diff options
| author | Tony Lindgren <tony@atomide.com> | 2023-08-04 13:38:01 +0300 |
|---|---|---|
| committer | Tony Lindgren <tony@atomide.com> | 2023-08-10 09:21:45 +0300 |
| commit | 03a711d3cb83692733f865312f49e665c49de6de (patch) | |
| tree | 71a0188ce23bd93c2b84e544a8a67dceb258e318 /drivers/bus | |
| parent | 063dc0622705623b3a70739b9f33d5ea019882e6 (diff) | |
| download | linux-03a711d3cb83692733f865312f49e665c49de6de.tar.gz | |
bus: ti-sysc: Configure uart quirks for k3 SoC
Enable the uart quirks similar to the earlier SoCs. Let's assume we are
likely going to need a k3 specific quirk mask separate from the earlier
SoCs, so let's not start changing the revision register mask at this point.
Note that SYSC_QUIRK_LEGACY_IDLE will be needed until we can remove the
need for pm_runtime_irq_safe() from 8250_omap driver.
Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Diffstat (limited to 'drivers/bus')
| -rw-r--r-- | drivers/bus/ti-sysc.c | 2 |
1 files changed, 2 insertions, 0 deletions
diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c index e9bc3894a1ec5..2e983e9492d96 100644 --- a/drivers/bus/ti-sysc.c +++ b/drivers/bus/ti-sysc.c @@ -1525,6 +1525,8 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = { SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE), SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x47422e03, 0xffffffff, SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE), + SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x47424e03, 0xffffffff, + SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE), /* Quirks that need to be set based on the module address */ SYSC_QUIRK("mcpdm", 0x40132000, 0, 0x10, -ENODEV, 0x50000800, 0xffffffff, |