diff options
| author | Ulf Hansson <ulf.hansson@linaro.org> | 2023-09-12 00:25:50 +0200 |
|---|---|---|
| committer | Ulf Hansson <ulf.hansson@linaro.org> | 2023-09-20 12:08:54 +0200 |
| commit | c067e7ffb31f270163b9f11da83a86ab660ee783 (patch) | |
| tree | 3f55d587963ca2428f4f98a4fb5789e6bbc7eecc /drivers/pmdomain | |
| parent | 1bfadf2edd653af321af17e1cfac4fb28c3f790d (diff) | |
| download | linux-c067e7ffb31f270163b9f11da83a86ab660ee783.tar.gz | |
pmdomain: bcm: Move Kconfig options to the pmdomain subsystem
The Kconfig options belongs closer to the corresponding implementations,
hence let's move them from the soc subsystem to the pmdomain subsystem.
Cc: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: <linux-mips@vger.kernel.org>
Cc: <linux-rpi-kernel@lists.infradead.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Diffstat (limited to 'drivers/pmdomain')
| -rw-r--r-- | drivers/pmdomain/Kconfig | 1 | ||||
| -rw-r--r-- | drivers/pmdomain/bcm/Kconfig | 42 |
2 files changed, 43 insertions, 0 deletions
diff --git a/drivers/pmdomain/Kconfig b/drivers/pmdomain/Kconfig index 482d9e970e147..ddc05d6af1003 100644 --- a/drivers/pmdomain/Kconfig +++ b/drivers/pmdomain/Kconfig @@ -4,5 +4,6 @@ menu "PM Domains" source "drivers/pmdomain/actions/Kconfig" source "drivers/pmdomain/amlogic/Kconfig" source "drivers/pmdomain/apple/Kconfig" +source "drivers/pmdomain/bcm/Kconfig" endmenu diff --git a/drivers/pmdomain/bcm/Kconfig b/drivers/pmdomain/bcm/Kconfig new file mode 100644 index 0000000000000..b28c9f6d256b3 --- /dev/null +++ b/drivers/pmdomain/bcm/Kconfig @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: GPL-2.0-only +menu "Broadcom PM Domains" + +config BCM2835_POWER + bool "BCM2835 power domain driver" + depends on ARCH_BCM2835 || (COMPILE_TEST && OF) + default y if ARCH_BCM2835 + select PM_GENERIC_DOMAINS if PM + select RESET_CONTROLLER + help + This enables support for the BCM2835 power domains and reset + controller. Any usage of power domains by the Raspberry Pi + firmware means that Linux usage of the same power domain + must be accessed using the RASPBERRYPI_POWER driver + +config RASPBERRYPI_POWER + bool "Raspberry Pi power domain driver" + depends on ARCH_BCM2835 || (COMPILE_TEST && OF) + depends on RASPBERRYPI_FIRMWARE=y + select PM_GENERIC_DOMAINS if PM + help + This enables support for the RPi power domains which can be enabled + or disabled via the RPi firmware. + +config BCM_PMB + bool "Broadcom PMB (Power Management Bus) driver" + depends on ARCH_BCMBCA || (COMPILE_TEST && OF) + default ARCH_BCMBCA + select PM_GENERIC_DOMAINS if PM + help + This enables support for the Broadcom's PMB (Power Management Bus) that + is used for disabling and enabling SoC devices. + +config BCM63XX_POWER + bool "BCM63xx power domain driver" + depends on BMIPS_GENERIC || (COMPILE_TEST && OF) + select PM_GENERIC_DOMAINS if PM + help + This enables support for the BCM63xx power domains controller on + BCM6318, BCM6328, BCM6362 and BCM63268 SoCs. + +endmenu |