[PATCH] spi: use linked lists rather than an array

This makes the SPI core and its users access transfers in the SPI message
structure as linked list not as an array, as discussed on LKML.

From: David Brownell <dbrownell@users.sourceforge.net>

  Updates including doc, bugfixes to the list code, add
  spi_message_add_tail().  Plus, initialize things _before_ grabbing the
  locks in some cases (in case it grows more expensive).  This also merges
  some bitbang updates of mine that didn't yet make it into the mm tree.

Signed-off-by: Vitaly Wool <vwool@ru.mvista.com>
Signed-off-by: Dmitry Pervushin <dpervushin@gmail.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

5 files changed, 110 insertions, 84 deletions

diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index c741776ef3bf88..dd8c6a9ffc762a 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -155,10 +155,13 @@ static int ads7846_read12_ser(struct device *dev, unsigned command)
 	struct ser_req		*req = kzalloc(sizeof *req, SLAB_KERNEL);
 	int			status;
 	int			sample;
+	int 			i;
 
 	if (!req)
 		return -ENOMEM;
 
+	INIT_LIST_HEAD(&req->msg.transfers);
+
 	/* activate reference, so it has time to settle; */
 	req->xfer[0].tx_buf = &ref_on;
 	req->xfer[0].len = 1;
@@ -192,8 +195,8 @@ static int ads7846_read12_ser(struct device *dev, unsigned command)
 	/* group all the transfers together, so we can't interfere with
 	 * reading touchscreen state; disable penirq while sampling
 	 */
-	req->msg.transfers = req->xfer;
-	req->msg.n_transfer = 6;
+	for (i = 0; i < 6; i++)
+		spi_message_add_tail(&req->xfer[i], &req->msg);
 
 	disable_irq(spi->irq);
 	status = spi_sync(spi, &req->msg);
@@ -398,6 +401,7 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 	struct ads7846			*ts;
 	struct ads7846_platform_data	*pdata = spi->dev.platform_data;
 	struct spi_transfer		*x;
+	int				i;
 
 	if (!spi->irq) {
 		dev_dbg(&spi->dev, "no IRQ?\n");
@@ -500,8 +504,8 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 
 	CS_CHANGE(x[-1]);
 
-	ts->msg.transfers = ts->xfer;
-	ts->msg.n_transfer = x - ts->xfer;
+	for (i = 0; i < x - ts->xfer; i++)
+		spi_message_add_tail(&ts->xfer[i], &ts->msg);
 	ts->msg.complete = ads7846_rx;
 	ts->msg.context = ts;
 
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index 71a072103a7f98..45108ed85588ba 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -245,6 +245,21 @@ static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len,
 	if (from + len > flash->mtd.size)
 		return -EINVAL;
 
+	spi_message_init(&m);
+	memset(t, 0, (sizeof t));
+
+	t[0].tx_buf = flash->command;
+	t[0].len = sizeof(flash->command);
+	spi_message_add_tail(&t[0], &m);
+
+	t[1].rx_buf = buf;
+	t[1].len = len;
+	spi_message_add_tail(&t[1], &m);
+
+	/* Byte count starts at zero. */
+	if (retlen)
+		*retlen = 0;
+
 	down(&flash->lock);
 
 	/* Wait till previous write/erase is done. */
@@ -254,8 +269,6 @@ static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len,
 		return 1;
 	}
 
-	memset(t, 0, (sizeof t));
-
 	/* NOTE:  OPCODE_FAST_READ (if available) is faster... */
 
 	/* Set up the write data buffer. */
@@ -264,19 +277,6 @@ static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len,
 	flash->command[2] = from >> 8;
 	flash->command[3] = from;
 
-	/* Byte count starts at zero. */
-	if (retlen)
-		*retlen = 0;
-
-	t[0].tx_buf = flash->command;
-	t[0].len = sizeof(flash->command);
-
-	t[1].rx_buf = buf;
-	t[1].len = len;
-
-	m.transfers = t;
-	m.n_transfer = 2;
-
 	spi_sync(flash->spi, &m);
 
 	*retlen = m.actual_length - sizeof(flash->command);
@@ -313,6 +313,16 @@ static int m25p80_write(struct mtd_info *mtd, loff_t to, size_t len,
 	if (to + len > flash->mtd.size)
 		return -EINVAL;
 
+	spi_message_init(&m);
+	memset(t, 0, (sizeof t));
+
+	t[0].tx_buf = flash->command;
+	t[0].len = sizeof(flash->command);
+	spi_message_add_tail(&t[0], &m);
+
+	t[1].tx_buf = buf;
+	spi_message_add_tail(&t[1], &m);
+
   	down(&flash->lock);
 
 	/* Wait until finished previous write command. */
@@ -321,26 +331,17 @@ static int m25p80_write(struct mtd_info *mtd, loff_t to, size_t len,
 
 	write_enable(flash);
 
-	memset(t, 0, (sizeof t));
-
 	/* Set up the opcode in the write buffer. */
 	flash->command[0] = OPCODE_PP;
 	flash->command[1] = to >> 16;
 	flash->command[2] = to >> 8;
 	flash->command[3] = to;
 
-	t[0].tx_buf = flash->command;
-	t[0].len = sizeof(flash->command);
-
-	m.transfers = t;
-	m.n_transfer = 2;
-
 	/* what page do we start with? */
 	page_offset = to % FLASH_PAGESIZE;
 
 	/* do all the bytes fit onto one page? */
 	if (page_offset + len <= FLASH_PAGESIZE) {
-		t[1].tx_buf = buf;
 		t[1].len = len;
 
 		spi_sync(flash->spi, &m);
@@ -352,7 +353,6 @@ static int m25p80_write(struct mtd_info *mtd, loff_t to, size_t len,
 		/* the size of data remaining on the first page */
 		page_size = FLASH_PAGESIZE - page_offset;
 
-		t[1].tx_buf = buf;
 		t[1].len = page_size;
 		spi_sync(flash->spi, &m);
 
diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c
index a39b3b6b266c07..99d3a0320fc9cd 100644
--- a/drivers/mtd/devices/mtd_dataflash.c
+++ b/drivers/mtd/devices/mtd_dataflash.c
@@ -147,7 +147,7 @@ static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr)
 {
 	struct dataflash	*priv = (struct dataflash *)mtd->priv;
 	struct spi_device	*spi = priv->spi;
-	struct spi_transfer	x[1] = { { .tx_dma = 0, }, };
+	struct spi_transfer	x = { .tx_dma = 0, };
 	struct spi_message	msg;
 	unsigned		blocksize = priv->page_size << 3;
 	u8			*command;
@@ -162,10 +162,11 @@ static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr)
 			|| (instr->addr % priv->page_size) != 0)
 		return -EINVAL;
 
-	x[0].tx_buf = command = priv->command;
-	x[0].len = 4;
-	msg.transfers = x;
-	msg.n_transfer = 1;
+	spi_message_init(&msg);
+
+	x.tx_buf = command = priv->command;
+	x.len = 4;
+	spi_message_add_tail(&x, &msg);
 
 	down(&priv->lock);
 	while (instr->len > 0) {
@@ -256,12 +257,15 @@ static int dataflash_read(struct mtd_info *mtd, loff_t from, size_t len,
 	DEBUG(MTD_DEBUG_LEVEL3, "READ: (%x) %x %x %x\n",
 		command[0], command[1], command[2], command[3]);
 
+	spi_message_init(&msg);
+
 	x[0].tx_buf = command;
 	x[0].len = 8;
+	spi_message_add_tail(&x[0], &msg);
+
 	x[1].rx_buf = buf;
 	x[1].len = len;
-	msg.transfers = x;
-	msg.n_transfer = 2;
+	spi_message_add_tail(&x[1], &msg);
 
 	down(&priv->lock);
 
@@ -320,9 +324,11 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len,
 	if ((to + len) > mtd->size)
 		return -EINVAL;
 
+	spi_message_init(&msg);
+
 	x[0].tx_buf = command = priv->command;
 	x[0].len = 4;
-	msg.transfers = x;
+	spi_message_add_tail(&x[0], &msg);
 
 	pageaddr = ((unsigned)to / priv->page_size);
 	offset = ((unsigned)to % priv->page_size);
@@ -364,7 +370,6 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len,
 			DEBUG(MTD_DEBUG_LEVEL3, "TRANSFER: (%x) %x %x %x\n",
 				command[0], command[1], command[2], command[3]);
 
-			msg.n_transfer = 1;
 			status = spi_sync(spi, &msg);
 			if (status < 0)
 				DEBUG(MTD_DEBUG_LEVEL1, "%s: xfer %u -> %d \n",
@@ -385,14 +390,16 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len,
 
 		x[1].tx_buf = writebuf;
 		x[1].len = writelen;
-		msg.n_transfer = 2;
+		spi_message_add_tail(x + 1, &msg);
 		status = spi_sync(spi, &msg);
+		spi_transfer_del(x + 1);
 		if (status < 0)
 			DEBUG(MTD_DEBUG_LEVEL1, "%s: pgm %u/%u -> %d \n",
 				spi->dev.bus_id, addr, writelen, status);
 
 		(void) dataflash_waitready(priv->spi);
 
+
 #ifdef	CONFIG_DATAFLASH_WRITE_VERIFY
 
 		/* (3) Compare to Buffer1 */
@@ -405,7 +412,6 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len,
 		DEBUG(MTD_DEBUG_LEVEL3, "COMPARE: (%x) %x %x %x\n",
 			command[0], command[1], command[2], command[3]);
 
-		msg.n_transfer = 1;
 		status = spi_sync(spi, &msg);
 		if (status < 0)
 			DEBUG(MTD_DEBUG_LEVEL1, "%s: compare %u -> %d \n",
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 3ecedccdb96cc7..cdb242de901d1c 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -557,6 +557,17 @@ int spi_write_then_read(struct spi_device *spi,
 	if ((n_tx + n_rx) > SPI_BUFSIZ)
 		return -EINVAL;
 
+	spi_message_init(&message);
+	memset(x, 0, sizeof x);
+	if (n_tx) {
+		x[0].len = n_tx;
+		spi_message_add_tail(&x[0], &message);
+	}
+	if (n_rx) {
+		x[1].len = n_rx;
+		spi_message_add_tail(&x[1], &message);
+	}
+
 	/* ... unless someone else is using the pre-allocated buffer */
 	if (down_trylock(&lock)) {
 		local_buf = kmalloc(SPI_BUFSIZ, GFP_KERNEL);
@@ -565,18 +576,11 @@ int spi_write_then_read(struct spi_device *spi,
 	} else
 		local_buf = buf;
 
-	memset(x, 0, sizeof x);
-
 	memcpy(local_buf, txbuf, n_tx);
 	x[0].tx_buf = local_buf;
-	x[0].len = n_tx;
-
 	x[1].rx_buf = local_buf + n_tx;
-	x[1].len = n_rx;
 
 	/* do the i/o */
-	message.transfers = x;
-	message.n_transfer = ARRAY_SIZE(x);
 	status = spi_sync(spi, &message);
 	if (status == 0) {
 		memcpy(rxbuf, x[1].rx_buf, n_rx);
diff --git a/drivers/spi/spi_bitbang.c b/drivers/spi/spi_bitbang.c
index 44aff198eb9605..f037e5593269e8 100644
--- a/drivers/spi/spi_bitbang.c
+++ b/drivers/spi/spi_bitbang.c
@@ -146,6 +146,9 @@ int spi_bitbang_setup(struct spi_device *spi)
 	struct spi_bitbang_cs	*cs = spi->controller_state;
 	struct spi_bitbang	*bitbang;
 
+	if (!spi->max_speed_hz)
+		return -EINVAL;
+
 	if (!cs) {
 		cs = kzalloc(sizeof *cs, SLAB_KERNEL);
 		if (!cs)
@@ -172,13 +175,8 @@ int spi_bitbang_setup(struct spi_device *spi)
 	if (!cs->txrx_word)
 		return -EINVAL;
 
-	if (!spi->max_speed_hz)
-		spi->max_speed_hz = 500 * 1000;
-
-	/* nsecs = max(50, (clock period)/2), be optimistic */
+	/* nsecs = (clock period)/2 */
 	cs->nsecs = (1000000000/2) / (spi->max_speed_hz);
-	if (cs->nsecs < 50)
-		cs->nsecs = 50;
 	if (cs->nsecs > MAX_UDELAY_MS * 1000)
 		return -EINVAL;
 
@@ -194,7 +192,7 @@ int spi_bitbang_setup(struct spi_device *spi)
 	/* deselect chip (low or high) */
 	spin_lock(&bitbang->lock);
 	if (!bitbang->busy) {
-		bitbang->chipselect(spi, 0);
+		bitbang->chipselect(spi, BITBANG_CS_INACTIVE);
 		ndelay(cs->nsecs);
 	}
 	spin_unlock(&bitbang->lock);
@@ -244,9 +242,9 @@ static void bitbang_work(void *_bitbang)
 		struct spi_message	*m;
 		struct spi_device	*spi;
 		unsigned		nsecs;
-		struct spi_transfer	*t;
+		struct spi_transfer	*t = NULL;
 		unsigned		tmp;
-		unsigned		chipselect;
+		unsigned		cs_change;
 		int			status;
 
 		m = container_of(bitbang->queue.next, struct spi_message,
@@ -254,37 +252,49 @@ static void bitbang_work(void *_bitbang)
 		list_del_init(&m->queue);
 		spin_unlock_irqrestore(&bitbang->lock, flags);
 
-// FIXME this is made-up
-nsecs = 100;
+		/* FIXME this is made-up ... the correct value is known to
+		 * word-at-a-time bitbang code, and presumably chipselect()
+		 * should enforce these requirements too?
+		 */
+		nsecs = 100;
 
 		spi = m->spi;
-		t = m->transfers;
 		tmp = 0;
-		chipselect = 0;
+		cs_change = 1;
 		status = 0;
 
-		for (;;t++) {
+		list_for_each_entry (t, &m->transfers, transfer_list) {
 			if (bitbang->shutdown) {
 				status = -ESHUTDOWN;
 				break;
 			}
 
-			/* set up default clock polarity, and activate chip */
-			if (!chipselect) {
-				bitbang->chipselect(spi, 1);
+			/* set up default clock polarity, and activate chip;
+			 * this implicitly updates clock and spi modes as
+			 * previously recorded for this device via setup().
+			 * (and also deselects any other chip that might be
+			 * selected ...)
+			 */
+			if (cs_change) {
+				bitbang->chipselect(spi, BITBANG_CS_ACTIVE);
 				ndelay(nsecs);
 			}
+			cs_change = t->cs_change;
 			if (!t->tx_buf && !t->rx_buf && t->len) {
 				status = -EINVAL;
 				break;
 			}
 
-			/* transfer data */
+			/* transfer data.  the lower level code handles any
+			 * new dma mappings it needs. our caller always gave
+			 * us dma-safe buffers.
+			 */
 			if (t->len) {
-				/* FIXME if bitbang->use_dma, dma_map_single()
-				 * before the transfer, and dma_unmap_single()
-				 * afterwards, for either or both buffers...
+				/* REVISIT dma API still needs a designated
+				 * DMA_ADDR_INVALID; ~0 might be better.
 				 */
+				if (!m->is_dma_mapped)
+					t->rx_dma = t->tx_dma = 0;
 				status = bitbang->txrx_bufs(spi, t);
 			}
 			if (status != t->len) {
@@ -299,29 +309,31 @@ nsecs = 100;
 			if (t->delay_usecs)
 				udelay(t->delay_usecs);
 
-			tmp++;
-			if (tmp >= m->n_transfer)
-				break;
-
-			chipselect = !t->cs_change;
-			if (chipselect);
+			if (!cs_change)
 				continue;
+			if (t->transfer_list.next == &m->transfers)
+				break;
 
-			bitbang->chipselect(spi, 0);
-
-			/* REVISIT do we want the udelay here instead? */
-			msleep(1);
+			/* sometimes a short mid-message deselect of the chip
+			 * may be needed to terminate a mode or command
+			 */
+			ndelay(nsecs);
+			bitbang->chipselect(spi, BITBANG_CS_INACTIVE);
+			ndelay(nsecs);
 		}
 
-		tmp = m->n_transfer - 1;
-		tmp = m->transfers[tmp].cs_change;
-
 		m->status = status;
 		m->complete(m->context);
 
-		ndelay(2 * nsecs);
-		bitbang->chipselect(spi, status == 0 && tmp);
-		ndelay(nsecs);
+		/* normally deactivate chipselect ... unless no error and
+		 * cs_change has hinted that the next message will probably
+		 * be for this chip too.
+		 */
+		if (!(status == 0 && cs_change)) {
+			ndelay(nsecs);
+			bitbang->chipselect(spi, BITBANG_CS_INACTIVE);
+			ndelay(nsecs);
+		}
 
 		spin_lock_irqsave(&bitbang->lock, flags);
 	}