[media] move i2c files into drivers/media/i2c

Move ancillary I2C drivers into drivers/media/i2c, in order to
better organize them.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

1 files changed, 3 insertions, 576 deletions

diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index a7bd9576ccd095..f2171e777dd3d2 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -1,578 +1,4 @@
-#
-# Generic video config states
-#
-
-config VIDEO_BTCX
-	depends on PCI
-	tristate
-
-config VIDEO_TVEEPROM
-	tristate
-	depends on I2C
-
-#
-# Multimedia Video device configuration
-#
-
-menuconfig VIDEO_CAPTURE_DRIVERS
-	bool "Video capture adapters"
-	depends on VIDEO_V4L2
-	depends on MEDIA_CAMERA_SUPPORT || MEDIA_ANALOG_TV_SUPPORT
-	default y
-	---help---
-	  Say Y here to enable selecting the video adapters for
-	  webcams, analog TV, and hybrid analog/digital TV.
-	  Some of those devices also supports FM radio.
-
-if VIDEO_CAPTURE_DRIVERS && VIDEO_V4L2
-
-config VIDEO_HELPER_CHIPS_AUTO
-	bool "Autoselect pertinent encoders/decoders and other helper chips"
-	default y if !EXPERT
-	---help---
-	  Most video cards may require additional modules to encode or
-	  decode audio/video standards. This option will autoselect
-	  all pertinent modules to each selected video module.
-
-	  Unselect this only if you know exactly what you are doing, since
-	  it may break support on some boards.
-
-	  In doubt, say Y.
-
-config VIDEO_IR_I2C
-	tristate "I2C module for IR" if !VIDEO_HELPER_CHIPS_AUTO
-	depends on I2C && RC_CORE
-	default y
-	---help---
-	  Most boards have an IR chip directly connected via GPIO. However,
-	  some video boards have the IR connected via I2C bus.
-
-	  If your board doesn't have an I2C IR chip, you may disable this
-	  option.
-
-	  In doubt, say Y.
-
-#
-# Encoder / Decoder module configuration
-#
-
-menu "Encoders, decoders, sensors and other helper chips"
-	visible if !VIDEO_HELPER_CHIPS_AUTO
-
-comment "Audio decoders, processors and mixers"
-
-config VIDEO_TVAUDIO
-	tristate "Simple audio decoder chips"
-	depends on VIDEO_V4L2 && I2C
-	---help---
-	  Support for several audio decoder chips found on some bt8xx boards:
-	  Philips: tda9840, tda9873h, tda9874h/a, tda9850, tda985x, tea6300,
-		   tea6320, tea6420, tda8425, ta8874z.
-	  Microchip: pic16c54 based design on ProVideo PV951 board.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called tvaudio.
-
-config VIDEO_TDA7432
-	tristate "Philips TDA7432 audio processor"
-	depends on VIDEO_V4L2 && I2C
-	---help---
-	  Support for tda7432 audio decoder chip found on some bt8xx boards.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called tda7432.
-
-config VIDEO_TDA9840
-	tristate "Philips TDA9840 audio processor"
-	depends on I2C
-	---help---
-	  Support for tda9840 audio decoder chip found on some Zoran boards.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called tda9840.
-
-config VIDEO_TEA6415C
-	tristate "Philips TEA6415C audio processor"
-	depends on I2C
-	---help---
-	  Support for tea6415c audio decoder chip found on some bt8xx boards.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called tea6415c.
-
-config VIDEO_TEA6420
-	tristate "Philips TEA6420 audio processor"
-	depends on I2C
-	---help---
-	  Support for tea6420 audio decoder chip found on some bt8xx boards.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called tea6420.
-
-config VIDEO_MSP3400
-	tristate "Micronas MSP34xx audio decoders"
-	depends on VIDEO_V4L2 && I2C
-	---help---
-	  Support for the Micronas MSP34xx series of audio decoders.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called msp3400.
-
-config VIDEO_CS5345
-	tristate "Cirrus Logic CS5345 audio ADC"
-	depends on VIDEO_V4L2 && I2C
-	---help---
-	  Support for the Cirrus Logic CS5345 24-bit, 192 kHz
-	  stereo A/D converter.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called cs5345.
-
-config VIDEO_CS53L32A
-	tristate "Cirrus Logic CS53L32A audio ADC"
-	depends on VIDEO_V4L2 && I2C
-	---help---
-	  Support for the Cirrus Logic CS53L32A low voltage
-	  stereo A/D converter.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called cs53l32a.
-
-config VIDEO_TLV320AIC23B
-	tristate "Texas Instruments TLV320AIC23B audio codec"
-	depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
-	---help---
-	  Support for the Texas Instruments TLV320AIC23B audio codec.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called tlv320aic23b.
-
-config VIDEO_WM8775
-	tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer"
-	depends on VIDEO_V4L2 && I2C
-	---help---
-	  Support for the Wolfson Microelectronics WM8775 high
-	  performance stereo A/D Converter with a 4 channel input mixer.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called wm8775.
-
-config VIDEO_WM8739
-	tristate "Wolfson Microelectronics WM8739 stereo audio ADC"
-	depends on VIDEO_V4L2 && I2C
-	---help---
-	  Support for the Wolfson Microelectronics WM8739
-	  stereo A/D Converter.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called wm8739.
-
-config VIDEO_VP27SMPX
-	tristate "Panasonic VP27s internal MPX"
-	depends on VIDEO_V4L2 && I2C
-	---help---
-	  Support for the internal MPX of the Panasonic VP27s tuner.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called vp27smpx.
-
-comment "RDS decoders"
-
-config VIDEO_SAA6588
-	tristate "SAA6588 Radio Chip RDS decoder support"
-	depends on VIDEO_V4L2 && I2C
-
-	help
-	  Support for this Radio Data System (RDS) decoder. This allows
-	  seeing radio station identification transmitted using this
-	  standard.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called saa6588.
-
-comment "Video decoders"
-
-config VIDEO_ADV7180
-	tristate "Analog Devices ADV7180 decoder"
-	depends on VIDEO_V4L2 && I2C
-	---help---
-	  Support for the Analog Devices ADV7180 video decoder.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called adv7180.
-
-config VIDEO_ADV7183
-	tristate "Analog Devices ADV7183 decoder"
-	depends on VIDEO_V4L2 && I2C
-	---help---
-	  V4l2 subdevice driver for the Analog Devices
-	  ADV7183 video decoder.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called adv7183.
-
-config VIDEO_BT819
-	tristate "BT819A VideoStream decoder"
-	depends on VIDEO_V4L2 && I2C
-	---help---
-	  Support for BT819A video decoder.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called bt819.
-
-config VIDEO_BT856
-	tristate "BT856 VideoStream decoder"
-	depends on VIDEO_V4L2 && I2C
-	---help---
-	  Support for BT856 video decoder.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called bt856.
-
-config VIDEO_BT866
-	tristate "BT866 VideoStream decoder"
-	depends on VIDEO_V4L2 && I2C
-	---help---
-	  Support for BT866 video decoder.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called bt866.
-
-config VIDEO_KS0127
-	tristate "KS0127 video decoder"
-	depends on VIDEO_V4L2 && I2C
-	---help---
-	  Support for KS0127 video decoder.
-
-	  This chip is used on AverMedia AVS6EYES Zoran-based MJPEG
-	  cards.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called ks0127.
-
-config VIDEO_SAA7110
-	tristate "Philips SAA7110 video decoder"
-	depends on VIDEO_V4L2 && I2C
-	---help---
-	  Support for the Philips SAA7110 video decoders.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called saa7110.
-
-config VIDEO_SAA711X
-	tristate "Philips SAA7111/3/4/5 video decoders"
-	depends on VIDEO_V4L2 && I2C
-	---help---
-	  Support for the Philips SAA7111/3/4/5 video decoders.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called saa7115.
-
-config VIDEO_SAA7191
-	tristate "Philips SAA7191 video decoder"
-	depends on VIDEO_V4L2 && I2C
-	---help---
-	  Support for the Philips SAA7191 video decoder.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called saa7191.
-
-config VIDEO_TVP514X
-	tristate "Texas Instruments TVP514x video decoder"
-	depends on VIDEO_V4L2 && I2C
-	---help---
-	  This is a Video4Linux2 sensor-level driver for the TI TVP5146/47
-	  decoder. It is currently working with the TI OMAP3 camera
-	  controller.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called tvp514x.
-
-config VIDEO_TVP5150
-	tristate "Texas Instruments TVP5150 video decoder"
-	depends on VIDEO_V4L2 && I2C
-	---help---
-	  Support for the Texas Instruments TVP5150 video decoder.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called tvp5150.
-
-config VIDEO_TVP7002
-	tristate "Texas Instruments TVP7002 video decoder"
-	depends on VIDEO_V4L2 && I2C
-	---help---
-	  Support for the Texas Instruments TVP7002 video decoder.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called tvp7002.
-
-config VIDEO_VPX3220
-	tristate "vpx3220a, vpx3216b & vpx3214c video decoders"
-	depends on VIDEO_V4L2 && I2C
-	---help---
-	  Support for VPX322x video decoders.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called vpx3220.
-
-comment "Video and audio decoders"
-
-config VIDEO_SAA717X
-	tristate "Philips SAA7171/3/4 audio/video decoders"
-	depends on VIDEO_V4L2 && I2C
-	---help---
-	  Support for the Philips SAA7171/3/4 audio/video decoders.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called saa717x.
-
-source "drivers/media/video/cx25840/Kconfig"
-
-comment "MPEG video encoders"
-
-config VIDEO_CX2341X
-	tristate "Conexant CX2341x MPEG encoders"
-	depends on VIDEO_V4L2 && VIDEO_V4L2_COMMON
-	---help---
-	  Support for the Conexant CX23416 MPEG encoders
-	  and CX23415 MPEG encoder/decoders.
-
-	  This module currently supports the encoding functions only.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called cx2341x.
-
-comment "Video encoders"
-
-config VIDEO_SAA7127
-	tristate "Philips SAA7127/9 digital video encoders"
-	depends on VIDEO_V4L2 && I2C
-	---help---
-	  Support for the Philips SAA7127/9 digital video encoders.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called saa7127.
-
-config VIDEO_SAA7185
-	tristate "Philips SAA7185 video encoder"
-	depends on VIDEO_V4L2 && I2C
-	---help---
-	  Support for the Philips SAA7185 video encoder.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called saa7185.
-
-config VIDEO_ADV7170
-	tristate "Analog Devices ADV7170 video encoder"
-	depends on VIDEO_V4L2 && I2C
-	---help---
-	  Support for the Analog Devices ADV7170 video encoder driver
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called adv7170.
-
-config VIDEO_ADV7175
-	tristate "Analog Devices ADV7175 video encoder"
-	depends on VIDEO_V4L2 && I2C
-	---help---
-	  Support for the Analog Devices ADV7175 video encoder driver
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called adv7175.
-
-config VIDEO_ADV7343
-	tristate "ADV7343 video encoder"
-	depends on I2C
-	help
-	  Support for Analog Devices I2C bus based ADV7343 encoder.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called adv7343.
-
-config VIDEO_ADV7393
-	tristate "ADV7393 video encoder"
-	depends on I2C
-	help
-	  Support for Analog Devices I2C bus based ADV7393 encoder.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called adv7393.
-
-config VIDEO_AK881X
-	tristate "AK8813/AK8814 video encoders"
-	depends on I2C
-	help
-	  Video output driver for AKM AK8813 and AK8814 TV encoders
-
-comment "Camera sensor devices"
-
-config VIDEO_APTINA_PLL
-	tristate
-
-config VIDEO_SMIAPP_PLL
-	tristate
-
-config VIDEO_OV7670
-	tristate "OmniVision OV7670 sensor support"
-	depends on I2C && VIDEO_V4L2
-	depends on MEDIA_CAMERA_SUPPORT
-	---help---
-	  This is a Video4Linux2 sensor-level driver for the OmniVision
-	  OV7670 VGA camera.  It currently only works with the M88ALP01
-	  controller.
-
-config VIDEO_VS6624
-	tristate "ST VS6624 sensor support"
-	depends on VIDEO_V4L2 && I2C
-	depends on MEDIA_CAMERA_SUPPORT
-	---help---
-	  This is a Video4Linux2 sensor-level driver for the ST VS6624
-	  camera.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called vs6624.
-
-config VIDEO_MT9M032
-	tristate "MT9M032 camera sensor support"
-	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
-	depends on MEDIA_CAMERA_SUPPORT
-	select VIDEO_APTINA_PLL
-	---help---
-	  This driver supports MT9M032 camera sensors from Aptina, monochrome
-	  models only.
-
-config VIDEO_MT9P031
-	tristate "Aptina MT9P031 support"
-	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
-	depends on MEDIA_CAMERA_SUPPORT
-	select VIDEO_APTINA_PLL
-	---help---
-	  This is a Video4Linux2 sensor-level driver for the Aptina
-	  (Micron) mt9p031 5 Mpixel camera.
-
-config VIDEO_MT9T001
-	tristate "Aptina MT9T001 support"
-	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
-	depends on MEDIA_CAMERA_SUPPORT
-	---help---
-	  This is a Video4Linux2 sensor-level driver for the Aptina
-	  (Micron) mt0t001 3 Mpixel camera.
-
-config VIDEO_MT9V011
-	tristate "Micron mt9v011 sensor support"
-	depends on I2C && VIDEO_V4L2
-	depends on MEDIA_CAMERA_SUPPORT
-	---help---
-	  This is a Video4Linux2 sensor-level driver for the Micron
-	  mt0v011 1.3 Mpixel camera.  It currently only works with the
-	  em28xx driver.
-
-config VIDEO_MT9V032
-	tristate "Micron MT9V032 sensor support"
-	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
-	depends on MEDIA_CAMERA_SUPPORT
-	---help---
-	  This is a Video4Linux2 sensor-level driver for the Micron
-	  MT9V032 752x480 CMOS sensor.
-
-config VIDEO_TCM825X
-	tristate "TCM825x camera sensor support"
-	depends on I2C && VIDEO_V4L2
-	depends on MEDIA_CAMERA_SUPPORT
-	---help---
-	  This is a driver for the Toshiba TCM825x VGA camera sensor.
-	  It is used for example in Nokia N800.
-
-config VIDEO_SR030PC30
-	tristate "Siliconfile SR030PC30 sensor support"
-	depends on I2C && VIDEO_V4L2
-	depends on MEDIA_CAMERA_SUPPORT
-	---help---
-	  This driver supports SR030PC30 VGA camera from Siliconfile
-
-config VIDEO_NOON010PC30
-	tristate "Siliconfile NOON010PC30 sensor support"
-	depends on I2C && VIDEO_V4L2 && EXPERIMENTAL && VIDEO_V4L2_SUBDEV_API
-	depends on MEDIA_CAMERA_SUPPORT
-	---help---
-	  This driver supports NOON010PC30 CIF camera from Siliconfile
-
-source "drivers/media/video/m5mols/Kconfig"
-
-config VIDEO_S5K6AA
-	tristate "Samsung S5K6AAFX sensor support"
-	depends on MEDIA_CAMERA_SUPPORT
-	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
-	---help---
-	  This is a V4L2 sensor-level driver for Samsung S5K6AA(FX) 1.3M
-	  camera sensor with an embedded SoC image signal processor.
-
-source "drivers/media/video/smiapp/Kconfig"
-
-comment "Flash devices"
-
-config VIDEO_ADP1653
-	tristate "ADP1653 flash support"
-	depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
-	depends on MEDIA_CAMERA_SUPPORT
-	---help---
-	  This is a driver for the ADP1653 flash controller. It is used for
-	  example in Nokia N900.
-
-config VIDEO_AS3645A
-	tristate "AS3645A flash driver support"
-	depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
-	depends on MEDIA_CAMERA_SUPPORT
-	---help---
-	  This is a driver for the AS3645A and LM3555 flash controllers. It has
-	  build in control for flash, torch and indicator LEDs.
-
-comment "Video improvement chips"
-
-config VIDEO_UPD64031A
-	tristate "NEC Electronics uPD64031A Ghost Reduction"
-	depends on VIDEO_V4L2 && I2C
-	---help---
-	  Support for the NEC Electronics uPD64031A Ghost Reduction
-	  video chip. It is most often found in NTSC TV cards made for
-	  Japan and is used to reduce the 'ghosting' effect that can
-	  be present in analog TV broadcasts.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called upd64031a.
-
-config VIDEO_UPD64083
-	tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation"
-	depends on VIDEO_V4L2 && I2C
-	---help---
-	  Support for the NEC Electronics uPD64083 3-Dimensional Y/C
-	  separation video chip. It is used to improve the quality of
-	  the colors of a composite signal.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called upd64083.
-
-comment "Miscelaneous helper chips"
-
-config VIDEO_THS7303
-	tristate "THS7303 Video Amplifier"
-	depends on I2C
-	help
-	  Support for TI THS7303 video amplifier
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called ths7303.
-
-config VIDEO_M52790
-	tristate "Mitsubishi M52790 A/V switch"
-	depends on VIDEO_V4L2 && I2C
-	---help---
-	 Support for the Mitsubishi M52790 A/V switch.
-
-	 To compile this driver as a module, choose M here: the
-	 module will be called m52790.
-
-endmenu # encoder / decoder chips
+if MEDIA_CAMERA_SUPPORT
 
 config VIDEO_VIVI
 	tristate "Virtual Video Driver"
@@ -877,7 +303,6 @@ source "drivers/media/video/s5p-fimc/Kconfig"
 source "drivers/media/video/s5p-tv/Kconfig"
 
 endif # V4L_PLATFORM_DRIVERS
-endif # VIDEO_CAPTURE_DRIVERS
 
 menuconfig V4L_MEM2MEM_DRIVERS
 	bool "Memory-to-memory multimedia devices"
@@ -955,3 +380,5 @@ config VIDEO_MX2_EMMAPRP
 	    conversion.
 
 endif # V4L_MEM2MEM_DRIVERS
+
+endif # MEDIA_CAMERA_SUPPORT