powercap: intel_rapl: Support per domain energy/power/time unit

RAPL MSR/MMIO Interface has package scope unit register but some RAPL
domains like Dram/Psys may use a fixed energy unit value instead of the
default unit value on certain platforms.
RAPL TPMI Interface supports per domain unit register.

For the above reasons, add support for per domain unit register and per
domain energy/power/time unit.

When per domain unit register is not available, use the package scope
unit register as the per domain unit register for each RAPL domain so
that this change is transparent to MSR/MMIO Interface.

No functional change intended.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Wang Wendy <wendy.wang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

1 files changed, 69 insertions, 59 deletions

diff --git a/drivers/powercap/intel_rapl_common.c b/drivers/powercap/intel_rapl_common.c
index 267ec36b1649a..3625d4466cb35 100644
--- a/drivers/powercap/intel_rapl_common.c
+++ b/drivers/powercap/intel_rapl_common.c
@@ -105,9 +105,9 @@ static const char pl4_name[] = "peak_power";
 
 struct rapl_defaults {
 	u8 floor_freq_reg_addr;
-	int (*check_unit)(struct rapl_package *rp, int cpu);
+	int (*check_unit)(struct rapl_domain *rd, int cpu);
 	void (*set_floor_freq)(struct rapl_domain *rd, bool mode);
-	u64 (*compute_time_window)(struct rapl_package *rp, u64 val,
+	u64 (*compute_time_window)(struct rapl_domain *rd, u64 val,
 				    bool to_raw);
 	unsigned int dram_domain_energy_unit;
 	unsigned int psys_domain_energy_unit;
@@ -557,7 +557,6 @@ static void rapl_init_domains(struct rapl_package *rp)
 	enum rapl_domain_type i;
 	enum rapl_domain_reg_id j;
 	struct rapl_domain *rd = rp->domains;
-	struct rapl_defaults *defaults = get_defaults(rp);
 
 	for (i = 0; i < RAPL_DOMAIN_MAX; i++) {
 		unsigned int mask = rp->domain_map & (1 << i);
@@ -596,24 +595,6 @@ static void rapl_init_domains(struct rapl_package *rp)
 		for (j = 0; j < RAPL_DOMAIN_REG_MAX; j++)
 			rd->regs[j] = rp->priv->regs[i][j];
 
-		switch (i) {
-		case RAPL_DOMAIN_DRAM:
-			rd->domain_energy_unit =
-			    defaults->dram_domain_energy_unit;
-			if (rd->domain_energy_unit)
-				pr_info("DRAM domain energy unit %dpj\n",
-					rd->domain_energy_unit);
-			break;
-		case RAPL_DOMAIN_PLATFORM:
-			rd->domain_energy_unit =
-			    defaults->psys_domain_energy_unit;
-			if (rd->domain_energy_unit)
-				pr_info("Platform domain energy unit %dpj\n",
-					rd->domain_energy_unit);
-			break;
-		default:
-			break;
-		}
 		rd++;
 	}
 }
@@ -622,24 +603,19 @@ static u64 rapl_unit_xlate(struct rapl_domain *rd, enum unit_type type,
 			   u64 value, int to_raw)
 {
 	u64 units = 1;
-	struct rapl_package *rp = rd->rp;
-	struct rapl_defaults *defaults = get_defaults(rp);
+	struct rapl_defaults *defaults = get_defaults(rd->rp);
 	u64 scale = 1;
 
 	switch (type) {
 	case POWER_UNIT:
-		units = rp->power_unit;
+		units = rd->power_unit;
 		break;
 	case ENERGY_UNIT:
 		scale = ENERGY_UNIT_SCALE;
-		/* per domain unit takes precedence */
-		if (rd->domain_energy_unit)
-			units = rd->domain_energy_unit;
-		else
-			units = rp->energy_unit;
+		units = rd->energy_unit;
 		break;
 	case TIME_UNIT:
-		return defaults->compute_time_window(rp, value, to_raw);
+		return defaults->compute_time_window(rd, value, to_raw);
 	case ARBITRARY_UNIT:
 	default:
 		return value;
@@ -857,58 +833,58 @@ static int rapl_write_data_raw(struct rapl_domain *rd,
  * power unit : microWatts  : Represented in milliWatts by default
  * time unit  : microseconds: Represented in seconds by default
  */
-static int rapl_check_unit_core(struct rapl_package *rp, int cpu)
+static int rapl_check_unit_core(struct rapl_domain *rd, int cpu)
 {
 	struct reg_action ra;
 	u32 value;
 
-	ra.reg = rp->priv->reg_unit;
+	ra.reg = rd->regs[RAPL_DOMAIN_REG_UNIT];
 	ra.mask = ~0;
-	if (rp->priv->read_raw(cpu, &ra)) {
+	if (rd->rp->priv->read_raw(cpu, &ra)) {
 		pr_err("Failed to read power unit REG 0x%llx on CPU %d, exit.\n",
-		       rp->priv->reg_unit, cpu);
+			ra.reg, cpu);
 		return -ENODEV;
 	}
 
 	value = (ra.value & ENERGY_UNIT_MASK) >> ENERGY_UNIT_OFFSET;
-	rp->energy_unit = ENERGY_UNIT_SCALE * 1000000 / (1 << value);
+	rd->energy_unit = ENERGY_UNIT_SCALE * 1000000 / (1 << value);
 
 	value = (ra.value & POWER_UNIT_MASK) >> POWER_UNIT_OFFSET;
-	rp->power_unit = 1000000 / (1 << value);
+	rd->power_unit = 1000000 / (1 << value);
 
 	value = (ra.value & TIME_UNIT_MASK) >> TIME_UNIT_OFFSET;
-	rp->time_unit = 1000000 / (1 << value);
+	rd->time_unit = 1000000 / (1 << value);
 
-	pr_debug("Core CPU %s energy=%dpJ, time=%dus, power=%duW\n",
-		 rp->name, rp->energy_unit, rp->time_unit, rp->power_unit);
+	pr_debug("Core CPU %s:%s energy=%dpJ, time=%dus, power=%duW\n",
+		 rd->rp->name, rd->name, rd->energy_unit, rd->time_unit, rd->power_unit);
 
 	return 0;
 }
 
-static int rapl_check_unit_atom(struct rapl_package *rp, int cpu)
+static int rapl_check_unit_atom(struct rapl_domain *rd, int cpu)
 {
 	struct reg_action ra;
 	u32 value;
 
-	ra.reg = rp->priv->reg_unit;
+	ra.reg = rd->regs[RAPL_DOMAIN_REG_UNIT];
 	ra.mask = ~0;
-	if (rp->priv->read_raw(cpu, &ra)) {
+	if (rd->rp->priv->read_raw(cpu, &ra)) {
 		pr_err("Failed to read power unit REG 0x%llx on CPU %d, exit.\n",
-		       rp->priv->reg_unit, cpu);
+			ra.reg, cpu);
 		return -ENODEV;
 	}
 
 	value = (ra.value & ENERGY_UNIT_MASK) >> ENERGY_UNIT_OFFSET;
-	rp->energy_unit = ENERGY_UNIT_SCALE * 1 << value;
+	rd->energy_unit = ENERGY_UNIT_SCALE * 1 << value;
 
 	value = (ra.value & POWER_UNIT_MASK) >> POWER_UNIT_OFFSET;
-	rp->power_unit = (1 << value) * 1000;
+	rd->power_unit = (1 << value) * 1000;
 
 	value = (ra.value & TIME_UNIT_MASK) >> TIME_UNIT_OFFSET;
-	rp->time_unit = 1000000 / (1 << value);
+	rd->time_unit = 1000000 / (1 << value);
 
-	pr_debug("Atom %s energy=%dpJ, time=%dus, power=%duW\n",
-		 rp->name, rp->energy_unit, rp->time_unit, rp->power_unit);
+	pr_debug("Atom %s:%s energy=%dpJ, time=%dus, power=%duW\n",
+		 rd->rp->name, rd->name, rd->energy_unit, rd->time_unit, rd->power_unit);
 
 	return 0;
 }
@@ -1011,7 +987,7 @@ static void set_floor_freq_atom(struct rapl_domain *rd, bool enable)
 		       defaults->floor_freq_reg_addr, mdata);
 }
 
-static u64 rapl_compute_time_window_core(struct rapl_package *rp, u64 value,
+static u64 rapl_compute_time_window_core(struct rapl_domain *rd, u64 value,
 					 bool to_raw)
 {
 	u64 f, y;		/* fraction and exp. used for time unit */
@@ -1023,12 +999,12 @@ static u64 rapl_compute_time_window_core(struct rapl_package *rp, u64 value,
 	if (!to_raw) {
 		f = (value & 0x60) >> 5;
 		y = value & 0x1f;
-		value = (1 << y) * (4 + f) * rp->time_unit / 4;
+		value = (1 << y) * (4 + f) * rd->time_unit / 4;
 	} else {
-		if (value < rp->time_unit)
+		if (value < rd->time_unit)
 			return 0;
 
-		do_div(value, rp->time_unit);
+		do_div(value, rd->time_unit);
 		y = ilog2(value);
 
 		/*
@@ -1044,7 +1020,7 @@ static u64 rapl_compute_time_window_core(struct rapl_package *rp, u64 value,
 	return value;
 }
 
-static u64 rapl_compute_time_window_atom(struct rapl_package *rp, u64 value,
+static u64 rapl_compute_time_window_atom(struct rapl_domain *rd, u64 value,
 					 bool to_raw)
 {
 	/*
@@ -1052,9 +1028,9 @@ static u64 rapl_compute_time_window_atom(struct rapl_package *rp, u64 value,
 	 * where time_unit is default to 1 sec. Never 0.
 	 */
 	if (!to_raw)
-		return (value) ? value * rp->time_unit : rp->time_unit;
+		return (value) ? value * rd->time_unit : rd->time_unit;
 
-	value = div64_u64(value, rp->time_unit);
+	value = div64_u64(value, rd->time_unit);
 
 	return value;
 }
@@ -1300,6 +1276,40 @@ static int rapl_check_domain(int cpu, int domain, struct rapl_package *rp)
 }
 
 /*
+ * Get per domain energy/power/time unit.
+ * RAPL Interfaces without per domain unit register will use the package
+ * scope unit register to set per domain units.
+ */
+static int rapl_get_domain_unit(struct rapl_domain *rd)
+{
+	struct rapl_defaults *defaults = get_defaults(rd->rp);
+	int ret;
+
+	if (!rd->regs[RAPL_DOMAIN_REG_UNIT]) {
+		if (!rd->rp->priv->reg_unit) {
+			pr_err("No valid Unit register found\n");
+			return -ENODEV;
+		}
+		rd->regs[RAPL_DOMAIN_REG_UNIT] = rd->rp->priv->reg_unit;
+	}
+
+	if (!defaults->check_unit) {
+		pr_err("missing .check_unit() callback\n");
+		return -ENODEV;
+	}
+
+	ret = defaults->check_unit(rd, rd->rp->lead_cpu);
+	if (ret)
+		return ret;
+
+	if (rd->id == RAPL_DOMAIN_DRAM && defaults->dram_domain_energy_unit)
+		rd->energy_unit = defaults->dram_domain_energy_unit;
+	if (rd->id == RAPL_DOMAIN_PLATFORM && defaults->psys_domain_energy_unit)
+		rd->energy_unit = defaults->psys_domain_energy_unit;
+	return 0;
+}
+
+/*
  * Check if power limits are available. Two cases when they are not available:
  * 1. Locked by BIOS, in this case we still provide read-only access so that
  *    users can see what limit is set by the BIOS.
@@ -1359,8 +1369,10 @@ static int rapl_detect_domains(struct rapl_package *rp, int cpu)
 
 	rapl_init_domains(rp);
 
-	for (rd = rp->domains; rd < rp->domains + rp->nr_domains; rd++)
+	for (rd = rp->domains; rd < rp->domains + rp->nr_domains; rd++) {
+		rapl_get_domain_unit(rd);
 		rapl_detect_powerlimit(rd);
+	}
 
 	return 0;
 }
@@ -1418,7 +1430,6 @@ struct rapl_package *rapl_add_package(int cpu, struct rapl_if_priv *priv)
 {
 	int id = topology_logical_die_id(cpu);
 	struct rapl_package *rp;
-	struct rapl_defaults *defaults;
 	int ret;
 
 	rp = kzalloc(sizeof(struct rapl_package), GFP_KERNEL);
@@ -1442,9 +1453,8 @@ struct rapl_package *rapl_add_package(int cpu, struct rapl_if_priv *priv)
 		snprintf(rp->name, PACKAGE_DOMAIN_NAME_LENGTH, "package-%d",
 			 topology_physical_package_id(cpu));
 
-	defaults = get_defaults(rp);
 	/* check if the package contains valid domains */
-	if (rapl_detect_domains(rp, cpu) || defaults->check_unit(rp, cpu)) {
+	if (rapl_detect_domains(rp, cpu)) {
 		ret = -ENODEV;
 		goto err_free_package;
 	}