Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6

13 files changed, 30 insertions, 715 deletions

diff --git a/include/asm-m68k/kbio.h b/include/asm-m68k/kbio.h
deleted file mode 100644
index e1fbf8fba3e88d..00000000000000
--- a/include/asm-m68k/kbio.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-sparc/kbio.h>
diff --git a/include/asm-m68k/vuid_event.h b/include/asm-m68k/vuid_event.h
deleted file mode 100644
index 52ecb521a3958a..00000000000000
--- a/include/asm-m68k/vuid_event.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef _M68K_VUID_EVENT_H
-#define _M68K_VUID_EVENT_H
-#include <asm-sparc/vuid_event.h>
-#endif
diff --git a/include/asm-sparc/audioio.h b/include/asm-sparc/audioio.h
deleted file mode 100644
index cf16173f521b00..00000000000000
--- a/include/asm-sparc/audioio.h
+++ /dev/null
@@ -1,234 +0,0 @@
-/*
- * include/asm-sparc/audioio.h
- *
- * Sparc Audio Midlayer
- * Copyright (C) 1996 Thomas K. Dyas (tdyas@noc.rutgers.edu)
- */
-
-#ifndef _AUDIOIO_H_
-#define _AUDIOIO_H_
-
-/*
- *	SunOS/Solaris /dev/audio interface
- */
-
-#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
-#include <linux/types.h>
-#include <linux/time.h>
-#include <linux/ioctl.h>
-#endif
-
-/*
- * This structure contains state information for audio device IO streams.
- */
-typedef struct audio_prinfo {
-	/*
-	 * The following values describe the audio data encoding.
-	 */
-	unsigned int sample_rate;	/* samples per second */
-	unsigned int channels;	/* number of interleaved channels */
-	unsigned int precision;	/* bit-width of each sample */
-	unsigned int encoding;	/* data encoding method */
-
-	/*
-	 * The following values control audio device configuration
-	 */
-	unsigned int gain;		/* gain level: 0 - 255 */
-	unsigned int port;		/* selected I/O port (see below) */
-	unsigned int avail_ports;	/* available I/O ports (see below) */
-	unsigned int _xxx[2];		/* Reserved for future use */
-
-	unsigned int buffer_size;	/* I/O buffer size */
-
-	/*
-	 * The following values describe driver state
-	 */
-	unsigned int samples;		/* number of samples converted */
-	unsigned int eof;		/* End Of File counter (play only) */
-
-	unsigned char	pause;		/* non-zero for pause, zero to resume */
-	unsigned char	error;		/* non-zero if overflow/underflow */
-	unsigned char	waiting;	/* non-zero if a process wants access */
-	unsigned char balance;	/* stereo channel balance */
-
-	unsigned short minordev;
-
-	/*
-	 * The following values are read-only state flags
-	 */
-	unsigned char open;		/* non-zero if open access permitted */
-	unsigned char active;		/* non-zero if I/O is active */
-} audio_prinfo_t;
-
-
-/*
- * This structure describes the current state of the audio device.
- */
-typedef struct audio_info {
-	/*
-	 * Per-stream information
-	 */
-	audio_prinfo_t play;	/* output status information */
-	audio_prinfo_t record;	/* input status information */
-
-	/*
-	 * Per-unit/channel information
-	 */
-	unsigned int monitor_gain;	/* input to output mix: 0 - 255 */
-	unsigned char output_muted;	/* non-zero if output is muted */
-	unsigned char _xxx[3];	/* Reserved for future use */
-	unsigned int _yyy[3];		/* Reserved for future use */
-} audio_info_t;
-
-
-/*
- * Audio encoding types
- */
-#define	AUDIO_ENCODING_NONE	(0)	/* no encoding assigned	  */
-#define	AUDIO_ENCODING_ULAW	(1)	/* u-law encoding	  */
-#define	AUDIO_ENCODING_ALAW	(2)	/* A-law encoding	  */
-#define	AUDIO_ENCODING_LINEAR	(3)	/* Linear PCM encoding	  */
-#define AUDIO_ENCODING_FLOAT    (4)     /* IEEE float (-1. <-> +1.) */
-#define	AUDIO_ENCODING_DVI	(104)	/* DVI ADPCM		  */
-#define	AUDIO_ENCODING_LINEAR8	(105)	/* 8 bit UNSIGNED	  */
-#define	AUDIO_ENCODING_LINEARLE	(106)	/* Linear PCM LE encoding */
-
-/*
- * These ranges apply to record, play, and monitor gain values
- */
-#define	AUDIO_MIN_GAIN	(0)	/* minimum gain value */
-#define	AUDIO_MAX_GAIN	(255)	/* maximum gain value */
-
-/*
- * These values apply to the balance field to adjust channel gain values
- */
-#define	AUDIO_LEFT_BALANCE	(0)	/* left channel only	*/
-#define	AUDIO_MID_BALANCE	(32)	/* equal left/right channel */
-#define	AUDIO_RIGHT_BALANCE	(64)	/* right channel only	*/
-#define	AUDIO_BALANCE_SHIFT	(3)
-
-/*
- * Generic minimum/maximum limits for number of channels, both modes
- */
-#define	AUDIO_MIN_PLAY_CHANNELS	(1)
-#define	AUDIO_MAX_PLAY_CHANNELS	(4)
-#define	AUDIO_MIN_REC_CHANNELS	(1)
-#define	AUDIO_MAX_REC_CHANNELS	(4)
-
-/*
- * Generic minimum/maximum limits for sample precision
- */
-#define	AUDIO_MIN_PLAY_PRECISION	(8)
-#define	AUDIO_MAX_PLAY_PRECISION	(32)
-#define	AUDIO_MIN_REC_PRECISION		(8)
-#define	AUDIO_MAX_REC_PRECISION		(32)
-
-/*
- * Define some convenient names for typical audio ports
- */
-/*
- * output ports (several may be enabled simultaneously)
- */
-#define	AUDIO_SPEAKER		0x01	/* output to built-in speaker */
-#define	AUDIO_HEADPHONE		0x02	/* output to headphone jack */
-#define	AUDIO_LINE_OUT		0x04	/* output to line out	 */
-
-/*
- * input ports (usually only one at a time)
- */
-#define	AUDIO_MICROPHONE	0x01	/* input from microphone */
-#define	AUDIO_LINE_IN		0x02	/* input from line in	 */
-#define	AUDIO_CD		0x04	/* input from on-board CD inputs */
-#define	AUDIO_INTERNAL_CD_IN	AUDIO_CD	/* input from internal CDROM */
-#define AUDIO_ANALOG_LOOPBACK   0x40    /* input from output */
-
-
-/*
- * This macro initializes an audio_info structure to 'harmless' values.
- * Note that (~0) might not be a harmless value for a flag that was
- * a signed int.
- */
-#define	AUDIO_INITINFO(i)	{					\
-	unsigned int	*__x__;						\
-	for (__x__ = (unsigned int *)(i);				\
-	    (char *) __x__ < (((char *)(i)) + sizeof (audio_info_t));	\
-	    *__x__++ = ~0);						\
-}
-
-/*
- * These allow testing for what the user wants to set 
- */
-#define AUD_INITVALUE   (~0)
-#define Modify(X)       ((unsigned int)(X) != AUD_INITVALUE)
-#define Modifys(X)      ((X) != (unsigned short)AUD_INITVALUE)
-#define Modifyc(X)      ((X) != (unsigned char)AUD_INITVALUE)
-
-/*
- * Parameter for the AUDIO_GETDEV ioctl to determine current
- * audio devices.
- */
-#define	MAX_AUDIO_DEV_LEN	(16)
-typedef struct audio_device {
-	char name[MAX_AUDIO_DEV_LEN];
-	char version[MAX_AUDIO_DEV_LEN];
-	char config[MAX_AUDIO_DEV_LEN];
-} audio_device_t;
-
-
-/*
- * Ioctl calls for the audio device.
- */
-
-/*
- * AUDIO_GETINFO retrieves the current state of the audio device.
- *
- * AUDIO_SETINFO copies all fields of the audio_info structure whose
- * values are not set to the initialized value (-1) to the device state.
- * It performs an implicit AUDIO_GETINFO to return the new state of the
- * device.  Note that the record.samples and play.samples fields are set
- * to the last value before the AUDIO_SETINFO took effect.  This allows
- * an application to reset the counters while atomically retrieving the
- * last value.
- *
- * AUDIO_DRAIN suspends the calling process until the write buffers are
- * empty.
- *
- * AUDIO_GETDEV returns a structure of type audio_device_t which contains
- * three strings.  The string "name" is a short identifying string (for
- * example, the SBus Fcode name string), the string "version" identifies
- * the current version of the device, and the "config" string identifies
- * the specific configuration of the audio stream.  All fields are
- * device-dependent -- see the device specific manual pages for details.
- *
- * AUDIO_GETDEV_SUNOS returns a number which is an audio device defined 
- * herein (making it not too portable)
- *
- * AUDIO_FLUSH stops all playback and recording, clears all queued buffers, 
- * resets error counters, and restarts recording and playback as appropriate
- * for the current sampling mode.
- */
-#define	AUDIO_GETINFO	_IOR('A', 1, audio_info_t)
-#define	AUDIO_SETINFO	_IOWR('A', 2, audio_info_t)
-#define	AUDIO_DRAIN	_IO('A', 3)
-#define	AUDIO_GETDEV	_IOR('A', 4, audio_device_t)
-#define	AUDIO_GETDEV_SUNOS	_IOR('A', 4, int)
-#define AUDIO_FLUSH     _IO('A', 5)
-
-/* Define possible audio hardware configurations for 
- * old SunOS-style AUDIO_GETDEV ioctl */
-#define AUDIO_DEV_UNKNOWN       (0)     /* not defined */
-#define AUDIO_DEV_AMD           (1)     /* audioamd device */
-#define AUDIO_DEV_SPEAKERBOX    (2)     /* dbri device with speakerbox */
-#define AUDIO_DEV_CODEC         (3)     /* dbri device (internal speaker) */
-#define AUDIO_DEV_CS4231        (5)     /* cs4231 device */
-
-/*
- * The following ioctl sets the audio device into an internal loopback mode,
- * if the hardware supports this.  The argument is TRUE to set loopback,
- * FALSE to reset to normal operation.  If the hardware does not support
- * internal loopback, the ioctl should fail with EINVAL.
- * Causes ADC data to be digitally mixed in and sent to the DAC.
- */
-#define	AUDIO_DIAG_LOOPBACK	_IOW('A', 101, int)
-
-#endif /* _AUDIOIO_H_ */
diff --git a/include/asm-sparc/kbio.h b/include/asm-sparc/kbio.h
deleted file mode 100644
index 3cf496bdf399a4..00000000000000
--- a/include/asm-sparc/kbio.h
+++ /dev/null
@@ -1,56 +0,0 @@
-#ifndef __LINUX_KBIO_H
-#define __LINUX_KBIO_H
-
-/* Return keyboard type */
-#define KIOCTYPE    _IOR('k', 9, int)
-/* Return Keyboard layout */
-#define KIOCLAYOUT  _IOR('k', 20, int)
-
-enum {
-    TR_NONE,
-    TR_ASCII,			/* keyboard is in regular state */
-    TR_EVENT,			/* keystrokes sent as firm events */
-    TR_UNTRANS_EVENT		/* EVENT+up and down+no translation */
-};
-
-/* Return the current keyboard translation */
-#define KIOCGTRANS  _IOR('k', 5, int)
-/* Set the keyboard translation */
-#define KIOCTRANS   _IOW('k', 0, int)
-
-/* Send a keyboard command */
-#define KIOCCMD     _IOW('k', 8, int)
-
-/* Return if keystrokes are being sent to /dev/kbd */
-
-/* Set routing of keystrokes to /dev/kbd */
-#define KIOCSDIRECT _IOW('k', 10, int)
-
-/* Set keyboard leds */
-#define KIOCSLED    _IOW('k', 14, unsigned char)
-
-/* Get keyboard leds */
-#define KIOCGLED    _IOR('k', 15, unsigned char)
-
-/* Used by KIOC[GS]RATE */
-struct kbd_rate {
-	unsigned char delay;	/* Delay in Hz before first repeat.	*/
-	unsigned char rate;	/* In characters per second (0..50).	*/
-};
-
-/* Set keyboard rate */
-#define KIOCSRATE   _IOW('k', 40, struct kbd_rate)
-
-/* Get keyboard rate */
-#define KIOCGRATE   _IOW('k', 41, struct kbd_rate)
-
-/* Top bit records if the key is up or down */
-#define KBD_UP      0x80
-
-/* Usable information */
-#define KBD_KEYMASK 0x7f
-
-/* All keys up */
-#define KBD_IDLE    0x75
-
-#endif /* __LINUX_KBIO_H */
diff --git a/include/asm-sparc/termios.h b/include/asm-sparc/termios.h
index 0a8ad4cac125c6..d05f83c809893c 100644
--- a/include/asm-sparc/termios.h
+++ b/include/asm-sparc/termios.h
@@ -38,15 +38,6 @@ struct sunos_ttysize {
 	int st_columns; /* Columns on the terminal */
 };
 
-/* Used for packet mode */
-#define TIOCPKT_DATA		 0
-#define TIOCPKT_FLUSHREAD	 1
-#define TIOCPKT_FLUSHWRITE	 2
-#define TIOCPKT_STOP		 4
-#define TIOCPKT_START		 8
-#define TIOCPKT_NOSTOP		16
-#define TIOCPKT_DOSTOP		32
-
 struct winsize {
 	unsigned short ws_row;
 	unsigned short ws_col;
diff --git a/include/asm-sparc/vuid_event.h b/include/asm-sparc/vuid_event.h
deleted file mode 100644
index 7781e9f2fdd31e..00000000000000
--- a/include/asm-sparc/vuid_event.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/* SunOS Virtual User Input Device (VUID) compatibility */
-
-
-typedef struct firm_event {
-	unsigned short id;	  /* tag for this event */
-	unsigned char  pair_type; /* unused by X11 */
-        unsigned char  pair;	  /* unused by X11 */
-        int            value;	  /* VKEY_UP, VKEY_DOWN or delta */
-        struct timeval time;
-} Firm_event;
-
-enum {
-    FE_PAIR_NONE,
-    FE_PAIR_SET,
-    FE_PAIR_DELTA,
-    FE_PAIR_ABSOLUTE
-};
-
-/* VUID stream formats */
-#define VUID_NATIVE     0	/* Native byte stream format */
-#define VUID_FIRM_EVENT 1	/* send firm_event structures */
-
-/* ioctls */
-    /* Set input device byte stream format (any of VUID_{NATIVE,FIRM_EVENT}) */
-#define VUIDSFORMAT   _IOW('v', 1, int)
-    /* Retrieve input device byte stream format */
-#define VUIDGFORMAT   _IOR('v', 2, int)
-
-/* Possible tag values */
-/*    mouse buttons: */
-#define MS_LEFT         0x7f20
-#define MS_MIDDLE       0x7f21
-#define MS_RIGHT        0x7f22
-/*    motion: */
-#define LOC_X_DELTA     0x7f80
-#define LOC_Y_DELTA     0x7f81
-#define LOC_X_ABSOLUTE  0x7f82  /* X compat, unsupported */
-#define LOC_Y_ABSOLUTE  0x7f83  /* X compat, unsupported */
-
-#define VKEY_UP   0
-#define VKEY_DOWN 1
diff --git a/include/asm-sparc64/audioio.h b/include/asm-sparc64/audioio.h
deleted file mode 100644
index cf16173f521b00..00000000000000
--- a/include/asm-sparc64/audioio.h
+++ /dev/null
@@ -1,234 +0,0 @@
-/*
- * include/asm-sparc/audioio.h
- *
- * Sparc Audio Midlayer
- * Copyright (C) 1996 Thomas K. Dyas (tdyas@noc.rutgers.edu)
- */
-
-#ifndef _AUDIOIO_H_
-#define _AUDIOIO_H_
-
-/*
- *	SunOS/Solaris /dev/audio interface
- */
-
-#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
-#include <linux/types.h>
-#include <linux/time.h>
-#include <linux/ioctl.h>
-#endif
-
-/*
- * This structure contains state information for audio device IO streams.
- */
-typedef struct audio_prinfo {
-	/*
-	 * The following values describe the audio data encoding.
-	 */
-	unsigned int sample_rate;	/* samples per second */
-	unsigned int channels;	/* number of interleaved channels */
-	unsigned int precision;	/* bit-width of each sample */
-	unsigned int encoding;	/* data encoding method */
-
-	/*
-	 * The following values control audio device configuration
-	 */
-	unsigned int gain;		/* gain level: 0 - 255 */
-	unsigned int port;		/* selected I/O port (see below) */
-	unsigned int avail_ports;	/* available I/O ports (see below) */
-	unsigned int _xxx[2];		/* Reserved for future use */
-
-	unsigned int buffer_size;	/* I/O buffer size */
-
-	/*
-	 * The following values describe driver state
-	 */
-	unsigned int samples;		/* number of samples converted */
-	unsigned int eof;		/* End Of File counter (play only) */
-
-	unsigned char	pause;		/* non-zero for pause, zero to resume */
-	unsigned char	error;		/* non-zero if overflow/underflow */
-	unsigned char	waiting;	/* non-zero if a process wants access */
-	unsigned char balance;	/* stereo channel balance */
-
-	unsigned short minordev;
-
-	/*
-	 * The following values are read-only state flags
-	 */
-	unsigned char open;		/* non-zero if open access permitted */
-	unsigned char active;		/* non-zero if I/O is active */
-} audio_prinfo_t;
-
-
-/*
- * This structure describes the current state of the audio device.
- */
-typedef struct audio_info {
-	/*
-	 * Per-stream information
-	 */
-	audio_prinfo_t play;	/* output status information */
-	audio_prinfo_t record;	/* input status information */
-
-	/*
-	 * Per-unit/channel information
-	 */
-	unsigned int monitor_gain;	/* input to output mix: 0 - 255 */
-	unsigned char output_muted;	/* non-zero if output is muted */
-	unsigned char _xxx[3];	/* Reserved for future use */
-	unsigned int _yyy[3];		/* Reserved for future use */
-} audio_info_t;
-
-
-/*
- * Audio encoding types
- */
-#define	AUDIO_ENCODING_NONE	(0)	/* no encoding assigned	  */
-#define	AUDIO_ENCODING_ULAW	(1)	/* u-law encoding	  */
-#define	AUDIO_ENCODING_ALAW	(2)	/* A-law encoding	  */
-#define	AUDIO_ENCODING_LINEAR	(3)	/* Linear PCM encoding	  */
-#define AUDIO_ENCODING_FLOAT    (4)     /* IEEE float (-1. <-> +1.) */
-#define	AUDIO_ENCODING_DVI	(104)	/* DVI ADPCM		  */
-#define	AUDIO_ENCODING_LINEAR8	(105)	/* 8 bit UNSIGNED	  */
-#define	AUDIO_ENCODING_LINEARLE	(106)	/* Linear PCM LE encoding */
-
-/*
- * These ranges apply to record, play, and monitor gain values
- */
-#define	AUDIO_MIN_GAIN	(0)	/* minimum gain value */
-#define	AUDIO_MAX_GAIN	(255)	/* maximum gain value */
-
-/*
- * These values apply to the balance field to adjust channel gain values
- */
-#define	AUDIO_LEFT_BALANCE	(0)	/* left channel only	*/
-#define	AUDIO_MID_BALANCE	(32)	/* equal left/right channel */
-#define	AUDIO_RIGHT_BALANCE	(64)	/* right channel only	*/
-#define	AUDIO_BALANCE_SHIFT	(3)
-
-/*
- * Generic minimum/maximum limits for number of channels, both modes
- */
-#define	AUDIO_MIN_PLAY_CHANNELS	(1)
-#define	AUDIO_MAX_PLAY_CHANNELS	(4)
-#define	AUDIO_MIN_REC_CHANNELS	(1)
-#define	AUDIO_MAX_REC_CHANNELS	(4)
-
-/*
- * Generic minimum/maximum limits for sample precision
- */
-#define	AUDIO_MIN_PLAY_PRECISION	(8)
-#define	AUDIO_MAX_PLAY_PRECISION	(32)
-#define	AUDIO_MIN_REC_PRECISION		(8)
-#define	AUDIO_MAX_REC_PRECISION		(32)
-
-/*
- * Define some convenient names for typical audio ports
- */
-/*
- * output ports (several may be enabled simultaneously)
- */
-#define	AUDIO_SPEAKER		0x01	/* output to built-in speaker */
-#define	AUDIO_HEADPHONE		0x02	/* output to headphone jack */
-#define	AUDIO_LINE_OUT		0x04	/* output to line out	 */
-
-/*
- * input ports (usually only one at a time)
- */
-#define	AUDIO_MICROPHONE	0x01	/* input from microphone */
-#define	AUDIO_LINE_IN		0x02	/* input from line in	 */
-#define	AUDIO_CD		0x04	/* input from on-board CD inputs */
-#define	AUDIO_INTERNAL_CD_IN	AUDIO_CD	/* input from internal CDROM */
-#define AUDIO_ANALOG_LOOPBACK   0x40    /* input from output */
-
-
-/*
- * This macro initializes an audio_info structure to 'harmless' values.
- * Note that (~0) might not be a harmless value for a flag that was
- * a signed int.
- */
-#define	AUDIO_INITINFO(i)	{					\
-	unsigned int	*__x__;						\
-	for (__x__ = (unsigned int *)(i);				\
-	    (char *) __x__ < (((char *)(i)) + sizeof (audio_info_t));	\
-	    *__x__++ = ~0);						\
-}
-
-/*
- * These allow testing for what the user wants to set 
- */
-#define AUD_INITVALUE   (~0)
-#define Modify(X)       ((unsigned int)(X) != AUD_INITVALUE)
-#define Modifys(X)      ((X) != (unsigned short)AUD_INITVALUE)
-#define Modifyc(X)      ((X) != (unsigned char)AUD_INITVALUE)
-
-/*
- * Parameter for the AUDIO_GETDEV ioctl to determine current
- * audio devices.
- */
-#define	MAX_AUDIO_DEV_LEN	(16)
-typedef struct audio_device {
-	char name[MAX_AUDIO_DEV_LEN];
-	char version[MAX_AUDIO_DEV_LEN];
-	char config[MAX_AUDIO_DEV_LEN];
-} audio_device_t;
-
-
-/*
- * Ioctl calls for the audio device.
- */
-
-/*
- * AUDIO_GETINFO retrieves the current state of the audio device.
- *
- * AUDIO_SETINFO copies all fields of the audio_info structure whose
- * values are not set to the initialized value (-1) to the device state.
- * It performs an implicit AUDIO_GETINFO to return the new state of the
- * device.  Note that the record.samples and play.samples fields are set
- * to the last value before the AUDIO_SETINFO took effect.  This allows
- * an application to reset the counters while atomically retrieving the
- * last value.
- *
- * AUDIO_DRAIN suspends the calling process until the write buffers are
- * empty.
- *
- * AUDIO_GETDEV returns a structure of type audio_device_t which contains
- * three strings.  The string "name" is a short identifying string (for
- * example, the SBus Fcode name string), the string "version" identifies
- * the current version of the device, and the "config" string identifies
- * the specific configuration of the audio stream.  All fields are
- * device-dependent -- see the device specific manual pages for details.
- *
- * AUDIO_GETDEV_SUNOS returns a number which is an audio device defined 
- * herein (making it not too portable)
- *
- * AUDIO_FLUSH stops all playback and recording, clears all queued buffers, 
- * resets error counters, and restarts recording and playback as appropriate
- * for the current sampling mode.
- */
-#define	AUDIO_GETINFO	_IOR('A', 1, audio_info_t)
-#define	AUDIO_SETINFO	_IOWR('A', 2, audio_info_t)
-#define	AUDIO_DRAIN	_IO('A', 3)
-#define	AUDIO_GETDEV	_IOR('A', 4, audio_device_t)
-#define	AUDIO_GETDEV_SUNOS	_IOR('A', 4, int)
-#define AUDIO_FLUSH     _IO('A', 5)
-
-/* Define possible audio hardware configurations for 
- * old SunOS-style AUDIO_GETDEV ioctl */
-#define AUDIO_DEV_UNKNOWN       (0)     /* not defined */
-#define AUDIO_DEV_AMD           (1)     /* audioamd device */
-#define AUDIO_DEV_SPEAKERBOX    (2)     /* dbri device with speakerbox */
-#define AUDIO_DEV_CODEC         (3)     /* dbri device (internal speaker) */
-#define AUDIO_DEV_CS4231        (5)     /* cs4231 device */
-
-/*
- * The following ioctl sets the audio device into an internal loopback mode,
- * if the hardware supports this.  The argument is TRUE to set loopback,
- * FALSE to reset to normal operation.  If the hardware does not support
- * internal loopback, the ioctl should fail with EINVAL.
- * Causes ADC data to be digitally mixed in and sent to the DAC.
- */
-#define	AUDIO_DIAG_LOOPBACK	_IOW('A', 101, int)
-
-#endif /* _AUDIOIO_H_ */
diff --git a/include/asm-sparc64/ebus.h b/include/asm-sparc64/ebus.h
index 543e4e500a72f4..7a408a030f52fa 100644
--- a/include/asm-sparc64/ebus.h
+++ b/include/asm-sparc64/ebus.h
@@ -79,6 +79,7 @@ extern int ebus_dma_request(struct ebus_dma_info *p, dma_addr_t bus_addr,
 			    size_t len);
 extern void ebus_dma_prepare(struct ebus_dma_info *p, int write);
 extern unsigned int ebus_dma_residue(struct ebus_dma_info *p);
+extern unsigned int ebus_dma_addr(struct ebus_dma_info *p);
 extern void ebus_dma_enable(struct ebus_dma_info *p, int on);
 
 extern struct linux_ebus		*ebus_chain;
diff --git a/include/asm-sparc64/kbio.h b/include/asm-sparc64/kbio.h
deleted file mode 100644
index 3cf496bdf399a4..00000000000000
--- a/include/asm-sparc64/kbio.h
+++ /dev/null
@@ -1,56 +0,0 @@
-#ifndef __LINUX_KBIO_H
-#define __LINUX_KBIO_H
-
-/* Return keyboard type */
-#define KIOCTYPE    _IOR('k', 9, int)
-/* Return Keyboard layout */
-#define KIOCLAYOUT  _IOR('k', 20, int)
-
-enum {
-    TR_NONE,
-    TR_ASCII,			/* keyboard is in regular state */
-    TR_EVENT,			/* keystrokes sent as firm events */
-    TR_UNTRANS_EVENT		/* EVENT+up and down+no translation */
-};
-
-/* Return the current keyboard translation */
-#define KIOCGTRANS  _IOR('k', 5, int)
-/* Set the keyboard translation */
-#define KIOCTRANS   _IOW('k', 0, int)
-
-/* Send a keyboard command */
-#define KIOCCMD     _IOW('k', 8, int)
-
-/* Return if keystrokes are being sent to /dev/kbd */
-
-/* Set routing of keystrokes to /dev/kbd */
-#define KIOCSDIRECT _IOW('k', 10, int)
-
-/* Set keyboard leds */
-#define KIOCSLED    _IOW('k', 14, unsigned char)
-
-/* Get keyboard leds */
-#define KIOCGLED    _IOR('k', 15, unsigned char)
-
-/* Used by KIOC[GS]RATE */
-struct kbd_rate {
-	unsigned char delay;	/* Delay in Hz before first repeat.	*/
-	unsigned char rate;	/* In characters per second (0..50).	*/
-};
-
-/* Set keyboard rate */
-#define KIOCSRATE   _IOW('k', 40, struct kbd_rate)
-
-/* Get keyboard rate */
-#define KIOCGRATE   _IOW('k', 41, struct kbd_rate)
-
-/* Top bit records if the key is up or down */
-#define KBD_UP      0x80
-
-/* Usable information */
-#define KBD_KEYMASK 0x7f
-
-/* All keys up */
-#define KBD_IDLE    0x75
-
-#endif /* __LINUX_KBIO_H */
diff --git a/include/asm-sparc64/mmu_context.h b/include/asm-sparc64/mmu_context.h
index 87c43c67866e9b..08ba72d7722c9c 100644
--- a/include/asm-sparc64/mmu_context.h
+++ b/include/asm-sparc64/mmu_context.h
@@ -87,37 +87,35 @@ extern void __flush_tlb_mm(unsigned long, unsigned long);
 static inline void switch_mm(struct mm_struct *old_mm, struct mm_struct *mm, struct task_struct *tsk)
 {
 	unsigned long ctx_valid;
+	int cpu;
 
+	/* Note: page_table_lock is used here to serialize switch_mm
+	 * and activate_mm, and their calls to get_new_mmu_context.
+	 * This use of page_table_lock is unrelated to its other uses.
+	 */ 
 	spin_lock(&mm->page_table_lock);
-	if (CTX_VALID(mm->context))
-		ctx_valid = 1;
-        else
-		ctx_valid = 0;
+	ctx_valid = CTX_VALID(mm->context);
+	if (!ctx_valid)
+		get_new_mmu_context(mm);
+	spin_unlock(&mm->page_table_lock);
 
 	if (!ctx_valid || (old_mm != mm)) {
-		if (!ctx_valid)
-			get_new_mmu_context(mm);
-
 		load_secondary_context(mm);
 		reload_tlbmiss_state(tsk, mm);
 	}
 
-	{
-		int cpu = smp_processor_id();
-
-		/* Even if (mm == old_mm) we _must_ check
-		 * the cpu_vm_mask.  If we do not we could
-		 * corrupt the TLB state because of how
-		 * smp_flush_tlb_{page,range,mm} on sparc64
-		 * and lazy tlb switches work. -DaveM
-		 */
-		if (!ctx_valid || !cpu_isset(cpu, mm->cpu_vm_mask)) {
-			cpu_set(cpu, mm->cpu_vm_mask);
-			__flush_tlb_mm(CTX_HWBITS(mm->context),
-				       SECONDARY_CONTEXT);
-		}
+	/* Even if (mm == old_mm) we _must_ check
+	 * the cpu_vm_mask.  If we do not we could
+	 * corrupt the TLB state because of how
+	 * smp_flush_tlb_{page,range,mm} on sparc64
+	 * and lazy tlb switches work. -DaveM
+	 */
+	cpu = smp_processor_id();
+	if (!ctx_valid || !cpu_isset(cpu, mm->cpu_vm_mask)) {
+		cpu_set(cpu, mm->cpu_vm_mask);
+		__flush_tlb_mm(CTX_HWBITS(mm->context),
+			       SECONDARY_CONTEXT);
 	}
-	spin_unlock(&mm->page_table_lock);
 }
 
 #define deactivate_mm(tsk,mm)	do { } while (0)
@@ -127,6 +125,10 @@ static inline void activate_mm(struct mm_struct *active_mm, struct mm_struct *mm
 {
 	int cpu;
 
+	/* Note: page_table_lock is used here to serialize switch_mm
+	 * and activate_mm, and their calls to get_new_mmu_context.
+	 * This use of page_table_lock is unrelated to its other uses.
+	 */ 
 	spin_lock(&mm->page_table_lock);
 	if (!CTX_VALID(mm->context))
 		get_new_mmu_context(mm);
diff --git a/include/asm-sparc64/termios.h b/include/asm-sparc64/termios.h
index 9777a9cca88aa9..ee26a071c67776 100644
--- a/include/asm-sparc64/termios.h
+++ b/include/asm-sparc64/termios.h
@@ -38,15 +38,6 @@ struct sunos_ttysize {
 	int st_columns; /* Columns on the terminal */
 };
 
-/* Used for packet mode */
-#define TIOCPKT_DATA		 0
-#define TIOCPKT_FLUSHREAD	 1
-#define TIOCPKT_FLUSHWRITE	 2
-#define TIOCPKT_STOP		 4
-#define TIOCPKT_START		 8
-#define TIOCPKT_NOSTOP		16
-#define TIOCPKT_DOSTOP		32
-
 struct winsize {
 	unsigned short ws_row;
 	unsigned short ws_col;
diff --git a/include/asm-sparc64/tlb.h b/include/asm-sparc64/tlb.h
index 66138d959df5e2..61c01882b5629d 100644
--- a/include/asm-sparc64/tlb.h
+++ b/include/asm-sparc64/tlb.h
@@ -58,11 +58,9 @@ static inline struct mmu_gather *tlb_gather_mmu(struct mm_struct *mm, unsigned i
 static inline void tlb_flush_mmu(struct mmu_gather *mp)
 {
 	if (mp->need_flush) {
+		free_pages_and_swap_cache(mp->pages, mp->pages_nr);
+		mp->pages_nr = 0;
 		mp->need_flush = 0;
-		if (!tlb_fast_mode(mp)) {
-			free_pages_and_swap_cache(mp->pages, mp->pages_nr);
-			mp->pages_nr = 0;
-		}
 	}
 
 }
@@ -78,11 +76,9 @@ static inline void tlb_finish_mmu(struct mmu_gather *mp, unsigned long start, un
 {
 	tlb_flush_mmu(mp);
 
-	if (mp->fullmm) {
-		if (CTX_VALID(mp->mm->context))
-			do_flush_tlb_mm(mp->mm);
+	if (mp->fullmm)
 		mp->fullmm = 0;
-	} else
+	else
 		flush_tlb_pending();
 
 	/* keep the page table cache within bounds */
@@ -93,11 +89,11 @@ static inline void tlb_finish_mmu(struct mmu_gather *mp, unsigned long start, un
 
 static inline void tlb_remove_page(struct mmu_gather *mp, struct page *page)
 {
-	mp->need_flush = 1;
 	if (tlb_fast_mode(mp)) {
 		free_page_and_swap_cache(page);
 		return;
 	}
+	mp->need_flush = 1;
 	mp->pages[mp->pages_nr++] = page;
 	if (mp->pages_nr >= FREE_PTE_NR)
 		tlb_flush_mmu(mp);
diff --git a/include/asm-sparc64/vuid_event.h b/include/asm-sparc64/vuid_event.h
deleted file mode 100644
index 9ef4d17ad08f0e..00000000000000
--- a/include/asm-sparc64/vuid_event.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* SunOS Virtual User Input Device (VUID) compatibility */
-
-typedef struct firm_event {
-	unsigned short id;	  /* tag for this event */
-	unsigned char  pair_type; /* unused by X11 */
-        unsigned char  pair;	  /* unused by X11 */
-        int            value;	  /* VKEY_UP, VKEY_DOWN or delta */
-        struct timeval time;
-} Firm_event;
-
-enum {
-    FE_PAIR_NONE,
-    FE_PAIR_SET,
-    FE_PAIR_DELTA,
-    FE_PAIR_ABSOLUTE
-};
-
-/* VUID stream formats */
-#define VUID_NATIVE     0	/* Native byte stream format */
-#define VUID_FIRM_EVENT 1	/* send firm_event structures */
-
-/* ioctls */
-    /* Set input device byte stream format (any of VUID_{NATIVE,FIRM_EVENT}) */
-#define VUIDSFORMAT   _IOW('v', 1, int)
-    /* Retrieve input device byte stream format */
-#define VUIDGFORMAT   _IOR('v', 2, int)
-
-/* Possible tag values */
-/*    mouse buttons: */
-#define MS_LEFT         0x7f20
-#define MS_MIDDLE       0x7f21
-#define MS_RIGHT        0x7f22
-/*    motion: */
-#define LOC_X_DELTA     0x7f80
-#define LOC_Y_DELTA     0x7f81
-#define LOC_X_ABSOLUTE  0x7f82  /* X compat, unsupported */
-#define LOC_Y_ABSOLUTE  0x7f83  /* X compat, unsupported */
-
-#define VKEY_UP   0
-#define VKEY_DOWN 1