Merge tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC boardfile updates from Arnd Bergmann
 "Unused boardfile removal for 6.3

  This is a follow-up to the deprecation of most of the old-style board
  files that was merged in linux-6.0, removing them for good.

  This branch is almost exclusively dead code removal based on those
  annotations. Some device driver removals went through separate
  subsystem trees, but the majority is in the same branch, in order to
  better handle dependencies between the patches and avoid breaking
  bisection.

  Unfortunately that leads to merge conflicts against other changes in
  the subsystem trees, but they should all be trivial to resolve by
  removing the files.

  See commit 7d0d3fa7339e ("Merge tag 'arm-boardfiles-6.0' of
  git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc") for the
  description of which machines were marked unused and are now removed.

  The only removals that got postponed are Terastation WXL (mv78xx0) and
  Jornada720 (StrongARM1100), which turned out to still have potential
  users"

* tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (91 commits)
  mmc: omap: drop TPS65010 dependency
  ARM: pxa: restore mfp-pxa320.h
  usb: ohci-omap: avoid unused-variable warning
  ARM: debug: remove references in DEBUG_UART_8250_SHIFT to removed configs
  ARM: s3c: remove obsolete s3c-cpu-freq header
  MAINTAINERS: adjust SAMSUNG SOC CLOCK DRIVERS after s3c24xx support removal
  MAINTAINERS: update file entries after arm multi-platform rework and mach-pxa removal
  ARM: remove CONFIG_UNUSED_BOARD_FILES
  mfd: remove htc-pasic3 driver
  w1: remove ds1wm driver
  usb: remove ohci-tmio driver
  fbdev: remove w100fb driver
  fbdev: remove tmiofb driver
  mmc: remove tmio_mmc driver
  mfd: remove ucb1400 support
  mfd: remove toshiba tmio drivers
  rtc: remove v3020 driver
  power: remove pda_power supply driver
  ASoC: pxa: remove unused board support
  pcmcia: remove unused pxa/sa1100 drivers
  ...

3 files changed, 7 insertions, 88 deletions

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 0bc40b763b065..5de74686f12b0 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -491,14 +491,13 @@ config IXP4XX_WATCHDOG
 	  Say N if you are unsure.
 
 config S3C2410_WATCHDOG
-	tristate "S3C2410 Watchdog"
-	depends on ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210 || ARCH_EXYNOS || \
-		   COMPILE_TEST
+	tristate "S3C6410/S5Pv210/Exynos Watchdog"
+	depends on ARCH_S3C64XX || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
 	select WATCHDOG_CORE
 	select MFD_SYSCON if ARCH_EXYNOS
 	help
-	  Watchdog timer block in the Samsung S3C24xx, S3C64xx, S5Pv210 and
-	  Exynos SoCs. This will reboot the system when the timer expires with
+	  Watchdog timer block in the Samsung S3C64xx, S5Pv210 and Exynos
+	  SoCs. This will reboot the system when the timer expires with
 	  the watchdog enabled.
 
 	  The driver is limited by the speed of the system's PCLK
diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
index d3fc8ed886fff..200ba236a72eb 100644
--- a/drivers/watchdog/s3c2410_wdt.c
+++ b/drivers/watchdog/s3c2410_wdt.c
@@ -562,73 +562,6 @@ static irqreturn_t s3c2410wdt_irq(int irqno, void *param)
 	return IRQ_HANDLED;
 }
 
-#ifdef CONFIG_ARM_S3C24XX_CPUFREQ
-
-static int s3c2410wdt_cpufreq_transition(struct notifier_block *nb,
-					  unsigned long val, void *data)
-{
-	int ret;
-	struct s3c2410_wdt *wdt = freq_to_wdt(nb);
-
-	if (!s3c2410wdt_is_running(wdt))
-		goto done;
-
-	if (val == CPUFREQ_PRECHANGE) {
-		/* To ensure that over the change we don't cause the
-		 * watchdog to trigger, we perform an keep-alive if
-		 * the watchdog is running.
-		 */
-
-		s3c2410wdt_keepalive(&wdt->wdt_device);
-	} else if (val == CPUFREQ_POSTCHANGE) {
-		s3c2410wdt_stop(&wdt->wdt_device);
-
-		ret = s3c2410wdt_set_heartbeat(&wdt->wdt_device,
-						wdt->wdt_device.timeout);
-
-		if (ret >= 0)
-			s3c2410wdt_start(&wdt->wdt_device);
-		else
-			goto err;
-	}
-
-done:
-	return 0;
-
- err:
-	dev_err(wdt->dev, "cannot set new value for timeout %d\n",
-				wdt->wdt_device.timeout);
-	return ret;
-}
-
-static inline int s3c2410wdt_cpufreq_register(struct s3c2410_wdt *wdt)
-{
-	wdt->freq_transition.notifier_call = s3c2410wdt_cpufreq_transition;
-
-	return cpufreq_register_notifier(&wdt->freq_transition,
-					 CPUFREQ_TRANSITION_NOTIFIER);
-}
-
-static inline void s3c2410wdt_cpufreq_deregister(struct s3c2410_wdt *wdt)
-{
-	wdt->freq_transition.notifier_call = s3c2410wdt_cpufreq_transition;
-
-	cpufreq_unregister_notifier(&wdt->freq_transition,
-				    CPUFREQ_TRANSITION_NOTIFIER);
-}
-
-#else
-
-static inline int s3c2410wdt_cpufreq_register(struct s3c2410_wdt *wdt)
-{
-	return 0;
-}
-
-static inline void s3c2410wdt_cpufreq_deregister(struct s3c2410_wdt *wdt)
-{
-}
-#endif
-
 static inline unsigned int s3c2410wdt_get_bootstatus(struct s3c2410_wdt *wdt)
 {
 	unsigned int rst_stat;
@@ -761,12 +694,6 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
 	wdt->wdt_device.min_timeout = 1;
 	wdt->wdt_device.max_timeout = s3c2410wdt_max_timeout(wdt);
 
-	ret = s3c2410wdt_cpufreq_register(wdt);
-	if (ret < 0) {
-		dev_err(dev, "failed to register cpufreq\n");
-		goto err_src_clk;
-	}
-
 	watchdog_set_drvdata(&wdt->wdt_device, wdt);
 
 	/* see if we can actually set the requested timer margin, and if
@@ -783,7 +710,7 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
 				 S3C2410_WATCHDOG_DEFAULT_TIME);
 		} else {
 			dev_err(dev, "failed to use default timeout\n");
-			goto err_cpufreq;
+			goto err_src_clk;
 		}
 	}
 
@@ -791,7 +718,7 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
 			       pdev->name, pdev);
 	if (ret != 0) {
 		dev_err(dev, "failed to install irq (%d)\n", ret);
-		goto err_cpufreq;
+		goto err_src_clk;
 	}
 
 	watchdog_set_nowayout(&wdt->wdt_device, nowayout);
@@ -817,7 +744,7 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
 
 	ret = watchdog_register_device(&wdt->wdt_device);
 	if (ret)
-		goto err_cpufreq;
+		goto err_src_clk;
 
 	ret = s3c2410wdt_enable(wdt, true);
 	if (ret < 0)
@@ -839,9 +766,6 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
  err_unregister:
 	watchdog_unregister_device(&wdt->wdt_device);
 
- err_cpufreq:
-	s3c2410wdt_cpufreq_deregister(wdt);
-
  err_src_clk:
 	clk_disable_unprepare(wdt->src_clk);
 
@@ -862,8 +786,6 @@ static int s3c2410wdt_remove(struct platform_device *dev)
 
 	watchdog_unregister_device(&wdt->wdt_device);
 
-	s3c2410wdt_cpufreq_deregister(wdt);
-
 	clk_disable_unprepare(wdt->src_clk);
 	clk_disable_unprepare(wdt->bus_clk);
 
diff --git a/drivers/watchdog/wdt285.c b/drivers/watchdog/wdt285.c
index 110249e5f6428..5b7be7a62d54e 100644
--- a/drivers/watchdog/wdt285.c
+++ b/drivers/watchdog/wdt285.c
@@ -206,8 +206,6 @@ static int __init footbridge_watchdog_init(void)
 	pr_info("Footbridge Watchdog Timer: 0.01, timer margin: %d sec\n",
 		soft_margin);
 
-	if (machine_is_cats())
-		pr_warn("Warning: Watchdog reset may not work on this machine\n");
 	return 0;
 }