diff options
| author | Frank Li <Frank.Li@nxp.com> | 2024-04-01 18:25:04 -0400 |
|---|---|---|
| committer | Shawn Guo <shawnguo@kernel.org> | 2024-04-03 20:44:08 +0800 |
| commit | 808e7716edcdb39d3498b9f567ef6017858b49aa (patch) | |
| tree | 0dda55926a8714193f889a04b94af42c298fe24f /arch | |
| parent | 1d86c2b3946e69d6b0b93568d312aae6247847c0 (diff) | |
| download | linux-808e7716edcdb39d3498b9f567ef6017858b49aa.tar.gz | |
arm64: dts: imx8-ss-conn: fix usb lpcg indices
usb2_lpcg: clock-controller@5b270000 {
... Col1 Col2
clocks = <&conn_ahb_clk>, <&conn_ipg_clk>; // 0 6
clock-indices = <IMX_LPCG_CLK_6>, <IMX_LPCG_CLK_7>; // 0 7
...
};
Col1: index, which existing dts try to get.
Col2: actual index in lpcg driver.
usbotg1: usb@5b0d0000 {
...
clocks = <&usb2_lpcg 0>;
^^
Should be:
clocks = <&usb2_lpcg IMX_LPCG_CLK_6>;
};
usbphy1: usbphy@5b100000 {
clocks = <&usb2_lpcg 1>;
^^
SHould be:
clocks = <&usb2_lpcg IMX_LPCG_CLK_7>;
};
Arg0 is divided by 4 in lpcg driver. So lpcg will do dummy enable. Fix it
by use correct clock indices.
Cc: stable@vger.kernel.org
Fixes: 8065fc937f0f ("arm64: dts: imx8dxl: add usb1 and usb2 support")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi index af2259e997967e..4aaf5a0c1ed8af 100644 --- a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi @@ -41,7 +41,7 @@ conn_subsys: bus@5b000000 { interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>; fsl,usbphy = <&usbphy1>; fsl,usbmisc = <&usbmisc1 0>; - clocks = <&usb2_lpcg 0>; + clocks = <&usb2_lpcg IMX_LPCG_CLK_6>; ahb-burst-config = <0x0>; tx-burst-size-dword = <0x10>; rx-burst-size-dword = <0x10>; @@ -58,7 +58,7 @@ conn_subsys: bus@5b000000 { usbphy1: usbphy@5b100000 { compatible = "fsl,imx7ulp-usbphy"; reg = <0x5b100000 0x1000>; - clocks = <&usb2_lpcg 1>; + clocks = <&usb2_lpcg IMX_LPCG_CLK_7>; power-domains = <&pd IMX_SC_R_USB_0_PHY>; status = "disabled"; }; |