iio: pressure: mprls0025pa add SPI driver

Add SPI component of the driver.

Tested-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Link: https://lore.kernel.org/r/20231229092445.30180-11-petre.rodan@subdimension.ro
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

3 files changed, 100 insertions, 1 deletions

diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig
index f03007cfec85de..5da7931dc537a9 100644
--- a/drivers/iio/pressure/Kconfig
+++ b/drivers/iio/pressure/Kconfig
@@ -181,8 +181,9 @@ config MPL3115
 
 config MPRLS0025PA
 	tristate "Honeywell MPRLS0025PA (MicroPressure sensors series)"
-	depends on I2C
+	depends on (I2C || SPI_MASTER)
 	select MPRLS0025PA_I2C if I2C
+	select MPRLS0025PA_SPI if SPI_MASTER
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
 	help
@@ -198,6 +199,11 @@ config MPRLS0025PA_I2C
 	depends on MPRLS0025PA
 	depends on I2C
 
+config MPRLS0025PA_SPI
+	tristate
+	depends on MPRLS0025PA
+	depends on SPI_MASTER
+
 config MS5611
 	tristate "Measurement Specialties MS5611 pressure sensor driver"
 	select IIO_BUFFER
diff --git a/drivers/iio/pressure/Makefile b/drivers/iio/pressure/Makefile
index 7754135e190cc3..a93709e357607d 100644
--- a/drivers/iio/pressure/Makefile
+++ b/drivers/iio/pressure/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_MPL115_SPI) += mpl115_spi.o
 obj-$(CONFIG_MPL3115) += mpl3115.o
 obj-$(CONFIG_MPRLS0025PA) += mprls0025pa.o
 obj-$(CONFIG_MPRLS0025PA_I2C) += mprls0025pa_i2c.o
+obj-$(CONFIG_MPRLS0025PA_SPI) += mprls0025pa_spi.o
 obj-$(CONFIG_MS5611) += ms5611_core.o
 obj-$(CONFIG_MS5611_I2C) += ms5611_i2c.o
 obj-$(CONFIG_MS5611_SPI) += ms5611_spi.o
diff --git a/drivers/iio/pressure/mprls0025pa_spi.c b/drivers/iio/pressure/mprls0025pa_spi.c
new file mode 100644
index 00000000000000..3aed14cd95c5ab
--- /dev/null
+++ b/drivers/iio/pressure/mprls0025pa_spi.c
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * MPRLS0025PA - Honeywell MicroPressure MPR series SPI sensor driver
+ *
+ * Copyright (c) 2024 Petre Rodan <petre.rodan@subdimension.ro>
+ *
+ * Data sheet:
+ *  https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/micropressure-mpr-series/documents/sps-siot-mpr-series-datasheet-32332628-ciid-172626.pdf
+ */
+
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/spi/spi.h>
+#include <linux/stddef.h>
+#include <linux/types.h>
+
+#include "mprls0025pa.h"
+
+struct mpr_spi_buf {
+	u8 tx[MPR_MEASUREMENT_RD_SIZE] __aligned(IIO_DMA_MINALIGN);
+};
+
+static int mpr_spi_init(struct device *dev)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	struct mpr_spi_buf *buf;
+
+	buf = devm_kzalloc(dev, sizeof(*buf), GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	spi_set_drvdata(spi, buf);
+
+	return 0;
+}
+
+static int mpr_spi_xfer(struct mpr_data *data, const u8 cmd, const u8 pkt_len)
+{
+	struct spi_device *spi = to_spi_device(data->dev);
+	struct mpr_spi_buf *buf = spi_get_drvdata(spi);
+	struct spi_transfer xfer;
+
+	if (pkt_len > MPR_MEASUREMENT_RD_SIZE)
+		return -EOVERFLOW;
+
+	buf->tx[0] = cmd;
+	xfer.tx_buf = buf->tx;
+	xfer.rx_buf = data->buffer;
+	xfer.len = pkt_len;
+
+	return spi_sync_transfer(spi, &xfer, 1);
+}
+
+static const struct mpr_ops mpr_spi_ops = {
+	.init = mpr_spi_init,
+	.read = mpr_spi_xfer,
+	.write = mpr_spi_xfer,
+};
+
+static int mpr_spi_probe(struct spi_device *spi)
+{
+	return mpr_common_probe(&spi->dev, &mpr_spi_ops, spi->irq);
+}
+
+static const struct of_device_id mpr_spi_match[] = {
+	{ .compatible = "honeywell,mprls0025pa" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, mpr_spi_match);
+
+static const struct spi_device_id mpr_spi_id[] = {
+	{ "mprls0025pa" },
+	{}
+};
+MODULE_DEVICE_TABLE(spi, mpr_spi_id);
+
+static struct spi_driver mpr_spi_driver = {
+	.driver = {
+		.name = "mprls0025pa",
+		.of_match_table = mpr_spi_match,
+	},
+	.probe = mpr_spi_probe,
+	.id_table = mpr_spi_id,
+};
+module_spi_driver(mpr_spi_driver);
+
+MODULE_AUTHOR("Petre Rodan <petre.rodan@subdimension.ro>");
+MODULE_DESCRIPTION("Honeywell MPR pressure sensor spi driver");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(IIO_HONEYWELL_MPRLS0025PA);