ata: pata_parport: Fix on26 module code indentation and style

Fix the header, indentation and coding style in the on26 pata parport
protocol module to suppress warnings from smatch and other static code
analyzers.

No functional changes.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>

1 files changed, 217 insertions, 197 deletions

diff --git a/drivers/ata/pata_parport/on26.c b/drivers/ata/pata_parport/on26.c
index dc47a54b121ff..5da317b394c18 100644
--- a/drivers/ata/pata_parport/on26.c
+++ b/drivers/ata/pata_parport/on26.c
@@ -1,11 +1,10 @@
-/* 
-        on26.c    (c) 1997-8  Grant R. Guenther <grant@torque.net>
-                              Under the terms of the GNU General Public License.
-
-        on26.c is a low-level protocol driver for the 
-        OnSpec 90c26 parallel to IDE adapter chip.
-
-*/
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * (c) 1997-1998  Grant R. Guenther <grant@torque.net>
+ *
+ * on26.c is a low-level protocol driver for the
+ * OnSpec 90c26 parallel to IDE adapter chip.
+ */
 
 #include <linux/module.h>
 #include <linux/init.h>
@@ -16,260 +15,281 @@
 #include <asm/io.h>
 #include "pata_parport.h"
 
-/* mode codes:  0  nybble reads, 8-bit writes
-                1  8-bit reads and writes
-                2  8-bit EPP mode
-		3  EPP-16
-		4  EPP-32
-*/
+/*
+ * mode codes:  0  nybble reads, 8-bit writes
+ *		1  8-bit reads and writes
+ *		2  8-bit EPP mode
+ *		3  EPP-16
+ *		4  EPP-32
+ */
 
-#define j44(a,b)  (((a>>4)&0x0f)|(b&0xf0))
+#define j44(a, b)	(((a >> 4) & 0x0f) | (b & 0xf0))
 
-#define P1	w2(5);w2(0xd);w2(5);w2(0xd);w2(5);w2(4);
-#define P2	w2(5);w2(7);w2(5);w2(4);
+#define P1						      \
+	do {						      \
+		w2(5); w2(0xd); w2(5); w2(0xd); w2(5); w2(4); \
+	} while (0)
 
-/* cont = 0 - access the IDE register file 
-   cont = 1 - access the IDE command set 
-*/
-
-static int on26_read_regr(struct pi_adapter *pi, int cont, int regr)
+#define P2					\
+	do {					\
+		w2(5); w2(7); w2(5); w2(4);	\
+	} while (0)
 
-{       int     a, b, r;
+/*
+ * cont = 0 - access the IDE register file
+ * cont = 1 - access the IDE command set
+ */
 
-	r = (regr<<2) + 1 + cont;
+static int on26_read_regr(struct pi_adapter *pi, int cont, int regr)
+{
+	int a, b, r;
 
-        switch (pi->mode)  {
+	r = (regr << 2) + 1 + cont;
 
-        case 0: w0(1); P1; w0(r); P2; w0(0); P1; 
+	switch (pi->mode) {
+	case 0:
+		w0(1); P1; w0(r); P2; w0(0); P1;
 		w2(6); a = r1(); w2(4);
 		w2(6); b = r1(); w2(4);
 		w2(6); w2(4); w2(6); w2(4);
-                return j44(a,b);
-
-        case 1: w0(1); P1; w0(r); P2; w0(0); P1;
+		return j44(a, b);
+	case 1:
+		w0(1); P1; w0(r); P2; w0(0); P1;
 		w2(0x26); a = r0(); w2(4); w2(0x26); w2(4);
-                return a;
-
+		return a;
 	case 2:
 	case 3:
-        case 4: w3(1); w3(1); w2(5); w4(r); w2(4);
+	case 4:
+		w3(1); w3(1); w2(5); w4(r); w2(4);
 		w3(0); w3(0); w2(0x24); a = r4(); w2(4);
 		w2(0x24); (void)r4(); w2(4);
-                return a;
+		return a;
+	}
 
-        }
-        return -1;
-}       
+	return -1;
+}
 
 static void on26_write_regr(struct pi_adapter *pi, int cont, int regr, int val)
+{
+	int r = (regr << 2) + 1 + cont;
 
-{       int  r;
-
-        r = (regr<<2) + 1 + cont;
-
-        switch (pi->mode)  {
-
-        case 0:
-        case 1: w0(1); P1; w0(r); P2; w0(0); P1;
+	switch (pi->mode) {
+	case 0:
+	case 1:
+		w0(1); P1; w0(r); P2; w0(0); P1;
 		w0(val); P2; w0(val); P2;
 		break;
-
 	case 2:
 	case 3:
-        case 4: w3(1); w3(1); w2(5); w4(r); w2(4);
-		w3(0); w3(0); 
+	case 4:
+		w3(1); w3(1); w2(5); w4(r); w2(4);
+		w3(0); w3(0);
 		w2(5); w4(val); w2(4);
 		w2(5); w4(val); w2(4);
-                break;
-        }
+		break;
+	}
 }
 
-#define  CCP(x)  w0(0xfe);w0(0xaa);w0(0x55);w0(0);w0(0xff);\
-		 w0(0x87);w0(0x78);w0(x);w2(4);w2(5);w2(4);w0(0xff);
+#define CCP(x)						\
+	do {						\
+		w0(0xfe); w0(0xaa); w0(0x55); w0(0);	\
+		w0(0xff); w0(0x87); w0(0x78); w0(x);	\
+		w2(4); w2(5); w2(4); w0(0xff);		\
+	} while (0)
 
 static void on26_connect(struct pi_adapter *pi)
-
-{       int	x;
+{
+	int x;
 
 	pi->saved_r0 = r0();
-        pi->saved_r2 = r2();
+	pi->saved_r2 = r2();
 
-        CCP(0x20);
-	x = 8; if (pi->mode) x = 9;
+	CCP(0x20);
+	if (pi->mode)
+		x = 9;
+	else
+		x = 8;
 
 	w0(2); P1; w0(8); P2;
 	w0(2); P1; w0(x); P2;
 }
 
 static void on26_disconnect(struct pi_adapter *pi)
-
-{       if (pi->mode >= 2) { w3(4); w3(4); w3(4); w3(4); }
-	              else { w0(4); P1; w0(4); P1; }
+{
+	if (pi->mode >= 2) {
+		w3(4); w3(4); w3(4); w3(4);
+	} else {
+		w0(4); P1; w0(4); P1;
+	}
 	CCP(0x30);
-        w0(pi->saved_r0);
-        w2(pi->saved_r2);
-} 
+	w0(pi->saved_r0);
+	w2(pi->saved_r2);
+}
 
 #define	RESET_WAIT  200
 
-static int on26_test_port(struct pi_adapter *pi)  /* hard reset */
+/* hard reset */
+static int on26_test_port(struct pi_adapter *pi)
+{
+	int i, m, d, x = 0, y = 0;
 
-{       int     i, m, d, x=0, y=0;
-
-        pi->saved_r0 = r0();
-        pi->saved_r2 = r2();
-
-        d = pi->delay;
-        m = pi->mode;
-        pi->delay = 5;
-        pi->mode = 0;
-
-        w2(0xc);
-
-        CCP(0x30); CCP(0); 
-
-        w0(0xfe);w0(0xaa);w0(0x55);w0(0);w0(0xff);
-        i = ((r1() & 0xf0) << 4); w0(0x87);
-        i |= (r1() & 0xf0); w0(0x78);
-        w0(0x20);w2(4);w2(5);
-        i |= ((r1() & 0xf0) >> 4);
-        w2(4);w0(0xff);
-
-        if (i == 0xb5f) {
-
-            w0(2); P1; w0(0);   P2;
-            w0(3); P1; w0(0);   P2;
-            w0(2); P1; w0(8);   P2; udelay(100);
-            w0(2); P1; w0(0xa); P2; udelay(100);
-            w0(2); P1; w0(8);   P2; udelay(1000);
-            
-            on26_write_regr(pi,0,6,0xa0);
-
-            for (i=0;i<RESET_WAIT;i++) {
-                on26_write_regr(pi,0,6,0xa0);
-                x = on26_read_regr(pi,0,7);
-                on26_write_regr(pi,0,6,0xb0);
-                y = on26_read_regr(pi,0,7);
-                if (!((x&0x80)||(y&0x80))) break;
-                mdelay(100);
-            }
-
-	    if (i == RESET_WAIT) 
-		dev_err(&pi->dev, "on26: Device reset failed (%x,%x)\n", x, y);
-
-            w0(4); P1; w0(4); P1;
-        }
+	pi->saved_r0 = r0();
+	pi->saved_r2 = r2();
+
+	d = pi->delay;
+	m = pi->mode;
+	pi->delay = 5;
+	pi->mode = 0;
+
+	w2(0xc);
+
+	CCP(0x30); CCP(0);
+
+	w0(0xfe); w0(0xaa); w0(0x55); w0(0); w0(0xff);
+	i = ((r1() & 0xf0) << 4); w0(0x87);
+	i |= (r1() & 0xf0); w0(0x78);
+	w0(0x20); w2(4); w2(5);
+	i |= ((r1() & 0xf0) >> 4);
+	w2(4); w0(0xff);
+
+	if (i == 0xb5f) {
+		w0(2); P1; w0(0);   P2;
+		w0(3); P1; w0(0);   P2;
+		w0(2); P1; w0(8);   P2; udelay(100);
+		w0(2); P1; w0(0xa); P2; udelay(100);
+		w0(2); P1; w0(8);   P2; udelay(1000);
+
+		on26_write_regr(pi, 0, 6, 0xa0);
+
+		for (i = 0; i < RESET_WAIT; i++) {
+			on26_write_regr(pi, 0, 6, 0xa0);
+			x = on26_read_regr(pi, 0, 7);
+			on26_write_regr(pi, 0, 6, 0xb0);
+			y = on26_read_regr(pi, 0, 7);
+			if (!((x & 0x80) || (y & 0x80)))
+				break;
+			mdelay(100);
+		}
+
+		if (i == RESET_WAIT)
+			dev_err(&pi->dev,
+				"on26: Device reset failed (%x,%x)\n", x, y);
+
+		w0(4); P1; w0(4); P1;
+	}
 
-        CCP(0x30);
+	CCP(0x30);
 
-        pi->delay = d;
-        pi->mode = m;
-        w0(pi->saved_r0);
-        w2(pi->saved_r2);
+	pi->delay = d;
+	pi->mode = m;
+	w0(pi->saved_r0);
+	w2(pi->saved_r2);
 
-        return 5;
+	return 5;
 }
 
-
 static void on26_read_block(struct pi_adapter *pi, char *buf, int count)
+{
+	int k, a, b;
 
-{       int     k, a, b;
-
-        switch (pi->mode) {
-
-        case 0: w0(1); P1; w0(1); P2; w0(2); P1; w0(0x18); P2; w0(0); P1;
+	switch (pi->mode) {
+	case 0:
+		w0(1); P1; w0(1); P2; w0(2); P1; w0(0x18); P2; w0(0); P1;
 		udelay(10);
-		for (k=0;k<count;k++) {
-                        w2(6); a = r1();
-                        w2(4); b = r1();
-                        buf[k] = j44(a,b);
-                }
-		w0(2); P1; w0(8); P2; 
-                break;
-
-        case 1: w0(1); P1; w0(1); P2; w0(2); P1; w0(0x19); P2; w0(0); P1;
+		for (k = 0; k < count; k++) {
+			w2(6); a = r1();
+			w2(4); b = r1();
+			buf[k] = j44(a, b);
+		}
+		w0(2); P1; w0(8); P2;
+		break;
+	case 1:
+		w0(1); P1; w0(1); P2; w0(2); P1; w0(0x19); P2; w0(0); P1;
+		udelay(10);
+		for (k = 0; k < count / 2; k++) {
+			w2(0x26); buf[2 * k] = r0();
+			w2(0x24); buf[2 * k + 1] = r0();
+		}
+		w0(2); P1; w0(9); P2;
+		break;
+	case 2:
+		w3(1); w3(1); w2(5); w4(1); w2(4);
+		w3(0); w3(0); w2(0x24);
+		udelay(10);
+		for (k = 0; k < count; k++)
+			buf[k] = r4();
+		w2(4);
+		break;
+	case 3:
+		w3(1); w3(1); w2(5); w4(1); w2(4);
+		w3(0); w3(0); w2(0x24);
 		udelay(10);
-                for (k=0;k<count/2;k++) {
-                        w2(0x26); buf[2*k] = r0();  
-			w2(0x24); buf[2*k+1] = r0();
-                }
-                w0(2); P1; w0(9); P2;
-                break;
-
-        case 2: w3(1); w3(1); w2(5); w4(1); w2(4);
+		for (k = 0; k < count / 2; k++)
+			((u16 *)buf)[k] = r4w();
+		w2(4);
+		break;
+	case 4:
+		w3(1); w3(1); w2(5); w4(1); w2(4);
 		w3(0); w3(0); w2(0x24);
 		udelay(10);
-                for (k=0;k<count;k++) buf[k] = r4();
-                w2(4);
-                break;
-
-        case 3: w3(1); w3(1); w2(5); w4(1); w2(4);
-                w3(0); w3(0); w2(0x24);
-                udelay(10);
-                for (k=0;k<count/2;k++) ((u16 *)buf)[k] = r4w();
-                w2(4);
-                break;
-
-        case 4: w3(1); w3(1); w2(5); w4(1); w2(4);
-                w3(0); w3(0); w2(0x24);
-                udelay(10);
-                for (k=0;k<count/4;k++) ((u32 *)buf)[k] = r4l();
-                w2(4);
-                break;
-
-        }
+		for (k = 0; k < count / 4; k++)
+			((u32 *)buf)[k] = r4l();
+		w2(4);
+		break;
+	}
 }
 
 static void on26_write_block(struct pi_adapter *pi, char *buf, int count)
-
-{       int	k;
-
-        switch (pi->mode) {
-
-        case 0: 
-        case 1: w0(1); P1; w0(1); P2; 
-		w0(2); P1; w0(0x18+pi->mode); P2; w0(0); P1;
+{
+	int k;
+
+	switch (pi->mode) {
+	case 0:
+	case 1:
+		w0(1); P1; w0(1); P2;
+		w0(2); P1; w0(0x18 + pi->mode); P2; w0(0); P1;
 		udelay(10);
-		for (k=0;k<count/2;k++) {
-                        w2(5); w0(buf[2*k]); 
-			w2(7); w0(buf[2*k+1]);
-                }
-                w2(5); w2(4);
-		w0(2); P1; w0(8+pi->mode); P2;
-                break;
-
-        case 2: w3(1); w3(1); w2(5); w4(1); w2(4);
+		for (k = 0; k < count / 2; k++) {
+			w2(5); w0(buf[2 * k]);
+			w2(7); w0(buf[2 * k + 1]);
+		}
+		w2(5); w2(4);
+		w0(2); P1; w0(8 + pi->mode); P2;
+		break;
+	case 2:
+		w3(1); w3(1); w2(5); w4(1); w2(4);
 		w3(0); w3(0); w2(0xc5);
 		udelay(10);
-                for (k=0;k<count;k++) w4(buf[k]);
+		for (k = 0; k < count; k++)
+			w4(buf[k]);
 		w2(0xc4);
-                break;
-
-        case 3: w3(1); w3(1); w2(5); w4(1); w2(4);
-                w3(0); w3(0); w2(0xc5);
-                udelay(10);
-                for (k=0;k<count/2;k++) w4w(((u16 *)buf)[k]);
-                w2(0xc4);
-                break;
-
-        case 4: w3(1); w3(1); w2(5); w4(1); w2(4);
-                w3(0); w3(0); w2(0xc5);
-                udelay(10);
-                for (k=0;k<count/4;k++) w4l(((u32 *)buf)[k]);
-                w2(0xc4);
-                break;
-
-        }
-
+		break;
+	case 3:
+		w3(1); w3(1); w2(5); w4(1); w2(4);
+		w3(0); w3(0); w2(0xc5);
+		udelay(10);
+		for (k = 0; k < count / 2; k++)
+			w4w(((u16 *)buf)[k]);
+		w2(0xc4);
+		break;
+	case 4:
+		w3(1); w3(1); w2(5); w4(1); w2(4);
+		w3(0); w3(0); w2(0xc5);
+		udelay(10);
+		for (k = 0; k < count / 4; k++)
+			w4l(((u32 *)buf)[k]);
+		w2(0xc4);
+		break;
+	}
 }
 
 static void on26_log_adapter(struct pi_adapter *pi)
+{
+	char *mode_string[5] = { "4-bit", "8-bit", "EPP-8", "EPP-16", "EPP-32" };
 
-{       char    *mode_string[5] = {"4-bit","8-bit","EPP-8",
-				   "EPP-16","EPP-32"};
-
-	dev_info(&pi->dev, "OnSpec 90c26 at 0x%x, mode %d (%s), delay %d\n",
-		pi->port, pi->mode, mode_string[pi->mode], pi->delay);
+	dev_info(&pi->dev,
+		 "OnSpec 90c26 at 0x%x, mode %d (%s), delay %d\n",
+		 pi->port, pi->mode, mode_string[pi->mode], pi->delay);
 }
 
 static struct pi_protocol on26 = {