aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--drivers/hwmon/adm1026.c2
-rw-r--r--drivers/hwmon/max1619.c2
-rw-r--r--drivers/hwmon/pc87360.c2
-rw-r--r--drivers/i2c/busses/i2c-i801.c6
4 files changed, 6 insertions, 6 deletions
diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c
index 3c85fe150cd754..4fa17c76eea224 100644
--- a/drivers/hwmon/adm1026.c
+++ b/drivers/hwmon/adm1026.c
@@ -393,7 +393,7 @@ void adm1026_init_client(struct i2c_client *client)
value = data->config3;
if (data->config3 & CFG3_GPIO16_ENABLE) {
- dev_dbg(&client->dev, "GPIO16 enabled. THERM"
+ dev_dbg(&client->dev, "GPIO16 enabled. THERM "
"pin disabled.\n");
} else {
dev_dbg(&client->dev, "THERM pin enabled. "
diff --git a/drivers/hwmon/max1619.c b/drivers/hwmon/max1619.c
index bf553dcd97d68f..3c159f1d49ee3e 100644
--- a/drivers/hwmon/max1619.c
+++ b/drivers/hwmon/max1619.c
@@ -363,7 +363,7 @@ static void __exit sensors_max1619_exit(void)
i2c_del_driver(&max1619_driver);
}
-MODULE_AUTHOR("Alexey Fisher <fishor@mail.ru> and"
+MODULE_AUTHOR("Alexey Fisher <fishor@mail.ru> and "
"Jean Delvare <khali@linux-fr.org>");
MODULE_DESCRIPTION("MAX1619 sensor driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/pc87360.c b/drivers/hwmon/pc87360.c
index 876c68f3af31e4..fa4032d53b790b 100644
--- a/drivers/hwmon/pc87360.c
+++ b/drivers/hwmon/pc87360.c
@@ -1043,7 +1043,7 @@ static void pc87360_init_client(struct i2c_client *client, int use_thermistors)
if (init >= 2 && data->innr) {
reg = pc87360_read_value(data, LD_IN, NO_BANK,
PC87365_REG_IN_CONVRATE);
- dev_info(&client->dev, "VLM conversion set to"
+ dev_info(&client->dev, "VLM conversion set to "
"1s period, 160us delay\n");
pc87360_write_value(data, LD_IN, NO_BANK,
PC87365_REG_IN_CONVRATE,
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 0ab7e37f5b0028..1ab41313ce5186 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -137,7 +137,7 @@ static int i801_setup(struct pci_dev *dev)
pci_read_config_word(I801_dev, SMBBA, &i801_smba);
i801_smba &= 0xfff0;
if(i801_smba == 0) {
- dev_err(&dev->dev, "SMB base address uninitialized"
+ dev_err(&dev->dev, "SMB base address uninitialized "
"- upgrade BIOS or use force_addr=0xaddr\n");
return -ENODEV;
}
@@ -186,7 +186,7 @@ static int i801_transaction(void)
int result = 0;
int timeout = 0;
- dev_dbg(&I801_dev->dev, "Transaction (pre): CNT=%02x, CMD=%02x,"
+ dev_dbg(&I801_dev->dev, "Transaction (pre): CNT=%02x, CMD=%02x, "
"ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT),
inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0),
inb_p(SMBHSTDAT1));
@@ -240,7 +240,7 @@ static int i801_transaction(void)
outb_p(inb(SMBHSTSTS), SMBHSTSTS);
if ((temp = (0x1f & inb_p(SMBHSTSTS))) != 0x00) {
- dev_dbg(&I801_dev->dev, "Failed reset at end of transaction"
+ dev_dbg(&I801_dev->dev, "Failed reset at end of transaction "
"(%02x)\n", temp);
}
dev_dbg(&I801_dev->dev, "Transaction (post): CNT=%02x, CMD=%02x, "