USB: serial: ti_usb_3410_5052.c: remove dbg() usage

dbg() was a very old USB-serial-specific macro.
This patch removes it from being used in the
driver and uses dev_dbg() instead.

CC: Johan Hovold <jhovold@gmail.com>
CC: Rusty Russell <rusty@rustcorp.com.au>
CC: Adhir Ramjiawan <adhirramjiawan0@gmail.com>
CC: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 64 insertions, 65 deletions

diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index a4404f5ad68ec..0b113fa48eed5 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -141,8 +141,8 @@ static int ti_command_out_sync(struct ti_device *tdev, __u8 command,
 static int ti_command_in_sync(struct ti_device *tdev, __u8 command,
 	__u16 moduleid, __u16 value, __u8 *data, int size);
 
-static int ti_write_byte(struct ti_device *tdev, unsigned long addr,
-	__u8 mask, __u8 byte);
+static int ti_write_byte(struct usb_serial_port *port, struct ti_device *tdev,
+			 unsigned long addr, __u8 mask, __u8 byte);
 
 static int ti_download_firmware(struct ti_device *tdev);
 
@@ -364,10 +364,11 @@ static int ti_startup(struct usb_serial *serial)
 	int i;
 
 
-	dbg("%s - product 0x%4X, num configurations %d, configuration value %d",
-	    __func__, le16_to_cpu(dev->descriptor.idProduct),
-	    dev->descriptor.bNumConfigurations,
-	    dev->actconfig->desc.bConfigurationValue);
+	dev_dbg(&dev->dev,
+		"%s - product 0x%4X, num configurations %d, configuration value %d",
+		__func__, le16_to_cpu(dev->descriptor.idProduct),
+		dev->descriptor.bNumConfigurations,
+		dev->actconfig->desc.bConfigurationValue);
 
 	/* create device structure */
 	tdev = kzalloc(sizeof(struct ti_device), GFP_KERNEL);
@@ -382,8 +383,8 @@ static int ti_startup(struct usb_serial *serial)
 	/* determine device type */
 	if (usb_match_id(serial->interface, ti_id_table_3410))
 		tdev->td_is_3410 = 1;
-	dbg("%s - device type is %s", __func__,
-				tdev->td_is_3410 ? "3410" : "5052");
+	dev_dbg(&dev->dev, "%s - device type is %s\n", __func__,
+		tdev->td_is_3410 ? "3410" : "5052");
 
 	/* if we have only 1 configuration, download firmware */
 	if (dev->descriptor.bNumConfigurations == 1) {
@@ -501,20 +502,17 @@ static int ti_open(struct tty_struct *tty, struct usb_serial_port *port)
 
 	/* start interrupt urb the first time a port is opened on this device */
 	if (tdev->td_open_port_count == 0) {
-		dbg("%s - start interrupt in urb", __func__);
+		dev_dbg(&port->dev, "%s - start interrupt in urb\n", __func__);
 		urb = tdev->td_serial->port[0]->interrupt_in_urb;
 		if (!urb) {
-			dev_err(&port->dev, "%s - no interrupt urb\n",
-								__func__);
+			dev_err(&port->dev, "%s - no interrupt urb\n", __func__);
 			status = -EINVAL;
 			goto release_lock;
 		}
 		urb->context = tdev;
 		status = usb_submit_urb(urb, GFP_KERNEL);
 		if (status) {
-			dev_err(&port->dev,
-				"%s - submit interrupt urb failed, %d\n",
-					__func__, status);
+			dev_err(&port->dev, "%s - submit interrupt urb failed, %d\n", __func__, status);
 			goto release_lock;
 		}
 	}
@@ -522,16 +520,16 @@ static int ti_open(struct tty_struct *tty, struct usb_serial_port *port)
 	if (tty)
 		ti_set_termios(tty, port, tty->termios);
 
-	dbg("%s - sending TI_OPEN_PORT", __func__);
+	dev_dbg(&port->dev, "%s - sending TI_OPEN_PORT\n", __func__);
 	status = ti_command_out_sync(tdev, TI_OPEN_PORT,
 		(__u8)(TI_UART1_PORT + port_number), open_settings, NULL, 0);
 	if (status) {
 		dev_err(&port->dev, "%s - cannot send open command, %d\n",
-							__func__, status);
+			__func__, status);
 		goto unlink_int_urb;
 	}
 
-	dbg("%s - sending TI_START_PORT", __func__);
+	dev_dbg(&port->dev, "%s - sending TI_START_PORT\n", __func__);
 	status = ti_command_out_sync(tdev, TI_START_PORT,
 		(__u8)(TI_UART1_PORT + port_number), 0, NULL, 0);
 	if (status) {
@@ -540,7 +538,7 @@ static int ti_open(struct tty_struct *tty, struct usb_serial_port *port)
 		goto unlink_int_urb;
 	}
 
-	dbg("%s - sending TI_PURGE_PORT", __func__);
+	dev_dbg(&port->dev, "%s - sending TI_PURGE_PORT\n", __func__);
 	status = ti_command_out_sync(tdev, TI_PURGE_PORT,
 		(__u8)(TI_UART1_PORT + port_number), TI_PURGE_INPUT, NULL, 0);
 	if (status) {
@@ -564,7 +562,7 @@ static int ti_open(struct tty_struct *tty, struct usb_serial_port *port)
 	if (tty)
 		ti_set_termios(tty, port, tty->termios);
 
-	dbg("%s - sending TI_OPEN_PORT (2)", __func__);
+	dev_dbg(&port->dev, "%s - sending TI_OPEN_PORT (2)\n", __func__);
 	status = ti_command_out_sync(tdev, TI_OPEN_PORT,
 		(__u8)(TI_UART1_PORT + port_number), open_settings, NULL, 0);
 	if (status) {
@@ -573,7 +571,7 @@ static int ti_open(struct tty_struct *tty, struct usb_serial_port *port)
 		goto unlink_int_urb;
 	}
 
-	dbg("%s - sending TI_START_PORT (2)", __func__);
+	dev_dbg(&port->dev, "%s - sending TI_START_PORT (2)\n", __func__);
 	status = ti_command_out_sync(tdev, TI_START_PORT,
 		(__u8)(TI_UART1_PORT + port_number), 0, NULL, 0);
 	if (status) {
@@ -583,7 +581,7 @@ static int ti_open(struct tty_struct *tty, struct usb_serial_port *port)
 	}
 
 	/* start read urb */
-	dbg("%s - start read urb", __func__);
+	dev_dbg(&port->dev, "%s - start read urb\n", __func__);
 	urb = port->read_urb;
 	if (!urb) {
 		dev_err(&port->dev, "%s - no read urb\n", __func__);
@@ -609,7 +607,7 @@ unlink_int_urb:
 		usb_kill_urb(port->serial->port[0]->interrupt_in_urb);
 release_lock:
 	mutex_unlock(&tdev->td_open_close_lock);
-	dbg("%s - exit %d", __func__, status);
+	dev_dbg(&port->dev, "%s - exit %d\n", __func__, status);
 	return status;
 }
 
@@ -637,7 +635,7 @@ static void ti_close(struct usb_serial_port *port)
 
 	port_number = port->number - port->serial->minor;
 
-	dbg("%s - sending TI_CLOSE_PORT", __func__);
+	dev_dbg(&port->dev, "%s - sending TI_CLOSE_PORT\n", __func__);
 	status = ti_command_out_sync(tdev, TI_CLOSE_PORT,
 		     (__u8)(TI_UART1_PORT + port_number), 0, NULL, 0);
 	if (status)
@@ -664,7 +662,7 @@ static int ti_write(struct tty_struct *tty, struct usb_serial_port *port,
 	struct ti_port *tport = usb_get_serial_port_data(port);
 
 	if (count == 0) {
-		dbg("%s - write request of 0 bytes", __func__);
+		dev_dbg(&port->dev, "%s - write request of 0 bytes\n", __func__);
 		return 0;
 	}
 
@@ -693,7 +691,7 @@ static int ti_write_room(struct tty_struct *tty)
 	room = kfifo_avail(&tport->write_fifo);
 	spin_unlock_irqrestore(&tport->tp_lock, flags);
 
-	dbg("%s - returns %d", __func__, room);
+	dev_dbg(&port->dev, "%s - returns %d\n", __func__, room);
 	return room;
 }
 
@@ -712,7 +710,7 @@ static int ti_chars_in_buffer(struct tty_struct *tty)
 	chars = kfifo_len(&tport->write_fifo);
 	spin_unlock_irqrestore(&tport->tp_lock, flags);
 
-	dbg("%s - returns %d", __func__, chars);
+	dev_dbg(&port->dev, "%s - returns %d\n", __func__, chars);
 	return chars;
 }
 
@@ -755,8 +753,7 @@ static int ti_get_icount(struct tty_struct *tty,
 	struct ti_port *tport = usb_get_serial_port_data(port);
 	struct async_icount cnow = tport->tp_icount;
 
-	dbg("%s - (%d) TIOCGICOUNT RX=%d, TX=%d",
-		__func__, port->number,
+	dev_dbg(&port->dev, "%s - TIOCGICOUNT RX=%d, TX=%d\n", __func__,
 		cnow.rx, cnow.tx);
 
 	icount->cts = cnow.cts;
@@ -782,22 +779,22 @@ static int ti_ioctl(struct tty_struct *tty,
 	struct async_icount cnow;
 	struct async_icount cprev;
 
-	dbg("%s - port %d, cmd = 0x%04X", __func__, port->number, cmd);
+	dev_dbg(&port->dev, "%s - cmd = 0x%04X\n", __func__, cmd);
 
 	if (tport == NULL)
 		return -ENODEV;
 
 	switch (cmd) {
 	case TIOCGSERIAL:
-		dbg("%s - (%d) TIOCGSERIAL", __func__, port->number);
+		dev_dbg(&port->dev, "%s - TIOCGSERIAL\n", __func__);
 		return ti_get_serial_info(tport,
 				(struct serial_struct __user *)arg);
 	case TIOCSSERIAL:
-		dbg("%s - (%d) TIOCSSERIAL", __func__, port->number);
+		dev_dbg(&port->dev, "%s - TIOCSSERIAL\n", __func__);
 		return ti_set_serial_info(tty, tport,
 				(struct serial_struct __user *)arg);
 	case TIOCMIWAIT:
-		dbg("%s - (%d) TIOCMIWAIT", __func__, port->number);
+		dev_dbg(&port->dev, "%s - TIOCMIWAIT\n", __func__);
 		cprev = tport->tp_icount;
 		while (1) {
 			interruptible_sleep_on(&tport->tp_msr_wait);
@@ -834,9 +831,9 @@ static void ti_set_termios(struct tty_struct *tty,
 	cflag = tty->termios->c_cflag;
 	iflag = tty->termios->c_iflag;
 
-	dbg("%s - cflag %08x, iflag %08x", __func__, cflag, iflag);
-	dbg("%s - old clfag %08x, old iflag %08x", __func__,
-				old_termios->c_cflag, old_termios->c_iflag);
+	dev_dbg(&port->dev, "%s - cflag %08x, iflag %08x\n", __func__, cflag, iflag);
+	dev_dbg(&port->dev, "%s - old clfag %08x, old iflag %08x\n", __func__,
+		old_termios->c_cflag, old_termios->c_iflag);
 
 	if (tport == NULL)
 		return;
@@ -926,8 +923,11 @@ static void ti_set_termios(struct tty_struct *tty,
 	if ((cflag & CBAUD) != B0)
 		tty_encode_baud_rate(tty, baud, baud);
 
-	dbg("%s - BaudRate=%d, wBaudRate=%d, wFlags=0x%04X, bDataBits=%d, bParity=%d, bStopBits=%d, cXon=%d, cXoff=%d, bUartMode=%d",
-	__func__, baud, config->wBaudRate, config->wFlags, config->bDataBits, config->bParity, config->bStopBits, config->cXon, config->cXoff, config->bUartMode);
+	dev_dbg(&port->dev,
+		"%s - BaudRate=%d, wBaudRate=%d, wFlags=0x%04X, bDataBits=%d, bParity=%d, bStopBits=%d, cXon=%d, cXoff=%d, bUartMode=%d",
+		__func__, baud, config->wBaudRate, config->wFlags,
+		config->bDataBits, config->bParity, config->bStopBits,
+		config->cXon, config->cXoff, config->bUartMode);
 
 	cpu_to_be16s(&config->wBaudRate);
 	cpu_to_be16s(&config->wFlags);
@@ -979,7 +979,7 @@ static int ti_tiocmget(struct tty_struct *tty)
 		| ((msr & TI_MSR_RI) ? TIOCM_RI : 0)
 		| ((msr & TI_MSR_DSR) ? TIOCM_DSR : 0);
 
-	dbg("%s - 0x%04X", __func__, result);
+	dev_dbg(&port->dev, "%s - 0x%04X\n", __func__, result);
 
 	return result;
 }
@@ -1024,19 +1024,19 @@ static void ti_break(struct tty_struct *tty, int break_state)
 	struct ti_port *tport = usb_get_serial_port_data(port);
 	int status;
 
-	dbg("%s - state = %d", __func__, break_state);
+	dev_dbg(&port->dev, "%s - state = %d\n", __func__, break_state);
 
 	if (tport == NULL)
 		return;
 
 	ti_drain(tport, (tport->tp_closing_wait*HZ)/100, 0);
 
-	status = ti_write_byte(tport->tp_tdev,
+	status = ti_write_byte(port, tport->tp_tdev,
 		tport->tp_uart_base_addr + TI_UART_OFFSET_LCR,
 		TI_LCR_BREAK, break_state == -1 ? TI_LCR_BREAK : 0);
 
 	if (status)
-		dbg("%s - error setting break, %d", __func__, status);
+		dev_dbg(&port->dev, "%s - error setting break, %d\n", __func__, status);
 }
 
 
@@ -1061,18 +1061,17 @@ static void ti_interrupt_callback(struct urb *urb)
 	case -ECONNRESET:
 	case -ENOENT:
 	case -ESHUTDOWN:
-		dbg("%s - urb shutting down, %d", __func__, status);
+		dev_dbg(dev, "%s - urb shutting down, %d\n", __func__, status);
 		tdev->td_urb_error = 1;
 		return;
 	default:
-		dev_err(dev, "%s - nonzero urb status, %d\n",
-			__func__, status);
+		dev_err(dev, "%s - nonzero urb status, %d\n", __func__, status);
 		tdev->td_urb_error = 1;
 		goto exit;
 	}
 
 	if (length != 2) {
-		dbg("%s - bad packet size, %d", __func__, length);
+		dev_dbg(dev, "%s - bad packet size, %d\n", __func__, length);
 		goto exit;
 	}
 
@@ -1084,8 +1083,8 @@ static void ti_interrupt_callback(struct urb *urb)
 	port_number = TI_GET_PORT_FROM_CODE(data[0]);
 	function = TI_GET_FUNC_FROM_CODE(data[0]);
 
-	dbg("%s - port_number %d, function %d, data 0x%02X",
-				__func__, port_number, function, data[1]);
+	dev_dbg(dev, "%s - port_number %d, function %d, data 0x%02X\n",
+		__func__, port_number, function, data[1]);
 
 	if (port_number >= serial->num_ports) {
 		dev_err(dev, "%s - bad port number, %d\n",
@@ -1102,12 +1101,12 @@ static void ti_interrupt_callback(struct urb *urb)
 	switch (function) {
 	case TI_CODE_DATA_ERROR:
 		dev_err(dev, "%s - DATA ERROR, port %d, data 0x%02X\n",
-					__func__, port_number, data[1]);
+			__func__, port_number, data[1]);
 		break;
 
 	case TI_CODE_MODEM_STATUS:
 		msr = data[1];
-		dbg("%s - port %d, msr 0x%02X", __func__, port_number, msr);
+		dev_dbg(dev, "%s - port %d, msr 0x%02X\n", __func__, port_number, msr);
 		ti_handle_new_msr(tport, msr);
 		break;
 
@@ -1140,7 +1139,7 @@ static void ti_bulk_in_callback(struct urb *urb)
 	case -ECONNRESET:
 	case -ENOENT:
 	case -ESHUTDOWN:
-		dbg("%s - urb shutting down, %d", __func__, status);
+		dev_dbg(dev, "%s - urb shutting down, %d\n", __func__, status);
 		tport->tp_tdev->td_urb_error = 1;
 		wake_up_interruptible(&tport->tp_write_wait);
 		return;
@@ -1166,7 +1165,7 @@ static void ti_bulk_in_callback(struct urb *urb)
 				urb->actual_length, urb->transfer_buffer);
 
 			if (!tport->tp_is_open)
-				dbg("%s - port closed, dropping data",
+				dev_dbg(dev, "%s - port closed, dropping data\n",
 					__func__);
 			else
 				ti_recv(&urb->dev->dev, tty,
@@ -1208,7 +1207,7 @@ static void ti_bulk_out_callback(struct urb *urb)
 	case -ECONNRESET:
 	case -ENOENT:
 	case -ESHUTDOWN:
-		dbg("%s - urb shutting down, %d", __func__, status);
+		dev_dbg(&port->dev, "%s - urb shutting down, %d\n", __func__, status);
 		tport->tp_tdev->td_urb_error = 1;
 		wake_up_interruptible(&tport->tp_write_wait);
 		return;
@@ -1307,7 +1306,7 @@ static int ti_set_mcr(struct ti_port *tport, unsigned int mcr)
 	unsigned long flags;
 	int status;
 
-	status = ti_write_byte(tport->tp_tdev,
+	status = ti_write_byte(tport->tp_port, tport->tp_tdev,
 		tport->tp_uart_base_addr + TI_UART_OFFSET_MCR,
 		TI_MCR_RTS | TI_MCR_DTR | TI_MCR_LOOP, mcr);
 
@@ -1344,7 +1343,7 @@ static int ti_get_lsr(struct ti_port *tport)
 		goto free_data;
 	}
 
-	dbg("%s - lsr 0x%02X", __func__, data->bLSR);
+	dev_dbg(&port->dev, "%s - lsr 0x%02X\n", __func__, data->bLSR);
 
 	tport->tp_lsr = data->bLSR;
 
@@ -1401,7 +1400,7 @@ static void ti_handle_new_msr(struct ti_port *tport, __u8 msr)
 	struct tty_struct *tty;
 	unsigned long flags;
 
-	dbg("%s - msr 0x%02X", __func__, msr);
+	dev_dbg(&tport->tp_port->dev, "%s - msr 0x%02X\n", __func__, msr);
 
 	if (msr & TI_MSR_DELTA_MASK) {
 		spin_lock_irqsave(&tport->tp_lock, flags);
@@ -1560,21 +1559,21 @@ static int ti_command_in_sync(struct ti_device *tdev, __u8 command,
 }
 
 
-static int ti_write_byte(struct ti_device *tdev, unsigned long addr,
-	__u8 mask, __u8 byte)
+static int ti_write_byte(struct usb_serial_port *port,
+			struct ti_device *tdev, unsigned long addr,
+			__u8 mask, __u8 byte)
 {
 	int status;
 	unsigned int size;
 	struct ti_write_data_bytes *data;
-	struct device *dev = &tdev->td_serial->dev->dev;
 
-	dbg("%s - addr 0x%08lX, mask 0x%02X, byte 0x%02X",
-					__func__, addr, mask, byte);
+	dev_dbg(&port->dev, "%s - addr 0x%08lX, mask 0x%02X, byte 0x%02X\n", __func__,
+		addr, mask, byte);
 
 	size = sizeof(struct ti_write_data_bytes) + 2;
 	data = kmalloc(size, GFP_KERNEL);
 	if (!data) {
-		dev_err(dev, "%s - out of memory\n", __func__);
+		dev_err(&port->dev, "%s - out of memory\n", __func__);
 		return -ENOMEM;
 	}
 
@@ -1590,7 +1589,7 @@ static int ti_write_byte(struct ti_device *tdev, unsigned long addr,
 		(__u8 *)data, size);
 
 	if (status < 0)
-		dev_err(dev, "%s - failed, %d\n", __func__, status);
+		dev_err(&port->dev, "%s - failed, %d\n", __func__, status);
 
 	kfree(data);
 
@@ -1615,7 +1614,7 @@ static int ti_do_download(struct usb_device *dev, int pipe,
 					- sizeof(struct ti_firmware_header)));
 	header->bCheckSum = cs;
 
-	dbg("%s - downloading firmware", __func__);
+	dev_dbg(&dev->dev, "%s - downloading firmware\n", __func__);
 	for (pos = 0; pos < size; pos += done) {
 		len = min(size - pos, TI_DOWNLOAD_MAX_PACKET_SIZE);
 		status = usb_bulk_msg(dev, pipe, buffer + pos, len,
@@ -1691,7 +1690,7 @@ static int ti_download_firmware(struct ti_device *tdev)
 		status = ti_do_download(dev, pipe, buffer, fw_p->size);
 		kfree(buffer);
 	} else {
-		dbg("%s ENOMEM\n", __func__);
+		dev_dbg(&dev->dev, "%s ENOMEM\n", __func__);
 		status = -ENOMEM;
 	}
 	release_firmware(fw_p);
@@ -1701,7 +1700,7 @@ static int ti_download_firmware(struct ti_device *tdev)
 		return status;
 	}
 
-	dbg("%s - download successful", __func__);
+	dev_dbg(&dev->dev, "%s - download successful\n", __func__);
 
 	return 0;
 }