diff options
| author | Michael Buesch <mb@bu3sch.de> | 2006-06-17 15:19:05 +0200 |
|---|---|---|
| committer | Jeff Garzik <jeff@garzik.org> | 2006-07-05 13:42:57 -0400 |
| commit | a1d79aaaa564abc19b7bf3a024bb371fa7648a15 (patch) | |
| tree | 95824af615a33102a058ebc2500416b31aafc7ec /drivers | |
| parent | e8d596972221aea55ae7f5c2bb7d5895039f664d (diff) | |
| download | linux-a1d79aaaa564abc19b7bf3a024bb371fa7648a15.tar.gz | |
[PATCH] bcm43xx: workaround init_board vs. IRQ race
Place the Init-vs-IRQ workaround before any card register
access, because we might not have the wireless core mapped
at all times in init. So this will result in a Machine Check
caused by a bus error.
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/net/wireless/bcm43xx/bcm43xx_main.c | 27 |
1 files changed, 14 insertions, 13 deletions
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_main.c b/drivers/net/wireless/bcm43xx/bcm43xx_main.c index d8f5600578b492..673ab11d92abc6 100644 --- a/drivers/net/wireless/bcm43xx/bcm43xx_main.c +++ b/drivers/net/wireless/bcm43xx/bcm43xx_main.c @@ -1885,6 +1885,15 @@ static irqreturn_t bcm43xx_interrupt_handler(int irq, void *dev_id, struct pt_re spin_lock(&bcm->irq_lock); + /* Only accept IRQs, if we are initialized properly. + * This avoids an RX race while initializing. + * We should probably not enable IRQs before we are initialized + * completely, but some careful work is needed to fix this. I think it + * is best to stay with this cheap workaround for now... . + */ + if (unlikely(bcm43xx_status(bcm) != BCM43xx_STAT_INITIALIZED)) + goto out; + reason = bcm43xx_read32(bcm, BCM43xx_MMIO_GEN_IRQ_REASON); if (reason == 0xffffffff) { /* irq not for us (shared irq) */ @@ -1906,19 +1915,11 @@ static irqreturn_t bcm43xx_interrupt_handler(int irq, void *dev_id, struct pt_re bcm43xx_interrupt_ack(bcm, reason); - /* Only accept IRQs, if we are initialized properly. - * This avoids an RX race while initializing. - * We should probably not enable IRQs before we are initialized - * completely, but some careful work is needed to fix this. I think it - * is best to stay with this cheap workaround for now... . - */ - if (likely(bcm43xx_status(bcm) == BCM43xx_STAT_INITIALIZED)) { - /* disable all IRQs. They are enabled again in the bottom half. */ - bcm->irq_savedstate = bcm43xx_interrupt_disable(bcm, BCM43xx_IRQ_ALL); - /* save the reason code and call our bottom half. */ - bcm->irq_reason = reason; - tasklet_schedule(&bcm->isr_tasklet); - } + /* disable all IRQs. They are enabled again in the bottom half. */ + bcm->irq_savedstate = bcm43xx_interrupt_disable(bcm, BCM43xx_IRQ_ALL); + /* save the reason code and call our bottom half. */ + bcm->irq_reason = reason; + tasklet_schedule(&bcm->isr_tasklet); out: mmiowb(); |