL() bfin_read32(EPPI2_CONTROL) +#define bfin_write_EPPI2_CONTROL(val) bfin_write32(EPPI2_CONTROL, val) +#define bfin_read_EPPI2_FS1W_HBL() bfin_read32(EPPI2_FS1W_HBL) +#define bfin_write_EPPI2_FS1W_HBL(val) bfin_write32(EPPI2_FS1W_HBL, val) +#define bfin_read_EPPI2_FS1P_AVPL() bfin_read32(EPPI2_FS1P_AVPL) +#define bfin_write_EPPI2_FS1P_AVPL(val) bfin_write32(EPPI2_FS1P_AVPL, val) +#define bfin_read_EPPI2_FS2W_LVB() bfin_read32(EPPI2_FS2W_LVB) +#define bfin_write_EPPI2_FS2W_LVB(val) bfin_write32(EPPI2_FS2W_LVB, val) +#define bfin_read_EPPI2_FS2P_LAVF() bfin_read32(EPPI2_FS2P_LAVF) +#define bfin_write_EPPI2_FS2P_LAVF(val) bfin_write32(EPPI2_FS2P_LAVF, val) +#define bfin_read_EPPI2_CLIP() bfin_read32(EPPI2_CLIP) +#define bfin_write_EPPI2_CLIP(val) bfin_write32(EPPI2_CLIP, val) + +/* CAN Controller 0 Config 1 Registers */ + +#define bfin_read_CAN0_MC1() bfin_read16(CAN0_MC1) +#define bfin_write_CAN0_MC1(val) bfin_write16(CAN0_MC1, val) +#define bfin_read_CAN0_MD1() bfin_read16(CAN0_MD1) +#define bfin_write_CAN0_MD1(val) bfin_write16(CAN0_MD1, val) +#define bfin_read_CAN0_TRS1() bfin_read16(CAN0_TRS1) +#define bfin_write_CAN0_TRS1(val) bfin_write16(CAN0_TRS1, val) +#define bfin_read_CAN0_TRR1() bfin_read16(CAN0_TRR1) +#define bfin_write_CAN0_TRR1(val) bfin_write16(CAN0_TRR1, val) +#define bfin_read_CAN0_TA1() bfin_read16(CAN0_TA1) +#define bfin_write_CAN0_TA1(val) bfin_write16(CAN0_TA1, val) +#define bfin_read_CAN0_AA1() bfin_read16(CAN0_AA1) +#define bfin_write_CAN0_AA1(val) bfin_write16(CAN0_AA1, val) +#define bfin_read_CAN0_RMP1() bfin_read16(CAN0_RMP1) +#define bfin_write_CAN0_RMP1(val) bfin_write16(CAN0_RMP1, val) +#define bfin_read_CAN0_RML1() bfin_read16(CAN0_RML1) +#define bfin_write_CAN0_RML1(val) bfin_write16(CAN0_RML1, val) +#define bfin_read_CAN0_MBTIF1() bfin_read16(CAN0_MBTIF1) +#define bfin_write_CAN0_MBTIF1(val) bfin_write16(CAN0_MBTIF1, val) +#define bfin_read_CAN0_MBRIF1() bfin_read16(CAN0_MBRIF1) +#define bfin_write_CAN0_MBRIF1(val) bfin_write16(CAN0_MBRIF1, val) +#define bfin_read_CAN0_MBIM1() bfin_read16(CAN0_MBIM1) +#define bfin_write_CAN0_MBIM1(val) bfin_write16(CAN0_MBIM1, val) +#define bfin_read_CAN0_RFH1() bfin_read16(CAN0_RFH1) +#define bfin_write_CAN0_RFH1(val) bfin_write16(CAN0_RFH1, val) +#define bfin_read_CAN0_OPSS1() bfin_read16(CAN0_OPSS1) +#define bfin_write_CAN0_OPSS1(val) bfin_write16(CAN0_OPSS1, val) + +/* CAN Controller 0 Config 2 Registers */ + +#define bfin_read_CAN0_MC2() bfin_read16(CAN0_MC2) +#define bfin_write_CAN0_MC2(val) bfin_write16(CAN0_MC2, val) +#define bfin_read_CAN0_MD2() bfin_read16(CAN0_MD2) +#define bfin_write_CAN0_MD2(val) bfin_write16(CAN0_MD2, val) +#define bfin_read_CAN0_TRS2() bfin_read16(CAN0_TRS2) +#define bfin_write_CAN0_TRS2(val) bfin_write16(CAN0_TRS2, val) +#define bfin_read_CAN0_TRR2() bfin_read16(CAN0_TRR2) +#define bfin_write_CAN0_TRR2(val) bfin_write16(CAN0_TRR2, val) +#define bfin_read_CAN0_TA2() bfin_read16(CAN0_TA2) +#define bfin_write_CAN0_TA2(val) bfin_write16(CAN0_TA2, val) +#define bfin_read_CAN0_AA2() bfin_read16(CAN0_AA2) +#define bfin_write_CAN0_AA2(val) bfin_write16(CAN0_AA2, val) +#define bfin_read_CAN0_RMP2() bfin_read16(CAN0_RMP2) +#define bfin_write_CAN0_RMP2(val) bfin_write16(CAN0_RMP2, val) +#define bfin_read_CAN0_RML2() bfin_read16(CAN0_RML2) +#define bfin_write_CAN0_RML2(val) bfin_write16(CAN0_RML2, val) +#define bfin_read_CAN0_MBTIF2() bfin_read16(CAN0_MBTIF2) +#define bfin_write_CAN0_MBTIF2(val) bfin_write16(CAN0_MBTIF2, val) +#define bfin_read_CAN0_MBRIF2() bfin_read16(CAN0_MBRIF2) +#define bfin_write_CAN0_MBRIF2(val) bfin_write16(CAN0_MBRIF2, val) +#define bfin_read_CAN0_MBIM2() bfin_read16(CAN0_MBIM2) +#define bfin_write_CAN0_MBIM2(val) bfin_write16(CAN0_MBIM2, val) +#define bfin_read_CAN0_RFH2() bfin_read16(CAN0_RFH2) +#define bfin_write_CAN0_RFH2(val) bfin_write16(CAN0_RFH2, val) +#define bfin_read_CAN0_OPSS2() bfin_read16(CAN0_OPSS2) +#define bfin_write_CAN0_OPSS2(val) bfin_write16(CAN0_OPSS2, val) + +/* CAN Controller 0 Clock/Interrubfin_read_()t/Counter Registers */ + +#define bfin_read_CAN0_CLOCK() bfin_read16(CAN0_CLOCK) +#define bfin_write_CAN0_CLOCK(val) bfin_write16(CAN0_CLOCK, val) +#define bfin_read_CAN0_TIMING() bfin_read16(CAN0_TIMING) +#define bfin_write_CAN0_TIMING(val) bfin_write16(CAN0_TIMING, val) +#define bfin_read_CAN0_DEBUG() bfin_read16(CAN0_DEBUG) +#define bfin_write_CAN0_DEBUG(val) bfin_write16(CAN0_DEBUG, val) +#define bfin_read_CAN0_STATUS() bfin_read16(CAN0_STATUS) +#define bfin_write_CAN0_STATUS(val) bfin_write16(CAN0_STATUS, val) +#define bfin_read_CAN0_CEC() bfin_read16(CAN0_CEC) +#define bfin_write_CAN0_CEC(val) bfin_write16(CAN0_CEC, val) +#define bfin_read_CAN0_GIS() bfin_read16(CAN0_GIS) +#define bfin_write_CAN0_GIS(val) bfin_write16(CAN0_GIS, val) +#define bfin_read_CAN0_GIM() bfin_read16(CAN0_GIM) +#define bfin_write_CAN0_GIM(val) bfin_write16(CAN0_GIM, val) +#define bfin_read_CAN0_GIF() bfin_read16(CAN0_GIF) +#define bfin_write_CAN0_GIF(val) bfin_write16(CAN0_GIF, val) +#define bfin_read_CAN0_CONTROL() bfin_read16(CAN0_CONTROL) +#define bfin_write_CAN0_CONTROL(val) bfin_write16(CAN0_CONTROL, val) +#define bfin_read_CAN0_INTR() bfin_read16(CAN0_INTR) +#define bfin_write_CAN0_INTR(val) bfin_write16(CAN0_INTR, val) +#define bfin_read_CAN0_MBTD() bfin_read16(CAN0_MBTD) +#define bfin_write_CAN0_MBTD(val) bfin_write16(CAN0_MBTD, val) +#define bfin_read_CAN0_EWR() bfin_read16(CAN0_EWR) +#define bfin_write_CAN0_EWR(val) bfin_write16(CAN0_EWR, val) +#define bfin_read_CAN0_ESR() bfin_read16(CAN0_ESR) +#define bfin_write_CAN0_ESR(val) bfin_write16(CAN0_ESR, val) +#define bfin_read_CAN0_UCCNT() bfin_read16(CAN0_UCCNT) +#define bfin_write_CAN0_UCCNT(val) bfin_write16(CAN0_UCCNT, val) +#define bfin_read_CAN0_UCRC() bfin_read16(CAN0_UCRC) +#define bfin_write_CAN0_UCRC(val) bfin_write16(CAN0_UCRC, val) +#define bfin_read_CAN0_UCCNF() bfin_read16(CAN0_UCCNF) +#define bfin_write_CAN0_UCCNF(val) bfin_write16(CAN0_UCCNF, val) + +/* CAN Controller 0 Accebfin_read_()tance Registers */ + +#define bfin_read_CAN0_AM00L() bfin_read16(CAN0_AM00L) +#define bfin_write_CAN0_AM00L(val) bfin_write16(CAN0_AM00L, val) +#define bfin_read_CAN0_AM00H() bfin_read16(CAN0_AM00H) +#define bfin_write_CAN0_AM00H(val) bfin_write16(CAN0_AM00H, val) +#define bfin_read_CAN0_AM01L() bfin_read16(CAN0_AM01L) +#define bfin_write_CAN0_AM01L(val) bfin_write16(CAN0_AM01L, val) +#define bfin_read_CAN0_AM01H() bfin_read16(CAN0_AM01H) +#define bfin_write_CAN0_AM01H(val) bfin_write16(CAN0_AM01H, val) +#define bfin_read_CAN0_AM02L() bfin_read16(CAN0_AM02L) +#define bfin_write_CAN0_AM02L(val) bfin_write16(CAN0_AM02L, val) +#define bfin_read_CAN0_AM02H() bfin_read16(CAN0_AM02H) +#define bfin_write_CAN0_AM02H(val) bfin_write16(CAN0_AM02H, val) +#define bfin_read_CAN0_AM03L() bfin_read16(CAN0_AM03L) +#define bfin_write_CAN0_AM03L(val) bfin_write16(CAN0_AM03L, val) +#define bfin_read_CAN0_AM03H() bfin_read16(CAN0_AM03H) +#define bfin_write_CAN0_AM03H(val) bfin_write16(CAN0_AM03H, val) +#define bfin_read_CAN0_AM04L() bfin_read16(CAN0_AM04L) +#define bfin_write_CAN0_AM04L(val) bfin_write16(CAN0_AM04L, val) +#define bfin_read_CAN0_AM04H() bfin_read16(CAN0_AM04H) +#define bfin_write_CAN0_AM04H(val) bfin_write16(CAN0_AM04H, val) +#define bfin_read_CAN0_AM05L() bfin_read16(CAN0_AM05L) +#define bfin_write_CAN0_AM05L(val) bfin_write16(CAN0_AM05L, val) +#define bfin_read_CAN0_AM05H() bfin_read16(CAN0_AM05H) +#define bfin_write_CAN0_AM05H(val) bfin_write16(CAN0_AM05H, val) +#define bfin_read_CAN0_AM06L() bfin_read16(CAN0_AM06L) +#define bfin_write_CAN0_AM06L(val) bfin_write16(CAN0_AM06L, val) +#define bfin_read_CAN0_AM06H() bfin_read16(CAN0_AM06H) +#define bfin_write_CAN0_AM06H(val) bfin_write16(CAN0_AM06H, val) +#define bfin_read_CAN0_AM07L() bfin_read16(CAN0_AM07L) +#define bfin_write_CAN0_AM07L(val) bfin_write16(CAN0_AM07L, val) +#define bfin_read_CAN0_AM07H() bfin_read16(CAN0_AM07H) +#define bfin_write_CAN0_AM07H(val) bfin_write16(CAN0_AM07H, val) +#define bfin_read_CAN0_AM08L() bfin_read16(CAN0_AM08L) +#define bfin_write_CAN0_AM08L(val) bfin_write16(CAN0_AM08L, val) +#define bfin_read_CAN0_AM08H() bfin_read16(CAN0_AM08H) +#define bfin_write_CAN0_AM08H(val) bfin_write16(CAN0_AM08H, val) +#define bfin_read_CAN0_AM09L() bfin_read16(CAN0_AM09L) +#define bfin_write_CAN0_AM09L(val) bfin_write16(CAN0_AM09L, val) +#define bfin_read_CAN0_AM09H() bfin_read16(CAN0_AM09H) +#define bfin_write_CAN0_AM09H(val) bfin_write16(CAN0_AM09H, val) +#define bfin_read_CAN0_AM10L() bfin_read16(CAN0_AM10L) +#define bfin_write_CAN0_AM10L(val) bfin_write16(CAN0_AM10L, val) +#define bfin_read_CAN0_AM10H() bfin_read16(CAN0_AM10H) +#define bfin_write_CAN0_AM10H(val) bfin_write16(CAN0_AM10H, val) +#define bfin_read_CAN0_AM11L() bfin_read16(CAN0_AM11L) +#define bfin_write_CAN0_AM11L(val) bfin_write16(CAN0_AM11L, val) +#define bfin_read_CAN0_AM11H() bfin_read16(CAN0_AM11H) +#define bfin_write_CAN0_AM11H(val) bfin_write16(CAN0_AM11H, val) +#define bfin_read_CAN0_AM12L() bfin_read16(CAN0_AM12L) +#define bfin_write_CAN0_AM12L(val) bfin_write16(CAN0_AM12L, val) +#define bfin_read_CAN0_AM12H() bfin_read16(CAN0_AM12H) +#define bfin_write_CAN0_AM12H(val) bfin_write16(CAN0_AM12H, val) +#define bfin_read_CAN0_AM13L() bfin_read16(CAN0_AM13L) +#define bfin_write_CAN0_AM13L(val) bfin_write16(CAN0_AM13L, val) +#define bfin_read_CAN0_AM13H() bfin_read16(CAN0_AM13H) +#define bfin_write_CAN0_AM13H(val) bfin_write16(CAN0_AM13H, val) +#define bfin_read_CAN0_AM14L() bfin_read16(CAN0_AM14L) +#define bfin_write_CAN0_AM14L(val) bfin_write16(CAN0_AM14L, val) +#define bfin_read_CAN0_AM14H() bfin_read16(CAN0_AM14H) +#define bfin_write_CAN0_AM14H(val) bfin_write16(CAN0_AM14H, val) +#define bfin_read_CAN0_AM15L() bfin_read16(CAN0_AM15L) +#define bfin_write_CAN0_AM15L(val) bfin_write16(CAN0_AM15L, val) +#define bfin_read_CAN0_AM15H() bfin_read16(CAN0_AM15H) +#define bfin_write_CAN0_AM15H(val) bfin_write16(CAN0_AM15H, val) + +/* CAN Controller 0 Accebfin_read_()tance Registers */ + +#define bfin_read_CAN0_AM16L() bfin_read16(CAN0_AM16L) +#define bfin_write_CAN0_AM16L(val) bfin_write16(CAN0_AM16L, val) +#define bfin_read_CAN0_AM16H() bfin_read16(CAN0_AM16H) +#define bfin_write_CAN0_AM16H(val) bfin_write16(CAN0_AM16H, val) +#define bfin_read_CAN0_AM17L() bfin_read16(CAN0_AM17L) +#define bfin_write_CAN0_AM17L(val) bfin_write16(CAN0_AM17L, val) +#define bfin_read_CAN0_AM17H() bfin_read16(CAN0_AM17H) +#define bfin_write_CAN0_AM17H(val) bfin_write16(CAN0_AM17H, val) +#define bfin_read_CAN0_AM18L() bfin_read16(CAN0_AM18L) +#define bfin_write_CAN0_AM18L(val) bfin_write16(CAN0_AM18L, val) +#define bfin_read_CAN0_AM18H() bfin_read16(CAN0_AM18H) +#define bfin_write_CAN0_AM18H(val) bfin_write16(CAN0_AM18H, val) +#define bfin_read_CAN0_AM19L() bfin_read16(CAN0_AM19L) +#define bfin_write_CAN0_AM19L(val) bfin_write16(CAN0_AM19L, val) +#define bfin_read_CAN0_AM19H() bfin_read16(CAN0_AM19H) +#define bfin_write_CAN0_AM19H(val) bfin_write16(CAN0_AM19H, val) +#define bfin_read_CAN0_AM20L() bfin_read16(CAN0_AM20L) +#define bfin_write_CAN0_AM20L(val) bfin_write16(CAN0_AM20L, val) +#define bfin_read_CAN0_AM20H() bfin_read16(CAN0_AM20H) +#define bfin_write_CAN0_AM20H(val) bfin_write16(CAN0_AM20H, val) +#define bfin_read_CAN0_AM21L() bfin_read16(CAN0_AM21L) +#define bfin_write_CAN0_AM21L(val) bfin_write16(CAN0_AM21L, val) +#define bfin_read_CAN0_AM21H() bfin_read16(CAN0_AM21H) +#define bfin_write_CAN0_AM21H(val) bfin_write16(CAN0_AM21H, val) +#define bfin_read_CAN0_AM22L() bfin_read16(CAN0_AM22L) +#define bfin_write_CAN0_AM22L(val) bfin_write16(CAN0_AM22L, val) +#define bfin_read_CAN0_AM22H() bfin_read16(CAN0_AM22H) +#define bfin_write_CAN0_AM22H(val) bfin_write16(CAN0_AM22H, val) +#define bfin_read_CAN0_AM23L() bfin_read16(CAN0_AM23L) +#define bfin_write_CAN0_AM23L(val) bfin_write16(CAN0_AM23L, val) +#define bfin_read_CAN0_AM23H() bfin_read16(CAN0_AM23H) +#define bfin_write_CAN0_AM23H(val) bfin_write16(CAN0_AM23H, val) +#define bfin_read_CAN0_AM24L() bfin_read16(CAN0_AM24L) +#define bfin_write_CAN0_AM24L(val) bfin_write16(CAN0_AM24L, val) +#define bfin_read_CAN0_AM24H() bfin_read16(CAN0_AM24H) +#define bfin_write_CAN0_AM24H(val) bfin_write16(CAN0_AM24H, val) +#define bfin_read_CAN0_AM25L() bfin_read16(CAN0_AM25L) +#define bfin_write_CAN0_AM25L(val) bfin_write16(CAN0_AM25L, val) +#define bfin_read_CAN0_AM25H() bfin_read16(CAN0_AM25H) +#define bfin_write_CAN0_AM25H(val) bfin_write16(CAN0_AM25H, val) +#define bfin_read_CAN0_AM26L() bfin_read16(CAN0_AM26L) +#define bfin_write_CAN0_AM26L(val) bfin_write16(CAN0_AM26L, val) +#define bfin_read_CAN0_AM26H() bfin_read16(CAN0_AM26H) +#define bfin_write_CAN0_AM26H(val) bfin_write16(CAN0_AM26H, val) +#define bfin_read_CAN0_AM27L() bfin_read16(CAN0_AM27L) +#define bfin_write_CAN0_AM27L(val) bfin_write16(CAN0_AM27L, val) +#define bfin_read_CAN0_AM27H() bfin_read16(CAN0_AM27H) +#define bfin_write_CAN0_AM27H(val) bfin_write16(CAN0_AM27H, val) +#define bfin_read_CAN0_AM28L() bfin_read16(CAN0_AM28L) +#define bfin_write_CAN0_AM28L(val) bfin_write16(CAN0_AM28L, val) +#define bfin_read_CAN0_AM28H() bfin_read16(CAN0_AM28H) +#define bfin_write_CAN0_AM28H(val) bfin_write16(CAN0_AM28H, val) +#define bfin_read_CAN0_AM29L() bfin_read16(CAN0_AM29L) +#define bfin_write_CAN0_AM29L(val) bfin_write16(CAN0_AM29L, val) +#define bfin_read_CAN0_AM29H() bfin_read16(CAN0_AM29H) +#define bfin_write_CAN0_AM29H(val) bfin_write16(CAN0_AM29H, val) +#define bfin_read_CAN0_AM30L() bfin_read16(CAN0_AM30L) +#define bfin_write_CAN0_AM30L(val) bfin_write16(CAN0_AM30L, val) +#define bfin_read_CAN0_AM30H() bfin_read16(CAN0_AM30H) +#define bfin_write_CAN0_AM30H(val) bfin_write16(CAN0_AM30H, val) +#define bfin_read_CAN0_AM31L() bfin_read16(CAN0_AM31L) +#define bfin_write_CAN0_AM31L(val) bfin_write16(CAN0_AM31L, val) +#define bfin_read_CAN0_AM31H() bfin_read16(CAN0_AM31H) +#define bfin_write_CAN0_AM31H(val) bfin_write16(CAN0_AM31H, val) + +/* CAN Controller 0 Mailbox Data Registers */ + +#define bfin_read_CAN0_MB00_DATA0() bfin_read16(CAN0_MB00_DATA0) +#define bfin_write_CAN0_MB00_DATA0(val) bfin_write16(CAN0_MB00_DATA0, val) +#define bfin_read_CAN0_MB00_DATA1() bfin_read16(CAN0_MB00_DATA1) +#define bfin_write_CAN0_MB00_DATA1(val) bfin_write16(CAN0_MB00_DATA1, val) +#define bfin_read_CAN0_MB00_DATA2() bfin_read16(CAN0_MB00_DATA2) +#define bfin_write_CAN0_MB00_DATA2(val) bfin_write16(CAN0_MB00_DATA2, val) +#define bfin_read_CAN0_MB00_DATA3() bfin_read16(CAN0_MB00_DATA3) +#define bfin_write_CAN0_MB00_DATA3(val) bfin_write16(CAN0_MB00_DATA3, val) +#define bfin_read_CAN0_MB00_LENGTH() bfin_read16(CAN0_MB00_LENGTH) +#define bfin_write_CAN0_MB00_LENGTH(val) bfin_write16(CAN0_MB00_LENGTH, val) +#define bfin_read_CAN0_MB00_TIMESTAMP() bfin_read16(CAN0_MB00_TIMESTAMP) +#define bfin_write_CAN0_MB00_TIMESTAMP(val) bfin_write16(CAN0_MB00_TIMESTAMP, val) +#define bfin_read_CAN0_MB00_ID0() bfin_read16(CAN0_MB00_ID0) +#define bfin_write_CAN0_MB00_ID0(val) bfin_write16(CAN0_MB00_ID0, val) +#define bfin_read_CAN0_MB00_ID1() bfin_read16(CAN0_MB00_ID1) +#define bfin_write_CAN0_MB00_ID1(val) bfin_write16(CAN0_MB00_ID1, val) +#define bfin_read_CAN0_MB01_DATA0() bfin_read16(CAN0_MB01_DATA0) +#define bfin_write_CAN0_MB01_DATA0(val) bfin_write16(CAN0_MB01_DATA0, val) +#define bfin_read_CAN0_MB01_DATA1() bfin_read16(CAN0_MB01_DATA1) +#define bfin_write_CAN0_MB01_DATA1(val) bfin_write16(CAN0_MB01_DATA1, val) +#define bfin_read_CAN0_MB01_DATA2() bfin_read16(CAN0_MB01_DATA2) +#define bfin_write_CAN0_MB01_DATA2(val) bfin_write16(CAN0_MB01_DATA2, val) +#define bfin_read_CAN0_MB01_DATA3() bfin_read16(CAN0_MB01_DATA3) +#define bfin_write_CAN0_MB01_DATA3(val) bfin_write16(CAN0_MB01_DATA3, val) +#define bfin_read_CAN0_MB01_LENGTH() bfin_read16(CAN0_MB01_LENGTH) +#define bfin_write_CAN0_MB01_LENGTH(val) bfin_write16(CAN0_MB01_LENGTH, val) +#define bfin_read_CAN0_MB01_TIMESTAMP() bfin_read16(CAN0_MB01_TIMESTAMP) +#define bfin_write_CAN0_MB01_TIMESTAMP(val) bfin_write16(CAN0_MB01_TIMESTAMP, val) +#define bfin_read_CAN0_MB01_ID0() bfin_read16(CAN0_MB01_ID0) +#define bfin_write_CAN0_MB01_ID0(val) bfin_write16(CAN0_MB01_ID0, val) +#define bfin_read_CAN0_MB01_ID1() bfin_read16(CAN0_MB01_ID1) +#define bfin_write_CAN0_MB01_ID1(val) bfin_write16(CAN0_MB01_ID1, val) +#define bfin_read_CAN0_MB02_DATA0() bfin_read16(CAN0_MB02_DATA0) +#define bfin_write_CAN0_MB02_DATA0(val) bfin_write16(CAN0_MB02_DATA0, val) +#define bfin_read_CAN0_MB02_DATA1() bfin_read16(CAN0_MB02_DATA1) +#define bfin_write_CAN0_MB02_DATA1(val) bfin_write16(CAN0_MB02_DATA1, val) +#define bfin_read_CAN0_MB02_DATA2() bfin_read16(CAN0_MB02_DATA2) +#define bfin_write_CAN0_MB02_DATA2(val) bfin_write16(CAN0_MB02_DATA2, val) +#define bfin_read_CAN0_MB02_DATA3() bfin_read16(CAN0_MB02_DATA3) +#define bfin_write_CAN0_MB02_DATA3(val) bfin_write16(CAN0_MB02_DATA3, val) +#define bfin_read_CAN0_MB02_LENGTH() bfin_read16(CAN0_MB02_LENGTH) +#define bfin_write_CAN0_MB02_LENGTH(val) bfin_write16(CAN0_MB02_LENGTH, val) +#define bfin_read_CAN0_MB02_TIMESTAMP() bfin_read16(CAN0_MB02_TIMESTAMP) +#define bfin_write_CAN0_MB02_TIMESTAMP(val) bfin_write16(CAN0_MB02_TIMESTAMP, val) +#define bfin_read_CAN0_MB02_ID0() bfin_read16(CAN0_MB02_ID0) +#define bfin_write_CAN0_MB02_ID0(val) bfin_write16(CAN0_MB02_ID0, val) +#define bfin_read_CAN0_MB02_ID1() bfin_read16(CAN0_MB02_ID1) +#define bfin_write_CAN0_MB02_ID1(val) bfin_write16(CAN0_MB02_ID1, val) +#define bfin_read_CAN0_MB03_DATA0() bfin_read16(CAN0_MB03_DATA0) +#define bfin_write_CAN0_MB03_DATA0(val) bfin_write16(CAN0_MB03_DATA0, val) +#define bfin_read_CAN0_MB03_DATA1() bfin_read16(CAN0_MB03_DATA1) +#define bfin_write_CAN0_MB03_DATA1(val) bfin_write16(CAN0_MB03_DATA1, val) +#define bfin_read_CAN0_MB03_DATA2() bfin_read16(CAN0_MB03_DATA2) +#define bfin_write_CAN0_MB03_DATA2(val) bfin_write16(CAN0_MB03_DATA2, val) +#define bfin_read_CAN0_MB03_DATA3() bfin_read16(CAN0_MB03_DATA3) +#define bfin_write_CAN0_MB03_DATA3(val) bfin_write16(CAN0_MB03_DATA3, val) +#define bfin_read_CAN0_MB03_LENGTH() bfin_read16(CAN0_MB03_LENGTH) +#define bfin_write_CAN0_MB03_LENGTH(val) bfin_write16(CAN0_MB03_LENGTH, val) +#define bfin_read_CAN0_MB03_TIMESTAMP() bfin_read16(CAN0_MB03_TIMESTAMP) +#define bfin_write_CAN0_MB03_TIMESTAMP(val) bfin_write16(CAN0_MB03_TIMESTAMP, val) +#define bfin_read_CAN0_MB03_ID0() bfin_read16(CAN0_MB03_ID0) +#define bfin_write_CAN0_MB03_ID0(val) bfin_write16(CAN0_MB03_ID0, val) +#define bfin_read_CAN0_MB03_ID1() bfin_read16(CAN0_MB03_ID1) +#define bfin_write_CAN0_MB03_ID1(val) bfin_write16(CAN0_MB03_ID1, val) +#define bfin_read_CAN0_MB04_DATA0() bfin_read16(CAN0_MB04_DATA0) +#define bfin_write_CAN0_MB04_DATA0(val) bfin_write16(CAN0_MB04_DATA0, val) +#define bfin_read_CAN0_MB04_DATA1() bfin_read16(CAN0_MB04_DATA1) +#define bfin_write_CAN0_MB04_DATA1(val) bfin_write16(CAN0_MB04_DATA1, val) +#define bfin_read_CAN0_MB04_DATA2() bfin_read16(CAN0_MB04_DATA2) +#define bfin_write_CAN0_MB04_DATA2(val) bfin_write16(CAN0_MB04_DATA2, val) +#define bfin_read_CAN0_MB04_DATA3() bfin_read16(CAN0_MB04_DATA3) +#define bfin_write_CAN0_MB04_DATA3(val) bfin_write16(CAN0_MB04_DATA3, val) +#define bfin_read_CAN0_MB04_LENGTH() bfin_read16(CAN0_MB04_LENGTH) +#define bfin_write_CAN0_MB04_LENGTH(val) bfin_write16(CAN0_MB04_LENGTH, val) +#define bfin_read_CAN0_MB04_TIMESTAMP() bfin_read16(CAN0_MB04_TIMESTAMP) +#define bfin_write_CAN0_MB04_TIMESTAMP(val) bfin_write16(CAN0_MB04_TIMESTAMP, val) +#define bfin_read_CAN0_MB04_ID0() bfin_read16(CAN0_MB04_ID0) +#define bfin_write_CAN0_MB04_ID0(val) bfin_write16(CAN0_MB04_ID0, val) +#define bfin_read_CAN0_MB04_ID1() bfin_read16(CAN0_MB04_ID1) +#define bfin_write_CAN0_MB04_ID1(val) bfin_write16(CAN0_MB04_ID1, val) +#define bfin_read_CAN0_MB05_DATA0() bfin_read16(CAN0_MB05_DATA0) +#define bfin_write_CAN0_MB05_DATA0(val) bfin_write16(CAN0_MB05_DATA0, val) +#define bfin_read_CAN0_MB05_DATA1() bfin_read16(CAN0_MB05_DATA1) +#define bfin_write_CAN0_MB05_DATA1(val) bfin_write16(CAN0_MB05_DATA1, val) +#define bfin_read_CAN0_MB05_DATA2() bfin_read16(CAN0_MB05_DATA2) +#define bfin_write_CAN0_MB05_DATA2(val) bfin_write16(CAN0_MB05_DATA2, val) +#define bfin_read_CAN0_MB05_DATA3() bfin_read16(CAN0_MB05_DATA3) +#define bfin_write_CAN0_MB05_DATA3(val) bfin_write16(CAN0_MB05_DATA3, val) +#define bfin_read_CAN0_MB05_LENGTH() bfin_read16(CAN0_MB05_LENGTH) +#define bfin_write_CAN0_MB05_LENGTH(val) bfin_write16(CAN0_MB05_LENGTH, val) +#define bfin_read_CAN0_MB05_TIMESTAMP() bfin_read16(CAN0_MB05_TIMESTAMP) +#define bfin_write_CAN0_MB05_TIMESTAMP(val) bfin_write16(CAN0_MB05_TIMESTAMP, val) +#define bfin_read_CAN0_MB05_ID0() bfin_read16(CAN0_MB05_ID0) +#define bfin_write_CAN0_MB05_ID0(val) bfin_write16(CAN0_MB05_ID0, val) +#define bfin_read_CAN0_MB05_ID1() bfin_read16(CAN0_MB05_ID1) +#define bfin_write_CAN0_MB05_ID1(val) bfin_write16(CAN0_MB05_ID1, val) +#define bfin_read_CAN0_MB06_DATA0() bfin_read16(CAN0_MB06_DATA0) +#define bfin_write_CAN0_MB06_DATA0(val) bfin_write16(CAN0_MB06_DATA0, val) +#define bfin_read_CAN0_MB06_DATA1() bfin_read16(CAN0_MB06_DATA1) +#define bfin_write_CAN0_MB06_DATA1(val) bfin_write16(CAN0_MB06_DATA1, val) +#define bfin_read_CAN0_MB06_DATA2() bfin_read16(CAN0_MB06_DATA2) +#define bfin_write_CAN0_MB06_DATA2(val) bfin_write16(CAN0_MB06_DATA2, val) +#define bfin_read_CAN0_MB06_DATA3() bfin_read16(CAN0_MB06_DATA3) +#define bfin_write_CAN0_MB06_DATA3(val) bfin_write16(CAN0_MB06_DATA3, val) +#define bfin_read_CAN0_MB06_LENGTH() bfin_read16(CAN0_MB06_LENGTH) +#define bfin_write_CAN0_MB06_LENGTH(val) bfin_write16(CAN0_MB06_LENGTH, val) +#define bfin_read_CAN0_MB06_TIMESTAMP() bfin_read16(CAN0_MB06_TIMESTAMP) +#define bfin_write_CAN0_MB06_TIMESTAMP(val) bfin_write16(CAN0_MB06_TIMESTAMP, val) +#define bfin_read_CAN0_MB06_ID0() bfin_read16(CAN0_MB06_ID0) +#define bfin_write_CAN0_MB06_ID0(val) bfin_write16(CAN0_MB06_ID0, val) +#define bfin_read_CAN0_MB06_ID1() bfin_read16(CAN0_MB06_ID1) +#define bfin_write_CAN0_MB06_ID1(val) bfin_write16(CAN0_MB06_ID1, val) +#define bfin_read_CAN0_MB07_DATA0() bfin_read16(CAN0_MB07_DATA0) +#define bfin_write_CAN0_MB07_DATA0(val) bfin_write16(CAN0_MB07_DATA0, val) +#define bfin_read_CAN0_MB07_DATA1() bfin_read16(CAN0_MB07_DATA1) +#define bfin_write_CAN0_MB07_DATA1(val) bfin_write16(CAN0_MB07_DATA1, val) +#define bfin_read_CAN0_MB07_DATA2() bfin_read16(CAN0_MB07_DATA2) +#define bfin_write_CAN0_MB07_DATA2(val) bfin_write16(CAN0_MB07_DATA2, val) +#define bfin_read_CAN0_MB07_DATA3() bfin_read16(CAN0_MB07_DATA3) +#define bfin_write_CAN0_MB07_DATA3(val) bfin_write16(CAN0_MB07_DATA3, val) +#define bfin_read_CAN0_MB07_LENGTH() bfin_read16(CAN0_MB07_LENGTH) +#define bfin_write_CAN0_MB07_LENGTH(val) bfin_write16(CAN0_MB07_LENGTH, val) +#define bfin_read_CAN0_MB07_TIMESTAMP() bfin_read16(CAN0_MB07_TIMESTAMP) +#define bfin_write_CAN0_MB07_TIMESTAMP(val) bfin_write16(CAN0_MB07_TIMESTAMP, val) +#define bfin_read_CAN0_MB07_ID0() bfin_read16(CAN0_MB07_ID0) +#define bfin_write_CAN0_MB07_ID0(val) bfin_write16(CAN0_MB07_ID0, val) +#define bfin_read_CAN0_MB07_ID1() bfin_read16(CAN0_MB07_ID1) +#define bfin_write_CAN0_MB07_ID1(val) bfin_write16(CAN0_MB07_ID1, val) +#define bfin_read_CAN0_MB08_DATA0() bfin_read16(CAN0_MB08_DATA0) +#define bfin_write_CAN0_MB08_DATA0(val) bfin_write16(CAN0_MB08_DATA0, val) +#define bfin_read_CAN0_MB08_DATA1() bfin_read16(CAN0_MB08_DATA1) +#define bfin_write_CAN0_MB08_DATA1(val) bfin_write16(CAN0_MB08_DATA1, val) +#define bfin_read_CAN0_MB08_DATA2() bfin_read16(CAN0_MB08_DATA2) +#define bfin_write_CAN0_MB08_DATA2(val) bfin_write16(CAN0_MB08_DATA2, val) +#define bfin_read_CAN0_MB08_DATA3() bfin_read16(CAN0_MB08_DATA3) +#define bfin_write_CAN0_MB08_DATA3(val) bfin_write16(CAN0_MB08_DATA3, val) +#define bfin_read_CAN0_MB08_LENGTH() bfin_read16(CAN0_MB08_LENGTH) +#define bfin_write_CAN0_MB08_LENGTH(val) bfin_write16(CAN0_MB08_LENGTH, val) +#define bfin_read_CAN0_MB08_TIMESTAMP() bfin_read16(CAN0_MB08_TIMESTAMP) +#define bfin_write_CAN0_MB08_TIMESTAMP(val) bfin_write16(CAN0_MB08_TIMESTAMP, val) +#define bfin_read_CAN0_MB08_ID0() bfin_read16(CAN0_MB08_ID0) +#define bfin_write_CAN0_MB08_ID0(val) bfin_write16(CAN0_MB08_ID0, val) +#define bfin_read_CAN0_MB08_ID1() bfin_read16(CAN0_MB08_ID1) +#define bfin_write_CAN0_MB08_ID1(val) bfin_write16(CAN0_MB08_ID1, val) +#define bfin_read_CAN0_MB09_DATA0() bfin_read16(CAN0_MB09_DATA0) +#define bfin_write_CAN0_MB09_DATA0(val) bfin_write16(CAN0_MB09_DATA0, val) +#define bfin_read_CAN0_MB09_DATA1() bfin_read16(CAN0_MB09_DATA1) +#define bfin_write_CAN0_MB09_DATA1(val) bfin_write16(CAN0_MB09_DATA1, val) +#define bfin_read_CAN0_MB09_DATA2() bfin_read16(CAN0_MB09_DATA2) +#define bfin_write_CAN0_MB09_DATA2(val) bfin_write16(CAN0_MB09_DATA2, val) +#define bfin_read_CAN0_MB09_DATA3() bfin_read16(CAN0_MB09_DATA3) +#define bfin_write_CAN0_MB09_DATA3(val) bfin_write16(CAN0_MB09_DATA3, val) +#define bfin_read_CAN0_MB09_LENGTH() bfin_read16(CAN0_MB09_LENGTH) +#define bfin_write_CAN0_MB09_LENGTH(val) bfin_write16(CAN0_MB09_LENGTH, val) +#define bfin_read_CAN0_MB09_TIMESTAMP() bfin_read16(CAN0_MB09_TIMESTAMP) +#define bfin_write_CAN0_MB09_TIMESTAMP(val) bfin_write16(CAN0_MB09_TIMESTAMP, val) +#define bfin_read_CAN0_MB09_ID0() bfin_read16(CAN0_MB09_ID0) +#define bfin_write_CAN0_MB09_ID0(val) bfin_write16(CAN0_MB09_ID0, val) +#define bfin_read_CAN0_MB09_ID1() bfin_read16(CAN0_MB09_ID1) +#define bfin_write_CAN0_MB09_ID1(val) bfin_write16(CAN0_MB09_ID1, val) +#define bfin_read_CAN0_MB10_DATA0() bfin_read16(CAN0_MB10_DATA0) +#define bfin_write_CAN0_MB10_DATA0(val) bfin_write16(CAN0_MB10_DATA0, val) +#define bfin_read_CAN0_MB10_DATA1() bfin_read16(CAN0_MB10_DATA1) +#define bfin_write_CAN0_MB10_DATA1(val) bfin_write16(CAN0_MB10_DATA1, val) +#define bfin_read_CAN0_MB10_DATA2() bfin_read16(CAN0_MB10_DATA2) +#define bfin_write_CAN0_MB10_DATA2(val) bfin_write16(CAN0_MB10_DATA2, val) +#define bfin_read_CAN0_MB10_DATA3() bfin_read16(CAN0_MB10_DATA3) +#define bfin_write_CAN0_MB10_DATA3(val) bfin_write16(CAN0_MB10_DATA3, val) +#define bfin_read_CAN0_MB10_LENGTH() bfin_read16(CAN0_MB10_LENGTH) +#define bfin_write_CAN0_MB10_LENGTH(val) bfin_write16(CAN0_MB10_LENGTH, val) +#define bfin_read_CAN0_MB10_TIMESTAMP() bfin_read16(CAN0_MB10_TIMESTAMP) +#define bfin_write_CAN0_MB10_TIMESTAMP(val) bfin_write16(CAN0_MB10_TIMESTAMP, val) +#define bfin_read_CAN0_MB10_ID0() bfin_read16(CAN0_MB10_ID0) +#define bfin_write_CAN0_MB10_ID0(val) bfin_write16(CAN0_MB10_ID0, val) +#define bfin_read_CAN0_MB10_ID1() bfin_read16(CAN0_MB10_ID1) +#define bfin_write_CAN0_MB10_ID1(val) bfin_write16(CAN0_MB10_ID1, val) +#define bfin_read_CAN0_MB11_DATA0() bfin_read16(CAN0_MB11_DATA0) +#define bfin_write_CAN0_MB11_DATA0(val) bfin_write16(CAN0_MB11_DATA0, val) +#define bfin_read_CAN0_MB11_DATA1() bfin_read16(CAN0_MB11_DATA1) +#define bfin_write_CAN0_MB11_DATA1(val) bfin_write16(CAN0_MB11_DATA1, val) +#define bfin_read_CAN0_MB11_DATA2() bfin_read16(CAN0_MB11_DATA2) +#define bfin_write_CAN0_MB11_DATA2(val) bfin_write16(CAN0_MB11_DATA2, val) +#define bfin_read_CAN0_MB11_DATA3() bfin_read16(CAN0_MB11_DATA3) +#define bfin_write_CAN0_MB11_DATA3(val) bfin_write16(CAN0_MB11_DATA3, val) +#define bfin_read_CAN0_MB11_LENGTH() bfin_read16(CAN0_MB11_LENGTH) +#define bfin_write_CAN0_MB11_LENGTH(val) bfin_write16(CAN0_MB11_LENGTH, val) +#define bfin_read_CAN0_MB11_TIMESTAMP() bfin_read16(CAN0_MB11_TIMESTAMP) +#define bfin_write_CAN0_MB11_TIMESTAMP(val) bfin_write16(CAN0_MB11_TIMESTAMP, val) +#define bfin_read_CAN0_MB11_ID0() bfin_read16(CAN0_MB11_ID0) +#define bfin_write_CAN0_MB11_ID0(val) bfin_write16(CAN0_MB11_ID0, val) +#define bfin_read_CAN0_MB11_ID1() bfin_read16(CAN0_MB11_ID1) +#define bfin_write_CAN0_MB11_ID1(val) bfin_write16(CAN0_MB11_ID1, val) +#define bfin_read_CAN0_MB12_DATA0() bfin_read16(CAN0_MB12_DATA0) +#define bfin_write_CAN0_MB12_DATA0(val) bfin_write16(CAN0_MB12_DATA0, val) +#define bfin_read_CAN0_MB12_DATA1() bfin_read16(CAN0_MB12_DATA1) +#define bfin_write_CAN0_MB12_DATA1(val) bfin_write16(CAN0_MB12_DATA1, val) +#define bfin_read_CAN0_MB12_DATA2() bfin_read16(CAN0_MB12_DATA2) +#define bfin_write_CAN0_MB12_DATA2(val) bfin_write16(CAN0_MB12_DATA2, val) +#define bfin_read_CAN0_MB12_DATA3() bfin_read16(CAN0_MB12_DATA3) +#define bfin_write_CAN0_MB12_DATA3(val) bfin_write16(CAN0_MB12_DATA3, val) +#define bfin_read_CAN0_MB12_LENGTH() bfin_read16(CAN0_MB12_LENGTH) +#define bfin_write_CAN0_MB12_LENGTH(val) bfin_write16(CAN0_MB12_LENGTH, val) +#define bfin_read_CAN0_MB12_TIMESTAMP() bfin_read16(CAN0_MB12_TIMESTAMP) +#define bfin_write_CAN0_MB12_TIMESTAMP(val) bfin_write16(CAN0_MB12_TIMESTAMP, val) +#define bfin_read_CAN0_MB12_ID0() bfin_read16(CAN0_MB12_ID0) +#define bfin_write_CAN0_MB12_ID0(val) bfin_write16(CAN0_MB12_ID0, val) +#define bfin_read_CAN0_MB12_ID1() bfin_read16(CAN0_MB12_ID1) +#define bfin_write_CAN0_MB12_ID1(val) bfin_write16(CAN0_MB12_ID1, val) +#define bfin_read_CAN0_MB13_DATA0() bfin_read16(CAN0_MB13_DATA0) +#define bfin_write_CAN0_MB13_DATA0(val) bfin_write16(CAN0_MB13_DATA0, val) +#define bfin_read_CAN0_MB13_DATA1() bfin_read16(CAN0_MB13_DATA1) +#define bfin_write_CAN0_MB13_DATA1(val) bfin_write16(CAN0_MB13_DATA1, val) +#define bfin_read_CAN0_MB13_DATA2() bfin_read16(CAN0_MB13_DATA2) +#define bfin_write_CAN0_MB13_DATA2(val) bfin_write16(CAN0_MB13_DATA2, val) +#define bfin_read_CAN0_MB13_DATA3() bfin_read16(CAN0_MB13_DATA3) +#define bfin_write_CAN0_MB13_DATA3(val) bfin_write16(CAN0_MB13_DATA3, val) +#define bfin_read_CAN0_MB13_LENGTH() bfin_read16(CAN0_MB13_LENGTH) +#define bfin_write_CAN0_MB13_LENGTH(val) bfin_write16(CAN0_MB13_LENGTH, val) +#define bfin_read_CAN0_MB13_TIMESTAMP() bfin_read16(CAN0_MB13_TIMESTAMP) +#define bfin_write_CAN0_MB13_TIMESTAMP(val) bfin_write16(CAN0_MB13_TIMESTAMP, val) +#define bfin_read_CAN0_MB13_ID0() bfin_read16(CAN0_MB13_ID0) +#define bfin_write_CAN0_MB13_ID0(val) bfin_write16(CAN0_MB13_ID0, val) +#define bfin_read_CAN0_MB13_ID1() bfin_read16(CAN0_MB13_ID1) +#define bfin_write_CAN0_MB13_ID1(val) bfin_write16(CAN0_MB13_ID1, val) +#define bfin_read_CAN0_MB14_DATA0() bfin_read16(CAN0_MB14_DATA0) +#define bfin_write_CAN0_MB14_DATA0(val) bfin_write16(CAN0_MB14_DATA0, val) +#define bfin_read_CAN0_MB14_DATA1() bfin_read16(CAN0_MB14_DATA1) +#define bfin_write_CAN0_MB14_DATA1(val) bfin_write16(CAN0_MB14_DATA1, val) +#define bfin_read_CAN0_MB14_DATA2() bfin_read16(CAN0_MB14_DATA2) +#define bfin_write_CAN0_MB14_DATA2(val) bfin_write16(CAN0_MB14_DATA2, val) +#define bfin_read_CAN0_MB14_DATA3() bfin_read16(CAN0_MB14_DATA3) +#define bfin_write_CAN0_MB14_DATA3(val) bfin_write16(CAN0_MB14_DATA3, val) +#define bfin_read_CAN0_MB14_LENGTH() bfin_read16(CAN0_MB14_LENGTH) +#define bfin_write_CAN0_MB14_LENGTH(val) bfin_write16(CAN0_MB14_LENGTH, val) +#define bfin_read_CAN0_MB14_TIMESTAMP() bfin_read16(CAN0_MB14_TIMESTAMP) +#define bfin_write_CAN0_MB14_TIMESTAMP(val) bfin_write16(CAN0_MB14_TIMESTAMP, val) +#define bfin_read_CAN0_MB14_ID0() bfin_read16(CAN0_MB14_ID0) +#define bfin_write_CAN0_MB14_ID0(val) bfin_write16(CAN0_MB14_ID0, val) +#define bfin_read_CAN0_MB14_ID1() bfin_read16(CAN0_MB14_ID1) +#define bfin_write_CAN0_MB14_ID1(val) bfin_write16(CAN0_MB14_ID1, val) +#define bfin_read_CAN0_MB15_DATA0() bfin_read16(CAN0_MB15_DATA0) +#define bfin_write_CAN0_MB15_DATA0(val) bfin_write16(CAN0_MB15_DATA0, val) +#define bfin_read_CAN0_MB15_DATA1() bfin_read16(CAN0_MB15_DATA1) +#define bfin_write_CAN0_MB15_DATA1(val) bfin_write16(CAN0_MB15_DATA1, val) +#define bfin_read_CAN0_MB15_DATA2() bfin_read16(CAN0_MB15_DATA2) +#define bfin_write_CAN0_MB15_DATA2(val) bfin_write16(CAN0_MB15_DATA2, val) +#define bfin_read_CAN0_MB15_DATA3() bfin_read16(CAN0_MB15_DATA3) +#define bfin_write_CAN0_MB15_DATA3(val) bfin_write16(CAN0_MB15_DATA3, val) +#define bfin_read_CAN0_MB15_LENGTH() bfin_read16(CAN0_MB15_LENGTH) +#define bfin_write_CAN0_MB15_LENGTH(val) bfin_write16(CAN0_MB15_LENGTH, val) +#define bfin_read_CAN0_MB15_TIMESTAMP() bfin_read16(CAN0_MB15_TIMESTAMP) +#define bfin_write_CAN0_MB15_TIMESTAMP(val) bfin_write16(CAN0_MB15_TIMESTAMP, val) +#define bfin_read_CAN0_MB15_ID0() bfin_read16(CAN0_MB15_ID0) +#define bfin_write_CAN0_MB15_ID0(val) bfin_write16(CAN0_MB15_ID0, val) +#define bfin_read_CAN0_MB15_ID1() bfin_read16(CAN0_MB15_ID1) +#define bfin_write_CAN0_MB15_ID1(val) bfin_write16(CAN0_MB15_ID1, val) + +/* CAN Controller 0 Mailbox Data Registers */ + +#define bfin_read_CAN0_MB16_DATA0() bfin_read16(CAN0_MB16_DATA0) +#define bfin_write_CAN0_MB16_DATA0(val) bfin_write16(CAN0_MB16_DATA0, val) +#define bfin_read_CAN0_MB16_DATA1() bfin_read16(CAN0_MB16_DATA1) +#define bfin_write_CAN0_MB16_DATA1(val) bfin_write16(CAN0_MB16_DATA1, val) +#define bfin_read_CAN0_MB16_DATA2() bfin_read16(CAN0_MB16_DATA2) +#define bfin_write_CAN0_MB16_DATA2(val) bfin_write16(CAN0_MB16_DATA2, val) +#define bfin_read_CAN0_MB16_DATA3() bfin_read16(CAN0_MB16_DATA3) +#define bfin_write_CAN0_MB16_DATA3(val) bfin_write16(CAN0_MB16_DATA3, val) +#define bfin_read_CAN0_MB16_LENGTH() bfin_read16(CAN0_MB16_LENGTH) +#define bfin_write_CAN0_MB16_LENGTH(val) bfin_write16(CAN0_MB16_LENGTH, val) +#define bfin_read_CAN0_MB16_TIMESTAMP() bfin_read16(CAN0_MB16_TIMESTAMP) +#define bfin_write_CAN0_MB16_TIMESTAMP(val) bfin_write16(CAN0_MB16_TIMESTAMP, val) +#define bfin_read_CAN0_MB16_ID0() bfin_read16(CAN0_MB16_ID0) +#define bfin_write_CAN0_MB16_ID0(val) bfin_write16(CAN0_MB16_ID0, val) +#define bfin_read_CAN0_MB16_ID1() bfin_read16(CAN0_MB16_ID1) +#define bfin_write_CAN0_MB16_ID1(val) bfin_write16(CAN0_MB16_ID1, val) +#define bfin_read_CAN0_MB17_DATA0() bfin_read16(CAN0_MB17_DATA0) +#define bfin_write_CAN0_MB17_DATA0(val) bfin_write16(CAN0_MB17_DATA0, val) +#define bfin_read_CAN0_MB17_DATA1() bfin_read16(CAN0_MB17_DATA1) +#define bfin_write_CAN0_MB17_DATA1(val) bfin_write16(CAN0_MB17_DATA1, val) +#define bfin_read_CAN0_MB17_DATA2() bfin_read16(CAN0_MB17_DATA2) +#define bfin_write_CAN0_MB17_DATA2(val) bfin_write16(CAN0_MB17_DATA2, val) +#define bfin_read_CAN0_MB17_DATA3() bfin_read16(CAN0_MB17_DATA3) +#define bfin_write_CAN0_MB17_DATA3(val) bfin_write16(CAN0_MB17_DATA3, val) +#define bfin_read_CAN0_MB17_LENGTH() bfin_read16(CAN0_MB17_LENGTH) +#define bfin_write_CAN0_MB17_LENGTH(val) bfin_write16(CAN0_MB17_LENGTH, val) +#define bfin_read_CAN0_MB17_TIMESTAMP() bfin_read16(CAN0_MB17_TIMESTAMP) +#define bfin_write_CAN0_MB17_TIMESTAMP(val) bfin_write16(CAN0_MB17_TIMESTAMP, val) +#define bfin_read_CAN0_MB17_ID0() bfin_read16(CAN0_MB17_ID0) +#define bfin_write_CAN0_MB17_ID0(val) bfin_write16(CAN0_MB17_ID0, val) +#define bfin_read_CAN0_MB17_ID1() bfin_read16(CAN0_MB17_ID1) +#define bfin_write_CAN0_MB17_ID1(val) bfin_write16(CAN0_MB17_ID1, val) +#define bfin_read_CAN0_MB18_DATA0() bfin_read16(CAN0_MB18_DATA0) +#define bfin_write_CAN0_MB18_DATA0(val) bfin_write16(CAN0_MB18_DATA0, val) +#define bfin_read_CAN0_MB18_DATA1() bfin_read16(CAN0_MB18_DATA1) +#define bfin_write_CAN0_MB18_DATA1(val) bfin_write16(CAN0_MB18_DATA1, val) +#define bfin_read_CAN0_MB18_DATA2() bfin_read16(CAN0_MB18_DATA2) +#define bfin_write_CAN0_MB18_DATA2(val) bfin_write16(CAN0_MB18_DATA2, val) +#define bfin_read_CAN0_MB18_DATA3() bfin_read16(CAN0_MB18_DATA3) +#define bfin_write_CAN0_MB18_DATA3(val) bfin_write16(CAN0_MB18_DATA3, val) +#define bfin_read_CAN0_MB18_LENGTH() bfin_read16(CAN0_MB18_LENGTH) +#define bfin_write_CAN0_MB18_LENGTH(val) bfin_write16(CAN0_MB18_LENGTH, val) +#define bfin_read_CAN0_MB18_TIMESTAMP() bfin_read16(CAN0_MB18_TIMESTAMP) +#define bfin_write_CAN0_MB18_TIMESTAMP(val) bfin_write16(CAN0_MB18_TIMESTAMP, val) +#define bfin_read_CAN0_MB18_ID0() bfin_read16(CAN0_MB18_ID0) +#define bfin_write_CAN0_MB18_ID0(val) bfin_write16(CAN0_MB18_ID0, val) +#define bfin_read_CAN0_MB18_ID1() bfin_read16(CAN0_MB18_ID1) +#define bfin_write_CAN0_MB18_ID1(val) bfin_write16(CAN0_MB18_ID1, val) +#define bfin_read_CAN0_MB19_DATA0() bfin_read16(CAN0_MB19_DATA0) +#define bfin_write_CAN0_MB19_DATA0(val) bfin_write16(CAN0_MB19_DATA0, val) +#define bfin_read_CAN0_MB19_DATA1() bfin_read16(CAN0_MB19_DATA1) +#define bfin_write_CAN0_MB19_DATA1(val) bfin_write16(CAN0_MB19_DATA1, val) +#define bfin_read_CAN0_MB19_DATA2() bfin_read16(CAN0_MB19_DATA2) +#define bfin_write_CAN0_MB19_DATA2(val) bfin_write16(CAN0_MB19_DATA2, val) +#define bfin_read_CAN0_MB19_DATA3() bfin_read16(CAN0_MB19_DATA3) +#define bfin_write_CAN0_MB19_DATA3(val) bfin_write16(CAN0_MB19_DATA3, val) +#define bfin_read_CAN0_MB19_LENGTH() bfin_read16(CAN0_MB19_LENGTH) +#define bfin_write_CAN0_MB19_LENGTH(val) bfin_write16(CAN0_MB19_LENGTH, val) +#define bfin_read_CAN0_MB19_TIMESTAMP() bfin_read16(CAN0_MB19_TIMESTAMP) +#define bfin_write_CAN0_MB19_TIMESTAMP(val) bfin_write16(CAN0_MB19_TIMESTAMP, val) +#define bfin_read_CAN0_MB19_ID0() bfin_read16(CAN0_MB19_ID0) +#define bfin_write_CAN0_MB19_ID0(val) bfin_write16(CAN0_MB19_ID0, val) +#define bfin_read_CAN0_MB19_ID1() bfin_read16(CAN0_MB19_ID1) +#define bfin_write_CAN0_MB19_ID1(val) bfin_write16(CAN0_MB19_ID1, val) +#define bfin_read_CAN0_MB20_DATA0() bfin_read16(CAN0_MB20_DATA0) +#define bfin_write_CAN0_MB20_DATA0(val) bfin_write16(CAN0_MB20_DATA0, val) +#define bfin_read_CAN0_MB20_DATA1() bfin_read16(CAN0_MB20_DATA1) +#define bfin_write_CAN0_MB20_DATA1(val) bfin_write16(CAN0_MB20_DATA1, val) +#define bfin_read_CAN0_MB20_DATA2() bfin_read16(CAN0_MB20_DATA2) +#define bfin_write_CAN0_MB20_DATA2(val) bfin_write16(CAN0_MB20_DATA2, val) +#define bfin_read_CAN0_MB20_DATA3() bfin_read16(CAN0_MB20_DATA3) +#define bfin_write_CAN0_MB20_DATA3(val) bfin_write16(CAN0_MB20_DATA3, val) +#define bfin_read_CAN0_MB20_LENGTH() bfin_read16(CAN0_MB20_LENGTH) +#define bfin_write_CAN0_MB20_LENGTH(val) bfin_write16(CAN0_MB20_LENGTH, val) +#define bfin_read_CAN0_MB20_TIMESTAMP() bfin_read16(CAN0_MB20_TIMESTAMP) +#define bfin_write_CAN0_MB20_TIMESTAMP(val) bfin_write16(CAN0_MB20_TIMESTAMP, val) +#define bfin_read_CAN0_MB20_ID0() bfin_read16(CAN0_MB20_ID0) +#define bfin_write_CAN0_MB20_ID0(val) bfin_write16(CAN0_MB20_ID0, val) +#define bfin_read_CAN0_MB20_ID1() bfin_read16(CAN0_MB20_ID1) +#define bfin_write_CAN0_MB20_ID1(val) bfin_write16(CAN0_MB20_ID1, val) +#define bfin_read_CAN0_MB21_DATA0() bfin_read16(CAN0_MB21_DATA0) +#define bfin_write_CAN0_MB21_DATA0(val) bfin_write16(CAN0_MB21_DATA0, val) +#define bfin_read_CAN0_MB21_DATA1() bfin_read16(CAN0_MB21_DATA1) +#define bfin_write_CAN0_MB21_DATA1(val) bfin_write16(CAN0_MB21_DATA1, val) +#define bfin_read_CAN0_MB21_DATA2() bfin_read16(CAN0_MB21_DATA2) +#define bfin_write_CAN0_MB21_DATA2(val) bfin_write16(CAN0_MB21_DATA2, val) +#define bfin_read_CAN0_MB21_DATA3() bfin_read16(CAN0_MB21_DATA3) +#define bfin_write_CAN0_MB21_DATA3(val) bfin_write16(CAN0_MB21_DATA3, val) +#define bfin_read_CAN0_MB21_LENGTH() bfin_read16(CAN0_MB21_LENGTH) +#define bfin_write_CAN0_MB21_LENGTH(val) bfin_write16(CAN0_MB21_LENGTH, val) +#define bfin_read_CAN0_MB21_TIMESTAMP() bfin_read16(CAN0_MB21_TIMESTAMP) +#define bfin_write_CAN0_MB21_TIMESTAMP(val) bfin_write16(CAN0_MB21_TIMESTAMP, val) +#define bfin_read_CAN0_MB21_ID0() bfin_read16(CAN0_MB21_ID0) +#define bfin_write_CAN0_MB21_ID0(val) bfin_write16(CAN0_MB21_ID0, val) +#define bfin_read_CAN0_MB21_ID1() bfin_read16(CAN0_MB21_ID1) +#define bfin_write_CAN0_MB21_ID1(val) bfin_write16(CAN0_MB21_ID1, val) +#define bfin_read_CAN0_MB22_DATA0() bfin_read16(CAN0_MB22_DATA0) +#define bfin_write_CAN0_MB22_DATA0(val) bfin_write16(CAN0_MB22_DATA0, val) +#define bfin_read_CAN0_MB22_DATA1() bfin_read16(CAN0_MB22_DATA1) +#define bfin_write_CAN0_MB22_DATA1(val) bfin_write16(CAN0_MB22_DATA1, val) +#define bfin_read_CAN0_MB22_DATA2() bfin_read16(CAN0_MB22_DATA2) +#define bfin_write_CAN0_MB22_DATA2(val) bfin_write16(CAN0_MB22_DATA2, val) +#define bfin_read_CAN0_MB22_DATA3() bfin_read16(CAN0_MB22_DATA3) +#define bfin_write_CAN0_MB22_DATA3(val) bfin_write16(CAN0_MB22_DATA3, val) +#define bfin_read_CAN0_MB22_LENGTH() bfin_read16(CAN0_MB22_LENGTH) +#define bfin_write_CAN0_MB22_LENGTH(val) bfin_write16(CAN0_MB22_LENGTH, val) +#define bfin_read_CAN0_MB22_TIMESTAMP() bfin_read16(CAN0_MB22_TIMESTAMP) +#define bfin_write_CAN0_MB22_TIMESTAMP(val) bfin_write16(CAN0_MB22_TIMESTAMP, val) +#define bfin_read_CAN0_MB22_ID0() bfin_read16(CAN0_MB22_ID0) +#define bfin_write_CAN0_MB22_ID0(val) bfin_write16(CAN0_MB22_ID0, val) +#define bfin_read_CAN0_MB22_ID1() bfin_read16(CAN0_MB22_ID1) +#define bfin_write_CAN0_MB22_ID1(val) bfin_write16(CAN0_MB22_ID1, val) +#define bfin_read_CAN0_MB23_DATA0() bfin_read16(CAN0_MB23_DATA0) +#define bfin_write_CAN0_MB23_DATA0(val) bfin_write16(CAN0_MB23_DATA0, val) +#define bfin_read_CAN0_MB23_DATA1() bfin_read16(CAN0_MB23_DATA1) +#define bfin_write_CAN0_MB23_DATA1(val) bfin_write16(CAN0_MB23_DATA1, val) +#define bfin_read_CAN0_MB23_DATA2() bfin_read16(CAN0_MB23_DATA2) +#define bfin_write_CAN0_MB23_DATA2(val) bfin_write16(CAN0_MB23_DATA2, val) +#define bfin_read_CAN0_MB23_DATA3() bfin_read16(CAN0_MB23_DATA3) +#define bfin_write_CAN0_MB23_DATA3(val) bfin_write16(CAN0_MB23_DATA3, val) +#define bfin_read_CAN0_MB23_LENGTH() bfin_read16(CAN0_MB23_LENGTH) +#define bfin_write_CAN0_MB23_LENGTH(val) bfin_write16(CAN0_MB23_LENGTH, val) +#define bfin_read_CAN0_MB23_TIMESTAMP() bfin_read16(CAN0_MB23_TIMESTAMP) +#define bfin_write_CAN0_MB23_TIMESTAMP(val) bfin_write16(CAN0_MB23_TIMESTAMP, val) +#define bfin_read_CAN0_MB23_ID0() bfin_read16(CAN0_MB23_ID0) +#define bfin_write_CAN0_MB23_ID0(val) bfin_write16(CAN0_MB23_ID0, val) +#define bfin_read_CAN0_MB23_ID1() bfin_read16(CAN0_MB23_ID1) +#define bfin_write_CAN0_MB23_ID1(val) bfin_write16(CAN0_MB23_ID1, val) +#define bfin_read_CAN0_MB24_DATA0() bfin_read16(CAN0_MB24_DATA0) +#define bfin_write_CAN0_MB24_DATA0(val) bfin_write16(CAN0_MB24_DATA0, val) +#define bfin_read_CAN0_MB24_DATA1() bfin_read16(CAN0_MB24_DATA1) +#define bfin_write_CAN0_MB24_DATA1(val) bfin_write16(CAN0_MB24_DATA1, val) +#define bfin_read_CAN0_MB24_DATA2() bfin_read16(CAN0_MB24_DATA2) +#define bfin_write_CAN0_MB24_DATA2(val) bfin_write16(CAN0_MB24_DATA2, val) +#define bfin_read_CAN0_MB24_DATA3() bfin_read16(CAN0_MB24_DATA3) +#define bfin_write_CAN0_MB24_DATA3(val) bfin_write16(CAN0_MB24_DATA3, val) +#define bfin_read_CAN0_MB24_LENGTH() bfin_read16(CAN0_MB24_LENGTH) +#define bfin_write_CAN0_MB24_LENGTH(val) bfin_write16(CAN0_MB24_LENGTH, val) +#define bfin_read_CAN0_MB24_TIMESTAMP() bfin_read16(CAN0_MB24_TIMESTAMP) +#define bfin_write_CAN0_MB24_TIMESTAMP(val) bfin_write16(CAN0_MB24_TIMESTAMP, val) +#define bfin_read_CAN0_MB24_ID0() bfin_read16(CAN0_MB24_ID0) +#define bfin_write_CAN0_MB24_ID0(val) bfin_write16(CAN0_MB24_ID0, val) +#define bfin_read_CAN0_MB24_ID1() bfin_read16(CAN0_MB24_ID1) +#define bfin_write_CAN0_MB24_ID1(val) bfin_write16(CAN0_MB24_ID1, val) +#define bfin_read_CAN0_MB25_DATA0() bfin_read16(CAN0_MB25_DATA0) +#define bfin_write_CAN0_MB25_DATA0(val) bfin_write16(CAN0_MB25_DATA0, val) +#define bfin_read_CAN0_MB25_DATA1() bfin_read16(CAN0_MB25_DATA1) +#define bfin_write_CAN0_MB25_DATA1(val) bfin_write16(CAN0_MB25_DATA1, val) +#define bfin_read_CAN0_MB25_DATA2() bfin_read16(CAN0_MB25_DATA2) +#define bfin_write_CAN0_MB25_DATA2(val) bfin_write16(CAN0_MB25_DATA2, val) +#define bfin_read_CAN0_MB25_DATA3() bfin_read16(CAN0_MB25_DATA3) +#define bfin_write_CAN0_MB25_DATA3(val) bfin_write16(CAN0_MB25_DATA3, val) +#define bfin_read_CAN0_MB25_LENGTH() bfin_read16(CAN0_MB25_LENGTH) +#define bfin_write_CAN0_MB25_LENGTH(val) bfin_write16(CAN0_MB25_LENGTH, val) +#define bfin_read_CAN0_MB25_TIMESTAMP() bfin_read16(CAN0_MB25_TIMESTAMP) +#define bfin_write_CAN0_MB25_TIMESTAMP(val) bfin_write16(CAN0_MB25_TIMESTAMP, val) +#define bfin_read_CAN0_MB25_ID0() bfin_read16(CAN0_MB25_ID0) +#define bfin_write_CAN0_MB25_ID0(val) bfin_write16(CAN0_MB25_ID0, val) +#define bfin_read_CAN0_MB25_ID1() bfin_read16(CAN0_MB25_ID1) +#define bfin_write_CAN0_MB25_ID1(val) bfin_write16(CAN0_MB25_ID1, val) +#define bfin_read_CAN0_MB26_DATA0() bfin_read16(CAN0_MB26_DATA0) +#define bfin_write_CAN0_MB26_DATA0(val) bfin_write16(CAN0_MB26_DATA0, val) +#define bfin_read_CAN0_MB26_DATA1() bfin_read16(CAN0_MB26_DATA1) +#define bfin_write_CAN0_MB26_DATA1(val) bfin_write16(CAN0_MB26_DATA1, val) +#define bfin_read_CAN0_MB26_DATA2() bfin_read16(CAN0_MB26_DATA2) +#define bfin_write_CAN0_MB26_DATA2(val) bfin_write16(CAN0_MB26_DATA2, val) +#define bfin_read_CAN0_MB26_DATA3() bfin_read16(CAN0_MB26_DATA3) +#define bfin_write_CAN0_MB26_DATA3(val) bfin_write16(CAN0_MB26_DATA3, val) +#define bfin_read_CAN0_MB26_LENGTH() bfin_read16(CAN0_MB26_LENGTH) +#define bfin_write_CAN0_MB26_LENGTH(val) bfin_write16(CAN0_MB26_LENGTH, val) +#define bfin_read_CAN0_MB26_TIMESTAMP() bfin_read16(CAN0_MB26_TIMESTAMP) +#define bfin_write_CAN0_MB26_TIMESTAMP(val) bfin_write16(CAN0_MB26_TIMESTAMP, val) +#define bfin_read_CAN0_MB26_ID0() bfin_read16(CAN0_MB26_ID0) +#define bfin_write_CAN0_MB26_ID0(val) bfin_write16(CAN0_MB26_ID0, val) +#define bfin_read_CAN0_MB26_ID1() bfin_read16(CAN0_MB26_ID1) +#define bfin_write_CAN0_MB26_ID1(val) bfin_write16(CAN0_MB26_ID1, val) +#define bfin_read_CAN0_MB27_DATA0() bfin_read16(CAN0_MB27_DATA0) +#define bfin_write_CAN0_MB27_DATA0(val) bfin_write16(CAN0_MB27_DATA0, val) +#define bfin_read_CAN0_MB27_DATA1() bfin_read16(CAN0_MB27_DATA1) +#define bfin_write_CAN0_MB27_DATA1(val) bfin_write16(CAN0_MB27_DATA1, val) +#define bfin_read_CAN0_MB27_DATA2() bfin_read16(CAN0_MB27_DATA2) +#define bfin_write_CAN0_MB27_DATA2(val) bfin_write16(CAN0_MB27_DATA2, val) +#define bfin_read_CAN0_MB27_DATA3() bfin_read16(CAN0_MB27_DATA3) +#define bfin_write_CAN0_MB27_DATA3(val) bfin_write16(CAN0_MB27_DATA3, val) +#define bfin_read_CAN0_MB27_LENGTH() bfin_read16(CAN0_MB27_LENGTH) +#define bfin_write_CAN0_MB27_LENGTH(val) bfin_write16(CAN0_MB27_LENGTH, val) +#define bfin_read_CAN0_MB27_TIMESTAMP() bfin_read16(CAN0_MB27_TIMESTAMP) +#define bfin_write_CAN0_MB27_TIMESTAMP(val) bfin_write16(CAN0_MB27_TIMESTAMP, val) +#define bfin_read_CAN0_MB27_ID0() bfin_read16(CAN0_MB27_ID0) +#define bfin_write_CAN0_MB27_ID0(val) bfin_write16(CAN0_MB27_ID0, val) +#define bfin_read_CAN0_MB27_ID1() bfin_read16(CAN0_MB27_ID1) +#define bfin_write_CAN0_MB27_ID1(val) bfin_write16(CAN0_MB27_ID1, val) +#define bfin_read_CAN0_MB28_DATA0() bfin_read16(CAN0_MB28_DATA0) +#define bfin_write_CAN0_MB28_DATA0(val) bfin_write16(CAN0_MB28_DATA0, val) +#define bfin_read_CAN0_MB28_DATA1() bfin_read16(CAN0_MB28_DATA1) +#define bfin_write_CAN0_MB28_DATA1(val) bfin_write16(CAN0_MB28_DATA1, val) +#define bfin_read_CAN0_MB28_DATA2() bfin_read16(CAN0_MB28_DATA2) +#define bfin_write_CAN0_MB28_DATA2(val) bfin_write16(CAN0_MB28_DATA2, val) +#define bfin_read_CAN0_MB28_DATA3() bfin_read16(CAN0_MB28_DATA3) +#define bfin_write_CAN0_MB28_DATA3(val) bfin_write16(CAN0_MB28_DATA3, val) +#define bfin_read_CAN0_MB28_LENGTH() bfin_read16(CAN0_MB28_LENGTH) +#define bfin_write_CAN0_MB28_LENGTH(val) bfin_write16(CAN0_MB28_LENGTH, val) +#define bfin_read_CAN0_MB28_TIMESTAMP() bfin_read16(CAN0_MB28_TIMESTAMP) +#define bfin_write_CAN0_MB28_TIMESTAMP(val) bfin_write16(CAN0_MB28_TIMESTAMP, val) +#define bfin_read_CAN0_MB28_ID0() bfin_read16(CAN0_MB28_ID0) +#define bfin_write_CAN0_MB28_ID0(val) bfin_write16(CAN0_MB28_ID0, val) +#define bfin_read_CAN0_MB28_ID1() bfin_read16(CAN0_MB28_ID1) +#define bfin_write_CAN0_MB28_ID1(val) bfin_write16(CAN0_MB28_ID1, val) +#define bfin_read_CAN0_MB29_DATA0() bfin_read16(CAN0_MB29_DATA0) +#define bfin_write_CAN0_MB29_DATA0(val) bfin_write16(CAN0_MB29_DATA0, val) +#define bfin_read_CAN0_MB29_DATA1() bfin_read16(CAN0_MB29_DATA1) +#define bfin_write_CAN0_MB29_DATA1(val) bfin_write16(CAN0_MB29_DATA1, val) +#define bfin_read_CAN0_MB29_DATA2() bfin_read16(CAN0_MB29_DATA2) +#define bfin_write_CAN0_MB29_DATA2(val) bfin_write16(CAN0_MB29_DATA2, val) +#define bfin_read_CAN0_MB29_DATA3() bfin_read16(CAN0_MB29_DATA3) +#define bfin_write_CAN0_MB29_DATA3(val) bfin_write16(CAN0_MB29_DATA3, val) +#define bfin_read_CAN0_MB29_LENGTH() bfin_read16(CAN0_MB29_LENGTH) +#define bfin_write_CAN0_MB29_LENGTH(val) bfin_write16(CAN0_MB29_LENGTH, val) +#define bfin_read_CAN0_MB29_TIMESTAMP() bfin_read16(CAN0_MB29_TIMESTAMP) +#define bfin_write_CAN0_MB29_TIMESTAMP(val) bfin_write16(CAN0_MB29_TIMESTAMP, val) +#define bfin_read_CAN0_MB29_ID0() bfin_read16(CAN0_MB29_ID0) +#define bfin_write_CAN0_MB29_ID0(val) bfin_write16(CAN0_MB29_ID0, val) +#define bfin_read_CAN0_MB29_ID1() bfin_read16(CAN0_MB29_ID1) +#define bfin_write_CAN0_MB29_ID1(val) bfin_write16(CAN0_MB29_ID1, val) +#define bfin_read_CAN0_MB30_DATA0() bfin_read16(CAN0_MB30_DATA0) +#define bfin_write_CAN0_MB30_DATA0(val) bfin_write16(CAN0_MB30_DATA0, val) +#define bfin_read_CAN0_MB30_DATA1() bfin_read16(CAN0_MB30_DATA1) +#define bfin_write_CAN0_MB30_DATA1(val) bfin_write16(CAN0_MB30_DATA1, val) +#define bfin_read_CAN0_MB30_DATA2() bfin_read16(CAN0_MB30_DATA2) +#define bfin_write_CAN0_MB30_DATA2(val) bfin_write16(CAN0_MB30_DATA2, val) +#define bfin_read_CAN0_MB30_DATA3() bfin_read16(CAN0_MB30_DATA3) +#define bfin_write_CAN0_MB30_DATA3(val) bfin_write16(CAN0_MB30_DATA3, val) +#define bfin_read_CAN0_MB30_LENGTH() bfin_read16(CAN0_MB30_LENGTH) +#define bfin_write_CAN0_MB30_LENGTH(val) bfin_write16(CAN0_MB30_LENGTH, val) +#define bfin_read_CAN0_MB30_TIMESTAMP() bfin_read16(CAN0_MB30_TIMESTAMP) +#define bfin_write_CAN0_MB30_TIMESTAMP(val) bfin_write16(CAN0_MB30_TIMESTAMP, val) +#define bfin_read_CAN0_MB30_ID0() bfin_read16(CAN0_MB30_ID0) +#define bfin_write_CAN0_MB30_ID0(val) bfin_write16(CAN0_MB30_ID0, val) +#define bfin_read_CAN0_MB30_ID1() bfin_read16(CAN0_MB30_ID1) +#define bfin_write_CAN0_MB30_ID1(val) bfin_write16(CAN0_MB30_ID1, val) +#define bfin_read_CAN0_MB31_DATA0() bfin_read16(CAN0_MB31_DATA0) +#define bfin_write_CAN0_MB31_DATA0(val) bfin_write16(CAN0_MB31_DATA0, val) +#define bfin_read_CAN0_MB31_DATA1() bfin_read16(CAN0_MB31_DATA1) +#define bfin_write_CAN0_MB31_DATA1(val) bfin_write16(CAN0_MB31_DATA1, val) +#define bfin_read_CAN0_MB31_DATA2() bfin_read16(CAN0_MB31_DATA2) +#define bfin_write_CAN0_MB31_DATA2(val) bfin_write16(CAN0_MB31_DATA2, val) +#define bfin_read_CAN0_MB31_DATA3() bfin_read16(CAN0_MB31_DATA3) +#define bfin_write_CAN0_MB31_DATA3(val) bfin_write16(CAN0_MB31_DATA3, val) +#define bfin_read_CAN0_MB31_LENGTH() bfin_read16(CAN0_MB31_LENGTH) +#define bfin_write_CAN0_MB31_LENGTH(val) bfin_write16(CAN0_MB31_LENGTH, val) +#define bfin_read_CAN0_MB31_TIMESTAMP() bfin_read16(CAN0_MB31_TIMESTAMP) +#define bfin_write_CAN0_MB31_TIMESTAMP(val) bfin_write16(CAN0_MB31_TIMESTAMP, val) +#define bfin_read_CAN0_MB31_ID0() bfin_read16(CAN0_MB31_ID0) +#define bfin_write_CAN0_MB31_ID0(val) bfin_write16(CAN0_MB31_ID0, val) +#define bfin_read_CAN0_MB31_ID1() bfin_read16(CAN0_MB31_ID1) +#define bfin_write_CAN0_MB31_ID1(val) bfin_write16(CAN0_MB31_ID1, val) + +/* UART3 Registers */ + +#define bfin_read_UART3_DLL() bfin_read16(UART3_DLL) +#define bfin_write_UART3_DLL(val) bfin_write16(UART3_DLL, val) +#define bfin_read_UART3_DLH() bfin_read16(UART3_DLH) +#define bfin_write_UART3_DLH(val) bfin_write16(UART3_DLH, val) +#define bfin_read_UART3_GCTL() bfin_read16(UART3_GCTL) +#define bfin_write_UART3_GCTL(val) bfin_write16(UART3_GCTL, val) +#define bfin_read_UART3_LCR() bfin_read16(UART3_LCR) +#define bfin_write_UART3_LCR(val) bfin_write16(UART3_LCR, val) +#define bfin_read_UART3_MCR() bfin_read16(UART3_MCR) +#define bfin_write_UART3_MCR(val) bfin_write16(UART3_MCR, val) +#define bfin_read_UART3_LSR() bfin_read16(UART3_LSR) +#define bfin_write_UART3_LSR(val) bfin_write16(UART3_LSR, val) +#define bfin_read_UART3_MSR() bfin_read16(UART3_MSR) +#define bfin_write_UART3_MSR(val) bfin_write16(UART3_MSR, val) +#define bfin_read_UART3_SCR() bfin_read16(UART3_SCR) +#define bfin_write_UART3_SCR(val) bfin_write16(UART3_SCR, val) +#define bfin_read_UART3_IER_SET() bfin_read16(UART3_IER_SET) +#define bfin_write_UART3_IER_SET(val) bfin_write16(UART3_IER_SET, val) +#define bfin_read_UART3_IER_CLEAR() bfin_read16(UART3_IER_CLEAR) +#define bfin_write_UART3_IER_CLEAR(val) bfin_write16(UART3_IER_CLEAR, val) +#define bfin_read_UART3_THR() bfin_read16(UART3_THR) +#define bfin_write_UART3_THR(val) bfin_write16(UART3_THR, val) +#define bfin_read_UART3_RBR() bfin_read16(UART3_RBR) +#define bfin_write_UART3_RBR(val) bfin_write16(UART3_RBR, val) + +/* NFC Registers */ + +#define bfin_read_NFC_CTL() bfin_read16(NFC_CTL) +#define bfin_write_NFC_CTL(val) bfin_write16(NFC_CTL, val) +#define bfin_read_NFC_STAT() bfin_read16(NFC_STAT) +#define bfin_write_NFC_STAT(val) bfin_write16(NFC_STAT, val) +#define bfin_read_NFC_IRQSTAT() bfin_read16(NFC_IRQSTAT) +#define bfin_write_NFC_IRQSTAT(val) bfin_write16(NFC_IRQSTAT, val) +#define bfin_read_NFC_IRQMASK() bfin_read16(NFC_IRQMASK) +#define bfin_write_NFC_IRQMASK(val) bfin_write16(NFC_IRQMASK, val) +#define bfin_read_NFC_ECC0() bfin_read16(NFC_ECC0) +#define bfin_write_NFC_ECC0(val) bfin_write16(NFC_ECC0, val) +#define bfin_read_NFC_ECC1() bfin_read16(NFC_ECC1) +#define bfin_write_NFC_ECC1(val) bfin_write16(NFC_ECC1, val) +#define bfin_read_NFC_ECC2() bfin_read16(NFC_ECC2) +#define bfin_write_NFC_ECC2(val) bfin_write16(NFC_ECC2, val) +#define bfin_read_NFC_ECC3() bfin_read16(NFC_ECC3) +#define bfin_write_NFC_ECC3(val) bfin_write16(NFC_ECC3, val) +#define bfin_read_NFC_COUNT() bfin_read16(NFC_COUNT) +#define bfin_write_NFC_COUNT(val) bfin_write16(NFC_COUNT, val) +#define bfin_read_NFC_RST() bfin_read16(NFC_RST) +#define bfin_write_NFC_RST(val) bfin_write16(NFC_RST, val) +#define bfin_read_NFC_PGCTL() bfin_read16(NFC_PGCTL) +#define bfin_write_NFC_PGCTL(val) bfin_write16(NFC_PGCTL, val) +#define bfin_read_NFC_READ() bfin_read16(NFC_READ) +#define bfin_write_NFC_READ(val) bfin_write16(NFC_READ, val) +#define bfin_read_NFC_ADDR() bfin_read16(NFC_ADDR) +#define bfin_write_NFC_ADDR(val) bfin_write16(NFC_ADDR, val) +#define bfin_read_NFC_CMD() bfin_read16(NFC_CMD) +#define bfin_write_NFC_CMD(val) bfin_write16(NFC_CMD, val) +#define bfin_read_NFC_DATA_WR() bfin_read16(NFC_DATA_WR) +#define bfin_write_NFC_DATA_WR(val) bfin_write16(NFC_DATA_WR, val) +#define bfin_read_NFC_DATA_RD() bfin_read16(NFC_DATA_RD) +#define bfin_write_NFC_DATA_RD(val) bfin_write16(NFC_DATA_RD, val) + +/* Counter Registers */ + +#define bfin_read_CNT_CONFIG() bfin_read16(CNT_CONFIG) +#define bfin_write_CNT_CONFIG(val) bfin_write16(CNT_CONFIG, val) +#define bfin_read_CNT_IMASK() bfin_read16(CNT_IMASK) +#define bfin_write_CNT_IMASK(val) bfin_write16(CNT_IMASK, val) +#define bfin_read_CNT_STATUS() bfin_read16(CNT_STATUS) +#define bfin_write_CNT_STATUS(val) bfin_write16(CNT_STATUS, val) +#define bfin_read_CNT_COMMAND() bfin_read16(CNT_COMMAND) +#define bfin_write_CNT_COMMAND(val) bfin_write16(CNT_COMMAND, val) +#define bfin_read_CNT_DEBOUNCE() bfin_read16(CNT_DEBOUNCE) +#define bfin_write_CNT_DEBOUNCE(val) bfin_write16(CNT_DEBOUNCE, val) +#define bfin_read_CNT_COUNTER() bfin_read32(CNT_COUNTER) +#define bfin_write_CNT_COUNTER(val) bfin_write32(CNT_COUNTER, val) +#define bfin_read_CNT_MAX() bfin_read32(CNT_MAX) +#define bfin_write_CNT_MAX(val) bfin_write32(CNT_MAX, val) +#define bfin_read_CNT_MIN() bfin_read32(CNT_MIN) +#define bfin_write_CNT_MIN(val) bfin_write32(CNT_MIN, val) + +/* OTP/FUSE Registers */ + +#define bfin_read_OTP_CONTROL() bfin_read16(OTP_CONTROL) +#define bfin_write_OTP_CONTROL(val) bfin_write16(OTP_CONTROL, val) +#define bfin_read_OTP_BEN() bfin_read16(OTP_BEN) +#define bfin_write_OTP_BEN(val) bfin_write16(OTP_BEN, val) +#define bfin_read_OTP_STATUS() bfin_read16(OTP_STATUS) +#define bfin_write_OTP_STATUS(val) bfin_write16(OTP_STATUS, val) +#define bfin_read_OTP_TIMING() bfin_read32(OTP_TIMING) +#define bfin_write_OTP_TIMING(val) bfin_write32(OTP_TIMING, val) + +/* Security Registers */ + +#define bfin_read_SECURE_SYSSWT() bfin_read32(SECURE_SYSSWT) +#define bfin_write_SECURE_SYSSWT(val) bfin_write32(SECURE_SYSSWT, val) +#define bfin_read_SECURE_CONTROL() bfin_read16(SECURE_CONTROL) +#define bfin_write_SECURE_CONTROL(val) bfin_write16(SECURE_CONTROL, val) +#define bfin_read_SECURE_STATUS() bfin_read16(SECURE_STATUS) +#define bfin_write_SECURE_STATUS(val) bfin_write16(SECURE_STATUS, val) + +/* DMA Peribfin_read_()heral Mux Register */ + +#define bfin_read_DMAC1_PERIMUX() bfin_read16(DMAC1_PERIMUX) +#define bfin_write_DMAC1_PERIMUX(val) bfin_write16(DMAC1_PERIMUX, val) + +/* OTP Read/Write Data Buffer Registers */ + +#define bfin_read_OTP_DATA0() bfin_read32(OTP_DATA0) +#define bfin_write_OTP_DATA0(val) bfin_write32(OTP_DATA0, val) +#define bfin_read_OTP_DATA1() bfin_read32(OTP_DATA1) +#define bfin_write_OTP_DATA1(val) bfin_write32(OTP_DATA1, val) +#define bfin_read_OTP_DATA2() bfin_read32(OTP_DATA2) +#define bfin_write_OTP_DATA2(val) bfin_write32(OTP_DATA2, val) +#define bfin_read_OTP_DATA3() bfin_read32(OTP_DATA3) +#define bfin_write_OTP_DATA3(val) bfin_write32(OTP_DATA3, val) + +/* Handshake MDMA is not defined in the shared file because it is not available on the ADSP-BF542 bfin_read_()rocessor */ + +/* legacy definitions */ +#define bfin_read_EBIU_AMCBCTL0 bfin_read_EBIU_AMBCTL0 +#define bfin_write_EBIU_AMCBCTL0 bfin_write_EBIU_AMBCTL0 +#define bfin_read_EBIU_AMCBCTL1 bfin_read_EBIU_AMBCTL1 +#define bfin_write_EBIU_AMCBCTL1 bfin_write_EBIU_AMBCTL1 +#define bfin_read_PINT0_IRQ bfin_read_PINT0_REQUEST +#define bfin_write_PINT0_IRQ bfin_write_PINT0_REQUEST +#define bfin_read_PINT1_IRQ bfin_read_PINT1_REQUEST +#define bfin_write_PINT1_IRQ bfin_write_PINT1_REQUEST +#define bfin_read_PINT2_IRQ bfin_read_PINT2_REQUEST +#define bfin_write_PINT2_IRQ bfin_write_PINT2_REQUEST +#define bfin_read_PINT3_IRQ bfin_read_PINT3_REQUEST +#define bfin_write_PINT3_IRQ bfin_write_PINT3_REQUEST + +#endif /* _CDEF_BF54X_H */ + diff --git a/include/asm-blackfin/mach-bf548/defBF542.h b/include/asm-blackfin/mach-bf548/defBF542.h new file mode 100644 index 00000000000000..ac968fca5cc549 --- /dev/null +++ b/include/asm-blackfin/mach-bf548/defBF542.h @@ -0,0 +1,1206 @@ +/* + * File: include/asm-blackfin/mach-bf548/defBF542.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _DEF_BF542_H +#define _DEF_BF542_H + +/* Include all Core registers and bit definitions */ +#include <asm/mach-common/def_LPBlackfin.h> + +/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF542 */ + +/* Include defBF54x_base.h for the set of #defines that are common to all ADSP-BF54x processors */ +#include "defBF54x_base.h" + +/* The following are the #defines needed by ADSP-BF542 that are not in the common header */ + +/* ATAPI Registers */ + +#define ATAPI_CONTROL 0xffc03800 /* ATAPI Control Register */ +#define ATAPI_STATUS 0xffc03804 /* ATAPI Status Register */ +#define ATAPI_DEV_ADDR 0xffc03808 /* ATAPI Device Register Address */ +#define ATAPI_DEV_TXBUF 0xffc0380c /* ATAPI Device Register Write Data */ +#define ATAPI_DEV_RXBUF 0xffc03810 /* ATAPI Device Register Read Data */ +#define ATAPI_INT_MASK 0xffc03814 /* ATAPI Interrupt Mask Register */ +#define ATAPI_INT_STATUS 0xffc03818 /* ATAPI Interrupt Status Register */ +#define ATAPI_XFER_LEN 0xffc0381c /* ATAPI Length of Transfer */ +#define ATAPI_LINE_STATUS 0xffc03820 /* ATAPI Line Status */ +#define ATAPI_SM_STATE 0xffc03824 /* ATAPI State Machine Status */ +#define ATAPI_TERMINATE 0xffc03828 /* ATAPI Host Terminate */ +#define ATAPI_PIO_TFRCNT 0xffc0382c /* ATAPI PIO mode transfer count */ +#define ATAPI_DMA_TFRCNT 0xffc03830 /* ATAPI DMA mode transfer count */ +#define ATAPI_UMAIN_TFRCNT 0xffc03834 /* ATAPI UDMAIN transfer count */ +#define ATAPI_UDMAOUT_TFRCNT 0xffc03838 /* ATAPI UDMAOUT transfer count */ +#define ATAPI_REG_TIM_0 0xffc03840 /* ATAPI Register Transfer Timing 0 */ +#define ATAPI_PIO_TIM_0 0xffc03844 /* ATAPI PIO Timing 0 Register */ +#define ATAPI_PIO_TIM_1 0xffc03848 /* ATAPI PIO Timing 1 Register */ +#define ATAPI_MULTI_TIM_0 0xffc03850 /* ATAPI Multi-DMA Timing 0 Register */ +#define ATAPI_MULTI_TIM_1 0xffc03854 /* ATAPI Multi-DMA Timing 1 Register */ +#define ATAPI_MULTI_TIM_2 0xffc03858 /* ATAPI Multi-DMA Timing 2 Register */ +#define ATAPI_ULTRA_TIM_0 0xffc03860 /* ATAPI Ultra-DMA Timing 0 Register */ +#define ATAPI_ULTRA_TIM_1 0xffc03864 /* ATAPI Ultra-DMA Timing 1 Register */ +#define ATAPI_ULTRA_TIM_2 0xffc03868 /* ATAPI Ultra-DMA Timing 2 Register */ +#define ATAPI_ULTRA_TIM_3 0xffc0386c /* ATAPI Ultra-DMA Timing 3 Register */ + +/* SDH Registers */ + +#define SDH_PWR_CTL 0xffc03900 /* SDH Power Control */ +#define SDH_CLK_CTL 0xffc03904 /* SDH Clock Control */ +#define SDH_ARGUMENT 0xffc03908 /* SDH Argument */ +#define SDH_COMMAND 0xffc0390c /* SDH Command */ +#define SDH_RESP_CMD 0xffc03910 /* SDH Response Command */ +#define SDH_RESPONSE0 0xffc03914 /* SDH Response0 */ +#define SDH_RESPONSE1 0xffc03918 /* SDH Response1 */ +#define SDH_RESPONSE2 0xffc0391c /* SDH Response2 */ +#define SDH_RESPONSE3 0xffc03920 /* SDH Response3 */ +#define SDH_DATA_TIMER 0xffc03924 /* SDH Data Timer */ +#define SDH_DATA_LGTH 0xffc03928 /* SDH Data Length */ +#define SDH_DATA_CTL 0xffc0392c /* SDH Data Control */ +#define SDH_DATA_CNT 0xffc03930 /* SDH Data Counter */ +#define SDH_STATUS 0xffc03934 /* SDH Status */ +#define SDH_STATUS_CLR 0xffc03938 /* SDH Status Clear */ +#define SDH_MASK0 0xffc0393c /* SDH Interrupt0 Mask */ +#define SDH_MASK1 0xffc03940 /* SDH Interrupt1 Mask */ +#define SDH_FIFO_CNT 0xffc03948 /* SDH FIFO Counter */ +#define SDH_FIFO 0xffc03980 /* SDH Data FIFO */ +#define SDH_E_STATUS 0xffc039c0 /* SDH Exception Status */ +#define SDH_E_MASK 0xffc039c4 /* SDH Exception Mask */ +#define SDH_CFG 0xffc039c8 /* SDH Configuration */ +#define SDH_RD_WAIT_EN 0xffc039cc /* SDH Read Wait Enable */ +#define SDH_PID0 0xffc039d0 /* SDH Peripheral Identification0 */ +#define SDH_PID1 0xffc039d4 /* SDH Peripheral Identification1 */ +#define SDH_PID2 0xffc039d8 /* SDH Peripheral Identification2 */ +#define SDH_PID3 0xffc039dc /* SDH Peripheral Identification3 */ +#define SDH_PID4 0xffc039e0 /* SDH Peripheral Identification4 */ +#define SDH_PID5 0xffc039e4 /* SDH Peripheral Identification5 */ +#define SDH_PID6 0xffc039e8 /* SDH Peripheral Identification6 */ +#define SDH_PID7 0xffc039ec /* SDH Peripheral Identification7 */ + +/* USB Control Registers */ + +#define USB_FADDR 0xffc03c00 /* Function address register */ +#define USB_POWER 0xffc03c04 /* Power management register */ +#define USB_INTRTX 0xffc03c08 /* Interrupt register for endpoint 0 and Tx endpoint 1 to 7 */ +#define USB_INTRRX 0xffc03c0c /* Interrupt register for Rx endpoints 1 to 7 */ +#define USB_INTRTXE 0xffc03c10 /* Interrupt enable register for IntrTx */ +#define USB_INTRRXE 0xffc03c14 /* Interrupt enable register for IntrRx */ +#define USB_INTRUSB 0xffc03c18 /* Interrupt register for common USB interrupts */ +#define USB_INTRUSBE 0xffc03c1c /* Interrupt enable register for IntrUSB */ +#define USB_FRAME 0xffc03c20 /* USB frame number */ +#define USB_INDEX 0xffc03c24 /* Index register for selecting the indexed endpoint registers */ +#define USB_TESTMODE 0xffc03c28 /* Enabled USB 20 test modes */ +#define USB_GLOBINTR 0xffc03c2c /* Global Interrupt Mask register and Wakeup Exception Interrupt */ +#define USB_GLOBAL_CTL 0xffc03c30 /* Global Clock Control for the core */ + +/* USB Packet Control Registers */ + +#define USB_TX_MAX_PACKET 0xffc03c40 /* Maximum packet size for Host Tx endpoint */ +#define USB_CSR0 0xffc03c44 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */ +#define USB_TXCSR 0xffc03c44 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */ +#define USB_RX_MAX_PACKET 0xffc03c48 /* Maximum packet size for Host Rx endpoint */ +#define USB_RXCSR 0xffc03c4c /* Control Status register for Host Rx endpoint */ +#define USB_COUNT0 0xffc03c50 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */ +#define USB_RXCOUNT 0xffc03c50 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */ +#define USB_TXTYPE 0xffc03c54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint */ +#define USB_NAKLIMIT0 0xffc03c58 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */ +#define USB_TXINTERVAL 0xffc03c58 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */ +#define USB_RXTYPE 0xffc03c5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint */ +#define USB_RXINTERVAL 0xffc03c60 /* Sets the polling interval for Interrupt and Isochronous transfers or the NAK response timeout on Bulk transfers */ +#define USB_TXCOUNT 0xffc03c68 /* Number of bytes to be written to the selected endpoint Tx FIFO */ + +/* USB Endpoint FIFO Registers */ + +#define USB_EP0_FIFO 0xffc03c80 /* Endpoint 0 FIFO */ +#define USB_EP1_FIFO 0xffc03c88 /* Endpoint 1 FIFO */ +#define USB_EP2_FIFO 0xffc03c90 /* Endpoint 2 FIFO */ +#define USB_EP3_FIFO 0xffc03c98 /* Endpoint 3 FIFO */ +#define USB_EP4_FIFO 0xffc03ca0 /* Endpoint 4 FIFO */ +#define USB_EP5_FIFO 0xffc03ca8 /* Endpoint 5 FIFO */ +#define USB_EP6_FIFO 0xffc03cb0 /* Endpoint 6 FIFO */ +#define USB_EP7_FIFO 0xffc03cb8 /* Endpoint 7 FIFO */ + +/* USB OTG Control Registers */ + +#define USB_OTG_DEV_CTL 0xffc03d00 /* OTG Device Control Register */ +#define USB_OTG_VBUS_IRQ 0xffc03d04 /* OTG VBUS Control Interrupts */ +#define USB_OTG_VBUS_MASK 0xffc03d08 /* VBUS Control Interrupt Enable */ + +/* USB Phy Control Registers */ + +#define USB_LINKINFO 0xffc03d48 /* Enables programming of some PHY-side delays */ +#define USB_VPLEN 0xffc03d4c /* Determines duration of VBUS pulse for VBUS charging */ +#define USB_HS_EOF1 0xffc03d50 /* Time buffer for High-Speed transactions */ +#define USB_FS_EOF1 0xffc03d54 /* Time buffer for Full-Speed transactions */ +#define USB_LS_EOF1 0xffc03d58 /* Time buffer for Low-Speed transactions */ + +/* (APHY_CNTRL is for ADI usage only) */ + +#define USB_APHY_CNTRL 0xffc03de0 /* Register that increases visibility of Analog PHY */ + +/* (APHY_CALIB is for ADI usage only) */ + +#define USB_APHY_CALIB 0xffc03de4 /* Register used to set some calibration values */ +#define USB_APHY_CNTRL2 0xffc03de8 /* Register used to prevent re-enumeration once Moab goes into hibernate mode */ + +/* (PHY_TEST is for ADI usage only) */ + +#define USB_PHY_TEST 0xffc03dec /* Used for reducing simulation time and simplifies FIFO testability */ +#define USB_PLLOSC_CTRL 0xffc03df0 /* Used to program different parameters for USB PLL and Oscillator */ +#define USB_SRP_CLKDIV 0xffc03df4 /* Used to program clock divide value for the clock fed to the SRP detection logic */ + +/* USB Endpoint 0 Control Registers */ + +#define USB_EP_NI0_TXMAXP 0xffc03e00 /* Maximum packet size for Host Tx endpoint0 */ +#define USB_EP_NI0_TXCSR 0xffc03e04 /* Control Status register for endpoint 0 */ +#define USB_EP_NI0_RXMAXP 0xffc03e08 /* Maximum packet size for Host Rx endpoint0 */ +#define USB_EP_NI0_RXCSR 0xffc03e0c /* Control Status register for Host Rx endpoint0 */ +#define USB_EP_NI0_RXCOUNT 0xffc03e10 /* Number of bytes received in endpoint 0 FIFO */ +#define USB_EP_NI0_TXTYPE 0xffc03e14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint0 */ +#define USB_EP_NI0_TXINTERVAL 0xffc03e18 /* Sets the NAK response timeout on Endpoint 0 */ +#define USB_EP_NI0_RXTYPE 0xffc03e1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint0 */ +#define USB_EP_NI0_RXINTERVAL 0xffc03e20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint0 */ + +/* USB Endpoint 1 Control Registers */ + +#define USB_EP_NI0_TXCOUNT 0xffc03e28 /* Number of bytes to be written to the endpoint0 Tx FIFO */ +#define USB_EP_NI1_TXMAXP 0xffc03e40 /* Maximum packet size for Host Tx endpoint1 */ +#define USB_EP_NI1_TXCSR 0xffc03e44 /* Control Status register for endpoint1 */ +#define USB_EP_NI1_RXMAXP 0xffc03e48 /* Maximum packet size for Host Rx endpoint1 */ +#define USB_EP_NI1_RXCSR 0xffc03e4c /* Control Status register for Host Rx endpoint1 */ +#define USB_EP_NI1_RXCOUNT 0xffc03e50 /* Number of bytes received in endpoint1 FIFO */ +#define USB_EP_NI1_TXTYPE 0xffc03e54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint1 */ +#define USB_EP_NI1_TXINTERVAL 0xffc03e58 /* Sets the NAK response timeout on Endpoint1 */ +#define USB_EP_NI1_RXTYPE 0xffc03e5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint1 */ +#define USB_EP_NI1_RXINTERVAL 0xffc03e60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint1 */ + +/* USB Endpoint 2 Control Registers */ + +#define USB_EP_NI1_TXCOUNT 0xffc03e68 /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */ +#define USB_EP_NI2_TXMAXP 0xffc03e80 /* Maximum packet size for Host Tx endpoint2 */ +#define USB_EP_NI2_TXCSR 0xffc03e84 /* Control Status register for endpoint2 */ +#define USB_EP_NI2_RXMAXP 0xffc03e88 /* Maximum packet size for Host Rx endpoint2 */ +#define USB_EP_NI2_RXCSR 0xffc03e8c /* Control Status register for Host Rx endpoint2 */ +#define USB_EP_NI2_RXCOUNT 0xffc03e90 /* Number of bytes received in endpoint2 FIFO */ +#define USB_EP_NI2_TXTYPE 0xffc03e94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint2 */ +#define USB_EP_NI2_TXINTERVAL 0xffc03e98 /* Sets the NAK response timeout on Endpoint2 */ +#define USB_EP_NI2_RXTYPE 0xffc03e9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint2 */ +#define USB_EP_NI2_RXINTERVAL 0xffc03ea0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint2 */ + +/* USB Endpoint 3 Control Registers */ + +#define USB_EP_NI2_TXCOUNT 0xffc03ea8 /* Number of bytes to be written to the endpoint2 Tx FIFO */ +#define USB_EP_NI3_TXMAXP 0xffc03ec0 /* Maximum packet size for Host Tx endpoint3 */ +#define USB_EP_NI3_TXCSR 0xffc03ec4 /* Control Status register for endpoint3 */ +#define USB_EP_NI3_RXMAXP 0xffc03ec8 /* Maximum packet size for Host Rx endpoint3 */ +#define USB_EP_NI3_RXCSR 0xffc03ecc /* Control Status register for Host Rx endpoint3 */ +#define USB_EP_NI3_RXCOUNT 0xffc03ed0 /* Number of bytes received in endpoint3 FIFO */ +#define USB_EP_NI3_TXTYPE 0xffc03ed4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint3 */ +#define USB_EP_NI3_TXINTERVAL 0xffc03ed8 /* Sets the NAK response timeout on Endpoint3 */ +#define USB_EP_NI3_RXTYPE 0xffc03edc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint3 */ +#define USB_EP_NI3_RXINTERVAL 0xffc03ee0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint3 */ + +/* USB Endpoint 4 Control Registers */ + +#define USB_EP_NI3_TXCOUNT 0xffc03ee8 /* Number of bytes to be written to the H124endpoint3 Tx FIFO */ +#define USB_EP_NI4_TXMAXP 0xffc03f00 /* Maximum packet size for Host Tx endpoint4 */ +#define USB_EP_NI4_TXCSR 0xffc03f04 /* Control Status register for endpoint4 */ +#define USB_EP_NI4_RXMAXP 0xffc03f08 /* Maximum packet size for Host Rx endpoint4 */ +#define USB_EP_NI4_RXCSR 0xffc03f0c /* Control Status register for Host Rx endpoint4 */ +#define USB_EP_NI4_RXCOUNT 0xffc03f10 /* Number of bytes received in endpoint4 FIFO */ +#define USB_EP_NI4_TXTYPE 0xffc03f14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint4 */ +#define USB_EP_NI4_TXINTERVAL 0xffc03f18 /* Sets the NAK response timeout on Endpoint4 */ +#define USB_EP_NI4_RXTYPE 0xffc03f1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint4 */ +#define USB_EP_NI4_RXINTERVAL 0xffc03f20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint4 */ + +/* USB Endpoint 5 Control Registers */ + +#define USB_EP_NI4_TXCOUNT 0xffc03f28 /* Number of bytes to be written to the endpoint4 Tx FIFO */ +#define USB_EP_NI5_TXMAXP 0xffc03f40 /* Maximum packet size for Host Tx endpoint5 */ +#define USB_EP_NI5_TXCSR 0xffc03f44 /* Control Status register for endpoint5 */ +#define USB_EP_NI5_RXMAXP 0xffc03f48 /* Maximum packet size for Host Rx endpoint5 */ +#define USB_EP_NI5_RXCSR 0xffc03f4c /* Control Status register for Host Rx endpoint5 */ +#define USB_EP_NI5_RXCOUNT 0xffc03f50 /* Number of bytes received in endpoint5 FIFO */ +#define USB_EP_NI5_TXTYPE 0xffc03f54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint5 */ +#define USB_EP_NI5_TXINTERVAL 0xffc03f58 /* Sets the NAK response timeout on Endpoint5 */ +#define USB_EP_NI5_RXTYPE 0xffc03f5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint5 */ +#define USB_EP_NI5_RXINTERVAL 0xffc03f60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint5 */ + +/* USB Endpoint 6 Control Registers */ + +#define USB_EP_NI5_TXCOUNT 0xffc03f68 /* Number of bytes to be written to the H145endpoint5 Tx FIFO */ +#define USB_EP_NI6_TXMAXP 0xffc03f80 /* Maximum packet size for Host Tx endpoint6 */ +#define USB_EP_NI6_TXCSR 0xffc03f84 /* Control Status register for endpoint6 */ +#define USB_EP_NI6_RXMAXP 0xffc03f88 /* Maximum packet size for Host Rx endpoint6 */ +#define USB_EP_NI6_RXCSR 0xffc03f8c /* Control Status register for Host Rx endpoint6 */ +#define USB_EP_NI6_RXCOUNT 0xffc03f90 /* Number of bytes received in endpoint6 FIFO */ +#define USB_EP_NI6_TXTYPE 0xffc03f94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint6 */ +#define USB_EP_NI6_TXINTERVAL 0xffc03f98 /* Sets the NAK response timeout on Endpoint6 */ +#define USB_EP_NI6_RXTYPE 0xffc03f9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint6 */ +#define USB_EP_NI6_RXINTERVAL 0xffc03fa0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint6 */ + +/* USB Endpoint 7 Control Registers */ + +#define USB_EP_NI6_TXCOUNT 0xffc03fa8 /* Number of bytes to be written to the endpoint6 Tx FIFO */ +#define USB_EP_NI7_TXMAXP 0xffc03fc0 /* Maximum packet size for Host Tx endpoint7 */ +#define USB_EP_NI7_TXCSR 0xffc03fc4 /* Control Status register for endpoint7 */ +#define USB_EP_NI7_RXMAXP 0xffc03fc8 /* Maximum packet size for Host Rx endpoint7 */ +#define USB_EP_NI7_RXCSR 0xffc03fcc /* Control Status register for Host Rx endpoint7 */ +#define USB_EP_NI7_RXCOUNT 0xffc03fd0 /* Number of bytes received in endpoint7 FIFO */ +#define USB_EP_NI7_TXTYPE 0xffc03fd4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */ +#define USB_EP_NI7_TXINTERVAL 0xffc03fd8 /* Sets the NAK response timeout on Endpoint7 */ +#define USB_EP_NI7_RXTYPE 0xffc03fdc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */ +#define USB_EP_NI7_RXINTERVAL 0xffc03ff0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */ +#define USB_EP_NI7_TXCOUNT 0xffc03ff8 /* Number of bytes to be written to the endpoint7 Tx FIFO */ +#define USB_DMA_INTERRUPT 0xffc04000 /* Indicates pending interrupts for the DMA channels */ + +/* USB Channel 0 Config Registers */ + +#define USB_DMA0CONTROL 0xffc04004 /* DMA master channel 0 configuration */ +#define USB_DMA0ADDRLOW 0xffc04008 /* Lower 16-bits of memory source/destination address for DMA master channel 0 */ +#define USB_DMA0ADDRHIGH 0xffc0400c /* Upper 16-bits of memory source/destination address for DMA master channel 0 */ +#define USB_DMA0COUNTLOW 0xffc04010 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 0 */ +#define USB_DMA0COUNTHIGH 0xffc04014 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 0 */ + +/* USB Channel 1 Config Registers */ + +#define USB_DMA1CONTROL 0xffc04024 /* DMA master channel 1 configuration */ +#define USB_DMA1ADDRLOW 0xffc04028 /* Lower 16-bits of memory source/destination address for DMA master channel 1 */ +#define USB_DMA1ADDRHIGH 0xffc0402c /* Upper 16-bits of memory source/destination address for DMA master channel 1 */ +#define USB_DMA1COUNTLOW 0xffc04030 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 1 */ +#define USB_DMA1COUNTHIGH 0xffc04034 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 1 */ + +/* USB Channel 2 Config Registers */ + +#define USB_DMA2CONTROL 0xffc04044 /* DMA master channel 2 configuration */ +#define USB_DMA2ADDRLOW 0xffc04048 /* Lower 16-bits of memory source/destination address for DMA master channel 2 */ +#define USB_DMA2ADDRHIGH 0xffc0404c /* Upper 16-bits of memory source/destination address for DMA master channel 2 */ +#define USB_DMA2COUNTLOW 0xffc04050 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 2 */ +#define USB_DMA2COUNTHIGH 0xffc04054 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 2 */ + +/* USB Channel 3 Config Registers */ + +#define USB_DMA3CONTROL 0xffc04064 /* DMA master channel 3 configuration */ +#define USB_DMA3ADDRLOW 0xffc04068 /* Lower 16-bits of memory source/destination address for DMA master channel 3 */ +#define USB_DMA3ADDRHIGH 0xffc0406c /* Upper 16-bits of memory source/destination address for DMA master channel 3 */ +#define USB_DMA3COUNTLOW 0xffc04070 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 3 */ +#define USB_DMA3COUNTHIGH 0xffc04074 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 3 */ + +/* USB Channel 4 Config Registers */ + +#define USB_DMA4CONTROL 0xffc04084 /* DMA master channel 4 configuration */ +#define USB_DMA4ADDRLOW 0xffc04088 /* Lower 16-bits of memory source/destination address for DMA master channel 4 */ +#define USB_DMA4ADDRHIGH 0xffc0408c /* Upper 16-bits of memory source/destination address for DMA master channel 4 */ +#define USB_DMA4COUNTLOW 0xffc04090 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 4 */ +#define USB_DMA4COUNTHIGH 0xffc04094 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 4 */ + +/* USB Channel 5 Config Registers */ + +#define USB_DMA5CONTROL 0xffc040a4 /* DMA master channel 5 configuration */ +#define USB_DMA5ADDRLOW 0xffc040a8 /* Lower 16-bits of memory source/destination address for DMA master channel 5 */ +#define USB_DMA5ADDRHIGH 0xffc040ac /* Upper 16-bits of memory source/destination address for DMA master channel 5 */ +#define USB_DMA5COUNTLOW 0xffc040b0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 5 */ +#define USB_DMA5COUNTHIGH 0xffc040b4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 5 */ + +/* USB Channel 6 Config Registers */ + +#define USB_DMA6CONTROL 0xffc040c4 /* DMA master channel 6 configuration */ +#define USB_DMA6ADDRLOW 0xffc040c8 /* Lower 16-bits of memory source/destination address for DMA master channel 6 */ +#define USB_DMA6ADDRHIGH 0xffc040cc /* Upper 16-bits of memory source/destination address for DMA master channel 6 */ +#define USB_DMA6COUNTLOW 0xffc040d0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 6 */ +#define USB_DMA6COUNTHIGH 0xffc040d4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 6 */ + +/* USB Channel 7 Config Registers */ + +#define USB_DMA7CONTROL 0xffc040e4 /* DMA master channel 7 configuration */ +#define USB_DMA7ADDRLOW 0xffc040e8 /* Lower 16-bits of memory source/destination address for DMA master channel 7 */ +#define USB_DMA7ADDRHIGH 0xffc040ec /* Upper 16-bits of memory source/destination address for DMA master channel 7 */ +#define USB_DMA7COUNTLOW 0xffc040f0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 7 */ +#define USB_DMA7COUNTHIGH 0xffc040f4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 7 */ + +/* Keypad Registers */ + +#define KPAD_CTL 0xffc04100 /* Controls keypad module enable and disable */ +#define KPAD_PRESCALE 0xffc04104 /* Establish a time base for programing the KPAD_MSEL register */ +#define KPAD_MSEL 0xffc04108 /* Selects delay parameters for keypad interface sensitivity */ +#define KPAD_ROWCOL 0xffc0410c /* Captures the row and column output values of the keys pressed */ +#define KPAD_STAT 0xffc04110 /* Holds and clears the status of the keypad interface interrupt */ +#define KPAD_SOFTEVAL 0xffc04114 /* Lets software force keypad interface to check for keys being pressed */ + + +/* ********************************************************** */ +/* SINGLE BIT MACRO PAIRS (bit mask and negated one) */ +/* and MULTI BIT READ MACROS */ +/* ********************************************************** */ + +/* Bit masks for KPAD_CTL */ + +#define KPAD_EN 0x1 /* Keypad Enable */ +#define nKPAD_EN 0x0 +#define KPAD_IRQMODE 0x6 /* Key Press Interrupt Enable */ +#define KPAD_ROWEN 0x1c00 /* Row Enable Width */ +#define KPAD_COLEN 0xe000 /* Column Enable Width */ + +/* Bit masks for KPAD_PRESCALE */ + +#define KPAD_PRESCALE_VAL 0x3f /* Key Prescale Value */ + +/* Bit masks for KPAD_MSEL */ + +#define DBON_SCALE 0xff /* Debounce Scale Value */ +#define COLDRV_SCALE 0xff00 /* Column Driver Scale Value */ + +/* Bit masks for KPAD_ROWCOL */ + +#define KPAD_ROW 0xff /* Rows Pressed */ +#define KPAD_COL 0xff00 /* Columns Pressed */ + +/* Bit masks for KPAD_STAT */ + +#define KPAD_IRQ 0x1 /* Keypad Interrupt Status */ +#define nKPAD_IRQ 0x0 +#define KPAD_MROWCOL 0x6 /* Multiple Row/Column Keypress Status */ +#define KPAD_PRESSED 0x8 /* Key press current status */ +#define nKPAD_PRESSED 0x0 + +/* Bit masks for KPAD_SOFTEVAL */ + +#define KPAD_SOFTEVAL_E 0x2 /* Software Programmable Force Evaluate */ +#define nKPAD_SOFTEVAL_E 0x0 + +/* Bit masks for SDH_COMMAND */ + +#define CMD_IDX 0x3f /* Command Index */ +#define CMD_RSP 0x40 /* Response */ +#define nCMD_RSP 0x0 +#define CMD_L_RSP 0x80 /* Long Response */ +#define nCMD_L_RSP 0x0 +#define CMD_INT_E 0x100 /* Command Interrupt */ +#define nCMD_INT_E 0x0 +#define CMD_PEND_E 0x200 /* Command Pending */ +#define nCMD_PEND_E 0x0 +#define CMD_E 0x400 /* Command Enable */ +#define nCMD_E 0x0 + +/* Bit masks for SDH_PWR_CTL */ + +#define PWR_ON 0x3 /* Power On */ +#if 0 +#define TBD 0x3c /* TBD */ +#endif +#define SD_CMD_OD 0x40 /* Open Drain Output */ +#define nSD_CMD_OD 0x0 +#define ROD_CTL 0x80 /* Rod Control */ +#define nROD_CTL 0x0 + +/* Bit masks for SDH_CLK_CTL */ + +#define CLKDIV 0xff /* MC_CLK Divisor */ +#define CLK_E 0x100 /* MC_CLK Bus Clock Enable */ +#define nCLK_E 0x0 +#define PWR_SV_E 0x200 /* Power Save Enable */ +#define nPWR_SV_E 0x0 +#define CLKDIV_BYPASS 0x400 /* Bypass Divisor */ +#define nCLKDIV_BYPASS 0x0 +#define WIDE_BUS 0x800 /* Wide Bus Mode Enable */ +#define nWIDE_BUS 0x0 + +/* Bit masks for SDH_RESP_CMD */ + +#define RESP_CMD 0x3f /* Response Command */ + +/* Bit masks for SDH_DATA_CTL */ + +#define DTX_E 0x1 /* Data Transfer Enable */ +#define nDTX_E 0x0 +#define DTX_DIR 0x2 /* Data Transfer Direction */ +#define nDTX_DIR 0x0 +#define DTX_MODE 0x4 /* Data Transfer Mode */ +#define nDTX_MODE 0x0 +#define DTX_DMA_E 0x8 /* Data Transfer DMA Enable */ +#define nDTX_DMA_E 0x0 +#define DTX_BLK_LGTH 0xf0 /* Data Transfer Block Length */ + +/* Bit masks for SDH_STATUS */ + +#define CMD_CRC_FAIL 0x1 /* CMD CRC Fail */ +#define nCMD_CRC_FAIL 0x0 +#define DAT_CRC_FAIL 0x2 /* Data CRC Fail */ +#define nDAT_CRC_FAIL 0x0 +#define CMD_TIMEOUT 0x4 /* CMD Time Out */ +#define nCMD_TIMEOUT 0x0 +#define DAT_TIMEOUT 0x8 /* Data Time Out */ +#define nDAT_TIMEOUT 0x0 +#define TX_UNDERRUN 0x10 /* Transmit Underrun */ +#define nTX_UNDERRUN 0x0 +#define RX_OVERRUN 0x20 /* Receive Overrun */ +#define nRX_OVERRUN 0x0 +#define CMD_RESP_END 0x40 /* CMD Response End */ +#define nCMD_RESP_END 0x0 +#define CMD_SENT 0x80 /* CMD Sent */ +#define nCMD_SENT 0x0 +#define DAT_END 0x100 /* Data End */ +#define nDAT_END 0x0 +#define START_BIT_ERR 0x200 /* Start Bit Error */ +#define nSTART_BIT_ERR 0x0 +#define DAT_BLK_END 0x400 /* Data Block End */ +#define nDAT_BLK_END 0x0 +#define CMD_ACT 0x800 /* CMD Active */ +#define nCMD_ACT 0x0 +#define TX_ACT 0x1000 /* Transmit Active */ +#define nTX_ACT 0x0 +#define RX_ACT 0x2000 /* Receive Active */ +#define nRX_ACT 0x0 +#define TX_FIFO_STAT 0x4000 /* Transmit FIFO Status */ +#define nTX_FIFO_STAT 0x0 +#define RX_FIFO_STAT 0x8000 /* Receive FIFO Status */ +#define nRX_FIFO_STAT 0x0 +#define TX_FIFO_FULL 0x10000 /* Transmit FIFO Full */ +#define nTX_FIFO_FULL 0x0 +#define RX_FIFO_FULL 0x20000 /* Receive FIFO Full */ +#define nRX_FIFO_FULL 0x0 +#define TX_FIFO_ZERO 0x40000 /* Transmit FIFO Empty */ +#define nTX_FIFO_ZERO 0x0 +#define RX_DAT_ZERO 0x80000 /* Receive FIFO Empty */ +#define nRX_DAT_ZERO 0x0 +#define TX_DAT_RDY 0x100000 /* Transmit Data Available */ +#define nTX_DAT_RDY 0x0 +#define RX_FIFO_RDY 0x200000 /* Receive Data Available */ +#define nRX_FIFO_RDY 0x0 + +/* Bit masks for SDH_STATUS_CLR */ + +#define CMD_CRC_FAIL_STAT 0x1 /* CMD CRC Fail Status */ +#define nCMD_CRC_FAIL_STAT 0x0 +#define DAT_CRC_FAIL_STAT 0x2 /* Data CRC Fail Status */ +#define nDAT_CRC_FAIL_STAT 0x0 +#define CMD_TIMEOUT_STAT 0x4 /* CMD Time Out Status */ +#define nCMD_TIMEOUT_STAT 0x0 +#define DAT_TIMEOUT_STAT 0x8 /* Data Time Out status */ +#define nDAT_TIMEOUT_STAT 0x0 +#define TX_UNDERRUN_STAT 0x10 /* Transmit Underrun Status */ +#define nTX_UNDERRUN_STAT 0x0 +#define RX_OVERRUN_STAT 0x20 /* Receive Overrun Status */ +#define nRX_OVERRUN_STAT 0x0 +#define CMD_RESP_END_STAT 0x40 /* CMD Response End Status */ +#define nCMD_RESP_END_STAT 0x0 +#define CMD_SENT_STAT 0x80 /* CMD Sent Status */ +#define nCMD_SENT_STAT 0x0 +#define DAT_END_STAT 0x100 /* Data End Status */ +#define nDAT_END_STAT 0x0 +#define START_BIT_ERR_STAT 0x200 /* Start Bit Error Status */ +#define nSTART_BIT_ERR_STAT 0x0 +#define DAT_BLK_END_STAT 0x400 /* Data Block End Status */ +#define nDAT_BLK_END_STAT 0x0 + +/* Bit masks for SDH_MASK0 */ + +#define CMD_CRC_FAIL_MASK 0x1 /* CMD CRC Fail Mask */ +#define nCMD_CRC_FAIL_MASK 0x0 +#define DAT_CRC_FAIL_MASK 0x2 /* Data CRC Fail Mask */ +#define nDAT_CRC_FAIL_MASK 0x0 +#define CMD_TIMEOUT_MASK 0x4 /* CMD Time Out Mask */ +#define nCMD_TIMEOUT_MASK 0x0 +#define DAT_TIMEOUT_MASK 0x8 /* Data Time Out Mask */ +#define nDAT_TIMEOUT_MASK 0x0 +#define TX_UNDERRUN_MASK 0x10 /* Transmit Underrun Mask */ +#define nTX_UNDERRUN_MASK 0x0 +#define RX_OVERRUN_MASK 0x20 /* Receive Overrun Mask */ +#define nRX_OVERRUN_MASK 0x0 +#define CMD_RESP_END_MASK 0x40 /* CMD Response End Mask */ +#define nCMD_RESP_END_MASK 0x0 +#define CMD_SENT_MASK 0x80 /* CMD Sent Mask */ +#define nCMD_SENT_MASK 0x0 +#define DAT_END_MASK 0x100 /* Data End Mask */ +#define nDAT_END_MASK 0x0 +#define START_BIT_ERR_MASK 0x200 /* Start Bit Error Mask */ +#define nSTART_BIT_ERR_MASK 0x0 +#define DAT_BLK_END_MASK 0x400 /* Data Block End Mask */ +#define nDAT_BLK_END_MASK 0x0 +#define CMD_ACT_MASK 0x800 /* CMD Active Mask */ +#define nCMD_ACT_MASK 0x0 +#define TX_ACT_MASK 0x1000 /* Transmit Active Mask */ +#define nTX_ACT_MASK 0x0 +#define RX_ACT_MASK 0x2000 /* Receive Active Mask */ +#define nRX_ACT_MASK 0x0 +#define TX_FIFO_STAT_MASK 0x4000 /* Transmit FIFO Status Mask */ +#define nTX_FIFO_STAT_MASK 0x0 +#define RX_FIFO_STAT_MASK 0x8000 /* Receive FIFO Status Mask */ +#define nRX_FIFO_STAT_MASK 0x0 +#define TX_FIFO_FULL_MASK 0x10000 /* Transmit FIFO Full Mask */ +#define nTX_FIFO_FULL_MASK 0x0 +#define RX_FIFO_FULL_MASK 0x20000 /* Receive FIFO Full Mask */ +#define nRX_FIFO_FULL_MASK 0x0 +#define TX_FIFO_ZERO_MASK 0x40000 /* Transmit FIFO Empty Mask */ +#define nTX_FIFO_ZERO_MASK 0x0 +#define RX_DAT_ZERO_MASK 0x80000 /* Receive FIFO Empty Mask */ +#define nRX_DAT_ZERO_MASK 0x0 +#define TX_DAT_RDY_MASK 0x100000 /* Transmit Data Available Mask */ +#define nTX_DAT_RDY_MASK 0x0 +#define RX_FIFO_RDY_MASK 0x200000 /* Receive Data Available Mask */ +#define nRX_FIFO_RDY_MASK 0x0 + +/* Bit masks for SDH_FIFO_CNT */ + +#define FIFO_COUNT 0x7fff /* FIFO Count */ + +/* Bit masks for SDH_E_STATUS */ + +#define SDIO_INT_DET 0x2 /* SDIO Int Detected */ +#define nSDIO_INT_DET 0x0 +#define SD_CARD_DET 0x10 /* SD Card Detect */ +#define nSD_CARD_DET 0x0 + +/* Bit masks for SDH_E_MASK */ + +#define SDIO_MSK 0x2 /* Mask SDIO Int Detected */ +#define nSDIO_MSK 0x0 +#define SCD_MSK 0x40 /* Mask Card Detect */ +#define nSCD_MSK 0x0 + +/* Bit masks for SDH_CFG */ + +#define CLKS_EN 0x1 /* Clocks Enable */ +#define nCLKS_EN 0x0 +#define SD4E 0x4 /* SDIO 4-Bit Enable */ +#define nSD4E 0x0 +#define MWE 0x8 /* Moving Window Enable */ +#define nMWE 0x0 +#define SD_RST 0x10 /* SDMMC Reset */ +#define nSD_RST 0x0 +#define PUP_SDDAT 0x20 /* Pull-up SD_DAT */ +#define nPUP_SDDAT 0x0 +#define PUP_SDDAT3 0x40 /* Pull-up SD_DAT3 */ +#define nPUP_SDDAT3 0x0 +#define PD_SDDAT3 0x80 /* Pull-down SD_DAT3 */ +#define nPD_SDDAT3 0x0 + +/* Bit masks for SDH_RD_WAIT_EN */ + +#define RWR 0x1 /* Read Wait Request */ +#define nRWR 0x0 + +/* Bit masks for ATAPI_CONTROL */ + +#define PIO_START 0x1 /* Start PIO/Reg Op */ +#define nPIO_START 0x0 +#define MULTI_START 0x2 /* Start Multi-DMA Op */ +#define nMULTI_START 0x0 +#define ULTRA_START 0x4 /* Start Ultra-DMA Op */ +#define nULTRA_START 0x0 +#define XFER_DIR 0x8 /* Transfer Direction */ +#define nXFER_DIR 0x0 +#define IORDY_EN 0x10 /* IORDY Enable */ +#define nIORDY_EN 0x0 +#define FIFO_FLUSH 0x20 /* Flush FIFOs */ +#define nFIFO_FLUSH 0x0 +#define SOFT_RST 0x40 /* Soft Reset */ +#define nSOFT_RST 0x0 +#define DEV_RST 0x80 /* Device Reset */ +#define nDEV_RST 0x0 +#define TFRCNT_RST 0x100 /* Trans Count Reset */ +#define nTFRCNT_RST 0x0 +#define END_ON_TERM 0x200 /* End/Terminate Select */ +#define nEND_ON_TERM 0x0 +#define PIO_USE_DMA 0x400 /* PIO-DMA Enable */ +#define nPIO_USE_DMA 0x0 +#define UDMAIN_FIFO_THRS 0xf000 /* Ultra DMA-IN FIFO Threshold */ + +/* Bit masks for ATAPI_STATUS */ + +#define PIO_XFER_ON 0x1 /* PIO transfer in progress */ +#define nPIO_XFER_ON 0x0 +#define MULTI_XFER_ON 0x2 /* Multi-word DMA transfer in progress */ +#define nMULTI_XFER_ON 0x0 +#define ULTRA_XFER_ON 0x4 /* Ultra DMA transfer in progress */ +#define nULTRA_XFER_ON 0x0 +#define ULTRA_IN_FL 0xf0 /* Ultra DMA Input FIFO Level */ + +/* Bit masks for ATAPI_DEV_ADDR */ + +#define DEV_ADDR 0x1f /* Device Address */ + +/* Bit masks for ATAPI_INT_MASK */ + +#define ATAPI_DEV_INT_MASK 0x1 /* Device interrupt mask */ +#define nATAPI_DEV_INT_MASK 0x0 +#define PIO_DONE_MASK 0x2 /* PIO transfer done interrupt mask */ +#define nPIO_DONE_MASK 0x0 +#define MULTI_DONE_MASK 0x4 /* Multi-DMA transfer done interrupt mask */ +#define nMULTI_DONE_MASK 0x0 +#define UDMAIN_DONE_MASK 0x8 /* Ultra-DMA in transfer done interrupt mask */ +#define nUDMAIN_DONE_MASK 0x0 +#define UDMAOUT_DONE_MASK 0x10 /* Ultra-DMA out transfer done interrupt mask */ +#define nUDMAOUT_DONE_MASK 0x0 +#define HOST_TERM_XFER_MASK 0x20 /* Host terminate current transfer interrupt mask */ +#define nHOST_TERM_XFER_MASK 0x0 +#define MULTI_TERM_MASK 0x40 /* Device terminate Multi-DMA transfer interrupt mask */ +#define nMULTI_TERM_MASK 0x0 +#define UDMAIN_TERM_MASK 0x80 /* Device terminate Ultra-DMA-in transfer interrupt mask */ +#define nUDMAIN_TERM_MASK 0x0 +#define UDMAOUT_TERM_MASK 0x100 /* Device terminate Ultra-DMA-out transfer interrupt mask */ +#define nUDMAOUT_TERM_MASK 0x0 + +/* Bit masks for ATAPI_INT_STATUS */ + +#define ATAPI_DEV_INT 0x1 /* Device interrupt status */ +#define nATAPI_DEV_INT 0x0 +#define PIO_DONE_INT 0x2 /* PIO transfer done interrupt status */ +#define nPIO_DONE_INT 0x0 +#define MULTI_DONE_INT 0x4 /* Multi-DMA transfer done interrupt status */ +#define nMULTI_DONE_INT 0x0 +#define UDMAIN_DONE_INT 0x8 /* Ultra-DMA in transfer done interrupt status */ +#define nUDMAIN_DONE_INT 0x0 +#define UDMAOUT_DONE_INT 0x10 /* Ultra-DMA out transfer done interrupt status */ +#define nUDMAOUT_DONE_INT 0x0 +#define HOST_TERM_XFER_INT 0x20 /* Host terminate current transfer interrupt status */ +#define nHOST_TERM_XFER_INT 0x0 +#define MULTI_TERM_INT 0x40 /* Device terminate Multi-DMA transfer interrupt status */ +#define nMULTI_TERM_INT 0x0 +#define UDMAIN_TERM_INT 0x80 /* Device terminate Ultra-DMA-in transfer interrupt status */ +#define nUDMAIN_TERM_INT 0x0 +#define UDMAOUT_TERM_INT 0x100 /* Device terminate Ultra-DMA-out transfer interrupt status */ +#define nUDMAOUT_TERM_INT 0x0 + +/* Bit masks for ATAPI_LINE_STATUS */ + +#define ATAPI_INTR 0x1 /* Device interrupt to host line status */ +#define nATAPI_INTR 0x0 +#define ATAPI_DASP 0x2 /* Device dasp to host line status */ +#define nATAPI_DASP 0x0 +#define ATAPI_CS0N 0x4 /* ATAPI chip select 0 line status */ +#define nATAPI_CS0N 0x0 +#define ATAPI_CS1N 0x8 /* ATAPI chip select 1 line status */ +#define nATAPI_CS1N 0x0 +#define ATAPI_ADDR 0x70 /* ATAPI address line status */ +#define ATAPI_DMAREQ 0x80 /* ATAPI DMA request line status */ +#define nATAPI_DMAREQ 0x0 +#define ATAPI_DMAACKN 0x100 /* ATAPI DMA acknowledge line status */ +#define nATAPI_DMAACKN 0x0 +#define ATAPI_DIOWN 0x200 /* ATAPI write line status */ +#define nATAPI_DIOWN 0x0 +#define ATAPI_DIORN 0x400 /* ATAPI read line status */ +#define nATAPI_DIORN 0x0 +#define ATAPI_IORDY 0x800 /* ATAPI IORDY line status */ +#define nATAPI_IORDY 0x0 + +/* Bit masks for ATAPI_SM_STATE */ + +#define PIO_CSTATE 0xf /* PIO mode state machine current state */ +#define DMA_CSTATE 0xf0 /* DMA mode state machine current state */ +#define UDMAIN_CSTATE 0xf00 /* Ultra DMA-In mode state machine current state */ +#define UDMAOUT_CSTATE 0xf000 /* ATAPI IORDY line status */ + +/* Bit masks for ATAPI_TERMINATE */ + +#define ATAPI_HOST_TERM 0x1 /* Host terminationation */ +#define nATAPI_HOST_TERM 0x0 + +/* Bit masks for ATAPI_REG_TIM_0 */ + +#define T2_REG 0xff /* End of cycle time for register access transfers */ +#define TEOC_REG 0xff00 /* Selects DIOR/DIOW pulsewidth */ + +/* Bit masks for ATAPI_PIO_TIM_0 */ + +#define T1_REG 0xf /* Time from address valid to DIOR/DIOW */ +#define T2_REG_PIO 0xff0 /* DIOR/DIOW pulsewidth */ +#define T4_REG 0xf000 /* DIOW data hold */ + +/* Bit masks for ATAPI_PIO_TIM_1 */ + +#define TEOC_REG_PIO 0xff /* End of cycle time for PIO access transfers. */ + +/* Bit masks for ATAPI_MULTI_TIM_0 */ + +#define TD 0xff /* DIOR/DIOW asserted pulsewidth */ +#define TM 0xff00 /* Time from address valid to DIOR/DIOW */ + +/* Bit masks for ATAPI_MULTI_TIM_1 */ + +#define TKW 0xff /* Selects DIOW negated pulsewidth */ +#define TKR 0xff00 /* Selects DIOR negated pulsewidth */ + +/* Bit masks for ATAPI_MULTI_TIM_2 */ + +#define TH 0xff /* Selects DIOW data hold */ +#define TEOC 0xff00 /* Selects end of cycle for DMA */ + +/* Bit masks for ATAPI_ULTRA_TIM_0 */ + +#define TACK 0xff /* Selects setup and hold times for TACK */ +#define TENV 0xff00 /* Selects envelope time */ + +/* Bit masks for ATAPI_ULTRA_TIM_1 */ + +#define TDVS 0xff /* Selects data valid setup time */ +#define TCYC_TDVS 0xff00 /* Selects cycle time - TDVS time */ + +/* Bit masks for ATAPI_ULTRA_TIM_2 */ + +#define TSS 0xff /* Selects time from STROBE edge to negation of DMARQ or assertion of STOP */ +#define TMLI 0xff00 /* Selects interlock time */ + +/* Bit masks for ATAPI_ULTRA_TIM_3 */ + +#define TZAH 0xff /* Selects minimum delay required for output */ +#define READY_PAUSE 0xff00 /* Selects ready to pause */ + +/* Bit masks for USB_FADDR */ + +#define FUNCTION_ADDRESS 0x7f /* Function address */ + +/* Bit masks for USB_POWER */ + +#define ENABLE_SUSPENDM 0x1 /* enable SuspendM output */ +#define nENABLE_SUSPENDM 0x0 +#define SUSPEND_MODE 0x2 /* Suspend Mode indicator */ +#define nSUSPEND_MODE 0x0 +#define RESUME_MODE 0x4 /* DMA Mode */ +#define nRESUME_MODE 0x0 +#define RESET 0x8 /* Reset indicator */ +#define nRESET 0x0 +#define HS_MODE 0x10 /* High Speed mode indicator */ +#define nHS_MODE 0x0 +#define HS_ENABLE 0x20 /* high Speed Enable */ +#define nHS_ENABLE 0x0 +#define SOFT_CONN 0x40 /* Soft connect */ +#define nSOFT_CONN 0x0 +#define ISO_UPDATE 0x80 /* Isochronous update */ +#define nISO_UPDATE 0x0 + +/* Bit masks for USB_INTRTX */ + +#define EP0_TX 0x1 /* Tx Endpoint 0 interrupt */ +#define nEP0_TX 0x0 +#define EP1_TX 0x2 /* Tx Endpoint 1 interrupt */ +#define nEP1_TX 0x0 +#define EP2_TX 0x4 /* Tx Endpoint 2 interrupt */ +#define nEP2_TX 0x0 +#define EP3_TX 0x8 /* Tx Endpoint 3 interrupt */ +#define nEP3_TX 0x0 +#define EP4_TX 0x10 /* Tx Endpoint 4 interrupt */ +#define nEP4_TX 0x0 +#define EP5_TX 0x20 /* Tx Endpoint 5 interrupt */ +#define nEP5_TX 0x0 +#define EP6_TX 0x40 /* Tx Endpoint 6 interrupt */ +#define nEP6_TX 0x0 +#define EP7_TX 0x80 /* Tx Endpoint 7 interrupt */ +#define nEP7_TX 0x0 + +/* Bit masks for USB_INTRRX */ + +#define EP1_RX 0x2 /* Rx Endpoint 1 interrupt */ +#define nEP1_RX 0x0 +#define EP2_RX 0x4 /* Rx Endpoint 2 interrupt */ +#define nEP2_RX 0x0 +#define EP3_RX 0x8 /* Rx Endpoint 3 interrupt */ +#define nEP3_RX 0x0 +#define EP4_RX 0x10 /* Rx Endpoint 4 interrupt */ +#define nEP4_RX 0x0 +#define EP5_RX 0x20 /* Rx Endpoint 5 interrupt */ +#define nEP5_RX 0x0 +#define EP6_RX 0x40 /* Rx Endpoint 6 interrupt */ +#define nEP6_RX 0x0 +#define EP7_RX 0x80 /* Rx Endpoint 7 interrupt */ +#define nEP7_RX 0x0 + +/* Bit masks for USB_INTRTXE */ + +#define EP0_TX_E 0x1 /* Endpoint 0 interrupt Enable */ +#define nEP0_TX_E 0x0 +#define EP1_TX_E 0x2 /* Tx Endpoint 1 interrupt Enable */ +#define nEP1_TX_E 0x0 +#define EP2_TX_E 0x4 /* Tx Endpoint 2 interrupt Enable */ +#define nEP2_TX_E 0x0 +#define EP3_TX_E 0x8 /* Tx Endpoint 3 interrupt Enable */ +#define nEP3_TX_E 0x0 +#define EP4_TX_E 0x10 /* Tx Endpoint 4 interrupt Enable */ +#define nEP4_TX_E 0x0 +#define EP5_TX_E 0x20 /* Tx Endpoint 5 interrupt Enable */ +#define nEP5_TX_E 0x0 +#define EP6_TX_E 0x40 /* Tx Endpoint 6 interrupt Enable */ +#define nEP6_TX_E 0x0 +#define EP7_TX_E 0x80 /* Tx Endpoint 7 interrupt Enable */ +#define nEP7_TX_E 0x0 + +/* Bit masks for USB_INTRRXE */ + +#define EP1_RX_E 0x2 /* Rx Endpoint 1 interrupt Enable */ +#define nEP1_RX_E 0x0 +#define EP2_RX_E 0x4 /* Rx Endpoint 2 interrupt Enable */ +#define nEP2_RX_E 0x0 +#define EP3_RX_E 0x8 /* Rx Endpoint 3 interrupt Enable */ +#define nEP3_RX_E 0x0 +#define EP4_RX_E 0x10 /* Rx Endpoint 4 interrupt Enable */ +#define nEP4_RX_E 0x0 +#define EP5_RX_E 0x20 /* Rx Endpoint 5 interrupt Enable */ +#define nEP5_RX_E 0x0 +#define EP6_RX_E 0x40 /* Rx Endpoint 6 interrupt Enable */ +#define nEP6_RX_E 0x0 +#define EP7_RX_E 0x80 /* Rx Endpoint 7 interrupt Enable */ +#define nEP7_RX_E 0x0 + +/* Bit masks for USB_INTRUSB */ + +#define SUSPEND_B 0x1 /* Suspend indicator */ +#define nSUSPEND_B 0x0 +#define RESUME_B 0x2 /* Resume indicator */ +#define nRESUME_B 0x0 +#define RESET_OR_BABLE_B 0x4 /* Reset/babble indicator */ +#define nRESET_OR_BABLE_B 0x0 +#define SOF_B 0x8 /* Start of frame */ +#define nSOF_B 0x0 +#define CONN_B 0x10 /* Connection indicator */ +#define nCONN_B 0x0 +#define DISCON_B 0x20 /* Disconnect indicator */ +#define nDISCON_B 0x0 +#define SESSION_REQ_B 0x40 /* Session Request */ +#define nSESSION_REQ_B 0x0 +#define VBUS_ERROR_B 0x80 /* Vbus threshold indicator */ +#define nVBUS_ERROR_B 0x0 + +/* Bit masks for USB_INTRUSBE */ + +#define SUSPEND_BE 0x1 /* Suspend indicator int enable */ +#define nSUSPEND_BE 0x0 +#define RESUME_BE 0x2 /* Resume indicator int enable */ +#define nRESUME_BE 0x0 +#define RESET_OR_BABLE_BE 0x4 /* Reset/babble indicator int enable */ +#define nRESET_OR_BABLE_BE 0x0 +#define SOF_BE 0x8 /* Start of frame int enable */ +#define nSOF_BE 0x0 +#define CONN_BE 0x10 /* Connection indicator int enable */ +#define nCONN_BE 0x0 +#define DISCON_BE 0x20 /* Disconnect indicator int enable */ +#define nDISCON_BE 0x0 +#define SESSION_REQ_BE 0x40 /* Session Request int enable */ +#define nSESSION_REQ_BE 0x0 +#define VBUS_ERROR_BE 0x80 /* Vbus threshold indicator int enable */ +#define nVBUS_ERROR_BE 0x0 + +/* Bit masks for USB_FRAME */ + +#define FRAME_NUMBER 0x7ff /* Frame number */ + +/* Bit masks for USB_INDEX */ + +#define SELECTED_ENDPOINT 0xf /* selected endpoint */ + +/* Bit masks for USB_GLOBAL_CTL */ + +#define GLOBAL_ENA 0x1 /* enables USB module */ +#define nGLOBAL_ENA 0x0 +#define EP1_TX_ENA 0x2 /* Transmit endpoint 1 enable */ +#define nEP1_TX_ENA 0x0 +#define EP2_TX_ENA 0x4 /* Transmit endpoint 2 enable */ +#define nEP2_TX_ENA 0x0 +#define EP3_TX_ENA 0x8 /* Transmit endpoint 3 enable */ +#define nEP3_TX_ENA 0x0 +#define EP4_TX_ENA 0x10 /* Transmit endpoint 4 enable */ +#define nEP4_TX_ENA 0x0 +#define EP5_TX_ENA 0x20 /* Transmit endpoint 5 enable */ +#define nEP5_TX_ENA 0x0 +#define EP6_TX_ENA 0x40 /* Transmit endpoint 6 enable */ +#define nEP6_TX_ENA 0x0 +#define EP7_TX_ENA 0x80 /* Transmit endpoint 7 enable */ +#define nEP7_TX_ENA 0x0 +#define EP1_RX_ENA 0x100 /* Receive endpoint 1 enable */ +#define nEP1_RX_ENA 0x0 +#define EP2_RX_ENA 0x200 /* Receive endpoint 2 enable */ +#define nEP2_RX_ENA 0x0 +#define EP3_RX_ENA 0x400 /* Receive endpoint 3 enable */ +#define nEP3_RX_ENA 0x0 +#define EP4_RX_ENA 0x800 /* Receive endpoint 4 enable */ +#define nEP4_RX_ENA 0x0 +#define EP5_RX_ENA 0x1000 /* Receive endpoint 5 enable */ +#define nEP5_RX_ENA 0x0 +#define EP6_RX_ENA 0x2000 /* Receive endpoint 6 enable */ +#define nEP6_RX_ENA 0x0 +#define EP7_RX_ENA 0x4000 /* Receive endpoint 7 enable */ +#define nEP7_RX_ENA 0x0 + +/* Bit masks for USB_OTG_DEV_CTL */ + +#define SESSION 0x1 /* session indicator */ +#define nSESSION 0x0 +#define HOST_REQ 0x2 /* Host negotiation request */ +#define nHOST_REQ 0x0 +#define HOST_MODE 0x4 /* indicates USBDRC is a host */ +#define nHOST_MODE 0x0 +#define VBUS0 0x8 /* Vbus level indicator[0] */ +#define nVBUS0 0x0 +#define VBUS1 0x10 /* Vbus level indicator[1] */ +#define nVBUS1 0x0 +#define LSDEV 0x20 /* Low-speed indicator */ +#define nLSDEV 0x0 +#define FSDEV 0x40 /* Full or High-speed indicator */ +#define nFSDEV 0x0 +#define B_DEVICE 0x80 /* A' or 'B' device indicator */ +#define nB_DEVICE 0x0 + +/* Bit masks for USB_OTG_VBUS_IRQ */ + +#define DRIVE_VBUS_ON 0x1 /* indicator to drive VBUS control circuit */ +#define nDRIVE_VBUS_ON 0x0 +#define DRIVE_VBUS_OFF 0x2 /* indicator to shut off charge pump */ +#define nDRIVE_VBUS_OFF 0x0 +#define CHRG_VBUS_START 0x4 /* indicator for external circuit to start charging VBUS */ +#define nCHRG_VBUS_START 0x0 +#define CHRG_VBUS_END 0x8 /* indicator for external circuit to end charging VBUS */ +#define nCHRG_VBUS_END 0x0 +#define DISCHRG_VBUS_START 0x10 /* indicator to start discharging VBUS */ +#define nDISCHRG_VBUS_START 0x0 +#define DISCHRG_VBUS_END 0x20 /* indicator to stop discharging VBUS */ +#define nDISCHRG_VBUS_END 0x0 + +/* Bit masks for USB_OTG_VBUS_MASK */ + +#define DRIVE_VBUS_ON_ENA 0x1 /* enable DRIVE_VBUS_ON interrupt */ +#define nDRIVE_VBUS_ON_ENA 0x0 +#define DRIVE_VBUS_OFF_ENA 0x2 /* enable DRIVE_VBUS_OFF interrupt */ +#define nDRIVE_VBUS_OFF_ENA 0x0 +#define CHRG_VBUS_START_ENA 0x4 /* enable CHRG_VBUS_START interrupt */ +#define nCHRG_VBUS_START_ENA 0x0 +#define CHRG_VBUS_END_ENA 0x8 /* enable CHRG_VBUS_END interrupt */ +#define nCHRG_VBUS_END_ENA 0x0 +#define DISCHRG_VBUS_START_ENA 0x10 /* enable DISCHRG_VBUS_START interrupt */ +#define nDISCHRG_VBUS_START_ENA 0x0 +#define DISCHRG_VBUS_END_ENA 0x20 /* enable DISCHRG_VBUS_END interrupt */ +#define nDISCHRG_VBUS_END_ENA 0x0 + +/* Bit masks for USB_CSR0 */ + +#define RXPKTRDY 0x1 /* data packet receive indicator */ +#define nRXPKTRDY 0x0 +#define TXPKTRDY 0x2 /* data packet in FIFO indicator */ +#define nTXPKTRDY 0x0 +#define STALL_SENT 0x4 /* STALL handshake sent */ +#define nSTALL_SENT 0x0 +#define DATAEND 0x8 /* Data end indicator */ +#define nDATAEND 0x0 +#define SETUPEND 0x10 /* Setup end */ +#define nSETUPEND 0x0 +#define SENDSTALL 0x20 /* Send STALL handshake */ +#define nSENDSTALL 0x0 +#define SERVICED_RXPKTRDY 0x40 /* used to clear the RxPktRdy bit */ +#define nSERVICED_RXPKTRDY 0x0 +#define SERVICED_SETUPEND 0x80 /* used to clear the SetupEnd bit */ +#define nSERVICED_SETUPEND 0x0 +#define FLUSHFIFO 0x100 /* flush endpoint FIFO */ +#define nFLUSHFIFO 0x0 +#define STALL_RECEIVED_H 0x4 /* STALL handshake received host mode */ +#define nSTALL_RECEIVED_H 0x0 +#define SETUPPKT_H 0x8 /* send Setup token host mode */ +#define nSETUPPKT_H 0x0 +#define ERROR_H 0x10 /* timeout error indicator host mode */ +#define nERROR_H 0x0 +#define REQPKT_H 0x20 /* Request an IN transaction host mode */ +#define nREQPKT_H 0x0 +#define STATUSPKT_H 0x40 /* Status stage transaction host mode */ +#define nSTATUSPKT_H 0x0 +#define NAK_TIMEOUT_H 0x80 /* EP0 halted after a NAK host mode */ +#define nNAK_TIMEOUT_H 0x0 + +/* Bit masks for USB_COUNT0 */ + +#define EP0_RX_COUNT 0x7f /* number of received bytes in EP0 FIFO */ + +/* Bit masks for USB_NAKLIMIT0 */ + +#define EP0_NAK_LIMIT 0x1f /* number of frames/micro frames after which EP0 timeouts */ + +/* Bit masks for USB_TX_MAX_PACKET */ + +#define MAX_PACKET_SIZE_T 0x7ff /* maximum data pay load in a frame */ + +/* Bit masks for USB_RX_MAX_PACKET */ + +#define MAX_PACKET_SIZE_R 0x7ff /* maximum data pay load in a frame */ + +/* Bit masks for USB_TXCSR */ + +#define TXPKTRDY_T 0x1 /* data packet in FIFO indicator */ +#define nTXPKTRDY_T 0x0 +#define FIFO_NOT_EMPTY_T 0x2 /* FIFO not empty */ +#define nFIFO_NOT_EMPTY_T 0x0 +#define UNDERRUN_T 0x4 /* TxPktRdy not set for an IN token */ +#define nUNDERRUN_T 0x0 +#define FLUSHFIFO_T 0x8 /* flush endpoint FIFO */ +#define nFLUSHFIFO_T 0x0 +#define STALL_SEND_T 0x10 /* issue a Stall handshake */ +#define nSTALL_SEND_T 0x0 +#define STALL_SENT_T 0x20 /* Stall handshake transmitted */ +#define nSTALL_SENT_T 0x0 +#define CLEAR_DATATOGGLE_T 0x40 /* clear endpoint data toggle */ +#define nCLEAR_DATATOGGLE_T 0x0 +#define INCOMPTX_T 0x80 /* indicates that a large packet is split */ +#define nINCOMPTX_T 0x0 +#define DMAREQMODE_T 0x400 /* DMA mode (0 or 1) selection */ +#define nDMAREQMODE_T 0x0 +#define FORCE_DATATOGGLE_T 0x800 /* Force data toggle */ +#define nFORCE_DATATOGGLE_T 0x0 +#define DMAREQ_ENA_T 0x1000 /* Enable DMA request for Tx EP */ +#define nDMAREQ_ENA_T 0x0 +#define ISO_T 0x4000 /* enable Isochronous transfers */ +#define nISO_T 0x0 +#define AUTOSET_T 0x8000 /* allows TxPktRdy to be set automatically */ +#define nAUTOSET_T 0x0 +#define ERROR_TH 0x4 /* error condition host mode */ +#define nERROR_TH 0x0 +#define STALL_RECEIVED_TH 0x20 /* Stall handshake received host mode */ +#define nSTALL_RECEIVED_TH 0x0 +#define NAK_TIMEOUT_TH 0x80 /* NAK timeout host mode */ +#define nNAK_TIMEOUT_TH 0x0 + +/* Bit masks for USB_TXCOUNT */ + +#define TX_COUNT 0x1fff /* Number of bytes to be written to the selected endpoint Tx FIFO */ + +/* Bit masks for USB_RXCSR */ + +#define RXPKTRDY_R 0x1 /* data packet in FIFO indicator */ +#define nRXPKTRDY_R 0x0 +#define FIFO_FULL_R 0x2 /* FIFO not empty */ +#define nFIFO_FULL_R 0x0 +#define OVERRUN_R 0x4 /* TxPktRdy not set for an IN token */ +#define nOVERRUN_R 0x0 +#define DATAERROR_R 0x8 /* Out packet cannot be loaded into Rx FIFO */ +#define nDATAERROR_R 0x0 +#define FLUSHFIFO_R 0x10 /* flush endpoint FIFO */ +#define nFLUSHFIFO_R 0x0 +#define STALL_SEND_R 0x20 /* issue a Stall handshake */ +#define nSTALL_SEND_R 0x0 +#define STALL_SENT_R 0x40 /* Stall handshake transmitted */ +#define nSTALL_SENT_R 0x0 +#define CLEAR_DATATOGGLE_R 0x80 /* clear endpoint data toggle */ +#define nCLEAR_DATATOGGLE_R 0x0 +#define INCOMPRX_R 0x100 /* indicates that a large packet is split */ +#define nINCOMPRX_R 0x0 +#define DMAREQMODE_R 0x800 /* DMA mode (0 or 1) selection */ +#define nDMAREQMODE_R 0x0 +#define DISNYET_R 0x1000 /* disable Nyet handshakes */ +#define nDISNYET_R 0x0 +#define DMAREQ_ENA_R 0x2000 /* Enable DMA request for Tx EP */ +#define nDMAREQ_ENA_R 0x0 +#define ISO_R 0x4000 /* enable Isochronous transfers */ +#define nISO_R 0x0 +#define AUTOCLEAR_R 0x8000 /* allows TxPktRdy to be set automatically */ +#define nAUTOCLEAR_R 0x0 +#define ERROR_RH 0x4 /* TxPktRdy not set for an IN token host mode */ +#define nERROR_RH 0x0 +#define REQPKT_RH 0x20 /* request an IN transaction host mode */ +#define nREQPKT_RH 0x0 +#define STALL_RECEIVED_RH 0x40 /* Stall handshake received host mode */ +#define nSTALL_RECEIVED_RH 0x0 +#define INCOMPRX_RH 0x100 /* indicates that a large packet is split host mode */ +#define nINCOMPRX_RH 0x0 +#define DMAREQMODE_RH 0x800 /* DMA mode (0 or 1) selection host mode */ +#define nDMAREQMODE_RH 0x0 +#define AUTOREQ_RH 0x4000 /* sets ReqPkt automatically host mode */ +#define nAUTOREQ_RH 0x0 + +/* Bit masks for USB_RXCOUNT */ + +#define RX_COUNT 0x1fff /* Number of received bytes in the packet in the Rx FIFO */ + +/* Bit masks for USB_TXTYPE */ + +#define TARGET_EP_NO_T 0xf /* EP number */ +#define PROTOCOL_T 0xc /* transfer type */ + +/* Bit masks for USB_TXINTERVAL */ + +#define TX_POLL_INTERVAL 0xff /* polling interval for selected Tx EP */ + +/* Bit masks for USB_RXTYPE */ + +#define TARGET_EP_NO_R 0xf /* EP number */ +#define PROTOCOL_R 0xc /* transfer type */ + +/* Bit masks for USB_RXINTERVAL */ + +#define RX_POLL_INTERVAL 0xff /* polling interval for selected Rx EP */ + +/* Bit masks for USB_DMA_INTERRUPT */ + +#define DMA0_INT 0x1 /* DMA0 pending interrupt */ +#define nDMA0_INT 0x0 +#define DMA1_INT 0x2 /* DMA1 pending interrupt */ +#define nDMA1_INT 0x0 +#define DMA2_INT 0x4 /* DMA2 pending interrupt */ +#define nDMA2_INT 0x0 +#define DMA3_INT 0x8 /* DMA3 pending interrupt */ +#define nDMA3_INT 0x0 +#define DMA4_INT 0x10 /* DMA4 pending interrupt */ +#define nDMA4_INT 0x0 +#define DMA5_INT 0x20 /* DMA5 pending interrupt */ +#define nDMA5_INT 0x0 +#define DMA6_INT 0x40 /* DMA6 pending interrupt */ +#define nDMA6_INT 0x0 +#define DMA7_INT 0x80 /* DMA7 pending interrupt */ +#define nDMA7_INT 0x0 + +/* Bit masks for USB_DMAxCONTROL */ + +#define DMA_ENA 0x1 /* DMA enable */ +#define nDMA_ENA 0x0 +#define DIRECTION 0x2 /* direction of DMA transfer */ +#define nDIRECTION 0x0 +#define MODE 0x4 /* DMA Bus error */ +#define nMODE 0x0 +#define INT_ENA 0x8 /* Interrupt enable */ +#define nINT_ENA 0x0 +#define EPNUM 0xf0 /* EP number */ +#define BUSERROR 0x100 /* DMA Bus error */ +#define nBUSERROR 0x0 + +/* Bit masks for USB_DMAxADDRHIGH */ + +#define DMA_ADDR_HIGH 0xffff /* Upper 16-bits of memory source/destination address for the DMA master channel */ + +/* Bit masks for USB_DMAxADDRLOW */ + +#define DMA_ADDR_LOW 0xffff /* Lower 16-bits of memory source/destination address for the DMA master channel */ + +/* Bit masks for USB_DMAxCOUNTHIGH */ + +#define DMA_COUNT_HIGH 0xffff /* Upper 16-bits of byte count of DMA transfer for DMA master channel */ + +/* Bit masks for USB_DMAxCOUNTLOW */ + +#define DMA_COUNT_LOW 0xffff /* Lower 16-bits of byte count of DMA transfer for DMA master channel */ + + +/* ******************************************* */ +/* MULTI BIT MACRO ENUMERATIONS */ +/* ******************************************* */ + + +#endif /* _DEF_BF542_H */ diff --git a/include/asm-blackfin/mach-bf548/defBF544.h b/include/asm-blackfin/mach-bf548/defBF544.h new file mode 100644 index 00000000000000..8fc77ea12aa91a --- /dev/null +++ b/include/asm-blackfin/mach-bf548/defBF544.h @@ -0,0 +1,766 @@ +/* + * File: include/asm-blackfin/mach-bf548/defBF544.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _DEF_BF544_H +#define _DEF_BF544_H + +/* Include all Core registers and bit definitions */ +#include <asm/mach-common/def_LPBlackfin.h> + +/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF544 */ + +/* Include defBF54x_base.h for the set of #defines that are common to all ADSP-BF54x processors */ +#include "defBF54x_base.h" + +/* The following are the #defines needed by ADSP-BF544 that are not in the common header */ + +/* Timer Registers */ + +#define TIMER8_CONFIG 0xffc00600 /* Timer 8 Configuration Register */ +#define TIMER8_COUNTER 0xffc00604 /* Timer 8 Counter Register */ +#define TIMER8_PERIOD 0xffc00608 /* Timer 8 Period Register */ +#define TIMER8_WIDTH 0xffc0060c /* Timer 8 Width Register */ +#define TIMER9_CONFIG 0xffc00610 /* Timer 9 Configuration Register */ +#define TIMER9_COUNTER 0xffc00614 /* Timer 9 Counter Register */ +#define TIMER9_PERIOD 0xffc00618 /* Timer 9 Period Register */ +#define TIMER9_WIDTH 0xffc0061c /* Timer 9 Width Register */ +#define TIMER10_CONFIG 0xffc00620 /* Timer 10 Configuration Register */ +#define TIMER10_COUNTER 0xffc00624 /* Timer 10 Counter Register */ +#define TIMER10_PERIOD 0xffc00628 /* Timer 10 Period Register */ +#define TIMER10_WIDTH 0xffc0062c /* Timer 10 Width Register */ + +/* Timer Group of 3 Registers */ + +#define TIMER_ENABLE1 0xffc00640 /* Timer Group of 3 Enable Register */ +#define TIMER_DISABLE1 0xffc00644 /* Timer Group of 3 Disable Register */ +#define TIMER_STATUS1 0xffc00648 /* Timer Group of 3 Status Register */ + +/* EPPI0 Registers */ + +#define EPPI0_STATUS 0xffc01000 /* EPPI0 Status Register */ +#define EPPI0_HCOUNT 0xffc01004 /* EPPI0 Horizontal Transfer Count Register */ +#define EPPI0_HDELAY 0xffc01008 /* EPPI0 Horizontal Delay Count Register */ +#define EPPI0_VCOUNT 0xffc0100c /* EPPI0 Vertical Transfer Count Register */ +#define EPPI0_VDELAY 0xffc01010 /* EPPI0 Vertical Delay Count Register */ +#define EPPI0_FRAME 0xffc01014 /* EPPI0 Lines per Frame Register */ +#define EPPI0_LINE 0xffc01018 /* EPPI0 Samples per Line Register */ +#define EPPI0_CLKDIV 0xffc0101c /* EPPI0 Clock Divide Register */ +#define EPPI0_CONTROL 0xffc01020 /* EPPI0 Control Register */ +#define EPPI0_FS1W_HBL 0xffc01024 /* EPPI0 FS1 Width Register / EPPI0 Horizontal Blanking Samples Per Line Register */ +#define EPPI0_FS1P_AVPL 0xffc01028 /* EPPI0 FS1 Period Register / EPPI0 Active Video Samples Per Line Register */ +#define EPPI0_FS2W_LVB 0xffc0102c /* EPPI0 FS2 Width Register / EPPI0 Lines of Vertical Blanking Register */ +#define EPPI0_FS2P_LAVF 0xffc01030 /* EPPI0 FS2 Period Register/ EPPI0 Lines of Active Video Per Field Register */ +#define EPPI0_CLIP 0xffc01034 /* EPPI0 Clipping Register */ + +/* Two Wire Interface Registers (TWI1) */ + +#define TWI1_CLKDIV 0xffc02200 /* Clock Divider Register */ +#define TWI1_CONTROL 0xffc02204 /* TWI Control Register */ +#define TWI1_SLAVE_CTRL 0xffc02208 /* TWI Slave Mode Control Register */ +#define TWI1_SLAVE_STAT 0xffc0220c /* TWI Slave Mode Status Register */ +#define TWI1_SLAVE_ADDR 0xffc02210 /* TWI Slave Mode Address Register */ +#define TWI1_MASTER_CTRL 0xffc02214 /* TWI Master Mode Control Register */ +#define TWI1_MASTER_STAT 0xffc02218 /* TWI Master Mode Status Register */ +#define TWI1_MASTER_ADDR 0xffc0221c /* TWI Master Mode Address Register */ +#define TWI1_INT_STAT 0xffc02220 /* TWI Interrupt Status Register */ +#define TWI1_INT_MASK 0xffc02224 /* TWI Interrupt Mask Register */ +#define TWI1_FIFO_CTRL 0xffc02228 /* TWI FIFO Control Register */ +#define TWI1_FIFO_STAT 0xffc0222c /* TWI FIFO Status Register */ +#define TWI1_XMT_DATA8 0xffc02280 /* TWI FIFO Transmit Data Single Byte Register */ +#define TWI1_XMT_DATA16 0xffc02284 /* TWI FIFO Transmit Data Double Byte Register */ +#define TWI1_RCV_DATA8 0xffc02288 /* TWI FIFO Receive Data Single Byte Register */ +#define TWI1_RCV_DATA16 0xffc0228c /* TWI FIFO Receive Data Double Byte Register */ + +/* CAN Controller 1 Config 1 Registers */ + +#define CAN1_MC1 0xffc03200 /* CAN Controller 1 Mailbox Configuration Register 1 */ +#define CAN1_MD1 0xffc03204 /* CAN Controller 1 Mailbox Direction Register 1 */ +#define CAN1_TRS1 0xffc03208 /* CAN Controller 1 Transmit Request Set Register 1 */ +#define CAN1_TRR1 0xffc0320c /* CAN Controller 1 Transmit Request Reset Register 1 */ +#define CAN1_TA1 0xffc03210 /* CAN Controller 1 Transmit Acknowledge Register 1 */ +#define CAN1_AA1 0xffc03214 /* CAN Controller 1 Abort Acknowledge Register 1 */ +#define CAN1_RMP1 0xffc03218 /* CAN Controller 1 Receive Message Pending Register 1 */ +#define CAN1_RML1 0xffc0321c /* CAN Controller 1 Receive Message Lost Register 1 */ +#define CAN1_MBTIF1 0xffc03220 /* CAN Controller 1 Mailbox Transmit Interrupt Flag Register 1 */ +#define CAN1_MBRIF1 0xffc03224 /* CAN Controller 1 Mailbox Receive Interrupt Flag Register 1 */ +#define CAN1_MBIM1 0xffc03228 /* CAN Controller 1 Mailbox Interrupt Mask Register 1 */ +#define CAN1_RFH1 0xffc0322c /* CAN Controller 1 Remote Frame Handling Enable Register 1 */ +#define CAN1_OPSS1 0xffc03230 /* CAN Controller 1 Overwrite Protection Single Shot Transmit Register 1 */ + +/* CAN Controller 1 Config 2 Registers */ + +#define CAN1_MC2 0xffc03240 /* CAN Controller 1 Mailbox Configuration Register 2 */ +#define CAN1_MD2 0xffc03244 /* CAN Controller 1 Mailbox Direction Register 2 */ +#define CAN1_TRS2 0xffc03248 /* CAN Controller 1 Transmit Request Set Register 2 */ +#define CAN1_TRR2 0xffc0324c /* CAN Controller 1 Transmit Request Reset Register 2 */ +#define CAN1_TA2 0xffc03250 /* CAN Controller 1 Transmit Acknowledge Register 2 */ +#define CAN1_AA2 0xffc03254 /* CAN Controller 1 Abort Acknowledge Register 2 */ +#define CAN1_RMP2 0xffc03258 /* CAN Controller 1 Receive Message Pending Register 2 */ +#define CAN1_RML2 0xffc0325c /* CAN Controller 1 Receive Message Lost Register 2 */ +#define CAN1_MBTIF2 0xffc03260 /* CAN Controller 1 Mailbox Transmit Interrupt Flag Register 2 */ +#define CAN1_MBRIF2 0xffc03264 /* CAN Controller 1 Mailbox Receive Interrupt Flag Register 2 */ +#define CAN1_MBIM2 0xffc03268 /* CAN Controller 1 Mailbox Interrupt Mask Register 2 */ +#define CAN1_RFH2 0xffc0326c /* CAN Controller 1 Remote Frame Handling Enable Register 2 */ +#define CAN1_OPSS2 0xffc03270 /* CAN Controller 1 Overwrite Protection Single Shot Transmit Register 2 */ + +/* CAN Controller 1 Clock/Interrupt/Counter Registers */ + +#define CAN1_CLOCK 0xffc03280 /* CAN Controller 1 Clock Register */ +#define CAN1_TIMING 0xffc03284 /* CAN Controller 1 Timing Register */ +#define CAN1_DEBUG 0xffc03288 /* CAN Controller 1 Debug Register */ +#define CAN1_STATUS 0xffc0328c /* CAN Controller 1 Global Status Register */ +#define CAN1_CEC 0xffc03290 /* CAN Controller 1 Error Counter Register */ +#define CAN1_GIS 0xffc03294 /* CAN Controller 1 Global Interrupt Status Register */ +#define CAN1_GIM 0xffc03298 /* CAN Controller 1 Global Interrupt Mask Register */ +#define CAN1_GIF 0xffc0329c /* CAN Controller 1 Global Interrupt Flag Register */ +#define CAN1_CONTROL 0xffc032a0 /* CAN Controller 1 Master Control Register */ +#define CAN1_INTR 0xffc032a4 /* CAN Controller 1 Interrupt Pending Register */ +#define CAN1_MBTD 0xffc032ac /* CAN Controller 1 Mailbox Temporary Disable Register */ +#define CAN1_EWR 0xffc032b0 /* CAN Controller 1 Programmable Warning Level Register */ +#define CAN1_ESR 0xffc032b4 /* CAN Controller 1 Error Status Register */ +#define CAN1_UCCNT 0xffc032c4 /* CAN Controller 1 Universal Counter Register */ +#define CAN1_UCRC 0xffc032c8 /* CAN Controller 1 Universal Counter Force Reload Register */ +#define CAN1_UCCNF 0xffc032cc /* CAN Controller 1 Universal Counter Configuration Register */ + +/* CAN Controller 1 Mailbox Acceptance Registers */ + +#define CAN1_AM00L 0xffc03300 /* CAN Controller 1 Mailbox 0 Acceptance Mask High Register */ +#define CAN1_AM00H 0xffc03304 /* CAN Controller 1 Mailbox 0 Acceptance Mask Low Register */ +#define CAN1_AM01L 0xffc03308 /* CAN Controller 1 Mailbox 1 Acceptance Mask High Register */ +#define CAN1_AM01H 0xffc0330c /* CAN Controller 1 Mailbox 1 Acceptance Mask Low Register */ +#define CAN1_AM02L 0xffc03310 /* CAN Controller 1 Mailbox 2 Acceptance Mask High Register */ +#define CAN1_AM02H 0xffc03314 /* CAN Controller 1 Mailbox 2 Acceptance Mask Low Register */ +#define CAN1_AM03L 0xffc03318 /* CAN Controller 1 Mailbox 3 Acceptance Mask High Register */ +#define CAN1_AM03H 0xffc0331c /* CAN Controller 1 Mailbox 3 Acceptance Mask Low Register */ +#define CAN1_AM04L 0xffc03320 /* CAN Controller 1 Mailbox 4 Acceptance Mask High Register */ +#define CAN1_AM04H 0xffc03324 /* CAN Controller 1 Mailbox 4 Acceptance Mask Low Register */ +#define CAN1_AM05L 0xffc03328 /* CAN Controller 1 Mailbox 5 Acceptance Mask High Register */ +#define CAN1_AM05H 0xffc0332c /* CAN Controller 1 Mailbox 5 Acceptance Mask Low Register */ +#define CAN1_AM06L 0xffc03330 /* CAN Controller 1 Mailbox 6 Acceptance Mask High Register */ +#define CAN1_AM06H 0xffc03334 /* CAN Controller 1 Mailbox 6 Acceptance Mask Low Register */ +#define CAN1_AM07L 0xffc03338 /* CAN Controller 1 Mailbox 7 Acceptance Mask High Register */ +#define CAN1_AM07H 0xffc0333c /* CAN Controller 1 Mailbox 7 Acceptance Mask Low Register */ +#define CAN1_AM08L 0xffc03340 /* CAN Controller 1 Mailbox 8 Acceptance Mask High Register */ +#define CAN1_AM08H 0xffc03344 /* CAN Controller 1 Mailbox 8 Acceptance Mask Low Register */ +#define CAN1_AM09L 0xffc03348 /* CAN Controller 1 Mailbox 9 Acceptance Mask High Register */ +#define CAN1_AM09H 0xffc0334c /* CAN Controller 1 Mailbox 9 Acceptance Mask Low Register */ +#define CAN1_AM10L 0xffc03350 /* CAN Controller 1 Mailbox 10 Acceptance Mask High Register */ +#define CAN1_AM10H 0xffc03354 /* CAN Controller 1 Mailbox 10 Acceptance Mask Low Register */ +#define CAN1_AM11L 0xffc03358 /* CAN Controller 1 Mailbox 11 Acceptance Mask High Register */ +#define CAN1_AM11H 0xffc0335c /* CAN Controller 1 Mailbox 11 Acceptance Mask Low Register */ +#define CAN1_AM12L 0xffc03360 /* CAN Controller 1 Mailbox 12 Acceptance Mask High Register */ +#define CAN1_AM12H 0xffc03364 /* CAN Controller 1 Mailbox 12 Acceptance Mask Low Register */ +#define CAN1_AM13L 0xffc03368 /* CAN Controller 1 Mailbox 13 Acceptance Mask High Register */ +#define CAN1_AM13H 0xffc0336c /* CAN Controller 1 Mailbox 13 Acceptance Mask Low Register */ +#define CAN1_AM14L 0xffc03370 /* CAN Controller 1 Mailbox 14 Acceptance Mask High Register */ +#define CAN1_AM14H 0xffc03374 /* CAN Controller 1 Mailbox 14 Acceptance Mask Low Register */ +#define CAN1_AM15L 0xffc03378 /* CAN Controller 1 Mailbox 15 Acceptance Mask High Register */ +#define CAN1_AM15H 0xffc0337c /* CAN Controller 1 Mailbox 15 Acceptance Mask Low Register */ + +/* CAN Controller 1 Mailbox Acceptance Registers */ + +#define CAN1_AM16L 0xffc03380 /* CAN Controller 1 Mailbox 16 Acceptance Mask High Register */ +#define CAN1_AM16H 0xffc03384 /* CAN Controller 1 Mailbox 16 Acceptance Mask Low Register */ +#define CAN1_AM17L 0xffc03388 /* CAN Controller 1 Mailbox 17 Acceptance Mask High Register */ +#define CAN1_AM17H 0xffc0338c /* CAN Controller 1 Mailbox 17 Acceptance Mask Low Register */ +#define CAN1_AM18L 0xffc03390 /* CAN Controller 1 Mailbox 18 Acceptance Mask High Register */ +#define CAN1_AM18H 0xffc03394 /* CAN Controller 1 Mailbox 18 Acceptance Mask Low Register */ +#define CAN1_AM19L 0xffc03398 /* CAN Controller 1 Mailbox 19 Acceptance Mask High Register */ +#define CAN1_AM19H 0xffc0339c /* CAN Controller 1 Mailbox 19 Acceptance Mask Low Register */ +#define CAN1_AM20L 0xffc033a0 /* CAN Controller 1 Mailbox 20 Acceptance Mask High Register */ +#define CAN1_AM20H 0xffc033a4 /* CAN Controller 1 Mailbox 20 Acceptance Mask Low Register */ +#define CAN1_AM21L 0xffc033a8 /* CAN Controller 1 Mailbox 21 Acceptance Mask High Register */ +#define CAN1_AM21H 0xffc033ac /* CAN Controller 1 Mailbox 21 Acceptance Mask Low Register */ +#define CAN1_AM22L 0xffc033b0 /* CAN Controller 1 Mailbox 22 Acceptance Mask High Register */ +#define CAN1_AM22H 0xffc033b4 /* CAN Controller 1 Mailbox 22 Acceptance Mask Low Register */ +#define CAN1_AM23L 0xffc033b8 /* CAN Controller 1 Mailbox 23 Acceptance Mask High Register */ +#define CAN1_AM23H 0xffc033bc /* CAN Controller 1 Mailbox 23 Acceptance Mask Low Register */ +#define CAN1_AM24L 0xffc033c0 /* CAN Controller 1 Mailbox 24 Acceptance Mask High Register */ +#define CAN1_AM24H 0xffc033c4 /* CAN Controller 1 Mailbox 24 Acceptance Mask Low Register */ +#define CAN1_AM25L 0xffc033c8 /* CAN Controller 1 Mailbox 25 Acceptance Mask High Register */ +#define CAN1_AM25H 0xffc033cc /* CAN Controller 1 Mailbox 25 Acceptance Mask Low Register */ +#define CAN1_AM26L 0xffc033d0 /* CAN Controller 1 Mailbox 26 Acceptance Mask High Register */ +#define CAN1_AM26H 0xffc033d4 /* CAN Controller 1 Mailbox 26 Acceptance Mask Low Register */ +#define CAN1_AM27L 0xffc033d8 /* CAN Controller 1 Mailbox 27 Acceptance Mask High Register */ +#define CAN1_AM27H 0xffc033dc /* CAN Controller 1 Mailbox 27 Acceptance Mask Low Register */ +#define CAN1_AM28L 0xffc033e0 /* CAN Controller 1 Mailbox 28 Acceptance Mask High Register */ +#define CAN1_AM28H 0xffc033e4 /* CAN Controller 1 Mailbox 28 Acceptance Mask Low Register */ +#define CAN1_AM29L 0xffc033e8 /* CAN Controller 1 Mailbox 29 Acceptance Mask High Register */ +#define CAN1_AM29H 0xffc033ec /* CAN Controller 1 Mailbox 29 Acceptance Mask Low Register */ +#define CAN1_AM30L 0xffc033f0 /* CAN Controller 1 Mailbox 30 Acceptance Mask High Register */ +#define CAN1_AM30H 0xffc033f4 /* CAN Controller 1 Mailbox 30 Acceptance Mask Low Register */ +#define CAN1_AM31L 0xffc033f8 /* CAN Controller 1 Mailbox 31 Acceptance Mask High Register */ +#define CAN1_AM31H 0xffc033fc /* CAN Controller 1 Mailbox 31 Acceptance Mask Low Register */ + +/* CAN Controller 1 Mailbox Data Registers */ + +#define CAN1_MB00_DATA0 0xffc03400 /* CAN Controller 1 Mailbox 0 Data 0 Register */ +#define CAN1_MB00_DATA1 0xffc03404 /* CAN Controller 1 Mailbox 0 Data 1 Register */ +#define CAN1_MB00_DATA2 0xffc03408 /* CAN Controller 1 Mailbox 0 Data 2 Register */ +#define CAN1_MB00_DATA3 0xffc0340c /* CAN Controller 1 Mailbox 0 Data 3 Register */ +#define CAN1_MB00_LENGTH 0xffc03410 /* CAN Controller 1 Mailbox 0 Length Register */ +#define CAN1_MB00_TIMESTAMP 0xffc03414 /* CAN Controller 1 Mailbox 0 Timestamp Register */ +#define CAN1_MB00_ID0 0xffc03418 /* CAN Controller 1 Mailbox 0 ID0 Register */ +#define CAN1_MB00_ID1 0xffc0341c /* CAN Controller 1 Mailbox 0 ID1 Register */ +#define CAN1_MB01_DATA0 0xffc03420 /* CAN Controller 1 Mailbox 1 Data 0 Register */ +#define CAN1_MB01_DATA1 0xffc03424 /* CAN Controller 1 Mailbox 1 Data 1 Register */ +#define CAN1_MB01_DATA2 0xffc03428 /* CAN Controller 1 Mailbox 1 Data 2 Register */ +#define CAN1_MB01_DATA3 0xffc0342c /* CAN Controller 1 Mailbox 1 Data 3 Register */ +#define CAN1_MB01_LENGTH 0xffc03430 /* CAN Controller 1 Mailbox 1 Length Register */ +#define CAN1_MB01_TIMESTAMP 0xffc03434 /* CAN Controller 1 Mailbox 1 Timestamp Register */ +#define CAN1_MB01_ID0 0xffc03438 /* CAN Controller 1 Mailbox 1 ID0 Register */ +#define CAN1_MB01_ID1 0xffc0343c /* CAN Controller 1 Mailbox 1 ID1 Register */ +#define CAN1_MB02_DATA0 0xffc03440 /* CAN Controller 1 Mailbox 2 Data 0 Register */ +#define CAN1_MB02_DATA1 0xffc03444 /* CAN Controller 1 Mailbox 2 Data 1 Register */ +#define CAN1_MB02_DATA2 0xffc03448 /* CAN Controller 1 Mailbox 2 Data 2 Register */ +#define CAN1_MB02_DATA3 0xffc0344c /* CAN Controller 1 Mailbox 2 Data 3 Register */ +#define CAN1_MB02_LENGTH 0xffc03450 /* CAN Controller 1 Mailbox 2 Length Register */ +#define CAN1_MB02_TIMESTAMP 0xffc03454 /* CAN Controller 1 Mailbox 2 Timestamp Register */ +#define CAN1_MB02_ID0 0xffc03458 /* CAN Controller 1 Mailbox 2 ID0 Register */ +#define CAN1_MB02_ID1 0xffc0345c /* CAN Controller 1 Mailbox 2 ID1 Register */ +#define CAN1_MB03_DATA0 0xffc03460 /* CAN Controller 1 Mailbox 3 Data 0 Register */ +#define CAN1_MB03_DATA1 0xffc03464 /* CAN Controller 1 Mailbox 3 Data 1 Register */ +#define CAN1_MB03_DATA2 0xffc03468 /* CAN Controller 1 Mailbox 3 Data 2 Register */ +#define CAN1_MB03_DATA3 0xffc0346c /* CAN Controller 1 Mailbox 3 Data 3 Register */ +#define CAN1_MB03_LENGTH 0xffc03470 /* CAN Controller 1 Mailbox 3 Length Register */ +#define CAN1_MB03_TIMESTAMP 0xffc03474 /* CAN Controller 1 Mailbox 3 Timestamp Register */ +#define CAN1_MB03_ID0 0xffc03478 /* CAN Controller 1 Mailbox 3 ID0 Register */ +#define CAN1_MB03_ID1 0xffc0347c /* CAN Controller 1 Mailbox 3 ID1 Register */ +#define CAN1_MB04_DATA0 0xffc03480 /* CAN Controller 1 Mailbox 4 Data 0 Register */ +#define CAN1_MB04_DATA1 0xffc03484 /* CAN Controller 1 Mailbox 4 Data 1 Register */ +#define CAN1_MB04_DATA2 0xffc03488 /* CAN Controller 1 Mailbox 4 Data 2 Register */ +#define CAN1_MB04_DATA3 0xffc0348c /* CAN Controller 1 Mailbox 4 Data 3 Register */ +#define CAN1_MB04_LENGTH 0xffc03490 /* CAN Controller 1 Mailbox 4 Length Register */ +#define CAN1_MB04_TIMESTAMP 0xffc03494 /* CAN Controller 1 Mailbox 4 Timestamp Register */ +#define CAN1_MB04_ID0 0xffc03498 /* CAN Controller 1 Mailbox 4 ID0 Register */ +#define CAN1_MB04_ID1 0xffc0349c /* CAN Controller 1 Mailbox 4 ID1 Register */ +#define CAN1_MB05_DATA0 0xffc034a0 /* CAN Controller 1 Mailbox 5 Data 0 Register */ +#define CAN1_MB05_DATA1 0xffc034a4 /* CAN Controller 1 Mailbox 5 Data 1 Register */ +#define CAN1_MB05_DATA2 0xffc034a8 /* CAN Controller 1 Mailbox 5 Data 2 Register */ +#define CAN1_MB05_DATA3 0xffc034ac /* CAN Controller 1 Mailbox 5 Data 3 Register */ +#define CAN1_MB05_LENGTH 0xffc034b0 /* CAN Controller 1 Mailbox 5 Length Register */ +#define CAN1_MB05_TIMESTAMP 0xffc034b4 /* CAN Controller 1 Mailbox 5 Timestamp Register */ +#define CAN1_MB05_ID0 0xffc034b8 /* CAN Controller 1 Mailbox 5 ID0 Register */ +#define CAN1_MB05_ID1 0xffc034bc /* CAN Controller 1 Mailbox 5 ID1 Register */ +#define CAN1_MB06_DATA0 0xffc034c0 /* CAN Controller 1 Mailbox 6 Data 0 Register */ +#define CAN1_MB06_DATA1 0xffc034c4 /* CAN Controller 1 Mailbox 6 Data 1 Register */ +#define CAN1_MB06_DATA2 0xffc034c8 /* CAN Controller 1 Mailbox 6 Data 2 Register */ +#define CAN1_MB06_DATA3 0xffc034cc /* CAN Controller 1 Mailbox 6 Data 3 Register */ +#define CAN1_MB06_LENGTH 0xffc034d0 /* CAN Controller 1 Mailbox 6 Length Register */ +#define CAN1_MB06_TIMESTAMP 0xffc034d4 /* CAN Controller 1 Mailbox 6 Timestamp Register */ +#define CAN1_MB06_ID0 0xffc034d8 /* CAN Controller 1 Mailbox 6 ID0 Register */ +#define CAN1_MB06_ID1 0xffc034dc /* CAN Controller 1 Mailbox 6 ID1 Register */ +#define CAN1_MB07_DATA0 0xffc034e0 /* CAN Controller 1 Mailbox 7 Data 0 Register */ +#define CAN1_MB07_DATA1 0xffc034e4 /* CAN Controller 1 Mailbox 7 Data 1 Register */ +#define CAN1_MB07_DATA2 0xffc034e8 /* CAN Controller 1 Mailbox 7 Data 2 Register */ +#define CAN1_MB07_DATA3 0xffc034ec /* CAN Controller 1 Mailbox 7 Data 3 Register */ +#define CAN1_MB07_LENGTH 0xffc034f0 /* CAN Controller 1 Mailbox 7 Length Register */ +#define CAN1_MB07_TIMESTAMP 0xffc034f4 /* CAN Controller 1 Mailbox 7 Timestamp Register */ +#define CAN1_MB07_ID0 0xffc034f8 /* CAN Controller 1 Mailbox 7 ID0 Register */ +#define CAN1_MB07_ID1 0xffc034fc /* CAN Controller 1 Mailbox 7 ID1 Register */ +#define CAN1_MB08_DATA0 0xffc03500 /* CAN Controller 1 Mailbox 8 Data 0 Register */ +#define CAN1_MB08_DATA1 0xffc03504 /* CAN Controller 1 Mailbox 8 Data 1 Register */ +#define CAN1_MB08_DATA2 0xffc03508 /* CAN Controller 1 Mailbox 8 Data 2 Register */ +#define CAN1_MB08_DATA3 0xffc0350c /* CAN Controller 1 Mailbox 8 Data 3 Register */ +#define CAN1_MB08_LENGTH 0xffc03510 /* CAN Controller 1 Mailbox 8 Length Register */ +#define CAN1_MB08_TIMESTAMP 0xffc03514 /* CAN Controller 1 Mailbox 8 Timestamp Register */ +#define CAN1_MB08_ID0 0xffc03518 /* CAN Controller 1 Mailbox 8 ID0 Register */ +#define CAN1_MB08_ID1 0xffc0351c /* CAN Controller 1 Mailbox 8 ID1 Register */ +#define CAN1_MB09_DATA0 0xffc03520 /* CAN Controller 1 Mailbox 9 Data 0 Register */ +#define CAN1_MB09_DATA1 0xffc03524 /* CAN Controller 1 Mailbox 9 Data 1 Register */ +#define CAN1_MB09_DATA2 0xffc03528 /* CAN Controller 1 Mailbox 9 Data 2 Register */ +#define CAN1_MB09_DATA3 0xffc0352c /* CAN Controller 1 Mailbox 9 Data 3 Register */ +#define CAN1_MB09_LENGTH 0xffc03530 /* CAN Controller 1 Mailbox 9 Length Register */ +#define CAN1_MB09_TIMESTAMP 0xffc03534 /* CAN Controller 1 Mailbox 9 Timestamp Register */ +#define CAN1_MB09_ID0 0xffc03538 /* CAN Controller 1 Mailbox 9 ID0 Register */ +#define CAN1_MB09_ID1 0xffc0353c /* CAN Controller 1 Mailbox 9 ID1 Register */ +#define CAN1_MB10_DATA0 0xffc03540 /* CAN Controller 1 Mailbox 10 Data 0 Register */ +#define CAN1_MB10_DATA1 0xffc03544 /* CAN Controller 1 Mailbox 10 Data 1 Register */ +#define CAN1_MB10_DATA2 0xffc03548 /* CAN Controller 1 Mailbox 10 Data 2 Register */ +#define CAN1_MB10_DATA3 0xffc0354c /* CAN Controller 1 Mailbox 10 Data 3 Register */ +#define CAN1_MB10_LENGTH 0xffc03550 /* CAN Controller 1 Mailbox 10 Length Register */ +#define CAN1_MB10_TIMESTAMP 0xffc03554 /* CAN Controller 1 Mailbox 10 Timestamp Register */ +#define CAN1_MB10_ID0 0xffc03558 /* CAN Controller 1 Mailbox 10 ID0 Register */ +#define CAN1_MB10_ID1 0xffc0355c /* CAN Controller 1 Mailbox 10 ID1 Register */ +#define CAN1_MB11_DATA0 0xffc03560 /* CAN Controller 1 Mailbox 11 Data 0 Register */ +#define CAN1_MB11_DATA1 0xffc03564 /* CAN Controller 1 Mailbox 11 Data 1 Register */ +#define CAN1_MB11_DATA2 0xffc03568 /* CAN Controller 1 Mailbox 11 Data 2 Register */ +#define CAN1_MB11_DATA3 0xffc0356c /* CAN Controller 1 Mailbox 11 Data 3 Register */ +#define CAN1_MB11_LENGTH 0xffc03570 /* CAN Controller 1 Mailbox 11 Length Register */ +#define CAN1_MB11_TIMESTAMP 0xffc03574 /* CAN Controller 1 Mailbox 11 Timestamp Register */ +#define CAN1_MB11_ID0 0xffc03578 /* CAN Controller 1 Mailbox 11 ID0 Register */ +#define CAN1_MB11_ID1 0xffc0357c /* CAN Controller 1 Mailbox 11 ID1 Register */ +#define CAN1_MB12_DATA0 0xffc03580 /* CAN Controller 1 Mailbox 12 Data 0 Register */ +#define CAN1_MB12_DATA1 0xffc03584 /* CAN Controller 1 Mailbox 12 Data 1 Register */ +#define CAN1_MB12_DATA2 0xffc03588 /* CAN Controller 1 Mailbox 12 Data 2 Register */ +#define CAN1_MB12_DATA3 0xffc0358c /* CAN Controller 1 Mailbox 12 Data 3 Register */ +#define CAN1_MB12_LENGTH 0xffc03590 /* CAN Controller 1 Mailbox 12 Length Register */ +#define CAN1_MB12_TIMESTAMP 0xffc03594 /* CAN Controller 1 Mailbox 12 Timestamp Register */ +#define CAN1_MB12_ID0 0xffc03598 /* CAN Controller 1 Mailbox 12 ID0 Register */ +#define CAN1_MB12_ID1 0xffc0359c /* CAN Controller 1 Mailbox 12 ID1 Register */ +#define CAN1_MB13_DATA0 0xffc035a0 /* CAN Controller 1 Mailbox 13 Data 0 Register */ +#define CAN1_MB13_DATA1 0xffc035a4 /* CAN Controller 1 Mailbox 13 Data 1 Register */ +#define CAN1_MB13_DATA2 0xffc035a8 /* CAN Controller 1 Mailbox 13 Data 2 Register */ +#define CAN1_MB13_DATA3 0xffc035ac /* CAN Controller 1 Mailbox 13 Data 3 Register */ +#define CAN1_MB13_LENGTH 0xffc035b0 /* CAN Controller 1 Mailbox 13 Length Register */ +#define CAN1_MB13_TIMESTAMP 0xffc035b4 /* CAN Controller 1 Mailbox 13 Timestamp Register */ +#define CAN1_MB13_ID0 0xffc035b8 /* CAN Controller 1 Mailbox 13 ID0 Register */ +#define CAN1_MB13_ID1 0xffc035bc /* CAN Controller 1 Mailbox 13 ID1 Register */ +#define CAN1_MB14_DATA0 0xffc035c0 /* CAN Controller 1 Mailbox 14 Data 0 Register */ +#define CAN1_MB14_DATA1 0xffc035c4 /* CAN Controller 1 Mailbox 14 Data 1 Register */ +#define CAN1_MB14_DATA2 0xffc035c8 /* CAN Controller 1 Mailbox 14 Data 2 Register */ +#define CAN1_MB14_DATA3 0xffc035cc /* CAN Controller 1 Mailbox 14 Data 3 Register */ +#define CAN1_MB14_LENGTH 0xffc035d0 /* CAN Controller 1 Mailbox 14 Length Register */ +#define CAN1_MB14_TIMESTAMP 0xffc035d4 /* CAN Controller 1 Mailbox 14 Timestamp Register */ +#define CAN1_MB14_ID0 0xffc035d8 /* CAN Controller 1 Mailbox 14 ID0 Register */ +#define CAN1_MB14_ID1 0xffc035dc /* CAN Controller 1 Mailbox 14 ID1 Register */ +#define CAN1_MB15_DATA0 0xffc035e0 /* CAN Controller 1 Mailbox 15 Data 0 Register */ +#define CAN1_MB15_DATA1 0xffc035e4 /* CAN Controller 1 Mailbox 15 Data 1 Register */ +#define CAN1_MB15_DATA2 0xffc035e8 /* CAN Controller 1 Mailbox 15 Data 2 Register */ +#define CAN1_MB15_DATA3 0xffc035ec /* CAN Controller 1 Mailbox 15 Data 3 Register */ +#define CAN1_MB15_LENGTH 0xffc035f0 /* CAN Controller 1 Mailbox 15 Length Register */ +#define CAN1_MB15_TIMESTAMP 0xffc035f4 /* CAN Controller 1 Mailbox 15 Timestamp Register */ +#define CAN1_MB15_ID0 0xffc035f8 /* CAN Controller 1 Mailbox 15 ID0 Register */ +#define CAN1_MB15_ID1 0xffc035fc /* CAN Controller 1 Mailbox 15 ID1 Register */ + +/* CAN Controller 1 Mailbox Data Registers */ + +#define CAN1_MB16_DATA0 0xffc03600 /* CAN Controller 1 Mailbox 16 Data 0 Register */ +#define CAN1_MB16_DATA1 0xffc03604 /* CAN Controller 1 Mailbox 16 Data 1 Register */ +#define CAN1_MB16_DATA2 0xffc03608 /* CAN Controller 1 Mailbox 16 Data 2 Register */ +#define CAN1_MB16_DATA3 0xffc0360c /* CAN Controller 1 Mailbox 16 Data 3 Register */ +#define CAN1_MB16_LENGTH 0xffc03610 /* CAN Controller 1 Mailbox 16 Length Register */ +#define CAN1_MB16_TIMESTAMP 0xffc03614 /* CAN Controller 1 Mailbox 16 Timestamp Register */ +#define CAN1_MB16_ID0 0xffc03618 /* CAN Controller 1 Mailbox 16 ID0 Register */ +#define CAN1_MB16_ID1 0xffc0361c /* CAN Controller 1 Mailbox 16 ID1 Register */ +#define CAN1_MB17_DATA0 0xffc03620 /* CAN Controller 1 Mailbox 17 Data 0 Register */ +#define CAN1_MB17_DATA1 0xffc03624 /* CAN Controller 1 Mailbox 17 Data 1 Register */ +#define CAN1_MB17_DATA2 0xffc03628 /* CAN Controller 1 Mailbox 17 Data 2 Register */ +#define CAN1_MB17_DATA3 0xffc0362c /* CAN Controller 1 Mailbox 17 Data 3 Register */ +#define CAN1_MB17_LENGTH 0xffc03630 /* CAN Controller 1 Mailbox 17 Length Register */ +#define CAN1_MB17_TIMESTAMP 0xffc03634 /* CAN Controller 1 Mailbox 17 Timestamp Register */ +#define CAN1_MB17_ID0 0xffc03638 /* CAN Controller 1 Mailbox 17 ID0 Register */ +#define CAN1_MB17_ID1 0xffc0363c /* CAN Controller 1 Mailbox 17 ID1 Register */ +#define CAN1_MB18_DATA0 0xffc03640 /* CAN Controller 1 Mailbox 18 Data 0 Register */ +#define CAN1_MB18_DATA1 0xffc03644 /* CAN Controller 1 Mailbox 18 Data 1 Register */ +#define CAN1_MB18_DATA2 0xffc03648 /* CAN Controller 1 Mailbox 18 Data 2 Register */ +#define CAN1_MB18_DATA3 0xffc0364c /* CAN Controller 1 Mailbox 18 Data 3 Register */ +#define CAN1_MB18_LENGTH 0xffc03650 /* CAN Controller 1 Mailbox 18 Length Register */ +#define CAN1_MB18_TIMESTAMP 0xffc03654 /* CAN Controller 1 Mailbox 18 Timestamp Register */ +#define CAN1_MB18_ID0 0xffc03658 /* CAN Controller 1 Mailbox 18 ID0 Register */ +#define CAN1_MB18_ID1 0xffc0365c /* CAN Controller 1 Mailbox 18 ID1 Register */ +#define CAN1_MB19_DATA0 0xffc03660 /* CAN Controller 1 Mailbox 19 Data 0 Register */ +#define CAN1_MB19_DATA1 0xffc03664 /* CAN Controller 1 Mailbox 19 Data 1 Register */ +#define CAN1_MB19_DATA2 0xffc03668 /* CAN Controller 1 Mailbox 19 Data 2 Register */ +#define CAN1_MB19_DATA3 0xffc0366c /* CAN Controller 1 Mailbox 19 Data 3 Register */ +#define CAN1_MB19_LENGTH 0xffc03670 /* CAN Controller 1 Mailbox 19 Length Register */ +#define CAN1_MB19_TIMESTAMP 0xffc03674 /* CAN Controller 1 Mailbox 19 Timestamp Register */ +#define CAN1_MB19_ID0 0xffc03678 /* CAN Controller 1 Mailbox 19 ID0 Register */ +#define CAN1_MB19_ID1 0xffc0367c /* CAN Controller 1 Mailbox 19 ID1 Register */ +#define CAN1_MB20_DATA0 0xffc03680 /* CAN Controller 1 Mailbox 20 Data 0 Register */ +#define CAN1_MB20_DATA1 0xffc03684 /* CAN Controller 1 Mailbox 20 Data 1 Register */ +#define CAN1_MB20_DATA2 0xffc03688 /* CAN Controller 1 Mailbox 20 Data 2 Register */ +#define CAN1_MB20_DATA3 0xffc0368c /* CAN Controller 1 Mailbox 20 Data 3 Register */ +#define CAN1_MB20_LENGTH 0xffc03690 /* CAN Controller 1 Mailbox 20 Length Register */ +#define CAN1_MB20_TIMESTAMP 0xffc03694 /* CAN Controller 1 Mailbox 20 Timestamp Register */ +#define CAN1_MB20_ID0 0xffc03698 /* CAN Controller 1 Mailbox 20 ID0 Register */ +#define CAN1_MB20_ID1 0xffc0369c /* CAN Controller 1 Mailbox 20 ID1 Register */ +#define CAN1_MB21_DATA0 0xffc036a0 /* CAN Controller 1 Mailbox 21 Data 0 Register */ +#define CAN1_MB21_DATA1 0xffc036a4 /* CAN Controller 1 Mailbox 21 Data 1 Register */ +#define CAN1_MB21_DATA2 0xffc036a8 /* CAN Controller 1 Mailbox 21 Data 2 Register */ +#define CAN1_MB21_DATA3 0xffc036ac /* CAN Controller 1 Mailbox 21 Data 3 Register */ +#define CAN1_MB21_LENGTH 0xffc036b0 /* CAN Controller 1 Mailbox 21 Length Register */ +#define CAN1_MB21_TIMESTAMP 0xffc036b4 /* CAN Controller 1 Mailbox 21 Timestamp Register */ +#define CAN1_MB21_ID0 0xffc036b8 /* CAN Controller 1 Mailbox 21 ID0 Register */ +#define CAN1_MB21_ID1 0xffc036bc /* CAN Controller 1 Mailbox 21 ID1 Register */ +#define CAN1_MB22_DATA0 0xffc036c0 /* CAN Controller 1 Mailbox 22 Data 0 Register */ +#define CAN1_MB22_DATA1 0xffc036c4 /* CAN Controller 1 Mailbox 22 Data 1 Register */ +#define CAN1_MB22_DATA2 0xffc036c8 /* CAN Controller 1 Mailbox 22 Data 2 Register */ +#define CAN1_MB22_DATA3 0xffc036cc /* CAN Controller 1 Mailbox 22 Data 3 Register */ +#define CAN1_MB22_LENGTH 0xffc036d0 /* CAN Controller 1 Mailbox 22 Length Register */ +#define CAN1_MB22_TIMESTAMP 0xffc036d4 /* CAN Controller 1 Mailbox 22 Timestamp Register */ +#define CAN1_MB22_ID0 0xffc036d8 /* CAN Controller 1 Mailbox 22 ID0 Register */ +#define CAN1_MB22_ID1 0xffc036dc /* CAN Controller 1 Mailbox 22 ID1 Register */ +#define CAN1_MB23_DATA0 0xffc036e0 /* CAN Controller 1 Mailbox 23 Data 0 Register */ +#define CAN1_MB23_DATA1 0xffc036e4 /* CAN Controller 1 Mailbox 23 Data 1 Register */ +#define CAN1_MB23_DATA2 0xffc036e8 /* CAN Controller 1 Mailbox 23 Data 2 Register */ +#define CAN1_MB23_DATA3 0xffc036ec /* CAN Controller 1 Mailbox 23 Data 3 Register */ +#define CAN1_MB23_LENGTH 0xffc036f0 /* CAN Controller 1 Mailbox 23 Length Register */ +#define CAN1_MB23_TIMESTAMP 0xffc036f4 /* CAN Controller 1 Mailbox 23 Timestamp Register */ +#define CAN1_MB23_ID0 0xffc036f8 /* CAN Controller 1 Mailbox 23 ID0 Register */ +#define CAN1_MB23_ID1 0xffc036fc /* CAN Controller 1 Mailbox 23 ID1 Register */ +#define CAN1_MB24_DATA0 0xffc03700 /* CAN Controller 1 Mailbox 24 Data 0 Register */ +#define CAN1_MB24_DATA1 0xffc03704 /* CAN Controller 1 Mailbox 24 Data 1 Register */ +#define CAN1_MB24_DATA2 0xffc03708 /* CAN Controller 1 Mailbox 24 Data 2 Register */ +#define CAN1_MB24_DATA3 0xffc0370c /* CAN Controller 1 Mailbox 24 Data 3 Register */ +#define CAN1_MB24_LENGTH 0xffc03710 /* CAN Controller 1 Mailbox 24 Length Register */ +#define CAN1_MB24_TIMESTAMP 0xffc03714 /* CAN Controller 1 Mailbox 24 Timestamp Register */ +#define CAN1_MB24_ID0 0xffc03718 /* CAN Controller 1 Mailbox 24 ID0 Register */ +#define CAN1_MB24_ID1 0xffc0371c /* CAN Controller 1 Mailbox 24 ID1 Register */ +#define CAN1_MB25_DATA0 0xffc03720 /* CAN Controller 1 Mailbox 25 Data 0 Register */ +#define CAN1_MB25_DATA1 0xffc03724 /* CAN Controller 1 Mailbox 25 Data 1 Register */ +#define CAN1_MB25_DATA2 0xffc03728 /* CAN Controller 1 Mailbox 25 Data 2 Register */ +#define CAN1_MB25_DATA3 0xffc0372c /* CAN Controller 1 Mailbox 25 Data 3 Register */ +#define CAN1_MB25_LENGTH 0xffc03730 /* CAN Controller 1 Mailbox 25 Length Register */ +#define CAN1_MB25_TIMESTAMP 0xffc03734 /* CAN Controller 1 Mailbox 25 Timestamp Register */ +#define CAN1_MB25_ID0 0xffc03738 /* CAN Controller 1 Mailbox 25 ID0 Register */ +#define CAN1_MB25_ID1 0xffc0373c /* CAN Controller 1 Mailbox 25 ID1 Register */ +#define CAN1_MB26_DATA0 0xffc03740 /* CAN Controller 1 Mailbox 26 Data 0 Register */ +#define CAN1_MB26_DATA1 0xffc03744 /* CAN Controller 1 Mailbox 26 Data 1 Register */ +#define CAN1_MB26_DATA2 0xffc03748 /* CAN Controller 1 Mailbox 26 Data 2 Register */ +#define CAN1_MB26_DATA3 0xffc0374c /* CAN Controller 1 Mailbox 26 Data 3 Register */ +#define CAN1_MB26_LENGTH 0xffc03750 /* CAN Controller 1 Mailbox 26 Length Register */ +#define CAN1_MB26_TIMESTAMP 0xffc03754 /* CAN Controller 1 Mailbox 26 Timestamp Register */ +#define CAN1_MB26_ID0 0xffc03758 /* CAN Controller 1 Mailbox 26 ID0 Register */ +#define CAN1_MB26_ID1 0xffc0375c /* CAN Controller 1 Mailbox 26 ID1 Register */ +#define CAN1_MB27_DATA0 0xffc03760 /* CAN Controller 1 Mailbox 27 Data 0 Register */ +#define CAN1_MB27_DATA1 0xffc03764 /* CAN Controller 1 Mailbox 27 Data 1 Register */ +#define CAN1_MB27_DATA2 0xffc03768 /* CAN Controller 1 Mailbox 27 Data 2 Register */ +#define CAN1_MB27_DATA3 0xffc0376c /* CAN Controller 1 Mailbox 27 Data 3 Register */ +#define CAN1_MB27_LENGTH 0xffc03770 /* CAN Controller 1 Mailbox 27 Length Register */ +#define CAN1_MB27_TIMESTAMP 0xffc03774 /* CAN Controller 1 Mailbox 27 Timestamp Register */ +#define CAN1_MB27_ID0 0xffc03778 /* CAN Controller 1 Mailbox 27 ID0 Register */ +#define CAN1_MB27_ID1 0xffc0377c /* CAN Controller 1 Mailbox 27 ID1 Register */ +#define CAN1_MB28_DATA0 0xffc03780 /* CAN Controller 1 Mailbox 28 Data 0 Register */ +#define CAN1_MB28_DATA1 0xffc03784 /* CAN Controller 1 Mailbox 28 Data 1 Register */ +#define CAN1_MB28_DATA2 0xffc03788 /* CAN Controller 1 Mailbox 28 Data 2 Register */ +#define CAN1_MB28_DATA3 0xffc0378c /* CAN Controller 1 Mailbox 28 Data 3 Register */ +#define CAN1_MB28_LENGTH 0xffc03790 /* CAN Controller 1 Mailbox 28 Length Register */ +#define CAN1_MB28_TIMESTAMP 0xffc03794 /* CAN Controller 1 Mailbox 28 Timestamp Register */ +#define CAN1_MB28_ID0 0xffc03798 /* CAN Controller 1 Mailbox 28 ID0 Register */ +#define CAN1_MB28_ID1 0xffc0379c /* CAN Controller 1 Mailbox 28 ID1 Register */ +#define CAN1_MB29_DATA0 0xffc037a0 /* CAN Controller 1 Mailbox 29 Data 0 Register */ +#define CAN1_MB29_DATA1 0xffc037a4 /* CAN Controller 1 Mailbox 29 Data 1 Register */ +#define CAN1_MB29_DATA2 0xffc037a8 /* CAN Controller 1 Mailbox 29 Data 2 Register */ +#define CAN1_MB29_DATA3 0xffc037ac /* CAN Controller 1 Mailbox 29 Data 3 Register */ +#define CAN1_MB29_LENGTH 0xffc037b0 /* CAN Controller 1 Mailbox 29 Length Register */ +#define CAN1_MB29_TIMESTAMP 0xffc037b4 /* CAN Controller 1 Mailbox 29 Timestamp Register */ +#define CAN1_MB29_ID0 0xffc037b8 /* CAN Controller 1 Mailbox 29 ID0 Register */ +#define CAN1_MB29_ID1 0xffc037bc /* CAN Controller 1 Mailbox 29 ID1 Register */ +#define CAN1_MB30_DATA0 0xffc037c0 /* CAN Controller 1 Mailbox 30 Data 0 Register */ +#define CAN1_MB30_DATA1 0xffc037c4 /* CAN Controller 1 Mailbox 30 Data 1 Register */ +#define CAN1_MB30_DATA2 0xffc037c8 /* CAN Controller 1 Mailbox 30 Data 2 Register */ +#define CAN1_MB30_DATA3 0xffc037cc /* CAN Controller 1 Mailbox 30 Data 3 Register */ +#define CAN1_MB30_LENGTH 0xffc037d0 /* CAN Controller 1 Mailbox 30 Length Register */ +#define CAN1_MB30_TIMESTAMP 0xffc037d4 /* CAN Controller 1 Mailbox 30 Timestamp Register */ +#define CAN1_MB30_ID0 0xffc037d8 /* CAN Controller 1 Mailbox 30 ID0 Register */ +#define CAN1_MB30_ID1 0xffc037dc /* CAN Controller 1 Mailbox 30 ID1 Register */ +#define CAN1_MB31_DATA0 0xffc037e0 /* CAN Controller 1 Mailbox 31 Data 0 Register */ +#define CAN1_MB31_DATA1 0xffc037e4 /* CAN Controller 1 Mailbox 31 Data 1 Register */ +#define CAN1_MB31_DATA2 0xffc037e8 /* CAN Controller 1 Mailbox 31 Data 2 Register */ +#define CAN1_MB31_DATA3 0xffc037ec /* CAN Controller 1 Mailbox 31 Data 3 Register */ +#define CAN1_MB31_LENGTH 0xffc037f0 /* CAN Controller 1 Mailbox 31 Length Register */ +#define CAN1_MB31_TIMESTAMP 0xffc037f4 /* CAN Controller 1 Mailbox 31 Timestamp Register */ +#define CAN1_MB31_ID0 0xffc037f8 /* CAN Controller 1 Mailbox 31 ID0 Register */ +#define CAN1_MB31_ID1 0xffc037fc /* CAN Controller 1 Mailbox 31 ID1 Register */ + +/* HOST Port Registers */ + +#define HOST_CONTROL 0xffc03a00 /* HOST Control Register */ +#define HOST_STATUS 0xffc03a04 /* HOST Status Register */ +#define HOST_TIMEOUT 0xffc03a08 /* HOST Acknowledge Mode Timeout Register */ + +/* Pixel Compositor (PIXC) Registers */ + +#define PIXC_CTL 0xffc04400 /* Overlay enable, resampling mode, I/O data format, transparency enable, watermark level, FIFO status */ +#define PIXC_PPL 0xffc04404 /* Holds the number of pixels per line of the display */ +#define PIXC_LPF 0xffc04408 /* Holds the number of lines per frame of the display */ +#define PIXC_AHSTART 0xffc0440c /* Contains horizontal start pixel information of the overlay data (set A) */ +#define PIXC_AHEND 0xffc04410 /* Contains horizontal end pixel information of the overlay data (set A) */ +#define PIXC_AVSTART 0xffc04414 /* Contains vertical start pixel information of the overlay data (set A) */ +#define PIXC_AVEND 0xffc04418 /* Contains vertical end pixel information of the overlay data (set A) */ +#define PIXC_ATRANSP 0xffc0441c /* Contains the transparency ratio (set A) */ +#define PIXC_BHSTART 0xffc04420 /* Contains horizontal start pixel information of the overlay data (set B) */ +#define PIXC_BHEND 0xffc04424 /* Contains horizontal end pixel information of the overlay data (set B) */ +#define PIXC_BVSTART 0xffc04428 /* Contains vertical start pixel information of the overlay data (set B) */ +#define PIXC_BVEND 0xffc0442c /* Contains vertical end pixel information of the overlay data (set B) */ +#define PIXC_BTRANSP 0xffc04430 /* Contains the transparency ratio (set B) */ +#define PIXC_INTRSTAT 0xffc0443c /* Overlay interrupt configuration/status */ +#define PIXC_RYCON 0xffc04440 /* Color space conversion matrix register. Contains the R/Y conversion coefficients */ +#define PIXC_GUCON 0xffc04444 /* Color space conversion matrix register. Contains the G/U conversion coefficients */ +#define PIXC_BVCON 0xffc04448 /* Color space conversion matrix register. Contains the B/V conversion coefficients */ +#define PIXC_CCBIAS 0xffc0444c /* Bias values for the color space conversion matrix */ +#define PIXC_TC 0xffc04450 /* Holds the transparent color value */ + +/* Handshake MDMA 0 Registers */ + +#define HMDMA0_CONTROL 0xffc04500 /* Handshake MDMA0 Control Register */ +#define HMDMA0_ECINIT 0xffc04504 /* Handshake MDMA0 Initial Edge Count Register */ +#define HMDMA0_BCINIT 0xffc04508 /* Handshake MDMA0 Initial Block Count Register */ +#define HMDMA0_ECURGENT 0xffc0450c /* Handshake MDMA0 Urgent Edge Count Threshhold Register */ +#define HMDMA0_ECOVERFLOW 0xffc04510 /* Handshake MDMA0 Edge Count Overflow Interrupt Register */ +#define HMDMA0_ECOUNT 0xffc04514 /* Handshake MDMA0 Current Edge Count Register */ +#define HMDMA0_BCOUNT 0xffc04518 /* Handshake MDMA0 Current Block Count Register */ + +/* Handshake MDMA 1 Registers */ + +#define HMDMA1_CONTROL 0xffc04540 /* Handshake MDMA1 Control Register */ +#define HMDMA1_ECINIT 0xffc04544 /* Handshake MDMA1 Initial Edge Count Register */ +#define HMDMA1_BCINIT 0xffc04548 /* Handshake MDMA1 Initial Block Count Register */ +#define HMDMA1_ECURGENT 0xffc0454c /* Handshake MDMA1 Urgent Edge Count Threshhold Register */ +#define HMDMA1_ECOVERFLOW 0xffc04550 /* Handshake MDMA1 Edge Count Overflow Interrupt Register */ +#define HMDMA1_ECOUNT 0xffc04554 /* Handshake MDMA1 Current Edge Count Register */ +#define HMDMA1_BCOUNT 0xffc04558 /* Handshake MDMA1 Current Block Count Register */ + + +/* ********************************************************** */ +/* SINGLE BIT MACRO PAIRS (bit mask and negated one) */ +/* and MULTI BIT READ MACROS */ +/* ********************************************************** */ + +/* Bit masks for PIXC_CTL */ + +#define PIXC_EN 0x1 /* Pixel Compositor Enable */ +#define nPIXC_EN 0x0 +#define OVR_A_EN 0x2 /* Overlay A Enable */ +#define nOVR_A_EN 0x0 +#define OVR_B_EN 0x4 /* Overlay B Enable */ +#define nOVR_B_EN 0x0 +#define IMG_FORM 0x8 /* Image Data Format */ +#define nIMG_FORM 0x0 +#define OVR_FORM 0x10 /* Overlay Data Format */ +#define nOVR_FORM 0x0 +#define OUT_FORM 0x20 /* Output Data Format */ +#define nOUT_FORM 0x0 +#define UDS_MOD 0x40 /* Resampling Mode */ +#define nUDS_MOD 0x0 +#define TC_EN 0x80 /* Transparent Color Enable */ +#define nTC_EN 0x0 +#define IMG_STAT 0x300 /* Image FIFO Status */ +#define OVR_STAT 0xc00 /* Overlay FIFO Status */ +#define WM_LVL 0x3000 /* FIFO Watermark Level */ + +/* Bit masks for PIXC_AHSTART */ + +#define A_HSTART 0xfff /* Horizontal Start Coordinates */ + +/* Bit masks for PIXC_AHEND */ + +#define A_HEND 0xfff /* Horizontal End Coordinates */ + +/* Bit masks for PIXC_AVSTART */ + +#define A_VSTART 0x3ff /* Vertical Start Coordinates */ + +/* Bit masks for PIXC_AVEND */ + +#define A_VEND 0x3ff /* Vertical End Coordinates */ + +/* Bit masks for PIXC_ATRANSP */ + +#define A_TRANSP 0xf /* Transparency Value */ + +/* Bit masks for PIXC_BHSTART */ + +#define B_HSTART 0xfff /* Horizontal Start Coordinates */ + +/* Bit masks for PIXC_BHEND */ + +#define B_HEND 0xfff /* Horizontal End Coordinates */ + +/* Bit masks for PIXC_BVSTART */ + +#define B_VSTART 0x3ff /* Vertical Start Coordinates */ + +/* Bit masks for PIXC_BVEND */ + +#define B_VEND 0x3ff /* Vertical End Coordinates */ + +/* Bit masks for PIXC_BTRANSP */ + +#define B_TRANSP 0xf /* Transparency Value */ + +/* Bit masks for PIXC_INTRSTAT */ + +#define OVR_INT_EN 0x1 /* Interrupt at End of Last Valid Overlay */ +#define nOVR_INT_EN 0x0 +#define FRM_INT_EN 0x2 /* Interrupt at End of Frame */ +#define nFRM_INT_EN 0x0 +#define OVR_INT_STAT 0x4 /* Overlay Interrupt Status */ +#define nOVR_INT_STAT 0x0 +#define FRM_INT_STAT 0x8 /* Frame Interrupt Status */ +#define nFRM_INT_STAT 0x0 + +/* Bit masks for PIXC_RYCON */ + +#define A11 0x3ff /* A11 in the Coefficient Matrix */ +#define A12 0xffc00 /* A12 in the Coefficient Matrix */ +#define A13 0x3ff00000 /* A13 in the Coefficient Matrix */ +#define RY_MULT4 0x40000000 /* Multiply Row by 4 */ +#define nRY_MULT4 0x0 + +/* Bit masks for PIXC_GUCON */ + +#define A21 0x3ff /* A21 in the Coefficient Matrix */ +#define A22 0xffc00 /* A22 in the Coefficient Matrix */ +#define A23 0x3ff00000 /* A23 in the Coefficient Matrix */ +#define GU_MULT4 0x40000000 /* Multiply Row by 4 */ +#define nGU_MULT4 0x0 + +/* Bit masks for PIXC_BVCON */ + +#define A31 0x3ff /* A31 in the Coefficient Matrix */ +#define A32 0xffc00 /* A32 in the Coefficient Matrix */ +#define A33 0x3ff00000 /* A33 in the Coefficient Matrix */ +#define BV_MULT4 0x40000000 /* Multiply Row by 4 */ +#define nBV_MULT4 0x0 + +/* Bit masks for PIXC_CCBIAS */ + +#define A14 0x3ff /* A14 in the Bias Vector */ +#define A24 0xffc00 /* A24 in the Bias Vector */ +#define A34 0x3ff00000 /* A34 in the Bias Vector */ + +/* Bit masks for PIXC_TC */ + +#define RY_TRANS 0xff /* Transparent Color - R/Y Component */ +#define GU_TRANS 0xff00 /* Transparent Color - G/U Component */ +#define BV_TRANS 0xff0000 /* Transparent Color - B/V Component */ + +/* Bit masks for HOST_CONTROL */ + +#define HOST_EN 0x1 /* Host Enable */ +#define nHOST_EN 0x0 +#define HOST_END 0x2 /* Host Endianess */ +#define nHOST_END 0x0 +#define DATA_SIZE 0x4 /* Data Size */ +#define nDATA_SIZE 0x0 +#define HOST_RST 0x8 /* Host Reset */ +#define nHOST_RST 0x0 +#define HRDY_OVR 0x20 /* Host Ready Override */ +#define nHRDY_OVR 0x0 +#define INT_MODE 0x40 /* Interrupt Mode */ +#define nINT_MODE 0x0 +#define BT_EN 0x80 /* Bus Timeout Enable */ +#define nBT_EN 0x0 +#define EHW 0x100 /* Enable Host Write */ +#define nEHW 0x0 +#define EHR 0x200 /* Enable Host Read */ +#define nEHR 0x0 +#define BDR 0x400 /* Burst DMA Requests */ +#define nBDR 0x0 + +/* Bit masks for HOST_STATUS */ + +#define READY 0x1 /* DMA Ready */ +#define nREADY 0x0 +#define FIFOFULL 0x2 /* FIFO Full */ +#define nFIFOFULL 0x0 +#define FIFOEMPTY 0x4 /* FIFO Empty */ +#define nFIFOEMPTY 0x0 +#define COMPLETE 0x8 /* DMA Complete */ +#define nCOMPLETE 0x0 +#define HSHK 0x10 /* Host Handshake */ +#define nHSHK 0x0 +#define TIMEOUT 0x20 /* Host Timeout */ +#define nTIMEOUT 0x0 +#define HIRQ 0x40 /* Host Interrupt Request */ +#define nHIRQ 0x0 +#define ALLOW_CNFG 0x80 /* Allow New Configuration */ +#define nALLOW_CNFG 0x0 +#define DMA_DIR 0x100 /* DMA Direction */ +#define nDMA_DIR 0x0 +#define BTE 0x200 /* Bus Timeout Enabled */ +#define nBTE 0x0 + +/* Bit masks for HOST_TIMEOUT */ + +#define COUNT_TIMEOUT 0x7ff /* Host Timeout count */ + +/* Bit masks for TIMER_ENABLE1 */ + +#define TIMEN8 0x1 /* Timer 8 Enable */ +#define nTIMEN8 0x0 +#define TIMEN9 0x2 /* Timer 9 Enable */ +#define nTIMEN9 0x0 +#define TIMEN10 0x4 /* Timer 10 Enable */ +#define nTIMEN10 0x0 + +/* Bit masks for TIMER_DISABLE1 */ + +#define TIMDIS8 0x1 /* Timer 8 Disable */ +#define nTIMDIS8 0x0 +#define TIMDIS9 0x2 /* Timer 9 Disable */ +#define nTIMDIS9 0x0 +#define TIMDIS10 0x4 /* Timer 10 Disable */ +#define nTIMDIS10 0x0 + +/* Bit masks for TIMER_STATUS1 */ + +#define TIMIL8 0x1 /* Timer 8 Interrupt */ +#define nTIMIL8 0x0 +#define TIMIL9 0x2 /* Timer 9 Interrupt */ +#define nTIMIL9 0x0 +#define TIMIL10 0x4 /* Timer 10 Interrupt */ +#define nTIMIL10 0x0 +#define TOVF_ERR8 0x10 /* Timer 8 Counter Overflow */ +#define nTOVF_ERR8 0x0 +#define TOVF_ERR9 0x20 /* Timer 9 Counter Overflow */ +#define nTOVF_ERR9 0x0 +#define TOVF_ERR10 0x40 /* Timer 10 Counter Overflow */ +#define nTOVF_ERR10 0x0 +#define TRUN8 0x1000 /* Timer 8 Slave Enable Status */ +#define nTRUN8 0x0 +#define TRUN9 0x2000 /* Timer 9 Slave Enable Status */ +#define nTRUN9 0x0 +#define TRUN10 0x4000 /* Timer 10 Slave Enable Status */ +#define nTRUN10 0x0 + +/* Bit masks for EPPI0 are obtained from common base header for EPPIx (EPPI1 and EPPI2) */ + +/* Bit masks for HMDMAx_CONTROL */ + +#define HMDMAEN 0x1 /* Handshake MDMA Enable */ +#define nHMDMAEN 0x0 +#define REP 0x2 /* Handshake MDMA Request Polarity */ +#define nREP 0x0 +#define UTE 0x8 /* Urgency Threshold Enable */ +#define nUTE 0x0 +#define OIE 0x10 /* Overflow Interrupt Enable */ +#define nOIE 0x0 +#define BDIE 0x20 /* Block Done Interrupt Enable */ +#define nBDIE 0x0 +#define MBDI 0x40 /* Mask Block Done Interrupt */ +#define nMBDI 0x0 +#define DRQ 0x300 /* Handshake MDMA Request Type */ +#define RBC 0x1000 /* Force Reload of BCOUNT */ +#define nRBC 0x0 +#define PS 0x2000 /* Pin Status */ +#define nPS 0x0 +#define OI 0x4000 /* Overflow Interrupt Generated */ +#define nOI 0x0 +#define BDI 0x8000 /* Block Done Interrupt Generated */ +#define nBDI 0x0 + +/* ******************************************* */ +/* MULTI BIT MACRO ENUMERATIONS */ +/* ******************************************* */ + +#endif /* _DEF_BF544_H */ diff --git a/include/asm-blackfin/mach-bf548/defBF548.h b/include/asm-blackfin/mach-bf548/defBF548.h new file mode 100644 index 00000000000000..d9e3062a9117d0 --- /dev/null +++ b/include/asm-blackfin/mach-bf548/defBF548.h @@ -0,0 +1,1966 @@ +/* + * File: include/asm-blackfin/mach-bf548/defBF548.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _DEF_BF548_H +#define _DEF_BF548_H + +/* Include all Core registers and bit definitions */ +#include <asm/mach-common/def_LPBlackfin.h> + +/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF548 */ + +/* Include defBF54x_base.h for the set of #defines that are common to all ADSP-BF54x processors */ +#include "defBF54x_base.h" + +/* The following are the #defines needed by ADSP-BF548 that are not in the common header */ + +/* Timer Registers */ + +#define TIMER8_CONFIG 0xffc00600 /* Timer 8 Configuration Register */ +#define TIMER8_COUNTER 0xffc00604 /* Timer 8 Counter Register */ +#define TIMER8_PERIOD 0xffc00608 /* Timer 8 Period Register */ +#define TIMER8_WIDTH 0xffc0060c /* Timer 8 Width Register */ +#define TIMER9_CONFIG 0xffc00610 /* Timer 9 Configuration Register */ +#define TIMER9_COUNTER 0xffc00614 /* Timer 9 Counter Register */ +#define TIMER9_PERIOD 0xffc00618 /* Timer 9 Period Register */ +#define TIMER9_WIDTH 0xffc0061c /* Timer 9 Width Register */ +#define TIMER10_CONFIG 0xffc00620 /* Timer 10 Configuration Register */ +#define TIMER10_COUNTER 0xffc00624 /* Timer 10 Counter Register */ +#define TIMER10_PERIOD 0xffc00628 /* Timer 10 Period Register */ +#define TIMER10_WIDTH 0xffc0062c /* Timer 10 Width Register */ + +/* Timer Group of 3 Registers */ + +#define TIMER_ENABLE1 0xffc00640 /* Timer Group of 3 Enable Register */ +#define TIMER_DISABLE1 0xffc00644 /* Timer Group of 3 Disable Register */ +#define TIMER_STATUS1 0xffc00648 /* Timer Group of 3 Status Register */ + +/* SPORT0 Registers */ + +#define SPORT0_TCR1 0xffc00800 /* SPORT0 Transmit Configuration 1 Register */ +#define SPORT0_TCR2 0xffc00804 /* SPORT0 Transmit Configuration 2 Register */ +#define SPORT0_TCLKDIV 0xffc00808 /* SPORT0 Transmit Serial Clock Divider Register */ +#define SPORT0_TFSDIV 0xffc0080c /* SPORT0 Transmit Frame Sync Divider Register */ +#define SPORT0_TX 0xffc00810 /* SPORT0 Transmit Data Register */ +#define SPORT0_RX 0xffc00818 /* SPORT0 Receive Data Register */ +#define SPORT0_RCR1 0xffc00820 /* SPORT0 Receive Configuration 1 Register */ +#define SPORT0_RCR2 0xffc00824 /* SPORT0 Receive Configuration 2 Register */ +#define SPORT0_RCLKDIV 0xffc00828 /* SPORT0 Receive Serial Clock Divider Register */ +#define SPORT0_RFSDIV 0xffc0082c /* SPORT0 Receive Frame Sync Divider Register */ +#define SPORT0_STAT 0xffc00830 /* SPORT0 Status Register */ +#define SPORT0_CHNL 0xffc00834 /* SPORT0 Current Channel Register */ +#define SPORT0_MCMC1 0xffc00838 /* SPORT0 Multi channel Configuration Register 1 */ +#define SPORT0_MCMC2 0xffc0083c /* SPORT0 Multi channel Configuration Register 2 */ +#define SPORT0_MTCS0 0xffc00840 /* SPORT0 Multi channel Transmit Select Register 0 */ +#define SPORT0_MTCS1 0xffc00844 /* SPORT0 Multi channel Transmit Select Register 1 */ +#define SPORT0_MTCS2 0xffc00848 /* SPORT0 Multi channel Transmit Select Register 2 */ +#define SPORT0_MTCS3 0xffc0084c /* SPORT0 Multi channel Transmit Select Register 3 */ +#define SPORT0_MRCS0 0xffc00850 /* SPORT0 Multi channel Receive Select Register 0 */ +#define SPORT0_MRCS1 0xffc00854 /* SPORT0 Multi channel Receive Select Register 1 */ +#define SPORT0_MRCS2 0xffc00858 /* SPORT0 Multi channel Receive Select Register 2 */ +#define SPORT0_MRCS3 0xffc0085c /* SPORT0 Multi channel Receive Select Register 3 */ + +/* EPPI0 Registers */ + +#define EPPI0_STATUS 0xffc01000 /* EPPI0 Status Register */ +#define EPPI0_HCOUNT 0xffc01004 /* EPPI0 Horizontal Transfer Count Register */ +#define EPPI0_HDELAY 0xffc01008 /* EPPI0 Horizontal Delay Count Register */ +#define EPPI0_VCOUNT 0xffc0100c /* EPPI0 Vertical Transfer Count Register */ +#define EPPI0_VDELAY 0xffc01010 /* EPPI0 Vertical Delay Count Register */ +#define EPPI0_FRAME 0xffc01014 /* EPPI0 Lines per Frame Register */ +#define EPPI0_LINE 0xffc01018 /* EPPI0 Samples per Line Register */ +#define EPPI0_CLKDIV 0xffc0101c /* EPPI0 Clock Divide Register */ +#define EPPI0_CONTROL 0xffc01020 /* EPPI0 Control Register */ +#define EPPI0_FS1W_HBL 0xffc01024 /* EPPI0 FS1 Width Register / EPPI0 Horizontal Blanking Samples Per Line Register */ +#define EPPI0_FS1P_AVPL 0xffc01028 /* EPPI0 FS1 Period Register / EPPI0 Active Video Samples Per Line Register */ +#define EPPI0_FS2W_LVB 0xffc0102c /* EPPI0 FS2 Width Register / EPPI0 Lines of Vertical Blanking Register */ +#define EPPI0_FS2P_LAVF 0xffc01030 /* EPPI0 FS2 Period Register/ EPPI0 Lines of Active Video Per Field Register */ +#define EPPI0_CLIP 0xffc01034 /* EPPI0 Clipping Register */ + +/* UART2 Registers */ + +#define UART2_DLL 0xffc02100 /* Divisor Latch Low Byte */ +#define UART2_DLH 0xffc02104 /* Divisor Latch High Byte */ +#define UART2_GCTL 0xffc02108 /* Global Control Register */ +#define UART2_LCR 0xffc0210c /* Line Control Register */ +#define UART2_MCR 0xffc02110 /* Modem Control Register */ +#define UART2_LSR 0xffc02114 /* Line Status Register */ +#define UART2_MSR 0xffc02118 /* Modem Status Register */ +#define UART2_SCR 0xffc0211c /* Scratch Register */ +#define UART2_IER_SET 0xffc02120 /* Interrupt Enable Register Set */ +#define UART2_IER_CLEAR 0xffc02124 /* Interrupt Enable Register Clear */ +#define UART2_RBR 0xffc0212c /* Receive Buffer Register */ + +/* Two Wire Interface Registers (TWI1) */ + +#define TWI1_CLKDIV 0xffc02200 /* Clock Divider Register */ +#define TWI1_CONTROL 0xffc02204 /* TWI Control Register */ +#define TWI1_SLAVE_CTRL 0xffc02208 /* TWI Slave Mode Control Register */ +#define TWI1_SLAVE_STAT 0xffc0220c /* TWI Slave Mode Status Register */ +#define TWI1_SLAVE_ADDR 0xffc02210 /* TWI Slave Mode Address Register */ +#define TWI1_MASTER_CTRL 0xffc02214 /* TWI Master Mode Control Register */ +#define TWI1_MASTER_STAT 0xffc02218 /* TWI Master Mode Status Register */ +#define TWI1_MASTER_ADDR 0xffc0221c /* TWI Master Mode Address Register */ +#define TWI1_INT_STAT 0xffc02220 /* TWI Interrupt Status Register */ +#define TWI1_INT_MASK 0xffc02224 /* TWI Interrupt Mask Register */ +#define TWI1_FIFO_CTRL 0xffc02228 /* TWI FIFO Control Register */ +#define TWI1_FIFO_STAT 0xffc0222c /* TWI FIFO Status Register */ +#define TWI1_XMT_DATA8 0xffc02280 /* TWI FIFO Transmit Data Single Byte Register */ +#define TWI1_XMT_DATA16 0xffc02284 /* TWI FIFO Transmit Data Double Byte Register */ +#define TWI1_RCV_DATA8 0xffc02288 /* TWI FIFO Receive Data Single Byte Register */ +#define TWI1_RCV_DATA16 0xffc0228c /* TWI FIFO Receive Data Double Byte Register */ + +/* SPI2 Registers */ + +#define SPI2_CTL 0xffc02400 /* SPI2 Control Register */ +#define SPI2_FLG 0xffc02404 /* SPI2 Flag Register */ +#define SPI2_STAT 0xffc02408 /* SPI2 Status Register */ +#define SPI2_TDBR 0xffc0240c /* SPI2 Transmit Data Buffer Register */ +#define SPI2_RDBR 0xffc02410 /* SPI2 Receive Data Buffer Register */ +#define SPI2_BAUD 0xffc02414 /* SPI2 Baud Rate Register */ +#define SPI2_SHADOW 0xffc02418 /* SPI2 Receive Data Buffer Shadow Register */ + +/* CAN Controller 1 Config 1 Registers */ + +#define CAN1_MC1 0xffc03200 /* CAN Controller 1 Mailbox Configuration Register 1 */ +#define CAN1_MD1 0xffc03204 /* CAN Controller 1 Mailbox Direction Register 1 */ +#define CAN1_TRS1 0xffc03208 /* CAN Controller 1 Transmit Request Set Register 1 */ +#define CAN1_TRR1 0xffc0320c /* CAN Controller 1 Transmit Request Reset Register 1 */ +#define CAN1_TA1 0xffc03210 /* CAN Controller 1 Transmit Acknowledge Register 1 */ +#define CAN1_AA1 0xffc03214 /* CAN Controller 1 Abort Acknowledge Register 1 */ +#define CAN1_RMP1 0xffc03218 /* CAN Controller 1 Receive Message Pending Register 1 */ +#define CAN1_RML1 0xffc0321c /* CAN Controller 1 Receive Message Lost Register 1 */ +#define CAN1_MBTIF1 0xffc03220 /* CAN Controller 1 Mailbox Transmit Interrupt Flag Register 1 */ +#define CAN1_MBRIF1 0xffc03224 /* CAN Controller 1 Mailbox Receive Interrupt Flag Register 1 */ +#define CAN1_MBIM1 0xffc03228 /* CAN Controller 1 Mailbox Interrupt Mask Register 1 */ +#define CAN1_RFH1 0xffc0322c /* CAN Controller 1 Remote Frame Handling Enable Register 1 */ +#define CAN1_OPSS1 0xffc03230 /* CAN Controller 1 Overwrite Protection Single Shot Transmit Register 1 */ + +/* CAN Controller 1 Config 2 Registers */ + +#define CAN1_MC2 0xffc03240 /* CAN Controller 1 Mailbox Configuration Register 2 */ +#define CAN1_MD2 0xffc03244 /* CAN Controller 1 Mailbox Direction Register 2 */ +#define CAN1_TRS2 0xffc03248 /* CAN Controller 1 Transmit Request Set Register 2 */ +#define CAN1_TRR2 0xffc0324c /* CAN Controller 1 Transmit Request Reset Register 2 */ +#define CAN1_TA2 0xffc03250 /* CAN Controller 1 Transmit Acknowledge Register 2 */ +#define CAN1_AA2 0xffc03254 /* CAN Controller 1 Abort Acknowledge Register 2 */ +#define CAN1_RMP2 0xffc03258 /* CAN Controller 1 Receive Message Pending Register 2 */ +#define CAN1_RML2 0xffc0325c /* CAN Controller 1 Receive Message Lost Register 2 */ +#define CAN1_MBTIF2 0xffc03260 /* CAN Controller 1 Mailbox Transmit Interrupt Flag Register 2 */ +#define CAN1_MBRIF2 0xffc03264 /* CAN Controller 1 Mailbox Receive Interrupt Flag Register 2 */ +#define CAN1_MBIM2 0xffc03268 /* CAN Controller 1 Mailbox Interrupt Mask Register 2 */ +#define CAN1_RFH2 0xffc0326c /* CAN Controller 1 Remote Frame Handling Enable Register 2 */ +#define CAN1_OPSS2 0xffc03270 /* CAN Controller 1 Overwrite Protection Single Shot Transmit Register 2 */ + +/* CAN Controller 1 Clock/Interrupt/Counter Registers */ + +#define CAN1_CLOCK 0xffc03280 /* CAN Controller 1 Clock Register */ +#define CAN1_TIMING 0xffc03284 /* CAN Controller 1 Timing Register */ +#define CAN1_DEBUG 0xffc03288 /* CAN Controller 1 Debug Register */ +#define CAN1_STATUS 0xffc0328c /* CAN Controller 1 Global Status Register */ +#define CAN1_CEC 0xffc03290 /* CAN Controller 1 Error Counter Register */ +#define CAN1_GIS 0xffc03294 /* CAN Controller 1 Global Interrupt Status Register */ +#define CAN1_GIM 0xffc03298 /* CAN Controller 1 Global Interrupt Mask Register */ +#define CAN1_GIF 0xffc0329c /* CAN Controller 1 Global Interrupt Flag Register */ +#define CAN1_CONTROL 0xffc032a0 /* CAN Controller 1 Master Control Register */ +#define CAN1_INTR 0xffc032a4 /* CAN Controller 1 Interrupt Pending Register */ +#define CAN1_MBTD 0xffc032ac /* CAN Controller 1 Mailbox Temporary Disable Register */ +#define CAN1_EWR 0xffc032b0 /* CAN Controller 1 Programmable Warning Level Register */ +#define CAN1_ESR 0xffc032b4 /* CAN Controller 1 Error Status Register */ +#define CAN1_UCCNT 0xffc032c4 /* CAN Controller 1 Universal Counter Register */ +#define CAN1_UCRC 0xffc032c8 /* CAN Controller 1 Universal Counter Force Reload Register */ +#define CAN1_UCCNF 0xffc032cc /* CAN Controller 1 Universal Counter Configuration Register */ + +/* CAN Controller 1 Mailbox Acceptance Registers */ + +#define CAN1_AM00L 0xffc03300 /* CAN Controller 1 Mailbox 0 Acceptance Mask High Register */ +#define CAN1_AM00H 0xffc03304 /* CAN Controller 1 Mailbox 0 Acceptance Mask Low Register */ +#define CAN1_AM01L 0xffc03308 /* CAN Controller 1 Mailbox 1 Acceptance Mask High Register */ +#define CAN1_AM01H 0xffc0330c /* CAN Controller 1 Mailbox 1 Acceptance Mask Low Register */ +#define CAN1_AM02L 0xffc03310 /* CAN Controller 1 Mailbox 2 Acceptance Mask High Register */ +#define CAN1_AM02H 0xffc03314 /* CAN Controller 1 Mailbox 2 Acceptance Mask Low Register */ +#define CAN1_AM03L 0xffc03318 /* CAN Controller 1 Mailbox 3 Acceptance Mask High Register */ +#define CAN1_AM03H 0xffc0331c /* CAN Controller 1 Mailbox 3 Acceptance Mask Low Register */ +#define CAN1_AM04L 0xffc03320 /* CAN Controller 1 Mailbox 4 Acceptance Mask High Register */ +#define CAN1_AM04H 0xffc03324 /* CAN Controller 1 Mailbox 4 Acceptance Mask Low Register */ +#define CAN1_AM05L 0xffc03328 /* CAN Controller 1 Mailbox 5 Acceptance Mask High Register */ +#define CAN1_AM05H 0xffc0332c /* CAN Controller 1 Mailbox 5 Acceptance Mask Low Register */ +#define CAN1_AM06L 0xffc03330 /* CAN Controller 1 Mailbox 6 Acceptance Mask High Register */ +#define CAN1_AM06H 0xffc03334 /* CAN Controller 1 Mailbox 6 Acceptance Mask Low Register */ +#define CAN1_AM07L 0xffc03338 /* CAN Controller 1 Mailbox 7 Acceptance Mask High Register */ +#define CAN1_AM07H 0xffc0333c /* CAN Controller 1 Mailbox 7 Acceptance Mask Low Register */ +#define CAN1_AM08L 0xffc03340 /* CAN Controller 1 Mailbox 8 Acceptance Mask High Register */ +#define CAN1_AM08H 0xffc03344 /* CAN Controller 1 Mailbox 8 Acceptance Mask Low Register */ +#define CAN1_AM09L 0xffc03348 /* CAN Controller 1 Mailbox 9 Acceptance Mask High Register */ +#define CAN1_AM09H 0xffc0334c /* CAN Controller 1 Mailbox 9 Acceptance Mask Low Register */ +#define CAN1_AM10L 0xffc03350 /* CAN Controller 1 Mailbox 10 Acceptance Mask High Register */ +#define CAN1_AM10H 0xffc03354 /* CAN Controller 1 Mailbox 10 Acceptance Mask Low Register */ +#define CAN1_AM11L 0xffc03358 /* CAN Controller 1 Mailbox 11 Acceptance Mask High Register */ +#define CAN1_AM11H 0xffc0335c /* CAN Controller 1 Mailbox 11 Acceptance Mask Low Register */ +#define CAN1_AM12L 0xffc03360 /* CAN Controller 1 Mailbox 12 Acceptance Mask High Register */ +#define CAN1_AM12H 0xffc03364 /* CAN Controller 1 Mailbox 12 Acceptance Mask Low Register */ +#define CAN1_AM13L 0xffc03368 /* CAN Controller 1 Mailbox 13 Acceptance Mask High Register */ +#define CAN1_AM13H 0xffc0336c /* CAN Controller 1 Mailbox 13 Acceptance Mask Low Register */ +#define CAN1_AM14L 0xffc03370 /* CAN Controller 1 Mailbox 14 Acceptance Mask High Register */ +#define CAN1_AM14H 0xffc03374 /* CAN Controller 1 Mailbox 14 Acceptance Mask Low Register */ +#define CAN1_AM15L 0xffc03378 /* CAN Controller 1 Mailbox 15 Acceptance Mask High Register */ +#define CAN1_AM15H 0xffc0337c /* CAN Controller 1 Mailbox 15 Acceptance Mask Low Register */ + +/* CAN Controller 1 Mailbox Acceptance Registers */ + +#define CAN1_AM16L 0xffc03380 /* CAN Controller 1 Mailbox 16 Acceptance Mask High Register */ +#define CAN1_AM16H 0xffc03384 /* CAN Controller 1 Mailbox 16 Acceptance Mask Low Register */ +#define CAN1_AM17L 0xffc03388 /* CAN Controller 1 Mailbox 17 Acceptance Mask High Register */ +#define CAN1_AM17H 0xffc0338c /* CAN Controller 1 Mailbox 17 Acceptance Mask Low Register */ +#define CAN1_AM18L 0xffc03390 /* CAN Controller 1 Mailbox 18 Acceptance Mask High Register */ +#define CAN1_AM18H 0xffc03394 /* CAN Controller 1 Mailbox 18 Acceptance Mask Low Register */ +#define CAN1_AM19L 0xffc03398 /* CAN Controller 1 Mailbox 19 Acceptance Mask High Register */ +#define CAN1_AM19H 0xffc0339c /* CAN Controller 1 Mailbox 19 Acceptance Mask Low Register */ +#define CAN1_AM20L 0xffc033a0 /* CAN Controller 1 Mailbox 20 Acceptance Mask High Register */ +#define CAN1_AM20H 0xffc033a4 /* CAN Controller 1 Mailbox 20 Acceptance Mask Low Register */ +#define CAN1_AM21L 0xffc033a8 /* CAN Controller 1 Mailbox 21 Acceptance Mask High Register */ +#define CAN1_AM21H 0xffc033ac /* CAN Controller 1 Mailbox 21 Acceptance Mask Low Register */ +#define CAN1_AM22L 0xffc033b0 /* CAN Controller 1 Mailbox 22 Acceptance Mask High Register */ +#define CAN1_AM22H 0xffc033b4 /* CAN Controller 1 Mailbox 22 Acceptance Mask Low Register */ +#define CAN1_AM23L 0xffc033b8 /* CAN Controller 1 Mailbox 23 Acceptance Mask High Register */ +#define CAN1_AM23H 0xffc033bc /* CAN Controller 1 Mailbox 23 Acceptance Mask Low Register */ +#define CAN1_AM24L 0xffc033c0 /* CAN Controller 1 Mailbox 24 Acceptance Mask High Register */ +#define CAN1_AM24H 0xffc033c4 /* CAN Controller 1 Mailbox 24 Acceptance Mask Low Register */ +#define CAN1_AM25L 0xffc033c8 /* CAN Controller 1 Mailbox 25 Acceptance Mask High Register */ +#define CAN1_AM25H 0xffc033cc /* CAN Controller 1 Mailbox 25 Acceptance Mask Low Register */ +#define CAN1_AM26L 0xffc033d0 /* CAN Controller 1 Mailbox 26 Acceptance Mask High Register */ +#define CAN1_AM26H 0xffc033d4 /* CAN Controller 1 Mailbox 26 Acceptance Mask Low Register */ +#define CAN1_AM27L 0xffc033d8 /* CAN Controller 1 Mailbox 27 Acceptance Mask High Register */ +#define CAN1_AM27H 0xffc033dc /* CAN Controller 1 Mailbox 27 Acceptance Mask Low Register */ +#define CAN1_AM28L 0xffc033e0 /* CAN Controller 1 Mailbox 28 Acceptance Mask High Register */ +#define CAN1_AM28H 0xffc033e4 /* CAN Controller 1 Mailbox 28 Acceptance Mask Low Register */ +#define CAN1_AM29L 0xffc033e8 /* CAN Controller 1 Mailbox 29 Acceptance Mask High Register */ +#define CAN1_AM29H 0xffc033ec /* CAN Controller 1 Mailbox 29 Acceptance Mask Low Register */ +#define CAN1_AM30L 0xffc033f0 /* CAN Controller 1 Mailbox 30 Acceptance Mask High Register */ +#define CAN1_AM30H 0xffc033f4 /* CAN Controller 1 Mailbox 30 Acceptance Mask Low Register */ +#define CAN1_AM31L 0xffc033f8 /* CAN Controller 1 Mailbox 31 Acceptance Mask High Register */ +#define CAN1_AM31H 0xffc033fc /* CAN Controller 1 Mailbox 31 Acceptance Mask Low Register */ + +/* CAN Controller 1 Mailbox Data Registers */ + +#define CAN1_MB00_DATA0 0xffc03400 /* CAN Controller 1 Mailbox 0 Data 0 Register */ +#define CAN1_MB00_DATA1 0xffc03404 /* CAN Controller 1 Mailbox 0 Data 1 Register */ +#define CAN1_MB00_DATA2 0xffc03408 /* CAN Controller 1 Mailbox 0 Data 2 Register */ +#define CAN1_MB00_DATA3 0xffc0340c /* CAN Controller 1 Mailbox 0 Data 3 Register */ +#define CAN1_MB00_LENGTH 0xffc03410 /* CAN Controller 1 Mailbox 0 Length Register */ +#define CAN1_MB00_TIMESTAMP 0xffc03414 /* CAN Controller 1 Mailbox 0 Timestamp Register */ +#define CAN1_MB00_ID0 0xffc03418 /* CAN Controller 1 Mailbox 0 ID0 Register */ +#define CAN1_MB00_ID1 0xffc0341c /* CAN Controller 1 Mailbox 0 ID1 Register */ +#define CAN1_MB01_DATA0 0xffc03420 /* CAN Controller 1 Mailbox 1 Data 0 Register */ +#define CAN1_MB01_DATA1 0xffc03424 /* CAN Controller 1 Mailbox 1 Data 1 Register */ +#define CAN1_MB01_DATA2 0xffc03428 /* CAN Controller 1 Mailbox 1 Data 2 Register */ +#define CAN1_MB01_DATA3 0xffc0342c /* CAN Controller 1 Mailbox 1 Data 3 Register */ +#define CAN1_MB01_LENGTH 0xffc03430 /* CAN Controller 1 Mailbox 1 Length Register */ +#define CAN1_MB01_TIMESTAMP 0xffc03434 /* CAN Controller 1 Mailbox 1 Timestamp Register */ +#define CAN1_MB01_ID0 0xffc03438 /* CAN Controller 1 Mailbox 1 ID0 Register */ +#define CAN1_MB01_ID1 0xffc0343c /* CAN Controller 1 Mailbox 1 ID1 Register */ +#define CAN1_MB02_DATA0 0xffc03440 /* CAN Controller 1 Mailbox 2 Data 0 Register */ +#define CAN1_MB02_DATA1 0xffc03444 /* CAN Controller 1 Mailbox 2 Data 1 Register */ +#define CAN1_MB02_DATA2 0xffc03448 /* CAN Controller 1 Mailbox 2 Data 2 Register */ +#define CAN1_MB02_DATA3 0xffc0344c /* CAN Controller 1 Mailbox 2 Data 3 Register */ +#define CAN1_MB02_LENGTH 0xffc03450 /* CAN Controller 1 Mailbox 2 Length Register */ +#define CAN1_MB02_TIMESTAMP 0xffc03454 /* CAN Controller 1 Mailbox 2 Timestamp Register */ +#define CAN1_MB02_ID0 0xffc03458 /* CAN Controller 1 Mailbox 2 ID0 Register */ +#define CAN1_MB02_ID1 0xffc0345c /* CAN Controller 1 Mailbox 2 ID1 Register */ +#define CAN1_MB03_DATA0 0xffc03460 /* CAN Controller 1 Mailbox 3 Data 0 Register */ +#define CAN1_MB03_DATA1 0xffc03464 /* CAN Controller 1 Mailbox 3 Data 1 Register */ +#define CAN1_MB03_DATA2 0xffc03468 /* CAN Controller 1 Mailbox 3 Data 2 Register */ +#define CAN1_MB03_DATA3 0xffc0346c /* CAN Controller 1 Mailbox 3 Data 3 Register */ +#define CAN1_MB03_LENGTH 0xffc03470 /* CAN Controller 1 Mailbox 3 Length Register */ +#define CAN1_MB03_TIMESTAMP 0xffc03474 /* CAN Controller 1 Mailbox 3 Timestamp Register */ +#define CAN1_MB03_ID0 0xffc03478 /* CAN Controller 1 Mailbox 3 ID0 Register */ +#define CAN1_MB03_ID1 0xffc0347c /* CAN Controller 1 Mailbox 3 ID1 Register */ +#define CAN1_MB04_DATA0 0xffc03480 /* CAN Controller 1 Mailbox 4 Data 0 Register */ +#define CAN1_MB04_DATA1 0xffc03484 /* CAN Controller 1 Mailbox 4 Data 1 Register */ +#define CAN1_MB04_DATA2 0xffc03488 /* CAN Controller 1 Mailbox 4 Data 2 Register */ +#define CAN1_MB04_DATA3 0xffc0348c /* CAN Controller 1 Mailbox 4 Data 3 Register */ +#define CAN1_MB04_LENGTH 0xffc03490 /* CAN Controller 1 Mailbox 4 Length Register */ +#define CAN1_MB04_TIMESTAMP 0xffc03494 /* CAN Controller 1 Mailbox 4 Timestamp Register */ +#define CAN1_MB04_ID0 0xffc03498 /* CAN Controller 1 Mailbox 4 ID0 Register */ +#define CAN1_MB04_ID1 0xffc0349c /* CAN Controller 1 Mailbox 4 ID1 Register */ +#define CAN1_MB05_DATA0 0xffc034a0 /* CAN Controller 1 Mailbox 5 Data 0 Register */ +#define CAN1_MB05_DATA1 0xffc034a4 /* CAN Controller 1 Mailbox 5 Data 1 Register */ +#define CAN1_MB05_DATA2 0xffc034a8 /* CAN Controller 1 Mailbox 5 Data 2 Register */ +#define CAN1_MB05_DATA3 0xffc034ac /* CAN Controller 1 Mailbox 5 Data 3 Register */ +#define CAN1_MB05_LENGTH 0xffc034b0 /* CAN Controller 1 Mailbox 5 Length Register */ +#define CAN1_MB05_TIMESTAMP 0xffc034b4 /* CAN Controller 1 Mailbox 5 Timestamp Register */ +#define CAN1_MB05_ID0 0xffc034b8 /* CAN Controller 1 Mailbox 5 ID0 Register */ +#define CAN1_MB05_ID1 0xffc034bc /* CAN Controller 1 Mailbox 5 ID1 Register */ +#define CAN1_MB06_DATA0 0xffc034c0 /* CAN Controller 1 Mailbox 6 Data 0 Register */ +#define CAN1_MB06_DATA1 0xffc034c4 /* CAN Controller 1 Mailbox 6 Data 1 Register */ +#define CAN1_MB06_DATA2 0xffc034c8 /* CAN Controller 1 Mailbox 6 Data 2 Register */ +#define CAN1_MB06_DATA3 0xffc034cc /* CAN Controller 1 Mailbox 6 Data 3 Register */ +#define CAN1_MB06_LENGTH 0xffc034d0 /* CAN Controller 1 Mailbox 6 Length Register */ +#define CAN1_MB06_TIMESTAMP 0xffc034d4 /* CAN Controller 1 Mailbox 6 Timestamp Register */ +#define CAN1_MB06_ID0 0xffc034d8 /* CAN Controller 1 Mailbox 6 ID0 Register */ +#define CAN1_MB06_ID1 0xffc034dc /* CAN Controller 1 Mailbox 6 ID1 Register */ +#define CAN1_MB07_DATA0 0xffc034e0 /* CAN Controller 1 Mailbox 7 Data 0 Register */ +#define CAN1_MB07_DATA1 0xffc034e4 /* CAN Controller 1 Mailbox 7 Data 1 Register */ +#define CAN1_MB07_DATA2 0xffc034e8 /* CAN Controller 1 Mailbox 7 Data 2 Register */ +#define CAN1_MB07_DATA3 0xffc034ec /* CAN Controller 1 Mailbox 7 Data 3 Register */ +#define CAN1_MB07_LENGTH 0xffc034f0 /* CAN Controller 1 Mailbox 7 Length Register */ +#define CAN1_MB07_TIMESTAMP 0xffc034f4 /* CAN Controller 1 Mailbox 7 Timestamp Register */ +#define CAN1_MB07_ID0 0xffc034f8 /* CAN Controller 1 Mailbox 7 ID0 Register */ +#define CAN1_MB07_ID1 0xffc034fc /* CAN Controller 1 Mailbox 7 ID1 Register */ +#define CAN1_MB08_DATA0 0xffc03500 /* CAN Controller 1 Mailbox 8 Data 0 Register */ +#define CAN1_MB08_DATA1 0xffc03504 /* CAN Controller 1 Mailbox 8 Data 1 Register */ +#define CAN1_MB08_DATA2 0xffc03508 /* CAN Controller 1 Mailbox 8 Data 2 Register */ +#define CAN1_MB08_DATA3 0xffc0350c /* CAN Controller 1 Mailbox 8 Data 3 Register */ +#define CAN1_MB08_LENGTH 0xffc03510 /* CAN Controller 1 Mailbox 8 Length Register */ +#define CAN1_MB08_TIMESTAMP 0xffc03514 /* CAN Controller 1 Mailbox 8 Timestamp Register */ +#define CAN1_MB08_ID0 0xffc03518 /* CAN Controller 1 Mailbox 8 ID0 Register */ +#define CAN1_MB08_ID1 0xffc0351c /* CAN Controller 1 Mailbox 8 ID1 Register */ +#define CAN1_MB09_DATA0 0xffc03520 /* CAN Controller 1 Mailbox 9 Data 0 Register */ +#define CAN1_MB09_DATA1 0xffc03524 /* CAN Controller 1 Mailbox 9 Data 1 Register */ +#define CAN1_MB09_DATA2 0xffc03528 /* CAN Controller 1 Mailbox 9 Data 2 Register */ +#define CAN1_MB09_DATA3 0xffc0352c /* CAN Controller 1 Mailbox 9 Data 3 Register */ +#define CAN1_MB09_LENGTH 0xffc03530 /* CAN Controller 1 Mailbox 9 Length Register */ +#define CAN1_MB09_TIMESTAMP 0xffc03534 /* CAN Controller 1 Mailbox 9 Timestamp Register */ +#define CAN1_MB09_ID0 0xffc03538 /* CAN Controller 1 Mailbox 9 ID0 Register */ +#define CAN1_MB09_ID1 0xffc0353c /* CAN Controller 1 Mailbox 9 ID1 Register */ +#define CAN1_MB10_DATA0 0xffc03540 /* CAN Controller 1 Mailbox 10 Data 0 Register */ +#define CAN1_MB10_DATA1 0xffc03544 /* CAN Controller 1 Mailbox 10 Data 1 Register */ +#define CAN1_MB10_DATA2 0xffc03548 /* CAN Controller 1 Mailbox 10 Data 2 Register */ +#define CAN1_MB10_DATA3 0xffc0354c /* CAN Controller 1 Mailbox 10 Data 3 Register */ +#define CAN1_MB10_LENGTH 0xffc03550 /* CAN Controller 1 Mailbox 10 Length Register */ +#define CAN1_MB10_TIMESTAMP 0xffc03554 /* CAN Controller 1 Mailbox 10 Timestamp Register */ +#define CAN1_MB10_ID0 0xffc03558 /* CAN Controller 1 Mailbox 10 ID0 Register */ +#define CAN1_MB10_ID1 0xffc0355c /* CAN Controller 1 Mailbox 10 ID1 Register */ +#define CAN1_MB11_DATA0 0xffc03560 /* CAN Controller 1 Mailbox 11 Data 0 Register */ +#define CAN1_MB11_DATA1 0xffc03564 /* CAN Controller 1 Mailbox 11 Data 1 Register */ +#define CAN1_MB11_DATA2 0xffc03568 /* CAN Controller 1 Mailbox 11 Data 2 Register */ +#define CAN1_MB11_DATA3 0xffc0356c /* CAN Controller 1 Mailbox 11 Data 3 Register */ +#define CAN1_MB11_LENGTH 0xffc03570 /* CAN Controller 1 Mailbox 11 Length Register */ +#define CAN1_MB11_TIMESTAMP 0xffc03574 /* CAN Controller 1 Mailbox 11 Timestamp Register */ +#define CAN1_MB11_ID0 0xffc03578 /* CAN Controller 1 Mailbox 11 ID0 Register */ +#define CAN1_MB11_ID1 0xffc0357c /* CAN Controller 1 Mailbox 11 ID1 Register */ +#define CAN1_MB12_DATA0 0xffc03580 /* CAN Controller 1 Mailbox 12 Data 0 Register */ +#define CAN1_MB12_DATA1 0xffc03584 /* CAN Controller 1 Mailbox 12 Data 1 Register */ +#define CAN1_MB12_DATA2 0xffc03588 /* CAN Controller 1 Mailbox 12 Data 2 Register */ +#define CAN1_MB12_DATA3 0xffc0358c /* CAN Controller 1 Mailbox 12 Data 3 Register */ +#define CAN1_MB12_LENGTH 0xffc03590 /* CAN Controller 1 Mailbox 12 Length Register */ +#define CAN1_MB12_TIMESTAMP 0xffc03594 /* CAN Controller 1 Mailbox 12 Timestamp Register */ +#define CAN1_MB12_ID0 0xffc03598 /* CAN Controller 1 Mailbox 12 ID0 Register */ +#define CAN1_MB12_ID1 0xffc0359c /* CAN Controller 1 Mailbox 12 ID1 Register */ +#define CAN1_MB13_DATA0 0xffc035a0 /* CAN Controller 1 Mailbox 13 Data 0 Register */ +#define CAN1_MB13_DATA1 0xffc035a4 /* CAN Controller 1 Mailbox 13 Data 1 Register */ +#define CAN1_MB13_DATA2 0xffc035a8 /* CAN Controller 1 Mailbox 13 Data 2 Register */ +#define CAN1_MB13_DATA3 0xffc035ac /* CAN Controller 1 Mailbox 13 Data 3 Register */ +#define CAN1_MB13_LENGTH 0xffc035b0 /* CAN Controller 1 Mailbox 13 Length Register */ +#define CAN1_MB13_TIMESTAMP 0xffc035b4 /* CAN Controller 1 Mailbox 13 Timestamp Register */ +#define CAN1_MB13_ID0 0xffc035b8 /* CAN Controller 1 Mailbox 13 ID0 Register */ +#define CAN1_MB13_ID1 0xffc035bc /* CAN Controller 1 Mailbox 13 ID1 Register */ +#define CAN1_MB14_DATA0 0xffc035c0 /* CAN Controller 1 Mailbox 14 Data 0 Register */ +#define CAN1_MB14_DATA1 0xffc035c4 /* CAN Controller 1 Mailbox 14 Data 1 Register */ +#define CAN1_MB14_DATA2 0xffc035c8 /* CAN Controller 1 Mailbox 14 Data 2 Register */ +#define CAN1_MB14_DATA3 0xffc035cc /* CAN Controller 1 Mailbox 14 Data 3 Register */ +#define CAN1_MB14_LENGTH 0xffc035d0 /* CAN Controller 1 Mailbox 14 Length Register */ +#define CAN1_MB14_TIMESTAMP 0xffc035d4 /* CAN Controller 1 Mailbox 14 Timestamp Register */ +#define CAN1_MB14_ID0 0xffc035d8 /* CAN Controller 1 Mailbox 14 ID0 Register */ +#define CAN1_MB14_ID1 0xffc035dc /* CAN Controller 1 Mailbox 14 ID1 Register */ +#define CAN1_MB15_DATA0 0xffc035e0 /* CAN Controller 1 Mailbox 15 Data 0 Register */ +#define CAN1_MB15_DATA1 0xffc035e4 /* CAN Controller 1 Mailbox 15 Data 1 Register */ +#define CAN1_MB15_DATA2 0xffc035e8 /* CAN Controller 1 Mailbox 15 Data 2 Register */ +#define CAN1_MB15_DATA3 0xffc035ec /* CAN Controller 1 Mailbox 15 Data 3 Register */ +#define CAN1_MB15_LENGTH 0xffc035f0 /* CAN Controller 1 Mailbox 15 Length Register */ +#define CAN1_MB15_TIMESTAMP 0xffc035f4 /* CAN Controller 1 Mailbox 15 Timestamp Register */ +#define CAN1_MB15_ID0 0xffc035f8 /* CAN Controller 1 Mailbox 15 ID0 Register */ +#define CAN1_MB15_ID1 0xffc035fc /* CAN Controller 1 Mailbox 15 ID1 Register */ + +/* CAN Controller 1 Mailbox Data Registers */ + +#define CAN1_MB16_DATA0 0xffc03600 /* CAN Controller 1 Mailbox 16 Data 0 Register */ +#define CAN1_MB16_DATA1 0xffc03604 /* CAN Controller 1 Mailbox 16 Data 1 Register */ +#define CAN1_MB16_DATA2 0xffc03608 /* CAN Controller 1 Mailbox 16 Data 2 Register */ +#define CAN1_MB16_DATA3 0xffc0360c /* CAN Controller 1 Mailbox 16 Data 3 Register */ +#define CAN1_MB16_LENGTH 0xffc03610 /* CAN Controller 1 Mailbox 16 Length Register */ +#define CAN1_MB16_TIMESTAMP 0xffc03614 /* CAN Controller 1 Mailbox 16 Timestamp Register */ +#define CAN1_MB16_ID0 0xffc03618 /* CAN Controller 1 Mailbox 16 ID0 Register */ +#define CAN1_MB16_ID1 0xffc0361c /* CAN Controller 1 Mailbox 16 ID1 Register */ +#define CAN1_MB17_DATA0 0xffc03620 /* CAN Controller 1 Mailbox 17 Data 0 Register */ +#define CAN1_MB17_DATA1 0xffc03624 /* CAN Controller 1 Mailbox 17 Data 1 Register */ +#define CAN1_MB17_DATA2 0xffc03628 /* CAN Controller 1 Mailbox 17 Data 2 Register */ +#define CAN1_MB17_DATA3 0xffc0362c /* CAN Controller 1 Mailbox 17 Data 3 Register */ +#define CAN1_MB17_LENGTH 0xffc03630 /* CAN Controller 1 Mailbox 17 Length Register */ +#define CAN1_MB17_TIMESTAMP 0xffc03634 /* CAN Controller 1 Mailbox 17 Timestamp Register */ +#define CAN1_MB17_ID0 0xffc03638 /* CAN Controller 1 Mailbox 17 ID0 Register */ +#define CAN1_MB17_ID1 0xffc0363c /* CAN Controller 1 Mailbox 17 ID1 Register */ +#define CAN1_MB18_DATA0 0xffc03640 /* CAN Controller 1 Mailbox 18 Data 0 Register */ +#define CAN1_MB18_DATA1 0xffc03644 /* CAN Controller 1 Mailbox 18 Data 1 Register */ +#define CAN1_MB18_DATA2 0xffc03648 /* CAN Controller 1 Mailbox 18 Data 2 Register */ +#define CAN1_MB18_DATA3 0xffc0364c /* CAN Controller 1 Mailbox 18 Data 3 Register */ +#define CAN1_MB18_LENGTH 0xffc03650 /* CAN Controller 1 Mailbox 18 Length Register */ +#define CAN1_MB18_TIMESTAMP 0xffc03654 /* CAN Controller 1 Mailbox 18 Timestamp Register */ +#define CAN1_MB18_ID0 0xffc03658 /* CAN Controller 1 Mailbox 18 ID0 Register */ +#define CAN1_MB18_ID1 0xffc0365c /* CAN Controller 1 Mailbox 18 ID1 Register */ +#define CAN1_MB19_DATA0 0xffc03660 /* CAN Controller 1 Mailbox 19 Data 0 Register */ +#define CAN1_MB19_DATA1 0xffc03664 /* CAN Controller 1 Mailbox 19 Data 1 Register */ +#define CAN1_MB19_DATA2 0xffc03668 /* CAN Controller 1 Mailbox 19 Data 2 Register */ +#define CAN1_MB19_DATA3 0xffc0366c /* CAN Controller 1 Mailbox 19 Data 3 Register */ +#define CAN1_MB19_LENGTH 0xffc03670 /* CAN Controller 1 Mailbox 19 Length Register */ +#define CAN1_MB19_TIMESTAMP 0xffc03674 /* CAN Controller 1 Mailbox 19 Timestamp Register */ +#define CAN1_MB19_ID0 0xffc03678 /* CAN Controller 1 Mailbox 19 ID0 Register */ +#define CAN1_MB19_ID1 0xffc0367c /* CAN Controller 1 Mailbox 19 ID1 Register */ +#define CAN1_MB20_DATA0 0xffc03680 /* CAN Controller 1 Mailbox 20 Data 0 Register */ +#define CAN1_MB20_DATA1 0xffc03684 /* CAN Controller 1 Mailbox 20 Data 1 Register */ +#define CAN1_MB20_DATA2 0xffc03688 /* CAN Controller 1 Mailbox 20 Data 2 Register */ +#define CAN1_MB20_DATA3 0xffc0368c /* CAN Controller 1 Mailbox 20 Data 3 Register */ +#define CAN1_MB20_LENGTH 0xffc03690 /* CAN Controller 1 Mailbox 20 Length Register */ +#define CAN1_MB20_TIMESTAMP 0xffc03694 /* CAN Controller 1 Mailbox 20 Timestamp Register */ +#define CAN1_MB20_ID0 0xffc03698 /* CAN Controller 1 Mailbox 20 ID0 Register */ +#define CAN1_MB20_ID1 0xffc0369c /* CAN Controller 1 Mailbox 20 ID1 Register */ +#define CAN1_MB21_DATA0 0xffc036a0 /* CAN Controller 1 Mailbox 21 Data 0 Register */ +#define CAN1_MB21_DATA1 0xffc036a4 /* CAN Controller 1 Mailbox 21 Data 1 Register */ +#define CAN1_MB21_DATA2 0xffc036a8 /* CAN Controller 1 Mailbox 21 Data 2 Register */ +#define CAN1_MB21_DATA3 0xffc036ac /* CAN Controller 1 Mailbox 21 Data 3 Register */ +#define CAN1_MB21_LENGTH 0xffc036b0 /* CAN Controller 1 Mailbox 21 Length Register */ +#define CAN1_MB21_TIMESTAMP 0xffc036b4 /* CAN Controller 1 Mailbox 21 Timestamp Register */ +#define CAN1_MB21_ID0 0xffc036b8 /* CAN Controller 1 Mailbox 21 ID0 Register */ +#define CAN1_MB21_ID1 0xffc036bc /* CAN Controller 1 Mailbox 21 ID1 Register */ +#define CAN1_MB22_DATA0 0xffc036c0 /* CAN Controller 1 Mailbox 22 Data 0 Register */ +#define CAN1_MB22_DATA1 0xffc036c4 /* CAN Controller 1 Mailbox 22 Data 1 Register */ +#define CAN1_MB22_DATA2 0xffc036c8 /* CAN Controller 1 Mailbox 22 Data 2 Register */ +#define CAN1_MB22_DATA3 0xffc036cc /* CAN Controller 1 Mailbox 22 Data 3 Register */ +#define CAN1_MB22_LENGTH 0xffc036d0 /* CAN Controller 1 Mailbox 22 Length Register */ +#define CAN1_MB22_TIMESTAMP 0xffc036d4 /* CAN Controller 1 Mailbox 22 Timestamp Register */ +#define CAN1_MB22_ID0 0xffc036d8 /* CAN Controller 1 Mailbox 22 ID0 Register */ +#define CAN1_MB22_ID1 0xffc036dc /* CAN Controller 1 Mailbox 22 ID1 Register */ +#define CAN1_MB23_DATA0 0xffc036e0 /* CAN Controller 1 Mailbox 23 Data 0 Register */ +#define CAN1_MB23_DATA1 0xffc036e4 /* CAN Controller 1 Mailbox 23 Data 1 Register */ +#define CAN1_MB23_DATA2 0xffc036e8 /* CAN Controller 1 Mailbox 23 Data 2 Register */ +#define CAN1_MB23_DATA3 0xffc036ec /* CAN Controller 1 Mailbox 23 Data 3 Register */ +#define CAN1_MB23_LENGTH 0xffc036f0 /* CAN Controller 1 Mailbox 23 Length Register */ +#define CAN1_MB23_TIMESTAMP 0xffc036f4 /* CAN Controller 1 Mailbox 23 Timestamp Register */ +#define CAN1_MB23_ID0 0xffc036f8 /* CAN Controller 1 Mailbox 23 ID0 Register */ +#define CAN1_MB23_ID1 0xffc036fc /* CAN Controller 1 Mailbox 23 ID1 Register */ +#define CAN1_MB24_DATA0 0xffc03700 /* CAN Controller 1 Mailbox 24 Data 0 Register */ +#define CAN1_MB24_DATA1 0xffc03704 /* CAN Controller 1 Mailbox 24 Data 1 Register */ +#define CAN1_MB24_DATA2 0xffc03708 /* CAN Controller 1 Mailbox 24 Data 2 Register */ +#define CAN1_MB24_DATA3 0xffc0370c /* CAN Controller 1 Mailbox 24 Data 3 Register */ +#define CAN1_MB24_LENGTH 0xffc03710 /* CAN Controller 1 Mailbox 24 Length Register */ +#define CAN1_MB24_TIMESTAMP 0xffc03714 /* CAN Controller 1 Mailbox 24 Timestamp Register */ +#define CAN1_MB24_ID0 0xffc03718 /* CAN Controller 1 Mailbox 24 ID0 Register */ +#define CAN1_MB24_ID1 0xffc0371c /* CAN Controller 1 Mailbox 24 ID1 Register */ +#define CAN1_MB25_DATA0 0xffc03720 /* CAN Controller 1 Mailbox 25 Data 0 Register */ +#define CAN1_MB25_DATA1 0xffc03724 /* CAN Controller 1 Mailbox 25 Data 1 Register */ +#define CAN1_MB25_DATA2 0xffc03728 /* CAN Controller 1 Mailbox 25 Data 2 Register */ +#define CAN1_MB25_DATA3 0xffc0372c /* CAN Controller 1 Mailbox 25 Data 3 Register */ +#define CAN1_MB25_LENGTH 0xffc03730 /* CAN Controller 1 Mailbox 25 Length Register */ +#define CAN1_MB25_TIMESTAMP 0xffc03734 /* CAN Controller 1 Mailbox 25 Timestamp Register */ +#define CAN1_MB25_ID0 0xffc03738 /* CAN Controller 1 Mailbox 25 ID0 Register */ +#define CAN1_MB25_ID1 0xffc0373c /* CAN Controller 1 Mailbox 25 ID1 Register */ +#define CAN1_MB26_DATA0 0xffc03740 /* CAN Controller 1 Mailbox 26 Data 0 Register */ +#define CAN1_MB26_DATA1 0xffc03744 /* CAN Controller 1 Mailbox 26 Data 1 Register */ +#define CAN1_MB26_DATA2 0xffc03748 /* CAN Controller 1 Mailbox 26 Data 2 Register */ +#define CAN1_MB26_DATA3 0xffc0374c /* CAN Controller 1 Mailbox 26 Data 3 Register */ +#define CAN1_MB26_LENGTH 0xffc03750 /* CAN Controller 1 Mailbox 26 Length Register */ +#define CAN1_MB26_TIMESTAMP 0xffc03754 /* CAN Controller 1 Mailbox 26 Timestamp Register */ +#define CAN1_MB26_ID0 0xffc03758 /* CAN Controller 1 Mailbox 26 ID0 Register */ +#define CAN1_MB26_ID1 0xffc0375c /* CAN Controller 1 Mailbox 26 ID1 Register */ +#define CAN1_MB27_DATA0 0xffc03760 /* CAN Controller 1 Mailbox 27 Data 0 Register */ +#define CAN1_MB27_DATA1 0xffc03764 /* CAN Controller 1 Mailbox 27 Data 1 Register */ +#define CAN1_MB27_DATA2 0xffc03768 /* CAN Controller 1 Mailbox 27 Data 2 Register */ +#define CAN1_MB27_DATA3 0xffc0376c /* CAN Controller 1 Mailbox 27 Data 3 Register */ +#define CAN1_MB27_LENGTH 0xffc03770 /* CAN Controller 1 Mailbox 27 Length Register */ +#define CAN1_MB27_TIMESTAMP 0xffc03774 /* CAN Controller 1 Mailbox 27 Timestamp Register */ +#define CAN1_MB27_ID0 0xffc03778 /* CAN Controller 1 Mailbox 27 ID0 Register */ +#define CAN1_MB27_ID1 0xffc0377c /* CAN Controller 1 Mailbox 27 ID1 Register */ +#define CAN1_MB28_DATA0 0xffc03780 /* CAN Controller 1 Mailbox 28 Data 0 Register */ +#define CAN1_MB28_DATA1 0xffc03784 /* CAN Controller 1 Mailbox 28 Data 1 Register */ +#define CAN1_MB28_DATA2 0xffc03788 /* CAN Controller 1 Mailbox 28 Data 2 Register */ +#define CAN1_MB28_DATA3 0xffc0378c /* CAN Controller 1 Mailbox 28 Data 3 Register */ +#define CAN1_MB28_LENGTH 0xffc03790 /* CAN Controller 1 Mailbox 28 Length Register */ +#define CAN1_MB28_TIMESTAMP 0xffc03794 /* CAN Controller 1 Mailbox 28 Timestamp Register */ +#define CAN1_MB28_ID0 0xffc03798 /* CAN Controller 1 Mailbox 28 ID0 Register */ +#define CAN1_MB28_ID1 0xffc0379c /* CAN Controller 1 Mailbox 28 ID1 Register */ +#define CAN1_MB29_DATA0 0xffc037a0 /* CAN Controller 1 Mailbox 29 Data 0 Register */ +#define CAN1_MB29_DATA1 0xffc037a4 /* CAN Controller 1 Mailbox 29 Data 1 Register */ +#define CAN1_MB29_DATA2 0xffc037a8 /* CAN Controller 1 Mailbox 29 Data 2 Register */ +#define CAN1_MB29_DATA3 0xffc037ac /* CAN Controller 1 Mailbox 29 Data 3 Register */ +#define CAN1_MB29_LENGTH 0xffc037b0 /* CAN Controller 1 Mailbox 29 Length Register */ +#define CAN1_MB29_TIMESTAMP 0xffc037b4 /* CAN Controller 1 Mailbox 29 Timestamp Register */ +#define CAN1_MB29_ID0 0xffc037b8 /* CAN Controller 1 Mailbox 29 ID0 Register */ +#define CAN1_MB29_ID1 0xffc037bc /* CAN Controller 1 Mailbox 29 ID1 Register */ +#define CAN1_MB30_DATA0 0xffc037c0 /* CAN Controller 1 Mailbox 30 Data 0 Register */ +#define CAN1_MB30_DATA1 0xffc037c4 /* CAN Controller 1 Mailbox 30 Data 1 Register */ +#define CAN1_MB30_DATA2 0xffc037c8 /* CAN Controller 1 Mailbox 30 Data 2 Register */ +#define CAN1_MB30_DATA3 0xffc037cc /* CAN Controller 1 Mailbox 30 Data 3 Register */ +#define CAN1_MB30_LENGTH 0xffc037d0 /* CAN Controller 1 Mailbox 30 Length Register */ +#define CAN1_MB30_TIMESTAMP 0xffc037d4 /* CAN Controller 1 Mailbox 30 Timestamp Register */ +#define CAN1_MB30_ID0 0xffc037d8 /* CAN Controller 1 Mailbox 30 ID0 Register */ +#define CAN1_MB30_ID1 0xffc037dc /* CAN Controller 1 Mailbox 30 ID1 Register */ +#define CAN1_MB31_DATA0 0xffc037e0 /* CAN Controller 1 Mailbox 31 Data 0 Register */ +#define CAN1_MB31_DATA1 0xffc037e4 /* CAN Controller 1 Mailbox 31 Data 1 Register */ +#define CAN1_MB31_DATA2 0xffc037e8 /* CAN Controller 1 Mailbox 31 Data 2 Register */ +#define CAN1_MB31_DATA3 0xffc037ec /* CAN Controller 1 Mailbox 31 Data 3 Register */ +#define CAN1_MB31_LENGTH 0xffc037f0 /* CAN Controller 1 Mailbox 31 Length Register */ +#define CAN1_MB31_TIMESTAMP 0xffc037f4 /* CAN Controller 1 Mailbox 31 Timestamp Register */ +#define CAN1_MB31_ID0 0xffc037f8 /* CAN Controller 1 Mailbox 31 ID0 Register */ +#define CAN1_MB31_ID1 0xffc037fc /* CAN Controller 1 Mailbox 31 ID1 Register */ + +/* ATAPI Registers */ + +#define ATAPI_CONTROL 0xffc03800 /* ATAPI Control Register */ +#define ATAPI_STATUS 0xffc03804 /* ATAPI Status Register */ +#define ATAPI_DEV_ADDR 0xffc03808 /* ATAPI Device Register Address */ +#define ATAPI_DEV_TXBUF 0xffc0380c /* ATAPI Device Register Write Data */ +#define ATAPI_DEV_RXBUF 0xffc03810 /* ATAPI Device Register Read Data */ +#define ATAPI_INT_MASK 0xffc03814 /* ATAPI Interrupt Mask Register */ +#define ATAPI_INT_STATUS 0xffc03818 /* ATAPI Interrupt Status Register */ +#define ATAPI_XFER_LEN 0xffc0381c /* ATAPI Length of Transfer */ +#define ATAPI_LINE_STATUS 0xffc03820 /* ATAPI Line Status */ +#define ATAPI_SM_STATE 0xffc03824 /* ATAPI State Machine Status */ +#define ATAPI_TERMINATE 0xffc03828 /* ATAPI Host Terminate */ +#define ATAPI_PIO_TFRCNT 0xffc0382c /* ATAPI PIO mode transfer count */ +#define ATAPI_DMA_TFRCNT 0xffc03830 /* ATAPI DMA mode transfer count */ +#define ATAPI_UMAIN_TFRCNT 0xffc03834 /* ATAPI UDMAIN transfer count */ +#define ATAPI_UDMAOUT_TFRCNT 0xffc03838 /* ATAPI UDMAOUT transfer count */ +#define ATAPI_REG_TIM_0 0xffc03840 /* ATAPI Register Transfer Timing 0 */ +#define ATAPI_PIO_TIM_0 0xffc03844 /* ATAPI PIO Timing 0 Register */ +#define ATAPI_PIO_TIM_1 0xffc03848 /* ATAPI PIO Timing 1 Register */ +#define ATAPI_MULTI_TIM_0 0xffc03850 /* ATAPI Multi-DMA Timing 0 Register */ +#define ATAPI_MULTI_TIM_1 0xffc03854 /* ATAPI Multi-DMA Timing 1 Register */ +#define ATAPI_MULTI_TIM_2 0xffc03858 /* ATAPI Multi-DMA Timing 2 Register */ +#define ATAPI_ULTRA_TIM_0 0xffc03860 /* ATAPI Ultra-DMA Timing 0 Register */ +#define ATAPI_ULTRA_TIM_1 0xffc03864 /* ATAPI Ultra-DMA Timing 1 Register */ +#define ATAPI_ULTRA_TIM_2 0xffc03868 /* ATAPI Ultra-DMA Timing 2 Register */ +#define ATAPI_ULTRA_TIM_3 0xffc0386c /* ATAPI Ultra-DMA Timing 3 Register */ + +/* SDH Registers */ + +#define SDH_PWR_CTL 0xffc03900 /* SDH Power Control */ +#define SDH_CLK_CTL 0xffc03904 /* SDH Clock Control */ +#define SDH_ARGUMENT 0xffc03908 /* SDH Argument */ +#define SDH_COMMAND 0xffc0390c /* SDH Command */ +#define SDH_RESP_CMD 0xffc03910 /* SDH Response Command */ +#define SDH_RESPONSE0 0xffc03914 /* SDH Response0 */ +#define SDH_RESPONSE1 0xffc03918 /* SDH Response1 */ +#define SDH_RESPONSE2 0xffc0391c /* SDH Response2 */ +#define SDH_RESPONSE3 0xffc03920 /* SDH Response3 */ +#define SDH_DATA_TIMER 0xffc03924 /* SDH Data Timer */ +#define SDH_DATA_LGTH 0xffc03928 /* SDH Data Length */ +#define SDH_DATA_CTL 0xffc0392c /* SDH Data Control */ +#define SDH_DATA_CNT 0xffc03930 /* SDH Data Counter */ +#define SDH_STATUS 0xffc03934 /* SDH Status */ +#define SDH_STATUS_CLR 0xffc03938 /* SDH Status Clear */ +#define SDH_MASK0 0xffc0393c /* SDH Interrupt0 Mask */ +#define SDH_MASK1 0xffc03940 /* SDH Interrupt1 Mask */ +#define SDH_FIFO_CNT 0xffc03948 /* SDH FIFO Counter */ +#define SDH_FIFO 0xffc03980 /* SDH Data FIFO */ +#define SDH_E_STATUS 0xffc039c0 /* SDH Exception Status */ +#define SDH_E_MASK 0xffc039c4 /* SDH Exception Mask */ +#define SDH_CFG 0xffc039c8 /* SDH Configuration */ +#define SDH_RD_WAIT_EN 0xffc039cc /* SDH Read Wait Enable */ +#define SDH_PID0 0xffc039d0 /* SDH Peripheral Identification0 */ +#define SDH_PID1 0xffc039d4 /* SDH Peripheral Identification1 */ +#define SDH_PID2 0xffc039d8 /* SDH Peripheral Identification2 */ +#define SDH_PID3 0xffc039dc /* SDH Peripheral Identification3 */ +#define SDH_PID4 0xffc039e0 /* SDH Peripheral Identification4 */ +#define SDH_PID5 0xffc039e4 /* SDH Peripheral Identification5 */ +#define SDH_PID6 0xffc039e8 /* SDH Peripheral Identification6 */ +#define SDH_PID7 0xffc039ec /* SDH Peripheral Identification7 */ + +/* HOST Port Registers */ + +#define HOST_CONTROL 0xffc03a00 /* HOST Control Register */ +#define HOST_STATUS 0xffc03a04 /* HOST Status Register */ +#define HOST_TIMEOUT 0xffc03a08 /* HOST Acknowledge Mode Timeout Register */ + +/* USB Control Registers */ + +#define USB_FADDR 0xffc03c00 /* Function address register */ +#define USB_POWER 0xffc03c04 /* Power management register */ +#define USB_INTRTX 0xffc03c08 /* Interrupt register for endpoint 0 and Tx endpoint 1 to 7 */ +#define USB_INTRRX 0xffc03c0c /* Interrupt register for Rx endpoints 1 to 7 */ +#define USB_INTRTXE 0xffc03c10 /* Interrupt enable register for IntrTx */ +#define USB_INTRRXE 0xffc03c14 /* Interrupt enable register for IntrRx */ +#define USB_INTRUSB 0xffc03c18 /* Interrupt register for common USB interrupts */ +#define USB_INTRUSBE 0xffc03c1c /* Interrupt enable register for IntrUSB */ +#define USB_FRAME 0xffc03c20 /* USB frame number */ +#define USB_INDEX 0xffc03c24 /* Index register for selecting the indexed endpoint registers */ +#define USB_TESTMODE 0xffc03c28 /* Enabled USB 20 test modes */ +#define USB_GLOBINTR 0xffc03c2c /* Global Interrupt Mask register and Wakeup Exception Interrupt */ +#define USB_GLOBAL_CTL 0xffc03c30 /* Global Clock Control for the core */ + +/* USB Packet Control Registers */ + +#define USB_TX_MAX_PACKET 0xffc03c40 /* Maximum packet size for Host Tx endpoint */ +#define USB_CSR0 0xffc03c44 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */ +#define USB_TXCSR 0xffc03c44 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */ +#define USB_RX_MAX_PACKET 0xffc03c48 /* Maximum packet size for Host Rx endpoint */ +#define USB_RXCSR 0xffc03c4c /* Control Status register for Host Rx endpoint */ +#define USB_COUNT0 0xffc03c50 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */ +#define USB_RXCOUNT 0xffc03c50 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */ +#define USB_TXTYPE 0xffc03c54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint */ +#define USB_NAKLIMIT0 0xffc03c58 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */ +#define USB_TXINTERVAL 0xffc03c58 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */ +#define USB_RXTYPE 0xffc03c5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint */ +#define USB_RXINTERVAL 0xffc03c60 /* Sets the polling interval for Interrupt and Isochronous transfers or the NAK response timeout on Bulk transfers */ +#define USB_TXCOUNT 0xffc03c68 /* Number of bytes to be written to the selected endpoint Tx FIFO */ + +/* USB Endpoint FIFO Registers */ + +#define USB_EP0_FIFO 0xffc03c80 /* Endpoint 0 FIFO */ +#define USB_EP1_FIFO 0xffc03c88 /* Endpoint 1 FIFO */ +#define USB_EP2_FIFO 0xffc03c90 /* Endpoint 2 FIFO */ +#define USB_EP3_FIFO 0xffc03c98 /* Endpoint 3 FIFO */ +#define USB_EP4_FIFO 0xffc03ca0 /* Endpoint 4 FIFO */ +#define USB_EP5_FIFO 0xffc03ca8 /* Endpoint 5 FIFO */ +#define USB_EP6_FIFO 0xffc03cb0 /* Endpoint 6 FIFO */ +#define USB_EP7_FIFO 0xffc03cb8 /* Endpoint 7 FIFO */ + +/* USB OTG Control Registers */ + +#define USB_OTG_DEV_CTL 0xffc03d00 /* OTG Device Control Register */ +#define USB_OTG_VBUS_IRQ 0xffc03d04 /* OTG VBUS Control Interrupts */ +#define USB_OTG_VBUS_MASK 0xffc03d08 /* VBUS Control Interrupt Enable */ + +/* USB Phy Control Registers */ + +#define USB_LINKINFO 0xffc03d48 /* Enables programming of some PHY-side delays */ +#define USB_VPLEN 0xffc03d4c /* Determines duration of VBUS pulse for VBUS charging */ +#define USB_HS_EOF1 0xffc03d50 /* Time buffer for High-Speed transactions */ +#define USB_FS_EOF1 0xffc03d54 /* Time buffer for Full-Speed transactions */ +#define USB_LS_EOF1 0xffc03d58 /* Time buffer for Low-Speed transactions */ + +/* (APHY_CNTRL is for ADI usage only) */ + +#define USB_APHY_CNTRL 0xffc03de0 /* Register that increases visibility of Analog PHY */ + +/* (APHY_CALIB is for ADI usage only) */ + +#define USB_APHY_CALIB 0xffc03de4 /* Register used to set some calibration values */ +#define USB_APHY_CNTRL2 0xffc03de8 /* Register used to prevent re-enumeration once Moab goes into hibernate mode */ + +/* (PHY_TEST is for ADI usage only) */ + +#define USB_PHY_TEST 0xffc03dec /* Used for reducing simulation time and simplifies FIFO testability */ +#define USB_PLLOSC_CTRL 0xffc03df0 /* Used to program different parameters for USB PLL and Oscillator */ +#define USB_SRP_CLKDIV 0xffc03df4 /* Used to program clock divide value for the clock fed to the SRP detection logic */ + +/* USB Endpoint 0 Control Registers */ + +#define USB_EP_NI0_TXMAXP 0xffc03e00 /* Maximum packet size for Host Tx endpoint0 */ +#define USB_EP_NI0_TXCSR 0xffc03e04 /* Control Status register for endpoint 0 */ +#define USB_EP_NI0_RXMAXP 0xffc03e08 /* Maximum packet size for Host Rx endpoint0 */ +#define USB_EP_NI0_RXCSR 0xffc03e0c /* Control Status register for Host Rx endpoint0 */ +#define USB_EP_NI0_RXCOUNT 0xffc03e10 /* Number of bytes received in endpoint 0 FIFO */ +#define USB_EP_NI0_TXTYPE 0xffc03e14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint0 */ +#define USB_EP_NI0_TXINTERVAL 0xffc03e18 /* Sets the NAK response timeout on Endpoint 0 */ +#define USB_EP_NI0_RXTYPE 0xffc03e1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint0 */ +#define USB_EP_NI0_RXINTERVAL 0xffc03e20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint0 */ + +/* USB Endpoint 1 Control Registers */ + +#define USB_EP_NI0_TXCOUNT 0xffc03e28 /* Number of bytes to be written to the endpoint0 Tx FIFO */ +#define USB_EP_NI1_TXMAXP 0xffc03e40 /* Maximum packet size for Host Tx endpoint1 */ +#define USB_EP_NI1_TXCSR 0xffc03e44 /* Control Status register for endpoint1 */ +#define USB_EP_NI1_RXMAXP 0xffc03e48 /* Maximum packet size for Host Rx endpoint1 */ +#define USB_EP_NI1_RXCSR 0xffc03e4c /* Control Status register for Host Rx endpoint1 */ +#define USB_EP_NI1_RXCOUNT 0xffc03e50 /* Number of bytes received in endpoint1 FIFO */ +#define USB_EP_NI1_TXTYPE 0xffc03e54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint1 */ +#define USB_EP_NI1_TXINTERVAL 0xffc03e58 /* Sets the NAK response timeout on Endpoint1 */ +#define USB_EP_NI1_RXTYPE 0xffc03e5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint1 */ +#define USB_EP_NI1_RXINTERVAL 0xffc03e60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint1 */ + +/* USB Endpoint 2 Control Registers */ + +#define USB_EP_NI1_TXCOUNT 0xffc03e68 /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */ +#define USB_EP_NI2_TXMAXP 0xffc03e80 /* Maximum packet size for Host Tx endpoint2 */ +#define USB_EP_NI2_TXCSR 0xffc03e84 /* Control Status register for endpoint2 */ +#define USB_EP_NI2_RXMAXP 0xffc03e88 /* Maximum packet size for Host Rx endpoint2 */ +#define USB_EP_NI2_RXCSR 0xffc03e8c /* Control Status register for Host Rx endpoint2 */ +#define USB_EP_NI2_RXCOUNT 0xffc03e90 /* Number of bytes received in endpoint2 FIFO */ +#define USB_EP_NI2_TXTYPE 0xffc03e94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint2 */ +#define USB_EP_NI2_TXINTERVAL 0xffc03e98 /* Sets the NAK response timeout on Endpoint2 */ +#define USB_EP_NI2_RXTYPE 0xffc03e9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint2 */ +#define USB_EP_NI2_RXINTERVAL 0xffc03ea0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint2 */ + +/* USB Endpoint 3 Control Registers */ + +#define USB_EP_NI2_TXCOUNT 0xffc03ea8 /* Number of bytes to be written to the endpoint2 Tx FIFO */ +#define USB_EP_NI3_TXMAXP 0xffc03ec0 /* Maximum packet size for Host Tx endpoint3 */ +#define USB_EP_NI3_TXCSR 0xffc03ec4 /* Control Status register for endpoint3 */ +#define USB_EP_NI3_RXMAXP 0xffc03ec8 /* Maximum packet size for Host Rx endpoint3 */ +#define USB_EP_NI3_RXCSR 0xffc03ecc /* Control Status register for Host Rx endpoint3 */ +#define USB_EP_NI3_RXCOUNT 0xffc03ed0 /* Number of bytes received in endpoint3 FIFO */ +#define USB_EP_NI3_TXTYPE 0xffc03ed4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint3 */ +#define USB_EP_NI3_TXINTERVAL 0xffc03ed8 /* Sets the NAK response timeout on Endpoint3 */ +#define USB_EP_NI3_RXTYPE 0xffc03edc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint3 */ +#define USB_EP_NI3_RXINTERVAL 0xffc03ee0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint3 */ + +/* USB Endpoint 4 Control Registers */ + +#define USB_EP_NI3_TXCOUNT 0xffc03ee8 /* Number of bytes to be written to the H124endpoint3 Tx FIFO */ +#define USB_EP_NI4_TXMAXP 0xffc03f00 /* Maximum packet size for Host Tx endpoint4 */ +#define USB_EP_NI4_TXCSR 0xffc03f04 /* Control Status register for endpoint4 */ +#define USB_EP_NI4_RXMAXP 0xffc03f08 /* Maximum packet size for Host Rx endpoint4 */ +#define USB_EP_NI4_RXCSR 0xffc03f0c /* Control Status register for Host Rx endpoint4 */ +#define USB_EP_NI4_RXCOUNT 0xffc03f10 /* Number of bytes received in endpoint4 FIFO */ +#define USB_EP_NI4_TXTYPE 0xffc03f14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint4 */ +#define USB_EP_NI4_TXINTERVAL 0xffc03f18 /* Sets the NAK response timeout on Endpoint4 */ +#define USB_EP_NI4_RXTYPE 0xffc03f1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint4 */ +#define USB_EP_NI4_RXINTERVAL 0xffc03f20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint4 */ + +/* USB Endpoint 5 Control Registers */ + +#define USB_EP_NI4_TXCOUNT 0xffc03f28 /* Number of bytes to be written to the endpoint4 Tx FIFO */ +#define USB_EP_NI5_TXMAXP 0xffc03f40 /* Maximum packet size for Host Tx endpoint5 */ +#define USB_EP_NI5_TXCSR 0xffc03f44 /* Control Status register for endpoint5 */ +#define USB_EP_NI5_RXMAXP 0xffc03f48 /* Maximum packet size for Host Rx endpoint5 */ +#define USB_EP_NI5_RXCSR 0xffc03f4c /* Control Status register for Host Rx endpoint5 */ +#define USB_EP_NI5_RXCOUNT 0xffc03f50 /* Number of bytes received in endpoint5 FIFO */ +#define USB_EP_NI5_TXTYPE 0xffc03f54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint5 */ +#define USB_EP_NI5_TXINTERVAL 0xffc03f58 /* Sets the NAK response timeout on Endpoint5 */ +#define USB_EP_NI5_RXTYPE 0xffc03f5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint5 */ +#define USB_EP_NI5_RXINTERVAL 0xffc03f60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint5 */ + +/* USB Endpoint 6 Control Registers */ + +#define USB_EP_NI5_TXCOUNT 0xffc03f68 /* Number of bytes to be written to the H145endpoint5 Tx FIFO */ +#define USB_EP_NI6_TXMAXP 0xffc03f80 /* Maximum packet size for Host Tx endpoint6 */ +#define USB_EP_NI6_TXCSR 0xffc03f84 /* Control Status register for endpoint6 */ +#define USB_EP_NI6_RXMAXP 0xffc03f88 /* Maximum packet size for Host Rx endpoint6 */ +#define USB_EP_NI6_RXCSR 0xffc03f8c /* Control Status register for Host Rx endpoint6 */ +#define USB_EP_NI6_RXCOUNT 0xffc03f90 /* Number of bytes received in endpoint6 FIFO */ +#define USB_EP_NI6_TXTYPE 0xffc03f94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint6 */ +#define USB_EP_NI6_TXINTERVAL 0xffc03f98 /* Sets the NAK response timeout on Endpoint6 */ +#define USB_EP_NI6_RXTYPE 0xffc03f9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint6 */ +#define USB_EP_NI6_RXINTERVAL 0xffc03fa0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint6 */ + +/* USB Endpoint 7 Control Registers */ + +#define USB_EP_NI6_TXCOUNT 0xffc03fa8 /* Number of bytes to be written to the endpoint6 Tx FIFO */ +#define USB_EP_NI7_TXMAXP 0xffc03fc0 /* Maximum packet size for Host Tx endpoint7 */ +#define USB_EP_NI7_TXCSR 0xffc03fc4 /* Control Status register for endpoint7 */ +#define USB_EP_NI7_RXMAXP 0xffc03fc8 /* Maximum packet size for Host Rx endpoint7 */ +#define USB_EP_NI7_RXCSR 0xffc03fcc /* Control Status register for Host Rx endpoint7 */ +#define USB_EP_NI7_RXCOUNT 0xffc03fd0 /* Number of bytes received in endpoint7 FIFO */ +#define USB_EP_NI7_TXTYPE 0xffc03fd4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */ +#define USB_EP_NI7_TXINTERVAL 0xffc03fd8 /* Sets the NAK response timeout on Endpoint7 */ +#define USB_EP_NI7_RXTYPE 0xffc03fdc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */ +#define USB_EP_NI7_RXINTERVAL 0xffc03ff0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */ +#define USB_EP_NI7_TXCOUNT 0xffc03ff8 /* Number of bytes to be written to the endpoint7 Tx FIFO */ +#define USB_DMA_INTERRUPT 0xffc04000 /* Indicates pending interrupts for the DMA channels */ + +/* USB Channel 0 Config Registers */ + +#define USB_DMA0CONTROL 0xffc04004 /* DMA master channel 0 configuration */ +#define USB_DMA0ADDRLOW 0xffc04008 /* Lower 16-bits of memory source/destination address for DMA master channel 0 */ +#define USB_DMA0ADDRHIGH 0xffc0400c /* Upper 16-bits of memory source/destination address for DMA master channel 0 */ +#define USB_DMA0COUNTLOW 0xffc04010 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 0 */ +#define USB_DMA0COUNTHIGH 0xffc04014 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 0 */ + +/* USB Channel 1 Config Registers */ + +#define USB_DMA1CONTROL 0xffc04024 /* DMA master channel 1 configuration */ +#define USB_DMA1ADDRLOW 0xffc04028 /* Lower 16-bits of memory source/destination address for DMA master channel 1 */ +#define USB_DMA1ADDRHIGH 0xffc0402c /* Upper 16-bits of memory source/destination address for DMA master channel 1 */ +#define USB_DMA1COUNTLOW 0xffc04030 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 1 */ +#define USB_DMA1COUNTHIGH 0xffc04034 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 1 */ + +/* USB Channel 2 Config Registers */ + +#define USB_DMA2CONTROL 0xffc04044 /* DMA master channel 2 configuration */ +#define USB_DMA2ADDRLOW 0xffc04048 /* Lower 16-bits of memory source/destination address for DMA master channel 2 */ +#define USB_DMA2ADDRHIGH 0xffc0404c /* Upper 16-bits of memory source/destination address for DMA master channel 2 */ +#define USB_DMA2COUNTLOW 0xffc04050 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 2 */ +#define USB_DMA2COUNTHIGH 0xffc04054 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 2 */ + +/* USB Channel 3 Config Registers */ + +#define USB_DMA3CONTROL 0xffc04064 /* DMA master channel 3 configuration */ +#define USB_DMA3ADDRLOW 0xffc04068 /* Lower 16-bits of memory source/destination address for DMA master channel 3 */ +#define USB_DMA3ADDRHIGH 0xffc0406c /* Upper 16-bits of memory source/destination address for DMA master channel 3 */ +#define USB_DMA3COUNTLOW 0xffc04070 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 3 */ +#define USB_DMA3COUNTHIGH 0xffc04074 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 3 */ + +/* USB Channel 4 Config Registers */ + +#define USB_DMA4CONTROL 0xffc04084 /* DMA master channel 4 configuration */ +#define USB_DMA4ADDRLOW 0xffc04088 /* Lower 16-bits of memory source/destination address for DMA master channel 4 */ +#define USB_DMA4ADDRHIGH 0xffc0408c /* Upper 16-bits of memory source/destination address for DMA master channel 4 */ +#define USB_DMA4COUNTLOW 0xffc04090 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 4 */ +#define USB_DMA4COUNTHIGH 0xffc04094 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 4 */ + +/* USB Channel 5 Config Registers */ + +#define USB_DMA5CONTROL 0xffc040a4 /* DMA master channel 5 configuration */ +#define USB_DMA5ADDRLOW 0xffc040a8 /* Lower 16-bits of memory source/destination address for DMA master channel 5 */ +#define USB_DMA5ADDRHIGH 0xffc040ac /* Upper 16-bits of memory source/destination address for DMA master channel 5 */ +#define USB_DMA5COUNTLOW 0xffc040b0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 5 */ +#define USB_DMA5COUNTHIGH 0xffc040b4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 5 */ + +/* USB Channel 6 Config Registers */ + +#define USB_DMA6CONTROL 0xffc040c4 /* DMA master channel 6 configuration */ +#define USB_DMA6ADDRLOW 0xffc040c8 /* Lower 16-bits of memory source/destination address for DMA master channel 6 */ +#define USB_DMA6ADDRHIGH 0xffc040cc /* Upper 16-bits of memory source/destination address for DMA master channel 6 */ +#define USB_DMA6COUNTLOW 0xffc040d0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 6 */ +#define USB_DMA6COUNTHIGH 0xffc040d4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 6 */ + +/* USB Channel 7 Config Registers */ + +#define USB_DMA7CONTROL 0xffc040e4 /* DMA master channel 7 configuration */ +#define USB_DMA7ADDRLOW 0xffc040e8 /* Lower 16-bits of memory source/destination address for DMA master channel 7 */ +#define USB_DMA7ADDRHIGH 0xffc040ec /* Upper 16-bits of memory source/destination address for DMA master channel 7 */ +#define USB_DMA7COUNTLOW 0xffc040f0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 7 */ +#define USB_DMA7COUNTHIGH 0xffc040f4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 7 */ + +/* Keypad Registers */ + +#define KPAD_CTL 0xffc04100 /* Controls keypad module enable and disable */ +#define KPAD_PRESCALE 0xffc04104 /* Establish a time base for programing the KPAD_MSEL register */ +#define KPAD_MSEL 0xffc04108 /* Selects delay parameters for keypad interface sensitivity */ +#define KPAD_ROWCOL 0xffc0410c /* Captures the row and column output values of the keys pressed */ +#define KPAD_STAT 0xffc04110 /* Holds and clears the status of the keypad interface interrupt */ +#define KPAD_SOFTEVAL 0xffc04114 /* Lets software force keypad interface to check for keys being pressed */ + +/* Pixel Compositor (PIXC) Registers */ + +#define PIXC_CTL 0xffc04400 /* Overlay enable, resampling mode, I/O data format, transparency enable, watermark level, FIFO status */ +#define PIXC_PPL 0xffc04404 /* Holds the number of pixels per line of the display */ +#define PIXC_LPF 0xffc04408 /* Holds the number of lines per frame of the display */ +#define PIXC_AHSTART 0xffc0440c /* Contains horizontal start pixel information of the overlay data (set A) */ +#define PIXC_AHEND 0xffc04410 /* Contains horizontal end pixel information of the overlay data (set A) */ +#define PIXC_AVSTART 0xffc04414 /* Contains vertical start pixel information of the overlay data (set A) */ +#define PIXC_AVEND 0xffc04418 /* Contains vertical end pixel information of the overlay data (set A) */ +#define PIXC_ATRANSP 0xffc0441c /* Contains the transparency ratio (set A) */ +#define PIXC_BHSTART 0xffc04420 /* Contains horizontal start pixel information of the overlay data (set B) */ +#define PIXC_BHEND 0xffc04424 /* Contains horizontal end pixel information of the overlay data (set B) */ +#define PIXC_BVSTART 0xffc04428 /* Contains vertical start pixel information of the overlay data (set B) */ +#define PIXC_BVEND 0xffc0442c /* Contains vertical end pixel information of the overlay data (set B) */ +#define PIXC_BTRANSP 0xffc04430 /* Contains the transparency ratio (set B) */ +#define PIXC_INTRSTAT 0xffc0443c /* Overlay interrupt configuration/status */ +#define PIXC_RYCON 0xffc04440 /* Color space conversion matrix register. Contains the R/Y conversion coefficients */ +#define PIXC_GUCON 0xffc04444 /* Color space conversion matrix register. Contains the G/U conversion coefficients */ +#define PIXC_BVCON 0xffc04448 /* Color space conversion matrix register. Contains the B/V conversion coefficients */ +#define PIXC_CCBIAS 0xffc0444c /* Bias values for the color space conversion matrix */ +#define PIXC_TC 0xffc04450 /* Holds the transparent color value */ + +/* Handshake MDMA 0 Registers */ + +#define HMDMA0_CONTROL 0xffc04500 /* Handshake MDMA0 Control Register */ +#define HMDMA0_ECINIT 0xffc04504 /* Handshake MDMA0 Initial Edge Count Register */ +#define HMDMA0_BCINIT 0xffc04508 /* Handshake MDMA0 Initial Block Count Register */ +#define HMDMA0_ECURGENT 0xffc0450c /* Handshake MDMA0 Urgent Edge Count Threshhold Register */ +#define HMDMA0_ECOVERFLOW 0xffc04510 /* Handshake MDMA0 Edge Count Overflow Interrupt Register */ +#define HMDMA0_ECOUNT 0xffc04514 /* Handshake MDMA0 Current Edge Count Register */ +#define HMDMA0_BCOUNT 0xffc04518 /* Handshake MDMA0 Current Block Count Register */ + +/* Handshake MDMA 1 Registers */ + +#define HMDMA1_CONTROL 0xffc04540 /* Handshake MDMA1 Control Register */ +#define HMDMA1_ECINIT 0xffc04544 /* Handshake MDMA1 Initial Edge Count Register */ +#define HMDMA1_BCINIT 0xffc04548 /* Handshake MDMA1 Initial Block Count Register */ +#define HMDMA1_ECURGENT 0xffc0454c /* Handshake MDMA1 Urgent Edge Count Threshhold Register */ +#define HMDMA1_ECOVERFLOW 0xffc04550 /* Handshake MDMA1 Edge Count Overflow Interrupt Register */ +#define HMDMA1_ECOUNT 0xffc04554 /* Handshake MDMA1 Current Edge Count Register */ +#define HMDMA1_BCOUNT 0xffc04558 /* Handshake MDMA1 Current Block Count Register */ + + +/* ********************************************************** */ +/* SINGLE BIT MACRO PAIRS (bit mask and negated one) */ +/* and MULTI BIT READ MACROS */ +/* ********************************************************** */ + +/* Bit masks for PIXC_CTL */ + +#define PIXC_EN 0x1 /* Pixel Compositor Enable */ +#define nPIXC_EN 0x0 +#define OVR_A_EN 0x2 /* Overlay A Enable */ +#define nOVR_A_EN 0x0 +#define OVR_B_EN 0x4 /* Overlay B Enable */ +#define nOVR_B_EN 0x0 +#define IMG_FORM 0x8 /* Image Data Format */ +#define nIMG_FORM 0x0 +#define OVR_FORM 0x10 /* Overlay Data Format */ +#define nOVR_FORM 0x0 +#define OUT_FORM 0x20 /* Output Data Format */ +#define nOUT_FORM 0x0 +#define UDS_MOD 0x40 /* Resampling Mode */ +#define nUDS_MOD 0x0 +#define TC_EN 0x80 /* Transparent Color Enable */ +#define nTC_EN 0x0 +#define IMG_STAT 0x300 /* Image FIFO Status */ +#define OVR_STAT 0xc00 /* Overlay FIFO Status */ +#define WM_LVL 0x3000 /* FIFO Watermark Level */ + +/* Bit masks for PIXC_AHSTART */ + +#define A_HSTART 0xfff /* Horizontal Start Coordinates */ + +/* Bit masks for PIXC_AHEND */ + +#define A_HEND 0xfff /* Horizontal End Coordinates */ + +/* Bit masks for PIXC_AVSTART */ + +#define A_VSTART 0x3ff /* Vertical Start Coordinates */ + +/* Bit masks for PIXC_AVEND */ + +#define A_VEND 0x3ff /* Vertical End Coordinates */ + +/* Bit masks for PIXC_ATRANSP */ + +#define A_TRANSP 0xf /* Transparency Value */ + +/* Bit masks for PIXC_BHSTART */ + +#define B_HSTART 0xfff /* Horizontal Start Coordinates */ + +/* Bit masks for PIXC_BHEND */ + +#define B_HEND 0xfff /* Horizontal End Coordinates */ + +/* Bit masks for PIXC_BVSTART */ + +#define B_VSTART 0x3ff /* Vertical Start Coordinates */ + +/* Bit masks for PIXC_BVEND */ + +#define B_VEND 0x3ff /* Vertical End Coordinates */ + +/* Bit masks for PIXC_BTRANSP */ + +#define B_TRANSP 0xf /* Transparency Value */ + +/* Bit masks for PIXC_INTRSTAT */ + +#define OVR_INT_EN 0x1 /* Interrupt at End of Last Valid Overlay */ +#define nOVR_INT_EN 0x0 +#define FRM_INT_EN 0x2 /* Interrupt at End of Frame */ +#define nFRM_INT_EN 0x0 +#define OVR_INT_STAT 0x4 /* Overlay Interrupt Status */ +#define nOVR_INT_STAT 0x0 +#define FRM_INT_STAT 0x8 /* Frame Interrupt Status */ +#define nFRM_INT_STAT 0x0 + +/* Bit masks for PIXC_RYCON */ + +#define A11 0x3ff /* A11 in the Coefficient Matrix */ +#define A12 0xffc00 /* A12 in the Coefficient Matrix */ +#define A13 0x3ff00000 /* A13 in the Coefficient Matrix */ +#define RY_MULT4 0x40000000 /* Multiply Row by 4 */ +#define nRY_MULT4 0x0 + +/* Bit masks for PIXC_GUCON */ + +#define A21 0x3ff /* A21 in the Coefficient Matrix */ +#define A22 0xffc00 /* A22 in the Coefficient Matrix */ +#define A23 0x3ff00000 /* A23 in the Coefficient Matrix */ +#define GU_MULT4 0x40000000 /* Multiply Row by 4 */ +#define nGU_MULT4 0x0 + +/* Bit masks for PIXC_BVCON */ + +#define A31 0x3ff /* A31 in the Coefficient Matrix */ +#define A32 0xffc00 /* A32 in the Coefficient Matrix */ +#define A33 0x3ff00000 /* A33 in the Coefficient Matrix */ +#define BV_MULT4 0x40000000 /* Multiply Row by 4 */ +#define nBV_MULT4 0x0 + +/* Bit masks for PIXC_CCBIAS */ + +#define A14 0x3ff /* A14 in the Bias Vector */ +#define A24 0xffc00 /* A24 in the Bias Vector */ +#define A34 0x3ff00000 /* A34 in the Bias Vector */ + +/* Bit masks for PIXC_TC */ + +#define RY_TRANS 0xff /* Transparent Color - R/Y Component */ +#define GU_TRANS 0xff00 /* Transparent Color - G/U Component */ +#define BV_TRANS 0xff0000 /* Transparent Color - B/V Component */ + +/* Bit masks for HOST_CONTROL */ + +#define HOST_EN 0x1 /* Host Enable */ +#define nHOST_EN 0x0 +#define HOST_END 0x2 /* Host Endianess */ +#define nHOST_END 0x0 +#define DATA_SIZE 0x4 /* Data Size */ +#define nDATA_SIZE 0x0 +#define HOST_RST 0x8 /* Host Reset */ +#define nHOST_RST 0x0 +#define HRDY_OVR 0x20 /* Host Ready Override */ +#define nHRDY_OVR 0x0 +#define INT_MODE 0x40 /* Interrupt Mode */ +#define nINT_MODE 0x0 +#define BT_EN 0x80 /* Bus Timeout Enable */ +#define nBT_EN 0x0 +#define EHW 0x100 /* Enable Host Write */ +#define nEHW 0x0 +#define EHR 0x200 /* Enable Host Read */ +#define nEHR 0x0 +#define BDR 0x400 /* Burst DMA Requests */ +#define nBDR 0x0 + +/* Bit masks for HOST_STATUS */ + +#define READY 0x1 /* DMA Ready */ +#define nREADY 0x0 +#define FIFOFULL 0x2 /* FIFO Full */ +#define nFIFOFULL 0x0 +#define FIFOEMPTY 0x4 /* FIFO Empty */ +#define nFIFOEMPTY 0x0 +#define COMPLETE 0x8 /* DMA Complete */ +#define nCOMPLETE 0x0 +#define HSHK 0x10 /* Host Handshake */ +#define nHSHK 0x0 +#define TIMEOUT 0x20 /* Host Timeout */ +#define nTIMEOUT 0x0 +#define HIRQ 0x40 /* Host Interrupt Request */ +#define nHIRQ 0x0 +#define ALLOW_CNFG 0x80 /* Allow New Configuration */ +#define nALLOW_CNFG 0x0 +#define DMA_DIR 0x100 /* DMA Direction */ +#define nDMA_DIR 0x0 +#define BTE 0x200 /* Bus Timeout Enabled */ +#define nBTE 0x0 + +/* Bit masks for HOST_TIMEOUT */ + +#define COUNT_TIMEOUT 0x7ff /* Host Timeout count */ + +/* Bit masks for KPAD_CTL */ + +#define KPAD_EN 0x1 /* Keypad Enable */ +#define nKPAD_EN 0x0 +#define KPAD_IRQMODE 0x6 /* Key Press Interrupt Enable */ +#define KPAD_ROWEN 0x1c00 /* Row Enable Width */ +#define KPAD_COLEN 0xe000 /* Column Enable Width */ + +/* Bit masks for KPAD_PRESCALE */ + +#define KPAD_PRESCALE_VAL 0x3f /* Key Prescale Value */ + +/* Bit masks for KPAD_MSEL */ + +#define DBON_SCALE 0xff /* Debounce Scale Value */ +#define COLDRV_SCALE 0xff00 /* Column Driver Scale Value */ + +/* Bit masks for KPAD_ROWCOL */ + +#define KPAD_ROW 0xff /* Rows Pressed */ +#define KPAD_COL 0xff00 /* Columns Pressed */ + +/* Bit masks for KPAD_STAT */ + +#define KPAD_IRQ 0x1 /* Keypad Interrupt Status */ +#define nKPAD_IRQ 0x0 +#define KPAD_MROWCOL 0x6 /* Multiple Row/Column Keypress Status */ +#define KPAD_PRESSED 0x8 /* Key press current status */ +#define nKPAD_PRESSED 0x0 + +/* Bit masks for KPAD_SOFTEVAL */ + +#define KPAD_SOFTEVAL_E 0x2 /* Software Programmable Force Evaluate */ +#define nKPAD_SOFTEVAL_E 0x0 + +/* Bit masks for SDH_COMMAND */ + +#define CMD_IDX 0x3f /* Command Index */ +#define CMD_RSP 0x40 /* Response */ +#define nCMD_RSP 0x0 +#define CMD_L_RSP 0x80 /* Long Response */ +#define nCMD_L_RSP 0x0 +#define CMD_INT_E 0x100 /* Command Interrupt */ +#define nCMD_INT_E 0x0 +#define CMD_PEND_E 0x200 /* Command Pending */ +#define nCMD_PEND_E 0x0 +#define CMD_E 0x400 /* Command Enable */ +#define nCMD_E 0x0 + +/* Bit masks for SDH_PWR_CTL */ + +#define PWR_ON 0x3 /* Power On */ +#if 0 +#define TBD 0x3c /* TBD */ +#endif +#define SD_CMD_OD 0x40 /* Open Drain Output */ +#define nSD_CMD_OD 0x0 +#define ROD_CTL 0x80 /* Rod Control */ +#define nROD_CTL 0x0 + +/* Bit masks for SDH_CLK_CTL */ + +#define CLKDIV 0xff /* MC_CLK Divisor */ +#define CLK_E 0x100 /* MC_CLK Bus Clock Enable */ +#define nCLK_E 0x0 +#define PWR_SV_E 0x200 /* Power Save Enable */ +#define nPWR_SV_E 0x0 +#define CLKDIV_BYPASS 0x400 /* Bypass Divisor */ +#define nCLKDIV_BYPASS 0x0 +#define WIDE_BUS 0x800 /* Wide Bus Mode Enable */ +#define nWIDE_BUS 0x0 + +/* Bit masks for SDH_RESP_CMD */ + +#define RESP_CMD 0x3f /* Response Command */ + +/* Bit masks for SDH_DATA_CTL */ + +#define DTX_E 0x1 /* Data Transfer Enable */ +#define nDTX_E 0x0 +#define DTX_DIR 0x2 /* Data Transfer Direction */ +#define nDTX_DIR 0x0 +#define DTX_MODE 0x4 /* Data Transfer Mode */ +#define nDTX_MODE 0x0 +#define DTX_DMA_E 0x8 /* Data Transfer DMA Enable */ +#define nDTX_DMA_E 0x0 +#define DTX_BLK_LGTH 0xf0 /* Data Transfer Block Length */ + +/* Bit masks for SDH_STATUS */ + +#define CMD_CRC_FAIL 0x1 /* CMD CRC Fail */ +#define nCMD_CRC_FAIL 0x0 +#define DAT_CRC_FAIL 0x2 /* Data CRC Fail */ +#define nDAT_CRC_FAIL 0x0 +#define CMD_TIMEOUT 0x4 /* CMD Time Out */ +#define nCMD_TIMEOUT 0x0 +#define DAT_TIMEOUT 0x8 /* Data Time Out */ +#define nDAT_TIMEOUT 0x0 +#define TX_UNDERRUN 0x10 /* Transmit Underrun */ +#define nTX_UNDERRUN 0x0 +#define RX_OVERRUN 0x20 /* Receive Overrun */ +#define nRX_OVERRUN 0x0 +#define CMD_RESP_END 0x40 /* CMD Response End */ +#define nCMD_RESP_END 0x0 +#define CMD_SENT 0x80 /* CMD Sent */ +#define nCMD_SENT 0x0 +#define DAT_END 0x100 /* Data End */ +#define nDAT_END 0x0 +#define START_BIT_ERR 0x200 /* Start Bit Error */ +#define nSTART_BIT_ERR 0x0 +#define DAT_BLK_END 0x400 /* Data Block End */ +#define nDAT_BLK_END 0x0 +#define CMD_ACT 0x800 /* CMD Active */ +#define nCMD_ACT 0x0 +#define TX_ACT 0x1000 /* Transmit Active */ +#define nTX_ACT 0x0 +#define RX_ACT 0x2000 /* Receive Active */ +#define nRX_ACT 0x0 +#define TX_FIFO_STAT 0x4000 /* Transmit FIFO Status */ +#define nTX_FIFO_STAT 0x0 +#define RX_FIFO_STAT 0x8000 /* Receive FIFO Status */ +#define nRX_FIFO_STAT 0x0 +#define TX_FIFO_FULL 0x10000 /* Transmit FIFO Full */ +#define nTX_FIFO_FULL 0x0 +#define RX_FIFO_FULL 0x20000 /* Receive FIFO Full */ +#define nRX_FIFO_FULL 0x0 +#define TX_FIFO_ZERO 0x40000 /* Transmit FIFO Empty */ +#define nTX_FIFO_ZERO 0x0 +#define RX_DAT_ZERO 0x80000 /* Receive FIFO Empty */ +#define nRX_DAT_ZERO 0x0 +#define TX_DAT_RDY 0x100000 /* Transmit Data Available */ +#define nTX_DAT_RDY 0x0 +#define RX_FIFO_RDY 0x200000 /* Receive Data Available */ +#define nRX_FIFO_RDY 0x0 + +/* Bit masks for SDH_STATUS_CLR */ + +#define CMD_CRC_FAIL_STAT 0x1 /* CMD CRC Fail Status */ +#define nCMD_CRC_FAIL_STAT 0x0 +#define DAT_CRC_FAIL_STAT 0x2 /* Data CRC Fail Status */ +#define nDAT_CRC_FAIL_STAT 0x0 +#define CMD_TIMEOUT_STAT 0x4 /* CMD Time Out Status */ +#define nCMD_TIMEOUT_STAT 0x0 +#define DAT_TIMEOUT_STAT 0x8 /* Data Time Out status */ +#define nDAT_TIMEOUT_STAT 0x0 +#define TX_UNDERRUN_STAT 0x10 /* Transmit Underrun Status */ +#define nTX_UNDERRUN_STAT 0x0 +#define RX_OVERRUN_STAT 0x20 /* Receive Overrun Status */ +#define nRX_OVERRUN_STAT 0x0 +#define CMD_RESP_END_STAT 0x40 /* CMD Response End Status */ +#define nCMD_RESP_END_STAT 0x0 +#define CMD_SENT_STAT 0x80 /* CMD Sent Status */ +#define nCMD_SENT_STAT 0x0 +#define DAT_END_STAT 0x100 /* Data End Status */ +#define nDAT_END_STAT 0x0 +#define START_BIT_ERR_STAT 0x200 /* Start Bit Error Status */ +#define nSTART_BIT_ERR_STAT 0x0 +#define DAT_BLK_END_STAT 0x400 /* Data Block End Status */ +#define nDAT_BLK_END_STAT 0x0 + +/* Bit masks for SDH_MASK0 */ + +#define CMD_CRC_FAIL_MASK 0x1 /* CMD CRC Fail Mask */ +#define nCMD_CRC_FAIL_MASK 0x0 +#define DAT_CRC_FAIL_MASK 0x2 /* Data CRC Fail Mask */ +#define nDAT_CRC_FAIL_MASK 0x0 +#define CMD_TIMEOUT_MASK 0x4 /* CMD Time Out Mask */ +#define nCMD_TIMEOUT_MASK 0x0 +#define DAT_TIMEOUT_MASK 0x8 /* Data Time Out Mask */ +#define nDAT_TIMEOUT_MASK 0x0 +#define TX_UNDERRUN_MASK 0x10 /* Transmit Underrun Mask */ +#define nTX_UNDERRUN_MASK 0x0 +#define RX_OVERRUN_MASK 0x20 /* Receive Overrun Mask */ +#define nRX_OVERRUN_MASK 0x0 +#define CMD_RESP_END_MASK 0x40 /* CMD Response End Mask */ +#define nCMD_RESP_END_MASK 0x0 +#define CMD_SENT_MASK 0x80 /* CMD Sent Mask */ +#define nCMD_SENT_MASK 0x0 +#define DAT_END_MASK 0x100 /* Data End Mask */ +#define nDAT_END_MASK 0x0 +#define START_BIT_ERR_MASK 0x200 /* Start Bit Error Mask */ +#define nSTART_BIT_ERR_MASK 0x0 +#define DAT_BLK_END_MASK 0x400 /* Data Block End Mask */ +#define nDAT_BLK_END_MASK 0x0 +#define CMD_ACT_MASK 0x800 /* CMD Active Mask */ +#define nCMD_ACT_MASK 0x0 +#define TX_ACT_MASK 0x1000 /* Transmit Active Mask */ +#define nTX_ACT_MASK 0x0 +#define RX_ACT_MASK 0x2000 /* Receive Active Mask */ +#define nRX_ACT_MASK 0x0 +#define TX_FIFO_STAT_MASK 0x4000 /* Transmit FIFO Status Mask */ +#define nTX_FIFO_STAT_MASK 0x0 +#define RX_FIFO_STAT_MASK 0x8000 /* Receive FIFO Status Mask */ +#define nRX_FIFO_STAT_MASK 0x0 +#define TX_FIFO_FULL_MASK 0x10000 /* Transmit FIFO Full Mask */ +#define nTX_FIFO_FULL_MASK 0x0 +#define RX_FIFO_FULL_MASK 0x20000 /* Receive FIFO Full Mask */ +#define nRX_FIFO_FULL_MASK 0x0 +#define TX_FIFO_ZERO_MASK 0x40000 /* Transmit FIFO Empty Mask */ +#define nTX_FIFO_ZERO_MASK 0x0 +#define RX_DAT_ZERO_MASK 0x80000 /* Receive FIFO Empty Mask */ +#define nRX_DAT_ZERO_MASK 0x0 +#define TX_DAT_RDY_MASK 0x100000 /* Transmit Data Available Mask */ +#define nTX_DAT_RDY_MASK 0x0 +#define RX_FIFO_RDY_MASK 0x200000 /* Receive Data Available Mask */ +#define nRX_FIFO_RDY_MASK 0x0 + +/* Bit masks for SDH_FIFO_CNT */ + +#define FIFO_COUNT 0x7fff /* FIFO Count */ + +/* Bit masks for SDH_E_STATUS */ + +#define SDIO_INT_DET 0x2 /* SDIO Int Detected */ +#define nSDIO_INT_DET 0x0 +#define SD_CARD_DET 0x10 /* SD Card Detect */ +#define nSD_CARD_DET 0x0 + +/* Bit masks for SDH_E_MASK */ + +#define SDIO_MSK 0x2 /* Mask SDIO Int Detected */ +#define nSDIO_MSK 0x0 +#define SCD_MSK 0x40 /* Mask Card Detect */ +#define nSCD_MSK 0x0 + +/* Bit masks for SDH_CFG */ + +#define CLKS_EN 0x1 /* Clocks Enable */ +#define nCLKS_EN 0x0 +#define SD4E 0x4 /* SDIO 4-Bit Enable */ +#define nSD4E 0x0 +#define MWE 0x8 /* Moving Window Enable */ +#define nMWE 0x0 +#define SD_RST 0x10 /* SDMMC Reset */ +#define nSD_RST 0x0 +#define PUP_SDDAT 0x20 /* Pull-up SD_DAT */ +#define nPUP_SDDAT 0x0 +#define PUP_SDDAT3 0x40 /* Pull-up SD_DAT3 */ +#define nPUP_SDDAT3 0x0 +#define PD_SDDAT3 0x80 /* Pull-down SD_DAT3 */ +#define nPD_SDDAT3 0x0 + +/* Bit masks for SDH_RD_WAIT_EN */ + +#define RWR 0x1 /* Read Wait Request */ +#define nRWR 0x0 + +/* Bit masks for ATAPI_CONTROL */ + +#define PIO_START 0x1 /* Start PIO/Reg Op */ +#define nPIO_START 0x0 +#define MULTI_START 0x2 /* Start Multi-DMA Op */ +#define nMULTI_START 0x0 +#define ULTRA_START 0x4 /* Start Ultra-DMA Op */ +#define nULTRA_START 0x0 +#define XFER_DIR 0x8 /* Transfer Direction */ +#define nXFER_DIR 0x0 +#define IORDY_EN 0x10 /* IORDY Enable */ +#define nIORDY_EN 0x0 +#define FIFO_FLUSH 0x20 /* Flush FIFOs */ +#define nFIFO_FLUSH 0x0 +#define SOFT_RST 0x40 /* Soft Reset */ +#define nSOFT_RST 0x0 +#define DEV_RST 0x80 /* Device Reset */ +#define nDEV_RST 0x0 +#define TFRCNT_RST 0x100 /* Trans Count Reset */ +#define nTFRCNT_RST 0x0 +#define END_ON_TERM 0x200 /* End/Terminate Select */ +#define nEND_ON_TERM 0x0 +#define PIO_USE_DMA 0x400 /* PIO-DMA Enable */ +#define nPIO_USE_DMA 0x0 +#define UDMAIN_FIFO_THRS 0xf000 /* Ultra DMA-IN FIFO Threshold */ + +/* Bit masks for ATAPI_STATUS */ + +#define PIO_XFER_ON 0x1 /* PIO transfer in progress */ +#define nPIO_XFER_ON 0x0 +#define MULTI_XFER_ON 0x2 /* Multi-word DMA transfer in progress */ +#define nMULTI_XFER_ON 0x0 +#define ULTRA_XFER_ON 0x4 /* Ultra DMA transfer in progress */ +#define nULTRA_XFER_ON 0x0 +#define ULTRA_IN_FL 0xf0 /* Ultra DMA Input FIFO Level */ + +/* Bit masks for ATAPI_DEV_ADDR */ + +#define DEV_ADDR 0x1f /* Device Address */ + +/* Bit masks for ATAPI_INT_MASK */ + +#define ATAPI_DEV_INT_MASK 0x1 /* Device interrupt mask */ +#define nATAPI_DEV_INT_MASK 0x0 +#define PIO_DONE_MASK 0x2 /* PIO transfer done interrupt mask */ +#define nPIO_DONE_MASK 0x0 +#define MULTI_DONE_MASK 0x4 /* Multi-DMA transfer done interrupt mask */ +#define nMULTI_DONE_MASK 0x0 +#define UDMAIN_DONE_MASK 0x8 /* Ultra-DMA in transfer done interrupt mask */ +#define nUDMAIN_DONE_MASK 0x0 +#define UDMAOUT_DONE_MASK 0x10 /* Ultra-DMA out transfer done interrupt mask */ +#define nUDMAOUT_DONE_MASK 0x0 +#define HOST_TERM_XFER_MASK 0x20 /* Host terminate current transfer interrupt mask */ +#define nHOST_TERM_XFER_MASK 0x0 +#define MULTI_TERM_MASK 0x40 /* Device terminate Multi-DMA transfer interrupt mask */ +#define nMULTI_TERM_MASK 0x0 +#define UDMAIN_TERM_MASK 0x80 /* Device terminate Ultra-DMA-in transfer interrupt mask */ +#define nUDMAIN_TERM_MASK 0x0 +#define UDMAOUT_TERM_MASK 0x100 /* Device terminate Ultra-DMA-out transfer interrupt mask */ +#define nUDMAOUT_TERM_MASK 0x0 + +/* Bit masks for ATAPI_INT_STATUS */ + +#define ATAPI_DEV_INT 0x1 /* Device interrupt status */ +#define nATAPI_DEV_INT 0x0 +#define PIO_DONE_INT 0x2 /* PIO transfer done interrupt status */ +#define nPIO_DONE_INT 0x0 +#define MULTI_DONE_INT 0x4 /* Multi-DMA transfer done interrupt status */ +#define nMULTI_DONE_INT 0x0 +#define UDMAIN_DONE_INT 0x8 /* Ultra-DMA in transfer done interrupt status */ +#define nUDMAIN_DONE_INT 0x0 +#define UDMAOUT_DONE_INT 0x10 /* Ultra-DMA out transfer done interrupt status */ +#define nUDMAOUT_DONE_INT 0x0 +#define HOST_TERM_XFER_INT 0x20 /* Host terminate current transfer interrupt status */ +#define nHOST_TERM_XFER_INT 0x0 +#define MULTI_TERM_INT 0x40 /* Device terminate Multi-DMA transfer interrupt status */ +#define nMULTI_TERM_INT 0x0 +#define UDMAIN_TERM_INT 0x80 /* Device terminate Ultra-DMA-in transfer interrupt status */ +#define nUDMAIN_TERM_INT 0x0 +#define UDMAOUT_TERM_INT 0x100 /* Device terminate Ultra-DMA-out transfer interrupt status */ +#define nUDMAOUT_TERM_INT 0x0 + +/* Bit masks for ATAPI_LINE_STATUS */ + +#define ATAPI_INTR 0x1 /* Device interrupt to host line status */ +#define nATAPI_INTR 0x0 +#define ATAPI_DASP 0x2 /* Device dasp to host line status */ +#define nATAPI_DASP 0x0 +#define ATAPI_CS0N 0x4 /* ATAPI chip select 0 line status */ +#define nATAPI_CS0N 0x0 +#define ATAPI_CS1N 0x8 /* ATAPI chip select 1 line status */ +#define nATAPI_CS1N 0x0 +#define ATAPI_ADDR 0x70 /* ATAPI address line status */ +#define ATAPI_DMAREQ 0x80 /* ATAPI DMA request line status */ +#define nATAPI_DMAREQ 0x0 +#define ATAPI_DMAACKN 0x100 /* ATAPI DMA acknowledge line status */ +#define nATAPI_DMAACKN 0x0 +#define ATAPI_DIOWN 0x200 /* ATAPI write line status */ +#define nATAPI_DIOWN 0x0 +#define ATAPI_DIORN 0x400 /* ATAPI read line status */ +#define nATAPI_DIORN 0x0 +#define ATAPI_IORDY 0x800 /* ATAPI IORDY line status */ +#define nATAPI_IORDY 0x0 + +/* Bit masks for ATAPI_SM_STATE */ + +#define PIO_CSTATE 0xf /* PIO mode state machine current state */ +#define DMA_CSTATE 0xf0 /* DMA mode state machine current state */ +#define UDMAIN_CSTATE 0xf00 /* Ultra DMA-In mode state machine current state */ +#define UDMAOUT_CSTATE 0xf000 /* ATAPI IORDY line status */ + +/* Bit masks for ATAPI_TERMINATE */ + +#define ATAPI_HOST_TERM 0x1 /* Host terminationation */ +#define nATAPI_HOST_TERM 0x0 + +/* Bit masks for ATAPI_REG_TIM_0 */ + +#define T2_REG 0xff /* End of cycle time for register access transfers */ +#define TEOC_REG 0xff00 /* Selects DIOR/DIOW pulsewidth */ + +/* Bit masks for ATAPI_PIO_TIM_0 */ + +#define T1_REG 0xf /* Time from address valid to DIOR/DIOW */ +#define T2_REG_PIO 0xff0 /* DIOR/DIOW pulsewidth */ +#define T4_REG 0xf000 /* DIOW data hold */ + +/* Bit masks for ATAPI_PIO_TIM_1 */ + +#define TEOC_REG_PIO 0xff /* End of cycle time for PIO access transfers. */ + +/* Bit masks for ATAPI_MULTI_TIM_0 */ + +#define TD 0xff /* DIOR/DIOW asserted pulsewidth */ +#define TM 0xff00 /* Time from address valid to DIOR/DIOW */ + +/* Bit masks for ATAPI_MULTI_TIM_1 */ + +#define TKW 0xff /* Selects DIOW negated pulsewidth */ +#define TKR 0xff00 /* Selects DIOR negated pulsewidth */ + +/* Bit masks for ATAPI_MULTI_TIM_2 */ + +#define TH 0xff /* Selects DIOW data hold */ +#define TEOC 0xff00 /* Selects end of cycle for DMA */ + +/* Bit masks for ATAPI_ULTRA_TIM_0 */ + +#define TACK 0xff /* Selects setup and hold times for TACK */ +#define TENV 0xff00 /* Selects envelope time */ + +/* Bit masks for ATAPI_ULTRA_TIM_1 */ + +#define TDVS 0xff /* Selects data valid setup time */ +#define TCYC_TDVS 0xff00 /* Selects cycle time - TDVS time */ + +/* Bit masks for ATAPI_ULTRA_TIM_2 */ + +#define TSS 0xff /* Selects time from STROBE edge to negation of DMARQ or assertion of STOP */ +#define TMLI 0xff00 /* Selects interlock time */ + +/* Bit masks for ATAPI_ULTRA_TIM_3 */ + +#define TZAH 0xff /* Selects minimum delay required for output */ +#define READY_PAUSE 0xff00 /* Selects ready to pause */ + +/* Bit masks for TIMER_ENABLE1 */ + +#define TIMEN8 0x1 /* Timer 8 Enable */ +#define nTIMEN8 0x0 +#define TIMEN9 0x2 /* Timer 9 Enable */ +#define nTIMEN9 0x0 +#define TIMEN10 0x4 /* Timer 10 Enable */ +#define nTIMEN10 0x0 + +/* Bit masks for TIMER_DISABLE1 */ + +#define TIMDIS8 0x1 /* Timer 8 Disable */ +#define nTIMDIS8 0x0 +#define TIMDIS9 0x2 /* Timer 9 Disable */ +#define nTIMDIS9 0x0 +#define TIMDIS10 0x4 /* Timer 10 Disable */ +#define nTIMDIS10 0x0 + +/* Bit masks for TIMER_STATUS1 */ + +#define TIMIL8 0x1 /* Timer 8 Interrupt */ +#define nTIMIL8 0x0 +#define TIMIL9 0x2 /* Timer 9 Interrupt */ +#define nTIMIL9 0x0 +#define TIMIL10 0x4 /* Timer 10 Interrupt */ +#define nTIMIL10 0x0 +#define TOVF_ERR8 0x10 /* Timer 8 Counter Overflow */ +#define nTOVF_ERR8 0x0 +#define TOVF_ERR9 0x20 /* Timer 9 Counter Overflow */ +#define nTOVF_ERR9 0x0 +#define TOVF_ERR10 0x40 /* Timer 10 Counter Overflow */ +#define nTOVF_ERR10 0x0 +#define TRUN8 0x1000 /* Timer 8 Slave Enable Status */ +#define nTRUN8 0x0 +#define TRUN9 0x2000 /* Timer 9 Slave Enable Status */ +#define nTRUN9 0x0 +#define TRUN10 0x4000 /* Timer 10 Slave Enable Status */ +#define nTRUN10 0x0 + +/* Bit masks for EPPI0 are obtained from common base header for EPPIx (EPPI1 and EPPI2) */ + +/* Bit masks for USB_FADDR */ + +#define FUNCTION_ADDRESS 0x7f /* Function address */ + +/* Bit masks for USB_POWER */ + +#define ENABLE_SUSPENDM 0x1 /* enable SuspendM output */ +#define nENABLE_SUSPENDM 0x0 +#define SUSPEND_MODE 0x2 /* Suspend Mode indicator */ +#define nSUSPEND_MODE 0x0 +#define RESUME_MODE 0x4 /* DMA Mode */ +#define nRESUME_MODE 0x0 +#define RESET 0x8 /* Reset indicator */ +#define nRESET 0x0 +#define HS_MODE 0x10 /* High Speed mode indicator */ +#define nHS_MODE 0x0 +#define HS_ENABLE 0x20 /* high Speed Enable */ +#define nHS_ENABLE 0x0 +#define SOFT_CONN 0x40 /* Soft connect */ +#define nSOFT_CONN 0x0 +#define ISO_UPDATE 0x80 /* Isochronous update */ +#define nISO_UPDATE 0x0 + +/* Bit masks for USB_INTRTX */ + +#define EP0_TX 0x1 /* Tx Endpoint 0 interrupt */ +#define nEP0_TX 0x0 +#define EP1_TX 0x2 /* Tx Endpoint 1 interrupt */ +#define nEP1_TX 0x0 +#define EP2_TX 0x4 /* Tx Endpoint 2 interrupt */ +#define nEP2_TX 0x0 +#define EP3_TX 0x8 /* Tx Endpoint 3 interrupt */ +#define nEP3_TX 0x0 +#define EP4_TX 0x10 /* Tx Endpoint 4 interrupt */ +#define nEP4_TX 0x0 +#define EP5_TX 0x20 /* Tx Endpoint 5 interrupt */ +#define nEP5_TX 0x0 +#define EP6_TX 0x40 /* Tx Endpoint 6 interrupt */ +#define nEP6_TX 0x0 +#define EP7_TX 0x80 /* Tx Endpoint 7 interrupt */ +#define nEP7_TX 0x0 + +/* Bit masks for USB_INTRRX */ + +#define EP1_RX 0x2 /* Rx Endpoint 1 interrupt */ +#define nEP1_RX 0x0 +#define EP2_RX 0x4 /* Rx Endpoint 2 interrupt */ +#define nEP2_RX 0x0 +#define EP3_RX 0x8 /* Rx Endpoint 3 interrupt */ +#define nEP3_RX 0x0 +#define EP4_RX 0x10 /* Rx Endpoint 4 interrupt */ +#define nEP4_RX 0x0 +#define EP5_RX 0x20 /* Rx Endpoint 5 interrupt */ +#define nEP5_RX 0x0 +#define EP6_RX 0x40 /* Rx Endpoint 6 interrupt */ +#define nEP6_RX 0x0 +#define EP7_RX 0x80 /* Rx Endpoint 7 interrupt */ +#define nEP7_RX 0x0 + +/* Bit masks for USB_INTRTXE */ + +#define EP0_TX_E 0x1 /* Endpoint 0 interrupt Enable */ +#define nEP0_TX_E 0x0 +#define EP1_TX_E 0x2 /* Tx Endpoint 1 interrupt Enable */ +#define nEP1_TX_E 0x0 +#define EP2_TX_E 0x4 /* Tx Endpoint 2 interrupt Enable */ +#define nEP2_TX_E 0x0 +#define EP3_TX_E 0x8 /* Tx Endpoint 3 interrupt Enable */ +#define nEP3_TX_E 0x0 +#define EP4_TX_E 0x10 /* Tx Endpoint 4 interrupt Enable */ +#define nEP4_TX_E 0x0 +#define EP5_TX_E 0x20 /* Tx Endpoint 5 interrupt Enable */ +#define nEP5_TX_E 0x0 +#define EP6_TX_E 0x40 /* Tx Endpoint 6 interrupt Enable */ +#define nEP6_TX_E 0x0 +#define EP7_TX_E 0x80 /* Tx Endpoint 7 interrupt Enable */ +#define nEP7_TX_E 0x0 + +/* Bit masks for USB_INTRRXE */ + +#define EP1_RX_E 0x2 /* Rx Endpoint 1 interrupt Enable */ +#define nEP1_RX_E 0x0 +#define EP2_RX_E 0x4 /* Rx Endpoint 2 interrupt Enable */ +#define nEP2_RX_E 0x0 +#define EP3_RX_E 0x8 /* Rx Endpoint 3 interrupt Enable */ +#define nEP3_RX_E 0x0 +#define EP4_RX_E 0x10 /* Rx Endpoint 4 interrupt Enable */ +#define nEP4_RX_E 0x0 +#define EP5_RX_E 0x20 /* Rx Endpoint 5 interrupt Enable */ +#define nEP5_RX_E 0x0 +#define EP6_RX_E 0x40 /* Rx Endpoint 6 interrupt Enable */ +#define nEP6_RX_E 0x0 +#define EP7_RX_E 0x80 /* Rx Endpoint 7 interrupt Enable */ +#define nEP7_RX_E 0x0 + +/* Bit masks for USB_INTRUSB */ + +#define SUSPEND_B 0x1 /* Suspend indicator */ +#define nSUSPEND_B 0x0 +#define RESUME_B 0x2 /* Resume indicator */ +#define nRESUME_B 0x0 +#define RESET_OR_BABLE_B 0x4 /* Reset/babble indicator */ +#define nRESET_OR_BABLE_B 0x0 +#define SOF_B 0x8 /* Start of frame */ +#define nSOF_B 0x0 +#define CONN_B 0x10 /* Connection indicator */ +#define nCONN_B 0x0 +#define DISCON_B 0x20 /* Disconnect indicator */ +#define nDISCON_B 0x0 +#define SESSION_REQ_B 0x40 /* Session Request */ +#define nSESSION_REQ_B 0x0 +#define VBUS_ERROR_B 0x80 /* Vbus threshold indicator */ +#define nVBUS_ERROR_B 0x0 + +/* Bit masks for USB_INTRUSBE */ + +#define SUSPEND_BE 0x1 /* Suspend indicator int enable */ +#define nSUSPEND_BE 0x0 +#define RESUME_BE 0x2 /* Resume indicator int enable */ +#define nRESUME_BE 0x0 +#define RESET_OR_BABLE_BE 0x4 /* Reset/babble indicator int enable */ +#define nRESET_OR_BABLE_BE 0x0 +#define SOF_BE 0x8 /* Start of frame int enable */ +#define nSOF_BE 0x0 +#define CONN_BE 0x10 /* Connection indicator int enable */ +#define nCONN_BE 0x0 +#define DISCON_BE 0x20 /* Disconnect indicator int enable */ +#define nDISCON_BE 0x0 +#define SESSION_REQ_BE 0x40 /* Session Request int enable */ +#define nSESSION_REQ_BE 0x0 +#define VBUS_ERROR_BE 0x80 /* Vbus threshold indicator int enable */ +#define nVBUS_ERROR_BE 0x0 + +/* Bit masks for USB_FRAME */ + +#define FRAME_NUMBER 0x7ff /* Frame number */ + +/* Bit masks for USB_INDEX */ + +#define SELECTED_ENDPOINT 0xf /* selected endpoint */ + +/* Bit masks for USB_GLOBAL_CTL */ + +#define GLOBAL_ENA 0x1 /* enables USB module */ +#define nGLOBAL_ENA 0x0 +#define EP1_TX_ENA 0x2 /* Transmit endpoint 1 enable */ +#define nEP1_TX_ENA 0x0 +#define EP2_TX_ENA 0x4 /* Transmit endpoint 2 enable */ +#define nEP2_TX_ENA 0x0 +#define EP3_TX_ENA 0x8 /* Transmit endpoint 3 enable */ +#define nEP3_TX_ENA 0x0 +#define EP4_TX_ENA 0x10 /* Transmit endpoint 4 enable */ +#define nEP4_TX_ENA 0x0 +#define EP5_TX_ENA 0x20 /* Transmit endpoint 5 enable */ +#define nEP5_TX_ENA 0x0 +#define EP6_TX_ENA 0x40 /* Transmit endpoint 6 enable */ +#define nEP6_TX_ENA 0x0 +#define EP7_TX_ENA 0x80 /* Transmit endpoint 7 enable */ +#define nEP7_TX_ENA 0x0 +#define EP1_RX_ENA 0x100 /* Receive endpoint 1 enable */ +#define nEP1_RX_ENA 0x0 +#define EP2_RX_ENA 0x200 /* Receive endpoint 2 enable */ +#define nEP2_RX_ENA 0x0 +#define EP3_RX_ENA 0x400 /* Receive endpoint 3 enable */ +#define nEP3_RX_ENA 0x0 +#define EP4_RX_ENA 0x800 /* Receive endpoint 4 enable */ +#define nEP4_RX_ENA 0x0 +#define EP5_RX_ENA 0x1000 /* Receive endpoint 5 enable */ +#define nEP5_RX_ENA 0x0 +#define EP6_RX_ENA 0x2000 /* Receive endpoint 6 enable */ +#define nEP6_RX_ENA 0x0 +#define EP7_RX_ENA 0x4000 /* Receive endpoint 7 enable */ +#define nEP7_RX_ENA 0x0 + +/* Bit masks for USB_OTG_DEV_CTL */ + +#define SESSION 0x1 /* session indicator */ +#define nSESSION 0x0 +#define HOST_REQ 0x2 /* Host negotiation request */ +#define nHOST_REQ 0x0 +#define HOST_MODE 0x4 /* indicates USBDRC is a host */ +#define nHOST_MODE 0x0 +#define VBUS0 0x8 /* Vbus level indicator[0] */ +#define nVBUS0 0x0 +#define VBUS1 0x10 /* Vbus level indicator[1] */ +#define nVBUS1 0x0 +#define LSDEV 0x20 /* Low-speed indicator */ +#define nLSDEV 0x0 +#define FSDEV 0x40 /* Full or High-speed indicator */ +#define nFSDEV 0x0 +#define B_DEVICE 0x80 /* A' or 'B' device indicator */ +#define nB_DEVICE 0x0 + +/* Bit masks for USB_OTG_VBUS_IRQ */ + +#define DRIVE_VBUS_ON 0x1 /* indicator to drive VBUS control circuit */ +#define nDRIVE_VBUS_ON 0x0 +#define DRIVE_VBUS_OFF 0x2 /* indicator to shut off charge pump */ +#define nDRIVE_VBUS_OFF 0x0 +#define CHRG_VBUS_START 0x4 /* indicator for external circuit to start charging VBUS */ +#define nCHRG_VBUS_START 0x0 +#define CHRG_VBUS_END 0x8 /* indicator for external circuit to end charging VBUS */ +#define nCHRG_VBUS_END 0x0 +#define DISCHRG_VBUS_START 0x10 /* indicator to start discharging VBUS */ +#define nDISCHRG_VBUS_START 0x0 +#define DISCHRG_VBUS_END 0x20 /* indicator to stop discharging VBUS */ +#define nDISCHRG_VBUS_END 0x0 + +/* Bit masks for USB_OTG_VBUS_MASK */ + +#define DRIVE_VBUS_ON_ENA 0x1 /* enable DRIVE_VBUS_ON interrupt */ +#define nDRIVE_VBUS_ON_ENA 0x0 +#define DRIVE_VBUS_OFF_ENA 0x2 /* enable DRIVE_VBUS_OFF interrupt */ +#define nDRIVE_VBUS_OFF_ENA 0x0 +#define CHRG_VBUS_START_ENA 0x4 /* enable CHRG_VBUS_START interrupt */ +#define nCHRG_VBUS_START_ENA 0x0 +#define CHRG_VBUS_END_ENA 0x8 /* enable CHRG_VBUS_END interrupt */ +#define nCHRG_VBUS_END_ENA 0x0 +#define DISCHRG_VBUS_START_ENA 0x10 /* enable DISCHRG_VBUS_START interrupt */ +#define nDISCHRG_VBUS_START_ENA 0x0 +#define DISCHRG_VBUS_END_ENA 0x20 /* enable DISCHRG_VBUS_END interrupt */ +#define nDISCHRG_VBUS_END_ENA 0x0 + +/* Bit masks for USB_CSR0 */ + +#define RXPKTRDY 0x1 /* data packet receive indicator */ +#define nRXPKTRDY 0x0 +#define TXPKTRDY 0x2 /* data packet in FIFO indicator */ +#define nTXPKTRDY 0x0 +#define STALL_SENT 0x4 /* STALL handshake sent */ +#define nSTALL_SENT 0x0 +#define DATAEND 0x8 /* Data end indicator */ +#define nDATAEND 0x0 +#define SETUPEND 0x10 /* Setup end */ +#define nSETUPEND 0x0 +#define SENDSTALL 0x20 /* Send STALL handshake */ +#define nSENDSTALL 0x0 +#define SERVICED_RXPKTRDY 0x40 /* used to clear the RxPktRdy bit */ +#define nSERVICED_RXPKTRDY 0x0 +#define SERVICED_SETUPEND 0x80 /* used to clear the SetupEnd bit */ +#define nSERVICED_SETUPEND 0x0 +#define FLUSHFIFO 0x100 /* flush endpoint FIFO */ +#define nFLUSHFIFO 0x0 +#define STALL_RECEIVED_H 0x4 /* STALL handshake received host mode */ +#define nSTALL_RECEIVED_H 0x0 +#define SETUPPKT_H 0x8 /* send Setup token host mode */ +#define nSETUPPKT_H 0x0 +#define ERROR_H 0x10 /* timeout error indicator host mode */ +#define nERROR_H 0x0 +#define REQPKT_H 0x20 /* Request an IN transaction host mode */ +#define nREQPKT_H 0x0 +#define STATUSPKT_H 0x40 /* Status stage transaction host mode */ +#define nSTATUSPKT_H 0x0 +#define NAK_TIMEOUT_H 0x80 /* EP0 halted after a NAK host mode */ +#define nNAK_TIMEOUT_H 0x0 + +/* Bit masks for USB_COUNT0 */ + +#define EP0_RX_COUNT 0x7f /* number of received bytes in EP0 FIFO */ + +/* Bit masks for USB_NAKLIMIT0 */ + +#define EP0_NAK_LIMIT 0x1f /* number of frames/micro frames after which EP0 timeouts */ + +/* Bit masks for USB_TX_MAX_PACKET */ + +#define MAX_PACKET_SIZE_T 0x7ff /* maximum data pay load in a frame */ + +/* Bit masks for USB_RX_MAX_PACKET */ + +#define MAX_PACKET_SIZE_R 0x7ff /* maximum data pay load in a frame */ + +/* Bit masks for USB_TXCSR */ + +#define TXPKTRDY_T 0x1 /* data packet in FIFO indicator */ +#define nTXPKTRDY_T 0x0 +#define FIFO_NOT_EMPTY_T 0x2 /* FIFO not empty */ +#define nFIFO_NOT_EMPTY_T 0x0 +#define UNDERRUN_T 0x4 /* TxPktRdy not set for an IN token */ +#define nUNDERRUN_T 0x0 +#define FLUSHFIFO_T 0x8 /* flush endpoint FIFO */ +#define nFLUSHFIFO_T 0x0 +#define STALL_SEND_T 0x10 /* issue a Stall handshake */ +#define nSTALL_SEND_T 0x0 +#define STALL_SENT_T 0x20 /* Stall handshake transmitted */ +#define nSTALL_SENT_T 0x0 +#define CLEAR_DATATOGGLE_T 0x40 /* clear endpoint data toggle */ +#define nCLEAR_DATATOGGLE_T 0x0 +#define INCOMPTX_T 0x80 /* indicates that a large packet is split */ +#define nINCOMPTX_T 0x0 +#define DMAREQMODE_T 0x400 /* DMA mode (0 or 1) selection */ +#define nDMAREQMODE_T 0x0 +#define FORCE_DATATOGGLE_T 0x800 /* Force data toggle */ +#define nFORCE_DATATOGGLE_T 0x0 +#define DMAREQ_ENA_T 0x1000 /* Enable DMA request for Tx EP */ +#define nDMAREQ_ENA_T 0x0 +#define ISO_T 0x4000 /* enable Isochronous transfers */ +#define nISO_T 0x0 +#define AUTOSET_T 0x8000 /* allows TxPktRdy to be set automatically */ +#define nAUTOSET_T 0x0 +#define ERROR_TH 0x4 /* error condition host mode */ +#define nERROR_TH 0x0 +#define STALL_RECEIVED_TH 0x20 /* Stall handshake received host mode */ +#define nSTALL_RECEIVED_TH 0x0 +#define NAK_TIMEOUT_TH 0x80 /* NAK timeout host mode */ +#define nNAK_TIMEOUT_TH 0x0 + +/* Bit masks for USB_TXCOUNT */ + +#define TX_COUNT 0x1fff /* Number of bytes to be written to the selected endpoint Tx FIFO */ + +/* Bit masks for USB_RXCSR */ + +#define RXPKTRDY_R 0x1 /* data packet in FIFO indicator */ +#define nRXPKTRDY_R 0x0 +#define FIFO_FULL_R 0x2 /* FIFO not empty */ +#define nFIFO_FULL_R 0x0 +#define OVERRUN_R 0x4 /* TxPktRdy not set for an IN token */ +#define nOVERRUN_R 0x0 +#define DATAERROR_R 0x8 /* Out packet cannot be loaded into Rx FIFO */ +#define nDATAERROR_R 0x0 +#define FLUSHFIFO_R 0x10 /* flush endpoint FIFO */ +#define nFLUSHFIFO_R 0x0 +#define STALL_SEND_R 0x20 /* issue a Stall handshake */ +#define nSTALL_SEND_R 0x0 +#define STALL_SENT_R 0x40 /* Stall handshake transmitted */ +#define nSTALL_SENT_R 0x0 +#define CLEAR_DATATOGGLE_R 0x80 /* clear endpoint data toggle */ +#define nCLEAR_DATATOGGLE_R 0x0 +#define INCOMPRX_R 0x100 /* indicates that a large packet is split */ +#define nINCOMPRX_R 0x0 +#define DMAREQMODE_R 0x800 /* DMA mode (0 or 1) selection */ +#define nDMAREQMODE_R 0x0 +#define DISNYET_R 0x1000 /* disable Nyet handshakes */ +#define nDISNYET_R 0x0 +#define DMAREQ_ENA_R 0x2000 /* Enable DMA request for Tx EP */ +#define nDMAREQ_ENA_R 0x0 +#define ISO_R 0x4000 /* enable Isochronous transfers */ +#define nISO_R 0x0 +#define AUTOCLEAR_R 0x8000 /* allows TxPktRdy to be set automatically */ +#define nAUTOCLEAR_R 0x0 +#define ERROR_RH 0x4 /* TxPktRdy not set for an IN token host mode */ +#define nERROR_RH 0x0 +#define REQPKT_RH 0x20 /* request an IN transaction host mode */ +#define nREQPKT_RH 0x0 +#define STALL_RECEIVED_RH 0x40 /* Stall handshake received host mode */ +#define nSTALL_RECEIVED_RH 0x0 +#define INCOMPRX_RH 0x100 /* indicates that a large packet is split host mode */ +#define nINCOMPRX_RH 0x0 +#define DMAREQMODE_RH 0x800 /* DMA mode (0 or 1) selection host mode */ +#define nDMAREQMODE_RH 0x0 +#define AUTOREQ_RH 0x4000 /* sets ReqPkt automatically host mode */ +#define nAUTOREQ_RH 0x0 + +/* Bit masks for USB_RXCOUNT */ + +#define RX_COUNT 0x1fff /* Number of received bytes in the packet in the Rx FIFO */ + +/* Bit masks for USB_TXTYPE */ + +#define TARGET_EP_NO_T 0xf /* EP number */ +#define PROTOCOL_T 0xc /* transfer type */ + +/* Bit masks for USB_TXINTERVAL */ + +#define TX_POLL_INTERVAL 0xff /* polling interval for selected Tx EP */ + +/* Bit masks for USB_RXTYPE */ + +#define TARGET_EP_NO_R 0xf /* EP number */ +#define PROTOCOL_R 0xc /* transfer type */ + +/* Bit masks for USB_RXINTERVAL */ + +#define RX_POLL_INTERVAL 0xff /* polling interval for selected Rx EP */ + +/* Bit masks for USB_DMA_INTERRUPT */ + +#define DMA0_INT 0x1 /* DMA0 pending interrupt */ +#define nDMA0_INT 0x0 +#define DMA1_INT 0x2 /* DMA1 pending interrupt */ +#define nDMA1_INT 0x0 +#define DMA2_INT 0x4 /* DMA2 pending interrupt */ +#define nDMA2_INT 0x0 +#define DMA3_INT 0x8 /* DMA3 pending interrupt */ +#define nDMA3_INT 0x0 +#define DMA4_INT 0x10 /* DMA4 pending interrupt */ +#define nDMA4_INT 0x0 +#define DMA5_INT 0x20 /* DMA5 pending interrupt */ +#define nDMA5_INT 0x0 +#define DMA6_INT 0x40 /* DMA6 pending interrupt */ +#define nDMA6_INT 0x0 +#define DMA7_INT 0x80 /* DMA7 pending interrupt */ +#define nDMA7_INT 0x0 + +/* Bit masks for USB_DMAxCONTROL */ + +#define DMA_ENA 0x1 /* DMA enable */ +#define nDMA_ENA 0x0 +#define DIRECTION 0x2 /* direction of DMA transfer */ +#define nDIRECTION 0x0 +#define MODE 0x4 /* DMA Bus error */ +#define nMODE 0x0 +#define INT_ENA 0x8 /* Interrupt enable */ +#define nINT_ENA 0x0 +#define EPNUM 0xf0 /* EP number */ +#define BUSERROR 0x100 /* DMA Bus error */ +#define nBUSERROR 0x0 + +/* Bit masks for USB_DMAxADDRHIGH */ + +#define DMA_ADDR_HIGH 0xffff /* Upper 16-bits of memory source/destination address for the DMA master channel */ + +/* Bit masks for USB_DMAxADDRLOW */ + +#define DMA_ADDR_LOW 0xffff /* Lower 16-bits of memory source/destination address for the DMA master channel */ + +/* Bit masks for USB_DMAxCOUNTHIGH */ + +#define DMA_COUNT_HIGH 0xffff /* Upper 16-bits of byte count of DMA transfer for DMA master channel */ + +/* Bit masks for USB_DMAxCOUNTLOW */ + +#define DMA_COUNT_LOW 0xffff /* Lower 16-bits of byte count of DMA transfer for DMA master channel */ + +/* Bit masks for HMDMAx_CONTROL */ + +#define HMDMAEN 0x1 /* Handshake MDMA Enable */ +#define nHMDMAEN 0x0 +#define REP 0x2 /* Handshake MDMA Request Polarity */ +#define nREP 0x0 +#define UTE 0x8 /* Urgency Threshold Enable */ +#define nUTE 0x0 +#define OIE 0x10 /* Overflow Interrupt Enable */ +#define nOIE 0x0 +#define BDIE 0x20 /* Block Done Interrupt Enable */ +#define nBDIE 0x0 +#define MBDI 0x40 /* Mask Block Done Interrupt */ +#define nMBDI 0x0 +#define DRQ 0x300 /* Handshake MDMA Request Type */ +#define RBC 0x1000 /* Force Reload of BCOUNT */ +#define nRBC 0x0 +#define PS 0x2000 /* Pin Status */ +#define nPS 0x0 +#define OI 0x4000 /* Overflow Interrupt Generated */ +#define nOI 0x0 +#define BDI 0x8000 /* Block Done Interrupt Generated */ +#define nBDI 0x0 + +/* ******************************************* */ +/* MULTI BIT MACRO ENUMERATIONS */ +/* ******************************************* */ + + +#endif /* _DEF_BF548_H */ diff --git a/include/asm-blackfin/mach-bf548/defBF549.h b/include/asm-blackfin/mach-bf548/defBF549.h new file mode 100644 index 00000000000000..b1cc1c073b4115 --- /dev/null +++ b/include/asm-blackfin/mach-bf548/defBF549.h @@ -0,0 +1,3472 @@ +/* + * File: include/asm-blackfin/mach-bf548/defBF549.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _DEF_BF549_H +#define _DEF_BF549_H + +/* Include all Core registers and bit definitions */ +#include <asm/mach-common/def_LPBlackfin.h> + + +/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF549 */ + +/* Include defBF54x_base.h for the set of #defines that are common to all ADSP-BF54x processors */ +#include "defBF54x_base.h" + +/* The following are the #defines needed by ADSP-BF549 that are not in the common header */ + +/* Timer Registers */ + +#define TIMER8_CONFIG 0xffc00600 /* Timer 8 Configuration Register */ +#define TIMER8_COUNTER 0xffc00604 /* Timer 8 Counter Register */ +#define TIMER8_PERIOD 0xffc00608 /* Timer 8 Period Register */ +#define TIMER8_WIDTH 0xffc0060c /* Timer 8 Width Register */ +#define TIMER9_CONFIG 0xffc00610 /* Timer 9 Configuration Register */ +#define TIMER9_COUNTER 0xffc00614 /* Timer 9 Counter Register */ +#define TIMER9_PERIOD 0xffc00618 /* Timer 9 Period Register */ +#define TIMER9_WIDTH 0xffc0061c /* Timer 9 Width Register */ +#define TIMER10_CONFIG 0xffc00620 /* Timer 10 Configuration Register */ +#define TIMER10_COUNTER 0xffc00624 /* Timer 10 Counter Register */ +#define TIMER10_PERIOD 0xffc00628 /* Timer 10 Period Register */ +#define TIMER10_WIDTH 0xffc0062c /* Timer 10 Width Register */ + +/* Timer Group of 3 Registers */ + +#define TIMER_ENABLE1 0xffc00640 /* Timer Group of 3 Enable Register */ +#define TIMER_DISABLE1 0xffc00644 /* Timer Group of 3 Disable Register */ +#define TIMER_STATUS1 0xffc00648 /* Timer Group of 3 Status Register */ + +/* SPORT0 Registers */ + +#define SPORT0_TCR1 0xffc00800 /* SPORT0 Transmit Configuration 1 Register */ +#define SPORT0_TCR2 0xffc00804 /* SPORT0 Transmit Configuration 2 Register */ +#define SPORT0_TCLKDIV 0xffc00808 /* SPORT0 Transmit Serial Clock Divider Register */ +#define SPORT0_TFSDIV 0xffc0080c /* SPORT0 Transmit Frame Sync Divider Register */ +#define SPORT0_TX 0xffc00810 /* SPORT0 Transmit Data Register */ +#define SPORT0_RX 0xffc00818 /* SPORT0 Receive Data Register */ +#define SPORT0_RCR1 0xffc00820 /* SPORT0 Receive Configuration 1 Register */ +#define SPORT0_RCR2 0xffc00824 /* SPORT0 Receive Configuration 2 Register */ +#define SPORT0_RCLKDIV 0xffc00828 /* SPORT0 Receive Serial Clock Divider Register */ +#define SPORT0_RFSDIV 0xffc0082c /* SPORT0 Receive Frame Sync Divider Register */ +#define SPORT0_STAT 0xffc00830 /* SPORT0 Status Register */ +#define SPORT0_CHNL 0xffc00834 /* SPORT0 Current Channel Register */ +#define SPORT0_MCMC1 0xffc00838 /* SPORT0 Multi channel Configuration Register 1 */ +#define SPORT0_MCMC2 0xffc0083c /* SPORT0 Multi channel Configuration Register 2 */ +#define SPORT0_MTCS0 0xffc00840 /* SPORT0 Multi channel Transmit Select Register 0 */ +#define SPORT0_MTCS1 0xffc00844 /* SPORT0 Multi channel Transmit Select Register 1 */ +#define SPORT0_MTCS2 0xffc00848 /* SPORT0 Multi channel Transmit Select Register 2 */ +#define SPORT0_MTCS3 0xffc0084c /* SPORT0 Multi channel Transmit Select Register 3 */ +#define SPORT0_MRCS0 0xffc00850 /* SPORT0 Multi channel Receive Select Register 0 */ +#define SPORT0_MRCS1 0xffc00854 /* SPORT0 Multi channel Receive Select Register 1 */ +#define SPORT0_MRCS2 0xffc00858 /* SPORT0 Multi channel Receive Select Register 2 */ +#define SPORT0_MRCS3 0xffc0085c /* SPORT0 Multi channel Receive Select Register 3 */ + +/* EPPI0 Registers */ + +#define EPPI0_STATUS 0xffc01000 /* EPPI0 Status Register */ +#define EPPI0_HCOUNT 0xffc01004 /* EPPI0 Horizontal Transfer Count Register */ +#define EPPI0_HDELAY 0xffc01008 /* EPPI0 Horizontal Delay Count Register */ +#define EPPI0_VCOUNT 0xffc0100c /* EPPI0 Vertical Transfer Count Register */ +#define EPPI0_VDELAY 0xffc01010 /* EPPI0 Vertical Delay Count Register */ +#define EPPI0_FRAME 0xffc01014 /* EPPI0 Lines per Frame Register */ +#define EPPI0_LINE 0xffc01018 /* EPPI0 Samples per Line Register */ +#define EPPI0_CLKDIV 0xffc0101c /* EPPI0 Clock Divide Register */ +#define EPPI0_CONTROL 0xffc01020 /* EPPI0 Control Register */ +#define EPPI0_FS1W_HBL 0xffc01024 /* EPPI0 FS1 Width Register / EPPI0 Horizontal Blanking Samples Per Line Register */ +#define EPPI0_FS1P_AVPL 0xffc01028 /* EPPI0 FS1 Period Register / EPPI0 Active Video Samples Per Line Register */ +#define EPPI0_FS2W_LVB 0xffc0102c /* EPPI0 FS2 Width Register / EPPI0 Lines of Vertical Blanking Register */ +#define EPPI0_FS2P_LAVF 0xffc01030 /* EPPI0 FS2 Period Register/ EPPI0 Lines of Active Video Per Field Register */ +#define EPPI0_CLIP 0xffc01034 /* EPPI0 Clipping Register */ + +/* UART2 Registers */ + +#define UART2_DLL 0xffc02100 /* Divisor Latch Low Byte */ +#define UART2_DLH 0xffc02104 /* Divisor Latch High Byte */ +#define UART2_GCTL 0xffc02108 /* Global Control Register */ +#define UART2_LCR 0xffc0210c /* Line Control Register */ +#define UART2_MCR 0xffc02110 /* Modem Control Register */ +#define UART2_LSR 0xffc02114 /* Line Status Register */ +#define UART2_MSR 0xffc02118 /* Modem Status Register */ +#define UART2_SCR 0xffc0211c /* Scratch Register */ +#define UART2_IER_SET 0xffc02120 /* Interrupt Enable Register Set */ +#define UART2_IER_CLEAR 0xffc02124 /* Interrupt Enable Register Clear */ +#define UART2_RBR 0xffc0212c /* Receive Buffer Register */ + +/* Two Wire Interface Registers (TWI1) */ + +#define TWI1_CLKDIV 0xffc02200 /* Clock Divider Register */ +#define TWI1_CONTROL 0xffc02204 /* TWI Control Register */ +#define TWI1_SLAVE_CTRL 0xffc02208 /* TWI Slave Mode Control Register */ +#define TWI1_SLAVE_STAT 0xffc0220c /* TWI Slave Mode Status Register */ +#define TWI1_SLAVE_ADDR 0xffc02210 /* TWI Slave Mode Address Register */ +#define TWI1_MASTER_CTRL 0xffc02214 /* TWI Master Mode Control Register */ +#define TWI1_MASTER_STAT 0xffc02218 /* TWI Master Mode Status Register */ +#define TWI1_MASTER_ADDR 0xffc0221c /* TWI Master Mode Address Register */ +#define TWI1_INT_STAT 0xffc02220 /* TWI Interrupt Status Register */ +#define TWI1_INT_MASK 0xffc02224 /* TWI Interrupt Mask Register */ +#define TWI1_FIFO_CTRL 0xffc02228 /* TWI FIFO Control Register */ +#define TWI1_FIFO_STAT 0xffc0222c /* TWI FIFO Status Register */ +#define TWI1_XMT_DATA8 0xffc02280 /* TWI FIFO Transmit Data Single Byte Register */ +#define TWI1_XMT_DATA16 0xffc02284 /* TWI FIFO Transmit Data Double Byte Register */ +#define TWI1_RCV_DATA8 0xffc02288 /* TWI FIFO Receive Data Single Byte Register */ +#define TWI1_RCV_DATA16 0xffc0228c /* TWI FIFO Receive Data Double Byte Register */ + +/* SPI2 Registers */ + +#define SPI2_CTL 0xffc02400 /* SPI2 Control Register */ +#define SPI2_FLG 0xffc02404 /* SPI2 Flag Register */ +#define SPI2_STAT 0xffc02408 /* SPI2 Status Register */ +#define SPI2_TDBR 0xffc0240c /* SPI2 Transmit Data Buffer Register */ +#define SPI2_RDBR 0xffc02410 /* SPI2 Receive Data Buffer Register */ +#define SPI2_BAUD 0xffc02414 /* SPI2 Baud Rate Register */ +#define SPI2_SHADOW 0xffc02418 /* SPI2 Receive Data Buffer Shadow Register */ + +/* MXVR Registers */ + +#define MXVR_CONFIG 0xffc02700 /* MXVR Configuration Register */ +#define MXVR_STATE_0 0xffc02708 /* MXVR State Register 0 */ +#define MXVR_STATE_1 0xffc0270c /* MXVR State Register 1 */ +#define MXVR_INT_STAT_0 0xffc02710 /* MXVR Interrupt Status Register 0 */ +#define MXVR_INT_STAT_1 0xffc02714 /* MXVR Interrupt Status Register 1 */ +#define MXVR_INT_EN_0 0xffc02718 /* MXVR Interrupt Enable Register 0 */ +#define MXVR_INT_EN_1 0xffc0271c /* MXVR Interrupt Enable Register 1 */ +#define MXVR_POSITION 0xffc02720 /* MXVR Node Position Register */ +#define MXVR_MAX_POSITION 0xffc02724 /* MXVR Maximum Node Position Register */ +#define MXVR_DELAY 0xffc02728 /* MXVR Node Frame Delay Register */ +#define MXVR_MAX_DELAY 0xffc0272c /* MXVR Maximum Node Frame Delay Register */ +#define MXVR_LADDR 0xffc02730 /* MXVR Logical Address Register */ +#define MXVR_GADDR 0xffc02734 /* MXVR Group Address Register */ +#define MXVR_AADDR 0xffc02738 /* MXVR Alternate Address Register */ + +/* MXVR Allocation Table Registers */ + +#define MXVR_ALLOC_0 0xffc0273c /* MXVR Allocation Table Register 0 */ +#define MXVR_ALLOC_1 0xffc02740 /* MXVR Allocation Table Register 1 */ +#define MXVR_ALLOC_2 0xffc02744 /* MXVR Allocation Table Register 2 */ +#define MXVR_ALLOC_3 0xffc02748 /* MXVR Allocation Table Register 3 */ +#define MXVR_ALLOC_4 0xffc0274c /* MXVR Allocation Table Register 4 */ +#define MXVR_ALLOC_5 0xffc02750 /* MXVR Allocation Table Register 5 */ +#define MXVR_ALLOC_6 0xffc02754 /* MXVR Allocation Table Register 6 */ +#define MXVR_ALLOC_7 0xffc02758 /* MXVR Allocation Table Register 7 */ +#define MXVR_ALLOC_8 0xffc0275c /* MXVR Allocation Table Register 8 */ +#define MXVR_ALLOC_9 0xffc02760 /* MXVR Allocation Table Register 9 */ +#define MXVR_ALLOC_10 0xffc02764 /* MXVR Allocation Table Register 10 */ +#define MXVR_ALLOC_11 0xffc02768 /* MXVR Allocation Table Register 11 */ +#define MXVR_ALLOC_12 0xffc0276c /* MXVR Allocation Table Register 12 */ +#define MXVR_ALLOC_13 0xffc02770 /* MXVR Allocation Table Register 13 */ +#define MXVR_ALLOC_14 0xffc02774 /* MXVR Allocation Table Register 14 */ + +/* MXVR Channel Assign Registers */ + +#define MXVR_SYNC_LCHAN_0 0xffc02778 /* MXVR Sync Data Logical Channel Assign Register 0 */ +#define MXVR_SYNC_LCHAN_1 0xffc0277c /* MXVR Sync Data Logical Channel Assign Register 1 */ +#define MXVR_SYNC_LCHAN_2 0xffc02780 /* MXVR Sync Data Logical Channel Assign Register 2 */ +#define MXVR_SYNC_LCHAN_3 0xffc02784 /* MXVR Sync Data Logical Channel Assign Register 3 */ +#define MXVR_SYNC_LCHAN_4 0xffc02788 /* MXVR Sync Data Logical Channel Assign Register 4 */ +#define MXVR_SYNC_LCHAN_5 0xffc0278c /* MXVR Sync Data Logical Channel Assign Register 5 */ +#define MXVR_SYNC_LCHAN_6 0xffc02790 /* MXVR Sync Data Logical Channel Assign Register 6 */ +#define MXVR_SYNC_LCHAN_7 0xffc02794 /* MXVR Sync Data Logical Channel Assign Register 7 */ + +/* MXVR DMA0 Registers */ + +#define MXVR_DMA0_CONFIG 0xffc02798 /* MXVR Sync Data DMA0 Config Register */ +#define MXVR_DMA0_START_ADDR 0xffc0279c /* MXVR Sync Data DMA0 Start Address */ +#define MXVR_DMA0_COUNT 0xffc027a0 /* MXVR Sync Data DMA0 Loop Count Register */ +#define MXVR_DMA0_CURR_ADDR 0xffc027a4 /* MXVR Sync Data DMA0 Current Address */ +#define MXVR_DMA0_CURR_COUNT 0xffc027a8 /* MXVR Sync Data DMA0 Current Loop Count */ + +/* MXVR DMA1 Registers */ + +#define MXVR_DMA1_CONFIG 0xffc027ac /* MXVR Sync Data DMA1 Config Register */ +#define MXVR_DMA1_START_ADDR 0xffc027b0 /* MXVR Sync Data DMA1 Start Address */ +#define MXVR_DMA1_COUNT 0xffc027b4 /* MXVR Sync Data DMA1 Loop Count Register */ +#define MXVR_DMA1_CURR_ADDR 0xffc027b8 /* MXVR Sync Data DMA1 Current Address */ +#define MXVR_DMA1_CURR_COUNT 0xffc027bc /* MXVR Sync Data DMA1 Current Loop Count */ + +/* MXVR DMA2 Registers */ + +#define MXVR_DMA2_CONFIG 0xffc027c0 /* MXVR Sync Data DMA2 Config Register */ +#define MXVR_DMA2_START_ADDR 0xffc027c4 /* MXVR Sync Data DMA2 Start Address */ +#define MXVR_DMA2_COUNT 0xffc027c8 /* MXVR Sync Data DMA2 Loop Count Register */ +#define MXVR_DMA2_CURR_ADDR 0xffc027cc /* MXVR Sync Data DMA2 Current Address */ +#define MXVR_DMA2_CURR_COUNT 0xffc027d0 /* MXVR Sync Data DMA2 Current Loop Count */ + +/* MXVR DMA3 Registers */ + +#define MXVR_DMA3_CONFIG 0xffc027d4 /* MXVR Sync Data DMA3 Config Register */ +#define MXVR_DMA3_START_ADDR 0xffc027d8 /* MXVR Sync Data DMA3 Start Address */ +#define MXVR_DMA3_COUNT 0xffc027dc /* MXVR Sync Data DMA3 Loop Count Register */ +#define MXVR_DMA3_CURR_ADDR 0xffc027e0 /* MXVR Sync Data DMA3 Current Address */ +#define MXVR_DMA3_CURR_COUNT 0xffc027e4 /* MXVR Sync Data DMA3 Current Loop Count */ + +/* MXVR DMA4 Registers */ + +#define MXVR_DMA4_CONFIG 0xffc027e8 /* MXVR Sync Data DMA4 Config Register */ +#define MXVR_DMA4_START_ADDR 0xffc027ec /* MXVR Sync Data DMA4 Start Address */ +#define MXVR_DMA4_COUNT 0xffc027f0 /* MXVR Sync Data DMA4 Loop Count Register */ +#define MXVR_DMA4_CURR_ADDR 0xffc027f4 /* MXVR Sync Data DMA4 Current Address */ +#define MXVR_DMA4_CURR_COUNT 0xffc027f8 /* MXVR Sync Data DMA4 Current Loop Count */ + +/* MXVR DMA5 Registers */ + +#define MXVR_DMA5_CONFIG 0xffc027fc /* MXVR Sync Data DMA5 Config Register */ +#define MXVR_DMA5_START_ADDR 0xffc02800 /* MXVR Sync Data DMA5 Start Address */ +#define MXVR_DMA5_COUNT 0xffc02804 /* MXVR Sync Data DMA5 Loop Count Register */ +#define MXVR_DMA5_CURR_ADDR 0xffc02808 /* MXVR Sync Data DMA5 Current Address */ +#define MXVR_DMA5_CURR_COUNT 0xffc0280c /* MXVR Sync Data DMA5 Current Loop Count */ + +/* MXVR DMA6 Registers */ + +#define MXVR_DMA6_CONFIG 0xffc02810 /* MXVR Sync Data DMA6 Config Register */ +#define MXVR_DMA6_START_ADDR 0xffc02814 /* MXVR Sync Data DMA6 Start Address */ +#define MXVR_DMA6_COUNT 0xffc02818 /* MXVR Sync Data DMA6 Loop Count Register */ +#define MXVR_DMA6_CURR_ADDR 0xffc0281c /* MXVR Sync Data DMA6 Current Address */ +#define MXVR_DMA6_CURR_COUNT 0xffc02820 /* MXVR Sync Data DMA6 Current Loop Count */ + +/* MXVR DMA7 Registers */ + +#define MXVR_DMA7_CONFIG 0xffc02824 /* MXVR Sync Data DMA7 Config Register */ +#define MXVR_DMA7_START_ADDR 0xffc02828 /* MXVR Sync Data DMA7 Start Address */ +#define MXVR_DMA7_COUNT 0xffc0282c /* MXVR Sync Data DMA7 Loop Count Register */ +#define MXVR_DMA7_CURR_ADDR 0xffc02830 /* MXVR Sync Data DMA7 Current Address */ +#define MXVR_DMA7_CURR_COUNT 0xffc02834 /* MXVR Sync Data DMA7 Current Loop Count */ + +/* MXVR Asynch Packet Registers */ + +#define MXVR_AP_CTL 0xffc02838 /* MXVR Async Packet Control Register */ +#define MXVR_APRB_START_ADDR 0xffc0283c /* MXVR Async Packet RX Buffer Start Addr Register */ +#define MXVR_APRB_CURR_ADDR 0xffc02840 /* MXVR Async Packet RX Buffer Current Addr Register */ +#define MXVR_APTB_START_ADDR 0xffc02844 /* MXVR Async Packet TX Buffer Start Addr Register */ +#define MXVR_APTB_CURR_ADDR 0xffc02848 /* MXVR Async Packet TX Buffer Current Addr Register */ + +/* MXVR Control Message Registers */ + +#define MXVR_CM_CTL 0xffc0284c /* MXVR Control Message Control Register */ +#define MXVR_CMRB_START_ADDR 0xffc02850 /* MXVR Control Message RX Buffer Start Addr Register */ +#define MXVR_CMRB_CURR_ADDR 0xffc02854 /* MXVR Control Message RX Buffer Current Address */ +#define MXVR_CMTB_START_ADDR 0xffc02858 /* MXVR Control Message TX Buffer Start Addr Register */ +#define MXVR_CMTB_CURR_ADDR 0xffc0285c /* MXVR Control Message TX Buffer Current Address */ + +/* MXVR Remote Read Registers */ + +#define MXVR_RRDB_START_ADDR 0xffc02860 /* MXVR Remote Read Buffer Start Addr Register */ +#define MXVR_RRDB_CURR_ADDR 0xffc02864 /* MXVR Remote Read Buffer Current Addr Register */ + +/* MXVR Pattern Data Registers */ + +#define MXVR_PAT_DATA_0 0xffc02868 /* MXVR Pattern Data Register 0 */ +#define MXVR_PAT_EN_0 0xffc0286c /* MXVR Pattern Enable Register 0 */ +#define MXVR_PAT_DATA_1 0xffc02870 /* MXVR Pattern Data Register 1 */ +#define MXVR_PAT_EN_1 0xffc02874 /* MXVR Pattern Enable Register 1 */ + +/* MXVR Frame Counter Registers */ + +#define MXVR_FRAME_CNT_0 0xffc02878 /* MXVR Frame Counter 0 */ +#define MXVR_FRAME_CNT_1 0xffc0287c /* MXVR Frame Counter 1 */ + +/* MXVR Routing Table Registers */ + +#define MXVR_ROUTING_0 0xffc02880 /* MXVR Routing Table Register 0 */ +#define MXVR_ROUTING_1 0xffc02884 /* MXVR Routing Table Register 1 */ +#define MXVR_ROUTING_2 0xffc02888 /* MXVR Routing Table Register 2 */ +#define MXVR_ROUTING_3 0xffc0288c /* MXVR Routing Table Register 3 */ +#define MXVR_ROUTING_4 0xffc02890 /* MXVR Routing Table Register 4 */ +#define MXVR_ROUTING_5 0xffc02894 /* MXVR Routing Table Register 5 */ +#define MXVR_ROUTING_6 0xffc02898 /* MXVR Routing Table Register 6 */ +#define MXVR_ROUTING_7 0xffc0289c /* MXVR Routing Table Register 7 */ +#define MXVR_ROUTING_8 0xffc028a0 /* MXVR Routing Table Register 8 */ +#define MXVR_ROUTING_9 0xffc028a4 /* MXVR Routing Table Register 9 */ +#define MXVR_ROUTING_10 0xffc028a8 /* MXVR Routing Table Register 10 */ +#define MXVR_ROUTING_11 0xffc028ac /* MXVR Routing Table Register 11 */ +#define MXVR_ROUTING_12 0xffc028b0 /* MXVR Routing Table Register 12 */ +#define MXVR_ROUTING_13 0xffc028b4 /* MXVR Routing Table Register 13 */ +#define MXVR_ROUTING_14 0xffc028b8 /* MXVR Routing Table Register 14 */ + +/* MXVR Counter-Clock-Control Registers */ + +#define MXVR_BLOCK_CNT 0xffc028c0 /* MXVR Block Counter */ +#define MXVR_CLK_CTL 0xffc028d0 /* MXVR Clock Control Register */ +#define MXVR_CDRPLL_CTL 0xffc028d4 /* MXVR Clock/Data Recovery PLL Control Register */ +#define MXVR_FMPLL_CTL 0xffc028d8 /* MXVR Frequency Multiply PLL Control Register */ +#define MXVR_PIN_CTL 0xffc028dc /* MXVR Pin Control Register */ +#define MXVR_SCLK_CNT 0xffc028e0 /* MXVR System Clock Counter Register */ + +/* CAN Controller 1 Config 1 Registers */ + +#define CAN1_MC1 0xffc03200 /* CAN Controller 1 Mailbox Configuration Register 1 */ +#define CAN1_MD1 0xffc03204 /* CAN Controller 1 Mailbox Direction Register 1 */ +#define CAN1_TRS1 0xffc03208 /* CAN Controller 1 Transmit Request Set Register 1 */ +#define CAN1_TRR1 0xffc0320c /* CAN Controller 1 Transmit Request Reset Register 1 */ +#define CAN1_TA1 0xffc03210 /* CAN Controller 1 Transmit Acknowledge Register 1 */ +#define CAN1_AA1 0xffc03214 /* CAN Controller 1 Abort Acknowledge Register 1 */ +#define CAN1_RMP1 0xffc03218 /* CAN Controller 1 Receive Message Pending Register 1 */ +#define CAN1_RML1 0xffc0321c /* CAN Controller 1 Receive Message Lost Register 1 */ +#define CAN1_MBTIF1 0xffc03220 /* CAN Controller 1 Mailbox Transmit Interrupt Flag Register 1 */ +#define CAN1_MBRIF1 0xffc03224 /* CAN Controller 1 Mailbox Receive Interrupt Flag Register 1 */ +#define CAN1_MBIM1 0xffc03228 /* CAN Controller 1 Mailbox Interrupt Mask Register 1 */ +#define CAN1_RFH1 0xffc0322c /* CAN Controller 1 Remote Frame Handling Enable Register 1 */ +#define CAN1_OPSS1 0xffc03230 /* CAN Controller 1 Overwrite Protection Single Shot Transmit Register 1 */ + +/* CAN Controller 1 Config 2 Registers */ + +#define CAN1_MC2 0xffc03240 /* CAN Controller 1 Mailbox Configuration Register 2 */ +#define CAN1_MD2 0xffc03244 /* CAN Controller 1 Mailbox Direction Register 2 */ +#define CAN1_TRS2 0xffc03248 /* CAN Controller 1 Transmit Request Set Register 2 */ +#define CAN1_TRR2 0xffc0324c /* CAN Controller 1 Transmit Request Reset Register 2 */ +#define CAN1_TA2 0xffc03250 /* CAN Controller 1 Transmit Acknowledge Register 2 */ +#define CAN1_AA2 0xffc03254 /* CAN Controller 1 Abort Acknowledge Register 2 */ +#define CAN1_RMP2 0xffc03258 /* CAN Controller 1 Receive Message Pending Register 2 */ +#define CAN1_RML2 0xffc0325c /* CAN Controller 1 Receive Message Lost Register 2 */ +#define CAN1_MBTIF2 0xffc03260 /* CAN Controller 1 Mailbox Transmit Interrupt Flag Register 2 */ +#define CAN1_MBRIF2 0xffc03264 /* CAN Controller 1 Mailbox Receive Interrupt Flag Register 2 */ +#define CAN1_MBIM2 0xffc03268 /* CAN Controller 1 Mailbox Interrupt Mask Register 2 */ +#define CAN1_RFH2 0xffc0326c /* CAN Controller 1 Remote Frame Handling Enable Register 2 */ +#define CAN1_OPSS2 0xffc03270 /* CAN Controller 1 Overwrite Protection Single Shot Transmit Register 2 */ + +/* CAN Controller 1 Clock/Interrupt/Counter Registers */ + +#define CAN1_CLOCK 0xffc03280 /* CAN Controller 1 Clock Register */ +#define CAN1_TIMING 0xffc03284 /* CAN Controller 1 Timing Register */ +#define CAN1_DEBUG 0xffc03288 /* CAN Controller 1 Debug Register */ +#define CAN1_STATUS 0xffc0328c /* CAN Controller 1 Global Status Register */ +#define CAN1_CEC 0xffc03290 /* CAN Controller 1 Error Counter Register */ +#define CAN1_GIS 0xffc03294 /* CAN Controller 1 Global Interrupt Status Register */ +#define CAN1_GIM 0xffc03298 /* CAN Controller 1 Global Interrupt Mask Register */ +#define CAN1_GIF 0xffc0329c /* CAN Controller 1 Global Interrupt Flag Register */ +#define CAN1_CONTROL 0xffc032a0 /* CAN Controller 1 Master Control Register */ +#define CAN1_INTR 0xffc032a4 /* CAN Controller 1 Interrupt Pending Register */ +#define CAN1_MBTD 0xffc032ac /* CAN Controller 1 Mailbox Temporary Disable Register */ +#define CAN1_EWR 0xffc032b0 /* CAN Controller 1 Programmable Warning Level Register */ +#define CAN1_ESR 0xffc032b4 /* CAN Controller 1 Error Status Register */ +#define CAN1_UCCNT 0xffc032c4 /* CAN Controller 1 Universal Counter Register */ +#define CAN1_UCRC 0xffc032c8 /* CAN Controller 1 Universal Counter Force Reload Register */ +#define CAN1_UCCNF 0xffc032cc /* CAN Controller 1 Universal Counter Configuration Register */ + +/* CAN Controller 1 Mailbox Acceptance Registers */ + +#define CAN1_AM00L 0xffc03300 /* CAN Controller 1 Mailbox 0 Acceptance Mask High Register */ +#define CAN1_AM00H 0xffc03304 /* CAN Controller 1 Mailbox 0 Acceptance Mask Low Register */ +#define CAN1_AM01L 0xffc03308 /* CAN Controller 1 Mailbox 1 Acceptance Mask High Register */ +#define CAN1_AM01H 0xffc0330c /* CAN Controller 1 Mailbox 1 Acceptance Mask Low Register */ +#define CAN1_AM02L 0xffc03310 /* CAN Controller 1 Mailbox 2 Acceptance Mask High Register */ +#define CAN1_AM02H 0xffc03314 /* CAN Controller 1 Mailbox 2 Acceptance Mask Low Register */ +#define CAN1_AM03L 0xffc03318 /* CAN Controller 1 Mailbox 3 Acceptance Mask High Register */ +#define CAN1_AM03H 0xffc0331c /* CAN Controller 1 Mailbox 3 Acceptance Mask Low Register */ +#define CAN1_AM04L 0xffc03320 /* CAN Controller 1 Mailbox 4 Acceptance Mask High Register */ +#define CAN1_AM04H 0xffc03324 /* CAN Controller 1 Mailbox 4 Acceptance Mask Low Register */ +#define CAN1_AM05L 0xffc03328 /* CAN Controller 1 Mailbox 5 Acceptance Mask High Register */ +#define CAN1_AM05H 0xffc0332c /* CAN Controller 1 Mailbox 5 Acceptance Mask Low Register */ +#define CAN1_AM06L 0xffc03330 /* CAN Controller 1 Mailbox 6 Acceptance Mask High Register */ +#define CAN1_AM06H 0xffc03334 /* CAN Controller 1 Mailbox 6 Acceptance Mask Low Register */ +#define CAN1_AM07L 0xffc03338 /* CAN Controller 1 Mailbox 7 Acceptance Mask High Register */ +#define CAN1_AM07H 0xffc0333c /* CAN Controller 1 Mailbox 7 Acceptance Mask Low Register */ +#define CAN1_AM08L 0xffc03340 /* CAN Controller 1 Mailbox 8 Acceptance Mask High Register */ +#define CAN1_AM08H 0xffc03344 /* CAN Controller 1 Mailbox 8 Acceptance Mask Low Register */ +#define CAN1_AM09L 0xffc03348 /* CAN Controller 1 Mailbox 9 Acceptance Mask High Register */ +#define CAN1_AM09H 0xffc0334c /* CAN Controller 1 Mailbox 9 Acceptance Mask Low Register */ +#define CAN1_AM10L 0xffc03350 /* CAN Controller 1 Mailbox 10 Acceptance Mask High Register */ +#define CAN1_AM10H 0xffc03354 /* CAN Controller 1 Mailbox 10 Acceptance Mask Low Register */ +#define CAN1_AM11L 0xffc03358 /* CAN Controller 1 Mailbox 11 Acceptance Mask High Register */ +#define CAN1_AM11H 0xffc0335c /* CAN Controller 1 Mailbox 11 Acceptance Mask Low Register */ +#define CAN1_AM12L 0xffc03360 /* CAN Controller 1 Mailbox 12 Acceptance Mask High Register */ +#define CAN1_AM12H 0xffc03364 /* CAN Controller 1 Mailbox 12 Acceptance Mask Low Register */ +#define CAN1_AM13L 0xffc03368 /* CAN Controller 1 Mailbox 13 Acceptance Mask High Register */ +#define CAN1_AM13H 0xffc0336c /* CAN Controller 1 Mailbox 13 Acceptance Mask Low Register */ +#define CAN1_AM14L 0xffc03370 /* CAN Controller 1 Mailbox 14 Acceptance Mask High Register */ +#define CAN1_AM14H 0xffc03374 /* CAN Controller 1 Mailbox 14 Acceptance Mask Low Register */ +#define CAN1_AM15L 0xffc03378 /* CAN Controller 1 Mailbox 15 Acceptance Mask High Register */ +#define CAN1_AM15H 0xffc0337c /* CAN Controller 1 Mailbox 15 Acceptance Mask Low Register */ + +/* CAN Controller 1 Mailbox Acceptance Registers */ + +#define CAN1_AM16L 0xffc03380 /* CAN Controller 1 Mailbox 16 Acceptance Mask High Register */ +#define CAN1_AM16H 0xffc03384 /* CAN Controller 1 Mailbox 16 Acceptance Mask Low Register */ +#define CAN1_AM17L 0xffc03388 /* CAN Controller 1 Mailbox 17 Acceptance Mask High Register */ +#define CAN1_AM17H 0xffc0338c /* CAN Controller 1 Mailbox 17 Acceptance Mask Low Register */ +#define CAN1_AM18L 0xffc03390 /* CAN Controller 1 Mailbox 18 Acceptance Mask High Register */ +#define CAN1_AM18H 0xffc03394 /* CAN Controller 1 Mailbox 18 Acceptance Mask Low Register */ +#define CAN1_AM19L 0xffc03398 /* CAN Controller 1 Mailbox 19 Acceptance Mask High Register */ +#define CAN1_AM19H 0xffc0339c /* CAN Controller 1 Mailbox 19 Acceptance Mask Low Register */ +#define CAN1_AM20L 0xffc033a0 /* CAN Controller 1 Mailbox 20 Acceptance Mask High Register */ +#define CAN1_AM20H 0xffc033a4 /* CAN Controller 1 Mailbox 20 Acceptance Mask Low Register */ +#define CAN1_AM21L 0xffc033a8 /* CAN Controller 1 Mailbox 21 Acceptance Mask High Register */ +#define CAN1_AM21H 0xffc033ac /* CAN Controller 1 Mailbox 21 Acceptance Mask Low Register */ +#define CAN1_AM22L 0xffc033b0 /* CAN Controller 1 Mailbox 22 Acceptance Mask High Register */ +#define CAN1_AM22H 0xffc033b4 /* CAN Controller 1 Mailbox 22 Acceptance Mask Low Register */ +#define CAN1_AM23L 0xffc033b8 /* CAN Controller 1 Mailbox 23 Acceptance Mask High Register */ +#define CAN1_AM23H 0xffc033bc /* CAN Controller 1 Mailbox 23 Acceptance Mask Low Register */ +#define CAN1_AM24L 0xffc033c0 /* CAN Controller 1 Mailbox 24 Acceptance Mask High Register */ +#define CAN1_AM24H 0xffc033c4 /* CAN Controller 1 Mailbox 24 Acceptance Mask Low Register */ +#define CAN1_AM25L 0xffc033c8 /* CAN Controller 1 Mailbox 25 Acceptance Mask High Register */ +#define CAN1_AM25H 0xffc033cc /* CAN Controller 1 Mailbox 25 Acceptance Mask Low Register */ +#define CAN1_AM26L 0xffc033d0 /* CAN Controller 1 Mailbox 26 Acceptance Mask High Register */ +#define CAN1_AM26H 0xffc033d4 /* CAN Controller 1 Mailbox 26 Acceptance Mask Low Register */ +#define CAN1_AM27L 0xffc033d8 /* CAN Controller 1 Mailbox 27 Acceptance Mask High Register */ +#define CAN1_AM27H 0xffc033dc /* CAN Controller 1 Mailbox 27 Acceptance Mask Low Register */ +#define CAN1_AM28L 0xffc033e0 /* CAN Controller 1 Mailbox 28 Acceptance Mask High Register */ +#define CAN1_AM28H 0xffc033e4 /* CAN Controller 1 Mailbox 28 Acceptance Mask Low Register */ +#define CAN1_AM29L 0xffc033e8 /* CAN Controller 1 Mailbox 29 Acceptance Mask High Register */ +#define CAN1_AM29H 0xffc033ec /* CAN Controller 1 Mailbox 29 Acceptance Mask Low Register */ +#define CAN1_AM30L 0xffc033f0 /* CAN Controller 1 Mailbox 30 Acceptance Mask High Register */ +#define CAN1_AM30H 0xffc033f4 /* CAN Controller 1 Mailbox 30 Acceptance Mask Low Register */ +#define CAN1_AM31L 0xffc033f8 /* CAN Controller 1 Mailbox 31 Acceptance Mask High Register */ +#define CAN1_AM31H 0xffc033fc /* CAN Controller 1 Mailbox 31 Acceptance Mask Low Register */ + +/* CAN Controller 1 Mailbox Data Registers */ + +#define CAN1_MB00_DATA0 0xffc03400 /* CAN Controller 1 Mailbox 0 Data 0 Register */ +#define CAN1_MB00_DATA1 0xffc03404 /* CAN Controller 1 Mailbox 0 Data 1 Register */ +#define CAN1_MB00_DATA2 0xffc03408 /* CAN Controller 1 Mailbox 0 Data 2 Register */ +#define CAN1_MB00_DATA3 0xffc0340c /* CAN Controller 1 Mailbox 0 Data 3 Register */ +#define CAN1_MB00_LENGTH 0xffc03410 /* CAN Controller 1 Mailbox 0 Length Register */ +#define CAN1_MB00_TIMESTAMP 0xffc03414 /* CAN Controller 1 Mailbox 0 Timestamp Register */ +#define CAN1_MB00_ID0 0xffc03418 /* CAN Controller 1 Mailbox 0 ID0 Register */ +#define CAN1_MB00_ID1 0xffc0341c /* CAN Controller 1 Mailbox 0 ID1 Register */ +#define CAN1_MB01_DATA0 0xffc03420 /* CAN Controller 1 Mailbox 1 Data 0 Register */ +#define CAN1_MB01_DATA1 0xffc03424 /* CAN Controller 1 Mailbox 1 Data 1 Register */ +#define CAN1_MB01_DATA2 0xffc03428 /* CAN Controller 1 Mailbox 1 Data 2 Register */ +#define CAN1_MB01_DATA3 0xffc0342c /* CAN Controller 1 Mailbox 1 Data 3 Register */ +#define CAN1_MB01_LENGTH 0xffc03430 /* CAN Controller 1 Mailbox 1 Length Register */ +#define CAN1_MB01_TIMESTAMP 0xffc03434 /* CAN Controller 1 Mailbox 1 Timestamp Register */ +#define CAN1_MB01_ID0 0xffc03438 /* CAN Controller 1 Mailbox 1 ID0 Register */ +#define CAN1_MB01_ID1 0xffc0343c /* CAN Controller 1 Mailbox 1 ID1 Register */ +#define CAN1_MB02_DATA0 0xffc03440 /* CAN Controller 1 Mailbox 2 Data 0 Register */ +#define CAN1_MB02_DATA1 0xffc03444 /* CAN Controller 1 Mailbox 2 Data 1 Register */ +#define CAN1_MB02_DATA2 0xffc03448 /* CAN Controller 1 Mailbox 2 Data 2 Register */ +#define CAN1_MB02_DATA3 0xffc0344c /* CAN Controller 1 Mailbox 2 Data 3 Register */ +#define CAN1_MB02_LENGTH 0xffc03450 /* CAN Controller 1 Mailbox 2 Length Register */ +#define CAN1_MB02_TIMESTAMP 0xffc03454 /* CAN Controller 1 Mailbox 2 Timestamp Register */ +#define CAN1_MB02_ID0 0xffc03458 /* CAN Controller 1 Mailbox 2 ID0 Register */ +#define CAN1_MB02_ID1 0xffc0345c /* CAN Controller 1 Mailbox 2 ID1 Register */ +#define CAN1_MB03_DATA0 0xffc03460 /* CAN Controller 1 Mailbox 3 Data 0 Register */ +#define CAN1_MB03_DATA1 0xffc03464 /* CAN Controller 1 Mailbox 3 Data 1 Register */ +#define CAN1_MB03_DATA2 0xffc03468 /* CAN Controller 1 Mailbox 3 Data 2 Register */ +#define CAN1_MB03_DATA3 0xffc0346c /* CAN Controller 1 Mailbox 3 Data 3 Register */ +#define CAN1_MB03_LENGTH 0xffc03470 /* CAN Controller 1 Mailbox 3 Length Register */ +#define CAN1_MB03_TIMESTAMP 0xffc03474 /* CAN Controller 1 Mailbox 3 Timestamp Register */ +#define CAN1_MB03_ID0 0xffc03478 /* CAN Controller 1 Mailbox 3 ID0 Register */ +#define CAN1_MB03_ID1 0xffc0347c /* CAN Controller 1 Mailbox 3 ID1 Register */ +#define CAN1_MB04_DATA0 0xffc03480 /* CAN Controller 1 Mailbox 4 Data 0 Register */ +#define CAN1_MB04_DATA1 0xffc03484 /* CAN Controller 1 Mailbox 4 Data 1 Register */ +#define CAN1_MB04_DATA2 0xffc03488 /* CAN Controller 1 Mailbox 4 Data 2 Register */ +#define CAN1_MB04_DATA3 0xffc0348c /* CAN Controller 1 Mailbox 4 Data 3 Register */ +#define CAN1_MB04_LENGTH 0xffc03490 /* CAN Controller 1 Mailbox 4 Length Register */ +#define CAN1_MB04_TIMESTAMP 0xffc03494 /* CAN Controller 1 Mailbox 4 Timestamp Register */ +#define CAN1_MB04_ID0 0xffc03498 /* CAN Controller 1 Mailbox 4 ID0 Register */ +#define CAN1_MB04_ID1 0xffc0349c /* CAN Controller 1 Mailbox 4 ID1 Register */ +#define CAN1_MB05_DATA0 0xffc034a0 /* CAN Controller 1 Mailbox 5 Data 0 Register */ +#define CAN1_MB05_DATA1 0xffc034a4 /* CAN Controller 1 Mailbox 5 Data 1 Register */ +#define CAN1_MB05_DATA2 0xffc034a8 /* CAN Controller 1 Mailbox 5 Data 2 Register */ +#define CAN1_MB05_DATA3 0xffc034ac /* CAN Controller 1 Mailbox 5 Data 3 Register */ +#define CAN1_MB05_LENGTH 0xffc034b0 /* CAN Controller 1 Mailbox 5 Length Register */ +#define CAN1_MB05_TIMESTAMP 0xffc034b4 /* CAN Controller 1 Mailbox 5 Timestamp Register */ +#define CAN1_MB05_ID0 0xffc034b8 /* CAN Controller 1 Mailbox 5 ID0 Register */ +#define CAN1_MB05_ID1 0xffc034bc /* CAN Controller 1 Mailbox 5 ID1 Register */ +#define CAN1_MB06_DATA0 0xffc034c0 /* CAN Controller 1 Mailbox 6 Data 0 Register */ +#define CAN1_MB06_DATA1 0xffc034c4 /* CAN Controller 1 Mailbox 6 Data 1 Register */ +#define CAN1_MB06_DATA2 0xffc034c8 /* CAN Controller 1 Mailbox 6 Data 2 Register */ +#define CAN1_MB06_DATA3 0xffc034cc /* CAN Controller 1 Mailbox 6 Data 3 Register */ +#define CAN1_MB06_LENGTH 0xffc034d0 /* CAN Controller 1 Mailbox 6 Length Register */ +#define CAN1_MB06_TIMESTAMP 0xffc034d4 /* CAN Controller 1 Mailbox 6 Timestamp Register */ +#define CAN1_MB06_ID0 0xffc034d8 /* CAN Controller 1 Mailbox 6 ID0 Register */ +#define CAN1_MB06_ID1 0xffc034dc /* CAN Controller 1 Mailbox 6 ID1 Register */ +#define CAN1_MB07_DATA0 0xffc034e0 /* CAN Controller 1 Mailbox 7 Data 0 Register */ +#define CAN1_MB07_DATA1 0xffc034e4 /* CAN Controller 1 Mailbox 7 Data 1 Register */ +#define CAN1_MB07_DATA2 0xffc034e8 /* CAN Controller 1 Mailbox 7 Data 2 Register */ +#define CAN1_MB07_DATA3 0xffc034ec /* CAN Controller 1 Mailbox 7 Data 3 Register */ +#define CAN1_MB07_LENGTH 0xffc034f0 /* CAN Controller 1 Mailbox 7 Length Register */ +#define CAN1_MB07_TIMESTAMP 0xffc034f4 /* CAN Controller 1 Mailbox 7 Timestamp Register */ +#define CAN1_MB07_ID0 0xffc034f8 /* CAN Controller 1 Mailbox 7 ID0 Register */ +#define CAN1_MB07_ID1 0xffc034fc /* CAN Controller 1 Mailbox 7 ID1 Register */ +#define CAN1_MB08_DATA0 0xffc03500 /* CAN Controller 1 Mailbox 8 Data 0 Register */ +#define CAN1_MB08_DATA1 0xffc03504 /* CAN Controller 1 Mailbox 8 Data 1 Register */ +#define CAN1_MB08_DATA2 0xffc03508 /* CAN Controller 1 Mailbox 8 Data 2 Register */ +#define CAN1_MB08_DATA3 0xffc0350c /* CAN Controller 1 Mailbox 8 Data 3 Register */ +#define CAN1_MB08_LENGTH 0xffc03510 /* CAN Controller 1 Mailbox 8 Length Register */ +#define CAN1_MB08_TIMESTAMP 0xffc03514 /* CAN Controller 1 Mailbox 8 Timestamp Register */ +#define CAN1_MB08_ID0 0xffc03518 /* CAN Controller 1 Mailbox 8 ID0 Register */ +#define CAN1_MB08_ID1 0xffc0351c /* CAN Controller 1 Mailbox 8 ID1 Register */ +#define CAN1_MB09_DATA0 0xffc03520 /* CAN Controller 1 Mailbox 9 Data 0 Register */ +#define CAN1_MB09_DATA1 0xffc03524 /* CAN Controller 1 Mailbox 9 Data 1 Register */ +#define CAN1_MB09_DATA2 0xffc03528 /* CAN Controller 1 Mailbox 9 Data 2 Register */ +#define CAN1_MB09_DATA3 0xffc0352c /* CAN Controller 1 Mailbox 9 Data 3 Register */ +#define CAN1_MB09_LENGTH 0xffc03530 /* CAN Controller 1 Mailbox 9 Length Register */ +#define CAN1_MB09_TIMESTAMP 0xffc03534 /* CAN Controller 1 Mailbox 9 Timestamp Register */ +#define CAN1_MB09_ID0 0xffc03538 /* CAN Controller 1 Mailbox 9 ID0 Register */ +#define CAN1_MB09_ID1 0xffc0353c /* CAN Controller 1 Mailbox 9 ID1 Register */ +#define CAN1_MB10_DATA0 0xffc03540 /* CAN Controller 1 Mailbox 10 Data 0 Register */ +#define CAN1_MB10_DATA1 0xffc03544 /* CAN Controller 1 Mailbox 10 Data 1 Register */ +#define CAN1_MB10_DATA2 0xffc03548 /* CAN Controller 1 Mailbox 10 Data 2 Register */ +#define CAN1_MB10_DATA3 0xffc0354c /* CAN Controller 1 Mailbox 10 Data 3 Register */ +#define CAN1_MB10_LENGTH 0xffc03550 /* CAN Controller 1 Mailbox 10 Length Register */ +#define CAN1_MB10_TIMESTAMP 0xffc03554 /* CAN Controller 1 Mailbox 10 Timestamp Register */ +#define CAN1_MB10_ID0 0xffc03558 /* CAN Controller 1 Mailbox 10 ID0 Register */ +#define CAN1_MB10_ID1 0xffc0355c /* CAN Controller 1 Mailbox 10 ID1 Register */ +#define CAN1_MB11_DATA0 0xffc03560 /* CAN Controller 1 Mailbox 11 Data 0 Register */ +#define CAN1_MB11_DATA1 0xffc03564 /* CAN Controller 1 Mailbox 11 Data 1 Register */ +#define CAN1_MB11_DATA2 0xffc03568 /* CAN Controller 1 Mailbox 11 Data 2 Register */ +#define CAN1_MB11_DATA3 0xffc0356c /* CAN Controller 1 Mailbox 11 Data 3 Register */ +#define CAN1_MB11_LENGTH 0xffc03570 /* CAN Controller 1 Mailbox 11 Length Register */ +#define CAN1_MB11_TIMESTAMP 0xffc03574 /* CAN Controller 1 Mailbox 11 Timestamp Register */ +#define CAN1_MB11_ID0 0xffc03578 /* CAN Controller 1 Mailbox 11 ID0 Register */ +#define CAN1_MB11_ID1 0xffc0357c /* CAN Controller 1 Mailbox 11 ID1 Register */ +#define CAN1_MB12_DATA0 0xffc03580 /* CAN Controller 1 Mailbox 12 Data 0 Register */ +#define CAN1_MB12_DATA1 0xffc03584 /* CAN Controller 1 Mailbox 12 Data 1 Register */ +#define CAN1_MB12_DATA2 0xffc03588 /* CAN Controller 1 Mailbox 12 Data 2 Register */ +#define CAN1_MB12_DATA3 0xffc0358c /* CAN Controller 1 Mailbox 12 Data 3 Register */ +#define CAN1_MB12_LENGTH 0xffc03590 /* CAN Controller 1 Mailbox 12 Length Register */ +#define CAN1_MB12_TIMESTAMP 0xffc03594 /* CAN Controller 1 Mailbox 12 Timestamp Register */ +#define CAN1_MB12_ID0 0xffc03598 /* CAN Controller 1 Mailbox 12 ID0 Register */ +#define CAN1_MB12_ID1 0xffc0359c /* CAN Controller 1 Mailbox 12 ID1 Register */ +#define CAN1_MB13_DATA0 0xffc035a0 /* CAN Controller 1 Mailbox 13 Data 0 Register */ +#define CAN1_MB13_DATA1 0xffc035a4 /* CAN Controller 1 Mailbox 13 Data 1 Register */ +#define CAN1_MB13_DATA2 0xffc035a8 /* CAN Controller 1 Mailbox 13 Data 2 Register */ +#define CAN1_MB13_DATA3 0xffc035ac /* CAN Controller 1 Mailbox 13 Data 3 Register */ +#define CAN1_MB13_LENGTH 0xffc035b0 /* CAN Controller 1 Mailbox 13 Length Register */ +#define CAN1_MB13_TIMESTAMP 0xffc035b4 /* CAN Controller 1 Mailbox 13 Timestamp Register */ +#define CAN1_MB13_ID0 0xffc035b8 /* CAN Controller 1 Mailbox 13 ID0 Register */ +#define CAN1_MB13_ID1 0xffc035bc /* CAN Controller 1 Mailbox 13 ID1 Register */ +#define CAN1_MB14_DATA0 0xffc035c0 /* CAN Controller 1 Mailbox 14 Data 0 Register */ +#define CAN1_MB14_DATA1 0xffc035c4 /* CAN Controller 1 Mailbox 14 Data 1 Register */ +#define CAN1_MB14_DATA2 0xffc035c8 /* CAN Controller 1 Mailbox 14 Data 2 Register */ +#define CAN1_MB14_DATA3 0xffc035cc /* CAN Controller 1 Mailbox 14 Data 3 Register */ +#define CAN1_MB14_LENGTH 0xffc035d0 /* CAN Controller 1 Mailbox 14 Length Register */ +#define CAN1_MB14_TIMESTAMP 0xffc035d4 /* CAN Controller 1 Mailbox 14 Timestamp Register */ +#define CAN1_MB14_ID0 0xffc035d8 /* CAN Controller 1 Mailbox 14 ID0 Register */ +#define CAN1_MB14_ID1 0xffc035dc /* CAN Controller 1 Mailbox 14 ID1 Register */ +#define CAN1_MB15_DATA0 0xffc035e0 /* CAN Controller 1 Mailbox 15 Data 0 Register */ +#define CAN1_MB15_DATA1 0xffc035e4 /* CAN Controller 1 Mailbox 15 Data 1 Register */ +#define CAN1_MB15_DATA2 0xffc035e8 /* CAN Controller 1 Mailbox 15 Data 2 Register */ +#define CAN1_MB15_DATA3 0xffc035ec /* CAN Controller 1 Mailbox 15 Data 3 Register */ +#define CAN1_MB15_LENGTH 0xffc035f0 /* CAN Controller 1 Mailbox 15 Length Register */ +#define CAN1_MB15_TIMESTAMP 0xffc035f4 /* CAN Controller 1 Mailbox 15 Timestamp Register */ +#define CAN1_MB15_ID0 0xffc035f8 /* CAN Controller 1 Mailbox 15 ID0 Register */ +#define CAN1_MB15_ID1 0xffc035fc /* CAN Controller 1 Mailbox 15 ID1 Register */ + +/* CAN Controller 1 Mailbox Data Registers */ + +#define CAN1_MB16_DATA0 0xffc03600 /* CAN Controller 1 Mailbox 16 Data 0 Register */ +#define CAN1_MB16_DATA1 0xffc03604 /* CAN Controller 1 Mailbox 16 Data 1 Register */ +#define CAN1_MB16_DATA2 0xffc03608 /* CAN Controller 1 Mailbox 16 Data 2 Register */ +#define CAN1_MB16_DATA3 0xffc0360c /* CAN Controller 1 Mailbox 16 Data 3 Register */ +#define CAN1_MB16_LENGTH 0xffc03610 /* CAN Controller 1 Mailbox 16 Length Register */ +#define CAN1_MB16_TIMESTAMP 0xffc03614 /* CAN Controller 1 Mailbox 16 Timestamp Register */ +#define CAN1_MB16_ID0 0xffc03618 /* CAN Controller 1 Mailbox 16 ID0 Register */ +#define CAN1_MB16_ID1 0xffc0361c /* CAN Controller 1 Mailbox 16 ID1 Register */ +#define CAN1_MB17_DATA0 0xffc03620 /* CAN Controller 1 Mailbox 17 Data 0 Register */ +#define CAN1_MB17_DATA1 0xffc03624 /* CAN Controller 1 Mailbox 17 Data 1 Register */ +#define CAN1_MB17_DATA2 0xffc03628 /* CAN Controller 1 Mailbox 17 Data 2 Register */ +#define CAN1_MB17_DATA3 0xffc0362c /* CAN Controller 1 Mailbox 17 Data 3 Register */ +#define CAN1_MB17_LENGTH 0xffc03630 /* CAN Controller 1 Mailbox 17 Length Register */ +#define CAN1_MB17_TIMESTAMP 0xffc03634 /* CAN Controller 1 Mailbox 17 Timestamp Register */ +#define CAN1_MB17_ID0 0xffc03638 /* CAN Controller 1 Mailbox 17 ID0 Register */ +#define CAN1_MB17_ID1 0xffc0363c /* CAN Controller 1 Mailbox 17 ID1 Register */ +#define CAN1_MB18_DATA0 0xffc03640 /* CAN Controller 1 Mailbox 18 Data 0 Register */ +#define CAN1_MB18_DATA1 0xffc03644 /* CAN Controller 1 Mailbox 18 Data 1 Register */ +#define CAN1_MB18_DATA2 0xffc03648 /* CAN Controller 1 Mailbox 18 Data 2 Register */ +#define CAN1_MB18_DATA3 0xffc0364c /* CAN Controller 1 Mailbox 18 Data 3 Register */ +#define CAN1_MB18_LENGTH 0xffc03650 /* CAN Controller 1 Mailbox 18 Length Register */ +#define CAN1_MB18_TIMESTAMP 0xffc03654 /* CAN Controller 1 Mailbox 18 Timestamp Register */ +#define CAN1_MB18_ID0 0xffc03658 /* CAN Controller 1 Mailbox 18 ID0 Register */ +#define CAN1_MB18_ID1 0xffc0365c /* CAN Controller 1 Mailbox 18 ID1 Register */ +#define CAN1_MB19_DATA0 0xffc03660 /* CAN Controller 1 Mailbox 19 Data 0 Register */ +#define CAN1_MB19_DATA1 0xffc03664 /* CAN Controller 1 Mailbox 19 Data 1 Register */ +#define CAN1_MB19_DATA2 0xffc03668 /* CAN Controller 1 Mailbox 19 Data 2 Register */ +#define CAN1_MB19_DATA3 0xffc0366c /* CAN Controller 1 Mailbox 19 Data 3 Register */ +#define CAN1_MB19_LENGTH 0xffc03670 /* CAN Controller 1 Mailbox 19 Length Register */ +#define CAN1_MB19_TIMESTAMP 0xffc03674 /* CAN Controller 1 Mailbox 19 Timestamp Register */ +#define CAN1_MB19_ID0 0xffc03678 /* CAN Controller 1 Mailbox 19 ID0 Register */ +#define CAN1_MB19_ID1 0xffc0367c /* CAN Controller 1 Mailbox 19 ID1 Register */ +#define CAN1_MB20_DATA0 0xffc03680 /* CAN Controller 1 Mailbox 20 Data 0 Register */ +#define CAN1_MB20_DATA1 0xffc03684 /* CAN Controller 1 Mailbox 20 Data 1 Register */ +#define CAN1_MB20_DATA2 0xffc03688 /* CAN Controller 1 Mailbox 20 Data 2 Register */ +#define CAN1_MB20_DATA3 0xffc0368c /* CAN Controller 1 Mailbox 20 Data 3 Register */ +#define CAN1_MB20_LENGTH 0xffc03690 /* CAN Controller 1 Mailbox 20 Length Register */ +#define CAN1_MB20_TIMESTAMP 0xffc03694 /* CAN Controller 1 Mailbox 20 Timestamp Register */ +#define CAN1_MB20_ID0 0xffc03698 /* CAN Controller 1 Mailbox 20 ID0 Register */ +#define CAN1_MB20_ID1 0xffc0369c /* CAN Controller 1 Mailbox 20 ID1 Register */ +#define CAN1_MB21_DATA0 0xffc036a0 /* CAN Controller 1 Mailbox 21 Data 0 Register */ +#define CAN1_MB21_DATA1 0xffc036a4 /* CAN Controller 1 Mailbox 21 Data 1 Register */ +#define CAN1_MB21_DATA2 0xffc036a8 /* CAN Controller 1 Mailbox 21 Data 2 Register */ +#define CAN1_MB21_DATA3 0xffc036ac /* CAN Controller 1 Mailbox 21 Data 3 Register */ +#define CAN1_MB21_LENGTH 0xffc036b0 /* CAN Controller 1 Mailbox 21 Length Register */ +#define CAN1_MB21_TIMESTAMP 0xffc036b4 /* CAN Controller 1 Mailbox 21 Timestamp Register */ +#define CAN1_MB21_ID0 0xffc036b8 /* CAN Controller 1 Mailbox 21 ID0 Register */ +#define CAN1_MB21_ID1 0xffc036bc /* CAN Controller 1 Mailbox 21 ID1 Register */ +#define CAN1_MB22_DATA0 0xffc036c0 /* CAN Controller 1 Mailbox 22 Data 0 Register */ +#define CAN1_MB22_DATA1 0xffc036c4 /* CAN Controller 1 Mailbox 22 Data 1 Register */ +#define CAN1_MB22_DATA2 0xffc036c8 /* CAN Controller 1 Mailbox 22 Data 2 Register */ +#define CAN1_MB22_DATA3 0xffc036cc /* CAN Controller 1 Mailbox 22 Data 3 Register */ +#define CAN1_MB22_LENGTH 0xffc036d0 /* CAN Controller 1 Mailbox 22 Length Register */ +#define CAN1_MB22_TIMESTAMP 0xffc036d4 /* CAN Controller 1 Mailbox 22 Timestamp Register */ +#define CAN1_MB22_ID0 0xffc036d8 /* CAN Controller 1 Mailbox 22 ID0 Register */ +#define CAN1_MB22_ID1 0xffc036dc /* CAN Controller 1 Mailbox 22 ID1 Register */ +#define CAN1_MB23_DATA0 0xffc036e0 /* CAN Controller 1 Mailbox 23 Data 0 Register */ +#define CAN1_MB23_DATA1 0xffc036e4 /* CAN Controller 1 Mailbox 23 Data 1 Register */ +#define CAN1_MB23_DATA2 0xffc036e8 /* CAN Controller 1 Mailbox 23 Data 2 Register */ +#define CAN1_MB23_DATA3 0xffc036ec /* CAN Controller 1 Mailbox 23 Data 3 Register */ +#define CAN1_MB23_LENGTH 0xffc036f0 /* CAN Controller 1 Mailbox 23 Length Register */ +#define CAN1_MB23_TIMESTAMP 0xffc036f4 /* CAN Controller 1 Mailbox 23 Timestamp Register */ +#define CAN1_MB23_ID0 0xffc036f8 /* CAN Controller 1 Mailbox 23 ID0 Register */ +#define CAN1_MB23_ID1 0xffc036fc /* CAN Controller 1 Mailbox 23 ID1 Register */ +#define CAN1_MB24_DATA0 0xffc03700 /* CAN Controller 1 Mailbox 24 Data 0 Register */ +#define CAN1_MB24_DATA1 0xffc03704 /* CAN Controller 1 Mailbox 24 Data 1 Register */ +#define CAN1_MB24_DATA2 0xffc03708 /* CAN Controller 1 Mailbox 24 Data 2 Register */ +#define CAN1_MB24_DATA3 0xffc0370c /* CAN Controller 1 Mailbox 24 Data 3 Register */ +#define CAN1_MB24_LENGTH 0xffc03710 /* CAN Controller 1 Mailbox 24 Length Register */ +#define CAN1_MB24_TIMESTAMP 0xffc03714 /* CAN Controller 1 Mailbox 24 Timestamp Register */ +#define CAN1_MB24_ID0 0xffc03718 /* CAN Controller 1 Mailbox 24 ID0 Register */ +#define CAN1_MB24_ID1 0xffc0371c /* CAN Controller 1 Mailbox 24 ID1 Register */ +#define CAN1_MB25_DATA0 0xffc03720 /* CAN Controller 1 Mailbox 25 Data 0 Register */ +#define CAN1_MB25_DATA1 0xffc03724 /* CAN Controller 1 Mailbox 25 Data 1 Register */ +#define CAN1_MB25_DATA2 0xffc03728 /* CAN Controller 1 Mailbox 25 Data 2 Register */ +#define CAN1_MB25_DATA3 0xffc0372c /* CAN Controller 1 Mailbox 25 Data 3 Register */ +#define CAN1_MB25_LENGTH 0xffc03730 /* CAN Controller 1 Mailbox 25 Length Register */ +#define CAN1_MB25_TIMESTAMP 0xffc03734 /* CAN Controller 1 Mailbox 25 Timestamp Register */ +#define CAN1_MB25_ID0 0xffc03738 /* CAN Controller 1 Mailbox 25 ID0 Register */ +#define CAN1_MB25_ID1 0xffc0373c /* CAN Controller 1 Mailbox 25 ID1 Register */ +#define CAN1_MB26_DATA0 0xffc03740 /* CAN Controller 1 Mailbox 26 Data 0 Register */ +#define CAN1_MB26_DATA1 0xffc03744 /* CAN Controller 1 Mailbox 26 Data 1 Register */ +#define CAN1_MB26_DATA2 0xffc03748 /* CAN Controller 1 Mailbox 26 Data 2 Register */ +#define CAN1_MB26_DATA3 0xffc0374c /* CAN Controller 1 Mailbox 26 Data 3 Register */ +#define CAN1_MB26_LENGTH 0xffc03750 /* CAN Controller 1 Mailbox 26 Length Register */ +#define CAN1_MB26_TIMESTAMP 0xffc03754 /* CAN Controller 1 Mailbox 26 Timestamp Register */ +#define CAN1_MB26_ID0 0xffc03758 /* CAN Controller 1 Mailbox 26 ID0 Register */ +#define CAN1_MB26_ID1 0xffc0375c /* CAN Controller 1 Mailbox 26 ID1 Register */ +#define CAN1_MB27_DATA0 0xffc03760 /* CAN Controller 1 Mailbox 27 Data 0 Register */ +#define CAN1_MB27_DATA1 0xffc03764 /* CAN Controller 1 Mailbox 27 Data 1 Register */ +#define CAN1_MB27_DATA2 0xffc03768 /* CAN Controller 1 Mailbox 27 Data 2 Register */ +#define CAN1_MB27_DATA3 0xffc0376c /* CAN Controller 1 Mailbox 27 Data 3 Register */ +#define CAN1_MB27_LENGTH 0xffc03770 /* CAN Controller 1 Mailbox 27 Length Register */ +#define CAN1_MB27_TIMESTAMP 0xffc03774 /* CAN Controller 1 Mailbox 27 Timestamp Register */ +#define CAN1_MB27_ID0 0xffc03778 /* CAN Controller 1 Mailbox 27 ID0 Register */ +#define CAN1_MB27_ID1 0xffc0377c /* CAN Controller 1 Mailbox 27 ID1 Register */ +#define CAN1_MB28_DATA0 0xffc03780 /* CAN Controller 1 Mailbox 28 Data 0 Register */ +#define CAN1_MB28_DATA1 0xffc03784 /* CAN Controller 1 Mailbox 28 Data 1 Register */ +#define CAN1_MB28_DATA2 0xffc03788 /* CAN Controller 1 Mailbox 28 Data 2 Register */ +#define CAN1_MB28_DATA3 0xffc0378c /* CAN Controller 1 Mailbox 28 Data 3 Register */ +#define CAN1_MB28_LENGTH 0xffc03790 /* CAN Controller 1 Mailbox 28 Length Register */ +#define CAN1_MB28_TIMESTAMP 0xffc03794 /* CAN Controller 1 Mailbox 28 Timestamp Register */ +#define CAN1_MB28_ID0 0xffc03798 /* CAN Controller 1 Mailbox 28 ID0 Register */ +#define CAN1_MB28_ID1 0xffc0379c /* CAN Controller 1 Mailbox 28 ID1 Register */ +#define CAN1_MB29_DATA0 0xffc037a0 /* CAN Controller 1 Mailbox 29 Data 0 Register */ +#define CAN1_MB29_DATA1 0xffc037a4 /* CAN Controller 1 Mailbox 29 Data 1 Register */ +#define CAN1_MB29_DATA2 0xffc037a8 /* CAN Controller 1 Mailbox 29 Data 2 Register */ +#define CAN1_MB29_DATA3 0xffc037ac /* CAN Controller 1 Mailbox 29 Data 3 Register */ +#define CAN1_MB29_LENGTH 0xffc037b0 /* CAN Controller 1 Mailbox 29 Length Register */ +#define CAN1_MB29_TIMESTAMP 0xffc037b4 /* CAN Controller 1 Mailbox 29 Timestamp Register */ +#define CAN1_MB29_ID0 0xffc037b8 /* CAN Controller 1 Mailbox 29 ID0 Register */ +#define CAN1_MB29_ID1 0xffc037bc /* CAN Controller 1 Mailbox 29 ID1 Register */ +#define CAN1_MB30_DATA0 0xffc037c0 /* CAN Controller 1 Mailbox 30 Data 0 Register */ +#define CAN1_MB30_DATA1 0xffc037c4 /* CAN Controller 1 Mailbox 30 Data 1 Register */ +#define CAN1_MB30_DATA2 0xffc037c8 /* CAN Controller 1 Mailbox 30 Data 2 Register */ +#define CAN1_MB30_DATA3 0xffc037cc /* CAN Controller 1 Mailbox 30 Data 3 Register */ +#define CAN1_MB30_LENGTH 0xffc037d0 /* CAN Controller 1 Mailbox 30 Length Register */ +#define CAN1_MB30_TIMESTAMP 0xffc037d4 /* CAN Controller 1 Mailbox 30 Timestamp Register */ +#define CAN1_MB30_ID0 0xffc037d8 /* CAN Controller 1 Mailbox 30 ID0 Register */ +#define CAN1_MB30_ID1 0xffc037dc /* CAN Controller 1 Mailbox 30 ID1 Register */ +#define CAN1_MB31_DATA0 0xffc037e0 /* CAN Controller 1 Mailbox 31 Data 0 Register */ +#define CAN1_MB31_DATA1 0xffc037e4 /* CAN Controller 1 Mailbox 31 Data 1 Register */ +#define CAN1_MB31_DATA2 0xffc037e8 /* CAN Controller 1 Mailbox 31 Data 2 Register */ +#define CAN1_MB31_DATA3 0xffc037ec /* CAN Controller 1 Mailbox 31 Data 3 Register */ +#define CAN1_MB31_LENGTH 0xffc037f0 /* CAN Controller 1 Mailbox 31 Length Register */ +#define CAN1_MB31_TIMESTAMP 0xffc037f4 /* CAN Controller 1 Mailbox 31 Timestamp Register */ +#define CAN1_MB31_ID0 0xffc037f8 /* CAN Controller 1 Mailbox 31 ID0 Register */ +#define CAN1_MB31_ID1 0xffc037fc /* CAN Controller 1 Mailbox 31 ID1 Register */ + +/* ATAPI Registers */ + +#define ATAPI_CONTROL 0xffc03800 /* ATAPI Control Register */ +#define ATAPI_STATUS 0xffc03804 /* ATAPI Status Register */ +#define ATAPI_DEV_ADDR 0xffc03808 /* ATAPI Device Register Address */ +#define ATAPI_DEV_TXBUF 0xffc0380c /* ATAPI Device Register Write Data */ +#define ATAPI_DEV_RXBUF 0xffc03810 /* ATAPI Device Register Read Data */ +#define ATAPI_INT_MASK 0xffc03814 /* ATAPI Interrupt Mask Register */ +#define ATAPI_INT_STATUS 0xffc03818 /* ATAPI Interrupt Status Register */ +#define ATAPI_XFER_LEN 0xffc0381c /* ATAPI Length of Transfer */ +#define ATAPI_LINE_STATUS 0xffc03820 /* ATAPI Line Status */ +#define ATAPI_SM_STATE 0xffc03824 /* ATAPI State Machine Status */ +#define ATAPI_TERMINATE 0xffc03828 /* ATAPI Host Terminate */ +#define ATAPI_PIO_TFRCNT 0xffc0382c /* ATAPI PIO mode transfer count */ +#define ATAPI_DMA_TFRCNT 0xffc03830 /* ATAPI DMA mode transfer count */ +#define ATAPI_UMAIN_TFRCNT 0xffc03834 /* ATAPI UDMAIN transfer count */ +#define ATAPI_UDMAOUT_TFRCNT 0xffc03838 /* ATAPI UDMAOUT transfer count */ +#define ATAPI_REG_TIM_0 0xffc03840 /* ATAPI Register Transfer Timing 0 */ +#define ATAPI_PIO_TIM_0 0xffc03844 /* ATAPI PIO Timing 0 Register */ +#define ATAPI_PIO_TIM_1 0xffc03848 /* ATAPI PIO Timing 1 Register */ +#define ATAPI_MULTI_TIM_0 0xffc03850 /* ATAPI Multi-DMA Timing 0 Register */ +#define ATAPI_MULTI_TIM_1 0xffc03854 /* ATAPI Multi-DMA Timing 1 Register */ +#define ATAPI_MULTI_TIM_2 0xffc03858 /* ATAPI Multi-DMA Timing 2 Register */ +#define ATAPI_ULTRA_TIM_0 0xffc03860 /* ATAPI Ultra-DMA Timing 0 Register */ +#define ATAPI_ULTRA_TIM_1 0xffc03864 /* ATAPI Ultra-DMA Timing 1 Register */ +#define ATAPI_ULTRA_TIM_2 0xffc03868 /* ATAPI Ultra-DMA Timing 2 Register */ +#define ATAPI_ULTRA_TIM_3 0xffc0386c /* ATAPI Ultra-DMA Timing 3 Register */ + +/* SDH Registers */ + +#define SDH_PWR_CTL 0xffc03900 /* SDH Power Control */ +#define SDH_CLK_CTL 0xffc03904 /* SDH Clock Control */ +#define SDH_ARGUMENT 0xffc03908 /* SDH Argument */ +#define SDH_COMMAND 0xffc0390c /* SDH Command */ +#define SDH_RESP_CMD 0xffc03910 /* SDH Response Command */ +#define SDH_RESPONSE0 0xffc03914 /* SDH Response0 */ +#define SDH_RESPONSE1 0xffc03918 /* SDH Response1 */ +#define SDH_RESPONSE2 0xffc0391c /* SDH Response2 */ +#define SDH_RESPONSE3 0xffc03920 /* SDH Response3 */ +#define SDH_DATA_TIMER 0xffc03924 /* SDH Data Timer */ +#define SDH_DATA_LGTH 0xffc03928 /* SDH Data Length */ +#define SDH_DATA_CTL 0xffc0392c /* SDH Data Control */ +#define SDH_DATA_CNT 0xffc03930 /* SDH Data Counter */ +#define SDH_STATUS 0xffc03934 /* SDH Status */ +#define SDH_STATUS_CLR 0xffc03938 /* SDH Status Clear */ +#define SDH_MASK0 0xffc0393c /* SDH Interrupt0 Mask */ +#define SDH_MASK1 0xffc03940 /* SDH Interrupt1 Mask */ +#define SDH_FIFO_CNT 0xffc03948 /* SDH FIFO Counter */ +#define SDH_FIFO 0xffc03980 /* SDH Data FIFO */ +#define SDH_E_STATUS 0xffc039c0 /* SDH Exception Status */ +#define SDH_E_MASK 0xffc039c4 /* SDH Exception Mask */ +#define SDH_CFG 0xffc039c8 /* SDH Configuration */ +#define SDH_RD_WAIT_EN 0xffc039cc /* SDH Read Wait Enable */ +#define SDH_PID0 0xffc039d0 /* SDH Peripheral Identification0 */ +#define SDH_PID1 0xffc039d4 /* SDH Peripheral Identification1 */ +#define SDH_PID2 0xffc039d8 /* SDH Peripheral Identification2 */ +#define SDH_PID3 0xffc039dc /* SDH Peripheral Identification3 */ +#define SDH_PID4 0xffc039e0 /* SDH Peripheral Identification4 */ +#define SDH_PID5 0xffc039e4 /* SDH Peripheral Identification5 */ +#define SDH_PID6 0xffc039e8 /* SDH Peripheral Identification6 */ +#define SDH_PID7 0xffc039ec /* SDH Peripheral Identification7 */ + +/* HOST Port Registers */ + +#define HOST_CONTROL 0xffc03a00 /* HOST Control Register */ +#define HOST_STATUS 0xffc03a04 /* HOST Status Register */ +#define HOST_TIMEOUT 0xffc03a08 /* HOST Acknowledge Mode Timeout Register */ + +/* USB Control Registers */ + +#define USB_FADDR 0xffc03c00 /* Function address register */ +#define USB_POWER 0xffc03c04 /* Power management register */ +#define USB_INTRTX 0xffc03c08 /* Interrupt register for endpoint 0 and Tx endpoint 1 to 7 */ +#define USB_INTRRX 0xffc03c0c /* Interrupt register for Rx endpoints 1 to 7 */ +#define USB_INTRTXE 0xffc03c10 /* Interrupt enable register for IntrTx */ +#define USB_INTRRXE 0xffc03c14 /* Interrupt enable register for IntrRx */ +#define USB_INTRUSB 0xffc03c18 /* Interrupt register for common USB interrupts */ +#define USB_INTRUSBE 0xffc03c1c /* Interrupt enable register for IntrUSB */ +#define USB_FRAME 0xffc03c20 /* USB frame number */ +#define USB_INDEX 0xffc03c24 /* Index register for selecting the indexed endpoint registers */ +#define USB_TESTMODE 0xffc03c28 /* Enabled USB 20 test modes */ +#define USB_GLOBINTR 0xffc03c2c /* Global Interrupt Mask register and Wakeup Exception Interrupt */ +#define USB_GLOBAL_CTL 0xffc03c30 /* Global Clock Control for the core */ + +/* USB Packet Control Registers */ + +#define USB_TX_MAX_PACKET 0xffc03c40 /* Maximum packet size for Host Tx endpoint */ +#define USB_CSR0 0xffc03c44 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */ +#define USB_TXCSR 0xffc03c44 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */ +#define USB_RX_MAX_PACKET 0xffc03c48 /* Maximum packet size for Host Rx endpoint */ +#define USB_RXCSR 0xffc03c4c /* Control Status register for Host Rx endpoint */ +#define USB_COUNT0 0xffc03c50 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */ +#define USB_RXCOUNT 0xffc03c50 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */ +#define USB_TXTYPE 0xffc03c54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint */ +#define USB_NAKLIMIT0 0xffc03c58 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */ +#define USB_TXINTERVAL 0xffc03c58 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */ +#define USB_RXTYPE 0xffc03c5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint */ +#define USB_RXINTERVAL 0xffc03c60 /* Sets the polling interval for Interrupt and Isochronous transfers or the NAK response timeout on Bulk transfers */ +#define USB_TXCOUNT 0xffc03c68 /* Number of bytes to be written to the selected endpoint Tx FIFO */ + +/* USB Endpoint FIFO Registers */ + +#define USB_EP0_FIFO 0xffc03c80 /* Endpoint 0 FIFO */ +#define USB_EP1_FIFO 0xffc03c88 /* Endpoint 1 FIFO */ +#define USB_EP2_FIFO 0xffc03c90 /* Endpoint 2 FIFO */ +#define USB_EP3_FIFO 0xffc03c98 /* Endpoint 3 FIFO */ +#define USB_EP4_FIFO 0xffc03ca0 /* Endpoint 4 FIFO */ +#define USB_EP5_FIFO 0xffc03ca8 /* Endpoint 5 FIFO */ +#define USB_EP6_FIFO 0xffc03cb0 /* Endpoint 6 FIFO */ +#define USB_EP7_FIFO 0xffc03cb8 /* Endpoint 7 FIFO */ + +/* USB OTG Control Registers */ + +#define USB_OTG_DEV_CTL 0xffc03d00 /* OTG Device Control Register */ +#define USB_OTG_VBUS_IRQ 0xffc03d04 /* OTG VBUS Control Interrupts */ +#define USB_OTG_VBUS_MASK 0xffc03d08 /* VBUS Control Interrupt Enable */ + +/* USB Phy Control Registers */ + +#define USB_LINKINFO 0xffc03d48 /* Enables programming of some PHY-side delays */ +#define USB_VPLEN 0xffc03d4c /* Determines duration of VBUS pulse for VBUS charging */ +#define USB_HS_EOF1 0xffc03d50 /* Time buffer for High-Speed transactions */ +#define USB_FS_EOF1 0xffc03d54 /* Time buffer for Full-Speed transactions */ +#define USB_LS_EOF1 0xffc03d58 /* Time buffer for Low-Speed transactions */ + +/* (APHY_CNTRL is for ADI usage only) */ + +#define USB_APHY_CNTRL 0xffc03de0 /* Register that increases visibility of Analog PHY */ + +/* (APHY_CALIB is for ADI usage only) */ + +#define USB_APHY_CALIB 0xffc03de4 /* Register used to set some calibration values */ +#define USB_APHY_CNTRL2 0xffc03de8 /* Register used to prevent re-enumeration once Moab goes into hibernate mode */ + +/* (PHY_TEST is for ADI usage only) */ + +#define USB_PHY_TEST 0xffc03dec /* Used for reducing simulation time and simplifies FIFO testability */ +#define USB_PLLOSC_CTRL 0xffc03df0 /* Used to program different parameters for USB PLL and Oscillator */ +#define USB_SRP_CLKDIV 0xffc03df4 /* Used to program clock divide value for the clock fed to the SRP detection logic */ + +/* USB Endpoint 0 Control Registers */ + +#define USB_EP_NI0_TXMAXP 0xffc03e00 /* Maximum packet size for Host Tx endpoint0 */ +#define USB_EP_NI0_TXCSR 0xffc03e04 /* Control Status register for endpoint 0 */ +#define USB_EP_NI0_RXMAXP 0xffc03e08 /* Maximum packet size for Host Rx endpoint0 */ +#define USB_EP_NI0_RXCSR 0xffc03e0c /* Control Status register for Host Rx endpoint0 */ +#define USB_EP_NI0_RXCOUNT 0xffc03e10 /* Number of bytes received in endpoint 0 FIFO */ +#define USB_EP_NI0_TXTYPE 0xffc03e14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint0 */ +#define USB_EP_NI0_TXINTERVAL 0xffc03e18 /* Sets the NAK response timeout on Endpoint 0 */ +#define USB_EP_NI0_RXTYPE 0xffc03e1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint0 */ +#define USB_EP_NI0_RXINTERVAL 0xffc03e20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint0 */ + +/* USB Endpoint 1 Control Registers */ + +#define USB_EP_NI0_TXCOUNT 0xffc03e28 /* Number of bytes to be written to the endpoint0 Tx FIFO */ +#define USB_EP_NI1_TXMAXP 0xffc03e40 /* Maximum packet size for Host Tx endpoint1 */ +#define USB_EP_NI1_TXCSR 0xffc03e44 /* Control Status register for endpoint1 */ +#define USB_EP_NI1_RXMAXP 0xffc03e48 /* Maximum packet size for Host Rx endpoint1 */ +#define USB_EP_NI1_RXCSR 0xffc03e4c /* Control Status register for Host Rx endpoint1 */ +#define USB_EP_NI1_RXCOUNT 0xffc03e50 /* Number of bytes received in endpoint1 FIFO */ +#define USB_EP_NI1_TXTYPE 0xffc03e54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint1 */ +#define USB_EP_NI1_TXINTERVAL 0xffc03e58 /* Sets the NAK response timeout on Endpoint1 */ +#define USB_EP_NI1_RXTYPE 0xffc03e5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint1 */ +#define USB_EP_NI1_RXINTERVAL 0xffc03e60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint1 */ + +/* USB Endpoint 2 Control Registers */ + +#define USB_EP_NI1_TXCOUNT 0xffc03e68 /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */ +#define USB_EP_NI2_TXMAXP 0xffc03e80 /* Maximum packet size for Host Tx endpoint2 */ +#define USB_EP_NI2_TXCSR 0xffc03e84 /* Control Status register for endpoint2 */ +#define USB_EP_NI2_RXMAXP 0xffc03e88 /* Maximum packet size for Host Rx endpoint2 */ +#define USB_EP_NI2_RXCSR 0xffc03e8c /* Control Status register for Host Rx endpoint2 */ +#define USB_EP_NI2_RXCOUNT 0xffc03e90 /* Number of bytes received in endpoint2 FIFO */ +#define USB_EP_NI2_TXTYPE 0xffc03e94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint2 */ +#define USB_EP_NI2_TXINTERVAL 0xffc03e98 /* Sets the NAK response timeout on Endpoint2 */ +#define USB_EP_NI2_RXTYPE 0xffc03e9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint2 */ +#define USB_EP_NI2_RXINTERVAL 0xffc03ea0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint2 */ + +/* USB Endpoint 3 Control Registers */ + +#define USB_EP_NI2_TXCOUNT 0xffc03ea8 /* Number of bytes to be written to the endpoint2 Tx FIFO */ +#define USB_EP_NI3_TXMAXP 0xffc03ec0 /* Maximum packet size for Host Tx endpoint3 */ +#define USB_EP_NI3_TXCSR 0xffc03ec4 /* Control Status register for endpoint3 */ +#define USB_EP_NI3_RXMAXP 0xffc03ec8 /* Maximum packet size for Host Rx endpoint3 */ +#define USB_EP_NI3_RXCSR 0xffc03ecc /* Control Status register for Host Rx endpoint3 */ +#define USB_EP_NI3_RXCOUNT 0xffc03ed0 /* Number of bytes received in endpoint3 FIFO */ +#define USB_EP_NI3_TXTYPE 0xffc03ed4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint3 */ +#define USB_EP_NI3_TXINTERVAL 0xffc03ed8 /* Sets the NAK response timeout on Endpoint3 */ +#define USB_EP_NI3_RXTYPE 0xffc03edc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint3 */ +#define USB_EP_NI3_RXINTERVAL 0xffc03ee0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint3 */ + +/* USB Endpoint 4 Control Registers */ + +#define USB_EP_NI3_TXCOUNT 0xffc03ee8 /* Number of bytes to be written to the H124endpoint3 Tx FIFO */ +#define USB_EP_NI4_TXMAXP 0xffc03f00 /* Maximum packet size for Host Tx endpoint4 */ +#define USB_EP_NI4_TXCSR 0xffc03f04 /* Control Status register for endpoint4 */ +#define USB_EP_NI4_RXMAXP 0xffc03f08 /* Maximum packet size for Host Rx endpoint4 */ +#define USB_EP_NI4_RXCSR 0xffc03f0c /* Control Status register for Host Rx endpoint4 */ +#define USB_EP_NI4_RXCOUNT 0xffc03f10 /* Number of bytes received in endpoint4 FIFO */ +#define USB_EP_NI4_TXTYPE 0xffc03f14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint4 */ +#define USB_EP_NI4_TXINTERVAL 0xffc03f18 /* Sets the NAK response timeout on Endpoint4 */ +#define USB_EP_NI4_RXTYPE 0xffc03f1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint4 */ +#define USB_EP_NI4_RXINTERVAL 0xffc03f20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint4 */ + +/* USB Endpoint 5 Control Registers */ + +#define USB_EP_NI4_TXCOUNT 0xffc03f28 /* Number of bytes to be written to the endpoint4 Tx FIFO */ +#define USB_EP_NI5_TXMAXP 0xffc03f40 /* Maximum packet size for Host Tx endpoint5 */ +#define USB_EP_NI5_TXCSR 0xffc03f44 /* Control Status register for endpoint5 */ +#define USB_EP_NI5_RXMAXP 0xffc03f48 /* Maximum packet size for Host Rx endpoint5 */ +#define USB_EP_NI5_RXCSR 0xffc03f4c /* Control Status register for Host Rx endpoint5 */ +#define USB_EP_NI5_RXCOUNT 0xffc03f50 /* Number of bytes received in endpoint5 FIFO */ +#define USB_EP_NI5_TXTYPE 0xffc03f54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint5 */ +#define USB_EP_NI5_TXINTERVAL 0xffc03f58 /* Sets the NAK response timeout on Endpoint5 */ +#define USB_EP_NI5_RXTYPE 0xffc03f5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint5 */ +#define USB_EP_NI5_RXINTERVAL 0xffc03f60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint5 */ + +/* USB Endpoint 6 Control Registers */ + +#define USB_EP_NI5_TXCOUNT 0xffc03f68 /* Number of bytes to be written to the H145endpoint5 Tx FIFO */ +#define USB_EP_NI6_TXMAXP 0xffc03f80 /* Maximum packet size for Host Tx endpoint6 */ +#define USB_EP_NI6_TXCSR 0xffc03f84 /* Control Status register for endpoint6 */ +#define USB_EP_NI6_RXMAXP 0xffc03f88 /* Maximum packet size for Host Rx endpoint6 */ +#define USB_EP_NI6_RXCSR 0xffc03f8c /* Control Status register for Host Rx endpoint6 */ +#define USB_EP_NI6_RXCOUNT 0xffc03f90 /* Number of bytes received in endpoint6 FIFO */ +#define USB_EP_NI6_TXTYPE 0xffc03f94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint6 */ +#define USB_EP_NI6_TXINTERVAL 0xffc03f98 /* Sets the NAK response timeout on Endpoint6 */ +#define USB_EP_NI6_RXTYPE 0xffc03f9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint6 */ +#define USB_EP_NI6_RXINTERVAL 0xffc03fa0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint6 */ + +/* USB Endpoint 7 Control Registers */ + +#define USB_EP_NI6_TXCOUNT 0xffc03fa8 /* Number of bytes to be written to the endpoint6 Tx FIFO */ +#define USB_EP_NI7_TXMAXP 0xffc03fc0 /* Maximum packet size for Host Tx endpoint7 */ +#define USB_EP_NI7_TXCSR 0xffc03fc4 /* Control Status register for endpoint7 */ +#define USB_EP_NI7_RXMAXP 0xffc03fc8 /* Maximum packet size for Host Rx endpoint7 */ +#define USB_EP_NI7_RXCSR 0xffc03fcc /* Control Status register for Host Rx endpoint7 */ +#define USB_EP_NI7_RXCOUNT 0xffc03fd0 /* Number of bytes received in endpoint7 FIFO */ +#define USB_EP_NI7_TXTYPE 0xffc03fd4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */ +#define USB_EP_NI7_TXINTERVAL 0xffc03fd8 /* Sets the NAK response timeout on Endpoint7 */ +#define USB_EP_NI7_RXTYPE 0xffc03fdc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */ +#define USB_EP_NI7_RXINTERVAL 0xffc03ff0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */ +#define USB_EP_NI7_TXCOUNT 0xffc03ff8 /* Number of bytes to be written to the endpoint7 Tx FIFO */ +#define USB_DMA_INTERRUPT 0xffc04000 /* Indicates pending interrupts for the DMA channels */ + +/* USB Channel 0 Config Registers */ + +#define USB_DMA0CONTROL 0xffc04004 /* DMA master channel 0 configuration */ +#define USB_DMA0ADDRLOW 0xffc04008 /* Lower 16-bits of memory source/destination address for DMA master channel 0 */ +#define USB_DMA0ADDRHIGH 0xffc0400c /* Upper 16-bits of memory source/destination address for DMA master channel 0 */ +#define USB_DMA0COUNTLOW 0xffc04010 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 0 */ +#define USB_DMA0COUNTHIGH 0xffc04014 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 0 */ + +/* USB Channel 1 Config Registers */ + +#define USB_DMA1CONTROL 0xffc04024 /* DMA master channel 1 configuration */ +#define USB_DMA1ADDRLOW 0xffc04028 /* Lower 16-bits of memory source/destination address for DMA master channel 1 */ +#define USB_DMA1ADDRHIGH 0xffc0402c /* Upper 16-bits of memory source/destination address for DMA master channel 1 */ +#define USB_DMA1COUNTLOW 0xffc04030 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 1 */ +#define USB_DMA1COUNTHIGH 0xffc04034 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 1 */ + +/* USB Channel 2 Config Registers */ + +#define USB_DMA2CONTROL 0xffc04044 /* DMA master channel 2 configuration */ +#define USB_DMA2ADDRLOW 0xffc04048 /* Lower 16-bits of memory source/destination address for DMA master channel 2 */ +#define USB_DMA2ADDRHIGH 0xffc0404c /* Upper 16-bits of memory source/destination address for DMA master channel 2 */ +#define USB_DMA2COUNTLOW 0xffc04050 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 2 */ +#define USB_DMA2COUNTHIGH 0xffc04054 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 2 */ + +/* USB Channel 3 Config Registers */ + +#define USB_DMA3CONTROL 0xffc04064 /* DMA master channel 3 configuration */ +#define USB_DMA3ADDRLOW 0xffc04068 /* Lower 16-bits of memory source/destination address for DMA master channel 3 */ +#define USB_DMA3ADDRHIGH 0xffc0406c /* Upper 16-bits of memory source/destination address for DMA master channel 3 */ +#define USB_DMA3COUNTLOW 0xffc04070 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 3 */ +#define USB_DMA3COUNTHIGH 0xffc04074 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 3 */ + +/* USB Channel 4 Config Registers */ + +#define USB_DMA4CONTROL 0xffc04084 /* DMA master channel 4 configuration */ +#define USB_DMA4ADDRLOW 0xffc04088 /* Lower 16-bits of memory source/destination address for DMA master channel 4 */ +#define USB_DMA4ADDRHIGH 0xffc0408c /* Upper 16-bits of memory source/destination address for DMA master channel 4 */ +#define USB_DMA4COUNTLOW 0xffc04090 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 4 */ +#define USB_DMA4COUNTHIGH 0xffc04094 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 4 */ + +/* USB Channel 5 Config Registers */ + +#define USB_DMA5CONTROL 0xffc040a4 /* DMA master channel 5 configuration */ +#define USB_DMA5ADDRLOW 0xffc040a8 /* Lower 16-bits of memory source/destination address for DMA master channel 5 */ +#define USB_DMA5ADDRHIGH 0xffc040ac /* Upper 16-bits of memory source/destination address for DMA master channel 5 */ +#define USB_DMA5COUNTLOW 0xffc040b0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 5 */ +#define USB_DMA5COUNTHIGH 0xffc040b4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 5 */ + +/* USB Channel 6 Config Registers */ + +#define USB_DMA6CONTROL 0xffc040c4 /* DMA master channel 6 configuration */ +#define USB_DMA6ADDRLOW 0xffc040c8 /* Lower 16-bits of memory source/destination address for DMA master channel 6 */ +#define USB_DMA6ADDRHIGH 0xffc040cc /* Upper 16-bits of memory source/destination address for DMA master channel 6 */ +#define USB_DMA6COUNTLOW 0xffc040d0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 6 */ +#define USB_DMA6COUNTHIGH 0xffc040d4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 6 */ + +/* USB Channel 7 Config Registers */ + +#define USB_DMA7CONTROL 0xffc040e4 /* DMA master channel 7 configuration */ +#define USB_DMA7ADDRLOW 0xffc040e8 /* Lower 16-bits of memory source/destination address for DMA master channel 7 */ +#define USB_DMA7ADDRHIGH 0xffc040ec /* Upper 16-bits of memory source/destination address for DMA master channel 7 */ +#define USB_DMA7COUNTLOW 0xffc040f0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 7 */ +#define USB_DMA7COUNTHIGH 0xffc040f4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 7 */ + +/* Keypad Registers */ + +#define KPAD_CTL 0xffc04100 /* Controls keypad module enable and disable */ +#define KPAD_PRESCALE 0xffc04104 /* Establish a time base for programing the KPAD_MSEL register */ +#define KPAD_MSEL 0xffc04108 /* Selects delay parameters for keypad interface sensitivity */ +#define KPAD_ROWCOL 0xffc0410c /* Captures the row and column output values of the keys pressed */ +#define KPAD_STAT 0xffc04110 /* Holds and clears the status of the keypad interface interrupt */ +#define KPAD_SOFTEVAL 0xffc04114 /* Lets software force keypad interface to check for keys being pressed */ + +/* Pixel Compositor (PIXC) Registers */ + +#define PIXC_CTL 0xffc04400 /* Overlay enable, resampling mode, I/O data format, transparency enable, watermark level, FIFO status */ +#define PIXC_PPL 0xffc04404 /* Holds the number of pixels per line of the display */ +#define PIXC_LPF 0xffc04408 /* Holds the number of lines per frame of the display */ +#define PIXC_AHSTART 0xffc0440c /* Contains horizontal start pixel information of the overlay data (set A) */ +#define PIXC_AHEND 0xffc04410 /* Contains horizontal end pixel information of the overlay data (set A) */ +#define PIXC_AVSTART 0xffc04414 /* Contains vertical start pixel information of the overlay data (set A) */ +#define PIXC_AVEND 0xffc04418 /* Contains vertical end pixel information of the overlay data (set A) */ +#define PIXC_ATRANSP 0xffc0441c /* Contains the transparency ratio (set A) */ +#define PIXC_BHSTART 0xffc04420 /* Contains horizontal start pixel information of the overlay data (set B) */ +#define PIXC_BHEND 0xffc04424 /* Contains horizontal end pixel information of the overlay data (set B) */ +#define PIXC_BVSTART 0xffc04428 /* Contains vertical start pixel information of the overlay data (set B) */ +#define PIXC_BVEND 0xffc0442c /* Contains vertical end pixel information of the overlay data (set B) */ +#define PIXC_BTRANSP 0xffc04430 /* Contains the transparency ratio (set B) */ +#define PIXC_INTRSTAT 0xffc0443c /* Overlay interrupt configuration/status */ +#define PIXC_RYCON 0xffc04440 /* Color space conversion matrix register. Contains the R/Y conversion coefficients */ +#define PIXC_GUCON 0xffc04444 /* Color space conversion matrix register. Contains the G/U conversion coefficients */ +#define PIXC_BVCON 0xffc04448 /* Color space conversion matrix register. Contains the B/V conversion coefficients */ +#define PIXC_CCBIAS 0xffc0444c /* Bias values for the color space conversion matrix */ +#define PIXC_TC 0xffc04450 /* Holds the transparent color value */ + +/* Handshake MDMA 0 Registers */ + +#define HMDMA0_CONTROL 0xffc04500 /* Handshake MDMA0 Control Register */ +#define HMDMA0_ECINIT 0xffc04504 /* Handshake MDMA0 Initial Edge Count Register */ +#define HMDMA0_BCINIT 0xffc04508 /* Handshake MDMA0 Initial Block Count Register */ +#define HMDMA0_ECURGENT 0xffc0450c /* Handshake MDMA0 Urgent Edge Count Threshhold Register */ +#define HMDMA0_ECOVERFLOW 0xffc04510 /* Handshake MDMA0 Edge Count Overflow Interrupt Register */ +#define HMDMA0_ECOUNT 0xffc04514 /* Handshake MDMA0 Current Edge Count Register */ +#define HMDMA0_BCOUNT 0xffc04518 /* Handshake MDMA0 Current Block Count Register */ + +/* Handshake MDMA 1 Registers */ + +#define HMDMA1_CONTROL 0xffc04540 /* Handshake MDMA1 Control Register */ +#define HMDMA1_ECINIT 0xffc04544 /* Handshake MDMA1 Initial Edge Count Register */ +#define HMDMA1_BCINIT 0xffc04548 /* Handshake MDMA1 Initial Block Count Register */ +#define HMDMA1_ECURGENT 0xffc0454c /* Handshake MDMA1 Urgent Edge Count Threshhold Register */ +#define HMDMA1_ECOVERFLOW 0xffc04550 /* Handshake MDMA1 Edge Count Overflow Interrupt Register */ +#define HMDMA1_ECOUNT 0xffc04554 /* Handshake MDMA1 Current Edge Count Register */ +#define HMDMA1_BCOUNT 0xffc04558 /* Handshake MDMA1 Current Block Count Register */ + + +/* ********************************************************** */ +/* SINGLE BIT MACRO PAIRS (bit mask and negated one) */ +/* and MULTI BIT READ MACROS */ +/* ********************************************************** */ + +/* Bit masks for PIXC_CTL */ + +#define PIXC_EN 0x1 /* Pixel Compositor Enable */ +#define nPIXC_EN 0x0 +#define OVR_A_EN 0x2 /* Overlay A Enable */ +#define nOVR_A_EN 0x0 +#define OVR_B_EN 0x4 /* Overlay B Enable */ +#define nOVR_B_EN 0x0 +#define IMG_FORM 0x8 /* Image Data Format */ +#define nIMG_FORM 0x0 +#define OVR_FORM 0x10 /* Overlay Data Format */ +#define nOVR_FORM 0x0 +#define OUT_FORM 0x20 /* Output Data Format */ +#define nOUT_FORM 0x0 +#define UDS_MOD 0x40 /* Resampling Mode */ +#define nUDS_MOD 0x0 +#define TC_EN 0x80 /* Transparent Color Enable */ +#define nTC_EN 0x0 +#define IMG_STAT 0x300 /* Image FIFO Status */ +#define OVR_STAT 0xc00 /* Overlay FIFO Status */ +#define WM_LVL 0x3000 /* FIFO Watermark Level */ + +/* Bit masks for PIXC_AHSTART */ + +#define A_HSTART 0xfff /* Horizontal Start Coordinates */ + +/* Bit masks for PIXC_AHEND */ + +#define A_HEND 0xfff /* Horizontal End Coordinates */ + +/* Bit masks for PIXC_AVSTART */ + +#define A_VSTART 0x3ff /* Vertical Start Coordinates */ + +/* Bit masks for PIXC_AVEND */ + +#define A_VEND 0x3ff /* Vertical End Coordinates */ + +/* Bit masks for PIXC_ATRANSP */ + +#define A_TRANSP 0xf /* Transparency Value */ + +/* Bit masks for PIXC_BHSTART */ + +#define B_HSTART 0xfff /* Horizontal Start Coordinates */ + +/* Bit masks for PIXC_BHEND */ + +#define B_HEND 0xfff /* Horizontal End Coordinates */ + +/* Bit masks for PIXC_BVSTART */ + +#define B_VSTART 0x3ff /* Vertical Start Coordinates */ + +/* Bit masks for PIXC_BVEND */ + +#define B_VEND 0x3ff /* Vertical End Coordinates */ + +/* Bit masks for PIXC_BTRANSP */ + +#define B_TRANSP 0xf /* Transparency Value */ + +/* Bit masks for PIXC_INTRSTAT */ + +#define OVR_INT_EN 0x1 /* Interrupt at End of Last Valid Overlay */ +#define nOVR_INT_EN 0x0 +#define FRM_INT_EN 0x2 /* Interrupt at End of Frame */ +#define nFRM_INT_EN 0x0 +#define OVR_INT_STAT 0x4 /* Overlay Interrupt Status */ +#define nOVR_INT_STAT 0x0 +#define FRM_INT_STAT 0x8 /* Frame Interrupt Status */ +#define nFRM_INT_STAT 0x0 + +/* Bit masks for PIXC_RYCON */ + +#define A11 0x3ff /* A11 in the Coefficient Matrix */ +#define A12 0xffc00 /* A12 in the Coefficient Matrix */ +#define A13 0x3ff00000 /* A13 in the Coefficient Matrix */ +#define RY_MULT4 0x40000000 /* Multiply Row by 4 */ +#define nRY_MULT4 0x0 + +/* Bit masks for PIXC_GUCON */ + +#define A21 0x3ff /* A21 in the Coefficient Matrix */ +#define A22 0xffc00 /* A22 in the Coefficient Matrix */ +#define A23 0x3ff00000 /* A23 in the Coefficient Matrix */ +#define GU_MULT4 0x40000000 /* Multiply Row by 4 */ +#define nGU_MULT4 0x0 + +/* Bit masks for PIXC_BVCON */ + +#define A31 0x3ff /* A31 in the Coefficient Matrix */ +#define A32 0xffc00 /* A32 in the Coefficient Matrix */ +#define A33 0x3ff00000 /* A33 in the Coefficient Matrix */ +#define BV_MULT4 0x40000000 /* Multiply Row by 4 */ +#define nBV_MULT4 0x0 + +/* Bit masks for PIXC_CCBIAS */ + +#define A14 0x3ff /* A14 in the Bias Vector */ +#define A24 0xffc00 /* A24 in the Bias Vector */ +#define A34 0x3ff00000 /* A34 in the Bias Vector */ + +/* Bit masks for PIXC_TC */ + +#define RY_TRANS 0xff /* Transparent Color - R/Y Component */ +#define GU_TRANS 0xff00 /* Transparent Color - G/U Component */ +#define BV_TRANS 0xff0000 /* Transparent Color - B/V Component */ + +/* Bit masks for HOST_CONTROL */ + +#define HOST_EN 0x1 /* Host Enable */ +#define nHOST_EN 0x0 +#define HOST_END 0x2 /* Host Endianess */ +#define nHOST_END 0x0 +#define DATA_SIZE 0x4 /* Data Size */ +#define nDATA_SIZE 0x0 +#define HOST_RST 0x8 /* Host Reset */ +#define nHOST_RST 0x0 +#define HRDY_OVR 0x20 /* Host Ready Override */ +#define nHRDY_OVR 0x0 +#define INT_MODE 0x40 /* Interrupt Mode */ +#define nINT_MODE 0x0 +#define BT_EN 0x80 /* Bus Timeout Enable */ +#define nBT_EN 0x0 +#define EHW 0x100 /* Enable Host Write */ +#define nEHW 0x0 +#define EHR 0x200 /* Enable Host Read */ +#define nEHR 0x0 +#define BDR 0x400 /* Burst DMA Requests */ +#define nBDR 0x0 + +/* Bit masks for HOST_STATUS */ + +#define READY 0x1 /* DMA Ready */ +#define nREADY 0x0 +#define FIFOFULL 0x2 /* FIFO Full */ +#define nFIFOFULL 0x0 +#define FIFOEMPTY 0x4 /* FIFO Empty */ +#define nFIFOEMPTY 0x0 +#define COMPLETE 0x8 /* DMA Complete */ +#define nCOMPLETE 0x0 +#define HSHK 0x10 /* Host Handshake */ +#define nHSHK 0x0 +#define TIMEOUT 0x20 /* Host Timeout */ +#define nTIMEOUT 0x0 +#define HIRQ 0x40 /* Host Interrupt Request */ +#define nHIRQ 0x0 +#define ALLOW_CNFG 0x80 /* Allow New Configuration */ +#define nALLOW_CNFG 0x0 +#define DMA_DIR 0x100 /* DMA Direction */ +#define nDMA_DIR 0x0 +#define BTE 0x200 /* Bus Timeout Enabled */ +#define nBTE 0x0 + +/* Bit masks for HOST_TIMEOUT */ + +#define COUNT_TIMEOUT 0x7ff /* Host Timeout count */ + +/* Bit masks for MXVR_CONFIG */ + +#define MXVREN 0x1 /* MXVR Enable */ +#define nMXVREN 0x0 +#define MMSM 0x2 /* MXVR Master/Slave Mode Select */ +#define nMMSM 0x0 +#define ACTIVE 0x4 /* Active Mode */ +#define nACTIVE 0x0 +#define SDELAY 0x8 /* Synchronous Data Delay */ +#define nSDELAY 0x0 +#define NCMRXEN 0x10 /* Normal Control Message Receive Enable */ +#define nNCMRXEN 0x0 +#define RWRRXEN 0x20 /* Remote Write Receive Enable */ +#define nRWRRXEN 0x0 +#define MTXEN 0x40 /* MXVR Transmit Data Enable */ +#define nMTXEN 0x0 +#define MTXONB 0x80 /* MXVR Phy Transmitter On */ +#define nMTXONB 0x0 +#define EPARITY 0x100 /* Even Parity Select */ +#define nEPARITY 0x0 +#define MSB 0x1e00 /* Master Synchronous Boundary */ +#define APRXEN 0x2000 /* Asynchronous Packet Receive Enable */ +#define nAPRXEN 0x0 +#define WAKEUP 0x4000 /* Wake-Up */ +#define nWAKEUP 0x0 +#define LMECH 0x8000 /* Lock Mechanism Select */ +#define nLMECH 0x0 + +/* Bit masks for MXVR_STATE_0 */ + +#define NACT 0x1 /* Network Activity */ +#define nNACT 0x0 +#define SBLOCK 0x2 /* Super Block Lock */ +#define nSBLOCK 0x0 +#define FMPLLST 0xc /* Frequency Multiply PLL SM State */ +#define CDRPLLST 0xe0 /* Clock/Data Recovery PLL SM State */ +#define APBSY 0x100 /* Asynchronous Packet Transmit Buffer Busy */ +#define nAPBSY 0x0 +#define APARB 0x200 /* Asynchronous Packet Arbitrating */ +#define nAPARB 0x0 +#define APTX 0x400 /* Asynchronous Packet Transmitting */ +#define nAPTX 0x0 +#define APRX 0x800 /* Receiving Asynchronous Packet */ +#define nAPRX 0x0 +#define CMBSY 0x1000 /* Control Message Transmit Buffer Busy */ +#define nCMBSY 0x0 +#define CMARB 0x2000 /* Control Message Arbitrating */ +#define nCMARB 0x0 +#define CMTX 0x4000 /* Control Message Transmitting */ +#define nCMTX 0x0 +#define CMRX 0x8000 /* Receiving Control Message */ +#define nCMRX 0x0 +#define MRXONB 0x10000 /* MRXONB Pin State */ +#define nMRXONB 0x0 +#define RGSIP 0x20000 /* Remote Get Source In Progress */ +#define nRGSIP 0x0 +#define DALIP 0x40000 /* Resource Deallocate In Progress */ +#define nDALIP 0x0 +#define ALIP 0x80000 /* Resource Allocate In Progress */ +#define nALIP 0x0 +#define RRDIP 0x100000 /* Remote Read In Progress */ +#define nRRDIP 0x0 +#define RWRIP 0x200000 /* Remote Write In Progress */ +#define nRWRIP 0x0 +#define FLOCK 0x400000 /* Frame Lock */ +#define nFLOCK 0x0 +#define BLOCK 0x800000 /* Block Lock */ +#define nBLOCK 0x0 +#define RSB 0xf000000 /* Received Synchronous Boundary */ +#define DERRNUM 0xf0000000 /* DMA Error Channel Number */ + +/* Bit masks for MXVR_STATE_1 */ + +#define SRXNUMB 0xf /* Synchronous Receive FIFO Number of Bytes */ +#define STXNUMB 0xf0 /* Synchronous Transmit FIFO Number of Bytes */ +#define APCONT 0x100 /* Asynchronous Packet Continuation */ +#define nAPCONT 0x0 +#define OBERRNUM 0xe00 /* DMA Out of Bounds Error Channel Number */ +#define DMAACTIVE0 0x10000 /* DMA0 Active */ +#define nDMAACTIVE0 0x0 +#define DMAACTIVE1 0x20000 /* DMA1 Active */ +#define nDMAACTIVE1 0x0 +#define DMAACTIVE2 0x40000 /* DMA2 Active */ +#define nDMAACTIVE2 0x0 +#define DMAACTIVE3 0x80000 /* DMA3 Active */ +#define nDMAACTIVE3 0x0 +#define DMAACTIVE4 0x100000 /* DMA4 Active */ +#define nDMAACTIVE4 0x0 +#define DMAACTIVE5 0x200000 /* DMA5 Active */ +#define nDMAACTIVE5 0x0 +#define DMAACTIVE6 0x400000 /* DMA6 Active */ +#define nDMAACTIVE6 0x0 +#define DMAACTIVE7 0x800000 /* DMA7 Active */ +#define nDMAACTIVE7 0x0 +#define DMAPMEN0 0x1000000 /* DMA0 Pattern Matching Enabled */ +#define nDMAPMEN0 0x0 +#define DMAPMEN1 0x2000000 /* DMA1 Pattern Matching Enabled */ +#define nDMAPMEN1 0x0 +#define DMAPMEN2 0x4000000 /* DMA2 Pattern Matching Enabled */ +#define nDMAPMEN2 0x0 +#define DMAPMEN3 0x8000000 /* DMA3 Pattern Matching Enabled */ +#define nDMAPMEN3 0x0 +#define DMAPMEN4 0x10000000 /* DMA4 Pattern Matching Enabled */ +#define nDMAPMEN4 0x0 +#define DMAPMEN5 0x20000000 /* DMA5 Pattern Matching Enabled */ +#define nDMAPMEN5 0x0 +#define DMAPMEN6 0x40000000 /* DMA6 Pattern Matching Enabled */ +#define nDMAPMEN6 0x0 +#define DMAPMEN7 0x80000000 /* DMA7 Pattern Matching Enabled */ +#define nDMAPMEN7 0x0 + +/* Bit masks for MXVR_INT_STAT_0 */ + +#define NI2A 0x1 /* Network Inactive to Active */ +#define nNI2A 0x0 +#define NA2I 0x2 /* Network Active to Inactive */ +#define nNA2I 0x0 +#define SBU2L 0x4 /* Super Block Unlock to Lock */ +#define nSBU2L 0x0 +#define SBL2U 0x8 /* Super Block Lock to Unlock */ +#define nSBL2U 0x0 +#define PRU 0x10 /* Position Register Updated */ +#define nPRU 0x0 +#define MPRU 0x20 /* Maximum Position Register Updated */ +#define nMPRU 0x0 +#define DRU 0x40 /* Delay Register Updated */ +#define nDRU 0x0 +#define MDRU 0x80 /* Maximum Delay Register Updated */ +#define nMDRU 0x0 +#define SBU 0x100 /* Synchronous Boundary Updated */ +#define nSBU 0x0 +#define ATU 0x200 /* Allocation Table Updated */ +#define nATU 0x0 +#define FCZ0 0x400 /* Frame Counter 0 Zero */ +#define nFCZ0 0x0 +#define FCZ1 0x800 /* Frame Counter 1 Zero */ +#define nFCZ1 0x0 +#define PERR 0x1000 /* Parity Error */ +#define nPERR 0x0 +#define MH2L 0x2000 /* MRXONB High to Low */ +#define nMH2L 0x0 +#define ML2H 0x4000 /* MRXONB Low to High */ +#define nML2H 0x0 +#define WUP 0x8000 /* Wake-Up Preamble Received */ +#define nWUP 0x0 +#define FU2L 0x10000 /* Frame Unlock to Lock */ +#define nFU2L 0x0 +#define FL2U 0x20000 /* Frame Lock to Unlock */ +#define nFL2U 0x0 +#define BU2L 0x40000 /* Block Unlock to Lock */ +#define nBU2L 0x0 +#define BL2U 0x80000 /* Block Lock to Unlock */ +#define nBL2U 0x0 +#define OBERR 0x100000 /* DMA Out of Bounds Error */ +#define nOBERR 0x0 +#define PFL 0x200000 /* PLL Frequency Locked */ +#define nPFL 0x0 +#define SCZ 0x400000 /* System Clock Counter Zero */ +#define nSCZ 0x0 +#define FERR 0x800000 /* FIFO Error */ +#define nFERR 0x0 +#define CMR 0x1000000 /* Control Message Received */ +#define nCMR 0x0 +#define CMROF 0x2000000 /* Control Message Receive Buffer Overflow */ +#define nCMROF 0x0 +#define CMTS 0x4000000 /* Control Message Transmit Buffer Successfully Sent */ +#define nCMTS 0x0 +#define CMTC 0x8000000 /* Control Message Transmit Buffer Successfully Cancelled */ +#define nCMTC 0x0 +#define RWRC 0x10000000 /* Remote Write Control Message Completed */ +#define nRWRC 0x0 +#define BCZ 0x20000000 /* Block Counter Zero */ +#define nBCZ 0x0 +#define BMERR 0x40000000 /* Biphase Mark Coding Error */ +#define nBMERR 0x0 +#define DERR 0x80000000 /* DMA Error */ +#define nDERR 0x0 + +/* Bit masks for MXVR_INT_STAT_1 */ + +#define HDONE0 0x1 /* DMA0 Half Done */ +#define nHDONE0 0x0 +#define DONE0 0x2 /* DMA0 Done */ +#define nDONE0 0x0 +#define APR 0x4 /* Asynchronous Packet Received */ +#define nAPR 0x0 +#define APROF 0x8 /* Asynchronous Packet Receive Buffer Overflow */ +#define nAPROF 0x0 +#define HDONE1 0x10 /* DMA1 Half Done */ +#define nHDONE1 0x0 +#define DONE1 0x20 /* DMA1 Done */ +#define nDONE1 0x0 +#define APTS 0x40 /* Asynchronous Packet Transmit Buffer Successfully Sent */ +#define nAPTS 0x0 +#define APTC 0x80 /* Asynchronous Packet Transmit Buffer Successfully Cancelled */ +#define nAPTC 0x0 +#define HDONE2 0x100 /* DMA2 Half Done */ +#define nHDONE2 0x0 +#define DONE2 0x200 /* DMA2 Done */ +#define nDONE2 0x0 +#define APRCE 0x400 /* Asynchronous Packet Receive CRC Error */ +#define nAPRCE 0x0 +#define APRPE 0x800 /* Asynchronous Packet Receive Packet Error */ +#define nAPRPE 0x0 +#define HDONE3 0x1000 /* DMA3 Half Done */ +#define nHDONE3 0x0 +#define DONE3 0x2000 /* DMA3 Done */ +#define nDONE3 0x0 +#define HDONE4 0x10000 /* DMA4 Half Done */ +#define nHDONE4 0x0 +#define DONE4 0x20000 /* DMA4 Done */ +#define nDONE4 0x0 +#define HDONE5 0x100000 /* DMA5 Half Done */ +#define nHDONE5 0x0 +#define DONE5 0x200000 /* DMA5 Done */ +#define nDONE5 0x0 +#define HDONE6 0x1000000 /* DMA6 Half Done */ +#define nHDONE6 0x0 +#define DONE6 0x2000000 /* DMA6 Done */ +#define nDONE6 0x0 +#define HDONE7 0x10000000 /* DMA7 Half Done */ +#define nHDONE7 0x0 +#define DONE7 0x20000000 /* DMA7 Done */ +#define nDONE7 0x0 + +/* Bit masks for MXVR_INT_EN_0 */ + +#define NI2AEN 0x1 /* Network Inactive to Active Interrupt Enable */ +#define nNI2AEN 0x0 +#define NA2IEN 0x2 /* Network Active to Inactive Interrupt Enable */ +#define nNA2IEN 0x0 +#define SBU2LEN 0x4 /* Super Block Unlock to Lock Interrupt Enable */ +#define nSBU2LEN 0x0 +#define SBL2UEN 0x8 /* Super Block Lock to Unlock Interrupt Enable */ +#define nSBL2UEN 0x0 +#define PRUEN 0x10 /* Position Register Updated Interrupt Enable */ +#define nPRUEN 0x0 +#define MPRUEN 0x20 /* Maximum Position Register Updated Interrupt Enable */ +#define nMPRUEN 0x0 +#define DRUEN 0x40 /* Delay Register Updated Interrupt Enable */ +#define nDRUEN 0x0 +#define MDRUEN 0x80 /* Maximum Delay Register Updated Interrupt Enable */ +#define nMDRUEN 0x0 +#define SBUEN 0x100 /* Synchronous Boundary Updated Interrupt Enable */ +#define nSBUEN 0x0 +#define ATUEN 0x200 /* Allocation Table Updated Interrupt Enable */ +#define nATUEN 0x0 +#define FCZ0EN 0x400 /* Frame Counter 0 Zero Interrupt Enable */ +#define nFCZ0EN 0x0 +#define FCZ1EN 0x800 /* Frame Counter 1 Zero Interrupt Enable */ +#define nFCZ1EN 0x0 +#define PERREN 0x1000 /* Parity Error Interrupt Enable */ +#define nPERREN 0x0 +#define MH2LEN 0x2000 /* MRXONB High to Low Interrupt Enable */ +#define nMH2LEN 0x0 +#define ML2HEN 0x4000 /* MRXONB Low to High Interrupt Enable */ +#define nML2HEN 0x0 +#define WUPEN 0x8000 /* Wake-Up Preamble Received Interrupt Enable */ +#define nWUPEN 0x0 +#define FU2LEN 0x10000 /* Frame Unlock to Lock Interrupt Enable */ +#define nFU2LEN 0x0 +#define FL2UEN 0x20000 /* Frame Lock to Unlock Interrupt Enable */ +#define nFL2UEN 0x0 +#define BU2LEN 0x40000 /* Block Unlock to Lock Interrupt Enable */ +#define nBU2LEN 0x0 +#define BL2UEN 0x80000 /* Block Lock to Unlock Interrupt Enable */ +#define nBL2UEN 0x0 +#define OBERREN 0x100000 /* DMA Out of Bounds Error Interrupt Enable */ +#define nOBERREN 0x0 +#define PFLEN 0x200000 /* PLL Frequency Locked Interrupt Enable */ +#define nPFLEN 0x0 +#define SCZEN 0x400000 /* System Clock Counter Zero Interrupt Enable */ +#define nSCZEN 0x0 +#define FERREN 0x800000 /* FIFO Error Interrupt Enable */ +#define nFERREN 0x0 +#define CMREN 0x1000000 /* Control Message Received Interrupt Enable */ +#define nCMREN 0x0 +#define CMROFEN 0x2000000 /* Control Message Receive Buffer Overflow Interrupt Enable */ +#define nCMROFEN 0x0 +#define CMTSEN 0x4000000 /* Control Message Transmit Buffer Successfully Sent Interrupt Enable */ +#define nCMTSEN 0x0 +#define CMTCEN 0x8000000 /* Control Message Transmit Buffer Successfully Cancelled Interrupt Enable */ +#define nCMTCEN 0x0 +#define RWRCEN 0x10000000 /* Remote Write Control Message Completed Interrupt Enable */ +#define nRWRCEN 0x0 +#define BCZEN 0x20000000 /* Block Counter Zero Interrupt Enable */ +#define nBCZEN 0x0 +#define BMERREN 0x40000000 /* Biphase Mark Coding Error Interrupt Enable */ +#define nBMERREN 0x0 +#define DERREN 0x80000000 /* DMA Error Interrupt Enable */ +#define nDERREN 0x0 + +/* Bit masks for MXVR_INT_EN_1 */ + +#define HDONEEN0 0x1 /* DMA0 Half Done Interrupt Enable */ +#define nHDONEEN0 0x0 +#define DONEEN0 0x2 /* DMA0 Done Interrupt Enable */ +#define nDONEEN0 0x0 +#define APREN 0x4 /* Asynchronous Packet Received Interrupt Enable */ +#define nAPREN 0x0 +#define APROFEN 0x8 /* Asynchronous Packet Receive Buffer Overflow Interrupt Enable */ +#define nAPROFEN 0x0 +#define HDONEEN1 0x10 /* DMA1 Half Done Interrupt Enable */ +#define nHDONEEN1 0x0 +#define DONEEN1 0x20 /* DMA1 Done Interrupt Enable */ +#define nDONEEN1 0x0 +#define APTSEN 0x40 /* Asynchronous Packet Transmit Buffer Successfully Sent Interrupt Enable */ +#define nAPTSEN 0x0 +#define APTCEN 0x80 /* Asynchronous Packet Transmit Buffer Successfully Cancelled Interrupt Enable */ +#define nAPTCEN 0x0 +#define HDONEEN2 0x100 /* DMA2 Half Done Interrupt Enable */ +#define nHDONEEN2 0x0 +#define DONEEN2 0x200 /* DMA2 Done Interrupt Enable */ +#define nDONEEN2 0x0 +#define APRCEEN 0x400 /* Asynchronous Packet Receive CRC Error Interrupt Enable */ +#define nAPRCEEN 0x0 +#define APRPEEN 0x800 /* Asynchronous Packet Receive Packet Error Interrupt Enable */ +#define nAPRPEEN 0x0 +#define HDONEEN3 0x1000 /* DMA3 Half Done Interrupt Enable */ +#define nHDONEEN3 0x0 +#define DONEEN3 0x2000 /* DMA3 Done Interrupt Enable */ +#define nDONEEN3 0x0 +#define HDONEEN4 0x10000 /* DMA4 Half Done Interrupt Enable */ +#define nHDONEEN4 0x0 +#define DONEEN4 0x20000 /* DMA4 Done Interrupt Enable */ +#define nDONEEN4 0x0 +#define HDONEEN5 0x100000 /* DMA5 Half Done Interrupt Enable */ +#define nHDONEEN5 0x0 +#define DONEEN5 0x200000 /* DMA5 Done Interrupt Enable */ +#define nDONEEN5 0x0 +#define HDONEEN6 0x1000000 /* DMA6 Half Done Interrupt Enable */ +#define nHDONEEN6 0x0 +#define DONEEN6 0x2000000 /* DMA6 Done Interrupt Enable */ +#define nDONEEN6 0x0 +#define HDONEEN7 0x10000000 /* DMA7 Half Done Interrupt Enable */ +#define nHDONEEN7 0x0 +#define DONEEN7 0x20000000 /* DMA7 Done Interrupt Enable */ +#define nDONEEN7 0x0 + +/* Bit masks for MXVR_POSITION */ + +#define POSITION 0x3f /* Node Position */ +#define PVALID 0x8000 /* Node Position Valid */ +#define nPVALID 0x0 + +/* Bit masks for MXVR_MAX_POSITION */ + +#define MPOSITION 0x3f /* Maximum Node Position */ +#define MPVALID 0x8000 /* Maximum Node Position Valid */ +#define nMPVALID 0x0 + +/* Bit masks for MXVR_DELAY */ + +#define DELAY 0x3f /* Node Frame Delay */ +#define DVALID 0x8000 /* Node Frame Delay Valid */ +#define nDVALID 0x0 + +/* Bit masks for MXVR_MAX_DELAY */ + +#define MDELAY 0x3f /* Maximum Node Frame Delay */ +#define MDVALID 0x8000 /* Maximum Node Frame Delay Valid */ +#define nMDVALID 0x0 + +/* Bit masks for MXVR_LADDR */ + +#define LADDR 0xffff /* Logical Address */ +#define LVALID 0x80000000 /* Logical Address Valid */ +#define nLVALID 0x0 + +/* Bit masks for MXVR_GADDR */ + +#define GADDRL 0xff /* Group Address Lower Byte */ +#define GVALID 0x8000 /* Group Address Valid */ +#define nGVALID 0x0 + +/* Bit masks for MXVR_AADDR */ + +#define AADDR 0xffff /* Alternate Address */ +#define AVALID 0x80000000 /* Alternate Address Valid */ +#define nAVALID 0x0 + +/* Bit masks for MXVR_ALLOC_0 */ + +#define CL0 0x7f /* Channel 0 Connection Label */ +#define CIU0 0x80 /* Channel 0 In Use */ +#define nCIU0 0x0 +#define CL1 0x7f00 /* Channel 0 Connection Label */ +#define CIU1 0x8000 /* Channel 0 In Use */ +#define nCIU1 0x0 +#define CL2 0x7f0000 /* Channel 0 Connection Label */ +#define CIU2 0x800000 /* Channel 0 In Use */ +#define nCIU2 0x0 +#define CL3 0x7f000000 /* Channel 0 Connection Label */ +#define CIU3 0x80000000 /* Channel 0 In Use */ +#define nCIU3 0x0 + +/* Bit masks for MXVR_ALLOC_1 */ + +#define CL4 0x7f /* Channel 4 Connection Label */ +#define CIU4 0x80 /* Channel 4 In Use */ +#define nCIU4 0x0 +#define CL5 0x7f00 /* Channel 5 Connection Label */ +#define CIU5 0x8000 /* Channel 5 In Use */ +#define nCIU5 0x0 +#define CL6 0x7f0000 /* Channel 6 Connection Label */ +#define CIU6 0x800000 /* Channel 6 In Use */ +#define nCIU6 0x0 +#define CL7 0x7f000000 /* Channel 7 Connection Label */ +#define CIU7 0x80000000 /* Channel 7 In Use */ +#define nCIU7 0x0 + +/* Bit masks for MXVR_ALLOC_2 */ + +#define CL8 0x7f /* Channel 8 Connection Label */ +#define CIU8 0x80 /* Channel 8 In Use */ +#define nCIU8 0x0 +#define CL9 0x7f00 /* Channel 9 Connection Label */ +#define CIU9 0x8000 /* Channel 9 In Use */ +#define nCIU9 0x0 +#define CL10 0x7f0000 /* Channel 10 Connection Label */ +#define CIU10 0x800000 /* Channel 10 In Use */ +#define nCIU10 0x0 +#define CL11 0x7f000000 /* Channel 11 Connection Label */ +#define CIU11 0x80000000 /* Channel 11 In Use */ +#define nCIU11 0x0 + +/* Bit masks for MXVR_ALLOC_3 */ + +#define CL12 0x7f /* Channel 12 Connection Label */ +#define CIU12 0x80 /* Channel 12 In Use */ +#define nCIU12 0x0 +#define CL13 0x7f00 /* Channel 13 Connection Label */ +#define CIU13 0x8000 /* Channel 13 In Use */ +#define nCIU13 0x0 +#define CL14 0x7f0000 /* Channel 14 Connection Label */ +#define CIU14 0x800000 /* Channel 14 In Use */ +#define nCIU14 0x0 +#define CL15 0x7f000000 /* Channel 15 Connection Label */ +#define CIU15 0x80000000 /* Channel 15 In Use */ +#define nCIU15 0x0 + +/* Bit masks for MXVR_ALLOC_4 */ + +#define CL16 0x7f /* Channel 16 Connection Label */ +#define CIU16 0x80 /* Channel 16 In Use */ +#define nCIU16 0x0 +#define CL17 0x7f00 /* Channel 17 Connection Label */ +#define CIU17 0x8000 /* Channel 17 In Use */ +#define nCIU17 0x0 +#define CL18 0x7f0000 /* Channel 18 Connection Label */ +#define CIU18 0x800000 /* Channel 18 In Use */ +#define nCIU18 0x0 +#define CL19 0x7f000000 /* Channel 19 Connection Label */ +#define CIU19 0x80000000 /* Channel 19 In Use */ +#define nCIU19 0x0 + +/* Bit masks for MXVR_ALLOC_5 */ + +#define CL20 0x7f /* Channel 20 Connection Label */ +#define CIU20 0x80 /* Channel 20 In Use */ +#define nCIU20 0x0 +#define CL21 0x7f00 /* Channel 21 Connection Label */ +#define CIU21 0x8000 /* Channel 21 In Use */ +#define nCIU21 0x0 +#define CL22 0x7f0000 /* Channel 22 Connection Label */ +#define CIU22 0x800000 /* Channel 22 In Use */ +#define nCIU22 0x0 +#define CL23 0x7f000000 /* Channel 23 Connection Label */ +#define CIU23 0x80000000 /* Channel 23 In Use */ +#define nCIU23 0x0 + +/* Bit masks for MXVR_ALLOC_6 */ + +#define CL24 0x7f /* Channel 24 Connection Label */ +#define CIU24 0x80 /* Channel 24 In Use */ +#define nCIU24 0x0 +#define CL25 0x7f00 /* Channel 25 Connection Label */ +#define CIU25 0x8000 /* Channel 25 In Use */ +#define nCIU25 0x0 +#define CL26 0x7f0000 /* Channel 26 Connection Label */ +#define CIU26 0x800000 /* Channel 26 In Use */ +#define nCIU26 0x0 +#define CL27 0x7f000000 /* Channel 27 Connection Label */ +#define CIU27 0x80000000 /* Channel 27 In Use */ +#define nCIU27 0x0 + +/* Bit masks for MXVR_ALLOC_7 */ + +#define CL28 0x7f /* Channel 28 Connection Label */ +#define CIU28 0x80 /* Channel 28 In Use */ +#define nCIU28 0x0 +#define CL29 0x7f00 /* Channel 29 Connection Label */ +#define CIU29 0x8000 /* Channel 29 In Use */ +#define nCIU29 0x0 +#define CL30 0x7f0000 /* Channel 30 Connection Label */ +#define CIU30 0x800000 /* Channel 30 In Use */ +#define nCIU30 0x0 +#define CL31 0x7f000000 /* Channel 31 Connection Label */ +#define CIU31 0x80000000 /* Channel 31 In Use */ +#define nCIU31 0x0 + +/* Bit masks for MXVR_ALLOC_8 */ + +#define CL32 0x7f /* Channel 32 Connection Label */ +#define CIU32 0x80 /* Channel 32 In Use */ +#define nCIU32 0x0 +#define CL33 0x7f00 /* Channel 33 Connection Label */ +#define CIU33 0x8000 /* Channel 33 In Use */ +#define nCIU33 0x0 +#define CL34 0x7f0000 /* Channel 34 Connection Label */ +#define CIU34 0x800000 /* Channel 34 In Use */ +#define nCIU34 0x0 +#define CL35 0x7f000000 /* Channel 35 Connection Label */ +#define CIU35 0x80000000 /* Channel 35 In Use */ +#define nCIU35 0x0 + +/* Bit masks for MXVR_ALLOC_9 */ + +#define CL36 0x7f /* Channel 36 Connection Label */ +#define CIU36 0x80 /* Channel 36 In Use */ +#define nCIU36 0x0 +#define CL37 0x7f00 /* Channel 37 Connection Label */ +#define CIU37 0x8000 /* Channel 37 In Use */ +#define nCIU37 0x0 +#define CL38 0x7f0000 /* Channel 38 Connection Label */ +#define CIU38 0x800000 /* Channel 38 In Use */ +#define nCIU38 0x0 +#define CL39 0x7f000000 /* Channel 39 Connection Label */ +#define CIU39 0x80000000 /* Channel 39 In Use */ +#define nCIU39 0x0 + +/* Bit masks for MXVR_ALLOC_10 */ + +#define CL40 0x7f /* Channel 40 Connection Label */ +#define CIU40 0x80 /* Channel 40 In Use */ +#define nCIU40 0x0 +#define CL41 0x7f00 /* Channel 41 Connection Label */ +#define CIU41 0x8000 /* Channel 41 In Use */ +#define nCIU41 0x0 +#define CL42 0x7f0000 /* Channel 42 Connection Label */ +#define CIU42 0x800000 /* Channel 42 In Use */ +#define nCIU42 0x0 +#define CL43 0x7f000000 /* Channel 43 Connection Label */ +#define CIU43 0x80000000 /* Channel 43 In Use */ +#define nCIU43 0x0 + +/* Bit masks for MXVR_ALLOC_11 */ + +#define CL44 0x7f /* Channel 44 Connection Label */ +#define CIU44 0x80 /* Channel 44 In Use */ +#define nCIU44 0x0 +#define CL45 0x7f00 /* Channel 45 Connection Label */ +#define CIU45 0x8000 /* Channel 45 In Use */ +#define nCIU45 0x0 +#define CL46 0x7f0000 /* Channel 46 Connection Label */ +#define CIU46 0x800000 /* Channel 46 In Use */ +#define nCIU46 0x0 +#define CL47 0x7f000000 /* Channel 47 Connection Label */ +#define CIU47 0x80000000 /* Channel 47 In Use */ +#define nCIU47 0x0 + +/* Bit masks for MXVR_ALLOC_12 */ + +#define CL48 0x7f /* Channel 48 Connection Label */ +#define CIU48 0x80 /* Channel 48 In Use */ +#define nCIU48 0x0 +#define CL49 0x7f00 /* Channel 49 Connection Label */ +#define CIU49 0x8000 /* Channel 49 In Use */ +#define nCIU49 0x0 +#define CL50 0x7f0000 /* Channel 50 Connection Label */ +#define CIU50 0x800000 /* Channel 50 In Use */ +#define nCIU50 0x0 +#define CL51 0x7f000000 /* Channel 51 Connection Label */ +#define CIU51 0x80000000 /* Channel 51 In Use */ +#define nCIU51 0x0 + +/* Bit masks for MXVR_ALLOC_13 */ + +#define CL52 0x7f /* Channel 52 Connection Label */ +#define CIU52 0x80 /* Channel 52 In Use */ +#define nCIU52 0x0 +#define CL53 0x7f00 /* Channel 53 Connection Label */ +#define CIU53 0x8000 /* Channel 53 In Use */ +#define nCIU53 0x0 +#define CL54 0x7f0000 /* Channel 54 Connection Label */ +#define CIU54 0x800000 /* Channel 54 In Use */ +#define nCIU54 0x0 +#define CL55 0x7f000000 /* Channel 55 Connection Label */ +#define CIU55 0x80000000 /* Channel 55 In Use */ +#define nCIU55 0x0 + +/* Bit masks for MXVR_ALLOC_14 */ + +#define CL56 0x7f /* Channel 56 Connection Label */ +#define CIU56 0x80 /* Channel 56 In Use */ +#define nCIU56 0x0 +#define CL57 0x7f00 /* Channel 57 Connection Label */ +#define CIU57 0x8000 /* Channel 57 In Use */ +#define nCIU57 0x0 +#define CL58 0x7f0000 /* Channel 58 Connection Label */ +#define CIU58 0x800000 /* Channel 58 In Use */ +#define nCIU58 0x0 +#define CL59 0x7f000000 /* Channel 59 Connection Label */ +#define CIU59 0x80000000 /* Channel 59 In Use */ +#define nCIU59 0x0 + +/* MXVR_SYNC_LCHAN_0 Masks */ + +#define LCHANPC0 0x0000000Flu +#define LCHANPC1 0x000000F0lu +#define LCHANPC2 0x00000F00lu +#define LCHANPC3 0x0000F000lu +#define LCHANPC4 0x000F0000lu +#define LCHANPC5 0x00F00000lu +#define LCHANPC6 0x0F000000lu +#define LCHANPC7 0xF0000000lu + + +/* MXVR_SYNC_LCHAN_1 Masks */ + +#define LCHANPC8 0x0000000Flu +#define LCHANPC9 0x000000F0lu +#define LCHANPC10 0x00000F00lu +#define LCHANPC11 0x0000F000lu +#define LCHANPC12 0x000F0000lu +#define LCHANPC13 0x00F00000lu +#define LCHANPC14 0x0F000000lu +#define LCHANPC15 0xF0000000lu + + +/* MXVR_SYNC_LCHAN_2 Masks */ + +#define LCHANPC16 0x0000000Flu +#define LCHANPC17 0x000000F0lu +#define LCHANPC18 0x00000F00lu +#define LCHANPC19 0x0000F000lu +#define LCHANPC20 0x000F0000lu +#define LCHANPC21 0x00F00000lu +#define LCHANPC22 0x0F000000lu +#define LCHANPC23 0xF0000000lu + + +/* MXVR_SYNC_LCHAN_3 Masks */ + +#define LCHANPC24 0x0000000Flu +#define LCHANPC25 0x000000F0lu +#define LCHANPC26 0x00000F00lu +#define LCHANPC27 0x0000F000lu +#define LCHANPC28 0x000F0000lu +#define LCHANPC29 0x00F00000lu +#define LCHANPC30 0x0F000000lu +#define LCHANPC31 0xF0000000lu + + +/* MXVR_SYNC_LCHAN_4 Masks */ + +#define LCHANPC32 0x0000000Flu +#define LCHANPC33 0x000000F0lu +#define LCHANPC34 0x00000F00lu +#define LCHANPC35 0x0000F000lu +#define LCHANPC36 0x000F0000lu +#define LCHANPC37 0x00F00000lu +#define LCHANPC38 0x0F000000lu +#define LCHANPC39 0xF0000000lu + + +/* MXVR_SYNC_LCHAN_5 Masks */ + +#define LCHANPC40 0x0000000Flu +#define LCHANPC41 0x000000F0lu +#define LCHANPC42 0x00000F00lu +#define LCHANPC43 0x0000F000lu +#define LCHANPC44 0x000F0000lu +#define LCHANPC45 0x00F00000lu +#define LCHANPC46 0x0F000000lu +#define LCHANPC47 0xF0000000lu + + +/* MXVR_SYNC_LCHAN_6 Masks */ + +#define LCHANPC48 0x0000000Flu +#define LCHANPC49 0x000000F0lu +#define LCHANPC50 0x00000F00lu +#define LCHANPC51 0x0000F000lu +#define LCHANPC52 0x000F0000lu +#define LCHANPC53 0x00F00000lu +#define LCHANPC54 0x0F000000lu +#define LCHANPC55 0xF0000000lu + + +/* MXVR_SYNC_LCHAN_7 Masks */ + +#define LCHANPC56 0x0000000Flu +#define LCHANPC57 0x000000F0lu +#define LCHANPC58 0x00000F00lu +#define LCHANPC59 0x0000F000lu + +/* Bit masks for MXVR_DMAx_CONFIG */ + +#define MDMAEN 0x1 /* DMA Channel Enable */ +#define nMDMAEN 0x0 +#define DD 0x2 /* DMA Channel Direction */ +#define nDD 0x0 +#define BY4SWAPEN 0x20 /* DMA Channel Four Byte Swap Enable */ +#define nBY4SWAPEN 0x0 +#define LCHAN 0x3c0 /* DMA Channel Logical Channel */ +#define BITSWAPEN 0x400 /* DMA Channel Bit Swap Enable */ +#define nBITSWAPEN 0x0 +#define BY2SWAPEN 0x800 /* DMA Channel Two Byte Swap Enable */ +#define nBY2SWAPEN 0x0 +#define MFLOW 0x7000 /* DMA Channel Operation Flow */ +#define FIXEDPM 0x80000 /* DMA Channel Fixed Pattern Matching Select */ +#define nFIXEDPM 0x0 +#define STARTPAT 0x300000 /* DMA Channel Start Pattern Select */ +#define STOPPAT 0xc00000 /* DMA Channel Stop Pattern Select */ +#define COUNTPOS 0x1c000000 /* DMA Channel Count Position */ + +/* Bit masks for MXVR_AP_CTL */ + +#define STARTAP 0x1 /* Start Asynchronous Packet Transmission */ +#define nSTARTAP 0x0 +#define CANCELAP 0x2 /* Cancel Asynchronous Packet Transmission */ +#define nCANCELAP 0x0 +#define RESETAP 0x4 /* Reset Asynchronous Packet Arbitration */ +#define nRESETAP 0x0 +#define APRBE0 0x4000 /* Asynchronous Packet Receive Buffer Entry 0 */ +#define nAPRBE0 0x0 +#define APRBE1 0x8000 /* Asynchronous Packet Receive Buffer Entry 1 */ +#define nAPRBE1 0x0 + +/* Bit masks for MXVR_APRB_START_ADDR */ + +#define MXVR_APRB_START_ADDR 0x1fffffe /* Asynchronous Packet Receive Buffer Start Address */ + +/* Bit masks for MXVR_APRB_CURR_ADDR */ + +#define MXVR_APRB_CURR_ADDR 0xffffffff /* Asynchronous Packet Receive Buffer Current Address */ + +/* Bit masks for MXVR_APTB_START_ADDR */ + +#define MXVR_APTB_START_ADDR 0x1fffffe /* Asynchronous Packet Transmit Buffer Start Address */ + +/* Bit masks for MXVR_APTB_CURR_ADDR */ + +#define MXVR_APTB_CURR_ADDR 0xffffffff /* Asynchronous Packet Transmit Buffer Current Address */ + +/* Bit masks for MXVR_CM_CTL */ + +#define STARTCM 0x1 /* Start Control Message Transmission */ +#define nSTARTCM 0x0 +#define CANCELCM 0x2 /* Cancel Control Message Transmission */ +#define nCANCELCM 0x0 +#define CMRBE0 0x10000 /* Control Message Receive Buffer Entry 0 */ +#define nCMRBE0 0x0 +#define CMRBE1 0x20000 /* Control Message Receive Buffer Entry 1 */ +#define nCMRBE1 0x0 +#define CMRBE2 0x40000 /* Control Message Receive Buffer Entry 2 */ +#define nCMRBE2 0x0 +#define CMRBE3 0x80000 /* Control Message Receive Buffer Entry 3 */ +#define nCMRBE3 0x0 +#define CMRBE4 0x100000 /* Control Message Receive Buffer Entry 4 */ +#define nCMRBE4 0x0 +#define CMRBE5 0x200000 /* Control Message Receive Buffer Entry 5 */ +#define nCMRBE5 0x0 +#define CMRBE6 0x400000 /* Control Message Receive Buffer Entry 6 */ +#define nCMRBE6 0x0 +#define CMRBE7 0x800000 /* Control Message Receive Buffer Entry 7 */ +#define nCMRBE7 0x0 +#define CMRBE8 0x1000000 /* Control Message Receive Buffer Entry 8 */ +#define nCMRBE8 0x0 +#define CMRBE9 0x2000000 /* Control Message Receive Buffer Entry 9 */ +#define nCMRBE9 0x0 +#define CMRBE10 0x4000000 /* Control Message Receive Buffer Entry 10 */ +#define nCMRBE10 0x0 +#define CMRBE11 0x8000000 /* Control Message Receive Buffer Entry 11 */ +#define nCMRBE11 0x0 +#define CMRBE12 0x10000000 /* Control Message Receive Buffer Entry 12 */ +#define nCMRBE12 0x0 +#define CMRBE13 0x20000000 /* Control Message Receive Buffer Entry 13 */ +#define nCMRBE13 0x0 +#define CMRBE14 0x40000000 /* Control Message Receive Buffer Entry 14 */ +#define nCMRBE14 0x0 +#define CMRBE15 0x80000000 /* Control Message Receive Buffer Entry 15 */ +#define nCMRBE15 0x0 + +/* Bit masks for MXVR_CMRB_START_ADDR */ + +#define MXVR_CMRB_START_ADDR 0x1fffffe /* Control Message Receive Buffer Start Address */ + +/* Bit masks for MXVR_CMRB_CURR_ADDR */ + +#define MXVR_CMRB_CURR_ADDR 0xffffffff /* Control Message Receive Buffer Current Address */ + +/* Bit masks for MXVR_CMTB_START_ADDR */ + +#define MXVR_CMTB_START_ADDR 0x1fffffe /* Control Message Transmit Buffer Start Address */ + +/* Bit masks for MXVR_CMTB_CURR_ADDR */ + +#define MXVR_CMTB_CURR_ADDR 0xffffffff /* Control Message Transmit Buffer Current Address */ + +/* Bit masks for MXVR_RRDB_START_ADDR */ + +#define MXVR_RRDB_START_ADDR 0x1fffffe /* Remote Read Buffer Start Address */ + +/* Bit masks for MXVR_RRDB_CURR_ADDR */ + +#define MXVR_RRDB_CURR_ADDR 0xffffffff /* Remote Read Buffer Current Address */ + +/* Bit masks for MXVR_PAT_DATAx */ + +#define MATCH_DATA_0 0xff /* Pattern Match Data Byte 0 */ +#define MATCH_DATA_1 0xff00 /* Pattern Match Data Byte 1 */ +#define MATCH_DATA_2 0xff0000 /* Pattern Match Data Byte 2 */ +#define MATCH_DATA_3 0xff000000 /* Pattern Match Data Byte 3 */ + +/* Bit masks for MXVR_PAT_EN_0 */ + +#define MATCH_EN_0_0 0x1 /* Pattern Match Enable Byte 0 Bit 0 */ +#define nMATCH_EN_0_0 0x0 +#define MATCH_EN_0_1 0x2 /* Pattern Match Enable Byte 0 Bit 1 */ +#define nMATCH_EN_0_1 0x0 +#define MATCH_EN_0_2 0x4 /* Pattern Match Enable Byte 0 Bit 2 */ +#define nMATCH_EN_0_2 0x0 +#define MATCH_EN_0_3 0x8 /* Pattern Match Enable Byte 0 Bit 3 */ +#define nMATCH_EN_0_3 0x0 +#define MATCH_EN_0_4 0x10 /* Pattern Match Enable Byte 0 Bit 4 */ +#define nMATCH_EN_0_4 0x0 +#define MATCH_EN_0_5 0x20 /* Pattern Match Enable Byte 0 Bit 5 */ +#define nMATCH_EN_0_5 0x0 +#define MATCH_EN_0_6 0x40 /* Pattern Match Enable Byte 0 Bit 6 */ +#define nMATCH_EN_0_6 0x0 +#define MATCH_EN_0_7 0x80 /* Pattern Match Enable Byte 0 Bit 7 */ +#define nMATCH_EN_0_7 0x0 +#define MATCH_EN_1_0 0x100 /* Pattern Match Enable Byte 1 Bit 0 */ +#define nMATCH_EN_1_0 0x0 +#define MATCH_EN_1_1 0x200 /* Pattern Match Enable Byte 1 Bit 1 */ +#define nMATCH_EN_1_1 0x0 +#define MATCH_EN_1_2 0x400 /* Pattern Match Enable Byte 1 Bit 2 */ +#define nMATCH_EN_1_2 0x0 +#define MATCH_EN_1_3 0x800 /* Pattern Match Enable Byte 1 Bit 3 */ +#define nMATCH_EN_1_3 0x0 +#define MATCH_EN_1_4 0x1000 /* Pattern Match Enable Byte 1 Bit 4 */ +#define nMATCH_EN_1_4 0x0 +#define MATCH_EN_1_5 0x2000 /* Pattern Match Enable Byte 1 Bit 5 */ +#define nMATCH_EN_1_5 0x0 +#define MATCH_EN_1_6 0x4000 /* Pattern Match Enable Byte 1 Bit 6 */ +#define nMATCH_EN_1_6 0x0 +#define MATCH_EN_1_7 0x8000 /* Pattern Match Enable Byte 1 Bit 7 */ +#define nMATCH_EN_1_7 0x0 +#define MATCH_EN_2_0 0x10000 /* Pattern Match Enable Byte 2 Bit 0 */ +#define nMATCH_EN_2_0 0x0 +#define MATCH_EN_2_1 0x20000 /* Pattern Match Enable Byte 2 Bit 1 */ +#define nMATCH_EN_2_1 0x0 +#define MATCH_EN_2_2 0x40000 /* Pattern Match Enable Byte 2 Bit 2 */ +#define nMATCH_EN_2_2 0x0 +#define MATCH_EN_2_3 0x80000 /* Pattern Match Enable Byte 2 Bit 3 */ +#define nMATCH_EN_2_3 0x0 +#define MATCH_EN_2_4 0x100000 /* Pattern Match Enable Byte 2 Bit 4 */ +#define nMATCH_EN_2_4 0x0 +#define MATCH_EN_2_5 0x200000 /* Pattern Match Enable Byte 2 Bit 5 */ +#define nMATCH_EN_2_5 0x0 +#define MATCH_EN_2_6 0x400000 /* Pattern Match Enable Byte 2 Bit 6 */ +#define nMATCH_EN_2_6 0x0 +#define MATCH_EN_2_7 0x800000 /* Pattern Match Enable Byte 2 Bit 7 */ +#define nMATCH_EN_2_7 0x0 +#define MATCH_EN_3_0 0x1000000 /* Pattern Match Enable Byte 3 Bit 0 */ +#define nMATCH_EN_3_0 0x0 +#define MATCH_EN_3_1 0x2000000 /* Pattern Match Enable Byte 3 Bit 1 */ +#define nMATCH_EN_3_1 0x0 +#define MATCH_EN_3_2 0x4000000 /* Pattern Match Enable Byte 3 Bit 2 */ +#define nMATCH_EN_3_2 0x0 +#define MATCH_EN_3_3 0x8000000 /* Pattern Match Enable Byte 3 Bit 3 */ +#define nMATCH_EN_3_3 0x0 +#define MATCH_EN_3_4 0x10000000 /* Pattern Match Enable Byte 3 Bit 4 */ +#define nMATCH_EN_3_4 0x0 +#define MATCH_EN_3_5 0x20000000 /* Pattern Match Enable Byte 3 Bit 5 */ +#define nMATCH_EN_3_5 0x0 +#define MATCH_EN_3_6 0x40000000 /* Pattern Match Enable Byte 3 Bit 6 */ +#define nMATCH_EN_3_6 0x0 +#define MATCH_EN_3_7 0x80000000 /* Pattern Match Enable Byte 3 Bit 7 */ +#define nMATCH_EN_3_7 0x0 + +/* Bit masks for MXVR_PAT_EN_1 */ + +#define MATCH_EN_0_0 0x1 /* Pattern Match Enable Byte 0 Bit 0 */ +#define nMATCH_EN_0_0 0x0 +#define MATCH_EN_0_1 0x2 /* Pattern Match Enable Byte 0 Bit 1 */ +#define nMATCH_EN_0_1 0x0 +#define MATCH_EN_0_2 0x4 /* Pattern Match Enable Byte 0 Bit 2 */ +#define nMATCH_EN_0_2 0x0 +#define MATCH_EN_0_3 0x8 /* Pattern Match Enable Byte 0 Bit 3 */ +#define nMATCH_EN_0_3 0x0 +#define MATCH_EN_0_4 0x10 /* Pattern Match Enable Byte 0 Bit 4 */ +#define nMATCH_EN_0_4 0x0 +#define MATCH_EN_0_5 0x20 /* Pattern Match Enable Byte 0 Bit 5 */ +#define nMATCH_EN_0_5 0x0 +#define MATCH_EN_0_6 0x40 /* Pattern Match Enable Byte 0 Bit 6 */ +#define nMATCH_EN_0_6 0x0 +#define MATCH_EN_0_7 0x80 /* Pattern Match Enable Byte 0 Bit 7 */ +#define nMATCH_EN_0_7 0x0 +#define MATCH_EN_1_0 0x100 /* Pattern Match Enable Byte 1 Bit 0 */ +#define nMATCH_EN_1_0 0x0 +#define MATCH_EN_1_1 0x200 /* Pattern Match Enable Byte 1 Bit 1 */ +#define nMATCH_EN_1_1 0x0 +#define MATCH_EN_1_2 0x400 /* Pattern Match Enable Byte 1 Bit 2 */ +#define nMATCH_EN_1_2 0x0 +#define MATCH_EN_1_3 0x800 /* Pattern Match Enable Byte 1 Bit 3 */ +#define nMATCH_EN_1_3 0x0 +#define MATCH_EN_1_4 0x1000 /* Pattern Match Enable Byte 1 Bit 4 */ +#define nMATCH_EN_1_4 0x0 +#define MATCH_EN_1_5 0x2000 /* Pattern Match Enable Byte 1 Bit 5 */ +#define nMATCH_EN_1_5 0x0 +#define MATCH_EN_1_6 0x4000 /* Pattern Match Enable Byte 1 Bit 6 */ +#define nMATCH_EN_1_6 0x0 +#define MATCH_EN_1_7 0x8000 /* Pattern Match Enable Byte 1 Bit 7 */ +#define nMATCH_EN_1_7 0x0 +#define MATCH_EN_2_0 0x10000 /* Pattern Match Enable Byte 2 Bit 0 */ +#define nMATCH_EN_2_0 0x0 +#define MATCH_EN_2_1 0x20000 /* Pattern Match Enable Byte 2 Bit 1 */ +#define nMATCH_EN_2_1 0x0 +#define MATCH_EN_2_2 0x40000 /* Pattern Match Enable Byte 2 Bit 2 */ +#define nMATCH_EN_2_2 0x0 +#define MATCH_EN_2_3 0x80000 /* Pattern Match Enable Byte 2 Bit 3 */ +#define nMATCH_EN_2_3 0x0 +#define MATCH_EN_2_4 0x100000 /* Pattern Match Enable Byte 2 Bit 4 */ +#define nMATCH_EN_2_4 0x0 +#define MATCH_EN_2_5 0x200000 /* Pattern Match Enable Byte 2 Bit 5 */ +#define nMATCH_EN_2_5 0x0 +#define MATCH_EN_2_6 0x400000 /* Pattern Match Enable Byte 2 Bit 6 */ +#define nMATCH_EN_2_6 0x0 +#define MATCH_EN_2_7 0x800000 /* Pattern Match Enable Byte 2 Bit 7 */ +#define nMATCH_EN_2_7 0x0 +#define MATCH_EN_3_0 0x1000000 /* Pattern Match Enable Byte 3 Bit 0 */ +#define nMATCH_EN_3_0 0x0 +#define MATCH_EN_3_1 0x2000000 /* Pattern Match Enable Byte 3 Bit 1 */ +#define nMATCH_EN_3_1 0x0 +#define MATCH_EN_3_2 0x4000000 /* Pattern Match Enable Byte 3 Bit 2 */ +#define nMATCH_EN_3_2 0x0 +#define MATCH_EN_3_3 0x8000000 /* Pattern Match Enable Byte 3 Bit 3 */ +#define nMATCH_EN_3_3 0x0 +#define MATCH_EN_3_4 0x10000000 /* Pattern Match Enable Byte 3 Bit 4 */ +#define nMATCH_EN_3_4 0x0 +#define MATCH_EN_3_5 0x20000000 /* Pattern Match Enable Byte 3 Bit 5 */ +#define nMATCH_EN_3_5 0x0 +#define MATCH_EN_3_6 0x40000000 /* Pattern Match Enable Byte 3 Bit 6 */ +#define nMATCH_EN_3_6 0x0 +#define MATCH_EN_3_7 0x80000000 /* Pattern Match Enable Byte 3 Bit 7 */ +#define nMATCH_EN_3_7 0x0 + +/* Bit masks for MXVR_FRAME_CNT_0 */ + +#define FCNT 0xffff /* Frame Count */ + +/* Bit masks for MXVR_FRAME_CNT_1 */ + +#define FCNT 0xffff /* Frame Count */ + +/* Bit masks for MXVR_ROUTING_0 */ + +#define TX_CH0 0x3f /* Transmit Channel 0 */ +#define MUTE_CH0 0x80 /* Mute Channel 0 */ +#define nMUTE_CH0 0x0 +#define TX_CH1 0x3f00 /* Transmit Channel 0 */ +#define MUTE_CH1 0x8000 /* Mute Channel 0 */ +#define nMUTE_CH1 0x0 +#define TX_CH2 0x3f0000 /* Transmit Channel 0 */ +#define MUTE_CH2 0x800000 /* Mute Channel 0 */ +#define nMUTE_CH2 0x0 +#define TX_CH3 0x3f000000 /* Transmit Channel 0 */ +#define MUTE_CH3 0x80000000 /* Mute Channel 0 */ +#define nMUTE_CH3 0x0 + +/* Bit masks for MXVR_ROUTING_1 */ + +#define TX_CH4 0x3f /* Transmit Channel 4 */ +#define MUTE_CH4 0x80 /* Mute Channel 4 */ +#define nMUTE_CH4 0x0 +#define TX_CH5 0x3f00 /* Transmit Channel 5 */ +#define MUTE_CH5 0x8000 /* Mute Channel 5 */ +#define nMUTE_CH5 0x0 +#define TX_CH6 0x3f0000 /* Transmit Channel 6 */ +#define MUTE_CH6 0x800000 /* Mute Channel 6 */ +#define nMUTE_CH6 0x0 +#define TX_CH7 0x3f000000 /* Transmit Channel 7 */ +#define MUTE_CH7 0x80000000 /* Mute Channel 7 */ +#define nMUTE_CH7 0x0 + +/* Bit masks for MXVR_ROUTING_2 */ + +#define TX_CH8 0x3f /* Transmit Channel 8 */ +#define MUTE_CH8 0x80 /* Mute Channel 8 */ +#define nMUTE_CH8 0x0 +#define TX_CH9 0x3f00 /* Transmit Channel 9 */ +#define MUTE_CH9 0x8000 /* Mute Channel 9 */ +#define nMUTE_CH9 0x0 +#define TX_CH10 0x3f0000 /* Transmit Channel 10 */ +#define MUTE_CH10 0x800000 /* Mute Channel 10 */ +#define nMUTE_CH10 0x0 +#define TX_CH11 0x3f000000 /* Transmit Channel 11 */ +#define MUTE_CH11 0x80000000 /* Mute Channel 11 */ +#define nMUTE_CH11 0x0 + +/* Bit masks for MXVR_ROUTING_3 */ + +#define TX_CH12 0x3f /* Transmit Channel 12 */ +#define MUTE_CH12 0x80 /* Mute Channel 12 */ +#define nMUTE_CH12 0x0 +#define TX_CH13 0x3f00 /* Transmit Channel 13 */ +#define MUTE_CH13 0x8000 /* Mute Channel 13 */ +#define nMUTE_CH13 0x0 +#define TX_CH14 0x3f0000 /* Transmit Channel 14 */ +#define MUTE_CH14 0x800000 /* Mute Channel 14 */ +#define nMUTE_CH14 0x0 +#define TX_CH15 0x3f000000 /* Transmit Channel 15 */ +#define MUTE_CH15 0x80000000 /* Mute Channel 15 */ +#define nMUTE_CH15 0x0 + +/* Bit masks for MXVR_ROUTING_4 */ + +#define TX_CH16 0x3f /* Transmit Channel 16 */ +#define MUTE_CH16 0x80 /* Mute Channel 16 */ +#define nMUTE_CH16 0x0 +#define TX_CH17 0x3f00 /* Transmit Channel 17 */ +#define MUTE_CH17 0x8000 /* Mute Channel 17 */ +#define nMUTE_CH17 0x0 +#define TX_CH18 0x3f0000 /* Transmit Channel 18 */ +#define MUTE_CH18 0x800000 /* Mute Channel 18 */ +#define nMUTE_CH18 0x0 +#define TX_CH19 0x3f000000 /* Transmit Channel 19 */ +#define MUTE_CH19 0x80000000 /* Mute Channel 19 */ +#define nMUTE_CH19 0x0 + +/* Bit masks for MXVR_ROUTING_5 */ + +#define TX_CH20 0x3f /* Transmit Channel 20 */ +#define MUTE_CH20 0x80 /* Mute Channel 20 */ +#define nMUTE_CH20 0x0 +#define TX_CH21 0x3f00 /* Transmit Channel 21 */ +#define MUTE_CH21 0x8000 /* Mute Channel 21 */ +#define nMUTE_CH21 0x0 +#define TX_CH22 0x3f0000 /* Transmit Channel 22 */ +#define MUTE_CH22 0x800000 /* Mute Channel 22 */ +#define nMUTE_CH22 0x0 +#define TX_CH23 0x3f000000 /* Transmit Channel 23 */ +#define MUTE_CH23 0x80000000 /* Mute Channel 23 */ +#define nMUTE_CH23 0x0 + +/* Bit masks for MXVR_ROUTING_6 */ + +#define TX_CH24 0x3f /* Transmit Channel 24 */ +#define MUTE_CH24 0x80 /* Mute Channel 24 */ +#define nMUTE_CH24 0x0 +#define TX_CH25 0x3f00 /* Transmit Channel 25 */ +#define MUTE_CH25 0x8000 /* Mute Channel 25 */ +#define nMUTE_CH25 0x0 +#define TX_CH26 0x3f0000 /* Transmit Channel 26 */ +#define MUTE_CH26 0x800000 /* Mute Channel 26 */ +#define nMUTE_CH26 0x0 +#define TX_CH27 0x3f000000 /* Transmit Channel 27 */ +#define MUTE_CH27 0x80000000 /* Mute Channel 27 */ +#define nMUTE_CH27 0x0 + +/* Bit masks for MXVR_ROUTING_7 */ + +#define TX_CH28 0x3f /* Transmit Channel 28 */ +#define MUTE_CH28 0x80 /* Mute Channel 28 */ +#define nMUTE_CH28 0x0 +#define TX_CH29 0x3f00 /* Transmit Channel 29 */ +#define MUTE_CH29 0x8000 /* Mute Channel 29 */ +#define nMUTE_CH29 0x0 +#define TX_CH30 0x3f0000 /* Transmit Channel 30 */ +#define MUTE_CH30 0x800000 /* Mute Channel 30 */ +#define nMUTE_CH30 0x0 +#define TX_CH31 0x3f000000 /* Transmit Channel 31 */ +#define MUTE_CH31 0x80000000 /* Mute Channel 31 */ +#define nMUTE_CH31 0x0 + +/* Bit masks for MXVR_ROUTING_8 */ + +#define TX_CH32 0x3f /* Transmit Channel 32 */ +#define MUTE_CH32 0x80 /* Mute Channel 32 */ +#define nMUTE_CH32 0x0 +#define TX_CH33 0x3f00 /* Transmit Channel 33 */ +#define MUTE_CH33 0x8000 /* Mute Channel 33 */ +#define nMUTE_CH33 0x0 +#define TX_CH34 0x3f0000 /* Transmit Channel 34 */ +#define MUTE_CH34 0x800000 /* Mute Channel 34 */ +#define nMUTE_CH34 0x0 +#define TX_CH35 0x3f000000 /* Transmit Channel 35 */ +#define MUTE_CH35 0x80000000 /* Mute Channel 35 */ +#define nMUTE_CH35 0x0 + +/* Bit masks for MXVR_ROUTING_9 */ + +#define TX_CH36 0x3f /* Transmit Channel 36 */ +#define MUTE_CH36 0x80 /* Mute Channel 36 */ +#define nMUTE_CH36 0x0 +#define TX_CH37 0x3f00 /* Transmit Channel 37 */ +#define MUTE_CH37 0x8000 /* Mute Channel 37 */ +#define nMUTE_CH37 0x0 +#define TX_CH38 0x3f0000 /* Transmit Channel 38 */ +#define MUTE_CH38 0x800000 /* Mute Channel 38 */ +#define nMUTE_CH38 0x0 +#define TX_CH39 0x3f000000 /* Transmit Channel 39 */ +#define MUTE_CH39 0x80000000 /* Mute Channel 39 */ +#define nMUTE_CH39 0x0 + +/* Bit masks for MXVR_ROUTING_10 */ + +#define TX_CH40 0x3f /* Transmit Channel 40 */ +#define MUTE_CH40 0x80 /* Mute Channel 40 */ +#define nMUTE_CH40 0x0 +#define TX_CH41 0x3f00 /* Transmit Channel 41 */ +#define MUTE_CH41 0x8000 /* Mute Channel 41 */ +#define nMUTE_CH41 0x0 +#define TX_CH42 0x3f0000 /* Transmit Channel 42 */ +#define MUTE_CH42 0x800000 /* Mute Channel 42 */ +#define nMUTE_CH42 0x0 +#define TX_CH43 0x3f000000 /* Transmit Channel 43 */ +#define MUTE_CH43 0x80000000 /* Mute Channel 43 */ +#define nMUTE_CH43 0x0 + +/* Bit masks for MXVR_ROUTING_11 */ + +#define TX_CH44 0x3f /* Transmit Channel 44 */ +#define MUTE_CH44 0x80 /* Mute Channel 44 */ +#define nMUTE_CH44 0x0 +#define TX_CH45 0x3f00 /* Transmit Channel 45 */ +#define MUTE_CH45 0x8000 /* Mute Channel 45 */ +#define nMUTE_CH45 0x0 +#define TX_CH46 0x3f0000 /* Transmit Channel 46 */ +#define MUTE_CH46 0x800000 /* Mute Channel 46 */ +#define nMUTE_CH46 0x0 +#define TX_CH47 0x3f000000 /* Transmit Channel 47 */ +#define MUTE_CH47 0x80000000 /* Mute Channel 47 */ +#define nMUTE_CH47 0x0 + +/* Bit masks for MXVR_ROUTING_12 */ + +#define TX_CH48 0x3f /* Transmit Channel 48 */ +#define MUTE_CH48 0x80 /* Mute Channel 48 */ +#define nMUTE_CH48 0x0 +#define TX_CH49 0x3f00 /* Transmit Channel 49 */ +#define MUTE_CH49 0x8000 /* Mute Channel 49 */ +#define nMUTE_CH49 0x0 +#define TX_CH50 0x3f0000 /* Transmit Channel 50 */ +#define MUTE_CH50 0x800000 /* Mute Channel 50 */ +#define nMUTE_CH50 0x0 +#define TX_CH51 0x3f000000 /* Transmit Channel 51 */ +#define MUTE_CH51 0x80000000 /* Mute Channel 51 */ +#define nMUTE_CH51 0x0 + +/* Bit masks for MXVR_ROUTING_13 */ + +#define TX_CH52 0x3f /* Transmit Channel 52 */ +#define MUTE_CH52 0x80 /* Mute Channel 52 */ +#define nMUTE_CH52 0x0 +#define TX_CH53 0x3f00 /* Transmit Channel 53 */ +#define MUTE_CH53 0x8000 /* Mute Channel 53 */ +#define nMUTE_CH53 0x0 +#define TX_CH54 0x3f0000 /* Transmit Channel 54 */ +#define MUTE_CH54 0x800000 /* Mute Channel 54 */ +#define nMUTE_CH54 0x0 +#define TX_CH55 0x3f000000 /* Transmit Channel 55 */ +#define MUTE_CH55 0x80000000 /* Mute Channel 55 */ +#define nMUTE_CH55 0x0 + +/* Bit masks for MXVR_ROUTING_14 */ + +#define TX_CH56 0x3f /* Transmit Channel 56 */ +#define MUTE_CH56 0x80 /* Mute Channel 56 */ +#define nMUTE_CH56 0x0 +#define TX_CH57 0x3f00 /* Transmit Channel 57 */ +#define MUTE_CH57 0x8000 /* Mute Channel 57 */ +#define nMUTE_CH57 0x0 +#define TX_CH58 0x3f0000 /* Transmit Channel 58 */ +#define MUTE_CH58 0x800000 /* Mute Channel 58 */ +#define nMUTE_CH58 0x0 +#define TX_CH59 0x3f000000 /* Transmit Channel 59 */ +#define MUTE_CH59 0x80000000 /* Mute Channel 59 */ +#define nMUTE_CH59 0x0 + +/* Bit masks for MXVR_BLOCK_CNT */ + +#define BCNT 0xffff /* Block Count */ + +/* Bit masks for MXVR_CLK_CTL */ + +#define MXTALCEN 0x1 /* MXVR Crystal Oscillator Clock Enable */ +#define nMXTALCEN 0x0 +#define MXTALFEN 0x2 /* MXVR Crystal Oscillator Feedback Enable */ +#define nMXTALFEN 0x0 +#define MXTALMUL 0x30 /* MXVR Crystal Multiplier */ +#define CLKX3SEL 0x80 /* Clock Generation Source Select */ +#define nCLKX3SEL 0x0 +#define MMCLKEN 0x100 /* Master Clock Enable */ +#define nMMCLKEN 0x0 +#define MMCLKMUL 0x1e00 /* Master Clock Multiplication Factor */ +#define PLLSMPS 0xe000 /* MXVR PLL State Machine Prescaler */ +#define MBCLKEN 0x10000 /* Bit Clock Enable */ +#define nMBCLKEN 0x0 +#define MBCLKDIV 0x1e0000 /* Bit Clock Divide Factor */ +#define INVRX 0x800000 /* Invert Receive Data */ +#define nINVRX 0x0 +#define MFSEN 0x1000000 /* Frame Sync Enable */ +#define nMFSEN 0x0 +#define MFSDIV 0x1e000000 /* Frame Sync Divide Factor */ +#define MFSSEL 0x60000000 /* Frame Sync Select */ +#define MFSSYNC 0x80000000 /* Frame Sync Synchronization Select */ +#define nMFSSYNC 0x0 + +/* Bit masks for MXVR_CDRPLL_CTL */ + +#define CDRSMEN 0x1 /* MXVR CDRPLL State Machine Enable */ +#define nCDRSMEN 0x0 +#define CDRRSTB 0x2 /* MXVR CDRPLL Reset */ +#define nCDRRSTB 0x0 +#define CDRSVCO 0x4 /* MXVR CDRPLL Start VCO */ +#define nCDRSVCO 0x0 +#define CDRMODE 0x8 /* MXVR CDRPLL CDR Mode Select */ +#define nCDRMODE 0x0 +#define CDRSCNT 0x3f0 /* MXVR CDRPLL Start Counter */ +#define CDRLCNT 0xfc00 /* MXVR CDRPLL Lock Counter */ +#define CDRSHPSEL 0x3f0000 /* MXVR CDRPLL Shaper Select */ +#define CDRSHPEN 0x800000 /* MXVR CDRPLL Shaper Enable */ +#define nCDRSHPEN 0x0 +#define CDRCPSEL 0xff000000 /* MXVR CDRPLL Charge Pump Current Select */ + +/* Bit masks for MXVR_FMPLL_CTL */ + +#define FMSMEN 0x1 /* MXVR FMPLL State Machine Enable */ +#define nFMSMEN 0x0 +#define FMRSTB 0x2 /* MXVR FMPLL Reset */ +#define nFMRSTB 0x0 +#define FMSVCO 0x4 /* MXVR FMPLL Start VCO */ +#define nFMSVCO 0x0 +#define FMSCNT 0x3f0 /* MXVR FMPLL Start Counter */ +#define FMLCNT 0xfc00 /* MXVR FMPLL Lock Counter */ +#define FMCPSEL 0xff000000 /* MXVR FMPLL Charge Pump Current Select */ + +/* Bit masks for MXVR_PIN_CTL */ + +#define MTXONBOD 0x1 /* MTXONB Open Drain Select */ +#define nMTXONBOD 0x0 +#define MTXONBG 0x2 /* MTXONB Gates MTX Select */ +#define nMTXONBG 0x0 +#define MFSOE 0x10 /* MFS Output Enable */ +#define nMFSOE 0x0 +#define MFSGPSEL 0x20 /* MFS General Purpose Output Select */ +#define nMFSGPSEL 0x0 +#define MFSGPDAT 0x40 /* MFS General Purpose Output Data */ +#define nMFSGPDAT 0x0 + +/* Bit masks for MXVR_SCLK_CNT */ + +#define SCNT 0xffff /* System Clock Count */ + +/* Bit masks for KPAD_CTL */ + +#define KPAD_EN 0x1 /* Keypad Enable */ +#define nKPAD_EN 0x0 +#define KPAD_IRQMODE 0x6 /* Key Press Interrupt Enable */ +#define KPAD_ROWEN 0x1c00 /* Row Enable Width */ +#define KPAD_COLEN 0xe000 /* Column Enable Width */ + +/* Bit masks for KPAD_PRESCALE */ + +#define KPAD_PRESCALE_VAL 0x3f /* Key Prescale Value */ + +/* Bit masks for KPAD_MSEL */ + +#define DBON_SCALE 0xff /* Debounce Scale Value */ +#define COLDRV_SCALE 0xff00 /* Column Driver Scale Value */ + +/* Bit masks for KPAD_ROWCOL */ + +#define KPAD_ROW 0xff /* Rows Pressed */ +#define KPAD_COL 0xff00 /* Columns Pressed */ + +/* Bit masks for KPAD_STAT */ + +#define KPAD_IRQ 0x1 /* Keypad Interrupt Status */ +#define nKPAD_IRQ 0x0 +#define KPAD_MROWCOL 0x6 /* Multiple Row/Column Keypress Status */ +#define KPAD_PRESSED 0x8 /* Key press current status */ +#define nKPAD_PRESSED 0x0 + +/* Bit masks for KPAD_SOFTEVAL */ + +#define KPAD_SOFTEVAL_E 0x2 /* Software Programmable Force Evaluate */ +#define nKPAD_SOFTEVAL_E 0x0 + +/* Bit masks for SDH_COMMAND */ + +#define CMD_IDX 0x3f /* Command Index */ +#define CMD_RSP 0x40 /* Response */ +#define nCMD_RSP 0x0 +#define CMD_L_RSP 0x80 /* Long Response */ +#define nCMD_L_RSP 0x0 +#define CMD_INT_E 0x100 /* Command Interrupt */ +#define nCMD_INT_E 0x0 +#define CMD_PEND_E 0x200 /* Command Pending */ +#define nCMD_PEND_E 0x0 +#define CMD_E 0x400 /* Command Enable */ +#define nCMD_E 0x0 + +/* Bit masks for SDH_PWR_CTL */ + +#define PWR_ON 0x3 /* Power On */ +#if 0 +#define TBD 0x3c /* TBD */ +#endif +#define SD_CMD_OD 0x40 /* Open Drain Output */ +#define nSD_CMD_OD 0x0 +#define ROD_CTL 0x80 /* Rod Control */ +#define nROD_CTL 0x0 + +/* Bit masks for SDH_CLK_CTL */ + +#define CLKDIV 0xff /* MC_CLK Divisor */ +#define CLK_E 0x100 /* MC_CLK Bus Clock Enable */ +#define nCLK_E 0x0 +#define PWR_SV_E 0x200 /* Power Save Enable */ +#define nPWR_SV_E 0x0 +#define CLKDIV_BYPASS 0x400 /* Bypass Divisor */ +#define nCLKDIV_BYPASS 0x0 +#define WIDE_BUS 0x800 /* Wide Bus Mode Enable */ +#define nWIDE_BUS 0x0 + +/* Bit masks for SDH_RESP_CMD */ + +#define RESP_CMD 0x3f /* Response Command */ + +/* Bit masks for SDH_DATA_CTL */ + +#define DTX_E 0x1 /* Data Transfer Enable */ +#define nDTX_E 0x0 +#define DTX_DIR 0x2 /* Data Transfer Direction */ +#define nDTX_DIR 0x0 +#define DTX_MODE 0x4 /* Data Transfer Mode */ +#define nDTX_MODE 0x0 +#define DTX_DMA_E 0x8 /* Data Transfer DMA Enable */ +#define nDTX_DMA_E 0x0 +#define DTX_BLK_LGTH 0xf0 /* Data Transfer Block Length */ + +/* Bit masks for SDH_STATUS */ + +#define CMD_CRC_FAIL 0x1 /* CMD CRC Fail */ +#define nCMD_CRC_FAIL 0x0 +#define DAT_CRC_FAIL 0x2 /* Data CRC Fail */ +#define nDAT_CRC_FAIL 0x0 +#define CMD_TIMEOUT 0x4 /* CMD Time Out */ +#define nCMD_TIMEOUT 0x0 +#define DAT_TIMEOUT 0x8 /* Data Time Out */ +#define nDAT_TIMEOUT 0x0 +#define TX_UNDERRUN 0x10 /* Transmit Underrun */ +#define nTX_UNDERRUN 0x0 +#define RX_OVERRUN 0x20 /* Receive Overrun */ +#define nRX_OVERRUN 0x0 +#define CMD_RESP_END 0x40 /* CMD Response End */ +#define nCMD_RESP_END 0x0 +#define CMD_SENT 0x80 /* CMD Sent */ +#define nCMD_SENT 0x0 +#define DAT_END 0x100 /* Data End */ +#define nDAT_END 0x0 +#define START_BIT_ERR 0x200 /* Start Bit Error */ +#define nSTART_BIT_ERR 0x0 +#define DAT_BLK_END 0x400 /* Data Block End */ +#define nDAT_BLK_END 0x0 +#define CMD_ACT 0x800 /* CMD Active */ +#define nCMD_ACT 0x0 +#define TX_ACT 0x1000 /* Transmit Active */ +#define nTX_ACT 0x0 +#define RX_ACT 0x2000 /* Receive Active */ +#define nRX_ACT 0x0 +#define TX_FIFO_STAT 0x4000 /* Transmit FIFO Status */ +#define nTX_FIFO_STAT 0x0 +#define RX_FIFO_STAT 0x8000 /* Receive FIFO Status */ +#define nRX_FIFO_STAT 0x0 +#define TX_FIFO_FULL 0x10000 /* Transmit FIFO Full */ +#define nTX_FIFO_FULL 0x0 +#define RX_FIFO_FULL 0x20000 /* Receive FIFO Full */ +#define nRX_FIFO_FULL 0x0 +#define TX_FIFO_ZERO 0x40000 /* Transmit FIFO Empty */ +#define nTX_FIFO_ZERO 0x0 +#define RX_DAT_ZERO 0x80000 /* Receive FIFO Empty */ +#define nRX_DAT_ZERO 0x0 +#define TX_DAT_RDY 0x100000 /* Transmit Data Available */ +#define nTX_DAT_RDY 0x0 +#define RX_FIFO_RDY 0x200000 /* Receive Data Available */ +#define nRX_FIFO_RDY 0x0 + +/* Bit masks for SDH_STATUS_CLR */ + +#define CMD_CRC_FAIL_STAT 0x1 /* CMD CRC Fail Status */ +#define nCMD_CRC_FAIL_STAT 0x0 +#define DAT_CRC_FAIL_STAT 0x2 /* Data CRC Fail Status */ +#define nDAT_CRC_FAIL_STAT 0x0 +#define CMD_TIMEOUT_STAT 0x4 /* CMD Time Out Status */ +#define nCMD_TIMEOUT_STAT 0x0 +#define DAT_TIMEOUT_STAT 0x8 /* Data Time Out status */ +#define nDAT_TIMEOUT_STAT 0x0 +#define TX_UNDERRUN_STAT 0x10 /* Transmit Underrun Status */ +#define nTX_UNDERRUN_STAT 0x0 +#define RX_OVERRUN_STAT 0x20 /* Receive Overrun Status */ +#define nRX_OVERRUN_STAT 0x0 +#define CMD_RESP_END_STAT 0x40 /* CMD Response End Status */ +#define nCMD_RESP_END_STAT 0x0 +#define CMD_SENT_STAT 0x80 /* CMD Sent Status */ +#define nCMD_SENT_STAT 0x0 +#define DAT_END_STAT 0x100 /* Data End Status */ +#define nDAT_END_STAT 0x0 +#define START_BIT_ERR_STAT 0x200 /* Start Bit Error Status */ +#define nSTART_BIT_ERR_STAT 0x0 +#define DAT_BLK_END_STAT 0x400 /* Data Block End Status */ +#define nDAT_BLK_END_STAT 0x0 + +/* Bit masks for SDH_MASK0 */ + +#define CMD_CRC_FAIL_MASK 0x1 /* CMD CRC Fail Mask */ +#define nCMD_CRC_FAIL_MASK 0x0 +#define DAT_CRC_FAIL_MASK 0x2 /* Data CRC Fail Mask */ +#define nDAT_CRC_FAIL_MASK 0x0 +#define CMD_TIMEOUT_MASK 0x4 /* CMD Time Out Mask */ +#define nCMD_TIMEOUT_MASK 0x0 +#define DAT_TIMEOUT_MASK 0x8 /* Data Time Out Mask */ +#define nDAT_TIMEOUT_MASK 0x0 +#define TX_UNDERRUN_MASK 0x10 /* Transmit Underrun Mask */ +#define nTX_UNDERRUN_MASK 0x0 +#define RX_OVERRUN_MASK 0x20 /* Receive Overrun Mask */ +#define nRX_OVERRUN_MASK 0x0 +#define CMD_RESP_END_MASK 0x40 /* CMD Response End Mask */ +#define nCMD_RESP_END_MASK 0x0 +#define CMD_SENT_MASK 0x80 /* CMD Sent Mask */ +#define nCMD_SENT_MASK 0x0 +#define DAT_END_MASK 0x100 /* Data End Mask */ +#define nDAT_END_MASK 0x0 +#define START_BIT_ERR_MASK 0x200 /* Start Bit Error Mask */ +#define nSTART_BIT_ERR_MASK 0x0 +#define DAT_BLK_END_MASK 0x400 /* Data Block End Mask */ +#define nDAT_BLK_END_MASK 0x0 +#define CMD_ACT_MASK 0x800 /* CMD Active Mask */ +#define nCMD_ACT_MASK 0x0 +#define TX_ACT_MASK 0x1000 /* Transmit Active Mask */ +#define nTX_ACT_MASK 0x0 +#define RX_ACT_MASK 0x2000 /* Receive Active Mask */ +#define nRX_ACT_MASK 0x0 +#define TX_FIFO_STAT_MASK 0x4000 /* Transmit FIFO Status Mask */ +#define nTX_FIFO_STAT_MASK 0x0 +#define RX_FIFO_STAT_MASK 0x8000 /* Receive FIFO Status Mask */ +#define nRX_FIFO_STAT_MASK 0x0 +#define TX_FIFO_FULL_MASK 0x10000 /* Transmit FIFO Full Mask */ +#define nTX_FIFO_FULL_MASK 0x0 +#define RX_FIFO_FULL_MASK 0x20000 /* Receive FIFO Full Mask */ +#define nRX_FIFO_FULL_MASK 0x0 +#define TX_FIFO_ZERO_MASK 0x40000 /* Transmit FIFO Empty Mask */ +#define nTX_FIFO_ZERO_MASK 0x0 +#define RX_DAT_ZERO_MASK 0x80000 /* Receive FIFO Empty Mask */ +#define nRX_DAT_ZERO_MASK 0x0 +#define TX_DAT_RDY_MASK 0x100000 /* Transmit Data Available Mask */ +#define nTX_DAT_RDY_MASK 0x0 +#define RX_FIFO_RDY_MASK 0x200000 /* Receive Data Available Mask */ +#define nRX_FIFO_RDY_MASK 0x0 + +/* Bit masks for SDH_FIFO_CNT */ + +#define FIFO_COUNT 0x7fff /* FIFO Count */ + +/* Bit masks for SDH_E_STATUS */ + +#define SDIO_INT_DET 0x2 /* SDIO Int Detected */ +#define nSDIO_INT_DET 0x0 +#define SD_CARD_DET 0x10 /* SD Card Detect */ +#define nSD_CARD_DET 0x0 + +/* Bit masks for SDH_E_MASK */ + +#define SDIO_MSK 0x2 /* Mask SDIO Int Detected */ +#define nSDIO_MSK 0x0 +#define SCD_MSK 0x40 /* Mask Card Detect */ +#define nSCD_MSK 0x0 + +/* Bit masks for SDH_CFG */ + +#define CLKS_EN 0x1 /* Clocks Enable */ +#define nCLKS_EN 0x0 +#define SD4E 0x4 /* SDIO 4-Bit Enable */ +#define nSD4E 0x0 +#define MWE 0x8 /* Moving Window Enable */ +#define nMWE 0x0 +#define SD_RST 0x10 /* SDMMC Reset */ +#define nSD_RST 0x0 +#define PUP_SDDAT 0x20 /* Pull-up SD_DAT */ +#define nPUP_SDDAT 0x0 +#define PUP_SDDAT3 0x40 /* Pull-up SD_DAT3 */ +#define nPUP_SDDAT3 0x0 +#define PD_SDDAT3 0x80 /* Pull-down SD_DAT3 */ +#define nPD_SDDAT3 0x0 + +/* Bit masks for SDH_RD_WAIT_EN */ + +#define RWR 0x1 /* Read Wait Request */ +#define nRWR 0x0 + +/* Bit masks for ATAPI_CONTROL */ + +#define PIO_START 0x1 /* Start PIO/Reg Op */ +#define nPIO_START 0x0 +#define MULTI_START 0x2 /* Start Multi-DMA Op */ +#define nMULTI_START 0x0 +#define ULTRA_START 0x4 /* Start Ultra-DMA Op */ +#define nULTRA_START 0x0 +#define XFER_DIR 0x8 /* Transfer Direction */ +#define nXFER_DIR 0x0 +#define IORDY_EN 0x10 /* IORDY Enable */ +#define nIORDY_EN 0x0 +#define FIFO_FLUSH 0x20 /* Flush FIFOs */ +#define nFIFO_FLUSH 0x0 +#define SOFT_RST 0x40 /* Soft Reset */ +#define nSOFT_RST 0x0 +#define DEV_RST 0x80 /* Device Reset */ +#define nDEV_RST 0x0 +#define TFRCNT_RST 0x100 /* Trans Count Reset */ +#define nTFRCNT_RST 0x0 +#define END_ON_TERM 0x200 /* End/Terminate Select */ +#define nEND_ON_TERM 0x0 +#define PIO_USE_DMA 0x400 /* PIO-DMA Enable */ +#define nPIO_USE_DMA 0x0 +#define UDMAIN_FIFO_THRS 0xf000 /* Ultra DMA-IN FIFO Threshold */ + +/* Bit masks for ATAPI_STATUS */ + +#define PIO_XFER_ON 0x1 /* PIO transfer in progress */ +#define nPIO_XFER_ON 0x0 +#define MULTI_XFER_ON 0x2 /* Multi-word DMA transfer in progress */ +#define nMULTI_XFER_ON 0x0 +#define ULTRA_XFER_ON 0x4 /* Ultra DMA transfer in progress */ +#define nULTRA_XFER_ON 0x0 +#define ULTRA_IN_FL 0xf0 /* Ultra DMA Input FIFO Level */ + +/* Bit masks for ATAPI_DEV_ADDR */ + +#define DEV_ADDR 0x1f /* Device Address */ + +/* Bit masks for ATAPI_INT_MASK */ + +#define ATAPI_DEV_INT_MASK 0x1 /* Device interrupt mask */ +#define nATAPI_DEV_INT_MASK 0x0 +#define PIO_DONE_MASK 0x2 /* PIO transfer done interrupt mask */ +#define nPIO_DONE_MASK 0x0 +#define MULTI_DONE_MASK 0x4 /* Multi-DMA transfer done interrupt mask */ +#define nMULTI_DONE_MASK 0x0 +#define UDMAIN_DONE_MASK 0x8 /* Ultra-DMA in transfer done interrupt mask */ +#define nUDMAIN_DONE_MASK 0x0 +#define UDMAOUT_DONE_MASK 0x10 /* Ultra-DMA out transfer done interrupt mask */ +#define nUDMAOUT_DONE_MASK 0x0 +#define HOST_TERM_XFER_MASK 0x20 /* Host terminate current transfer interrupt mask */ +#define nHOST_TERM_XFER_MASK 0x0 +#define MULTI_TERM_MASK 0x40 /* Device terminate Multi-DMA transfer interrupt mask */ +#define nMULTI_TERM_MASK 0x0 +#define UDMAIN_TERM_MASK 0x80 /* Device terminate Ultra-DMA-in transfer interrupt mask */ +#define nUDMAIN_TERM_MASK 0x0 +#define UDMAOUT_TERM_MASK 0x100 /* Device terminate Ultra-DMA-out transfer interrupt mask */ +#define nUDMAOUT_TERM_MASK 0x0 + +/* Bit masks for ATAPI_INT_STATUS */ + +#define ATAPI_DEV_INT 0x1 /* Device interrupt status */ +#define nATAPI_DEV_INT 0x0 +#define PIO_DONE_INT 0x2 /* PIO transfer done interrupt status */ +#define nPIO_DONE_INT 0x0 +#define MULTI_DONE_INT 0x4 /* Multi-DMA transfer done interrupt status */ +#define nMULTI_DONE_INT 0x0 +#define UDMAIN_DONE_INT 0x8 /* Ultra-DMA in transfer done interrupt status */ +#define nUDMAIN_DONE_INT 0x0 +#define UDMAOUT_DONE_INT 0x10 /* Ultra-DMA out transfer done interrupt status */ +#define nUDMAOUT_DONE_INT 0x0 +#define HOST_TERM_XFER_INT 0x20 /* Host terminate current transfer interrupt status */ +#define nHOST_TERM_XFER_INT 0x0 +#define MULTI_TERM_INT 0x40 /* Device terminate Multi-DMA transfer interrupt status */ +#define nMULTI_TERM_INT 0x0 +#define UDMAIN_TERM_INT 0x80 /* Device terminate Ultra-DMA-in transfer interrupt status */ +#define nUDMAIN_TERM_INT 0x0 +#define UDMAOUT_TERM_INT 0x100 /* Device terminate Ultra-DMA-out transfer interrupt status */ +#define nUDMAOUT_TERM_INT 0x0 + +/* Bit masks for ATAPI_LINE_STATUS */ + +#define ATAPI_INTR 0x1 /* Device interrupt to host line status */ +#define nATAPI_INTR 0x0 +#define ATAPI_DASP 0x2 /* Device dasp to host line status */ +#define nATAPI_DASP 0x0 +#define ATAPI_CS0N 0x4 /* ATAPI chip select 0 line status */ +#define nATAPI_CS0N 0x0 +#define ATAPI_CS1N 0x8 /* ATAPI chip select 1 line status */ +#define nATAPI_CS1N 0x0 +#define ATAPI_ADDR 0x70 /* ATAPI address line status */ +#define ATAPI_DMAREQ 0x80 /* ATAPI DMA request line status */ +#define nATAPI_DMAREQ 0x0 +#define ATAPI_DMAACKN 0x100 /* ATAPI DMA acknowledge line status */ +#define nATAPI_DMAACKN 0x0 +#define ATAPI_DIOWN 0x200 /* ATAPI write line status */ +#define nATAPI_DIOWN 0x0 +#define ATAPI_DIORN 0x400 /* ATAPI read line status */ +#define nATAPI_DIORN 0x0 +#define ATAPI_IORDY 0x800 /* ATAPI IORDY line status */ +#define nATAPI_IORDY 0x0 + +/* Bit masks for ATAPI_SM_STATE */ + +#define PIO_CSTATE 0xf /* PIO mode state machine current state */ +#define DMA_CSTATE 0xf0 /* DMA mode state machine current state */ +#define UDMAIN_CSTATE 0xf00 /* Ultra DMA-In mode state machine current state */ +#define UDMAOUT_CSTATE 0xf000 /* ATAPI IORDY line status */ + +/* Bit masks for ATAPI_TERMINATE */ + +#define ATAPI_HOST_TERM 0x1 /* Host terminationation */ +#define nATAPI_HOST_TERM 0x0 + +/* Bit masks for ATAPI_REG_TIM_0 */ + +#define T2_REG 0xff /* End of cycle time for register access transfers */ +#define TEOC_REG 0xff00 /* Selects DIOR/DIOW pulsewidth */ + +/* Bit masks for ATAPI_PIO_TIM_0 */ + +#define T1_REG 0xf /* Time from address valid to DIOR/DIOW */ +#define T2_REG_PIO 0xff0 /* DIOR/DIOW pulsewidth */ +#define T4_REG 0xf000 /* DIOW data hold */ + +/* Bit masks for ATAPI_PIO_TIM_1 */ + +#define TEOC_REG_PIO 0xff /* End of cycle time for PIO access transfers. */ + +/* Bit masks for ATAPI_MULTI_TIM_0 */ + +#define TD 0xff /* DIOR/DIOW asserted pulsewidth */ +#define TM 0xff00 /* Time from address valid to DIOR/DIOW */ + +/* Bit masks for ATAPI_MULTI_TIM_1 */ + +#define TKW 0xff /* Selects DIOW negated pulsewidth */ +#define TKR 0xff00 /* Selects DIOR negated pulsewidth */ + +/* Bit masks for ATAPI_MULTI_TIM_2 */ + +#define TH 0xff /* Selects DIOW data hold */ +#define TEOC 0xff00 /* Selects end of cycle for DMA */ + +/* Bit masks for ATAPI_ULTRA_TIM_0 */ + +#define TACK 0xff /* Selects setup and hold times for TACK */ +#define TENV 0xff00 /* Selects envelope time */ + +/* Bit masks for ATAPI_ULTRA_TIM_1 */ + +#define TDVS 0xff /* Selects data valid setup time */ +#define TCYC_TDVS 0xff00 /* Selects cycle time - TDVS time */ + +/* Bit masks for ATAPI_ULTRA_TIM_2 */ + +#define TSS 0xff /* Selects time from STROBE edge to negation of DMARQ or assertion of STOP */ +#define TMLI 0xff00 /* Selects interlock time */ + +/* Bit masks for ATAPI_ULTRA_TIM_3 */ + +#define TZAH 0xff /* Selects minimum delay required for output */ +#define READY_PAUSE 0xff00 /* Selects ready to pause */ + +/* Bit masks for TIMER_ENABLE1 */ + +#define TIMEN8 0x1 /* Timer 8 Enable */ +#define nTIMEN8 0x0 +#define TIMEN9 0x2 /* Timer 9 Enable */ +#define nTIMEN9 0x0 +#define TIMEN10 0x4 /* Timer 10 Enable */ +#define nTIMEN10 0x0 + +/* Bit masks for TIMER_DISABLE1 */ + +#define TIMDIS8 0x1 /* Timer 8 Disable */ +#define nTIMDIS8 0x0 +#define TIMDIS9 0x2 /* Timer 9 Disable */ +#define nTIMDIS9 0x0 +#define TIMDIS10 0x4 /* Timer 10 Disable */ +#define nTIMDIS10 0x0 + +/* Bit masks for TIMER_STATUS1 */ + +#define TIMIL8 0x1 /* Timer 8 Interrupt */ +#define nTIMIL8 0x0 +#define TIMIL9 0x2 /* Timer 9 Interrupt */ +#define nTIMIL9 0x0 +#define TIMIL10 0x4 /* Timer 10 Interrupt */ +#define nTIMIL10 0x0 +#define TOVF_ERR8 0x10 /* Timer 8 Counter Overflow */ +#define nTOVF_ERR8 0x0 +#define TOVF_ERR9 0x20 /* Timer 9 Counter Overflow */ +#define nTOVF_ERR9 0x0 +#define TOVF_ERR10 0x40 /* Timer 10 Counter Overflow */ +#define nTOVF_ERR10 0x0 +#define TRUN8 0x1000 /* Timer 8 Slave Enable Status */ +#define nTRUN8 0x0 +#define TRUN9 0x2000 /* Timer 9 Slave Enable Status */ +#define nTRUN9 0x0 +#define TRUN10 0x4000 /* Timer 10 Slave Enable Status */ +#define nTRUN10 0x0 + +/* Bit masks for EPPI0 are obtained from common base header for EPPIx (EPPI1 and EPPI2) */ + +/* Bit masks for USB_FADDR */ + +#define FUNCTION_ADDRESS 0x7f /* Function address */ + +/* Bit masks for USB_POWER */ + +#define ENABLE_SUSPENDM 0x1 /* enable SuspendM output */ +#define nENABLE_SUSPENDM 0x0 +#define SUSPEND_MODE 0x2 /* Suspend Mode indicator */ +#define nSUSPEND_MODE 0x0 +#define RESUME_MODE 0x4 /* DMA Mode */ +#define nRESUME_MODE 0x0 +#define RESET 0x8 /* Reset indicator */ +#define nRESET 0x0 +#define HS_MODE 0x10 /* High Speed mode indicator */ +#define nHS_MODE 0x0 +#define HS_ENABLE 0x20 /* high Speed Enable */ +#define nHS_ENABLE 0x0 +#define SOFT_CONN 0x40 /* Soft connect */ +#define nSOFT_CONN 0x0 +#define ISO_UPDATE 0x80 /* Isochronous update */ +#define nISO_UPDATE 0x0 + +/* Bit masks for USB_INTRTX */ + +#define EP0_TX 0x1 /* Tx Endpoint 0 interrupt */ +#define nEP0_TX 0x0 +#define EP1_TX 0x2 /* Tx Endpoint 1 interrupt */ +#define nEP1_TX 0x0 +#define EP2_TX 0x4 /* Tx Endpoint 2 interrupt */ +#define nEP2_TX 0x0 +#define EP3_TX 0x8 /* Tx Endpoint 3 interrupt */ +#define nEP3_TX 0x0 +#define EP4_TX 0x10 /* Tx Endpoint 4 interrupt */ +#define nEP4_TX 0x0 +#define EP5_TX 0x20 /* Tx Endpoint 5 interrupt */ +#define nEP5_TX 0x0 +#define EP6_TX 0x40 /* Tx Endpoint 6 interrupt */ +#define nEP6_TX 0x0 +#define EP7_TX 0x80 /* Tx Endpoint 7 interrupt */ +#define nEP7_TX 0x0 + +/* Bit masks for USB_INTRRX */ + +#define EP1_RX 0x2 /* Rx Endpoint 1 interrupt */ +#define nEP1_RX 0x0 +#define EP2_RX 0x4 /* Rx Endpoint 2 interrupt */ +#define nEP2_RX 0x0 +#define EP3_RX 0x8 /* Rx Endpoint 3 interrupt */ +#define nEP3_RX 0x0 +#define EP4_RX 0x10 /* Rx Endpoint 4 interrupt */ +#define nEP4_RX 0x0 +#define EP5_RX 0x20 /* Rx Endpoint 5 interrupt */ +#define nEP5_RX 0x0 +#define EP6_RX 0x40 /* Rx Endpoint 6 interrupt */ +#define nEP6_RX 0x0 +#define EP7_RX 0x80 /* Rx Endpoint 7 interrupt */ +#define nEP7_RX 0x0 + +/* Bit masks for USB_INTRTXE */ + +#define EP0_TX_E 0x1 /* Endpoint 0 interrupt Enable */ +#define nEP0_TX_E 0x0 +#define EP1_TX_E 0x2 /* Tx Endpoint 1 interrupt Enable */ +#define nEP1_TX_E 0x0 +#define EP2_TX_E 0x4 /* Tx Endpoint 2 interrupt Enable */ +#define nEP2_TX_E 0x0 +#define EP3_TX_E 0x8 /* Tx Endpoint 3 interrupt Enable */ +#define nEP3_TX_E 0x0 +#define EP4_TX_E 0x10 /* Tx Endpoint 4 interrupt Enable */ +#define nEP4_TX_E 0x0 +#define EP5_TX_E 0x20 /* Tx Endpoint 5 interrupt Enable */ +#define nEP5_TX_E 0x0 +#define EP6_TX_E 0x40 /* Tx Endpoint 6 interrupt Enable */ +#define nEP6_TX_E 0x0 +#define EP7_TX_E 0x80 /* Tx Endpoint 7 interrupt Enable */ +#define nEP7_TX_E 0x0 + +/* Bit masks for USB_INTRRXE */ + +#define EP1_RX_E 0x2 /* Rx Endpoint 1 interrupt Enable */ +#define nEP1_RX_E 0x0 +#define EP2_RX_E 0x4 /* Rx Endpoint 2 interrupt Enable */ +#define nEP2_RX_E 0x0 +#define EP3_RX_E 0x8 /* Rx Endpoint 3 interrupt Enable */ +#define nEP3_RX_E 0x0 +#define EP4_RX_E 0x10 /* Rx Endpoint 4 interrupt Enable */ +#define nEP4_RX_E 0x0 +#define EP5_RX_E 0x20 /* Rx Endpoint 5 interrupt Enable */ +#define nEP5_RX_E 0x0 +#define EP6_RX_E 0x40 /* Rx Endpoint 6 interrupt Enable */ +#define nEP6_RX_E 0x0 +#define EP7_RX_E 0x80 /* Rx Endpoint 7 interrupt Enable */ +#define nEP7_RX_E 0x0 + +/* Bit masks for USB_INTRUSB */ + +#define SUSPEND_B 0x1 /* Suspend indicator */ +#define nSUSPEND_B 0x0 +#define RESUME_B 0x2 /* Resume indicator */ +#define nRESUME_B 0x0 +#define RESET_OR_BABLE_B 0x4 /* Reset/babble indicator */ +#define nRESET_OR_BABLE_B 0x0 +#define SOF_B 0x8 /* Start of frame */ +#define nSOF_B 0x0 +#define CONN_B 0x10 /* Connection indicator */ +#define nCONN_B 0x0 +#define DISCON_B 0x20 /* Disconnect indicator */ +#define nDISCON_B 0x0 +#define SESSION_REQ_B 0x40 /* Session Request */ +#define nSESSION_REQ_B 0x0 +#define VBUS_ERROR_B 0x80 /* Vbus threshold indicator */ +#define nVBUS_ERROR_B 0x0 + +/* Bit masks for USB_INTRUSBE */ + +#define SUSPEND_BE 0x1 /* Suspend indicator int enable */ +#define nSUSPEND_BE 0x0 +#define RESUME_BE 0x2 /* Resume indicator int enable */ +#define nRESUME_BE 0x0 +#define RESET_OR_BABLE_BE 0x4 /* Reset/babble indicator int enable */ +#define nRESET_OR_BABLE_BE 0x0 +#define SOF_BE 0x8 /* Start of frame int enable */ +#define nSOF_BE 0x0 +#define CONN_BE 0x10 /* Connection indicator int enable */ +#define nCONN_BE 0x0 +#define DISCON_BE 0x20 /* Disconnect indicator int enable */ +#define nDISCON_BE 0x0 +#define SESSION_REQ_BE 0x40 /* Session Request int enable */ +#define nSESSION_REQ_BE 0x0 +#define VBUS_ERROR_BE 0x80 /* Vbus threshold indicator int enable */ +#define nVBUS_ERROR_BE 0x0 + +/* Bit masks for USB_FRAME */ + +#define FRAME_NUMBER 0x7ff /* Frame number */ + +/* Bit masks for USB_INDEX */ + +#define SELECTED_ENDPOINT 0xf /* selected endpoint */ + +/* Bit masks for USB_GLOBAL_CTL */ + +#define GLOBAL_ENA 0x1 /* enables USB module */ +#define nGLOBAL_ENA 0x0 +#define EP1_TX_ENA 0x2 /* Transmit endpoint 1 enable */ +#define nEP1_TX_ENA 0x0 +#define EP2_TX_ENA 0x4 /* Transmit endpoint 2 enable */ +#define nEP2_TX_ENA 0x0 +#define EP3_TX_ENA 0x8 /* Transmit endpoint 3 enable */ +#define nEP3_TX_ENA 0x0 +#define EP4_TX_ENA 0x10 /* Transmit endpoint 4 enable */ +#define nEP4_TX_ENA 0x0 +#define EP5_TX_ENA 0x20 /* Transmit endpoint 5 enable */ +#define nEP5_TX_ENA 0x0 +#define EP6_TX_ENA 0x40 /* Transmit endpoint 6 enable */ +#define nEP6_TX_ENA 0x0 +#define EP7_TX_ENA 0x80 /* Transmit endpoint 7 enable */ +#define nEP7_TX_ENA 0x0 +#define EP1_RX_ENA 0x100 /* Receive endpoint 1 enable */ +#define nEP1_RX_ENA 0x0 +#define EP2_RX_ENA 0x200 /* Receive endpoint 2 enable */ +#define nEP2_RX_ENA 0x0 +#define EP3_RX_ENA 0x400 /* Receive endpoint 3 enable */ +#define nEP3_RX_ENA 0x0 +#define EP4_RX_ENA 0x800 /* Receive endpoint 4 enable */ +#define nEP4_RX_ENA 0x0 +#define EP5_RX_ENA 0x1000 /* Receive endpoint 5 enable */ +#define nEP5_RX_ENA 0x0 +#define EP6_RX_ENA 0x2000 /* Receive endpoint 6 enable */ +#define nEP6_RX_ENA 0x0 +#define EP7_RX_ENA 0x4000 /* Receive endpoint 7 enable */ +#define nEP7_RX_ENA 0x0 + +/* Bit masks for USB_OTG_DEV_CTL */ + +#define SESSION 0x1 /* session indicator */ +#define nSESSION 0x0 +#define HOST_REQ 0x2 /* Host negotiation request */ +#define nHOST_REQ 0x0 +#define HOST_MODE 0x4 /* indicates USBDRC is a host */ +#define nHOST_MODE 0x0 +#define VBUS0 0x8 /* Vbus level indicator[0] */ +#define nVBUS0 0x0 +#define VBUS1 0x10 /* Vbus level indicator[1] */ +#define nVBUS1 0x0 +#define LSDEV 0x20 /* Low-speed indicator */ +#define nLSDEV 0x0 +#define FSDEV 0x40 /* Full or High-speed indicator */ +#define nFSDEV 0x0 +#define B_DEVICE 0x80 /* A' or 'B' device indicator */ +#define nB_DEVICE 0x0 + +/* Bit masks for USB_OTG_VBUS_IRQ */ + +#define DRIVE_VBUS_ON 0x1 /* indicator to drive VBUS control circuit */ +#define nDRIVE_VBUS_ON 0x0 +#define DRIVE_VBUS_OFF 0x2 /* indicator to shut off charge pump */ +#define nDRIVE_VBUS_OFF 0x0 +#define CHRG_VBUS_START 0x4 /* indicator for external circuit to start charging VBUS */ +#define nCHRG_VBUS_START 0x0 +#define CHRG_VBUS_END 0x8 /* indicator for external circuit to end charging VBUS */ +#define nCHRG_VBUS_END 0x0 +#define DISCHRG_VBUS_START 0x10 /* indicator to start discharging VBUS */ +#define nDISCHRG_VBUS_START 0x0 +#define DISCHRG_VBUS_END 0x20 /* indicator to stop discharging VBUS */ +#define nDISCHRG_VBUS_END 0x0 + +/* Bit masks for USB_OTG_VBUS_MASK */ + +#define DRIVE_VBUS_ON_ENA 0x1 /* enable DRIVE_VBUS_ON interrupt */ +#define nDRIVE_VBUS_ON_ENA 0x0 +#define DRIVE_VBUS_OFF_ENA 0x2 /* enable DRIVE_VBUS_OFF interrupt */ +#define nDRIVE_VBUS_OFF_ENA 0x0 +#define CHRG_VBUS_START_ENA 0x4 /* enable CHRG_VBUS_START interrupt */ +#define nCHRG_VBUS_START_ENA 0x0 +#define CHRG_VBUS_END_ENA 0x8 /* enable CHRG_VBUS_END interrupt */ +#define nCHRG_VBUS_END_ENA 0x0 +#define DISCHRG_VBUS_START_ENA 0x10 /* enable DISCHRG_VBUS_START interrupt */ +#define nDISCHRG_VBUS_START_ENA 0x0 +#define DISCHRG_VBUS_END_ENA 0x20 /* enable DISCHRG_VBUS_END interrupt */ +#define nDISCHRG_VBUS_END_ENA 0x0 + +/* Bit masks for USB_CSR0 */ + +#define RXPKTRDY 0x1 /* data packet receive indicator */ +#define nRXPKTRDY 0x0 +#define TXPKTRDY 0x2 /* data packet in FIFO indicator */ +#define nTXPKTRDY 0x0 +#define STALL_SENT 0x4 /* STALL handshake sent */ +#define nSTALL_SENT 0x0 +#define DATAEND 0x8 /* Data end indicator */ +#define nDATAEND 0x0 +#define SETUPEND 0x10 /* Setup end */ +#define nSETUPEND 0x0 +#define SENDSTALL 0x20 /* Send STALL handshake */ +#define nSENDSTALL 0x0 +#define SERVICED_RXPKTRDY 0x40 /* used to clear the RxPktRdy bit */ +#define nSERVICED_RXPKTRDY 0x0 +#define SERVICED_SETUPEND 0x80 /* used to clear the SetupEnd bit */ +#define nSERVICED_SETUPEND 0x0 +#define FLUSHFIFO 0x100 /* flush endpoint FIFO */ +#define nFLUSHFIFO 0x0 +#define STALL_RECEIVED_H 0x4 /* STALL handshake received host mode */ +#define nSTALL_RECEIVED_H 0x0 +#define SETUPPKT_H 0x8 /* send Setup token host mode */ +#define nSETUPPKT_H 0x0 +#define ERROR_H 0x10 /* timeout error indicator host mode */ +#define nERROR_H 0x0 +#define REQPKT_H 0x20 /* Request an IN transaction host mode */ +#define nREQPKT_H 0x0 +#define STATUSPKT_H 0x40 /* Status stage transaction host mode */ +#define nSTATUSPKT_H 0x0 +#define NAK_TIMEOUT_H 0x80 /* EP0 halted after a NAK host mode */ +#define nNAK_TIMEOUT_H 0x0 + +/* Bit masks for USB_COUNT0 */ + +#define EP0_RX_COUNT 0x7f /* number of received bytes in EP0 FIFO */ + +/* Bit masks for USB_NAKLIMIT0 */ + +#define EP0_NAK_LIMIT 0x1f /* number of frames/micro frames after which EP0 timeouts */ + +/* Bit masks for USB_TX_MAX_PACKET */ + +#define MAX_PACKET_SIZE_T 0x7ff /* maximum data pay load in a frame */ + +/* Bit masks for USB_RX_MAX_PACKET */ + +#define MAX_PACKET_SIZE_R 0x7ff /* maximum data pay load in a frame */ + +/* Bit masks for USB_TXCSR */ + +#define TXPKTRDY_T 0x1 /* data packet in FIFO indicator */ +#define nTXPKTRDY_T 0x0 +#define FIFO_NOT_EMPTY_T 0x2 /* FIFO not empty */ +#define nFIFO_NOT_EMPTY_T 0x0 +#define UNDERRUN_T 0x4 /* TxPktRdy not set for an IN token */ +#define nUNDERRUN_T 0x0 +#define FLUSHFIFO_T 0x8 /* flush endpoint FIFO */ +#define nFLUSHFIFO_T 0x0 +#define STALL_SEND_T 0x10 /* issue a Stall handshake */ +#define nSTALL_SEND_T 0x0 +#define STALL_SENT_T 0x20 /* Stall handshake transmitted */ +#define nSTALL_SENT_T 0x0 +#define CLEAR_DATATOGGLE_T 0x40 /* clear endpoint data toggle */ +#define nCLEAR_DATATOGGLE_T 0x0 +#define INCOMPTX_T 0x80 /* indicates that a large packet is split */ +#define nINCOMPTX_T 0x0 +#define DMAREQMODE_T 0x400 /* DMA mode (0 or 1) selection */ +#define nDMAREQMODE_T 0x0 +#define FORCE_DATATOGGLE_T 0x800 /* Force data toggle */ +#define nFORCE_DATATOGGLE_T 0x0 +#define DMAREQ_ENA_T 0x1000 /* Enable DMA request for Tx EP */ +#define nDMAREQ_ENA_T 0x0 +#define ISO_T 0x4000 /* enable Isochronous transfers */ +#define nISO_T 0x0 +#define AUTOSET_T 0x8000 /* allows TxPktRdy to be set automatically */ +#define nAUTOSET_T 0x0 +#define ERROR_TH 0x4 /* error condition host mode */ +#define nERROR_TH 0x0 +#define STALL_RECEIVED_TH 0x20 /* Stall handshake received host mode */ +#define nSTALL_RECEIVED_TH 0x0 +#define NAK_TIMEOUT_TH 0x80 /* NAK timeout host mode */ +#define nNAK_TIMEOUT_TH 0x0 + +/* Bit masks for USB_TXCOUNT */ + +#define TX_COUNT 0x1fff /* Number of bytes to be written to the selected endpoint Tx FIFO */ + +/* Bit masks for USB_RXCSR */ + +#define RXPKTRDY_R 0x1 /* data packet in FIFO indicator */ +#define nRXPKTRDY_R 0x0 +#define FIFO_FULL_R 0x2 /* FIFO not empty */ +#define nFIFO_FULL_R 0x0 +#define OVERRUN_R 0x4 /* TxPktRdy not set for an IN token */ +#define nOVERRUN_R 0x0 +#define DATAERROR_R 0x8 /* Out packet cannot be loaded into Rx FIFO */ +#define nDATAERROR_R 0x0 +#define FLUSHFIFO_R 0x10 /* flush endpoint FIFO */ +#define nFLUSHFIFO_R 0x0 +#define STALL_SEND_R 0x20 /* issue a Stall handshake */ +#define nSTALL_SEND_R 0x0 +#define STALL_SENT_R 0x40 /* Stall handshake transmitted */ +#define nSTALL_SENT_R 0x0 +#define CLEAR_DATATOGGLE_R 0x80 /* clear endpoint data toggle */ +#define nCLEAR_DATATOGGLE_R 0x0 +#define INCOMPRX_R 0x100 /* indicates that a large packet is split */ +#define nINCOMPRX_R 0x0 +#define DMAREQMODE_R 0x800 /* DMA mode (0 or 1) selection */ +#define nDMAREQMODE_R 0x0 +#define DISNYET_R 0x1000 /* disable Nyet handshakes */ +#define nDISNYET_R 0x0 +#define DMAREQ_ENA_R 0x2000 /* Enable DMA request for Tx EP */ +#define nDMAREQ_ENA_R 0x0 +#define ISO_R 0x4000 /* enable Isochronous transfers */ +#define nISO_R 0x0 +#define AUTOCLEAR_R 0x8000 /* allows TxPktRdy to be set automatically */ +#define nAUTOCLEAR_R 0x0 +#define ERROR_RH 0x4 /* TxPktRdy not set for an IN token host mode */ +#define nERROR_RH 0x0 +#define REQPKT_RH 0x20 /* request an IN transaction host mode */ +#define nREQPKT_RH 0x0 +#define STALL_RECEIVED_RH 0x40 /* Stall handshake received host mode */ +#define nSTALL_RECEIVED_RH 0x0 +#define INCOMPRX_RH 0x100 /* indicates that a large packet is split host mode */ +#define nINCOMPRX_RH 0x0 +#define DMAREQMODE_RH 0x800 /* DMA mode (0 or 1) selection host mode */ +#define nDMAREQMODE_RH 0x0 +#define AUTOREQ_RH 0x4000 /* sets ReqPkt automatically host mode */ +#define nAUTOREQ_RH 0x0 + +/* Bit masks for USB_RXCOUNT */ + +#define RX_COUNT 0x1fff /* Number of received bytes in the packet in the Rx FIFO */ + +/* Bit masks for USB_TXTYPE */ + +#define TARGET_EP_NO_T 0xf /* EP number */ +#define PROTOCOL_T 0xc /* transfer type */ + +/* Bit masks for USB_TXINTERVAL */ + +#define TX_POLL_INTERVAL 0xff /* polling interval for selected Tx EP */ + +/* Bit masks for USB_RXTYPE */ + +#define TARGET_EP_NO_R 0xf /* EP number */ +#define PROTOCOL_R 0xc /* transfer type */ + +/* Bit masks for USB_RXINTERVAL */ + +#define RX_POLL_INTERVAL 0xff /* polling interval for selected Rx EP */ + +/* Bit masks for USB_DMA_INTERRUPT */ + +#define DMA0_INT 0x1 /* DMA0 pending interrupt */ +#define nDMA0_INT 0x0 +#define DMA1_INT 0x2 /* DMA1 pending interrupt */ +#define nDMA1_INT 0x0 +#define DMA2_INT 0x4 /* DMA2 pending interrupt */ +#define nDMA2_INT 0x0 +#define DMA3_INT 0x8 /* DMA3 pending interrupt */ +#define nDMA3_INT 0x0 +#define DMA4_INT 0x10 /* DMA4 pending interrupt */ +#define nDMA4_INT 0x0 +#define DMA5_INT 0x20 /* DMA5 pending interrupt */ +#define nDMA5_INT 0x0 +#define DMA6_INT 0x40 /* DMA6 pending interrupt */ +#define nDMA6_INT 0x0 +#define DMA7_INT 0x80 /* DMA7 pending interrupt */ +#define nDMA7_INT 0x0 + +/* Bit masks for USB_DMAxCONTROL */ + +#define DMA_ENA 0x1 /* DMA enable */ +#define nDMA_ENA 0x0 +#define DIRECTION 0x2 /* direction of DMA transfer */ +#define nDIRECTION 0x0 +#define MODE 0x4 /* DMA Bus error */ +#define nMODE 0x0 +#define INT_ENA 0x8 /* Interrupt enable */ +#define nINT_ENA 0x0 +#define EPNUM 0xf0 /* EP number */ +#define BUSERROR 0x100 /* DMA Bus error */ +#define nBUSERROR 0x0 + +/* Bit masks for USB_DMAxADDRHIGH */ + +#define DMA_ADDR_HIGH 0xffff /* Upper 16-bits of memory source/destination address for the DMA master channel */ + +/* Bit masks for USB_DMAxADDRLOW */ + +#define DMA_ADDR_LOW 0xffff /* Lower 16-bits of memory source/destination address for the DMA master channel */ + +/* Bit masks for USB_DMAxCOUNTHIGH */ + +#define DMA_COUNT_HIGH 0xffff /* Upper 16-bits of byte count of DMA transfer for DMA master channel */ + +/* Bit masks for USB_DMAxCOUNTLOW */ + +#define DMA_COUNT_LOW 0xffff /* Lower 16-bits of byte count of DMA transfer for DMA master channel */ + +/* Bit masks for HMDMAx_CONTROL */ + +#define HMDMAEN 0x1 /* Handshake MDMA Enable */ +#define nHMDMAEN 0x0 +#define REP 0x2 /* Handshake MDMA Request Polarity */ +#define nREP 0x0 +#define UTE 0x8 /* Urgency Threshold Enable */ +#define nUTE 0x0 +#define OIE 0x10 /* Overflow Interrupt Enable */ +#define nOIE 0x0 +#define BDIE 0x20 /* Block Done Interrupt Enable */ +#define nBDIE 0x0 +#define MBDI 0x40 /* Mask Block Done Interrupt */ +#define nMBDI 0x0 +#define DRQ 0x300 /* Handshake MDMA Request Type */ +#define RBC 0x1000 /* Force Reload of BCOUNT */ +#define nRBC 0x0 +#define PS 0x2000 /* Pin Status */ +#define nPS 0x0 +#define OI 0x4000 /* Overflow Interrupt Generated */ +#define nOI 0x0 +#define BDI 0x8000 /* Block Done Interrupt Generated */ +#define nBDI 0x0 + +/* ******************************************* */ +/* MULTI BIT MACRO ENUMERATIONS */ +/* ******************************************* */ + +/* ************************ */ +/* MXVR Address Offsets */ +/* ************************ */ + +/* Control Message Receive Buffer (CMRB) Address Offsets */ + +#define CMRB_STRIDE 0x00000016lu + +#define CMRB_DST_OFFSET 0x00000000lu +#define CMRB_SRC_OFFSET 0x00000002lu +#define CMRB_DATA_OFFSET 0x00000005lu + +/* Control Message Transmit Buffer (CMTB) Address Offsets */ + +#define CMTB_PRIO_OFFSET 0x00000000lu +#define CMTB_DST_OFFSET 0x00000002lu +#define CMTB_SRC_OFFSET 0x00000004lu +#define CMTB_TYPE_OFFSET 0x00000006lu +#define CMTB_DATA_OFFSET 0x00000007lu + +#define CMTB_ANSWER_OFFSET 0x0000000Alu + +#define CMTB_STAT_N_OFFSET 0x00000018lu +#define CMTB_STAT_A_OFFSET 0x00000016lu +#define CMTB_STAT_D_OFFSET 0x0000000Elu +#define CMTB_STAT_R_OFFSET 0x00000014lu +#define CMTB_STAT_W_OFFSET 0x00000014lu +#define CMTB_STAT_G_OFFSET 0x00000014lu + +/* Asynchronous Packet Receive Buffer (APRB) Address Offsets */ + +#define APRB_STRIDE 0x00000400lu + +#define APRB_DST_OFFSET 0x00000000lu +#define APRB_LEN_OFFSET 0x00000002lu +#define APRB_SRC_OFFSET 0x00000004lu +#define APRB_DATA_OFFSET 0x00000006lu + +/* Asynchronous Packet Transmit Buffer (APTB) Address Offsets */ + +#define APTB_PRIO_OFFSET 0x00000000lu +#define APTB_DST_OFFSET 0x00000002lu +#define APTB_LEN_OFFSET 0x00000004lu +#define APTB_SRC_OFFSET 0x00000006lu +#define APTB_DATA_OFFSET 0x00000008lu + +/* Remote Read Buffer (RRDB) Address Offsets */ + +#define RRDB_WADDR_OFFSET 0x00000100lu +#define RRDB_WLEN_OFFSET 0x00000101lu + +/* **************** */ +/* MXVR Macros */ +/* **************** */ + +/* MXVR_CONFIG Macros */ + +#define SET_MSB(x) ( ( (x) & 0xF ) << 9) + +/* MXVR_INT_STAT_1 Macros */ + +#define DONEX(x) (0x00000002 << (4 * (x))) +#define HDONEX(x) (0x00000001 << (4 * (x))) + +/* MXVR_INT_EN_1 Macros */ + +#define DONEENX(x) (0x00000002 << (4 * (x))) +#define HDONEENX(x) (0x00000001 << (4 * (x))) + +/* MXVR_CDRPLL_CTL Macros */ + +#define SET_CDRSHPSEL(x) ( ( (x) & 0x3F ) << 16) + +/* MXVR_FMPLL_CTL Macros */ + +#define SET_CDRCPSEL(x) ( ( (x) & 0xFF ) << 24) +#define SET_FMCPSEL(x) ( ( (x) & 0xFF ) << 24) + +#endif /* _DEF_BF549_H */ diff --git a/include/asm-blackfin/mach-bf548/defBF54x_base.h b/include/asm-blackfin/mach-bf548/defBF54x_base.h new file mode 100644 index 00000000000000..a1b200fe6a1f4f --- /dev/null +++ b/include/asm-blackfin/mach-bf548/defBF54x_base.h @@ -0,0 +1,4902 @@ +/* + * File: include/asm-blackfin/mach-bf548/defBF54x_base.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef _DEF_BF54X_H +#define _DEF_BF54X_H + + +/* ************************************************************** */ +/* SYSTEM & MMR ADDRESS DEFINITIONS COMMON TO ALL ADSP-BF54x */ +/* ************************************************************** */ + +/* PLL Registers */ + +#define PLL_CTL 0xffc00000 /* PLL Control Register */ +#define PLL_DIV 0xffc00004 /* PLL Divisor Register */ +#define VR_CTL 0xffc00008 /* Voltage Regulator Control Register */ +#define PLL_STAT 0xffc0000c /* PLL Status Register */ +#define PLL_LOCKCNT 0xffc00010 /* PLL Lock Count Register */ + +/* Debug/MP/Emulation Registers (0xFFC00014 - 0xFFC00014) */ + +#define CHIPID 0xffc00014 + +/* System Reset and Interrupt Controller (0xFFC00100 - 0xFFC00104) */ + +#define SWRST 0xffc00100 /* Software Reset Register */ +#define SYSCR 0xffc00104 /* System Configuration register */ + +/* SIC Registers */ + +#define SIC_IMASK0 0xffc0010c /* System Interrupt Mask Register 0 */ +#define SIC_IMASK1 0xffc00110 /* System Interrupt Mask Register 1 */ +#define SIC_IMASK2 0xffc00114 /* System Interrupt Mask Register 2 */ +#define SIC_ISR0 0xffc00118 /* System Interrupt Status Register 0 */ +#define SIC_ISR1 0xffc0011c /* System Interrupt Status Register 1 */ +#define SIC_ISR2 0xffc00120 /* System Interrupt Status Register 2 */ +#define SIC_IWR0 0xffc00124 /* System Interrupt Wakeup Register 0 */ +#define SIC_IWR1 0xffc00128 /* System Interrupt Wakeup Register 1 */ +#define SIC_IWR2 0xffc0012c /* System Interrupt Wakeup Register 2 */ +#define SIC_IAR0 0xffc00130 /* System Interrupt Assignment Register 0 */ +#define SIC_IAR1 0xffc00134 /* System Interrupt Assignment Register 1 */ +#define SIC_IAR2 0xffc00138 /* System Interrupt Assignment Register 2 */ +#define SIC_IAR3 0xffc0013c /* System Interrupt Assignment Register 3 */ +#define SIC_IAR4 0xffc00140 /* System Interrupt Assignment Register 4 */ +#define SIC_IAR5 0xffc00144 /* System Interrupt Assignment Register 5 */ +#define SIC_IAR6 0xffc00148 /* System Interrupt Assignment Register 6 */ +#define SIC_IAR7 0xffc0014c /* System Interrupt Assignment Register 7 */ +#define SIC_IAR8 0xffc00150 /* System Interrupt Assignment Register 8 */ +#define SIC_IAR9 0xffc00154 /* System Interrupt Assignment Register 9 */ +#define SIC_IAR10 0xffc00158 /* System Interrupt Assignment Register 10 */ +#define SIC_IAR11 0xffc0015c /* System Interrupt Assignment Register 11 */ + +/* Watchdog Timer Registers */ + +#define WDOG_CTL 0xffc00200 /* Watchdog Control Register */ +#define WDOG_CNT 0xffc00204 /* Watchdog Count Register */ +#define WDOG_STAT 0xffc00208 /* Watchdog Status Register */ + +/* RTC Registers */ + +#define RTC_STAT 0xffc00300 /* RTC Status Register */ +#define RTC_ICTL 0xffc00304 /* RTC Interrupt Control Register */ +#define RTC_ISTAT 0xffc00308 /* RTC Interrupt Status Register */ +#define RTC_SWCNT 0xffc0030c /* RTC Stopwatch Count Register */ +#define RTC_ALARM 0xffc00310 /* RTC Alarm Register */ +#define RTC_PREN 0xffc00314 /* RTC Prescaler Enable Register */ + +/* UART0 Registers */ + +#define UART0_DLL 0xffc00400 /* Divisor Latch Low Byte */ +#define UART0_DLH 0xffc00404 /* Divisor Latch High Byte */ +#define UART0_GCTL 0xffc00408 /* Global Control Register */ +#define UART0_LCR 0xffc0040c /* Line Control Register */ +#define UART0_MCR 0xffc00410 /* Modem Control Register */ +#define UART0_LSR 0xffc00414 /* Line Status Register */ +#define UART0_MSR 0xffc00418 /* Modem Status Register */ +#define UART0_SCR 0xffc0041c /* Scratch Register */ +#define UART0_IER_SET 0xffc00420 /* Interrupt Enable Register Set */ +#define UART0_IER_CLEAR 0xffc00424 /* Interrupt Enable Register Clear */ +#define UART0_THR 0xffc00428 /* Transmit Hold Register */ +#define UART0_RBR 0xffc0042c /* Receive Buffer Register */ + +/* SPI0 Registers */ + +#define SPI0_CTL 0xffc00500 /* SPI0 Control Register */ +#define SPI0_FLG 0xffc00504 /* SPI0 Flag Register */ +#define SPI0_STAT 0xffc00508 /* SPI0 Status Register */ +#define SPI0_TDBR 0xffc0050c /* SPI0 Transmit Data Buffer Register */ +#define SPI0_RDBR 0xffc00510 /* SPI0 Receive Data Buffer Register */ +#define SPI0_BAUD 0xffc00514 /* SPI0 Baud Rate Register */ +#define SPI0_SHADOW 0xffc00518 /* SPI0 Receive Data Buffer Shadow Register */ + +/* Timer Group of 3 registers are not defined in the shared file because they are not available on the ADSP-BF542 processor */ + +/* Two Wire Interface Registers (TWI0) */ + +#define TWI0_CLKDIV 0xffc00700 /* Clock Divider Register */ +#define TWI0_CONTROL 0xffc00704 /* TWI Control Register */ +#define TWI0_SLAVE_CTRL 0xffc00708 /* TWI Slave Mode Control Register */ +#define TWI0_SLAVE_STAT 0xffc0070c /* TWI Slave Mode Status Register */ +#define TWI0_SLAVE_ADDR 0xffc00710 /* TWI Slave Mode Address Register */ +#define TWI0_MASTER_CTRL 0xffc00714 /* TWI Master Mode Control Register */ +#define TWI0_MASTER_STAT 0xffc00718 /* TWI Master Mode Status Register */ +#define TWI0_MASTER_ADDR 0xffc0071c /* TWI Master Mode Address Register */ +#define TWI0_INT_STAT 0xffc00720 /* TWI Interrupt Status Register */ +#define TWI0_INT_MASK 0xffc00724 /* TWI Interrupt Mask Register */ +#define TWI0_FIFO_CTRL 0xffc00728 /* TWI FIFO Control Register */ +#define TWI0_FIFO_STAT 0xffc0072c /* TWI FIFO Status Register */ +#define TWI0_XMT_DATA8 0xffc00780 /* TWI FIFO Transmit Data Single Byte Register */ +#define TWI0_XMT_DATA16 0xffc00784 /* TWI FIFO Transmit Data Double Byte Register */ +#define TWI0_RCV_DATA8 0xffc00788 /* TWI FIFO Receive Data Single Byte Register */ +#define TWI0_RCV_DATA16 0xffc0078c /* TWI FIFO Receive Data Double Byte Register */ + +/* SPORT0 is not defined in the shared file because it is not available on the ADSP-BF542 and ADSP-BF544 processors */ + +/* SPORT1 Registers */ + +#define SPORT1_TCR1 0xffc00900 /* SPORT1 Transmit Configuration 1 Register */ +#define SPORT1_TCR2 0xffc00904 /* SPORT1 Transmit Configuration 2 Register */ +#define SPORT1_TCLKDIV 0xffc00908 /* SPORT1 Transmit Serial Clock Divider Register */ +#define SPORT1_TFSDIV 0xffc0090c /* SPORT1 Transmit Frame Sync Divider Register */ +#define SPORT1_TX 0xffc00910 /* SPORT1 Transmit Data Register */ +#define SPORT1_RX 0xffc00918 /* SPORT1 Receive Data Register */ +#define SPORT1_RCR1 0xffc00920 /* SPORT1 Receive Configuration 1 Register */ +#define SPORT1_RCR2 0xffc00924 /* SPORT1 Receive Configuration 2 Register */ +#define SPORT1_RCLKDIV 0xffc00928 /* SPORT1 Receive Serial Clock Divider Register */ +#define SPORT1_RFSDIV 0xffc0092c /* SPORT1 Receive Frame Sync Divider Register */ +#define SPORT1_STAT 0xffc00930 /* SPORT1 Status Register */ +#define SPORT1_CHNL 0xffc00934 /* SPORT1 Current Channel Register */ +#define SPORT1_MCMC1 0xffc00938 /* SPORT1 Multi channel Configuration Register 1 */ +#define SPORT1_MCMC2 0xffc0093c /* SPORT1 Multi channel Configuration Register 2 */ +#define SPORT1_MTCS0 0xffc00940 /* SPORT1 Multi channel Transmit Select Register 0 */ +#define SPORT1_MTCS1 0xffc00944 /* SPORT1 Multi channel Transmit Select Register 1 */ +#define SPORT1_MTCS2 0xffc00948 /* SPORT1 Multi channel Transmit Select Register 2 */ +#define SPORT1_MTCS3 0xffc0094c /* SPORT1 Multi channel Transmit Select Register 3 */ +#define SPORT1_MRCS0 0xffc00950 /* SPORT1 Multi channel Receive Select Register 0 */ +#define SPORT1_MRCS1 0xffc00954 /* SPORT1 Multi channel Receive Select Register 1 */ +#define SPORT1_MRCS2 0xffc00958 /* SPORT1 Multi channel Receive Select Register 2 */ +#define SPORT1_MRCS3 0xffc0095c /* SPORT1 Multi channel Receive Select Register 3 */ + +/* Asynchronous Memory Control Registers */ + +#define EBIU_AMGCTL 0xffc00a00 /* Asynchronous Memory Global Control Register */ +#define EBIU_AMBCTL0 0xffc00a04 /* Asynchronous Memory Bank Control Register */ +#define EBIU_AMBCTL1 0xffc00a08 /* Asynchronous Memory Bank Control Register */ +#define EBIU_MBSCTL 0xffc00a0c /* Asynchronous Memory Bank Select Control Register */ +#define EBIU_ARBSTAT 0xffc00a10 /* Asynchronous Memory Arbiter Status Register */ +#define EBIU_MODE 0xffc00a14 /* Asynchronous Mode Control Register */ +#define EBIU_FCTL 0xffc00a18 /* Asynchronous Memory Flash Control Register */ + +/* DDR Memory Control Registers */ + +#define EBIU_DDRCTL0 0xffc00a20 /* DDR Memory Control 0 Register */ +#define EBIU_DDRCTL1 0xffc00a24 /* DDR Memory Control 1 Register */ +#define EBIU_DDRCTL2 0xffc00a28 /* DDR Memory Control 2 Register */ +#define EBIU_DDRCTL3 0xffc00a2c /* DDR Memory Control 3 Register */ +#define EBIU_DDRQUE 0xffc00a30 /* DDR Queue Configuration Register */ +#define EBIU_ERRADD 0xffc00a34 /* DDR Error Address Register */ +#define EBIU_ERRMST 0xffc00a38 /* DDR Error Master Register */ +#define EBIU_RSTCTL 0xffc00a3c /* DDR Reset Control Register */ + +/* DDR BankRead and Write Count Registers */ + +#define EBIU_DDRBRC0 0xffc00a60 /* DDR Bank0 Read Count Register */ +#define EBIU_DDRBRC1 0xffc00a64 /* DDR Bank1 Read Count Register */ +#define EBIU_DDRBRC2 0xffc00a68 /* DDR Bank2 Read Count Register */ +#define EBIU_DDRBRC3 0xffc00a6c /* DDR Bank3 Read Count Register */ +#define EBIU_DDRBRC4 0xffc00a70 /* DDR Bank4 Read Count Register */ +#define EBIU_DDRBRC5 0xffc00a74 /* DDR Bank5 Read Count Register */ +#define EBIU_DDRBRC6 0xffc00a78 /* DDR Bank6 Read Count Register */ +#define EBIU_DDRBRC7 0xffc00a7c /* DDR Bank7 Read Count Register */ +#define EBIU_DDRBWC0 0xffc00a80 /* DDR Bank0 Write Count Register */ +#define EBIU_DDRBWC1 0xffc00a84 /* DDR Bank1 Write Count Register */ +#define EBIU_DDRBWC2 0xffc00a88 /* DDR Bank2 Write Count Register */ +#define EBIU_DDRBWC3 0xffc00a8c /* DDR Bank3 Write Count Register */ +#define EBIU_DDRBWC4 0xffc00a90 /* DDR Bank4 Write Count Register */ +#define EBIU_DDRBWC5 0xffc00a94 /* DDR Bank5 Write Count Register */ +#define EBIU_DDRBWC6 0xffc00a98 /* DDR Bank6 Write Count Register */ +#define EBIU_DDRBWC7 0xffc00a9c /* DDR Bank7 Write Count Register */ +#define EBIU_DDRACCT 0xffc00aa0 /* DDR Activation Count Register */ +#define EBIU_DDRTACT 0xffc00aa8 /* DDR Turn Around Count Register */ +#define EBIU_DDRARCT 0xffc00aac /* DDR Auto-refresh Count Register */ +#define EBIU_DDRGC0 0xffc00ab0 /* DDR Grant Count 0 Register */ +#define EBIU_DDRGC1 0xffc00ab4 /* DDR Grant Count 1 Register */ +#define EBIU_DDRGC2 0xffc00ab8 /* DDR Grant Count 2 Register */ +#define EBIU_DDRGC3 0xffc00abc /* DDR Grant Count 3 Register */ +#define EBIU_DDRMCEN 0xffc00ac0 /* DDR Metrics Counter Enable Register */ +#define EBIU_DDRMCCL 0xffc00ac4 /* DDR Metrics Counter Clear Register */ + +/* DMAC0 Registers */ + +#define DMAC0_TCPER 0xffc00b0c /* DMA Controller 0 Traffic Control Periods Register */ +#define DMAC0_TCCNT 0xffc00b10 /* DMA Controller 0 Current Counts Register */ + +/* DMA Channel 0 Registers */ + +#define DMA0_NEXT_DESC_PTR 0xffc00c00 /* DMA Channel 0 Next Descriptor Pointer Register */ +#define DMA0_START_ADDR 0xffc00c04 /* DMA Channel 0 Start Address Register */ +#define DMA0_CONFIG 0xffc00c08 /* DMA Channel 0 Configuration Register */ +#define DMA0_X_COUNT 0xffc00c10 /* DMA Channel 0 X Count Register */ +#define DMA0_X_MODIFY 0xffc00c14 /* DMA Channel 0 X Modify Register */ +#define DMA0_Y_COUNT 0xffc00c18 /* DMA Channel 0 Y Count Register */ +#define DMA0_Y_MODIFY 0xffc00c1c /* DMA Channel 0 Y Modify Register */ +#define DMA0_CURR_DESC_PTR 0xffc00c20 /* DMA Channel 0 Current Descriptor Pointer Register */ +#define DMA0_CURR_ADDR 0xffc00c24 /* DMA Channel 0 Current Address Register */ +#define DMA0_IRQ_STATUS 0xffc00c28 /* DMA Channel 0 Interrupt/Status Register */ +#define DMA0_PERIPHERAL_MAP 0xffc00c2c /* DMA Channel 0 Peripheral Map Register */ +#define DMA0_CURR_X_COUNT 0xffc00c30 /* DMA Channel 0 Current X Count Register */ +#define DMA0_CURR_Y_COUNT 0xffc00c38 /* DMA Channel 0 Current Y Count Register */ + +/* DMA Channel 1 Registers */ + +#define DMA1_NEXT_DESC_PTR 0xffc00c40 /* DMA Channel 1 Next Descriptor Pointer Register */ +#define DMA1_START_ADDR 0xffc00c44 /* DMA Channel 1 Start Address Register */ +#define DMA1_CONFIG 0xffc00c48 /* DMA Channel 1 Configuration Register */ +#define DMA1_X_COUNT 0xffc00c50 /* DMA Channel 1 X Count Register */ +#define DMA1_X_MODIFY 0xffc00c54 /* DMA Channel 1 X Modify Register */ +#define DMA1_Y_COUNT 0xffc00c58 /* DMA Channel 1 Y Count Register */ +#define DMA1_Y_MODIFY 0xffc00c5c /* DMA Channel 1 Y Modify Register */ +#define DMA1_CURR_DESC_PTR 0xffc00c60 /* DMA Channel 1 Current Descriptor Pointer Register */ +#define DMA1_CURR_ADDR 0xffc00c64 /* DMA Channel 1 Current Address Register */ +#define DMA1_IRQ_STATUS 0xffc00c68 /* DMA Channel 1 Interrupt/Status Register */ +#define DMA1_PERIPHERAL_MAP 0xffc00c6c /* DMA Channel 1 Peripheral Map Register */ +#define DMA1_CURR_X_COUNT 0xffc00c70 /* DMA Channel 1 Current X Count Register */ +#define DMA1_CURR_Y_COUNT 0xffc00c78 /* DMA Channel 1 Current Y Count Register */ + +/* DMA Channel 2 Registers */ + +#define DMA2_NEXT_DESC_PTR 0xffc00c80 /* DMA Channel 2 Next Descriptor Pointer Register */ +#define DMA2_START_ADDR 0xffc00c84 /* DMA Channel 2 Start Address Register */ +#define DMA2_CONFIG 0xffc00c88 /* DMA Channel 2 Configuration Register */ +#define DMA2_X_COUNT 0xffc00c90 /* DMA Channel 2 X Count Register */ +#define DMA2_X_MODIFY 0xffc00c94 /* DMA Channel 2 X Modify Register */ +#define DMA2_Y_COUNT 0xffc00c98 /* DMA Channel 2 Y Count Register */ +#define DMA2_Y_MODIFY 0xffc00c9c /* DMA Channel 2 Y Modify Register */ +#define DMA2_CURR_DESC_PTR 0xffc00ca0 /* DMA Channel 2 Current Descriptor Pointer Register */ +#define DMA2_CURR_ADDR 0xffc00ca4 /* DMA Channel 2 Current Address Register */ +#define DMA2_IRQ_STATUS 0xffc00ca8 /* DMA Channel 2 Interrupt/Status Register */ +#define DMA2_PERIPHERAL_MAP 0xffc00cac /* DMA Channel 2 Peripheral Map Register */ +#define DMA2_CURR_X_COUNT 0xffc00cb0 /* DMA Channel 2 Current X Count Register */ +#define DMA2_CURR_Y_COUNT 0xffc00cb8 /* DMA Channel 2 Current Y Count Register */ + +/* DMA Channel 3 Registers */ + +#define DMA3_NEXT_DESC_PTR 0xffc00cc0 /* DMA Channel 3 Next Descriptor Pointer Register */ +#define DMA3_START_ADDR 0xffc00cc4 /* DMA Channel 3 Start Address Register */ +#define DMA3_CONFIG 0xffc00cc8 /* DMA Channel 3 Configuration Register */ +#define DMA3_X_COUNT 0xffc00cd0 /* DMA Channel 3 X Count Register */ +#define DMA3_X_MODIFY 0xffc00cd4 /* DMA Channel 3 X Modify Register */ +#define DMA3_Y_COUNT 0xffc00cd8 /* DMA Channel 3 Y Count Register */ +#define DMA3_Y_MODIFY 0xffc00cdc /* DMA Channel 3 Y Modify Register */ +#define DMA3_CURR_DESC_PTR 0xffc00ce0 /* DMA Channel 3 Current Descriptor Pointer Register */ +#define DMA3_CURR_ADDR 0xffc00ce4 /* DMA Channel 3 Current Address Register */ +#define DMA3_IRQ_STATUS 0xffc00ce8 /* DMA Channel 3 Interrupt/Status Register */ +#define DMA3_PERIPHERAL_MAP 0xffc00cec /* DMA Channel 3 Peripheral Map Register */ +#define DMA3_CURR_X_COUNT 0xffc00cf0 /* DMA Channel 3 Current X Count Register */ +#define DMA3_CURR_Y_COUNT 0xffc00cf8 /* DMA Channel 3 Current Y Count Register */ + +/* DMA Channel 4 Registers */ + +#define DMA4_NEXT_DESC_PTR 0xffc00d00 /* DMA Channel 4 Next Descriptor Pointer Register */ +#define DMA4_START_ADDR 0xffc00d04 /* DMA Channel 4 Start Address Register */ +#define DMA4_CONFIG 0xffc00d08 /* DMA Channel 4 Configuration Register */ +#define DMA4_X_COUNT 0xffc00d10 /* DMA Channel 4 X Count Register */ +#define DMA4_X_MODIFY 0xffc00d14 /* DMA Channel 4 X Modify Register */ +#define DMA4_Y_COUNT 0xffc00d18 /* DMA Channel 4 Y Count Register */ +#define DMA4_Y_MODIFY 0xffc00d1c /* DMA Channel 4 Y Modify Register */ +#define DMA4_CURR_DESC_PTR 0xffc00d20 /* DMA Channel 4 Current Descriptor Pointer Register */ +#define DMA4_CURR_ADDR 0xffc00d24 /* DMA Channel 4 Current Address Register */ +#define DMA4_IRQ_STATUS 0xffc00d28 /* DMA Channel 4 Interrupt/Status Register */ +#define DMA4_PERIPHERAL_MAP 0xffc00d2c /* DMA Channel 4 Peripheral Map Register */ +#define DMA4_CURR_X_COUNT 0xffc00d30 /* DMA Channel 4 Current X Count Register */ +#define DMA4_CURR_Y_COUNT 0xffc00d38 /* DMA Channel 4 Current Y Count Register */ + +/* DMA Channel 5 Registers */ + +#define DMA5_NEXT_DESC_PTR 0xffc00d40 /* DMA Channel 5 Next Descriptor Pointer Register */ +#define DMA5_START_ADDR 0xffc00d44 /* DMA Channel 5 Start Address Register */ +#define DMA5_CONFIG 0xffc00d48 /* DMA Channel 5 Configuration Register */ +#define DMA5_X_COUNT 0xffc00d50 /* DMA Channel 5 X Count Register */ +#define DMA5_X_MODIFY 0xffc00d54 /* DMA Channel 5 X Modify Register */ +#define DMA5_Y_COUNT 0xffc00d58 /* DMA Channel 5 Y Count Register */ +#define DMA5_Y_MODIFY 0xffc00d5c /* DMA Channel 5 Y Modify Register */ +#define DMA5_CURR_DESC_PTR 0xffc00d60 /* DMA Channel 5 Current Descriptor Pointer Register */ +#define DMA5_CURR_ADDR 0xffc00d64 /* DMA Channel 5 Current Address Register */ +#define DMA5_IRQ_STATUS 0xffc00d68 /* DMA Channel 5 Interrupt/Status Register */ +#define DMA5_PERIPHERAL_MAP 0xffc00d6c /* DMA Channel 5 Peripheral Map Register */ +#define DMA5_CURR_X_COUNT 0xffc00d70 /* DMA Channel 5 Current X Count Register */ +#define DMA5_CURR_Y_COUNT 0xffc00d78 /* DMA Channel 5 Current Y Count Register */ + +/* DMA Channel 6 Registers */ + +#define DMA6_NEXT_DESC_PTR 0xffc00d80 /* DMA Channel 6 Next Descriptor Pointer Register */ +#define DMA6_START_ADDR 0xffc00d84 /* DMA Channel 6 Start Address Register */ +#define DMA6_CONFIG 0xffc00d88 /* DMA Channel 6 Configuration Register */ +#define DMA6_X_COUNT 0xffc00d90 /* DMA Channel 6 X Count Register */ +#define DMA6_X_MODIFY 0xffc00d94 /* DMA Channel 6 X Modify Register */ +#define DMA6_Y_COUNT 0xffc00d98 /* DMA Channel 6 Y Count Register */ +#define DMA6_Y_MODIFY 0xffc00d9c /* DMA Channel 6 Y Modify Register */ +#define DMA6_CURR_DESC_PTR 0xffc00da0 /* DMA Channel 6 Current Descriptor Pointer Register */ +#define DMA6_CURR_ADDR 0xffc00da4 /* DMA Channel 6 Current Address Register */ +#define DMA6_IRQ_STATUS 0xffc00da8 /* DMA Channel 6 Interrupt/Status Register */ +#define DMA6_PERIPHERAL_MAP 0xffc00dac /* DMA Channel 6 Peripheral Map Register */ +#define DMA6_CURR_X_COUNT 0xffc00db0 /* DMA Channel 6 Current X Count Register */ +#define DMA6_CURR_Y_COUNT 0xffc00db8 /* DMA Channel 6 Current Y Count Register */ + +/* DMA Channel 7 Registers */ + +#define DMA7_NEXT_DESC_PTR 0xffc00dc0 /* DMA Channel 7 Next Descriptor Pointer Register */ +#define DMA7_START_ADDR 0xffc00dc4 /* DMA Channel 7 Start Address Register */ +#define DMA7_CONFIG 0xffc00dc8 /* DMA Channel 7 Configuration Register */ +#define DMA7_X_COUNT 0xffc00dd0 /* DMA Channel 7 X Count Register */ +#define DMA7_X_MODIFY 0xffc00dd4 /* DMA Channel 7 X Modify Register */ +#define DMA7_Y_COUNT 0xffc00dd8 /* DMA Channel 7 Y Count Register */ +#define DMA7_Y_MODIFY 0xffc00ddc /* DMA Channel 7 Y Modify Register */ +#define DMA7_CURR_DESC_PTR 0xffc00de0 /* DMA Channel 7 Current Descriptor Pointer Register */ +#define DMA7_CURR_ADDR 0xffc00de4 /* DMA Channel 7 Current Address Register */ +#define DMA7_IRQ_STATUS 0xffc00de8 /* DMA Channel 7 Interrupt/Status Register */ +#define DMA7_PERIPHERAL_MAP 0xffc00dec /* DMA Channel 7 Peripheral Map Register */ +#define DMA7_CURR_X_COUNT 0xffc00df0 /* DMA Channel 7 Current X Count Register */ +#define DMA7_CURR_Y_COUNT 0xffc00df8 /* DMA Channel 7 Current Y Count Register */ + +/* DMA Channel 8 Registers */ + +#define DMA8_NEXT_DESC_PTR 0xffc00e00 /* DMA Channel 8 Next Descriptor Pointer Register */ +#define DMA8_START_ADDR 0xffc00e04 /* DMA Channel 8 Start Address Register */ +#define DMA8_CONFIG 0xffc00e08 /* DMA Channel 8 Configuration Register */ +#define DMA8_X_COUNT 0xffc00e10 /* DMA Channel 8 X Count Register */ +#define DMA8_X_MODIFY 0xffc00e14 /* DMA Channel 8 X Modify Register */ +#define DMA8_Y_COUNT 0xffc00e18 /* DMA Channel 8 Y Count Register */ +#define DMA8_Y_MODIFY 0xffc00e1c /* DMA Channel 8 Y Modify Register */ +#define DMA8_CURR_DESC_PTR 0xffc00e20 /* DMA Channel 8 Current Descriptor Pointer Register */ +#define DMA8_CURR_ADDR 0xffc00e24 /* DMA Channel 8 Current Address Register */ +#define DMA8_IRQ_STATUS 0xffc00e28 /* DMA Channel 8 Interrupt/Status Register */ +#define DMA8_PERIPHERAL_MAP 0xffc00e2c /* DMA Channel 8 Peripheral Map Register */ +#define DMA8_CURR_X_COUNT 0xffc00e30 /* DMA Channel 8 Current X Count Register */ +#define DMA8_CURR_Y_COUNT 0xffc00e38 /* DMA Channel 8 Current Y Count Register */ + +/* DMA Channel 9 Registers */ + +#define DMA9_NEXT_DESC_PTR 0xffc00e40 /* DMA Channel 9 Next Descriptor Pointer Register */ +#define DMA9_START_ADDR 0xffc00e44 /* DMA Channel 9 Start Address Register */ +#define DMA9_CONFIG 0xffc00e48 /* DMA Channel 9 Configuration Register */ +#define DMA9_X_COUNT 0xffc00e50 /* DMA Channel 9 X Count Register */ +#define DMA9_X_MODIFY 0xffc00e54 /* DMA Channel 9 X Modify Register */ +#define DMA9_Y_COUNT 0xffc00e58 /* DMA Channel 9 Y Count Register */ +#define DMA9_Y_MODIFY 0xffc00e5c /* DMA Channel 9 Y Modify Register */ +#define DMA9_CURR_DESC_PTR 0xffc00e60 /* DMA Channel 9 Current Descriptor Pointer Register */ +#define DMA9_CURR_ADDR 0xffc00e64 /* DMA Channel 9 Current Address Register */ +#define DMA9_IRQ_STATUS 0xffc00e68 /* DMA Channel 9 Interrupt/Status Register */ +#define DMA9_PERIPHERAL_MAP 0xffc00e6c /* DMA Channel 9 Peripheral Map Register */ +#define DMA9_CURR_X_COUNT 0xffc00e70 /* DMA Channel 9 Current X Count Register */ +#define DMA9_CURR_Y_COUNT 0xffc00e78 /* DMA Channel 9 Current Y Count Register */ + +/* DMA Channel 10 Registers */ + +#define DMA10_NEXT_DESC_PTR 0xffc00e80 /* DMA Channel 10 Next Descriptor Pointer Register */ +#define DMA10_START_ADDR 0xffc00e84 /* DMA Channel 10 Start Address Register */ +#define DMA10_CONFIG 0xffc00e88 /* DMA Channel 10 Configuration Register */ +#define DMA10_X_COUNT 0xffc00e90 /* DMA Channel 10 X Count Register */ +#define DMA10_X_MODIFY 0xffc00e94 /* DMA Channel 10 X Modify Register */ +#define DMA10_Y_COUNT 0xffc00e98 /* DMA Channel 10 Y Count Register */ +#define DMA10_Y_MODIFY 0xffc00e9c /* DMA Channel 10 Y Modify Register */ +#define DMA10_CURR_DESC_PTR 0xffc00ea0 /* DMA Channel 10 Current Descriptor Pointer Register */ +#define DMA10_CURR_ADDR 0xffc00ea4 /* DMA Channel 10 Current Address Register */ +#define DMA10_IRQ_STATUS 0xffc00ea8 /* DMA Channel 10 Interrupt/Status Register */ +#define DMA10_PERIPHERAL_MAP 0xffc00eac /* DMA Channel 10 Peripheral Map Register */ +#define DMA10_CURR_X_COUNT 0xffc00eb0 /* DMA Channel 10 Current X Count Register */ +#define DMA10_CURR_Y_COUNT 0xffc00eb8 /* DMA Channel 10 Current Y Count Register */ + +/* DMA Channel 11 Registers */ + +#define DMA11_NEXT_DESC_PTR 0xffc00ec0 /* DMA Channel 11 Next Descriptor Pointer Register */ +#define DMA11_START_ADDR 0xffc00ec4 /* DMA Channel 11 Start Address Register */ +#define DMA11_CONFIG 0xffc00ec8 /* DMA Channel 11 Configuration Register */ +#define DMA11_X_COUNT 0xffc00ed0 /* DMA Channel 11 X Count Register */ +#define DMA11_X_MODIFY 0xffc00ed4 /* DMA Channel 11 X Modify Register */ +#define DMA11_Y_COUNT 0xffc00ed8 /* DMA Channel 11 Y Count Register */ +#define DMA11_Y_MODIFY 0xffc00edc /* DMA Channel 11 Y Modify Register */ +#define DMA11_CURR_DESC_PTR 0xffc00ee0 /* DMA Channel 11 Current Descriptor Pointer Register */ +#define DMA11_CURR_ADDR 0xffc00ee4 /* DMA Channel 11 Current Address Register */ +#define DMA11_IRQ_STATUS 0xffc00ee8 /* DMA Channel 11 Interrupt/Status Register */ +#define DMA11_PERIPHERAL_MAP 0xffc00eec /* DMA Channel 11 Peripheral Map Register */ +#define DMA11_CURR_X_COUNT 0xffc00ef0 /* DMA Channel 11 Current X Count Register */ +#define DMA11_CURR_Y_COUNT 0xffc00ef8 /* DMA Channel 11 Current Y Count Register */ + +/* MDMA Stream 0 Registers */ + +#define MDMA_D0_NEXT_DESC_PTR 0xffc00f00 /* Memory DMA Stream 0 Destination Next Descriptor Pointer Register */ +#define MDMA_D0_START_ADDR 0xffc00f04 /* Memory DMA Stream 0 Destination Start Address Register */ +#define MDMA_D0_CONFIG 0xffc00f08 /* Memory DMA Stream 0 Destination Configuration Register */ +#define MDMA_D0_X_COUNT 0xffc00f10 /* Memory DMA Stream 0 Destination X Count Register */ +#define MDMA_D0_X_MODIFY 0xffc00f14 /* Memory DMA Stream 0 Destination X Modify Register */ +#define MDMA_D0_Y_COUNT 0xffc00f18 /* Memory DMA Stream 0 Destination Y Count Register */ +#define MDMA_D0_Y_MODIFY 0xffc00f1c /* Memory DMA Stream 0 Destination Y Modify Register */ +#define MDMA_D0_CURR_DESC_PTR 0xffc00f20 /* Memory DMA Stream 0 Destination Current Descriptor Pointer Register */ +#define MDMA_D0_CURR_ADDR 0xffc00f24 /* Memory DMA Stream 0 Destination Current Address Register */ +#define MDMA_D0_IRQ_STATUS 0xffc00f28 /* Memory DMA Stream 0 Destination Interrupt/Status Register */ +#define MDMA_D0_PERIPHERAL_MAP 0xffc00f2c /* Memory DMA Stream 0 Destination Peripheral Map Register */ +#define MDMA_D0_CURR_X_COUNT 0xffc00f30 /* Memory DMA Stream 0 Destination Current X Count Register */ +#define MDMA_D0_CURR_Y_COUNT 0xffc00f38 /* Memory DMA Stream 0 Destination Current Y Count Register */ +#define MDMA_S0_NEXT_DESC_PTR 0xffc00f40 /* Memory DMA Stream 0 Source Next Descriptor Pointer Register */ +#define MDMA_S0_START_ADDR 0xffc00f44 /* Memory DMA Stream 0 Source Start Address Register */ +#define MDMA_S0_CONFIG 0xffc00f48 /* Memory DMA Stream 0 Source Configuration Register */ +#define MDMA_S0_X_COUNT 0xffc00f50 /* Memory DMA Stream 0 Source X Count Register */ +#define MDMA_S0_X_MODIFY 0xffc00f54 /* Memory DMA Stream 0 Source X Modify Register */ +#define MDMA_S0_Y_COUNT 0xffc00f58 /* Memory DMA Stream 0 Source Y Count Register */ +#define MDMA_S0_Y_MODIFY 0xffc00f5c /* Memory DMA Stream 0 Source Y Modify Register */ +#define MDMA_S0_CURR_DESC_PTR 0xffc00f60 /* Memory DMA Stream 0 Source Current Descriptor Pointer Register */ +#define MDMA_S0_CURR_ADDR 0xffc00f64 /* Memory DMA Stream 0 Source Current Address Register */ +#define MDMA_S0_IRQ_STATUS 0xffc00f68 /* Memory DMA Stream 0 Source Interrupt/Status Register */ +#define MDMA_S0_PERIPHERAL_MAP 0xffc00f6c /* Memory DMA Stream 0 Source Peripheral Map Register */ +#define MDMA_S0_CURR_X_COUNT 0xffc00f70 /* Memory DMA Stream 0 Source Current X Count Register */ +#define MDMA_S0_CURR_Y_COUNT 0xffc00f78 /* Memory DMA Stream 0 Source Current Y Count Register */ + +/* MDMA Stream 1 Registers */ + +#define MDMA_D1_NEXT_DESC_PTR 0xffc00f80 /* Memory DMA Stream 1 Destination Next Descriptor Pointer Register */ +#define MDMA_D1_START_ADDR 0xffc00f84 /* Memory DMA Stream 1 Destination Start Address Register */ +#define MDMA_D1_CONFIG 0xffc00f88 /* Memory DMA Stream 1 Destination Configuration Register */ +#define MDMA_D1_X_COUNT 0xffc00f90 /* Memory DMA Stream 1 Destination X Count Register */ +#define MDMA_D1_X_MODIFY 0xffc00f94 /* Memory DMA Stream 1 Destination X Modify Register */ +#define MDMA_D1_Y_COUNT 0xffc00f98 /* Memory DMA Stream 1 Destination Y Count Register */ +#define MDMA_D1_Y_MODIFY 0xffc00f9c /* Memory DMA Stream 1 Destination Y Modify Register */ +#define MDMA_D1_CURR_DESC_PTR 0xffc00fa0 /* Memory DMA Stream 1 Destination Current Descriptor Pointer Register */ +#define MDMA_D1_CURR_ADDR 0xffc00fa4 /* Memory DMA Stream 1 Destination Current Address Register */ +#define MDMA_D1_IRQ_STATUS 0xffc00fa8 /* Memory DMA Stream 1 Destination Interrupt/Status Register */ +#define MDMA_D1_PERIPHERAL_MAP 0xffc00fac /* Memory DMA Stream 1 Destination Peripheral Map Register */ +#define MDMA_D1_CURR_X_COUNT 0xffc00fb0 /* Memory DMA Stream 1 Destination Current X Count Register */ +#define MDMA_D1_CURR_Y_COUNT 0xffc00fb8 /* Memory DMA Stream 1 Destination Current Y Count Register */ +#define MDMA_S1_NEXT_DESC_PTR 0xffc00fc0 /* Memory DMA Stream 1 Source Next Descriptor Pointer Register */ +#define MDMA_S1_START_ADDR 0xffc00fc4 /* Memory DMA Stream 1 Source Start Address Register */ +#define MDMA_S1_CONFIG 0xffc00fc8 /* Memory DMA Stream 1 Source Configuration Register */ +#define MDMA_S1_X_COUNT 0xffc00fd0 /* Memory DMA Stream 1 Source X Count Register */ +#define MDMA_S1_X_MODIFY 0xffc00fd4 /* Memory DMA Stream 1 Source X Modify Register */ +#define MDMA_S1_Y_COUNT 0xffc00fd8 /* Memory DMA Stream 1 Source Y Count Register */ +#define MDMA_S1_Y_MODIFY 0xffc00fdc /* Memory DMA Stream 1 Source Y Modify Register */ +#define MDMA_S1_CURR_DESC_PTR 0xffc00fe0 /* Memory DMA Stream 1 Source Current Descriptor Pointer Register */ +#define MDMA_S1_CURR_ADDR 0xffc00fe4 /* Memory DMA Stream 1 Source Current Address Register */ +#define MDMA_S1_IRQ_STATUS 0xffc00fe8 /* Memory DMA Stream 1 Source Interrupt/Status Register */ +#define MDMA_S1_PERIPHERAL_MAP 0xffc00fec /* Memory DMA Stream 1 Source Peripheral Map Register */ +#define MDMA_S1_CURR_X_COUNT 0xffc00ff0 /* Memory DMA Stream 1 Source Current X Count Register */ +#define MDMA_S1_CURR_Y_COUNT 0xffc00ff8 /* Memory DMA Stream 1 Source Current Y Count Register */ + +/* UART3 Registers */ + +#define UART3_DLL 0xffc03100 /* Divisor Latch Low Byte */ +#define UART3_DLH 0xffc03104 /* Divisor Latch High Byte */ +#define UART3_GCTL 0xffc03108 /* Global Control Register */ +#define UART3_LCR 0xffc0310c /* Line Control Register */ +#define UART3_MCR 0xffc03110 /* Modem Control Register */ +#define UART3_LSR 0xffc03114 /* Line Status Register */ +#define UART3_MSR 0xffc03118 /* Modem Status Register */ +#define UART3_SCR 0xffc0311c /* Scratch Register */ +#define UART3_IER_SET 0xffc03120 /* Interrupt Enable Register Set */ +#define UART3_IER_CLEAR 0xffc03124 /* Interrupt Enable Register Clear */ +#define UART3_THR 0xffc03128 /* Transmit Hold Register */ +#define UART3_RBR 0xffc0312c /* Receive Buffer Register */ + +/* EPPI1 Registers */ + +#define EPPI1_STATUS 0xffc01300 /* EPPI1 Status Register */ +#define EPPI1_HCOUNT 0xffc01304 /* EPPI1 Horizontal Transfer Count Register */ +#define EPPI1_HDELAY 0xffc01308 /* EPPI1 Horizontal Delay Count Register */ +#define EPPI1_VCOUNT 0xffc0130c /* EPPI1 Vertical Transfer Count Register */ +#define EPPI1_VDELAY 0xffc01310 /* EPPI1 Vertical Delay Count Register */ +#define EPPI1_FRAME 0xffc01314 /* EPPI1 Lines per Frame Register */ +#define EPPI1_LINE 0xffc01318 /* EPPI1 Samples per Line Register */ +#define EPPI1_CLKDIV 0xffc0131c /* EPPI1 Clock Divide Register */ +#define EPPI1_CONTROL 0xffc01320 /* EPPI1 Control Register */ +#define EPPI1_FS1W_HBL 0xffc01324 /* EPPI1 FS1 Width Register / EPPI1 Horizontal Blanking Samples Per Line Register */ +#define EPPI1_FS1P_AVPL 0xffc01328 /* EPPI1 FS1 Period Register / EPPI1 Active Video Samples Per Line Register */ +#define EPPI1_FS2W_LVB 0xffc0132c /* EPPI1 FS2 Width Register / EPPI1 Lines of Vertical Blanking Register */ +#define EPPI1_FS2P_LAVF 0xffc01330 /* EPPI1 FS2 Period Register/ EPPI1 Lines of Active Video Per Field Register */ +#define EPPI1_CLIP 0xffc01334 /* EPPI1 Clipping Register */ + +/* Port Interrupt 0 Registers (32-bit) */ + +#define PINT0_MASK_SET 0xffc01400 /* Pin Interrupt 0 Mask Set Register */ +#define PINT0_MASK_CLEAR 0xffc01404 /* Pin Interrupt 0 Mask Clear Register */ +#define PINT0_REQUEST 0xffc01408 /* Pin Interrupt 0 Interrupt Request Register */ +#define PINT0_ASSIGN 0xffc0140c /* Pin Interrupt 0 Port Assign Register */ +#define PINT0_EDGE_SET 0xffc01410 /* Pin Interrupt 0 Edge-sensitivity Set Register */ +#define PINT0_EDGE_CLEAR 0xffc01414 /* Pin Interrupt 0 Edge-sensitivity Clear Register */ +#define PINT0_INVERT_SET 0xffc01418 /* Pin Interrupt 0 Inversion Set Register */ +#define PINT0_INVERT_CLEAR 0xffc0141c /* Pin Interrupt 0 Inversion Clear Register */ +#define PINT0_PINSTATE 0xffc01420 /* Pin Interrupt 0 Pin Status Register */ +#define PINT0_LATCH 0xffc01424 /* Pin Interrupt 0 Latch Register */ + +/* Port Interrupt 1 Registers (32-bit) */ + +#define PINT1_MASK_SET 0xffc01430 /* Pin Interrupt 1 Mask Set Register */ +#define PINT1_MASK_CLEAR 0xffc01434 /* Pin Interrupt 1 Mask Clear Register */ +#define PINT1_REQUEST 0xffc01438 /* Pin Interrupt 1 Interrupt Request Register */ +#define PINT1_ASSIGN 0xffc0143c /* Pin Interrupt 1 Port Assign Register */ +#define PINT1_EDGE_SET 0xffc01440 /* Pin Interrupt 1 Edge-sensitivity Set Register */ +#define PINT1_EDGE_CLEAR 0xffc01444 /* Pin Interrupt 1 Edge-sensitivity Clear Register */ +#define PINT1_INVERT_SET 0xffc01448 /* Pin Interrupt 1 Inversion Set Register */ +#define PINT1_INVERT_CLEAR 0xffc0144c /* Pin Interrupt 1 Inversion Clear Register */ +#define PINT1_PINSTATE 0xffc01450 /* Pin Interrupt 1 Pin Status Register */ +#define PINT1_LATCH 0xffc01454 /* Pin Interrupt 1 Latch Register */ + +/* Port Interrupt 2 Registers (32-bit) */ + +#define PINT2_MASK_SET 0xffc01460 /* Pin Interrupt 2 Mask Set Register */ +#define PINT2_MASK_CLEAR 0xffc01464 /* Pin Interrupt 2 Mask Clear Register */ +#define PINT2_REQUEST 0xffc01468 /* Pin Interrupt 2 Interrupt Request Register */ +#define PINT2_ASSIGN 0xffc0146c /* Pin Interrupt 2 Port Assign Register */ +#define PINT2_EDGE_SET 0xffc01470 /* Pin Interrupt 2 Edge-sensitivity Set Register */ +#define PINT2_EDGE_CLEAR 0xffc01474 /* Pin Interrupt 2 Edge-sensitivity Clear Register */ +#define PINT2_INVERT_SET 0xffc01478 /* Pin Interrupt 2 Inversion Set Register */ +#define PINT2_INVERT_CLEAR 0xffc0147c /* Pin Interrupt 2 Inversion Clear Register */ +#define PINT2_PINSTATE 0xffc01480 /* Pin Interrupt 2 Pin Status Register */ +#define PINT2_LATCH 0xffc01484 /* Pin Interrupt 2 Latch Register */ + +/* Port Interrupt 3 Registers (32-bit) */ + +#define PINT3_MASK_SET 0xffc01490 /* Pin Interrupt 3 Mask Set Register */ +#define PINT3_MASK_CLEAR 0xffc01494 /* Pin Interrupt 3 Mask Clear Register */ +#define PINT3_REQUEST 0xffc01498 /* Pin Interrupt 3 Interrupt Request Register */ +#define PINT3_ASSIGN 0xffc0149c /* Pin Interrupt 3 Port Assign Register */ +#define PINT3_EDGE_SET 0xffc014a0 /* Pin Interrupt 3 Edge-sensitivity Set Register */ +#define PINT3_EDGE_CLEAR 0xffc014a4 /* Pin Interrupt 3 Edge-sensitivity Clear Register */ +#define PINT3_INVERT_SET 0xffc014a8 /* Pin Interrupt 3 Inversion Set Register */ +#define PINT3_INVERT_CLEAR 0xffc014ac /* Pin Interrupt 3 Inversion Clear Register */ +#define PINT3_PINSTATE 0xffc014b0 /* Pin Interrupt 3 Pin Status Register */ +#define PINT3_LATCH 0xffc014b4 /* Pin Interrupt 3 Latch Register */ + +/* Port A Registers */ + +#define PORTA_FER 0xffc014c0 /* Function Enable Register */ +#define PORTA 0xffc014c4 /* GPIO Data Register */ +#define PORTA_SET 0xffc014c8 /* GPIO Data Set Register */ +#define PORTA_CLEAR 0xffc014cc /* GPIO Data Clear Register */ +#define PORTA_DIR_SET 0xffc014d0 /* GPIO Direction Set Register */ +#define PORTA_DIR_CLEAR 0xffc014d4 /* GPIO Direction Clear Register */ +#define PORTA_INEN 0xffc014d8 /* GPIO Input Enable Register */ +#define PORTA_MUX 0xffc014dc /* Multiplexer Control Register */ + +/* Port B Registers */ + +#define PORTB_FER 0xffc014e0 /* Function Enable Register */ +#define PORTB 0xffc014e4 /* GPIO Data Register */ +#define PORTB_SET 0xffc014e8 /* GPIO Data Set Register */ +#define PORTB_CLEAR 0xffc014ec /* GPIO Data Clear Register */ +#define PORTB_DIR_SET 0xffc014f0 /* GPIO Direction Set Register */ +#define PORTB_DIR_CLEAR 0xffc014f4 /* GPIO Direction Clear Register */ +#define PORTB_INEN 0xffc014f8 /* GPIO Input Enable Register */ +#define PORTB_MUX 0xffc014fc /* Multiplexer Control Register */ + +/* Port C Registers */ + +#define PORTC_FER 0xffc01500 /* Function Enable Register */ +#define PORTC 0xffc01504 /* GPIO Data Register */ +#define PORTC_SET 0xffc01508 /* GPIO Data Set Register */ +#define PORTC_CLEAR 0xffc0150c /* GPIO Data Clear Register */ +#define PORTC_DIR_SET 0xffc01510 /* GPIO Direction Set Register */ +#define PORTC_DIR_CLEAR 0xffc01514 /* GPIO Direction Clear Register */ +#define PORTC_INEN 0xffc01518 /* GPIO Input Enable Register */ +#define PORTC_MUX 0xffc0151c /* Multiplexer Control Register */ + +/* Port D Registers */ + +#define PORTD_FER 0xffc01520 /* Function Enable Register */ +#define PORTD 0xffc01524 /* GPIO Data Register */ +#define PORTD_SET 0xffc01528 /* GPIO Data Set Register */ +#define PORTD_CLEAR 0xffc0152c /* GPIO Data Clear Register */ +#define PORTD_DIR_SET 0xffc01530 /* GPIO Direction Set Register */ +#define PORTD_DIR_CLEAR 0xffc01534 /* GPIO Direction Clear Register */ +#define PORTD_INEN 0xffc01538 /* GPIO Input Enable Register */ +#define PORTD_MUX 0xffc0153c /* Multiplexer Control Register */ + +/* Port E Registers */ + +#define PORTE_FER 0xffc01540 /* Function Enable Register */ +#define PORTE 0xffc01544 /* GPIO Data Register */ +#define PORTE_SET 0xffc01548 /* GPIO Data Set Register */ +#define PORTE_CLEAR 0xffc0154c /* GPIO Data Clear Register */ +#define PORTE_DIR_SET 0xffc01550 /* GPIO Direction Set Register */ +#define PORTE_DIR_CLEAR 0xffc01554 /* GPIO Direction Clear Register */ +#define PORTE_INEN 0xffc01558 /* GPIO Input Enable Register */ +#define PORTE_MUX 0xffc0155c /* Multiplexer Control Register */ + +/* Port F Registers */ + +#define PORTF_FER 0xffc01560 /* Function Enable Register */ +#define PORTF 0xffc01564 /* GPIO Data Register */ +#define PORTF_SET 0xffc01568 /* GPIO Data Set Register */ +#define PORTF_CLEAR 0xffc0156c /* GPIO Data Clear Register */ +#define PORTF_DIR_SET 0xffc01570 /* GPIO Direction Set Register */ +#define PORTF_DIR_CLEAR 0xffc01574 /* GPIO Direction Clear Register */ +#define PORTF_INEN 0xffc01578 /* GPIO Input Enable Register */ +#define PORTF_MUX 0xffc0157c /* Multiplexer Control Register */ + +/* Port G Registers */ + +#define PORTG_FER 0xffc01580 /* Function Enable Register */ +#define PORTG 0xffc01584 /* GPIO Data Register */ +#define PORTG_SET 0xffc01588 /* GPIO Data Set Register */ +#define PORTG_CLEAR 0xffc0158c /* GPIO Data Clear Register */ +#define PORTG_DIR_SET 0xffc01590 /* GPIO Direction Set Register */ +#define PORTG_DIR_CLEAR 0xffc01594 /* GPIO Direction Clear Register */ +#define PORTG_INEN 0xffc01598 /* GPIO Input Enable Register */ +#define PORTG_MUX 0xffc0159c /* Multiplexer Control Register */ + +/* Port H Registers */ + +#define PORTH_FER 0xffc015a0 /* Function Enable Register */ +#define PORTH 0xffc015a4 /* GPIO Data Register */ +#define PORTH_SET 0xffc015a8 /* GPIO Data Set Register */ +#define PORTH_CLEAR 0xffc015ac /* GPIO Data Clear Register */ +#define PORTH_DIR_SET 0xffc015b0 /* GPIO Direction Set Register */ +#define PORTH_DIR_CLEAR 0xffc015b4 /* GPIO Direction Clear Register */ +#define PORTH_INEN 0xffc015b8 /* GPIO Input Enable Register */ +#define PORTH_MUX 0xffc015bc /* Multiplexer Control Register */ + +/* Port I Registers */ + +#define PORTI_FER 0xffc015c0 /* Function Enable Register */ +#define PORTI 0xffc015c4 /* GPIO Data Register */ +#define PORTI_SET 0xffc015c8 /* GPIO Data Set Register */ +#define PORTI_CLEAR 0xffc015cc /* GPIO Data Clear Register */ +#define PORTI_DIR_SET 0xffc015d0 /* GPIO Direction Set Register */ +#define PORTI_DIR_CLEAR 0xffc015d4 /* GPIO Direction Clear Register */ +#define PORTI_INEN 0xffc015d8 /* GPIO Input Enable Register */ +#define PORTI_MUX 0xffc015dc /* Multiplexer Control Register */ + +/* Port J Registers */ + +#define PORTJ_FER 0xffc015e0 /* Function Enable Register */ +#define PORTJ 0xffc015e4 /* GPIO Data Register */ +#define PORTJ_SET 0xffc015e8 /* GPIO Data Set Register */ +#define PORTJ_CLEAR 0xffc015ec /* GPIO Data Clear Register */ +#define PORTJ_DIR_SET 0xffc015f0 /* GPIO Direction Set Register */ +#define PORTJ_DIR_CLEAR 0xffc015f4 /* GPIO Direction Clear Register */ +#define PORTJ_INEN 0xffc015f8 /* GPIO Input Enable Register */ +#define PORTJ_MUX 0xffc015fc /* Multiplexer Control Register */ + +/* PWM Timer Registers */ + +#define TIMER0_CONFIG 0xffc01600 /* Timer 0 Configuration Register */ +#define TIMER0_COUNTER 0xffc01604 /* Timer 0 Counter Register */ +#define TIMER0_PERIOD 0xffc01608 /* Timer 0 Period Register */ +#define TIMER0_WIDTH 0xffc0160c /* Timer 0 Width Register */ +#define TIMER1_CONFIG 0xffc01610 /* Timer 1 Configuration Register */ +#define TIMER1_COUNTER 0xffc01614 /* Timer 1 Counter Register */ +#define TIMER1_PERIOD 0xffc01618 /* Timer 1 Period Register */ +#define TIMER1_WIDTH 0xffc0161c /* Timer 1 Width Register */ +#define TIMER2_CONFIG 0xffc01620 /* Timer 2 Configuration Register */ +#define TIMER2_COUNTER 0xffc01624 /* Timer 2 Counter Register */ +#define TIMER2_PERIOD 0xffc01628 /* Timer 2 Period Register */ +#define TIMER2_WIDTH 0xffc0162c /* Timer 2 Width Register */ +#define TIMER3_CONFIG 0xffc01630 /* Timer 3 Configuration Register */ +#define TIMER3_COUNTER 0xffc01634 /* Timer 3 Counter Register */ +#define TIMER3_PERIOD 0xffc01638 /* Timer 3 Period Register */ +#define TIMER3_WIDTH 0xffc0163c /* Timer 3 Width Register */ +#define TIMER4_CONFIG 0xffc01640 /* Timer 4 Configuration Register */ +#define TIMER4_COUNTER 0xffc01644 /* Timer 4 Counter Register */ +#define TIMER4_PERIOD 0xffc01648 /* Timer 4 Period Register */ +#define TIMER4_WIDTH 0xffc0164c /* Timer 4 Width Register */ +#define TIMER5_CONFIG 0xffc01650 /* Timer 5 Configuration Register */ +#define TIMER5_COUNTER 0xffc01654 /* Timer 5 Counter Register */ +#define TIMER5_PERIOD 0xffc01658 /* Timer 5 Period Register */ +#define TIMER5_WIDTH 0xffc0165c /* Timer 5 Width Register */ +#define TIMER6_CONFIG 0xffc01660 /* Timer 6 Configuration Register */ +#define TIMER6_COUNTER 0xffc01664 /* Timer 6 Counter Register */ +#define TIMER6_PERIOD 0xffc01668 /* Timer 6 Period Register */ +#define TIMER6_WIDTH 0xffc0166c /* Timer 6 Width Register */ +#define TIMER7_CONFIG 0xffc01670 /* Timer 7 Configuration Register */ +#define TIMER7_COUNTER 0xffc01674 /* Timer 7 Counter Register */ +#define TIMER7_PERIOD 0xffc01678 /* Timer 7 Period Register */ +#define TIMER7_WIDTH 0xffc0167c /* Timer 7 Width Register */ + +/* Timer Group of 8 */ + +#define TIMER_ENABLE0 0xffc01680 /* Timer Group of 8 Enable Register */ +#define TIMER_DISABLE0 0xffc01684 /* Timer Group of 8 Disable Register */ +#define TIMER_STATUS0 0xffc01688 /* Timer Group of 8 Status Register */ + +/* DMAC1 Registers */ + +#define DMAC1_TCPER 0xffc01b0c /* DMA Controller 1 Traffic Control Periods Register */ +#define DMAC1_TCCNT 0xffc01b10 /* DMA Controller 1 Current Counts Register */ + +/* DMA Channel 12 Registers */ + +#define DMA12_NEXT_DESC_PTR 0xffc01c00 /* DMA Channel 12 Next Descriptor Pointer Register */ +#define DMA12_START_ADDR 0xffc01c04 /* DMA Channel 12 Start Address Register */ +#define DMA12_CONFIG 0xffc01c08 /* DMA Channel 12 Configuration Register */ +#define DMA12_X_COUNT 0xffc01c10 /* DMA Channel 12 X Count Register */ +#define DMA12_X_MODIFY 0xffc01c14 /* DMA Channel 12 X Modify Register */ +#define DMA12_Y_COUNT 0xffc01c18 /* DMA Channel 12 Y Count Register */ +#define DMA12_Y_MODIFY 0xffc01c1c /* DMA Channel 12 Y Modify Register */ +#define DMA12_CURR_DESC_PTR 0xffc01c20 /* DMA Channel 12 Current Descriptor Pointer Register */ +#define DMA12_CURR_ADDR 0xffc01c24 /* DMA Channel 12 Current Address Register */ +#define DMA12_IRQ_STATUS 0xffc01c28 /* DMA Channel 12 Interrupt/Status Register */ +#define DMA12_PERIPHERAL_MAP 0xffc01c2c /* DMA Channel 12 Peripheral Map Register */ +#define DMA12_CURR_X_COUNT 0xffc01c30 /* DMA Channel 12 Current X Count Register */ +#define DMA12_CURR_Y_COUNT 0xffc01c38 /* DMA Channel 12 Current Y Count Register */ + +/* DMA Channel 13 Registers */ + +#define DMA13_NEXT_DESC_PTR 0xffc01c40 /* DMA Channel 13 Next Descriptor Pointer Register */ +#define DMA13_START_ADDR 0xffc01c44 /* DMA Channel 13 Start Address Register */ +#define DMA13_CONFIG 0xffc01c48 /* DMA Channel 13 Configuration Register */ +#define DMA13_X_COUNT 0xffc01c50 /* DMA Channel 13 X Count Register */ +#define DMA13_X_MODIFY 0xffc01c54 /* DMA Channel 13 X Modify Register */ +#define DMA13_Y_COUNT 0xffc01c58 /* DMA Channel 13 Y Count Register */ +#define DMA13_Y_MODIFY 0xffc01c5c /* DMA Channel 13 Y Modify Register */ +#define DMA13_CURR_DESC_PTR 0xffc01c60 /* DMA Channel 13 Current Descriptor Pointer Register */ +#define DMA13_CURR_ADDR 0xffc01c64 /* DMA Channel 13 Current Address Register */ +#define DMA13_IRQ_STATUS 0xffc01c68 /* DMA Channel 13 Interrupt/Status Register */ +#define DMA13_PERIPHERAL_MAP 0xffc01c6c /* DMA Channel 13 Peripheral Map Register */ +#define DMA13_CURR_X_COUNT 0xffc01c70 /* DMA Channel 13 Current X Count Register */ +#define DMA13_CURR_Y_COUNT 0xffc01c78 /* DMA Channel 13 Current Y Count Register */ + +/* DMA Channel 14 Registers */ + +#define DMA14_NEXT_DESC_PTR 0xffc01c80 /* DMA Channel 14 Next Descriptor Pointer Register */ +#define DMA14_START_ADDR 0xffc01c84 /* DMA Channel 14 Start Address Register */ +#define DMA14_CONFIG 0xffc01c88 /* DMA Channel 14 Configuration Register */ +#define DMA14_X_COUNT 0xffc01c90 /* DMA Channel 14 X Count Register */ +#define DMA14_X_MODIFY 0xffc01c94 /* DMA Channel 14 X Modify Register */ +#define DMA14_Y_COUNT 0xffc01c98 /* DMA Channel 14 Y Count Register */ +#define DMA14_Y_MODIFY 0xffc01c9c /* DMA Channel 14 Y Modify Register */ +#define DMA14_CURR_DESC_PTR 0xffc01ca0 /* DMA Channel 14 Current Descriptor Pointer Register */ +#define DMA14_CURR_ADDR 0xffc01ca4 /* DMA Channel 14 Current Address Register */ +#define DMA14_IRQ_STATUS 0xffc01ca8 /* DMA Channel 14 Interrupt/Status Register */ +#define DMA14_PERIPHERAL_MAP 0xffc01cac /* DMA Channel 14 Peripheral Map Register */ +#define DMA14_CURR_X_COUNT 0xffc01cb0 /* DMA Channel 14 Current X Count Register */ +#define DMA14_CURR_Y_COUNT 0xffc01cb8 /* DMA Channel 14 Current Y Count Register */ + +/* DMA Channel 15 Registers */ + +#define DMA15_NEXT_DESC_PTR 0xffc01cc0 /* DMA Channel 15 Next Descriptor Pointer Register */ +#define DMA15_START_ADDR 0xffc01cc4 /* DMA Channel 15 Start Address Register */ +#define DMA15_CONFIG 0xffc01cc8 /* DMA Channel 15 Configuration Register */ +#define DMA15_X_COUNT 0xffc01cd0 /* DMA Channel 15 X Count Register */ +#define DMA15_X_MODIFY 0xffc01cd4 /* DMA Channel 15 X Modify Register */ +#define DMA15_Y_COUNT 0xffc01cd8 /* DMA Channel 15 Y Count Register */ +#define DMA15_Y_MODIFY 0xffc01cdc /* DMA Channel 15 Y Modify Register */ +#define DMA15_CURR_DESC_PTR 0xffc01ce0 /* DMA Channel 15 Current Descriptor Pointer Register */ +#define DMA15_CURR_ADDR 0xffc01ce4 /* DMA Channel 15 Current Address Register */ +#define DMA15_IRQ_STATUS 0xffc01ce8 /* DMA Channel 15 Interrupt/Status Register */ +#define DMA15_PERIPHERAL_MAP 0xffc01cec /* DMA Channel 15 Peripheral Map Register */ +#define DMA15_CURR_X_COUNT 0xffc01cf0 /* DMA Channel 15 Current X Count Register */ +#define DMA15_CURR_Y_COUNT 0xffc01cf8 /* DMA Channel 15 Current Y Count Register */ + +/* DMA Channel 16 Registers */ + +#define DMA16_NEXT_DESC_PTR 0xffc01d00 /* DMA Channel 16 Next Descriptor Pointer Register */ +#define DMA16_START_ADDR 0xffc01d04 /* DMA Channel 16 Start Address Register */ +#define DMA16_CONFIG 0xffc01d08 /* DMA Channel 16 Configuration Register */ +#define DMA16_X_COUNT 0xffc01d10 /* DMA Channel 16 X Count Register */ +#define DMA16_X_MODIFY 0xffc01d14 /* DMA Channel 16 X Modify Register */ +#define DMA16_Y_COUNT 0xffc01d18 /* DMA Channel 16 Y Count Register */ +#define DMA16_Y_MODIFY 0xffc01d1c /* DMA Channel 16 Y Modify Register */ +#define DMA16_CURR_DESC_PTR 0xffc01d20 /* DMA Channel 16 Current Descriptor Pointer Register */ +#define DMA16_CURR_ADDR 0xffc01d24 /* DMA Channel 16 Current Address Register */ +#define DMA16_IRQ_STATUS 0xffc01d28 /* DMA Channel 16 Interrupt/Status Register */ +#define DMA16_PERIPHERAL_MAP 0xffc01d2c /* DMA Channel 16 Peripheral Map Register */ +#define DMA16_CURR_X_COUNT 0xffc01d30 /* DMA Channel 16 Current X Count Register */ +#define DMA16_CURR_Y_COUNT 0xffc01d38 /* DMA Channel 16 Current Y Count Register */ + +/* DMA Channel 17 Registers */ + +#define DMA17_NEXT_DESC_PTR 0xffc01d40 /* DMA Channel 17 Next Descriptor Pointer Register */ +#define DMA17_START_ADDR 0xffc01d44 /* DMA Channel 17 Start Address Register */ +#define DMA17_CONFIG 0xffc01d48 /* DMA Channel 17 Configuration Register */ +#define DMA17_X_COUNT 0xffc01d50 /* DMA Channel 17 X Count Register */ +#define DMA17_X_MODIFY 0xffc01d54 /* DMA Channel 17 X Modify Register */ +#define DMA17_Y_COUNT 0xffc01d58 /* DMA Channel 17 Y Count Register */ +#define DMA17_Y_MODIFY 0xffc01d5c /* DMA Channel 17 Y Modify Register */ +#define DMA17_CURR_DESC_PTR 0xffc01d60 /* DMA Channel 17 Current Descriptor Pointer Register */ +#define DMA17_CURR_ADDR 0xffc01d64 /* DMA Channel 17 Current Address Register */ +#define DMA17_IRQ_STATUS 0xffc01d68 /* DMA Channel 17 Interrupt/Status Register */ +#define DMA17_PERIPHERAL_MAP 0xffc01d6c /* DMA Channel 17 Peripheral Map Register */ +#define DMA17_CURR_X_COUNT 0xffc01d70 /* DMA Channel 17 Current X Count Register */ +#define DMA17_CURR_Y_COUNT 0xffc01d78 /* DMA Channel 17 Current Y Count Register */ + +/* DMA Channel 18 Registers */ + +#define DMA18_NEXT_DESC_PTR 0xffc01d80 /* DMA Channel 18 Next Descriptor Pointer Register */ +#define DMA18_START_ADDR 0xffc01d84 /* DMA Channel 18 Start Address Register */ +#define DMA18_CONFIG 0xffc01d88 /* DMA Channel 18 Configuration Register */ +#define DMA18_X_COUNT 0xffc01d90 /* DMA Channel 18 X Count Register */ +#define DMA18_X_MODIFY 0xffc01d94 /* DMA Channel 18 X Modify Register */ +#define DMA18_Y_COUNT 0xffc01d98 /* DMA Channel 18 Y Count Register */ +#define DMA18_Y_MODIFY 0xffc01d9c /* DMA Channel 18 Y Modify Register */ +#define DMA18_CURR_DESC_PTR 0xffc01da0 /* DMA Channel 18 Current Descriptor Pointer Register */ +#define DMA18_CURR_ADDR 0xffc01da4 /* DMA Channel 18 Current Address Register */ +#define DMA18_IRQ_STATUS 0xffc01da8 /* DMA Channel 18 Interrupt/Status Register */ +#define DMA18_PERIPHERAL_MAP 0xffc01dac /* DMA Channel 18 Peripheral Map Register */ +#define DMA18_CURR_X_COUNT 0xffc01db0 /* DMA Channel 18 Current X Count Register */ +#define DMA18_CURR_Y_COUNT 0xffc01db8 /* DMA Channel 18 Current Y Count Register */ + +/* DMA Channel 19 Registers */ + +#define DMA19_NEXT_DESC_PTR 0xffc01dc0 /* DMA Channel 19 Next Descriptor Pointer Register */ +#define DMA19_START_ADDR 0xffc01dc4 /* DMA Channel 19 Start Address Register */ +#define DMA19_CONFIG 0xffc01dc8 /* DMA Channel 19 Configuration Register */ +#define DMA19_X_COUNT 0xffc01dd0 /* DMA Channel 19 X Count Register */ +#define DMA19_X_MODIFY 0xffc01dd4 /* DMA Channel 19 X Modify Register */ +#define DMA19_Y_COUNT 0xffc01dd8 /* DMA Channel 19 Y Count Register */ +#define DMA19_Y_MODIFY 0xffc01ddc /* DMA Channel 19 Y Modify Register */ +#define DMA19_CURR_DESC_PTR 0xffc01de0 /* DMA Channel 19 Current Descriptor Pointer Register */ +#define DMA19_CURR_ADDR 0xffc01de4 /* DMA Channel 19 Current Address Register */ +#define DMA19_IRQ_STATUS 0xffc01de8 /* DMA Channel 19 Interrupt/Status Register */ +#define DMA19_PERIPHERAL_MAP 0xffc01dec /* DMA Channel 19 Peripheral Map Register */ +#define DMA19_CURR_X_COUNT 0xffc01df0 /* DMA Channel 19 Current X Count Register */ +#define DMA19_CURR_Y_COUNT 0xffc01df8 /* DMA Channel 19 Current Y Count Register */ + +/* DMA Channel 20 Registers */ + +#define DMA20_NEXT_DESC_PTR 0xffc01e00 /* DMA Channel 20 Next Descriptor Pointer Register */ +#define DMA20_START_ADDR 0xffc01e04 /* DMA Channel 20 Start Address Register */ +#define DMA20_CONFIG 0xffc01e08 /* DMA Channel 20 Configuration Register */ +#define DMA20_X_COUNT 0xffc01e10 /* DMA Channel 20 X Count Register */ +#define DMA20_X_MODIFY 0xffc01e14 /* DMA Channel 20 X Modify Register */ +#define DMA20_Y_COUNT 0xffc01e18 /* DMA Channel 20 Y Count Register */ +#define DMA20_Y_MODIFY 0xffc01e1c /* DMA Channel 20 Y Modify Register */ +#define DMA20_CURR_DESC_PTR 0xffc01e20 /* DMA Channel 20 Current Descriptor Pointer Register */ +#define DMA20_CURR_ADDR 0xffc01e24 /* DMA Channel 20 Current Address Register */ +#define DMA20_IRQ_STATUS 0xffc01e28 /* DMA Channel 20 Interrupt/Status Register */ +#define DMA20_PERIPHERAL_MAP 0xffc01e2c /* DMA Channel 20 Peripheral Map Register */ +#define DMA20_CURR_X_COUNT 0xffc01e30 /* DMA Channel 20 Current X Count Register */ +#define DMA20_CURR_Y_COUNT 0xffc01e38 /* DMA Channel 20 Current Y Count Register */ + +/* DMA Channel 21 Registers */ + +#define DMA21_NEXT_DESC_PTR 0xffc01e40 /* DMA Channel 21 Next Descriptor Pointer Register */ +#define DMA21_START_ADDR 0xffc01e44 /* DMA Channel 21 Start Address Register */ +#define DMA21_CONFIG 0xffc01e48 /* DMA Channel 21 Configuration Register */ +#define DMA21_X_COUNT 0xffc01e50 /* DMA Channel 21 X Count Register */ +#define DMA21_X_MODIFY 0xffc01e54 /* DMA Channel 21 X Modify Register */ +#define DMA21_Y_COUNT 0xffc01e58 /* DMA Channel 21 Y Count Register */ +#define DMA21_Y_MODIFY 0xffc01e5c /* DMA Channel 21 Y Modify Register */ +#define DMA21_CURR_DESC_PTR 0xffc01e60 /* DMA Channel 21 Current Descriptor Pointer Register */ +#define DMA21_CURR_ADDR 0xffc01e64 /* DMA Channel 21 Current Address Register */ +#define DMA21_IRQ_STATUS 0xffc01e68 /* DMA Channel 21 Interrupt/Status Register */ +#define DMA21_PERIPHERAL_MAP 0xffc01e6c /* DMA Channel 21 Peripheral Map Register */ +#define DMA21_CURR_X_COUNT 0xffc01e70 /* DMA Channel 21 Current X Count Register */ +#define DMA21_CURR_Y_COUNT 0xffc01e78 /* DMA Channel 21 Current Y Count Register */ + +/* DMA Channel 22 Registers */ + +#define DMA22_NEXT_DESC_PTR 0xffc01e80 /* DMA Channel 22 Next Descriptor Pointer Register */ +#define DMA22_START_ADDR 0xffc01e84 /* DMA Channel 22 Start Address Register */ +#define DMA22_CONFIG 0xffc01e88 /* DMA Channel 22 Configuration Register */ +#define DMA22_X_COUNT 0xffc01e90 /* DMA Channel 22 X Count Register */ +#define DMA22_X_MODIFY 0xffc01e94 /* DMA Channel 22 X Modify Register */ +#define DMA22_Y_COUNT 0xffc01e98 /* DMA Channel 22 Y Count Register */ +#define DMA22_Y_MODIFY 0xffc01e9c /* DMA Channel 22 Y Modify Register */ +#define DMA22_CURR_DESC_PTR 0xffc01ea0 /* DMA Channel 22 Current Descriptor Pointer Register */ +#define DMA22_CURR_ADDR 0xffc01ea4 /* DMA Channel 22 Current Address Register */ +#define DMA22_IRQ_STATUS 0xffc01ea8 /* DMA Channel 22 Interrupt/Status Register */ +#define DMA22_PERIPHERAL_MAP 0xffc01eac /* DMA Channel 22 Peripheral Map Register */ +#define DMA22_CURR_X_COUNT 0xffc01eb0 /* DMA Channel 22 Current X Count Register */ +#define DMA22_CURR_Y_COUNT 0xffc01eb8 /* DMA Channel 22 Current Y Count Register */ + +/* DMA Channel 23 Registers */ + +#define DMA23_NEXT_DESC_PTR 0xffc01ec0 /* DMA Channel 23 Next Descriptor Pointer Register */ +#define DMA23_START_ADDR 0xffc01ec4 /* DMA Channel 23 Start Address Register */ +#define DMA23_CONFIG 0xffc01ec8 /* DMA Channel 23 Configuration Register */ +#define DMA23_X_COUNT 0xffc01ed0 /* DMA Channel 23 X Count Register */ +#define DMA23_X_MODIFY 0xffc01ed4 /* DMA Channel 23 X Modify Register */ +#define DMA23_Y_COUNT 0xffc01ed8 /* DMA Channel 23 Y Count Register */ +#define DMA23_Y_MODIFY 0xffc01edc /* DMA Channel 23 Y Modify Register */ +#define DMA23_CURR_DESC_PTR 0xffc01ee0 /* DMA Channel 23 Current Descriptor Pointer Register */ +#define DMA23_CURR_ADDR 0xffc01ee4 /* DMA Channel 23 Current Address Register */ +#define DMA23_IRQ_STATUS 0xffc01ee8 /* DMA Channel 23 Interrupt/Status Register */ +#define DMA23_PERIPHERAL_MAP 0xffc01eec /* DMA Channel 23 Peripheral Map Register */ +#define DMA23_CURR_X_COUNT 0xffc01ef0 /* DMA Channel 23 Current X Count Register */ +#define DMA23_CURR_Y_COUNT 0xffc01ef8 /* DMA Channel 23 Current Y Count Register */ + +/* MDMA Stream 2 Registers */ + +#define MDMA_D2_NEXT_DESC_PTR 0xffc01f00 /* Memory DMA Stream 2 Destination Next Descriptor Pointer Register */ +#define MDMA_D2_START_ADDR 0xffc01f04 /* Memory DMA Stream 2 Destination Start Address Register */ +#define MDMA_D2_CONFIG 0xffc01f08 /* Memory DMA Stream 2 Destination Configuration Register */ +#define MDMA_D2_X_COUNT 0xffc01f10 /* Memory DMA Stream 2 Destination X Count Register */ +#define MDMA_D2_X_MODIFY 0xffc01f14 /* Memory DMA Stream 2 Destination X Modify Register */ +#define MDMA_D2_Y_COUNT 0xffc01f18 /* Memory DMA Stream 2 Destination Y Count Register */ +#define MDMA_D2_Y_MODIFY 0xffc01f1c /* Memory DMA Stream 2 Destination Y Modify Register */ +#define MDMA_D2_CURR_DESC_PTR 0xffc01f20 /* Memory DMA Stream 2 Destination Current Descriptor Pointer Register */ +#define MDMA_D2_CURR_ADDR 0xffc01f24 /* Memory DMA Stream 2 Destination Current Address Register */ +#define MDMA_D2_IRQ_STATUS 0xffc01f28 /* Memory DMA Stream 2 Destination Interrupt/Status Register */ +#define MDMA_D2_PERIPHERAL_MAP 0xffc01f2c /* Memory DMA Stream 2 Destination Peripheral Map Register */ +#define MDMA_D2_CURR_X_COUNT 0xffc01f30 /* Memory DMA Stream 2 Destination Current X Count Register */ +#define MDMA_D2_CURR_Y_COUNT 0xffc01f38 /* Memory DMA Stream 2 Destination Current Y Count Register */ +#define MDMA_S2_NEXT_DESC_PTR 0xffc01f40 /* Memory DMA Stream 2 Source Next Descriptor Pointer Register */ +#define MDMA_S2_START_ADDR 0xffc01f44 /* Memory DMA Stream 2 Source Start Address Register */ +#define MDMA_S2_CONFIG 0xffc01f48 /* Memory DMA Stream 2 Source Configuration Register */ +#define MDMA_S2_X_COUNT 0xffc01f50 /* Memory DMA Stream 2 Source X Count Register */ +#define MDMA_S2_X_MODIFY 0xffc01f54 /* Memory DMA Stream 2 Source X Modify Register */ +#define MDMA_S2_Y_COUNT 0xffc01f58 /* Memory DMA Stream 2 Source Y Count Register */ +#define MDMA_S2_Y_MODIFY 0xffc01f5c /* Memory DMA Stream 2 Source Y Modify Register */ +#define MDMA_S2_CURR_DESC_PTR 0xffc01f60 /* Memory DMA Stream 2 Source Current Descriptor Pointer Register */ +#define MDMA_S2_CURR_ADDR 0xffc01f64 /* Memory DMA Stream 2 Source Current Address Register */ +#define MDMA_S2_IRQ_STATUS 0xffc01f68 /* Memory DMA Stream 2 Source Interrupt/Status Register */ +#define MDMA_S2_PERIPHERAL_MAP 0xffc01f6c /* Memory DMA Stream 2 Source Peripheral Map Register */ +#define MDMA_S2_CURR_X_COUNT 0xffc01f70 /* Memory DMA Stream 2 Source Current X Count Register */ +#define MDMA_S2_CURR_Y_COUNT 0xffc01f78 /* Memory DMA Stream 2 Source Current Y Count Register */ + +/* MDMA Stream 3 Registers */ + +#define MDMA_D3_NEXT_DESC_PTR 0xffc01f80 /* Memory DMA Stream 3 Destination Next Descriptor Pointer Register */ +#define MDMA_D3_START_ADDR 0xffc01f84 /* Memory DMA Stream 3 Destination Start Address Register */ +#define MDMA_D3_CONFIG 0xffc01f88 /* Memory DMA Stream 3 Destination Configuration Register */ +#define MDMA_D3_X_COUNT 0xffc01f90 /* Memory DMA Stream 3 Destination X Count Register */ +#define MDMA_D3_X_MODIFY 0xffc01f94 /* Memory DMA Stream 3 Destination X Modify Register */ +#define MDMA_D3_Y_COUNT 0xffc01f98 /* Memory DMA Stream 3 Destination Y Count Register */ +#define MDMA_D3_Y_MODIFY 0xffc01f9c /* Memory DMA Stream 3 Destination Y Modify Register */ +#define MDMA_D3_CURR_DESC_PTR 0xffc01fa0 /* Memory DMA Stream 3 Destination Current Descriptor Pointer Register */ +#define MDMA_D3_CURR_ADDR 0xffc01fa4 /* Memory DMA Stream 3 Destination Current Address Register */ +#define MDMA_D3_IRQ_STATUS 0xffc01fa8 /* Memory DMA Stream 3 Destination Interrupt/Status Register */ +#define MDMA_D3_PERIPHERAL_MAP 0xffc01fac /* Memory DMA Stream 3 Destination Peripheral Map Register */ +#define MDMA_D3_CURR_X_COUNT 0xffc01fb0 /* Memory DMA Stream 3 Destination Current X Count Register */ +#define MDMA_D3_CURR_Y_COUNT 0xffc01fb8 /* Memory DMA Stream 3 Destination Current Y Count Register */ +#define MDMA_S3_NEXT_DESC_PTR 0xffc01fc0 /* Memory DMA Stream 3 Source Next Descriptor Pointer Register */ +#define MDMA_S3_START_ADDR 0xffc01fc4 /* Memory DMA Stream 3 Source Start Address Register */ +#define MDMA_S3_CONFIG 0xffc01fc8 /* Memory DMA Stream 3 Source Configuration Register */ +#define MDMA_S3_X_COUNT 0xffc01fd0 /* Memory DMA Stream 3 Source X Count Register */ +#define MDMA_S3_X_MODIFY 0xffc01fd4 /* Memory DMA Stream 3 Source X Modify Register */ +#define MDMA_S3_Y_COUNT 0xffc01fd8 /* Memory DMA Stream 3 Source Y Count Register */ +#define MDMA_S3_Y_MODIFY 0xffc01fdc /* Memory DMA Stream 3 Source Y Modify Register */ +#define MDMA_S3_CURR_DESC_PTR 0xffc01fe0 /* Memory DMA Stream 3 Source Current Descriptor Pointer Register */ +#define MDMA_S3_CURR_ADDR 0xffc01fe4 /* Memory DMA Stream 3 Source Current Address Register */ +#define MDMA_S3_IRQ_STATUS 0xffc01fe8 /* Memory DMA Stream 3 Source Interrupt/Status Register */ +#define MDMA_S3_PERIPHERAL_MAP 0xffc01fec /* Memory DMA Stream 3 Source Peripheral Map Register */ +#define MDMA_S3_CURR_X_COUNT 0xffc01ff0 /* Memory DMA Stream 3 Source Current X Count Register */ +#define MDMA_S3_CURR_Y_COUNT 0xffc01ff8 /* Memory DMA Stream 3 Source Current Y Count Register */ + +/* UART1 Registers */ + +#define UART1_DLL 0xffc02000 /* Divisor Latch Low Byte */ +#define UART1_DLH 0xffc02004 /* Divisor Latch High Byte */ +#define UART1_GCTL 0xffc02008 /* Global Control Register */ +#define UART1_LCR 0xffc0200c /* Line Control Register */ +#define UART1_MCR 0xffc02010 /* Modem Control Register */ +#define UART1_LSR 0xffc02014 /* Line Status Register */ +#define UART1_MSR 0xffc02018 /* Modem Status Register */ +#define UART1_SCR 0xffc0201c /* Scratch Register */ +#define UART1_IER_SET 0xffc02020 /* Interrupt Enable Register Set */ +#define UART1_IER_CLEAR 0xffc02024 /* Interrupt Enable Register Clear */ +#define UART1_THR 0xffc02028 /* Transmit Hold Register */ +#define UART1_RBR 0xffc0202c /* Receive Buffer Register */ + +/* UART2 is not defined in the shared file because it is not available on the ADSP-BF542 and ADSP-BF544 processors */ + +/* SPI1 Registers */ + +#define SPI1_CTL 0xffc02300 /* SPI1 Control Register */ +#define SPI1_FLG 0xffc02304 /* SPI1 Flag Register */ +#define SPI1_STAT 0xffc02308 /* SPI1 Status Register */ +#define SPI1_TDBR 0xffc0230c /* SPI1 Transmit Data Buffer Register */ +#define SPI1_RDBR 0xffc02310 /* SPI1 Receive Data Buffer Register */ +#define SPI1_BAUD 0xffc02314 /* SPI1 Baud Rate Register */ +#define SPI1_SHADOW 0xffc02318 /* SPI1 Receive Data Buffer Shadow Register */ + +/* SPORT2 Registers */ + +#define SPORT2_TCR1 0xffc02500 /* SPORT2 Transmit Configuration 1 Register */ +#define SPORT2_TCR2 0xffc02504 /* SPORT2 Transmit Configuration 2 Register */ +#define SPORT2_TCLKDIV 0xffc02508 /* SPORT2 Transmit Serial Clock Divider Register */ +#define SPORT2_TFSDIV 0xffc0250c /* SPORT2 Transmit Frame Sync Divider Register */ +#define SPORT2_TX 0xffc02510 /* SPORT2 Transmit Data Register */ +#define SPORT2_RX 0xffc02518 /* SPORT2 Receive Data Register */ +#define SPORT2_RCR1 0xffc02520 /* SPORT2 Receive Configuration 1 Register */ +#define SPORT2_RCR2 0xffc02524 /* SPORT2 Receive Configuration 2 Register */ +#define SPORT2_RCLKDIV 0xffc02528 /* SPORT2 Receive Serial Clock Divider Register */ +#define SPORT2_RFSDIV 0xffc0252c /* SPORT2 Receive Frame Sync Divider Register */ +#define SPORT2_STAT 0xffc02530 /* SPORT2 Status Register */ +#define SPORT2_CHNL 0xffc02534 /* SPORT2 Current Channel Register */ +#define SPORT2_MCMC1 0xffc02538 /* SPORT2 Multi channel Configuration Register 1 */ +#define SPORT2_MCMC2 0xffc0253c /* SPORT2 Multi channel Configuration Register 2 */ +#define SPORT2_MTCS0 0xffc02540 /* SPORT2 Multi channel Transmit Select Register 0 */ +#define SPORT2_MTCS1 0xffc02544 /* SPORT2 Multi channel Transmit Select Register 1 */ +#define SPORT2_MTCS2 0xffc02548 /* SPORT2 Multi channel Transmit Select Register 2 */ +#define SPORT2_MTCS3 0xffc0254c /* SPORT2 Multi channel Transmit Select Register 3 */ +#define SPORT2_MRCS0 0xffc02550 /* SPORT2 Multi channel Receive Select Register 0 */ +#define SPORT2_MRCS1 0xffc02554 /* SPORT2 Multi channel Receive Select Register 1 */ +#define SPORT2_MRCS2 0xffc02558 /* SPORT2 Multi channel Receive Select Register 2 */ +#define SPORT2_MRCS3 0xffc0255c /* SPORT2 Multi channel Receive Select Register 3 */ + +/* SPORT3 Registers */ + +#define SPORT3_TCR1 0xffc02600 /* SPORT3 Transmit Configuration 1 Register */ +#define SPORT3_TCR2 0xffc02604 /* SPORT3 Transmit Configuration 2 Register */ +#define SPORT3_TCLKDIV 0xffc02608 /* SPORT3 Transmit Serial Clock Divider Register */ +#define SPORT3_TFSDIV 0xffc0260c /* SPORT3 Transmit Frame Sync Divider Register */ +#define SPORT3_TX 0xffc02610 /* SPORT3 Transmit Data Register */ +#define SPORT3_RX 0xffc02618 /* SPORT3 Receive Data Register */ +#define SPORT3_RCR1 0xffc02620 /* SPORT3 Receive Configuration 1 Register */ +#define SPORT3_RCR2 0xffc02624 /* SPORT3 Receive Configuration 2 Register */ +#define SPORT3_RCLKDIV 0xffc02628 /* SPORT3 Receive Serial Clock Divider Register */ +#define SPORT3_RFSDIV 0xffc0262c /* SPORT3 Receive Frame Sync Divider Register */ +#define SPORT3_STAT 0xffc02630 /* SPORT3 Status Register */ +#define SPORT3_CHNL 0xffc02634 /* SPORT3 Current Channel Register */ +#define SPORT3_MCMC1 0xffc02638 /* SPORT3 Multi channel Configuration Register 1 */ +#define SPORT3_MCMC2 0xffc0263c /* SPORT3 Multi channel Configuration Register 2 */ +#define SPORT3_MTCS0 0xffc02640 /* SPORT3 Multi channel Transmit Select Register 0 */ +#define SPORT3_MTCS1 0xffc02644 /* SPORT3 Multi channel Transmit Select Register 1 */ +#define SPORT3_MTCS2 0xffc02648 /* SPORT3 Multi channel Transmit Select Register 2 */ +#define SPORT3_MTCS3 0xffc0264c /* SPORT3 Multi channel Transmit Select Register 3 */ +#define SPORT3_MRCS0 0xffc02650 /* SPORT3 Multi channel Receive Select Register 0 */ +#define SPORT3_MRCS1 0xffc02654 /* SPORT3 Multi channel Receive Select Register 1 */ +#define SPORT3_MRCS2 0xffc02658 /* SPORT3 Multi channel Receive Select Register 2 */ +#define SPORT3_MRCS3 0xffc0265c /* SPORT3 Multi channel Receive Select Register 3 */ + +/* EPPI2 Registers */ + +#define EPPI2_STATUS 0xffc02900 /* EPPI2 Status Register */ +#define EPPI2_HCOUNT 0xffc02904 /* EPPI2 Horizontal Transfer Count Register */ +#define EPPI2_HDELAY 0xffc02908 /* EPPI2 Horizontal Delay Count Register */ +#define EPPI2_VCOUNT 0xffc0290c /* EPPI2 Vertical Transfer Count Register */ +#define EPPI2_VDELAY 0xffc02910 /* EPPI2 Vertical Delay Count Register */ +#define EPPI2_FRAME 0xffc02914 /* EPPI2 Lines per Frame Register */ +#define EPPI2_LINE 0xffc02918 /* EPPI2 Samples per Line Register */ +#define EPPI2_CLKDIV 0xffc0291c /* EPPI2 Clock Divide Register */ +#define EPPI2_CONTROL 0xffc02920 /* EPPI2 Control Register */ +#define EPPI2_FS1W_HBL 0xffc02924 /* EPPI2 FS1 Width Register / EPPI2 Horizontal Blanking Samples Per Line Register */ +#define EPPI2_FS1P_AVPL 0xffc02928 /* EPPI2 FS1 Period Register / EPPI2 Active Video Samples Per Line Register */ +#define EPPI2_FS2W_LVB 0xffc0292c /* EPPI2 FS2 Width Register / EPPI2 Lines of Vertical Blanking Register */ +#define EPPI2_FS2P_LAVF 0xffc02930 /* EPPI2 FS2 Period Register/ EPPI2 Lines of Active Video Per Field Register */ +#define EPPI2_CLIP 0xffc02934 /* EPPI2 Clipping Register */ + +/* CAN Controller 0 Config 1 Registers */ + +#define CAN0_MC1 0xffc02a00 /* CAN Controller 0 Mailbox Configuration Register 1 */ +#define CAN0_MD1 0xffc02a04 /* CAN Controller 0 Mailbox Direction Register 1 */ +#define CAN0_TRS1 0xffc02a08 /* CAN Controller 0 Transmit Request Set Register 1 */ +#define CAN0_TRR1 0xffc02a0c /* CAN Controller 0 Transmit Request Reset Register 1 */ +#define CAN0_TA1 0xffc02a10 /* CAN Controller 0 Transmit Acknowledge Register 1 */ +#define CAN0_AA1 0xffc02a14 /* CAN Controller 0 Abort Acknowledge Register 1 */ +#define CAN0_RMP1 0xffc02a18 /* CAN Controller 0 Receive Message Pending Register 1 */ +#define CAN0_RML1 0xffc02a1c /* CAN Controller 0 Receive Message Lost Register 1 */ +#define CAN0_MBTIF1 0xffc02a20 /* CAN Controller 0 Mailbox Transmit Interrupt Flag Register 1 */ +#define CAN0_MBRIF1 0xffc02a24 /* CAN Controller 0 Mailbox Receive Interrupt Flag Register 1 */ +#define CAN0_MBIM1 0xffc02a28 /* CAN Controller 0 Mailbox Interrupt Mask Register 1 */ +#define CAN0_RFH1 0xffc02a2c /* CAN Controller 0 Remote Frame Handling Enable Register 1 */ +#define CAN0_OPSS1 0xffc02a30 /* CAN Controller 0 Overwrite Protection Single Shot Transmit Register 1 */ + +/* CAN Controller 0 Config 2 Registers */ + +#define CAN0_MC2 0xffc02a40 /* CAN Controller 0 Mailbox Configuration Register 2 */ +#define CAN0_MD2 0xffc02a44 /* CAN Controller 0 Mailbox Direction Register 2 */ +#define CAN0_TRS2 0xffc02a48 /* CAN Controller 0 Transmit Request Set Register 2 */ +#define CAN0_TRR2 0xffc02a4c /* CAN Controller 0 Transmit Request Reset Register 2 */ +#define CAN0_TA2 0xffc02a50 /* CAN Controller 0 Transmit Acknowledge Register 2 */ +#define CAN0_AA2 0xffc02a54 /* CAN Controller 0 Abort Acknowledge Register 2 */ +#define CAN0_RMP2 0xffc02a58 /* CAN Controller 0 Receive Message Pending Register 2 */ +#define CAN0_RML2 0xffc02a5c /* CAN Controller 0 Receive Message Lost Register 2 */ +#define CAN0_MBTIF2 0xffc02a60 /* CAN Controller 0 Mailbox Transmit Interrupt Flag Register 2 */ +#define CAN0_MBRIF2 0xffc02a64 /* CAN Controller 0 Mailbox Receive Interrupt Flag Register 2 */ +#define CAN0_MBIM2 0xffc02a68 /* CAN Controller 0 Mailbox Interrupt Mask Register 2 */ +#define CAN0_RFH2 0xffc02a6c /* CAN Controller 0 Remote Frame Handling Enable Register 2 */ +#define CAN0_OPSS2 0xffc02a70 /* CAN Controller 0 Overwrite Protection Single Shot Transmit Register 2 */ + +/* CAN Controller 0 Clock/Interrupt/Counter Registers */ + +#define CAN0_CLOCK 0xffc02a80 /* CAN Controller 0 Clock Register */ +#define CAN0_TIMING 0xffc02a84 /* CAN Controller 0 Timing Register */ +#define CAN0_DEBUG 0xffc02a88 /* CAN Controller 0 Debug Register */ +#define CAN0_STATUS 0xffc02a8c /* CAN Controller 0 Global Status Register */ +#define CAN0_CEC 0xffc02a90 /* CAN Controller 0 Error Counter Register */ +#define CAN0_GIS 0xffc02a94 /* CAN Controller 0 Global Interrupt Status Register */ +#define CAN0_GIM 0xffc02a98 /* CAN Controller 0 Global Interrupt Mask Register */ +#define CAN0_GIF 0xffc02a9c /* CAN Controller 0 Global Interrupt Flag Register */ +#define CAN0_CONTROL 0xffc02aa0 /* CAN Controller 0 Master Control Register */ +#define CAN0_INTR 0xffc02aa4 /* CAN Controller 0 Interrupt Pending Register */ +#define CAN0_MBTD 0xffc02aac /* CAN Controller 0 Mailbox Temporary Disable Register */ +#define CAN0_EWR 0xffc02ab0 /* CAN Controller 0 Programmable Warning Level Register */ +#define CAN0_ESR 0xffc02ab4 /* CAN Controller 0 Error Status Register */ +#define CAN0_UCCNT 0xffc02ac4 /* CAN Controller 0 Universal Counter Register */ +#define CAN0_UCRC 0xffc02ac8 /* CAN Controller 0 Universal Counter Force Reload Register */ +#define CAN0_UCCNF 0xffc02acc /* CAN Controller 0 Universal Counter Configuration Register */ + +/* CAN Controller 0 Acceptance Registers */ + +#define CAN0_AM00L 0xffc02b00 /* CAN Controller 0 Mailbox 0 Acceptance Mask High Register */ +#define CAN0_AM00H 0xffc02b04 /* CAN Controller 0 Mailbox 0 Acceptance Mask Low Register */ +#define CAN0_AM01L 0xffc02b08 /* CAN Controller 0 Mailbox 1 Acceptance Mask High Register */ +#define CAN0_AM01H 0xffc02b0c /* CAN Controller 0 Mailbox 1 Acceptance Mask Low Register */ +#define CAN0_AM02L 0xffc02b10 /* CAN Controller 0 Mailbox 2 Acceptance Mask High Register */ +#define CAN0_AM02H 0xffc02b14 /* CAN Controller 0 Mailbox 2 Acceptance Mask Low Register */ +#define CAN0_AM03L 0xffc02b18 /* CAN Controller 0 Mailbox 3 Acceptance Mask High Register */ +#define CAN0_AM03H 0xffc02b1c /* CAN Controller 0 Mailbox 3 Acceptance Mask Low Register */ +#define CAN0_AM04L 0xffc02b20 /* CAN Controller 0 Mailbox 4 Acceptance Mask High Register */ +#define CAN0_AM04H 0xffc02b24 /* CAN Controller 0 Mailbox 4 Acceptance Mask Low Register */ +#define CAN0_AM05L 0xffc02b28 /* CAN Controller 0 Mailbox 5 Acceptance Mask High Register */ +#define CAN0_AM05H 0xffc02b2c /* CAN Controller 0 Mailbox 5 Acceptance Mask Low Register */ +#define CAN0_AM06L 0xffc02b30 /* CAN Controller 0 Mailbox 6 Acceptance Mask High Register */ +#define CAN0_AM06H 0xffc02b34 /* CAN Controller 0 Mailbox 6 Acceptance Mask Low Register */ +#define CAN0_AM07L 0xffc02b38 /* CAN Controller 0 Mailbox 7 Acceptance Mask High Register */ +#define CAN0_AM07H 0xffc02b3c /* CAN Controller 0 Mailbox 7 Acceptance Mask Low Register */ +#define CAN0_AM08L 0xffc02b40 /* CAN Controller 0 Mailbox 8 Acceptance Mask High Register */ +#define CAN0_AM08H 0xffc02b44 /* CAN Controller 0 Mailbox 8 Acceptance Mask Low Register */ +#define CAN0_AM09L 0xffc02b48 /* CAN Controller 0 Mailbox 9 Acceptance Mask High Register */ +#define CAN0_AM09H 0xffc02b4c /* CAN Controller 0 Mailbox 9 Acceptance Mask Low Register */ +#define CAN0_AM10L 0xffc02b50 /* CAN Controller 0 Mailbox 10 Acceptance Mask High Register */ +#define CAN0_AM10H 0xffc02b54 /* CAN Controller 0 Mailbox 10 Acceptance Mask Low Register */ +#define CAN0_AM11L 0xffc02b58 /* CAN Controller 0 Mailbox 11 Acceptance Mask High Register */ +#define CAN0_AM11H 0xffc02b5c /* CAN Controller 0 Mailbox 11 Acceptance Mask Low Register */ +#define CAN0_AM12L 0xffc02b60 /* CAN Controller 0 Mailbox 12 Acceptance Mask High Register */ +#define CAN0_AM12H 0xffc02b64 /* CAN Controller 0 Mailbox 12 Acceptance Mask Low Register */ +#define CAN0_AM13L 0xffc02b68 /* CAN Controller 0 Mailbox 13 Acceptance Mask High Register */ +#define CAN0_AM13H 0xffc02b6c /* CAN Controller 0 Mailbox 13 Acceptance Mask Low Register */ +#define CAN0_AM14L 0xffc02b70 /* CAN Controller 0 Mailbox 14 Acceptance Mask High Register */ +#define CAN0_AM14H 0xffc02b74 /* CAN Controller 0 Mailbox 14 Acceptance Mask Low Register */ +#define CAN0_AM15L 0xffc02b78 /* CAN Controller 0 Mailbox 15 Acceptance Mask High Register */ +#define CAN0_AM15H 0xffc02b7c /* CAN Controller 0 Mailbox 15 Acceptance Mask Low Register */ + +/* CAN Controller 0 Acceptance Registers */ + +#define CAN0_AM16L 0xffc02b80 /* CAN Controller 0 Mailbox 16 Acceptance Mask High Register */ +#define CAN0_AM16H 0xffc02b84 /* CAN Controller 0 Mailbox 16 Acceptance Mask Low Register */ +#define CAN0_AM17L 0xffc02b88 /* CAN Controller 0 Mailbox 17 Acceptance Mask High Register */ +#define CAN0_AM17H 0xffc02b8c /* CAN Controller 0 Mailbox 17 Acceptance Mask Low Register */ +#define CAN0_AM18L 0xffc02b90 /* CAN Controller 0 Mailbox 18 Acceptance Mask High Register */ +#define CAN0_AM18H 0xffc02b94 /* CAN Controller 0 Mailbox 18 Acceptance Mask Low Register */ +#define CAN0_AM19L 0xffc02b98 /* CAN Controller 0 Mailbox 19 Acceptance Mask High Register */ +#define CAN0_AM19H 0xffc02b9c /* CAN Controller 0 Mailbox 19 Acceptance Mask Low Register */ +#define CAN0_AM20L 0xffc02ba0 /* CAN Controller 0 Mailbox 20 Acceptance Mask High Register */ +#define CAN0_AM20H 0xffc02ba4 /* CAN Controller 0 Mailbox 20 Acceptance Mask Low Register */ +#define CAN0_AM21L 0xffc02ba8 /* CAN Controller 0 Mailbox 21 Acceptance Mask High Register */ +#define CAN0_AM21H 0xffc02bac /* CAN Controller 0 Mailbox 21 Acceptance Mask Low Register */ +#define CAN0_AM22L 0xffc02bb0 /* CAN Controller 0 Mailbox 22 Acceptance Mask High Register */ +#define CAN0_AM22H 0xffc02bb4 /* CAN Controller 0 Mailbox 22 Acceptance Mask Low Register */ +#define CAN0_AM23L 0xffc02bb8 /* CAN Controller 0 Mailbox 23 Acceptance Mask High Register */ +#define CAN0_AM23H 0xffc02bbc /* CAN Controller 0 Mailbox 23 Acceptance Mask Low Register */ +#define CAN0_AM24L 0xffc02bc0 /* CAN Controller 0 Mailbox 24 Acceptance Mask High Register */ +#define CAN0_AM24H 0xffc02bc4 /* CAN Controller 0 Mailbox 24 Acceptance Mask Low Register */ +#define CAN0_AM25L 0xffc02bc8 /* CAN Controller 0 Mailbox 25 Acceptance Mask High Register */ +#define CAN0_AM25H 0xffc02bcc /* CAN Controller 0 Mailbox 25 Acceptance Mask Low Register */ +#define CAN0_AM26L 0xffc02bd0 /* CAN Controller 0 Mailbox 26 Acceptance Mask High Register */ +#define CAN0_AM26H 0xffc02bd4 /* CAN Controller 0 Mailbox 26 Acceptance Mask Low Register */ +#define CAN0_AM27L 0xffc02bd8 /* CAN Controller 0 Mailbox 27 Acceptance Mask High Register */ +#define CAN0_AM27H 0xffc02bdc /* CAN Controller 0 Mailbox 27 Acceptance Mask Low Register */ +#define CAN0_AM28L 0xffc02be0 /* CAN Controller 0 Mailbox 28 Acceptance Mask High Register */ +#define CAN0_AM28H 0xffc02be4 /* CAN Controller 0 Mailbox 28 Acceptance Mask Low Register */ +#define CAN0_AM29L 0xffc02be8 /* CAN Controller 0 Mailbox 29 Acceptance Mask High Register */ +#define CAN0_AM29H 0xffc02bec /* CAN Controller 0 Mailbox 29 Acceptance Mask Low Register */ +#define CAN0_AM30L 0xffc02bf0 /* CAN Controller 0 Mailbox 30 Acceptance Mask High Register */ +#define CAN0_AM30H 0xffc02bf4 /* CAN Controller 0 Mailbox 30 Acceptance Mask Low Register */ +#define CAN0_AM31L 0xffc02bf8 /* CAN Controller 0 Mailbox 31 Acceptance Mask High Register */ +#define CAN0_AM31H 0xffc02bfc /* CAN Controller 0 Mailbox 31 Acceptance Mask Low Register */ + +/* CAN Controller 0 Mailbox Data Registers */ + +#define CAN0_MB00_DATA0 0xffc02c00 /* CAN Controller 0 Mailbox 0 Data 0 Register */ +#define CAN0_MB00_DATA1 0xffc02c04 /* CAN Controller 0 Mailbox 0 Data 1 Register */ +#define CAN0_MB00_DATA2 0xffc02c08 /* CAN Controller 0 Mailbox 0 Data 2 Register */ +#define CAN0_MB00_DATA3 0xffc02c0c /* CAN Controller 0 Mailbox 0 Data 3 Register */ +#define CAN0_MB00_LENGTH 0xffc02c10 /* CAN Controller 0 Mailbox 0 Length Register */ +#define CAN0_MB00_TIMESTAMP 0xffc02c14 /* CAN Controller 0 Mailbox 0 Timestamp Register */ +#define CAN0_MB00_ID0 0xffc02c18 /* CAN Controller 0 Mailbox 0 ID0 Register */ +#define CAN0_MB00_ID1 0xffc02c1c /* CAN Controller 0 Mailbox 0 ID1 Register */ +#define CAN0_MB01_DATA0 0xffc02c20 /* CAN Controller 0 Mailbox 1 Data 0 Register */ +#define CAN0_MB01_DATA1 0xffc02c24 /* CAN Controller 0 Mailbox 1 Data 1 Register */ +#define CAN0_MB01_DATA2 0xffc02c28 /* CAN Controller 0 Mailbox 1 Data 2 Register */ +#define CAN0_MB01_DATA3 0xffc02c2c /* CAN Controller 0 Mailbox 1 Data 3 Register */ +#define CAN0_MB01_LENGTH 0xffc02c30 /* CAN Controller 0 Mailbox 1 Length Register */ +#define CAN0_MB01_TIMESTAMP 0xffc02c34 /* CAN Controller 0 Mailbox 1 Timestamp Register */ +#define CAN0_MB01_ID0 0xffc02c38 /* CAN Controller 0 Mailbox 1 ID0 Register */ +#define CAN0_MB01_ID1 0xffc02c3c /* CAN Controller 0 Mailbox 1 ID1 Register */ +#define CAN0_MB02_DATA0 0xffc02c40 /* CAN Controller 0 Mailbox 2 Data 0 Register */ +#define CAN0_MB02_DATA1 0xffc02c44 /* CAN Controller 0 Mailbox 2 Data 1 Register */ +#define CAN0_MB02_DATA2 0xffc02c48 /* CAN Controller 0 Mailbox 2 Data 2 Register */ +#define CAN0_MB02_DATA3 0xffc02c4c /* CAN Controller 0 Mailbox 2 Data 3 Register */ +#define CAN0_MB02_LENGTH 0xffc02c50 /* CAN Controller 0 Mailbox 2 Length Register */ +#define CAN0_MB02_TIMESTAMP 0xffc02c54 /* CAN Controller 0 Mailbox 2 Timestamp Register */ +#define CAN0_MB02_ID0 0xffc02c58 /* CAN Controller 0 Mailbox 2 ID0 Register */ +#define CAN0_MB02_ID1 0xffc02c5c /* CAN Controller 0 Mailbox 2 ID1 Register */ +#define CAN0_MB03_DATA0 0xffc02c60 /* CAN Controller 0 Mailbox 3 Data 0 Register */ +#define CAN0_MB03_DATA1 0xffc02c64 /* CAN Controller 0 Mailbox 3 Data 1 Register */ +#define CAN0_MB03_DATA2 0xffc02c68 /* CAN Controller 0 Mailbox 3 Data 2 Register */ +#define CAN0_MB03_DATA3 0xffc02c6c /* CAN Controller 0 Mailbox 3 Data 3 Register */ +#define CAN0_MB03_LENGTH 0xffc02c70 /* CAN Controller 0 Mailbox 3 Length Register */ +#define CAN0_MB03_TIMESTAMP 0xffc02c74 /* CAN Controller 0 Mailbox 3 Timestamp Register */ +#define CAN0_MB03_ID0 0xffc02c78 /* CAN Controller 0 Mailbox 3 ID0 Register */ +#define CAN0_MB03_ID1 0xffc02c7c /* CAN Controller 0 Mailbox 3 ID1 Register */ +#define CAN0_MB04_DATA0 0xffc02c80 /* CAN Controller 0 Mailbox 4 Data 0 Register */ +#define CAN0_MB04_DATA1 0xffc02c84 /* CAN Controller 0 Mailbox 4 Data 1 Register */ +#define CAN0_MB04_DATA2 0xffc02c88 /* CAN Controller 0 Mailbox 4 Data 2 Register */ +#define CAN0_MB04_DATA3 0xffc02c8c /* CAN Controller 0 Mailbox 4 Data 3 Register */ +#define CAN0_MB04_LENGTH 0xffc02c90 /* CAN Controller 0 Mailbox 4 Length Register */ +#define CAN0_MB04_TIMESTAMP 0xffc02c94 /* CAN Controller 0 Mailbox 4 Timestamp Register */ +#define CAN0_MB04_ID0 0xffc02c98 /* CAN Controller 0 Mailbox 4 ID0 Register */ +#define CAN0_MB04_ID1 0xffc02c9c /* CAN Controller 0 Mailbox 4 ID1 Register */ +#define CAN0_MB05_DATA0 0xffc02ca0 /* CAN Controller 0 Mailbox 5 Data 0 Register */ +#define CAN0_MB05_DATA1 0xffc02ca4 /* CAN Controller 0 Mailbox 5 Data 1 Register */ +#define CAN0_MB05_DATA2 0xffc02ca8 /* CAN Controller 0 Mailbox 5 Data 2 Register */ +#define CAN0_MB05_DATA3 0xffc02cac /* CAN Controller 0 Mailbox 5 Data 3 Register */ +#define CAN0_MB05_LENGTH 0xffc02cb0 /* CAN Controller 0 Mailbox 5 Length Register */ +#define CAN0_MB05_TIMESTAMP 0xffc02cb4 /* CAN Controller 0 Mailbox 5 Timestamp Register */ +#define CAN0_MB05_ID0 0xffc02cb8 /* CAN Controller 0 Mailbox 5 ID0 Register */ +#define CAN0_MB05_ID1 0xffc02cbc /* CAN Controller 0 Mailbox 5 ID1 Register */ +#define CAN0_MB06_DATA0 0xffc02cc0 /* CAN Controller 0 Mailbox 6 Data 0 Register */ +#define CAN0_MB06_DATA1 0xffc02cc4 /* CAN Controller 0 Mailbox 6 Data 1 Register */ +#define CAN0_MB06_DATA2 0xffc02cc8 /* CAN Controller 0 Mailbox 6 Data 2 Register */ +#define CAN0_MB06_DATA3 0xffc02ccc /* CAN Controller 0 Mailbox 6 Data 3 Register */ +#define CAN0_MB06_LENGTH 0xffc02cd0 /* CAN Controller 0 Mailbox 6 Length Register */ +#define CAN0_MB06_TIMESTAMP 0xffc02cd4 /* CAN Controller 0 Mailbox 6 Timestamp Register */ +#define CAN0_MB06_ID0 0xffc02cd8 /* CAN Controller 0 Mailbox 6 ID0 Register */ +#define CAN0_MB06_ID1 0xffc02cdc /* CAN Controller 0 Mailbox 6 ID1 Register */ +#define CAN0_MB07_DATA0 0xffc02ce0 /* CAN Controller 0 Mailbox 7 Data 0 Register */ +#define CAN0_MB07_DATA1 0xffc02ce4 /* CAN Controller 0 Mailbox 7 Data 1 Register */ +#define CAN0_MB07_DATA2 0xffc02ce8 /* CAN Controller 0 Mailbox 7 Data 2 Register */ +#define CAN0_MB07_DATA3 0xffc02cec /* CAN Controller 0 Mailbox 7 Data 3 Register */ +#define CAN0_MB07_LENGTH 0xffc02cf0 /* CAN Controller 0 Mailbox 7 Length Register */ +#define CAN0_MB07_TIMESTAMP 0xffc02cf4 /* CAN Controller 0 Mailbox 7 Timestamp Register */ +#define CAN0_MB07_ID0 0xffc02cf8 /* CAN Controller 0 Mailbox 7 ID0 Register */ +#define CAN0_MB07_ID1 0xffc02cfc /* CAN Controller 0 Mailbox 7 ID1 Register */ +#define CAN0_MB08_DATA0 0xffc02d00 /* CAN Controller 0 Mailbox 8 Data 0 Register */ +#define CAN0_MB08_DATA1 0xffc02d04 /* CAN Controller 0 Mailbox 8 Data 1 Register */ +#define CAN0_MB08_DATA2 0xffc02d08 /* CAN Controller 0 Mailbox 8 Data 2 Register */ +#define CAN0_MB08_DATA3 0xffc02d0c /* CAN Controller 0 Mailbox 8 Data 3 Register */ +#define CAN0_MB08_LENGTH 0xffc02d10 /* CAN Controller 0 Mailbox 8 Length Register */ +#define CAN0_MB08_TIMESTAMP 0xffc02d14 /* CAN Controller 0 Mailbox 8 Timestamp Register */ +#define CAN0_MB08_ID0 0xffc02d18 /* CAN Controller 0 Mailbox 8 ID0 Register */ +#define CAN0_MB08_ID1 0xffc02d1c /* CAN Controller 0 Mailbox 8 ID1 Register */ +#define CAN0_MB09_DATA0 0xffc02d20 /* CAN Controller 0 Mailbox 9 Data 0 Register */ +#define CAN0_MB09_DATA1 0xffc02d24 /* CAN Controller 0 Mailbox 9 Data 1 Register */ +#define CAN0_MB09_DATA2 0xffc02d28 /* CAN Controller 0 Mailbox 9 Data 2 Register */ +#define CAN0_MB09_DATA3 0xffc02d2c /* CAN Controller 0 Mailbox 9 Data 3 Register */ +#define CAN0_MB09_LENGTH 0xffc02d30 /* CAN Controller 0 Mailbox 9 Length Register */ +#define CAN0_MB09_TIMESTAMP 0xffc02d34 /* CAN Controller 0 Mailbox 9 Timestamp Register */ +#define CAN0_MB09_ID0 0xffc02d38 /* CAN Controller 0 Mailbox 9 ID0 Register */ +#define CAN0_MB09_ID1 0xffc02d3c /* CAN Controller 0 Mailbox 9 ID1 Register */ +#define CAN0_MB10_DATA0 0xffc02d40 /* CAN Controller 0 Mailbox 10 Data 0 Register */ +#define CAN0_MB10_DATA1 0xffc02d44 /* CAN Controller 0 Mailbox 10 Data 1 Register */ +#define CAN0_MB10_DATA2 0xffc02d48 /* CAN Controller 0 Mailbox 10 Data 2 Register */ +#define CAN0_MB10_DATA3 0xffc02d4c /* CAN Controller 0 Mailbox 10 Data 3 Register */ +#define CAN0_MB10_LENGTH 0xffc02d50 /* CAN Controller 0 Mailbox 10 Length Register */ +#define CAN0_MB10_TIMESTAMP 0xffc02d54 /* CAN Controller 0 Mailbox 10 Timestamp Register */ +#define CAN0_MB10_ID0 0xffc02d58 /* CAN Controller 0 Mailbox 10 ID0 Register */ +#define CAN0_MB10_ID1 0xffc02d5c /* CAN Controller 0 Mailbox 10 ID1 Register */ +#define CAN0_MB11_DATA0 0xffc02d60 /* CAN Controller 0 Mailbox 11 Data 0 Register */ +#define CAN0_MB11_DATA1 0xffc02d64 /* CAN Controller 0 Mailbox 11 Data 1 Register */ +#define CAN0_MB11_DATA2 0xffc02d68 /* CAN Controller 0 Mailbox 11 Data 2 Register */ +#define CAN0_MB11_DATA3 0xffc02d6c /* CAN Controller 0 Mailbox 11 Data 3 Register */ +#define CAN0_MB11_LENGTH 0xffc02d70 /* CAN Controller 0 Mailbox 11 Length Register */ +#define CAN0_MB11_TIMESTAMP 0xffc02d74 /* CAN Controller 0 Mailbox 11 Timestamp Register */ +#define CAN0_MB11_ID0 0xffc02d78 /* CAN Controller 0 Mailbox 11 ID0 Register */ +#define CAN0_MB11_ID1 0xffc02d7c /* CAN Controller 0 Mailbox 11 ID1 Register */ +#define CAN0_MB12_DATA0 0xffc02d80 /* CAN Controller 0 Mailbox 12 Data 0 Register */ +#define CAN0_MB12_DATA1 0xffc02d84 /* CAN Controller 0 Mailbox 12 Data 1 Register */ +#define CAN0_MB12_DATA2 0xffc02d88 /* CAN Controller 0 Mailbox 12 Data 2 Register */ +#define CAN0_MB12_DATA3 0xffc02d8c /* CAN Controller 0 Mailbox 12 Data 3 Register */ +#define CAN0_MB12_LENGTH 0xffc02d90 /* CAN Controller 0 Mailbox 12 Length Register */ +#define CAN0_MB12_TIMESTAMP 0xffc02d94 /* CAN Controller 0 Mailbox 12 Timestamp Register */ +#define CAN0_MB12_ID0 0xffc02d98 /* CAN Controller 0 Mailbox 12 ID0 Register */ +#define CAN0_MB12_ID1 0xffc02d9c /* CAN Controller 0 Mailbox 12 ID1 Register */ +#define CAN0_MB13_DATA0 0xffc02da0 /* CAN Controller 0 Mailbox 13 Data 0 Register */ +#define CAN0_MB13_DATA1 0xffc02da4 /* CAN Controller 0 Mailbox 13 Data 1 Register */ +#define CAN0_MB13_DATA2 0xffc02da8 /* CAN Controller 0 Mailbox 13 Data 2 Register */ +#define CAN0_MB13_DATA3 0xffc02dac /* CAN Controller 0 Mailbox 13 Data 3 Register */ +#define CAN0_MB13_LENGTH 0xffc02db0 /* CAN Controller 0 Mailbox 13 Length Register */ +#define CAN0_MB13_TIMESTAMP 0xffc02db4 /* CAN Controller 0 Mailbox 13 Timestamp Register */ +#define CAN0_MB13_ID0 0xffc02db8 /* CAN Controller 0 Mailbox 13 ID0 Register */ +#define CAN0_MB13_ID1 0xffc02dbc /* CAN Controller 0 Mailbox 13 ID1 Register */ +#define CAN0_MB14_DATA0 0xffc02dc0 /* CAN Controller 0 Mailbox 14 Data 0 Register */ +#define CAN0_MB14_DATA1 0xffc02dc4 /* CAN Controller 0 Mailbox 14 Data 1 Register */ +#define CAN0_MB14_DATA2 0xffc02dc8 /* CAN Controller 0 Mailbox 14 Data 2 Register */ +#define CAN0_MB14_DATA3 0xffc02dcc /* CAN Controller 0 Mailbox 14 Data 3 Register */ +#define CAN0_MB14_LENGTH 0xffc02dd0 /* CAN Controller 0 Mailbox 14 Length Register */ +#define CAN0_MB14_TIMESTAMP 0xffc02dd4 /* CAN Controller 0 Mailbox 14 Timestamp Register */ +#define CAN0_MB14_ID0 0xffc02dd8 /* CAN Controller 0 Mailbox 14 ID0 Register */ +#define CAN0_MB14_ID1 0xffc02ddc /* CAN Controller 0 Mailbox 14 ID1 Register */ +#define CAN0_MB15_DATA0 0xffc02de0 /* CAN Controller 0 Mailbox 15 Data 0 Register */ +#define CAN0_MB15_DATA1 0xffc02de4 /* CAN Controller 0 Mailbox 15 Data 1 Register */ +#define CAN0_MB15_DATA2 0xffc02de8 /* CAN Controller 0 Mailbox 15 Data 2 Register */ +#define CAN0_MB15_DATA3 0xffc02dec /* CAN Controller 0 Mailbox 15 Data 3 Register */ +#define CAN0_MB15_LENGTH 0xffc02df0 /* CAN Controller 0 Mailbox 15 Length Register */ +#define CAN0_MB15_TIMESTAMP 0xffc02df4 /* CAN Controller 0 Mailbox 15 Timestamp Register */ +#define CAN0_MB15_ID0 0xffc02df8 /* CAN Controller 0 Mailbox 15 ID0 Register */ +#define CAN0_MB15_ID1 0xffc02dfc /* CAN Controller 0 Mailbox 15 ID1 Register */ + +/* CAN Controller 0 Mailbox Data Registers */ + +#define CAN0_MB16_DATA0 0xffc02e00 /* CAN Controller 0 Mailbox 16 Data 0 Register */ +#define CAN0_MB16_DATA1 0xffc02e04 /* CAN Controller 0 Mailbox 16 Data 1 Register */ +#define CAN0_MB16_DATA2 0xffc02e08 /* CAN Controller 0 Mailbox 16 Data 2 Register */ +#define CAN0_MB16_DATA3 0xffc02e0c /* CAN Controller 0 Mailbox 16 Data 3 Register */ +#define CAN0_MB16_LENGTH 0xffc02e10 /* CAN Controller 0 Mailbox 16 Length Register */ +#define CAN0_MB16_TIMESTAMP 0xffc02e14 /* CAN Controller 0 Mailbox 16 Timestamp Register */ +#define CAN0_MB16_ID0 0xffc02e18 /* CAN Controller 0 Mailbox 16 ID0 Register */ +#define CAN0_MB16_ID1 0xffc02e1c /* CAN Controller 0 Mailbox 16 ID1 Register */ +#define CAN0_MB17_DATA0 0xffc02e20 /* CAN Controller 0 Mailbox 17 Data 0 Register */ +#define CAN0_MB17_DATA1 0xffc02e24 /* CAN Controller 0 Mailbox 17 Data 1 Register */ +#define CAN0_MB17_DATA2 0xffc02e28 /* CAN Controller 0 Mailbox 17 Data 2 Register */ +#define CAN0_MB17_DATA3 0xffc02e2c /* CAN Controller 0 Mailbox 17 Data 3 Register */ +#define CAN0_MB17_LENGTH 0xffc02e30 /* CAN Controller 0 Mailbox 17 Length Register */ +#define CAN0_MB17_TIMESTAMP 0xffc02e34 /* CAN Controller 0 Mailbox 17 Timestamp Register */ +#define CAN0_MB17_ID0 0xffc02e38 /* CAN Controller 0 Mailbox 17 ID0 Register */ +#define CAN0_MB17_ID1 0xffc02e3c /* CAN Controller 0 Mailbox 17 ID1 Register */ +#define CAN0_MB18_DATA0 0xffc02e40 /* CAN Controller 0 Mailbox 18 Data 0 Register */ +#define CAN0_MB18_DATA1 0xffc02e44 /* CAN Controller 0 Mailbox 18 Data 1 Register */ +#define CAN0_MB18_DATA2 0xffc02e48 /* CAN Controller 0 Mailbox 18 Data 2 Register */ +#define CAN0_MB18_DATA3 0xffc02e4c /* CAN Controller 0 Mailbox 18 Data 3 Register */ +#define CAN0_MB18_LENGTH 0xffc02e50 /* CAN Controller 0 Mailbox 18 Length Register */ +#define CAN0_MB18_TIMESTAMP 0xffc02e54 /* CAN Controller 0 Mailbox 18 Timestamp Register */ +#define CAN0_MB18_ID0 0xffc02e58 /* CAN Controller 0 Mailbox 18 ID0 Register */ +#define CAN0_MB18_ID1 0xffc02e5c /* CAN Controller 0 Mailbox 18 ID1 Register */ +#define CAN0_MB19_DATA0 0xffc02e60 /* CAN Controller 0 Mailbox 19 Data 0 Register */ +#define CAN0_MB19_DATA1 0xffc02e64 /* CAN Controller 0 Mailbox 19 Data 1 Register */ +#define CAN0_MB19_DATA2 0xffc02e68 /* CAN Controller 0 Mailbox 19 Data 2 Register */ +#define CAN0_MB19_DATA3 0xffc02e6c /* CAN Controller 0 Mailbox 19 Data 3 Register */ +#define CAN0_MB19_LENGTH 0xffc02e70 /* CAN Controller 0 Mailbox 19 Length Register */ +#define CAN0_MB19_TIMESTAMP 0xffc02e74 /* CAN Controller 0 Mailbox 19 Timestamp Register */ +#define CAN0_MB19_ID0 0xffc02e78 /* CAN Controller 0 Mailbox 19 ID0 Register */ +#define CAN0_MB19_ID1 0xffc02e7c /* CAN Controller 0 Mailbox 19 ID1 Register */ +#define CAN0_MB20_DATA0 0xffc02e80 /* CAN Controller 0 Mailbox 20 Data 0 Register */ +#define CAN0_MB20_DATA1 0xffc02e84 /* CAN Controller 0 Mailbox 20 Data 1 Register */ +#define CAN0_MB20_DATA2 0xffc02e88 /* CAN Controller 0 Mailbox 20 Data 2 Register */ +#define CAN0_MB20_DATA3 0xffc02e8c /* CAN Controller 0 Mailbox 20 Data 3 Register */ +#define CAN0_MB20_LENGTH 0xffc02e90 /* CAN Controller 0 Mailbox 20 Length Register */ +#define CAN0_MB20_TIMESTAMP 0xffc02e94 /* CAN Controller 0 Mailbox 20 Timestamp Register */ +#define CAN0_MB20_ID0 0xffc02e98 /* CAN Controller 0 Mailbox 20 ID0 Register */ +#define CAN0_MB20_ID1 0xffc02e9c /* CAN Controller 0 Mailbox 20 ID1 Register */ +#define CAN0_MB21_DATA0 0xffc02ea0 /* CAN Controller 0 Mailbox 21 Data 0 Register */ +#define CAN0_MB21_DATA1 0xffc02ea4 /* CAN Controller 0 Mailbox 21 Data 1 Register */ +#define CAN0_MB21_DATA2 0xffc02ea8 /* CAN Controller 0 Mailbox 21 Data 2 Register */ +#define CAN0_MB21_DATA3 0xffc02eac /* CAN Controller 0 Mailbox 21 Data 3 Register */ +#define CAN0_MB21_LENGTH 0xffc02eb0 /* CAN Controller 0 Mailbox 21 Length Register */ +#define CAN0_MB21_TIMESTAMP 0xffc02eb4 /* CAN Controller 0 Mailbox 21 Timestamp Register */ +#define CAN0_MB21_ID0 0xffc02eb8 /* CAN Controller 0 Mailbox 21 ID0 Register */ +#define CAN0_MB21_ID1 0xffc02ebc /* CAN Controller 0 Mailbox 21 ID1 Register */ +#define CAN0_MB22_DATA0 0xffc02ec0 /* CAN Controller 0 Mailbox 22 Data 0 Register */ +#define CAN0_MB22_DATA1 0xffc02ec4 /* CAN Controller 0 Mailbox 22 Data 1 Register */ +#define CAN0_MB22_DATA2 0xffc02ec8 /* CAN Controller 0 Mailbox 22 Data 2 Register */ +#define CAN0_MB22_DATA3 0xffc02ecc /* CAN Controller 0 Mailbox 22 Data 3 Register */ +#define CAN0_MB22_LENGTH 0xffc02ed0 /* CAN Controller 0 Mailbox 22 Length Register */ +#define CAN0_MB22_TIMESTAMP 0xffc02ed4 /* CAN Controller 0 Mailbox 22 Timestamp Register */ +#define CAN0_MB22_ID0 0xffc02ed8 /* CAN Controller 0 Mailbox 22 ID0 Register */ +#define CAN0_MB22_ID1 0xffc02edc /* CAN Controller 0 Mailbox 22 ID1 Register */ +#define CAN0_MB23_DATA0 0xffc02ee0 /* CAN Controller 0 Mailbox 23 Data 0 Register */ +#define CAN0_MB23_DATA1 0xffc02ee4 /* CAN Controller 0 Mailbox 23 Data 1 Register */ +#define CAN0_MB23_DATA2 0xffc02ee8 /* CAN Controller 0 Mailbox 23 Data 2 Register */ +#define CAN0_MB23_DATA3 0xffc02eec /* CAN Controller 0 Mailbox 23 Data 3 Register */ +#define CAN0_MB23_LENGTH 0xffc02ef0 /* CAN Controller 0 Mailbox 23 Length Register */ +#define CAN0_MB23_TIMESTAMP 0xffc02ef4 /* CAN Controller 0 Mailbox 23 Timestamp Register */ +#define CAN0_MB23_ID0 0xffc02ef8 /* CAN Controller 0 Mailbox 23 ID0 Register */ +#define CAN0_MB23_ID1 0xffc02efc /* CAN Controller 0 Mailbox 23 ID1 Register */ +#define CAN0_MB24_DATA0 0xffc02f00 /* CAN Controller 0 Mailbox 24 Data 0 Register */ +#define CAN0_MB24_DATA1 0xffc02f04 /* CAN Controller 0 Mailbox 24 Data 1 Register */ +#define CAN0_MB24_DATA2 0xffc02f08 /* CAN Controller 0 Mailbox 24 Data 2 Register */ +#define CAN0_MB24_DATA3 0xffc02f0c /* CAN Controller 0 Mailbox 24 Data 3 Register */ +#define CAN0_MB24_LENGTH 0xffc02f10 /* CAN Controller 0 Mailbox 24 Length Register */ +#define CAN0_MB24_TIMESTAMP 0xffc02f14 /* CAN Controller 0 Mailbox 24 Timestamp Register */ +#define CAN0_MB24_ID0 0xffc02f18 /* CAN Controller 0 Mailbox 24 ID0 Register */ +#define CAN0_MB24_ID1 0xffc02f1c /* CAN Controller 0 Mailbox 24 ID1 Register */ +#define CAN0_MB25_DATA0 0xffc02f20 /* CAN Controller 0 Mailbox 25 Data 0 Register */ +#define CAN0_MB25_DATA1 0xffc02f24 /* CAN Controller 0 Mailbox 25 Data 1 Register */ +#define CAN0_MB25_DATA2 0xffc02f28 /* CAN Controller 0 Mailbox 25 Data 2 Register */ +#define CAN0_MB25_DATA3 0xffc02f2c /* CAN Controller 0 Mailbox 25 Data 3 Register */ +#define CAN0_MB25_LENGTH 0xffc02f30 /* CAN Controller 0 Mailbox 25 Length Register */ +#define CAN0_MB25_TIMESTAMP 0xffc02f34 /* CAN Controller 0 Mailbox 25 Timestamp Register */ +#define CAN0_MB25_ID0 0xffc02f38 /* CAN Controller 0 Mailbox 25 ID0 Register */ +#define CAN0_MB25_ID1 0xffc02f3c /* CAN Controller 0 Mailbox 25 ID1 Register */ +#define CAN0_MB26_DATA0 0xffc02f40 /* CAN Controller 0 Mailbox 26 Data 0 Register */ +#define CAN0_MB26_DATA1 0xffc02f44 /* CAN Controller 0 Mailbox 26 Data 1 Register */ +#define CAN0_MB26_DATA2 0xffc02f48 /* CAN Controller 0 Mailbox 26 Data 2 Register */ +#define CAN0_MB26_DATA3 0xffc02f4c /* CAN Controller 0 Mailbox 26 Data 3 Register */ +#define CAN0_MB26_LENGTH 0xffc02f50 /* CAN Controller 0 Mailbox 26 Length Register */ +#define CAN0_MB26_TIMESTAMP 0xffc02f54 /* CAN Controller 0 Mailbox 26 Timestamp Register */ +#define CAN0_MB26_ID0 0xffc02f58 /* CAN Controller 0 Mailbox 26 ID0 Register */ +#define CAN0_MB26_ID1 0xffc02f5c /* CAN Controller 0 Mailbox 26 ID1 Register */ +#define CAN0_MB27_DATA0 0xffc02f60 /* CAN Controller 0 Mailbox 27 Data 0 Register */ +#define CAN0_MB27_DATA1 0xffc02f64 /* CAN Controller 0 Mailbox 27 Data 1 Register */ +#define CAN0_MB27_DATA2 0xffc02f68 /* CAN Controller 0 Mailbox 27 Data 2 Register */ +#define CAN0_MB27_DATA3 0xffc02f6c /* CAN Controller 0 Mailbox 27 Data 3 Register */ +#define CAN0_MB27_LENGTH 0xffc02f70 /* CAN Controller 0 Mailbox 27 Length Register */ +#define CAN0_MB27_TIMESTAMP 0xffc02f74 /* CAN Controller 0 Mailbox 27 Timestamp Register */ +#define CAN0_MB27_ID0 0xffc02f78 /* CAN Controller 0 Mailbox 27 ID0 Register */ +#define CAN0_MB27_ID1 0xffc02f7c /* CAN Controller 0 Mailbox 27 ID1 Register */ +#define CAN0_MB28_DATA0 0xffc02f80 /* CAN Controller 0 Mailbox 28 Data 0 Register */ +#define CAN0_MB28_DATA1 0xffc02f84 /* CAN Controller 0 Mailbox 28 Data 1 Register */ +#define CAN0_MB28_DATA2 0xffc02f88 /* CAN Controller 0 Mailbox 28 Data 2 Register */ +#define CAN0_MB28_DATA3 0xffc02f8c /* CAN Controller 0 Mailbox 28 Data 3 Register */ +#define CAN0_MB28_LENGTH 0xffc02f90 /* CAN Controller 0 Mailbox 28 Length Register */ +#define CAN0_MB28_TIMESTAMP 0xffc02f94 /* CAN Controller 0 Mailbox 28 Timestamp Register */ +#define CAN0_MB28_ID0 0xffc02f98 /* CAN Controller 0 Mailbox 28 ID0 Register */ +#define CAN0_MB28_ID1 0xffc02f9c /* CAN Controller 0 Mailbox 28 ID1 Register */ +#define CAN0_MB29_DATA0 0xffc02fa0 /* CAN Controller 0 Mailbox 29 Data 0 Register */ +#define CAN0_MB29_DATA1 0xffc02fa4 /* CAN Controller 0 Mailbox 29 Data 1 Register */ +#define CAN0_MB29_DATA2 0xffc02fa8 /* CAN Controller 0 Mailbox 29 Data 2 Register */ +#define CAN0_MB29_DATA3 0xffc02fac /* CAN Controller 0 Mailbox 29 Data 3 Register */ +#define CAN0_MB29_LENGTH 0xffc02fb0 /* CAN Controller 0 Mailbox 29 Length Register */ +#define CAN0_MB29_TIMESTAMP 0xffc02fb4 /* CAN Controller 0 Mailbox 29 Timestamp Register */ +#define CAN0_MB29_ID0 0xffc02fb8 /* CAN Controller 0 Mailbox 29 ID0 Register */ +#define CAN0_MB29_ID1 0xffc02fbc /* CAN Controller 0 Mailbox 29 ID1 Register */ +#define CAN0_MB30_DATA0 0xffc02fc0 /* CAN Controller 0 Mailbox 30 Data 0 Register */ +#define CAN0_MB30_DATA1 0xffc02fc4 /* CAN Controller 0 Mailbox 30 Data 1 Register */ +#define CAN0_MB30_DATA2 0xffc02fc8 /* CAN Controller 0 Mailbox 30 Data 2 Register */ +#define CAN0_MB30_DATA3 0xffc02fcc /* CAN Controller 0 Mailbox 30 Data 3 Register */ +#define CAN0_MB30_LENGTH 0xffc02fd0 /* CAN Controller 0 Mailbox 30 Length Register */ +#define CAN0_MB30_TIMESTAMP 0xffc02fd4 /* CAN Controller 0 Mailbox 30 Timestamp Register */ +#define CAN0_MB30_ID0 0xffc02fd8 /* CAN Controller 0 Mailbox 30 ID0 Register */ +#define CAN0_MB30_ID1 0xffc02fdc /* CAN Controller 0 Mailbox 30 ID1 Register */ +#define CAN0_MB31_DATA0 0xffc02fe0 /* CAN Controller 0 Mailbox 31 Data 0 Register */ +#define CAN0_MB31_DATA1 0xffc02fe4 /* CAN Controller 0 Mailbox 31 Data 1 Register */ +#define CAN0_MB31_DATA2 0xffc02fe8 /* CAN Controller 0 Mailbox 31 Data 2 Register */ +#define CAN0_MB31_DATA3 0xffc02fec /* CAN Controller 0 Mailbox 31 Data 3 Register */ +#define CAN0_MB31_LENGTH 0xffc02ff0 /* CAN Controller 0 Mailbox 31 Length Register */ +#define CAN0_MB31_TIMESTAMP 0xffc02ff4 /* CAN Controller 0 Mailbox 31 Timestamp Register */ +#define CAN0_MB31_ID0 0xffc02ff8 /* CAN Controller 0 Mailbox 31 ID0 Register */ +#define CAN0_MB31_ID1 0xffc02ffc /* CAN Controller 0 Mailbox 31 ID1 Register */ + +/* UART3 Registers */ + +#define UART3_DLL 0xffc03100 /* Divisor Latch Low Byte */ +#define UART3_DLH 0xffc03104 /* Divisor Latch High Byte */ +#define UART3_GCTL 0xffc03108 /* Global Control Register */ +#define UART3_LCR 0xffc0310c /* Line Control Register */ +#define UART3_MCR 0xffc03110 /* Modem Control Register */ +#define UART3_LSR 0xffc03114 /* Line Status Register */ +#define UART3_MSR 0xffc03118 /* Modem Status Register */ +#define UART3_SCR 0xffc0311c /* Scratch Register */ +#define UART3_IER_SET 0xffc03120 /* Interrupt Enable Register Set */ +#define UART3_IER_CLEAR 0xffc03124 /* Interrupt Enable Register Clear */ +#define UART3_THR 0xffc03128 /* Transmit Hold Register */ +#define UART3_RBR 0xffc0312c /* Receive Buffer Register */ + +/* NFC Registers */ + +#define NFC_CTL 0xffc03b00 /* NAND Control Register */ +#define NFC_STAT 0xffc03b04 /* NAND Status Register */ +#define NFC_IRQSTAT 0xffc03b08 /* NAND Interrupt Status Register */ +#define NFC_IRQMASK 0xffc03b0c /* NAND Interrupt Mask Register */ +#define NFC_ECC0 0xffc03b10 /* NAND ECC Register 0 */ +#define NFC_ECC1 0xffc03b14 /* NAND ECC Register 1 */ +#define NFC_ECC2 0xffc03b18 /* NAND ECC Register 2 */ +#define NFC_ECC3 0xffc03b1c /* NAND ECC Register 3 */ +#define NFC_COUNT 0xffc03b20 /* NAND ECC Count Register */ +#define NFC_RST 0xffc03b24 /* NAND ECC Reset Register */ +#define NFC_PGCTL 0xffc03b28 /* NAND Page Control Register */ +#define NFC_READ 0xffc03b2c /* NAND Read Data Register */ +#define NFC_ADDR 0xffc03b40 /* NAND Address Register */ +#define NFC_CMD 0xffc03b44 /* NAND Command Register */ +#define NFC_DATA_WR 0xffc03b48 /* NAND Data Write Register */ +#define NFC_DATA_RD 0xffc03b4c /* NAND Data Read Register */ + +/* Counter Registers */ + +#define CNT_CONFIG 0xffc04200 /* Configuration Register */ +#define CNT_IMASK 0xffc04204 /* Interrupt Mask Register */ +#define CNT_STATUS 0xffc04208 /* Status Register */ +#define CNT_COMMAND 0xffc0420c /* Command Register */ +#define CNT_DEBOUNCE 0xffc04210 /* Debounce Register */ +#define CNT_COUNTER 0xffc04214 /* Counter Register */ +#define CNT_MAX 0xffc04218 /* Maximal Count Register */ +#define CNT_MIN 0xffc0421c /* Minimal Count Register */ + +/* OTP/FUSE Registers */ + +#define OTP_CONTROL 0xffc04300 /* OTP/Fuse Control Register */ +#define OTP_BEN 0xffc04304 /* OTP/Fuse Byte Enable */ +#define OTP_STATUS 0xffc04308 /* OTP/Fuse Status */ +#define OTP_TIMING 0xffc0430c /* OTP/Fuse Access Timing */ + +/* Security Registers */ + +#define SECURE_SYSSWT 0xffc04320 /* Secure System Switches */ +#define SECURE_CONTROL 0xffc04324 /* Secure Control */ +#define SECURE_STATUS 0xffc04328 /* Secure Status */ + +/* DMA Peripheral Mux Register */ + +#define DMAC1_PERIMUX 0xffc04340 /* DMA Controller 1 Peripheral Multiplexer Register */ + +/* OTP Read/Write Data Buffer Registers */ + +#define OTP_DATA0 0xffc04380 /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */ +#define OTP_DATA1 0xffc04384 /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */ +#define OTP_DATA2 0xffc04388 /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */ +#define OTP_DATA3 0xffc0438c /* OTP/Fuse Data (OTP_DATA0-3) accesses the fuse read write buffer */ + +/* Handshake MDMA is not defined in the shared file because it is not available on the ADSP-BF542 processor */ + +/* ********************************************************** */ +/* SINGLE BIT MACRO PAIRS (bit mask and negated one) */ +/* and MULTI BIT READ MACROS */ +/* ********************************************************** */ + +/* Bit masks for SIC_IAR0 */ + +#define IRQ_PLL_WAKEUP 0x1 /* PLL Wakeup */ +#define nIRQ_PLL_WAKEUP 0x0 + +/* Bit masks for SIC_IWR0, SIC_IMASK0, SIC_ISR0 */ + +#define IRQ_DMA0_ERR 0x2 /* DMA Controller 0 Error */ +#define nIRQ_DMA0_ERR 0x0 +#define IRQ_EPPI0_ERR 0x4 /* EPPI0 Error */ +#define nIRQ_EPPI0_ERR 0x0 +#define IRQ_SPORT0_ERR 0x8 /* SPORT0 Error */ +#define nIRQ_SPORT0_ERR 0x0 +#define IRQ_SPORT1_ERR 0x10 /* SPORT1 Error */ +#define nIRQ_SPORT1_ERR 0x0 +#define IRQ_SPI0_ERR 0x20 /* SPI0 Error */ +#define nIRQ_SPI0_ERR 0x0 +#define IRQ_UART0_ERR 0x40 /* UART0 Error */ +#define nIRQ_UART0_ERR 0x0 +#define IRQ_RTC 0x80 /* Real-Time Clock */ +#define nIRQ_RTC 0x0 +#define IRQ_DMA12 0x100 /* DMA Channel 12 */ +#define nIRQ_DMA12 0x0 +#define IRQ_DMA0 0x200 /* DMA Channel 0 */ +#define nIRQ_DMA0 0x0 +#define IRQ_DMA1 0x400 /* DMA Channel 1 */ +#define nIRQ_DMA1 0x0 +#define IRQ_DMA2 0x800 /* DMA Channel 2 */ +#define nIRQ_DMA2 0x0 +#define IRQ_DMA3 0x1000 /* DMA Channel 3 */ +#define nIRQ_DMA3 0x0 +#define IRQ_DMA4 0x2000 /* DMA Channel 4 */ +#define nIRQ_DMA4 0x0 +#define IRQ_DMA6 0x4000 /* DMA Channel 6 */ +#define nIRQ_DMA6 0x0 +#define IRQ_DMA7 0x8000 /* DMA Channel 7 */ +#define nIRQ_DMA7 0x0 +#define IRQ_PINT0 0x80000 /* Pin Interrupt 0 */ +#define nIRQ_PINT0 0x0 +#define IRQ_PINT1 0x100000 /* Pin Interrupt 1 */ +#define nIRQ_PINT1 0x0 +#define IRQ_MDMA0 0x200000 /* Memory DMA Stream 0 */ +#define nIRQ_MDMA0 0x0 +#define IRQ_MDMA1 0x400000 /* Memory DMA Stream 1 */ +#define nIRQ_MDMA1 0x0 +#define IRQ_WDOG 0x800000 /* Watchdog Timer */ +#define nIRQ_WDOG 0x0 +#define IRQ_DMA1_ERR 0x1000000 /* DMA Controller 1 Error */ +#define nIRQ_DMA1_ERR 0x0 +#define IRQ_SPORT2_ERR 0x2000000 /* SPORT2 Error */ +#define nIRQ_SPORT2_ERR 0x0 +#define IRQ_SPORT3_ERR 0x4000000 /* SPORT3 Error */ +#define nIRQ_SPORT3_ERR 0x0 +#define IRQ_MXVR_SD 0x8000000 /* MXVR Synchronous Data */ +#define nIRQ_MXVR_SD 0x0 +#define IRQ_SPI1_ERR 0x10000000 /* SPI1 Error */ +#define nIRQ_SPI1_ERR 0x0 +#define IRQ_SPI2_ERR 0x20000000 /* SPI2 Error */ +#define nIRQ_SPI2_ERR 0x0 +#define IRQ_UART1_ERR 0x40000000 /* UART1 Error */ +#define nIRQ_UART1_ERR 0x0 +#define IRQ_UART2_ERR 0x80000000 /* UART2 Error */ +#define nIRQ_UART2_ERR 0x0 + +/* Bit masks for SIC_IWR1, SIC_IMASK1, SIC_ISR1 */ + +#define IRQ_CAN0_ERR 0x1 /* CAN0 Error */ +#define nIRQ_CAN0_ERR 0x0 +#define IRQ_DMA18 0x2 /* DMA Channel 18 */ +#define nIRQ_DMA18 0x0 +#define IRQ_DMA19 0x4 /* DMA Channel 19 */ +#define nIRQ_DMA19 0x0 +#define IRQ_DMA20 0x8 /* DMA Channel 20 */ +#define nIRQ_DMA20 0x0 +#define IRQ_DMA21 0x10 /* DMA Channel 21 */ +#define nIRQ_DMA21 0x0 +#define IRQ_DMA13 0x20 /* DMA Channel 13 */ +#define nIRQ_DMA13 0x0 +#define IRQ_DMA14 0x40 /* DMA Channel 14 */ +#define nIRQ_DMA14 0x0 +#define IRQ_DMA5 0x80 /* DMA Channel 5 */ +#define nIRQ_DMA5 0x0 +#define IRQ_DMA23 0x100 /* DMA Channel 23 */ +#define nIRQ_DMA23 0x0 +#define IRQ_DMA8 0x200 /* DMA Channel 8 */ +#define nIRQ_DMA8 0x0 +#define IRQ_DMA9 0x400 /* DMA Channel 9 */ +#define nIRQ_DMA9 0x0 +#define IRQ_DMA10 0x800 /* DMA Channel 10 */ +#define nIRQ_DMA10 0x0 +#define IRQ_DMA11 0x1000 /* DMA Channel 11 */ +#define nIRQ_DMA11 0x0 +#define IRQ_TWI0 0x2000 /* TWI0 */ +#define nIRQ_TWI0 0x0 +#define IRQ_TWI1 0x4000 /* TWI1 */ +#define nIRQ_TWI1 0x0 +#define IRQ_CAN0_RX 0x8000 /* CAN0 Receive */ +#define nIRQ_CAN0_RX 0x0 +#define IRQ_CAN0_TX 0x10000 /* CAN0 Transmit */ +#define nIRQ_CAN0_TX 0x0 +#define IRQ_MDMA2 0x20000 /* Memory DMA Stream 0 */ +#define nIRQ_MDMA2 0x0 +#define IRQ_MDMA3 0x40000 /* Memory DMA Stream 1 */ +#define nIRQ_MDMA3 0x0 +#define IRQ_MXVR_STAT 0x80000 /* MXVR Status */ +#define nIRQ_MXVR_STAT 0x0 +#define IRQ_MXVR_CM 0x100000 /* MXVR Control Message */ +#define nIRQ_MXVR_CM 0x0 +#define IRQ_MXVR_AP 0x200000 /* MXVR Asynchronous Packet */ +#define nIRQ_MXVR_AP 0x0 +#define IRQ_EPPI1_ERR 0x400000 /* EPPI1 Error */ +#define nIRQ_EPPI1_ERR 0x0 +#define IRQ_EPPI2_ERR 0x800000 /* EPPI2 Error */ +#define nIRQ_EPPI2_ERR 0x0 +#define IRQ_UART3_ERR 0x1000000 /* UART3 Error */ +#define nIRQ_UART3_ERR 0x0 +#define IRQ_HOST_ERR 0x2000000 /* Host DMA Port Error */ +#define nIRQ_HOST_ERR 0x0 +#define IRQ_USB_ERR 0x4000000 /* USB Error */ +#define nIRQ_USB_ERR 0x0 +#define IRQ_PIXC_ERR 0x8000000 /* Pixel Compositor Error */ +#define nIRQ_PIXC_ERR 0x0 +#define IRQ_NFC_ERR 0x10000000 /* Nand Flash Controller Error */ +#define nIRQ_NFC_ERR 0x0 +#define IRQ_ATAPI_ERR 0x20000000 /* ATAPI Error */ +#define nIRQ_ATAPI_ERR 0x0 +#define IRQ_CAN1_ERR 0x40000000 /* CAN1 Error */ +#define nIRQ_CAN1_ERR 0x0 +#define IRQ_DMAR0_ERR 0x80000000 /* DMAR0 Overflow Error */ +#define nIRQ_DMAR0_ERR 0x0 +#define IRQ_DMAR1_ERR 0x80000000 /* DMAR1 Overflow Error */ +#define nIRQ_DMAR1_ERR 0x0 +#define IRQ_DMAR0 0x80000000 /* DMAR0 Block */ +#define nIRQ_DMAR0 0x0 +#define IRQ_DMAR1 0x80000000 /* DMAR1 Block */ +#define nIRQ_DMAR1 0x0 + +/* Bit masks for SIC_IWR2, SIC_IMASK2, SIC_ISR2 */ + +#define IRQ_DMA15 0x1 /* DMA Channel 15 */ +#define nIRQ_DMA15 0x0 +#define IRQ_DMA16 0x2 /* DMA Channel 16 */ +#define nIRQ_DMA16 0x0 +#define IRQ_DMA17 0x4 /* DMA Channel 17 */ +#define nIRQ_DMA17 0x0 +#define IRQ_DMA22 0x8 /* DMA Channel 22 */ +#define nIRQ_DMA22 0x0 +#define IRQ_CNT 0x10 /* Counter */ +#define nIRQ_CNT 0x0 +#define IRQ_KEY 0x20 /* Keypad */ +#define nIRQ_KEY 0x0 +#define IRQ_CAN1_RX 0x40 /* CAN1 Receive */ +#define nIRQ_CAN1_RX 0x0 +#define IRQ_CAN1_TX 0x80 /* CAN1 Transmit */ +#define nIRQ_CAN1_TX 0x0 +#define IRQ_SDH_MASK0 0x100 /* SDH Mask 0 */ +#define nIRQ_SDH_MASK0 0x0 +#define IRQ_SDH_MASK1 0x200 /* SDH Mask 1 */ +#define nIRQ_SDH_MASK1 0x0 +#define IRQ_USB_EINT 0x400 /* USB Exception */ +#define nIRQ_USB_EINT 0x0 +#define IRQ_USB_INT0 0x800 /* USB Interrupt 0 */ +#define nIRQ_USB_INT0 0x0 +#define IRQ_USB_INT1 0x1000 /* USB Interrupt 1 */ +#define nIRQ_USB_INT1 0x0 +#define IRQ_USB_INT2 0x2000 /* USB Interrupt 2 */ +#define nIRQ_USB_INT2 0x0 +#define IRQ_USB_DMAINT 0x4000 /* USB DMA */ +#define nIRQ_USB_DMAINT 0x0 +#define IRQ_OTPSEC 0x8000 /* OTP Access Complete */ +#define nIRQ_OTPSEC 0x0 +#define IRQ_TIMER0 0x400000 /* Timer 0 */ +#define nIRQ_TIMER0 0x0 +#define IRQ_TIMER1 0x800000 /* Timer 1 */ +#define nIRQ_TIMER1 0x0 +#define IRQ_TIMER2 0x1000000 /* Timer 2 */ +#define nIRQ_TIMER2 0x0 +#define IRQ_TIMER3 0x2000000 /* Timer 3 */ +#define nIRQ_TIMER3 0x0 +#define IRQ_TIMER4 0x4000000 /* Timer 4 */ +#define nIRQ_TIMER4 0x0 +#define IRQ_TIMER5 0x8000000 /* Timer 5 */ +#define nIRQ_TIMER5 0x0 +#define IRQ_TIMER6 0x10000000 /* Timer 6 */ +#define nIRQ_TIMER6 0x0 +#define IRQ_TIMER7 0x20000000 /* Timer 7 */ +#define nIRQ_TIMER7 0x0 +#define IRQ_PINT2 0x40000000 /* Pin Interrupt 2 */ +#define nIRQ_PINT2 0x0 +#define IRQ_PINT3 0x80000000 /* Pin Interrupt 3 */ +#define nIRQ_PINT3 0x0 + +/* Bit masks for DMAx_CONFIG, MDMA_Sx_CONFIG, MDMA_Dx_CONFIG */ + +#define DMAEN 0x1 /* DMA Channel Enable */ +#define nDMAEN 0x0 +#define WNR 0x2 /* DMA Direction */ +#define nWNR 0x0 +#define WDSIZE 0xc /* Transfer Word Size */ +#define DMA2D 0x10 /* DMA Mode */ +#define nDMA2D 0x0 +#define RESTART 0x20 /* Work Unit Transitions */ +#define nRESTART 0x0 +#define DI_SEL 0x40 /* Data Interrupt Timing Select */ +#define nDI_SEL 0x0 +#define DI_EN 0x80 /* Data Interrupt Enable */ +#define nDI_EN 0x0 +#define NDSIZE 0xf00 /* Flex Descriptor Size */ +#define DMAFLOW 0xf000 /* Next Operation */ + +/* Bit masks for DMAx_IRQ_STATUS, MDMA_Sx_IRQ_STATUS, MDMA_Dx_IRQ_STATUS */ + +#define DMA_DONE 0x1 /* DMA Completion Interrupt Status */ +#define nDMA_DONE 0x0 +#define DMA_ERR 0x2 /* DMA Error Interrupt Status */ +#define nDMA_ERR 0x0 +#define DFETCH 0x4 /* DMA Descriptor Fetch */ +#define nDFETCH 0x0 +#define DMA_RUN 0x8 /* DMA Channel Running */ +#define nDMA_RUN 0x0 + +/* Bit masks for DMAx_PERIPHERAL_MAP, MDMA_Sx_IRQ_STATUS, MDMA_Dx_IRQ_STATUS */ + +#define CTYPE 0x40 /* DMA Channel Type */ +#define nCTYPE 0x0 +#define PMAP 0xf000 /* Peripheral Mapped To This Channel */ + +/* Bit masks for DMACx_TCPER */ + +#define DCB_TRAFFIC_PERIOD 0xf /* DCB Traffic Control Period */ +#define DEB_TRAFFIC_PERIOD 0xf0 /* DEB Traffic Control Period */ +#define DAB_TRAFFIC_PERIOD 0x700 /* DAB Traffic Control Period */ +#define MDMA_ROUND_ROBIN_PERIOD 0xf800 /* MDMA Round Robin Period */ + +/* Bit masks for DMACx_TCCNT */ + +#define DCB_TRAFFIC_COUNT 0xf /* DCB Traffic Control Count */ +#define DEB_TRAFFIC_COUNT 0xf0 /* DEB Traffic Control Count */ +#define DAB_TRAFFIC_COUNT 0x700 /* DAB Traffic Control Count */ +#define MDMA_ROUND_ROBIN_COUNT 0xf800 /* MDMA Round Robin Count */ + +/* Bit masks for DMAC1_PERIMUX */ + +#define PMUXSDH 0x1 /* Peripheral Select for DMA22 channel */ +#define nPMUXSDH 0x0 + +/* Bit masks for EBIU_AMGCTL */ + +#define AMCKEN 0x1 /* Async Memory Enable */ +#define nAMCKEN 0x0 +#define AMBEN 0xe /* Async bank enable */ + +/* Bit masks for EBIU_AMBCTL0 */ + +#define B0RDYEN 0x1 /* Bank 0 ARDY Enable */ +#define nB0RDYEN 0x0 +#define B0RDYPOL 0x2 /* Bank 0 ARDY Polarity */ +#define nB0RDYPOL 0x0 +#define B0TT 0xc /* Bank 0 transition time */ +#define B0ST 0x30 /* Bank 0 Setup time */ +#define B0HT 0xc0 /* Bank 0 Hold time */ +#define B0RAT 0xf00 /* Bank 0 Read access time */ +#define B0WAT 0xf000 /* Bank 0 write access time */ +#define B1RDYEN 0x10000 /* Bank 1 ARDY Enable */ +#define nB1RDYEN 0x0 +#define B1RDYPOL 0x20000 /* Bank 1 ARDY Polarity */ +#define nB1RDYPOL 0x0 +#define B1TT 0xc0000 /* Bank 1 transition time */ +#define B1ST 0x300000 /* Bank 1 Setup time */ +#define B1HT 0xc00000 /* Bank 1 Hold time */ +#define B1RAT 0xf000000 /* Bank 1 Read access time */ +#define B1WAT 0xf0000000 /* Bank 1 write access time */ + +/* Bit masks for EBIU_AMBCTL1 */ + +#define B2RDYEN 0x1 /* Bank 2 ARDY Enable */ +#define nB2RDYEN 0x0 +#define B2RDYPOL 0x2 /* Bank 2 ARDY Polarity */ +#define nB2RDYPOL 0x0 +#define B2TT 0xc /* Bank 2 transition time */ +#define B2ST 0x30 /* Bank 2 Setup time */ +#define B2HT 0xc0 /* Bank 2 Hold time */ +#define B2RAT 0xf00 /* Bank 2 Read access time */ +#define B2WAT 0xf000 /* Bank 2 write access time */ +#define B3RDYEN 0x10000 /* Bank 3 ARDY Enable */ +#define nB3RDYEN 0x0 +#define B3RDYPOL 0x20000 /* Bank 3 ARDY Polarity */ +#define nB3RDYPOL 0x0 +#define B3TT 0xc0000 /* Bank 3 transition time */ +#define B3ST 0x300000 /* Bank 3 Setup time */ +#define B3HT 0xc00000 /* Bank 3 Hold time */ +#define B3RAT 0xf000000 /* Bank 3 Read access time */ +#define B3WAT 0xf0000000 /* Bank 3 write access time */ + +/* Bit masks for EBIU_MBSCTL */ + +#define AMSB0CTL 0x3 /* Async Memory Bank 0 select */ +#define AMSB1CTL 0xc /* Async Memory Bank 1 select */ +#define AMSB2CTL 0x30 /* Async Memory Bank 2 select */ +#define AMSB3CTL 0xc0 /* Async Memory Bank 3 select */ + +/* Bit masks for EBIU_MODE */ + +#define B0MODE 0x3 /* Async Memory Bank 0 Access Mode */ +#define B1MODE 0xc /* Async Memory Bank 1 Access Mode */ +#define B2MODE 0x30 /* Async Memory Bank 2 Access Mode */ +#define B3MODE 0xc0 /* Async Memory Bank 3 Access Mode */ + +/* Bit masks for EBIU_FCTL */ + +#define TESTSETLOCK 0x1 /* Test set lock */ +#define nTESTSETLOCK 0x0 +#define BCLK 0x6 /* Burst clock frequency */ +#define PGWS 0x38 /* Page wait states */ +#define PGSZ 0x40 /* Page size */ +#define nPGSZ 0x0 +#define RDDL 0x380 /* Read data delay */ + +/* Bit masks for EBIU_ARBSTAT */ + +#define ARBSTAT 0x1 /* Arbitration status */ +#define nARBSTAT 0x0 +#define BGSTAT 0x2 /* Bus grant status */ +#define nBGSTAT 0x0 + +/* Bit masks for EBIU_DDRCTL0 */ + +#define TREFI 0x3fff /* Refresh Interval */ +#define TRFC 0x3c000 /* Auto-refresh command period */ +#define TRP 0x3c0000 /* Pre charge-to-active command period */ +#define TRAS 0x3c00000 /* Min Active-to-pre charge time */ +#define TRC 0x3c000000 /* Active-to-active time */ + +/* Bit masks for EBIU_DDRCTL1 */ + +#define TRCD 0xf /* Active-to-Read/write delay */ +#define MRD 0xf0 /* Mode register set to active */ +#define TWR 0x300 /* Write Recovery time */ +#define DDRDATWIDTH 0x3000 /* DDR data width */ +#define EXTBANKS 0xc000 /* External banks */ +#define DDRDEVWIDTH 0x30000 /* DDR device width */ +#define DDRDEVSIZE 0xc0000 /* DDR device size */ +#define TWWTR 0xf0000000 /* Write-to-read delay */ + +/* Bit masks for EBIU_DDRCTL2 */ + +#define BURSTLENGTH 0x7 /* Burst length */ +#define CASLATENCY 0x70 /* CAS latency */ +#define DLLRESET 0x100 /* DLL Reset */ +#define nDLLRESET 0x0 +#define REGE 0x1000 /* Register mode enable */ +#define nREGE 0x0 + +/* Bit masks for EBIU_DDRCTL3 */ + +#define PASR 0x7 /* Partial array self-refresh */ + +/* Bit masks for EBIU_DDRQUE */ + +#define DEB1_PFLEN 0x3 /* Pre fetch length for DEB1 accesses */ +#define DEB2_PFLEN 0xc /* Pre fetch length for DEB2 accesses */ +#define DEB3_PFLEN 0x30 /* Pre fetch length for DEB3 accesses */ +#define DEB_ARB_PRIORITY 0x700 /* Arbitration between DEB busses */ +#define DEB1_URGENT 0x1000 /* DEB1 Urgent */ +#define nDEB1_URGENT 0x0 +#define DEB2_URGENT 0x2000 /* DEB2 Urgent */ +#define nDEB2_URGENT 0x0 +#define DEB3_URGENT 0x4000 /* DEB3 Urgent */ +#define nDEB3_URGENT 0x0 + +/* Bit masks for EBIU_ERRMST */ + +#define DEB1_ERROR 0x1 /* DEB1 Error */ +#define nDEB1_ERROR 0x0 +#define DEB2_ERROR 0x2 /* DEB2 Error */ +#define nDEB2_ERROR 0x0 +#define DEB3_ERROR 0x4 /* DEB3 Error */ +#define nDEB3_ERROR 0x0 +#define CORE_ERROR 0x8 /* Core error */ +#define nCORE_ERROR 0x0 +#define DEB_MERROR 0x10 /* DEB1 Error (2nd) */ +#define nDEB_MERROR 0x0 +#define DEB2_MERROR 0x20 /* DEB2 Error (2nd) */ +#define nDEB2_MERROR 0x0 +#define DEB3_MERROR 0x40 /* DEB3 Error (2nd) */ +#define nDEB3_MERROR 0x0 +#define CORE_MERROR 0x80 /* Core Error (2nd) */ +#define nCORE_MERROR 0x0 + +/* Bit masks for EBIU_ERRADD */ + +#define ERROR_ADDRESS 0xffffffff /* Error Address */ + +/* Bit masks for EBIU_RSTCTL */ + +#define DDRSRESET 0x1 /* DDR soft reset */ +#define nDDRSRESET 0x0 +#define PFTCHSRESET 0x4 /* DDR prefetch reset */ +#define nPFTCHSRESET 0x0 +#define SRREQ 0x8 /* Self-refresh request */ +#define nSRREQ 0x0 +#define SRACK 0x10 /* Self-refresh acknowledge */ +#define nSRACK 0x0 +#define MDDRENABLE 0x20 /* Mobile DDR enable */ +#define nMDDRENABLE 0x0 + +/* Bit masks for EBIU_DDRBRC0 */ + +#define BRC0 0xffffffff /* Count */ + +/* Bit masks for EBIU_DDRBRC1 */ + +#define BRC1 0xffffffff /* Count */ + +/* Bit masks for EBIU_DDRBRC2 */ + +#define BRC2 0xffffffff /* Count */ + +/* Bit masks for EBIU_DDRBRC3 */ + +#define BRC3 0xffffffff /* Count */ + +/* Bit masks for EBIU_DDRBRC4 */ + +#define BRC4 0xffffffff /* Count */ + +/* Bit masks for EBIU_DDRBRC5 */ + +#define BRC5 0xffffffff /* Count */ + +/* Bit masks for EBIU_DDRBRC6 */ + +#define BRC6 0xffffffff /* Count */ + +/* Bit masks for EBIU_DDRBRC7 */ + +#define BRC7 0xffffffff /* Count */ + +/* Bit masks for EBIU_DDRBWC0 */ + +#define BWC0 0xffffffff /* Count */ + +/* Bit masks for EBIU_DDRBWC1 */ + +#define BWC1 0xffffffff /* Count */ + +/* Bit masks for EBIU_DDRBWC2 */ + +#define BWC2 0xffffffff /* Count */ + +/* Bit masks for EBIU_DDRBWC3 */ + +#define BWC3 0xffffffff /* Count */ + +/* Bit masks for EBIU_DDRBWC4 */ + +#define BWC4 0xffffffff /* Count */ + +/* Bit masks for EBIU_DDRBWC5 */ + +#define BWC5 0xffffffff /* Count */ + +/* Bit masks for EBIU_DDRBWC6 */ + +#define BWC6 0xffffffff /* Count */ + +/* Bit masks for EBIU_DDRBWC7 */ + +#define BWC7 0xffffffff /* Count */ + +/* Bit masks for EBIU_DDRACCT */ + +#define ACCT 0xffffffff /* Count */ + +/* Bit masks for EBIU_DDRTACT */ + +#define TECT 0xffffffff /* Count */ + +/* Bit masks for EBIU_DDRARCT */ + +#define ARCT 0xffffffff /* Count */ + +/* Bit masks for EBIU_DDRGC0 */ + +#define GC0 0xffffffff /* Count */ + +/* Bit masks for EBIU_DDRGC1 */ + +#define GC1 0xffffffff /* Count */ + +/* Bit masks for EBIU_DDRGC2 */ + +#define GC2 0xffffffff /* Count */ + +/* Bit masks for EBIU_DDRGC3 */ + +#define GC3 0xffffffff /* Count */ + +/* Bit masks for EBIU_DDRMCEN */ + +#define B0WCENABLE 0x1 /* Bank 0 write count enable */ +#define nB0WCENABLE 0x0 +#define B1WCENABLE 0x2 /* Bank 1 write count enable */ +#define nB1WCENABLE 0x0 +#define B2WCENABLE 0x4 /* Bank 2 write count enable */ +#define nB2WCENABLE 0x0 +#define B3WCENABLE 0x8 /* Bank 3 write count enable */ +#define nB3WCENABLE 0x0 +#define B4WCENABLE 0x10 /* Bank 4 write count enable */ +#define nB4WCENABLE 0x0 +#define B5WCENABLE 0x20 /* Bank 5 write count enable */ +#define nB5WCENABLE 0x0 +#define B6WCENABLE 0x40 /* Bank 6 write count enable */ +#define nB6WCENABLE 0x0 +#define B7WCENABLE 0x80 /* Bank 7 write count enable */ +#define nB7WCENABLE 0x0 +#define B0RCENABLE 0x100 /* Bank 0 read count enable */ +#define nB0RCENABLE 0x0 +#define B1RCENABLE 0x200 /* Bank 1 read count enable */ +#define nB1RCENABLE 0x0 +#define B2RCENABLE 0x400 /* Bank 2 read count enable */ +#define nB2RCENABLE 0x0 +#define B3RCENABLE 0x800 /* Bank 3 read count enable */ +#define nB3RCENABLE 0x0 +#define B4RCENABLE 0x1000 /* Bank 4 read count enable */ +#define nB4RCENABLE 0x0 +#define B5RCENABLE 0x2000 /* Bank 5 read count enable */ +#define nB5RCENABLE 0x0 +#define B6RCENABLE 0x4000 /* Bank 6 read count enable */ +#define nB6RCENABLE 0x0 +#define B7RCENABLE 0x8000 /* Bank 7 read count enable */ +#define nB7RCENABLE 0x0 +#define ROWACTCENABLE 0x10000 /* DDR Row activate count enable */ +#define nROWACTCENABLE 0x0 +#define RWTCENABLE 0x20000 /* DDR R/W Turn around count enable */ +#define nRWTCENABLE 0x0 +#define ARCENABLE 0x40000 /* DDR Auto-refresh count enable */ +#define nARCENABLE 0x0 +#define GC0ENABLE 0x100000 /* DDR Grant count 0 enable */ +#define nGC0ENABLE 0x0 +#define GC1ENABLE 0x200000 /* DDR Grant count 1 enable */ +#define nGC1ENABLE 0x0 +#define GC2ENABLE 0x400000 /* DDR Grant count 2 enable */ +#define nGC2ENABLE 0x0 +#define GC3ENABLE 0x800000 /* DDR Grant count 3 enable */ +#define nGC3ENABLE 0x0 +#define GCCONTROL 0x3000000 /* DDR Grant Count Control */ + +/* Bit masks for EBIU_DDRMCCL */ + +#define CB0WCOUNT 0x1 /* Clear write count 0 */ +#define nCB0WCOUNT 0x0 +#define CB1WCOUNT 0x2 /* Clear write count 1 */ +#define nCB1WCOUNT 0x0 +#define CB2WCOUNT 0x4 /* Clear write count 2 */ +#define nCB2WCOUNT 0x0 +#define CB3WCOUNT 0x8 /* Clear write count 3 */ +#define nCB3WCOUNT 0x0 +#define CB4WCOUNT 0x10 /* Clear write count 4 */ +#define nCB4WCOUNT 0x0 +#define CB5WCOUNT 0x20 /* Clear write count 5 */ +#define nCB5WCOUNT 0x0 +#define CB6WCOUNT 0x40 /* Clear write count 6 */ +#define nCB6WCOUNT 0x0 +#define CB7WCOUNT 0x80 /* Clear write count 7 */ +#define nCB7WCOUNT 0x0 +#define CBRCOUNT 0x100 /* Clear read count 0 */ +#define nCBRCOUNT 0x0 +#define CB1RCOUNT 0x200 /* Clear read count 1 */ +#define nCB1RCOUNT 0x0 +#define CB2RCOUNT 0x400 /* Clear read count 2 */ +#define nCB2RCOUNT 0x0 +#define CB3RCOUNT 0x800 /* Clear read count 3 */ +#define nCB3RCOUNT 0x0 +#define CB4RCOUNT 0x1000 /* Clear read count 4 */ +#define nCB4RCOUNT 0x0 +#define CB5RCOUNT 0x2000 /* Clear read count 5 */ +#define nCB5RCOUNT 0x0 +#define CB6RCOUNT 0x4000 /* Clear read count 6 */ +#define nCB6RCOUNT 0x0 +#define CB7RCOUNT 0x8000 /* Clear read count 7 */ +#define nCB7RCOUNT 0x0 +#define CRACOUNT 0x10000 /* Clear row activation count */ +#define nCRACOUNT 0x0 +#define CRWTACOUNT 0x20000 /* Clear R/W turn-around count */ +#define nCRWTACOUNT 0x0 +#define CARCOUNT 0x40000 /* Clear auto-refresh count */ +#define nCARCOUNT 0x0 +#define CG0COUNT 0x100000 /* Clear grant count 0 */ +#define nCG0COUNT 0x0 +#define CG1COUNT 0x200000 /* Clear grant count 1 */ +#define nCG1COUNT 0x0 +#define CG2COUNT 0x400000 /* Clear grant count 2 */ +#define nCG2COUNT 0x0 +#define CG3COUNT 0x800000 /* Clear grant count 3 */ +#define nCG3COUNT 0x0 + +/* Bit masks for (PORTx is PORTA - PORTJ) includes PORTx_FER, PORTx_SET, PORTx_CLEAR, PORTx_DIR_SET, PORTx_DIR_CLEAR, PORTx_INEN */ + +#define Px0 0x1 /* GPIO 0 */ +#define nPx0 0x0 +#define Px1 0x2 /* GPIO 1 */ +#define nPx1 0x0 +#define Px2 0x4 /* GPIO 2 */ +#define nPx2 0x0 +#define Px3 0x8 /* GPIO 3 */ +#define nPx3 0x0 +#define Px4 0x10 /* GPIO 4 */ +#define nPx4 0x0 +#define Px5 0x20 /* GPIO 5 */ +#define nPx5 0x0 +#define Px6 0x40 /* GPIO 6 */ +#define nPx6 0x0 +#define Px7 0x80 /* GPIO 7 */ +#define nPx7 0x0 +#define Px8 0x100 /* GPIO 8 */ +#define nPx8 0x0 +#define Px9 0x200 /* GPIO 9 */ +#define nPx9 0x0 +#define Px10 0x400 /* GPIO 10 */ +#define nPx10 0x0 +#define Px11 0x800 /* GPIO 11 */ +#define nPx11 0x0 +#define Px12 0x1000 /* GPIO 12 */ +#define nPx12 0x0 +#define Px13 0x2000 /* GPIO 13 */ +#define nPx13 0x0 +#define Px14 0x4000 /* GPIO 14 */ +#define nPx14 0x0 +#define Px15 0x8000 /* GPIO 15 */ +#define nPx15 0x0 + +/* Bit masks for PORTA_MUX - PORTJ_MUX */ + +#define PxM0 0x3 /* GPIO Mux 0 */ +#define PxM1 0xc /* GPIO Mux 1 */ +#define PxM2 0x30 /* GPIO Mux 2 */ +#define PxM3 0xc0 /* GPIO Mux 3 */ +#define PxM4 0x300 /* GPIO Mux 4 */ +#define PxM5 0xc00 /* GPIO Mux 5 */ +#define PxM6 0x3000 /* GPIO Mux 6 */ +#define PxM7 0xc000 /* GPIO Mux 7 */ +#define PxM8 0x30000 /* GPIO Mux 8 */ +#define PxM9 0xc0000 /* GPIO Mux 9 */ +#define PxM10 0x300000 /* GPIO Mux 10 */ +#define PxM11 0xc00000 /* GPIO Mux 11 */ +#define PxM12 0x3000000 /* GPIO Mux 12 */ +#define PxM13 0xc000000 /* GPIO Mux 13 */ +#define PxM14 0x30000000 /* GPIO Mux 14 */ +#define PxM15 0xc0000000 /* GPIO Mux 15 */ + + +/* Bit masks for PINTx_MASK_SET/CLEAR, PINTx_REQUEST, PINTx_LATCH, PINTx_EDGE_SET/CLEAR, PINTx_INVERT_SET/CLEAR, PINTx_PINTSTATE */ + +#define IB0 0x1 /* Interrupt Bit 0 */ +#define nIB0 0x0 +#define IB1 0x2 /* Interrupt Bit 1 */ +#define nIB1 0x0 +#define IB2 0x4 /* Interrupt Bit 2 */ +#define nIB2 0x0 +#define IB3 0x8 /* Interrupt Bit 3 */ +#define nIB3 0x0 +#define IB4 0x10 /* Interrupt Bit 4 */ +#define nIB4 0x0 +#define IB5 0x20 /* Interrupt Bit 5 */ +#define nIB5 0x0 +#define IB6 0x40 /* Interrupt Bit 6 */ +#define nIB6 0x0 +#define IB7 0x80 /* Interrupt Bit 7 */ +#define nIB7 0x0 +#define IB8 0x100 /* Interrupt Bit 8 */ +#define nIB8 0x0 +#define IB9 0x200 /* Interrupt Bit 9 */ +#define nIB9 0x0 +#define IB10 0x400 /* Interrupt Bit 10 */ +#define nIB10 0x0 +#define IB11 0x800 /* Interrupt Bit 11 */ +#define nIB11 0x0 +#define IB12 0x1000 /* Interrupt Bit 12 */ +#define nIB12 0x0 +#define IB13 0x2000 /* Interrupt Bit 13 */ +#define nIB13 0x0 +#define IB14 0x4000 /* Interrupt Bit 14 */ +#define nIB14 0x0 +#define IB15 0x8000 /* Interrupt Bit 15 */ +#define nIB15 0x0 + +/* Bit masks for TIMERx_CONFIG */ + +#define TMODE 0x3 /* Timer Mode */ +#define PULSE_HI 0x4 /* Pulse Polarity */ +#define nPULSE_HI 0x0 +#define PERIOD_CNT 0x8 /* Period Count */ +#define nPERIOD_CNT 0x0 +#define IRQ_ENA 0x10 /* Interrupt Request Enable */ +#define nIRQ_ENA 0x0 +#define TIN_SEL 0x20 /* Timer Input Select */ +#define nTIN_SEL 0x0 +#define OUT_DIS 0x40 /* Output Pad Disable */ +#define nOUT_DIS 0x0 +#define CLK_SEL 0x80 /* Timer Clock Select */ +#define nCLK_SEL 0x0 +#define TOGGLE_HI 0x100 /* Toggle Mode */ +#define nTOGGLE_HI 0x0 +#define EMU_RUN 0x200 /* Emulation Behavior Select */ +#define nEMU_RUN 0x0 +#define ERR_TYP 0xc000 /* Error Type */ + +/* Bit masks for TIMER_ENABLE0 */ + +#define TIMEN0 0x1 /* Timer 0 Enable */ +#define nTIMEN0 0x0 +#define TIMEN1 0x2 /* Timer 1 Enable */ +#define nTIMEN1 0x0 +#define TIMEN2 0x4 /* Timer 2 Enable */ +#define nTIMEN2 0x0 +#define TIMEN3 0x8 /* Timer 3 Enable */ +#define nTIMEN3 0x0 +#define TIMEN4 0x10 /* Timer 4 Enable */ +#define nTIMEN4 0x0 +#define TIMEN5 0x20 /* Timer 5 Enable */ +#define nTIMEN5 0x0 +#define TIMEN6 0x40 /* Timer 6 Enable */ +#define nTIMEN6 0x0 +#define TIMEN7 0x80 /* Timer 7 Enable */ +#define nTIMEN7 0x0 + +/* Bit masks for TIMER_DISABLE0 */ + +#define TIMDIS0 0x1 /* Timer 0 Disable */ +#define nTIMDIS0 0x0 +#define TIMDIS1 0x2 /* Timer 1 Disable */ +#define nTIMDIS1 0x0 +#define TIMDIS2 0x4 /* Timer 2 Disable */ +#define nTIMDIS2 0x0 +#define TIMDIS3 0x8 /* Timer 3 Disable */ +#define nTIMDIS3 0x0 +#define TIMDIS4 0x10 /* Timer 4 Disable */ +#define nTIMDIS4 0x0 +#define TIMDIS5 0x20 /* Timer 5 Disable */ +#define nTIMDIS5 0x0 +#define TIMDIS6 0x40 /* Timer 6 Disable */ +#define nTIMDIS6 0x0 +#define TIMDIS7 0x80 /* Timer 7 Disable */ +#define nTIMDIS7 0x0 + +/* Bit masks for TIMER_STATUS0 */ + +#define TIMIL0 0x1 /* Timer 0 Interrupt */ +#define nTIMIL0 0x0 +#define TIMIL1 0x2 /* Timer 1 Interrupt */ +#define nTIMIL1 0x0 +#define TIMIL2 0x4 /* Timer 2 Interrupt */ +#define nTIMIL2 0x0 +#define TIMIL3 0x8 /* Timer 3 Interrupt */ +#define nTIMIL3 0x0 +#define TOVF_ERR0 0x10 /* Timer 0 Counter Overflow */ +#define nTOVF_ERR0 0x0 +#define TOVF_ERR1 0x20 /* Timer 1 Counter Overflow */ +#define nTOVF_ERR1 0x0 +#define TOVF_ERR2 0x40 /* Timer 2 Counter Overflow */ +#define nTOVF_ERR2 0x0 +#define TOVF_ERR3 0x80 /* Timer 3 Counter Overflow */ +#define nTOVF_ERR3 0x0 +#define TRUN0 0x1000 /* Timer 0 Slave Enable Status */ +#define nTRUN0 0x0 +#define TRUN1 0x2000 /* Timer 1 Slave Enable Status */ +#define nTRUN1 0x0 +#define TRUN2 0x4000 /* Timer 2 Slave Enable Status */ +#define nTRUN2 0x0 +#define TRUN3 0x8000 /* Timer 3 Slave Enable Status */ +#define nTRUN3 0x0 +#define TIMIL4 0x10000 /* Timer 4 Interrupt */ +#define nTIMIL4 0x0 +#define TIMIL5 0x20000 /* Timer 5 Interrupt */ +#define nTIMIL5 0x0 +#define TIMIL6 0x40000 /* Timer 6 Interrupt */ +#define nTIMIL6 0x0 +#define TIMIL7 0x80000 /* Timer 7 Interrupt */ +#define nTIMIL7 0x0 +#define TOVF_ERR4 0x100000 /* Timer 4 Counter Overflow */ +#define nTOVF_ERR4 0x0 +#define TOVF_ERR5 0x200000 /* Timer 5 Counter Overflow */ +#define nTOVF_ERR5 0x0 +#define TOVF_ERR6 0x400000 /* Timer 6 Counter Overflow */ +#define nTOVF_ERR6 0x0 +#define TOVF_ERR7 0x800000 /* Timer 7 Counter Overflow */ +#define nTOVF_ERR7 0x0 +#define TRUN4 0x10000000 /* Timer 4 Slave Enable Status */ +#define nTRUN4 0x0 +#define TRUN5 0x20000000 /* Timer 5 Slave Enable Status */ +#define nTRUN5 0x0 +#define TRUN6 0x40000000 /* Timer 6 Slave Enable Status */ +#define nTRUN6 0x0 +#define TRUN7 0x80000000 /* Timer 7 Slave Enable Status */ +#define nTRUN7 0x0 + +/* Bit masks for WDOG_CTL */ + +#define WDEV 0x6 /* Watchdog Event */ +#define WDEN 0xff0 /* Watchdog Enable */ +#define WDRO 0x8000 /* Watchdog Rolled Over */ +#define nWDRO 0x0 + +/* Bit masks for CNT_CONFIG */ + +#define CNTE 0x1 /* Counter Enable */ +#define nCNTE 0x0 +#define DEBE 0x2 /* Debounce Enable */ +#define nDEBE 0x0 +#define CDGINV 0x10 /* CDG Pin Polarity Invert */ +#define nCDGINV 0x0 +#define CUDINV 0x20 /* CUD Pin Polarity Invert */ +#define nCUDINV 0x0 +#define CZMINV 0x40 /* CZM Pin Polarity Invert */ +#define nCZMINV 0x0 +#define CNTMODE 0x700 /* Counter Operating Mode */ +#define ZMZC 0x800 /* CZM Zeroes Counter Enable */ +#define nZMZC 0x0 +#define BNDMODE 0x3000 /* Boundary register Mode */ +#define INPDIS 0x8000 /* CUG and CDG Input Disable */ +#define nINPDIS 0x0 + +/* Bit masks for CNT_IMASK */ + +#define ICIE 0x1 /* Illegal Gray/Binary Code Interrupt Enable */ +#define nICIE 0x0 +#define UCIE 0x2 /* Up count Interrupt Enable */ +#define nUCIE 0x0 +#define DCIE 0x4 /* Down count Interrupt Enable */ +#define nDCIE 0x0 +#define MINCIE 0x8 /* Min Count Interrupt Enable */ +#define nMINCIE 0x0 +#define MAXCIE 0x10 /* Max Count Interrupt Enable */ +#define nMAXCIE 0x0 +#define COV31IE 0x20 /* Bit 31 Overflow Interrupt Enable */ +#define nCOV31IE 0x0 +#define COV15IE 0x40 /* Bit 15 Overflow Interrupt Enable */ +#define nCOV15IE 0x0 +#define CZEROIE 0x80 /* Count to Zero Interrupt Enable */ +#define nCZEROIE 0x0 +#define CZMIE 0x100 /* CZM Pin Interrupt Enable */ +#define nCZMIE 0x0 +#define CZMEIE 0x200 /* CZM Error Interrupt Enable */ +#define nCZMEIE 0x0 +#define CZMZIE 0x400 /* CZM Zeroes Counter Interrupt Enable */ +#define nCZMZIE 0x0 + +/* Bit masks for CNT_STATUS */ + +#define ICII 0x1 /* Illegal Gray/Binary Code Interrupt Identifier */ +#define nICII 0x0 +#define UCII 0x2 /* Up count Interrupt Identifier */ +#define nUCII 0x0 +#define DCII 0x4 /* Down count Interrupt Identifier */ +#define nDCII 0x0 +#define MINCII 0x8 /* Min Count Interrupt Identifier */ +#define nMINCII 0x0 +#define MAXCII 0x10 /* Max Count Interrupt Identifier */ +#define nMAXCII 0x0 +#define COV31II 0x20 /* Bit 31 Overflow Interrupt Identifier */ +#define nCOV31II 0x0 +#define COV15II 0x40 /* Bit 15 Overflow Interrupt Identifier */ +#define nCOV15II 0x0 +#define CZEROII 0x80 /* Count to Zero Interrupt Identifier */ +#define nCZEROII 0x0 +#define CZMII 0x100 /* CZM Pin Interrupt Identifier */ +#define nCZMII 0x0 +#define CZMEII 0x200 /* CZM Error Interrupt Identifier */ +#define nCZMEII 0x0 +#define CZMZII 0x400 /* CZM Zeroes Counter Interrupt Identifier */ +#define nCZMZII 0x0 + +/* Bit masks for CNT_COMMAND */ + +#define W1LCNT 0xf /* Load Counter Register */ +#define W1LMIN 0xf0 /* Load Min Register */ +#define W1LMAX 0xf00 /* Load Max Register */ +#define W1ZMONCE 0x1000 /* Enable CZM Clear Counter Once */ +#define nW1ZMONCE 0x0 + +/* Bit masks for CNT_DEBOUNCE */ + +#define DPRESCALE 0xf /* Load Counter Register */ + +/* Bit masks for RTC_STAT */ + +#define SECONDS 0x3f /* Seconds */ +#define MINUTES 0xfc0 /* Minutes */ +#define HOURS 0x1f000 /* Hours */ +#define DAY_COUNTER 0xfffe0000 /* Day Counter */ + +/* Bit masks for RTC_ICTL */ + +#define STOPWATCH_INTERRUPT_ENABLE 0x1 /* Stopwatch Interrupt Enable */ +#define nSTOPWATCH_INTERRUPT_ENABLE 0x0 +#define ALARM_INTERRUPT_ENABLE 0x2 /* Alarm Interrupt Enable */ +#define nALARM_INTERRUPT_ENABLE 0x0 +#define SECONDS_INTERRUPT_ENABLE 0x4 /* Seconds Interrupt Enable */ +#define nSECONDS_INTERRUPT_ENABLE 0x0 +#define MINUTES_INTERRUPT_ENABLE 0x8 /* Minutes Interrupt Enable */ +#define nMINUTES_INTERRUPT_ENABLE 0x0 +#define HOURS_INTERRUPT_ENABLE 0x10 /* Hours Interrupt Enable */ +#define nHOURS_INTERRUPT_ENABLE 0x0 +#define TWENTY_FOUR_HOURS_INTERRUPT_ENABLE 0x20 /* 24 Hours Interrupt Enable */ +#define nTWENTY_FOUR_HOURS_INTERRUPT_ENABLE 0x0 +#define DAY_ALARM_INTERRUPT_ENABLE 0x40 /* Day Alarm Interrupt Enable */ +#define nDAY_ALARM_INTERRUPT_ENABLE 0x0 +#define WRITE_COMPLETE_INTERRUPT_ENABLE 0x8000 /* Write Complete Interrupt Enable */ +#define nWRITE_COMPLETE_INTERRUPT_ENABLE 0x0 + +/* Bit masks for RTC_ISTAT */ + +#define STOPWATCH_EVENT_FLAG 0x1 /* Stopwatch Event Flag */ +#define nSTOPWATCH_EVENT_FLAG 0x0 +#define ALARM_EVENT_FLAG 0x2 /* Alarm Event Flag */ +#define nALARM_EVENT_FLAG 0x0 +#define SECONDS_EVENT_FLAG 0x4 /* Seconds Event Flag */ +#define nSECONDS_EVENT_FLAG 0x0 +#define MINUTES_EVENT_FLAG 0x8 /* Minutes Event Flag */ +#define nMINUTES_EVENT_FLAG 0x0 +#define HOURS_EVENT_FLAG 0x10 /* Hours Event Flag */ +#define nHOURS_EVENT_FLAG 0x0 +#define TWENTY_FOUR_HOURS_EVENT_FLAG 0x20 /* 24 Hours Event Flag */ +#define nTWENTY_FOUR_HOURS_EVENT_FLAG 0x0 +#define DAY_ALARM_EVENT_FLAG 0x40 /* Day Alarm Event Flag */ +#define nDAY_ALARM_EVENT_FLAG 0x0 +#define WRITE_PENDING__STATUS 0x4000 /* Write Pending Status */ +#define nWRITE_PENDING__STATUS 0x0 +#define WRITE_COMPLETE 0x8000 /* Write Complete */ +#define nWRITE_COMPLETE 0x0 + +/* Bit masks for RTC_SWCNT */ + +#define STOPWATCH_COUNT 0xffff /* Stopwatch Count */ + +/* Bit masks for RTC_ALARM */ + +#define SECONDS 0x3f /* Seconds */ +#define MINUTES 0xfc0 /* Minutes */ +#define HOURS 0x1f000 /* Hours */ +#define DAY 0xfffe0000 /* Day */ + +/* Bit masks for RTC_PREN */ + +#define PREN 0x1 /* Prescaler Enable */ +#define nPREN 0x0 + +/* Bit masks for OTP_CONTROL */ + +#define FUSE_FADDR 0x1ff /* OTP/Fuse Address */ +#define FIEN 0x800 /* OTP/Fuse Interrupt Enable */ +#define nFIEN 0x0 +#define FTESTDEC 0x1000 /* OTP/Fuse Test Decoder */ +#define nFTESTDEC 0x0 +#define FWRTEST 0x2000 /* OTP/Fuse Write Test */ +#define nFWRTEST 0x0 +#define FRDEN 0x4000 /* OTP/Fuse Read Enable */ +#define nFRDEN 0x0 +#define FWREN 0x8000 /* OTP/Fuse Write Enable */ +#define nFWREN 0x0 + +/* Bit masks for OTP_BEN */ + +#define FBEN 0xffff /* OTP/Fuse Byte Enable */ + +/* Bit masks for OTP_STATUS */ + +#define FCOMP 0x1 /* OTP/Fuse Access Complete */ +#define nFCOMP 0x0 +#define FERROR 0x2 /* OTP/Fuse Access Error */ +#define nFERROR 0x0 +#define MMRGLOAD 0x10 /* Memory Mapped Register Gasket Load */ +#define nMMRGLOAD 0x0 +#define MMRGLOCK 0x20 /* Memory Mapped Register Gasket Lock */ +#define nMMRGLOCK 0x0 +#define FPGMEN 0x40 /* OTP/Fuse Program Enable */ +#define nFPGMEN 0x0 + +/* Bit masks for OTP_TIMING */ + +#define USECDIV 0xff /* Micro Second Divider */ +#define READACC 0x7f00 /* Read Access Time */ +#define CPUMPRL 0x38000 /* Charge Pump Release Time */ +#define CPUMPSU 0xc0000 /* Charge Pump Setup Time */ +#define CPUMPHD 0xf00000 /* Charge Pump Hold Time */ +#define PGMTIME 0xff000000 /* Program Time */ + +/* Bit masks for SECURE_SYSSWT */ + +#define EMUDABL 0x1 /* Emulation Disable. */ +#define nEMUDABL 0x0 +#define RSTDABL 0x2 /* Reset Disable */ +#define nRSTDABL 0x0 +#define L1IDABL 0x1c /* L1 Instruction Memory Disable. */ +#define L1DADABL 0xe0 /* L1 Data Bank A Memory Disable. */ +#define L1DBDABL 0x700 /* L1 Data Bank B Memory Disable. */ +#define DMA0OVR 0x800 /* DMA0 Memory Access Override */ +#define nDMA0OVR 0x0 +#define DMA1OVR 0x1000 /* DMA1 Memory Access Override */ +#define nDMA1OVR 0x0 +#define EMUOVR 0x4000 /* Emulation Override */ +#define nEMUOVR 0x0 +#define OTPSEN 0x8000 /* OTP Secrets Enable. */ +#define nOTPSEN 0x0 +#define L2DABL 0x70000 /* L2 Memory Disable. */ + +/* Bit masks for SECURE_CONTROL */ + +#define SECURE0 0x1 /* SECURE 0 */ +#define nSECURE0 0x0 +#define SECURE1 0x2 /* SECURE 1 */ +#define nSECURE1 0x0 +#define SECURE2 0x4 /* SECURE 2 */ +#define nSECURE2 0x0 +#define SECURE3 0x8 /* SECURE 3 */ +#define nSECURE3 0x0 + +/* Bit masks for SECURE_STATUS */ + +#define SECMODE 0x3 /* Secured Mode Control State */ +#define NMI 0x4 /* Non Maskable Interrupt */ +#define nNMI 0x0 +#define AFVALID 0x8 /* Authentication Firmware Valid */ +#define nAFVALID 0x0 +#define AFEXIT 0x10 /* Authentication Firmware Exit */ +#define nAFEXIT 0x0 +#define SECSTAT 0xe0 /* Secure Status */ + +/* Bit masks for PLL_DIV */ + +#define CSEL 0x30 /* Core Select */ +#define SSEL 0xf /* System Select */ + +/* Bit masks for PLL_CTL */ + +#define MSEL 0x7e00 /* Multiplier Select */ +#define BYPASS 0x100 /* PLL Bypass Enable */ +#define nBYPASS 0x0 +#define OUTPUT_DELAY 0x80 /* External Memory Output Delay Enable */ +#define nOUTPUT_DELAY 0x0 +#define INPUT_DELAY 0x40 /* External Memory Input Delay Enable */ +#define nINPUT_DELAY 0x0 +#define PDWN 0x20 /* Power Down */ +#define nPDWN 0x0 +#define STOPCK 0x8 /* Stop Clock */ +#define nSTOPCK 0x0 +#define PLL_OFF 0x2 /* Disable PLL */ +#define nPLL_OFF 0x0 +#define DF 0x1 /* Divide Frequency */ +#define nDF 0x0 + +/* Bit masks for PLL_STAT */ + +#define PLL_LOCKED 0x20 /* PLL Locked Status */ +#define nPLL_LOCKED 0x0 +#define ACTIVE_PLLDISABLED 0x4 /* Active Mode With PLL Disabled */ +#define nACTIVE_PLLDISABLED 0x0 +#define FULL_ON 0x2 /* Full-On Mode */ +#define nFULL_ON 0x0 +#define ACTIVE_PLLENABLED 0x1 /* Active Mode With PLL Enabled */ +#define nACTIVE_PLLENABLED 0x0 +#define RTCWS 0x400 /* RTC/Reset Wake-Up Status */ +#define nRTCWS 0x0 +#define CANWS 0x800 /* CAN Wake-Up Status */ +#define nCANWS 0x0 +#define USBWS 0x2000 /* USB Wake-Up Status */ +#define nUSBWS 0x0 +#define KPADWS 0x4000 /* Keypad Wake-Up Status */ +#define nKPADWS 0x0 +#define ROTWS 0x8000 /* Rotary Wake-Up Status */ +#define nROTWS 0x0 +#define GPWS 0x1000 /* General-Purpose Wake-Up Status */ +#define nGPWS 0x0 + +/* Bit masks for VR_CTL */ + +#define FREQ 0x3 /* Regulator Switching Frequency */ +#define GAIN 0xc /* Voltage Output Level Gain */ +#define VLEV 0xf0 /* Internal Voltage Level */ +#define SCKELOW 0x8000 /* Drive SCKE Low During Reset Enable */ +#define nSCKELOW 0x0 +#define WAKE 0x100 /* RTC/Reset Wake-Up Enable */ +#define nWAKE 0x0 +#define CANWE 0x200 /* CAN0/1 Wake-Up Enable */ +#define nCANWE 0x0 +#define GPWE 0x400 /* General-Purpose Wake-Up Enable */ +#define nGPWE 0x0 +#define USBWE 0x800 /* USB Wake-Up Enable */ +#define nUSBWE 0x0 +#define KPADWE 0x1000 /* Keypad Wake-Up Enable */ +#define nKPADWE 0x0 +#define ROTWE 0x2000 /* Rotary Wake-Up Enable */ +#define nROTWE 0x0 + +/* Bit masks for NFC_CTL */ + +#define WR_DLY 0xf /* Write Strobe Delay */ +#define RD_DLY 0xf0 /* Read Strobe Delay */ +#define NWIDTH 0x100 /* NAND Data Width */ +#define nNWIDTH 0x0 +#define PG_SIZE 0x200 /* Page Size */ +#define nPG_SIZE 0x0 + +/* Bit masks for NFC_STAT */ + +#define NBUSY 0x1 /* Not Busy */ +#define nNBUSY 0x0 +#define WB_FULL 0x2 /* Write Buffer Full */ +#define nWB_FULL 0x0 +#define PG_WR_STAT 0x4 /* Page Write Pending */ +#define nPG_WR_STAT 0x0 +#define PG_RD_STAT 0x8 /* Page Read Pending */ +#define nPG_RD_STAT 0x0 +#define WB_EMPTY 0x10 /* Write Buffer Empty */ +#define nWB_EMPTY 0x0 + +/* Bit masks for NFC_IRQSTAT */ + +#define NBUSYIRQ 0x1 /* Not Busy IRQ */ +#define nNBUSYIRQ 0x0 +#define WB_OVF 0x2 /* Write Buffer Overflow */ +#define nWB_OVF 0x0 +#define WB_EDGE 0x4 /* Write Buffer Edge Detect */ +#define nWB_EDGE 0x0 +#define RD_RDY 0x8 /* Read Data Ready */ +#define nRD_RDY 0x0 +#define WR_DONE 0x10 /* Page Write Done */ +#define nWR_DONE 0x0 + +/* Bit masks for NFC_IRQMASK */ + +#define MASK_BUSYIRQ 0x1 /* Mask Not Busy IRQ */ +#define nMASK_BUSYIRQ 0x0 +#define MASK_WBOVF 0x2 /* Mask Write Buffer Overflow */ +#define nMASK_WBOVF 0x0 +#define MASK_WBEMPTY 0x4 /* Mask Write Buffer Empty */ +#define nMASK_WBEMPTY 0x0 +#define MASK_RDRDY 0x8 /* Mask Read Data Ready */ +#define nMASK_RDRDY 0x0 +#define MASK_WRDONE 0x10 /* Mask Write Done */ +#define nMASK_WRDONE 0x0 + +/* Bit masks for NFC_RST */ + +#define ECC_RST 0x1 /* ECC (and NFC counters) Reset */ +#define nECC_RST 0x0 + +/* Bit masks for NFC_PGCTL */ + +#define PG_RD_START 0x1 /* Page Read Start */ +#define nPG_RD_START 0x0 +#define PG_WR_START 0x2 /* Page Write Start */ +#define nPG_WR_START 0x0 + +/* Bit masks for NFC_ECC0 */ + +#define ECC0 0x7ff /* Parity Calculation Result0 */ + +/* Bit masks for NFC_ECC1 */ + +#define ECC1 0x7ff /* Parity Calculation Result1 */ + +/* Bit masks for NFC_ECC2 */ + +#define ECC2 0x7ff /* Parity Calculation Result2 */ + +/* Bit masks for NFC_ECC3 */ + +#define ECC3 0x7ff /* Parity Calculation Result3 */ + +/* Bit masks for NFC_COUNT */ + +#define ECCCNT 0x3ff /* Transfer Count */ + +/* Bit masks for CAN0_CONTROL */ + +#define SRS 0x1 /* Software Reset */ +#define nSRS 0x0 +#define DNM 0x2 /* DeviceNet Mode */ +#define nDNM 0x0 +#define ABO 0x4 /* Auto Bus On */ +#define nABO 0x0 +#define WBA 0x10 /* Wakeup On CAN Bus Activity */ +#define nWBA 0x0 +#define SMR 0x20 /* Sleep Mode Request */ +#define nSMR 0x0 +#define CSR 0x40 /* CAN Suspend Mode Request */ +#define nCSR 0x0 +#define CCR 0x80 /* CAN Configuration Mode Request */ +#define nCCR 0x0 + +/* Bit masks for CAN0_STATUS */ + +#define WT 0x1 /* CAN Transmit Warning Flag */ +#define nWT 0x0 +#define WR 0x2 /* CAN Receive Warning Flag */ +#define nWR 0x0 +#define EP 0x4 /* CAN Error Passive Mode */ +#define nEP 0x0 +#define EBO 0x8 /* CAN Error Bus Off Mode */ +#define nEBO 0x0 +#define CSA 0x40 /* CAN Suspend Mode Acknowledge */ +#define nCSA 0x0 +#define CCA 0x80 /* CAN Configuration Mode Acknowledge */ +#define nCCA 0x0 +#define MBPTR 0x1f00 /* Mailbox Pointer */ +#define TRM 0x4000 /* Transmit Mode Status */ +#define nTRM 0x0 +#define REC 0x8000 /* Receive Mode Status */ +#define nREC 0x0 + +/* Bit masks for CAN0_DEBUG */ + +#define DEC 0x1 /* Disable Transmit/Receive Error Counters */ +#define nDEC 0x0 +#define DRI 0x2 /* Disable CANRX Input Pin */ +#define nDRI 0x0 +#define DTO 0x4 /* Disable CANTX Output Pin */ +#define nDTO 0x0 +#define DIL 0x8 /* Disable Internal Loop */ +#define nDIL 0x0 +#define MAA 0x10 /* Mode Auto-Acknowledge */ +#define nMAA 0x0 +#define MRB 0x20 /* Mode Read Back */ +#define nMRB 0x0 +#define CDE 0x8000 /* CAN Debug Mode Enable */ +#define nCDE 0x0 + +/* Bit masks for CAN0_CLOCK */ + +#define BRP 0x3ff /* CAN Bit Rate Prescaler */ + +/* Bit masks for CAN0_TIMING */ + +#define SJW 0x300 /* Synchronization Jump Width */ +#define SAM 0x80 /* Sampling */ +#define nSAM 0x0 +#define TSEG2 0x70 /* Time Segment 2 */ +#define TSEG1 0xf /* Time Segment 1 */ + +/* Bit masks for CAN0_INTR */ + +#define CANRX 0x80 /* Serial Input From Transceiver */ +#define nCANRX 0x0 +#define CANTX 0x40 /* Serial Output To Transceiver */ +#define nCANTX 0x0 +#define SMACK 0x8 /* Sleep Mode Acknowledge */ +#define nSMACK 0x0 +#define GIRQ 0x4 /* Global Interrupt Request Status */ +#define nGIRQ 0x0 +#define MBTIRQ 0x2 /* Mailbox Transmit Interrupt Request */ +#define nMBTIRQ 0x0 +#define MBRIRQ 0x1 /* Mailbox Receive Interrupt Request */ +#define nMBRIRQ 0x0 + +/* Bit masks for CAN0_GIM */ + +#define EWTIM 0x1 /* Error Warning Transmit Interrupt Mask */ +#define nEWTIM 0x0 +#define EWRIM 0x2 /* Error Warning Receive Interrupt Mask */ +#define nEWRIM 0x0 +#define EPIM 0x4 /* Error Passive Interrupt Mask */ +#define nEPIM 0x0 +#define BOIM 0x8 /* Bus Off Interrupt Mask */ +#define nBOIM 0x0 +#define WUIM 0x10 /* Wakeup Interrupt Mask */ +#define nWUIM 0x0 +#define UIAIM 0x20 /* Unimplemented Address Interrupt Mask */ +#define nUIAIM 0x0 +#define AAIM 0x40 /* Abort Acknowledge Interrupt Mask */ +#define nAAIM 0x0 +#define RMLIM 0x80 /* Receive Message Lost Interrupt Mask */ +#define nRMLIM 0x0 +#define UCEIM 0x100 /* Universal Counter Exceeded Interrupt Mask */ +#define nUCEIM 0x0 +#define ADIM 0x400 /* Access Denied Interrupt Mask */ +#define nADIM 0x0 + +/* Bit masks for CAN0_GIS */ + +#define EWTIS 0x1 /* Error Warning Transmit Interrupt Status */ +#define nEWTIS 0x0 +#define EWRIS 0x2 /* Error Warning Receive Interrupt Status */ +#define nEWRIS 0x0 +#define EPIS 0x4 /* Error Passive Interrupt Status */ +#define nEPIS 0x0 +#define BOIS 0x8 /* Bus Off Interrupt Status */ +#define nBOIS 0x0 +#define WUIS 0x10 /* Wakeup Interrupt Status */ +#define nWUIS 0x0 +#define UIAIS 0x20 /* Unimplemented Address Interrupt Status */ +#define nUIAIS 0x0 +#define AAIS 0x40 /* Abort Acknowledge Interrupt Status */ +#define nAAIS 0x0 +#define RMLIS 0x80 /* Receive Message Lost Interrupt Status */ +#define nRMLIS 0x0 +#define UCEIS 0x100 /* Universal Counter Exceeded Interrupt Status */ +#define nUCEIS 0x0 +#define ADIS 0x400 /* Access Denied Interrupt Status */ +#define nADIS 0x0 + +/* Bit masks for CAN0_GIF */ + +#define EWTIF 0x1 /* Error Warning Transmit Interrupt Flag */ +#define nEWTIF 0x0 +#define EWRIF 0x2 /* Error Warning Receive Interrupt Flag */ +#define nEWRIF 0x0 +#define EPIF 0x4 /* Error Passive Interrupt Flag */ +#define nEPIF 0x0 +#define BOIF 0x8 /* Bus Off Interrupt Flag */ +#define nBOIF 0x0 +#define WUIF 0x10 /* Wakeup Interrupt Flag */ +#define nWUIF 0x0 +#define UIAIF 0x20 /* Unimplemented Address Interrupt Flag */ +#define nUIAIF 0x0 +#define AAIF 0x40 /* Abort Acknowledge Interrupt Flag */ +#define nAAIF 0x0 +#define RMLIF 0x80 /* Receive Message Lost Interrupt Flag */ +#define nRMLIF 0x0 +#define UCEIF 0x100 /* Universal Counter Exceeded Interrupt Flag */ +#define nUCEIF 0x0 +#define ADIF 0x400 /* Access Denied Interrupt Flag */ +#define nADIF 0x0 + +/* Bit masks for CAN0_MBTD */ + +#define TDR 0x80 /* Temporary Disable Request */ +#define nTDR 0x0 +#define TDA 0x40 /* Temporary Disable Acknowledge */ +#define nTDA 0x0 +#define TDPTR 0x1f /* Temporary Disable Pointer */ + +/* Bit masks for CAN0_UCCNF */ + +#define UCCNF 0xf /* Universal Counter Configuration */ +#define UCRC 0x20 /* Universal Counter Reload/Clear */ +#define nUCRC 0x0 +#define UCCT 0x40 /* Universal Counter CAN Trigger */ +#define nUCCT 0x0 +#define UCE 0x80 /* Universal Counter Enable */ +#define nUCE 0x0 + +/* Bit masks for CAN0_UCCNT */ + +#define UCCNT 0xffff /* Universal Counter Count Value */ + +/* Bit masks for CAN0_UCRC */ + +#define UCVAL 0xffff /* Universal Counter Reload/Capture Value */ + +/* Bit masks for CAN0_CEC */ + +#define RXECNT 0xff /* Receive Error Counter */ +#define TXECNT 0xff00 /* Transmit Error Counter */ + +/* Bit masks for CAN0_ESR */ + +#define FER 0x80 /* Form Error */ +#define nFER 0x0 +#define BEF 0x40 /* Bit Error Flag */ +#define nBEF 0x0 +#define SA0 0x20 /* Stuck At Dominant */ +#define nSA0 0x0 +#define CRCE 0x10 /* CRC Error */ +#define nCRCE 0x0 +#define SER 0x8 /* Stuff Bit Error */ +#define nSER 0x0 +#define ACKE 0x4 /* Acknowledge Error */ +#define nACKE 0x0 + +/* Bit masks for CAN0_EWR */ + +#define EWLTEC 0xff00 /* Transmit Error Warning Limit */ +#define EWLREC 0xff /* Receive Error Warning Limit */ + +/* Bit masks for CAN0_AMxx_H */ + +#define FDF 0x8000 /* Filter On Data Field */ +#define nFDF 0x0 +#define FMD 0x4000 /* Full Mask Data */ +#define nFMD 0x0 +#define AMIDE 0x2000 /* Acceptance Mask Identifier Extension */ +#define nAMIDE 0x0 +#define BASEID 0x1ffc /* Base Identifier */ +#define EXTID_HI 0x3 /* Extended Identifier High Bits */ + +/* Bit masks for CAN0_AMxx_L */ + +#define EXTID_LO 0xffff /* Extended Identifier Low Bits */ +#define DFM 0xffff /* Data Field Mask */ + +/* Bit masks for CAN0_MBxx_ID1 */ + +#define AME 0x8000 /* Acceptance Mask Enable */ +#define nAME 0x0 +#define RTR 0x4000 /* Remote Transmission Request */ +#define nRTR 0x0 +#define IDE 0x2000 /* Identifier Extension */ +#define nIDE 0x0 +#define BASEID 0x1ffc /* Base Identifier */ +#define EXTID_HI 0x3 /* Extended Identifier High Bits */ + +/* Bit masks for CAN0_MBxx_ID0 */ + +#define EXTID_LO 0xffff /* Extended Identifier Low Bits */ +#define DFM 0xffff /* Data Field Mask */ + +/* Bit masks for CAN0_MBxx_TIMESTAMP */ + +#define TSV 0xffff /* Time Stamp Value */ + +/* Bit masks for CAN0_MBxx_LENGTH */ + +#define DLC 0xf /* Data Length Code */ + +/* Bit masks for CAN0_MBxx_DATA3 */ + +#define CAN_BYTE0 0xff00 /* Data Field Byte 0 */ +#define CAN_BYTE1 0xff /* Data Field Byte 1 */ + +/* Bit masks for CAN0_MBxx_DATA2 */ + +#define CAN_BYTE2 0xff00 /* Data Field Byte 2 */ +#define CAN_BYTE3 0xff /* Data Field Byte 3 */ + +/* Bit masks for CAN0_MBxx_DATA1 */ + +#define CAN_BYTE4 0xff00 /* Data Field Byte 4 */ +#define CAN_BYTE5 0xff /* Data Field Byte 5 */ + +/* Bit masks for CAN0_MBxx_DATA0 */ + +#define CAN_BYTE6 0xff00 /* Data Field Byte 6 */ +#define CAN_BYTE7 0xff /* Data Field Byte 7 */ + +/* Bit masks for CAN0_MC1 */ + +#define MC0 0x1 /* Mailbox 0 Enable */ +#define nMC0 0x0 +#define MC1 0x2 /* Mailbox 1 Enable */ +#define nMC1 0x0 +#define MC2 0x4 /* Mailbox 2 Enable */ +#define nMC2 0x0 +#define MC3 0x8 /* Mailbox 3 Enable */ +#define nMC3 0x0 +#define MC4 0x10 /* Mailbox 4 Enable */ +#define nMC4 0x0 +#define MC5 0x20 /* Mailbox 5 Enable */ +#define nMC5 0x0 +#define MC6 0x40 /* Mailbox 6 Enable */ +#define nMC6 0x0 +#define MC7 0x80 /* Mailbox 7 Enable */ +#define nMC7 0x0 +#define MC8 0x100 /* Mailbox 8 Enable */ +#define nMC8 0x0 +#define MC9 0x200 /* Mailbox 9 Enable */ +#define nMC9 0x0 +#define MC10 0x400 /* Mailbox 10 Enable */ +#define nMC10 0x0 +#define MC11 0x800 /* Mailbox 11 Enable */ +#define nMC11 0x0 +#define MC12 0x1000 /* Mailbox 12 Enable */ +#define nMC12 0x0 +#define MC13 0x2000 /* Mailbox 13 Enable */ +#define nMC13 0x0 +#define MC14 0x4000 /* Mailbox 14 Enable */ +#define nMC14 0x0 +#define MC15 0x8000 /* Mailbox 15 Enable */ +#define nMC15 0x0 + +/* Bit masks for CAN0_MC2 */ + +#define MC16 0x1 /* Mailbox 16 Enable */ +#define nMC16 0x0 +#define MC17 0x2 /* Mailbox 17 Enable */ +#define nMC17 0x0 +#define MC18 0x4 /* Mailbox 18 Enable */ +#define nMC18 0x0 +#define MC19 0x8 /* Mailbox 19 Enable */ +#define nMC19 0x0 +#define MC20 0x10 /* Mailbox 20 Enable */ +#define nMC20 0x0 +#define MC21 0x20 /* Mailbox 21 Enable */ +#define nMC21 0x0 +#define MC22 0x40 /* Mailbox 22 Enable */ +#define nMC22 0x0 +#define MC23 0x80 /* Mailbox 23 Enable */ +#define nMC23 0x0 +#define MC24 0x100 /* Mailbox 24 Enable */ +#define nMC24 0x0 +#define MC25 0x200 /* Mailbox 25 Enable */ +#define nMC25 0x0 +#define MC26 0x400 /* Mailbox 26 Enable */ +#define nMC26 0x0 +#define MC27 0x800 /* Mailbox 27 Enable */ +#define nMC27 0x0 +#define MC28 0x1000 /* Mailbox 28 Enable */ +#define nMC28 0x0 +#define MC29 0x2000 /* Mailbox 29 Enable */ +#define nMC29 0x0 +#define MC30 0x4000 /* Mailbox 30 Enable */ +#define nMC30 0x0 +#define MC31 0x8000 /* Mailbox 31 Enable */ +#define nMC31 0x0 + +/* Bit masks for CAN0_MD1 */ + +#define MD0 0x1 /* Mailbox 0 Receive Enable */ +#define nMD0 0x0 +#define MD1 0x2 /* Mailbox 1 Receive Enable */ +#define nMD1 0x0 +#define MD2 0x4 /* Mailbox 2 Receive Enable */ +#define nMD2 0x0 +#define MD3 0x8 /* Mailbox 3 Receive Enable */ +#define nMD3 0x0 +#define MD4 0x10 /* Mailbox 4 Receive Enable */ +#define nMD4 0x0 +#define MD5 0x20 /* Mailbox 5 Receive Enable */ +#define nMD5 0x0 +#define MD6 0x40 /* Mailbox 6 Receive Enable */ +#define nMD6 0x0 +#define MD7 0x80 /* Mailbox 7 Receive Enable */ +#define nMD7 0x0 +#define MD8 0x100 /* Mailbox 8 Receive Enable */ +#define nMD8 0x0 +#define MD9 0x200 /* Mailbox 9 Receive Enable */ +#define nMD9 0x0 +#define MD10 0x400 /* Mailbox 10 Receive Enable */ +#define nMD10 0x0 +#define MD11 0x800 /* Mailbox 11 Receive Enable */ +#define nMD11 0x0 +#define MD12 0x1000 /* Mailbox 12 Receive Enable */ +#define nMD12 0x0 +#define MD13 0x2000 /* Mailbox 13 Receive Enable */ +#define nMD13 0x0 +#define MD14 0x4000 /* Mailbox 14 Receive Enable */ +#define nMD14 0x0 +#define MD15 0x8000 /* Mailbox 15 Receive Enable */ +#define nMD15 0x0 + +/* Bit masks for CAN0_MD2 */ + +#define MD16 0x1 /* Mailbox 16 Receive Enable */ +#define nMD16 0x0 +#define MD17 0x2 /* Mailbox 17 Receive Enable */ +#define nMD17 0x0 +#define MD18 0x4 /* Mailbox 18 Receive Enable */ +#define nMD18 0x0 +#define MD19 0x8 /* Mailbox 19 Receive Enable */ +#define nMD19 0x0 +#define MD20 0x10 /* Mailbox 20 Receive Enable */ +#define nMD20 0x0 +#define MD21 0x20 /* Mailbox 21 Receive Enable */ +#define nMD21 0x0 +#define MD22 0x40 /* Mailbox 22 Receive Enable */ +#define nMD22 0x0 +#define MD23 0x80 /* Mailbox 23 Receive Enable */ +#define nMD23 0x0 +#define MD24 0x100 /* Mailbox 24 Receive Enable */ +#define nMD24 0x0 +#define MD25 0x200 /* Mailbox 25 Receive Enable */ +#define nMD25 0x0 +#define MD26 0x400 /* Mailbox 26 Receive Enable */ +#define nMD26 0x0 +#define MD27 0x800 /* Mailbox 27 Receive Enable */ +#define nMD27 0x0 +#define MD28 0x1000 /* Mailbox 28 Receive Enable */ +#define nMD28 0x0 +#define MD29 0x2000 /* Mailbox 29 Receive Enable */ +#define nMD29 0x0 +#define MD30 0x4000 /* Mailbox 30 Receive Enable */ +#define nMD30 0x0 +#define MD31 0x8000 /* Mailbox 31 Receive Enable */ +#define nMD31 0x0 + +/* Bit masks for CAN0_RMP1 */ + +#define RMP0 0x1 /* Mailbox 0 Receive Message Pending */ +#define nRMP0 0x0 +#define RMP1 0x2 /* Mailbox 1 Receive Message Pending */ +#define nRMP1 0x0 +#define RMP2 0x4 /* Mailbox 2 Receive Message Pending */ +#define nRMP2 0x0 +#define RMP3 0x8 /* Mailbox 3 Receive Message Pending */ +#define nRMP3 0x0 +#define RMP4 0x10 /* Mailbox 4 Receive Message Pending */ +#define nRMP4 0x0 +#define RMP5 0x20 /* Mailbox 5 Receive Message Pending */ +#define nRMP5 0x0 +#define RMP6 0x40 /* Mailbox 6 Receive Message Pending */ +#define nRMP6 0x0 +#define RMP7 0x80 /* Mailbox 7 Receive Message Pending */ +#define nRMP7 0x0 +#define RMP8 0x100 /* Mailbox 8 Receive Message Pending */ +#define nRMP8 0x0 +#define RMP9 0x200 /* Mailbox 9 Receive Message Pending */ +#define nRMP9 0x0 +#define RMP10 0x400 /* Mailbox 10 Receive Message Pending */ +#define nRMP10 0x0 +#define RMP11 0x800 /* Mailbox 11 Receive Message Pending */ +#define nRMP11 0x0 +#define RMP12 0x1000 /* Mailbox 12 Receive Message Pending */ +#define nRMP12 0x0 +#define RMP13 0x2000 /* Mailbox 13 Receive Message Pending */ +#define nRMP13 0x0 +#define RMP14 0x4000 /* Mailbox 14 Receive Message Pending */ +#define nRMP14 0x0 +#define RMP15 0x8000 /* Mailbox 15 Receive Message Pending */ +#define nRMP15 0x0 + +/* Bit masks for CAN0_RMP2 */ + +#define RMP16 0x1 /* Mailbox 16 Receive Message Pending */ +#define nRMP16 0x0 +#define RMP17 0x2 /* Mailbox 17 Receive Message Pending */ +#define nRMP17 0x0 +#define RMP18 0x4 /* Mailbox 18 Receive Message Pending */ +#define nRMP18 0x0 +#define RMP19 0x8 /* Mailbox 19 Receive Message Pending */ +#define nRMP19 0x0 +#define RMP20 0x10 /* Mailbox 20 Receive Message Pending */ +#define nRMP20 0x0 +#define RMP21 0x20 /* Mailbox 21 Receive Message Pending */ +#define nRMP21 0x0 +#define RMP22 0x40 /* Mailbox 22 Receive Message Pending */ +#define nRMP22 0x0 +#define RMP23 0x80 /* Mailbox 23 Receive Message Pending */ +#define nRMP23 0x0 +#define RMP24 0x100 /* Mailbox 24 Receive Message Pending */ +#define nRMP24 0x0 +#define RMP25 0x200 /* Mailbox 25 Receive Message Pending */ +#define nRMP25 0x0 +#define RMP26 0x400 /* Mailbox 26 Receive Message Pending */ +#define nRMP26 0x0 +#define RMP27 0x800 /* Mailbox 27 Receive Message Pending */ +#define nRMP27 0x0 +#define RMP28 0x1000 /* Mailbox 28 Receive Message Pending */ +#define nRMP28 0x0 +#define RMP29 0x2000 /* Mailbox 29 Receive Message Pending */ +#define nRMP29 0x0 +#define RMP30 0x4000 /* Mailbox 30 Receive Message Pending */ +#define nRMP30 0x0 +#define RMP31 0x8000 /* Mailbox 31 Receive Message Pending */ +#define nRMP31 0x0 + +/* Bit masks for CAN0_RML1 */ + +#define RML0 0x1 /* Mailbox 0 Receive Message Lost */ +#define nRML0 0x0 +#define RML1 0x2 /* Mailbox 1 Receive Message Lost */ +#define nRML1 0x0 +#define RML2 0x4 /* Mailbox 2 Receive Message Lost */ +#define nRML2 0x0 +#define RML3 0x8 /* Mailbox 3 Receive Message Lost */ +#define nRML3 0x0 +#define RML4 0x10 /* Mailbox 4 Receive Message Lost */ +#define nRML4 0x0 +#define RML5 0x20 /* Mailbox 5 Receive Message Lost */ +#define nRML5 0x0 +#define RML6 0x40 /* Mailbox 6 Receive Message Lost */ +#define nRML6 0x0 +#define RML7 0x80 /* Mailbox 7 Receive Message Lost */ +#define nRML7 0x0 +#define RML8 0x100 /* Mailbox 8 Receive Message Lost */ +#define nRML8 0x0 +#define RML9 0x200 /* Mailbox 9 Receive Message Lost */ +#define nRML9 0x0 +#define RML10 0x400 /* Mailbox 10 Receive Message Lost */ +#define nRML10 0x0 +#define RML11 0x800 /* Mailbox 11 Receive Message Lost */ +#define nRML11 0x0 +#define RML12 0x1000 /* Mailbox 12 Receive Message Lost */ +#define nRML12 0x0 +#define RML13 0x2000 /* Mailbox 13 Receive Message Lost */ +#define nRML13 0x0 +#define RML14 0x4000 /* Mailbox 14 Receive Message Lost */ +#define nRML14 0x0 +#define RML15 0x8000 /* Mailbox 15 Receive Message Lost */ +#define nRML15 0x0 + +/* Bit masks for CAN0_RML2 */ + +#define RML16 0x1 /* Mailbox 16 Receive Message Lost */ +#define nRML16 0x0 +#define RML17 0x2 /* Mailbox 17 Receive Message Lost */ +#define nRML17 0x0 +#define RML18 0x4 /* Mailbox 18 Receive Message Lost */ +#define nRML18 0x0 +#define RML19 0x8 /* Mailbox 19 Receive Message Lost */ +#define nRML19 0x0 +#define RML20 0x10 /* Mailbox 20 Receive Message Lost */ +#define nRML20 0x0 +#define RML21 0x20 /* Mailbox 21 Receive Message Lost */ +#define nRML21 0x0 +#define RML22 0x40 /* Mailbox 22 Receive Message Lost */ +#define nRML22 0x0 +#define RML23 0x80 /* Mailbox 23 Receive Message Lost */ +#define nRML23 0x0 +#define RML24 0x100 /* Mailbox 24 Receive Message Lost */ +#define nRML24 0x0 +#define RML25 0x200 /* Mailbox 25 Receive Message Lost */ +#define nRML25 0x0 +#define RML26 0x400 /* Mailbox 26 Receive Message Lost */ +#define nRML26 0x0 +#define RML27 0x800 /* Mailbox 27 Receive Message Lost */ +#define nRML27 0x0 +#define RML28 0x1000 /* Mailbox 28 Receive Message Lost */ +#define nRML28 0x0 +#define RML29 0x2000 /* Mailbox 29 Receive Message Lost */ +#define nRML29 0x0 +#define RML30 0x4000 /* Mailbox 30 Receive Message Lost */ +#define nRML30 0x0 +#define RML31 0x8000 /* Mailbox 31 Receive Message Lost */ +#define nRML31 0x0 + +/* Bit masks for CAN0_OPSS1 */ + +#define OPSS0 0x1 /* Mailbox 0 Overwrite Protection/Single-Shot Transmission Enable */ +#define nOPSS0 0x0 +#define OPSS1 0x2 /* Mailbox 1 Overwrite Protection/Single-Shot Transmission Enable */ +#define nOPSS1 0x0 +#define OPSS2 0x4 /* Mailbox 2 Overwrite Protection/Single-Shot Transmission Enable */ +#define nOPSS2 0x0 +#define OPSS3 0x8 /* Mailbox 3 Overwrite Protection/Single-Shot Transmission Enable */ +#define nOPSS3 0x0 +#define OPSS4 0x10 /* Mailbox 4 Overwrite Protection/Single-Shot Transmission Enable */ +#define nOPSS4 0x0 +#define OPSS5 0x20 /* Mailbox 5 Overwrite Protection/Single-Shot Transmission Enable */ +#define nOPSS5 0x0 +#define OPSS6 0x40 /* Mailbox 6 Overwrite Protection/Single-Shot Transmission Enable */ +#define nOPSS6 0x0 +#define OPSS7 0x80 /* Mailbox 7 Overwrite Protection/Single-Shot Transmission Enable */ +#define nOPSS7 0x0 +#define OPSS8 0x100 /* Mailbox 8 Overwrite Protection/Single-Shot Transmission Enable */ +#define nOPSS8 0x0 +#define OPSS9 0x200 /* Mailbox 9 Overwrite Protection/Single-Shot Transmission Enable */ +#define nOPSS9 0x0 +#define OPSS10 0x400 /* Mailbox 10 Overwrite Protection/Single-Shot Transmission Enable */ +#define nOPSS10 0x0 +#define OPSS11 0x800 /* Mailbox 11 Overwrite Protection/Single-Shot Transmission Enable */ +#define nOPSS11 0x0 +#define OPSS12 0x1000 /* Mailbox 12 Overwrite Protection/Single-Shot Transmission Enable */ +#define nOPSS12 0x0 +#define OPSS13 0x2000 /* Mailbox 13 Overwrite Protection/Single-Shot Transmission Enable */ +#define nOPSS13 0x0 +#define OPSS14 0x4000 /* Mailbox 14 Overwrite Protection/Single-Shot Transmission Enable */ +#define nOPSS14 0x0 +#define OPSS15 0x8000 /* Mailbox 15 Overwrite Protection/Single-Shot Transmission Enable */ +#define nOPSS15 0x0 + +/* Bit masks for CAN0_OPSS2 */ + +#define OPSS16 0x1 /* Mailbox 16 Overwrite Protection/Single-Shot Transmission Enable */ +#define nOPSS16 0x0 +#define OPSS17 0x2 /* Mailbox 17 Overwrite Protection/Single-Shot Transmission Enable */ +#define nOPSS17 0x0 +#define OPSS18 0x4 /* Mailbox 18 Overwrite Protection/Single-Shot Transmission Enable */ +#define nOPSS18 0x0 +#define OPSS19 0x8 /* Mailbox 19 Overwrite Protection/Single-Shot Transmission Enable */ +#define nOPSS19 0x0 +#define OPSS20 0x10 /* Mailbox 20 Overwrite Protection/Single-Shot Transmission Enable */ +#define nOPSS20 0x0 +#define OPSS21 0x20 /* Mailbox 21 Overwrite Protection/Single-Shot Transmission Enable */ +#define nOPSS21 0x0 +#define OPSS22 0x40 /* Mailbox 22 Overwrite Protection/Single-Shot Transmission Enable */ +#define nOPSS22 0x0 +#define OPSS23 0x80 /* Mailbox 23 Overwrite Protection/Single-Shot Transmission Enable */ +#define nOPSS23 0x0 +#define OPSS24 0x100 /* Mailbox 24 Overwrite Protection/Single-Shot Transmission Enable */ +#define nOPSS24 0x0 +#define OPSS25 0x200 /* Mailbox 25 Overwrite Protection/Single-Shot Transmission Enable */ +#define nOPSS25 0x0 +#define OPSS26 0x400 /* Mailbox 26 Overwrite Protection/Single-Shot Transmission Enable */ +#define nOPSS26 0x0 +#define OPSS27 0x800 /* Mailbox 27 Overwrite Protection/Single-Shot Transmission Enable */ +#define nOPSS27 0x0 +#define OPSS28 0x1000 /* Mailbox 28 Overwrite Protection/Single-Shot Transmission Enable */ +#define nOPSS28 0x0 +#define OPSS29 0x2000 /* Mailbox 29 Overwrite Protection/Single-Shot Transmission Enable */ +#define nOPSS29 0x0 +#define OPSS30 0x4000 /* Mailbox 30 Overwrite Protection/Single-Shot Transmission Enable */ +#define nOPSS30 0x0 +#define OPSS31 0x8000 /* Mailbox 31 Overwrite Protection/Single-Shot Transmission Enable */ +#define nOPSS31 0x0 + +/* Bit masks for CAN0_TRS1 */ + +#define TRS0 0x1 /* Mailbox 0 Transmit Request Set */ +#define nTRS0 0x0 +#define TRS1 0x2 /* Mailbox 1 Transmit Request Set */ +#define nTRS1 0x0 +#define TRS2 0x4 /* Mailbox 2 Transmit Request Set */ +#define nTRS2 0x0 +#define TRS3 0x8 /* Mailbox 3 Transmit Request Set */ +#define nTRS3 0x0 +#define TRS4 0x10 /* Mailbox 4 Transmit Request Set */ +#define nTRS4 0x0 +#define TRS5 0x20 /* Mailbox 5 Transmit Request Set */ +#define nTRS5 0x0 +#define TRS6 0x40 /* Mailbox 6 Transmit Request Set */ +#define nTRS6 0x0 +#define TRS7 0x80 /* Mailbox 7 Transmit Request Set */ +#define nTRS7 0x0 +#define TRS8 0x100 /* Mailbox 8 Transmit Request Set */ +#define nTRS8 0x0 +#define TRS9 0x200 /* Mailbox 9 Transmit Request Set */ +#define nTRS9 0x0 +#define TRS10 0x400 /* Mailbox 10 Transmit Request Set */ +#define nTRS10 0x0 +#define TRS11 0x800 /* Mailbox 11 Transmit Request Set */ +#define nTRS11 0x0 +#define TRS12 0x1000 /* Mailbox 12 Transmit Request Set */ +#define nTRS12 0x0 +#define TRS13 0x2000 /* Mailbox 13 Transmit Request Set */ +#define nTRS13 0x0 +#define TRS14 0x4000 /* Mailbox 14 Transmit Request Set */ +#define nTRS14 0x0 +#define TRS15 0x8000 /* Mailbox 15 Transmit Request Set */ +#define nTRS15 0x0 + +/* Bit masks for CAN0_TRS2 */ + +#define TRS16 0x1 /* Mailbox 16 Transmit Request Set */ +#define nTRS16 0x0 +#define TRS17 0x2 /* Mailbox 17 Transmit Request Set */ +#define nTRS17 0x0 +#define TRS18 0x4 /* Mailbox 18 Transmit Request Set */ +#define nTRS18 0x0 +#define TRS19 0x8 /* Mailbox 19 Transmit Request Set */ +#define nTRS19 0x0 +#define TRS20 0x10 /* Mailbox 20 Transmit Request Set */ +#define nTRS20 0x0 +#define TRS21 0x20 /* Mailbox 21 Transmit Request Set */ +#define nTRS21 0x0 +#define TRS22 0x40 /* Mailbox 22 Transmit Request Set */ +#define nTRS22 0x0 +#define TRS23 0x80 /* Mailbox 23 Transmit Request Set */ +#define nTRS23 0x0 +#define TRS24 0x100 /* Mailbox 24 Transmit Request Set */ +#define nTRS24 0x0 +#define TRS25 0x200 /* Mailbox 25 Transmit Request Set */ +#define nTRS25 0x0 +#define TRS26 0x400 /* Mailbox 26 Transmit Request Set */ +#define nTRS26 0x0 +#define TRS27 0x800 /* Mailbox 27 Transmit Request Set */ +#define nTRS27 0x0 +#define TRS28 0x1000 /* Mailbox 28 Transmit Request Set */ +#define nTRS28 0x0 +#define TRS29 0x2000 /* Mailbox 29 Transmit Request Set */ +#define nTRS29 0x0 +#define TRS30 0x4000 /* Mailbox 30 Transmit Request Set */ +#define nTRS30 0x0 +#define TRS31 0x8000 /* Mailbox 31 Transmit Request Set */ +#define nTRS31 0x0 + +/* Bit masks for CAN0_TRR1 */ + +#define TRR0 0x1 /* Mailbox 0 Transmit Request Reset */ +#define nTRR0 0x0 +#define TRR1 0x2 /* Mailbox 1 Transmit Request Reset */ +#define nTRR1 0x0 +#define TRR2 0x4 /* Mailbox 2 Transmit Request Reset */ +#define nTRR2 0x0 +#define TRR3 0x8 /* Mailbox 3 Transmit Request Reset */ +#define nTRR3 0x0 +#define TRR4 0x10 /* Mailbox 4 Transmit Request Reset */ +#define nTRR4 0x0 +#define TRR5 0x20 /* Mailbox 5 Transmit Request Reset */ +#define nTRR5 0x0 +#define TRR6 0x40 /* Mailbox 6 Transmit Request Reset */ +#define nTRR6 0x0 +#define TRR7 0x80 /* Mailbox 7 Transmit Request Reset */ +#define nTRR7 0x0 +#define TRR8 0x100 /* Mailbox 8 Transmit Request Reset */ +#define nTRR8 0x0 +#define TRR9 0x200 /* Mailbox 9 Transmit Request Reset */ +#define nTRR9 0x0 +#define TRR10 0x400 /* Mailbox 10 Transmit Request Reset */ +#define nTRR10 0x0 +#define TRR11 0x800 /* Mailbox 11 Transmit Request Reset */ +#define nTRR11 0x0 +#define TRR12 0x1000 /* Mailbox 12 Transmit Request Reset */ +#define nTRR12 0x0 +#define TRR13 0x2000 /* Mailbox 13 Transmit Request Reset */ +#define nTRR13 0x0 +#define TRR14 0x4000 /* Mailbox 14 Transmit Request Reset */ +#define nTRR14 0x0 +#define TRR15 0x8000 /* Mailbox 15 Transmit Request Reset */ +#define nTRR15 0x0 + +/* Bit masks for CAN0_TRR2 */ + +#define TRR16 0x1 /* Mailbox 16 Transmit Request Reset */ +#define nTRR16 0x0 +#define TRR17 0x2 /* Mailbox 17 Transmit Request Reset */ +#define nTRR17 0x0 +#define TRR18 0x4 /* Mailbox 18 Transmit Request Reset */ +#define nTRR18 0x0 +#define TRR19 0x8 /* Mailbox 19 Transmit Request Reset */ +#define nTRR19 0x0 +#define TRR20 0x10 /* Mailbox 20 Transmit Request Reset */ +#define nTRR20 0x0 +#define TRR21 0x20 /* Mailbox 21 Transmit Request Reset */ +#define nTRR21 0x0 +#define TRR22 0x40 /* Mailbox 22 Transmit Request Reset */ +#define nTRR22 0x0 +#define TRR23 0x80 /* Mailbox 23 Transmit Request Reset */ +#define nTRR23 0x0 +#define TRR24 0x100 /* Mailbox 24 Transmit Request Reset */ +#define nTRR24 0x0 +#define TRR25 0x200 /* Mailbox 25 Transmit Request Reset */ +#define nTRR25 0x0 +#define TRR26 0x400 /* Mailbox 26 Transmit Request Reset */ +#define nTRR26 0x0 +#define TRR27 0x800 /* Mailbox 27 Transmit Request Reset */ +#define nTRR27 0x0 +#define TRR28 0x1000 /* Mailbox 28 Transmit Request Reset */ +#define nTRR28 0x0 +#define TRR29 0x2000 /* Mailbox 29 Transmit Request Reset */ +#define nTRR29 0x0 +#define TRR30 0x4000 /* Mailbox 30 Transmit Request Reset */ +#define nTRR30 0x0 +#define TRR31 0x8000 /* Mailbox 31 Transmit Request Reset */ +#define nTRR31 0x0 + +/* Bit masks for CAN0_AA1 */ + +#define AA0 0x1 /* Mailbox 0 Abort Acknowledge */ +#define nAA0 0x0 +#define AA1 0x2 /* Mailbox 1 Abort Acknowledge */ +#define nAA1 0x0 +#define AA2 0x4 /* Mailbox 2 Abort Acknowledge */ +#define nAA2 0x0 +#define AA3 0x8 /* Mailbox 3 Abort Acknowledge */ +#define nAA3 0x0 +#define AA4 0x10 /* Mailbox 4 Abort Acknowledge */ +#define nAA4 0x0 +#define AA5 0x20 /* Mailbox 5 Abort Acknowledge */ +#define nAA5 0x0 +#define AA6 0x40 /* Mailbox 6 Abort Acknowledge */ +#define nAA6 0x0 +#define AA7 0x80 /* Mailbox 7 Abort Acknowledge */ +#define nAA7 0x0 +#define AA8 0x100 /* Mailbox 8 Abort Acknowledge */ +#define nAA8 0x0 +#define AA9 0x200 /* Mailbox 9 Abort Acknowledge */ +#define nAA9 0x0 +#define AA10 0x400 /* Mailbox 10 Abort Acknowledge */ +#define nAA10 0x0 +#define AA11 0x800 /* Mailbox 11 Abort Acknowledge */ +#define nAA11 0x0 +#define AA12 0x1000 /* Mailbox 12 Abort Acknowledge */ +#define nAA12 0x0 +#define AA13 0x2000 /* Mailbox 13 Abort Acknowledge */ +#define nAA13 0x0 +#define AA14 0x4000 /* Mailbox 14 Abort Acknowledge */ +#define nAA14 0x0 +#define AA15 0x8000 /* Mailbox 15 Abort Acknowledge */ +#define nAA15 0x0 + +/* Bit masks for CAN0_AA2 */ + +#define AA16 0x1 /* Mailbox 16 Abort Acknowledge */ +#define nAA16 0x0 +#define AA17 0x2 /* Mailbox 17 Abort Acknowledge */ +#define nAA17 0x0 +#define AA18 0x4 /* Mailbox 18 Abort Acknowledge */ +#define nAA18 0x0 +#define AA19 0x8 /* Mailbox 19 Abort Acknowledge */ +#define nAA19 0x0 +#define AA20 0x10 /* Mailbox 20 Abort Acknowledge */ +#define nAA20 0x0 +#define AA21 0x20 /* Mailbox 21 Abort Acknowledge */ +#define nAA21 0x0 +#define AA22 0x40 /* Mailbox 22 Abort Acknowledge */ +#define nAA22 0x0 +#define AA23 0x80 /* Mailbox 23 Abort Acknowledge */ +#define nAA23 0x0 +#define AA24 0x100 /* Mailbox 24 Abort Acknowledge */ +#define nAA24 0x0 +#define AA25 0x200 /* Mailbox 25 Abort Acknowledge */ +#define nAA25 0x0 +#define AA26 0x400 /* Mailbox 26 Abort Acknowledge */ +#define nAA26 0x0 +#define AA27 0x800 /* Mailbox 27 Abort Acknowledge */ +#define nAA27 0x0 +#define AA28 0x1000 /* Mailbox 28 Abort Acknowledge */ +#define nAA28 0x0 +#define AA29 0x2000 /* Mailbox 29 Abort Acknowledge */ +#define nAA29 0x0 +#define AA30 0x4000 /* Mailbox 30 Abort Acknowledge */ +#define nAA30 0x0 +#define AA31 0x8000 /* Mailbox 31 Abort Acknowledge */ +#define nAA31 0x0 + +/* Bit masks for CAN0_TA1 */ + +#define TA0 0x1 /* Mailbox 0 Transmit Acknowledge */ +#define nTA0 0x0 +#define TA1 0x2 /* Mailbox 1 Transmit Acknowledge */ +#define nTA1 0x0 +#define TA2 0x4 /* Mailbox 2 Transmit Acknowledge */ +#define nTA2 0x0 +#define TA3 0x8 /* Mailbox 3 Transmit Acknowledge */ +#define nTA3 0x0 +#define TA4 0x10 /* Mailbox 4 Transmit Acknowledge */ +#define nTA4 0x0 +#define TA5 0x20 /* Mailbox 5 Transmit Acknowledge */ +#define nTA5 0x0 +#define TA6 0x40 /* Mailbox 6 Transmit Acknowledge */ +#define nTA6 0x0 +#define TA7 0x80 /* Mailbox 7 Transmit Acknowledge */ +#define nTA7 0x0 +#define TA8 0x100 /* Mailbox 8 Transmit Acknowledge */ +#define nTA8 0x0 +#define TA9 0x200 /* Mailbox 9 Transmit Acknowledge */ +#define nTA9 0x0 +#define TA10 0x400 /* Mailbox 10 Transmit Acknowledge */ +#define nTA10 0x0 +#define TA11 0x800 /* Mailbox 11 Transmit Acknowledge */ +#define nTA11 0x0 +#define TA12 0x1000 /* Mailbox 12 Transmit Acknowledge */ +#define nTA12 0x0 +#define TA13 0x2000 /* Mailbox 13 Transmit Acknowledge */ +#define nTA13 0x0 +#define TA14 0x4000 /* Mailbox 14 Transmit Acknowledge */ +#define nTA14 0x0 +#define TA15 0x8000 /* Mailbox 15 Transmit Acknowledge */ +#define nTA15 0x0 + +/* Bit masks for CAN0_TA2 */ + +#define TA16 0x1 /* Mailbox 16 Transmit Acknowledge */ +#define nTA16 0x0 +#define TA17 0x2 /* Mailbox 17 Transmit Acknowledge */ +#define nTA17 0x0 +#define TA18 0x4 /* Mailbox 18 Transmit Acknowledge */ +#define nTA18 0x0 +#define TA19 0x8 /* Mailbox 19 Transmit Acknowledge */ +#define nTA19 0x0 +#define TA20 0x10 /* Mailbox 20 Transmit Acknowledge */ +#define nTA20 0x0 +#define TA21 0x20 /* Mailbox 21 Transmit Acknowledge */ +#define nTA21 0x0 +#define TA22 0x40 /* Mailbox 22 Transmit Acknowledge */ +#define nTA22 0x0 +#define TA23 0x80 /* Mailbox 23 Transmit Acknowledge */ +#define nTA23 0x0 +#define TA24 0x100 /* Mailbox 24 Transmit Acknowledge */ +#define nTA24 0x0 +#define TA25 0x200 /* Mailbox 25 Transmit Acknowledge */ +#define nTA25 0x0 +#define TA26 0x400 /* Mailbox 26 Transmit Acknowledge */ +#define nTA26 0x0 +#define TA27 0x800 /* Mailbox 27 Transmit Acknowledge */ +#define nTA27 0x0 +#define TA28 0x1000 /* Mailbox 28 Transmit Acknowledge */ +#define nTA28 0x0 +#define TA29 0x2000 /* Mailbox 29 Transmit Acknowledge */ +#define nTA29 0x0 +#define TA30 0x4000 /* Mailbox 30 Transmit Acknowledge */ +#define nTA30 0x0 +#define TA31 0x8000 /* Mailbox 31 Transmit Acknowledge */ +#define nTA31 0x0 + +/* Bit masks for CAN0_RFH1 */ + +#define RFH0 0x1 /* Mailbox 0 Remote Frame Handling Enable */ +#define nRFH0 0x0 +#define RFH1 0x2 /* Mailbox 1 Remote Frame Handling Enable */ +#define nRFH1 0x0 +#define RFH2 0x4 /* Mailbox 2 Remote Frame Handling Enable */ +#define nRFH2 0x0 +#define RFH3 0x8 /* Mailbox 3 Remote Frame Handling Enable */ +#define nRFH3 0x0 +#define RFH4 0x10 /* Mailbox 4 Remote Frame Handling Enable */ +#define nRFH4 0x0 +#define RFH5 0x20 /* Mailbox 5 Remote Frame Handling Enable */ +#define nRFH5 0x0 +#define RFH6 0x40 /* Mailbox 6 Remote Frame Handling Enable */ +#define nRFH6 0x0 +#define RFH7 0x80 /* Mailbox 7 Remote Frame Handling Enable */ +#define nRFH7 0x0 +#define RFH8 0x100 /* Mailbox 8 Remote Frame Handling Enable */ +#define nRFH8 0x0 +#define RFH9 0x200 /* Mailbox 9 Remote Frame Handling Enable */ +#define nRFH9 0x0 +#define RFH10 0x400 /* Mailbox 10 Remote Frame Handling Enable */ +#define nRFH10 0x0 +#define RFH11 0x800 /* Mailbox 11 Remote Frame Handling Enable */ +#define nRFH11 0x0 +#define RFH12 0x1000 /* Mailbox 12 Remote Frame Handling Enable */ +#define nRFH12 0x0 +#define RFH13 0x2000 /* Mailbox 13 Remote Frame Handling Enable */ +#define nRFH13 0x0 +#define RFH14 0x4000 /* Mailbox 14 Remote Frame Handling Enable */ +#define nRFH14 0x0 +#define RFH15 0x8000 /* Mailbox 15 Remote Frame Handling Enable */ +#define nRFH15 0x0 + +/* Bit masks for CAN0_RFH2 */ + +#define RFH16 0x1 /* Mailbox 16 Remote Frame Handling Enable */ +#define nRFH16 0x0 +#define RFH17 0x2 /* Mailbox 17 Remote Frame Handling Enable */ +#define nRFH17 0x0 +#define RFH18 0x4 /* Mailbox 18 Remote Frame Handling Enable */ +#define nRFH18 0x0 +#define RFH19 0x8 /* Mailbox 19 Remote Frame Handling Enable */ +#define nRFH19 0x0 +#define RFH20 0x10 /* Mailbox 20 Remote Frame Handling Enable */ +#define nRFH20 0x0 +#define RFH21 0x20 /* Mailbox 21 Remote Frame Handling Enable */ +#define nRFH21 0x0 +#define RFH22 0x40 /* Mailbox 22 Remote Frame Handling Enable */ +#define nRFH22 0x0 +#define RFH23 0x80 /* Mailbox 23 Remote Frame Handling Enable */ +#define nRFH23 0x0 +#define RFH24 0x100 /* Mailbox 24 Remote Frame Handling Enable */ +#define nRFH24 0x0 +#define RFH25 0x200 /* Mailbox 25 Remote Frame Handling Enable */ +#define nRFH25 0x0 +#define RFH26 0x400 /* Mailbox 26 Remote Frame Handling Enable */ +#define nRFH26 0x0 +#define RFH27 0x800 /* Mailbox 27 Remote Frame Handling Enable */ +#define nRFH27 0x0 +#define RFH28 0x1000 /* Mailbox 28 Remote Frame Handling Enable */ +#define nRFH28 0x0 +#define RFH29 0x2000 /* Mailbox 29 Remote Frame Handling Enable */ +#define nRFH29 0x0 +#define RFH30 0x4000 /* Mailbox 30 Remote Frame Handling Enable */ +#define nRFH30 0x0 +#define RFH31 0x8000 /* Mailbox 31 Remote Frame Handling Enable */ +#define nRFH31 0x0 + +/* Bit masks for CAN0_MBIM1 */ + +#define MBIM0 0x1 /* Mailbox 0 Mailbox Interrupt Mask */ +#define nMBIM0 0x0 +#define MBIM1 0x2 /* Mailbox 1 Mailbox Interrupt Mask */ +#define nMBIM1 0x0 +#define MBIM2 0x4 /* Mailbox 2 Mailbox Interrupt Mask */ +#define nMBIM2 0x0 +#define MBIM3 0x8 /* Mailbox 3 Mailbox Interrupt Mask */ +#define nMBIM3 0x0 +#define MBIM4 0x10 /* Mailbox 4 Mailbox Interrupt Mask */ +#define nMBIM4 0x0 +#define MBIM5 0x20 /* Mailbox 5 Mailbox Interrupt Mask */ +#define nMBIM5 0x0 +#define MBIM6 0x40 /* Mailbox 6 Mailbox Interrupt Mask */ +#define nMBIM6 0x0 +#define MBIM7 0x80 /* Mailbox 7 Mailbox Interrupt Mask */ +#define nMBIM7 0x0 +#define MBIM8 0x100 /* Mailbox 8 Mailbox Interrupt Mask */ +#define nMBIM8 0x0 +#define MBIM9 0x200 /* Mailbox 9 Mailbox Interrupt Mask */ +#define nMBIM9 0x0 +#define MBIM10 0x400 /* Mailbox 10 Mailbox Interrupt Mask */ +#define nMBIM10 0x0 +#define MBIM11 0x800 /* Mailbox 11 Mailbox Interrupt Mask */ +#define nMBIM11 0x0 +#define MBIM12 0x1000 /* Mailbox 12 Mailbox Interrupt Mask */ +#define nMBIM12 0x0 +#define MBIM13 0x2000 /* Mailbox 13 Mailbox Interrupt Mask */ +#define nMBIM13 0x0 +#define MBIM14 0x4000 /* Mailbox 14 Mailbox Interrupt Mask */ +#define nMBIM14 0x0 +#define MBIM15 0x8000 /* Mailbox 15 Mailbox Interrupt Mask */ +#define nMBIM15 0x0 + +/* Bit masks for CAN0_MBIM2 */ + +#define MBIM16 0x1 /* Mailbox 16 Mailbox Interrupt Mask */ +#define nMBIM16 0x0 +#define MBIM17 0x2 /* Mailbox 17 Mailbox Interrupt Mask */ +#define nMBIM17 0x0 +#define MBIM18 0x4 /* Mailbox 18 Mailbox Interrupt Mask */ +#define nMBIM18 0x0 +#define MBIM19 0x8 /* Mailbox 19 Mailbox Interrupt Mask */ +#define nMBIM19 0x0 +#define MBIM20 0x10 /* Mailbox 20 Mailbox Interrupt Mask */ +#define nMBIM20 0x0 +#define MBIM21 0x20 /* Mailbox 21 Mailbox Interrupt Mask */ +#define nMBIM21 0x0 +#define MBIM22 0x40 /* Mailbox 22 Mailbox Interrupt Mask */ +#define nMBIM22 0x0 +#define MBIM23 0x80 /* Mailbox 23 Mailbox Interrupt Mask */ +#define nMBIM23 0x0 +#define MBIM24 0x100 /* Mailbox 24 Mailbox Interrupt Mask */ +#define nMBIM24 0x0 +#define MBIM25 0x200 /* Mailbox 25 Mailbox Interrupt Mask */ +#define nMBIM25 0x0 +#define MBIM26 0x400 /* Mailbox 26 Mailbox Interrupt Mask */ +#define nMBIM26 0x0 +#define MBIM27 0x800 /* Mailbox 27 Mailbox Interrupt Mask */ +#define nMBIM27 0x0 +#define MBIM28 0x1000 /* Mailbox 28 Mailbox Interrupt Mask */ +#define nMBIM28 0x0 +#define MBIM29 0x2000 /* Mailbox 29 Mailbox Interrupt Mask */ +#define nMBIM29 0x0 +#define MBIM30 0x4000 /* Mailbox 30 Mailbox Interrupt Mask */ +#define nMBIM30 0x0 +#define MBIM31 0x8000 /* Mailbox 31 Mailbox Interrupt Mask */ +#define nMBIM31 0x0 + +/* Bit masks for CAN0_MBTIF1 */ + +#define MBTIF0 0x1 /* Mailbox 0 Mailbox Transmit Interrupt Flag */ +#define nMBTIF0 0x0 +#define MBTIF1 0x2 /* Mailbox 1 Mailbox Transmit Interrupt Flag */ +#define nMBTIF1 0x0 +#define MBTIF2 0x4 /* Mailbox 2 Mailbox Transmit Interrupt Flag */ +#define nMBTIF2 0x0 +#define MBTIF3 0x8 /* Mailbox 3 Mailbox Transmit Interrupt Flag */ +#define nMBTIF3 0x0 +#define MBTIF4 0x10 /* Mailbox 4 Mailbox Transmit Interrupt Flag */ +#define nMBTIF4 0x0 +#define MBTIF5 0x20 /* Mailbox 5 Mailbox Transmit Interrupt Flag */ +#define nMBTIF5 0x0 +#define MBTIF6 0x40 /* Mailbox 6 Mailbox Transmit Interrupt Flag */ +#define nMBTIF6 0x0 +#define MBTIF7 0x80 /* Mailbox 7 Mailbox Transmit Interrupt Flag */ +#define nMBTIF7 0x0 +#define MBTIF8 0x100 /* Mailbox 8 Mailbox Transmit Interrupt Flag */ +#define nMBTIF8 0x0 +#define MBTIF9 0x200 /* Mailbox 9 Mailbox Transmit Interrupt Flag */ +#define nMBTIF9 0x0 +#define MBTIF10 0x400 /* Mailbox 10 Mailbox Transmit Interrupt Flag */ +#define nMBTIF10 0x0 +#define MBTIF11 0x800 /* Mailbox 11 Mailbox Transmit Interrupt Flag */ +#define nMBTIF11 0x0 +#define MBTIF12 0x1000 /* Mailbox 12 Mailbox Transmit Interrupt Flag */ +#define nMBTIF12 0x0 +#define MBTIF13 0x2000 /* Mailbox 13 Mailbox Transmit Interrupt Flag */ +#define nMBTIF13 0x0 +#define MBTIF14 0x4000 /* Mailbox 14 Mailbox Transmit Interrupt Flag */ +#define nMBTIF14 0x0 +#define MBTIF15 0x8000 /* Mailbox 15 Mailbox Transmit Interrupt Flag */ +#define nMBTIF15 0x0 + +/* Bit masks for CAN0_MBTIF2 */ + +#define MBTIF16 0x1 /* Mailbox 16 Mailbox Transmit Interrupt Flag */ +#define nMBTIF16 0x0 +#define MBTIF17 0x2 /* Mailbox 17 Mailbox Transmit Interrupt Flag */ +#define nMBTIF17 0x0 +#define MBTIF18 0x4 /* Mailbox 18 Mailbox Transmit Interrupt Flag */ +#define nMBTIF18 0x0 +#define MBTIF19 0x8 /* Mailbox 19 Mailbox Transmit Interrupt Flag */ +#define nMBTIF19 0x0 +#define MBTIF20 0x10 /* Mailbox 20 Mailbox Transmit Interrupt Flag */ +#define nMBTIF20 0x0 +#define MBTIF21 0x20 /* Mailbox 21 Mailbox Transmit Interrupt Flag */ +#define nMBTIF21 0x0 +#define MBTIF22 0x40 /* Mailbox 22 Mailbox Transmit Interrupt Flag */ +#define nMBTIF22 0x0 +#define MBTIF23 0x80 /* Mailbox 23 Mailbox Transmit Interrupt Flag */ +#define nMBTIF23 0x0 +#define MBTIF24 0x100 /* Mailbox 24 Mailbox Transmit Interrupt Flag */ +#define nMBTIF24 0x0 +#define MBTIF25 0x200 /* Mailbox 25 Mailbox Transmit Interrupt Flag */ +#define nMBTIF25 0x0 +#define MBTIF26 0x400 /* Mailbox 26 Mailbox Transmit Interrupt Flag */ +#define nMBTIF26 0x0 +#define MBTIF27 0x800 /* Mailbox 27 Mailbox Transmit Interrupt Flag */ +#define nMBTIF27 0x0 +#define MBTIF28 0x1000 /* Mailbox 28 Mailbox Transmit Interrupt Flag */ +#define nMBTIF28 0x0 +#define MBTIF29 0x2000 /* Mailbox 29 Mailbox Transmit Interrupt Flag */ +#define nMBTIF29 0x0 +#define MBTIF30 0x4000 /* Mailbox 30 Mailbox Transmit Interrupt Flag */ +#define nMBTIF30 0x0 +#define MBTIF31 0x8000 /* Mailbox 31 Mailbox Transmit Interrupt Flag */ +#define nMBTIF31 0x0 + +/* Bit masks for CAN0_MBRIF1 */ + +#define MBRIF0 0x1 /* Mailbox 0 Mailbox Receive Interrupt Flag */ +#define nMBRIF0 0x0 +#define MBRIF1 0x2 /* Mailbox 1 Mailbox Receive Interrupt Flag */ +#define nMBRIF1 0x0 +#define MBRIF2 0x4 /* Mailbox 2 Mailbox Receive Interrupt Flag */ +#define nMBRIF2 0x0 +#define MBRIF3 0x8 /* Mailbox 3 Mailbox Receive Interrupt Flag */ +#define nMBRIF3 0x0 +#define MBRIF4 0x10 /* Mailbox 4 Mailbox Receive Interrupt Flag */ +#define nMBRIF4 0x0 +#define MBRIF5 0x20 /* Mailbox 5 Mailbox Receive Interrupt Flag */ +#define nMBRIF5 0x0 +#define MBRIF6 0x40 /* Mailbox 6 Mailbox Receive Interrupt Flag */ +#define nMBRIF6 0x0 +#define MBRIF7 0x80 /* Mailbox 7 Mailbox Receive Interrupt Flag */ +#define nMBRIF7 0x0 +#define MBRIF8 0x100 /* Mailbox 8 Mailbox Receive Interrupt Flag */ +#define nMBRIF8 0x0 +#define MBRIF9 0x200 /* Mailbox 9 Mailbox Receive Interrupt Flag */ +#define nMBRIF9 0x0 +#define MBRIF10 0x400 /* Mailbox 10 Mailbox Receive Interrupt Flag */ +#define nMBRIF10 0x0 +#define MBRIF11 0x800 /* Mailbox 11 Mailbox Receive Interrupt Flag */ +#define nMBRIF11 0x0 +#define MBRIF12 0x1000 /* Mailbox 12 Mailbox Receive Interrupt Flag */ +#define nMBRIF12 0x0 +#define MBRIF13 0x2000 /* Mailbox 13 Mailbox Receive Interrupt Flag */ +#define nMBRIF13 0x0 +#define MBRIF14 0x4000 /* Mailbox 14 Mailbox Receive Interrupt Flag */ +#define nMBRIF14 0x0 +#define MBRIF15 0x8000 /* Mailbox 15 Mailbox Receive Interrupt Flag */ +#define nMBRIF15 0x0 + +/* Bit masks for CAN0_MBRIF2 */ + +#define MBRIF16 0x1 /* Mailbox 16 Mailbox Receive Interrupt Flag */ +#define nMBRIF16 0x0 +#define MBRIF17 0x2 /* Mailbox 17 Mailbox Receive Interrupt Flag */ +#define nMBRIF17 0x0 +#define MBRIF18 0x4 /* Mailbox 18 Mailbox Receive Interrupt Flag */ +#define nMBRIF18 0x0 +#define MBRIF19 0x8 /* Mailbox 19 Mailbox Receive Interrupt Flag */ +#define nMBRIF19 0x0 +#define MBRIF20 0x10 /* Mailbox 20 Mailbox Receive Interrupt Flag */ +#define nMBRIF20 0x0 +#define MBRIF21 0x20 /* Mailbox 21 Mailbox Receive Interrupt Flag */ +#define nMBRIF21 0x0 +#define MBRIF22 0x40 /* Mailbox 22 Mailbox Receive Interrupt Flag */ +#define nMBRIF22 0x0 +#define MBRIF23 0x80 /* Mailbox 23 Mailbox Receive Interrupt Flag */ +#define nMBRIF23 0x0 +#define MBRIF24 0x100 /* Mailbox 24 Mailbox Receive Interrupt Flag */ +#define nMBRIF24 0x0 +#define MBRIF25 0x200 /* Mailbox 25 Mailbox Receive Interrupt Flag */ +#define nMBRIF25 0x0 +#define MBRIF26 0x400 /* Mailbox 26 Mailbox Receive Interrupt Flag */ +#define nMBRIF26 0x0 +#define MBRIF27 0x800 /* Mailbox 27 Mailbox Receive Interrupt Flag */ +#define nMBRIF27 0x0 +#define MBRIF28 0x1000 /* Mailbox 28 Mailbox Receive Interrupt Flag */ +#define nMBRIF28 0x0 +#define MBRIF29 0x2000 /* Mailbox 29 Mailbox Receive Interrupt Flag */ +#define nMBRIF29 0x0 +#define MBRIF30 0x4000 /* Mailbox 30 Mailbox Receive Interrupt Flag */ +#define nMBRIF30 0x0 +#define MBRIF31 0x8000 /* Mailbox 31 Mailbox Receive Interrupt Flag */ +#define nMBRIF31 0x0 + +/* Bit masks for EPPIx_STATUS */ + +#define CFIFO_ERR 0x1 /* Chroma FIFO Error */ +#define nCFIFO_ERR 0x0 +#define YFIFO_ERR 0x2 /* Luma FIFO Error */ +#define nYFIFO_ERR 0x0 +#define LTERR_OVR 0x4 /* Line Track Overflow */ +#define nLTERR_OVR 0x0 +#define LTERR_UNDR 0x8 /* Line Track Underflow */ +#define nLTERR_UNDR 0x0 +#define FTERR_OVR 0x10 /* Frame Track Overflow */ +#define nFTERR_OVR 0x0 +#define FTERR_UNDR 0x20 /* Frame Track Underflow */ +#define nFTERR_UNDR 0x0 +#define ERR_NCOR 0x40 /* Preamble Error Not Corrected */ +#define nERR_NCOR 0x0 +#define DMA1URQ 0x80 /* DMA1 Urgent Request */ +#define nDMA1URQ 0x0 +#define DMA0URQ 0x100 /* DMA0 Urgent Request */ +#define nDMA0URQ 0x0 +#define ERR_DET 0x4000 /* Preamble Error Detected */ +#define nERR_DET 0x0 +#define FLD 0x8000 /* Field */ +#define nFLD 0x0 + +/* Bit masks for EPPIx_CONTROL */ + +#define EPPI_EN 0x1 /* Enable */ +#define nEPPI_EN 0x0 +#define EPPI_DIR 0x2 /* Direction */ +#define nEPPI_DIR 0x0 +#define XFR_TYPE 0xc /* Operating Mode */ +#define FS_CFG 0x30 /* Frame Sync Configuration */ +#define FLD_SEL 0x40 /* Field Select/Trigger */ +#define nFLD_SEL 0x0 +#define ITU_TYPE 0x80 /* ITU Interlaced or Progressive */ +#define nITU_TYPE 0x0 +#define BLANKGEN 0x100 /* ITU Output Mode with Internal Blanking Generation */ +#define nBLANKGEN 0x0 +#define ICLKGEN 0x200 /* Internal Clock Generation */ +#define nICLKGEN 0x0 +#define IFSGEN 0x400 /* Internal Frame Sync Generation */ +#define nIFSGEN 0x0 +#define POLC 0x1800 /* Frame Sync and Data Driving/Sampling Edges */ +#define POLS 0x6000 /* Frame Sync Polarity */ +#define DLENGTH 0x38000 /* Data Length */ +#define SKIP_EN 0x40000 /* Skip Enable */ +#define nSKIP_EN 0x0 +#define SKIP_EO 0x80000 /* Skip Even or Odd */ +#define nSKIP_EO 0x0 +#define PACKEN 0x100000 /* Packing/Unpacking Enable */ +#define nPACKEN 0x0 +#define SWAPEN 0x200000 /* Swap Enable */ +#define nSWAPEN 0x0 +#define SIGN_EXT 0x400000 /* Sign Extension or Zero-filled / Data Split Format */ +#define nSIGN_EXT 0x0 +#define SPLT_EVEN_ODD 0x800000 /* Split Even and Odd Data Samples */ +#define nSPLT_EVEN_ODD 0x0 +#define SUBSPLT_ODD 0x1000000 /* Sub-split Odd Samples */ +#define nSUBSPLT_ODD 0x0 +#define DMACFG 0x2000000 /* One or Two DMA Channels Mode */ +#define nDMACFG 0x0 +#define RGB_FMT_EN 0x4000000 /* RGB Formatting Enable */ +#define nRGB_FMT_EN 0x0 +#define FIFO_RWM 0x18000000 /* FIFO Regular Watermarks */ +#define FIFO_UWM 0x60000000 /* FIFO Urgent Watermarks */ + +/* Bit masks for EPPIx_FS2W_LVB */ + +#define F1VB_BD 0xff /* Vertical Blanking before Field 1 Active Data */ +#define F1VB_AD 0xff00 /* Vertical Blanking after Field 1 Active Data */ +#define F2VB_BD 0xff0000 /* Vertical Blanking before Field 2 Active Data */ +#define F2VB_AD 0xff000000 /* Vertical Blanking after Field 2 Active Data */ + +/* Bit masks for EPPIx_FS2W_LAVF */ + +#define F1_ACT 0xffff /* Number of Lines of Active Data in Field 1 */ +#define F2_ACT 0xffff0000 /* Number of Lines of Active Data in Field 2 */ + +/* Bit masks for EPPIx_CLIP */ + +#define LOW_ODD 0xff /* Lower Limit for Odd Bytes (Chroma) */ +#define HIGH_ODD 0xff00 /* Upper Limit for Odd Bytes (Chroma) */ +#define LOW_EVEN 0xff0000 /* Lower Limit for Even Bytes (Luma) */ +#define HIGH_EVEN 0xff000000 /* Upper Limit for Even Bytes (Luma) */ + +/* Bit masks for SPIx_BAUD */ + +#define SPI_BAUD 0xffff /* Baud Rate */ + +/* Bit masks for SPIx_CTL */ + +#define SPE 0x4000 /* SPI Enable */ +#define nSPE 0x0 +#define WOM 0x2000 /* Write Open Drain Master */ +#define nWOM 0x0 +#define MSTR 0x1000 /* Master Mode */ +#define nMSTR 0x0 +#define CPOL 0x800 /* Clock Polarity */ +#define nCPOL 0x0 +#define CPHA 0x400 /* Clock Phase */ +#define nCPHA 0x0 +#define LSBF 0x200 /* LSB First */ +#define nLSBF 0x0 +#define SIZE 0x100 /* Size of Words */ +#define nSIZE 0x0 +#define EMISO 0x20 /* Enable MISO Output */ +#define nEMISO 0x0 +#define PSSE 0x10 /* Slave-Select Enable */ +#define nPSSE 0x0 +#define GM 0x8 /* Get More Data */ +#define nGM 0x0 +#define SZ 0x4 /* Send Zero */ +#define nSZ 0x0 +#define TIMOD 0x3 /* Transfer Initiation Mode */ + +/* Bit masks for SPIx_FLG */ + +#define FLS1 0x2 /* Slave Select Enable 1 */ +#define nFLS1 0x0 +#define FLS2 0x4 /* Slave Select Enable 2 */ +#define nFLS2 0x0 +#define FLS3 0x8 /* Slave Select Enable 3 */ +#define nFLS3 0x0 +#define FLG1 0x200 /* Slave Select Value 1 */ +#define nFLG1 0x0 +#define FLG2 0x400 /* Slave Select Value 2 */ +#define nFLG2 0x0 +#define FLG3 0x800 /* Slave Select Value 3 */ +#define nFLG3 0x0 + +/* Bit masks for SPIx_STAT */ + +#define TXCOL 0x40 /* Transmit Collision Error */ +#define nTXCOL 0x0 +#define RXS 0x20 /* RDBR Data Buffer Status */ +#define nRXS 0x0 +#define RBSY 0x10 /* Receive Error */ +#define nRBSY 0x0 +#define TXS 0x8 /* TDBR Data Buffer Status */ +#define nTXS 0x0 +#define TXE 0x4 /* Transmission Error */ +#define nTXE 0x0 +#define MODF 0x2 /* Mode Fault Error */ +#define nMODF 0x0 +#define SPIF 0x1 /* SPI Finished */ +#define nSPIF 0x0 + +/* Bit masks for SPIx_TDBR */ + +#define TDBR 0xffff /* Transmit Data Buffer */ + +/* Bit masks for SPIx_RDBR */ + +#define RDBR 0xffff /* Receive Data Buffer */ + +/* Bit masks for SPIx_SHADOW */ + +#define SHADOW 0xffff /* RDBR Shadow */ + +/* ************************************************ */ +/* The TWI bit masks fields are from the ADSP-BF538 */ +/* and they have not been verified as the final */ +/* ones for the Moab processors ... bz 1/19/2007 */ +/* ************************************************ */ + +/* Bit masks for TWIx_CONTROL */ + +#define PRESCALE 0x7f /* Prescale Value */ +#define TWI_ENA 0x80 /* TWI Enable */ +#define nTWI_ENA 0x0 +#define SCCB 0x200 /* Serial Camera Control Bus */ +#define nSCCB 0x0 + +/* Bit maskes for TWIx_CLKDIV */ + +#define CLKLOW 0xff /* Clock Low */ +#define CLKHI 0xff00 /* Clock High */ + +/* Bit maskes for TWIx_SLAVE_CTL */ + +#define SEN 0x1 /* Slave Enable */ +#define nSEN 0x0 +#define STDVAL 0x4 /* Slave Transmit Data Valid */ +#define nSTDVAL 0x0 +#define NAK 0x8 /* Not Acknowledge */ +#define nNAK 0x0 +#define GEN 0x10 /* General Call Enable */ +#define nGEN 0x0 + +/* Bit maskes for TWIx_SLAVE_ADDR */ + +#define SADDR 0x7f /* Slave Mode Address */ + +/* Bit maskes for TWIx_SLAVE_STAT */ + +#define SDIR 0x1 /* Slave Transfer Direction */ +#define nSDIR 0x0 +#define GCALL 0x2 /* General Call */ +#define nGCALL 0x0 + +/* Bit maskes for TWIx_MASTER_CTL */ + +#define MEN 0x1 /* Master Mode Enable */ +#define nMEN 0x0 +#define MDIR 0x4 /* Master Transfer Direction */ +#define nMDIR 0x0 +#define FAST 0x8 /* Fast Mode */ +#define nFAST 0x0 +#define STOP 0x10 /* Issue Stop Condition */ +#define nSTOP 0x0 +#define RSTART 0x20 /* Repeat Start */ +#define nRSTART 0x0 +#define DCNT 0x3fc0 /* Data Transfer Count */ +#define SDAOVR 0x4000 /* Serial Data Override */ +#define nSDAOVR 0x0 +#define SCLOVR 0x8000 /* Serial Clock Override */ +#define nSCLOVR 0x0 + +/* Bit maskes for TWIx_MASTER_ADDR */ + +#define MADDR 0x7f /* Master Mode Address */ + +/* Bit maskes for TWIx_MASTER_STAT */ + +#define MPROG 0x1 /* Master Transfer in Progress */ +#define nMPROG 0x0 +#define LOSTARB 0x2 /* Lost Arbitration */ +#define nLOSTARB 0x0 +#define ANAK 0x4 /* Address Not Acknowledged */ +#define nANAK 0x0 +#define DNAK 0x8 /* Data Not Acknowledged */ +#define nDNAK 0x0 +#define BUFRDERR 0x10 /* Buffer Read Error */ +#define nBUFRDERR 0x0 +#define BUFWRERR 0x20 /* Buffer Write Error */ +#define nBUFWRERR 0x0 +#define SDASEN 0x40 /* Serial Data Sense */ +#define nSDASEN 0x0 +#define SCLSEN 0x80 /* Serial Clock Sense */ +#define nSCLSEN 0x0 +#define BUSBUSY 0x100 /* Bus Busy */ +#define nBUSBUSY 0x0 + +/* Bit maskes for TWIx_FIFO_CTL */ + +#define XMTFLUSH 0x1 /* Transmit Buffer Flush */ +#define nXMTFLUSH 0x0 +#define RCVFLUSH 0x2 /* Receive Buffer Flush */ +#define nRCVFLUSH 0x0 +#define XMTINTLEN 0x4 /* Transmit Buffer Interrupt Length */ +#define nXMTINTLEN 0x0 +#define RCVINTLEN 0x8 /* Receive Buffer Interrupt Length */ +#define nRCVINTLEN 0x0 + +/* Bit maskes for TWIx_FIFO_STAT */ + +#define XMTSTAT 0x3 /* Transmit FIFO Status */ +#define RCVSTAT 0xc /* Receive FIFO Status */ + +/* Bit maskes for TWIx_INT_MASK */ + +#define SINITM 0x1 /* Slave Transfer Initiated Interrupt Mask */ +#define nSINITM 0x0 +#define SCOMPM 0x2 /* Slave Transfer Complete Interrupt Mask */ +#define nSCOMPM 0x0 +#define SERRM 0x4 /* Slave Transfer Error Interrupt Mask */ +#define nSERRM 0x0 +#define SOVFM 0x8 /* Slave Overflow Interrupt Mask */ +#define nSOVFM 0x0 +#define MCOMPM 0x10 /* Master Transfer Complete Interrupt Mask */ +#define nMCOMPM 0x0 +#define MERRM 0x20 /* Master Transfer Error Interrupt Mask */ +#define nMERRM 0x0 +#define XMTSERVM 0x40 /* Transmit FIFO Service Interrupt Mask */ +#define nXMTSERVM 0x0 +#define RCVSERVM 0x80 /* Receive FIFO Service Interrupt Mask */ +#define nRCVSERVM 0x0 + +/* Bit maskes for TWIx_INT_STAT */ + +#define SINIT 0x1 /* Slave Transfer Initiated */ +#define nSINIT 0x0 +#define SCOMP 0x2 /* Slave Transfer Complete */ +#define nSCOMP 0x0 +#define SERR 0x4 /* Slave Transfer Error */ +#define nSERR 0x0 +#define SOVF 0x8 /* Slave Overflow */ +#define nSOVF 0x0 +#define MCOMP 0x10 /* Master Transfer Complete */ +#define nMCOMP 0x0 +#define MERR 0x20 /* Master Transfer Error */ +#define nMERR 0x0 +#define XMTSERV 0x40 /* Transmit FIFO Service */ +#define nXMTSERV 0x0 +#define RCVSERV 0x80 /* Receive FIFO Service */ +#define nRCVSERV 0x0 + +/* Bit maskes for TWIx_XMT_DATA8 */ + +#define XMTDATA8 0xff /* Transmit FIFO 8-Bit Data */ + +/* Bit maskes for TWIx_XMT_DATA16 */ + +#define XMTDATA16 0xffff /* Transmit FIFO 16-Bit Data */ + +/* Bit maskes for TWIx_RCV_DATA8 */ + +#define RCVDATA8 0xff /* Receive FIFO 8-Bit Data */ + +/* Bit maskes for TWIx_RCV_DATA16 */ + +#define RCVDATA16 0xffff /* Receive FIFO 16-Bit Data */ + +/* Bit masks for SPORTx_TCR1 */ + +#define TCKFE 0x4000 /* Clock Falling Edge Select */ +#define nTCKFE 0x0 +#define LATFS 0x2000 /* Late Transmit Frame Sync */ +#define nLATFS 0x0 +#define LTFS 0x1000 /* Low Transmit Frame Sync Select */ +#define nLTFS 0x0 +#define DITFS 0x800 /* Data-Independent Transmit Frame Sync Select */ +#define nDITFS 0x0 +#define TFSR 0x400 /* Transmit Frame Sync Required Select */ +#define nTFSR 0x0 +#define ITFS 0x200 /* Internal Transmit Frame Sync Select */ +#define nITFS 0x0 +#define TLSBIT 0x10 /* Transmit Bit Order */ +#define nTLSBIT 0x0 +#define TDTYPE 0xc /* Data Formatting Type Select */ +#define ITCLK 0x2 /* Internal Transmit Clock Select */ +#define nITCLK 0x0 +#define TSPEN 0x1 /* Transmit Enable */ +#define nTSPEN 0x0 + +/* Bit masks for SPORTx_TCR2 */ + +#define TRFST 0x400 /* Left/Right Order */ +#define nTRFST 0x0 +#define TSFSE 0x200 /* Transmit Stereo Frame Sync Enable */ +#define nTSFSE 0x0 +#define TXSE 0x100 /* TxSEC Enable */ +#define nTXSE 0x0 +#define SLEN_T 0x1f /* SPORT Word Length */ + +/* Bit masks for SPORTx_RCR1 */ + +#define RCKFE 0x4000 /* Clock Falling Edge Select */ +#define nRCKFE 0x0 +#define LARFS 0x2000 /* Late Receive Frame Sync */ +#define nLARFS 0x0 +#define LRFS 0x1000 /* Low Receive Frame Sync Select */ +#define nLRFS 0x0 +#define RFSR 0x400 /* Receive Frame Sync Required Select */ +#define nRFSR 0x0 +#define IRFS 0x200 /* Internal Receive Frame Sync Select */ +#define nIRFS 0x0 +#define RLSBIT 0x10 /* Receive Bit Order */ +#define nRLSBIT 0x0 +#define RDTYPE 0xc /* Data Formatting Type Select */ +#define IRCLK 0x2 /* Internal Receive Clock Select */ +#define nIRCLK 0x0 +#define RSPEN 0x1 /* Receive Enable */ +#define nRSPEN 0x0 + +/* Bit masks for SPORTx_RCR2 */ + +#define RRFST 0x400 /* Left/Right Order */ +#define nRRFST 0x0 +#define RSFSE 0x200 /* Receive Stereo Frame Sync Enable */ +#define nRSFSE 0x0 +#define RXSE 0x100 /* RxSEC Enable */ +#define nRXSE 0x0 +#define SLEN_R 0x1f /* SPORT Word Length */ + +/* Bit masks for SPORTx_STAT */ + +#define TXHRE 0x40 /* Transmit Hold Register Empty */ +#define nTXHRE 0x0 +#define TOVF 0x20 /* Sticky Transmit Overflow Status */ +#define nTOVF 0x0 +#define TUVF 0x10 /* Sticky Transmit Underflow Status */ +#define nTUVF 0x0 +#define TXF 0x8 /* Transmit FIFO Full Status */ +#define nTXF 0x0 +#define ROVF 0x4 /* Sticky Receive Overflow Status */ +#define nROVF 0x0 +#define RUVF 0x2 /* Sticky Receive Underflow Status */ +#define nRUVF 0x0 +#define RXNE 0x1 /* Receive FIFO Not Empty Status */ +#define nRXNE 0x0 + +/* Bit masks for SPORTx_MCMC1 */ + +#define SP_WSIZE 0xf000 /* Window Size */ +#define SP_WOFF 0x3ff /* Windows Offset */ + +/* Bit masks for SPORTx_MCMC2 */ + +#define MFD 0xf000 /* Multi channel Frame Delay */ +#define FSDR 0x80 /* Frame Sync to Data Relationship */ +#define nFSDR 0x0 +#define MCMEM 0x10 /* Multi channel Frame Mode Enable */ +#define nMCMEM 0x0 +#define MCDRXPE 0x8 /* Multi channel DMA Receive Packing */ +#define nMCDRXPE 0x0 +#define MCDTXPE 0x4 /* Multi channel DMA Transmit Packing */ +#define nMCDTXPE 0x0 +#define MCCRM 0x3 /* 2X Clock Recovery Mode */ + +/* Bit masks for SPORTx_CHNL */ + +#define CUR_CHNL 0x3ff /* Current Channel Indicator */ + +/* Bit masks for UARTx_LCR */ + +#if 0 +/* conflicts with legacy one in last section */ +#define WLS 0x3 /* Word Length Select */ +#endif +#define STB 0x4 /* Stop Bits */ +#define nSTB 0x0 +#define PEN 0x8 /* Parity Enable */ +#define nPEN 0x0 +#define EPS 0x10 /* Even Parity Select */ +#define nEPS 0x0 +#define STP 0x20 /* Sticky Parity */ +#define nSTP 0x0 +#define SB 0x40 /* Set Break */ +#define nSB 0x0 + +/* Bit masks for UARTx_MCR */ + +#define XOFF 0x1 /* Transmitter Off */ +#define nXOFF 0x0 +#define MRTS 0x2 /* Manual Request To Send */ +#define nMRTS 0x0 +#define RFIT 0x4 /* Receive FIFO IRQ Threshold */ +#define nRFIT 0x0 +#define RFRT 0x8 /* Receive FIFO RTS Threshold */ +#define nRFRT 0x0 +#define LOOP_ENA 0x10 /* Loopback Mode Enable */ +#define nLOOP_ENA 0x0 +#define FCPOL 0x20 /* Flow Control Pin Polarity */ +#define nFCPOL 0x0 +#define ARTS 0x40 /* Automatic Request To Send */ +#define nARTS 0x0 +#define ACTS 0x80 /* Automatic Clear To Send */ +#define nACTS 0x0 + +/* Bit masks for UARTx_LSR */ + +#define DR 0x1 /* Data Ready */ +#define nDR 0x0 +#define OE 0x2 /* Overrun Error */ +#define nOE 0x0 +#define PE 0x4 /* Parity Error */ +#define nPE 0x0 +#define FE 0x8 /* Framing Error */ +#define nFE 0x0 +#define BI 0x10 /* Break Interrupt */ +#define nBI 0x0 +#define THRE 0x20 /* THR Empty */ +#define nTHRE 0x0 +#define TEMT 0x40 /* Transmitter Empty */ +#define nTEMT 0x0 +#define TFI 0x80 /* Transmission Finished Indicator */ +#define nTFI 0x0 + +/* Bit masks for UARTx_MSR */ + +#define SCTS 0x1 /* Sticky CTS */ +#define nSCTS 0x0 +#define CTS 0x10 /* Clear To Send */ +#define nCTS 0x0 +#define RFCS 0x20 /* Receive FIFO Count Status */ +#define nRFCS 0x0 + +/* Bit masks for UARTx_IER_SET */ + +#define ERBFI_S 0x1 /* Enable Receive Buffer Full Interrupt */ +#define nERBFI_S 0x0 +#define ETBEI_S 0x2 /* Enable Transmit Buffer Empty Interrupt */ +#define nETBEI_S 0x0 +#define ELSI_S 0x4 /* Enable Receive Status Interrupt */ +#define nELSI_S 0x0 +#define EDSSI_S 0x8 /* Enable Modem Status Interrupt */ +#define nEDSSI_S 0x0 +#define EDTPTI_S 0x10 /* Enable DMA Transmit PIRQ Interrupt */ +#define nEDTPTI_S 0x0 +#define ETFI_S 0x20 /* Enable Transmission Finished Interrupt */ +#define nETFI_S 0x0 +#define ERFCI_S 0x40 /* Enable Receive FIFO Count Interrupt */ +#define nERFCI_S 0x0 + +/* Bit masks for UARTx_IER_CLEAR */ + +#define ERBFI_C 0x1 /* Enable Receive Buffer Full Interrupt */ +#define nERBFI_C 0x0 +#define ETBEI_C 0x2 /* Enable Transmit Buffer Empty Interrupt */ +#define nETBEI_C 0x0 +#define ELSI_C 0x4 /* Enable Receive Status Interrupt */ +#define nELSI_C 0x0 +#define EDSSI_C 0x8 /* Enable Modem Status Interrupt */ +#define nEDSSI_C 0x0 +#define EDTPTI_C 0x10 /* Enable DMA Transmit PIRQ Interrupt */ +#define nEDTPTI_C 0x0 +#define ETFI_C 0x20 /* Enable Transmission Finished Interrupt */ +#define nETFI_C 0x0 +#define ERFCI_C 0x40 /* Enable Receive FIFO Count Interrupt */ +#define nERFCI_C 0x0 + +/* Bit masks for UARTx_GCTL */ + +#define UCEN 0x1 /* UART Enable */ +#define nUCEN 0x0 +#define IREN 0x2 /* IrDA Mode Enable */ +#define nIREN 0x0 +#define TPOLC 0x4 /* IrDA TX Polarity Change */ +#define nTPOLC 0x0 +#define RPOLC 0x8 /* IrDA RX Polarity Change */ +#define nRPOLC 0x0 +#define FPE 0x10 /* Force Parity Error */ +#define nFPE 0x0 +#define FFE 0x20 /* Force Framing Error */ +#define nFFE 0x0 +#define EDBO 0x40 /* Enable Divide-by-One */ +#define nEDBO 0x0 +#define EGLSI 0x80 /* Enable Global LS Interrupt */ +#define nEGLSI 0x0 + + +/* ******************************************* */ +/* MULTI BIT MACRO ENUMERATIONS */ +/* ******************************************* */ + +/* BCODE bit field options (SYSCFG register) */ + +#define BCODE_WAKEUP 0x0000 /* boot according to wake-up condition */ +#define BCODE_FULLBOOT 0x0010 /* always perform full boot */ +#define BCODE_QUICKBOOT 0x0020 /* always perform quick boot */ +#define BCODE_NOBOOT 0x0030 /* always perform full boot */ + +/* CNT_COMMAND bit field options */ + +#define W1LCNT_ZERO 0x0001 /* write 1 to load CNT_COUNTER with zero */ +#define W1LCNT_MIN 0x0004 /* write 1 to load CNT_COUNTER from CNT_MIN */ +#define W1LCNT_MAX 0x0008 /* write 1 to load CNT_COUNTER from CNT_MAX */ + +#define W1LMIN_ZERO 0x0010 /* write 1 to load CNT_MIN with zero */ +#define W1LMIN_CNT 0x0020 /* write 1 to load CNT_MIN from CNT_COUNTER */ +#define W1LMIN_MAX 0x0080 /* write 1 to load CNT_MIN from CNT_MAX */ + +#define W1LMAX_ZERO 0x0100 /* write 1 to load CNT_MAX with zero */ +#define W1LMAX_CNT 0x0200 /* write 1 to load CNT_MAX from CNT_COUNTER */ +#define W1LMAX_MIN 0x0400 /* write 1 to load CNT_MAX from CNT_MIN */ + +/* CNT_CONFIG bit field options */ + +#define CNTMODE_QUADENC 0x0000 /* quadrature encoder mode */ +#define CNTMODE_BINENC 0x0100 /* binary encoder mode */ +#define CNTMODE_UDCNT 0x0200 /* up/down counter mode */ +#define CNTMODE_DIRCNT 0x0400 /* direction counter mode */ +#define CNTMODE_DIRTMR 0x0500 /* direction timer mode */ + +#define BNDMODE_COMP 0x0000 /* boundary compare mode */ +#define BNDMODE_ZERO 0x1000 /* boundary compare and zero mode */ +#define BNDMODE_CAPT 0x2000 /* boundary capture mode */ +#define BNDMODE_AEXT 0x3000 /* boundary auto-extend mode */ + +/* TMODE in TIMERx_CONFIG bit field options */ + +#define PWM_OUT 0x0001 +#define WDTH_CAP 0x0002 +#define EXT_CLK 0x0003 + +/* UARTx_LCR bit field options */ + +#define WLS_5 0x0000 /* 5 data bits */ +#define WLS_6 0x0001 /* 6 data bits */ +#define WLS_7 0x0002 /* 7 data bits */ +#define WLS_8 0x0003 /* 8 data bits */ + +/* PINTx Register Bit Definitions */ + +#define PIQ0 0x00000001 +#define PIQ1 0x00000002 +#define PIQ2 0x00000004 +#define PIQ3 0x00000008 + +#define PIQ4 0x00000010 +#define PIQ5 0x00000020 +#define PIQ6 0x00000040 +#define PIQ7 0x00000080 + +#define PIQ8 0x00000100 +#define PIQ9 0x00000200 +#define PIQ10 0x00000400 +#define PIQ11 0x00000800 + +#define PIQ12 0x00001000 +#define PIQ13 0x00002000 +#define PIQ14 0x00004000 +#define PIQ15 0x00008000 + +#define PIQ16 0x00010000 +#define PIQ17 0x00020000 +#define PIQ18 0x00040000 +#define PIQ19 0x00080000 + +#define PIQ20 0x00100000 +#define PIQ21 0x00200000 +#define PIQ22 0x00400000 +#define PIQ23 0x00800000 + +#define PIQ24 0x01000000 +#define PIQ25 0x02000000 +#define PIQ26 0x04000000 +#define PIQ27 0x08000000 + +#define PIQ28 0x10000000 +#define PIQ29 0x20000000 +#define PIQ30 0x40000000 +#define PIQ31 0x80000000 + +/* PORT A Bit Definitions for the registers +PORTA, PORTA_SET, PORTA_CLEAR, +PORTA_DIR_SET, PORTA_DIR_CLEAR, PORTA_INEN, +PORTA_FER registers +*/ + +#define PA0 0x0001 +#define PA1 0x0002 +#define PA2 0x0004 +#define PA3 0x0008 +#define PA4 0x0010 +#define PA5 0x0020 +#define PA6 0x0040 +#define PA7 0x0080 +#define PA8 0x0100 +#define PA9 0x0200 +#define PA10 0x0400 +#define PA11 0x0800 +#define PA12 0x1000 +#define PA13 0x2000 +#define PA14 0x4000 +#define PA15 0x8000 + +/* PORT B Bit Definitions for the registers +PORTB, PORTB_SET, PORTB_CLEAR, +PORTB_DIR_SET, PORTB_DIR_CLEAR, PORTB_INEN, +PORTB_FER registers +*/ + +#define PB0 0x0001 +#define PB1 0x0002 +#define PB2 0x0004 +#define PB3 0x0008 +#define PB4 0x0010 +#define PB5 0x0020 +#define PB6 0x0040 +#define PB7 0x0080 +#define PB8 0x0100 +#define PB9 0x0200 +#define PB10 0x0400 +#define PB11 0x0800 +#define PB12 0x1000 +#define PB13 0x2000 +#define PB14 0x4000 + + +/* PORT C Bit Definitions for the registers +PORTC, PORTC_SET, PORTC_CLEAR, +PORTC_DIR_SET, PORTC_DIR_CLEAR, PORTC_INEN, +PORTC_FER registers +*/ + + +#define PC0 0x0001 +#define PC1 0x0002 +#define PC2 0x0004 +#define PC3 0x0008 +#define PC4 0x0010 +#define PC5 0x0020 +#define PC6 0x0040 +#define PC7 0x0080 +#define PC8 0x0100 +#define PC9 0x0200 +#define PC10 0x0400 +#define PC11 0x0800 +#define PC12 0x1000 +#define PC13 0x2000 + + +/* PORT D Bit Definitions for the registers +PORTD, PORTD_SET, PORTD_CLEAR, +PORTD_DIR_SET, PORTD_DIR_CLEAR, PORTD_INEN, +PORTD_FER registers +*/ + +#define PD0 0x0001 +#define PD1 0x0002 +#define PD2 0x0004 +#define PD3 0x0008 +#define PD4 0x0010 +#define PD5 0x0020 +#define PD6 0x0040 +#define PD7 0x0080 +#define PD8 0x0100 +#define PD9 0x0200 +#define PD10 0x0400 +#define PD11 0x0800 +#define PD12 0x1000 +#define PD13 0x2000 +#define PD14 0x4000 +#define PD15 0x8000 + +/* PORT E Bit Definitions for the registers +PORTE, PORTE_SET, PORTE_CLEAR, +PORTE_DIR_SET, PORTE_DIR_CLEAR, PORTE_INEN, +PORTE_FER registers +*/ + + +#define PE0 0x0001 +#define PE1 0x0002 +#define PE2 0x0004 +#define PE3 0x0008 +#define PE4 0x0010 +#define PE5 0x0020 +#define PE6 0x0040 +#define PE7 0x0080 +#define PE8 0x0100 +#define PE9 0x0200 +#define PE10 0x0400 +#define PE11 0x0800 +#define PE12 0x1000 +#define PE13 0x2000 +#define PE14 0x4000 +#define PE15 0x8000 + +/* PORT F Bit Definitions for the registers +PORTF, PORTF_SET, PORTF_CLEAR, +PORTF_DIR_SET, PORTF_DIR_CLEAR, PORTF_INEN, +PORTF_FER registers +*/ + + +#define PF0 0x0001 +#define PF1 0x0002 +#define PF2 0x0004 +#define PF3 0x0008 +#define PF4 0x0010 +#define PF5 0x0020 +#define PF6 0x0040 +#define PF7 0x0080 +#define PF8 0x0100 +#define PF9 0x0200 +#define PF10 0x0400 +#define PF11 0x0800 +#define PF12 0x1000 +#define PF13 0x2000 +#define PF14 0x4000 +#define PF15 0x8000 + +/* PORT G Bit Definitions for the registers +PORTG, PORTG_SET, PORTG_CLEAR, +PORTG_DIR_SET, PORTG_DIR_CLEAR, PORTG_INEN, +PORTG_FER registers +*/ + + +#define PG0 0x0001 +#define PG1 0x0002 +#define PG2 0x0004 +#define PG3 0x0008 +#define PG4 0x0010 +#define PG5 0x0020 +#define PG6 0x0040 +#define PG7 0x0080 +#define PG8 0x0100 +#define PG9 0x0200 +#define PG10 0x0400 +#define PG11 0x0800 +#define PG12 0x1000 +#define PG13 0x2000 +#define PG14 0x4000 +#define PG15 0x8000 + +/* PORT H Bit Definitions for the registers +PORTH, PORTH_SET, PORTH_CLEAR, +PORTH_DIR_SET, PORTH_DIR_CLEAR, PORTH_INEN, +PORTH_FER registers +*/ + + +#define PH0 0x0001 +#define PH1 0x0002 +#define PH2 0x0004 +#define PH3 0x0008 +#define PH4 0x0010 +#define PH5 0x0020 +#define PH6 0x0040 +#define PH7 0x0080 +#define PH8 0x0100 +#define PH9 0x0200 +#define PH10 0x0400 +#define PH11 0x0800 +#define PH12 0x1000 +#define PH13 0x2000 + + +/* PORT I Bit Definitions for the registers +PORTI, PORTI_SET, PORTI_CLEAR, +PORTI_DIR_SET, PORTI_DIR_CLEAR, PORTI_INEN, +PORTI_FER registers +*/ + + +#define PI0 0x0001 +#define PI1 0x0002 +#define PI2 0x0004 +#define PI3 0x0008 +#define PI4 0x0010 +#define PI5 0x0020 +#define PI6 0x0040 +#define PI7 0x0080 +#define PI8 0x0100 +#define PI9 0x0200 +#define PI10 0x0400 +#define PI11 0x0800 +#define PI12 0x1000 +#define PI13 0x2000 +#define PI14 0x4000 +#define PI15 0x8000 + +/* PORT J Bit Definitions for the registers +PORTJ, PORTJ_SET, PORTJ_CLEAR, +PORTJ_DIR_SET, PORTJ_DIR_CLEAR, PORTJ_INEN, +PORTJ_FER registers +*/ + + +#define PJ0 0x0001 +#define PJ1 0x0002 +#define PJ2 0x0004 +#define PJ3 0x0008 +#define PJ4 0x0010 +#define PJ5 0x0020 +#define PJ6 0x0040 +#define PJ7 0x0080 +#define PJ8 0x0100 +#define PJ9 0x0200 +#define PJ10 0x0400 +#define PJ11 0x0800 +#define PJ12 0x1000 +#define PJ13 0x2000 + + +/* Port Muxing Bit Fields for PORTx_MUX Registers */ + +#define MUX0 0x00000003 +#define MUX0_0 0x00000000 +#define MUX0_1 0x00000001 +#define MUX0_2 0x00000002 +#define MUX0_3 0x00000003 + +#define MUX1 0x0000000C +#define MUX1_0 0x00000000 +#define MUX1_1 0x00000004 +#define MUX1_2 0x00000008 +#define MUX1_3 0x0000000C + +#define MUX2 0x00000030 +#define MUX2_0 0x00000000 +#define MUX2_1 0x00000010 +#define MUX2_2 0x00000020 +#define MUX2_3 0x00000030 + +#define MUX3 0x000000C0 +#define MUX3_0 0x00000000 +#define MUX3_1 0x00000040 +#define MUX3_2 0x00000080 +#define MUX3_3 0x000000C0 + +#define MUX4 0x00000300 +#define MUX4_0 0x00000000 +#define MUX4_1 0x00000100 +#define MUX4_2 0x00000200 +#define MUX4_3 0x00000300 + +#define MUX5 0x00000C00 +#define MUX5_0 0x00000000 +#define MUX5_1 0x00000400 +#define MUX5_2 0x00000800 +#define MUX5_3 0x00000C00 + +#define MUX6 0x00003000 +#define MUX6_0 0x00000000 +#define MUX6_1 0x00001000 +#define MUX6_2 0x00002000 +#define MUX6_3 0x00003000 + +#define MUX7 0x0000C000 +#define MUX7_0 0x00000000 +#define MUX7_1 0x00004000 +#define MUX7_2 0x00008000 +#define MUX7_3 0x0000C000 + +#define MUX8 0x00030000 +#define MUX8_0 0x00000000 +#define MUX8_1 0x00010000 +#define MUX8_2 0x00020000 +#define MUX8_3 0x00030000 + +#define MUX9 0x000C0000 +#define MUX9_0 0x00000000 +#define MUX9_1 0x00040000 +#define MUX9_2 0x00080000 +#define MUX9_3 0x000C0000 + +#define MUX10 0x00300000 +#define MUX10_0 0x00000000 +#define MUX10_1 0x00100000 +#define MUX10_2 0x00200000 +#define MUX10_3 0x00300000 + +#define MUX11 0x00C00000 +#define MUX11_0 0x00000000 +#define MUX11_1 0x00400000 +#define MUX11_2 0x00800000 +#define MUX11_3 0x00C00000 + +#define MUX12 0x03000000 +#define MUX12_0 0x00000000 +#define MUX12_1 0x01000000 +#define MUX12_2 0x02000000 +#define MUX12_3 0x03000000 + +#define MUX13 0x0C000000 +#define MUX13_0 0x00000000 +#define MUX13_1 0x04000000 +#define MUX13_2 0x08000000 +#define MUX13_3 0x0C000000 + +#define MUX14 0x30000000 +#define MUX14_0 0x00000000 +#define MUX14_1 0x10000000 +#define MUX14_2 0x20000000 +#define MUX14_3 0x30000000 + +#define MUX15 0xC0000000 +#define MUX15_0 0x00000000 +#define MUX15_1 0x40000000 +#define MUX15_2 0x80000000 +#define MUX15_3 0xC0000000 + +#define MUX(b15,b14,b13,b12,b11,b10,b9,b8,b7,b6,b5,b4,b3,b2,b1,b0) \ + ((((b15)&3) << 30) | \ + (((b14)&3) << 28) | \ + (((b13)&3) << 26) | \ + (((b12)&3) << 24) | \ + (((b11)&3) << 22) | \ + (((b10)&3) << 20) | \ + (((b9) &3) << 18) | \ + (((b8) &3) << 16) | \ + (((b7) &3) << 14) | \ + (((b6) &3) << 12) | \ + (((b5) &3) << 10) | \ + (((b4) &3) << 8) | \ + (((b3) &3) << 6) | \ + (((b2) &3) << 4) | \ + (((b1) &3) << 2) | \ + (((b0) &3))) + +/* Bit fields for PINT0_ASSIGN and PINT1_ASSIGN registers */ + +#define B0MAP 0x000000FF /* Byte 0 Lower Half Port Mapping */ +#define B0MAP_PAL 0x00000000 /* Map Port A Low to Byte 0 */ +#define B0MAP_PBL 0x00000001 /* Map Port B Low to Byte 0 */ +#define B1MAP 0x0000FF00 /* Byte 1 Upper Half Port Mapping */ +#define B1MAP_PAH 0x00000000 /* Map Port A High to Byte 1 */ +#define B1MAP_PBH 0x00000100 /* Map Port B High to Byte 1 */ +#define B2MAP 0x00FF0000 /* Byte 2 Lower Half Port Mapping */ +#define B2MAP_PAL 0x00000000 /* Map Port A Low to Byte 2 */ +#define B2MAP_PBL 0x00010000 /* Map Port B Low to Byte 2 */ +#define B3MAP 0xFF000000 /* Byte 3 Upper Half Port Mapping */ +#define B3MAP_PAH 0x00000000 /* Map Port A High to Byte 3 */ +#define B3MAP_PBH 0x01000000 /* Map Port B High to Byte 3 */ + +/* Bit fields for PINT2_ASSIGN and PINT3_ASSIGN registers */ + +#define B0MAP_PCL 0x00000000 /* Map Port C Low to Byte 0 */ +#define B0MAP_PDL 0x00000001 /* Map Port D Low to Byte 0 */ +#define B0MAP_PEL 0x00000002 /* Map Port E Low to Byte 0 */ +#define B0MAP_PFL 0x00000003 /* Map Port F Low to Byte 0 */ +#define B0MAP_PGL 0x00000004 /* Map Port G Low to Byte 0 */ +#define B0MAP_PHL 0x00000005 /* Map Port H Low to Byte 0 */ +#define B0MAP_PIL 0x00000006 /* Map Port I Low to Byte 0 */ +#define B0MAP_PJL 0x00000007 /* Map Port J Low to Byte 0 */ + +#define B1MAP_PCH 0x00000000 /* Map Port C High to Byte 1 */ +#define B1MAP_PDH 0x00000100 /* Map Port D High to Byte 1 */ +#define B1MAP_PEH 0x00000200 /* Map Port E High to Byte 1 */ +#define B1MAP_PFH 0x00000300 /* Map Port F High to Byte 1 */ +#define B1MAP_PGH 0x00000400 /* Map Port G High to Byte 1 */ +#define B1MAP_PHH 0x00000500 /* Map Port H High to Byte 1 */ +#define B1MAP_PIH 0x00000600 /* Map Port I High to Byte 1 */ +#define B1MAP_PJH 0x00000700 /* Map Port J High to Byte 1 */ + +#define B2MAP_PCL 0x00000000 /* Map Port C Low to Byte 2 */ +#define B2MAP_PDL 0x00010000 /* Map Port D Low to Byte 2 */ +#define B2MAP_PEL 0x00020000 /* Map Port E Low to Byte 2 */ +#define B2MAP_PFL 0x00030000 /* Map Port F Low to Byte 2 */ +#define B2MAP_PGL 0x00040000 /* Map Port G Low to Byte 2 */ +#define B2MAP_PHL 0x00050000 /* Map Port H Low to Byte 2 */ +#define B2MAP_PIL 0x00060000 /* Map Port I Low to Byte 2 */ +#define B2MAP_PJL 0x00070000 /* Map Port J Low to Byte 2 */ + +#define B3MAP_PCH 0x00000000 /* Map Port C High to Byte 3 */ +#define B3MAP_PDH 0x01000000 /* Map Port D High to Byte 3 */ +#define B3MAP_PEH 0x02000000 /* Map Port E High to Byte 3 */ +#define B3MAP_PFH 0x03000000 /* Map Port F High to Byte 3 */ +#define B3MAP_PGH 0x04000000 /* Map Port G High to Byte 3 */ +#define B3MAP_PHH 0x05000000 /* Map Port H High to Byte 3 */ +#define B3MAP_PIH 0x06000000 /* Map Port I High to Byte 3 */ +#define B3MAP_PJH 0x07000000 /* Map Port J High to Byte 3 */ + + +/* for legacy compatibility */ + +#define WLS(x) (((x)-5) & 0x03) /* Word Length Select */ +#define W1LMAX_MAX W1LMAX_MIN +#define EBIU_AMCBCTL0 EBIU_AMBCTL0 +#define EBIU_AMCBCTL1 EBIU_AMBCTL1 +#define PINT0_IRQ PINT0_REQUEST +#define PINT1_IRQ PINT1_REQUEST +#define PINT2_IRQ PINT2_REQUEST +#define PINT3_IRQ PINT3_REQUEST + +#endif /* _DEF_BF54X_H */ diff --git a/include/asm-blackfin/mach-bf561/cdefBF561.h b/include/asm-blackfin/mach-bf561/cdefBF561.h index 5dc0ed8354474a..b14f872e5703cb 100644 --- a/include/asm-blackfin/mach-bf561/cdefBF561.h +++ b/include/asm-blackfin/mach-bf561/cdefBF561.h @@ -59,12 +59,14 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val) { unsigned long flags, iwr; - bfin_write16(VR_CTL, val); - __builtin_bfin_ssync(); /* Enable the PLL Wakeup bit in SIC IWR */ iwr = bfin_read32(SICA_IWR0); /* Only allow PPL Wakeup) */ bfin_write32(SICA_IWR0, IWR_ENABLE(0)); + + bfin_write16(VR_CTL, val); + __builtin_bfin_ssync(); + local_irq_save(flags); asm("IDLE;"); local_irq_restore(flags); diff --git a/include/asm-blackfin/mach-bf561/defBF561.h b/include/asm-blackfin/mach-bf561/defBF561.h index a6de4c69ba5541..89150ecb909d58 100644 --- a/include/asm-blackfin/mach-bf561/defBF561.h +++ b/include/asm-blackfin/mach-bf561/defBF561.h @@ -904,23 +904,6 @@ #define IWR_ENABLE(x) (1 << (x)) /* Wakeup Enable Peripheral #x */ #define IWR_DISABLE(x) (0xFFFFFFFF ^ (1 << (x))) /* Wakeup Disable Peripheral #x */ -/* ********* WATCHDOG TIMER MASKS ********************8 */ - -/* Watchdog Timer WDOG_CTL Register */ -#define ICTL(x) ((x<<1) & 0x0006) -#define ENABLE_RESET 0x00000000 /* Set Watchdog Timer to generate reset */ -#define ENABLE_NMI 0x00000002 /* Set Watchdog Timer to generate non-maskable interrupt */ -#define ENABLE_GPI 0x00000004 /* Set Watchdog Timer to generate general-purpose interrupt */ -#define DISABLE_EVT 0x00000006 /* Disable Watchdog Timer interrupts */ - -#define TMR_EN 0x0000 -#define TMR_DIS 0x0AD0 -#define TRO 0x8000 - -#define ICTL_P0 0x01 -#define ICTL_P1 0x02 -#define TRO_P 0x0F - /* ***************************** UART CONTROLLER MASKS ********************** */ /* UART_LCR Register */ @@ -1214,18 +1197,18 @@ #define TIMIL9 0x0002 #define TIMIL10 0x0004 #define TIMIL11 0x0008 -#define TOVL_ERR0 0x00000010 -#define TOVL_ERR1 0x00000020 -#define TOVL_ERR2 0x00000040 -#define TOVL_ERR3 0x00000080 -#define TOVL_ERR4 0x00100000 -#define TOVL_ERR5 0x00200000 -#define TOVL_ERR6 0x00400000 -#define TOVL_ERR7 0x00800000 -#define TOVL_ERR8 0x0010 -#define TOVL_ERR9 0x0020 -#define TOVL_ERR10 0x0040 -#define TOVL_ERR11 0x0080 +#define TOVF_ERR0 0x00000010 +#define TOVF_ERR1 0x00000020 +#define TOVF_ERR2 0x00000040 +#define TOVF_ERR3 0x00000080 +#define TOVF_ERR4 0x00100000 +#define TOVF_ERR5 0x00200000 +#define TOVF_ERR6 0x00400000 +#define TOVF_ERR7 0x00800000 +#define TOVF_ERR8 0x0010 +#define TOVF_ERR9 0x0020 +#define TOVF_ERR10 0x0040 +#define TOVF_ERR11 0x0080 #define TRUN0 0x00001000 #define TRUN1 0x00002000 #define TRUN2 0x00004000 @@ -1251,18 +1234,18 @@ #define TIMIL9_P 0x01 #define TIMIL10_P 0x02 #define TIMIL11_P 0x03 -#define TOVL_ERR0_P 0x04 -#define TOVL_ERR1_P 0x05 -#define TOVL_ERR2_P 0x06 -#define TOVL_ERR3_P 0x07 -#define TOVL_ERR4_P 0x14 -#define TOVL_ERR5_P 0x15 -#define TOVL_ERR6_P 0x16 -#define TOVL_ERR7_P 0x17 -#define TOVL_ERR8_P 0x04 -#define TOVL_ERR9_P 0x05 -#define TOVL_ERR10_P 0x06 -#define TOVL_ERR11_P 0x07 +#define TOVF_ERR0_P 0x04 +#define TOVF_ERR1_P 0x05 +#define TOVF_ERR2_P 0x06 +#define TOVF_ERR3_P 0x07 +#define TOVF_ERR4_P 0x14 +#define TOVF_ERR5_P 0x15 +#define TOVF_ERR6_P 0x16 +#define TOVF_ERR7_P 0x17 +#define TOVF_ERR8_P 0x04 +#define TOVF_ERR9_P 0x05 +#define TOVF_ERR10_P 0x06 +#define TOVF_ERR11_P 0x07 #define TRUN0_P 0x0C #define TRUN1_P 0x0D #define TRUN2_P 0x0E @@ -1276,6 +1259,32 @@ #define TRUN10_P 0x0E #define TRUN11_P 0x0F +/* Alternate Deprecated Macros Provided For Backwards Code Compatibility */ +#define TOVL_ERR0 TOVF_ERR0 +#define TOVL_ERR1 TOVF_ERR1 +#define TOVL_ERR2 TOVF_ERR2 +#define TOVL_ERR3 TOVF_ERR3 +#define TOVL_ERR4 TOVF_ERR4 +#define TOVL_ERR5 TOVF_ERR5 +#define TOVL_ERR6 TOVF_ERR6 +#define TOVL_ERR7 TOVF_ERR7 +#define TOVL_ERR8 TOVF_ERR8 +#define TOVL_ERR9 TOVF_ERR9 +#define TOVL_ERR10 TOVF_ERR10 +#define TOVL_ERR11 TOVF_ERR11 +#define TOVL_ERR0_P TOVF_ERR0_P +#define TOVL_ERR1_P TOVF_ERR1_P +#define TOVL_ERR2_P TOVF_ERR2_P +#define TOVL_ERR3_P TOVF_ERR3_P +#define TOVL_ERR4_P TOVF_ERR4_P +#define TOVL_ERR5_P TOVF_ERR5_P +#define TOVL_ERR6_P TOVF_ERR6_P +#define TOVL_ERR7_P TOVF_ERR7_P +#define TOVL_ERR8_P TOVF_ERR8_P +#define TOVL_ERR9_P TOVF_ERR9_P +#define TOVL_ERR10_P TOVF_ERR10_P +#define TOVL_ERR11_P TOVF_ERR11_P + /* TIMERx_CONFIG Registers */ #define PWM_OUT 0x0001 #define WDTH_CAP 0x0002 @@ -1700,18 +1709,4 @@ #define SDEASE 0x00000010 /* SDRAM EAB sticky error status - W1C */ #define BGSTAT 0x00000020 /* Bus granted */ -/*VR_CTL Masks*/ -#define WAKE 0x100 -#define VLEV_6 0x60 -#define VLEV_7 0x70 -#define VLEV_8 0x80 -#define VLEV_9 0x90 -#define VLEV_10 0xA0 -#define VLEV_11 0xB0 -#define VLEV_12 0xC0 -#define VLEV_13 0xD0 -#define VLEV_14 0xE0 -#define VLEV_15 0xF0 -#define FREQ_3 0x03 - #endif /* _DEF_BF561_H */ diff --git a/include/asm-blackfin/mach-common/cdef_LPBlackfin.h b/include/asm-blackfin/mach-common/cdef_LPBlackfin.h index 22aa5e637993f7..d39c396f850df6 100644 --- a/include/asm-blackfin/mach-common/cdef_LPBlackfin.h +++ b/include/asm-blackfin/mach-common/cdef_LPBlackfin.h @@ -36,417 +36,288 @@ #include <asm/mach-common/def_LPBlackfin.h> /*Cache & SRAM Memory*/ -#define pSRAM_BASE_ADDRESS ((volatile void **)SRAM_BASE_ADDRESS) #define bfin_read_SRAM_BASE_ADDRESS() bfin_read32(SRAM_BASE_ADDRESS) #define bfin_write_SRAM_BASE_ADDRESS(val) bfin_write32(SRAM_BASE_ADDRESS,val) -#define pDMEM_CONTROL ((volatile unsigned long *)DMEM_CONTROL) #define bfin_read_DMEM_CONTROL() bfin_read32(DMEM_CONTROL) #define bfin_write_DMEM_CONTROL(val) bfin_write32(DMEM_CONTROL,val) -#define pDCPLB_STATUS ((volatile unsigned long *)DCPLB_STATUS) #define bfin_read_DCPLB_STATUS() bfin_read32(DCPLB_STATUS) #define bfin_write_DCPLB_STATUS(val) bfin_write32(DCPLB_STATUS,val) -#define pDCPLB_FAULT_ADDR ((volatile void **)DCPLB_FAULT_ADDR) #define bfin_read_DCPLB_FAULT_ADDR() bfin_read32(DCPLB_FAULT_ADDR) #define bfin_write_DCPLB_FAULT_ADDR(val) bfin_write32(DCPLB_FAULT_ADDR,val) /* #define MMR_TIMEOUT 0xFFE00010 */ -#define pDCPLB_ADDR0 ((volatile void **)DCPLB_ADDR0) #define bfin_read_DCPLB_ADDR0() bfin_read32(DCPLB_ADDR0) #define bfin_write_DCPLB_ADDR0(val) bfin_write32(DCPLB_ADDR0,val) -#define pDCPLB_ADDR1 ((volatile void **)DCPLB_ADDR1) #define bfin_read_DCPLB_ADDR1() bfin_read32(DCPLB_ADDR1) #define bfin_write_DCPLB_ADDR1(val) bfin_write32(DCPLB_ADDR1,val) -#define pDCPLB_ADDR2 ((volatile void **)DCPLB_ADDR2) #define bfin_read_DCPLB_ADDR2() bfin_read32(DCPLB_ADDR2) #define bfin_write_DCPLB_ADDR2(val) bfin_write32(DCPLB_ADDR2,val) -#define pDCPLB_ADDR3 ((volatile void **)DCPLB_ADDR3) #define bfin_read_DCPLB_ADDR3() bfin_read32(DCPLB_ADDR3) #define bfin_write_DCPLB_ADDR3(val) bfin_write32(DCPLB_ADDR3,val) -#define pDCPLB_ADDR4 ((volatile void **)DCPLB_ADDR4) #define bfin_read_DCPLB_ADDR4() bfin_read32(DCPLB_ADDR4) #define bfin_write_DCPLB_ADDR4(val) bfin_write32(DCPLB_ADDR4,val) -#define pDCPLB_ADDR5 ((volatile void **)DCPLB_ADDR5) #define bfin_read_DCPLB_ADDR5() bfin_read32(DCPLB_ADDR5) #define bfin_write_DCPLB_ADDR5(val) bfin_write32(DCPLB_ADDR5,val) -#define pDCPLB_ADDR6 ((volatile void **)DCPLB_ADDR6) #define bfin_read_DCPLB_ADDR6() bfin_read32(DCPLB_ADDR6) #define bfin_write_DCPLB_ADDR6(val) bfin_write32(DCPLB_ADDR6,val) -#define pDCPLB_ADDR7 ((volatile void **)DCPLB_ADDR7) #define bfin_read_DCPLB_ADDR7() bfin_read32(DCPLB_ADDR7) #define bfin_write_DCPLB_ADDR7(val) bfin_write32(DCPLB_ADDR7,val) -#define pDCPLB_ADDR8 ((volatile void **)DCPLB_ADDR8) #define bfin_read_DCPLB_ADDR8() bfin_read32(DCPLB_ADDR8) #define bfin_write_DCPLB_ADDR8(val) bfin_write32(DCPLB_ADDR8,val) -#define pDCPLB_ADDR9 ((volatile void **)DCPLB_ADDR9) #define bfin_read_DCPLB_ADDR9() bfin_read32(DCPLB_ADDR9) #define bfin_write_DCPLB_ADDR9(val) bfin_write32(DCPLB_ADDR9,val) -#define pDCPLB_ADDR10 ((volatile void **)DCPLB_ADDR10) #define bfin_read_DCPLB_ADDR10() bfin_read32(DCPLB_ADDR10) #define bfin_write_DCPLB_ADDR10(val) bfin_write32(DCPLB_ADDR10,val) -#define pDCPLB_ADDR11 ((volatile void **)DCPLB_ADDR11) #define bfin_read_DCPLB_ADDR11() bfin_read32(DCPLB_ADDR11) #define bfin_write_DCPLB_ADDR11(val) bfin_write32(DCPLB_ADDR11,val) -#define pDCPLB_ADDR12 ((volatile void **)DCPLB_ADDR12) #define bfin_read_DCPLB_ADDR12() bfin_read32(DCPLB_ADDR12) #define bfin_write_DCPLB_ADDR12(val) bfin_write32(DCPLB_ADDR12,val) -#define pDCPLB_ADDR13 ((volatile void **)DCPLB_ADDR13) #define bfin_read_DCPLB_ADDR13() bfin_read32(DCPLB_ADDR13) #define bfin_write_DCPLB_ADDR13(val) bfin_write32(DCPLB_ADDR13,val) -#define pDCPLB_ADDR14 ((volatile void **)DCPLB_ADDR14) #define bfin_read_DCPLB_ADDR14() bfin_read32(DCPLB_ADDR14) #define bfin_write_DCPLB_ADDR14(val) bfin_write32(DCPLB_ADDR14,val) -#define pDCPLB_ADDR15 ((volatile void **)DCPLB_ADDR15) #define bfin_read_DCPLB_ADDR15() bfin_read32(DCPLB_ADDR15) #define bfin_write_DCPLB_ADDR15(val) bfin_write32(DCPLB_ADDR15,val) -#define pDCPLB_DATA0 ((volatile unsigned long *)DCPLB_DATA0) #define bfin_read_DCPLB_DATA0() bfin_read32(DCPLB_DATA0) #define bfin_write_DCPLB_DATA0(val) bfin_write32(DCPLB_DATA0,val) -#define pDCPLB_DATA1 ((volatile unsigned long *)DCPLB_DATA1) #define bfin_read_DCPLB_DATA1() bfin_read32(DCPLB_DATA1) #define bfin_write_DCPLB_DATA1(val) bfin_write32(DCPLB_DATA1,val) -#define pDCPLB_DATA2 ((volatile unsigned long *)DCPLB_DATA2) #define bfin_read_DCPLB_DATA2() bfin_read32(DCPLB_DATA2) #define bfin_write_DCPLB_DATA2(val) bfin_write32(DCPLB_DATA2,val) -#define pDCPLB_DATA3 ((volatile unsigned long *)DCPLB_DATA3) #define bfin_read_DCPLB_DATA3() bfin_read32(DCPLB_DATA3) #define bfin_write_DCPLB_DATA3(val) bfin_write32(DCPLB_DATA3,val) -#define pDCPLB_DATA4 ((volatile unsigned long *)DCPLB_DATA4) #define bfin_read_DCPLB_DATA4() bfin_read32(DCPLB_DATA4) #define bfin_write_DCPLB_DATA4(val) bfin_write32(DCPLB_DATA4,val) -#define pDCPLB_DATA5 ((volatile unsigned long *)DCPLB_DATA5) #define bfin_read_DCPLB_DATA5() bfin_read32(DCPLB_DATA5) #define bfin_write_DCPLB_DATA5(val) bfin_write32(DCPLB_DATA5,val) -#define pDCPLB_DATA6 ((volatile unsigned long *)DCPLB_DATA6) #define bfin_read_DCPLB_DATA6() bfin_read32(DCPLB_DATA6) #define bfin_write_DCPLB_DATA6(val) bfin_write32(DCPLB_DATA6,val) -#define pDCPLB_DATA7 ((volatile unsigned long *)DCPLB_DATA7) #define bfin_read_DCPLB_DATA7() bfin_read32(DCPLB_DATA7) #define bfin_write_DCPLB_DATA7(val) bfin_write32(DCPLB_DATA7,val) -#define pDCPLB_DATA8 ((volatile unsigned long *)DCPLB_DATA8) #define bfin_read_DCPLB_DATA8() bfin_read32(DCPLB_DATA8) #define bfin_write_DCPLB_DATA8(val) bfin_write32(DCPLB_DATA8,val) -#define pDCPLB_DATA9 ((volatile unsigned long *)DCPLB_DATA9) #define bfin_read_DCPLB_DATA9() bfin_read32(DCPLB_DATA9) #define bfin_write_DCPLB_DATA9(val) bfin_write32(DCPLB_DATA9,val) -#define pDCPLB_DATA10 ((volatile unsigned long *)DCPLB_DATA10) #define bfin_read_DCPLB_DATA10() bfin_read32(DCPLB_DATA10) #define bfin_write_DCPLB_DATA10(val) bfin_write32(DCPLB_DATA10,val) -#define pDCPLB_DATA11 ((volatile unsigned long *)DCPLB_DATA11) #define bfin_read_DCPLB_DATA11() bfin_read32(DCPLB_DATA11) #define bfin_write_DCPLB_DATA11(val) bfin_write32(DCPLB_DATA11,val) -#define pDCPLB_DATA12 ((volatile unsigned long *)DCPLB_DATA12) #define bfin_read_DCPLB_DATA12() bfin_read32(DCPLB_DATA12) #define bfin_write_DCPLB_DATA12(val) bfin_write32(DCPLB_DATA12,val) -#define pDCPLB_DATA13 ((volatile unsigned long *)DCPLB_DATA13) #define bfin_read_DCPLB_DATA13() bfin_read32(DCPLB_DATA13) #define bfin_write_DCPLB_DATA13(val) bfin_write32(DCPLB_DATA13,val) -#define pDCPLB_DATA14 ((volatile unsigned long *)DCPLB_DATA14) #define bfin_read_DCPLB_DATA14() bfin_read32(DCPLB_DATA14) #define bfin_write_DCPLB_DATA14(val) bfin_write32(DCPLB_DATA14,val) -#define pDCPLB_DATA15 ((volatile unsigned long *)DCPLB_DATA15) #define bfin_read_DCPLB_DATA15() bfin_read32(DCPLB_DATA15) #define bfin_write_DCPLB_DATA15(val) bfin_write32(DCPLB_DATA15,val) -#define pDTEST_COMMAND ((volatile unsigned long *)DTEST_COMMAND) #define bfin_read_DTEST_COMMAND() bfin_read32(DTEST_COMMAND) #define bfin_write_DTEST_COMMAND(val) bfin_write32(DTEST_COMMAND,val) /* #define DTEST_INDEX 0xFFE00304 */ -#define pDTEST_DATA0 ((volatile unsigned long *)DTEST_DATA0) #define bfin_read_DTEST_DATA0() bfin_read32(DTEST_DATA0) #define bfin_write_DTEST_DATA0(val) bfin_write32(DTEST_DATA0,val) -#define pDTEST_DATA1 ((volatile unsigned long *)DTEST_DATA1) #define bfin_read_DTEST_DATA1() bfin_read32(DTEST_DATA1) #define bfin_write_DTEST_DATA1(val) bfin_write32(DTEST_DATA1,val) /* #define DTEST_DATA2 0xFFE00408 #define DTEST_DATA3 0xFFE0040C */ -#define pIMEM_CONTROL ((volatile unsigned long *)IMEM_CONTROL) #define bfin_read_IMEM_CONTROL() bfin_read32(IMEM_CONTROL) #define bfin_write_IMEM_CONTROL(val) bfin_write32(IMEM_CONTROL,val) -#define pICPLB_STATUS ((volatile unsigned long *)ICPLB_STATUS) #define bfin_read_ICPLB_STATUS() bfin_read32(ICPLB_STATUS) #define bfin_write_ICPLB_STATUS(val) bfin_write32(ICPLB_STATUS,val) -#define pICPLB_FAULT_ADDR ((volatile void **)ICPLB_FAULT_ADDR) #define bfin_read_ICPLB_FAULT_ADDR() bfin_read32(ICPLB_FAULT_ADDR) #define bfin_write_ICPLB_FAULT_ADDR(val) bfin_write32(ICPLB_FAULT_ADDR,val) -#define pICPLB_ADDR0 ((volatile void **)ICPLB_ADDR0) #define bfin_read_ICPLB_ADDR0() bfin_read32(ICPLB_ADDR0) #define bfin_write_ICPLB_ADDR0(val) bfin_write32(ICPLB_ADDR0,val) -#define pICPLB_ADDR1 ((volatile void **)ICPLB_ADDR1) #define bfin_read_ICPLB_ADDR1() bfin_read32(ICPLB_ADDR1) #define bfin_write_ICPLB_ADDR1(val) bfin_write32(ICPLB_ADDR1,val) -#define pICPLB_ADDR2 ((volatile void **)ICPLB_ADDR2) #define bfin_read_ICPLB_ADDR2() bfin_read32(ICPLB_ADDR2) #define bfin_write_ICPLB_ADDR2(val) bfin_write32(ICPLB_ADDR2,val) -#define pICPLB_ADDR3 ((volatile void **)ICPLB_ADDR3) #define bfin_read_ICPLB_ADDR3() bfin_read32(ICPLB_ADDR3) #define bfin_write_ICPLB_ADDR3(val) bfin_write32(ICPLB_ADDR3,val) -#define pICPLB_ADDR4 ((volatile void **)ICPLB_ADDR4) #define bfin_read_ICPLB_ADDR4() bfin_read32(ICPLB_ADDR4) #define bfin_write_ICPLB_ADDR4(val) bfin_write32(ICPLB_ADDR4,val) -#define pICPLB_ADDR5 ((volatile void **)ICPLB_ADDR5) #define bfin_read_ICPLB_ADDR5() bfin_read32(ICPLB_ADDR5) #define bfin_write_ICPLB_ADDR5(val) bfin_write32(ICPLB_ADDR5,val) -#define pICPLB_ADDR6 ((volatile void **)ICPLB_ADDR6) #define bfin_read_ICPLB_ADDR6() bfin_read32(ICPLB_ADDR6) #define bfin_write_ICPLB_ADDR6(val) bfin_write32(ICPLB_ADDR6,val) -#define pICPLB_ADDR7 ((volatile void **)ICPLB_ADDR7) #define bfin_read_ICPLB_ADDR7() bfin_read32(ICPLB_ADDR7) #define bfin_write_ICPLB_ADDR7(val) bfin_write32(ICPLB_ADDR7,val) -#define pICPLB_ADDR8 ((volatile void **)ICPLB_ADDR8) #define bfin_read_ICPLB_ADDR8() bfin_read32(ICPLB_ADDR8) #define bfin_write_ICPLB_ADDR8(val) bfin_write32(ICPLB_ADDR8,val) -#define pICPLB_ADDR9 ((volatile void **)ICPLB_ADDR9) #define bfin_read_ICPLB_ADDR9() bfin_read32(ICPLB_ADDR9) #define bfin_write_ICPLB_ADDR9(val) bfin_write32(ICPLB_ADDR9,val) -#define pICPLB_ADDR10 ((volatile void **)ICPLB_ADDR10) #define bfin_read_ICPLB_ADDR10() bfin_read32(ICPLB_ADDR10) #define bfin_write_ICPLB_ADDR10(val) bfin_write32(ICPLB_ADDR10,val) -#define pICPLB_ADDR11 ((volatile void **)ICPLB_ADDR11) #define bfin_read_ICPLB_ADDR11() bfin_read32(ICPLB_ADDR11) #define bfin_write_ICPLB_ADDR11(val) bfin_write32(ICPLB_ADDR11,val) -#define pICPLB_ADDR12 ((volatile void **)ICPLB_ADDR12) #define bfin_read_ICPLB_ADDR12() bfin_read32(ICPLB_ADDR12) #define bfin_write_ICPLB_ADDR12(val) bfin_write32(ICPLB_ADDR12,val) -#define pICPLB_ADDR13 ((volatile void **)ICPLB_ADDR13) #define bfin_read_ICPLB_ADDR13() bfin_read32(ICPLB_ADDR13) #define bfin_write_ICPLB_ADDR13(val) bfin_write32(ICPLB_ADDR13,val) -#define pICPLB_ADDR14 ((volatile void **)ICPLB_ADDR14) #define bfin_read_ICPLB_ADDR14() bfin_read32(ICPLB_ADDR14) #define bfin_write_ICPLB_ADDR14(val) bfin_write32(ICPLB_ADDR14,val) -#define pICPLB_ADDR15 ((volatile void **)ICPLB_ADDR15) #define bfin_read_ICPLB_ADDR15() bfin_read32(ICPLB_ADDR15) #define bfin_write_ICPLB_ADDR15(val) bfin_write32(ICPLB_ADDR15,val) -#define pICPLB_DATA0 ((volatile unsigned long *)ICPLB_DATA0) #define bfin_read_ICPLB_DATA0() bfin_read32(ICPLB_DATA0) #define bfin_write_ICPLB_DATA0(val) bfin_write32(ICPLB_DATA0,val) -#define pICPLB_DATA1 ((volatile unsigned long *)ICPLB_DATA1) #define bfin_read_ICPLB_DATA1() bfin_read32(ICPLB_DATA1) #define bfin_write_ICPLB_DATA1(val) bfin_write32(ICPLB_DATA1,val) -#define pICPLB_DATA2 ((volatile unsigned long *)ICPLB_DATA2) #define bfin_read_ICPLB_DATA2() bfin_read32(ICPLB_DATA2) #define bfin_write_ICPLB_DATA2(val) bfin_write32(ICPLB_DATA2,val) -#define pICPLB_DATA3 ((volatile unsigned long *)ICPLB_DATA3) #define bfin_read_ICPLB_DATA3() bfin_read32(ICPLB_DATA3) #define bfin_write_ICPLB_DATA3(val) bfin_write32(ICPLB_DATA3,val) -#define pICPLB_DATA4 ((volatile unsigned long *)ICPLB_DATA4) #define bfin_read_ICPLB_DATA4() bfin_read32(ICPLB_DATA4) #define bfin_write_ICPLB_DATA4(val) bfin_write32(ICPLB_DATA4,val) -#define pICPLB_DATA5 ((volatile unsigned long *)ICPLB_DATA5) #define bfin_read_ICPLB_DATA5() bfin_read32(ICPLB_DATA5) #define bfin_write_ICPLB_DATA5(val) bfin_write32(ICPLB_DATA5,val) -#define pICPLB_DATA6 ((volatile unsigned long *)ICPLB_DATA6) #define bfin_read_ICPLB_DATA6() bfin_read32(ICPLB_DATA6) #define bfin_write_ICPLB_DATA6(val) bfin_write32(ICPLB_DATA6,val) -#define pICPLB_DATA7 ((volatile unsigned long *)ICPLB_DATA7) #define bfin_read_ICPLB_DATA7() bfin_read32(ICPLB_DATA7) #define bfin_write_ICPLB_DATA7(val) bfin_write32(ICPLB_DATA7,val) -#define pICPLB_DATA8 ((volatile unsigned long *)ICPLB_DATA8) #define bfin_read_ICPLB_DATA8() bfin_read32(ICPLB_DATA8) #define bfin_write_ICPLB_DATA8(val) bfin_write32(ICPLB_DATA8,val) -#define pICPLB_DATA9 ((volatile unsigned long *)ICPLB_DATA9) #define bfin_read_ICPLB_DATA9() bfin_read32(ICPLB_DATA9) #define bfin_write_ICPLB_DATA9(val) bfin_write32(ICPLB_DATA9,val) -#define pICPLB_DATA10 ((volatile unsigned long *)ICPLB_DATA10) #define bfin_read_ICPLB_DATA10() bfin_read32(ICPLB_DATA10) #define bfin_write_ICPLB_DATA10(val) bfin_write32(ICPLB_DATA10,val) -#define pICPLB_DATA11 ((volatile unsigned long *)ICPLB_DATA11) #define bfin_read_ICPLB_DATA11() bfin_read32(ICPLB_DATA11) #define bfin_write_ICPLB_DATA11(val) bfin_write32(ICPLB_DATA11,val) -#define pICPLB_DATA12 ((volatile unsigned long *)ICPLB_DATA12) #define bfin_read_ICPLB_DATA12() bfin_read32(ICPLB_DATA12) #define bfin_write_ICPLB_DATA12(val) bfin_write32(ICPLB_DATA12,val) -#define pICPLB_DATA13 ((volatile unsigned long *)ICPLB_DATA13) #define bfin_read_ICPLB_DATA13() bfin_read32(ICPLB_DATA13) #define bfin_write_ICPLB_DATA13(val) bfin_write32(ICPLB_DATA13,val) -#define pICPLB_DATA14 ((volatile unsigned long *)ICPLB_DATA14) #define bfin_read_ICPLB_DATA14() bfin_read32(ICPLB_DATA14) #define bfin_write_ICPLB_DATA14(val) bfin_write32(ICPLB_DATA14,val) -#define pICPLB_DATA15 ((volatile unsigned long *)ICPLB_DATA15) #define bfin_read_ICPLB_DATA15() bfin_read32(ICPLB_DATA15) #define bfin_write_ICPLB_DATA15(val) bfin_write32(ICPLB_DATA15,val) -#define pITEST_COMMAND ((volatile unsigned long *)ITEST_COMMAND) #define bfin_read_ITEST_COMMAND() bfin_read32(ITEST_COMMAND) #define bfin_write_ITEST_COMMAND(val) bfin_write32(ITEST_COMMAND,val) #if 0 #define ITEST_INDEX 0xFFE01304 /* Instruction Test Index Register */ #endif -#define pITEST_DATA0 ((volatile unsigned long *)ITEST_DATA0) #define bfin_read_ITEST_DATA0() bfin_read32(ITEST_DATA0) #define bfin_write_ITEST_DATA0(val) bfin_write32(ITEST_DATA0,val) -#define pITEST_DATA1 ((volatile unsigned long *)ITEST_DATA1) #define bfin_read_ITEST_DATA1() bfin_read32(ITEST_DATA1) #define bfin_write_ITEST_DATA1(val) bfin_write32(ITEST_DATA1,val) /* Event/Interrupt Registers*/ -#define pEVT0 ((volatile void **)EVT0) #define bfin_read_EVT0() bfin_read32(EVT0) #define bfin_write_EVT0(val) bfin_write32(EVT0,val) -#define pEVT1 ((volatile void **)EVT1) #define bfin_read_EVT1() bfin_read32(EVT1) #define bfin_write_EVT1(val) bfin_write32(EVT1,val) -#define pEVT2 ((volatile void **)EVT2) #define bfin_read_EVT2() bfin_read32(EVT2) #define bfin_write_EVT2(val) bfin_write32(EVT2,val) -#define pEVT3 ((volatile void **)EVT3) #define bfin_read_EVT3() bfin_read32(EVT3) #define bfin_write_EVT3(val) bfin_write32(EVT3,val) -#define pEVT4 ((volatile void **)EVT4) #define bfin_read_EVT4() bfin_read32(EVT4) #define bfin_write_EVT4(val) bfin_write32(EVT4,val) -#define pEVT5 ((volatile void **)EVT5) #define bfin_read_EVT5() bfin_read32(EVT5) #define bfin_write_EVT5(val) bfin_write32(EVT5,val) -#define pEVT6 ((volatile void **)EVT6) #define bfin_read_EVT6() bfin_read32(EVT6) #define bfin_write_EVT6(val) bfin_write32(EVT6,val) -#define pEVT7 ((volatile void **)EVT7) #define bfin_read_EVT7() bfin_read32(EVT7) #define bfin_write_EVT7(val) bfin_write32(EVT7,val) -#define pEVT8 ((volatile void **)EVT8) #define bfin_read_EVT8() bfin_read32(EVT8) #define bfin_write_EVT8(val) bfin_write32(EVT8,val) -#define pEVT9 ((volatile void **)EVT9) #define bfin_read_EVT9() bfin_read32(EVT9) #define bfin_write_EVT9(val) bfin_write32(EVT9,val) -#define pEVT10 ((volatile void **)EVT10) #define bfin_read_EVT10() bfin_read32(EVT10) #define bfin_write_EVT10(val) bfin_write32(EVT10,val) -#define pEVT11 ((volatile void **)EVT11) #define bfin_read_EVT11() bfin_read32(EVT11) #define bfin_write_EVT11(val) bfin_write32(EVT11,val) -#define pEVT12 ((volatile void **)EVT12) #define bfin_read_EVT12() bfin_read32(EVT12) #define bfin_write_EVT12(val) bfin_write32(EVT12,val) -#define pEVT13 ((volatile void **)EVT13) #define bfin_read_EVT13() bfin_read32(EVT13) #define bfin_write_EVT13(val) bfin_write32(EVT13,val) -#define pEVT14 ((volatile void **)EVT14) #define bfin_read_EVT14() bfin_read32(EVT14) #define bfin_write_EVT14(val) bfin_write32(EVT14,val) -#define pEVT15 ((volatile void **)EVT15) #define bfin_read_EVT15() bfin_read32(EVT15) #define bfin_write_EVT15(val) bfin_write32(EVT15,val) -#define pIMASK ((volatile unsigned long *)IMASK) #define bfin_read_IMASK() bfin_read32(IMASK) #define bfin_write_IMASK(val) bfin_write32(IMASK,val) -#define pIPEND ((volatile unsigned long *)IPEND) #define bfin_read_IPEND() bfin_read32(IPEND) #define bfin_write_IPEND(val) bfin_write32(IPEND,val) -#define pILAT ((volatile unsigned long *)ILAT) #define bfin_read_ILAT() bfin_read32(ILAT) #define bfin_write_ILAT(val) bfin_write32(ILAT,val) /*Core Timer Registers*/ -#define pTCNTL ((volatile unsigned long *)TCNTL) #define bfin_read_TCNTL() bfin_read32(TCNTL) #define bfin_write_TCNTL(val) bfin_write32(TCNTL,val) -#define pTPERIOD ((volatile unsigned long *)TPERIOD) #define bfin_read_TPERIOD() bfin_read32(TPERIOD) #define bfin_write_TPERIOD(val) bfin_write32(TPERIOD,val) -#define pTSCALE ((volatile unsigned long *)TSCALE) #define bfin_read_TSCALE() bfin_read32(TSCALE) #define bfin_write_TSCALE(val) bfin_write32(TSCALE,val) -#define pTCOUNT ((volatile unsigned long *)TCOUNT) #define bfin_read_TCOUNT() bfin_read32(TCOUNT) #define bfin_write_TCOUNT(val) bfin_write32(TCOUNT,val) /*Debug/MP/Emulation Registers*/ -#define pDSPID ((volatile unsigned long *)DSPID) #define bfin_read_DSPID() bfin_read32(DSPID) #define bfin_write_DSPID(val) bfin_write32(DSPID,val) -#define pDBGCTL ((volatile unsigned long *)DBGCTL) #define bfin_read_DBGCTL() bfin_read32(DBGCTL) #define bfin_write_DBGCTL(val) bfin_write32(DBGCTL,val) -#define pDBGSTAT ((volatile unsigned long *)DBGSTAT) #define bfin_read_DBGSTAT() bfin_read32(DBGSTAT) #define bfin_write_DBGSTAT(val) bfin_write32(DBGSTAT,val) -#define pEMUDAT ((volatile unsigned long *)EMUDAT) #define bfin_read_EMUDAT() bfin_read32(EMUDAT) #define bfin_write_EMUDAT(val) bfin_write32(EMUDAT,val) /*Trace Buffer Registers*/ -#define pTBUFCTL ((volatile unsigned long *)TBUFCTL) #define bfin_read_TBUFCTL() bfin_read32(TBUFCTL) #define bfin_write_TBUFCTL(val) bfin_write32(TBUFCTL,val) -#define pTBUFSTAT ((volatile unsigned long *)TBUFSTAT) #define bfin_read_TBUFSTAT() bfin_read32(TBUFSTAT) #define bfin_write_TBUFSTAT(val) bfin_write32(TBUFSTAT,val) -#define pTBUF ((volatile void **)TBUF) #define bfin_read_TBUF() bfin_read32(TBUF) #define bfin_write_TBUF(val) bfin_write32(TBUF,val) /*Watch Point Control Registers*/ -#define pWPIACTL ((volatile unsigned long *)WPIACTL) #define bfin_read_WPIACTL() bfin_read32(WPIACTL) #define bfin_write_WPIACTL(val) bfin_write32(WPIACTL,val) -#define pWPIA0 ((volatile void **)WPIA0) #define bfin_read_WPIA0() bfin_read32(WPIA0) #define bfin_write_WPIA0(val) bfin_write32(WPIA0,val) -#define pWPIA1 ((volatile void **)WPIA1) #define bfin_read_WPIA1() bfin_read32(WPIA1) #define bfin_write_WPIA1(val) bfin_write32(WPIA1,val) -#define pWPIA2 ((volatile void **)WPIA2) #define bfin_read_WPIA2() bfin_read32(WPIA2) #define bfin_write_WPIA2(val) bfin_write32(WPIA2,val) -#define pWPIA3 ((volatile void **)WPIA3) #define bfin_read_WPIA3() bfin_read32(WPIA3) #define bfin_write_WPIA3(val) bfin_write32(WPIA3,val) -#define pWPIA4 ((volatile void **)WPIA4) #define bfin_read_WPIA4() bfin_read32(WPIA4) #define bfin_write_WPIA4(val) bfin_write32(WPIA4,val) -#define pWPIA5 ((volatile void **)WPIA5) #define bfin_read_WPIA5() bfin_read32(WPIA5) #define bfin_write_WPIA5(val) bfin_write32(WPIA5,val) -#define pWPIACNT0 ((volatile unsigned long *)WPIACNT0) #define bfin_read_WPIACNT0() bfin_read32(WPIACNT0) #define bfin_write_WPIACNT0(val) bfin_write32(WPIACNT0,val) -#define pWPIACNT1 ((volatile unsigned long *)WPIACNT1) #define bfin_read_WPIACNT1() bfin_read32(WPIACNT1) #define bfin_write_WPIACNT1(val) bfin_write32(WPIACNT1,val) -#define pWPIACNT2 ((volatile unsigned long *)WPIACNT2) #define bfin_read_WPIACNT2() bfin_read32(WPIACNT2) #define bfin_write_WPIACNT2(val) bfin_write32(WPIACNT2,val) -#define pWPIACNT3 ((volatile unsigned long *)WPIACNT3) #define bfin_read_WPIACNT3() bfin_read32(WPIACNT3) #define bfin_write_WPIACNT3(val) bfin_write32(WPIACNT3,val) -#define pWPIACNT4 ((volatile unsigned long *)WPIACNT4) #define bfin_read_WPIACNT4() bfin_read32(WPIACNT4) #define bfin_write_WPIACNT4(val) bfin_write32(WPIACNT4,val) -#define pWPIACNT5 ((volatile unsigned long *)WPIACNT5) #define bfin_read_WPIACNT5() bfin_read32(WPIACNT5) #define bfin_write_WPIACNT5(val) bfin_write32(WPIACNT5,val) -#define pWPDACTL ((volatile unsigned long *)WPDACTL) #define bfin_read_WPDACTL() bfin_read32(WPDACTL) #define bfin_write_WPDACTL(val) bfin_write32(WPDACTL,val) -#define pWPDA0 ((volatile void **)WPDA0) #define bfin_read_WPDA0() bfin_read32(WPDA0) #define bfin_write_WPDA0(val) bfin_write32(WPDA0,val) -#define pWPDA1 ((volatile void **)WPDA1) #define bfin_read_WPDA1() bfin_read32(WPDA1) #define bfin_write_WPDA1(val) bfin_write32(WPDA1,val) -#define pWPDACNT0 ((volatile unsigned long *)WPDACNT0) #define bfin_read_WPDACNT0() bfin_read32(WPDACNT0) #define bfin_write_WPDACNT0(val) bfin_write32(WPDACNT0,val) -#define pWPDACNT1 ((volatile unsigned long *)WPDACNT1) #define bfin_read_WPDACNT1() bfin_read32(WPDACNT1) #define bfin_write_WPDACNT1(val) bfin_write32(WPDACNT1,val) -#define pWPSTAT ((volatile unsigned long *)WPSTAT) #define bfin_read_WPSTAT() bfin_read32(WPSTAT) #define bfin_write_WPSTAT(val) bfin_write32(WPSTAT,val) /*Performance Monitor Registers*/ -#define pPFCTL ((volatile unsigned long *)PFCTL) #define bfin_read_PFCTL() bfin_read32(PFCTL) #define bfin_write_PFCTL(val) bfin_write32(PFCTL,val) -#define pPFCNTR0 ((volatile unsigned long *)PFCNTR0) #define bfin_read_PFCNTR0() bfin_read32(PFCNTR0) #define bfin_write_PFCNTR0(val) bfin_write32(PFCNTR0,val) -#define pPFCNTR1 ((volatile unsigned long *)PFCNTR1) #define bfin_read_PFCNTR1() bfin_read32(PFCNTR1) #define bfin_write_PFCNTR1(val) bfin_write32(PFCNTR1,val) @@ -454,18 +325,4 @@ #define IPRIO 0xFFE02110 */ -#if defined(CONFIG_BFIN_ALIVE_LED) -#define pCONFIG_BFIN_ALIVE_LED_DPORT \ - (volatile unsigned short *)CONFIG_BFIN_ALIVE_LED_DPORT -#define pCONFIG_BFIN_ALIVE_LED_PORT \ - (volatile unsigned short *)CONFIG_BFIN_ALIVE_LED_PORT -#endif - -#if defined(CONFIG_BFIN_IDLE_LED) -#define pCONFIG_BFIN_IDLE_LED_DPORT \ - (volatile unsigned short *)CONFIG_BFIN_IDLE_LED_DPORT -#define pCONFIG_BFIN_IDLE_LED_PORT \ - (volatile unsigned short *)CONFIG_BFIN_IDLE_LED_PORT -#endif - #endif /* _CDEF_LPBLACKFIN_H */ diff --git a/include/asm-blackfin/processor.h b/include/asm-blackfin/processor.h index 0336ff132c16db..aba2b30a8ed813 100644 --- a/include/asm-blackfin/processor.h +++ b/include/asm-blackfin/processor.h @@ -104,13 +104,13 @@ unsigned long get_wchan(struct task_struct *p); #define cpu_relax() barrier() /* Get the Silicon Revision of the chip */ -static inline uint32_t bfin_revid(void) +static inline __attribute_pure__ uint32_t bfin_revid(void) { /* stored in the upper 4 bits */ return bfin_read_CHIPID() >> 28; } -static inline uint32_t bfin_compiled_revid(void) +static inline __attribute_pure__ uint32_t bfin_compiled_revid(void) { #if defined(CONFIG_BF_REV_0_0) return 0; diff --git a/include/asm-blackfin/uaccess.h b/include/asm-blackfin/uaccess.h index bfcb6794c67267..2233f8f9314d9d 100644 --- a/include/asm-blackfin/uaccess.h +++ b/include/asm-blackfin/uaccess.h @@ -14,7 +14,7 @@ #include <linux/string.h> #include <asm/segment.h> -#ifndef CONFIG_NO_ACCESS_CHECK +#ifdef CONFIG_ACCESS_CHECK # include <asm/bfin-global.h> #endif @@ -56,7 +56,7 @@ static inline int is_in_rom(unsigned long addr) * get_fs() == KERNEL_DS, checking is bypassed. */ -#ifdef CONFIG_NO_ACCESS_CHECK +#ifndef CONFIG_ACCESS_CHECK static inline int _access_ok(unsigned long addr, unsigned long size) { return 1; } #else #ifdef CONFIG_ACCESS_OK_L1 diff --git a/include/asm-generic/bug.h b/include/asm-generic/bug.h index 14fae1fa87dfa3..7f30cce528573c 100644 --- a/include/asm-generic/bug.h +++ b/include/asm-generic/bug.h @@ -35,7 +35,7 @@ struct bug_entry { #define WARN_ON(condition) ({ \ typeof(condition) __ret_warn_on = (condition); \ if (unlikely(__ret_warn_on)) { \ - printk("BUG: at %s:%d %s()\n", __FILE__, \ + printk("WARNING: at %s:%d %s()\n", __FILE__, \ __LINE__, __FUNCTION__); \ dump_stack(); \ } \ diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h index f3806a74c4784c..8307b1bb337a05 100644 --- a/include/asm-generic/vmlinux.lds.h +++ b/include/asm-generic/vmlinux.lds.h @@ -9,6 +9,11 @@ /* Align . to a 8 byte boundary equals to maximum function alignment. */ #define ALIGN_FUNCTION() . = ALIGN(8) +/* .data section */ +#define DATA_DATA \ + *(.data) \ + *(.data.init.refok) + #define RODATA \ . = ALIGN(4096); \ .rodata : AT(ADDR(.rodata) - LOAD_OFFSET) { \ @@ -139,6 +144,13 @@ VMLINUX_SYMBOL(__security_initcall_end) = .; \ } +/* .text section. Map to function alignment to avoid address changes + * during second ld run in second ld pass when generating System.map */ +#define TEXT_TEXT \ + ALIGN_FUNCTION(); \ + *(.text) \ + *(.text.init.refok) + /* sched.text is aling to function alignment to secure we have same * address even at second ld pass when generating System.map */ #define SCHED_TEXT \ diff --git a/include/asm-i386/atomic.h b/include/asm-i386/atomic.h index 0baa2f89463c70..437aac80171131 100644 --- a/include/asm-i386/atomic.h +++ b/include/asm-i386/atomic.h @@ -182,7 +182,7 @@ static __inline__ int atomic_add_return(int i, atomic_t *v) int __i; #ifdef CONFIG_M386 unsigned long flags; - if(unlikely(boot_cpu_data.x86==3)) + if(unlikely(boot_cpu_data.x86 <= 3)) goto no_xadd; #endif /* Modern 486+ processor */ diff --git a/include/asm-i386/local.h b/include/asm-i386/local.h index e13d3e98823f90..6e85975b9ed239 100644 --- a/include/asm-i386/local.h +++ b/include/asm-i386/local.h @@ -135,7 +135,7 @@ static __inline__ long local_add_return(long i, local_t *l) long __i; #ifdef CONFIG_M386 unsigned long flags; - if(unlikely(boot_cpu_data.x86==3)) + if(unlikely(boot_cpu_data.x86 <= 3)) goto no_xadd; #endif /* Modern 486+ processor */ diff --git a/include/asm-i386/tlbflush.h b/include/asm-i386/tlbflush.h index db7f77eacfa039..fc525c5cd5a9dd 100644 --- a/include/asm-i386/tlbflush.h +++ b/include/asm-i386/tlbflush.h @@ -90,6 +90,8 @@ #ifndef CONFIG_SMP +#include <linux/sched.h> + #define flush_tlb() __flush_tlb() #define flush_tlb_all() __flush_tlb_all() #define local_flush_tlb() __flush_tlb() diff --git a/include/asm-ia64/acpi.h b/include/asm-ia64/acpi.h index 5d03792d4f65f9..5b526357d178fa 100644 --- a/include/asm-ia64/acpi.h +++ b/include/asm-ia64/acpi.h @@ -30,6 +30,8 @@ #ifdef __KERNEL__ +#include <acpi/pdc_intel.h> + #include <linux/init.h> #include <linux/numa.h> #include <asm/system.h> @@ -119,11 +121,6 @@ extern int __devinitdata pxm_to_nid_map[MAX_PXM_DOMAINS]; extern int __initdata nid_to_pxm_map[MAX_NUMNODES]; #endif -/* - * Refer Intel ACPI _PDC support document for bit definitions - */ -#define ACPI_PDC_EST_CAPABILITY_SMP 0x8 - #endif /*__KERNEL__*/ #endif /*_ASM_ACPI_H*/ diff --git a/include/asm-ia64/kdebug.h b/include/asm-ia64/kdebug.h index ba211e011a1d4d..320cd8e754ea44 100644 --- a/include/asm-ia64/kdebug.h +++ b/include/asm-ia64/kdebug.h @@ -28,14 +28,24 @@ */ #include <linux/notifier.h> -extern int register_page_fault_notifier(struct notifier_block *); -extern int unregister_page_fault_notifier(struct notifier_block *); +/* + * These are only here because kprobes.c wants them to implement a + * blatant layering violation. Will hopefully go away soon once all + * architectures are updated. + */ +static inline int register_page_fault_notifier(struct notifier_block *nb) +{ + return 0; +} +static inline int unregister_page_fault_notifier(struct notifier_block *nb) +{ + return 0; +} enum die_val { DIE_BREAK = 1, DIE_FAULT, DIE_OOPS, - DIE_PAGE_FAULT, DIE_MACHINE_HALT, DIE_MACHINE_RESTART, DIE_MCA_MONARCH_ENTER, diff --git a/include/asm-ia64/kprobes.h b/include/asm-ia64/kprobes.h index 2abc98b336f3f6..6382e52ec2272b 100644 --- a/include/asm-ia64/kprobes.h +++ b/include/asm-ia64/kprobes.h @@ -120,6 +120,7 @@ struct arch_specific_insn { unsigned short slot; }; +extern int kprobes_fault_handler(struct pt_regs *regs, int trapnr); extern int kprobe_exceptions_notify(struct notifier_block *self, unsigned long val, void *data); diff --git a/include/asm-ia64/unistd.h b/include/asm-ia64/unistd.h index f049bc40ca7d53..441c9e0017762b 100644 --- a/include/asm-ia64/unistd.h +++ b/include/asm-ia64/unistd.h @@ -296,11 +296,27 @@ #define __NR_getcpu 1304 #define __NR_epoll_pwait 1305 #define __NR_utimensat 1306 +#define __NR_signalfd 1307 +#define __NR_timerfd 1308 +#define __NR_eventfd 1309 #ifdef __KERNEL__ -#define NR_syscalls 283 /* length of syscall table */ +#define NR_syscalls 286 /* length of syscall table */ + +/* + * The following defines stop scripts/checksyscalls.sh from complaining about + * unimplemented system calls. Glibc provides for each of these by using + * more modern equivalent system calls. + */ +#define __IGNORE_fork /* clone() */ +#define __IGNORE_time /* gettimeofday() */ +#define __IGNORE_alarm /* setitimer(ITIMER_REAL, ... */ +#define __IGNORE_pause /* rt_sigprocmask(), rt_sigsuspend() */ +#define __IGNORE_utime /* utimes() */ +#define __IGNORE_getpgrp /* getpgid() */ +#define __IGNORE_vfork /* clone() */ #define __ARCH_WANT_SYS_RT_SIGACTION #define __ARCH_WANT_SYS_RT_SIGSUSPEND diff --git a/include/asm-mips/pgalloc.h b/include/asm-mips/pgalloc.h index 5685d4fc7881e0..9fb57c035213ca 100644 --- a/include/asm-mips/pgalloc.h +++ b/include/asm-mips/pgalloc.h @@ -11,6 +11,7 @@ #include <linux/highmem.h> #include <linux/mm.h> +#include <linux/sched.h> static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, pte_t *pte) diff --git a/include/asm-parisc/mmu_context.h b/include/asm-parisc/mmu_context.h index bad690298f0c01..85856c74ad1ddd 100644 --- a/include/asm-parisc/mmu_context.h +++ b/include/asm-parisc/mmu_context.h @@ -2,6 +2,7 @@ #define __PARISC_MMU_CONTEXT_H #include <linux/mm.h> +#include <linux/sched.h> #include <asm/atomic.h> #include <asm/pgalloc.h> #include <asm/pgtable.h> diff --git a/include/asm-parisc/tlbflush.h b/include/asm-parisc/tlbflush.h index 3313da9ea00f31..270cf309772bef 100644 --- a/include/asm-parisc/tlbflush.h +++ b/include/asm-parisc/tlbflush.h @@ -4,6 +4,7 @@ /* TLB flushing routines.... */ #include <linux/mm.h> +#include <linux/sched.h> #include <asm/mmu_context.h> diff --git a/include/asm-powerpc/cputable.h b/include/asm-powerpc/cputable.h index 434524931ef377..82d595a52109e9 100644 --- a/include/asm-powerpc/cputable.h +++ b/include/asm-powerpc/cputable.h @@ -302,6 +302,12 @@ extern void do_feature_fixups(unsigned long value, void *fixup_start, CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \ CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \ CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE) +#define CPU_FTRS_7448 (CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE | \ + CPU_FTR_USE_TB | \ + CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \ + CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \ + CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \ + CPU_FTR_PPC_LE) #define CPU_FTRS_82XX (CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE | \ CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB) #define CPU_FTRS_G2_LE (CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_MAYBE_CAN_DOZE | \ diff --git a/include/asm-powerpc/mmu-44x.h b/include/asm-powerpc/mmu-44x.h index d5ce7a8dfe9f96..62772ae839ca73 100644 --- a/include/asm-powerpc/mmu-44x.h +++ b/include/asm-powerpc/mmu-44x.h @@ -55,8 +55,6 @@ typedef unsigned long long phys_addr_t; -extern phys_addr_t fixup_bigphys_addr(phys_addr_t, phys_addr_t); - typedef struct { unsigned long id; unsigned long vdso_base; diff --git a/include/asm-powerpc/mmu_context.h b/include/asm-powerpc/mmu_context.h index c0d7795e3d257d..40c9e5a13ff11c 100644 --- a/include/asm-powerpc/mmu_context.h +++ b/include/asm-powerpc/mmu_context.h @@ -8,6 +8,7 @@ #include <linux/kernel.h> #include <linux/mm.h> +#include <linux/sched.h> #include <asm/mmu.h> #include <asm/cputable.h> #include <asm-generic/mm_hooks.h> diff --git a/include/asm-powerpc/mpc8260.h b/include/asm-powerpc/mpc8260.h index f1b83b09ab2ebe..e0d480790e12dd 100644 --- a/include/asm-powerpc/mpc8260.h +++ b/include/asm-powerpc/mpc8260.h @@ -5,8 +5,8 @@ * this one and the configuration switching is done here. */ #ifdef __KERNEL__ -#ifndef __ASM_PPC_MPC8260_H__ -#define __ASM_PPC_MPC8260_H__ +#ifndef __ASM_POWERPC_MPC8260_H__ +#define __ASM_POWERPC_MPC8260_H__ #ifdef CONFIG_8260 @@ -20,5 +20,5 @@ #endif #endif /* CONFIG_8260 */ -#endif /* !__ASM_PPC_MPC8260_H__ */ +#endif /* !__ASM_POWERPC_MPC8260_H__ */ #endif /* __KERNEL__ */ diff --git a/include/asm-powerpc/pgtable-ppc32.h b/include/asm-powerpc/pgtable-ppc32.h index 09662a24f226ef..c863bdb2889c11 100644 --- a/include/asm-powerpc/pgtable-ppc32.h +++ b/include/asm-powerpc/pgtable-ppc32.h @@ -782,23 +782,8 @@ extern void kernel_set_cachemode (unsigned long address, unsigned long size, /* Needs to be defined here and not in linux/mm.h, as it is arch dependent */ #define kern_addr_valid(addr) (1) -#ifdef CONFIG_PHYS_64BIT -extern int remap_pfn_range(struct vm_area_struct *vma, unsigned long from, - unsigned long paddr, unsigned long size, pgprot_t prot); - -static inline int io_remap_pfn_range(struct vm_area_struct *vma, - unsigned long vaddr, - unsigned long pfn, - unsigned long size, - pgprot_t prot) -{ - phys_addr_t paddr64 = fixup_bigphys_addr(pfn << PAGE_SHIFT, size); - return remap_pfn_range(vma, vaddr, paddr64 >> PAGE_SHIFT, size, prot); -} -#else #define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \ remap_pfn_range(vma, vaddr, pfn, size, prot) -#endif /* * No page table caches to initialise diff --git a/include/asm-powerpc/pmac_feature.h b/include/asm-powerpc/pmac_feature.h index d43d91beba9b3e..26bcb0aa164a2a 100644 --- a/include/asm-powerpc/pmac_feature.h +++ b/include/asm-powerpc/pmac_feature.h @@ -28,8 +28,8 @@ */ #ifdef __KERNEL__ -#ifndef __PPC_ASM_PMAC_FEATURE_H -#define __PPC_ASM_PMAC_FEATURE_H +#ifndef __ASM_POWERPC_PMAC_FEATURE_H +#define __ASM_POWERPC_PMAC_FEATURE_H #include <asm/macio.h> #include <asm/machdep.h> @@ -393,5 +393,5 @@ extern u32 __iomem *uninorth_base; #define UN_BIC(r,v) (UN_OUT((r), UN_IN(r) & ~(v))) -#endif /* __PPC_ASM_PMAC_FEATURE_H */ +#endif /* __ASM_POWERPC_PMAC_FEATURE_H */ #endif /* __KERNEL__ */ diff --git a/include/asm-powerpc/systbl.h b/include/asm-powerpc/systbl.h index 3d44446fb74fe6..700ca5928741ad 100644 --- a/include/asm-powerpc/systbl.h +++ b/include/asm-powerpc/systbl.h @@ -308,3 +308,6 @@ COMPAT_SYS_SPU(move_pages) SYSCALL_SPU(getcpu) COMPAT_SYS(epoll_pwait) COMPAT_SYS_SPU(utimensat) +COMPAT_SYS_SPU(signalfd) +COMPAT_SYS_SPU(timerfd) +SYSCALL_SPU(eventfd) diff --git a/include/asm-powerpc/tsi108_irq.h b/include/asm-powerpc/tsi108_irq.h index 3e4d04effa5754..6ed93979fbe4f1 100644 --- a/include/asm-powerpc/tsi108_irq.h +++ b/include/asm-powerpc/tsi108_irq.h @@ -26,8 +26,8 @@ * demultiplexing on TSI108EMU/SVB boards. */ -#ifndef _ASM_PPC_TSI108_IRQ_H -#define _ASM_PPC_TSI108_IRQ_H +#ifndef _ASM_POWERPC_TSI108_IRQ_H +#define _ASM_POWERPC_TSI108_IRQ_H /* * Tsi108 interrupts @@ -121,4 +121,4 @@ typedef enum { TSI108_IRQ_DIRECTED, TSI108_IRQ_DISTRIBUTED, } TSI108_IRQ_MODE; -#endif /* _ASM_PPC_TSI108_IRQ_H */ +#endif /* _ASM_POWERPC_TSI108_IRQ_H */ diff --git a/include/asm-powerpc/tsi108_pci.h b/include/asm-powerpc/tsi108_pci.h index a9f92f73232c8d..5653d7cc3e2404 100644 --- a/include/asm-powerpc/tsi108_pci.h +++ b/include/asm-powerpc/tsi108_pci.h @@ -18,8 +18,8 @@ * MA 02111-1307 USA */ -#ifndef _ASM_PPC_TSI108_PCI_H -#define _ASM_PPC_TSI108_PCI_H +#ifndef _ASM_POWERPC_TSI108_PCI_H +#define _ASM_POWERPC_TSI108_PCI_H #include <asm/tsi108.h> @@ -42,4 +42,4 @@ extern void tsi108_pci_int_init(struct device_node *node); extern void tsi108_irq_cascade(unsigned int irq, struct irq_desc *desc); extern void tsi108_clear_pci_cfg_error(void); -#endif /* _ASM_PPC_TSI108_PCI_H */ +#endif /* _ASM_POWERPC_TSI108_PCI_H */ diff --git a/include/asm-powerpc/unistd.h b/include/asm-powerpc/unistd.h index 21f004aef50842..e3c28dc31abf9a 100644 --- a/include/asm-powerpc/unistd.h +++ b/include/asm-powerpc/unistd.h @@ -1,5 +1,5 @@ -#ifndef _ASM_PPC_UNISTD_H_ -#define _ASM_PPC_UNISTD_H_ +#ifndef _ASM_POWERPC_UNISTD_H_ +#define _ASM_POWERPC_UNISTD_H_ /* * This file contains the system call numbers. @@ -327,10 +327,13 @@ #define __NR_getcpu 302 #define __NR_epoll_pwait 303 #define __NR_utimensat 304 +#define __NR_signalfd 305 +#define __NR_timerfd 306 +#define __NR_eventfd 307 #ifdef __KERNEL__ -#define __NR_syscalls 305 +#define __NR_syscalls 308 #define __NR__exit __NR_exit #define NR_syscalls __NR_syscalls @@ -381,4 +384,4 @@ #endif /* __ASSEMBLY__ */ #endif /* __KERNEL__ */ -#endif /* _ASM_PPC_UNISTD_H_ */ +#endif /* _ASM_POWERPC_UNISTD_H_ */ diff --git a/include/asm-s390/unistd.h b/include/asm-s390/unistd.h index 5c6f00d62df8b3..790c1c557417bb 100644 --- a/include/asm-s390/unistd.h +++ b/include/asm-s390/unistd.h @@ -251,8 +251,12 @@ #define __NR_getcpu 311 #define __NR_epoll_pwait 312 #define __NR_utimes 313 - -#define NR_syscalls 314 +/* Number 314 is reserved for new sys_fallocate */ +#define __NR_utimensat 315 +#define __NR_signalfd 316 +#define __NR_timerfd 317 +#define __NR_eventfd 318 +#define NR_syscalls 319 /* * There are some system calls that are not present on 64 bit, some @@ -346,6 +350,19 @@ #ifdef __KERNEL__ +#ifndef CONFIG_64BIT +#define __IGNORE_select +#else +#define __IGNORE_time +#endif + +/* Ignore NUMA system calls. Not wired up on s390. */ +#define __IGNORE_mbind +#define __IGNORE_get_mempolicy +#define __IGNORE_set_mempolicy +#define __IGNORE_migrate_pages +#define __IGNORE_move_pages + #define __ARCH_WANT_IPC_PARSE_VERSION #define __ARCH_WANT_OLD_READDIR #define __ARCH_WANT_SYS_ALARM diff --git a/include/asm-sh/dreamcast/sysasic.h b/include/asm-sh/dreamcast/sysasic.h index 7874e3dac736b1..f33426608a87e3 100644 --- a/include/asm-sh/dreamcast/sysasic.h +++ b/include/asm-sh/dreamcast/sysasic.h @@ -23,7 +23,7 @@ takes. */ -#define HW_EVENT_IRQ_BASE OFFCHIP_IRQ_BASE /* 48 */ +#define HW_EVENT_IRQ_BASE 48 /* IRQ 13 */ #define HW_EVENT_VSYNC (HW_EVENT_IRQ_BASE + 5) /* VSync */ diff --git a/include/asm-sh/kdebug.h b/include/asm-sh/kdebug.h index 16578b7c9da12c..382cfc7deb732b 100644 --- a/include/asm-sh/kdebug.h +++ b/include/asm-sh/kdebug.h @@ -6,10 +6,6 @@ /* Grossly misnamed. */ enum die_val { DIE_TRAP, - DIE_PAGE_FAULT, }; -int register_page_fault_notifier(struct notifier_block *nb); -int unregister_page_fault_notifier(struct notifier_block *nb); - #endif /* __ASM_SH_KDEBUG_H */ diff --git a/include/asm-sh/landisk/gio.h b/include/asm-sh/landisk/gio.h index 3fce4c451a4691..35d7368b718ad1 100644 --- a/include/asm-sh/landisk/gio.h +++ b/include/asm-sh/landisk/gio.h @@ -29,16 +29,8 @@ #define GIODRV_IOCGGIODATA4 _IOR(GIODRV_IOC_MAGIC, 6, unsigned long *) #define GIODRV_IOCSGIOSETADDR _IOW(GIODRV_IOC_MAGIC, 7, unsigned long *) #define GIODRV_IOCHARDRESET _IO(GIODRV_IOC_MAGIC, 8) /* debugging tool */ - -#define GIODRV_IOCSGIO_LED _IOW(GIODRV_IOC_MAGIC, 9, unsigned long *) -#define GIODRV_IOCGGIO_LED _IOR(GIODRV_IOC_MAGIC, 10, unsigned long *) -#define GIODRV_IOCSGIO_BUZZER _IOW(GIODRV_IOC_MAGIC, 11, unsigned long *) -#define GIODRV_IOCGGIO_LANDISK _IOR(GIODRV_IOC_MAGIC, 14, unsigned long *) -#define GIODRV_IOCGGIO_BTN _IOR(GIODRV_IOC_MAGIC, 22, unsigned long *) -#define GIODRV_IOCSGIO_BTNPID _IOW(GIODRV_IOC_MAGIC, 23, unsigned long *) -#define GIODRV_IOCGGIO_BTNPID _IOR(GIODRV_IOC_MAGIC, 24, unsigned long *) - #define GIODRV_IOC_MAXNR 8 + #define GIO_READ 0x00000000 #define GIO_WRITE 0x00000001 diff --git a/include/asm-sh/landisk/iodata_landisk.h b/include/asm-sh/landisk/iodata_landisk.h index c74d3c73f37720..6fb04ab38b9f22 100644 --- a/include/asm-sh/landisk/iodata_landisk.h +++ b/include/asm-sh/landisk/iodata_landisk.h @@ -22,16 +22,6 @@ /* 2003.10.31 I-O DATA NSD NWG add. for shutdown port clear */ #define PA_PWRINT_CLR 0xb0000006 /* Shutdown Interrupt clear Register */ -#define PA_LCD_CLRDSP 0x00 /* LCD Clear Display Offset */ -#define PA_LCD_RTNHOME 0x00 /* LCD Return Home Offset */ -#define PA_LCD_ENTMODE 0x00 /* LCD Entry Mode Offset */ -#define PA_LCD_DSPCTL 0x00 /* LCD Display ON/OFF Control Offset */ -#define PA_LCD_FUNC 0x00 /* LCD Function Set Offset */ -#define PA_LCD_CGRAM 0x00 /* LCD Set CGRAM Address Offset */ -#define PA_LCD_DDRAM 0x00 /* LCD Set DDRAM Address Offset */ -#define PA_LCD_RDFLAG 0x01 /* LCD Read Busy Flag Offset */ -#define PA_LCD_WTDATA 0x02 /* LCD Write Datat to RAM Offset */ -#define PA_LCD_RDDATA 0x03 /* LCD Read Data from RAM Offset */ #define PA_PIDE_OFFSET 0x40 /* CF IDE Offset */ #define PA_SIDE_OFFSET 0x40 /* HDD IDE Offset */ @@ -45,33 +35,6 @@ #define IRQ_BUTTON 12 /* USL-5P Button IRQ */ #define IRQ_FAULT 13 /* USL-5P Fault IRQ */ -#define SHUTDOWN_BTN_MAJOR 99 /* Shutdown button device major no. */ - -#define SHUTDOWN_LOOP_CNT 5 /* Shutdown button Detection loop */ -#define SHUTDOWN_DELAY 200 /* Shutdown button delay value(ms) */ - - -/* added by kogiidena */ -/* - * landisk_ledparam - * - * led ------10 -6543210 -6543210 -6543210 - * |000000..|0.......|0.......|U.......| - * | HARD |fastblik| blink | on | - * - * led0: power U:update flag - * led1: error - * led2: usb1 - * led3: usb2 - * led4: usb3 - * led5: usb4 - * led6: usb5 - * - */ -extern int landisk_ledparam; /* from setup.c */ -extern int landisk_buzzerparam; /* from setup.c */ -extern int landisk_arch; /* from setup.c */ - #define __IO_PREFIX landisk #include <asm/io_generic.h> diff --git a/include/asm-sh/unistd.h b/include/asm-sh/unistd.h index af71e379a5eea9..77bcb09d6ac8be 100644 --- a/include/asm-sh/unistd.h +++ b/include/asm-sh/unistd.h @@ -329,8 +329,11 @@ #define __NR_getcpu 318 #define __NR_epoll_pwait 319 #define __NR_utimensat 320 +#define __NR_signalfd 321 +#define __NR_timerfd 322 +#define __NR_eventfd 323 -#define NR_syscalls 321 +#define NR_syscalls 324 #ifdef __KERNEL__ diff --git a/include/asm-sparc/atomic.h b/include/asm-sparc/atomic.h index 731fa56e0c374c..bdca5416d8b0a7 100644 --- a/include/asm-sparc/atomic.h +++ b/include/asm-sparc/atomic.h @@ -2,6 +2,7 @@ * * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu) * Copyright (C) 2000 Anton Blanchard (anton@linuxcare.com.au) + * Copyright (C) 2007 Kyle McMartin (kyle@parisc-linux.org) * * Additions by Keith M Wesolowski (wesolows@foobazco.org) based * on asm-parisc/atomic.h Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>. @@ -10,11 +11,48 @@ #ifndef __ARCH_SPARC_ATOMIC__ #define __ARCH_SPARC_ATOMIC__ +#include <linux/types.h> typedef struct { volatile int counter; } atomic_t; #ifdef __KERNEL__ +/* Emulate cmpxchg() the same way we emulate atomics, + * by hashing the object address and indexing into an array + * of spinlocks to get a bit of performance... + * + * See arch/sparc/lib/atomic32.c for implementation. + * + * Cribbed from <asm-parisc/atomic.h> + */ +#define __HAVE_ARCH_CMPXCHG 1 + +/* bug catcher for when unsupported size is used - won't link */ +extern void __cmpxchg_called_with_bad_pointer(void); +/* we only need to support cmpxchg of a u32 on sparc */ +extern unsigned long __cmpxchg_u32(volatile u32 *m, u32 old, u32 new_); + +/* don't worry...optimizer will get rid of most of this */ +static __inline__ unsigned long +__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new_, int size) +{ + switch(size) { + case 4: + return __cmpxchg_u32((u32 *)ptr, (u32)old, (u32)new_); + default: + __cmpxchg_called_with_bad_pointer(); + break; + } + return old; +} + +#define cmpxchg(ptr,o,n) ({ \ + __typeof__(*(ptr)) _o_ = (o); \ + __typeof__(*(ptr)) _n_ = (n); \ + (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_, \ + (unsigned long)_n_, sizeof(*(ptr))); \ +}) + #define ATOMIC_INIT(i) { (i) } extern int __atomic_add_return(int, atomic_t *); diff --git a/include/asm-sparc64/bugs.h b/include/asm-sparc64/bugs.h index 120422fdb02f34..bf39d86c0c9ec6 100644 --- a/include/asm-sparc64/bugs.h +++ b/include/asm-sparc64/bugs.h @@ -1,9 +1,8 @@ -/* $Id: bugs.h,v 1.1 1996/12/26 13:25:20 davem Exp $ - * include/asm-sparc64/bugs.h: Sparc probes for various bugs. +/* bugs.h: Sparc64 probes for various bugs. * - * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu) + * Copyright (C) 1996, 2007 David S. Miller (davem@davemloft.net) */ - +#include <asm/sstate.h> extern unsigned long loops_per_jiffy; @@ -12,4 +11,5 @@ static void __init check_bugs(void) #ifndef CONFIG_SMP cpu_data(0).udelay_val = loops_per_jiffy; #endif + sstate_running(); } diff --git a/include/asm-sparc64/cpudata.h b/include/asm-sparc64/cpudata.h index e89922d6718c69..03c385de7619e5 100644 --- a/include/asm-sparc64/cpudata.h +++ b/include/asm-sparc64/cpudata.h @@ -17,11 +17,11 @@ typedef struct { /* Dcache line 1 */ unsigned int __softirq_pending; /* must be 1st, see rtrap.S */ - unsigned int __pad0_1; - unsigned int __pad0_2; - unsigned int __pad1; + unsigned int __pad0; unsigned long clock_tick; /* %tick's per second */ unsigned long udelay_val; + unsigned int __pad1; + unsigned int __pad2; /* Dcache line 2, rarely used */ unsigned int dcache_size; @@ -30,8 +30,8 @@ typedef struct { unsigned int icache_line_size; unsigned int ecache_size; unsigned int ecache_line_size; + int core_id; unsigned int __pad3; - unsigned int __pad4; } cpuinfo_sparc; DECLARE_PER_CPU(cpuinfo_sparc, __cpu_data); @@ -76,12 +76,18 @@ struct trap_per_cpu { /* Dcache line 8: IRQ work list, and keep trap_block a power-of-2 in size. */ unsigned int irq_worklist; - unsigned int __pad1; - unsigned long __pad2[3]; + unsigned int cpu_mondo_qmask; + unsigned int dev_mondo_qmask; + unsigned int resum_qmask; + unsigned int nonresum_qmask; + unsigned int __pad2[3]; } __attribute__((aligned(64))); extern struct trap_per_cpu trap_block[NR_CPUS]; extern void init_cur_cpu_trap(struct thread_info *); extern void setup_tba(void); +extern int ncpus_probed; + +extern unsigned long real_hard_smp_processor_id(void); struct cpuid_patch_entry { unsigned int addr; @@ -122,6 +128,10 @@ extern struct sun4v_2insn_patch_entry __sun4v_2insn_patch, #define TRAP_PER_CPU_TSB_HUGE 0xd0 #define TRAP_PER_CPU_TSB_HUGE_TEMP 0xd8 #define TRAP_PER_CPU_IRQ_WORKLIST 0xe0 +#define TRAP_PER_CPU_CPU_MONDO_QMASK 0xe4 +#define TRAP_PER_CPU_DEV_MONDO_QMASK 0xe8 +#define TRAP_PER_CPU_RESUM_QMASK 0xec +#define TRAP_PER_CPU_NONRESUM_QMASK 0xf0 #define TRAP_BLOCK_SZ_SHIFT 8 @@ -192,7 +202,7 @@ extern struct sun4v_2insn_patch_entry __sun4v_2insn_patch, * the calculations done by the macro mid-stream. */ #define LOAD_PER_CPU_BASE(DEST, THR, REG1, REG2, REG3) \ - ldub [THR + TI_CPU], REG1; \ + lduh [THR + TI_CPU], REG1; \ sethi %hi(__per_cpu_shift), REG3; \ sethi %hi(__per_cpu_base), REG2; \ ldx [REG3 + %lo(__per_cpu_shift)], REG3; \ diff --git a/include/asm-sparc64/hypervisor.h b/include/asm-sparc64/hypervisor.h index 612bf319753fe0..5cdb1ff0483826 100644 --- a/include/asm-sparc64/hypervisor.h +++ b/include/asm-sparc64/hypervisor.h @@ -73,6 +73,8 @@ #define HV_ENOTSUPPORTED 13 /* Function not supported */ #define HV_ENOMAP 14 /* No mapping found */ #define HV_ETOOMANY 15 /* Too many items specified */ +#define HV_ECHANNEL 16 /* Invalid LDC channel */ +#define HV_EBUSY 17 /* Resource busy */ /* mach_exit() * TRAP: HV_FAST_TRAP @@ -95,6 +97,10 @@ */ #define HV_FAST_MACH_EXIT 0x00 +#ifndef __ASSEMBLY__ +extern void sun4v_mach_exit(unsigned long exit_core); +#endif + /* Domain services. */ /* mach_desc() @@ -120,7 +126,13 @@ */ #define HV_FAST_MACH_DESC 0x01 -/* mach_exit() +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_mach_desc(unsigned long buffer_pa, + unsigned long buf_len, + unsigned long *real_buf_len); +#endif + +/* mach_sir() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_MACH_SIR * ERRORS: This service does not return. @@ -135,53 +147,66 @@ */ #define HV_FAST_MACH_SIR 0x02 -/* mach_set_soft_state() +#ifndef __ASSEMBLY__ +extern void sun4v_mach_sir(void); +#endif + +/* mach_set_watchdog() * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_MACH_SET_SOFT_STATE - * ARG0: software state - * ARG1: software state description pointer + * FUNCTION: HV_FAST_MACH_SET_WATCHDOG + * ARG0: timeout in milliseconds * RET0: status - * ERRORS: EINVAL software state not valid or software state - * description is not NULL terminated - * ENORADDR software state description pointer is not a - * valid real address - * EBADALIGNED software state description is not correctly - * aligned + * RET1: time remaining in milliseconds * - * This allows the guest to report it's soft state to the hypervisor. There - * are two primary components to this state. The first part states whether - * the guest software is running or not. The second containts optional - * details specific to the software. + * A guest uses this API to set a watchdog timer. Once the gues has set + * the timer, it must call the timer service again either to disable or + * postpone the expiration. If the timer expires before being reset or + * disabled, then the hypervisor take a platform specific action leading + * to guest termination within a bounded time period. The platform action + * may include recovery actions such as reporting the expiration to a + * Service Processor, and/or automatically restarting the gues. * - * The software state argument is defined below in HV_SOFT_STATE_*, and - * indicates whether the guest is operating normally or in a transitional - * state. + * The 'timeout' parameter is specified in milliseconds, however the + * implementated granularity is given by the 'watchdog-resolution' + * property in the 'platform' node of the guest's machine description. + * The largest allowed timeout value is specified by the + * 'watchdog-max-timeout' property of the 'platform' node. * - * The software state description argument is a real address of a data buffer - * of size 32-bytes aligned on a 32-byte boundary. It is treated as a NULL - * terminated 7-bit ASCII string of up to 31 characters not including the - * NULL termination. - */ -#define HV_FAST_MACH_SET_SOFT_STATE 0x03 -#define HV_SOFT_STATE_NORMAL 0x01 -#define HV_SOFT_STATE_TRANSITION 0x02 - -/* mach_get_soft_state() - * TRAP: HV_FAST_TRAP - * FUNCTION: HV_FAST_MACH_GET_SOFT_STATE - * ARG0: software state description pointer - * RET0: status - * RET1: software state - * ERRORS: ENORADDR software state description pointer is not a - * valid real address - * EBADALIGNED software state description is not correctly - * aligned + * If the 'timeout' argument is not zero, the watchdog timer is set to + * expire after a minimum of 'timeout' milliseconds. * - * Retrieve the current value of the guest's software state. The rules - * for the software state pointer are the same as for mach_set_soft_state() - * above. + * If the 'timeout' argument is zero, the watchdog timer is disabled. + * + * If the 'timeout' value exceeds the value of the 'max-watchdog-timeout' + * property, the hypervisor leaves the watchdog timer state unchanged, + * and returns a status of EINVAL. + * + * The 'time remaining' return value is valid regardless of whether the + * return status is EOK or EINVAL. A non-zero return value indicates the + * number of milliseconds that were remaining until the timer was to expire. + * If less than one millisecond remains, the return value is '1'. If the + * watchdog timer was disabled at the time of the call, the return value is + * zero. + * + * If the hypervisor cannot support the exact timeout value requested, but + * can support a larger timeout value, the hypervisor may round the actual + * timeout to a value larger than the requested timeout, consequently the + * 'time remaining' return value may be larger than the previously requested + * timeout value. + * + * Any guest OS debugger should be aware that the watchdog service may be in + * use. Consequently, it is recommended that the watchdog service is + * disabled upon debugger entry (e.g. reaching a breakpoint), and then + * re-enabled upon returning to normal execution. The API has been designed + * with this in mind, and the 'time remaining' result of the disable call may + * be used directly as the timeout argument of the re-enable call. */ -#define HV_FAST_MACH_GET_SOFT_STATE 0x04 +#define HV_FAST_MACH_SET_WATCHDOG 0x05 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_mach_set_watchdog(unsigned long timeout, + unsigned long *orig_timeout); +#endif /* CPU services. * @@ -206,8 +231,8 @@ * FUNCTION: HV_FAST_CPU_START * ARG0: CPU ID * ARG1: PC - * ARG1: RTBA - * ARG1: target ARG0 + * ARG2: RTBA + * ARG3: target ARG0 * RET0: status * ERRORS: ENOCPU Invalid CPU ID * EINVAL Target CPU ID is not in the stopped state @@ -224,6 +249,13 @@ */ #define HV_FAST_CPU_START 0x10 +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_cpu_start(unsigned long cpuid, + unsigned long pc, + unsigned long rtba, + unsigned long arg0); +#endif + /* cpu_stop() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_CPU_STOP @@ -245,6 +277,10 @@ */ #define HV_FAST_CPU_STOP 0x11 +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_cpu_stop(unsigned long cpuid); +#endif + /* cpu_yield() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_CPU_YIELD @@ -588,6 +624,11 @@ struct hv_fault_status { */ #define HV_FAST_MMU_TSB_CTX0 0x20 +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_mmu_tsb_ctx0(unsigned long num_descriptions, + unsigned long tsb_desc_ra); +#endif + /* mmu_tsb_ctxnon0() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_MMU_TSB_CTXNON0 @@ -694,6 +735,13 @@ struct hv_fault_status { */ #define HV_FAST_MMU_MAP_PERM_ADDR 0x25 +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_mmu_map_perm_addr(unsigned long vaddr, + unsigned long set_to_zero, + unsigned long tte, + unsigned long flags); +#endif + /* mmu_fault_area_conf() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_MMU_FAULT_AREA_CONF @@ -892,6 +940,10 @@ struct hv_fault_status { */ #define HV_FAST_TOD_GET 0x50 +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_tod_get(unsigned long *time); +#endif + /* tod_set() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_TOD_SET @@ -905,6 +957,10 @@ struct hv_fault_status { */ #define HV_FAST_TOD_SET 0x51 +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_tod_set(unsigned long time); +#endif + /* Console services */ /* con_getchar() @@ -940,6 +996,107 @@ struct hv_fault_status { */ #define HV_FAST_CONS_PUTCHAR 0x61 +/* con_read() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_CONS_READ + * ARG0: buffer real address + * ARG1: buffer size in bytes + * RET0: status + * RET1: bytes read or BREAK or HUP + * ERRORS: EWOULDBLOCK No character available. + * + * Reads characters into a buffer from the console device. If no + * character is available then an EWOULDBLOCK error is returned. + * If a character is available, then the returned status is EOK + * and the number of bytes read into the given buffer is provided + * in RET1. + * + * A virtual BREAK is represented by the 64-bit RET1 value -1. + * + * A virtual HUP signal is represented by the 64-bit RET1 value -2. + * + * If BREAK or HUP are indicated, no bytes were read into buffer. + */ +#define HV_FAST_CONS_READ 0x62 + +/* con_write() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_CONS_WRITE + * ARG0: buffer real address + * ARG1: buffer size in bytes + * RET0: status + * RET1: bytes written + * ERRORS: EWOULDBLOCK Output buffer currently full, would block + * + * Send a characters in buffer to the console device. Breaks must be + * sent using con_putchar(). + */ +#define HV_FAST_CONS_WRITE 0x63 + +#ifndef __ASSEMBLY__ +extern long sun4v_con_getchar(long *status); +extern long sun4v_con_putchar(long c); +extern long sun4v_con_read(unsigned long buffer, + unsigned long size, + unsigned long *bytes_read); +extern unsigned long sun4v_con_write(unsigned long buffer, + unsigned long size, + unsigned long *bytes_written); +#endif + +/* mach_set_soft_state() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MACH_SET_SOFT_STATE + * ARG0: software state + * ARG1: software state description pointer + * RET0: status + * ERRORS: EINVAL software state not valid or software state + * description is not NULL terminated + * ENORADDR software state description pointer is not a + * valid real address + * EBADALIGNED software state description is not correctly + * aligned + * + * This allows the guest to report it's soft state to the hypervisor. There + * are two primary components to this state. The first part states whether + * the guest software is running or not. The second containts optional + * details specific to the software. + * + * The software state argument is defined below in HV_SOFT_STATE_*, and + * indicates whether the guest is operating normally or in a transitional + * state. + * + * The software state description argument is a real address of a data buffer + * of size 32-bytes aligned on a 32-byte boundary. It is treated as a NULL + * terminated 7-bit ASCII string of up to 31 characters not including the + * NULL termination. + */ +#define HV_FAST_MACH_SET_SOFT_STATE 0x70 +#define HV_SOFT_STATE_NORMAL 0x01 +#define HV_SOFT_STATE_TRANSITION 0x02 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_mach_set_soft_state(unsigned long soft_state, + unsigned long msg_string_ra); +#endif + +/* mach_get_soft_state() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MACH_GET_SOFT_STATE + * ARG0: software state description pointer + * RET0: status + * RET1: software state + * ERRORS: ENORADDR software state description pointer is not a + * valid real address + * EBADALIGNED software state description is not correctly + * aligned + * + * Retrieve the current value of the guest's software state. The rules + * for the software state pointer are the same as for mach_set_soft_state() + * above. + */ +#define HV_FAST_MACH_GET_SOFT_STATE 0x71 + /* Trap trace services. * * The hypervisor provides a trap tracing capability for privileged @@ -1331,6 +1488,113 @@ extern unsigned long sun4v_intr_gettarget(unsigned long sysino); extern unsigned long sun4v_intr_settarget(unsigned long sysino, unsigned long cpuid); #endif +/* vintr_get_cookie() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_VINTR_GET_COOKIE + * ARG0: device handle + * ARG1: device ino + * RET0: status + * RET1: cookie + */ +#define HV_FAST_VINTR_GET_COOKIE 0xa7 + +/* vintr_set_cookie() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_VINTR_SET_COOKIE + * ARG0: device handle + * ARG1: device ino + * ARG2: cookie + * RET0: status + */ +#define HV_FAST_VINTR_SET_COOKIE 0xa8 + +/* vintr_get_valid() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_VINTR_GET_VALID + * ARG0: device handle + * ARG1: device ino + * RET0: status + * RET1: valid state + */ +#define HV_FAST_VINTR_GET_VALID 0xa9 + +/* vintr_set_valid() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_VINTR_SET_VALID + * ARG0: device handle + * ARG1: device ino + * ARG2: valid state + * RET0: status + */ +#define HV_FAST_VINTR_SET_VALID 0xaa + +/* vintr_get_state() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_VINTR_GET_STATE + * ARG0: device handle + * ARG1: device ino + * RET0: status + * RET1: state + */ +#define HV_FAST_VINTR_GET_STATE 0xab + +/* vintr_set_state() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_VINTR_SET_STATE + * ARG0: device handle + * ARG1: device ino + * ARG2: state + * RET0: status + */ +#define HV_FAST_VINTR_SET_STATE 0xac + +/* vintr_get_target() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_VINTR_GET_TARGET + * ARG0: device handle + * ARG1: device ino + * RET0: status + * RET1: cpuid + */ +#define HV_FAST_VINTR_GET_TARGET 0xad + +/* vintr_set_target() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_VINTR_SET_TARGET + * ARG0: device handle + * ARG1: device ino + * ARG2: cpuid + * RET0: status + */ +#define HV_FAST_VINTR_SET_TARGET 0xae + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_vintr_get_cookie(unsigned long dev_handle, + unsigned long dev_ino, + unsigned long *cookie); +extern unsigned long sun4v_vintr_set_cookie(unsigned long dev_handle, + unsigned long dev_ino, + unsigned long cookie); +extern unsigned long sun4v_vintr_get_valid(unsigned long dev_handle, + unsigned long dev_ino, + unsigned long *valid); +extern unsigned long sun4v_vintr_set_valid(unsigned long dev_handle, + unsigned long dev_ino, + unsigned long valid); +extern unsigned long sun4v_vintr_get_state(unsigned long dev_handle, + unsigned long dev_ino, + unsigned long *state); +extern unsigned long sun4v_vintr_set_state(unsigned long dev_handle, + unsigned long dev_ino, + unsigned long state); +extern unsigned long sun4v_vintr_get_target(unsigned long dev_handle, + unsigned long dev_ino, + unsigned long *cpuid); +extern unsigned long sun4v_vintr_set_target(unsigned long dev_handle, + unsigned long dev_ino, + unsigned long cpuid); +#endif + /* PCI IO services. * * See the terminology descriptions in the device interrupt services @@ -1989,6 +2253,346 @@ extern unsigned long sun4v_intr_settarget(unsigned long sysino, unsigned long cp */ #define HV_FAST_PCI_MSG_SETVALID 0xd3 +/* Logical Domain Channel services. */ + +#define LDC_CHANNEL_DOWN 0 +#define LDC_CHANNEL_UP 1 +#define LDC_CHANNEL_RESETTING 2 + +/* ldc_tx_qconf() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_LDC_TX_QCONF + * ARG0: channel ID + * ARG1: real address base of queue + * ARG2: num entries in queue + * RET0: status + * + * Configure transmit queue for the LDC endpoint specified by the + * given channel ID, to be placed at the given real address, and + * be of the given num entries. Num entries must be a power of two. + * The real address base of the queue must be aligned on the queue + * size. Each queue entry is 64-bytes, so for example, a 32 entry + * queue must be aligned on a 2048 byte real address boundary. + * + * Upon configuration of a valid transmit queue the head and tail + * pointers are set to a hypervisor specific identical value indicating + * that the queue initially is empty. + * + * The endpoint's transmit queue is un-configured if num entries is zero. + * + * The maximum number of entries for each queue for a specific cpu may be + * determined from the machine description. A transmit queue may be + * specified even in the event that the LDC is down (peer endpoint has no + * receive queue specified). Transmission will begin as soon as the peer + * endpoint defines a receive queue. + * + * It is recommended that a guest wait for a transmit queue to empty prior + * to reconfiguring it, or un-configuring it. Re or un-configuring of a + * non-empty transmit queue behaves exactly as defined above, however it + * is undefined as to how many of the pending entries in the original queue + * will be delivered prior to the re-configuration taking effect. + * Furthermore, as the queue configuration causes a reset of the head and + * tail pointers there is no way for a guest to determine how many entries + * have been sent after the configuration operation. + */ +#define HV_FAST_LDC_TX_QCONF 0xe0 + +/* ldc_tx_qinfo() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_LDC_TX_QINFO + * ARG0: channel ID + * RET0: status + * RET1: real address base of queue + * RET2: num entries in queue + * + * Return the configuration info for the transmit queue of LDC endpoint + * defined by the given channel ID. The real address is the currently + * defined real address base of the defined queue, and num entries is the + * size of the queue in terms of number of entries. + * + * If the specified channel ID is a valid endpoint number, but no transmit + * queue has been defined this service will return success, but with num + * entries set to zero and the real address will have an undefined value. + */ +#define HV_FAST_LDC_TX_QINFO 0xe1 + +/* ldc_tx_get_state() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_LDC_TX_GET_STATE + * ARG0: channel ID + * RET0: status + * RET1: head offset + * RET2: tail offset + * RET3: channel state + * + * Return the transmit state, and the head and tail queue pointers, for + * the transmit queue of the LDC endpoint defined by the given channel ID. + * The head and tail values are the byte offset of the head and tail + * positions of the transmit queue for the specified endpoint. + */ +#define HV_FAST_LDC_TX_GET_STATE 0xe2 + +/* ldc_tx_set_qtail() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_LDC_TX_SET_QTAIL + * ARG0: channel ID + * ARG1: tail offset + * RET0: status + * + * Update the tail pointer for the transmit queue associated with the LDC + * endpoint defined by the given channel ID. The tail offset specified + * must be aligned on a 64 byte boundary, and calculated so as to increase + * the number of pending entries on the transmit queue. Any attempt to + * decrease the number of pending transmit queue entires is considered + * an invalid tail offset and will result in an EINVAL error. + * + * Since the tail of the transmit queue may not be moved backwards, the + * transmit queue may be flushed by configuring a new transmit queue, + * whereupon the hypervisor will configure the initial transmit head and + * tail pointers to be equal. + */ +#define HV_FAST_LDC_TX_SET_QTAIL 0xe3 + +/* ldc_rx_qconf() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_LDC_RX_QCONF + * ARG0: channel ID + * ARG1: real address base of queue + * ARG2: num entries in queue + * RET0: status + * + * Configure receive queue for the LDC endpoint specified by the + * given channel ID, to be placed at the given real address, and + * be of the given num entries. Num entries must be a power of two. + * The real address base of the queue must be aligned on the queue + * size. Each queue entry is 64-bytes, so for example, a 32 entry + * queue must be aligned on a 2048 byte real address boundary. + * + * The endpoint's transmit queue is un-configured if num entries is zero. + * + * If a valid receive queue is specified for a local endpoint the LDC is + * in the up state for the purpose of transmission to this endpoint. + * + * The maximum number of entries for each queue for a specific cpu may be + * determined from the machine description. + * + * As receive queue configuration causes a reset of the queue's head and + * tail pointers there is no way for a gues to determine how many entries + * have been received between a preceeding ldc_get_rx_state() API call + * and the completion of the configuration operation. It should be noted + * that datagram delivery is not guarenteed via domain channels anyway, + * and therefore any higher protocol should be resilient to datagram + * loss if necessary. However, to overcome this specific race potential + * it is recommended, for example, that a higher level protocol be employed + * to ensure either retransmission, or ensure that no datagrams are pending + * on the peer endpoint's transmit queue prior to the configuration process. + */ +#define HV_FAST_LDC_RX_QCONF 0xe4 + +/* ldc_rx_qinfo() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_LDC_RX_QINFO + * ARG0: channel ID + * RET0: status + * RET1: real address base of queue + * RET2: num entries in queue + * + * Return the configuration info for the receive queue of LDC endpoint + * defined by the given channel ID. The real address is the currently + * defined real address base of the defined queue, and num entries is the + * size of the queue in terms of number of entries. + * + * If the specified channel ID is a valid endpoint number, but no receive + * queue has been defined this service will return success, but with num + * entries set to zero and the real address will have an undefined value. + */ +#define HV_FAST_LDC_RX_QINFO 0xe5 + +/* ldc_rx_get_state() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_LDC_RX_GET_STATE + * ARG0: channel ID + * RET0: status + * RET1: head offset + * RET2: tail offset + * RET3: channel state + * + * Return the receive state, and the head and tail queue pointers, for + * the receive queue of the LDC endpoint defined by the given channel ID. + * The head and tail values are the byte offset of the head and tail + * positions of the receive queue for the specified endpoint. + */ +#define HV_FAST_LDC_RX_GET_STATE 0xe6 + +/* ldc_rx_set_qhead() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_LDC_RX_SET_QHEAD + * ARG0: channel ID + * ARG1: head offset + * RET0: status + * + * Update the head pointer for the receive queue associated with the LDC + * endpoint defined by the given channel ID. The head offset specified + * must be aligned on a 64 byte boundary, and calculated so as to decrease + * the number of pending entries on the receive queue. Any attempt to + * increase the number of pending receive queue entires is considered + * an invalid head offset and will result in an EINVAL error. + * + * The receive queue may be flushed by setting the head offset equal + * to the current tail offset. + */ +#define HV_FAST_LDC_RX_SET_QHEAD 0xe7 + +/* LDC Map Table Entry. Each slot is defined by a translation table + * entry, as specified by the LDC_MTE_* bits below, and a 64-bit + * hypervisor invalidation cookie. + */ +#define LDC_MTE_PADDR 0x0fffffffffffe000 /* pa[55:13] */ +#define LDC_MTE_COPY_W 0x0000000000000400 /* copy write access */ +#define LDC_MTE_COPY_R 0x0000000000000200 /* copy read access */ +#define LDC_MTE_IOMMU_W 0x0000000000000100 /* IOMMU write access */ +#define LDC_MTE_IOMMU_R 0x0000000000000080 /* IOMMU read access */ +#define LDC_MTE_EXEC 0x0000000000000040 /* execute */ +#define LDC_MTE_WRITE 0x0000000000000020 /* read */ +#define LDC_MTE_READ 0x0000000000000010 /* write */ +#define LDC_MTE_SZALL 0x000000000000000f /* page size bits */ +#define LDC_MTE_SZ16GB 0x0000000000000007 /* 16GB page */ +#define LDC_MTE_SZ2GB 0x0000000000000006 /* 2GB page */ +#define LDC_MTE_SZ256MB 0x0000000000000005 /* 256MB page */ +#define LDC_MTE_SZ32MB 0x0000000000000004 /* 32MB page */ +#define LDC_MTE_SZ4MB 0x0000000000000003 /* 4MB page */ +#define LDC_MTE_SZ512K 0x0000000000000002 /* 512K page */ +#define LDC_MTE_SZ64K 0x0000000000000001 /* 64K page */ +#define LDC_MTE_SZ8K 0x0000000000000000 /* 8K page */ + +#ifndef __ASSEMBLY__ +struct ldc_mtable_entry { + unsigned long mte; + unsigned long cookie; +}; +#endif + +/* ldc_set_map_table() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_LDC_SET_MAP_TABLE + * ARG0: channel ID + * ARG1: table real address + * ARG2: num entries + * RET0: status + * + * Register the MTE table at the given table real address, with the + * specified num entries, for the LDC indicated by the given channel + * ID. + */ +#define HV_FAST_LDC_SET_MAP_TABLE 0xea + +/* ldc_get_map_table() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_LDC_GET_MAP_TABLE + * ARG0: channel ID + * RET0: status + * RET1: table real address + * RET2: num entries + * + * Return the configuration of the current mapping table registered + * for the given channel ID. + */ +#define HV_FAST_LDC_GET_MAP_TABLE 0xeb + +#define LDC_COPY_IN 0 +#define LDC_COPY_OUT 1 + +/* ldc_copy() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_LDC_COPY + * ARG0: channel ID + * ARG1: LDC_COPY_* direction code + * ARG2: target real address + * ARG3: local real address + * ARG4: length in bytes + * RET0: status + * RET1: actual length in bytes + */ +#define HV_FAST_LDC_COPY 0xec + +#define LDC_MEM_READ 1 +#define LDC_MEM_WRITE 2 +#define LDC_MEM_EXEC 4 + +/* ldc_mapin() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_LDC_MAPIN + * ARG0: channel ID + * ARG1: cookie + * RET0: status + * RET1: real address + * RET2: LDC_MEM_* permissions + */ +#define HV_FAST_LDC_MAPIN 0xed + +/* ldc_unmap() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_LDC_UNMAP + * ARG0: real address + * RET0: status + */ +#define HV_FAST_LDC_UNMAP 0xee + +/* ldc_revoke() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_LDC_REVOKE + * ARG0: cookie + * ARG1: ldc_mtable_entry cookie + * RET0: status + */ +#define HV_FAST_LDC_REVOKE 0xef + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_ldc_tx_qconf(unsigned long channel, + unsigned long ra, + unsigned long num_entries); +extern unsigned long sun4v_ldc_tx_qinfo(unsigned long channel, + unsigned long *ra, + unsigned long *num_entries); +extern unsigned long sun4v_ldc_tx_get_state(unsigned long channel, + unsigned long *head_off, + unsigned long *tail_off, + unsigned long *chan_state); +extern unsigned long sun4v_ldc_tx_set_qtail(unsigned long channel, + unsigned long tail_off); +extern unsigned long sun4v_ldc_rx_qconf(unsigned long channel, + unsigned long ra, + unsigned long num_entries); +extern unsigned long sun4v_ldc_rx_qinfo(unsigned long channel, + unsigned long *ra, + unsigned long *num_entries); +extern unsigned long sun4v_ldc_rx_get_state(unsigned long channel, + unsigned long *head_off, + unsigned long *tail_off, + unsigned long *chan_state); +extern unsigned long sun4v_ldc_rx_set_qhead(unsigned long channel, + unsigned long head_off); +extern unsigned long sun4v_ldc_set_map_table(unsigned long channel, + unsigned long ra, + unsigned long num_entries); +extern unsigned long sun4v_ldc_get_map_table(unsigned long channel, + unsigned long *ra, + unsigned long *num_entries); +extern unsigned long sun4v_ldc_copy(unsigned long channel, + unsigned long dir_code, + unsigned long tgt_raddr, + unsigned long lcl_raddr, + unsigned long len, + unsigned long *actual_len); +extern unsigned long sun4v_ldc_mapin(unsigned long channel, + unsigned long cookie, + unsigned long *ra, + unsigned long *perm); +extern unsigned long sun4v_ldc_unmap(unsigned long ra); +extern unsigned long sun4v_ldc_revoke(unsigned long cookie, + unsigned long mte_cookie); +#endif + /* Performance counter services. */ #define HV_PERF_JBUS_PERF_CTRL_REG 0x00 @@ -2121,8 +2725,42 @@ struct hv_mmu_statistics { #define HV_FAST_MMUSTAT_INFO 0x103 /* Function numbers for HV_CORE_TRAP. */ -#define HV_CORE_VER 0x00 +#define HV_CORE_SET_VER 0x00 #define HV_CORE_PUTCHAR 0x01 #define HV_CORE_EXIT 0x02 +#define HV_CORE_GET_VER 0x03 + +/* Hypervisor API groups for use with HV_CORE_SET_VER and + * HV_CORE_GET_VER. + */ +#define HV_GRP_SUN4V 0x0000 +#define HV_GRP_CORE 0x0001 +#define HV_GRP_INTR 0x0002 +#define HV_GRP_SOFT_STATE 0x0003 +#define HV_GRP_PCI 0x0100 +#define HV_GRP_LDOM 0x0101 +#define HV_GRP_SVC_CHAN 0x0102 +#define HV_GRP_NCS 0x0103 +#define HV_GRP_NIAG_PERF 0x0200 +#define HV_GRP_FIRE_PERF 0x0201 +#define HV_GRP_DIAG 0x0300 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_get_version(unsigned long group, + unsigned long *major, + unsigned long *minor); +extern unsigned long sun4v_set_version(unsigned long group, + unsigned long major, + unsigned long minor, + unsigned long *actual_minor); + +extern int sun4v_hvapi_register(unsigned long group, unsigned long major, + unsigned long *minor); +extern void sun4v_hvapi_unregister(unsigned long group); +extern int sun4v_hvapi_get(unsigned long group, + unsigned long *major, + unsigned long *minor); +extern void sun4v_hvapi_init(void); +#endif #endif /* !(_SPARC64_HYPERVISOR_H) */ diff --git a/include/asm-sparc64/kdebug.h b/include/asm-sparc64/kdebug.h index 627e3396a5f0c1..9974c7b0aebc18 100644 --- a/include/asm-sparc64/kdebug.h +++ b/include/asm-sparc64/kdebug.h @@ -32,7 +32,6 @@ enum die_val { DIE_TRAP, DIE_TRAP_TL1, DIE_CALL, - DIE_PAGE_FAULT, }; #endif diff --git a/include/asm-sparc64/mdesc.h b/include/asm-sparc64/mdesc.h new file mode 100644 index 00000000000000..124eb8ca237898 --- /dev/null +++ b/include/asm-sparc64/mdesc.h @@ -0,0 +1,39 @@ +#ifndef _SPARC64_MDESC_H +#define _SPARC64_MDESC_H + +#include <linux/types.h> +#include <asm/prom.h> + +struct mdesc_node; +struct mdesc_arc { + const char *name; + struct mdesc_node *arc; +}; + +struct mdesc_node { + const char *name; + u64 node; + unsigned int unique_id; + unsigned int num_arcs; + struct property *properties; + struct mdesc_node *hash_next; + struct mdesc_node *allnodes_next; + struct mdesc_arc arcs[0]; +}; + +extern struct mdesc_node *md_find_node_by_name(struct mdesc_node *from, + const char *name); +#define md_for_each_node_by_name(__mn, __name) \ + for (__mn = md_find_node_by_name(NULL, __name); __mn; \ + __mn = md_find_node_by_name(__mn, __name)) + +extern struct property *md_find_property(const struct mdesc_node *mp, + const char *name, + int *lenp); +extern const void *md_get_property(const struct mdesc_node *mp, + const char *name, + int *lenp); + +extern void sun4v_mdesc_init(void); + +#endif diff --git a/include/asm-sparc64/oplib.h b/include/asm-sparc64/oplib.h index 6a0da3b1695c0c..992f9f7a476cef 100644 --- a/include/asm-sparc64/oplib.h +++ b/include/asm-sparc64/oplib.h @@ -316,11 +316,8 @@ extern int prom_setprop(int node, const char *prop_name, char *prop_value, extern int prom_pathtoinode(const char *path); extern int prom_inst2pkg(int); - -/* CPU probing helpers. */ -struct device_node; -int cpu_find_by_instance(int instance, struct device_node **dev_node, int *mid); -int cpu_find_by_mid(int mid, struct device_node **prom_node); +extern int prom_service_exists(const char *service_name); +extern void prom_sun4v_guest_soft_state(void); /* Client interface level routines. */ extern void prom_set_trap_table(unsigned long tba); diff --git a/include/asm-sparc64/percpu.h b/include/asm-sparc64/percpu.h index ced8cbde046dab..88db872ce2f8ae 100644 --- a/include/asm-sparc64/percpu.h +++ b/include/asm-sparc64/percpu.h @@ -5,7 +5,8 @@ #ifdef CONFIG_SMP -extern void setup_per_cpu_areas(void); +#define setup_per_cpu_areas() do { } while (0) +extern void real_setup_per_cpu_areas(void); extern unsigned long __per_cpu_base; extern unsigned long __per_cpu_shift; @@ -34,6 +35,7 @@ do { \ } while (0) #else /* ! SMP */ +#define real_setup_per_cpu_areas() do { } while (0) #define DEFINE_PER_CPU(type, name) \ __typeof__(type) per_cpu__##name diff --git a/include/asm-sparc64/prom.h b/include/asm-sparc64/prom.h index ddad5f99ac7f08..b4df3042add06f 100644 --- a/include/asm-sparc64/prom.h +++ b/include/asm-sparc64/prom.h @@ -90,6 +90,7 @@ extern struct device_node *of_find_compatible_node(struct device_node *from, const char *type, const char *compat); extern struct device_node *of_find_node_by_path(const char *path); extern struct device_node *of_find_node_by_phandle(phandle handle); +extern struct device_node *of_find_node_by_cpuid(int cpuid); extern struct device_node *of_get_parent(const struct device_node *node); extern struct device_node *of_get_next_child(const struct device_node *node, struct device_node *prev); diff --git a/include/asm-sparc64/smp.h b/include/asm-sparc64/smp.h index 869d16fb907bb1..f76e1492add5f3 100644 --- a/include/asm-sparc64/smp.h +++ b/include/asm-sparc64/smp.h @@ -41,7 +41,7 @@ extern cpumask_t cpu_sibling_map[NR_CPUS]; extern int hard_smp_processor_id(void); #define raw_smp_processor_id() (current_thread_info()->cpu) -extern void smp_setup_cpu_possible_map(void); +extern void smp_fill_in_sib_core_maps(void); extern unsigned char boot_cpu_id; #endif /* !(__ASSEMBLY__) */ @@ -49,7 +49,7 @@ extern unsigned char boot_cpu_id; #else #define hard_smp_processor_id() 0 -#define smp_setup_cpu_possible_map() do { } while (0) +#define smp_fill_in_sib_core_maps() do { } while (0) #define boot_cpu_id (0) #endif /* !(CONFIG_SMP) */ diff --git a/include/asm-sparc64/sstate.h b/include/asm-sparc64/sstate.h new file mode 100644 index 00000000000000..a7c35dbcb2814d --- /dev/null +++ b/include/asm-sparc64/sstate.h @@ -0,0 +1,13 @@ +#ifndef _SPARC64_SSTATE_H +#define _SPARC64_SSTATE_H + +extern void sstate_booting(void); +extern void sstate_running(void); +extern void sstate_halt(void); +extern void sstate_poweroff(void); +extern void sstate_panic(void); +extern void sstate_reboot(void); + +extern void sun4v_sstate_init(void); + +#endif /* _SPARC64_SSTATE_H */ diff --git a/include/asm-sparc64/thread_info.h b/include/asm-sparc64/thread_info.h index 2ebf7f27bf918c..98252cd44dd6db 100644 --- a/include/asm-sparc64/thread_info.h +++ b/include/asm-sparc64/thread_info.h @@ -38,8 +38,8 @@ struct thread_info { /* D$ line 1 */ struct task_struct *task; unsigned long flags; - __u8 cpu; __u8 fpsaved[7]; + __u8 pad; unsigned long ksp; /* D$ line 2 */ @@ -49,7 +49,7 @@ struct thread_info { int preempt_count; /* 0 => preemptable, <0 => BUG */ __u8 new_child; __u8 syscall_noerror; - __u16 __pad; + __u16 cpu; unsigned long *utraps; @@ -83,8 +83,7 @@ struct thread_info { #define TI_CURRENT_DS (TI_FLAGS + TI_FLAG_BYTE_CURRENT_DS) #define TI_FPDEPTH (TI_FLAGS + TI_FLAG_BYTE_FPDEPTH) #define TI_WSAVED (TI_FLAGS + TI_FLAG_BYTE_WSAVED) -#define TI_CPU 0x00000010 -#define TI_FPSAVED 0x00000011 +#define TI_FPSAVED 0x00000010 #define TI_KSP 0x00000018 #define TI_FAULT_ADDR 0x00000020 #define TI_KREGS 0x00000028 @@ -92,6 +91,7 @@ struct thread_info { #define TI_PRE_COUNT 0x00000038 #define TI_NEW_CHILD 0x0000003c #define TI_SYS_NOERROR 0x0000003d +#define TI_CPU 0x0000003e #define TI_UTRAPS 0x00000040 #define TI_REG_WINDOW 0x00000048 #define TI_RWIN_SPTRS 0x000003c8 diff --git a/include/asm-sparc64/topology.h b/include/asm-sparc64/topology.h index 98a6c613589dcb..e0d450d600ec2a 100644 --- a/include/asm-sparc64/topology.h +++ b/include/asm-sparc64/topology.h @@ -6,4 +6,7 @@ #include <asm-generic/topology.h> +#define topology_core_id(cpu) (cpu_data(cpu).core_id) +#define topology_thread_siblings(cpu) (cpu_sibling_map[cpu]) + #endif /* _ASM_SPARC64_TOPOLOGY_H */ diff --git a/include/asm-sparc64/tsb.h b/include/asm-sparc64/tsb.h index ab55ffcb7bf496..76e4299dd9bc95 100644 --- a/include/asm-sparc64/tsb.h +++ b/include/asm-sparc64/tsb.h @@ -271,7 +271,7 @@ extern struct tsb_phys_patch_entry __tsb_phys_patch, __tsb_phys_patch_end; #define KERN_TSB4M_LOOKUP_TL1(TAG, REG1, REG2, REG3, REG4, OK_LABEL) \ sethi %hi(swapper_4m_tsb), REG1; \ or REG1, %lo(swapper_4m_tsb), REG1; \ - and TAG, (KERNEL_TSB_NENTRIES - 1), REG2; \ + and TAG, (KERNEL_TSB4M_NENTRIES - 1), REG2; \ sllx REG2, 4, REG2; \ add REG1, REG2, REG2; \ KTSB_LOAD_QUAD(REG2, REG3); \ diff --git a/include/asm-x86_64/calgary.h b/include/asm-x86_64/calgary.h index 7ee90064571955..4d5747a0923c7d 100644 --- a/include/asm-x86_64/calgary.h +++ b/include/asm-x86_64/calgary.h @@ -27,6 +27,7 @@ #include <linux/spinlock.h> #include <linux/device.h> #include <linux/dma-mapping.h> +#include <linux/timer.h> #include <asm/types.h> struct iommu_table { diff --git a/include/asm-x86_64/tlbflush.h b/include/asm-x86_64/tlbflush.h index 512401b8725fa5..8516225a838983 100644 --- a/include/asm-x86_64/tlbflush.h +++ b/include/asm-x86_64/tlbflush.h @@ -2,6 +2,7 @@ #define _X8664_TLBFLUSH_H #include <linux/mm.h> +#include <linux/sched.h> #include <asm/processor.h> #include <asm/system.h> diff --git a/include/linux/Kbuild b/include/linux/Kbuild index bcd01f269f60b6..e1013156c25ed2 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -239,6 +239,7 @@ unifdef-y += ipc.h unifdef-y += ipmi.h unifdef-y += ipv6.h unifdef-y += ipv6_route.h +unifdef-y += ip6_tunnel.h unifdef-y += isdn.h unifdef-y += isdnif.h unifdef-y += isdn_divertif.h diff --git a/include/linux/binfmts.h b/include/linux/binfmts.h index 2d956cd566aed1..e1a708337be353 100644 --- a/include/linux/binfmts.h +++ b/include/linux/binfmts.h @@ -17,6 +17,8 @@ struct pt_regs; #ifdef __KERNEL__ +#define CORENAME_MAX_SIZE 128 + /* * This structure is used to hold the arguments that are used when loading binaries. */ diff --git a/include/linux/capability.h b/include/linux/capability.h index 6548b35ab9f685..bbf8df7de28f09 100644 --- a/include/linux/capability.h +++ b/include/linux/capability.h @@ -16,6 +16,8 @@ #include <linux/types.h> #include <linux/compiler.h> +struct task_struct; + /* User-level do most of the mapping between kernel and user capabilities based on the version tag given by the kernel. The kernel might be somewhat backwards compatible, but don't bet on diff --git a/include/linux/compiler.h b/include/linux/compiler.h index 498c35920762e2..8287a72bb6a913 100644 --- a/include/linux/compiler.h +++ b/include/linux/compiler.h @@ -36,9 +36,7 @@ extern void __chk_io_ptr(const void __iomem *); #ifdef __KERNEL__ -#if __GNUC__ > 4 -#error no compiler-gcc.h file for this gcc version -#elif __GNUC__ == 4 +#if __GNUC__ >= 4 # include <linux/compiler-gcc4.h> #elif __GNUC__ == 3 && __GNUC_MINOR__ >= 2 # include <linux/compiler-gcc3.h> diff --git a/include/linux/freezer.h b/include/linux/freezer.h index 5e75e26d478724..4631086f50603d 100644 --- a/include/linux/freezer.h +++ b/include/linux/freezer.h @@ -37,25 +37,25 @@ static inline void do_not_freeze(struct task_struct *p) /* * Wake up a frozen process + * + * task_lock() is taken to prevent the race with refrigerator() which may + * occur if the freezing of tasks fails. Namely, without the lock, if the + * freezing of tasks failed, thaw_tasks() might have run before a task in + * refrigerator() could call frozen_process(), in which case the task would be + * frozen and no one would thaw it. */ static inline int thaw_process(struct task_struct *p) { + task_lock(p); if (frozen(p)) { p->flags &= ~PF_FROZEN; + task_unlock(p); wake_up_process(p); return 1; } - return 0; -} - -/* - * freezing is complete, mark process as frozen - */ -static inline void frozen_process(struct task_struct *p) -{ - p->flags |= PF_FROZEN; - wmb(); clear_tsk_thread_flag(p, TIF_FREEZE); + task_unlock(p); + return 0; } extern void refrigerator(void); @@ -71,14 +71,55 @@ static inline int try_to_freeze(void) return 0; } -extern void thaw_some_processes(int all); +/* + * The PF_FREEZER_SKIP flag should be set by a vfork parent right before it + * calls wait_for_completion(&vfork) and reset right after it returns from this + * function. Next, the parent should call try_to_freeze() to freeze itself + * appropriately in case the child has exited before the freezing of tasks is + * complete. However, we don't want kernel threads to be frozen in unexpected + * places, so we allow them to block freeze_processes() instead or to set + * PF_NOFREEZE if needed and PF_FREEZER_SKIP is only set for userland vfork + * parents. Fortunately, in the ____call_usermodehelper() case the parent won't + * really block freeze_processes(), since ____call_usermodehelper() (the child) + * does a little before exec/exit and it can't be frozen before waking up the + * parent. + */ + +/* + * If the current task is a user space one, tell the freezer not to count it as + * freezable. + */ +static inline void freezer_do_not_count(void) +{ + if (current->mm) + current->flags |= PF_FREEZER_SKIP; +} + +/* + * If the current task is a user space one, tell the freezer to count it as + * freezable again and try to freeze it. + */ +static inline void freezer_count(void) +{ + if (current->mm) { + current->flags &= ~PF_FREEZER_SKIP; + try_to_freeze(); + } +} + +/* + * Check if the task should be counted as freezeable by the freezer + */ +static inline int freezer_should_skip(struct task_struct *p) +{ + return !!(p->flags & PF_FREEZER_SKIP); +} #else static inline int frozen(struct task_struct *p) { return 0; } static inline int freezing(struct task_struct *p) { return 0; } static inline void freeze(struct task_struct *p) { BUG(); } static inline int thaw_process(struct task_struct *p) { return 1; } -static inline void frozen_process(struct task_struct *p) { BUG(); } static inline void refrigerator(void) {} static inline int freeze_processes(void) { BUG(); return 0; } @@ -86,5 +127,7 @@ static inline void thaw_processes(void) {} static inline int try_to_freeze(void) { return 0; } - +static inline void freezer_do_not_count(void) {} +static inline void freezer_count(void) {} +static inline int freezer_should_skip(struct task_struct *p) { return 0; } #endif diff --git a/include/linux/genhd.h b/include/linux/genhd.h index 4c03ee353e7868..9756fc102a83f2 100644 --- a/include/linux/genhd.h +++ b/include/linux/genhd.h @@ -66,6 +66,7 @@ struct partition { #include <linux/smp.h> #include <linux/string.h> #include <linux/fs.h> +#include <linux/workqueue.h> struct partition { unsigned char boot_ind; /* 0x80 - active */ @@ -94,6 +95,7 @@ struct hd_struct { #define GENHD_FL_REMOVABLE 1 #define GENHD_FL_DRIVERFS 2 +#define GENHD_FL_MEDIA_CHANGE_NOTIFY 4 #define GENHD_FL_CD 8 #define GENHD_FL_UP 16 #define GENHD_FL_SUPPRESS_PARTITION_INFO 32 @@ -138,6 +140,7 @@ struct gendisk { #else struct disk_stats dkstats; #endif + struct work_struct async_notify; }; /* Structure for sysfs attributes on block devices */ @@ -419,7 +422,7 @@ extern struct gendisk *alloc_disk_node(int minors, int node_id); extern struct gendisk *alloc_disk(int minors); extern struct kobject *get_disk(struct gendisk *disk); extern void put_disk(struct gendisk *disk); - +extern void genhd_media_change_notify(struct gendisk *disk); extern void blk_register_region(dev_t dev, unsigned long range, struct module *module, struct kobject *(*probe)(dev_t, int *, void *), diff --git a/include/linux/if_ether.h b/include/linux/if_ether.h index 1db774cf9dc2f9..3213f6f4aa5809 100644 --- a/include/linux/if_ether.h +++ b/include/linux/if_ether.h @@ -33,6 +33,7 @@ #define ETH_ZLEN 60 /* Min. octets in frame sans FCS */ #define ETH_DATA_LEN 1500 /* Max. octets in payload */ #define ETH_FRAME_LEN 1514 /* Max. octets in frame sans FCS */ +#define ETH_FCS_LEN 4 /* Octets in the FCS */ /* * These are the defined Ethernet Protocol ID's. diff --git a/include/linux/init.h b/include/linux/init.h index e007ae4dc41e7c..56ec4c62eee066 100644 --- a/include/linux/init.h +++ b/include/linux/init.h @@ -45,6 +45,19 @@ #define __exitdata __attribute__ ((__section__(".exit.data"))) #define __exit_call __attribute_used__ __attribute__ ((__section__ (".exitcall.exit"))) +/* modpost check for section mismatches during the kernel build. + * A section mismatch happens when there are references from a + * code or data section to an init section (both code or data). + * The init sections are (for most archs) discarded by the kernel + * when early init has completed so all such references are potential bugs. + * For exit sections the same issue exists. + * The following markers are used for the cases where the reference to + * the init/exit section (code or data) is valid and will teach modpost + * not to issue a warning. + * The markers follow same syntax rules as __init / __initdata. */ +#define __init_refok noinline __attribute__ ((__section__ (".text.init.refok"))) +#define __initdata_refok __attribute__ ((__section__ (".data.init.refok"))) + #ifdef MODULE #define __exit __attribute__ ((__section__(".exit.text"))) #else diff --git a/include/linux/kmalloc_sizes.h b/include/linux/kmalloc_sizes.h index bda23e00ed710e..e576b848ce10f8 100644 --- a/include/linux/kmalloc_sizes.h +++ b/include/linux/kmalloc_sizes.h @@ -19,17 +19,27 @@ CACHE(32768) CACHE(65536) CACHE(131072) -#if (NR_CPUS > 512) || (MAX_NUMNODES > 256) || !defined(CONFIG_MMU) +#if KMALLOC_MAX_SIZE >= 262144 CACHE(262144) #endif -#ifndef CONFIG_MMU +#if KMALLOC_MAX_SIZE >= 524288 CACHE(524288) +#endif +#if KMALLOC_MAX_SIZE >= 1048576 CACHE(1048576) -#ifdef CONFIG_LARGE_ALLOCS +#endif +#if KMALLOC_MAX_SIZE >= 2097152 CACHE(2097152) +#endif +#if KMALLOC_MAX_SIZE >= 4194304 CACHE(4194304) +#endif +#if KMALLOC_MAX_SIZE >= 8388608 CACHE(8388608) +#endif +#if KMALLOC_MAX_SIZE >= 16777216 CACHE(16777216) +#endif +#if KMALLOC_MAX_SIZE >= 33554432 CACHE(33554432) -#endif /* CONFIG_LARGE_ALLOCS */ -#endif /* CONFIG_MMU */ +#endif diff --git a/include/linux/libata.h b/include/linux/libata.h index 27d936279574dc..85f7b1bd1482ae 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -140,6 +140,7 @@ enum { ATA_DFLAG_PIO = (1 << 8), /* device limited to PIO mode */ ATA_DFLAG_NCQ_OFF = (1 << 9), /* device limited to non-NCQ mode */ + ATA_DFLAG_SPUNDOWN = (1 << 10), /* XXX: for spindown_compat */ ATA_DFLAG_INIT_MASK = (1 << 16) - 1, ATA_DFLAG_DETACH = (1 << 16), @@ -173,6 +174,7 @@ enum { ATA_FLAG_SETXFER_POLLING= (1 << 14), /* use polling for SETXFER */ ATA_FLAG_IGN_SIMPLEX = (1 << 15), /* ignore SIMPLEX */ ATA_FLAG_NO_IORDY = (1 << 16), /* controller lacks iordy */ + ATA_FLAG_ACPI_SATA = (1 << 17), /* need native SATA ACPI layout */ /* The following flag belongs to ap->pflags but is kept in * ap->flags because it's referenced in many LLDs and will be @@ -431,7 +433,6 @@ struct ata_device { struct scsi_device *sdev; /* attached SCSI device */ /* n_sector is used as CLEAR_OFFSET, read comment above CLEAR_OFFSET */ u64 n_sectors; /* size of device, if ATA */ - u64 n_sectors_boot; /* size of ATA device at startup */ unsigned int class; /* ATA_DEV_xxx */ u16 id[ATA_ID_WORDS]; /* IDENTIFY xxx DEVICE data */ u8 pio_mode; @@ -573,8 +574,6 @@ struct ata_port_operations { void (*phy_reset) (struct ata_port *ap); /* obsolete */ int (*set_mode) (struct ata_port *ap, struct ata_device **r_failed_dev); - void (*post_set_mode) (struct ata_port *ap); - int (*cable_detect) (struct ata_port *ap); int (*check_atapi_dma) (struct ata_queued_cmd *qc); diff --git a/include/linux/lockd/xdr4.h b/include/linux/lockd/xdr4.h index dd12b4c9e613ea..12bfe09de2b116 100644 --- a/include/linux/lockd/xdr4.h +++ b/include/linux/lockd/xdr4.h @@ -42,5 +42,6 @@ int nlmclt_encode_lockargs(struct rpc_rqst *, u32 *, struct nlm_args *); int nlmclt_encode_cancargs(struct rpc_rqst *, u32 *, struct nlm_args *); int nlmclt_encode_unlockargs(struct rpc_rqst *, u32 *, struct nlm_args *); */ +extern struct rpc_version nlm_version4; #endif /* LOCKD_XDR4_H */ diff --git a/include/linux/log2.h b/include/linux/log2.h index 57e641e19a8106..1b8a2c1cb0e30e 100644 --- a/include/linux/log2.h +++ b/include/linux/log2.h @@ -159,7 +159,7 @@ unsigned long __roundup_pow_of_two(unsigned long n) #define roundup_pow_of_two(n) \ ( \ __builtin_constant_p(n) ? ( \ - (n == 1) ? 0 : \ + (n == 1) ? 1 : \ (1UL << (ilog2((n) - 1) + 1)) \ ) : \ __roundup_pow_of_two(n) \ diff --git a/include/linux/mii.h b/include/linux/mii.h index beddc6d3b0f668..151b7e0182c7e6 100644 --- a/include/linux/mii.h +++ b/include/linux/mii.h @@ -56,8 +56,8 @@ #define BMSR_ANEGCOMPLETE 0x0020 /* Auto-negotiation complete */ #define BMSR_RESV 0x00c0 /* Unused... */ #define BMSR_ESTATEN 0x0100 /* Extended Status in R15 */ -#define BMSR_100FULL2 0x0200 /* Can do 100BASE-T2 HDX */ -#define BMSR_100HALF2 0x0400 /* Can do 100BASE-T2 FDX */ +#define BMSR_100HALF2 0x0200 /* Can do 100BASE-T2 HDX */ +#define BMSR_100FULL2 0x0400 /* Can do 100BASE-T2 FDX */ #define BMSR_10HALF 0x0800 /* Can do 10mbps, half-duplex */ #define BMSR_10FULL 0x1000 /* Can do 10mbps, full-duplex */ #define BMSR_100HALF 0x2000 /* Can do 100mbps, half-duplex */ diff --git a/include/linux/mm.h b/include/linux/mm.h index 4670ebd1f62292..e4183c6c7de3dc 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -1,7 +1,6 @@ #ifndef _LINUX_MM_H #define _LINUX_MM_H -#include <linux/sched.h> #include <linux/errno.h> #include <linux/capability.h> @@ -20,6 +19,7 @@ struct mempolicy; struct anon_vma; +struct user_struct; #ifndef CONFIG_DISCONTIGMEM /* Don't use mapnrs, do it properly */ extern unsigned long max_mapnr; @@ -717,14 +717,7 @@ extern unsigned long shmem_get_unmapped_area(struct file *file, unsigned long flags); #endif -static inline int can_do_mlock(void) -{ - if (capable(CAP_IPC_LOCK)) - return 1; - if (current->signal->rlim[RLIMIT_MEMLOCK].rlim_cur != 0) - return 1; - return 0; -} +extern int can_do_mlock(void); extern int user_shm_lock(size_t, struct user_struct *); extern void user_shm_unlock(size_t, struct user_struct *); diff --git a/include/linux/netfilter/nf_conntrack_ftp.h b/include/linux/netfilter/nf_conntrack_ftp.h index 81453ea7e4c2c0..b7c360ffd0d037 100644 --- a/include/linux/netfilter/nf_conntrack_ftp.h +++ b/include/linux/netfilter/nf_conntrack_ftp.h @@ -37,8 +37,7 @@ extern unsigned int (*nf_nat_ftp_hook)(struct sk_buff **pskb, enum nf_ct_ftp_type type, unsigned int matchoff, unsigned int matchlen, - struct nf_conntrack_expect *exp, - u32 *seq); + struct nf_conntrack_expect *exp); #endif /* __KERNEL__ */ #endif /* _NF_CONNTRACK_FTP_H */ diff --git a/include/linux/netfilter/nf_conntrack_h323_types.h b/include/linux/netfilter/nf_conntrack_h323_types.h index 38d74d5c970098..f35b6b4801e762 100644 --- a/include/linux/netfilter/nf_conntrack_h323_types.h +++ b/include/linux/netfilter/nf_conntrack_h323_types.h @@ -1,4 +1,4 @@ -/* Generated by Jing Min Zhao's ASN.1 parser, Apr 20 2006 +/* Generated by Jing Min Zhao's ASN.1 parser, May 16 2007 * * Copyright (c) 2006 Jing Min Zhao <zhaojingmin@users.sourceforge.net> * @@ -12,7 +12,7 @@ typedef struct TransportAddress_ipAddress { /* SEQUENCE */ typedef struct TransportAddress_ip6Address { /* SEQUENCE */ int options; /* No use */ - unsigned ip6; + unsigned ip; } TransportAddress_ip6Address; typedef struct TransportAddress { /* CHOICE */ @@ -364,23 +364,6 @@ typedef struct Alerting_UUIE { /* SEQUENCE */ Alerting_UUIE_fastStart fastStart; } Alerting_UUIE; -typedef struct Information_UUIE_fastStart { /* SEQUENCE OF */ - int count; - OpenLogicalChannel item[30]; -} Information_UUIE_fastStart; - -typedef struct Information_UUIE { /* SEQUENCE */ - enum { - eInformation_UUIE_callIdentifier = (1 << 31), - eInformation_UUIE_tokens = (1 << 30), - eInformation_UUIE_cryptoTokens = (1 << 29), - eInformation_UUIE_fastStart = (1 << 28), - eInformation_UUIE_fastConnectRefused = (1 << 27), - eInformation_UUIE_circuitInfo = (1 << 26), - } options; - Information_UUIE_fastStart fastStart; -} Information_UUIE; - typedef struct FacilityReason { /* CHOICE */ enum { eFacilityReason_routeCallToGatekeeper, @@ -471,7 +454,6 @@ typedef struct H323_UU_PDU_h323_message_body { /* CHOICE */ CallProceeding_UUIE callProceeding; Connect_UUIE connect; Alerting_UUIE alerting; - Information_UUIE information; Facility_UUIE facility; Progress_UUIE progress; }; @@ -561,6 +543,7 @@ typedef struct OpenLogicalChannelAck { /* SEQUENCE */ } options; OpenLogicalChannelAck_reverseLogicalChannelParameters reverseLogicalChannelParameters; + NetworkAccessParameters separateStack; OpenLogicalChannelAck_forwardMultiplexAckParameters forwardMultiplexAckParameters; } OpenLogicalChannelAck; diff --git a/include/linux/nfs4.h b/include/linux/nfs4.h index 1be5be88debe77..7e7f33a38fc06b 100644 --- a/include/linux/nfs4.h +++ b/include/linux/nfs4.h @@ -16,6 +16,7 @@ #include <linux/types.h> #define NFS4_VERIFIER_SIZE 8 +#define NFS4_STATEID_SIZE 16 #define NFS4_FHSIZE 128 #define NFS4_MAXPATHLEN PATH_MAX #define NFS4_MAXNAMLEN NAME_MAX @@ -113,7 +114,7 @@ struct nfs4_acl { }; typedef struct { char data[NFS4_VERIFIER_SIZE]; } nfs4_verifier; -typedef struct { char data[16]; } nfs4_stateid; +typedef struct { char data[NFS4_STATEID_SIZE]; } nfs4_stateid; enum nfs_opnum4 { OP_ACCESS = 3, diff --git a/include/linux/nfs_page.h b/include/linux/nfs_page.h index 41afab6b5f09c2..bd193af801629a 100644 --- a/include/linux/nfs_page.h +++ b/include/linux/nfs_page.h @@ -81,6 +81,7 @@ extern void nfs_pageio_init(struct nfs_pageio_descriptor *desc, extern int nfs_pageio_add_request(struct nfs_pageio_descriptor *, struct nfs_page *); extern void nfs_pageio_complete(struct nfs_pageio_descriptor *desc); +extern void nfs_pageio_cond_complete(struct nfs_pageio_descriptor *, pgoff_t); extern int nfs_wait_on_request(struct nfs_page *); extern void nfs_unlock_request(struct nfs_page *req); extern int nfs_set_page_writeback_locked(struct nfs_page *req); diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 3b1fbf49fa7d07..4712e269d8d3cd 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -371,6 +371,7 @@ #define PCI_DEVICE_ID_ATI_IXP600_SMBUS 0x4385 #define PCI_DEVICE_ID_ATI_IXP600_IDE 0x438c #define PCI_DEVICE_ID_ATI_IXP700_SATA 0x4390 +#define PCI_DEVICE_ID_ATI_IXP700_IDE 0x439c #define PCI_VENDOR_ID_VLSI 0x1004 #define PCI_DEVICE_ID_VLSI_82C592 0x0005 @@ -471,6 +472,7 @@ #define PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2 0x0219 #define PCI_DEVICE_ID_IBM_ICOM_V2_TWO_PORTS_RVX 0x021A #define PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM 0x0251 +#define PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM_PCIE 0x0361 #define PCI_DEVICE_ID_IBM_ICOM_FOUR_PORT_MODEL 0x252 #define PCI_VENDOR_ID_COMPEX2 0x101a /* pci.ids says "AT&T GIS (NCR)" */ diff --git a/include/linux/raid/bitmap.h b/include/linux/raid/bitmap.h index 6db9a4c153556a..dd5a05d03d4f47 100644 --- a/include/linux/raid/bitmap.h +++ b/include/linux/raid/bitmap.h @@ -232,6 +232,7 @@ struct bitmap { struct page **filemap; /* list of cache pages for the file */ unsigned long *filemap_attr; /* attributes associated w/ filemap pages */ unsigned long file_pages; /* number of pages in the file */ + int last_page_size; /* bytes in the last page */ unsigned long flags; diff --git a/include/linux/rmap.h b/include/linux/rmap.h index bdd277223af01e..97347f22fc207b 100644 --- a/include/linux/rmap.h +++ b/include/linux/rmap.h @@ -74,17 +74,14 @@ void page_add_new_anon_rmap(struct page *, struct vm_area_struct *, unsigned lon void page_add_file_rmap(struct page *); void page_remove_rmap(struct page *, struct vm_area_struct *); -/** - * page_dup_rmap - duplicate pte mapping to a page - * @page: the page to add the mapping to - * - * For copy_page_range only: minimal extract from page_add_rmap, - * avoiding unnecessary tests (already checked) so it's quicker. - */ -static inline void page_dup_rmap(struct page *page) +#ifdef CONFIG_DEBUG_VM +void page_dup_rmap(struct page *page, struct vm_area_struct *vma, unsigned long address); +#else +static inline void page_dup_rmap(struct page *page, struct vm_area_struct *vma, unsigned long address) { atomic_inc(&page->_mapcount); } +#endif /* * Called from mm/vmscan.c to handle paging out diff --git a/include/linux/sched.h b/include/linux/sched.h index a81897e2a244a7..d58e74b98367c7 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1182,6 +1182,7 @@ static inline void put_task_struct(struct task_struct *t) #define PF_SPREAD_SLAB 0x02000000 /* Spread some slab caches over cpuset */ #define PF_MEMPOLICY 0x10000000 /* Non-default NUMA mempolicy */ #define PF_MUTEX_TESTER 0x20000000 /* Thread belongs to the rt mutex tester */ +#define PF_FREEZER_SKIP 0x40000000 /* Freezer should not count it as freezeable */ /* * Only the _current_ task can read/write to tsk->flags, but other @@ -1615,11 +1616,13 @@ static inline int lock_need_resched(spinlock_t *lock) return 0; } -/* Reevaluate whether the task has signals pending delivery. - This is required every time the blocked sigset_t changes. - callers must hold sighand->siglock. */ - -extern FASTCALL(void recalc_sigpending_tsk(struct task_struct *t)); +/* + * Reevaluate whether the task has signals pending delivery. + * Wake the task if so. + * This is required every time the blocked sigset_t changes. + * callers must hold sighand->siglock. + */ +extern void recalc_sigpending_and_wake(struct task_struct *t); extern void recalc_sigpending(void); extern void signal_wake_up(struct task_struct *t, int resume_stopped); diff --git a/include/linux/slab.h b/include/linux/slab.h index 71829efc40ba22..a015236cc572b8 100644 --- a/include/linux/slab.h +++ b/include/linux/slab.h @@ -32,9 +32,6 @@ typedef struct kmem_cache kmem_cache_t __deprecated; #define SLAB_MEM_SPREAD 0x00100000UL /* Spread some memory over cpuset */ #define SLAB_TRACE 0x00200000UL /* Trace allocations and frees */ -/* Flags passed to a constructor functions */ -#define SLAB_CTOR_CONSTRUCTOR 0x001UL /* If not set, then deconstructor */ - /* * struct kmem_cache related prototypes */ @@ -77,6 +74,21 @@ static inline void *kmem_cache_alloc_node(struct kmem_cache *cachep, #endif /* + * The largest kmalloc size supported by the slab allocators is + * 32 megabyte (2^25) or the maximum allocatable page order if that is + * less than 32 MB. + * + * WARNING: Its not easy to increase this value since the allocators have + * to do various tricks to work around compiler limitations in order to + * ensure proper constant folding. + */ +#define KMALLOC_SHIFT_HIGH ((MAX_ORDER + PAGE_SHIFT) <= 25 ? \ + (MAX_ORDER + PAGE_SHIFT) : 25) + +#define KMALLOC_MAX_SIZE (1UL << KMALLOC_SHIFT_HIGH) +#define KMALLOC_MAX_ORDER (KMALLOC_SHIFT_HIGH - PAGE_SHIFT) + +/* * Common kmalloc functions provided by all allocators */ void *__kmalloc(size_t, gfp_t); @@ -233,9 +245,6 @@ extern void *__kmalloc_node_track_caller(size_t, gfp_t, int, void *); #endif /* DEBUG_SLAB */ -extern const struct seq_operations slabinfo_op; -ssize_t slabinfo_write(struct file *, const char __user *, size_t, loff_t *); - #endif /* __KERNEL__ */ #endif /* _LINUX_SLAB_H */ diff --git a/include/linux/slab_def.h b/include/linux/slab_def.h index 5e4364644ed13e..8d81a60518e4c6 100644 --- a/include/linux/slab_def.h +++ b/include/linux/slab_def.h @@ -109,4 +109,7 @@ found: #endif /* CONFIG_NUMA */ +extern const struct seq_operations slabinfo_op; +ssize_t slabinfo_write(struct file *, const char __user *, size_t, loff_t *); + #endif /* _LINUX_SLAB_DEF_H */ diff --git a/include/linux/slub_def.h b/include/linux/slub_def.h index fd6627e2d11507..0764c829d967ab 100644 --- a/include/linux/slub_def.h +++ b/include/linux/slub_def.h @@ -40,7 +40,6 @@ struct kmem_cache { int objects; /* Number of objects in slab */ int refcount; /* Refcount for slab cache destroy */ void (*ctor)(void *, struct kmem_cache *, unsigned long); - void (*dtor)(void *, struct kmem_cache *, unsigned long); int inuse; /* Offset to metadata */ int align; /* Alignment */ const char *name; /* Name (only for display!) */ @@ -59,17 +58,6 @@ struct kmem_cache { */ #define KMALLOC_SHIFT_LOW 3 -#ifdef CONFIG_LARGE_ALLOCS -#define KMALLOC_SHIFT_HIGH ((MAX_ORDER + PAGE_SHIFT) =< 25 ? \ - (MAX_ORDER + PAGE_SHIFT - 1) : 25) -#else -#if !defined(CONFIG_MMU) || NR_CPUS > 512 || MAX_NUMNODES > 256 -#define KMALLOC_SHIFT_HIGH 20 -#else -#define KMALLOC_SHIFT_HIGH 18 -#endif -#endif - /* * We keep the general caches in an array of slab caches that are used for * 2^x bytes of allocations. @@ -80,7 +68,7 @@ extern struct kmem_cache kmalloc_caches[KMALLOC_SHIFT_HIGH + 1]; * Sorry that the following has to be that ugly but some versions of GCC * have trouble with constant propagation and loops. */ -static inline int kmalloc_index(int size) +static inline int kmalloc_index(size_t size) { /* * We should return 0 if size == 0 but we use the smallest object @@ -88,7 +76,7 @@ static inline int kmalloc_index(int size) */ WARN_ON_ONCE(size == 0); - if (size >= (1 << KMALLOC_SHIFT_HIGH)) + if (size > KMALLOC_MAX_SIZE) return -1; if (size > 64 && size <= 96) @@ -111,17 +99,13 @@ static inline int kmalloc_index(int size) if (size <= 64 * 1024) return 16; if (size <= 128 * 1024) return 17; if (size <= 256 * 1024) return 18; -#if KMALLOC_SHIFT_HIGH > 18 if (size <= 512 * 1024) return 19; if (size <= 1024 * 1024) return 20; -#endif -#if KMALLOC_SHIFT_HIGH > 20 if (size <= 2 * 1024 * 1024) return 21; if (size <= 4 * 1024 * 1024) return 22; if (size <= 8 * 1024 * 1024) return 23; if (size <= 16 * 1024 * 1024) return 24; if (size <= 32 * 1024 * 1024) return 25; -#endif return -1; /* @@ -146,7 +130,12 @@ static inline struct kmem_cache *kmalloc_slab(size_t size) if (index == 0) return NULL; - if (index < 0) { + /* + * This function only gets expanded if __builtin_constant_p(size), so + * testing it here shouldn't be needed. But some versions of gcc need + * help. + */ + if (__builtin_constant_p(size) && index < 0) { /* * Generate a link failure. Would be great if we could * do something to stop the compile here. diff --git a/include/linux/smb_fs.h b/include/linux/smb_fs.h index 13b3af5478646b..2c5cd55f44fff4 100644 --- a/include/linux/smb_fs.h +++ b/include/linux/smb_fs.h @@ -29,6 +29,7 @@ #include <linux/pagemap.h> #include <linux/vmalloc.h> #include <linux/smb_mount.h> +#include <linux/jiffies.h> #include <asm/unaligned.h> static inline struct smb_sb_info *SMB_SB(struct super_block *sb) diff --git a/include/linux/smp.h b/include/linux/smp.h index 3f70149eabbb2e..96ac21f8dd735a 100644 --- a/include/linux/smp.h +++ b/include/linux/smp.h @@ -6,6 +6,7 @@ * Alan Cox. <alan@redhat.com> */ +#include <linux/errno.h> extern void cpu_idle(void); @@ -99,11 +100,9 @@ static inline void smp_send_reschedule(int cpu) { } #define num_booting_cpus() 1 #define smp_prepare_boot_cpu() do {} while (0) static inline int smp_call_function_single(int cpuid, void (*func) (void *info), - void *info, int retry, int wait) + void *info, int retry, int wait) { - /* Disable interrupts here? */ - func(info); - return 0; + return -EBUSY; } #endif /* !SMP */ diff --git a/include/linux/sunrpc/rpc_pipe_fs.h b/include/linux/sunrpc/rpc_pipe_fs.h index 4a68125b6de630..ad293760f6ebaa 100644 --- a/include/linux/sunrpc/rpc_pipe_fs.h +++ b/include/linux/sunrpc/rpc_pipe_fs.h @@ -47,6 +47,8 @@ extern struct dentry *rpc_mkpipe(struct dentry *, const char *, void *, struct r extern int rpc_unlink(struct dentry *); extern struct vfsmount *rpc_get_mount(void); extern void rpc_put_mount(void); +extern int register_rpc_pipefs(void); +extern void unregister_rpc_pipefs(void); #endif #endif diff --git a/include/linux/sunrpc/xprt.h b/include/linux/sunrpc/xprt.h index fa89ce6ce076cb..34f7590506fac8 100644 --- a/include/linux/sunrpc/xprt.h +++ b/include/linux/sunrpc/xprt.h @@ -244,6 +244,8 @@ void xprt_disconnect(struct rpc_xprt *xprt); */ struct rpc_xprt * xs_setup_udp(struct sockaddr *addr, size_t addrlen, struct rpc_timeout *to); struct rpc_xprt * xs_setup_tcp(struct sockaddr *addr, size_t addrlen, struct rpc_timeout *to); +int init_socket_xprt(void); +void cleanup_socket_xprt(void); /* * Reserved bit positions in xprt->state diff --git a/include/linux/task_io_accounting_ops.h b/include/linux/task_io_accounting_ops.h index 1218733ec6b58c..ff46c6fad79da3 100644 --- a/include/linux/task_io_accounting_ops.h +++ b/include/linux/task_io_accounting_ops.h @@ -4,6 +4,8 @@ #ifndef __TASK_IO_ACCOUNTING_OPS_INCLUDED #define __TASK_IO_ACCOUNTING_OPS_INCLUDED +#include <linux/sched.h> + #ifdef CONFIG_TASK_IO_ACCOUNTING static inline void task_io_account_read(size_t bytes) { diff --git a/include/linux/timer.h b/include/linux/timer.h index e0c5c16c992f2a..c661710d3627da 100644 --- a/include/linux/timer.h +++ b/include/linux/timer.h @@ -69,6 +69,12 @@ extern int __mod_timer(struct timer_list *timer, unsigned long expires); extern int mod_timer(struct timer_list *timer, unsigned long expires); /* + * The jiffies value which is added to now, when there is no timer + * in the timer wheel: + */ +#define NEXT_TIMER_MAX_DELTA ((1UL << 30) - 1) + +/* * Return when the next timer-wheel timeout occurs (in absolute jiffies), * locks the timer base: */ diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index a25c2afa67e100..e7560389079ceb 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -267,8 +267,6 @@ struct v4l2_pix_format __u32 sizeimage; enum v4l2_colorspace colorspace; __u32 priv; /* private data, depends on pixelformat */ - __u32 left; /* only valid if V4L2_CAP_VIDEO_OUTPUT_POS is set */ - __u32 top; /* only valid if V4L2_CAP_VIDEO_OUTPUT_POS is set */ }; /* Pixel format FOURCC depth Description */ diff --git a/include/linux/workqueue.h b/include/linux/workqueue.h index d555f31c0746a3..ce0719a2cfeb03 100644 --- a/include/linux/workqueue.h +++ b/include/linux/workqueue.h @@ -122,7 +122,7 @@ extern struct workqueue_struct *__create_workqueue(const char *name, int singlethread, int freezeable); #define create_workqueue(name) __create_workqueue((name), 0, 0) -#define create_freezeable_workqueue(name) __create_workqueue((name), 0, 1) +#define create_freezeable_workqueue(name) __create_workqueue((name), 1, 1) #define create_singlethread_workqueue(name) __create_workqueue((name), 1, 0) extern void destroy_workqueue(struct workqueue_struct *wq); @@ -160,7 +160,7 @@ static inline int cancel_delayed_work(struct delayed_work *work) { int ret; - ret = del_timer(&work->timer); + ret = del_timer_sync(&work->timer); if (ret) work_clear_pending(&work->work); return ret; diff --git a/include/linux/writeback.h b/include/linux/writeback.h index 050915b5957667..4ef4d22e5e43bb 100644 --- a/include/linux/writeback.h +++ b/include/linux/writeback.h @@ -4,6 +4,8 @@ #ifndef WRITEBACK_H #define WRITEBACK_H +#include <linux/sched.h> + struct backing_dev_info; extern spinlock_t inode_lock; diff --git a/include/net/bluetooth/l2cap.h b/include/net/bluetooth/l2cap.h index 8242a0ee1f5868..87df4e87622d0c 100644 --- a/include/net/bluetooth/l2cap.h +++ b/include/net/bluetooth/l2cap.h @@ -129,8 +129,10 @@ struct l2cap_conf_rsp { __u8 data[0]; } __attribute__ ((packed)); -#define L2CAP_CONF_SUCCESS 0x00 -#define L2CAP_CONF_UNACCEPT 0x01 +#define L2CAP_CONF_SUCCESS 0x0000 +#define L2CAP_CONF_UNACCEPT 0x0001 +#define L2CAP_CONF_REJECT 0x0002 +#define L2CAP_CONF_UNKNOWN 0x0003 struct l2cap_conf_opt { __u8 type; @@ -215,6 +217,8 @@ struct l2cap_pinfo { __u32 link_mode; + __u8 conf_req[64]; + __u8 conf_len; __u8 conf_state; __u8 conf_retry; __u16 conf_mtu; diff --git a/include/net/dst.h b/include/net/dst.h index e12a8ce0b9b307..82270f9332db94 100644 --- a/include/net/dst.h +++ b/include/net/dst.h @@ -265,9 +265,16 @@ static inline int xfrm_lookup(struct dst_entry **dst_p, struct flowi *fl, { return 0; } +static inline int __xfrm_lookup(struct dst_entry **dst_p, struct flowi *fl, + struct sock *sk, int flags) +{ + return 0; +} #else extern int xfrm_lookup(struct dst_entry **dst_p, struct flowi *fl, struct sock *sk, int flags); +extern int __xfrm_lookup(struct dst_entry **dst_p, struct flowi *fl, + struct sock *sk, int flags); #endif #endif diff --git a/include/net/ipv6.h b/include/net/ipv6.h index 4fa5dfe886c4e3..78a0d06d98d542 100644 --- a/include/net/ipv6.h +++ b/include/net/ipv6.h @@ -469,6 +469,9 @@ extern void ip6_flush_pending_frames(struct sock *sk); extern int ip6_dst_lookup(struct sock *sk, struct dst_entry **dst, struct flowi *fl); +extern int ip6_dst_blackhole(struct sock *sk, + struct dst_entry **dst, + struct flowi *fl); extern int ip6_sk_dst_lookup(struct sock *sk, struct dst_entry **dst, struct flowi *fl); diff --git a/include/rdma/ib_umem.h b/include/rdma/ib_umem.h index b3a36f7d79e5ee..c533d6c7903f09 100644 --- a/include/rdma/ib_umem.h +++ b/include/rdma/ib_umem.h @@ -35,6 +35,7 @@ #include <linux/list.h> #include <linux/scatterlist.h> +#include <linux/workqueue.h> struct ib_ucontext; diff --git a/include/rdma/ib_verbs.h b/include/rdma/ib_verbs.h index 47cefca59c8998..0627a6aa282ac2 100644 --- a/include/rdma/ib_verbs.h +++ b/include/rdma/ib_verbs.h @@ -890,6 +890,8 @@ struct ib_device { spinlock_t client_data_lock; struct ib_cache cache; + int *pkey_tbl_len; + int *gid_tbl_len; u32 flags; @@ -1118,6 +1120,12 @@ int ib_modify_port(struct ib_device *device, u8 port_num, int port_modify_mask, struct ib_port_modify *port_modify); +int ib_find_gid(struct ib_device *device, union ib_gid *gid, + u8 *port_num, u16 *index); + +int ib_find_pkey(struct ib_device *device, + u8 port_num, u16 pkey, u16 *index); + /** * ib_alloc_pd - Allocates an unused protection domain. * @device: The device on which to allocate the protection domain. diff --git a/include/sound/soc.h b/include/sound/soc.h index b1dc364b8f74cc..db6edba8ef08c1 100644 --- a/include/sound/soc.h +++ b/include/sound/soc.h @@ -22,7 +22,7 @@ #include <sound/control.h> #include <sound/ac97_codec.h> -#define SND_SOC_VERSION "0.13.0" +#define SND_SOC_VERSION "0.13.1" /* * Convenience kcontrol builders @@ -83,6 +83,7 @@ #define SND_SOC_DAI_AC97 0x1 #define SND_SOC_DAI_I2S 0x2 #define SND_SOC_DAI_PCM 0x4 +#define SND_SOC_DAI_AC97_BUS 0x8 /* for custom i.e. non ac97_codec.c */ /* * DAI hardware audio formats @@ -278,6 +279,7 @@ struct snd_soc_cpu_ops { struct snd_soc_codec_dai { char *name; int id; + unsigned char type; /* DAI capabilities */ struct snd_soc_pcm_stream playback; diff --git a/include/sound/version.h b/include/sound/version.h index e820f0e7bdd32b..50ee4fd420fa3b 100644 --- a/include/sound/version.h +++ b/include/sound/version.h @@ -1,3 +1,3 @@ /* include/version.h. Generated by alsa/ksync script. */ #define CONFIG_SND_VERSION "1.0.14rc4" -#define CONFIG_SND_DATE " (Wed May 09 09:51:39 2007 UTC)" +#define CONFIG_SND_DATE " (Wed May 16 09:45:46 2007 UTC)" diff --git a/init/Kconfig b/init/Kconfig index 4e009fde4b695f..a9e99f8328ff48 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -567,7 +567,6 @@ config SLAB a slab allocator. config SLUB - depends on EXPERIMENTAL && !ARCH_USES_SLAB_PAGE_STRUCT bool "SLUB (Unqueued Allocator)" help SLUB is a slab allocator that minimizes cache line usage @@ -577,14 +576,11 @@ config SLUB and has enhanced diagnostics. config SLOB -# -# SLOB does not support SMP because SLAB_DESTROY_BY_RCU is unsupported -# - depends on EMBEDDED && !SMP && !SPARSEMEM + depends on EMBEDDED && !SPARSEMEM bool "SLOB (Simple Allocator)" help SLOB replaces the SLAB allocator with a drastically simpler - allocator. SLOB is more space efficient that SLAB but does not + allocator. SLOB is more space efficient than SLAB but does not scale well (single lock for all operations) and is also highly susceptible to fragmentation. SLUB can accomplish a higher object density. It is usually better to use SLUB instead of SLOB. diff --git a/init/main.c b/init/main.c index 1940fa75e82e1c..eb8bdbae4fc790 100644 --- a/init/main.c +++ b/init/main.c @@ -423,7 +423,7 @@ static void __init setup_command_line(char *command_line) * gcc-3.4 accidentally inlines this function, so use noinline. */ -static void noinline rest_init(void) +static void noinline __init_refok rest_init(void) __releases(kernel_lock) { int pid; diff --git a/ipc/mqueue.c b/ipc/mqueue.c index fab5707cb5f720..a242c83d89d604 100644 --- a/ipc/mqueue.c +++ b/ipc/mqueue.c @@ -215,8 +215,7 @@ static void init_once(void *foo, struct kmem_cache * cachep, unsigned long flags { struct mqueue_inode_info *p = (struct mqueue_inode_info *) foo; - if (flags & SLAB_CTOR_CONSTRUCTOR) - inode_init_once(&p->vfs_inode); + inode_init_once(&p->vfs_inode); } static struct inode *mqueue_alloc_inode(struct super_block *sb) diff --git a/kernel/exit.c b/kernel/exit.c index c6d14b8008ddf3..5b888c24e43e0c 100644 --- a/kernel/exit.c +++ b/kernel/exit.c @@ -762,11 +762,8 @@ static void exit_notify(struct task_struct *tsk) read_lock(&tasklist_lock); spin_lock_irq(&tsk->sighand->siglock); for (t = next_thread(tsk); t != tsk; t = next_thread(t)) - if (!signal_pending(t) && !(t->flags & PF_EXITING)) { - recalc_sigpending_tsk(t); - if (signal_pending(t)) - signal_wake_up(t, 0); - } + if (!signal_pending(t) && !(t->flags & PF_EXITING)) + recalc_sigpending_and_wake(t); spin_unlock_irq(&tsk->sighand->siglock); read_unlock(&tasklist_lock); } diff --git a/kernel/fork.c b/kernel/fork.c index 49530e40ea8b7e..73ad5cda1bcd27 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -45,6 +45,7 @@ #include <linux/acct.h> #include <linux/tsacct_kern.h> #include <linux/cn_proc.h> +#include <linux/freezer.h> #include <linux/delayacct.h> #include <linux/taskstats_kern.h> #include <linux/random.h> @@ -1405,7 +1406,9 @@ long do_fork(unsigned long clone_flags, } if (clone_flags & CLONE_VFORK) { + freezer_do_not_count(); wait_for_completion(&vfork); + freezer_count(); if (unlikely (current->ptrace & PT_TRACE_VFORK_DONE)) { current->ptrace_message = nr; ptrace_notify ((PTRACE_EVENT_VFORK_DONE << 8) | SIGTRAP); @@ -1427,10 +1430,8 @@ static void sighand_ctor(void *data, struct kmem_cache *cachep, { struct sighand_struct *sighand = data; - if (flags & SLAB_CTOR_CONSTRUCTOR) { - spin_lock_init(&sighand->siglock); - INIT_LIST_HEAD(&sighand->signalfd_list); - } + spin_lock_init(&sighand->siglock); + INIT_LIST_HEAD(&sighand->signalfd_list); } void __init proc_caches_init(void) diff --git a/kernel/irq/spurious.c b/kernel/irq/spurious.c index b0d81aae472ff4..bd9e272d55e9f0 100644 --- a/kernel/irq/spurious.c +++ b/kernel/irq/spurious.c @@ -135,6 +135,39 @@ report_bad_irq(unsigned int irq, struct irq_desc *desc, irqreturn_t action_ret) } } +static inline int try_misrouted_irq(unsigned int irq, struct irq_desc *desc, irqreturn_t action_ret) +{ + struct irqaction *action; + + if (!irqfixup) + return 0; + + /* We didn't actually handle the IRQ - see if it was misrouted? */ + if (action_ret == IRQ_NONE) + return 1; + + /* + * But for 'irqfixup == 2' we also do it for handled interrupts if + * they are marked as IRQF_IRQPOLL (or for irq zero, which is the + * traditional PC timer interrupt.. Legacy) + */ + if (irqfixup < 2) + return 0; + + if (!irq) + return 1; + + /* + * Since we don't get the descriptor lock, "action" can + * change under us. We don't really care, but we don't + * want to follow a NULL pointer. So tell the compiler to + * just load it once by using a barrier. + */ + action = desc->action; + barrier(); + return action && (action->flags & IRQF_IRQPOLL); +} + void note_interrupt(unsigned int irq, struct irq_desc *desc, irqreturn_t action_ret) { @@ -144,15 +177,10 @@ void note_interrupt(unsigned int irq, struct irq_desc *desc, report_bad_irq(irq, desc, action_ret); } - if (unlikely(irqfixup)) { - /* Don't punish working computers */ - if ((irqfixup == 2 && ((irq == 0) || - (desc->action->flags & IRQF_IRQPOLL))) || - action_ret == IRQ_NONE) { - int ok = misrouted_irq(irq); - if (action_ret == IRQ_NONE) - desc->irqs_unhandled -= ok; - } + if (unlikely(try_misrouted_irq(irq, desc, action_ret))) { + int ok = misrouted_irq(irq); + if (action_ret == IRQ_NONE) + desc->irqs_unhandled -= ok; } desc->irq_count++; diff --git a/kernel/kallsyms.c b/kernel/kallsyms.c index f1bda23140b2a6..fed54418626c10 100644 --- a/kernel/kallsyms.c +++ b/kernel/kallsyms.c @@ -257,7 +257,8 @@ const char *kallsyms_lookup(unsigned long addr, pos = get_symbol_pos(addr, symbolsize, offset); /* Grab name */ kallsyms_expand_symbol(get_symbol_offset(pos), namebuf); - *modname = NULL; + if (modname) + *modname = NULL; return namebuf; } diff --git a/kernel/kthread.c b/kernel/kthread.c index df8a8e8f6ca4fb..bbd51b81a3e86e 100644 --- a/kernel/kthread.c +++ b/kernel/kthread.c @@ -70,7 +70,7 @@ static int kthread(void *_create) data = create->data; /* OK, tell user we're spawned, wait for stop or wakeup */ - __set_current_state(TASK_INTERRUPTIBLE); + __set_current_state(TASK_UNINTERRUPTIBLE); complete(&create->started); schedule(); @@ -162,7 +162,10 @@ EXPORT_SYMBOL(kthread_create); */ void kthread_bind(struct task_struct *k, unsigned int cpu) { - BUG_ON(k->state != TASK_INTERRUPTIBLE); + if (k->state != TASK_UNINTERRUPTIBLE) { + WARN_ON(1); + return; + } /* Must have done schedule() in kthread() before we set_task_cpu */ wait_task_inactive(k); set_task_cpu(k, cpu); diff --git a/kernel/power/disk.c b/kernel/power/disk.c index b5f0543ed84d38..f445b9cd60fbda 100644 --- a/kernel/power/disk.c +++ b/kernel/power/disk.c @@ -416,7 +416,8 @@ static ssize_t disk_store(struct kset *kset, const char *buf, size_t n) mutex_lock(&pm_mutex); for (i = HIBERNATION_FIRST; i <= HIBERNATION_MAX; i++) { - if (!strncmp(buf, hibernation_modes[i], len)) { + if (len == strlen(hibernation_modes[i]) + && !strncmp(buf, hibernation_modes[i], len)) { mode = i; break; } diff --git a/kernel/power/main.c b/kernel/power/main.c index 40d56a31245e96..8812985f30296c 100644 --- a/kernel/power/main.c +++ b/kernel/power/main.c @@ -97,25 +97,26 @@ static int suspend_prepare(suspend_state_t state) } } - if (pm_ops->prepare) { - if ((error = pm_ops->prepare(state))) - goto Thaw; - } - suspend_console(); error = device_suspend(PMSG_SUSPEND); if (error) { printk(KERN_ERR "Some devices failed to suspend\n"); - goto Resume_devices; + goto Resume_console; } + if (pm_ops->prepare) { + if ((error = pm_ops->prepare(state))) + goto Resume_devices; + } + error = disable_nonboot_cpus(); if (!error) return 0; enable_nonboot_cpus(); - Resume_devices: pm_finish(state); + Resume_devices: device_resume(); + Resume_console: resume_console(); Thaw: thaw_processes(); @@ -289,13 +290,13 @@ static ssize_t state_store(struct kset *kset, const char *buf, size_t n) len = p ? p - buf : n; /* First, check if we are requested to hibernate */ - if (!strncmp(buf, "disk", len)) { + if (len == 4 && !strncmp(buf, "disk", len)) { error = hibernate(); return error ? error : n; } for (s = &pm_states[state]; state < PM_SUSPEND_MAX; s++, state++) { - if (*s && !strncmp(buf, *s, len)) + if (*s && len == strlen(*s) && !strncmp(buf, *s, len)) break; } if (state < PM_SUSPEND_MAX && *s) diff --git a/kernel/power/process.c b/kernel/power/process.c index 088419387388ca..e0233d8422b9ed 100644 --- a/kernel/power/process.c +++ b/kernel/power/process.c @@ -31,16 +31,36 @@ static inline int freezeable(struct task_struct * p) return 1; } +/* + * freezing is complete, mark current process as frozen + */ +static inline void frozen_process(void) +{ + if (!unlikely(current->flags & PF_NOFREEZE)) { + current->flags |= PF_FROZEN; + wmb(); + } + clear_tsk_thread_flag(current, TIF_FREEZE); +} + /* Refrigerator is place where frozen processes are stored :-). */ void refrigerator(void) { /* Hmm, should we be allowed to suspend when there are realtime processes around? */ long save; + + task_lock(current); + if (freezing(current)) { + frozen_process(); + task_unlock(current); + } else { + task_unlock(current); + return; + } save = current->state; pr_debug("%s entered refrigerator\n", current->comm); - frozen_process(current); spin_lock_irq(¤t->sighand->siglock); recalc_sigpending(); /* We sent fake signal, clean it up */ spin_unlock_irq(¤t->sighand->siglock); @@ -81,7 +101,7 @@ static void cancel_freezing(struct task_struct *p) pr_debug(" clean up: %s\n", p->comm); do_not_freeze(p); spin_lock_irqsave(&p->sighand->siglock, flags); - recalc_sigpending_tsk(p); + recalc_sigpending_and_wake(p); spin_unlock_irqrestore(&p->sighand->siglock, flags); } } @@ -112,22 +132,12 @@ static unsigned int try_to_freeze_tasks(int freeze_user_space) cancel_freezing(p); continue; } - if (is_user_space(p)) { - if (!freeze_user_space) - continue; - - /* Freeze the task unless there is a vfork - * completion pending - */ - if (!p->vfork_done) - freeze_process(p); - } else { - if (freeze_user_space) - continue; - - freeze_process(p); - } - todo++; + if (freeze_user_space && !is_user_space(p)) + continue; + + freeze_process(p); + if (!freezer_should_skip(p)) + todo++; } while_each_thread(g, p); read_unlock(&tasklist_lock); yield(); /* Yield is okay here */ @@ -149,13 +159,16 @@ static unsigned int try_to_freeze_tasks(int freeze_user_space) TIMEOUT / HZ, todo); read_lock(&tasklist_lock); do_each_thread(g, p) { - if (is_user_space(p) == !freeze_user_space) + if (freeze_user_space && !is_user_space(p)) continue; - if (freezeable(p) && !frozen(p)) + task_lock(p); + if (freezeable(p) && !frozen(p) && + !freezer_should_skip(p)) printk(KERN_ERR " %s\n", p->comm); cancel_freezing(p); + task_unlock(p); } while_each_thread(g, p); read_unlock(&tasklist_lock); } @@ -200,9 +213,7 @@ static void thaw_tasks(int thaw_user_space) if (is_user_space(p) == !thaw_user_space) continue; - if (!thaw_process(p)) - printk(KERN_WARNING " Strange, %s not stopped\n", - p->comm ); + thaw_process(p); } while_each_thread(g, p); read_unlock(&tasklist_lock); } diff --git a/kernel/power/swap.c b/kernel/power/swap.c index b8b235cc19d159..8b1a1b8371459e 100644 --- a/kernel/power/swap.c +++ b/kernel/power/swap.c @@ -584,7 +584,7 @@ int swsusp_check(void) resume_bdev = open_by_devnum(swsusp_resume_device, FMODE_READ); if (!IS_ERR(resume_bdev)) { set_blocksize(resume_bdev, PAGE_SIZE); - memset(swsusp_header, 0, sizeof(PAGE_SIZE)); + memset(swsusp_header, 0, PAGE_SIZE); error = bio_read_page(swsusp_resume_block, swsusp_header, NULL); if (error) diff --git a/kernel/profile.c b/kernel/profile.c index cc91b9bf759dc5..5b20fe977bed08 100644 --- a/kernel/profile.c +++ b/kernel/profile.c @@ -26,6 +26,7 @@ #include <asm/sections.h> #include <asm/semaphore.h> #include <asm/irq_regs.h> +#include <asm/ptrace.h> struct profile_hit { u32 pc, hits; diff --git a/kernel/sched.c b/kernel/sched.c index 799d23b4e35dac..13cdab3b4c4805 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -4775,9 +4775,7 @@ int __sched cond_resched_softirq(void) BUG_ON(!in_softirq()); if (need_resched() && system_state == SYSTEM_RUNNING) { - raw_local_irq_disable(); - _local_bh_enable(); - raw_local_irq_enable(); + local_bh_enable(); __cond_resched(); local_bh_disable(); return 1; diff --git a/kernel/signal.c b/kernel/signal.c index 364fc95bf97cee..acdfc0549c6fd8 100644 --- a/kernel/signal.c +++ b/kernel/signal.c @@ -96,15 +96,27 @@ static inline int has_pending_signals(sigset_t *signal, sigset_t *blocked) #define PENDING(p,b) has_pending_signals(&(p)->signal, (b)) -fastcall void recalc_sigpending_tsk(struct task_struct *t) +static int recalc_sigpending_tsk(struct task_struct *t) { if (t->signal->group_stop_count > 0 || (freezing(t)) || PENDING(&t->pending, &t->blocked) || - PENDING(&t->signal->shared_pending, &t->blocked)) + PENDING(&t->signal->shared_pending, &t->blocked)) { set_tsk_thread_flag(t, TIF_SIGPENDING); - else - clear_tsk_thread_flag(t, TIF_SIGPENDING); + return 1; + } + clear_tsk_thread_flag(t, TIF_SIGPENDING); + return 0; +} + +/* + * After recalculating TIF_SIGPENDING, we need to make sure the task wakes up. + * This is superfluous when called on current, the wakeup is a harmless no-op. + */ +void recalc_sigpending_and_wake(struct task_struct *t) +{ + if (recalc_sigpending_tsk(t)) + signal_wake_up(t, 0); } void recalc_sigpending(void) @@ -744,7 +756,7 @@ force_sig_info(int sig, struct siginfo *info, struct task_struct *t) action->sa.sa_handler = SIG_DFL; if (blocked) { sigdelset(&t->blocked, sig); - recalc_sigpending_tsk(t); + recalc_sigpending_and_wake(t); } } ret = specific_send_sig_info(sig, info, t); @@ -2273,7 +2285,7 @@ int do_sigaction(int sig, struct k_sigaction *act, struct k_sigaction *oact) rm_from_queue_full(&mask, &t->signal->shared_pending); do { rm_from_queue_full(&mask, &t->pending); - recalc_sigpending_tsk(t); + recalc_sigpending_and_wake(t); t = next_thread(t); } while (t != current); } diff --git a/kernel/sysctl.c b/kernel/sysctl.c index 4073353abd4f8d..30ee462ee79f86 100644 --- a/kernel/sysctl.c +++ b/kernel/sysctl.c @@ -227,7 +227,7 @@ static ctl_table kern_table[] = { .ctl_name = KERN_CORE_PATTERN, .procname = "core_pattern", .data = core_pattern, - .maxlen = 128, + .maxlen = CORENAME_MAX_SIZE, .mode = 0644, .proc_handler = &proc_dostring, .strategy = &sysctl_string, diff --git a/kernel/time/ntp.c b/kernel/time/ntp.c index cb25649c6f505a..87aa5ff931e0aa 100644 --- a/kernel/time/ntp.c +++ b/kernel/time/ntp.c @@ -11,6 +11,8 @@ #include <linux/mm.h> #include <linux/time.h> #include <linux/timex.h> +#include <linux/jiffies.h> +#include <linux/hrtimer.h> #include <asm/div64.h> #include <asm/timex.h> diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c index eadfce2fff74c8..8001d37071f591 100644 --- a/kernel/time/tick-broadcast.c +++ b/kernel/time/tick-broadcast.c @@ -243,11 +243,18 @@ void tick_broadcast_on_off(unsigned long reason, int *oncpu) { int cpu = get_cpu(); - if (cpu == *oncpu) - tick_do_broadcast_on_off(&reason); - else - smp_call_function_single(*oncpu, tick_do_broadcast_on_off, - &reason, 1, 1); + if (!cpu_isset(*oncpu, cpu_online_map)) { + printk(KERN_ERR "tick-braodcast: ignoring broadcast for " + "offline CPU #%d\n", *oncpu); + } else { + + if (cpu == *oncpu) + tick_do_broadcast_on_off(&reason); + else + smp_call_function_single(*oncpu, + tick_do_broadcast_on_off, + &reason, 1, 1); + } put_cpu(); } diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c index 3483e6cb9549c2..52db9e3c526e5b 100644 --- a/kernel/time/tick-sched.c +++ b/kernel/time/tick-sched.c @@ -167,9 +167,15 @@ void tick_nohz_stop_sched_tick(void) goto end; cpu = smp_processor_id(); - if (unlikely(local_softirq_pending())) - printk(KERN_ERR "NOHZ: local_softirq_pending %02x\n", - local_softirq_pending()); + if (unlikely(local_softirq_pending())) { + static int ratelimit; + + if (ratelimit < 10) { + printk(KERN_ERR "NOHZ: local_softirq_pending %02x\n", + local_softirq_pending()); + ratelimit++; + } + } now = ktime_get(); /* @@ -241,6 +247,21 @@ void tick_nohz_stop_sched_tick(void) if (cpu == tick_do_timer_cpu) tick_do_timer_cpu = -1; + ts->idle_sleeps++; + + /* + * delta_jiffies >= NEXT_TIMER_MAX_DELTA signals that + * there is no timer pending or at least extremly far + * into the future (12 days for HZ=1000). In this case + * we simply stop the tick timer: + */ + if (unlikely(delta_jiffies >= NEXT_TIMER_MAX_DELTA)) { + ts->idle_expires.tv64 = KTIME_MAX; + if (ts->nohz_mode == NOHZ_MODE_HIGHRES) + hrtimer_cancel(&ts->sched_timer); + goto out; + } + /* * calculate the expiry time for the next timer wheel * timer @@ -248,7 +269,6 @@ void tick_nohz_stop_sched_tick(void) expires = ktime_add_ns(last_update, tick_period.tv64 * delta_jiffies); ts->idle_expires = expires; - ts->idle_sleeps++; if (ts->nohz_mode == NOHZ_MODE_HIGHRES) { hrtimer_start(&ts->sched_timer, expires, diff --git a/kernel/timer.c b/kernel/timer.c index 5ec5490f8d85ca..1a69705c2fb955 100644 --- a/kernel/timer.c +++ b/kernel/timer.c @@ -666,7 +666,7 @@ static inline void __run_timers(tvec_base_t *base) static unsigned long __next_timer_interrupt(tvec_base_t *base) { unsigned long timer_jiffies = base->timer_jiffies; - unsigned long expires = timer_jiffies + (LONG_MAX >> 1); + unsigned long expires = timer_jiffies + NEXT_TIMER_MAX_DELTA; int index, slot, array, found = 0; struct timer_list *nte; tvec_t *varray[4]; @@ -752,6 +752,14 @@ static unsigned long cmp_next_hrtimer_event(unsigned long now, tsdelta = ktime_to_timespec(hr_delta); delta = timespec_to_jiffies(&tsdelta); + + /* + * Limit the delta to the max value, which is checked in + * tick_nohz_stop_sched_tick(): + */ + if (delta > NEXT_TIMER_MAX_DELTA) + delta = NEXT_TIMER_MAX_DELTA; + /* * Take rounding errors in to account and make sure, that it * expires in the next tick. Otherwise we go into an endless diff --git a/kernel/workqueue.c b/kernel/workqueue.c index fb56fedd5c0274..3bebf73be97659 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -47,7 +47,6 @@ struct cpu_workqueue_struct { struct workqueue_struct *wq; struct task_struct *thread; - int should_stop; int run_depth; /* Detect run_workqueue() recursion depth */ } ____cacheline_aligned; @@ -71,7 +70,13 @@ static LIST_HEAD(workqueues); static int singlethread_cpu __read_mostly; static cpumask_t cpu_singlethread_map __read_mostly; -/* optimization, we could use cpu_possible_map */ +/* + * _cpu_down() first removes CPU from cpu_online_map, then CPU_DEAD + * flushes cwq->worklist. This means that flush_workqueue/wait_on_work + * which comes in between can't use for_each_online_cpu(). We could + * use cpu_possible_map, the cpumask below is more a documentation + * than optimization. + */ static cpumask_t cpu_populated_map __read_mostly; /* If it's single threaded, it isn't in the list of workqueues. */ @@ -272,24 +277,6 @@ static void run_workqueue(struct cpu_workqueue_struct *cwq) spin_unlock_irq(&cwq->lock); } -/* - * NOTE: the caller must not touch *cwq if this func returns true - */ -static int cwq_should_stop(struct cpu_workqueue_struct *cwq) -{ - int should_stop = cwq->should_stop; - - if (unlikely(should_stop)) { - spin_lock_irq(&cwq->lock); - should_stop = cwq->should_stop && list_empty(&cwq->worklist); - if (should_stop) - cwq->thread = NULL; - spin_unlock_irq(&cwq->lock); - } - - return should_stop; -} - static int worker_thread(void *__cwq) { struct cpu_workqueue_struct *cwq = __cwq; @@ -302,14 +289,15 @@ static int worker_thread(void *__cwq) for (;;) { prepare_to_wait(&cwq->more_work, &wait, TASK_INTERRUPTIBLE); - if (!freezing(current) && !cwq->should_stop - && list_empty(&cwq->worklist)) + if (!freezing(current) && + !kthread_should_stop() && + list_empty(&cwq->worklist)) schedule(); finish_wait(&cwq->more_work, &wait); try_to_freeze(); - if (cwq_should_stop(cwq)) + if (kthread_should_stop()) break; run_workqueue(cwq); @@ -340,18 +328,21 @@ static void insert_wq_barrier(struct cpu_workqueue_struct *cwq, insert_work(cwq, &barr->work, tail); } -static void flush_cpu_workqueue(struct cpu_workqueue_struct *cwq) +static int flush_cpu_workqueue(struct cpu_workqueue_struct *cwq) { + int active; + if (cwq->thread == current) { /* * Probably keventd trying to flush its own queue. So simply run * it by hand rather than deadlocking. */ run_workqueue(cwq); + active = 1; } else { struct wq_barrier barr; - int active = 0; + active = 0; spin_lock_irq(&cwq->lock); if (!list_empty(&cwq->worklist) || cwq->current_work != NULL) { insert_wq_barrier(cwq, &barr, 1); @@ -362,6 +353,8 @@ static void flush_cpu_workqueue(struct cpu_workqueue_struct *cwq) if (active) wait_for_completion(&barr.done); } + + return active; } /** @@ -674,7 +667,6 @@ static int create_workqueue_thread(struct cpu_workqueue_struct *cwq, int cpu) return PTR_ERR(p); cwq->thread = p; - cwq->should_stop = 0; return 0; } @@ -740,29 +732,27 @@ EXPORT_SYMBOL_GPL(__create_workqueue); static void cleanup_workqueue_thread(struct cpu_workqueue_struct *cwq, int cpu) { - struct wq_barrier barr; - int alive = 0; - - spin_lock_irq(&cwq->lock); - if (cwq->thread != NULL) { - insert_wq_barrier(cwq, &barr, 1); - cwq->should_stop = 1; - alive = 1; - } - spin_unlock_irq(&cwq->lock); + /* + * Our caller is either destroy_workqueue() or CPU_DEAD, + * workqueue_mutex protects cwq->thread + */ + if (cwq->thread == NULL) + return; - if (alive) { - wait_for_completion(&barr.done); + /* + * If the caller is CPU_DEAD the single flush_cpu_workqueue() + * is not enough, a concurrent flush_workqueue() can insert a + * barrier after us. + * When ->worklist becomes empty it is safe to exit because no + * more work_structs can be queued on this cwq: flush_workqueue + * checks list_empty(), and a "normal" queue_work() can't use + * a dead CPU. + */ + while (flush_cpu_workqueue(cwq)) + ; - while (unlikely(cwq->thread != NULL)) - cpu_relax(); - /* - * Wait until cwq->thread unlocks cwq->lock, - * it won't touch *cwq after that. - */ - smp_rmb(); - spin_unlock_wait(&cwq->lock); - } + kthread_stop(cwq->thread); + cwq->thread = NULL; } /** diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index fbc5c622acb05d..1ba77ca7d1658e 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -378,14 +378,13 @@ config FORCED_INLINING config RCU_TORTURE_TEST tristate "torture tests for RCU" depends on DEBUG_KERNEL + depends on m default n help This option provides a kernel module that runs torture tests on the RCU infrastructure. The kernel module may be built after the fact on the running kernel to be tested, if desired. - Say Y here if you want RCU torture tests to start automatically - at boot time (you probably don't). Say M if you want the RCU torture tests to build as a module. Say N if you are unsure. diff --git a/lib/ioremap.c b/lib/ioremap.c index a9e4415b02dcca..760521417b6967 100644 --- a/lib/ioremap.c +++ b/lib/ioremap.c @@ -7,7 +7,7 @@ */ #include <linux/vmalloc.h> #include <linux/mm.h> - +#include <linux/sched.h> #include <asm/cacheflush.h> #include <asm/pgtable.h> diff --git a/mm/filemap.c b/mm/filemap.c index 7b48b2ad00e773..edb1b0b5cc8dc6 100644 --- a/mm/filemap.c +++ b/mm/filemap.c @@ -670,7 +670,8 @@ repeat: page = find_lock_page(mapping, index); if (!page) { if (!cached_page) { - cached_page = alloc_page(gfp_mask); + cached_page = + __page_cache_alloc(gfp_mask); if (!cached_page) return NULL; } diff --git a/mm/filemap_xip.c b/mm/filemap_xip.c index 1b49dab9b25d5d..fa360e566d8881 100644 --- a/mm/filemap_xip.c +++ b/mm/filemap_xip.c @@ -13,6 +13,7 @@ #include <linux/module.h> #include <linux/uio.h> #include <linux/rmap.h> +#include <linux/sched.h> #include <asm/tlbflush.h> #include "filemap.h" diff --git a/mm/madvise.c b/mm/madvise.c index e75096b5a6d3eb..60542d006ec16b 100644 --- a/mm/madvise.c +++ b/mm/madvise.c @@ -10,6 +10,7 @@ #include <linux/syscalls.h> #include <linux/mempolicy.h> #include <linux/hugetlb.h> +#include <linux/sched.h> /* * Any behaviour which results in changes to the vma->vm_flags needs to diff --git a/mm/memory.c b/mm/memory.c index 1d647ab0ee72d0..cb94488ab96dad 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -481,7 +481,7 @@ copy_one_pte(struct mm_struct *dst_mm, struct mm_struct *src_mm, page = vm_normal_page(vma, addr, pte); if (page) { get_page(page); - page_dup_rmap(page); + page_dup_rmap(page, vma, addr); rss[!!PageAnon(page)]++; } diff --git a/mm/mlock.c b/mm/mlock.c index 3446b7ef731e6c..4d3fea267e0dab 100644 --- a/mm/mlock.c +++ b/mm/mlock.c @@ -10,7 +10,18 @@ #include <linux/mm.h> #include <linux/mempolicy.h> #include <linux/syscalls.h> +#include <linux/sched.h> +#include <linux/module.h> +int can_do_mlock(void) +{ + if (capable(CAP_IPC_LOCK)) + return 1; + if (current->signal->rlim[RLIMIT_MEMLOCK].rlim_cur != 0) + return 1; + return 0; +} +EXPORT_SYMBOL(can_do_mlock); static int mlock_fixup(struct vm_area_struct *vma, struct vm_area_struct **prev, unsigned long start, unsigned long end, unsigned int newflags) diff --git a/mm/msync.c b/mm/msync.c index 358d73cf7b7894..144a7570535d2b 100644 --- a/mm/msync.c +++ b/mm/msync.c @@ -12,6 +12,7 @@ #include <linux/mman.h> #include <linux/file.h> #include <linux/syscalls.h> +#include <linux/sched.h> /* * MS_SYNC syncs the entire file - including mappings. diff --git a/mm/page_alloc.c b/mm/page_alloc.c index ae96dd8444323e..d8970623c566ba 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -136,6 +136,11 @@ static unsigned long __meminitdata dma_reserve; #endif /* CONFIG_MEMORY_HOTPLUG_RESERVE */ #endif /* CONFIG_ARCH_POPULATES_NODE_MAP */ +#if MAX_NUMNODES > 1 +int nr_node_ids __read_mostly = MAX_NUMNODES; +EXPORT_SYMBOL(nr_node_ids); +#endif + #ifdef CONFIG_DEBUG_VM static int page_outside_zone_boundaries(struct zone *zone, struct page *page) { @@ -669,26 +674,6 @@ static int rmqueue_bulk(struct zone *zone, unsigned int order, return i; } -#if MAX_NUMNODES > 1 -int nr_node_ids __read_mostly = MAX_NUMNODES; -EXPORT_SYMBOL(nr_node_ids); - -/* - * Figure out the number of possible node ids. - */ -static void __init setup_nr_node_ids(void) -{ - unsigned int node; - unsigned int highest = 0; - - for_each_node_mask(node, node_possible_map) - highest = node; - nr_node_ids = highest + 1; -} -#else -static void __init setup_nr_node_ids(void) {} -#endif - #ifdef CONFIG_NUMA /* * Called from the vmstat counter updater to drain pagesets of this @@ -2165,7 +2150,7 @@ void __init setup_per_cpu_pageset(void) #endif -static __meminit noinline +static noinline __init_refok int zone_wait_table_init(struct zone *zone, unsigned long zone_size_pages) { int i; @@ -2678,7 +2663,7 @@ static void __meminit free_area_init_core(struct pglist_data *pgdat, } } -static void __meminit alloc_node_mem_map(struct pglist_data *pgdat) +static void __init_refok alloc_node_mem_map(struct pglist_data *pgdat) { /* Skip empty nodes */ if (!pgdat->node_spanned_pages) @@ -2733,6 +2718,26 @@ void __meminit free_area_init_node(int nid, struct pglist_data *pgdat, } #ifdef CONFIG_ARCH_POPULATES_NODE_MAP + +#if MAX_NUMNODES > 1 +/* + * Figure out the number of possible node ids. + */ +static void __init setup_nr_node_ids(void) +{ + unsigned int node; + unsigned int highest = 0; + + for_each_node_mask(node, node_possible_map) + highest = node; + nr_node_ids = highest + 1; +} +#else +static inline void setup_nr_node_ids(void) +{ +} +#endif + /** * add_active_range - Register a range of PFNs backed by physical memory * @nid: The node ID the range resides on diff --git a/mm/rmap.c b/mm/rmap.c index 304f51985c7850..850165d32b7a18 100644 --- a/mm/rmap.c +++ b/mm/rmap.c @@ -162,12 +162,10 @@ void anon_vma_unlink(struct vm_area_struct *vma) static void anon_vma_ctor(void *data, struct kmem_cache *cachep, unsigned long flags) { - if (flags & SLAB_CTOR_CONSTRUCTOR) { - struct anon_vma *anon_vma = data; + struct anon_vma *anon_vma = data; - spin_lock_init(&anon_vma->lock); - INIT_LIST_HEAD(&anon_vma->head); - } + spin_lock_init(&anon_vma->lock); + INIT_LIST_HEAD(&anon_vma->head); } void __init anon_vma_init(void) @@ -532,19 +530,51 @@ static void __page_set_anon_rmap(struct page *page, } /** + * page_set_anon_rmap - sanity check anonymous rmap addition + * @page: the page to add the mapping to + * @vma: the vm area in which the mapping is added + * @address: the user virtual address mapped + */ +static void __page_check_anon_rmap(struct page *page, + struct vm_area_struct *vma, unsigned long address) +{ +#ifdef CONFIG_DEBUG_VM + /* + * The page's anon-rmap details (mapping and index) are guaranteed to + * be set up correctly at this point. + * + * We have exclusion against page_add_anon_rmap because the caller + * always holds the page locked, except if called from page_dup_rmap, + * in which case the page is already known to be setup. + * + * We have exclusion against page_add_new_anon_rmap because those pages + * are initially only visible via the pagetables, and the pte is locked + * over the call to page_add_new_anon_rmap. + */ + struct anon_vma *anon_vma = vma->anon_vma; + anon_vma = (void *) anon_vma + PAGE_MAPPING_ANON; + BUG_ON(page->mapping != (struct address_space *)anon_vma); + BUG_ON(page->index != linear_page_index(vma, address)); +#endif +} + +/** * page_add_anon_rmap - add pte mapping to an anonymous page * @page: the page to add the mapping to * @vma: the vm area in which the mapping is added * @address: the user virtual address mapped * - * The caller needs to hold the pte lock. + * The caller needs to hold the pte lock and the page must be locked. */ void page_add_anon_rmap(struct page *page, struct vm_area_struct *vma, unsigned long address) { + VM_BUG_ON(!PageLocked(page)); + VM_BUG_ON(address < vma->vm_start || address >= vma->vm_end); if (atomic_inc_and_test(&page->_mapcount)) __page_set_anon_rmap(page, vma, address); - /* else checking page index and mapping is racy */ + else + __page_check_anon_rmap(page, vma, address); } /* @@ -555,10 +585,12 @@ void page_add_anon_rmap(struct page *page, * * Same as page_add_anon_rmap but must only be called on *new* pages. * This means the inc-and-test can be bypassed. + * Page does not have to be locked. */ void page_add_new_anon_rmap(struct page *page, struct vm_area_struct *vma, unsigned long address) { + BUG_ON(address < vma->vm_start || address >= vma->vm_end); atomic_set(&page->_mapcount, 0); /* elevate count by 1 (starts at -1) */ __page_set_anon_rmap(page, vma, address); } @@ -575,6 +607,26 @@ void page_add_file_rmap(struct page *page) __inc_zone_page_state(page, NR_FILE_MAPPED); } +#ifdef CONFIG_DEBUG_VM +/** + * page_dup_rmap - duplicate pte mapping to a page + * @page: the page to add the mapping to + * + * For copy_page_range only: minimal extract from page_add_file_rmap / + * page_add_anon_rmap, avoiding unnecessary tests (already checked) so it's + * quicker. + * + * The caller needs to hold the pte lock. + */ +void page_dup_rmap(struct page *page, struct vm_area_struct *vma, unsigned long address) +{ + BUG_ON(page_mapcount(page) == 0); + if (PageAnon(page)) + __page_check_anon_rmap(page, vma, address); + atomic_inc(&page->_mapcount); +} +#endif + /** * page_remove_rmap - take down pte mapping from a page * @page: page to remove mapping from diff --git a/mm/shmem.c b/mm/shmem.c index f01e8deed645b6..e537317bec4d5d 100644 --- a/mm/shmem.c +++ b/mm/shmem.c @@ -2358,13 +2358,11 @@ static void init_once(void *foo, struct kmem_cache *cachep, { struct shmem_inode_info *p = (struct shmem_inode_info *) foo; - if (flags & SLAB_CTOR_CONSTRUCTOR) { - inode_init_once(&p->vfs_inode); + inode_init_once(&p->vfs_inode); #ifdef CONFIG_TMPFS_POSIX_ACL - p->i_acl = NULL; - p->i_default_acl = NULL; + p->i_acl = NULL; + p->i_default_acl = NULL; #endif - } } static int init_inodecache(void) diff --git a/mm/slab.c b/mm/slab.c index 944b20581f8c42..2e71a328aa0954 100644 --- a/mm/slab.c +++ b/mm/slab.c @@ -409,9 +409,6 @@ struct kmem_cache { /* constructor func */ void (*ctor) (void *, struct kmem_cache *, unsigned long); - /* de-constructor func */ - void (*dtor) (void *, struct kmem_cache *, unsigned long); - /* 5) cache creation/removal */ const char *name; struct list_head next; @@ -572,21 +569,6 @@ static void **dbg_userword(struct kmem_cache *cachep, void *objp) #endif /* - * Maximum size of an obj (in 2^order pages) and absolute limit for the gfp - * order. - */ -#if defined(CONFIG_LARGE_ALLOCS) -#define MAX_OBJ_ORDER 13 /* up to 32Mb */ -#define MAX_GFP_ORDER 13 /* up to 32Mb */ -#elif defined(CONFIG_MMU) -#define MAX_OBJ_ORDER 5 /* 32 pages */ -#define MAX_GFP_ORDER 5 /* 32 pages */ -#else -#define MAX_OBJ_ORDER 8 /* up to 1Mb */ -#define MAX_GFP_ORDER 8 /* up to 1Mb */ -#endif - -/* * Do not go above this order unless 0 objects fit into the slab. */ #define BREAK_GFP_ORDER_HI 1 @@ -792,6 +774,7 @@ static inline struct kmem_cache *__find_general_cachep(size_t size, */ BUG_ON(malloc_sizes[INDEX_AC].cs_cachep == NULL); #endif + WARN_ON_ONCE(size == 0); while (size > csizep->cs_size) csizep++; @@ -1911,20 +1894,11 @@ static void slab_destroy_objs(struct kmem_cache *cachep, struct slab *slabp) slab_error(cachep, "end of a freed object " "was overwritten"); } - if (cachep->dtor && !(cachep->flags & SLAB_POISON)) - (cachep->dtor) (objp + obj_offset(cachep), cachep, 0); } } #else static void slab_destroy_objs(struct kmem_cache *cachep, struct slab *slabp) { - if (cachep->dtor) { - int i; - for (i = 0; i < cachep->num; i++) { - void *objp = index_to_obj(cachep, slabp, i); - (cachep->dtor) (objp, cachep, 0); - } - } } #endif @@ -2013,7 +1987,7 @@ static size_t calculate_slab_order(struct kmem_cache *cachep, size_t left_over = 0; int gfporder; - for (gfporder = 0; gfporder <= MAX_GFP_ORDER; gfporder++) { + for (gfporder = 0; gfporder <= KMALLOC_MAX_ORDER; gfporder++) { unsigned int num; size_t remainder; @@ -2063,7 +2037,7 @@ static size_t calculate_slab_order(struct kmem_cache *cachep, return left_over; } -static int setup_cpu_cache(struct kmem_cache *cachep) +static int __init_refok setup_cpu_cache(struct kmem_cache *cachep) { if (g_cpucache_up == FULL) return enable_cpucache(cachep); @@ -2124,7 +2098,7 @@ static int setup_cpu_cache(struct kmem_cache *cachep) * @align: The required alignment for the objects. * @flags: SLAB flags * @ctor: A constructor for the objects. - * @dtor: A destructor for the objects. + * @dtor: A destructor for the objects (not implemented anymore). * * Returns a ptr to the cache on success, NULL on failure. * Cannot be called within a int, but can be interrupted. @@ -2159,7 +2133,7 @@ kmem_cache_create (const char *name, size_t size, size_t align, * Sanity checks... these are all serious usage bugs. */ if (!name || in_interrupt() || (size < BYTES_PER_WORD) || - (size > (1 << MAX_OBJ_ORDER) * PAGE_SIZE) || (dtor && !ctor)) { + size > KMALLOC_MAX_SIZE || dtor) { printk(KERN_ERR "%s: Early error in slab %s\n", __FUNCTION__, name); BUG(); @@ -2213,9 +2187,6 @@ kmem_cache_create (const char *name, size_t size, size_t align, if (flags & SLAB_DESTROY_BY_RCU) BUG_ON(flags & SLAB_POISON); #endif - if (flags & SLAB_DESTROY_BY_RCU) - BUG_ON(dtor); - /* * Always checks flags, a caller might be expecting debug support which * isn't available. @@ -2370,7 +2341,6 @@ kmem_cache_create (const char *name, size_t size, size_t align, BUG_ON(!cachep->slabp_cache); } cachep->ctor = ctor; - cachep->dtor = dtor; cachep->name = name; if (setup_cpu_cache(cachep)) { @@ -2625,7 +2595,7 @@ static inline kmem_bufctl_t *slab_bufctl(struct slab *slabp) } static void cache_init_objs(struct kmem_cache *cachep, - struct slab *slabp, unsigned long ctor_flags) + struct slab *slabp) { int i; @@ -2649,7 +2619,7 @@ static void cache_init_objs(struct kmem_cache *cachep, */ if (cachep->ctor && !(cachep->flags & SLAB_POISON)) cachep->ctor(objp + obj_offset(cachep), cachep, - ctor_flags); + 0); if (cachep->flags & SLAB_RED_ZONE) { if (*dbg_redzone2(cachep, objp) != RED_INACTIVE) @@ -2665,7 +2635,7 @@ static void cache_init_objs(struct kmem_cache *cachep, cachep->buffer_size / PAGE_SIZE, 0); #else if (cachep->ctor) - cachep->ctor(objp, cachep, ctor_flags); + cachep->ctor(objp, cachep, 0); #endif slab_bufctl(slabp)[i] = i + 1; } @@ -2754,7 +2724,6 @@ static int cache_grow(struct kmem_cache *cachep, struct slab *slabp; size_t offset; gfp_t local_flags; - unsigned long ctor_flags; struct kmem_list3 *l3; /* @@ -2763,7 +2732,6 @@ static int cache_grow(struct kmem_cache *cachep, */ BUG_ON(flags & ~(GFP_DMA | GFP_LEVEL_MASK)); - ctor_flags = SLAB_CTOR_CONSTRUCTOR; local_flags = (flags & GFP_LEVEL_MASK); /* Take the l3 list lock to change the colour_next on this node */ check_irq_off(); @@ -2808,7 +2776,7 @@ static int cache_grow(struct kmem_cache *cachep, slabp->nodeid = nodeid; slab_map_pages(cachep, slabp, objp); - cache_init_objs(cachep, slabp, ctor_flags); + cache_init_objs(cachep, slabp); if (local_flags & __GFP_WAIT) local_irq_disable(); @@ -2835,7 +2803,6 @@ failed: * Perform extra freeing checks: * - detect bad pointers. * - POISON/RED_ZONE checking - * - destructor calls, for caches with POISON+dtor */ static void kfree_debugcheck(const void *objp) { @@ -2894,12 +2861,6 @@ static void *cache_free_debugcheck(struct kmem_cache *cachep, void *objp, BUG_ON(objnr >= cachep->num); BUG_ON(objp != index_to_obj(cachep, slabp, objnr)); - if (cachep->flags & SLAB_POISON && cachep->dtor) { - /* we want to cache poison the object, - * call the destruction callback - */ - cachep->dtor(objp + obj_offset(cachep), cachep, 0); - } #ifdef CONFIG_DEBUG_SLAB_LEAK slab_bufctl(slabp)[objnr] = BUFCTL_FREE; #endif @@ -3099,7 +3060,7 @@ static void *cache_alloc_debugcheck_after(struct kmem_cache *cachep, #endif objp += obj_offset(cachep); if (cachep->ctor && cachep->flags & SLAB_POISON) - cachep->ctor(objp, cachep, SLAB_CTOR_CONSTRUCTOR); + cachep->ctor(objp, cachep, 0); #if ARCH_SLAB_MINALIGN if ((u32)objp & (ARCH_SLAB_MINALIGN-1)) { printk(KERN_ERR "0x%p: not aligned to ARCH_SLAB_MINALIGN=%d\n", diff --git a/mm/slob.c b/mm/slob.c index c6933bc19bcd8b..71976c5d40d301 100644 --- a/mm/slob.c +++ b/mm/slob.c @@ -35,6 +35,7 @@ #include <linux/init.h> #include <linux/module.h> #include <linux/timer.h> +#include <linux/rcupdate.h> struct slob_block { int units; @@ -53,6 +54,16 @@ struct bigblock { }; typedef struct bigblock bigblock_t; +/* + * struct slob_rcu is inserted at the tail of allocated slob blocks, which + * were created with a SLAB_DESTROY_BY_RCU slab. slob_rcu is used to free + * the block using call_rcu. + */ +struct slob_rcu { + struct rcu_head head; + int size; +}; + static slob_t arena = { .next = &arena, .units = 1 }; static slob_t *slobfree = &arena; static bigblock_t *bigblocks; @@ -266,9 +277,9 @@ size_t ksize(const void *block) struct kmem_cache { unsigned int size, align; + unsigned long flags; const char *name; void (*ctor)(void *, struct kmem_cache *, unsigned long); - void (*dtor)(void *, struct kmem_cache *, unsigned long); }; struct kmem_cache *kmem_cache_create(const char *name, size_t size, @@ -283,8 +294,12 @@ struct kmem_cache *kmem_cache_create(const char *name, size_t size, if (c) { c->name = name; c->size = size; + if (flags & SLAB_DESTROY_BY_RCU) { + /* leave room for rcu footer at the end of object */ + c->size += sizeof(struct slob_rcu); + } + c->flags = flags; c->ctor = ctor; - c->dtor = dtor; /* ignore alignment unless it's forced */ c->align = (flags & SLAB_HWCACHE_ALIGN) ? SLOB_ALIGN : 0; if (c->align < align) @@ -312,7 +327,7 @@ void *kmem_cache_alloc(struct kmem_cache *c, gfp_t flags) b = (void *)__get_free_pages(flags, get_order(c->size)); if (c->ctor) - c->ctor(b, c, SLAB_CTOR_CONSTRUCTOR); + c->ctor(b, c, 0); return b; } @@ -328,15 +343,33 @@ void *kmem_cache_zalloc(struct kmem_cache *c, gfp_t flags) } EXPORT_SYMBOL(kmem_cache_zalloc); -void kmem_cache_free(struct kmem_cache *c, void *b) +static void __kmem_cache_free(void *b, int size) { - if (c->dtor) - c->dtor(b, c, 0); - - if (c->size < PAGE_SIZE) - slob_free(b, c->size); + if (size < PAGE_SIZE) + slob_free(b, size); else - free_pages((unsigned long)b, get_order(c->size)); + free_pages((unsigned long)b, get_order(size)); +} + +static void kmem_rcu_free(struct rcu_head *head) +{ + struct slob_rcu *slob_rcu = (struct slob_rcu *)head; + void *b = (void *)slob_rcu - (slob_rcu->size - sizeof(struct slob_rcu)); + + __kmem_cache_free(b, slob_rcu->size); +} + +void kmem_cache_free(struct kmem_cache *c, void *b) +{ + if (unlikely(c->flags & SLAB_DESTROY_BY_RCU)) { + struct slob_rcu *slob_rcu; + slob_rcu = b + (c->size - sizeof(struct slob_rcu)); + INIT_RCU_HEAD(&slob_rcu->head); + slob_rcu->size = c->size; + call_rcu(&slob_rcu->head, kmem_rcu_free); + } else { + __kmem_cache_free(b, c->size); + } } EXPORT_SYMBOL(kmem_cache_free); diff --git a/mm/slub.c b/mm/slub.c index b39c8a69a4ff4f..3e5aefcb4075d9 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -78,10 +78,18 @@ * * Overloading of page flags that are otherwise used for LRU management. * - * PageActive The slab is used as a cpu cache. Allocations - * may be performed from the slab. The slab is not - * on any slab list and cannot be moved onto one. - * The cpu slab may be equipped with an additioanl + * PageActive The slab is frozen and exempt from list processing. + * This means that the slab is dedicated to a purpose + * such as satisfying allocations for a specific + * processor. Objects may be freed in the slab while + * it is frozen but slab_free will then skip the usual + * list operations. It is up to the processor holding + * the slab to integrate the slab into the slab lists + * when the slab is no longer needed. + * + * One use of this flag is to mark slabs that are + * used for allocations. Then such a slab becomes a cpu + * slab. The cpu slab may be equipped with an additional * lockless_freelist that allows lockless access to * free objects in addition to the regular freelist * that requires the slab lock. @@ -91,27 +99,42 @@ * the fast path and disables lockless freelists. */ -static inline int SlabDebug(struct page *page) -{ +#define FROZEN (1 << PG_active) + #ifdef CONFIG_SLUB_DEBUG - return PageError(page); +#define SLABDEBUG (1 << PG_error) #else - return 0; +#define SLABDEBUG 0 #endif + +static inline int SlabFrozen(struct page *page) +{ + return page->flags & FROZEN; +} + +static inline void SetSlabFrozen(struct page *page) +{ + page->flags |= FROZEN; +} + +static inline void ClearSlabFrozen(struct page *page) +{ + page->flags &= ~FROZEN; +} + +static inline int SlabDebug(struct page *page) +{ + return page->flags & SLABDEBUG; } static inline void SetSlabDebug(struct page *page) { -#ifdef CONFIG_SLUB_DEBUG - SetPageError(page); -#endif + page->flags |= SLABDEBUG; } static inline void ClearSlabDebug(struct page *page) { -#ifdef CONFIG_SLUB_DEBUG - ClearPageError(page); -#endif + page->flags &= ~SLABDEBUG; } /* @@ -719,6 +742,22 @@ static int on_freelist(struct kmem_cache *s, struct page *page, void *search) return search == NULL; } +static void trace(struct kmem_cache *s, struct page *page, void *object, int alloc) +{ + if (s->flags & SLAB_TRACE) { + printk(KERN_INFO "TRACE %s %s 0x%p inuse=%d fp=0x%p\n", + s->name, + alloc ? "alloc" : "free", + object, page->inuse, + page->freelist); + + if (!alloc) + print_section("Object", (void *)object, s->objsize); + + dump_stack(); + } +} + /* * Tracking of fully allocated slabs for debugging purposes. */ @@ -743,8 +782,18 @@ static void remove_full(struct kmem_cache *s, struct page *page) spin_unlock(&n->list_lock); } -static int alloc_object_checks(struct kmem_cache *s, struct page *page, - void *object) +static void setup_object_debug(struct kmem_cache *s, struct page *page, + void *object) +{ + if (!(s->flags & (SLAB_STORE_USER|SLAB_RED_ZONE|__OBJECT_POISON))) + return; + + init_object(s, object, 0); + init_tracking(s, object); +} + +static int alloc_debug_processing(struct kmem_cache *s, struct page *page, + void *object, void *addr) { if (!check_slab(s, page)) goto bad; @@ -759,13 +808,16 @@ static int alloc_object_checks(struct kmem_cache *s, struct page *page, goto bad; } - if (!object) - return 1; - - if (!check_object(s, page, object, 0)) + if (object && !check_object(s, page, object, 0)) goto bad; + /* Success perform special debug activities for allocs */ + if (s->flags & SLAB_STORE_USER) + set_track(s, object, TRACK_ALLOC, addr); + trace(s, page, object, 1); + init_object(s, object, 1); return 1; + bad: if (PageSlab(page)) { /* @@ -783,8 +835,8 @@ bad: return 0; } -static int free_object_checks(struct kmem_cache *s, struct page *page, - void *object) +static int free_debug_processing(struct kmem_cache *s, struct page *page, + void *object, void *addr) { if (!check_slab(s, page)) goto fail; @@ -818,29 +870,22 @@ static int free_object_checks(struct kmem_cache *s, struct page *page, "to slab %s", object, page->slab->name); goto fail; } + + /* Special debug activities for freeing objects */ + if (!SlabFrozen(page) && !page->freelist) + remove_full(s, page); + if (s->flags & SLAB_STORE_USER) + set_track(s, object, TRACK_FREE, addr); + trace(s, page, object, 0); + init_object(s, object, 0); return 1; + fail: printk(KERN_ERR "@@@ SLUB: %s slab 0x%p object at 0x%p not freed.\n", s->name, page, object); return 0; } -static void trace(struct kmem_cache *s, struct page *page, void *object, int alloc) -{ - if (s->flags & SLAB_TRACE) { - printk(KERN_INFO "TRACE %s %s 0x%p inuse=%d fp=0x%p\n", - s->name, - alloc ? "alloc" : "free", - object, page->inuse, - page->freelist); - - if (!alloc) - print_section("Object", (void *)object, s->objsize); - - dump_stack(); - } -} - static int __init setup_slub_debug(char *str) { if (!str || *str != '=') @@ -891,13 +936,13 @@ static void kmem_cache_open_debug_check(struct kmem_cache *s) * On 32 bit platforms the limit is 256k. On 64bit platforms * the limit is 512k. * - * Debugging or ctor/dtors may create a need to move the free + * Debugging or ctor may create a need to move the free * pointer. Fail if this happens. */ - if (s->size >= 65535 * sizeof(void *)) { + if (s->objsize >= 65535 * sizeof(void *)) { BUG_ON(s->flags & (SLAB_RED_ZONE | SLAB_POISON | SLAB_STORE_USER | SLAB_DESTROY_BY_RCU)); - BUG_ON(s->ctor || s->dtor); + BUG_ON(s->ctor); } else /* @@ -909,26 +954,20 @@ static void kmem_cache_open_debug_check(struct kmem_cache *s) s->flags |= slub_debug; } #else +static inline void setup_object_debug(struct kmem_cache *s, + struct page *page, void *object) {} -static inline int alloc_object_checks(struct kmem_cache *s, - struct page *page, void *object) { return 0; } +static inline int alloc_debug_processing(struct kmem_cache *s, + struct page *page, void *object, void *addr) { return 0; } -static inline int free_object_checks(struct kmem_cache *s, - struct page *page, void *object) { return 0; } +static inline int free_debug_processing(struct kmem_cache *s, + struct page *page, void *object, void *addr) { return 0; } -static inline void add_full(struct kmem_cache_node *n, struct page *page) {} -static inline void remove_full(struct kmem_cache *s, struct page *page) {} -static inline void trace(struct kmem_cache *s, struct page *page, - void *object, int alloc) {} -static inline void init_object(struct kmem_cache *s, - void *object, int active) {} -static inline void init_tracking(struct kmem_cache *s, void *object) {} static inline int slab_pad_check(struct kmem_cache *s, struct page *page) { return 1; } static inline int check_object(struct kmem_cache *s, struct page *page, void *object, int active) { return 1; } -static inline void set_track(struct kmem_cache *s, void *object, - enum track_item alloc, void *addr) {} +static inline void add_full(struct kmem_cache_node *n, struct page *page) {} static inline void kmem_cache_open_debug_check(struct kmem_cache *s) {} #define slub_debug 0 #endif @@ -965,13 +1004,9 @@ static struct page *allocate_slab(struct kmem_cache *s, gfp_t flags, int node) static void setup_object(struct kmem_cache *s, struct page *page, void *object) { - if (SlabDebug(page)) { - init_object(s, object, 0); - init_tracking(s, object); - } - + setup_object_debug(s, page, object); if (unlikely(s->ctor)) - s->ctor(object, s, SLAB_CTOR_CONSTRUCTOR); + s->ctor(object, s, 0); } static struct page *new_slab(struct kmem_cache *s, gfp_t flags, int node) @@ -1030,15 +1065,12 @@ static void __free_slab(struct kmem_cache *s, struct page *page) { int pages = 1 << s->order; - if (unlikely(SlabDebug(page) || s->dtor)) { + if (unlikely(SlabDebug(page))) { void *p; slab_pad_check(s, page); - for_each_object(p, s, page_address(page)) { - if (s->dtor) - s->dtor(p, s, 0); + for_each_object(p, s, page_address(page)) check_object(s, page, p, 0); - } } mod_zone_page_state(page_zone(page), @@ -1138,11 +1170,12 @@ static void remove_partial(struct kmem_cache *s, * * Must hold list_lock. */ -static int lock_and_del_slab(struct kmem_cache_node *n, struct page *page) +static inline int lock_and_freeze_slab(struct kmem_cache_node *n, struct page *page) { if (slab_trylock(page)) { list_del(&page->lru); n->nr_partial--; + SetSlabFrozen(page); return 1; } return 0; @@ -1166,7 +1199,7 @@ static struct page *get_partial_node(struct kmem_cache_node *n) spin_lock(&n->list_lock); list_for_each_entry(page, &n->partial, lru) - if (lock_and_del_slab(n, page)) + if (lock_and_freeze_slab(n, page)) goto out; page = NULL; out: @@ -1245,10 +1278,11 @@ static struct page *get_partial(struct kmem_cache *s, gfp_t flags, int node) * * On exit the slab lock will have been dropped. */ -static void putback_slab(struct kmem_cache *s, struct page *page) +static void unfreeze_slab(struct kmem_cache *s, struct page *page) { struct kmem_cache_node *n = get_node(s, page_to_nid(page)); + ClearSlabFrozen(page); if (page->inuse) { if (page->freelist) @@ -1299,9 +1333,7 @@ static void deactivate_slab(struct kmem_cache *s, struct page *page, int cpu) page->inuse--; } s->cpu_slab[cpu] = NULL; - ClearPageActive(page); - - putback_slab(s, page); + unfreeze_slab(s, page); } static void flush_slab(struct kmem_cache *s, struct page *page, int cpu) @@ -1392,9 +1424,7 @@ another_slab: new_slab: page = get_partial(s, gfpflags, node); if (page) { -have_slab: s->cpu_slab[cpu] = page; - SetPageActive(page); goto load_freelist; } @@ -1424,17 +1454,15 @@ have_slab: flush_slab(s, s->cpu_slab[cpu], cpu); } slab_lock(page); - goto have_slab; + SetSlabFrozen(page); + s->cpu_slab[cpu] = page; + goto load_freelist; } return NULL; debug: object = page->freelist; - if (!alloc_object_checks(s, page, object)) + if (!alloc_debug_processing(s, page, object, addr)) goto another_slab; - if (s->flags & SLAB_STORE_USER) - set_track(s, object, TRACK_ALLOC, addr); - trace(s, page, object, 1); - init_object(s, object, 1); page->inuse++; page->freelist = object[page->offset]; @@ -1511,11 +1539,7 @@ checks_ok: page->freelist = object; page->inuse--; - if (unlikely(PageActive(page))) - /* - * Cpu slabs are never on partial lists and are - * never freed. - */ + if (unlikely(SlabFrozen(page))) goto out_unlock; if (unlikely(!page->inuse)) @@ -1545,14 +1569,8 @@ slab_empty: return; debug: - if (!free_object_checks(s, page, x)) + if (!free_debug_processing(s, page, x, addr)) goto out_unlock; - if (!PageActive(page) && !page->freelist) - remove_full(s, page); - if (s->flags & SLAB_STORE_USER) - set_track(s, x, TRACK_FREE, addr); - trace(s, page, object, 0); - init_object(s, object, 0); goto checks_ok; } @@ -1789,7 +1807,7 @@ static struct kmem_cache_node * __init early_kmem_cache_node_alloc(gfp_t gfpflag page->freelist = get_freepointer(kmalloc_caches, n); page->inuse++; kmalloc_caches->node[node] = n; - init_object(kmalloc_caches, n, 1); + setup_object_debug(kmalloc_caches, page, n); init_kmem_cache_node(n); atomic_long_inc(&n->nr_slabs); add_partial(n, page); @@ -1871,7 +1889,7 @@ static int calculate_sizes(struct kmem_cache *s) * then we should never poison the object itself. */ if ((flags & SLAB_POISON) && !(flags & SLAB_DESTROY_BY_RCU) && - !s->ctor && !s->dtor) + !s->ctor) s->flags |= __OBJECT_POISON; else s->flags &= ~__OBJECT_POISON; @@ -1899,9 +1917,8 @@ static int calculate_sizes(struct kmem_cache *s) */ s->inuse = size; -#ifdef CONFIG_SLUB_DEBUG if (((flags & (SLAB_DESTROY_BY_RCU | SLAB_POISON)) || - s->ctor || s->dtor)) { + s->ctor)) { /* * Relocate free pointer after the object if it is not * permitted to overwrite the first word of the object on @@ -1914,6 +1931,7 @@ static int calculate_sizes(struct kmem_cache *s) size += sizeof(void *); } +#ifdef CONFIG_SLUB_DEBUG if (flags & SLAB_STORE_USER) /* * Need to store information about allocs and frees after @@ -1970,13 +1988,11 @@ static int calculate_sizes(struct kmem_cache *s) static int kmem_cache_open(struct kmem_cache *s, gfp_t gfpflags, const char *name, size_t size, size_t align, unsigned long flags, - void (*ctor)(void *, struct kmem_cache *, unsigned long), - void (*dtor)(void *, struct kmem_cache *, unsigned long)) + void (*ctor)(void *, struct kmem_cache *, unsigned long)) { memset(s, 0, kmem_size); s->name = name; s->ctor = ctor; - s->dtor = dtor; s->objsize = size; s->flags = flags; s->align = align; @@ -2161,7 +2177,7 @@ static struct kmem_cache *create_kmalloc_cache(struct kmem_cache *s, down_write(&slub_lock); if (!kmem_cache_open(s, gfp_flags, name, size, ARCH_KMALLOC_MINALIGN, - flags, NULL, NULL)) + flags, NULL)) goto panic; list_add(&s->list, &slab_caches); @@ -2463,7 +2479,7 @@ static int slab_unmergeable(struct kmem_cache *s) if (slub_nomerge || (s->flags & SLUB_NEVER_MERGE)) return 1; - if (s->ctor || s->dtor) + if (s->ctor) return 1; return 0; @@ -2471,15 +2487,14 @@ static int slab_unmergeable(struct kmem_cache *s) static struct kmem_cache *find_mergeable(size_t size, size_t align, unsigned long flags, - void (*ctor)(void *, struct kmem_cache *, unsigned long), - void (*dtor)(void *, struct kmem_cache *, unsigned long)) + void (*ctor)(void *, struct kmem_cache *, unsigned long)) { struct list_head *h; if (slub_nomerge || (flags & SLUB_NEVER_MERGE)) return NULL; - if (ctor || dtor) + if (ctor) return NULL; size = ALIGN(size, sizeof(void *)); @@ -2521,8 +2536,9 @@ struct kmem_cache *kmem_cache_create(const char *name, size_t size, { struct kmem_cache *s; + BUG_ON(dtor); down_write(&slub_lock); - s = find_mergeable(size, align, flags, dtor, ctor); + s = find_mergeable(size, align, flags, ctor); if (s) { s->refcount++; /* @@ -2536,7 +2552,7 @@ struct kmem_cache *kmem_cache_create(const char *name, size_t size, } else { s = kmalloc(kmem_size, GFP_KERNEL); if (s && kmem_cache_open(s, GFP_KERNEL, name, - size, align, flags, ctor, dtor)) { + size, align, flags, ctor)) { if (sysfs_slab_add(s)) { kfree(s); goto err; @@ -3177,17 +3193,6 @@ static ssize_t ctor_show(struct kmem_cache *s, char *buf) } SLAB_ATTR_RO(ctor); -static ssize_t dtor_show(struct kmem_cache *s, char *buf) -{ - if (s->dtor) { - int n = sprint_symbol(buf, (unsigned long)s->dtor); - - return n + sprintf(buf + n, "\n"); - } - return 0; -} -SLAB_ATTR_RO(dtor); - static ssize_t aliases_show(struct kmem_cache *s, char *buf) { return sprintf(buf, "%d\n", s->refcount - 1); @@ -3419,7 +3424,6 @@ static struct attribute * slab_attrs[] = { &partial_attr.attr, &cpu_slabs_attr.attr, &ctor_attr.attr, - &dtor_attr.attr, &aliases_attr.attr, &align_attr.attr, &sanity_checks_attr.attr, diff --git a/mm/sparse.c b/mm/sparse.c index 6f3fff907bc257..1302f8348d51c8 100644 --- a/mm/sparse.c +++ b/mm/sparse.c @@ -44,7 +44,7 @@ EXPORT_SYMBOL(page_to_nid); #endif #ifdef CONFIG_SPARSEMEM_EXTREME -static struct mem_section noinline *sparse_index_alloc(int nid) +static struct mem_section noinline __init_refok *sparse_index_alloc(int nid) { struct mem_section *section = NULL; unsigned long array_size = SECTIONS_PER_ROOT * diff --git a/mm/vmalloc.c b/mm/vmalloc.c index faa2a521dea321..d3a9c5368257af 100644 --- a/mm/vmalloc.c +++ b/mm/vmalloc.c @@ -311,7 +311,7 @@ struct vm_struct *remove_vm_area(void *addr) return v; } -void __vunmap(void *addr, int deallocate_pages) +static void __vunmap(void *addr, int deallocate_pages) { struct vm_struct *area; diff --git a/mm/vmstat.c b/mm/vmstat.c index 8faf27e5aa98b8..38254297a4942c 100644 --- a/mm/vmstat.c +++ b/mm/vmstat.c @@ -12,6 +12,7 @@ #include <linux/mm.h> #include <linux/module.h> #include <linux/cpu.h> +#include <linux/sched.h> #ifdef CONFIG_VM_EVENT_COUNTERS DEFINE_PER_CPU(struct vm_event_state, vm_event_states) = {{0}}; diff --git a/net/bluetooth/hci_sock.c b/net/bluetooth/hci_sock.c index bfc9a35bad3378..1dae3dfc66a9dd 100644 --- a/net/bluetooth/hci_sock.c +++ b/net/bluetooth/hci_sock.c @@ -665,7 +665,8 @@ static int hci_sock_dev_event(struct notifier_block *this, unsigned long event, /* Detach sockets from device */ read_lock(&hci_sk_list.lock); sk_for_each(sk, node, &hci_sk_list.head) { - lock_sock(sk); + local_bh_disable(); + bh_lock_sock_nested(sk); if (hci_pi(sk)->hdev == hdev) { hci_pi(sk)->hdev = NULL; sk->sk_err = EPIPE; @@ -674,7 +675,8 @@ static int hci_sock_dev_event(struct notifier_block *this, unsigned long event, hci_dev_put(hdev); } - release_sock(sk); + bh_unlock_sock(sk); + local_bh_enable(); } read_unlock(&hci_sk_list.lock); } diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c index a59b1fb63b76d8..670ff95ca64b1b 100644 --- a/net/bluetooth/l2cap.c +++ b/net/bluetooth/l2cap.c @@ -507,6 +507,7 @@ static void l2cap_sock_init(struct sock *sk, struct sock *parent) } /* Default config options */ + pi->conf_len = 0; pi->conf_mtu = L2CAP_DEFAULT_MTU; pi->flush_to = L2CAP_DEFAULT_FLUSH_TO; } @@ -1271,42 +1272,6 @@ static inline int l2cap_get_conf_opt(void **ptr, int *type, int *olen, unsigned return len; } -static inline void l2cap_parse_conf_req(struct sock *sk, void *data, int len) -{ - int type, hint, olen; - unsigned long val; - void *ptr = data; - - BT_DBG("sk %p len %d", sk, len); - - while (len >= L2CAP_CONF_OPT_SIZE) { - len -= l2cap_get_conf_opt(&ptr, &type, &olen, &val); - - hint = type & 0x80; - type &= 0x7f; - - switch (type) { - case L2CAP_CONF_MTU: - l2cap_pi(sk)->conf_mtu = val; - break; - - case L2CAP_CONF_FLUSH_TO: - l2cap_pi(sk)->flush_to = val; - break; - - case L2CAP_CONF_QOS: - break; - - default: - if (hint) - break; - - /* FIXME: Reject unknown option */ - break; - } - } -} - static void l2cap_add_conf_opt(void **ptr, u8 type, u8 len, unsigned long val) { struct l2cap_conf_opt *opt = *ptr; @@ -1358,39 +1323,75 @@ static int l2cap_build_conf_req(struct sock *sk, void *data) return ptr - data; } -static inline int l2cap_conf_output(struct sock *sk, void **ptr) +static int l2cap_parse_conf_req(struct sock *sk, void *data) { struct l2cap_pinfo *pi = l2cap_pi(sk); - int result = 0; + struct l2cap_conf_rsp *rsp = data; + void *ptr = rsp->data; + void *req = pi->conf_req; + int len = pi->conf_len; + int type, hint, olen; + unsigned long val; + u16 result = L2CAP_CONF_SUCCESS; - /* Configure output options and let the other side know - * which ones we don't like. */ - if (pi->conf_mtu < pi->omtu) - result = L2CAP_CONF_UNACCEPT; - else - pi->omtu = pi->conf_mtu; + BT_DBG("sk %p", sk); + + while (len >= L2CAP_CONF_OPT_SIZE) { + len -= l2cap_get_conf_opt(&req, &type, &olen, &val); - l2cap_add_conf_opt(ptr, L2CAP_CONF_MTU, 2, pi->omtu); + hint = type & 0x80; + type &= 0x7f; + + switch (type) { + case L2CAP_CONF_MTU: + pi->conf_mtu = val; + break; + + case L2CAP_CONF_FLUSH_TO: + pi->flush_to = val; + break; + + case L2CAP_CONF_QOS: + break; + + default: + if (hint) + break; + + result = L2CAP_CONF_UNKNOWN; + *((u8 *) ptr++) = type; + break; + } + } + + if (result == L2CAP_CONF_SUCCESS) { + /* Configure output options and let the other side know + * which ones we don't like. */ + + if (pi->conf_mtu < pi->omtu) + result = L2CAP_CONF_UNACCEPT; + else + pi->omtu = pi->conf_mtu; + + l2cap_add_conf_opt(&ptr, L2CAP_CONF_MTU, 2, pi->omtu); + } - BT_DBG("sk %p result %d", sk, result); - return result; + rsp->scid = cpu_to_le16(pi->dcid); + rsp->result = cpu_to_le16(result); + rsp->flags = cpu_to_le16(0x0000); + + return ptr - data; } -static int l2cap_build_conf_rsp(struct sock *sk, void *data, int *result) +static int l2cap_build_conf_rsp(struct sock *sk, void *data, u16 result, u16 flags) { struct l2cap_conf_rsp *rsp = data; void *ptr = rsp->data; - u16 flags = 0; - - BT_DBG("sk %p complete %d", sk, result ? 1 : 0); - if (result) - *result = l2cap_conf_output(sk, &ptr); - else - flags = 0x0001; + BT_DBG("sk %p", sk); rsp->scid = cpu_to_le16(l2cap_pi(sk)->dcid); - rsp->result = cpu_to_le16(result ? *result : 0); + rsp->result = cpu_to_le16(result); rsp->flags = cpu_to_le16(flags); return ptr - data; @@ -1535,7 +1536,7 @@ static inline int l2cap_config_req(struct l2cap_conn *conn, struct l2cap_cmd_hdr u16 dcid, flags; u8 rsp[64]; struct sock *sk; - int result; + int len; dcid = __le16_to_cpu(req->dcid); flags = __le16_to_cpu(req->flags); @@ -1548,25 +1549,40 @@ static inline int l2cap_config_req(struct l2cap_conn *conn, struct l2cap_cmd_hdr if (sk->sk_state == BT_DISCONN) goto unlock; - l2cap_parse_conf_req(sk, req->data, cmd->len - sizeof(*req)); + /* Reject if config buffer is too small. */ + len = cmd->len - sizeof(*req); + if (l2cap_pi(sk)->conf_len + len > sizeof(l2cap_pi(sk)->conf_req)) { + l2cap_send_cmd(conn, cmd->ident, L2CAP_CONF_RSP, + l2cap_build_conf_rsp(sk, rsp, + L2CAP_CONF_REJECT, flags), rsp); + goto unlock; + } + + /* Store config. */ + memcpy(l2cap_pi(sk)->conf_req + l2cap_pi(sk)->conf_len, req->data, len); + l2cap_pi(sk)->conf_len += len; if (flags & 0x0001) { /* Incomplete config. Send empty response. */ l2cap_send_cmd(conn, cmd->ident, L2CAP_CONF_RSP, - l2cap_build_conf_rsp(sk, rsp, NULL), rsp); + l2cap_build_conf_rsp(sk, rsp, + L2CAP_CONF_SUCCESS, 0x0001), rsp); goto unlock; } /* Complete config. */ - l2cap_send_cmd(conn, cmd->ident, L2CAP_CONF_RSP, - l2cap_build_conf_rsp(sk, rsp, &result), rsp); - - if (result) + len = l2cap_parse_conf_req(sk, rsp); + if (len < 0) goto unlock; - /* Output config done */ + l2cap_send_cmd(conn, cmd->ident, L2CAP_CONF_RSP, len, rsp); + + /* Output config done. */ l2cap_pi(sk)->conf_state |= L2CAP_CONF_OUTPUT_DONE; + /* Reset config buffer. */ + l2cap_pi(sk)->conf_len = 0; + if (l2cap_pi(sk)->conf_state & L2CAP_CONF_INPUT_DONE) { sk->sk_state = BT_CONNECTED; l2cap_chan_ready(sk); diff --git a/net/core/dev.c b/net/core/dev.c index 8301e2ac747fcf..5a7f20f7857468 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -116,6 +116,7 @@ #include <linux/dmaengine.h> #include <linux/err.h> #include <linux/ctype.h> +#include <linux/if_arp.h> /* * The list of packet types we will receive (as opposed to discard) @@ -217,6 +218,73 @@ extern void netdev_unregister_sysfs(struct net_device *); #define netdev_unregister_sysfs(dev) do { } while(0) #endif +#ifdef CONFIG_DEBUG_LOCK_ALLOC +/* + * register_netdevice() inits dev->_xmit_lock and sets lockdep class + * according to dev->type + */ +static const unsigned short netdev_lock_type[] = + {ARPHRD_NETROM, ARPHRD_ETHER, ARPHRD_EETHER, ARPHRD_AX25, + ARPHRD_PRONET, ARPHRD_CHAOS, ARPHRD_IEEE802, ARPHRD_ARCNET, + ARPHRD_APPLETLK, ARPHRD_DLCI, ARPHRD_ATM, ARPHRD_METRICOM, + ARPHRD_IEEE1394, ARPHRD_EUI64, ARPHRD_INFINIBAND, ARPHRD_SLIP, + ARPHRD_CSLIP, ARPHRD_SLIP6, ARPHRD_CSLIP6, ARPHRD_RSRVD, + ARPHRD_ADAPT, ARPHRD_ROSE, ARPHRD_X25, ARPHRD_HWX25, + ARPHRD_PPP, ARPHRD_CISCO, ARPHRD_LAPB, ARPHRD_DDCMP, + ARPHRD_RAWHDLC, ARPHRD_TUNNEL, ARPHRD_TUNNEL6, ARPHRD_FRAD, + ARPHRD_SKIP, ARPHRD_LOOPBACK, ARPHRD_LOCALTLK, ARPHRD_FDDI, + ARPHRD_BIF, ARPHRD_SIT, ARPHRD_IPDDP, ARPHRD_IPGRE, + ARPHRD_PIMREG, ARPHRD_HIPPI, ARPHRD_ASH, ARPHRD_ECONET, + ARPHRD_IRDA, ARPHRD_FCPP, ARPHRD_FCAL, ARPHRD_FCPL, + ARPHRD_FCFABRIC, ARPHRD_IEEE802_TR, ARPHRD_IEEE80211, + ARPHRD_IEEE80211_PRISM, ARPHRD_IEEE80211_RADIOTAP, ARPHRD_VOID, + ARPHRD_NONE}; + +static const char *netdev_lock_name[] = + {"_xmit_NETROM", "_xmit_ETHER", "_xmit_EETHER", "_xmit_AX25", + "_xmit_PRONET", "_xmit_CHAOS", "_xmit_IEEE802", "_xmit_ARCNET", + "_xmit_APPLETLK", "_xmit_DLCI", "_xmit_ATM", "_xmit_METRICOM", + "_xmit_IEEE1394", "_xmit_EUI64", "_xmit_INFINIBAND", "_xmit_SLIP", + "_xmit_CSLIP", "_xmit_SLIP6", "_xmit_CSLIP6", "_xmit_RSRVD", + "_xmit_ADAPT", "_xmit_ROSE", "_xmit_X25", "_xmit_HWX25", + "_xmit_PPP", "_xmit_CISCO", "_xmit_LAPB", "_xmit_DDCMP", + "_xmit_RAWHDLC", "_xmit_TUNNEL", "_xmit_TUNNEL6", "_xmit_FRAD", + "_xmit_SKIP", "_xmit_LOOPBACK", "_xmit_LOCALTLK", "_xmit_FDDI", + "_xmit_BIF", "_xmit_SIT", "_xmit_IPDDP", "_xmit_IPGRE", + "_xmit_PIMREG", "_xmit_HIPPI", "_xmit_ASH", "_xmit_ECONET", + "_xmit_IRDA", "_xmit_FCPP", "_xmit_FCAL", "_xmit_FCPL", + "_xmit_FCFABRIC", "_xmit_IEEE802_TR", "_xmit_IEEE80211", + "_xmit_IEEE80211_PRISM", "_xmit_IEEE80211_RADIOTAP", "_xmit_VOID", + "_xmit_NONE"}; + +static struct lock_class_key netdev_xmit_lock_key[ARRAY_SIZE(netdev_lock_type)]; + +static inline unsigned short netdev_lock_pos(unsigned short dev_type) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(netdev_lock_type); i++) + if (netdev_lock_type[i] == dev_type) + return i; + /* the last key is used by default */ + return ARRAY_SIZE(netdev_lock_type) - 1; +} + +static inline void netdev_set_lockdep_class(spinlock_t *lock, + unsigned short dev_type) +{ + int i; + + i = netdev_lock_pos(dev_type); + lockdep_set_class_and_name(lock, &netdev_xmit_lock_key[i], + netdev_lock_name[i]); +} +#else +static inline void netdev_set_lockdep_class(spinlock_t *lock, + unsigned short dev_type) +{ +} +#endif /******************************************************************************* @@ -3001,6 +3069,7 @@ int register_netdevice(struct net_device *dev) spin_lock_init(&dev->queue_lock); spin_lock_init(&dev->_xmit_lock); + netdev_set_lockdep_class(&dev->_xmit_lock, dev->type); dev->xmit_lock_owner = -1; spin_lock_init(&dev->ingress_lock); @@ -3245,7 +3314,6 @@ void netdev_run_todo(void) continue; } - netdev_unregister_sysfs(dev); dev->reg_state = NETREG_UNREGISTERED; netdev_wait_allrefs(dev); @@ -3256,11 +3324,11 @@ void netdev_run_todo(void) BUG_TRAP(!dev->ip6_ptr); BUG_TRAP(!dev->dn_ptr); - /* It must be the very last action, - * after this 'dev' may point to freed up memory. - */ if (dev->destructor) dev->destructor(dev); + + /* Free network device */ + kobject_put(&dev->dev.kobj); } out: @@ -3411,6 +3479,9 @@ void unregister_netdevice(struct net_device *dev) /* Notifier chain MUST detach us from master device. */ BUG_TRAP(!dev->master); + /* Remove entries from sysfs */ + netdev_unregister_sysfs(dev); + /* Finish processing unregister after unlock */ net_set_todo(dev); diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c index b21307b15b82d7..5c19b0646d7a3e 100644 --- a/net/core/net-sysfs.c +++ b/net/core/net-sysfs.c @@ -456,9 +456,15 @@ static struct class net_class = { #endif }; +/* Delete sysfs entries but hold kobject reference until after all + * netdev references are gone. + */ void netdev_unregister_sysfs(struct net_device * net) { - device_del(&(net->dev)); + struct device *dev = &(net->dev); + + kobject_get(&dev->kobj); + device_del(dev); } /* Create sysfs entries for network device. */ diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c index 8c971a2efe2a1d..27da9cdec6a83b 100644 --- a/net/core/rtnetlink.c +++ b/net/core/rtnetlink.c @@ -437,7 +437,7 @@ static void copy_rtnl_link_stats(struct rtnl_link_stats *a, a->tx_compressed = b->tx_compressed; }; -static inline size_t if_nlmsg_size(int iwbuflen) +static inline size_t if_nlmsg_size(void) { return NLMSG_ALIGN(sizeof(struct ifinfomsg)) + nla_total_size(IFNAMSIZ) /* IFLA_IFNAME */ @@ -452,13 +452,12 @@ static inline size_t if_nlmsg_size(int iwbuflen) + nla_total_size(4) /* IFLA_LINK */ + nla_total_size(4) /* IFLA_MASTER */ + nla_total_size(1) /* IFLA_OPERSTATE */ - + nla_total_size(1) /* IFLA_LINKMODE */ - + nla_total_size(iwbuflen); + + nla_total_size(1); /* IFLA_LINKMODE */ } static int rtnl_fill_ifinfo(struct sk_buff *skb, struct net_device *dev, - void *iwbuf, int iwbuflen, int type, u32 pid, - u32 seq, u32 change, unsigned int flags) + int type, u32 pid, u32 seq, u32 change, + unsigned int flags) { struct ifinfomsg *ifm; struct nlmsghdr *nlh; @@ -523,9 +522,6 @@ static int rtnl_fill_ifinfo(struct sk_buff *skb, struct net_device *dev, } } - if (iwbuf) - NLA_PUT(skb, IFLA_WIRELESS, iwbuflen, iwbuf); - return nlmsg_end(skb, nlh); nla_put_failure: @@ -543,7 +539,7 @@ static int rtnl_dump_ifinfo(struct sk_buff *skb, struct netlink_callback *cb) for_each_netdev(dev) { if (idx < s_idx) goto cont; - if (rtnl_fill_ifinfo(skb, dev, NULL, 0, RTM_NEWLINK, + if (rtnl_fill_ifinfo(skb, dev, RTM_NEWLINK, NETLINK_CB(cb->skb).pid, cb->nlh->nlmsg_seq, 0, NLM_F_MULTI) <= 0) break; @@ -689,8 +685,15 @@ static int rtnl_setlink(struct sk_buff *skb, struct nlmsghdr *nlh, void *arg) } - if (ifm->ifi_flags) - dev_change_flags(dev, ifm->ifi_flags); + if (ifm->ifi_flags || ifm->ifi_change) { + unsigned int flags = ifm->ifi_flags; + + /* bugwards compatibility: ifi_change == 0 is treated as ~0 */ + if (ifm->ifi_change) + flags = (flags & ifm->ifi_change) | + (dev->flags & ~ifm->ifi_change); + dev_change_flags(dev, flags); + } if (tb[IFLA_TXQLEN]) dev->tx_queue_len = nla_get_u32(tb[IFLA_TXQLEN]); @@ -730,8 +733,6 @@ static int rtnl_getlink(struct sk_buff *skb, struct nlmsghdr* nlh, void *arg) struct nlattr *tb[IFLA_MAX+1]; struct net_device *dev = NULL; struct sk_buff *nskb; - char *iw_buf = NULL, *iw = NULL; - int iw_buf_len = 0; int err; err = nlmsg_parse(nlh, sizeof(*ifm), tb, IFLA_MAX, ifla_policy); @@ -746,14 +747,14 @@ static int rtnl_getlink(struct sk_buff *skb, struct nlmsghdr* nlh, void *arg) } else return -EINVAL; - nskb = nlmsg_new(if_nlmsg_size(iw_buf_len), GFP_KERNEL); + nskb = nlmsg_new(if_nlmsg_size(), GFP_KERNEL); if (nskb == NULL) { err = -ENOBUFS; goto errout; } - err = rtnl_fill_ifinfo(nskb, dev, iw, iw_buf_len, RTM_NEWLINK, - NETLINK_CB(skb).pid, nlh->nlmsg_seq, 0, 0); + err = rtnl_fill_ifinfo(nskb, dev, RTM_NEWLINK, NETLINK_CB(skb).pid, + nlh->nlmsg_seq, 0, 0); if (err < 0) { /* -EMSGSIZE implies BUG in if_nlmsg_size */ WARN_ON(err == -EMSGSIZE); @@ -762,7 +763,6 @@ static int rtnl_getlink(struct sk_buff *skb, struct nlmsghdr* nlh, void *arg) } err = rtnl_unicast(nskb, NETLINK_CB(skb).pid); errout: - kfree(iw_buf); dev_put(dev); return err; @@ -797,11 +797,11 @@ void rtmsg_ifinfo(int type, struct net_device *dev, unsigned change) struct sk_buff *skb; int err = -ENOBUFS; - skb = nlmsg_new(if_nlmsg_size(0), GFP_KERNEL); + skb = nlmsg_new(if_nlmsg_size(), GFP_KERNEL); if (skb == NULL) goto errout; - err = rtnl_fill_ifinfo(skb, dev, NULL, 0, type, 0, 0, change, 0); + err = rtnl_fill_ifinfo(skb, dev, type, 0, 0, change, 0); if (err < 0) { /* -EMSGSIZE implies BUG in if_nlmsg_size() */ WARN_ON(err == -EMSGSIZE); diff --git a/net/core/skbuff.c b/net/core/skbuff.c index 142257307fa262..7c6a34e21eee74 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -644,11 +644,10 @@ int pskb_expand_head(struct sk_buff *skb, int nhead, int ntail, /* Copy only real data... and, alas, header. This should be * optimized for the cases when header is void. */ - memcpy(data + nhead, skb->head, #ifdef NET_SKBUFF_DATA_USES_OFFSET - skb->tail); + memcpy(data + nhead, skb->head, skb->tail); #else - skb->tail - skb->head); + memcpy(data + nhead, skb->head, skb->tail - skb->head); #endif memcpy(data + size, skb_end_pointer(skb), sizeof(struct skb_shared_info)); diff --git a/net/core/sock.c b/net/core/sock.c index 22183c2ef28497..7e51d3a5e4f6c5 100644 --- a/net/core/sock.c +++ b/net/core/sock.c @@ -206,7 +206,19 @@ static int sock_set_timeout(long *timeo_p, char __user *optval, int optlen) return -EINVAL; if (copy_from_user(&tv, optval, sizeof(tv))) return -EFAULT; - + if (tv.tv_usec < 0 || tv.tv_usec >= USEC_PER_SEC) + return -EDOM; + + if (tv.tv_sec < 0) { + static int warned = 0; + *timeo_p = 0; + if (warned < 10 && net_ratelimit()) + warned++; + printk(KERN_INFO "sock_set_timeout: `%s' (pid %d) " + "tries to set negative timeout\n", + current->comm, current->pid); + return 0; + } *timeo_p = MAX_SCHEDULE_TIMEOUT; if (tv.tv_sec == 0 && tv.tv_usec == 0) return 0; diff --git a/net/core/sysctl_net_core.c b/net/core/sysctl_net_core.c index b29712033dd4a2..f34aca041a25b8 100644 --- a/net/core/sysctl_net_core.c +++ b/net/core/sysctl_net_core.c @@ -24,6 +24,7 @@ extern int sysctl_core_destroy_delay; #ifdef CONFIG_XFRM extern u32 sysctl_xfrm_aevent_etime; extern u32 sysctl_xfrm_aevent_rseqth; +extern int sysctl_xfrm_larval_drop; #endif ctl_table core_table[] = { @@ -118,6 +119,14 @@ ctl_table core_table[] = { .mode = 0644, .proc_handler = &proc_dointvec }, + { + .ctl_name = CTL_UNNUMBERED, + .procname = "xfrm_larval_drop", + .data = &sysctl_xfrm_larval_drop, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = &proc_dointvec + }, #endif /* CONFIG_XFRM */ #endif /* CONFIG_NET */ { diff --git a/net/dccp/Kconfig b/net/dccp/Kconfig index b8a68dd4100034..0549e4719b1349 100644 --- a/net/dccp/Kconfig +++ b/net/dccp/Kconfig @@ -1,8 +1,6 @@ -menu "DCCP Configuration (EXPERIMENTAL)" - depends on INET && EXPERIMENTAL - -config IP_DCCP +menuconfig IP_DCCP tristate "The DCCP Protocol (EXPERIMENTAL)" + depends on INET && EXPERIMENTAL ---help--- Datagram Congestion Control Protocol (RFC 4340) @@ -19,19 +17,20 @@ config IP_DCCP If in doubt, say N. +if IP_DCCP + config INET_DCCP_DIAG - depends on IP_DCCP && INET_DIAG + depends on INET_DIAG def_tristate y if (IP_DCCP = y && INET_DIAG = y) def_tristate m config IP_DCCP_ACKVEC - depends on IP_DCCP bool source "net/dccp/ccids/Kconfig" menu "DCCP Kernel Hacking" - depends on IP_DCCP && DEBUG_KERNEL=y + depends on DEBUG_KERNEL=y config IP_DCCP_DEBUG bool "DCCP debug messages" @@ -61,4 +60,4 @@ config NET_DCCPPROBE endmenu -endmenu +endif # IP_DDCP diff --git a/net/dccp/ccids/ccid3.c b/net/dccp/ccids/ccid3.c index d7d9ce7372441a..ec7fa4d67f080c 100644 --- a/net/dccp/ccids/ccid3.c +++ b/net/dccp/ccids/ccid3.c @@ -419,7 +419,6 @@ static void ccid3_hc_tx_packet_sent(struct sock *sk, int more, static void ccid3_hc_tx_packet_recv(struct sock *sk, struct sk_buff *skb) { - const struct dccp_sock *dp = dccp_sk(sk); struct ccid3_hc_tx_sock *hctx = ccid3_hc_tx_sk(sk); struct ccid3_options_received *opt_recv; struct dccp_tx_hist_entry *packet; @@ -491,7 +490,7 @@ static void ccid3_hc_tx_packet_recv(struct sock *sk, struct sk_buff *skb) ccid3_pr_debug("%s(%p), s=%u, MSS=%u, " "R_sample=%uus, X=%u\n", dccp_role(sk), sk, hctx->ccid3hctx_s, - dp->dccps_mss_cache, r_sample, + dccp_sk(sk)->dccps_mss_cache, r_sample, (unsigned)(hctx->ccid3hctx_x >> 6)); ccid3_hc_tx_set_state(sk, TFRC_SSTATE_FBACK); diff --git a/net/dccp/ipv6.c b/net/dccp/ipv6.c index 64eac2515aa255..31737cdf156a5e 100644 --- a/net/dccp/ipv6.c +++ b/net/dccp/ipv6.c @@ -1043,9 +1043,13 @@ static int dccp_v6_connect(struct sock *sk, struct sockaddr *uaddr, if (final_p) ipv6_addr_copy(&fl.fl6_dst, final_p); - err = xfrm_lookup(&dst, &fl, sk, 1); - if (err < 0) - goto failure; + err = __xfrm_lookup(&dst, &fl, sk, 1); + if (err < 0) { + if (err == -EREMOTE) + err = ip6_dst_blackhole(sk, &dst, &fl); + if (err < 0) + goto failure; + } if (saddr == NULL) { saddr = &fl.fl6_src; diff --git a/net/ieee80211/ieee80211_module.c b/net/ieee80211/ieee80211_module.c index 7ec6610841bab6..17ad278696edfa 100644 --- a/net/ieee80211/ieee80211_module.c +++ b/net/ieee80211/ieee80211_module.c @@ -140,7 +140,7 @@ struct net_device *alloc_ieee80211(int sizeof_priv) dev = alloc_etherdev(sizeof(struct ieee80211_device) + sizeof_priv); if (!dev) { - IEEE80211_ERROR("Unable to network device.\n"); + IEEE80211_ERROR("Unable to allocate network device.\n"); goto failed; } ieee = netdev_priv(dev); diff --git a/net/ieee80211/softmac/ieee80211softmac_module.c b/net/ieee80211/softmac/ieee80211softmac_module.c index e9cdc6615ddc74..c308756c2f9dae 100644 --- a/net/ieee80211/softmac/ieee80211softmac_module.c +++ b/net/ieee80211/softmac/ieee80211softmac_module.c @@ -33,7 +33,10 @@ struct net_device *alloc_ieee80211softmac(int sizeof_priv) struct ieee80211softmac_device *softmac; struct net_device *dev; - dev = alloc_ieee80211(sizeof(struct ieee80211softmac_device) + sizeof_priv); + dev = alloc_ieee80211(sizeof(*softmac) + sizeof_priv); + if (!dev) + return NULL; + softmac = ieee80211_priv(dev); softmac->dev = dev; softmac->ieee = netdev_priv(dev); diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig index c68196cc56abae..010fbb2d45e968 100644 --- a/net/ipv4/Kconfig +++ b/net/ipv4/Kconfig @@ -43,11 +43,11 @@ config IP_ADVANCED_ROUTER asymmetric routing (packets from you to a host take a different path than packets from that host to you) or if you operate a non-routing host which has several IP addresses on different interfaces. To turn - rp_filter off use: + rp_filter on use: - echo 0 > /proc/sys/net/ipv4/conf/<device>/rp_filter + echo 1 > /proc/sys/net/ipv4/conf/<device>/rp_filter or - echo 0 > /proc/sys/net/ipv4/conf/all/rp_filter + echo 1 > /proc/sys/net/ipv4/conf/all/rp_filter If unsure, say N here. @@ -577,6 +577,7 @@ config TCP_CONG_VENO config TCP_CONG_YEAH tristate "YeAH TCP" depends on EXPERIMENTAL + select TCP_CONG_VEGAS default n ---help--- YeAH-TCP is a sender-side high-speed enabled TCP congestion control diff --git a/net/ipv4/fib_hash.c b/net/ipv4/fib_hash.c index 9cfecf1215c94b..07e843a47dde6b 100644 --- a/net/ipv4/fib_hash.c +++ b/net/ipv4/fib_hash.c @@ -456,6 +456,8 @@ static int fn_hash_insert(struct fib_table *tb, struct fib_config *cfg) fib_release_info(fi_drop); if (state & FA_S_ACCESSED) rt_cache_flush(-1); + rtmsg_fib(RTM_NEWROUTE, key, fa, cfg->fc_dst_len, tb->tb_id, + &cfg->fc_nlinfo, NLM_F_REPLACE); return 0; } @@ -523,7 +525,7 @@ static int fn_hash_insert(struct fib_table *tb, struct fib_config *cfg) rt_cache_flush(-1); rtmsg_fib(RTM_NEWROUTE, key, new_fa, cfg->fc_dst_len, tb->tb_id, - &cfg->fc_nlinfo); + &cfg->fc_nlinfo, 0); return 0; out_free_new_fa: @@ -589,7 +591,7 @@ static int fn_hash_delete(struct fib_table *tb, struct fib_config *cfg) fa = fa_to_delete; rtmsg_fib(RTM_DELROUTE, key, fa, cfg->fc_dst_len, - tb->tb_id, &cfg->fc_nlinfo); + tb->tb_id, &cfg->fc_nlinfo, 0); kill_fn = 0; write_lock_bh(&fib_hash_lock); diff --git a/net/ipv4/fib_lookup.h b/net/ipv4/fib_lookup.h index 0e8b70bad4e194..eef9eec17e0c58 100644 --- a/net/ipv4/fib_lookup.h +++ b/net/ipv4/fib_lookup.h @@ -30,7 +30,8 @@ extern int fib_dump_info(struct sk_buff *skb, u32 pid, u32 seq, int event, int dst_len, u8 tos, struct fib_info *fi, unsigned int); extern void rtmsg_fib(int event, __be32 key, struct fib_alias *fa, - int dst_len, u32 tb_id, struct nl_info *info); + int dst_len, u32 tb_id, struct nl_info *info, + unsigned int nlm_flags); extern struct fib_alias *fib_find_alias(struct list_head *fah, u8 tos, u32 prio); extern int fib_detect_death(struct fib_info *fi, int order, diff --git a/net/ipv4/fib_semantics.c b/net/ipv4/fib_semantics.c index 406ea7050aede7..bb94550d95c3e8 100644 --- a/net/ipv4/fib_semantics.c +++ b/net/ipv4/fib_semantics.c @@ -301,7 +301,8 @@ static inline size_t fib_nlmsg_size(struct fib_info *fi) } void rtmsg_fib(int event, __be32 key, struct fib_alias *fa, - int dst_len, u32 tb_id, struct nl_info *info) + int dst_len, u32 tb_id, struct nl_info *info, + unsigned int nlm_flags) { struct sk_buff *skb; u32 seq = info->nlh ? info->nlh->nlmsg_seq : 0; @@ -313,7 +314,7 @@ void rtmsg_fib(int event, __be32 key, struct fib_alias *fa, err = fib_dump_info(skb, info->pid, seq, event, tb_id, fa->fa_type, fa->fa_scope, key, dst_len, - fa->fa_tos, fa->fa_info, 0); + fa->fa_tos, fa->fa_info, nlm_flags); if (err < 0) { /* -EMSGSIZE implies BUG in fib_nlmsg_size() */ WARN_ON(err == -EMSGSIZE); diff --git a/net/ipv4/fib_trie.c b/net/ipv4/fib_trie.c index 9be7da7c3a8fa8..30e332ade61bbb 100644 --- a/net/ipv4/fib_trie.c +++ b/net/ipv4/fib_trie.c @@ -1226,6 +1226,8 @@ static int fn_trie_insert(struct fib_table *tb, struct fib_config *cfg) fib_release_info(fi_drop); if (state & FA_S_ACCESSED) rt_cache_flush(-1); + rtmsg_fib(RTM_NEWROUTE, htonl(key), new_fa, plen, + tb->tb_id, &cfg->fc_nlinfo, NLM_F_REPLACE); goto succeeded; } @@ -1278,7 +1280,7 @@ static int fn_trie_insert(struct fib_table *tb, struct fib_config *cfg) rt_cache_flush(-1); rtmsg_fib(RTM_NEWROUTE, htonl(key), new_fa, plen, tb->tb_id, - &cfg->fc_nlinfo); + &cfg->fc_nlinfo, 0); succeeded: return 0; @@ -1624,7 +1626,7 @@ static int fn_trie_delete(struct fib_table *tb, struct fib_config *cfg) fa = fa_to_delete; rtmsg_fib(RTM_DELROUTE, htonl(key), fa, plen, tb->tb_id, - &cfg->fc_nlinfo); + &cfg->fc_nlinfo, 0); l = fib_find_node(t, key); li = find_leaf_info(l, plen); diff --git a/net/ipv4/icmp.c b/net/ipv4/icmp.c index d38cbba92a4ddd..e238b17f554cc1 100644 --- a/net/ipv4/icmp.c +++ b/net/ipv4/icmp.c @@ -514,7 +514,10 @@ void icmp_send(struct sk_buff *skb_in, int type, int code, __be32 info) saddr = iph->daddr; if (!(rt->rt_flags & RTCF_LOCAL)) { - if (sysctl_icmp_errors_use_inbound_ifaddr) + /* This is broken, skb_in->dev points to the outgoing device + * after the packet passes through ip_output(). + */ + if (skb_in->dev && sysctl_icmp_errors_use_inbound_ifaddr) saddr = inet_select_addr(skb_in->dev, 0, RT_SCOPE_LINK); else saddr = 0; diff --git a/net/ipv4/ipvs/Kconfig b/net/ipv4/ipvs/Kconfig index 891b9355cf9666..09d0c3f3566978 100644 --- a/net/ipv4/ipvs/Kconfig +++ b/net/ipv4/ipvs/Kconfig @@ -1,10 +1,7 @@ # # IP Virtual Server configuration # -menu "IP: Virtual Server Configuration" - depends on NETFILTER - -config IP_VS +menuconfig IP_VS tristate "IP virtual server support (EXPERIMENTAL)" depends on NETFILTER ---help--- @@ -25,9 +22,10 @@ config IP_VS If you want to compile it in kernel, say Y. To compile it as a module, choose M here. If unsure, say N. +if IP_VS + config IP_VS_DEBUG bool "IP virtual server debugging" - depends on IP_VS ---help--- Say Y here if you want to get additional messages useful in debugging the IP virtual server code. You can change the debug @@ -35,7 +33,6 @@ config IP_VS_DEBUG config IP_VS_TAB_BITS int "IPVS connection table size (the Nth power of 2)" - depends on IP_VS default "12" ---help--- The IPVS connection hash table uses the chaining scheme to handle @@ -61,42 +58,35 @@ config IP_VS_TAB_BITS needed for your box. comment "IPVS transport protocol load balancing support" - depends on IP_VS config IP_VS_PROTO_TCP bool "TCP load balancing support" - depends on IP_VS ---help--- This option enables support for load balancing TCP transport protocol. Say Y if unsure. config IP_VS_PROTO_UDP bool "UDP load balancing support" - depends on IP_VS ---help--- This option enables support for load balancing UDP transport protocol. Say Y if unsure. config IP_VS_PROTO_ESP bool "ESP load balancing support" - depends on IP_VS ---help--- This option enables support for load balancing ESP (Encapsulation Security Payload) transport protocol. Say Y if unsure. config IP_VS_PROTO_AH bool "AH load balancing support" - depends on IP_VS ---help--- This option enables support for load balancing AH (Authentication Header) transport protocol. Say Y if unsure. comment "IPVS scheduler" - depends on IP_VS config IP_VS_RR tristate "round-robin scheduling" - depends on IP_VS ---help--- The robin-robin scheduling algorithm simply directs network connections to different real servers in a round-robin manner. @@ -106,7 +96,6 @@ config IP_VS_RR config IP_VS_WRR tristate "weighted round-robin scheduling" - depends on IP_VS ---help--- The weighted robin-robin scheduling algorithm directs network connections to different real servers based on server weights @@ -120,7 +109,6 @@ config IP_VS_WRR config IP_VS_LC tristate "least-connection scheduling" - depends on IP_VS ---help--- The least-connection scheduling algorithm directs network connections to the server with the least number of active @@ -131,7 +119,6 @@ config IP_VS_LC config IP_VS_WLC tristate "weighted least-connection scheduling" - depends on IP_VS ---help--- The weighted least-connection scheduling algorithm directs network connections to the server with the least active connections @@ -142,7 +129,6 @@ config IP_VS_WLC config IP_VS_LBLC tristate "locality-based least-connection scheduling" - depends on IP_VS ---help--- The locality-based least-connection scheduling algorithm is for destination IP load balancing. It is usually used in cache cluster. @@ -157,7 +143,6 @@ config IP_VS_LBLC config IP_VS_LBLCR tristate "locality-based least-connection with replication scheduling" - depends on IP_VS ---help--- The locality-based least-connection with replication scheduling algorithm is also for destination IP load balancing. It is @@ -176,7 +161,6 @@ config IP_VS_LBLCR config IP_VS_DH tristate "destination hashing scheduling" - depends on IP_VS ---help--- The destination hashing scheduling algorithm assigns network connections to the servers through looking up a statically assigned @@ -187,7 +171,6 @@ config IP_VS_DH config IP_VS_SH tristate "source hashing scheduling" - depends on IP_VS ---help--- The source hashing scheduling algorithm assigns network connections to the servers through looking up a statically assigned @@ -198,7 +181,6 @@ config IP_VS_SH config IP_VS_SED tristate "shortest expected delay scheduling" - depends on IP_VS ---help--- The shortest expected delay scheduling algorithm assigns network connections to the server with the shortest expected delay. The @@ -212,7 +194,6 @@ config IP_VS_SED config IP_VS_NQ tristate "never queue scheduling" - depends on IP_VS ---help--- The never queue scheduling algorithm adopts a two-speed model. When there is an idle server available, the job will be sent to @@ -225,11 +206,10 @@ config IP_VS_NQ module, choose M here. If unsure, say N. comment 'IPVS application helper' - depends on IP_VS config IP_VS_FTP tristate "FTP protocol helper" - depends on IP_VS && IP_VS_PROTO_TCP + depends on IP_VS_PROTO_TCP ---help--- FTP is a protocol that transfers IP address and/or port number in the payload. In the virtual server via Network Address Translation, @@ -241,4 +221,4 @@ config IP_VS_FTP If you want to compile it in kernel, say Y. To compile it as a module, choose M here. If unsure, say N. -endmenu +endif # IP_VS diff --git a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c index 0654eaae70c9fa..fd62a41d69cc82 100644 --- a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c +++ b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c @@ -154,12 +154,10 @@ static unsigned int ipv4_conntrack_defrag(unsigned int hooknum, const struct net_device *out, int (*okfn)(struct sk_buff *)) { -#if !defined(CONFIG_IP_NF_NAT) && !defined(CONFIG_IP_NF_NAT_MODULE) /* Previously seen (loopback)? Ignore. Do this before fragment check. */ if ((*pskb)->nfct) return NF_ACCEPT; -#endif /* Gather fragments. */ if (ip_hdr(*pskb)->frag_off & htons(IP_MF | IP_OFFSET)) { diff --git a/net/ipv4/netfilter/nf_nat_ftp.c b/net/ipv4/netfilter/nf_nat_ftp.c index 751b598017555e..e6bc8e5a72f137 100644 --- a/net/ipv4/netfilter/nf_nat_ftp.c +++ b/net/ipv4/netfilter/nf_nat_ftp.c @@ -40,8 +40,7 @@ mangle_rfc959_packet(struct sk_buff **pskb, unsigned int matchoff, unsigned int matchlen, struct nf_conn *ct, - enum ip_conntrack_info ctinfo, - u32 *seq) + enum ip_conntrack_info ctinfo) { char buffer[sizeof("nnn,nnn,nnn,nnn,nnn,nnn")]; @@ -50,7 +49,6 @@ mangle_rfc959_packet(struct sk_buff **pskb, DEBUGP("calling nf_nat_mangle_tcp_packet\n"); - *seq += strlen(buffer) - matchlen; return nf_nat_mangle_tcp_packet(pskb, ct, ctinfo, matchoff, matchlen, buffer, strlen(buffer)); } @@ -63,8 +61,7 @@ mangle_eprt_packet(struct sk_buff **pskb, unsigned int matchoff, unsigned int matchlen, struct nf_conn *ct, - enum ip_conntrack_info ctinfo, - u32 *seq) + enum ip_conntrack_info ctinfo) { char buffer[sizeof("|1|255.255.255.255|65535|")]; @@ -72,7 +69,6 @@ mangle_eprt_packet(struct sk_buff **pskb, DEBUGP("calling nf_nat_mangle_tcp_packet\n"); - *seq += strlen(buffer) - matchlen; return nf_nat_mangle_tcp_packet(pskb, ct, ctinfo, matchoff, matchlen, buffer, strlen(buffer)); } @@ -85,8 +81,7 @@ mangle_epsv_packet(struct sk_buff **pskb, unsigned int matchoff, unsigned int matchlen, struct nf_conn *ct, - enum ip_conntrack_info ctinfo, - u32 *seq) + enum ip_conntrack_info ctinfo) { char buffer[sizeof("|||65535|")]; @@ -94,14 +89,13 @@ mangle_epsv_packet(struct sk_buff **pskb, DEBUGP("calling nf_nat_mangle_tcp_packet\n"); - *seq += strlen(buffer) - matchlen; return nf_nat_mangle_tcp_packet(pskb, ct, ctinfo, matchoff, matchlen, buffer, strlen(buffer)); } static int (*mangle[])(struct sk_buff **, __be32, u_int16_t, unsigned int, unsigned int, struct nf_conn *, - enum ip_conntrack_info, u32 *seq) + enum ip_conntrack_info) = { [NF_CT_FTP_PORT] = mangle_rfc959_packet, [NF_CT_FTP_PASV] = mangle_rfc959_packet, @@ -116,8 +110,7 @@ static unsigned int nf_nat_ftp(struct sk_buff **pskb, enum nf_ct_ftp_type type, unsigned int matchoff, unsigned int matchlen, - struct nf_conntrack_expect *exp, - u32 *seq) + struct nf_conntrack_expect *exp) { __be32 newip; u_int16_t port; @@ -145,8 +138,7 @@ static unsigned int nf_nat_ftp(struct sk_buff **pskb, if (port == 0) return NF_DROP; - if (!mangle[type](pskb, newip, port, matchoff, matchlen, ct, ctinfo, - seq)) { + if (!mangle[type](pskb, newip, port, matchoff, matchlen, ct, ctinfo)) { nf_conntrack_unexpect_related(exp); return NF_DROP; } diff --git a/net/ipv4/netfilter/nf_nat_h323.c b/net/ipv4/netfilter/nf_nat_h323.c index fcebc968d37f67..c5d2a2d690b84e 100644 --- a/net/ipv4/netfilter/nf_nat_h323.c +++ b/net/ipv4/netfilter/nf_nat_h323.c @@ -455,9 +455,9 @@ static int nat_q931(struct sk_buff **pskb, struct nf_conn *ct, if (idx > 0 && get_h225_addr(ct, *data, &taddr[0], &addr, &port) && (ntohl(addr.ip) & 0xff000000) == 0x7f000000) { - set_h225_addr_hook(pskb, data, 0, &taddr[0], - &ct->tuplehash[!dir].tuple.dst.u3, - info->sig_port[!dir]); + set_h225_addr(pskb, data, 0, &taddr[0], + &ct->tuplehash[!dir].tuple.dst.u3, + info->sig_port[!dir]); } } else { nf_conntrack_unexpect_related(exp); diff --git a/net/ipv4/route.c b/net/ipv4/route.c index cb76e3c725a085..8603cfb271f2c4 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -2396,7 +2396,7 @@ static int ip_route_output_slow(struct rtable **rp, const struct flowi *oldflp) /* It is equivalent to inet_addr_type(saddr) == RTN_LOCAL */ dev_out = ip_dev_find(oldflp->fl4_src); - if ((dev_out == NULL) && !(sysctl_ip_nonlocal_bind)) + if (dev_out == NULL) goto out; /* I removed check for oif == dev_out->oif here. @@ -2407,7 +2407,7 @@ static int ip_route_output_slow(struct rtable **rp, const struct flowi *oldflp) of another iface. --ANK */ - if (dev_out && oldflp->oif == 0 + if (oldflp->oif == 0 && (MULTICAST(oldflp->fl4_dst) || oldflp->fl4_dst == htonl(0xFFFFFFFF))) { /* Special hack: user can direct multicasts and limited broadcast via necessary interface @@ -2598,6 +2598,69 @@ int __ip_route_output_key(struct rtable **rp, const struct flowi *flp) EXPORT_SYMBOL_GPL(__ip_route_output_key); +static void ipv4_rt_blackhole_update_pmtu(struct dst_entry *dst, u32 mtu) +{ +} + +static struct dst_ops ipv4_dst_blackhole_ops = { + .family = AF_INET, + .protocol = __constant_htons(ETH_P_IP), + .destroy = ipv4_dst_destroy, + .check = ipv4_dst_check, + .update_pmtu = ipv4_rt_blackhole_update_pmtu, + .entry_size = sizeof(struct rtable), +}; + + +static int ipv4_blackhole_output(struct sk_buff *skb) +{ + kfree_skb(skb); + return 0; +} + +static int ipv4_dst_blackhole(struct rtable **rp, struct flowi *flp, struct sock *sk) +{ + struct rtable *ort = *rp; + struct rtable *rt = (struct rtable *) + dst_alloc(&ipv4_dst_blackhole_ops); + + if (rt) { + struct dst_entry *new = &rt->u.dst; + + atomic_set(&new->__refcnt, 1); + new->__use = 1; + new->input = ipv4_blackhole_output; + new->output = ipv4_blackhole_output; + memcpy(new->metrics, ort->u.dst.metrics, RTAX_MAX*sizeof(u32)); + + new->dev = ort->u.dst.dev; + if (new->dev) + dev_hold(new->dev); + + rt->fl = ort->fl; + + rt->idev = ort->idev; + if (rt->idev) + in_dev_hold(rt->idev); + rt->rt_flags = ort->rt_flags; + rt->rt_type = ort->rt_type; + rt->rt_dst = ort->rt_dst; + rt->rt_src = ort->rt_src; + rt->rt_iif = ort->rt_iif; + rt->rt_gateway = ort->rt_gateway; + rt->rt_spec_dst = ort->rt_spec_dst; + rt->peer = ort->peer; + if (rt->peer) + atomic_inc(&rt->peer->refcnt); + + dst_free(new); + } + + dst_release(&(*rp)->u.dst); + *rp = rt; + return (rt ? 0 : -ENOMEM); +} + int ip_route_output_flow(struct rtable **rp, struct flowi *flp, struct sock *sk, int flags) { int err; @@ -2610,7 +2673,11 @@ int ip_route_output_flow(struct rtable **rp, struct flowi *flp, struct sock *sk, flp->fl4_src = (*rp)->rt_src; if (!flp->fl4_dst) flp->fl4_dst = (*rp)->rt_dst; - return xfrm_lookup((struct dst_entry **)rp, flp, sk, flags); + err = __xfrm_lookup((struct dst_entry **)rp, flp, sk, flags); + if (err == -EREMOTE) + err = ipv4_dst_blackhole(rp, flp, sk); + + return err; } return 0; @@ -3139,6 +3206,8 @@ int __init ip_rt_init(void) kmem_cache_create("ip_dst_cache", sizeof(struct rtable), 0, SLAB_HWCACHE_ALIGN|SLAB_PANIC, NULL, NULL); + ipv4_dst_blackhole_ops.kmem_cachep = ipv4_dst_ops.kmem_cachep; + rt_hash_table = (struct rt_hash_bucket *) alloc_large_system_hash("IP route cache", sizeof(struct rt_hash_bucket), diff --git a/net/ipv4/tcp_cong.c b/net/ipv4/tcp_cong.c index 86b26539e54b8a..1260e52ad77286 100644 --- a/net/ipv4/tcp_cong.c +++ b/net/ipv4/tcp_cong.c @@ -276,30 +276,34 @@ int tcp_set_congestion_control(struct sock *sk, const char *name) /* - * Slow start (exponential increase) with - * RFC3742 Limited Slow Start (fast linear increase) support. + * Slow start is used when congestion window is less than slow start + * threshold. This version implements the basic RFC2581 version + * and optionally supports: + * RFC3742 Limited Slow Start - growth limited to max_ssthresh + * RFC3465 Appropriate Byte Counting - growth limited by bytes acknowledged */ void tcp_slow_start(struct tcp_sock *tp) { - int cnt = 0; - - if (sysctl_tcp_abc) { - /* RFC3465: Slow Start - * TCP sender SHOULD increase cwnd by the number of - * previously unacknowledged bytes ACKed by each incoming - * acknowledgment, provided the increase is not more than L - */ - if (tp->bytes_acked < tp->mss_cache) - return; - } + int cnt; /* increase in packets */ + + /* RFC3465: ABC Slow start + * Increase only after a full MSS of bytes is acked + * + * TCP sender SHOULD increase cwnd by the number of + * previously unacknowledged bytes ACKed by each incoming + * acknowledgment, provided the increase is not more than L + */ + if (sysctl_tcp_abc && tp->bytes_acked < tp->mss_cache) + return; - if (sysctl_tcp_max_ssthresh > 0 && - tp->snd_cwnd > sysctl_tcp_max_ssthresh) - cnt += sysctl_tcp_max_ssthresh>>1; + if (sysctl_tcp_max_ssthresh > 0 && tp->snd_cwnd > sysctl_tcp_max_ssthresh) + cnt = sysctl_tcp_max_ssthresh >> 1; /* limited slow start */ else - cnt += tp->snd_cwnd; + cnt = tp->snd_cwnd; /* exponential increase */ - /* RFC3465: We MAY increase by 2 if discovered delayed ack */ + /* RFC3465: ABC + * We MAY increase by 2 if discovered delayed ack + */ if (sysctl_tcp_abc > 1 && tp->bytes_acked >= 2*tp->mss_cache) cnt <<= 1; tp->bytes_acked = 0; diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 7641b2761a1486..38cb25b48bf3b9 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -1501,6 +1501,8 @@ void tcp_enter_loss(struct sock *sk, int how) tcp_set_ca_state(sk, TCP_CA_Loss); tp->high_seq = tp->snd_nxt; TCP_ECN_queue_cwr(tp); + /* Abort FRTO algorithm if one is in progress */ + tp->frto_counter = 0; clear_all_retrans_hints(tp); } @@ -2608,6 +2610,7 @@ static void tcp_conservative_spur_to_response(struct tcp_sock *tp) { tp->snd_cwnd = min(tp->snd_cwnd, tp->snd_ssthresh); tp->snd_cwnd_cnt = 0; + TCP_ECN_queue_cwr(tp); tcp_moderate_cwnd(tp); } diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index c7ea248fae2e28..329de679ac383c 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -2154,15 +2154,6 @@ static void addrconf_dev_config(struct net_device *dev) ASSERT_RTNL(); - if ((dev->type != ARPHRD_ETHER) && - (dev->type != ARPHRD_FDDI) && - (dev->type != ARPHRD_IEEE802_TR) && - (dev->type != ARPHRD_ARCNET) && - (dev->type != ARPHRD_INFINIBAND)) { - /* Alas, we support only Ethernet autoconfiguration. */ - return; - } - idev = addrconf_add_dev(dev); if (idev == NULL) return; @@ -2250,13 +2241,33 @@ static void addrconf_ip6_tnl_config(struct net_device *dev) ip6_tnl_add_linklocal(idev); } +static int ipv6_hwtype(struct net_device *dev) +{ + if ((dev->type == ARPHRD_ETHER) || + (dev->type == ARPHRD_LOOPBACK) || + (dev->type == ARPHRD_SIT) || + (dev->type == ARPHRD_TUNNEL6) || + (dev->type == ARPHRD_FDDI) || + (dev->type == ARPHRD_IEEE802_TR) || + (dev->type == ARPHRD_ARCNET) || + (dev->type == ARPHRD_INFINIBAND)) + return 1; + + return 0; +} + static int addrconf_notify(struct notifier_block *this, unsigned long event, void * data) { struct net_device *dev = (struct net_device *) data; - struct inet6_dev *idev = __in6_dev_get(dev); + struct inet6_dev *idev; int run_pending = 0; + if (!ipv6_hwtype(dev)) + return NOTIFY_OK; + + idev = __in6_dev_get(dev); + switch(event) { case NETDEV_REGISTER: if (!idev) { diff --git a/net/ipv6/datagram.c b/net/ipv6/datagram.c index 403eee66b9c5e4..b1fe7ac5dc9006 100644 --- a/net/ipv6/datagram.c +++ b/net/ipv6/datagram.c @@ -177,8 +177,12 @@ ipv4_connected: if (final_p) ipv6_addr_copy(&fl.fl6_dst, final_p); - if ((err = xfrm_lookup(&dst, &fl, sk, 1)) < 0) - goto out; + if ((err = __xfrm_lookup(&dst, &fl, sk, 1)) < 0) { + if (err == -EREMOTE) + err = ip6_dst_blackhole(sk, &dst, &fl); + if (err < 0) + goto out; + } /* source address lookup done in ip6_dst_lookup */ diff --git a/net/ipv6/raw.c b/net/ipv6/raw.c index 009a1047fc3fab..a58459a766849f 100644 --- a/net/ipv6/raw.c +++ b/net/ipv6/raw.c @@ -818,8 +818,12 @@ static int rawv6_sendmsg(struct kiocb *iocb, struct sock *sk, if (final_p) ipv6_addr_copy(&fl.fl6_dst, final_p); - if ((err = xfrm_lookup(&dst, &fl, sk, 1)) < 0) - goto out; + if ((err = __xfrm_lookup(&dst, &fl, sk, 1)) < 0) { + if (err == -EREMOTE) + err = ip6_dst_blackhole(sk, &dst, &fl); + if (err < 0) + goto out; + } if (hlimit < 0) { if (ipv6_addr_is_multicast(&fl.fl6_dst)) diff --git a/net/ipv6/route.c b/net/ipv6/route.c index b46ad53044bac7..1324b06796c0b1 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -119,6 +119,19 @@ static struct dst_ops ip6_dst_ops = { .entry_size = sizeof(struct rt6_info), }; +static void ip6_rt_blackhole_update_pmtu(struct dst_entry *dst, u32 mtu) +{ +} + +static struct dst_ops ip6_dst_blackhole_ops = { + .family = AF_INET6, + .protocol = __constant_htons(ETH_P_IPV6), + .destroy = ip6_dst_destroy, + .check = ip6_dst_check, + .update_pmtu = ip6_rt_blackhole_update_pmtu, + .entry_size = sizeof(struct rt6_info), +}; + struct rt6_info ip6_null_entry = { .u = { .dst = { @@ -833,6 +846,54 @@ struct dst_entry * ip6_route_output(struct sock *sk, struct flowi *fl) EXPORT_SYMBOL(ip6_route_output); +static int ip6_blackhole_output(struct sk_buff *skb) +{ + kfree_skb(skb); + return 0; +} + +int ip6_dst_blackhole(struct sock *sk, struct dst_entry **dstp, struct flowi *fl) +{ + struct rt6_info *ort = (struct rt6_info *) *dstp; + struct rt6_info *rt = (struct rt6_info *) + dst_alloc(&ip6_dst_blackhole_ops); + struct dst_entry *new = NULL; + + if (rt) { + new = &rt->u.dst; + + atomic_set(&new->__refcnt, 1); + new->__use = 1; + new->input = ip6_blackhole_output; + new->output = ip6_blackhole_output; + + memcpy(new->metrics, ort->u.dst.metrics, RTAX_MAX*sizeof(u32)); + new->dev = ort->u.dst.dev; + if (new->dev) + dev_hold(new->dev); + rt->rt6i_idev = ort->rt6i_idev; + if (rt->rt6i_idev) + in6_dev_hold(rt->rt6i_idev); + rt->rt6i_expires = 0; + + ipv6_addr_copy(&rt->rt6i_gateway, &ort->rt6i_gateway); + rt->rt6i_flags = ort->rt6i_flags & ~RTF_EXPIRES; + rt->rt6i_metric = 0; + + memcpy(&rt->rt6i_dst, &ort->rt6i_dst, sizeof(struct rt6key)); +#ifdef CONFIG_IPV6_SUBTREES + memcpy(&rt->rt6i_src, &ort->rt6i_src, sizeof(struct rt6key)); +#endif + + dst_free(new); + } + + dst_release(*dstp); + *dstp = new; + return (new ? 0 : -ENOMEM); +} +EXPORT_SYMBOL_GPL(ip6_dst_blackhole); + /* * Destination cache support functions */ @@ -2495,6 +2556,8 @@ void __init ip6_route_init(void) ip6_dst_ops.kmem_cachep = kmem_cache_create("ip6_dst_cache", sizeof(struct rt6_info), 0, SLAB_HWCACHE_ALIGN|SLAB_PANIC, NULL, NULL); + ip6_dst_blackhole_ops.kmem_cachep = ip6_dst_ops.kmem_cachep; + fib6_init(); #ifdef CONFIG_PROC_FS p = proc_net_create("ipv6_route", 0, rt6_proc_info); diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c index e2f25ea43b6871..4f06a51ad4fd73 100644 --- a/net/ipv6/tcp_ipv6.c +++ b/net/ipv6/tcp_ipv6.c @@ -265,8 +265,12 @@ static int tcp_v6_connect(struct sock *sk, struct sockaddr *uaddr, if (final_p) ipv6_addr_copy(&fl.fl6_dst, final_p); - if ((err = xfrm_lookup(&dst, &fl, sk, 1)) < 0) - goto failure; + if ((err = __xfrm_lookup(&dst, &fl, sk, 1)) < 0) { + if (err == -EREMOTE) + err = ip6_dst_blackhole(sk, &dst, &fl); + if (err < 0) + goto failure; + } if (saddr == NULL) { saddr = &fl.fl6_src; diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c index a7ae59c954d5a2..d1fbddd172e76c 100644 --- a/net/ipv6/udp.c +++ b/net/ipv6/udp.c @@ -767,8 +767,12 @@ do_udp_sendmsg: if (final_p) ipv6_addr_copy(&fl.fl6_dst, final_p); - if ((err = xfrm_lookup(&dst, &fl, sk, 1)) < 0) - goto out; + if ((err = __xfrm_lookup(&dst, &fl, sk, 1)) < 0) { + if (err == -EREMOTE) + err = ip6_dst_blackhole(sk, &dst, &fl); + if (err < 0) + goto out; + } if (hlimit < 0) { if (ipv6_addr_is_multicast(&fl.fl6_dst)) diff --git a/net/ipx/af_ipx.c b/net/ipx/af_ipx.c index 15419dd682fda7..8400525177ab4c 100644 --- a/net/ipx/af_ipx.c +++ b/net/ipx/af_ipx.c @@ -87,7 +87,7 @@ extern int ipxrtr_add_route(__be32 network, struct ipx_interface *intrfc, unsigned char *node); extern void ipxrtr_del_routes(struct ipx_interface *intrfc); extern int ipxrtr_route_packet(struct sock *sk, struct sockaddr_ipx *usipx, - struct iovec *iov, int len, int noblock); + struct iovec *iov, size_t len, int noblock); extern int ipxrtr_route_skb(struct sk_buff *skb); extern struct ipx_route *ipxrtr_lookup(__be32 net); extern int ipxrtr_ioctl(unsigned int cmd, void __user *arg); diff --git a/net/key/af_key.c b/net/key/af_key.c index a99444142dc78f..d302ddae580c56 100644 --- a/net/key/af_key.c +++ b/net/key/af_key.c @@ -1448,8 +1448,6 @@ static int pfkey_add(struct sock *sk, struct sk_buff *skb, struct sadb_msg *hdr, int err; struct km_event c; - xfrm_probe_algs(); - x = pfkey_msg2xfrm_state(hdr, ext_hdrs); if (IS_ERR(x)) return PTR_ERR(x); diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c index e8b5c2d7db6235..483e927a9ca413 100644 --- a/net/netfilter/nf_conntrack_core.c +++ b/net/netfilter/nf_conntrack_core.c @@ -298,7 +298,6 @@ static void destroy_conntrack(struct nf_conntrack *nfct) { struct nf_conn *ct = (struct nf_conn *)nfct; - struct nf_conn_help *help = nfct_help(ct); struct nf_conntrack_l4proto *l4proto; typeof(nf_conntrack_destroyed) destroyed; @@ -309,9 +308,6 @@ destroy_conntrack(struct nf_conntrack *nfct) nf_conntrack_event(IPCT_DESTROY, ct); set_bit(IPS_DYING_BIT, &ct->status); - if (help && help->helper && help->helper->destroy) - help->helper->destroy(ct); - /* To make sure we don't get any weird locking issues here: * destroy_conntrack() MUST NOT be called with a write lock * to nf_conntrack_lock!!! -HW */ @@ -353,6 +349,10 @@ destroy_conntrack(struct nf_conntrack *nfct) static void death_by_timeout(unsigned long ul_conntrack) { struct nf_conn *ct = (void *)ul_conntrack; + struct nf_conn_help *help = nfct_help(ct); + + if (help && help->helper && help->helper->destroy) + help->helper->destroy(ct); write_lock_bh(&nf_conntrack_lock); /* Inside lock so preempt is disabled on module removal path. diff --git a/net/netfilter/nf_conntrack_ftp.c b/net/netfilter/nf_conntrack_ftp.c index a186799f654212..82db2aa53bfce5 100644 --- a/net/netfilter/nf_conntrack_ftp.c +++ b/net/netfilter/nf_conntrack_ftp.c @@ -48,8 +48,7 @@ unsigned int (*nf_nat_ftp_hook)(struct sk_buff **pskb, enum nf_ct_ftp_type type, unsigned int matchoff, unsigned int matchlen, - struct nf_conntrack_expect *exp, - u32 *seq); + struct nf_conntrack_expect *exp); EXPORT_SYMBOL_GPL(nf_nat_ftp_hook); #if 0 @@ -335,15 +334,17 @@ static void update_nl_seq(u32 nl_seq, struct nf_ct_ftp_master *info, int dir, if (info->seq_aft_nl[dir][i] == nl_seq) return; - if (oldest == info->seq_aft_nl_num[dir] - || before(info->seq_aft_nl[dir][i], oldest)) + if (oldest == info->seq_aft_nl_num[dir] || + before(info->seq_aft_nl[dir][i], + info->seq_aft_nl[dir][oldest])) oldest = i; } if (info->seq_aft_nl_num[dir] < NUM_SEQ_TO_REMEMBER) { info->seq_aft_nl[dir][info->seq_aft_nl_num[dir]++] = nl_seq; nf_conntrack_event_cache(IPCT_HELPINFO_VOLATILE, skb); - } else if (oldest != NUM_SEQ_TO_REMEMBER) { + } else if (oldest != NUM_SEQ_TO_REMEMBER && + after(nl_seq, info->seq_aft_nl[dir][oldest])) { info->seq_aft_nl[dir][oldest] = nl_seq; nf_conntrack_event_cache(IPCT_HELPINFO_VOLATILE, skb); } @@ -519,7 +520,7 @@ static int help(struct sk_buff **pskb, nf_nat_ftp = rcu_dereference(nf_nat_ftp_hook); if (nf_nat_ftp && ct->status & IPS_NAT_MASK) ret = nf_nat_ftp(pskb, ctinfo, search[dir][i].ftptype, - matchoff, matchlen, exp, &seq); + matchoff, matchlen, exp); else { /* Can't expect this? Best to drop packet now. */ if (nf_conntrack_expect_related(exp) != 0) diff --git a/net/netfilter/nf_conntrack_h323_main.c b/net/netfilter/nf_conntrack_h323_main.c index b284db73ca7ce9..a1b95acad29747 100644 --- a/net/netfilter/nf_conntrack_h323_main.c +++ b/net/netfilter/nf_conntrack_h323_main.c @@ -520,6 +520,16 @@ static int process_olca(struct sk_buff **pskb, struct nf_conn *ct, } } + if ((olca->options & eOpenLogicalChannelAck_separateStack) && + olca->separateStack.networkAddress.choice == + eNetworkAccessParameters_networkAddress_localAreaAddress) { + ret = expect_t120(pskb, ct, ctinfo, data, dataoff, + &olca->separateStack.networkAddress. + localAreaAddress); + if (ret < 0) + return -1; + } + return 0; } @@ -640,7 +650,7 @@ int get_h225_addr(struct nf_conn *ct, unsigned char *data, case eTransportAddress_ip6Address: if (family != AF_INET6) return 0; - p = data + taddr->ip6Address.ip6; + p = data + taddr->ip6Address.ip; len = 16; break; default: @@ -977,30 +987,6 @@ static int process_alerting(struct sk_buff **pskb, struct nf_conn *ct, } /****************************************************************************/ -static int process_information(struct sk_buff **pskb, - struct nf_conn *ct, - enum ip_conntrack_info ctinfo, - unsigned char **data, int dataoff, - Information_UUIE *info) -{ - int ret; - int i; - - DEBUGP("nf_ct_q931: Information\n"); - - if (info->options & eInformation_UUIE_fastStart) { - for (i = 0; i < info->fastStart.count; i++) { - ret = process_olc(pskb, ct, ctinfo, data, dataoff, - &info->fastStart.item[i]); - if (ret < 0) - return -1; - } - } - - return 0; -} - -/****************************************************************************/ static int process_facility(struct sk_buff **pskb, struct nf_conn *ct, enum ip_conntrack_info ctinfo, unsigned char **data, int dataoff, @@ -1096,11 +1082,6 @@ static int process_q931(struct sk_buff **pskb, struct nf_conn *ct, ret = process_alerting(pskb, ct, ctinfo, data, dataoff, &pdu->h323_message_body.alerting); break; - case eH323_UU_PDU_h323_message_body_information: - ret = process_information(pskb, ct, ctinfo, data, dataoff, - &pdu->h323_message_body. - information); - break; case eH323_UU_PDU_h323_message_body_facility: ret = process_facility(pskb, ct, ctinfo, data, dataoff, &pdu->h323_message_body.facility); diff --git a/net/netfilter/nf_conntrack_h323_types.c b/net/netfilter/nf_conntrack_h323_types.c index 4c6f8b3b12083c..3a21fdf1a2654c 100644 --- a/net/netfilter/nf_conntrack_h323_types.c +++ b/net/netfilter/nf_conntrack_h323_types.c @@ -1,4 +1,4 @@ -/* Generated by Jing Min Zhao's ASN.1 parser, Apr 20 2006 +/* Generated by Jing Min Zhao's ASN.1 parser, May 16 2007 * * Copyright (c) 2006 Jing Min Zhao <zhaojingmin@users.sourceforge.net> * @@ -37,7 +37,7 @@ static field_t _TransportAddress_ipxAddress[] = { /* SEQUENCE */ static field_t _TransportAddress_ip6Address[] = { /* SEQUENCE */ {FNAME("ip") OCTSTR, FIXD, 16, 0, DECODE, - offsetof(TransportAddress_ip6Address, ip6), NULL}, + offsetof(TransportAddress_ip6Address, ip), NULL}, {FNAME("port") INT, WORD, 0, 0, SKIP, 0, NULL}, }; @@ -67,7 +67,8 @@ static field_t _TransportAddress[] = { /* CHOICE */ {FNAME("ipxAddress") SEQ, 0, 3, 3, SKIP, 0, _TransportAddress_ipxAddress}, {FNAME("ip6Address") SEQ, 0, 2, 2, DECODE | EXT, - offsetof(TransportAddress, ip6Address), _TransportAddress_ip6Address}, + offsetof(TransportAddress, ip6Address), + _TransportAddress_ip6Address}, {FNAME("netBios") OCTSTR, FIXD, 16, 0, SKIP, 0, NULL}, {FNAME("nsap") OCTSTR, 5, 1, 0, SKIP, 0, NULL}, {FNAME("nonStandardAddress") SEQ, 0, 2, 2, SKIP, 0, @@ -638,7 +639,8 @@ static field_t _UnicastAddress_iPXAddress[] = { /* SEQUENCE */ }; static field_t _UnicastAddress_iP6Address[] = { /* SEQUENCE */ - {FNAME("network") OCTSTR, FIXD, 16, 0, SKIP, 0, NULL}, + {FNAME("network") OCTSTR, FIXD, 16, 0, DECODE, + offsetof(UnicastAddress_iP6Address, network), NULL}, {FNAME("tsapIdentifier") INT, WORD, 0, 0, SKIP, 0, NULL}, }; @@ -665,8 +667,8 @@ static field_t _UnicastAddress[] = { /* CHOICE */ offsetof(UnicastAddress, iPAddress), _UnicastAddress_iPAddress}, {FNAME("iPXAddress") SEQ, 0, 3, 3, SKIP | EXT, 0, _UnicastAddress_iPXAddress}, - {FNAME("iP6Address") SEQ, 0, 2, 2, SKIP | EXT, 0, - _UnicastAddress_iP6Address}, + {FNAME("iP6Address") SEQ, 0, 2, 2, DECODE | EXT, + offsetof(UnicastAddress, iP6Address), _UnicastAddress_iP6Address}, {FNAME("netBios") OCTSTR, FIXD, 16, 0, SKIP, 0, NULL}, {FNAME("iPSourceRouteAddress") SEQ, 0, 4, 4, SKIP | EXT, 0, _UnicastAddress_iPSourceRouteAddress}, @@ -984,19 +986,12 @@ static field_t _Alerting_UUIE[] = { /* SEQUENCE */ {FNAME("featureSet") SEQ, 3, 4, 4, SKIP | EXT | OPT, 0, NULL}, }; -static field_t _Information_UUIE_fastStart[] = { /* SEQUENCE OF */ - {FNAME("item") SEQ, 1, 3, 5, DECODE | OPEN | EXT, - sizeof(OpenLogicalChannel), _OpenLogicalChannel} - , -}; - static field_t _Information_UUIE[] = { /* SEQUENCE */ {FNAME("protocolIdentifier") OID, BYTE, 0, 0, SKIP, 0, NULL}, {FNAME("callIdentifier") SEQ, 0, 1, 1, SKIP | EXT, 0, NULL}, {FNAME("tokens") SEQOF, SEMI, 0, 0, SKIP | OPT, 0, NULL}, {FNAME("cryptoTokens") SEQOF, SEMI, 0, 0, SKIP | OPT, 0, NULL}, - {FNAME("fastStart") SEQOF, SEMI, 0, 30, DECODE | OPT, - offsetof(Information_UUIE, fastStart), _Information_UUIE_fastStart}, + {FNAME("fastStart") SEQOF, SEMI, 0, 30, SKIP | OPT, 0, NULL}, {FNAME("fastConnectRefused") NUL, FIXD, 0, 0, SKIP | OPT, 0, NULL}, {FNAME("circuitInfo") SEQ, 3, 3, 3, SKIP | EXT | OPT, 0, NULL}, }; @@ -1343,9 +1338,7 @@ static field_t _H323_UU_PDU_h323_message_body[] = { /* CHOICE */ offsetof(H323_UU_PDU_h323_message_body, connect), _Connect_UUIE}, {FNAME("alerting") SEQ, 1, 3, 17, DECODE | EXT, offsetof(H323_UU_PDU_h323_message_body, alerting), _Alerting_UUIE}, - {FNAME("information") SEQ, 0, 1, 7, DECODE | EXT, - offsetof(H323_UU_PDU_h323_message_body, information), - _Information_UUIE}, + {FNAME("information") SEQ, 0, 1, 7, SKIP | EXT, 0, _Information_UUIE}, {FNAME("releaseComplete") SEQ, 1, 2, 11, SKIP | EXT, 0, _ReleaseComplete_UUIE}, {FNAME("facility") SEQ, 3, 5, 21, DECODE | EXT, @@ -1430,7 +1423,9 @@ static field_t _OpenLogicalChannelAck[] = { /* SEQUENCE */ DECODE | EXT | OPT, offsetof(OpenLogicalChannelAck, reverseLogicalChannelParameters), _OpenLogicalChannelAck_reverseLogicalChannelParameters}, - {FNAME("separateStack") SEQ, 2, 4, 5, SKIP | EXT | OPT, 0, NULL}, + {FNAME("separateStack") SEQ, 2, 4, 5, DECODE | EXT | OPT, + offsetof(OpenLogicalChannelAck, separateStack), + _NetworkAccessParameters}, {FNAME("forwardMultiplexAckParameters") CHOICE, 0, 1, 1, DECODE | EXT | OPT, offsetof(OpenLogicalChannelAck, forwardMultiplexAckParameters), diff --git a/net/rfkill/rfkill.c b/net/rfkill/rfkill.c index a973603e388028..f3986d498b4088 100644 --- a/net/rfkill/rfkill.c +++ b/net/rfkill/rfkill.c @@ -296,7 +296,7 @@ struct rfkill *rfkill_allocate(struct device *parent, enum rfkill_type type) struct device *dev; rfkill = kzalloc(sizeof(struct rfkill), GFP_KERNEL); - if (rfkill) + if (!rfkill) return NULL; mutex_init(&rfkill->mutex); diff --git a/net/rxrpc/Kconfig b/net/rxrpc/Kconfig index 91b3d52f6f1a45..e662f1d076641c 100644 --- a/net/rxrpc/Kconfig +++ b/net/rxrpc/Kconfig @@ -4,7 +4,7 @@ config AF_RXRPC tristate "RxRPC session sockets" - depends on EXPERIMENTAL + depends on INET && EXPERIMENTAL select KEYS help Say Y or M here to include support for RxRPC session sockets (just diff --git a/net/rxrpc/ar-call.c b/net/rxrpc/ar-call.c index 4d92d88ff1fc81..3c04b00dab7493 100644 --- a/net/rxrpc/ar-call.c +++ b/net/rxrpc/ar-call.c @@ -15,6 +15,25 @@ #include <net/af_rxrpc.h> #include "ar-internal.h" +const char *rxrpc_call_states[] = { + [RXRPC_CALL_CLIENT_SEND_REQUEST] = "ClSndReq", + [RXRPC_CALL_CLIENT_AWAIT_REPLY] = "ClAwtRpl", + [RXRPC_CALL_CLIENT_RECV_REPLY] = "ClRcvRpl", + [RXRPC_CALL_CLIENT_FINAL_ACK] = "ClFnlACK", + [RXRPC_CALL_SERVER_SECURING] = "SvSecure", + [RXRPC_CALL_SERVER_ACCEPTING] = "SvAccept", + [RXRPC_CALL_SERVER_RECV_REQUEST] = "SvRcvReq", + [RXRPC_CALL_SERVER_ACK_REQUEST] = "SvAckReq", + [RXRPC_CALL_SERVER_SEND_REPLY] = "SvSndRpl", + [RXRPC_CALL_SERVER_AWAIT_ACK] = "SvAwtACK", + [RXRPC_CALL_COMPLETE] = "Complete", + [RXRPC_CALL_SERVER_BUSY] = "SvBusy ", + [RXRPC_CALL_REMOTELY_ABORTED] = "RmtAbort", + [RXRPC_CALL_LOCALLY_ABORTED] = "LocAbort", + [RXRPC_CALL_NETWORK_ERROR] = "NetError", + [RXRPC_CALL_DEAD] = "Dead ", +}; + struct kmem_cache *rxrpc_call_jar; LIST_HEAD(rxrpc_calls); DEFINE_RWLOCK(rxrpc_call_lock); diff --git a/net/rxrpc/ar-proc.c b/net/rxrpc/ar-proc.c index 58f4b4e5cece40..1c0be0e77b1629 100644 --- a/net/rxrpc/ar-proc.c +++ b/net/rxrpc/ar-proc.c @@ -25,25 +25,6 @@ static const char *rxrpc_conn_states[] = { [RXRPC_CONN_NETWORK_ERROR] = "NetError", }; -const char *rxrpc_call_states[] = { - [RXRPC_CALL_CLIENT_SEND_REQUEST] = "ClSndReq", - [RXRPC_CALL_CLIENT_AWAIT_REPLY] = "ClAwtRpl", - [RXRPC_CALL_CLIENT_RECV_REPLY] = "ClRcvRpl", - [RXRPC_CALL_CLIENT_FINAL_ACK] = "ClFnlACK", - [RXRPC_CALL_SERVER_SECURING] = "SvSecure", - [RXRPC_CALL_SERVER_ACCEPTING] = "SvAccept", - [RXRPC_CALL_SERVER_RECV_REQUEST] = "SvRcvReq", - [RXRPC_CALL_SERVER_ACK_REQUEST] = "SvAckReq", - [RXRPC_CALL_SERVER_SEND_REPLY] = "SvSndRpl", - [RXRPC_CALL_SERVER_AWAIT_ACK] = "SvAwtACK", - [RXRPC_CALL_COMPLETE] = "Complete", - [RXRPC_CALL_SERVER_BUSY] = "SvBusy ", - [RXRPC_CALL_REMOTELY_ABORTED] = "RmtAbort", - [RXRPC_CALL_LOCALLY_ABORTED] = "LocAbort", - [RXRPC_CALL_NETWORK_ERROR] = "NetError", - [RXRPC_CALL_DEAD] = "Dead ", -}; - /* * generate a list of extant and dead calls in /proc/net/rxrpc_calls */ diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c index f28bb2dc58d0af..cbefe225581e0b 100644 --- a/net/sched/sch_generic.c +++ b/net/sched/sch_generic.c @@ -169,8 +169,8 @@ requeue: else q->ops->requeue(skb, q); netif_schedule(dev); - return 0; } + return 0; out: BUG_ON((int) q->q.qlen < 0); diff --git a/net/sched/sch_htb.c b/net/sched/sch_htb.c index 99bcec8dd04c1a..035788c5b7f8a7 100644 --- a/net/sched/sch_htb.c +++ b/net/sched/sch_htb.c @@ -976,8 +976,9 @@ static struct sk_buff *htb_dequeue(struct Qdisc *sch) if (q->now >= q->near_ev_cache[level]) { event = htb_do_events(q, level); - q->near_ev_cache[level] = event ? event : - PSCHED_TICKS_PER_SEC; + if (!event) + event = q->now + PSCHED_TICKS_PER_SEC; + q->near_ev_cache[level] = event; } else event = q->near_ev_cache[level]; diff --git a/net/sctp/Kconfig b/net/sctp/Kconfig index 9cba49e2ad4318..8210f549c49299 100644 --- a/net/sctp/Kconfig +++ b/net/sctp/Kconfig @@ -2,11 +2,9 @@ # SCTP configuration # -menu "SCTP Configuration (EXPERIMENTAL)" - depends on INET && EXPERIMENTAL - -config IP_SCTP +menuconfig IP_SCTP tristate "The SCTP Protocol (EXPERIMENTAL)" + depends on INET && EXPERIMENTAL depends on IPV6 || IPV6=n select CRYPTO if SCTP_HMAC_SHA1 || SCTP_HMAC_MD5 select CRYPTO_HMAC if SCTP_HMAC_SHA1 || SCTP_HMAC_MD5 @@ -36,9 +34,10 @@ config IP_SCTP If in doubt, say N. +if IP_SCTP + config SCTP_DBG_MSG bool "SCTP: Debug messages" - depends on IP_SCTP help If you say Y, this will enable verbose debugging messages. @@ -47,7 +46,6 @@ config SCTP_DBG_MSG config SCTP_DBG_OBJCNT bool "SCTP: Debug object counts" - depends on IP_SCTP help If you say Y, this will enable debugging support for counting the type of objects that are currently allocated. This is useful for @@ -59,7 +57,6 @@ config SCTP_DBG_OBJCNT choice prompt "SCTP: Cookie HMAC Algorithm" - depends on IP_SCTP default SCTP_HMAC_MD5 help HMAC algorithm to be used during association initialization. It @@ -86,4 +83,5 @@ config SCTP_HMAC_MD5 advised to use either HMAC-MD5 or HMAC-SHA1. endchoice -endmenu + +endif # IP_SCTP diff --git a/net/socket.c b/net/socket.c index 98a8f67abbfcfe..f4530196a70a30 100644 --- a/net/socket.c +++ b/net/socket.c @@ -261,8 +261,7 @@ static void init_once(void *foo, struct kmem_cache *cachep, unsigned long flags) { struct socket_alloc *ei = (struct socket_alloc *)foo; - if (flags & SLAB_CTOR_CONSTRUCTOR) - inode_init_once(&ei->vfs_inode); + inode_init_once(&ei->vfs_inode); } static int init_inodecache(void) diff --git a/net/sunrpc/rpc_pipe.c b/net/sunrpc/rpc_pipe.c index a2f1893bde53e4..5887457dc936d0 100644 --- a/net/sunrpc/rpc_pipe.c +++ b/net/sunrpc/rpc_pipe.c @@ -828,19 +828,17 @@ init_once(void * foo, struct kmem_cache * cachep, unsigned long flags) { struct rpc_inode *rpci = (struct rpc_inode *) foo; - if (flags & SLAB_CTOR_CONSTRUCTOR) { - inode_init_once(&rpci->vfs_inode); - rpci->private = NULL; - rpci->nreaders = 0; - rpci->nwriters = 0; - INIT_LIST_HEAD(&rpci->in_upcall); - INIT_LIST_HEAD(&rpci->pipe); - rpci->pipelen = 0; - init_waitqueue_head(&rpci->waitq); - INIT_DELAYED_WORK(&rpci->queue_timeout, - rpc_timeout_upcall_queue); - rpci->ops = NULL; - } + inode_init_once(&rpci->vfs_inode); + rpci->private = NULL; + rpci->nreaders = 0; + rpci->nwriters = 0; + INIT_LIST_HEAD(&rpci->in_upcall); + INIT_LIST_HEAD(&rpci->pipe); + rpci->pipelen = 0; + init_waitqueue_head(&rpci->waitq); + INIT_DELAYED_WORK(&rpci->queue_timeout, + rpc_timeout_upcall_queue); + rpci->ops = NULL; } int register_rpc_pipefs(void) diff --git a/net/sunrpc/sched.c b/net/sunrpc/sched.c index b011eb625e49ca..944d75396fb3a3 100644 --- a/net/sunrpc/sched.c +++ b/net/sunrpc/sched.c @@ -989,8 +989,6 @@ void rpc_killall_tasks(struct rpc_clnt *clnt) spin_unlock(&rpc_sched_lock); } -static DECLARE_MUTEX_LOCKED(rpciod_running); - static void rpciod_killall(void) { unsigned long flags; diff --git a/net/sunrpc/sunrpc_syms.c b/net/sunrpc/sunrpc_syms.c index 0d35bc796d0034..73075dec83c07e 100644 --- a/net/sunrpc/sunrpc_syms.c +++ b/net/sunrpc/sunrpc_syms.c @@ -134,11 +134,7 @@ EXPORT_SYMBOL(nfsd_debug); EXPORT_SYMBOL(nlm_debug); #endif -extern int register_rpc_pipefs(void); -extern void unregister_rpc_pipefs(void); extern struct cache_detail ip_map_cache, unix_gid_cache; -extern int init_socket_xprt(void); -extern void cleanup_socket_xprt(void); static int __init init_sunrpc(void) diff --git a/net/tipc/Kconfig b/net/tipc/Kconfig index f9e367d946eb69..3b30d1130b615f 100644 --- a/net/tipc/Kconfig +++ b/net/tipc/Kconfig @@ -2,11 +2,9 @@ # TIPC configuration # -menu "TIPC Configuration (EXPERIMENTAL)" - depends on INET && EXPERIMENTAL - -config TIPC +menuconfig TIPC tristate "The TIPC Protocol (EXPERIMENTAL)" + depends on INET && EXPERIMENTAL ---help--- The Transparent Inter Process Communication (TIPC) protocol is specially designed for intra cluster communication. This protocol @@ -22,9 +20,10 @@ config TIPC If in doubt, say N. +if TIPC + config TIPC_ADVANCED bool "TIPC: Advanced configuration" - depends on TIPC default n help Saying Y here will open some advanced configuration @@ -33,7 +32,7 @@ config TIPC_ADVANCED config TIPC_ZONES int "Maximum number of zones in network" - depends on TIPC && TIPC_ADVANCED + depends on TIPC_ADVANCED default "3" help Max number of zones inside TIPC network. Max supported value @@ -44,7 +43,7 @@ config TIPC_ZONES config TIPC_CLUSTERS int "Maximum number of clusters in a zone" - depends on TIPC && TIPC_ADVANCED + depends on TIPC_ADVANCED default "1" help ***Only 1 (one cluster in a zone) is supported by current code. @@ -59,7 +58,7 @@ config TIPC_CLUSTERS config TIPC_NODES int "Maximum number of nodes in cluster" - depends on TIPC && TIPC_ADVANCED + depends on TIPC_ADVANCED default "255" help Maximum number of nodes inside a TIPC cluster. Maximum @@ -70,7 +69,7 @@ config TIPC_NODES config TIPC_SLAVE_NODES int "Maximum number of slave nodes in cluster" - depends on TIPC && TIPC_ADVANCED + depends on TIPC_ADVANCED default "0" help ***This capability is not supported by current code.*** @@ -83,7 +82,7 @@ config TIPC_SLAVE_NODES config TIPC_PORTS int "Maximum number of ports in a node" - depends on TIPC && TIPC_ADVANCED + depends on TIPC_ADVANCED default "8191" help Maximum number of ports within a node. Maximum @@ -94,7 +93,7 @@ config TIPC_PORTS config TIPC_LOG int "Size of log buffer" - depends on TIPC && TIPC_ADVANCED + depends on TIPC_ADVANCED default 0 help Size (in bytes) of TIPC's internal log buffer, which records the @@ -106,7 +105,6 @@ config TIPC_LOG config TIPC_DEBUG bool "Enable debugging support" - depends on TIPC default n help This will enable debugging of TIPC. @@ -114,4 +112,4 @@ config TIPC_DEBUG Only say Y here if you are having trouble with TIPC. It will enable the display of detailed information about what is going on. -endmenu +endif # TIPC diff --git a/net/tipc/eth_media.c b/net/tipc/eth_media.c index 0ee6ded18f3a50..77d2d9ce896248 100644 --- a/net/tipc/eth_media.c +++ b/net/tipc/eth_media.c @@ -120,18 +120,20 @@ static int recv_msg(struct sk_buff *buf, struct net_device *dev, static int enable_bearer(struct tipc_bearer *tb_ptr) { - struct net_device *dev, *pdev; + struct net_device *dev = NULL; + struct net_device *pdev = NULL; struct eth_bearer *eb_ptr = ð_bearers[0]; struct eth_bearer *stop = ð_bearers[MAX_ETH_BEARERS]; char *driver_name = strchr((const char *)tb_ptr->name, ':') + 1; /* Find device with specified name */ - dev = NULL; - for_each_netdev(pdev) - if (!strncmp(dev->name, driver_name, IFNAMSIZ)) { + + for_each_netdev(pdev){ + if (!strncmp(pdev->name, driver_name, IFNAMSIZ)) { dev = pdev; break; } + } if (!dev) return -ENODEV; diff --git a/net/xfrm/xfrm_algo.c b/net/xfrm/xfrm_algo.c index 6249a9405bb83b..5ced62c19c63e1 100644 --- a/net/xfrm/xfrm_algo.c +++ b/net/xfrm/xfrm_algo.c @@ -347,67 +347,44 @@ static inline int calg_entries(void) return ARRAY_SIZE(calg_list); } -/* Todo: generic iterators */ -struct xfrm_algo_desc *xfrm_aalg_get_byid(int alg_id) -{ - int i; - - for (i = 0; i < aalg_entries(); i++) { - if (aalg_list[i].desc.sadb_alg_id == alg_id) { - if (aalg_list[i].available) - return &aalg_list[i]; - else - break; - } - } - return NULL; -} -EXPORT_SYMBOL_GPL(xfrm_aalg_get_byid); - -struct xfrm_algo_desc *xfrm_ealg_get_byid(int alg_id) -{ - int i; +struct xfrm_algo_list { + struct xfrm_algo_desc *algs; + int entries; + u32 type; + u32 mask; +}; - for (i = 0; i < ealg_entries(); i++) { - if (ealg_list[i].desc.sadb_alg_id == alg_id) { - if (ealg_list[i].available) - return &ealg_list[i]; - else - break; - } - } - return NULL; -} -EXPORT_SYMBOL_GPL(xfrm_ealg_get_byid); +static const struct xfrm_algo_list xfrm_aalg_list = { + .algs = aalg_list, + .entries = ARRAY_SIZE(aalg_list), + .type = CRYPTO_ALG_TYPE_HASH, + .mask = CRYPTO_ALG_TYPE_HASH_MASK | CRYPTO_ALG_ASYNC, +}; -struct xfrm_algo_desc *xfrm_calg_get_byid(int alg_id) -{ - int i; +static const struct xfrm_algo_list xfrm_ealg_list = { + .algs = ealg_list, + .entries = ARRAY_SIZE(ealg_list), + .type = CRYPTO_ALG_TYPE_BLKCIPHER, + .mask = CRYPTO_ALG_TYPE_MASK | CRYPTO_ALG_ASYNC, +}; - for (i = 0; i < calg_entries(); i++) { - if (calg_list[i].desc.sadb_alg_id == alg_id) { - if (calg_list[i].available) - return &calg_list[i]; - else - break; - } - } - return NULL; -} -EXPORT_SYMBOL_GPL(xfrm_calg_get_byid); +static const struct xfrm_algo_list xfrm_calg_list = { + .algs = calg_list, + .entries = ARRAY_SIZE(calg_list), + .type = CRYPTO_ALG_TYPE_COMPRESS, + .mask = CRYPTO_ALG_TYPE_MASK | CRYPTO_ALG_ASYNC, +}; -static struct xfrm_algo_desc *xfrm_get_byname(struct xfrm_algo_desc *list, - int entries, u32 type, u32 mask, - char *name, int probe) +static struct xfrm_algo_desc *xfrm_find_algo( + const struct xfrm_algo_list *algo_list, + int match(const struct xfrm_algo_desc *entry, const void *data), + const void *data, int probe) { + struct xfrm_algo_desc *list = algo_list->algs; int i, status; - if (!name) - return NULL; - - for (i = 0; i < entries; i++) { - if (strcmp(name, list[i].name) && - (!list[i].compat || strcmp(name, list[i].compat))) + for (i = 0; i < algo_list->entries; i++) { + if (!match(list + i, data)) continue; if (list[i].available) @@ -416,8 +393,8 @@ static struct xfrm_algo_desc *xfrm_get_byname(struct xfrm_algo_desc *list, if (!probe) break; - status = crypto_has_alg(list[i].name, type, - mask | CRYPTO_ALG_ASYNC); + status = crypto_has_alg(list[i].name, algo_list->type, + algo_list->mask); if (!status) break; @@ -427,27 +404,60 @@ static struct xfrm_algo_desc *xfrm_get_byname(struct xfrm_algo_desc *list, return NULL; } +static int xfrm_alg_id_match(const struct xfrm_algo_desc *entry, + const void *data) +{ + return entry->desc.sadb_alg_id == (unsigned long)data; +} + +struct xfrm_algo_desc *xfrm_aalg_get_byid(int alg_id) +{ + return xfrm_find_algo(&xfrm_aalg_list, xfrm_alg_id_match, + (void *)(unsigned long)alg_id, 1); +} +EXPORT_SYMBOL_GPL(xfrm_aalg_get_byid); + +struct xfrm_algo_desc *xfrm_ealg_get_byid(int alg_id) +{ + return xfrm_find_algo(&xfrm_ealg_list, xfrm_alg_id_match, + (void *)(unsigned long)alg_id, 1); +} +EXPORT_SYMBOL_GPL(xfrm_ealg_get_byid); + +struct xfrm_algo_desc *xfrm_calg_get_byid(int alg_id) +{ + return xfrm_find_algo(&xfrm_calg_list, xfrm_alg_id_match, + (void *)(unsigned long)alg_id, 1); +} +EXPORT_SYMBOL_GPL(xfrm_calg_get_byid); + +static int xfrm_alg_name_match(const struct xfrm_algo_desc *entry, + const void *data) +{ + const char *name = data; + + return name && (!strcmp(name, entry->name) || + (entry->compat && !strcmp(name, entry->compat))); +} + struct xfrm_algo_desc *xfrm_aalg_get_byname(char *name, int probe) { - return xfrm_get_byname(aalg_list, aalg_entries(), - CRYPTO_ALG_TYPE_HASH, CRYPTO_ALG_TYPE_HASH_MASK, - name, probe); + return xfrm_find_algo(&xfrm_aalg_list, xfrm_alg_name_match, name, + probe); } EXPORT_SYMBOL_GPL(xfrm_aalg_get_byname); struct xfrm_algo_desc *xfrm_ealg_get_byname(char *name, int probe) { - return xfrm_get_byname(ealg_list, ealg_entries(), - CRYPTO_ALG_TYPE_BLKCIPHER, CRYPTO_ALG_TYPE_MASK, - name, probe); + return xfrm_find_algo(&xfrm_ealg_list, xfrm_alg_name_match, name, + probe); } EXPORT_SYMBOL_GPL(xfrm_ealg_get_byname); struct xfrm_algo_desc *xfrm_calg_get_byname(char *name, int probe) { - return xfrm_get_byname(calg_list, calg_entries(), - CRYPTO_ALG_TYPE_COMPRESS, CRYPTO_ALG_TYPE_MASK, - name, probe); + return xfrm_find_algo(&xfrm_calg_list, xfrm_alg_name_match, name, + probe); } EXPORT_SYMBOL_GPL(xfrm_calg_get_byname); diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c index d0882e53b6fced..b8bab89616a069 100644 --- a/net/xfrm/xfrm_policy.c +++ b/net/xfrm/xfrm_policy.c @@ -29,6 +29,8 @@ #include "xfrm_hash.h" +int sysctl_xfrm_larval_drop; + DEFINE_MUTEX(xfrm_cfg_mutex); EXPORT_SYMBOL(xfrm_cfg_mutex); @@ -1390,8 +1392,8 @@ static int stale_bundle(struct dst_entry *dst); * At the moment we eat a raw IP route. Mostly to speed up lookups * on interfaces with disabled IPsec. */ -int xfrm_lookup(struct dst_entry **dst_p, struct flowi *fl, - struct sock *sk, int flags) +int __xfrm_lookup(struct dst_entry **dst_p, struct flowi *fl, + struct sock *sk, int flags) { struct xfrm_policy *policy; struct xfrm_policy *pols[XFRM_POLICY_TYPE_MAX]; @@ -1509,6 +1511,13 @@ restart: if (unlikely(nx<0)) { err = nx; + if (err == -EAGAIN && sysctl_xfrm_larval_drop) { + /* EREMOTE tells the caller to generate + * a one-shot blackhole route. + */ + xfrm_pol_put(policy); + return -EREMOTE; + } if (err == -EAGAIN && flags) { DECLARE_WAITQUEUE(wait, current); @@ -1598,6 +1607,21 @@ error: *dst_p = NULL; return err; } +EXPORT_SYMBOL(__xfrm_lookup); + +int xfrm_lookup(struct dst_entry **dst_p, struct flowi *fl, + struct sock *sk, int flags) +{ + int err = __xfrm_lookup(dst_p, fl, sk, flags); + + if (err == -EREMOTE) { + dst_release(*dst_p); + *dst_p = NULL; + err = -EAGAIN; + } + + return err; +} EXPORT_SYMBOL(xfrm_lookup); static inline int diff --git a/scripts/Makefile.headersinst b/scripts/Makefile.headersinst index f7b6705fd6a370..8cd63014a0d16c 100644 --- a/scripts/Makefile.headersinst +++ b/scripts/Makefile.headersinst @@ -144,7 +144,7 @@ $(check-y) : $(INSTALL_HDR_PATH)/$(_dst)/.check.%.h : $(INSTALL_HDR_PATH)/$(_dst $(call cmd,check) # Other dependencies for $(check-y) --include /dev/null $(check-y) +include /dev/null $(wildcard $(check-y)) # ... but leave $(check-y) as .PHONY for now until those deps are actually correct. .PHONY: $(check-y) diff --git a/scripts/kconfig/lxdialog/check-lxdialog.sh b/scripts/kconfig/lxdialog/check-lxdialog.sh index 120d624e672c57..cdca7388e0f1f9 100644 --- a/scripts/kconfig/lxdialog/check-lxdialog.sh +++ b/scripts/kconfig/lxdialog/check-lxdialog.sh @@ -4,21 +4,15 @@ # What library to link ldflags() { - $cc -print-file-name=libncursesw.so | grep -q / - if [ $? -eq 0 ]; then - echo '-lncursesw' - exit - fi - $cc -print-file-name=libncurses.so | grep -q / - if [ $? -eq 0 ]; then - echo '-lncurses' - exit - fi - $cc -print-file-name=libcurses.so | grep -q / - if [ $? -eq 0 ]; then - echo '-lcurses' - exit - fi + for ext in so a dylib ; do + for lib in ncursesw ncurses curses ; do + $cc -print-file-name=lib${lib}.${ext} | grep -q / + if [ $? -eq 0 ]; then + echo "-l${lib}" + exit + fi + done + done exit 1 } diff --git a/scripts/mod/file2alias.c b/scripts/mod/file2alias.c index ed1244dd58d091..f646381dc0159c 100644 --- a/scripts/mod/file2alias.c +++ b/scripts/mod/file2alias.c @@ -353,11 +353,16 @@ static int do_pcmcia_entry(const char *filename, static int do_of_entry (const char *filename, struct of_device_id *of, char *alias) { + int len; char *tmp; - sprintf (alias, "of:N%sT%sC%s", + len = sprintf (alias, "of:N%sT%s", of->name[0] ? of->name : "*", - of->type[0] ? of->type : "*", - of->compatible[0] ? of->compatible : "*"); + of->type[0] ? of->type : "*"); + + if (of->compatible[0]) + sprintf (&alias[len], "%sC%s", + of->type[0] ? "*" : "", + of->compatible); /* Replace all whitespace with underscores */ for (tmp = alias; tmp && *tmp; tmp++) diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c index 113dc77b9f60f9..8e5610d428c55a 100644 --- a/scripts/mod/modpost.c +++ b/scripts/mod/modpost.c @@ -582,6 +582,12 @@ static int strrcmp(const char *s, const char *sub) /** * Whitelist to allow certain references to pass with no warning. + * + * Pattern 0: + * Do not warn if funtion/data are marked with __init_refok/__initdata_refok. + * The pattern is identified by: + * fromsec = .text.init.refok | .data.init.refok + * * Pattern 1: * If a module parameter is declared __initdata and permissions=0 * then this is legal despite the warning generated. @@ -619,14 +625,6 @@ static int strrcmp(const char *s, const char *sub) * This pattern is identified by * refsymname = __init_begin, _sinittext, _einittext * - * Pattern 6: - * During the early init phase we have references from .init.text to - * .text we have an intended section mismatch - do not warn about it. - * See kernel_init() in init/main.c - * tosec = .init.text - * fromsec = .text - * atsym = kernel_init - * * Pattern 7: * Logos used in drivers/video/logo reside in __initdata but the * funtion that references them are EXPORT_SYMBOL() so cannot be @@ -642,16 +640,11 @@ static int strrcmp(const char *s, const char *sub) * tosec = .init.text * fromsec = .paravirtprobe * - * Pattern 9: - * Some of functions are common code between boot time and hotplug - * time. The bootmem allocater is called only boot time in its - * functions. So it's ok to reference. - * tosec = .init.text - * * Pattern 10: - * ia64 has machvec table for each platform. It is mixture of function - * pointer of .init.text and .text. - * fromsec = .machvec + * ia64 has machvec table for each platform and + * powerpc has a machine desc table for each platform. + * It is mixture of function pointers of .init.text and .text. + * fromsec = .machvec | .machine.desc **/ static int secref_whitelist(const char *modname, const char *tosec, const char *fromsec, const char *atsym, @@ -678,11 +671,10 @@ static int secref_whitelist(const char *modname, const char *tosec, NULL }; - const char *pat4sym[] = { - "sparse_index_alloc", - "zone_wait_table_init", - NULL - }; + /* Check for pattern 0 */ + if ((strcmp(fromsec, ".text.init.refok") == 0) || + (strcmp(fromsec, ".data.init.refok") == 0)) + return 1; /* Check for pattern 1 */ if (strcmp(tosec, ".init.data") != 0) @@ -725,12 +717,6 @@ static int secref_whitelist(const char *modname, const char *tosec, if (strcmp(refsymname, *s) == 0) return 1; - /* Check for pattern 6 */ - if ((strcmp(tosec, ".init.text") == 0) && - (strcmp(fromsec, ".text") == 0) && - (strcmp(refsymname, "kernel_init") == 0)) - return 1; - /* Check for pattern 7 */ if ((strcmp(tosec, ".init.data") == 0) && (strncmp(fromsec, ".text", strlen(".text")) == 0) && @@ -742,15 +728,9 @@ static int secref_whitelist(const char *modname, const char *tosec, (strcmp(fromsec, ".paravirtprobe") == 0)) return 1; - /* Check for pattern 9 */ - if ((strcmp(tosec, ".init.text") == 0) && - (strcmp(fromsec, ".text") == 0)) - for (s = pat4sym; *s; s++) - if (strcmp(atsym, *s) == 0) - return 1; - /* Check for pattern 10 */ - if (strcmp(fromsec, ".machvec") == 0) + if ((strcmp(fromsec, ".machvec") == 0) || + (strcmp(fromsec, ".machine.desc") == 0)) return 1; return 0; @@ -884,30 +864,34 @@ static void warn_sec_mismatch(const char *modname, const char *fromsec, elf->strtab + before->st_name, refsymname)) return; + /* fromsec whitelist - without a valid 'before' + * powerpc has a GOT table in .got2 section */ + if (strcmp(fromsec, ".got2") == 0) + return; + if (before && after) { - warn("%s - Section mismatch: reference to %s:%s from %s " - "between '%s' (at offset 0x%llx) and '%s'\n", - modname, secname, refsymname, fromsec, + warn("%s(%s+0x%llx): Section mismatch: reference to %s:%s " + "(between '%s' and '%s')\n", + modname, fromsec, (unsigned long long)r.r_offset, + secname, refsymname, elf->strtab + before->st_name, - (long long)r.r_offset, elf->strtab + after->st_name); } else if (before) { - warn("%s - Section mismatch: reference to %s:%s from %s " - "after '%s' (at offset 0x%llx)\n", - modname, secname, refsymname, fromsec, - elf->strtab + before->st_name, - (long long)r.r_offset); + warn("%s(%s+0x%llx): Section mismatch: reference to %s:%s " + "(after '%s')\n", + modname, fromsec, (unsigned long long)r.r_offset, + secname, refsymname, + elf->strtab + before->st_name); } else if (after) { - warn("%s - Section mismatch: reference to %s:%s from %s " + warn("%s(%s+0x%llx): Section mismatch: reference to %s:%s " "before '%s' (at offset -0x%llx)\n", - modname, secname, refsymname, fromsec, - elf->strtab + after->st_name, - (long long)r.r_offset); + modname, fromsec, (unsigned long long)r.r_offset, + secname, refsymname, + elf->strtab + after->st_name); } else { - warn("%s - Section mismatch: reference to %s:%s from %s " - "(offset 0x%llx)\n", - modname, secname, fromsec, refsymname, - (long long)r.r_offset); + warn("%s(%s+0x%llx): Section mismatch: reference to %s:%s\n", + modname, fromsec, (unsigned long long)r.r_offset, + secname, refsymname); } } diff --git a/scripts/mod/sumversion.c b/scripts/mod/sumversion.c index 6873d5af80d584..d9cc6901d68082 100644 --- a/scripts/mod/sumversion.c +++ b/scripts/mod/sumversion.c @@ -7,6 +7,7 @@ #include <ctype.h> #include <errno.h> #include <string.h> +#include <limits.h> #include "modpost.h" /* diff --git a/scripts/package/buildtar b/scripts/package/buildtar index 88b5281ac41ef7..aa0ccdbd1f477b 100644 --- a/scripts/package/buildtar +++ b/scripts/package/buildtar @@ -69,8 +69,8 @@ cp -v -- "${objtree}/vmlinux" "${tmpdir}/boot/vmlinux-${KERNELRELEASE}" # Install arch-specific kernel image(s) # case "${ARCH}" in - i386) - [ -f "${objtree}/arch/i386/boot/bzImage" ] && cp -v -- "${objtree}/arch/i386/boot/bzImage" "${tmpdir}/boot/vmlinuz-${KERNELRELEASE}" + i386|x86_64) + [ -f "${objtree}/arch/$ARCH/boot/bzImage" ] && cp -v -- "${objtree}/arch/$ARCH/boot/bzImage" "${tmpdir}/boot/vmlinuz-${KERNELRELEASE}" ;; alpha) [ -f "${objtree}/arch/alpha/boot/vmlinux.gz" ] && cp -v -- "${objtree}/arch/alpha/boot/vmlinux.gz" "${tmpdir}/boot/vmlinuz-${KERNELRELEASE}" diff --git a/sound/isa/cmi8330.c b/sound/isa/cmi8330.c index 214d65d94c4538..f471f8ad68852d 100644 --- a/sound/isa/cmi8330.c +++ b/sound/isa/cmi8330.c @@ -109,6 +109,7 @@ module_param_array(wssdma, int, NULL, 0444); MODULE_PARM_DESC(wssdma, "DMA for CMI8330 WSS driver."); #ifdef CONFIG_PNP +static int isa_registered; static int pnp_registered; #endif @@ -686,14 +687,18 @@ static int __init alsa_card_cmi8330_init(void) int err; err = isa_register_driver(&snd_cmi8330_driver, SNDRV_CARDS); - if (err < 0) - return err; #ifdef CONFIG_PNP + if (!err) + isa_registered = 1; + err = pnp_register_card_driver(&cmi8330_pnpc_driver); if (!err) pnp_registered = 1; + + if (isa_registered) + err = 0; #endif - return 0; + return err; } static void __exit alsa_card_cmi8330_exit(void) @@ -701,8 +706,10 @@ static void __exit alsa_card_cmi8330_exit(void) #ifdef CONFIG_PNP if (pnp_registered) pnp_unregister_card_driver(&cmi8330_pnpc_driver); + + if (isa_registered) #endif - isa_unregister_driver(&snd_cmi8330_driver); + isa_unregister_driver(&snd_cmi8330_driver); } module_init(alsa_card_cmi8330_init) diff --git a/sound/isa/cs423x/cs4236.c b/sound/isa/cs423x/cs4236.c index 87f1392a2fa79f..1a14f33b6ab052 100644 --- a/sound/isa/cs423x/cs4236.c +++ b/sound/isa/cs423x/cs4236.c @@ -127,6 +127,7 @@ module_param_array(dma2, int, NULL, 0444); MODULE_PARM_DESC(dma2, "DMA2 # for " IDENT " driver."); #ifdef CONFIG_PNP +static int isa_registered; static int pnpc_registered; #ifdef CS4232 static int pnp_registered; @@ -770,9 +771,9 @@ static int __init alsa_card_cs423x_init(void) int err; err = isa_register_driver(&cs423x_isa_driver, SNDRV_CARDS); - if (err < 0) - return err; #ifdef CONFIG_PNP + if (!err) + isa_registered = 1; #ifdef CS4232 err = pnp_register_driver(&cs4232_pnp_driver); if (!err) @@ -781,8 +782,14 @@ static int __init alsa_card_cs423x_init(void) err = pnp_register_card_driver(&cs423x_pnpc_driver); if (!err) pnpc_registered = 1; -#endif /* CONFIG_PNP */ - return 0; +#ifdef CS4232 + if (pnp_registered) + err = 0; +#endif + if (isa_registered) + err = 0; +#endif + return err; } static void __exit alsa_card_cs423x_exit(void) @@ -794,8 +801,9 @@ static void __exit alsa_card_cs423x_exit(void) if (pnp_registered) pnp_unregister_driver(&cs4232_pnp_driver); #endif -#endif /* CONFIG_PNP */ - isa_unregister_driver(&cs423x_isa_driver); + if (isa_registered) +#endif + isa_unregister_driver(&cs423x_isa_driver); } module_init(alsa_card_cs423x_init) diff --git a/sound/isa/es18xx.c b/sound/isa/es18xx.c index d2a9c7df0ce510..f7732bf90be3a9 100644 --- a/sound/isa/es18xx.c +++ b/sound/isa/es18xx.c @@ -2036,7 +2036,9 @@ module_param_array(dma2, int, NULL, 0444); MODULE_PARM_DESC(dma2, "DMA 2 # for ES18xx driver."); #ifdef CONFIG_PNP -static int pnp_registered, pnpc_registered; +static int isa_registered; +static int pnp_registered; +static int pnpc_registered; static struct pnp_device_id snd_audiodrive_pnpbiosids[] = { { .id = "ESS1869" }, @@ -2466,18 +2468,22 @@ static int __init alsa_card_es18xx_init(void) int err; err = isa_register_driver(&snd_es18xx_isa_driver, SNDRV_CARDS); - if (err < 0) - return err; - #ifdef CONFIG_PNP + if (!err) + isa_registered = 1; + err = pnp_register_driver(&es18xx_pnp_driver); if (!err) pnp_registered = 1; + err = pnp_register_card_driver(&es18xx_pnpc_driver); if (!err) pnpc_registered = 1; + + if (isa_registered || pnp_registered) + err = 0; #endif - return 0; + return err; } static void __exit alsa_card_es18xx_exit(void) @@ -2487,8 +2493,9 @@ static void __exit alsa_card_es18xx_exit(void) pnp_unregister_card_driver(&es18xx_pnpc_driver); if (pnp_registered) pnp_unregister_driver(&es18xx_pnp_driver); + if (isa_registered) #endif - isa_unregister_driver(&snd_es18xx_isa_driver); + isa_unregister_driver(&snd_es18xx_isa_driver); } module_init(alsa_card_es18xx_init) diff --git a/sound/isa/gus/interwave.c b/sound/isa/gus/interwave.c index 3e46572555361d..0220cdbe1a2a38 100644 --- a/sound/isa/gus/interwave.c +++ b/sound/isa/gus/interwave.c @@ -135,6 +135,7 @@ struct snd_interwave { #ifdef CONFIG_PNP +static int isa_registered; static int pnp_registered; static struct pnp_card_device_id snd_interwave_pnpids[] = { @@ -934,15 +935,18 @@ static int __init alsa_card_interwave_init(void) int err; err = isa_register_driver(&snd_interwave_driver, SNDRV_CARDS); - if (err < 0) - return err; #ifdef CONFIG_PNP - /* ISA PnP cards */ + if (!err) + isa_registered = 1; + err = pnp_register_card_driver(&interwave_pnpc_driver); if (!err) pnp_registered = 1; + + if (isa_registered) + err = 0; #endif - return 0; + return err; } static void __exit alsa_card_interwave_exit(void) @@ -950,8 +954,9 @@ static void __exit alsa_card_interwave_exit(void) #ifdef CONFIG_PNP if (pnp_registered) pnp_unregister_card_driver(&interwave_pnpc_driver); + if (isa_registered) #endif - isa_unregister_driver(&snd_interwave_driver); + isa_unregister_driver(&snd_interwave_driver); } module_init(alsa_card_interwave_init) diff --git a/sound/isa/opl3sa2.c b/sound/isa/opl3sa2.c index 48743eb85fb64c..61a323cc0e49ad 100644 --- a/sound/isa/opl3sa2.c +++ b/sound/isa/opl3sa2.c @@ -92,6 +92,7 @@ module_param_array(opl3sa3_ymode, int, NULL, 0444); MODULE_PARM_DESC(opl3sa3_ymode, "Speaker size selection for 3D Enhancement mode: Desktop/Large Notebook/Small Notebook/HiFi."); #ifdef CONFIG_PNP +static int isa_registered; static int pnp_registered; static int pnpc_registered; #endif @@ -967,17 +968,22 @@ static int __init alsa_card_opl3sa2_init(void) int err; err = isa_register_driver(&snd_opl3sa2_isa_driver, SNDRV_CARDS); - if (err < 0) - return err; #ifdef CONFIG_PNP + if (!err) + isa_registered = 1; + err = pnp_register_driver(&opl3sa2_pnp_driver); if (!err) pnp_registered = 1; + err = pnp_register_card_driver(&opl3sa2_pnpc_driver); if (!err) pnpc_registered = 1; + + if (isa_registered || pnp_registered) + err = 0; #endif - return 0; + return err; } static void __exit alsa_card_opl3sa2_exit(void) @@ -987,8 +993,9 @@ static void __exit alsa_card_opl3sa2_exit(void) pnp_unregister_card_driver(&opl3sa2_pnpc_driver); if (pnp_registered) pnp_unregister_driver(&opl3sa2_pnp_driver); + if (isa_registered) #endif - isa_unregister_driver(&snd_opl3sa2_isa_driver); + isa_unregister_driver(&snd_opl3sa2_isa_driver); } module_init(alsa_card_opl3sa2_init) diff --git a/sound/isa/sb/sb16.c b/sound/isa/sb/sb16.c index 2a19b0a39eda1f..c4ba24bfd27c76 100644 --- a/sound/isa/sb/sb16.c +++ b/sound/isa/sb/sb16.c @@ -129,6 +129,7 @@ MODULE_PARM_DESC(seq_ports, "Number of sequencer ports for WaveTable synth."); #endif #ifdef CONFIG_PNP +static int isa_registered; static int pnp_registered; #endif @@ -702,15 +703,18 @@ static int __init alsa_card_sb16_init(void) int err; err = isa_register_driver(&snd_sb16_isa_driver, SNDRV_CARDS); - if (err < 0) - return err; #ifdef CONFIG_PNP - /* PnP cards at last */ + if (!err) + isa_registered = 1; + err = pnp_register_card_driver(&sb16_pnpc_driver); if (!err) pnp_registered = 1; + + if (isa_registered) + err = 0; #endif - return 0; + return err; } static void __exit alsa_card_sb16_exit(void) @@ -718,8 +722,9 @@ static void __exit alsa_card_sb16_exit(void) #ifdef CONFIG_PNP if (pnp_registered) pnp_unregister_card_driver(&sb16_pnpc_driver); + if (isa_registered) #endif - isa_unregister_driver(&snd_sb16_isa_driver); + isa_unregister_driver(&snd_sb16_isa_driver); } module_init(alsa_card_sb16_init) diff --git a/sound/isa/sscape.c b/sound/isa/sscape.c index 08c14978558ce2..9ea417bcf3e593 100644 --- a/sound/isa/sscape.c +++ b/sound/isa/sscape.c @@ -69,7 +69,9 @@ module_param_array(dma, int, NULL, 0444); MODULE_PARM_DESC(dma, "DMA # for SoundScape driver."); #ifdef CONFIG_PNP +static int isa_registered; static int pnp_registered; + static struct pnp_card_device_id sscape_pnpids[] = { { .id = "ENS3081", .devs = { { "ENS0000" } } }, { .id = "" } /* end */ @@ -1405,22 +1407,21 @@ static struct pnp_card_driver sscape_pnpc_driver = { static int __init sscape_init(void) { - int ret; + int err; - /* - * First check whether we were passed any parameters. - * These MUST take precedence over ANY automatic way - * of allocating cards, because the operator is - * S-P-E-L-L-I-N-G it out for us... - */ - ret = isa_register_driver(&snd_sscape_driver, SNDRV_CARDS); - if (ret < 0) - return ret; + err = isa_register_driver(&snd_sscape_driver, SNDRV_CARDS); #ifdef CONFIG_PNP - if (pnp_register_card_driver(&sscape_pnpc_driver) == 0) + if (!err) + isa_registered = 1; + + err = pnp_register_card_driver(&sscape_pnpc_driver); + if (!err) pnp_registered = 1; + + if (isa_registered) + err = 0; #endif - return 0; + return err; } static void __exit sscape_exit(void) @@ -1428,8 +1429,9 @@ static void __exit sscape_exit(void) #ifdef CONFIG_PNP if (pnp_registered) pnp_unregister_card_driver(&sscape_pnpc_driver); + if (isa_registered) #endif - isa_unregister_driver(&snd_sscape_driver); + isa_unregister_driver(&snd_sscape_driver); } module_init(sscape_init); diff --git a/sound/isa/wavefront/wavefront.c b/sound/isa/wavefront/wavefront.c index 75673f723857c3..83c2fc4cfc64fb 100644 --- a/sound/isa/wavefront/wavefront.c +++ b/sound/isa/wavefront/wavefront.c @@ -86,6 +86,7 @@ module_param_array(use_cs4232_midi, bool, NULL, 0444); MODULE_PARM_DESC(use_cs4232_midi, "Use CS4232 MPU-401 interface (inaccessibly located inside your computer)"); #ifdef CONFIG_PNP +static int isa_registered; static int pnp_registered; static struct pnp_card_device_id snd_wavefront_pnpids[] = { @@ -706,14 +707,18 @@ static int __init alsa_card_wavefront_init(void) int err; err = isa_register_driver(&snd_wavefront_driver, SNDRV_CARDS); - if (err < 0) - return err; #ifdef CONFIG_PNP + if (!err) + isa_registered = 1; + err = pnp_register_card_driver(&wavefront_pnpc_driver); if (!err) pnp_registered = 1; + + if (isa_registered) + err = 0; #endif - return 0; + return err; } static void __exit alsa_card_wavefront_exit(void) @@ -721,8 +726,9 @@ static void __exit alsa_card_wavefront_exit(void) #ifdef CONFIG_PNP if (pnp_registered) pnp_unregister_card_driver(&wavefront_pnpc_driver); + if (isa_registered) #endif - isa_unregister_driver(&snd_wavefront_driver); + isa_unregister_driver(&snd_wavefront_driver); } module_init(alsa_card_wavefront_init) diff --git a/sound/pci/ac97/ac97_patch.c b/sound/pci/ac97/ac97_patch.c index 3eac0f86266ce5..581ebba4d1a7e0 100644 --- a/sound/pci/ac97/ac97_patch.c +++ b/sound/pci/ac97/ac97_patch.c @@ -1782,6 +1782,11 @@ static unsigned int ad1981_jacks_blacklist[] = { 0x10140534, /* Thinkpad X31 */ 0x10140537, /* Thinkpad T41p */ 0x10140554, /* Thinkpad T42p/R50p */ + 0x10140567, /* Thinkpad T43p 2668-G7U */ + 0x10140581, /* Thinkpad X41-2527 */ + 0x104380b0, /* Asus A7V8X-MX */ + 0x11790241, /* Toshiba Satellite A-15 S127 */ + 0x144dc01a, /* Samsung NP-X20C004/SEG */ 0 /* end */ }; diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index 14649d54b49342..8e89d56b6400d2 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -707,7 +707,8 @@ static u32 query_amp_caps(struct hda_codec *codec, hda_nid_t nid, int direction) direction == HDA_OUTPUT ? AC_PAR_AMP_OUT_CAP : AC_PAR_AMP_IN_CAP); - info->status |= INFO_AMP_CAPS; + if (info->amp_caps) + info->status |= INFO_AMP_CAPS; } return info->amp_caps; } diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index a4ede27af021bd..34ac634695328c 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -93,6 +93,7 @@ enum { ALC262_HP_BPC_D7000_WL, ALC262_HP_BPC_D7000_WF, ALC262_BENQ_ED8, + ALC262_SONY_ASSAMD, ALC262_AUTO, ALC262_MODEL_LAST /* last tag */ }; @@ -118,6 +119,7 @@ enum { ALC861VD_3ST_DIG, ALC861VD_6ST_DIG, ALC861VD_LENOVO, + ALC861VD_DALLAS, ALC861VD_AUTO, ALC861VD_MODEL_LAST, }; @@ -139,8 +141,10 @@ enum { ALC882_6ST_DIG, ALC882_ARIMA, ALC882_W2JC, - ALC882_AUTO, + ALC882_TARGA, + ALC882_ASUS_A7J, ALC885_MACPRO, + ALC882_AUTO, ALC882_MODEL_LAST, }; @@ -152,11 +156,13 @@ enum { ALC883_6ST_DIG, ALC883_TARGA_DIG, ALC883_TARGA_2ch_DIG, - ALC888_DEMO_BOARD, ALC883_ACER, ALC883_MEDION, + ALC883_MEDION_MD2, ALC883_LAPTOP_EAPD, ALC883_LENOVO_101E_2ch, + ALC883_LENOVO_NB0763, + ALC888_LENOVO_MS7195_DIG, ALC883_AUTO, ALC883_MODEL_LAST, }; @@ -4753,6 +4759,35 @@ static int alc882_mux_enum_put(struct snd_kcontrol *kcontrol, } /* + * 2ch mode + */ +static struct hda_verb alc882_3ST_ch2_init[] = { + { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 }, + { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE }, + { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN }, + { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE }, + { } /* end */ +}; + +/* + * 6ch mode + */ +static struct hda_verb alc882_3ST_ch6_init[] = { + { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, + { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, + { 0x18, AC_VERB_SET_CONNECT_SEL, 0x02 }, + { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT }, + { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, + { 0x1a, AC_VERB_SET_CONNECT_SEL, 0x01 }, + { } /* end */ +}; + +static struct hda_channel_mode alc882_3ST_6ch_modes[2] = { + { 2, alc882_3ST_ch2_init }, + { 6, alc882_3ST_ch6_init }, +}; + +/* * 6ch mode */ static struct hda_verb alc882_sixstack_ch6_init[] = { @@ -4824,6 +4859,40 @@ static struct snd_kcontrol_new alc882_w2jc_mixer[] = { { } /* end */ }; +static struct snd_kcontrol_new alc882_targa_mixer[] = { + HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT), + HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT), + HDA_CODEC_MUTE("Headphone Playback Switch", 0x1b, 0x0, HDA_OUTPUT), + HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT), + HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT), + HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT), + HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT), + HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT), + HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT), + HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x1, HDA_INPUT), + HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x1, HDA_INPUT), + { } /* end */ +}; + +/* Pin assignment: Front=0x14, HP = 0x15, Front = 0x16, ??? + * Front Mic=0x18, Line In = 0x1a, Line In = 0x1b, CD = 0x1c + */ +static struct snd_kcontrol_new alc882_asus_a7j_mixer[] = { + HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT), + HDA_CODEC_MUTE("Front Playback Switch", 0x14, 0x0, HDA_OUTPUT), + HDA_CODEC_MUTE("Headphone Playback Switch", 0x15, 0x0, HDA_OUTPUT), + HDA_CODEC_MUTE("Mobile Front Playback Switch", 0x16, 0x0, HDA_OUTPUT), + HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT), + HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT), + HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT), + HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT), + HDA_CODEC_VOLUME("Mobile Line Playback Volume", 0x0b, 0x03, HDA_INPUT), + HDA_CODEC_MUTE("Mobile Line Playback Switch", 0x0b, 0x03, HDA_INPUT), + HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT), + HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT), + { } /* end */ +}; + static struct snd_kcontrol_new alc882_chmode_mixer[] = { { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, @@ -4985,6 +5054,66 @@ static struct hda_verb alc882_macpro_init_verbs[] = { { } }; +static struct hda_verb alc882_targa_verbs[] = { + {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, + {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, + + {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, + {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + + {0x18, AC_VERB_SET_CONNECT_SEL, 0x02}, /* mic/clfe */ + {0x1a, AC_VERB_SET_CONNECT_SEL, 0x01}, /* line/surround */ + {0x1b, AC_VERB_SET_CONNECT_SEL, 0x00}, /* HP */ + + {0x14, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN}, + {0x01, AC_VERB_SET_GPIO_MASK, 0x03}, + {0x01, AC_VERB_SET_GPIO_DIRECTION, 0x03}, + {0x01, AC_VERB_SET_GPIO_DATA, 0x03}, + { } /* end */ +}; + +/* toggle speaker-output according to the hp-jack state */ +static void alc882_targa_automute(struct hda_codec *codec) +{ + unsigned int present; + + present = snd_hda_codec_read(codec, 0x14, 0, + AC_VERB_GET_PIN_SENSE, 0) & 0x80000000; + snd_hda_codec_amp_update(codec, 0x1b, 0, HDA_OUTPUT, 0, + 0x80, present ? 0x80 : 0); + snd_hda_codec_amp_update(codec, 0x1b, 1, HDA_OUTPUT, 0, + 0x80, present ? 0x80 : 0); + snd_hda_codec_write(codec, 1, 0, AC_VERB_SET_GPIO_DATA, present ? 1 : 3); +} + +static void alc882_targa_unsol_event(struct hda_codec *codec, unsigned int res) +{ + /* Looks like the unsol event is incompatible with the standard + * definition. 4bit tag is placed at 26 bit! + */ + if (((res >> 26) == ALC880_HP_EVENT)) { + alc882_targa_automute(codec); + } +} + +static struct hda_verb alc882_asus_a7j_verbs[] = { + {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, + {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, + + {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, + {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + + {0x14, AC_VERB_SET_CONNECT_SEL, 0x00}, /* Front */ + {0x15, AC_VERB_SET_CONNECT_SEL, 0x00}, /* HP */ + {0x16, AC_VERB_SET_CONNECT_SEL, 0x00}, /* Front */ + + {0x18, AC_VERB_SET_CONNECT_SEL, 0x02}, /* mic/clfe */ + {0x1a, AC_VERB_SET_CONNECT_SEL, 0x01}, /* line/surround */ + {0x1b, AC_VERB_SET_CONNECT_SEL, 0x00}, /* HP */ + { } /* end */ +}; + static void alc882_gpio_mute(struct hda_codec *codec, int pin, int muted) { unsigned int gpiostate, gpiomask, gpiodir; @@ -5152,7 +5281,9 @@ static struct snd_pci_quirk alc882_cfg_tbl[] = { SND_PCI_QUIRK(0x1019, 0x6668, "ECS", ALC882_6ST_DIG), SND_PCI_QUIRK(0x105b, 0x6668, "Foxconn", ALC882_6ST_DIG), SND_PCI_QUIRK(0x1462, 0x6668, "MSI", ALC882_6ST_DIG), + SND_PCI_QUIRK(0x1462, 0x28fb, "Targa T8", ALC882_TARGA), /* MSI-1049 T8 */ SND_PCI_QUIRK(0x161f, 0x2054, "Arima W820", ALC882_ARIMA), + SND_PCI_QUIRK(0x1043, 0x060d, "Asus A7J", ALC882_ASUS_A7J), SND_PCI_QUIRK(0x1043, 0x81d8, "Asus P5WD", ALC882_6ST_DIG), SND_PCI_QUIRK(0x1043, 0x1971, "Asus W2JC", ALC882_W2JC), {} @@ -5214,6 +5345,36 @@ static struct alc_config_preset alc882_presets[] = { .channel_mode = alc882_ch_modes, .input_mux = &alc882_capture_source, }, + [ALC882_TARGA] = { + .mixers = { alc882_targa_mixer, alc882_chmode_mixer, + alc882_capture_mixer }, + .init_verbs = { alc882_init_verbs, alc882_targa_verbs}, + .num_dacs = ARRAY_SIZE(alc882_dac_nids), + .dac_nids = alc882_dac_nids, + .dig_out_nid = ALC882_DIGOUT_NID, + .num_adc_nids = ARRAY_SIZE(alc882_adc_nids), + .adc_nids = alc882_adc_nids, + .num_channel_mode = ARRAY_SIZE(alc882_3ST_6ch_modes), + .channel_mode = alc882_3ST_6ch_modes, + .need_dac_fix = 1, + .input_mux = &alc882_capture_source, + .unsol_event = alc882_targa_unsol_event, + .init_hook = alc882_targa_automute, + }, + [ALC882_ASUS_A7J] = { + .mixers = { alc882_asus_a7j_mixer, alc882_chmode_mixer, + alc882_capture_mixer }, + .init_verbs = { alc882_init_verbs, alc882_asus_a7j_verbs}, + .num_dacs = ARRAY_SIZE(alc882_dac_nids), + .dac_nids = alc882_dac_nids, + .dig_out_nid = ALC882_DIGOUT_NID, + .num_adc_nids = ARRAY_SIZE(alc882_adc_nids), + .adc_nids = alc882_adc_nids, + .num_channel_mode = ARRAY_SIZE(alc882_3ST_6ch_modes), + .channel_mode = alc882_3ST_6ch_modes, + .need_dac_fix = 1, + .input_mux = &alc882_capture_source, + }, }; @@ -5441,6 +5602,16 @@ static struct hda_input_mux alc883_lenovo_101e_capture_source = { }, }; +static struct hda_input_mux alc883_lenovo_nb0763_capture_source = { + .num_items = 4, + .items = { + { "Mic", 0x0 }, + { "iMic", 0x1 }, + { "Line", 0x2 }, + { "CD", 0x4 }, + }, +}; + #define alc883_mux_enum_info alc_mux_enum_info #define alc883_mux_enum_get alc_mux_enum_get @@ -5772,6 +5943,58 @@ static struct snd_kcontrol_new alc883_lenovo_101e_2ch_mixer[] = { { } /* end */ }; +static struct snd_kcontrol_new alc883_lenovo_nb0763_mixer[] = { + HDA_CODEC_VOLUME("Speaker Playback Volume", 0x0c, 0x0, HDA_OUTPUT), + HDA_BIND_MUTE("Speaker Playback Switch", 0x0c, 2, HDA_INPUT), + HDA_CODEC_MUTE("Headphone Playback Switch", 0x14, 0x0, HDA_OUTPUT), + HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT), + HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT), + HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT), + HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT), + HDA_CODEC_VOLUME("iMic Playback Volume", 0x0b, 0x1, HDA_INPUT), + HDA_CODEC_MUTE("iMic Playback Switch", 0x0b, 0x1, HDA_INPUT), + HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT), + HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT), + HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x09, 0x0, HDA_INPUT), + HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x09, 0x0, HDA_INPUT), + { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + /* .name = "Capture Source", */ + .name = "Input Source", + .count = 2, + .info = alc883_mux_enum_info, + .get = alc883_mux_enum_get, + .put = alc883_mux_enum_put, + }, + { } /* end */ +}; + +static struct snd_kcontrol_new alc883_medion_md2_mixer[] = { + HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT), + HDA_CODEC_MUTE("Headphone Playback Switch", 0x14, 0x0, HDA_OUTPUT), + HDA_CODEC_MUTE("Front Playback Switch", 0x15, 0x0, HDA_OUTPUT), + HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT), + HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT), + HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT), + HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT), + HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT), + HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT), + HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT), + HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT), + HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x09, 0x0, HDA_INPUT), + HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x09, 0x0, HDA_INPUT), + { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + /* .name = "Capture Source", */ + .name = "Input Source", + .count = 2, + .info = alc883_mux_enum_info, + .get = alc883_mux_enum_get, + .put = alc883_mux_enum_put, + }, + { } /* end */ +}; + static struct snd_kcontrol_new alc883_chmode_mixer[] = { { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, @@ -5886,6 +6109,93 @@ static struct hda_verb alc883_lenovo_101e_verbs[] = { { } /* end */ }; +static struct hda_verb alc883_lenovo_nb0763_verbs[] = { + {0x15, AC_VERB_SET_CONNECT_SEL, 0x00}, + {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, + {0x14, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN}, + {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, + { } /* end */ +}; + +static struct hda_verb alc888_lenovo_ms7195_verbs[] = { + {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, + {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, + {0x15, AC_VERB_SET_CONNECT_SEL, 0x00}, + {0x14, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_FRONT_EVENT | AC_USRSP_EN}, + {0x1b, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN}, + { } /* end */ +}; + +/* toggle front-jack and RCA according to the hp-jack state */ +static void alc888_lenovo_ms7195_front_automute(struct hda_codec *codec) +{ + unsigned int present; + + present = snd_hda_codec_read(codec, 0x1b, 0, + AC_VERB_GET_PIN_SENSE, 0) & 0x80000000; + snd_hda_codec_amp_update(codec, 0x14, 0, HDA_OUTPUT, 0, + 0x80, present ? 0x80 : 0); + snd_hda_codec_amp_update(codec, 0x14, 1, HDA_OUTPUT, 0, + 0x80, present ? 0x80 : 0); + snd_hda_codec_amp_update(codec, 0x15, 0, HDA_OUTPUT, 0, + 0x80, present ? 0x80 : 0); + snd_hda_codec_amp_update(codec, 0x15, 1, HDA_OUTPUT, 0, + 0x80, present ? 0x80 : 0); + +} + +/* toggle RCA according to the front-jack state */ +static void alc888_lenovo_ms7195_rca_automute(struct hda_codec *codec) +{ + unsigned int present; + + present = snd_hda_codec_read(codec, 0x14, 0, + AC_VERB_GET_PIN_SENSE, 0) & 0x80000000; + snd_hda_codec_amp_update(codec, 0x15, 0, HDA_OUTPUT, 0, + 0x80, present ? 0x80 : 0); + snd_hda_codec_amp_update(codec, 0x15, 1, HDA_OUTPUT, 0, + 0x80, present ? 0x80 : 0); + +} +static void alc883_lenovo_ms7195_unsol_event(struct hda_codec *codec, + unsigned int res) +{ + if ((res >> 26) == ALC880_HP_EVENT) + alc888_lenovo_ms7195_front_automute(codec); + if ((res >> 26) == ALC880_FRONT_EVENT) + alc888_lenovo_ms7195_rca_automute(codec); +} + +static struct hda_verb alc883_medion_md2_verbs[] = { + {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, + {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, + + {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, + + {0x14, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN}, + { } /* end */ +}; + +/* toggle speaker-output according to the hp-jack state */ +static void alc883_medion_md2_automute(struct hda_codec *codec) +{ + unsigned int present; + + present = snd_hda_codec_read(codec, 0x14, 0, + AC_VERB_GET_PIN_SENSE, 0) & 0x80000000; + snd_hda_codec_amp_update(codec, 0x15, 0, HDA_OUTPUT, 0, + 0x80, present ? 0x80 : 0); + snd_hda_codec_amp_update(codec, 0x15, 1, HDA_OUTPUT, 0, + 0x80, present ? 0x80 : 0); +} + +static void alc883_medion_md2_unsol_event(struct hda_codec *codec, + unsigned int res) +{ + if ((res >> 26) == ALC880_HP_EVENT) + alc883_medion_md2_automute(codec); +} + /* toggle speaker-output according to the hp-jack state */ static void alc883_tagra_automute(struct hda_codec *codec) { @@ -6051,11 +6361,13 @@ static const char *alc883_models[ALC883_MODEL_LAST] = { [ALC883_6ST_DIG] = "6stack-dig", [ALC883_TARGA_DIG] = "targa-dig", [ALC883_TARGA_2ch_DIG] = "targa-2ch-dig", - [ALC888_DEMO_BOARD] = "6stack-dig-demo", [ALC883_ACER] = "acer", [ALC883_MEDION] = "medion", + [ALC883_MEDION_MD2] = "medion-md2", [ALC883_LAPTOP_EAPD] = "laptop-eapd", [ALC883_LENOVO_101E_2ch] = "lenovo-101e", + [ALC883_LENOVO_NB0763] = "lenovo-nb0763", + [ALC888_LENOVO_MS7195_DIG] = "lenovo-ms7195-dig", [ALC883_AUTO] = "auto", }; @@ -6082,7 +6394,10 @@ static struct snd_pci_quirk alc883_cfg_tbl[] = { SND_PCI_QUIRK(0x161f, 0x2054, "Medion laptop", ALC883_MEDION), SND_PCI_QUIRK(0x1071, 0x8258, "Evesham Voyaeger", ALC883_LAPTOP_EAPD), SND_PCI_QUIRK(0x8086, 0xd601, "D102GGC", ALC883_3ST_6ch), - SND_PCI_QUIRK(0x17aa, 0x101e, "lenovo 101e", ALC883_LENOVO_101E_2ch), + SND_PCI_QUIRK(0x17aa, 0x101e, "Lenovo 101e", ALC883_LENOVO_101E_2ch), + SND_PCI_QUIRK(0x17aa, 0x3bfd, "Lenovo NB0763", ALC883_LENOVO_NB0763), + SND_PCI_QUIRK(0x17aa, 0x2085, "Lenovo NB0763", ALC883_LENOVO_NB0763), + SND_PCI_QUIRK(0x17c0, 0x4071, "MEDION MD2", ALC883_MEDION_MD2), {} }; @@ -6168,19 +6483,6 @@ static struct alc_config_preset alc883_presets[] = { .unsol_event = alc883_tagra_unsol_event, .init_hook = alc883_tagra_automute, }, - [ALC888_DEMO_BOARD] = { - .mixers = { alc883_base_mixer, alc883_chmode_mixer }, - .init_verbs = { alc883_init_verbs }, - .num_dacs = ARRAY_SIZE(alc883_dac_nids), - .dac_nids = alc883_dac_nids, - .dig_out_nid = ALC883_DIGOUT_NID, - .num_adc_nids = ARRAY_SIZE(alc883_adc_nids), - .adc_nids = alc883_adc_nids, - .dig_in_nid = ALC883_DIGIN_NID, - .num_channel_mode = ARRAY_SIZE(alc883_sixstack_modes), - .channel_mode = alc883_sixstack_modes, - .input_mux = &alc883_capture_source, - }, [ALC883_ACER] = { .mixers = { alc883_base_mixer, alc883_chmode_mixer }, @@ -6211,6 +6513,20 @@ static struct alc_config_preset alc883_presets[] = { .channel_mode = alc883_sixstack_modes, .input_mux = &alc883_capture_source, }, + [ALC883_MEDION_MD2] = { + .mixers = { alc883_medion_md2_mixer}, + .init_verbs = { alc883_init_verbs, alc883_medion_md2_verbs}, + .num_dacs = ARRAY_SIZE(alc883_dac_nids), + .dac_nids = alc883_dac_nids, + .dig_out_nid = ALC883_DIGOUT_NID, + .num_adc_nids = ARRAY_SIZE(alc883_adc_nids), + .adc_nids = alc883_adc_nids, + .num_channel_mode = ARRAY_SIZE(alc883_3ST_2ch_modes), + .channel_mode = alc883_3ST_2ch_modes, + .input_mux = &alc883_capture_source, + .unsol_event = alc883_medion_md2_unsol_event, + .init_hook = alc883_medion_md2_automute, + }, [ALC883_LAPTOP_EAPD] = { .mixers = { alc883_base_mixer, alc883_chmode_mixer }, @@ -6236,6 +6552,35 @@ static struct alc_config_preset alc883_presets[] = { .unsol_event = alc883_lenovo_101e_unsol_event, .init_hook = alc883_lenovo_101e_all_automute, }, + [ALC883_LENOVO_NB0763] = { + .mixers = { alc883_lenovo_nb0763_mixer }, + .init_verbs = { alc883_init_verbs, alc883_lenovo_nb0763_verbs}, + .num_dacs = ARRAY_SIZE(alc883_dac_nids), + .dac_nids = alc883_dac_nids, + .num_adc_nids = ARRAY_SIZE(alc883_adc_nids), + .adc_nids = alc883_adc_nids, + .num_channel_mode = ARRAY_SIZE(alc883_3ST_2ch_modes), + .channel_mode = alc883_3ST_2ch_modes, + .need_dac_fix = 1, + .input_mux = &alc883_lenovo_nb0763_capture_source, + .unsol_event = alc883_medion_md2_unsol_event, + .init_hook = alc883_medion_md2_automute, + }, + [ALC888_LENOVO_MS7195_DIG] = { + .mixers = { alc883_3ST_6ch_mixer, alc883_chmode_mixer }, + .init_verbs = { alc883_init_verbs, alc888_lenovo_ms7195_verbs}, + .num_dacs = ARRAY_SIZE(alc883_dac_nids), + .dac_nids = alc883_dac_nids, + .dig_out_nid = ALC883_DIGOUT_NID, + .num_adc_nids = ARRAY_SIZE(alc883_adc_nids), + .adc_nids = alc883_adc_nids, + .num_channel_mode = ARRAY_SIZE(alc883_3ST_6ch_modes), + .channel_mode = alc883_3ST_6ch_modes, + .need_dac_fix = 1, + .input_mux = &alc883_capture_source, + .unsol_event = alc883_lenovo_ms7195_unsol_event, + .init_hook = alc888_lenovo_ms7195_front_automute, + }, }; @@ -6499,6 +6844,18 @@ static struct snd_kcontrol_new alc262_HP_BPC_WildWest_option_mixer[] = { { } /* end */ }; +static struct snd_kcontrol_new alc262_sony_mixer[] = { + HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT), + HDA_CODEC_MUTE("Front Playback Switch", 0x15, 0x0, HDA_OUTPUT), + HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT), + HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT), + HDA_CODEC_VOLUME("ATAPI Mic Playback Volume", 0x0b, 0x01, HDA_INPUT), + HDA_CODEC_MUTE("ATAPI Mic Playback Switch", 0x0b, 0x01, HDA_INPUT), + { } /* end */ +}; + + + #define alc262_capture_mixer alc882_capture_mixer #define alc262_capture_alt_mixer alc882_capture_alt_mixer @@ -6597,6 +6954,15 @@ static struct hda_verb alc262_hippo1_unsol_verbs[] = { {} }; +static struct hda_verb alc262_sony_unsol_verbs[] = { + {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0}, + {0x15, AC_VERB_SET_CONNECT_SEL, 0x00}, + {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24}, // Front Mic + + {0x15, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_HP_EVENT}, + {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, +}; + /* mute/unmute internal speaker according to the hp jack and mute state */ static void alc262_hippo_automute(struct hda_codec *codec, int force) { @@ -7215,6 +7581,7 @@ static const char *alc262_models[ALC262_MODEL_LAST] = { [ALC262_HP_BPC] = "hp-bpc", [ALC262_HP_BPC_D7000_WL]= "hp-bpc-d7000", [ALC262_BENQ_ED8] = "benq", + [ALC262_BENQ_ED8] = "sony-assamd", [ALC262_AUTO] = "auto", }; @@ -7236,6 +7603,9 @@ static struct snd_pci_quirk alc262_cfg_tbl[] = { SND_PCI_QUIRK(0x10cf, 0x1397, "Fujitsu", ALC262_FUJITSU), SND_PCI_QUIRK(0x17ff, 0x058f, "Benq Hippo", ALC262_HIPPO_1), SND_PCI_QUIRK(0x17ff, 0x0560, "Benq ED8", ALC262_BENQ_ED8), + SND_PCI_QUIRK(0x104d, 0x9015, "Sony 0x9015", ALC262_SONY_ASSAMD), + SND_PCI_QUIRK(0x104d, 0x900e, "Sony ASSAMD", ALC262_SONY_ASSAMD), + SND_PCI_QUIRK(0x104d, 0x1f00, "Sony ASSAMD", ALC262_SONY_ASSAMD), {} }; @@ -7327,6 +7697,17 @@ static struct alc_config_preset alc262_presets[] = { .channel_mode = alc262_modes, .input_mux = &alc262_capture_source, }, + [ALC262_SONY_ASSAMD] = { + .mixers = { alc262_sony_mixer }, + .init_verbs = { alc262_init_verbs, alc262_sony_unsol_verbs}, + .num_dacs = ARRAY_SIZE(alc262_dac_nids), + .dac_nids = alc262_dac_nids, + .hp_nid = 0x02, + .num_channel_mode = ARRAY_SIZE(alc262_modes), + .channel_mode = alc262_modes, + .input_mux = &alc262_capture_source, + .unsol_event = alc262_hippo_unsol_event, + }, }; static int patch_alc262(struct hda_codec *codec) @@ -8599,6 +8980,15 @@ static struct hda_input_mux alc861vd_capture_source = { }, }; +static struct hda_input_mux alc861vd_dallas_capture_source = { + .num_items = 3, + .items = { + { "Front Mic", 0x0 }, + { "ATAPI Mic", 0x1 }, + { "Line In", 0x5 }, + }, +}; + #define alc861vd_mux_enum_info alc_mux_enum_info #define alc861vd_mux_enum_get alc_mux_enum_get @@ -8782,6 +9172,34 @@ static struct snd_kcontrol_new alc861vd_lenovo_mixer[] = { { } /* end */ }; +/* Pin assignment: Front=0x14, HP = 0x15, + * Front Mic=0x18, ATAPI Mic = 0x19, Line In = 0x1d + */ +static struct snd_kcontrol_new alc861vd_dallas_mixer[] = { + HDA_CODEC_VOLUME("Front Playback Volume", 0x02, 0x0, HDA_OUTPUT), + HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT), + HDA_CODEC_VOLUME("Headphone Playback Volume", 0x03, 0x0, HDA_OUTPUT), + HDA_BIND_MUTE("Headphone Playback Switch", 0x0d, 2, HDA_INPUT), + HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x0, HDA_INPUT), + HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x0, HDA_INPUT), + HDA_CODEC_VOLUME("ATAPI Mic Playback Volume", 0x0b, 0x1, HDA_INPUT), + HDA_CODEC_MUTE("ATAPI Mic Playback Switch", 0x0b, 0x1, HDA_INPUT), + HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x05, HDA_INPUT), + HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x05, HDA_INPUT), + HDA_CODEC_VOLUME("Capture Volume", 0x09, 0x0, HDA_INPUT), + HDA_CODEC_MUTE("Capture Switch", 0x09, 0x0, HDA_INPUT), + { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + /* .name = "Capture Source", */ + .name = "Input Source", + .count = 1, + .info = alc882_mux_enum_info, + .get = alc882_mux_enum_get, + .put = alc882_mux_enum_put, + }, + { } /* end */ +}; + /* * generic initialization of ADC, input mixers and output mixers */ @@ -8969,6 +9387,70 @@ static void alc861vd_lenovo_unsol_event(struct hda_codec *codec, } } +static struct hda_verb alc861vd_dallas_verbs[] = { + {0x02, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, + {0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, + {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, + {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, + + {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, + {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, + {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, + {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, + {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, + + {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + {0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + + {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF50}, + {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, + {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF50}, + {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, + {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, + {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, + {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, + {0x1d, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, + + {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, + {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, + {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, + {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, + + {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x09, AC_VERB_SET_CONNECT_SEL, 0x00}, + {0x15, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_HP_EVENT}, + + { } /* end */ +}; + +/* toggle speaker-output according to the hp-jack state */ +static void alc861vd_dallas_automute(struct hda_codec *codec) +{ + unsigned int present; + + present = snd_hda_codec_read(codec, 0x15, 0, + AC_VERB_GET_PIN_SENSE, 0) & 0x80000000; + snd_hda_codec_amp_update(codec, 0x14, 0, HDA_OUTPUT, 0, + 0x80, present ? 0x80 : 0); + snd_hda_codec_amp_update(codec, 0x14, 1, HDA_OUTPUT, 0, + 0x80, present ? 0x80 : 0); +} + +static void alc861vd_dallas_unsol_event(struct hda_codec *codec, unsigned int res) +{ + if ((res >> 26) == ALC880_HP_EVENT) + alc861vd_dallas_automute(codec); +} + /* pcm configuration: identiacal with ALC880 */ #define alc861vd_pcm_analog_playback alc880_pcm_analog_playback #define alc861vd_pcm_analog_capture alc880_pcm_analog_capture @@ -8984,6 +9466,7 @@ static const char *alc861vd_models[ALC861VD_MODEL_LAST] = { [ALC861VD_3ST_DIG] = "3stack-digout", [ALC861VD_6ST_DIG] = "6stack-digout", [ALC861VD_LENOVO] = "lenovo", + [ALC861VD_DALLAS] = "dallas", [ALC861VD_AUTO] = "auto", }; @@ -8993,6 +9476,8 @@ static struct snd_pci_quirk alc861vd_cfg_tbl[] = { SND_PCI_QUIRK(0x10de, 0x03f0, "Realtek ALC660 demo", ALC660VD_3ST), SND_PCI_QUIRK(0x1019, 0xa88d, "Realtek ALC660 demo", ALC660VD_3ST), + SND_PCI_QUIRK(0x1179, 0xff00, "DALLAS", ALC861VD_DALLAS), + SND_PCI_QUIRK(0x1179, 0xff01, "DALLAS", ALC861VD_DALLAS), SND_PCI_QUIRK(0x17aa, 0x3802, "Lenovo 3000 C200", ALC861VD_LENOVO), SND_PCI_QUIRK(0x17aa, 0x2066, "Lenovo", ALC861VD_LENOVO), {} @@ -9059,6 +9544,19 @@ static struct alc_config_preset alc861vd_presets[] = { .unsol_event = alc861vd_lenovo_unsol_event, .init_hook = alc861vd_lenovo_automute, }, + [ALC861VD_DALLAS] = { + .mixers = { alc861vd_dallas_mixer }, + .init_verbs = { alc861vd_dallas_verbs }, + .num_dacs = ARRAY_SIZE(alc861vd_dac_nids), + .dac_nids = alc861vd_dac_nids, + .num_adc_nids = ARRAY_SIZE(alc861vd_adc_nids), + .adc_nids = alc861vd_adc_nids, + .num_channel_mode = ARRAY_SIZE(alc861vd_3stack_2ch_modes), + .channel_mode = alc861vd_3stack_2ch_modes, + .input_mux = &alc861vd_dallas_capture_source, + .unsol_event = alc861vd_dallas_unsol_event, + .init_hook = alc861vd_dallas_automute, + }, }; /* diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 93ae9c2507677c..a6a0a80edc3b19 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -467,6 +467,8 @@ static struct snd_pci_quirk stac9200_cfg_tbl[] = { "Dell XPS M1710", STAC_REF), SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x01cf, "Dell Precision M90", STAC_REF), + SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x01d6, + "unknown Dell", STAC_REF), {} /* terminator */ }; diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c index 202f720b34b9b4..da9734073dba54 100644 --- a/sound/pci/intel8x0.c +++ b/sound/pci/intel8x0.c @@ -1799,6 +1799,18 @@ static struct ac97_quirk ac97_quirks[] __devinitdata = { }, { .subvendor = 0x1028, + .subdevice = 0x0186, + .name = "Dell Latitude D810", /* cf. Malone #41015 */ + .type = AC97_TUNE_HP_MUTE_LED + }, + { + .subvendor = 0x1028, + .subdevice = 0x0188, + .name = "Dell Inspiron 6000", + .type = AC97_TUNE_HP_MUTE_LED /* cf. Malone #41015 */ + }, + { + .subvendor = 0x1028, .subdevice = 0x0191, .name = "Dell Inspiron 8600", .type = AC97_TUNE_HP_ONLY @@ -1819,7 +1831,7 @@ static struct ac97_quirk ac97_quirks[] __devinitdata = { .subvendor = 0x103c, .subdevice = 0x088c, .name = "HP nc8000", - .type = AC97_TUNE_MUTE_LED + .type = AC97_TUNE_HP_MUTE_LED }, { .subvendor = 0x103c, @@ -1913,6 +1925,12 @@ static struct ac97_quirk ac97_quirks[] __devinitdata = { }, { .subvendor = 0x10cf, + .subdevice = 0x127e, + .name = "Fujitsu Lifebook C1211D", + .type = AC97_TUNE_HP_ONLY + }, + { + .subvendor = 0x10cf, .subdevice = 0x12ec, .name = "Fujitsu-Siemens 4010", .type = AC97_TUNE_HP_ONLY diff --git a/sound/soc/codecs/ac97.c b/sound/soc/codecs/ac97.c index 0cdef971cbd395..0b8a6f8b3668a5 100644 --- a/sound/soc/codecs/ac97.c +++ b/sound/soc/codecs/ac97.c @@ -43,8 +43,9 @@ static int ac97_prepare(struct snd_pcm_substream *substream) #define STD_AC97_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\ SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000) -static struct snd_soc_codec_dai ac97_dai = { +struct snd_soc_codec_dai ac97_dai = { .name = "AC97 HiFi", + .type = SND_SOC_DAI_AC97, .playback = { .stream_name = "AC97 Playback", .channels_min = 1, diff --git a/sound/soc/codecs/wm9712.c b/sound/soc/codecs/wm9712.c index 264413a00cac53..986b5d59cefacc 100644 --- a/sound/soc/codecs/wm9712.c +++ b/sound/soc/codecs/wm9712.c @@ -544,6 +544,7 @@ static int ac97_aux_prepare(struct snd_pcm_substream *substream) struct snd_soc_codec_dai wm9712_dai[] = { { .name = "AC97 HiFi", + .type = SND_SOC_DAI_AC97_BUS, .playback = { .stream_name = "HiFi Playback", .channels_min = 1, diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 36519aef55d932..92d5d917b73bc6 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -116,6 +116,7 @@ static int soc_ac97_dev_register(struct snd_soc_codec *codec) static inline const char* get_dai_name(int type) { switch(type) { + case SND_SOC_DAI_AC97_BUS: case SND_SOC_DAI_AC97: return "AC97"; case SND_SOC_DAI_I2S: @@ -1099,7 +1100,8 @@ int snd_soc_register_card(struct snd_soc_device *socdev) continue; } } - if (socdev->machine->dai_link[i].cpu_dai->type == SND_SOC_DAI_AC97) + if (socdev->machine->dai_link[i].codec_dai->type == + SND_SOC_DAI_AC97_BUS) ac97 = 1; } snprintf(codec->card->shortname, sizeof(codec->card->shortname), @@ -1148,11 +1150,21 @@ EXPORT_SYMBOL_GPL(snd_soc_register_card); void snd_soc_free_pcms(struct snd_soc_device *socdev) { struct snd_soc_codec *codec = socdev->codec; +#ifdef CONFIG_SND_SOC_AC97_BUS + struct snd_soc_codec_dai *codec_dai; + int i; +#endif mutex_lock(&codec->mutex); #ifdef CONFIG_SND_SOC_AC97_BUS - if (codec->ac97) - soc_ac97_dev_unregister(codec); + for(i = 0; i < codec->num_dai; i++) { + codec_dai = &codec->dai[i]; + if (codec_dai->type == SND_SOC_DAI_AC97_BUS && codec->ac97) { + soc_ac97_dev_unregister(codec); + goto free_card; + } + } +free_card: #endif if (codec->card) diff --git a/sound/sound_firmware.c b/sound/sound_firmware.c index 3304344713ae11..96deaefaa89756 100644 --- a/sound/sound_firmware.c +++ b/sound/sound_firmware.c @@ -3,6 +3,7 @@ #include <linux/fs.h> #include <linux/mm.h> #include <linux/slab.h> +#include <linux/sched.h> #include <asm/uaccess.h> #include "oss/sound_firmware.h" diff --git a/sound/usb/usbmixer.c b/sound/usb/usbmixer.c index 7b3bf3545a3bd8..325d4b6b54aafd 100644 --- a/sound/usb/usbmixer.c +++ b/sound/usb/usbmixer.c @@ -360,7 +360,7 @@ static int get_ctl_value(struct usb_mixer_elem_info *cval, int request, int vali request, USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN, validx, cval->mixer->ctrlif | (cval->id << 8), - buf, val_len, 100) >= 0) { + buf, val_len, 100) >= val_len) { *value_ret = convert_signed_value(cval, snd_usb_combine_bytes(buf, val_len)); return 0; } diff --git a/sound/usb/usbquirks.h b/sound/usb/usbquirks.h index 8fcbe93b258927..374fbf657a2de3 100644 --- a/sound/usb/usbquirks.h +++ b/sound/usb/usbquirks.h @@ -48,6 +48,15 @@ USB_DEVICE_ID_MATCH_INT_CLASS | USB_DEVICE_ID_MATCH_INT_SUBCLASS, .idVendor = 0x046d, + .idProduct = 0x0850, + .bInterfaceClass = USB_CLASS_AUDIO, + .bInterfaceSubClass = USB_SUBCLASS_AUDIO_CONTROL +}, +{ + .match_flags = USB_DEVICE_ID_MATCH_DEVICE | + USB_DEVICE_ID_MATCH_INT_CLASS | + USB_DEVICE_ID_MATCH_INT_SUBCLASS, + .idVendor = 0x046d, .idProduct = 0x08f0, .bInterfaceClass = USB_CLASS_AUDIO, .bInterfaceSubClass = USB_SUBCLASS_AUDIO_CONTROL |