Merge tag 'soc-fixes-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
 "There are a lot of minor DT fixes for Mediatek, Rockchip, Qualcomm and
  Microchip and NXP, addressing both build-time warnings and bugs found
  during runtime testing.

  Most of these changes are machine specific fixups, but there are a few
  notable regressions that affect an entire SoC:

   - The Qualcomm MSI support that was improved for 6.9 ended up being
     wrong on some chips and now gets fixed.

   - The i.MX8MP camera interface broke due to a typo and gets updated
     again.

  The main driver fix is also for Qualcomm platforms, rewriting an
  interface in the QSEECOM firmware support that could lead to crashing
  the kernel from a trusted application.

  The only other code changes are minor fixes for Mediatek SoC drivers"

* tag 'soc-fixes-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (50 commits)
  ARM: dts: imx6ull-tarragon: fix USB over-current polarity
  soc: mediatek: mtk-socinfo: depends on CONFIG_SOC_BUS
  soc: mediatek: mtk-svs: Append "-thermal" to thermal zone names
  arm64: dts: imx8mp: Fix assigned-clocks for second CSI2
  ARM: dts: microchip: at91-sama7g54_curiosity: Replace regulator-suspend-voltage with the valid property
  ARM: dts: microchip: at91-sama7g5ek: Replace regulator-suspend-voltage with the valid property
  arm64: dts: rockchip: Fix USB interface compatible string on kobol-helios64
  arm64: dts: qcom: sc8180x: Fix ss_phy_irq for secondary USB controller
  arm64: dts: qcom: sm8650: Fix the msi-map entries
  arm64: dts: qcom: sm8550: Fix the msi-map entries
  arm64: dts: qcom: sm8450: Fix the msi-map entries
  arm64: dts: qcom: sc8280xp: add missing PCIe minimum OPP
  arm64: dts: qcom: x1e80100: Fix the compatible for cluster idle states
  arm64: dts: qcom: Fix type of "wdog" IRQs for remoteprocs
  arm64: dts: rockchip: regulator for sd needs to be always on for BPI-R2Pro
  dt-bindings: rockchip: grf: Add missing type to 'pcie-phy' node
  arm64: dts: rockchip: drop redundant disable-gpios in Lubancat 2
  arm64: dts: rockchip: drop redundant disable-gpios in Lubancat 1
  arm64: dts: rockchip: drop redundant pcie-reset-suspend in Scarlet Dumo
  arm64: dts: rockchip: mark system power controller and fix typo on orangepi-5-plus
  ...

1 files changed, 6 insertions, 31 deletions

diff --git a/drivers/firmware/qcom/qcom_scm.c b/drivers/firmware/qcom/qcom_scm.c
index 520de9b5633abc..90283f160a2286 100644
--- a/drivers/firmware/qcom/qcom_scm.c
+++ b/drivers/firmware/qcom/qcom_scm.c
@@ -1576,9 +1576,9 @@ EXPORT_SYMBOL_GPL(qcom_scm_qseecom_app_get_id);
 /**
  * qcom_scm_qseecom_app_send() - Send to and receive data from a given QSEE app.
  * @app_id:   The ID of the target app.
- * @req:      Request buffer sent to the app (must be DMA-mappable).
+ * @req:      DMA address of the request buffer sent to the app.
  * @req_size: Size of the request buffer.
- * @rsp:      Response buffer, written to by the app (must be DMA-mappable).
+ * @rsp:      DMA address of the response buffer, written to by the app.
  * @rsp_size: Size of the response buffer.
  *
  * Sends a request to the QSEE app associated with the given ID and read back
@@ -1589,33 +1589,13 @@ EXPORT_SYMBOL_GPL(qcom_scm_qseecom_app_get_id);
  *
  * Return: Zero on success, nonzero on failure.
  */
-int qcom_scm_qseecom_app_send(u32 app_id, void *req, size_t req_size, void *rsp,
-			      size_t rsp_size)
+int qcom_scm_qseecom_app_send(u32 app_id, dma_addr_t req, size_t req_size,
+			      dma_addr_t rsp, size_t rsp_size)
 {
 	struct qcom_scm_qseecom_resp res = {};
 	struct qcom_scm_desc desc = {};
-	dma_addr_t req_phys;
-	dma_addr_t rsp_phys;
 	int status;
 
-	/* Map request buffer */
-	req_phys = dma_map_single(__scm->dev, req, req_size, DMA_TO_DEVICE);
-	status = dma_mapping_error(__scm->dev, req_phys);
-	if (status) {
-		dev_err(__scm->dev, "qseecom: failed to map request buffer\n");
-		return status;
-	}
-
-	/* Map response buffer */
-	rsp_phys = dma_map_single(__scm->dev, rsp, rsp_size, DMA_FROM_DEVICE);
-	status = dma_mapping_error(__scm->dev, rsp_phys);
-	if (status) {
-		dma_unmap_single(__scm->dev, req_phys, req_size, DMA_TO_DEVICE);
-		dev_err(__scm->dev, "qseecom: failed to map response buffer\n");
-		return status;
-	}
-
-	/* Set up SCM call data */
 	desc.owner = QSEECOM_TZ_OWNER_TZ_APPS;
 	desc.svc = QSEECOM_TZ_SVC_APP_ID_PLACEHOLDER;
 	desc.cmd = QSEECOM_TZ_CMD_APP_SEND;
@@ -1623,18 +1603,13 @@ int qcom_scm_qseecom_app_send(u32 app_id, void *req, size_t req_size, void *rsp,
 				     QCOM_SCM_RW, QCOM_SCM_VAL,
 				     QCOM_SCM_RW, QCOM_SCM_VAL);
 	desc.args[0] = app_id;
-	desc.args[1] = req_phys;
+	desc.args[1] = req;
 	desc.args[2] = req_size;
-	desc.args[3] = rsp_phys;
+	desc.args[3] = rsp;
 	desc.args[4] = rsp_size;
 
-	/* Perform call */
 	status = qcom_scm_qseecom_call(&desc, &res);
 
-	/* Unmap buffers */
-	dma_unmap_single(__scm->dev, rsp_phys, rsp_size, DMA_FROM_DEVICE);
-	dma_unmap_single(__scm->dev, req_phys, req_size, DMA_TO_DEVICE);
-
 	if (status)
 		return status;