ata: pata_parport: Fix epat module code indentation and style

Fix the header, indentation and coding style in the epat pata parport
protocol module to suppress warnings from smatch and other static code
analyzers.

No functional changes.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>

1 files changed, 178 insertions, 142 deletions

diff --git a/drivers/ata/pata_parport/epat.c b/drivers/ata/pata_parport/epat.c
index b146999368ae8..016bd96bce899 100644
--- a/drivers/ata/pata_parport/epat.c
+++ b/drivers/ata/pata_parport/epat.c
@@ -1,13 +1,12 @@
-/* 
-        epat.c  (c) 1997-8  Grant R. Guenther <grant@torque.net>
-                            Under the terms of the GNU General Public License.
-
-	This is the low level protocol driver for the EPAT parallel
-        to IDE adapter from Shuttle Technologies.  This adapter is
-        used in many popular parallel port disk products such as the
-        SyQuest EZ drives, the Avatar Shark and the Imation SuperDisk.
-	
-*/
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * (c) 1997-1998  Grant R. Guenther <grant@torque.net>
+ *
+ * This is the low level protocol driver for the EPAT parallel
+ * to IDE adapter from Shuttle Technologies.  This adapter is
+ * used in many popular parallel port disk products such as the
+ * SyQuest EZ drives, the Avatar Shark and the Imation SuperDisk.
+ */
 
 #include <linux/module.h>
 #include <linux/init.h>
@@ -18,276 +17,313 @@
 #include <asm/io.h>
 #include "pata_parport.h"
 
-#define j44(a,b)		(((a>>4)&0x0f)+(b&0xf0))
-#define j53(a,b)		(((a>>3)&0x1f)+((b<<4)&0xe0))
+#define j44(a, b)	(((a >> 4) & 0x0f) + (b & 0xf0))
+#define j53(a, b)	(((a >> 3) & 0x1f) + ((b << 4) & 0xe0))
 
 static int epatc8;
 
 module_param(epatc8, int, 0);
-MODULE_PARM_DESC(epatc8, "support for the Shuttle EP1284 chip, "
-	"used in any recent Imation SuperDisk (LS-120) drive.");
-
-/* cont =  0   IDE register file
-   cont =  1   IDE control registers
-   cont =  2   internal EPAT registers
-*/
-
+MODULE_PARM_DESC(epatc8,
+		 "support for the Shuttle EP1284 chip, "
+		 "used in any recent Imation SuperDisk (LS-120) drive.");
+
+/*
+ * cont =  0   IDE register file
+ * cont =  1   IDE control registers
+ * cont =  2   internal EPAT registers
+ */
 static int cont_map[3] = { 0x18, 0x10, 0 };
 
 static void epat_write_regr(struct pi_adapter *pi, int cont, int regr, int val)
-
-{	int r;
-
-	r = regr + cont_map[cont];
+{
+	int r = regr + cont_map[cont];
 
 	switch (pi->mode) {
-
 	case 0:
 	case 1:
-	case 2:	w0(0x60+r); w2(1); w0(val); w2(4);
+	case 2:
+		w0(0x60+r); w2(1); w0(val); w2(4);
 		break;
-
 	case 3:
 	case 4:
-	case 5: w3(0x40+r); w4(val);
+	case 5:
+		w3(0x40+r); w4(val);
 		break;
-
 	}
 }
 
 static int epat_read_regr(struct pi_adapter *pi, int cont, int regr)
-
-{	int  a, b, r;
+{
+	int  a, b, r;
 
 	r = regr + cont_map[cont];
 
 	switch (pi->mode) {
 
-	case 0:	w0(r); w2(1); w2(3); 
+	case 0:
+		w0(r); w2(1); w2(3);
 		a = r1(); w2(4); b = r1();
-		return j44(a,b);
-
-	case 1: w0(0x40+r); w2(1); w2(4);
+		return j44(a, b);
+	case 1:
+		w0(0x40+r); w2(1); w2(4);
 		a = r1(); b = r2(); w0(0xff);
-		return j53(a,b);
-
-	case 2: w0(0x20+r); w2(1); w2(0x25);
+		return j53(a, b);
+	case 2:
+		w0(0x20+r); w2(1); w2(0x25);
 		a = r0(); w2(4);
 		return a;
-
 	case 3:
 	case 4:
-	case 5: w3(r); w2(0x24); a = r4(); w2(4);
+	case 5:
+		w3(r); w2(0x24); a = r4(); w2(4);
 		return a;
-
 	}
+
 	return -1;	/* never gets here */
 }
 
 static void epat_read_block(struct pi_adapter *pi, char *buf, int count)
-
-{	int  k, ph, a, b;
+{
+	int  k, ph, a, b;
 
 	switch (pi->mode) {
 
-	case 0:	w0(7); w2(1); w2(3); w0(0xff);
+	case 0:
+		w0(7); w2(1); w2(3); w0(0xff);
 		ph = 0;
-		for(k=0;k<count;k++) {
-			if (k == count-1) w0(0xfd);
-			w2(6+ph); a = r1();
-			if (a & 8) b = a; 
-			  else { w2(4+ph); b = r1(); }
-			buf[k] = j44(a,b);
+		for (k = 0; k < count; k++) {
+			if (k == count-1)
+				w0(0xfd);
+			w2(6 + ph); a = r1();
+			if (a & 8) {
+				b = a;
+			} else {
+				w2(4+ph); b = r1();
+			}
+			buf[k] = j44(a, b);
 			ph =  1 - ph;
 		}
 		w0(0); w2(4);
 		break;
 
-	case 1: w0(0x47); w2(1); w2(5); w0(0xff);
+	case 1:
+		w0(0x47); w2(1); w2(5); w0(0xff);
 		ph = 0;
-		for(k=0;k<count;k++) {
-			if (k == count-1) w0(0xfd); 
-			w2(4+ph);
+		for (k = 0; k < count; k++) {
+			if (k == count - 1)
+				w0(0xfd);
+			w2(4 + ph);
 			a = r1(); b = r2();
-			buf[k] = j53(a,b);
+			buf[k] = j53(a, b);
 			ph = 1 - ph;
 		}
 		w0(0); w2(4);
 		break;
 
-	case 2: w0(0x27); w2(1); w2(0x25); w0(0);
+	case 2:
+		w0(0x27); w2(1); w2(0x25); w0(0);
 		ph = 0;
-		for(k=0;k<count-1;k++) {
-			w2(0x24+ph);
+		for (k = 0; k < count - 1; k++) {
+			w2(0x24 + ph);
 			buf[k] = r0();
 			ph = 1 - ph;
 		}
-		w2(0x26); w2(0x27); buf[count-1] = r0(); 
+		w2(0x26); w2(0x27);
+		buf[count - 1] = r0();
 		w2(0x25); w2(4);
 		break;
 
-	case 3: w3(0x80); w2(0x24);
-		for(k=0;k<count-1;k++) buf[k] = r4();
-		w2(4); w3(0xa0); w2(0x24); buf[count-1] = r4();
+	case 3:
+		w3(0x80); w2(0x24);
+		for (k = 0; k < count - 1; k++)
+			buf[k] = r4();
+		w2(4); w3(0xa0); w2(0x24);
+		buf[count - 1] = r4();
 		w2(4);
 		break;
 
-	case 4: w3(0x80); w2(0x24);
-		for(k=0;k<(count/2)-1;k++) ((u16 *)buf)[k] = r4w();
-		buf[count-2] = r4();
-		w2(4); w3(0xa0); w2(0x24); buf[count-1] = r4();
+	case 4:
+		w3(0x80); w2(0x24);
+		for (k = 0; k < count / 2 - 1; k++)
+			((u16 *)buf)[k] = r4w();
+		buf[count - 2] = r4();
+		w2(4); w3(0xa0); w2(0x24);
+		buf[count - 1] = r4();
 		w2(4);
 		break;
 
-	case 5: w3(0x80); w2(0x24);
-		for(k=0;k<(count/4)-1;k++) ((u32 *)buf)[k] = r4l();
-		for(k=count-4;k<count-1;k++) buf[k] = r4();
-		w2(4); w3(0xa0); w2(0x24); buf[count-1] = r4();
+	case 5:
+		w3(0x80); w2(0x24);
+		for (k = 0; k < count / 4 - 1; k++)
+			((u32 *)buf)[k] = r4l();
+		for (k = count - 4; k < count - 1; k++)
+			buf[k] = r4();
+		w2(4); w3(0xa0); w2(0x24);
+		buf[count - 1] = r4();
 		w2(4);
 		break;
-
 	}
 }
 
 static void epat_write_block(struct pi_adapter *pi, char *buf, int count)
-
-{	int ph, k;
+{
+	int ph, k;
 
 	switch (pi->mode) {
-
 	case 0:
 	case 1:
-	case 2: w0(0x67); w2(1); w2(5);
+	case 2:
+		w0(0x67); w2(1); w2(5);
 		ph = 0;
-		for(k=0;k<count;k++) {
+		for (k = 0; k < count; k++) {
 		  	w0(buf[k]);
-			w2(4+ph);
+			w2(4 + ph);
 			ph = 1 - ph;
 		}
 		w2(7); w2(4);
 		break;
-
-	case 3: w3(0xc0); 
-		for(k=0;k<count;k++) w4(buf[k]);
+	case 3:
+		w3(0xc0);
+		for (k = 0; k < count; k++)
+			w4(buf[k]);
 		w2(4);
 		break;
-
-	case 4: w3(0xc0); 
-		for(k=0;k<(count/2);k++) w4w(((u16 *)buf)[k]);
+	case 4:
+		w3(0xc0);
+		for (k = 0; k < count / 2; k++)
+			w4w(((u16 *)buf)[k]);
 		w2(4);
 		break;
-
-	case 5: w3(0xc0); 
-		for(k=0;k<(count/4);k++) w4l(((u32 *)buf)[k]);
+	case 5:
+		w3(0xc0);
+		for (k = 0; k < count / 4; k++)
+			w4l(((u32 *)buf)[k]);
 		w2(4);
 		break;
-
 	}
 }
 
 /* these macros access the EPAT registers in native addressing */
 
-#define	WR(r,v)		epat_write_regr(pi,2,r,v)
-#define	RR(r)		(epat_read_regr(pi,2,r))
+#define	WR(r, v)	epat_write_regr(pi, 2, r, v)
+#define	RR(r)		epat_read_regr(pi, 2, r)
 
 /* and these access the IDE task file */
 
-#define WRi(r,v)         epat_write_regr(pi,0,r,v)
-#define RRi(r)           (epat_read_regr(pi,0,r))
+#define WRi(r, v)	epat_write_regr(pi, 0, r, v)
+#define RRi(r)		epat_read_regr(pi, 0, r)
 
 /* FIXME:  the CPP stuff should be fixed to handle multiple EPATs on a chain */
 
-#define CPP(x) 	w2(4);w0(0x22);w0(0xaa);w0(0x55);w0(0);w0(0xff);\
-                w0(0x87);w0(0x78);w0(x);w2(4);w2(5);w2(4);w0(0xff);
+#define CPP(x)					\
+	do {					\
+		w2(4); w0(0x22); w0(0xaa);	\
+		w0(0x55); w0(0); w0(0xff);	\
+		w0(0x87); w0(0x78); w0(x);	\
+		w2(4); w2(5); w2(4); w0(0xff);	\
+	} while (0)
 
 static void epat_connect(struct pi_adapter *pi)
-
-{       pi->saved_r0 = r0();
-        pi->saved_r2 = r2();
+{
+	pi->saved_r0 = r0();
+	pi->saved_r2 = r2();
 
  	/* Initialize the chip */
 	CPP(0);
 
 	if (epatc8) {
-		CPP(0x40);CPP(0xe0);
-		w0(0);w2(1);w2(4);
-		WR(0x8,0x12);WR(0xc,0x14);WR(0x12,0x10);
-		WR(0xe,0xf);WR(0xf,4);
+		CPP(0x40); CPP(0xe0);
+		w0(0); w2(1); w2(4);
+		WR(0x8, 0x12);
+		WR(0xc, 0x14);
+		WR(0x12, 0x10);
+		WR(0xe, 0xf);
+		WR(0xf, 4);
 		/* WR(0xe,0xa);WR(0xf,4); */
-		WR(0xe,0xd);WR(0xf,0);
+		WR(0xe, 0xd);
+		WR(0xf, 0);
 		/* CPP(0x30); */
 	}
 
         /* Connect to the chip */
 	CPP(0xe0);
-        w0(0);w2(1);w2(4); /* Idle into SPP */
+	w0(0); w2(1); w2(4); /* Idle into SPP */
         if (pi->mode >= 3) {
-          w0(0);w2(1);w2(4);w2(0xc);
-          /* Request EPP */
-          w0(0x40);w2(6);w2(7);w2(4);w2(0xc);w2(4);
+		w0(0); w2(1); w2(4); w2(0xc);
+		/* Request EPP */
+		w0(0x40); w2(6); w2(7); w2(4); w2(0xc); w2(4);
         }
 
 	if (!epatc8) {
-		WR(8,0x10); WR(0xc,0x14); WR(0xa,0x38); WR(0x12,0x10);
+		WR(8, 0x10);
+		WR(0xc, 0x14);
+		WR(0xa, 0x38);
+		WR(0x12, 0x10);
 	}
 }
 
 static void epat_disconnect(struct pi_adapter *pi)
-{	CPP(0x30);
+{
+	CPP(0x30);
 	w0(pi->saved_r0);
 	w2(pi->saved_r2);
 }
 
 static int epat_test_proto(struct pi_adapter *pi)
-
-{       int     k, j, f, cc;
-	int	e[2] = {0,0};
+{
+	int k, j, f, cc;
+	int e[2] = { 0, 0 };
 	char scratch[512];
 
-        epat_connect(pi);
+	epat_connect(pi);
 	cc = RR(0xd);
 	epat_disconnect(pi);
 
 	epat_connect(pi);
 	for (j=0;j<2;j++) {
-  	    WRi(6,0xa0+j*0x10);
-            for (k=0;k<256;k++) {
-                WRi(2,k^0xaa);
-                WRi(3,k^0x55);
-                if (RRi(2) != (k^0xaa)) e[j]++;
-                }
-	    }
-        epat_disconnect(pi);
-
-        f = 0;
-        epat_connect(pi);
-        WR(0x13,1); WR(0x13,0); WR(0xa,0x11);
-        epat_read_block(pi,scratch,512);
-	
-        for (k=0;k<256;k++) {
-            if ((scratch[2*k] & 0xff) != k) f++;
-            if ((scratch[2*k+1] & 0xff) != (0xff-k)) f++;
-        }
-        epat_disconnect(pi);
+		WRi(6, 0xa0 + j * 0x10);
+		for (k = 0; k < 256; k++) {
+			WRi(2, k ^ 0xaa);
+			WRi(3, k ^ 0x55);
+			if (RRi(2) != (k ^ 0xaa))
+				e[j]++;
+		}
+	}
+	epat_disconnect(pi);
 
-	dev_dbg(&pi->dev, "epat: port 0x%x, mode %d, ccr %x, test=(%d,%d,%d)\n",
-	       pi->port, pi->mode, cc, e[0], e[1], f);
-	
-        return (e[0] && e[1]) || f;
+	f = 0;
+	epat_connect(pi);
+	WR(0x13, 1); WR(0x13, 0); WR(0xa, 0x11);
+	epat_read_block(pi, scratch, 512);
+
+	for (k = 0; k < 256; k++) {
+		if ((scratch[2 * k] & 0xff) != k)
+			f++;
+		if ((scratch[2 * k + 1] & 0xff) != 0xff - k)
+			f++;
+	}
+	epat_disconnect(pi);
+
+	dev_dbg(&pi->dev,
+		"epat: port 0x%x, mode %d, ccr %x, test=(%d,%d,%d)\n",
+		pi->port, pi->mode, cc, e[0], e[1], f);
+
+	return (e[0] && e[1]) || f;
 }
 
 static void epat_log_adapter(struct pi_adapter *pi)
-
-{	int	ver;
-        char    *mode_string[6] = 
-		   {"4-bit","5/3","8-bit","EPP-8","EPP-16","EPP-32"};
+{
+	int ver;
+	char *mode_string[6] =
+		{ "4-bit", "5/3", "8-bit", "EPP-8", "EPP-16", "EPP-32" };
 
 	epat_connect(pi);
-	WR(0xa,0x38);		/* read the version code */
-        ver = RR(0xb);
-        epat_disconnect(pi);
+	WR(0xa, 0x38);		/* read the version code */
+	ver = RR(0xb);
+	epat_disconnect(pi);
 
-	dev_info(&pi->dev, "Shuttle EPAT chip %x at 0x%x, mode %d (%s), delay %d\n",
+	dev_info(&pi->dev,
+		 "Shuttle EPAT chip %x at 0x%x, mode %d (%s), delay %d\n",
 		 ver, pi->port, pi->mode, mode_string[pi->mode], pi->delay);
 }