Merge tag 'ata-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata

Pull ata updates from Damien Le Moal:

 - Add support for the .remove_new callback to the ata_platform code to
   simplify device removal interface (Uwe)

 - Code simplification in ata_dev_revalidate() (Yahu)

 - Fix code indentation and coding style in the pata_parport protocol
   modules to avoid warnings from static code analyzers (me)

 - Clarify ata_eh_qc_retry() behavior with better comments (Niklas)

 - Simplify and improve ata_change_queue_depth() behavior to have a
   consistent behavior between libsas managed devices and libata managed
   devices (e.g. AHCI connected devices) (me)

 - Cleanup libata-scsi and libata-eh code to use the ata_ncq_enabled()
   and ata_ncq_supported() helpers instead of open coding flags tests
   (me)

 - Cleanup ahci_reset_controller() code (me)

 - Change the pata_octeon_cf and sata_svw drivers to use
   of_property_read_reg() to simplify the code (Rob, me)

 - Remove unnecessary include files from ahci_octeon driver (me)

 - Modify the DesignWare ahci dt bindings to add support for the
   Rockchip RK3588 AHCI (Sebastian)

* tag 'ata-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: (29 commits)
  dt-bindings: phy: rockchip: rk3588 has two reset lines
  dt-bindings: ata: dwc-ahci: add Rockchip RK3588
  dt-bindings: ata: dwc-ahci: add PHY clocks
  ata: ahci_octeon: Remove unnecessary include
  ata: pata_octeon_cf: Add missing header include
  ata: ahci: Cleanup ahci_reset_controller()
  ata: Use of_property_read_reg() to parse "reg"
  ata: libata-scsi: Use ata_ncq_supported in ata_scsi_dev_config()
  ata: libata-eh: Use ata_ncq_enabled() in ata_eh_speed_down()
  ata: libata-sata: Improve ata_change_queue_depth()
  ata: libata-sata: Simplify ata_change_queue_depth()
  ata: libata-eh: Clarify ata_eh_qc_retry() behavior at call site
  ata: pata_parport: Fix on26 module code indentation and style
  ata: pata_parport: Fix on20 module code indentation and style
  ata: pata_parport: Fix ktti module code indentation and style
  ata: pata_parport: Fix kbic module code indentation and style
  ata: pata_parport: Fix friq module code indentation and style
  ata: pata_parport: Fix fit3 module code indentation and style
  ata: pata_parport: Fix fit2 module code indentation and style
  ata: pata_parport: Fix epia module code indentation and style
  ...

42 files changed, 2141 insertions, 1915 deletions

diff --git a/drivers/ata/ahci_brcm.c b/drivers/ata/ahci_brcm.c
index 4e3dc2b6d67f8..70c3a33eee6f2 100644
--- a/drivers/ata/ahci_brcm.c
+++ b/drivers/ata/ahci_brcm.c
@@ -544,7 +544,7 @@ out_reset:
 	return ret;
 }
 
-static int brcm_ahci_remove(struct platform_device *pdev)
+static void brcm_ahci_remove(struct platform_device *pdev)
 {
 	struct ata_host *host = dev_get_drvdata(&pdev->dev);
 	struct ahci_host_priv *hpriv = host->private_data;
@@ -552,7 +552,7 @@ static int brcm_ahci_remove(struct platform_device *pdev)
 
 	brcm_sata_phys_disable(priv);
 
-	return ata_platform_remove_one(pdev);
+	ata_platform_remove_one(pdev);
 }
 
 static void brcm_ahci_shutdown(struct platform_device *pdev)
@@ -573,7 +573,7 @@ static SIMPLE_DEV_PM_OPS(ahci_brcm_pm_ops, brcm_ahci_suspend, brcm_ahci_resume);
 
 static struct platform_driver brcm_ahci_driver = {
 	.probe = brcm_ahci_probe,
-	.remove = brcm_ahci_remove,
+	.remove_new = brcm_ahci_remove,
 	.shutdown = brcm_ahci_shutdown,
 	.driver = {
 		.name = DRV_NAME,
diff --git a/drivers/ata/ahci_ceva.c b/drivers/ata/ahci_ceva.c
index bc027468decb9..c2b6be083af43 100644
--- a/drivers/ata/ahci_ceva.c
+++ b/drivers/ata/ahci_ceva.c
@@ -369,7 +369,7 @@ MODULE_DEVICE_TABLE(of, ceva_ahci_of_match);
 
 static struct platform_driver ceva_ahci_driver = {
 	.probe = ceva_ahci_probe,
-	.remove = ata_platform_remove_one,
+	.remove_new = ata_platform_remove_one,
 	.driver = {
 		.name = DRV_NAME,
 		.of_match_table = ceva_ahci_of_match,
diff --git a/drivers/ata/ahci_da850.c b/drivers/ata/ahci_da850.c
index ca0924dc5bd26..55a6627d5450e 100644
--- a/drivers/ata/ahci_da850.c
+++ b/drivers/ata/ahci_da850.c
@@ -238,7 +238,7 @@ MODULE_DEVICE_TABLE(of, ahci_da850_of_match);
 
 static struct platform_driver ahci_da850_driver = {
 	.probe = ahci_da850_probe,
-	.remove = ata_platform_remove_one,
+	.remove_new = ata_platform_remove_one,
 	.driver = {
 		.name = DRV_NAME,
 		.of_match_table = ahci_da850_of_match,
diff --git a/drivers/ata/ahci_dm816.c b/drivers/ata/ahci_dm816.c
index b08547b877a1f..4cb70064fb994 100644
--- a/drivers/ata/ahci_dm816.c
+++ b/drivers/ata/ahci_dm816.c
@@ -182,7 +182,7 @@ MODULE_DEVICE_TABLE(of, ahci_dm816_of_match);
 
 static struct platform_driver ahci_dm816_driver = {
 	.probe = ahci_dm816_probe,
-	.remove = ata_platform_remove_one,
+	.remove_new = ata_platform_remove_one,
 	.driver = {
 		.name = AHCI_DM816_DRV_NAME,
 		.of_match_table = ahci_dm816_of_match,
diff --git a/drivers/ata/ahci_dwc.c b/drivers/ata/ahci_dwc.c
index 4bfbb09cdc029..9604a2f6ed489 100644
--- a/drivers/ata/ahci_dwc.c
+++ b/drivers/ata/ahci_dwc.c
@@ -478,7 +478,7 @@ MODULE_DEVICE_TABLE(of, ahci_dwc_of_match);
 
 static struct platform_driver ahci_dwc_driver = {
 	.probe = ahci_dwc_probe,
-	.remove = ata_platform_remove_one,
+	.remove_new = ata_platform_remove_one,
 	.shutdown = ahci_platform_shutdown,
 	.driver = {
 		.name = DRV_NAME,
diff --git a/drivers/ata/ahci_imx.c b/drivers/ata/ahci_imx.c
index 3a8c248e7c0e8..9fa005965f3b2 100644
--- a/drivers/ata/ahci_imx.c
+++ b/drivers/ata/ahci_imx.c
@@ -1223,7 +1223,7 @@ static SIMPLE_DEV_PM_OPS(ahci_imx_pm_ops, imx_ahci_suspend, imx_ahci_resume);
 
 static struct platform_driver imx_ahci_driver = {
 	.probe = imx_ahci_probe,
-	.remove = ata_platform_remove_one,
+	.remove_new = ata_platform_remove_one,
 	.driver = {
 		.name = DRV_NAME,
 		.of_match_table = imx_ahci_of_match,
diff --git a/drivers/ata/ahci_mtk.c b/drivers/ata/ahci_mtk.c
index 0bf83a2970912..5083fb6c49277 100644
--- a/drivers/ata/ahci_mtk.c
+++ b/drivers/ata/ahci_mtk.c
@@ -173,7 +173,7 @@ MODULE_DEVICE_TABLE(of, ahci_of_match);
 
 static struct platform_driver mtk_ahci_driver = {
 	.probe = mtk_ahci_probe,
-	.remove = ata_platform_remove_one,
+	.remove_new = ata_platform_remove_one,
 	.driver = {
 		.name = DRV_NAME,
 		.of_match_table = ahci_of_match,
diff --git a/drivers/ata/ahci_mvebu.c b/drivers/ata/ahci_mvebu.c
index 596cf017f4279..7645015185823 100644
--- a/drivers/ata/ahci_mvebu.c
+++ b/drivers/ata/ahci_mvebu.c
@@ -245,7 +245,7 @@ MODULE_DEVICE_TABLE(of, ahci_mvebu_of_match);
 
 static struct platform_driver ahci_mvebu_driver = {
 	.probe = ahci_mvebu_probe,
-	.remove = ata_platform_remove_one,
+	.remove_new = ata_platform_remove_one,
 	.suspend = ahci_mvebu_suspend,
 	.resume = ahci_mvebu_resume,
 	.driver = {
diff --git a/drivers/ata/ahci_octeon.c b/drivers/ata/ahci_octeon.c
index 5021ab3ede490..e89807fa928e4 100644
--- a/drivers/ata/ahci_octeon.c
+++ b/drivers/ata/ahci_octeon.c
@@ -16,7 +16,6 @@
 #include <linux/of_platform.h>
 
 #include <asm/octeon/octeon.h>
-#include <asm/bitfield.h>
 
 #define CVMX_SATA_UCTL_SHIM_CFG		0xE8
 
diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
index 299ee686ac49a..ab30c7138d73b 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -96,7 +96,7 @@ MODULE_DEVICE_TABLE(acpi, ahci_acpi_match);
 
 static struct platform_driver ahci_driver = {
 	.probe = ahci_probe,
-	.remove = ata_platform_remove_one,
+	.remove_new = ata_platform_remove_one,
 	.shutdown = ahci_platform_shutdown,
 	.driver = {
 		.name = DRV_NAME,
diff --git a/drivers/ata/ahci_qoriq.c b/drivers/ata/ahci_qoriq.c
index 0ba764d283c86..3d01b118c9a1a 100644
--- a/drivers/ata/ahci_qoriq.c
+++ b/drivers/ata/ahci_qoriq.c
@@ -359,7 +359,7 @@ static SIMPLE_DEV_PM_OPS(ahci_qoriq_pm_ops, ahci_platform_suspend,
 
 static struct platform_driver ahci_qoriq_driver = {
 	.probe = ahci_qoriq_probe,
-	.remove = ata_platform_remove_one,
+	.remove_new = ata_platform_remove_one,
 	.driver = {
 		.name = DRV_NAME,
 		.of_match_table = ahci_qoriq_of_match,
diff --git a/drivers/ata/ahci_seattle.c b/drivers/ata/ahci_seattle.c
index 9eda7bbd21513..2c32d58c6ae75 100644
--- a/drivers/ata/ahci_seattle.c
+++ b/drivers/ata/ahci_seattle.c
@@ -187,7 +187,7 @@ MODULE_DEVICE_TABLE(acpi, ahci_acpi_match);
 
 static struct platform_driver ahci_seattle_driver = {
 	.probe = ahci_seattle_probe,
-	.remove = ata_platform_remove_one,
+	.remove_new = ata_platform_remove_one,
 	.driver = {
 		.name = DRV_NAME,
 		.acpi_match_table = ahci_acpi_match,
diff --git a/drivers/ata/ahci_st.c b/drivers/ata/ahci_st.c
index f2c1edb369861..d4a626f87963b 100644
--- a/drivers/ata/ahci_st.c
+++ b/drivers/ata/ahci_st.c
@@ -239,7 +239,7 @@ static struct platform_driver st_ahci_driver = {
 		.of_match_table = st_ahci_match,
 	},
 	.probe = st_ahci_probe,
-	.remove = ata_platform_remove_one,
+	.remove_new = ata_platform_remove_one,
 };
 module_platform_driver(st_ahci_driver);
 
diff --git a/drivers/ata/ahci_sunxi.c b/drivers/ata/ahci_sunxi.c
index 076c12b4ba08b..04531fa95e404 100644
--- a/drivers/ata/ahci_sunxi.c
+++ b/drivers/ata/ahci_sunxi.c
@@ -292,7 +292,7 @@ MODULE_DEVICE_TABLE(of, ahci_sunxi_of_match);
 
 static struct platform_driver ahci_sunxi_driver = {
 	.probe = ahci_sunxi_probe,
-	.remove = ata_platform_remove_one,
+	.remove_new = ata_platform_remove_one,
 	.driver = {
 		.name = DRV_NAME,
 		.of_match_table = ahci_sunxi_of_match,
diff --git a/drivers/ata/ahci_tegra.c b/drivers/ata/ahci_tegra.c
index 8e5e2b359f2d2..21c20793e5177 100644
--- a/drivers/ata/ahci_tegra.c
+++ b/drivers/ata/ahci_tegra.c
@@ -609,7 +609,7 @@ deinit_controller:
 
 static struct platform_driver tegra_ahci_driver = {
 	.probe = tegra_ahci_probe,
-	.remove = ata_platform_remove_one,
+	.remove_new = ata_platform_remove_one,
 	.driver = {
 		.name = DRV_NAME,
 		.of_match_table = tegra_ahci_of_match,
diff --git a/drivers/ata/ahci_xgene.c b/drivers/ata/ahci_xgene.c
index 83f5ff54ef5b9..eb773f2e28fcb 100644
--- a/drivers/ata/ahci_xgene.c
+++ b/drivers/ata/ahci_xgene.c
@@ -868,7 +868,7 @@ disable_resources:
 
 static struct platform_driver xgene_ahci_driver = {
 	.probe = xgene_ahci_probe,
-	.remove = ata_platform_remove_one,
+	.remove_new = ata_platform_remove_one,
 	.driver = {
 		.name = DRV_NAME,
 		.of_match_table = xgene_ahci_of_match,
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index 9c2cb6cbea762..06aec35f88f2c 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -975,44 +975,43 @@ int ahci_reset_controller(struct ata_host *host)
 	void __iomem *mmio = hpriv->mmio;
 	u32 tmp;
 
-	/* we must be in AHCI mode, before using anything
-	 * AHCI-specific, such as HOST_RESET.
+	/*
+	 * We must be in AHCI mode, before using anything AHCI-specific, such
+	 * as HOST_RESET.
 	 */
 	ahci_enable_ahci(mmio);
 
-	/* global controller reset */
-	if (!ahci_skip_host_reset) {
-		tmp = readl(mmio + HOST_CTL);
-		if ((tmp & HOST_RESET) == 0) {
-			writel(tmp | HOST_RESET, mmio + HOST_CTL);
-			readl(mmio + HOST_CTL); /* flush */
-		}
+	/* Global controller reset */
+	if (ahci_skip_host_reset) {
+		dev_info(host->dev, "Skipping global host reset\n");
+		return 0;
+	}
 
-		/*
-		 * to perform host reset, OS should set HOST_RESET
-		 * and poll until this bit is read to be "0".
-		 * reset must complete within 1 second, or
-		 * the hardware should be considered fried.
-		 */
-		tmp = ata_wait_register(NULL, mmio + HOST_CTL, HOST_RESET,
-					HOST_RESET, 10, 1000);
+	tmp = readl(mmio + HOST_CTL);
+	if (!(tmp & HOST_RESET)) {
+		writel(tmp | HOST_RESET, mmio + HOST_CTL);
+		readl(mmio + HOST_CTL); /* flush */
+	}
 
-		if (tmp & HOST_RESET) {
-			dev_err(host->dev, "controller reset failed (0x%x)\n",
-				tmp);
-			return -EIO;
-		}
+	/*
+	 * To perform host reset, OS should set HOST_RESET and poll until this
+	 * bit is read to be "0". Reset must complete within 1 second, or the
+	 * hardware should be considered fried.
+	 */
+	tmp = ata_wait_register(NULL, mmio + HOST_CTL, HOST_RESET,
+				HOST_RESET, 10, 1000);
+	if (tmp & HOST_RESET) {
+		dev_err(host->dev, "Controller reset failed (0x%x)\n",
+			tmp);
+		return -EIO;
+	}
 
-		/* turn on AHCI mode */
-		ahci_enable_ahci(mmio);
+	/* Turn on AHCI mode */
+	ahci_enable_ahci(mmio);
 
-		/* Some registers might be cleared on reset.  Restore
-		 * initial values.
-		 */
-		if (!(hpriv->flags & AHCI_HFLAG_NO_WRITE_TO_RO))
-			ahci_restore_initial_config(host);
-	} else
-		dev_info(host->dev, "skipping global host reset\n");
+	/* Some registers might be cleared on reset. Restore initial values. */
+	if (!(hpriv->flags & AHCI_HFLAG_NO_WRITE_TO_RO))
+		ahci_restore_initial_config(host);
 
 	return 0;
 }
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index b4f246f0cac7f..0e4c2da508217 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -3802,11 +3802,7 @@ int ata_dev_revalidate(struct ata_device *dev, unsigned int new_class,
 		return -ENODEV;
 
 	/* fail early if !ATA && !ATAPI to avoid issuing [P]IDENTIFY to PMP */
-	if (ata_class_enabled(new_class) &&
-	    new_class != ATA_DEV_ATA &&
-	    new_class != ATA_DEV_ATAPI &&
-	    new_class != ATA_DEV_ZAC &&
-	    new_class != ATA_DEV_SEMB) {
+	if (ata_class_enabled(new_class) && new_class == ATA_DEV_PMP) {
 		ata_dev_info(dev, "class mismatch %u != %u\n",
 			     dev->class, new_class);
 		rc = -ENODEV;
@@ -6142,13 +6138,11 @@ EXPORT_SYMBOL_GPL(ata_pci_device_resume);
  *	LOCKING:
  *	Inherited from platform layer (may sleep).
  */
-int ata_platform_remove_one(struct platform_device *pdev)
+void ata_platform_remove_one(struct platform_device *pdev)
 {
 	struct ata_host *host = platform_get_drvdata(pdev);
 
 	ata_host_detach(host);
-
-	return 0;
 }
 EXPORT_SYMBOL_GPL(ata_platform_remove_one);
 
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 6f8d141915939..b3b526411f363 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1817,9 +1817,7 @@ static unsigned int ata_eh_speed_down(struct ata_device *dev,
 	verdict = ata_eh_speed_down_verdict(dev);
 
 	/* turn off NCQ? */
-	if ((verdict & ATA_EH_SPDN_NCQ_OFF) &&
-	    (dev->flags & (ATA_DFLAG_PIO | ATA_DFLAG_NCQ |
-			   ATA_DFLAG_NCQ_OFF)) == ATA_DFLAG_NCQ) {
+	if ((verdict & ATA_EH_SPDN_NCQ_OFF) && ata_ncq_enabled(dev)) {
 		dev->flags |= ATA_DFLAG_NCQ_OFF;
 		ata_dev_warn(dev, "NCQ disabled due to excessive errors\n");
 		goto done;
@@ -3813,16 +3811,29 @@ void ata_eh_finish(struct ata_port *ap)
 			 * generate sense data in this function,
 			 * considering both err_mask and tf.
 			 */
-			if (qc->flags & ATA_QCFLAG_RETRY)
+			if (qc->flags & ATA_QCFLAG_RETRY) {
+				/*
+				 * Since qc->err_mask is set, ata_eh_qc_retry()
+				 * will not increment scmd->allowed, so upper
+				 * layer will only retry the command if it has
+				 * not already been retried too many times.
+				 */
 				ata_eh_qc_retry(qc);
-			else
+			} else {
 				ata_eh_qc_complete(qc);
+			}
 		} else {
 			if (qc->flags & ATA_QCFLAG_SENSE_VALID) {
 				ata_eh_qc_complete(qc);
 			} else {
 				/* feed zero TF to sense generation */
 				memset(&qc->result_tf, 0, sizeof(qc->result_tf));
+				/*
+				 * Since qc->err_mask is not set,
+				 * ata_eh_qc_retry() will increment
+				 * scmd->allowed, so upper layer is guaranteed
+				 * to retry the command.
+				 */
 				ata_eh_qc_retry(qc);
 			}
 		}
diff --git a/drivers/ata/libata-sata.c b/drivers/ata/libata-sata.c
index f3e7396e31919..6c07025011ed6 100644
--- a/drivers/ata/libata-sata.c
+++ b/drivers/ata/libata-sata.c
@@ -1023,7 +1023,6 @@ EXPORT_SYMBOL_GPL(dev_attr_sw_activity);
 /**
  *	ata_change_queue_depth - Set a device maximum queue depth
  *	@ap: ATA port of the target device
- *	@dev: target ATA device
  *	@sdev: SCSI device to configure queue depth for
  *	@queue_depth: new queue depth
  *
@@ -1031,33 +1030,47 @@ EXPORT_SYMBOL_GPL(dev_attr_sw_activity);
  *	and libata.
  *
  */
-int ata_change_queue_depth(struct ata_port *ap, struct ata_device *dev,
-			   struct scsi_device *sdev, int queue_depth)
+int ata_change_queue_depth(struct ata_port *ap, struct scsi_device *sdev,
+			   int queue_depth)
 {
+	struct ata_device *dev;
 	unsigned long flags;
+	int max_queue_depth;
 
-	if (!dev || !ata_dev_enabled(dev))
-		return sdev->queue_depth;
+	spin_lock_irqsave(ap->lock, flags);
 
-	if (queue_depth < 1 || queue_depth == sdev->queue_depth)
+	dev = ata_scsi_find_dev(ap, sdev);
+	if (!dev || queue_depth < 1 || queue_depth == sdev->queue_depth) {
+		spin_unlock_irqrestore(ap->lock, flags);
 		return sdev->queue_depth;
+	}
 
-	/* NCQ enabled? */
-	spin_lock_irqsave(ap->lock, flags);
-	dev->flags &= ~ATA_DFLAG_NCQ_OFF;
-	if (queue_depth == 1 || !ata_ncq_enabled(dev)) {
+	/*
+	 * Make sure that the queue depth requested does not exceed the device
+	 * capabilities.
+	 */
+	max_queue_depth = min(ATA_MAX_QUEUE, sdev->host->can_queue);
+	max_queue_depth = min(max_queue_depth, ata_id_queue_depth(dev->id));
+	if (queue_depth > max_queue_depth) {
+		spin_unlock_irqrestore(ap->lock, flags);
+		return -EINVAL;
+	}
+
+	/*
+	 * If NCQ is not supported by the device or if the target queue depth
+	 * is 1 (to disable drive side command queueing), turn off NCQ.
+	 */
+	if (queue_depth == 1 || !ata_ncq_supported(dev)) {
 		dev->flags |= ATA_DFLAG_NCQ_OFF;
 		queue_depth = 1;
+	} else {
+		dev->flags &= ~ATA_DFLAG_NCQ_OFF;
 	}
-	spin_unlock_irqrestore(ap->lock, flags);
 
-	/* limit and apply queue depth */
-	queue_depth = min(queue_depth, sdev->host->can_queue);
-	queue_depth = min(queue_depth, ata_id_queue_depth(dev->id));
-	queue_depth = min(queue_depth, ATA_MAX_QUEUE);
+	spin_unlock_irqrestore(ap->lock, flags);
 
-	if (sdev->queue_depth == queue_depth)
-		return -EINVAL;
+	if (queue_depth == sdev->queue_depth)
+		return sdev->queue_depth;
 
 	return scsi_change_queue_depth(sdev, queue_depth);
 }
@@ -1082,8 +1095,7 @@ int ata_scsi_change_queue_depth(struct scsi_device *sdev, int queue_depth)
 {
 	struct ata_port *ap = ata_shost_to_port(sdev->host);
 
-	return ata_change_queue_depth(ap, ata_scsi_find_dev(ap, sdev),
-				      sdev, queue_depth);
+	return ata_change_queue_depth(ap, sdev, queue_depth);
 }
 EXPORT_SYMBOL_GPL(ata_scsi_change_queue_depth);
 
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 551077cea4e4e..4a5555cd8b6b9 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -1122,7 +1122,7 @@ int ata_scsi_dev_config(struct scsi_device *sdev, struct ata_device *dev)
 	if (dev->flags & ATA_DFLAG_AN)
 		set_bit(SDEV_EVT_MEDIA_CHANGE, sdev->supported_events);
 
-	if (dev->flags & ATA_DFLAG_NCQ)
+	if (ata_ncq_supported(dev))
 		depth = min(sdev->host->can_queue, ata_id_queue_depth(dev->id));
 	depth = min(ATA_MAX_QUEUE, depth);
 	scsi_change_queue_depth(sdev, depth);
diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c
index 99a2ce7234953..b1daa4d3fcd97 100644
--- a/drivers/ata/pata_ixp4xx_cf.c
+++ b/drivers/ata/pata_ixp4xx_cf.c
@@ -303,7 +303,7 @@ static struct platform_driver ixp4xx_pata_platform_driver = {
 		.of_match_table = ixp4xx_pata_of_match,
 	},
 	.probe		= ixp4xx_pata_probe,
-	.remove		= ata_platform_remove_one,
+	.remove_new	= ata_platform_remove_one,
 };
 
 module_platform_driver(ixp4xx_pata_platform_driver);
diff --git a/drivers/ata/pata_octeon_cf.c b/drivers/ata/pata_octeon_cf.c
index b1ce9f1761af5..ff538b8589287 100644
--- a/drivers/ata/pata_octeon_cf.c
+++ b/drivers/ata/pata_octeon_cf.c
@@ -16,6 +16,7 @@
 #include <linux/slab.h>
 #include <linux/irq.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
 #include <scsi/scsi_host.h>
@@ -804,9 +805,7 @@ static int octeon_cf_probe(struct platform_device *pdev)
 	struct resource *res_cs0, *res_cs1;
 
 	bool is_16bit;
-	const __be32 *cs_num;
-	struct property *reg_prop;
-	int n_addr, n_size, reg_len;
+	u64 reg;
 	struct device_node *node;
 	void __iomem *cs0;
 	void __iomem *cs1 = NULL;
@@ -834,15 +833,10 @@ static int octeon_cf_probe(struct platform_device *pdev)
 	else
 		is_16bit = false;
 
-	n_addr = of_n_addr_cells(node);
-	n_size = of_n_size_cells(node);
-
-	reg_prop = of_find_property(node, "reg", &reg_len);
-	if (!reg_prop || reg_len < sizeof(__be32))
-		return -EINVAL;
-
-	cs_num = reg_prop->value;
-	cf_port->cs0 = be32_to_cpup(cs_num);
+	rv = of_property_read_reg(node, 0, &reg, NULL);
+	if (rv < 0)
+		return rv;
+	cf_port->cs0 = upper_32_bits(reg);
 
 	if (cf_port->is_true_ide) {
 		struct device_node *dma_node;
@@ -884,13 +878,12 @@ static int octeon_cf_probe(struct platform_device *pdev)
 		cs1 = devm_ioremap(&pdev->dev, res_cs1->start,
 					   resource_size(res_cs1));
 		if (!cs1)
-			return rv;
-
-		if (reg_len < (n_addr + n_size + 1) * sizeof(__be32))
 			return -EINVAL;
 
-		cs_num += n_addr + n_size;
-		cf_port->cs1 = be32_to_cpup(cs_num);
+		rv = of_property_read_reg(node, 1, &reg, NULL);
+		if (rv < 0)
+			return rv;
+		cf_port->cs1 = upper_32_bits(reg);
 	}
 
 	res_cs0 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
diff --git a/drivers/ata/pata_of_platform.c b/drivers/ata/pata_of_platform.c
index 178b28eff170a..4956f0f5b93fa 100644
--- a/drivers/ata/pata_of_platform.c
+++ b/drivers/ata/pata_of_platform.c
@@ -89,7 +89,7 @@ static struct platform_driver pata_of_platform_driver = {
 		.of_match_table = pata_of_platform_match,
 	},
 	.probe		= pata_of_platform_probe,
-	.remove		= ata_platform_remove_one,
+	.remove_new	= ata_platform_remove_one,
 };
 
 module_platform_driver(pata_of_platform_driver);
diff --git a/drivers/ata/pata_parport/aten.c b/drivers/ata/pata_parport/aten.c
index 1bd248c42f8b7..8328a49a95efc 100644
--- a/drivers/ata/pata_parport/aten.c
+++ b/drivers/ata/pata_parport/aten.c
@@ -1,13 +1,12 @@
-/* 
-        aten.c  (c) 1997-8  Grant R. Guenther <grant@torque.net>
-                            Under the terms of the GNU General Public License.
-
-	aten.c is a low-level protocol driver for the ATEN EH-100
-	parallel port adapter.  The EH-100 supports 4-bit and 8-bit
-        modes only.  There is also an EH-132 which supports EPP mode
-        transfers.  The EH-132 is not yet supported.
-
-*/
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * (c) 1997-8  Grant R. Guenther <grant@torque.net>
+ *
+ * aten.c is a low-level protocol driver for the ATEN EH-100
+ * parallel port adapter.  The EH-100 supports 4-bit and 8-bit
+ * modes only.  There is also an EH-132 which supports EPP mode
+ * transfers.  The EH-132 is not yet supported.
+ */
 
 #include <linux/module.h>
 #include <linux/init.h>
@@ -20,36 +19,36 @@
 
 #define j44(a,b)                ((((a>>4)&0x0f)|(b&0xf0))^0x88)
 
-/* cont = 0 - access the IDE register file 
-   cont = 1 - access the IDE command set 
-*/
-
+/*
+ * cont = 0 - access the IDE register file
+ * cont = 1 - access the IDE command set
+ */
 static int  cont_map[2] = { 0x08, 0x20 };
 
 static void aten_write_regr(struct pi_adapter *pi, int cont, int regr, int val)
-
-{	int r;
-
-	r = regr + cont_map[cont] + 0x80;
+{
+	int r = regr + cont_map[cont] + 0x80;
 
 	w0(r); w2(0xe); w2(6); w0(val); w2(7); w2(6); w2(0xc);
 }
 
 static int aten_read_regr(struct pi_adapter *pi, int cont, int regr)
+{
+	int  a, b, r;
 
-{	int  a, b, r;
-
-        r = regr + cont_map[cont] + 0x40;
+	r = regr + cont_map[cont] + 0x40;
 
 	switch (pi->mode) {
 
-        case 0: w0(r); w2(0xe); w2(6); 
+	case 0:
+		w0(r); w2(0xe); w2(6);
 		w2(7); w2(6); w2(0);
 		a = r1(); w0(0x10); b = r1(); w2(0xc);
 		return j44(a,b);
 
-        case 1: r |= 0x10;
-		w0(r); w2(0xe); w2(6); w0(0xff); 
+	case 1:
+		r |= 0x10;
+		w0(r); w2(0xe); w2(6); w0(0xff);
 		w2(0x27); w2(0x26); w2(0x20);
 		a = r0();
 		w2(0x26); w2(0xc);
@@ -59,27 +58,30 @@ static int aten_read_regr(struct pi_adapter *pi, int cont, int regr)
 }
 
 static void aten_read_block(struct pi_adapter *pi, char *buf, int count)
-
-{	int  k, a, b, c, d;
+{
+	int  k, a, b, c, d;
 
 	switch (pi->mode) {
 
-	case 0:	w0(0x48); w2(0xe); w2(6);
-		for (k=0;k<count/2;k++) {
+	case 0:
+		w0(0x48); w2(0xe); w2(6);
+		for (k = 0; k < count / 2; k++) {
 			w2(7); w2(6); w2(2);
 			a = r1(); w0(0x58); b = r1();
 			w2(0); d = r1(); w0(0x48); c = r1();
-			buf[2*k] = j44(c,d);
-			buf[2*k+1] = j44(a,b);
+			buf[2 * k] = j44(c, d);
+			buf[2 * k + 1] = j44(a, b);
 		}
 		w2(0xc);
 		break;
 
-	case 1: w0(0x58); w2(0xe); w2(6);
-		for (k=0;k<count/2;k++) {
+	case 1:
+		w0(0x58); w2(0xe); w2(6);
+		for (k = 0; k < count / 2; k++) {
 			w2(0x27); w2(0x26); w2(0x22);
 			a = r0(); w2(0x20); b = r0();
-			buf[2*k] = b; buf[2*k+1] = a;
+			buf[2 * k] = b;
+			buf[2 * k + 1] = a;
 		}
 		w2(0x26); w2(0xc);
 		break;
@@ -87,36 +89,37 @@ static void aten_read_block(struct pi_adapter *pi, char *buf, int count)
 }
 
 static void aten_write_block(struct pi_adapter *pi, char *buf, int count)
-
-{	int k;
+{
+	int k;
 
 	w0(0x88); w2(0xe); w2(6);
-	for (k=0;k<count/2;k++) {
-		w0(buf[2*k+1]); w2(0xe); w2(6);
-		w0(buf[2*k]); w2(7); w2(6);
+	for (k = 0; k < count / 2; k++) {
+		w0(buf[2 * k + 1]); w2(0xe); w2(6);
+		w0(buf[2 * k]); w2(7); w2(6);
 	}
 	w2(0xc);
 }
 
 static void aten_connect(struct pi_adapter *pi)
-
-{       pi->saved_r0 = r0();
-        pi->saved_r2 = r2();
-	w2(0xc);	
+{
+	pi->saved_r0 = r0();
+	pi->saved_r2 = r2();
+	w2(0xc);
 }
 
 static void aten_disconnect(struct pi_adapter *pi)
-
-{       w0(pi->saved_r0);
-        w2(pi->saved_r2);
-} 
+{
+	w0(pi->saved_r0);
+	w2(pi->saved_r2);
+}
 
 static void aten_log_adapter(struct pi_adapter *pi)
+{
+	char *mode_string[2] = { "4-bit", "8-bit" };
 
-{       char    *mode_string[2] = {"4-bit","8-bit"};
-
-	dev_info(&pi->dev, "ATEN EH-100 at 0x%x, mode %d (%s), delay %d\n",
-		pi->port, pi->mode, mode_string[pi->mode], pi->delay);
+	dev_info(&pi->dev,
+		 "ATEN EH-100 at 0x%x, mode %d (%s), delay %d\n",
+		 pi->port, pi->mode, mode_string[pi->mode], pi->delay);
 }
 
 static struct pi_protocol aten = {
diff --git a/drivers/ata/pata_parport/bpck.c b/drivers/ata/pata_parport/bpck.c
index 1c5035a09554a..9f4309f9b57f6 100644
--- a/drivers/ata/pata_parport/bpck.c
+++ b/drivers/ata/pata_parport/bpck.c
@@ -1,11 +1,10 @@
-/* 
-	bpck.c	(c) 1996-8  Grant R. Guenther <grant@torque.net>
-		            Under the terms of the GNU General Public License.
-
-	bpck.c is a low-level protocol driver for the MicroSolutions 
-	"backpack" parallel port IDE adapter.  
-
-*/
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * (c) 1996-1998  Grant R. Guenther <grant@torque.net>
+ *
+ * bpck.c is a low-level protocol driver for the MicroSolutions
+ * "backpack" parallel port IDE adapter.
+ */
 
 #include <linux/module.h>
 #include <linux/init.h>
@@ -29,59 +28,57 @@
 
 #define j44(l,h)     (((l>>3)&0x7)|((l>>4)&0x8)|((h<<1)&0x70)|(h&0x80))
 
-/* cont = 0 - access the IDE register file 
-   cont = 1 - access the IDE command set 
-   cont = 2 - use internal bpck register addressing
-*/
-
+/*
+ * cont = 0 - access the IDE register file
+ * cont = 1 - access the IDE command set
+ * cont = 2 - use internal bpck register addressing
+ */
 static int  cont_map[3] = { 0x40, 0x48, 0 };
 
 static int bpck_read_regr(struct pi_adapter *pi, int cont, int regr)
-
-{       int r, l, h;
+{
+	int r, l, h;
 
 	r = regr + cont_map[cont];
 
 	switch (pi->mode) {
-
-	case 0: w0(r & 0xf); w0(r); t2(2); t2(4);
+	case 0:
+		w0(r & 0xf); w0(r); t2(2); t2(4);
 	        l = r1();
-        	t2(4);
-        	h = r1();
-        	return j44(l,h);
-
-	case 1: w0(r & 0xf); w0(r); t2(2);
-	        e2(); t2(0x20);
+		t2(4);
+		h = r1();
+		return j44(l, h);
+	case 1:
+		w0(r & 0xf); w0(r); t2(2);
+		e2(); t2(0x20);
 		t2(4); h = r0();
-	        t2(1); t2(0x20);
-	        return h;
-
+		t2(1); t2(0x20);
+		return h;
 	case 2:
 	case 3:
-	case 4: w0(r); w2(9); w2(0); w2(0x20);
+	case 4:
+		w0(r); w2(9); w2(0); w2(0x20);
 		h = r4();
 		w2(0);
 		return h;
 
 	}
 	return -1;
-}	
+}
 
 static void bpck_write_regr(struct pi_adapter *pi, int cont, int regr, int val)
-
-{	int	r;
+{
+	int r;
 
         r = regr + cont_map[cont];
 
 	switch (pi->mode) {
-
 	case 0:
 	case 1: w0(r);
 		t2(2);
 		w0(val);
 		o2(); t2(4); t2(1);
 		break;
-
 	case 2:
 	case 3:
 	case 4: w0(r); w2(9); w2(0);
@@ -97,210 +94,249 @@ static void bpck_write_regr(struct pi_adapter *pi, int cont, int regr, int val)
 #define RR(r)		(bpck_read_regr(pi,2,r))
 
 static void bpck_write_block(struct pi_adapter *pi, char *buf, int count)
-
-{	int i;
+{
+	int i;
 
 	switch (pi->mode) {
 
-	case 0: WR(4,0x40);
+	case 0:
+		WR(4, 0x40);
+		w0(0x40); t2(2); t2(1);
+		for (i = 0; i < count; i++) {
+			w0(buf[i]);
+			t2(4);
+		}
+		WR(4, 0);
+		break;
+
+	case 1:
+		WR(4, 0x50);
 		w0(0x40); t2(2); t2(1);
-		for (i=0;i<count;i++) { w0(buf[i]); t2(4); }
-		WR(4,0);
+		for (i = 0; i < count; i++) {
+			w0(buf[i]);
+			t2(4);
+		}
+		WR(4, 0x10);
 		break;
 
-	case 1: WR(4,0x50);
-                w0(0x40); t2(2); t2(1);
-                for (i=0;i<count;i++) { w0(buf[i]); t2(4); }
-                WR(4,0x10);
+	case 2:
+		WR(4, 0x48);
+		w0(0x40); w2(9); w2(0); w2(1);
+		for (i = 0; i < count; i++)
+			w4(buf[i]);
+		w2(0);
+		WR(4, 8);
 		break;
 
-	case 2: WR(4,0x48);
+	case 3:
+		WR(4, 0x48);
 		w0(0x40); w2(9); w2(0); w2(1);
-		for (i=0;i<count;i++) w4(buf[i]);
+		for (i = 0; i < count / 2; i++)
+			w4w(((u16 *)buf)[i]);
 		w2(0);
-		WR(4,8);
+		WR(4, 8);
 		break;
 
-        case 3: WR(4,0x48);
-                w0(0x40); w2(9); w2(0); w2(1);
-                for (i=0;i<count/2;i++) w4w(((u16 *)buf)[i]);
-                w2(0);
-                WR(4,8);
-                break;
- 
-        case 4: WR(4,0x48);
-                w0(0x40); w2(9); w2(0); w2(1);
-                for (i=0;i<count/4;i++) w4l(((u32 *)buf)[i]);
-                w2(0);
-                WR(4,8);
-                break;
+	case 4:
+		WR(4, 0x48);
+		w0(0x40); w2(9); w2(0); w2(1);
+		for (i = 0; i < count / 4; i++)
+			w4l(((u32 *)buf)[i]);
+		w2(0);
+		WR(4, 8);
+		break;
  	}
 }
 
 static void bpck_read_block(struct pi_adapter *pi, char *buf, int count)
-
-{	int i, l, h;
+{
+	int i, l, h;
 
 	switch (pi->mode) {
 
-      	case 0: WR(4,0x40);
+	case 0:
+		WR(4, 0x40);
 		w0(0x40); t2(2);
-		for (i=0;i<count;i++) {
-		    t2(4); l = r1();
-		    t2(4); h = r1();
-		    buf[i] = j44(l,h);
+		for (i = 0; i < count; i++) {
+			t2(4); l = r1();
+			t2(4); h = r1();
+			buf[i] = j44(l, h);
 		}
-		WR(4,0);
+		WR(4, 0);
 		break;
 
-	case 1: WR(4,0x50);
+	case 1:
+		WR(4, 0x50);
 		w0(0x40); t2(2); t2(0x20);
-      	        for(i=0;i<count;i++) { t2(4); buf[i] = r0(); }
-	        t2(1); t2(0x20);
-	        WR(4,0x10);
+		for (i = 0; i < count; i++) {
+			t2(4);
+			buf[i] = r0();
+		}
+		t2(1); t2(0x20);
+		WR(4, 0x10);
 		break;
 
-	case 2: WR(4,0x48);
+	case 2:
+		WR(4, 0x48);
 		w0(0x40); w2(9); w2(0); w2(0x20);
-		for (i=0;i<count;i++) buf[i] = r4();
+		for (i = 0; i < count; i++)
+			buf[i] = r4();
 		w2(0);
-		WR(4,8);
+		WR(4, 8);
 		break;
 
-        case 3: WR(4,0x48);
-                w0(0x40); w2(9); w2(0); w2(0x20);
-                for (i=0;i<count/2;i++) ((u16 *)buf)[i] = r4w();
-                w2(0);
-                WR(4,8);
-                break;
+	case 3:
+		WR(4, 0x48);
+		w0(0x40); w2(9); w2(0); w2(0x20);
+		for (i = 0; i < count / 2; i++)
+			((u16 *)buf)[i] = r4w();
+		w2(0);
+		WR(4, 8);
+		break;
 
-        case 4: WR(4,0x48);
-                w0(0x40); w2(9); w2(0); w2(0x20);
-                for (i=0;i<count/4;i++) ((u32 *)buf)[i] = r4l();
-                w2(0);
-                WR(4,8);
-                break;
+	case 4:
+		WR(4, 0x48);
+		w0(0x40); w2(9); w2(0); w2(0x20);
+		for (i = 0; i < count / 4; i++)
+			((u32 *)buf)[i] = r4l();
+		w2(0);
+		WR(4, 8);
+		break;
 
 	}
 }
 
 static int bpck_probe_unit(struct pi_adapter *pi)
-
-{	int o1, o0, f7, id;
+{
+	int o1, o0, f7, id;
 	int t, s;
 
 	id = pi->unit;
 	s = 0;
-	w2(4); w2(0xe); r2(); t2(2); 
+	w2(4); w2(0xe); r2(); t2(2);
 	o1 = r1()&0xf8;
 	o0 = r0();
 	w0(255-id); w2(4); w0(id);
 	t2(8); t2(8); t2(8);
 	t2(2); t = r1()&0xf8;
 	f7 = ((id % 8) == 7);
-	if ((f7) || (t != o1)) { t2(2); s = r1()&0xf8; }
+	if ((f7) || (t != o1)) {
+		t2(2);
+		s = r1() & 0xf8;
+	}
 	if ((t == o1) && ((!f7) || (s == o1)))  {
 		w2(0x4c); w0(o0);
-		return 0;	
+		return 0;
 	}
 	t2(8); w0(0); t2(2); w2(0x4c); w0(o0);
 	return 1;
 }
-	
-static void bpck_connect(struct pi_adapter *pi)
 
-{       pi->saved_r0 = r0();
+static void bpck_connect(struct pi_adapter *pi)
+{
+	pi->saved_r0 = r0();
 	w0(0xff-pi->unit); w2(4); w0(pi->unit);
-	t2(8); t2(8); t2(8); 
+	t2(8); t2(8); t2(8);
 	t2(2); t2(2);
-	
-	switch (pi->mode) {
 
-	case 0: t2(8); WR(4,0);
+	switch (pi->mode) {
+	case 0:
+		t2(8); WR(4, 0);
 		break;
-
-	case 1: t2(8); WR(4,0x10);
+	case 1:
+		t2(8); WR(4, 0x10);
 		break;
-
 	case 2:
-        case 3:
-	case 4: w2(0); WR(4,8);
+	case 3:
+	case 4:
+		w2(0); WR(4, 8);
 		break;
-
 	}
 
 	WR(5,8);
 
-/*	if (pi->devtype == PI_PCD) {	possibly wrong, purpose unknown */
-		WR(0x46,0x10);		/* fiddle with ESS logic ??? */
-		WR(0x4c,0x38);
-		WR(0x4d,0x88);
-		WR(0x46,0xa0);
-		WR(0x41,0);
-		WR(0x4e,8);
-/*	}*/
+	/*
+	 * Possibly wrong, purpose unknown (fiddle with ESS logic ???)
+	 * if (pi->devtype == PI_PCD) {
+	 */
+	WR(0x46, 0x10);
+	WR(0x4c, 0x38);
+	WR(0x4d, 0x88);
+	WR(0x46, 0xa0);
+	WR(0x41, 0);
+	WR(0x4e, 8);
+	/* } */
 }
 
 static void bpck_disconnect(struct pi_adapter *pi)
-
-{	w0(0); 
-	if (pi->mode >= 2) { w2(9); w2(0); } else t2(2);
+{
+	w0(0);
+	if (pi->mode >= 2) {
+		w2(9); w2(0);
+	} else {
+		t2(2);
+	}
 	w2(0x4c); w0(pi->saved_r0);
-} 
+}
 
 static void bpck_force_spp(struct pi_adapter *pi)
+{
+	/* This fakes the EPP protocol to turn off EPP ... */
+	pi->saved_r0 = r0();
+	w0(0xff-pi->unit); w2(4); w0(pi->unit);
+	t2(8); t2(8); t2(8);
+	t2(2); t2(2);
 
-/* This fakes the EPP protocol to turn off EPP ... */
-
-{       pi->saved_r0 = r0();
-        w0(0xff-pi->unit); w2(4); w0(pi->unit);
-        t2(8); t2(8); t2(8); 
-        t2(2); t2(2);
-
-        w2(0); 
-        w0(4); w2(9); w2(0); 
-        w0(0); w2(1); w2(3); w2(0);     
-        w0(0); w2(9); w2(0);
-        w2(0x4c); w0(pi->saved_r0);
+	w2(0);
+	w0(4); w2(9); w2(0);
+	w0(0); w2(1); w2(3); w2(0);
+	w0(0); w2(9); w2(0);
+	w2(0x4c); w0(pi->saved_r0);
 }
 
 #define TEST_LEN  16
 
 static int bpck_test_proto(struct pi_adapter *pi)
-
-{	int i, e, l, h, om;
+{
+	int i, e, l, h, om;
 	char buf[TEST_LEN];
 
 	bpck_force_spp(pi);
 
 	switch (pi->mode) {
 
-	case 0: bpck_connect(pi);
-		WR(0x13,0x7f);
+	case 0:
+		bpck_connect(pi);
+		WR(0x13, 0x7f);
 		w0(0x13); t2(2);
-		for(i=0;i<TEST_LEN;i++) {
-                    t2(4); l = r1();
-                    t2(4); h = r1();
-                    buf[i] = j44(l,h);
+		for (i = 0; i < TEST_LEN; i++) {
+			t2(4); l = r1();
+			t2(4); h = r1();
+			buf[i] = j44(l, h);
 		}
 		bpck_disconnect(pi);
 		break;
 
-        case 1: bpck_connect(pi);
-		WR(0x13,0x7f);
-                w0(0x13); t2(2); t2(0x20);
-                for(i=0;i<TEST_LEN;i++) { t2(4); buf[i] = r0(); }
-                t2(1); t2(0x20);
+	case 1:
+		bpck_connect(pi);
+		WR(0x13, 0x7f);
+		w0(0x13); t2(2); t2(0x20);
+		for (i = 0; i < TEST_LEN; i++) {
+			t2(4);
+			buf[i] = r0();
+		}
+		t2(1); t2(0x20);
 		bpck_disconnect(pi);
 		break;
 
 	case 2:
 	case 3:
-	case 4: om = pi->mode;
+	case 4:
+		om = pi->mode;
 		pi->mode = 0;
 		bpck_connect(pi);
-		WR(7,3);
-		WR(4,8);
+		WR(7, 3);
+		WR(4, 8);
 		bpck_disconnect(pi);
 
 		pi->mode = om;
@@ -308,34 +344,44 @@ static int bpck_test_proto(struct pi_adapter *pi)
 		w0(0x13); w2(9); w2(1); w0(0); w2(3); w2(0); w2(0xe0);
 
 		switch (pi->mode) {
-		  case 2: for (i=0;i<TEST_LEN;i++) buf[i] = r4();
-			  break;
-		  case 3: for (i=0;i<TEST_LEN/2;i++) ((u16 *)buf)[i] = r4w();
-                          break;
-		  case 4: for (i=0;i<TEST_LEN/4;i++) ((u32 *)buf)[i] = r4l();
-                          break;
+		case 2:
+			for (i = 0; i < TEST_LEN; i++)
+				buf[i] = r4();
+			break;
+		case 3:
+			for (i = 0; i < TEST_LEN / 2; i++)
+				((u16 *)buf)[i] = r4w();
+			break;
+		case 4:
+			for (i = 0; i < TEST_LEN / 4; i++)
+				((u32 *)buf)[i] = r4l();
+			break;
 		}
 
 		w2(0);
-		WR(7,0);
+		WR(7, 0);
 		bpck_disconnect(pi);
-
 		break;
 
 	}
 
 	dev_dbg(&pi->dev, "bpck: 0x%x unit %d mode %d: ",
 		pi->port, pi->unit, pi->mode);
-	print_hex_dump_debug("bpck: ", DUMP_PREFIX_NONE, TEST_LEN, 1, buf, TEST_LEN, false);
+	print_hex_dump_debug("bpck: ", DUMP_PREFIX_NONE, TEST_LEN, 1, buf,
+			     TEST_LEN, false);
 
 	e = 0;
-	for (i=0;i<TEST_LEN;i++) if (buf[i] != (i+1)) e++;
+	for (i = 0; i < TEST_LEN; i++) {
+		if (buf[i] != i + 1)
+			e++;
+	}
+
 	return e;
 }
 
 static void bpck_read_eeprom(struct pi_adapter *pi, char *buf)
-
-{       int i, j, k, p, v, f, om, od;
+{
+	int i, j, k, p, v, f, om, od;
 
 	bpck_force_spp(pi);
 
@@ -343,77 +389,97 @@ static void bpck_read_eeprom(struct pi_adapter *pi, char *buf)
 	pi->mode = 0; pi->delay = 6;
 
 	bpck_connect(pi);
-	
-	WR(4,0);
-	for (i=0;i<64;i++) {
-	    WR(6,8);  
-	    WR(6,0xc);
-	    p = 0x100;
-	    for (k=0;k<9;k++) {
-		f = (((i + 0x180) & p) != 0) * 2;
-		WR(6,f+0xc); 
-		WR(6,f+0xd); 
-		WR(6,f+0xc);
-		p = (p >> 1);
-	    }
-	    for (j=0;j<2;j++) {
-		v = 0;
-		for (k=0;k<8;k++) {
-		    WR(6,0xc); 
-		    WR(6,0xd); 
-		    WR(6,0xc); 
-		    f = RR(0);
-		    v = 2*v + (f == 0x84);
+
+	WR(4, 0);
+	for (i = 0; i < 64; i++) {
+		WR(6, 8);
+		WR(6, 0xc);
+		p = 0x100;
+		for (k = 0; k < 9; k++) {
+			f = (((i + 0x180) & p) != 0) * 2;
+			WR(6, f + 0xc);
+			WR(6, f + 0xd);
+			WR(6, f + 0xc);
+			p = (p >> 1);
+		}
+		for (j = 0; j < 2; j++) {
+			v = 0;
+			for (k = 0; k < 8; k++) {
+				WR(6, 0xc);
+				WR(6, 0xd);
+				WR(6, 0xc);
+				f = RR(0);
+				v = 2 * v + (f == 0x84);
+			}
+			buf[2 * i + 1 - j] = v;
 		}
-		buf[2*i+1-j] = v;
-	    }
 	}
-	WR(6,8);
-	WR(6,0);
-	WR(5,8);
+	WR(6, 8);
+	WR(6, 0);
+	WR(5, 8);
 
 	bpck_disconnect(pi);
 
         if (om >= 2) {
-                bpck_connect(pi);
-                WR(7,3);
-                WR(4,8);
-                bpck_disconnect(pi);
+		bpck_connect(pi);
+		WR(7, 3);
+		WR(4, 8);
+		bpck_disconnect(pi);
         }
 
 	pi->mode = om; pi->delay = od;
 }
 
-static int bpck_test_port(struct pi_adapter *pi)	/* check for 8-bit port */
-
-{	int	i, r, m;
+static int bpck_test_port(struct pi_adapter *pi)
+{
+	int i, r, m;
 
+	/* Check for 8-bit port */
 	w2(0x2c); i = r0(); w0(255-i); r = r0(); w0(i);
 	m = -1;
-	if (r == i) m = 2;
-	if (r == (255-i)) m = 0;
+	if (r == i)
+		m = 2;
+	if (r == (255-i))
+		m = 0;
+
+	w2(0xc);
+	i = r0();
+	w0(255-i);
+	r = r0();
+	w0(i);
+	if (r != (255-i))
+		m = -1;
+
+	if (m == 0) {
+		w2(6);
+		w2(0xc);
+		r = r0();
+		w0(0xaa);
+		w0(r);
+		w0(0xaa);
+	}
+	if (m == 2) {
+		w2(0x26);
+		w2(0xc);
+	}
 
-	w2(0xc); i = r0(); w0(255-i); r = r0(); w0(i);
-	if (r != (255-i)) m = -1;
-	
-	if (m == 0) { w2(6); w2(0xc); r = r0(); w0(0xaa); w0(r); w0(0xaa); }
-	if (m == 2) { w2(0x26); w2(0xc); }
+	if (m == -1)
+		return 0;
 
-	if (m == -1) return 0;
 	return 5;
 }
 
 static void bpck_log_adapter(struct pi_adapter *pi)
-
-{	char	*mode_string[5] = { "4-bit","8-bit","EPP-8",
-				    "EPP-16","EPP-32" };
+{
+	char *mode_str[5] = { "4-bit", "8-bit", "EPP-8", "EPP-16", "EPP-32" };
 	char scratch[128];
 
 	bpck_read_eeprom(pi,scratch);
 	print_hex_dump_bytes("bpck EEPROM: ", DUMP_PREFIX_NONE, scratch, 128);
-	dev_info(&pi->dev, "backpack %8.8s unit %d at 0x%x, mode %d (%s), delay %d\n",
+	dev_info(&pi->dev,
+		 "backpack %8.8s unit %d at 0x%x, mode %d (%s), delay %d\n",
 		 &scratch[110], pi->unit, pi->port, pi->mode,
-		 mode_string[pi->mode], pi->delay);
+		 mode_str[pi->mode], pi->delay);
 }
 
 static struct pi_protocol bpck = {
diff --git a/drivers/ata/pata_parport/bpck6.c b/drivers/ata/pata_parport/bpck6.c
index 76febd07a9bb4..c6dbd14120d12 100644
--- a/drivers/ata/pata_parport/bpck6.c
+++ b/drivers/ata/pata_parport/bpck6.c
@@ -1,15 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
-	backpack.c (c) 2001 Micro Solutions Inc.
-		Released under the terms of the GNU General Public license
-
-	backpack.c is a low-level protocol driver for the Micro Solutions
-		"BACKPACK" parallel port IDE adapter
-		(Works on Series 6 drives)
-
-	Written by: Ken Hahn     (linux-dev@micro-solutions.com)
-	            Clive Turvey (linux-dev@micro-solutions.com)
-
-*/
+ * (c) 2001 Micro Solutions Inc.
+ *
+ * backpack.c is a low-level protocol driver for the Micro Solutions
+ * "BACKPACK" parallel port IDE adapter (works on Series 6 drives).
+ *
+ * Written by: Ken Hahn (linux-dev@micro-solutions.com)
+ *             Clive Turvey (linux-dev@micro-solutions.com)
+ */
 
 #include <linux/module.h>
 #include <linux/init.h>
@@ -326,11 +324,14 @@ static int bpck6_open(struct pi_adapter *pi)
 	if (j != k)
 		goto fail;
 
-	if (i & 4)	// EPP
+	if (i & 4) {
+		/* EPP */
 		parport_frob_control(pi->pardev->port,
 			PARPORT_CONTROL_SELECT | PARPORT_CONTROL_INIT, 0);
-	else				// PPC/ECP
+	} else {
+		/* PPC/ECP */
 		parport_frob_control(pi->pardev->port, PARPORT_CONTROL_SELECT, 0);
+	}
 
 	pi->private = 0;
 
@@ -347,17 +348,20 @@ fail:
 	parport_write_control(pi->pardev->port, pi->saved_r2);
 	parport_write_data(pi->pardev->port, pi->saved_r0);
 
-	return 0; // FAIL
+	return 0;
 }
 
 static void bpck6_deselect(struct pi_adapter *pi)
 {
-	if (mode_map[pi->mode] & 4)	// EPP
+	if (mode_map[pi->mode] & 4) {
+		/* EPP */
 		parport_frob_control(pi->pardev->port, PARPORT_CONTROL_INIT,
-							PARPORT_CONTROL_INIT);
-	else								// PPC/ECP
+				     PARPORT_CONTROL_INIT);
+	} else {
+		/* PPC/ECP */
 		parport_frob_control(pi->pardev->port, PARPORT_CONTROL_SELECT,
-							PARPORT_CONTROL_SELECT);
+				     PARPORT_CONTROL_SELECT);
+	}
 
 	parport_write_data(pi->pardev->port, pi->saved_r0);
 	parport_write_control(pi->pardev->port,
@@ -386,7 +390,8 @@ static void bpck6_disconnect(struct pi_adapter *pi)
 	bpck6_deselect(pi);
 }
 
-static int bpck6_test_port(struct pi_adapter *pi)   /* check for 8-bit port */
+/* check for 8-bit port */
+static int bpck6_test_port(struct pi_adapter *pi)
 {
 	dev_dbg(&pi->dev, "PARPORT indicates modes=%x for lp=0x%lx\n",
 		pi->pardev->port->modes, pi->pardev->port->base);
@@ -413,28 +418,26 @@ static int bpck6_probe_unit(struct pi_adapter *pi)
 
 	dev_dbg(&pi->dev, "ppc_open returned %2x\n", out);
 
-  	if(out)
- 	{
+	if (out) {
 		bpck6_deselect(pi);
 		dev_dbg(&pi->dev, "leaving probe\n");
 		pi->mode = saved_mode;
-               return(1);
+		return 1;
 	}
-  	else
-  	{
-		dev_dbg(&pi->dev, "Failed open\n");
-		pi->mode = saved_mode;
-    		return(0);
-  	}
+
+	dev_dbg(&pi->dev, "Failed open\n");
+	pi->mode = saved_mode;
+
+	return 0;
 }
 
 static void bpck6_log_adapter(struct pi_adapter *pi)
 {
-	char *mode_string[5]=
-		{"4-bit","8-bit","EPP-8","EPP-16","EPP-32"};
+	char *mode_string[5] = { "4-bit", "8-bit", "EPP-8", "EPP-16", "EPP-32" };
 
-	dev_info(&pi->dev, "Micro Solutions BACKPACK Drive unit %d at 0x%x, mode:%d (%s), delay %d\n",
-		pi->unit, pi->port, pi->mode, mode_string[pi->mode], pi->delay);
+	dev_info(&pi->dev,
+		 "Micro Solutions BACKPACK Drive unit %d at 0x%x, mode:%d (%s), delay %d\n",
+		 pi->unit, pi->port, pi->mode, mode_string[pi->mode], pi->delay);
 }
 
 static struct pi_protocol bpck6 = {
diff --git a/drivers/ata/pata_parport/comm.c b/drivers/ata/pata_parport/comm.c
index 4c2f9ad60ad8a..cc5485bd0a5b6 100644
--- a/drivers/ata/pata_parport/comm.c
+++ b/drivers/ata/pata_parport/comm.c
@@ -1,12 +1,11 @@
-/* 
-        comm.c    (c) 1997-8  Grant R. Guenther <grant@torque.net>
-                              Under the terms of the GNU General Public License.
-
-	comm.c is a low-level protocol driver for some older models
-	of the DataStor "Commuter" parallel to IDE adapter.  Some of
-	the parallel port devices marketed by Arista currently
-	use this adapter.
-*/
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * (c) 1997-1998  Grant R. Guenther <grant@torque.net>
+ *
+ * comm.c is a low-level protocol driver for some older models of the DataStor
+ * "Commuter" parallel to IDE adapter. Some of the parallel port devices
+ * marketed by Arista currently use this adapter.
+ */
 
 #include <linux/module.h>
 #include <linux/init.h>
@@ -17,165 +16,172 @@
 #include <asm/io.h>
 #include "pata_parport.h"
 
-/* mode codes:  0  nybble reads, 8-bit writes
-                1  8-bit reads and writes
-                2  8-bit EPP mode
-*/
+/*
+ * mode codes:  0  nybble reads, 8-bit writes
+ *              1  8-bit reads and writes
+ *              2  8-bit EPP mode
+ */
 
-#define j44(a,b)	(((a>>3)&0x0f)|((b<<1)&0xf0))
+#define j44(a, b)	(((a >> 3) & 0x0f) | ((b << 1) & 0xf0))
 
 #define P1	w2(5);w2(0xd);w2(0xd);w2(5);w2(4);
 #define P2	w2(5);w2(7);w2(7);w2(5);w2(4);
 
-/* cont = 0 - access the IDE register file 
-   cont = 1 - access the IDE command set 
-*/
-
+/*
+ * cont = 0 - access the IDE register file
+ * cont = 1 - access the IDE command set
+ */
 static int  cont_map[2] = { 0x08, 0x10 };
 
 static int comm_read_regr(struct pi_adapter *pi, int cont, int regr)
-
-{       int     l, h, r;
+{
+	int l, h, r;
 
         r = regr + cont_map[cont];
 
-        switch (pi->mode)  {
+	switch (pi->mode) {
+	case 0:
+		w0(r); P1; w0(0);
+		w2(6); l = r1(); w0(0x80); h = r1(); w2(4);
+		return j44(l, h);
 
-        case 0: w0(r); P1; w0(0);
-        	w2(6); l = r1(); w0(0x80); h = r1(); w2(4);
-                return j44(l,h);
-
-        case 1: w0(r+0x20); P1; 
-        	w0(0); w2(0x26); h = r0(); w2(4);
-                return h;
+	case 1:
+		w0(r+0x20); P1;
+		w0(0); w2(0x26); h = r0(); w2(4);
+		return h;
 
 	case 2:
 	case 3:
-        case 4: w3(r+0x20); (void)r1();
-        	w2(0x24); h = r4(); w2(4);
-                return h;
+	case 4:
+		w3(r+0x20); (void)r1();
+		w2(0x24); h = r4(); w2(4);
+		return h;
+	}
 
-        }
-        return -1;
-}       
+	return -1;
+}
 
 static void comm_write_regr(struct pi_adapter *pi, int cont, int regr, int val)
+{
+	int r = regr + cont_map[cont];
 
-{       int  r;
-
-        r = regr + cont_map[cont];
-
-        switch (pi->mode)  {
-
-        case 0:
-        case 1: w0(r); P1; w0(val); P2;
+	switch (pi->mode) {
+	case 0:
+	case 1:
+		w0(r); P1; w0(val); P2;
 		break;
-
 	case 2:
 	case 3:
-        case 4: w3(r); (void)r1(); w4(val);
-                break;
-        }
+	case 4:
+		w3(r); (void)r1(); w4(val);
+		break;
+	}
 }
 
 static void comm_connect(struct pi_adapter *pi)
-
-{       pi->saved_r0 = r0();
-        pi->saved_r2 = r2();
-        w2(4); w0(0xff); w2(6);
-        w2(4); w0(0xaa); w2(6);
-        w2(4); w0(0x00); w2(6);
-        w2(4); w0(0x87); w2(6);
-        w2(4); w0(0xe0); w2(0xc); w2(0xc); w2(4);
+{
+	pi->saved_r0 = r0();
+	pi->saved_r2 = r2();
+	w2(4); w0(0xff); w2(6);
+	w2(4); w0(0xaa); w2(6);
+	w2(4); w0(0x00); w2(6);
+	w2(4); w0(0x87); w2(6);
+	w2(4); w0(0xe0); w2(0xc); w2(0xc); w2(4);
 }
 
 static void comm_disconnect(struct pi_adapter *pi)
 
-{       w2(0); w2(0); w2(0); w2(4); 
+{
+	w2(0); w2(0); w2(0); w2(4);
 	w0(pi->saved_r0);
-        w2(pi->saved_r2);
-} 
+	w2(pi->saved_r2);
+}
 
 static void comm_read_block(struct pi_adapter *pi, char *buf, int count)
-
-{       int     i, l, h;
-
-        switch (pi->mode) {
-        
-        case 0: w0(0x48); P1;
-                for(i=0;i<count;i++) {
-                        w0(0); w2(6); l = r1();
-                        w0(0x80); h = r1(); w2(4);
-                        buf[i] = j44(l,h);
-                }
-                break;
-
-        case 1: w0(0x68); P1; w0(0);
-                for(i=0;i<count;i++) {
-                        w2(0x26); buf[i] = r0(); w2(0x24);
-                }
+{
+	int i, l, h;
+
+	switch (pi->mode) {
+	case 0:
+		w0(0x48); P1;
+		for (i = 0; i < count; i++) {
+			w0(0); w2(6); l = r1();
+			w0(0x80); h = r1(); w2(4);
+			buf[i] = j44(l, h);
+		}
+		break;
+	case 1:
+		w0(0x68); P1; w0(0);
+		for (i = 0; i < count; i++) {
+			w2(0x26);
+			buf[i] = r0();
+			w2(0x24);
+		}
 		w2(4);
 		break;
-		
-	case 2: w3(0x68); (void)r1(); w2(0x24);
-		for (i=0;i<count;i++) buf[i] = r4();
+	case 2:
+		w3(0x68); (void)r1(); w2(0x24);
+		for (i = 0; i < count; i++)
+			buf[i] = r4();
+		w2(4);
+		break;
+	case 3:
+		w3(0x68); (void)r1(); w2(0x24);
+		for (i = 0; i < count / 2; i++)
+			((u16 *)buf)[i] = r4w();
+		w2(4);
+		break;
+	case 4:
+		w3(0x68); (void)r1(); w2(0x24);
+		for (i = 0; i < count / 4; i++)
+			((u32 *)buf)[i] = r4l();
 		w2(4);
 		break;
-
-        case 3: w3(0x68); (void)r1(); w2(0x24);
-                for (i=0;i<count/2;i++) ((u16 *)buf)[i] = r4w();
-                w2(4);
-                break;
-
-        case 4: w3(0x68); (void)r1(); w2(0x24);
-                for (i=0;i<count/4;i++) ((u32 *)buf)[i] = r4l();
-                w2(4);
-                break;
-		
 	}
 }
 
 /* NB: Watch out for the byte swapped writes ! */
-
 static void comm_write_block(struct pi_adapter *pi, char *buf, int count)
-
-{       int	k;
-
-        switch (pi->mode) {
-
-        case 0:
-        case 1: w0(0x68); P1;
-        	for (k=0;k<count;k++) {
-                        w2(5); w0(buf[k^1]); w2(7);
-                }
-                w2(5); w2(4);
-                break;
-
-        case 2: w3(0x48); (void)r1();
-                for (k=0;k<count;k++) w4(buf[k^1]);
-                break;
-
-        case 3: w3(0x48); (void)r1();
+{
+	int k;
+
+	switch (pi->mode) {
+	case 0:
+	case 1:
+		w0(0x68); P1;
+		for (k = 0; k < count; k++) {
+			w2(5);
+			w0(buf[k ^ 1]);
+			w2(7);
+		}
+		w2(5); w2(4);
+		break;
+	case 2:
+		w3(0x48); (void)r1();
+		for (k = 0; k < count; k++)
+			w4(buf[k ^ 1]);
+		break;
+	case 3:
+		w3(0x48); (void)r1();
 		for (k = 0; k < count / 2; k++)
 			w4w(swab16(((u16 *)buf)[k]));
-                break;
-
-        case 4: w3(0x48); (void)r1();
+		break;
+	case 4:
+		w3(0x48); (void)r1();
 		for (k = 0; k < count / 4; k++)
 			w4l(swab16(((u16 *)buf)[2 * k]) |
 			    swab16(((u16 *)buf)[2 * k + 1]) << 16);
-                break;
-
-
+		break;
         }
 }
 
 static void comm_log_adapter(struct pi_adapter *pi)
 
-{       char    *mode_string[5] = {"4-bit","8-bit","EPP-8","EPP-16","EPP-32"};
+{       char *mode_string[5] = { "4-bit", "8-bit", "EPP-8", "EPP-16", "EPP-32" };
 
-	dev_info(&pi->dev, "DataStor Commuter at 0x%x, mode %d (%s), delay %d\n",
-		pi->port, pi->mode, mode_string[pi->mode], pi->delay);
+	dev_info(&pi->dev,
+		 "DataStor Commuter at 0x%x, mode %d (%s), delay %d\n",
+		 pi->port, pi->mode, mode_string[pi->mode], pi->delay);
 }
 
 static struct pi_protocol comm = {
diff --git a/drivers/ata/pata_parport/dstr.c b/drivers/ata/pata_parport/dstr.c
index 2524684be206d..368d7c7962a90 100644
--- a/drivers/ata/pata_parport/dstr.c
+++ b/drivers/ata/pata_parport/dstr.c
@@ -1,11 +1,10 @@
-/* 
-        dstr.c    (c) 1997-8  Grant R. Guenther <grant@torque.net>
-                              Under the terms of the GNU General Public License.
-
-        dstr.c is a low-level protocol driver for the 
-        DataStor EP2000 parallel to IDE adapter chip.
-
-*/
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * (c) 1997-1998  Grant R. Guenther <grant@torque.net>
+ *
+ * dstr.c is a low-level protocol driver for the DataStor EP2000 parallel
+ * to IDE adapter chip.
+ */
 
 #include <linux/module.h>
 #include <linux/init.h>
@@ -16,178 +15,202 @@
 #include <asm/io.h>
 #include "pata_parport.h"
 
-/* mode codes:  0  nybble reads, 8-bit writes
-                1  8-bit reads and writes
-                2  8-bit EPP mode
-		3  EPP-16
-		4  EPP-32
-*/
+/*
+ * mode codes:  0  nybble reads, 8-bit writes
+ *		1  8-bit reads and writes
+ *		2  8-bit EPP mode
+ *		3  EPP-16
+ *		4  EPP-32
+ */
 
-#define j44(a,b)  (((a>>3)&0x07)|((~a>>4)&0x08)|((b<<1)&0x70)|((~b)&0x80))
+#define j44(a, b)  (((a >> 3) & 0x07) | ((~a >> 4) & 0x08) | \
+		    ((b << 1) & 0x70) | ((~b) & 0x80))
 
 #define P1	w2(5);w2(0xd);w2(5);w2(4);
 #define P2	w2(5);w2(7);w2(5);w2(4);
 #define P3      w2(6);w2(4);w2(6);w2(4);
 
-/* cont = 0 - access the IDE register file 
-   cont = 1 - access the IDE command set 
-*/
-
+/*
+ * cont = 0 - access the IDE register file
+ * cont = 1 - access the IDE command set
+ */
 static int  cont_map[2] = { 0x20, 0x40 };
 
 static int dstr_read_regr(struct pi_adapter *pi, int cont, int regr)
+{
+	int a, b, r;
 
-{       int     a, b, r;
-
-        r = regr + cont_map[cont];
+	r = regr + cont_map[cont];
 
 	w0(0x81); P1;
-	if (pi->mode) { w0(0x11); } else { w0(1); }
+	if (pi->mode)
+		w0(0x11);
+	else
+		w0(1);
 	P2; w0(r); P1;
 
-        switch (pi->mode)  {
-
-        case 0: w2(6); a = r1(); w2(4); w2(6); b = r1(); w2(4);
-                return j44(a,b);
-
-        case 1: w0(0); w2(0x26); a = r0(); w2(4);
-                return a;
-
+	switch (pi->mode) {
+	case 0:
+		w2(6); a = r1(); w2(4); w2(6); b = r1(); w2(4);
+		return j44(a, b);
+	case 1:
+		w0(0); w2(0x26); a = r0(); w2(4);
+		return a;
 	case 2:
 	case 3:
-        case 4: w2(0x24); a = r4(); w2(4);
-                return a;
+	case 4:
+		w2(0x24); a = r4(); w2(4);
+		return a;
+	}
 
-        }
-        return -1;
-}       
+	return -1;
+}
 
 static void dstr_write_regr(struct pi_adapter *pi, int cont, int regr, int val)
+{
+	int  r = regr + cont_map[cont];
 
-{       int  r;
-
-        r = regr + cont_map[cont];
-
-	w0(0x81); P1; 
-	if (pi->mode >= 2) { w0(0x11); } else { w0(1); }
+	w0(0x81); P1;
+	if (pi->mode >= 2)
+		w0(0x11);
+	else
+		w0(1);
 	P2; w0(r); P1;
-	
-        switch (pi->mode)  {
 
-        case 0:
-        case 1: w0(val); w2(5); w2(7); w2(5); w2(4);
+	switch (pi->mode)  {
+	case 0:
+	case 1:
+		w0(val); w2(5); w2(7); w2(5); w2(4);
 		break;
-
 	case 2:
 	case 3:
-        case 4: w4(val); 
-                break;
-        }
+	case 4:
+		w4(val);
+		break;
+	}
 }
 
-#define  CCP(x)  w0(0xff);w2(0xc);w2(4);\
-		 w0(0xaa);w0(0x55);w0(0);w0(0xff);w0(0x87);w0(0x78);\
-		 w0(x);w2(5);w2(4);
+#define  CCP(x)						\
+	do {						\
+		w0(0xff); w2(0xc); w2(4);		\
+		w0(0xaa); w0(0x55); w0(0); w0(0xff);	\
+		w0(0x87); w0(0x78);			\
+		w0(x); w2(5); w2(4);			\
+	} while (0)
 
 static void dstr_connect(struct pi_adapter *pi)
-
-{       pi->saved_r0 = r0();
-        pi->saved_r2 = r2();
-        w2(4); CCP(0xe0); w0(0xff);
+{
+	pi->saved_r0 = r0();
+	pi->saved_r2 = r2();
+	w2(4); CCP(0xe0); w0(0xff);
 }
 
 static void dstr_disconnect(struct pi_adapter *pi)
-
-{       CCP(0x30);
-        w0(pi->saved_r0);
-        w2(pi->saved_r2);
-} 
+{
+	CCP(0x30);
+	w0(pi->saved_r0);
+	w2(pi->saved_r2);
+}
 
 static void dstr_read_block(struct pi_adapter *pi, char *buf, int count)
-
-{       int     k, a, b;
+{
+	int k, a, b;
 
         w0(0x81); P1;
-        if (pi->mode) { w0(0x19); } else { w0(9); }
+	if (pi->mode)
+		w0(0x19);
+	else
+		w0(9);
 	P2; w0(0x82); P1; P3; w0(0x20); P1;
 
-        switch (pi->mode) {
-
-        case 0: for (k=0;k<count;k++) {
-                        w2(6); a = r1(); w2(4);
-                        w2(6); b = r1(); w2(4);
-                        buf[k] = j44(a,b);
-                } 
-                break;
-
-        case 1: w0(0);
-                for (k=0;k<count;k++) {
-                        w2(0x26); buf[k] = r0(); w2(0x24);
-                }
-                w2(4);
-                break;
-
-        case 2: w2(0x24); 
-                for (k=0;k<count;k++) buf[k] = r4();
-                w2(4);
-                break;
-
-        case 3: w2(0x24); 
-                for (k=0;k<count/2;k++) ((u16 *)buf)[k] = r4w();
-                w2(4);
-                break;
-
-        case 4: w2(0x24); 
-                for (k=0;k<count/4;k++) ((u32 *)buf)[k] = r4l();
-                w2(4);
-                break;
-
-        }
+	switch (pi->mode) {
+	case 0:
+		for (k = 0; k < count; k++) {
+			w2(6); a = r1(); w2(4);
+			w2(6); b = r1(); w2(4);
+			buf[k] = j44(a, b);
+		}
+		break;
+	case 1:
+		w0(0);
+		for (k = 0; k < count; k++) {
+			w2(0x26);
+			buf[k] = r0();
+			w2(0x24);
+		}
+		w2(4);
+		break;
+	case 2:
+		w2(0x24);
+		for (k = 0; k < count; k++)
+			buf[k] = r4();
+		w2(4);
+		break;
+	case 3:
+		w2(0x24);
+		for (k = 0; k < count / 2; k++)
+			((u16 *)buf)[k] = r4w();
+		w2(4);
+		break;
+	case 4:
+		w2(0x24);
+		for (k = 0; k < count / 4; k++)
+			((u32 *)buf)[k] = r4l();
+		w2(4);
+		break;
+	}
 }
 
 static void dstr_write_block(struct pi_adapter *pi, char *buf, int count)
+{
+	int k;
 
-{       int	k;
-
-        w0(0x81); P1;
-        if (pi->mode) { w0(0x19); } else { w0(9); }
-        P2; w0(0x82); P1; P3; w0(0x20); P1;
-
-        switch (pi->mode) {
-
-        case 0:
-        case 1: for (k=0;k<count;k++) {
-                        w2(5); w0(buf[k]); w2(7);
-                }
-                w2(5); w2(4);
-                break;
+	w0(0x81); P1;
+	if (pi->mode)
+		w0(0x19);
+	else
+		w0(9);
+	P2; w0(0x82); P1; P3; w0(0x20); P1;
 
-        case 2: w2(0xc5);
-                for (k=0;k<count;k++) w4(buf[k]);
+	switch (pi->mode) {
+	case 0:
+	case 1:
+		for (k = 0; k < count; k++) {
+			w2(5);
+			w0(buf[k]);
+			w2(7);
+		}
+		w2(5); w2(4);
+		break;
+	case 2:
+		w2(0xc5);
+		for (k = 0; k < count; k++)
+			w4(buf[k]);
 		w2(0xc4);
-                break;
-
-        case 3: w2(0xc5);
-                for (k=0;k<count/2;k++) w4w(((u16 *)buf)[k]);
-                w2(0xc4);
-                break;
-
-        case 4: w2(0xc5);
-                for (k=0;k<count/4;k++) w4l(((u32 *)buf)[k]);
-                w2(0xc4);
-                break;
-
-        }
+		break;
+	case 3:
+		w2(0xc5);
+		for (k = 0; k < count / 2; k++)
+			w4w(((u16 *)buf)[k]);
+		w2(0xc4);
+		break;
+	case 4:
+		w2(0xc5);
+		for (k = 0; k < count / 4; k++)
+			w4l(((u32 *)buf)[k]);
+		w2(0xc4);
+		break;
+	}
 }
 
-
 static void dstr_log_adapter(struct pi_adapter *pi)
 
-{       char    *mode_string[5] = {"4-bit","8-bit","EPP-8",
-				   "EPP-16","EPP-32"};
+{
+	char *mode_string[5] = { "4-bit", "8-bit", "EPP-8", "EPP-16", "EPP-32" };
 
-	dev_info(&pi->dev, "DataStor EP2000 at 0x%x, mode %d (%s), delay %d\n",
-		pi->port, pi->mode, mode_string[pi->mode], pi->delay);
+	dev_info(&pi->dev,
+		 "DataStor EP2000 at 0x%x, mode %d (%s), delay %d\n",
+		 pi->port, pi->mode, mode_string[pi->mode], pi->delay);
 }
 
 static struct pi_protocol dstr = {
diff --git a/drivers/ata/pata_parport/epat.c b/drivers/ata/pata_parport/epat.c
index b146999368ae8..016bd96bce899 100644
--- a/drivers/ata/pata_parport/epat.c
+++ b/drivers/ata/pata_parport/epat.c
@@ -1,13 +1,12 @@
-/* 
-        epat.c  (c) 1997-8  Grant R. Guenther <grant@torque.net>
-                            Under the terms of the GNU General Public License.
-
-	This is the low level protocol driver for the EPAT parallel
-        to IDE adapter from Shuttle Technologies.  This adapter is
-        used in many popular parallel port disk products such as the
-        SyQuest EZ drives, the Avatar Shark and the Imation SuperDisk.
-	
-*/
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * (c) 1997-1998  Grant R. Guenther <grant@torque.net>
+ *
+ * This is the low level protocol driver for the EPAT parallel
+ * to IDE adapter from Shuttle Technologies.  This adapter is
+ * used in many popular parallel port disk products such as the
+ * SyQuest EZ drives, the Avatar Shark and the Imation SuperDisk.
+ */
 
 #include <linux/module.h>
 #include <linux/init.h>
@@ -18,276 +17,313 @@
 #include <asm/io.h>
 #include "pata_parport.h"
 
-#define j44(a,b)		(((a>>4)&0x0f)+(b&0xf0))
-#define j53(a,b)		(((a>>3)&0x1f)+((b<<4)&0xe0))
+#define j44(a, b)	(((a >> 4) & 0x0f) + (b & 0xf0))
+#define j53(a, b)	(((a >> 3) & 0x1f) + ((b << 4) & 0xe0))
 
 static int epatc8;
 
 module_param(epatc8, int, 0);
-MODULE_PARM_DESC(epatc8, "support for the Shuttle EP1284 chip, "
-	"used in any recent Imation SuperDisk (LS-120) drive.");
-
-/* cont =  0   IDE register file
-   cont =  1   IDE control registers
-   cont =  2   internal EPAT registers
-*/
-
+MODULE_PARM_DESC(epatc8,
+		 "support for the Shuttle EP1284 chip, "
+		 "used in any recent Imation SuperDisk (LS-120) drive.");
+
+/*
+ * cont =  0   IDE register file
+ * cont =  1   IDE control registers
+ * cont =  2   internal EPAT registers
+ */
 static int cont_map[3] = { 0x18, 0x10, 0 };
 
 static void epat_write_regr(struct pi_adapter *pi, int cont, int regr, int val)
-
-{	int r;
-
-	r = regr + cont_map[cont];
+{
+	int r = regr + cont_map[cont];
 
 	switch (pi->mode) {
-
 	case 0:
 	case 1:
-	case 2:	w0(0x60+r); w2(1); w0(val); w2(4);
+	case 2:
+		w0(0x60+r); w2(1); w0(val); w2(4);
 		break;
-
 	case 3:
 	case 4:
-	case 5: w3(0x40+r); w4(val);
+	case 5:
+		w3(0x40+r); w4(val);
 		break;
-
 	}
 }
 
 static int epat_read_regr(struct pi_adapter *pi, int cont, int regr)
-
-{	int  a, b, r;
+{
+	int  a, b, r;
 
 	r = regr + cont_map[cont];
 
 	switch (pi->mode) {
 
-	case 0:	w0(r); w2(1); w2(3); 
+	case 0:
+		w0(r); w2(1); w2(3);
 		a = r1(); w2(4); b = r1();
-		return j44(a,b);
-
-	case 1: w0(0x40+r); w2(1); w2(4);
+		return j44(a, b);
+	case 1:
+		w0(0x40+r); w2(1); w2(4);
 		a = r1(); b = r2(); w0(0xff);
-		return j53(a,b);
-
-	case 2: w0(0x20+r); w2(1); w2(0x25);
+		return j53(a, b);
+	case 2:
+		w0(0x20+r); w2(1); w2(0x25);
 		a = r0(); w2(4);
 		return a;
-
 	case 3:
 	case 4:
-	case 5: w3(r); w2(0x24); a = r4(); w2(4);
+	case 5:
+		w3(r); w2(0x24); a = r4(); w2(4);
 		return a;
-
 	}
+
 	return -1;	/* never gets here */
 }
 
 static void epat_read_block(struct pi_adapter *pi, char *buf, int count)
-
-{	int  k, ph, a, b;
+{
+	int  k, ph, a, b;
 
 	switch (pi->mode) {
 
-	case 0:	w0(7); w2(1); w2(3); w0(0xff);
+	case 0:
+		w0(7); w2(1); w2(3); w0(0xff);
 		ph = 0;
-		for(k=0;k<count;k++) {
-			if (k == count-1) w0(0xfd);
-			w2(6+ph); a = r1();
-			if (a & 8) b = a; 
-			  else { w2(4+ph); b = r1(); }
-			buf[k] = j44(a,b);
+		for (k = 0; k < count; k++) {
+			if (k == count-1)
+				w0(0xfd);
+			w2(6 + ph); a = r1();
+			if (a & 8) {
+				b = a;
+			} else {
+				w2(4+ph); b = r1();
+			}
+			buf[k] = j44(a, b);
 			ph =  1 - ph;
 		}
 		w0(0); w2(4);
 		break;
 
-	case 1: w0(0x47); w2(1); w2(5); w0(0xff);
+	case 1:
+		w0(0x47); w2(1); w2(5); w0(0xff);
 		ph = 0;
-		for(k=0;k<count;k++) {
-			if (k == count-1) w0(0xfd); 
-			w2(4+ph);
+		for (k = 0; k < count; k++) {
+			if (k == count - 1)
+				w0(0xfd);
+			w2(4 + ph);
 			a = r1(); b = r2();
-			buf[k] = j53(a,b);
+			buf[k] = j53(a, b);
 			ph = 1 - ph;
 		}
 		w0(0); w2(4);
 		break;
 
-	case 2: w0(0x27); w2(1); w2(0x25); w0(0);
+	case 2:
+		w0(0x27); w2(1); w2(0x25); w0(0);
 		ph = 0;
-		for(k=0;k<count-1;k++) {
-			w2(0x24+ph);
+		for (k = 0; k < count - 1; k++) {
+			w2(0x24 + ph);
 			buf[k] = r0();
 			ph = 1 - ph;
 		}
-		w2(0x26); w2(0x27); buf[count-1] = r0(); 
+		w2(0x26); w2(0x27);
+		buf[count - 1] = r0();
 		w2(0x25); w2(4);
 		break;
 
-	case 3: w3(0x80); w2(0x24);
-		for(k=0;k<count-1;k++) buf[k] = r4();
-		w2(4); w3(0xa0); w2(0x24); buf[count-1] = r4();
+	case 3:
+		w3(0x80); w2(0x24);
+		for (k = 0; k < count - 1; k++)
+			buf[k] = r4();
+		w2(4); w3(0xa0); w2(0x24);
+		buf[count - 1] = r4();
 		w2(4);
 		break;
 
-	case 4: w3(0x80); w2(0x24);
-		for(k=0;k<(count/2)-1;k++) ((u16 *)buf)[k] = r4w();
-		buf[count-2] = r4();
-		w2(4); w3(0xa0); w2(0x24); buf[count-1] = r4();
+	case 4:
+		w3(0x80); w2(0x24);
+		for (k = 0; k < count / 2 - 1; k++)
+			((u16 *)buf)[k] = r4w();
+		buf[count - 2] = r4();
+		w2(4); w3(0xa0); w2(0x24);
+		buf[count - 1] = r4();
 		w2(4);
 		break;
 
-	case 5: w3(0x80); w2(0x24);
-		for(k=0;k<(count/4)-1;k++) ((u32 *)buf)[k] = r4l();
-		for(k=count-4;k<count-1;k++) buf[k] = r4();
-		w2(4); w3(0xa0); w2(0x24); buf[count-1] = r4();
+	case 5:
+		w3(0x80); w2(0x24);
+		for (k = 0; k < count / 4 - 1; k++)
+			((u32 *)buf)[k] = r4l();
+		for (k = count - 4; k < count - 1; k++)
+			buf[k] = r4();
+		w2(4); w3(0xa0); w2(0x24);
+		buf[count - 1] = r4();
 		w2(4);
 		break;
-
 	}
 }
 
 static void epat_write_block(struct pi_adapter *pi, char *buf, int count)
-
-{	int ph, k;
+{
+	int ph, k;
 
 	switch (pi->mode) {
-
 	case 0:
 	case 1:
-	case 2: w0(0x67); w2(1); w2(5);
+	case 2:
+		w0(0x67); w2(1); w2(5);
 		ph = 0;
-		for(k=0;k<count;k++) {
+		for (k = 0; k < count; k++) {
 		  	w0(buf[k]);
-			w2(4+ph);
+			w2(4 + ph);
 			ph = 1 - ph;
 		}
 		w2(7); w2(4);
 		break;
-
-	case 3: w3(0xc0); 
-		for(k=0;k<count;k++) w4(buf[k]);
+	case 3:
+		w3(0xc0);
+		for (k = 0; k < count; k++)
+			w4(buf[k]);
 		w2(4);
 		break;
-
-	case 4: w3(0xc0); 
-		for(k=0;k<(count/2);k++) w4w(((u16 *)buf)[k]);
+	case 4:
+		w3(0xc0);
+		for (k = 0; k < count / 2; k++)
+			w4w(((u16 *)buf)[k]);
 		w2(4);
 		break;
-
-	case 5: w3(0xc0); 
-		for(k=0;k<(count/4);k++) w4l(((u32 *)buf)[k]);
+	case 5:
+		w3(0xc0);
+		for (k = 0; k < count / 4; k++)
+			w4l(((u32 *)buf)[k]);
 		w2(4);
 		break;
-
 	}
 }
 
 /* these macros access the EPAT registers in native addressing */
 
-#define	WR(r,v)		epat_write_regr(pi,2,r,v)
-#define	RR(r)		(epat_read_regr(pi,2,r))
+#define	WR(r, v)	epat_write_regr(pi, 2, r, v)
+#define	RR(r)		epat_read_regr(pi, 2, r)
 
 /* and these access the IDE task file */
 
-#define WRi(r,v)         epat_write_regr(pi,0,r,v)
-#define RRi(r)           (epat_read_regr(pi,0,r))
+#define WRi(r, v)	epat_write_regr(pi, 0, r, v)
+#define RRi(r)		epat_read_regr(pi, 0, r)
 
 /* FIXME:  the CPP stuff should be fixed to handle multiple EPATs on a chain */
 
-#define CPP(x) 	w2(4);w0(0x22);w0(0xaa);w0(0x55);w0(0);w0(0xff);\
-                w0(0x87);w0(0x78);w0(x);w2(4);w2(5);w2(4);w0(0xff);
+#define CPP(x)					\
+	do {					\
+		w2(4); w0(0x22); w0(0xaa);	\
+		w0(0x55); w0(0); w0(0xff);	\
+		w0(0x87); w0(0x78); w0(x);	\
+		w2(4); w2(5); w2(4); w0(0xff);	\
+	} while (0)
 
 static void epat_connect(struct pi_adapter *pi)
-
-{       pi->saved_r0 = r0();
-        pi->saved_r2 = r2();
+{
+	pi->saved_r0 = r0();
+	pi->saved_r2 = r2();
 
  	/* Initialize the chip */
 	CPP(0);
 
 	if (epatc8) {
-		CPP(0x40);CPP(0xe0);
-		w0(0);w2(1);w2(4);
-		WR(0x8,0x12);WR(0xc,0x14);WR(0x12,0x10);
-		WR(0xe,0xf);WR(0xf,4);
+		CPP(0x40); CPP(0xe0);
+		w0(0); w2(1); w2(4);
+		WR(0x8, 0x12);
+		WR(0xc, 0x14);
+		WR(0x12, 0x10);
+		WR(0xe, 0xf);
+		WR(0xf, 4);
 		/* WR(0xe,0xa);WR(0xf,4); */
-		WR(0xe,0xd);WR(0xf,0);
+		WR(0xe, 0xd);
+		WR(0xf, 0);
 		/* CPP(0x30); */
 	}
 
         /* Connect to the chip */
 	CPP(0xe0);
-        w0(0);w2(1);w2(4); /* Idle into SPP */
+	w0(0); w2(1); w2(4); /* Idle into SPP */
         if (pi->mode >= 3) {
-          w0(0);w2(1);w2(4);w2(0xc);
-          /* Request EPP */
-          w0(0x40);w2(6);w2(7);w2(4);w2(0xc);w2(4);
+		w0(0); w2(1); w2(4); w2(0xc);
+		/* Request EPP */
+		w0(0x40); w2(6); w2(7); w2(4); w2(0xc); w2(4);
         }
 
 	if (!epatc8) {
-		WR(8,0x10); WR(0xc,0x14); WR(0xa,0x38); WR(0x12,0x10);
+		WR(8, 0x10);
+		WR(0xc, 0x14);
+		WR(0xa, 0x38);
+		WR(0x12, 0x10);
 	}
 }
 
 static void epat_disconnect(struct pi_adapter *pi)
-{	CPP(0x30);
+{
+	CPP(0x30);
 	w0(pi->saved_r0);
 	w2(pi->saved_r2);
 }
 
 static int epat_test_proto(struct pi_adapter *pi)
-
-{       int     k, j, f, cc;
-	int	e[2] = {0,0};
+{
+	int k, j, f, cc;
+	int e[2] = { 0, 0 };
 	char scratch[512];
 
-        epat_connect(pi);
+	epat_connect(pi);
 	cc = RR(0xd);
 	epat_disconnect(pi);
 
 	epat_connect(pi);
 	for (j=0;j<2;j++) {
-  	    WRi(6,0xa0+j*0x10);
-            for (k=0;k<256;k++) {
-                WRi(2,k^0xaa);
-                WRi(3,k^0x55);
-                if (RRi(2) != (k^0xaa)) e[j]++;
-                }
-	    }
-        epat_disconnect(pi);
-
-        f = 0;
-        epat_connect(pi);
-        WR(0x13,1); WR(0x13,0); WR(0xa,0x11);
-        epat_read_block(pi,scratch,512);
-	
-        for (k=0;k<256;k++) {
-            if ((scratch[2*k] & 0xff) != k) f++;
-            if ((scratch[2*k+1] & 0xff) != (0xff-k)) f++;
-        }
-        epat_disconnect(pi);
+		WRi(6, 0xa0 + j * 0x10);
+		for (k = 0; k < 256; k++) {
+			WRi(2, k ^ 0xaa);
+			WRi(3, k ^ 0x55);
+			if (RRi(2) != (k ^ 0xaa))
+				e[j]++;
+		}
+	}
+	epat_disconnect(pi);
 
-	dev_dbg(&pi->dev, "epat: port 0x%x, mode %d, ccr %x, test=(%d,%d,%d)\n",
-	       pi->port, pi->mode, cc, e[0], e[1], f);
-	
-        return (e[0] && e[1]) || f;
+	f = 0;
+	epat_connect(pi);
+	WR(0x13, 1); WR(0x13, 0); WR(0xa, 0x11);
+	epat_read_block(pi, scratch, 512);
+
+	for (k = 0; k < 256; k++) {
+		if ((scratch[2 * k] & 0xff) != k)
+			f++;
+		if ((scratch[2 * k + 1] & 0xff) != 0xff - k)
+			f++;
+	}
+	epat_disconnect(pi);
+
+	dev_dbg(&pi->dev,
+		"epat: port 0x%x, mode %d, ccr %x, test=(%d,%d,%d)\n",
+		pi->port, pi->mode, cc, e[0], e[1], f);
+
+	return (e[0] && e[1]) || f;
 }
 
 static void epat_log_adapter(struct pi_adapter *pi)
-
-{	int	ver;
-        char    *mode_string[6] = 
-		   {"4-bit","5/3","8-bit","EPP-8","EPP-16","EPP-32"};
+{
+	int ver;
+	char *mode_string[6] =
+		{ "4-bit", "5/3", "8-bit", "EPP-8", "EPP-16", "EPP-32" };
 
 	epat_connect(pi);
-	WR(0xa,0x38);		/* read the version code */
-        ver = RR(0xb);
-        epat_disconnect(pi);
+	WR(0xa, 0x38);		/* read the version code */
+	ver = RR(0xb);
+	epat_disconnect(pi);
 
-	dev_info(&pi->dev, "Shuttle EPAT chip %x at 0x%x, mode %d (%s), delay %d\n",
+	dev_info(&pi->dev,
+		 "Shuttle EPAT chip %x at 0x%x, mode %d (%s), delay %d\n",
 		 ver, pi->port, pi->mode, mode_string[pi->mode], pi->delay);
 }
 
diff --git a/drivers/ata/pata_parport/epia.c b/drivers/ata/pata_parport/epia.c
index f6db2f79fe999..920e9f40d4019 100644
--- a/drivers/ata/pata_parport/epia.c
+++ b/drivers/ata/pata_parport/epia.c
@@ -1,14 +1,13 @@
-/* 
-        epia.c    (c) 1997-8  Grant R. Guenther <grant@torque.net>
-                              Under the terms of the GNU General Public License.
-
-        epia.c is a low-level protocol driver for Shuttle Technologies 
-	EPIA parallel to IDE adapter chip.  This device is now obsolete
-	and has been replaced with the EPAT chip, which is supported
-	by epat.c, however, some devices based on EPIA are still
-	available.
-
-*/
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * (c) 1997-1998  Grant R. Guenther <grant@torque.net>
+ *
+ * epia.c is a low-level protocol driver for Shuttle Technologies
+ * EPIA parallel to IDE adapter chip.  This device is now obsolete
+ * and has been replaced with the EPAT chip, which is supported
+ * by epat.c, however, some devices based on EPIA are still
+ * available.
+ */
 
 #include <linux/module.h>
 #include <linux/init.h>
@@ -19,255 +18,274 @@
 #include <asm/io.h>
 #include "pata_parport.h"
 
-/* mode codes:  0  nybble reads on port 1, 8-bit writes
-                1  5/3 reads on ports 1 & 2, 8-bit writes
-                2  8-bit reads and writes
-                3  8-bit EPP mode
-		4  16-bit EPP
-		5  32-bit EPP
-*/
-
-#define j44(a,b)                (((a>>4)&0x0f)+(b&0xf0))
-#define j53(a,b)                (((a>>3)&0x1f)+((b<<4)&0xe0))
-
-/* cont =  0   IDE register file
-   cont =  1   IDE control registers
-*/
-
+/*
+ * mode codes:  0  nybble reads on port 1, 8-bit writes
+ *		1  5/3 reads on ports 1 & 2, 8-bit writes
+ *		2  8-bit reads and writes
+ *		3  8-bit EPP mode
+ *		4  16-bit EPP
+ *		5  32-bit EPP
+ */
+
+#define j44(a, b)	(((a >> 4) & 0x0f) + (b & 0xf0))
+#define j53(a, b)	(((a >> 3) & 0x1f) + ((b << 4) & 0xe0))
+
+/*
+ * cont =  0   IDE register file
+ * cont =  1   IDE control registers
+ */
 static int cont_map[2] = { 0, 0x80 };
 
 static int epia_read_regr(struct pi_adapter *pi, int cont, int regr)
-
-{       int     a, b, r;
+{
+	int a, b, r;
 
 	regr += cont_map[cont];
 
-        switch (pi->mode)  {
-
-        case 0: r = regr^0x39;
-                w0(r); w2(1); w2(3); w0(r);
-                a = r1(); w2(1); b = r1(); w2(4);
-                return j44(a,b);
-
-        case 1: r = regr^0x31;
-                w0(r); w2(1); w0(r&0x37); 
-                w2(3); w2(5); w0(r|0xf0);
-                a = r1(); b = r2(); w2(4);
-                return j53(a,b);
-
-        case 2: r = regr^0x29;
-                w0(r); w2(1); w2(0X21); w2(0x23); 
-                a = r0(); w2(4);
-                return a;
-
+	switch (pi->mode)  {
+	case 0:
+		r = regr ^ 0x39;
+		w0(r); w2(1); w2(3); w0(r);
+		a = r1(); w2(1); b = r1(); w2(4);
+		return j44(a, b);
+	case 1:
+		r = regr ^ 0x31;
+		w0(r); w2(1); w0(r & 0x37);
+		w2(3); w2(5); w0(r | 0xf0);
+		a = r1(); b = r2(); w2(4);
+		return j53(a, b);
+	case 2:
+		r = regr^0x29;
+		w0(r); w2(1); w2(0X21); w2(0x23);
+		a = r0(); w2(4);
+		return a;
 	case 3:
 	case 4:
-        case 5: w3(regr); w2(0x24); a = r4(); w2(4);
-                return a;
+	case 5:
+		w3(regr); w2(0x24); a = r4(); w2(4);
+		return a;
+	}
 
-        }
-        return -1;
-}       
+	return -1;
+}
 
 static void epia_write_regr(struct pi_adapter *pi, int cont, int regr, int val)
-
-{       int  r;
+{
+	int  r;
 
 	regr += cont_map[cont];
 
-        switch (pi->mode)  {
-
-        case 0:
-        case 1:
-        case 2: r = regr^0x19;
-                w0(r); w2(1); w0(val); w2(3); w2(4);
-                break;
-
+	switch (pi->mode)  {
+	case 0:
+	case 1:
+	case 2:
+		r = regr ^ 0x19;
+		w0(r); w2(1); w0(val); w2(3); w2(4);
+		break;
 	case 3:
 	case 4:
-        case 5: r = regr^0x40;
-                w3(r); w4(val); w2(4);
-                break;
-        }
+	case 5:
+		r = regr ^ 0x40;
+		w3(r); w4(val); w2(4);
+		break;
+	}
 }
 
-#define WR(r,v)         epia_write_regr(pi,0,r,v)
-#define RR(r)           (epia_read_regr(pi,0,r))
-
-/* The use of register 0x84 is entirely unclear - it seems to control
-   some EPP counters ...  currently we know about 3 different block
-   sizes:  the standard 512 byte reads and writes, 12 byte writes and 
-   2048 byte reads (the last two being used in the CDrom drivers.
-*/
+#define WR(r, v)	epia_write_regr(pi, 0, r, v)
+#define RR(r)		epia_read_regr(pi, 0, r)
 
+/*
+ * The use of register 0x84 is entirely unclear - it seems to control
+ * some EPP counters ...  currently we know about 3 different block
+ * sizes:  the standard 512 byte reads and writes, 12 byte writes and
+ * 2048 byte reads (the last two being used in the CDrom drivers.
+ */
 static void epia_connect(struct pi_adapter *pi)
-
-{       pi->saved_r0 = r0();
-        pi->saved_r2 = r2();
-
-        w2(4); w0(0xa0); w0(0x50); w0(0xc0); w0(0x30); w0(0xa0); w0(0);
-        w2(1); w2(4);
-        if (pi->mode >= 3) { 
-                w0(0xa); w2(1); w2(4); w0(0x82); w2(4); w2(0xc); w2(4);
-                w2(0x24); w2(0x26); w2(4);
-        }
-        WR(0x86,8);  
+{
+	pi->saved_r0 = r0();
+	pi->saved_r2 = r2();
+
+	w2(4); w0(0xa0); w0(0x50); w0(0xc0); w0(0x30); w0(0xa0); w0(0);
+	w2(1); w2(4);
+	if (pi->mode >= 3) {
+		w0(0xa); w2(1); w2(4); w0(0x82); w2(4); w2(0xc); w2(4);
+		w2(0x24); w2(0x26); w2(4);
+	}
+	WR(0x86, 8);
 }
 
 static void epia_disconnect(struct pi_adapter *pi)
-
-{       /* WR(0x84,0x10); */
-        w0(pi->saved_r0);
-        w2(1); w2(4);
-        w0(pi->saved_r0);
-        w2(pi->saved_r2);
-} 
+{
+	/* WR(0x84,0x10); */
+	w0(pi->saved_r0);
+	w2(1); w2(4);
+	w0(pi->saved_r0);
+	w2(pi->saved_r2);
+}
 
 static void epia_read_block(struct pi_adapter *pi, char *buf, int count)
 
-{       int     k, ph, a, b;
-
-        switch (pi->mode) {
-
-        case 0: w0(0x81); w2(1); w2(3); w0(0xc1);
-                ph = 1;
-                for (k=0;k<count;k++) {
-                        w2(2+ph); a = r1();
-                        w2(4+ph); b = r1();
-                        buf[k] = j44(a,b);
-                        ph = 1 - ph;
-                } 
-                w0(0); w2(4);
-                break;
-
-        case 1: w0(0x91); w2(1); w0(0x10); w2(3); 
-                w0(0x51); w2(5); w0(0xd1); 
-                ph = 1;
-                for (k=0;k<count;k++) {
-                        w2(4+ph);
-                        a = r1(); b = r2();
-                        buf[k] = j53(a,b);
-                        ph = 1 - ph;
-                }
-                w0(0); w2(4);
-                break;
-
-        case 2: w0(0x89); w2(1); w2(0x23); w2(0x21); 
-                ph = 1;
-                for (k=0;k<count;k++) {
-                        w2(0x24+ph);
-                        buf[k] = r0();
-                        ph = 1 - ph;
-                }
-                w2(6); w2(4);
-                break;
-
-        case 3: if (count > 512) WR(0x84,3);
+{
+	int k, ph, a, b;
+
+	switch (pi->mode) {
+	case 0:
+		w0(0x81); w2(1); w2(3); w0(0xc1);
+		ph = 1;
+		for (k = 0; k < count; k++) {
+			w2(2+ph); a = r1();
+			w2(4+ph); b = r1();
+			buf[k] = j44(a, b);
+			ph = 1 - ph;
+		}
+		w0(0); w2(4);
+		break;
+	case 1:
+		w0(0x91); w2(1); w0(0x10); w2(3);
+		w0(0x51); w2(5); w0(0xd1);
+		ph = 1;
+		for (k = 0; k < count; k++) {
+			w2(4 + ph);
+			a = r1(); b = r2();
+			buf[k] = j53(a, b);
+			ph = 1 - ph;
+		}
+		w0(0); w2(4);
+		break;
+	case 2:
+		w0(0x89); w2(1); w2(0x23); w2(0x21);
+		ph = 1;
+		for (k = 0; k < count; k++) {
+			w2(0x24 + ph);
+			buf[k] = r0();
+			ph = 1 - ph;
+		}
+		w2(6); w2(4);
+		break;
+	case 3:
+		if (count > 512)
+			WR(0x84, 3);
 		w3(0); w2(0x24);
-                for (k=0;k<count;k++) buf[k] = r4();
-                w2(4); WR(0x84,0);
-                break;
-
-        case 4: if (count > 512) WR(0x84,3);
+		for (k = 0; k < count; k++)
+			buf[k] = r4();
+		w2(4); WR(0x84, 0);
+		break;
+	case 4:
+		if (count > 512)
+			WR(0x84, 3);
 		w3(0); w2(0x24);
-		for (k=0;k<count/2;k++) ((u16 *)buf)[k] = r4w();
-                w2(4); WR(0x84,0);
-                break;
-
-        case 5: if (count > 512) WR(0x84,3);
+		for (k = 0; k < count / 2; k++)
+			((u16 *)buf)[k] = r4w();
+		w2(4); WR(0x84, 0);
+		break;
+	case 5:
+		if (count > 512)
+			WR(0x84, 3);
 		w3(0); w2(0x24);
-                for (k=0;k<count/4;k++) ((u32 *)buf)[k] = r4l();
-                w2(4); WR(0x84,0);
-                break;
-
-        }
+		for (k = 0; k < count / 4; k++)
+			((u32 *)buf)[k] = r4l();
+		w2(4); WR(0x84, 0);
+		break;
+	}
 }
 
 static void epia_write_block(struct pi_adapter *pi, char *buf, int count)
-
-{       int     ph, k, last, d;
-
-        switch (pi->mode) {
-
-        case 0:
-        case 1:
-        case 2: w0(0xa1); w2(1); w2(3); w2(1); w2(5);
-                ph = 0;  last = 0x8000;
-                for (k=0;k<count;k++) {
-                        d = buf[k];
-                        if (d != last) { last = d; w0(d); }
-                        w2(4+ph);
-                        ph = 1 - ph;
-                }
-                w2(7); w2(4);
-                break;
-
-        case 3: if (count < 512) WR(0x84,1);
+{
+	int ph, k, last, d;
+
+	switch (pi->mode) {
+	case 0:
+	case 1:
+	case 2:
+		w0(0xa1); w2(1); w2(3); w2(1); w2(5);
+		ph = 0;  last = 0x8000;
+		for (k = 0; k < count; k++) {
+			d = buf[k];
+			if (d != last) {
+				last = d;
+				w0(d);
+			}
+			w2(4 + ph);
+			ph = 1 - ph;
+		}
+		w2(7); w2(4);
+		break;
+	case 3:
+		if (count < 512)
+			WR(0x84, 1);
 		w3(0x40);
-                for (k=0;k<count;k++) w4(buf[k]);
-		if (count < 512) WR(0x84,0);
-                break;
-
-        case 4: if (count < 512) WR(0x84,1);
+		for (k = 0; k < count; k++)
+			w4(buf[k]);
+		if (count < 512)
+			WR(0x84, 0);
+		break;
+	case 4:
+		if (count < 512)
+			WR(0x84, 1);
 		w3(0x40);
-                for (k=0;k<count/2;k++) w4w(((u16 *)buf)[k]);
-		if (count < 512) WR(0x84,0);
-                break;
-
-        case 5: if (count < 512) WR(0x84,1);
+		for (k = 0; k < count / 2; k++)
+			w4w(((u16 *)buf)[k]);
+		if (count < 512)
+			WR(0x84, 0);
+		break;
+	case 5:
+		if (count < 512)
+			WR(0x84, 1);
 		w3(0x40);
-                for (k=0;k<count/4;k++) w4l(((u32 *)buf)[k]);
-		if (count < 512) WR(0x84,0);
-                break;
-
-        }
-
+		for (k = 0; k < count / 4; k++)
+			w4l(((u32 *)buf)[k]);
+		if (count < 512)
+			WR(0x84, 0);
+		break;
+	}
 }
 
 static int epia_test_proto(struct pi_adapter *pi)
-
-{       int     j, k, f;
-	int	e[2] = {0,0};
+{
+	int j, k, f;
+	int e[2] = { 0, 0 };
 	char scratch[512];
 
-        epia_connect(pi);
-        for (j=0;j<2;j++) {
-            WR(6,0xa0+j*0x10);
-            for (k=0;k<256;k++) {
-                WR(2,k^0xaa);
-                WR(3,k^0x55);
-                if (RR(2) != (k^0xaa)) e[j]++;
-                }
-	    WR(2,1); WR(3,1);
-            }
-        epia_disconnect(pi);
-
-        f = 0;
-        epia_connect(pi);
-        WR(0x84,8);
-        epia_read_block(pi,scratch,512);
-        for (k=0;k<256;k++) {
-            if ((scratch[2*k] & 0xff) != ((k+1) & 0xff)) f++;
-            if ((scratch[2*k+1] & 0xff) != ((-2-k) & 0xff)) f++;
-        }
-        WR(0x84,0);
-        epia_disconnect(pi);
+	epia_connect(pi);
+	for (j = 0; j < 2; j++) {
+		WR(6, 0xa0 + j * 0x10);
+		for (k = 0; k < 256; k++) {
+			WR(2, k ^ 0xaa);
+			WR(3, k ^ 0x55);
+			if (RR(2) != (k ^ 0xaa))
+				e[j]++;
+		}
+		WR(2, 1); WR(3, 1);
+	}
+	epia_disconnect(pi);
+
+	f = 0;
+	epia_connect(pi);
+	WR(0x84, 8);
+	epia_read_block(pi, scratch, 512);
+	for (k = 0; k < 256; k++) {
+		if ((scratch[2 * k] & 0xff) != ((k + 1) & 0xff))
+			f++;
+		if ((scratch[2 * k + 1] & 0xff) != ((-2 - k) & 0xff))
+			f++;
+	}
+	WR(0x84, 0);
+	epia_disconnect(pi);
 
 	dev_dbg(&pi->dev, "epia: port 0x%x, mode %d, test=(%d,%d,%d)\n",
-	       pi->port, pi->mode, e[0], e[1], f);
-        
-        return (e[0] && e[1]) || f;
+		pi->port, pi->mode, e[0], e[1], f);
 
+	return (e[0] && e[1]) || f;
 }
 
 
 static void epia_log_adapter(struct pi_adapter *pi)
+{
+	char *mode[6] = { "4-bit", "5/3", "8-bit", "EPP-8", "EPP-16", "EPP-32"};
 
-{       char    *mode_string[6] = {"4-bit","5/3","8-bit",
-				   "EPP-8","EPP-16","EPP-32"};
-
-	dev_info(&pi->dev, "Shuttle EPIA at 0x%x, mode %d (%s), delay %d\n",
-		pi->port, pi->mode, mode_string[pi->mode], pi->delay);
+	dev_info(&pi->dev,
+		 "Shuttle EPIA at 0x%x, mode %d (%s), delay %d\n",
+		 pi->port, pi->mode, mode[pi->mode], pi->delay);
 }
 
 static struct pi_protocol epia = {
diff --git a/drivers/ata/pata_parport/fit2.c b/drivers/ata/pata_parport/fit2.c
index fd3b2ce426a5f..6524f3033b1ef 100644
--- a/drivers/ata/pata_parport/fit2.c
+++ b/drivers/ata/pata_parport/fit2.c
@@ -1,17 +1,16 @@
-/* 
-        fit2.c        (c) 1998  Grant R. Guenther <grant@torque.net>
-                          Under the terms of the GNU General Public License.
-
-	fit2.c is a low-level protocol driver for the older version
-        of the Fidelity International Technology parallel port adapter.  
-	This adapter is used in their TransDisk 2000 and older TransDisk
-	3000 portable hard-drives.  As far as I can tell, this device
-	supports 4-bit mode _only_.  
-
-	Newer models of the FIT products use an enhanced protocol.
-	The "fit3" protocol module should support current drives.
-
-*/
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * (c) 1998  Grant R. Guenther <grant@torque.net>
+ *
+ * fit2.c is a low-level protocol driver for the older version
+ * of the Fidelity International Technology parallel port adapter.
+ * This adapter is used in their TransDisk 2000 and older TransDisk
+ * 3000 portable hard-drives.  As far as I can tell, this device
+ * supports 4-bit mode _only_.
+ *
+ * Newer models of the FIT products use an enhanced protocol.
+ * The "fit3" protocol module should support current drives.
+ */
 
 #include <linux/module.h>
 #include <linux/init.h>
@@ -22,99 +21,97 @@
 #include <asm/io.h>
 #include "pata_parport.h"
 
-#define j44(a,b)                (((a>>4)&0x0f)|(b&0xf0))
-
-/* cont = 0 - access the IDE register file 
-   cont = 1 - access the IDE command set 
+#define j44(a, b)	(((a >> 4) & 0x0f) | (b & 0xf0))
 
-NB:  The FIT adapter does not appear to use the control registers.
-So, we map ALT_STATUS to STATUS and NO-OP writes to the device
-control register - this means that IDE reset will not work on these
-devices.
-
-*/
+/*
+ * cont = 0 - access the IDE register file
+ * cont = 1 - access the IDE command set
+ *
+ * NB: The FIT adapter does not appear to use the control registers.
+ * So, we map ALT_STATUS to STATUS and NO-OP writes to the device
+ * control register - this means that IDE reset will not work on these
+ * devices.
+ */
 
 static void fit2_write_regr(struct pi_adapter *pi, int cont, int regr, int val)
-
-{	if (cont == 1) return;
+{
+	if (cont == 1)
+		return;
 	w2(0xc); w0(regr); w2(4); w0(val); w2(5); w0(0); w2(4);
 }
 
 static int fit2_read_regr(struct pi_adapter *pi, int cont, int regr)
-
-{	int  a, b, r;
+{
+	int  a, b, r;
 
 	if (cont) {
-	  if (regr != 6) return 0xff;
-	  r = 7;
-	} else r = regr + 0x10;
+		if (regr != 6)
+			return 0xff;
+		r = 7;
+	} else {
+		r = regr + 0x10;
+	}
 
-	w2(0xc); w0(r); w2(4); w2(5); 
-	         w0(0); a = r1();
-	         w0(1); b = r1();
+	w2(0xc); w0(r); w2(4); w2(5);
+	w0(0); a = r1();
+	w0(1); b = r1();
 	w2(4);
 
-	return j44(a,b);
-
+	return j44(a, b);
 }
 
 static void fit2_read_block(struct pi_adapter *pi, char *buf, int count)
-
-{	int  k, a, b, c, d;
+{
+	int  k, a, b, c, d;
 
 	w2(0xc); w0(0x10);
 
-	for (k=0;k<count/4;k++) {
-
+	for (k = 0; k < count / 4; k++) {
 		w2(4); w2(5);
 		w0(0); a = r1(); w0(1); b = r1();
-		w0(3); c = r1(); w0(2); d = r1(); 
-		buf[4*k+0] = j44(a,b);
-		buf[4*k+1] = j44(d,c);
-
-                w2(4); w2(5);
-                       a = r1(); w0(3); b = r1();
-                w0(1); c = r1(); w0(0); d = r1(); 
-                buf[4*k+2] = j44(d,c);
-                buf[4*k+3] = j44(a,b);
+		w0(3); c = r1(); w0(2); d = r1();
+		buf[4 * k + 0] = j44(a, b);
+		buf[4 * k + 1] = j44(d, c);
 
+		w2(4); w2(5);
+		a = r1(); w0(3); b = r1();
+		w0(1); c = r1(); w0(0); d = r1();
+		buf[4 * k + 2] = j44(d, c);
+		buf[4 * k + 3] = j44(a, b);
 	}
 
 	w2(4);
-
 }
 
 static void fit2_write_block(struct pi_adapter *pi, char *buf, int count)
+{
+	int k;
 
-{	int k;
-
-
-	w2(0xc); w0(0); 
-	for (k=0;k<count/2;k++) {
-		w2(4); w0(buf[2*k]); 
-		w2(5); w0(buf[2*k+1]);
+	w2(0xc); w0(0);
+	for (k = 0; k < count / 2; k++) {
+		w2(4); w0(buf[2 * k]);
+		w2(5); w0(buf[2 * k + 1]);
 	}
 	w2(4);
 }
 
 static void fit2_connect(struct pi_adapter *pi)
-
-{       pi->saved_r0 = r0();
-        pi->saved_r2 = r2();
-	w2(0xcc); 
+{
+	pi->saved_r0 = r0();
+	pi->saved_r2 = r2();
+	w2(0xcc);
 }
 
 static void fit2_disconnect(struct pi_adapter *pi)
-
-{       w0(pi->saved_r0);
-        w2(pi->saved_r2);
-} 
+{
+	w0(pi->saved_r0);
+	w2(pi->saved_r2);
+}
 
 static void fit2_log_adapter(struct pi_adapter *pi)
-
 {
 	dev_info(&pi->dev, "FIT 2000 adapter at 0x%x, delay %d\n",
-		pi->port, pi->delay);
+		 pi->port, pi->delay);
 
 }
 
diff --git a/drivers/ata/pata_parport/fit3.c b/drivers/ata/pata_parport/fit3.c
index 75df656ac472e..c172a38ae67d4 100644
--- a/drivers/ata/pata_parport/fit3.c
+++ b/drivers/ata/pata_parport/fit3.c
@@ -1,21 +1,20 @@
-/* 
-        fit3.c        (c) 1998  Grant R. Guenther <grant@torque.net>
-                          Under the terms of the GNU General Public License.
-
-	fit3.c is a low-level protocol driver for newer models 
-        of the Fidelity International Technology parallel port adapter.  
-	This adapter is used in their TransDisk 3000 portable 
-	hard-drives, as well as CD-ROM, PD-CD and other devices.
-
-	The TD-2000 and certain older devices use a different protocol.
-	Try the fit2 protocol module with them.
-
-        NB:  The FIT adapters do not appear to support the control 
-	registers.  So, we map ALT_STATUS to STATUS and NO-OP writes 
-	to the device control register - this means that IDE reset 
-	will not work on these devices.
-
-*/
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * (c) 1998  Grant R. Guenther <grant@torque.net>
+ *
+ * fit3.c is a low-level protocol driver for newer models
+ * of the Fidelity International Technology parallel port adapter.
+ * This adapter is used in their TransDisk 3000 portable
+ * hard-drives, as well as CD-ROM, PD-CD and other devices.
+ *
+ * The TD-2000 and certain older devices use a different protocol.
+ * Try the fit2 protocol module with them.
+ *
+ * NB:  The FIT adapters do not appear to support the control
+ * registers.  So, we map ALT_STATUS to STATUS and NO-OP writes
+ * to the device control register - this means that IDE reset
+ * will not work on these devices.
+ */
 
 #include <linux/module.h>
 #include <linux/init.h>
@@ -26,152 +25,155 @@
 #include <asm/io.h>
 #include "pata_parport.h"
 
-#define j44(a,b)                (((a>>3)&0x0f)|((b<<1)&0xf0))
-
-#define w7(byte)                {out_p(7,byte);}
-#define r7()                    (in_p(7) & 0xff)
+#define j44(a, b)	(((a >> 3) & 0x0f) | ((b << 1) & 0xf0))
 
-/* cont = 0 - access the IDE register file 
-   cont = 1 - access the IDE command set 
+#define w7(byte)	out_p(7, byte)
+#define r7()		(in_p(7) & 0xff)
 
-*/
+/*
+ * cont = 0 - access the IDE register file
+ * cont = 1 - access the IDE command set
+ */
 
 static void fit3_write_regr(struct pi_adapter *pi, int cont, int regr, int val)
-
-{	if (cont == 1) return;
+{
+	if (cont == 1)
+		return;
 
 	switch (pi->mode) {
-
 	case 0:
-	case 1: w2(0xc); w0(regr); w2(0x8); w2(0xc); 
-		w0(val); w2(0xd); 
+	case 1:
+		w2(0xc); w0(regr); w2(0x8); w2(0xc);
+		w0(val); w2(0xd);
 		w0(0);   w2(0xc);
 		break;
-
-	case 2: w2(0xc); w0(regr); w2(0x8); w2(0xc);
+	case 2:
+		w2(0xc); w0(regr); w2(0x8); w2(0xc);
 		w4(val); w4(0);
 		w2(0xc);
 		break;
-
 	}
 }
 
 static int fit3_read_regr(struct pi_adapter *pi, int cont, int regr)
-
-{	int  a, b;
+{
+	int  a, b;
 
 	if (cont) {
-	  if (regr != 6) return 0xff;
-	  regr = 7;
-	} 
+		if (regr != 6)
+			return 0xff;
+		regr = 7;
+	}
 
 	switch (pi->mode) {
-
-	case 0: w2(0xc); w0(regr + 0x10); w2(0x8); w2(0xc);
+	case 0:
+		w2(0xc); w0(regr + 0x10); w2(0x8); w2(0xc);
 		w2(0xd); a = r1();
-		w2(0xf); b = r1(); 
+		w2(0xf); b = r1();
 		w2(0xc);
-		return j44(a,b);
-
-	case 1: w2(0xc); w0(regr + 0x90); w2(0x8); w2(0xc);
-		w2(0xec); w2(0xee); w2(0xef); a = r0(); 
+		return j44(a, b);
+	case 1:
+		w2(0xc); w0(regr + 0x90); w2(0x8); w2(0xc);
+		w2(0xec); w2(0xee); w2(0xef); a = r0();
 		w2(0xc);
 		return a;
-
-	case 2: w2(0xc); w0(regr + 0x90); w2(0x8); w2(0xc); 
-		w2(0xec); 
-		a = r4(); b = r4(); 
+	case 2:
+		w2(0xc); w0(regr + 0x90); w2(0x8); w2(0xc);
+		w2(0xec);
+		a = r4(); b = r4();
 		w2(0xc);
 		return a;
-
 	}
-	return -1; 
 
+	return -1;
 }
 
 static void fit3_read_block(struct pi_adapter *pi, char *buf, int count)
-
-{	int  k, a, b, c, d;
+{
+	int  k, a, b, c, d;
 
 	switch (pi->mode) {
-
-	case 0: w2(0xc); w0(0x10); w2(0x8); w2(0xc);
-		for (k=0;k<count/2;k++) {
-		    w2(0xd); a = r1();
-		    w2(0xf); b = r1();
-		    w2(0xc); c = r1();
-		    w2(0xe); d = r1();
-		    buf[2*k  ] = j44(a,b);
-		    buf[2*k+1] = j44(c,d);
+	case 0:
+		w2(0xc); w0(0x10); w2(0x8); w2(0xc);
+		for (k = 0; k < count / 2; k++) {
+			w2(0xd); a = r1();
+			w2(0xf); b = r1();
+			w2(0xc); c = r1();
+			w2(0xe); d = r1();
+			buf[2 * k] = j44(a, b);
+			buf[2 * k + 1] = j44(c, d);
 		}
 		w2(0xc);
 		break;
-
-	case 1: w2(0xc); w0(0x90); w2(0x8); w2(0xc); 
+	case 1:
+		w2(0xc); w0(0x90); w2(0x8); w2(0xc);
 		w2(0xec); w2(0xee);
-		for (k=0;k<count/2;k++) {
-		    w2(0xef); a = r0();
-		    w2(0xee); b = r0();
-                    buf[2*k  ] = a;
-                    buf[2*k+1] = b;
+		for (k = 0; k < count / 2; k++) {
+			w2(0xef); a = r0();
+			w2(0xee); b = r0();
+			buf[2 * k] = a;
+			buf[2 * k + 1] = b;
 		}
-		w2(0xec); 
+		w2(0xec);
 		w2(0xc);
 		break;
-
-	case 2: w2(0xc); w0(0x90); w2(0x8); w2(0xc); 
-                w2(0xec);
-		for (k=0;k<count;k++) buf[k] = r4();
-                w2(0xc);
+	case 2:
+		w2(0xc); w0(0x90); w2(0x8); w2(0xc);
+		w2(0xec);
+		for (k = 0; k < count; k++)
+			buf[k] = r4();
+		w2(0xc);
 		break;
-
 	}
 }
 
 static void fit3_write_block(struct pi_adapter *pi, char *buf, int count)
+{
+	int k;
 
-{	int k;
-
-        switch (pi->mode) {
-
+	switch (pi->mode) {
 	case 0:
-        case 1: w2(0xc); w0(0); w2(0x8); w2(0xc);
-                for (k=0;k<count/2;k++) {
- 		    w0(buf[2*k  ]); w2(0xd);
- 		    w0(buf[2*k+1]); w2(0xc);
+	case 1:
+		w2(0xc); w0(0); w2(0x8); w2(0xc);
+		for (k = 0; k < count / 2; k++) {
+			w0(buf[2 * k]); w2(0xd);
+			w0(buf[2 * k + 1]); w2(0xc);
 		}
 		break;
-
-        case 2: w2(0xc); w0(0); w2(0x8); w2(0xc); 
-                for (k=0;k<count;k++) w4(buf[k]);
-                w2(0xc);
+	case 2:
+		w2(0xc); w0(0); w2(0x8); w2(0xc);
+		for (k = 0; k < count; k++)
+			w4(buf[k]);
+		w2(0xc);
 		break;
 	}
 }
 
 static void fit3_connect(struct pi_adapter *pi)
-
-{       pi->saved_r0 = r0();
-        pi->saved_r2 = r2();
+{
+	pi->saved_r0 = r0();
+	pi->saved_r2 = r2();
 	w2(0xc); w0(0); w2(0xa);
-	if (pi->mode == 2) { 
-		w2(0xc); w0(0x9); w2(0x8); w2(0xc); 
-		}
+	if (pi->mode == 2) {
+		w2(0xc); w0(0x9);
+		w2(0x8); w2(0xc);
+	}
 }
 
 static void fit3_disconnect(struct pi_adapter *pi)
-
-{       w2(0xc); w0(0xa); w2(0x8); w2(0xc);
+{
+	w2(0xc); w0(0xa); w2(0x8); w2(0xc);
 	w0(pi->saved_r0);
-        w2(pi->saved_r2);
-} 
+	w2(pi->saved_r2);
+}
 
 static void fit3_log_adapter(struct pi_adapter *pi)
+{
+	char *mode_string[3] = { "4-bit", "8-bit", "EPP"};
 
-{       char    *mode_string[3] = {"4-bit","8-bit","EPP"};
-
-	dev_info(&pi->dev, "FIT 3000 adapter at 0x%x, mode %d (%s), delay %d\n",
-		pi->port, pi->mode, mode_string[pi->mode], pi->delay);
+	dev_info(&pi->dev,
+		 "FIT 3000 adapter at 0x%x, mode %d (%s), delay %d\n",
+		 pi->port, pi->mode, mode_string[pi->mode], pi->delay);
 }
 
 static struct pi_protocol fit3 = {
diff --git a/drivers/ata/pata_parport/friq.c b/drivers/ata/pata_parport/friq.c
index 1647264cd9a8d..dc428f54fe0c3 100644
--- a/drivers/ata/pata_parport/friq.c
+++ b/drivers/ata/pata_parport/friq.c
@@ -1,24 +1,23 @@
-/* 
-	friq.c	(c) 1998    Grant R. Guenther <grant@torque.net>
-		            Under the terms of the GNU General Public License
-
-	friq.c is a low-level protocol driver for the Freecom "IQ"
-	parallel port IDE adapter.   Early versions of this adapter
-	use the 'frpw' protocol.
-	
-	Freecom uses this adapter in a battery powered external 
-	CD-ROM drive.  It is also used in LS-120 drives by
-	Maxell and Panasonic, and other devices.
-
-	The battery powered drive requires software support to
-	control the power to the drive.  This module enables the
-	drive power when the high level driver (pcd) is loaded
-	and disables it when the module is unloaded.  Note, if
-	the friq module is built in to the kernel, the power
-	will never be switched off, so other means should be
-	used to conserve battery power.
-
-*/
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * (c) 1998    Grant R. Guenther <grant@torque.net>
+ *
+ * friq.c is a low-level protocol driver for the Freecom "IQ"
+ * parallel port IDE adapter.   Early versions of this adapter
+ * use the 'frpw' protocol.
+ *
+ * Freecom uses this adapter in a battery powered external
+ * CD-ROM drive.  It is also used in LS-120 drives by
+ * Maxell and Panasonic, and other devices.
+ *
+ * The battery powered drive requires software support to
+ * control the power to the drive.  This module enables the
+ * drive power when the high level driver (pcd) is loaded
+ * and disables it when the module is unloaded.  Note, if
+ * the friq module is built in to the kernel, the power
+ * will never be switched off, so other means should be
+ * used to conserve battery power.
+ */
 
 #include <linux/module.h>
 #include <linux/init.h>
@@ -29,197 +28,206 @@
 #include <asm/io.h>
 #include "pata_parport.h"
 
-#define CMD(x)		w2(4);w0(0xff);w0(0xff);w0(0x73);w0(0x73);\
-			w0(0xc9);w0(0xc9);w0(0x26);w0(0x26);w0(x);w0(x);
+#define CMD(x)							\
+	do {							\
+		w2(4); w0(0xff); w0(0xff); w0(0x73); w0(0x73);	\
+		w0(0xc9); w0(0xc9); w0(0x26);			\
+		w0(0x26); w0(x); w0(x);				\
+	} while (0)
 
-#define j44(l,h)	(((l>>4)&0x0f)|(h&0xf0))
+#define j44(l, h)	(((l >> 4) & 0x0f) | (h & 0xf0))
 
-/* cont = 0 - access the IDE register file 
-   cont = 1 - access the IDE command set 
-*/
-
-static int  cont_map[2] = { 0x08, 0x10 };
+/*
+ * cont = 0 - access the IDE register file
+ * cont = 1 - access the IDE command set
+ */
+static int cont_map[2] = { 0x08, 0x10 };
 
 static int friq_read_regr(struct pi_adapter *pi, int cont, int regr)
-
-{	int	h,l,r;
+{
+	int h, l, r;
 
 	r = regr + cont_map[cont];
 
 	CMD(r);
 	w2(6); l = r1();
 	w2(4); h = r1();
-	w2(4); 
-
-	return j44(l,h);
+	w2(4);
 
+	return j44(l, h);
 }
 
 static void friq_write_regr(struct pi_adapter *pi, int cont, int regr, int val)
-
-{	int r;
-
-        r = regr + cont_map[cont];
+{
+	int r = regr + cont_map[cont];
 
 	CMD(r);
 	w0(val);
-	w2(5);w2(7);w2(5);w2(4);
+	w2(5); w2(7); w2(5); w2(4);
 }
 
 static void friq_read_block_int(struct pi_adapter *pi, char *buf, int count, int regr)
+{
+	int h, l, k, ph;
 
-{       int     h, l, k, ph;
-
-        switch(pi->mode) {
-
-        case 0: CMD(regr); 
-                for (k=0;k<count;k++) {
-                        w2(6); l = r1();
-                        w2(4); h = r1();
-                        buf[k] = j44(l,h);
-                }
-                w2(4);
-                break;
-
-        case 1: ph = 2;
-                CMD(regr+0xc0); 
-                w0(0xff);
-                for (k=0;k<count;k++) {
-                        w2(0xa4 + ph); 
-                        buf[k] = r0();
-                        ph = 2 - ph;
-                } 
-                w2(0xac); w2(0xa4); w2(4);
-                break;
-
-	case 2: CMD(regr+0x80);
-		for (k=0;k<count-2;k++) buf[k] = r4();
+	switch (pi->mode) {
+	case 0:
+		CMD(regr);
+		for (k = 0; k < count; k++) {
+			w2(6); l = r1();
+			w2(4); h = r1();
+			buf[k] = j44(l, h);
+		}
+		w2(4);
+		break;
+	case 1:
+		ph = 2;
+		CMD(regr + 0xc0);
+		w0(0xff);
+		for (k = 0; k < count; k++) {
+			w2(0xa4 + ph);
+			buf[k] = r0();
+			ph = 2 - ph;
+		}
+		w2(0xac); w2(0xa4); w2(4);
+		break;
+	case 2:
+		CMD(regr + 0x80);
+		for (k = 0; k < count - 2; k++)
+			buf[k] = r4();
 		w2(0xac); w2(0xa4);
-		buf[count-2] = r4();
-		buf[count-1] = r4();
+		buf[count - 2] = r4();
+		buf[count - 1] = r4();
 		w2(4);
 		break;
-
-	case 3: CMD(regr+0x80);
-                for (k=0;k<(count/2)-1;k++) ((u16 *)buf)[k] = r4w();
-                w2(0xac); w2(0xa4);
-                buf[count-2] = r4();
-                buf[count-1] = r4();
-                w2(4);
-                break;
-
-	case 4: CMD(regr+0x80);
-                for (k=0;k<(count/4)-1;k++) ((u32 *)buf)[k] = r4l();
-                buf[count-4] = r4();
-                buf[count-3] = r4();
-                w2(0xac); w2(0xa4);
-                buf[count-2] = r4();
-                buf[count-1] = r4();
-                w2(4);
-                break;
-
-        }
+	case 3:
+		CMD(regr + 0x80);
+		for (k = 0; k < count / 2 - 1; k++)
+			((u16 *)buf)[k] = r4w();
+		w2(0xac); w2(0xa4);
+		buf[count - 2] = r4();
+		buf[count - 1] = r4();
+		w2(4);
+		break;
+	case 4:
+		CMD(regr + 0x80);
+		for (k = 0; k < count / 4 - 1; k++)
+			((u32 *)buf)[k] = r4l();
+		buf[count - 4] = r4();
+		buf[count - 3] = r4();
+		w2(0xac); w2(0xa4);
+		buf[count - 2] = r4();
+		buf[count - 1] = r4();
+		w2(4);
+		break;
+	}
 }
 
 static void friq_read_block(struct pi_adapter *pi, char *buf, int count)
-
-{	friq_read_block_int(pi,buf,count,0x08);
+{
+	friq_read_block_int(pi, buf, count, 0x08);
 }
 
 static void friq_write_block(struct pi_adapter *pi, char *buf, int count)
- 
-{	int	k;
-
-	switch(pi->mode) {
+{
+	int k;
 
+	switch (pi->mode) {
 	case 0:
-	case 1: CMD(8); w2(5);
-        	for (k=0;k<count;k++) {
+	case 1:
+		CMD(8); w2(5);
+		for (k = 0; k < count; k++) {
 			w0(buf[k]);
-			w2(7);w2(5);
+			w2(7); w2(5);
 		}
 		w2(4);
 		break;
-
-	case 2: CMD(0xc8); w2(5);
-		for (k=0;k<count;k++) w4(buf[k]);
+	case 2:
+		CMD(0xc8); w2(5);
+		for (k = 0; k < count; k++)
+			w4(buf[k]);
+		w2(4);
+		break;
+	case 3:
+		CMD(0xc8); w2(5);
+		for (k = 0; k < count / 2; k++)
+			w4w(((u16 *)buf)[k]);
+		w2(4);
+		break;
+	case 4:
+		CMD(0xc8); w2(5);
+		for (k = 0; k < count / 4; k++)
+			w4l(((u32 *)buf)[k]);
 		w2(4);
 		break;
-
-        case 3: CMD(0xc8); w2(5);
-                for (k=0;k<count/2;k++) w4w(((u16 *)buf)[k]);
-                w2(4);
-                break;
-
-        case 4: CMD(0xc8); w2(5);
-                for (k=0;k<count/4;k++) w4l(((u32 *)buf)[k]);
-                w2(4);
-                break;
-	}
+}
 }
 
 static void friq_connect(struct pi_adapter *pi)
-
-{       pi->saved_r0 = r0();
-        pi->saved_r2 = r2();
+{
+	pi->saved_r0 = r0();
+	pi->saved_r2 = r2();
 	w2(4);
 }
 
 static void friq_disconnect(struct pi_adapter *pi)
-
-{       CMD(0x20);
+{
+	CMD(0x20);
 	w0(pi->saved_r0);
-        w2(pi->saved_r2);
-} 
+	w2(pi->saved_r2);
+}
 
 static int friq_test_proto(struct pi_adapter *pi)
-
-{       int     j, k, r;
-	int	e[2] = {0,0};
+{
+	int j, k, r;
+	int e[2] = { 0, 0 };
 	char scratch[512];
 
-	pi->saved_r0 = r0();	
+	pi->saved_r0 = r0();
 	w0(0xff); udelay(20); CMD(0x3d); /* turn the power on */
 	udelay(500);
 	w0(pi->saved_r0);
 
 	friq_connect(pi);
-	for (j=0;j<2;j++) {
-                friq_write_regr(pi,0,6,0xa0+j*0x10);
-                for (k=0;k<256;k++) {
-                        friq_write_regr(pi,0,2,k^0xaa);
-                        friq_write_regr(pi,0,3,k^0x55);
-                        if (friq_read_regr(pi,0,2) != (k^0xaa)) e[j]++;
-                        }
-                }
+	for (j = 0; j < 2; j++) {
+		friq_write_regr(pi, 0, 6, 0xa0 + j * 0x10);
+		for (k = 0; k < 256; k++) {
+			friq_write_regr(pi, 0, 2, k ^ 0xaa);
+			friq_write_regr(pi, 0, 3, k ^ 0x55);
+			if (friq_read_regr(pi, 0, 2) != (k ^ 0xaa))
+				e[j]++;
+		}
+	}
 	friq_disconnect(pi);
 
 	friq_connect(pi);
-        friq_read_block_int(pi,scratch,512,0x10);
-        r = 0;
-        for (k=0;k<128;k++) if (scratch[k] != k) r++;
+	friq_read_block_int(pi, scratch, 512, 0x10);
+	r = 0;
+	for (k = 0; k < 128; k++) {
+		if (scratch[k] != k)
+			r++;
+	}
 	friq_disconnect(pi);
 
-	dev_dbg(&pi->dev, "friq: port 0x%x, mode %d, test=(%d,%d,%d)\n",
-	       pi->port, pi->mode, e[0], e[1], r);
+	dev_dbg(&pi->dev,
+		"friq: port 0x%x, mode %d, test=(%d,%d,%d)\n",
+		pi->port, pi->mode, e[0], e[1], r);
 
-        return (r || (e[0] && e[1]));
+	return r || (e[0] && e[1]);
 }
 
-
 static void friq_log_adapter(struct pi_adapter *pi)
+{
+	char *mode_string[6] = { "4-bit", "8-bit", "EPP-8", "EPP-16", "EPP-32"};
 
-{       char    *mode_string[6] = {"4-bit","8-bit",
-				   "EPP-8","EPP-16","EPP-32"};
-
-	dev_info(&pi->dev, "Freecom IQ ASIC-2 adapter at 0x%x, mode %d (%s), delay %d\n",
-		pi->port, pi->mode, mode_string[pi->mode], pi->delay);
+	dev_info(&pi->dev,
+		 "Freecom IQ ASIC-2 adapter at 0x%x, mode %d (%s), delay %d\n",
+		 pi->port, pi->mode, mode_string[pi->mode], pi->delay);
 
 	pi->private = 1;
 	friq_connect(pi);
 	CMD(0x9e);  		/* disable sleep timer */
 	friq_disconnect(pi);
-
 }
 
 static void friq_release_proto(struct pi_adapter *pi)
diff --git a/drivers/ata/pata_parport/frpw.c b/drivers/ata/pata_parport/frpw.c
index 3ec0abf16fa6f..28d9bb2c6baff 100644
--- a/drivers/ata/pata_parport/frpw.c
+++ b/drivers/ata/pata_parport/frpw.c
@@ -1,17 +1,15 @@
-/* 
-	frpw.c	(c) 1996-8  Grant R. Guenther <grant@torque.net>
-		            Under the terms of the GNU General Public License
-
-	frpw.c is a low-level protocol driver for the Freecom "Power"
-	parallel port IDE adapter.
-	
-	Some applications of this adapter may require a "printer" reset
-	prior to loading the driver.  This can be done by loading and
-	unloading the "lp" driver, or it can be done by this driver
-	if you define FRPW_HARD_RESET.  The latter is not recommended
-	as it may upset devices on other ports.
-
-*/
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * (c) 1996-1998  Grant R. Guenther <grant@torque.net>
+ *
+ * frpw.c is a low-level protocol driver for the Freecom "Power" parallel port
+ * IDE adapter.
+ *
+ * Some applications of this adapter may require a "printer" reset prior to
+ * loading the driver.  This can be done by loading and unloading the "lp"
+ * driver, or it can be done by this driver if you define FRPW_HARD_RESET.
+ * The latter is not recommended as it may upset devices on other ports.
+ */
 
 #include <linux/module.h>
 #include <linux/init.h>
@@ -25,15 +23,15 @@
 #define cec4		w2(0xc);w2(0xe);w2(0xe);w2(0xc);w2(4);w2(4);w2(4);
 #define j44(l,h)	(((l>>4)&0x0f)|(h&0xf0))
 
-/* cont = 0 - access the IDE register file 
-   cont = 1 - access the IDE command set 
-*/
-
+/*
+ * cont = 0 - access the IDE register file
+ * cont = 1 - access the IDE command set
+ */
 static int  cont_map[2] = { 0x08, 0x10 };
 
 static int frpw_read_regr(struct pi_adapter *pi, int cont, int regr)
-
-{	int	h,l,r;
+{
+	int h, l, r;
 
 	r = regr + cont_map[cont];
 
@@ -41,145 +39,156 @@ static int frpw_read_regr(struct pi_adapter *pi, int cont, int regr)
 	w0(r); cec4;
 	w2(6); l = r1();
 	w2(4); h = r1();
-	w2(4); 
-
-	return j44(l,h);
+	w2(4);
 
+	return j44(l, h);
 }
 
 static void frpw_write_regr(struct pi_adapter *pi, int cont, int regr, int val)
+{
+	int r = regr + cont_map[cont];
 
-{	int r;
-
-        r = regr + cont_map[cont];
-
-	w2(4); w0(r); cec4; 
+	w2(4); w0(r); cec4;
 	w0(val);
-	w2(5);w2(7);w2(5);w2(4);
+	w2(5); w2(7); w2(5); w2(4);
 }
 
-static void frpw_read_block_int(struct pi_adapter *pi, char *buf, int count, int regr)
-
-{       int     h, l, k, ph;
-
-        switch(pi->mode) {
-
-        case 0: w2(4); w0(regr); cec4;
-                for (k=0;k<count;k++) {
-                        w2(6); l = r1();
-                        w2(4); h = r1();
-                        buf[k] = j44(l,h);
-                }
-                w2(4);
-                break;
-
-        case 1: ph = 2;
-                w2(4); w0(regr + 0xc0); cec4;
-                w0(0xff);
-                for (k=0;k<count;k++) {
-                        w2(0xa4 + ph); 
-                        buf[k] = r0();
-                        ph = 2 - ph;
-                } 
-                w2(0xac); w2(0xa4); w2(4);
-                break;
-
-        case 2: w2(4); w0(regr + 0x80); cec4;
-                for (k=0;k<count;k++) buf[k] = r4();
-                w2(0xac); w2(0xa4);
-                w2(4);
-                break;
-
-	case 3: w2(4); w0(regr + 0x80); cec4;
-		for (k=0;k<count-2;k++) buf[k] = r4();
+static void frpw_read_block_int(struct pi_adapter *pi, char *buf, int count,
+				int regr)
+{
+	int h, l, k, ph;
+
+	switch (pi->mode) {
+	case 0:
+		w2(4); w0(regr); cec4;
+		for (k = 0; k < count; k++) {
+			w2(6); l = r1();
+			w2(4); h = r1();
+			buf[k] = j44(l, h);
+		}
+		w2(4);
+		break;
+
+	case 1:
+		ph = 2;
+		w2(4); w0(regr + 0xc0); cec4;
+		w0(0xff);
+		for (k = 0; k < count; k++) {
+			w2(0xa4 + ph);
+			buf[k] = r0();
+			ph = 2 - ph;
+		}
+		w2(0xac); w2(0xa4); w2(4);
+		break;
+
+	case 2:
+		w2(4); w0(regr + 0x80); cec4;
+		for (k = 0; k < count; k++)
+			buf[k] = r4();
 		w2(0xac); w2(0xa4);
-		buf[count-2] = r4();
-		buf[count-1] = r4();
 		w2(4);
 		break;
 
-	case 4: w2(4); w0(regr + 0x80); cec4;
-                for (k=0;k<(count/2)-1;k++) ((u16 *)buf)[k] = r4w();
-                w2(0xac); w2(0xa4);
-                buf[count-2] = r4();
-                buf[count-1] = r4();
-                w2(4);
-                break;
-
-	case 5: w2(4); w0(regr + 0x80); cec4;
-                for (k=0;k<(count/4)-1;k++) ((u32 *)buf)[k] = r4l();
-                buf[count-4] = r4();
-                buf[count-3] = r4();
-                w2(0xac); w2(0xa4);
-                buf[count-2] = r4();
-                buf[count-1] = r4();
-                w2(4);
-                break;
+	case 3:
+		w2(4); w0(regr + 0x80); cec4;
+		for (k = 0; k < count - 2; k++)
+			buf[k] = r4();
+		w2(0xac); w2(0xa4);
+		buf[count - 2] = r4();
+		buf[count - 1] = r4();
+		w2(4);
+		break;
+
+	case 4:
+		w2(4); w0(regr + 0x80); cec4;
+		for (k = 0; k < count / 2 - 1; k++)
+			((u16 *)buf)[k] = r4w();
+		w2(0xac); w2(0xa4);
+		buf[count - 2] = r4();
+		buf[count - 1] = r4();
+		w2(4);
+		break;
 
+	case 5:
+		w2(4); w0(regr + 0x80); cec4;
+		for (k = 0; k < count / 4 - 1; k++)
+			((u32 *)buf)[k] = r4l();
+		buf[count - 4] = r4();
+		buf[count - 3] = r4();
+		w2(0xac); w2(0xa4);
+		buf[count - 2] = r4();
+		buf[count - 1] = r4();
+		w2(4);
+		break;
         }
 }
 
 static void frpw_read_block(struct pi_adapter *pi, char *buf, int count)
-
-{	frpw_read_block_int(pi,buf,count,0x08);
+{
+	frpw_read_block_int(pi, buf, count, 0x08);
 }
 
 static void frpw_write_block(struct pi_adapter *pi, char *buf, int count)
- 
-{	int	k;
-
-	switch(pi->mode) {
+{
+	int k;
 
+	switch (pi->mode) {
 	case 0:
 	case 1:
-	case 2: w2(4); w0(8); cec4; w2(5);
-        	for (k=0;k<count;k++) {
+	case 2:
+		w2(4); w0(8); cec4; w2(5);
+		for (k = 0; k < count; k++) {
 			w0(buf[k]);
-			w2(7);w2(5);
+			w2(7); w2(5);
 		}
 		w2(4);
 		break;
 
-	case 3: w2(4); w0(0xc8); cec4; w2(5);
-		for (k=0;k<count;k++) w4(buf[k]);
+	case 3:
+		w2(4); w0(0xc8); cec4; w2(5);
+		for (k = 0; k < count; k++)
+			w4(buf[k]);
 		w2(4);
 		break;
 
-        case 4: w2(4); w0(0xc8); cec4; w2(5);
-                for (k=0;k<count/2;k++) w4w(((u16 *)buf)[k]);
-                w2(4);
-                break;
+	case 4:
+		w2(4); w0(0xc8); cec4; w2(5);
+		for (k = 0; k < count / 2; k++)
+			w4w(((u16 *)buf)[k]);
+		w2(4);
+		break;
 
-        case 5: w2(4); w0(0xc8); cec4; w2(5);
-                for (k=0;k<count/4;k++) w4l(((u32 *)buf)[k]);
-                w2(4);
-                break;
+	case 5:
+		w2(4); w0(0xc8); cec4; w2(5);
+		for (k = 0; k < count / 4; k++)
+			w4l(((u32 *)buf)[k]);
+		w2(4);
+		break;
 	}
 }
 
 static void frpw_connect(struct pi_adapter *pi)
-
-{       pi->saved_r0 = r0();
-        pi->saved_r2 = r2();
+{
+	pi->saved_r0 = r0();
+	pi->saved_r2 = r2();
 	w2(4);
 }
 
 static void frpw_disconnect(struct pi_adapter *pi)
-
-{       w2(4); w0(0x20); cec4;
+{
+	w2(4); w0(0x20); cec4;
 	w0(pi->saved_r0);
-        w2(pi->saved_r2);
-} 
-
-/* Stub logic to see if PNP string is available - used to distinguish
-   between the Xilinx and ASIC implementations of the Freecom adapter.
-*/
+	w2(pi->saved_r2);
+}
 
+/*
+ * Stub logic to see if PNP string is available - used to distinguish
+ * between the Xilinx and ASIC implementations of the Freecom adapter.
+ * returns chip_type:   0 = Xilinx, 1 = ASIC
+ */
 static int frpw_test_pnp(struct pi_adapter *pi)
-
-/*  returns chip_type:   0 = Xilinx, 1 = ASIC   */
-
-{	int olddelay, a, b;
+{
+	int olddelay, a, b;
 
 #ifdef FRPW_HARD_RESET
         w0(0); w2(8); udelay(50); w2(0xc);   /* parallel bus reset */
@@ -191,7 +200,7 @@ static int frpw_test_pnp(struct pi_adapter *pi)
 
 	pi->saved_r0 = r0();
         pi->saved_r2 = r2();
-	
+
 	w2(4); w0(4); w2(6); w2(7);
 	a = r1() & 0xff; w2(4); b = r1() & 0xff;
 	w2(0xc); w2(0xe); w2(4);
@@ -200,65 +209,70 @@ static int frpw_test_pnp(struct pi_adapter *pi)
         w0(pi->saved_r0);
         w2(pi->saved_r2);
 
-	return ((~a&0x40) && (b&0x40));
-} 
-
-/* We use the pi->private to remember the result of the PNP test.
-   To make this work, private = port*2 + chip.  Yes, I know it's
-   a hack :-(
-*/
+	return ((~a & 0x40) && (b & 0x40));
+}
 
+/*
+ * We use the pi->private to remember the result of the PNP test.
+ * To make this work, private = port*2 + chip.  Yes, I know it's a hack :-(
+ */
 static int frpw_test_proto(struct pi_adapter *pi)
-
-{       int     j, k, r;
-	int	e[2] = {0,0};
+{
+	int j, k, r;
+	int e[2] = { 0, 0 };
 	char scratch[512];
 
-	if ((pi->private>>1) != pi->port)
-	   pi->private = frpw_test_pnp(pi) + 2*pi->port;
+	if ((pi->private >> 1) != pi->port)
+		pi->private = frpw_test_pnp(pi) + 2*pi->port;
 
-	if (((pi->private%2) == 0) && (pi->mode > 2)) {
-		dev_dbg(&pi->dev, "frpw: Xilinx does not support mode %d\n", pi->mode);
-	   return 1;
+	if (((pi->private & 0x1) == 0) && (pi->mode > 2)) {
+		dev_dbg(&pi->dev,
+			"frpw: Xilinx does not support mode %d\n", pi->mode);
+		return 1;
 	}
 
-	if (((pi->private%2) == 1) && (pi->mode == 2)) {
+	if (((pi->private & 0x1) == 1) && (pi->mode == 2)) {
 		dev_dbg(&pi->dev, "frpw: ASIC does not support mode 2\n");
-	   return 1;
+		return 1;
 	}
 
 	frpw_connect(pi);
-	for (j=0;j<2;j++) {
-                frpw_write_regr(pi,0,6,0xa0+j*0x10);
-                for (k=0;k<256;k++) {
-                        frpw_write_regr(pi,0,2,k^0xaa);
-                        frpw_write_regr(pi,0,3,k^0x55);
-                        if (frpw_read_regr(pi,0,2) != (k^0xaa)) e[j]++;
-                        }
-                }
+	for (j = 0; j < 2; j++) {
+		frpw_write_regr(pi, 0, 6, 0xa0 + j * 0x10);
+		for (k = 0; k < 256; k++) {
+			frpw_write_regr(pi, 0, 2, k ^ 0xaa);
+			frpw_write_regr(pi, 0, 3, k ^ 0x55);
+			if (frpw_read_regr(pi, 0, 2) != (k ^ 0xaa))
+				e[j]++;
+		}
+	}
 	frpw_disconnect(pi);
 
 	frpw_connect(pi);
-        frpw_read_block_int(pi,scratch,512,0x10);
-        r = 0;
-        for (k=0;k<128;k++) if (scratch[k] != k) r++;
+	frpw_read_block_int(pi, scratch, 512, 0x10);
+	r = 0;
+	for (k = 0; k < 128; k++) {
+		if (scratch[k] != k)
+			r++;
+	}
 	frpw_disconnect(pi);
 
-	dev_dbg(&pi->dev, "frpw: port 0x%x, chip %ld, mode %d, test=(%d,%d,%d)\n",
-	       pi->port, (pi->private%2), pi->mode, e[0], e[1], r);
+	dev_dbg(&pi->dev,
+		"frpw: port 0x%x, chip %ld, mode %d, test=(%d,%d,%d)\n",
+		pi->port, (pi->private%2), pi->mode, e[0], e[1], r);
 
-        return (r || (e[0] && e[1]));
+	return r || (e[0] && e[1]);
 }
 
-
 static void frpw_log_adapter(struct pi_adapter *pi)
 
-{       char    *mode_string[6] = {"4-bit","8-bit","EPP",
-				   "EPP-8","EPP-16","EPP-32"};
+{
+	char *mode[6] = { "4-bit", "8-bit", "EPP", "EPP-8", "EPP-16", "EPP-32"};
 
-	dev_info(&pi->dev, "Freecom (%s) adapter at 0x%x, mode %d (%s), delay %d\n",
-		((pi->private % 2) == 0) ? "Xilinx" : "ASIC",
-		pi->port, pi->mode, mode_string[pi->mode], pi->delay);
+	dev_info(&pi->dev,
+		 "Freecom (%s) adapter at 0x%x, mode %d (%s), delay %d\n",
+		 ((pi->private & 0x1) == 0) ? "Xilinx" : "ASIC",
+		 pi->port, pi->mode, mode[pi->mode], pi->delay);
 }
 
 static struct pi_protocol frpw = {
diff --git a/drivers/ata/pata_parport/kbic.c b/drivers/ata/pata_parport/kbic.c
index 8213e62f8f007..6023e071516d4 100644
--- a/drivers/ata/pata_parport/kbic.c
+++ b/drivers/ata/pata_parport/kbic.c
@@ -1,16 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
-        kbic.c    (c) 1997-8  Grant R. Guenther <grant@torque.net>
-                              Under the terms of the GNU General Public License.
-
-        This is a low-level driver for the KBIC-951A and KBIC-971A
-        parallel to IDE adapter chips from KingByte Information Systems.
-
-	The chips are almost identical, however, the wakeup code 
-	required for the 971A interferes with the correct operation of
-        the 951A, so this driver registers itself twice, once for
-	each chip.
-
-*/
+ * (c) 1997-1998  Grant R. Guenther <grant@torque.net>
+ *
+ * This is a low-level driver for the KBIC-951A and KBIC-971A
+ * parallel to IDE adapter chips from KingByte Information Systems.
+ *
+ * The chips are almost identical, however, the wakeup code
+ * required for the 971A interferes with the correct operation of
+ * the 951A, so this driver registers itself twice, once for
+ * each chip.
+ */
 
 #include <linux/module.h>
 #include <linux/init.h>
@@ -21,212 +20,223 @@
 #include <asm/io.h>
 #include "pata_parport.h"
 
-#define r12w()			(delay_p,inw(pi->port+1)&0xffff) 
+#define r12w()		(delay_p, inw(pi->port + 1) & 0xffff)
 
-#define j44(a,b)                ((((a>>4)&0x0f)|(b&0xf0))^0x88)
-#define j53(w)                  (((w>>3)&0x1f)|((w>>4)&0xe0))
+#define j44(a, b)	((((a >> 4) & 0x0f) | (b & 0xf0)) ^ 0x88)
+#define j53(w)		(((w >> 3) & 0x1f) | ((w >> 4) & 0xe0))
 
 
-/* cont = 0 - access the IDE register file 
-   cont = 1 - access the IDE command set 
-*/
-
-static int  cont_map[2] = { 0x80, 0x40 };
+/*
+ * cont = 0 - access the IDE register file
+ * cont = 1 - access the IDE command set
+ */
+static int cont_map[2] = { 0x80, 0x40 };
 
 static int kbic_read_regr(struct pi_adapter *pi, int cont, int regr)
+{
+	int a, b, s;
 
-{       int     a, b, s;
-
-        s = cont_map[cont];
+	s = cont_map[cont];
 
 	switch (pi->mode) {
-
-	case 0: w0(regr|0x18|s); w2(4); w2(6); w2(4); w2(1); w0(8);
-	        a = r1(); w0(0x28); b = r1(); w2(4);
-		return j44(a,b);
-
-	case 1: w0(regr|0x38|s); w2(4); w2(6); w2(4); w2(5); w0(8);
+	case 0:
+		w0(regr | 0x18 | s); w2(4); w2(6); w2(4); w2(1); w0(8);
+		a = r1(); w0(0x28); b = r1(); w2(4);
+		return j44(a, b);
+	case 1:
+		w0(regr|0x38 | s); w2(4); w2(6); w2(4); w2(5); w0(8);
 		a = r12w(); w2(4);
 		return j53(a);
-
-	case 2: w0(regr|0x08|s); w2(4); w2(6); w2(4); w2(0xa5); w2(0xa1);
+	case 2:
+		w0(regr | 0x08 | s); w2(4); w2(6); w2(4); w2(0xa5); w2(0xa1);
 		a = r0(); w2(4);
-       		return a;
-
+		return a;
 	case 3:
 	case 4:
-	case 5: w0(0x20|s); w2(4); w2(6); w2(4); w3(regr);
+	case 5:
+		w0(0x20 | s); w2(4); w2(6); w2(4); w3(regr);
 		a = r4(); b = r4(); w2(4); w2(0); w2(4);
 		return a;
-
 	}
+
 	return -1;
-}       
+}
 
 static void kbic_write_regr(struct pi_adapter *pi, int cont, int regr, int val)
+{
+	int s = cont_map[cont];
 
-{       int  s;
-
-        s = cont_map[cont];
-
-        switch (pi->mode) {
-
-	case 0: 
-        case 1:
-	case 2:	w0(regr|0x10|s); w2(4); w2(6); w2(4); 
+	switch (pi->mode) {
+	case 0:
+	case 1:
+	case 2:
+		w0(regr | 0x10 | s); w2(4); w2(6); w2(4);
 		w0(val); w2(5); w2(4);
 		break;
-
 	case 3:
 	case 4:
-	case 5: w0(0x20|s); w2(4); w2(6); w2(4); w3(regr);
+	case 5:
+		w0(0x20 | s); w2(4); w2(6); w2(4); w3(regr);
 		w4(val); w4(val);
 		w2(4); w2(0); w2(4);
-                break;
-
+		break;
 	}
 }
 
 static void k951_connect(struct pi_adapter *pi)
-
-{ 	pi->saved_r0 = r0();
-        pi->saved_r2 = r2();
-        w2(4); 
+{
+	pi->saved_r0 = r0();
+	pi->saved_r2 = r2();
+	w2(4);
 }
 
 static void k951_disconnect(struct pi_adapter *pi)
-
-{      	w0(pi->saved_r0);
-        w2(pi->saved_r2);
+{
+	w0(pi->saved_r0);
+	w2(pi->saved_r2);
 }
 
-#define	CCP(x)	w2(0xc4);w0(0xaa);w0(0x55);w0(0);w0(0xff);w0(0x87);\
-		w0(0x78);w0(x);w2(0xc5);w2(0xc4);w0(0xff);
+#define	CCP(x)						\
+	do {						\
+		w2(0xc4); w0(0xaa); w0(0x55);		\
+		w0(0); w0(0xff); w0(0x87);		\
+		w0(0x78); w0(x); w2(0xc5);		\
+		w2(0xc4); w0(0xff);			\
+	} while (0)
 
 static void k971_connect(struct pi_adapter *pi)
-
-{ 	pi->saved_r0 = r0();
-        pi->saved_r2 = r2();
+{
+	pi->saved_r0 = r0();
+	pi->saved_r2 = r2();
 	CCP(0x20);
-        w2(4); 
+	w2(4);
 }
 
 static void k971_disconnect(struct pi_adapter *pi)
-
-{       CCP(0x30);
+{
+	CCP(0x30);
 	w0(pi->saved_r0);
-        w2(pi->saved_r2);
+	w2(pi->saved_r2);
 }
 
-/* counts must be congruent to 0 MOD 4, but all known applications
-   have this property.
-*/
-
+/*
+ * count must be congruent to 0 MOD 4, but all known applications
+ *have this property.
+ */
 static void kbic_read_block(struct pi_adapter *pi, char *buf, int count)
+{
+	int k, a, b;
 
-{       int     k, a, b;
-
-        switch (pi->mode) {
-
-        case 0: w0(0x98); w2(4); w2(6); w2(4);
-                for (k=0;k<count/2;k++) {
-			w2(1); w0(8);    a = r1();
-			       w0(0x28); b = r1();
-			buf[2*k]   = j44(a,b);
-			w2(5);           b = r1();
-			       w0(8);    a = r1();
-			buf[2*k+1] = j44(a,b);
+	switch (pi->mode) {
+	case 0:
+		w0(0x98); w2(4); w2(6); w2(4);
+		for (k = 0; k < count / 2; k++) {
+			w2(1); w0(8);
+			a = r1();
+			w0(0x28);
+			b = r1();
+			buf[2 * k] = j44(a, b);
+			w2(5);
+			b = r1();
+			w0(8);
+			a = r1();
+			buf[2 * k + 1] = j44(a, b);
 			w2(4);
-                } 
-                break;
-
-        case 1: w0(0xb8); w2(4); w2(6); w2(4); 
-                for (k=0;k<count/4;k++) {
-                        w0(0xb8); 
-			w2(4); w2(5); 
-                        w0(8);    buf[4*k]   = j53(r12w());
-			w0(0xb8); buf[4*k+1] = j53(r12w());
+		}
+		break;
+	case 1:
+		w0(0xb8); w2(4); w2(6); w2(4);
+		for (k = 0; k < count / 4; k++) {
+			w0(0xb8);
 			w2(4); w2(5);
-			          buf[4*k+3] = j53(r12w());
-			w0(8);    buf[4*k+2] = j53(r12w());
-                }
-                w2(4);
-                break;
-
-        case 2: w0(0x88); w2(4); w2(6); w2(4);
-                for (k=0;k<count/2;k++) {
-                        w2(0xa0); w2(0xa1); buf[2*k] = r0();
-                        w2(0xa5); buf[2*k+1] = r0();
-                }
-                w2(4);
-                break;
-
-        case 3: w0(0xa0); w2(4); w2(6); w2(4); w3(0);
-                for (k=0;k<count;k++) buf[k] = r4();
-                w2(4); w2(0); w2(4);
-                break;
-
-	case 4: w0(0xa0); w2(4); w2(6); w2(4); w3(0);
-                for (k=0;k<count/2;k++) ((u16 *)buf)[k] = r4w();
-                w2(4); w2(0); w2(4);
-                break;
-
-        case 5: w0(0xa0); w2(4); w2(6); w2(4); w3(0);
-                for (k=0;k<count/4;k++) ((u32 *)buf)[k] = r4l();
-                w2(4); w2(0); w2(4);
-                break;
-
-
-        }
+			w0(8);
+			buf[4 * k] = j53(r12w());
+			w0(0xb8);
+			buf[4 * k + 1] = j53(r12w());
+			w2(4); w2(5);
+			buf[4 * k + 3] = j53(r12w());
+			w0(8);
+			buf[4 * k + 2] = j53(r12w());
+		}
+		w2(4);
+		break;
+	case 2:
+		w0(0x88); w2(4); w2(6); w2(4);
+		for (k = 0; k < count / 2; k++) {
+			w2(0xa0); w2(0xa1);
+			buf[2 * k] = r0();
+			w2(0xa5);
+			buf[2 * k + 1] = r0();
+		}
+		w2(4);
+		break;
+	case 3:
+		w0(0xa0); w2(4); w2(6); w2(4); w3(0);
+		for (k = 0; k < count; k++)
+			buf[k] = r4();
+		w2(4); w2(0); w2(4);
+		break;
+	case 4:
+		w0(0xa0); w2(4); w2(6); w2(4); w3(0);
+		for (k = 0; k < count / 2; k++)
+			((u16 *)buf)[k] = r4w();
+		w2(4); w2(0); w2(4);
+		break;
+	case 5:
+		w0(0xa0); w2(4); w2(6); w2(4); w3(0);
+		for (k = 0; k < count / 4; k++)
+			((u32 *)buf)[k] = r4l();
+		w2(4); w2(0); w2(4);
+		break;
+	}
 }
 
 static void kbic_write_block(struct pi_adapter *pi, char *buf, int count)
+{
+	int k;
 
-{       int     k;
-
-        switch (pi->mode) {
-
-        case 0:
-        case 1:
-        case 2: w0(0x90); w2(4); w2(6); w2(4); 
-		for(k=0;k<count/2;k++) {
-			w0(buf[2*k+1]); w2(0); w2(4); 
-			w0(buf[2*k]);   w2(5); w2(4); 
+	switch (pi->mode) {
+	case 0:
+	case 1:
+	case 2:
+		w0(0x90); w2(4); w2(6); w2(4);
+		for (k = 0; k < count / 2; k++) {
+			w0(buf[2 * k + 1]);
+			w2(0); w2(4);
+			w0(buf[2 * k]);
+			w2(5); w2(4);
 		}
 		break;
-
-        case 3: w0(0xa0); w2(4); w2(6); w2(4); w3(0);
-		for(k=0;k<count/2;k++) {
-			w4(buf[2*k+1]); 
-                        w4(buf[2*k]);
-                }
+	case 3:
+		w0(0xa0); w2(4); w2(6); w2(4); w3(0);
+		for (k = 0; k < count / 2; k++) {
+			w4(buf[2 * k + 1]);
+			w4(buf[2 * k]);
+		}
 		w2(4); w2(0); w2(4);
 		break;
-
-	case 4: w0(0xa0); w2(4); w2(6); w2(4); w3(0);
+	case 4:
+		w0(0xa0); w2(4); w2(6); w2(4); w3(0);
 		for (k = 0; k < count / 2; k++)
 			w4w(swab16(((u16 *)buf)[k]));
-                w2(4); w2(0); w2(4);
-                break;
-
-        case 5: w0(0xa0); w2(4); w2(6); w2(4); w3(0);
+		w2(4); w2(0); w2(4);
+		break;
+	case 5:
+		w0(0xa0); w2(4); w2(6); w2(4); w3(0);
 		for (k = 0; k < count / 4; k++)
 			w4l(swab16(((u16 *)buf)[2 * k]) |
 			    swab16(((u16 *)buf)[2 * k + 1]) << 16);
-                w2(4); w2(0); w2(4);
-                break;
-
-        }
-
+		w2(4); w2(0); w2(4);
+		break;
+	}
 }
 
 static void kbic_log_adapter(struct pi_adapter *pi, char *chip)
-
-{       char    *mode_string[6] = {"4-bit","5/3","8-bit",
-				   "EPP-8","EPP_16","EPP-32"};
+{
+	char *mode[6] = { "4-bit", "5/3", "8-bit", "EPP-8", "EPP_16", "EPP-32"};
 
 	dev_info(&pi->dev, "KingByte %s at 0x%x, mode %d (%s), delay %d\n",
-		 chip, pi->port, pi->mode, mode_string[pi->mode], pi->delay);
+		 chip, pi->port, pi->mode, mode[pi->mode], pi->delay);
 }
 
 static void k951_log_adapter(struct pi_adapter *pi)
diff --git a/drivers/ata/pata_parport/ktti.c b/drivers/ata/pata_parport/ktti.c
index 4890b1f123487..bca6c20ef617c 100644
--- a/drivers/ata/pata_parport/ktti.c
+++ b/drivers/ata/pata_parport/ktti.c
@@ -1,12 +1,11 @@
-/* 
-        ktti.c        (c) 1998  Grant R. Guenther <grant@torque.net>
-                          Under the terms of the GNU General Public License.
-
-	ktti.c is a low-level protocol driver for the KT Technology
-	parallel port adapter.  This adapter is used in the "PHd" 
-        portable hard-drives.  As far as I can tell, this device
-	supports 4-bit mode _only_.  
-
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * (c) 1998  Grant R. Guenther <grant@torque.net>
+ *
+ * ktti.c is a low-level protocol driver for the KT Technology
+ * parallel port adapter.  This adapter is used in the "PHd"
+ * portable hard-drives.  As far as I can tell, this device
+ * supports 4-bit mode _only_.
 */
 
 #include <linux/module.h>
@@ -18,80 +17,76 @@
 #include <asm/io.h>
 #include "pata_parport.h"
 
-#define j44(a,b)                (((a>>4)&0x0f)|(b&0xf0))
+#define j44(a, b)	(((a >> 4) & 0x0f) | (b & 0xf0))
 
-/* cont = 0 - access the IDE register file 
-   cont = 1 - access the IDE command set 
-*/
-
-static int  cont_map[2] = { 0x10, 0x08 };
+/*
+ * cont = 0 - access the IDE register file
+ * cont = 1 - access the IDE command set
+ */
+static int cont_map[2] = { 0x10, 0x08 };
 
 static void ktti_write_regr(struct pi_adapter *pi, int cont, int regr, int val)
+{
+	int r = regr + cont_map[cont];
 
-{	int r;
-
-	r = regr + cont_map[cont];
-
-	w0(r); w2(0xb); w2(0xa); w2(3); w2(6); 
+	w0(r); w2(0xb); w2(0xa); w2(3); w2(6);
 	w0(val); w2(3); w0(0); w2(6); w2(0xb);
 }
 
 static int ktti_read_regr(struct pi_adapter *pi, int cont, int regr)
-
-{	int  a, b, r;
+{
+	int a, b, r;
 
         r = regr + cont_map[cont];
 
-        w0(r); w2(0xb); w2(0xa); w2(9); w2(0xc); w2(9); 
+	w0(r); w2(0xb); w2(0xa); w2(9); w2(0xc); w2(9);
 	a = r1(); w2(0xc);  b = r1(); w2(9); w2(0xc); w2(9);
-	return j44(a,b);
-
+	return j44(a, b);
 }
 
 static void ktti_read_block(struct pi_adapter *pi, char *buf, int count)
+{
+	int k, a, b;
 
-{	int  k, a, b;
-
-	for (k=0;k<count/2;k++) {
+	for (k = 0; k < count / 2; k++) {
 		w0(0x10); w2(0xb); w2(0xa); w2(9); w2(0xc); w2(9);
 		a = r1(); w2(0xc); b = r1(); w2(9);
-		buf[2*k] = j44(a,b);
+		buf[2*k] = j44(a, b);
 		a = r1(); w2(0xc); b = r1(); w2(9);
-		buf[2*k+1] = j44(a,b);
+		buf[2*k+1] = j44(a, b);
 	}
 }
 
 static void ktti_write_block(struct pi_adapter *pi, char *buf, int count)
+{
+	int k;
 
-{	int k;
-
-	for (k=0;k<count/2;k++) {
+	for (k = 0; k < count / 2; k++) {
 		w0(0x10); w2(0xb); w2(0xa); w2(3); w2(6);
-		w0(buf[2*k]); w2(3);
-		w0(buf[2*k+1]); w2(6);
+		w0(buf[2 * k]); w2(3);
+		w0(buf[2 * k + 1]); w2(6);
 		w2(0xb);
 	}
 }
 
 static void ktti_connect(struct pi_adapter *pi)
-
-{       pi->saved_r0 = r0();
-        pi->saved_r2 = r2();
-	w2(0xb); w2(0xa); w0(0); w2(3); w2(6);	
+{
+	pi->saved_r0 = r0();
+	pi->saved_r2 = r2();
+	w2(0xb); w2(0xa); w0(0); w2(3); w2(6);
 }
 
 static void ktti_disconnect(struct pi_adapter *pi)
-
-{       w2(0xb); w2(0xa); w0(0xa0); w2(3); w2(4);
+{
+	w2(0xb); w2(0xa); w0(0xa0); w2(3); w2(4);
 	w0(pi->saved_r0);
-        w2(pi->saved_r2);
-} 
+	w2(pi->saved_r2);
+}
 
 static void ktti_log_adapter(struct pi_adapter *pi)
-
 {
 	dev_info(&pi->dev, "KT adapter at 0x%x, delay %d\n",
-		pi->port, pi->delay);
+		 pi->port, pi->delay);
 }
 
 static struct pi_protocol ktti = {
diff --git a/drivers/ata/pata_parport/on20.c b/drivers/ata/pata_parport/on20.c
index 276ace12d4908..34e69da2bec87 100644
--- a/drivers/ata/pata_parport/on20.c
+++ b/drivers/ata/pata_parport/on20.c
@@ -1,10 +1,10 @@
-/* 
-	on20.c	(c) 1996-8  Grant R. Guenther <grant@torque.net>
-		            Under the terms of the GNU General Public License.
-
-        on20.c is a low-level protocol driver for the
-        Onspec 90c20 parallel to IDE adapter. 
-*/
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * (c) 1996-1998  Grant R. Guenther <grant@torque.net>
+ *
+ * on20.c is a low-level protocol driver for the
+ * Onspec 90c20 parallel to IDE adapter.
+ */
 
 #include <linux/module.h>
 #include <linux/init.h>
@@ -15,99 +15,114 @@
 #include <asm/io.h>
 #include "pata_parport.h"
 
-#define op(f)	w2(4);w0(f);w2(5);w2(0xd);w2(5);w2(0xd);w2(5);w2(4);
-#define vl(v)	w2(4);w0(v);w2(5);w2(7);w2(5);w2(4);
-
-#define j44(a,b)  (((a>>4)&0x0f)|(b&0xf0))
-
-/* cont = 0 - access the IDE register file 
-   cont = 1 - access the IDE command set 
-*/
-
-static int on20_read_regr(struct pi_adapter *pi, int cont, int regr)
-
-{	int h,l, r ;
+#define op(f)					\
+	do {					\
+		w2(4); w0(f); w2(5); w2(0xd);	\
+		w2(5); w2(0xd); w2(5); w2(4);	\
+	} while (0)
 
-        r = (regr<<2) + 1 + cont;
+#define vl(v)					\
+	do {					\
+		w2(4); w0(v); w2(5);		\
+		w2(7); w2(5); w2(4);		\
+	} while (0)
 
-        op(1); vl(r); op(0);
+#define j44(a, b)	(((a >> 4) & 0x0f) | (b & 0xf0))
 
-	switch (pi->mode)  {
-
-        case 0:  w2(4); w2(6); l = r1();
-                 w2(4); w2(6); h = r1();
-                 w2(4); w2(6); w2(4); w2(6); w2(4);
-		 return j44(l,h);
-
-	case 1:  w2(4); w2(0x26); r = r0(); 
-                 w2(4); w2(0x26); w2(4);
-		 return r;
+/*
+ * cont = 0 - access the IDE register file
+ * cont = 1 - access the IDE command set
+ */
 
+static int on20_read_regr(struct pi_adapter *pi, int cont, int regr)
+{
+	int h, l, r;
+
+	r = (regr << 2) + 1 + cont;
+
+	op(1); vl(r); op(0);
+
+	switch (pi->mode) {
+	case 0:
+		w2(4); w2(6); l = r1();
+		w2(4); w2(6); h = r1();
+		w2(4); w2(6); w2(4); w2(6); w2(4);
+		return j44(l, h);
+	case 1:
+		w2(4); w2(0x26); r = r0();
+		w2(4); w2(0x26); w2(4);
+		return r;
 	}
+
 	return -1;
-}	
+}
 
 static void on20_write_regr(struct pi_adapter *pi, int cont, int regr, int val)
+{
+	int r = (regr << 2) + 1 + cont;
 
-{	int r;
-
-	r = (regr<<2) + 1 + cont;
-
-	op(1); vl(r); 
-	op(0); vl(val); 
+	op(1); vl(r);
+	op(0); vl(val);
 	op(0); vl(val);
 }
 
 static void on20_connect(struct pi_adapter *pi)
-
-{	pi->saved_r0 = r0();
-        pi->saved_r2 = r2();
-
-	w2(4);w0(0);w2(0xc);w2(4);w2(6);w2(4);w2(6);w2(4); 
-	if (pi->mode) { op(2); vl(8); op(2); vl(9); }
-	       else   { op(2); vl(0); op(2); vl(8); }
+{
+	pi->saved_r0 = r0();
+	pi->saved_r2 = r2();
+
+	w2(4); w0(0); w2(0xc); w2(4); w2(6); w2(4); w2(6); w2(4);
+	if (pi->mode) {
+		op(2); vl(8); op(2); vl(9);
+	} else {
+		op(2); vl(0); op(2); vl(8);
+	}
 }
 
 static void on20_disconnect(struct pi_adapter *pi)
-
-{	w2(4);w0(7);w2(4);w2(0xc);w2(4);
-        w0(pi->saved_r0);
-        w2(pi->saved_r2);
-} 
+{
+	w2(4); w0(7); w2(4); w2(0xc); w2(4);
+	w0(pi->saved_r0);
+	w2(pi->saved_r2);
+}
 
 static void on20_read_block(struct pi_adapter *pi, char *buf, int count)
-
-{	int     k, l, h; 
+{
+	int k, l, h;
 
 	op(1); vl(1); op(0);
 
-	for (k=0;k<count;k++) 
-	    if (pi->mode) {
-		w2(4); w2(0x26); buf[k] = r0();
-	    } else {
-		w2(6); l = r1(); w2(4);
-		w2(6); h = r1(); w2(4);
-		buf[k] = j44(l,h);
-	    }
+	for (k = 0; k < count; k++) {
+		if (pi->mode) {
+			w2(4); w2(0x26); buf[k] = r0();
+		} else {
+			w2(6); l = r1(); w2(4);
+			w2(6); h = r1(); w2(4);
+			buf[k] = j44(l, h);
+		}
+	}
 	w2(4);
 }
 
 static void on20_write_block(struct pi_adapter *pi, char *buf, int count)
-
-{	int	k;
+{
+	int k;
 
 	op(1); vl(1); op(0);
 
-	for (k=0;k<count;k++) { w2(5); w0(buf[k]); w2(7); }
+	for (k = 0; k < count; k++) {
+		w2(5); w0(buf[k]); w2(7);
+	}
 	w2(4);
 }
 
 static void on20_log_adapter(struct pi_adapter *pi)
+{
+	char *mode_string[2] = { "4-bit", "8-bit" };
 
-{       char    *mode_string[2] = {"4-bit","8-bit"};
-
-	dev_info(&pi->dev, "OnSpec 90c20 at 0x%x, mode %d (%s), delay %d\n",
-		pi->port, pi->mode, mode_string[pi->mode], pi->delay);
+	dev_info(&pi->dev,
+		 "OnSpec 90c20 at 0x%x, mode %d (%s), delay %d\n",
+		 pi->port, pi->mode, mode_string[pi->mode], pi->delay);
 }
 
 static struct pi_protocol on20 = {
diff --git a/drivers/ata/pata_parport/on26.c b/drivers/ata/pata_parport/on26.c
index dc47a54b121ff..5da317b394c18 100644
--- a/drivers/ata/pata_parport/on26.c
+++ b/drivers/ata/pata_parport/on26.c
@@ -1,11 +1,10 @@
-/* 
-        on26.c    (c) 1997-8  Grant R. Guenther <grant@torque.net>
-                              Under the terms of the GNU General Public License.
-
-        on26.c is a low-level protocol driver for the 
-        OnSpec 90c26 parallel to IDE adapter chip.
-
-*/
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * (c) 1997-1998  Grant R. Guenther <grant@torque.net>
+ *
+ * on26.c is a low-level protocol driver for the
+ * OnSpec 90c26 parallel to IDE adapter chip.
+ */
 
 #include <linux/module.h>
 #include <linux/init.h>
@@ -16,260 +15,281 @@
 #include <asm/io.h>
 #include "pata_parport.h"
 
-/* mode codes:  0  nybble reads, 8-bit writes
-                1  8-bit reads and writes
-                2  8-bit EPP mode
-		3  EPP-16
-		4  EPP-32
-*/
+/*
+ * mode codes:  0  nybble reads, 8-bit writes
+ *		1  8-bit reads and writes
+ *		2  8-bit EPP mode
+ *		3  EPP-16
+ *		4  EPP-32
+ */
 
-#define j44(a,b)  (((a>>4)&0x0f)|(b&0xf0))
+#define j44(a, b)	(((a >> 4) & 0x0f) | (b & 0xf0))
 
-#define P1	w2(5);w2(0xd);w2(5);w2(0xd);w2(5);w2(4);
-#define P2	w2(5);w2(7);w2(5);w2(4);
+#define P1						      \
+	do {						      \
+		w2(5); w2(0xd); w2(5); w2(0xd); w2(5); w2(4); \
+	} while (0)
 
-/* cont = 0 - access the IDE register file 
-   cont = 1 - access the IDE command set 
-*/
-
-static int on26_read_regr(struct pi_adapter *pi, int cont, int regr)
+#define P2					\
+	do {					\
+		w2(5); w2(7); w2(5); w2(4);	\
+	} while (0)
 
-{       int     a, b, r;
+/*
+ * cont = 0 - access the IDE register file
+ * cont = 1 - access the IDE command set
+ */
 
-	r = (regr<<2) + 1 + cont;
+static int on26_read_regr(struct pi_adapter *pi, int cont, int regr)
+{
+	int a, b, r;
 
-        switch (pi->mode)  {
+	r = (regr << 2) + 1 + cont;
 
-        case 0: w0(1); P1; w0(r); P2; w0(0); P1; 
+	switch (pi->mode) {
+	case 0:
+		w0(1); P1; w0(r); P2; w0(0); P1;
 		w2(6); a = r1(); w2(4);
 		w2(6); b = r1(); w2(4);
 		w2(6); w2(4); w2(6); w2(4);
-                return j44(a,b);
-
-        case 1: w0(1); P1; w0(r); P2; w0(0); P1;
+		return j44(a, b);
+	case 1:
+		w0(1); P1; w0(r); P2; w0(0); P1;
 		w2(0x26); a = r0(); w2(4); w2(0x26); w2(4);
-                return a;
-
+		return a;
 	case 2:
 	case 3:
-        case 4: w3(1); w3(1); w2(5); w4(r); w2(4);
+	case 4:
+		w3(1); w3(1); w2(5); w4(r); w2(4);
 		w3(0); w3(0); w2(0x24); a = r4(); w2(4);
 		w2(0x24); (void)r4(); w2(4);
-                return a;
+		return a;
+	}
 
-        }
-        return -1;
-}       
+	return -1;
+}
 
 static void on26_write_regr(struct pi_adapter *pi, int cont, int regr, int val)
+{
+	int r = (regr << 2) + 1 + cont;
 
-{       int  r;
-
-        r = (regr<<2) + 1 + cont;
-
-        switch (pi->mode)  {
-
-        case 0:
-        case 1: w0(1); P1; w0(r); P2; w0(0); P1;
+	switch (pi->mode) {
+	case 0:
+	case 1:
+		w0(1); P1; w0(r); P2; w0(0); P1;
 		w0(val); P2; w0(val); P2;
 		break;
-
 	case 2:
 	case 3:
-        case 4: w3(1); w3(1); w2(5); w4(r); w2(4);
-		w3(0); w3(0); 
+	case 4:
+		w3(1); w3(1); w2(5); w4(r); w2(4);
+		w3(0); w3(0);
 		w2(5); w4(val); w2(4);
 		w2(5); w4(val); w2(4);
-                break;
-        }
+		break;
+	}
 }
 
-#define  CCP(x)  w0(0xfe);w0(0xaa);w0(0x55);w0(0);w0(0xff);\
-		 w0(0x87);w0(0x78);w0(x);w2(4);w2(5);w2(4);w0(0xff);
+#define CCP(x)						\
+	do {						\
+		w0(0xfe); w0(0xaa); w0(0x55); w0(0);	\
+		w0(0xff); w0(0x87); w0(0x78); w0(x);	\
+		w2(4); w2(5); w2(4); w0(0xff);		\
+	} while (0)
 
 static void on26_connect(struct pi_adapter *pi)
-
-{       int	x;
+{
+	int x;
 
 	pi->saved_r0 = r0();
-        pi->saved_r2 = r2();
+	pi->saved_r2 = r2();
 
-        CCP(0x20);
-	x = 8; if (pi->mode) x = 9;
+	CCP(0x20);
+	if (pi->mode)
+		x = 9;
+	else
+		x = 8;
 
 	w0(2); P1; w0(8); P2;
 	w0(2); P1; w0(x); P2;
 }
 
 static void on26_disconnect(struct pi_adapter *pi)
-
-{       if (pi->mode >= 2) { w3(4); w3(4); w3(4); w3(4); }
-	              else { w0(4); P1; w0(4); P1; }
+{
+	if (pi->mode >= 2) {
+		w3(4); w3(4); w3(4); w3(4);
+	} else {
+		w0(4); P1; w0(4); P1;
+	}
 	CCP(0x30);
-        w0(pi->saved_r0);
-        w2(pi->saved_r2);
-} 
+	w0(pi->saved_r0);
+	w2(pi->saved_r2);
+}
 
 #define	RESET_WAIT  200
 
-static int on26_test_port(struct pi_adapter *pi)  /* hard reset */
+/* hard reset */
+static int on26_test_port(struct pi_adapter *pi)
+{
+	int i, m, d, x = 0, y = 0;
 
-{       int     i, m, d, x=0, y=0;
-
-        pi->saved_r0 = r0();
-        pi->saved_r2 = r2();
-
-        d = pi->delay;
-        m = pi->mode;
-        pi->delay = 5;
-        pi->mode = 0;
-
-        w2(0xc);
-
-        CCP(0x30); CCP(0); 
-
-        w0(0xfe);w0(0xaa);w0(0x55);w0(0);w0(0xff);
-        i = ((r1() & 0xf0) << 4); w0(0x87);
-        i |= (r1() & 0xf0); w0(0x78);
-        w0(0x20);w2(4);w2(5);
-        i |= ((r1() & 0xf0) >> 4);
-        w2(4);w0(0xff);
-
-        if (i == 0xb5f) {
-
-            w0(2); P1; w0(0);   P2;
-            w0(3); P1; w0(0);   P2;
-            w0(2); P1; w0(8);   P2; udelay(100);
-            w0(2); P1; w0(0xa); P2; udelay(100);
-            w0(2); P1; w0(8);   P2; udelay(1000);
-            
-            on26_write_regr(pi,0,6,0xa0);
-
-            for (i=0;i<RESET_WAIT;i++) {
-                on26_write_regr(pi,0,6,0xa0);
-                x = on26_read_regr(pi,0,7);
-                on26_write_regr(pi,0,6,0xb0);
-                y = on26_read_regr(pi,0,7);
-                if (!((x&0x80)||(y&0x80))) break;
-                mdelay(100);
-            }
-
-	    if (i == RESET_WAIT) 
-		dev_err(&pi->dev, "on26: Device reset failed (%x,%x)\n", x, y);
-
-            w0(4); P1; w0(4); P1;
-        }
+	pi->saved_r0 = r0();
+	pi->saved_r2 = r2();
+
+	d = pi->delay;
+	m = pi->mode;
+	pi->delay = 5;
+	pi->mode = 0;
+
+	w2(0xc);
+
+	CCP(0x30); CCP(0);
+
+	w0(0xfe); w0(0xaa); w0(0x55); w0(0); w0(0xff);
+	i = ((r1() & 0xf0) << 4); w0(0x87);
+	i |= (r1() & 0xf0); w0(0x78);
+	w0(0x20); w2(4); w2(5);
+	i |= ((r1() & 0xf0) >> 4);
+	w2(4); w0(0xff);
+
+	if (i == 0xb5f) {
+		w0(2); P1; w0(0);   P2;
+		w0(3); P1; w0(0);   P2;
+		w0(2); P1; w0(8);   P2; udelay(100);
+		w0(2); P1; w0(0xa); P2; udelay(100);
+		w0(2); P1; w0(8);   P2; udelay(1000);
+
+		on26_write_regr(pi, 0, 6, 0xa0);
+
+		for (i = 0; i < RESET_WAIT; i++) {
+			on26_write_regr(pi, 0, 6, 0xa0);
+			x = on26_read_regr(pi, 0, 7);
+			on26_write_regr(pi, 0, 6, 0xb0);
+			y = on26_read_regr(pi, 0, 7);
+			if (!((x & 0x80) || (y & 0x80)))
+				break;
+			mdelay(100);
+		}
+
+		if (i == RESET_WAIT)
+			dev_err(&pi->dev,
+				"on26: Device reset failed (%x,%x)\n", x, y);
+
+		w0(4); P1; w0(4); P1;
+	}
 
-        CCP(0x30);
+	CCP(0x30);
 
-        pi->delay = d;
-        pi->mode = m;
-        w0(pi->saved_r0);
-        w2(pi->saved_r2);
+	pi->delay = d;
+	pi->mode = m;
+	w0(pi->saved_r0);
+	w2(pi->saved_r2);
 
-        return 5;
+	return 5;
 }
 
-
 static void on26_read_block(struct pi_adapter *pi, char *buf, int count)
+{
+	int k, a, b;
 
-{       int     k, a, b;
-
-        switch (pi->mode) {
-
-        case 0: w0(1); P1; w0(1); P2; w0(2); P1; w0(0x18); P2; w0(0); P1;
+	switch (pi->mode) {
+	case 0:
+		w0(1); P1; w0(1); P2; w0(2); P1; w0(0x18); P2; w0(0); P1;
 		udelay(10);
-		for (k=0;k<count;k++) {
-                        w2(6); a = r1();
-                        w2(4); b = r1();
-                        buf[k] = j44(a,b);
-                }
-		w0(2); P1; w0(8); P2; 
-                break;
-
-        case 1: w0(1); P1; w0(1); P2; w0(2); P1; w0(0x19); P2; w0(0); P1;
+		for (k = 0; k < count; k++) {
+			w2(6); a = r1();
+			w2(4); b = r1();
+			buf[k] = j44(a, b);
+		}
+		w0(2); P1; w0(8); P2;
+		break;
+	case 1:
+		w0(1); P1; w0(1); P2; w0(2); P1; w0(0x19); P2; w0(0); P1;
+		udelay(10);
+		for (k = 0; k < count / 2; k++) {
+			w2(0x26); buf[2 * k] = r0();
+			w2(0x24); buf[2 * k + 1] = r0();
+		}
+		w0(2); P1; w0(9); P2;
+		break;
+	case 2:
+		w3(1); w3(1); w2(5); w4(1); w2(4);
+		w3(0); w3(0); w2(0x24);
+		udelay(10);
+		for (k = 0; k < count; k++)
+			buf[k] = r4();
+		w2(4);
+		break;
+	case 3:
+		w3(1); w3(1); w2(5); w4(1); w2(4);
+		w3(0); w3(0); w2(0x24);
 		udelay(10);
-                for (k=0;k<count/2;k++) {
-                        w2(0x26); buf[2*k] = r0();  
-			w2(0x24); buf[2*k+1] = r0();
-                }
-                w0(2); P1; w0(9); P2;
-                break;
-
-        case 2: w3(1); w3(1); w2(5); w4(1); w2(4);
+		for (k = 0; k < count / 2; k++)
+			((u16 *)buf)[k] = r4w();
+		w2(4);
+		break;
+	case 4:
+		w3(1); w3(1); w2(5); w4(1); w2(4);
 		w3(0); w3(0); w2(0x24);
 		udelay(10);
-                for (k=0;k<count;k++) buf[k] = r4();
-                w2(4);
-                break;
-
-        case 3: w3(1); w3(1); w2(5); w4(1); w2(4);
-                w3(0); w3(0); w2(0x24);
-                udelay(10);
-                for (k=0;k<count/2;k++) ((u16 *)buf)[k] = r4w();
-                w2(4);
-                break;
-
-        case 4: w3(1); w3(1); w2(5); w4(1); w2(4);
-                w3(0); w3(0); w2(0x24);
-                udelay(10);
-                for (k=0;k<count/4;k++) ((u32 *)buf)[k] = r4l();
-                w2(4);
-                break;
-
-        }
+		for (k = 0; k < count / 4; k++)
+			((u32 *)buf)[k] = r4l();
+		w2(4);
+		break;
+	}
 }
 
 static void on26_write_block(struct pi_adapter *pi, char *buf, int count)
-
-{       int	k;
-
-        switch (pi->mode) {
-
-        case 0: 
-        case 1: w0(1); P1; w0(1); P2; 
-		w0(2); P1; w0(0x18+pi->mode); P2; w0(0); P1;
+{
+	int k;
+
+	switch (pi->mode) {
+	case 0:
+	case 1:
+		w0(1); P1; w0(1); P2;
+		w0(2); P1; w0(0x18 + pi->mode); P2; w0(0); P1;
 		udelay(10);
-		for (k=0;k<count/2;k++) {
-                        w2(5); w0(buf[2*k]); 
-			w2(7); w0(buf[2*k+1]);
-                }
-                w2(5); w2(4);
-		w0(2); P1; w0(8+pi->mode); P2;
-                break;
-
-        case 2: w3(1); w3(1); w2(5); w4(1); w2(4);
+		for (k = 0; k < count / 2; k++) {
+			w2(5); w0(buf[2 * k]);
+			w2(7); w0(buf[2 * k + 1]);
+		}
+		w2(5); w2(4);
+		w0(2); P1; w0(8 + pi->mode); P2;
+		break;
+	case 2:
+		w3(1); w3(1); w2(5); w4(1); w2(4);
 		w3(0); w3(0); w2(0xc5);
 		udelay(10);
-                for (k=0;k<count;k++) w4(buf[k]);
+		for (k = 0; k < count; k++)
+			w4(buf[k]);
 		w2(0xc4);
-                break;
-
-        case 3: w3(1); w3(1); w2(5); w4(1); w2(4);
-                w3(0); w3(0); w2(0xc5);
-                udelay(10);
-                for (k=0;k<count/2;k++) w4w(((u16 *)buf)[k]);
-                w2(0xc4);
-                break;
-
-        case 4: w3(1); w3(1); w2(5); w4(1); w2(4);
-                w3(0); w3(0); w2(0xc5);
-                udelay(10);
-                for (k=0;k<count/4;k++) w4l(((u32 *)buf)[k]);
-                w2(0xc4);
-                break;
-
-        }
-
+		break;
+	case 3:
+		w3(1); w3(1); w2(5); w4(1); w2(4);
+		w3(0); w3(0); w2(0xc5);
+		udelay(10);
+		for (k = 0; k < count / 2; k++)
+			w4w(((u16 *)buf)[k]);
+		w2(0xc4);
+		break;
+	case 4:
+		w3(1); w3(1); w2(5); w4(1); w2(4);
+		w3(0); w3(0); w2(0xc5);
+		udelay(10);
+		for (k = 0; k < count / 4; k++)
+			w4l(((u32 *)buf)[k]);
+		w2(0xc4);
+		break;
+	}
 }
 
 static void on26_log_adapter(struct pi_adapter *pi)
+{
+	char *mode_string[5] = { "4-bit", "8-bit", "EPP-8", "EPP-16", "EPP-32" };
 
-{       char    *mode_string[5] = {"4-bit","8-bit","EPP-8",
-				   "EPP-16","EPP-32"};
-
-	dev_info(&pi->dev, "OnSpec 90c26 at 0x%x, mode %d (%s), delay %d\n",
-		pi->port, pi->mode, mode_string[pi->mode], pi->delay);
+	dev_info(&pi->dev,
+		 "OnSpec 90c26 at 0x%x, mode %d (%s), delay %d\n",
+		 pi->port, pi->mode, mode_string[pi->mode], pi->delay);
 }
 
 static struct pi_protocol on26 = {
diff --git a/drivers/ata/pata_platform.c b/drivers/ata/pata_platform.c
index 87479bc893b25..232c3dad7ee88 100644
--- a/drivers/ata/pata_platform.c
+++ b/drivers/ata/pata_platform.c
@@ -223,7 +223,7 @@ static int pata_platform_probe(struct platform_device *pdev)
 
 static struct platform_driver pata_platform_driver = {
 	.probe		= pata_platform_probe,
-	.remove		= ata_platform_remove_one,
+	.remove_new	= ata_platform_remove_one,
 	.driver = {
 		.name		= DRV_NAME,
 	},
diff --git a/drivers/ata/sata_highbank.c b/drivers/ata/sata_highbank.c
index 8237ece4a46fe..d6b324d03e597 100644
--- a/drivers/ata/sata_highbank.c
+++ b/drivers/ata/sata_highbank.c
@@ -614,7 +614,7 @@ static SIMPLE_DEV_PM_OPS(ahci_highbank_pm_ops,
 		  ahci_highbank_suspend, ahci_highbank_resume);
 
 static struct platform_driver ahci_highbank_driver = {
-	.remove = ata_platform_remove_one,
+	.remove_new = ata_platform_remove_one,
         .driver = {
                 .name = "highbank-ahci",
                 .of_match_table = ahci_of_match,
diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c
index c47c3fb434d53..598a872f6a08c 100644
--- a/drivers/ata/sata_svw.c
+++ b/drivers/ata/sata_svw.c
@@ -32,6 +32,7 @@
 #include <scsi/scsi.h>
 #include <linux/libata.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
 
 #define DRV_NAME	"sata_svw"
 #define DRV_VERSION	"2.3"
@@ -319,10 +320,11 @@ static int k2_sata_show_info(struct seq_file *m, struct Scsi_Host *shost)
 	/* Match it to a port node */
 	index = (ap == ap->host->ports[0]) ? 0 : 1;
 	for (np = np->child; np != NULL; np = np->sibling) {
-		const u32 *reg = of_get_property(np, "reg", NULL);
-		if (!reg)
+		u64 reg;
+
+		if (of_property_read_reg(np, 0, &reg, NULL))
 			continue;
-		if (index == *reg) {
+		if (index == reg) {
 			seq_printf(m, "devspec: %pOF\n", np);
 			break;
 		}