Merge branch 'master' into upstream

14 files changed, 160 insertions, 161 deletions

diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c
index abbdb37a7f5f3..f36db22ce1aeb 100644
--- a/drivers/acpi/processor_perflib.c
+++ b/drivers/acpi/processor_perflib.c
@@ -577,6 +577,8 @@ acpi_processor_register_performance(struct acpi_processor_performance
 		return_VALUE(-EBUSY);
 	}
 
+	WARN_ON(!performance);
+
 	pr->performance = performance;
 
 	if (acpi_processor_get_performance_info(pr)) {
@@ -609,7 +611,8 @@ acpi_processor_unregister_performance(struct acpi_processor_performance
 		return_VOID;
 	}
 
-	kfree(pr->performance->states);
+	if (pr->performance)
+		kfree(pr->performance->states);
 	pr->performance = NULL;
 
 	acpi_cpufreq_remove_file(pr);
diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index f5b01c6d498e1..fb919bfb2824e 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -41,9 +41,9 @@ obj-$(CONFIG_N_HDLC)		+= n_hdlc.o
 obj-$(CONFIG_AMIGA_BUILTIN_SERIAL) += amiserial.o
 obj-$(CONFIG_SX)		+= sx.o generic_serial.o
 obj-$(CONFIG_RIO)		+= rio/ generic_serial.o
-obj-$(CONFIG_HVC_DRIVER)	+= hvc_console.o
 obj-$(CONFIG_HVC_CONSOLE)	+= hvc_vio.o hvsi.o
 obj-$(CONFIG_HVC_RTAS)		+= hvc_rtas.o
+obj-$(CONFIG_HVC_DRIVER)	+= hvc_console.o
 obj-$(CONFIG_RAW_DRIVER)	+= raw.o
 obj-$(CONFIG_SGI_SNSC)		+= snsc.o snsc_event.o
 obj-$(CONFIG_MMTIMER)		+= mmtimer.o
diff --git a/drivers/char/n_tty.c b/drivers/char/n_tty.c
index ede365d053870..b9371d5bf7906 100644
--- a/drivers/char/n_tty.c
+++ b/drivers/char/n_tty.c
@@ -1384,8 +1384,10 @@ do_it_again:
 		 * longer than TTY_THRESHOLD_UNTHROTTLE in canonical mode,
 		 * we won't get any more characters.
 		 */
-		if (n_tty_chars_in_buffer(tty) <= TTY_THRESHOLD_UNTHROTTLE)
+		if (n_tty_chars_in_buffer(tty) <= TTY_THRESHOLD_UNTHROTTLE) {
+			n_tty_set_room(tty);
 			check_unthrottle(tty);
+		}
 
 		if (b - buf >= minimum)
 			break;
diff --git a/drivers/message/fusion/mptspi.c b/drivers/message/fusion/mptspi.c
index f2a4d382ea19e..3201de053943c 100644
--- a/drivers/message/fusion/mptspi.c
+++ b/drivers/message/fusion/mptspi.c
@@ -831,6 +831,7 @@ mptspi_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
 	return rc;
 }
 
+#ifdef CONFIG_PM
 /*
  * spi module resume handler
  */
@@ -846,6 +847,7 @@ mptspi_resume(struct pci_dev *pdev)
 
 	return rc;
 }
+#endif
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
diff --git a/drivers/message/i2o/exec-osm.c b/drivers/message/i2o/exec-osm.c
index 5ea133c59afb3..7bd4d85d0b42d 100644
--- a/drivers/message/i2o/exec-osm.c
+++ b/drivers/message/i2o/exec-osm.c
@@ -55,6 +55,7 @@ struct i2o_exec_wait {
 	u32 m;			/* message id */
 	struct i2o_message *msg;	/* pointer to the reply message */
 	struct list_head list;	/* node in global wait list */
+	spinlock_t lock;	/* lock before modifying */
 };
 
 /* Work struct needed to handle LCT NOTIFY replies */
@@ -87,6 +88,7 @@ static struct i2o_exec_wait *i2o_exec_wait_alloc(void)
 		return NULL;
 
 	INIT_LIST_HEAD(&wait->list);
+	spin_lock_init(&wait->lock);
 
 	return wait;
 };
@@ -125,6 +127,7 @@ int i2o_msg_post_wait_mem(struct i2o_controller *c, struct i2o_message *msg,
 	DECLARE_WAIT_QUEUE_HEAD(wq);
 	struct i2o_exec_wait *wait;
 	static u32 tcntxt = 0x80000000;
+	long flags;
 	int rc = 0;
 
 	wait = i2o_exec_wait_alloc();
@@ -146,33 +149,28 @@ int i2o_msg_post_wait_mem(struct i2o_controller *c, struct i2o_message *msg,
 	wait->tcntxt = tcntxt++;
 	msg->u.s.tcntxt = cpu_to_le32(wait->tcntxt);
 
+	wait->wq = &wq;
+	/*
+	 * we add elements to the head, because if a entry in the list will
+	 * never be removed, we have to iterate over it every time
+	 */
+	list_add(&wait->list, &i2o_exec_wait_list);
+
 	/*
 	 * Post the message to the controller. At some point later it will
 	 * return. If we time out before it returns then complete will be zero.
 	 */
 	i2o_msg_post(c, msg);
 
-	if (!wait->complete) {
-		wait->wq = &wq;
-		/*
-		 * we add elements add the head, because if a entry in the list
-		 * will never be removed, we have to iterate over it every time
-		 */
-		list_add(&wait->list, &i2o_exec_wait_list);
-
-		wait_event_interruptible_timeout(wq, wait->complete,
-						 timeout * HZ);
+	wait_event_interruptible_timeout(wq, wait->complete, timeout * HZ);
 
-		wait->wq = NULL;
-	}
+	spin_lock_irqsave(&wait->lock, flags);
 
-	barrier();
+	wait->wq = NULL;
 
-	if (wait->complete) {
+	if (wait->complete)
 		rc = le32_to_cpu(wait->msg->body[0]) >> 24;
-		i2o_flush_reply(c, wait->m);
-		i2o_exec_wait_free(wait);
-	} else {
+	else {
 		/*
 		 * We cannot remove it now. This is important. When it does
 		 * terminate (which it must do if the controller has not
@@ -186,6 +184,13 @@ int i2o_msg_post_wait_mem(struct i2o_controller *c, struct i2o_message *msg,
 		rc = -ETIMEDOUT;
 	}
 
+	spin_unlock_irqrestore(&wait->lock, flags);
+
+	if (rc != -ETIMEDOUT) {
+		i2o_flush_reply(c, wait->m);
+		i2o_exec_wait_free(wait);
+	}
+
 	return rc;
 };
 
@@ -213,7 +218,6 @@ static int i2o_msg_post_wait_complete(struct i2o_controller *c, u32 m,
 {
 	struct i2o_exec_wait *wait, *tmp;
 	unsigned long flags;
-	static spinlock_t lock = SPIN_LOCK_UNLOCKED;
 	int rc = 1;
 
 	/*
@@ -223,23 +227,24 @@ static int i2o_msg_post_wait_complete(struct i2o_controller *c, u32 m,
 	 * already expired. Not much we can do about that except log it for
 	 * debug purposes, increase timeout, and recompile.
 	 */
-	spin_lock_irqsave(&lock, flags);
 	list_for_each_entry_safe(wait, tmp, &i2o_exec_wait_list, list) {
 		if (wait->tcntxt == context) {
-			list_del(&wait->list);
+			spin_lock_irqsave(&wait->lock, flags);
 
-			spin_unlock_irqrestore(&lock, flags);
+			list_del(&wait->list);
 
 			wait->m = m;
 			wait->msg = msg;
 			wait->complete = 1;
 
-			barrier();
-
-			if (wait->wq) {
-				wake_up_interruptible(wait->wq);
+			if (wait->wq)
 				rc = 0;
-			} else {
+			else
+				rc = -1;
+
+			spin_unlock_irqrestore(&wait->lock, flags);
+
+			if (rc) {
 				struct device *dev;
 
 				dev = &c->pdev->dev;
@@ -248,15 +253,13 @@ static int i2o_msg_post_wait_complete(struct i2o_controller *c, u32 m,
 					 c->name);
 				i2o_dma_free(dev, &wait->dma);
 				i2o_exec_wait_free(wait);
-				rc = -1;
-			}
+			} else
+				wake_up_interruptible(wait->wq);
 
 			return rc;
 		}
 	}
 
-	spin_unlock_irqrestore(&lock, flags);
-
 	osm_warn("%s: Bogus reply in POST WAIT (tr-context: %08x)!\n", c->name,
 		 context);
 
@@ -322,14 +325,9 @@ static DEVICE_ATTR(product_id, S_IRUGO, i2o_exec_show_product_id, NULL);
 static int i2o_exec_probe(struct device *dev)
 {
 	struct i2o_device *i2o_dev = to_i2o_device(dev);
-	struct i2o_controller *c = i2o_dev->iop;
 
 	i2o_event_register(i2o_dev, &i2o_exec_driver, 0, 0xffffffff);
 
-	c->exec = i2o_dev;
-
-	i2o_exec_lct_notify(c, c->lct->change_ind + 1);
-
 	device_create_file(dev, &dev_attr_vendor_id);
 	device_create_file(dev, &dev_attr_product_id);
 
@@ -523,6 +521,8 @@ static int i2o_exec_lct_notify(struct i2o_controller *c, u32 change_ind)
 	struct device *dev;
 	struct i2o_message *msg;
 
+	down(&c->lct_lock);
+
 	dev = &c->pdev->dev;
 
 	if (i2o_dma_realloc
@@ -545,6 +545,8 @@ static int i2o_exec_lct_notify(struct i2o_controller *c, u32 change_ind)
 
 	i2o_msg_post(c, msg);
 
+	up(&c->lct_lock);
+
 	return 0;
 };
 
diff --git a/drivers/message/i2o/iop.c b/drivers/message/i2o/iop.c
index 4921674469365..febbdd4e0605d 100644
--- a/drivers/message/i2o/iop.c
+++ b/drivers/message/i2o/iop.c
@@ -804,8 +804,6 @@ void i2o_iop_remove(struct i2o_controller *c)
 
 	/* Ask the IOP to switch to RESET state */
 	i2o_iop_reset(c);
-
-	put_device(&c->device);
 }
 
 /**
@@ -1059,7 +1057,7 @@ struct i2o_controller *i2o_iop_alloc(void)
 
 	snprintf(poolname, sizeof(poolname), "i2o_%s_msg_inpool", c->name);
 	if (i2o_pool_alloc
-	    (&c->in_msg, poolname, I2O_INBOUND_MSG_FRAME_SIZE * 4,
+	    (&c->in_msg, poolname, I2O_INBOUND_MSG_FRAME_SIZE * 4 + sizeof(u32),
 	     I2O_MSG_INPOOL_MIN)) {
 		kfree(c);
 		return ERR_PTR(-ENOMEM);
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 959109609d852..97fe95666f3b8 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -187,12 +187,11 @@ static u16 gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg)
 	return v;
 }
 
-static int sky2_set_power_state(struct sky2_hw *hw, pci_power_t state)
+static void sky2_set_power_state(struct sky2_hw *hw, pci_power_t state)
 {
 	u16 power_control;
 	u32 reg1;
 	int vaux;
-	int ret = 0;
 
 	pr_debug("sky2_set_power_state %d\n", state);
 	sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
@@ -275,12 +274,10 @@ static int sky2_set_power_state(struct sky2_hw *hw, pci_power_t state)
 		break;
 	default:
 		printk(KERN_ERR PFX "Unknown power state %d\n", state);
-		ret = -1;
 	}
 
 	sky2_pci_write16(hw, hw->pm_cap + PCI_PM_CTRL, power_control);
 	sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
-	return ret;
 }
 
 static void sky2_phy_reset(struct sky2_hw *hw, unsigned port)
@@ -2164,6 +2161,13 @@ static void sky2_descriptor_error(struct sky2_hw *hw, unsigned port,
 /* If idle then force a fake soft NAPI poll once a second
  * to work around cases where sharing an edge triggered interrupt.
  */
+static inline void sky2_idle_start(struct sky2_hw *hw)
+{
+	if (idle_timeout > 0)
+		mod_timer(&hw->idle_timer,
+			  jiffies + msecs_to_jiffies(idle_timeout));
+}
+
 static void sky2_idle(unsigned long arg)
 {
 	struct sky2_hw *hw = (struct sky2_hw *) arg;
@@ -2183,6 +2187,9 @@ static int sky2_poll(struct net_device *dev0, int *budget)
 	int work_done = 0;
 	u32 status = sky2_read32(hw, B0_Y2_SP_EISR);
 
+	if (!~status)
+		goto out;
+
 	if (status & Y2_IS_HW_ERR)
 		sky2_hw_intr(hw);
 
@@ -2219,7 +2226,7 @@ static int sky2_poll(struct net_device *dev0, int *budget)
 
 	if (sky2_more_work(hw))
 		return 1;
-
+out:
 	netif_rx_complete(dev0);
 
 	sky2_read32(hw, B0_Y2_SP_LISR);
@@ -3350,9 +3357,7 @@ static int __devinit sky2_probe(struct pci_dev *pdev,
 	sky2_write32(hw, B0_IMSK, Y2_IS_BASE);
 
 	setup_timer(&hw->idle_timer, sky2_idle, (unsigned long) hw);
-	if (idle_timeout > 0)
-		mod_timer(&hw->idle_timer,
-			  jiffies + msecs_to_jiffies(idle_timeout));
+	sky2_idle_start(hw);
 
 	pci_set_drvdata(pdev, hw);
 
@@ -3425,8 +3430,14 @@ static int sky2_suspend(struct pci_dev *pdev, pm_message_t state)
 {
 	struct sky2_hw *hw = pci_get_drvdata(pdev);
 	int i;
+	pci_power_t pstate = pci_choose_state(pdev, state);
+
+	if (!(pstate == PCI_D3hot || pstate == PCI_D3cold))
+		return -EINVAL;
+
+	del_timer_sync(&hw->idle_timer);
 
-	for (i = 0; i < 2; i++) {
+	for (i = 0; i < hw->ports; i++) {
 		struct net_device *dev = hw->dev[i];
 
 		if (dev) {
@@ -3438,7 +3449,10 @@ static int sky2_suspend(struct pci_dev *pdev, pm_message_t state)
 		}
 	}
 
-	return sky2_set_power_state(hw, pci_choose_state(pdev, state));
+	sky2_write32(hw, B0_IMSK, 0);
+	pci_save_state(pdev);
+	sky2_set_power_state(hw, pstate);
+	return 0;
 }
 
 static int sky2_resume(struct pci_dev *pdev)
@@ -3448,15 +3462,15 @@ static int sky2_resume(struct pci_dev *pdev)
 
 	pci_restore_state(pdev);
 	pci_enable_wake(pdev, PCI_D0, 0);
-	err = sky2_set_power_state(hw, PCI_D0);
-	if (err)
-		goto out;
+	sky2_set_power_state(hw, PCI_D0);
 
 	err = sky2_reset(hw);
 	if (err)
 		goto out;
 
-	for (i = 0; i < 2; i++) {
+	sky2_write32(hw, B0_IMSK, Y2_IS_BASE);
+
+	for (i = 0; i < hw->ports; i++) {
 		struct net_device *dev = hw->dev[i];
 		if (dev && netif_running(dev)) {
 			netif_device_attach(dev);
@@ -3465,10 +3479,12 @@ static int sky2_resume(struct pci_dev *pdev)
 				printk(KERN_ERR PFX "%s: could not up: %d\n",
 				       dev->name, err);
 				dev_close(dev);
-				break;
+				goto out;
 			}
 		}
 	}
+
+	sky2_idle_start(hw);
 out:
 	return err;
 }
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 49ad60b726579..862c226dbbe24 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -69,8 +69,8 @@
 
 #define DRV_MODULE_NAME		"tg3"
 #define PFX DRV_MODULE_NAME	": "
-#define DRV_MODULE_VERSION	"3.58"
-#define DRV_MODULE_RELDATE	"May 22, 2006"
+#define DRV_MODULE_VERSION	"3.59"
+#define DRV_MODULE_RELDATE	"June 8, 2006"
 
 #define TG3_DEF_MAC_MODE	0
 #define TG3_DEF_RX_MODE		0
@@ -4485,9 +4485,8 @@ static void tg3_disable_nvram_access(struct tg3 *tp)
 /* tp->lock is held. */
 static void tg3_write_sig_pre_reset(struct tg3 *tp, int kind)
 {
-	if (!(tp->tg3_flags2 & TG3_FLG2_SUN_570X))
-		tg3_write_mem(tp, NIC_SRAM_FIRMWARE_MBOX,
-			      NIC_SRAM_FIRMWARE_MBOX_MAGIC1);
+	tg3_write_mem(tp, NIC_SRAM_FIRMWARE_MBOX,
+		      NIC_SRAM_FIRMWARE_MBOX_MAGIC1);
 
 	if (tp->tg3_flags2 & TG3_FLG2_ASF_NEW_HANDSHAKE) {
 		switch (kind) {
@@ -4568,13 +4567,12 @@ static int tg3_chip_reset(struct tg3 *tp)
 	void (*write_op)(struct tg3 *, u32, u32);
 	int i;
 
-	if (!(tp->tg3_flags2 & TG3_FLG2_SUN_570X)) {
-		tg3_nvram_lock(tp);
-		/* No matching tg3_nvram_unlock() after this because
-		 * chip reset below will undo the nvram lock.
-		 */
-		tp->nvram_lock_cnt = 0;
-	}
+	tg3_nvram_lock(tp);
+
+	/* No matching tg3_nvram_unlock() after this because
+	 * chip reset below will undo the nvram lock.
+	 */
+	tp->nvram_lock_cnt = 0;
 
 	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5752 ||
 	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755 ||
@@ -4727,20 +4725,25 @@ static int tg3_chip_reset(struct tg3 *tp)
 		tw32_f(MAC_MODE, 0);
 	udelay(40);
 
-	if (!(tp->tg3_flags2 & TG3_FLG2_SUN_570X)) {
-		/* Wait for firmware initialization to complete. */
-		for (i = 0; i < 100000; i++) {
-			tg3_read_mem(tp, NIC_SRAM_FIRMWARE_MBOX, &val);
-			if (val == ~NIC_SRAM_FIRMWARE_MBOX_MAGIC1)
-				break;
-			udelay(10);
-		}
-		if (i >= 100000) {
-			printk(KERN_ERR PFX "tg3_reset_hw timed out for %s, "
-			       "firmware will not restart magic=%08x\n",
-			       tp->dev->name, val);
-			return -ENODEV;
-		}
+	/* Wait for firmware initialization to complete. */
+	for (i = 0; i < 100000; i++) {
+		tg3_read_mem(tp, NIC_SRAM_FIRMWARE_MBOX, &val);
+		if (val == ~NIC_SRAM_FIRMWARE_MBOX_MAGIC1)
+			break;
+		udelay(10);
+	}
+
+	/* Chip might not be fitted with firmare.  Some Sun onboard
+	 * parts are configured like that.  So don't signal the timeout
+	 * of the above loop as an error, but do report the lack of
+	 * running firmware once.
+	 */
+	if (i >= 100000 &&
+	    !(tp->tg3_flags2 & TG3_FLG2_NO_FWARE_REPORTED)) {
+		tp->tg3_flags2 |= TG3_FLG2_NO_FWARE_REPORTED;
+
+		printk(KERN_INFO PFX "%s: No firmware running.\n",
+		       tp->dev->name);
 	}
 
 	if ((tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS) &&
@@ -9075,9 +9078,6 @@ static void __devinit tg3_nvram_init(struct tg3 *tp)
 {
 	int j;
 
-	if (tp->tg3_flags2 & TG3_FLG2_SUN_570X)
-		return;
-
 	tw32_f(GRC_EEPROM_ADDR,
 	     (EEPROM_ADDR_FSM_RESET |
 	      (EEPROM_DEFAULT_CLOCK_PERIOD <<
@@ -9210,11 +9210,6 @@ static int tg3_nvram_read(struct tg3 *tp, u32 offset, u32 *val)
 {
 	int ret;
 
-	if (tp->tg3_flags2 & TG3_FLG2_SUN_570X) {
-		printk(KERN_ERR PFX "Attempt to do nvram_read on Sun 570X\n");
-		return -EINVAL;
-	}
-
 	if (!(tp->tg3_flags & TG3_FLAG_NVRAM))
 		return tg3_nvram_read_using_eeprom(tp, offset, val);
 
@@ -9447,11 +9442,6 @@ static int tg3_nvram_write_block(struct tg3 *tp, u32 offset, u32 len, u8 *buf)
 {
 	int ret;
 
-	if (tp->tg3_flags2 & TG3_FLG2_SUN_570X) {
-		printk(KERN_ERR PFX "Attempt to do nvram_write on Sun 570X\n");
-		return -EINVAL;
-	}
-
 	if (tp->tg3_flags & TG3_FLAG_EEPROM_WRITE_PROT) {
 		tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl &
 		       ~GRC_LCLCTRL_GPIO_OUTPUT1);
@@ -9578,15 +9568,19 @@ static void __devinit tg3_get_eeprom_hw_cfg(struct tg3 *tp)
 	pci_write_config_dword(tp->pdev, TG3PCI_MISC_HOST_CTRL,
 			       tp->misc_host_ctrl);
 
+	/* The memory arbiter has to be enabled in order for SRAM accesses
+	 * to succeed.  Normally on powerup the tg3 chip firmware will make
+	 * sure it is enabled, but other entities such as system netboot
+	 * code might disable it.
+	 */
+	val = tr32(MEMARB_MODE);
+	tw32(MEMARB_MODE, val | MEMARB_MODE_ENABLE);
+
 	tp->phy_id = PHY_ID_INVALID;
 	tp->led_ctrl = LED_CTRL_MODE_PHY_1;
 
-	/* Do not even try poking around in here on Sun parts.  */
-	if (tp->tg3_flags2 & TG3_FLG2_SUN_570X) {
-		/* All SUN chips are built-in LOMs. */
-		tp->tg3_flags |= TG3_FLAG_EEPROM_WRITE_PROT;
-		return;
-	}
+	/* Assume an onboard device by default.  */
+	tp->tg3_flags |= TG3_FLAG_EEPROM_WRITE_PROT;
 
 	tg3_read_mem(tp, NIC_SRAM_DATA_SIG, &val);
 	if (val == NIC_SRAM_DATA_SIG_MAGIC) {
@@ -9686,6 +9680,8 @@ static void __devinit tg3_get_eeprom_hw_cfg(struct tg3 *tp)
 
 		if (nic_cfg & NIC_SRAM_DATA_CFG_EEPROM_WP)
 			tp->tg3_flags |= TG3_FLAG_EEPROM_WRITE_PROT;
+		else
+			tp->tg3_flags &= ~TG3_FLAG_EEPROM_WRITE_PROT;
 
 		if (nic_cfg & NIC_SRAM_DATA_CFG_ASF_ENABLE) {
 			tp->tg3_flags |= TG3_FLAG_ENABLE_ASF;
@@ -9834,16 +9830,8 @@ static void __devinit tg3_read_partno(struct tg3 *tp)
 	int i;
 	u32 magic;
 
-	if (tp->tg3_flags2 & TG3_FLG2_SUN_570X) {
-		/* Sun decided not to put the necessary bits in the
-		 * NVRAM of their onboard tg3 parts :(
-		 */
-		strcpy(tp->board_part_number, "Sun 570X");
-		return;
-	}
-
 	if (tg3_nvram_read_swab(tp, 0x0, &magic))
-		return;
+		goto out_not_found;
 
 	if (magic == TG3_EEPROM_MAGIC) {
 		for (i = 0; i < 256; i += 4) {
@@ -9874,6 +9862,9 @@ static void __devinit tg3_read_partno(struct tg3 *tp)
 					break;
 				msleep(1);
 			}
+			if (!(tmp16 & 0x8000))
+				goto out_not_found;
+
 			pci_read_config_dword(tp->pdev, vpd_cap + PCI_VPD_DATA,
 					      &tmp);
 			tmp = cpu_to_le32(tmp);
@@ -9965,37 +9956,6 @@ static void __devinit tg3_read_fw_ver(struct tg3 *tp)
 	}
 }
 
-#ifdef CONFIG_SPARC64
-static int __devinit tg3_is_sun_570X(struct tg3 *tp)
-{
-	struct pci_dev *pdev = tp->pdev;
-	struct pcidev_cookie *pcp = pdev->sysdata;
-
-	if (pcp != NULL) {
-		int node = pcp->prom_node;
-		u32 venid;
-		int err;
-
-		err = prom_getproperty(node, "subsystem-vendor-id",
-				       (char *) &venid, sizeof(venid));
-		if (err == 0 || err == -1)
-			return 0;
-		if (venid == PCI_VENDOR_ID_SUN)
-			return 1;
-
-		/* TG3 chips onboard the SunBlade-2500 don't have the
-		 * subsystem-vendor-id set to PCI_VENDOR_ID_SUN but they
-		 * are distinguishable from non-Sun variants by being
-		 * named "network" by the firmware.  Non-Sun cards will
-		 * show up as being named "ethernet".
-		 */
-		if (!strcmp(pcp->prom_name, "network"))
-			return 1;
-	}
-	return 0;
-}
-#endif
-
 static int __devinit tg3_get_invariants(struct tg3 *tp)
 {
 	static struct pci_device_id write_reorder_chipsets[] = {
@@ -10012,11 +9972,6 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 	u16 pci_cmd;
 	int err;
 
-#ifdef CONFIG_SPARC64
-	if (tg3_is_sun_570X(tp))
-		tp->tg3_flags2 |= TG3_FLG2_SUN_570X;
-#endif
-
 	/* Force memory write invalidate off.  If we leave it on,
 	 * then on 5700_BX chips we have to enable a workaround.
 	 * The workaround is to set the TG3PCI_DMA_RW_CTRL boundary
@@ -10312,8 +10267,7 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 	if (tp->write32 == tg3_write_indirect_reg32 ||
 	    ((tp->tg3_flags & TG3_FLAG_PCIX_MODE) &&
 	     (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 ||
-	      GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701)) ||
-	    (tp->tg3_flags2 & TG3_FLG2_SUN_570X))
+	      GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701)))
 		tp->tg3_flags |= TG3_FLAG_SRAM_USE_CONFIG;
 
 	/* Get eeprom hw config before calling tg3_set_power_state().
@@ -10594,8 +10548,7 @@ static int __devinit tg3_get_device_address(struct tg3 *tp)
 #endif
 
 	mac_offset = 0x7c;
-	if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704 &&
-	     !(tp->tg3_flags & TG3_FLG2_SUN_570X)) ||
+	if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) ||
 	    (tp->tg3_flags2 & TG3_FLG2_5780_CLASS)) {
 		if (tr32(TG3PCI_DUAL_MAC_CTRL) & DUAL_MAC_CTRL_ID)
 			mac_offset = 0xcc;
@@ -10622,8 +10575,7 @@ static int __devinit tg3_get_device_address(struct tg3 *tp)
 	}
 	if (!addr_ok) {
 		/* Next, try NVRAM. */
-		if (!(tp->tg3_flags & TG3_FLG2_SUN_570X) &&
-		    !tg3_nvram_read(tp, mac_offset + 0, &hi) &&
+		if (!tg3_nvram_read(tp, mac_offset + 0, &hi) &&
 		    !tg3_nvram_read(tp, mac_offset + 4, &lo)) {
 			dev->dev_addr[0] = ((hi >> 16) & 0xff);
 			dev->dev_addr[1] = ((hi >> 24) & 0xff);
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index 0e29b885d449d..ff0faab94bd52 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -2184,7 +2184,7 @@ struct tg3 {
 #define TG3_FLAG_INIT_COMPLETE		0x80000000
 	u32				tg3_flags2;
 #define TG3_FLG2_RESTART_TIMER		0x00000001
-#define TG3_FLG2_SUN_570X		0x00000002
+/*					0x00000002 available */
 #define TG3_FLG2_NO_ETH_WIRE_SPEED	0x00000004
 #define TG3_FLG2_IS_5788		0x00000008
 #define TG3_FLG2_MAX_RXPEND_64		0x00000010
@@ -2216,6 +2216,7 @@ struct tg3 {
 #define TG3_FLG2_HW_TSO			(TG3_FLG2_HW_TSO_1 | TG3_FLG2_HW_TSO_2)
 #define TG3_FLG2_1SHOT_MSI		0x10000000
 #define TG3_FLG2_PHY_JITTER_BUG		0x20000000
+#define TG3_FLG2_NO_FWARE_REPORTED	0x40000000
 
 	u32				split_mode_max_reqs;
 #define SPLIT_MODE_5704_MAX_REQ		3
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index 1456759936c59..10e1a905c1444 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -285,9 +285,9 @@ static int pci_device_suspend(struct device * dev, pm_message_t state)
  * Default resume method for devices that have no driver provided resume,
  * or not even a driver at all.
  */
-static void pci_default_resume(struct pci_dev *pci_dev)
+static int pci_default_resume(struct pci_dev *pci_dev)
 {
-	int retval;
+	int retval = 0;
 
 	/* restore the PCI config space */
 	pci_restore_state(pci_dev);
@@ -297,18 +297,21 @@ static void pci_default_resume(struct pci_dev *pci_dev)
 	/* if the device was busmaster before the suspend, make it busmaster again */
 	if (pci_dev->is_busmaster)
 		pci_set_master(pci_dev);
+
+	return retval;
 }
 
 static int pci_device_resume(struct device * dev)
 {
+	int error;
 	struct pci_dev * pci_dev = to_pci_dev(dev);
 	struct pci_driver * drv = pci_dev->driver;
 
 	if (drv && drv->resume)
-		drv->resume(pci_dev);
+		error = drv->resume(pci_dev);
 	else
-		pci_default_resume(pci_dev);
-	return 0;
+		error = pci_default_resume(pci_dev);
+	return error;
 }
 
 static void pci_device_shutdown(struct device *dev)
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 8d107c6c2c70f..fde41cc147344 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -460,9 +460,23 @@ int
 pci_restore_state(struct pci_dev *dev)
 {
 	int i;
+	int val;
 
-	for (i = 0; i < 16; i++)
-		pci_write_config_dword(dev,i * 4, dev->saved_config_space[i]);
+	/*
+	 * The Base Address register should be programmed before the command
+	 * register(s)
+	 */
+	for (i = 15; i >= 0; i--) {
+		pci_read_config_dword(dev, i * 4, &val);
+		if (val != dev->saved_config_space[i]) {
+			printk(KERN_DEBUG "PM: Writing back config space on "
+				"device %s at offset %x (was %x, writing %x)\n",
+				pci_name(dev), i,
+				val, (int)dev->saved_config_space[i]);
+			pci_write_config_dword(dev,i * 4,
+				dev->saved_config_space[i]);
+		}
+	}
 	pci_restore_msi_state(dev);
 	pci_restore_msix_state(dev);
 	return 0;
diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c
index 9b8bca1ac1f01..f16f92a6ec0fe 100644
--- a/drivers/scsi/sata_mv.c
+++ b/drivers/scsi/sata_mv.c
@@ -2035,6 +2035,7 @@ static void mv_phy_reset(struct ata_port *ap)
 static void mv_eng_timeout(struct ata_port *ap)
 {
 	struct ata_queued_cmd *qc;
+	unsigned long flags;
 
 	printk(KERN_ERR "ata%u: Entering mv_eng_timeout\n",ap->id);
 	DPRINTK("All regs @ start of eng_timeout\n");
@@ -2046,8 +2047,10 @@ static void mv_eng_timeout(struct ata_port *ap)
 	       ap->host_set->mmio_base, ap, qc, qc->scsicmd,
 	       &qc->scsicmd->cmnd);
 
+	spin_lock_irqsave(&ap->host_set->lock, flags);
 	mv_err_intr(ap, 0);
 	mv_stop_and_reset(ap);
+	spin_unlock_irqrestore(&ap->host_set->lock, flags);
 
 	WARN_ON(!(qc->flags & ATA_QCFLAG_ACTIVE));
 	if (qc->flags & ATA_QCFLAG_ACTIVE) {
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index acde8868da21f..fafe7c1265b31 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -185,6 +185,9 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device
 	/* Select Power Management Mode */
 	pxa27x_ohci_select_pmm(inf->port_mode);
 
+	if (inf->power_budget)
+		hcd->power_budget = inf->power_budget;
+
 	ohci_hcd_init(hcd_to_ohci(hcd));
 
 	retval = usb_add_hcd(hcd, pdev->resource[1].start, SA_INTERRUPT);
diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c
index 953eb8c171d62..47ba1a79adcd3 100644
--- a/drivers/video/console/fbcon.c
+++ b/drivers/video/console/fbcon.c
@@ -1745,7 +1745,7 @@ static int fbcon_scroll(struct vc_data *vc, int t, int b, int dir,
 					fbcon_redraw_move(vc, p, 0, t, count);
 				ypan_up_redraw(vc, t, count);
 				if (vc->vc_rows - b > 0)
-					fbcon_redraw_move(vc, p, b - count,
+					fbcon_redraw_move(vc, p, b,
 							  vc->vc_rows - b, b);
 			} else
 				fbcon_redraw_move(vc, p, t + count, b - t - count, t);