timers: Implement the hierarchical pull model

Placing timers at enqueue time on a target CPU based on dubious heuristics
does not make any sense:

 1) Most timer wheel timers are canceled or rearmed before they expire.

 2) The heuristics to predict which CPU will be busy when the timer expires
    are wrong by definition.

So placing the timers at enqueue wastes precious cycles.

The proper solution to this problem is to always queue the timers on the
local CPU and allow the non pinned timers to be pulled onto a busy CPU at
expiry time.

Therefore split the timer storage into local pinned and global timers:
Local pinned timers are always expired on the CPU on which they have been
queued. Global timers can be expired on any CPU.

As long as a CPU is busy it expires both local and global timers. When a
CPU goes idle it arms for the first expiring local timer. If the first
expiring pinned (local) timer is before the first expiring movable timer,
then no action is required because the CPU will wake up before the first
movable timer expires. If the first expiring movable timer is before the
first expiring pinned (local) timer, then this timer is queued into an idle
timerqueue and eventually expired by another active CPU.

To avoid global locking the timerqueues are implemented as a hierarchy. The
lowest level of the hierarchy holds the CPUs. The CPUs are associated to
groups of 8, which are separated per node. If more than one CPU group
exist, then a second level in the hierarchy collects the groups. Depending
on the size of the system more than 2 levels are required. Each group has a
"migrator" which checks the timerqueue during the tick for remote expirable
timers.

If the last CPU in a group goes idle it reports the first expiring event in
the group up to the next group(s) in the hierarchy. If the last CPU goes
idle it arms its timer for the first system wide expiring timer to ensure
that no timer event is missed.

Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20240222103710.32582-1-anna-maria@linutronix.de

1 files changed, 140 insertions, 0 deletions

diff --git a/kernel/time/timer_migration.h b/kernel/time/timer_migration.h
new file mode 100644
index 00000000000000..6c37d94a37d90a
--- /dev/null
+++ b/kernel/time/timer_migration.h
@@ -0,0 +1,140 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef _KERNEL_TIME_MIGRATION_H
+#define _KERNEL_TIME_MIGRATION_H
+
+/* Per group capacity. Must be a power of 2! */
+#define TMIGR_CHILDREN_PER_GROUP 8
+
+/**
+ * struct tmigr_event - a timer event associated to a CPU
+ * @nextevt:	The node to enqueue an event in the parent group queue
+ * @cpu:	The CPU to which this event belongs
+ * @ignore:	Hint whether the event could be ignored; it is set when
+ *		CPU or group is active;
+ */
+struct tmigr_event {
+	struct timerqueue_node	nextevt;
+	unsigned int		cpu;
+	bool			ignore;
+};
+
+/**
+ * struct tmigr_group - timer migration hierarchy group
+ * @lock:		Lock protecting the event information and group hierarchy
+ *			information during setup
+ * @parent:		Pointer to the parent group
+ * @groupevt:		Next event of the group which is only used when the
+ *			group is !active. The group event is then queued into
+ *			the parent timer queue.
+ *			Ignore bit of @groupevt is set when the group is active.
+ * @next_expiry:	Base monotonic expiry time of the next event of the
+ *			group; It is used for the racy lockless check whether a
+ *			remote expiry is required; it is always reliable
+ * @events:		Timer queue for child events queued in the group
+ * @migr_state:		State of the group (see union tmigr_state)
+ * @level:		Hierarchy level of the group; Required during setup
+ * @numa_node:		Required for setup only to make sure CPU and low level
+ *			group information is NUMA local. It is set to NUMA node
+ *			as long as the group level is per NUMA node (level <
+ *			tmigr_crossnode_level); otherwise it is set to
+ *			NUMA_NO_NODE
+ * @num_children:	Counter of group children to make sure the group is only
+ *			filled with TMIGR_CHILDREN_PER_GROUP; Required for setup
+ *			only
+ * @childmask:		childmask of the group in the parent group; is set
+ *			during setup and will never change; can be read
+ *			lockless
+ * @list:		List head that is added to the per level
+ *			tmigr_level_list; is required during setup when a
+ *			new group needs to be connected to the existing
+ *			hierarchy groups
+ */
+struct tmigr_group {
+	raw_spinlock_t		lock;
+	struct tmigr_group	*parent;
+	struct tmigr_event	groupevt;
+	u64			next_expiry;
+	struct timerqueue_head	events;
+	atomic_t		migr_state;
+	unsigned int		level;
+	int			numa_node;
+	unsigned int		num_children;
+	u8			childmask;
+	struct list_head	list;
+};
+
+/**
+ * struct tmigr_cpu - timer migration per CPU group
+ * @lock:		Lock protecting the tmigr_cpu group information
+ * @online:		Indicates whether the CPU is online; In deactivate path
+ *			it is required to know whether the migrator in the top
+ *			level group is to be set offline, while a timer is
+ *			pending. Then another online CPU needs to be notified to
+ *			take over the migrator role. Furthermore the information
+ *			is required in CPU hotplug path as the CPU is able to go
+ *			idle before the timer migration hierarchy hotplug AP is
+ *			reached. During this phase, the CPU has to handle the
+ *			global timers on its own and must not act as a migrator.
+ * @idle:		Indicates whether the CPU is idle in the timer migration
+ *			hierarchy
+ * @remote:		Is set when timers of the CPU are expired remotely
+ * @tmgroup:		Pointer to the parent group
+ * @childmask:		childmask of tmigr_cpu in the parent group
+ * @wakeup:		Stores the first timer when the timer migration
+ *			hierarchy is completely idle and remote expiry was done;
+ *			is returned to timer code in the idle path and is only
+ *			used in idle path.
+ * @cpuevt:		CPU event which could be enqueued into the parent group
+ */
+struct tmigr_cpu {
+	raw_spinlock_t		lock;
+	bool			online;
+	bool			idle;
+	bool			remote;
+	struct tmigr_group	*tmgroup;
+	u8			childmask;
+	u64			wakeup;
+	struct tmigr_event	cpuevt;
+};
+
+/**
+ * union tmigr_state - state of tmigr_group
+ * @state:	Combined version of the state - only used for atomic
+ *		read/cmpxchg function
+ * @struct:	Split version of the state - only use the struct members to
+ *		update information to stay independent of endianness
+ */
+union tmigr_state {
+	u32 state;
+	/**
+	 * struct - split state of tmigr_group
+	 * @active:	Contains each childmask bit of the active children
+	 * @migrator:	Contains childmask of the child which is migrator
+	 * @seq:	Sequence counter needs to be increased when an update
+	 *		to the tmigr_state is done. It prevents a race when
+	 *		updates in the child groups are propagated in changed
+	 *		order. Detailed information about the scenario is
+	 *		given in the documentation at the begin of
+	 *		timer_migration.c.
+	 */
+	struct {
+		u8	active;
+		u8	migrator;
+		u16	seq;
+	} __packed;
+};
+
+#if defined(CONFIG_SMP) && defined(CONFIG_NO_HZ_COMMON)
+extern void tmigr_handle_remote(void);
+extern bool tmigr_requires_handle_remote(void);
+extern void tmigr_cpu_activate(void);
+extern u64 tmigr_cpu_deactivate(u64 nextevt);
+extern u64 tmigr_cpu_new_timer(u64 nextevt);
+extern u64 tmigr_quick_check(u64 nextevt);
+#else
+static inline void tmigr_handle_remote(void) { }
+static inline bool tmigr_requires_handle_remote(void) { return false; }
+static inline void tmigr_cpu_activate(void) { }
+#endif
+
+#endif