[SCSI] mptspi: reset handler shouldn't be called for other bus protocols

All registered reset callback handlers are called during reset processing.
The mptspi modules has its own reset callback handler, just recently
added for issuing domain validation after host reset.  If either the mptsas or
mptfc driver are loaded, this callback could be called. Thus resulting
in domain validation being issued for sas or fibre end devices.

Fix this by having mptbase.c check the bus type against the driver
type and only call the reset handler if they match (or if it's a
non-bus specific reset handler).

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

1 files changed, 21 insertions, 6 deletions

diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index 9080853fe28355..a30084076ac888 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -1605,6 +1605,21 @@ mpt_resume(struct pci_dev *pdev)
 }
 #endif
 
+static int
+mpt_signal_reset(int index, MPT_ADAPTER *ioc, int reset_phase)
+{
+	if ((MptDriverClass[index] == MPTSPI_DRIVER &&
+	     ioc->bus_type != SPI) ||
+	    (MptDriverClass[index] == MPTFC_DRIVER &&
+	     ioc->bus_type != FC) ||
+	    (MptDriverClass[index] == MPTSAS_DRIVER &&
+	     ioc->bus_type != SAS))
+		/* make sure we only call the relevant reset handler
+		 * for the bus */
+		return 0;
+	return (MptResetHandlers[index])(ioc, reset_phase);
+}
+
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /*
  *	mpt_do_ioc_recovery - Initialize or recover MPT adapter.
@@ -1885,14 +1900,14 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
 			if ((ret == 0) && MptResetHandlers[ii]) {
 				dprintk((MYIOC_s_INFO_FMT "Calling IOC post_reset handler #%d\n",
 						ioc->name, ii));
-				rc += (*(MptResetHandlers[ii]))(ioc, MPT_IOC_POST_RESET);
+				rc += mpt_signal_reset(ii, ioc, MPT_IOC_POST_RESET);
 				handlers++;
 			}
 
 			if (alt_ioc_ready && MptResetHandlers[ii]) {
 				drsprintk((MYIOC_s_INFO_FMT "Calling alt-%s post_reset handler #%d\n",
 						ioc->name, ioc->alt_ioc->name, ii));
-				rc += (*(MptResetHandlers[ii]))(ioc->alt_ioc, MPT_IOC_POST_RESET);
+				rc += mpt_signal_reset(ii, ioc->alt_ioc, MPT_IOC_POST_RESET);
 				handlers++;
 			}
 		}
@@ -3267,11 +3282,11 @@ mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag)
 				if (MptResetHandlers[ii]) {
 					dprintk((MYIOC_s_INFO_FMT "Calling IOC pre_reset handler #%d\n",
 							ioc->name, ii));
-					r += (*(MptResetHandlers[ii]))(ioc, MPT_IOC_PRE_RESET);
+					r += mpt_signal_reset(ii, ioc, MPT_IOC_PRE_RESET);
 					if (ioc->alt_ioc) {
 						dprintk((MYIOC_s_INFO_FMT "Calling alt-%s pre_reset handler #%d\n",
 								ioc->name, ioc->alt_ioc->name, ii));
-						r += (*(MptResetHandlers[ii]))(ioc->alt_ioc, MPT_IOC_PRE_RESET);
+						r += mpt_signal_reset(ii, ioc->alt_ioc, MPT_IOC_PRE_RESET);
 					}
 				}
 			}
@@ -5706,11 +5721,11 @@ mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
 			if (MptResetHandlers[ii]) {
 				dtmprintk((MYIOC_s_INFO_FMT "Calling IOC reset_setup handler #%d\n",
 						ioc->name, ii));
-				r += (*(MptResetHandlers[ii]))(ioc, MPT_IOC_SETUP_RESET);
+				r += mpt_signal_reset(ii, ioc, MPT_IOC_SETUP_RESET);
 				if (ioc->alt_ioc) {
 					dtmprintk((MYIOC_s_INFO_FMT "Calling alt-%s setup reset handler #%d\n",
 							ioc->name, ioc->alt_ioc->name, ii));
-					r += (*(MptResetHandlers[ii]))(ioc->alt_ioc, MPT_IOC_SETUP_RESET);
+					r += mpt_signal_reset(ii, ioc->alt_ioc, MPT_IOC_SETUP_RESET);
 				}
 			}
 		}