[media] rename drivers/media/video as .../platform

The remaining drivers are mostly platform drivers. Name the
dir to reflect it.

It makes sense to latter break it into a few other dirs.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

1 files changed, 0 insertions, 297 deletions

diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
deleted file mode 100644
index 28b25bf3580501..00000000000000
--- a/drivers/media/video/Kconfig
+++ /dev/null
@@ -1,297 +0,0 @@
-if MEDIA_CAMERA_SUPPORT
-
-config VIDEO_VIVI
-	tristate "Virtual Video Driver"
-	depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64
-	depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE
-	select FONT_8x16
-	select VIDEOBUF2_VMALLOC
-	default n
-	---help---
-	  Enables a virtual video driver. This device shows a color bar
-	  and a timestamp, as a real device would generate by using V4L2
-	  api.
-	  Say Y here if you want to test video apps or debug V4L devices.
-	  In doubt, say N.
-
-#
-# Platform drivers
-#	All drivers here are currently for webcam support
-
-menuconfig V4L_PLATFORM_DRIVERS
-	bool "V4L platform devices"
-	depends on MEDIA_CAMERA_SUPPORT
-	default n
-	---help---
-	  Say Y here to enable support for platform-specific V4L drivers.
-
-if V4L_PLATFORM_DRIVERS
-
-source "drivers/media/video/marvell-ccic/Kconfig"
-
-config VIDEO_VIA_CAMERA
-	tristate "VIAFB camera controller support"
-	depends on FB_VIA
-	select VIDEOBUF_DMA_SG
-	select VIDEO_OV7670
-	help
-	   Driver support for the integrated camera controller in VIA
-	   Chrome9 chipsets.  Currently only tested on OLPC xo-1.5 systems
-	   with ov7670 sensors.
-
-#
-# Platform multimedia device configuration
-#
-
-source "drivers/media/video/davinci/Kconfig"
-
-source "drivers/media/video/omap/Kconfig"
-
-source "drivers/media/video/blackfin/Kconfig"
-
-config VIDEO_SH_VOU
-	tristate "SuperH VOU video output driver"
-	depends on VIDEO_DEV && ARCH_SHMOBILE
-	select VIDEOBUF_DMA_CONTIG
-	help
-	  Support for the Video Output Unit (VOU) on SuperH SoCs.
-
-config VIDEO_VIU
-	tristate "Freescale VIU Video Driver"
-	depends on VIDEO_V4L2 && PPC_MPC512x
-	select VIDEOBUF_DMA_CONTIG
-	default y
-	---help---
-	  Support for Freescale VIU video driver. This device captures
-	  video data, or overlays video on DIU frame buffer.
-
-	  Say Y here if you want to enable VIU device on MPC5121e Rev2+.
-	  In doubt, say N.
-
-config VIDEO_TIMBERDALE
-	tristate "Support for timberdale Video In/LogiWIN"
-	depends on VIDEO_V4L2 && I2C && DMADEVICES
-	select DMA_ENGINE
-	select TIMB_DMA
-	select VIDEO_ADV7180
-	select VIDEOBUF_DMA_CONTIG
-	---help---
-	  Add support for the Video In peripherial of the timberdale FPGA.
-
-config VIDEO_VINO
-	tristate "SGI Vino Video For Linux"
-	depends on I2C && SGI_IP22 && VIDEO_V4L2
-	select VIDEO_SAA7191 if VIDEO_HELPER_CHIPS_AUTO
-	help
-	  Say Y here to build in support for the Vino video input system found
-	  on SGI Indy machines.
-
-config VIDEO_M32R_AR
-	tristate "AR devices"
-	depends on M32R && VIDEO_V4L2
-	---help---
-	  This is a video4linux driver for the Renesas AR (Artificial Retina)
-	  camera module.
-
-config VIDEO_M32R_AR_M64278
-	tristate "AR device with color module M64278(VGA)"
-	depends on PLAT_M32700UT
-	select VIDEO_M32R_AR
-	---help---
-	  This is a video4linux driver for the Renesas AR (Artificial
-	  Retina) with M64278E-800 camera module.
-	  This module supports VGA(640x480 pixels) resolutions.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called arv.
-
-config VIDEO_OMAP3
-	tristate "OMAP 3 Camera support (EXPERIMENTAL)"
-	depends on OMAP_IOVMM && VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API && ARCH_OMAP3 && EXPERIMENTAL
-	---help---
-	  Driver for an OMAP 3 camera controller.
-
-config VIDEO_OMAP3_DEBUG
-	bool "OMAP 3 Camera debug messages"
-	depends on VIDEO_OMAP3
-	---help---
-	  Enable debug messages on OMAP 3 camera controller driver.
-
-config SOC_CAMERA
-	tristate "SoC camera support"
-	depends on VIDEO_V4L2 && HAS_DMA && I2C
-	select VIDEOBUF_GEN
-	select VIDEOBUF2_CORE
-	help
-	  SoC Camera is a common API to several cameras, not connecting
-	  over a bus like PCI or USB. For example some i2c camera connected
-	  directly to the data bus of an SoC.
-
-
-config SOC_CAMERA_PLATFORM
-	tristate "platform camera support"
-	depends on SOC_CAMERA
-	help
-	  This is a generic SoC camera platform driver, useful for testing
-
-config MX1_VIDEO
-	bool
-
-config VIDEO_MX1
-	tristate "i.MX1/i.MXL CMOS Sensor Interface driver"
-	depends on VIDEO_DEV && ARCH_MX1 && SOC_CAMERA
-	select FIQ
-	select VIDEOBUF_DMA_CONTIG
-	select MX1_VIDEO
-	---help---
-	  This is a v4l2 driver for the i.MX1/i.MXL CMOS Sensor Interface
-
-config MX3_VIDEO
-	bool
-
-config VIDEO_MX3
-	tristate "i.MX3x Camera Sensor Interface driver"
-	depends on VIDEO_DEV && MX3_IPU && SOC_CAMERA
-	select VIDEOBUF2_DMA_CONTIG
-	select MX3_VIDEO
-	---help---
-	  This is a v4l2 driver for the i.MX3x Camera Sensor Interface
-
-config VIDEO_PXA27x
-	tristate "PXA27x Quick Capture Interface driver"
-	depends on VIDEO_DEV && PXA27x && SOC_CAMERA
-	select VIDEOBUF_DMA_SG
-	---help---
-	  This is a v4l2 driver for the PXA27x Quick Capture Interface
-
-config VIDEO_SH_MOBILE_CSI2
-	tristate "SuperH Mobile MIPI CSI-2 Interface driver"
-	depends on VIDEO_DEV && SOC_CAMERA && HAVE_CLK
-	---help---
-	  This is a v4l2 driver for the SuperH MIPI CSI-2 Interface
-
-config VIDEO_SH_MOBILE_CEU
-	tristate "SuperH Mobile CEU Interface driver"
-	depends on VIDEO_DEV && SOC_CAMERA && HAS_DMA && HAVE_CLK
-	select VIDEOBUF2_DMA_CONTIG
-	---help---
-	  This is a v4l2 driver for the SuperH Mobile CEU Interface
-
-config VIDEO_OMAP1
-	tristate "OMAP1 Camera Interface driver"
-	depends on VIDEO_DEV && ARCH_OMAP1 && SOC_CAMERA
-	select VIDEOBUF_DMA_CONTIG
-	select VIDEOBUF_DMA_SG
-	---help---
-	  This is a v4l2 driver for the TI OMAP1 camera interface
-
-config VIDEO_OMAP2
-	tristate "OMAP2 Camera Capture Interface driver"
-	depends on VIDEO_DEV && ARCH_OMAP2
-	select VIDEOBUF_DMA_SG
-	---help---
-	  This is a v4l2 driver for the TI OMAP2 camera capture interface
-
-config VIDEO_MX2_HOSTSUPPORT
-	bool
-
-config VIDEO_MX2
-	tristate "i.MX27/i.MX25 Camera Sensor Interface driver"
-	depends on VIDEO_DEV && SOC_CAMERA && (MACH_MX27 || (ARCH_MX25 && BROKEN))
-	select VIDEOBUF2_DMA_CONTIG
-	select VIDEO_MX2_HOSTSUPPORT
-	---help---
-	  This is a v4l2 driver for the i.MX27 and the i.MX25 Camera Sensor
-	  Interface
-
-config VIDEO_ATMEL_ISI
-	tristate "ATMEL Image Sensor Interface (ISI) support"
-	depends on VIDEO_DEV && SOC_CAMERA && ARCH_AT91
-	select VIDEOBUF2_DMA_CONTIG
-	---help---
-	  This module makes the ATMEL Image Sensor Interface available
-	  as a v4l2 device.
-
-source "drivers/media/video/s5p-fimc/Kconfig"
-source "drivers/media/video/s5p-tv/Kconfig"
-
-endif # V4L_PLATFORM_DRIVERS
-
-menuconfig V4L_MEM2MEM_DRIVERS
-	bool "Memory-to-memory multimedia devices"
-	depends on VIDEO_V4L2
-	default n
-	---help---
-	  Say Y here to enable selecting drivers for V4L devices that
-	  use system memory for both source and destination buffers, as opposed
-	  to capture and output drivers, which use memory buffers for just
-	  one of those.
-
-if V4L_MEM2MEM_DRIVERS
-
-config VIDEO_MEM2MEM_TESTDEV
-	tristate "Virtual test device for mem2mem framework"
-	depends on VIDEO_DEV && VIDEO_V4L2
-	select VIDEOBUF2_VMALLOC
-	select V4L2_MEM2MEM_DEV
-	default n
-	---help---
-	  This is a virtual test device for the memory-to-memory driver
-	  framework.
-
-config VIDEO_CODA
-	tristate "Chips&Media Coda multi-standard codec IP"
-	depends on VIDEO_DEV && VIDEO_V4L2
-	select VIDEOBUF2_DMA_CONTIG
-	select V4L2_MEM2MEM_DEV
-	---help---
-	   Coda is a range of video codec IPs that supports
-	   H.264, MPEG-4, and other video formats.
-
-config VIDEO_MEM2MEM_DEINTERLACE
-	tristate "Deinterlace support"
-	depends on VIDEO_DEV && VIDEO_V4L2 && DMA_ENGINE
-	select VIDEOBUF2_DMA_CONTIG
-	select V4L2_MEM2MEM_DEV
-	help
-	    Generic deinterlacing V4L2 driver.
-
-config VIDEO_SAMSUNG_S5P_G2D
-	tristate "Samsung S5P and EXYNOS4 G2D 2d graphics accelerator driver"
-	depends on VIDEO_DEV && VIDEO_V4L2 && PLAT_S5P
-	select VIDEOBUF2_DMA_CONTIG
-	select V4L2_MEM2MEM_DEV
-	default n
-	---help---
-	  This is a v4l2 driver for Samsung S5P and EXYNOS4 G2D
-	  2d graphics accelerator.
-
-config VIDEO_SAMSUNG_S5P_JPEG
-	tristate "Samsung S5P/Exynos4 JPEG codec driver (EXPERIMENTAL)"
-	depends on VIDEO_DEV && VIDEO_V4L2 && PLAT_S5P && EXPERIMENTAL
-	select VIDEOBUF2_DMA_CONTIG
-	select V4L2_MEM2MEM_DEV
-	---help---
-	  This is a v4l2 driver for Samsung S5P and EXYNOS4 JPEG codec
-
-config VIDEO_SAMSUNG_S5P_MFC
-	tristate "Samsung S5P MFC 5.1 Video Codec"
-	depends on VIDEO_DEV && VIDEO_V4L2 && PLAT_S5P
-	select VIDEOBUF2_DMA_CONTIG
-	default n
-	help
-	    MFC 5.1 driver for V4L2.
-
-config VIDEO_MX2_EMMAPRP
-	tristate "MX2 eMMa-PrP support"
-	depends on VIDEO_DEV && VIDEO_V4L2 && SOC_IMX27
-	select VIDEOBUF2_DMA_CONTIG
-	select V4L2_MEM2MEM_DEV
-	help
-	    MX2X chips have a PrP that can be used to process buffers from
-	    memory to memory. Operations include resizing and format
-	    conversion.
-
-endif # V4L_MEM2MEM_DRIVERS
-
-endif # MEDIA_CAMERA_SUPPORT