cfg80211 API for channels/bitrates, mac80211 and driver conversion

This patch creates new cfg80211 wiphy API for channel and bitrate
registration and converts mac80211 and drivers to the new API. The
old mac80211 API is completely ripped out. All drivers (except ath5k)
are updated to the new API, in many cases I expect that optimisations
can be done.

Along with the regulatory code I've also ripped out the
IEEE80211_HW_DEFAULT_REG_DOMAIN_CONFIGURED flag, I believe it to be
unnecessary if the hardware simply gives us whatever channels it wants
to support and we then enable/disable them as required, which is pretty
much required for travelling.

Additionally, the patch adds proper "basic" rate handling for STA
mode interface, AP mode interface will have to have new API added
to allow userspace to set the basic rate set, currently it'll be
empty... However, the basic rate handling will need to be moved to
the BSS conf stuff.

I do expect there to be bugs in this, especially wrt. transmit
power handling where I'm basically clueless about how it should work.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 5 insertions, 10 deletions

diff --git a/drivers/net/wireless/zd1211rw/zd_chip.c b/drivers/net/wireless/zd1211rw/zd_chip.c
index 99e5b03b3f5140..e3fba6f09455ea 100644
--- a/drivers/net/wireless/zd1211rw/zd_chip.c
+++ b/drivers/net/wireless/zd1211rw/zd_chip.c
@@ -986,7 +986,7 @@ static int print_fw_version(struct zd_chip *chip)
 	return 0;
 }
 
-static int set_mandatory_rates(struct zd_chip *chip, int mode)
+static int set_mandatory_rates(struct zd_chip *chip, int gmode)
 {
 	u32 rates;
 	ZD_ASSERT(mutex_is_locked(&chip->mutex));
@@ -994,17 +994,12 @@ static int set_mandatory_rates(struct zd_chip *chip, int mode)
 	 * that the device is supporting. Until further notice we should try
 	 * to support 802.11g also for full speed USB.
 	 */
-	switch (mode) {
-	case MODE_IEEE80211B:
+	if (!gmode)
 		rates = CR_RATE_1M|CR_RATE_2M|CR_RATE_5_5M|CR_RATE_11M;
-		break;
-	case MODE_IEEE80211G:
+	else
 		rates = CR_RATE_1M|CR_RATE_2M|CR_RATE_5_5M|CR_RATE_11M|
 			CR_RATE_6M|CR_RATE_12M|CR_RATE_24M;
-		break;
-	default:
-		return -EINVAL;
-	}
+
 	return zd_iowrite32_locked(chip, rates, CR_MANDATORY_RATE_TBL);
 }
 
@@ -1108,7 +1103,7 @@ int zd_chip_init_hw(struct zd_chip *chip)
 	 * It might be discussed, whether we should suppport pure b mode for
 	 * full speed USB.
 	 */
-	r = set_mandatory_rates(chip, MODE_IEEE80211G);
+	r = set_mandatory_rates(chip, 1);
 	if (r)
 		goto out;
 	/* Disabling interrupts is certainly a smart thing here.