[PATCH] Serial: Split 8250 port table

Add separate files for the different 8250 ISA-based serial boards.

Looking across all the various architectures, it seems reasonable that
we can key the availability of the configuration options for these
beasts to the bus-related symbols (iow, CONFIG_ISA).  We also standardise
the base baud/uart clock rate for these boards - I'm sure that isn't
architecture specific, but is solely dependent on the crystal fitted
on the board (which should be the same no matter what type of machine
its fitted into.)

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 59 insertions, 16 deletions

diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 25fcef2c42deeb..e879bce160dfe8 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -89,11 +89,11 @@ config SERIAL_8250_NR_UARTS
 	int "Maximum number of non-legacy 8250/16550 serial ports"
 	depends on SERIAL_8250
 	default "4"
-	---help---
-	  Set this to the number of non-legacy serial ports you want
-	  the driver to support.  This includes any ports discovered
-	  via ACPI or PCI enumeration and any ports that may be added
-	  at run-time via hot-plug.
+	help
+	  Set this to the number of serial ports you want the driver
+	  to support.  This includes any ports discovered via ACPI or
+	  PCI enumeration and any ports that may be added at run-time
+	  via hot-plug, or any ISA multi-port serial cards.
 
 config SERIAL_8250_EXTENDED
 	bool "Extended 8250/16550 serial driver options"
@@ -141,31 +141,74 @@ config SERIAL_8250_DETECT_IRQ
 
 	  If unsure, say N.
 
-config SERIAL_8250_MULTIPORT
-	bool "Support special multiport boards"
-	depends on SERIAL_8250_EXTENDED
-	help
-	  Some multiport serial ports have special ports which are used to
-	  signal when there are any serial ports on the board which need
-	  servicing. Say Y here to enable the serial driver to take advantage
-	  of those special I/O ports.
-
 config SERIAL_8250_RSA
 	bool "Support RSA serial ports"
 	depends on SERIAL_8250_EXTENDED
 	help
 	  ::: To be written :::
 
-comment "Non-8250 serial port support"
+#
+# Multi-port serial cards
+#
+
+config SERIAL_8250_FOURPORT
+	tristate "Support Fourport cards"
+	depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
+	help
+	  Say Y here if you have an AST FourPort serial board.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called 8250_fourport.
+
+config SERIAL_8250_ACCENT
+	tristate "Support Accent cards"
+	depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
+	help
+	  Say Y here if you have an Accent Async serial board.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called 8250_accent.
+
+
+config SERIAL_8250_BOCA
+	tristate "Support Boca cards"
+	depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
+	help
+	  Say Y here if you have a Boca serial board.  Please read the Boca
+	  mini-HOWTO, avaialble from <http://www.tldp.org/docs.html#howto>
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called 8250_boca.
+
+
+config SERIAL_8250_HUB6
+	tristate "Support Hub6 cards"
+	depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
+	help
+	  Say Y here if you have a HUB6 serial board.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called 8250_hub6.
+
+config SERIAL_8250_MCA
+	tristate "Support 8250-type ports on MCA buses"
+	depends on SERIAL_8250 != n && MCA
+	help
+	  Say Y here if you have a MCA serial ports.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called 8250_mca.
 
 config SERIAL_8250_ACORN
 	tristate "Acorn expansion card serial port support"
-	depends on ARM && ARCH_ACORN && SERIAL_8250
+	depends on ARCH_ACORN && SERIAL_8250
 	help
 	  If you have an Atomwide Serial card or Serial Port card for an Acorn
 	  system, say Y to this option.  The driver can handle 1, 2, or 3 port
 	  cards.  If unsure, say N.
 
+comment "Non-8250 serial port support"
+
 config SERIAL_AMBA_PL010
 	tristate "ARM AMBA PL010 serial port support"
 	depends on ARM_AMBA