Accessiblity: speakup_spkout: specifying the default driver parameters among the module params

This is an enhancement which allows to specify the default driver
parameters among the module parameters.

Adding default variables to the speakup_spkout module
allows to easily set that at boot, rather than
setting the sys variables after boot.
More details can be found here:
https://github.com/linux-speakup/speakup/issues/7

Signed-off-by: Osama Muhammad <osmtendev@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Link: https://lore.kernel.org/r/20221109215108.7933-13-osmtendev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 34 insertions, 9 deletions

diff --git a/drivers/accessibility/speakup/speakup_spkout.c b/drivers/accessibility/speakup/speakup_spkout.c
index 5e3bb3aa98b62e..d3f26095b0eef9 100644
--- a/drivers/accessibility/speakup/speakup_spkout.c
+++ b/drivers/accessibility/speakup/speakup_spkout.c
@@ -18,15 +18,26 @@
 
 static void synth_flush(struct spk_synth *synth);
 
-static struct var_t vars[] = {
-	{ CAPS_START, .u.s = {"\x05P+" } },
-	{ CAPS_STOP, .u.s = {"\x05P-" } },
-	{ RATE, .u.n = {"\x05R%d", 7, 0, 9, 0, 0, NULL } },
-	{ PITCH, .u.n = {"\x05P%d", 3, 0, 9, 0, 0, NULL } },
-	{ VOL, .u.n = {"\x05V%d", 9, 0, 9, 0, 0, NULL } },
-	{ TONE, .u.n = {"\x05T%c", 8, 0, 25, 65, 0, NULL } },
-	{ PUNCT, .u.n = {"\x05M%c", 0, 0, 3, 0, 0, "nsma" } },
-	{ DIRECT, .u.n = {NULL, 0, 0, 1, 0, 0, NULL } },
+
+
+enum default_vars_id {
+	CAPS_START_ID = 0, CAPS_STOP_ID,
+	RATE_ID, PITCH_ID,
+	VOL_ID, TONE_ID, PUNCT_ID,
+	DIRECT_ID, V_LAST_VAR_ID,
+	NB_ID
+};
+
+
+static struct var_t vars[NB_ID] = {
+	[CAPS_START_ID] = { CAPS_START, .u.s = {"\x05P+" } },
+	[CAPS_STOP_ID] = { CAPS_STOP, .u.s = {"\x05P-" } },
+	[RATE_ID] = { RATE, .u.n = {"\x05R%d", 7, 0, 9, 0, 0, NULL } },
+	[PITCH_ID] = { PITCH, .u.n = {"\x05P%d", 3, 0, 9, 0, 0, NULL } },
+	[VOL_ID] = { VOL, .u.n = {"\x05V%d", 9, 0, 9, 0, 0, NULL } },
+	[TONE_ID] = { TONE, .u.n = {"\x05T%c", 8, 0, 25, 65, 0, NULL } },
+	[PUNCT_ID] = { PUNCT, .u.n = {"\x05M%c", 0, 0, 3, 0, 0, "nsma" } },
+	[DIRECT_ID] = { DIRECT, .u.n = {NULL, 0, 0, 1, 0, 0, NULL } },
 	V_LAST_VAR
 };
 
@@ -124,10 +135,24 @@ static void synth_flush(struct spk_synth *synth)
 module_param_named(ser, synth_spkout.ser, int, 0444);
 module_param_named(dev, synth_spkout.dev_name, charp, 0444);
 module_param_named(start, synth_spkout.startup, short, 0444);
+module_param_named(rate, vars[RATE_ID].u.n.default_val, int, 0444);
+module_param_named(vol, vars[PITCH_ID].u.n.default_val, int, 0444);
+module_param_named(tone, vars[TONE_ID].u.n.default_val, int, 0444);
+module_param_named(punct, vars[PUNCT_ID].u.n.default_val, int, 0444);
+module_param_named(direct, vars[DIRECT_ID].u.n.default_val, int, 0444);
+
+
 
 MODULE_PARM_DESC(ser, "Set the serial port for the synthesizer (0-based).");
 MODULE_PARM_DESC(dev, "Set the device e.g. ttyUSB0, for the synthesizer.");
 MODULE_PARM_DESC(start, "Start the synthesizer once it is loaded.");
+MODULE_PARM_DESC(rate, "Set the rate variable on load.");
+MODULE_PARM_DESC(vol, "Set the vol variable on load.");
+MODULE_PARM_DESC(tone, "Set the tone variable on load.");
+MODULE_PARM_DESC(punct, "Set the punct variable on load.");
+MODULE_PARM_DESC(direct, "Set the direct variable on load.");
+
+
 
 module_spk_synth(synth_spkout);